Sprint PCS® Service
Sprint PCS VisionSM Phone
VI-A820 by Samsung®
www.sprint.com
© 2005 Sprint Nextel. All rights reserved. No reproduction in whole or in part
without prior written approval. Sprint, the “Going Forward” logo, the NEXTEL
name and logo, and other trademarks are trademarks of Sprint Nextel.
Printed in South Korea.
Table of Contents
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Erasing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Erasing Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Using Voice Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Using Name Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
SM
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Welcome to Sprint
Sprint is committed to bringing you the best wireless
technology available. We built our complete, nationwide
network from the ground up, so all your services – whether
it’s Voicemail, Caller ID, email, or Sprint PCS Vision – will work
the same wherever you go on the Nationwide Sprint PCS
Network.
This guide will familiarize you with our technology and your
new Sprint PCS Phone through simple, easy-to-follow
instructions. It’s all right here – from setting up your account
passwords and voicemail to using the most advanced
features of Sprint PCS VisionSM.
Welcome and thank you for choosing Sprint.
i
Introduction
This Phone Guide introduces you to Sprint PCS Service and all
the features of your new phone. It’s divided into four
sections:
ࡗ ࡗ ࡗ ࡗ Section 1: Getting Started
Section 2: Your Sprint PCS Phone
Section 3: Sprint PCS Service Features
Section 4: Safety and Warranty Information
Throughout this guide, you'll find tips that highlight special
shortcuts and timely reminders to help you make the most of
your new phone and service. The Table of Contents and Index
will also help you quickly locate specific information.
You'll get the most out of your phone if you read each section.
However, if you'd like to get right to a specific feature, simply
locate that section in the Table of Contents and go directly to
that page. Follow the instructions in that section, and you'll
be ready to use your phone in no time.
Due to updates in phone software, this printed guide
may not be the most current version for your phone.
Visit www.sprint.com and sign on to My PCS to access
the most recent version of the phone guide.
Phone
Guide
Note:
ii
2
Section 1A
Setting Up Service
In This Section
ࡗ ࡗ ࡗ ࡗ Setting up service on your new Sprint PCS Phone is quick
and easy. This section walks you through the necessary steps
to unlock your phone, set up your voicemail, establish
passwords, and contact Sprint for assistance with your
Sprint PCS Service.
3
Getting Started With Sprint PCS Service
Determining if Your Phone is Already Activated
If you purchased your phone at a Sprint Store, it is probably
activated, unlocked, and ready to use. If you received your
phone in the mail, it probably has been activated; all you
need to do is unlock it.
If your phone is not activated, please refer to the
Sprint Activation Card included with your phone.
Unlocking Your Phone
To unlock your phone, follow these easy steps:
1. Press and hold
for a few seconds to turn the phone on.
2. Press Unlock ( ).
To select a softkey, press the softkey button directly below the
softkey text that appears at the bottom left and bottom right
of your phone’s display screen. Softkey actions change
according to the screen you’re viewing and will not appear if
there is no corresponding action available.
Note:
3. Enter your four-digit lock code. (For security purposes,
the code is not visible as you type.)
If you can’t recall your lock code, try using the last four digits
of either your Social Security number or Sprint PCS Phone
number or try 0000 or NATL (6285). If none of these work, call
Sprint Customer Service at 1-888-211-4PCS (4727).
Tip:
4
Setting Up Your Voicemail
All unanswered calls to your Sprint PCS Phone are
automatically transferred to your voicemail, even if your
phone is in use or turned off. Therefore, you will want to set
up your voicemail and personal greeting as soon as your
Sprint PCS Phone is activated.
To set up your voicemail:
1. From standby mode, press and hold
.
2. Follow the system prompts to:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Create your pass code
Record your name announcement
Record your greeting
Choose whether or not to activate One-Touch
Message Access (a feature that lets you access
messages simply by pressing and holding
,
bypassing the need for you to enter your pass code)
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends you enable your
voicemail pass code.
Note:
For more information about using your voicemail, see “Using
5
Sprint PCS Account Passwords
As a Sprint PCS customer, you enjoy unlimited access to your
personal account information, your voicemail account, and
your Sprint PCS Vision account. To ensure that no one else has
access to your information, you will need to create passwords
to protect your privacy.
Account Password
If you are the account owner, you'll have an account password
Customer Service. Your default account password is the last
four digits of your Social Security number. If you are not the
account owner (if someone else receives the invoice for your
Sprint PCS Service), you can get a sub-account password at
www.sprint.com.
Voicemail Password
You'll create your voicemail password (or pass code) when you
set up your voicemail. See “Setting Up Your Voicemail” on
page 178 for more information on your voicemail password.
Sprint PCS Vision Password
With your Sprint PCS Vision Phone VI-A820 by Samsung, you
may elect to set up a Sprint PCS Vision Password. This
optional password may be used to authorize purchase of
Premium Services content and to protect personal
information on multi-phone accounts.
For more information, or to change your passwords, sign on
1-888-211-4PCS (4727).
6
Getting Help
Visit www.sprint.com
You can go online to:
ⅷ
Access your account information
ⅷ
Check your minutes used (depending on your
Sprint PCS Service Plan)
ⅷ
ⅷ
View and pay your bill
Make your life easier by enrolling in Sprint PCS Online
Billing and Automatic Payment
ⅷ
ⅷ
ⅷ
ⅷ
Purchase accessories
Shop for the latest Sprint PCS Phones
View available Sprint PCS Service Plans and options
Learn more about Sprint PCS Vision and other great
products like Sprint PCS Picture MailSM, games, ringers,
screen savers, and more
Reaching Sprint Customer Service
You can reach Sprint Customer Service many different ways:
ⅷ
ⅷ
ⅷ
Dial
on your Sprint PCS Phone
Sign on to your account at www.sprint.com
Call us toll-free at 1-888-211-4727 (Consumer customers)
or 1-888-788-4727 (Business customers)
ⅷ
Write to us at Sprint Customer Service, P.O. Box 8077,
London, KY 40742
7
Receiving Automated Invoicing Information
For your convenience, your phone gives you access to
invoicing information on your Sprint PCS Account. This
information includes balance due, payment received,
invoicing cycle, and an estimate of the number of minutes
used since your last invoicing cycle. (Normal airtime usage
will apply.)
To access automated invoicing information:
ᮣ
Press
.
This service may not be available in all Affiliate areas.
Note:
Sprint PCS Directory Assistance
You have access to a variety of services and information
through Sprint PCS Directory Assistance, including
residential, business, and government listings; assistance
with local or long-distance calls; movie listings; and hotel,
restaurant, shopping, and major local event information.
There is a per-call charge, and you will be billed for airtime.
To call Sprint PCS Directory Assistance:
ᮣ
Press
.
8
Sprint PCS Operator Services
Sprint PCS Operator Services provides assistance when
placing collect calls or when placing calls billed to a local
telephone calling card or third party.
To access Sprint PCS Operator Services:
ᮣ
Press
.
For more information or to see the latest in products and
Sprint PCS Operator Services may not be available in all
Affiliate areas.
Note:
9
10
12
Section 2A
Your Sprint PCS Phone: The Basics
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Phone is packed with features that simplify
your life and expand your ability to stay connected to the
people and information that are important to you. This
section will guide you through the basic functions and calling
features of your phone.
13
Front View of Your Phone
1. Speaker
2. Display Screen
3. Headset Jack
4. OK/Menu Key
21. Speaker Key
5. Left Softkey
20. Right Softkey
6. Ready Link Key
19. Navigation Key
18. END Key
17. BACK Key
7. TALK Key
8. Volume Key
9. Voicemail Key
10. Numeric Keypad
16. Space/Pound Key
11. Shift/Asterisk Key
15. Plus Code
Dialing Key
14. Microphone
13. Accessory Interface
Connector
12. Power Interface
Connector
14
Key Functions
1. Speaker: The speaker allows you to hear the other caller
and the different ring tones and sounds offered by your
phone.
2. Display Screen: This screen displays all the information
needed to operate your phone.
3. Headset Jack: Allows you to plug in an optional headset
for convenient, hands-free conversations.
4. OK/Menu Key: Press (
) to access the menu screen. It
also allows you to accept choices when navigating
through a menu.
5. Left Softkey: This key is used to navigate through menus
and applications by selecting the choice available in the
Left Softkey Option on your display screen.
6. Ready Link Key: Press to activate Sprint PCS Ready Link
7. TALK Key: Allows you to place or receive a call. In standby
mode, press the key once to access the Recent call log. If
you press and hold the key down, you will initiate the
Voice Recognition feature.
8. Volume Key: Allows you to adjust the ringer volume in
standby mode (with the flip open) or adjust the voice
volume during a call. The volume key can also be used to
scroll up or down to navigate through the different
menu options. To mute the ringer during an incoming
call, press the volume key up or down.
9. Voicemail Key: Press and hold to automatically dial your
voicemail.
10. Numeric Keypad: Use these keys to enter numbers,
letters, and characters.
15
11. Shift/Asterisk Key: Enters the asterisk [*] character for
calling features. In text entry mode, press to change the
capitalization mode.
12. Power Interface Connector: This connector is used to plug
in the charging accessories.
13. Accessory Interface Connector: This connector is used
connect any available accessory cables to your phone.
14. Microphone: The Microphone allows the other caller to
hear you clearly when you are speaking to them.
15. Plus Code Dialing Key: Automatically dials the
international access code for the country in which you
are located (for instance, 011 for international calls
placed from the United States).
16. Space/Pound Key: Enters the pound [#] character for
calling features. In text entry mode, press to enter a
space.
17. BACK Key: Deletes characters from the display when you
are in text entry mode. When in a menu, press to return
to the previous menu. This key also allows you to return
to the previous screen in a Sprint PCS Vision session.
18. END Key: Ends a call. Press and hold this key for a few
seconds to turn your phone on or off. While in the main
menu, it returns the phone to standby mode and
cancels your input. When you receive an incoming call,
press to enter silent mode and mute the ringer.
19. Navigation Key: This key allows you to scroll through the
phone menu options and provides a shortcut to phone
functions from standby mode.
20. Right Softkey: This key is used to navigate through
menus and applications by selecting the choice
available in the Right Softkey Option on your display
screen.
16
21. Speaker Key: In stand-by mode, press and hold to launch
voice recognition. Press once to display the recent call
log. If the flip is closed, press and hold with the Ready
Link key to disable/enable the key guard. While on a call,
press to turn speakerphone on or off.
17
Viewing the Display Screen
Your phone’s display screen provides a wealth of information
about your phone’s status and options. This list identifies the
symbols you’ll see on your phone’s display screen:
To view a list of your phone’s icons and descriptions, from the
main menu select Settings > Phone Info > Icon Glossary.
Tip:
displays your current signal strength. The more lines
you have, the stronger your signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates Ready Link is being used.
indicates Ready Link is disabled.
indicates Ready Link/Speaker On is enabled.
indicates that you have voicemail, text,
numeric pages, picture messages, or Sprint PCS Web
Alert messages waiting. Press
briefly to see a
list of pending messages or press and hold
dial your voicemail box.
to
indicates that there is an unread message in
your inbox.
indicates that the text message has been read.
indicates that there is an unread urgent message in
your inbox.
indicates that you have read the urgent message.
indicates that you have new voicemail.
18
indicates that you have a new text message.
indicates that there is an unread URL message in
your inbox.
indicates that the URL message has been read.
indicates that there is an unread urgent URL
message in your inbox.
indicates that you have read the urgent URL
message.
indicates that there is an unchecked Voice SMS
message in your inbox.
indicates that the Voice SMS message has been
checked.
indicates that the message was sent.
indicates that the message failed to send.
indicates that you have a pending message.
indicates that the message is a draft.
indicates that your Sprint PCS Vision connection is
active.
indicates that your Sprint PCS Vision connection is
dormant or inactive.
indicates that you are receiving information.
indicates that you are sending information.
indicates that your phone is in vibrate only mode.
indicates that your phone is in ringer+vibrate mode.
19
indicates that the ringer is set at a level between 1-
8 or that 1-Beep is selected.
indicates that the ringer is turned off.
shows your current battery charge strength. (Icon
shown fully charged in idle mode and completely
empty.)
indicates that position location is active.
indicates that position location is inactive.
indicates that the TTY option is on.
indicates that your phone is roaming.
indicates that your message is locked.
indicates that your phone is in Web security mode.
indicates that an alarm is set on your phone.
indicates that a file (ringer, game, screen saver, java
app, etc.) has been downloaded to your phone.
20
Features of Your Sprint PCS Phone
Congratulations on the purchase of your Sprint PCS Phone.
The Sprint PCS Vision Phone VI-A820 by Samsung is
lightweight, easy-to-use, and reliable, and it also offers many
significant features and service options. The following list
previews some of those features and provides page numbers
where you can find out more:
ⅷ
Tri-Mode capability allows you to make and receive calls
while on the Nationwide Sprint PCS Network and to roam
on other 1900 and 800 MHz digital networks where
Sprint has implemented roaming agreements (page 79).
ⅷ
ⅷ
ⅷ
Sprint PCS Ready LinkSM provides instant walkie-talkie-
style communication between 2 or more Ready Link users
(up to 6 on a group call) (page 150).
Voice SMS Messaging allows you to send voice messages
to others using an email address or mobile phone number
Missed events are displayed on-screen in standby mode
ⅷ
ⅷ
Sprint PCS VisionSM provides access to the wireless
Sprint PCS Mail and SMS Text Messaging provide quick
and convenient messaging capabilities (page 205 and
page 187, respectively).
ⅷ
ⅷ
Sprint PCS Voice CommandSM lets you dial phone numbers
by speaking someone’s name or the digits of their phone
Games, ringers, screen savers, and other applications can
be downloaded to make your Sprint PCS Phone as unique
21
ⅷ
ⅷ
The contact list allows you to store up to 300 phone
numbers or email addresses (page 109).
The built-in Scheduler offers several personal information
management features to help you manage your busy
lifestyle (page 121).
ⅷ
Your Sprint PCS Phone is equipped with a Location feature
for use in connection with location-based services that
may be available in the future (page 58).
ⅷ
ⅷ
Features a large color screen.
Speed dial lets you dial phone numbers with one or two
22
Turning Your Phone On and Off
Turning Your Phone On
To turn your phone on:
ᮣ
Flip the phone open, then press and release
.
Once your phone is on, it may display “Looking for Service,”
which indicates that your phone is searching for a signal.
When your phone finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for Sprint PCS Service by pressing any key (when your
phone is turned on).
The Power Save feature helps to conserve your battery power
when you are in an area where there is no signal.
Note:
Turning Your Phone Off
To turn your phone off:
ᮣ
Press and hold
until you see the powering off
animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
23
Using Your Phone’s Battery and Charger
Battery Capacity
Your Sprint PCS Phone is equipped with a Lithium Ion
(Li-Ion) battery. The standard battery provides up to 3.0 hours
of continuous digital talk time and the extended battery
provides up to 4.1 hours of continuous digital talk time.
When the battery reaches 5% of its capacity, the battery icon
blinks. When there are approximately two minutes of talk
time left, the phone sounds an audible alert and then powers
down.
Long backlight settings, searching for service, vibrate mode,
and browser use affect the battery talk and standby times.
Note:
Tip:
Be sure to watch your phone’s battery level indicator and
charge the battery before it runs out of power.
Installing the Battery
To install the Li-Ion battery:
1. To install, insert the battery into the bottom of the
phone at a 45-degree angle, making sure to line up the
tabs.
2. Gently press down the top of the battery until it snaps
into place.
24
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any
stored numbers or messages.
2. Push the release button up located at the top of the
battery.
3. Pull the battery away and remove from the phone at a
45-degree angle.
Charging the Battery
Your Sprint PCS Phone’s Li-Ion battery is rechargeable and
should be charged as soon as possible so you can begin using
your phone.
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your phone automatically
turns off and you will lose all the information you were just
working on. For a quick check of your phone’s battery level,
glance at the battery charge indicator located in the upper-
right corner of your phone’s display screen. If the battery
charge is getting too low, the battery icon
phone sounds a warning tone.
blinks and the
Always use a Sprint-approved battery charger, travel charger,
or vehicle power adapter to charge your battery.
Using the wrong battery charger could cause damage to
your phone and void the warranty.
Warning!
25
Using the Charger
To use the travel charger provided with your phone:
ᮣ
Plug the round end of the AC adapter into the phone’s
power interface connector and the other end into an
electrical outlet.
Ⅲ
A red indicator light on the phone lets you know the
battery is charging.
Ⅲ
An green indicator light on the phone lets you know
that the battery is charged.
It takes approximately 4 hours to fully recharge a completely
rundown battery. With the Sprint-approved
Li-Ion battery, you can recharge the battery before it becomes
completely run down.
26
Displaying Your Phone Number
Just in case you forget your phone number, your Sprint PCS
Phone can remind you.
To display your phone number:
ᮣ
Press Menu (
) to access the main menu, select
), Phone Info ( ), and Phone Number
Settings (
(
). (Your phone number and other information
about your phone and account will be displayed.)
27
Making and Answering Calls
Making Calls
Placing a call from your Sprint PCS Phone is as easy as making
a call from any land line phone. Just enter the number and
press
, and you’re on your way to clear calls.
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while
dialing, press
and hold
to erase one digit at a time. Press
to erase the entire number.)
3. Press
Call Guard is enabled, press
“Call Guard” on page 83.)
. (To make a call when you are roaming and
and then . See
4. Press
or close the phone when you are finished.
You can also place calls from your Sprint PCS Phone by using
Sprint PCS Voice CommandSM (page 221), Speed Dialing
Dialing Options
When you enter numbers in standby mode, a number of
options are available to you. Press Options ( ) to perform
the following actions:
ⅷ
Dial: dials the number or digits displayed.
ⅷ
Send Msg: allows you to send a text or voice SMS message
with attachments to the number being dialed.
28
ⅷ
Save: Enter a seven to ten digit number (phone number
and area code) and press to save the phone number
in your Contacts. (See “Saving a Phone Number” on
ⅷ
Find: Enter one or more digits and press
(Options).
Select Find to display contact entries that end with the
ⅷ
ⅷ
Hard Pause: allows you to enter a hard pause. To continue
dialing, you must press a key. (See “Dialing and Saving
2sec Pause: allows you to enter a 2 second pause. The
phone will pause, then continue dialing without any
additional keys being pressed. (See “Dialing and Saving
Answering Calls
To answer an incoming call with the flip open:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press
or
to answer an incoming call.
Depending on your phone’s settings, you may also
answer incoming calls by opening the flip or by pressing
any number key. (See “Call Answer Mode” on page 66
for more information.)
29
To answer an incoming call with the flip closed:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. When your phone rings or vibrates, press and hold the
speaker phone key (
) on the right side of the
phone. (The call will be answered in speaker phone
mode.)
– or –
Open the phone to use the earpiece.
Your Sprint PCS Phone notifies you of incoming calls in the
following ways:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
The phone rings and vibrates.
The phone just vibrates.
The indicator light flashes.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts,
the entry’s name and number are displayed on both the
inside and outside LCD screens.
If Call Answer is set to Talk Key, the following options are also
displayed. To select an option, press the corresponding
softkey button.
ⅷ
Answer to answer the incoming call.
ⅷ
Ignore to send the call to your voicemail box.
30
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your roaming
charges when making or receiving calls while outside the
Nationwide Sprint PCS Network. Please see Controlling Your
Roaming Experience on page 79 for more information about
roaming.
To answer a call when you are roaming and Call Guard is enabled:
ᮣ
Select Answer or press
to answer the call and press
to confirm the roaming rate. (See “Call Guard” on
page 83 for additional information.)
When your phone is off, incoming calls go directly to
voicemail.
Note:
Ending a Call
To disconnect a call when you are finished:
ᮣ
Close the flip or press
.
31
Missed Call Notification
When an incoming call is not answered, the Missed Call log is
displayed on your screen.
To display the Missed Call entry from the notification screen:
ᮣ
Highlight the entry and press
number, press .)
To display a Missed Call entry from standby mode:
1. Press for Menu.
. (To dial the phone
2. Select Call History (
).
3. Select Missed Calls (
).
4. Highlight the entry you wish to view and press
.
Calling Emergency Numbers
You can place calls to 911 (dial
), even if
your phone is locked or your account is restricted.
Once you place an emergency call, your phone will enter
Emergency mode and you will be unable to make any non-
emergency calls until you exit.
To exit emergency mode:
ᮣ
Press
and
at the same time and release to exit
emergency mode.
– or –
Remove and replace the battery.
32
In-Call Options
Pressing Options ( ) during a call displays a list of features
you may use during the course of a call. To select an option,
press the corresponding keypad number or highlight the
option and press
. The following options are available
through the Options menu:
ⅷ
(1) Call History checks your call log for Outgoing, Incoming,
and Missed calls. You can also erase the history from this
menu.
ⅷ
ⅷ
(2) Contacts accesses the Contacts menu.
(3) 3-Way Call allows you to talk to two different people at
the same time. (For more information, see “Making a
ⅷ
ⅷ
(4) Messaging allows you to check for voicemail, email,
and notifications.
(5) Voice Memo allows you to record incoming audio from
your conversation. (For more information, see “To record a
ⅷ
ⅷ
(6) Tools accesses the Tools menu options.
(7) Phone Info displays the following menu:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
(1) Phone Number
(2) Icon Glossary
(3) Version
(4) Advanced
During a call, the left softkey button functions as the Mute
button. Press it to mute the phone’s microphone for privacy.
Press it again to Unmute the phone.
33
End-of-Call Options
After receiving a call from or making a call to a phone number
that is not in your Contacts, the phone number and the
duration of the call are displayed. The left softkey displays the
Save option. Select this option if you wish to add the new
number to your Contacts. (See “Saving a Phone Number” on
After receiving a call from or making a call to a phone number
that is already in your Contacts, the Contacts entry name and
phone number and the duration of the call are displayed. The
left softkey displays the option Call. Select this option if you
wish to call the number again.
The End-of-Call options are not displayed for calls identified
as No ID or Restricted.
Note:
Saving a Phone Number
Your Sprint PCS Phone can store up to 300 Contact entries.
Each entry’s name can contain 20 characters. Your phone
automatically sorts the Contacts entries alphabetically. (For
more information, see “Using Contacts” on page 109.)
To save a number from standby mode:
1. Enter a phone number and press
2. Select New Entry or Existing Entry and press
3. Use your navigation key to select a label (Mobile, Home,
Work, Pager, or Others) and press
4. Enter a name for the entry using the numeric keys.
Press to select the desired entry method T9 (English),
.
.
.
34
5. When finished entering the name, press
to return
to the contact entry.
6. Press
for Done to save the entry.
Finding a Phone Number
You can search Contacts entries for phone numbers that end
in a specific string of numbers.
To find a phone number:
1. While in standby mode, enter one or more of the last
digits of the phone number. (The more numbers you
enter, the more specific the search becomes.)
2. Press
for Options and select Find. (All Contacts
entries matching the entered numbers will display.)
3. To display the Contacts entry that ends in the numbers
you entered, highlight the entry and press
. To dial
the number, highlight it and press
.
35
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing
numbers.
There are two types of pauses available on your phone:
ⅷ
Hard Pause sends the next set of numbers when you
press
.
ⅷ
2sec Pause automatically sends the next set of numbers
after two seconds.
You can have multiple pauses in a phone number and
combine 2-second and hard pauses.
Note:
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Select Options ( ) and choose either Hard Pause or
2sec Pause.
3. Enter additional numbers.
4. Press
to dial the number.
– or –
Press
to save the number in your Contacts.
When dialing a number with a hard pause, press Talk to send
the next set of numbers.
Note
36
Abbreviated Dialing
Abbreviated dialing allows you to program a five or six-digit
prefix for commonly used phone numbers. When abbreviated
dialing is on, you can enter the last four or five digits of any
phone number that matches the five or six digit prefix, and
the number is dialed.
To set up abbreviated dialing:
1. Press
for Menu.
).
2. Select Settings (
3. Press
for Others.
4. Press
for Abbrev. Dial.
5. Press the navigation key up or down to select On or Off
and press
6. Input the five or six digit prefix (for example, area code
and prefix) and press to Save.
.
Making an Abbreviated Dial Call
To make a call:
1. Enter the last four or five digits of the prefix phone
number.
2. Abbrev. Dial is displayed in the lower left corner with the
prefix digits displayed.
If there is more than one Contact entry that matches the last
four or five digits, a list is displayed which allows you to select
the desired number to call.
Note
3. Press
to begin the call.
37
Dialing From Contacts
To dial directly from a Contacts entry:
1. Press
for Contacts.
2. Enter the first few letters of the Contact name using the
numeric keypad. The matching contact is automatically
highlighted.
3. Press
to make the call.
If the desired entry contains more than one phone number,
scroll left or right to display the icon for the number you wish
to call and press TALK to make the call.
Note
Using One-Touch/Two-Touch Speed Dialing
You can store up to ninety-nine numbers in your phone’s
speed dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you can
dial Speed Dial entries using one key press for locations 2-9 or
two key presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
ᮣ
Press and hold the appropriate key for approximately
two seconds. The display confirms that the number has
been dialed when it shows the time and counter above
the name and number of the contact entry.
38
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two
seconds. The display confirms that the number has been
dialed when it shows the time and counter above the
name and number of the contact entry.
Speed dialing is not available when you are roaming; when
you are roaming off the Nationwide Sprint PCS Network, you
must always dial using eleven digits (1 + area code + number).
Note:
Speed dialing entries are assigned by pressing Menu, 9, 4.
Tip:
Using Plus (+) Code Dialing
When placing calls from the United States to other countries,
you can use Plus Code Dialing to automatically enter the
international access code (011).
To make a call using Plus Code Dialing:
1. Press and hold
until a “+” sign displays on your
phone.
2. Dial the country code and phone number you’re calling
and press . (The access code for international dialing
will automatically be dialed, followed by the country
code and the phone number you entered.)
39
Entering Text
Selecting a Character Input Mode
Your Sprint PCS Phone provides convenient ways to enter
words, letters, punctuation, and numbers whenever you are
prompted to enter text (for example, when adding a
Contact entry or when using Sprint PCS Mail and SMS
Text Messaging).
To change the character input mode:
1. When you are prompted to enter text, press
to
change the character input mode.
2. Select one of the following options:
Ⅲ
T9 (English) to enter characters using predictive T9
Ⅲ
Alpha to enter characters by tapping the keypad (see
Ⅲ
Ⅲ
Number to enter numbers by pressing the numbers
on the keypad (see page 43).
Ⅲ
Ⅲ
Ⅲ
Preset Msg to enter pre-programmed messages (see
Recent Msg to select text from a list of recent
When entering text, press the * (Shift) key to change letter
capitalization (Abc>ABC > abc).
Tip:
40
Entering Characters Using T9 Text Input
T9 Text Input lets you enter text in your Sprint PCS Phone by
pressing keys just once per letter. (To select the T9 [English]
mode when entering text, see “Selecting a Character Input
T9 Text Input analyzes the letters you enter using an intuitive
word database and creates a suitable word. (The word may
change as you type.) If the word you want does not display
after you have entered all the letters, press
to scroll
through additional word selections. To accept a word and
insert a space, press
.
If you make a mistake, press
to erase a single character.
to delete an entire entry.
Press and hold
To enter text using T9:
1. From the text entry screen (for example, a new event in
scheduler), press and select T9 (English).
2. Use your keypad to enter the new event. (For example,
to enter “Meeting”, press once, twice,
once, once, once, and once.)
41
Entering Characters by Tapping the Keypad
To enter characters by tapping the keypad:
2. Press the corresponding keys repeatedly until the
desired letter appears (for example, to enter the word
“Bill,” press
twice,
three times,
three
times, press
to advance the cursor or wait for it to
advance automatically, then press
again). (If you make a mistake, press
single character. Press and hold
three times
to erase a
to erase all text.)
By default, the first letter of an entry is capitalized and the
following letters are lowercase. After a character is entered,
the cursor automatically advances to the next space after two
seconds or when you enter a character on a different key.
Characters scroll in the following order:
. ,@ 1 ?! * # /
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
0
Space
Shift
42
Entering Numbers, Symbols, Emoticons, Preset
Messages and Recent Messages
To enter numbers:
ᮣ
Select the Number mode and press the appropriate key.
To enter symbols:
ᮣ
appropriate key indicated on the display.
To enter emoticons:
Select the Emoticons mode and press the appropriate
ᮣ
key. You may scroll through more options by pressing
the navigation key left or right. (See “Selecting a
To enter preset messages:
2. Scroll to the desired pre-programmed message and
press
.
Preset messages make composing text messages even easier
by allowing you to enter common messages, such as Meet
me at, Let’s get lunch, or a customized preset message of your
own. (For more information on Preset messages, please see
Note:
To enter recent messages:
2. Scroll to the desired message and press
.
43
44
Section 2B
Controlling Your Phone’s Settings
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Using the menu options available on your Sprint PCS Phone,
you can customize your phone to sound, look, and operate
just the way you want it to. This section describes how you
can change your phone’s settings to best suit your needs.
Take a few moments to review these options and to adjust or
add settings that are right for you.
45
Sound Settings
Ringer Types
Ringer types help you identify incoming calls and messages.
You can assign ringer types to individual contact entries,
types of calls, Scheduler entries, and types of messages.
ⅷ
Single Tones are non-polyphonic traditional style ring
tones.
ⅷ
ⅷ
ⅷ
Ring Tones include a variety of standard ringer types.
Melodies include a variety of standard musical melodies.
Downloaded includes ringers you have purchased and
downloaded to your phone. (See “Downloading Premium
Selecting Ringer Types for Voice Calls
Your Sprint PCS Phone provides a variety of ringer options
that allow you to customize your ring and volume settings.
These options allow you to identify incoming calls by the ring.
To select a ringer type for voice calls:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
5. Select Voice Calls (
6. Select With Caller ID (
).
).
) or No Caller ID (
).
7. Press the navigation key left or right to select the
desired ringer category.
46
8. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
9. When the desired ringer is selected, press
.
Selecting Ringer Types for Ready Link
To select a ringer type for ready link:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
).
5. Select Ready Link (
6. Press the navigation key up or down to select the
desired ringer.
7. When the desired ringer is selected, press
for Save.
Selecting Ringer Types for Messages
To select a ringer type for messages:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
5. Select Messages (
).
6. Select Voicemail (
) or Text Message (
).
7. Press the navigation key left or right to select the
desired ringer category.
47
8. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
9. When the desired ringer is selected, press
.
Selecting Ringer Types for Schedule
To select a ringer type for schedule reminders:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Ringer Type (
).
5. Select Schedule (
).
6. Press the navigation key left or right to select the
desired ringer category.
7. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
8. When the desired ringer is selected, press
.
48
Selecting a Roam Ringer
To select a ringer type for roaming calls:
1. Press Menu (
) to access the main menu.
).
).
2. Select Settings (
3. Select Sounds (
4. Select Ringer Type (
).
).
6. Press the navigation key up or down to select Normal or
5. Select Roam Ringer (
Distinctive and press
.
Selecting a Key Tone
Your phone offers a number of options for selecting the type
and length of audible tones accompanying a key press.
(Longer tone lengths may be better for tone recognition
when dialing voicemail or other automated systems.)
To select a tone type:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Key Tone (
).
).
5. Select Tone Type (
6. Select Normal, Piano, or Beep and press
.
49
To select a tone level:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Key Tone (
).
).
5. Select Tone Level (
6. Press the volume key up or down to select the desired
level and press
.
To select a key tone length:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Tone Length (
).
5. Select Short or Long and press
.
Adjusting the Phone’s Volume Settings
You can adjust your phone’s volume settings to suit your
needs and your environment.
To adjust your phone’s volume settings:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Volume (
).
50
5. Select Ringer (
), Alarms (
Ready Link (
), Messages (
), or Voice Mail
(
), App. Volume (
), or
).
6. Select Use Ringer Vol. or Separate Vol. if necessary. Press
the navigation key left or right to choose a desired
volume level. Press
to check the Always Vibrate
option to set your handset to vibrate + ringer mode.
With the phone open, you can adjust the ringer volume in
standby mode (or the earpiece volume during a call) by using
the volume key on the left side of your phone.
Tip:
7. Select Done ( ) to save and exit.
Alert Notification
Your Sprint PCS Phone can alert you with an audible tone
when you change service areas, once a minute during a voice
call, or when a call has been connected.
To enable or disable alert sounds:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select Alerts (
).
5. Select Minute Beep (
), Service (
), Power On/Off (
).
), Connect (
),
Sig. Fade Tone (
), or
R-Link Missed (
6. Select On, Off, Once, Repeat, or Continuous and
press
.
51
Silence All
There may be times when you need to silence your phone
entirely. The phone’s Silence All option allows you to mute all
sounds without turning your phone off.
To activate Silence All:
ᮣ
With the phone open, press and hold the volume key
down in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
ᮣ
Press the volume key up repeatedly to select a desired
volume level.
Text To Speech (TTS)
The Text To Speech option allows you to hear the menu
options spoken aloud using an electronic voice when you are
navigating through the user interface.
To enable TTS:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Sounds (
4. Select TTS (
).
5. Select TTS Mode (
).
6. Press the navigation key up or down to select Enable and
press
.
52
Display Settings
Changing the Text Greeting
The text greeting can be up to fourteen characters and is
displayed on your phone’s screen in standby mode. You may
choose to keep the phone’s default greeting (“Sprint PCS”), or
you may enter your own custom greeting.
To display or change your greeting:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Display (
4. Select Greeting (
).
).
).
5. Select Custom and press
6. Enter a custom greeting using your keypad and
existing greeting one character at a time, press . To
erase the entire greeting, press and hold .)
.
54
Changing the Backlight Time Length
The backlight setting lets you select how long the display
screen and keypad are lit after any key press is made.
To change the backlight setting:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Display (
4. Select Backlight (
).
).
).
5. Select Main Display (
), Keypad (
), or
Pwr Save Mode (
).
6. Select a time setting or on/off and press
.
Long backlight settings affect the battery’s talk and standby
times.
Note:
Changing the Screen Saver
Your new Sprint PCS Phone offers options for what you see on
the display screen while in standby mode.
To change the display images:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Display (
).
).
4. Select Screen Saver (
5. Select Main LCD (
).
).
6. Select Preset Image (
) or Downloads (
).
55
7. Use the navigation key to view the available screen
savers.
If Preset Image is selected, there may also be an additional
step required to place a digital clock as an overlay. The clock
can also be turned off so that just the desired image is
displayed as the screen saver.
Note:
8. Press
to select the desired screen saver.
Dialing Font
Your Sprint PCS Phone allows you to choose the color and size
of the text displayed when dialing.
Color
The available color options are:
ⅷ
Basic: displays black numbers on-screen when dialing.
ⅷ
Rainbow: displays multi-colored numbers on-screen when
dialing.
ⅷ
ⅷ
Monochrome: allows you to choose between several
different monochromatic color options.
Hyphenate: allows you to choose between several
different monochromatic colors and assign a different
color option to each individual hyphenated series of
numbers.
To change the dialing color:
1. Press Menu (
) to access the main menu.
).
).
2. Select Settings (
3. Select Display (
4. Select Dialing Font (
).
5. Select Color (
).
56
6. Select Basic, Rainbow, Monochrome, or Hyphenate and
press
.
7. If you selected Monochrome, use your navigation key to
select a color. If you selected Hyphenate, use your
navigation key to select a color for the first group of
numbers, then press Next ( ) and select a color for the
next two sets of numbers.
8. Select Done ( ).
Font Size
The available size options are:
ⅷ
Large: displays larger text for easier viewing on the display
screen.
ⅷ
Normal: displays the standard smaller size text on the
display screen.
To change the dialing font size:
1. Press Menu (
) to access the main menu.
).
).
2. Select Settings (
3. Select Display (
4. Select Dialing Font (
).
5. Select Size (
6. Press the navigation key up or down to select Large or
Normal and press
).
.
57
Location Settings
Your Sprint PCS Phone is equipped with a Location feature for
use in connection with location-based services that may be
available in the future.
The Location feature allows the network to detect your
position. Turning Location off will hide your location from
everyone except 911.
To enable your phone’s Location feature:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Others (
4. Select Location (
).
).
). (The Location disclaimer displays.)
5. Read the disclaimer and press
or select Next ( ).
6. Select On or Off and press
.
When the Location feature is on, your phone’s standby screen
will display the
icon will display.
icon. When Location is turned off, the
58
Messaging Settings
Staying connected to your friends and family has never been
easier. With your phone’s advanced messaging capabilities,
you can send and receive many different kinds of text
messages without placing a voice call. (For more information,
Your phone’s messaging settings make text messaging even
faster and easier by letting you decide how you would like to
be notified of new messages, create a signature with each
sent message, and create your own canned messages, to
name just a few.
Setting Message Alerts
When new messages arrive, you can choose to have your
phone notify you by playing an audible alert.
To hear an alert when you receive a new message:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Message Alerts (
5. Select Type ( ).
6. Select Voicemail (
).
) or Text Message (
).
7. Select Single Tones, Ring Tones, Melodies, or Downloaded
and press the navigation key down.
8. Press the navigation key left or right to select the
desired sound and press
.
59
Deleting Old Messages
You can have old messages deleted automatically when your
inbox becomes full.
1. Press Menu (
) to access the main menu.
2. Select Messaging (
3. Select Settings (
4. Select Auto Erase (
).
).
).
5. Select Yes or No and press
.
Adding a Customized Signature
Each message you send can have a customized signature to
reflect your personality.
To add a customized signature to each sent message:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Edit Signature (
).
5. Select On and press
.
If you do not wish to attach a signature to your outgoing
messages, select Off.
Note:
6. Enter your signature using the keypad and press
for
60
Managing Preset Messages
Your phone is preset with ten messages and ten empty
spaces for custom messages to help make sending text
messages faster and easier. These messages, such as
“Where are you?,” “Let’s get lunch,” and “Meet me at,”
can be customized or deleted to suit your needs. You can
even add your own preset messages to the list.
To edit or delete a preset message:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Preset Messages (
). (The list of messages
is displayed.)
5. To edit or delete a preset message, highlight it and press
Edit ( ).
61
Airplane Mode
Airplane Mode allows you to use many of your phone’s
features, such as Games, Memo Pad, Voice Memos, etc., when
you are in an airplane or in any other area where making or
receiving calls or data is prohibited. When your phone is in
Airplane Mode, it cannot send or receive any calls or access
online information.
To set your phone to Airplane Mode:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Others (
4. Select Airplane Mode (
).
5. Read the disclaimer and press
or select OK ( ).
6. Select On or Off and press OK ( ).
While in Airplane Mode, your phone’s standby screen will
display “Phone Off.”
63
TTY Use With Sprint PCS Service
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf,
hard of hearing, or who have speech or language disabilities,
to communicate by telephone.
Your phone is compatible with select TTY devices. Please
check with the manufacturer of your TTY device to ensure
that it supports digital wireless transmission. Your phone and
TTY device will connect via a special cable that plugs into your
phone's headset jack. If this cable was not provided with your
TTY device, contact your TTY device manufacturer to purchase
the connector cable.
When establishing your Sprint PCS Service, please call
Sprint Customer Service via the state Telecommunications
Relay Service (TRS) by first dialing
,
.
Then provide the state TRS with this number: 866-727-4889.
To turn TTY Mode on or off:
1. Press Menu (
2. Select Settings (
3. Select Others (
) to access the main menu.
).
).
4. Highlight TTY Mode and press
.
A message is displayed when you enable TTY that says “TTY
“On” may impair headset and non-TTY accessory
performance.” Press the OK key to continue.
Note:
5. Press
after reading the message to continue.
64
6. Press the navigation key up or down to select
Disable TTY, TTY+Hearing, TTY+Voice, or Enable TTY and
press
.
In TTY Mode, your phone will display the TTY access icon.
Note:
If TTY mode is enabled, the audio quality of non-TTY
devices connected to the headset jack may be impaired.
911 Emergency Calling
IMPORTANT
NOTICE:
Sprint recommends that TTY users make emergency
calls by other means, including Telecommunications
Relay Services (TRS), analog cellular, and land line
communications. Wireless TTY calls to 911 may be
corrupted when received by public safety answering
points (PSAPs) rendering some communications
unintelligible. The problem encountered appears
related to TTY equipment or software used by PSAPs.
This matter has been brought to the attention of the
FCC, and the wireless industry and PSAP community
are currently working to resolve this.
65
Phone Setup Options
Launch Pad
Your phone offers you the option of assigning a shortcut key
to a favorite or often-used function. Pressing one of the
navigation keys in standby mode will launch your personally
designated shortcut.
To assign your shortcut key:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Launch Pad (
4. Select the Up, Down, Left or Right Key, and press
5. Use the navigation key to select the desired shortcut
you would like to assign and press
).
.
.
Call Answer Mode
You can determine how to answer incoming calls on your
phone, whether you want to be required to press
press any number key, or simply open the flip.
, to
To set call answer mode:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Others (
4. Select Call Answer (
).
66
5. To select an option, highlight it and press
.
Ⅲ
Any key to allow an incoming call to be answered by
pressing any key.
Ⅲ
Ⅲ
Talk key requires
to be pressed to answer all
incoming calls.
Flip open allows you to answer incoming calls by
opening the flip.
Auto Answer Mode
You may set your phone to automatically pick up incoming
calls when connected to an optional hands-free car kit or
headset.
To set Auto Answer mode:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Others (
4. Select Auto Answer (
).
5. To select an option, highlight it and press
.
Ⅲ
Ⅲ
No to disable Auto Answer.
Yes to answer calls automatically when the phone is
connected to a hands-free car kit or a headset (sold
separately). Remember, your phone will answer calls
in Auto Answer mode even if you are not present.
67
Display Language
You can choose to display your Sprint PCS Phone’s on-screen
menus in English or in Spanish.
To assign a language for the phone’s display:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Others (
4. Select Language (
).
5. Select English or Español and press
.
68
Section 2C
Setting Your Phone’s Security
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ By using the security settings on your Sprint PCS Phone, you
receive peace of mind without sacrificing flexibility. This
section will familiarize you with your phone’s security
settings. With several options available, you can customize
your phone to meet your personal needs.
69
Accessing the Security Menu
All of your phone’s security settings are available through the
Security menu. You must enter your lock code to view the
Security menu.
To access the Security menu:
1. Press Menu (
) to access the main menu.
2. Select Settings (
).
).
3. Select Security (
4. Enter your lock code to display the Security menu.
If you can’t recall your lock code, try using the last four digits
of either your Social Security number or Sprint PCS Phone
number or try 0000 or NATL (6285). If none of these work, call
Sprint Customer Service at 1-888-211-4PCS (4727).
Tip:
70
Using Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive incoming
calls or make calls to 911, Sprint Customer Service, or special
To lock your phone:
1. From the Security menu, select Lock Phone (
2. Highlight Unlocked, On power-up, or Lock now and
press
).
.
Unlocking Your Phone
To unlock your phone:
1. From standby mode, press
.
2. Enter your lock code.
Changing the Lock Code
To change your lock code:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
).
4. Enter your lock code. (The Security menu is displayed.)
5. Select Change Lock ( ).
6. Enter your new lock code and press Next ( ).
7. Re-enter your new lock code press Done ( ).
71
Calling in Lock Mode
You can place calls to 911 and to your special numbers when
in lock mode. (For information on special numbers, see “Using
To place an outgoing call in lock mode:
ᮣ
To call an emergency number, special number, or
Sprint Customer Service, enter the phone number and
press
.
Locking Services
This setting allows you to lock voice call functions, Sprint PCS
Vision services, and Sprint PCS Ready Link service. When you
enable Lock Services, you are unable to make new calls
(excluding emergency numbers) or access the Sprint PCS
Vision or Sprint PCS Ready Link services until the lock has been
disabled in the Security menu.
Locking Voice Services
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Lock Services (
).
5. Select Voice: Unlocked (
).
6. Select Lock and press
.
72
Locking Sprint PCS Vision
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Lock Services (
).
5. Select PCS Vision: Unlocked (
).
6. Select Lock and press
.
Locking Ready Link
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Lock Services (
5. Select Ready Link: Unlocked (
6. Select Lock and press
).
).
.
73
Using Special Numbers
Special numbers are important numbers that you have
designated as being “always available.” You can call and
receive calls from special numbers even if your phone is
locked. You can save up to three special numbers in addition
to your contact entries (the same number may be in both
directories).
To add or replace a special number:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
4. Select Special # (
).
) and enter your lock code.
).
5. Highlight the desired location for your entry and
press
6. Enter the number and press
.
.
There are no Speed Dial options associated with special
numbers.
Note:
74
Erasing Contacts
You can quickly and easily erase all of your Contacts.
To erase all the names and phone numbers in your Contacts:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Erase Contacts (
5. If you are certain you would like to erase all of your
internal Contacts entries, select Yes and press
).
.
Erasing Downloads
You can use your phone’s security menu to erase all items you
have downloaded to your phone.
To erase all downloads:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Erase Downloads (
5. If you are certain that you would like to erase all items
downloaded to your phone, select Yes and press
).
.
This will also delete any content originally preloaded into the
handset.
Note:
75
Resetting Your Phone
Resetting the phone restores all the factory defaults,
including the ringer types and display settings. (Contacts are
not erased.)
To reset your phone:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Security (
).
) and enter your lock code.
4. Select Reset Phone (
5. If you are certain that you would like to restore all of the
factory settings, select Yes and press
).
.
76
Security Features for Sprint PCS VisionSM
Enabling and Disabling Sprint PCS Vision Services
You can disable Sprint PCS Vision services without turning
off your phone; however, you will not have access to any
Sprint PCS Vision services, including Web and messaging.
Disabling Sprint PCS Vision will avoid any charges associated
with Sprint PCS Vision services. While signed out, you can still
place or receive phone calls, check voicemail, and use other
voice services. You may enable Sprint PCS Vision services
again at any time.
To disable Sprint PCS Vision services:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select PCS Vision (
).
).
4. Select Disable Vision (
). (A message will appear.)
5. Read the disclaimer and press Next ( ).
6. Select Disable Vision and press
.
To enable Sprint PCS Vision services:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select PCS Vision (
).
).
4. Select Enable Vision (
). (A message will appear.)
.
5. Select Connect and press
6. Select Yes to enable Vision service and press
.
77
78
Section 2D
Controlling Your Roaming Experience
In This Section
ࡗ ࡗ ࡗ Roaming is the ability to make or receive calls when you’re
off the Nationwide Sprint PCS Network. Your new
Sprint PCS VisionSM Phone VI-A820 by Samsung works
anywhere on the Nationwide Sprint PCS Network and allows
you to roam on other 1900 and 800 MHz digital networks
where we've implemented roaming agreements with other
carriers.
This section explains how roaming works as well as special
features that let you manage your roaming experience.
79
Understanding Roaming
Recognizing the Roaming Icon on the Display Screen
Your phone’s display screen always lets you know when
you’re off the Nationwide Sprint PCS Network. Any time you
are roaming, the phone displays the roaming icon (
).
Remember, when you are using your phone off the
Nationwide Sprint PCS Network, always dial numbers using
11 digits (1 + area code + number).
Tip:
Unless your Sprint PCS Service Plan includes roaming, you will
pay a higher per-minute rate for roaming calls.
Note:
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call quality
and security will be similar to the quality you receive when
making calls on the Nationwide Sprint PCS Network.
However, you may not be able to access certain features, such
as Sprint PCS Vision.
If you’re on a call when you leave the Nationwide Sprint PCS
Network and enter an area where roaming is available, your
call is dropped. If your call is dropped in an area where you
think Sprint PCS Service is available, turn your phone off and
on again to reconnect to the Nationwide Sprint PCS Network.
Note:
80
Checking for Voicemail Messages While Roaming
When you are roaming off the Nationwide Sprint PCS
Network, you may not receive on-phone notification of new
voicemail messages. Callers can still leave messages, but you
will need to periodically check your voicemail for new
messages if you are in a roaming service area for an extended
period of time.
To check your voicemail while roaming:
1. Dial 1 + area code + your Sprint PCS Phone number.
2. When you hear your voicemail greeting, press
.
3. Enter your pass code at the prompt and follow the voice
prompts.
When you return to the Nationwide Sprint PCS Network,
voicemail notification will resume as normal.
81
Setting Your Phone’s Roam Mode
Your Sprint PCS Phone allows you to control your roaming
capabilities. By using the Roaming menu option, you can
determine which signals your phone accepts.
Set Mode
Choose from three different settings on your dual-band
phone to control your roaming experience.
To set your phone’s roam mode:
1. Press Menu (
) to access the main menu.
2. Select Settings (
3. Select Roaming (
4. Select Set Mode (
).
).
).
5. To select an option, highlight it and press
.
Ⅲ
Ⅲ
Ⅲ
Automatic seeks Sprint PCS Service. When
Sprint PCS Service is unavailable, the phone
searches for an alternate system.
Roaming only forces the phone to seek a roaming
system. The previous setting (Sprint or Automatic) is
restored the next time the phone is turned on.
Sprint allows you to access the Nationwide
Sprint PCS Network only and prevents roaming on
other networks.
82
Controlling Roaming Charges Using
Call Guard
Your phone has two ways of alerting you when you are
roaming off the Nationwide Sprint PCS Network: the
on-screen roaming icon and Call Guard. Call Guard makes it
easy to manage your roaming charges by requiring an extra
step before you can place or answer a roaming call. (This
additional step is not required when you make or receive calls
while on the Nationwide Sprint PCS Network.)
To turn Call Guard on or off:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Roaming (
).
).
4. Select Call Guard (
5. After reading the message, highlight On or Off and
press
.
Voice Dialing and Speed Dialing are not available when you
are roaming with Call Guard enabled.
Note:
83
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit
number and press
.
2. Press to confirm Roaming Rate.
To answer incoming roaming calls with Call Guard on:
1. Press
2. Press
to confirm Roaming Rate.
If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.
Reminder:
84
Section 2E
Navigating Through Menus
In This Section
ࡗ ࡗ ࡗ Every function and feature of your Sprint PCS Phone can be
accessed through an on-screen menu. This section is a road
map to using your Sprint PCS VisionSM Phone VI-A820 by
Samsung. Please take a few moments to learn your way
around and you’ll find your phone easier to use.
85
Menu Navigation
The navigation key on your Sprint PCS Phone allows you to
scroll through menus quickly and easily. The scroll bar at the
right of the menu keeps track of your position in the menu at
all times.
To navigate through a menu, simply press the navigation key
up or down. If you are in a first-level menu, such as Settings,
you may also navigate to the next or previous first-level menu
by pressing the navigation key right or left.
Menu Structure
Selecting Menu Items
As you navigate through the menu, menu options are
highlighted. Select any numbered option by simply pressing
the corresponding number on the phone’s keypad. You may
also select any item by highlighting it and pressing
For example, if you want to view your last incoming call:
1. Press Menu ( ) to access the main menu.
2. Select Call History by pressing
and pressing
3. Select Incoming Calls by pressing
it and pressing
are displayed on the screen.)
.
or by highlighting it
or by highlighting
.
. (If you have received any calls, they
86
Backing Up Within a Menu
To go to the previous menu:
ᮣ
Press
.
To return to standby mode:
ᮣ
Press
.
Viewing the Menus
Menu Diagram
Voice Memo
1: Record
2: Review
Messaging
1: Send Message
1: Text Message
2: VoiceSMS
3: Email
2: Text Message
1: Inbox
2: Outbox
3: Drafts
3: VoiceSMS
4: Email
5: Voicemail
1: Call Voicemail
2: Details
3: Clear Envelope
6: Settings
1: Notification
1: Message and Icon
2: Icon only
87
2: Sending Options
1: Priority
1: Normal
2: Urgent
2: Call Back #
1: None
2: Phone Number (xxx-xxx-xxxx)
3: Other
3: Preset Messages
1: Can’t talk right now. Send me a message.
2: Call me
3: Where are you?
4: Can you pick up
5: Meet me at
6: Let’s get lunch.
7: The meeting has been cancelled.
8: I’ll be there at
9: What time does it start?
10: I love you!
11: [Empty]
12: [Empty]
13: [Empty]
14: [Empty]
15: [Empty]
16: [Empty]
17: [Empty]
18: [Empty]
19: [Empty]
20: [Empty]
4: Edit Signature (On/Off)
5: Message Alerts
1: Volume
1: Voicemail
2: Text Message
2: Type
88
1: Voicemail
2: Text Message
3: Reminder
1: Off
2: Once
3: Every 2 min
6: Save In Outbox (Yes/No)
7: Auto Erase (Yes/No)
8: VoiceSMS Options
1: Speaker Phone (On/Off)
2: From Name
Tools
1: Today
2: Scheduler
3: Task List
4: Memo Pad
5: World Time
1: DST Setting
6: Alarm Clock
1: Alarm #1
2: Alarm #2
3: Alarm #3
7: Calculator
8: Countdown
Voice Service
1: Launch VSuite
2: Settings
1: Digit Dialing
1: Adapt Digits
2: Reset Digits
2: Sensitivity
1: Commands
1: Reject More
2: Recommended
89
3: Reject Less
2: Names
1: Reject More
2: Recommended
3: Reject Less
3: Choice Lists
1: Name Dialing
1: Automatic
2: Always On
3: Always Off
2: Digit Dialing
1: Automatic
2: Always On
3: Always Off
3: Contacts
1: Automatic
2: Always On
3: Always Off
4: Sound
1: Prompts (On/Off)
2: Digits (On/Off)
3: Names (On/Off)
4: Name Settings
1: Speed
1: Faster
2: Recommended
3: Slower
2: Volume
1: Louder
2: Recommended
3: Softer
5: Voice Launch
1: Talk Key
2: Talk and Flip Open
6: About
90
Call History
1: Outgoing Calls
2: Incoming Calls
3: Missed Calls
4: Erase History
1: Outgoing Calls
2: Incoming Calls
3: Missed Calls
4: All Calls
Web
Settings
1: Display
1: Screen Saver
1: Main LCD
1: Preset Image
1: Balloon
2: Highway
3: Candy
4: Beach
5: Video
6: Bike
7: Launch Pad
8: Digital Clock
9: World Time
10: Calendar
11: Dual Clock
12: Analog Clock
2: Downloads
2: Menu Style
1: 3*3 style
2: List style
3: Display Type
1: External LCD
1: Normal Display
91
2: Inversive Display
4: Incoming Call
1: With Caller ID
1: Default
2: Downloads
2: No Caller ID
1: Default
2: Downloads
5: Dialing Font
1: Color
1: Basic
2: Rainbow
3: Monochrome
4: Hyphenate
2: Size
1: Large
2: Normal
6: Greeting
1: Sprint PCS
2: Custom
7: Backlight
1: Main Display
1: Flip open
2: 30 seconds
3: 15 seconds
4: 8 seconds
2: Keypad
1: Flip open
2: 30 seconds
3: 15 seconds
4: 8 seconds
5: Off
3: Pwr Save Mode (On/Off)
8: LCD Contrast
1: Main LCD
92
1: Lowest
2: Low
3: Med
4: High
5: Highest
2: External LCD
1: Lowest
2: Low
3: Med
4: High
5: Highest
9: Service Light (On/Off)
2: Sounds
1: Volume
1: Ringer
2: Messages
3: Voice Mail
4: Alarms
5: App. Volume
6: Ready Link
2: Ringer Type
1: Voice Calls
1: With Caller ID
2: No Caller ID
2: Messages
1: Voicemail
2: Text Message
3: Ready Link
4: Schedule
5: Roam Ringer
1: Normal
2: Distinctive
3: Alerts
1: Minute Beep (On/Off)
2: Service (On/Off)
93
3: Connect (On/Off)
4: Sig. Fade Tone (On/Off)
5: Power On/Off (On/Off)
6: R-Link Missed
1: Off
2: Once
3: Repeat
4: Continuous
4: Key Tone
1: Tone Type
1: Normal
2: Piano
3: Beep
2: Tone Level
1: Silence All
2: Level 1-8
5: Tone Length
1: Short
2: Long
6: TTS
1: TTS Mode (Enable/Disable)
2: TTS Volume
1: Silence All
2: Level 1-8
3: PCS Vision
1: Enable/Disable Vision
2: Net Guard (On/Off)
3: Update Profile
4: Ready Link
1: Enable/Disable (Enable/Disable)
2: Restart Ready Link
3: List Update
4: R-Link Guard (On/Off)
5: Sounds
1: Tones
94
1: Default
2: Sound 1-6
2: Notifications
1: Off
2: Once
3: Repeat
3: Missed Call Alert
1: Off
2: Once
3: Repeat
4: Continuous
4: Help
6: Speaker Phone (On/Off)
7: Default View
1: Company Groups (Displayed in menu when you
register in a company group)
2: Personal List
3: Personal Groups
8: Help
5: Security
1: Lock Phone
1: Unlocked
2: On power-up
3: Lock now
2: Change Lock
3: Special #
1: Empty
2: Empty
3: Empty
4: Erase Contacts (Yes/No)
5: Erase Downloads (Yes/No)
6: Reset Phone (Yes/No)
7: Lock Services
1: Voice: Unlocked/Locked
2: PCS Vision: Unlocked/Locked
95
3: Ready Link: Unlocked/Locked
6: Roaming
1: Set Mode
1: Automatic
2: Roaming only
3: Sprint
2: Call Guard (On/Off)
7: Launch Pad
1: Up Key
1: Contacts
2: Messaging
3: Text Inbox
4: VoiceSMS Inbox
5: Send Message
6: Send VoiceSMS
7: Downloads
8: Web
9: Voice Service
10: Voice Memo
11: Scheduler
12: Alarms
13: Calculator
14: Display
15: Ringer Type
16: Missed Events
2: Down Key
1: Contacts
2: Messaging
3: Text Inbox
4: VoiceSMS Inbox
5: Send Message
6: Send VoiceSMS
7: Downloads
8: Web
9: Voice Service
96
10: Voice Memo
11: Scheduler
12: Alarms
13: Calculator
14: Display
15: Ringer Type
16: Missed Events
3: Left Key
1: Contacts
2: Messaging
3: Text Inbox
4: VoiceSMS Inbox
5: Send Message
6: Send VoiceSMS
7: Downloads
8: Web
9: Voice Service
10: Voice Memo
11: Scheduler
12: Alarms
13: Calculator
14: Display
15: Ringer Type
16: Missed Events
4: Right Key
1: Contacts
2: Messaging
3: Text Inbox
4: VoiceSMS Inbox
5: Send Message
6: Send VoiceSMS
7: Downloads
8: Web
9: Voice Service
10: Voice Memo
97
11: Scheduler
12: Alarms
13: Calculator
14: Display
15: Ringer Type
16: Missed Events
8: Others
1: Abbrev. Dial (On/Off)
2: Contact Match (On/Off)
3: Restriction
1: Outgoing Call
1: Allow all
2: Contacts only
3: Special# only
4: Call Answer
1: Any key
2: Talk key
3: Flip open
5: Auto Answer (Car Kit/Headset) (Yes/No)
6: Language
1: English
2: Español
7: Airplane Mode (On/Off)
8: Location (On/Off)
9: Headset Mode
1: Voice Call
2: Ready Link
3: Button Off
10: Key Guard (On/Off)
11: TTY
1: Disable TTY
2: TTY+Hearing
3: TTY+Voice
4: Enable TTY
12: Update Phone SW
98
9: Phone Info
1: Phone Number
2: Icon Glossary
3: Version
4: Advanced
Downloads
1: Games
1: Get New
2: Tetris Demo
3: JAMDAT Bowling2 Demo
4: Ms. PAC-MAN DEMO
2: Ringers
1: Get New
2: Ringers Preview
3: Screen Savers
1: Get New
4: Applications
1: Get New
2: de Jour Meal Planner Trial
3: SportsTracker Trial
4: MobiTV Trial
Contacts
1: Find
2: Add New Entry
3: My Phone #
4: Speed Dial #s
5: Group Setting
1: Unassigned
2: Family
3: Friends
4: Colleague
5: VIPs
6: Empty
6: Services
99
1: Account Info
2: Customer Svc
3: Dir Assist
InUse Menu
Press
to display the following options:
1: Call History
2: Contacts
3: 3-Way Call
4: Messaging
5: Voice Memo
6: Tools
7: Phone Info
100
Viewing History
You’ll find the Call History feature very helpful. It is a list of
the last 20 phone numbers (or contact entries) for calls you
placed, accepted, or missed. Call History makes redialing a
number fast and easy. It is continually updated as new
numbers are added to the beginning of the list and the oldest
entries are removed from the bottom of the list.
Each entry contains the phone number (if it is available) and
contact entry name (if the phone number is in your Contacts).
Duplicate calls (same number and type of call) may only
appear once on the list.
To view a Call History entry:
1. Press Menu (
) to access the main menu.
2. Select Call History (
).
3. Select Outgoing Calls (
), Incoming Calls (
), or
Missed Calls (
).
4. Highlight the entry you wish to view and press
.
Tip: Access the Sprint PCS Ready Link call history from stand-
by mode by pressing R-Link (left softkey), Go To (left softkey)
and selecting a call list. This option is not available when
Sprint PCS Ready Link mode is set to Disable (see page 150), or
Tip:
102
Call History Options
For additional information and options on a particular call,
highlight a Call History entry and press
. This feature
displays the date and time of the call, the phone number (if
available), and the caller’s name (if the number is already in
your Contacts).
You can also view the next Call History entry by pressing the
navigation key right or view the previous entry by pressing
the navigation key left.
Tip:
By pressing Options ( ), you can select from the following
options:
ⅷ
Call: Speaker (
) allows you to call the number and talk
in speaker phone mode.
ⅷ
Send Msg (
) to send a text, picture, handwritten, or
VoiceSMS message.
ⅷ
Save (
) to save the number if it is not already in your
Contacts. (See “Saving a Phone Number From Call
Save is only displayed when the phone number is NOT saved
in the contact list.
Note:
ⅷ
Prepend (
) to add numbers to the beginning of the
selected number. (See “Prepending a Phone Number From
ⅷ
ⅷ
Erase (
) to delete the entry.
Copy (
) allows you to copy the contact to your
Ready Link personal list.
103
Making a Call From Call History
To place a call from Call History:
1. Press Menu (
) to access the main menu.
2. Select Call History (
).
3. Select Outgoing Calls (
), Incoming Calls (
), or
Missed Calls (
4. Use your navigation key to select a Call History entry
and press or press and select Call ( ).
).
You cannot make calls from Call History to entries identified
as No Caller ID or Restricted.
Note:
104
Saving a Phone Number From Call History
Your Sprint PCS Phone can store up to 300 contact entries.
Each entry’s name can contain up to twenty characters.
To save a phone number from Call History:
1. Use your navigation key to select a Call History entry
and press Options ( ).
2. Select Save (
3. Select New Entry or Existing Entry to save the number to
an existing entry and press
4. Select the desired label and press
5. Use the keypad to type in the new entry name and
press
).
.
.
.
6. Select Done ( ).
After you have saved the number, the new contact entry is
You cannot save phone numbers from calls identified as
No Caller ID or Restricted.
Note:
105
Prepending a Phone Number From
Call History
If you need to make a call from Call History and you happen
to be outside your local area code, you can add the
appropriate prefix by prepending the number.
To prepend a phone number from Call History:
1. Select a Call History entry and press
.
2. Select Options ( ).
3. Select Prepend (
).
4. Enter the prefix and press Call ( ).
106
Erasing Call History
To erase Call History:
1. Press Menu (
) to access the main menu.
).
2. Select Call History (
3. Select Erase History (
4. Select Outgoing Calls (
).
), Incoming Calls (
), or All Calls ( ).
5. Select Voice or Ready Link and press
6. If you are certain you want to erase the call history,
),
Missed Calls (
.
select Yes to confirm and press
.
107
108
Section 2G
Using Contacts
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Now that you know the basics that make it easier to stay in touch
with people and information, you’re ready to explore your
phone’s more advanced features. This section explains how to
use your phone’s Contacts and helps you make the most of
your contacts and time when you are trying to connect with
the important people in your life.
109
Adding a New Contact Entry
Your Sprint PCS Phone can store up to 300 contact entries.
Each entry’s name can contain up to twenty characters.
To add a new entry:
1. Press Menu (
) to access the main menu.
).
2. Select Contacts (
3. Select Add New Entry (
).
4. Enter a name for the new entry and press
.
5. Press the navigation key down to highlight the desired
6. Enter the phone number for the entry and press
.
7. Press Done ( ) to save.
After you have saved the number, the new contact entry is
110
Assigning a Group Entry
Once you save a contact entry, you can select between five
different group listings for the entry. By assigning a contact to
a group, you can also search easily by using a group search.
To assign a contact to a group:
1. Select Contacts ( ) to access the contact list.
2. Highlight the desired contact and press
.
3. Press Options ( ) and select Edit (
).
4. Press the navigation key down to highlight ( ).
5. Press the navigation key left or right to select one of the
following:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Unassigned
Family
Friends
Colleague
VIPs
6. Press
.
7. Select Done ( ).
111
Finding Contact Entries
There are several ways to display your contact entries: by
name, by speed dial number, by group, and by voice dial tags.
Follow the steps outlined in the sections below to display
entries from the Contacts menu.
Finding Names
To find contact entries by name:
1. Press Menu (
) to access the main menu.
2. Select Contacts (
).
).
3. Select Find (
4. Scroll through all the entries using your navigation key.
– or –
Enter the first few letters of an entry name in the Name
field. (The more letters you enter, the more your search
narrows.)
5. To display an entry, highlight it and press
; to dial an
entry's default phone number, highlight the entry and
press
Shortcut:
.
From standby mode, press Contacts (right softkey) to
display the Search feature.
112
Finding Speed Dial Numbers
To find phone numbers you have stored in speed dial locations:
1. Press Menu (
) to access the main menu.
).
2. Select Contacts (
3. Select Speed Dial #s (
).
4. Scroll through speed dial entries using your navigation
key. Speed dial numbers are displayed in numeric order.
– or –
Enter the number of a speed dial location using your
keypad.
5. To display an entry, highlight it and press
.
6. To dial the entry, highlight it and press
.
Finding Group Entries
To find entries designated as part of a group:
1. Press Menu (
) to access the main menu.
2. Select Contacts (
)
3. Select Group Setting (
).
4. Scroll through the group titles using your navigation
key. To display entries belonging to a group, highlight
the group and press
.
5. To dial the entry’s default phone number, press
.
113
Contact Entry Options
To edit a Contact entry’s information:
1. Select Contacts ( ).
2. Highlight the desired contact entry and press
.
3. Select Options ( ).
4. Select Edit (
). The following options are available:
Ⅲ
[Mobile, Home, Work, Pager, Others] allows you to
Ⅲ
[Email] allows you to add an email address to the
entry.
Ⅲ
Ⅲ
[URL] allows you to add a Web address to the entry.
[Memo] allows you to enter a memo entry
associated with the contact.
Ⅲ
[Unassigned, Family, Friends, Colleague, VIPs] allows
you to select a group type for the entry by pressing
the navigation key left or right.
Ⅲ
Ⅲ
[Default Ringer] to assign a ringer.
[Image] (No Image, Man, Animal, Other, Downloads)
allows you to assign a preset image to the contact
entry. To access the image options, press
for
Change.
114
Adding a Phone Number to a Contact Entry
To add a phone number to an entry:
2. Press Options ( ) and select Edit (
).
3. Press the navigation key down until the desired label is
highlighted.
4. Enter the new phone number and press
.
5. Press Done ( ) to save the new number.
Editing a Contact Entry’s Phone Number
To edit an entry’s phone number:
2. Press Options ( ) and select Edit (
3. Highlight the number you wish to edit and press
4. Press to clear one digit at a time, or press and hold
to erase the entire number.
).
.
5. Re-enter or edit the number and press
.
6. Press Done ( ) to save the number.
115
Assigning Speed Dial Numbers
Your phone can store up to 99 phone numbers in speed dial
locations. For details on how to make calls using speed dial
A speed dial number can be assigned to a contact entry once
it has been saved.
To assign a Speed Dial number:
1. Press Menu (
) to access the main menu.
).
2. Select Contacts (
3. Select Speed Dial #s (
4. Press the navigation key up or down to highlight an
available speed dial location and press
).
.
5. Highlight the desired contact entry by pressing the
navigation key up or down or by entering the first few
letters of the contact entry name. (If the entry has more
than one number, press
to display the entry and
use the navigation key to highlight the desired
number.).
6. Press
to assign.
116
Editing a Contact Entry
To make changes to an entry:
1. Display an internal contact entry.
2. Press Options ( ) and select Edit (
).
3. Highlight the part of the entry you wish to edit (Name,
Group, Ringer, etc.) and press
4. Add and/or edit the desired information and
press
.
.
5. Press Done ( ) to save your changes.
117
Selecting a Ringer Type for an Entry
You can assign a ringer type to a contact entry so you can
identify the caller by the ringer type. (See “Ringer Types” on
To select a ringer type for an entry:
1. Display a contact entry.
2. Press Options ( ) and select Edit (
).
3. Select Default Ringer ( ) and select Change
.
4. Press the navigation key left or right to select the
desired ringer category.
5. Press the navigation key down to highlight the Ringer
field. Press the navigation key left or right to scroll
through the available ringers. (A sample ringer will
sound as you highlight each option.)
6. When the desired ringer is selected, press
.
7. Press Done ( ) to save the new ringer type.
118
Dialing Sprint PCS Services
Your phone is preprogrammed with phone numbers for
various Sprint PCS Services.
To dial a service from your Contacts:
1. Press Menu (
) to access the main menu.
2. Select Contacts (
3. Select Services (
).
).
4. Select Account Info (
Dir Assist (
), Customer Svc (
), or
) and press
.
To dial a service from standby mode using your keypad:
1. Dial the appropriate service number:
Ⅲ
Customer Service –
.
Ⅲ
Directory Assistance –
.
Ⅲ
Ⅲ
Account Info –
.
Sprint PCS Operator –
.
Ⅲ
Sprint PCS Voice Command –
to place the call.
.
2. Press
119
120
Section 2H
Using the Phone’s Scheduler and Tools
In This Section
ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Phone is equipped with several personal
information management features that help you manage
your busy lifestyle. This section shows you how to use these
features to turn your phone into a time management planner
that helps you keep up with your contacts, schedules, and
commitments. It takes productivity to a whole new level.
121
Using Your Phone’s Scheduler
Adding an Event to the Scheduler
Your Calendar helps organize your time and reminds you of
important events.
To add an event:
1. Press Menu (
2. Select Tools (
3. Select Scheduler (
) to access the main menu.
).
).
4. Using your navigation key, highlight the day to which
you would like to add an event.
5. Select Options ( ).
6. Select Add New (
).
Press the navigation key up or down to scroll by week through
the Calendar or left or right to scroll by day. Press Options to
jump to a specific date.
Tip:
7. Enter a description for the event using the keypad and
8. Enter the start time and then press the navigation key
down and enter the date of your event using the
keypad.
9. Press the navigation key down to highlight End.
10. Enter the end time and then press the navigation key
down and enter the end date of your event.
122
11. Press the navigation key down to highlight the
Alert ( ) field. Press the navigation key left or right to
select one of the following alert notifications:
Ⅲ
No Alarm, On Time, 10min before, 30min before, or
1Hr before
12. Select Done ( ) to save the event.
Event Alerts
There are several ways your Sprint PCS Phone alerts you of
scheduled events:
ⅷ
ⅷ
ⅷ
ⅷ
By playing the assigned ringer type.
By illuminating the backlight.
By flashing the LED.
By playing animation.
Event Alert Menu
When your phone is turned on and you have an event alarm
scheduled, your phone alerts you and displays the event
summary. To silence the alarm and reset the schedule,
press
.
123
Viewing Events
To view your scheduled events:
1. Press Menu (
2. Select Tools (
3. Select Scheduler (
) to access the main menu.
).
).
4. Using your navigation key, highlight the day for which
you would like to view events.
5. Select Options ( ) and select View (
). (If you have
events scheduled for the selected day, they will be listed
in chronological order).
In the calendar view, days with events scheduled are outlined.
Tip:
6. To display the details of an event listed in the schedule,
highlight it and press
.
Going to Today’s Calendar Menu
The Today menu allows you to view the events for the day.
To access the today menu:
1. Press Menu (
2. Select Tools (
3. Select Today (
) to access the main menu.
).
).
124
Erasing a Day’s Events
To erase a day’s scheduled events:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Scheduler (
).
4. Using your navigation key, highlight the day for which
you would like to erase events and press
.
In the calendar view, days with events scheduled are outlined.
Tip:
5. Press Options ( ) and select Erase All (
).
(A confirmation will appear asking you to confirm the
deletion.)
6. Select Yes or No and press
.
125
Using Your Phone’s Alarm Clock
Your phone comes with a built-in alarm clock with multiple
alarm capabilities.
To use the alarm clock:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Alarm Clock (
).
4. Select Alarm #1 (
), Alarm #2 (
), or
Alarm #3 (
).
5. Press the navigation key left or right to select On.
6. Press the navigation key down to highlight the
Time (
) field. Enter a time for the alarm using the
for AM or for PM.)
keypad. (Press
7. Press the navigation key down to highlight the
Ringer Type ( ) field.
8. Press the navigation key left or right to select the
desired ringer.
9. Press the navigation key down to highlight the Repeat
field. Press the navigation key left or right to select one
of the following:
Ⅲ
Daily, Once, Mon to Fri, or Sat & Sun
10. Select Done ( ) to save.
When an alarm alert sounds, press Dismiss (right softkey) to
turn the alarm off or press Snooze (left softkey) to sound the
alert again in 10 minutes.
Tip:
126
Using Your Phone’s Memo Pad
Your Sprint PCS Phone comes with a memo pad you can use
to compose and store reminders and notes to help keep you
organized.
To compose a memo:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Memo Pad (
).
If there are no existing memos already saved, the new memo
screen will automatically be displayed.
Note:
4. Select Options ( ) and press
for Add New.
5. Type your note using the keypad and select Done ( ).
To read a saved memo:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Memo Pad (
).
4. Highlight a memo and press
.
127
To delete saved memos:
1. Press Menu (
) to access the main menu.
2. Select Tools (
).
3. Select Memo Pad (
).
4. Highlight a memo and select Options ( ).
5. Select Erase (
) to erase the highlighted memo or
) to erase all saved memos.
Erase All (
6. Select Yes to confirm and press
.
128
Using Your Phone’s Tools
In addition to helping you be more efficient and organized,
your Sprint PCS Phone offers useful and entertaining tools.
Using the Task List
Your phone comes with a built-in task list to allow you to
keep track of important items.
To use the task list:
1. Press Menu (
2. Select Tools (
3. Select Task List (
) to access the main menu.
).
).
If there are no existing tasks, the New Task screen is
automatically displayed.
Note:
4. Select Options ( ) and press
for Add New.
5. Enter the Task Description and select Next ( ).
6. Enter the Due Time and press the navigation key down
to highlight the Due Date field.
7. Enter the Due Date and press the navigation key down
to highlight the Priority field.
8. Select the desired Priority (Low or High) by pressing the
navigation key left or right.
9. Select Done ( ) to save.
129
Viewing a Saved Task
1. Press Menu (
2. Select Tools (
3. Select Task List (
) to access the main menu.
).
).
4. Highlight a task and press
.
Deleting a Task
1. Press Menu (
2. Select Tools (
3. Select Task List (
) to access the main menu.
).
).
4. Highlight a task and select Options ( ).
5. Select Erase ( ) to erase the highlighted task or Erase
) to erase all saved tasks.
All (
6. Select Yes to confirm and press
World Time
.
To view the time in over twenty different locations:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select World Time (
).
4. Press the navigation key left or right to scroll through
different time zones.
You can turn Daylight Savings Time on or off by pressing the
right softkey to select DST Setting.
Note:
130
Using the Calculator
Your phone comes with a built-in calculator.
To use the calculator:
1. Press Menu (
2. Select Tools (
3. Select Calculator (
) to access the main menu.
).
).
4. Enter the first number using your keypad and perform
one of the following functions:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Press the navigation key up for Multiplication (x).
Press the navigation key down for Division (÷).
Press the navigation key left for Subtraction (-).
Press the navigation key right for Addition (+).
Ⅲ
Ⅲ
Press
Press
or
for a decimal point.
for a negative or positive number.
to clear the calculation.
Ⅲ
Press
5. Enter the second number and press
for Equal (=).
131
Countdown
Countdown allows you to enter a future date and time into
the phone and then see the amount of days, hours, and
minutes until that time is reached.
To set up a new countdown:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Countdown (
).
If there are no existing countdowns, the New Countdowns
screen is automatically displayed.
Note:
4. Select Options ( ) and press
for Add New.
5. Enter the Countdown Description and select Next ( ).
6. Enter the Input Time and Date and select Done ( ).
7. Press
for AM or
for PM.
To view a countdown:
1. Press Menu (
) to access the main menu.
).
2. Select Tools (
3. Select Countdown (
).
4. Highlight the desired countdown and press
.
When viewing an existing countdown, press the navigation
key left or right to cycle between countdown entries.
Note:
132
Section 2I
Using Your Phone’s Voice Services
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Vision Phone’s Voice Services let you place
calls using your voice, store voice reminders, check phone
status, and record memos right on your phone. This section
includes easy-to-follow instructions on using voice-activated
dialing.
133
Activating Voice Recognition
Voice recognition allows you to say commands to perform
common functions supported by your phone. There is no
voice training required to use the voice recognition feature.
You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired
function.
To activate voice recognition:
1. Press and hold
or
. (The phone prompts you
to say a voice command.)
2. Wait for the beep and then say one of the following
commands:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Voice Dial
Name Dial
Contacts
Voice Memo
Status
My Phone #
When it recognizes one of these commands, the phone
launches the associated application. If the phone does not
hear a command within approximately eight seconds, it de-
activates voice recognition without taking any action.
If you want to use a different button to activate voice
recognition, press the left softkey for Menu and select
Settings. Press 7 for Launch Pad. On this menu, you can
change button assignments, including the button used to
launch “Voice Dial,” which is the voice recognition
application.
Note:
134
Section 2I: Using Your Phone’s Voice Services
Using Voice Dial
Voice Dial allows you to dial any valid 7 or 10 digit North
American phone number or contact entry by speaking the
number or name naturally, without pausing.
Tips for using Voice Dial:
ⅷ
Voice Dial works best in quieter environments.
ⅷ
When saying a number (Digit Dialing), speak at a normal
speed and say each digit clearly. There is no need to pause
between digits.
ⅷ
The phone recognizes the digits one, two, three, four, five,
six, seven, eight, nine, zero, and oh. The phone does not
recognize numbers such as “one eight hundred” for
“1-800.” Instead, say “one-eight-zero-zero.”
ⅷ
ⅷ
The phone recognizes only valid 7 or 10 digit North
American phone numbers.
If your phone does not usually recognize you correctly
when you are using Digit Dial, try adapting Digit Dial to
your voice, which can significantly improve accuracy for
details.)
To place a call using Voice Dial:
1. Activate voice recognition by pressing and holding
.
(The phone prompts you for a command.)
2. Say Voice Dial. (The phone prompts you to say the name
or number clearly.)
3. Say a valid contact entry or 7 or 10 digit North American
phone number naturally and clearly, or say a name from
your Contacts.
135
4. If the phone asks you, “Did You Say,” followed by the
correct name or number, say Yes.
5. If the phone asks you, “Did You Say,” followed by an
incorrect name or number, say No. (If there are other
alternatives, the phone will prompt you with the next
one. You can also select the desired number by using
the navigation key. The phone will then dial the
number.)
Enabling/Disabling Digit Dial Choice Lists
You can customize whether the Digit Dial feature displays the
list of top voice recognition choices or automatically dials the
first number, without displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Press Menu (
) to access the main menu.
).
2. Select Voice Service (
3. Select Settings (
).
4. Select Choice Lists (
5. Select Digit Dialing (
).
).
6. Press the navigation key up or down to select Automatic,
Always On or Always Off and press
.
136
Section 2I: Using Your Phone’s Voice Services
Adapting Digit Dial
Digit Dialing is speaker independent, which means that no
training or adaptation is required. Some users with heavy
accents or unusual voice characteristics may find difficulty in
achieving high accuracy with speaker independent Digit
Dialing, so the Adapt Digits feature allows users to
dramatically improve the digit accuracy through adaptation.
Users who get acceptable digit recognition accuracy will find
no additional benefit to performing the Adapt Digit
adaptation.
After you adapt Digit Dial, your phone will be customized to
your voice. Other people will not be able to use Digit Dial on
your phone unless they reset the phone to factory defaults.
ONLY adapt Digit Dial if the system is frequently
mis-recognizing your speech. You can always restore the
system to its original factory setting.
Note:
Adaptation involves recording several digit sequences to
teach the system your voice. The adaptation process takes
about 3 minutes.
Tips for adapting Digit Dial:
ⅷ
ⅷ
ⅷ
ⅷ
Adapt digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, but say each digit sequence naturally.
If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils the
recording, you can say or select No when the prompt asks,
“Did the recording sound OK?” You will then be prompted
to re-record the sequence.
137
To adapt Digit Dial to your voice:
1. Press Menu (
) to access the main menu.
2. Select Voice Service (
).
3. Select Settings (
).
4. Select Digit Dialing (
).
). (The phone displays the first
5. Select Adapt Digits (
digit sequence.)
6. When you are ready to start recording, press
. (The
phone prompts you to say the first sequence of digits.)
7. Wait for the beep, and then repeat the digits using a
normal tone of voice. (The phone plays back your
recording and asks you if the recording sounds “OK.”)
Ⅲ
If the recording sounds OK (no mistakes and no
background noises), say Yes.
Ⅲ
If you need to re-record the digits to fix any
problems, say No. (The phone then prompts you to
say the digits again.)
8. Wait for the beep, and then record the digits again.
(Repeat this step until you are satisfied with the
recording.)
9. After confirming that the recording sounds OK, repeat
the recording process with the next set of digits.
10. Repeat steps 8-10 for another nine sets of digits.
11. When you are finished with a full session, you will reach
a screen that reads, “Adaptation Complete.”
138
Section 2I: Using Your Phone’s Voice Services
Resetting Digit Dial Adaptation
To erase any adaptation and reset Digit Dial to its original state:
1. Press Menu (
) to access the main menu.
).
2. Select Voice Service (
3. Select Settings (
).
4. Select Digit Dialing (
5. Select Reset Digits (
).
).
6. Press
to select OK.
139
Using Name Dial
For best results with Name Dial, enter first and last names
in your contacts, avoid using abbreviations, and make sure
the names are spelled correctly. Name Dial automatically
voice-activates every entry in your contacts without the need
to record or “train” names before using them. With Name
Dial you can dial any person in your contacts by saying that
person's name.
To place a call using Name Dial:
1. Activate voice recognition by pressing and holding
.
(The phone prompts you for a command.)
2. Say Name Dial. (The phone prompts you to say a name or
a phone number.)
3. Say the full name of the person you want to call, exactly
as it is entered in your contacts. (The phone plays the
name through the earpiece and displays it on the
screen.)
Ⅲ
If the contact contains only one number for the
name, the phone automatically dials that number.
Ⅲ
If the name that you spoke has more than one
number associated with it, the phone displays the
different locations (Home, Work, Mobile, Pager, or
Others) and asks you which one to dial. Say one of
the location names and the phone will dial the
number for the location you specified.
140
Section 2I: Using Your Phone’s Voice Services
Enabling/Disabling Name Dial Choice Lists
You can customize whether the Name Dial feature displays a
list of choices for names that sound alike, or brings up
information for the first recognized name without displaying
a choice list.
1. Press Menu (
) to access the main menu.
).
2. Select Voice Service (
3. Select Settings (
).
4. Select Choice Lists (
5. Select Name Dialing (
).
).
6. Press the navigation key up or down to select Automatic,
Always On, or Always Off and press . (When choice
lists are enabled for Name Dial, after you say the name,
the phone will display one or more names on the screen
and prompt you to confirm the name you spoke.)
Ⅲ
If the phone says, “Did you say,” followed by the
correct name, say Yes.
Ⅲ
If the phone says, “Did You Say,” followed by an
incorrect name, say No. The phone will prompt you
with the next name, if there is one. If there are no
more names, the phone will say “Sorry, No Match
Found,” and will not place a call.
141
Using Contacts
Contacts allows you retrieve contact information for any
entry saved in your contact list by saying the full name of the
person.
To retrieve information using Contacts command:
1. Activate voice recognition by pressing and holding
.
(The phone will prompt you for a command.)
2. Say Contacts. (The phone will prompt you to say the
name.)
3. Say the full name of the person, exactly as it is entered
in your contacts. (The phone will play the name it
recognized through the earpiece, and then open the
contact information for that name.)
142
Section 2I: Using Your Phone’s Voice Services
Enabling/Disabling Contact Choice Lists
You can customize whether the Contacts feature displays a
list of choices for names that sound alike, or brings up
information for the first recognized name without displaying
a choice list.
To enable or disable choice lists for the Contacts command:
1. Press Menu (
) to access the main menu.
).
2. Select Voice Service (
3. Select Settings (
4. Select Choice Lists (
5. Select Contacts (
).
).
).
6. Press the navigation key up or down to select Automatic,
Always On, or Always Off and press . (When choice
lists are enabled for contacts, after you say the name,
the phone will display one or more names on the screen
and prompt you to confirm the name you spoke.)
Ⅲ
If the phone says, “Did You Say,” followed by the
correct name, say Yes.
Ⅲ
If the phone says, “Did You Say,” followed by an
incorrect name, say No. The phone then prompts
you with the next name, if there is one. If there are
no more names, the phone will say “Sorry, No Match
Found.”
143
Voice Memos
You can use your phone’s voice recognition feature or the
main menu option to record brief memos to remind you of
important events, phone numbers, or grocery list items.
Recording Voice Memos Using Voice Recognition
To record a voice memo using voice recognition:
1. Press and hold
to activate voice recognition.
(The phone prompts you to say a voice command.)
2. Wait for the beep and say Voice Memo.
3. Start recording the memo after the beep.
4. Select Done ( ).
Recording Voice Memos Using the Main Menu Option
To record a voice memo using the main menu option:
1. Press Menu (
) to access the main menu.
2. Select Voice Memo (
).
3. Select Record (
). (The phone prompts you to start
recording after the beep.)
4. Wait for the beep and then start speaking. (As it is
recording, the phone displays a countdown timer that
shows how many seconds are left for recording.)
5. To pause the memo, select Pause ( ). To resume the
recording, select Resume ( ).
6. To finish recording, select Done ( ).
144
Section 2I: Using Your Phone’s Voice Services
To record a conversation during a phone call:
1. During a call, select Options ( ).
2. Select Voice Memo (
) (A 1 minute counter is
displayed on the screen to indicating the amount of
time a single voice memo can be recorded.)
Only incoming audio is recorded when selecting voice memo
during a call.
Tip:
3. To pause the memo, select Pause ( ). To resume the
recording, select Resume ( ).
4. To finish recording, select Done ( ).
A total of ten 1 minute memos can be recorded and saved.
Tip:
Reviewing and Erasing Memos
To play the voice memos you have recorded:
1. Press Menu (
) to access the main menu.
2. Select Voice Memo (
).
3. Select Review (
). (The phone displays a list of saved
memos, with the first one selected.)
4. Highlight the desired memo and press
.
– or –
Press the number corresponding to the memo you want
to review.
145
To erase an individual memo:
1. Press Menu (
) to access the main menu.
2. Select Voice Memo (
).
3. Select Review (
4. Highlight the desired memo to erase and select Options
).
5. Select Erase (
).
(
).
6. Select Yes and press
.
To erase all voice memos:
1. Press Menu (
) to access the main menu.
).
2. Select Voice Memo (
3. Select Review (
).
).
4. Select Erase All (
5. Select Yes and press
.
146
Section 2I: Using Your Phone’s Voice Services
Phone Status Information
The voice recognition Status option gives you an update on
your phone's service, signal strength, and battery level.
To retrieve your phone's status information:
1. Press and hold
to activate voice recognition.
(The phone prompts you to say a voice command.)
2. Wait for the beep and say Status. (The following chart
outlines the status responses.)
No Coverage - When handset is scanning.
Coverage
Sprint Coverage - Handset is on a non-roam
system.
Digital Roam - Handset is on a digital roam
system.
High - Number of bars displayed is 4 or more.
Good - Number of bars displayed is 2/3.
Low - Number of bars displayed is 0/1.
No Signal - Handset is scanning for system.
Signal Strength
Battery
High - Number of bars displayed in the battery
icon is 3.
Medium - Number of bars displayed in the
battery icon is 2.
Low - Number of bars displayed in the battery
icon is 1.
Empty - Low battery alert.
147
My Phone Number
You can use your phone’s Voice Services to hear and display
your phone number on-screen.
Getting Your Phone Number
To access your phone number:
1. Press and hold
to activate voice recognition. (The
phone prompts you to say a voice command.)
2. Wait for the beep and say My Phone Number.
148
Section 2I: Using Your Phone’s Voice Services
Section 2J
Using Sprint PCS Ready LinkSM
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Your Sprint PCS Vision Ready Link Phone gives you the ability
to quickly connect with other Sprint PCS Ready Link users
for “walkie-talkie-style” communication from anywhere, to
anywhere on the Nationwide Sprint PCS Network.
This section explains the features and options of your
Sprint PCS Vision Ready Link Phone and Service.
Section 2J: Using Sprint PCS Ready Link
149
Getting Started With Sprint PCS Ready Link
Sprint PCS Ready Link allows you to enjoy quick, two-way,
“walkie-talkie-style” communication with your friends,
family, and co-workers. You can make one-to-one or
one-to-many calls (up to five others on the same call) to any
other Sprint PCS Ready Link user, anywhere on the
Nationwide Sprint PCS Network. You can make and receive
Sprint PCS Ready Link calls when your phone displays the
Ready Link icon.
Setting Sprint PCS Ready Link Mode
To enable or disable Sprint PCS Ready Link mode:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select Enable/Disable (
).
.
5. Select Enable and press
Ⅲ
Enable: Lets you make or receive Sprint PCS
Ready Link calls any time your phone is not in use.
Ⅲ
Disable: Disables your phone's Sprint PCS Ready Link
service; you will not be able to make or receive
Sprint PCS Ready Link calls or access your Ready Link
contacts.
150
Section 2J: Using Sprint PCS Ready Link
Preparing Your Phone for Sprint PCS
Ready Link Service
Every time you turn on your phone, your phone will identify
itself and make itself available to the Ready Link network.
ᮣ
When you turn on your phone in an area where
Sprint PCS Ready Link service is available, your phone
will display “Preparing...Please wait.” (When the Ready
Link icon appears on the display, your phone is ready to
make and receive Sprint PCS Ready Link calls.)
Ready Link Call Alerts
There are several ways your phone alerts you during
Sprint PCS Ready Link calls.
When you make or receive a Sprint PCS Ready Link call:
ⅷ
The phone sounds (depending on the Ringer Type and
Ringer Volume setting).
ⅷ
ⅷ
ⅷ
The backlight illuminates.
The screen displays a Sprint PCS Ready Link call message.
The other party's Sprint PCS Ready Link number and name
(if available) are displayed.
ⅷ
The screen displays who has the floor.
Section 2J: Using Sprint PCS Ready Link
151
The status of a Sprint PCS Ready Link call is displayed as
follows:
ⅷ
The Green LED On indicates you have the floor and
may speak.
ⅷ
ⅷ
The Red LED On indicates another contact has the floor.
The LED Off indicates the floor is open. (You can take the
floor and speak by pressing and holding
.)
Main LCD Display during a Ready Link Call
152
Section 2J: Using Sprint PCS Ready Link
Making and Receiving a Sprint PCS
Ready Link Call
Displaying the Sprint PCS Ready Link List
ᮣ
From standby mode, press R-Link ( ) or the Ready Link
button on the side of your phone (
the Sprint PCS Ready Link List.
) to access
The first time you access the list, the Sprint PCS Ready Link
Help message will appear. Press Yes (left softkey) and Next
(left softkey) to read a brief introduction of Sprint PCS
Ready Link.
Tip:
Selecting a Contacts List
When your phone displays a Sprint PCS Ready Link List, the
left softkey is labeled Go To. To switch to another contact list,
press Go To ( ), highlight your desired list, and press
.
ⅷ
Personal List/Personal Groups. contain your personal
Ready Link contact names and numbers, separately or in
groups. You can create and edit your own Personal List.
Your phone can store a total of 200 entries (you may
include up to five contacts per group).
ⅷ
ⅷ
ⅷ
Outgoing Calls shows the last 10 different
Sprint PCS Ready Link calls you placed.
Incoming Calls shows the last 10 different
Sprint PCS Ready Link calls you accepted.
Missed Calls shows the last 10 Sprint PCS Ready Link calls
you missed.
Section 2J: Using Sprint PCS Ready Link
153
Making a Sprint PCS Ready Link Call
(One-to-One Call)
You can place a one-to-one Sprint PCS Ready Link call by
entering a Sprint PCS Ready Link number or by selecting a
contact from the Sprint PCS Ready Link List.
To place a Sprint PCS Ready Link call by selecting a contact:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight the list from which you want
to place a call (Enter R-Link#, Company Groups (if
Registered), Personal List, Personal Groups, Missed Calls,
Outgoing Calls, or Incoming Calls) and press
.
You can also select Enter R-Link# from the Go To option to enter
details.)
Tip:
3. Scroll to the contact you want to call, and press and hold
to place the call and get the floor. (You will see
“Calling...” and “Connecting...” followed by “You have
floor.” You can now begin speaking.)
– or –
Scroll to the contact you want to call and press and
release
to place the call. (The call will connect
as described above, but “Floor is open.” will appear on
the screen and either you or your contact may press and
hold
to take the floor and speak.
154
Section 2J: Using Sprint PCS Ready Link
4. Continue holding
as you speak. (When you are
to allow the other
finished speaking, release
contact to speak. When the other party takes the floor,
you will see the speaker’s name and phone number and
the text “has floor.”)
During a Sprint PCS Ready Link call, the “floor” is the right to
speak. When you see “Floor is open,” the first person to press
the Ready Link button can speak (while holding the button).
Only the person who has the floor can speak. The phone
beeps if you press the Ready link button when another
contact has the floor.
Note:
5. When you are finished, press
.
When neither party has the floor during a Sprint PCS
Ready Link call, “Floor is open” appears on the display. If no
one takes the floor for 20 seconds, the Sprint PCS Ready Link
call ends automatically.
Note:
If you press Talk or Speaker during step 3 above, you can make
a standard voice call.
Tip:
Section 2J: Using Sprint PCS Ready Link
155
Making a Sprint PCS Ready Link Call (Group Call)
You can make a Sprint PCS Ready Link call to all members in a
Group entry, which you have in your Sprint PCS Ready Link
List. You can communicate with up to five members at a time.
To place a Sprint PCS Ready Link Group call:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight the list from which you want
to place a call (Personal Groups, Outgoing Calls, Incoming
Calls, or Missed Calls), and press
3. Scroll to the group you want to call, and press and
hold to place the call and take the floor. (You
.
will see “R-Link calling...” and “Connecting...” followed
by “You have floor.” Continue with the Sprint PCS Ready
Link call as described on the previous page.)
Ⅲ
To make a Sprint PCS Ready Link call to a group
member, select your desired group, highlight your
desired group member, and press and hold
.
Ⅲ
If one of the group members takes the floor, you will
see the member's name and Sprint PCS Ready Link
number on the display.
4. When the call is finished, press
.
The phone beeps if you press the Ready Link button when
another contact has the floor.
Tip:
To redial your last Sprint PCS Ready Link call, highlight Redial
at the top of the Sprint PCS Ready Link List page, and press
and hold the Ready Link button.
156
Section 2J: Using Sprint PCS Ready Link
Making a Sprint PCS Ready Link Call by
Entering a Number
To place a Sprint PCS Ready Link call by entering a number:
1. From standby mode, enter the Sprint PCS Ready Link
number you want to dial.
2. Press
to place the Sprint PCS Ready Link call.
to take the floor and speak.
3. Continue holding
Ⅲ
The contact's name appears on the display if
there is a matched number in your Sprint PCS
Ready Link List.
4. Continue with the Sprint PCS Ready Link call, pressing
and holding ...while speaking.
5. When the call is finished, press
.
– or –
Press R-Link ( ) or press
.
6. Press Go To ( ), highlight Enter R-Link# and press
.
7. Enter the Sprint PCS Ready Link number you want
to dial.
8. Follow steps 2-5 above.
Sprint PCS Ready Link numbers must contain ten digits
(area code + phone number). Your Sprint PCS Ready Link
number is the same as your Sprint PCS Phone number.
Note:
Section 2J: Using Sprint PCS Ready Link
157
Missed Call Notification for Sprint PCS
Ready Link Calls
When an incoming Sprint PCS Ready Link call is not answered,
the Missed Call Notification screen is displayed.
To call the last Missed Sprint PCS Ready Link call:
ᮣ
Simply press and hold
while the Missed Call
Notification is displayed. (Continue with the Sprint PCS
Ready Link call as described previously.)
If you have two or more missed calls, the call log list will
appear. Different icons will be displayed when you have
different types of notifications.
Tip:
To erase the Missed Call log:
ᮣ
Press Dismiss ( ).
If you press End before checking your notification, Contacts
(right softkey) appears in standby mode. Press Contacts (right
softkey) to display the notification list.
Tip:
When you display Missed Calls entries, you will see an icon
next to the name. The icon will remain until you make or
receive a Sprint PCS Ready Link call to or from the entry.
Note:
158
Section 2J: Using Sprint PCS Ready Link
Receiving a Sprint PCS Ready Link Call
To receive a Sprint PCS Ready Link call:
1. Make sure your phone's Sprint PCS Ready Link mode is
2. When you receive a Sprint PCS Ready Link call from a
contact, “R-Link Call,” the contact's name, and the
Sprint PCS Ready Link number appear on the display.
(You do not need to take any action to answer the call.)
Ⅲ
When you receive a group call, “Group Call,” the
group member's name, and the Sprint PCS
Ready Link number appear.
3. If the person placing the call has kept the floor (held the
Ready Link button), you will see the contact name and
Sprint PCS Ready Link number along with “has floor,”
and you will hear the caller speaking.
4. When the caller finishes speaking and releases the
Ready Link button, you will see “Floor is open.” on the
display screen. Press and hold
to take the floor
and reply to the caller. (You will see “You have floor” and
hear a tone confirming that you may speak.)
5. When the conversation is finished, press
.
You can also receive a Sprint PCS Ready Link call with the flip
closed. Press and hold the Ready Link button to take the floor
when the floor is open.
Tip:
Section 2J: Using Sprint PCS Ready Link
159
You can change the volume and the speaker setting while a
Sprint PCS Ready Link call is activated.
Note:
ⅷ
Volume: Adjust the voice volume by using the Side
Volume key or by pressing the navigation key up or
down except when you are pressing and holding the
Ready Link button.
ⅷ
Speaker: Switch the speaker on or off by pressing the
Speaker button.
Sprint PCS Ready Link Options
When you use Sprint PCS Ready Link, several user options are
available by pressing Options ( ). To select an option,
highlight it and press
.
ⅷ
Copy to Contacts to copy a contact to the Personal List.
Copy Group appears when you highlight a group. (This
option doesn't appear if the entry is already in the
Personal List or when you select Personal List/Personal
Groups.)
ⅷ
ⅷ
ⅷ
ⅷ
Edit to edit a Sprint PCS Ready Link number and/or name.
Erase to erase a contact. Erase Group appears when you
highlight a group.
New Contact to add a new contact. Add Group appears
Erase R-Link List to erase entries saved in the Sprint PCS
Ready Link List (except Company List/Company Groups).
ⅷ
ⅷ
Send VoiceSMS to send a voice SMS message.
Help to see the Sprint PCS Ready Link instruction page.
160
Section 2J: Using Sprint PCS Ready Link
Adding and Editing Ready Link Contacts
Copying an Entry to Your Personal List or
Personal Group List
You can copy an entry to your Personal Lists from several
different sources. If the selected entry is already stored in the
Personal Lists, the “copy” option does not appear.
To copy an entry from the Sprint PCS Ready Link List:
1. Press R-Link ( ) or press
.
2. Press Go to ( ), highlight the list from which you want
to copy an entry (Outgoing Calls, Incoming Calls, or
Missed Calls), and press
.
3. Select the entry you want to copy (or scroll to highlight
the Redial entry at the top of your screen) and press
Options ( ). To select an option, highlight it and
press
.
Ⅲ
Ⅲ
Ⅲ
Copy to Personal List to copy the contact to the
Personal List.
Copy to Group List to copy the group to the
Personal Group List.
Copy to Contacts List to copy the contact to the
Contacts list.
4. Select Yes to copy and save the entry to your
Personal List or Personal Group List.
Your Company Lists can only be set up and edited by an
administrator on the Sprint PCS Ready Link server. You cannot
add or edit contacts/groups to your Company Lists.
Note:
Section 2J: Using Sprint PCS Ready Link
161
Saving a Sprint PCS Ready Link Number
When you have finished a Sprint PCS Ready Link call, you will
see the Sprint PCS Ready Link number and the text
“R-Link call ended.” on the display. You can save a
Sprint PCS Ready Link number from the ending display to your
Personal Lists.
To save the number:
ᮣ
From the end display, select Options ( ) and
press for Save.
Ⅲ
If the entry has no name, you are prompted to enter
a name.
If the number is already stored in the Personal List or
Personal Groups, the “Save” softkey does not appear.
Note:
Finding an Entry in the Sprint PCS Ready Link List
You can find your desired entry by entering a few letters.
To find a Sprint PCS Ready Link entry:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight your desired list (Personal List
or Personal Groups.), and press
3. Enter the first letter or the first few letters of the name.
.
Ⅲ
The display shows a list of the contacts that begin
with the letter(s) you entered.
4. Scroll through the list and press
to select your
desired entry.
162
Section 2J: Using Sprint PCS Ready Link
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal List.
To add a new Sprint PCS Ready Link contact:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight Personal List, and press
.
3. Select <New Contact> and press
.
– or –
Highlight a contact and press Options ( ). Then
highlight New Contact and press
4. Enter a name for the new contact and press
.
.
(This is the name you will see when calling or receiving a
call from the contact.)
5. Select R-Link Number, enter the contact's 10-digit
Sprint PCS Ready Link number (their Sprint PCS Phone
number) and press
.
6. Press Done ( ) to save the new contact to your
Personal List.
You are not allowed to use the following symbols during
step 4: @ : ; / * } {
Tip:
Section 2J: Using Sprint PCS Ready Link
163
Adding a New Group to Your Personal Group List
You can add new groups to the Personal Group List. Each
group can include up to five members. You can enter a group
member directly or select the member from the Company List
or Personal List.
To add a new Sprint PCS Ready Link group entry:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight Personal Groups, and
press
.
3. Select <New Group> and press
.
– or –
Highlight an entry and press Options ( ). Then
highlight New Group and press
.
4. Enter a Group Name, press
, and press Next ( ).
5. To add contacts to the group, press Add ( ).
6. Highlight one item from the following and press
.
Ⅲ
Ⅲ
Ⅲ
New to add a new contact. See the previous page
for details.
from Company to add a contact from your Company
List (if applicable).
from Personal to add a contact from your
Personal List.
7. Scroll to the contacts you want to add and press
or
select Pick ( ) to include the entries.
164
Section 2J: Using Sprint PCS Ready Link
8. Press Done ( ) when you are finished selecting
contacts, then press Update ( ) to update your
Personal Group List with the new group entry.
You can also add members directly by selecting New Members
during step 5 above. Enter the new members’s name and
R-Link number and press Done (left softkey) to save the entry.
Tip:
Editing a Contact in Your Personal List
To edit a Personal List contact:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), highlight Personal List, and press
3. Scroll to the entry you want to edit and press
Options ( ).
.
Ⅲ
Copy to Contacts to copy the entry to the Contacts
list.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Edit to edit the selected contact.
Erase to erase the selected contact.
New Contact to add a new contact.
Erase R-Link List to erase the Sprint PCS
Ⅲ
Ⅲ
Send VoiceSMS to send a voice SMS message.
Help to view the Sprint PCS Ready Link
instruction page.
4. Highlight Edit and press
.
5. Select the field you want to edit
(Name or R-Link Number), and press
.
Section 2J: Using Sprint PCS Ready Link
165
6. Edit the entry, press Done ( ), and press Save ( ) to
save your changes.
Editing a Group in Your Personal Group List
To edit a group name:
1. Press R-Link ( ) or press
.
2. Press Go To ( ), then highlight Personal Groups and
press
.
3. Scroll to the group entry you want to edit and press
Options ( ).
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Edit to edit the selected group.
Erase Group to erase the selected group.
New Group to add a new group.
Erase R-Link List to erase the Sprint PCS Ready Link
Ⅲ
Help to view the Sprint PCS Ready Link
instruction page.
4. Highlight Edit and press
.
5. Edit the group name and press
or Done ( ) then
press Next ( ).
If you don’t need to edit the group name, press Done (left
softkey) then press Next (left softkey) during step 5 above and
skip step 6.
Tip:
6. Press Update ( ) to save your changes.
166
Section 2J: Using Sprint PCS Ready Link
7. To edit a group member, scroll to the contact you want
to edit and press Options ( ).
Ⅲ
Edit to edit a group member's name and phone
number.
Ⅲ
Ⅲ
Ⅲ
Erase to erase the group member.
Add New to add a new group member.
Add (Company) to add a new group member from
the Company List (if applicable).
Ⅲ
Ⅲ
Add (Personal) to add a new group member from the
Personal List.
Details to display a summary of the group member
information.
8. Highlight Edit and press
.
9. Select the field you want to edit
(Name or R-Link Number) and press
.
10. Edit the entry, press Done ( ), and press Save ( ) to
save your changes.
11. Press Update ( ) to update your Personal Group List.
Section 2J: Using Sprint PCS Ready Link
167
Erasing Ready Link List Entries
Erasing an Entry in Your Personal List or
Personal Group List
To erase a contact or a group:
1. From the Sprint PCS Ready Link List, press Go To ( ),
then highlight Personal List or Personal Groups and
press
.
2. Scroll to the entry you want to erase and
press Options ( ).
3. Highlight Erase and press
.
Ⅲ
Erase Group appears when you select
Personal Groups.
4. Select Yes and press
.
To erase a group member:
1. From the Sprint PCS Ready Link List, press Go To ( ),
then highlight Personal Groups and press
.
2. Scroll to your desired group and press
to display the
group members.
3. Select the contact you want to erase and
press Options ( ).
4. Highlight Erase and press
5. Select Yes and press
.
.
6. Press Update ( ) to update your Personal Group List.
168
Section 2J: Using Sprint PCS Ready Link
Erasing a Sprint PCS Ready Link List
You can erase all entries saved in the Sprint PCS Ready Link
List (except Company List/Company Groups.).
To erase a Sprint PCS Ready Link List:
1. From the Sprint PCS Ready Link List, press Options ( ).
2. Highlight Erase R-Link List and press
.
3. Select your desired option and press
.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Outgoing Calls to erase all outgoing Sprint PCS
Ready Link calls.
Incoming Calls to erase all incoming Sprint PCS
Ready Link calls.
Missed Calls to erase all missed Sprint PCS
Ready Link calls.
All Calls to erase all Sprint PCS Ready Link call history,
except redial.
All Personal Entries to erase all entries in Personal List
and Personal Groups. You are prompted to enter
your 4-digit lock code.
4. Select Yes and press
.
The Redial number will not be erased.
Tip:
Section 2J: Using Sprint PCS Ready Link
169
Updating Sprint PCS Ready Link Lists
Updating the Company List and Personal List
To update your Company List and Personal List manually through
the Sprint PCS Ready Link server:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select List Update (
).
Managing Sprint PCS Ready Link Settings
Restarting the Ready Link Service
To restart the Sprint PCS Ready Link service:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select Restart Ready Link (
).
170
Section 2J: Using Sprint PCS Ready Link
Setting Ready Link Guard
This feature enables you to display the warning message
when you cannot receive Sprint PCS Ready Link calls. The
warning message will appear when you are launching a Web
or Java application or sending or uploading your pictures.
To set the Ready Link Guard:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select R-Link Guard (
) and press
.
5. Select On and press
. (Select Off to deactivate this
feature.)
Setting Ringer Types for Sprint PCS Ready Link Calls
Your Sprint PCS Phone provides a variety of ringer types that
allow you to customize your ringer and volume settings.
To select a ringer type for Sprint PCS Ready Link calls:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
4. Select Sounds (
5. Select Tones (
).
).
).
6. Scroll to your desired ringer type and select Save ( ).
To hear the selected ringer, press Play ( ).
Ⅲ
Section 2J: Using Sprint PCS Ready Link
171
Setting an Alert Notification for Sprint PCS
Ready Link Calls
Your Sprint PCS Phone can alert you with an audible tone
when you receive a Sprint PCS Ready Link call.
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select Sounds (
).
5. Select Notifications (
).
6. Select Once or Repeat and press
. (Select Off to
deactivate the alert.)
You can also set alerts using the Alert Notification menu.
Tip:
Setting the Speaker Phone for Sprint PCS
Ready Link Calls
You can set the speaker phone on or off when a Sprint PCS
Ready Link call is activated. By default, the speaker phone is
set to on.
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select Speaker Phone (
).
5. Select On or Off and press
.
If the phone’s ringer volume is set to Vibrate, Ringer off, or
Silence All, the speaker phone turns off. Press Speaker to turn
the speaker phone mode on.
Note:
172
Section 2J: Using Sprint PCS Ready Link
Setting the Default View of the Sprint PCS
Ready Link List
You can select the default Sprint PCS Ready Link List when
Sprint PCS Ready Link is launched.
To select the default view of the Sprint PCS Ready Link List:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select Ready Link (
).
4. Select Default View (
). (The default setting is
Personal List.)
5. Select your desired list and press
.
Section 2J: Using Sprint PCS Ready Link
173
174
176
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to your Sprint PCS Phone are
automatically transferred to your voicemail, even if your
phone is in use or turned off. Therefore, you will want to set
up your Sprint PCS Voicemail and personal greeting as soon
as your phone is activated.
To set up your voicemail:
1. Press and hold
.
2. Follow the system prompts to:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Create your pass code
Record your greeting
Record your name announcement
Choose whether or not to activate One-Touch
Message Access (a feature that lets you access
messages simply by pressing and holding
,
bypassing the need for you to enter your pass code).
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends you enable your
voicemail pass code.
Note:
178
Voicemail Notification
There are several ways your Sprint PCS Phone alerts you of a
new message:
ⅷ
ⅷ
ⅷ
ⅷ
By displaying
at the top of your screen.
By displaying a message on the screen.
By sounding the assigned ringer type.
By the LED blinking red.
New Voicemail Message Alerts
When you receive a new voice message, your phone alerts
you and prompts you to call your voicemail.
To call your voicemail:
ᮣ
Press and hold
To display your missed calls:
Press the navigation key up.
.
ᮣ
When you are roaming off the Nationwide Sprint
PCS Network, you may not receive notification of
new voicemail messages. It is recommended that
you periodically check your voicemail by dialing
1 + area code + your Sprint PCS Phone number.
When your voicemail answers, press (*) and enter
your pass code. You will be charged roaming rates
when accessing voicemail while roaming off the
Nationwide Sprint PCS Network.
Important
Your phone accepts messages even when it is turned off.
However, you are only notified of new messages when your
phone is turned on and you are in a Sprint PCS Service Area.
Note:
179
Retrieving Your Voicemail Messages
You can review your messages directly from your Sprint PCS
Phone or from any other touch-tone phone. To dial from your
Sprint PCS Phone, you can either speed dial your voicemail or
use the menu keys.
Using One-Touch Message Access
ᮣ
Press and hold
voicemail box.)
. (Your phone will dial your
Using the Menu Keys on Your Phone to Access Your Messages
1. Press Menu (
) to access the main menu.
).
).
2. Select Messaging (
3. Select Voicemail (
4. Select Call Voicemail (
) to listen to your messages.
You are charged for airtime minutes when you are accessing
your voicemail from your Sprint PCS Phone.
Note:
Using a Phone Other Than Your Sprint PCS Phone to
Access Messages
1. Dial your Sprint PCS Phone number.
2. When your voicemail answers, press the Asterisk (*) key.
3. Enter your pass code.
When you call into voicemail, you first hear the header
information (date, time, and sender information) for the
message. To skip directly to the message, press 4 during the
header.
Tip:
180
Voicemail Button Guide
Here’s a quick guide to your keypad functions while listening
to voicemail messages. For further details and menu options,
Date/Time Send Reply Advance
Replay
Erase
Rewind
CallBack
Help
Forward
Save
Cancel
Skip
Voicemail Options
Your Sprint PCS Phone offers several options for organizing
and accessing your voicemail.
Using Expert Mode
Using the Expert Mode setting for your personal voicemail
box helps you navigate through the voicemail system more
quickly by shortening the voice prompts you hear at each
level.
To turn Expert Mode on or off:
1. Press and hold
to access your voicemail. (If your
voicemail box contains any new or saved messages,
press
to access the main voicemail menu.)
2. Press
to change your Personal Options, following
the system prompts.
3. Press
for Expert Mode.
4. Press
to turn Expert Mode on or off.
181
Setting Up Group Distribution Lists
Create up to 20 separate group lists, each with up to
20 customers.
1. Press and hold
to access your voicemail. (If your
voicemail box contains any new or saved messages,
press
to access the main voicemail menu.)
2. Press
to change your Personal Options, following
the system prompts.
3. Press
for Administrative Options.
for Group Distribution Lists.
4. Press
5. Follow the voice prompts to create, edit, rename, or
delete group lists.
Sprint PCS Callback
Return a call after listening to a message without
disconnecting from voicemail.
ᮣ
Press
after listening to a message. (Once the call is
complete, you’re returned to the voicemail main menu.)
Voicemail-to-Voicemail Message
Record and send a voice message to other Sprint PCS
Voicemail users.
1. From the main voicemail menu, press
to send a
message.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record and send your voice
message.
182
Voicemail-to-Voicemail Message Reply
Reply to a voice message received from any other Sprint PCS
Voicemail user.
1. After listening to a voice message, press
.
2. Follow the voice prompts to record and send your reply.
Voicemail-to-Voicemail Message Forwarding
Forward a voice message, except those marked “Private,” to
other Sprint PCS Voicemail users.
1. After listening to a message, press
.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record your introduction
and forward the voice message.
Voicemail-to-Voicemail Receipt Request
Receive confirmation that your voice message has been
listened to when you send, forward, or reply to other
Sprint PCS users.
1. After you have recorded a message, press
indicate you are satisfied with the message you
recorded.
to
2. Press
to mark receipt requested.
3. Press
to send your voicemail message.
Continue Recording
When leaving a voice message, you can choose to continue
recording even after you’ve stopped.
ᮣ
Before pressing
to indicate that you are satisfied
with the message you recorded, press
recording.
to continue
183
Extended Absence Greeting
When your phone is turned off or you are off the Nationwide
Sprint PCS Network for an extended period, this greeting can
be played instead of your normal personal greeting.
1. From the main voicemail menu, press
for
Personal Options.
2. Press
for greetings.
to record an Extended Absence Greeting.
3. Press
Clearing the Message Icon
Your phone may temporarily continue to display the message
icon after you have checked your voice and text messages.
To clear the icon from the display screen:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
).
3. Select Voicemail (
4. Select Clear Envelope (
).
184
Voicemail Menu Key
Following the prompts on the voicemail system, you can use
your keypad to navigate through the voicemail menu. The
following list outlines your phone’s voicemail menu
structure.
Listen
Envelope Information
Reply
Advance 8 Seconds
Replay
Rewind
Forward Message
Erase
Callback
Save
Options
Send a Message
Personal Options
Notification Options
Phone Notification
Numeric Paging to a Sprint PCS Phone
Return to Personal Options Menu
Administrative Options
185
Skip Pass code
Autoplay
Message Date & Time On/Off
Change Pass code
Group Distribution List
Return to Personal Options Menu
Greetings
PersonalGreetings
Name Announcement
Extended Absence Greeting
Return to Personal Options Menu
Expert Mode (On/Off)
Place a Call
Disconnect
186
Using SMS Text Messaging
With SMS Text Messaging, you can use a person’s wireless
phone number to send instant text messages from your
Sprint PCS Phone to their messaging-ready phone – and they
can send messages to you. When you receive a new message,
it will automatically display on your phone’s screen.
In addition, SMS Text Messaging includes a variety of preset
messages, such as “I’m running late, I’m on my way,” that
make composing messages fast and easy. You can also
customize your own preset messages (up to 160 characters)
Composing SMS Text Messages
To compose an SMS Text message:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Send Message (
).
4. Select Text Message and press
5. Select Mobile, Email @, or Contacts and press
6. Enter the number, email address, or select the contact
.
.
and select OK ( ) or press
. (You may include up to
10 recipients per message.)
7. Select Next ( .)
187
8. Compose a message using one of the following
methods:
Ⅲ
To type a message, use your keypad to enter your
message. Use to select a character input mode.
Ⅲ
To use a preset message, a recent message, or an
emoticon select Options ( ) and select
Preset Msg (
), Recent Msg (
), or
Emoticons (
). Press the number on the keypad
that corresponds to the number next to the
message or emoticon.
9. Select Next ( ).
10. Review your message and press Send ( ). (You may
also select the following additional messaging options
by pressing Options ( ):
Ⅲ
Edit to edit the existing message before sending.
Ⅲ
Priority to set the message priority level
[Normal or Urgent].
Ⅲ
Ⅲ
Call Back # to set the callback number
Save to Drafts to save the message without sending.
188
Accessing SMS Text Messages
To read an SMS Text message:
ᮣ
When you receive a text message, it will automatically
appear on your phone’s main display screen. Use your
navigation key to scroll down and view the entire
message.
To reply to an SMS Text message:
1. While the message is open, select Reply ( ).
2. Compose your reply or use the preset or recent
messages or icons.
Ⅲ
To type a message, use your keypad to enter your
message. Use to select a character input mode.
Ⅲ
To use a preset message, a recent message, or an
emoticon, select Options ( ) and select
Preset Msg (
), Recent Msg (
), or
Emoticons (
). Press the number on the keypad
that corresponds to the number next to the
message or emoticon.
3. Select Next ( ).
4. Review your message and press Send ( ). (You may
also select the following additional messaging options
by pressing Options [ ]:
Ⅲ
Edit to edit the existing message before sending.
Ⅲ
Priority to set the message priority level
[Normal or Urgent].
Ⅲ
Ⅲ
Call Back # to set the callback number
Save to Drafts to save the message without sending.
189
Using Preset (Canned) Messages
Preset messages make sending text messages to your friends,
family, and co-workers easier than ever.
To add and/or edit preset messages:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Settings (
).
4. Select Preset Messages (
).
5. Highlight an empty location and select Add New ( ).
– or –
Highlight a message you wish to edit and select
Edit ( ).
6. Enter your new message or changes and select
You may also add or edit preset messages in the “My Online
Note:
190
Voice SMS Messaging
Voice SMS allows you to send a recorded message to any
other mobile phone or email address instantly. This allows
you to send a recorded message to others without having to
make a voice call.
To send a Voice SMS message:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
).
3. Select VoiceSMS (
4. Select Options ( ) and press
5. Enter the Mobile number, Email @ address or select the
desired contact and press . (Repeat step until all
for Compose New.
recipients [up to 10] have been added.)
6. Select Next ( ).
7. Begin recording your message after the beep. To pause
recording, press
finished, press
. Press
again to resume. When
for Done.
8. Select Send ( ).
9. Enter a name using the keypad to identify yourself and
select Done ( ).
Step 9 is only required on the first message to identify the
sender. Once the “From Name” information is saved, it can be
changed in the messaging settings.
Note:
191
10. Select Save ( ).
11. Select Continue ( ) to connect to Sprint PCS Vision
Services and send the message.
Using Caller ID
Caller ID allows people to identify a caller before answering
the phone by displaying the number of the incoming call. If
you do not want your number displayed when you make a
call, just follow these easy steps.
To block your phone number from being displayed for a specific
outgoing call:
1. Press
2. Enter the number you want to call.
3. Press
.
.
To permanently block your number, call Sprint Customer
Service.
192
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming
calls by sounding two beeps. Your phone’s screen informs you
that another call is coming in and displays the caller’s phone
number (if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
ᮣ
Press
answers the second call.)
To switch back to the first caller:
. (This puts the first caller on hold and
ᮣ
Press
again.
For those calls where you don’t want to be interrupted, you
can temporarily disable Call Waiting by pressing *70 before
placing your call. Call Waiting is automatically reactivated
once you end the call.
Tip:
193
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the
same time. When using this feature, the normal airtime rates
will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press
2. Once you have established the connection, enter the
second number you wish to call and press . (This
.
puts the first caller on hold and dials the second
number.)
3. When you’re connected to the second party, press
again to begin your three-way call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the
call and are the first to hang up, all three callers are
disconnected.
Call Waiting and Three-Way Calling are not available while
roaming off the Nationwide Sprint PCS Network.
Note:
194
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to
another phone number – even when your phone is turned off.
You can continue to make calls from your phone when Call
Forwarding is activated.
To activate Call Forwarding:
1. Press
.
2. Enter the area code and phone number to which your
future calls should be forwarded.
3. Press
. (You will hear a tone to confirm the
activation of Call Forwarding.)
To deactivate Call Forwarding:
1. Press
.
2. Press
. (You will hear a tone to confirm the
deactivation.)
You are charged a higher rate for calls you have forwarded.
Note:
Viewing Missed Events
Missed events is a simple way of viewing all missed calls,
missed tasks, scheduler events, etc. A list is displayed on-
screen that allows you to scroll through all the events using
the navigation key.
To view missed events:
ᮣ
From the standby screen, press the navigation key up to
view the Missed Events screen.
195
196
Section 3B
Sprint PCS VisionSM
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Sprint PCS VisionSM brings you clarity you can see and hear
with advanced multimedia services. These features –
including Sprint PCS Messaging, games, downloadable
ringers and screen savers, and portable Web access – are easy
to learn and use. Clearly, it’s a whole new way to look
at wireless.
This section introduces these advanced services and walks
you through the necessary steps to start taking advantage of
Sprint PCS Vision Services.
Section 3B: Sprint PCS Vision
197
Sprint PCS Vision Applications
Here is a brief list of the applications available through your
Sprint PCS Vision Phone. For more information, please see the
Sprint PCS Vision User Guide online at www.sprint.com.
Messaging Send and receive emails and chat on
your Sprint PCS Vision Phone.
Games Play exciting games with full-color graphics,
sound, and vibration. Choose from over 250 games
to play anytime.
Ringers Personalize your Sprint PCS Vision Phone by
downloading and assigning different ringers to
numbers in your contact list.
Screen Savers Download unique images to use as
screen savers – or make it easy to tell who’s calling
by assigning specific images to numbers in your
contact list.
Web Experience full-color graphic versions of
popular Web sites from your Sprint PCS
Vision Phone.
198
Section 3B: Sprint PCS Vision
Getting Started With Sprint PCS Vision
With your Sprint PCS Vision Phone and Sprint PCS Service,
you are ready to start enjoying the advantages of Sprint PCS
Vision. This section will help you learn the basics of using
your Sprint PCS Vision services, including managing your
User name, launching a Vision connection, and navigating
the Web with your Sprint PCS Vision Phone.
Your User Name
When you buy a Sprint PCS Vision Phone and sign up for
service, you're automatically assigned a User name, which is
typically based on your name and a number, followed by
“@sprint.com.” (For example, the third John Smith to sign up
for Sprint PCS Vision services might have [email protected]
as his User name.)
When you use Sprint PCS Vision services, your User name is
submitted to identify you to the Nationwide Sprint PCS
Network. The User name is also useful as an address for
Sprint PCS Mail, as a way to personalize Web services, and
as an online virtual identity.
Your User name will be automatically programmed into your
Sprint PCS Vision Phone. You don't have to enter it.
Section 3B: Sprint PCS Vision
199
Finding Your User Name
If you aren't sure what your Sprint PCS Vision User name is, you
can easily find it online or on your Sprint PCS Vision Phone.
To find your User Name:
ⅷ
Sprint PCS Phone number and Password. To display your
User name, click on the My Personal Information menu,
then click on PCS Vision User Name.
ⅷ
On your Sprint PCS Vision Phone. You can find your User
name under the Phone Info option in your phone's Settings
menu (Menu > Settings > Phone Info> Phone Number).
Launching a Sprint PCS Vision Connection
To launch a Sprint PCS Vision connection:
1. Press Menu (
) to access the main menu.
2. Select Web (
). (Your Sprint PCS Vision connection will
launch and the Sprint PCS Vision home page will display.)
The Sprint PCS Vision Home Page
OK (right softkey) to continue and launch the Web.
Note:
200
Section 3B: Sprint PCS Vision
If you had a previous Sprint PCS Vision connection, the last
page you visited will display when you launch your browser.
When this occurs, you may not see the “Connecting...”
message when you launch the session. Though the browser is
open, you are not currently in an active data session - that is,
no data is being sent or received. As soon as you navigate to
another page, the active session will launch and you will see
the “Connecting...” message.
Net Guard
When you first connect to the Web, the Net Guard will appear
to confirm that you want to connect. This feature helps you
avoid accidental connections. You can disable the Net Guard
in the future by selecting Always Auto-Connect when the Net
Guard is displayed.
To change your Net Guard settings:
1. Press Menu (
) to access the main menu.
).
2. Select Settings (
3. Select PCS Vision (
).
).
4. Select Net Guard (
Ⅲ
On to activate the Net Guard.
Off to deactivate the Net Guard.
Ⅲ
When enabled, the Net Guard appears only once per session.
The Net Guard does not appear if the phone is merely
re-connecting due to a time-out.
Note:
Section 3B: Sprint PCS Vision
201
Sprint PCS Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
Sprint PCS Vision connection through indicators which appear
at the top of the screen. The following symbols are used:
Your Sprint PCS Vision connection is active (data is
being transferred); the transmit/receive symbol will
blink to indicate data transmission. Incoming voice
calls go directly to voicemail; outgoing voice calls can
be made, but the Sprint PCS Vision connection will
terminate.
Your Sprint PCS Vision connection is dormant (no data
is being sent or received). Though not currently active,
when dormant the phone can restart an active
connection quickly; voice calls can be made and
received.
Your phone is not currently able to access Sprint PCS
Vision service features.
If no indicator appears, your phone does not have a current
Sprint PCS Vision connection. To launch a connection, see
Navigating the Web
Navigating through menus and Web sites during a Sprint PCS
Vision session is easy once you've learned a few basics. Here
are some tips for getting around:
Softkeys
During a Sprint PCS Vision session, the bottom line of your
phone's display contains one or more softkeys. These keys are
shortcut controls for navigating around the Web, and they
correspond to the softkey buttons directly below the phone’s
display screen.
202
Section 3B: Sprint PCS Vision
Depending on which Web sites you visit, the labels on the
softkeys may change to indicate their function.
Tip:
To use softkeys:
Press the desired softkey button. (If an additional
ᮣ
pop-up menu appears when you press the softkey
button, select the menu items using your keypad [if
they’re numbered] or by highlighting the option and
pressing
.)
Scrolling
As with other parts of your phone's menu, you'll have to scroll
up and down to see everything on some Web sites.
To scroll line by line through Web sites:
ᮣ
Press the navigation key up and down.
To scroll page by page through Web sites:
Press the volume buttons on the side of the phone.
ᮣ
Selecting
Once you've learned how to use softkeys and scroll, you can
start navigating the Web.
To select on-screen items:
ᮣ
Use the navigation key to highlight the desired item,
then press the desired softkey button (or press ).
You’ll find that the left softkey is used primarily for selecting
items. This softkey is often labeled “OK.”
Tip:
If the items on a page are numbered, you can use your keypad
(number keys) to select an item. (The tenth item in a
numbered list may be selected by pressing the 0 key on your
phone’s keypad, even though the number 0 doesn’t appear
on the screen.)
Section 3B: Sprint PCS Vision
203
Links, which appear as underlined text, allow you to jump to
different Web pages, select special functions, or even place
phone calls.
To select links:
ᮣ
Highlight the link and press the appropriate softkey.
Going Back
To go back one page:
ᮣ
Press the
key on your phone.
The BACK key is also used for deleting text (like a BACKSPACE
key) when you are entering text.
Note:
Going Home
To return to the Sprint PCS Vision home page from any other
Web page:
ᮣ
Press and hold
– or –
.
ᮣ
Press Menu (
) and select Home (
).
204
Section 3B: Sprint PCS Vision
Sprint PCS Messaging
Accessing Messaging
Now you can send and receive emails and text messages and
participate in Web-based chatrooms right from your
Sprint PCS Vision Phone. Messaging allows you to stay
connected to friends, family, and co-workers 24 hours a day
anywhere on the Nationwide Sprint PCS Network.
Message Types
There are many ways to message from your phone. These
Email, and Chat.
(Sprint PCS Voicemail provides voicemail-to-mailbox
messaging. For information on using your phone’s voicemail
Accessing Sprint PCS Mail
Sprint PCS Mail allows you to perform many of the typical
email functions from your Sprint PCS Vision Phone that you
can from your personal computer. You can manage your
Sprint PCS Mail account from your Sprint PCS Vision Phone or
To access Sprint PCS Mail from your phone:
1. Press Menu (
) to access the main menu.
2. Select Messaging (
).
3. Select Email (
). (If you’re a first-time user, your
phone will prompt you to set up your Sprint PCS Mail
account by establishing a User name and password.)
Section 3B: Sprint PCS Vision
205
4. Select the folder you wish to view, such as Inbox (
or Compose (
).
)
For information and instructions about reading, replying to,
and composing Sprint PCS Mail, please see the Sprint PCS
Accessing Additional Email Providers
With Sprint PCS Vision, you can use popular email services
such as AOL® Mail, Yahoo!® Mail, MSN Hotmail and
EarthLink® to keep in touch, even while you’re on the go.
To access email providers from your Sprint PCS Vision Phone:
1. From the Sprint PCS Vision home page, select
Messaging (
).
).
2. Select Email (
3. Select an email provider, such as PCS Mail, AOL Mail,
MSN Hotmail, Yahoo! Email, or Earthlink.
4. Use your keypad to enter the required sign-in
information for the selected provider, such as user
name, email address, and/or password, and select
Sign In. (Your mailbox for the selected provider will
display.)
The information required for sign in will vary depending on
the email provider you are accessing.
Note:
5. Follow the on-screen instructions to read, reply to,
compose, send, and manage your email account.
206
Section 3B: Sprint PCS Vision
Accessing Instant Messaging
Sprint PCS Vision also provides you with access to popular
instant messaging (IM) clients, including AOL® Instant
MessengerTM, MSN® Messenger, and Yahoo!® Messenger.
To access instant messaging clients from your Sprint PCS
Vision Phone:
1. From the Sprint PCS Vision home page, select
Messaging (
).
2. Select Instant Messaging (
).
3. Select an email provider, such as AOL Instant Messenger,
MSN Messenger, or Yahoo! Messenger.
4. Use your keypad to enter the required sign in
information for the selected provider, such as user name
and/or password, and select Sign On for AOL and Sign In
for Hotmail and Yahoo. (Your IM screen for the selected
provider will display.)
The information required for sign in will vary depending on
the instant messaging provider you are using.
Note:
5. Follow the on-screen instructions to read, reply to,
compose, send, and manage your IM account.
Section 3B: Sprint PCS Vision
207
Accessing Wireless Chatrooms
Sprint PCS Vision gives you the ability to join wireless
chatrooms from your Sprint PCS Vision Phone, to send text
messages and icons to chatroom participants, or to launch a
one-on-one (private) chatroom.
To access a chatroom from the browser:
1. Press Menu (
) to access the main menu.
).
2. Select Web (
3. Select Messaging (
).
4. Select Chat (
).
5. Select Jumbuck (
). (You will see a disclaimer for
Wireless Chat after entering the room.)
6. Select I agree ( ) to accept the disclaimer.
7. After entering, choose a nickname and select Enter. (The
chat menu will display.)
8. Select a chatroom from the menu (for example,
“Friends” or “Singles”) and press Go ( ) to enter.
9. Once in the chatroom, you may scroll through the
postings to read messages from other chatroom
participants and use your keypad to enter your own
messages.
For information about posting to chatrooms or setting up
one-on-one sessions, please see the Sprint PCS Vision
Note:
208
Section 3B: Sprint PCS Vision
Downloading Premium Services Content
With Sprint PCS Vision and your new Sprint PCS Vision Phone,
you have access to a dynamic variety of Premium Service
content, such as downloadable Games, Ringers, Screen
Savers, and other applications. (Additional charges may
apply.) The basic steps required to access and download
Premium Service content are outlined below.
Accessing the Download Menus
To access the Sprint PCS Vision download menus:
1. Press Menu (
2. Select Downloads (
3. Select the type of file you wish to download (Games,
Ringers, Screen Savers, or Applications) and press
4. Select Get New and press
) to access the main menu.
).
.
.
To access the Sprint PCS Vision download menus from the
Web browser:
1. From the Sprint PCS Vision home page,
select Downloads (
).
2. Select Games (
), Ringers (
), Screen Savers
),
or Applications (
) to go to the corresponding
download menu. (For more information on navigating
Section 3B: Sprint PCS Vision
209
Selecting an Item to Download
You can search for available items to download in a number
of ways:
ⅷ
Featured displays a rotating selection of featured items.
ⅷ
Categories allows you to narrow your search to a general
category, such as Movie/TV Themes for Ringers or College
Logos for Screen Savers. (There may be several pages of
available content in a list. Select Next 9 to view additional
items.)
ⅷ
Search allows you to use your keypad to enter search
criteria to locate an item. You may enter an entire word or
title or perform a partial-word search (for example,
entering “goo” returns “Good Ol’ Boy,” “The Good, the
Bad, and the Ugly,” and “Goofy - Club”).
Downloading an Item
Once you’ve selected an item you wish to download,
highlight it and press
or press OK ( ). You will see a
summary page for the item including its title, the vendor, the
download detail, the file size, and the cost. Links allow you to
view the License Details page, which outlines the price,
license type, and length of license for the download, and the
Terms of Use page, which details the Premium Services Terms
of Use and your responsibility for payment.
To download a selected item:
1. From the information page, select Buy. (The item will
download automatically. When the New Download
screen appears, the item has been successfully
downloaded to your phone.)
If you have not previously purchased an item, you will be
prompted to create your purchasing profile.
Note:
210
Section 3B: Sprint PCS Vision
2. Select an option to continue:
Ⅲ
Select Use ( ) to assign the downloaded item (or
to launch, in the case of a game or application). Your
Sprint PCS Vision session will end and you will be
redirected to the appropriate phone menu screen.
Ⅲ
Ⅲ
Select Shop ( ) to browse for other items to
purchase and download.
Press
to quit the browser and return to
standby mode.
Using My Content Manager
Whether you purchase your Premium Services content from
your Sprint PCS Phone or from your online account management
My Content Manager and may be downloaded to your phone
from there.
My Content Manager is a storage area on the Nationwide
Sprint PCS Network that is assigned specifically to your
account. It allows you to store all of your Premium Service
downloadable files. The files remain in My Content Manager
until their license terms have expired – even after you have
downloaded the content to your phone. This provides you
with a convenient place to access information about your
downloaded files without having to store the information in
your phone’s memory.
To access My Content Manager:
1. From the Sprint PCS Vision home page, select
Downloads (
).
2. Select My Content Manager (
).
Section 3B: Sprint PCS Vision
211
To download purchased content from My Content Manager:
1. From the My Content Manager display (see above),
highlight the item you wish to download and
press
. (The information page for the selected item
will display.)
2. Scroll to highlight Download and press
. (The item
will download automatically. When the New Download
screen appears, the item has been successfully
downloaded to your phone.)
3. Select an option to continue:
Ⅲ
Select Use ( ) to assign the downloaded item (or
to launch, in the case of a game or application). Your
Sprint PCS Vision session will end and you will be
redirected to the appropriate phone menu screen.
Ⅲ
Ⅲ
Select Shop ( ) to browse for other items to
download.
Press
to quit the browser and return to
standby mode.
For complete information and instructions on downloading
Games, Ringers, Screen Savers, and Applications, see the
212
Section 3B: Sprint PCS Vision
The Web
Exploring the Web
With Web access on your Sprint PCS Vision Phone, you can
browse full-color graphic versions of your favorite Web sites,
making it easier than ever to stay informed while on the go.
Follow sports scores and breaking news and weather and
shop on your Sprint PCS Vision Phone anywhere on the
Nationwide Sprint PCS Network.
In addition to the features already covered in this section, the
Sprint PCS Vision home page offers access to these colorful,
graphically rich Web categories, including News, Weather,
Entertainment, Sports, Finance, Travel, Shopping, Tools, and
Business Links, as well as useful management options
including My Account and Search. Many sites are available
under more than one menu – choose the one that's most
convenient for you.
Using the Browser Menu
Navigating the Web from your phone using the Sprint PCS
Vision home page is easy once you get the hang of it. For
details on how to navigate the Web, select menu items, and
Although the Sprint PCS Vision home page offers a broad and
convenient array of sites and services for you to browse, not
all sites are represented, and certain functions, such as going
directly to specific Web sites, are not available. For these and
other functions, you will need to use the browser menu. The
browser menu offers additional functionality to expand your
use of the Web on your Sprint PCS Vision Phone.
Section 3B: Sprint PCS Vision
213
Opening the Browser Menu
The browser menu may be opened anytime you have an
active Sprint PCS Vision session, from any page you are
viewing.
To open the browser menu:
ᮣ
Press the right softkey. (The browser menu will display
in a drop-down list.)
Options available under the browser menu include:
ⅷ
Home Returns the browser to the Sprint PCS Vision home
page.
ⅷ
Forward Returns you to a previously viewed page (after
having used the
key).
ⅷ
ⅷ
Mark this Page Creates a new bookmark for the current
page.
View Bookmarks Allows you to bookmark the current site,
access bookmarked sites, and manage your bookmarks.
ⅷ
ⅷ
Search Launches a Google search.
History Keeps a list of links to your most recently visited
sites. To navigate to a site, highlight it and press
,
then select Connect.
ⅷ
Go to URL. Allows you to navigate directly to a Web site by
entering its URL (Web site address).
ⅷ
ⅷ
ⅷ
Show URL Displays the URL of the page being displayed.
Refresh this page Reloads the current Web page.
About Browser Displays technical information about the
browser, its version, and the encryption version, and
provides links to Certificate Information for the various
components.
ⅷ
Restart Browser Restarts the browser application.
214
Section 3B: Sprint PCS Vision
ⅷ
Preferences Displays the following advanced options:
Ⅲ
Edit homepage URL Allows you to change your
browser’s home page.
Ⅲ
Revert to default homepage Changes the current
homepage back to the default homepage URL.
Ⅲ
Ⅲ
Font Size Allows you to change the font size.
Color Allows you to change the color scheme in the
browser.
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Show Images Allows you to turn on or off images
displayed in the browser.
Cookies Allows you to clear the cookies set in the
browser.
Title Tag Allows you to turn on or off the titles
displayed in the browser.
Send Referrer Allows you to turn on or off the send
referrer.
Creating a Bookmark
Bookmarks allow you to store the address of your favorite
Web sites for easy access at a later time.
To create a bookmark:
1. Go to the Web page you want to mark.
2. Press
to open the browser menu.
3. Select Mark this Page (
).
4. Select Save ( ).
Bookmarking a page does not store the page contents, just its
address.
Note:
Some pages cannot be bookmarked. Whether a particular
Web page may be marked is controlled by its creator.
Section 3B: Sprint PCS Vision
215
Accessing a Bookmark
To access a bookmark:
1. Press
to open the browser menu.
2. Select View Bookmarks (
).
3. Scroll to highlight the bookmark you’d like to access and
select Goto ( ) to go to the Web site (or press the
number corresponding to the bookmark you wish to
access).
Deleting a Bookmark
To delete a bookmark:
1. Press
to open the browser menu.
).
2. Select View Bookmarks (
3. Scroll to highlight the bookmark you’d like to delete and
select Options ( ).
4. Select Delete (
).
5. Select OK ( ) to remove the bookmark.
216
Section 3B: Sprint PCS Vision
Going to a Specific Web site
To go to a particular Web site by entering a URL (Web site address):
1. Press
2. Select Go to URL (
3. Use your keypad to enter the URL of the Web site you
wish to go to and press
4. Press again to go to the Web site.
to open the browser menu.
).
.
Not all Web sites are viewable on your phone.
Note:
Reloading a Web Page
To reload (refresh) a Web page:
1. Press
to open the browser menu.
2. Select Refresh this page (
). (The browser will reload
the current Web page.)
Restarting the Web Browser
If the Web browser appears to be malfunctioning or stops
responding, you can usually fix the problem by simply
restarting the browser.
To restart the Web browser:
1. Press
to open the browser menu.
).
2. Select More (
3. Select Restart Browser (
).
Section 3B: Sprint PCS Vision
217
Sprint PCS Vision FAQs
1. How will I know when my phone is ready for Sprint PCS
Vision service?
Your User name (for example, [email protected]) will
display in the phone number under Phone Info. listing in your
phone’s Settings menu.
2. How do I sign-in for the first time?
You are automatically signed in to access Sprint PCS Vision
services when you turn on your phone.
3. How do I know when my phone is connected to
Sprint PCS Vision services?
Your phone automatically connects when Sprint PCS Vision
service is used or an incoming message arrives. Your phone
will also display the
icon at the top of the screen.
4. Can I make calls and use Sprint PCS Vision services at the
same time?
You cannot use voice and Sprint PCS Vision services
simultaneously. If you receive a call while Sprint PCS Vision
service is active, the call will be forwarded to voicemail. You
can place an outgoing call anytime, but it will interrupt any
in-progress Sprint PCS Vision session.
5. When is my data connection active?
Your connection is active when data is being transferred.
Outgoing calls are allowed; incoming calls go directly to
voicemail. When active, the
phone’s display screen.
indicator flashes on your
218
Section 3B: Sprint PCS Vision
6. When is my data connection dormant?
If no data is received for 10 seconds, the connection goes
dormant. When the connection is dormant, voice calls are
allowed. (The connection may become active again quickly.) If
no data is received for an extended period of time, the
connection will terminate.
7. Can I sign out of data services?
You can sign out without turning off your phone; however,
you will not be able to browse the Web or use other
Sprint PCS Vision services. While signed out, you can still
place or receive phone calls, check voicemail, and use other
voice services. You may sign in again at any time. To sign out,
go to Menu ( ) > Settings (
) > PCS Vision (
) >
Disable Vision ( ) in your phone’s menu.
Section 3B: Sprint PCS Vision
219
220
Section 3C
Sprint PCS Voice CommandSM
In This Section
ࡗ ࡗ ࡗ ࡗ With Sprint PCS, reaching your friends, family, and co-workers
has never been easier – especially when you’re on the go. You
can even listen to Web-based information, such as news,
weather, and sports. Your voice does it all with Sprint PCS
Voice Command.
This section outlines the Sprint PCS Voice Command service.
Section 3C: Sprint PCS Voice Command
221
Getting Started With Sprint PCS
Voice Command
With Sprint PCS Voice Command:
ⅷ
ⅷ
ⅷ
ⅷ
You can store all your contacts’ phone numbers, so you
can simply say the name of the person you want to call.
There’s no need to punch in a lot of numbers, memorize
voicemail passwords, or try to dial while you’re driving.
You can call anyone in your address book – even if you
don’t remember their phone number.
You don’t need to worry about losing your contacts or
address book. This advanced service is network-based, so
if you switch or happen to lose your Sprint PCS Phone, you
won’t lose your contacts or address book.
It’s Easy to Get Started
There are two easy ways to sign up for Sprint PCS Voice
Command:
ᮣ
Sign up when you purchase and activate your phone.
ᮣ
Just dial
from your Sprint PCS Phone to
contact Sprint Customer Service and sign up.
There is a monthly charge for Sprint PCS Voice Command.
222
Section 3C: Sprint PCS Voice Command
Creating Your Own Address Book
You can program up to 500 names into your Sprint personal
address book, with each name having up to five phone
numbers. That’s 2,500 phone numbers, and with the
advanced technology of Sprint PCS Voice Command, you can
have instant access to all of them.
There are four ways to update your address book:
ⅷ
your Sprint PCS Phone Number and password to access a
fully functional Web-based address book to create and
update your contacts.
ⅷ
Use an Existing Address Book. Automatically merge
address books from desktop software applications with
Sprint Sync ServicesSM for no additional charge. Simply
click on the “Click to synchronize” button within your
Sprint PCS Voice Command personal address book at
ⅷ
Use Voice Recordings. Simply dial
and say, “Add
name.” You will then be asked to say the name and
number you want to add to your personal address book.
Your address book can store up to 20 voice recorded
names at once.
ⅷ
Call Directory Assistance. If you don’t have a computer or
Internet access handy, you can have Sprint PCS Directory
Assistance look up phone numbers for you and
automatically add them to your address book. Just dial
and say “Call operator” and we’ll add two names
and all the numbers associated with those names to your
address book for our standard directory assistance charge.
Section 3C: Sprint PCS Voice Command
223
Making a Call With Sprint PCS
Voice Command
To make a call with Sprint PCS Voice Command:
1. Press
and you’ll hear the “Ready” prompt.
2. After the “Ready” prompt, simply say, in a natural voice,
“Call” and the name of the person or the number you’d
like to call. (For example, you can say, “Call Jane Smith at
work,” “Call John Baker on the mobile phone,” “Call 555-
1234,” or “Call Bob Miller.”)
3. Your request will be repeated and you will be asked to
verify. Say “Yes” to call the number or person. (The
number will automatically be dialed.) Say “No” if you
wish to cancel.
Keep in mind that Sprint PCS Voice Command recognizes not
only your voice, but any voice, so that others can experience
the same convenience if they use your phone.
Tip:
224
Section 3C: Sprint PCS Voice Command
Accessing Information Using
Sprint PCS Voice Command
To access information using Sprint PCS Voice Command:
1. Press
.
2. Say “Call the Web” and choose from a listing of
information categories like news, weather, and sports.
– or –
Simply say “Call news room,” “Call the weather,”
“Call Sports Central,” etc.
Sprint PCS Voice Command is not available while roaming off
the Nationwide Sprint PCS Network.
Note:
Section 3C: Sprint PCS Voice Command
225
226
228
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal. If you’re inside
a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching,
a Power Save feature is automatically activated. If your phone is
active, it periodically rechecks service availability; you can also check it
yourself by pressing any key. Anytime the Power Save feature is
activated, a message is displayed on the screen. When a signal is
found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls the
power level. This power can range from 0.006 watts to 0.2 watts in
digital mode.
Knowing Radio Frequency Safety
The design of your Sprint PCS Phone complies with updated NCRP
standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in
updating ANSI’s 1982 standard for safety levels with respect to
human exposure to RF signals. More than 120 scientists, engineers
and physicians from universities, government health agencies and
industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation. In
August 1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by the
National Council of Radiation Protection and Measurements (NCRP).
230
Maintaining Your Phone’s Peak Performance
There are several simple guidelines to operating your phone properly
and maintaining safe, satisfactory service.
ⅷ
Speak directly into the mouthpiece.
ⅷ
Avoid exposing your phone and accessories to rain or liquid spills.
If your phone does get wet, immediately turn the power off and
remove the battery.
ⅷ
Blocking the internal antenna located in the upper right corner
will reduce signal performance.
For the best care of your phone, only Sprint authorized
personnel should service your phone and accessories. Faulty
service may void the warranty.
Note:
231
Maintaining Safe Use of and Access to
Your Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without
a hands-free device) is prohibited in some jurisdictions. Laws vary as
to specific restrictions. Remember that safety always comes first.
Purchase an optional hands-free accessory at your local Sprint
Store, or call the Sprint PCS Accessory Hotline at
Tip:
SM
1-800-974-2221 or by dialing #222 on your Sprint PCS Phone.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, RF signals from wireless phones may affect
inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems and/or entertainment systems in motor
vehicles. Check with the manufacturer or their representative to
determine if these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any equipment
that has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately
shielded from external RF signals.
232
Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Note:
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation
Administration (FAA) regulations require you to have permission from
a crew member to use your phone while the plane is on the ground. To
prevent any risk of interference, FCC regulations prohibit using your
phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off
when in a blasting area or in other areas with signs indicating two-
way radios should be turned off. Construction crews often use
remote-control RF devices to set off explosives.
Turn your phone off when you're in any area that has a potentially
explosive atmosphere. Although it's rare, your phone and accessories
could generate sparks. Sparks can cause an explosion or fire, resulting
in bodily injury or even death. These areas are often, but not always,
clearly marked. They include:
ⅷ
ⅷ
ⅷ
ⅷ
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
ⅷ
Any other area where you would normally be advised to turn off
your vehicle’s engine.
Never transport or store flammable gas, liquid or explosives
in the compartment of your vehicle that contains your phone
or accessories.
Note:
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they
could hurt themselves and others, damage the phone or make calls
that increase your Sprint PCS Invoice.
233
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
ⅷ
Use only Sprint-approved batteries and battery chargers. These
chargers are designed to maximize battery life. Using other
batteries or chargers voids your warranty and may cause damage.
In order to avoid damage, charge the battery only in temperatures
that range from 32° F to 113° F (0° C to 45° C).
ⅷ
ⅷ
Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
ⅷ
ⅷ
ⅷ
ⅷ
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long
period of time.
ⅷ
ⅷ
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of times
before it needs replacing.
Don’t store the battery in high temperature areas for long periods
of time. It’s best to follow these storage rules:
Ⅲ
Less than one month:
-4° F to 140° F (-20° C to 60° C)
Ⅲ
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your nearest
Sprint authorized service center.
Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash
may be prohibited.
Special
Note:
For safety, do not handle a damaged or leaking Li-Ion battery.
Note:
234
Acknowledging Special Precautions and
the FCC Notice
FCC Notice
This phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to stop
using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a
copy of this standard, contact the National Fire Protections
Association, One Batterymarch Park, Quincy, MA 02269,
Attn.: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved
in this document could void your warranty for this equipment and
void your authority to operate this equipment. Only use approved
batteries, antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending or
sitting on it.
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear
a handset on your body, use the Sprint supplied or approved carrying
case, holster or other body-worn accessory. Use of non-Sprint
approved accessories may violate FCC RF exposure guidelines.
For more information about RF exposure, visit the FCC Website at
235
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how much
RF the phone emits. All phone models are tested at their highest value
in strict laboratory settings. But when in operation, the SAR of a
phone can be substantially less than the level reported to the FCC.
This is because of a variety of factors including its proximity to a base
station antenna, phone design and other factors. What is important
to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety.
SAR values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public.
SM
The highest reported SAR values of the Sprint PCS Vision Phone
VI-A820 by Samsung® are:
AMPS mode (Part 22):
Head: 1.460 W/kg; Body-worn: 0.769 W/kg
PCS mode (Part 24):
Head:1.420 W/kg; Body-worn: 0.468 W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number: A3LSPHA820. More information on the
phone's SAR can be found from the following FCC Website:
236
Owner’s Record
The model number, regulatory number and serial number are located
on a nameplate inside the battery compartment. Record the serial
number in the space provided below. This will be helpful if you need
to contact us about your phone in the future.
SM
Model: Sprint PCS Vision Phone VI-A820 by Samsung®
Serial No.:
Phone Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one
or more of the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Phone Guide template version 5A_int (July 2005)
237
238
Section 4B
Manufacturer’s Warranty
In This Section
ࡗ Your Sprint PCS Phone has been designed to provide you with
reliable, worry-free service. If for any reason you have a
problem with your equipment, please refer to the
manufacturer’s warranty in this section.
on the “Terms & Conditions” link at the bottom or call Sprint
Customer Service at 1-888-211-4PCS.
239
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants to the original purchaser (“Purchaser”) that
SAMSUNG's Phones and accessories (“Products”) are free
from defects in material and workmanship under normal use
and service for the period commencing upon the date of
purchase and continuing for the following specified period of
time after that date:
Phone
1 Year
1 Year
Batteries
Leather Case/Pouch/Holster
Game Pad
90Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any
part of Product, including antenna, or cosmetic damage;
(b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed
parts that are scratched or damaged due to normal use;
(d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/
peripheral equipment not furnished or approved by
SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment;
(f) installation, maintenance, and service of Product, or
(g) Product used or purchased outside the United States or
240
Canada. This Limited Warranty covers batteries only if battery
capacity falls below 80% of rated capacity or the battery
leaks, and this Limited Warranty does not cover any battery if
(i) the battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the battery,
(ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is
specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser, any
defective component part of Product. To obtain service under
this Limited Warranty, Purchaser must return Product to an
authorized phone service facility in an adequate container for
shipping, accompanied by Purchaser's sales receipt or
comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers' name
and address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
241
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE
NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
ⅷ
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
ⅷ
ⅷ
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
ⅷ
ⅷ
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME
DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE,
USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
242
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED
BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
243
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE
MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's Product
pricing reflects this allocation of risk and the limitations of
liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
© Sprint Nextel. All rights reserved. No reproduction in whole
or in part without prior written approval. Sprint, the “Going
Forward” logo and other trademarks are trademarks of Sprint
Nextel.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [011604]
244
Index
Numerics
3-Way Calling 194
Contact - Adding an Entry 110
- Adding a Phone Number
Contacts - Editing a Phone
Number 115
Contacts - Editing an Entry
Contacts - Ringer Type 118
A
Abbreviated Dialing 37
Activating Voice Recognition
Alarm Clock 126
Auto-Answer Mode 67
B
Backlight 55
Battery 24–26
Capacity 24
Charging 25
D
Dialing Options 28
Downloads
Sprint PCS Vision 209
Installing 24
C
E
Call Answer Mode 66
Call Forwarding 195
Call Guard 83
ABC Mode 42
Emoticons 43
PresetMessages 43
Recent Messages 43
Prepending a Phone
Number 106
I
Saving a Phone Number
Instant Messaging 207
245
K
Key Functions 15
L
R
Ready Link - See Sprint PCS
Ringer Types 46
M
Making Calls 28
Memo Pad 127
Roaming 79–84
Setting Roam Mode 82
Menu Navigation 86
Messaging - Deleting Old
Messaging - Setting Alerts 59
Messaging - Signature 60
Missed Events - Viewing 195
My Content Manager 211
S
Security Menu 70
Special Numbers 74
Sprint Customer Service 7
Sprint PCS Ready Link 149–
Ready Link Contacts 161
Settings 170
N
Name Dial 140
Net Guard 201
P
Auto-Answer Mode 67
Call Answer Mode 66
Launch Pad 66
Updating Ready Link Lists
Sprint PCS Service
Account Passwords 6
246
Dialing Sprint PCS Services
Voice-Activated Dialing 135
Voicemail
Directory Assistance 8
Operator Services 9
Setting Up 3
Applications 198
Volume 50
W
Web 213–217
My Content Manager 211
Navigating the Web 202
Net Guard 201
Security Features 77
T
Text Greeting 54
Three-Way Calling 194
TTY Use 64–65
Turning Your Phone On and
U
Unlocking Your Phone 71
V
Voice SMS 191
247
|
