Samsung SGH E635 User Manual

SGH-e635  
P O R T A B L E T r i - B a n d  
T E L E P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
UVEE5_1.2_WCe635_060305_f5  
GH68-06940A  
Openwave® is a registered Trademark of Openwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY  
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH  
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS  
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE  
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,  
CONDITION OR QUALITY OF THE PRODUCT; THE  
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP  
OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING  
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR  
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS.  
Table of Contents  
Table of Contents  
1
2
Table of Contents  
3
Section 1: Getting Started  
Topics Covered  
• Activating Your Phone  
• Switching Your Phone On or Off  
• Setting Up Voicemail  
This section allows you to start using your phone by  
activating your service and setting up your voice mail.  
Section 1: Getting Started  
5
   
Activating Your Phone  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and many others.  
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged  
by scratching or bending, so be careful when handling, inserting, or  
removing the card.  
Keep all SIM cards out of reach of small children.  
If necessary, switch off the phone by holding down the  
key until the power-off image displays.  
Remove the battery. To do so:  
1. Push in the battery lock toward the top of the phone and  
hold it in that position.  
2. Lift the battery away, as shown.  
6
       
Activating Your Phone  
3. Slide the SIM card into the SIM card socket so that the  
card locks into place. Make sure the gold contacts of the  
card face into the phone.  
Note: When you need to remove the SIM card, slide it, as shown, and  
take it out of the socket.  
4. Place the battery so that the tabs on the end align with  
the slots at the bottom of the phone.  
Section 1: Getting Started  
7
 
5. Press the battery down until it clicks into place. Make  
sure that the battery is properly installed before  
switching on the phone.  
Charging a Battery  
YourphoneispoweredbyarechargeableLi-ionbattery.A  
travel adapter comes with your phone for charging the  
battery. Use only approved batteries and chargers. Ask  
your local Samsung dealer for further details.  
You can use the phone while the battery is charging, but  
this causes the phone to charge more slowly.  
Note: You must fully charge the battery before using your phone for the  
first time. A discharged battery recharges fully in approximately 200  
minutes.  
8
   
Activating Your Phone  
1. With the battery in position on the phone, plug the  
connector of the travel adapter into the jack at the  
bottom of the phone.  
2. Plug the adapter into a standard AC wall outlet.  
3. When charging is finished, unplug the adapter from the  
AC wall outlet and disconnect it from the phone by  
pressing the buttons on both sides of the connector and  
pulling the connector out.  
Note: You must unplug the adapter before you remove the battery from the  
phone during charging; otherwise, the phone could be damaged.  
Section 1: Getting Started  
9
Low Battery Indicator  
When the battery is weak and only a few minutes of talk  
time remain, your phone does the following:  
Sounds a warning tone.  
Repeats the “Warning Low Battery” message at regular  
intervals on the display.  
Turns off the display backlight to conserve the remaining  
battery power.  
When the battery level becomes too low, the phone  
automatically turns itself off.  
Switching your Phone On or Off  
1. Slide the phone open.  
2. Press and hold the  
3. If the phone asks you to enter the phone password, enter  
the password and press the OK soft key or the key.  
key until the phone switches on.  
The password is preset to “00000000” at the factory. For  
4. If the phone asks for a PIN, enter the PIN and press the  
OK soft key or the  
key. For further details, see "PIN  
The phone searches for your network and after finding it,  
the Idle screen appears. Now, you can make or receive  
calls.  
Note: The display language is preset to English at the factory. To change  
the language, use the Language menu. For further details, see  
10  
         
Setting Up Your Voice Mail  
5. When you wish to switch off the phone, press and hold  
the  
key until the power-off image displays.  
Setting Up Your Voice Mail  
For new users, follow the instructions below to set up  
voicemail:  
To set up your voice mail, use the following steps:  
1. Slide your phone open to access the keypad.  
2. In idle mode, press and hold the  
key on the keypad.  
You are prompted to enter the password.  
3. Follow the tutorial to create a password, a greeting, and  
your name.  
Note: These steps may be different depending on your network.  
Accessing Your Voice Mail  
To access you voice mail from your keypad, use the  
following steps:  
1. Slide your phone open to access the keypad.  
2. From the Idle screen, press and hold the  
key.  
3. Follow the voice mail prompts to access your messages.  
To access you voice mail by using the menu, use the  
following steps:  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
Section 1: Getting Started  
11  
     
3. Highlight Voice mail and press the Select soft key or the  
key.  
4. Highlight Call voice mail and press the Select soft key  
or the  
key. Your phone dials the specified voice mail  
number.  
5. When connected, follow the voice prompts from the  
voice mail center.  
Changing the Voice Mail Number  
YourSIMcardgivesyouthedefaultservicenumberofthe  
voice mail center. However, you may need to change the  
number. To change your voice mail number, use the  
following procedures:  
1. In Idle mode, press the Menu soft key to access the  
Menu mode.  
2. Highlight Messages and press Select soft key or the  
key.  
3. Highlight Voice mail and press Select soft key or the  
key.  
4. Highlight Voice server number and press the Select  
soft key or the  
key.  
5. Highlight Empty and press the Select soft key or the  
key.  
6. Highlight Edit number and press the Select soft key or  
the  
key to change the number.  
7. Edit the number, then press the OK soft key or the  
key to save the update.  
8. Press the  
key to return to Idle mode.  
12  
 
Section 2: Understanding Your Phone  
Topics Covered  
• Features of Your Phone  
• View of Your Phone  
• Keys  
• Display Layout  
This section outlines some key features of your phone. It  
also displays the screen and the icons that are displayed  
when the phone is in use.  
Section 2: Understanding Your Phone  
13  
   
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many  
significantfeatures.Thefollowinglistoutlinesafewofthe  
features included in your phone.  
User friendly, menu driven access to features and options  
Instant Messaging capability  
Multimedia capability  
Organizer feature provides alarms, calendar, calculator, to-do  
list, voice memo, conversion capabilities, timer, and stopwatch.  
View of Your Phone  
The following illustrations show the main elements of  
your phone:  
14  
       
Keys  
Keys  
The following list correlates to the illustrations.  
1.  
2.  
The headset jack is used for the hands-free headset.  
Performs the functions indicated by the screen text on  
the bottom line of the display.  
3. During a call, adjusts the earpiece volume.  
In Idle mode with the phone open, adjusts the keypad  
tone volume.  
4. Makes or answers a call.  
In Idle mode, recalls the last number dialed or received  
when held down.  
In Menu mode, selects a menu function or stores  
information that you have entered, such as a name in the  
phone or SIM memory.  
5. In Idle mode, when held down accesses voice mail.  
6. Enters special characters. Performs various functions.  
7. The microphone used during phone calls and voice  
memo recordings.  
Section 2: Understanding Your Phone  
15  
 
8. Enters numbers, letters, and some special characters.  
In idle mode, switches phone to silent mode when held  
down.  
9. Deletes characters from the display.  
In Menu mode, returns you to the previous menu level.  
10. Ends a call. Also switches the phone on and off when  
held down.  
In Menu mode, cancels your input and returns the phone  
to Idle mode.  
11. In Idle mode, launches the WAP (Wireless Application  
Protocol) browser.  
In Menu mode, selects the highlighted menu options.  
12. In Menu mode, scrolls through the menus and  
Phonebook.  
When entering text, moves the cursor to the left or right,  
depending on which side you push.  
In Idle mode you can use the following shortcuts:  
The Down key allows you to access the Phonebook Search  
menu  
The Up key accesses the Camera  
The Left key allows you to write a text message  
The Right key allows you to make a voice recording  
13. The infrared sensor is used to send and receive data.  
14. Display area where text and graphics are displayed.  
15. The earpiece is used to listen to audio from your phone.  
16. The camera key is used to launch the camera (with a  
press and hold) and to take a photo (with a short press).  
16  
Display Layout  
17. The built-in digital camera has video capture  
capabilities.  
18. The built-in flash has manual and automatic capabilities.  
19. The mirror allows you to adjust the camera when taking  
a picture of yourself.  
Display Layout  
The display on your phone indicates when you have an  
incoming call or message. It also alerts you at a specified  
time when you have set an alarm. The backlight turns on  
and the corresponding icon appears on the display.  
When you close the phone, the display shows the current  
timeonadigitalclock.Andthebacklightgraduallydims.  
The display has 3 areas:  
Icons  
Shows the received signal strength. The greater the  
number of bars, the stronger the signal.  
Appears when a new text message has been received.  
Appears when a new voice mail has been received.  
Section 2: Understanding Your Phone  
17  
   
Appears when a new multimedia message has been  
received.  
Appears when the IrDA port is active. For details, see  
Appears when you set an alarm to ring at a specified time.  
For details, see page "Alarm" on page 106.  
Appears when you are out of your service area.  
Appears when a call is in progress.  
Appears when the Call Forwarding feature is active. For  
Appears when Alert type is vibration or you set the phone  
to vibrate when you receive a call.  
Appears when the flash is set to on.  
Appears when Silent mode is active.  
Appears in the soft key function indicator area when Mute  
is active.  
Shows the level of your battery. The more bars you see,  
the more power you have remaining.  
Backlight  
A backlight illuminates the display and the keypad.  
When you press any key or slide open the phone, the  
backlight comes on. It goes off when no keys are pressed  
withinagivenperiodoftime,dependingonthesettingin  
the Backlight menu. The display turns off after one  
minute to conserve battery power.  
18  
 
Display Layout  
Tospecifythelengthoftimethebacklightisactive, setthe  
Backlight menu option. To access the Backlight menu,  
from the idle screen, press the Menu (left) soft key, then  
press  
details.  
(Settings), press  
(Display settings), and  
Section 2: Understanding Your Phone  
19  
20  
Section 3: Call Functions  
Topics Covered  
• Making a Call  
• Adjusting the Call Volume  
• Answering a Call  
• Call Log  
• Call Records  
• Silent Mode  
• Selecting Functions and Options  
Thissectiondescribeshowtomakeoransweracall.Italso  
includes the features and functionality associated with  
making or answering a call.  
Section 3: Call Functions  
21  
   
Making a Call  
When the idle screen displays, enter the area code and  
phone number, and press the  
key.  
Note: When you activate the Auto redial option in the Extra settings menu,  
the phone will automatically redial up to 10 times when the person does  
not answer the call or is already on the phone. See "Extra Settings" on  
page 99 for further details.  
Making an International Call  
1. Press and hold the 0 key. The + character appears.  
2. Enter the country code, area code, and phone number  
and press the  
key.  
Correcting the Number  
1. To clear the last digit displayed, press the C key.  
2. To clear any other digit in the number, press the Left or  
Right Navigation key until the cursor is immediately to  
the right of the digit to be cleared. Press the C key. You  
can also enter a missing digit.  
3. To clear the whole display, press and hold the C key.  
Ending a Call  
When you want to finish your call, briefly press the  
key.  
22  
       
Making a Call  
Redialing the Last Number  
The phone stores the numbers of the calls you’ve dialed,  
received, or missed if the call recipient or caller is  
identified. See "Caller ID" on page 104 for further details.  
To recall any of these numbers:  
1. If you have typed characters on the display, press the  
key to return to Idle mode.  
2. Press the  
key to display a list of the most recent  
numbers used in the order you dialed or received them.  
3. Use the Up and Down keys to scroll through the  
numbers until the number you want highlights.  
4. To dial the number, press the  
key.  
Before you dial the number, you also have the following  
options:  
To see the details of the number, press the Options soft key  
and select Details. Press the Select soft key or the  
key.  
To dial the number, press the Options soft key and select  
Call back. Press the Select soft key or the  
key.  
To send a message to the number, press the Options soft key  
and select Send Message. Press the Select soft key or the  
key. You have the option of sending a text, picture, or voice  
message.  
To edit the number, press the Options soft key and select  
Edit. Press the Select soft key or the  
key. Edit the  
number, then press the Save soft key.  
To delete the number, press the Options soft key and select  
Delete. Press the Select soft key or the key.  
To delete all of the numbers, press the Options soft key and  
select Delete all. Press the Select soft key or the  
key.  
Section 3: Call Functions  
23  
 
Making a Call from the Phonebook  
You can store phone numbers that you use regularly on  
your SIM card or in your phone’s memory. These entries  
are collectively stored in the Phonebook.  
Once you have stored a number in the Phonebook, you  
can dial the number by pressing a few keys.  
You can also assign Speed Dial keys to your most  
frequently-used numbers.  
For further details about the Phonebook feature, see  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece volume,  
use the Volume keys on the left side of the phone.  
Pressthe keytoincreasethevolumelevelandthe key  
to decrease the level.  
InIdlemode, youcanalsoadjustthekeypadtonevolume  
using these keys.  
24  
     
Answering a Call  
Answering a Call  
When somebody calls you, the phone rings and displays  
the incoming call image.  
The caller’s phone number, or name if stored in  
Phonebook, displays.  
1. If necessary, open the phone. Press the  
key or the  
Accept soft key to answer the incoming call.  
If the Anykey answer option in the Extra Settings menu  
is activated, you can press any key to answer a call  
except for the  
key and the Reject soft key.  
If the Accept Call option in the Slide Settings menu is  
activated, you can answer the call simply by sliding the  
phone open.  
Note: To reject an incoming call, press and hold the Volume keys on the left  
side of the phone before opening the phone, or press the Reject soft key or  
key.  
2. End the call by closing the phone or pressing the  
key.  
Note: You can answer a call while using the Phonebook or menu features.  
After ending the call, the phone returns to the function screen you were  
using.  
Section 3: Call Functions  
25  
   
Call Log  
All incoming, outgoing and missed calls are listed in the  
Call Log.  
1. To access the Call Log option, press the  
key. A list of  
calls displays.  
2. Press the Options soft key to see Details, Call back, Edit,  
Send message, or Delete the calls.  
3. To place a call press the  
key.  
Viewing Missed Calls  
When you are unable to answer a call for any reason, you  
can find out who is calling you, if this service is available,  
so that you can call the person back.  
The number of calls you have missed displays on the idle  
screen immediately after a call is missed.  
To view a missed call immediately:  
1. If the phone is closed, open the phone.  
2. Press the View soft key.  
Thenumbercorrespondingtothemostrecentmissedcall  
displays, if available.  
3. To scroll through the missed calls, press the Up or Down  
key.  
4. To call the number displayed, press the  
key.  
Editing a Missed Call Number  
To edit a missed call number:  
1. Press the View soft key. Press the Options soft key and  
select Edit.  
26  
       
Call Log  
2. Change the number and press the Save soft key or the  
key.  
3. Select a location (SIM or Phone) and press the Select  
soft key or the  
4. If you saved the number to Phone, highlight a phone  
type and press the Select soft key or the key.  
5. Enter a name and press the OK soft key or the  
key.  
key.  
6. Press the Options soft key to Send message, Assign  
speed dial, Edit name or number, Delete entry, Copy, or  
Send via infrared.  
Note: When the number corresponding to the missed call is not available,  
the Edit option does not display.  
Deleting a Missed Call  
1. Press the View soft key. A list of missed calls displays.  
2. If necessary, press the Up or Down key to highlight the  
missed call and press the Options soft key.  
3. Highlight Delete and press the Select soft key or the  
key.  
4. Select Yes to confirm deletion or No to cancel.  
You can press the  
Call feature.  
key at any time to exit the Missed  
Note: You can access the Missed Call feature at any time by selecting the  
Missed calls menu.  
Section 3: Call Functions  
27  
 
Call Records  
In this menu, you can view:  
missed calls, incoming calls, and outgoing calls.  
length of your calls.  
Note: You can access the call records of incoming, outgoing, and missed  
calls by pressing the  
key in Idle mode.  
Note: The number of call records the phone can store may vary, depending  
on your SIM card.  
Missed calls  
This menu lets you view the 20 most recent calls you  
received, but did not answer.  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
received.  
Incoming calls  
This menu lets you view the 20 most recent calls you  
received.  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
received.  
Outgoing calls  
This menu lets you view the 20 most recent calls you  
dialed.  
28  
       
Call Records  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
made.  
Delete all  
This menu allows you to delete all of the records in each  
call record separately, or you can delete all of your call  
records at one time.  
1. Highlight the type of calls you want to delete and press  
the Select soft key or the  
key to make a check mark.  
2. Press the Delete soft key to delete the calls.  
3. When a confirmation message displays, press the Yes  
soft key or  
key to confirm.  
Call time  
This menu lets you view the time log for calls made and  
received.  
Note: The actual time invoiced by your service provider may vary,  
depending on network features, rounding-off for billing purposes, and so  
on.  
The following time logs are available:  
Last call: shows the length of your last call.  
Total outgoing: shows the total length of all calls you have  
made since the timer was last reset.  
Total incoming: shows the total length of all calls you have  
received since the timer was last reset.  
Life time: shows the total length of time for incoming and  
outgoing calls. The length of call time must be at least 1  
Section 3: Call Functions  
29  
   
minute to increment this field. This information cannot be  
cleared.  
Reset timers: allows you to reset the call timers. You must  
first enter the phone password and then press the OK soft key  
or  
key.  
Note: The password is preset to “00000000” at the factory. To change this  
Note: This will not reset the Life time timer option.  
Silent Mode  
Silent mode is convenient when you wish to stop the  
phone from making noise, in a theater for example.  
In Idle mode, press and hold the key until the “Silent  
Mode On” message and the Silent Mode icon ( ) is  
displayed.  
In Silent mode, instead of sounds, your phone will  
vibrate.  
To exit and reactivate the previous sound settings, press  
and hold the key again until “Exit Silent Mode”  
appears. The Silent Mode icon ( ) no longer displays.  
Selecting Functions and Options  
Your phone offers a set of functions that allow you to  
customize it. These functions are arranged in menus and  
sub-menus, accessed using the two soft keys. Each menu  
andsub-menuallowsyoutoviewandalterthesettingsof  
a particular function.  
30  
       
Selecting Functions and Options  
Soft Keys  
The roles of the soft keys vary depending on the function  
youarecurrentlyusing;thelabelsonthebottomlineofthe  
display just above each key indicate their current role.  
Menu  
Ph.Book  
Press the right soft key  
Press the left soft key  
for Menu mode.  
to access the Ph.Book  
menu.  
Selecting Options  
To view the various functions and options available and  
to select the one you want:  
1. Press the appropriate soft key.  
2. To select the function displayed or the option  
highlighted, press the Select soft key or the  
key.  
3. To view the next function or highlight the next option on  
a list, press the Down Navigation key.  
Section 3: Call Functions  
31  
 
4. To move back to the previous function or option on a list,  
press the Up key.  
5. To move back up one level in the menu structure, press  
the key.  
6. To exit the menu structure without changing the settings,  
press the  
key.  
In some functions, you may be asked for a password or  
PIN. Enter the code and press the OK soft key or the  
key.  
When you access a list of options, your phone highlights  
thecurrentlyactiveoption.If,however,thereareonlytwo  
options, such as On/Off or Enable/Disable, your phone  
highlights the option that is not currently active, so that  
you can select it directly.  
Options During a Call  
Your phone provides a number of control functions that  
you can use during a call.  
Putting a Call on Hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a call in  
progress if your network supports this service.  
To place a call on hold, simply press the Options soft key,  
highlight theHoldoptionand press theSelectsoft key or  
the  
key. You can reactivate the call whenever you  
want, by pressing the Resume soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or look it up  
in the Phonebook.  
32  
   
Selecting Functions and Options  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or  
1. Press the Options soft key and select New call.  
2. Make the second call in the normal way.  
When you have an active call and a call on hold, you can  
switchbetweenthetwocalls, changingtheoneonholdto  
active and placing the other on hold.  
To switch between the two calls, simply press the Swap  
soft key.  
The current call is placed on hold and the call on hold is  
reactivatedsothatyoucancontinueconversingwiththat  
person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone  
off, so that the other person cannot hear you.  
Example: You wish to say something to another person in the room, but do  
not want the person on the phone to hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key or the  
key.  
2. If necessary, press the Down key to highlight the Mute  
option.  
3. Press the Select soft key or the  
key. The other  
person can no longer hear you.  
Section 3: Call Functions  
33  
 
To switch the microphone back on:  
1. Press the Opt. soft key or the  
key.  
2. If necessary, press the Down key to highlight the  
Unmute option.  
3. Press the Select soft key or the  
key. The other  
person can hear you again.  
Using the Speakerphone  
While on a call, you can use your Speakerphone by  
following these steps:  
1. Press the Spkr on soft key.  
2. You will receive the confirmation, Speaker On?  
3. Press the Yes soft key.  
4. To turn the Speakerphone off, press the Spkr off soft  
key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If  
the Mute keys option is selected, your phone does not  
transmittheDTMF(DualToneMulti-Frequency)tonesof  
the keys, which allows you topress keys without hearing  
annoying key tones during a call.  
Note: To communicate with answering machines or computerized  
telephone systems, the Send keys option must be selected.  
Searching for a Number in Phonebook  
You can search for a number in Phonebook during a call.  
1. Press the Options soft key or the  
key.  
34  
   
Selecting Functions and Options  
2. Press the Down key to highlight the Phonebook option  
and press the Select soft key or the  
key.  
3. Press the Down key to highlight the Search option and  
press the Select soft key or the  
key.  
The Phonebook entries are listed.  
4. Enter the name that you wish to find in the textbox  
located below the entries.  
5. If you enter the first few letters of the name, the  
Phonebook entries are listed starting with the first entry  
matching your input.  
6. To view the highlighted entry, press the View soft key.  
For further details about the Phonebook feature, see  
Call Waiting  
You can answer an incoming call while you have a call in  
progress, if this service is supported by the network and  
you have set the Call waiting menu to Activate. You are  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call. The first  
call is automatically put on hold.  
2. To switch between the two calls, press the Swap soft  
key.  
Toendacallonhold, presstheOptionssoftkeyorthe  
key and select the End held call option.  
To end the current call, press the  
key.  
Section 3: Call Functions  
35  
 
Making a Multi-Party Call  
Amulti-partycallisanetworkservicethatallowsuptosix  
people to take part simultaneously in a multi-party or  
conference call.  
For further details about subscribing to this service,  
contact your service provider.  
Setting up a Multi-Party Call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way. The first  
call is automatically put on hold.  
3. To join the first participant to the multi-party call, press  
the Options soft key or the  
key and select Join.  
Press the OK soft key or the  
key.  
4. To add a new person to the multi-party call, call the new  
person in the normal way and then press the Options  
soft key or the  
the OK soft key or the  
You can add incoming callers by answering the call and  
key. Select the Join option and press  
key.  
pressingtheOptions softkeyorthe  
key, andselecting  
Join. Repeat as required.  
Having a Private Conversation With One Participant  
1. Press the Options soft key or the  
key and choose the  
Split option. Press the Select soft key or the  
key.  
The list of call participants appears.  
2. Highlight a person by pressing the Up or Down key, and  
press the Select soft key, the key, or the key.  
36  
   
Selecting Functions and Options  
Now you can talk privately to that person. The other  
participants can continue to converse with each other.  
3. To return to the multi-party call, press the Options soft  
key or the  
key or the  
key and select Join. Press the Select soft  
key.  
All of the multi-party call participants can now hear each  
other.  
Dropping One Participant  
1. Press the Options soft key or the  
key and choose the  
Split option. Press the Select soft key or the  
key.  
The list of call participants appears.  
2. Highlight a person by pressing the Up or Down key, and  
press the Select soft key or the key.  
3. Press the Options soft key. Highlight the End held  
multiparty option. Press the Select soft key or the  
key.  
The call with that participant ends, but you can continue  
to talk to the other participants.  
4. When you want to end the multi-party call, close the  
phone or press the  
key.  
Section 3: Call Functions  
37  
 
38  
Section 4: Menu Navigation  
Topics Covered  
• Menu Navigation  
• Menu Outline  
This section explains the menu navigation for your  
phone. It also includes an outline of all the available  
menus associated with your phone.  
Section 4: Menu Navigation  
39  
   
Menu Navigation  
You can tailor the phone’s range of functions to your  
needs using menus and sub-menus. Menus and sub-  
menus can be accessed by scrolling using the Navigation  
keys or by using the shortcuts.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Scroll using the Navigation keys to reach a main menu  
Settings, for example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Language for  
example, you can access them by pressing the Select  
soft key or the  
key.  
If the menu that you have selected contains further  
options, repeat this step.  
4. To scroll through the menus, press the Up or Down  
Navigation keys.  
5. To confirm the chosen setting, press the Select soft key,  
or the  
6. To return to the previous menu level, press the key, or  
the key.  
7. To exit the menu without changing the settings, press  
the key.  
key.  
40  
   
Menu Outline  
Using Shortcuts  
Themenuitems,suchasmenus,sub-menus,andoptions,  
arenumberedandcanbeaccessedquicklybyusingtheir  
shortcut numbers. For the main menus, you can access  
any one of them by pressing the number keys (1 to 0)  
corresponding to their location on the screen.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press the 9 key for Settings.  
3. Press the 6 key for Language.  
Menu Outline  
The following list shows the menu structure and  
indicates the number assigned to each option.  
1
2
Voice messages  
Call records  
2.1 Missed calls  
2.2 Incoming calls  
2.3 Outgoing calls  
2.4 Delete all  
2.5 Call time  
2.5.1  
2.5.2  
2.5.3  
2.5.4  
2.5.5  
Last call  
Total outgoing  
Total incoming  
Life time  
Reset timers  
Section 4: Menu Navigation  
41  
     
3
t-zones  
3.1 Home  
3.2 Favorites  
3.3 Go to URL  
3.4 Clear cache  
4
5
IM  
Messages  
5.1 Text messages  
5.1.1  
5.1.2  
5.1.3  
5.1.4  
Create  
Inbox  
Outbox  
Delete all  
5.2 Picture messages  
5.2.1  
5.2.2  
5.2.3  
5.2.4  
5.2.5  
Create  
Inbox  
Outbox  
Draft  
Delete all  
5.3 Browser messages  
5.3.1  
5.3.2  
5.3.3  
Inbox  
Receive  
Delete all  
5.4 Voice mail  
5.4.1  
Call voice mail  
5.4.2  
Voice server number  
5.5 Broadcast messages*  
5.6 Settings  
5.6.1  
Text messages  
5.6.2  
Picture messages  
5.7 Memory status  
42  
Menu Outline  
5.7.1  
5.7.2  
Text messages  
Picture messages  
6
Fun box  
6.1 t-zones  
6.2 Sounds  
6.3 Images  
6.4 Games  
6.5 My photos  
6.6 Delete all  
6.6.1  
6.6.2  
6.6.3  
Sounds  
Images  
My photos  
6.7 Memory status  
6.7.1  
Sounds & Images  
6.7.2  
Games  
6.8 Melody composer  
6.8.1  
Compose melody  
6.8.2  
Memory status  
7
Organizer  
7.1 Alarm  
7.2 Calendar  
7.3 Calculator  
7.4 To do list  
7.5 Voice memo  
7.5.1  
7.5.2  
7.5.3  
7.5.4  
7.5.5  
Record voice  
Voice memos  
Delete all  
Settings  
Memory status  
7.6 Conversion  
Section 4: Menu Navigation  
43  
7.6.1  
7.6.2  
7.6.3  
7.6.4  
7.6.5  
Length  
Weight  
Volume  
Area  
Temperature  
7.7 Timer  
7.8 Stopwatch  
8
Camera  
8.1 Take and Send  
8.2 My photos  
8.3 My Album  
8.4 My Journal  
8.5 Delete all  
8.6 Settings  
8.6.1  
8.6.2  
8.6.3  
8.6.4  
Photo size  
Shutter sound  
Flash light  
Default name  
8.7 Memory status  
9
Settings  
9.1 Time & Date  
9.1.1  
9.1.2  
9.1.3  
9.1.4  
9.1.5  
Set date  
World time  
Set time  
Time format  
Auto update  
9.2 Display settings  
9.2.1  
9.2.2  
9.2.3  
Wallpaper  
Display  
Backlight  
44  
Menu Outline  
9.2.4  
9.2.5  
Brightness control  
Dialing font color  
9.3 Sound settings  
9.3.1  
9.3.2  
9.3.3  
9.3.4  
9.3.5  
9.3.6  
9.3.7  
9.3.8  
9.3.9  
9.3.0  
9.3.*  
My MegaTones  
Get More MegaTones  
Ringtones  
Ring volume  
Alert type  
Keypad tone  
Message tone  
Power on/off  
Alerts on call  
Silent mode  
Extra tones  
9.4 Get More Help  
9.5 Greeting message  
9.6 Language  
9.6.1  
Text language  
9.6.2  
Input mode  
9.7 Security  
9.7.1  
9.7.2  
9.7.3  
9.7.4  
9.7.5  
9.7.6  
9.7.7  
PIN check  
Change PIN  
Phone lock  
Change password  
Privacy  
FDN mode  
Change PIN2  
9.8 Slide settings  
9.8.1  
Up  
9.8.2  
Down  
9.9 Infrared activation  
9.0 Extra settings  
9.* Reset settings  
Section 4: Menu Navigation  
45  
9.*.1  
9.*.2  
9.*.3  
Sound settings  
Phone settings  
All settings  
9.# Network services  
9.#.1  
9.#.2  
9.#.3  
9.#.4  
9.#.5  
Call forwarding  
Call waiting  
Network selection  
Caller ID  
Band selection  
* Shows only if supported by your SIM card.  
46  
Section 5: Entering Text  
Topics Covered  
• Changing the Text Input Mode  
• Using T9 Mode  
• Using ABC Mode  
• Using Symbols  
• Using Numbers  
This section outlines how to select the desired text input  
mode when entering characters into your phone. This  
section also describes how to use the T9 predictive text  
entry system to reduce the number of key strokes  
associated with entering text.  
Section 5: Entering Text  
47  
     
Changing the Text Input Mode  
Whenusingyourphone,youwilloftenneedtoentertext,  
suchaswhenstoringanameinPhonebook,creatingyour  
personal greeting or scheduling events on your calendar.  
You can enter alphanumeric characters by using your  
phone’s keypad.  
Your phone has the following text input modes:  
ABC mode: allows you to enter letters by pressing the key  
labeled with the letter you want. Press the key once, twice,  
three, or four times until it displays.  
T9 mode: allows you to enter words with only one keystroke  
per letter. Each key on the keypad has more than one letter; for  
example, pressing the 5 key can enter J, K, or L. However, the  
T9 mode automatically compares the series of keystrokes you  
make with an internal linguistic dictionary to determine the  
most likely word, thus requiring far fewer keystrokes than the  
traditional ABC mode.  
Symbol mode: This mode allows you to enter symbols, such as  
punctuation marks.  
Number mode: This mode allows you to enter numbers.  
When you are in a field that allows characters to be  
entered, you will notice the text input mode indicator on  
the display.  
Example: Writing a text message.  
48  
         
Using T9 Mode  
Text input mode  
indicator  
1. To change the text input mode, press the  
key.  
2. Highlight the input option you want, and press the  
Select (left) soft key ( ) or the  
key.  
3. Choose from the following options:  
: ABC mode  
: T9 mode  
: Number mode  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key  
in any character using single keystrokes. This text input  
mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word by  
pressing the 2 to 9 keys. Press each key only once for  
each letter.  
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.  
Section 5: Entering Text  
49  
   
The word that you are typing appears on the display. It  
may change with each key that you press.  
2. Enter the whole word before editing or deleting the  
keystrokes.  
3. When the word displays correctly, go to step 4.  
If the word doesn’t display correctly, press the 0 key to  
display alternative word choices for the keys that you  
have pressed.  
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays  
the most commonly used choice first.  
4. Insert a space by pressing the key and start entering  
the next word.  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the word you  
want to add, press the 0 key to display the alternative  
words.  
2. When you press the 0 key at the last alternative word,  
the display shows Spell on the bottom line. Press the  
Spell soft key or the  
key.  
3. Enter the word you want to add using ABC mode.  
4. Press the OK soft key.  
The word is added to the T9 dictionary and becomes a  
word for the associated keypress series.  
Note: This feature may not be available for some languages.  
50  
Using ABC Mode  
To enter periods, hyphens, or apostrophes, press the 1 key. T9  
mode applies grammar rules to ensure that correct punctuation  
is used.  
To see all of the symbols, press and hold the key. Use the Up  
and Down Navigation keys to page through the different  
symbols. Press the corresponding number to the symbol you  
want. Press the OK soft key.  
To shift case in T9 mode, use the key. There are 3 cases:  
Initial capital, Capital lock, and Lower case.  
You can move the cursor by using the Left and Right keys. To  
delete letters, press the C key. Press and hold the C key to  
clear the display.  
Using ABC Mode  
To use ABC Mode, use the 1 to 0 keys to enter your text.  
1. Press the key labeled with the letter you want:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When  
entering the same letter twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move to the right automatically,  
and then select the next letter.  
Keys  
Section 5: Entering Text  
51  
   
52  
Using Symbols  
Using Symbols  
Symbol mode enables you to insert symbols and  
punctuation marks into text.  
1. To select a symbol, press the corresponding number key.  
2. To display more symbols, press the Up or Down  
Navigation key.  
3. To clear the symbol(s), press the C key. When the input  
field is empty, this key returns the display to the  
previous mode.  
4. To insert the symbol(s) into your message, press the OK  
soft key or the  
key.  
Using Numbers  
Number mode enables you to enter numbers into a text  
message. Press the keys corresponding to the digits you  
want to enter.  
Section 5: Entering Text  
53  
       
54  
Section 6: Understanding Your  
Phonebook  
Topics Covered  
• Storing a Number in the SIM Card  
• Storing a Number in the Phone’s Memory  
• Finding a Phonebook Entry  
• Using Phonebook Entry Options  
• Dialing a Number from Phonebook  
• Speed Dialing  
• Editing a Caller Group  
• Dialing a Number from the SIM Card  
• Copying all SIM Phonebook Entries  
• Deleting all Phonebook Entries  
• Finding My Phone Number  
• Using the Service Dialing Numbers  
• Checking the Memory Status  
This section allows you to manage your daily contacts by  
storing their name and number in your Phonebook.  
Phonebookentriescanbesortedbyname,entry,orgroup.  
Section 6: Understanding Your Phonebook  
55  
     
Storing a Number in the SIM Card  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to New entry by pressing the Up or Down key and  
press the Select soft key or the  
3. Highlight the SIM option, by pressing the Up or Down  
key and press the Select soft key or the key.  
key.  
4. Enter a phone number and press the Save soft key or the  
key.  
5. Enter a name and press the OK soft key or the  
key.  
For further details about how to enter characters, see  
After storing, the phone displays the Phonebook entry  
number you just created.  
6. To use the entry options, press the Options soft key.  
The following options are available:  
Send message: allows you to create a message for the  
selected Phonebook entry.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Edit number: allows you to edit the number. Press the OK  
key to save.  
Edit name: allows you to edit the number. Press the OK key  
to save.  
Delete entry: allows you to delete the entry you have  
selected. Press Yes to confirm delete action, or No to cancel.  
Copy to Phone: allows you to copy the number to your  
phone.  
56  
   
Storing a Number in the Phone’s Memory  
Send via infrared: allows you to send your phonebook data  
to another number.  
7. To return to the Idle screen, press the  
key.  
Storing a Number in the Phone’s Memory  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to New entry by pressing the Up or Down key and  
press the Select soft key or the  
3. Select the Phone option by pressing the Up or Down key  
and press the Select soft key or the key.  
4. Select a number Type by pressing the Up or Down key,  
key.  
and press the Select soft key or the  
key.  
The following types are available:  
Mobile: assigns the number entered to the Mobile entry.  
Home: assigns the number entered to the Home entry.  
Office: assigns the number entered to the Office entry.  
Fax: assigns the number entered to the Fax entry.  
Other: allows you to enter more detailed information for the  
entry.  
E-mail: allows you to enter an e-mail address for the number  
entered.  
5. Enter the number you want to store and press the Save  
soft key or the  
key.  
6. Enter a name and press the OK soft key or the  
key.  
For further details about how to enter characters, see  
After storing, the phone displays the Phonebook entry  
and name you just created.  
Section 6: Understanding Your Phonebook  
57  
   
7. To use the entry options, press the Options soft key. The  
following options are available:  
Send message: allows you to send a text or picture  
message for the selected Phonebook entry.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Edit number: allows you to edit the number.  
Edit Name: allows you to edit the name.  
Delete entry: allows you to delete the name and number  
from Phonebook. You are asked to confirm that you wish to  
delete the name and number by pressing the Yes soft key.  
Copy to SIM: allows you to store the number on your SIM  
card.  
Send via infrared: allows you to send your phonebook data  
to another number.  
8. To return to the Idle screen, press the  
key.  
Finding a Phonebook Entry  
You can store phone numbers and their corresponding  
names in your SIM card and phone’s memories. They are  
physically separate but are used as a single entity, called  
Phonebook.  
Depending on your particular SIM card, the maximum  
number of phone numbers the SIM card can store may  
differ.  
1. When the idle screen displays, press the Ph.Book soft  
key.  
2. Highlight the Search option and press the Select soft  
key or the  
key.  
58  
   
Using Phonebook Entry Options  
3. Use the Up or Down Navigation key to highlight the entry  
you want. Or, you may enter the first few letters of the  
name in the text box.  
The Phonebook entries are listed, starting with the first  
entry matching your input.  
4. To view the highlighted entry, press the View soft key.  
5. To select a different entry, press the Up or Down  
Navigation key until the enter you want is highlighted.  
6. To look for a name starting with a different letter, press  
the key labeled with the letter you want.  
7. Once you have found the entry, press the  
key to dial  
the number, or press the Options soft key to access the  
Phonebook entry options.  
Using Phonebook Entry Options  
WhileaccessinganyPhonebookentry,presstheOptions  
soft key to use the options for the entry. The following  
options are available:  
Send message: allows you to create a message for the  
selected Phonebook entry.  
Assign speed dial: allows you to assign a speed dial key  
number to the selected Phonebook entry.  
Edit number: allows you to edit the number. Press the OK key  
to save.  
Edit name: allows you to edit the number. Press the OK key to  
save.  
Delete entry: allows you to delete the entry you have selected.  
Press Yes to confirm delete action, or No to cancel.  
Section 6: Understanding Your Phonebook  
59  
     
Copy to SIM/Phone: allows you to copy the number to another  
location. You can select the memory location, either SIM or  
Phone, and the location number.  
Send via infrared: allows you to send your phonebook data to  
another number.  
Dialing a Number from Phonebook  
Once you have stored phone numbers in the Phonebook,  
youcandialthemeasilyandquicklybyusingthelocation  
numbers that were assigned to them in the Phonebook.  
Note: If you cannot remember a location number, you must go into the  
Search menu in the Phonebook menu to search for the entry by name. For  
Speed Dialing  
Once you have stored phone numbers in your  
Phonebook,youcansetupto8speeddialentriesandthen  
dial them easily whenever you want, simply by pressing  
the associated number key.  
In Idle mode, to speed dial the numbers assigned to keys  
(2 through 9), press and hold the appropriate key.  
Setting Up Speed Dial Entries  
1. When the Idle screen displays, press the Ph.Book soft  
key.  
2. Scroll to Speed dial by pressing the Up or Down key and  
press the Select soft key or the  
key.  
3. Select the key to which you wish to assign the speed-  
dialing number, from the 2 to 9 keys, and press the  
Select soft key or the  
key.  
60  
         
Editing a caller group  
Note: Memory location 1 is reserved for your Voice mail server number.  
4. Choose from the following options:  
Edit number: allows you to change the number you’ve  
assigned to this speed dial number.  
Edit name: allows you to enter or change the name you  
assigned to the speed dial number.  
Delete: allows you to delete the name and number you’ve  
assigned to the speed dial number.  
Editing a caller group  
1. When the idle screen displays, press the Ph.Book soft  
key.  
2. Scroll to Group settings by pressing the Up or Down  
key and press the Select soft key or the  
key.  
3. Scroll through the group list by pressing the Up or Down  
key.  
4. Highlight the group you want and press the Select soft  
key or the  
key.  
5. Select each option and change the settings, as required.  
The following options are available:  
Melody: allows you to set the ring tone to be used when you  
receive a voice call from a member of that group.  
Edit name: allows you to change the name of the group.  
View image: allows you to view the image for that group.  
6. When you are finished, press the C key or the  
key.  
Section 6: Understanding Your Phonebook  
61  
 
Dialing a Number from the SIM Card  
1. In Idle mode, enter the location number for the phone  
number you want to dial and press the  
key.  
The list of entries in the SIM card appears, with the  
desired number highlighted.  
2. You can press the Up or Down key to find other numbers  
on the list.  
3. Press the Dial soft key, the  
key, or the  
key when  
you have selected the number you want.  
Copying all SIM Phonebook Entries  
You can copy all SIM entries to the Phone using this  
option. When you copy entries to the phone, duplicate  
entries are created.  
Note: Options are available for phone entries that are not available when  
stored to the SIM card. For details see "Storing a Number in the Phone’s  
Deleting all Phonebook Entries  
You can delete all your entries from your phone’s  
memory, your SIM card, or both.  
1. When the idle screen displays, press the Ph.Book soft  
key.  
2. Scroll to Delete all by pressing the Up or Down key and  
press the Select soft key or the  
key.  
3. To place a check mark by the memory location you want  
to empty, All, SIM, or Phone, press the Select soft key  
or the  
key.  
62  
       
Finding My Own Phone Number  
You can remove the check mark by pressing the Select  
soft key or the  
key.  
4. Press the Delete soft key to delete the entries in the  
selected memory location.  
5. When the confirmation message appears, press the Yes  
soft key or the  
key.  
6. To cancel the deletion, press the No soft key.  
7. When you are finished, press the C key or the  
key.  
Finding My Own Phone Number  
Thisfunctionisamemoryaid,whichyoucanusetocheck  
your own phone number if you need to do so.  
You can assign a name to each of your own phone  
numbers registered on your SIM card. You can also edit  
the names and numbers. Any changes made here do not  
in any way affect the actual subscriber numbers on your  
SIM card.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Select the Own number option by pressing the Up or  
Down key and press the Select soft key or the  
3. Highlight the Empty option and press the Select key or  
the key.  
4. To edit the number, highlight the Edit number option  
key.  
and press the Select soft key or the  
number and press the OK soft key or the  
key. Edit the  
key.  
5. To edit the Name, highlight the Edit name option and  
press the Select soft key or the  
and press the OK soft key or the  
key. Edit the name  
key.  
Section 6: Understanding Your Phonebook  
63  
     
6. To delete the number, highlight Delete and press the  
Select soft key or the  
key. Select Yes to confirm  
deletion or No to cancel.  
Using the Service Dialing Numbers  
You can view the list of Service Dialling Numbers (SDN)  
assigned by your service provider. These numbers  
include emergency numbers, directory enquiries and  
voice mail numbers.  
1. When the idle screen displays, press the Ph.book soft  
key.  
2. Select the SDN option by pressing the Up or Down key  
and press the Select soft key or the  
key.  
3. Scroll through the numbers by using the Up or Down  
key.  
4. To dial the number displayed, press the Dial soft key or  
the  
key.  
Note: This function is available only if it is supported by your service  
provider.  
Checking the Memory Status  
You can check how many names and numbers are stored  
in the Phonebook, in both SIM card and the phone  
memory. You can also see the capacity of both memories.  
1. When the idle screen displays, press the Ph.Book soft  
key.  
2. Select the Memory status option by pressing the Up or  
Down key and press the Select soft key or the  
key.  
64  
     
Checking the Memory Status  
3. When you are finished, press the  
soft key or the  
key.  
Section 6: Understanding Your Phonebook  
65  
66  
Section 7: Messaging  
Topics Covered  
• Types of Messages  
• Voice Messages  
• Text Messages  
• Picture Messages  
• Browser Messages  
• Voice mail Messages  
• Broadcast Messages  
• Settings  
• IM (Instant Messaging)  
• Memory Status  
This section allows you to send or receive different types  
ofmessages.Italsoincludesthefeaturesandfunctionality  
associated with messaging.  
Section 7: Messaging  
67  
   
Types of Messages  
Your phone provides the following message types:  
Voice Messages  
Text Messages  
Picture Messages  
Browser Messages  
Voice Mail Messages  
Broadcast Messages (SIM Dependent)  
Voice Messages  
In this menu, you can record a voice memo of up to one  
minute long and then immediately send it by a Picture  
Messaging message.  
Whenyouaccessthismenu,atimerappearsonthescreen.  
1. Press the Record soft key to start recording.  
2. Record a memo by speaking into the microphone.  
The display shows the elapsed time and the remaining  
time at one time.  
3. When you are finished, press the Stop soft key or the  
key. Or, when the recording time is expired, the  
display switches to the next screen.  
4. Choose from the following options and press the Select  
soft key or the  
key:  
Recent log: allows you to select a number or an address  
from the 5 last destinations you entered for sending the last  
messages.  
68  
       
Voice Messages  
Phonebook: allows you to retrieve a number from your  
Phonebook.  
Phone number: allows you to enter the phone number you  
want.  
E-mail address: allows you to enter the e-mail address of  
the recipient.  
Note: You can access the following options by pressing the Options soft  
key:  
Replay: plays back your voice memo.  
Re-record: discards the voice memo and enables you to  
record another one.  
Send: allows you to send the voice memo.  
Default destination: allows you to send the voice message  
directly without entering another destination. To select a default  
destination, press the Select soft key and select from the  
available options.  
Save: saves the voice message and continues to the send  
options.  
5. Enter a number or an e-mail address, or select a  
destination from the Phonebook or Recent log list.  
Press the Select soft key.  
6. When the correct number or address displays, press the  
Select soft key or the  
key.  
7. To add a destination, select Empty and press the Select  
soft key. Repeat from step 4. You can enter up to 10  
destinations.  
If you want to edit the destinations, select one and press  
the Select soft key. You can change or delete it.  
Section 7: Messaging  
69  
8. When you have finished entering the destinations, press  
the Send soft key or the key.  
Your phone sends the message. After sending, the  
message is saved in the Outbox in the Picture messages  
menu.  
Text Messages  
Short Message Service (SMS) allows you to send and  
receive short text messages to and from other mobile  
phones. In addition, your phone supports the Enhanced  
Messaging Service (EMS), which enables you to include  
simple pictures, melodies, and animated images in your  
messages. To use this feature, you must subscribe to your  
service provider’s message service.  
When the Message icon ( ) appears, you have received  
new text messages. When the memory is full, an error  
message displays and you cannot receive any new  
messages. Use the Delete option in each message box to  
delete obsolete messages.  
Create  
In this menu, you can write and send a text message.  
Creating a Simple Text Message  
1. Create your message.  
You can create a message using standard Alphabet  
characters or special Uni-code characters, depending on  
the setting in the Character support menu.  
Notes: For further details about entering characters, see "Using ABC  
You can enter up to 160 standard Alphabet characters in your message.  
70  
     
Text Messages  
When you enter text using Uni-code characters, the maximum number of  
characters that can be in a message is reduced to 70.  
2. When you finish entering your message, press the  
Options soft key. The following options are available:  
Send: allows you to send the message. The message is  
deleted after sending.  
Text formatting: allows you to format the style of the text.  
For the Size attribute, Normal, Large, and Small size are  
available. Mode options are Normal, Underline, and  
Strikethrough. The options for Bold and Italic are Off and On.  
Alignment options are Left, Center, and Right.  
Add content: allows you to add a picture, melody, or  
animation to your message. Select the category of the item to  
be added. In each category, you can select from the various  
factory-set items or choose an item received from other  
sources, such as the Internet or other phones.  
Templates: allows you to apply one of the preset message  
templates to the text. Select one of the 4 items stored in the  
Templates menu.  
Save message: allows you to save a copy of the message  
to the Phone or SIM card.  
3. Select Send and press the Select soft key or the  
key.  
Note: When the phone fails to send the message, it asks you if you want to  
retry. Press the Yes soft key to confirm. Otherwise, press the No soft key  
to return to the message screen.  
Inbox  
Thismessageboxisusedtostoremessagesthatyouhave  
received.  
Section 7: Messaging  
71  
When you enter this menu, the list of messages in the box  
displays with the sender’s phone numbers, or names, if  
available in your Phonebook.  
1. Select a text message from the list and press the  
Options soft key or the  
key.  
Options available are:  
View: read the text message.  
Text reply: create a new message to reply with.  
Call back: dials the number that sent the text message.  
Delete: deletes the text message.  
2. Highlight the View option and press the Select soft key  
or the  
key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
key.  
4. To scroll to the previous or next message, press the Left  
or Right key.  
While reading a message, you can choose the following  
options by pressing the Options soft key:  
Text reply: allows you to send a reply to the sender by sending  
a text message.  
Call back: allows you to call the sender.  
Delete: allows you to delete the message.  
Save address: allows you to extract the sender’s number and  
URL, e-mail addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Forward: allows you to send/resend the message. For further  
information about how to send a message, see "Create" on  
72  
Text Messages  
Select content: allows you to save media items, such as  
sounds or images, from the message into your phone’s  
memory. You can then use the items when writing a message.  
Move to Phone: allows you to move the message from the SIM  
card to the phone’s memory. This option is only available for  
messages stored in the SIM card.  
Move to SIM: allows you to move the message from the  
phone’s memory to the SIM card. This option is only available  
for messages stored in the phone’s memory.  
Outbox  
This message box isused to store messages that you have  
sent or will send.  
When you enter this menu, the list of messages in the box  
displays with the recipients’ phone numbers or names, if  
available in your Phonebook.  
1. Select a text message from the list and press the  
Options soft key.  
2. Highlight the View option and press the Select soft key  
or the  
key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
Navigation key.  
4. To scroll to the previous or next message, press the Left  
or Right Navigation key.  
While reading a message, you can choose the following  
options by pressing the Options soft key:  
Delete: allows you to delete the message.  
Save address: allows you to extract the destination number  
and URL, e-mail addresses or phone numbers from the  
message text, so that you can save them in your phone’s  
memory.  
Section 7: Messaging  
73  
Send: allows you to send/resend the message. For further  
information about how to send a message see "Create" on  
Forward: allows you to send/resend the message. For further  
information about how to send a message, see "Create" on  
Move to phone: allows you to move the message from the SIM  
card to the phone’s memory. This option is only available for  
messages stored in the SIM card.  
Move to SIM: allows you to move the message from the  
phone’s memory to the SIM card. This option is only available  
for messages stored in the phone’s memory.  
Delete All  
This menu allows you to delete all of the text messages in  
each message box. You can also delete all of your  
messages at one time.  
1. To select a text message box to clear, press the Up or  
Down key. To delete all of your messages, select All  
messages.  
2. To place or remove a check mark, press the  
key.  
3. Press the Delete soft key to delete the marked objects.  
4. When the phone asks for confirmation again, press the  
Yes soft key.  
Picture Messages  
This menu allows you to use the Multimedia Message  
Service.  
Picture Messaging is a messaging service that provides  
deliveryofpersonalmultimediamessagesfromphoneto  
phone or from phone to e-mail.  
74  
   
Picture Messages  
In addition to the familiar text content of text messages,  
multimedia messages can contain images, graphics,  
voice, and audio clips. A Picture Messaging message is a  
multimedia presentation in a single file. It is not a text file  
with attachments.  
Using the Picture Messaging feature, your phone can  
receive and send messages that contain multimedia files,  
suchasphotos,soundsandimagesyoudownloadedfrom  
theInternetandvoicememosyourecorded.Thisfunction  
is available only if it is supported by your service  
provider. Only phones that offer multimedia messaging  
features can receive and display multimedia messages.  
Create  
This menu allows you to create a new multimedia  
message and send to one or multiple destinations.  
Creating and Sending a Multimedia Message  
1. When you highlight Subject, press the Add soft key or  
the  
2. Enter the subject of your message and press the OK soft  
key or the key.  
key.  
Note: For more information about entering characters, see "Using ABC  
3. To add a picture, highlight the Picture option and press  
the Add soft key or the  
4. Highlight one of the following options and press the  
Select soft key or the key.  
key.  
Section 7: Messaging  
75  
 
New photo: take a picture with your camera to add to your  
message.  
My photos: takes you to My photos to select a picture to  
add.  
Images: allows you to select a picture from your Images  
folder.  
5. Select a photo or image and press the Add soft key or  
the  
6. To add a sound, highlight the Sound option and press  
the Add soft key or the key.  
7. Highlight one of the following options and press the  
Select soft key or the key.  
key to add the picture to your message.  
Record new: allows you to record a new voice message.  
Voice memos: takes you to the Voice memos folder in your  
Organizer to select a voice memo to add.  
Sounds: allows you to select a sound from your Sounds  
folder.  
8. Select a Sound or Voice memo and press the Add soft  
key or the  
9. To add a message, highlight Message, press the Add  
soft key or the key.  
key to add the picture to your message.  
10. Enter your message and press the Opt. soft key or the  
key.  
11. Highlight the Done option and press the Select soft key  
or the  
key. You may select the Templates option to  
add pre-defined phrases.  
12. Press the Opt. soft key for the following options:  
Send: sends the Picture Messaging message.  
76  
Picture Messages  
Preview: allows you to see the message before you send.  
Add page: allows you to add another page for the Picture  
Messaging message.  
Page timing: page timing allows you to set how long each  
page of the Picture Messaging is displayed. The default time is  
5 seconds, maximum 99 seconds.  
Text effect: allows you to change the color, size, and style of  
the Picture Messaging text.  
Clear picture: allows you to remove the selected picture.  
Delete page: allows you to delete the page selected.  
Save message: allows you to save the Picture Messaging  
message  
13. To change the text or replace the image or sound with  
another one, select a category and press the Opt. soft  
key. Depending on the category selected, highlight Clear  
picture/sound/message/subject to remove the item.  
14. When you have finished creating the message, press the  
Opt. key and choose Send. Press the Select soft key or  
the  
15. Choose one of the following options and press the Select  
soft key or the key:  
key.  
Recent log: allows you to select a number or an address  
from the 5 last destinations you entered for sending the last  
messages.  
Phonebook: allows you to enter the phone number you  
want.  
Phone number: allows you enter a phone number or  
choose one from the Ph.Book.  
E-mail address: allows you to enter the e-mail address of  
the recipient.  
Section 7: Messaging  
77  
My Album: allows you to send the message to the My Album  
folder.  
My Journal: allows you to send the message to My Journal.  
16. Press the Send soft key to send the message. Your  
phone sends the message.  
Inbox  
Viewing a Message When You Receive It  
When a new multimedia message comes in, the display  
shows the Picture Messaging Message icon.  
1. Press the View soft key to view the message.  
Press the Exit soft key if you want to view the message  
later in the Inbox.  
2. Press the Opt. soft key or the  
key to access the  
following options:  
Reply: allows you to create a message and reply to the  
sender.  
Reply all: allows you to create a message and reply to the  
sender and all numbers he originally sent the message to.  
Replay: if there are multiple screens to this message, allows  
you to replay the message from the beginning.  
Delete: deletes the message.  
Forward: allows you to forward this message to another  
destination.  
Call back: allows you to dial the number from which this  
message was sent.  
Save content: allows you to save the contents of this  
message (picture or sound) to send to another destination in a  
different message.  
78  
Picture Messages  
Save address: allows you to store the address from which  
this message was sent. You can also reply to the message  
from this option.  
Properties: shows you information about the message, such  
as the sender’s e-mail address or phone number, message  
size, recipient’s e-mail address or phone number, priority,  
class, and the time and date the message was received.  
3. When you are finished, press the  
key.  
Viewing a Received Message in the Inbox  
When you access the Inbox menu, a list of multimedia  
messages you received displays along with the message  
subjects. The icons on the left tell you the status of the  
messages.  
Picture Messaging notifications that have been opened.  
Picture Messaging notifications that have not been opened.  
1. Select a message on the list and press the Select soft  
key or the  
key.  
The message displays and scrolls to the next page, if it  
has one, after a specified time.  
2. To scroll through the message, press the Up or Down  
Navigation key. If the message has more than one page,  
you can scroll through the pages by using the Left and  
Right Navigation keys.  
While viewing a message, you can choose the message  
options by pressing the Opt. soft key.  
Section 7: Messaging  
79  
Outbox  
When you access this menu, the list of multimedia  
messages that you have sent or saved displays. The icons  
on the left tell you the status of each message:  
Messages sent  
Messages currently being sent  
Messages your phone couldn’t send  
Messages to be sent  
Messages deferred  
1. Select a message on the list and press the Select soft  
key or the  
key.  
The message displays and scrolls to the next page, if it  
has one, after a specified time.  
2. To scroll through the message, press the Up or Down  
Navigation key. If the message has more than one page,  
you can scroll through the pages by using the Left and  
Right Navigation keys.  
While viewing a message, you can choose the following  
options by pressing the Opt. soft key:  
Delete: allows you to delete the message.  
Replay: allows you to replay the message from the beginning.  
Send: allows you to send/resend the message.  
Properties: shows you information about the message, such as  
the time and date, to (recipient number), size, priority, and  
class.  
80  
 
Browser Messages  
Draft  
After creating a multimedia message, you can store it in  
this message box to be sent at a later time.  
For further details about viewing a message in the  
Delete All  
This menu allows you to delete all of the multimedia  
messages in each message box separately. You can also  
delete all of your messages at one time.  
1. To select Picture messages to clear, press the Up or  
Down key.  
2. Highlight the message box. Press the Select soft key or  
the  
key. To delete all of your messages, select All  
messages.  
3. To remove a check mark, press the  
key.  
4. To delete the marked messages, press the Delete soft  
key. When a confirmation message displays, press the  
Yes soft key to confirm.  
Browser Messages  
This menu allows you to receive web messages from the  
server, or to set the phone not to receive Web messages.  
The following options are available:  
Inbox: allows you to read the messages received from the web  
server.  
Receive: allows you to set whether or not your phone receives  
web messages.  
Delete all: allows you to delete all of the web messages.  
Section 7: Messaging  
81  
   
Voice Mail Messages  
This menu provides you with a way of accessing your  
voice mailbox, if provided by your network.  
The following options are available:  
Call voice mail: before using the Voice Mail feature, you must  
enter the voice server number obtained from your service  
provider. You can then select this option and press the Select  
soft key or the  
key to listen to your messages.  
You can connect to the voice server by pressing and holding the  
1 key in Idle mode.  
Voice server number: allows you to change the voice mail  
server number, if necessary.  
Note: Voice mail is a network feature. Please contact your service provider  
for further details.  
Broadcast Messages (SIM Dependent)  
This network service allows you to receive text messages  
on various topics, such as the weather or traffic.  
Please contact your service provider for further details.  
Settings  
In this menu, you can set up default text message and  
picture message information. The last setting you  
accessed is automatically activated for sending  
subsequent messages.  
Text Messages  
Service center: allows you to store or change the number of  
your message center, which is required when sending  
82  
         
Settings  
messages. You must obtain this number from your service  
provider.  
Validity period: allows you to set the length of time your text  
messages are stored at the message center while attempts are  
made to deliver them.  
Message type: allows you to view the type of message sent.  
Reply path: allows the recipient of your message to send you a  
reply message using your message center, if your network  
supports this service.  
Delivery report: allows you to activate or deactivate the report  
function. When this function is activated, the network informs  
you whether or not your message has been delivered.  
Character support: allows you to select a character encoding  
type, either GSM-alphabet, Uni-code, or Automatic. If you  
select Automatic, the phone automatically changes the  
encoding type from GSM-alphabet to Uni-code when you enter  
a Uni-code character.  
When you select Uni-code, the maximum number of  
characters which can be in a message is 70. If your  
recipient’s phone does not support Uni-code characters,  
he/she may not be able to read your message correctly.  
Note: If your phone doesn’t have the Character support menu, the phone  
provides the Automatic character encoding by default.  
Picture Messages  
The following options are used to set Send and Receive  
settings for Picture messages.  
Send Settings  
Priority: you can select the priority level of your messages.  
Section 7: Messaging  
83  
Validity period: set the length of time your messages are  
stored in the message center while the network attempts to  
deliver them.  
Delivery after: you can set a delay time before the phone sends  
your messages.  
Delivery report: when this option is enabled, the network  
informs you whether or not your message has been delivered.  
Read reply: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
Receive Settings  
Msg. reception: you can set your phone to automatically  
receive incoming messages.  
Ads reject: you can set your phone to automatically reject or  
receive advertising messages.  
Report allowed: you can set the option to receive a delivery  
report.  
IM (Instant Messaging)  
Instant Messenger (IM) is a way of sending short, simple  
messages that are delivered immediately to users online  
at that moment.  
Before using this feature, you need to subscribe to a  
messenger service. For further details, contact your  
service provider.  
Starting your IM  
1. Select the messenger service to which you subscribed  
using the Left or Right key and press the Select soft key  
or the  
key.  
2. Enter your screen name. The name will be displayed on  
other people’s phones or PCs.  
84  
   
Memory Status  
3. Press the Down key and enter your password in the  
password textbox.  
4. Press the Options soft key.  
5. Highlight the Sign In option and press the Select soft  
key or the  
account.  
key. You will be logged onto your IM  
Using the Instant Messenger Options  
Onthesign-onscreenofthemessenger,presstheOptions  
soft key to access the following options:  
Sign On: allows you to login to your IM account.  
Saved Conversations: shows the records of your connections  
to the messenger service.  
Memory Status  
You can check the amount of the memory being used and  
the memory remaining for multimedia messages.  
The display shows the total space including the used and  
freespace.Youcanalsoviewhowmuchspaceiscurrently  
occupied by each message box.  
Section 7: Messaging  
85  
 
86  
Section 8: Changing Your Settings  
Topics Covered  
• Time & Date Settings  
• Display Settings  
• Sound Settings  
• Get More Help  
• Greeting Message Settings  
• Language Settings  
• Security Settings  
• Slide Settings  
• Infrared Activation Settings  
• Extra Settings  
• Reset Settings  
• Network Services Settings  
This section explains the sound and phone settings for  
yourphone.Itincludesdisplaysettings,securitysettings,  
slide settings, infrared portal settings, and extra settings  
associated with your phone.  
Section 8: Changing Your Settings  
87  
   
Time & Date  
Thismenuallowsyoutochangethecurrenttimeanddate  
displayed. You can alsofind out what time it is in another  
part of the word.  
The following options are available:  
Set date  
The Set date option allows you to enter the month, day,  
and year.  
World time  
The World time option allows you to set your time zone,  
using the Left and Right Navigation keys.  
The screen shows the:  
city name.  
current time and date.  
city selected as your time zone.  
To select your time zone:  
1. Select the city corresponding to your time zone by  
pressing the Left or Right key one or more times. The  
local time and date display.  
2. Press the Set soft key or the  
Set time  
key.  
The Set time option allows you to enter the current time.  
YoucanchoosethetimeformatintheTimeformatmenu.  
88  
   
Display Settings  
Time format  
This option allows you to set the time format to 12 hours  
or 24 hours.  
Auto update  
The Auto update option allows you to receive time  
informationfromyourserviceprovider’snetwork.Auto  
update options are:  
Off: you need to manually set the time and date according to  
the current time zone using the Time & Date menu.  
On: the phone automatically updates the time and date  
according to the current time zone using the network service.  
Confirm first: the phone asks for a confirmation before the  
update.  
Note: Automatic updates of time and date do not change the time you have  
set for alarm settings or calendar memos.  
Display Settings  
In this menu, you can change various settings for the  
display or backlight.  
Wallpaper  
Thismenuallowsyoutochangethebackgroundimageor  
the color of the text to be displayed in Idle mode.  
The following options are available:  
Animations: you can select a background image to be  
displayed on the idle screen.  
Section 8: Changing Your Settings  
89  
   
Get More Wallpapers: You can also select any images  
downloaded from the Internet, t-zonesSM and optional  
EasyStudio 1.0 program, or received in messages.  
My photos: you can select a background from the photos you  
have taken.  
Images: you can select a background from the phones  
preloaded images.  
Text color: you can select the phone’s display text color and  
shading.  
To change the background image:  
1. Scroll through the list by pressing the Navigation keys.  
You have various preset images available.  
2. Press the Select soft key or the  
key when the image  
you want highlights.  
Display  
You can select the color of the menus displayed.  
Backlight  
In this menu, you can select the length of time the  
backlight is on and the phone is in Dimming mode.  
Settings available are: 15 seconds, 30 seconds, 1 minute, 3  
minutes, and 10 minutes.  
Brightness Control  
You can adjust the brightness of your display to see it  
better in different lighting conditions.  
Press the Up or Down Navigation key or press the  
Volume keys to adjust the brightness.  
90  
 
Sound Settings  
Dialing Font Color  
This menu allows you to select the color of your dialing  
font. You can choose a variety of colors. Highlight the  
coloryouwantandpresstheSelectsoftkeyorthe  
key.  
Sound Settings  
You can customize various sound settings.  
My MegaTones  
This menu displays the different ringtones you have  
downloaded from the Internet.  
Get More MegaTones  
This menu allows you to download different ringtone  
melodies from the Internet. To enable a downloaded  
ringtone, use the Ringtone option.  
Ringtones  
This menu allows you to select a ring melody. You can  
choose between many different melodies.  
Ring Volume  
This menu allows you to adjust the ring volume to one of  
five levels.  
UsetheUpandDownkeysortheVolume keysontheleft  
side of the phone to increase or decrease the volume.  
Alert Type  
This menu allows you to specify how you are to be  
informed of incoming calls.  
The following options are available:  
Section 8: Changing Your Settings  
91  
     
Melody: the phone rings using the ring melody selected in the  
Ringtone menu.  
Vibration: the phone vibrates but does not ring.  
Vibration then melody: the phone first vibrates 3 times and  
then starts ringing.  
Keypad Tone  
This menu allows you to select the tone that the phone  
sounds when you press a key.  
To turn off the sound, select Off.  
Message Tone  
This menu allows you to set up the ringer for incoming  
messages, text messages, and Picture messages.  
Power On/Off  
This menu allows you to select the melody that the  
phone sounds when it is switched on and off.  
To turn off the sound, select Off.  
Alerts on Call  
Thismenuallowsyoutochoosewhetherornotthephone  
informsyouwhenyoureceiveanewmessageorwhenthe  
time for an alarm comes during a call.  
The following options are available:  
Off: the phone doesn’t actively alert you to incoming messages  
or alarms. It only displays the corresponding notification.  
On: the phone alerts you with a beep and displays the  
corresponding notification.  
92  
     
Get More Help  
Silent Mode  
This menu allows you to choose whether or not your  
phone will vibrate when a call is received while in Silent  
Mode. You may set your phone to Vibration or Mute.  
Extra Tones  
You can customize additional tones for the phone.  
The following options are available:  
Indicative tones: sets whether or not the phone informs you  
when you make a mistake.  
Minute minder: sets whether or not the phone beeps every  
minute during an outgoing call to keep you informed of the  
length of your call.  
Connect tone: sets whether or not the phone beeps when your  
call is connected to the system.  
Note: To turn a given tone on, press the Select soft key or the  
key. A  
check mark displays in front of the option. To turn a given tone off, press  
the Select soft key or the  
key. The check mark no longer displays in  
front of the option.  
Get More Help  
Thismenuprovidesonlinehelpforyourphone. Youmay  
browsegeneralhelptopics,orenterspecificsearchtopics.  
Information located on this site is maintained by  
T-Mobile.  
Greeting Message  
This menu allows you to set a greeting to be displayed  
briefly when the phone is switched on.  
Section 8: Changing Your Settings  
93  
       
For details about entering characters, see "Using ABC  
Language  
ThismenuallowsyoutoselectadisplaylanguageforText  
language and Input mode. Choose from English, French,  
and Spanish.  
Security  
The Security feature enables you to restrict the use of  
your phone by others and to restrict the types of calls.  
Various codes and passwords are used to protect the  
features of your phone.  
PIN Check  
When the PIN Check feature is enabled, you must enter  
your PIN each time you switch on the phone.  
Consequently, any person who does not have your PIN  
cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the network when you  
switch it on.  
Enable: you must enter the PIN each time the phone is  
switched on.  
94  
         
Security  
Change PIN  
This feature allows you to change your current PIN,  
providedthatthePINCheckfeatureisenabled.Youmust  
enter the current PIN before you can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone Lock  
When the Phone lock feature is enabled, the phone is  
locked and you must enter the 4- to 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the factory. To  
change the phone password, see "Change Password" on  
Once the correct password has been entered, you can use  
the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone password when  
you switch on the phone.  
Enable: you are required to enter the phone password when  
you switch on the phone.  
Change Password  
The Change Passwordfeature allows you to change your  
currentphonepasswordtoanewone. Youmustenterthe  
current password before you can specify a new one.  
The password is preset to “00000000” at the factory. Once  
you have entered a new password, you are asked to  
confirm it by entering it again.  
Section 8: Changing Your Settings  
95  
   
Privacy  
Using this menu, you can lock your media contents, such  
as picture messages, Voice messages, Voice list, images,  
andsounds.Onceyouhavelockedthecontents,youmust  
enter the phone’s password to access the associated  
menus.  
1. To select an item to lock, press the Up or Down key. To  
lock all of the contents, select All.  
2. To place a check mark, press the Select soft key or the  
key.  
3. To remove a check mark, press the Select soft key or  
the  
key.  
4. To lock the marked items, press the OK soft key.  
5. Enter a password and press the OK key.  
When the phone asks for the password, enter the  
password and press the OK soft key or the  
key.  
Note:Thepasswordispresetto00000000atthefactory.  
Tochangethispassword,see"ChangePassword"onpage  
FDN Mode  
FDN (Fixed Dial Number) mode, if supported by your  
SIM card, allows you to restrict your outgoing calls to a  
limited set of phone numbers.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in Phonebook.  
You must enter your PIN2. The following options are available:  
96  
Slide Settings  
Full length entries or wild cards can be entered in to the FDN  
list.  
A full length number with a specific contact name can be  
entered into the FDN list.  
Wildcard entries allow a range of numbers to be dialed with a  
single entry: ex. 555 – All dialed numbers that begin with 555  
will be allowed. Numbers that do not match the conditions in  
the FDN list will be restricted. Note: Entering an asterisk (*) is  
not required for wild card entries.  
Change PIN2  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
item does not display.  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by  
entering it again.  
Slide Settings  
You can set which features the slide performs when you  
move it up or down.  
Up: allows you to set whether moving the slide up accepts a  
call.  
Down: allows you to select whether moving the slide down  
stops the current operation.  
Section 8: Changing Your Settings  
97  
 
Infrared Activation  
This feature allows you to send or receive data to or from  
IrDA-compatible computers or phones through the  
infrared port on your phone.  
Sending or Receiving Data from a PC  
Touse an infrared connection with a computer, you must:  
Install EasyStudioTM software on your computer.  
Configure and activate an IrDA-compliant infrared port on your  
computer.  
Activate the infrared feature on the phone; the IrDA icon  
appears on the top line of the display.  
Align the IrDA port on the phone with the IrDA port on your  
computer.  
The connection is ready for data transmission.  
Ifthereisnocommunicationbetweenyourphoneandthe  
IrDA-compliant device within 30 seconds of activating  
the feature, it is automatically deactivated.  
98  
   
Extra Settings  
Note: For optimal performance, use an optional data link cable. You can  
purchase one from your local Samsung dealer.  
Sending or Receiving Data from Another Phone  
To send or receive Address Book entries and calendar  
memosfromanothercompliantphoneusingtheinfrared  
connection,youneedtoactivatetheinfraredportonyour  
phone.  
Note: If you receive a call while sending or receiving data, you can either  
answer or reject the call without interrupting the IrDA connection. But,  
picking up your phone may break the connection between the phones, so  
use the headset to answer the call.  
1. Align the infrared ports on both phones with each other.  
2. In Idle mode, press the Menu soft key and select  
Settings. Highlight Infrared activation and press the  
Select soft key or the  
key.  
3. Highlight On and press the Select soft key or the  
key.  
4. If FDN (Fixed Dial Number) mode is enabled on your  
phone, enter the PIN2 and press the OK soft key.  
5. Press the Save soft key. The entries are saved.  
Extra Settings  
You can turn the automatic redialing or answering  
features on or off.  
1. To turn a feature on, press the Select soft key or the  
key. A check mark displays in front of the option.  
Section 8: Changing Your Settings  
99  
   
2. To turn a feature off, press the Select soft key or the  
key. The check mark no longer displays.  
The following options are available:  
Note: The interval between call attempts varies.  
Auto redial: when this option is checked, the phone makes up  
to ten attempts to redial a phone number after an unsuccessful  
call.  
Anykey answer: when this option is checked, you can answer  
an incoming call by pressing any key, except the  
key or  
the Reject soft key. To reject the call, press the  
Reject soft key.  
When this option is unchecked, you must press the  
Accept soft key to answer a call.  
key or the  
key or  
Reset Settings  
From this menu you can reset your phone and sound  
settings to the default settings.  
To reset your phone:  
Enterthe4-to8-digitpasswordandpresstheOKsoftkey  
or the  
key.  
The password is preset to “00000000.” To change this  
Network Services Settings  
Call Forwarding  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
100  
       
Network Services Settings  
Example: You may wish to forward your business calls to a colleague  
while you are on holiday.  
To set your call forwarding options:  
1. Select a call forwarding option by pressing the Up or  
Down key and then press the Select soft key or the  
key.  
The following options are available:  
Forward always: all calls are forwarded.  
Busy: calls are forwarded when you are already on another  
call.  
No reply: calls are forwarded when you do not answer the  
phone.  
Unreachable: calls are forwarded when you are not in an  
area covered by your service provider or when your phone is  
switched off.  
Cancel all: all call forwarding options are canceled.  
2. Select the type of calls, voice or data, by pressing the Up  
or Down key, and then press the Select soft key or the  
key.  
The current status displays. If the option has already  
been set, the number to which the calls are forwarded  
displays.  
3. To activate call forwarding, press the Activate soft key.  
Go to step 6.  
4. To change the number to be called, press the Change  
soft key. Go to step 6.  
Section 8: Changing Your Settings  
101  
5. To deactivate call forwarding, press the Remove soft  
key.  
6. Enter the number to which the calls are to be forwarded  
and press the OK soft key or the  
key.  
To enter an international code, press and hold the 0 key  
until the + sign displays.  
7. When you select No reply in step 1, select the length of  
time the network waits before forwarding a call.  
The phone sends your settings to the network and the  
network’s acknowledgement displays.  
Call Waiting  
Thisnetworkserviceinformsyouwhensomeoneistrying  
to reach you during another call.  
You can specify individual call waiting options for voice  
calls and/or data calls.  
To set your call waiting options:  
1. Select the type of calls, voice or data, to which the call  
waiting option is to be applied by pressing the Up or  
Down key and then press the Select soft key or the  
key.  
The screen informs you whether call waiting is activated  
or deactivated.  
2. You can activate or deactivate the Call Waiting feature  
using the Activate or Deactivate soft key respectively.  
3. To return to the previous screen, press the Exit soft key.  
102  
 
Network Services Settings  
Network Selection  
The Network Selection feature enables you to  
automaticallyormanuallyselectthenetworkusedwhen  
roaming outside of your home area.  
Note: You can select a network other than your home network only if there  
is a valid roaming agreement between the two.  
The following Network Selection options are available:  
Search now  
Default setup  
To change network selection mode using the Search now  
option:  
1. Press the Up or Down key until the Search now option  
is highlighted, then press the Select soft key or the  
key.  
2. Your phone will scan for available networks. Press the  
Up or Down key until the network you want is  
highlighted, and then press the Select soft key or the  
key.  
The phone will scan for that network and you will be  
connected.  
To change network selection mode using the Default  
setup option:  
1. Press the Up or Down key until the Default setup option  
is highlighted, then press the Select soft key or the  
key.  
Section 8: Changing Your Settings  
103  
 
Select either the Automatic or the Manual option. If you  
select Automatic, you are connected to the first  
available network when roaming.  
If you select Manual, go to step 2.  
2. Your phone will scan for available networks. Press the  
Up or Down key until the network you want is  
highlighted, and then press the Select soft key or the  
key.  
The phone will scan for that network and you will be  
connected.  
Caller ID  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow you to change this setting.  
The following options are available:  
Default: the default setting provided by the network is used.  
Hide number: your number does not display on the other  
person’s phone.  
Send number: your number is sent each time you make a call.  
Band Selection  
This menu option provides the ability to set the band for  
your phone. Choose from GSM 850/1900, GSM 1800, or  
Automatic.  
104  
   
Section 9: Organizer  
Topics Covered  
• Alarm  
• Calendar  
• Calculator  
• To Do List  
• Voice memo  
• Conversion  
• Timer  
• Stopwatch  
The topics covered in this section allow you to schedule  
appointments,viewthecalendar,createTo-Dolists,setan  
alarm, and perform simple math calculations.  
Section 9: Organizer  
105  
 
Alarm  
This feature allows you to:  
set the alarm to ring at a specific time.  
set the phone to switch on automatically and ring the alarm  
even if the phone is switched off.  
The following options are available:  
Wake-up Call: the alarm rings to wake you up in the morning.  
Alarm1: set the day, time, and tone for this alarm.  
Alarm2: set the day, time, and tone for this alarm.  
Auto power: alarm rings at the specified time even if the phone  
is turned off. If the option is set to Off and the phone is  
switched off at the specified time, the alarm does not ring.  
To set the alarm:  
1. From idle mode, select: Menu mode, Organizer, Alarm.  
2. Choose the type of alarm to be set and press the Select  
soft key or the  
key.  
3. Press the Options soft key to choose from the following  
options:  
Alarm day: select the days of the week for the alarm.  
Alarm time: enter the time for the alarm.  
Alarm tone: select an alarm melody.  
Remove alarm: removes the set alarm.  
4. Highlight Alarm day and press Select soft key or the  
key. Select the days you would like the alarm to sound.  
Highlight the day and press the Select soft key or the  
key. Press the OK soft key to save.  
106  
   
Calendar  
5. Enter the time for the alarm to sound and press the OK  
soft key.  
6. Select AM or PM and press the Select soft key or  
key.  
7. Press the Options soft key, highlight Alarm tone, and  
press the Select soft key or the  
choice and press the Select soft key or the  
8. Press the key to return to Idle mode.  
key. Highlight your  
key.  
Note: Your phone is preset to a 12-hour format. To change the time  
9. To stop the alarm when it rings, open the phone and  
press the Confirm soft key, Volume keys, C key,  
key,  
or  
key.  
Calendar  
With the Calendar feature, you can:  
consult the calendar and check your memos.  
write memos to keep track of your schedule.  
set an alarm to act as a reminder, if necessary.  
Consulting the Calendar  
When you select the Calendar menu, the calendar  
displays with today’s date highlighted. The following  
options are available when you press the Options soft  
key:  
Add memo: allows you to write a memo and save it to the  
scheduler, to do list, call, or anniversary list.  
Section 9: Organizer  
107  
   
Go to date: allows you to jump to a specific date.  
View all: displays all memos set, starting with the oldest,  
regardless of the day. To scroll through the memos, press the  
Up or Down key.  
Delete day: allows you to delete all memos for the specified  
day.  
Delete all: allows you to delete all of the memos. You are asked  
to confirm your action.  
Writing a Memo  
You can make up to 100 memos for the calendar. More  
than one memo can be made for one day.  
To write or edit a memo on a specific date:  
1. Select a date on the calendar, using the Navigation keys.  
Note: To skip to the previous or next month, press the Up or Down key 1 to  
6 times.  
2. Press the  
key.  
An empty memo screen displays to allow you to enter  
your memo.  
3. Enter your memo and then press the OK soft key or the  
key.  
Note: For further details about how to enter characters, see "Using ABC  
4. Choose from the following Save to options:  
Scheduler: saves the memo to the Scheduler.  
To do list: saves the memo to the To do list.  
Call: saves the memo to your Call list.  
108  
 
Calendar  
Anniversary: saves the memo to your Anniversary list.  
5. If you saved to Scheduler or To do list, the Memo time  
menu will appear. Enter the time you wish. The time will  
default to the present time. Press the OK soft key or the  
key.  
6. If applicable, select the AM or PM option and press the  
Select soft key or the  
key.  
7. You are asked if you wish to set an alarm. If you want  
the alarm to ring on the chosen day, press the Yes soft  
key or the  
Otherwise, press the No soft key. The memo is saved.  
8. If you pressed the Yes soft key or the key, set the  
key.  
time for the alarm and press the OK soft key or the  
key.  
Notes: Your phone is preset to a 12-hour format. To change the time  
When the alarm time you set occurs, the alarm rings. To view details about  
the memo, press the Confirm soft key or the  
key. To stop the alarm,  
press the  
key.  
9. If applicable, select the AM or PM option and press the  
Select soft key or the key.  
10. Select an alarm tone for the alarm and press the Select  
soft key.  
The color of the date on the calendar changes to pink to  
indicate that a memo exists for that date.  
Section 9: Organizer  
109  
Viewing a Memo  
When you select a day on which more than one memo  
exists, the latest memo for the day displays.  
In that case, press the Right or Left key to scroll to the  
previous or next memo.  
You can access the following options by pressing the  
Options soft key:  
Add: allows you to add a new memo for the day.  
Delete: deletes the memo.  
Edit: allows you to change the memo text.  
Move: allows you to change the time or date of the memo.  
Copy: allows you to copy the memo to another date or time.  
Calculator  
With this feature, you can use the phone as a calculator.  
The calculator provides the basic arithmetic functions;  
addition, subtraction, multiplication, and division.  
1. Enter the first number using the numeric keys.  
To enter a decimal point, press the key.  
Note: To include a decimal point, press the key. To include a bracket,  
repeatedly press the key until the symbol you want displays.  
2. Enter the operation for your calculation by repeatedly  
pressing the key until the operation you want displays.  
3. Enter the second number.  
4. To view the result, press the = soft key or the  
key.  
110  
     
To Do List  
Repeat steps 1 to 4 as many times as required.  
To Do List  
This feature allows you to:  
enter a list of tasks to be done.  
Creating the To Do List  
1. Press the Select soft key or the  
key.  
2. Enter the first task.  
Note: For further details about how to enter characters, see "Using ABC  
3. Press the OK soft key or the  
key.  
4. Select a date and press the Select soft key or the  
key. Enter a time and press the OK soft key or the  
key. Highlight AM or PM and press the Select soft key or  
the  
key.  
5. To edit the To Do List, use the following options.  
Editing the To Do List  
When you select the To do list menu, the current contents  
displaywithastatusmark,ifthetaskhasbeendone ,or  
is undone  
1. To change the status of a task, highlight Mark and press  
the Select soft key or key.  
.
2. Use the Up or Down Navigation key to mark the task as  
Done or Undo.  
By pressing the Options soft key or the  
key on the list  
or the task view, you can access the following options:  
Section 9: Organizer  
111  
   
Add: allows you to create a new task.  
Mark: allows you to change the status of the current task to  
either Done or Undo.  
Edit: allows you to change the text for the current task.  
Move: allows you to move the task to another date.  
Copy: makes a copy of the current task.  
Delete: deletes the current task.  
Delete all: allows you to delete all of the tasks.  
Voice Memo  
You can record voice memos. After recording, you can  
send the memo to other people via the Multimedia  
Message Service.  
Record Voice  
This menu allows you to record a new memo.  
1. To start recording, press the Select soft key or the  
key.  
2. Record a memo by speaking into the microphone.  
3. When the selection is on Stop, press the Select soft key  
or the  
key, or if the recording time expires, the  
following options display:  
Send: send the voice memo by Picture Messaging.  
Rename: change the name of the voice memo.  
Delete: delete the voice memo.  
Properties: view the properties of the voice memo.  
4. To exit, press the soft key or the  
key.  
112  
     
Voice Memo  
Voice Memos  
This menu shows a list of saved voice memos. Scroll to a  
memo and press the Select soft key or the key. Then,  
press the Options soft key. The following options are  
available:  
Send: allows you to send the memo to other people by using  
the Picture Messaging feature. See "Creating and Sending a  
Multimedia Message" on page 75 for further details about  
sending a message.  
Rename: allows you to change the memo’s name.  
Delete: allows you to delete the memo.  
Properties: displays information about the memo, such as the  
name, size, and format.  
Delete All  
In this menu, you can delete all of your voice memos.  
When the confirmation message appears, press the Yes  
soft key. To cancel the deletion, press the No soft key.  
Settings  
In this menu, you can view and set the settings for your  
voice memos. The following options are available:  
Recording time: allows you to set the recording time to Normal  
or Limit size (for Picture Messaging).  
Volume: allows you to set the default volume for the recording.  
Default name: allows you to set the default name for the  
recordings.  
Memory Status  
You can check the amount of memory being used and the  
memory remaining for voice memos.  
Section 9: Organizer  
113  
 
The display shows you the total, used, and free memory.  
Conversion  
The conversion menu provides the following conversion  
categories:  
Length  
Weight  
Volume  
Area  
Temperature  
To convert a length, weight, volume, area, or  
temperature, do the following:  
1. Scroll to the conversion feature you wish to use and  
press the Select soft key or the  
key.  
2. Enter the quantity you want converted.  
Note: To include a decimal point, press the key.  
3. Use the Up, Down, Left, and Right keys to select the  
From and To units of measure for the quantity you want  
converted.  
4. Press the OK soft key or the  
key.  
Timer  
You can use this menu to set a timer. To enable the Timer,  
use the following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
114  
     
Stopwatch  
3. Press the Start soft key to start the timer. Press the Stop  
soft key to stop the timer.  
Stopwatch  
You can use this menu to set a stop watch. Press the OK  
softkeytostartthestopwatch.PresstheOKsoftkeyatthe  
start of each succeeding event/lap to record the  
completion time for the previous event/lap. Press the  
Resetsoftkeytoeraseallstopwatch(lap)timesrecorded.  
Section 9: Organizer  
115  
 
116  
Section 10: Camera  
Topics Covered  
• Using the Camera  
• Take and Send  
• Accessing Pictures in My Photos  
• Accessing Pictures in My Album  
• My Journal  
• Delete All  
• Settings  
• Memory Status  
This section explains how to use the camera in your  
phone. You can take a photo using the built-in camera.  
Section 10: Camera  
117  
   
Using the Camera  
Using the camera module in your phone, you can take  
photos of people or events while on the move.  
Additionally, you can send photos to other people in a  
PictureMessagingmessageorsetawallpaperorcallerID  
image.  
Caution:  
Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another  
person’s privacy.  
Take and Send  
Your camera produces photos in JPEG format.  
Note: When you take a photo in direct sunlight or in bright conditions,  
shadows may appear on the photo.  
1. In Idle mode, press the Up key or press and hold the  
key on the right side of the phone to turn on the camera.  
You can also press the Menu soft key to access Menu  
mode. Highlight Camera and press the Select soft key or  
press the  
2. Adjust the image by aiming the camera at the subject.  
Press the right soft key to access the camera  
key. Select Take and Send.  
options. For details, see "Using Camera Options" on  
You can use the keypad to quickly change the camera  
options.  
118  
   
Take and Send  
3. Press the left  
soft key or the  
key to take the  
photo. Send To: My Album? is displayed. Press the Yes  
soft key.  
4. To use the photo options, press the Options soft key or  
the  
key.  
5. To return to Capture mode, select New Photo.  
6. To return to Idle mode, press the  
key.  
Using Camera Options  
In Capture mode, you can use various options for the  
camera by pressing the soft key.  
The following options are available:  
Mode:allowsyoutotakeaphotoinvariousmodes. Once  
you change the mode, the corresponding indicator  
appears at the top right of the display.  
Normal shot: allows you to take a photo in the normal mode.  
Multi-shot: allows you to take a series of action stills. Select  
the capture speed, High Speed or Normal Speed, and the  
number of photos the camera will take. When you press the  
key, the camera takes photos successively.  
Night mode: allows you to take photos in low (night time)  
lighting.  
Capture only: allows you to take a photo and it automatically  
saves and returns you to the capture screen.  
Frame: allows you to select a decorative frame. Select a  
frame from the list using the Navigation keys and press  
the  
key to save your setting.  
Effects: allows you to change the color tone or apply  
special effects to the photo.  
Section 10: Camera  
119  
 
Rotation: allows you to rotate the image vertically and  
horizontally.  
Timer: allows you to set a time delay before the camera  
takesthephoto.Selectthelengthofdelayyouwant.When  
youpressthe or  
the specified time.  
key,thecameratakesthephotoafter  
Settings: allows you to change the image settings.  
Photo size: allows you to set the image size to either 640x480,  
320x240, 160x120, or 128x120. The icon for the selected  
image size (640x480), (320x240), (160x120), (128x120)  
displays on the capture screen.  
Shutter sound: allows you to select a tone for the shutter  
sound.  
Flash light: allows you to set the flash for Manual or Automatic  
operation. The built-in flash may enable you to take pictures in  
low light. The flash is located on the rear of the phone, next to  
the camera lens.  
Default name: allows you to change the default name assigned  
to your photo.  
Help: shows you how the Navigation keys and Volume  
keys can adjust image brightness and zoom while in  
capture mode.  
adjusts the image brightness  
zooms in or out  
flips the image vertically  
shows the mirror image  
120  
 
Accessing Pictures in My Photos  
Camera Shortcuts  
The following keys are camera shortcuts that can be used  
during the capture mode.  
changes from full screen view to panoramic view.  
changes the picture resolution.  
displays the Help screen.  
changes the camera shot mode  
changes the color tone or applies a special effect to the photo.  
opens the Settings options. See page 120 for details.  
selects a decorative frame.  
sets a time delay.  
takes you to My Photos menu.  
manually turns the flash on or off.  
Accessing Pictures in My Photos  
1. In Idle mode press the Menu soft key to access the  
Menu mode.  
2. Highlight Camera and press the Select soft key or the  
key.  
3. Select My photos and press the Select soft key or the  
key.  
When you access this menu, your phone displays the  
Section 10: Camera  
121  
 
photos in Thumbnail mode, which shows them as small  
images. Use the Navigation keys to scroll through the  
photos.  
4. To view the photos on the full screen, press the View or  
the  
Multi soft key or the  
5. Press the Options soft key to use the following options:  
key. To go back to Thumbnail mode, press the  
key.  
My Photos Options  
Send to My Album: allows you to send the photo to My  
Album on the Internet.  
Default destination: allows you to remove, replace, or  
edit your default destination.  
Send: allows you to send the photo as part of a Picture  
Messaging message.  
Set as: allows you to set the photo as your Wallpaper or  
Caller ID image for an entry in the Address Book.  
Rename: allows you to change the name of the photo.  
Delete: allows you to delete the photo.  
Protection: allows you to protect the photo from being  
deleted.  
Properties:showstheproperties of the photo, such as the  
file name, file size, image resolution, protection status,  
and file format.  
Deleting a Photo  
You can delete photos one by one or all at one time.  
1. From the My Photos menu, select the photo you want to  
delete and press the View soft key or the  
key.  
122  
Accessing Pictures in My Album  
2. Press the Options soft key and select Delete.  
3. Press the Yes soft key to confirm the deletion.  
4. When you have finished, press the  
key.  
Accessing Pictures in My Album  
This menuprovidestheabilityforyoutoviewthephotos  
you have stored on the t-zone browser. Use the following  
procedures to access My Album.  
1. In Idle mode press the Menu soft key to access the Menu  
mode.  
2. Highlight Camera and press the Select soft key or the  
key.  
3. Select My Album and press the Select soft key or the  
key. The browser is launched and the My Albums  
Menu displays.  
4. Photos sent to this folder are stored in the Inbox Album.  
Press the Select soft key to view the photos.  
5. Press the  
key to exit t-zones and return to the Idle  
screen.  
My Journal  
This menu provides the ability for you to store your  
photos using the t-zone browser.  
Delete All  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Select Camera and press the Select soft key or the  
key.  
Section 10: Camera  
123  
     
3. Select Delete All and press the Select soft key or the  
key.  
4. Scroll to the type of photo you want to clear and place a  
check mark by pressing the Select soft key or the  
key. To delete all of the items, select All.  
5. Press the Delete soft key.  
A “Sure to delete?” confirmation message appears.  
6. Press the Yes soft key to confirm the deletion.  
7. When you have finished, press the  
key.  
Settings  
This menu allows you to set the image settings.  
Photo size: allows you to set the image size to either 640x480,  
320x240, 160x120, or 128x120. The icon for the selected  
image size (640x480), (320x240), (160x120), (128x120)  
displays on the capture screen.  
Shutter Sound: allows you to select a tone for the shutter  
sound.  
Flash light: allows you to set the Flash light to manual or  
automatic.  
Default name: allows you to change the default name assigned  
to your photo.  
Memory Status  
This option allows you to view the following memory  
amounts in your phone:  
Memory available to store photos  
Memory currently used to store your photos  
124  
   
Section 11: Funbox  
Topics Covered  
• t-zones  
• Sounds  
• Images  
• Games  
• My Photos  
• Delete All  
• Memory Status  
• Melody Composer  
The Funbox menu contains menus to download games,  
sounds, and images.  
Section 11: Funbox  
125  
   
t-zones  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access and  
navigate the Wireless Web using your phone.  
Sounds  
Inthismenu,youcanviewthelistofsoundsdownloaded  
fromthe web serveror received in multimediamessages.  
You can set a downloaded sound as the current ring tone.  
Scroll through the melody list and press the Options soft  
key or the  
key. The following options are available:  
Set as ringtone: allows you to set the sound as your ring tone.  
Rename: allows you to change the name of the sound.  
Delete: allows you to delete the sound.  
Properties: displays the melody name, size, format and  
copyright information.  
Using the Get More MegaTones option on the sounds  
list, you can access the web site preset by T-Mobile and  
download new sounds.  
Using the Get More HiFi Ringers option on the sounds  
list, you can access the web site preset by T-Mobile and  
download new HiFi Ringers.  
Images  
Inthismenu,youcanviewthelistofimagesdownloaded  
from a web server or received in messages. You can set a  
downloaded image as the background image.  
Scroll to the image you want to view and press the View  
soft key or the  
key.  
126  
           
Games  
By pressing the Options soft key or the  
key, you can  
access the following options:  
Set as wallpaper: allows you to set the image as your  
wallpaper for the idle screen.  
Rename: allows you to change the name of the image.  
Delete: allows you to delete the image.  
Properties: displays the image name, size, resolution, and  
copyright information.  
UsingtheGetMorewallpapersoptionontheimageslist,  
you can access the web site preset by T-Mobile and  
download new images.  
Games  
YoucandownloadMIDlets(Javaapplicationsthatrunon  
mobile phones) from various sources using t-zones and  
store them in your phone.  
When you access the Games menu, the list of default  
games appears. Once you have downloaded games, they  
are added to the list.  
Note: Java services may not be available, depending on your service plan  
and phone model.  
Downloading a New Game  
You can download more games from the web site preset  
by T-Mobile using the Get More Games option.  
Section 11: Funbox  
127  
   
Launching a MIDlet  
Note: The procedure explained below is for the default games. For  
downloaded games, the procedure may be different.  
1. Scroll to the MIDlet you want on the Games list and press  
the Options soft key or the  
key.  
2. Highlight Launch and press the Select soft key or the  
key.  
3. On the startup screen of the MIDlet, scroll to an option  
using the Navigation keys.  
Note: The options for each game vary depending on the game.  
4. Press the  
key to confirm your selection.  
Viewing MIDlet Information  
1. In the Games Menu, scroll to the MIDlet you want and  
press the Options soft key.  
2. Highlight the Properties option and press the Select soft  
key or the  
key.  
The display shows information about the MIDlet, such as  
the file size, application version, and its vendor.  
Deleting a MIDlet  
If you want to delete a MIDlet:  
1. In the Games Menu, scroll to the MIDlet you want and  
press the Options soft key.  
128  
My Photos  
2. Select the Delete option and press the Select soft key or  
the  
key. At the confirmation prompt, press the Yes  
key to confirm the deletion.  
soft key or the  
Note: Default games can not be deleted.  
3. To exit and return to the Games list, press the Right soft  
key or the C key.  
My Photos  
In this menu you can review the photos you’ve taken.  
Press the Options soft key to choose from the following  
options:  
Send to My Album: allows you to send the photo to My Album  
on the internet.  
Default destination: allows you to remove, replace, or edit  
your default destination.  
Send: allows you to create and send a picture message. For  
Set as: allows you to set the photo as your Wallpaper or as a  
Caller ID.  
Rename: allows you to rename the photo.  
Delete: allows you to delete the photo.  
Protection: allows you to set protection on this photo so that it  
cannot be deleted.  
Properties: allows you to view the file name, file size, image  
resolution, protection status, and file format.  
Section 11: Funbox  
129  
   
Delete All  
This menu allows you to delete all of the downloaded  
items in the Sounds, Images, and My photos folders  
separately. Or, you can delete all of the items at one time.  
1. To select a folder to clear, press the Up or Down key and  
highlight an option. Press the Select soft key or the  
key.  
2. For the Sounds or Images options, you will receive a  
Delete? confirmation message. Press the Yes soft key or  
the  
key to confirm deletion. Otherwise, press the No  
soft key.  
3. For the My photos option, place a check mark next to  
the option you wish to delete by pressing the Select soft  
key or the  
key.  
4. To delete the marked items, press the Delete soft key.  
You will receive a Sure to delete? confirmation  
message. Press the Yes soft key or the  
key to  
confirm deletion. Otherwise, press the No soft key.  
Memory Status  
You can check the amount of memory being used and  
memory remaining for games, or sounds and images.  
130  
   
Melody Composer  
Melody Composer  
The melody composer allows you to create your own  
custom ringer by composing notes.  
To compose a new melody:  
1. Highlight the Compose melody option and press the  
Select soft key or the  
key.  
2. A music Staff will appear with one note enclosed in a red  
and yellow box. This is your first note, and may be  
changed by pressing the Up or Down key. Use the Up or  
Down key until you find the note that you want to create.  
The appropriate tone will sound as you press the Up or  
Down key.  
3. Press the Input soft key to input the note into your  
melody.  
Make a note sharp by using the Left or Right key to  
highlight the note and pressing the key. Make a note  
flat by pressing the key.  
4. Select the type of note or rest that you want by pressing  
the corresponding number on the keypad. The note will  
be added and a new red and yellow box will appear. You  
are now ready to enter your next note.  
5. Continue adding notes until your melody is complete.  
Atanytime, youmaypresstheOptionssoftkeytoaccess  
the following options:  
New: start a new melody.  
Open: open an existing melody.  
Section 11: Funbox  
131  
   
Play: play a melody from start to finish.  
Save: save a melody to your phone.  
Save as: save a melody with a new name.  
Instrument: select the instrument that you want to play your  
melody.  
Background melody: select a background melody to play  
along with your composed melody. Choose from Dance, Jazz,  
Latin, Pop, Reggae, or None.  
Add note: add a new note to your melody.  
Tempo: set the speed of the underlying beat of your melody.  
Volume: set the volume of your melody and background  
melody.  
To edit an existing melody:  
1. Highlight the Compose melody option and press the  
Select soft key or the  
2. Press the Options soft key and highlight the Open  
option. Press the Select soft key or the key.  
3. Highlight the melody you want to open and press the  
Select soft key or the key.  
key.  
Your melody will be displayed on the music staff.  
4. To edit a note, use the Left or Right key to move the red  
and yellow box to the note you want to edit.  
5. Use the Up or Down key to change the note.  
At anytime, you may press the Options soft key to access  
the following Edit options:  
Range: select more than one note for copying or deleting.  
Copy: copies the note or range of notes.  
132  
Melody Composer  
Cut: cuts the note or range of notes.  
Paste: pastes the note or range of notes.  
Change: allows you to change the type of note. For example,  
change a whole note to a half note.  
Delete: deletes a note or range of notes.  
Play: plays the melody.  
Note: In order to access the main Melody Composer options, such as Save  
or Open, you must press the Right Navigation key until you are at the end  
of your melody. Then press the Options soft key. Otherwise, you are in Edit  
mode and the Edit options will appear when you press the Options soft  
key. You can tell that you are in Edit mode when the word Edit appears in  
the upper left corner of your screen.  
Section 11: Funbox  
133  
134  
Section 12: t-zones  
Topics Covered  
• t-zones  
This section outlines the t-zones service on your phone.  
For more information, contact T-Mobile.  
Section 12: t-zones  
135  
   
t-zones  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access and  
navigate the Wireless Web using your phone.  
Home  
Selecting this menu connects the phone to the network  
and loads the t-zones homepage. You can also press the  
key in Idle mode to launch the t-zones browser.  
The content of the t-zones startup homepage depends on  
yourWirelessWebserviceprovider. Toscrollthrough the  
screen, use the Up and Down keys.  
Togotothestartuphomepagefromanyotherscreeninthe  
t-zones, use the Home option. For more information on  
the t-zones menus, see "Selecting and Using Menu  
Exiting the t-zones  
To exit the browser at any time, simply press the  
key  
or press and hold the  
key.  
Navigating the t-zones  
1. To scroll through browser items, press the Up or Down  
key.  
2. To select browser items, press the Select soft key.  
3. To return to the previous page, press the Back soft key or  
the C key.  
4. To return to the startup homepage, press the Home soft  
key.  
136  
       
t-zones  
Entering Text in the t-zones  
Whenyouarepromptedtoentertext,thecurrentlyactive  
textinputmodeisindicated onthescreen. Thefollowing  
modes are available:  
Upper-case character mode (A): allows you to enter upper-  
case English characters.  
Lower-case character mode (a): allows you to enter lower-  
case English characters.  
Note: You can enter symbols in upper-case or lower-case character mode  
by pressing the 1 key.  
Number mode (1): allows you to enter numbers.  
To change the text input mode, use the following  
procedures:  
1. Press the key one or more times.  
2. To enter a space, press the key.  
3. To edit text, set the cursor to the right of the character(s)  
to be corrected.  
4. Press the C key as required.  
5. Enter the correct character(s).  
Selecting and Using Menu Options  
Various menus are available when you are using t-zones  
to navigate the Wireless Web.  
To access the browser options menu:  
1. Highlight the Openwave icon at the top of the page by  
pressing the Up and Down keys.  
2. Press the Select soft key or the  
key.  
Section 12: t-zones  
137  
   
Note: The menus may vary, depending on your version of t-zones.  
The following options are available:  
Go to URL: allows you to manually enter the URL address of a  
Web page. After entering an address, press the OK soft key or  
key to go there directly.  
Favorites: shows the bookmarks list. You can bookmark the  
current web page or access previously bookmarked pages.  
Text messages: allows you to create a text message or check  
your Inbox or Outbox.  
Funbox: allows you to see the sounds and images stored on  
your phone.  
Home: takes you back at any time to the home page of the  
Wireless Web service provider.  
Back: takes you back to the previous web browser screen.  
Show URL: displays the URL address of the Web page to which  
you are currently connected. It also enables you to set the  
current site as the startup home page.  
Reload: reloads the current page.  
Favorites  
This menu stores up to 15 URL addresses.  
To store a URL address:  
1. Select an empty location and press the Select soft key or  
the  
key.  
2. Enter the address and press the OK soft key or the  
key.  
138  
t-zones  
Note: For further details about how to enter characters, see "Using ABC  
3. Enter a name for the favorite item and press the OK soft  
key or the key.  
After saving favorite items, you can access the following  
options by selecting the item, then pressing the Select  
soft key or the  
key:  
Go: takes you to the site.  
Edit: allows you to edit the address.  
Delete: allows you to delete the address.  
Go to URL  
ThismenuallowsyoutomanuallyentertheURLaddress  
of a web site that you wish to access.  
For further details about entering characters, see page 47.  
Clear Cache  
You can clear the information stored in the cache, which  
is the phone’s temporary memory which stores the most  
recently accessed Web pages.  
Press the Yes soft key to confirm the deletion. Otherwise,  
press the No soft key.  
Section 12: t-zones  
139  
140  
Section 13: Health and Safety  
Information  
Topics Covered  
• Health and Safety Information  
This section outlines the safety precautions associated  
with using your phone. These safety precautions should  
be followed to safely use your phone.  
Section 13: Health and Safety Information  
141  
   
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It  
isdesignedandmanufacturednottoexceedtheexposure  
limits for radio frequency (RF) energy set by the Federal  
Communications Commission (FCC) of the U.S.  
government.TheseFCCexposurelimitsarederivedfrom  
the recommendations of two expert organizations, the  
National Counsel on Radiation Protection and  
Measurement (NCRP) and the Institute of Electrical and  
Electronics Engineers (IEEE). In both cases, the  
recommendations were developed by scientific and  
engineering experts drawn from industry, government,  
and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile  
phones employs a unit of measurement known as the  
Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body  
expressedinunitsofwattsperkilogram(W/kg).TheFCC  
requires wireless phones to comply with a safety limit of  
1.6 watts per kilogram (1.6 W/kg). The FCC exposure  
limit incorporates a substantial margin of safety to give  
additional protection to the public and to account for any  
variations in measurements.  
142  
 
Health and Safety Information  
SAR tests are conducted using standard operating  
positions accepted by the FCC with the phone  
transmitting at its highest certified power level in all  
testedfrequencybands. AlthoughtheSARisdetermined  
atthehighestcertifiedpowerlevel,theactualSARlevelof  
the phone while operating can be well below the  
maximumvalue. Thisisbecausethephoneisdesignedto  
operate at multiple power levels so as to use only the  
power required to reach the network. In general, the  
closeryouaretoawirelessbasestationantenna,thelower  
the power output.  
Before a new model phone is available for sale to the  
public, it must be tested and certified to the FCC that it  
does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in  
positions and locations (e.g. at the ear and worn on the  
body) as required by the FCC. Body-worn operations are  
restricted to Samsung-supplied, approved, or non-  
Samsung designated accessories that have no metal and  
must provide at least 1.3 cm separation between the  
device, including its antenna (whether extended or  
retracted) and the user's body. Non-compliance with the  
above restrictions may result in violation of FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for  
thismobile phonewithallreportedSAR levels evaluated  
as in compliance with the FCC RF exposure guidelines.  
The maximum SAR values for this model phone as  
reported to the FCC are:  
Section 13: Health and Safety Information  
143  
Head: 0.659 W/Kg.  
Body-worn: 0.469 W/Kg.  
SAR information on this and other model phones can be  
viewed on-line at www.fcc.gov/oet/fccid. To find  
information that pertains to a particular model phone,  
this site uses the phone FCC ID number which is usually  
printed somewhere on the case of the phone. Sometimes  
it may benecessary toremove the battery pack to find the  
number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website  
anditshouldprovidevaluesfortypicalormaximumSAR  
for a particular phone. Additional product specific SAR  
information can also be obtained at www.fcc.gov/cgb/  
sar.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has  
published a series of Questions and Answers for  
consumers relating to radio frequency (RF) exposure  
from wireless phones. The FDA publication includes the  
following information:  
What kinds of phones are the subject of this update?  
Thetermwirelessphonerefersheretohand-heldwireless  
phones with built-in antennas, often called "cell,"  
"mobile,"or"PCS"phones.Thesetypesofwirelessphones  
canexposetheusertomeasurableradiofrequencyenergy  
(RF)becauseoftheshortdistancebetweenthephoneand  
theuser'shead.TheseRFexposuresarelimitedbyFederal  
Communications Commission safety guidelines that  
weredevelopedwiththeadviceofFDAandotherfederal  
health and safety agencies. When the phone is located at  
144  
 
Consumer Information on Wireless Phones  
greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure  
decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a  
base unit connected to the telephone wiring in a house,  
typically operate at far lower power levels, and thus  
produce RF exposures well within the FCC's compliance  
limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any  
health problems are associated with using wireless  
phones. Thereisnoproof, however, that wireless phones  
are absolutely safe. Wireless phones emit low levels of  
radio frequency energy (RF) in the microwave range  
while being used. They also emit very low levels of RF  
when in the stand-by mode. Whereas high levels of RF  
canproducehealtheffects(byheatingtissue),exposureto  
low level RF that does not produce heating effects causes  
no known adverse health effects. Many studies of low  
level RF exposures have not found any biological effects.  
Some studies have suggested that some biological effects  
mayoccur, butsuchfindingshavenot been confirmed by  
additionalresearch.Insomecases,otherresearchershave  
had difficulty in reproducing those studies, or in  
determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of  
radiation-emitting consumer products such as wireless  
phones before they can be sold, as it does with new drugs  
Section 13: Health and Safety Information  
145  
ormedicaldevices. However,theagencyhasauthorityto  
take action if wireless phones are shown to emit radio  
frequency energy (RF) at a level that is hazardous to the  
user.Insuchacase,FDAcouldrequirethemanufacturers  
ofwirelessphonestonotifyusersofthehealthhazardand  
torepair,replaceorrecallthephonessothatthehazardno  
longer exists.  
Although the existing scientific data do not justify FDA  
regulatory actions, FDA has urged the wireless phone  
industry to take a number of steps, including the  
following:  
Support needed research into possible biological effects of RF  
of the type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF  
exposure to the user that is not necessary for device function;  
and  
Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use  
on human health.  
FDA belongs to an interagency working group of the  
federal agencies that have responsibility for different  
aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this  
working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
146  
Consumer Information on Wireless Phones  
The National Institutes of Health participates in some  
interagency working group activities, as well.  
FDA shares regulatory responsibilities for wireless  
phones with the Federal Communications Commission  
(FCC). All phones that are sold in the United States must  
comply with FCC safety guidelines that limit RF  
exposure. FCC relies on FDA and other health agencies  
for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless  
phone networks rely upon. While these base stations  
operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these  
basestations are typicallythousands oftimes lower than  
thosetheycangetfromwirelessphones.Basestationsare  
thus not the primary subject of the safety questions  
discussed in this document.  
What are the results of the research done already?  
The research done thus far has produced conflicting  
results, and many studies have suffered from flaws in  
their research methods. Animal experiments  
investigating the effects of radio frequency energy (RF)  
exposures characteristic of wireless phones have yielded  
conflicting results that often cannot be repeated in other  
laboratories. A few animal studies, however, have  
suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However,  
many of the studies that showed increased tumor  
development used animals that had been genetically  
engineeredortreatedwithcancer-causingchemicalssoas  
to be pre-disposed to develop cancer in absence of RF  
exposure. Other studiesexposed theanimals toRF for up  
Section 13: Health and Safety Information  
147  
to22hoursperday.Theseconditionsarenotsimilartothe  
conditions under which people use wireless phones, so  
we don't know with certainty what the results of such  
studies mean for human health.  
Three large epidemiology studies have been published  
since December 2000. Between them, the studies  
investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma,  
meningioma, oracousticneuroma, tumorsofthebrainor  
salivary gland, leukemia, or other cancers. None of the  
studiesdemonstratedtheexistenceofanyharmfulhealth  
effects from wireless phones RF exposures. However,  
noneofthestudiescananswerquestionsaboutlong-term  
exposures, since the average period of phone use in these  
studies was around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
Acombinationoflaboratorystudiesandepidemiological  
studies of people actually using wireless phones would  
providesomeofthedatathatareneeded.Lifetimeanimal  
exposure studies could be completed in a few years.  
However, very large numbers of animals would be  
needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide  
datathatisdirectlyapplicabletohumanpopulations,but  
ten or more years' follow-up may be needed to provide  
answers about some health effects, such as cancer. This is  
because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if  
they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in  
148  
Consumer Information on Wireless Phones  
measuring actual RF exposure during day-to-day use of  
wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which  
model of phone is used.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology  
Program and with groups of investigators around the  
world to ensure that high priority animal studies are  
conducted to address important questions about the  
effects of exposure to radio frequency energy (RF).  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields  
(EMF) Project since its inception in 1996. An influential  
resultofthisworkhasbeenthedevelopmentofadetailed  
agenda of research needs that has driven the  
establishment of new research programs around the  
world. The Project has also helped develop a series of  
public information documents on EMF issues.  
FDA and Cellular Telecommunications & Internet  
Association (CTIA) have a formal Cooperative Research  
andDevelopmentAgreement(CRADA)todoresearchon  
wireless phone safety. FDA provides the scientific  
oversight, obtaining input from experts in government,  
industry, and academic organizations. CTIA-funded  
research is conducted through contracts to independent  
investigators. The initial research will include both  
laboratory studies and studies of wireless phone users.  
The CRADA will also include a broad assessment of  
additional research needs in the context of the latest  
research developments around the world.  
Section 13: Health and Safety Information  
149  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we  
do not know that there is - it is probably very small. But if  
you are concerned about avoiding even potential risks,  
you can take a few simple steps to minimize your  
exposure to radio frequency energy (RF). Since time is a  
key factor in how much exposure a person receives,  
reducingtheamountoftimespentusingawirelessphone  
will reduce RF exposure.  
If you must conduct extended conversations by wireless phone  
every day, you could place more distance between your body  
and the source of the RF, since the exposure level drops off  
dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or  
use a wireless phone connected to a remote antenna.  
Again,thescientificdatadonotdemonstratethatwireless  
phonesareharmful.ButifyouareconcernedabouttheRF  
exposure from these products, you can use measures like  
those described above to reduce your RF exposure from  
wireless phone use.  
What about children using wireless phones?  
Thescientificevidencedoesnotshowadangertousersof  
wirelessphones,includingchildrenandteenagers.Ifyou  
want to take steps to lower exposure to radio frequency  
energy (RF), the measures described above would apply  
to children and teenagers using wireless phones.  
Reducing the time of wireless phone use and increasing  
the distance between the user and the RF source will  
reduce RF exposure.  
150  
Consumer Information on Wireless Phones  
Some groups sponsored by other national governments  
have advised that children be discouraged from using  
wirelessphonesatall.Forexample,thegovernmentinthe  
United Kingdom distributed leaflets containing such a  
recommendation in December 2000. They noted that no  
evidence exists that using a wireless phone causes brain  
tumors or other ill effects. Their recommendation to limit  
wireless phone use by children was strictly  
precautionary; it was not based on scientific evidence  
that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
believe that hands-free kits reduce risks. Hands-free kits  
can be used with wireless phones for convenience and  
comfort. These systems reduce the absorption of RF  
energyintheheadbecausethephone, whichisthesource  
of the RF emissions, will not be placed against the head.  
On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part  
of the body will absorb more RF energy. Wireless phones  
marketed in the U.S. are required to meet safety  
requirementsregardlessofwhethertheyareusedagainst  
the head or against the body. Either configuration should  
result in compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
Section 13: Health and Safety Information  
151  
believethataccessories that claim toshieldtheheadfrom  
thoseemissionsreducerisks.Someproductsthatclaimto  
shield the user from RF absorption use special phone  
cases, while others involve nothing more than a metallic  
accessoryattachedtothephone.Studieshaveshownthat  
these products generally do not work as advertised.  
Unlike "hand-free" kits, these so-called "shields" may  
interfere with proper operation of the phone. The phone  
may be forced to boost its power to compensate, leading  
to an increase in RF absorption. In February 2002, the  
FederaltradeCommission(FTC)chargedtwocompanies  
that sold devices that claimed to protect wireless phone  
users from radiation with making false and  
unsubstantiated claims. According to FTC, these  
defendantslackedareasonablebasistosubstantiatetheir  
claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can  
interact with some electronic devices. For this reason,  
FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless telephones.  
This test method is now part of a standard sponsored by  
the Association for the Advancement of Medical  
instrumentation (AAMI). The final draft, a joint effort by  
FDA, medical device manufacturers, and many other  
groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers  
anddefibrillatorsaresafefromwirelessphoneEMI. FDA  
has tested wireless phones and helped develop a  
152  
Consumer Information on Wireless Phones  
voluntary standard sponsored by the Institute of  
Electrical and Electronic Engineers (IEEE). This standard  
specifiestestmethodsandperformancerequirementsfor  
hearing aids and wireless phones so that no interference  
occurs when a person uses a compatible phone and a  
compatible hearing aid at the same time. This standard  
was approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for  
possibleinteractionswithothermedicaldevices. Should  
harmfulinterferencebefoundtooccur,FDAwillconduct  
testing to assess the interference and work to resolve the  
problem.  
Additional information on the safety of RF exposures  
from various sources canbe obtained from the following  
organizations:  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration's (OSHA):  
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/  
index.html  
National institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/emfpg.html  
World health Organization (WHO):  
http://www.who.int/peh-emf/  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
National Radiation Protection Board (UK):  
http://www.nrpb.org.uk  
Section 13: Health and Safety Information  
153  
Updated 4/3/2002: US food and Drug Administration  
http://www.fda.gov/cellphones  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicatebyvoice,almostanywhere,anytime.Butan  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone behind the wheel of a  
car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such  
as speed dial and redial. If available, these features help  
you to place your call without taking your attention off  
the road.  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
3. Position your wireless phone within easy reach. Be able  
to access your wireless phone without removing your  
eyes from the road. If you get an incoming call at an  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow, ice and  
even heavy traffic can be hazardous.  
154  
 
Road Safety  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a "to do" list or flipping through  
your address book takes attention away from your  
primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place  
calls when you are not moving or before pulling into  
traffic. Try to plan calls when your car will be stationary.  
If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then  
continue.  
7. Do not engage in stressful or emotional conversations  
that may be distracting. Make people you are talking  
with aware you are driving and suspend conversations  
that have the potential to divert your attention from the  
road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or  
other local emergency number in the case of fire, traffic  
accident or medical emergencies. Remember, it is a free  
call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1  
or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see  
a broken-down vehicle posing no serious hazard, a  
broken traffic signal, a minor traffic accident where no  
Section 13: Health and Safety Information  
155  
one appears injured, or a vehicle you know to be stolen,  
call roadside assistance or other special non-emergency  
number.  
"The wireless industry reminds you to use your phone safely  
when driving."  
Formoreinformation,pleasecall1-888-901-SAFE,orvisit  
our web-site www.wow-com.com  
Provided by theCellularTelecommunications& Internet  
Association  
Operating Environment  
Remember to follow any special regulations in force in  
any area  
and always switch your phone off whenever it is  
forbidden to use it, or when it may cause interference or  
danger. When connecting the phone or any accessory to  
another device, read its user's guide for detailed safety  
instructions. Do not connect incompatible products.  
Aswithothermobileradiotransmittingequipment,users  
are advised that for the satisfactory operation of the  
equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over  
your shoulder).  
Using Your Phone Near Other Electronic Devices  
Mostmodernelectronicequipmentisshieldedfromradio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
156  
   
Using Your Phone Near Other Electronic Devices  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker.  
These recommendations are consistent with the  
independentresearchandrecommendationsofWireless  
Technology Research.  
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches)  
from their pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
should use the ear opposite the pacemaker to minimize  
potential interference.  
If you have any reason to suspect that interference is  
taking place, switch your phone off immediately.  
Section 13: Health and Safety Information  
157  
Hearing Aids  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aidmanufacturer todiscuss  
alternatives.  
Other Medical Devices  
Ifyouuseanyotherpersonalmedicaldevices,consultthe  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information.Switchyourphoneoffinhealthcarefacilities  
whenanyregulationspostedintheseareasinstructyouto  
do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also  
consultthemanufacturerofanyequipmentthathasbeen  
added to your vehicle.  
Posted Facilities  
Switchyourphoneoffinanyfacilitywherepostednotices  
require you to do so.  
Potentially Explosive Environments  
Switchyourphoneoffwheninanyareawithapotentially  
explosiveatmosphereandobeyallsignsandinstructions.  
158  
 
Emergency Calls  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots  
(fuel storage and distribution areas), chemical plants or  
where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often  
butnot always clearly marked. They includebelow deck  
on boats, chemical transfer or storage facilities, vehicles  
using liquefied petroleum gas (such as propane or  
butane), areas where the air contains chemicals or  
particles, such as grain, dust or metal powders, and any  
other areawhereyouwould normallybe advised toturn  
off your vehicle engine.  
Emergency Calls  
Thisphone,likeanywirelessphone, operatesusingradio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee  
connectioninallconditions. Therefore, youshouldnever  
rely solely on any wireless phone for essential  
communications (medical emergencies, for example).  
Remember,tomakeorreceiveanycallsthephonemustbe  
switched on and in a service area with adequate signal  
strength. Emergency calls may not be possible on all  
wireless phone networks or when certain network  
services and/or phone features are in use. Check with  
local service providers.  
Section 13: Health and Safety Information  
159  
 
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location  
(for example, 911 or other official emergency number).  
Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example),  
you may  
firstneedtodeactivatethosefeaturesbeforeyoucanmake  
an emergency call. Consult this document and your local  
cellular service provider.  
Whenmakinganemergencycall,remembertogiveallthe  
necessary information as accurately as possible.  
Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off  
the call until given permission to do so.  
Restricting Children's access to your Phone  
Yourphoneisnotatoy.Childrenshouldnotbeallowedto  
play  
with it because they could hurt themselves and others,  
damagethephoneormakecallsthatincreaseyourphone  
bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in  
close proximity to receiving equipment. The FCC can  
160  
 
Other Important Safety Information  
require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane  
orbutane)mustcomplywiththeNationalFireProtection  
Standard (NFPA-58). For a copy of this standard, contact  
the National Fire Protection Association, One  
Batterymarch Park, Quincy, MA 02269, Attn: Publication  
Sales Division.  
Cautions  
Any changes or modifications to your phone not  
expressly approved in this document could void your  
warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries,  
antennas and chargers. The use of any unauthorized  
accessories may be dangerous and void the phone  
warranty if said accessories cause damage or a defect to  
the phone.  
Althoughyourphoneisquitesturdy, itisacomplexpiece  
ofequipmentandcanbebroken.Avoiddropping,hitting,  
bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the  
phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the  
device.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
Section 13: Health and Safety Information  
161  
 
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both  
installed or portable wireless equipment in the area over the air  
bag or in the air bag deployment area. If wireless equipment is  
improperly installed and the air bag inflates, serious injury  
could result.  
Switch your phone off before boarding an aircraft. The use of  
wireless phone in aircraft is illegal and may be dangerous to  
the aircraft's operation.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the offender, or  
legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on  
the signal strength in your area. Your phone informs you  
of the current signal strength by displaying a number of  
bars next to the signal strength icon. The more bars  
displayed, the stronger the signal.  
Ifyou'reinsideabuilding, beingnearawindowmaygive  
you better reception.  
Understanding the Power Save Feature  
If your phone is unableto finda signal after 15 minutes of  
searching, a Power Save feature is automatically  
activated. If your phone is active, it periodically rechecks  
service availability or you can check it yourself by  
pressing any key.  
Anytime the Power Save feature is activated, a message  
displays on the screen. When a signal is found, your  
phone returns to standby mode.  
162  
 
Availability of Various Features/Ring Tones  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver.  
When it's turned on, it receives and transmits radio  
frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This  
power can range from 0.006 watts to 0.2 watts in digital  
mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized  
personnel should service your phone and accessories.  
Faulty service may void the warranty.  
There are several simple guidelines to operating your  
phone properly and maintaining safe, satisfactory  
service.  
Hold the phone with the antenna raised, fully-extended and over  
your shoulder.  
Try not to hold, bend or twist the phone's antenna.  
Don't use the phone if the antenna is damaged.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the power  
off and remove the battery. If it is inoperable, call Customer  
Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and  
may require additional subscription and/or usage  
charges. Not all features are available for purchase or use  
Section 13: Health and Safety Information  
163  
 
inallareas.DownloadableRingTonesmaybeavailableat  
an additional cost. Other conditions andrestrictions may  
apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone  
usage patterns and conditions. Battery power  
consumption depends on factors such as network  
configuration, signal strength, operating temperature,  
features selected, frequency of calls, and voice, data, and  
other application usage patterns.  
Battery Precautions  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses  
less power; talk and standby time are greatly affected by the  
signal strength on the cellular network and the parameters set  
by the network operator.  
Battery charging time depends on the remaining battery charge  
and the type of battery and charger used. The battery can be  
charged and discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and standby time)  
is noticeably shorter than normal, it is time to buy a new  
battery.  
If left unused, a fully charged battery will discharge itself over  
time.  
Use only Samsung-approved batteries and recharge your  
battery only with Samsung-approved chargers. When a charger  
is not in use, disconnect it from the power source. Do not leave  
the battery connected to a charger for more than a week, since  
overcharging may shorten its life.  
164  
   
Battery Precautions  
Extreme temperatures will affect the charging capacity of your  
battery: it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity  
and lifetime of the battery. Always try to keep the battery at  
room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged.  
Li-ion batteries are particularly affected by temperatures below  
0 °C (32 °F).  
Do not short-circuit the battery. Accidental short-circuiting can  
occur when a metallic object (coin, clip or pen) causes a direct  
connection between the + and - terminals of the battery (metal  
strips on the battery), for example when you carry a spare  
battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Dispose of used batteries in accordance with local regulations.  
In some areas, the disposal of batteries in household or  
business trash may be prohibited. For safe disposal options for  
Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a  
fire.  
Section 13: Health and Safety Information  
165  
Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years  
Keep the phone and all its parts and accessories out of the  
reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an  
electric shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its  
moving parts may be damaged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms  
up to its normal operating temperature, moisture can form  
inside the phone, which may damage the phone's electronic  
circuit boards.  
Do not drop, knock or shake the phone. Rough handling can  
break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving  
parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as a  
microwave oven, a stove or a radiator. The phone may explode  
when overheated.  
166  
 
Care and Maintenance  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas or modified accessories may damage  
the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for  
service.  
Section 13: Health and Safety Information  
167  
168  
Section 14: Warranty Information  
Topics Covered  
• Standard Limited Warranty  
Section 14: Warranty Information  
169  
   
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, L.P.  
("SAMSUNG") warrants to the original purchaser  
("Purchaser") that SAMSUNG's Phones and accessories  
("Products") are free from defects in material and  
workmanship under normal use and service for the  
period commencing upon the date of purchase and  
continuingforthefollowingspecifiedperiodoftimeafter  
that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
WhatisNotCovered?ThisLimitedWarrantyisconditioned  
upon proper use of Product by Purchaser. This Limited  
Warranty does not cover: (a) defects or damage resulting  
from accident, misuse, abuse, neglect, unusual physical,  
electrical or electromechanical stress, or modification of  
any part of Product, including antenna, or cosmetic  
damage; (b) equipment that has the serial number  
removedormadeillegible;(c)anyplasticsurfacesorother  
externally exposed parts that are scratched or  
damaged due to normal use; (d) malfunctions resulting  
from the use of Product in conjunction with accessories,  
170  
   
Standard Limited Warranty  
products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased  
outside the United States or Canada. This Limited  
Warranty covers batteries only if battery capacity falls  
below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the  
battery has been charged by a battery charger not  
specified or approved by SAMSUNG for charging the  
battery, (ii) any of the seals on the battery are broken or  
show evidence of tampering, or (iii) the battery has been  
used in equipment other than the SAMSUNG phone for  
which it is specified.  
What are SAMSUNG's Obligations? During the applicable  
warranty period, SAMSUNG will repair or replace, at  
SAMSUNG's sole option, without charge to Purchaser,  
any defective component part of Product. To obtain  
service under this Limited Warranty, Purchaser must  
return Product to an authorized phone service facility in  
an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof  
ofsaleshowingthedateofpurchase,theserialnumberof  
Product and the sellers' name and address. To obtain  
assistance on where to deliver the Product, call Samsung  
Customer Care at 1-888-987-4357. Upon receipt,  
SAMSUNG will promptly repair or replace the defective  
Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components  
when repairing any Product or replace Product with a  
rebuilt, reconditioned or new Product. Repaired/  
Section 14: Warranty Information  
171  
replaced leather cases, pouches and holsters will be  
warranted for a period of ninety (90) days. All other  
repaired/replacedProductwillbewarrantedforaperiod  
equal to the remainder of the original Limited Warranty  
ontheoriginalProductorfor90days,whicheverislonger.  
All replaced parts, components, boards and equipment  
shall become the property of SAMSUNG. If SAMSUNG  
determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts,  
shipping,andlaborchargesfortherepairorreturnofsuch  
Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY  
CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO  
WARRANTY OR REPRESENTATION AND THERE  
ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
172  
Standard Limited Warranty  
NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN  
EXPRESS WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE  
BY OPERATION OF LAW, INCLUDING IF  
APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO  
THE SAME DURATION OF TIME AS THE EXPRESS  
WRITTEN WARRANTY STATED HEREIN. SOME  
STATES/PROVINCESDONOTALLOWLIMITATIONS  
ONHOWLONGANIMPLIEDWARRANTYLASTS,SO  
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
IN ADDITION, SAMSUNG SHALL NOT BE LIABLE  
FOR ANY DAMAGES OF ANY KIND  
RESULTING FROM THE PURCHASE, USE, OR  
MISUSE OF, OR INABILITY TO USE THE PRODUCT  
OR ARISING DIRECTLY OR INDIRECTLY FROM THE  
USE OR LOSS OF USE OF THE PRODUCT OR FROM  
THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIALORSIMILARDAMAGES,ORLOSS  
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR  
DAMAGESARISINGFROMANYTORT(INCLUDING  
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT  
COMMITTED BY SAMSUNG, ITS AGENTS OR  
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT  
OR FOR ANY CLAIM BROUGHT AGAINST  
PURCHASER BY ANY OTHER PARTY. SOME STATES/  
PROVINCES DO NOT ALLOW THE EXCLUSION OR  
LIMITATIONOFINCIDENTALORCONSEQUENTIAL  
Section 14: Warranty Information  
173  
DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,  
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH  
VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT  
EXTENDTOANYONEOTHERTHANTHEORIGINAL  
PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY  
PORTION OF THIS LIMITED WARRANTY IS HELD  
ILLEGALORUNENFORCEABLEBYREASONOFANY  
LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS  
LIMITED WARRANTY WHICH PURCHASER  
ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS  
LIMITED AS THE LAW PERMITS. THE PARTIES  
UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN  
CONJUNCTION WITH THE PRODUCT. SAMSUNG  
MAKES NO WARRANTIES OR REPRESENTATIONS  
AND THERE ARE NO CONDITIONS, EXPRESS OR  
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT,  
WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE,  
INCLUDING THE ABILITY TO INTEGRATE ANY  
SUCH SOFTWARE OR EQUIPMENT WITH THE  
174  
Standard Limited Warranty  
PRODUCT. THE QUALITY, CAPABILITIES,  
OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER  
OFSUCHTHIRD-PARTYSOFTWAREOREQUIPMENT,  
AS THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure  
between Purchaser and SAMSUNG, and SAMSUNG's  
Product pricing reflects this allocation of risk and the  
limitationsofliabilitycontainedinthisLimitedWarranty.  
The agents, employees, distributors, and dealers of  
SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties  
binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by  
SAMSUNG and should not be relied upon.  
Samsung Telecommunications America, L.P.  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2005SamsungTelecommunicationsAmerica.Allrights  
reserved.  
No reproduction in whole or in part allowed without  
prior  
written approval. Specifications and availability subject  
to change without notice.  
Section 14: Warranty Information  
175  
Intellectual Property Statement  
All Intellectual Property, as defined below, owned by or  
which is otherwise the property of Samsung or its  
respective suppliers relating to the SAMSUNG Phone,  
including but not limited to, accessories, parts, or  
software relating thereto (the "Phone System"), is  
proprietary to Samsung and protected under federal  
laws, state laws, and international treaty provisions.  
Intellectual Property includes, but is not limited to,  
inventions (patentable or unpatentable), patents, trade  
secrets, copyrights, software, computer programs, and  
related documentation and other works of authorship.  
You may not infringe or otherwise violate the rights  
securedbytheIntellectualProperty. Moreover,youagree  
thatyouwillnot(andwillnotattemptto)modify,prepare  
derivative works of, reverse engineer, decompile,  
disassemble, or otherwise attempt to create source code  
from the software. No title to or ownership in the  
Intellectual Property is transferred to you. All applicable  
rights of the Intellectual Property shall remain with  
SAMSUNG and its suppliers.  
176  
 
Samsung Telecommunications America (STA), Inc.  
Samsung Telecommunications America (STA),  
Inc.  
Internet Address: http://www.samsungusa.com  
©2005SamsungTelecommunicationsAmerica.Samsung  
is a registered trademark of Samsung Electronics  
America, Inc. and its related entities.  
Headquarters:  
Customer Care Center:  
1301 E. Lookout Drive  
Richardson, TX 75082  
Tel: 972.761.7000  
1601 E. Plano Parkway, Suite 150  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Openwave® is a registered Trademark of Openwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Section 14: Warranty Information  
177  
 
178  
Call Waiting 35, 102  
Camera 117  
Index  
Charging battery 8  
Conversion 114  
D
Dialing a Number  
Phonebook 60  
A
ABC mode 48  
Accessing a Menu Function  
Alerts on Call 92  
SIM Card 62  
B
Display  
backlight 18  
icons 17  
Backlight  
description 18  
Band Selection 104  
Battery  
Display Settings 89  
E
Entering Text 47  
Changing the Text Entry  
Mode 48  
charging 8  
installing 7  
low indicator 10  
removing 6  
Using ABC Mode 51  
Using Numbers 53  
Using Symbols 53  
Using T9 Mode 49  
Broadcast Messages 82  
Browser Messages 81  
C
Call Functions 21  
Adjusting the Call Volume 24  
Answering a Call 25  
Call Log 26  
F
Funbox 125  
Functions and Options 30  
G
Correcting the Number 22  
Making a Call 22  
Redialing Last Number 23  
Silent Mode 30  
Games 127  
Get More Help 93  
Getting Started 5  
Activating Your Phone 6  
Voicemail 11  
Call Records  
Call time 29  
Delete all 29  
Greeting Message 93  
H
Health and Safety Informa-  
Incoming calls 28  
Missed calls 28  
Outgoing calls 28  
179  
 
tion 141  
HiFi Ringers 126  
N
Network Selection 103  
Network Services  
Call Forwarding 100  
Number mode 48  
O
On/off switch, phone 10  
I
Icons, description 17  
Instant Messaging 84  
International Call 22  
K
Options  
Keypad Tone 92  
During a Call 32  
Putting a Call on Hold 32  
L
Low battery indicator 10  
Own Number 63  
P
Personal Assistant  
Alarm 106  
M
Making a Call  
Phonebook 24  
MegaTones 126  
Melody Composer 131  
Calculator 110  
Calendar 107  
To Do List 111  
Memo  
Viewing 110  
Writing 108  
Phone  
icons 17  
switching on/off 10  
Menu Navigation 39  
Menu Outline 41  
Message Tone 92  
Phonebook 55  
Entry Options 59  
Searching for a Number 34  
Messaging 67  
Picture Messages 74  
Types of Messages 68  
R
Missed Call  
Deleting 27  
Editing 26  
Record  
Voice Memo 112  
Reset Settings 100  
Ring Volume 91  
Viewing 26  
Multi-Party Call 36  
Dropping One Participant 37  
Private Conversation 36  
Mute 33  
My Photos 129  
S
Security 94  
Service Dialing Numbers 64  
180  
Settings 87  
book 55  
Sound Settings 91  
Finding a Phonebook Entry  
Shortcuts 41  
SIM card  
Finding My Phone Number  
installing 6  
V
Soft Keys 31  
Speakerphone 34  
Speed Dial  
Setting Up Entries 60  
Speed Dialing 60  
Standard Limited Warranty  
Voice List 113  
Voice Mail 11, 82  
changing number 12  
Voice Memo 112  
Voice Messages 68  
W
Storing a number  
Phone’s Memory 57  
Phonebook 57  
Warranty Information 169  
SIM Card 56  
Switching on/off  
phone 10  
T
T9 mode 48  
Text Input Mode  
Changing 48  
Text Messages 70  
Travel adapter 8  
t-zones 126, 135, 136  
Entering Text 137  
Exiting 136  
Navigating 136  
U
Understanding Your Phone 13  
Features of Your Phone 14  
View of Your Phone 14  
Understanding Your Phone-  
181  
182  

Seagate EE25 SERIES ST920814AM User Manual
SanDisk 80 11 01546 User Manual
Samsung Spinpiont M8 HN M500MBB User Manual
Samsung SCH i600 User Manual
Roland CD 2i User Manual
Pioneer CD Player DEH P7100BT User Manual
Philips CDR880BK User Manual
Philips AZ3856 User Manual
Pantech GF200 User Manual
Nokia CELLPHONE User Manual