Siemens Cell Phone S65 User Manual

mobile

Issued by

Information and Communication mobile

Haidenauplatz 1

D-81667 Munich

Rights of modification reserved.

Siemens Aktiengesellschaft

www.siemens-mobile.com

S65

Table of Contents

Con-

Safety precautions ..................... 3

Overview of phone .................... 5

Display symbols ......................... 7

Getting started ........................... 9

Insert SIM card/battery ............. 9

Inserting an

Phonebook ...............................36

New entry ..............................3 6

Call (search for an entry) ........3 7

Change entry .........................3 7

<S pecial books> .....................3 8

Call records ...............................3 9

Durat/charges ...........................4 0

Camera .....................................4 1

Ph oto mode ...........................4 2

Video mode ............................42

Inbox ........................................4 4

SMS ...........................................4 5

Write/send ..............................4 5

Read .......................................47

Setting ...................................49

MMS .........................................5 1

Create ....................................5 1

Templates ..............................5 3

Send ......................................5 4

Receive ..................................5 5

Read .......................................56

Se tting ...................................5 7

E-mail ........................................5 9

Write ......................................5 9

Receive/read ...........................60

Setting ...................................61

Voice message/mailbox ............62

RS MultiMediaCard ................. 10

Charge battery ....................... 11

Switch on/off, PIN entry ........... 13

Entering the PIN ..................... 13

Emergency number (SOS) ...... 13

General instructions ................ 14

Standby mode ....................... 14

Signal strength ...................... 14

Digital Rights Mgmt. (DRM) .... 14

Main menu ............................ 14

Standard functions .................. 16

Highlighting mode ................. 17

Menu speed dialling ............... 17

Security .................................... 18

Codes .................................... 18

Preventing accidental

activation ............................... 19

Text entry ................................. 20

Calling ...................................... 24

My items .................................. 30

Default book ............................ 31

Addressbook ............................ 32

New entry .............................. 32

Change entry ......................... 34

Call entry ............................... 34

Groups ................................... 35

See also Index at the end of this User Guide

Table of Contents

Inst. message ........................... 63

Start menu ............................. 63

Contact lists ........................... 64

Start Inst. message ................. 67

Msg. history ........................... 68

Setting ................................... 68

CB services ............................... 70

Text zoom .............................. 70

Surf & fun ................................. 71

Internet ................................. 71

Bookmarks ............................. 73

Games and Applications ......... 74

Downl. assis. .......................... 74

Setup ........................................ 76

Profiles .................................. 76

Themes .................................. 78

Display ................................... 79

Ringtones .............................. 81

Call setup ............................... 83

Phone setup ........................... 85

Clock ..................................... 87

Connectivity .......................... 88

Security ................................. 94

Network ................................ 96

Accessories ............................ 98

My menu .................................. 99

Fast access ............................. 100

Speed dialling keys ............... 101

Organiser ............................... 102

Calendar .............................. 102

Appointments ...................... 103

Tasks ................................... 104

Notes ...................................1 05

Missed appts. .......................1 05

Dictating mac .......................106

Ti me zones ...........................107

Extras ......................................1 08

SIM services (optional) .........1 08

Alarm clock ..........................108

Sound recorder .....................109

Calc. .....................................1 10

Unit converter ......................1 10

Stopwatch ............................1 11

Countdown ..........................1 12

Remote synchronisation .......112

Media player ...........................1 14

My stuff ..................................1 15

RS MultiMediaCard ...............1 16

Mobile Phone Manager ..........1 17

Questions & Answers .............1 19

Customer Care ........................1 22

Care and maintenance ...........1 24

Product data ...........................1 25

Accessories .............................1 26

Quality ....................................128

Guarant ee certificate (UK) .....1 29

Guarantee certificate (IRL) .....130

SAR – European Union

(RTTE) .....................................1 31

SAR – Int ernational

(ICNIRP) ..................................133

Menu tree ...............................134

Index .......................................140

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with

legal requirements and local

restrictions when using the

phone. For example, in aero-

planes, petrol stations, hospitals

or while driving.

Do not use an optical magnifier

to look at the activated infrared

interface [Class 1 LED product

(classification cas per

IEC 60825-1)].

The SIM card and the RS Multi-

MediaCard can be removed.

Caution! Smallchildren could

swallow these parts.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids

or pacemakers. Keep at least

20 cm between phone and

pacemaker. When using the

mobile phone hold it to the ear

which is further away from the

pacemaker. For mor e i nformation

consult your doctor.

The mains voltage specified on

the power supply unit (V) must

not be exceeded. Otherwise

the charging device may be

destroyed.

Do not open the phone. Only the

battery or SIM card and

Ringtones (p. 81), message

tones (p. 85) and handsfree tal-

king (p. 26) are reproduced

through the loudspeaker. Do not

hold the phone to your ear when

it rings or when you have

switched on the handsfree func-

tion. Otherwise you risk serious

permanent damage to your

hearing.

RS MultiMediaCard may be

replaced. Any other changes to

this device are strictly prohib-

ited, as they will invalidate the

type approval required for oper-

ation of the unit.

Only use original Siemens

batteries (100 % mercury-free)

and charging devices. Other-

wise you risk serious damage to

health and property. The battery

could explode, for instance.

Safety precautions

Important

Please dispose of unwanted

batteries and phones as permit-

ted by the laws in your country.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Use only Siemens original

accessories. This will avoid

potential risks to health or prop-

erty and ensure compliance with

all relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to

Siemens original accessories.

Overview of phone

A Call key

During a call:

Dial displayed/highlighted phone num-

bers/names, take calls. In standby

mode, show last phone numbers

dialled.

Set volume.

Call options.

On/Off/End key

• Switched off: press and hold to

switch on.

• During a conversation or in an appli-

cation: press briefly to finish.

• In menus: press briefly to go back a

level.

Z £ X

Press and hold to return to standby

Service providers

mode.

• In standby mode: press and hold to

switch off phone.

Joystick

01.05.2004 10:10

Inbox í New SMS

Press the joystick down verti-

cally to start an application or

function. The current function is

displayed between the soft keys

p. 15.

In standby mode:

Open main menu.

Open user profiles.

Open Phonebook/

Addressbook.

Soft keys

Open Inbox.

The current functions of this key are

Start the camera.

shown in the bottom line of the displays

as §Text§/symbol (e.g.

In lists, messages and menus:

Internet

Access to the Internet portal.

Scroll up and down.

Back one level.

Overview of phone

Integrated antenna

Do not obstruct the phone above the

battery cover unnecessarily. This

reduces the signal quality.

Loudspeaker

Z £ X

kl Plus-minus key

• During a call: volume high – low.

• In menus, lists, Internet sites: scroll up

and down.

Service providers

In standby mode:

01.05.2004 10:10

Press and hold:

Inbox í New SMS

k Sound recording (press and hold).

l Activate camera.

Press briefly in standby mode.

k Play back last sound recording.

l Query before activating camera.

Display

Infrared interface (IrDA)

* Ringtone

• Press and hold in standby mode:

switch acoustic signals on/off (except

for alarm clock).

• Press and hold when incoming call is

received: switch off ringtone for this

call only.

Key lock

Press and hold in standby mode:

switch key lock on/off.

Connection socket

For charger, headset, flash, etc.

Slot for RS MultiMediaCard

Car kit holder

Connection for external antenna

Camera lens

Display symbols

Display symbols (selection)

Auto answer feature on

Activated and available

Registered

Strength of receiving signal

Charging

Battery charge level, e.g. 50%

Temporarily interrupted

Browser offline

Phonebook

Call records

Browser online

Surf & fun/

Service provider portal

Browser via GPRS online

Browser no network

IrDA activated

Organiser

Messages

IrDA transmission

Bluetooth™ activated

Bluetooth™ transmission

Camera

Extras

My stuff

Events (selection)

Setup

SMS memory full

All calls are diverted

Ringer (beep) off

Short ring (beep) only

MMS memory full

Phone memory full

No network access

Missed call

Ringtone only if the caller is

stored in the Phonebook

Memory assistant

Alarm set

Keypad locked

Display symbols

Message symbols (selection)

Camera symbols

Unread

Read

Switch to photo mode

Switch to video mode

Brightness

Draft

Sent

Zoom factor

MMS not sent

MMS notification received

MMS notification read

White balance

Flash connected

MMS with DRM contents

(p. 14)

E-mail forwarded

{

E-mail with attachment

Voice mail received

Getting started

The phone is packaged in dismantled

form and must be re-assembled prior

to using for the first time.

^{• Press the grooved area}1, then

push the battery cover towards

the front in the direction indicated

^{by the arrow}2.

Your phone's

display is sup-

plied with a

protective film.

Remove this film

slowly before

assembling the

phone.

In rare cases,

static discharge

may cause dis-

colouration at the edges of the dis-

play. However, this will disappear

within approx. 10 minutes.

• Place the SIM card flat in front of

the slot with the contact surface

facing downwards. Then push the

SIM card in using gentle pressure

3 (ensure that the chamfered

corner is in the correct position).

Insert SIM card/battery

The service provider supplies you

with a SIM card on which all the

important data for your line is

stored. If the SIM card has been

delivered in credit-card size, snap the

smaller segment out and remove

any rough edges.

Getting started

• Insert the battery sideways into

^{the phone}4, then press it down-

^wards5 until it clicks into posi-

tion.

Inserting an

RS MultiMediaCard

When delivered, the RS MultiMedia-

Card is not yet in the phone.

• To insert the RS MultiMediaCard,

^{fold the cover out and down}1.

• Open the cover completely, then

insert the RS MultiMediaCard with

the contact surface facing down-

^wards2. Gently push the card

right in until it clicks into place.

• To remove the battery, pull it out

with the retaining tab on the side.

• Place the cover in position and

^{push it towards the front}6 until

it latches into place.

Additional information

Please switch off your phone before

removing the battery!

The phone supports 1.8 V and 3 V SIM

cards. Please contact your service provider

if you have an older card.

Getting started

• If necessary, use the battery

^cover3.

Charge battery

Charging procedure

The battery is not fully charged

when delivered. Plug the charger

cable into the bottom of the phone,

plug the power supply unit into a

mains power socket and charge for

at least two hours.

• Finally, close the cover again.

• Before removing the RS MultiMedia-

Card, carry out the Eject card func-

tion in the My stuff options menu.

This prevents any possible data

loss.

Display during charging.

Charging time

• To remove the RS MultiMedia-

Card, open the cover and press the

card briefly (if necessary, use the

battery cover). The card will pop

out a little and you can remove it.

Finally, close the cover again.

An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be

exceeded.

Getting started

Operating times

Display while in service

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Charge level display during opera-

tion (empty – full):

V W X

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/dis-

charging cycle. Therefore do not

remove the battery unnecessarily, and

where possible, do not end the

Talktime: 100 to 300 minutes

Standby time: 60 to 250 hours

Charge icon not visible

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case, the battery

is fully charged after 3 to 4 hours.

charging process prematurely.

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Only use the plug-in power supply unit

included in delivery!

Switch on/off, PIN entry

Switching phone on/off

Switching your phone on

for the first time

Press and hold the On/Off/

End key.

Time/date

Set the clock correctly on a one-off

basis when getting started.

Entering the PIN

The SIM card can be protected with

a 4 to 8-digit PIN.

Press this key, then select

§Change§.

Enter the PIN using the

number keys. The charac-

First enter the date (day/

month/year), then the

time (24 hours, including

seconds).

ters

appear to

****

ensure nobody can read

your PIN on the display.

Correct with ] .

Press. The time and date

are updated.

Confirm by pressing the

joystick. Logging on to

the network will take a

few seconds.

Time zones

Set the time zone for your area.

Select the city in the

desired time zone from

the list ...

Additional information

Change PIN.......................................p. 18

Clear SIM card barring ......................p. 19

§Set§

... and set it.

Copy SIM addresses

Emergency number

(SOS)

The first time the SIM card is insert-

ed, the entries on it can be copied to

the Addressbook. Please do not inter-

rupt this procedure. During this time,

do not accept incoming calls. Follow

the instructions in the display.

Only to be used in real emergencies!

By pressing the §SOS§ soft key you can

make an emergency call on any net-

work without a SIM card and without

entering a PIN (not available in all

countries).

You can also copy data from the

SIM card at a later time (p. 37).

General instructions

Standby mode

Main menu

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the dis-

play.

The main menu is displayed graphi-

cally with symbols:

Call main menu up from

standby mode.

Press and hold the On/Off/

Select the application

symbols.

End key to return to

standby mode from any

situation.

Start an application.

Main menu options

Signal strength

§Options§

Open menu.

Strong receiving signal.

Different functions are available

depending on the context.

A weak signal reduces the

[

voice quality, can cause

the connection to be lost,

and consumes more cur-

rent. Change your

Big letters

Illumination

Eject card

Select one of two font

sizes.

Set display illumination to

brighter/darker.

location.

Allows the RS MultiMedia-

Card to be removed without

loss of data.

Digital Rights Mgmt.

(DRM)

Help

Display a help text.

Remember that your phone has Dig-

ital Rights Management. The use of

downloaded pictures, sounds or

applications can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only, the

number of times it can be used etc.

(see also p. 75).

General instructions

Symbols

The following symbols are used to

explain operation:

User guide

Menu controls

The steps needed to reach a function

are shown in a condensed form in the

user guide, e.g. to display record of

missed calls in condensed form:

Enter numbers or letters.

On/Off/End key

Call key

C ¢ ¢Calls missed

This comprises the following steps:

Soft keys

< >

Open main menu.

_SelectP_{, then the Calls}

missed function.

Displays a soft-key func-

tion.

§Menu§

Press vertically down on

the joystick (to call up the

menu, for example).

Confirm.

Press the joystick in the

direction indicated.

D F E

Function dependent on

service provider. May

require special

registration.

Press joystick

The symbol in the centre of the lo-

wer line of the display shows the cur-

rent function when the joystick is

pressed down vertically.

Display menu

Take photos

Zoom

Call, accept call

Cancel

Standard functions

Option menus

Text input T9 preferred: Activate/

(p. 20)

deactivate T9 input.

Functions which appear repeatedly

in the options menu are listed here.

Input language: Select

language for text.

§Options§ Open menu.

Rename

Capacity

Attributes

Rename selected entry.

Display memory capacity.

Edit

Open the entry to edit.

Display entry.

View

Display properties of the

highlighted object.

Delete/

Delete all

Delete entry/delete all

entries after confirmation.

Help

Display help text.

New entry

Send...

Create new entry.

Selecttransmissionservice

and medium for sending or

printing e.g. IrDA or Blue-

tooth.

Reply/

Reply to all

The sender becomes the

recipient, “Re:” is placed in

front of the subject matter

and the received text is

transferred to the new mes-

sage.

Save

Save entry.

Save to 9

Save recipients in the cur-

rent address directory.

Sort

Set sort criteria (alphabeti-

cal order, type, time).

Standard functions

Highlighting mode

With some applications (e.g. Phone-

book/Addressbook), you can high-

light one or more entries in a list in

order to carry out a function jointly.

Menu speed dialling

All menu functions are numbered

internally. A function may be

selected directly by entering these

numbers in sequence.

§Options§

E.g., to write new SMS (from

standby mode):

Open menu.

Mark

Activate highlighting

mode.

Press to display the main

menu. Then press

If a non-highlighted entry is selected,

this can be highlighted:

for Messages, then

for Create new, then

for SMS.

§Mark§

The current entry is high-

lighted.

If a highlighted entry is selected, the

highlighting can be deleted:

§Unmark§ Remove highlighting

from the current entry.

Additional highlighting functions:

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

highlighted entries.

Delete

marked

All highlighted entries are

deleted.

Security

The phone and SIM card are pro-

tected against misuse by several

security codes.

C ¢_¢T_Selec¢_{t f}S_ue_nc_cu_tr_ioity_n¢_.Codes

PIN control

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone.

Some service providers do not per-

mit deactivating the control.

Keep these security codes in a safe

place where you can access them again

if required.

Codes

Protects your SIM card

(Personal Identification

Number).

§Select§

Press.

Enter PIN.

Confirm input.

PIN2

This is needed to set the charge

detail display and to access

additional functions on special

SIM cards.

§Change§ Press.

PUK

PUK2

Confirm.

Key code. Used to unlock SIM

cards after the wrong PIN has

been entered repeatedly.

Change PIN

Phone

code

You can change the PIN to any 4 to

8-digit number you find easier to

remember.

Protects your phone. Must be

entered at the first security set-

ting.

Enter current PIN.

Press.

_,C

Enter new PIN.

Repeat new PIN.

Security

C ¢_¢T_Selec¢_{t f}S_ue_nc_cu_tr_ioity_n¢_.Codes

Change PIN2

(Display only if PIN2 is available).

Proceed as for Change PIN.

Preventing accidental

activation

Even if PIN control is deactivated

(p. 18) confirmation is required to

switch on the phone.

This prevents accidental activation

Chg.phonecode

(Change phone code)

of the phone, e.g. when you are car-

rying it in a bag or when you are trav-

elling in an aircraft.

You define the phone code (4 to 8

digits) when you call up a phone-

code protected function for the first

time (e.g. Direct call, p. 28). It is then

valid for all phone-code protected

functions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. If this occurs, contact

Siemens Service (p. 122).

Press and hold.

Press. The phone switches

on.

§Cancel§

Press this key or take no

action. The phone does

not switch on.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the SIM

card in accordance with the instruc-

tions. If the PUK (MASTER PIN) has

been lost, please contact your serv-

ice provider.

Text entry

Press briefly: special char-

acters are shown.

Text entry without T9

Press the number key repeatedly

until the required character appears.

After a brief interval the cursor will

advance. Example:

Press and hold: open input

menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Press once briefly to write

the letter a, twice to write

b etc.

Press and hold: writes 0.

Writes blank. Press twice

= line break.

Press and hold to write the

number.

Ä, ä, 1–9 Unusual characters and

numbers are displayed

Special characters

Press briefly. The symbols

chart is displayed:

after the relevant letters.

Press briefly to delete the

]

letter before the cursor.

Press and hold to erase the

whole word.

)

’

;

(

)

]

[

{

}

€

Move the cursor

(forwards/back).

∆

Ω

Press briefly: Swap

between abc, Abc, abc,

Abc, ABC, 123. Status

) Line break

shown in top line of dis-

play.

Navigate to characters.

Confirm.

Press and hold: all input-

variants are displayed.

Text entry

Writing with T9

The display changes as you proceed.

Input menu

For text input:

It is therefore best if you finish a word

without looking at the display.

Simply press the keys once where the

relevant letter is located. For “hotel”,

for example:

Press and hold. The input

menu is displayed:

Text format (SMS only)

Input language

Mark

Copy/Insert

Press briefly for ^T9Abc then

4 6 8 3 5

Text entry with T9

“T9” deduces the correct word from

the individual key entries by making

comparisons with an extensive dic-

tionary.

A blank ends a word.

Do not use special characters such as

Ä. Use standard characters instead,

e.g. A; T9 will do the rest for you.

Activate, deactivate T9

§Options§ Open text menu.

Text input Select.

T9 Text Input is licensed under one or more of

the following:

U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945 928 and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

T9 preferred

Select.

§Change§ Activate T9.

Select input language

Select the language in which you

want to compose your message.

§Options§ Open text menu.

Text input Select.

Input language

Select.

§Select§

Confirm. The new lan-

guage is set. Languages

with T9 support are

marked with the T9 sym-

bol.

Text entry

T9 word suggestions

Correct a word

If several options are found in the

dictionary for a key sequence (a

word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

Move left or right, word

by word, until the

required word is

§highlighted§.

Scroll through the T9

word suggestions again.

]

The word must be shown

§highlighted§. Then press

Deletes the character to

the left of the cursor and

displays a new possible

word.

Press. The displayed word

is replaced with a differ-

ent word. If this word is

also incorrect, press

again.

Additional information

Within a “T9 word“, individual letters may

not be edited without first removing the T9

status. In most cases it is better to rewrite

the complete word.

Press. Repeat until the

correct word is displayed.

If the word you want is not in the dic-

tionary, it can also be written with-

out T9.

Set a full stop. The word is

concluded if it is followed by a

space. Within a word, a full

stop represents an apostro-

phe or hyphen:

To add a word to the dictionary:

§Spell§

Select.

e.g. §provider.s§ = provider’s.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Moving the cursor to the right

ends the word.

Press briefly: switch

between: abc, Abc, ^T9abc,

^T9Abc, 123. Status shown in

top line of display.

Press and hold: all input var-

iants are displayed.

Press briefly: select special

characters (p. 20).

Press and hold: opens input

menu (p. 21).

Text entry

Use text modules

Text modules

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS, e-mail).

Write message

(SMS, MMS, e-mail).

§Options§ Open text menu.

Write text modules

C ¢M ¢Text modules

§Insert§

Select.

Select Text modules.

§Options§ Select New text.

Select text module from

the list.

Write text.

§Select§

Confirm. The text module

is displayed.

§Options§ Open menu and select

Save. Accept the sug-

gested name or allocate a

new one.

Confirm. The text module

is inserted in the message

to the right of the cursor.

Save.

Calling

Dialling with number

keys

Set volume

It is only possible to adjust the vol-

ume during a call.

The phone must be switched on

(standby mode).

With the joystick.

Enter the number (always

with area/international

dialling code).

With the plus/minus key.

] A short press clears the

last digit, a long press

clears the entire phone

number.

If a car kit is used, its volume setting

will not affect the usual setting on

the phone.

Press the Call key. The dis-

played phone number is

dialled.

Redial previous numbers

To redial the phone number last

called:

Press the Call key twice.

End call

To redial other numbers that were

dialled previously:

Press the End key briefly.

Press this key even if the

person on the other end

of the line has hung up

first.

Press the Call key once.

Pick out the phone

number from the list,

then to dial press the …

... key.

Calling

Reminder

If the number is busy

§Prompt§ A beep reminds you to

redial the displayed

phone number after

15 minutes.

If the called number is busy or can-

not be reached because of network

problems several options are availa-

ble (depending on the service pro-

vider). An incoming call or any other

use of the phone interrupts these

functions.

Additional information

Store phone number in the

Addressbook/Phonebook.

Either

§Handsfr.§ Switch on Handsfree (play-

back from loudspeaker).

Auto. redial

Press and hold to switch

microphone off.

§Auto dial§ The phone number is

automatically dialled ten

times at increasing time

intervals. End with:

International dialling codes

Press and hold until a “+” is

displayed.

B End key.

§Country§ Press and select country.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Call back

§Call back§ Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

Calling

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Handsfree

You can put the phone down during

a call. You can then hear the caller

via the loudspeaker.

Press.

§Handsfr.§ Activate handsfree talk-

ing.

Press.

Switch on.

A phone number transmitted by the

network plus the corresponding

name (possibly with a picture) are

displayed if they are stored in the

Phonebook/Addressbook (p. 33).

/kl Regulate the volume with

the joystick or the

plus/minus key.

§Handsfr.§ Deactivate.

Warning!

Reject call

Always switch off “handsfree talking”

before holding the phone to your ear!

Otherwise, you will damage your hearing!

§Reject§

Press.

Press briefly.

Warning!

Swap between 2 calls

Establish a second connection

You can call another number during

a call.

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Open call menu.

Additional information

Hold

The current call is put on

hold.

Press and hold to switch off

the ringtone and silent alert.

Now dial the new phone

number or select

Missed call display.

C Open the call menu,

then select Default book,

and then select the phone

number.

Calling

When the new connection is

established:

End call(s)

Press the End key.

After the Return to held call? display,

§Swap§

Swap between calls.

Incoming calls during a call

you have the following selection:

You may need to register for this

service with your service provider

and set your phone accordingly

(p. 83). During a call, you may be

advised that there is another call

waiting. You will hear a special tone

during the call. You have the follow-

ing options:

§Yes§

You accept the call on

hold.

§No§

You end the second call

too.

Conference

Call up to 5 parties one by one and

link them together in a multiparty

call. Some of the functions described

may not be supported by your serv-

ice provider or may have to be ena-

bled specially.

• Accept the waiting call in addition to

the first

§Swap§

Accept the waiting call,

putting the current call on

hold to do so.

A connection has already been

established:

Always proceed as above to swap

between the two calls.

Open the call menu and

select Hold. The current

connection is maintained.

• Reject the waiting call

§Reject§

Press.

Now dial a new number.

When the new connec-

tion is established ...

§Divert§

The waiting call is

diverted, for example, to

the mailbox.

... Open the call menu and

select Conference. The

held call is joined.

•

Accept the waiting call and end the

current call

End the current call.

Repeat procedure until all partici-

pants are linked together (up to

5 participants).

Accept new call.

Calling

End

Call transfer

Connect the original call to

a second call. For you,

All calls in the conference

are ended when you press

the End key.

both calls are now ended.

Main menu

Call status

Access to the main menu.

List all held and active calls

(e.g. participants in a con-

ference).

Call options

The following functions are only

available during a call:

Press.

Direct call

If this is active, only one number can

Hold

Hold current call.

be dialled.

Microphone

If switched off, the person

on the other end of the line

cannot hear you (muting).

Switch on

C ¢_¢DT_irect¢_caS_llecurity

Also:

Press and hold.

Handsfree

Playback through the loud-

speaker.

Confirm selection.

Enter phone code.

Volume

Adjust handset volume.

Phonebook/Addressbook.

(p. 27)

Default book

Conference

Time/charge

When first prompted you define and

enter the phone code (4–8 digits).

Confirm selection.

Display talktime that has

elapsed so far and (if set)

charges incurred during

the connection (p. 40).

Please do not forget this code (p. 18)!

Select phone number

from the Phonebook/

Addressbook or enter it.

Send DTMF

Enter tone sequences

(numbers) for remote

inquiries to an answering

machine.

Confirm.

Calling

Apply

§Carola§

Using the Phonebook/Address-

book

Store phone numbers and control

codes (DTMF codes) in the Phone-

book/Addressbook in the same way

as a normal entry.

To dial the phone number

(e.g. Carola’s phone

number), press and hold

the right soft key.

Switch off

Enter phone number.

Press and hold.

Press until a “+” appears in

Enter phone code.

Confirm input.

the display (wait for the

connection to be estab-

lished).

Enter DTMF codes

(numbers).

Tone sequences (DTMF)

You can, for example, enter control

codes (numbers) for remote access

to an automatic answering machine

while another connection exists. These

entries are transmitted directly as

DTMF codes (control codes).

If necessary, wait again

for three seconds at a

time for the receiver to

process the entries safely.

Enter a name.

§Save§

Open the call menu.

Store entry.

Send DTMF

Select.

You may also store just the

DTMFcodes (numbers) and then

send them during the call.

My items

Set your phone as you wish for the

following items:

Where do I get what?

You can purchase additional ring-

tones, logos, animations and Java

applications from your service pro-

vider or directly from Siemens.

Ringtones (p. 81)

Assign individual ringtones to caller

groups or special dates.

Pictures (p. 115)

Assign individual pictures or photos

to your Addressbook entries.

Service provider portal

Depending on your service provider,

you will find direct access to his por-

tal on your telephone via menu

items or bookmarks. Please contact

your service provider for more infor-

mation on these services.

Animations (p. 80)

Choose a start up and shut down ani-

mation as well as a personal greet-

ing.

Themes (p. 78)

Load a completely new visual pres-

entation onto your phone.

Siemens Mobile Portal

You will find additional ringtones,

logos, animations and screensavers

as well as more applications, games

and services on the Internet at:

www.siemens-mobile.com/city

Screensaver (p. 79)

Choose an analogue or digital clock,

or a personal picture.

or you can download them directly

from the Internet:

wap.siemens-mobile.com

(Operator) Logo (p. 79)

Choose an individual picture (to be

displayed in standby mode)

You will also find a service for saving

data here as well as a list of the coun-

tries in which these services are

available.

Wallpaper (p. 79)

Choose your own permanent back-

ground image.

Colour skin (p. 79)

Select a colour skin for the user inter-

face.

My menu

Create your own menu (p. 99) with

frequently used functions, phone

numbers or Internet pages.

Applications (p. 74)

Download your own applications

from the Internet.

Default book

C ¢L ¢Select function.

Phonebook

The Phonebook is located on the SIM

card. Only one phone number can be

entered per entry. The Phonebook

on the SIM card can easily be trans-

ferred into a different phone.

Show entries

The entries in the default book

(Addressbook or Phonebook) are

shown.

Select a name with the

first letter and/or scroll.

J ^/

Business card

Create your own business card to

send to a different GSM-phone. If no

business card has been created yet,

you will be asked for your input.

New entry

Create new entry.

Addressbook (see also p. 32)

Phonebook (see also p. 36)

Move from field to field to

enter your details.

§Save§

Press.

Default book

You can set which directory you pre-

fer to use.

Additional information

The content of the business card corre-

sponds to international standards (vCard).

The selected default book is opened

in standby mode with the joystick.

Copy numbers from Address-

book/Phonebook.

Open Phonebook or

Addressbook

Groups

See p. 35.

Addressbook

A lot of data can be saved in the

Addressbook for each entry and

additional functions (e.g., Birthday:,

Picture:, Inst. message) can be used.

See p. 38.

Addressbook

The Addressbook can store up to

1,000 entries, each with a variety of

phone and fax numbers as well as

additional address details. These

entries are managed in the phone

memory separately from those in the

Phonebook. However, you can

exchange data between the

Possible input fields

Last name:

URL:

First name:

Inst. message >>

Group:

Phone number:

Phone no./office: Company:

Phone no./mobile: Address: >>

Addressbook and the Phonebook on

the SIM card.

Fax:

Birthday: >>

Picture:

Fax 2:

E-mail address:

E-mail 2:

New entry

The Addressbook is set as standard:

All fields

Open Addressbook

(in standby mode).

Additional information

Group: Allocation to a group

(p. 35).

Display input fields.

Select required input

fields.

Address: Extension to enter the

complete address:

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Street:, Post code:, City:,

Country:

Com. services

Information if the entry is

being used as an Inst.

Message contact (p. 63):

At least one name must

be entered. Always enter

phone number with

dialling code.

Nickname:, WV user ID:, ICQ

number:, AIM screen name:

Addressbook

Birthday: After activation, the date

Display/find entry

of birth is entered.

Open Addressbook

Reminder: The phone

reminds you at the time

you set one day before

the birthday.

(in standby mode).

Select a name with the

first letter and/or scroll.

Display.

Picture:

Assign a picture to the

entry. This is displayed

when you are called by a

corresponding phone

number.

Display options

§Options§ The options menu only

ever offers the functions

for the currently selected

input field.

All fields/Reduced fields

Displays the number of

input fields.

Move to ...

View

Assign current entry or

highlighted entries to a

group.

§Save§

Save the entry.

Additional information

Temporary switch to Phone-

book.

Display an assigned

picture.

Copy to SIM

Copy name and one phone

number to the SIM card

(Phonebook).

Synchronisation

With the mobile phone manager (p. 117)

you can synchronise your Addressbook

with Outlook^®, Lotus Notes™ and other

Siemens phones.

New SMS,

New MMS,

New e-mail

Create a message with the

selected entry.

Using Remote syncr. you can synchronise

your mobile with an organiser stored on the

Internet (see also p. 112).

Browser

Start browser and visit

URL.

Inst.

Message

Start a dialogue with the

selected entry (p. 63).

(For standard functions see p. 16)

Addressbook

Change entry

Addressbook options

Open Addressbook

Depending on the actual situation,

different functions will be offered.

These functions can be applied to

the entry currently selected as well

as to multiple selected entries:

(in standby mode).

Select required entry.

Press.

§Edit§

§Options§ Open menu.

Select input field.

Open entry.

§Edit§

Move to ...

Assign current or high-

lighted entries to a group.

Copy to SIM

Copy name and phone

number to the SIM card

(Phonebook).

Make changes.

Save.

§Save§

Filter

Only those entries which

match the filter criteria are

displayed.

Call entry

Open Addressbook

(in standby mode).

Import

Sort

Set up readiness to receive

for a Phonebook entry via

IrDA (p. 88) or SMS (p. 45).

Select a name with the

first letter and/or scroll.

J ^/

Specify sorting criteria for

output of the Addressbook

entries.

The number is dialled.

If there are several numbers in the

Addressbook entry, these are

offered for selection.

Enter search term.

(For standard functions see p. 16)

Select phone number.

The number is dialled.

Addressbook

Ringtone for group

Assign a ringtone to a group that

plays when one of its members calls

you.

Groups

Nine groups are specified in your

phone to enable you to arrange your

Addressbook entries clearly. You can

rename seven groups.

C ¢_¢T_Group¢_caR_li_ln_sgtones

Open Addressbook

(in standby mode).

Select group.

<Groups> Select (the number of

entries is listed after the

group name).

Confirm. If a ringtone has

already been set, it will be

played. Otherwise, the

ringtone list will be dis-

played and you can select

one.

Select group.

List entries in the group

for viewing and editing.

I _{If necessary, select a}

ringtone.

Groups menu

§Options§

Open menu.

Confirm.

Rename

group

Change name of group.

Group

symbol

Assign a symbol to a group.

The symbol will then appear

in the display when one of the

group members calls.

Additional information

No group: Contains all Addressbook

entries that do not belong to a group (name

cannot be changed).

Received: Contains Addressbook entries

received by IrDA (p. 88), Bluetooth (p. 89)

or SMS (p. 45) (name cannot be changed).

Phonebook

Entries in the Phonebook (on the SIM

card) are managed separately from

those in the Addressbook. You can,

however, exchange data between

the Phonebook and the Address-

book.

Group:

Default: No group

Important phone numbers can be

put in one group (VIP). This group is

independent from groups in the

Addressbook.

Location:

Default: SIM

Special SIM cards can save phone

numbers in a protected area

(Protected SIM) (PIN2 required).

New entry

If the Phonebook has been selected

as the default book:

Open Phonebook

Record number:

(in standby mode).

Each entry is automatically assigned

a record number. You can also dial

using the record number.

Select <New entry>.

Display input fields.

§Save§

Press to store the new

entry.

Select input field.

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Additional information

Temporary switch to Address-

book.

§Country§ International dialling code...p. 25

Functions concerning Text entry .......p. 20

Phone number:

Always enter phone number with

dialling code. An entry will not be

saved without a phone number.

Name:

Enter first and/or last names.

Phonebook

Call (search for an entry) Phonebook options

Open Phonebook.

The following functions are availa-

ble, depending on the current situa-

tion.

Select a name with the

first letter and/or scroll.

J ^/

§Options§

Open menu.

Phone number is dialled.

Call using record no.

Copy into 9

Copy all highlighted

entries to the Address-

book.

A record number is automatically

assigned to every new entry in the

Phonebook.

Copy all to 9

Copy all entries to the

Addressbook.

Delete all

The whole Phonebook

is deleted (PIN-pro-

tected).

Enter record number.

Press.

Import

Set up readiness to

receive for a Phone-

book entry via IrDA

(p. 88) or SMS (p. 45).

Press.

Change entry

(For standard functions see p. 16)

Select entry in Phone-

book.

§Edit§

Press.

Select desired input field.

Make changes.

Press.

§Save§

Phonebook

There might be phone numbers

saved in your Phonebook that have

been provided by your service pro-

vider. They may be used to call local

or national information services or to

use services offered by your service

provider.

Open Phonebook

(in standby mode).

Select.

Enter “own” phone numbers in

Phonebook (e.g., fax) for informa-

tion. These numbers can be

changed, deleted and also sent as an

SMS message.

Completing phone numbers in the

Phonebook

Digits may be replaced by a “?” when

phone numbers are entered in the Phone-

book:

Display the phone numbers saved in

the VIP group.

Press and hold.

These wildcards must be replaced with

numbers before dialling (e.g., with the

extension numbers in a phone system).

To make a call, select the phone number

from the Phonebook.

Entries stored in the Phonebook on

the SIM card can also be used on

other GSM phones.

Press.

Replace “?” with numbers.

On special SIM cards, phone num-

bers can be stored in a protected

location. PIN2 is required for editing.

The phone number is dialled.

Call records

The phone number of a caller is dis-

played if

Calls missed

The phone numbers of calls that you

have received but not answered are

stored for call back purposes.

• the caller has switched off the

Hide ID function and

Symbol for missed call (in

• the network supports the

“Caller Identity” function.

standby mode). Press the

soft key beneath the sym-

bol to bring up the Inbox

(p. 44).

Alternatively, a caller’s name is dis-

played if it is stored in the Phone-

book/Addressbook.

Calls received

Accepted calls are listed.

Your phone stores the phone num-

bers of calls for convenient redial-

ling.

Calls dialled

C ¢

Access to the last numbers you have

dialled.

Select record.

Fast access in standby

Delete records

mode.

Open call record.

Select phone number.

Dial phone number.

The records are deleted.

Records menu

The records menu can be called up if

an entry is highlighted.

§View§

Display information on

the phone number.

§Options§ Open menu.

Up to 500 entries are stored in the

records:

Copy into 9/

Copy to SIM

Copy the currently

selected phone number

into the preferred direc-

tory.

(For standard functions see p. 16)

Durat./charge

You can display the charges and

duration during a call. You can set a

unit limit for outgoing calls.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

service provider to define a credit

limit or a period after which the

phone is barred for outgoing calls.

C ¢ ¢Durat./charge

Select

Last call

§Edit§

Press.

All outg. calls

All incoming

Remain. units

Charge sett.

Enter PIN2.

Account limit

Switch on.

Scroll through the display.

§Reset§

Enter number of units.

Confirm.

§OK§

Open item.

Reset the currently

selected setting.

Then confirm the credit or reset the

counter. The status display for pre-

paid cards may vary depending on

the service provider.

Charge sett.

Open menu.

Currency

Auto display

Call duration and charges are

displayed automatically.

Enter desired currency.

Personal rate

(PIN2 prompt)

Enter the currency as well as the

charge per unit and time.

Camera

You can view photos/videos record-

ed on the integrated camera imme-

diately and

The number of photos which can still

be taken in the selected resolution is

displayed in the top right-hand cor-

ner of the preview image. This

number varies considerably depend-

ing on the subject matter and how

much storage space is required.

• use the photo as a background

image, logo, a start-up/shutdown

animation or a screensaver;

• assign the photo to an Address-

book entry;

The selected resolution is indicated

beneath the preview image or, if

video mode has been selected, there

is an indication as to how much

recording time has already been

used and how much time is still

available for a video.

• send the photo/video via MMS or

e-mail;

• save the photo in My stuff (p. 115)

or on the RS MultiMediaCard

(p. 116).

è Camera

Ù Ú

Switch on

C ¢

Start camera in standby

mode.

Switch to single image

and video recording.

Premium

Options

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

Brightness

Zoom factor

White balance (p. 43)

Flash connected.

Camera

Photo mode

Video mode

Take a photo.

The video mode resolution is the

same as the preview image resolu-

tion. You can set two different reso-

lutions.

Display the preview

image for the next photo.

The photo is saved with a name, the

date and the time. To enter the

name, see Setup in the options

menu.

Start the video recording.

End the video recording.

A red dot appears in the top right of

the display while the video recording

is being made.

Settings prior to taking a photo:

Set the brightness.

Set the zoom factor.

§Play§

Plays the video recording.

Image resolution

Flash (accessories)

The quality of the image can be set in

four stages regardless of the preview

image resolution. The highest possi-

ble resolution is 1280 × 960 pixels.

If the flash is active, this is shown by

a symbol in the display. The flash is

constantly charged while connected

to the phone and switched on. This

reduces the stand-by time.

To create your own display back-

ground, select the Wallpaper resolu-

tion (p. 79).

This symbol appears

when the flash is being

charged.

The resolution may decrease

depending on the selected digital

zoom.

For settings, see options menu.

Camera

Additional information

Camera options

The following functions are availa-

ble, depending on the current situa-

tion.

Insufficient memory available.

Start the memory assistant to

delete specific data (p. 85).

Alternatively, you can transfer

data to the RS MultiMedia-

Card.

§Options§ Open menu.

Settings

• Name for recordings

• Image resolution

• Colour mode: normal,

sepia, grey tones.

• Storage medium:

My stuff (p. 115) or

RS MultiMediaCard

(p. 116)

Pictures

Display list of photos.

Display list of videos.

see also Add contact.

memb.

Search for group member.

Delete group

Delete group.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

Delete

member

Delete contact from the

group member list.

Add group

Add new group.

Search group

Search for group on the

server (also groups no

longer managed in the

list).

Inst. message

Create a new contact list

The current contact list is displayed.

§Options§ Open menu.

Contact list options

§Options§ Open menu.

Details =

Additional information

about the contact or the

group.

Contact lists

Available contact lists are

displayed.

My settings

Information on your cur-

rent personal status

(p. 69).

§Options§ Open menu.

Create

Contact list ID:

Give the contact list an

Select.

Manage

Functions for managing a

contact or a group.

unambiguous name.

Contact lists

Block listtp

Appl. settings

Suspend

Display contact lists for

selection.

Name:

Allocate self-explanatory

name.

Display all blocked con-

tacts. Can be unblocked.

Confirm.

Set the application

(p. 69).

End the application; the

server remains con-

nected.

Logout

Help

Log off from the server

and return to start menu.

Display help text.

Inst. message

Options (individual contact)

§Options§ Open menu.

Start Inst. message

A contact list must be displayed.

Select a contact or a

Send sound

Select and send a melody/

sound from the list (DRM,

p. 14).

group.

Startcommunicationwith

the contact.

Send

picture =

Select and send a picture

from the list (DRM, p. 14).

The page with the Inst.

message is displayed.

When a group is engaged

in a dialogue, the name of

the sender is placed in

front of each contribu-

tion.

Send any

Send any file.

Details

Information about the con-

tact, if they authorise this.

Clear all

Delete all texts in the cur-

rent Inst. Message.

Open editor.

Write text.

Block

contact

No more messages are

received from the contact

and the contact receives

no status information from

you.

This function works for all

your lists.

Send text. The text

appears in the Inst. mes-

sage soon afterwards.

Naturally, you can also receive mes-

sages from contacts you do not

know. This will be pointed out to you

in the display, and you can either

switch to Inst. Message or ignore/

block the contact.

Inst. message

Options (group contact)

§Options§ Open menu.

Setting

C ¢_¢M_Selec¢_{t fu}In_ns_ct._tim_oe_ns_.sage¢Setup

Account

The list of available accounts is dis-

played.

Leave group

Details

Exit group.

Information about the

group:

Group ID:, Name:, Topic:,

Owner:

Select an account to

Clear all

Delete all texts in the cur-

rent Inst. Message.

establish a connection.

<New entry>/Account sett.

Receiving objects

If sounds or pictures are sent to you

during a dialogue, you will be

informed of such in the display.

Set up an account or change the set-

tings as specified by the service pro-

vider. Depending on the service pro-

vider, the settings may not be

changeable.

§Receive§ Accept object

Name:

URL:

Name of account.

§Reject§

Reject object.

Enter URL, e.g.

http://www.abc.com

Msg. history

User ID:

Enter an unambiguous

user (login) name.

C _¢¢M_{Msg. h}¢_isI_tn_os_ryt. message

Password:

Enter password (shown as

a series of asterisks).

The messages from the last meeting

are displayed. You can read and

delete the contributions.

Requirement: The server must be

disconnected, see Suspend (p. 66)

and Automatic login: (p. 69).

Inst. message

My settings

Appl. settings

Information on your current per-

sonal status:

Settings for the application used:

Automatic

Auto-reconnect to the

last account used.

Alias:

Your own alias under which

you can be found on the

server.

Timeout:

Time without action after

which the application is

terminated. However,

the server remains con-

nected.

Screen

name:

Name to be displayed in

the group.

Mood:

Information about your own

mood, e.g.

Message info:/

Online info:

Signal the receipt of

messages: Yes/No

Happy, Sad, Sleepy etc.

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows

authorised: Yes/No

Status text:

Availability:

General text information,

e.g. “Am at home”.

Availability:

Available, Not available,

Discreet

Mobile:

Enter the phone number

with international dialling

code.

§Options§ For each setting, specify

who is allowed to view

your personal informa-

tion:

Public

All contacts.

Private

Contacts designated as

Friend: (p. 64).

Hidden

Nobody.

CB services

C ¢M ¢Setup¢CB services

Topic

Select

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

you will receive messages on the

activated topics in your Topic list.

§Options§ Open list menu.

If a topic is selected in the list you

can view it, activate/ deactivate it,

edit it or delete it.

CB languages

CB messages are displayed in

standby mode; longer messages are

scrolled automatically.

Receive Cell Broadcast messages in

only one specific language or in all

languages.

Receive CB

Displays

Ö, Õ

You can activate and deactivate the

CB service. If the CB service is acti-

vated, standby time for the phone

will be reduced.

Topic activated/deactivated.

New messages received on

the topic.

Messages already read.

Topic list

You can add any topics to this per-

sonal list from the topic index. You

can preset 10 entries with their

channel numbers (ID) and, if applica-

ble, with their names.

Text zoom

You can set three fixed sizes for the

presentation of the display texts

across the entire message range:

New topic Select.

Standard Medium font size

• If no topic index is available, enter

a topic with its channel number

and confirm with §OK§.

Zoom +

Zoom -

Large font

Small font

• If the topic index has already been

transmitted, select a topic and

activate it with §Options§.

Surf & fun

Obtain the latest information from

the Internet that is specifically

adapted to the display options of

your phone. In addition, you can

download games and applications to

your phone. Internet access may

require registration with the service

provider.

Browser menu

§Options§ Open menu.

Homepage

Call up the pre-set

homepage for the current

profile.

Bookmarks

List bookmarks

Display list of bookmarks

stored in the phone.

Access to the service

provider

Bookmark site

The current page is saved

as a bookmark.

Direct call-up of the browser with

the URL from your service provider.

Go to...

Enter URL to dial an Inter-

net address directly, e.g.

wap.siemens-

mobile.com

Internet

Reload

Reload current page.

C ¢ ¢Internet

The browser is activated with the

pre-set option as soon as you call up

the function (Browser settings, p. 72;

may be specified/pre-assigned by

service provider).

Show URL

Display the URL of the

page currently loaded for

sending via SMS/MME/

e-mail.

History

Display most recently vis-

ited Internet sites.

Disconnect

File

Disconnect the Internet.

Save object on the current

page or save the com-

plete page; display saved

pages.

Setup

Set or reset browser

(p. 72).

Exit browser

Close the browser.

Surf & fun

End connection

Browser settings

Press and hold to clear

down the connection and

close the browser.

C ¢ ¢Internet

§Options§ Open menu.

Setup

Select.

Navigation in the browser

• Select a link.

• Settings, status on/off.

Browser

Set start option as well as

handling of pictures and

sounds plus send options.

• Press briefly: one page back.

Profiles

The list of profiles is dis-

played for activation/setting.

For more information, con-

tact your service provider.

• One input field/link forward/back.

• Scroll one line.

Display symbols in the browser

(selection)

Protocol

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

parameters

Connect

Network

No network

Security

Context

Set encryption.

GPRS online

Reset session; delete

cache, history and cookies.

Enter special characters

Tableofspecialcharacters

(p. 20).

Your Internet browser is licensed by:

List of special characters,

depending on the situa-

tion.

Surf & fun

Profiles

Bookmarks

Preparation of the phone for Internet

access depends on the service pro-

vider concerned:

C ¢ ¢Bookmarks

Display URL/call up page

List bookmarks

Profil pre-set

In most cases, access profiles have

already been created for one or more

service provider(s).

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Select profile.

Activate profile.

Save

Set profile manually

If necessary, please contact your

service provider.

Bookmark site

The current page is saved

in the phone as a book-

mark.

§Options§ Open menu.

Edit

Start processing. For the

Internet-specific settings

below, please contact your

service provider.

Bookmark options

§Options§ Open menu.

Here you will find functions for

Delete

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

Delete selected profile.

Surf & fun

Download new

Games and Applications

Select a service provider

or URL.

Games and applications are offered

on the Internet. Once downloaded,

you can access these via the phone.

Most applications include instruc-

tions. Some applications and games

are already pre-installed on your

phone. You will find these described

under

Start the browser and visit

the URL.

Description file only

The description file is

loaded for information

purposes only. The appli-

cation/game itself must

be loaded separately.

www.siemens-mobile.com/s65

Requirements

or complete download

Browser profile (p. 72) and access

(p. 92) must be configured already.

The application/game is

completely loaded.

Download

Select the correct access depending

on whether you are loading games

or applications:

Apply

Remember that applications/games

may be protected (DRM, p. 14).

C ¢O¢Games

The executable applica-

tion is saved on the phone

and can be started

immediately.

C ¢O¢Applications

In addition to URLs and service pro-

viders for the download, any availa-

ble applications/games and folders

will be displayed.

Downl. assist.

C ¢O¢Downl. assist.

You will not be left on your own dur-

ing the download!

Surf & fun

Additional information

You ccan download applications such as ring-

The joystick is generally used for games.

The following key control may be used as

an alternative (virtual joystick):

tones, games, images, animations etc. from the

Internet. Downloading or running applications will

not affect or change the software already

installed on your Java™-enabled mobile phone.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

purchaser bears sole risk for the loss of, damage

to, and any defects arising in, this device or the

applications and for any direct damage or conse-

quential damage of whatever nature resulting

from the use of this application.

4 6

7 9

Games&More options

Processing and managing your appli-

cations and folders:

For technical reasons, such applications and sub-

sequent enabling of certain functions are lost in

the event of the device being replaced/re-sup-

plied and may be lost if it is repaired.

In such cases, the buyer is required to download

or release the application again. Please remem-

ber that your phone has Digital Rights Manage-

ment (DRM) so that individual applications down-

loaded from the Internet are protected against

unauthorised reproduction. These applications

are then exclusively intended for your phone and

cannot be transferred from this even to create a

backup.

Move

Move applications between

folders.

New folder

Reinstall

Create and name new

folder.

Reinstall an application

(update).

Siemens does not warrant, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. If technically possible, back up your

applications to a PC with the “mobile phone man-

ager”, p. 117.

Security

Reinstall

Select a security level.

Repeat after transmission

error.

Attributes

Show details of the applica-

tion/folder (name, version,

size, path, producer, date).

HTTP

profile

Display profile list for

activation/setting

(For standard functions see p. 16)

Setup

Profile settings

Edit a default profile or create a new

personal profile:

Profiles

C ¢T ¢Profiles

Several settings can be stored in a

phone profile in order, for example,

to adapt the phone to the surround-

ing level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Five standard profiles are provided

with default settings. They can be

changed however:

Select.

The list of available functions is dis-

played.

Normal environment

Quiet environment

Noisy environment

Car Kit

When you have finished setting a

function, return to the profile menu

where you can change a further set-

ting.

Headset

Additional information

• You can set two personal profiles

(<Name>).

Call up the list in standby mode:

The profile list is displayed.

The active profile is identified with ·.

• The special profile Aircraft mode is

fixed and cannot be changed.

Switch on

Select default profile or

personal profile.

Switch on profile.

Setup

Profile options

Aircraft mode

§Options§ Open menu.

All alarms (appointments, alarm

clock) are deactivated. This profile

cannot be modified.

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Switch on

Scroll to Aircraft mode.

Copy settings from

another profile.

Confirm selection.

Rename

Change personal profile

(except default profiles).

Confirm safety inquiry

again in order to activate

the profile. The phone

switches itself off auto-

matically.

Car Kit

If an original Siemens car kit is used,

the profile is switched on automati-

cally when the phone is inserted into

the cradle (also see accessories).

Normal mode

When you switch on your phone

again, the previously set profile will

be reactivated automatically.

Headset

The profile is only switched on auto-

matically if an original Siemens

headset is used (also see accesso-

ries).

Setup

Themes

C ¢T ¢Themes

Load a completely new visual pres-

entation onto your phone. At the

press of a key various functions are

re-organised on a theme basis, e.g.

Start up/shut down animation, wall-

paper, screensaver, start up/shut-

down melody, additional anima-

tions.

Theme files are compressed to save

memory space. After being down-

loaded (p. 74) or called up from

My stuff, these are automatically

unzipped when activated.

Activating a new theme

Select theme.

Display theme preview.

Activate new theme.

Setup

Wallpaper

Set wallpaper graphic for the display.

Display

C _¢¢_ST_elec¢_{t f}D_ui_ns_cp_tl_ia_oy_n.

Logo

Language

Choose graphic to be displayed

instead of the provider logo.

Set the language for the display text.

When “automatic” is set, the lan-

guage of your home service provider

is used.

Colour skin

Select colour skin, incl. background

image for the entire user interface.

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

Screensaver

After a specifiable time, the screen-

saver shows a picture in the display.

An incoming call and/or pressing any

key will end the function except if

the safety function is activated.

_{# 0 0 0 0 #}A

Text input

Preview

Display the screensaver.

T9 preferred

Activate/deactivate intelligent text

entry.

Style

Select Analogue clock, Digital clock,

Bitmap, Energy saving

Input language

Select language for text entry. Lan-

guages with T9 support are marked

with the T9 symbol.

Bitmap

Select image in My stuff.

Setup

Timeout

Own greeting

Set period after which the screen-

saver starts.

Enter greeting to be displayed

instead of animation when phone is

switched on.

Security

The phone code is requested to close

the screensaver.

Big letters

You can choose between two font

sizes for the display.

Auto key lock

Automatic keypad locking if no key

has been pressed for one minute in

standby mode.

Illumination

Set display illumination to

brighter/darker. The darker the set-

ting the longer the standby time.

Unlocking:

Press and hold.

Note

Press the joystick repeat-

edly at the top/bottom to

adjust up or down.

The animated Bitmap screensaver and the

Digital clock considerably reduce the

phone’s standby time.

Start up anim.

Select animation to be shown when

phone is switched on.

Shutdn anim.

Select animation to be shown when

phone is switched off.

Setup

Volume

Set different volumes for types of

call/functions.

Ringtones

C _¢¢_ST_elec¢_{t f}R_ui_nn_cg_tt_io_on_ne_.s

Select

Set the signal tones on the phone to

suit your requirements.

Incoming call

Messages

Alarm clock

Organiser

System

Ringer setting

On/off

Activate/deactivate all

tones.

Beep

Reduce ringtone to a

short signal (beep).

Applications

§OK§

The ringtone sounds

again.

Silent alert

To avoid the disturbance caused by a

ringing phone, you can activate the

silent alert function as an alterna-

tive. The silent alert can also be acti-

vated in addition to the ringtone

(e.g. in noisy environments). This

function is deactivated when the

battery is being charged and acces-

sories are connected (except the

headset).

Set volume.

Confirm setting.

Additional information

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Select from several silent

alert versions.

Setup

Assign ringtone

A ringtone which has already been

selected will be played or the list of

possible ringtones will be displayed

for selection.

d Calls

Assign a single ringtone to all phone

numbers in the Addressbook.

Group calls

Assign a different ringtone to each

group.

Other calls

Assign one ringtone to the remain-

ing calls.

More melodies

Assign further ringtones for:

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

or record new with:

Sound recorder (p. 109)

You will find a list of all supported

formats for ringtones in My stuff

(p. 116).

Setup

Condition set.

Call setup

C _¢¢_ST_elec¢_{t f}C_ua_nl_cl_ts_ie_ot_nu_.p

Not set.

Display if status is

unknown (e.g. with a new

SIM card).

Hide ID

Clear all

When you make a call, your phone

number can be displayed on the

recipient's display (depending on the

service providers).

All set diversions are cleared.

Set up call divert (example)

To suppress this display, you can

enable the “Hide ID” mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

The most common condition for call

divert is, for example:

Unanswered

Select Unanswered.

(Includes the conditions

Not reachable, No reply,

Busy, see below)

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Set

Confirm.

Select.

Confirm.

Divert

Select or enter the phone

number to which the calls

are to be diverted.

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.

§Mailbox§ Use existing mail-

box phone numbers, or

enter them if necessary.

Status check

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and dis-

played.

Confirm. After a short

pause, the setting is con-

firmed by the network.

Setup

All calls

All calls are diverted.

Call screening

Only calls from phone numbers that

are in the Phonebook/Addressbook

or assigned to a group are signalled.

Other calls are only displayed.

Symbol in the top line of

the display in standby

mode.

Not reachable

Divert occurs if phone is switched off

or is out of range.

Any key answ.

Incoming calls can be accepted by

pressing any key (except for B ).

No reply

Minute beep

A call is only diverted after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5-second intervals.

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The person you are

talking to does not hear this beep.

Busy

Divert occurs if a call is in progress. If

Call waiting is activated (p. 25), you

will hear the call waiting tone during

a call (p. 27).

Receiving fax

Fax calls are diverted to a number

with a fax connection.

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Additional information

Note that the divert is stored in the network

and not in the phone (e.g. when the SIM

card is changed).

Reactivate divert

The last divert has been stored. Proceed as

with “Set divert”. The stored phone number

is displayed. Confirm number.

Setup

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Phone setup

C _¢¢_ST_elec¢_{t f}P_uh_no_cn_tie_os_ne_.tup

Key tones

Device check

Set the type of acoustic key

acknowledgement.

After the last information page, a

self-test as well as individual tests

are offered. If you select Selftest, all

individual test are carried out.

Info tones

Set service and alarm tones:

Software version

On/off

Activate/deactivate tones.

Display the software version for your phone

in standby mode:

Extended If switched on, a wider

range of service tones is

available, e.g. end of

# 0 6 #, then press §Info§.

menu reached, network

connection interrupted.

Memory assis.

The memory assistant will help you if

there is insufficient phone memory.

If required it can also be started

automatically from applications.

Automatic switch off

The phone switches off each day at

the set time.

After their capacities have been

checked, all files and folders are dis-

played along with their size and may

be viewed/opened and, if necessary,

deleted.

Activate

§Time§

Press.

Enter time

(24-hour clock).

Confirm.

Deactivate

§Manual§ Press.

Confirm.

Setup

File system

Master reset

Format

(Phone-code protected)

The phone is reset to default values

(factory setting). This does not affect

the SIM card or the network settings.

The telephone memory is formatted

and all saved data such as ringtones,

pictures, games, etc. is deleted.

Alternatively, in standby mode

enter:

# 9 9 9 9 #

Formatting may take longer than

one minute.

Clean up

Create more memory by deleting

temporary files no longer required.

Setup

Open menu.

§Options§

Set

Clock

C _¢¢_ST_elec¢_{t f}C_ul_no_cc_tk_ion.

Set time zone.

Auto time

Have the time zone auto-

matically set by the net-

work.

zone

Time/date

The clock must be set correctly once,

at start-up.

Search city

Help

Search for a city.

Operating instructions.

§Change§ Press.

First enter the date (day/

month/year), then the

Date format

Select the display format for the

date.

time (hours/minutes/sec-

onds).

Additional information

If the battery is removed for longer than

30 seconds, the clock must be reset.

Time format

Select 24h or 12h.

Buddhist year

Switch to the Buddhist year (not on

all phone models).

Time zones

The time zone can be selected in the

world map or a city list:

Show clock

World map

Select the desired time

zone.

Activate/deactivate time display in

standby mode.

City list

Auto time zone

The timezone is identified automati-

cally.

Select a city in the

selected time zone.

Setup

IrDA

Connectivity

C _¢¢_ST_elec¢_{t f}C_uo_nn_cn_tie_oc_nti_.vity

Activate/deactivate IrDA.

Your phone has an infrared inter-

face. With this interface, you can

exchange data such as pictures, ring-

tones, Addressbook entries, busi-

ness cards or organiser data with

other devices which also have an

infrared interface.

GPRS

(General Packet Radio Service)

Switch GPRS on/off.

GPRS is a method for transmitting

data faster in the mobile network.

Use GPRS and if the network has suf-

ficient capacity, you can be con-

nected to the Internet permanently.

The network provider charges only

for the volume of data transmitted.

Some service providers do not yet

support this service.

The infrared interface is on the left

side of the phone. The distance

between the two devices must not

exceed 30 cm. The infrared windows

in both appliances must be aligned

as accurately as possible with each

other.

Shown in the display:

IrDA activated.

Activated and available.

During transmission.

Registered.

If IrDA is activated, standby time for

the phone will be reduced.

Temporarily interrupted.

GPRS info

Display the transmitted volume.

Setup

Activate/deactivate Blue-

tooth™.

Bluetooth™ (BT)

Bluetooth™ is a short-range radio

connection by means of which a

headset or car kit, for example, can

be connected without the need for

wires. Using the Send/print function

in the options menu for the applica-

tion concerned you can also use this

route to send data.

My BT name: You can give

the phone a name when

you activate Bluetooth™

for the first time.

If Bluetooth™ is activated, IrDA

(infrared) is not active and vice

versa.

With SAP (SIM Access Profile) a car

phone GSM module can, for exam-

ple, use the access data from the SIM

card on your phone. There is no need

to swap the SIM card. It is possible

that SAP might not be supported by

your service provider.

If Bluetooth™ is activated, standby

time for the phone will be reduced.

Bluet'th setup

Call up the setting func-

tions (Bluetooth™ must

be activated).

Each Bluetooth™ device has its own

specific address and can be given a

self-explanatory name as an option.

Password protection ensures the

security of a Bluetooth™ connection,

as does including the BT partner in a

list as a “confidential” device.

• Search/Search all

Specify which BT devices are to be

searched for:

All

All BT devices

Audio

Phone

E.g. headset, car kit

Other BT phones

To establish a Bluetooth™ connec-

tion between your phone and other

Bluetooth™ devices you must acti-

vate Bluetooth™.

Personal computer with

BT connection

Start search

The number and name of the most

recently found BT device are dis-

played.

Setup

The search is ended and

the first 10 devices found

are shown in a list.

• Known devices

To make selection easier, frequent

BT partners can be recorded in the

known device list. If entries are

“confidential”, no password query is

made.

§Retry§ Start new search.

Scroll to entry required.

• Last connect.

Dial the device or start the

procedure for acceptance

as a “confidential” device

(see below).

List of most recently and/or still con-

nected devices.

• Black list

§Options§ Open menu.

Attempts to make connections to

devices in this list are rejected.

Details

Display the name and

address of the BT device.

List options

Trusted

dev.

Each list offers different functions.

§Options§ Open menu.

Add the device as confiden-

tial to the list of known

devices. To do this, enter

the password for the other

device. The device must

first be set to a “confidential

mode”. If the list is full it is

not possible to add another

device.

Mark as

audio

If not possible automati-

cally, specify device as an

“audio” device.

Increase

prio.

Move entry up the list so

that, for example, a specific

audio device is used first.

To known

list

Add to the list of known

devices (see below).

Decrease

prio.

Move entry down the list.

To black list

Add to the black list (see

below).

To known

list

Move entry to the list of

known devices.

Retry

Start new search.

To black list

Move entry to the black list.

(For standard functions see p. 16)

Setup

• My BT name

Shown in the display

The phone is given a name (max.

16 characters) – this is the name the

partner sees. If no name is given, the

phone uses the non-changeable

device address.

Bluetooth™ activated.

Bluetooth™ visible to others.

Bluetooth™ during data trans-

fer.

Call to Bluetooth™ device

accepted.

• Visib.to others

Set how your phone should respond

to other BT devices. This means (if

“visible”) for example that the device

address or the BT name of your

phone is shown to other BT devices if

they request this in order to receive

or send data.

Not visible

Your phone is not “visible” to other

BT devices. Known devices such as

Bluetooth™-Headset/Car Kit con-

tinue operating.

Auto mode

Your phone is not “visible” to other

BT devices for several minutes. You

will then be asked if “visibility”

should continue.

Always visible

Your phone is always “visible” to

other BT devices. These devices can

create a connection to your phone

and be added to the known device

list if necessary.

Setup

Data services

HTTP profile

Basic setting and activation of the

connection profiles for data trans-

mission such as MMS, WAP.

The phone default setting varies

from service provider to service pro-

vider:

The phone default setting varies from

service provider to service provider:

• The settings have already been

implemented by the provider. You

can start immediately.

• The settings have already been

implemented by the provider. You

can start immediately.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• The access profiles must be con-

figured manually.

• The access profiles must be con-

figured manually.

If necessary, check with your service

provider for details. You will also find

the current settings for the service

provider on the Internet at

www.siemens-mobile.com/customercare

in the FAQ section.

If necessary, check with your service

provider for details. You will also find

the current settings for the service

provider on the Internet at

www.siemens-mobile.com/customercare

in the FAQ section.

Make the settings.

Authentication

Select profile

Activate or deactivate encrypted

dial-up (CSD connections only) for

Internet access.

Select the profile.

Confirm selection.

Set profile

Select the profile.

§Options§

Open menu.

§Edit§

Open the selection.

Select CSD settings, and/or

GPRS settings.

§Edit§

Make the settings as spec-

ified by your service pro-

vider.

Setup

Fax/data

Rec. voice/fax

(Only if no special fax or data number

is available)

Fax/data mode using a PC

With the phone and a connected PC,

you can transmit and receive faxes

and data. Appropriate software for

fax and data communication must

be available on your PC and there

must be a connection to the phone.

Start the required communication

program on your PC and activate the

function on the phone during the call

(the PC will take over the connec-

tion).

Fax and data services must be ena-

bled by the service provider. There

are variations in fax and data recep-

tion, depending on the network.

Please ask your service provider

about this.

End transmission

End transmission with PC software

and/or press

Rec fax/data

Your service provider has given you a

number for telephoning and a

fax/data number.

Send voice/fax

Set this function on the phone before

transmission so that you can switch

from voice mode to fax mode.

The call is signalled by a special ring-

tone and the type of call (fax or data)

is displayed. Now start the commu-

nication program on your PC to

receive the fax/data.

Setup

Only ‚

(PIN2 or phone-code protected)

Dialling options are restricted to SIM-

protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.

Security

C _¢¢_ST_elec¢_{t f}S_ue_nc_cu_tr_ioity_n.

Auto key lock

The keypad is locked automatically if

no key has been pressed for one

minute in standby mode. This pre-

vents the phone from being used

accidentally. However, you can still

be called and you can still make an

emergency call.

If the SIM card does not support PIN2

input, the whole Phonebook can be

protected with the phone code.

Codes

For description, see p. 18:

Additional information

The keypad can also be directly locked and

unlocked in standby mode.

PIN control, Change PIN, Change PIN2,

Chg.phonecode

In each case:

Press and hold.

This SIM only

(Phone-code protected)

Direct call

(Phone-code protected)

Only one phone number can be

dialled (see also p. 28).

The phone can be connected to a

SIM card once the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Setup

When roaming

You do not receive calls when you

are outside your home network. This

means that no charges are incurred

for incoming calls.

Barrings

Barring restricts the use of your SIM

card (not supported by all service

providers). You need a 4-digit net-

work password for network barring.

Your service provider will give you

this password. You may need to be

registered separately for each

barring.

Status check

The following information can be

displayed after a status check:

Barring set.

All outgoing

All outgoing calls except emergency

numbers are barred.

Barring not set.

Status unknown

(e. g. new SIM card).

Outgoing intl.

(International outgoing)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x.home

(International outgoing without home

country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

All incoming

The phone is barred for all incoming

calls (forwarding all calls to mailbox

provides a similar effect).

Setup

Network info

The list of GSM networks currently

available is displayed.

Network

C _¢¢_ST_elec¢_{t f}N_ue_nt_cw_to_iork_n.

Indicates non-authorised

service providers

(depending on SIM card).

Line

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Choose netwrk

Network search is restarted. This is

useful if you are not on your home

network or want to register on a dif-

ferent network. The network list is

rebuilt when Auto network is set.

Select line

Select the currently used phone

number.

Display current phone

number.

Auto network

Activate/deactivate, see also Choose

netwrk above. If “Automatic network”

is activated, the next network on the

list is dialled in ranking order of your

“preferred networks”. Otherwise a

different network can be selected

manually from the list of the availa-

ble GSM networks.

Protected

(Phone-code protected)

You may limit usage to one phone

number.

Additional information

Special settings may be made for each

phone number (e.g., melody, call divert

etc.) To do this, first switch to the required

phone number.

Pref. network

Switch from phone number/connection in

standby mode:

Enter your preferred service provid-

ers here for when you leave your

home network (e.g. if there are dif-

ferences in price).

Press.

§Line 1§

Press.

Setup

Your service provider is displayed:

User group

§List§

Display list of preferred

networks.

Depending on the service provider,

you can create groups with this serv-

ice. These can have access to inter-

nal (company) information, for

example, or special rates apply.

Please check with your service pro-

vider for details.

Create/change entry:

<Empty> or select an existing entry,

then select a new service

provider in the list and

confirm.

Active

Record new service provider

(last entry in the list):

Activate/deactivate function. “User

group” must be deactivated for nor-

mal phone use.

Furth.network

Select, enter the provider data and

save it.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are

obtained from your service provider.

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

All outgoing

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a differ-

ent network. This can change when the tel-

ephone is next switched on or if another

network is selected manually.

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls within the

group are permitted.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900.

Pref. group

If activated, calls may only be made

within this standard user group

(depending on the network configu-

ration).

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

Setup

Automatic settings

Accessories

C _¢¢_ST_elec¢_{t f}A_uc_nc_ce_ts_ios_nor_.ies

• Permanent illumination:

switched on.

• Key lock: switched off.

Car Kit

• Charging the phone battery.

Only in combination with an original

Siemens handsfree car kit (see

p. 126). The car kit profile is acti-

vated automatically when the phone

is inserted into the cradle.

• Auto. activation of the car kit pro-

file when phone is inserted in the

cradle.

Headset

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds. Eavesdropping

is possible!

Only in conjunction with an original

Siemens headset (see accessories). If

an original Siemens headset is used

the profile is automatically activated

when the headset is plugged in.

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds (except where

the ringer is switched off or set to

beep). You should therefore be

wearing the headset.

Shown on the display.

Automatic switch off

(factory default: 2 hours)

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the time at which the phone

switches off automatically.

Automatic setting

Accept call with Call key or PTT key

(Push To Talk), even when the auto

key lock is activated.

Car loudspk.

Improves playback in certain circum-

stances.

Auto answer

If you do not notice that your phone has

accepted a call, there is the danger that the

caller may eavesdrop.

My menu

Press.

Change menu

§My menu§ Press.

You can replace each entry (1–10)

with another entry from the selec-

tion list.

Create your own menu with fre-

quently used functions, phone num-

bers or Internet pages.

Select the required entry.

The list of 10 entries is preset. You

can, however, change it as you wish.

§Change§ The function list is opened

for selection.

Select the new entry from

the list.

Use

Confirm. The entry is

saved.

Select the required entry.

Confirm.

If Phonebook is selected,

the phone number must

also be selected; if Internet

is selected, the bookmark

must also be selected.

If the entry selected is a

phone number, you can

also dial it with the Call

key.

Reset all

(Phone code required)

§Reset all§ Select. After a security

prompt, the pre-assign-

ment is reset.

100

Fast access

You can assign one important phone

number or function to each of the

two soft keys and number keys 2 to 9

(speed-dial numbers). The phone

number can then be dialled or the

function can be started at the touch

of a button.

Soft keys

Change

For example, the Internet function is

assigned to the soft key. To change

this (in standby mode):

§Internet§ Press briefly.

§Change§ Scroll to new assignment

in the list.

Service provider

Confirm.

• Special case Phone number. Choose

a name from the Phonebook/

Addressbook for assignment to

the key.

01.03.2004

10:10

Help

Internet ì

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

Additional information

The service provider may have already

assigned functions to a soft key (e.g.

access to “SIM services” or direct call-up of

the Internet portal). It may not be possible

to modify this key assignment.

The left soft key may sometimes be

replaced automatically by p /À to

access a new message for example.

Apply

In standby mode:

Application

The “Internet” is just used as an

example here.

§Internet§ Press and hold; the appli-

cation is started.

Phone number

The assignment “Carola” is used here

only as an example.

§Carola§

Press and hold. The phone

number is dialled.

Fast access

101

Apply

Speed dialling keys

Select a stored phone number or

start a stored application (e.g. Inter-

net).

Number keys 2 to 9 can be used as

speed dialling numbers for fast

access. Number key 1 is reserved for

the mailbox phone number (p. 62)

and number key 0 is reserved for

switching between two connections

during use (p. 96).

In standby mode:

Press briefly.

The assignment of the number key 3

is displayed above the right soft key

e.g.:

Change

In standby mode:

§Internet§ Press and hold.

Or simply

Press number key briefly

(e.g. the 3).

Press and hold.

If this number is still free:

§Set§

Press.

Select a new function

from the list and confirm

with §OK§.

If an assignment has

already been made to this

key (assignment dis-

played above the right

soft key):

§Change§

Press briefly.

Scroll to application in the

list.

Confirm.

• Special case Phone number. Choose

a name from the Phonebook/

Addressbook for assignment to

the key.

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

102

Organiser

Daily view

Calendar

Special displays:

Description of appointment.

Navigation:

C ¢Q¢Calendar

You can enter appointments in the

calendar. Time and date must be set

for the calendar to work correctly.

One day forward/back.

The calendar offers you three views:

To the start/end of the day

or next/last entry.

Monthly view

Special colour coding:

Calendar setup

Day with entries for appointments,

day-long appointments, weekends.

C ¢Q¢Calendar setup

Start of day:

Navigation:

Time when the working day begins.

One day forward/back.

Start of week:

Weekday on which the monthly and

weekly view on the left starts.

One week forward/back.

Daily view open.

Set weekend

Set the days for the weekend.

Weekly view

Special displays:

Show birthdays:

Shown in the display

Appointments are shown as a verti-

cal colour bar on the horizontal hour

division.

Synchronising with a PC

Navigation:

With the mobile phone manager, (p. 117)

you can synchronise appointments, tasks

and memos with Outlook^®or Lotus

Notes™.

One day forward/back.

Forward/backward by the

hour through the day.

Organiser

103

Different input/selection fields are

displayed depending on the type.

The number of fields can be

Appointments

C ¢Q¢Appointments

restricted, see Standard, p. 104.

Appointments are displayed in

chronological order in a list.

Description:

Description of nature of

appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from the Addressbook.

Select.

Types:

Memo

Voice memo:

Enter a voice recording, see Dic-

Text input for description.

tat.machine, p. 106.

Voice memo

Enter voice memo.

Location:

Shown with alarm.

Location of appointment.

Call

Whole day:

All-day appointment: Yes/No

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment starts.

Meeting

Start time:

Time when appointment starts.

Text input for description.

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

104

Organiser

Alarm time:

Information on the alarm

On/off or Silent alert.

When the set date and time are

reached there is an audio and a vis-

ual alarm. If an alarm is missed it

appears in the list of missed appoint-

ments (p. 105).

Enter the period of time

before the appointment

and select the time unit:

Minutes, Hours, Days

Alarm type Memo:

Reoccurrence:

Select a timeframe for repeating the

appointment:

Meeting: The text is shown in the dis-

play.

Alarm type Call: The phone number

is displayed and can be dialled

immediately.

No, Daily, Weekly, Monthly, Yearly

Enter a parameter for repeating:

Forever, Until, Occurrences (number)

Alarm type Birthday: You can send

special birthday greetings by SMS,

MMS, e-mail or a call via §Options§.

If Weekly is selected, certain week-

days can be highlighted.

Use Snooze to set the alarm to

repeat.

Standard

In the list, select those fields which

are to be offered for future entries.

Tasks

Additional information

C ¢Q¢Tasks

Display above set alarms:

A task is displayed like an appoint-

ment in the agenda of the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task

appears at the top of the list every

day until it is marked as completed.

Alarm clock

Appointment

An alarm sounds even when the phone is

switched off (except in aircraft mode,

p. 77). The phone does not go to standby

mode. Press any button to switch the alarm

off.

The entries are made in the same

way as Appointments (see “Appoint-

ments”). Then:

Organiser

105

Status:

Missed appts.

Select Done or Outstanding.

C ¢Q¢Missed appts.

Priority:

Events with an alarm (Appointments,

Tasks) to which you have not reacted

are listed for reading.

Select 5 levels from Lowest to Highest.

Use date

If activated with Yes, the following

time input option is offered.

Organiser options

Due date:/Expiry time:

Enter the date and time by which the

task is to be completed.

Depending on the application used

(Calendar, Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

Alarm: and Standard as for Appoint-

ments.

§Options§ Open menu.

Delete

Delete entry.

Notes

Delete until

Delete all entries prior to a

certain date.

C ¢Q¢Notes

Write and manage brief text notes.

Delete all

Delete all entries after

confirmation.

Enter a new note

Delete

done

Delete all completed tasks.

Select.

Activate/

Deactivate

Switch alarm on/off.

Enter text. The first line is

displayed as a “title” in the

notes list. Total length:

max. 160 characters.

Filter

Display all entries with the

selected feature.

Confiden-

tial

Protect note with phone

code. We recommend that

you do not store any pass-

words (PIN, TAN etc.) as

notes.

§Options§ Open menu.

Save

Save note. When Confiden-

tial is selected, a note is

protected with the phone

code.

(For standard functions see p. 16)

106

Organiser

Playback

Dictat.machine

Select the desired record-

ing.

C ¢Q¢Dictat.machine

Use the dictating machine to record

short voice memos.

Switch between playback/

pause.

D E

• Use your phone as a dictating

machine when on the move.

Press and hold for rapid

rewind and fast forward.

• Record a memo as a reminder or

as a note for others.

Dictating machine options

§Options§ Open menu.

• Add a voice memo to an appoint-

ment in the calendar.

Loudspeaker

Playback through the

built-in loudspeaker.

New recording

(For standard functions see p. 16)

Select.

The remaining time avail-

able, as well as the record-

ing time, are shown in the

display.

Using the plus/minus key

(in standby mode)

Press and hold for the

duration of the recording.

A brief beep sounds when

the recording starts. Now

Press briefly to play back

the most recent

recording.

dictate the text.

Switch between pause/

record.

End recording.

The recording is automat-

ically saved with a time

stamp.

Rename with §Options§.

Organiser

107

Time zones

C ¢Q¢Time zones

The time zone can be selected in the

world map or a city list:

World map

Select the desired time

zone.

City list

Select a city in the

selected time zone.

Time zone options

§Options§

Open menu.

Set

Specify the time zone.

Auto time

zone =

The time zone is switched

automatically to local time

by the network.

Search city

Help

Search for a city.

Operating instructions.

108

Extras

Set alarm call time

(hh:mm).

SIM services (optional)

C ¢ ¢SIM services

Switch to week days.

Your service provider may offer spe-

cial applications such as mobile

banking, share prices, etc. via the

SIM card.

Navigate to the various

days.

Display options: alarm call

time and days.

If you have such a SIM card, the SIM

services will appear in the main

menu under “Extras” or directly

above the soft key (on the left).

Alarm clock

§On§

Symbol for SIM services.

07:30

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone can support future addi-

tions to your service provider's user

package. For further information,

please contact your service provider.

Mo Tu We Th Fr Sa Su

Edit ì

Set days for alarm calls.

Press again to delete the

highlighting.

Alarm clock

Press and hold to high-

light/unhighlight all the

days.

C ¢ ¢Alarm clock

The alarm will ring at the time set by

you, even when the phone is

switched off.

§OK§

Confirm setting.

Activate/deactivate the

alarm.

Additional information

Screen display in standby

mode: alarm clock activated.

Use Snooze to set the alarm to repeat.

Switch to time setting.

Extras

109

Playback

Sound recorder

Select the desired record-

ing.

Use the sound recorder to record

noises and sounds for use as ring-

tones. The sound recorder is usually

started from other applications/func-

tions such as assigning a ringtone.

D E

Switch between playback/

pause.

Press and hold for rapid

rewind and fast forward.

New recording

§Options§ Open menu.

Start from main menu

Loudspeaker

Playback through the

built-in loudspeaker.

C ¢ ¢Sound recorder

Set as...

Set the recording as a

ringtone.

Select.

The remaining time avail-

(For standard functions see p. 16)

able, as well as the record-

ing time, are shown in the

display.

Start it from another application

as follows

The recording display appears:

A brief beep sounds when

the recording starts.

Switch between pause/

record.

End recording.

The recording is saved

with a timestamp in the

Sounds folder.

Rename with §Options§.

§Insert§

Transfer the recording

into the application.

110

Extras

Calculator options

§Options§ Open menu.

Calc.

C ¢ ¢Calc.

The calculator can be used in a basic

version and with an advanced range

of functions. The input line and two

calculation lines (including the

matrix with the calculation func-

tions) are located in the top half of

the display.

Convert

Call up the unit con-

verter with the current

result.

Clear all

Delete all units.

Extended mode/

Basic mode

Convert calculation

functions.

(For standard functions see p. 16)

Enter digit(s).

Navigate functions.

Unit converter

Use function. The result is

calculated and displayed

immediately.

C ¢ ¢Unit converter

You can convert various measure-

ment units into other measurement

units.

Basic functions

+, -, *, /

Basic calculation types

The following types are offered with

various units:

Result

Reversion

Convert to percentage

Decimal point.

Sign change “+”/“–”

1/x

Velocity

Energy

Mass

Pressure

Time

§Options§ Expansion of the range of

functions:

Square root

Square

Volume

Area

M+

Exponent

Length

Power

Save displayed number

Call up saved number

Insert number from memory

Temperature

Currency

Extras

111

Example for Velocity units:

Now enter the name and exchange

rate of the currency to be converted.

Type

Units

§Options§ Open menu.

Velocity

Kilometres/h,Metres/sec,

Miles/h, Miles/sec, Knots,

Mach

Add currency

Set as base

Edit rate

Enter new currency and

exchange rate.

Use entered currency as

base currency.

Converting the units/currency

Select the source unit/

currency.

Change the exchange

rate of the base currency.

Calc.

Start calculator.

Switch to the input field.

(For standard functions see p. 16)

Enter the quantity to be

converted.

Stopwatch

Switch to the selection

field.

C ¢ ¢Stopwatch

Select the target meas-

urement unit/currency.

The result is displayed.

Two intermediate times can be

recorded and saved.

Start/stop.

You can use both input fields alter-

nately.

Save intermediate time.

Special key functions:

After a stop:

Set decimal point.

Reset to zero.

Change sign.

Stopwatch options

Currency

§Options§ Open menu.

When you call up the function, you

must enter a base currency into

which the conversions are to be

made.

Stopwatch

list

Display saved entries.

(For standard functions see p. 16)

Enter currency

(e. g. euro).

§Save§

Store entry.

112

Extras

Countdown

Remote synchronisation

C ¢ ¢Countdown

C ¢ ¢Remote syncr.

A set time elapses. The last

3 seconds are indicated by a beep. At

the end a special beep sounds.

You can use this function remotely

to access externally filed data

(addresses, calendar, etc.) and syn-

chronise these with the data on your

phone. The data can, for example,

be saved on a company computer or

the Internet e.g.:

If no time has been entered:

Open input window.

Set period of time.

www.siemens-mobile.com/s65syncml

Confirm.

Synchronise

§Sync§

If a countdown time is specified:

The computer is selected

and synchronisation

started. When completed,

the actions which have

been performed are dis-

played.

Start countdown.

While the time is elapsing:

Interrupt counter.

Let counter continue

running.

§Next§

Scroll through the various

displays.

§Reset§

Reset counter to starting

time.

Sync. setting

The following settings can be made

prior to synchronisation:

Sync. profile

You can choose between 5 profiles.

Select profile.

Activate profile.

§Edit§

Set profile.

Extras

113

Server sett.

Providers

Last sync:

Time of the last synchronisation.

Display the current service

provider.

Sync. mode

• Sync data: Modified data or All data

Homepage:

Port:

e.g. www.siemens-

mobile.com/s65syncml

• Sync direction: Two-way, Mobile

update or Server update

Enter port number.

e.g. 80.

Sync items:

Highlight database areas to be

synchronised:

Enter user name (login

name).

Calendar

Addressbook

Notes

Password:

Enter password (shown as

a series of asterisks).

Calendar

path

Contacts

path

Notes path

Task path

e.g. events

Tasks

Save settings.

e.g. contacts

e.g. tasks

e.g. notes

HTTP

authenti-

fica.:

Confirmation required; Yes/

No (if No, the input fields

are not visible).

HTTP name:

Enter name.

HTTP

password:

Enter password.

114

Media player

When you are viewing a picture/

video or listening to a melody, the

application starts a media playback.

Melodies/video

The media playback offers the fol-

lowing functions for melody and

video playback:

Press briefly to scroll to the

next media file.

Play or stop, depending

Switch on display illumi-

nation.

–

on the situation.

/kl Set volume.

Pictures

Switch to mute.

The following functions can be

applied to a displayed picture:

§Stop§

Pause function.

End playback.

Zoom function if the dis-

Options

played picture has a

higherresolutionthan the

display.

§Options§ Open menu.

Use the plus/minus key to

enlarge/reduce the size of

the picture.

Different functions are offered

depending on the starting situation

and the object.

The joystick moves the

picture detail.

Volume

Set the volume with the

joystick.

5 Centre the picture.

Set as...

Set picture as Wallpaper,

Logo, for example, and

sounds, for example, for

Incoming call, Startup

melody.

Switch to full screen

mode and back again.

§Send§

Send via MMS or e-mail,

for example.

Slideshow

Edit

Automatic run-through in

full screen mode. Change

individual picture with joy-

stick.

Access to picture editing.

(For standard functions see p. 16)

My stuff

115

My stuff

To organise your files, you can use

the file system like a PC file manager.

There are separate folders for the

various data types in My stuff.

My stuff options

§Options§ Open menu.

Move

Place highlighted file(s) or

folder in temporary mem-

ory.

C ¢N

The list of the folders and files is dis-

played. The first entry in My stuff is

always the RS MultiMediaCard

(p. 116).

Copy

Place highlighted file(s) or

folder in temporary mem-

ory.

Paste

Navigation

Transfer content of tempo-

rary memory into current

folder.

Select file/folder in lists.

The cursor can be moved

New folder

Create a new folder and

name it.

as required in the pre-

view.

Thumbn.

view/

List view

Switch over to miniature

view/view of list.

Open folder or start file

with related application.

Attributes

Format card

Eject card

Display information on file

or folder selected.

The application for the folder cur-

rently selected is loaded.

Format inserted

RS MultiMediaCard.

Allows the RS MultiMedia-

Card to be removed with-

out loss of data.

The browser is started and the down-

load page displayed.

(For standard functions see p. 16)

116

My stuff

Directory structure

RS MultiMediaCard

Separate folders have already been

created for different data types in

My stuff. These folders cannot be

changed.

The RS MultiMediaCard gives your

phone a very large memory capacity.

This allows you to save picture/video

files, and sound recordings, for

example. However, you can also use

this memory card like a floppy disk to

save any other files you may wish to

save.

Folder

Description

Format

Pictures

bmp

bmx

jpg/jpeg

png

Pictures

C ¢N¢C

gif

The list of the folders and files is

displayed. The first entry is always

My stuff.

Videos

3gp

Videos

Anima-

tions

bmx

gif

Startup/shutdown

animations

The folders and files on the memory

card are managed in the same way

as in My stuff. If the memory card

assigns a file to a function in the

phone such as a ringtone, this is cop-

ied to My stuff.

Sounds

mid

amr

wav

Melodies

Themes

sdt

Loaded theme

(zipped)

Additional information

RS MultiMediaCard is a trademark of the

MultiMediaCard Association.

stc

Theme configura-

tion (unzipped)

Skins

scs

Loaded user inter-

faces

Changing the RS MultiMediaCard (p. 10)

New RS MultiMediaCard™

1. Create a backup copy on a PC of the

data on the old memory card using the data

exchange software.

Games

jar

jad

Java archive

Download info

Applica-

tions

Applications

2. Format the new memory card.

Misc

tmo

vmo

3. Copy the data from the PC onto the new

memory card with the data exchange soft-

ware.

Text modules

Voice recordings

Depending on the service provider, the

structure, content and range of functions in

My stuff may vary.

Mobile Phone Manager

117

Mobile Phone Manager

The Windows® PC program, Mobile

Phone Manager, enables you to use

extended phone functions from your

PC. For example, you can update

your Addressbook in the phone,

read, save and send SMS and MMS

messages, or synchronise your

phone with Outlook® or Lotus

Notes™. The phone and PC commu-

nicate via a data cable (See Accesso-

ries, p. 126).

SMS and MMS management

(messages)

Write MMS and SMS messages from

the convenience of your PC. Use all

the options your PC offers you and

use your sounds and pictures to cre-

ate MMS and EMS messages. You

can read, forward, print, delete and

archive your messages.

Backup and restore

You can download the software

from the Internet:

www.siemens-mobile.com/s65

Contacts management

With the back-up function, you can

regularly make a back-up copy of

your telephone data on the PC. If you

ever lose the data on your phone or

replace the phone, you can quickly

re-instate all data with the restore

function. Please observe any possi-

ble restrictions for DRM-protected

data (p. 14).

You can use contacts management

to manage the personal contacts you

have stored in your phone, to add

new ones and to delete and edit

them. You can compare and copy

contacts between your phone,

Outlook®, Lotus Notes™ and other

Siemens phones (including Gigaset).

118

Mobile Phone Manager

Bookmark management

(browser & bookmarks)

Processing pictures and photos

(images)

Use your PC to browse through the

Internet and define your preferred

sites. Save the Internet addresses as

bookmarks on your phone so that

you can quickly call them up at a

later time when you are on the

move.

Picture/photo processing offers the

user the opportunity to conveniently

create, edit and manage pictures

and photos. Filters and effects are

offered to help create colourful,

attractive graphics. The user-friendly

interface makes child’s play of trans-

ferring pictures/photos from or to

the mobile phone, and of changing

the graphic settings.

Phone explorer

Ringtone management (sound)

You can use the phone explorer to

read your phone’s file system. Files

such as pictures, sounds and much

more can easily be copied between

the phone and PC by dragging and

dropping.

The sound module allows the user to

manage nearly all sound formats

easily and to save them on the

phone. This phone does not support

MP3 functionality.

GPRS modem

The GPRS modem establishes an

Internet connection via your mobile

phone so that you can surf the Inter-

net on your laptop while on the

move and at the touch of a button.

Questions & Answers

119

Questions & Answers

If you have any questions on the use of your phone, you can contact us at

www.siemens-mobile.com/customercare around the clock. As further help we have listed

below some frequently asked questions and answers.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least 2 seconds.

Flat battery.

Charge battery. Check charging indicator in the

display.

Battery contacts dirty.

Clean contacts.

See also below under “Charging

error”.

Standby time is too

short.

Frequent use of organiser and Restrict use if applicable.

games.

Fast search activated.

Deactivate speed search (p. 97).

Display illumination switched on. Switch off display illumination (p. 80).

Unintentional keystrokes (illumi- Activate key lock (p. 94).

nation!).

Charging error

(charge icon not dis-

played).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +40 °C.

Make sure the ambient temperature is right, wait

for a while, then recharge.

Contact problem

Check power supply and connection to the

phone. Check battery contacts and telephone

connection socket, clean them if necessary, then

insert battery again.

No mains voltage.

Use different mains power socket, check mains

voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

SIM error.

SIM card not inserted correctly. Check that the SIM card is inserted correctly

(p. 9).

Dirty SIM card contacts.

Clean SIM card with a dry cloth.

Use 1.8 or 3 V SIM cards only.

SIM card with wrong voltage.

SIM card damaged (e.g.

broken).

Carry out a visual check. Have service provider

change the SIM card.

120

Problem

Questions & Answers

Possible causes

Possible solution

No network connec- Weak signal.

tion.

Move higher, to a window or an open space.

Check service provider's coverage area.

Complain to the service provider.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Try manual selection or select a different net-

work (p. 96).

Network call barring is set.

Network overloaded.

Check network barrings (p. 95).

Try again later.

Phone loses network. Signal too weak.

Reconnection to another service provider is

automatic (p. 96). Switching phone off and on

again can speed this up.

Calls not possible.

Second line set.

Set first line

(p. 97).

New SIM card inserted.

Charge limit reached.

Credit used up.

Check for new barrings.

Reset limit with PIN2 (p. 40).

Load credit.

Some calls not possi- Call restrictions are in place.

ble.

Barrings can be set by service provider. Check

barrings (p. 95).

Impossible to make

entries in Phone-

book/Addressbook.

Phonebook/Addressbook is full. Delete entries in the Addressbook/Phonebook

(see standard functions, p. 16).

Voice message not

functioning.

Call divert to mailbox not set.

Set call divert to mailbox (p. 62).

flashes to indicate SMS memory full.

an SMS.

Delete SMS messages (see standard functions,

p. 16) or archive them (p. 47).

flashes to indicate MMS memory full.

an MMS.

Delete MMS messages (see standard functions,

p. 16).

å flashes to indicate Phone memory full.

an MMS.

Delete messages, pictures, videos, games or

applications.

Function cannot be

set.

Not supported by service pro- Contact your service provider.

vider or registration required.

Capacity problems

with, for example,

Games & More, ring-

tones, pictures, vid-

eos, SMS archive.

Phone memory full.

Delete files in the relevant areas. You can use

the memory assistant to delete specific files

(p. 85).

No Internet access;

downloading not

possible.

Profile not activated, profile set- Activate or set browser profile (p. 72). If neces-

tings wrong/incomplete. sary ask your service provider.

Questions & Answers

Possible solution

121

Problem

Possible causes

Text message cannot Service provider does not sup- Contact your service provider.

be sent.

port this service.

Phone number for service cen- Set service centre (p. 49).

tre not set or incorrectly set.

SIM card contract does not sup- Contact your service provider.

port this service.

Service centre overloaded.

Repeat message.

Recipient does not have a com- Check.

patible phone.

EMS pictures are not Destination phone does not sup-

displayed on the desti- port the EMS standard.

nation phone.

No Internet access

possible.

Incorrect browser profile set, or Check browser settings (p. 72), or contact your

wrong or incomplete settings. service provider.

PIN error/

PIN2 error.

Three wrong entries.

Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If you

have lost the PUK (MASTER PIN), contact your

service provider.

Phone code error.

Three wrong entries.

Contact Siemens Service (p. 122).

Service provider code No authorisation for this service. Contact your service provider.

error.

Too few/too many

menu entries.

Functions may have been

added or deleted by the service

provider via the SIM card.

Check with your service provider.

No fax possible.

Wrong settings in the PC.

Check settings (p. 93).

No authorisation for this service. Contact your service provider.

Charge meter does

not work.

Charge pulse is not being trans- Contact your service provider.

mitted.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry

connector contacts thoroughly. Stand mobile upright in an air current. Do not dis-

mantle the phone!

Reset all settings to factory default, p. 86: # 9 9 9 9 #

122

Customer Care

If repair work is necessary, please contact

one of our service centres:

We offer fast, individual advice! You have

several options:

Abu Dhabi .........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brazil............................................0 80 07 07 12 48

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

China ...........................................0 21 38 98 47 77

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Egypt.................................................0 23 33 41 11

Estonia.................................................. 6 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany......................................0 18 05 33 32 26

Greece............................................80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy .................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 52 74 20 10

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

Our online support on the Internet:

www.siemens-mobile.com/customercare

We can be reached any time, any place.

You are given 24 hour support on all

aspects of our products. Here you will find

an interactive fault-finding system, a com-

pilation of the most frequently asked ques-

tions and answers, plus user guides and

current software updates to download.

You will also find the most frequently

asked questions and answers in the chap-

ter entitled “Questions & Answers”

(p. 119).

You can also get personal advice about our

range of products on our Premium Hotline:

United Kingdom ............................ 0906 9597500

(£0.75 per minute)

Qualified Siemens employees are waiting to

offer you expert information about our prod-

ucts and installation.

In some countries repair and replace serv-

ices are impossible where the products are

not sold through our authorised dealers.

When calling customer service, please have

ready your receipt and the phone identity

number (IMEI, to display press # 0 6 #), the

software version (to display, press # 0 6 #,

then §Info§) and if available, your Siemens

Service customer number.

Customer Care

123

Malaysia....................................+ 6 03 77 12 43 04

Malta.......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 57 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 04 60 00

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 65 79 71 00

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Vietnam...........................................84 89 20 24 64

Zimbabwe ............................................04 36 94 24

124

Care and maintenance

Your phone has been designed and

crafted with great care and attention

and should also be treated with care.

The suggestions below will help you

to enjoy your phone for many years.

• Do not drop, knock or shake your

phone. Rough handling can dam-

age components inside the

device!

• Do not use harsh chemicals, clean-

ing solvents, or strong detergents

to clean the phone!

• Protect your phone from moisture

and humidity! Precipitation,

humidity and liquids contain min-

erals that will corrode electronic

circuits. Should your phone none-

theless become wet, disconnect it

immediately from any power sup-

ply and/or remove the battery,

and leave the open phone to dry

at room temperature!

The suggestions given above apply

equally to your phone, battery,

charger and all accessories. If any of

these parts are not working properly,

take them to your nearest qualified

service outlet. The personnel there

will assist you and, if necessary,

repair the device.

• Do not use or store the phone in

dusty, dirty areas. Its moving parts

may become damaged.

• Do not store your phone in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries and

warp or melt certain plastics.

• Do not store your phone in cold

areas. When the phone warms up

again (to its normal ambient tem-

perature), moisture can form

inside the phone, which may dam-

age electronic components.

Product data

125

Phone ID

Product data

You will need the following information if

you lose your phone or SIM card:

the number of the SIM card (on the card):

..............................................................

15-digit serial number of the phone

(under the battery):

Declaration of conformity

Siemens Information and Communi-

cation mobile hereby declares that

the phone described in this user

guide is in compliance with the

essential requirements and other rel-

evant provisions of European Direc-

tive 1999/5/EC (R&TTE). The declara-

tion of conformity (DoC) concerned

has been signed. Please call the com-

pany hotline if you require a copy of

the original or visit:

..............................................................

the customer service number of the service

provider:

..............................................................

Lost phone

If you lose your phone or SIM card contact

your service provider immediately to pre-

vent misuse.

www.siemens-mobile.com/conformity

Operating times

Technical data

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

GSM class:

Frequency range: 880–960 MHz

GSM class: 1 (1 watt)

Frequency range: 1,710–1,880 MHz

GSM class: 1 (1 watt)

Frequency range: 1,850–1,990 MHz

4 (2 watt)

Talktime: 100 to 300 minutes

Standby time: 60 to 250 hours

Action taken Time Reduction of

(min) standby time by

Weight:

Size:

98 g

109 × 48 × 18 mm

(85 ccm)

Calling

Light *

30–90 minutes

40 minutes

Li-Ion battery:

750 mAh

Operating temp.: –10 °C to +55 °C

SIM card: 1.8 or 3.0 V

Network

5–10 minutes

* Key input, games, organiser etc.

126

Accessories

Fashion & Carry

Handsfree portable

Carrying Cases

Headset HHS-500

A range of carry cases is available at spe-

cialist shops or you can visit the Siemens

Mobile Store online at:

Simple headset without PTT key

Headset HHS-510

Headset with PTT key to accept and end

calls.

Siemens Original Accessories

www.siemens-mobile.com/

shop

Headset Purestyle HHS-610

High quality headset with removable ear-

piece and PTT key.

Bluetooth™ Headset

Energy

HHB-600 with EU power supply unit

HHB-610 with UK power supply unit

HHB-620 with Australian power supply unit

Li-Ion Battery (750 mAh) EBA-660

Spare battery

Travel Charger

ETC-500 with EU power supply unit

ETC-510 with UK power supply unit

Elegant, small, easy to wear Bluetooth™

headset.

Office

Travel charger with an extended input

voltage range of 100–240 V.

Data Cable DCA-500

Car Charger Plus ECC-600

For connecting the phone to the serial

RS232 port of the PC.

Charger for the cigarette lighter socket in

the car. It is possible to make phone calls

during charging.

Data Cable USB DCA-540

For connecting the phone to the USB port of

the PC. With charging function.

Accessories

127

Car Kit Bluetooth™ HKW-600

Multitainment

Innovative Bluetooth™ handsfree kit with an

external display for making in-car calls safely

and conveniently.

Plug-in Flash IFL-600

Plug-in flash module for taking photos in

areas with low ambient light.

Optional car kit accessories

Car Data Adapter HKO-690

Phone-In Adapter HKO-570

Car Solutions

Mobile Holder Antenna HMH-670

The cradle for connecting an external

antenna. Ideal for use with headset PTT or

car kit portable.

Can also be used as cradle for retrofitting

your handsfree car kit (series 55).

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Siemens Original Accessories

Car Kit Comfort HKC-670

www.siemens-mobile.com/

shop

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Includes all

components needed for installation. The

individual antenna solution is available in

specialist shops.

Car Kit Easy HKP-600

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and the flexible microphone position-

ing, the telephone can be optimally adjusted

to suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

128

Quality

Battery quality

declaration

Display quality

declaration

The capacity of your mobile phone

battery will reduce each time it is

charged/discharged. Storage at too

high or low temperatures will also

result in a gradual capacity loss. As

a result the operating time of your

mobile phone may be considerably

reduced, even after a full recharge of

the battery.

For technological reasons, some

small dots in other colours may

appear in the display in rare cases.

Please remember that if some dots

appear brighter or darker in the dis-

play, this generally does not mean

that a fault has occurred.

Regardless of this, the battery has

been designed and manufactured so

that it can be recharged and used for

six months after the purchase of

your mobile phone. After six months,

if the battery is clearly suffering from

loss of performance, we recommend

that you replace it. Please buy only

Siemens original batteries.

Guarantee certificate (UK)

129

Guarantee certificate (UK)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer's Guarantee under the condi-

tions set out below:

• This Guarantee shall apply to new devices

purchased in the European Union.

For Products sold in the United Kingdom

the Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. For wearing parts

(e.g., batteries, keypads, housings, small

parts on housings, protective coverings

where included in the scope of delivery),

this durability guarantee shall be valid for

six months from the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

treatment and/or failure to comply with

information contained in the user manuals.

• This Guarantee shall not apply to or

extend to services performed by the

authorised dealer or the customer them-

selves (e.g. installation, configuration,

software downloads). User manuals and

any software supplied on a separate data

medium shall be excluded from the Guar-

antee.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer's liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

130

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer’s Guarantee under the condi-

tions set out below:

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casing), this

warranty shall be valid for six months from

the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

care or use and/or failure to comply with

information contained in the user manuals.

In particular claims under the Guarantee

cannot be made if:

• The device is opened (this is classed as

third party intervention)

• Repairs or other work done by persons not

authorised by Siemens.

• Components on the printed circuit board

are manipulated

• The software is manipulated

• Defects or damage caused by dropping,

breaking, lightning or ingress of moisture.

This also applies if defects or damage was

caused by mechanical, chemical, radio

interference or thermal factors (e.g.:

microwave, sauna etc.)

• Devices fitted with accessories not author-

ised by Siemens

• This Guarantee shall not apply to or

extend to services performed by the

authorised dealer or the customer them-

selves (e.g. installation, configuration,

software downloads). User manuals and

any software supplied on a separate data

medium shall be excluded from the Guar-

antee.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

• This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford

Industrial Estate, Dublin 18 – The Republic

of Ireland.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer’s liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens helpdesk on 1850 777 277. This

number is also to be found in the accompa-

nying user guide.

SAR – European Union (RTTE)

131

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

EN 50360. The SAR of mobile

phones is determined in accordance

with the European Norm EN 50361.

This involves measuring the maxi-

mum value in all frequency bands of

the mobile phone with the phone

transmitting at its highest power

level. The actual SAR level of the

phone during normal operation may

be well below the maximum value.

This is because the phone is

designed to operate at multiple

power levels so as to use only the

power required to reach the net-

work. In general, the closer you are

to a base station, the lower the

power output.

THIS MOBILE PHONE MEETS THE

LIMITS SET BY THE EU (1999/519/EC)

FOR PROTECTION OF THE HEALTH

OF THE PUBLIC FROM THE EFFECTS

OF EXPOSURE TO ELECTROMAGNETIC

FIELDS

These limits are part of comprehen-

sive recommendations for the pro-

tection of the public. The recom-

mendations were developed and

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific

studies*. The limits include a sub-

stantial safety margin designed

to assure the safety of all persons,

regardless of age and health.

The highest SAR value for this phone

model when tested for compliance

against the standard was

Before a radio equipment may be

placed on the market, compliance

with the European laws and the

respective technical limit require-

ments must be demonstrated. Only

then the CE mark may be affixed**.

The limit for mobile phones recom-

mended by the Council of the

European Union employs a unit of

measurement known as the Specific

Absorption Rate, or SAR. This SAR

limit is 2.0 W/kg***. This corre-

sponds with the requirements of the

International Commission for Non-

Ionizing Radiation Protection ICNIRP

and was adopted into the European

Norm for Mobile Radio Equipment

0.48 W/kg****.

You can also find the SAR value for

this device on the Internet at this

address www.siemens-mobile.com

While there may be differences

between the SAR levels of various

phones and at various positions, all

Siemens products meet the legal

requirements.

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states

that present scientific information does not

indicate the need for any special precautions

for use of mobile phones.

132

SAR – European Union (RTTE)

Further information:

www.who.int/peh-emf, www.mmfai.org,

www.siemens-mobile.com

** The CE mark confirms that the product is

in compliance with the legal requirements of

the European Union as a prerequisite for the

placing on the market and the free

movement of goods within the European

internal market.

*** averaged over 10 g body tissue.

**** SAR values may vary depending on

national requirements and frequency bands.

SAR information for different regions can be

found at www.siemens-mobile.com

SAR – International (ICNIRP)

133

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

power level. The actual SAR level of

the phone during operation can be

well below the maximum value. This

is because the phone is designed to

operate at multiple power levels so

as to use only the power required to

reach the network. In general, the

closer you are to a base station, the

lower the power output.

THIS MOBILE PHONE MEETS THE

LIMITS FOR PROTECTION OF THE

HEALTH OF THE PUBLIC FROM THE

EFFECTS OF EXPOSURE TO ELECTRO-

MAGNETIC FIELDS

Your mobile phone is a radio trans-

mitter and receiver. It is designed

and manufactured not to exceed

the limits for exposure to radio fre-

quency (RF) energy recommended

by international guidelines from the

International Commission on Non-

Ionizing Radiation Protection

The highest SAR value for this model

phone when tested for use at the ear

0.48 W/kg***.

SAR information can also be found

at www.siemens-mobile.com

(ICNIRP). These limits are part of

comprehensive guidelines for the

protection of the public and estab-

lish permitted levels of RF energy for

the population. The guidelines were

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific

studies*. The limits include a sub-

stantial safety margin designed

to assure the safety of all persons,

regardless of age and health.

While there may be differences

between the SAR levels of various

phones and at various positions,

they all meet the international

guidelines for safe RF exposure.

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states

that present scientific information does not

indicate the need for any special precautions

for use of mobile phones.

The exposure limit for mobile

phones employs a unit of measure-

ment known as the Specific Absorp-

tion Rate, or SAR. The SAR limit

statedin theinternationalguidelines

is 2.0 W/kg**. Tests for SAR are con-

ducted in all frequency bands using

standard operating positions with

the phone transmitting at its highest

Further information:

www.who.int/peh-emf, www.mmfai.org,

www.siemens-mobile.com

** averaged over 10 g of tissue.

*** SAR values may vary depending on

national requirements and frequency bands.

information for different regions can be

found at

www.siemens-mobile.com

134

Menu tree

Default book

Show entries

Business card

Groups

Default book

Call records

Calls missed

Calls received

Calls dialled

Delete records

Time/charge

All calls

All incom.calls

All outgoing

Remain. units

Charge sett.

Personal rate

Charge limit

Auto display

Surf & fun

URL/service provider

Games

Applications

Downl. assist.

Bookmarks

Internet

Camera

SMS

Messages

Create new

MMS

E-mail

Inst. message

Menu tree

135

Messages

Inbox

SMS

MMS

E-mail

WAP push

Retr. e-mail

Send/rec. mail

CB services

Draft

SMS

MMS

E-mail

Unsent

SMS

MMS

E-mail

Retr. e-mail

Send/rec. mail

Sent

SMS

MMS

E-mail

MMS templates

SMS archive

Text modules

Message setup

Text zoom

SMS

SMS profiles

SMS signature

MMS

MMS profile:

User settings

Help

136

Menu tree

Messages

Message setup

E-mail

Accounts

General sett.

Help

WAP push set.

Security sett.

Help

Voice message

CB services

Receive CB

Topic list

Organiser

Calendar

Appointments

Tasks

CB languages

Notes

Missed appts.

Dictat.machine

Time zones

Calendar setup

Extras

SIM services

Alarm clock

Sound recorder

Calc.

Unit converter

Stopwatch

Countdown

Remote syncr.

My stuff

Setup

Profiles

Themes

Display

Language

Text input

Wallpaper

Logo

T9 preferred

Input language

Colour skin

Menu tree

137

Setup

Display

Screensaver

Start up anim.

Shutdn anim.

Own greeting

Big letters

Illumination

Contrast

Ringtones

Ringer setting

Silent alert

Volume

Incoming call

Messages

Alarm clock

Organiser

System

d Calls

Applications

Group calls

Other calls

More melodies

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

Call setup

Hide ID

Call waiting

Divert

All calls

Call screening

Any key answ.

Minute beep

Not reachable

No reply

Busy

Receiving fax

Receiving data

Status check

Clear all

138

Menu tree

Setup

Phone setup

Key tones

Info tones

Automatic switch off

Phone identity

Memory assis.

My stuff

Format

Master reset

Clean up

Format card

Eject card

Clock

Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time zone

Connectivity

GPRS

GPRS info

IrDA

Bluetooth

Search all

Known devices

Last connect.

Black list

My BT name

Visib.to others

Help

Data services

HTTP profile

Authentication

Fax/data

Send voice/fax

Rec. voice/fax

Rec fax/data

Security

Auto key lock

Direct call

Only ‚

Menu tree

139

Setup

Security

Codes

PIN control

This SIM only

Change PIN

Change PIN2

Chg.phonecode

Barrings

All outgoing

Outgoing intl.

Out.int.x.home

All incoming

When roaming

Status check

Clear all

Network

Line

Select line

Network info

Choose netwrk

Auto network

Pref. network

Band selection

Fast search

User group

Protected

Active

Select group

All outgoing

Pref. group

Accessories

Car Kit

Auto answer

Automatic switch off

Car loudspk.

Headset

Auto answer

140

Index

Buddh. year ................................87

Business card ..............................3 1

Busy number...............................2 5

Accessories............................... 126

Addressbook

Dial entry................................ 34

Groups ................................... 35

New entry............................... 32

Read entry .............................. 34

Aircraft mode ............................. 77

Alarm

Alarm clock........................... 108

Type ..................................... 104

Alarm clock .............................. 108

All calls (diversion) ..................... 84

All incoming (barrings) ............... 95

Answering service (external)....... 62

Any key to answer ...................... 84

Appointments .......................... 103

Authentication ........................... 93

Auto display

Clock ...................................... 87

Duration/charges .................... 40

Auto key lock.............................. 94

Auto time zone................... 87, 107

Auto. network dialling ................ 96

Auto. redial ................................ 25

Automobile accessories ............ 127

Calculator .................................1 10

Calendar ...................................1 02

Call

Ac cept/end..............................2 6

Ba rrin g ....................................9 5

Charges...................................4 0

Conference .............................2 7

Divert......................................8 3

End.........................................2 4

Hold........................................2 6

Menu......................................2 8

Reject......................................2 6

Swap be tween calls (change)... 26

Call back .....................................2 5

Call divert ...................................8 3

Call screening .............................8 4

Call trans fer ................................2 8

Call wai ting........................... 27, 83

Calling ........................................2 4

Calls dialled (call record) .............39

Calls rec eived (call record)...........3 9

Camera.......................................4 1

Car Kit

Band selectio n ............................ 97

Battery

Accessories ...........................1 27

Se ttin g ....................................9 8

Car kit accessorie s .....................1 27

Care of phon e ...........................1 24

Cell Broa dcast (CB )......................7 0

Charges ......................................4 0

Charges/units..............................4 0

Charging the battery ...................11

Clock ..........................................87

Colour skin..................................79

Charge.................................... 11

Insert........................................ 9

Operating times.............. 12, 125

Quality Declaration ............... 128

Big letter s ................................... 80

Bluetooth ................................... 89

Bookmarks (WAP) ................. 71, 73

Browser...................................... 72

Index

141

Conference................................. 27

Connection profiles .................... 92

Connectivity ............................... 88

Contact lis t ................................. 64

Control code (DTMF) .................. 29

Converte r ................................. 110

Countdown .............................. 112

Credit limit ................................. 40

CSD settings ............................... 92

Currency converte r ................... 111

Customer care .......................... 122

Fax/data mod e ............................9 3

Flash...........................................4 2

Formatting (phone memory).......8 6

Formatting (SMS text).................45

Forwardi ng (call).........................2 8

Frequency rang e .........................9 7

Games an d applications ..............7 4

GPRS...........................................88

Groups........................................3 5

Guaran tee certificate ................1 29

Date format................................ 87

Default book .............................. 31

Dialling code .............................. 24

Dialling with number keys .......... 24

Dictating machine .................... 106

Digital Rights Management......... 14

Direct reply (SMS)....................... 49

Display

Hand set volume..........................2 4

Hand sfree talking........................2 6

Headset

Accessories ...........................1 26

Settin g ....................................9 8

Hide ID .......................................8 3

Highli ghting mod e ......................1 7

Hold call ............................... 26, 28

Home network............................96

Hotline .....................................1 22

HTTP profile ................................9 2

Illuminatio n ............................ 80

Language ............................... 79

Symbols.................................... 7

Wallpaper image..................... 79

Divert......................................... 83

Download .................................. 74

DTMF tones (tone sequences)..... 29

Duration/charge s ........................ 40

Identity number (IMEI )................8 5

IMEI numbe r ...............................8 5

Inbox..........................................4 4

Info ton es ...................................8 5

Information services (CB) ............7 0

Infrared (IrDA) ............................8 8

Input language (T9) ....................2 1

Inst. Message..............................63

International dialling code...........2 5

Internet ......................................71

E-mail

Lists........................................ 60

Setting s .................................. 61

Write ...................................... 59

Emergency number .................... 13

Extras....................................... 108

Joystick.........................................5

Fast access ............................... 100

Fast network search.................... 97

Key tones....................................85

142

Index

Language ................................... 79

Limit (duration/charges) ............. 40

Logo........................................... 79

Loss of phone, SIM car d ............ 125

Network

Barrin g ....................................9 5

Connection .............................96

Se ttings ..................................9 6

Notes........................................1 05

Mailbox...................................... 62

Maintenance of phone.............. 124

Master reset ............................... 86

Media player ............................ 114

Memory assistant ....................... 85

Controls.................................. 15

My men u ................................ 99

Speed dialling......................... 17

Menu speed dialling ................... 17

Menu tree ................................ 134

Message

CB .......................................... 70

E-mail ..................................... 59

MMS....................................... 51

SMS.................................. 45, 47

Message memory full. ................ 50

Message type ............................. 49

Microphone on/off................ 28, 43

Minute beep............................... 84

Missed appointments ............... 105

Missed calls (call record )............. 39

MMS

Lists........................................ 56

Receiv e ................................... 55

Send....................................... 54

Write ...................................... 51

Mobile Phone Manager............. 117

MultiMediaCard........................ 116

Muting (microphone) ........... 28, 43

My items .................................... 30

My menu.................................... 99

My stuff.................................... 115

One nu mber onl y ........................2 8

Only ‚ .....................................9 4

Operating times (battery).... 12, 125

Organiser..................................102

Own (p hone) numbers................3 8

Own greetin g..............................8 0

Phone code.................................1 8

Phone data ...............................1 25

Phone identity number (IMEI)......85

Phone number memo .................2 5

Phone number transmission

on/off......................................8 3

Phon e setup................................8 5

Phon ebook

Call an entry............................3 7

Ne w entr y ...............................3 6

Protec ted SIM..........................3 8

Special books ..........................3 8

VIP numbers............................38

Photo..........................................4 1

Pictures & sounds (SMS)..............4 6

Change ...................................1 8

Control....................................1 8

Enter.......................................1 3

Error .....................................1 21

PIN2 ...........................................18

Preferred networ k .......................9 6

Preventing accidental

activation................................19

Product data .............................125

Index

143

Profiles

MMS....................................... 57

SIM card

Clear barring ...........................1 9

Insert ........................................9

Prob lems...............................1 19

SIM servic es (optional) ..............1 08

SMS

Phone..................................... 76

SMS........................................ 49

WAP ....................................... 73

Prompt....................................... 25

Provider log o .............................. 79

PUK, PUK2.................................. 18

Archive ...................................4 8

Lists ........................................4 8

Profiles....................................4 9

Read .......................................4 7

Se ttings ..................................4 9

Signature ................................4 9

T9 input ..................................2 1

To group .................................4 6

Write.......................................4 5

Software versio n .........................8 5

SOS ............................................1 3

Sound recorder .........................1 09

Speci al book s ..............................3 8

Speci al characters .......................2 0

Speech time (battery) ...............1 25

Speed diall ing keys....................1 01

Stan dard functions......................1 6

Standby mode ............................1 4

Standby time ...................... 12, 125

Start up animation ......................8 0

Stop watch ................................1 11

Storage location (Phonebook) .....36

Surf & fun ...................................7 1

Swap ..........................................2 6

Switch off phone

Questions & Answers................ 119

Records ...................................... 39

Redial......................................... 24

Reminder ................................... 25

Remote synchronisation ........... 112

Ringtone settin g ......................... 81

Ringtone s ............................. 35, 81

Safety precautions........................ 3

Screensaver................................ 79

Second phone number ............... 96

Security...................................... 18

Security codes ............................ 18

Service centre (SMS)................... 49

Service provider portal................ 30

Service tone s .............................. 85

Set time/date.............................. 87

Settings...................................... 76

Short message (SMS).................. 45

Shown in the display .................... 7

Shut down animation ................. 80

Siemens City Portal..................... 30

Signal strength........................... 14

Silent alert.................................. 81

Au tomati c ...............................8 5

Manually.................................1 3

Switch on phone.........................13

Symbols........................................7

Synchronisation ........................112

144

Index

T9 text input............................... 21

Tasks........................................ 104

Technical data .......................... 125

Text entry

With T9................................... 21

Without T9 ............................. 20

Text module ............................... 23

Themes ...................................... 78

This SIM onl y .............................. 94

Time zones....................13, 87, 107

Unanswere d ............................... 83

Upper and lowercase letters

(T9) ........................................ 20

User group ................................. 97

Validity (SMS)............................. 49

Video mode................................ 42

Video playback ......................... 114

Voice message (mailbox )............ 62

Volume

Handset volume...................... 24

Profiles ................................... 76

Ringtone................................. 81

Wallpaper (display)..................... 79

WAP push................................... 44

Toshiba 512E User Manual
Stanton Deck Control Surface SCS1d User Manual
SpectraLink Z300I User Manual
Sony ICF C205 User Manual
Sony FX663 User Manual
Sony Ericsson WHITE PAPER P800 User Manual
Smart Technologies Smart Board Software 97 User Manual
Seagate CONSTELLATION ST32000445SS User Manual
Seagate Barracuda ST380013AS User Manual
Philips Streamium WAC5 User Manual