* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
TRI BAND
GPRS TELEPHONE
SGH-V205
ELECTRONICS
Printed in Korea
Code No.: GH68-xxxxxA
English. 11/2002. Rev. 1.0
Contents
Contents
Options During a Call ................................. 49
Camera ...................................................... 79
Putting a Call on Hold......................................... 49
Switching the Microphone Off (Mute).................... 50
Muting/Sending Key Tones.................................. 51
Searching for a Number in the Phonebook............. 51
Using the SMS Service ....................................... 52
Answering a Second Call..................................... 52
Making a Multiparty Call ..................................... 53
Take and Send (Menu 4.1) ................................. 79
New Photo (Menu 4.2) ....................................... 80
My Photo (Menu 4.3) ......................................... 80
Sound Settings........................................... 82
Ring Tone (Menu 5.1) ........................................ 82
Ring Volume (Menu 5.2) ....................................... 82
Alert Type (Menu 5.3)........................................ 83
Keypad Tone (Menu 5.4) .................................... 83
Message Tone (Menu 5.5)................................... 84
Folder Tone (Menu 5.6)....................................... 85
Power on/Off (Menu 5.7) ....................................... 85
Extra Tones (Menu 5.8)...................................... 85
Using the Menus......................................... 55
Accessing Menu Functions by Scrolling ................. 55
Accessing Menu Functions by Using Shortcuts ....... 56
List of Menu Functions........................................ 56
Text Messages ........................................... 61
Phone Settings........................................... 87
Read Messages (Menu 1.1)................................. 61
Write Messages (Menu 1.2) ................................ 63
Templates (Menu 1.3)........................................ 65
Setup (Menu 1.4).............................................. 65
Broadcast (Menu 1.5) ........................................ 67
Voice Mail (Menu 1.6) ........................................ 68
My Contents (Menu 1.7) ....................................... 69
Memory Status (Menu 1.8) ................................. 69
Infrared Activate (Menu 6.1)............................... 87
My Settings (Menu 6.2)...................................... 88
Greeting Message (Menu 6.3) ............................. 89
Own Number (Menu 6.4).................................... 89
Language (Menu 6.5)......................................... 90
Security (Menu 6.6)........................................... 90
Display Settings (Menu 6.7) ................................. 93
Extra Settings (Menu 6.8)................................... 95
Short Cut (Menu 6.9)......................................... 96
Reset Settings (Menu 6.10) ................................ 96
Picture Messages ....................................... 70
Inbox (Menu 2.1) .............................................. 70
Outbox (Menu 2.2) ............................................ 72
Write New (Menu 2.3) .......................................... 73
Delete All (Menu 2.4)......................................... 75
Setup (Menu 2.5).............................................. 75
Organizer................................................... 97
Calendar (Menu 7.1).......................................... 97
To Do List (Menu 7.2)........................................... 99
Time & Date (Menu 7.3).................................... 102
Alarm (Menu 7.4)............................................... 103
Calculator (Menu 7.5)......................................... 104
Currency Exchange (Menu 7.6) .......................... 105
Call Records ............................................... 76
Missed Calls (Menu 3.1) ..................................... 76
Incoming Calls (Menu 3.2).................................. 76
Outgoing Calls (Menu 3.3).................................. 77
Delete All (Menu 3.4)......................................... 77
Call Time (Menu 3.5) ......................................... 77
Network Services..................................... 106
Call Forwarding (Menu 8.1)................................ 106
Call Waiting (Menu 8.2)..................................... 108
Network Selection (Menu 8.3)............................ 109
Caller ID (Menu 8.4)........................................... 110
Band Selection (Menu 8.5).................................. 111
5
4
Contents
Funbox..................................................... 112
Games (Menu 9.1) ............................................. 112
T-Zones (Menu 9.2).......................................... 112
Downloads (Menu 9.3)........................................ 112
Solving Problems ..................................... 114
Access Codes ........................................... 117
Phone Password ............................................... 117
PIN................................................................. 118
PUK................................................................ 118
PIN2............................................................... 119
PUK2 .............................................................. 119
Health and Safety Information................. 120
Exposure to Radio Frequency (RF) Signals ........... 120
Precautions When Using Batteries....................... 123
Road Safety..................................................... 125
Operating Environment ..................................... 127
Potentially Explosive Atmospheres ...................... 129
Emergency Calls............................................... 130
Other Important Safety Information.................... 131
Care and Maintenance....................................... 132
Acknowledging Special Precautions and
the FCC and Industry Canada Notice ................... 134
Glossary................................................... 139
Index ....................................................... 143
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information”
on page 120.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Radio Frequency Exposure
Your package contains the following items.
The design of this phone complies with FCC (of the
U.S. Government) requirements relating to radio
frequency (RF) exposure. To maintain compliance
with these requirements, use only Samsung-
supplied or approved accessories. Use of non-
approved accessories may violate the
requirements.
Handset
Battery
Travel Adapter
Hand Strap
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or
repair your phone.
Ear-Microphone
User’s Manual
Holster
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Ear-microphone
• Simple hands-free kit
• Standard/slim batteries
• Cigarette lighter adapter
8
9
Your Phone
Your Phone
Key
Description
Phone Layout
In menu mode, scroll through the
menu options and Phonebook memory.
The following illustrations show the main elements
of your phone.
In idle mode, allow you to access your
favourite menu options directly; for
more information on shortcuts, see
page 96.
Earpiece
In menu mode, return to the previous
menu level and select the current
menu respectively.
Folder
Display
When entering text, move the cursor
left and right respectively.
In idle mode, allow you to access your
favourite menu options directly; for
more information on shortcuts, see
page 96.
Navigation
keys
Camera key
Soft key (right)
Soft key (left)
WAP Browser
key
Ear-microphone
jack
Dial/menu
confirmation key
Perform the functions indicated by the
text above them (on the bottom line of
the display).
Power on/off /
menu exit key
Volume/menu
browse keys
Alphanumeric
keys
(soft keys)
Cancel/
correction key
In idle mode, quickly accesses the
Camera menu to allow you to use the
camera on your phone.
Microphone
IrDA port
Special
function keys
In idle mode, launches the WAP
(Wireless Application Protocol) Browser
directly.
Antenna
Camera module
Deletes characters from the display.
External display
Service light
In menu mode, returns to the previous
menu level.
10
11
Your Phone
Key
Your Phone
Display
Description (continued)
Makes or answers a call.
Display Layout
When held down in idle mode, recalls
the last number dialed or received.
The display comprises three areas.
In menu mode, selects a menu
function or stores information that you
have entered (such as a name) in the
phone or SIM memory.
Icons
Text and
graphic area
Ends a call. Also switches the phone on
and off when held down.
In menu mode, cancels your input and
returns to idle mode.
Menu
Ph.Book
Soft keys
When held down in idle mode, accesses
your voice mail.
Area
Description
Enter numbers, letters and some
special characters.
First line
Displays various icons (see
page 14).
Middle lines
Display messages, instructions
and any information that you
enter (number to be dialed, for
example).
Enter special characters.
Perform various functions.
Last line
Shows the functions currently
assigned to the two soft keys.
(on the side of the phone)
During a call, adjust the earpiece
volume.
In idle mode, adjust the key volume.
In menu mode, scroll through the
menu options and Phonebook memory.
12
13
Your Phone
Your Phone
Icons
Backlight
The display is illuminated by a backlight. When you
press any key or open the folder, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Back Light
menu option (Menu 6.7.2).
Icon Description
Shows the received signal strength. The
greater the number of bars, the better the
signal.
To specify the length of time for which the backlight
is active, set the Back Light menu option (Menu
6.7.2); see page 93 for further details.
Appears when a call is in progress.
Appears when silent mode is active or you
set the Alert Type menu option (Menu
5 .3), so that the phone vibrates when
you receive a call; for further details, see
page 83.
You can also set the phone to use the backlight only
during a specified period of time, via the Auto
Light menu option (Menu 6.7.3); see page 94 for
further details.
Appears when a new text message is
received.
External Display
Your phone has an external display on the cover. It
indicates that you have an incoming call or a
message, and notifies you when you set an alarm at
the specified time.
Appears when a new voice mail message
is received.
Appears when you are entering text to
indicate the current text input mode.
Appears when you set the alarm.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when the IrDA port is active. For
details, see page 87.
Appears when mute mode is active.
14
15
Your Phone
Getting Started
Service Light
Installing the SIM Card
The service light is below the external display on
the folder cover. It flashes when services are
available on the phone.
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and many others.
To activate or deactivate use of the service light,
set the Service Light menu option (Menu
6.7.4); see page 94 for further details.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
displayed.
key until the power-off image is
Service light
2. Remove the battery. To do so:
➀ Press down the catch above the battery and
hold it in this position.
➁ Slide the battery and lift it away, as shown.
16
17
Getting Started
Getting Started
3. Slide the SIM card into the SIM card holder so
that the holder locks the card in position.
Make sure that the notched corner is top left and
the gold contacts of the card face into the
phone.
5. Slide the battery towards the top of the phone
until it clicks into place. Make sure that the
battery is properly installed before switching on
the power.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your
phone. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: When you need to remove the SIM card, slide
it, as shown, and take it out of the holder.
The phone can be used while the battery is charging,
but this will cause the phone to charge more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
bottom of the phone.
4. Place the battery back, taking care to match the
tabs on the battery with the grooves on the
phone.
18
19
Getting Started
Getting Started
2. Plug the adapter into a standard AC wall outlet.
Switching the Phone On/Off
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the
connector and pulling the connector out.
1. Open the folder.
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a password, enter the
password and press the OK soft key. The phone
password is factory set to “00000000.” For
further details, see page 117.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 118.
The phone searches for your network and when
it finds the network, the idle screen, illustrated
below, appears on each display. Now, you can
make or receive a call.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
Service Provider
07:30 AM
Wed Jul 31
07:30
Wed/31 AM
**Warning**
Low Battery
Menu
Ph.Book
Note: The display language is factory set to English.
To change the language, use the Language
menu option (Menu 6.5); for further details,
refer to page 90.
Menu
Ph.Book
When the battery becomes too weak for the phone
to operate, it switches off automatically.
5. When you wish to switch the phone off, hold
down the
displayed.
key until the power-off image is
20
21
Getting Started
Call Functions
Using the Holster
Making a Call
The supplied holster allows you to conveniently
carry your phone with you.
When the idle screen is displayed, enter the area
code and phone number, and press the key.
To attach the phone to the holster:
1. Insert the phone into the slot of the holster and
press the top of the phone down until it locks
into place.
Note: If you have checked the Auto Redial option
in the Extra Settings menu (Menu 6.8),
the number is redialed automatically up to ten
times when the person does not answer the
call or is already on the phone; see page 95 for
further details.
Making an International Call
1. Press and hold down the
The character appears.
key.
+
2. Enter the country code, area code and phone
number and press the
key.
2. Attach the holster to your belt or clothing where
it will convenient to reach and use.
Correcting the Number
Note: If a hand strap is attached to the phone or
there is any obstacle in the hand strap hole,
the phone may not be firmly inserted.
To clear...
Press the...
the last digit
displayed
key.
To remove the phone from the holster, first press
the catch of the holster down to unlock the phone,
and then take the phone out of the slot.
any other digit
or
key until the cursor is
in the number immediately to the right of the
digit to be cleared. Press the
key. You can also insert a missing
digit simply by pressing the
appropriate key.
the whole
display
key for more than one
second.
22
23
Call Functions
Call Functions
Ending a Call
Making a Call from the Phonebook
When you want to finish your call, briefly press the
key.
You can store frequently dialed phone numbers with
a name in the SIM card or the phone memory, using
the Phonebook. You then simply select the required
name to recall the associated number. For further
details on the Phonebook features, refer to page 34.
Redialing the Last Number
The phone stores the numbers you dialed, received
or missed if the callers are identified; see “Call
Records” on page 76 for further details.
Adjusting the Volume
To recall any of these numbers:
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
1. If you have typed any characters on the display,
clear the display by holding down the
for more than one second.
key
Press the
key to increase and the
key to
decrease the volume.
2. Press the
key to display a list of the last
numbers in the order in which the calls were
made.
3. Use the
and
keys to scroll through the
numbers until the required number is
highlighted.
4. To...
Press the...
dial the number
highlighted
key.
edit the number Edit soft key and change
highlighted
the number as required,
referring to “Correcting
the Number” on page 23
for further details.
In idle mode with the folder open, you can adjust the
key volume using these keys.
24
25
Call Functions
Call Functions
Answering a Call
Viewing Missed Calls
When somebody calls you, the phone rings and the
following screen appears on each display.
If you are unable to answer a call for any reason,
you can find out who called you, provided that this
service is available, so that you can call the person
back, if necessary.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
nnnnnn
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
Accept
Reject
The number corresponding to the most recent
missed call is displayed, if available.
If the caller can be identified, the caller’s phone
number or name, if stored in your Phonebook, is
displayed.
3. To....
scroll through the
Press the...
1. If necessary, open the folder. Press the
key or
or
key.
the Accept soft key to answer the incoming call.
missed calls
If the Anykey Answer option in the Extra
Settings menu (Menu 6.8) is checked, you can
press any key to answer a call except for
call the number
displayed
key.
the
page 95).
key and the Reject soft key (see
edit or delete a
missed call number
Select soft key (see
below).
If the Active Folder option in the Extra
Settings menu (Menu 6.8) is checked, you can
answer the call simply by opening the folder (see
page 95).
Editing a Missed Call Number
Note: If the number corresponding to the missed call
is not available, the Edit Number option is
not displayed.
Note: To reject an incoming call, press and hold
the volume keys on the left side of the
phone before opening the folder.
1. Press the Options soft key.
2. End the call by closing the folder or pressing
2. Press the
or
key to highlight the Edit
the
key.
Number option.
Note: You can answer a call while using the
Phonebook or menu features.
26
27
Call Functions
Call Functions
3. Press the Select soft key.
Quickly Switching to Silent mode
4. Change the number as required.
Silent mode is convenient when discretion is
required and you a wish to stop the phone from
making any noise, in a theatre for example.
5. To...
call the number
Press the...
In idle mode, to switch your phone quickly to silent
key.
mode, simply press and hold down the
key until
store the number Save soft key and enter
the name and location
the “Silent Mode” message and vibration icon (
are displayed.
)
required (for further details,
refer to page 34).
In silent mode, your phone changes the sound
settings as follows.
Deleting a Missed Call
Option
New Setting
Vibration
OFF
1. Press the Options soft key.
Alert Type (Menu 5.3)
Keypad Tone (Menu 5.4)
SMS Tone (Menu 5.5.1)
2. If necessary, press the
or
key to highlight
the Delete option.
Light Only
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
To exit silent mode and reactivate the previous
sound settings, press and hold the key again
until “Exit Silent Mode” appears. The vibration icon
) is no longer displayed.
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 3.1); for further details, see
page 76.
(
28
29
Selecting Functions and Options
Selecting Functions
and Options
To view the various functions/options available and
select the one required:
Your phone offers a set of functions that allow you
to customize your phone. These functions are
arranged in menus and sub-menus, accessed via
1. Press the appropriate soft key.
2. To...
select the:
Press the...
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
Select soft key or
• function displayed
or
the
key.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
• option highlighted
view the next function
or highlight the next
option in a list
key or
the left side of the
phone.
key on
Example:
move back to the
previous function or
option in a list
key or
the left side of the
phone.
key on
move back up one
level in the structure
key,
key.
soft key or
exit the structure
without changing the
settings
key.
Options
918
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Press the left soft
Press the right soft
key to access the
available options.
key to change the
text input mode.
30
31
Selecting Functions and Options
Selecting Functions and Options
4. Scroll through the sub-menus until you reach
Example: Setting the Display
Language
the Language sub-menu, by pressing the
or
key.
1. When the idle screen is displayed, press the
Phone Settings
Menu soft key to access the menus.
Infrared Activ...
My Settings
Greeting Me...
Service Provider
07:30 AM
Wed Jul 31
Shows the current
setting
English
Own N
Language
Security
6.5
Select
5. To view the languages available, press the
Select soft key or the key.
Menu
Ph.Book
The current setting is highlighted.
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
key.
or
Language
English
Current language
Sound Settings
Español
Français
Automatic
Select
6.5.1
Organizer
6. Scroll through the list of languages until the
appropriate one is highlighted, by pressing the
or key.
Select
6
3. To select the Phone Settings menu, press the
Select soft key or the
key.
7. Press the Select soft key or the
key to
confirm your selection.
Phone Settings
Infrared Activ...
My Settings
Greeting Me...
Own Number
Language
8. Press the
structure.
or
key twice to exit the menu
If the menu name is too long
for the display, it is scrolled
when highlighted.
Security
Select
6.1
32
33
Phonebook
Phonebook
4. Enter a name and press the OK soft key.
You can store phone numbers and their
corresponding names in the memory of your SIM
card. In addition, you can store up to 500 numbers
in the phone memory. The SIM card and phone
memories, although physically separate, are used
as if they were a single entity, called the
Phonebook.
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 43.
The phone now displays the first free location in
the last memory used to save a number and
name. If that memory is full, the first free
location in the other memory is displayed.
Note: If you change phones, any numbers stored
in your SIM card memory will automatically
be available with the new phone, whereas
any numbers stored in the phone memory
must be restored.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in idle mode
• Using the New Entry option in the Phonebook
menu
5. Press the right soft key, labeled To Card or To
Phone to toggle between the phone and card
memories.
Storing a Number in Idle mode
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the Phonebook.
1. Key in the number to be stored.
7. Press the OK soft key to store the name and
number.
Note: If you make a mistake while entering a
After storing, the phone displays the Phonebook
entry or name just created.
number, correct it using the
further details, refer to page 23.
key. For
2. When you are sure that it is correct, press the
8. To...
use the entry options
Press the...
Save soft key.
Options soft key.
3. Select an icon to identify the category of number
to be stored. Three categories are available;
return to the idle
screen
key.
(mobile phone number),
(office number) and
(home number). To select the category,
press the or key, followed by the Select soft
key.
34
35
Phonebook
Phonebook
Use this option to dial a number similar to one in
the Phonebook, a different extension in the same
office, for example.
Storing a Number Using the Phonebook
Menu
1. When the idle screen is displayed, press the
Use the
refer to page 23 for further details. When you are
ready to dial, press the key.
key to change the number as required;
Ph.Book soft key.
2. Scroll to New Entry by pressing the
or
key and press the Select soft key.
Edit: allows you to edit the Phonebook entry.
3. Select an icon to identify the category of the
number to be stored.
Select One Entry to change one number in the
selected name. If you change the name, the
number is saved separately. Select All Entry to
change the name of the entry.
Note: The E-mail icon (
) is available in this
step. It allows you to save an E-mail
address instead of a phone number.
Erase: allows you to erase the selected name and
number from the Phonebook. You are asked to
confirm that you wish to erase the name and
number by pressing the Yes soft key.
4. Continue the procedure from Step 4 on page 35
to store the number.
Using Phonebook Entry Options
Copy: allows you to copy the selected number to
another location. Use this option to store a number
similar to one already in the memory; once copied,
edit the number and store it in the Phonebook.
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
Caller Group: allows you to assign the entry to a
caller group so that the phone alerts you in a
particular way when the corresponding person calls
you. Select one of the ten groups available.
To...
Press the...
select the
Select soft key or the
highlighted option
key.
To remove an entry from a group, select the No
Group option.
highlight a different
option
or
key until the
required option is
highlighted.
For more information on how to change caller group
properties, see page 40.
The following options are available:
Add Entry: allows you to add a new number in
a different category (mobile, office, home or
E-mail) to the currently selected name. A
Phonebook entry or name can contain up to four
numbers, one in each category.
Paste: allows you to paste the selected number
into the normal dialing mode.
36
37
Phonebook
Phonebook
Searching for a Number by Caller Group
Searching for a Number in the
Phonebook
1. When the idle screen is displayed, press the
Ph.Book soft key.
After storing numbers in the Phonebook, you can
search for them in two ways; by name and by caller
group.
2. Scroll to Group Search by pressing the
or
key and press the Select soft key. You are
asked to enter a group name.
Searching for a Number by Name
3. Enter the first few letters of the group name that
you wish to find.
1. When the idle screen is displayed, press the
The caller groups are listed, starting with the
first group matching your input. The group is
also highlighted.
Ph.Book soft key.
2. Press the Select soft key when Search is
highlighted. You are asked to enter a name.
4. Scroll to the required group by pressing the
3. Enter the first few letters of the name that you
wish to find.
or
key and press the View soft key.
The Phonebook entries in the selected caller
group are listed.
The Phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To...
Press the...
4. To...
view the highlighted
Press the...
view the
highlighted entry
View soft key.
View soft key.
select a different
entry
or
key until the
entry
required entry is
highlighted.
select a different
entry
or
key until the
required entry is
highlighted.
6. Once you have found the required entry, press
the key to dial the number, or press the
look for a name
starting with a
different letter
key labeled with the
required letter.
Options soft key to access the Phonebook
entry options; for further details, see page 36.
5. Once you have found the required entry, press
the key to dial the number, or press the
Options soft key to access the Phonebook
entry options; for further details, see page 36.
38
39
Phonebook
Phonebook
Editing a Caller Group
Speed-Dialing
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
1. When the idle screen is displayed, press the
Ph.Book soft key.
2. Scroll to Group Edit by pressing the
or
key and press the Select soft key.
Setting Up Speed-Dial Entries
3. Enter the first few letters of the required group
name or scroll through the group list by pressing
1. When the idle screen is displayed, press the
the
or
key.
Ph.Book soft key.
4. When the required group is highlighted, press
2. Scroll to Speed Dial by pressing the
or
the Options soft key.
key and press the Select soft key.
5. Select each option and change the settings, as
required. The following options are available:
3. Select the key,
to
, to which you wish to
assign the speed-dialing feature, and press the
OK soft key.
•
•
•
•
Call ring tone: allows you to select the ring
tone to be used when you receive a voice call
from a person in the group.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
SMS tone: allows you to select the ring tone
to be used when you receive a text message
from a person in the group.
4. Select the required Phonebook entry from the
list and press the View soft key.
Graphic: allows you to select the graphic icon
to be displayed when you receive a voice call
from a person in the group.
5. Select the required number if the entry has
more than one number, by pressing the
or
key and press the Select soft key.
Group Name: allows you to assign a name to
the group; for further details on how to enter
characters, see page 43.
6. Once you have assigned a number to the
selected key, four options are available:
6. When you have finished, press the
key.
or
•
•
•
Change: allows you to assign a different
number to the key.
Erase: allows you to clear the setting so that
no number is assigned to the key.
Erase All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
40
41
Phonebook
Entering Text
•
Number: allows you to view the number
assigned to the key.
When using your phone, you will often need to
enter text. For example, when storing a name in the
Phonebook, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
7. When you have finished, press the
key.
or
Speed-Dialing from the Phonebook
You are provided with the following text input
modes.
To speed-dial the numbers assigned to keys
, press and hold down the appropriate key.
to
• T9 mode
Note: Memory location 1 is reserved for your Voice
Mail server number.
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the
key once, J, K or L may be displayed. The T9
mode automatically compares your keystrokes
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional upper/lower-case
character modes.
Checking the Memory Status
You can check how many names and numbers are
stored in the Phonebook (card and phone
memories) or how many free locations remain.
1. When the idle screen is displayed, press the
• Upper/lower-case character modes
Ph.Book soft key.
These modes allow you to enter letters by
pressing the key labeled with the required letter
once, twice, three or four times until the letter is
displayed.
2. Select the Memory Status option.
3. Press the
or
key to view the number of
existing and remaining entries in the card and
phone memories.
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Number mode
This mode allows you to enter numbers.
42
43
Entering Text
Entering Text
Changing the Text Input Mode
Using the T9 Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
Text input mode
indicator
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to
letter.
. Press each key only once for one
Example: to enter Hello in the T9 mode,
press and
,
,
,
.
The word that you are typing appears on the
display. It may change with each key that you
press.
Options
918
2. Enter the whole word before editing or deleting
the keystrokes.
To select the...
Press the
until...
soft key
3. If the word is correct, start entering the next
word.
T9 mode
is displayed.
See page 45.
Otherwise, press the
repeatedly to display alternate word choices for
the keys that you have pressed.
,
or
key
Upper-case character
mode
A
is displayed.
See page 46.
Example: both Of and Me have the sequence
Lower-case character
mode
a
is displayed.
,
. The phone displays the most
See page 46.
commonly used choice first.
Number mode
1
is displayed.
4. Put a space between each word by pressing the
key.
See page 48.
Symbol mode
is displayed.
See page 48.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
• To enter full stops, hyphens or apostrophes,
press the
key. The T9 mode applies grammar
44
45
Entering Text
Entering Text
Refer to the table below for more information about
the characters available.
rules to ensure that the correct punctuation is
used.
Example:
is used twice to display two
punctuation marks:
Characters in the Order Displayed
Key
Lower Case
Upper Case
1
2
3
4
5
6
7
8
9
0
Space
L
e
t
’
s
e
a
t
.
• To change the case in the T9 mode, use the
key.
• You can move the cursor by using the
keys. To delete letters, press the
and hold down the
and
key. Press
key to clear the display.
Using the Upper/Lower-Case
Character Mode
• To insert a space, press the
key.
• You can move the cursor by using the
keys. To delete letters, press the
and
key. Press
Use the
to
keys to enter your text.
and hold down the
key to clear the display.
1. Press the key labeled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press
a different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
right automatically, and then select the next
letter.
46
47
Entering Text
Using the Symbol Mode
The Symbol mode enables you to insert symbols in
a text message.
918
OK
Use the navigation keys to scroll to the desired
symbol and then press OK soft key to insert the
highlighted symbol into your message.
Using the Number Mode
The Number mode enables you to enter numbers in
a text message (a telephone number for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text input mode.
48
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call
in progress if this service is supported by the network.
Of these two calls, one is active and the other is on
hold and you can switch between the calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Key in the phone number that you wish to dial or
look it up in the Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the
Hold soft key. Or press the Options soft key
and select the New Call option.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
49
Options During a Call
Options During a Call
Switching the Microphone Off (Mute)
Muting/Sending Key Tones
You can temporarily switch your phone’s
microphone off, so that the other party cannot hear
you.
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your
phone does not transmit the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
Note: To communicate with answering machines or
computerized telephony systems, the Send
tones option must be selected.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the
key to highlight the
Searching for a Number in the
Phonebook
Mute option.
3. Press the OK soft key.
You can search for a number in the Phonebook
during a call.
The other party can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
1. Press the Options soft key.
2. Press the
option.
key to highlight the Phonebook
2. If necessary, press the
key to highlight the
Unmute option.
3. Press the OK soft key.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
The other party can hear you again.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input. The entry is also
highlighted.
5. To view the highlighted entry, press the View
soft key.
For further details on the Phonebook feature, refer
to page 34.
50
51
Options During a Call
Options During a Call
Using the SMS Service
Making a Multiparty Call
If you receive an SMS (Short Message Service)
A multiparty call is a network service that allows up
to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
message during a call, the message icon (
flashes on the display. The Messages option
enables you to use this feature.
)
Read Messages: allows you to read the messages
that you have received.
Setting up the Multiparty Call
Write Messages: allows you to write a message.
1. Call the first participant in the normal way.
For further details on the SMS service, refer to
page 61.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (Menu 8.2) to Activate (see page 108).
You will be notified of an incoming call by a call
waiting tone.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Conference
option.
You can add incoming callers by answering the call
and pressing Options, followed by Conference
.
To answer a call while you have a call in progress,
proceed as follows.
Repeat as required.
1. Press the
key to answer the incoming call.
Having a Private Conversation With One
Participant
The first call is automatically put on hold.
2. To switch between the two calls, press the
1. Press the Options soft key and choose the
Swap soft key.
Select one option.
To end a call on hold, press the Options soft
key and select the End Held Call option.
The list of call participants appears.
2. Highlight the required person, by pressing
3. To end the current call, press the
key.
the
or
key, followed by the Select soft
key or the
key.
52
53
Options During a Call
Using the Menus
3. Select the Private option.
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
4. To return to the multiparty call, press the
Options soft key and select Conference
.
All the multiparty call participants can now hear
each other.
Accessing Menu Functions by Scrolling
Dropping One Participant
1. In idle mode, press the Menu soft key to access
menu mode.
1. Press the Options soft key and choose the
Select one option.
2. Scroll with the
and
keys to reach the
required main menu, Phone Settings for
example. Press the Select soft key or the key
to enter the menu.
The list of call participants appears.
2. Highlight the required person, by pressing
the
key or the
or
key, followed by the Select soft
key.
3. If the menu contains any sub-menus,
Language for example, you can access them
by scrolling with the
pressing the Select soft key.
and
keys and
3. Select Remove
.
The call is ended with that participant, but you
can continue to talk with the other participants.
If the menu that you have selected contains
further options, repeat the same procedure.
4. End the multiparty call by closing the phone or
pressing the
key.
4. To...
Press the...
or key or use
scroll through the
menus
the
and keys on the
left side of the phone.
confirm the chosen
setting
Select soft key or the
key.
return to the
previous menu level
soft key or the
key.
key.
exit the menu
without changing
the settings
54
55
Using the Menus
Using the Menus
1. Text Messages (see page 61)
Accessing Menu Functions by
Using Shortcuts
1.1 Read Messages
1.1.1 Inbox
1.1.2 Outbox
The menu items (menu, sub-menus and options)
are numbered and can be accessed quickly by using
their shortcut number. The shortcut number is
1.1.3 Delete All
1.2 Write Messages
1.3 Templates
1.4 Setup
shown in the bottom right next to the
soft key on
the display. Simply press the Menu soft key and
key in the required number.
1.4.1 Setting 1*
1.4.2 Setting 2
1.4.3 Setting 3
*
*
Note: The numbers assigned to each menu option are
indicated in the list on the next page. They
may not match the menu number on the
phone. It depends on the services supported
by the SIM card.
1.4.4 Common Setting
1.5 Broadcast
1.5.1 Read
1.5.2 Receive
1.5.3 Channel List
1.5.4 Language
1.6 Voice Mail
Example: Accessing the Language option.
1. Press the Menu soft key.
1.6.1 Call Voice Mail
1.6.2 Voice Server Number
1.7 My Contents
2. Press
3. Press
for Phone Settings
.
1.7.1 My EMS Melody
1.7.2 My EMS Picture
1.7.3 My EMS Animation
for Language
.
The languages available are displayed directly.
1.8 Memory Status
1.8.1 SIM memory
1.8.2 PHONE memory
1.8.3 CB memory
List of Menu Functions
The following illustration shows the menu structure
available and indicates the:
2. Picture Messages (see page 70)
2.1 Inbox
• number assigned to each option
2.2 Outbox
2.3 Write New
2.4 Delete All
2.5 Setup
• page on which you can find a description of each
feature
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu (0) is
displayed first when you press the Menu soft
key to enter menu mode. For further details,
refer to your SIM card manual.
* Shown only if supported by your SIM card.
56
57
Using the Menus
Using the Menus
3. Call Records (see page 76)
6. Phone Settings (continued)
3.1 Missed Calls
6.3 Greeting Message
6.4 Own Number
6.5 Language
3.2 Incoming Calls
3.3 Outgoing Calls
3.4 Delete All
6.6 Security
3.4.1 Missed Calls
3.4.2 Incoming Calls
3.4.3 Outgoing Calls
3.5 Call Time
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
3.5.1 Last Call
6.6.5 FDN Mode*
3.5.2 Total Outgoing
3.5.3 Total Incoming
3.5.4 Reset Timers
6.6.6 Change PIN2*
6.7 Display Settings
6.7.1 Contrast
6.7.2 Back Light
6.7.3 Auto Light
6.7.4 Service Light
6.7.5 Graphic Logo
4. Camera (see page 79)
4.1 Take and Send
4.2 New Photo
4.3 My Photos
6.8 Extra Settings
6.8.1 Auto Redial
6.8.2 Active Folder
6.8.3 Anykey Answer
5. Sound Settings (see page 82)
6.9 Short Cut
6.10 Reset Settings
5.1 Ring Tone
5.2 Ring Volume
5.3 Alert Type
5.4 Keypad Tone
5.5 Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.6 Folder Tone
5.7 Power on/Off
5.8 Extra Tones
5.8.1 Error Tone
5.8.2 Minute Minder
5.8.3 Connect Tone
7. Organizer (see page 97)
7.1 Calendar
7.2 To Do List
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Alarm
7.5 Calculator
7.6 Currency Exchange
6. Phone Settings (see page 87)
6.1 Infrared Activate
6.2 My Settings
6.2.1 Wallpaper
6.2.2 Menu Style
* Shown only if supported by your SIM card.
58
59
Using the Menus
Text Messages
8. Network Services (see page 106)
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, fax, Email
and paging messaging systems, provided that these
services are supported by your network. To send
text messages by phone, you must obtain the
number of the SMS center from your service
provider.
8.1 Call Forwarding
8.1.1 Forward Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Waiting
8.2.1 Voice Calls
8.2.2 Data Calls
8.2.3 Cancel All
8.3 Network Selection
8.3.1 Automatic
8.3.2 Manual
When the message icon (
) appears, you have
received new text messages. If the message
memory is full, an error message is displayed and
you cannot receive any new messages. Use the
Delete option in the Read Messages menu
8.4 Caller ID
(Menu 1.1) to delete obsolete messages.
8.4.1 Default
8.4.2 Hide Number
8.4.3 Send Number
8.5 Band Selection
Read Messages (Menu 1.1)
9. Funbox (see page 112)
Two message boxes are available:
9.1 Games
•
Inbox: used to store the messages that you
9.2 T-Zones
9.3 Downloads
9.3.1 Sounds
9.3.1 Pictures
have received.
•
Outbox: used to store the messages that you
have already sent or will send.
Reading a Message
1. Select the required box and press the Select
soft key.
The list of messages in the box is displayed with
the sender or recipient’s phone number or
name, if it is available in your Phonebook.
2. Select the required message and press the
View soft key to view the message contents.
60
61
Text Messages
Text Messages
3. To scroll through the message, press the
key.
or
Write Messages (Menu 1.2)
In this menu, you can write and send a text
message.
While reading a message, you can choose the
following options by pressing the Options soft key.
Note: You can enter up to 918 alphanumeric
characters for your message. If you add media
items to the message, the number of characters
you can enter will be decreased.
Delete: allows you to delete obsolete messages.
Text Reply (inbox only): allows you to reply to the
sender by sending a text message. You can also
change the SMS center number, if required.
Creating a Simple Text Message
Call Back (inbox only): allows you to call the
sender back.
1. Create your message.
Cut Number: allows you to extract a number from
the message text, so that you can call the number
or save it in the Phonebook.
Note: For more information about entering
characters, refer to page 43.
2. When you have completed your message, press
the Options soft key. The following options are
available:
Send: allows you to send a message that you have
received or saved. For further information on how
to send a message, see page 63.
•
Send Only: allows you to send the message.
The message will be deleted after sending.
Edit Message: allows you to edit a message.
•
Save and Send: allows you to save a copy of
the message and then send the message to the
required destination. You can read the message
in your outbox using the Read Messages
option.
Select Objects: allows you to save the media
items, such as sounds or images, from the message
into your phone’s memory. You can then use the
items when writing a message; for details, see
page 64.
•
Save Only: allows you to save the message so
that it can be sent later. You can read the
message in your outbox using the Read
Messages option.
Note: The options available vary, depending on the
message status (new/old, not sent or sent for
example).
• For information about the Text Formatting
,
If you want to delete all of the messags in the Inbox
or Outbox, use the Delete All menu option (Menu
1.1.3).
Add Objects Add Templates, and
,
Language options, see page 64.
3. Select Send Only or Save and Send, and
press the Select soft key.
If you want just to save the message, select
Save Only. After saving the message, the
phone returns to the Messages menu.
62
63
Text Messages
Text Messages
4. Enter a destination number and press the OK
Templates (Menu 1.3)
soft key. The message is sent.
Using this menu, you can preset up to nine
messages that you use most frequently. Scroll
Creating a Message using the Options
1. Create your message.
through the template list using the
and
keys.
When the required message template is
highlighted, press the Options soft key.
2. Press the Options soft key.
Edit: allows you to write a new message or edit the
selected message.
3. Select one of the following options by using the
and
key.
keys and pressing the Select soft
Note: For further information on how to enter
characters, refer to page 43.
•
Text Formatting: allows you to format the
style of the text. For the Size attribute, the
Send Message: allows you to recall the selected
message. Once you have completed the message,
you can send, save and send, or simply save it. For
details on how to send a message, see page 63.
Normal
,
Large and Small sizes are
available. For the Underline and
Strikethrough attributes, select On or Off
The attributes can be combined.
.
Delete: allows you to delete the selected message.
You are asked to confirm the deletion by pressing
the Yes soft key.
•
Add Objects: allows you to add the required
sound, melody, picture or animation to the
message. Select the category of item to be
added; Sound Melody, Picture and
,
Animation are available. In each category,
you can select the various factory-set items or
choose an item received from other sources,
such as the Internet or other phones.
Setup (Menu 1.4)
Via this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
•
•
Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of the five messages predefined via
the Templates menu option (Menu 1.3); for
further details, see page 65.
Setting x (where
x
is the setting group number):
each group has its own sub-menu.
Language: allows you to change the
language to be used in the T9 input mode.
Select the language to be used.
Service Center: allows you to store or change the
number of your SMS center required when sending
messages. You must obtain this number from your
service provider.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 63.
64
65
Text Messages
Text Messages
Default Type: allows you to set the default message
type (Text, Fax, Email and Paging). The network
can convert the messages into the selected format.
Broadcast (Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message center while attempts are made to deliver
them.
• the phone is in idle mode
• the Receive option is set to Enable
Setting Name: allows you to give a name to the
setting group currently being defined.
• the message channel is currently active in the
channel list
Common Setting: The following four options are
available:
The following options are available:
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message center, if the service is provided by the
network.
Read: lets you view the message. Volatile
displays the messages from the network, but loses
its contents as soon as the phone is switched off.
Scroll through the message using the
and
keys. While reading a message, press the Save
soft key to store the message in the Archive box
for later retrieval.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Receive: allows you to enable or disable the
reception of broadcast messages.
Bearer Selection: allows you to choose between
GSM and GPRS
.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Wap Push: allows you to select whether or not you
receive Web messages from the server. Select
Never if you do not want to receive any messages,
Always to receive all messages, and SMS-C
Specific to receive messages from a specific SMS
center.
Select: used to enable or disable channels in the list
by marking or unmarking them respectively (a
check mark is displayed in front of each channel
selected).
Add Channel: used to enter the ID and title for a
new channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
66
67
Text Messages
Text Messages
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
My Contents (Menu 1.7)
After saving any sounds or images received in
messages into your phone memory, using the
Select Objects option (see page 62), you can see
the items in this menu.
Please contact your service provider for more
information.
To delete the items while viewing in this menu,
press the Delete soft key.
Voice Mail (Menu 1.6)
You can forward the items to other people by
including into a message and/or use them for your
ring tone or background them in a image.
This menu provides you with a way of accessing
your voice mailbox (if provided by your network).
The following options are available.
Three categories of items are available:
Call Voice Mail: before using this feature, you
must enter the voice server number obtained from
your service provider (see menu option 1.6.2). You
can then select this option and simply press the OK
soft key to listen to your messages.
•
•
•
My EMS Melody
My EMS Picture
My EMS Animation
To quickly connect to the voice server, press and
Memory Status (Menu 1.8)
hold down the
key in idle mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
This menu shows how many messages are currently
stored in the SIM, phone and CB memories.
To...
Press the...
enter the server
number
Corresponding numeric
keys.
correct a digit
key.
move the cursor to
the left/right without
clearing the digit
or
key.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
68
69
Picture Messages
Picture Messages
2. To scroll through the message, press the
key.
or
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
While viewing a message, press the Options soft
key to use the following options:
Retrieve: shows you the message contents.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Delete: deletes the message.
More Information: shows you detailed
information about the message.
Viewing a Received Message in the Inbox
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages, which are short messages that contain
images, such as your photos or graphics you
downloaded from the Internet. This function is
available only if it is supported by your service
provider. Only phones that offer picture message
features can receive and display picture message.
When you access the Inbox menu option (Menu
2.1), the list of multimedia messages you received
displays with the senders’ phone numbers, if they
are available in your Phonebook, or subjects.
1. Select the message and press the Select soft
key to view the message.
2. To scroll through the message, press the
key.
or
Inbox (Menu 2.1)
While viewing a message, you can choose the
Message options by pressing the Options soft key.
Viewing a Message When You Receive
it
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See the previous section.
When a new multimedia message comes in, the
display shows the text notification along with the
sender’s number.
When you are reviewing a message, the following
options are available:
1. Press the View soft key to view the message.
Delete: deletes the message.
The display shows brief information about the
message, such as the sender’s number, the
message size and the subject.
Reply: allows you to reply to the sender by
sending a text or picture message.
Call Back: allows you to call the sender back.
If you want to view the message later in the
Inbox, press the Exit soft key.
70
71
Picture Messages
Picture Messages
Cut Number: allows you to extract a number from
the message text, so that you can call the number
or save it in the Phonebook.
Write New (Menu 2.3)
This menu allows you to create a new picture
message and then send it to multiple destinations.
Forward: allows you to forward the message to
another person.
Creating and Sending a Picture Message
Save Picture: allows you to save an image from
the message into your phone. Photos are stored in
the My Photo folder (Menu 4.3) and other
images are in the Pictures folder in the
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 43.
Download menu (Menu 9.3
)
Save Sound: allows you to save a sound from the
message into the Sounds folder in the Download
menu (Menu 9.3).
2. Press the Options soft key and add the
message contents using one of the following
options:
•
Add Text: Enter the message text and press
the OK soft key.
Outbox (Menu 2.2)
•
Add My Photo: allows you to add a photo
you took using the camera on your phone.
Select a photo and press the View soft key.
Then, press the Select soft key to add. For
further details about using the camera, see
page 79.
When you access this menu option, the list of the
picture messages you sent displays.
1. Select the required message and press the
Select soft key to view the message contents.
2. To scroll through the message, press the
key.
or
•
Add Picture: allows you to add a picture
stored in the Pictures folder in the
Downloads menu (Menu 9.3). Choose a
picture and press the Select soft key.
While viewing a message, you can choose the
following options by pressing the Options soft key:
•
•
Send: allows you to send the message. Use
this option when you finish creating the
message.
Delete: deletes the message.
Cut Number: allows you to extract a number from
the message text, so that you can call the number
or save it in the Phonebook.
Save: saves the message in the Outbox
(Menu 2.2) for later use. Use this option
when you finish creating the message.
Send: allows you to resend the message.
3. When the added content displays, press the
key to highlight Add Here
Edit Message: allows you to change the message
contents, picture or text.
.
72
73
Picture Messages
Picture Messages
4. Repeat steps 2 and 3 until you finish creating
your message.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
5. If you want to change the added items, press
the
or
key to highlight one and press the
11.After entering the destinations, press the OK
Options soft key. The following options are
soft key when Send Message highlights.
available:
Your phone sends the message.
•
Edit: allows you to change text or replace the
image with another.
•
•
•
Delete: deletes the item from your message.
Send: allows you to send the message.
Save: saves the message in the Outbox
Delete All (Menu 2.4)
You can delete all of the messages in the Inbox or
Outbox.
(Menu 2.2) for later use.
When a confirming message appears, press the
Yes soft key to confirm.
6. When you finish creating the message, select
Send from the options.
7. Choose one of the following options and press
the Select soft key.
Setup (Menu 2.5)
•
Phone Number: allows you to enter the
desired phone number.
You can change the default message settings.
•
E-mail: allows you to enter the e-mail
address of the recipient to send the message
as an e-mail.
To turn a given option on or off, press the Select
soft key to place or remove a check mark on each
option.
•
Phone Book: allows you to recall a phone
number from your Phonebook.
The following options are available:
Hide ID: When this option is checked, your phone
number is not displayed on the recipient’s phone.
8. Enter a number or an address, or select a
number in the Phonebook. When the correct
number or address is displayed, press the OK
soft key.
Delivery Report: When this option is checked,
the network informs you whether or not your
message has been delivered.
9. If you want to send the message to multiple
destinations, select Add Destination and
press the Select soft key.
Read Reply: When this option is checked, your
phone sends a request for a reply along with your
message to the recipient.
10.Repeat steps 7 to 9. You can enter up to 10
destinations.
74
75
Call Records
Call Records
In this menu, you can view the:
Outgoing Calls (Menu 3.3)
This option lets you view the last 20 numbers
dialed.
• missed, incoming or outgoing calls
• length of time of the call you made or received
• cost of your calls
The number and name are displayed, together with
the date and time when the call was made. By
pressing the Options soft key, you can:
Note: You can access all of the numbers in the three
types of call records by pressing the
idle mode.
key in
• delete the number
• edit the number and save it in the Phonebook
• make a call to the number
Missed Calls (Menu 3.1)
This option lets you view the last 20 unanswered
calls.
Delete All (Menu 3.4)
The number and name, if available, are displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
You can delete all of the numbers stored in each call
record.
When a confirming message appears, press the
Yes soft key to confirm.
• delete the call from the list
• edit the number, if available, and save it in the
Phonebook
Call Time (Menu 3.5)
• make a call to the number
This option lets you view the timers for calls made
and received.
Incoming Calls (Menu 3.2)
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, such as rounding-off for
billing purposes.
This option lets you view the last 20 phone calls
answered.
The number and name, if available, are displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
The following timers are available:
Last Call: the length of the last call.
Total Outgoing: the total length of all calls made
since the timer was last reset.
• delete the call from the list
• edit the number, if available, and save it in the
Phonebook
• make a call to the number
76
77
Call Records
Camera
Total Incoming: the total length of all calls
received since the timer was last reset.
Using the camera module built in your phone, you
can take pictures of people or events while on the
move. Additionally, you can send photos to other
people in a picture message or as an e-mail
Reset Timers: the option used to reset the call
timers; you must first enter the phone password
(see page 117) and then press the OK soft key.
attachment. The camera produces JPEG pictures.
Take and Send (Menu 4.1)
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
Taking a Picture to Send a Message
1. Accessing this menu turns on the camera at the
top left of the phone.
You can see the picture to be captured on the
display.
2. Adjust the picture by rotating the camera
module.
Use the and keys to adjust the brightness of
the picture.
The
and
keys allows you to flip the picture
vertically.
78
79
Camera
Camera
3. Press the Take soft key to take a picture.
Press the Options soft key to use the following
options:
If you want to have the delay time of 10
seconds, press the After 10s soft key.
Send: allows you to send the photo as a picture
message. For further details, see page 73.
4. Press the Save soft key to save the photo.
Wallpaper: allows you to set the photo to be
displayed on the idle screen as a background
image.
5. Enter a name for your photo and press the OK
soft key.
For further details about entering characters,
see page 43.
Delete: deletes the photo.
Delete All: deletes all of the photos saved in your
6. Follow the procedures on page 73 to send the
photo as a picture message.
phone.
Rename: allows you to change the name of the
photo.
New Photo (Menu 4.2)
In this menu, you can take a picture and save it.
Accessing this menu turns on the camera at the top
left of the phone.
Follow steps 2 to 5 in “Taking a Picture to Send a
Message” on page 79.
My Photo (Menu 4.3)
This menu allows you to review your photos.
When you access this menu, the latest photo is
displayed. Press the or
the photos.
key to scroll through
Pressing the Multi soft key shows the photos as
thumbnail images on one screen. In thumbnail view
mode, use the navigation keys to scroll through the
photos. To go back to normal view mode, press the
View soft key.
80
81
Sound Settings
Sound Settings
You can use the Sound Settings feature to
customize various settings, such as the:
Alert Type (Menu 5.3)
This option allows you to specify how you are to be
informed of any incoming calls.
• ring melody, volume and type
• sounds made when you press a key, make an
error or receive a message
The following options are available:
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Ring Tone (Menu 5.1)
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option
(
Menu 5.1); see page 82.
This option allows you to select the required ring
melody.
Vibration: the phone vibrates but does not ring.
You can choose between many different melodies.
Each time you select a melody, it is played for a few
seconds. If you have downloaded any sounds from
the Internet or EasyGPRS program or received any
ring tone messages, you can view the list in this
menu.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone (Menu 5.4)
This option allows you to select the tone that the
keypad generates when you press a key.
Ring Volume (Menu 5.2)
Select one sound type from Cool Piano, Tone
and Beep. Selecting OFF means that the keys do
not make any sound.
,
This option allows you to adjust the ring volume to
one of five levels.
Use the
and
keys or the
and
keys on
the left side of the phone.
82
83
Sound Settings
Sound Settings
Message Tone (Menu 5.5)
Folder Tone (Menu 5.6)
This option allows you to select how the phone
informs you that a new message has been received.
This option allows you to turn on or off the sound
that the phone generates when you open the folder.
You can choose from Off
turn off the sound, select Off
,
Future and Crystal. To
SMS Tone
.
This option allows you to select how the phone
informs you that a new SMS message has been
received.
Power on/Off (Menu 5.7)
The following options are available:
This option allows you to turn on or off the sound
that the phone generates when it is switched on
and off.
OFF: the phone does not use the SMS tone.
Light Only: the service light on the folder cover
flashes.
You can choose from Off
,
Classical and Cheerful.
To turn off the sound, select Off
.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
Extra Tones (Menu 5.8)
SMS Tone1~10: the phone uses an SMS tone.
You are provided with ten SMS tones.
You can customize various other tones used by the
phone.
SMS-CB Tone
To turn a given
tone...
Press the...
This option allows you to select how the phone
informs you that a new cell broadcast (CB)
message has been received.
on
ON soft key.
A check mark is displayed in
front of the option.
The following options are available:
off
OFF soft key.
OFF: the phone does not use the CB tone.
The check mark is no longer
displayed.
Light Only: the service light on the folder cover
flashes.
Vibration: the phone vibrates.
The following options are available:
Single Beep: the phone beeps once.
Error Tone: sets whether the phone informs you
that you have made a mistake or not.
SMS-CB Tone1~10: the phone uses a CB tone.
You are provided with ten CB tones.
84
85
Sound Settings
Phone Settings
Many different features of your phone can be
customized to suit your preferences. All of these
features are accessed via the Phone Settings
menu.
Minute Minder: sets whether the phone must
beep every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets your phone to beep when the
person you are calling answers the phone.
Infrared Activate (Menu 6.1)
This feature allows you to send or receive data/fax
through the infrared port. To use an infrared
connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display
• align the IrDA port on the phone with the IrDA
port on your computer
IrDA port
15
IrDA port
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For the best performance, it is highly
recommended that you use the optional data
link cable.
86
87
Phone Settings
Phone Settings
My Settings (Menu 6.2)
Greeting Message (Menu 6.3)
You can change the background image and the
color of the components in the display according to
your preference.
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
When you select this menu, the current message is
displayed.
Wallpaper
To...
Press the...
key and hold it down
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
clear the existing
message
until the message is cleared.
To change the background image:
enter a new
message
appropriate alphanumeric
keys.
1. Scroll through the list by pressing the
key.
or
change the text
input mode
soft key.
You have various preset images available. If you
set a photo as your wallpaper in the My Photo
menu option (Menu 4.3), you can see it by the
name of My icon.icn.
For further details on how to enter characters, refer
to page 43.
2. Press the Select soft key when the required
image is highlighted.
Own Number (Menu 6.4)
The selected image is displayed.
This feature allows you to:
3. After viewing the image, press the Select soft
• Assign a name to your own phone number
registered on your SIM card
key to display it on the idle screen.
• Edit the name and number
Menu Style
This function is a memory aid, which you can use to
check your own phone number if you need to do.
This option allows you to select the menu display
style. You can choose between Film Style and
Any changes made here do not in any way affect
the actual subscriber number on your SIM card.
Page Style
.
88
89
Phone Settings
Phone Settings
Change PIN
Language (Menu 6.5)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Security (Menu 6.6)
Phone Lock
The Security feature enables you to restrict the use
of your phone to:
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
• the people of your choice
• the types of calls of your choice
The password is factory set to “00000000.” To
change the phone password, refer to the Change
Password menu option (Menu 6.6.4) below.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections (see also pages 117-119).
Once the correct password has been entered, you
can use the phone until you switch it off.
PIN Check
The following options are available:
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
Change Password
To change your PIN, refer to the Change PIN
menu option (Menu 6.6.2).
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
The password is factory set to “00000000.” Once
you have entered a new password, you are asked to
confirm it by entering it again.
Enable: you must enter the PIN each time the
phone is switched on.
90
91
Phone Settings
Phone Settings
FDN Mode
Display Settings (Menu 6.7)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Contrast
This option allows you to adjust the contrast of the
display screens to make them lighter or darker.
The following options are available:
Disable: you can phone any number.
To adjust the display contrast:
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
1. Select the required display, Main LCD or Front
LCD, and press the Select soft key.
Note: Not all SIM cards have a PIN2. If your SIM card
2. Adjust the contrast using the
and
keys or
does not, this menu option is not displayed.
the and keys on the left side of the phone.
To change your PIN2, refer to the Change PIN2
menu option (Menu 6.6.6) below.
3. When you are satisfied, press the OK soft key to
save the selection.
Change PIN2
Back Light
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
The following options are available:
OFF: the backlight is not used.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Short: the backlight comes on when you press a
key or receive a call and switches off 10 seconds
after the last key is pressed.
Long: the backlight comes on when you press a
key or receive a call and switches off 20 seconds
after the last key is pressed.
92
93
Phone Settings
Phone Settings
Auto Light
Extra Settings (Menu 6.8)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
conserve your battery power.
You can turn the automatic redialing or answering
features on or off.
To turn a
feature...
Press the...
The following options are available:
Disable: the backlight is used according to the
setting in the Back Light menu option
on
ON soft key.
A check mark is displayed in
front of the option.
(
Menu 6.7.2); see page 93.
Enable: the backlight is used only during the
specified period of time. Set the required length of
time in hours and minutes, using the appropriate
number keys.
off
OFF soft key.
The check mark is no longer
displayed.
Service Light
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
This option allows you to select whether or not the
service light on the folder cover is used or in which
color it flashes.
Note: The interval between two call attempts varies.
Select the required color from the seven color
settings available. When the phone is ready for use,
the service light will flash in the appropriate color.
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
If you do not wish to use the service light,
When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer option (see below).
select Off
.
Graphic Logo
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
This option allows you to display your operator’s
logo instead of its name.
key, except the
key,
C
key and the Reject
soft key. To reject the call, press the
the Reject soft key.
key or
On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.
When this option is unchecked, you can only press
the key or Accept soft key.
Off: the operator name is displayed in idle mode.
94
95
Phone Settings
Short Cut (Menu 6.9)
The navigation keys can be used as shortcut keys.
When held down in idle mode, they allow you to
access specific menu options directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the
or
key, followed by the
Select soft key.
•
•
Key up
(
)
(
Key down
)
•
•
Key right ( )
Key left ( )
2. Select the menu option to be assigned to the
key by pressing the or key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings (Menu 6.10)
You can easily reset your phone to its default
configuration. To do so:
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000.” To
change this password, refer to page 91.
96
Organizer
The Organizer feature enables you to:
• view the calendar and organize your schedule
• define a list of things to do
• set the current date and time
• set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations
Calendar (Menu 7.1)
With the Calendar feature, you can:
• consult the calendar
• write memos to keep track of your schedule and
trigger an alarm, if necessary
Consulting the Calendar
When you select the Calendar menu option
(Menu 7.1), the calendar is displayed. The
following options are available when you press the
Options soft key.
Search all: displays all memos set, regardless of
the day and starting with the oldest. To scroll
through the memos, press the
or
key.
Delete all: allows you to delete all memos. You
are asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to the
idle mode.
97
Organizer
Organizer
Once you have finished editing the memo, press the
OK soft key. The following options are then
available when you press the Options soft key.
Writing a Memo
To write or edit a memo on a specific date:
1. Select the required date in the calendar, using
the navigation keys.
Alarm: allows you to set the alarm to ring on the
chosen day.
Note: To skip to the previous or next month, press
the volume keys on the left side of the
phone.
Erase: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date and/or time.
2. Press the Select soft key.
Move to: allows you to change the date and/or
time of the memo.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the OK soft
To Do List (Menu 7.2)
key.
This feature allows you to:
Note: For further details on how to enter
characters, refer to page 43.
• enter up a list of tasks to be done
• assign a priority and deadline to each task
• sort the tasks by priority and status mark
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
The color of the date is changed to green to
indicate that a memo exists.
Note: You can enter up to 40 characters. For
further details on how to enter characters,
see page 43.
Editing a Memo
3. Press the OK soft key.
If you select a day for which a memo already exists,
you can press the Edit soft key to edit the memo
displayed.
4. Select high, normal or low priority using the
or
key and press the Select soft key.
5. Enter your deadline.
Note: For further details about how to enter
characters, refer to page 43.
If you do not want to set a deadline, press the
Skip soft key.
98
99
Organizer
Organizer
6. Press the OK soft key.
To...
Then...
copy a task
• highlight the task.
Editing the To Do List
• press the Options soft key.
• select the Copy option.
• change the text, priority
and deadline for the task as
required.
If tasks are already defined in the To Do List when
you select the To Do List menu option
(Menu 7.2), the current contents are displayed
with a status mark and priority (three stars for
high, two for normal and one for low).
copy a task to the
calendar
• highlight the task.
The following options are available:
• press the Options soft key.
• select the Copy to
calendar option.
To...
Then...
• change the text and
deadline for the task and
set the alarm as required.
view the details
for a specific task
• highlight the task.
• press the View soft key.
change the status
of a specific task
• highlight the task.
delete a task
• highlight the task.
• press the Options soft key.
• select the Delete option.
• press the Options soft key.
• select the Mark option.
• select the appropriate
status (Done or Undo).
delete all tasks
• press the Options soft key.
• select the Delete all
option.
create a new
task
• press the Options soft key.
• select the New option.
• enter the text, priority and
deadline for the task.
• confirm the deletion by
pressing OK
.
exit the To Do list
• press the Options soft key.
• select the Exit option.
edit an existing
task
• highlight the task.
• press the Options soft key.
• select the Edit option.
• change the text, priority
and deadline for the task.
sort the existing
• press the Options soft key.
tasks by priority or • select the Sort option.
status • select the sort criterion
High Low Done or
Undo).
(
,
,
100
101
Organizer
Organizer
Time & Date (Menu 7.3)
Alarm (Menu 7.4)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
This feature allows you to:
• set the alarm to ring at a specific time
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off
The following options are available:
(Autopower menu option set to Enable
)
Set Time: allows you to enter the current time.
You can choose the time format via the Time
Format menu option (Menu 7.3.4).
The following options are available:
Once Alarm: the alarm rings only once and is
then deactivated.
Note: Before setting the time, you must specify your
Daily Alarm: the alarm rings every day at the
same time.
time zone, in the World Time menu option
(Menu 7.3.3).
Morning Call: the alarm rings to wake you up in
the morning.
Set Date: allows you to enter the day, month and
year.
To set the alarm:
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
1. Choose the type of alarm to be set.
around the world, using the and
keys.
2. Enter the required time and day of the week, if
applicable.
The screen shows the:
• city name
3. Press the OK soft key.
• current date and time
4. If you select Morning Call in Step 1, select the
• time difference between the selected city and
your city if you have set the local time (see below
for further details)
repeat option; Monday to Friday or Monday
to Saturday
.
Remove Alarm: deactivates all alarm settings.
To select your time zone:
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off.
1. Select the city corresponding to your time zone
by pressing the or
key one or more times.
The local date and time are displayed.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm will
not ring.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours
.
102
103
Organizer
Organizer
To stop the alarm when it rings, open the folder and
press the Exit soft key.
Currency Exchange (Menu 7.6)
Using this menu option, you can make currency
conversions.
When setting or viewing an alarm, the following
options are available when you press the Options
soft key:
1. Enter the current exchange rate of your source
currency and press the OK soft key.
Remove Alarm: deactivates the current alarm.
You can insert a decimal point by pressing
Alarm Sound Set: allows you to select the alarm
melody.
the
key.
2. Enter the amount for which you wish to conduct
the currency conversion and press the OK soft
key.
Calculator (Menu 7.5)
The exchange rate amount you entered and
equivalent value are displayed.
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
3. Press the Exit soft key to exit the currency
convertor.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required
arithmetic symbol appears:
+
(add),
-
(subtract), (multiply), (divide).
*
/
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes
:
• To erase any mistakes and clear the display, press
the key.
• To include a decimal point or a bracket, press the left
soft key until the required symbol is displayed.
5. To calculate the result, press the
key.
104
105
Network Services
Network Services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
To set your call forwarding options:
4. Select the type of call forwarding required by
pressing the
or
key, and then press the
Select soft key.
5. Select the type of calls to be forwarded by
Call Forwarding (Menu 8.1)
pressing the
or
key, and then press the
Select soft key.
This network service enables incoming calls to be
rerouted to the number that you specify.
The current status is displayed. If the option has
already been set, the number to which the calls
are forwarded is displayed.
Example: You may wish to forward your business
calls to a colleague while you are on
holiday.
3. To...
Press the...
Call forwarding can be set up in the following ways:
activate call
forwarding
Activate soft key.
Forward Always: all calls are forwarded.
Go to Step 4.
Busy: calls are forwarded if you are already
making another call.
change the call
number
Change soft key.
Go to Step 4.
No Reply: calls are forwarded if you do not answer
the phone.
deactivate call
forwarding
Remove soft key.
Unreachable: calls are forwarded if you are not in
an area covered by your service provider.
4. Enter the number to which the calls are to be
forwarded and press OK
To enter an international code, press the
key until the sign is displayed.
.
Cancel All: all call forwarding options are
canceled.
+
You can specify individual forwarding options for
each of the following call types:
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
• Voice calls only
• Data calls only
You can deactivate all call forwarding settings by
selecting the Cancel All option.
Example: You can forward voice calls to your
colleague if you are already using the
phone.
106
107
Network Services
Network Services
Call Waiting (Menu 8.2)
Network Selection (Menu 8.3)
This network service enables you to be informed
when someone is trying to reach you during another
call.
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually.
You can specify individual call waiting options for
each of the following call types:
Note: You can select a network other than your home
network only if it has a valid roaming
• Voice calls only
• Data calls only
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming:
To set your call waiting options:
1. Select the type of calls to which the call waiting
1. When Network Selection is displayed, press
option is to be applied by pressing the
or
the Select soft key.
key, and then press the Select soft key.
2. Press the
or
key until the appropriate
The screen informs you whether call waiting is
activated or deactivated.
option is highlighted and then press the OK soft
key.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
To return to the previous screen, press the Exit
soft key.
3. Press the
or
key until the preferred
You can also deactivate all call waiting settings by
selecting the Cancel All option.
network is highlighted and then press the OK
soft key.
You are connected to that network.
108
109
Network Services
Network Services
Caller ID (Menu 8.4)
Band Selection (Menu 8.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle any of the following types of
network:
Note: Some networks do not allow the user to change
this setting.
• Combined GSM 900/1800
• GSM 1900
The following options are available:
Default: the default setting provided by the
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band. Proceed as follows.
network is used.
Hide Number: your number is not displayed on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
1. When Band Selection is displayed, press the
Select soft key.
2. Press the
or
key until the appropriate
option, GSM 900/1800 or GSM 1900, is
highlighted and press the OK soft key.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all the available networks. Your phone
then registers with a preferred network within the
selected band.
110
111
Funbox
Funbox
The Funbox menu contains several fun options.
Pictures
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image, but cannot send them to other phones.
Games (Menu 9.1)
When the memory is full, a warning message is
displayed and the phone rejects additional pictures
until you erase obsolete ones.
You can enjoy three games with your phone.
Scroll to the required game, using the
and
keys and press the Select soft key. For further
details on the game, refer to the on-screen help.
T-Zones (Menu 9.2)
Your phone is equipped with a WAP (Wireless
Application Protocol) Browser to allow you to access
and navigate the Wireless Web via your phone. In
this menu, you can use the WAP browser.
For further details on the WAP browser, refer to the
WAP Browser User’s Manual supplied with your
phone.
Downloads (Menu 9.3)
Sounds
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone, but
cannot send the sounds to other phones.
When the memory is full, a warning message is
displayed and the phone rejects additional sounds
until you erase obsolete ones.
112
113
Solving Problems
Solving Problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
“No service,” “Network failure” or “Not
done” is displayed
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
When you switch your phone on, the
following messages may appear
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
You have entered a number but it was
not dialed
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
• Have you pressed the
key?
• Are you accessing the right cellular network?
Enter PIN
• You may have set an outgoing call barring option.
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
Your correspondent cannot reach you
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
option (Menu 6.6.1).
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
114
115
Solving Problems
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorized use.
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The battery is insufficiently charged. Replace the
battery and recharge it.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
The audio quality of the call is poor
mistake, press the
key until the incorrect digit
is cleared and then continue entering the correct
code.
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
The access codes, except for the PUK and PUK2
codes can be changed using Security menu
options (Menu 6.6). See page 90 for further
details.
• Try moving the phone slightly or moving closer to
a window if you are in a building.
Important! Avoid using access codes resembling
emergency numbers, such as 911, so
that you do not dial an emergency
number accidentally.
No number is dialed when you recall a
Phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The
phone password is supplied with the phone and is
factory set to 00000000.
If the above guidelines do not help you to solve
the problem, take a note of:
To...
Refer to...
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
activate/deactivate the
Phone Lock feature
page 91
(
Menu 6.6.3).
page 91
Menu 6.6.4).
Then contact your local dealer or Samsung after-
sales service.
change the phone
password
(
116
117
Access Codes
Access Codes
PIN
PIN2
The
P
ersonal
I
dentification
N
umber or PIN (4 to
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
8 digits) protects your SIM card against unauthorized
use. It is usually supplied with the SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To...
Refer to...
activate/deactivate the
PIN Check feature
page 90
To change the PIN2, refer to page 92
(
Menu 6.6.1).
page 91
Menu 6.6.2).
(Menu 6.6.6).
change the PIN
(
PUK2
The 8-digit PUK2 (
P
ersonal
U
nblocking
K
ey
2),
PUK
supplied with some SIM cards, is required to change
a disabled PIN2. If you lose the code, contact your
service provider.
The 8-digit PUK (
Personal
Unblocking
Key) is
required to change a disabled PIN. The PUK may be
supplied with the SIM card. If not, or you have lost
it, contact your service provider.
To re-enable your PIN2:
1. Key in the PUK2 and press the OK soft key.
To re-enable your PIN:
2. Enter a new PIN2 of your choice and press the
OK soft key.
1. Key in the PUK and press the OK soft key.
3. When the Confirm PIN2 message is displayed,
key in the same code again and press the OK
soft key.
2. Enter a new PIN of your choice and press the
OK soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and press
the OK soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
118
119
Health and Safety Information
Health and Safety
Information
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can
be well below the maximum value. This is because
the phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output of the phone.
Exposure to Radio Frequency (RF)
Signals
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on the safety standards
previously set by both U.S. and international
standards bodies:
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. The highest
SAR value for this model phone when tested for use
at the ear is 0.182W/Kg and when worn on the
body, as described in this user guide, is 0.164W/Kg
(Body-worn measurements differ among phone
models, depending upon available accessories and
FCC requirements). While there may be differences
between the SAR levels of various phones and at
various positions, they all meet the government
requirement for safe exposure.
• American National Standards Institute (ANSI)
IEEE. C95.1-1992
• National Council on Radiation Protection and
Measurement (NCRP). Report 86. 1986
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1996
• Ministry of Health (Canada), Safety Code 6.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model
phone is on file with the FCC and can be found
under the Display Grant section of
The exposure standard for wireless phones employs
a unit of measurement known as Specific
Absorption Rate (SAR). The SAR limit
*
recommended by the FCC is 1.6W/kg.
FCC ID A3LSGHV205.
* In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public
and to account for any variations in measurements.
120
121
Health and Safety Information
Health and Safety Information
For body worn operation, to maintain compliance
with FCC RF exposure guidelines, use only
Samsung- approved accessories. When carrying the
phone while it is on, use the specific Samsung-
supplied or approved carrying case, holster, or
other body-worn accessory.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Use of non-Samsung-approved accessories may
violate FCC RF exposure guidelines and should be
avoided.
For additional information concerning exposure to
radio frequency signals, see the following websites:
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
Federal Communications Commission (FCC)
RF Safety program (select “Information on Human
Exposure to RF Fields from Cellular and PCS Radio
Transmitters”):
Cellular Telecommunications Industry
Association (CTIA): http://www.wow-com.com
• If left unused, a fully charged battery will
discharge itself over time.
World Health Organization (WHO)
International Commission on Non-lonizing Radiation
Protection (select Qs & As):
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
United Kingdom, National Radiological
Protection Board: http://www.nrpb.org.uk
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
U.S.Food and Drug Administration (FDA)
Center for Devices and Radiological Health:
122
123
Health and Safety Information
Health and Safety Information
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
attention away from your primary responsibility,
driving safely.
124
125
Health and Safety Information
Health and Safety Information
Operating Environment
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where
lives are in danger, call the emergency number,
as you would want others to do for you.
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
10. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other
special non-emergency wireless
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
number.appears injured, or a vehicle you know
to be stolen, call roadside assistance or any
other special non-emergency wireless number.
recommendations of Wireless Technology Research.
126
127
Health and Safety Information
Health and Safety Information
Persons with pacemakers:
Vehicles
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if it is adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Users are advised to switch off the phone while at a
refueling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
128
129
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
130
131
Health and Safety Information
Health and Safety Information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Do not touch the phone with wet hands while it is
charging. Doing so may give you an electric
shock or damage the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
IMPORTANT SAFETY
INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
DANGER- TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
FOR CONNECTION TO A SUPPLY
NOT IN THE U.S. A., USE AN
ATTACHMENT PLUG ADAPTOR
OF THE PROPER
CONFIGURATION FOR THE
POWER OUTLET.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
132
133
Health and Safety Information
Health and Safety Information
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
FCC Compliance Information
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
• Consult the dealer or an experienced radio/ TV
technician for help.
2. This device must accept any interference
received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
134
135
Health and Safety Information
Health and Safety Information
Product with a rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be warranted
for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of
the original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants
to the original purchaser (“Purchaser”) that SAMSUNG’s Phones
and accessories (“Products”) are free from defects in material
and workmanship under normal use and service for the period
commencing upon the date of purchase and continuing for the
following specified period of time after that date:
Phone
1 Year
What Are the Limits On SAMSUNG’s Liability? EXCEPT
AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
Batteries
1 Year
Leather Case/ Pouch
Holster
Other Phone Accessories
90 Days
90 Days
1 Year
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited Warranty
does not cover: (a) defects or damage resulting from accident,
misuse, abuse, neglect, unusual physical, electrical or
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
•
•
electromechanical stress, or modification of any part of Product,
including antenna, or cosmetic damage; (b) equipment that has
the serial number removed or made illegible; (c) any plastic
surfaces or other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting from
the use of Product in conjunction with accessories, products, or
ancillary/peripheral equipment not furnished or approved by
SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g) Product
used or purchased outside the United States or Canada. This
Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
•
•
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS
OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME
DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE,
USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS
OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS
AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
What are SAMSUNG’s Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at SAMSUNG’s
sole option, without charge to Purchaser, any defective
component part of Product. To obtain service under this Limited
Warranty, Purchaser must return Product to an authorized
phone service facility in an adequate container for shipping,
accompanied by Purchaser’s sales receipt or comparable
substitute proof of sale showing the date of purchase, the serial
number of Product and the sellers’ name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG
will promptly repair or replace the defective Product. SAMSUNG
may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or
new parts or components when repairing any Product or replace
136
137
Health and Safety Information
Glossary
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS.
Active Flip
Ability to answer a call simply by opening the
phone.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE
DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG’s Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to
make modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
Line Identification Services (Caller ID)
©2002 Samsung Telecommunications America. All rights
reserved.
Services allowing subscribers to view or block the
telephone numbers of callers.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice.
[080802]
138
139
Glossary
Glossary
MMS (Multimedia Message Service)
PUK (PIN Unblocking Key)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when traveling for example).
SDN (Service Dialing Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
Multiparty Calling
Ability to establish a conference call involving up to
five additional parties.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
SMS (Short Message Service)
PIN (Personal Identification Number)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
140
141
Glossary
Soft Keys
Two keys marke
d
and
on the phone, the
purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Tri Band
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
142
Index
redialing automatically
A
•
95
Access codes • 117
Accessories •
Active folder • 95
Alarm, set (7.4) • 103
Alert type (5.3) • 83
Answering
time (3.4) • 77
9
via phonebook • 38
waiting (8.2) • 52
Camera (4) • 79
Card
installing the SIM • 17
,
108
a call • 26
Care • 132
Changing
a second call • 52
Anykey answer • 95
Auto light • 94
Auto power, alarm • 103
Auto redial (6.5) 95
password (6.6.4) • 91
PIN (6.6.2) • 91
PIN2 (6.6.6) • 92
Characters
changing mode • 44
entering • 43
Charging battery • 19
Conference call • 53
Connect tone • 86
Contrast (6.7.1) • 93
Copying
B
Background image • 88
Backlight • 15 93
Band selection (8.5) • 111
Battery
,
charging • 19
low battery indicator
memos • 99
phonebook number • 37
task • 101
•
20
precautions • 123
Correcting numbers • 23
Currency Exchange (7.6)
Broadcast (1.5) • 67
•
105
C
D
Calculator (7.5) • 104
Calendar (7.1) • 97
Caller ID (8.4) • 110
Calls
Date setting (7.3.2) • 102
Deleting
memos • 99
answering
messages • 62
a call • 26
missed calls • 28 76
phonebook number • 37
tasks • 101
,
a second call • 52
emergency • 130
ending • 24
forwarding (8.1) • 106
holding • 49
incoming (3.2) • 76
international • 23
making • 23
Display
contrast • 93
icons • 14
layout • 13
setting language • 90
Downloads (9.3) • 112
missed • 27 76
multiparty • 53
,
outgoing (3.3) • 77
records (3) • 76
143
Index
Index
Keypad tone (5.4) • 83
Keys
E
Muting
key tones • 51
searching/dialing • 38
speed-dialing • 41
Earpiece volume • 25
Editing
description • 11
location • 10
shortcut • 96
microphone • 50
storing numbers/names
My contents (1.7) • 69
•
34
memos • 98
messages • 62
missed calls • 27
phonebook number • 37
tasks • 100
to do list • 100
Photos, take • 79
Picture message, create • 73
PIN
,
76
N
Names
L
changing • 91
checking • 90
code • 118
Language (6.5) • 90
Last number, redial • 24
entering • 43
searching/dialing • 38
storing • 34
Emergency calls • 130
Error tone • 85
Length of calls • 77
,
86
PIN2
Letters
Network selection (8.3)
changing • 92
code • 119
changing mode • 44
entering • 43
•
109
F
Network services (8) • 106
Numbers
Power on/off (5.7) • 85
Problem solving • 114
PUK • 118
Light
backlight • 15
service • 16 94
FDN mode (6.6.5) • 92
Fixed Dial Number mode • 92
Folder tone (5.6) • 85
Forwarding calls (8.1) • 106
Funbox (9) • 112
,
93
copying phonebook • 37
correcting • 23
,
PUK2 • 119
Locking phone (6.6.3) • 91
Low battery indicator • 20
Lower-case characters
entering • 46
erasing • 37
fixed dial • 92
R
own • 89
Functions
pasting phonebook • 36
searching/dialing • 38
storing • 34
Read messages
multimedia (2.1) • 70
text (1.1) • 61
Redialing
automatically • 95
last number • 24
Reset setting (6.10) • 96
Ring
tone (5.1) • 82
type (6.3) • 83
volume (6.2) • 82
Roaming • 109
selecting • 30
M
G
Maintenance • 132
Memory status
message (1.8) • 69
phonebook • 42
Memos
Game (9.1) • 112
Greeting message (6.3) • 89
O
Options
selecting • 30
H
Organizer (7) • 97
Outgoing calls (3.3) • 77
Own number (6.4) • 89
copying • 99
deleting • 99
editing • 98
writing • 98
Holding calls • 49
I
Icons
P
Menus
S
accessing by scroll • 55
accessing by shortcuts
Password, phone
changing • 91
code • 117
description • 14
Safety
Identifying a caller • 26
Incoming calls (3.2) • 76
Infrared activate (6.1) • 87
Internet • 112
•
56
information • 120
list • 56
Phone
precautions •
Schedule • 97
7
Message tone (5.5) • 84
Microphone, mute • 50
Minute minder • 86
lock (6.6.3) • 91
password • 117
settings (6) • 87
Phonebook
Searching in phonebook • 38
Security (6.6) • 90
IrDA port • 87
Missed calls • 27 76
,
Selecting functions/options
Morning Call • 103
K
copying • 37
editing • 37
erasing • 37
options • 36
pasting • 36
•
30
Sending
key tones • 51
messages • 63
Service light • 16 94
Multimedia message, view
Key tones
•
70
adjusting volume • 25
muting • 51
selecting (5.4) • 83
sending • 51
Multiparty calls
dropping • 54
making • 53
private conversation • 53
,
144
145
Index
Setting
Tone
connect • 86
alarm (7.4) • 103
date (7.3.2) • 102
language (6.5) • 90
time (7.3.1) • 102
Shortcut (6.9) • 96
Silent mode • 30
SIM card
error • 85
folder • 85
keypad • 83
message • 84
power on/off • 85
ring • 82
installing • 17
Travel adapter • 19
locking • 92
SIM Lock (6.6.5) • 92
SMS
U
message icon• 61
setup • 65
Unpacking •
Upper-case characters
entering • 46
9
using • 52 61
,
Soft keys • 30
Solving problems • 114
Sound settings (5) • 82
Speed-dialing • 41
Switching on/off
V
Vibration • 83
Voice mail (1.6) • 68
Voice server • 68
Volume
microphone • 50
phone • 21
adjusting • 25
selecting the ring • 82
T
T9 mode • 45
W
Tasks
defining • 99
editing • 100
Templates (1.3) • 65
Text
Waiting call • 52, 108
WAP browser (9.2) • 112
World time (7.3.3) • 102
Write messages
changing mode • 44
entering • 43
picture (2.3) • 73
text (1.2) • 63
Text messages
broadcast (1.5) • 67
reading (1.1) • 61
setup (1.4) • 65
templates (1.3) • 65
writing (1.2) • 63
Time
Writing memos • 98
call • 77
format (7.3.4) • 102
setting (7.3.1) • 102
world (7.3.3) • 102
To do list (7.2) • 99
146
147
148
|