Samsung SGH E870 User Manual

SGH-E870

User’s Guide

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 97.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

•

Music player

Play music files using your phone as

a music player.

Indicates that you can get more information on

the referenced page.

ꢀ

File viewer

Open documents in various formats

on the phone without corruption.

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

Indicates a key on the phone. For example,

[

]

Web browser

[

]

Access the wireless web to get up-

to-the-minute information and a

wide variety of media content.

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

< >

•

Image editor

Crop, resize, rotate, and decorate

your photos.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, image, video, and audio.

Voice commands

E-mail

Experience a new level of voice

command capability that allows for

easy hands-free use. You can select

menus, control camera settings, as

well as make phone calls without

any key presses.

Send and receive e-mails with image, video, and

audio attachments.

•

Get personal with photo/video

caller ID

See who’s calling you when their

very own photo or video displays.

•

Bluetooth

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

Phone to TV

View photos and video clips

captured with the phone on your TV

screen.

Photo printing

Print your photos to preserve your

best moments forever.

•

Java

Enjoy Java

games and download new games.

™-based embedded

Browse the web...................................................... 17

Use Phonebook ...................................................... 17

Send messages...................................................... 19

View messages....................................................... 20

Use Bluetooth ........................................................ 22

Use Voice commands .............................................. 23

Use a memory card................................................. 24

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Keys, features, and locations

Get started

AB, T9, Number, and Symbol modes

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, the music player, the web, and

other special features

Use the camera...................................................... 14

Play music............................................................. 15

Index

104

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

ꢀ

p. 32

3 Applications

ꢀ

p. 38

5 Messages

ꢀ

p. 52

8 Camera

9 Settings

ꢀ

p. 76

p. 83

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp. 32

ꢀp. 33

ꢀp. 34

1 Music player

2 Voice recorder

3 Image editor

4 Java world

5 World clock

6 Alarm

7 Voice commands

8 Calculator

9 Converter

ꢀp. 38

ꢀp. 41

ꢀp. 42

ꢀp. 44

ꢀp. 45

ꢀp. 47

ꢀp. 48

ꢀp. 49

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀp. 52

ꢀp. 55

ꢀp. 60

ꢀp. 61

ꢀp. 66

ꢀ

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Connection settings

10 Reset settings

ꢀp. 83

ꢀp. 84

ꢀp. 85

ꢀp. 87

ꢀp. 90

ꢀp. 92

ꢀp. 93

ꢀp. 95

6 Call time

6 Memory status

7 Call costs^*

6 My Files

ꢀp. 66

2 Phonebook

ꢀp. 34

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory card^**

7 Memory status

ꢀp. 66

ꢀp. 68

ꢀp. 69

ꢀp. 70

ꢀp. 72

10 Timer

1 Contact list

2 Create contact

3 Group

ꢀp. 34

ꢀp. 35

ꢀp. 36

ꢀp. 37

ꢀp. 38

11 Stopwatch

12 Key management

13 SIM AT^*

4 Speed dial

5 My namecard

6 Own number

7 Management

8 Service number^*

4 Browser

ꢀp. 49

* Shows only if supported by your

SIM card.

** Shows only if a memory card is

inserted.

1 Home

ꢀp. 49

ꢀp. 50

ꢀp. 51

ꢀp. 52

7 Calendar

ꢀp. 72

2 Enter URL

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

Unpack

Your phone

Make sure you have each item

Keys, features, and locations

Earpiece

Main display

Flash

Phone

Travel Adapter

Camera lens

Camera key

Navigation keys

(Up/Down/Left/

Right)

External

display

Web access/

Confirm key

Right soft key

Memory

card slot

Battery

Left soft key

User’s Guide

Power on/off/

Menu exit key

Delete key

Volume keys

Dial key

You can obtain various accessories from

your local Samsung dealer.

Headset jack

The items supplied with your phone

and the accessories available at your

Samsung dealer may vary, depending

on your country or service provider.

Alphanumeric

keys

Microphone

Special

function keys

Get started

Install the battery.

Replace the cover.

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Plug the travel adapter into the phone.

Install and charge the phone

Remove the battery

cover.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

Make sure that the gold-

coloured contacts on the

card are face down into

the phone.

If the phone is already

on, first turn it off by

holding [

Get started

Power on or off

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

Switch on

1. Open the phone.

Remove the adapter from the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK>.

use is prohibited.

1. Open the phone.

Low battery indicator

Switch off

When the battery is low:

•

a warning tone sounds,

2. Press and hold [

the low battery message displays, and

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Keys

Perform the function indicated on the bottom

line of the display.

In Idle mode, press and hold the left soft key

to initiate a menu search. Press and hold the

right soft key to initiate a name search.

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

your voicemail server. Press and hold [

0] to

In Idle mode, access your favourite menus

enter an international call prefix.

directly.ꢀp. 84

Enter special characters.

In Menu mode, scroll through menu options.

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

[

] to enter a pause between numbers.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume.

Make or answer a call.

With the phone closed, press and hold [ ] to

get a verbal time check. Press and hold [ ]

to turn on the external display or flashlight.

In Idle mode, retrieve numbers recently

dialled, missed, or received.

Delete characters from the display, or an

item in an application.

In Idle mode, press and hold to turn on the

camera.

In Camera mode, take a photo or record a

video.

Get started

Display

Layout

New e-mail

New voicemail

Call diverting feature active

Icons

display various icons.

Home Zone, if registered for the

appropriate service

Office Zone, if registered for the

appropriate service

Text and graphics

display messages,

instructions, and

information you enter.

Bluetooth active

Connected to Bluetooth hands-free

car kit or headset

Synchronised with PC

MP3 playback in progress

MP3 playback paused

Memory card inserted

Soft key function

indicators

Contacts

show the current functions

assigned to the soft keys.

Icons^*

Received signal strength

Call in progress

Out of your service area; you cannot

make or receive calls

Alarm set

Call ringer set to vibrate

GPRS network

Quiet mode (Vibration)

EDGE network

Quiet mode (Mute)

Mute mode, during a call

Battery power level

Connecting to GPRS network

Connected to Internet

Roaming network

New message

* Depending on your country or service provider, the

icons shown on the display may vary.

Access menu functions

Select an

option

1. Press a desired soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [

] to

confirm the function displayed

or option highlighted.

Select

Back

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

•

Press [

mode.

] to return to Idle

Use shortcuts Press the number key

corresponding to the option you

want.

Press the right

soft key to return

to the previous

menu level.

Press the left

soft key to select

the highlighted

option.

Get started

Customise your phone

You can set wallpaper for the idle

screen on each display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

Main

display or Cover display

2. Select an image or a video

category.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

3. Select an image or a video.

4. Press <Select>.

2. Select a ringtone category.

3. Select a ringtone.

5. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

4. Press <Save>.

Menu mode

skin colour

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

You can set the Navigation keys to

function as shortcuts to access

your favourite menus.

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

shortcuts

1. In Idle mode, press <Menu

and select Settings Phone

settings Shortcuts

2. Select a key.

→

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

3. Select a menu to be assigned to

the key.

00000000, and press <OK>.

3. Enter a new 4- to 8-digit

You can switch the phone to Quiet

mode to avoid disturbing other

people.

Quiet mode

password and press <OK>.

4. Enter the new password again

and press <OK>.

Press and hold [ ] in Idle mode.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Make/Answer calls

Step outside the phone

Begin with your camera, the music player, the web, and

other special features

1. In Idle mode, enter an area

Make a call

code and phone number.

Use the camera

2. Press [ ].

3. To end the call, press [

1. Open the phone.

Take a photo

1. When the phone is ringing,

press [ ].

2. In Idle mode, press and hold

Answer a call

[

]

to turn on the camera.

2. To end the call, press [

3. Aim the lens at the subject and

make any desired adjustments.

Press [ / ].

4. Press [

] or [ ] to take a

Adjust the

volume during

a call

photo. The photo is saved

automatically.

5. Press <Preview> to take

another photo.

1. In Idle mode, press <Menu

View a photo

and select My Files

My photos

2. Select the photo you want.

→

Images

→

Play music

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

Use these methods:

Copy music

files to the

phone

2. Press [1] to switch to Record

•

Download from the wireless

web p. 49

mode.

ꢀ

3. Press [

] or [ ] to start

•

Download from a computer

using the optional Samsung PC

recording.

4. Press [

], < >, or [ ] to

StudioꢀSamsung PC Studio

stop recording. The video is

saved automatically.

User’s Guide

•

Receive via Bluetoothꢀp. 92

Copy to a memory card and

insert the card into the phone

5. Press <Preview> to record

another video.

ꢀp. 24

1. In Idle mode, press <Menu

Play a video

and select My Files

My video clips

2. Select the video you want.

→

Videos

→

Step outside the phone

1. In Idle mode, press <Menu

and select Applications

Music player

2. Press <Options> and select

Add music from Phone or

Memory card

3. Press [ ] to select the files

1. From the music player screen,

Play music files

Create a play

list

→

press [

2. During playback, use the

following keys:

→

•

: pauses or resumes

playback.

•

Left: returns to the previous

file.

you want and press <Select>.

•

Right: skips to the next file.

Up: opens the play list.

/ : adjusts the volume.

Down: stops playback.

4. Press <Back> to return to the

music player screen.

Browse the web

Use Phonebook

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

To the phone’s memory:

Add a contact

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save contact

→

Phone

In Idle mode, press [

→

New a number type.

→

Launch the

web browser

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Note.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

To select an item, press [

4. Press <Save> to save the

contact.

To return to the previous page,

press <Back>.

•

To move to the next page, press

Options> and select Go

Forward

To access options, press

Options>.

→

Step outside the phone

To the SIM card:

1. In Idle mode, press <Menu

and select Phonebook My

namecard

Add a contact

Create and

send a name

card

→

(continued)

1. In Idle mode, enter a phone

number and press <Options>.

2. Specify your contact

information.

2. Select Save contact

New

3. Enter a name.

→

SIM

→

3. Press <Save> to save the

name card.

4. Press <Save> to save the

4. To send the name card, press

contact.

<Options> and select Send

via a sending method.

→

1. In Idle mode, press

Find a contact

<Contacts>.

2. Enter the first few letters of the

name you want.

3. Select a contact.

4. Scroll to a number and press

[

]

to dial, or press [

] to

edit contact information.

Send messages

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

Send a text

message (SMS)

5. For Image and video, select

Add image or Add video and

add an image or a video clip.

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

→

For Sound, select Add sound

and add a sound clip.

Save and send or Send only

6. Select Message

7. Enter the message text and

press [ ].

8. Press <Options> and select

Send

4. Enter destination numbers.

5. Press [

message.

] to send the

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

9. Enter destination numbers or

addresses.

→

multimedia

message

(MMS)

message

→

10.Press [

message.

] to send the

2. Select Subject

3. Enter the message subject and

press [ ].

Step outside the phone

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messages

message Email

2. Select Subject

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

→

Create

When a notification appears:

View a text

message

→

1. Press <View>.

2. Select the message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

2. Select an SMS message ( ).

→

[

→

7. Add image, video, sound, music

files, or document files.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

When a notification appears:

1. Press <View>.

1. In Idle mode, press <Menu

and select Messages My

messages Email inbox

2. Select an account.

View a

multimedia

message

View an e-mail

→

2. Press <Options> and select

Retrieve

3. Press <Yes> to download new

3. Select the message from the

Inbox.

e-mails or headers.

4. Select an e-mail or a header.

From the Inbox:

5. If you selected a header, press

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

2. Select an MMS message (

Options> and select

→

Retrieve

→

Step outside the phone

Use Bluetooth

1. Access an application,

Phonebook My Files, or

Calendar

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

2. Scroll to an item.

3. Press <Options> and select

Send via

→

Bluetooth.

In Idle mode, press <Menu> and

Turn on

Bluetooth

select Settings

→

Bluetooth

→

4. Select a device.

Activation On

→

5. If necessary, enter the

Bluetooth PIN and press <OK>.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

→

Search for new devices

2. Select a device.

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Voice recongnition

1. In Idle mode, press <Menu

and select Applications

Voice commands Name

Search for a

name

Your phone can recognise specific voice commands in

order to dial a number or search for names in

Phonebook, or access menus. Your phone recognises

only English, French, German, Italian, Spanish, and

Russian.

→

2. At the voice prompt, say a

name.

1. In Idle mode, press <Menu

and select Applications

Voice commands Name

dial

3. If necessary, say “Next” or

“Previous” to select the name

you want.

Dial a name

→

4. Say nothing for 3 seconds or

2. At the voice prompt, say a

name.

press [

] and the phone will

display contact information.

3. If necessary, say “Next” or

“Previous” to select the name

you want.

4. If the name has more than one

number, press [Left] or [Right]

to select the number you want.

5. Say nothing for 3 seconds or

press [

] and the phone will

dial the currently selected

number.

Step outside the phone

Use a memory card

You can use an optional microSD memory card to

enlarge your phone’s memory capacity.

1. In Idle mode, press <Menu

and select Applications

Voice commands Direct

Access a menu

→

• Frequent erasing and writing will

shorten a card’s lifespan.

Important

memory card

2. At the voice prompt, say a

menu name, for example,

Phonebook.

• Do not remove a card from the

phone or turn off the phone

while data is being accessed or

transferred. This could result in

loss of data and/or damage to

the card or phone.

information

3. Say nothing for 3 seconds or

press [

] and the phone will

open the menu.

• Do not subject cards to strong

shocks.

• Do not touch card terminals with

your fingers or metal objects. If

dirty, wipe the card with a soft

cloth.

• Keep cards away from small

children or pets.

Using a card adapter and a USB

card reader/writer, you can read

the card on a PC.

Use a card

adapter

• Do not expose cards in a place

subject to electro-static

discharge and/or electrical

noise.

1. Insert a memory card into a

card adapter, and then the

adapter into a card reader/

writer.

2. Plug the USB connecter of the

card reader/writer into the USB

port on your PC.

1. Insert the card into the card

slot, with the label side face

down.

Insert a

memory card

3. Access the appropriate memory

disk and copy to and from the

card.

2. Push the card in with your

thumb until it locks into place.

Using AB mode

Press the appropriate key until the character you want

appears on the display.

Enter text

AB, T9, Number, and Symbol modes

You can enter text for some features, such as

Messages, Phonebook, or Calendar, using AB mode, T9

mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9 mode

) and AB mode ( ). Depending on your

(

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

mode (

Press and hold [ ] to switch to Symbol mode.

(Creating an SMS message with GSM-Alphabet encoding)

2. Enter the whole word before editing or deleting

characters.

Other AB mode operations

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Other T9 mode operations

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

Entering a word in T9 mode

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

Call functions

4. Enter the word you want using AB mode and press

<OK>.

Advanced calling features

Using Number mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [

• Press [

] to clear the whole display. You can move the

C] to clear the last digit or press and hold

Using Symbol mode

Symbol mode enables you to insert symbols.

cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between

numbers.

Press

display more symbols

select a symbol

[Up] or [Down].

Making an international call

1. In Idle mode, press and hold [

appears.

the corresponding

number key.

0]. The

character

clear the entered symbols

insert the symbols

[

2. Enter the country code, area code, and phone

number, then press [ ].

OK>.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

2. Scroll to the number you want and press [ ].

Ending a call

Close the phone or press [

Making a call from Phonebook

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Phonebook.ꢀp. 34

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Press <Accept> or [ ] to answer the call.

keys.ꢀp. 36

Tips for answering a call

You can quickly dial a number from the SIM card using

its location number assigned when stored.

•

When Anykey answer is active, you can press

any key, except for <Reject> and [ ].

p. 84

When Active flip is active, you can simply open

the phone. p. 84

Press <Reject> or [

1. In Idle mode, enter a location number and press

[ ].

ꢀ

•

2. Press [Left] or [Right] to scroll through other

numbers.

ꢀ

•

] to reject a call.

3. Press <Dial> or [ ] to dial the number you want.

Press and hold [ / ] to reject a call or mute the

Voice dialling

ringer, depending on the Volume key setting.

ꢀp. 84

You can dial a number stored in Phonebook by

speaking the associated name into the microphone.

ꢀp. 46

Call functions

Viewing missed calls

Options during a call

If you have missed calls, the screen displays how

many calls you have missed.

You can access a number of functions during a call.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the headset

Use the headset to make or answer calls, or to start

the voice dialling feature without holding the phone.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Connect the headset to the jack on the left side of the

phone. The button on the headset works as follows:

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

the button twice.

the button.

4. Press <Options> and select End held call to end

the button.

the call on hold.

start voice dialling

and hold the button.ꢀp. 46

5. To end the current call, press [

•

Speaker on

feature or switch back to Normal mode.

Switch to headset Switch to phone: switch the

call to a Bluetooth headset or hands-free car kit or

back to the phone.

/Normal: turn on the Speakerphone

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

activated the call waiting feature.

ꢀp. 88

1. Press [ ] to answer the call. The first call is

automatically put on hold.

•

Menu: access the phone's menu functions.

Voice on/Voice off: switch off the phone's

2. Press <Swap> to switch between the calls.

microphone so that the other person on the phone

cannot hear you, or switch it back on.

3. Press <Options> and select End held call to end

the call on hold.

•

Mute keys/Send keys: switch the key tones on

or off.

4. To end the current call, press [

Using the Speakerphone feature

Use your phone as a speaker phone to talk and listen

with the phone a short distance away.

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

•

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Press [

] and then <Yes> to activate the

Speakerphone feature. Press [

back to the earpiece.

] again to switch

Using In-call options

Press <Options> to access the following options

during a call:

•

Phonebook: access the contact list.

Menu functions

All menu options listed

End held call: disconnect the call currently on

hold.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

Call log (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, and the length of calls. You can

also check the cost of your calls, if your SIM card

supports this function.

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

Select one: select one of multi-party call

participants. You can then use the following

options:

To access this menu, press <Menu> in Idle mode and

select Call log

Private: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return to the

multi-party call.

Recent contacts (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call log

1. Press [Left] or [Right] to move to another call

type.

Remove: disconnect one multi-party call

participant.

2. Press [Up] or [Down] to scroll through the call list.

3. Press [

] to view the details of a call, or [ ] to

Received calls (Menu 1.4)

dial a number.

This menu displays the most recent calls you have

received.

Using call log options

While viewing call details, press <Options> to access

the following options:

Delete all (Menu 1.5)

Use this menu to delete all of the logs in each call

type.

•

Call: edit the number and dial it.

Add to Phonebook: save the number to

Phonebook.

1. Press [

] to select the call types to be cleared.

2. Press <Delete>.

•

Send: send an SMS or MMS message to the

selected number.

3. Press <Yes> to confirm the deletion.

Delete: delete the selected call log or all call logs.

Call time (Menu 1.6)

Missed calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the most recent calls you did not

answer.

•

Last call time: check the length of your last call.

Dialled calls (Menu 1.3)

Total dialled calls: check the total length of all

the calls you have dialled.

This menu displays the most recent calls you have

dialled.

•

Total received calls: check the total length of all

the calls you have received.

Menu functions

To reset the call timers, press <Reset>. You need to

enter the phone password.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

The password is preset to 00000000. You can

change this password.ꢀp. 93

Call costs (Menu 1.7)

To access this menu, press <Menu> in Idle mode and

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Last call cost: check the cost of your last call.

Finding a contact

1. Enter the first few letters of the name that you

want to find.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max. cost, you must reset the counter before

you can make another call.

2. Select the name from the list.

•

Max. cost: check the maximum cost limit set in

3. Scroll to a number and press [ ] to dial, or press

Set max. cost

[

] to edit contact information.

•

Reset counters: reset the cost counters.

Using Phonebook options

Set max. cost: set the maximum cost authorised

for your calls.

While viewing contact details, press <Options> to

access the following options:

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

•

Edit: edit contact information.

•

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the number to a caller group.

Note: add a memo about the person.

•

Copy to: copy the contact to the phone’s memory

or to the SIM card.

3. Press <Save> to save the contact.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Storing a number on the SIM card

1. Select SIM

Delete: delete the selected contact.

2. Enter information about the contact.

Create contact (Menu 2.2)

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Use this menu to add a new contact to Phonebook.

Storing a number in the phone’s memory

To assign a caller ID image or video, ringtone, or

group, the contact must be saved to the phone’s

memory.

1. Select Phone

2. Change the settings or enter information about the

contact.

3. Press <Save> to save the contact.

•

First name

Mobile Home

number in any type.

Last name: assign a name.

/Office Fax Other: add a

Group (Menu 2.3)

Use this menu to organise your contacts in caller

groups.

•

Email: assign an e-mail address.

Caller ID: assign an image or a video to alert

you to a call from the person.

Menu functions

•

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

Creating a caller group

1. Press <Options> and select Create group

Delete: delete the selected group or all groups.

Group members, however, will not be deleted from

Phonebook.

2. Enter a name for the group.

3. Select the caller ID line and set an image or a

video.

4. Select the ringtone line and set a melody.

Speed dial (Menu 2.4)

5. Press <Save> to save the group.

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Adding members to a caller group

1. Select a group.

Assigning speed dial numbers

1. Select a key location from

for your voicemail server.

2. Press <Add>.

9. Key

is reserved

3. Press [

] to select the contacts to be added.

4. Press <Select>.

2. Select a contact from the contact list.

3. Select a number, if the contact has more than one

number.

Managing caller groups

While viewing the group list, press <Options> to

access the following options:

Managing speed dial entries

•

View: display the members of the selected group.

Create group: add a new group.

From the Speed dial screen, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

Edit: change the group properties.

•

View: check the name and number assigned to a

key.

•

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

•

Change: assign a different number to a key.

Exchange namecard: exchange name cards with

another person via Bluetooth.

Remove: clear the speed dial setting for a key.

Delete: delete the name card.

Dialling speed dial numbers

Own number (Menu 2.6)

In Idle mode, press and hold the appropriate key.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

My namecard (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Saving your name card

Management (Menu 2.7)

The procedure for creating your name card is the

same as the one for saving a phone number in the

Use this menu to manage Phonebook entries.

•

Save new contact to: select a default memory

location for saving contacts. If you select Always

ask, the phone will ask you to select a memory

location each time you save a number.

phone’s memory.ꢀp. 35

Using name card options

After saving your name card, press <Options> to

access the following options:

•

Copy all to: copy all of the contacts stored on the

SIM card to the phone’s memory, or vice versa.

•

Edit: edit the name card.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Menu functions

•

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

Music player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

music files into your phone’s memory or on a memory

card. You can play MP3, AAC, and M4A files from the

phone’s memory, and MP3 files from the memory card.

Service number (Menu 2.8)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

To enjoy high quality music, you can use an optional

Bluetooth stereo headset.

Normal headsets and Bluetooth mono headsets are

not compatible with the music player.

1. Scroll to the number you want and press <View>.

Downloading or receiving music files

2. Press <Dial> or [ ].

Use these methods to save music files to your phone’s

memory:

•

Download from the wireless web

ꢀp. 49

Applications (Menu 3)

Download from a computer using the optional

Use this menu to play music files, play Java games, or

edit photos. You can also use convenient features,

such as a voice command, voice recorder, alarm clock,

calculator, converter, and stopwatch.

Samsung PC Studio

Guide

ꢀSamsung PC Studio User’s

•

Via an active Bluetooth connection

Copy to a memory card and insert the card into the

phone p. 24

The downloaded or received files are stored in the

Music folder. p. 69

ꢀp. 92

•

To access this menu, press <Menu> in Idle mode and

ꢀ

select Applications

ꢀ

Creating a play list

1. From the music player screen, press <Options

Key

Function

Right

Skips to the next file.

Opens the play list.

and select Add music from

card

2. Press [

press <Select>.

→

Phone or Memory

] to select the files to be added and

Down

Stops playback.

Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

Changes the repeat mode.

Changes the equaliser mode.

Changes the skin type.

Turns Shuffle mode on or off.

3. Press <Back> to return to the music player

screen.

Playing music files

1. From the music player screen, press <Options

and select Play via

2. Select Phone to use the phone speaker.

Select Bluetooth stereo headset to use a

Bluetooth headset, and then search for and

connect the phone to the headset.

Using music player options

During playback, use the following keys:

From the music player screen, press <Options> to

access the following options:

Key

Function

Pauses or resumes playback.

Returns to the previous file.

•

Play via/Pause: begin or pause playback.

Left

Menu functions

•

Transfer to Bluetooth stereo headset

Transfer to phone: switch the sound output to a

Bluetooth headset or the phone speaker.

Equaliser: select an equaliser setting.

3D sound: turn 3D sound on or off.

Visualisation: change the playback animation.

Skin: select a skin type.

•

Open: access the play list of the current album or

album list. On the album list, you can set up

multiple albums.

Volume: select a volume level.

•

Details: access the file properties.

•

Go to Music: access the Music folder.

Key management: manage the licence keys you

have acquired.

Send via: send the file via e-mail or Bluetooth.

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Accessing the play list

•

Activate key: get a licence key when the key for

the selected DRM files expires.

From the music player screen, press [Up].

Press <Options> to access the following options:

Remove from playlist: remove the selected file

from the play list.

•

Play via: play the currently selected file.

Add music from: add files to the play list.

Go to album list: access the album list.

Settings: change the default settings for playing

music files.

Move to: move the selected file to another album.

Copy to: copy the selected file to another album.

Repeat mode: select a repeat mode.

Shuffle: set the music player to play music at

random.

Move track in playlist: move the selected file to

the position you want within the play list.

Music overrides other sounds: set the music

player to continue playback even if you exit it.

•

Activate key: get a new licence key when the key

for the selected DRM file expires.

Playing a voice memo

1. From the Voice recorder screen, press <Options

Remove: remove the selected file or all files from

the play list.

and select Go to My voice clips.

2. Select a voice memo.

•

Details: access the file properties.

During playback, use the following keys:

Key management: manage the licence keys you

have acquired.

Key

Function

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Stops playback.

Voice recorder (Menu 3.2)

Left

Right

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Recording a voice memo

Down

1. Press [

] to start recording.

2. Speak into the microphone.

Changing the recording mode

Press [

] to pause or resume recording.

You can change the recording mode of the voice

recorder. The maximum recording time is determined

by this setting. Before recording a memo, press

3. Press <Stop> or [Down] to end recording. The

voice memo is saved automatically.

4. Press [

] to review the voice memo, or [Up] to

<Options> and select Settings

→

a recording mode:

record a new memo.

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

Menu functions

•

Limit for email: record a voice memo for adding

to an e-mail.

2. Press <Options> and select Transform

→

option:

•

Maximum 1 hour: record a voice memo of up to

one hour.

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

Image editor (Menu 3.3)

3. Press <Done>.

Use this menu to edit your photos using various

editing tools.

4. Press <Options> and select Save as

5. Enter a new file name and press <OK>.

Applying an effect

Cropping

1. Select a photo or take a new photo.

1. Press <Options> and select New image

or Take photo

→

Open

2. Press <Options> and select Crop

2. Select a photo or take a new photo.

3. Move the cropping frame to the area of the image

you want.

3. Press <Options> and select Effects

→

an effect

option.

Press <Options> and select Resize to change the

frame size.

4. Press <Done>.

5. Press <Options> and select Save as

4. Press <Options> and select Done

5. Press <Options> and select Save as

6. Enter a new file name and press <OK>.

Transforming

1. Select a photo or take a new photo.

3. Press <Options> and select Add image

Adding visual features

4. Add a photo by selecting or taking a photo. The

You can decorate photos by adding a frame, an image,

or a note.

added photo appears in the box next to

will be the stamp.

. This

1. Select a photo or take a new photo.

5. Press <Options> and select Merge. The stamp

photo is added to the background photo as an

outline.

2. Press <Options> and select Insert

→

a feature

type.

3. Select an item or enter text to be inserted.

6. Press <Options> to access the following stamp

4. Adjust the position of the inserted item and press

edit options:

<Done>.

•

Resize: change the stamp size.

Move: change the position of the stamp.

Rotate: rotate the stamp.

Stamp colour: change the stamp colour.

Shadow on: apply a shadow to the stamp.

5. Press <Options> and select Save as

6. Enter a new file name and press <OK>.

Merging a stamp effect

This editing tool allows you to make an outline stamp

of a photo and then merge it with another photo. You

can use this tool to create your own photo postcard by

taking a photo of a handwritten message and merging

it with a photo.

7. When you have finished, press <Options> and

select Done

8. Press <Options> and select Save as

9. Enter a new file name and press <OK>.

1. Select a photo or take a new photo.

2. Press <Options> and select Merge stamp. The

background photo appears in the box next to

Menu functions

•

Upgrade: upgrade the application to the latest

version.

Java world (Menu 3.4)

Use this menu to access the embedded Java games

and downloaded Java applications.

Send information via Text message: send the

URL containing the application via SMS.

Accessing an embedded game

Memory status: access memory information for

applications.

1. Select My games

→

a game.

2. If necessary, press [

Settings: select a connection profile to be used for

applications requiring network access. You can also

Using Java application options

create or edit a profile.ꢀp. 93

From the application list, press <Options> to access

the following options:

World clock (Menu 3.5)

•

Start: launch the selected application.

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Move to: move the application to another folder.

Delete: delete the selected application or all

applications, except for the embedded games.

Viewing world time

1. From the world map, press [Left] or [Right] to

scroll to the city you want. As the time line moves,

the time and date of the given zone display.

•

Lock/Unlock: lock the application to protect it

from being deleted, or unlock the application.

•

Details: access the application properties.

2. Press [

zone.

] to save the city as your local time

Permissions: set permission settings for services

charging you additional costs, such as network

access and SMS.

Applying daylight savings time

Stopping an alarm

1. From the world map, press <Options> and select

•

For a non-wake-up alarm, press any key.

For a wake-up alarm, press <Confirm> or [

Press any key, except <Confirm> and [

Apply daylight saving time

], to

2. Press [ ] to select the time zones you want.

3. Press <Save>.

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Alarm (Menu 3.6)

Setting the alarm to ring even if the phone is

off

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

From the Alarm screen, select Auto power-up

→

On.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press <Save>.

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

Voice commands (Menu 3.7)

•

AM/PM: select AM or PM in 12-hour format.

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

Your phone provides a set of powerful voice-enabled

features that enhance its hands-free capabilities.

3. Press <Save>.

Menu functions

Your phone recognises only English, French,

German, Italian, Spanish, and Russian.

You can quickly access this menu by pressing and

holding the right soft key in Idle mode.

The procedures for name searching are the same as

for name dialling.

Name dial (Menu 3.7.1)

Use this menu to make a phone call by saying any

name in Phonebook.

Direct menu (Menu 3.7.3)

1. At the voice prompt, say a name.

Use this menu to access the primary menus, such as

Phonebook and Camera, as well as the Name dial and

Name search menus, directly, by saying the name of

the menu.

Speak into the microphone for best results.

The phone recognises your voice command and

displays the search results.

You can quickly access this menu by pressing and

holding the left soft key in Idle mode.

2. If the phone displays 3 possible results, say “Next”

following the voice prompt until you hear the name

you want.

The procedures for opening menus are the same as for

name dialling.

To go back to the name recited previously, say

“Previous.”

Settings (Menu 3.7.4)

3. Say nothing for 3 seconds or press [

] and the

Use this menu to customise various settings for the

voice commands feature.

phone will dial the currently selected number.

Name search (Menu 3.7.2)

•

Voice commands: enable or disable the voice

commands feature.

Use this menu to access a contact by saying any name

that is in Phonebook.

•

Command timeout: set a time limit for your

phone to wait for your voice command.

Calculator (Menu 3.8)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

Result display: set how many candidates the

phone displays for a voice command search.

Voice guides: turn on or off the voice messages

that guide you through the voice command

procedure.

1. Enter the first number.

•

Press <.()> to insert a decimal point or

bracket.

•

Guides volume: adjust the volume for the voice

guide messages.

•

Press

[

] or [ ] to move the cursor.

2. Press one of the Navigation keys to access the

math function you want.

Sensitivity level: adjust the sensitivity with

which your phone recognises a voice command.

3. Enter the second number.

Active contacts: select Phonebook entries to be

dialled or accessed by voice command.

4. Press [

] to view the result.

5. If necessary, repeat from step 2 to continue the

calculation.

Active menus: select menu items to be accessed

by voice command. Selecting a primary menu

displays the submenus which are assigned to the

selected primary menu.

Converter (Menu 3.9)

Use this menu for common conversions, such as

currency and temperature.

Help (Menu 3.7.5)

Use this menu to view instructions for the voice

commands feature and customising its settings.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Menu functions

3. Enter the value to be converted and press [Down].

Stopping the timer

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

•

Press any key when the timer rings.

Press [

] on the Timer screen to stop the timer

before it rings.

4. Press [Left] or [Right] to select the unit to which

you want to convert.

Stopwatch (Menu 3.11)

The equivalent value for the amount you entered

displays.

Use this menu to measure elapsed time. The

maximum time is 10 hours.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

1. Press [

] to start the stopwatch.

2. Press [

] to check an interval. You can repeat

this step for a total of 4 intervals.

Timer (Menu 3.10)

Key management (Menu 3.12)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

Use this menu to manage the licence keys you have

acquired to activate media contents locked by DRM

systems.

Starting the timer

1. Press <Set>.

Press <Options> to access the following options:

•

View: open the corresponding media content.

2. Enter the length of time you want to count down

Delete: delete the selected licence key.

and press <OK>.

Go to My Messages: access the message

containing the media content.

3. Press [

] to start counting down.

•

Go to My Items: access the corresponding file

folder.

Home (Menu 4.1)

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

Details: access the properties of the licence key.

provider. You can also press [

] in Idle mode.

SIM AT (Menu 3.13)

Navigating the web

This menu is available if you use a SIM AT card that

supports SIM Application Tool kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Press

[Up] or [Down].

scroll through browser

items

select a browser item

[

], or <Options> and

select Go to

return to the previous

page

Back>, or <Options

and select Go Back

→

Browser (Menu 4)

move to the next page

→

Options> and select Go

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

Forward

Using page options

From any web page, press <Options> to access the

To access this menu, press <Menu> in Idle mode and

following options:

select Browser

•

Go to: access the linked web page.

Menu functions

•

Go to homepage: return to the homepage.

Cache: change the cache mode or clear the cache.

The cache is a temporary memory that stores

recently accessed web pages.

•

Keys to buy: send a request for buying a licence

key for a DRM file. This option will be available only

when you access the web browser from a message

containing a DRM file.

Cookies: change the cookie acceptance mode or

delete cookies. Cookies are pieces of personal

information sent to a web server while navigating

the web.

•

Enter URL: enter a URL address manually.

Go: move backward or forward through pages in

history.

Preferences: change the browser display and

sound settings.

•

Reload: reload the current page with updated

information.

Certificates: access certificate information.

About browser: access version and copyright

information about the browser.

Bookmarks: bookmark the current page or access

the bookmark list.

Send URL: send the URL of the current page via

SMS or e-mail.

Exiting the browser

Press [

] to end the network connection and exit the

To DesktopView/To SmartFitView: change the

display mode of the browser.

browser.

•

Save: save the selected image or page.

Page details: access the page properties.

Enter URL (Menu 4.2)

Use this menu to manually enter a URL address and

access the associated web page.

Browser options: change the various settings for

the browser.

You can add the entered URL to the bookmark list by

selecting Add bookmark

•

Edit bookmark: edit the URL address and title of

the bookmark.

Bookmarks (Menu 4.3)

Use this menu to save URL addresses in order to

quickly access web pages.

•

Add bookmark: add a new bookmark.

Send URL: send the URL address of the bookmark

via SMS or e-mail.

Adding a bookmark

1. Press <Add>. If a bookmark has already been

•

Delete: delete the selected bookmark or all

bookmarks.

saved, press <Options> and select Add

bookmark

2. Enter a title for the bookmark and press [Down].

Saved pages (Menu 4.4)

3. Enter a URL address and press <Save>.

You can access the list of pages you have saved while

online.

Accessing a bookmarked page

If you select a link on the page, the phone switches to

online to access the linked page.

Selecting a bookmark item launches the web browser

and accesses the associated web page.

History (Menu 4.5)

Using bookmark options

You can access the list of pages you have accessed

recently.

After saving an item, press <Options> to access the

following options:

•

Go to: access the bookmarked web page.

Go to homepage: access the homepage.

Enter URL: enter a URL address manually.

Select a URL from the list to access the corresponding

web page.

Menu functions

Text message (Menu 5.1.1)

Clear cache (Menu 4.6)

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

Use this menu to clear information stored in the cache.

Browser settings (Menu 4.7)

1. Enter your message.

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also create or

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

edit a profile.ꢀp. 93

Messages (Menu 5)

2. Press <Options> to access the following options

for creating a message:

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message and cell broadcast

message features.

•

Save and send: save the message in Outbox

and then send it.

•

Send only: just send the message.

Insert: add a template, Phonebook entry, or

bookmark to text.

To access this menu, press <Menu> in Idle mode and

select Messages

•

Add image/Add animation/Add melody:

attach a simple image, an animated image, or

a melody.

Attach: attach a name card or calendar data

as a data format attachment.

Create message (Menu 5.1)

Use this menu to create and send messages.

•

Save in: save the message in another folder.

Input language: change the language to be

used in T9 input mode.

Text style: change the text attributes.

Input method: change the text input mode.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

4. Select the Message line.

5. Enter the message text and press [

6. Press <Options> to access the following options:

3. When you have finished, press <Options> and

select Save and send or Send only

4. Enter a destination number.

•

Edit: edit the subject or text.

Change image Change video

sound: replace an added item.

Add memory card: add a file stored on a

memory card, if inserted.

Preview: view the message as it will be shown

on the recipient’s phone.

Send: send the message.

To send the message to more than one recipient,

fill in additional destination fields.

/Change

5. Press [

] to send the message.

•

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

1. Select the Subject line.

Save in: save the message in another folder.

Add page: add pages. Move to each page by

pressing [Left] or [Right].

2. Enter the message subject and press [

3. Select the Image and video or Sound line and

•

Delete page: delete an added page.

add an image, a video, or a sound file.

Menu functions

•

Edit page: change the duration of page display

or move the page forward among the other

pages.

Attach: attach a Phonebook entry as a name

card or calendar data as a data format

attachment, or a document file stored in the

Other files folder.

2. Enter the subject of your e-mail and press [

3. Select the Message line.

4. Enter the e-mail text and press [

•

5. Select the File attached line and select one of the

following options to add files:

•

Add image/Add video/Add sound/Add

music: add media files stored in the phone’s

•

Remove subject

Remove media Remove sound

remove an added item.

7. When you have finished, press <Options> and

select Send

Remove message

memory.

/Remove:

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

Add other files: add document files stored in

the Other files folder.

Add from Memory card: add files stored on a

memory card, if inserted.

8. Enter a phone number or an e-mail address.

To send the message to more than one recipient,

fill in additional destination fields.

9. Press [

] to send the message.

•

Send: send the message.

Save in: save the message in another folder.

Attach: attach Phonebook entries as name

cards or calendar data as data format

attachments.

Email (Menu 5.1.3)

You can create and send e-mails that include text,

audio, and images.

1. Select the Subject line.

6. Press <Options> to access the following options

My messages (Menu 5.2)

for editing the e-mail:

Use this menu to access messages you have received,

sent, or which have failed in sending.

•

Edit: edit the subject or text.

View: open the selected attachment.

Inbox (Menu 5.2.1)

Remove subject/Remove message: clear

the subject or text.

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

This folder stores all of the messages you have

received, except for e-mails.

•

Viewing a message

The following icons may appear on the message list to

show the message type:

7. When you have finished, press <Options> and

select Send

•

SMS

MMS

8. Enter an e-mail address.

MMS notification ( : Being retrieved,

: Failed to retrieve)

To send the e-mail to more than one recipient, fill

in additional destination fields.

•

Voicemail

9. Press [

] to send the e-mail.

Push message from web servers or

Configuration message, containing network

parameters from your service provider

•

CB (Cell broadcast) message from your

service provider

Menu functions

•

Delivery report for your sent messages

•

Cut media: save media content from the message

to your phone’s memory.

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

• A

icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

•

Add to Block list: add the sender’s number to the

Block list to reject the messages from the sender.

Using message options

MMS messages/MMS notifications

While viewing a message, press <Options> to access

the following options:

•

Retrieve: retrieve the MMS message from the

MMS server.

SMS messages

Reply via text message: reply to the sender via

SMS.

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

Reply via multimedia message to: reply to the

sender via MMS.

•

Forward: forward the message to other people.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Delete: delete the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut media: save media content from the message

to your phone’s memory.

•

Protection: protect the message from being

deleted.

Broadcast messages

•

Save: save the message to the phone’s memory.

Details: access the message properties.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Configuration messages

•

Delete: delete the message.

•

Install: apply the configuration specified in the

message to your phone.

Delivery reports

•

Delete: delete the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the report.

Protection: protect the message from being

deleted.

•

Delete: delete the message.

Push messages

Protection: protect the report from being deleted.

•

Go to URL: connect to the URL specified in the

message.

Drafts (Menu 5.2.2)

This folder stores messages you have saved to send at

a later time.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

When you select a message, it opens in Edit mode so

that you can edit and send the message.

•

Delete: delete the message.

Protection: protect the message from being

deleted.

Menu functions

Outbox (Menu 5.2.3)

Sentbox (Menu 5.2.4)

This folder stores messages that the phone is

attempting to send or has failed to send.

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

The following icons are available to show the message

status:

the following options:

•

Forward: forward the message to other people.

•

Being sent

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Failed to send

•

Delete: delete the message.

While viewing a message, press <Options> to access

the following options:

Protection: protect the message from being

deleted.

•

Send again: retry sending the message.

•

Details: access the message properties.

Forward: forward the message to other people.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Email inbox (Menu 5.2.5)

This folder stores e-mails that you have received.

Viewing an e-mail

•

Delete: delete the message.

Protection: protect the message from being

deleted.

1. Select an e-mail account.

2. Press <Yes> when Check for new email

displays, or press <Options> and select Check

for new mail. The phone checks the e-mail server

and downloads new e-mails.

•

Details: access the message properties.

The following icons may appear on the list to show

the e-mail status:

•

Delete: delete the e-mail.

Add to filtering list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

•

Retrieved from the server

Being retrieved

Failed to retrieve

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

Cut media: save the attached files from the

e-mail to your phone’s memory.

3. Select an e-mail or a header.

•

Protection: protect the e-mail from being deleted.

4. Press [Left] or [Right] to view other pages in the

e-mail.

Details: access the e-mail properties.

5. Press [ ] or [ ] to view the previous or next

e-mail.

My folders (Menu 5.2.6)

Use this menu to create new folders and organise your

messages.

Using e-mail options

While viewing the e-mail or header, press <Options

to access the following options:

Creating a new folder

1. Press <Yes>.

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

2. Enter a folder name and press <OK>.

Using folder options

Reply: send a reply to the sender or all of the

other recipients.

On the folder list, press <Options> to access the

following options:

Forward: forward the e-mail to other people.

Menu functions

•

Open: open the selected folder.

•

Send message: create and send a new message.

Delete: delete the selected template.

Add new: add a new template.

•

Create folder: add a new folder.

Rename folder: change the folder name.

Delete: delete the selected folder.

Multimedia message templates (Menu 5.3.2)

You can access embedded MMS templates or ones you

have saved so that you can use them when composing

an MMS message.

Templates (Menu 5.3)

Use this menu to make and use templates of

frequently used messages.

From the template list, press <Options> to access

the following options:

Text message templates (Menu 5.3.1)

•

View: open the selected template.

Edit: edit the template.

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

Send message: create and send a new message.

Creating a template

Delete: delete the selected template or all

templates, except for the embedded ones.

1. Select an empty location.

2. Enter a message and press <OK>.

Using template options

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder all at once.

From the template list, press <Options> to access

the following options:

•

Edit: edit the selected template.

1. Press [

cleared.

] to select the message folders to be

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-Alphabet to Uni-Code

if you enter a Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half. If this menu

is not shown, your phone provides automatic

character encoding by default.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

2. Press <Delete>.

3. Press [

] to select the check box to delete

protected messages, and then press <Yes>.

4. Press <Yes> to confirm the deletion.

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

Settings (Menu 5.5)

•

Receiving options: activate 3D vivid view mode

for displaying received SMS messages on your

phone. The phone will convert message text to 3D

vivid graphics and displays it in 3D view mode.

This option is available only when the message

consists of a single page.

Use this menu to set up various options for using the

messaging service.

Text messages (Menu 5.5.1)

You can configure SMS settings.

•

Sending options: set up the options for sending

SMS messages:

•

Block list: store the phone numbers from which

you want to reject messages.

Send read receipt: allow recipients to reply to

you through your SMS server.

Current profile: check or select an SMS setting

profile.

Send delivery receipt: set the network to inform

you when your messages have been delivered.

Profile settings: set the properties of each

profile.

Menu functions

Service centre: store or change the number of

your SMS server.

Send read receipt: send a read-reply request

along with your messages.

Default destination: enter the default

destination. It will be displayed in the first field on

the Recipients field.

Priority: set the priority level of messages.

Expiry date: set the length of time messages are

stored in the MMS server.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Delivery time: set a time delay before messages

are sent.

Outgoing message size: select a maximum size

of attached items allowed for messages.

Default validity: set the length of time your

messages are stored in the SMS server.

•

Retrieving options: set up the options for

receiving MMS messages:

Setting name: enter a profile name.

Reject unknown senders: reject messages from

unknown senders.

Multimedia messages (Menu 5.5.2)

You can configure MMS settings.

Allow adverts: accept advertisements.

•

Sending options: set up the options for sending

MMS messages:

Allow information: accept information

messages.

Send delivery receipt: set the network to inform

you when your messages have been delivered.

Allow reports: set the network to inform the

sender when a message has been delivered to you.

Hide address: set your address to be hidden from

the recipient’s phone.

Recep. in home network: determine if your

phone retrieves new messages automatically when

you are in your service area.

Reception when abroad: determine if your

phone retrieves new messages automatically when

you are roaming on another network.

Keep a copy: send a copy of your e-mails to your

e-mail account.

Send delivery receipt: set the network to inform

Reception within home network or abroad has the

following options:

you when your e-mails have been delivered.

Send read receipt: send a read-reply request

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

along with e-mails.

Reply-To address: set an e-mail address to

receive read-reply messages from recipients.

Automatic: the phone automatically retrieves

messages from the server.

Priority: select the priority level of e-mails.

Add signature: attach your name, phone number,

a simple memo, or a tag line to your e-mails.

Reject: the phone rejects all messages.

•

Multimedia message Profiles: select a

connection profile to be used for MMS. You can also

Edit name: edit the name in your signature.

Edit number: edit the phone number in your

signature.

create or edit a profile.ꢀp. 93

Edit note: edit the tag line in your signature.

Emails (Menu 5.5.3)

•

Receiving options: set up the options for

receiving e-mails:

You can configure default e-mail settings.

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Do not notify, use the Check for new

email option to receive new e-mails manually.

•

Sending options: set up the options for sending

e-mails:

Menu functions

Send read receipt: determine whether or not the

phone sends a read-reply for incoming e-mails. If

you select Reply reminder, the phone asks you to

send a read-reply.

User name: enter a user name.

Email address: enter your e-mail address.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

Download limit: determine the maximum size for

incoming e-mails. Your phone will reject e-mails

that exceed the specified size.

SMTP port: enter the SMTP port number.

Connect to POP3(IMAP4) server first:

connect to the POP3 or IMAP4 server before

connecting to the SMTP server to send e-mails.

Download method: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Keep in server: leave copies of e-mails on the e-

mail server after retrieving.

When the protocol type is POP3

•

Block list: specify e-mail addresses or subjects

you want to reject.

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter the POP3 user name.

Password: enter the POP3 password.

•

Email accounts: set up an e-mail account and

select an account to be used.

Current account: check or select an account.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Account name: enter a name for the currently

selected account.

Same as POP3: select if you want the SMTP

server to have the same parameters as the POP3

server.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Include attachments: select this option to

receive attachments with e-mails.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Email retrieval limit(1-100): set the number

of headers you will retrieve from the server.

APOP login: connect to the server by using the

APOP login scheme.

Secure connection: use a secured connection

Secure connection: use a secure connection for

the e-mail service.

for e-mail service.

•

Email profile: select a connection profile to be

When the protocol type is IMAP4

used for e-mail services. You can also create or

edit a profile.

ꢀp. 93

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter the IMAP4 user name.

Password: enter the IMAP4 password.

Push messages (Menu 5.5.4)

You can change the settings for receiving push

messages from the wireless web server.

•

Receive: set how your phone receives push

messages. If you select Black list, the phone will

not accept messages from the specified addresses

on the Black list.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Same as IMAP4: select if you want the SMTP

server to have the same parameters as the

IMAP4 server.

•

Black list: manage blocked server addresses.

Menu functions

Broadcast messages (Menu 5.5.5)

Tips for Digital Rights Management

You can change the settings for receiving broadcast

messages.

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a licence

key to access them.

•

Receive: select to receive broadcast messages, or

not.

You can acquire the key from the website which owns

the rights to the content; use the Activate key

option.

•

Channel list: indicate the channels from which

you wish to receive broadcast messages. Please

contact your service provider for further details.

•

Language: select the preferred languages in

which broadcast messages display.

Note the following icons on the list:

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

Memory status (Menu 5.6)

Use this menu to view the amount of memory

currently in use in each message folder.

Your service provider supports only count-based or

unlimited-access DRM files.

My Files (Menu 6)

The My Files menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory or on a memory card.

Images (Menu 6.1)

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from a computer.

To access this menu, press <Menu> in Idle mode and

select My Files

•

Activate key: get a new licence key when the key

for the selected DRM file expires.

Viewing an image

1. Select an image folder.

2. Select an image.

Edit: edit the image using the Image editor if it is

a photo taken by the camera on the phone.

Viewing a slide show

ꢀp. 42

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

•

Delete: delete the file.

Rename: change the file name.

1. Select My photos

Move to: move the file to another folder or to a

2. Press <Options> and select Slide show

memory card.

3. Select an interval option.

The slide show begins.

•

Copy to memory card: copy the file to a memory

card.

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

4. Press <Stop> to stop the slide show.

Using image options

•

Protection: protect the file from being deleted.

While viewing an image, press <Options> to access

the following options:

Print via Bluetooth: print the file by connecting

the phone to a printer via Bluetooth. Some printers

may not be compatible with the phone.

•

List: return to the image list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Details: access the file properties.

Key management: manage the licence keys you

•

Set as: set the image as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

have acquired.

Menu functions

Viewing an image on a TV

• Depending on the video’s system, the image

vibrates or in some other may be less than

optimal.

• Depending on the video quality, some video

files may not display.

You can use a TV to view the images you have stored.

You first need to set the video system for your TV in

the TV-out settings menu.ꢀp. 85

1. With the TV switched on, connect your phone to

the TV with the TV out cable, as shown.

Videos (Menu 6.2)

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

a computer.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

• Depending on your particular TV model, the

location and shape of the video input and

audio output ports may vary. Match cable

connector and TV port colours.

During playback, use the following keys:

• Do not plug in connectors with a wet hand.

Key

Function

2. Switch the TV to External Input mode.

Pauses or resumes playback.

The display switches to TV Out mode and you can

view the phone’s display on the TV screen.

Left

Returns to the previous file. Moves

backward in a file when held down.

3. Select a photo in the My photos folder.

•

Move to: move the file to another folder or to a

memory card.

Key

Function

Right

Skips to the next file. Moves forward

in a file when held down.

Copy to memory card: copy the file to a memory

card.

Adjusts the volume.

Stops playback.

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Down

•

Protection: protect the file from being deleted.

Details: access the file properties.

Using video options

Key management: manage the licence keys you

have acquired.

After playback, press <Options> to access the

following options:

•

List: return to the video list.

Viewing a video clip on a TV

Send via: send the file via MMS, e-mail, or

Bluetooth.

You can use a TV to view the video clips you have

stored.ꢀp. 68

•

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the main display or as a caller ID

image for a Phonebook entry.

Music (Menu 6.3)

This menu displays MP3 files you have downloaded or

imported from a computer.

Activate key: get a licence key when the key for

the selected DRM file expires.

Select a file. The MP3 player opens.

ꢀp. 39

•

Delete: delete the file.

When you play a file from this menu, without first

adding it to the play list in the MP3 player,

background play is not supported.

Rename: change the file name.

Menu functions

•

Rename: change the file name.

Sounds (Menu 6.4)

Move to: move the file to another folder or to a

memory card.

This menu displays voice memos you have recorded,

and sound files you have downloaded, received in

messages, or imported from a computer.

•

Copy to memory card: copy the file to a memory

card.

Playing a sound clip

1. Select a sound folder.

Bluetooth visibility: share the files with other

Bluetooth devices.

2. Select a sound clip. For a voice memo, see Voice

•

Protection: protect the file from being deleted.

recorder.ꢀp. 41

Details: access the file properties.

Using sound options

Key management: manage the licence keys you

have acquired.

From a sound screen, press <Options> to access the

following options:

Other files (Menu 6.5)

•

List: return to the sound list.

Use this menu to view various document files and files

stored in the phone’s memory without corruption.

Available file formats are DOC, XLS, PPT, PDF, and TXT.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Viewing a file

Activate key: get a new licence key when the key

for the selected DRM file expires.

Select a file. Picsel File Viewer runs to open the

document.

Delete: delete the file.

• Depending on the file size or memory capacity of

Picsel File Viewer, some files may not open

properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content of

the document will not display correctly.

Key

Function

Changes the display to Full screen

view or Normal screen view.

Using document options

While viewing a document, press <Options> to

access the following options:

Use the following keys to view the document:

Key

Function

•

Full screen view/Normal view: change the view

mode.

Up/Down/

Left/Right

Pans around the page.

•

Zoom: zoom in or out.

Fits the document to the page size.

Zooms in.

Fit to: fit the document to the page size, screen

width, or screen height.

•

Go to: move to another page of the document.

Returns to the first page.

Zooms out.

Rotate: rotate the document.

Screen panning

panning mode to by screen or by preset pixel.

Show controller Hide controller: show or hide

/Normal panning: change the

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

•

the shortcut tool bar in Full screen view.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Menu functions

•

Move to memory card: move the file to a

memory card.

Memory status (Menu 6.7)

Use this menu to view memory information for media

items in the phone’s memory or on a memory card.

For the phone’s memory, press [Left] or [Right] to

view the memory status by size or number of items.

•

Copy to memory card: copy the file to a memory

card.

•

Delete: delete the selected file.

Rename: change the file name.

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

•

Protection: protect the file from being deleted.

Details: access the file properties.

To access this menu, press <Menu> in Idle mode and

Shortcuts: view the functions of the keys you can

use in Picsel File Viewer.

select Calendar

Consulting the calendar

Memory card (Menu 6.6)

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Use this menu to access the files stored in a memory

card. This menu is shown only when a memory card is

inserted into the phone.

Your phone is preset to use FAT16-formatted

memory cards. If you insert a FAT32-formatted

memory card, the phone will ask you to reformat the

memory card. If you do not, you will not be able to

access the card from the phone.

Selecting a day

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [ / ] to move by month.

Using calendar options

Entering an appointment

1. Select a date on the calendar.

Press <Options> to access the following options:

2. Press <Options> and select Create

→

•

View by: change the view mode of the

calendar. p. 75

Create: add a new item.ꢀnext section

Appointment

ꢀ

3. Enter information or change the settings:

•

Subject: enter a title for the appointment.

Details: enter appointment details.

Start date and Start time: enter the starting

date and time for the item.

Go to: enter the specific date you want to access.

Event list: sort items by type of item.

Delete: delete the items stored on the calendar by

using various deleting options.

•

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the appointment.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the

appointment location.

You can delete recurring items in Day view only.

•

Missed alarm events: view items whose alarms

you have missed.

Memory status: access memory information for

the items stored on the calendar.

Creating an item

•

Alarm: set an alarm for the appointment.

Before: set how long before the appointment

the alarm is to alert you.

You can store appointments, anniversaries, memos,

and tasks on the calendar. More than one item per day

can be stored.

•

Alarm tone: select an alarm tone.

Menu functions

•

Repeat: set the appointment to recur and

select a repeat option.

Until: set the ending date, if the appointment

will recur.

•

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

•

4. Press <Save> to save the anniversary.

4. Press <Save> to save the appointment.

Entering a memo

1. Select a date on the calendar.

Entering an anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

→

Memo.

2. Press <Options> and select Create

Anniversary

3. Enter information or change the settings:

→

3. Enter a memo and press <Save>.

Entering a task

1. Select a date on the calendar.

2. Press <Options> and select Create

•

Occasion: enter information about the

anniversary.

→

Task

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

3. Enter information or change the settings:

•

Task: enter information about the task.

Start date: enter the starting date.

Due date: enter the ending date.

Select priority: select a priority level.

•

4. Press <Save> to save the task.

AM/PM: select AM or PM in 12-hour time

format.

•

View by: change the view mode of the calendar.

Viewing an item

Delete: delete the item.

Once you have scheduled items, the item icons and

the number of items for a specific day appears at the

bottom of the calendar.

Memory status: access memory information for

the items stored on the calendar.

•

Appointment

Task

•

Anniversary

Memo

Viewing items in a different mode

You can change the calendar display to Day view or

Week view. Press <Options> and select View by

view mode.

→

Accessing an item

1. Select a date on the calendar to display the items

for the day.

Day view

You can view items for the selected date. Select an

event to view its details.

2. Select an event to view its details.

3. Press [Left] or [Right] to access the other items

scheduled for the selected day.

The following icons may display to indicate the item

status:

Using item options

•

Alarm set

While viewing an item, press <Options> to access

the following options:

Recurring item

Task priority (Red: high, Blue: normal, Grey:

low)

•

Edit: edit the item.

Create: add a new item.

•

Completed task

Send via: send the item via SMS, MMS, e-mail, or

Bluetooth.

Menu functions

Week view

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

You can view items for the selected week. A cell on the

timetable indicates the presence of a schedule item.

Select a cell in the day you want.

1. Access the Camera menu or press and hold [

]

to turn on the camera.

2. Make any desired adjustments.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 78

3. Press [ ] or [ to take a photo. The photo is

saved in the My photos folder.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

ꢀ

•

ꢀ

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

]

in Idle mode.

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

4. To Press

access photo options Options>.

ꢀp. 79

• Do not take photos in a place where you may

interfere with another person’s privacy.

delete the photo

[

] and then <Yes>.

return to Capture mode

Preview>.

Taking a photo

Using camera options in Capture mode

You can take photos in various modes. The camera

produces JPEG photos.

In Capture mode, press < > to access the following

options:

•

Record video: switch to Record mode.

Size: select an image size.

Shooting mode: take a photo in the following

modes:

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Shutter sound: select the sound that you hear

Single shot: take a photo in normal mode. You

can select whether or not the camera automatically

saves a photo.

when you press the shutter release, [

Zoom sound: turn the sound effect for zooming

on or off.

Multi-shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Mosaic shot: take several stills and save them in

one frame. You can select the layout.

White balance: adjust the colour balance of the

image. You can make your photo appear warmer

or cooler.

•

Effects: change the colour tone or apply a special

effect.

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

select a higher ISO number. The higher the ISO

number, the faster the camera shutter functions

and the more sensitive the camera is to light.

Higher ISO settings may bring some distortion to

an image.

•

Frames: apply a decorative frame.

Flash: determine the use of the flash.

Timer: set a time delay before the camera takes a

photo.

•

Go to My photos: access the My photos folder.

Settings: change the default settings for taking a

photo.

•

Camera shortcuts: view the functions of the keys

you can use in Capture mode.

Menu functions

Using the keypad in Capture mode

Key

Function

You can use the keypad to customise your camera

settings in Capture mode.

Goes to the My photos folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Key

Function

Left/Right

Up/Down

Adjusts the brightness.

Zooms in or out.

Using voice commands in Capture mode

Flips the image vertically.

Shows the mirror image.

Switches to Record mode.

Changes the image size.

You can use voice commands to customise your

camera settings in Capture mode.

ꢀp. 80

Your phone recognises only English, French,

German, Italian, Spanish, and Russian.

Changes the image quality.

Changes the shooting mode.

1. In Capture mode, press [

recognition feature.

] to activate the voice

2. After the voice prompt, say the following voice

commands for camera settings:

Changes the colour tone or applies a

special effect.

Say

Changes the ISO setting.

Selects a decorative frame.

Sets the timer.

zoom in or out

Zoom in, Zoom in max, Zoom

out, or Zoom out max.

For example:

Say

•

To zoom in, say “Zoom in.”

apply a special

effect

Gray scale, Negative, Sepia,

Antique, Moonlight, Fog, or

Effect none.

To increase the image size, say “Size up.”

To turn the flash off, say “Flash off.”

use the flash

set the timer

Flash shooting only, Flash

permanent, or Flash off.

Using photo options

After saving a photo, press <Options> to access the

following options:

Timer three seconds, Timer

five seconds, Timer ten

seconds, or Timer off.

•

View: access one of the multi-shot photos.

Viewfinder: return to Capture mode.

change the image

size

Size up or Size down.

Send via: send the file via MMS, e-mail, or

Bluetooth.

change the image

quality

Quality normal, Quality

economy, Quality fine, or

Quality super fine.

•

Set as: set the photo as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

Edit: edit the photo using the Image editor.

ꢀ

p. 42

change the preview

screen

Full screen, Standard ratio,

Full screen guideline, or Full

screen indicator.

•

Delete: delete the file.

Rename: change the file name.

Go to My photos: access the My photos folder.

ꢀp. 66

Menu functions

•

Protection: protect the file from being deleted.

Recording a video

•

Print via Bluetooth: print the file by connecting

the phone to a printer via Bluetooth. Some printers

may not be compatible with the phone.

You can record a video of what is displayed on the

camera screen and save it.

1. In Capture mode, press [

1].

•

Details: access the file properties.

2. Make any desired adjustments.

Taking a photo with the phone closed

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 81

to start recording.

], < >, or [ to stop recording. The

ꢀ

1. Press and hold [

2. To

Press

[ ].

ꢀ

3. Press [

4. Press [

]or [

]

switch to Record mode

zoom in or out

]

[ ] until

appears

video is automatically saved in the My video clips

folder.

and then [ ].

adjust the brightness

turn the flash on or off

[ ] until

and then [ ].

appears

5. To

Press

play back the video clip

access video options

delete the video clip

return to Record mode

[

Options>.

and hold [ / ].

ꢀp. 82

3. Press [

]

to take a photo. The photo is

[C] and then <Yes>.

automatically saved.

<Preview>.

Size: select a frame size.

Using camera options in Record mode

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Record audio: record audio with a video clip.

In Record mode, press < > to access the following

options:

•

Take photo: switch to Capture mode.

Effects: change the colour tone or apply a special

effect.

Zoom sound: turn the sound effect for zooming

on or off.

•

Flash: determine the use of the flash.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Timer: set a time delay before the camera starts

recording.

White balance: adjust the colour balance of the

image. You can make your video appear warmer or

cooler.

•

Go to My video clips: access the My video clips

folder.

•

Camcorder shortcuts: view the functions of the

keys you can use in Record mode.

Settings: change the following settings for

recording a video:

Recording mode: select a video recording mode.

Using the keypad in Record mode

Select Limit for multimedia messages/

wallpaper to record a video suitable for

messaging or for setting as wallpaper or caller ID

image. The video clip is saved in 3GP format.

You can use the keypad to customise your camera

settings in Record mode.

Key

Function

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

Left/Right

Up/Down

Adjusts the brightness.

Zooms in or out.

Menu functions

Using video options

Key

Function

After saving a video clip, press <Options> to access

the following options:

Flips the image vertically.

Shows the mirror image.

Switches to Capture mode.

Changes the frame size.

•

Viewfinder: return to Record mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

ꢀp. 76

•

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the main display or as a caller ID

image for a Phonebook entry.

Changes the image quality.

Changes the video recording mode.

•

Delete: delete the file.

Changes the colour tone or applies a

special effect.

Rename: change the file name.

Go to My video clips: access the My video clips

Mutes or unmutes audio.

Sets the timer.

folder.

ꢀp. 68

•

Protection: protect the file from being deleted.

Details: access the file properties.

Goes to the My video clips folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Recording a video with the phone closed

1. Press and hold [

2. Press [ ] to switch to Record mode.

Time and date (Menu 9.1)

3. To

Press

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World clock menu.

switch to Capture mode [ ].

zoom in or out

[ ] until

appears and

then [ ].

ꢀp. 44

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Date format: select a date format.

adjust the brightness

turn the flash on or off

[ ] until

then [ ].

•

and hold [ / ].

•

4. Press [

5. Press [

]

to start recording.

•

to stop recording. The video is

•

Calendar starting day: set which day of the

week the calendar starts with.

automatically saved.

Phone settings (Menu 9.2)

Settings (Menu 9)

Many different features of your phone’s system can be

customised to suit your preferences.

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Some menus may not be available, depending on

your service provider.

To access this menu, press <Menu> in Idle mode and

select Settings

Menu functions

•

Remove all: deactivate all shortcut assignments.

Language (Menu 9.2.1)

Use this menu to select one of several languages for

the display text.

Volume key (Menu 9.2.4)

Use this menu to set whether the phone mutes the call

ringer or rejects a call if you press and hold [ / ]

when a call comes in.

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Extra settings (Menu 9.2.5)

You can turn the automatic redialling or answering

feature on or off.

Shortcuts (Menu 9.2.3)

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Assigning a shortcut menu

•

Active flip: answer an incoming call by opening

the phone.

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

Using shortcut options

Anykey answer: answer an incoming call by

pressing any key, except for <Reject> and [

Press <Options> to access the following options:

Display settings (Menu 9.3)

•

Change: assign or change a shortcut menu.

Use this menu to change settings for the display and

backlight.

Remove: deactivate the shortcut assignment to

the selected key.

Wallpaper (Menu 9.3.1)

Brightness (Menu 9.3.4)

You can set up the idle screen on both displays.

You can adjust the brightness of the display for

varying lighting conditions.

•

Main display: select an image or video clip to be

displayed on the main display.

Dialling display (Menu 9.3.5)

Cover display: select an image to be displayed on

the external display.

Use this menu to select a font colour for the numbers

entered while dialling.

Text position: select a text position. If you don’t

want to display text in Idle mode, select Off

Show caller information (Menu 9.3.6)

•

Text mode: select a font style.

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information. To set the external display to show caller

Text colour: select a font colour.

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in a message.

information, select Also on cover display

TV-out settings (Menu 9.3.7)

Use this menu to select the video system for a TV.

Main menu style (Menu 9.3.2)

Sound settings (Menu 9.4)

You can select a display style for the main menu

screen.

Use this menu to customise various sound settings.

Skin (Menu 9.3.3)

Incoming call (Menu 9.4.1)

You can select a skin colour pattern for Menu mode.

Use this menu to change the sound settings for

incoming calls.

Menu functions

•

Ringtone: select a ringtone to be used for the call

ringer.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Volume: select a ringtone volume.

Alert type: specify how you are to be informed of

incoming calls.

Flip tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Keypad tone (Menu 9.4.2)

Use this menu to select the tone that the phone

sounds when you press a key.

Quiet mode (Menu 9.4.6)

Use this menu to set how the phone acts to alert you

to a specific event while in Quiet mode.

You can adjust the keypad tone volume using

[

/ ] in Idle mode.

Extra tones (Menu 9.4.7)

Message tone (Menu 9.4.3)

Use this menu to customise additional tones for the

phone.

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages individually.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed

when a message comes in.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

•

Repetition: specify how often the phone informs

you of a new message.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Indicative tone: set the phone to beep when a

pop-up window displays.

•

Any time: the keypad light is always used.

Night time: the keypad light is used only between

5:00 PM and 9:00 AM.

Light settings (Menu 9.5)

•

Custom time: specify the time period that the

keypad light is used.

Use this menu to change settings for the light.

Backlight time (Menu 9.5.1)

Network services (Menu 9.6)

You can select the length of time the backlight stays

on or the length of time the display stays on in Dim

mode, in which the backlight is off.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Main display normal: select the length of time

the backlight stays on.

Call diverting (Menu 9.6.1)

•

Main display dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

This network service reroutes incoming calls to a

phone number that you specify.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Show cover indicators: set whether or not the

cover display icons are shown on the external

display.

•

No reply: divert calls when you do not answer

the phone.

Keypad light (Menu 9.5.2)

Use this menu to set how the phone controls the use

of the keypad light.

Menu functions

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

•

All incoming calls: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

service area.

•

Cancel all: cancel all call diverting options.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

2. Select the type of calls to be barred.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

3. Select Activate. To deactivate call barring, select

Deactivate

4. Enter the call barring password supplied by your

7. Press <Select>.

service provider and press <Select>.

Call barring (Menu 9.6.2)

Call waiting (Menu 9.6.3)

This network service allows you to restrict your calls.

1. Select a call barring option:

This network service informs you when someone is

trying to reach you while you are on another call.

•

All outgoing calls: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home country.

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate and press <Select>. To

deactivate call waiting, select Deactivate

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Network selection (Menu 9.6.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area. You can select a

network other than your home network only if there is

a valid roaming agreement between the two.

Voice server number: enter the voicemail server

number.

Closed user group (Menu 9.6.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group (CUG), contact your

service provider.

Caller ID (Menu 9.6.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

•

Index list: add, delete, or activate CUG index

numbers.

Some networks may not allow you to change this

setting.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.6.6)

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Use this menu to store the number of the voicemail

server and access your voicemails.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

Menu functions

•

My devices: search for connectable Bluetooth

devices.

Bluetooth (Menu 9.7)

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Bluetooth services: display available Bluetooth

services.

• If there are obstacles between the devices, the

operating distance may be reduced.

• It is recommended that you do not use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and MP3 player,

or vice versa, for better performance.

• Some devices may not be compatible with your

phone.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search for new devices

Setting up the Bluetooth feature

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

Using device options

•

Stereo headset

Computer

•

Printer

From the device list, press <Options> to access the

following options:

PDA

Mobile phone

Unknown device

•

Connect: connect to a headset or hands-free car

kit.

Mono headset/Hands-free car kit

The colour of the icon indicates the status of the

the device:

Disconnect: end the connection with the

connected device.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Browse files: search for data from the device and

import data directly to your phone.

Service list: access the Bluetooth service list of

the device.

3. Select a device.

•

Rename: rename the paired device.

4. Enter a Bluetooth PIN and press <OK>. This code

Authorise device/Unauthorise device:

is used just once and you don’t need to memorise

it.

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

When the owner of the other device enters the

same code, pairing is complete.

•

Delete: remove the selected device or all devices

from the list.

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as 0000

If the other device has a code, you must enter it.

Menu functions

Sending data via Bluetooth

Security (Menu 9.8)

1. Activate the Bluetooth feature.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

2. Select the application in which the item you want

to send is stored.

3. Scroll to the item you want and press <Options>.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

PIN check (Menu 9.8.1)

6. If necessary, enter the Bluetooth PIN needed for

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active and its visibility must be

enabled.

Change PIN code (Menu 9.8.2)

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

Phone lock (Menu 9.8.3)

2. Press <Yes> to receive data.

Use this menu to lock the phone from unauthorised

use.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

Fixed dialling mode (Menu 9.8.7)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.8.4)

Change PIN2 code (Menu 9.8.8)

Use this menu to change your phone password.

If supported by your SIM card, use this menu to

change your current PIN2.

Privacy (Menu 9.8.5)

Use this menu to lock access to messages, media files,

or all menu functions on the phone, except for call

functions.

Connection settings (Menu 9.9)

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

When a privacy option is enabled, you must enter the

phone password to access the locked items or

functions.

Your phone is set up by default for connecting to the

network. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

SIM lock (Menu 9.8.6)

This menu allows your phone to work only with the

current SIM by assigning a SIM lock code. You must

enter the SIM lock code to use a different SIM card.

Menu functions

•

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Creating a profile

1. Press <New>. If a profile has already been saved,

press <Options> and select Add new

connection

When the bearer is set to GPRS:

2. Specify profile parameters:

APN: enter the access point name.

•

Profile name: enter a profile name.

Homepage URL: enter the URL address of the

page to be used as your homepage.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

Password: enter the login password.

When the bearer is set to GSM

•

Dial number: enter the PPP phone number.

Password: enter the login password.

•

Port: enter the port number of the proxy

server.

Linger time: set a time period after which the

network is disconnected if there has been no

new data traffic in that time.

Data call type: select a call type for data

transmission.

3. Press <Save> to save the profile.

Using profile options

•

DNS: activate or deactivate the DNS (Domain

Name Server) addresses.

DNS 1 and DNS 2: enter the primary and

secondary DNS addresses.

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

Bearer: select the network bearer type.

Add new connection: add a new profile.

Reset settings (Menu 9.10)

Solve problems

Help and personal needs

Use this menu to reset the phone’s settings you have

changed.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

1. Press [

reset.

] to select the setting categories to be

2. Press <Reset>.

When you switch on your phone, the following

messages may appear:

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

change this password.

ꢀp. 93

“Enter password”

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

•

Be sure that you are accessing the correct cellular

network.

•

The PIN has been entered incorrectly three times

in succession, and the phone is now blocked. Enter

the PUK supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No service,” “Network failure,” or “Not done”

displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Warning

Low

You have entered a number but it was not dialled

battery” flashes on the display

•

Be sure that you have pressed [ ].

•

Your battery is insufficiently charged. Recharge the

battery.

The audio quality of the call is poor

Be sure that you have accessed the right cellular

network.

•

Be sure that you have not set an outgoing call

barring option.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Your correspondent cannot reach you

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

Health and safety information

•

Use the Contact list menu to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery doesn’t charge properly or the phone

sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to solve

the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The highest SAR value for this model phone was 0.547W/

kg.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

100

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

101

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

102

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

103

Index

Browser, web • 49

CB (Cell Broadcast) messages •

57 66

Characters, enter • 26

Configuration messages • 56

Connection tone • 86

Converter • 47

Creating messages

e-mail • 54

MMS • 53

SMS • 52

CUG (Closed User Group) • 89

Display

brightness • 85

AB mode, text input • 26

Active flip • 84

Alarm • 45

icons • 10

language • 84

layout • 10

Calculator • 47

Calendar • 72

Call cost • 34

Call log

Answering

settings • 84

call • 29

Diverting, calls • 87

Document files • 70

DRM (Digital Rights

Management) • 66

DTMF tones, send • 31

second call • 31

Anykey answer • 84

Auto redial • 84

dialled • 33

missed • 33

received • 33

Call time • 33

Caller groups • 36

Background image • 85

Backlight, set

display • 87

Caller ID • 85

Calls

Date, set • 83

Deleting

call log • 32

E-mails

answering • 29

barring • 88

creating/sending • 54

deleting • 59

setting • 63

viewing • 58

Emergency calls • 101

keypad • 87

Barring, calls • 88

Battery

diverting • 87

holding • 30

redialling • 28

rejecting • 29

transferring • 32

waiting • 88

e-mail • 58

events • 75

MMS • 56 58

phonebook • 35

SMS • 56 58 60

Dialled calls • 33

59, 60

charging • 7

low indicator • 8

precautions • 98

Bluetooth

FDN (Fixed Dialling Number)

mode • 93

receiving, data • 92

sending, data • 92

settings • 90

Camera

Dialling font, set • 85

Dialling, voice • 46

File manager • 66

File viewer • 70

Flip tone • 86

photos • 76

videos • 80

Broadcast messages • 57 66

104

MMS • 53

push • 57

SMS • 52

Games • 44

Language, select • 84

Last number, redial • 28

Light settings • 87

Locking

Password

Greeting message • 84

call barring • 88

phone • 93

Minute minder • 86

Missed calls • 33

MMS messages

Phone

Health and safety • 97

Holding, call • 30

menu functions • 93

phone • 92

SIM card • 93

care and maintenance •

102

display • 10

icons • 10

locking • 92

password • 93

resetting • 95

switching on/off • 8

unpacking • 6

creating/sending • 53

deleting • 56

setting • 62

Low battery indicator • 8

Icons, description • 10

Image editor • 42

Images, downloaded • 66

Inbox, messages

e-mail • 58

viewing • 55

MP3 player • 38

Multiparty-call • 32

Music, downloaded • 69

Memory card

accessing files • 72

installing • 24

Memory status

downloaded items • 72

file manager • 72

messages • 66

phonebook 38

Menu style • 85

Message tone • 86

Messages

MMS/SMS • 55

International calls • 28

Internet • 49

Phonebook

adding • 35

Name card • 37

Names

deleting • 35

finding • 34

managing • 37

options • 34

dialling • 46

entering • 26

searching • 34 46

Java applications • 44

Network selection • 89

Network services • 87

speed dialling • 36

Keypad tones

selecting • 86

sending/muting • 31

volume • 86

Photos

cell broadcast • 57

configuration • 57

editing • 42

taking • 76

viewing • 67

Outbox, messages • 58

e-mail • 54

greeting • 84

105

Index

PIN, change • 92

PIN2, change • 93

Power on/off tone • 86

Privacy • 93

Road safety • 99

Roaming • 89

T9 mode, text input • 27

Templates, message • 60

Text, enter • 26

Time, set • 83

Timer • 48

Waiting call • 88

Wallpaper • 85

Web browser

access • 49

Safety

Problems, solve • 95

information • 97

Push messages • 57 65

bookmarks • 51

World clock • 44

precautions • 1

Security, calls • 92

Sent messages • 58

Shortcut • 84

TV out • 68 85

Quiet mode

entering • 13

setting • 86

Videos

SIM card

playing • 68

recording • 80

inserting • 7

locking • 93

Skin colour • 85

SMS messages

Viewing on TV

Received calls • 33

Received messages

e-mail • 58

images • 68

videos • 69

creating/sending • 52

deleting • 56

setting • 61

Voice commands

MMS/SMS • 55

Recording

videos • 80

voice memos • 41

Redialling

automatically • 84

manually • 28

Resetting phone • 95

Ringer

camera settings • 78

menu accessing • 46

name dialling • 46

name searching • 46

viewing • 55

Sound settings • 85

Sounds, downloaded • 70

Speakerphone • 31

Speed dial • 36

Stopwatch • 48

Switching on/off

microphone • 31

phone • 8

Voice recorder

playing • 41

recording • 41

Voicemail server • 89

incoming calls • 85

messages • 86

106

Declaration of Conformity (R&TTE)

For the following product:

GSM900/GSM1800/GSM1900 with Bluetooth

Portable Cellular Telephone

(Product description)

SGH-E870

(Model name)

Manufactured at:

Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City,

Kyung Buk, Korea, 730-350

(factory name, address )

to which this declaration relates, is in conformity with the following

standards and/or other normative documents.

Safety

EMC

: EN 60950-1:2001

: EN 301 489-01 v.1.4.1 (08-2002)

: EN 301 489-07 v.1.2.1 (08-2002)

: EN 301 489-17 v.1.2.1 (08-2002)

: EN 50360:2001

SAR

EN 50361:2001

Network : EN 301 511 v9.0.2 (03-2003)

EN 300 328 v1.4.1 (04-2003)

We hereby declare the [all essential radio test suites have been

carried out and that] the above named product is in conformity to all

the essential requirements of Directive 1999/5/EC.

The conformity assessment procedure referred to in Article 10 and

detailed in Annex[IV] of Directive 1999/5/EC has been followed with

the involvement of the following Notified Body(ies):

BABT, Balfour House, Churchfield Road,

Walton-on-Thames, Surrey, KT12 2TD, UK

Identification mark: 0168

The technical documentation kept at:

Samsung Electronics Euro QA Lab.

which will be made available upon request.

(Representative in the EU)

Samsung Electronics Euro QA Lab.

Blackbushe Business Park, Saxony Way,

Yateley, Hampshire, GU46 6GG, UK

2006. 01. 18

Yong-Sang Park/S. Manager

(place and date of issue)

(name and signature of authorised person)

It is not the address of Samsung Service Centre. For the address or the phone number

of Samsung Service Centre, see the warranty card or contact the retailer where you

purchased your phone.

* Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-09120A

English. 04/2006. Rev. 1.0

World Wide Web

http://www.samsungmobile.com

Whirlpool ELECTRIC LG5796XM User Manual
Tascam MD 801P Mk II User Manual
Sprint Nextel Cell Phone LG OPTIMUS F3 User Manual(1)
Sony ICFCS10IP User Manual
Sony Ericsson UMTS GSM 1900 User Manual
Sonic Alert SB300SS User Manual
Seagate ULTRA ATA ST315323A User Manual
Philips SAC2560 User Manual
Philips PSA[FM ACT100 User Manual
Oregon Scientific Radio controlled projection clock RM303P User Manual