Samsung
( S G H - T 1 0 5 G
M O B I L E P H O N E
User Manual
S e r i e s )
Please read this manual before operating your
phone, and keep it for future reference.
GH68-25121A
Printed in China
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.
Open Source Software
Some software components of this product incorporate source code covered under
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),
OpenSSL License, BSD License and other open source licenses. To obtain the
source code covered under the open source licenses, please visit:
SAR Information
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based
on the safety standards that were developed by independent scientific organizations
through periodic evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless phones employs a unit of measurement known
as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.
The highest SAR values for this model phone were Head: 1.07 W/kg, and
Body: 0.80 W/kg.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
T105G_UDIJ1_MM_102609_F6
SIM Card Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Turning the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Main Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Sentbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
1
Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using Message Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Deleting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adding a New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Managing Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Time & Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Master reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2
Section 1: Getting Started
This section describes the first steps to operating your phone.
SIM Card Information
When you subscribe to cellular network services, you receive a plug-in Subscriber
Identity Module (SIM) card loaded with your subscription details, such as your PIN,
and available optional services.
Activating Your Phone
Activating your phone requires several things: inserting the SIM card, charging the
battery, and turning the phone on.
ᮣ
If necessary, power-off the phone by pressing and holding
off image is displayed.
until the power-
Removing the Battery
1. Press the back cover down from the top back of the phone (1) while pressing
in on the cover release near the bottom (2). Lift up and remove the back cover
from the phone.
Getting Started
3
2. Lift the battery up (1) and away from the phone (2).
Installing and Removing the SIM Card
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending.
Use caution when inserting or removing the SIM, and keep all SIM cards out of reach
of children.
1. Remove the back cover and battery.
2. With the gold contacts facing down, slide the SIM card completely into the
socket with the notched end oriented as shown.
4
3. To remove the SIM, slide it gently out of the socket.
Note: The angled corner of the SIM should be inserted as shown in the diagram on the phone. The
correct SIM orientation is necessary for your phone to recognize the SIM.
Replacing the Battery
1. To reinstall the battery, with the battery cover open, align the battery contacts
with the pins in the battery compartment in the phone (1).
2. Press the battery down until it clicks into place (2). Make sure that the battery
is properly installed and not obstructing the SIM card before replacing the
cover.
Getting Started
5
3. With the battery in position in the phone, align the back cover on the phone
(1) and slide gently upward (2) until the cover clicks into place.
Note: The battery must be properly installed before charging the battery or switching on the
phone.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. Use the wall charger to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A fully
discharged battery requires up to 4 hours of charge time.
Note: For connection to an electrical supply outside of the U.S., you must use an adaptor properly
configured for the power outlet. Using the wrong adaptor can damage your phone and void
your warranty.
Note: If the battery level becomes too low, the phone automatically turns off. Recharge your
battery.
6
1. Plug the connector of the wall charger jack into the port on the side of the
phone.
Incorrect
Correct
Note: This illustration shows both the correct method and the incorrect method for connecting the
charger. If you connect the charger incorrectly, you risk damaging the accessory port and
voiding the phone warranty.
2. Plug the adaptor into a standard AC wall outlet.
3. When the phone is completely charged (
), unplug the charger from the
power outlet.
4. Remove the adapter from the phone by gently pulling the connector out.
Important!: The battery charging function may stop if you are on a call while charging your battery.
Note: Do not remove the battery from the phone during charging. You must unplug the adapter
from the phone before removing the battery to avoid damage.
Turning the Phone On or Off
1. Press and hold the
key or the
key until the phone power-on
screen displays.
Getting Started
7
Note: Do not turn on the phone when mobile phone use is prohibited.
2. If the phone asks, enter a password and press the OK soft key or the
key.
The Idle screen displays while the phone searches for your network. The
signal strength bars show adequate signal after a network is found.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For more information, see Phone settings on page 43.
3. When you wish to switch off the phone, press and hold the
key.
Setting Up Your Voice Mail
ᮣ
In Idle mode, press and hold the
key. When connected, follow the voice
prompts from the voice mail center.
Text Conventions
The following terms and icons appear in this manual to describe the steps and
procedures for using your phone:
highlight
UsetheNavigationkey(
)tomoveahighlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
press the
key to launch, access, or save a
highlighted menu item or screen field of interest.
➔
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings
➔
Phone
➔
Language...”
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone:
•
•
User friendly, menu-driven access to features and options
Featured applications provide alarms, calendar, calculator, converter, timer, stopwatch, and
world time.
•
Speakerphone capability
Front View of Your Phone
The following illustrations show the main elements of your phone:
1
11
2
10
3
9
8
4
5
7
6
Understanding Your Phone
9
Keys
The following list correlates to the front view illustrations.
1. Earpiece: Used to listen to audio.
2. Left soft key: In the Idle screen, press the Menu (left) soft key
to access
your Main menu. The left soft key allows you to select the function indicated
by the screen text on the bottom left of the display. For more information
3. Navigation key: Allows you to scroll through menus, to adjust the volume during a
call, to access Create message and Messages folders and to change you sound
profile.
4. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Call log. If you press and hold the key down,
you will initiate the most recent call from the Recent Call log.
5. Keypad Lock: Allows you to quickly lock your keypad. To unlock, press the
Unlock soft key and press and hold the
key.
6. Microphone: Allows the other callers to hear you when you are speaking.
7. Space/Silent key: Allows you to enter a space when entering text. Press and
hold to toggle between Normal and Silent modes.
8. Keypad: Allows you to enter numbers, letters, and characters.
9. Power On/Off/Menu Exit key: Ends a call or exits a program. Press and hold
this key for a few seconds to power your phone On or Off. While in the main
menu, it returns the phone to standby mode and cancels your input. When
you receive an incoming call, press to reject call.
10
10. Right Soft key: In the Idle screen, press the Contacts (right) soft key
open your Contact list. When in menu mode, the right soft key
Back.
to
function is
11. Display: Allows you to see when you have an incoming call or message. It also
displays date, time, network type, signal strength, and battery power icons,
and any icons associated with alerts or alarms.
Main Display Layout
The display has 3 areas:
Icons
Text and
graphics
Soft key
functions
Understanding Your Phone
11
Icons
Showsthereceivedsignalstrength. Thegreaternumber
of bars indicates a stronger signal.
Appears when you receive a new text message.
Appears when you receive a new voicemail message.
Appears when you set an alarm on your phone.
Appears when a call is in progress.
Appears when there is no network coverage available.
When you are out of the service area, you cannot make
or receive voice calls.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Note: The default Profile is Normal. The profile is editable, and the displayed icons may vary
according to the settings. To edit Profile settings, press Menu Settings Profiles
➔
➔
.
12
Appears when the Normal Profile (default) is active.
Press and hold the Space key to toggle between
Normal mode and Silent mode. You can edit these Normal
profile settings.
Appears when the Silent Profile is set. In Silent mode,
your phone displays information, but the speaker is
muted and the phone vibrates to alert you. You can edit
these Silent profile settings.
Appears when the Profile is set to Driving. In Driving
mode, the speaker is active and launches the currently
selected ringtone or melody when the associated
notification is activated. This icon is accompanied on
screen by the Audio icon. You can edit these Driving
profile settings.
Appears when the Meeting Profile is set.
In Meeting mode, you can change the settings for the
following options: Call alert type, Message alert type,
Keypad tone and Volume.
Appears when the Profile is set to Outdoor. In this case,
the speaker is active, the volume settings are raised to
their highest levels, any currently active ringtones or
melodies are activated, and the phone’s vibrate feature
is activated. You can edit these Outdoor profile settings.
Understanding Your Phone
13
Appears when the Profile is set to Offline.
In Offline mode, you can edit the settings for the Keypad
tone:Beep,XylophoneorMuteandadjusttheVolumeup
or down for the Keypad tone and the Alert tone.
Appears when the Profile is set to My profile 1.
Use the My profile 1 to create a unique profile by setting
the following options: Call alert type, Call ringtone,
Messagealerttype,Messagealerttone,Keypadtoneand
Volume.
Appears when the Profile is set to My profile 2.
Use the My profile 2 to create a unique profile by setting
the following options: Call alert type, Call ringtone,
Messagealerttype,Messagealerttone,Keypadtoneand
Volume.
Backlight
A backlight illuminates the display and the keypad when you press any key. It turns
off when no keys are pressed within a given period of time, and/or dims the light,
depending on the settings in the Settings
➔
Display
➔
Light menu.
14
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your use. These
functions are arranged in menus and sub-menus, accessed using the two soft keys.
Each menu and sub-menu allows you to view and alter the settings of a particular
function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the
key.
When you access a list of options, your phone highlights the currently active option.
If there are only two options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that you can select it directly.
Selecting Options
To view the various functions and options available and to select the one you want:
•
•
Press the appropriate soft key.
To select the function displayed or the option highlighted, press the Select soft key or the
key.
•
To view the next function or highlight the next option on a list, press the Down Navigation
key.
•
•
•
To move back to the previous function or option on a list, press the Up Navigation key.
To move back up one level in the menu structure, press the Back soft key.
To exit the menu structure without changing the settings, press the
key.
Soft Keys
The roles of the left and right soft keys vary depending on the function you are
currently using. The active function for each soft key is shown at the bottom of the
display above each key.
Understanding Your Phone
15
Left Soft Key
Some functions of the left soft key are as follows.
•
•
In the Idle screen, press the Menu (left) soft key
When in a menu mode, the left soft key
to open the Menu screen.
.
function is Select
Right Soft Key
Some functions of the right soft key are as follows.
•
In the Idle screen, press the Contacts (right) soft key
screen.
to open the Contact list
•
When in a menu mode, the right soft key
function is Back
.
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
•
•
•
Press and hold the End key to turn on/off your phone.
Briefly press
Press
once to disconnect a call.
to return to standby mode from any menu.
Send Key
The Send key
is used to power-on your device, answer calls, dial calls, and
to recall the last number(s) dialed, received, or missed.
•
•
•
•
•
•
Press and hold
Press once to answer calls.
Enter a number and briefly press
to power-on your device.
to make a call.
Briefly press
Press
in standby mode to display a list of recent calls to and from your phone.
twice in standby mode to call the most recent number.
to pick up a waiting call.
Press
16
Navigation Key
Use the directional keys on the Navigation key to browse menus, sub menus, and
lists. Press the Up or Down Navigation keys when jumping to highlighted links on the
web. The Up or Down Navigation keys also adjust the Ring volume in the Idle screen
and, in a call, they allow you to adjust the earpiece volume. The Right and Left
Navigation keys provide a shortcut to launch applications from the Idle screen.
Ring Volume
Create message
Messages
Ring Volume
Understanding Your Phone
17
Section 3: Call Functions
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
In Idle mode, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Voice Calls menu, the phone will
automatically redial up to 10 times when the person does not answer the call or is already
on the phone. For more information about Voice Calls, see page 44.
Making an International Call
1. Press and hold
. The + character appears.
2. Enter the country code, area code, and phone number, then press
.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when dialing.
1. After entering a number
•
•
To clear the last digit displayed, press the Clear soft key.
To clear another digit in the number, press the Left or Right Navigation key until the
cursor is immediately to the right of the digit to be cleared. Press the Clear soft key
.
•
To enter a missing digit press the Left or Right Navigation key until the cursor is in
position and enter the digit.
2. Press
to return to the Idle screen.
Ending a Call
When you want to finish your call, briefly press
.
18
Manual Pause Dialing
When you call automated systems, you are often required to enter a password or
account number. Instead of manually entering the numbers each time, you can dial
the numbers along with special characters called pauses.
To manually call a number with pause(s) without storing it in your Contact List:
1. In Idle mode, enter a phone number.
2. Press and hold the
key to add a two-second pause. The letter
P
appears where the pause is set.
3. Continue to enter numbers, if desired.
Tip: You can create pauses longer than two seconds by entering multiple pauses.
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Address Book, the associated name displays.
To access the Recent Calls menu:
1. From the Idle Screen, press Menu
➔
Call records ➔ Recent calls.
Tip: You can quickly access your Recent Calls by pressing
.
2. Use the Navigation keys to scroll through the Recent Calls options. Choose
from Recent Calls, Missed Calls, Received Calls and Dialed Calls.
3. Highlight the number you want, then press
to dial the number.
Making a Call from your Contact List
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Contact list.
Call Functions
19
Once you have stored a number in the Contact list, you can dial it by pressing a
few keys by storing the contact in your Favorites.
Answering a Call
When a call is received the phone rings and displays the caller’s phone number, or
name if stored in the Contact list.
1. From the Idle Screen press
.
If you wish to activate the Anykey answer option, press Menu ➔ Settings
➔ Call ➔ All calls ➔ Answering mode. When you activate the Anykey
answer option, you can press any key to answer a call except
and the
Reject soft key.
Note: To reject an incoming call, press the Reject soft key.
2. End the call by pressing
.
Note: You can answer a call while using the Address Book or menu features. After ending the call,
the phone returns to the function screen you were using.
Recent Calls
The phone stores the numbers of the calls you have Missed, Received or Dialed in
the Recent Calls menu. You can quickly access this menu from the Idle screen by
pressing the
key. If the number or caller is listed in your Address Book, the
associated name displays. Press the Right or Left Navigation key to review your
Missed, Received or Dialed calls in the Recent Calls menu.
20
Viewing All Calls
From the Call records menu, select the Recent calls option. All calls made, received,
and missed are listed. Press the Options soft key in any of these lists for the
following options:
•
•
•
•
•
•
•
•
•
View: allows you to view the call details.
Call: allows you to call the number you are viewing.
Send message: allows you to send a message to the caller associated with this call record.
Delete: allows you to delete the call record you are viewing.
Delete all: allows you to delete all call records.
Save: allows you to create a new contact from this call record.
View contact details: allows you to view the call details.
Copy to dialing screen: allows you to copy the call record number to your dialing screen.
Add to reject list: allows you to add the sending number to your Reject List, where
incoming calls are sent direct to voice mail.
•
Call manager: provides information about Call duration for Last call, Dialed calls, Received
calls or All calls. You can choose the option to reset the information in one of the these
categories or in all of them.
Viewing Missed Calls
The number of calls you have missed is displayed on the Idle screen.
To view the number details:
1. Press the View soft key. The most recently missed call is displayed.
Note: If there is a voicemail sent by the same number, associated icons are displayed and can then
be selected.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. To move to another call type, press the Left or Right Navigation key.
Call Functions
21
Viewing the Details of a Missed Calls
To view the details of a selected missed call, use the following steps:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Select the desired missed call.
3. Press the Options soft key, then select View.
Calling Back a Missed Call
To call back a missed call number:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Highlight the desired missed call.
3. Press the Options soft key, then select Call
.
- Or -
4. Highlight the number and press the
key.
Saving a Missed Call to your Address Book
To save the missed call entry to your address book, use the following steps:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Select the desired missed call.
Note: You may see different choices depending upon the settings for your “Save New Contacts to”
option.
3. Press the Options soft key, then select Save and follow prompts to add caller
to Contact list.
22
Sending a Message to a Missed Call
To send a text message or attachment to a missed call entry:
1. Immediately after missing a call, press the View soft key. A list of missed
calls is displayed with the most recently missed call highlighted. Highlight the
number of the missed call you wish to send a message.
2. Press the Options soft key, then select Send Message. The Create Message
screen displays. Create your text message. For more information, refer to
3. When you are ready to send your message, press Options ➔ Send to send
your message to the selected number.
4. In the Recipient List, you can press the Options ➔ Send to send a message
to the caller or press Options ➔ Add recipients to enter additional recipients
from your contacts or from other recent recipients. You can also save to drafts
or cancel your message.
5. To send you message, press the Options ➔ Send. Your display returns to
your Recent Calls list.
Deleting a Missed Call
To delete a missed call entry:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key, then select Delete. The call log is deleted
immediately.
Note: You can press the
key at any time to exit the Missed Call feature.
Call Functions
23
Call Time
1. From the Idle screen, press the Menu ➔ Call records ➔ Call manager ➔
Call duration to see the following options:
• Last call: shows the length of time for the last call.
• Dialed calls: shows the total length of time for dialed calls.
• Received calls: shows the total length of time for received calls.
• All calls: shows the total length of time for all calls.
2. Press the Options soft key to choose from the following options:
• Reset
:
allows you to reset the call duration for the selected call record and
return to the Call duration screen.
• Reset all allows you to reset the call duration for all call records. When you
:
select Reset all, a prompt displays, “Are you sure?” Select the Yes soft
key to reset or the No soft key to cancel. Then you are returned to the Call
duration screen.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Adjusting the Call Volume
Adjust the earpiece volume during a call by pressing the Up and Down Navigation
keys. Press the Up Navigation key to increase the volume level and press the Down
Navigation key to decrease the volume level.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1. While on a call, press the Hold soft key to place your call on hold.
2. You can later reactivate this call whenever you want by pressing the Retrieve
soft key.
24
Making a new call while you have a call in progress
1. While on a call, press the Hold soft key.
2. Enter the new phone number you wish to dial or look it up in the Contact list.
3. Press
to dial the second number.
- or -
4. Press the Options soft key, then select New Call. Enter the number to call or
search in your Contact list or Favorites. Press to dial the second
number. Once connected, both calls are displayed on the screen.
Note: The caller currently on hold appears greyed-out onscreen.
Switching between the two calls
1. Press the Swap soft key. The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that you can continue
conversing with that person.
2. Press
to end the currently active call.
Multiple calls
If you are in a call, you can place the active call on hold by selecting the New Call
option above and either dialing another number or answering another incoming call.
Once the second call has been activated, the following options are available.
•
•
Swap: Places the active call on hold and then re-activates the call on hold.
Join: Joins all of the calls you have established with your phone (both active and on hold)
into a multi-party call.
•
Transfer: Allows you to transfer an call to another number.
Call Functions
25
Note: You must contact your Service Provider regarding the availability of the Join option and the
Transfer option.
When you want to finish, end each call normally by pressing the
Ending a specific call
key.
1. Place the call you wish to end on hold.
2. Press the Options soft key, then select End ➔ Held call.
3. Press the Select soft key to end the call on hold.
4. Press
to end the last remaining call.
In-Call Options
During a call, press the OK key to turn the Speaker On or Off.
Press the Options soft key to access the following:
•
•
•
Speaker on/off: turns your microphone on and off.
Mute/Unmute: allows you to mute and unmute your phone.
Mute keys/Send keys: silences/mutes the key tones when on the call. To turn this feature
off (unmute the keypad), return to this option and select Send keys
.
•
New call: Places the current call on hold and then allows you to enter and dial another
number or access your Contact List.
•
•
•
•
Contacts: allows you to access your Contact list.
Create contact: allows you to create a new contact using the number of the current call.
Update existing: allows you to update an existing contact with the current number.
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have
selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in
phones for tone dialling, sounding when you press the number keys. This option is helpful
for entering a password or an account number when you call an automated system, like a
banking service.
26
•
•
Message: allows you to create a message or to access messages in these folders: Inbox,
Sentbox, Outbox and Drafts.
End call: allows you to end the active call.
Using the Speakerphone During an Active Call
While in an active call, it is possible to enable the speakerphone feature.
1. Dial the number and press
2. Once the call is answered, press
Muting or Sending Keypad Tones
.
to activate the speakerphone.
These options allow you to turn the key tones off or on. If the Mute keys option is
selected, it allows you to press keys without hearing key tones during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send
Keypad Tone option must be selected.
Switching off the Microphone (Mute)
During a call, you can temporarily switch your phone microphone off so that the
other person cannot hear you.
ᮣ
Press the Options soft key, then press Mute/Unmute. The Mute option is then
replaced with Unmute.
Searching for a Number in Address Book
You can search for a number from the Address Book during a call.
1. Press the Options soft key, then select Contacts ➔ Contact list.
2. Highlight the Contact List entry.
- or -
Enter the first few letters of the contact into the Search field to highlight the
closest match.
Call Functions
27
3. Press Options ➔ View or
to view your selected contact.
Call Waiting
The Call Waiting feature alerts you of an incoming call while you have a call in
progress, if this service is supported by the network.
To activate the Call waiting feature, press Menu ➔ Settings ➔ Call ➔ Voice calls
➔
Call waiting and select Option ➔ Activate.
To answer a call while you have a call in progress:
1. While on a call, press
or press the Accept soft key to answer a new
incoming call. The first call is automatically put on hold when you answer the
new incoming call.
2. To switch between the two calls, press the Swap soft key. Swap places the
current call on hold and then activates the previous call.
To end a call on hold:
1. Press the Options soft key, then select End ➔ Held call You can continue
.
with the remaining call.
2. Press
to end the current active call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls
and place them on hold. If this service is supported by the network, all calls can be
joined together. You are notified of an incoming call by a call waiting tone.
Note: The Join option combines all of the calls you have established with your phone (both active
and on hold). Swap places the current call on hold and then activates the previous call.
28
1. Press
to answer the first incoming call.
2. Press
to answer the next incoming call. The first call is automatically
put on hold.
3. Join the first two callers by pressing the Options soft key, then selecting
Join. Join combines your current set of callers into a single multi-party call,
both active and on hold.
4. Press
to end the call.
Silent Mode
Silent mode is convenient when you wish to stop the phone from making a sound, in
a theater, for example.
In Idle mode, press and hold
until the phone vibrates, the “Silent profile on”
message appears on screen. The Silent mode icon
is displayed on the screen.
In Silent mode, your phone speakers are muted. An incoming call causes the phone
to vibrate and light up, depending on the settings of the Silent Phone Settings
feature.
To exit and reactivate the previous sound settings, press and hold
again until
the previous Sound Profile is restored. The Silent mode icon is no longer displayed.
Call Functions
29
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also includes an
overview of all the available menus associated with your phone. Some menu
options are controlled by the SIM provided by your service provider.
Menu Navigation
Menus and sub-menus can be accessed by scrolling through them using the
Navigation keys or by using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the Navigation keys to reach a main menu, Settings, for
example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Profiles, for example, you can access them
by first highlighting the option and then by pressing the Select soft key or the
key. If the menu you have selected contains further options, repeat this
step.
4. To scroll through these menus, press either the Up or Down Navigation key
or the Volume key (located on the left side of your phone). Press the Select
soft key, or the
key to make your selection.
5. To return to the previous menu level, press the Back soft key.
6. To exit the menu without changing the settings, press the
key.
30
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 9) corresponding to their location on
the screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
4. Press the
key for Settings.
key for Phone
key for Language.
Menu Navigation
31
Section 5: Messaging
This section describes how to send or receive text messages. It also includes the
features and functionality associated with messaging.
Creating and Sending New Messages
1. In Idle mode, press Menu ➔ Messages ➔ Create Message. The Create
Message screen displays with a field to enter your recipient.
Tip: To quickly access the Create Message screen, press Left Navigation key.
2. Enter the number for the recipient in the field provided, or press the Options
soft key, then press Add recipients to choose from your Contact list or from
your Recent recipients list.
3. While composing your message text, you can press the Options soft key to
choose from the following options:
•
Add recipients: allows you to add recipients from your Contact list and from your
Recent recipients.
•
•
Add symbol: allows you to enter symbols in your message.
Add text: allows you to enter text from your text templates or to attach a name card to
your message.
•
Writing options: allows you to set the text Imput method: T9Abc, T9ABC, T9abc, Abc,
ABC, abc, Numeric or Symbols; and to select the Writing language: English or Español.
•
•
Save in Drafts: allows you to save your message to your Drafts folder.
Sending options: allows you to keep a copy of your message. The following options
may be available according to your service provider: Reply path, Request delivery, Keep a
copy, Validity period and Maximum.
•
Exit: allows you to Exit without saving or to Exit and Save your message in Drafts.
32
4. When you have finished composing your message, press Options ➔ Send to
send the message to the selected recipients.
Viewing New Received Messages
1. In Idle mode, new messages are indicated by icons and a New Messages pop-
up.
The following icons indicate the message type.
• indicates a new Voicemail message.
• indicates a new Text message
2. Press the View soft key or the
key. The Messaging – Inbox screen
displays and lists information about the incoming messages.
Note: If you exit from this View screen, you will need to navigate to your Inbox (Menu
➔
Messages
➔
Inbox), the Recent Calls screen, or you will need to dial your Voicemail contact to access
your messages.
3. Use the navigation keys to highlight a message you wish to view, then press
the key. The selected message appears in the display.
4. To scroll through the message (if additional text pages have been added),
press the Up or Down key.
5. When you have finished, press the
key.
Using Message Options
Message options at the Inbox level differ according to the message type, what you
have done with the message, and whether you are viewing the message.
Messaging
33
ᮣ
While viewing the list of messages in the Inbox, you can highlight a message and
press the Options soft key to access the following message options:
• View: allows you to view your message.
• Reply: allows you to compose and send a reply to the message.
• Forward: allows you to forward the message.
• Delete: deletes the message you selected.
• Delete multiple: allows you to delete multiple selected messages or all messages.
• Add to contact: allows you to add the caller to your contacts.
• Block by address: allows you to block messages from this address. You can create a list
of up to 10 addresses.
• Move to Phone/Move to SIM: allows you to transfer your message to your phone memory or to
your SIM.
• List by: allows you to sort your list by Read/Unread, Date, Sender, Types, Subject or Size.
• Protection on/off prevents/allows deletion of this message.
:
ᮣ
While viewing a selected message, you can press the Options soft key to access
the following message options:
• Reply allows you to compose and send a reply to the message.
:
• Forward: allows you to forward the message.
• Delete: deletes the message you are currently viewing.
•
Add to Phonebook: allows you to add to an existing contact or create a new contact.
• Cut address: allows you to paste this message address into a send field or into a new
contact field.
• Block by address allows you to block messages from this address. You can create a list
:
of up to 10 addresses.
• Move to phone/Move to SIM: If a message is stored in the SIM card, it is saved to the phone’s
memory. If a message is stored in the phone’s memory, it is then saved to the SIM card.
• Protection on/off prevents/allows deletion of this message.
:
34
Inbox
The Inbox message box stores copies of messages you received.
Sentbox
The Sentbox message box stores copies of messages you sent.
Outbox
The Outbox message box stores copies of outgoing messages, both those sent
successfully and those that failed. The recipients’ phone numbers or names display
in the outbox, if this information is available in your Address Book.
Drafts
The Drafts message box stores unsent messages that you want to edit or send at a
later time.
Using Message Templates
Your phone has Text and Multimedia message templates that you can retrieve and
apply when creating a message. You can change the applied template as needed
before sending a message.
1. In Idle mode, press the Menu soft key, then select Messages ➔ Templates.
The Text Templates display.
2. Highlight a current template message and press the Options soft key to
access the following options:
• Send Message: allows you to create and send a message using the selected template.
• Edit: allows you to change the currently selected template.
• Delete: deletes the currently selected template.
3. When you have finished, press
.
Messaging
35
Deleting Messages
When your phone’s memory is full, an error message displays and you cannot
receive any new messages. Use the Delete option erase obsolete messages, freeing
memory for new messages.
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
Deleted Individual or Multiple Messages
1. In Idle mode, press the Menu soft key, then select Messages.
2. Select a message folder (Inbox, Sentbox, Outbox or Drafts). A list of
messages in the folder appears in the display.
3. To delete an individual message, highlight that message.
4. Press the Options soft key, then select Delete. The following options appear in
the display:
• Delete: deletes this message, provided it is unlocked.
• Delete multiple: allows you to select multiple messages to delete or to specify delete all
messages.
Select the desired option.
5. At the “Delete?” prompt, press either the Yes soft key to confirm the deletion
or the No soft key to cancel.
Messaging Settings
You can set up various options for using messaging services.
1. In Idle mode, press Menu ➔ Messages ➔ Settings.
2. Select the type of message settings that you want to change.
• Text Messages
• Voice mail number
36
3. Press the Select soft key or the
key.
Text Message
The following options are available:
•
•
Sending options: allows you to keep a copy of your sent messages.
Block number: allows you to create a block number list.
Voice Mail
The following options are available:
•
•
Connect to voice server: connects you to your voice server.
Voice server number: stores the number used for access to the phone’s remote voicemail.
Messaging
37
Section 6: Understanding Your Contact List
This section allows you to manage your Contacts by storing their names and
numbers in your Contact list.
Using Contacts
Dialing a Number from the Contact list
Once you have stored phone numbers in the Contact list, you can dial them easily
by highlighting the number you wish to call and selecting Options ➔ Call.
Note: You can access your Contacts from the Idle screen by pressing the Contacts soft key.
Finding an Contacts list Entry
You can store phone numbers and their corresponding names onto your SIM card.
1. In Idle mode, press the Menu soft key, then select Contacts ➔ Contact list.
2. Enter the first few letters of the name.
The Contacts entries are then listed, starting with the first entry matching
your input.
3. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
4. Once you have found the entry, press
to dial the number, or press the
Options soft key to access the Contact list entry options.
38
Contact List Entry Options
While in the Contact list with any of the default entries highlighted, press the
Options soft key to use access the following options:
•
View
to the Contact list.
Call allows you to call a currently selected entry.
Send message
Create contact
:
provides you with details about that contact entry. Press the Back soft key to return
•
•
•
•
:
:
allows you to send a text message to the selected entry.
:
allows you to add a new entry to either your Phone or SIM card.
Delete: allows you to delete the selected contact entry from a target location such as the
Phone and/or SIM card.
•
•
•
•
Delete all: allows you to delete All, Phone entries or SIM entries.
Edit: allows you to edit the contact information.
Writing options: allows you to select the Input method and the Writing language.
Copy to: allows you to copy all or a selection to your Phone/SIM.
Adding a New Contact
In the Idle screen, enter the number you wish to call and press Options ➔ Create
contact. Select the type of number, Mobile, Home, Fax or Other and at the prompt
enter the name of the contact in the Name field.
Also, you can create a new contact from the Idle screen by pressing Menu ➔
Contacts ➔ Create contact. Enter the Name and number in the fields provided.
Understanding Your Contact List
39
Favorites List
You can assign up to 8-Favorites entries and then dial them easily whenever you
want, simply by pressing and holding the associated numeric key.
You can set up Favorites entries by going to Menu
➔
Contacts
➔
Favorites and
selecting an Empty position in your Favorites list. Highlight that Empty position and
press the Add soft key. Scroll to the contact you wish to assign to that Favorites
position. To quickly call that contact from the Idle screen, press and hold the
number assigned in the Favorites list.
Own Numbers
The Own Numbers menu selection stores the number assigned to the SIM in your
phone.
ᮣ
From the Idle screen, press Menu
➔
Contacts
➔
Own numbers.
Note: You can change the number assigned to your SIM that displays in the Own Numbers menu,
but entering another number prevents you from making or receiving calls on the handset.
You may also add other names and numbers into your phone for easy referral.
Managing Contacts Entries
You can View contacts from your Phone and SIM, from your Phone only or from your
SIM only. You can save, copy and delete Phone and SIM entries on your phone and
delete all.
ᮣ
In Idle mode, press the Menu soft key, then select Contacts ➔ Management.
40
Section 7: Changing Your Settings
This section includes tips on how to use some of use some of your phone features,
as well as how to change and customize the display settings, call handling, security
settings, and other settings associated with your phone.
Profile
You can customize various sound profiles for your phone by changing the sound
settings.
1. In Idle mode, press the Menu soft key and select Settings
2. Highlight one of the following sound profiles:
➔
Profile.
• Normal: The Normal profile allows you to customize your alerts.
• Silent
:
The Silent profile causes the speaker to be muted and the phone only
vibrates or displays information on its LCD.
• Driving The Driving profile keeps the speaker active and will launch the
:
currently selected ringtone or melody when the associated notification is
activated.
• Meeting
:
The Meeting profile mutes the alerts.
• Outdoor
:
The Outdoor profile keeps the speaker active, the volume settings
are raised to their highest levels, any currently active ringtones or melodies
are activated, and the vibrate feature is activated. This Outdoor icon
displays.
• Offline The Offline profile allows you to select a keypad tone: Beep,
:
Xylophone or Mute and to set the Volume for the Keypad tone and the Alert
tone.
• My profile 1: The My profile 1 setting allows you to set the Call alert type, Call ringtone,
Message alert type, Message alert tone, Keypad tone and Volume.
• My profile 2: The My profile 2 setting allows you to set the Call alert type, Call ringtone,
Message alert type, Message alert tone, Keypad tone and Volume.
Changing Your Settings
41
3. Press the Options soft key to Save or Edit the highlighted profile.
4. To Edit your setting, press the Change soft key to make a new selection.
5. Press the Save soft key when you are finished.
Display
In this menu, you can change various settings for the display: Wallpaper, My theme,
Power saving mode or Light.
ᮣ
In Idle mode, press the Menu soft key and select Settings
➔
Display.
•
Wallpaper: allows you to make a selection from the default wallpapers or to have them
randomly displayed.
•
My Theme: allows you to choose your theme from the following options: Ocean, Skyline,
Emerald, Samsung theme or Plum. Highlight your selection and press Save to select and
save.
•
•
Power saving mode: allows you to turn ON or OFF the Power saving mode. Highlight your
selection and press OK to save.
Light: allows you to adjust LCD Brightness, LCD Contrast, Backlight time and Keypad light.
Use the Navigation keys to highlight you selection. Press the Select soft key to save your
selection.
Time & Date
This menu allows you to change the format for the current time and date display.
ᮣ
In Idle mode, press the Menu soft key and select Settings
➔
Time and Date.
Phone
The Phone settings menu allows you to set the language option for your phone to
Automatic, English or Español and to turn on or off the Keypad auto-lock feature.
ᮣ
In Idle mode, press Menu ➔ Settings
➔
Phone.
42
Note: When the Keypad auto-lock feature is on, your phone automatically locks your keypad when
the phone has been idle for a while. To unlock your phone, press the Unlock soft key, then
press OK.
The following options are available. Use the Down Navigation key to scroll to and
set options:
•
Language: allows you to select a display language. Press the Save soft key to save your new
selection. Options include:
–
Automatic: the language is automatically selected according to the language of the SIM card
used.
–
–
English: the selected phone language is changed to English.
Español: the selected phone language is changed to Spanish.
•
Keypad auto-lock: allows you to turn ON or OFF this feature.
Security
Security enables you to restrict the use of your phone by the others and to restrict
the types of calls. Various codes and passwords are used to protect the features of
your phone. The following options are available. Use the Up or Down Navigation key
to scroll to and set options.
•
Phone lock: when enabled, the phone is locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on. To change the phone password, see Change
until you switch it off. The following options are available:
–
Off: you are not asked to enter the phone password when you switch on the phone.
–
On: you are required to enter the phone password when you switch on the phone.
•
SIM lock: when enabled, your phone only works with the current SIM. You must enter the
lock code to unlock the SIM so you can use a different SIM card. Once you have entered the
lock code, you are asked to confirm your password. Reenter your password and press the
OK soft key.
Changing Your Settings
43
Note: This lock code is typically the last four digits of the current phone number or it can be
obtained from an AT&T customer service representative.
•
PIN lock: when enabled, you must enter your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN cannot use your phone without your
approval. The following options are available:
–
Off: the phone connects directly to the network when you switch it on.
–
On: you must enter the PIN each time the phone is switched on.
Note: Before disabling the PIN lock feature, you must enter your PIN. You can obtain your PIN from
your customer service representative.
•
Privacy lock: using this option you can lock All of the applications or any of the following
applications: Call log, Contacts or Messages. Press the Save soft key to save your
selections. Once you have locked the contents, you must enter the phone password to
access the associated menus.
Note: The first time you access the password screen, you are prompted to create a password.
•
Change password: allows you to change your password to a new one. You must enter the
current password before you can specify a new one. Once you have entered a new password,
you are asked to confirm it by entering it again.
•
Change PIN code: allows you to change your current PIN, provided the PIN check feature is
enabled. You must enter the current PIN before you can specify a new one.
Call
The Call menu allows you to set up these options for All calls and for Voice calls.
•
•
All calls: allows you to set up options for Show my number, Auto reject, Answering mode,
Call status tones and Alerts on call.
Voice calls: allows you to set up options for Call barring (if available), Call waiting and Auto
redial.
44
Applications
The Applications menu allows you to choose how your phone dials and receives
calls in these settings menus: Message and Contacts.
•
Message: allows you to set up options for Text messages, Broadcast messages and to
connect to your Voice mail number.
–
Text messages: allows you to set up options for Sending options and for Block number.
Voice mail number allows you to connect to the voice server and to view your voice server
number.
–
:
•
Contact: allows you to view your Favorites, to select save options for Phone or SIM and to
view your Own numbers.
–
Favorites: allows you to view your Favorites list.
–
Save new contacts to: allows you to choose how your contacts are saved: to your phone or
to your SIM or to be prompted each time.
–
Own numbers: allows you to view the number assigned to the SIM in your phone.
Note: You can change the number assigned to your SIM that displays in the Own Numbers menu,
but entering another number prevents you from making or receiving calls on the handset.
You may also add other names and numbers into your phone for easy referral.
Memory
The Memory menu allows you to clear your phone memory and to view the memory
status.
ᮣ
In Idle mode, press the Menu soft key and select Settings
➔
Memory to choose
from the menu options.
•
•
Clear phone memory: allows you to specify All, Messages or Contacts.
Memory status: allows you to view the memory status of the contacts and messages on
your Phone and the contacts and messages on your SIM.
Changing Your Settings
45
Master reset
The Master reset menu allows you to reset the only the settings you designate or to
reset all the settings.
ᮣ
In Idle mode, press the Menu soft key and select Settings
➔
Master reset to
choose from the menu options.
•
•
Reset settings: allows you to reset All or any combination of the following settings:
Profiles, Display, Time and date or Phone.
Master reset: allows you to perform a master reset of your phone when you see this
prompt: Master reset will restart phone. Reset settings? Press the OK soft key to confirm.
46
|