3-253-938-11(1)
Portable
MiniDisc Recorder
Operating Instructions
“WALKMAN” is a registered trademark of Sony Corporation to
represent Headphone Stereo products.
trademark of Sony Corporation.
is a
MZ-N910
©2003 Sony Corporation
Information
WARNING
IN NO EVENT SHALL SELLER BE
LIABLE FOR ANY DIRECT,
INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR
THE USE OF ANY PRODUCT.
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
The validity of the CE marking is
restricted to only those countries where it
is legally enforced, mainly in the
countries EEA (European Economic
Area).
To prevent fire, do not cover the
ventilation of the apparatus with news
papers, table cloths, curtains, etc. And
don’t place lighted candles on the
apparatus.
• SonicStage, OpenMG and the OpenMG
logo, MagicGate Memory Stick and the
MagicGate Memory Stick logo,
Memory Stick and the Memory Stick
logo, Net MD and the Net MD logo are
trademarks of Sony Corporation.
• Microsoft, Windows, Windows NT and
Windows Media are trademarks or
registered trademarks of Microsoft
Corporation in the United States and /or
other countries.
• IBM and PC/AT are registered
trademarks of International Business
Machines Corporation.
• Macintosh is a trademark of Apple
Computer, Inc. in the United States and/
or other countries.
To prevent fire or shock hazard, do not
place objects filled with liquids, such as
vases, on the apparatus.
Certain countries may regulate disposal of
the battery used to power this product.
Please consult with your local authority.
Caution
The use of optical instruments with this
product will increase eye hazard.
CAUTION — INVISIBLE LASER
RADIATION WHEN OPEN
AVOID EXPOSURE TO BEAM
• MMX and Pentium are trademarks or
registered trademarks of Intel
Corporation.
• All other trademarks and registered
trademarks are trademarks or registered
trademarks of their respective holders.
• ™ and ® marks are omitted in this
manual.
2
Notice for users
On the supplied software
• Copyright laws prohibit reproducing the
software or the manual accompanying it
in whole or in part, or renting the
software without the permission of the
copyright holder.
• In no event will SONY be liable for any
financial damage, or loss of profits,
including claims made by third parties,
arising out of the use of the software
supplied with this recorder.
• In the event a problem occurs with this
software as a result of defective
manufacturing, SONY will replace it.
However, SONY bears no other
responsibility.
• The software provided with this
recorder cannot be used with equipment
other than that which is so designated.
• Please note that, due to continued efforts
to improve quality, the software
specifications may be changed without
notice.
• Operation of this recorder with software
other than that provided is not covered
by the warranty.
Program © 2001, 2002 Sony Corporation
Documentation © 2003 Sony Corporation
3
Table of contents
Recorder Operation
(Synchro-recording) ........................................................................26
Surround) .........................................................................34
4
Labeling ......................................................................................... 40
Re-labeling ..................................................................................... 41
Rehearsal) ....................................................................... 43
Repeat play for the selected group play mode
5
(Contrast Adjustment) .....................................................65
Storing the settings for individual discs
6
Software Operation
Transferring audio data from your computer to the
computer ........................................................................107
Listening to an MD with the Net MD disconnected from the
8
For users with OpenMG Jukebox, SonicStage, or SonicStage
For Windows Millennium Edition/Windows 98 Second Edition
Troubleshooting ................................................................................. 116
Glossary ............................................................................................. 124
9
Before using this product
This manual explains the recorder operations and the installation and basic use of the
supplied SonicStage software. For details on the various operations, refer to the pages
indicated below.
When using the recorder
3-000-000-11(1)
Recorder Operation (pages 11 to 91)
Portable
MiniDisc Recorder
ordinary MiniDisc Walkman.
Operating Instructions
page 13
Recorder Operation ____________________
page 94
Software Operation ___________________
Troubleshooting and explanations (page 77)
This section shows the troubles you may find while using the recorder,
and their solutions.
ìWALKMANî is
a
registered trademark of Sony Corporation to
represent Headphone Stereo products.
trademark of Sony Corporation.
is
a
MZ-N910
©2003 Sony Corporation
When using the Net MD (the recorder) connected to your
computer
SonicStage software. Refer to these pages for details.
Other information (page 110)
This section shows the troubles you may find while using the SonicStage software, and
their solutions. It also has the list of frequently asked questions and answers.
SonicStage Ver. 1.5 Help
This is an online help that you can view on your computer
screen.
Refer to online help for details on the use of the software. To
display the help window, see page 108.
Notes on the “Software Operation” section
• The displayed items in the illustrations that appear in this section may differ from the actual items
displayed by the software.
• Explanations in this section assume familiarity with basic Windows operations. For details on the use
of your computer and the operating system, please refer to the respective manuals.
• Explanations in this section cover general Net MD products. For this reason, some explanations (and
some illustrations) may not be applicable to your Net MD. Please refer to the operating instructions of
your Net MD as well.
10
Checking the supplied accessories
AC power adaptor (1)
Battery charging stand (1)
Headphones/earphones
with a remote control (1)
Battery carrying
case (1)
NH-14WM Nickel metal
hydride rechargeable
battery (1)
Dedicated USB cable (1)
Dry battery case (1)
Optical cable (1)
Carrying pouch/carrying case with a belt clip (1)
∗ Do not play a CD-ROM on an audio CD player.
11
Looking at controls
The recorder
1
2
qs
qh
qd
qf
3
4
5
6
qg
7
8
qj
qk
ql
w;
9
q;
qa
A END SEARCH button
B T MARK button
C Battery compartment
D Display window
E GROUP button
L 5-way control key
F x • CHG button
G HOLD switch
Slide the switch in the direction of the
arrow to disable the buttons on the
recorder. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
Operation
Press N*
Function
play
Press .
rewind
Press >
fast forward
volume
H Terminals for attaching a battery
charging stand
Press VOL +*, –
I Terminals for attaching a dry battery
∗ The N and VOL + button has a tactile dot.
case
M OPEN switch
J DC IN 3V jack
K X button
12
N Jog dial (MENU/ENTER)
P Dedicated USB cable connecting jack
Q LINE IN (OPT) jack
R MIC (PLUG IN POWER) jack
There is a tactile dot beside the MIC
(PLUG IN POWER) jack.
Push to enter
S REC (record) switch
Turn to select
T i (headphones/earphones)/LINE
O Handstrap hole
OUT jack
Use the hole to attach your own strap.
The display window of the recorder
1
2
3
4
5
6
7
8
9
0
qa
A Play mode indication
F Bookmark indication
Shows the play mode (shuffle play,
program play, repeat play, etc.) of the
MD.
Lights up when playing a bookmarked
track.
G Level meter
B Group indication
H Battery indication
C Character information display
Displays the disc and track names,
date, error messages, track numbers,
etc.
Shows the approximate remaining
battery condition.
I LP2, LP4, MONO (monaural)
indication
D REC indication
J Melody timer indication
Lights up while recording. When
flashing, the recorder is in record
standby mode.
K Disc indication
Shows that the disc is rotating for
recording or playing.
E SYNC (synchro-recording) indication
13
The headphones/earphones with a remote control
A
B
F
G
C
D
H
I
J
E
A Volume control (VOL+, –)
F Clip
Turn to adjust the volume.
G HOLD switch
B x (stop) button
C Jog lever (NX/ENT, ., >)
Slide the switch in the direction of the
arrow (a yellow mark appears) to
disable the buttons on the remote
control. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
NX/ENT (to press): play, pause,
enter
.(to slide towards): REW
> (to slide towards): FF
H DISPLAY button
I P MODE/ button
J SOUND button
D Display window
E
(group) +, –
14
Using the clip for the remote control
It may be hard for you to read the indications in the display if the remote control is attached
upside down with the clip in its current position. In this case, attach the clip in the opposite
direction as shown below.
2 Attach the clip in the opposite direction.
1 Remove the clip.
2
1
The display window of the remote control
A
B
C
D
E
F
G
HI
A Disc indication
F Battery level indication
G Group indication
B Track number display
C Character information display
D Play mode indication
E SOUND indication
H Bookmark indication
I Melody timer indication
15
Getting started
Charge the rechargeable battery before using. Even if the rechargeable
battery is not charged, you can use the recorder as long as the AC
power adaptor is connected.
1
Insert the rechargeable battery.
Slide OPEN to open the
battery compartment lid.
Insert the NH-14WM
rechargeable battery minus
end first.
Close the lid.
e
E
2
Charge the rechargeable battery.
1 Connect the AC power adaptor to the
battery charging stand and the AC
adaptor to a wall outlet.
2 Place the recorder on the battery
charging stand.
To a wall
outlet
Battery charging
stand
Attach the
connector to the
jack firmly.
AC power
adaptor
To DC IN 3V
“Charging” flashes, e appears in the
display, and charging starts. When charging
is completed, the battery indication
disappears. Full charging of a completely
discharged rechargeable battery takes about
3.5 hours. The recorder can be used when
e disappears in the display. The battery
will be fully charged after charging is
continued 2 more hours.
16
3 Remove the recorder from the battery
charging stand.
For models supplied with the AC plug adaptor
If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.
Using the alkaline dry battery
Insert the battery minus end first.
Attach the dry battery case to the recorder.
Rear of the
recorder
2
1
Insert a LR6 (size AA) alkaline dry battery.
To operate the recorder for the longest possible time, use the dry battery together with a
fully charged rechargeable battery.
3
Make connections and unlock the
controls.
1 Connect the headphones/earphones
2 Slide HOLD to the opposite direction of
the arrow (.) on the recorder or the
remote control to unlock the controls.
with the remote control to i/LINE OUT.
HOLD
Connect firmly
HOLD
To i/LINE OUT
Connect firmly
continued
17
z
Battery life
You can also charge the rechargeable battery by
connecting the AC power adaptor directly to the
recorder.
The battery life is measured with the
power save mode on (see “Preserving
Connect the AC power adaptor to DC IN 3V on
the recorder, and then press x • CHG while the
recorder is stopped.
“Charging” and e appear in the display and
charging starts. Full charging takes about 3.5
hours. Charging is complete when e
disappears. Charging time may vary depending
on the battery condition.
When recording
(Unit: Approx. hours)
Batteries
SP
LP2
LP4
Stereo Stereo Stereo
Notes
NH-14WM
nickel metal
hydride
rechargeable
battery
11
16
20
• If you start playback or do another operation
during charging, the charging will stop.
• “Charging” and e may not appear in the
display immediately after you place the
recorder on the battery charging stand. The
indication will, however, begin flashing after a
few minutes and charging will begin.
LR6 (SG)
Sony alkaline
dry battery
11
29
16
38
21
50
• Charge the battery at a temperature of +5°C
(+41°F) to +40°C (+104° F).
NH-14WM
nickel metal
hydride
rechargeable
battery
+ LR6 (SG)
When playing
Batteries
SP
LP2
LP4
Stereo Stereo Stereo
NH-14WM
nickel metal
hydride
31
38
45
rechargeable
battery
LR6 (SG)
Sony alkaline
dry battery
47
80
57
95
69
NH-14WM
nickel metal
hydride
114
rechargeable
batter
+ LR6 (SG)
18
Recording an MD right away!
This section explains the basic procedure for making digital
recordings using an optical cable connected to a CD player, Digital
TV or other digital equipment. Make sure to use the optical cable. It is
recommended to use the recorder with the AC power adaptor when
1
Insert an MD.
1 Slide OPEN to open the lid.
2 Insert an MD to the direction of the
arrow with the label side facing front,
and press the lid down to close.
Make sure to
check the
record-protect
tab is closed.
19
2
Make connections. (Insert the cables
firmly and completely into the appropriate jacks.)
CD player, MD
player, DVD
video player, etc.
Portable
CD player,
etc.
To a digital (optical) out jack
AC power
adaptor
To a
wall
outlet
Optical
mini-plug
Optical plug
Optical cable*
To DC IN 3V
To LINE IN (OPT)
Note
It is recommended that you connect the AC power adaptor directly to the recorder while recording. If
you record using the battery charging stand, make sure that the fully charged rechargeable battery is
inserted in the recorder just in case the recorder becomes detached from the battery charging stand.
3
Record an MD.
1 Select and pause the sound source to
be recorded.
5-way control
key (N,
., >)
END
SEARCH
2 While the recorder is stopped, press
and slide REC.
Jog dial
“REC” and the REC LED light up and
recording starts.
3 Play the source you want to record.
Track marks are automatically added at
the same point as the sound source.
x
X
To stop recording, press x.
REC
20
Note
If you record on a previously recorded disc, the recorder is factory set to overwrite the entire contents of
the disc. If you want the recording to start after the existing contents, do the procedure “Recording
To
Press
current contents1)
Record over previous
material from a point
partway through1)
Press N, or press ., or > to find the start point of
recording, and then press x to stop. Then press and slide
REC.
Pause
Press X.2)
Press X again to resume recording.
Remove the MD
Press x and open the lid.3) (The lid does not open while
“TOC Edit” flashing in the display.)
1) If “REC-Posi” is set to “From End”, recording operations will always start from the end of the
2) A track mark is added at the point where you press X again to resume recording while pausing; thus
the remainder of the track will be counted as a new track.
3) If you open the lid while “REC-Posi” is set to “From Here”, recording will begin from the top of the
disc the next time you record. Check the point to start recording on the display.
If the recording does not start
• Make sure the recorder is not locked (pages
• Make sure the MD is not record-protected
according to the recording condition.
To know the recording
condition
The REC LED lights up or flashes
• Premastered MDs cannot be recorded over.
Recording
condition
REC LED
While recording
lights up
flashes according
to the loudness of
the source while
recording with a
microphone
(voice mirror)
Recording standby flashes
Less than 3
flashes slowly
minutes’ recording
time available
A track mark has
been added1)
goes off
momentarily
While checking-out flashes faster
1) Except when track marking was done
manually or automatically using Auto Time
21
Notes
• Do not change the rechargeable battery during
operation even if the recorder is connected to
the AC power adaptor. The operation may
stop.
• “TOC Edit” flashes while data of the
recording (the track’s start and end points,
etc.) is being recorded. Do not move or jog the
recorder or disconnect the power source while
the indication is flashing in the display.
• If the power supply is disrupted (i.e. the
battery is removed or becomes exhausted or
the AC power adaptor is disconnected) during
a recording or editing operation, or while
“TOC Edit” appears in the display, then it will
not be possible to open the lid until power is
restored.
• Note the following when recording from a
portable CD player:
—Some portable CD players may not be
capable of digital out when the AC power
adaptor is disconnected. If this is the case,
connect the AC power adaptor to the
portable CD player and use it on AC power
as the power source.
—On some portable CD players, optical
output may not be possible when using an
anti-skip function (e.g., ESP* or G-
PROTECTION). If this is the case, turn off
the anti-skip function.
∗ Electronic Shock Protection
z
• The recording level is adjusted automatically.
To adjust the level manually, see “Adjusting
• You can monitor the sound during recording.
Connect the headphones/earphones with
remote control to i/LINE OUT and adjust the
volume by turning the control on the remote
control (pressing VOL + or – on the recorder).
This does not affect the recording level.
22
Playing an MD right away!
1
Insert an MD.
1 Press OPEN to open the lid.
2 Insert an MD to the direction of the
arrow with the label side facing front,
and press the lid down to close.
2
Play an MD.
A short beep sounds in the headphones/
earphones when you operate.
5-way control key (N,
., >, VOL+, –)
2 Press VOL + or – to adjust the volume
on the recorder.
x
Jog dial
Turn the volume control towards VOL +
or – on the remote control.
The volume will be shown in the
display.
To stop play, press x.
X
A long beep sounds in the headphones/
earphones when you operate. After you stop the
recorder, the recorder will automatically turn
off in about 10 seconds (when using batteries)
or about 3 minutes (when using an AC power
adaptor).
Playback starts from the point you last stopped
playing.
To start with the first track of the disc, press N
on the recorder or the jog lever (NX) on the
remote control for 2 seconds or more.
Volume control
(VOL+, –)
x
Jog lever (NX,
., >)
1 Press N on the recorder.
Press the jog lever (NX) on the
remote control.
23
To
Operation on the
recorder
Operation on the remote
control
Pause
Press X. Press X again to
resume play.
Press NX.
Press NX again to resume
play.
Select a track directly Turn the jog dial, and then
viewing track number press to enter.
or name
—
Find the beginning of Press ..
Slide the jog lever towards
.. Slide the jog lever
towards . repeatedly until
you reach the beginning of the
desired track.
the current track
Press . repeatedly until
you reach the beginning of the
desired track.
Find the beginning of Press >.
the next track
Slide the jog lever towards
>.
Go backwards or
forward while playing
Press and hold . or >. Slide and hold the jog lever
towards . or >.
Search for a point in a While pausing, press and hold While pausing, slide and hold
track while viewing the . or >.
elapsed time (Time
search)
the jog lever towards . or
>.
Search for a specific
track while viewing
track numbers (Index
search)
While the recorder is stopped, While the recorder is stopped,
press and hold . or >. slide and hold the jog lever
towards . or >.
Cue to the beginning
of every 10th track
(only during playback
of the disc with no
group settings)1)
Press GROUP, and then press Press
. or >.
+ or –.
Remove the MD
Press x and open the lid.2)
Press x and open the lid.
2) Once you open the lid, the point to start play will change to the beginning of the first track (except when
the disc information is stored to the Personal Disc Memory).
If the play does not start
17).
Note
The playback sound may skip if:
• the recorder receives stronger continuous
shock.
• a dirty or scratched MiniDisc is played.
24
Various ways of recording
Each turn changes the display as
follows.
LapTime t RecRemain t GP
Remain t AllRemain t Title t
Sound t Clock
When you press the jog dial, the
selected information appears at A,
B and C.
Viewing various
information
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
A
(selected
B
C
Jog dial
item)
—
Track
Elapsed
time
(LapTime) number
RecRemain Track
number
Remaining
time for
recording
GP Remain Numbers of Remaining
tracks after time after
DISPLAY
the current the current
tracks in the location
group
within the
group
AllRemain Numbers of Remaining
tracks after time after
the current the current
track
location
Group name
—
On the recorder
Track name Disc name
1 Press the jog dial.
Sound
mode name of the
selected
sound mode
Indication
2 Turn the jog dial until “DISPLAY”
appears in the display, and then press
3 tThuernjotghedijaolg. dial until the information
you want appears in the display, and
then press the jog dial to enter the
selection.
Clock
Current date Current time
Note
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
Display window on the recorder
25
On the remote control
To start/stop recording
in sync with the sound
source
1 Press DISPLAY.
Each time you press the button, the
display changes as follows.
(Synchro-recording)
Display window on the remote control
During synchro-recording, the starting
and stopping of recording occurs are
synchronized with the sound source. This
simplifies digital recordings (e.g., from a
CD player) since the need to operate the
recorder or the sound source is
D
E
Display: D/E
eliminated. Synchro-recording is only
possible with the optical cable connected.
D
E
Track number Elapsed time
Track number Track name
Jog dial
Numbers of
tracks in the
group
Group name
Numbers of
tracks in the
disc
Disc name
REC
Track number Disc name
Track number Indication of the
selected sound mode
1 Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
—
Current time
Note
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
3 tThuernjotghedijaolg. dial until “REC SET”
appears in the display, and then press
z
4 tThuernjotghedijaolg. dial until “SYNC REC”
If you want to check the playing position or
track name while playing, see “Viewing various
appears in the display, and then press
5 tThuernjotghedijaolg. dial until “SYNC ON”
appears in the display, and then press
6 tPhreesjsoganddiasll.ide REC.
“REC” and the REC LED on the
recorder light up in the display and
the recorder stands by for recording.
26
7 Play the source you want to record.
Long-time recording
(MDLP)
The recorder starts recording
automatically when it receives the
playing sound.
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
(stereo) recording time. Monaural
recording at 2 times normal recording
time is also possible.
MDs recorded in MDLP mode can
be played back only on MD players
or recorders with MDLP playback
mode.
To stop recording
Press x.
z
When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
Jog dial
Notes
• The pause function cannot be turned on or off
manually during synchro-recording.
• Do not switch the “SYNC REC” setting while
recording. Recording may not be done
properly.
• Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
• If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
REC
1 While the recorder is stopped, press
2 tThuernjotghedidaila.l until “REC SET”
appears in the display, and then press
3 tThuernjotghedidaila.l until “REC MODE”
appears in the display, and then press
the jog dial.
continued
27
4 Turn the jog dial to select the desired
recording mode, and then press the
jog dial to enter the selection.
Recording from a TV or
radio (Analog
Recording)
Recording Display
Recording
time3)
mode1)
window
on the
This section explains how to record from
an analog equipment such as a cassette
recorder, radio, or TV.
recorder
SP stereo
SP
Approx. 80
min.
TV, cassette
recorder, etc.
LP2 stereo LP2
LP4 stereo LP4
Monaural2) MONO
Approx.160
min.
Approx.320
min.
To LINE OUT jacks, etc.
Approx.160
min.
R
L
1) For better sound quality, record in normal
stereo (stereo) or LP2 stereo mode.
(white)
(red)
2) If you record a stereo source in monaural, the
sounds from left and right will be mixed.
3) When using an 80-minute recordable MD
Line cable
RK-G129,
RK-G136, etc.
5 Press and slide REC to start
6 rPelcaoyrtdhiengs.ource you want to record.
REC
To stop recording
Press x.
The recorder keeps the setting of the
recording mode when you record the next
time.
To LINE IN
(OPT)
z
Audio components that support the LP2 stereo
or LP4 stereo modes are indicated by the
1 Make connections.
or
logo marks.
Use the appropriate connecting cord
to suit the source equipment. For
details, see “Optional accessories”
Notes
• It is recommended that you use the AC power
adaptor for long recordings.
• When you record in LP4 mode, momentary
noise may be produced on very rare occasions
with certain sound sources. This is because of
the special digital audio compression
technology that enables a recording time 4
times longer than normal. If noise is produced,
it is recommended that you record in normal
stereo or LP2 mode to obtain better sound
quality.
3 rPelcaoyrtdhiengs.ource you want to record.
28
4 Turn the jog dial until “SENS HIGH”
or “SENS LOW” appears in the
display, and then press the jog dial to
enter the selection.
Recording from a
microphone
Stereo
SENS HIGH: When recording a soft
microphone*
sound or a sound with a normal
volume.
SENS LOW: When recording a loud
sound or a sound at close range.
z
Jog dial
REC
When using a plug-in power-type microphone,
the microphone can be operated even when its
power switch is turned off since power is
supplied from the recorder itself.
Notes
• The recorder automatically switches input in
the following order; optical input, microphone
input, and analog input. You cannot record
through the microphone while an optical cable
is connected to the LINE IN (OPT) jack.
• The microphone may pick up the operating
sound of the recorder itself. Use the
microphone away from the recorder in such
cases. Please note that the sound of recorder
operations may be picked up if the
To MIC (PLUG IN
POWER)
1 Connect the stereo microphone to the
MIC (PLUG IN POWER) jack.
microphone that you use has a short
connector.
• Only the left-channel sound is recorded when
a monaural microphone is used.
The recorder changes to microphone
2 iPnrpeusst aauntdomsliadteicRalElyC. to start
recording.
To select microphone
sensitivity
1 While the recorder is recording or
2 sTtuorpnptehde, pjorgesdsitahleujnotgil d“iRaEl.C SET”
appears in the display, and then press
3 tThuernjotghedijaolg. dial until “MIC SENS”
appears in the display, and then press
the jog dial.
29
4 Turn the jog dial until “ON” appears
Adding track marks
while recording
You can add track marks (track number)
while recording to divide the material into
separate parts.
in the display, and then press the jog
5 dTiuarln. the jog dial until the desired
time interval appears in the display,
and then press the jog dial to enter the
selection.
T MARK
One rotation of the jog dial changes
the time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.
To cancel Auto Time Mark
Using Auto Time Mark to add
track marks while recording
Jog dial
When the elapsed recording time
exceeds the time interval for Auto
Time Mark:
Adding track marks manually
The recorder adds track marks at the point
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.
1 While the recorder is recording, press
T MARK (press P MODE/ on the
remote control).
Example: Eight minutes of recording
has been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
Adding track marks
automatically (Auto Time
Mark)
Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.
When the time interval set for Auto
Time Mark exceeds the elapsed
recording time:
The recorder adds track marks when the
set Auto Time Mark time interval has
elapsed.
1 While the recorder is recording or in
2 rTeucronrdthinegjopgaudsiea,l purnetsils“tRheEjCogSdEiTal”.
Example: Three minutes of recording
has been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.
appears in the display, and then press
3 tThuernjotghedijaolg. dial until “TIME
MARK” appears in the display, and
then press the jog dial.
“OFF” flashes in the display.
30
z
5 Turn the jog dial until “ManualREC”
“T” appears before the time display on the
recorder for track marks added by Auto Time
Mark, and “T” appears after the time display on
the remote control.
appears in the display, and then press
6 tPhleayjotghedisaolu. rce.
Notes
7 While observing the level meter in the
display, adjust the recording level by
turning the jog dial.
• If you add a track mark by pressing T MARK
or X, etc. while recording, Auto Time Mark
will begin automatically adding track mark
each time the selected time interval as elapsed.
• The setting will be lost when the recording
stopped.
Set the level so that the meter
segments light up between A and B.
If the meter segments lights up to the
right of B, reduce the input level.
Each level meter shows the following.
Upper — L channel input level
Lower — R channel input level
Adjusting the recording
level manually
The sound level is adjusted automatically
while recording. If necessary, you can set
the recording level manually during both
analog and digital recording.
REC
X
A
B
8 Press X again to start recording.
If your source is an externally
connected component, play the
source to the beginning of the
material to be recorded, and then start
recording.
Jog dial
To switch back to automatic
level control
1 While pressing X, press and slide
Select “Auto REC” in step 5.
REC.
Notes
The recorder stands by for recording.
• You cannot adjust the left and right channel
levels separately.
• Once you stop recording, the recorder will
revert to automatic recording level adjustment
mode the next time you start a recording
operation.
• To adjust the recording level manually during
procedure in this section with “SYNC REC”
is set to “SYNC OFF”. Afterwards, set
“SYNC REC” setting to “SYNC ON”, and
2 Press the jog dial.
3 Turn the jog dial until “REC SET”
appears in the display, and then press
4 tThuernjotghedidaila.l until “RecVolume”
appears in the display, and then press
the jog dial.
31
Various ways of playback
This section explains the operations that
A
B
are done on the remote control. For details
on operations done on the recorder, see
the pages indicated for each operation.
—
Recorded time
Track number SP/LP mode of the
current track
Note
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
Viewing various
information
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see “Viewing various information”
DISPLAY
For the recorder operation, see
Selecting the play
mode
1 While playing, press DISPLAY.
You can select the various play modes
Each time you press DISPLAY, the
display changes as follows.
using the P MODE/
button.
P MODE/
Display window on the remote control
A
B
Display: A/B
Jog lever (., >, ENT)
A
B
Track number Elapsed time
Track number Track name
1 Press P MODE/
repeatedly.
Each time you press the button, the
play mode changes as follows:
Numbers of
tracks in the
group
Group name
Play mode indication
Numbers of
tracks in the
disc
Disc name
Track number Disc name
Track number Indication of the
selected sound mode
32
Listening to selected tracks
only (Bookmark Play)
Indication1) Play mode
(none)
(normal Play)
All the tracks are
played once.
You can bookmark tracks on a disc and
play them only. The sequence of
bookmarked tracks cannot be changed.
1
A single track is played
once.
(single-track
play)
To bookmark the tracks
Bookmarked tracks
play back in order of
their track number.
1 While playing the track you want to
bookmark, press the jog lever for 2
seconds or more.
(Bookmark
play)
SHUF
All the tracks are
played in random order.
(shuffle play)
PGM
(program play)
Tracks are played in the
order that you
specified.
Flashing slowly
The first track of the bookmark play
1) Group play mode (
play a disc with group settings. For more
details, see “Playing a track in group play”
) appears whenever you
tracks.
For the recorder operation, see
Bookmarks can be set up to 20 tracks
in a disc.
To play the bookmarked tracks
Playing a track repeatedly
(Repeat Play)
1 While playing, press P MODE/
repeatedly until “ TrPLAY?”
You can use the repeat function for
normal play, single-track play, shuffle
play, and program play mode.
2 aPprepsesarthseinjotgheledviespr.lay.
The bookmarked tracks start playing,
starting with the smallest track
number.
1 While playing in the selected play
mode, press P MODE/ for 2
seconds or more.
appears in the display.
To erase bookmarks
While playing the track for which you
want to erase the bookmark, press the jog
lever for 2 seconds or more.
To cancel repeat play
Press P MODE/
for 2 seconds or more.
z
Note
By pressing the P MODE/
button during
If you open the lid, all bookmarks are canceled.
repeat play, you can change the play mode to
used with repeat play.
For the recorder operation, see
For the recorder operation, see
33
Listening to tracks in a
desired sequence (Program
Play)
Adjusting the sound
(Virtual-Surround • 6-
Band Equalizer)
You can vary the virtual sound to create
different acoustics, or modify the sound to
suit your taste and store it for later use.
The following two effect can be selected.
V-SUR (Virtual-Surround VPT
Acoustic Engine)
1 While playing, press
2 “SPliGdeMth”eajpopgelaervseirnrtehpeeadtiesdpllyayt.o select
a track, and then press to enter that
track.
P MODE/
repeatedly until
Provides 4 kinds of virtual surround
conditions.
6-BAND EQUALIZER
Provides 6 different sound qualities.
Programmed sequence
Track
number
Volume control
SOUND
4 YAoftuercapnropgrroagmramminugpthtoe2tr0actrkasc,kpsr.ess
the jog lever for 2 seconds or more.
The program is stored and playback
starts from the first track.
Jog lever
(., >, ENT)
z
The program play setting will remain in
memory even after playback finishes or is
stopped.
Varying the virtual sound to
create different acoustics
(Virtual-Surround)
Note
If you open the lid, all program settings are
canceled.
1 While playing, press SOUND
2 rPerpeessatSedOlUy NtoDsefloerct2“sVe-cSoUndRs”or more.
For the recorder operation, see
3 Slide the jog lever repeatedly to select
the surround mode.
A
B
Each time you slide the jog lever, A
and B change as follows:
A
B
STUDIO
V-SUR S
34
To modify and store the sound
A
B
You can modify the sound and store the
results in “CUSTOM1” and
“CUSTOM2”.
LIVE
CLUB
ARENA
V-SUR L
V-SUR C
V-SUR A
slide the jog lever until “CUSTOM1” or
“CUSTOM2” appears.
4 Press the jog lever to enter the
selected surround mode.
2 Press the jog lever.
3 Slide the jog lever repeatedly to select the
frequency.
Selecting the sound quality
(6-Band Equalizer)
1 While playing, press SOUND
2 rPerpeessatSedOlUy NtoDsefloerct2“sSeOcoUnNdsDo.”r more.
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz
3 Slide the jog lever repeatedly to select
4 Turn the volume control repeatedly to adjust
the level.
the sound mode.
Level (+6 dB)
You can select from among seven levels.
–6 dB, –3 dB, 0 dB, +3 dB, +6 dB
Each time you slide the jog lever, A
and B change as follows:
each frequency.
6 Press the jog lever to enter the selection.
A
B
HEAVY
POPS
SOUND H
SOUND P
SOUND J
SOUND U
SOUND 1
SOUND 2
To cancel the procedure
Press x for 2 seconds or more.
JAZZ
UNIQUE
CUSTOM1
CUSTOM2
To return to the preceding
setting
Press x.
4 Press the jog lever to enter the
Note
selected sound mode.
When you assign “SOUND” settings to
“CUSTOM1” or “CUSTOM2”, the maximum
volume setting will be limited to a certain level
(“VOL 24”) to prevent excessive loudness.
To cancel the procedure
Press x for 2 seconds or more.
For the recorder operation, see
To cancel the setting
Press SOUND repeatedly until the indication at
B disappears.
35
To return to the preceding
setting
Press x.
Changing playback
speed (Digital Pitch
Control)
The speed control function is useful for
language study and other purpose. This
function changes the playback speed
without changing the playback pitch.
The playback speed can be varied from
+100% to –50% the normal speed, in 13
steps.
z
Once you open the lid, the playback speed
reverts to the normal speed (0%).
Note
When using digital pitch control, you may hear
noise or an echo in the playback.
For the recorder operation, see
DISPLAY
Setting the alarm
(Melody Timer)
The alarm is convenient way to remind
yourself of important times, such as when
to get off the train. The alarm can be set to
go off in 1 to 99 minutes. The alarm will
also go off while the recorder is stopped.
Jog lever
(., >, ENT)
1 While playing, press DISPLAY for 2
2 sSelcidoendthseojromg olervee. r repeatedly until
DISPLAY
“USEFUL” appears in the display,
3 aSnliddethtehnepjoregslsetvheer jroegpelaevteedr.ly until
“DPC” appears in the display, and
then press the jog lever.
Jog lever
(., >, ENT)
The player changes to speed-setting
mode. Select the speed while
listening the sound.
1 Press DISPLAY for 2 seconds or
2 mSloidree.the jog lever repeatedly until
“USEFUL” appears in the display,
3 aSnliddethtehne pjoregslsetvheer jroegpeleavteedr.ly until
“M-TIMER” appears in the display,
and then press the jog lever.
4 Slide the jog lever repeatedly to select
the desired playback speed, and then
press the jog lever to enter the
selection.
“DPC” appears in the display.
To cancel the procedure
Press x for 2 seconds or more.
36
4 Slide the jog lever repeatedly until
“ON” appears in the display, and then
press the jog lever.
To cancel the alarm setting
Select “OFF” in step 4.
, appears.
To stop the alarm
Press any button.
z
previous alarm setting is automatically used.
• After sounding for one minute, the alarm will
automatically stop and the alarm setting will
be canceled. If the alarm sounds during stop
mode, then the power will automatically turn
off 10 seconds after the alarm stops. If the
alarm stops while an MD is playing, the
playback will continue uninterrupted.
5 Slide the jog lever repeatedly to select
the alarm sound, and then press the
jog lever.
You can select from three kinds of
sounds.
Display
TIMER 1
TIMER 2
TIMER 3
Alarm sound
Classical music 1
Classical music 2
Classical music 3
Notes
• The settings will be lost when you start
recording.
• The timer will begin counting down from the
recorder will begin counting down again from
the moment you change the elapsed time in
step 6.
6 Slide the jog lever repeatedly to select
the elapsed time.
For the recorder operation, see
Each time you slide the jog lever, the
elapsed time setting (TIME :)
changes by 1 minute, within a range
7 oPfre1sstoth9e9jomginleuvteesr.to enter the setting.
The time remaining until the alarm is
shown in the display while the
recorder is stopped.
To cancel the procedure
Press x for 2 seconds or more.
To return to the preceding
setting
Press x.
To check the time remaining
until the alarm
Stop playback. The remaining time will
appear in the display after a short while.
remaining time during play or play-pause.
37
4 Turn the jog dial until “LINE OUT”
appears in the display, and then press
the jog dial to enter the selection.
Connecting to a stereo
system (LINE OUT)
You can listen to the playback sound from
connected component. Connect the i/
LINE OUT jack of the recorder to the
LINE IN jacks of an amplifier or a tape
player with a line cable.
Notes
• If the “AUDIO OUT” parameter for the i/
LINE OUT jack is set to “LINE OUT”, VOL
+ or –, Virtual Surround, or 6-Band Equalizer
will not function.
• The “AUDIO OUT” parameter for the i/
LINE OUT jack cannot be set to “LINE OUT”
when the remote control is connected.
• When you connect the headphones/earphones
directly to the recorder, set the “AUDIO
OUT” parameter for the i/LINE OUT jack to
Stereosystem,
etc.
To LINE IN
Stereo mini-plug
2 phono plugs
L
R
(white)
(red)
Line cable
To i/LINE OUT
Jog dial
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “AUDIO OUT” parameter for the
i/LINE OUT jack.
1 Press the jog dial.
2 Turn the jog dial until “USEFUL”
appears in the display, and then press
3 tThuernjotghedidaila.l until “AUDIO OUT”
appears in the display, and then press
the jog dial.
38
Editing recorded tracks
This section explains the operations that
are done on the recorder. For details on
operations done on the remote control, see
the pages indicated for each operation.
Maximum number of
characters that can be input
per disc
Alphanumeric characters and symbols
only: Approx. 120 titles of about 10
characters each (a maximum of about
1,700 characters)
The number of titles that can be stored on
a disc depends on the number of
characters that are input for track names,
group names, and disc name.
Before editing
You can edit your recordings by adding/
erasing track marks or labeling tracks and
MDs.
About the character palette
Notes
• Premastered MDs cannot be edited.
• Close the record-protect tab on the side of the
MD before editing
• When “TOC Edit” is flashing, the editing
results are being recorded.
—Do not move or jog the recorder.
—Do not disconnect the power source.
—The lid becomes locked.
During operations on the recorder,
characters can be selected from the
character palette in the display.
The character palette has the following
configulation.
Labeling a track or a
disc (Name)
Letter input area
The cursor flashes.
You can name tracks and discs using the
recorder’s character palette.
Note
Character palette
Available characters
Since only a part of the character palette
is visible on the display, use the control
bar to move the cursor and enter
characters.
• Capital and small letters of the English
alphabet
• Numbers 0 to 9
• ! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)
Note
If you enter the symbol “//” between the
characters in disc names such as “abc//def”, you
may be unable to use the group function.
Maximum number of
characters per name
Track names, group names, and disc
name: Approx. 200 each (containing a
mixture of all available characters)
39
5 Press VOL –.
X
5-way control key
(., >, N,
VOL+, –)
The cursor shifts from the letter input
area to the character palette.
END SEARCH
The cursor and character alternate.
x
6 Select a letter using the control key
Jog dial
and press N to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
Labeling
You can label a track or disc while the
recorder is stopped, recording or playing.
Note that if you label a track while the
recorder is stopped, the track must be the
currently selected.
The cursor flashes at the next
input position.
1 Press the jog dial.
2 Turn the jog dial until “EDIT”
The buttons used for character input
and their functions are listed below.
appears in the display, and then press
3 tThuernjotghedijaolg. dial until “Name”
Functions1)
Operations
appears in the display, and then press
To move the cursor Control key
4 tThuernjotghedijaolg. dial until the following
item appears in the display, and then
press the jog dial.
in the character
palette.
up
left
right
When labeling a
track
“
: Name”
down
When labeling a
disc
“
: Name”
Turn the jog dial
(move the cursor
upward or
The cursor flashes in the letter input
area and the track, group, or disc is
ready to be labeled.
downward).
To select a
Turn the jog dial.
character in the
letter input area.
The cursor flashes.
To enter a letter.
Press N
Press the jog dial.
40
Functions1)
Operations
Re-labeling
To move the cursor Press VOL –.
from the letter
input area to the
You can change the label of the disc or a
track by doing the procedure for
character palette.
To move the cursor Press x.
from the character
palette to the letter
input area.
To re-label a track:
Start playing the track you want to re-
label, and then change the track name
while the recorder is playing, or change
the track name while the recorder is
stopped and the track to be re-labeled is
currently selected.
To enter a name.
Press the jog dial or
N for 2 seconds
or more.
To re-label a disc:
You can re-label the disc while the
recorder is stopped, recording, or playing.
To insert a blank
space before the
cursor.
Press END
SEARCH and VOL
+ at the same time.
To delete a letter.
Press END
SEARCH and VOL
– at the same time.
To cancel labeling
Press x for 2 seconds or more.
To display “:”, “–” Press X.
or “/” at the input
position in the
To return the preceding
settings
Press x.
letter input area.
To switch capital
and small letters.
Press X.
Notes
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
To cancel labeling. Press x in the
letter input area.
1) Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
For the remote control operation, see
8 cPhreasrsacttheersjoogf dthiaellfaobre2l nsaemcoen.ds or
more.
A track or disc is labeled.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input at that point is entered
automatically.
41
4 Turn the jog dial until “
: Move”
Moving recorded tracks
(Move)
You can change the order of the recorded
tracks.
appears in the display, and then press
the jog dial.
The selected track number flashes in
the middle row of the display.
If the track has been labeled, press
> to make the track name appear
in the display. Press . to display
the track number again.
Note
To move tracks in a disc with group settings,
see page 51.
Example
Move track C (track number 3) from the
third to the second track.
A
B
C
D
Before moving
5 Turn the jog dial until the destination
track number flashes in the display.
For the example, since track C will be
moved to track “002”, turn the jog
dial until “002” flashes in the display.
A
C
B
D
After moving
5-way control
key (., >)
Jog dial
6 Press the jog dial to enter the
selection.
The track moves to the selected
destination track.
To cancel moving
Press x for 2 seconds or more.
1 While playing the track you want to
2 Tmuorvnet,hperejossgtdhiealjougntdilia“lE. DIT”
appears in the display, and then press
the jog dial.
To return the preceding
settings
Press x.
The recorder plays the selected track
For the remote control operation, see
3 rTeuprenatthedeljyo.g dial until “Move”
appears in the display, and then press
the jog dial.
42
Adjusting the dividing point
before dividing a track (Divide
Rehearsal)
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. You can also
make fine adjustments to the track mark
position before making the actual
division. The track numbers will increase
as follows.
1 While playing, press T MARK for 2
seconds or more.
Four seconds of the track from the
point T MARK is pressed is played
back repeatedly.
This function can be set with the recorder
only.
The point T MARK is pressed.
Note
You cannot add a track mark on a track that has
been checked-out from your computer.
Four seconds of the track plays
back repeatedly.
1
2
3
4
Track marking
2 Turn the jog dial to adjust the point to
divide.
1
2
3
4
5
Turning the jog dial moves the
dividing point forward or backwards.
The dividing point can be moved up
to a maximum of 8 seconds forward
or backwards from the point
Track numbers increase.
T MARK
T MARK was pressed in step 1.
The point
The dividing point shifts
T MARK is
a maximum of 8 seconds
pressed in
forward or backwards.
step 1.
Jog dial
Dividing a track directly
The moved four-second interval plays
back repeatedly.
1 While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
3 Press the jog dial to enter the dividing
“MARK ON” appears in the display,
and a track mark is added. The track
number will increase by one.
point.
43
To add track marks while
recording (except while
synchro-recording)
1 While playing the track with the track
mark you want to erase, press X to
2 pFainudset.he track mark by pressing .
Press T MARK on the recorder
(P MODE/ on the remote control) at
the point you want to add a track mark.
You can use Auto Time Mark to add track
marks automatically at specified intervals
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
“MARK” appears in the display for a
3 fPerwessseTcoMndAsR. K to erase the mark.
Combining tracks
(Combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also erased.
Note
The track numbers will change as follows.
This function can be set with the recorder
only.
When you erase a track mark between the two
consecutive tracks that are assigned into
different groups, the second track is re-assigned
into the group containing the first track. In
addition, if you combine a track that is assigned
to a group with a track that is not assigned to a
group (two consecutive tracks), the second
track takes the same registration setting as the
first track.
Notes
• You cannot erase a track mark on a track that
has been checked-out from your computer.
• To combine groups or tracks in a disc with
group settings, see page 49.
• You cannot combine tracks recorded in
different recording mode.
1
2
3
4
Erasing tracks and the
entire disc (Erase)
Erase a track mark
You can erase unnecessary tracks or all
tracks on a disc.
1
2
3
Track numbers decrease
Note
• You cannot erase tracks that have been
checked out from your computer. You cannot
erase an entire disc if it contains a checked-out
track. In this case, check in the track or tracks
to the computer.
T MARK
5-way control key
(.)
X
44
To erase the whole disc
Jog dial
You can quickly erase all the tracks and
data of the MD at the same time.
x
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the disc before you erase it.
1 Play the disc you want to erase to
2 cPhreescskxthetocostnotpe.nts.
To erase a track
3 Press the jog dial.
Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
4 Turn the jog dial until “EDIT”
appears in the display, and then press
1 While playing the track you want to
5 tThuernjotghedijaolg. dial until “Erase”
appears in the display, and then press
2 eTruarsne,thperejsosgthdeiajlougndtiila“l.EDIT”
appears in the display, and then press
6 tThuernjotghedijaolg. dial until “
: Erase”
3 tThuernjotghedijaolg. dial until “Erase”
appears in the display, and then press
the jog dial.
“AllErase?” and “PushENTER”
appears in the display, and then press
7 aPprepsesarthienjtohge ddiiaslpltaoye.rase the whole
4 tThuernjotghedijaolg. dial until “
: Erase”
disc.
appears in the display, and then press
the jog dial.
“TOC Edit” appears in the display,
and all the tracks will be erased.
When erasing is complete,
“BLANKDISC” flashes and “00:00”
appears in the display.
“Erase OK?” and “PushENTER”
5 aPprepsesarthienjtohge ddiiaslpltaoye.rase the track.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To cancel erasing
Press x for 2 seconds or more.
To return the preceding
settings
Press x.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
For the remote control operation, see
45
Using the group function
Note
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input.
What is the group
function?
The group function is provided to allow
playback of discs with group settings. The
group function is convenient for playback
of MDs on which several albums or CD
singles have been recorded in MDLP
(LP2/LP4) mode.
Using the group
function when
recording
END
5-way control
What is a disc with group
settings?
SEARCH
key (., >)
The recorder can operate various
functions in units of group; that is tracks
that have been recorded on a disc as part
of separate groups, as shown below.
Before group settings are made
Disc
GROUP
REC
Recording tracks to a new
group
1 2 3 4 5 6 7 8 12 13 1415
During recording, you can add a new
group at the end of the currently recorded
tracks on a disc.
Track 1 to 5 are assigned to group 1.
Track 8 to12 are assigned to group 2.
Track 13 to15 are assigned to group 3.
m
Track 6 to 7 are assigned to no group.
1 While the recorder is stopped, press
2 EWNhDileSpErAesRsiCnHg .GROUP, press and
3 sPlliadye tRheECso.urce sound.
After group assignments have been made
Disc
Group 1
Group 2 Group 3
A new group will be added after the
current contents on a disc.
1 2345 6 7 1 2345 1 23
To stop recording
Press x.
Tracks that were not assigned to a group
are treated as being part of “ Group - -” .
The material that was recorded up until x
was pressed is entered as a new group.
You can create a maximum of 99 groups
on a disc.
46
Recording a track to an
existing group
Using the group
function when playing
You can add a track to an existing group.
The recorder can operate various
playback with a disc which has group
setting.
This section explains the operations that
are done on the remote control. For details
on operations done on the recorder, see
1 Press GROUP and press . or >
until the group you want to add a
track to appears in the display.
2 While pressing GROUP, press and
3 sPlliadyetRhEe Cso.urce sound.
P MODE/
z
• To add a track that is currently playing to a
group, stop or pause playing the track first,
and then do the procedure from step 2.
• You can set the recorder to always create a
new group without pressing the GROUP
Jog lever
(., >, ENT)
+, –
Playing a track in group play
In group play, all groups are played in
order, starting with group 1, followed by
the unassigned tracks (“Group --”).
Playback stops after all the tracks have
been played.
1 While playing, press P MODE/
until “
” appears in the display.
To cue to the start of a group
(Group Skip)
1 While playing, press
+ or
–.
Pressing the – button cues to the first
track in the current group. Pressing the button
again cues to the first track of the previous
group.
47
Selecting the play mode for
group play (Group Play Mode)
Playing groups in a desired
sequence (Group Program
Play)
The shuffle play and program play
function can be used during group play
mode.
Do the procedure explained in “Listening
Play)” (page 34) to playback groups in a
desired sequence. You can program up to
10 groups. The sequence of tracks within
the groups cannot be changed.
1 Press P MODE/ repeatedly.
After normal playback, the following
play modes are displayed.
Display
Play mode
All tracks in the groups
play back once (starting
with the first track in
group 1).
(Normal
Group Play)
, SHUF Shuffle play starts with the
group that is currently
playing, and continues
with the succeeding
groups.
(In-Group
Shuffle)
, PGM
(Group
Program)
The groups are played in
the order that you
specified.
Repeat play for the selected
group play mode
(Group Repeat Play)
1 While playing in the selected group
play mode, press P MODE/ for 2
seconds or more.
Playback repeats in the respective
group mode.
Display
Play mode
Repeat play of tracks
within a group.
SHUF
PGM
Repeat shuffle play of
tracks within a group.
Repeat play for group
program.
48
Notes
• It is not possible to make a group setting if the
tracks, groups and disc name on a disc contain
more than the maximum number of characters
that can be stored.
• The tracks or groups must be sequential. If the
desired tracks or groups are not consecutive,
you must move them to make them
Editing groups
This section explains the operations that
are done on the recorder. For details on
operations done on the remote control, see
the pages indicated for each operation.
consecutive before you can assign them
Assigning tracks or groups as
a new group (Group Setting)
Jog dial
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 99 groups
on a disc.
Disc
1 Press the jog dial.
Track number
Group 2
Group 1
2 Turn the dial until “EDIT” appears in
the display, and then press the jog
1 2 3 4 5 6 7 8 9 101112
3 dTiuarln. the jog dial until “
: Set”
appears in the display, and then press
the jog dial.
Assigning tracks 1 to 3 to a
new group
Assigning group 1 and group 2
to a new group
The track number of the first track
(“STR”) appears in the display.
Disc
Group 2
Group 1
1 2 3 4 5 6 7 8 9 101112
4 Turn the jog dial until the number of
the desired first track appears in the
display, and then press the jog dial.
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
This selects the first track of the new
group.
Track numbers appear according to their
order on the disc, not their order within
the group.
continued
49
5 Turn the jog dial until the number of
the desired last track appears in the
display, and then press the jog dial to
enter the selection.
4 Turn the dial until “EDIT” appears in
the display, and then press the jog
5 dTiuarln. the jog dial until “
: Release”
appears in the display, and press the
jog dial.
This selects the last track of the new
“Release?” and “PushENTER”
6 aPprepsesarthien jtohge ddiiaslpltaoyr.elease a group.
To cancel the procedure
Press x for 2 seconds or more.
The group setting of the selected
group is released.
To return the preceding
setting
Press x.
To cancel the operation
Press x for 2 seconds or more.
Notes
To return the setting one level
before
Press x.
track of an existing group or a track that does
not belong to a group.
sure the track comes after the one selected in
track of an existing group or a track that does
not belong to a group.
For the remote control operation, see
Labeling recorded groups
For the remote control operation, see
You can label a group while the recorder
is recording or playing a track in the
group. You can also label a group while a
track in the group is selected and the
recorder is stopped.
Releasing a group setting
Jog dial
x
(page 40) and select “
: Name” in
For the remote control operation, see
1 Select a group you want to release
and check the contents (see “Playing
3 Press the jog dial.
50
3 Turn the jog dial until “Move”
Moving a track in a disc with
group setting
appears in the display, and then press
4 tThuernjotghedijaolg. dial until “
: Move”
You can move a track from one group out
of the group or to another group. You can
also move a track that does not belong to a
group to an existing group.
appears in the display, and then press
5 tWhehejongmdoiavli.ng a track out of a group,
Disc
skip this step.
When moving a track to a different
group, turn the jog dial until the
destination group appears in the
display, and then press the jog dial.
Group 2 Group 3
Group 1
1 2 3 4 5 6 1 2 3 4 1 2 3
If the group has been labeled, press
> to display the group name. Press
. to return to the group number
display.
Moving track number 2 in
group 1 to track number 3 in
group 2
Disc
Group 1
Group 2
Group 3
6 Turn the jog dial until the destination
track number (the track number
within a group if the destination is a
different group) appears in the
display, and then press the jog dial to
enter your selection.
1 2 3 4 5 1 2 3 4 5 1 2 3
5-way control key
(., >)
The selected track number appears in
the middle row of the display.
Jog dial
If the track has been labeled, press
> to make the track name appear
in the display. Press . to return to
the track number display.
To cancel moving
Press x for 2 seconds or more.
1 While playing the track you want to
2 Tmuorvnet,hperejossgtdhiealjougntdilia“lE. DIT”
appears in the display, and then press
the jog dial.
To return the preceding
setting
Press x.
For the remote control operation, see
The recorder plays the selected track
repeatedly.
51
5 Turn the jog dial to select the
destination point on the disc, and then
press the jog dial to enter the
selection.
Changing the order of a group
on a disc (Group Move)
5-way control key
(., >)
To cancel moving
Press x for 2 seconds or more.
Jog dial
To return the preceding
setting
Press x.
For the remote control operation, see
1 While playing a track within a group
whose order you want to change,
To erase a group
2 pTruersnstthheedjoiagl duinatli.l “EDIT” appears in
You can erase tracks in a selected group.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the group before you erase it.
the display, and then press the jog
3 dTiuarln. the jog dial until “Move”
appears in the display, and then press
Note
4 tThuernjotghedijaolg. dial until “
: Move”
You cannot erase tracks that have been checked
out from your computer. You cannot erase a
group if it contains a checked-out track. In this
case, check in the track or tracks to the
computer.
appears in the display, and then press
the jog dial.
The group number to which the
currently playing track belongs
appears in the middle section of the
display. If the group has been labeled,
press > to display the group name.
Press . to return to the group
number display.
Jog dial
x
Example: Moving the first group in the
disc (Group01) to the position between
the second (Group02) and the third
(Group03) group.
1 Select a group you want to erase and
3 Press the jog dial.
52
4 Turn the jog dial until “EDIT”
appears in the display, and then press
5 tThuernjotghedijaolg. dial until “Erase”
appears in the display, and then press
6 tThuernjotghedijaolg. dial until “ : Erase”
appears in the display, and then press
the jog dial.
The group name and “GP Erase?”
appear, and “PushENTER” flashes in
7 tPhreesdsistphelajyo.g dial to erase the group.
The group is erased.
To cancel erasing
Press x for 2 seconds or more.
To return the preceding
setting
Press x.
For the remote control operation, see
53
Other operations
Useful settings
The recorder has many menus with useful functions for recording, playback, editing, etc.
The following table shows the menu items that you can select. Some items can be set with
both the recorder and the remote control, and some can be set with either the recorder or the
remote control.
Category
Function
What it does
Operation Site
page
Preparation Clock setting
Sets the date and time.
recorder
General
operations
Beep on/off
Jog dial
Turns the beep sound on or off. recorder
remote
control
Turning the jog dial changes the recorder
operational direction on the
display.
Power saving Maximizes the battery life.
recorder
remote
control
Recording Synchro-
Simplifies operations during
digital recording.
recorder
Recording
Long-time
recording
Selects the recording mode (SP, recorder
LP2, LP4, or monaural).
Selecting the
microphone
sensitivity
Sets the microphone sensitivity recorder
to suit the source sound.
Adding track
marks (Divide) at specified intervals.
Adds track marks automatically recorder
Adjusting the Manually adjusts the recording recorder
recording level level.
Selecting the
Allows you to specify whether recorder
record-starting material is overwritten or not
point
when recording.
Group
recording
Sets the recorder to create a new recorder
group with each recording
operation.
54
Category
Playing
Function
What it does
Operation Site
page
Selecting the
play mode
Selects the play mode, such as
repeat play, program play, etc.
recorder
remote
control
Changing the Customizes the surround or
sound quality equalizer mode settings.
recorder
remote
control
Changing the Varies the playback speed
recorder
playback
speed
without changing the pitch.
Listening to
Outputs sound from the i/
recorder
playback from LINE OUT jack when listening
connected
component
to a connected component.
Starting
playback
quickly
Sets the recorder to start
playback or cue to a track
quickly.
recorder
remote
control
Limiting the
maximum
volume
Sets a limit on the maximum
volume to protect your hearing.
recorder
remote
control
Display
Viewing
information
Displays various information
such as the remaining time, etc.
in the display window.
recorder
pages 25
and 64
remote
control
pages 25
and 32
Selecting the
backlight
status
Selects the status of the
backlight in the display window control
on the remote control.
remote
Adjusting the Adjusts the contrast of the
contrast display window on the recorder.
recorder
55
Category
Editing
Function
What it does
Operation Site
page
Labeling
(Name)
Labels tracks, groups, or the
disc.
recorder
(track
and disc)
(group)
remote
control
(track
and disc)
(group)
Moving
Erasing
Changes the order of tracks or
groups.
recorder
(track)
(group)
remote
control
Erases tracks, groups, or the
entire disc contents.
recorder
(track
and disc)
(group)
remote
control
Assigning
tracks to
groups
Assigns recorded tracks or
groups to a new group.
recorder
remote
control
Releasing a
group
Releases group settings.
recorder
remote
control
Useful
functions
Melody Timer Sets the alarm to go off after a
desired time interval.
recorder
remote
control
Personal Disc Stores the recorder settings.
Memory
recorder
remote
control
56
How to use the menu items
To set the menu items, do the following procedure.
On the recorder:
Jog dial
1 Press the jog dial to enter the menu.
2 Turn the jog dial to select the item.
3 Press the jog dial to enter the selection.
The setting will be entered when you press the
jog dial at the last.
Turn to select
Press to enter
DISPLAY
On the remote control:
1 Press DISPLAY for 2 seconds or more to enter the
menu.
2 Slide the jog lever to select the item.
3 Press the jog lever to enter the selection.
The setting will be entered when you press the jog
lever at the last.
Jog lever
(., >, ENT)
To return the preceding setting
Press x.
To cancel the operation while setting
Press x for 2 seconds or more.
57
• On the remote control
While the recorder is stopped or
recording, press DISPLAY repeatedly.
Setting the clock to stamp the
recorded time
To stamp the date and time on the MD
when you record, you first need to set the
clock. Once you set the clock, the
recorder will include a time stamp each
time you record something. The recording
date is not recorded for tracks that are
checked out from your computer.
This function can be set with the recorder
only.
To display the time in the 24-
hour system
While setting the clock, press T MARK.
To display the time in the 12-hour system,
press T MARK again.
To maintain the correct time
Once you set the clock, it will keep correct time
as long as the recorder is connected to a power
source, such as the charged rechargeable
rechargeable battery, alkaline dry battery, or AC
power adaptor. However, if no power source is
connected, the clock setting will change back to
the factory setting after about 3 minutes.
When changing the alkaline dry battery, make
sure to do it within 3 minutes.
1 When the recorder is stopped, enter
the menu and select “OPTION” -
“CLOCK SET”.
The digits of the year flash.
Notes
• Make sure the time is correctly set if you want
the time stamp to be accurately recorded for
an important recording.
• Under normal conditions, the clock may vary
by about plus or minus 3 minutes per month.
2 Change the current year by turning
the jog dial, and then press the jog
dial.
Turning off the beep sound
3 TRhepeedaitgsitteopf 2thteomenotnetrhthfleaschuersre. nt
You can turn off/on the beep sound on the
recorder and the remote control.
month, date, hour, and minute.
When you press the jog dial to enter
the minute, the clock starts operating.
1 Enter the menu and select “OPTION”
2 -Se“lBeEctE“PB”E. EP OFF”.
If you make a mistake while
setting the clock
Press . to go back to the wrongly
entered item, and then enter the correct
value. You can skip a step by pressing
>.
To turn on the beep sound
Select “BEEP ON”.
To display the current time
• On the recorder
While the recorder is stopped or
recording, enter the menu, and select
“DISPLAY” - “Clock”.
58
Changing the operational
direction of the display
Recording without
overwriting existing material
When you turn the jog dial downward, the
display scrolls downward. This is the
factory setting. You can change the
factory setting to scroll in the opposite
direction.
If you wish to avoid recording over the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
This function can be set with the recorder
only.
This function can be set with the recorder
only.
1 Enter the menu and select “OPTION”
1 Enter the menu and select “OPTION”
2 S- e“lJeOcGt “DRIEAVLE”R. SE”.
2 S- e“lReEctC“-FProosmi”.End”.
To turn the setting to normal
Select “DEFAULT”.
To start recording over the
current contents
Select “From Here”.
Preserving battery power
(Power Save Mode)
z
• To temporarily record without recording over
the current contents, press END SEARCH
before the start of recording. The recording
will begin after the last track, even if “REC-
Posi” is set to “From Here” (factory setting).
The remaining recordable time on the disc
will appear in the display when you press
END SEARCH.
This function allows you to maximize the
operating life of the battery when playing
the recorder with headphones/earphones
(with a remote control) or a line cable
connected to the i/LINE OUT jack.
Power consumption is reduced by turning
off the display when no operation has
been made for a while.
• If the group recording setting (“
set to “ : REC ON”, the recorder will not
overwrite existing materials.
: REC”) is
1 Enter the menu and select “OPTION”
2 S- e“lPeocwt “ePrMowoedreS”a.ve”.
To turn the setting to normal
Select “NORMAL”.
59
Indication
Play mode
Creating a new group when
recording
A/B1)
/
TrPLAY Bookmarked tracks
play back in order of
By sliding REC to the right, you can set
the recorder to create a new group
automatically each time you record. This
is convenient when recording several CDs
in succession.
their track number.
SHUF/Shuffle
All tracks are played
in random order
PGM/Program Tracks are played in
the order that you
This function can be set with the recorder
only.
specified.
1 While the recorder is stopped, enter
the menu and select “REC SET” -
: REC”.
1) Group play mode appears whenever you play
a disc with group settings. For more details,
(Group Play Mode)/Repeat play for the
2 “Select “ : REC ON”.
To turn the setting to normal
Select “ : REC OFF”.
3 Select “RepeatON” (playing a track
repeatedly) or “RepeatOFF”.
When you select “RepeatON”,
appears on B and the playback
repeats with the play mode selected in
Selecting the play mode
1 Enter the menu and select “PLAY
For the details and the remote control
operation, see page 32.
2 MSeOleDctEt”h.e desired play mode.
Listening to selected tracks
only (Bookmark Play)
When you select A, B appears.
To bookmark the tracks
1 While playing the track you want to
bookmark, press N for 2 seconds or
more.
The first track of the bookmark play
is set.
Indication
Play mode
tracks.
A/B1)
To play the bookmarked tracks
— /Normal
1/1 Track
All the tracks are
played once.
A single track is
played once.
60
To erase bookmarks
For details and the remote control
operation, see page 47.
While playing the track for which you
want to erase the bookmark, press the jog
lever for 2 seconds or more.
Selecting the play mode for
group play (Group Play Mode)/
Repeat play for the selected
group play mode (Group
Repeat Play)
For the details and the remote control
operation, see page 33.
Listening to tracks in a
desired sequence (Program
Play)
The following group play mode
appear after normal play modes.
Display
Play mode
:Normal All tracks in the groups
3 Turn the jog dial to select a track, and
play back once (starting
with the first track in
group 1).
(Normal
Group Play)
then press the jog dial.
The selected track enters.
Track
number
: Shuffle Shuffle play starts with
Program number
the group that is currently
playing, and continues
with the succeeding
groups.
(In-Group
Shuffle)
:Program The groups are played in
the order that you
specified.
(Group
Program)
2 Select “RepeatON” or “RepeatOFF”.
Playing group in a desired
sequence (Group Program
Play)
Do the procedure explained in “Listening
Play)” (page 61) to playback groups in a
desired sequence. You can program up to
10 groups. The sequence of tracks within
the groups cannot be changed.
5 Press the jog dial for 2 seconds or
more.
The program is set and the playback
starts from the first track.
For the details and the remote control
operation, see page 34.
Playing a track in group play
For details and the remote control
operation, see page 48.
play mode” (page 60) and select
“
To cue to the start of a group (Group
Skip)
1 While playing, press GROUP.
2 Press . or >.
61
2 Turn the jog dial repeatedly to select
the sound mode and then press the jog
dial to enter the selection.
Adjusting the sound (Virtual-
Surround • 6-Band Equalizer)
Varying the virtual sound to
create different acoustics
(Virtual-Surround)
HEAVY
1 Enter the menu and select “SOUND”
2 T- u“Vrn-SthUeRjo”.g dial repeatedly to select
the surround mode, and then press the
jog dial to enter the selecteion.
Level of the each frequency
(100Hz - 10 kHz)
Each time you turn the jog dial, A
changes. When you press the jog dial,
B appears.
Indication which represents each
sound mode appears.
A
B
SH
SP
SJ
HEAVY
POPS
JAZZ
UNIQUE
CUSTOM1
CUSTOM2
SU
S1
S2
Each time you turn the dial, A
changes. When you press the jog dial,
B appears.
To modify and store the sound
1 While the recorder is playing, enter the menu
and select “SOUND” - “SOUND EQ” -
“CUSTOM1” or “CUSTOM2”.
A
A
STUDIO
LIVE
VS
VL
VC
VA
2 Press . or > to select the frequency.
CLUB
ARENA
Selecting the sound quality (6-
Band Equalizer)
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, 10 kHz
1 While playing, enter the menu and
select “SOUND” - “SOUND EQ”.
62
3 Press VOL + or – to adjust the level.
Starting the playback quickly
(Quick Mode)
After pressing the playback button or
cueing to the track, the playback can start
quickly.
1 While the recorder is stopped or
Level (+6 dB)
You can select from among seven levels.
–6 dB, –3 dB, 0 dB, +3 dB, +6 dB
playing, enter the menu and select
2 “SOelPeTctIO“QNU”I-C“KP”o.werMode”.
4 After selecting the level, press the jog dial to
enter.
Display window on the recorder
To cancel the setting
Select “SOUND OFF”.
For details and the remote control
operation, see page 34.
Changing playback speed
(Digital Pitch Control)
Display window on the remote control
1 While the recorder is playing, enter
the menu and select “USEFUL” -
2 “TDurPnCt”h.e jog dial to select the desired
playback speed, and then press to
enter.
To switch back to the normal
setting
Select “NORMAL”.
Notes
• When the power mode is set to “QUICK”, the
power remains on within the recorder even
when nothing appears in the display. This
leads to a shorter battery life. For this reason,
it is recommended that you charge the battery
daily.
Example: while selecting the playback
speed of +50% the normal.
• If no recorder operation (including opening or
closing of the lid) occurs for 17 hours, the
power in the recorder automatically turns off.
For this reason, the next time you start
playback or do another operation, the recorder
will not respond quickly. The unit, however,
will return to quick mode afterwards.
For details and the remote control
operation, see page 36.
63
A
(selected
item)
B
C
Protecting your hearing
(AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the
maximum volume to protect your ears.
AllRemain Number of Remaining
tracks after time after the
the current current
track
location in the
disc
1 Enter the menu and select “OPTION”
2 -Se“lAeVctL“SA”V. LS ON”.
Track
name
(Title)
Disc name Group name
When you try to turn the volume too
high, “AVLS” appears in the display.
The volume is kept to a moderate
level.
Sound
mode
name
Indication
of the
—
selected
sound
(Sound)
mode
To cancel the AVLS
Select “AVLS OFF”.
RecDate
Recorded Recorded time
date
Note
Viewing various information
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear different.
1 While playing, enter the menu and
2 sSeelleecctt“tDheISinPfLoArmYa”t.ion you want.
For details and the remote control
operation, see page 32.
Indication: A(selected item)/B/C
A
(selected
item)
B
C
—
Track
Elapsed time
(LapTime) number
1 Remain Track
number
Remaining
time of the
current track
GP
Remain
Group
name
Remaining
time after the
current
location in the
group
64
Turning on/off the backlight
Labeling (Name)
The backlight of the display window of
the remote control can be set to remain on
or off.
This function can be set with the remote
control only.
1 Enter the menu and select “EDIT” -
2 “SNelaemcteo”n. e of the following.
When labeling a
track
“
: Name”
1 While the recorder is stopped, enter
the menu and select “OPTION” -
When labeling a
disc
“
: Name”
2 “SBelAecCtKthLeIGdeHsiTre”d. item.
3 Turn the volume control repeatedly to
select a letter and press the jog lever
to enter.
Display Setting
AUTO
The backlight lights when
you operate the recorder or
the remote control, and
automatically turns off when
no operation is made for a
few seconds.
The selected letter stops flashing and
the cursor moves to the next input
position.
The cursor flashes at the next input position.
ON
The backlight lights when
the recorder is operating.
OFF
The backlight stays off.
The buttons and control used for
character input and their functions are
listed below.
Adjusting the contrast of the
display window
(Contrast Adjustment)
Functions
Operation
To move the cursor to Slide the jog lever
the left or right. (., >)
You can adjust the contrast of the display
window on the recorder.
This function can be set with the recorder
only.
To change the letter to Turn the volume
the one before/next
one.
control (VOL+, –).
To enter a letter.
Press the jog lever
(NX/ENT).
1 While the recorder is stopped, enter
the menu and select “OPTION” -
“CONTRAST”.
To enter a name.
Press the jog lever
for 2 seconds or
more (NX/ENT).
To switch between
capital letters, small
letters, and numbers/
marks.
Press P MODE/
.
2 Turn the jog dial to adjust the
contrast, and then press the jog dial to
enter the selection.
To insert a blank space. Press
+.
–.
Note
You cannot adjust the contrast with the remote
control, nor can you adjust the contrast of the
display on the remote control.
To delete a letter.
To cancel labeling.
Press
Press x for 2
seconds or more.
continued
65
For details and the recorder
operation, see page 42.
5 oPfretshsetlhaebejolgnalemvee.r for 2 seconds or
Moving a track in a disc with
group setting
more.
For details and the recorder
operation, see page 39.
1 While playing the track you want to
move enter the menu and select
: Move”.
2 “WEhDeInTm” -ov“iMngovaet”ra-c“k out of a group,
Labeling recorded groups
1 Select “
“Labeling (Name)” (page 65) and do
skip this step.
When moving a track into a different
group, slide the jog lever until the
destination group appears in the
display, and then press the jog lever.
For the details and the recorder
operation, see page 50.
Re-labeling
You can re-label recordings by following
the procedure of “Labeling (Name)”
3 Slide the jog lever repeatedly until the
number of the destination track
(within a group when moving into a
different group) appears in the
display, and then press to enter the
selection.
For details and the recorder
operation, see page 41.
Moving recorded tracks
For details and the recorder
operation, see page 51.
1 While playing the track you want to
move, enter the menu and select
Changing the order of a group
on a disc (Group Move)
“EDIT” - “Move” - “
: Move”.
Example: When moving track number 3,
“Tr003” appears in the display.
1 While playing a track within a group
whose order you want to change,
enter the menu and select - “EDIT” -
: Move”.
2 “SMlidoevteh”e-jo“g lever repeatedly to select
a destination point on the disc, and
then press to enter the selection.
2 Slide the jog lever repeatedly until the
destination track number appears in
the display.
Example: When moving to track number 2,
“Tr002” appears in the display.
Example: When moving the first group
(GP01) to the second group (GP02)
For details and the recorder
operation, see page 52.
3 Press the jog lever to enter the
selection.
66
Erasing tracks, the entire disc
or groups (Erase)
Assigning tracks or groups as
a new group (Group Setting)
Erasing tracks
1 Enter the menu and select “EDIT” -
: Set”.
2 “Slide the jog lever repeatedly until the
number of the desired first track
appears in the display, and then press
the jog lever.
1 While playing the track you want to
erase, enter the menu and select
“EDIT” - “Erase” - “
: Erase”.
“Erase OK?” and “PushENTER”
2 aPprepsesarthienjtohge ldeivseprlatyo.erase a track.
To erase the whole disc
3 Slide the jog lever repeatedly until the
number of the desired last track
1 Play the disc you want to erase to
appears in the display, and then press
2 cPhreescskxthetocostnotpe.nts.
3 Enter the menu and select “EDIT” -
“Erase” - “
: Erase”.
For details and the recorder
operation, see page 49.
“AllErase?” and “PushENTER”
4 aPprepsesarthienjtohge ldeivseprlatyo.erase the whole
Releasing a group setting
disc.
1 Select a group that you want to
release and check the contents (see
For details and the recorder
operation, see page 44.
To erase a group
1 Select a group you want to erase and
check the contents (see “To cue to the
3 Enter the menu and select - “EDIT” -
“
: Release”.
“Release?” and “PushENTER”
4 aPprepsesarthienjtohge ldeivseprlatyo.enter the
3 Enter the menu and select “EDIT” -
selection.
“Erase” - “
: Erase”.
“GP Erase?” and “PushENTER”
For details and the recorder
operation, see page 50.
4 aPprepsesarthienjtohge ldeivseprlatyo.erase a group.
For details and the recorder
operation, see page 52.
67
For details and the remote control
operation, see page 36.
Using the alarm (Melody
Timer)
Storing the settings for
individual discs
1 Enter the menu and select “USEFUL”
- “M-TIMER” - “ON”.
(Personal Disc Memory)
, lights up in the display and the
2 aTluarrnmthseoujongd dcaianl breepseealteecdtelyd.to select
the alarm sound, and then press the
jog dial.
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted.
The following setting can be stored:
• Volume
varieties of alarm sound.
• Play mode
• Group mode
• Program play
• Sound quality (Virtual Surround/6-Band
Equalizer)
• Playback speed (Digital Pitch Control)
• Bookmark
3 Turn the jog dial to select the elapsed
1 When the recorder is stopped,
playing, or play-paused, enter the
menu and select “USEFUL” -
“PERSONAL”.
time.
“Entry?” appears in the display.
Display window on the recorder
One rotation of the control changes
the elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
4 kPereespsttuhrenijnogg tdhiealjotogedniatel.r the
Display window on the remote control
selection.
The time remaining until the alarm is
shown in the display while the
recorder is stopped.
2 Press the jog dial (on the recorder) or
jog lever (on the remote control) to
enter the selection.
To cancel the alarm setting
Select “OFF”.
“Entry OK” appears in the display
and the disc settings are stored in the
recorder.
To stop the alarm
Press any button.
68
Erasing the disc information
1 Insert the disc whose information is to be
erased and verify its contents.
“Erase OK” appears in the display and the
disc information is erased.
Note
If you try to erase the disc information of a disc
that have never been stored, “No Entry!”
appears in the display for a few seconds.
z
“PERSONAL” appears when the disc with its
setting stored is inserted.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace the
settings for the least used disc among the 20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this case,
store the settings again.
69
List of menus
Menus on the recorder
Items listed under “Menu 1” are the selectable items which appear when you press the jog
dial, items listed under “Menu 2” are the selectable items which appear when you select an
item in Menu 1, and “Menu 3” are the selectable items which appear when you select an
item in Menu 2.
Note
Different indication may be displayed depending on the operating conditions and disc settings.
Menu 1
Menu 2
Name
: Set
Menu 3
: Name y
EDIT
: Name y
: Name
: Erase
—
—
: Release
Move
Erase
: Move y
: Move
: Erase y
: Erase y
DISPLAY LapTime
RecRemain (while
—
—
recording and
stopped)/1 Remain
(while playing)
GP Remain
AllRemain
Title
—
—
—
—
—
Sound
Clock(while recording
and stopped)/Rec Date
(while playing)
PLAY
MODE
Normal
RepeatOFF (factory setting) y RepeatON
1 Track
TrPLAY
Shuffle
Program
:Normal
: Shuffle
:Program
SOUND OFF
V-SUR
SOUND
—
STUDIO y LIVE y CLUB y ARENA
SOUND EQ
HEAVY y POPS y JAZZ y UNIQUE y
CUSTOM1 y CUSTOM2
70
Menu 1
Menu 2
Menu 3
USEFUL PERSONAL
M-TIMER
Entry? y Erase?
OFF (factory setting) y ON
—
DPC
AUDIO OUT
REC SET REC MODE
RecVolume
HeadPhone (factory setting) y LINE OUT
SP (factory setting) y LP2 y LP4 y MONO
Auto REC (factory setting) y ManualREC
OFF (factory setting) y ON
SENS HIGH (factory setting) y SENS LOW
TIME MARK
MIC SENS
: REC
: REC OFF (factory setting) y
: REC ON
SYNC REC
SYNC OFF (factory setting) y SYNC ON
AVLS OFF (factory setting) y AVL S ON
BEEP OFF y BEEP ON (factory setting)
From Here (factory setting) y From End
OPTION
AVLS
BEEP
REC-Posi
PowerMode
NORMAL (factory setting) y QUICK y
PowerSave
CONTRAST
JOG DIAL
—
DEFAULT (factory setting) y REVERSE
CLOCK SET
—
On the remote control
Menu 1 Menu 2 Functions
EDIT Name
: Set
: Release
Move
Erase
: Name y
: Name y
: Name
: Erase
—
—
: Move y
: Move
: Erase y
: Erase y
USEFUL PERSONAL Entry? y Erase?
M-TIMER
DPC
OFF (factory setting) y ON
—
OPTION AVLS
BEEP
AVLS OFF (factory setting) y AVLS ON
BEEP OFF y BEEP ON (factory setting)
BACKLIGHT AUTO (factory setting) y ON y OFF
PowerMode NORMAL (factory setting) y QUICK y PowerSave
71
Power sources
4) When using a Sony LR6 (SG) “STAMINA”
alkaline dry battery (produced in Japan).
You can use the recorder on house current
or as follows.
When playing
• a nickel metal hydride rechargeable
battery NH-14WM
(Unit: approx.hours)(JEITA)
• LR6 (size AA) alkaline dry battery
(used with the supplied dry battery case)
Batteries
SP
LP2
LP4
Stereo Stereo Stereo
Nickel metal 31
hydride
rechargeable
battery
38
45
It is preferable to use the recorder on
house current when recording for a long
time. When powering the recorder with
batteries, make sure the rechargeable
battery is fully charged or that the alkaline
dry battery is new to prevent battery
exhaustion in the middle of a recording
operation.
LR6 (SG)
47
57
95
69
Sony alkaline
dry battery
Nickel metal 80
hydride
rechargeable
battery + One
LR6 (SG)
114
Battery life1)
The battery life may be shorter due to
operating conditions, the temperature of
the location, or the type of alkaline dry
battery being used.
When to replace the batteries
When the dry battery or rechargeable
battery is weak, flashing r or “LOW
BATT” appears in the display. Replace the
dry battery or charge the rechargeable
battery.
When recording
(Unit: approx.hours)(JEITA2))
Batteries
SP
LP2
LP4
Stereo Stereo Stereo
The battery level indicator is approximate.
It may be more or less than the indication
depending on the operating condition or
the operating environment.
Nickel metal
hydride
11
16
20
rechargeable
battery3)
Note
LR6 (SG)
11
29
16
38
21
50
Stop the recorder before replacing the battery.
Sony alkaline
dry battery4)
Nickel metal
hydride
rechargeable
battery3)
+ One LR6
(SG)4)
1) Measured with the power save mode on (see
2) Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.
3) When using a 100% fully charged nickel metal
hydride rechargeable battery.
72
Additional information
On the headphones/earphones
Road safety
Precautions
Do not use headphones/earphones while
driving, cycling, or operating any motorized
vehicle. It may create a traffic hazard and is
illegal in many areas. It can also be potentially
dangerous to play your recorder at high volume
while walking, especially at pedestrian
crossings. You should exercise extreme caution
or discontinue use in potentially hazardous
situations.
On safety
Do not put any foreign objects in the DC IN 3V
jack.
On power sources
• Use house current, nickel metal hydride
rechargeable battery, LR6 (size AA) battery,
or car battery.
• For use in your house: For the supplied battery
charging stand, use the AC power adaptor
supplied with this recorder. Do not use any other
AC power adaptor since it may cause the recorder
to malfunction.
Preventing hearing damage
Avoid using headphones/earphones at high
volume. Hearing experts advise against
continuous, loud and extended play. If you
experience a ringing in your ears, reduce the
volume or discontinue use.
Caring for others
Polarity of the
plug
Keep the volume at a moderate level. This will
allow you to hear outside sounds and to be
considerate of the people around you.
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor,
disconnect it from the AC outlet immediately.
• The recorder is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
recorder itself has been turned off.
• If you are not going to use this recorder for a
long time, be sure to disconnect the power
supply (AC power adaptor, dry battery,
rechargeable battery, or car battery cord). To
remove the AC power adaptor from the wall
outlet, grasp the adaptor plug itself; never pull
the cord.
On the remote control
The supplied remote control is designed for use
with this recorder only. The recorder cannot be
operated with a remote control that was
supplied with another device.
On charging
• The supplied battery charging stand can be
used only with this recorder. Any other
models cannot be charged.
• Do not use the supplied battery charging stand
to charge any other battery besides the
supplied one or the one designated for it (NH-
14WM).
• Be sure to use the supplied AC power adaptor.
• Charge the rechargeable battery at a
temperature of +5° C (+41° F) to +40° C
(+104° F).
• Though the battery charging stand and the
battery may become hot during the charging
procedure, this poses no danger.
On heat build-up
Heat may build up in the recorder if it is used
for an extended period of time. This, however,
is not a malfunction.
On installation
• If you are charging the battery for the first
time or after a long period of disuse, the
battery may not charge up to its rated capacity.
This is a normal characteristic. After you use
and recharge the battery a few times, it will
return to its normal charge capacity.
• Never use the recorder where it will be
subjected to extremes of light, temperature,
moisture or vibration.
• Never wrap the recorder in anything when it is
being used with the AC power adaptor. Heat
build-up in the recorder may cause
malfunction or damage.
73
• If the capacity of the rechargeable battery
drops to half the normal amount, replace with
the new one.
On mechanical noise
The recorder gives off mechanical noise while
operating, which is caused by the power-saving
system of the recorder and it is not a problem.
On the dry battery case
To protect a recorded MD
The supplied dry battery case is designated for
this recorder only.
To record-protect an MD, slide open the tab at
the side of the MD. In this position, the MD
cannot be recorded. To record again, slide the
tab back so the tab is visible.
On the MiniDisc cartridge
• When carrying or storing the MiniDisc, keep
it in its case.
• Do not break open the shutter.
• Do not place the cartridge where it will be
subject to light, extreme temperatures,
moisture or dust.
Tab
• Attach the supplied MD label only in the
space designated for it on the disc. Do not
stick it on any other disc surface.
Recorded material is
protected.
Back of the MD
On cleaning
• Clean the recorder casing with a soft cloth
slightly moistened with water or a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such
as alcohol or benzene as it may mar the finish
of the casing.
Recorded material is
not protected.
• Wipe the disc cartridge with a dry cloth to
remove dirt.
• Dust on the lens may prevent the unit from
operating properly. Be sure to close the disc
compartment lid after inserting or ejecting an
MD.
• To obtain the best sound quality, use a dry
cloth to wipe the plugs of the headphones/
earphones or the remote control. Dirty plugs
may cause sound distortion or intermittent
breaks in the sound.
On maintenance
Clean the terminals periodically with a
cotton swab or a soft cloth as illustrated.
On batteries
Incorrect battery usage may lead to leakage of
battery fluid or bursting battery. To prevent
such accidents, observe the following
precautions:
• Install the + and – poles of the batteries
correctly.
If you have any questions or problems
• Do not try to recharge dry battery.
• When the recorder is not to be used for a long
time, be sure to remove the batteries.
• If a battery leak should develop, carefully and
thoroughly wipe away battery fluid from the
battery compartment before inserting new
ones.
concerning your recorder, please consult your
nearest Sony dealer. (If a trouble occurred when
the disc was in the recorder, we recommend that
the disc be left in the recorder when you consult
your Sony dealer so that the cause of trouble
may be better understood.)
74
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
Specifications
120 V AC, 60 Hz (Models for USA, Canada,
Mexico and Taiwan)
230 V AC, 50/60 Hz (Models for continental
Europe)
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
240 V AC, 50 Hz (Model for Australia)
220 V AC, 50 Hz (Models for China and
Argentine)
230 V AC, 50 Hz (Models for U.K. and
Hong Kong)
100 - 240 V AC, 50/60 Hz (Other models)
The recorder:
Nickel metal hydride rechargeable battery
NH-14WM, 1.2 V, 1350 mAh (MIN),
Ni-MH
LR6 (size AA) alkaline battery
Battery charging stand:
AC power adaptor DC 3V
Battery operation time3)
Dimensions
Approx. 78.9 × 72.2 × 15.9 mm (w/h/d)
(31/8 × 27/8 × 21/32 in.) (excluding projecting
parts and controls)
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
Recording and playback time (when
using MDW-80)
Maximum 160 min. in monaural
Maximum 320 min. in LP4 stereo
Revolutions
350 rpm to 3,600 rpm (CLV)
Error correction
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
ATRAC (Adaptive TRansform Acoustic
Coding)
Mass
Approx. 93 g (3.3 oz)
1)The LINE IN (OPT) jack is used to connect
either a digital (optical) cable or a line
(analog) cable.
ATRAC3 — LP2/LP4
Modulation system
2)The i/LINE OUT jack connects either
headphones/earphones or a line cable.
3)Measured in accordance with JEITA.
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz ± 3 dB
Inputs1)
US and foreign patents licensed from Dolby
Laboratories.
MIC: stereo mini-jack
(minimum input level 0.25 mV)
Line in:
stereo mini-jack for analog input
(minimum input level 49 mV)
optical (digital) mini-jack for optical
(digital) input
Design and specifications are subject to change
without notice.
Optional accessories
Optical Cable
POC-151HG, POC-152HG, POC-MZ1,
POC-MZ2, POC-15B, POC-15AB, POC-
DA12SP
Line Cable
RK-G129, RK-G136
Stereo Microphones ECM-719, ECM-MS907,
ECM-MS957
Outputs
remote control jack)/194 mV (10 kΩ)
Maximum output (DC)2)
Headphones:
4 mW + 4 mW (16 Ω)
MDR-series Stereo Headphones/earphones*
SRS-series Active Speakers
Recordable MDs MDW-series
75
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
detailed information about the accessories in
your country.
∗ When using optional headphones, use only
headphones/earphones with stereo mini
plugs. You cannot use headphones/
earphones with micro plugs.
76
Troubleshooting and explanations
Troubleshooting
If a problem occurs during recorder operation, follow the steps described below before
consulting the nearest Sony dealer. If any messages appear, it is recommended to take
notes.
2 ICfhaefctekr“sMtepes1saygoeus”st(ipllagcaen8n5o)tfsoorlvtheethperopbrloebmleams,wcoelnls.ult your nearest Sony dealer.
While charging
Symptom
Cause/Solution
The rechargeable
battery does not
start charging. The
rechargeablebattery
cannot be fully
charged.
• The rechargeable battery or the dry battery has been inserted
incorrectly or the AC power adaptor has been connected
incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
• The terminals of the battery charging stand is dirty.
, Clean the terminals with a dry cloth.
• Because of the battery’s characteristics, the capacity of the
rechargeable battery may be smaller than normal when it is used
for the first time or after a long period of disuse.
, Charge and discharge the battery several times. The normal
battery life will be restored.
• The rechargeable battery is drained (nothing appears in the
display window).
, Charge the rechargeable battery. It takes one minute after
placing the recorder on the battery charging stand for an
indication to appear and charging to start. If charging does not
start even after a minute, replace the recorder on the battery
charging stand again.
The rechargeable
battery has become
drained even when
the recorder was not
used for a while.
• The quick mode was set to “QUICK”.
, If you set the quick mode to “QUICK”, the power stays on
inside recorder even when there is no operation, causing the
battery life to shorten. If the battery is not fully charged, the
rechargeable battery may become drained after a while. If this
Even when fully
charged, the life of
the battery is only
about half what it
normally is.
• The useful life of the rechargeable battery may be ending.
, Replace the rechargeable battery with the new one.
77
Symptom
Cause/Solution
The battery
• This is normal and poses no danger.
charging stand and
the recorder become
hot during the
charging procedure.
While recording
Symptom
Cause/Remedy
The recorder
overwrites existing
materials when record.
• The record starting-position setting (“REC-Posi”) is set to
“From Here”.
, Set “REC-Posi” setting to “From End”.
The recording starts
from the end of the
disc even when “REC-
Posi” is set to “From
Here”.
• The group recording (“ : REC”) is set to “ : REC ON”.
(You cannot overwrite tracks when “ : REC” is set to “
REC ON”.)
:
, Set the group recording setting to “ : REC OFF”
“REC-Posi” (the
record-starting point)
cannot be set to “From
Here”.
• The group recording (“ : REC”) is set to “ : REC ON”.
, Set the group recording setting to “ : REC OFF”
(page 60), and then set “REC-Posi” to “From Here”.
Recording cannot be
done correctly.
• Audio sources may not be securely connected.
, Disconnect the audio sources once and connect them again
• There is no digital signal from the portable CD player.
, When recording digitally from a portable CD player, use
the AC power adaptor and disable the anti-skip function
• The analog recording was made using a connecting cord with
an attenuator.
, Use a connecting cord without an attenuator.
• Recording level is too small to record (when adjusting the
recording level manually).
• The power sources was disconnected or a power outage
occurred during recording.
, The recording result is not recorded on the disc. Make
recording again.
• The premastered MD is inserted.
, Replace to the recordable MD.
• The remaining recordable time on the disc is 12 seconds or less
(“DISC FULL” appears).
, Replace the disc.
78
Symptom
Cause/Remedy
Recording stops
automatically in the
middle of a recording
operation.
• You tried to overwrite a track which is checked out from the
computer. (Tracks that are checked out from the computer
cannot be overwritten. The recording stops automatically.)
, Check the checked-out track back into the computer.
, Record from the end of the disc.
Stereo sound is heard • This is normal. During digital recording, the sound will be
in the headphones/
earphones while
stereo in the headphones/earphones, even though the recorded
sound is monaural.
recording in monaural.
Momentary noise is
heard when recording.
• Due to the special digital audio compression technology used
in LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in SP or LP2 mode.
The lid does not open • The lid does not open until “TOC Edit” disappears in the
after recording.
display.
“TR FULL” appears
even before the disc
has reached the
maximum recording
time (60, 74, or 80
minutes) and the
recording cannot be
done.
• This is due to the MiniDisc system limitation. When 254 tracks
have been recorded on the disc, “TR FULL” appears regardless
of the total recorded time. More than 254 tracks cannot be
recorded on the disc.
, To continue recording, erase unnecessary tracks.
The remaining
• This is due to the MiniDisc system limitation. Tracks of under
12 seconds (in SP stereo), 24 seconds (in LP2 stereo mode or
monaural), or 48 seconds (in LP4 stereo mode) in length are
not counted and so erasing them may not lead to an increase in
the recording time.
recording time does
not increase even after
erasing numerous
short tracks.
The total recorded
• This is due to the MiniDisc system limitation. Normally,
recording is done in minimum units of approximately 2
seconds (in SP stereo), 4 seconds (in LP2 stereo mode or
monaural), or 8 seconds (in LP4 stereo mode). When recording
is stopped, the last unit of recording always uses this unit of 2
seconds, 4 seconds, or 8 seconds even if the actual recording is
shorter. Likewise, when recording is restarted after the stop,
the recorder will automatically insert a blank space amounting
to 2 seconds, 4 seconds, or 8 seconds before the next recording.
(This is to prevent accidental erasing of a previous track
whenever a new recording is started). Therefore, the actual
recording time will decrease whenever a recording is stopped
by a maximum of 6 seconds, 12 seconds, or 24 seconds.
time and the remaining
time on the disc may
not total the maximum
recording time (60, 74,
or 80 minutes).
79
Symptom
Cause/Remedy
You cannot check out • The minimum recordable time on a disc is normally 2 seconds
tracks that will fill up
the remaining
recording time on the
disc.
in stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4
stereo mode. When you check out a track from your computer,
the recorder needs a 2-second (or 4- or 8-second) space for a
track even if the track is under 2 seconds (or 4 or 8 seconds) in
length. Also, the recorder inserts a 2-second (or 4 -or 8-second)
space in between tracks during check out so as not to overwrite
the previous track by mistake. For this reason, the recorder
needs an additional 6 seconds (or 12 or 24 seconds) for each
track. This reduces the maximum recording time for each track
by 6 seconds (or 12 or 24 seconds) during check out.
“TR FULL” appears
even before the disc
has reached the
maximum track
number or recording
time.
• This is due to the MiniDisc system limitation. Repeated
recording and erasing may cause fragmentation and scattering
of data. Although those scattered data can be read, each
fragment is counted as a track. In this case, the number of
tracks may reach 254 and further recording is not possible.
, To continue recording, erase unnecessary tracks.
While playing
Symptom
Cause/Remedy
An MD is not
• Repeat play is selected.
played normally.
, Use the jog dial on the recorder or press P MODE/ on the
• Playback mode is changed.
, Use the jog dial on the recorder or press P MODE/ on the
An MD is not
played from the
first track.
• Disc playing stopped before it came to the last track.
, Press N on the recorder or press the jog lever (NX) on the
remote control for 2 seconds or more to start playing.
• The disc information has been stored to the Personal Disc Memory.
, Erase the disc information from the Personal Disc Memory
Playback sound
skips.
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a short track.
Sound has a lot of • Strong magnetism from a television or such device is interfering
static.
with operation.
, Move the recorder away from the source of strong magnetism.
80
Symptom
Cause/Remedy
The volume of the • The track was recorded in analog mode (in digital mode, the
recorded track is
low.
recording level is automatically set to the same level as that of the
sound source). Or you used a connecting cord with an attenuator.
, Use a correct connecting cord without an attenuator.
• The recording level was low.
Volume cannot be • AVLS is on.
turned up.
• The “CUSTOM1” or “CUSTOM2” on “SOUND” settings are
being applied.
, This is not malfuntion. When either of these settings is applied,
the maximum volume setting will be limited to a certain level
(“VOL 24”) to prevent excessive loudness.
No sound comes
through the
headphones/
earphones.
• The headphones/earphones plug is not firmly connected.
, Plug in the plug of the headphones/earphones firmly to the
remote control. Plug in the plug of the remote control firmly to
i/LINE OUT.
• The plug is dirty.
, Clean the plug.
VOL + or –,
• The “AUDIO OUT” parameter is set to “LINE OUT”.
Virtual Surround,
or 6-Band
, Set to “HeadPhone”.
Equalizer does not
function or noise is
heard.
The volume from • The “AUDIO OUT” parameter is set to “HeadPhone”.
connected speaker
or amplifier is low
(when analog
, Set to “LINE OUT”.
connection)
The volume from • The “AUDIO OUT” parameter is set to “LINE OUT”.
the headphones/
earphones is too
loud.
, Set to “HeadPhone”.
The recorder skips • The group skip is on.
several tracks
ahead or behind
whenever you try
to fast forward or
rewind on the
recorder.
, The recorder returns to normal if no operation is made for 5
seconds.
The edited tracks • This occurs due to the MiniDisc system limitation. The
may exhibit sound
dropout during
search operations.
fragmentation of data may cause sound dropout while searching
because the tracks are played in higher speed than normal
playback.
81
Symptom
Cause/Remedy
There is no R-
channel sound
output when
playing a track
recorded from a
cassette deck or
through an
• There is no R-channel output if the cassette deck or an amplifier is
connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the
connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.
amplifier, or when
listening to sound
from a cassette
deck or amplifier.
While Editing
Symptom
Cause/Remedy
The lid does not
open.
• The power sources have been disconnected during recording or
editing, or the battery have been exhausted.
, Set the power sources again, or replace the exhausted battery
with new ones.
Editing cannot be • The power source has been disconnected or a power outage has
done.
occurred during editing.
, The editing done to that point is not saved to the disc. Do the
editing operation again.
You cannot erase a • This is due to the MiniDisc system limitations. To erase a track that
track checked out
from your
has been checked out from your computer, check it back in first,
and then erase it using the SonicStage software.
computer.
Track marks
cannot be erased.
• This is due to the MiniDisc system limitations. When the data of a
track is fragmented, the track mark of a fragment under 12 seconds
long (in SP stereo), 24 seconds long (in LP2 stereo mode or
monaural mode), or 48 seconds long (in LP4 stereo mode) cannot
be erased. You cannot combine tracks recorded in different
recording modes, e.g., a track recorded in stereo and a track
recorded in monaural; nor can you combine a track recorded with
digital connection and a track recorded with analog connection.
The disc cannot
edit on other
component.
• The component does not support MDLP.
, Edit on other component that support MDLP.
82
While using group function
Symptom
Cause/Remedy
The group
function does not
operate.
• While using a disc without group setting, an attempt was made to
select some group-related menu.
, Use a disc with group setting.
A track cannot be • This is due to the MiniDisc system limitations. Group information
recorded to a new
group. A new
group cannot be
created.
has been written to the area where the disc name is stored. The disc
name and track names are recorded in the same area, which can
store a maximum of approximately 1,700 characters. If the total
number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group
settings at this time.
Others
Symptom
Cause/Remedy
The recorder does • The rechargeable battery is not charged.
not work or works
poorly.
, Charge the rechargeable battery.
• The volume is low.
, Turn up the volume.
• No disc is inserted.
, Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the recorder).
, On the recorder, disable HOLD by sliding the HOLD switch to
• The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
, Take the MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
• The AC power adaptor is not firmly connected.
, Connect the AC power adaptor firmly to the DC IN 3V jack on
the recorder or the battery charging stand and to the house
current.
• The rechargeable battery or dry battery is weak (“LOW BATT”
flashes or nothing appears).
, Charge the rechargeable battery or replace the dry battery with
• The dry battery have been inserted incorrectly.
83
Symptom
Cause/Remedy
The recorder does • The disc is damaged or does not contain proper recording or
not work or works
poorly.
editing data.
, Reinsert the disc. Rerecord the disc. If the error message still
appears, replace it with another disc.
• There is an internal malfunction in the system.
, Remove the dedicated USB cable from the recorder, restart
your computer, and then connect the cable to the recorder
again.
• While operating, the recorder received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources.
2 Leave the recorder for about 30 seconds.
3 Connect the power source.
The clock does not • The recorder was disconnected from the power source for 3
work correctly, the
clock does not
appear, or time and
date stamping did
not occur when
recording.
minutes or more, causing the clock to return to its factory setting.
, Charge the rechargeable battery, and then set the clock again.
• The clock is not set.
• Time and date will not be stamped on tracks which are checked out
from a computer.
During playback,
the display on the
remote control
• Power save mode is activated.
, In power save mode, the display on the remote control turns on
whenever the remote control is operated, but not when the
controls on the recorder are operated. (The exception is when
the GROUP button on the recorder is pressed.)
does not turn on.
The display
window is not
normal.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
When using with
the AC power
adaptor, the display
window of the
recorder will
• This is due to the MiniDisc system limitation. The recorder turns
off 3 minutes after the recorder has stopped in order to allow the
charging time on the dedicated USB cradle to be calculated.
remain faintly lit
for some time even
after the recorder is
stopped.
The playing time of This is due to a calculation discrepancy between the recorder and
a checked-out track the computer.
is different from
the time that
appears on your
computer monitor.
84
Messages
If the following error messages flash in the display window, check the chart below.
Error message Meaning/Remedy
FULL
• You tried to set a 21st bookmark.
, You can set only up to 20 bookmarks. Keep the number of
bookmarks within 20.
AVLS
• AVLS is set to “AVLS ON” and so the volume cannot rise higher.
BLANKDISC
BUSY
• An MD with no recording on it is inserted.
• You tried to operate the recorder while it was accessing the
recorded data.
, Wait until the message goes out (in rare cases, it may take a
few minutes).
CannotCHG
• You tried to charge the battery at a place with a temperature
outside the specified range for the recorder.
, Charge the battery at a temperature of +5° C (+41° F) to +40° C
(+104° F).
Charging
• The rechargeable battery is being charged.
DISC FULL
• The remaining recording time on the disc is 12 seconds (SP
stereo), 24 seconds (LP2 stereo or monaural), 36 seconds (LP4
stereo), or less.
, Replace the disc.
ERROR
• There is an internal malfunction in the system.
message appears again, please consult your nearest Sony
dealer.
GroupFULL
Hi DC in
• You tried to create a 100th group.
, You can create only up to 99 groups on a disc. Keep the group
number within 99.
• Voltage of the power supply is too high (The supplied AC power
adaptor or the recommended car battery cord is not used).
, Use the supplied AC power adaptor or the recommended car
battery cord.
HOLD
• The recorder is locked.
LINE OUT
• You pressed VOL+, – while the “AUDIO OUT” parameter was set
to “LINE OUT”.
, Use the jog dial to set the “AUDIO OUT” parameter to
“HeadPhone”.
85
Error message Meaning/Remedy
LOW BATT
MEM OVER
MENU
• Batteries are weak.
, Charge the rechargeable battery or replace the dry battery
• You tried to record with the recorder placed where it receives
continuous vibration.
, Put the recorder on a stable place, and start recording again.
• You pressed a key on the remote control while selecting a menu on
the recorder.
• You pressed a key on the recorder while selecting a menu on the
remote control.
NAME FULL
NO COPY
• You tried to enter more than 200 letters to label a single track,
group, or disc.
• You tried to enter a total of more than approximately 1,700 letters
for track or disc names.
• You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
NO DISC
NO EDIT
• You tried to play or record with no disc in the recorder.
, Insert an MD.
• You selected “ : Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• You selected, “ : Set”, “ : Release”, “Move”, or “Erase” while
recording.
• You tried to erase the track mark at the beginning of the first track
or group.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to overwrite a track marks.
No Entry!
• You tried to erase a setting in the Personal Disc Memory on a disc
No MARK
• You selected bookmark play without setting bookmarks.
86
Error message Meaning/Remedy
NO SET
• You tried to set Digital Pitch Control while the “AUDIO OUT”
parameter was set to “LINE OUT”.
, Use the jog dial to set the “AUDIO OUT” parameter to
“HeadPhone”.
• You tried to make the following settings while recording.
— Personal Disc Memory
— Melody Timer
— Digital Pitch Control
— Recording mode
— Recording level
— Selection of “ : REC” in menu
— Selection of “REC-Posi” during recording to a group.
NoOPERATE
• You pressed
remote control.
+ or – while programming a track using the
• You tried to make the Auto Time Mark setting while recording
through digital connection.
• You tried to press X or T MARK during synchro-recording.
NO SIGNAL
P/B ONLY
• The recorder could not detect digital input signals.
• You tried to record or edit on a pre mastered MD (P/B stands for
“playback”).
, Insert a recordable MD.
PROTECTED
Push STOP
• You tried to record or edit on a MD with the tab in the record-
protect position.
• You tried to open the lid while the recorder was storing disc
information.
, Open the lid only after pressing x and “TOC Edit” has
disappeared from the display.
READ ERR
REC ERR
• The recorder cannot read the disc information correctly.
, Reinsert the disc.
• Recording was not correctly done.
, Place the recorder at a place with no vibrations and record
again.
• The disc is soiled with an oil film or finger prints, is scratched, or
is not a standard disc.
, Try recording again with another disc.
Rehearsal
• You tried to operate a button and or a lever (other than the control)
on the remote control while the recorder is performing rehearsal
play during a track division operation.
87
Error message Meaning/Remedy
SEL Group
SEL Track
SLOW CHG
• You selected “
the recorder is stopped or while playing a track that does not
belong to a group.
: Name”, “
: Move”, or “
: Erase” while
, Select a track within a group you want to edit, and then do the
editing operation again.
• You selected “
: Name”, “
: Move”, or “
: Erase” after
playback has already finished or after END SEARCH was pressed,
and the recorder has stopped.
, Do the editing operation again after selecting the desired track
first.
• You tried to charge at a place where the temperature is too low.
, Charge the battery at a temperature of +5°C (+41°F) to +40°C
(+104°F).
TEMP OVER
TOC Edit
• Heat has built up in the recorder.
, Let the recorder cool down.
• The MD player is recording information (track start and end
position) from the memory to the disk.
, Wait until this process is completed. Do not expose the player
to physical shock, nor disrupt power supply.
TOC ERR
• The recorder cannot read the disc information correctly.
, Insert another disc.
TR FULL
• Track number 254 has been reached.
TrPROTECT
• You tried to record or edit a track that is protected from erasing.
, Record or edit on other tracks.
• You tried to edit a track that has been checked out from a
computer.
, Check the track back in to the computer and then edit.
88
Explanations
Difference between digital (optical) and analog (line) inputs
The input jack of this recorder works as both digital and analog input jacks. Connect the
recorder to a CD player or a cassette recorder using either digital (optical) input or analog
digital (optical) input, and “Recording from a TV or radio (Analog Recording)” (page 28)
to record using analog (line) input.
Difference Digital (optical) input
Analog (line) input
Connectable Equipment with an digital (optical)
Equipment with an analog (line)
output jack (Casette deck, radio,
record player, etc.)
source
output jack (CD player, DVD player,
etc.)
Usable cord Optical cable (with an optical or an
optical-mini plug) (page 20)
Line cable (with 2 phono plugs
or a stereo-mini plug) (page 28)
Signal from Digital
the source
Analog
Even when a digital source (such
as a CD) is connected, the signal
sent to the recorder is analog.
Track
Marked (copied) automatically
• at the same positions as the source
(when the sound source is a CD or an
MD).
Marked automatically
• after more than 2 seconds of no
segment.
marks1)
• after more than 2 seconds of no
(with a sound source other than a CD
or an MD).
• when the recorder is paused
while recording.
• when the recorder is paused (3
seconds of no sound is encountered
while synchro-recording)
Recorded
sound level
Same as the source.
Adjusted automatically. Can also
be adjusted manually (“Adjusting
Can also be adjusted manually (Digital
Note
Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital (optical) input.
• when the source is in shuffle or program play mode while recording using digital (optical) input. In
this case, play the source in normal play mode.
• when programs with audio that is digitally broadcast (e.g., digital TV) are recorded through the digital
(optical) input.
89
The meaning of “no sound”
“No sound” describes a recorder condition in which the input level is about 4.8 mV during analog input
or less than –89 dB during optical (digital) input (with 0 dB as full bit (the maximum recordable level
for a MiniDisc)).
Note on digital recording
This recorder uses the Serial Copy Management System, which allows only first-generation digital
copies to be made from premastered software. You can only make copies from a home-recorded MD by
using the analog (line out) connections.
Premastered software such as CDs or
MDs.
Microphone, record player, tuner, etc. (with
analog output jacks).
Analog recording
Digital recording
Home-recorded MD
Digital recording
Home-
recorded digital
MD recording
No
Recordable
MD
No
digital
recording
Recordable
MD
Recordable
MD
Restrictions on the editing of tracks checked out from your
computer
This unit was designed so that editing functions (i.e., erasing tracks, adding track marks, and
erasing track marks) do not function for tracks that have been checked out from your computer.
This is to prevent the loss of check-in authorization by the checked-out tracks. To edit these
tracks, first check them back into the computer, and then edit them on the computer.
About the DSP TYPE-S for ATRAC/ATRAC3
This recorder supports DSP TYPE-S, a specification for high-level Sony MiniDisc decks
equipped with digital signal processors (DSP). This specification allows the recorder to produce
high-quality sound from tracks recorded in MDLP mode. Since it retains DSP TYPE-R support,
the recorder produces superior results during recording or playback in SP (normal stereo) mode.
90
Recording audio data to
your computer
You can record audio data to your computer from
Audio CDs
Internet
On the computer
Listening
You can listen to an audio CD in the CD-
ROM drive of your computer, or audio
data in the hard disk drive (page 107).
92
What is a Net MD?
Net MD is a standard that enables the transfer of audio data from a computer to a MiniDisc
device. To use this Net MD with your computer requires a software application called
“SonicStage”.
SonicStage software provides a database for managing audio data in the computer and
functions for playing the audio data in various play modes, editing the data, and
transferring the results to other devices and hardware connected to the computer. It is an
integrated software application with a variety of functions for enjoying music.
Transferring audio data to
the Net MD
You can transfer audio data stored in your computer to an MD
To a Net MD
Creating a music
library
Editing
You can easily edit audio data or add
You can create a music library of your
favorite songs on your computer.
93
Basic Operations
Basic operational flow using the Net MD
The following is the basic steps that you will take following the purchase of your recorder.
Through these steps, you will prepare and set up your computer for use of your recorder as
a Net MD. Do the following steps, and refer to the indicated pages for details.
1 Providing the required system
environment.
2 Installing the software onto your
computer.
3 Connecting the Net MD to your computer.
4 Storing audio data to your computer.
In this manual, recording from an audio CD is explained.
5 Transferring audio data from your
computer to an MD (Check-out).
6 Listening to an MD.
You can listen to audio data that have been checked out from your computer to your Net
MD.
94
Providing the required system environment
System requirements
The following hardware and software are required in order to use the SonicStage software
for the Net MD.
Computer
IBM PC/AT or Compatible
• CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher
is recommended.)
• Hard disk drive space1): 120 MB or more
• RAM: 64 MB or higher (128 MB or higher is recommended)
Others
• CD-ROM drive (capable of digital playback by WDM)
• Sound Board
• USB port (supports USB 2.0 Full Speed (previously USB 1.1))
Operating
System
Factory installed:
Windows XP Home Edition/Windows XP Professional/Windows
Millennium Edition/Windows 2000 Professional/Windows 98 Second
Edition
Display
Others
High Color (16bit) or greater, 800 × 480 dots or more (800 × 600 dots
or more is recommended)
• Internet access: for Web registration and EMD services
• Windows Media Player (version 7.0 or higher) installed for playing
WMA files
1)
This software is not supported by the following environments:
• Macintosh
• Windows XP versions other than Home Edition or Professional
• Windows 2000 versions other than Professional
• Windows 98 versions other than Second Edition
• Windows NT
• Windows 95
• Personally constructed PCs or operating systems
• An environment that is an upgrade of the original manufacturer-installed operating system
• Multi-boot environment
• Multi-monitor environment
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all
computers.
95
Installing the software onto your computer
This section explains the installation of the SonicStage Ver.1.5 software supplied with your
Net MD.
Before installing the software
1 Make sure to note the following before installing the software.
Do not connect the dedicated USB cable before the installation!
The SonicStage software may not correctly load or operate if the dedicated USB
cable is connected to your computer during the installation.
Close all other Windows applications before starting the installation!
Make sure to close any virus-check software, as such software usually demand large
amounts of system resources.
2 Depending on the following operating system or software already installed
on your computer, refer to the reference pages before installing the
software.
Windows XP
• To install this software, you must log on with a
user name with “Computer Administrator”.
• If you perform the “System Restore” function in
the Windows “System Tools” menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
, page 110
Windows Millennium Edition
• If you perform the “System Restore” function of
the Windows “System Tools” menu, the tracks
managed by SonicStage may become corrupted
and rendered unplayable.
, page 111
Windows 2000
• You must log on as “Administrator” before
installing the software.
, page 111
OpenMG Jukebox,
SonicStage, or SonicStage
Premium
• Depending on the version of your software, the
existing software may be overwritten by the new
version or it may co-exist with SonicStage
Ver.1.5. As the installation process will depend
on the version, see the reference page for details.
, page 112
96
Installing SonicStage Ver.1.5
1 Turn on your computer and start up Windows.
2 Insert the installation CD-ROM for SonicStage into the CD-ROM drive of
your computer.
The setup program starts up automatically
and the SonicStage Ver.1.5 installation
window appears.
3 Click to select [SonicStage 1.5].
To use this software with the Net MD, you must install SonicStage Ver.1.5 and the Net
MD driver.
Click [SonicStage 1.5]
• When installing SonicStage for
the first time
• When SonicStage, SonicStage
Premium, or OpenMG Jukebox
is installed on the computer
continued
97
4 Follow the displayed instructions.
Read the instructions carefully.
The installation may take 20 to 30 minutes,
depending on your system environment
5 After the installation is completed, click [Restart] to restart the computer.
Make sure to restart your computer only after
the installation has completed.
Was the installation successful?
If any trouble occurs during the installation, see “Troubleshooting” (page 116).
Notes
• Do not delete, move, or edit any of the installed folders using Explorer or any other application. Doing
so could cause the SonicStage database to become unstable or corrupted.
• While the installation is still in progress, do not interrupt the operation or take the CD-ROM out of the
CD-ROM drive. Doing so may render it impossible to install the software thereafter.
98
Connecting the Net MD to your computer
After the software installation is completed, connect the Net MD to your computer.
Refer to the operating instructions of the Net MD as well.
1 Insert a recordable disc into the Net MD.
2 Make the power source and the dedicated USB cable connections with the Net
MD and the computer.
AC
power
adaptor
To the USB jack/
dedicated jack
To the USB
connecting
terminal
Net MD
devices*
Dedicated
USB cable
To the DC IN
jack
Computer
* If a cradle is supplied with your Net MD, connect the dedicated USB cable to the
USB cradle and place the Net MD onto the USB cradle.
3 Check the connections.
When the connections have been properly
made, “PCppMD”* appears in the display of
the Net MD.
*Depending on the device, “Net MD” may be
displayed.
Notes
• When using the Net MD connected to your computer, it is recommended that you run the recorder
from an AC outlet. If you use a battery to run the Net MD, be sure to use a new dry cell or a fully
charged rechargeable battery. We do not assure the results should there be a mis-operation, check-out
failure, or destruction of audio data caused by insufficient battery power.
• When using the Net MD with the cradle, place the cradle on a stable surface so that the dedicated USB
cable does not become detached.
99
Storing audio data to your computer
This section explains how to record and store audio data from an audio CD to the hard disk
drive of your computer.
The procedure in this section is used to record all tracks on an audio CD. To record only
specific tracks from a CD, or from other sound sources, see the online help for details
Note
The system may malfunction if your computer changes to system suspend or hibernation mode while
the software is playing, recording, or connecting to an external device or media* such as a Net MD.
∗ For this software, the word “MD” refers to the built-in MD slot on the computer, and “Device/
Media” to a Net MD that is externally connected over a USB cable.
Starting SonicStage
Do one of the following:
• Double click
([SonicStage] icon) on the computer.
• Select [Start] - [Programs]* - [SonicStage] - [SonicStage].
∗ [All Programs] in the case of Windows XP
SonicStage starts up and the main window appears.
100
Recording audio CDs to the hard disk drive
In SonicStage Ver.1.5, the hard disk drive is called the “Music Drive”. The Music Drive
manages all audio data stored by SonicStage.
1 Insert the audio CD that you want to record into the CD-ROM drive of your
computer.
The CD window appears in the display.
Note
When you record an audio CD from your CD-ROM drive for
the first time, the “CD Drive Optimization” dialog box
appears when you insert the audio CD. Clicking [Start]
initiates a check of the CD-ROM drive to verify that the CD-
ROM drive is able to perform the recording properly.
2 Click
.
The recording navigation window* appears in the
display.
∗The recording navigation window makes it easy to make a
recording. Simply by doing 1, 2 and 3 in the next step,
you can select the audio source in the left panel and the
recording destination in the right panel.
3 Select
(CD) for [1 Sources] and
(Music Drive) for [2 Targets],
then click 3
[Jump to Record Window].
The display changes to the recording window.
continued
101
4 Click
select the recording mode.
in the middle of the recording window and
When recording data in LP2 mode:
select ATRAC3 132kbps
When recording data in LP4 mode:
select ATRAC3 66kbps
Click here
5 If the list panel is not displayed, click
.
List panels appear under the recording window. The
contents of the audio CD appear in the left list panel.
6 Click
[Record All].
Recording starts.
Upon completion, recorded tracks appear in the right list panel.
To stop recording
Click
([Stop]).
To resume recording, click
. When recording is resumed, it starts from the beginning
of the track that was last stopped.
102
Labeling audio data
After recording has completed, you can label the audio data in the Music Drive. Once audio
data in the Music Drive is labeled, the label information will be transferred to a disc along
with the audio data, allowing you to view the data on your Net MD.
(Music Drive).
“All Playlists” appears and all the albums stored on the
Music Drive appear in the Music Drive window.
2 Double click the desired album name.
A list of the audio files in that album appears.
3 Click
in the lower right part of the display.
The editing panel appears in the display.
4 Select an item by clicking [Title], [Album], [Artist], or [Genre], and then
right-click and select [Rename].
You can also click [V] at [Album] or [Artist] to display a dropdown list, and then select
an item from the list.
5 When the track title is highlighted, enter the text data from the keyboard.
z
You can also import names from a database with the
([CD Info]) button for use in labeling tracks or
103
Transferring audio data from your computer to the
Net MD (Check-out)
Audio data stored on the Music Drive can be transferred to your Net MD. This process is
called “Check-out”. The number of times a track can be checked out is restricted in this
software for the protection of copyrights (page 122).
Playlist
Checking out audio files to the Net MD
This section explains how to check out all audio files in a playlist*.
∗ A playlist is a container that allows the stored audio files in the Music Drive to be classified by
genre, artist, etc.
1 Click
to display the recording navigation window.
2 Select
(Music Drive) for [1 Sources] and
(Device/Media) for [2
Targets], then click 3
([Jump to Record Window]).
The display changes to the recording window.
104
3 Click
in the middle of the display and select the
recording mode (page 102).
Standard transfer mode: Data are transferred in the format of the original files.
Maximum available transfer space: All data are transferred in LP4 mode.
SP transfer mode: All data are converted and transferred in normal stereo mode. Select
this mode if you listen to checked-out data on equipment that does not support
MDLP mode.
4 If the list panel is not displayed, click
.
A playlist appears in the display.
5 Confirm that the audio files you are about to check out are okay for checking
out.
The music notations beside the track number in the left
panel of the list represent the number of times the file
can be checked out (e.g.
out three more times). If
= the track can be checked
appears beside the track
number, the file cannot be checked out.
6 Click
[Check-Out All].
Checking out of the files starts.
All files in the playlist are checked out to the connected Net MD.
To cancel a check-out
Click
([Stop]).
105
Notes
• Once a check-out (or check-in) has started, do not disconnect the dedicated USB cable or power
source until the check-out operation has completed. These actions may damage the data or cause the
system to malfunction.
• Make sure not to bump the Net MD after check-out has started. If you do, the contents of the
recording may not be stored correctly.
• Due to the limitations of the MD system, you may not be able to record the full amount of remaining
recording time.
• Due to the limitations of the MD system, a maximum of about 1,700 characters can be stored for disc
name, group names and track names on the disc. Take note of this fact when checking out a large
number of tracks.
106
Listening to an MD
You can listen to an MD on the Net MD while it is connected to your computer. When
disconnected from your computer, the Net MD can be used as an ordinary MiniDisc
device.
Listening to an MD with the Net MD connected to the
computer
If you listen to an MD with the Net MD connected to the computer, be sure to listen with
the Net MD itself (connecting to the headphones/earphones, speakers, etc.). The MD sound
cannot be heard from headphones/earphones that are connected to the computer.
Listening to an MD with the Net MD disconnected from the
computer
Listen to the MD after disconnecting the dedicated USB cable from the computer and the
Net MD.
Notes
Generally, you cannot erase or divide/combine checked-out audio files. If you want to edit such files,
check them back in first. Checked-out files can be edited on some MD devices; however, erasing a track
will decrease the number of times the file can be checked out, and dividing or combining tracks will
107
Advanced operations
Using other functions!
Using the SonicStage online help
This manual explains only the basic operations of the SonicStage software. However, the
software has a host of other functions that allow you to carry out various operations, such
as importing audio files from the Internet, classifying and managing audio files, and
playing in various play modes. For information and details on the various menus and
operations, go to the online help.
To display online help
Click
(help) while the SonicStage
software is running.
z
You can display the online help by selecting the following:
[Start]–[Programs]*–[SonicStage]–[SonicStage Help]
∗ [All Programs] in the case of Windows XP.
108
Viewing online help
The Tabs
The right side frame
The left side frame
Let’s find out how to use the online help first. An explanation on the use of the online help
can also be found in the online help.
1 Double click [Overview] in the left-hand frame.
2 Click [About this Help file].
The explanation will appear in the right-hand frame.
3 Read the text.
Scroll the display if necessary.
Click underlined words to jump to their explanations.
Note
In the online help, “Device/Media’ is the
general term for external devices such as Net
MDs, Network Walkmans (i.e., portable IC
audio players or portable “Memory Stick”
audio players), and MusicClips.
Device/Media
109
Other information
Settings and Precautions
Settings according to OS
The settings and precautions will differ according to the operating system being used.
Check the items that apply to your system.
For Windows XP users
Restrictions when running the SonicStage software under Windows XP
• To install this software, you must log on with a user name with “Computer
Administrator”* as an attribute.
• You must log on with the user name “Administrators” or “Power Users” to use the
SonicStage software.
• Both edition of Windows XP (Home/Professional) can be used.
• The NTFS format of Windows XP Home Edition or Windows XP Professional (factory
installed) can be used only with the standard (factory) settings.
∗ To check whether the user name has the attribute of “Computer Administrator”
Go to [Start]- [Control Panel]-[User Account], and then check the user name displayed on the
window.
When using SonicStage under Windows XP
If you use the “System Restore” function in Windows “System Tools”, audio data managed
by SonicStage may become corrupted and rendered unplayable.
Before executing the system restoration procedure, you should first back up all audio files
and restore them after doing the system restoration procedure.
For details about backup procedures, refer to online help.
Note
Restoring backup data requires access to the Internet. If an audio file becomes unplayable after
restoring the system, an error dialog box may appear. If this occurs, do as instructed by the message.
110
For Windows Millennium Edition users
When using SonicStage under Windows Millennium Edition
If you use the “System Restore” function in Windows “System Tools”, audio data managed
by SonicStage may become corrupted and rendered unplayable.
Before executing the system restoration procedure, you should first back up all audio files
and restore them after doing the system restoration procedure.
For details about backup procedures, refer to online help.
Note
Restoring backup data requires access to the Internet. If an audio file becomes unplayable after
restoring the system, an error dialog box may appear. If this occurs, do as instructed by the message.
For Windows 2000 users
Restrictions when running the SonicStage software under Windows 2000
• You must log on as “Administrator” to install the SonicStage software.
• You must log on with the user name “Administrators” or “Power Users” to use the
SonicStage software.
• Of the Windows 2000 versions, SonicStage is supported only by Windows 2000
Professional.
• The NTFS format of Windows 2000 Professional (factory installed) can be used only
with the standard (factory) settings.
For Windows 98 Second Edition users
Importing MP3 files to the computer or playing WAV files on the computer
Microsoft Media Player version 7.0 or higher is required for importing MP3 files or
playing WAV files. Users of earlier versions can download the most resent version from the
Microsoft website (http://www.microsoft.com/).
111
For users with OpenMG Jukebox, SonicStage, or SonicStage
Premium installed on their computer
Note
Confirm whether any tracks have been checked out from your computer.
If tracks have been checked out from OpenMG Jukebox, an earlier version of SonicStage,
or SonicStage Premium, it may not be possible to check those tracks back in with
SonicStage Ver.1.5. It is recommended to check in the tracks before installing SonicStage
Ver.1.5.
Check the following contents before installing SonicStage Ver.1.5.
The installation items and procedure will vary depending on the software installed on your
computer.
Users with OpenMG Jukebox installed
Installed Version
What to do
Ver.1.0~2.1
Install SonicStage 1.5. OpenMG Jukebox Ver.1.0-2.1 is
automatically uninstalled and replaced.1)
Ver.2.2
OpenMG Jukebox Ver.2.2 and SonicStage Ver.1.5 can co-
exist in the computer.
If you install SonicStage Ver.1.5, then OpenMG Jukebox
Ver.2.2 will be automatically upgraded to the latest version.
1)
Audio files recorded with OpenMG Jukebox Ver.1.0-2.1 are automatically converted to SonicStage
Ver.1.5 files. For safety sake, it is recommended that you back up your audio data with the back-up
tool before doing the upgrade to SonicStage Ver.1.5.
Users with an earlier version of SonicStage installed
Installed Version
What to do
Ver.1.0~1.5
Install SonicStage Ver.1.5. The earlier version is
automatically uninstalled and replaced.1)
1)
Audio files recorded with SonicStage Ver.1.0-1.5 are automatically converted to SonicStage Ver.1.5
files. For safety sake, it is recommended that you back up your audio data with the back-up tool before
doing the upgrade to SonicStage Ver.1.5.
Users with a SonicStage Premium installed
Installed Version
What to do
SonicStage Premium
Install SonicStage Ver.1.5. SonicStage Ver.1.5 and
SonicStage Premium can co-exist in the computer.
112
Precautions on the co-existence of SonicStage Ver. 1.5 with OpenMG Jukebox
Ver.2.2 or SonicStage Premium
• Make sure the OpenMG Jukebox Ver.2.2 icon is not displayed in the task tray. If it is, the Net MD may
not be recognized by your computer.
• Audio data recorded on the computer are stored in a common file and used by both applications.
Therefore, if you delete an audio file (e.g., one album) in one application, it will be deleted in the other
software as well.
Precaution on using a computer on which OpenMG Jukebox Ver.1.0-2.1 or
SonicStage Ver.1.0-1.2 is installed
After installing SonicStage Ver.1.5, make sure you do not replace SonicStage Ver.1.5 with OpenMG
Jukebox Ver.1.0-2.1 or SonicStage Ver.1.0-1.2., as all audio data in the Music Drive may be lost. If you
begin the installation of OpenMG Jukebox Ver.1.0-2.1 or SonicStage Ver.1.0-1.2 by mistake, stop the
installation immediately.
Note on hard disk drive space
120 MB or more free space on the hard disk drive is required. If your computer does not
have enough space, the software will not be properly installed. The required free space
differs according to the version of your Windows OS, or the amount of audio files that you
handle.
Notes on system suspend/hibernation mode
• If the computer changes to system suspend/hibernation mode during the recording of a
CD or the checking in/out of a data file, the audio data may be lost or the computer may
not wake up properly. The computer suspend/hibernation function should therefore be
turned off.
• If you change the media while the computer is in system suspend/hibernation mode,
audio data may be lost after the computer wakes up.
• If the computer changes to system suspend/hibernation mode, the computer may not
recognize the Net MD when it wakes up. If this happens, disconnect the USB cable and
reconnect it again.
Backing up the audio data
Before doing any procedure that may affect the operating system itself (such as a system
recovery), you should back up all of your audio data with the [SonicStage backup tool]
from the [Start] - [Programs] - [SonicStage].
113
Uninstalling the SonicStage software
To uninstall the SonicStage software, follow the procedures below.
For Windows XP users
Log on with a user name with “Computer Administrator” as an attribute.
Refer to the operating instructions of your computer for details on logging on as an
administrator.
1 Click [Start]–[Control Panel].
The “Control Panel” window appears.
2 Double-click [Add/Remove Programs].
The “Add/Remove Programs” dialog box appears.
3 Click [Change or Remove Programs].
4 Click [SonicStage 1.5.XX] in the “Currently Installed Programs” list, and
then click [Change and Remove].
5 Click [OpenMG Secure Module 3.1]* in the “Currently Installed Programs”
list, and then click [Change and Remove].
Do as instructed by the message and restart the computer. When the computer restarts,
the uninstallation will be completed.
* If SonicStage Ver.1.5 is co-existing with OpenMG Jukebox Ver.2.2 or SonicStage Premium on your
computer, and you uninstall one or the other, make sure [OpenMG Secure Module 3.1] is not
uninstalled since it is commonly used with both software applications.
For Windows Millennium Edition/Windows 98 Second Edition
users
1 Click [Start]–[Settings]–[Control Panel].
The “Control Panel” window appears.
114
2 Double-click [Add/Remove Programs].
The Add/Remove Programs Properties window appears.
3 Click [SonicStage 1.5.XX] in the list of programs for automatic removal, and
then click [Add/Remove].
4 Click [OpenMG Secure Module 3.1]* in the list of programs for automatic
removal, and then click [Add/Remove].
Do as instructed by the message and restart the computer. When the computer restarts,
the uninstallation will be completed.
For Windows 2000 users
Log on as “Administrator”, and then follow the instructions below.
Refer to the operating instructions of your computer for details on logging on as an
administrator.
1 Click [Start]–[Settings]–[Control Panel].
The “Control Panel” window appears.
2 Double-click [Add/Remove Programs].
The “Add/Remove Programs” dialog box appears.
3 Click [Change or Remove Programs].
4 Click [SonicStage 1.5.XX] in the “Currently Installed Programs” list, and
then click [Change/Remove].
5 Click [OpenMG Secure Module 3.1]* in the “Currently Installed Programs”
list, and then click [Change/Remove].
Do as instructed by the message and restart the computer. When the computer restarts,
the uninstallation will be completed.
* If SonicStage Ver.1.5 is co-existing with OpenMG Jukebox Ver.2.2 or SonicStage Premium on your
computer, and you uninstall one or the other, make sure [OpenMG Secure Module 3.1] is not
uninstalled since it is commonly used with both software applications.
115
Troubleshooting
Please do the following steps if you encounter a problem while using the SonicStage
software. In case a message appears, it is recommended that you write it down.
A variety of information can also be found in the operating procedures and “Settings and
Step 2: Check the symptoms in the SonicStage 1.5 online help
Check “Troubleshooting” under “Additional information” in the online help.
Useful information may also be found in other sections in the online help.
Step 3: If the trouble cannot be solved after checking the above
references.
Check the following table and then consult your nearest Sony dealer.
116
Computer
• Manufacturer:
• Model:
• Type: Desktop type / Laptop type
Name of operating system:
RAM capacity:
Hard disk drive (containing SonicStage and audio data)
• Capacity of the drive:
• Free space:
Installed folder containing SonicStage (if other than the default folder)1)
• Location of the installed folder:
Version of the software (SonicStage Ver.1.5)2):
Error Message (if one appear):
If an externally connected CD-ROM drive is used
• Manufacturer:
• Model:
• Type: CD-ROM / CD-R/RW / DVD-ROM / Other (
)
• Type of connection to the computer: PC card / USB / IEEE1394 / Other (
)
If another device with USB connection is used
• Name of the device (or devices):
1)
If you do not specify the destination, the software is installed at C:\Program Files\Sony\SonicStage.
To check the SonicStage software version, go to [Menu] - [About SonicStage] in the SonicStage
window, or see the version information on the supplied CD-ROM.
2)
117
If your computer does not recognize the Net MD
• Is the Net MD connected correctly to your computer?
— If the Net MD is not firmly connected to the computer, the Net MD will not be
recognized by your computer.
— Reconnect the dedicated USB cable. If the computer still does not recognize the Net
MD, disconnect the Net MD, restart the computer, and connect the dedicated USB
cable again.
• Is an MD inserted in the Net MD?
Check if an MD is inserted in the Net MD.
• If your computer does not recognize your Net MD even when the Net MD is
connected and a disc is inserted, the Net MD driver may not be correctly
installed.
Go to the [USB Controller] in the Windows Device Manager window to verify that your
Net MD is correctly recognized.
A [!] mark in the Device Manager window indicates that your Net MD is not correctly
recognized. Reinstall the Net MD driver.
1 Click [Start]–[Settings]–[Control Panel].1)
2 Double click [System] in the control panel.2)
3 Click the [Hardware]3) tab, and then click [Device Manager].
The Device Manager window appears.
1)
In Windows XP, select [Start]–[Control Panel].
2)
In Windows XP, double click [System] if the control panel is in the “classic” format, or click
[Performance and Maintenance] and then [System] if the control panel is in the “category” format.
Depending on your system, the [Hardware] tab may not be provided. In this case, click the [Device
3)
Manager] tab to display the Device Manager window.
If the installation was not successful
• Be sure to close all Windows applications before you start the installation.
If you start the installation while other programs are running, a malfunction may occur.
This is especially true for programs that require large amounts of system resources, such
as virus-check software.
• Be sure not to connect the Net MD to your computer before you start the
installation.
If the dedicated USB cable is connected to your computer before the installation, the
installation cannot be done correctly. Connect the dedicated USB cable after the
installation completed.
• Make sure your computer has enough hard disk drive space.
120MB of free space or more on the hard disk drive is required. If your computer does
not have enough space, the installation may not be possible.
118
• If the installation seems to be stopped
It may take 30 minutes or more for the installation to complete, depending on your
computer or CD-ROM drive.
During the installation, watch out for the occurrence of any of the following problems.
Problem
Cause/Remedy
The installation appears to have Check for the appearance of an error message beneath
stopped before it has
completed.
the installation window.
t Press the [Tab] key while holding down the [Alt]
key. If an error message has appeared, press the [Enter]
key. The installation will resume. If there is no
message, the installation is still in progress. Wait a little
while longer.
The progress bar on the display The installation is progressing normally. Please wait.
is not moving. The access lamp
has not lit for a few minutes.
• If the installation is still unsuccessful after all that you have done.
— The installation can be done by copying all files to the hard disk as follows:
1 Create a new folder on the hard disc.
2 Insert the supplied CD-ROM (SonicStage Ver.1.5) into the CD-ROM drive.
3 When the installation window appears, click [Exit] to cancel the installation.
4 Right-click the start menu and start up Explorer.
5 Select [SS15E] on the CD-ROM drive, and then click [Edit] -[Select All].
6 Click [Edit]-[Copy to Folder] (or [Edit]-[Copy]) to copy all files to the folder that you
7 Remove the CD-ROM from the CD-ROM drive, open the folder that was copied to the
hard disk and double-click [setup.exe].
8 When the installation window appears, follow the displayed instructions to install
[SonicStage 1.5].
— The installation may be done by installing the software from [Start]-[Run].
119
Information and explanations
Net MD FAQ
This section introduces frequently asked questions and answers on the Net MD.
On the Net MD
What is a “Net MD”?
Net MD is a specification that allows audio data in a computer to be transferred to a
MiniDisc through a USB cable.
Till now, MiniDiscs could be used to record only analog sources (through a microphone or
analog input) or PCM sources such as CDs. Recording audio files on a computer was
impossible. However, thanks to SonicStage and other music management software based
recording of computer files to MDs.
1)
Copyright protection technology for managing audio data recorded on computers, etc.
Technology for verifying the copyright-protection status of audio data in check-out/check-in
2)
operations between a computer and a Net MD device.
File type for recording to an MD.
3)
How does the SonicStage software make using MDs more convenient?
• It allows you to record audio data from your computer to your MD.
• Editing operations are easily done using on-screen operations.
— Labeling: Allows use of keyboard for easy labeling of contents.
— Moving tracks or groups: Allows tracks or groups to be moved simply by dragging
and dropping. Track movements are easy to see.
— Group settings: Groups are easy to create or release.
These operations can be used to edit tracks on a disc in the Net MD. If you want to edit
the contents of an MD, connect the Net MD to your computer, and edit the tracks in the
SonicStage Device/Media window.
Can tracks recorded on the Net MD be checked in to a computer?
No, they cannot.
Audio data that was originally checked out from a computer can only be checked back into
the same computer. Tracks that are recorded on the Net MD using a microphone or through
an analog or digital connection cannot be transferred to the computer or copied.
Computer k MiniDisc : OK.
MiniDisc k Computer : OK only for tracks originally checked out from the computer.
120
On Editing
Can checked-out tracks be edited on the Net MD?
• Things you can do on the Net MD:
— Label contents.
— Assign or release groups
— Move tracks or groups.
• Things you cannot do on the Net MD:
— Add track marks (divide)/erase track marks (combine).
— Delete tracks, groups, or the entire disc contents.
121
On copyright protection
The OpenMG technology* allows you to enjoy digital music, while maintaining the
copyrights of its holders. OpenMG Jukebox encrypts audio files in OpenMG format and
stores them on the hard disk of your computer to prevent unauthorized distribution.
* The copyright protection technology of this software conforms to SDMI (Secure Digital Music
Initiative) specifications.
This software places some restrictions on recording and playback to protect copyrights.
You can check in audio files only to the same computer from which they were checked out.
They cannot be copied or checked in to other computers.
You can check-in audio files
only to the computer which
they were checked out.
Check-out can
be made for
three times.
You cannot copy or
move audio files to
another computer.
122
Restrictions on audio content
High-quality digital audio content is widely available through music distribution services
on the Internet. To protect the copyrights of its holders from unauthorized distribution,
some audio content is distributed with certain restrictions on recording and playback. For
example, the playback period or playback count for the data may be limited. In such cases,
checking out of the audio contents may not be possible.
Depending on the contents, some audio data that could be checked out are subject to
editing restrictions on the Net MD; e.g., audio contents cannot be erased or track marks
cannot be added or erased.
It is not possible to check in tracks other than those that were checked out from your
computer (for example, tracks recorded using a microphone or through analog or digital
connection).
Features by copyright protection by OpenMG
The SonicStage software features OpenMG, a copyright protection technology developed
by Sony to protect music copyrights. OpenMG uses high-level cryptographic technology to
protect music contents with computers.
Users should be aware of the restrictions described below.
• Music recorded on the hard disk using the SonicStage software cannot be played when
copied to other computers.
• Installation of the same SonicStage software to other computers is not permitted.
• Usage Rules
If Usage Rules are included in the music by way of the copyright holder or the distributor,
operation will be restricted to use permitted by the Usage Rule. For music, such as
compact discs, that does not contain a Usage Rule, the Default Usage Rule of SDMI will
apply. This Default Usage Rule states that one file can be checked out up to three times
only.
• On music contents that are not compatible with the SonicStage software
Under the supervision of SDMI, this software prohibits recording of music with a copy
prohibition signal.
• Upgrading SonicStage software
This software was developed in accordance with the current arrangement between Sony
and SDMI. If this arrangement is modified in the future, some of the software functions
may become unavailable. Sony may offer an upgrade kit in this case at additional user
expense.
123
Glossary
ATRAC3
ATRAC3, which stands for Adaptive Transform Acoustic Coding3, is audio compression
technology that satisfies the demand for high sound quality and high compression rates.
The ATRAC3 compression rate is approximately 10 times higher than that of the Audio
CD, resulting an increased data capacity for the media.
“Check-In /Check-Out”
Check-out is to transfer music files from a personal computer to an external device/media
(such as a Network Walkman). Returning checked-out music files to the same computer is
to check in. (You cannot move checked-out music files to another computer.)
You can check out a music file, check it back in, and then check it out again an infinite
number of times. The SDMI rules provide that up to four copies of a music file can be
checked out at one time. OpenMG employs a method whereby three copies of a song can
be checked out simultaneously, while the fourth copy is maintained as a master on your PC.
Electronic Music Distribution (EMD) service
EMD is a website that distributes music files which are available for purchase.
MP3
MP3, which stands for MPEG-1 Audio Layer3, is a standard for audio file compression
determined by the Motion Picture Experts Group, an ISO (International Organization for
Standardization) working group. It enables compression of audio files to about 1/10 of the
data size of a standard compact disc. Since the MP3 encoding algorithm is disclosed, there
are various encoders/decoders that are compliant with this standard, including freeware that
is available for no charge. The MP3 standard is therefore widely used in the computer field.
Music Drive
Music Drive is a music database for managing audio data on a computer. In Music Drive,
audio files can be managed along with such information as artist names, track names, and
CD jacket images, or can be combined and categorized in different playlists.
OpenMG
Copyright protection technology for the import and management of musical content from
distribution services or CDs. By using software that are compliant with OpenMG, audio
contents can be encrypted before storage on a hard disk drive to allow playback of those
audio files on that computer. OpenMG also prevents the unauthorized distribution of the
contents via the Internet or other networks.
Playlist
A playlist is like a container that can be used to hold and categorize files stored in Music
Drive. For example, by making a “jazz” playlist and then putting your favorite jazz tracks
into the playlist, you can play all of the tracks repeatedly or check them all out at the same
time.
124
Recording mode (Bit rate)
This is a measure of data volume per second. The rate is expressed in bps (bits per second).
In SonicStage, the bit rate can be selected for recording an audio CD or converting MP3
and WAV format audio files into ATRAC3 format from among three rates: 132 kbps, 105
kbps or 66 kbps. In the case of 105 kbps, 105,000 bits of information is processed per
second. If the bit rate is large, that means a large amount of information is used to play the
music. Thus, 105 kbps data produces better sound quality than 66 kbps data, and 132 kbps
data provides better sound quality than 105 kbps data. However, audio files in formats such
as MP3 have different encoding methods, and so the sound quality is not determined by the
bit rate alone.
SDMI
SDMI, which stands for Secure Digital Music Initiative, is a forum that consists of over
130 companies in the fields of recorded audio content, computers, and consumer
electronics. It is dedicated to the development of integrated copyright protection
technology that can be used worldwide.
SDMI is working to create a framework for preventing the improper usage of audio files
and to promote legal music distribution services. The copyright protection technology
OpenMG is based on the SDMI standard.
Windows Media Audio
This is an audio compression technology that includes the management system called
“Windows Media Rights Manager”.
Windows Media Technology
This is a technology that includes a contents management system called Windows Media
Rights Manager which encrypts contents and distributes music contents along with their
conditions for usage, distribution, etc. Audio files supporting Windows Media
Technologies (WMT) downloaded via EMD* can be imported into and managed by
OpenMG Jukebox.
* EMD may not be available in certain areas of the world.
125
Index
Numerics
6-Band Equalizer 35
A
D
delete (software) 114
Digital Pitch Control 36
Digital Sound Preset 34
Divide
Accessories
optional 75
supplied 11
directly 43
rehearsal 43
Auto Time Mark 30
AVLS 64
DSP TYPE-S 90
E
EMD services 124
Erasing
B
back up 113
Backlight 65
Battery
a whole disc 45
groups 52
tracks 45
battery life 18
built-in battery 16
dry battery 17
BEEP 58
G
G-PROTECTION 91
Group
Bookmark
erasing 52
moving 52
add 33
play 33
C
play 47
recording 46
releasing 50
setting 49
CD-ROM 95
Charging 16
Checking
skip 47
Group Program Play 48
H
clock 58
hard disk
playing position 32
storing 101
HOLD 12
Cleaning 74
Clock 58
I
Installing 97
L
Combining tracks 44
Connecting 99
analog 28
digital 20
when charging 16
Connection 38
Labeling
a disc 40
tracks 40
labeling 103
Contrast 65
copyright protection 122
126
M
S
Manual recording 31
MDLP 27
Melody Timer 36
Menus 70
SDMI 125
Move
start (software) 100
Synchro-recording 26
System environment 95
System limitations 95
groups 51
tracks 42
MP3 124
T
N
Track mark
Name
Add (Divide) 43
Erase (Combine) 44
Transferring
a disc 39
groups 50
tracks 39
to the computer 100
to the Net MD 104
Net MD driver 118
U
O
Uninstalling
Online help 108
Windows 2000 115
Windows 98 Second Edition 114
Windows Millennium Edition 114
Windows XP 114
OpenMG 124
P
USB
Personal Disc Memory 68
Play mode
cable 11
cradle 16
V
groups 47
tracks 32
Virtual Surround 34
W
Program Play 34
Windows 2000 115
Windows 98 Second Edition 114
Windows Millennium Edition 114
Windows XP 114
WMA 125
Q
Quick mode 63
R
Recording
adding track marks 30
analog 28
WMT 125
digital 19
from microphone 29
level 31
MDLP mode 27
without overwriting tracks 59
Recording navigation window 101
Relabeling 41
127
Printed in Japan
|