4-234-822-11 (2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. _______________
Serial No. _______________
CMT-EP40
CMT-EP30
CMT-E301
© 2001 Sony Corporation
Table of Contents
Parts Identification
Tape
Loading a tape ..................................... 12
Main unit ............................................... 4
Remote Control ..................................... 5
Playing a tape ...................................... 12
Recording to a tape
— CD Synchro Recording/Recording
Manually ....................................... 13
Getting Started
Hooking up the system .......................... 6
Inserting two size AAA (R03) batteries
into the remote ................................ 7
Sound Adjustment
Adjusting the sound ............................. 14
Selecting the audio emphasis .............. 14
Setting the time...................................... 7
CD
Other features
Loading the CD ..................................... 8
Falling asleep to music
Playing the CD
— Sleep Timer .............................. 15
— Normal Play/Shuffle Play/Repeat
Play.................................................. 8
Waking up to music
— Daily Timer .............................. 15
Programing the CD tracks
— Program Play .............................. 9
Using the CD display ............................ 9
Additional information
Precautions .......................................... 16
Troubleshooting................................... 17
Specifications ...................................... 19
Tuner
Presetting radio stations....................... 10
Listening to the radio
–– Preset Tuning ........................... 10
* For European model only
Using the Radio Data System
(RDS)* .......................................... 11
3
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
Main unit
1
2
3 4 5 6
7
8
9
q;
wk
wj
wh
wg
wf
wd
qa
qs
qd
ws
wa
w;
ql qk qj qh qg qf
Cassette compartment qd (12)
CD 4 (8, 9, 13, 15)
Display Window 5 (9, 18)
ENTER/PGM w; (7, 8, 9, 10, 12,
15)
Remote sensor wk
REPEAT wj (8)
SHUFFLE wa (8)
TAPE 3 (12)
TIMER indicator 2 (15)
TUNER 6 (10, 13, 15)
TUNER DSPL (CMT-EP40 only)
wh (11)
TUNER MEM w; (10)
TUNING + wd (10, 11)
TUNING – wf (10, 11)
VOLUME control qa (15)
BUTTON DESCRIPTIONS
@/1 (power) 1 (6, 10)
CD
. m (go back) wf (8, 9)
M > (go forward) wd (8, 9)
u (play/pause) wg (8, 9)
Z PUSH OPEN/CLOSE 7 (8)
x (stop) wh (8, 9)
ISS 0 (13)
MEGA BASS 8 (14)
MONO STEREO 0 (11)
MUSIC MENU 9 (14)
PHONES jack ws
PRESET +/– qs (10, 11)
RDS (CMT-EP40 only) wg (11,
12)
TAPE
M (fast forward) qh (12)
X (pause) qf (12, 13)
N (play) qk (12, 15)
z (recording) ql (13)
m (rewind) qj (12)
xZ (stop/eject) qg (12, 13)
REMAIN 4 (9)
4
Remote Control
1 2 34
w;
ql
qk
qj
qh
qg
qf
qd
5
6
7
8
9
q;
qa
qs
CD/REMAIN 3 (8, 9, 13, 15)
CLOCK/TIMER/SLEEP SET qf
(7, 15)
MEGA BASS 2 (14)
MUSIC MENU w; (14)
PRESET +/– qj (10, 11)
RDS (CMT-EP40 only) qh (11,
12)
BUTTON DESCRIPTIONS
M (fast forward) > (go
forward) 0 (8, 9)
. (go back) m (rewind) qa
(8, 9)
u (play/pause) 8 (8, 9)
`/1 (power) 1 (6, 10)
x (stop) 9 (8, 9)
REPEAT qs (8)
SHUFFLE 7 (8)
TAPE ql (12)
TIMER ON/OFF qd (15)
TUNER/BAND 5 (10, 13, 15)
TUNER DSPL (CMT-EP40 only)
qg (11)
TUNER MEM/ENTER/PGM 6
(7, 8, 9, 10, 11, 15)
TUNING/CLOCK/TIMER +/–
qk (7, 10, 11, 15)
VOLUME +/– 4 (15)
5
Getting Started
Hooking up the system
Do the following procedure 1 to 2 to hook up your system using the supplied cords and
accessories.
FM antenna
1
2
Front speaker (Right)
Front speaker (Left)
1 Connect the front speakers.
Connect the speaker cords to the SPEAKER
terminals as shown below.
2 Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
SPEAKER
(IMPED
ANCE USE 4
Ω
)
Insert only the
To turn on the system, press [/ 1 (power).
stripped portion.
Red (3)
L
R
Black (#)
6
To attach the front speaker
pads
Setting the time
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
1 Turn on the system.
2 Press CLOCK/TIMER/SLEEP SET on
the remote.
The clock indication appears.
3 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the time.
4 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
The clock starts working.
Tip
If you made a mistake, perform from step 2.
To change the preset time
Perform from step 2.
Inserting two size AAA
(R03) batteries into the
remote
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
7
CD
2 Press SHUFFLE or ENTER/PGM
(TUNER MEM/ENTER/PGM on the
remote) repeatedly until the mode you
want appears in the display.
Loading the CD
1 Press Z PUSH OPEN/CLOSE down to
Select
To play
open the lid of the CD compartment.
No display
SHUFFLE
The CD in original order.
2 Place a CD with the label side up on the
The tracks on the CD in random
order.
compartment.
PROGRAM The tracks on the CD in the order
you want them to be played. (see
“Programing the CD tracks” on
page 9.)
When you play a CD
single (8 cm CD),
place it on the inner
circle of the
compartment.
3 Press u.
Other Operations
3 Press Z PUSH OPEN/CLOSE down to
To
Do this
close the lid of the CD compartment.
Stop playback
Pause
Press x.
Press u.
Press again to resume play.
Playing the CD
Select a track
Press M > (to go forward) or
— Normal Play/Shuffle Play/Repeat
. m (to go back).
Play
Find a point
in a track
During play, press and hold M
> (to go forward) or . m
(to go back). Release it when you
find the desired point.
This system lets you play the CD in different
play modes.
Play repeatedly
(Repeat Play)
Press REPEAT during play until
“REPEAT” or “REPEAT 1”
appears.
Playing time
REPEAT: For all the tracks on the
CD.
REPEAT 1: For a single track only.
To cancel playing repeatedly, press
REPEAT until “REPEAT” or
“REPEAT 1” disappears.
Remove the CD
Press Z PUSH OPEN/CLOSE.
Track number
1 Press CD (CD/REMAIN on the remote).
8
To
Do this
Programing the CD tracks
Check the total Press ENTER/PGM (TUNER
number of
programed
tracks
MEM/ENTER/PGM on the remote)
repeatedly in stop mode. Each time
you press the button, the selected
track number and the programed
step number appear in the display
in turn.
— Program Play
You can make a program of up to 28 tracks in
the order you want them to be played.
1 Press CD (CD/REMAIN on the remote),
Cancel Program Press x twice until “PROGRAM”
Play
then place a CD.
disappears from the display. The
program you made will be erased.
2 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote) repeatedly
until “00 PR.01” appears in the display.
Tip
3 Press . m or M > until the
The program you made remains after Program Play
finishes. When Program Play remains in the system’s
memory, “PROGRAM” flashes. To play the same
program again, press CD (CD/REMAIN on the
remote) and ENTER/PGM (TUNER MEM/ENTER/
PGM on the remote), then press u.
desired track appears in the display.
Programed step number
Using the CD display
Press REMAIN (CD/REMAIN on the
remote) repeatedly.
The display changes as follows:
Selected track number
(including selected track)
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current CD t
4 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
Elapsed playing time on the current track t ...
The track is programed. The next program
step number appears, and “PROGRAM”
flashes.
5 To program additional tracks, repeat
steps 3 to 4.
6 Press u.
Program Play starts.
9
Tuner
To tune in a station with a weak
signal
Press TUNING (TUNING/CLOCK/TIMER on
the remote) + or – repeatedly in step 2 to tune
in the station manually.
Presetting radio stations
You can preset up to 24 stations for FM and
AM.
To set another station to an existing
preset number
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select FM or AM.
Start over from step 1. After step 3, press
PRESET + or – repeatedly to select the preset
number where you want to store the other
station and the press ENTER/PGM (TUNER
MEM/ENTER/PGM on the remote).
2 Press and hold TUNING (TUNING/
CLOCK/TIMER on the remote) + or –
until the frequency indication starts to
change, then release it.
Scanning stops automatically when the
system tunes in a station. “STEREO” (for a
stereo program) appears.
You can preset a new station in the selected
preset number.
If it doesn’t stop automatically, press
TUNING (TUNING/CLOCK/TIMER on
the remote) + or – repeatedly to tune in a
station manually.
To change the AM tuning interval
(except for the European and Middle
Eastern models)
Disconnect the power cord from the wall outlet
first, and then set the AM FREQ STEP switch
at the rear to 9 kHz or 10 kHz.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
3 Press TUNER MEM (TUNER MEM/
ENTER/PGM on the remote).
A preset number appears in the display.
The stations are stored from preset number
1.
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner’s memory
first.
Press PRESET + or – repeatedly to tune in
the desired preset station.
The preset number appears in the display for a
few seconds.
Preset number
4 Press PRESET + or – until the preset
number you want for the station
flashes.
To
Do this
Turn off the radio Press ?/1.
5 Press ENTER/PGM (TUNER MEM/
To listen to non-preset radio stations
ENTER/PGM on the remote).
Use manual or automatic tuning. For manual
tuning, press TUNER (TUNER/BAND on the
remote) repeatedly to select FM or AM and
then press TUNING (TUNING/CLOCK/
TIMER on the remote) + or – repeatedly.
The station is stored.
6 Repeat steps 2 to 5 to store other
stations.
For automatic tuning, press and hold TUNING
(TUNING/CLOCK/TIMER on the remote) +
or –.
10
Tips
Locating a station by
program type (PTY)
You can locate a station you want by selecting
a program type. The system tunes in the type of
programs currently being broadcast from the
RDS stations stored in the tuner’s preset
memory.
• When an FM program is noisy, set MONO
STEREO to MONO so that “MONO” appears in
the display. There will be no stereo effect, but the
reception will improve.
• To improve broadcast reception, adjust the antenna
(for FM) or reorient the main unit itself (for AM).
• While listening to the preset radio stations, you can
switch the display between the preset number and
the frequency by pressing TUNER DSPL (CMT-
EP40 only).
The types of programs include NEWS,
AFFAIRS (current news), INFO, SPORT,
EDUCATE (education programs), DRAMA,
CULTURE, SCIENCE, VARIETY (interviews,
games and comedy), POP, ROCK, LIGHT M,
CLASSICS, OTHER M, and NO TYPE (any
programs not defined above).
Using the Radio Data
System (RDS)
(CMT-EP40, European model only)
1 Press RDS while listening to the radio.
What is the Radio Data System?
2 Press PRESET + or – repeatedly to
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only on FM stations.*
select the program type you want.
3 Press and hold TUNING (TUNING/
CLOCK/TIMER on the remote) + or –.
When the tuner receives a program, “PTY”
flashes.
Note
When the program type you select is not currently
being broadcast, the system tunes back in the FM
program that was tuned before you pressed RDS.
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal strength is weak.
To cancel PTY
Press TUNER DSPL until “PTY” disappears
from the display.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
continued
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, “RDS” appears in the display.
To check the RDS information
Each time you press RDS, the display changes
as follows:
Station name* t RDS TEXT* t Program
type* t Preset number t Frequency t
Station name* t ...
* If the RDS broadcast is not received, the station
name, RDS TEXT and program type may not
appear in the display.
11
Tape
Using the Radio Data System (RDS)
(continued)
Loading a tape
Listening to a traffic
information
When the tuner receives traffic information
signal, “TRAFFIC INFO” will flash in the
display.
1 Press TAPE.
2 Press xZ.
3 Insert a tape in deck with the side you
want to play/record facing forward.
1 Press RDS repeatedly until “INFO OFF”
or “INFO ON” appears while listening to
an FM program.
Insert with the side
you want to play/
record facing forward.
2 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote) to set
“INFO ON”.
Setting the time to the
broadcast
You can set the time to the clock information
received.
Playing a tape
You can use TYPE I (normal) tape.
1 Press RDS repeatedly until “SYNC
OFF” or “SYNC ON” appears while
listening to an FM program.
1 Load a recorded tape.
2 Press TAPE.
3 Press N.
2 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote) to set
“SYNC ON”.
To
Press
Stop play
Pause
xZ
X
Press again to resume play.
Fast-forward or rewind
Remove the cassette
m or M
xZ
12
Recording to a tape
–– CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
Steps
Recording from a CD
Recording from the radio
(CD Synchro Recording)
1
2
Load a blank tape.
Press CD (CD/REMAIN on the remote).
Press TUNER (TUNER/BAND on the
remote).
3
4
Load the CD you want to record.
Tune in the station you want to record.
Press z.
Press X and z.
The deck stands by for recording.
Press X again.
To stop recording
Press xZ.
Tips
• For recording from a CD to a tape, you can press
. m or M > to select tracks before step
4.
• When an AM program is noisy, set ISS to select the
position that decreases the noise the most.
13
Sound Adjustment
Adjusting the sound
Press MEGA BASS.
“MEGA BASS” appears in the display. To
return to normal sound, press the button again.
Selecting the audio
emphasis
Selecting the preset effect from the
music menu
Press MUSIC MENU repeatedly to select the
preset effect you desire.
Each time you press the button, the display
changes as follows:
ROCK t POP t JAZZ t No display t
ROCK t ...
14
Other features
3 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “ON 0:00”
appears in the display.
Falling asleep to music
— Sleep Timer
4 Set the time to start playback using
TUNING/CLOCK/TIMER + or – on the
remote.
You can set the system to turn off after certain
amount of time, so that you can fall asleep to
music.
5 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
1 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “SLEEP
OFF” appears in the display.
6 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “OFF 0:00”
appears in the display.
2 Press TUNING/CLOCK/TIMER + or – on
the remote to select the minutes until
the player goes off automatically.
7 Set the time to stop playback using
TUNING/CLOCK/TIMER + or – on the
remote.
Every time you press the button, the minute
display (the turn-off time) changes as
follows:
8 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
90 y 80 y 70 y … y 10 y OFF
9 Press CD (CD/REMAIN on the remote)
or TUNER (TUNER/BAND on the
remote) depending on the sound
source you want to play.
3 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
10Turn off the power and press TIMER
To
Do this
ON/OFF on the remote.
Change the
time to turn off
Start over from step 1.
The TIMER indicator lights up.
Cancel the Sleep
Timer function
Start over from step 1 and select
“OFF” on step 2.
To
Do this
Check the setting
Press CLOCK/TIMER/
SLEEP SET on the remote
repeatedly.
Waking up to music
— Daily Timer
Change the setting
Start over from step 1.
To cancel the timer
operation
Press TIMER ON/OFF on
the remote.
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see page 7).
1 Prepare the sound source you want to
play.
• CD: Load a CD.
• Radio: Tune in the preset station you
want (see page 10).
2 Adjust the volume.
15
Additional information
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not
operate properly. Remove the CD and leave the
system turned on for about an hour until the
moisture evaporates.
Precautions
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
• When you move the system, take out any discs.
On safety
If you have any questions or problems concerning
your stereo system, please consult your nearest Sony
dealer.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents.
• Do not expose the CD to direct sunlight or heat
sources.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this system. Attempting to
do so may damage the system. Do not use such
discs.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have the
component checked by qualified personnel before
operating it any further.
• The AC power cord must be changed only at a
qualified service shop.
On placement
Note on CD-R/CD-RW playback
• Place the unit in a location with adequate
ventilation to prevent heat build-up the unit.
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is;
— Extremely hot or cold
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt., recording
condition or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording cannot be played back.
— Dusty or dirty
— Very humid
— Vibrating
— Subject to direct sunlight.
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
On heat buildup
– Although the unit heats up during operation, this is
not malfunction
– Place the unit in a location with adequate
ventilation to prevent heat build-up in the unit.
If you continuously use this unit at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.
16
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Troubleshooting
If you have any problem using this system, use
the following check list.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Break off the
cassette tab of
side A
Should any problem persist, consult your
nearest Sony dealer.
General
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
The clock setting/radio presetting/timer is
canceled.
• The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
— “Setting the time” on page 7
— “Presetting radio stations” on page 10
If you have set the timer, also redo “Waking up
to music” on page 15.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
There is no sound.
• Turn VOLUME clockwise and hold.
• The headphones are connected.
• Insert only the stripped portion of the speaker
cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The clock indication does not show the correct
time.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
• A power interruption occurred. Set the clock and
timer settings again.
The timer does not function.
• Set the clock correctly.
• When you used the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
continued
17
Troubleshooting (continued)
Tape Deck
The tape does not record.
• No tape in the cassette compartment.
• The tab has been removed from the cassette.
• The tape has reeled to the end.
The remote does not function.
• There is an obstacle between the remote and the
system.
• The remote is not pointing in the direction of the
system’s sensor.
The tape does not record nor play or there is a
decrease in sound level.
• The batteries have run down. Replace the
batteries.
• The heads are dirty. Clean them (see “Cleaning
the tape heads” on page 17).
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 17).
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
The tape does not erase completely.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 17).
Speakers
There is excessive wow or flutter, or the sound
drops out.
Sound comes from one channel or unbalanced
left and right volume.
• The capstans or pinch rollers are dirty. Clean
them (see “Cleaning the tape heads” on page 17).
• Check the speaker connection and speaker
placement.
Noise increases or the high frequencies are
erased.
Sound lacks bass.
• Check that the speaker’s + and – terminals are
connected correctly.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 17).
CD Player
Tuner
The CD compartment does not close.
• The CD is not placed properly.
Noise is heard.
• For FM, move the antenna to reduce the noise.
The CD will not play.
For AM, reorient the main unit itself to reduce
the noise.
• The CD is not lying flat in the CD compartment.
• The CD is dirty.
• The CD is inserted label side down.
A stereo FM program cannot be received in
stereo.
• Moisture condensation has built up. Remove the
CD and leave the system turned on for about an
hour until the moisture evaporates.
• Set MONO STEREO so that “STEREO”
appears.
Messages
The following message may appear in the
display during operations.
NO DISC
• There is no disc on the CD compartment.
18
Tape player section
Specifications
Recording system
4-track 2-channel stereo
Frequency response
50 - 13 000 Hz (±3 dB),
using Sony TYPE I
cassette
Amplifier section
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Tuner section
FM stereo, FM/AM superheterodyne tuner
with 4 Ω loads both channels driven, from 120
- 10,000 Hz; rates 5 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
FM tuner section
Tuning range
87.5 - 108.0 MHz
FM lead antenna
10.7 MHz
Antenna
Intermediate frequency
AM tuner section
Tuning range
Pan-American model:
Canadian model:
Continuous RMS power output (reference)
5 + 5 W
530 - 1 710 kHz
(with the interval set at
10 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
(4 Ω at 1 kHz, 10% THD)
European model:
DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
European model:
Other models:
531 -1 602 kHz
(with the interval set at
9 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
Continuous RMS power output (reference)
5 + 5 W
(4 Ω at 1 kHz, 10% THD)
Music power output (reference)
13 + 13 W
530 - 1 710 kHz
(with the interval set at
10 kHz)
Built-in ferrite bar antenna
450 kHz
Other model:
The following measured at AC 230 V, 50/60 Hz
DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
Antenna
Intermediate frequency
Continuous RMS power output (reference)
5 + 5 W
Speaker
Speaker system
Speaker units
(4 Ω at 1 kHz, 10% THD)
Bass-reflex type
Full range 10 cm, cone
type
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
Accepts headphones of
8 Ω or more
Nominal impedance
Dimensions (w/h/d)
Mass
4 Ω
Accepts impedance of 4 to
16 Ω
Approx. 145 × 238 × 171 mm
Approx. 1.4 skg net per
speaker
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ=780 nm)
continued
Emission duration:
continuous
Frequency response
20 Hz - 20 kHz (±0.5 dB)
19
Specifications (continued)
General
Power requirements
North American model: 120 V AC, 60 Hz
European model:
Australian model:
Mexican model:
Argentine model:
Taiwan model:
Other models:
230 V AC, 50/60 Hz
230 V AC, 50/60 Hz
120 V AC, 60 Hz
220 V AC, 50/60 Hz
110 V AC, 60 Hz
230 V AC, 50/60 Hz
Power consumption
U.S.A. model:
Canadian model:
European model:
25 W
25 W
30 W
0.9 W (in the standby
mode)
30 W
Other models:
Dimensions (w/h/d):
Mass:
Approx. 145 × 238 × 238 mm
Approx. 2.8 kg
Supplied accessories:
Remote Commander (1)
Batteries (2)
Front speaker pads (8)
Design and specifications are subject to change
without notice.
Printed in China
Sony Corporation
|