Silvercrest SRD 250 A1 User Manual

6
Clock Radio SRD 250 A1  
Clock Radio  
Operating instructions  
KOMPERNASS GMBH  
BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: SRD 250 A1-01/11-V2  
IAN: 61030  
Index  
GB  
IE  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Information for these operating instructions . . . . . . . . . . . . . . . . . 3  
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Danger from electric shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Interaction with batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Operating components. . . . . . . . . . . . . . . . . . . . . . . . . 8  
Setting up and connecting . . . . . . . . . . . . . . . . . . . . . . 9  
Package contents and transport inspection. . . . . . . . . . . . . . . . . . 9  
Set-up location requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Providing mains power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
VHF wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Handling and operation . . . . . . . . . . . . . . . . . . . . . . . 11  
Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Programming the wake time and method . . . . . . . . . . . . . . . . . . 13  
Switching the alarm function on . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Switching the alarm off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Switching the alarm function off . . . . . . . . . . . . . . . . . . . . . . . . . 14  
SRD 250 A1  
1
Snooze function (“SNOOZE” function) . . . . . . . . . . . . . . . . . . . 14  
Automatic Switch-off (“SLEEP” function) . . . . . . . . . . . . . . . . . . . 14  
Setting the display illumination . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
GB  
IE  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Malfunction causes and remedies. . . . . . . . . . . . . . . . . . . . . . . . 16  
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Disposal of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Disposing of the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Information regarding the EG Conformity Declaration. . . . . . . . 19  
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Importer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
SRD 250 A1  
2
Introduction  
Introduction  
GB  
IE  
Information for these operating instructions  
These operating instructions are a component of the SRD 250 A1  
Clock Radio (henceforth designated as the appliance) and they  
supply you with important information about the intended use,  
safety and connection as well as operation of the appliance.  
These operating instructions must be kept available close to the  
appliance. They are to be read and used by anyone assigned to  
operate and repair faults in the appliance. Retain these operating  
instructions and pass them on to any future owners with the appliance.  
Copyright  
This documentation is copyright protected.  
Any copying and/or reproduction, wholly or partially, as well as  
rendition of the illustrations, also in a modified form, is permitted  
only with written consent from the manufacturer.  
Intended use  
This device is intended exclusively for listening to radio programmes  
and for waking by an alarm tone or radio in a domestic environment.  
This appliance is not intended for any other use or for uses beyond  
those mentioned. Claims of any kind for damage caused by improper  
use, incompetent repair, unauthorized modification or the use of  
unauthorized parts are excluded. The risks from these are borne  
entirely by the user.  
SRD 250 A1  
3
Introduction  
In these operating instructions the following warnings are used:  
GB  
IE  
DANGER  
A warning at this danger level indicates a threatening  
dangerous situation.  
In the event that the hazardous situation is not avoided it can lead  
to death or serious injury.  
Compliance to the instructions in this warning are necessary  
to avoid the danger of death or serious injury.  
WARNING  
A warning at this danger level indicates a potentially  
dangerous situation.  
If the dangerous situation is not avoided it can lead to injuries.  
The directives in this warning are there to avoid personal injuries.  
IMPORTANT  
A warning of this danger level signifies possible  
property damage.  
If the situation is not avoided it can lead to property damage.  
The directives in this warning are there to avoid property damage.  
NOTE  
A notice signifies additional information that assists in the  
handling of the appliance.  
SRD 250 A1  
4
Safety  
Safety  
GB  
IE  
In this chapter you receive important safety information regarding  
handling of the appliance. This appliance complies with the statu-  
tory safety regulations. Incorrect usage can lead to injuries and  
property damage.  
Danger from electric shock  
DANGER  
Life-threatening situation from electric shock!  
A life-threatening situation can arise from contact  
with live wires or components!  
Observe the following safety instructions to avoid electric shock  
hazards:  
Do not use the appliance if the mains power plug or the  
connection cable are damaged.  
Do not, under any circumstances, open the appliance housing.  
The risk of an electric shock is present if the power carrying  
connections are touched and the electrical and mechanical  
construction is changed.  
The appliance consumes power when in standby-mode.  
To completely separate the appliance from mains power, the  
power plug MUST be removed from the mains power socket.  
The appliance should be positioned so that you have unrestricted  
access to the mains power socket at all times, thus enabling  
the plug to be immediately withdrawn should an emergency  
situation arise.  
SRD 250 A1  
5
Safety  
Interaction with batteries  
GB  
IE  
WARNING  
Danger from improper use!  
For safe handling of batteries observe the following safety  
instructions:  
Do not throw batteries into a fire.  
Do not short circuit batteries.  
Do not attempt to recharge batteries.  
Never open, solder or weld batteries. The risk of explosions  
and injuries exists.  
Regularly check the condition of the batteries. Leaking battery  
acid can cause permanent damage to the appliance. Special  
caution should be shown when handling damaged or leaking  
batteries. Danger from acid burns! Wear protective gloves.  
Store batteries in a place inaccessible to children.  
When swallowed seek immediate medical attention.  
If you do not intend to use the appliance for an extended  
period of time, remove the batteries.  
Basic Safety Instructions  
For safe handling of the appliance observe the following safety  
information:  
Before use check the appliance for visible external damage. Do  
not put into operation an appliance that is damaged or has been  
dropped.  
Damaged cables or connections should be replaced by authorised  
qualified persons or by the customer service department.  
SRD 250 A1  
6
Safety  
Persons who, due to their physical, intellectual or motor abilities,  
are incapable of operating the appliance safely may only use the  
device under supervision or direction from a responsible person.  
GB  
IE  
Only permit children to use the appliance under supervision.  
Repairs should only be carried out by authorised specialist companies  
or by the customer service department. Incorrect repairs can result in  
danger to the user. In addition warranty claims become void.  
A repair to the appliance during the warranty period may only  
be carried out by a customer service department authorised by  
the manufacturer otherwise no additional warranty claims can  
be considered for subsequent damages.  
Defective components may only be replaced with original replace-  
ment parts. Only by using original replacement parts can you  
guarantee that the safety requirements are complied with.  
Protect the appliance from moisture and liquid penetration. Never  
submerge the appliance in water, do not place the appliance in  
the vicinity of water and do not stand any object filled with liquid  
(i.e. vases) on the appliance.  
Do not place any objects on the appliance.  
Do not operate the appliance in the vicinity of open flames  
(i.e. candles).  
Avoid direct sunlight.  
Always pull on the power plug when disconnecting from the wall  
socket, never pull on the connection cable.  
If malfunctions occur or thunder storms threaten pull the power  
plug from the wall socket.  
SRD 250 A1  
7
Operating components  
Operating components  
GB  
IE  
SNOOZE Button: Alarm interupt  
Display  
2
3
POWER-LED: Lights up when the device is switched on  
MHz-LED: Lights up with VHF reception  
kHz-LED: Lights up with MW reception  
SLEEP-LED: Lights up when the SLEEP function is switched on  
TUNING regulator: Station selection  
Wire antenna  
4
5
6
7
8
9
POWER/BAND button: Switch device on / off /  
select frequency band  
10  
11  
12  
DOWN button: Adjustments downwards  
Battery compartment  
UP button: Adjustments upwards  
13 TIME button: Set the time  
14 SLEEP button: Set the automatic switch off  
15 AL2 button: Set Alarm time 2  
16 AL1 button: Set Alarm time 1  
17 Power Cable  
18 VOL control: Volume control  
19 DIMMER switch: Set the display illumination  
SRD 250 A1  
8
Setting up and connecting  
Setting up and connecting  
GB  
IE  
Package contents and transport inspection  
The appliance is delivered with the following components as  
standard:  
Clock Radio  
Operating instructions  
Extract the appliance and the instruction manual from the carton  
and remove all packaging material.  
NOTE  
Check the contents to ensure everything is present and there  
are no signs of visible damage.  
If the contents are not complete or are damaged as a result  
of defective packaging or through transportation, contact the  
Service Hotline (see chapter Service).  
Set-up location requirements  
For safe and fault free operation of the appliance the set-up  
location must comply with the following provisions:  
Place the appliance on a firm, flat and even surface .  
Place the appliance so that the ventilation slots are not covered.  
Do not place the appliance in a hot, wet or very humid location  
or in the vicinity of flammable materials.  
SRD 250 A1  
9
Setting up and connecting  
The surfaces of furniture may contain components that can affect  
the rubber pads of the appliance and could soften them. If neces-  
sary, place a covering under the appliance's rubber pads.  
GB  
IE  
The mains power socket must be easily accessible so that, in an  
emergency, the plug can be quickly withdrawn from the socket.  
Electrical connection  
Before connecting the appliance compare the connection data  
(Voltage and frequency) on the rating plate with that of the mains  
electric source. This data must be compatible to avoid possible  
damage to the appliance.  
Make sure that the appliance's connection cable is not damaged  
and is not laying over hot surfaces and/or sharp edges.  
Make sure that the connection cable is not tightly stretched or bent.  
Do not allow the connection cable to hang over edges  
(Trip wire effect).  
Inserting the batteries  
By inserting two 1.5 V batteries (type R6/LR6/AA/Mignon) you  
avoid losing the programmed time of day and wake time in the  
event of mains power loss. The batteries make sure that the internal  
clock continues to run even during a power outage.  
When power is restored the correct time appears automatically  
2
in the display  
.
NOTICE  
The display, radio and alarm do not function with battery-  
power alone.  
SRD 250 A1  
10  
Handling and operation  
11  
on the bottom of  
Open the cover of the battery compartment  
the device.  
GB  
IE  
Insert two 1.5 V batteries type R6/LR6/AA/Mignon (not supplied)  
11  
into the battery compartment . For correct polarity make sure  
that the batteries are inserted according to the diagram in the  
11  
battery compartment  
.
11  
by replacing the cover and  
Close the battery compartment  
allowing it to lock into place.  
Providing mains power  
Plug the mains power plug into a wall socket. The time of day  
2
(- -:- -) will be shown in the display  
.
VHF wire antenna  
8
For VHF reception completely unfold the wire antenna  
.
Handling and operation  
In this chapter you receive important information for the handling  
and operation of the appliance.  
Setting the time  
2
Press and hold the TIME button 13. In the display  
indicator blinks.  
the hour  
12  
10  
10  
Press or hold down the UP button  
to set the hour.  
and/or DOWN button  
2
Press the TIME button 13 again. In the display  
the minute  
indicator blinks.  
12  
Press or hold down the UP button  
to set the minutes.  
and/or DOWN button  
Press the TIME button 13 again. The set time of day will be accepted.  
SRD 250 A1  
11  
Handling and operation  
NOTICE  
GB  
IE  
The time of day will revert back to - -:- - if the device is discon-  
nected from the mains power supply and no batteries have  
been inserted.  
Radio operation  
9
Press the POWER/BAND button  
to switch the device on.  
With the VOL control 18 set the desired sound level.  
9
Press briefly the POWER/BAND button  
to set the desired  
4
frequency band. With VHF reception the MHz-LED  
lights up,  
5
with MW reception the kHz-LED  
lights up.  
7
With the TUNING control  
set the desired radio station.  
9
Press for approx. two seconds the POWER/BAND button  
switch the device off.  
to  
NOTE  
The technical realities of the appliance permit an adjustable  
frequency range outside the permitted frequency ranges  
of VHF (FM) 87.5 - 108 MHz and/or MW (AM) 526,5 -  
1606,5 kHz. In some countries, different national regulations  
may apply to the assigned radio frequency ranges. Please  
note that information received outside of the assigned radio  
frequency ranges may not be used, passed on to third parties  
or otherwise misused.  
SRD 250 A1  
12  
Handling and operation  
Programming the wake time and method  
GB  
IE  
When programming the alarm times, you can select whether,  
at the programmed time, alarm tones should sound or the radio  
should start playing. Two different alarm times (Alarm 1/Alarm 2)  
can be programmed.  
2
Press and hold the AL1 button 16 or AL2 button 15. In the display  
the hour indicator blinks.  
10  
or DOWN button  
12  
Press or hold down the UP button  
to set the hour.  
2
Press the AL1 button 16 or AL2 button 15 again. In the display  
the minute indicator blinks.  
10  
or DOWN button  
12  
Press or hold down the UP button  
to set the minutes.  
Press the AL1 button 16 or AL2 button 15 again. The set wake  
2
time is accepted and in the display  
indicator.  
appears the wake method  
12  
Press the UP button  
Alarm tone or  
to set the desired wake method (  
= Radio).  
=
Press the AL1 button 16 or AL2 button 15 again to accept the  
setting.  
NOTICE  
If you want to be awakened with the radio, apart from the wake  
time programming you must also set, additionally, the desired  
radio station and volume (see section Radio operation).  
SRD 250 A1  
13  
Handling and operation  
Switching the alarm function on  
GB  
IE  
Press briefly the AL1 button 16 and/or AL2 button 15. In the dis-  
2
play  
a point appears to the left and/or to the right. The alarm  
function is now activated.  
Switching the alarm off  
9
Whilst the alarm is sounding press the POWER/BAND button  
to switch the alarm off for 24 hours.  
,
Switching the alarm function off  
Press briefly the AL1 button 16 and/or AL2 button 15. The alarm  
2
indicators go out in the display  
.
Snooze function (“SNOOZE” function)  
Whilst the alarm is sounding press the SNOOZE button to tempo-  
rarily switch off the alarm. After 6 minutes the alarm sounds again.  
NOTICE  
If the snooze function is activated the corresponding alarm  
2
point blinks in the display  
.
Automatic Switch-off (“SLEEP” function)  
With the “Sleep” function the device switches itself off after a time  
lapse of between 60 and 10 minutes.  
9
Press the POWER/BAND button  
to switch the device on.  
2
Press the SLEEP button 14. In the display  
time 60 minutes and the SLEEP-LED  
appears the switch off  
6
lights up. Repeated press-  
ing of the SLEEP button 14 shortens the switch off time by  
10 minutes respectively.  
SRD 250 A1  
14  
Cleaning  
Press repeatedly the SLEEP button 14 until the desired  
GB  
IE  
2
switch of time is shown in the display  
.
14  
To switch off the sleep function press repeatedly the SLEEP button  
,
6
2
until in the display  
is shown. The SLEEP-LED  
goes out.  
Setting the display illumination  
19  
Set the DIMMER switch  
to HIGH if you want the indicators in  
2
the display  
to appear brighter.  
19  
Set the DIMMER switch  
to LOW if you want the indicators in  
to appear darker.  
2
the display  
Cleaning  
DANGER  
Risk of fatal electrocution!  
Remove the plug from the mains power socket before cleaning.  
Whilst cleaning make sure that no moisture is allowed to enter  
the device.  
Do not use aggressive cleaning agents or scouring powder.  
These can affect the surfaces of the device.  
Clean the surfaces of the device with a soft, dry cloth.  
SRD 250 A1  
15  
Troubleshooting  
Troubleshooting  
GB  
IE  
In this chapter you will receive important information for the locali-  
sation of malfunctions and their remedies. Observe the instructions  
in order to avoid danger and damage.  
Malfunction causes and remedies  
The following table will help with localizing and remedying minor  
malfunctions:  
Defect  
Possible cause  
Solution  
The plug is not  
inserted.  
Insert the plug into the  
mains power socket.  
Appliance  
does not  
switch on.  
Mains power socket  
is not supplying  
power.  
Check the circuit fuse.  
Increase the sound  
volume with the  
VOL regulator 18.  
The volume is set to  
minimum.  
No sound  
The radio station  
is not properly  
tuned in.  
Tune in the radio station  
properly with the TUNING  
regulator 7 .  
Noisy radio  
reception  
Try to improve reception  
by moving the wire  
Reception is  
too weak.  
8
antenna  
.
NOTE  
If you cannot solve the problem with the aforementioned  
methods, please contact Customer Service .  
SRD 250 A1  
16  
Storage/Disposal  
Storage  
GB  
IE  
If you do not intend to use the appliance for an extended period  
of time, disconnect it from the mains power supply, remove the  
battery and store it at a clean, dry location that is not subjected  
to direct sunlight.  
Disposal  
Disposal of the appliance  
Do not dispose of the appliance in your normal  
domestic waste. This product is subject to the  
provisions of European Directive 2002/96/EC.  
Dispose of the appliance through an approved disposal centre or  
at your community waste facility. Observe the currently applicable  
regulations. In case of doubt, please contact your waste disposal  
centre.  
Disposing of the batteries  
Do not dispose of the batteries with household waste. Every con-  
sumer is legally obligated to hand in batteries at a collection centre  
in his/her community/district or a dealer. This obligation is intended  
to ensure that batteries are disposed of in an environmentally safe  
fashion. Hand batteries in only when they are fully discharged.  
SRD 250 A1  
17  
Appendix  
Appendix  
GB  
IE  
Technical data  
Operational voltage  
220-240 V / 50 Hz  
2 x 1.5 V battery  
Type AA/Mignon/R6/LR6  
(Batteries not supplied)  
Batteries for power reserve  
Power consumption  
Operation  
10  
W
W
Standby  
approx. 1.5  
Max. Loudspeaker  
Output Power  
250 mW  
Frequency FM (USW)  
Frequency AM (MW)  
Operating temperature  
Humidity (no condensation)  
87.5 - 108 MHz  
526.5 - 1606.5 kHz  
+5 - +40  
5 - 90  
°C  
%
cm  
g
Measurements (W x H x D)  
14.3 x 13.3 x 8.3  
Weight  
approx. 435  
II  
Protection class  
SRD 250 A1  
18  
Appendix  
Information regarding the EG Conformity  
Declaration  
GB  
IE  
This appliance complies with, in regard to conformance to the basic  
requirements and other relevent regulations, the European Directive  
for Electromagnetic Compatibility 2004/108/EC, the Low Voltage  
Directive 2006/95/EC as well as the Eco-Design Directive  
2009/125/EC (Supplement 1275/2008 Appendix II, Nr.1).  
The complete original declaration of conformity can be obtained  
from the importer.  
Warranty  
You receive a 3-year warranty for this appliance as of the purchase  
date. This appliance has been manufactured with care and meticu-  
lously examined before delivery.  
Please retain your receipt as proof of purchase. In the case of a  
warranty claim, please get in touch, by telephone, with our service  
department. Only in this way can a post-free dispatch for your  
goods be assured.  
NOTE  
The warranty adjustment is valid only for material or manu-  
facturing defects not, however, for transport damage, wear  
and tear or for damage to breakable parts, i.e. switches or  
rechargeable batteries.  
This product is for private use only and is not intended for commer-  
cial use. The warranty is void in the case of abusive and improper  
handling, use of force and internal tampering not carried out by  
our authorised service branch.  
SRD 250 A1  
19  
Appendix  
Your statutory rights are not restricted in any way by this warranty.  
The warranty period will not be extended as a result of warranty  
adjustments. This applies also to replacement and repaired parts.  
GB  
IE  
Damage and defects potentially present at the time of purchase  
must be reported immediately after unpacking or, at the very least,  
two days after date of purchase.  
After expiry of the warranty period incidental repairs are subject  
to payment.  
Service  
Service Great Britain  
Tel.: 0871 5000 720 (0.10 £/Min.)  
Service Ireland  
Tel.: 1890 930 034  
(0,082 EUR/Min., (peak))  
(0,064 EUR/Min., (off peak))  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
SRD 250 A1  
20  

Sony BDX S500U User Manual
Sharp IM DR410E User Manual
Sharper Image CD Stereo User Manual
SanDisk SDUSB 101 1024 User Manual
Samsung Spinpiont M8 ST640LM001 User Manual
Samsung GT E2121B User Manual
Sagem segam MY X6 2 User Manual
PYLE Audio PYLE Plus Series PLCD67 User Manual
Pirelli Cell Phone DP L10 User Manual
Philips HD7811 User Manual