6
Wake-Up Light
KH 2600
Wake-Up Light
Operating instructions
KOMPERNASS GMBH
BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH2600-09/10-V4
Index
GB
IE
Introduction . . . . . . . . . . . . . .2
Handling and operation . . .14
Information for these operating
instructions . . . . . . . . . . . . . . . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . 2
Proper use. . . . . . . . . . . . . . . . . . . . . 2
Warnings . . . . . . . . . . . . . . . . . . . . . 3
Switching On and Off . . . . . . . . . .14
Setting the time. . . . . . . . . . . . . . . .14
Adjusting the volume . . . . . . . . . . .15
Radio operation . . . . . . . . . . . . . . .15
Playback music from an iPod/iPhone 17
Playback of external audio devices19
Playback of nature sounds . . . . . .19
Mood lighting. . . . . . . . . . . . . . . . .19
Reading lamp . . . . . . . . . . . . . . . . .20
Alarm Function . . . . . . . . . . . . . . . .21
Safety . . . . . . . . . . . . . . . . . . .4
Basic Safety Instructions . . . . . . . . . . 4
Danger from electric shock. . . . . . . . 5
Danger of hearing damage . . . . . . . 5
Interaction with batteries . . . . . . . . . 6
Cleaning . . . . . . . . . . . . . . . .25
General description . . . . . . . .7
Safety instructions. . . . . . . . . . . . . .25
Cleaning the housing . . . . . . . . . . .25
Device summary. . . . . . . . . . . . . . . . 7
Remote control . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . 9
Storage/Disposal . . . . . . . . .25
Storage. . . . . . . . . . . . . . . . . . . . . .25
Disposal of the device . . . . . . . . . .25
Disposing of the batteries. . . . . . . .25
Setting up and connecting .10
Safety instructions. . . . . . . . . . . . . .10
Package contents and
transportation inspection . . . . . . . .10
Troubleshooting . . . . . . . . . .26
Unpacking . . . . . . . . . . . . . . . . . . .10
Disposal of the packaging . . . . . . .11
Requirements for the set-up location11
Electrical connections . . . . . . . . . . .12
Inserting back-up batteries . . . . . . .12
Activating the remote control battery 13
Changing the remote control battery 13
Providing mains power . . . . . . . . . .13
VHF wire antenna . . . . . . . . . . . . .13
Connecting the headphones . . . . .13
Safety instructions. . . . . . . . . . . . . .26
Malfunction causes and remedies .26
Appendix . . . . . . . . . . . . . . .27
Information regarding the
EC conformity declaration . . . . . . .27
Technical data . . . . . . . . . . . . . . . .28
Warranty . . . . . . . . . . . . . . . . . . . .29
Service . . . . . . . . . . . . . . . . . . . . . .29
Importer . . . . . . . . . . . . . . . . . . . . .29
KH 2600
1
Introduction
Introduction
GB
IE
Information for these operating instructions
These operating instructions are a component of the KH 2600 Wake-Up Light
(henceforth designated as the device) and they supply you with important
information about the intended use, safety and connection as well as operation
of the device .
The operating instructions must be constantly kept available close to the device.
They are to be read and applied by everyone assigned to operate and trouble-
shoot the device.
Keep these operating instructions and hand them over with the device to any
future owners.
Copyright
This documentation is copyright protected.
Any copying or reproduction, including extracts, as well as the reproduction of
images, also in an altered state, is not permitted without express written permission
from the manufacturer.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are brand
names of Apple Inc., registered in the USA and other countries.
Proper use
This device is intended only for reception of VHF radio programmes, for the con-
nection of external devices (i.e. MP3 players) and iPod/iPhone and for alarms
by means of audible signals, nature sounds, radio or music from an iPod/iPhone,
in enclosed spaces. This device is not intended for any other use or for uses
beyond those mentioned.
WARNING
Danger from unintended use!
Danger can come from the device if used for unintended purposes and/or
other types of use.
► Use the device exclusively for intended purposes.
► Observe the procedures described in these operating instructions.
Claims of any kind resulting from damage caused by improper use, incompetent
repairs, unauthorized modifications or the use of non-approved spare parts will
not be acknowledged.
The operator alone bears liability.
KH 2600
2
Introduction
Warnings
GB
IE
In the current operating instructions the following warnings are used:
DANGER
A warning at this danger level indicates a threatening dangerous
situation.
If the dangerous situation is not avoided, it could result in death or serious
injury.
► Follow the instructions given in this warning notice to avoid the risks of
death or serious injury to people.
WARNING
A warning of this danger level signifies a possible dangerous
situation.
If the dangerous situation is not avoided it can lead to injuries.
► The directives in this warning are there to avoid personal injuries.
IMPORTANT
A warning of this danger level signifies possible property
damage.
If the situation is not avoided it can lead to property damage.
► The directives in this warning are there to avoid property damage.
NOTICE
► A notice signifies additional information that assists in the handling of the
device.
KH 2600
3
Safety
Safety
GB
IE
In this chapter you receive important safety information regarding handling of the
device.
This device complies with the statutory safety regulations. Incorrect usage can,
however, lead to personal injury and property damage.
Basic Safety Instructions
For safe handling of the device observe the following safety information:
■ Before use check the device for visible external damage. Do not put into
operation a device that is damaged or has been dropped.
■ Never use the device if the lamp housing is damaged, broken or missing.
■ Damaged cables or connections should be replaced by authorized qualified
persons or by the customer service department.
■ Persons who, due to their physical, intellectual or motor abilities, are incapable
of operating the device safely may only use the device under supervision or
direction from a responsible person.
■ Only permit children to use the device under supervision.
■ Repairs should only be carried out by authorized specialist companies or by
the customer service department. Incompetent repairs can result in significant
risks for the user. In addition warranty claims become void.
■ A repair to the device during the warranty period may only be carried out
by a customer service department authorized by the manufacturer otherwise
no additional warranty claims can be considered for subsequent damages.
■ Defective components may only be replaced with original replacement parts.
Only by using original replacement parts can you guarantee that the safety
requirements are complied with.
■ Protect the device from moisture and liquid penetration. Never submerge the
device in water, never locate the device in the close vicinity of water and
never place any objects filled with liquids (such as vases) on the device.
KH 2600
4
Safety
■ Do not operate the device close to open flames (e.g. candles).
■ Avoid direct sunlight.
GB
IE
■ Do not use the device when the room temperature is below 10° C or above
35° C.
■ If you have previously suffered from severe depression or are suffering from
such at present, consult your doctor before you use the device.
■ Always pull on the power plug when disconnecting from the wall socket,
never pull on the connection cable.
■ If malfunctions occur or thunder storms threaten pull the power plug from the
wall socket.
Danger from electric shock
DANGER
Risk of fatal electrocution!
A life-threatening situation can arise from contact with live
wires or components!
Observe the following safety instructions to avoid electric shock hazards:
► Do not use the device if the mains power plug or the connection cable are
damaged.
► Do not, under any circumstances, open the device housing. The risk of an
electric shock is present if the power carrying connections are touched or
the electrical and mechanical construction is changed.
Danger of hearing damage
WARNING
Danger from extreme volumes!
Listening to loud music via connected headphones can result in
hearing damage.
► Avoid extreme volumes, especially over long periods of time,
when you are using headphones.
KH 2600
5
Safety
Interaction with batteries
GB
IE
WARNING
Danger from improper use!
For safe handling of batteries observe the following safety instructions:
► Do not throw batteries into a fire.
► Do not short circuit batteries.
► Do not attempt to recharge batteries.
► Regularly check the condition of the batteries. Leaking battery acid can
cause permanent damage to the device. Special caution should be shown
when handling damaged or leaking batteries. Danger from acid burns!
Wear protective gloves.
► Store batteries in a place inaccessible to children. When swallowed seek
immediate medical attention.
► Remove the batteries from the device and the remote control if you do not
intend to use the device for an extended period of time.
KH 2600
6
General description
General description
GB
IE
Device summary
For the following see the diagrams on the fold out sides.
Lamp housing
2
3
Halogen lamp (42 W, E27)
Mood light (3 LEDs: green, blue and red)
Display
4
5
6
7
Station for iPod/iPhone
button: Volume increase
button: Volume decrease
8
9
SNOOZE Button: Activate snooze function / set the mood light colour
button: Reduce light intensity
button: Increase light intensity
10
11
►►I button: Title skip forwards / fast forward play (iPod/iPhone) / station search
(Radio) / selection of nature sounds 1-4
12
FUNC.: Select function
13 I◄◄ button: Title skip backwards / fast backward play (iPod/iPhone) / station
search (Radio) / selection of nature sounds 1-4
14 SLEEP button: Set automatic switch off / change between 12h/24h time of day
display
15 ►II button: Playback start / stop
16 Alarm2/UP button: Programme alarm 2 / memory slot selection upwards
17 MEMORY/TIME button: Save station (Radio) / setting the time in standby mode /
stop playback of iPod/iPhone
18 Alarm1/DOWN button: Programme alarm 1 / memory slot selection downwards
19
button: Switch lamp on/off / activate wake-up light function during wake time
programming
20
21
/ALARM OFF button: Switch device on/off / switch alarm off (Alarm)
Headphones connection socket
22
AUX IN: Audio input for the connection of an external device
23 Mains connection cable
24
25
26
Wire antenna for VHF reception
Temperature sensor
Battery compartment
KH 2600
7
General description
Remote control
GB
IE
All device functions can be carried out with the remote control.
1
2
3
: Standby
15
►►I : Fast play forward
I◄◄ : Fast play backwards
1
2
14
13
12
11
10
Memory control:
MEM: Programming stations
MEM +: Selecting memory slot
MEM -: Selecting memory slot
4
3
4
Alarm control:
Alarm ON/OFF
9
8
AL1: Programme alarm1 / memory slot
selection downwards
AL2: Programme alarm2 / memory slot
selection upwards
5
5
6
6
7
8
TIME: Set time of day
SNOOZE: Activate snooze function
SLEEP: Automatic switch off
Lamp control:
: Lamp ON/OFF
: brighter
7
9
: darker
10
11
12
: Volume decrease
: Stop
: Volume increase
13 ►II : Play/Pause
14 FUNC: Select function
15 COLOR: Select mood light colour
KH 2600
8
General description
Display
GB
IE
The symbols in the display have the following meanings:
Symbol
Meaning
Alarm 1 activated
Alarm 2 activated
Alarm tone
Radio function
Lamp / wake-up light function
Nature sound 1
Nature sound 2
Nature sound 3
Nature sound 4
Stereo reception
iPod/iPhone function
Automatic switch off activated
External audio device
VHF reception
Temperature Display
Memory slot indicator
Light intensity indicator
Volume level indicator
Snooze function activated
KH 2600
9
Setting up and connecting
Setting up and connecting
GB
IE
Safety instructions
WARNING
Damage may occur to people and property when operating
the device!
Observe the following safety information to avoid any risks:
► Packaging material should not be used as a play thing. There is a risk of
suffocation!
► To avoid risks to persons and property, pay attention to the requirements
for the set-up location and the electrical connections.
Package contents and transportation inspection
The device is delivered with the following components as standard:
▯ Wake-Up Light
▯ Remote control with battery (CR 2032, 3V)
▯ 2 x Batteries type AA, 1.5 V
▯ 5 x Adapter docks for iPod/iPhone
▯ Operating instructions
NOTICE
► Check the contents to make sure everything is there and for visible damage.
► If the items supplied are incomplete, or damaged due to defective
packaging or transportation, contact the Service Hotline (see chapter
Service).
Unpacking
¡ Remove all parts of the device and the operating instructions from the box.
¡ Remove all packing material.
KH 2600
10
Setting up and connecting
Disposal of the packaging
GB
IE
The packaging protects the device from transport damage. The packaging
materials are chosen from an environmentally friendly and disposal technological
point of view and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that in the case of a warranty claim you can package the device
properly for return.
Requirements for the set-up location
For safe and fault free operation of the device, the set-up location must fulfill the
following conditions:
■ Place the device on a firm, flat and level surface.
■ To avoid overheating maintain a free space of at least 15 cm around and
40 cm above the device.
■ Do not position the device in a dusty, hot, wet or very humid environment or
in the vicinity of flammable materials.
■ Protect the device from vibration.
■ The surfaces of furniture may contain components that could affect and
soften the rubber feet on the device. If necessary, place an anti-slip mat or
similar under the rubber feet of the device.
■ The wall socket must be easily accessible so that, in an emergency, the plug
can be quickly withdrawn from the socket.
KH 2600
11
Setting up and connecting
Electrical connections
GB
IE
■ Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate of the device with that of your power supply
network. This data must tally in order to avoid damage to the device.
■ Make sure that the device's connection cable is not damaged and is not
laying over hot surfaces and/or sharp edges.
■ Make sure that the connection cable is not tightly stretched or bent.
■ Do not allow the connection cord to hang over edges (Trip wire effect).
Inserting back-up batteries
By inserting the batteries you can avoid the loss of programmed time of day and
alarm wake time in the event of a possible power outage. The batteries make
sure that the internal clock continues to run even during a power outage. When
4
power is restored the correct time appears automatically in the display
.
NOTICE
► The back-up batteries only save the time of day and the programmed wake
time. All other functions are only possible with mains power operation.
► The device can also be operated without batteries.
26
¡ Slide the access cover of the battery compartment
on the underside of
the device in the direction of the arrow and remove the access cover.
¡ Insert 2 batteries type AA (supplied) into the battery compartment. Make
sure that you observe the polarity as depicted in the battery compartment.
¡ Close the battery compartment by replacing the access cover, slide back in
and allow it to lock into place.
KH 2600
12
Setting up and connecting
Activating the remote control battery
The remote control battery is already inserted when delivered.
¡ Activate the battery by removing the isolation strip.
GB
IE
Changing the remote control battery
¡ Press, with the fingernail, the recess (A) to the right
and, at the same time, pull the battery compartment
out.
¡ Insert a 3 V battery type CR 2032 in the battery
compartment. The side with the marking "+" points
upwards.
¡ Slide the battery compartment completely back into
the remote control.
Providing mains power
¡ Place the device approx. 40 to 50 cm away from your head (i.e. on the
bedside table).
4
¡ Plug the mains power plug into a wall socket. In the display
the time of
day (0:00 o'clock) and the temperature will be shown.
VHF wire antenna
24
¡ For VHF reception completely unfold the wire antenna
.
Connecting the headphones
¡ If required you can connect headphones (with a 3.5 mm jackplug) to the
21
connection socket
on the rear panel of the device. The speakers then
switch off automatically.
KH 2600
13
Handling and operation
Handling and operation
GB
IE
In this chapter you receive important information for the handling and operation
of the device.
Switching On and Off
20
¡ Press the /ALARM OFF button
to switch the device on. The display
or the button on the remote control
4
is activated.
20
¡ Press the /ALARM OFF button
or the button on the remote control
4
to switch the device off. In the display
is shown the time of day, the
temperature and a programmed alarm time (Standby mode).
NOTICE
► The /ALARM OFFbutton
20
does not completely disconnect the device
from the mains power. To completely disconnect the device from the mains
23
power the mains power cable plug
must be pulled from the mains socket.
Setting the time
Prerequisite: The device is in standby mode.
¡ Press the MEMORY/TIME button 17 or the TIME button on the remote
4
control. The hour indicator in the display
blinks.
14
¡ Press the SLEEP button
for approx. 2 seconds to switch between the
12h/24h time of day display.
¡ Set, with the ►►I button 11 or the I◄◄ button 13 , the current time of day
hour. With each button press the time changes by one hour. Holding down
the respective button for more than 2 seconds starts the speed setting.
¡ Press the MEMORY/TIME button 17 or the TIME button on the remote
4
control. The minute indicator in the display
blinks.
13
¡ Set, with the ►►I button 11 or the I◄◄ button , the current time of day
minutes. With each button press the time changes by one minute. Holding
down the respective button for more than 2 seconds starts the speed setting.
¡ Press the MEMORY/TIME button 17 or the TIME button on the remote
control to confirm the time input or wait for approx. 7 seconds after which
the time input will be automatically confirmed.
NOTICE
► The time of day will revert back to 0:00 o'clock if the device is disconnected
from the mains power supply with no back-up batteries inserted or if the
back-up batteries are too weak.
KH 2600
14
Handling and operation
Adjusting the volume
GB
IE
Prerequisite: The device is switched on.
6
7
¡ Press the
button
or
button
on the device or on the remote
control to adjust the volume. The set volume level is shown below and to the
4
right in the display
.
NOTICE
► The set volume applies for all functions.
► The volume you have selected will also be saved automatically as the
volume for the wake function.
Radio operation
NOTICE
24
► For a good radio reception the wire antenna
must be completely un-
coiled. Adjust the antenna, whilst in radio operation, to the best reception.
Switching on the radio
20
¡ Press the /ALARM OFF button
button on the remote control to switch the
device on.
or the
12
¡ Press the FUNC. button
several times to
4
select the radio function. In the display
appears the symbol
and the current recep-
tion frequency of the set station.
Manual station selection
11
13
briefly to set the frequency of the
¡ Press the ►►I button
or I◄◄ button
desired station gradually with each button press.
Automatic station search
11
13
for at least two
¡ Press and hold down the ►►I button
or I◄◄ button
seconds. The device automatically searches for the nearest station with
sufficient reception quality.
NOTICE
► If the reception quality is especially high, in the display
4
appears the
stereo symbol
.
KH 2600
15
Handling and operation
Saving stations manually
GB
IE
The device has 20 memory slots available for station frequencies. To save a
station frequency proceed as follows:
20
¡ Press the /ALARM OFF button
or the button on the remote control
to switch the device on.
12
¡ Press the FUNC. button
several times to select the radio function.
11
13
.
¡ Select a station with the ►►I button
or the I◄◄ button
¡ Press the MEMORY/TIME
button 17 or the
MEM button on the remote control. "MEMORY"
4
appears in the display
and "01" blinks.
¡ Press the ALARM1/ALARM2 button or the
MEM-/MEM+ button on the remote control
to select the desired memory slot between 01
and 20.
¡ Press the MEMORY/TIME
button 17 or the
MEM button on the remote control again to
save the reception frequency of the set station
to the selected memory slot.
NOTICE
► If no input is made within approx. 5 seconds after the MEMORY/TIME
button or the MEM button on the remote control is pressed the "MEMORY
01" indicator in the display goes out and the current station is not saved.
Selecting a saved radio station
20
¡ Press the /ALARM OFF button
button on the remote control to switch the
device on.
or the
12
¡ Press the FUNC. button
select the radio function.
several times to
¡ Select with the ALARM1/ALARM2 buttons or
the MEM-/MEM+ buttons on the remote control
the desired memory slot for the saved station
between 01 and 20.
KH 2600
16
Handling and operation
Playback music from an iPod/iPhone
GB
IE
5
With the station
you can use the device as a speaker for your iPod/iPhone.
If you insert the iPod/iPhone in the station it will, in addition, be automatically
charged.
The device is equipped with 5 adapters for the station thus even the most current
iPod/iPhone models will, in any case, fit into the station. The adapters, provided
with numbers, are on the rear panel. In the table you will find, itemized, the
adapter that is to be used for your model.
You can use the station for the following iPod and iPhone models:
Model
Type
Adapter
5G iPod (with video)
U2 iPod with video
iPod classic
30GB
9
30GB
9
80GB, 120GB
8GB & 16GB
8GB, 16GB, & 32GB
16GB, 32GB, & 64GB
8GB & 16GB
16GB & 32GB
8GB & 16GB
8GB & 16GB
9
iPod touch
14
14
14
15
15
17
18
iPod touch 2G
iPod touch (Fall 2009)
iPhone 3G
iPhone 3GS
iPod nano (4th generation)
iPod nano (5th generation)
IMPORTANT
Damaging of the device or the iPods/iPhones!
Inserting the iPods/iPhones without an adapter can result in damage to the
device and/or the iPods/iPhones.
► Place the iPod/iPhone in the station only with the proper adapter.
► In the event that the proper adapter has not been provided get in touch
with the Service-Hotline (see chapter Service).
KH 2600
17
Handling and operation
Inserting / removing the adapter in / from the station
GB
IE
Select from the table the required adapter and place it in the station dock as
follows:
Groove
Adapter
¡ Lay the front edge of the
adapter on the front edge of
the dock.
¡ Press the rear edge down-
wards until you hear a light
"click".
Station
To remove the adapter from the dock proceed as follows:
¡ Grip with the thumbnail in the groove and lift the adapter out of the dock.
Playback of music
5
¡ Insert your iPod and/or iPhone into the station
.
12
¡ Press the FUNC. button
several times to select the iPod/iPhone function.
4
In the display
appears the symbol and the music playback can begin.
Title skip and fast forward / backward
11
¡ Press the ►►Ibutton
on the device or on the remote control to skip to the
beginning of the next title.
13
¡ Press the I◄◄ button
on the device or on the remote control to skip to the
13
beginning of the current title. Press the I◄◄ button
a second time to skip
for fast forward / back-
button on the remote
to the beginning of the previous title.
11
13
¡ Hold down the ►►I button
or I◄◄ button
ward.
¡ Press the MEMORY/TIME
button 17 or the
control to stop playback.
Charging the iPod/iPhone
If your iPod/iPhone is inserted into the station it will charge automatically until the
battery is full.
NOTICE
► The iPod/iPhone will not charge via the back-up battery.
KH 2600
18
Handling and operation
Playback of external audio devices
GB
IE
¡ Connect an external audio device, for example, an MP3 player to the
22
3.5 mm jackplug socket AUX IN
on the rear panel of the device.
12
¡ Press the FUNC. button
several times to select the AUX function.
¡ Start playback of the external audio device and set the volume.
NOTICE
► Follow the operating instructions for the external audio device.
Playback of nature sounds
20
¡ Press the /ALARM OFF button
or the button on the remote control
to switch the device on.
12
°
Press the FUNC. button
tion
several times to select the nature sounds func-
.
11
13
between the following
¡ Select with the ►►I button
or the I◄◄ button
4 nature sounds:
Rain
Babbling brook
Seagulls
Rural life
Mood lighting
8
¡ Press the SNOOZE button
on the device to switch on the mood lighting.
The LEDs light up in the following sequence:
blue → red → red + blue → green → green + blue → red + green → all LEDs → etc.
8
¡ Press the SNOOZE button
again when the desired colour lights up to set
this colour permanently.
8
¡ Press the SNOOZE button
once more to switch off the mood lighting.
NOTICE
8
► Instead of the SNOOZE button
control can also be used.
the COLOUR button on the remote
8
► The colour setting via the SNOOZE button
function has been activated.
will not work if the SNOOZE
KH 2600
19
Handling and operation
Reading lamp
GB
IE
You can use the device as a reading lamp.
19
¡ Press the
button
on the device or on the remote control to switch the
lamp on and off.
¡ Press the
/
button to set the brightness. The symbol and the
4
light intensity (00 to 20) are shown in the display
.
NOTICE
► If you have set the light intensity to 00 you can, by all means, set a higher
value, the lamp remains, however, switched off and must be switched back
19
on via the
button
on the device or on the remote control.
► The light intensity that you have selected will also be saved automatically
as the light intensity for the wake function.
Replacing the halogen lamp
2
The halogen lamp
decreases.
must be replaced if it is defective or the light intensity
DANGER
Risk of fatal electrocution!
2
► Pull the plug from the mains socket before you change the halogen lamp
.
NOTICE
2
► The halogen lamp
type: E27 42 W.
must only be replaced with one of the same lamp
in the direc-
¡ Turn the lamp housing
tion of the arrow and lift it upwards.
¡ Unscrew the defective halogen lamp
from the lamp socket.
¡ Screw a new 42 W halogen lamp into
the lamp socket.
¡ Place the lamp housing
carefully
from above and turn it in the opposite
direction to the arrow to attach.
KH 2600
20
Handling and operation
Alarm Function
GB
IE
When setting the wake time you configure the light intensity, the wake sound
and the volume. In the 30 minutes before the set wake time the light intensity
increases slowly to the selected level. When the set wake time is reached the
sound level increases, within 90 seconds, slowly to the selected volume.
Programming alarm wake times
The device has two alarms available. All settings for both alarms can be carried
out independently from each other. You can choose whether, at the programmed
time, an alarm tone or a variety of nature sounds should be played, whether
the radio should sound out or music from an iPod/iPhone or an external audio
device should be played.
Prerequisite: The device is in standby mode.
18
¡ Press the ALARM1/DOWN button
/
16
ALARM2/UP button
on the device or the
AL1/AL2 button on the remote control. The hour
4
indicator in the display
blinks.
11
13
¡ Set with the ►►I button
or the I◄◄ button
the hour. With each button press the time changes
by one hour. Holding down the respective button
for more than two seconds starts the speed setting.
18
¡ Press the ALARM1/DOWN button
/
16
ALARM2/UP button
on the device or the
AL1/AL2 button on the remote control. The
4
minute indicator in the display
blinks.
11
¡ Set with the ►►I button
or the I◄◄ button
13
the minutes. With each button press the time
changes by one minute. Holding down the re-
spective button for more than two seconds starts
the speed setting.
18
16
on the
¡ Press the ALARM1/DOWN button /ALARM2/UP button
device or the AL1/AL2 button on the remote control again to confirm the
setting.
KH 2600
21
Handling and operation
Setting the wake tone
GB
IE
11
13
¡ Press the ►►I button
or the I◄◄ button
repeatedly to select a wake tone:
→
→
→
→
→
→
→
delete. (For an explanation of the symbols see
chapter Display.)
¡ Press the
button to activate, in addition, the
wake-up light function.
NOTICE
► Set the volume that you want to be woken with as described in the chapter
Setting the volume.
► Set the light intensity that you want to be woken with as described in the
chapter Reading lamp.
► The wake-up light function can only be activated together with a wake
tone. The light intensity increases in the 30 minutes before the set wake
4
time and the
symbol blinks in the display
.
► To be woken with the wake-up light only the volume must be set to 00.
18
16
on the
¡ Press the ALARM1/DOWN button /ALARM2/UP button
device or the AL1/AL2 button on the remote control again to confirm the
setting or wait approx. 7 seconds and the alarm will be confirmed automati-
cally.
The symbol for the selected wake tone blinks in the display and the alarm goes
off via the speaker with the arrival of the wake time.
NOTICE
► If you want to use music from your iPod/iPhone as the wake tone select a
title on the iPod/iPhone (or an album and/or playback list) that is to be
used as a wake tone. Your choice will be played back when the set wake
time arrives.
KH 2600
22
Handling and operation
Switching the alarm off
GB
IE
Snooze function ("SNOOZE" function)
¡ Whilst the alarm is sounding press the SNOOZE
button
In the display
to temporarily switch off the alarm.
8
4
appears the notice
.
After 9 minutes the alarm sounds again.
(In the diagram on the right both alarm 1 and alarm 2
are programmed. The alarm 2 goes off and the symbol
blinks.)
Switching the alarm off
When the programmed time is reached the alarm continues to sound until it is
switched off.
20
¡ Press the /ALARM OFF button
or the
button on the remote control
to switch the alarm off.
¡ Press the
button if you have activated the wake-up light function.
NOTICE
► The alarm goes off again within 24 hours.
Fast switch on/off of the alarm
Prerequisite: The device is in standby mode.
18
16
on the
¡ Press the ALARM1/DOWN button /ALARM2/UP button
device or the AL1/AL 2 button on the remote control continually until the
alarm symbol
/
in the display appears/disappears.
NOTICE
► The last selected alarm settings remain saved.
KH 2600
23
Handling and operation
Deleting wake times
¡ Press the ALARM1/DOWN button /ALARM2/UP button
GB
IE
18
16
on the
device or the AL1/AL 2 button on the remote control three times until the
4
alarm symbol in the display
blinks.
11
13
until no more wake tones
¡ Press the ►►I button
or the I◄◄ button
.
4
appear in the display
18
16
¡ Press the ALARM1/DOWN button /ALARM2/UP button
on the
device or the AL1/AL2 button on the remote control again or wait approx.
10 seconds. There are no more wake times programmed.
Automatic Switch-off ("SLEEP" function)
With the sleep function you can listen to your favourite music or your favourite
station whilst falling asleep. The device switches itself off after a time between
10 and 90 minutes.
Prerequisite: The device is set to either the radio, AUX IN or iPod/iPhone
function.
4
14
¡ Press the SLEEP button . In the display
and the notice
¡ Press the SLEEP button
appears the symbol
.
14
again to reduce the time in increments of
10 minutes with each button press.
Setting options: 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. After five
seconds the selected setting is saved.
14
¡ Press the SLEEP button
again to switch off the "Sleep" function.
¡ To end the sleep function before it is automatically ended press the
/
20
ALARM OFF button
or the
button on the remote control.
KH 2600
24
Cleaning/Storage/Disposal
Cleaning
GB
IE
Safety instructions
DANGER
Risk of fatal electrocution!
► Remove the plug from the mains power socket before cleaning.
IMPORTANT
Damage to the device!
► Make sure when you are cleaning the device that no moisture gets inside
in order to avoid irreparable damage to it.
Cleaning the housing
■ Clean the surfaces of the device with a soft, dry cloth.
Storage/Disposal
Storage
If you do not intend to use the device for an extended period of time disconnect
it from the power supply, remove the batteries and store it in a clean, dry location
that is not subjected to direct sunlight.
Disposal of the device
Do not dispose of the device in your normal domestic waste.
This product is subject to the European directive 2002/96/EC-
WEEE (Waste Electrical and Electronic Equipment).
Dispose of the device through an approved disposal centre or at your community
waste facility. Observe the currently applicable regulations. In case of doubt,
please contact your waste disposal centre.
Disposing of the batteries
Do not dispose of the batteries with household waste. Every consumer is legally
obligated to hand in batteries at a collection centre in his/her community/district
or a dealer. This obligation is intended to ensure that batteries are disposed of in
an environmentally friendly manner. Hand batteries in only when they are fully
discharged.
KH 2600
25
Troubleshooting
Troubleshooting
GB
IE
In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
Safety instructions
WARNING
Observe the following safety information to avoid danger and property
damage:
► Repairs to electronic devices may only be carried out by specialists who
have been trained by the manufacturer. Considerable danger to the con-
sumer and damage to the device can occur as a result of incorrect repairs.
Malfunction causes and remedies
The following table will help with localizing and remedying minor malfunctions:
Defect
Possible cause
Solution
Insert the plug into the
mains power socket.
The plug is not inserted.
The display is
showing nothing.
Mains power socket is not
supplying power.
Check the circuit fuse.
Increase the volume with the
The volume is set to
minimum.
6
button
on the device or on the
remote control.
No sound.
Headphones are con-
nected.
Remove the headphones plug from
21
the connection socket
.
Playback of the audio de-
vice has not been started.
Start playback of the audio device.
The radio station is not
properly tuned in.
Tune the station correctly with the ►►I
button 11 or the I◄◄ button 13.
Noisy radio recep-
tion
Try to improve reception by moving
Reception is too weak.
28
the wire antenna
.
KH 2600
26
Troubleshooting/Appendix
Defect
Possible cause
Solution
GB
IE
The alarm time is incorrectly
programmed.
Check the programmed wake time.
The alarm does not The alarm is not program-
Programme the alarm correctly.
go off.
med.
The device is not in standby Switch the device to the standby
mode.
mode before you go to sleep.
iPod/iPhone does
not charge.
The mains power plug is
not plugged in.
Insert the plug into the mains power
socket.
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Service.
Appendix
Information regarding the EC conformity declaration
This device complies regarding conformance to the basic
requirements and other relevent regulations of the European
directive for electromagnetic compatibility 2004/108/EC,
the low voltage directive 2006/95/EC as well as the Eco-
design directive 2009/125/EC (Supplement 1275/2008
Appendix II, Nr.1)
The complete original declaration of conformity can be
obtained from the importer.
KH 2600
27
Appendix
Technical data
GB
IE
Operational voltage
220-240 V / 50 Hz
2 x 1.5 V Typ “AA”
(supplied)
Backup batteries
Remote control Battery:
Power consumption
3 V, CR 2032
Operation with light
50
W
W
Operation without light
10
Standby
approx. 1.7
W
Speaker power output:
Headphone Output Voltage
Radio frequency range (VHF)
Lamp E27
2 x 1 W (with 10 % harmonic distortion)
max. 120 mV
87.5 - 108 MHz
max. 42
+10 - +35
W
°C
%
Operating temperature
Humidity (no condensation)
Dimensions (H x W x D)
Weight
5 - 90
29 x 17.5 x 19.5
approx. 1650
cm
g
Protection class
II
KH 2600
28
Appendix
Warranty
GB
IE
You receive a 3-year warranty for this device as of the purchase date. This device
has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim,
please get in touch by telephone with our service department. Only in this way
can a post-free dispatch for your goods be assured.
NOTICE
► The warranty adjustment is valid only for material or manufacturing defects
not, however, for transport damage, wear and tear or for damage to break-
able parts, i.e. switches or rechargeable batteries.
This product is for private use only and is not intended for commercial applica-
tions. In the event of misuse and improper handling, use of force and interference
not carried out by our authorized service branch, the warranty will become void..
Your statutory rights are not restricted in any way by this warranty. The warranty
period is not extended by repairs effected under warranty. This applies also to
replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after
unpacking, at the latest two days after the purchase date.
Repairs carried out after the lapse of the warranty period are subject to charge.
Service
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
KH 2600
29
|