Sanyo S1 User Manual

USER GUIDE  
S1  
Table of Contents  
1. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Turning Your Phone Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Using the Phone Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Selecting Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Holding Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Missed Call Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
End-of-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Saving a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Finding a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Dialing and Saving Phone Numbers With Pauses . . . . . . . . . . . . . . . . .19  
Dialing from the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Using Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Using Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Selecting a Character Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . .23  
Entering Characters Using Alphabet Mode . . . . . . . . . . . . . . . . . . . . . .24  
Setting the Default Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
2. Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Adjusting the Phone’s Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . .27  
Selecting Vibrate Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Selecting a Tone Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Setting a Start-up/Power-off Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Using Voice Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Setting Up Key Press Echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Silence All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Changing the Phone’s Menu Style . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Changing the Backlight Time Length . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Changing the Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Changing the Font Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Changing the Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Changing the Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Changing the Display Screen Animation . . . . . . . . . . . . . . . . . . . . . . .33  
Changing the Display for Incoming Calls . . . . . . . . . . . . . . . . . . . . . . .33  
Changing the Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Changing the Clock/Calendar Display for Standby Mode . . . . . . . . . . .34  
Setting Return to Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Location Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Your Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Setting Message Notification Display . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Setting Push Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Editing Canned Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Setting Your Callback Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
Setting Your Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Setting Drafts Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
My Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Setting the Text Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Setting Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Auto Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Setting Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Headset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Setting Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Setting the Current Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Changing the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Setting Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
3. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Erasing Phone Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Resetting the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Resetting Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Using the Parental Control Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
4. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Recognizing Icons on the Display Screen . . . . . . . . . . . . . . . . . . . . . . .53  
Roaming on Other Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
5. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Menu Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
6. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Making a Call from Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Saving a Phone Number from Call History . . . . . . . . . . . . . . . . . . . . . . .57  
Prepending a Phone Number from Call History . . . . . . . . . . . . . . . . . . .58  
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
7. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Assigning a Group Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Finding Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Finding Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Finding Group Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . . . . . .62  
Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . .63  
Erasing a Contacts Entry from the List . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64  
Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .65  
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Dialing Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
8. Personal Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Displaying Your Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Setting Holidays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Adding an Event to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
Adding a Call Alarm to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . .69  
Adding To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70  
Adding a To Do List Item to the Schedule . . . . . . . . . . . . . . . . . . . . . . .70  
Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71  
Viewing Day’s Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71  
Event List Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71  
Erasing Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72  
Going to a Given Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72  
Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73  
Using the Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73  
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74  
Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74  
Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Displaying Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Finding Icon Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Displaying the Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Displaying Advanced Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
9. Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76  
Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76  
Making a Call Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . .76  
Programming Voice Dial Tag to Your Phone . . . . . . . . . . . . . . . . . . . . .76  
Voice Dial Tag Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77  
Erasing All Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77  
Managing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78  
Recording Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78  
Recording Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78  
Reviewing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79  
Erasing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79  
Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Activating Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Selecting an Announcement for Screen Call . . . . . . . . . . . . . . . . . . . . .80  
Recording Name for a Pre-Recorded Announcement . . . . . . . . . . . . . .80  
Recording a Customized Announcement . . . . . . . . . . . . . . . . . . . . . . .81  
Reviewing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
Erasing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
10. 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Starting 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Setting 10-4 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
10-4 Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Making and Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Displaying the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Selecting a Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Making a 10-4 Call (1-to-1 Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84  
Making a 10-4 Call (Group Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85  
Making a 10-4 Call by Entering a Number . . . . . . . . . . . . . . . . . . . . . . .85  
Missed Call Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . .86  
Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87  
10-4 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88  
Adding and Editing 10-4 Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .89  
Copying an Entry to your Personal List , Personal Group List,  
or Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
Saving a 10-4 Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
Finding an Entry in the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90  
Adding a New Contacts Entry to Your Personal List . . . . . . . . . . . . . . .90  
Adding a New Group to Your Personal Group List . . . . . . . . . . . . . . . .91  
Editing a Contacts Entry in Your Personal List . . . . . . . . . . . . . . . . . . . .92  
Editing a Group in Your Personal Group List . . . . . . . . . . . . . . . . . . . . .92  
Erasing 10-4 List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93  
Erasing an Entry in Your Personal List or Personal Group List . . . . . . . .93  
Erasing a 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93  
Updating the Personal List and Personal Groups . . . . . . . . . . . . . . . . . .94  
Managing 10-4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94  
Setting Speed Dialing for 10-4 Entries . . . . . . . . . . . . . . . . . . . . . . . . . .94  
Setting 10-4 Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Setting Ringer Types for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Setting the Ringer Volume for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . .95  
Setting a Vibrate Type for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Setting an Alert Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . .96  
Setting the Speakerphone for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . .96  
Selecting the Default View of the 10-4 List . . . . . . . . . . . . . . . . . . . . . .96  
Setting the Floor Display of the 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . .96  
11. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97  
New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97  
Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97  
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98  
Creating Folders for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99  
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100  
Erasing Selected Messages in All Folders . . . . . . . . . . . . . . . . . . . . . . . .100  
®
12. Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101  
Accessing the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . .101  
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101  
Bluetooth Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101  
Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Bluetooth Settings: Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Bluetooth Settings: Voice Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Bluetooth Settings: Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Bluetooth Settings: Device Information . . . . . . . . . . . . . . . . . . . . . . .103  
Setting Auto-Accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104  
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105  
Paired Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105  
Waiting for Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105  
Using the Trusted Devices Options . . . . . . . . . . . . . . . . . . . . . . . . . . .106  
Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107  
13. Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Voicemail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Displaying Voicemail Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . .109  
Clearing the Message Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Editing Your Voicemail Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110  
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110  
Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111  
Launching the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111  
Net Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111  
Browsing the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111  
Downloading through the Wireless Web . . . . . . . . . . . . . . . . . . . . . . .114  
14. Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115  
Maintaining Your Phone’s Peak Performance . . . . . . . . . . . . . . . . . . . .115  
Using Your Phone While Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115  
Following Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115  
Using Your Phone Near Other Electronic Devices . . . . . . . . . . . . . . . .116  
Turning Off Your Phone Before Flying . . . . . . . . . . . . . . . . . . . . . . . . .116  
Turning Off Your Phone in Dangerous Areas . . . . . . . . . . . . . . . . . . . .117  
Restricting Children’s Access to Your Phone . . . . . . . . . . . . . . . . . . . .118  
Protecting Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118  
Disposal of Lithium Ion (Li-Ion) Batteries . . . . . . . . . . . . . . . . . . . . . . .119  
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121  
S1  
User Guide  
1. The Basics  
Your Phone  
1. Earpiece  
2. Main LCD  
(display)  
3. Navigation Key  
13. LED Indicator  
12. Right Softkey  
4. Left Softkey  
5. MENU/OK Key  
11. END/POWER Key  
10. BACK Key  
6. TALK Key  
7. Keypad  
8. Microphone  
9. Internal Antenna  
14. 10-4 Key  
15. Side Volume Key  
16. Side SPEAKER  
Key  
18. Charger Jack  
19. Headset Jack  
17. Speaker  
(back of phone)  
2
Key Features  
1. Earpiece lets you hear the caller and automated prompts.  
2. MainLCD(display) displays all the information needed to  
operate your phone, such as the call status, the Contacts list,  
the date and time, and the signal and battery strength.  
3. NavigationKey lets you navigate quickly and easily through the  
menu options. These keys can also be reassigned to create  
customized shortcuts. Default settings are: Right: Contacts,  
Left: My Favourites, Up: Messaging, and Down: My Content.  
4. Softkey(left) lets you select the menu corresponding to the  
bottom left line on the Main LCD.  
5. MENU/OKKey lets you access the phone’s menus and select  
menu options.  
6. TALKKey lets you place or receive calls, answer Call Waiting,  
use Three-Way Calling, or activate Voice Dial.  
7. Keypad lets you enter numbers, letters, and characters, and  
navigate within menus. Press and hold keys 2-9 for speed  
dialing.  
8. Microphone allows other callers to hear you clearly when you  
are speaking to them.  
9. InternalAntenna facilitates reception and transmission. To  
maximize call performance, do not obstruct the internal  
antenna area. (See page 11.)  
10. BACKKey lets you display the previous page or clear characters  
from the screen.  
11. END/POWERKey lets you turn the phone on/off, end a call, or  
return to standby mode. While in the main menu, it returns  
the phone to standby mode and cancels your input. When you  
receive an incoming call, press to enter silent mode and mute  
the ringer.  
12. Softkey(right) lets you select the menu corresponding to the  
bottom right line on the Main LCD.  
13. LEDIndicator shows your phone’s connection status at a glance.  
14. 10-4Key allows you to access 10-4 List.  
(See “10-4” on page 82.)  
3
15. SideVolumeKey allows you to adjust the ringer volume in  
standby mode or adjust the voice volume during a call. To  
mute the ringer during an incoming call, press the volume key  
up or down. The volume key can also be used to scroll up or  
down to navigate through the different menu options.  
16. SideSPEAKERKey lets you place or receive calls in  
speakerphone mode.  
17. Speaker lets you hear different ringers and sounds. The  
speaker also lets you hear the caller’s voice in speakerphone  
mode.  
18. ChargerJack connects the phone to the phone charger  
(included) or an optional USB Cable.  
19. HeadsetJack allows you to plug in an optional monaural  
headset for convenient, hands-free conversations.  
CAUTION! Inserting an accessory into the incorrect jack may  
damage the phone.  
4
Viewing the Display Screen  
Thislistidentifiesthesymbolsyou’llseeonyourdisplayscreen.  
indicates your current signal strength. The more lines  
you have, the stronger your signal.  
means your phone cannot find a signal.  
indicates the call is on hold.  
indicates a call is in progress.  
indicates the 10-4 service is available.  
indicates the 10-4 service is unavailable.  
indicates the 10-4 service is enabled and the  
speakerphone mode is set to on.  
indicates you have missed 10-4 calls.  
indicates 1X Data/10-4 access is dormant. (Voice calls  
can still be made or received.)  
indicates 1X Data/10-4 access is active.  
indicates 1X Data/10-4 access is disabled.  
indicates 1X Service is available.  
indicates you are off the home network.  
indicates you have missed voice calls.  
indicates you have scheduled events or call alarms.  
indicates you have alarm clock notifications.  
indicates you have new text messages or Web Alerts  
waiting.  
indicates you have new picture messages.  
indicates you have new voicemail messages.  
indicates you have urgent messages.  
indicates you have two or more different types of missed  
alerts (missed voice calls and other missed alarm clocks,  
call alarms, or scheduled events).  
indicates the Bluetooth feature is enabled (blue icon).  
indicates the handset is connected to a Bluetooth device  
(green icon).  
5
indicates the handset is discoverable by another  
Bluetooth device.  
indicates the handset is communicating with a Bluetooth  
device.  
indicates your access to a secure site.  
shows the level of your battery charge. The more black  
you see, the more power you have left. (The icon is  
animated while the battery is charging.)  
indicates your battery is charging in “Power Off” state.  
indicates all the sound settings (except for applications)  
are off and the vibrate feature is set.  
indicates volume level 1 to 8 and vibrate feature are set.  
indicates a beep sounds once when you receive a phone  
call or message, etc.  
indicates a beep sounds once when you receive a phone  
call or message, etc. and vibrate feature is set.  
indicates all ringer settings are off.  
indicates all ringer settings are off and the vibrate feature  
is set.  
indicates all the sound settings are Off.  
indicates the Location Service of your phone is enabled.  
indicates the Location Service of your phone is disabled.  
indicates you have a new voice message when Screen  
Call is activated.  
indicates the Screen Call auto setting is enabled.  
indicates the Alarm Clock is set.  
indicates your phone is in TTY mode.  
indicates the speakerphone mode is set to on.  
indicates a call is in progress using the Bluetooth device.  
indicates the wired headset device is set to on.  
6
Turning Your Phone On and Off  
Turning Your Phone On  
Press and hold  
.
Once your phone is on, it displays “Looking for service...” which  
indicates that your phone is searching for a signal. When your  
phone finds a signal, it automatically enters standby mode. At  
this point, you are ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of  
searching, a Power Save feature is automatically activated.  
When a signal is found, your phone automatically returns to  
standby mode.  
In Power Save mode, your phone searches for a signal  
periodically without your intervention. You can also initiate a  
search for service by pressing any key (when your phone is  
turned on).  
Tip: The Power Save feature helps to save your battery power when you  
are in an area where there is no signal.  
Turning Your Phone Off  
Press and hold  
for two seconds until you see the  
powering down animation on the display screen.  
Your screen remains blank while your phone is off (unless the  
battery is charging).  
7
Using the Battery  
Installing the Battery  
1. Insert the battery into the opening on the back of the phone  
and gently press down.  
2. Place the battery cover into the position as indicated in the  
diagram, and slide it until you hear it snap into place. Then,  
slide the battery release latch.  
1
2
3
Removing the Battery  
Warning! Do not handle a damaged or leaking Li-Ion battery as you can  
be burned.  
1. Make sure the power is off so that you don’t lose any stored  
numbers or messages. Slide the battery release latch, and then  
slide the battery cover and remove it.  
2. Use your thumbnail to lift and then remove the battery as  
indicated in the diagram.  
3
2
1
8
Charging the Battery  
Your phone comes with a rechargeable battery. You should  
charge the battery as soon as possible so you can begin using  
your phone.  
Keeping track of your battery’s charge is important. If your  
battery level becomes too low, your phone automatically turns  
off and you will lose all the information you were just working  
on. For a quick check of your phone’s battery level, glance at the  
battery charge indicator located in the upper-right corner of  
your phone’s display screen. If the battery charge is getting too  
low, the battery icon  
warning message.  
appears and the phone displays a  
Always use a manufacturer-approved charger to charge your  
battery.  
Warning! Using the wrong battery charger could cause damage to your  
phone and void the warranty.  
Note: Long backlight settings, searching for service, vibrate mode, and  
browser use affect the battery’s talk and standby times.  
Using the Phone Charger  
1. Plug the charger into a wall outlet.  
2. Open the cover of the charger jack located on the side of your  
phone.  
3. Plug the other end of the charger into the phone’s charger  
jack (with the battery installed).  
9
Navigating Through Phone Menus  
The navigation key on your phone allows you to scroll through  
menus quickly and easily.  
To navigate through a menu, simply press the navigation key up  
or down. If you are in a first-level menu (after selecting an item  
in the main menu), you may also navigate to the next or previous  
first-level menu by pressing the navigation key right or left.  
For a diagram of your phone’s menu, please see “Menu  
Navigation” on page 54.  
Selecting Menu Items  
As you navigate through the menu, menu options are highlighted.  
Select any numbered option by simply pressing the  
corresponding number on the phone’s keypad. You may also  
select any item by highlighting it and pressing  
For example, if you want to view your last incoming call:  
1. Press to access the main menu.  
.
Note: You can select List View or Grid View for your phone’s menu style  
(see “Changing the Phone’s Menu Style” on page 31).  
2. Select CallHistory by highlighting it and pressing  
or by  
pressing  
(when in List View).  
3. Select Incoming by pressing  
or by highlighting it and  
pressing . (If you have received any calls, they are displayed  
on the screen.)  
Note: For the purposes of this guide, the above steps condense into  
“Select  
> Call History > Incoming.”  
10  
Displaying Your Phone Number  
Select  
>Settings>PhoneInfo>MyPhone#. (Your phone  
number and other information about your phone will be  
displayed.)  
Tip: You can also display your phone number through the Contacts menu.  
Select  
> Contacts > My Name Card. To send your contact information  
using Bluetooth, press  
(right softkey) > Send Contact.  
Options  
Making and Answering Calls  
Holding Your Phone  
To maximize performance, do not obstruct the bottom portion  
of your phone where the internal antenna is located while using  
the phone.  
Correct  
Incorrect  
Internal Antenna  
Making Calls  
Toplaceacall:  
1. Make sure your phone is on.  
2. Enter a phone number from standby mode. (If you make a  
mistake while entering, press to erase one digit at a time.  
Press and hold to erase the entire number.)  
3. Press or  
4. When you’re finished, press  
.
.
Tip: You can also place calls from your phone by using speed dialing  
(page 20), and by using your Call History listings (page 56) and by  
using Voice-Activated Dialing (page 76).  
To redial your most recent call, press and hold  
again.  
and press  
Note: If Sleep Mode is set to on, Main LCD will be turned off after the  
selected interval during a call. (See page 34 for Sleep Mode.)  
11  
Dialing Options  
Dialing options are displayed when you press  
(right  
Options  
softkey) after entering numbers in standby mode.  
Abbrev. Dial to use the Abbreviated Dialing feature. (See  
“Setting Abbreviated Dialing” on page 43 and “Using  
Abbreviated Dialing” on page 21.)  
Call to dial the phone number.  
Call:SpeakerOn to dial the phone number in speakerphone  
mode.  
SendText to send a text message (see page 98).  
SavePhone# to save the phone number in your Contacts. (See  
“Saving a Phone Number” on page 18.)  
Find to display Contacts entries that end with the digits you  
entered. (See “Finding a Phone Number” on page 18.)  
P HardPause to insert a hard pause. (See “Dialing and Saving  
Phone Numbers With Pauses” on page 19.)  
T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and  
Saving Phone Numbers With Pauses” on page 19.)  
Hyphen to insert a hyphen manually where you like.  
12  
Answering Calls  
Toansweranincomingcall:  
1. Make sure your phone is on. (If your phone is off, incoming  
calls go to voicemail.)  
2. Press  
or  
to answer an incoming call.  
Your phone notifies you of incoming calls in the following ways:  
The phone rings and/or vibrates.  
The LED flashes.  
The backlight illuminates.  
The screen displays an incoming call message.  
If available, the phone number of the caller is displayed.  
If the phone number is in your Contacts, the Contacts entry’s  
name is displayed.  
The following options are also displayed by pressing  
(right softkey).  
Options  
Answer to answer the call.  
Answer:Speaker to answer the call in speakerphone mode.  
SelectAudio to switch the call to your desired device (if  
available).  
AnsweronHold to put the call on hold. (See “Setting Answer  
on Hold” on the next page.)  
ScreenCall to answer the call by using pre-recorded  
announcement. (See “Setting Up Screen Call” on page 80.)  
QuietRinger to mute the ringer. (This feature appears when  
the ringer is set.)  
Tip: Your phone offers additional ways to answer calls. (See page 42 for  
"Setting Any Key Answer" and for "Auto Answer Mode".)  
13  
SettingAnsweronHold  
This feature allows you to hold an incoming call when you  
cannot answer immediately.  
TosetAnsweronHold:  
Options  
When you receive an incoming call, press  
(right  
softkey) >AnsweronHold.  
(The caller hears a message while waiting for you to answer.  
will display on the screen while the call is on hold.)  
Toresumethecall:  
Answer  
Press  
(left softkey) or  
.
Ending a Call  
Press  
.
Missed Call Notification  
When an incoming call is not answered, the missed call log is  
displayed on your screen.  
Tocallthemissedcallentryfromthenotificationscreen:  
Call  
Press  
(left softkey).  
Tip: If you have two or more notifications, the Missed Alerts list will  
appear.  
TodisplaytheMissedAlertslistfromstandbymode:  
1. Select  
>MissedAlerts.  
2. Select the entry you wish to view and press  
.
14  
Calling Emergency Numbers  
You can place calls to 911 (dial  
and press  
),  
even if your phone is locked or your account is restricted. Once  
Options  
the connection is established, press  
display 911 options:  
(right softkey) to  
SpeakerOn to activate speakerphone mode. (If you are in  
speakerphone mode, the option will appear as SpeakerOff to  
deactivate.)  
UnlockPhone to unlock your phone (appears only if the phone  
is locked).  
CloseMenu to close the pop-up menu (appears only if the  
phone is unlocked).  
My Phone  
an emergency call.  
Tip: Press  
(left softkey) to display your phone number during  
Emergencymodeoptions:  
If you end the emergency call by pressing  
, the phone enters  
Options  
the Emergency mode. Press  
Emergency mode options:  
(right softkey) to display the  
Call911 to call 911 again.  
Call911:Spkr. to call 911 in speakerphone mode.  
ExitEmergency to exit Emergency mode.  
Note: Emergency mode automatically times out after 5 minutes.  
15  
In-Call Options  
During a call, your phone displays menu options by pressing  
Options  
(right softkey).  
Flash to answer an incoming call while putting the current call  
in Call Waiting or connect a third party for a Three-Way Call.  
Mute or Unmuteto mute or reactivate your phone’s  
microphone.  
Mute  
Tip: Press  
(left softkey) to mute the phone’s microphone for  
privacy. Press it again to unmute it.  
TransferAudio to switch the call to an external device (if  
applicable).  
SpeakerOn or SpeakerOff to activate or deactivate  
speakerphone mode.  
SpeakerOn to route the phone’s audio through the  
speaker. (You can adjust the speaker volume using  
.)  
SpeakerOff to use the phone’s earpiece.  
Warning! Due to higher volume levels, do not place the phone near your  
ear during speakerphone use.  
Three-WayCall to call a third party.  
MissedAlerts to display missed notifications.  
CallHistory to access the Call History menu. (See “Managing  
Call History” on page 56.)  
Contacts to access the Contacts menu. (See “Using Contacts”  
on page 59.)  
Messaging to access the Messaging menu.  
Tools to access the Tools menu.  
Settings to access the Settings menu.  
Note: Flash appears only in Call Waiting and in Three-Way Calling. Mute  
does not appear during a 911 call.  
During a call, use  
or press the navigation key up or down  
to adjust the receiver volume.  
16  
End-of-Call Options  
Options  
To display the following options, press  
(right softkey)  
within 10 seconds after disconnecting a call.  
CallAgain to dial the phone number.  
Call:Speaker On to dial the phone number in speakerphone  
mode.  
SendText to send a text message.  
Send Text  
Tip: You can also choose to send a message by pressing  
softkey).  
(left  
SavePhone# to save the phone number in your Contacts.  
ShowContact appears when the number is already in your  
Contacts. (See “Saving a Phone Number” on page 18.)  
Note: The End-of-Call options are not displayed for calls identified as  
No Caller ID, restricted ID (Private) or Unavailable ID.  
17  
Saving a Phone Number  
Your phone can store up to seven phone numbers in each of  
200 Contact entries with up to 500 total numbers. Each entry’s  
name can contain 32 characters. Your phone automatically sorts  
the Contacts entries alphabetically. (For more information, see  
“Using Contacts” on page 59.)  
Options  
1. Enter a phone number and press  
(right softkey) >  
SavePhone#.  
2. Select NewName or FromContacts.  
NewName to create a new Contacts entry for the  
number.  
FromContacts to save the number to an existing entry.  
(This step is not necessary on the very first entry in your  
Contacts.)  
3. Select a label and press  
.
4. Enter a name for the new entry using the keypad and press  
.
– or –  
Search for an existing contact name and press  
new number.  
to save the  
Save  
Done  
(left softkey).  
5. Press  
(left softkey) >  
Finding a Phone Number  
You can search Contacts entries for phone numbers that contain  
a specific string of numbers.  
1. Enter the last four or more digits of the number in standby  
mode. (The more numbers you enter, the more specific the  
search becomes.)  
Options  
2. Press  
(right softkey) >Find. (The Contacts entry  
matching the entered numbers will be displayed.)  
3. Highlight your desired entry.  
Press  
Press  
to display the entry details.  
or to dial.  
18  
Dialing and Saving Phone Numbers With Pauses  
You can dial or save phone numbers with pauses for use with  
automated systems, such as voicemail or credit card billing  
numbers.  
There are two types of pauses available on your phone:  
HardPause to send the next set of numbers when you press  
.
2-Sec. Pause toautomatically send the next set of numbers  
after two seconds.  
Note: You can have multiple pauses in a phone number and combine  
2-second and hard pauses.  
Options  
1. Enter the phone number and press  
(right softkey).  
2. Select either HardPause or 2-Sec. Pause. Hard Pause is  
displayed as a “P” and 2-second pause as a “T”.  
3. Enter additional numbers.  
4. To dial the number, press  
with a hard pause, press  
– or –  
or  
. (When dialing a number  
to send the next set of numbers.)  
Options  
To save the number in your Contacts, press  
softkey) > SavePhone#.  
(right  
Note: The use of Hard Pause or 2-Sec. Pause will disengage the ability  
to adjust the volume level of the call using  
.
19  
Dialing from the Contacts List  
1. Select  
2. Select the entry you want to call and press  
3. Highlight the number you wish to call and press  
>Contacts>Find/AddEntry.  
.
.
Note: The icon next to each entry represents the labels (for example,  
Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle  
next to the icon means there are other phone numbers for the entry.  
Press the navigation key right or left to select other number.  
Using Speed Dialing  
With this feature, you can dial your favourite entries using one  
key press for locations 2-9. (See “Assigning Speed Dial Numbers”  
on page 64.)  
Tousespeeddial:  
From standby mode, press and hold the appropriate key for  
approximately two seconds.  
The display confirms that the number has been dialed when it  
shows “Connecting...”.  
20  
Using Abbreviated Dialing  
Abbreviated Dialing is similar to speed dialing. You can use  
either of the following abbreviated dialing features.  
ContactsMatch to retrieve any desired number saved in your  
Contacts by entering only the last three to six digits of the  
number.  
Prepend to predefine the first five- or six-digit prefix you wish  
to use for abbreviated dialing, so that you can dial a number by  
entering only the last four or five digits of the number.  
Above feature becomes available when you enable  
Abbreviated Dialing feature. (See “Setting Abbreviated  
Dialing” on page 43.)  
Toplaceacallusingabbreviateddialing:  
1. Enter the last 3-6 digits of a Contacts entry’s phone number  
saved in your Contacts.  
– or –  
Enter the last four or five digits of your desired number to use  
the prepend feature.  
2. Press  
or  
.
Note: If the digits match more than one entry, the Abbrev. Dial list will  
be displayed; highlight the correct entry and press  
again.  
or  
When Prepend is set to Enable and Contacts Match is set to  
Disable, you can display the 10-digit number (including the  
predefined prepend number) by entering the last four or five digits  
of the number.  
When both Contacts Match and Prepend are set to Enable and  
your desired number is not saved in Contacts, you can display  
the 10-digit number (including the five- or six-digit prepend  
number) by entering the last four or five digits of the number.  
21  
Entering Text  
Selecting a Character Input Mode  
Your phone provides convenient ways to enter words, letters,  
punctuation, and numbers whenever you are prompted to enter  
text (for example, when adding a Contacts entry or when  
sending text messages).  
1. When you display a screen where you can enter text,  
Mode  
press  
(right softkey).  
2. Select a character input mode and press  
.
Note: The menus displayed vary according to the entry field. If you see  
triangles on the right of the menu, you can press the right and left  
navigation keys to switch between related menus.  
Alphabet to enter characters by using the keypad (see  
page 24).  
T9Word to enter characters using T9 Text Input (see  
page 23).  
SYMBOL to enter symbols.  
SMILEYS to enter smiley pictures.  
Emoticons to enter an emotion icon.  
WebShortcut to enter web shortcuts (for example, www.,  
http://, or .com).  
CannedMsgs to enter canned messages (see page 37).  
RecentMsgs to enter messages used recently (if  
applicable).  
Paste to paste copied or cut text (if applicable).  
NUMBER to enter numbers.  
FromToDotousewordsyouaddedinyourCalendarasTo  
Do Items (see page 70).  
Signature to enter your signature (see page 39).  
SelectLang. to select the language (English or French).  
EraseAll to erase all text (if applicable).  
SelectText to select stored text for copying or cutting.  
AddWord to store words that you use frequently.  
TextOptions to display the Text Entry settings menu  
(see page 42).  
22  
Shift  
Tip: Before entering text, press  
to change letter capitalization style  
: Abc > ABC > abc (Alphabet Mode)  
: T9w > T9W > t9w (T9 Text Input Mode).  
Entering Characters Using T9 Text Input  
T9 Text Input lets you enter text in your phone with just one  
keypress per letter. (To select the T9Word mode when entering  
text, see “Selecting a Character Input Mode” on page 22.)  
T9 Text Input analyses the letters you enter using an intuitive  
word database and creates a suitable word. (The word may  
change as you type.) To accept a word and insert a space,  
press  
or  
.
Tip: In order to insert a space by pressing , Auto-Space must be on  
(see page 42).  
If you make a mistake, press  
to erase a single character.  
Press and hold  
to delete an entire entry.  
AddingaWordtotheT9Database  
If a word you want to enter does not display as an option when  
you are using T9 Text Input, you can add it to the database.  
ToaddawordtotheT9TextInputdatabase:  
Mode  
1. Press  
(right softkey) >AddWord.  
Save  
2. Enter the word using Alphabet Mode and press  
(left  
softkey).  
Toeditorerasethewordsyouhaveadded:  
Mode  
1. Press  
(right softkey) >TextOptions>MyWords.  
Options  
2. Highlight your desired word and press  
(right softkey).  
3. Select an option and press  
.
Edit to edit a word in My Words.  
Erase to erase a word in My Words.  
Note: You can add, edit, or erase a word from standby mode. Select  
> Settings > Others > Text Entry > My Words.  
23  
CustomizingtheT9Settings  
Mode  
1. Press  
(right softkey) >TextOptions>T9Settings.  
– or –  
From standby mode, select  
>Settings>Others>TextEntry>  
T9Settings.  
2. Select an option and press  
.
WordPredictionto automatically display the word that  
may follow the current text input.  
Word Completion to show the completed words that match  
the keys you have entered without entering the whole  
word.  
WordScanto allow T9 text input to recognize words by  
searching Contacts and messages.  
WordChoiceList to display word choice list.  
Showaftenter to select digits number (1-3 digits) to  
display the words choice list. The word choice list will be  
displayed based on the number of digits you selected.  
Showafterwait to select how many seconds the phone  
should wait to display the word choice list.  
For more information about T9 Text Input, visit the Tegic Web  
site at www. T9. com.  
Entering Characters Using Alphabet Mode  
To enter characters using Alphabet mode, select the Alphabet  
mode (see “Selecting a Character Input Mode” on page 22).  
Press the corresponding key until the desired character appears.  
By default, the first letter of a word is capitalized and following  
letters are lowercased.  
24  
Charactersscrollinthefollowingorder:  
English Sequence  
Key  
Upper Case  
Lower Case  
. , @ 1 ? ! # /  
*
A B C 2  
a b c 2  
D E F 3  
G H I 4  
J K L 5  
M N O 6  
P Q R S 7  
T U V 8  
W XY Z 9  
0
d e f 3  
g h i 4  
j k l 5  
m n o 6  
p q r s 7  
t u v 8  
w x y z 9  
Space  
One-character-shifted Caps Lock Unshifted  
InFrenchmode, charactersscrollinthefollowingorder:  
French Sequence  
Key  
Upper Case  
Lower Case  
. , @ 1 ? ! # /  
*
A B C À Â Ç 2  
a b c à â ç 2  
D E F É È Ê Ë 3  
G H I Î Ï 4  
J K L 5  
d e f é è ê ë 3  
g h i î ï 4  
j k l 5  
M N O Ô 6  
P Q R S 7  
T U V Ù Û Ü 8  
W XY Z 9  
0
m n o ô 6  
p q r s 7  
t u v ù û ü 8  
w x y z 9  
Space  
One-character-shifted Caps Lock Unshifted  
See pages 22, 42 for changing French entry mode.  
After a character is entered, the cursor automatically advances to  
the next space after two seconds or when you enter a character  
not on the same key.  
Setting the Default Input Mode  
1. Select  
>Settings>Others>TextEntry>DefaultInput.  
2. Select an option and press  
.
T9 Word to select the T9 word mode for the initial entry  
mode.  
Alphabet to select the Alphabet mode for the initial entry  
mode.  
RetainMode to set the retain mode on to retain the  
previous entry mode.  
25  
2. Your Phone’s Settings  
Sound Settings  
Ringer Types  
SelectingRingerTypesforIncomingCalls  
Select a ringer type for incoming calls so that you can recognize  
when a certain type of call is coming in:  
Toselectaringertypeforincomingcalls:  
1. Select  
2. Select the field you want to edit (WithCallerID or NoCallerID)  
and press  
3. Select a ringer and press  
SelectingRingerTypesfor10-4Calls  
>Settings>Sounds>RingerType>IncomingCalls.  
.
.
1. Select  
>Settings>Sounds>RingerType>10-4.  
2. Select the field you want to edit (10-4Calls, 10-4Missed, or  
10-4FloorTone) and press  
.
3. Select a ringer and press  
.
SelectingRingerTypesforVoicemail, Messaging, orCalendar/Alarm  
1. Select >Settings>Sounds>RingerType.  
2. Select Voicemail, Messaging, or Calendar/Alarm.  
3. Select a ringer type (SingleTones, RingTones, Melodies, or  
VoiceRinger/VoiceAlarm) or MyContent, and press  
.
26  
Adjusting the Phone’s Volume Settings  
AdjustingtheRingerVolume  
1. Select  
>Settings>Sounds>Volume>Ringer.  
Done  
2. Select a volume level and press  
(left softkey).  
Tip: You can adjust the ringer volume in standby mode (or the earpiece  
volume during a call) by using  
.
You can make the ringer vibrate at any volume level by checking the  
box next to Always Vibrate.  
AdjustingtheAlertVolume  
This setting controls the alert volume for 10-4, Voicemail,  
Messaging, and Calendar/Alarm. You can set the alert volume  
separately from the ringer volume setting.  
1. Select  
>Settings>Sounds>Volume>AdvancedRing..  
2. Select 10-4, Voicemail, Messaging, orCal./Alarm.  
3. Using the navigation key, select SeparateVol.  
Done  
4. Select a volume level, and press  
(left softkey).  
AdjustingthePhone’sReceiverVolume  
1. Select  
>Settings>Sounds>Volume>Receiver.  
2. Select either Earpiece or Speaker.  
Done  
3. Select a volume level, and press  
(left softkey).  
AdjustingtheApplication, Start-up/Power-off, orKeyBeepVolume  
1. Select >Settings>Sounds>Volume.  
2. Select Application, StartUp/PwOff, or KeyBeep.  
Done  
3. Select a volume level, and press  
(left softkey).  
27  
Selecting Vibrate Type  
With this feature, you can select vibrate type for incoming calls,  
messages, and schedule alarms.  
1. Select  
>Settings>Sounds>VibrateType.  
2. Select IncomingCalls, 10-4 ,Voicemail, Messaging, or  
Calendar/Alarm.  
The following items require an additional step:  
IncomingCalls: select WithCallerID or NoCallerID.  
10-4: select 10-4Calls or 10-4Missed.  
3. Select a vibrate type and press  
.
Selecting a Tone Length  
1. Select  
>Settings>Sounds>Others>ToneLength.  
2. Select Short or Long.  
Setting a Start-up/Power-off Tone  
1. Select  
>Settings>Sounds>Others.  
2. Select Start-upTone or Power-offTone.  
3. Select a tone, and press  
.
Using Voice Prompt  
This feature allows you to hear voice prompts when using Voice-  
Activated Dialing, Voice Memo, Screen Call setting, etc. (Default  
Setting is Off.)  
1. Select  
>Settings>Sounds>Others>VoicePrompt.  
2. Select On.  
Tip: When ringer volume is set to Silence All or Vibrate All, voice  
prompts cannot be heard.  
28  
Setting Up Key Press Echo  
With this feature, you can hear a voice say the numbers when  
you press the keypad. This feature is available when you are in  
standby mode.  
1. Select  
>Settings>Sounds>Others>KeyPressEcho.  
2. Select On or Off.  
Note: If the Key Beep is off, you are not able to change this setting. See  
“Adjusting the Application, Start-up/Power-off, or Key Beep Volume” on  
page 27.  
Alert Notification  
Your phone comes with several different options to keep you  
aware of what’s going on by sounding the alert or ringer.  
Tosetthealerts:  
1. Select  
>Settings>Sounds>Alerts.  
2. Select an option and press  
.
Service to set alert on or off for network services  
parameter changes.  
10-4 to set an alert to notify you of 10-4 calls.  
10-4Calls to notify of incoming 10-4 calls.  
10-4Missed to notify of missed 10-4 calls.  
HeadsetAlert to tell if you have the floor using a  
headset.  
FloorToneVol. to set the floor tone volume during a call.  
Voicemail to set an alert to notify you of voice message(s).  
Select RingerLength to set the ringer length of Voicemail  
notification.  
Messaging to set an alert to notify you of text, picture  
message or Web Alert. Select RingerLength to set the  
ringer length of Messaging notification.  
MinuteBeep to set a minute reminder that beeps ten  
seconds before the end of each minute during a call.  
SignalFade to set alert to notify you when your phone  
loses a signal during a call.  
29  
3. Select a setting and press  
.
Tip: You can select Once or Repeat Alert if you select 10-4 Calls, 10-4  
Missed, Voicemail or Messaging. Repeat Alert sounds an alert every two  
minutes for twenty minutes. (For 10-4 calls, an alert sounds continuously.)  
Silence All  
Press  
down repeatedly in standby mode. (The screen  
will display “Silence All.”)  
To deactivate, press  
up repeatedly to select a  
volume level.  
Tip: When Ringer Volume is set as Silence All, you are not able to  
change the settings of Advanced Ring., Application,  
StartUp/PwOff or Key Beep. See “Adjusting the Application, Start-  
up/Power-off, or Key Beep Volume” on page 27.  
You can also select Vibrate All to set your phone to vibrate only.  
30  
Display Settings  
Changing the Phone’s Menu Style  
Your phone allows you to choose how the main menu appears  
on your display screen.  
Options  
(right softkey)>ChangeView.  
1. Select  
>
2. Select GridView or ListView.  
GridView to view each main menu item as an animated  
single-screen icon. You can select a menu by pressing a  
number key. Allocation of menu options corresponds to  
that of number keys on the keypad.  
ListView to view main menu as a list. Menu option is  
numbered and you can select it by pressing the  
corresponding number key on the key pad.  
You can also change the phone’s menu style through the settings  
menu.  
1. Select  
>Settings>Display>MainMenu.  
2. Select GridView or ListView.  
Changing the Backlight Time Length  
Tochangethebacklightsetting:  
1. Select  
>Settings>Display>Backlight>MainLCD.  
2. Select AlwaysOn, DimOnly, or a preset length of time.  
Tochangethekeypadbacklightsetting:  
1. Select  
>Settings>Display>Backlight>Key.  
2. Select AlwaysOff or a preset length of time.  
Note: Long backlight settings affect the phone’s talk and standby times.  
31  
Power Save Mode  
This feature helps conserve your battery power by setting the  
Main LCD backlight to “Dim Only,the keypad backlight to  
"Always Off" and the Main LCD sleep mode to “after 5 sec.”.  
1. Select  
>Settings>Display>PWRsaveMode.  
(left softkey) to continue.  
2. A message appears. Press  
OK  
3. Select On. (Select Off to deactivate this feature.)  
Changing the Greeting  
Todisplayorchangeyourcustomgreeting:  
1. Select  
>Settings>Display>Greeting>Custom.  
2. Enter a custom greeting using your keypad and press  
.
(See “Entering Text” on page 22.)  
Toselectthedefaultgreeting:  
Select  
>Settings>Display>Greeting>Default.  
Changing the Font Size  
1. Select  
>Settings>Display>FontSize.  
2. Select View or Input.  
Viewto select Messaging or Browser.  
Input to select Phone#s, Messaging or Others.  
3. Select a font size and press  
.
Preview  
Tip: You can see the preview of the display by pressing  
(right  
softkey). (For View menu only.)  
From the preview display, you can select a font size by pressing the  
navigation key right or left and press  
.
Changing the Background  
1. Select  
2. Select an option (Midnight, Cardinal, or HighContrast) and  
press  
>Settings>Display>Background.  
.
32  
Changing the Contrast  
You can adjust your screen's contrast (brightness) to suit your  
surroundings.  
Toadjustthedisplay’scontrast:  
1. Select  
2. Select an option (Highest, High, Medium, Low, or Lowest) and  
press  
>Settings>Display>Contrast.  
.
Changing the Display Screen Animation  
Your new phone offers animation for what you see on the  
display screen during various phone functions.  
1. Select  
>Settings>Display>Animation.  
2. Select Standby, OutgoingCalls, or ServiceSearch.  
(If you select Standby, then select Set.)  
3. Select an option (Preset, MyContent, -GetNew, or Off) and  
press  
.
For Standby, you can select Time to set the animation  
starting time.  
4. Select an animation display and press  
.
Changing the Display for Incoming Calls  
1. Select  
2. Select an option (Preset, MyContent, -GetNew, or Off) and  
press  
>Settings>Display>IncomingCalls.  
.
3. Select a color or an image and press  
twice.  
Changing the Screen Saver  
Your new phone offers you the option of displaying a screen  
saver on the Main LCD while in standby mode.  
Tochangethescreensaver:  
1. Select  
2. Select an option (Preset, MyContent, -GetNew, or Off) and  
press  
3. Select a screen saver and press  
>Settings>Display>ScreenSaver.  
.
twice.  
33  
Changing the Clock/Calendar Display for Standby Mode  
Select from among a variety of items to be displayed in standby  
mode.  
Tosettheclock/calendardisplayforstandbymode:  
1. Select  
>Settings>Display>Clock/Calendar.  
2. Select a display option and press  
twice.  
Setting Return to Standby Mode  
1. Select  
>Settings>Display>ReturntoIdle.  
2. A message appears. Press  
(left softkey) to continue.  
OK  
3. Select Automatically or EndKey.  
Automatically to return to standby mode automatically  
when no key is pressed in 30 seconds.  
EndKey to return to standby mode by pressing  
.
Note: End Key setting affects the phone’s talk and standby times.  
Sleep Mode  
This feature helps conserve your battery power by restricting  
the display.  
1. Select  
>Settings>Display>SleepMode.  
2. Select an option and press  
.
To deactivate this feature, select Off.  
Note: This feature doesn’t work during a 10-4 call or while the  
speakerphone mode is activated.  
34  
Location Settings  
Location Services  
This cell phone is Assisted GPS Ready for services such as:  
Finder Services  
TM  
Seek & Find  
Business Tracking Services  
e9-1-1  
This cell phone is not intended to operate as a GPS satellite  
receiver. e9-1-1 services that use Assisted GPS are not currently  
available. While these services are not available today, this cell  
phone has the technology required to support such services  
upon their launch.  
Your Privacy  
Subscriber personal location information is subject to strong  
privacy protection, including physical, electronic and  
procedural safeguards. Bell Mobility will first obtain the express  
consent of subscribers before using or disclosing location  
information. At all times, Bell Mobility customers will be in full  
control of their location information through the location menu  
option in this cell phone and a secure on-line privacy profile that  
is available through Bell Mobility eCare at www.bell.ca. Except for  
basic telephone and 911 service, Bell Mobility will only use your  
location information with your consent. For more information  
about our Finder Services privacy policy, please visit  
www.bell.ca/finderservices.  
35  
Settings  
The settings allow you to turn the Assisted GPS chipset in the  
cell phone to “Allow” or “Deny.Setting location to On lets the  
network detect the cell phone’s geographic location using  
Assisted GPS, making some features easier to use. Setting  
location to Off disables Assisted GPS, but some features may still  
detect the cell phone’s whereabouts using cell tower  
technology. Assisted GPS is automatically set to On when an  
emergency call is placed, then set back to Off when the call is  
completed.  
TosettheLocationMenutoALLOWorDENY:  
1. Select  
>Settings>Location.  
2. Read the disclaimer and press  
(left softkey).  
OK  
3. Select On or Off.  
Tip: When the Location feature is on, your phone’s standby screen will  
display the  
displayed.  
icon. When Location is turned off, the  
icon will be  
36  
Messaging Settings  
Setting Message Notification Display  
You can set your phone to display an icon and message  
notification or just display an icon notification when you receive  
a text message, picture message, voicemail, or Web Alert.  
1. Select  
>Settings>Messaging>Notification.  
2. Select MsgsandIcon or IconOnly.  
Tip: To access Messaging settings menu, you can also select  
Messaging > Settings.  
>
Note: Receiving a message may interrupt certain operations that you  
may be engaged in (e.g. adjusting volume while receiving a message).  
If you would like to avoid these interruptions, select Icon Only during  
step 2 above.  
Setting Push Options  
Turning this feature on allows you to connect to a Web Alerts  
page automatically (if possible) when you receive a Web Alert.  
See page 98 for Web Alerts.  
1. Select  
>Settings>Messaging>PushOptions.  
2. Select Yes or No.  
Editing Canned Messages  
Your phone can store canned messages for use with text  
messaging. You can edit your phone’s default canned messages  
through the Settings menu.  
Toeditacannedmessage:  
1. Select  
>Settings>Messaging>CannedMsgs.(The list of  
canned messages is displayed.)  
Options  
2. Select the message you want to edit and press  
(right  
softkey) >Edit.  
3. Use your keypad to edit the message and press  
to save your  
changes.  
Options  
Note: To reset all messages, press  
(right softkey) >  
Reset All Msgs > Yes after step 1 above.  
37  
Toeraseacannedmessage:  
1. Select  
>Settings>Messaging>CannedMsgs.  
Options  
2. Select the message you want to erase and select  
(right  
softkey).  
3. Select Erase > Yes.  
Tochangethelanguageofthecannedmessages:  
1. Select  
>Settings>Messaging>CannedMsgs.  
Options  
2. Press  
(right softkey)>SelectLang..  
3. Select English or French.  
Note: For information on editing text, see “Entering Text” on page 22.  
Setting Your Callback Number  
With this feature, you can send a callback number with your text  
message.  
1. Select  
>Settings>Messaging>Text>SendCallback#.  
2. Select an option and press  
.
None to send no callback number.  
MyPhone# to send your phone number.  
Other to send a defined number. To set a number, enter a  
phone number and press  
.
38  
Setting Your Signature  
This feature allows you to send a text message with your  
signature.  
1. Select  
>Settings>Messaging>Text>Signature.  
2. Press , and then select On.  
3. Select Text and enter your signature.  
Save  
4. Press  
(left softkey) >  
(left softkey).  
OK  
Note: You can insert your signature even when your signature setting is  
Mode  
off. Press  
your message.  
(right softkey) and select Signature while composing  
Setting Drafts Alert  
Drafts Alert sends you a reminder when you have unsent  
messages waiting in the drafts folder.  
1. Select  
>Settings>Messaging>Text>DraftsAlert.  
2. Select On or Off.  
Airplane Mode  
When your phone is in Airplane mode, it cannot send or receive  
any calls (except for 911 dialing) or access online information.  
Youmaystillusethephone’sotherfeatures, suchasvoicememo,  
calculator, calendar, etc., while you are in Airplane mode.  
1. Select  
>Settings>Others>AirplaneMode.  
2. Read the disclaimer and press  
.
3. Select On or Off.  
Note: While in Airplane mode, your phone’s screen will display “Phone  
Off.”  
39  
TTY Use  
A TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are deaf or  
hard of hearing, or who have speech or language disabilities, to  
communicate via a telephone.  
Your phone is compatible with select TTY devices. Please check  
with the manufacturer of your TTY device to ensure that it  
supports digital wireless transmission. Your phone and TTY  
device will connect via a special cable that plugs into your  
phone’s headset jack. If this cable was not provided with your  
TTY device, contact your TTY device manufacturer to purchase  
the connector cable.  
1. Select  
>Settings>Others>TTY. (An informational message  
will be displayed.)  
2. Press or (left softkey) to continue.  
OK  
3. Select Enable or Disable.  
Note: When you connect TTY devices, your phone will display in  
TTY mode.  
If TTY mode is enabled, the audio quality of non-TTY devices  
connected to the headset jack may be impaired.  
IMPORTANT NOTICE: 911 Emergency Calling  
It is recommended that TTY users make emergency calls by other means  
including cellular and landline communications.  
40  
Phone Setup Options  
My Favourites  
Your phone offers you the option of assigning a shortcut to a  
favourite or often-used function. Pressing the navigation key left  
(by default) will launch your user-defined shortcut.  
Toassignyourshortcut:  
1. Press the navigation key left.  
2. Select <AddFavourite>.  
3. Select an option and press  
.
Contact to display stored Contacts entries.  
MyContent to display downloaded items stored in your  
phone.  
WebBookmark to display your bookmarked sites.  
MenuItem to assign an often-used menu item.  
4. Using the navigation key or your keypad, select an item to be  
assigned to the My Favourites list.  
5. Press  
(left softkey) to save if you select options other  
Assign  
than Contact.  
Toedittheshortcut:  
1. Press the navigation key left.  
2. Highlight your desired menu and press  
(right softkey).  
Options  
3. Select an option and press  
.
Replace to replace an existing shortcut.  
Remove to remove an existing shortcut.  
RemoveAll to remove all the existing shortcuts.  
Help to display the My Favourites list information.  
41  
Setting the Text Entry Options  
1. Select  
>Settings>Others>TextEntry.  
2. Select an option and press  
.
Auto-Capital to set the auto-capital on or off.  
MyWords to add a word to or edit a word in the T9  
database (see page 23).  
InptLanguage to select the language (English or French).  
DefaultInput to select T9word, Alphabet, or RetainMode for  
the initial entry mode. Set RetainMode to retain the  
previous entry mode (see page 25).  
Auto-Space to set the auto-space on or off after T9 words  
you enter.  
T9Settings to customize the T9 settings (see page 24).  
AddWord to store words that you use frequently  
(see page 23).  
Help to see the T9 instructions page.  
Setting Any Key Answer  
This feature allows you to answer incoming calls by pressing any  
key (except  
,
, softkeys, and sidekeys).  
1. Select  
>Settings>Others>AnyKeyAnswer.  
2. Select On or Off.  
Auto Answer Mode  
This feature sets the phone to automatically pick up incoming  
calls in speakerphone mode or hands-free mode (when  
connected).  
1. Select  
>Settings>Others>AutoAnswer.  
2. Select Hands-free or Speakerphone.  
3. Select 5Seconds, 10Seconds, or Off.  
42  
Setting Abbreviated Dialing  
ToactivateContactsMatchfeature:  
1. Select  
>Settings>Others>Abbrev. Dial.  
2. Select ContactsMatch>Enable.  
To deactivate this feature, select Disable.  
Tosetyourprependnumber:  
1. Follow step 1 above.  
2. Select Prepend>Enable.  
To deactivate this feature, select Disable.  
3. Enter the first five- or six- digit prefix in the Prepend# field,  
(for example, an area code and prefix) and press  
(left  
OK  
softkey).  
Tip: To make an Abbreviated Dial call, see “Using Abbreviated Dialing”  
on page 21.  
Note: This setting does not apply to 911 or Directory Assistance.  
43  
Headset Mode  
This feature allows you hands-free phone use. Check the Turbo  
Button (the operation button) on the headset to activate or  
deactivate.  
Toconnecttheheadset:  
Simply plug the headset into your phone’s headset jack.  
TosetTurboButtonoftheheadsetmode:  
1. Select  
>Settings>Others>HeadsetMode.  
2. Select an option and press  
:
VoiceCalls to use the Turbo Button to activate voice dial.  
Press twice to redial the last call. Press and hold to record  
a voice memo.  
10-4 to use the Turbo Button to redial the last 10-4 call.  
Press and hold the Turbo Button.  
Off to disable a Turbo Button setting or if your headset  
does not have a Turbo Button.  
Setting Navigation Key Shortcuts  
You can use the navigation keys as shortcuts to access specific  
menu items directly from standby mode. With this feature, you  
can reassign the default shortcuts to the menu items you choose.  
Tosetthenavigationkeyshortcut:  
1. Select  
>Settings>Others>NavigationKeys.  
2. Select the navigation key you wish to reassign and press  
.
3. Using the navigation key or your keypad, select a function.  
4. Press  
(left softkey) to save.  
Assign  
44  
Setting the Current Time  
1. Select  
>Settings>Others>SetTime/Date.  
2. Set the current time and date and press  
.
Changing the Menu Language  
1. Select  
>Settings>Others>Language.  
2. Select English or Français.  
Setting Key Guard  
This feature enables you to lock the keys in order to prevent  
accidental key presses.  
Tip: You can dial only Emergency numbers.  
ToactivateKeyGuard:  
Press  
>KeyGuard.  
TodeactivateKeyGuard:  
Press and hold  
.
Tip: From standby mode, you can also activate the Key Guard by  
pressing and holding  
.
AutoKeyGuard  
This feature allows you to activate Key Guard automatically  
when no key is pressed in approx. 15 seconds.  
Select  
>Settings>Others>AutoKeyGuard>On.  
45  
3. Security  
Accessing the Security Menu  
You must enter your lock code to view the Security menu.  
1. Select  
>Settings>Security.  
2. Enter your lock code.  
Tip: If you never changed the lock code number and you can’t recall your  
lock code, try using the last four digits of your phone number.  
Using Your Phone’s Lock Feature  
Locking Your Phone  
LockPhone automatically locks the keys. If you select LockPhone,  
you must enter the lock code beforehand to make a call. In this  
way you can prevent other people from using your phone.  
1. From the Security Menu display (See “Accessing the Security  
Menu” above), select LockPhone.  
2. Select LockNow or OnPower-up.  
LockNowto lock your phone now.  
OnPower-upto lock your phone the next time it is  
turned on.  
3. Select either FullLock or Exc. Incom.Calls.  
FullLock to restrict both outgoing and incoming calls.  
Exc. Incom.Calls to restrict outgoing calls while allowing  
incoming calls.  
46  
Unlocking Your Phone  
1. From standby mode, press  
2. Enter your lock code.  
(left softkey).  
Unlock  
Changing the Lock Code  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Others>ChangeLock.  
2. Enter and re-enter a new lock code.  
Calling in Lock Mode  
Even when your phone is locked, you can make calls to 911,  
Customer Service, and to special numbers without entering the  
lock code. (For information on special numbers, see “Using  
Special Numbers” on page 48.)  
Lock Services  
With this feature, you can choose to restrict access to the  
Internet, incoming and outgoing voice calls, 10-4 calls settings.  
1. From the Security Menu display, select Others > LockServices.  
2. Select VoiceCalls, Internet,or 10-4.  
3. Select Locked.  
To deactivate this feature, select Unlocked.  
Note: If Voice Calls is locked, making and receiving calls are not  
available. (You can only make a call to 911.)  
47  
Restricting Calls  
You can restrict phone numbers your phone dials or receives.  
(This setting does not apply to 911 or Customer Service.)  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Others>LimitUse.  
2. Select OutgoingCalls or IncomingCalls.  
3. Select an option and press  
.
AllowAll to make or receive all calls.  
ContactsOnly to make or receive calls to or from Contacts  
entries, voicemail, or special numbers only.  
Special#sOnly to make or receive calls to or from three  
special numbers only. (You must register the numbers  
beforehand. See “Using Special Numbers” below.)  
Note: Restricted incoming calls are forwarded to voicemail.  
Using Special Numbers  
You can save three special numbers on your phone. You can  
make or receive calls to or from special numbers even when  
your phone is in LockPhone status.  
Toaddoreditaspecialnumber:  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Others>Special#s.  
2. Select a field to enter or edit the number and press  
3. Enter or edit the number and press  
.
.
Note: There are no speed dial options associated with special numbers.  
You cannot make calls to or receive calls from special numbers if  
Voice Calls is set to Locked in Lock Services.  
48  
Erasing Phone Content  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Erase/Reset.  
2. Select an option and press  
.
EraseContacts to erase all of your Contacts entries.  
EraseContent to erase all items you have downloaded to  
your phone.  
EraseV. Memo to erase all voice/call memos you have  
recorded.  
EraseMsgs to erase all text messages (including locked  
ones) in the Inbox, Sent Mail, Pending, Drafts folders,  
and your defined folders; all Recent Lists; and all user-  
created canned messages.  
3. Press  
(left softkey) to continue.  
OK  
4. If you are certain you would like to erase, select Yes.  
Resetting the Browser  
This option resets your Web browser’s history, bookmarks,  
cookies, auto-complete text, and URLs.  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Erase/Reset>ResetBrowser.  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset, select Yes.  
49  
Resetting Favourites  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Erase/Reset>ResetFavourt..  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset, select Yes.  
Restoring Default Settings  
DefaultSettings restores all the factory defaults, including the  
ringer types and display settings. The Contacts, Call History,  
Calendar, and Messaging are not affected.  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Erase/Reset>DefaultSetting.  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to restore all the factory  
settings, select Yes.  
Resetting Your Phone  
Resetting the phone resets all settings and erases all data on your  
phone.  
1. From the Security Menu display (See “Accessing the Security  
Menu” on page 46), select Erase/Reset>ResetPhone.  
(A disclaimer is displayed.)  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset your phone, select  
Yes.  
50  
Using the Parental Control Feature  
This feature allows you to restrict outgoing and incoming calls,  
access to services such as Internet and 10-4, as well as use the  
Edit Contacts function. Most menu options for the Limit Use,  
Change Lock, and Lock Services menus in Parental Control are  
the same as the options for the Security menu.  
Torestrictoutgoingandincomingcalls:  
1. Select  
>Tools>ParentalCtrl.  
2. Enter your lock code to display the Parental Control menu.  
3. Select LimitUse>OutgoingCalls or IncomingCalls.  
4. Select AllowAll, ContactsOnly, or Special#sOnly.  
Tolockservices:  
1. Select  
>Tools>ParentalCtrl.  
2. Enter your lock code to display the Parental Control menu.  
3. Select LockServices>Internet or 10-4.  
4. Select Locked. (Select Unlocked to disable this feature.)  
Tochangeyourlockcode:  
1. Select  
>Tools>ParentalCtrl.  
2. Enter your lock code to display the Parental Control menu.  
3. Select ChangeLock.  
4. Enter and re-enter your new lock code.  
51  
Toaddorreplaceaspecialnumber:  
1. Select >Tools>ParentalCtrl.  
2. Enter your lock code to display the Parental Control menu.  
3. Select Special#s.  
4. Select a field for your entry and press  
.
5. Enter the number and press  
.
ToeditContacts:  
You can also edit Contacts from the Parental Control menu while  
any Limit Use feature (except Allow All) is enabled. You are  
required to enter your lock code once to access the Parental  
Control menu. However, as long as you have not gone back to  
the main menu or standby mode, you are not required to enter  
your lock code each time you edit your Contacts.  
1. Select  
>Tools>ParentalCtrl.  
2. Enter your lock code to display the Parental Control menu.  
3. Select EditContacts.  
Note: Regardless of whether you set Lock Services, Change Lock, or  
Limit Use from the Security menu or from the Parental Control menu, the  
most recent setting takes precedence.  
Tip: The lock code for both the Security and Parental Control settings is  
the same.  
52  
4. Roaming  
Understanding Roaming  
Recognizing Icons on the Display Screen  
Your phone’s display screen always lets you know when you’re  
off the home network. Any time you are roaming, the phone  
displays the roaming icon (  
).  
Roaming on Other Networks  
When you’re roaming, your call quality and security will be  
similar to the quality you receive when making calls on the  
home network. You may not be able to access certain features.  
Note: If you’re on a call when you leave the home network and enter an  
area where roaming is available, your call is dropped. If your call is  
dropped in an area where you think service is available, turn your phone  
off and on again to reconnect to the home network.  
Setting Your Phone’s Roam Mode  
Your phone allows you to control your ability to roam. By using  
the Roaming menu option, you can determine which signals your  
phone accepts.  
Tochoosefromtwodifferentsettingsonyourdualband/dual  
modephonetocontrolyourroamingexperience:  
1. Select  
>Settings>Roaming.  
2. Select an option and press  
.
Automatic to seek Service. When service is unavailable,  
the phone searches for an alternate system.  
HomeOnly to access the home network only and prevents  
roaming on other networks.  
53  
5. Menu Navigation  
Viewing the Menus  
Menu Diagram  
Menus let you check or change your phone settings. The  
following outline shows your phone’s menu structure.  
1. Missed Alerts  
6. Web  
7. Tools  
1. Voice Services  
2. Call History  
1. Outgoing  
2. Bluetooth  
3. Calendar  
4. Alarm Clock  
5. Calculator  
6. Stopwatch  
7. World Clock  
8. Parental Ctrl  
8. Settings  
1. Sounds  
2. Incoming  
3. Missed  
4. Recent Calls  
5. Erase History  
3. Contacts  
1. Find/Add Entry  
2. Group  
3. Speed Dial #s  
4. My Name Card  
5. Services  
4. Messaging  
1. Send Text  
2. Text  
3. Pic. Msg  
4. Web Alerts  
5. Voicemail  
6. Settings  
5. My Content  
Games  
2. Display  
3. Internet  
4. 10-4  
5. Location  
6. Bluetooth  
7. Roaming  
8. Messaging  
9. Security  
0. Others  
* Phone Info  
9. Key Guard  
Ringers  
ScreenSavers  
Applications  
Dynamic 1-11 (If applicable)  
Others (If applicable)  
54  
IN USE MENU  
Press  
(right softkey) to display the following options:  
Options  
1. Flash  
2. Mute/Unmute  
3. Speaker On/Speaker Off  
4. Three-Way Call  
5. Missed Alerts  
6. Call History  
7. Contacts  
8. Messaging  
9. Tools  
10. Settings  
55  
6. Managing Call History  
Viewing History  
You’ll find the Call History feature very helpful. It is a list of the  
phone numbers (or Contacts entries) for calls you placed,  
accepted, or missed. Call History makes redialing a number fast  
and easy. It is continually updated as new numbers are added to  
the top of the list and the oldest entries are removed from the  
bottom of the list.  
1. Select  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Select the entry you wish to view and press  
>CallHistory.  
.
Note: Call History records only calls that occur while the phone is turned  
on. If a call is received while your phone is turned off, it will not be  
included in the phone’s Incoming or Missed call logs.  
Tip: The icons next to the name in the Recent Calls list represent the  
status of the call history:  
for outgoing calls,  
for Incoming calls, and  
for Missed calls.  
You can also view the next or previous Call History entry by pressing  
the navigation key right or left.  
Call History Options  
Highlight a Call History entry and press  
(right softkey).  
Options  
Call to dial the phone number.  
Call:SpeakerOn to dial the phone number in speakerphone  
mode.  
SendText to send a text message. See page 98 for details.  
SavePhone# to save the phone number (if applicable).  
ShowContact appears when the caller’s phone number is  
already saved in your Contacts. (See “Saving a Phone  
Number From Call History” on the page 57.)  
Prepend to add numbers to the beginning of the phone  
number. (See “Prepending a Phone Number From Call  
History” on page 58.)  
56  
CopytoPrsnl to copy the phone number to the 10-4 Personal  
List (appears only when 10-4 mode is set to Enable and the  
number does not match any stored entry in your Personal  
List).  
Erase to erase the entry.  
Making a Call from Call History  
ToplaceacallfromCallHistory:  
1. Select  
>CallHistory.  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Highlight the Call History entry you want to call.  
4. Press  
– or –  
or  
.
Press  
(right softkey), > Call or Call:SpeakerOn.  
Options  
Note: You cannot make calls from Call History to entries identified as No  
Caller ID, restricted ID (Private), or Unavailable ID.  
Saving a Phone Number from Call History  
1. Select  
>CallHistory.  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Highlight the Call History entry you want to save and press  
(right softkey) >SavePhone#.  
Options  
4. Select NewName or FromContacts to enter a name.  
NewName to create a new Contacts entry for the  
number.  
FromContacts to save the number to an existing entry.  
(This step is not necessary on the very first entry in your  
Contacts.)  
5. Select a label and press  
.
6. Enter a name for the new entry using the keypad and press  
.
– or –  
Search for an existing contact name and press  
new number.  
to save the  
7. Press  
(left softkey).  
Save  
Note: You cannot save phone numbers from calls identified as No Caller  
ID, restricted ID (Private), or Unavailable ID.  
57  
Prepending a Phone Number from Call History  
If you need to make a call from Call History and you happen to  
be outside your local area code, you can add the appropriate  
prepending by following these steps:  
1. Highlight your desired Call History entry and press  
Options  
(right softkey).  
2. Select Prepend.  
3. Enter the digits you want to add to the number.  
4. Press  
or  
to place a call.  
Erasing Call History  
1. Select  
>CallHistory>EraseHistory.  
2. Select Outgoing, Incoming, Missed, RecentCalls, or All.  
3. Select Yes.  
– or –  
Select No to return to the previous menu.  
58  
7. Using Contacts  
Displaying the Contacts List  
Select  
>Contacts>Find/AddEntry.  
Adding a New Contacts Entry  
Your phone can store up to 200 Contacts entries. Contacts can  
store up to a total of 500 phone numbers and each entry’s name  
can contain 32 characters.  
1. From the Contacts list display, select <AddContact>.  
2. Enter a name for the entry and press the navigation key down.  
Shortcut: Enter the phone number in standby mode and press  
Proceed with steps 2-5 in “Saving a Phone Number” on page 18.  
.
3. Enter the phone number and press  
4. Select a label for the entry (Mobile, Home, Work, Pager, Fax, or  
Other) and press  
5. Press (left softkey).  
.
.
Save  
Assigning a Group Entry  
Toaddagroupname:  
1. Select  
>Contacts>Group.  
2. Highlight an unnamed group and press  
(right softkey)  
Options  
> Edit.  
3. Enter the group name and press  
.
4. Scroll down to the Ringer or PictureID to assign a ringer type  
or image for a group entry.  
5. Press  
(left softkey) to save.  
Save  
59  
ToassignaContactsentrytoagroup:  
1. From the Contacts list display, select your desired Contacts  
entry and press  
.
2. Scroll down to the box next to the  
icon and press  
twice.  
(left  
3. Select a group from the Group list and press  
or  
Done  
softkey).  
4. Press  
(left softkey) to save.  
Save  
Toeraseagroupmember:  
1. Select >Contacts>Group.  
2. Select the group entry you want to erase members from and  
press  
.
3. Select the member you want to erase and press  
(right  
Options  
softkey) >Erase.  
4. Select This.  
Tip: This option may not be displayed if you save only one member in a  
group.  
To erase all members, select All.  
5. Select Yes.  
Finding Contacts Entries  
There are several ways to display your Contacts entries:  
by name, by speed dial number, and by group. Follow the steps  
outlined in the sections below to display entries from the  
Contacts menu.  
Finding Names  
TofindContactsentriesbyname:  
1. From the Contacts list display, scroll through all the entries  
using your navigation key.  
– or –  
Enter the first letter of the person’s name. (The more letters  
you enter, the more your search narrows.)  
2. To display the entry’s details, select your desired entry and  
press  
.
3. To make the call, select a number and press  
or  
.
60  
TofindContactsentriesbyvoicedialtag:  
Note: To use this feature, you must have stored entries for voice dialing.  
See “Using Voice-Activated Dialing” on page 76.  
Finding Speed Dial Numbers  
Select  
>Contacts>SpeedDial#s.  
See “Using Speed Dialing” on page 20 for how to use speed  
dialing.  
Finding Group Entries  
Tofindentriesdesignatedaspartofagroup:  
1. Select  
>Contacts>Group.  
2. Scroll through the group entries using your navigation key. To  
display Contacts entries belonging to a group, select the  
group and press  
3. To make the call, highlight your desired number and press  
or  
.
.
61  
Contacts Entry Options  
To access a Contacts entry’s options, from the Contacts list  
display, select an entry and press . Then highlight a phone  
number and press  
(right softkey).  
Options  
Edit to edit the selected entry.  
Call to dial the selected phone number.  
Call:SpeakerOn to dial the selected phone number in  
speakerphone mode.  
SendText to send a text message. (See page 98 for details.)  
CallAlarm to set a call alarm to the entry (see page 69).  
SetSpeedDial to assign the speed dial numbers to the entry  
(see page 64).  
SetVoiceTag to set a voice dial tag for the entry (see page 76).  
Prepend to alter a phone number by adding numbers to the  
beginning of the entry. (See “Prepending a Phone Number  
From Call History” on page 58.)  
CopytoPrsnl to copy the phone number to your 10-4 Personal  
List (only appears when 10-4 mode is set to Enable and the  
number does not match any stored entry in your Personal  
List).  
SendContact to send the Contacts entry to another Bluetooth  
device.  
Tip: You can view the next or previous entry by pressing the navigation  
key right or left.  
Adding a Phone Number to a Contacts Entry  
1. From the Contacts list display, select the Contacts entry you  
wish to add a phone number to and press  
.
2. Press (right softkey) >Edit; or  
(right softkey) if a  
Edit  
Options  
URL or email address is selected.  
3. Select the box next to the  
icon and press  
.
.
4. Enter the number and press  
5. Select a label for the number and press  
6. Press (left softkey).  
.
Save  
62  
Editing a Contacts Entry’s Phone Number  
1. From the Contacts list display, select the Contacts entry you  
wish to edit the phone number to and press  
.
2. Highlight the number you wish to edit and press  
Options  
(right softkey) >Edit.  
3. Press  
again to edit the number.  
4. Press  
to clear one digit at a time, or press and hold  
to  
erase the entire number.  
5. Re-enter or edit the number and press  
.
6. Select a label for the number and press  
.
7. Press  
(left softkey).  
Save  
Erasing a Contacts Entry from the List  
1. From the Contacts list display, highlight the entry you wish to  
erase and press  
(right softkey).  
Options  
2. Select EraseContact>Yes.  
63  
Assigning Speed Dial Numbers  
With this feature you can dial Contacts Directory entries with one  
key press for locations 2-9. (For details on how to make calls  
using speed dial numbers, see “Using Speed Dialing” on  
page 20.)  
Toassignaspeeddialnumber:  
1. From the Contacts list display, select your desired entry and  
press  
2. Highlight the phone number you want to set as a speed dial  
number and press (right softkey) >SetSpeedDial.  
.
Options  
3. Select an available speed dial location and press  
.
– or –  
1. Select  
2. Select an available speed dial location and press  
3. Select an entry from the list and press  
4. Select the phone number you want to set as a speed dial  
number and press  
>Contacts>SpeedDial#s.  
.
.
.
Note: When you select the speed dial location with a phone number  
assigned, you’ll be asked whether you want to overwrite the assigned  
number. Select Yes to overwrite or No to cancel. To delete the previous  
speed dial assignment, select Reset.  
Editing a Contacts Entry  
1. From the Contacts list display, select the entry you wish to  
edit and press  
.
2. Press  
(right softkey) >Edit; or  
(right softkey) if a  
.
Options  
Edit  
URL or email address is selected.  
3. Select the field you want to edit and press  
4. Add or edit the information and press  
5. Press (left softkey).  
.
Save  
64  
Assigning an Image to a Contacts Entry  
You can assign an image to a Contacts entry. The image is  
displayed when the entry calls you.  
Toassignanimageforanentry:  
1. From the Contacts list display, select the entry for which you  
want to assign the image and press  
.
2. Press the navigation key up to highlight the icon and press  
twice.  
3. Select an image and press  
twice to assign the image to the  
entry.  
4. Press  
(left softkey).  
Save  
Selecting a Ringer Type for an Entry  
You can assign a ringer type to a Contacts entry so you can  
identify the caller by the ringer type.  
Toselectaringertypeforanentry:  
1. From the Contacts list display, select the entry for which you  
want to assign a ringer and press  
.
2. Press (right softkey) >Edit; or  
(right softkey) if a  
Edit  
Options  
URL or email address is selected.  
3. Scroll down to the box next to the  
icon and press  
.
4. Select your desired ringer type and press . (When you  
highlight a ringer type, a sample ringer will sound.)  
5. Press  
(left softkey).  
Save  
65  
Secret Contacts Entries  
You can hide an entry’s phone number(s) by making them  
secret, which requires your lock code to edit the entry. The  
entry name is still displayed, but the entry’s information  
replaced by “<Secret>”.  
1. From the Contacts list display, select the Contacts entry you  
want to tag as secret and press  
(right softkey).  
Options  
2. Select SetSecret.  
3. Enter the 4-digit lock code.  
4. Select On or Off.  
Tip: If you never changed the lock code number and you can’t recall  
your lock code, try using the last four digits of your phone number.  
Dialing Services  
Your Contacts is pre-programmed with contact numbers for  
various services.  
1. Select  
2. Select CustomerService or DirAssistance.  
3. Press or  
>Contacts>Services.  
.
66  
8. Personal Organizer  
Using Your Phone’s Calendar  
Use the Calendar to remind you of events or important calls you  
need to make. You can schedule up to 100 events, 15 Call Alarms  
and 20 To Do Items.  
Displaying Your Calendar  
Select  
>Tools>Calendar.  
Tip: The current day is framed by a rectangle.  
Note: To use the Calendar function in a no-service area, set the actual  
time and date after turning off and on your phone.  
Setting Holidays  
Set holidays to your calendar according to your needs.  
Tosetaholiday:  
1. From the calendar display, highlight the date you want to set  
as holiday.  
2. Press  
(right softkey) >Holiday.  
Options  
3. Select an option and press  
.
SetDateto set the holiday for the date.  
SetWeeklyto set holiday for the same day of the week,  
every week.  
Toresetoredittheaddedholidays:  
1. From the calendar display, highlight the day you have set as  
holiday.  
2. Press  
(right softkey) >Holiday.  
Options  
3. Select an option and press  
.
ResetDateto reset the date.  
ResetWeeklyto reset the same day of the week of every  
week.  
ResetAllto reset all added holidays.  
67  
Adding an Event to the Calendar  
1. From the Calendar display, highlight the day to which you  
want to add an event.  
2. Press  
(right softkey) >AddEvent>Schedule.  
Options  
3. Select the following items you want to edit and press  
.
Descriptionto enter a description for the event.  
Tip: While entering the description you can also press  
(right  
Mode  
softkey) to select a description from “From To Do”. (You need to store  
entries in the To Do List. See “Adding To Do Items” on page 70 for  
details.)  
Fromto schedule the start time.  
To to schedule the end time.  
Location to edit the location of your event.  
Alarm to select the ringer for the alarm.  
AlarmTime to edit the alarm time (number of hours or  
minutes before the event starts). Default alarm time is 10  
minutes.  
Repeat to set the event’s repeating status. Select Once,  
Daily, Weekly, Monthly, or Yearly.  
5. Press  
(left softkey) to save the event.  
Save  
Tip: Press the navigation key up or down to scroll by week through the  
calendar, and to scroll by month.  
The date you have scheduled events is indicated by “”.  
68  
Adding a Call Alarm to the Calendar  
1. From the Calendar display, highlight the day to which you  
want to add a call alarm and press  
(right softkey).  
Options  
2. Select AddEvent>CallAlarm.  
3. Enter the phone number directly or press  
(right  
Options  
softkey) for the following options:  
FromContacts to select the number from your Contacts.  
Voicemail to select the number for voicemail access.  
4. Select the following items you want to edit and press  
.
Time/Date to edit the start time/date.  
Alarm to select the ringer alarm.  
Repeat to set the call alarm’s repeating status. Select Once,  
Daily, Weekly, Monthly, or Yearly.  
5. Press  
(left softkey).  
Save  
Tip: You can also add a call alarm from the Contacts menu.  
(See “Contacts Entry Options” on page 62.)  
Torespondtoacallalarm:  
Press any key to stop the alarm. (The alarm will stop and then  
sound again after the selected snooze interval.)  
Press  
(right softkey) to dismiss the event.  
Dismiss  
Tip: To change the alert settings, from the calendar view, press  
Options  
(right softkey) > Settings to set the ringer length and snooze options.  
Tocallthephonenumberatthetimeofacallalarmnotification:  
Press  
Press  
or  
to dial the phone number (if applicable).  
to make a 10-4 call (if applicable).  
69  
Adding To Do Items  
Your phone can store and manage 20 To Do items.  
1. From the Calendar display, press  
(right softkey).  
Options  
2. Select ToDoList >  
(right softkey) > AddItem.  
Options  
3. Enter the description and press  
.
4. Select Priority to edit the To Do’s priority. You can select from  
Normal, Urgent, or Done.  
5. Press  
(left softkey).  
Save  
Adding a To Do List Item to the Schedule  
1. From the Calendar display, press  
(right softkey) >  
Options  
ToDoList.  
2. Highlight the item you want to add to the schedule and press  
(right softkey).  
Options  
3. Select AddtoSchedule.  
AddtoSchedule to copy the item from the To Do List and  
make it a scheduled event.  
4. Modify the description field (if desired), and set the other  
fields using your keypad and press . (See “Adding an Event  
to the Calendar” on page 68.)  
Tip: While entering the description you can also press  
(right  
Mode  
softkey) to select a description from “From To Do”. (You need to store  
entries in To Do List in advance.  
5. Press  
(left softkey).  
Save  
70  
Event Alerts  
There are several ways your phone alerts you to scheduled  
events.  
By playing the alert tone (depending on the ringer type and  
ringer volume setting).  
By blinking the LED.  
By lighting the LCD backlight (depending on the backlight  
setting).  
Press any key to stop the alert. (The alert will stop and then  
sound again after the selected snooze interval.)  
Press  
(right softkey) to dismiss the event.  
Dismiss  
Note: To change the alert settings, from the calendar view, press  
(right softkey) > Settings to set the ringer length and snooze  
Options  
options.  
Viewing Day’s Events  
1. From the Calendar display, select the day for which you would  
like to view events and press . (If you have events  
scheduled for the selected day, they will be listed in  
chronological order.)  
2. To display the details of an event listed in the schedule, select  
the event and press  
.
Event List Options  
While you are displaying the day’s events list, press  
(right softkey) to display the following options:  
Options  
Add Event to add a schedule to the calendar.  
Erase Event to erase the event.  
To Do List to display the To Do List on the calendar.  
Go to Date to jump to another date on the calendar.  
View Memory to view the memory status for events saved in  
the phone.  
Erase Memory to erase memory for events saved in the  
phone.  
71  
Erasing Events  
Toeraseaday’sscheduledevents:  
1. From the calendar display, select the day for which you would  
like to erase events and press  
.
2. Highlight one of the events and press  
(right softkey)  
Options  
>EraseEvent>Yes.  
Note: You can erase registered Call Alarms if you select a Call Alarm  
event in step 2 above.  
Toeraseoldscheduledevents:  
From the calendar display, press  
EraseMemory>EraseOld>Yes.  
(right softkey)>  
Options  
Options  
Toeraseallscheduledevents:  
1. From the calendar display, press  
(right softkey) >  
EraseMemory>EraseAll. (An alert will be displayed asking you  
to confirm the deletion.)  
2. Select Yes to erase all events.  
Note: All events are erased including Call Alarms (see page 69) and To  
Do List items (see page 70).  
Going to a Given Date  
1. From the Calendar display, press  
(right softkey) >  
Options  
GotoDate.  
2. Enter the date by using the navigation key and/or the keypad  
and press  
.
72  
Using Your Phone’s Tools  
Using the Alarm Clock  
Tosetthealarmclock:  
1. Select  
>Tools>AlarmClock.  
Note: To set the alarm clock in a no-service area, set the actual time and  
date after turning off and on your phone.  
2. Select a number and press  
.
3. Select the items you want to edit and press  
.
Description to enter a description of the alarm.  
Time to enter the alarm time. Enter the desired alarm time  
and press  
.
Repeat to select the alarm frequency.  
Alarm to set the alarm on or off.  
4. Press  
(left softkey) to save the alarm settings.  
Save  
Tip: Press the left softkey (On or Off) to toggle the alarm on and off.  
To change the alarm settings, select  
the ringer length and snooze options.  
(right softkey) to set  
Settings  
Note: The alarm will not sound when the phone is powered off.  
Tostopthealarm:  
Press any key to stop the alarm. (The alarm will stop and then  
sound again after the selected snooze interval.)  
Press  
(right softkey) to dismiss the alarm.  
Dismiss  
73  
Using the Stopwatch  
Tostartthestopwatch:  
Select  
>Tools>Stopwatch.  
Press  
(left softkey) to start the stopwatch.  
(left softkey) to stop the stopwatch.  
Start  
Press  
Press  
Stop  
(left softkey) to start the stopwatch again.  
Resume  
Torecordalaptimewhilethestopwatchisrunning:  
Press  
(right softkey) to record time of the first lap.  
Lap  
Press  
(right softkey) again to record the next lap.  
Lap  
(Up to 5 lap times can be saved. If you continue  
recording, lap times will be deleted from the oldest.)  
Todisplaythestopwatchoptions:  
1. From the stopwatch display, press  
(right softkey).  
Options  
2. Select an option and press  
.
GotoLapList to display a saved Lap List. Press  
(left  
Detail  
softkey) to display the lap list details.  
SavetoLapList to save the recorded lap times. (Available  
when you stop the lap in stopwatch operation.)  
Reset to reset the time to zero and clear any recorded lap  
times.  
Using the World Clock  
1. Select  
>Tools>WorldClock.  
2. Press the navigation key right or left to scroll through  
different time zones.  
Summer  
Standard  
(right softkey) for changing  
Tip: Press  
(left softkey) or  
between summer and standard time, if applicable. The  
while summer time is displayed.  
icon is shown  
74  
Using the Calculator  
1. Select  
>Tools>Calculator.  
2. Enter numbers using your keypad. Press the left softkey to  
insert a decimal point.  
3. Press the appropriate navigation key for an arithmetic option.  
(Up for addition, Down for subtraction, Left for multiplication,  
Right for division.)  
4. Enter numbers and press  
for the result.  
(right softkey).  
To clear the numbers, press  
CLR  
Personal Information Management  
Displaying Phone Information  
Select  
>Settings>PhoneInfo>MyPhone#.  
Finding Icon Definition  
1. Select  
>Settings>PhoneInfo> IconGlossary.  
2. Select the item for which you want to see the explanation and  
press  
.
Displaying the Version Information  
Select  
>Settings>PhoneInfo>Version.  
Displaying Advanced Information  
Select  
>Settings>PhoneInfo>Advanced.  
75  
9. Voice Services  
Using Voice-Activated Dialing  
You can use a voice dial tag to automatically dial a phone  
number in your Contacts. Your phone can store up to 30 voice  
dial tags.  
Note: Please set the Voice Prompt feature (see page 28) to On before  
using the Voice-Activated Dialing so that you can hear the voice  
instruction from the phone. The default setting is Off.  
Making a Call Using Voice-Activated Dialing  
Touseavoicedialtagtocallaphonenumber:  
1. Press and hold  
or  
.
2. Follow the voice prompts and recite the entry’s voice dial tag  
into your phone’s microphone.  
Note: To use this feature, you must have stored entries for voice dialing  
(see “Programming Voice Dial Tag to Your Phone” below).  
Programming Voice Dial Tag to Your Phone  
1. From the Contacts list display, select a Contacts entry to  
which you want to add a voice dial tag and press  
.
2. Press (right softkey) > SetVoiceTag.  
Options  
The phone will prompt you to say the name you want to  
program. Wait for the beep and then say the name.  
3. Respond to the prompt by repeating the name after the beep.  
(The display shows “Voice Tag Recorded”.)  
If you set a voice dial tag, the icon is shown next to the phone  
number on the Contacts list.  
Note: Record voice dial tags in a quiet environment and without the aid  
of an accessory.  
76  
Voice Dial Tag Options  
1. Select  
> Tools > Voice Services > Voice Tag.  
2. Select Review or Rev.:Speaker.  
3. Select the desired option and press  
(right soft key).  
Options  
Play to play the selected voice dial tag.  
SpeakerOn/SpeakerOff to play the tag in speakerphone  
mode.  
Erase to erase the selected voice dial tag. Select Yes to  
erase; select No to cancel.  
Erasing All Voice Dial Tags  
Toeraseallvoicedialtags:  
1. Select  
>Tools>VoiceServices>VoiceTag.  
2. Select EraseAll>Yes.  
77  
Managing Voice/Call Memos  
You can use your phone’s voice services to record brief memos  
to remind you of important events, phone numbers, or grocery  
list items.  
Tip: If 10-4 is set to Disable and the 10-4 service is locked, you can use  
Memo (left softkey) as a key to access Voice/Call Memo menu in standby  
mode. You can also use it to record memos.  
Recording Voice Memos  
Torecordavoicememo:  
1. Select  
>Tools>VoiceServices>VoiceMemo > Record.  
– or –  
Memo  
Press and hold  
(left softkey).  
2. Start recording after the beep.  
Toendtherecordingofyourmemo:  
Press  
,
, or  
.
Note: Your phone can store up to 12 voice memos (maximum of 18  
seconds per memo). The total recording time is 72 seconds.  
Recording Call Memos  
1. During a call, press  
(right softkey) >Tools>  
Options  
VoiceServices>VoiceMemo>Record or Rec.:Speaker  
2. Start recording after the beep.  
3. To finish recording, press  
or  
.
Recording also stops when the call is disconnected.  
Note: Only the other party’s voice is recorded during this process.  
78  
Reviewing Voice/Call Memos  
1. Select  
>Tools>VoiceServices>VoiceMemo > Playor  
Play:Speaker.  
– or –  
Press  
Memo  
(left softkey) >Play or Play:Speaker.  
2. Select a memo from the list and press  
.
Press  
(left softkey) or  
(right softkey) to change  
Fast  
Slow  
the playing speed.  
Tip: If you want to play all memos continuously, select All.  
3. Press  
to stop playing.  
Tip: To set the speakerphone mode on or off, press  
softkey) > Speaker On/Off during step 2 above.  
(right  
Options  
Erasing Voice/Call Memos  
Toeraseanindividualmemo:  
1. Select  
>Tools>VoiceServices>VoiceMemo > Play or  
Play:Speaker.  
– or –  
Press  
Memo  
(left softkey) >Play or Play:Speaker.  
2. Highlight the memo you want to erase and press  
Options  
(right softkey)>Erase>Yes.  
Toeraseallmemos:  
Select  
>Tools>VoiceServices>VoiceMemo>EraseAll>Yes  
to erase all voice memos saved in the phone.  
- or -  
Memo  
Press  
(left softkey)>EraseAll>Yes.  
79  
Setting Up Screen Call  
This feature enables you to screen incoming calls by using a  
recorded announcement, either one that is pre-recorded or one  
that you have recorded. You can also record the caller’s message  
into the Voice Memo list.  
Activating Screen Call  
TostartScreenCallwhenyouhaveincomingcalls:  
When the phone rings or vibrates, press  
(right  
Options  
softkey)>ScreenCall.  
TosetAutoScreenCall:  
1. Select  
>Tools>VoiceServices > ScreenCall>Auto>On.  
2. Set the answer delay by using numeric keys or by pressing the  
navigation key up or down.  
3. Press  
or  
(left softkey). The icon is displayed on the  
OK  
Standby display.  
Tip: While the caller’s message is being recorded, press  
to answer  
the call, or press to stop recording and disconnect the call.  
Selecting an Announcement for Screen Call  
1. Select  
>Tools>VoiceServices > ScreenCall>Announcement.  
2. Depending on your preference, select Pre-Recorded or Custom.  
Recording Name for a Pre-Recorded Announcement  
1. Select  
>Tools>VoiceServices > ScreenCall>Announcement.  
2. Highlight Pre-Recorded and press  
(right softkey) >  
Edit  
RecordName.  
If your name has already been recorded, select Yes or No  
for overwriting.  
3. Press  
time is 12 seconds.)  
4. Press to stop recording.  
to start the 1st recording. (The maximum recording  
5. After the 1st recording, press  
again to start the 2nd  
recording.  
6. Press  
to stop recording.  
80  
Recording a Customized Announcement  
1. Select  
>Tools>VoiceServices > ScreenCall>Announcement.  
2. Highlight Custom and press  
(right softkey) >Record.  
Edit  
If your announcement has already been recorded, select  
Yes or No for overwriting.  
3. Press  
to start the 1st recording. (The maximum recording  
time is 12 seconds.)  
4. Press  
to stop recording.  
5. After the 1st recording, press  
again to start the 2nd  
recording.  
6. Press  
to stop recording.  
Reviewing an Announcement  
1. Select  
> Tools>VoiceServices > ScreenCall>Announcement.  
2. Highlight Pre-Recorded or Custom and press  
(right  
Edit  
softkey) >Play or Play:Speaker.  
Erasing an Announcement  
1. Select  
> Tools>VoiceServices > ScreenCall>Announcement.  
2. Highlight Pre-Recorded or Custom and press  
(right  
Edit  
softkey).  
3. Select EraseName or Erase. (A confirmation will be displayed.)  
4. Select Yes.  
81  
10. 10-4  
10-4 allows you to enjoy quick, two-way, walkie-talkie-style”  
communication with your friends, family, and co-workers. You  
can make 1-to-1 or 1-to-many calls (up to 5 others on the same  
call) to any other 10-4 user, anywhere on the Network. You can  
make and receive 10-4 calls when your phone displays or  
.
Warning! Please be sure that enabling 10-4 affects the phone’s talk and  
standby times to a large degree.  
Starting 10-4  
Setting 10-4 Mode  
Select  
>Settings > 10-4>Enable/Disable>Enable or Disable.  
(The default setting is Disable.)  
Enable to make or receive 10-4 calls any time your phone  
is not in use.  
Disable to disable your phone’s 10-4 service; you will not  
be able to make or receive 10-4 calls or access your 10-4  
Contacts entries.  
10-4 Call Alerts  
There are several ways your phone alerts you during 10-4 calls.  
When you make or receive a 10-4 call:  
The phone beeps (depending on the Ringer Type).  
The backlight illuminates.  
The screen displays a 10-4 call message.  
The other party’s 10-4 number and name (if available) are  
displayed.  
The screen displays who has the floor.  
The status of a 10-4 call:  
The Green LED On indicates you have the floor and may speak.  
The Red LED On indicates another contact has the floor.  
The LED Off indicates the floor is open. (You can take the  
floor and speak by pressing and holding the 10-4 key on the  
left side of your phone  
.)  
82  
Making and Receiving a 10-4 Call  
Displaying the 10-4 List  
From standby mode, press  
(left softkey) or  
to access  
10-4  
the 10-4 List.  
Tip: The first time you access the list, the 10-4 Help message will appear.  
Press (left softkey) and (left softkey) to read a brief introduction  
Yes  
of 10-4.  
Next  
Selecting a Contacts List  
When your phone displays a 10-4 List, the left softkey is labeled  
Goto. To switch to another Contacts list, press  
(left  
Go to  
softkey) and select your desired list and press  
.
CompanyList/CompanyGrps. contain company-provided  
contacts (up to 200 entries). Your company list can only be  
created and modified by an authorized administrator on the 10-  
4 server. When the lists are empty, Company List/ Company  
Grps. will not appear on the display.  
PersonalList/PersonalGrps. contain your personal 10-4  
Contacts entry’s names and numbers, separately or in groups.  
You can create and edit your own personal list. Your phone  
can store a total of 200 entries (you may include up to five  
Contacts entries per group).  
10-4Outgoing shows the last 20 different 10-4 calls you placed.  
10-4Incoming shows the last 20 different 10-4 calls you  
accepted.  
10-4Missed shows the last 20 10-4 calls you missed.  
Note: The icon next to the group name indicates a group.  
83  
Making a 10-4 Call (1-to-1 Call)  
You can place a 1-to-1 10-4 call by selecting a Contacts entry  
from the 10-4 List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to place a call (CompanyList, PersonalList, 10-4Outgoing,  
10-4Incoming, or 10-4Missed) and press  
.
Tip: You can also select Enter 10-4# from Go to option to enter a 10-4  
number directly. See page 85 for details.  
3. Highlight the Contacts entry you want to call, and press and  
hold  
to place the call and get the floor. (You will see  
10-4calling... and Connecting... followed by “Youhavefloor.You  
can now begin speaking.)  
– or –  
Highlight the Contacts entry you want to call and press and  
release  
to place the call. (The call will connect as  
described above, but “Floorisopen.” will appear on the screen  
and either you or other party may press and hold  
the floor and speak.)  
to take  
Note: During a 10-4 call, the “floor” is the right to speak. When you see  
Floor is open.”, the first person to press can speak (while holding  
the key). Only the person who has the floor can speak. The phone beeps if  
you press when the other party has the floor.  
4. Continue holding  
speaking, release  
as you speak. When you finish  
to allow the other party to speak.  
(When the other party takes the floor, you will see the  
speaker’s name and phone number and the text “hasfloor.”)  
5. When you are finished, press  
.
Note: When neither party has the floor during a 10-4 call, “Floor is open.”  
appears on the display. If no one takes the floor for 20 seconds, the 10-4  
call ends automatically.  
Tip: If you press  
standard voice call.  
or  
during step 3 above, you can make a  
84  
Making a 10-4 Call (Group Call)  
You can make a 10-4 call to all members in a Group entry, which  
you have in your 10-4 List. You can communicate with up to five  
members at a time.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to make a Group call (CompanyGrps. or PersonalGrps.)  
and press  
.
3. Highlight the group entry you want to call, and press and hold  
to place the call and take the floor. (You will see  
10-4calling... and Connecting... followed by “Youhavefloor.”  
Continue with the 10-4 call as described previously.)  
To make a 10-4 call to a group member, select your  
desired group, highlight your desired group member, and  
press and hold  
.
If one of the group members takes the floor, you will see  
the member’s name and 10-4 number on the display.  
4. When the call is finished, press  
.
Tip: The phone beeps if you press  
when another party has the floor.  
You can also make a Group Call after checking the group member.  
Press to display group members, highlight <Call Group> and  
press and hold during step 3 above.  
To redial your last 10-4 call, highlight Redial and press  
10-4 List.  
from the  
Making a 10-4 Call by Entering a Number  
1. From standby mode, enter the 10-4 number you want to dial.  
2. Press to place the 10-4 call.  
3. Continue with the 10-4 call, pressing and holding  
to  
speak and releasing it to allow other parties to reply.  
4. When the call is finished, press  
.
– or –  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > Enter10-4#.  
Go to  
85  
3. Enter the 10-4 number you want to dial.  
4. Follow steps 2-4 of "Making a 10-4 Call by Entering a Number"  
on the previous page.  
Missed Call Notification for 10-4 Calls  
When an incoming 10-4 Call is not answered, the Missed Call  
Notification is displayed on your screen.  
Tocallthelastmissed10-4Call:  
Simply press and hold  
while the Missed Call Notification  
is displayed. (Continue with the 10-4 call as described  
previously.)  
Toerasethemissed10-4CallLog:  
Press  
(right softkey).  
Dismiss  
Todisplaythemissed10-4call:  
Press  
(left softkey) while the Missed Call Notification is  
View  
displayed. To call the entry, highlight the entry you want to  
call, and press and hold  
described previously.)  
. (Continue with the 10-4 call as  
86  
Receiving a 10-4 Call  
1. Make sure your phone’s 10-4 mode is enabled (see “Setting  
10-4 Mode” on page 82).  
2. When you receive a 10-4 call from a Contacts entry, 10-4  
Call,” the entry’s name, and the 10-4 number appear on the  
display.  
When you receive a group call, “Group Call”, group  
member’s name, and the 10-4 number appear.  
3. If the person placing the call has kept the floor (held the  
you will see the entry name and 10-4 number along with  
hasfloor.,” and you will hear the caller speaking.  
),  
4. When the caller finishes speaking and releases  
, you will  
see “Floorisopen.” on the display screen. Press and hold  
to take the floor and reply to the caller. (You will see  
Youhavefloor.” and hear a tone confirming that you may  
speak.)  
5. When the conversation is finished, press  
.
Note: You can change the volume and the speaker setting while a 10-4  
call is activated. Volume: Adjust the voice volume by using or by  
pressing the navigation key up or down (except when you are pressing  
and holding  
pressing  
). Speaker: Switch the speaker on or off by  
.
87  
10-4 Options  
When you use 10-4, several user options are available by  
Options  
pressing  
(right softkey).  
Edit to edit a 10-4 number and/or name. (See page 92.)  
SendText to send a text message. (See page 98 for details.)  
CopytoPrsnl to copy a 10-4 last call or a 10-4 Contacts entry in  
the Personal Grps., Company List or Company Grps. to the  
Personal List. (This option doesn’t appear if the entry is  
already in the Personal List.)  
CopyGroup to copy a Company Group to the Personal Group  
List. (This option doesn’t appear if the entry is already in the  
Personal Group List.)  
CopyToContacts to copy a 10-4 Contacts entry to the Contacts.  
Erase to erase a Contacts entry. EraseGroup appears when you  
highlight a group entry.  
AddContact to add a new Contacts entry. (See page 90 for  
details.) AddGroup appears when you highlight a group entry.  
(See page 91 for details.)  
Erase10-4List to erase lists saved in the 10-4 (except Company  
List/Company Grps.).  
Help to see the 10-4 instructions page.  
88  
Adding and Editing 10-4 Contacts Entry  
Copying an Entry to your Personal List , Personal Group  
List, or Contacts List  
You can copy an entry to your Personal or Personal Group List,  
or Contacts from several different sources.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to copy an entry (CompanyList, CompanyGrps.,  
PersonalList, PersonalGrps., 10-4Outgoing, 10-4Incoming, or  
10-4Missed) and press  
3. Highlight the entry you want to copy (or scroll to highlight  
the Redial entry at the top of your screen) and press  
.
Options  
(right softkey). Select an option and press  
.
CopytoPrsnl to copy the Contacts entry to the Personal  
List. (see page 88.)  
CopyGroup to copy the group entry to the Personal Group  
List. (see page 88.)  
CopyToContacts to copy the Contacts entry to the  
Contacts. (see page 88.)  
4. Press  
(left softkey) to copy and save the entry to your  
Yes  
Personal or Personal Group List, or Contacts.  
Note: Your Company Lists can be set up and edited only by an  
administrator on the 10-4 server. You cannot add or edit Contacts/group  
entries to your Company Lists.  
Saving a 10-4 Number  
You can save a 10-4 number from the ending display to your  
Personal List.  
1. From the ending display, press  
(right softkey) >Save.  
Options  
2. Enter a name and press  
.
89  
3. Press  
(left softkey) >  
(left softkey).  
Yes  
Save  
Note: If the number is already stored in the Personal or Personal Group  
lists, the “Save” option does not appear.  
Finding an Entry in the 10-4 List  
You can find your desired entry by entering a few letters.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select your desired list  
Go to  
(CompanyList, CompanyGrps., PersonalList, or PersonalGrps.)  
and press  
.
3. Enter the first letter or the first few letters of the name.  
The display shows the list beginning with the letter(s)  
you entered.  
4. Scroll through the list and press  
to select your desired  
entry.  
Adding a New Contacts Entry to Your Personal List  
You can store the total of 200 entries in the Personal List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalList> <AddContact>.  
Go to  
3. Enter a name for the new Contacts entry and press . (This is  
the name you will see when calling or receiving a call from the  
entry.)  
4. Select the 10-4Number field, enter the Contacts entry’s 10-digit  
10-4 number (their phone number) and press  
.
5. Press (left softkey) to save the new Contacts entry to  
Save  
your Personal List.  
Tip: You are not allowed to use the following symbols during step 3:  
@ : ; / * ) (.  
90  
Adding a New Group to Your Personal Group List  
You can add new groups to the Personal Group List. Each group  
can include up to five members. You can enter a group member  
directly, or select the member from the Company List or  
Personal List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalGrps. ><AddGroup>.  
Go to  
3. Enter a Group Name, and press  
(left softkey) >  
(left  
Next  
OK  
softkey).  
4. Press  
(right softkey).  
Add  
5. Select an option and press  
.
New to add a new Contacts entry. See the previous page  
for details.  
fromCompany to add a Contacts entry from your Company  
List (if applicable).  
fromPersonal to add a Contacts entry from your Personal  
List.  
6. Scroll to select the Contacts entries you want to add and press  
or  
(right softkey) to include the entries.  
Pick  
7. Press  
(left softkey) when you are finished selecting  
Done  
Contacts entries, then press  
(left softkey) to update  
Update  
your Personal Group List with the new group entry.  
Tip: You can also add members directly. From step 4 above, highlight  
<Add Members> and press . Enter the new member’s name and 10-4  
number and press  
(left softkey) to save the entry.  
Save  
91  
Editing a Contacts Entry in Your Personal List  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalList.  
Go to  
3. Highlight the entry you want to edit and press  
(right  
Options  
softkey) > Edit.  
4. Select the field you want to edit (Name or 10-4Number) and  
press  
.
5. Edit the entry, and press  
(left softkey)>  
(left softkey)  
Save  
OK  
to save your changes.  
Editing a Group in Your Personal Group List  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalGrps.  
Go to  
3. Highlight the group entry you want to edit and press  
Options  
(right softkey) > Edit.  
4. Edit the group name and press  
or  
(left softkey).  
OK  
If you don’t need to edit the group name, press  
softkey) and skip step 5.  
(left  
Next  
5. Press  
(left softkey) to save your changes.  
Save  
6. To edit a group member, highlight the Contacts entry you  
want to edit and press (right softkey) > Edit.  
Options  
7. Select the field you want to edit (Name or 10-4Number) and  
press  
.
8. Edit the entry, and press  
(left softkey) >  
(left softkey)  
Save  
OK  
>
(left softkey).  
Update  
92  
Erasing 10-4 List Entries  
ErasinganEntryinYourPersonalListorPersonalGroupList  
ToeraseaContactsentryoragroupentry:  
1. From the 10-4 List, press  
(left softkey) >PersonalList or  
Go to  
PersonalGrps.  
2. Highlight the entry you want to erase and press  
(right  
Options  
softkey) >Erase.  
EraseGroup appears when you select PersonalGrps.  
3. Select Yes.  
Toeraseagroupmember:  
1. From the 10-4 List, press  
(left softkey) >PersonalGrps.  
Go to  
2. Select your desired group and press  
to display the group  
members.  
3. Highlight the Contacts entry you want to erase and press  
(right softkey).  
Options  
4. Select Erase>Yes>  
(left softkey).  
Update  
Erasing a 10-4 List  
You can erase all lists saved in the 10-4 (except Company  
List/Company Grp. List).  
1. From the 10-4 List, press  
(right softkey) >  
Options  
Erase10-4List.  
2. Select an option and press  
.
Outgoing to erase all outgoing 10-4 calls.  
Incoming to erase all incoming 10-4 calls.  
Missed to erase all missed 10-4 calls.  
AllCalls to erase all 10-4 call history, except redial.  
AllPersonalEnt to erase all entries in Personal Lists and  
Personal Grps. You are prompted to enter your 4-digit  
lock code.  
3. Select Yes.  
Tip: The Redial number will not be erased.  
93  
Updating the Personal List and Personal Groups  
ToupdateyourPersonalListandPersonalGroupsmanually  
through10-4server:  
Select  
>Settings>10-4>ListUpdate.  
Managing 10-4 Settings  
Setting Speed Dialing for 10-4 Entries  
1. Select  
2. Select an unassigned number and press  
3. Press (left softkey), and select the list from which you  
>Contacts >SpeedDial#s.  
.
Go to  
want to set a speed dial (CompanyList, CompanyGrps.,  
PersonalList, or PersonalGrps.) and press  
.
4. Select the Contact entry and press  
.
– or –  
Select the group, and select an option and press  
.
Assign to assign the selected group as a speed dial.  
Details to display the group details. You can select the  
group member from the group list.  
Tousespeeddialfora10-4entry:  
From standby mode, press the appropriate key (locations 2-9)  
and press  
.
94  
Setting 10-4 Guard  
This feature enables you to display the warning message when  
you cannot receive 10-4 calls. The warning message appears  
when you are launching the Web or Java applications.  
1. Select  
> Settings>10-4>10-4Guard. (A message will be  
displayed.)  
2. Press  
(left softkey) to continue.  
OK  
3. Select On to activate 10-4 Guard. (Select Off to deactivate this  
feature.)  
Setting Ringer Types for 10-4 Calls  
1. Select  
>Settings>10-4> Sounds> RingerType.  
2. Select 10-4Calls, 10-4Missed, or 10-4FloorTone.  
3. Select your desired ringer type and press  
.
Setting the Ringer Volume for 10-4 Calls  
1. Select  
>Settings>10-4> Sounds> RingerVolume.  
2. Select SeparateVol. and press the navigation key left or right to  
select a volume level.  
3. Press  
(left softkey) to save.  
Done  
Setting a Vibrate Type for 10-4 Calls  
You can select your favourite vibrate type for 10-4 calls.  
1. Select  
>Settings>10-4> Sounds> VibrateType.  
2. Select 10-4Calls or 10-4Missed.  
3. Select a vibrate type and press  
.
95  
Setting an Alert Notification for 10-4 Calls  
1. Select  
>Settings>10-4> Sounds> Alerts.  
2. Select 10-4Calls, 10-4Missed, or HeadsetAlert.  
3. Select an option and press  
.
Toadjustthefloortonevolume:  
1. Select  
>Settings>10-4> Sounds> Alerts.  
2. Select FloorToneVol. >Earpiece or Speaker.  
3. Press the navigation key left or right to select a volume level  
and press  
(left softkey).  
Done  
Tip: You can also set alerts using the Alerts settings menu. (See “Alert  
Notification” on page 29.)  
Setting the Speakerphone for 10-4 Calls  
Select  
> Settings>10-4>Speakerphone>On or Off.  
Note: If the phone’s ringer volume is set to Vibrate All, or Silence All,  
the speakerphone turns off. Press  
on.  
to turn the speakerphone mode  
Selecting the Default View of the 10-4 List  
1. Select  
>Settings>10-4> DefaultView. (The default setting is  
Personal List.)  
2. Select your desired list and press  
.
Setting the Floor Display of the 10-4 Calls  
1. Select  
>Settings>10-4> FloorDisplay.  
2. Select TextOnly or Text&Image.  
To see a display preview of the Text&Image, press  
(right softkey).  
Preview  
96  
11. Messaging  
New Messages  
Toviewanewmessage:  
When you receive a text message or a Web Alert, it will  
automatically appear on your phone’s main display screen  
with the  
information of the message appears on your phone’s main  
display screen with the icon. Press (left softkey),  
then (left softkey) to view the message.  
icon. When you receive a picture message, the  
View  
Go  
Note: When there are two or more notifications, a Missed Alerts list is  
displayed in standby mode. Highlight a text/picture message in the  
list and press  
(left softkey) to display the message details.  
View  
You can choose to show only the icon when you receive a  
message(s). In this case, select > Messaging >Text,  
Pic. Msg, or Web Alerts, and select a message and press  
to  
view a message. See “Setting Message Notification Display” on  
page 37.  
When you have duplicated messages, the information of the  
message appears on your phone’s main display screen with the  
icon. After opening the messages,  
icon will display.  
Press  
(left softkey) and use your navigation key to scroll  
View  
down and view the entire message.  
Press  
Press  
Press  
Press  
(left softkey) to dial the callback number.  
Call  
(left softkey) to reply to the sender.  
Reply  
(left softkey) to go to the Web site.  
Go  
(left softkey) to forward the message (appears  
Forward  
only if there is no sender’s phone number, email address, or  
callback number).  
Press  
(right softkey) to display options.  
Options  
Displaying Messages  
Todisplayatextmessagefromthemainmenu:  
1. Select  
2. Select Text >Inbox, SentMail, Pending, Drafts, or your defined  
folder and press  
3. Select the message you want to see and press . (To display  
the message options, press [right softkey].)  
>Messaging.  
.
Options  
97  
Todisplayapicturemessagefromthemainmenu:  
1. Select >Messaging>Pic. Msg.  
2. Select your desired picture message and press  
3. Press (left softkey) to display the picture message.  
.
Go  
TodisplayWebAlerts:  
1. Select >Messaging>WebAlerts.  
2. Select the header of the message you want to see and press  
.
(To display the web alerts options, press  
[right  
Options  
softkey].)  
Toreadothermessages:  
Press the navigation key right or left to read the next or  
previous message.  
Note: Web Alerts include URLs etc. When you buy a ringer or image  
through your computer for your phone, your phone will receive Web  
Alerts. Press  
(left softkey) to go to the website and follow steps to  
Go  
download it to your phone.  
Sending a Text Message  
1. Select  
>Messaging>SendText.  
2. Select the entry method you prefer:  
Contacts to select a recipient from your internal Contacts.  
(Qualifying Contacts entries must contain a phone  
number or an email address.) After selecting, press  
(left softkey).  
Done  
Phone# to enter the phone number of the person to  
whom you wish to send a message. After entering the  
number, press  
Email to enter the recipient’s email address. After  
.
entering the email address, press  
.
Note: You can also press  
(right softkey) to select recipients from  
Others  
your desired list.  
You may include up to 25 recipients per message.  
3. Press (left softkey) when you have finished selecting and  
Next  
entering recipients.  
98  
4. Compose a message and press  
or  
(left softkey).  
OK  
To enter a message, use your keypad to type your  
message. Press (right softkey) to select a character  
Mode  
input mode. (See “Selecting a Character Input Mode” on  
page 22.)  
5. Scroll down to select the message priority (Normal or Urgent).  
6. Press  
(right softkey) > SendCallback#.  
Options  
7. Review your message and press  
(left softkey). (You may  
Send  
also select additional messaging options by pressing  
Options  
[right softkey] to change the recipients or save to drafts.)  
Tip: You can also send a text message when the left softkey displays the  
option.  
Send Text  
Creating Folders for Messages  
You can create up to ten folders to store your Messages. When  
10 of your defined folders exist, the “Create Folder” option will  
not appear.  
Tocreateanewfolder:  
1. Select  
>Messaging>Text.  
(right softkey) >CreateFolder.  
2. Press  
Options  
3. Enter a folder name and press  
4. Press (left softkey).  
.
Save  
Tosetanoptionalfeaturefortheaddedfolder:  
1. During step 3 above, scroll down to select other menu options.  
AutoFilingto file messages into the folder automatically.  
The following options appear when this feature is set to on.  
Keywordto set a keyword for Auto Filing. Enter a  
keyword and press  
.
Notify to set the notification display to on or off when  
you have an unread message matching the defined  
folder.  
EnvelopeIcon to set the envelope icon display to on or  
off when you have unread message matching the  
defined folder.  
2. Press  
(left softkey).  
Save  
99  
Erasing Messages  
1. Select  
>Messaging>Text.  
2. Select Inbox, SentMail, Pending, Drafts, or your defined folder  
and press  
.
3. Highlight a message you want to erase and press  
(right  
Options  
softkey)>Erase.  
4. Select This.  
Tip: This option may not be displayed if you save only one message in a  
folder.  
To erase all messages, select All.  
5. Select Yes.  
Erasing Selected Messages in All Folders  
1. Open any message folder. (By following steps 1-2 above.)  
2. Press  
3. Press  
4. Press  
(right softkey) >Erase> Multiple.  
Options  
to select messages to be erased.  
(left softkey).  
Erase  
100  
®
12. Using Bluetooth  
Bluetooth is a short-range communications technology that  
allows you to connect wirelessly to a number of Bluetooth  
devices, such as headsets, hands-free car kits, and Bluetooth  
enabled handhelds, PCs, and wireless phones. The Bluetooth  
communication range is usually up to approximately 10 meters  
(30 feet).  
Accessing the Bluetooth Settings Menu  
Select  
>Settings>Bluetooth.  
Turning Bluetooth On and Off  
By default, your phone’s Bluetooth feature is turned off. Turning  
Bluetooth on makes your phone “available” to other in-range  
Bluetooth devices. To make your phone visible to other devices,  
you must also set your phone’s visibility to other than Hidden.  
(See page 102.)  
1. From the Bluetooth Settings menu display, select  
Enable/Disable.  
2. Select Enable to enable Bluetooth. Select Disable to disable  
Bluetooth.  
Note: Enabling the Bluetooth settings affect the phone’s talk and standby  
times.  
Bluetooth Status Indicators  
The following icons show your Bluetooth connection status at a  
glance:  
– Bluetooth feature is active (actual icon is blue, turning to  
green when connected to a Bluetooth device).  
Your phone is discoverable by another Bluetooth device.  
Your phone is communicating with a Bluetooth device.  
101  
Using the Bluetooth Settings Menu  
The Bluetooth Settings(BTSettings) menu allows you to set up  
many of the characteristics of your phone’s Bluetooth service,  
including:  
Setting your phone’s visibility (or “discoverability”) for other  
Bluetooth devices  
Choosing a device for your Bluetooth calls  
Entering or changing the name your phone uses for Bluetooth  
communication  
Displaying your phone’s Bluetooth device information  
Bluetooth Settings: Visibility  
Visibility to allow you to manage your phone’s availability to  
other Bluetooth devices.  
1. From the Bluetooth Settings menu display, select Visibility.  
2. Select a Visibility setting and press  
.
AlwaysVisible to allow other Bluetooth devices to detect  
and identify your phone.  
Visible3min. to allow other Bluetooth devices to detect  
your phone for 3 minutes, after which it returns to hidden  
mode.  
Hidden to prevent other Bluetooth devices from  
detecting and identifying your phone.  
Note: It is recommended that your phone is in standby mode when  
receiving data from other devices via Bluetooth.  
Bluetooth Settings: Voice Priority  
VoicePriority defines which has the priority, your phone or a  
hands-free device, for the call if a hands-free device is connected  
to your phone.  
1. From the Bluetooth Settings menu display, select  
VoicePriority.  
102  
2. Select Phone or Hands-free.  
Phone to route the call through the device with which  
you answer the incoming call.  
Hands-free to route the call through the hands-free device  
even if you answer the incoming call with your phone.  
Tip: You can switch the call to your phone or to the hands-free device by  
pressing  
call.  
(right softkey) > Transfer Audio anytime during the  
Options  
Bluetooth Settings: Device Name  
DeviceName allows you to select a Bluetooth name for your  
phone. Your phone’s Bluetooth name will appear to other in-  
range Bluetooth devices, depending on your Visibility settings.  
1. From the Bluetooth Settings menu display, select DeviceName.  
2. Press and hold  
to clear the current name.  
3. Use your keypad to enter a new name and press  
.
Bluetooth Settings: Device Information  
Todisplayyourphone’sdeviceInformation:  
From the Bluetooth Settings menu display, select DeviceInfo.  
Setting Auto-Accept  
You can configure your phone’s accessibility to other Bluetooth  
devices.  
1. Select  
2. Highlight the device from the trusted devices list and press  
(right softkey) > Auto-Accept.  
>Tools>Bluetooth.  
Options  
3. Select a setting and press  
.
Onto allow other Bluetooth devices to initiate a  
connection without any confirmation.  
Offto display a confirmation screen, from which you can  
accept or deny the connection.  
103  
Bluetooth Profiles  
All the Bluetooth settings you configure are stored in your  
phone’s Bluetooth user profile. Different profiles can be used for  
specific Bluetooth functions.  
HeadsetProfile – This profile functions as a wireless ear jack.  
When an incoming call is received, the ringer can be heard  
through the headset. While using your phone, you can use the  
headset instead of the phone by pushing a button on the  
headset, which has the same effect as inserting a jack into the  
phone. Increase or decrease the volume by using  
on  
.
the left side of the phone  
Hands-FreeProfile – This profile functions as a wireless car kit.  
Incoming calls ring to the hands-free headset or device. Calls  
can be received by pressing a button on the headset or device.  
For dialing, four functions are supported: recent call dial,  
voice dial, speed dial, and number dial. Increase or decrease  
the volume by using  
.
DUN:Dial-UpNetworkProfile – This profile functions as a  
wireless data cable, connecting a PC or PDA to a network  
through your phone.  
OPP:ObjectPushProfile – This profile uses the Generic Object  
Exchange profile services to send data objects between  
devices and can be used to exchange objects like business  
cards (vCard).  
104  
Pairing Bluetooth Devices  
Paired Devices  
The Bluetooth pairing process allows you to establish a trusted  
connection between your phone and another Bluetooth device.  
When devices are paired, a passcode (PIN Code) is shared  
between devices, allowing for fast, secure connections while  
bypassing the discovery and authentication process.  
TopairyourphonewithanotherBluetoothdevice:  
1. Select  
>Tools>Bluetooth><AddNew>>Search. (Your  
phone will display a list of discovered in-range Bluetooth  
devices.)  
2. Select the device you wish to pair with and press  
.
3. Select AddtoTrusted.  
4. Enter the passcode and press . (When the owner of the  
other device accepts the connection and enters the same  
code, the pairing is complete.)  
Waiting for Request  
If you are going to be using a Dial-Up Network (DUN) profile to  
pair with a PC or PDA, you will need to allow the other device to  
initiate pairing with your phone.  
ToallowyourphonetobepairedwithanotherBluetoothdevice:  
1. Select  
2. Follow the onscreen prompts to enter your passcode and  
press  
>Tools>Bluetooth><AddNew>>WaitforRequest.  
.
105  
Using the Trusted Devices Options  
Once you have created paired devices, several options are  
available from the trusted devices list.  
Tousethetrusteddevicesoptions:  
1. From the trusted devices list, highlight a device.  
2. Press  
(right softkey) to display the following options:  
Options  
Connect or Disconnect to connect to or disconnect from  
the Bluetooth device (if applicable).  
SendItem to send an item saved on your phone to another  
Bluetooth device (if applicable).  
EditName to edit the name of the trusted device.  
Auto-Acceptto configure your phone’s accessibility to  
other Bluetooth devices. (See page 103.)  
DeviceInfo to display the trusted device’s information.  
Sortby to sort the trusted devices.  
Delete to delete the selected device from the list.  
DeleteAll to delete all devices from the list.  
Settings to display the Bluetooth settings menu.  
(See page 102.)  
106  
Sending Data via Bluetooth  
You can send data saved on your phone to another Bluetooth  
device.  
1. Select  
2. Highlight the device from the trusted devices list and press  
(right softkey)>SendItem.  
>Tools>Bluetooth.  
Options  
3. Select your desired item (BusinessCard, Contacts) and press  
.
4. Follow the onscreen instructions to select the item(s) to send.  
5. Make sure the other device is ready to receive data, and then  
press  
(left softkey).  
Send  
6. If necessary, enter the PIN and press  
.
Note: Due to different specifications and features of other Bluetooth  
wireless technology compatible devices, display and operations may be  
different, and functions such as transfer or exchange may not be  
possible.  
107  
13. Service Features  
Using Voicemail  
All unanswered calls to your phone are automatically transferred  
to voicemail, even if your phone is in use or turned off.  
Voicemail Notification  
There are several ways your phone alerts you to new voicemail  
messages:  
By displaying a message on the screen.  
By playing the assigned ringer type.  
By blinking the LED.  
By displaying  
at the top of your screen.  
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts you  
and prompts you to call your voicemail.  
Tocallyourvoicemail:  
Press  
– or –  
.
Select >Messaging>Voicemail>CallVoicemail or  
Call:SpeakerOn if you select IconOnly in Notification setting.  
(See “Setting Message Notification Display” on page 37.)  
Todisplayyourmissedalerts:  
Select  
> MissedAlerts.  
Displaying Voicemail Details  
Select  
> Messaging> Voicemail>Details.  
108  
Retrieving Your Voicemail Messages  
Press and hold  
. (Your phone will dial your voicemail  
box.)  
– or –  
Select  
> Messaging>Voicemail>CallVoicemail.  
Note: You are charged for airtime minutes when you are accessing your  
voicemail from your phone.  
Clearing the Message Icon  
Press  
> Messaging>Voicemail>ClearCount>Yes.  
Editing Your Voicemail Number  
You may need to change the number to retrieve your voicemail.  
Tochangethenumber:  
1. Select  
> Messaging > Voicemail > EditVoicemail#.  
2. Edit your voicemail number and press  
.
Toresetyourvoicemailnumber:  
1. Select  
2. Press  
3. Press  
> Messaging > Voicemail > EditVoicemail#.  
(right softkey) > ResetVoiceml.# > Yes.  
Options  
.
109  
Responding to Call Waiting  
When you are on a call, Call Waiting alerts you to incoming calls  
by sounding beeps. Your phone’s screen informs you that  
another call is coming in and displays the caller’s phone number  
(if available).  
Torespondtoanincomingcallwhileyou’reonacall:  
Press  
. This puts the first caller on hold and answers the  
second call.  
Toswitchbacktothefirstcaller:  
Press  
again.  
Note: Call Waiting may not be available while roaming off the home network.  
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the same  
time. When using this feature, the normal airtime rates will be  
charged for each of the two calls.  
1. Enter a number you wish to call and press  
or  
.
2. Once you have established the connection, press  
to put  
the first caller on hold.  
3. Enter the second number you wish to call and press  
.
4. When you’re connected to the second party, press  
again  
to begin your three-way call.  
If one of the people you called hangs up during your call, you  
and the remaining caller stay connected. If you initiated the call  
and are the first to hang up, all three callers are disconnected.  
110  
Web  
With Web access on your phone, you will be able to browse  
full-color graphic versions – not just text versions – of your  
favourite website, making it easier than ever to stay informed  
while on the go. Check sports scores, trade stocks, and shop all  
on your phone anywhere on the Home network.  
Launching the Web  
Press Web(right softkey).  
– or –  
Select  
> Web.  
Net Guard  
With the Net Guard setting, the confirmation display will appear  
to connect to the Internet. This feature helps you avoid  
accidental connections. You can disable the Net Guard in the  
future by selecting AlwaysAuto-Connect when the Net Guard is  
displayed.  
Select  
> Settings>Internet>NetGuard.  
On to enable the Net Guard.  
Off to disable the Net Guard.  
Browsing the Web  
CreatingaBookmark  
Bookmarks allow you to store the address of your favourite  
websites for easy access at a later time.  
1. Launch the Web page you want to mark.  
2. Press right softkey to go to the browser menu.  
3. Select Markthispage>  
(left softkey).  
OK  
4. Press  
(left softkey).  
OK  
Note: Bookmarking a page does not store the page contents, just its  
address.  
Some pages cannot be bookmarked. Whether a particular Web  
page may be marked is controlled by its creator.  
111  
AccessingaBookmark  
1. Launch the Web and press right softkey to access the browser  
menu.  
2. Select ViewBookmarks.  
3. Highlight the bookmark you wish to access and press  
(left  
OK  
softkey).  
EditingaBookmark  
1. Access ViewBookmarks menu. (See “Accessing a Bookmark”  
above.)  
2. Highlight the bookmark you wish to edit and press the right  
softkey.  
3. Select EditAddress or Edittitle.  
4. Press  
(right softkey) to edit the address or title, and press  
Edit  
(left softkey).  
OK  
5. Press  
(left softkey) twice.  
OK  
DeletingaBookmark  
1. Access ViewBookmarks menu. (See “Accessing a Bookmark”  
shown above.)  
2. Highlight the bookmark you wish to erase and press right  
softkey.  
3. Select Delete>  
(right softkey) >  
(left softkey).  
OK  
Yes  
GoingtoaSpecificWebsite  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select GotoURL... >Address.  
3. Enter the URL of the website you wish to go to, and press  
OK  
(left softkey).  
Note: Not all websites are viewable on your phone.  
112  
ReloadingaWebPage  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select Refreshthispage.  
RestartingtheWebBrowser  
If the Web browser seems to be malfunctioning or stops  
responding, you can usually fix the problem by simply restarting  
the browser.  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. SelectMore... > RestartBrowser.  
SendingaWebPage  
This feature allows you to send a URL (Web site address) you’re  
viewing through text messaging.  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select SendPage.  
3. To complete and send a Web Page, follow steps 2-7 in  
“Sending a Text Message” on page 98.  
AdjustingtheBrowserSoundVolume  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select More... > Preferences > SoundVolume.  
3. Select your desired volume level by pressing the navigation  
key and press  
.
113  
Downloading through the Wireless Web  
Your phone allows you to download images (screen savers),  
ringers, games, etc., from a website.  
1. Select  
> MyContent.  
2. Select your desired data folder (for example, Games, Ringers,  
ScreenSavers, or Applications).  
3. Select GetNew to start up the browser.  
4. Select your desired image or ringer file, and follow the system  
prompts.  
114  
14. Safety Guidelines  
Maintaining Your Phone’s Peak Performance  
To maximize performance, do not touch the bottom portion  
of your phone where the internal antenna is located while  
using the phone.  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, turn the power off and  
immediately remove the battery.  
Do not expose your phone to direct sunlight for extended  
periods of time (such as on the dashboard of a car).  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting,  
bending, or sitting on it.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this equipment.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone  
without a hands-free device) is prohibited in some jurisdictions.  
Laws vary as to specific restrictions.  
Let the person you are speaking to know you are driving; if  
necessary, suspend the call in heavy traffic or hazardous  
weather conditions.  
Do not take notes or look up phone numbers while driving.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any  
special regulations in a given area. Turn your phone off in areas  
where use is forbidden or when it may cause interference or  
danger.  
115  
UsingYourPhoneNearOtherElectronicDevices  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, RF signals from wireless  
phones may affect inadequately shielded electronic equipment.  
RF signals may affect improperly installed or inadequately  
shielded electronic operating systems and/or entertainment  
systems in motor vehicles. Check with the manufacturer or their  
representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the  
manufacturer regarding any equipment that has been added to  
your vehicle.  
Consult the manufacturer of any personal medical devices, such  
as pacemakers and hearing aids, to determine if they are  
adequately shielded from external RF signals.  
Note: Always turn off the phone in health care facilities and request  
permission before using the phone near medical equipment.  
Turning Off Your Phone Before Flying  
Turn off your phone or set your phone to Airplane mode before  
boarding any aircraft. To prevent possible interference with  
aircraft systems, Transport Canada regulations require you to  
have permission from a crew member to use your phone while  
the plane is on the ground.  
116  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone  
off when in a blasting area or in other areas with signs indicating  
two-way radios should be turned off. Construction crews often  
use remote-control RF devices to set off explosives.  
Turn your phone off when you’re in any area that has a  
potentially explosive atmosphere. Although it’s rare, your  
phone and accessories could generate sparks. Sparks can cause  
an explosion or fire, resulting in bodily injury or even death.  
These areas are often, but not always, clearly marked. They  
include:  
Fuelling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as  
grain, dust, or metal powders.  
Any other area where you would normally be advised to turn  
off your vehicle’s engine.  
Note: Never transport or store flammable gas, liquid or explosives in the  
compartment of your vehicle that contains your phone or accessories.  
117  
Restricting Children’s Access to Your Phone  
Your phone is not a toy. Do not allow children to play with it as  
they could hurt themselves and others, damage the phone or  
make calls that increase your telephone bill.  
Protecting Your Battery  
The guidelines listed below help you get the most out of your  
battery’s performance.  
Use only approved batteries and chargers. These chargers are  
designed to maximize battery life. Using other batteries or  
chargers voids your warranty and may cause damage.  
In order to avoid damage, charge the battery only in  
temperatures that range from 0º C to 45º C (32º F to 113º F).  
Don’t store the battery in a high humidity environment.  
Don’t use the battery charger in direct sunlight or in high  
humidity areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
Don’t store the battery in high temperature areas for long  
periods of time. It’s best to follow these storage rules:  
Less than one month:  
-20º C to 60º C (-4º F to 140º F)  
More than one month:  
-20º C to 45º C (-4º F to 113º F)  
118  
Disposal of Lithium Ion (Li-Ion) Batteries  
For safe disposal options of your Li-Ion batteries, please ensure  
that disposal of this in accordance with law and regulation.  
Do not dispose of the battery in fire; the cell may explode.  
Do not open or puncture the battery; the released electrolyte  
is corrosive and may cause damage to the eyes and skin.  
SpecialNote: Be sure to dispose of your battery properly. In some  
areas, the disposal of batteries in household or business trash  
may be prohibited.  
Note: For safety, do not handle a damaged or leaking Li-Ion battery.  
Cautions  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
phone warranty if said accessories cause damage or a defect to  
the phone.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
119  
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or  
registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part  
on the work of the Independent JPEG Group.  
TM  
Powered by JBlend Copyright 1997-2007 Aplix Corporation. All rights reserved.  
JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix  
Corporation in Japan and other countries.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by  
SANYO is under license. Other trademarks and trade names are those of their respective owners.  
Java & all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems  
Inc. in the U.S. and other countries.  
120  
H
Headset Mode 44  
Index  
I
A
Icon Definition 5, 75  
In-Call Options 16  
Abbreviated Dialing 21, 43  
Airplane Mode 39  
Alarm Clock 73  
K
Alert Notification 29, 96  
Animation 33  
Answering Calls 13  
Any Key Answer 42  
Auto Answer 42  
Auto Key Guard 45  
Key Beep Volume 27  
Key Guard 45  
Key Press Echo 29  
L
Language 22, 38, 42, 45  
Location Settings 35  
Lock Code 47  
Lock Mode 47  
Locking Your Phone 46  
B
Background 32  
Backlight 31  
Battery  
Charging 9  
Installing 8  
Removing 8  
Bluetooth 101  
Bookmarks 111  
M
Making Calls 11  
Menu Diagram 54  
Menu Style 31  
Message Notification Display 37  
Messaging 37, 97  
Missed Call Notification 14, 86  
My Content  
Accessing Menus 114  
Erasing 49  
My Favourites 41  
C
Calculator 75  
Calendar 34, 67  
Call Alarm 69  
Call History 56  
Call Memo 78  
Call Waiting 110  
Callback Number 38  
Canned Messages 22, 37  
Contacts 59  
N
Net Guard 111  
P
Parental Control Feature 51  
Phone (illus.) 2  
Phone Number  
Dialing With Pauses 19  
Displaying 11, 75  
Finding 18  
Contrast 33  
D
Dialing Options 12  
Display Screen Icons 5, 75  
Display Settings 31  
Saving 18, 19  
E
Emergency Numbers 15  
Entering Text 22  
121  
R
V
Resetting Your Phone 50  
Restricting Calls 48  
Ringer Types 26, 95  
Roaming 53  
Vibrate Type 28, 95  
Voice-Activated Dialing 76  
Voice Dial Tags  
Erasing 77  
Playing 77  
S
Programming 76  
Voice Memo 78  
Voice Prompt 28  
Voicemail  
Clearing Message Icon 109  
Editing Number 109  
Notification 108  
Retrieving 109  
Safety 115  
Screen Call 13, 80  
Screen Saver 33  
Security Menu 46  
Silence All 30  
Sleep Mode 34  
Sound Settings 26  
Special Numbers 48  
Speed Dialing 20, 64, 94  
Start-up/Power-off Tone 28  
Stopwatch 74  
Volume Settings 27, 95  
W
Web 111  
World Clock 74  
T
T9 Text Input 23  
Text Greeting 32  
Text Message 97  
Three-Way Call 110  
To Do List 70  
Tone Length 28  
TTY 40  
Turning Your Phone On and Off 7  
U
Unlocking Your Phone 47  
122  
Notes  

Timex Clock T235 IB User Manual
Sony Ericsson XPERIA ACRO IS11S User Manual
Sony CD Walkman D F411 User Manual
Silicon Laboratories SI5324 User Manual
Samsung SH S223L User Manual
Samsung SGH N620E User Manual
Samsung GH68 24941A User Manual
Samsung 840 Pro 256 Gb 25&quot; Internal Solid State Drive MZ7PD256Z User Manual
Polycom SpectraLink NetLink H340 User Manual
Philips 9305 125 24775 User Manual