DUAL BAND
GSM TELEPHONE
SGH-T100
OWNER’S MANUAL
ELECTRONICS
Printed in Korea
World Wide Web
Code No.:GH68-02702A
Eng. 2002/02. Rev.1.0
GLOBAL SYSTEMS FOR
MOBILE COMMUNICATIONS
Contents(Continued)
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing Text Input Mode . . . . . . . . . . . . . . . . . . . . 43
English Mode (T9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
ABC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Number Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Symbolic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . . 67
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . . . 67
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . . . 70
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . . . 70
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . . . 72
Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . . . 73
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . . . 75
Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . . . 75
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . . . . . . . . 76
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . . . 76
Error Tone (Menu 4-7) . . . . . . . . . . . . . . . . . . . . . . . . . 77
Minute Minder (Menu 4-8) . . . . . . . . . . . . . . . . . . . . . 77
Connect Tone (Menu 4-9) . . . . . . . . . . . . . . . . . . . . . . 77
Selecting Functions and Options . . . . . . . . . . . . . 49
Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . 51
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . . . 55
Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . . . 55
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . . . 56
Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Phone Settings (Menu 5-1) . . . . . . . . . . . . . . . . . . . . . 78
Network Services (Menu 5-2) . . . . . . . . . . . . . . . . . . 84
Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . . . 94
LCD/LED Settings (Menu 5-4) . . . . . . . . . . . . . . . . . . . 97
Browser Settings (Menu 5-5) . . . . . . . . . . . . . . . . . . . 98
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . . . 58
Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . . . 59
Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . . . 61
Preset Message List (Menu 2-4) . . . . . . . . . . . . . . . . 62
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . . . 63
Picture Messages (Menu 2-7) . . . . . . . . . . . . . . . . . . 65
Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Scheduler (Menu 6-1) . . . . . . . . . . . . . . . . . . . . . . . . . 99
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Calculator (Menu 6-3) . . . . . . . . . . . . . . . . . . . . . . . . 103
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . . 105
Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . . 106
World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . . 107
Clock (Menu 6-7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
2
3
Contents(Continued)
Safety Precautions
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal. For more detailed
safety information, see “Safety Information” on page
129.
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
AirShooting(Menu 7-1) . . . . . . . . . . . . . . . . . . . . . . . 110
SpaceWar(Menu 7-2) . . . . . . . . . . . . . . . . . . . . . . . . 111
MyPet(Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Road safety comes first
WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 113
Home(Menu 8-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Bookmark(Menu 8-2) . . . . . . . . . . . . . . . . . . . . . . . . . 114
Goto(Menu 8-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Navigating with the WAP Browser . . . . . . . . . . . . . 115
Entering Text, Numbers, or Symbols . . . . . . . . . . . 117
Network Connection Information . . . . . . . . . . . . . . 118
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Additional Services . . . . . . . . . . . . . . . . . . . . . 119
Switch off in aircraft
Wireless phones can cause interference. Using them
on aircraft is both illegal and dangerous.
ALS(Alternate Line Service) . . . . . . . . . . . . . . . . . . 119
Solving Problems . . . . . . . . . . . . . . . . . . . . . . 121
Reference Information . . . . . . . . . . . . . . . . . . . 124
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Using the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Switch off in hospital
Follow any regulations or rules. Switch phone off
near medical equipment.
Respect special regulations
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Quick Reference Card. . . . . . . . . . . . . . . . . . . . 141
Follow any special regulations in force in any area
and always switch off your phone whenever it is for-
bidden to use it, or when it may cause interference or
danger (in a hospital for example).
Interference
All wireless phones may be subject to radio interfer-
ence, which may affect their performance.
4
5
S a f e t y P re c a u t io n s
Unpacking
Use qualified servicing
Only qualified service personnel must repair
equipment.
Your package contains the following items.
Use sensibly
Do not touch the antenna unnecessarily when the
phone is switched on.
Emergency calls
Ensure the phone is switched on and in service.
Enter the emergency number (112 or another official
Travel Adapter
Phone
Battery Charger
emergency number) and press
. Give your location.
Do not end the call until told to do so.
Non-Ionising Radiation
No part of the human body should come into contact
with the antenna during normal operation.
Wearable
EarMIcrophone
IMPORTANT! Only SAMSUNG-approved
accessories and batteries should be used with this
product. The use of any other power accessory will
invalidate any approval or warranty applying to the
phone, and may be dangerous.
Hand String
Batteries
CAUTION
Downloading Cable
(Only for Download Image&Ringtone)
PC Link for GSM
Ver1.0
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s
instructions.
Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Hands-free car kit
• Standard and Extended batteries
• Data kit
6
7
Yo u r P h o n e
Your Phone
Phone Layout
The following illustrations show the main elements
of your phone.
Antenna
Service light
earpiece
Display
External display
External speaker
Volume
During a call, adjusts
the earpiece volume.
In idle mode with the
phone open, the keys
adjust the key tone
volume.
Key
Functions
To reject an incoming
call, press and hold
the volume key when
the phone is closed.
Soft keys perform the functions indicated
by the text above them (in the bottom line
of the display).
In the menu facility, scroll through the
menu options and phonebook memory.
In idle mode, performs as a hot key to the
several menus respectively.
Microphone
8
9
Yo u r P h o n e
Yo u r P h o n e
Display
Key
Functions (continued...)
Display Layout
Deletes characters from the display.
The display comprises of three areas.
In idle mode, allows you quick access to
WWW services.
Makes or answers a call.
Icons
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function
or stores information that you have entered
(such as a name) in the phone or SIM
memory.
Text and
graphic area
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle
mode and cancels your input.
k
Soft key
indications
Enters numbers, letters and some special
characters.
Area
First line
Description
Displays various icons (see below).
Used for various purposes in different
functions.
When pressed and held down in idle mode,
the key toggles the alert type from the
#
current alert type to vibraton.
Middle lines Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys and
the divert icon.
10
11
Yo u r P h o n e
Yo u r P h o n e
Icons
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
Signal strength : Shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Service: Appears when a call is in
progress.
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 80 for further details.
New Message: Appears when a new
text message has been received.
New Voice Mail: Appears when a new
voice mail message has been received.
External Display
Vibrator on: Appears when the vibrate
mode is on. An incoming call will vibrate
the phone rather than ring it.
Your phone has an external display on the cover. It
also shows Signal strength, Vibrator, and Battery
Strength icon. It indicates that you have an incoming
call or message, missed calls and alerts you at the
specified time if set an alarm.
Alarm on: Appears when you set an
alarm.
When you press and hold the volume key with the
phone closed, the backlight of the external display
illuminates.
Battery strength: Shows the level of
your battery. The more bars you see, the
more power you have left.
12
13
Yo u r P h o n e
Getting Started
Installing the SIM Card and the Battery
Service Light
• Keep all miniature SIM cards out of the reach of
small children.
The service light is on the top right-hand corner of
the phone. It flashes when services are available on
the phone.
• The SIM card and its contacts can easily be
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off and then remove
the battery.
To activate or deactivate use of the service light, set
the Service Light menu option (5-1-6); see page 81
for further details.
1. If necessary, switch off the phone by holding
down
until the closing animation is
displayed.
Service light
2. Pull/push and hold the catch above the battery on
the back of the phone. Lift the battery away.
14
15
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
3. Insert and slide the SIM card under the two tabs,
ensuring that the cut corner is top left and the
gold contacts of the card face into the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local SAMSUNG dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
120 minutes for a Standard battery, 150
minutes for a Extended battery.
Using a Travel Adapter
The phone can be used while the battery is charging.
4. Place the battery back on the phone. First insert
the teeth on the bottom of the battery into the
corresponding slots, then push the battery against
the back of the phone until it clicks into place.
Make sure the battery is properly installed before
switching on the power.
1. Connect the lead from the travel adapter to the
bottom of the phone. Check that the arrow on
the lead connector is facing towards the front of
the phone.
16
17
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Low Battery Indicator
2. Connect the adapter to a standard AC wall outlet.
When the battery is weak and only a few minutes of
talk time remain, the battery sensor will let you know
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
by blinking an empty battery icon(
), you will
hear a warning tone and a message will be repeated
at regular intervals on the display. When the battery
becomes too weak for the phone to operate, it
switches off automatically.
3. When finished charging, disconnect the adapter
from the power outlet.
Disconnect the adapter from the phone by
pressing the grey tabs on either side of the
connector and pulling the connector out.
18
19
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Switching the Phone On/ Off
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (5-1-3); for
further details, refer to page 79.
1. Open the phone.
2. Hold down
for more than one second to
switch the phone on.
5. When you wish to switch the phone off, hold down
for more than two seconds.
3. If the phone asks for a password, key in the
password and press the OK soft key. The
password is factory set to 0000. For further
details, see page 124.
Using the Earmicrophone
When you connect the earmicrophone to the jack on
the top of the phone, the button on the
earmicrophone will operate as below without
opening the phone or pressing a key on the phone.
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 125.
When the phone has registered with an approved
network provider, the idle screen, illustrated
below, is displayed on the main display and the
external display respectively.
Redialling a last call: Press the button twice in idle
mode.
Answering a call: press the button when a call
comes in.
Ending a call: press the button during a call.
Note: You can use the voice dialling or voice
command by pressing the button, when the
Active Folder menu option (5-1-10) is set Voice
Dial or Voice Command. For further details,
refer to page 82.
<Se rvice Provide r>
Fe b 0 3 Sat urday
1 2 : 5 7
Sat 0 2 / 0 3
1 2 : 5 7
<External display>
Me nu
Pho ne Bo o k
<Main display>
20
21
Ca ll Fu n c t io n s
Call Functions
Making a Call
Ending a Call
When the idle screen is displayed, key in the area
code and phone number and press
When you have finished your call, briefly press
.
.
Note: If you have set the Auto Redial option (5-1-7) to
ON(see page 81) and the person called does not
answer or the line is busy, the number is
Making a Call using the Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone memory, called
the phonebook. You then simply select the required
name to recall the associated number. For further
details on the Phonebook feature, refer to page 35.
redialled automatically up to ten times.
International Calls
1. Press and hold down
for the international
prefix. The + character appears.
Voice Dialling
2. Key in the country code, area code and phone
number and press
.
If you have set the Active Folder option (5-1-10) to
Voice Dial (see page 82), your phone also allows
you to say a name when you open the phone. It then
automatically dials the number stored with that
name. For further details on the Voice Dialling
feature, refer to page 67.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the
soft key.
Last Number Redial
Any other digit
in the number
Press
or
key until
the cursor ( x) is immediately
to the right of the digit to be
cleared.
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
Press the
soft key.
1. If there are any characters on the display, press
to return to idle mode.
The whole display Hold down the
soft key for
more than one second.
22
23
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Answering a Call
2. Press
numbers.
to access the list of last-dialled
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed.
3. Use
or
to scroll through the Redial list
until the required number is displayed.
4. Press to dial the number displayed.
1. To answer a call, open the phone. If the phone is
already open, press
or the Accept soft key.
If the Any-key Answer menu option (5-1-4) is set
to ON, you can press any key to answer a call
Adjusting the Volume
except for
80).
and the Reject soft key (see page
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Note: To reject an incoming call, press the Reject
soft key or . When the phone is closed,
press and hold the volume key on the left
side of the phone .
2. End the call by closing the phone or pressing
.
Note: You can answer a call while using the
phonebook or menu features.
In idle mode with the phone open, you can adjust the
key tone volume using the same keys.
24
25
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Viewing Missed Calls
Editing a Missed Call Number
1. Press the Options soft key.
2. Press the Select soft key.
If you are unable to answer a call for any reason, you
can find out who was calling you, if this service is
available. In this way, you can call the person back,
if necessary.
3. Change the number as required. Press
to move back through the number.
or
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
4. To...
Call the number
Then press the...
To view the missed call immediately, proceed as
follows.
key.
Store the number
Save soft key and enter
the name and location
required (for further
1. If the phone is closed, open the phone.
2. Press the View soft key.
details, refer to page 35).
The number corresponding to the most recent
missed call is displayed, if available.
Deleting a Missed Call
3. To...
Scroll through the
Then press the...
key.
1. Press the Options soft key.
2. Press or to highlight the Delete option.
3. Press the Select soft key.
or
missed calls
Call the number displayed
key.
You can press
Call feature.
at any time to exit the Missed
Edit or delete a missed
call number
Options soft key
(see the following
paragraphs).
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 55.
26
27
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
In-Call Options
Searching for a Number in the Phonebook
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
Switching the Microphone Off (Mute)
2. Press
option.
or
to highlight the Phonebook
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
3. Press the OK soft key.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
4. Enter the start of the name that you want to find
and press the Find soft key.
To switch the microphone off temporarily,
proceed as follows.
Note:You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
1. Press the Options soft key.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
2. Press
or
to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
5. To review the highlighted entry, press the View
soft key.
To switch the microphone back on, proceed as
follows.
For a more detailed description of the Phonebook
feature, refer to page 35.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (5-2-3) to Active (see page 89). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
To make a call while you have a call in
progress, proceed as follows.
2. If you want to switch between the two calls,
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
press the Swap soft key.
If you want to end a held call, press the Options
soft key and select the End held option.
2. Press
to dial the second call.
The first call is automatically put on hold.
3. To end the current call, press
.
Or alternatively, proceed as follows.
Any held calls will automatically be reconnected
to you.
1. Put the current call on hold by pressing the
Options soft key, followed by the Hold option.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Making a Multiparty Call
2. Highlight the required person, by pressing
or
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
, followed by
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
Setting up the Multiparty Call
4. To return to the multiparty call, press the Options
1. Call the first participant in the normal way.
soft key and select Join.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
2. Highlight the required person, by pressing
or
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
, followed by
.
3. Select Remove.
The call is ended with that participant, but you
can continue to talk with the other participants.
Having a Private Conversation With One
Participant
4. End the multiparty call by closing the phone or
pressing
.
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
32
33
Ca ll Fu n c t io n s
Phonebook
Muting/ Sending Key Tones
You can store phone numbers and their associated
names in the memory of your SIM card. In addition,
you can store up to 500 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they
were a single entity, called the Phonebook.
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
flashes in the display.
)
1. Key in the number to be stored.
2. When you are sure that it is correct, press the
After you have finished your call, you can read the
message; refer to page 59 for further details.
Save soft key.
Notes:
• If you make a mistake while entering a number,
correct it using the
soft key. For further
details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
3. Enter the associated name (the maximum length
depends on your SIM card). For information on
how to enter a name, see page 42.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
34
35
P h o n e b o o k
P h o n e b o o k
5. Press the right soft key to toggle between the phone
Voice Record
(To Phone) and card (To Card) memories.
Note: This option appears only when no name has
6. If you do not want to save the number and name in
been recorded.
the suggested location, press
to clear the
Allows you to add a voice tag to the number.
location number and enter your preferred location by
pressing the number keys.
Follow the instructions given by your phone to record
the required name.
7. Press OK to store the name and number.
8. You can access the phonebook options by pressing
Play Voice
the Options soft key, or scroll through the memory
with
or
.
Note: This option appears only when you have
already recorded some names.
To exit, press
.
Plays back the names that you have recorded.
Phonebook Options
Voice Delete
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you to
access the phonebook options, described in the
following paragraphs.
Note:This option appears only when you have
already recorded some names.
Allows you to delete a specific voice entry.
You are asked to confirm the deletion by pressing the
OK soft key.
Accessing the Options
Paste
To access the various phonebook options, proceed as
follows.
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
1. Press the Options soft key.
The first available option is highlighted.
Use the soft key to change the number as
required (refer to page 22 for further details). When
2. Press the Select soft key to select the highlighted
option. Or, press
one or more
you are ready to dial, press
.
or
key
times until the required option is highlighted to
highlight a differnt option.
36
37
P h o n e Bo o k
Phone book
Speed-Dialling by SIM Memory Location
Edit
Allows you to edit a number and name stored in the
phonebook.
Once you have stored phone numbers in the SIM
card, you can dial them easily whenever required.
Erase
To speed-dial a number, proceed as follows.
Allows you to erase a number and name stored in
the phonebook. You are asked to confirm that you
wish to erase the name and number from the
phonebook by pressing the Yes soft key.
To speed-dial a
number in locations...
Then...
2 to 9
Press and hold down the
appropriate key.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it into another location on the SIM card or
in the phone memory.
10 and above
Press the appropriate keys,
followed by the # key.
When the display shows
the name, phone number
and location, press the
Dial soft key.
Memory Status
Note: Memory location 1 is reserved for your Voice
You can check how many names and phone numbers
are stored and how many locations are still free in
the card memory and phone memory.
Mail server number.
Alert
Allows you to set a ringing tone on a number stored
by the phone. You can select the required ringing
tone from several tones. When this number calls you,
the phone rings with this ringing tone.
38
39
P h o n e b o o k
P h o n e b o o k
Searching for and Dialling a Number in
the Phonebook
Dialling a Number using the Service
Directory or Information Numbers
1. When the idle screen is displayed, press the
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
PhoneBook soft key.
2. If your SIM card provides with Service Dialling
Number (SDN) and Information Numbers services,
you should select the Find option.
When the idle screen is displayed, press the
PhoneBook soft key, then you can select one of the
services.
3. Enter the start of the name that you want to find
and press the Find soft key.
Service Dir.: enables you to view the Service
Directory and make calls from it.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
4. To...
View the
Then press the...
View soft key.
highlighted entry
Select a
or
key one or
different entry
more times until the
required entry is
highlighted.
Look for a name
starting with a
different letter
Key labelled with the
required letter.
5. Once you have found the required entry, press
to dial the number.
40
41
En t e rin g Te xt
Entering Text
Changing Text Input Mode
When storing a name in the phonebook, creating your
personal greeting or scheduling events in your
calendar, you will need to enter text.
When you are in a field that allows character entry,
you should notice the text input mode indicator in the
bottom of the display.
You are provided with the following text input modes.
To change to another text input mode:
English mode (T9)
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
1. Press the right soft key, indicating the text input
mode.
than one letter – when you press the
key once, J,
2. Scroll to the desired mode with
or
.
K or L may be displayed. The English mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
Note:If you want to exit the menu without changing
to a new mode, press the right soft key.
3. Press the Select soft key to select the displayed
mode.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice,
three or four times until the letter is displayed.
4. You will find the selected text input mode
indicated in the bottom of the display.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered Trademark of Tegic Communications, Inc. and
is licensed under U.S. Patent 5,818,437/ 5,953,541/ 6,011,554.
42
43
En t e rin g Te xt
En t e rin g Te xt
English Mode (T9)
Smart Punctuations
To type a word, press keys corresponding to the
letters you need. Remember the following as you are
typing:
Period, hyphen, and apostrophe are available on
English mode applies rules of grammar to insert the
.
correct punctuation. Notice that
in this
is used twice
1. Press keys on the phone just once per desired
example to display two punctuation marks:
letter. For example, to enter ‘hello’, press
,
,
,
.
,
l
e
t
‘
s
e
a
t
.
2. The word you are typing appears in the display. It
may change with each key press.
Changing Case
3. Type to the end of the word before editing or
deleting any keystrokes.
To shift the case of the next letter(s) that you type,
press . There are three shift states: Lower
4. Complete each word with a space by pressing
.
Case, Initial Capital and Capitals Lock.
Scrolling
If the word that appears in the display is not the
word that you desire, press
one or more times
• To move the cursor left or right through your text
to display alternate word choices for the keys you
have typed. (For example, ‘of’ and ‘me’ both shares
message, press
• To scroll through alternate word choices for the
or
.
the sequence
,
. The phone displays the
keys you have entered, press
.
most commonly used choice first.)
Clearing Letters and Words
To type words not found in the English mode, change
the text input mode to ABC mode.
Press
one or more times to clear letters to the
left. Press and hold down the key to erase a word.
45
44
En t e rin g Te xt
En t e rin g Te xt
ABC Mode
The cursor moves to the right when you press a
different key. When entering the same letter twice (or
a different letter on the same key), just wait for a few
seconds for the cursor to move right automatically,
and enter the next letter.
When typing in ABC mode, you should press the key
labelled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on.
For example, you press
display the letter “C” ,
display the letter “K”. So, this method is called
Multi-tap typing.
three times quickly to
two times quickly to
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower Case,
Initial Capital and Capitals Lock.
Refer to the table below for the list of characters
assigned on each key.
Inserting a Space
Press
to insert a space between the words.
Key
Characters in the Order Displayed
Scrolling
Upper Case
Lower Case
To move the cursor left or right through your text
:
;
¿ ¡ 1 = “ /
.
,
? ! 1 -
‘
@ :
1
2
3
4
5
6
7
8
9
0
message, press
or
.
A B C 2 Ä Æ Å G
D E F 3 É D
G H I 4 Q
a b c 2 à ä æ å Ç
d e f 3 é è
Clearing Letters and Words
g h i 4 ì
J K L 5 L
j
k l
5
Press
one or more times to clear letters to the
M N O 6 Ñ Ö Ø X
P Q R S 7 P S
T U V 8 Ü F
W X Y Z 9 YW
0 x < > % # £
m n o 6 ñ ò ö ø
p q r s 7 ß
left. Press and hold down the key to erase a words.
t
u v 8 ù ü
w x y z 9
0 + ( & _ $
)
46
47
En t e rin g Te xt
Selecting Functions
and Options
Number Mode
Number mode enables you to enter numbers into a
text message. Press keys corresponding to the
desired digits, and manually switch back to the text
entry mode of choice.
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys (
and
). Each menu and sub-
menu allows you to view and alter the settings of a
particular function.
Symbolic Mode
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Symbolic mode enables you enter symbols into a
text message.
Press
or
to display more symbol sets.
Example:
Press keys corresponding to the desired mark, then
the phone automatically switches back to the text
entry mode used just prior to selecting Symbol mode.
<ServiceProvider>
Feb 03 Saturday
10:40
neB
Press the left soft key
to access the Menu
functions.
Press the right soft
key to access the
Phonebook feature.
48
49
S e le c t in g Fu n c t io n s a n d Op t io n s
Using the Menu
The phone offers a range of functions that allows
you to tailor the phone to your needs. These
functions are arranged in menus and submenus.
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
The menus and submenus can be accessed by
scrolling.
2. To...
Select the:
Then press the...
1. In idle mode, press the Menu soft key to access
Left soft key.
the menu facility. Scroll with
or
.
• Function displayed
or
• Option highlighted
2. If the menu contains any submenus: for example,
Ring Tone, find the one you want by scrolling
or
. Press the Select soft key to
with
View the next function
or highlight the next
option in a list
key.
key.
enter the submenu.
If the menu you have selected contains submenus,
repeat this step.
Move back to the
previous function
or option in a list
3. Scroll with
or
to find the setting of your
choice. Press the Select soft key to confirm the
chosen setting.
Move back up one
level in the structure
Right soft key.
key.
Notes:
• You can return to the previous menu level by
pressing the soft key.
• You can exit the menu without changing the menu
settings by pressing
Exit the structure
without changing
the settings
.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
50
51
Us in g t h e Me n u
Us in g t h e Me n u
Menu Structure
Main menu
level 1
level 2
3. Voice Functions
1. Voice Dial
1. Record
2. Act
Menus let you check or change your phone settings. The
following shows the menu structure.
3. Delete One
4. Play All
5. Delete All
1. Record
2. Act
3. Play All
4. Delete All
1. Record
2. Replay
3. Delete One
4. Delete All
Note: You can only see menu 0, if your SIM card
supports the SIM Application Toolkit. This is a
network feature. Please contact your service
provider for more information.
2. Voice Command
3. Voice Memo
The numbers assigned to each menu function may
not match the menu number on the phone. It
depends on the services supported by the SIM.
4. Tones
1. Ring Tone
2. Melody Composer
3. Ring Volume
4. Alert Type
5. Keypad Tone
6. Message Tone
7. Error Tone
Main menu
level 1
level 2
1. Call Records
1. Missed Calls
2. Received Calls
3. Dialled Calls
4. Call Time
1. Last Call Time
2. Total Sent
8. Minute Minder
9. Connect Tone
3. Total Received
4. Reset Timers
1. Last Call Cost
2. Total Cost
1
5. Call Cost
5. Settings
1. Phone Settings
1. Greeting Message
2. Own Number
1
3. Max Cost
3. Language
4. Reset Counters
5. Set Max Cost
6. Price/Unit
4. Any-key Answer
5. Backlight
6. Service Light
7. Auto Redial
8. Auto Answer
9. Caller ID
2. Messages
1. Voice Mail
1. Connect to Voice Mail
2. Voice Server Number
2. Read Messages
3. Write Messages
4. Preset Message List
5. Setup
10. Active Folder
11. Reset Settings
12. Active Line
1
1. Service Centre
2. Default Type
3. Default Validity
4. Reply Path
5. Delivery Report
1. Read
6. Broadcast
2. Receive
3. Channel List
4. Language
7. Picture Messages
52
53
Us in g t h e Me n u
Main menu
level 1
level 2
2
5. Settings
2. Network Services
1. Call Diverting
2. Call Barring
2
2
3. Call Waiting
4. Network Selection
2
5. Line Identification
6. Closed User Group
1. PIN Check
3. Security Settings
2. Change PIN
3. Phone Lock
4. Change Password
5. SIM Lock
1
6. FDN Mode
1
7. Change PIN2
4. LCD/LED Settings
5. Browser Settings
1. Select Image
2. LCD Contrast
3. Menu Colour
4. Service Colour
1. Proxy Settings
2. Current Proxy
2
6. Organizer
1. Scheduler
2. Alarm
1. Daily Alarm
2. Once Alarm
3. Weekly Alarm
4. Alarm Tone
3. Calculator
4. To Do List
5.Calendar
6. World Time
7. Clock
1. Set Time
2. Set Date
3. Format
7. Games
1. AirShooting
2. SpaceWar
3. MyPet
2
8. WWW Services
1. Home
2. Bookmark
3. Goto
1
Shown only if supported by your SIM card.
2
May not be shown or supported by your network service provider.
54
Call Records
Via this menu, you can view the phone calls:
• Missed
• Received
• Dialled
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
Lets you view the last 10 unanswered calls. You can
also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
Received Calls
Menu 1-2
Lets you view the last 10 phone calls received. You
can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
55
Ca ll Re c o rd s
Ca ll Re c o rd s
Dialled Calls
Menu 1-3
Call Cost
Menu 1-5
Lets you view the last 10 numbers dialled.
You can also:
This network feature lets you view the cost of calls.
The following options are available.
• Edit the number and save it in the phonebook
• Redial the number
Last Call Cost: cost of the last call made.
• Delete the number from the list
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls until you
reset the counter(does not affect calls to the
emergency services).
Call Time
Menu 1-4
Lets you view the timers for calls made and received.
The following timers are available.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Last Call Time: length of the last call.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see page
125) and then press the OK soft key.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.
You can use the Reset Timers option to reset the
call timers; you must first enter the phone password
(see page 124) and then press the OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and so forth.
56
57
Me s s a g e s
Messages
Note: If you press and hold
when the phone is in
Your phone receives voice mail notification messages,
and text messages. Voice mail and short message service
(SMS) are network service. Please contact your service
provider for more information.
idle mode, you can access your voice mail server
directly (Provided you have already programmed
it into the voice mail menu location.)
When the
mail.When the
icon appears, you have received voice
icon appears, you have received
Voice Server Number
You can change the voice mail server number.
new messages. If the message memory is full, an error
message is displayed and you cannot receive any new
messages. Use the Delete option in the Read
Messages menu (2-2) to delete obsolete messages.
Once there is space in the memory any undelivered SMS
messages will be received (provided sufficient space is
available).
To...
Then press the...
Enter the server
number
Corresponding number
keys.
Recall a number in
the phonebook
PhoneBook soft key.
Correct a digit
soft key.
Picture and ringing tone messages can also be received.
Move the cursor
without clearing the digit
or
key.
To...
Then use the...
Send or receive
Picture Messages menu
picture messages
option (2-7); see page 65.
Note: See page 35 for instructions on how to use the
Load ringing
tone messages
Ring Tone menu option (4-1);
see page 72.
phonebook.
Voice Mail
Menu 2-1
Read Messages
Menu 2-2
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
When the Read Messages menu is selected, the
header of the first message is displayed. This contains:
• Message number
Connect to Voice Mail
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page). You can then select this option and
simply press the OK soft key to listen to your messages.
• Message status (New, Old, Not sent, Sent)
58
59
Me s s a g e s
Me s s a g e s
Write Messages
Menu 2-3
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
Via this menu, you can write and edit text messages
of up to 160 characters.
1. Key in a message. For details on how to enter
text, refer to page 42.
• Message text
To scroll through the messages, press
You can choose the following options, by pressing
the Options soft key.
or
.
2. After you complete the message, you can select
the following options.
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Text Reply: allows you to reply by sending a text
message. You can also:
• Change the SMS centre number (if required)
• Send the message
• Save and send the message
• Save but not send the message
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Call back: allows you to call the sender back.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
3. After selecting the required option, press the
Select soft key.
Send: allows you to send a message that you have
not already sent.
The display prompts you to enter the destination
number.
Send again: allows you to resend a message that
you have already sent.
4. Enter the phone number and press the OK soft
key. Or,
Note: The options available vary, depending on the
message status (New/Old, Not sent, Sent).
Press the PhoneBook soft key to select the
number from the phone book.
60
61
Me s s a g e s
Me s s a g e s
Preset Message List
Menu 2-4
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the message into the selected
format.
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
or
. When the required message number
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to the recipient.
appears, press the Options soft key.
The following options are available.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter text in
your message, refer to page 42.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Delete: allows you to delete the selected preset
message.
Broadcast
Menu 2-6
Setup
Menu 2-5
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
Via this menu, you can set up default information on
the SMS feature.
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the
channel list
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
62
63
Me s s a g e s
Me s s a g e s
Picture Messages
Menu 2-7
If the message is long, press the down volume key
on the left side of the phone one or more times.
The phone allows you to send and receive text
messages that contain pictures. These messages are
called ‘Picture Messages’, several of which are preset
in the phone and can be replaced with new ones
received from other sources.
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The following options are available.
The following options are available.
Read: lets you view the first message. Scroll through
Write Message: allows you to write text to send
with the picture message.
the message using
or
. At the end of the
message, press the Next soft key to move to the
Delete: deletes the picture message; Empty is
next message.
displayed instead of the title.
Receive: allows you to Enable or Disable the
reception of broadcast messages.
Send Message: allows you to enter the destination
phone number; you must then press the OK soft key
to send the picture message.
Channel List: lists all available channels. The
channels currently selected are indicated by an
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
asterisk ( ) beside the name. When you select one of
*
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Receiving a Picture Message
To view a message immediately you receive it, press
the View soft key. Press the right soft key to toggle
between viewing the message and the image.
Language: allows you to select your preferred
language for the cell broadcast message display.
64
65
Me s s a g e s
The following options are available.
Save: allows you to save the picture message to your
picture message list.
Discard: allows you to discard the picture message
without saving it.
Cut Number: allows you to extract a number from the
picture message, so that you can call the number or
save it in the phonebook.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging services.
Each picture message is made up of several text
messages;therefore, sending one picture
message may cost more than one text message.
Picture messages are stored in the phone, you
cannot view them if you use your SIM in another
phone.
* Nokia is a registered trademark of Nokia Corporation.
66
Voice Functions
You can use the Voice feature to customize various
settings, such as the:
• Voice Dial
• Voice Command
• Voice Memo
Voice Dial
Menu 3-1
The voice dialling feature allows you to make phone
calls by saying a voice tag that has been added to a
desired name and phone number. Any spoken word, for
example a name, can be a voice tag.
Before using voice dialling, note that:
• Voice tags are not language dependent. They are
dependent on the speaker’s voice.
• The voice tags are sensitive to background noise.
Where possible, record voice tags or make calls in a
quiet environment.
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear.
• The maximum length for a voice tag recording is
about 1.5 seconds, but very short names are not
recorded
• You can store up to twenty voice tags in the
phone’s memory.
67
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
Voice Dial Record
Voice Dial Delete One
Allows you to record name tags and allocate them to
numbers for voice dialling.
Allows you to delete an individual voice tag. The
corresponding phone number remains in the
phonebook but the voice tag is deleted.
Say the name you want to use for voice dialling after
you hear a voice prompt. For best results, use names
with at least two syllables, or use both a first and
last name. The phone stores the name as a “first”
sample, and then prompts you to say the name
again.
If the name displayed is... Then press the...
To be deleted
OK soft key.
Not to be deleted
or
key.
The next name is
displayed.
Respond to the prompt by repeating the name. The
phone stores the name as a second sample and then
requests the phone number.
To exit the Voice Dial Delete One option, press the
soft key.
To store the number, press the OK soft key. Follow
the instructions described on page 35 to complete
storing the number into your internal phonebook.
Voice Dial Play All
Allows you to play back all recorded voice tags.
Voice Dial Act
Voice Dial Delete All
This option activates voice dialling.
Allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. Press
the OK soft key when the message ‘Delete All
confirm?’ is displayed.
You hear a voice prompt and Say Name is
displayed. Say the voice tag clearly. If no match for
the voice tag is found or recognized, the phone may
ask you to try again. The phone automatically dials
the number of a recognized voice tag.
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
Note: This option is only available once you have
recorded and stored voice tags.
68
69
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
Voice Command
Menu 3-2
Voice Memo Record: Allows you to record a
memo. The screen displays the:
• Memo location
This menu allows you quick access to menus you use
frequently, using your own voice commands.
• Date and time when the memo was recorded
• Recording time counter
You can select the following functions:
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
Voice Command Record: The 20 most frequently
used menu functions are programmable with your
own voice commands. The menus are preset to OFF
at the factory, indicating that they are not recorded.
When voice commands are recorded successfully, the
menus are changed to ON in the display.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
Voice Command Act: Use this menu to access the
menu of the recorded voice commands.
an old memo before recording a new one.
Voice Memo Replay: Allows you to play back all
memos recorded, starting with the most recent
memo. The screen displays the:
Voice Command Play All: Plays all voice
commands you have recorded.
• Memo location
• Date and time when the memo was recorded.
Voice Command Delete All : Deletes all
commands you have recorded.
To skip to the next memo, press the Skip soft key, to
stop the playback, press the Stop soft key.
Voice Memo
Menu 3-3
Voice Memo Delete One: Allows you to delete a
specific memo. All memos recorded are played back,
starting with the most recent one.
You can use the Voice Memo feature to :
• Record up to 3 voice memos
• Play the recorded voice memos
• Delete one or all voice memos
Voice Memo Delete All: Allows you to delete all
memos. Press the OK soft key to confirm.
70
71
To n e s
Tones
You can use the Tones menu to customise various sound
settings, such as the:
• Ringing tone, volume and type
• Composing your own melody
• Sounds made when you press a key, make an error or
receive a message
Melody Composer
Menu 4-2
This menu allows you to compose your own,
customised ringing tone.
• Three octaves are available.
• A maximum of 100 notes can be entered.
• Adjustable length of note and note rest.
To Compose Melody
Ring Tone
Menu 4-1
You can compose two melodies. When you access
the menu, the melody name appears, if already
created. Otherwise, Empty appears. Select Empty
to create a new melody or select the melody’s name
that you want to edit.
This option allows you to select the phones ringing tone.
You can choose between many different tones and each
time you select a tone it is played for a few seconds. 3
download ring tones from ringing tone message, 2 user
ring tones using the Melody Composer, and 12 changable
ringtones downloading from the CD in this package are
also available.
Use the following keys to compose a melody:
: to enter C, the first note in the musical scale
(doh).
When you receive a ringing tone message, proceed as
follows.
: to enter D (re).
: to enter E (mi).
: to enter F (fa).
: to enter G (soh).
: to enter A (la).
: to enter B (ti).
1. To listen to the tone, press the Play soft key.
2. To save the ring tone, press the Save soft key.
3. Select the ringing tone location you wish to save it and
press the OK soft key.
4. To use this tone as the current ringing tone, press the
Yes soft key. Otherwise press the No soft key.
: to raise an octave higher or drop an octave
lower.
If your SIM card supports ALS, this option also allows you
to select a different ring tone for each line. If you set a
different ring tone for each line, you can distinguish
between incoming calls.
: Not available
: to enter a note rest. Press
find the desired length of rest.
until you
: to raise one semitone above the tone
written. Example:If you want to enter a F
Note: While downloading, if the battery is detached from
the phone, you can lose the downloaded ringtones.
sharp, press F (fa) then press
.
72
73
To n e s
To n e s
Ring Volume
Menu 4-3
: to delete notes.
: to move a note to the next semitone
higher position or lower position in the
musical scale. For example, the note A
moves A#, B, C, C# in the scale each time
Allows you to adjust the ringing volume to one of
five levels. Use the volume keys on the left side of
the phone or the
or
keys. The greater the
you press
: to adjust a length of a note. Enter a note,
then press . Notice that the note length
.
number of bars, the greater the volume level.
changes each time you press the key.
Alert Type
Menu 4-4
You can listen to your melody by pressing the Listen
soft key. If you are satisfied, press the Yes soft key,
and enter the melody name. For information on how
to enter a name, refer to page 42.
Allows you to indicate how you are to be informed of
any incoming calls. The following options are
available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Note: If you want to cancel your composing, press
. The display goes back to the previous
menu level, the screen displays Empty.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
After you save the melody, the display asks you if
you want to set the melody as the ring tone. If you
select Yes, your phone plays the melody each time
your phone rings. If you select No, the melody is just
saved and the phone returns to the idle mode.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
Note:Pressing and holding down
toggles
between the current alert type and Vibration.
To Delete a Selected Melody
1. Select the melody you want to delete.
2. Press and hold
will be erased.
for a few seconds. All notes
3. Press the Listen soft key. The display asks you if
you are sure you want to erase the melody. Select
the Yes soft key.
74
75
To n e s
To n e s
Error Tone
Menu 4-7
Keypad Tone
Menu 4-5
Allows you to select how the phone informs you that
you have made a mistake. The following options are
available.
Allows you to select the tone that the keypad
generates when you press a key. The following
options are available.
OFF: the phone does not beep.
OFF: the keys do not make any sound.
ON: the phone beeps to indicate an invalid entry.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Minute Minder
Menu 4-8
Allows you to specify whether the phone must beep
every minute during an outgoing call to keep you
informed of the length of your call. The following
options are available.
Message Tone
Menu 4-6
Allows you to select how the phone informs you that
a new message has been received. The following
options are available.
OFF: the phone does not beep.
ON: the phone beeps every minute.
Single Beep: the phone beeps once.
SMS Tone 1 ~ SMS Tone 5: the phone sounds the
selected SMS tone.
Connect Tone
Menu 4-9
Allows you to specify whether the phone should
beep when the phone connects to the network. The
following options are available.
Light Only: the service light on the top of the phone
flashes.
Vibration: the phone vibrates but does not ring.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
76
77
S e t t in g s
Settings
Own Number
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Note: The contents of this menu may be different
depending on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternative Line
Phone Settings
Menu 5-1
Service, you can select a line with
or
.
The following options are available:
Greeting Message
Allows you to set a greeting message to be displayed
briefly when the phone is switched on. The current
message is displayed.
Add: allows you to add name and number.
Erase: allows you to erase name and number.
Edit: allows you to edit name and number. If your
SIM card supports ALS only the Edit soft key
displays. Press the Edit soft key and you can
setup or edit your own name for the ALS line.
To...
Then press the...
Clear the existing message
key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
Language
You can set a different setting for the text language
and voice language.
For more information on entering characters, refer to
page 42.
You can also set the default text input mode. For
details on the text input mode, refer to page 42.
To go back to the previous menu level without saving
your input, press
78
79
S e t t in g s
S e t t in g s
Any-key Answer
Service Light
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
Allows you to select whether or not the service light
on the top of the phone is used. The following
options are available.
any key except
To reject the call, press
and the Reject soft key.
or the Reject soft
ON: the service light flashes when the phone is
ready for use.
key.When the phone is closed, press the volume key
on the left side of the phone to reject an incoming
call. ( If the Any-key Answer menu option (5-1-4) is
set to ON, just press, if it’s set to OFF press and hold
down the button.)
OFF: the service light is not used.
ON: you can press any key except
and Reject.
Auto Redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
OFF: you can only press
or Accept keys.
Note: The interval between two call attempts varies.
Backlight
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Auto Answer
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
OFF: the backlight is not used.
Note: This feature is only available when the phone
is connected to a car kit (optional).
80
81
S e t t in g s
S e t t in g s
Caller ID
Reset Settings
You can prevent your phone number from being
displayed on the phone of the person being called.
You can easily reset your phone to its default
configuration. Before proceeding, you must enter the
phones 4-digit password.
Note: Some networks do not allow the user to
change this setting.
Note: The password is preset to 0000. To change this
password, refer to page 95.
The following options are available.
Default: the default setting provided by the network
is used.
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
Hide Number: your number is not displayed on the
other person’s phone.
Send Number: your number is sent each time you
make a call.
This menu allows you to select the desired line for
making calls. However, calls on both lines can be
answered regardless of the selected line. When you
select a line, the line number appears as an indicator
after the operator/service provider’s names.
Active Folder
The voice dial and voice command mode can be
activated automatically whenever the phone is
opened.
When you select the Manual option, you can choose
a line whenever you are in call barring, diverting,
waiting function, and there is no indicator to show
the active line.
The following options are available.
OFF: the voice dial mode must be activated manually
via the Voice Dial menu; for further information, refer
to page 67.
Voice Dial: the voice dial mode is activated when
you open the phone.
Voice Command: the voice command mode is
activated when you open the phone.
Note: When you use the earmicrophone and the
Voice Dial or Voice Comand is set, you can
use this function by pressing the button on the
earmicrophone.
82
83
S e t t in g s
S e t t in g s
Network Services
Menu 5-2
You can specify individual diverting options for each of
the following call types:
• Voice calls only
• Fax calls only ; not available when a Line 2 is in use
• Data calls only ; not available when a Line 2 is in
use.
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Example: You can:
Call Diverting
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if you
are already using the phone
Note: The call divert options that are not supported
by your network operator may not be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
To set your call diverting options, proceed as follows.
1. Select the type of calls diverting required by
pressing
or
until the appropriate option is
Call diverting can be set up in the following ways.
highlighted, and then press the Select soft key.
Divert Always: all calls are diverted.
2. Select the type of calls to be diverted by pressing
or
until the appropriate option is
Busy: calls are diverted if your phone is engaged on
another call.
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
No Reply: calls are diverted if you do not answer
the phone.
4. You can enter the number of your choice.
To enter the international code, press and hold
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Options soft key, followed
by PhoneBook or Voice Server Number.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
Note: These options may be different depending on
the SIM card.
When you are satisfied, press the Send or OK soft
key; the phone sends your setting to the network
and the network’s acknowledgement is displayed.
84
85
S e t t in g s
S e t t in g s
Call Barring
To deactivate specific call diverting settings, proceed
as follows.
The call barring network service allows you to
restrict your calls.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
To set your call barring options, proceed as follows.
1. Select the type of calls barring required by
pressing
or
until the appropriate option
is highlighted and then press the Select soft key.
2. Select the type of calls to be barred by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your
settings.
86
87
S e t t in g s
S e t t in g s
Call Waiting
4. Enter your call barring password supplied by your
service provider.
This network service enables you to be informed
when someone is trying to reach you during another
call.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
To deactivate specific call barring settings, proceed
as follows.
option is to be applied by pressing
or
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
until the appropriate option is highlighted and
then press the Select soft key.
2. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
You can also deactivate all call barring settings by
selecting the Cancel All option.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
Change Barring Password: you can set and
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Once you have entered a new password, you are
asked to confirm it by entering it again.
88
89
S e t t in g s
S e t t in g s
Network Selection
Line Identification
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
This menu option lets you view the following line
identification settings.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
1. When Network Select is displayed, press the
Select soft key.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
90
91
S e t t in g s
S e t t in g s
Closed User Group (CUG)
Deactivate: deactivates the CUG function.
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
To...
Then press the...
or key.
Scroll through the
existing CUG indexes
Activating a Closed User Group
Add a new CUG index Options soft key, select
Add and enter the index.
If you select the Closed User Group menu, you are
asked if you want to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Delete a CUG index
or
key to select the
index you want to delete,
press the Options soft key
and select Delete.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
92
93
S e t t in g s
S e t t in g s
Security Settings
Menu 5-3
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 125).
Phone Lock
PIN Check
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 4-digit phone
password each time the phone is switched on.
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Any person who does not have your PIN cannot,
therefore, use your phone without your approval.
The password is factory set to 0000. To change the
phone password, refer to menu option 5-3-4.
Once the correct password has been entered, you
can use the phone until you switch it off.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available.
To change your PIN, refer to menu option 5-3-2
opposite.
Enable: you are required to enter the phone
password when you switch the phone on.
The following options are available.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you must enter the PIN each time the phone
is switched on.
Change Password
Disable: the phone connects directly to the network
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
when you switch it on.
The password is factory set to 0000. Once you have
entered a new password, you are asked to confirm it
by entering it again.
94
95
S e t t in g s
S e t t in g s
LCD/ LED Settings
Menu 5-4
SIM Lock
Select Image
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter the
SIM lock code.
This option allows you to select the image to be displayed.
Image 1~5: shows you the predefined image.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
Calendar: shows you the calendar. When you see the
Calendar in idle mode you can scroll monthly by pressing
To unlock the SIM, you must enter the SIM lock code.
or
key.
FDN Mode
User Image: shows the downloaded image from the CD in
this package. You can set the text colour, background
colour, text position and display time with the sub options.
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
To preview each image by pressing the Preview soft key
and return the image list by pressing
.
The following options are available.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Note: The name of the downloaded image is not displayed
in the phone, but shown in the PC link.
Disable: you can phone any number.
LCD Contrast
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
This option allows you to adjust the contrast of the LCD
screen. Press
contrast.
to increase or
to decrease the
To change your PIN2, refer to menu option 5-3-7
below.
Menu Colour
Change PIN2
This option allows you to select the pattern of the menu.
You can choose one of three patterns.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
Service Colour
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
There are six colours available for the service light: green,
orange, red, violet, blue and sky blue.
You can scroll through these colours, by pressing
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
or
key. Press the Select soft key to select
the required colour.
96
97
S e t t in g s
Organizer
Browser Settings
Menu 5-5
Note: This menu may not be shown depending
The Organizer feature enables you to:
• Write your schedule or to do list
• Use a calculator
on your network service provider.
You can setup several proxies using the Proxy
Settings menu (5-5-1), and you can choose one of
those for a current proxy using the Current Proxy
menu (5-5-2). Each proxy has following information.
These may vary depending on your service provider.
Contact the service provider for further details.
• Check the calendar
• Set the current date and time
•
Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Find out what time it is in various cities around
the world
Proxy Name: To view or edit the name of proxy.
Scheduler
Menu 6-1
WDP Address: To view or edit the WDP address.
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings, and birthdays.
The phone sounds an alarm tone when the set date
for a birthday, reminder or call is reached.
Port Number: To view or edit the number of the port
used for connecting to the gateway.
Home URL: To view or edit your home URL address.
Note: Your phone must be switched on to use this
Access Point : To view or edit the following settings.
function.
When you access the Scheduler menu, the
following options are available:
NAS Phone Number: You can set the number of the
PPPserver.
Login Name: You can set the login name of the PPP
server. You can ignore it, if it’s not necessary.
Go to date: allows you to enter a particular date and
to make a schedule on that date.
View All: shows the schedules you have made.
Password: You can set the password of the PPP
server. You can ignore it, if it’s not necessary.
Delete All: deletes all the schedules you have
made.
Network Type: You can select one of network types
among V.32 Transparent, V.32 Non-Transparent, V.110
Transparent and V.110 Non-Transparent.
98
99
Org a n is e r
Org a n is e r
A date that has a schedule associated is displayed with
an underline. If you select a date where a schedule has
already been created, its contents will be displayed.
To create a new schedule, proceed as follows.
1. When a calendar screen appears, select the month
by using the volume key on the left side of the
Note:If you have created more than two schedules for
phone, select the week by using
select the day by using and
or
, and
a day, you can scroll to the desired schedule by
. You can
pressing
or
.
also use the Go to date menu option to specify
the date.
The following options are available:
Note: If you want to cancel your selection in the
Add: allows you to add new contents. For details on
entering text, see page 42.
Delete: deletes the schedule.
Calendar screen, press
The phone goes
back to the previous menu level.
Move: moves the schedule to a new date of your
choice.
Copy: copies the schedule to a new date of your choice.
Delete Day: deletes schedules on the date.
2. When you press the OK soft key, you can select a
schedule type. Four types are available:
• Reminder: requires contents and the time.
• Call: requires a phone number and the time.
• Meeting: requires contents and the time.
• Birthday: requires a name and the time.
Alarm
Menu 6-2
3. Enter the appropriate information, referring to
page 42 for further details on how to enter text if
necessary.
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available.
4. If you want to set an alarm on the scheduled date
and time, select Yes when the phone asks you to
set alarm and specify the alarm time.
Daily Alarm: the alarm rings everyday at the same
time.
Once Alarm: the alarm rings only once and is then
If you select No, the phone just saves the
deactivated.
schedule and returns to idle mode.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
Alarm Tone: allows you to select a specific tone for the
alarm ringer.
100
101
Org a n is e r
Org a n is e r
Calculator
Menu 6-3
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
You can use the phone as a 9-digit calculator. The
calculator performs basic arithmetic functions;
addition, subtraction, multiplication, division.
Percentage operation is also available.
2. Set Alarm option allows you to set the alarm time
or days of the week.
To use the calculator, proceed as follows.
If you choose Weekly Alarm, select the required
day of the week and press
appears to indicate that the day is selected. Repeat
as necessary.
. The symbol
*
1. Enter the first figure using the number keys.
2. Press the Operator soft key until you find the
desired arithmetic symbol; + (add), - (subtract), x
(multiply), / (divide).
To remove it, press
.
You can set more than one day.
3. Press the OK soft key.
3. Enter the second figure.
4. Enter the required time, then press the OK soft key.
4. Repeat Steps 2 and 3 if necessary.
5. To get the result, press the Equal soft key or
To erase any mistakes or clear the display, use
Alarm Activated is displayed.
.
Once an alarm has been set, you can see the alarm
icon ( ) in the top line of the display. To stop the
alarm when it rings, open the phone and press any
key.
.
To enter a decimal point, press
two decimal places.
. It calculates to
To deactivate the alarm, select Remove Alarm.
Note: When your phone is switched off, the alarm
doesn’t work.
102
103
Org a n is e r
Org a n is e r
To Do List
Menu 6-4
Examples:
This menu allows you to write a job list with
priorities and deadlines and also sort the jobs
according to their priority type or their status. If you
don’t have any items in the list, proceed as follows
to make your to do list.
Expression
Key operation
Result
41
12*3+5=
34+57=
12x3+5
34+57
45
(or
(or
(or
(or
(or
(or
(or
(or
(or
)
)
91
45+57=
)
)
)
102
25
1. press the New soft key to input a new item.
48-23=
48-23
14
14-23=
-9
2. Input your details.
For information on how to enter characters, see
page 42.
68*25=
68x25
40
)
1700
2720
2.5
7
68*40=
)
35/14=
35/14
98
)
3. Press the OK soft key.
98/14=
)
10% of 200
10=? % of 100
200x10
10/100
20
4. Select the priority type using the Select soft key.
(1 or 2)
10
10% premium of 200 200+10
10% discount of 200 200-10
220
180
16
5. Input deadline.
6. Press the Yes soft key.
square of 4
4x
8/
(or
(or
)
reciprocal of 8
)
0.12
If you have any other items in the list, you can see
the list in the display with a mark box, priority level
and job details.
Note: When you have finished with the calculator,
press to exit the calculator and return to the
previous menu level.
To see the detailed contents of an item, press the
View soft key. In this view, if you press
, a
mark box, date and time created will be displayed.
To mark your item, press
. The key toggles
between marking and unmarking the viewed job.
104
105
Org a n is e r
Org a n is e r
World Time
Menu 6-6
You can choose the following options, by pressing the
Options soft key.
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
New : allows you to write new item.
Mark : allows you to mark an item or job.
Edit : allows you to edit your item’s details.
cities using
.
The screen shows the:
• City name
• Current date and time
Sort : allows you to sort according to priority 1,
priority 2, or marking status.
• Time difference between the selected city and your
city if you have set the local time (see below for
further details) or GMT (by default)
Copy : copies one item to another.
Delete : deletes the item.
To select the time zone in which you are located,
proceed as follows.
Delete All : deletes all items.
1. Select the city corresponding to your time zone by
Calendar
Menu 6-5
pressing
one or more times.
The local date and time are displayed.
You can view calendars of 1900 through to 2099.
You can also view the lunar date of the selected date.
2. Press the Set soft key.
3. To...
Update the current
Then press the...
• Use
to a previous day.
• Use or
or
to moves to the next day or back
Set Local soft key.
date/time with this
new setting
to moves to the next week or back
to a previous week.
• Use the volume key on the left side of the phone to
move to the next or previous month.
Indicate that the
time zone is currently A check mark is shown
Set DST soft key.
using the daylight
saving time
next to the time
difference.
Note: You can also use
and or
or
to select the day
to select the week.
Indicate that the
Remove DST soft key
time zone is no longer (only available when the
You can see another date by selecting the Goto soft
using the daylight
saving time
check mark is shown
next to the time
difference).
key.
106
107
Org a n is e r
Games
Clock
Menu 6-7
Using this menu you can also enjoy games on the
phone.
Set Time
Allows you to change the time displayed, using the
24-hour system.
Scroll to the desired game and press the Select soft
key.
Note: Before setting the time, you must specify your
The following options are available.
time zone, via the World Time menu option (6-6).
New Game: allows you to start a new game.
Set Date
High Score: shows you the highest scores table.
Allows you to change the date displayed. Enter the
day, month and year.
Not all games have a high score table.
Key Info.: shows you what keys do what within the
Format
game.
Allows you to select the format of date between
DD/MM/YYYY and MM/DD/YYYY.
Continue: allows you continue a previously saved
game. The menu is only available when a
game has already been saved.
While you are playing a game,
To...
Then press the...
adjust the game volume
pause the game
volume keys
pause and exit the game
108
109
Ga m e s
Ga m e s
If your finishing score is ranked fifth or higher, you are
allowed to enter your name using up to 10 characters.
Key Commands
1: move up
4: move left
5: move right
7: move down
6: launch a missile
9: drop a bomb
Here are the list of available characters or function.
1: . @ - _ / : ~ 1
2: A B C 2
3: D E F 3
4: G H I 4
5: J K L 5
6: M N O 6
7: P Q R S 7
Space War
Menu 7-2
8: T U V 8
9: W X Y Z 9
Object
0: 0
: to clear a previous character
left/right soft key: to move the cursor left or
right
It is an arcade board game. It requires patience and
discretion. The aim is to remove about 80% of the
black background while avoiding the mushroom
bombs in order to progress to the next stage.
: to move the cursor to the next position
AirShooting
Menu 7-1
When you start a new game, press
to start.
Key Commands
Object
2: move up
4: move left
6: move right
8: move down
5: stop
The goal of the game is to drive a fighter plane to its
destination. There are 3 stages, each stage is harder
than the previous and the weapons get more powerful
with each stage.
When you start a new game, press any key to select a
player. Press 1 or 7 to scroll up or down, and press 9 to
start a game.
110
111
Ga m e s
WWW Services
MyPet
Menu 7-3
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
Object
To care for a virtual pet cat. Choose a cat from a
choice of three colours. You will need to care for the
cat, feed it at least 3 times a day, bath it, read to or
play with it and give it medical attention if sick. This
is all done by selecting the appropriate symbol at the
bottom or the display. Your pet will be judged at a
pet contest once a month and then placed as 1st,
2nd, or 3rd. The game ends when your pet either
runs away or you abandon it by not feeding it for
more than 5 days.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (5-1-2).
Home
Menu 8-1
To launch the browser from the idle mode, press
the key in the centre of the scroll button.
When you start a new game, pressing the left or
right soft key scrolls through the available pets and
Once connected, the homepage is displayed. The
content depends on the service provider.
then press
to select the pet and start the
game. The game starts by showing the house were
the pet lives. A sun or moon at the window shows
whether it is day or night. Selecting the ? option at
the bottom of the display will show you the status of
your pet.
To exit the browser at any time, press the
The idle screen is displayed.
key
.
112
113
WWW S e rv ic e s
WWW S e rv ic e s
Goto
Menu 8-3
Bookmark
Menu 8-2
You can open any WWW page by entering its URL
address.
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
Enter the URL address and press the Go soft key.
Three options are available.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 14 characters).
2. Press the OK soft key.
Navigating with the WAP Browser
3. Enter the URL address (up to 128 characters).
4. Press the OK soft key.
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Using the Phone Keys
Go: allows you to open the selected page.
When surfing the Internet, the phone keys function
differently from the phone mode.
Delete: allows you to delete the selected bookmark.
To...
Then press the...
or key.
Scroll each line of the
content area
Return to the previous page
key (except on
the homepage).
Return to the startup
homepage
key and hold it
down anywhere.
114
115
WWW S e rv ic e s
WWW S e rv ic e s
Using the WAP Browser Menu
Show URL: shows the URL of the current page.
HomePage: moves to the homepage.
There are various menu options available when surfing
the Wireless Web.
Offline Services: allows you to copy and save Web pages so
that you can view them, even if the network is down.
To access the WAP Browser menu, proceed as follows.
Outbox: stores outgoing requests from the browser so that
they can be processed at a later date.
1. Press
A list of menu options appears.
.
Restart Up.Browser: clears the cache memory and displays
the homepage.
2. Highlight the required option using the
key.
or
Encryption: allows you to check and generate the security
key required to contact a server.
3. Press the OK soft key to select the option.
4. If necessary, select the secondary option by pressing
the or key, followed by OK.
Entering Text, Numbers, or Symbols
Note: The WAP Browser menus may vary, depending on
your version of the browser.
When you are prompted to enter text, the current text entry
mode appears above the right soft key: abc/Abc/ABC, NUM
or SYM 1 ~ 4. To change modes, press the right soft key
until the required mode is displayed.
The following options are available.
Reload: reloads the current page.
Home: takes you back at any time to the homepage of
the Wireless Web service provider.
abc/Abc/ABC: allows you to enter lower-case and upper-
case letters. You can switch between lower-and upper-case
Bookmarks: allows you to load a bookmarked Web
page directly.
letters by pressing the
key
.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the More
soft key.
Mark Site: adds the current page to your bookmark list.
About Phone.com: shows the version of the WAP
Browser.
NUM: allows you to enter numbers.
Advanced...: gives you access to the following
advanced features. Some features may not be supported
by your network operator
117
116
WWW S e rv ic e s
If you wish to edit text, move the cursor to the
required position, using
letter by pressing the
correct letter.
, and clear the wrong
key. Then enter the
Network Connection Information
To check the network connection time, press and
hold down the
key. You can see the
connection time on the last line of the content area.
The linger time is one or more minutes (depending on
your service provider). Consequently, if you do not
use the browser for one or more minutes, the
network is disconnected automatically. In this case,
you can see that the connection time is stopped at
that point.
The connection time is reset whenever you exit the
browser.
118
Additional Services
ALS(Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
1. Selecting a Line
You can set a line for use, or manually for each call
with the Active Line Menu (5-1-12).
For further details, refer to page 83.
2. Editing the Line Name
You can edit the name of each line with the Own
Number Menu (5-1-2).
When you edit the name of a line, you can see the
name in every menu string which are shown as “Line
1” or “Line 2”. For further details, refer to page 79.
119
Ad d it io n a l S e rv ic e s
Solving Problems
Before contacting after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone Menu (4-1).
When you switch your phone on, the following
messages appear
See page 72 for further details.
Insert SIM Card
• Check that the SIM card is correctly installed.
4. Setting Call Diverting Options
Phone Locked
You can set up call diverting with Call Diverting
Menu (5-2-1). This service enables incoming calls of
the line which you want to be reroute to the number
that you specify. Please see page 84 for further
details.
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
120
121
S o lv in g P ro b le m s
S o lv in g P ro b le m s
“No service” is displayed
The phone starts beeping and “**Warning**
Battery Low” flashes in the display
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
• The battery is insufficiently charged. Replace the
battery and recharge it or connect the battery
charger.
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
You have entered a number but it was not dialled
• Have you pressed
?
signal strength from strong (
) to weak ( ).
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
• Try moving the phone slightly or moving closer to
a window if you are in a building.
Your correspondent cannot reach you
No number is dialled when you recall a
phonebook entry
• Is your phone switched on (
than one second)?
pressed for more
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
If the above guidelines do not enable you to solve
the problem, take a note of:
Your correspondent cannot hear you speaking
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
right side of the phone.
Then contact your local dealer or SAMSUNG
after-sales service.
122
123
Re f e re n c e In f o rm a t io n
Reference Information
Access Codes
PIN code
The PIN (Personal Identification Number) code protects
your SIM card against unauthorised use. The PIN code
is usually supplied with the SIMcard. When the PIN
code request is enabled (Menu 5-3-1), the code is
asked each time the phone is switched on.
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The access codes (except for the PUK and PUK2 codes)
can be changed using the Security Settings menu (5-
3) options. See page 94 for further details.
If you key in an incorrect PIN code three times in
succession, key in the PUK code and press the OK soft
key. Key in a new PIN code and press the OK soft key.
Key in the new PIN code again and press the OK soft
key.
Phone Password
This security code can be used to avoid unauthorised
use of the phone. The security code 0000 is the factory
default setting but you are advised to change the
security code before you start using your phone. Keep
the new code secret and in a safe place, which is
separate from the phone.
PIN2 code
The PIN2 code, supplied with some SIM cards, is
required to access some functions, such as charging
unit counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 code three times in
succession, key in the PUK2 code and press the OK soft
key. Key in a new PIN2 code and press the OK soft
key. Key in the new PIN2 code again and press the OK
soft key.
If you key in an incorrect security code five times in
succession, the phone will not accept the correct code
for the next five minutes.
124
125
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Using the Batteries
PUK code
Your phone is powered by a rechargeable Li-ion
standard battery.
The following batteries are also available (ask your
SAMSUNG dealer for further details):
– Slim battery
The PUK (Personal Unblocking Key) code is required
to change a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your local
service provider.
– Standard battery
If you key in an incorrect PUK code ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
You cannot change the PUK code. If you lose the
code, contact your service provider.
• Use the battery only for its intended purpose.
PUK2 code
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code.
If you key in an incorrect PUK2 code ten times in
succession, you cannot use the functions requiring
the PIN2 code. Contact your service provider for a
new card.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
You cannot change the PUK2 code. If you lose the
code, contact your service provider.
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
• If left unused, a fully charged battery will
discharge itself over time.
126
127
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Safety Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
youcarry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
128
129
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Operating Environment
• Switch off your cellular phone when in an aircraft.
The use of cellular phones in an aircraft is illegal
and may be dangerous to the operation of the
aircraft or disrupt the cellular network. Failure to
observe these instructions may lead to the
suspension or denial of cellular telephone
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
services to the offender, legal action or both.
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• The effect of the GSM transmit/duty cycle on
hearing aids and pacemakers is being
investigated, and there is potential hazards
associated with use close to such personal
medical electronic devices.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up (to its normal temperature),
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
130
131
Re f e re n c e In f o rm a t io n
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important!This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential
communications (medical emergencies for
example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
132
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
Active Folder
Ability to voice dial or voice command immediately on
opening the phone.
ALS(Alternate Line Service)
ALS provides the capability of associating two
alternate lines with one SIM card. You can make and
receive calls on either line as desired with this
service.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another mobile or fixed line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
133
Glo s s a ry
Glo s s a ry
GSM (Global System for Mobile Communication)
PUK (PIN Unblocking Key)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Line Identification Services
Roaming
Service allowing subscribers to view or block the
telephone numbers of callers.
Use of your phone when you are outside your home
area (when travelling for example).
Multi-party Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Phone’s Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-
digit number and can be changed, as required.
134
135
Glo s s a ry
Index
multiparty • 32
received (1-2) • 55
records (1) • 55
searching for a number in
the phonebook • 40
time (1-4) • 56
A
Soft Keys
Access codes • 124
Accessories • 7
Active Folder • 82
Active Line • 83
Alarm (6-2) • 101
Alert Type (4-4) • 75
ALS • 119
Any-key Answer • 80
Auto Answer • 81
Auto Redial • 81
and
on the phone, the purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
via the phonebook • 23
waiting• 89
Call Time (1-4) • 56
Call Waiting • 31; 89
Care • 131
Changing
passwords • 95
PIN • 95
Voice Mail
B
Backlight • 13; 80
Barring
PIN2 • 96
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
Characters
calls • 87
entering • 42
password • 126
Batteries
Charging batteries • 17
Clock (6-7) • 108
Closed User Group • 92
Conference calls
• See Multiparty calls
Connect Tone (4-9) • 77
Connect to Voice
Mail (2-1) • 58
charging • 17
installing • 15
low battery indicator • 19
precautions • 127
Broadcast (2-6) • 63
Browser Settings (5-5) • 98
Contrast • 97
Copying phonebook
numbers • 38
Cost of calls(1-5) • 57
CUG (9-6)• 92
C
Calculator (6-3) • 103
Calendar (6-5) • 106
Call Barring • 87
Call Cost (1-5) • 57
Caller ID • 82
Calls
D
Date setting (6-7) • 108
answering • 25
answering a second
call • 31
Deleting
melody • 74
messages • 60
barring • 87
missed calls • 26
phonebook entries • 38
voice commands • 70
voice dial numbers • 69
voice memos • 71
Dialled Calls (1-3) • 56
Dialling • 22
cost (1-5) • 57
dialled (1-3) • 56
diverting • 84
emergency • 132
ending • 23
holding • 30
international • 22
making • 22
voice • 23; 67
Display
missed • 26; 55
external • 9;13
icons • 12
layout • 8
Diverting calls • 84
136
137
In d e x
In d e x
storing numbers/
names • 35
N
Names
E
L
Earmicrophone • 21
Earpiece volume • 24
Emergency calls • 132
Entering text • 42
Language • 79
Last number redialling • 23
LCD
voice recording • 37
entering • 42
PIN • 125
searching/dialling • 40
storing • 35
changing • 95
checking • 94
display • 11
Network Selection • 90
Network Services (5-2) • 84
Number
Error Tone (4-7) • 77
settings • 97
PIN2 • 125
Length of calls • 56
Letters
changing • 96
Preset Message
List (2-4) • 62
F
caller • 82
own • 79
entering • 42
FDN Mode • 96
Fixed Dial Number
mode • 96
Line Identification • 91
Locking
Problem, solving • 121
PUK • 126
PUK2 • 126
searching/dialling • 40
storing • 35
phone • 95
Functions
voice dial • 23; 67
SIM card • 96
Low battery indicator • 19
selecting • 49
O
R
G
M
Organiser (6) • 99
Options
selecting • 49
Own Number • 79
Read Messages (2-2) • 59
Received Calls (1-2) • 55
Recording
Games (7) • 109
Maintenance • 131
Melody composer (4-2) • 73
Menu
Glossary • 133
Greeting Message • 78
answering message • 71
memos • 70
scrolling • 51
H
structure • 52
P
voice commands • 70
voice dial names • 68
voice dial numbers • 68
Records
Message Tone (4-6) • 76
Messages • 58
broadcast (2-6) • 63
greeting • 78
Holding calls • 30
Password
barring • 126
I
changing • 95
call (1) • 55
phone • 124
Icons • 12
picture (2-7) • 65
preset (2-4) • 62
reading • 59
Redialling
Pasting phonebook
numbers • 37
Personal Identification
Number • See PIN
Phone
Identifying a caller • 82
Information numbers • 41
Input mode
automatically • 81
last number • 23
ring tone • 72
Reference information • 124
Replaying memos • 71
Reset Settings • 83
Ring Tone (4-1) • 72
Ring Volume (4-3) • 75
Roaming • 135
changing • 43
setup (2-5) • 62
voice (2-1) • 58
writing (2-3) • 61
Microphone mute • 28
Minute Minder (4-8) • 77
Missed calls (1-1) • 55
deleting • 27
editing the number • 27
viewing • 26; 55
Multiparty calls
dropping a
setting • 79
layout • 8
lock • 95
International calls • 22
Internet • 113
password • 124
Settings (5-1) • 78
Phonebook • 35
copying numbers • 38
deleting recorded
names • 37
K
Key tones
S
Safety
adjusting • 24
muting • 34
selecting • 76
sending • 34
Keypad Tone (4-5) • 76
Keys
batteries • 127
information • 129
precautions • 5
dialling • 40
editing numbers • 38
erasing numbers • 38
making calls • 22; 40
pasting numbers • 37
playing recorded
names • 37
participant • 33
making • 32
Scheduler (6-1) • 99
Second call • 31
Security Settings (5-3) • 94
Selecting functions/
options • 49
Sending key tones • 34
Service directory • 39
Service light • 14; 81
location • 8
purpose • 9
private conversation • 32
Mute
key tones • 34
microphone • 28
searching • 40
138
139
In d e x
Setting
playing recorded
names/numbers • 69
recording • 68
alarm • 101
date• 108
text language • 79
time• 108
Voice functions (3) • 67
Voice language
Settings
selecting • 79
LCD (5-4) • 97
phone (5-1) • 78
reset • 83
Voice mail (2-1)
connecting to • 58
server number • 59
Voice Memo (3-3) • 70
deleting • 71
security (5-3) • 94
Setup (2-5) • 62
SIM card
recording • 71
installing • 15
replaying • 71
Voice Server Number • 59
Volume
adjusting • 24
selecting the ring
(4-3) • 75
locking • 96
SIM Lock • 96
SMS messages • 34
Solving problems • 121
Switching on/off • 20
T
Text
W
World Time (6-6) • 107
Write Messages (2-3) • 61
WWW Services (8) • 113
entering • 42
input modes • 42
language • 79
Time
setting • 108
world (6-6) • 107
To Do List (6-4)• 105
Tone
connect (4-9) • 77
error (4-7) • 77
keypad (4-5) • 76
message (4-6) • 76
ring (4-1) • 72
Travel adapter • 17
U
Unpacking • 7
User groups • 92
V
Voice command (3-2) • 70
Voice dial (3-1) • 21; 67
activating • 68
deleting numbers • 69
140
141
142
|