SGH-x495 Series
P O R T A B L E T r i - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UVEE5_1.2_WCx495_052705_f4_rev
GH68-06976A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
Ifnecessary,switchoffthephonebyholdingdownthe
key until the power-off image displays.
Remove the battery. To do so:
1. Slide the battery lock toward the top of the phone and
hold it in that position.
2. Lift the battery away, as shown.
6
Activating Your Phone
3. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take
it out of the socket.
Section 1: Getting Started
7
4. Place the battery so that the tabs on the end align with
the slots at the bottom of the phone.
5. Press the battery down until it clicks into place. Make
sure that the battery is properly installed before
switching on the phone.
Charging a Battery
YourphoneispoweredbyarechargeableLi-ionbattery.A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
8
Activating Your Phone
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately
200 minutes.
1. With the battery in position on the phone, remove the
jack cover at the bottom of the phone and plug the
connector of the travel adapter into the jack.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by
pressing the buttons on both sides of the connector (1)
and pulling the connector out (2).
Section 1: Getting Started
9
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning
Low Battery” message repeats at regular intervals on the
display. When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter
the password and press the OK soft key or the key.
The password is preset to “00000000” at the factory. For
further details, see "Change Password" on page 95.
4. If the phone asks for a PIN, enter the PIN and press the
The phone searches for your network and after finding it,
the Idle screen appears. Now, you can make or receive
calls.
10
Setting Up Your Voice Mail
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see "Language"
5. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up
voicemail:
1. In Idle mode, press and hold the
key on the keypad.
You are prompted to enter the password.
2. Follow the voice mail prompts to create a password, a
greeting, and your voice mail greeting.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
YoucanaccessyourVoiceMailbypressingthe
the keypad or by going to the menu. To access Voice Mail
using the menu:
keyon
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
Section 1: Getting Started
11
4. Highlight Call voice mail and press the Select soft key
or the key. Your phone dials the specified voice mail
number.
5. When connected, follow the voice prompts from the
voice mail center.
Changing the Voice Mail Number
YourSIMcardgivesyouthedefaultservicenumberofthe
voice mail center. However, you may need to change the
number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Voice server number and press the Select
soft key or the key.
5. Select the Empty option and press the Select soft key or
the key.
Note: After your phone has been activated by your service provider, the
Empty option will appear as the Voice mail option.
6. Highlight Edit number and press the Select soft key or
the key.
7. After editing the number, press the OK soft key to save
the update.
12
Setting Up Your Voice Mail
You may also select the option to edit the voice mail
name or delete the voice mail number.
8. Press the key to return to Idle mode.
Section 1: Getting Started
13
14
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Understanding the Display Screen
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
15
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significantfeatures.Thefollowinglistoutlinesafewofthe
features included in your phone.
• User friendly, menu driven access to features and options.
• Instant Messaging capability.
• Multimedia capability.
• Organizer feature provides calendar, to-do list, alarms,
calculator, and conversion capability.
View of Your Phone
The following illustrations show the main elements of
your phone:
16
Keys
Keys
The following list correlates to the illustrations.
1. Display area where text and graphics are displayed.
2.
3.
The headset jack is used for the hands-free headset.
Performs the functions indicated by the screen text on
the bottom line of the display.
4. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
In Menu mode, selects a menu function or stores
information that you have entered, such as a name in
the phone or SIM memory.
5. During a call, adjusts the earpiece volume.
In Idle mode with the phone open, adjusts the keypad
tone volume. With the phone closed, turns on the
external display when held down.
6. In Idle mode, accesses voice mail when held down.
7. Enters numbers, letters, and some special characters.
Section 2: Understanding Your Phone
17
8. Enters special characters. Performs various functions.
9. The microphone used during phone calls and voice
memo recordings.
10. Deletes characters from the display.
In Menu mode, returns you to the previous menu level.
11. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
12. In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
In Menu mode, selects the highlighted menu options.
13. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode, the Down key allows you to access the
Phonebook Search menu directly.
When entering text, moves the cursor to the left or right,
depending on which side you push.
14. The earpiece is used to listen to audio from your phone.
15. The external display shows the received signal strength,
the phone battery level, the date and time.
18
Understanding the Display Screen
Understanding the Display Screen
The display has 3 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified
time. For details, see page "Alarm" on page 104.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For
details, see "Call Forwarding" on page 99.
Appears when Alert type is set to vibration.
Section 2: Understanding Your Phone
19
Appears when Silent mode is active.
Appears when Mute is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or openthe phone, thebacklight
comes on. It goes off when no keys are pressed within a
givenperiodoftime,dependingonthesettingintheBack
light menu. The display turns off after one minute to
conserve battery power.
Tospecifythelengthoftime thebacklightisactive, setthe
details.
External Display
Your phone has an external display on the front of the
phone. It indicates when you have an incoming call, a
missed call, or a message. It also alerts you at a specified
for further details. The backlight turns on and the
corresponding icon appears on the external display.
Whenyouclosethephone,thedisplayshowsthedateand
current time on a digital clock.
20
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Log
• Call Records
• Silent Mode
• Selecting Functions and Options
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3: Call Functions
21
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. See "Extra Settings" on
page 97 for further details.
Making an International Call
1. Press and hold the 0 key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the C key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the C key. You can also
enter a missing digit.
3. To clear the whole display, press and hold the C key.
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the call recipient or caller is
To recall any of these numbers:
22
Making a Call
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. To dial the number, press the
key or the key.
Before you dial the number, you also have the following
options:
•
To see details of the number, press the Options soft key and
select Details. Press the Select soft key or the key.
•
To call back the number, press the Options soft key and
select Call back. Press the Select soft key or the key.
The number is dialed.
•
To send a text or picture message to the number, press the
Options soft key and select Send message. Press the
Select soft key or the key.
• To edit the number, press the Options soft key and select
Edit. Press the Select soft key or the key.
• To delete the number, press the Options soft key and select
Delete. Press the Select soft key or the key.
• To delete all of the numbers, press the Options soft key and
select Delete all. Press the Select soft key or the key.
Making a Call from the Phonebook
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called Phonebook.
Once you have stored a number in the Phonebook, you
candialitbypressingafewkeys.Youcanalsoassignyour
Section 3: Call Functions
23
most frequently-used numbers to number keys using the
Speed Dial feature.
For further details about the Phonebook feature, see
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Pressthe key to increasethevolumelevelandthe key
to decrease the level.
InIdlemode, youcanalsoadjustthekeypadtonevolume
using these keys.
Answering a Call
When someone calls you, the phone rings and displays
the incoming call image.
24
Call Log
The caller’s phone number, or name if stored in
Phonebook, displays.
1. If necessary, open the phone. Press the
key or the
Accept soft key to answer the incoming call.
If the Anykey answer option is activated, you can press
any key to answer a call except for the key and the
Reject soft key. For further details about the Anykey
If the Active Flip option is activated, you can answer the
call simply by opening the phone. For further details
Note: To reject an incoming call, press and hold the Volume keys on the left
side of the phone before opening the phone, or press the Reject soft key or
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Log
All incoming, outgoing and missed calls are listed in the
Call Log.
1. To access the Call Log option, press the
key. A list of
calls displays.
Section 3: Call Functions
25
2. Highlight one of the calls and press the Options soft key
or the key. You can use the different options to view
call details, call back, send a message, edit, or delete.
3. To place a call, press the
key.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you have missed displays on the idle
screen and the external display immediately after a call is
missed.
To view a missed call immediately:
1. If the phone is closed, open the phone.
2. Press the View soft key.
The number corresponding to the most recent missed
call displays, if available.
3. To scroll through the missed calls, press the Up or Down
key.
4. To call the number displayed, press the
key.
5. To edit or delete a missed call number, highlight the
number and press the Select soft key or the key. See
procedures below.
Editing a Missed Call Number
To edit a missed call number:
1. Press the Options soft key and select Edit.
26
Call Records
2. Change the number and press the Save soft key or the
key.
3. Select a location (SIM or Phone) and press the Select
soft key or the key.
4. If you saved the number to Phone, highlight a phone
type and press the Select soft key or the key.
5. Enter a name and press the OK soft key or the key.
6. Press the Options soft key to Send message, Assign
speed dial, Edit number or name, Delete entry, or Copy to
SIM or Phone.
Deleting a Missed Call
1. Press the Options soft key or the key.
2. If necessary, press the Up or Down key to highlight the
Delete option.
3. Press the Select soft key or the key.
4. When you receive the Sure to delete? confirmation
message, select the Yes soft key to confirm deletion, or
the No soft key to cancel.
You can press the
Call feature.
key at any time to exit the Missed
Note: You can access the Missed Call feature at any time by selecting the
Missed calls menu.
Call Records
In this menu, you can view:
• missed calls, incoming calls, and outgoing calls.
Section 3: Call Functions
27
• length of your calls.
Note: You can access the call records of incoming, outgoing, and missed
calls by pressing the
key in Idle mode.
Note: The number of call records the phone can store may vary, depending
on your SIM card.
Missed calls
This menu lets you view the 20 most recent calls you
received, but did not answer.
The number and name, if already stored in your
Phonebook, displays with the time and date the call was
received.
Incoming calls
This menu lets you view the 20 most recent calls you
received.
The number and name, if already stored in your
Phonebook, displays with the time and date the call was
received.
Outgoing calls
This menu lets you view the 20 most recent calls you
dialed.
The number and name, if already stored in your
Phonebook, displays with the time and date the call was
made.
28
Call Records
Delete all
This menu allows you to delete all of the records in each
call record separately, or you can delete all of your call
records at one time.
1. Highlight the type of calls you want to delete and press
the Select soft key or the
key to make a check mark.
2. Press the OK soft key to delete the calls.
3. When a confirmation message displays, press the Yes
soft key or
key to confirm.
Call time
This menu lets you view the time log for calls made and
received.
Note: The actual time invoiced by your service provider may vary,
depending on network features, rounding-off for billing purposes, and so
on.
The following time logs are available:
• Last call: shows the length of your last call.
• Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Life time: shows the total length of time for incoming and
outgoing calls. The length of call time must be at least 1
minute to increment this field. This information cannot be
cleared.
• Reset timers: allows you to reset the call timers. You must
first enter the phone password and then press the OK soft key
or
key.
Section 3: Call Functions
29
Note: The password is preset to “00000000” at the factory. To change this
Note: This will not reset the Life time timer option.
Silent Mode
Silent mode is convenient when you wish to prevent the
phone from making noise, in a theater for example.
In Idle mode, press and hold the key until the “Silent
Mode On” message and the Silent mode icon ( ) display.
In Silent mode, instead of sounds, your phone will
vibrate.
To exit and reactivate the previous sound settings, press
and hold the key again until the “Exit Silent Mode”
message appears. The Silent mode icon ( ) no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
andsub-menuallowsyoutoviewandalterthesettingsof
a particular function.
Soft Keys
The roles of the soft keys vary depending on the function
you are currently using. The labels on the bottom line of
thedisplayjustaboveeachkeyindicatetheircurrentrole.
30
Selecting Functions and Options
The following diagram shows the soft key role while in
Idle mode.
Press the right soft key
to access the Ph.Book
menu.
Press the left soft key
for Menu mode.
Selecting Options
To view the various functions and options available and
to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the key.
3. To view the next function or highlight the next option on
a list, press the Down key.
4. To move back to the previous function or option on a list,
press the Up key.
5. To move back up one level in the menu structure, press
the C key or the key.
Section 3: Call Functions
31
6. To exit the menu structure without changing the settings,
press the key.
In some functions, you may be asked for a password or
PIN.EnterthecodeandpresstheOKsoftkeyorthe key.
When you access a list of options, your phone highlights
thecurrentlyactiveoption.If,however,thereareonlytwo
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
Youcanplacethecurrentcallonholdwheneveryouwant.
You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold:
1. Press the Options soft key or the key.
2. If necessary, press the Down key to highlight the Hold
option.
3. Press the Select soft key or the key.
The call has now been placed on hold.
You can reactivate the call whenever you want, by
pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Phonebook.
32
Selecting Functions and Options
2. Press the
key to dial the second call.
The first call is automatically put on hold.
When you have an active call and a call on hold, you may
switchbetweenthetwocalls, changingtheoneonholdto
active and placing the other on hold.
To switch between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivatedsothatyoucancontinueconversingwiththat
person.
When you want to finish, end each call normally by
pressing the
key.
Switching off the Microphone (Mute)
Youcantemporarilyswitchyourphone’smicrophoneoff,
so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key or the key.
2. Use the Navigation keys to highlight the Mute option.
3. Press the Select soft key or the key. The other person
can no longer hear you.
To switch the microphone back on:
1. Press the Opt. soft key or the key.
2. Use the Navigation keys to highlight the Unmute option.
Section 3: Call Functions
33
3. Press the Select soft key or the key. The other person
can hear you again.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key.
2. You will receive the confirmation, Speaker on?
3. Press the Yes soft key.
4. To turn the Speakerphone off, press the Spkr off soft
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmittheDTMF(DualToneMulti-Frequency)tonesof
the keys, which allows you topress keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key or the key.
2. Press the Down key to highlight the Phonebook option
and press the Select soft key or the key.
3. Press the Down key to highlight the Search option and
press the Select soft key or the key.
34
Selecting Functions and Options
The Phonebook entries are listed.
4. Enter the name that you wish to find in the textbox
located below the entries.
If you enter the first few letters of the name, the
Phonebook entries are listed starting with the first entry
matching your input.
5. To view the highlighted entry, press the View soft key or
the key.
For further details about the Phonebook feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress if this service is supported by the network and
you have set the Call waiting menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
To end a call on hold, press the Options soft key or the
key and select the End held call option.
To end the current call, press the
key.
Section 3: Call Functions
35
Making a Multi-Party Call
Amulti-partycallisanetworkservicethatallowsuptosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key or the key and select Join. Press
the OK soft key or the key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the key. Select the Join option and press
the OK soft key or the key.
You can add incoming callers by answering the call and
pressing the Options soft key or the key, and selecting
Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the key and highlight
the Split option. Press the Select soft key or the key.
The list of call participants appears.
2. Highlight the call you wish to speak privately with and
press the Select soft key, the
key, or the key.
36
Selecting Functions and Options
Now you can talk privately to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key or the key and highlight the Join option. Press the
Select soft key or the key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key or the key and highlight
the Split option. Press the Select soft key or the key.
The list of call participants appears.
2. Highlight the call you wish to speak privately with and
press the Select soft key, the
key, or the key.
Now you can talk privately to that person.
3. To drop the other participant that is now on hold, press
the Options soft key or the key and highlight the End
held multiparty option. Press the Select soft key or the
key
The call with that participant ends, but you can continue
to talk to the other participants.
4. When you want to end the multi-party call, close the
phone or press the
key.
Section 3: Call Functions
37
38
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Language for
example, you can access them by pressing the Select
soft key or the key.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down keys.
5. To confirm the chosen setting, press the Select soft key,
or the key.
6. To return to the previous menu level, press the key or
the
key.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Themenuitems,suchasmenus,sub-menus,andoptions,
are numbered and can be accessed quickly by using their
shortcut numbers. For the main menus, you can access
40
Menu Outline
any one of them by pressing the number keys (1 to 9)
corresponding to their location on the screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the 9 key for Settings.
3. Press the 5 key for Language.
4. Press the 1 key for Text language.
The available languages are displayed.
Menu Outline
Thefollowinglistshowsthemenustructureandindicates
the number assigned to each option.
1. Voice messages
2. Call records
2.1 Missed calls
2.2 Incoming calls
2.3 Outgoing calls
2.4 Delete all
2.5 Call time
2.5.1 Last call
2.5.2 Total outgoing
2.5.3 Total incoming
2.5.4 Life time
2.5.5 Reset timers
Section 4: Menu Navigation
41
3. t-zones
3.1 Home
3.2 Favorites
3.3 Go to URL
3.4 Clear cache
4. IM
5. Messages
5.1 Text messages
5.1.1 Create
5.1.2 Inbox
5.1.3 Outbox
5.1.4 Delete all
5.2 Picture messages
5.2.1 Create
5.2.2 Inbox
5.2.3 Outbox
5.2.4 Draft
5.2.5 Delete all
5.3 Browser messages
5.3.1 Inbox
5.3.2 Receive
5.3.3 Delete all
5.4 Voice mail
42
Menu Outline
5.4.1 Call voice mail
5.4.2 Voice server number
5.5 Broadcast*
5.6 Settings
5.6.1 Text messages
5.6.2 Picture messages
5.7 Memory status
5.7.1 Text messages
5.7.2 Picture messages
6. Funbox
6.1 t-zones
6.2 Sounds
6.3 Images
6.4 Games
6.5 Delete all
6.5.1 Sounds
6.5.2 Images
6.6 Memory status
7. Organizer
7.1 Alarm
7.2 Calendar
7.3 Calculator
7.4 To do list
Section 4: Menu Navigation
43
7.5 Voice memo
7.5.1 Record voice
7.5.2 Voice memos
7.5.2 Delete all
7.5.3 Settings
7.5.4 Memory status
7.6 Conversion
7.6.1 Length
7.6.2 Weight
7.6.3 Volume
7.6.4 Area
7.6.5 Temperature
7.7 Timer
7.8 Stopwatch
8. Sound settings
8.1 My MegaTones
8.2 Get More MegaTones
8.3 Ringtones
8.4 Ring volume
8.5 Alert type
8.6 Keypad tone
8.7 Message tone
8.7.1 Text messages
8.7.2 Picture messages
44
Menu Outline
8.8 Power on/off
8.9 Alerts on call
8.0 Extra tones
9. Settings
9.1 Time & Date
9.1.1 Set date
9.1.2 World time
9.1.3 Set time
9.1.4 Time format
9.1.5 Auto update
9.2 Display settings
9.2.1 Wallpaper
9.2.2 Interior display
9.2.3 Backlight
9.2.4 Brightness control
9.2.5 Dialing font color
9.3 Get More Help
9.4 Greeting message
9.5 Language
9.5.1 Text language
9.5.2 Input mode
9.6 Security
9.6.1 PIN check
9.6.2 Change PIN
Section 4: Menu Navigation
45
9.6.3 Phone lock
9.6.4 Change password
9.6.5 Privacy
9.6.6 FDN mode
9.6.7 Change PIN2
9.7 Extra settings
9.8 Reset settings
9.8.1 Sound settings
9.8.2 Phone settings
9.8.3 All settings
9.9 Network services
9.9.1 Call forwarding
9.9.2 Call waiting
9.9.3 Network selection
9.9.4 Caller ID
9.9.5 Band selection
* Shows only if supported by your SIM card.
46
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Using ABC Mode
• Using Symbols
• Using Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
47
Changing the Text Input Mode
Whenusingyourphone,youwilloftenneedtoentertext,
suchaswhenstoringanameinPhonebook,creatingyour
personal greeting or scheduling events on your calendar.
You can enter alphanumeric characters by using your
phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. Press the key once,
twice, three, or four times until it displays.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing the 5 key can enter J, K, or L.
However, the T9 mode automatically compares the series of
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer
keystrokes than the traditional ABC mode.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message.
48
Using T9 Mode
Text input mode
indicator
1. To change the text input mode, press the
2. Highlight the input option that you want and press the
Select soft key or the key.
key.
3. Choose from the following options:
: ABC mode
: T9 mode
: Number mode
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Section 5: Entering Text
49
Example: To enter “Hello” in T9 mode, press the 4,3,5,5, and 6 keys.
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the 0 key or
the Up or Down key to display alternative word choices
for the keys that you have pressed.
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the key and start entering
the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the 0 key to display the alternative
words.
2. When you press the 0 key at the last alternative word,
the display shows Spell on the bottom line. Press the
Spell soft key or the key.
3. Enter the word you want to add using ABC mode. See
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
50
Using ABC Mode
Note: This feature may not be available for some languages.
• To enter periods, hyphens, or apostrophes, press the 1 key. T9
mode applies grammar rules to ensure that correct punctuation
is used.
• To shift case in T9 mode, use the key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the C key. Press and hold the C key to
clear the display.
Using ABC Mode
TousetheABCModeusethe1to0keystoenteryourtext.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
Section 5: Entering Text
51
52
Using Symbols
Using Symbols
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the C key. When the input
field is empty, this key returns the display to the
previous mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the key.
Using Numbers
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Section 5: Entering Text
53
54
Section 6: Understanding Your
Phonebook
Topics Covered
• Finding a Phonebook Entry
• Storing a Number in the Phone’s Memory
• Storing a Number in the SIM Memory
• Dialing a Number from the Phonebook
• Dialing a Number from the SIM Card
• Speed Dialing
• Copying SIM Phonebook Entries to Phone
• Deleting all Phonebook Entries
• Group Settings
• Finding My Own Number
• Checking the Memory Status
• Service Dialing Numbers (SDN)
This section allows you to manage your daily contacts by
storing their name and number in your Phonebook.
Phonebookentriescanbesortedbyname,entry,orgroup.
Section 6: Understanding Your Phonebook
55
Finding a Phonebook Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. At the Idle screen, press the Ph.Book soft key.
2. Highlight the Search option and press the Select soft
key or the
key. You are asked to enter a name.
3. Enter the first few letters of the name.
The Phonebook entries are listed, starting with the first
entry matching your input.
4. To view the highlighted entry, press the View soft key.
5. Press the
key to dial the number, or press the
Options soft key to access the Phonebook entry options.
Storing a Number in the Phone’s Memory
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to New entry by pressing the Up or Down key and
press the Select soft key or the
3. Select the Phone option by pressing the Up or Down key
and press the Select soft key or the key.
4. Select a number type by pressing the Up or Down key,
key.
and press the Select soft key or the
key.
The following types are available:
56
Storing a Number in the Phone’s Memory
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
• E-mail: allows you to enter an e-mail address for the number
entered.
5. Enter the number you want to store and press the Save
soft key or the
key.
6. Enter a name and press the OK soft key or the
key.
For further details about how to enter characters, see
After storing, the phone displays the Phonebook entry
and name you just created.
7. Tab through the options using the Right and Left
Navigation keys to assign the Phonebook entry Group,
Graphic, and Alert settings.
8. To use the entry options, press the Options soft key. The
following options are available:
• Send message: allows you to send a message to the
selected number.
• Assign speed dial: allows you to assign a speed dial
number to the phone number you entered. For more
information, see "Speed Dialing" on page 59.
• Edit number: allows you to edit the number.
• Edit Name: allows you to edit the name.
Section 6: Understanding Your Phonebook
57
• Delete entry: allows you to delete the name and number
from Phonebook. You are asked to confirm that you wish to
delete the name and number by pressing the Yes soft key.
• Copy to SIM: allows you to copy the number to your SIM
card.
9. To return to the Idle screen, press the
key.
Storing a Number in the SIM Memory
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to New entry by pressing the Up or Down key and
press the Select soft key or the
3. Select the SIM memory location, by pressing the Up or
Down key and press the Select soft key or the key.
4. Enter a number you want to store and press the Save
soft key or the key.
5. Enter a name and press the OK soft key or the
key.
key.
For further details about how to enter characters, see
After storing, the phone displays the Phonebook entry
number you just created.
6. To use the entry options, press the Options soft key.
The following options are available:
• Send message: allows you to send a message to the
selected number.
• Assign speed dial: allows you to assign a speed dial
number to the phone number you entered. For more
information, see "Speed Dialing" on page 59.
• Edit number: allows you to edit the number.
58
Dialing a Number from the Phonebook
• Edit Name: allows you to edit the name.
• Delete entry: allows you to delete the name and number
from Phonebook. You are asked to confirm that you wish to
delete the name and number by pressing the Yes soft key.
• Copy to phone: allows you to copy the number to your
phone.
7. To return to the Idle screen, press the
key.
Dialing a Number from the Phonebook
Once you have stored phone numbers in the Phonebook,
youcandialthemeasilyandquicklybyusingthelocation
numbers that were assigned to them in the Phonebook.
Note: If you cannot remember a location number, you must go into the
Search menu in the Phonebook menu to search for the entry by name. For
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the
key.
The location number in the SIM card appears, with the
desired number displayed.
2. You can press the Up or Down key to find other
numbers on the list.
3. Press the Dial soft key, the
key, or the
key when
you have selected the number you want.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, you can set up to 8 speed dial entries and
Section 6: Understanding Your Phonebook
59
then dial them easily whenever you want, simply by
pressing and holding the associated numeric key.
Setting Up Speed Dial Entries
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to Speed Dial by pressing the Up or Down key
and press the Select soft key or the
key.
3. Select the key to which you wish to assign the speed-
dialing number, from the 2 to 9 keys, and press the
Select soft key or the
key.
Note: Memory location 1 is reserved for your Voice mail server number.
4. Highlight Edit number and press the Select soft key or
the
key.
5. Enter a number or press the Ph.Book soft key to display
entries in the Phonebook.
6. If you pressed the Ph.Book soft key, select an entry from
the Phonebook list and press the View soft key or the
key.
7. Press the OK soft key or the
key.
Copying SIM Phonebook Entries to Phone
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created.
1. At the Idle screen, press the Ph. Book soft key.
2. Highlight Copy all to phone and press the Select soft
key or the
key.
60
Deleting all Phonebook Entries
3. When you receive the Sure to copy all? message, press
the Yes soft key or the
key.
Note: Options are available for phone entries that are not available when
stored to the SIM card. For details, see "Storing a Number in the Phone’s
Deleting all Phonebook Entries
You can delete all of your entries from your phone’s
memory, your SIM card, or both.
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to Delete all by pressing the Up or Down key and
press the Select soft key or the
key.
3. To place a check mark by the memory location you want
to empty, All, SIM, or Phone, press the Select soft key or
the
You can remove the check mark by pressing the Select
soft key or the key.
key.
4. Press the Delete soft key to delete the entries in the
selected memory location. A confirmation “Sure to
delete?” displays. Press Yes to delete or No to cancel.
Group Settings
1. At the Idle screen, press the Ph.Book soft key.
2. Scroll to Group settings by pressing the Up or Down
key and press the Select soft key or the
key.
3. Scroll through the group list by pressing the Up or Down
key.
Section 6: Understanding Your Phonebook
61
4. When the group you want highlights, press the Select
soft key or the key. You may choose Family, Friends,
Co-workers, VIPs, or Other.
5. Select an option and change the settings, as required.
The following options are available:
• Ringtone: allows you to set the ring tone to be used when
you receive a voice call from a member of that group.
• Edit Name: allows you to rename the selected group setting.
• View Image: allows you to view the graphic displayed when
you receive a voice call from a member of that group.
6. When you are finished, press the C key or the
key.
Finding My Own Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any way affect the actual subscriber numbers on your
SIM card.
1. At the Idle screen, press the Ph.Book soft key.
2. Select the Own number option by pressing the Up or
Down key and press the Select soft key or the
key.
3. Select a location and press the Select key or the
key.
4. To edit the number, highlight Edit number and press the
Select soft key or the key. Enter the phone number
you want and press the OK soft key or the key.
62
Checking the Memory Status
5. To edit the name, highlight Edit name and press the
Select soft key or the
the OK soft key or the
key. Enter the name and press
key.
6. To delete the number, highlight Delete and press the
Select soft key or the
key. Select Yes to confirm
deletion or No to cancel.
Checking the Memory Status
You can check how many names and numbers are stored
in Phonebook, in both SIM card and the phone memory.
You can also see the capacity of both memories.
1. At the Idle screen, press the Ph.Book soft key.
2. Select the Memory status option by pressing the Up or
Down key. Press the Select soft key or the
key.
3. A total of the numbers stored in the Phone and SIM are
displayed.
4. When you are finished, press the C soft key or the
key.
Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers
include emergency numbers, directory enquiries and
voice mail numbers.
1. At the Idle screen, press the Ph.Book soft key.
2. Select the SDN option by pressing the Up or Down key
and press the Select soft key or the
key.
Section 6: Understanding Your Phonebook
63
3. Scroll through the numbers by using the Up or Down
key.
4. To dial the number displayed, press the Select soft key
or the
key.
Note: This function is available only if it is supported by your service
provider.
64
Section 7: Messaging
Topics Covered
• Types of Messages
• Voice Messages
• Text Messages
• Picture Messages
• Browser Messages
• Voice mail Messages
• Broadcast Messages
• Settings
• Memory Status
• Instant Messaging
This section allows you to send or receive different types
ofmessages.Italsoincludesthefeaturesandfunctionality
associated with messaging.
Section 7: Messaging
65
Types of Messages
Your phone provides the following message types:
• Voice Messages
• Text Messages
• Picture Messages
• Browser Messages
• Voice Mail Messages
• Broadcast Messages (SIM Dependent)
Voice messages
In this menu, you can record a voice message of up to 1
minute and then immediately send it in an MMS
(Multimedia Message Service) message. MMS will be
referred to as Picture Messaging.
Whenyouaccessthismenu,atimerappearsonthescreen.
1. Press the Record soft key to start recording.
2. Record a message by speaking into the microphone.
The display shows the elapsed time and the remaining
time simultaneously.
3. When you are finished, press the Stop soft key or the
key. Or, when the recording time is expired, the display
switches to the next screen.
4. To choose your destination target, highlight one of the
following options and press the Select soft key or the
keys:
66
Voice messages
• Recent log: allows you to select a number or an address
from the 5 last destinations you entered for sending the last
messages.
• Phonebook: allows you to retrieve a number from your
Phonebook.
• Phone number: allows you to enter the phone number you
want.
• E-mail address: allows you to enter the e-mail address of
the recipient.
Note: You can access the following options by pressing the Options soft
key:
• Replay: plays back your voice message.
• Re-record: discards the voice message and enables you to
record another one.
• Send: allows you to send the voice message.
• Default destination: allows you to send the voice message
directly without entering another destination. To select a default
destination, press the Select soft key and select from the
available options.
• Save: saves the voice message and continues to the send
options.
5. Enter a number or an e-mail address and press the OK
soft key, or select a destination from the Phonebook.
6. To select a destination from the Phonebook, highlight
the desired number and press the Select soft key or the
key. Press the Send soft key or the key to send
the message.
Afteryourmessageissent,itissavedintheOutboxinthe
Picture messages menu.
Section 7: Messaging
67
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Create
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. Create your message.
You can create a message using standard Alphabet
characters or special Uni-code characters, depending on
the setting in the Character support menu.
You can enter up to 160 standard Alphabet characters in your message.
When you enter text using Uni-code characters, the maximum number of
characters that can be in a message is reduced to 70.
2. When you finish entering your message, press the
Options soft key. The following options are available:
68
Text Messages
• Send: allows you to send the message. The message is
deleted after sending.
• Text formatting: allows you to format the style of the text.
For the Size attribute, Normal, Large, and Small size are
available. Mode options are Normal, Underline, and
Strikethrough. Bold and Italic options are On or Off. Alignment
options are Left, Center, and Right.
• Add content: allows you to add a picture, melody, or
animation to your message. Select the category of the item to
be added. In each category, you can select from the various
factory-set items or choose an item received from other
sources, such as the Internet or other phones.
Note: When you add media items to a message, the number of characters
you can enter decreases.
• Templates: allows you to apply one of the preset message
templates to the text. Select one of the 4 items stored in the
Templates menu.
• Save message: allows you to save a copy of the message
to the Phone or SIM card.
3. Select Send and press the Select soft key or the key.
4. Enter a number and press the OK soft key.
5. Press the Send soft key or the key.
Note: When the phone fails to send the message, it asks you if you want to
retry. Press the No soft key to confirm. Otherwise, press the Retry soft key
to return to the message screen.
Inbox
Thismessageboxisusedtostoremessagesthatyouhave
received.
Section 7: Messaging
69
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phonebook.
1. Select a text message from the list and press the
Options soft key or the key.
Options available are:
• View: read the text message.
• Text reply: create a new message to reply with.
• Call back: dials the number that sent the text message.
• Delete: deletes the text message.
2. Highlight the View option and press the Select soft key
or the key to read the message contents.
3. To scroll through the contents, press the Up or Down
key.
4. To scroll to the previous or next message, press the Left
or Right key.
While reading a message, you can choose the following
options by pressing the Options soft key:
• Text reply: allows you to send a reply to the sender by sending
a text message.
• Call back: allows you to call the sender.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Forward: allows you to send/resend the message. For further
information about how to send a message, see "Create" on
70
Text Messages
• Select content: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a message.
• Move to Phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
Outbox
This message box isused to store messages that you have
sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. Select a text message from the list and press the
Options soft key.
Options available are:
• View: read the text message.
• Delete: deletes the text message.
• Send: send the text message.
2. Highlight the View option and press the Select soft key
or the key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
4. To scroll to the previous or next message, press the Left
or Right Navigation key.
While reading a message, you can choose the following
options by pressing the Options soft key:
Section 7: Messaging
71
• Delete: allows you to delete the message.
• Save address: allows you to extract the destination number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
• Send: allows you to send/resend the message. For further
information about how to send a message see "Create" on
• Forward: allows you to send/resend the message. For further
information about how to send a message, see "Create" on
• Move to Phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
Delete All
This menu allows you to delete all of the text messages in
eachmessagebox.Youcanalsodeleteallofyourmessages
at one time.
1. To select a text message box to clear, press the Up or
Down key. To delete all of your messages, select All
messages.
2. To place or remove a check mark, press Select soft key
or the key.
3. Press the Delete soft key to delete the marked objects.
4. At the Delete? confirmation, press the Yes soft key.
72
Picture Messages
Picture Messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
deliveryofpersonalmultimediamessagesfromphoneto
phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice, and audio clips. A Picture Messaging message is a
multimedia presentation in a single file. It is not a text file
with attachments.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia files,
suchasphotos,soundsandimagesyoudownloadedfrom
the Internet and voice messages you recorded. This
functionisavailableonlyifitissupportedbyyourservice
provider. Only phones that offer multimedia messaging
features can receive and display multimedia messages.
Create
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. Highlight Subject and press the Add soft key or the
key.
2. Enter the subject of your message and press the OK soft
key or the key.
Section 7: Messaging
73
3. To add a picture, highlight the Picture option and press
the Add soft key or the key.
4. Highlight a photo or image and press the Select soft key
or the key.
5. After the picture appears, press the Add soft key or the
key.
6. To add a sound, highlight the Sound option and press the
Add soft key or the key.
7. Highlight one of the following options and press the
Select soft key or the key.
• Record new: allows you to record a new voice message.
• Voice memos: takes you to the Voice memos folder in your
Organizer to select a voice memo to add.
• Sounds: allows you to select a sound from your Sounds
folder.
8. Highlight a Sound or Voice memo and press the Select
soft key or the key to add the sound to your message.
9. To add a message, highlight Message and press the
Add soft key or the key.
10. Enter your message and press the Opt. soft key or the
key.
11. Highlight the Done option and press the Select soft key
or the key. You may select the Templates option to
add pre-defined phrases.
74
Picture Messages
12. Press the Opt. soft key for the following options:
• Send: sends the Picture Messaging message.
• Preview: allows you to see the message before you send.
• Add page: allows you to add another page for the Picture
Messaging message.
• Page timing: page timing allows you to set how long each
page of the Picture Messaging is displayed. The default time is
5 seconds, maximum 99 seconds.
• Text effect: allows you to change the color, size, and style of
the Picture Messaging text.
• Clear picture/sound/message/subject: allows you to
remove the selected picture, sound, message, or subject.
• Delete page: allows you to delete the page selected.
• Save message: allows you to save the Picture Messaging
message.
To change the text or replace the image or sound with
another one, select a category and press the Opt. soft
key. Depending on the category selected, highlight Clear
picture/sound/message/subject to remove the item.
13. When you have finished creating the message, press the
Opt. key and highlight the Send option. Press the Select
soft key or the key.
14. Choose one of the following options and press the
Select soft key or the key:
• Recent log: allows you to select a number or an address
from the 5 last destinations you entered for sending the last
messages.
• Phonebook: allows you to enter the phone number you
want.
Section 7: Messaging
75
• Phone number: allows you enter a phone number or
choose one from the Ph.Book.
• E-mail address: allows you to enter the e-mail address of
the recipient.
15. Press the Send soft key to send the message. Your
phone sends the message.
Inbox
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging icon.
1. Press the View soft key or the key to view your
message.
If you want to view the message later in the Inbox, press
the Exit soft key.
2. If your message is longer than the display screen, use
the Up or Down key to scroll through the message. If
your message has more than one page, use the Left or
Right key to scroll through the pages.
3. Press the Opt. soft key or the key to access the
following options:
• Reply: allows you to create a message and reply to the
sender.
• Replay: if there are multiple screens to this message, allows
you to replay the message from the beginning.
• Delete: deletes the message.
• Forward: allows you to forward this message to another
destination.
76
Picture Messages
• Call back: allows you to dial the number from which this
message was sent.
• Save content: allows you to save the contents of this
message (picture or sound) to send to another destination in a
different message.
• Save address: allows you to store the address from which
this message was sent. You can also reply to the message
from this option.
• Properties: shows you information about the message, such
as the time and date the message was received, sender’s
e-mail address, phone number or name, message size, priority,
and class.
4. When you are finished, press the
key.
Viewing a Received Message in the Inbox
When you access the Inbox menu, a list of multimedia
messages you received displays along with the message
subjects. The icons on the left tell you the status of the
messages.
Picture Messaging notifications that have been opened.
Picture Messaging notifications that have not been opened.
1. Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to the next page, if it
has more than one, after a specified time.
2. To scroll through the message, press the Up or Down
Navigation key. If the message has more than one page,
you can scroll through the pages by using the Left and
Right Navigation keys.
Section 7: Messaging
77
While viewing a message, you can choose the message
options by pressing the Opt. soft key.
Outbox
When you access this menu, the list of multimedia
messages that you have sent or saved displays. The icons
on the left tell you the status of each message:
Messages sent
Messages currently being sent
Messages your phone couldn’t send
Messages to be sent
Messages deferred
1. Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to the next page, if it
has more than one, after a specified time.
2. To scroll through the message, press the Up or Down
Navigation key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right
Navigation keys.
While viewing a message, you can choose the following
options by pressing the Opt. soft key:
• Delete: allows you to delete the message.
• Replay: allows you to replay the message from the beginning.
• Send: allows you to send/resend the message.
78
Browser Messages
• Properties: shows you information about the message, such as
the time and date, to (recipient number), size, priority, and
class.
Draft
After creating a multimedia message, you can store it in
this message box to be sent at a later time. After creating
your message, select the Save message option.
Delete All
This menu allows you to delete all of the multimedia
messages in each message box separately. You can also
delete all of your messages at one time.
1. To select Picture messages to clear, press the Up or
Down key. To delete all of your messages, select All
Messages.
2. To place or remove a check mark, press the Select soft
key or the key.
3. Press the Delete soft key to delete the marked objects.
4. At the Delete? confirmation, press the Yes soft key.
Browser Messages
This menu allows you to receive web messages from the
server, or to set the phone not to receive Web messages.
The following options are available:
• Inbox: allows you to read the messages received from the web
server.
• Receive: allows you to set whether or not your phone receives
web messages.
• Delete all: allows you to delete all of the web messages.
Section 7: Messaging
79
Voice Mail Messages
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the voice server number obtained from your service
provider. You can then highlight this option and press the
Select soft key or the
key to listen to your messages.
You can connect to the voice server by pressing and holding the
1 key in Idle mode.
• Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Please contact your service provider for further details.
Settings
In this menu, you can set up default text message and
picture message information. The last setting you
accessed is automatically activated for sending
subsequent messages.
Text Messages
• Service center: allows you to store or change the number of
your message center, which is required when sending
80
Settings
messages. You must obtain this number from your service
provider.
• Validity period (SIM dependent): allows you to set the length
of time your text messages are stored at the message center
while attempts are made to deliver them.
• Message type (SIM dependent): allows you to view the type of
message sent.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report (SIM dependent): allows you to activate or
deactivate the report function. When this function is activated,
the network informs you whether or not your message has
been delivered.
• Character support: allows you to select a character encoding
type, either GSM-alphabet, Uni-code, or Automatic. If you
select Automatic, the phone automatically changes the
encoding type from GSM-alphabet to Uni-code when you enter
a Uni-code character.
When you select Uni-code, the maximum number of
characters that can be in a message is reduced to
approximately half. If your recipient’s phone does not
support Uni-code characters, he/she may not be able to
read your message correctly.
Note: If your phone doesn’t have the Character support menu, the phone
provides the Automatic character encoding by default.
Picture Messages
The following options are used to set Send and Receive
settings for Picture messages.
Section 7: Messaging
81
Send Settings
• Priority: you can select the priority level of your messages.
• Validity period: set the length of time your messages are
stored in the message center while the network attempts to
deliver them.
• Delivery after: you can set a delay time before the phone sends
your messages.
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Receive Settings
• Msg. reception: you can set your phone to automatically
receive incoming messages.
• Ads reject: you can set your phone to automatically reject or
receive advertising messages.
• Report allowed: you can set the option to receive a delivery
report.
Memory Status
You can check the amount of the memory being used and
the memory remaining for multimedia messages.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
IM (Instant Messaging)
Instant Messenger (IM) is a way of sending short, simple
messages that are delivered immediately to users online
at that moment.
82
IM (Instant Messaging)
Before using this feature, you need to subscribe to a
messenger service. For further details, contact your
service provider.
Starting your IM
1. Select the messenger service to which you subscribed
using the Left or Right key and press the Select soft key
or the key.
2. Enter your screen name. The name will be displayed on
other people’s phones or PCs.
3. Press the Down key and enter your password to connect
to the service.
4. Press the Options soft key.
5. Highlight the Sign On option and press the Select soft
key or the key to connect to your messenger service.
Using the IM Options
On the sign-on screen of your messenger, press the
Options soft key to access the following options:
• Sign On: allows you to login to your IM account.
• Saved Conversations: shows the records of your connections
to the messenger service.
Section 7: Messaging
83
84
Sound Settings
You can customize various sound settings.
My MegaTones
This menu allows you to select different ringtone
melodies that you have downloaded from the Internet.
Get More MegaTones
This menu allows you to download different ringtone
melodies from the Internet. To enable a downloaded
ringtone, use the My MegaTones option.
Ringtones
This menu allows you to select a ring melody.
You can choose between many different melodies.
Ring Volume
This menu allows you to adjust the ring volume to one of
five levels.
UsetheUpandDownkeysortheVolume keysontheleft
side of the phone to increase or decrease the volume.
Alert Type
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
86
Sound Settings
• Vibration then melody: the phone first vibrates 3 times and
then starts ringing using the ring melody selected in the
Ringtone menu.
Keypad Tone
This menu allows you to select the sound that the phone
will make when you press a key. You may select either
Tone or Beep.
To turn off the sound, select Off.
Message Tone
This menu allows you to set up the ringer for incoming
messages, text messages, and multimedia messages.
Text Message
This menu allows you to select how the phone informs
you that a new text message has been received.
The following options are available:
• Tone: allows you to use one of several message tones.
• Mode: allows you specify how you are informed of any
incoming messages.
• Silent: only the text notification appears; the phone neither
rings nor vibrates.
• Tone: the phone rings using the tone selected under the
Tone option.
• Vibration: the phone vibrates.
• Vibration then tone: the phone vibrates six times then rings
using the selected tone.
• Repetition: allows you to specify how often the phone informs
you of a new message. The following options are available:
Section 8: Changing Your Settings
87
• Once: the phone alerts you to a new message just once at
the time of receipt.
• Periodic: the phone alerts you to a new message every 2
minutes until you open the message.
Picture Message
This menu allows you to select how the phone informs
you that a new multimedia message has been received.
The following options are available:
• Tone: allows you to use one of several message tones.
• Mode: allows you specify how you are informed of any
incoming messages.
• Silent: only the text notification appears; the phone neither
rings nor vibrates.
• Tone: the phone rings using the tone selected under the
Tone option.
• Vibration: the phone vibrates.
• Vibration then tone: the phone vibrates six times then rings
using the selected tone.
• Repetition: allows you to specify how often the phone informs
you of a new message. The following options are available:
• Once: the phone alerts you to a new message just once at
the time of receipt.
• Periodic: the phone alerts you to a new message every 2
minutes until you open the message.
Power On/Off
This menu allows you to select whether or not a melody
sounds when the phone is switched on and off.
To turn off the sound, select Off.
88
Phone Settings
Alerts on Call
Thismenuallowsyoutochoosewhetherornotthephone
informs you when you receive a new message or when
the time for an alarm comes during a call.
The following options are available:
• Off: the phone doesn’t actively alert you to incoming messages
or alarms. It only displays the corresponding notification.
• On: the phone alerts you with a beep and displays the
corresponding notification.
Extra Tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the Select soft key or the
key. A check mark displays in front of the option.
2. To turn a given tone off, press the Select soft key or the
key. The check mark no longer displays in front of the
option.
The following options are available:
• Indicative tones: sets whether or not the phone informs you
when you have made a mistake.
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connect tone: sets whether or not the phone beeps when your
call is connected to the system.
Phone Settings
In this menu, you can customize your phone’s various
settings, such as:
Section 8: Changing Your Settings
89
• Time and Date
• Display settings
• Get More Help
• Greeting message
• Language
• Security
• Extra settings
• Reset settings
• Network services
Time & Date
Thismenuallowsyoutochangethecurrenttimeanddate
displayed. You can alsofind out what time it is in another
part of the word.
The following options are available:
• Set date: allows you to enter the month, day, and year.
• World time: allows you to find out what time it is another part
of world, using the Left and Right Navigation keys.
Note: Before setting the time, you must specify your time zone in the
World time menu.
The screen shows the:
• city name.
• current time and date.
• city selected as your time zone.
To select your time zone:
90
Phone Settings
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times. The
local time and date display.
2. Press the Set soft key or the key.
• Set time: allows you to enter the current time. You can choose
the time format in the Time format menu.
• Time format: allows you to change the time format to 12 hours
or 24 hours.
• Auto update: allows you to receive time information from your
service provider’s network.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu (Menu 9.1.3).
• On: the phone automatically updates the time and date
according to the current time zone using the network
service.
• Confirm first: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date do not change the time you have
set for alarm settings or calendar memos.
Display Settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
Thismenuallowsyoutochangethebackgroundimageor
the color of the text to be displayed in Idle mode.
The following options are available:
Section 8: Changing Your Settings
91
• Animations: you can select a background animation to be
displayed on the idle screen.
• Get More Wallpapers: you can also select any images
downloaded from the Internet, t-zonesSM browser, optional
EasyGPRS program, or received in messages.
• Images: you can select a background image to be displayed on
the idle screen.
• Text color: you can select the color of the text to be displayed
on the idle screen.
If you selected Animations:
1. Scroll through the list by pressing the Left or Right key.
You have various preset images available.
2. Press the Select soft key or the key when the image
you want is displayed.
If you selected Images:
1. Scroll through the list by pressing the Up or Down key.
You have various preset images available.
2. Highlight an image name and press the View soft key or
the key.
3. When the image displays, press the Select soft key or
the key to display it on the idle screen.
Or, you may press the Left or Right key to view other
images.
Interior Display
This menu allows you to select the menu display style.
YoucanchooseeitherPattern1orPattern2.Highlightthe
optionyouwantandpresstheSelectsoftkeyorthe key.
92
Phone Settings
Back Light
In this menu, you can select the length of time the
backlight is on and the phone is in Dimming mode.
Settings available are: 15 seconds, 30 seconds, 1 minute,
3 minutes, and 10 minutes.
Brightness Control
You can adjust the display brightness to see it better in
different lighting conditions.
Select either Main LCD or Front LCD. Press the Up or
Down key or press the Volume keys to adjust the
brightness.
Dialing Font Color
This menu allows you to select the color of your dialing
font. You can choose either Black or Rainbow. Highlight
theoptionyouwantandpresstheSelectsoftkeyorthe
key.
Get More Help
This menu provides accesstoonline help for your phone.
You may browse general help topics, or enter specific
search topics. Information located on this site is
maintained by T-Mobile.
Greeting Message
Thismenuallowsyoutosetatextgreetingtobedisplayed
briefly when the phone is switched on.
For details about entering characters, see "Using ABC
Section 8: Changing Your Settings
93
Language
You can select a display language.
The following options are available:
• Text language (SIM dependent): you can set the text language
to English, French, or Spanish.
• Input mode: you can set the Input mode language to English,
French, or Spanish.
Security
TheSecurityfeatureenablesyoutorestricttheuseofyour
phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is
switched on.
94
Phone Settings
Change PIN
This feature allows you to change your current PIN,
providedthatthePINCheckfeatureisenabled.Youmust
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see "Change Password" on
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when
you switch on the phone.
Change Password
The Change Passwordfeature allows you to change your
currentphonepasswordtoanewone. Youmustenterthe
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
Section 8: Changing Your Settings
95
Privacy
Using this menu, you can lock your media contents, such
as picture messages, voice messages, voice memos,
images, and sounds. Once you have locked the contents,
you must enter the phone’s password to access the
associated menus.
1. To select an item to lock, press the Up or Down key to
highlight the item you want to lock. To lock all of the
contents, highlight All.
2. To place a check mark, press the Select soft key or the
key.
3. To remove a check mark, press the Select soft key or the
key.
4. To lock the marked items, press the OK soft key.
5. Enter a password and press the OK key.
When the phone asks for the password, enter the
password and press the OK soft key or the key.
Note:Thepasswordispresetto“00000000”atthefactory.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. The following options are available:
96
Phone Settings
• Full length entries or wild cards can be entered in to the FDN
list.
• A full length number with a specific contact name can be
entered into the FDN list.
• Wildcard entries allow a range of numbers to be dialed with
a single entry: ex. 555 – All dialed numbers that begin with
555 will be allowed. Numbers that do not match the
conditions in the FDN list will be restricted. Note: Entering
an asterisk (*) is not required for wild card entries.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Extra Settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, press the Select soft key or the
key. A check mark displays in front of the option.
2. To turn a feature off, press the Select soft key or the
key. The check mark no longer displays.
The following options are available:
Note: The interval between call attempts varies.
Section 8: Changing Your Settings
97
• Auto redial: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an unsuccessful
call.
• Active Flip: when this option is checked, you can simply open
the phone to answer a call. When it is unchecked, you must
open the phone and press a key to answer a call, depending on
the setting of the Anykey answer option. See below.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the
key or the
key or the
Reject soft key. To reject the call, press the
Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
Reset Settings
You can easily reset your phone to its default settings.
The following options are available:
• Sound settings: you can reset all sound settings to the default
settings.
• Phone settings: you can reset all phone settings to the default
settings.
• All settings: all settings are changed to the default settings.
To reset your phone:
1. Make a selection of the settings you wish to reset. At the
Confirm screen, press the Yes soft key or the key.
Otherwise, press the No soft key and you will be
returned to the previous screen.
Enterthe4-to8-digitpasswordandpresstheOKsoftkey
or the key.
The password is preset to “00000000.” To change this
password, see "Change Password" on page 95.
98
Phone Settings
Network Services
The Network Services feature allows you to set up the
network functions supported by your carrier. Some of
these services may not be available due to coverage area
orserviceplans.Ifyouhaveanyquestions,pleasecontact
the Customer Support center.
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague while
you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when you are already on another
call.
• No reply: calls are forwarded when you do not answer the
phone.
• Unreachable: calls are forwarded when you are not in an
area covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the Select soft key or the
key.
Section 8: Changing Your Settings
99
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, press the Activate soft key.
Go to step 6.
4. To change the number to be called, press the Change
soft key. Go to step 6.
5. To deactivate call forwarding, press the Remove soft
key.
6. Enter the number to which the calls are to be forwarded
and press the OK soft key or the key.
To enter an international code, press and hold the 0 key
until the + sign displays.
7. When you select No reply in step 1, select the length of
time the network waits for before forwarding a call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call Waiting
Thisnetworkserviceinformsyouwhensomeoneistrying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call
waiting option is to be applied by pressing the Up or
Down key and then press the Select soft key or the
key.
100
Phone Settings
The screen informs you whether call waiting is activated
or deactivated.
2. You can activate or deactivate the Call Waiting feature
using the Activate or Deactivate soft key respectively.
3. To return to the previous screen, press the Exit soft key.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change the Network Selection mode:
1. Highlight the Default setup option then press the Select
soft key or the key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, go to step 2.
2. After scanning the network, the phone will display
available networks. Highlight the network that you want
by pressing the Up or Down key and then press the
Select soft key or the key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Section 8: Changing Your Settings
101
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other
person’s phone.
• Send number: your number is sent each time you make a call.
Band Selection
This menu option provides the ability to set the band for
your phone. Choose from GSM 850/1900, GSM 1800, or
Automatic.
102
Section 9: Organizer
Topics Covered
• Alarm
• Calendar
• Calculator
• To Do List
• Voice memo
• Conversion
• Timer
• Stopwatch
The topics covered in this section allow you to set an
alarm, schedule appointments, view the calendar,
performsimplemathcalculations,createTo-Dolists,send
a voice memo, set a timer, and use a stopwatch.
Section 9: Organizer
103
Alarm
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake-up Call: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
• Auto power: alarm rings at the specified time even if the phone
is turned off. If the option is set to Off and the phone is
switched off at the specified time, the alarm does not ring.
To set the alarm:
1. Choose the type of alarm to be set and press the Select
soft key or the key.
2. Press the Options soft key to choose from the following
options:
• Alarm day: select the days of the week for the alarm.
• Alarm time: enter the time for the alarm.
• Alarm tone: select an alarm melody.
• Remove alarm: removes the set alarm.
3. Highlight Alarm day and press Select soft key or the
key. Select the days that you want the alarm to sound
using the Select soft key. Press the OK soft key to save.
104
Calendar
4. Highlight the Alarm time and press the Select soft key
or the key. Enter the time and press the OK soft key or
the key. Select AM or PM and press the Select soft
key or key.
5. Highlight Alarm tone and press the Select soft key or
the key. Highlight your choice and press the Select
soft key or the key.
6. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time
7. To stop the alarm when it rings, open the phone and
press the Confirm soft key, Volume keys, C key, key,
or
key.
Calendar
With the Calendar feature, you can:
• consult the calendar and check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
Consulting the Calendar
When you select the Calendar menu, the calendar
displays with today’s date highlighted. The following
options are available when you press the Options soft
key:
• Add memo: allows you to write a memo and save it to the
scheduler, to do list, call, or anniversary list.
Section 9: Organizer
105
• Go to date: allows you to jump to a specific date.
• View all: displays all memos set, starting with the oldest,
regardless of the day. To scroll through the memos, press the
Up or Down key.
• Delete day: allows you to delete all memo’s for the specified
day.
• Delete all: allows you to delete all of the memos. You are asked
to confirm your action.
Writing a Memo
You can make up to 100 memos for the calendar. More
than one memo can be made for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation keys.
2. Press the Select soft key or the key.
An empty memo screen displays to allow you to enter
your memo.
3. Enter your memo and then press the OK soft key or the
key.
4. Choose from the following Save to options:
• Scheduler: saves the memo to the Scheduler.
• To do list: saves the memo to the To do list.
• Call: saves the memo to your Call list.
• Anniversary: saves the memo to your Anniversary list.
106
Calendar
5. If you saved to Scheduler or To do list, the Memo time
menu will appear. Enter the time you wish. The time will
default to the present time. Press the OK soft key or the
key.
6. If applicable, select the AM or PM option and press the
Select soft key or the key.
7. You are asked if you wish to set an alarm. If you want the
alarm to ring on the chosen day, press the Yes soft key
or the key.
Otherwise, press the No soft key. The memo is saved.
8. If you pressed the Yes soft key or the key, set the
time for the alarm and press the OK soft key or the
key.
Notes: Your phone is preset to a 12-hour format. To change the time
When the alarm time you set occurs, the alarm rings. To view details about
the memo, press the View soft key or the key. To stop the alarm, press
the Exit soft key, or the
key.
9. If applicable, select the AM or PM option and press the
Select soft key or the key.
10. Select an alarm tone for the alarm and press the Select
soft key.
The color of the date on the calendar changes to pink to
indicate that a memo exists for that date.
Viewing a Memo
When you select a day on which more than one memo
exists, the latest memo for the day displays.
Section 9: Organizer
107
In that case, press the Left or Right key to scroll to the
previous or next memo.
You can access the following options by pressing the
Options soft key:
• Add: allows you to add a new memo for the day.
• Delete: deletes the memo.
• Edit: allows you to change the memo text.
• Move: allows you to change the time or date of the memo.
• Copy: allows you to copy the memo to another date or time.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
key according to the illustration on the display. The
key is used for the decimal.
3. Enter the second number.
4. To view the result, press the key or the = soft key.
Repeat steps 1 through 4 as many times as required.
To Do List
This feature allows you to:
• enter a list of tasks to be done.
Creating the To Do List
1. Select the To do list option and press the Select soft key
108
To Do List
or the key.
2. Enter the first task and press the OK soft key or the
key.
3. Select a date on the calendar using the Navigation keys
and press the Select soft key or the key.
4. Enter a time and press the OK soft key or the key.
5. Highlight AM or PM and press the Select soft key or the
key.
6. At the Set alarm? prompt, press the Yes soft key to set
an alarm. Otherwise, press the No soft key.
7. If you pressed Yes to set an alarm, enter the time, AM or
PM, and the alarm tone.
8. Your To do list will be displayed with the task you just
entered.
9. To exit, press the
key.
Editing the To Do List
When you select the To do list menu option, the current
contents display with a status mark, if the task has been
done , or is undone
.
1. Highlight the task that you wish to edit and press the
Select soft key or key.To change the status of a task,
press the Options soft key and use the Up and Down
keys to select the Mark option. Then press the Select
soft key or key.
Section 9: Organizer
109
2. Use the Up or Down Navigation key to mark the task as
Done or Undo.
By pressing the Options soft key or the key on the list
or the task view, you can access the following options:
• Add: allows you to create a new task.
• Mark: allows you to change the status of the current task to
either Done or Undo.
• Edit: allows you to change the text.
• Move: allows you to move the task to another date.
• Copy: makes a copy of the current task.
• Delete: deletes the current task.
• Delete all: allows you to delete all of the tasks.
Voice Memo
You can record voice memos. After recording, you can
send the memo to other people via the Multimedia
Message Service.
Record Voice
This menu allows you to record a new memo. Recording
time is limited to free memory space available.
1. To start recording, press the Select soft key or the
key.
2. Record a memo by speaking into the microphone.
3. Press the Select soft key or the key to stop the
recording.
4. Press the Options soft key to display the following
options:
110
Voice Memo
• Send: send the voice memo by Picture Messaging.
• Rename: change the name of the voice memo.
• Delete: delete the voice memo.
• Properties: view the properties of the voice memo.
5. To exit, press the key.
Voice Memos
This menu shows a list of saved voice memos. Scroll to a
memoandpresstheSelectsoftkey. Thevoicememowill
play. Press the Options soft key. The following options
are available:
• Send: allows you to send the memo to other people by using
the Picture Messaging feature. See "Creating and Sending a
Multimedia Message" on page 73 for further details about
sending a message.
• Rename: allows you to change the memo’s name.
• Delete: allows you to delete the memo.
• Properties: displays information about the memo, such as the
name, size, and format.
Delete All
In this menu, you can delete all of your voice memos.
When the confirmation message appears, press the Yes
soft key. To cancel the deletion, press the No soft key.
Settings
In this menu, you can view and set the settings for your
voice memos. The following options are available:
• Recording time: allows you to set the recording time to Normal
or Limit size (for Picture Messaging).
Section 9: Organizer
111
• Volume: allows you to set the default volume for the recording.
• Default name: allows you to set the default name for the
recordings.
Memory Status
You can check the amount of memory being used and the
memory remaining for voice memos.
The display shows you the total, used, and free memory,
including the number of memos you have stored and the
total number of memos you can store.
Conversion
The conversion menu provides the following conversion
categories:
• Length
• Weight
• Volume
• Area
• Temperature
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the Start soft key to start the timer. Press the Stop
soft key to stop the timer.
112
Stopwatch
4. To stop the alarm, press the soft key, the C key, or the
key.
Stopwatch
You can use this menu to access the Stopwatch feature.
To enable the Stopwatch:
1. Press the OK soft key to start the stopwatch.
2. After starting the stopwatch, you may press the OK soft
key up to four times to have four different times
displayed. This may be used as a lap counter. The time
displayed at the top of the display is cumulative.
3. Press the Reset soft key to reset all times to zero.
Section 9: Organizer
113
114
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone. For more
information, see "Section 11: t-zones" on page 121.
Sounds
Inthismenu,youcanviewthelistofsoundsdownloaded
fromthe web serveror received in multimediamessages.
You can set a downloaded sound as the current ring tone.
By pressing the Options soft key or the key, you can
access the following options:
• Set as ring tone: allows you to set the sound as your ring tone.
• Rename: allows you to change the name of the sound.
• Delete: allows you to delete the sound.
• Properties: displays the melody name, size, format and
copyright information.
UsingtheGetMoreMegaTonesoptiononthesoundslist,
you can access the web site preset by T-Mobile and
download new sounds.
Using the Get More HiFi Ringers option on the sounds
list, you can access the web site preset by T-Mobile and
download new HiFi Ringers.
116
Images
Images
Inthismenu,youcanviewthelistofimagesdownloaded
from the web server or received in messages. You can set
a downloaded image as the current background image.
Scroll to the image you want to view and press the View
soft key or the key.
By pressing the Options soft key or the key, you can
access the following options:
• Send: allows you to send the image to a phone number or an
email address.
• Set as wallpaper: allows you to set the image as your
wallpaper for the idle screen.
• Rename: allows you to change the name of the image.
• Delete: allows you to delete the image.
• Properties: displays the image name, size, resolution, and
copyright information.
UsingtheGetMoreWallpapersoptionontheimageslist,
you can access the web site preset by T-Mobile and
download new images. Scroll to the Get More
Wallpapers option and press the Connect soft key or the
key.
Games
YoucandownloadMIDlets(Javaapplicationsthatrunon
mobile phones) from various sources using the t-zones
browser and store them in your phone.
When you access the Games menu, the list of default
games appears. Once you have downloaded games, they
are added to the list.
Section 10: Funbox
117
Note: Java services may not be available, depending on your service plan
and phone model.
Downloading a New Game
You can download more games from the web site preset
by T-Mobile using the Get More Games option. Scroll to
the Get More Games option and press the Connect soft
key or the key.
Launching a MIDlet
Note: The procedure explained below is for the default games. For
downloaded games, the procedure may be different.
1. Scroll to the MIDlet you want on the Games list and press
the Options soft key.
2. Highlight Launch and press the Select soft key or the
key.
3. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
Note: The options for each game vary depending on the game.
4. Press the key to confirm your selection.
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the Options soft
key.
2. Highlight the Properties option and press the Select soft
key or the key.
118
Games
The display shows information about the MIDlet, such as
the file size, application version, and its vendor.
3. To scroll to other MIDlet information, press the
Navigation keys.
4. If you want to delete a MIDlet, press the Delete soft key
and then press the Yes soft key or the key to confirm
the deletion.
Note: When you select default games from the list, the Delete option is not
available.
5. To exit and return to the Games list, press the Right soft
key or the C key.
Entering text
If you need to enter text while using a MIDlet, you can
access the following input modes:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter
lower-case English characters.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys,
press the key to insert it.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can change
the case by pressing the 0 key.
Section 10: Funbox
119
To change the text input mode, press the key until the
appropriate indicator appears on the soft key area of the
display.
Delete All
This menu allows you to delete all of the downloaded
items in the Sounds and Images folders separately.
1. Using the Up or Down key, select a folder to clear and
press the Select soft key or the key.
2. To delete the items, press the Yes soft key or the key
at the Delete? prompt. Otherwise, press the No soft key.
Memory Status
You can check the amount of memory being used and
memory remaining for games, picture messages, and
Media box.
120
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage of the Wireless Web
service provider. You can also press the key in Idle
mode to launch the t-zones browser.
The content of the t-zones browser startup homepage
depends on your Wireless Webserviceprovider. Toscroll
through the screen, use the Up and Down keys.
To go to the startup homepage from any other screen in
the t-zones browser, use the Home option. For more
Exiting the t-zones Browser
To exit the browser at any time, simply press the
key.
Navigating the t-zones Browser
1. To scroll through browser items, press the Up or Down
key.
2. To select browser items, press the Select soft key.
3. To return to the previous page, press the Back soft key or
the C key. The Back soft key does not appear until you
have scrolled to the end of the browser items.
122
t-zones
Entering Text in the t-zones Browser
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated on the screen.
The following modes are available:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter
lower-case English characters.
You can enter symbols in upper or lower-case character
mode by pressing the 1 key.
Number mode (1): allows you to enter numbers.
• To change the text input mode, press the
• To enter a space, press the key.
key.
• To edit text, set the cursor to the right of the character(s) to be
corrected.
• Press the C key as required.
• Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using the t-
zones browser to navigate the Wireless Web.
To access a menu option:
1. Highlight the t-zones browser icon and press the Select
soft key. A browser menu displays.
2. Highlight an option using the Up and Down keys then
press the Select soft key or the key.
Section 11: t-zones
123
Note: The menus may vary, depending on your version of the t-zones
browser.
The following options are available:
• Go to URL: allows you to manually enter the URL address of a
Web page. After entering an address, press the OK soft key or
key to go there directly.
• Favorites: shows the bookmarks list. You can bookmark the
current web page or access previously bookmarked pages.
• Text messages: allows you to create a text message or check
your Inbox or Outbox.
• Funbox: allows you to see the sounds and images stored on
your phone.
• Home: takes you back at any time to the home page of the
Wireless Web service provider.
• Back: takes you back to the previous web browser screen.
• Show URL: displays the URL address of the Web page to which
you are currently connected. It also enables you to set the
current site as the startup home page.
• Reload: reloads the current page.
Favorites
This menu stores up to 15 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or
the key.
2. Enter the address and press the OK soft key or the
key.
124
t-zones
3. Enter a name for the favorite item and press the OK soft
key or the key.
After saving a favorite item, you can select the item and
access the following options by pressing the Select soft
key or the key:
• Go: takes you to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address.
Go to URL
ThismenuallowsyoutomanuallyentertheURLaddress
ofawebsitethatyouwishtoaccess.Entertheaddressand
press the OK soft key or the key.
Clear Cache
Youcancleartheinformationstoredinthecache,whichis
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key at the Sure to clear? prompt to
confirm the deletion. Otherwise, press the No soft key.
Section 11: t-zones
125
126
Section 12: Health and Safety
Information
Topics Covered
• Health and Safety Information
• Consumer Information on Wireless Phones
• Road Safety
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability Of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safely use your phone.
Section 12: Health and Safety Information
127
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressedinunitsofwattsperkilogram(W/kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
128
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands.AlthoughtheSARisdetermined
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue.Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.3 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 12: Health and Safety Information
129
• Head: 1.36 W/Kg.
• Body-worn: 0.727 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile,"or"PCS"phones.Thesetypesofwirelessphones
canexposetheusertomeasurableradiofrequencyenergy
(RF)becauseoftheshortdistancebetweenthephoneand
theuser'shead.TheseRFexposuresarelimitedbyFederal
Communications Commission safety guidelines that
weredevelopedwiththeadviceofFDAandotherfederal
health and safety agencies. When the phone is located at
130
Consumer Information on Wireless Phones
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produceRFexposureswellwithintheFCC'scompliance
limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
wheninthestand-bymode.WhereashighlevelsofRFcan
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RFexposureshavenotfoundanybiologicaleffects.Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch.Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
Section 12: Health and Safety Information
131
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
132
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. Other studiesexposed theanimals toRF for up
Section 12: Health and Safety Information
133
to22hoursperday.Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
Acombinationoflaboratorystudiesandepidemiological
studies of people actually using wireless phones would
providesomeofthedatathatareneeded.Lifetimeanimal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
datathatisdirectlyapplicabletohumanpopulations,but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
134
Consumer Information on Wireless Phones
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld.TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 12: Health and Safety Information
135
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdatadonotdemonstratethatwireless
phonesareharmful.ButifyouareconcernedabouttheRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers.Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
136
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
theUnitedKingdomdistributedleafletscontainingsuch
arecommendationinDecember2000.Theynotedthatno
evidence exists that using a wireless phone causes brain
tumorsorotherilleffects.Theirrecommendationtolimit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 12: Health and Safety Information
137
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks.Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone.Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
anddefibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
138
Consumer Information on Wireless Phones
voluntary standard sponsored by the Institute of
ElectricalandElectronicEngineers(IEEE).Thisstandard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Section 12: Health and Safety Information
139
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
140
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your Phonebook takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
Section 12: Health and Safety Information
141
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association
Operating Environment
Remember to follow any special regulations in force in
any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
142
Using Your Phone Near Other Electronic Devices
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Section 12: Health and Safety Information
143
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aidmanufacturer todiscuss
alternatives.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switchyourphoneoffinhealthcarefacilities
whenanyregulationspostedintheseareasinstructyouto
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
require you to do so.
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosiveatmosphereandobeyallsignsandinstructions.
144
Emergency Calls
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone, operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
Section 12: Health and Safety Information
145
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Yourphoneisnotatoy.Childrenshouldnotbeallowedto
play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
146
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
BatterymarchPark,Quincy,MA02269,Attn:Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
Section 12: Health and Safety Information
147
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
148
Availability of Various Features/Ring Tones
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
Section 12: Health and Safety Information
149
inallareas.DownloadableRingTonesmaybeavailableat
an additional cost. Other conditions andrestrictions may
apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
150
Battery Precautions
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car
in summer or winter conditions, as you will reduce the
capacity and lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a hot or cold
battery may temporarily not work, even when the battery is
fully charged. Li-ion batteries are particularly affected by
temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Section 12: Health and Safety Information
151
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
152
Care and Maintenance
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 12: Health and Safety Information
153
154
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
156
Standard Limited Warranty
products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
Section 13: Warranty Information
157
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
ontheoriginalProductorfor90days,whicheverislonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
158
Standard Limited Warranty
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND
RESULTINGFROMTHEPURCHASE,USE,ORMISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISINGDIRECTLYORINDIRECTLYFROMTHEUSE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACHOFTHEEXPRESSWARRANTY,INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DONOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
Section 13: Warranty Information
159
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.THISWARRANTYGIVESYOUSPECIFICLEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THEORIGINALPURCHASEROF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASERMAYUSETHIRD-PARTYSOFTWAREOR
EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATEANYSUCHSOFTWAREOREQUIPMENT
160
Standard Limited Warranty
WITH THEPRODUCT. THEQUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior
Section 13: Warranty Information
161
written approval. Specifications and availability subject
to change without notice.
Intellectual Property Statement
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
securedbytheIntellectualProperty. Moreover,youagree
thatyouwillnot(andwillnotattemptto)modify,prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
162
Samsung Telecommunications America (STA), L.P.
Samsung Telecommunications America (STA),
L.P.
Internet Address: http://www.samsungusa.com
©2005SamsungTelecommunicationsAmerica.Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Openwave® is aregisteredTrademarkofOpenwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Section 13: Warranty Information
163
164
Redialing Last Number
Silent Mode 30
Index
A
Call Records
Call time 29
ABC mode 48
Accessing a Menu Func-
tion 40
Delete all 29
Incoming calls 28
Outgoing calls 28
Alarm 104
Alerts on Call 89
Charging battery 8
Conversion 112
D
B
Backlight
description 20
Battery
Dialing a Number
Phone Book 59
charging 8
installing 8
low indicator 10
removing 6
SIM Card 59
Display
backlight 20
icons 19
Display Settings 91
E
Entering Text 47
Changing the Text Input
Mode 48
Brightness Control 93
Broadcast Messages 80
Browser Messages 79
C
Calculator 108
Calendar 105
Using ABC Mode 51
Using Numbers 53
Using Symbols 53
Using T9 Mode 49
Call Functions 21
Adjusting the Call Volume
Answering a Call 24
Call Log 25
Call Records 27
Correcting the Number
External Display 20
F
Functions and Options 30
Making a Call 22
165
Messaging 65
G
Types of Messages 66
Games 117
Get More Help 93
Getting Started 5
Missed Call
Deleting 27
Editing 26
Activating Your Phone 6
Viewing 26
Voicemail 11
Greeting Message 93
H
Multi-Party Call 36
Dropping One Participant
Health and Safety Infor-
mation 127
Private Conversation 36
Mute 33
HiFi Ringers 116
I
N
Network Selection 101
Network Services
Call Forwarding 99
Number mode 48
O
On/off switch, phone 10
Icons, description 19
Instant Messaging 82
International Call 22
K
Keypad Tone 87
Options
L
During a Call 32
Putting a Call on Hold 32
Low battery indicator 10
M
Organizer 103
Alarm 104
Making a Call
Phonebook 23
Calculator 108
Calendar 105
Conversion 112
Stopwatch 113
Timer 112
MegaTones 116
Memo
Viewing 107
Writing 106
To Do List 108
Voice Memo 110
Memory Status 82
Menu Navigation 39
Own Number 62
Menu Outline 41
Message Tone 87
166
Switching on/off
phone 10
Symbol mode 48
P
Phone
icons 19
switching on/off 10
T
Phone Settings 89
T9 mode 48
Phonebook 55
Dialing a Number 59
Finding a Phonebook En-
try 56
Searching for a Number
Picture Messages 73
Text Input Mode
Changing 48
Text Messages 68
Timer 112
To Do List 108
Travel adapter 8
t-zones 122
t-zones Browser
Entering Text 123
Exiting 122
R
Record
Voice Memo 110
Ring Volume 86
Navigating 122
S
U
Security 94
UnderstandingYourPhone
Settings 85
Phone Settings 89
Sound Settings 86
Features of Your Phone
View of Your Phone 16
Shortcuts 40
SIM card
V
installing 6
Voice List 111
Soft Keys 30
Speakerphone 34
changing number 12
Voice Memo 110
Voice messages 66
W
Speed Dial
Setting Up Entries 60
Standard Limited Warran-
ty
Warranty Information 155
Stopwatch 113
167
168
|