DUAL BAND GPRS Series
SGH-e315
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
Code No.: GH68-05533A
English 08/2004 Rev. 1.0
VDH1.E3(3.1)_MG_E315_081204_F4
Samsung Telecommunications America,
L.P.
U.S. Headquarters:
1301 East Lookout Drive
Richardson, Texas 75082
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/
wireless
©2004 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed without
prior written approval. Samsung is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Table of contents
Table of contents
1
Table of contents
2
Table of contents
3
Table of contents
4
Appendix B: Guide to Safe and Responsible
Wireless Phone Use ..................................... 171
Appendix C: Consumer Update on Wireless
Phones..................................................... 177
Table of contents
5
Table of contents
6
Unpacking
Your package contains the following items:
Travel Adapter
Handset
Battery
Ear-microphone
User’s Manual
Your local Samsung dealer can provide you with
additional accessories including:
● Standard battery
● Ear-microphone
● Simple hands free car kit ● Car holder
● Cigarette lighter adapter
● Travel adapter/charger
● Data kit
● Battery charger
● Holster
Unpacking
7
Unpacking
8
Your phone
Phone layout
The illustrations below show the main features of your
phone:
Earpiece
Display
Navigation (Up/Down/
Left/Right) keys
WAP Browser key
Volume/menu
browse keys
Soft key (right)
Power on/off/
menu exit key
Soft key (left)
Dial/menu
confirmation key
Alphanumeric keys
Microphone
Cancel/
correction key
Special
function keys
Your phone
9
Antenna
Headset jack
Camera
Camera key
External display
Service light
Key(s)
Description
Use the Up and Down portions of the navigation key to
scroll through menus and your Phone book.
In Idle mode, pressing Up allows you to quickly access
the Camera menu, while pressing Down allows you to
access your favorite menus directly. For more
Use the left and right portions of the navigation key to
select menus. In Menu mode, the Left key returns you
to the previous menu level and the Right key selects
the current menu.
You can also move your cursor to the left and right
when entering text, and Idle mode, you can access
your favorite menus directly. For more information
The left and right soft keys allow you to select the
menu text on the bottom line of your display.
Your phone
10
Key(s)
Description
In Idle mode, use the Browser key to launch the WAP
(Wireless Application Protocol) browser, and in menu
mode, use this key to select a highlighted option.
Use the Dial key to make or answer calls.
In Idle mode, hold down to review the most recent
number dialed or received.
In Menu mode, use to select a menu function or stores
information that you have entered, such as the name
in a Phone book entry.
Use the Cancel key deletes characters in the display.
In Menu mode, use it to return to the previous menu
level.
Use the Menu exit key to end a call or turns your
phone on and off.
In Menu mode, use it to return to Idle mode.
In Idle mode, press and hold this key to access your
voice mail.
Use the keypad to enter numbers, letters, and some
special characters.
Your phone
11
Key(s)
Description
Enters special characters.
Performs various functions.
Press and hold the Camera key, on the right side of
your phone, to turn your camera on. With your camera
on, use this key as your shutter button.
Use the Volume key, on the left side of your phone, to
adjust the earpiece volume during a call, or use it to
adjust the keypad tone volume with the phone open
and in Idle mode.
With the phone closed, press and hold to turn on the
external display.
In Menu mode, use for scrolling through menus.
Your phone
12
Display
Display layout
The display has three areas:
Icons
Text and graphics area
Soft key function indicators
Area
Description
Top line
Displays various icons. See page 14.
Text and
graphics area
Displays messages, instructions, and any
information you enter, such as a phone number
you’re dialing.
Bottom line
Shows the functions currently assigned to the
soft keys.
Your phone
13
Icons
Icon
Description
Indicates the incoming signal strength. The more bars
displayed, the stronger the signal.
Displays when you are on a call.
Displays if you leave your service area. When displayed,
you cannot make or receive a call.
Displays when the Call Forwarding feature is activated.
Indicates that an alarm is set to ring at a specified time.
Displays when a you receive a new text message.
Displays when you receive a new multimedia message.
Displays when you receive a new voice mail message.
Indicates that you have activated the Mute mode.
Indicates that either Silent mode is active or that you
have set your phone to vibrate when you receive a call.
For more details on this feature, see Sound Settings on
Your phone
14
Icon
Description
Indicates the charge level of your battery. The more bars
you see, the more power remaining.
Back light
When you open your phone or press any key, a back light
illuminates the display and the keypad. You can set the
amount of time that the back light remains on by changing
the setting in the Back Light menu (Menu 9.3.4). The
display turns off after one minute to conserve battery
External display
Your phone has an external display on the front of the
phone. It indicates when you have an incoming call or
message. It also alerts you at a specified time when you
have set an alarm. The back light turns on and the
corresponding icon appears on the external display.
When you close your phone, the display shows the current
time on a digital clock. You can select the display color
using the Exterior display menu (Menu 9.3.2). For details,
With the phone closed, the external display can be used
while taking pictures. If you press and hold the Camera
key, the external display becomes the view finder for your
Your phone
15
Service light
The service light is on the front of the phone, and it flashes
to indicate that services are available for your phone.
To activate or deactivate the service light, use the Service
Service light
Camera
The camera feature on your phone allows you to take a
photo or record a video while on the move. For further
Your phone
16
Getting started
Installing the SIM card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and much more.
Important! The plug-in SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of the reach of small children.
To install your SIM card, follow these steps:
1. If necessary, switch your phone off by holding down the
key until the power-off image displays.
2. Remove the battery. To remove your battery, follow
these steps:
●
Slide the battery lock towards the top of the phone and
hold it in that position.
●
Lift away the battery, as shown.
●
●
Getting started
17
3. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of
the card face into the phone.
Note: When you need to remove your SIM card, slide it out of the socket, as
shown.
4. Replace the battery so the tabs on the end align with
the slots at the bottom of the phone.
Getting started
18
5. Press the battery until it clicks into place. Make sure
that the battery is properly installed before turning your
phone on.
Charging a battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for details.
You can use your phone while the battery is charges, but it
takes longer for the battery to charge completely.
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery fully recharges in about three and half hours
(200 minutes).
1. With the battery installed, plug the connector of the
travel adapter into the jack at the bottom of the phone.
Getting started
19
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from your phone by
pressing the buttons on both sides of the connector
and pulling the connector out.
●
●
●
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low battery indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning Low
Battery” message repeats at regular intervals on the
display. When this occurs, your phone turns off the
backlight to conserve the remaining battery power. When
the battery level gets too low, the phone automatically
turns off.
Note: Standby and talk times will vary depending on phone usage patterns
and conditions. Battery power consumption depends on factors such
as network configuration, signal strength, operating temperature,
features selected, vibrate mode, backlight settings, browser use,
frequency of calls, and voice, data, and other application usage
patterns.
Getting started
20
Switching your phone on/off
1. Open the phone.
2. Press and hold the
on.
key until the phone switches
3. If the phone asks you to enter the phone password,
enter the password and press the OK soft key or the
key. The password is preset to “00000000” at the
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the
key. For further details, see
The phone searches for your network and after finding it,
the idle screen, illustrated below, appears in the display.
Now, you can make or receive calls.
Service Provider
05:17 AM
Tue Mar 30
Menu
Ph.Book
Note: The display language is preset to English at the factory. To change the
language, use the Language menu (Menu 9.2.1). For further details,
5. To turn your phone off, press and hold the
until the power-off image displays.
key
Getting started
21
Getting started
22
Call functions
Making a call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu
(Menu 9.2.5), the phone will automatically redial up to ten times when
the person does not answer the call or is already on the phone. See
page 134 for more details.
Making an international call
1. Press and hold the
key. The + character displays.
2. Enter the country code, area code, and phone number
and press the key.
Correcting the number
To clear
Press the
the last digit
displayed
key
any other digit in
the number
Left or Right key until the cursor is to
the right of the digit you want to delete,
then press the
key. You can also
insert a missing digit this way.
the whole display
press and hold the
key and hold
it for more than one second.
Call functions
23
Ending a call
When you want to end your call, briefly press the
Redialing the last number
key.
The phone stores the numbers for calls you’ve dialed,
received, and missed. For more details, see “Call records”
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the
key to display your recent numbers,
listed in the order in which you dialed or received them.
3. Use the Up and Down keys to highlight the number you
want, and then choose one of the options below.
To
Press the
dial the number
edit the number
key.
Options soft key and select Edit.
Then change the number, referring to
delete the number
Options soft key and select Delete.
delete all of the
numbers
Options soft key and select Delete
Call functions
24
Making a call from Phone book
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called your Phone book.
Once you have stored a number in your Phone book, you
can dial it by pressing just a few keys. You can also assign
your most frequently-used numbers to number keys using
the Speed Dial feature.
For more details about your Phone book, see page 33.
Adjusting the volume
To adjust the earpiece volume during a call, use the
Volume keys on the left side of your phone. Press the
key to increase the volume, or press the
decrease the volume.
key to
Note: In Idle mode, use the
and
keys to adjust the keypad tone
volume.
Call functions
25
Answering a call
When you receive a call, your phone rings and displays
the incoming call image. If you have stored information
about the caller in your Phone book, then this information
displays when they call.
Note: You can answer a call while using the Phone book or menu features.
1. To answer a call, open your phone and press the
key or press the Accept soft key.
•
If Anykey Answer in the Extra Settings menu (Menu
9.2.5) is activated, you can press any key except the
key or Reject soft key to answer a call. See
•
If Active Folder in the Extra Settings menu (Menu
9.2.5) is activated, your call is answered automatically
when you open your phone.
Note: To reject an incoming call, press and hold the Volume keys if your phone
is closed, or press either the
key or the Reject key if your phone is
open.
2. To end a call, either close your phone or press the
key.
Viewing missed calls
When you do not answer an incoming call, your phone
displays a missed call message on the idle screen, which
indicates how many calls you missed.
Call functions
26
To review missed calls:
1. Open your phone, if closed.
2. Press the View soft key. The number corresponding to
the most recent missed call displays. To view other
numbers, return a call, or edit the numbers, follow
these steps:
To
Press the
scroll through the missed
calls
Up or Down key.
call the number displayed
key.
edit or delete a missed call
number
Select soft key or the
key and follow the steps
listed in Editing a missed
call number below.
Editing a missed call number
Note: When the number corresponding to the missed call is not available, the
Edit Number option does not display.
1. With the Missed Calls menu displayed (Menu 2.1), use
the Up and Down keys to highlight the number you
want to edit.
2. Press the Select soft key or the
key.
key.
3. Press the Options soft key or the
Call functions
27
4. Highlight Edit, and press the Select soft key or the
key.
5. Enter the number you want.
To
Press the
call the number
store the number
key
Save soft key and enter a name and
location. For further details, see
Deleting a missed call
1. With the Missed Calls menu displayed (Menu 2.1), use
the Up and Down keys to highlight the number you
want to delete.
2. Press the Select soft key or the
key.
key.
3. Press the Options soft key or the
4. Highlight Delete, and press the Select soft key or the
key.
You can press the
key at any time to exit the Missed
Calls menu.
Note: You can access the Missed Calls feature by selecting the Missed Calls
Call functions
28
Quickly switching to Silent mode
Silent mode is convenient when you want to turn your
phone’s ring tone off, in a theater for example.
In Idle mode, press and hold the
key until the Silent
mode message and the Vibration icon ( ) display.
In Silent mode, instead of sounds, your phone will vibrate,
flash its light, or do nothing, depending on the function and
the situation.
To exit and reactivate the previous sound settings, press
and hold the
key again until Exit silent mode displays.
The Vibration icon ( ) no longer displays.
Notes:
• When you turn off the phone, Silent mode is not deactivated.
• Activating Silent mode does not turn off the camera’s shutter
sound.
Call functions
29
Call functions
30
Selecting functions and options
Your can customize most of your phone’s functions.
These functions are arranged in menus and sub-menus
and are accessed using the two soft keys
and
on
your keypad. Each menu and sub-menu allows you to
view and change the settings for a particular function.
Using the soft keys
The roles of the soft keys vary depending on the function
you are currently using, and the labels on the bottom line
of your display just above each key indicate their current
role.
Service
Provider
Tue Mar 30
05:17 AM
Press the right soft key
to access the Phone
book menu.
Press the left soft key
for Menu mode.
Selecting functions and options
31
Selecting options
To view the various functions and change the options
available to you, follow these steps.
1. Select the menu you want.
2. Press the appropriate soft key.
To
Press the
select the:
• function displayed
• option highlighted
Select soft key or the
key.
view the next function or
highlight the next option on a
list
Down key or
the left side of the phone.
key on
move back to the previous
function or option on a list
Up key or
left side of the phone.
key on the
move back up one level in the
menu structure
Left key,
key.
soft key or C
exit the menu structure without
changing the settings
key.
In some functions, you may need to enter a password or
PIN. Enter the code and press the OK soft key.
Note: When you access a list of options, your phone highlights the currently
active option. If there are only two options, such as On/Off or Enable/
Disable, your phone highlights the option that is not currently active, so
that you can select it directly.
Selecting functions and options
32
Phone book
You can store phone numbers with a callers name in your
SIM card or in your phone’s memory. These memory
location are physically separate but are used as a single
entity, called your Phone book.
Note: The maximum number of phone numbers that you can store varies
depending on your particular SIM card.
Storing a number with a name
There are two ways to store a number:
● Using the Save soft key in Idle mode
● Using the New Entry option in the Phone book menu.
Storing a number in Idle mode
When you enter a number, Save displays above the left
soft key so you can store the number in your Phone book.
1. Enter the number you want to store.
Note: If you make a mistake entering a number, correct it using the
key.
2. To save the number, press the Save soft key.
3. Select a category for the number. There are three
categories available:
•
•
•
Mobile number
Work number
Home number
To select the category, press the Up or Down key and
press the Select soft key or the key
.
Phone book
33
4. Select a memory location, either SIM or Phone, using
the Up or Down key and then pressing the Select soft
key or the
key.
Note: When you change phones, any numbers stored in your SIM card memory
are automatically available with the new phone, whereas any numbers
stored in the phone’s memory will need to be reentered.
5. Enter a name, and press the OK soft key or the
key
to store the name and number.
After saving the entry, your phone displays the Phone
book entry or name you added.
To
Press the
use the entry options
Options soft key or the
key. For further details, see
return to the idle screen
key.
Storing a number using the Phone book menu
1. At the idle screen, press the Ph.Book soft key.
2. Use the Up or Down key to highlight New Entry and
press the Select soft key or the
key.
3. Highlight the category of the number to be stored, and
press the Select soft key or the key
.
Note: The E-mail address is available in this step. It allows you to save an E-mail
address instead of a phone number.
Phone book
34
4. Select a memory location, either SIM or Phone, using
the Up or Down key and then pressing the Select soft
key or the
key.
Note: When you are saving an e-mail address, SIM Memory is not available.
5. Enter a name and press the OK soft key or the
6. Enter a number or address you want to store and press
key.
the Save soft key or the
key.
After saving the entry, your phone displays the Phone
book entry or name you added.
To
Press the
use the entry options
Options soft key the
For further details, see
key.
return to the idle screen
key.
Using Phone book entry options
While accessing any Phone book entry, press the Options
soft key or the key to use the options for the entry. The
following options are available:
1. Photo Caller ID: allows you to assign one of your
photos as a caller ID image, which is displayed when
you receive a call from the selected number. For details
Phone book
35
Select a photo: allows you to select a photo for the
number.
Take a photo: allows you to take a new photo to be used
as a caller ID.
View: displays the photo assigned to the number.
Delete caller ID: cancels the photo caller ID setting for the
number.
2. Edit: allows you to edit the name and number.
Select One entry to change the name and/or one number
for the selected entry. If you change the name, the
number is saved separately with the new name.
Select All entry to change only the name of the entry.
3. Copy: allows you to copy the number to another
location. You can select the memory location, either
SIM or Phone, and the location number.
4. Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to
one in Phone book, such as a different extension in the
same office.
Use the
page 23 for further details. When you are ready to dial,
press the key.
key to change the number as required; see
5. Delete: allows you to delete the name and number from
Phone book. You are asked to confirm that you wish to
delete the name and number by pressing the Yes soft
key.
Phone book
36
6. Caller Group: allows you to organize your Phone book
entry into caller groups so that the phone alerts you in a
specific way when a person from one of your groups
calls you. Select one of the ten groups available.
To remove an entry from a group, select the No Group
option. For more information about how to change caller
7. Add Entry: allows you to add a new number to the
currently selected name.
Dialling a number from Phone book
Once you have stored phone numbers in your Phone
book, you can dial them easily and quickly by using the
location numbers that you assigned to them.
Note: If you cannot remember a location number, you must go into the
Search menu in the Phone book menu to search for the entry by
name. For details, see page 40.
Dialling a number from the SIM card
1. Enter the location number for the phone number you
want to dial, press the key.
The list of entries in the SIM card displays.
Note: You can press the Up or Down key to find other numbers on the list.
2. Press the Dial soft key, the
key, or the
key
when you have selected the number you want.
Phone book
37
Dialing a number from the phone’s memory
1. In Idle mode, press and hold
. A + displays.
2. Enter the location number of the phone number you
want and press the key.
The list of entries in the phone’s memory displays.
Note: You can press the Up or Down key to find other numbers on the list.
3. Press the Dial soft key, the
key, or the
key
when you have selected the number you want.
Speed-dialing
You can assign up to eight phone numbers from your
Phone book list that you use most frequently to the
number keys (2 to 9), and then dial them easily whenever
you want by simply pressing and holding the associated
number key.
Setting up speed-dial entries
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Speed Dial by pressing the Up or Down key
and press the Select soft key or the
key.
3. Select the key to which you wish to assign the speed-
dialing number, from the 2 to 9 keys, and press the OK
soft key or the
key.
Note: Memory location 1 is reserved for your Voice Mail server number.
Phone book
38
If you have already assigned a number to the key, the
Options soft key replaces the OK soft key. Go to step 6.
4. Select an entry from the Phone book list and press the
View soft key or the
key.
5. If the entry has more than one number, highlight the
number you want using Up or Down keys and press the
Select soft key or the
key.
6. Once you have assigned a number to the selected key,
you can use the following options by pressing the
Options soft key or the
key:
•
•
•
•
Change: allows you to assign a different number to the
key.
Delete: allows you to clear the setting so that no
number is assigned to the key.
Delete all: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
Number: allows you to view the number assigned to
the key.
7. When you are finished, press the
or
key.
to
Using speed-dialing
To speed-dial the numbers assigned to keys
press and hold the appropriate key.
,
Phone book
39
Searching for and dialing numbers in Phone book
After storing numbers in Phone book, you can search for
them either by name or by caller group.
Searching for a number by name
1. When the idle screen displays, press the Ph.Book soft
key.
2. Highlight Search and press the Select soft key or the
key.
3. Enter the first few letters of the name of the name you
want. The Phone book entries are listed, starting with
the entry that matches or is close to what you entered.
To
Press the
View soft key.
view the highlighted entry
select a different entry
Up or Down key until the
entry you want highlights.
look for a name starting
with a different letter
key labeled with the letter you
want.
4. Once you have found the entry, press the
key to
dial the number, or press the Options soft key or the
key to access the Phone book entry options; for
more details, see page 35.
Phone book
40
Searching for a number by caller group
1. When the idle screen displays, press the Ph.Book soft
key.
2. Use the Up or Down keys to highlight Group Search
and press Select soft key or the
key.
3. Enter the first few letters of the group name that you
want to find.
The caller groups are listed, starting with the entry that
matches or is close to what you entered
4. Use the Up or Down keys to highlight the group you
want and press the View soft key or the
key.
The Phone book entries in the caller group are listed.
To
Press the
view the highlighted entry
View soft key or the
key.
select a different entry
Up or Down key until the
entry you want highlights.
5. Once you have found the entry, press the
key to
dial the number, or press the Options soft key to
access the Phone book entry options; for more details,
Phone book
41
Editing a caller group
1. When the idle screen displays, press the Ph.Book soft
key.
2. Use the Up or Down key to highlight Group Edit and
press Select soft key or the
key.
3. Use the Up or Down key to highlight the group you
want, then press the Options soft key or the
key.
4. Select each option and change the settings, as
required. The following options are available:
•
•
•
•
Call ring tone: allows you to set the ring tone used
when you receive a voice call from a member of that
group.
SMS tone: allows you to set the ring tone used when
you receive a text message from a member of that
group.
Graphic: allows you to set the graphic icon displayed
when you receive a voice call from a member of that
group.
Group name: allows you to assign a name to the
group. For further details about how to enter
5. When you are finished, press the
or
key.
Phone book
42
Deleting all of the Phone book entries
You can delete all your entries from your phone’s memory
and your SIM card, if desired.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Use the Up or Down key to highlight Delete All and
press the Select soft key or the
key.
3. To place a check mark by the memory location you
want to clear, All, SIM, or Phone, highlight the location
and press the
key.
Note: You can remove the check mark by pressing the
key again.
4. Press the Delete soft key to delete the entries in the
selected memory location.
5. Enter the phone password and press the OK soft key or
the
key.
Note: The password is preset to “00000000” at the factory. To change this
password, see page 149.
6. When the confirmation message displays, press the
Yes soft key or the
key. To cancel the deletion,
press the No soft key.
7. When you are finished, press the
or
key.
Phone book
43
Checking the memory status
You can check how many names and numbers are stored
in your Phone book, in both the SIM card and the your
phone’s memory. You can also see the capacity of both
memories.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Use the Up or Down key to highlight Memory Status
and press the Select soft key or the
key.
3. Press the Up or Down key to view the number of the
entries you stored and the total number of the entries
you can store in the SIM card and the phone’s memory.
4. When you are finished, press the soft key or
key.
Setting Your Own Number
This function is a memory aid, which you can use to check
your own phone number if you need to do so.
You can assign a name to each number registered on
your SIM card. You can also edit the names and numbers
displayed.
Note: Any changes made do not in any affect the actual subscriber numbers on
your SIM card.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Use the Up or Down key to highlight Own number and
press the Select soft key or the
key.
Phone book
44
3. Select the Own number option by pressing the Up or
Down key and press the Select soft key or the
key.
4. Select a location and press the Edit soft key or the
key.
5. Enter the number you want to save, and press the OK
soft key or the
key.
6. Enter the name for the number, and press the OK soft
key or the key.
Phone book
45
Phone book
46
Entering text
When using your phone, you will often need to enter text,
such as when storing a name in your Phone book,
creating your personal greeting or scheduling events on
your calendar. You can enter alphanumeric characters by
using your phone’s keypad.
Your phone has the following text input modes:
● T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing the
5
key can enter
J, K, or L. However, the T9 mode automatically compares
the series of keystrokes you make with an internal
linguistic dictionary to determine the most likely word, so
many words require far fewer keystrokes than the
traditional Alphabet mode below.
● Alphabet mode
This modes allow you to enter letters by pressing the key
labeled with the letter you want. You press the key until
the letter or number you want displays.
● Number mode
This mode allows you to enter numbers.
● Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
Entering text
47
Changing the text input mode
When you are in a field that allows character entry, you
will notice the text input mode indicator on the display.
Example: Writing a text message
Create
Text input mode
indicator
Options
To select
Press the right soft key until
T9 mode
Alphabet mode
Number mode
Symbol mode
displays. See page 52.
the symbol list displays. See
Note: Additional text input modes may be available, depending on your
country.
Entering text
48
Using T9 mode
T9 is a predictive text input mode that allows you to key in
characters using single keystrokes. This text input mode is
based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing keys 2 through 9. Press each key only once
for each letter in a word.
For example, to enter “Hello” in T9 mode, press the
following keys:
4
,
3
,
5
,
5
, and
6
keys.
As you type different words may display until enough
letters are entered to match the word you want.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press
or use
the Up or Down key to display alternative word choices
for the keys that you have pressed.
For example, if you type
6,
3, your phone displays “of”;
however, if you wanted “me” press the Up or Down key to
scroll through the other matches until it displays. Your
phone displays the most commonly used choice first.
4. Insert a space by pressing the key.
Entering text
49
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press
or use the Up or Down key to
display an alternative words.
2. When you press
or use the Up or Down key at the
last alternative word, the display shows Add on the
bottom line. Press the Add soft key or the
key.
3. If necessary, clear the word using the
key and
enter the word you want to add using Alphabet mode.
4. Press the OK soft key or the
key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
Note: This feature may not be available for some languages.
● To enter periods, hyphens, or apostrophes, press the
key. T9 mode applies grammar rules to ensure that
correct punctuation is used.
For example, the
key is used twice to display two
punctuation marks below:
L
e
t
’
s
E
a
t
.
● To shift case in T9 mode, use the
key. There are
three cases: Initial capital ( ), Capital lock ( ), and
Lower case ( ).
Entering text
50
● Move the cursor with the Left and Right keys. To delete
letters, press the key. To clear the display, press
and hold
key.
Using Alphabet mode
Use your keypad keys
through
to enter text.
1. Press the key with the letter you want:
- Once for the first letter
- Twice for the second letter, and so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key,
pause briefly and the cursor to move to the right automatically, then
select the next letter.
See the table below for more information about available
characters:
Entering text
51
● To insert a space, press the
key.
● To shift case in Alphabet mode, use the
key. There
are three cases: Capital lock ( ), Lower case ( ), and
Initial capital ( ).
● Move the cursor with the Left and Right keys. To delete
letters, press the
key. To clear the display, press
and hold
key.
Using Number mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the number
you want.
Using Symbol mode
Symbol mode enables you to insert symbols into a text
message.
To
Press the
select a symbol
corresponding number key.
Up or Down key.
display more symbols
clear the symbol(s)
key. When the input field
is empty, this key returns the
display to the previous mode.
insert the symbol(s) into
your message
OK soft key.
cancel your input and return
to the previous mode
soft key.
Entering text
52
Options during a call
Your phone provides a number of control functions that
you can use during a call.
Using the Menu Functions
During a call, you can access the main menu functions.
1. Press the Options soft key. The Options sub menu
displays and Menu is highligted.
2. Press the OK soft key or the
key to display your
phone’s main menus.
3. Use the navigation key to scroll through the menu list.
Note: You cannot use some menus during a call. They are deactivated on this
list.
4. When the menu you want highlights, press the Select
soft key or the
key.
5. If the selected menu has sub-options, repeat steps 3
and 4.
For further details about the menu functions available, see
Placing a call on hold
You can place the current call on hold or make another call
while you have a call in progress if your network supports
this service.
To place a call on hold, simply press the Hold soft key. You
can return to the call by pressing the Resume soft key.
Options during a call
53
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it
up in your Phone book.
2. Press the
key to dial the second call. The first call
is automatically placed on hold.
Note: You can also place your current caller on hold by pressing the Hold soft
key and then making your second call in the normal way.
Swaping calls
When you are on a call and have another call on hold, you
may switch between the two calls by pressing the Swap
soft key.
Your current call is placed on hold and the call on hold is
activated again. To end either call, press the
when you’re finished.
key
Muting a call
You can temporarily switch your phone’s microphone off,
so that the person you’re talking with cannot hear you.
For example, you want to talk with someone while on a
call, but do not want the caller to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight Mute.
3. Press the OK soft key or the
key. The other person
can no longer hear you.
Options during a call
54
To turn the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the OK soft key or the
key. The other person
can hear you again.
Muting/Sending Key Tones
These options allow you to turn the key tones off and on. If
the Mute Keys option is selected, your phone does not
transmit the DTMF (Dual Tone Multi-Frequency) tones of
the associated with each key on your keypad.
Note: To communicate with answering machines or computerized telephone systems,
the Send keys option must be selected.
Sending Sequence of DTMF Tones
This option allows you to send the correct type of tones if
you need to enter a password or account number when
calling an automated system, such as a bank. To send
tones:
1. Press the Options soft key.
2. Highlight the Send DTMF option.
3. Press the OK soft key.
4. Enter the required number and press the OK soft key.
Options during a call
55
Searching for a number in Phone book
You can search for a number in your Phone book during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option.
3. Press the OK soft key or the
key. Your Phone book
entries are listed.
4. Enter the name that you want to find.
If you enter the first few letters of the name, the Phone
book entries are listed starting with the first entry matching
your input.
5. To view the highlighted entry, press the View soft key.
For further details about the Phone book features, see
Using the message service (SMS)
If you receive an SMS (Short Message Service) message
during a call, the Message icon ( ) flashes on the
display. The SMS Service option enables you to read the
message or send a new message. For further details
Call waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have the Call waiting menu (Menu 3.2) set to Activate.
Options during a call
56
You are notified of an incoming call by a call waiting tone.
To answer the call:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
3. To end a call on hold, press the Options soft key or the
key, then select the End Held Call option.
4. To end the current call, press the
key.
Making a multi-party call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up a multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key or the
key, then select Join.
4. Press the OK soft key or the
key.
Options during a call
57
5. To add a new person to the multi-party call, call the
new person in the normal way and then press the
Options soft key or the
key.
6. Select the Conference option and press the OK soft key
or the key.
You can add incoming callers by answering a call and
pressing the Options soft key or the
key, and selecting
Conference. Repeat as required.
Private conversation with only one participant
1. Press the Options soft key or the
key and choose
the Select One option.
2. Press the OK soft key or the
key. The list of call
participants displays.
3. Highlight a person by pressing the Up or Down key, and
press the Select soft key, the key, or the key.
4. Highlight Private, then press the OK soft key or the
key.
Now you can talk privately to the person you selected,
while the other participants continue to talk with each
other.
5. To return to the multi-party call, press the Options soft
key or the
key, then select Conference.
6. Press the OK soft key or the
key.
All of the multi-party call participants will now hear each
other.
Options during a call
58
Dropping one participant
1. Press the Options soft key or the
key, then choose
the Select One option.
2. Press the OK soft key or the
key. The list of call
participants displays.
3. Highlight a person by pressing the Up or Down key, and
press the Select soft key, the key, or the key.
4. Press the Down key to highlight Remove and press the
OK soft key or the key.
The call with that person ends, but you can continue to talk
to the other callers.
5. When you want to end the multi-party call, close the
phone or press the
key.
Options during a call
59
Options during a call
60
Using the menus
You can tailor your phone’s range of functions to your
needs using menus and sub-menus. The menus and sub-
menus on your phone can be accessed by scrolling, using
the Navigation keys, or by using shortcuts.
Accessing a menu by scrolling
1. In Idle mode, press the Menu soft key.
2. Highlight a main menu using the navigation key, like
Settings (Menu 9), then press the Select soft key or
the
key.
3. Scroll using the Up and Down keys to highlight other
menus, and press the Select soft key or the key.
4. If a menu contains an option you want, highlight it using
the Up and Down keys, then press the Select soft key
or the
key. Repeat these steps, if necessary.
To
Press the
scroll through the menus
Up or Down key or use the
and
keys.
confirm the chosen setting
Select soft key or the
key.
return to the previous
menu level
soft key or the Left key.
key.
exit the menu without
changing the settings
Using the menus
61
Using shortcuts
The menus, sub-menus, and options are numbered and
can be accessed quickly by using their shortcut numbers.
For the main menus, press the number keys (
corresponding to their location on the screen.
to
)
Notes:
• The numbers assigned to each menu are indicated on the list on
• For menu number 10, use the
key.
For example, to access the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
4. Press the
key for Settings.
key for Phone Settings.
key for Language. The languages
available display.
List of menu functions
The following list shows the menu structure and indicates
the number assigned to each option and the page where
you can find a description of each feature.
2.1 Missed calls
2.2 Incoming calls
2.3 Outgoing calls
2.4 Delete all
Using the menus
62
2.5 Call time
2.5.1 Last call
2.5.2 Total outgoing
2.5.3 Total incoming
2.5.4 Reset timers
3.1 Call forwarding
3.1.1 Forward always
3.1.2 Busy
3.1.3 No reply
3.1.4 Unreachable
3.1.5 Cancel all
3.2 Call waiting
3.2.1 Voice calls
3.2.2 Data calls
3.2.3 Cancel all
3.3 Network Selection
3.3.1 Automatic
3.3.2 Manual
3.4 Caller ID
3.4.1 Default
3.4.2 Hide number
3.4.3 Send number
5.1 Text Messages
5.1.1 Create
5.1.2 Inbox
5.1.3 Outbox
5.1.4 Templates
Using the menus
63
5.1.5 Settings
5.1.5.1 T-Mobile
5.1.5.2 Setting 2
5.1.5.3 Setting 3
5.1.5.4 Setting 4
5.1.5.5 Common setting
5.1.6 Delete all
5.1.7 Memory status
5.2 Picture messages
5.2.1 Create
5.2.2 Inbox
5.2.3 Outbox
5.2.4 Draft
5.2.5 Templates
5.2.6 Delete all
5.2.7 Memory status
5.3 Browser messages
5.3.1 Inbox
5.3.2 Receive
5.3.3 Delete all
5.4 Voice mail
5.4.1 Call voice mail
5.4.2 Voice server number
6.1 t-zones
6.1.1 Home
6.1.2 Favorite
6.1.3 Go to URL
6.1.4 Clear cache
6.2 Games
6.3 Sounds
6.4 Images
6.5 Delete all
6.6 Memory status
Using the menus
64
7.1 Alarm
7.1.1 Once alarm
7.1.2 Daily alarm
7.1.3 Morning call
7.1.4 Remove alarm
7.1.5 Autopower
7.2 Calendar
7.3 Calculator
7.4 To do list
7.5 Voice memo
7.5.1 Record voice
7.5.2 Voice list
7.5.3 Delete all
7.5.4 Memory status
7.6 Currency Exchange
8.1 Take and send
8.2 Record videos
8.3 My photos
8.4 My videos
8.5 My album
8.6 My journal
8.7 Delete all
8.8 Memory status
9.1 Time & date
9.1.1 Set time
9.1.2 Set date
9.1.3 World time
9.1.4 Time format
9.1.5 Auto update
Using the menus
65
9.2 Phone settings
9.2.1 Language
9.2.2 Greeting message
9.2.3 Short cut
9.2.4 TTY setting
9.2.5 Extra settings
9.3 Display settings
9.3.1 Interior display
9.3.2 Exterior display
9.3.3 Menu style
9.3.4 Back light
9.3.5 Service light
9.3.6 Graphic logo
9.4 Sound settings
9.4.1 Ring tone
9.4.2 Ring volume
9.4.3 Alert type
9.4.4 Keypad tone
9.4.5 Message tone
9.4.6 Folder tone
9.4.7 Power on/off
9.4.8 Alerts on call
9.4.9 Extra tones
9.5 Security
9.5.1 PIN check
9.5.2 Change PIN
9.5.3 Phone lock
9.5.4 Change password
9.5.5 Privacy
*
9.5.6 FDN Mode
*
9.5.7 Change PIN2
9.6 Reset settings
*. Shows only if supported by your SIM card.
Using the menus
66
Voice messages
Using this menu, you can record a voice memo of up to 30
seconds and then immediately send it by a MMS
(Multimedia Message Service) message.
Recording and sending voice messages
1. To record a voice message, select the Voice messages
menu (Menu 1).
2. Press the Record soft key to start recording.
3. Record your memo by speaking into the microphone.
Note: When you press Record, the display shows both the elapsed time and the
remaining time.
4. When you are finished, press the Stop soft key. The
Dest. target screen displays.
Note: If the recording time reaches 30 seconds, your phone displays the Dest.
target screen automatically.
5. Choose one of the following options and press the
Select soft key or the
key.
•
Recent log: allows you to select a number or an
address from the last 10 destinations used for voice
messages.
•
•
Phone number: allows you to enter a phone number
for your message destination.
E-Mail address: allows you to enter the e-mail address
as your message destination.
Voice messages
67
•
Phone book: allows you to retrieve a number from your
Phone book for your message destination.
Note: Press the Options soft key to access the Voice message options. See
page 68 for more information about these options.
6. Enter a number or an e-mail address, or select a
destination from the Phone book or Recent log list.
7. When the number of address you want is displayed,
press the Select soft key or the
key.
8. To add a destination, select Add destination, and press
the Select soft key or the key. Repeat steps 5
through 7 until up to 10 destinations are added.
To edit a destination, hightlight the destination and press
the Select soft key or the
key. You can change or
delete the destination.
9. When you finish entering destinations, highlight Send
message and press the Select soft key or the key.
Your phone sends the message and saves a copy in
the Picture messages Outbox (Menu5.2.3).
Voice message options
After recording a voice message, press the Options soft
key to access the following options:
Replay: plays back your voice message.
Re-record: discards the voice message and allows you to
record another one.
Send: allows you to send the voice message.
Voice messages
68
Call records
In this menu, you can view the:
● calls you missed, received, or dialed
● length of your calls.
Notes:
You can access the numbers in the three call records by pressing the
key in Idle mode.
The number of call records the phone can store may vary, depending on
your SIM card.
Missed calls
The Missed calls menu (Menu 2.1) allows you to view the
20 most recent missed calls. The number or name, if
available, displays together with the time and date the call
was missed. If you select the Options soft key or the
key, you can:
● edit the number and save it in your Phone book.
● delete the call from the list.
To dial a number on the Missed call list, highlight the
number you want to call and press the
key.
Incoming calls
The Incoming calls menu (Menu 2.2) allows to view the 20
most recent calls you have received. The number or
name, if available, displays together with the time and date
the call was received. If you select the Options soft key or
the
key, you can:
● edit the number and save it in your Phone book.
● delete the call from the list.
Call records
69
To dial a number on the Incoming calls menu, highlight the
number you want to call and press the
key.
Outgoing calls
The Outgoing calls menu (Menu 2.3) allows you to view the
last 20 calls you dialed. The number or name displays
together with the time and date the call was made. If you
select the Options soft key or the
key, you can:
● edit the number and save it in your Phone bPhone
bookook.
● delete the call from the list.
To dial a number on the Outgoing calls menu, highlight the
number you want to call and press the
key.
Delete all
To clear all of your call records, select the Delete all menu
(Menu 2.4). You can also delete your call records one at
one time.
To
Press the
select a call record to clear
Up or Down key. To delete all
of your call records, select All
calls.
place or remove a check
mark
key.
delete the marked records
Delete soft key.
When a confirmation message displays, press the Yes soft
key or the
key to confirm.
Call records
70
Call time
Your phone has timers for calls you make and receive. To
view these timers, select the Call time menu (Menu 2.5).
Highlight the timer you want to display its current setting.
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, such as rounding-off for billing
purposes.
The following options are available:
Last call: shows the length of the last call.
Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
Total incoming: shows the total length of all calls you have
received since the timer was last reset.
Reset timers: allows you to reset your call timers. You
must first enter the phone password and then press the
OK soft key or the
key.
Note: The password is preset to “00000000.” To change this password, see
Call records
71
Call records
72
Network services
These menu functions are network services. Please
contact your service provider to check their availability, if
you want to subscribe to them.
Call forwarding
Call forwarding (Menu 3.1) enables incoming calls to be
rerouted to the number that you specify. For example, you
may want to forward your business calls to a colleague
while you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key or the
key.
The following options are available:
•
•
Forward always: all calls are forwarded.
Busy: calls are forwarded when you are already on
another call.
•
•
No reply: calls are forwarded when you do not answer
the phone.
Unreachable: calls are forwarded when you are not in
an area covered by your service provider or when your
phone is switched off.
•
Cancel all: all call forwarding options are canceled.
2. Select the type of calls, voice or data, by pressing the
Up or Down key, and then press the Select soft key or
the
key.
Network services
73
3. The current status displays. If the option is set, the
number that your calls are forwarded to displays.
To
Press the
activate call forwarding
Activate soft key. Go to
step 4.
change the number to be
called
Change soft key. Go to
step 4.
deactivate call forwarding
Remove soft key.
4. Enter the number to which the calls are to be forwarded
and press the OK soft key or the key.
Note: If you are setting options for No reply, you will have to set the amount of
time the network waits before forwarding a call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call waiting
Call Waiting (Menu 3.2) informs you when someone is
trying to call you during another call. You can specify
individual call waiting options for voice calls and/or data
calls.
To set your call waiting options:
1. Select the type of calls, voice or data, that call waiting
option is active for by pressing the Up or Down key and
pressing the Select soft key or the
key.
2. You can activate or deactivate the call waiting feature
using the Activate or deactivate soft key respectively.
To return to the previous screen, press the Exit soft key.
Network services
74
Network selection
This feature (Menu 3.3) enables you to automatically or
manually select the network used when you’re roaming.
Note: You can select a network other than your home network only if a valid
roaming agreement exists between the carriers.
To indicate to automatically or manually select the network
to be used when roaming:
1. Press the Up or Down key until the appropriate option
highlights, then press the OK soft key or the
key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, go to the next step.
2. Press the Up or Down key until the network you want is
highlighted, then press the OK soft key or the
key.
The phone connects to the network selected.
Caller ID
The Caller ID feature (Menu 3.4) allows you to prevent your
phone number from being displayed when you make a
call.
Note: Some networks do not allow you to change this setting.
The following options are available:
Default: the default setting provided by the network is
used.
Hide number: your number does not display on the other
person’s phone.
Send number: your number is sent when you make a call.
Network services
75
Network services
76
IM (Instant message)
Instant Message (IM) is a way of sending short, simple
messages that are delivered immediately to online users.
Before using this feature, you need to subscribe to a
messenger service. For more details, contact your service
provider.
Starting your IM
1. Select a messenger you subscribed to using the Left or
Right key and press the Select soft key or the
key.
2. Enter your screen name to be displayed other phones
or PCs.
3. Press the Down key and enter your password to
connect to the service.
Note: Use the Down key to choose the Save Password option, and press the
key to place a check in the box. Your password will be remembered
when you sign on/connect again.
4. Press the Sign on/Connect soft key to connect to your
messenger service.
Using the instant messenger options
On the sign on screen of the messenger, press the Menu
soft key to use the following options:
Saved Conversations: allows you to review a list of saved
conversations stored in your phone.
Exit: exits the current screen.
IM (Instant message)
77
IM (Instant message)
78
Messages
Using the Messages menu, you can use various message
features, such as:
● text messages
● picture messages
● browser messages
● voice mail
Text messages
SMS (Menu 5.1), which is the Short Message Service,
allows you to send and receive short text messages to
other GSM mobile phones. In addition, your phone
supports EMS, the Enhanced Messaging Service, which
enables you to include simple pictures, melodies, and
animated images in your messages. To use this feature,
you must subscribe to your service provider’s message
service.
When the Message icon ( ) displays, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Create text messages
The Create menu (Menu 5.1.1) allows you to write and
send a text message.
Note: When you add media items to a message, the number of characters
you can enter decreases.
Messages
79
Creating a simple text message
1. Enter your message.
2. When you finish, press the Options soft key or the
key. The following options are available:
•
•
•
•
Send only: allows you to send the message. The
message is deleted after sending.
Save and send: allows you to save a copy of the
message to the Outbox and then send the message.
Save only: allows you to save the message in the
Outbox so that it can be sent later.
For more information about the Text formatting
,
Add
Add
content Add templates Add from phonebook,
,
,
3. Select Send only or Save and send, and press the
Select soft key or the key.
If you only want to save the message, select Save only
.
After saving the message, the phone returns to the Text
messages menu.
4. If you select a save option, select a location and press
the OK soft key or the
key.
5. Enter a destination number and press the OK soft key
or the key. The message is sent.
Note: When the phone fails to send the message, it asks you if you want to
retry. Press the OK soft key to confirm. Otherwise, press the Exit soft
key to return to the message screen.
Messages
80
Creating a message using options
1. Create your message.
2. Press the Options soft key or the
key.
3. Select one of the following options using the Up and
Down keys and pressing the Select soft key or the
key.
•
•
Text formatting: allows you to format the style of the
text.
Note: For the Size attribute, Normal, Large, and Small sizes are available.
For the Bold, Italic, Underline, and Strike through attributes, select
On or Off. The attributes can be combined.
Add content: allows you to add a sound, melody,
picture, or animated image to your message. Select the
category of the item you want to add. In each category,
you can select from the various factory-set items or
choose an item received from other sources, such as
the Internet or other phones.
•
Add templates: allows you to apply one of the preset
message templates to the text. Select one of the 10
items stored in the Templates menu (Menu 5.1.4). For
•
•
Add from phonebook: allows you to add a Phone book
entry to your message. Select one from the list.
Add from favorite: allows you to add a web page’s
address stored in your Favorite list (Menu 6.1.2). Select
one from the list.
•
Language: allows you to change the language to be
used in T9 input mode. Select the language to be used.
Messages
81
4. Complete the message and send or save it by following
the procedure from step 2 on page 80.
Inbox
The Inbox (Menu 5.1.2) is used to store messages that you
have received. When you select this menu, the list of
messages in your inbox displays with the senders’ phone
numbers or names, if they are available in your Phone
book.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous or next message, press the
or
key.
While reading a message, you can choose the following
options by pressing the Options soft key or the
key:
Text reply: allows you to send a reply to the sender.
Forward: allows you to send/resend a message. For more
Delete: allows you to delete a message.
Call back: allows you to call the sender.
Save address: allows you to extract the sender’s number
and URL, e-mail addresses, or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Messages
82
Move to phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only
available for messages stored in the SIM card.
Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only
available for messages stored in the phone’s memory.
Select content: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
Outbox
The Outbox (Menu 5.1.3) is used to store messages that
you have sent or will send. When you enter this menu, the
list of messages in your outbox displays with the
recipients’ phone numbers or names, if they are available
in your Phone book.
1. Select a message from the list and press the View soft
key or the
key to read the message contents.
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous or next message, press the
or
key.
While reading a message, you can choose the following
options by pressing the Options soft key or the
key:
Delete: allows you to delete a message.
Send: allows you to send/resend a message. For more
Messages
83
Save address: allows you to extract the destination
number and URL, e-mail addresses, or phone numbers
from the message text, so that you can save them in your
phone’s memory.
Move to phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only
available for messages stored in the SIM card.
Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only
available for messages stored in the phone’s memory.
Select content: allows you to save the media items, such
as sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
Templates
The Templates menu (Menu 5.1.4) allows you to use one of
the preset messages when you create your message.
Select a message template you want and press the Select
soft key or the
key.
The following options are available:
Edit: allows you to write a new message template or edit
an existing message template.
Send message: allows you to retrieve the message
template. Once you have completed the message, you
can send, save and send, or simply save it. For details
Delete: allows you to delete the message template. You
are asked to confirm the deletion by pressing the Yes soft
key.
Messages
84
Settings
In the Settings menu (Menu 5.1.5), you can set up default
message information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of your
SIM card.
Note: The last setting you accessed is automatically activated for sending
subsequent messages.
T-Mobile/Setting 2 to 4: each group has its the following
options:
Setting name: allows you to give a name to the setting
group currently being defined.
Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default destination: allows you to store a default destination
number. The number automatically displays on the
Destination screen when you create a message.
Default type: allows you to set the default message type to
Text, Fax, Email, or Paging. The network can convert the
messages into the selected format.
Default validity: allows you to set the length of time your text
messages are stored at the message center while
attempts are made to deliver them.
Common setting: the following options are available:
Reply path: allows the recipient of your message to send
you a reply message using your message center, if your
network supports this service.
Messages
85
Delivery reports: allows you to activate or deactivate the
report function. When this function is activated, the
network informs you whether or not your message has
been delivered.
Bearer selection: allows you to choose either GSM or GPRS,
depending on your network.
Character support: allows you to choose a character type
from GSM-alphabet, Uni-code, or Automatic. If you select
Uni-Code and your recipient’s phone does not support it,
your recipient may not be able to read your message.
Delete all
The Delete all menu (Menu 5.1.6) allows you to delete all of
the text messages in each message box. You can also
delete all of your messages one at a time.
1. Select the message folders you want to clear.
To
Press the
select a message box to
clear
Up or Down key. To delete all of
your messages, select All
messages.
place or remove a check
mark
key.
delete the marked
objects
Delete soft key.
2. Press the Delete soft key to delete the boxes you
marked.
Messages
86
3. When the “Delete all?” confirmation displays, press the
Yes soft key or the
key. Your phone displays, “Are
You Sure?”
4. To delete the messages you selected, press the Yes
soft key.
Memory status
You can check how may messages are stored in the SIM
and phone memory using Memory status (Menu 5.1.7).
Press the Up or Down key to view the number of
messages you have stored and the total number of
messages you can store in the SIM or phone memory.
Picture messages
The Picture Messages menu (Menu 5.2) allows you to use
the Multimedia Message Service (MMS), which is a
messaging service similar to SMS. It provides automatic
and immediate delivery of personal multimedia messages
from phone to phone or from phone to e-mail.
In addition to text messages, multimedia messages can
contain images, graphics, voice, and audio clips, so your
MMS messages are really multimedia presentations in
single files and not just a text files with attachments.
MMS is available only if it is supported by your service
provider and only on phones that offer multimedia
messaging features.
Messages
87
Create picture messages
The Create menu (Menu 5.2.1) allows you to create a new
multimedia message and send it to one or more
destinations.
Creating and sending a multimedia message
1. When Add subject is highlighted, press the Select soft
key or the
key.
2. Enter the subject of your message, and press the OK
soft key or the key.
3. When Add content is highlighted, press the Select soft
key or the
key.
•
•
Add text: allows you to add a message text.
Add my photo: allows you to add a photo. You can
take a new photo or select a saved photo. For more
•
•
Add my video: allows you to add a video. You can
record a new video or select a saved video.
Add picture: allows you to add an image. You can add
downloaded images if they are in the correct format
and your service provider supports them.
•
Add sound: allows you to add a sound. You can record
a new voice memo or select a saved voice memo.
4. After adding text, photo, video, a picture, or a sound,
press the OK soft key or the key.
Messages
88
5. To add more contents, press the Options soft key or
the key when Add here is highlighted. Repeat step
3 and 4.
Note: You can add text, an image, and a sound only once for each page.
6. To change the text or replace an image or sound with
another one, select the item and press the Options soft
key or the
key.
You can access the following options:
•
•
Send in message: allows you to send the message.
Use this option when you finish creating your message.
Send to My album: allows you to send the message to
your online album provided by your service provider.
For more details about My Album, contact your service
provider.
•
Send to My journal: allows you to send the message to
your online provided by your service provider. For
further details about My Journal, contact your service
provider.
•
•
•
•
Add content: allows you to add text, a photo, video, a
picture, or sound with another one.
Add subject: allows you to change the message
subject
Save: saves the message in the Draft
(Menu 5.2.4) or
Templates Menu 5.2.6) box for later use.
(
Settings: allows you to change the message settings.
For further details about each setting option, see “Using
Messages
89
•
•
Add destination: allows you to enter destination
numbers or addresses. Select a destination type (To,
Cc, or Bcc), then press the Select soft key or the
key. Follow steps 8 through 10, and after adding the
destinations, press the
options screen.
or
key to return to the
Preview: shows the message you created.
7. When you have finished creating the message, choose
Send in message under Options, and press the Select
soft key or the
key.
8. Choose the one of the following options and press the
Select soft key or the key:
Recent log: allows you to select a number or an address
from the 10 last destinations you used for picture
messages.
Phone number: allows you to enter a phone number you
want.
E-mail address: allows you to enter the e-mail address of
the recipient.
Phone book: allows you to retrieve a number from your
Phone book.
9. Enter a number or an e-mail address, or select a
number from Phone book.
10.When the correct number or address displays, press
the OK soft key or the
key.
11.To add a destination, press the Select soft key or the
key when Add destination highlights. Repeat from
step 8 through 10.
Messages
90
If you want to edit the destinations, select one and press
the Select soft key or the
key. You can change or
delete it.
12.When you have finished entering the destinations,
select Send message and press the Select soft key or
the
key. Your phone sends the message.
Using message setting options
When you select Settings from the message options, the
following options are available:
Delivery report: when enabled, the network informs you
whether or not your message has been delivered.
Read reply: when enabled, your phone sends a request for
a reply along with your message to the recipient.
Expiry date: you can select the time your messages are
stored in the message center after they are sent.
Delivery time: you can set a delay time before your phone
sends your messages.
Priority: you can select the priority level of your messages.
Inbox
Viewing a message when received
When you receive a new multimedia message, your
phone’s display shows the MMS Message icon ( ), a
text notification, and the sender’s number.
1. Press the Select soft key or the
key to view a
summary about the message, such as the sender’s
number, the message size and its subject.
Messages
91
To save the message so you can view it later, press the
Exit soft key.
2. To scroll through the message information, press the
Up or Down key.
3. Press the Options soft key or the
key to use the
following options:
•
•
•
Retrieve: retrieves the message from the MMS server.
Delete: deletes the message.
Properties: shows you detailed information about the
message.
4. To read the message, press the Select soft key or the
key when Retrieve is highlighted. Your phone
retrieves the message and displays it.
5. To scroll through the message, press the Up or Down
key.
6. When you are finished, press the
key.
Viewing a message in the Inbox
When you access the Inbox menu (Menu 5.2.2), a list of
multimedia messages you received is displayed. The
icons below indicate the status of your messages:
●
●
: MMS notifications that have been opened.
: MMS notifications that have not been opened.
●
: You have sent an enquiry to the MMS server
requesting the message be sent to your phone.
●
: The MMS server is processing your request.
Messages
92
●
: The MMS server is unable to send the message to
your phone.
●
●
: Messages that have been opened.
: Messages that have not been opened.
1. Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to additional pages, if
necessary.
2. Press the OK soft key or the
key to go to the
message view screen.
3. Use the Up or Down key to scroll through the message.
If the message has more than one page, use the Left
and Right keys to scroll through all the pages.
4. To scroll to the previous or next message, press the
or
key.
When viewing messages retrieved from the MMS server,
these options are available by pressing the Options soft
key:
Reply: allows you to reply to the sender by sending a text
or multimedia message.
Save content: allows you to save media items, such as
pictures, videos, or sounds from the message into your phone's
memory.
Delete: deletes the message.
Call back: allows you to call the sender.
Forward: allows you to forward the message to another
person.
Messages
93
Save address: allows you to extract the sender’s number
or e-mail address and URL, other e-mail addresses or
phone numbers from the message text.
Save Picture: allows you to save an image from the
message into your phone. Images are stored in the
Images folder (Menu 6.4).
Save Sound: allows you to save a sound from the
message into the Sounds folder (Menu 6.3).
Properties: shows you information about the message,
such as the subject, sender’s e-mail address or phone
number, message size, recipient’s e-mail address or
phone number, its priority, and the time and date the
message was received.
Outbox
The Outbox menu (Menu 5.2.3) lists the multimedia
messages you have sent or saved. The icons below
indicate the status of your messages:
●
●
●
●
: Messages currently being sent
: Messages sent
: Messages your phone couldn’t send
: Messages to be sent
●
: Messages deferred
1. Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to additional pages, if
necessary.
Messages
94
2. Press the OK soft key to go to the message view
screen.
3. Use the Up or Down key to scroll through the message.
If the message has more than one page, use the Left
and Right keys to scroll through all the pages.
4. To scroll to the previous or next message, press the
or
key.
When viewing messages, you can choose these options
by pressing the Options soft key or the
key:
Delete: deletes the message.
Save address: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail addresses
or phone numbers from the message text.
Send: allows you to send/resend the message.
Edit: allows you to change the message contents, sound,
photo, or text.
Properties: shows you information about the message,
such as the status, subject, sender’s e-mail address or
phone number, message size, transaction ID, MMS
version, and the time and date the message was sent.
Draft
After creating a multimedia message, you can store it in
the Draft message box (Menu 5.2.4) so that you can send it
at a later time. For more details about viewing a message,
Messages
95
Templates
The Templates menu (Menu 5.2.5) allows you to save
messages to be used as templates for other message you
compose.
1. Scroll through the template list using the Up and Down
keys.
2. Highlight the message template you want, and press
the Select soft key or the
key.
3. Press the OK soft key to select from the following
options:
•
Edit: allows you to send a message using the template.
For more details about how to send a message, see
•
Delete: allows you to delete the message template. If
selected, press the Yes soft key to confirm your choice.
4. Press the
key to return to Idle mode.
Delete all
Delete all (Menu 5.2.6) allows you to delete all of the
multimedia messages at one time, or allows you to delete
all the messages in each message box one at a time.
To
Press the
select a message box to
clear
Up or Down key. To delete all of
your messages, select All
messages.
Messages
96
To
Press the
place or remove a check
mark
key.
Delete soft key.
delete the marked
messages
When the confirmation message displays, press the Yes
soft key or the
messages.
key to confirm the deletion of your
Memory status
Using Memory Status (Menu 5.2.7) you can check the
memory used and the memory remaining for multimedia
messages. The display shows the total space, including
the used and free space. You can also view how much
space is currently occupied by each message box.
Browser messages
The Browser messages menu (Menu 5.3) allows you to
receive web messages from the server or set your phone
not to receive these messages.
The following options are available:
Inbox: allows you to read the messages received from the
web server.
Receive: allows you to set whether or not your phone
receives web messages.
Delete all: allows you to delete all of the web messages.
Messages
97
Voice mail
The Voice mail menu (Menu 5.4) is used to specify the way
your phone access you voice mailbox, or to edit the
number used for accessing voice mail.
The following options are available:
Call voice mail: to use the Voice Mail feature, you must
enter the voice server number from your service provider.
You can then select this option and press the OK soft key
or the
key to listen to your messages.
Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider for
additional details.
Messages
98
Funbox
The Funbox menu contains many enjoyable options.
t-zones
Your phone is equipped with a WAP (Wireless Application
Protocol) browser so you can access and navigate the
Wireless Web. The t-zones menu (Menu 6.1) lists the
options available for your phone’s browser.
Home
The Home menu (Menu 6.1.1) connects your phone to the
network and loads your Wireless Web service provider’s
homepage. You can also press the
key in Idle mode to
launch the browser. The content of the WAP Browser
startup homepage depends on your service provider. To
scroll through the screen, use the Up and Down keys.
Note: To go to the startup homepage from any other screen in the WAP
Browser, use the Home option. For more information on the WAP
Exiting the WAP browser
To exit the browser, simply press the
and hold the key.
key or press
Funbox
99
Navigating the WAP browser
To
Press the
scroll through browser
items
Up or Down keys.
select browser items
Options soft key, then choose
Select.
select a numbered item
corresponding numeric key.
return to the previous page
soft key or the
key.
return to the startup
homepage
Options soft key, then choose
the Home menu. For more
details about this option, see
Entering text in the WAP browser
When you are prompted to enter text, the active text input
mode is indicated on the screen.
The following modes are available:
Upper-case character mode (A): allows you to enter upper-
case English characters.
Lower-case character mode (a): allows you to enter lower-
case English characters.
Note: You can enter symbols in upper or lower-case character mode by
pressing the 1 key.
Number mode (1): allows you to enter numbers.
Funbox
100
To change the
text input mode
Press the
Press the
key one or more times.
key.
To enter a space
To edit text
● Set the cursor to the right of the
character(s) to be corrected.
● Press the
key as required.
● Enter the correct character(s).
Selecting and using menu options
Various menus are available when using the WAP
Browser to navigate the Wireless Web. To access a menu
option:
1. Press the Options soft key. A pop-up menu displays.
2. Highlight a menu by pressing the Up and Down keys.
3. Select an option by pressing the Select soft key or the
key.
4. If necessary, select a secondary option using the Up
and Down keys, and press the Select soft key or the
key to confirm.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
Favorite: displays a list of your favorite web addresses.
Reload: reloads the current page.
Home: takes you back to the homepage of your Wireless
Web service provider.
Funbox
101
Goto URL: allows you to manually enter the URL address
of a Web page. After entering an address, press the OK
soft key to visit the site.
Show URL: displays the URL address of the site your are
visiting. It also enables you to declare the current site as
the startup homepage.
To
Press the
declare the current page
as your startup
homepage
Option soft key, select the Save
To Home option and press the
Select soft key.
set a bookmark for the
current page
Option soft key, select the Save
To Bookmark option and press
the Select soft key.
cancel your setting
soft key.
Clear cache: clears your phones temporary memory used
to store recently accessed Web pages.
Security info: displays the current data transmission mode
and allows you to choose either Secure or Non-secure
modes.
Inbox: allows you to display Web messages you have
received from the server.
Show images: allows you to display image files you have
downloaded or received from the server.
Favorites
The Favorite menu (Menu 6.1.2) allows you to store up to
10 Web addresses, called URLs.
Funbox
102
Note: Even though default sites have been entered by your provider, all
Favorite locations can be changed.
To store a URL address:
1. Select an empty location and press the Options soft
key or the
key.
2. Enter the URL and press the Enter soft key or the
key.
3. Enter a name for the favorite item and press the Enter
soft key or the
key.
After saving favorite items, you can use the following
options by pressing the Options soft key or the
key:
Goto URL: takes you to the site.
Edit: allows you to edit the address.
Delete: deletes the address.
Go to URL
This menu (Menu 6.1.3) allows you to manually enter the
URL address of a web site that you wish to access.
Clear cache
To clear the information stored in cache, which is the
phone’s temporary memory for most recently accessed
Web pages, select the Clear cache menu (Menu 6.1.4)
option. Press the Yes soft key to clear the memory, or
press No to cancel.
Funbox
103
Games
The Games menu (Menu 6.2) allows you to MIDlets (Java
applications that run on mobile phones) from various
sources using the WAP Browser and then store them in
your phone.
When you access the Games menu, the list of default
games displays. Once you download a game, it is added
to the list.
Note: Java services may not be available, depending on your service
provider.
Downloading a new game
You can download more games from the web site preset
by your service provider using the New games option.
Launching a MIDlet
Note: The procedure explained below is for the default games. For downloaded
games, the procedure may be different.
1. Highlight the MIDlet you want on the Games list and
press the Launch soft key or the
key.
2. On the startup screen, use your Up and Down keys to
select from one of the following options:
•
•
Start Game: starts a new game.
Continue: allows you to continue the last game you
played.
•
High Score: shows the high score table. This option
may not be available for some games.
Funbox
104
•
•
How to Play: shows how to play the game and the key
functions for the game.
Option: allows you to switch the game sound on or off.
3. Press the
key to confirm your selection.
While playing a game, to
Press the
Volume keys.
adjust the sound volume
stop the game and return to the
startup screen
key.
key.
exit the game
Viewing MIDlet information
1. Scroll to the MIDlet you want and press the Info soft
key.
The display shows information about the MIDlet, such as
the file size, application version, and its vendor.
2. To scroll to other MIDlet information, press the
Navigation keys.
3. If you want to delete MIDlet, press the Delete soft key
and then press the Yes soft key to confirm the deletion.
Note: When you select default games from the list, the Delete option is not
available.
4. To exit and return to the Games list, press the soft
key or the
key.
Funbox
105
Entering text during play
If you need to enter text while using a MIDlet, you can use
the following input modes:
Upper-case character mode (A): allows you to enter upper-
case English characters.
Lower-case character mode (a): allows you to enter lower-
case English characters.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys,
press the
key to insert it.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can change
the case by pressing the
key.
To change the text input mode, press the
key until the
appropriate indicator appears on the soft key area of the
display.
Sounds
The Sounds menu (Menu 6.3) lists the sounds that have
been downloaded from the web server or received in
multimedia messages. You can select a sound on this
menu to be current ring tone or you can send them to
other phones.
Note: When the memory is full, a warning message displays and you cannot
store new sounds until you free-up memory by deleting some of your
saved sound files.
Scroll to the sound you want to listen and press the
Play(bold) soft key or the
key.
Funbox
106
Press the Options soft key or the
key to use these
options:
Rename: allows you to change the name of the sound.
Delete: allows you to delete the sound.
Set as ring tone: sets the sound as your ring tone.
Using the New MegaTones option on the sounds list, you
can access the web site preset by your service provider
and download new sounds.
Images
Use the Images menu (Menu 6.4) to list the pictures
downloaded from the web server or received in messages.
You can select an image for your current background or
send them it to other phones. If you set a photo as your
wallpaper, it is designated as My Photo on the list.
Note: When memory is full, a warning message displays and you cannot
store new images until you free-up memory by deleting some of your
saved image files.
Scroll to the image you want to view and press the
View(bold) soft key or the
key.
Press the Options soft key or the
key to use these
options:
Rename: allows you to change the name of the image.
Delete: allows you to delete the image.
Set as wallpaper: sets the image as your wallpaper for the
idle screen.
Using the New wallpapers option on the images list, you
can access the web site preset by your service provider
and download new images.
Funbox
107
Delete all
This menu allows you to delete all of the downloaded
items in the Games, Sounds and Images folders at one
time or delete all the items in each of these folders
separately.
To
Press the
select a folder to clear
Up or Down keys. To delete all
of your items, select All.
place or remove a check
mark
key.
delete the marked items
Delete soft key.
When a confirmation message displays, press the Yes soft
key or the key to delete the items you selected.
Memory status
You can check the amount of memory used and the
memory remaining for games or sounds and images
(Menu 6.6).
Games
When you select this menu, the total memory available,
the memory used, and free memory left displays. You also
see the number of games downloaded.
Funbox
108
Sounds & Images
When you select this menu, the total memory available,
the memory used, and free memory left displays. You also
see the how much memory has been used for the sounds
and for the images downloaded.
Funbox
109
Funbox
110
Organizer
The Organizer feature enables you to:
● set the alarm so that your phone rings at a specific
time, for example, to remind you of an appointment
● view the calendar and organize your schedule
● define a list of things to do
● use the phone as a calculator for basic mathematical
equations or currency exchange operations
● record voice memos.
Alarm
The alarm feature (Menu 7.1) allows you to:
● set an alarm to ring at a specific time
● set the phone to ring an alarm even if it’s switched off.
Alarm Types
The following types of alarms are available:
Once alarm: the alarm rings only once and is then
deactivated.
Daily alarm: the alarm rings every day at the same time.
Morning call: the alarm rings to wake you up in the
morning.
To set an alarm:
1. Choose the type of alarm you want to set, and press
the Select soft key or the
key.
2. Enter the time for the alarm to sound.
Organizer
111
If you want to use the alarm options, press the Options
soft key. The following options are available:
•
•
Remove alarm: deactivates the current alarm.
Alarm sound set: allows you to select an alarm
melody.
3. Press the OK soft key or the
key
4. If applicable, select AM or PM and press the Select soft
key or the key.
5. If you’re setting a Morning call alarm, choose the
repeat option, Monday to friday or Monday to saturday,
and press the Select soft key or the
key.
To stop the alarm when it rings, open your phone and
press the Exit soft key, Volume keys, key, key,
or key.
Remove alarms
The remove alarm option deactivates all alarm settings.
When this option is available, you have alarm times set
and have activated one or more types of alarms. To
deactivate all alarms, highlight this option and press
Select, then press the Yes soft key or the
key when the
confirmation message displays.
Autopower
When Autopower is enabled, the alarm rings at the
specified time, even if the phone is switched off. After the
alarm sounds, your phone turns off automatically.
If the option is disabled, alarms will not sound when your
phone is turned off.
Organizer
112
Calendar
With the Calendar feature, you can:
● consult the calendar and check your memos
● write memos to keep track of your schedule
● set an alarm to act as a reminder.
Reviewing your calendar
When you select the Calendar menu (Menu 7.2), your
calendar displays with the current date highlighted. The
following options are available when you press the Options
soft key:
Search all: displays all memos in your calendar, starting
with the oldest. Use the Up and Down keys to highlight a
specific memo.
Delete all: allows you to delete all of the memos in your
calendar. You are asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to Idle mode.
Writing calendar memos
To write or edit a memo for a specific date:
1. Select a date on the calendar, using the Navigation
keys.
Note: To skip to the previous or next month, press the Volume keys on the left
side of the phone.
2. Press the
key. A memo screen displays to allow
you to write your memo.
Organizer
113
3. Enter your memo and then press the OK soft key or the
key. You are asked if you want to set an alarm.
4. If you want the alarm to ring on the chosen day, press
the Yes soft key or the
key, then set the time for the
alarm and press the OK soft key.
Note: Your phone is preset to a 12-hour format. To change the time format, see
Otherwise, press the No soft key. The memo is saved and
the display returns to the calendar.
5. If you pressed the Yes soft key or the
key, set the
time for the alarm and press the OK soft key or the
key.
6. If applicable, select AM or PM and press the Select soft
key or the
key.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
Viewing a memo
To view a memo you have previously stored, follow these
steps:
1. Display your Calendar and select the day you want to
review.
Note: If more than one memo exists, the last memo entered displays.
2. Use the up or down key to scroll to the previous or next
memo, then press the Options soft key or the
key
for these options:
Organizer
114
New: allows you to add a new memo for the day.
Edit: allows you to change the memo text.
Alarm: allows you to set the alarm to ring at the
specified time to remind you of the memo. If you have
already set an alarm for that memo, you can change or
delete the alarm.
Delete: deletes the memo.
Copy to: allows you to copy the memo to another date
or time.
Move to: allows you to change the time or date of the
memo.
Calculator
The Calculator function (Menu 7.3) allows you to use your
phone as a calculator. The calculator provides basic
arithmetic functions, such as addition, subtraction,
multiplication, and division.
1. Enter the first number using your numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the
symbol you want displays.
2. Enter the operation for your calculation by pressing the
Navigation keys, according to the illustration on the
display.
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
Organizer
115
To do list
This feature allows you to create task lists for a particular
day, and then use helpful options that allow you to set
priorities and sort your lists once complete. The To Do List
menu (Menu 7.4) allows you to:
● enter a list of tasks to be done
● assign a priority and a deadline to each task
● sort tasks by priority and status.
Creating the To do list
1. Press the New soft key.
2. Enter the task, and press the OK soft key or the
key.
3. Select a priority level for the task. Choose high, normal,
or low priority using the Up or Down keys, then press
the Select soft key or the
key.
4. Enter your deadline and press the OK soft key or the
key.
Note: If you do not want to set a deadline, press the Skip soft key.
Editing the To do list
When you select the To do list menu, the tasks you have
entered display together with a status box and a priority
symbol. To change a task’s status, highlight it and press
the
key to either mark or unmark the task as complete.
Organizer
116
The priority was set when you entered the task, so you will
see one of the following indicators:
for High
for Normal
for Low.
To view the options for each task, press the Options soft
key or the
key and select one of the following:
New: allows you to create a new task.
Mark: allows you to change the status of the current task
to either Done or Undo.
Edit: allows you to change the text, priority, and the
deadline for the current task.
Sort: allows you to sort existing tasks by their priority
status. Select the sort criteria, High, Low, Done, or Undo.
Copy: makes a copy of the current task.
Copy to calendar: allows you to copy the current task as a
calendar memo. You can change the text and deadline for
the task, and set an alarm.
Delete: deletes the current task.
Delete all: allows you to delete all of your tasks.
Exit: returns you to the idle screen.
Organizer
117
Voice memo
You can record a Voice memo (Menu 7.5) and send them to
others using MMS (Multimedia Message Service).
Record voice
This menu allows you to record a new voice memo. When
you select this option, the display shows a 30-second
timer.
1. To start recording, press the Record soft key or the
key.
2. Record a memo by speaking into the microphone.
3. When you press the Stop soft key or the
key, or if
the recording time expires, the following options
display:
•
•
Replay: plays back your memo.
Re-record: discards the memo and enables you to
record another one.
•
•
Save: allows you to save the memo.
Quit: cancels your recording and exits the Record
voice menu.
4. To save the memo, choose Save and press the Select
soft key or the
key.
5. Press the
key to clear the default name, if
necessary, and enter a name for the memo.
Organizer
118
6. Press the OK soft key or the
key. The memo is
saved and then the display shows the memo
information.
7. Press the Options soft key to use the following memo
options:
•
Send: allows you to send the memo to other people by
using the MMS feature. For details about sending a
•
•
Rename: allows you to change the memo’s name.
Delete: allows you to delete the memo.
8. To exit, press the soft key or
key.
Voice list
This menu shows a list of saved voice memos. Scroll to a
memo and press the Options soft key or the
following options are available:
Play: plays the memo.
key. The
Send: allows you to send the memo to other people by
about sending a message.
Rename: allows you to change the memo’s name.
Information: displays information about the memo, such
as the name, the date when the memo was made,
recording duration, and memory size.
Delete: allows you to delete the memo.
Organizer
119
Delete all
Using this menu, you can delete all of your voice memos.
When the confirmation message displays, press the Yes
soft key. To cancel the deletion, press the No soft key.
Memory status
You can check the amount of memory being used and the
memory remaining for voice memos.
The display shows you the total, free, and used memory,
including the number of memos you stored and the total
number of memos you can store.
Currency exchange
Using the Currency Exchange menu (Menu 7.6), you can
easily determine many currency conversions.
1. Enter the current Exchange Rate for your base
currency and press the OK soft key or the
key.
You can insert a decimal point by pressing the
key.
2. Enter the amount of Local Currency that you want to
convert and press the OK soft key or the key.
The Exchange Rate, Local Currency amount, and the
Foreign Currency amount display.
3. Press the Exit soft key to quit the exchange calculator.
Organizer
120
Camera
Using the camera module in your phone, you can take
photos of people or events while on the move.
Additionally, you can send photos to other people in a
multimedia message or set one as wallpaper or a caller ID
image for a Phone book entry.
You can also record videos using your phone as a
camcorder.
Note: You can quickly access the Camera menu by pressing the Up key in
Idle mode.
CAUTION:
•
•
•
Do not take photos of people without their permission.
Do not take photos in a place where cameras are not allowed.
Do not take photos in a place where you may interfere with another
person’s privacy.
Take and send
The Take and send menu (Menu 8.1) allows you to take
photos. Your camera produces JPEG photos.
You can take photos with the phone open or closed. When
the phone is closed, you can use the external display.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
Camera
121
Taking a photo with the phone open
1. Accessing the Take and send menu turns the camera
on or you can press and hold the Up key in Idle mode.
The image to be captured appears on the display.
2. Adjust the image by aiming the camera at the subject.
When you press the left soft key, you can use the
camera options. For details, see page 123.
Note: You can change the image settings switch to other modes by using the
3. Press the
key to take the photo.
4. Press the Save soft key. To discard the photo, press
the Cancel soft key.
To
Press the
use the photo options
Next soft key. See “Using the
camera options” on
return to Capture mode
return to Idle mode
New Photo soft key.
key.
Using the keypad in Capture mode
You can use the number keys to customize your camera
settings when you are in Capture mode. The following
table lists the functions for each key.
Camera
122
Key
Function
1
2
4
5
switches to Record Videos mode. See page 126.
changes the image size.
Switches to Multi shot mode.
changes the color tone or apply a special effect to
the photo.
6
clears white lines on the image
selects a decorated frame.
7
8
sets the timer.
9
zooms in or out.
Up/Down
Left/Right
adjusts the brightness of the image.
flips the image vertically or horizontally.
/
Using the camera options
In Capture mode, you can access various options for the
camera by pressing the left soft key. The following options
are available:
Effects: allows you to change the color tone or apply a
special effect to the photo.
Frames: allows you to use a decorated frame. Select a
frame from the list using the Navigation keys.
Camera
123
Mode: allows you to take a photo in various modes. Once
you change the mode, an indicator appears at the top left
of the display.
Normal shot: allows you to take a photo in the normal mode.
Multi shot: allows you to take a series of action stills.
Choose the capture speed, High speed or Normal speed,
then select the the number of photos for the camera to
take. When you press Camera key on the right side of the
phone or the
successively.
key, the camera takes the photos
Note: After taking photos, press the Save All soft key to save all of them or the
Save soft key to save a selected one.
Night shot: allows you to take a photo of the best quality
when it is dark.
Rotation: allows you to rotate the photo. You can see its
mirror image, flip the photo vertically, or do both at the
same time.
Self Timer: allows you to set a delay time before the
camera takes the photo. Select the length of delay you
want. When you press the Camera key or the
camera takes the photo after the specified time.
key, the
Photo size: sets the image size to either VGA(640x480),
QVGA(320x240), QQVGA(160x120), or Mobile(128x120).
The selected image size displays on the capture screen.
Camera
124
Taking a photo with the phone closed
Note: If the external display turns off, you first need to turn it on by pressing
and holding one of the Volume keys.
1. When the phone is closed, press and hold the Camera
( ) key on the right side of the phone.
The image to be captured appears on the external display
as a mirror image.
2. Adjust the image by aiming the camera at the subject.
•
•
To adjust the brightness of the image, press the
To zoom in or out the image, press the key.
key.
3. Press the Camera key to take the photo.
Your phone automatically saves the photo and returns to
Capture mode.
My photos
Use My photos (Menu 8.3) to review your photos. When
you select this menu, your phone displays the photos in
Thumbnail mode, so that you can quickly scroll through
them. Use the Navigation keys to scroll through the
photos.
To view the photos on the full screen, press the
To go back to Thumbnail mode, press the soft key.
key to use the
key.
Press the Options soft key or the
following options:
Send: allows you to send the photo as a multimedia
Camera
125
Set as Wallpaper: allows you to set the photo as your
wallpaper for the idle screen.
Set as Caller ID: allows you to set the photo as a caller ID
image for a Phone book entry.
Protection: allows you to protect the photo from being
deleted.
Delete: allows you to delete the photo.
Rename: allows you to change the name of the photo.
Properties: shows the properties of the photos, such as
the file name, the time and date it was recorded, photo
size, file size, file format, protection status, and photo
quality.
Record videos
Use the Record Videos menu (Menu 8.2) to record a video
using your phone as a camcorder.
1. When the camera feature turns on, adjust the image by
aiming the camera at the subject.
•
•
•
Press the Up or Down key to zoom in or out the image.
You can also use the Volume keys.
Press the Left or Right key to adjust the image
brightness.
Press the
key to switch to Capture mode.
2. Press the Record soft key to start recording.
3. When you are finished, press the Stop soft key to stop
recording.
Note: The phone automatically stops when the recording time expires.
Camera
126
4. Press the Save soft key or the
key.
Note: To return to Record mode, press the Discard soft key.
5. After saving your video, you can select one of these
options.
To
Press the
use the video options
Next soft key. For more
details, see Option
under “My Videos” on
return to record mode
return to Idle mode
New Video soft key.
key.
My videos
The My videos menu (Menu 8.4) displays a list of videos
you have recorded.
To play a video:
1. Select the video you want to view using the Up or
Down key.
2. Press the Select soft or the
key to start playing the
video.
Note: To replay your video, press the Resume soft key.
While playing a video press the Next soft key or the
key to access the following options:
Send: allows you to send a video file as a part of a multimedia
Camera
127
Replay: plays back a video file.
Rename: allows you to change the file name.
Delete: allows you to delete the current video file.
Protection: allows you to protect the video from being
deleted.
Properties: shows the properties of the video, such as the
file name, the time and date it was recorded, file size, and
protection status.
My album
My album (Menu 8.5) provides you with the ability to store
your photos using the t-zone browser.
When you take a photo and select the Save soft key, your
phone prompts you with option to select Next or
NewPhoto. Use the following steps to send a photo to your
album:
1. Select Next to go to the Photo Menu.
2. Select Send and then press the OK soft key.
3. Select Send to my album. The Picture Messages
displays, and your photo is stored in the Picture
Outbox, then sent to your album.
My journal
My journal (Menu 8.6) provides you the ability to store your
photos using the t-zone browser. When you take a photo
and select Save, your phone prompts you with option to
select Next or NewPhoto.
Camera
128
Use the following steps to send a photo to your journal:
1. Select Next to go to the Photo Menu.
2. Select Send and then press the OK soft key.
3. Select Send to my journal. The Picture Messages
displays, and your photo is stored in the Picture
Outbox, then sent to your journal.
Delete all
The Delete all menu (Menu 8.7) allows you to delete your
photos or videos.
1. You can delete all of the items at once or delete the
items in individual folders.
To
Press the
select a folder to clear
Up or Down key. To delete all of
your items, select All.
place or remove a check
mark
key.
2. Press the Delete soft key to delete the marked items.
3. When a confirmation message displays, press the Yes
soft key or the
key.
4. When the phone asks for confirmation again, press the
Yes soft key or the key to confirm.
Camera
129
Settings
In this menu, you can customize your phone’s various
settings, such as:
● time and date
● phone settings
● display settings
● sound settings
● security
● reset settings
Time & Date
The Time & Date menu (Menu 9.1) is used to set the
current time and date, view time in other parts of the
world, change the format for how time is displayed on your
phone, or to set the time to be automatically updated.
The following options are available:
Set time: allows you to enter the current time.
Note: Before setting the time, you must specify your time zone in the World time
menu (Menu 9.1.3).
Set date: allows you to enter the month, day, and year.
World time: allows you to view the time it is another part of
world, using the Left and Right keys.
The screen shows:
● the selected city time and the time difference between
your city and the city you want to view
● current time and date in the selected city
● city selected as your time zone
● current time and date in your city.
Settings
131
To select your time zone:
1. Select the city corresponding to your time zone by
pressing the Left or Right key. The local date and time
display.
2. Press the Set soft key or the
key.
Time format: allows you to change the time format to 12
hours or 24 hours.
Auto update: allows you to receive time information from
your service provider’s network.
Off: you set the time and date according to the current time
zone using the Set time menu.
On: your phone automatically updates the time and date
according to the network’s time zone.
Confirm First: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date does not change the time you have
set for alarm settings or calendar memos.
Phone settings
Many different features of your phone can be customized
to suit your preferences using the Phone settings menu
(Menu 9.2). The following features are available.
Language
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Note: Depending on your country, service provider, or the software version of
the phone, the Automatic option may not display.
Settings
132
Greeting message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on. For details about
Short cut
The Key Down, Left, and Right keys can be used as
shortcut keys. In Idle mode, they allow you to access
specific menus directly.
To assign a shortcut to a key:
1. Select the key you want to use as a shortcut key by
pressing the Up or Down keys, and press the Select
soft key or the
key.
2. Select the menu to be assigned to the key by pressing
the Up or Down key.
Note: To deactivate a shortcut key, select the None option.
3. Press the Select soft key or the
key to save the
selection.
TTY setting
TTY is a telecommunications device that allows people
who are hearing impaired, or who have speech or
language disabilities, to communicate by telephone. In this
menu, you can enable your phone’s TTY feature.
Settings
133
The following options are available:
Disable: does not allow you to communicate with other
TTY users.
Enable: allows you to communicate with other TTY users.
You can communicate with other TTY users by connecting
certain portable TTY terminal models to your phone using
an optional adapter.
Extra settings
This menu allows you to turn on the automatic redialing or
answering features of your phone.
To turn a feature
Press the
on
off
Mark soft key or the
mark displays in front of the option.
key. A check
Unmark soft key or the
key. The
check mark no longer displays.
The following options are available:
Auto redial: when checked your phone makes up to ten
attempts to redial a phone number after an unsuccessful
call.
Note: The interval between call attempts varies.
Active folder: when checked, you can simply open the
phone to answer a call. When it is unchecked, you must
open the phone and press a key to answer a call,
depending on the setting of the Anykey answer option
below.
Settings
134
Anykey answer: when checked, you can answer an
incoming call by pressing any key, except the
key or
the Reject soft key because these keys are used to reject
a call.
When this option is unchecked, you must press the
key or Accept soft key to answer a call.
Display settings
The Display settings menu (Menu 9.3) allows you to
change various settings for the display or backlight.
Interior display
This menu allows you to change the background image or
the color of the text displayed in Idle mode.
The following options are available:
Wallpaper you can select a background image to be
displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or Down key.
Note: You have various preset images available. You can also select any
images downloaded for the Internet, WAP browser and optional
EasyGPRS program or received in messages.
2. Press the Select soft key or the
key when the
image you want is highlighted.
3. When the image displays, press the Select soft key or
the key to display it on the idle screen.
Text color: you can select the color of the text to be
displayed on the idle screen.
Settings
135
Exterior display
This menu allows you to change the color of your external
display to meet your preference.
Menu style
This menu allows you to select the menu display style.
You can choose either Grid style, Bar style, or Page style.
Back light
You can select the length of time that the backlight stays
on. The backlight turns on when you press a key or
receive a call or message and remains on for the specified
length of time.
Service light
This menu allows you to select whether or not the service
light is used. It also allows you to select the color used
when the Service Light flashes.
Select one from the seven color combinations. When the
phone is ready for use, the service light flashes in the
chosen color.
If you do not want to use the service light, select Off.
Graphic logo
This menu allows you to display your service provider’s
logo instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo displays in Idle mode. If no
logo is stored, the service provider’s name displays.
Settings
136
Sound settings
The Sound settings menu (Menu 9.4) allows you to
customize various sound settings.
Ring tone
This menu allows you to select a ring melody. You can
choose between many different melodies, or if you have
downloaded sounds from the Internet, you can access
them with this menu.
Ring volume
This menu allows you to adjust the ring volume to one of
five levels. Use the Up and Down keys or the Volume keys
on the left side of the phone to increase or decrease the
volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls. The following options are
available:
Light only: the service light flashes but the phone doesn’t
ring or vibrate.
Melody: the phone rings using the ring melody selected in
the Ring tone menu.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then starts ringing.
Settings
137
Keypad tone
This menu allows you to select the tone your phone
sounds when you press a key. To turn the sound off for
your keypad, select Off.
Message tone
This menu allows you to select how your phone informs
you that a new message has been received.
Text message
The following options are available for alerting you to new
text messages:
Off: the phone does not use an SMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS tone x: the phone uses one of several SMS tones.
Picture message
The following options are available for alerting you to new
multimedia messages:
Off: the phone does not use an MMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS tone x: the phone uses one of several MMS tones.
Settings
138
Folder tone
This menu allows you to select the tone that sounds when
you open or close your phone. To turn off the sound,
select Off.
Power on/off tone
This menu allows you to select the melody that the phone
sounds when it is switched on and off. To turn off the
sound, select Off.
Alerts on call
This menu allows you to choose if your phone informs you
when you receive a new message or when an alarm
occurs during a call.
The following options are available:
Off: the phone doesn’t actively alert you to incoming
messages or alarms. Your phone displays the
corresponding notification for an alarm.
On: the phone alerts you with a beep and displays the
corresponding notification.
Settings
139
Extra tones
You can customize additional tones for the phone.
To turn a given tone
Press the
on
On soft key or the
key. A check
mark displays in front of the option.
off
Off soft key or the
key. The
check mark no longer displays.
The following options are available:
Error tone: sets the phone to inform you when you have
made a mistake.
Minute minder: sets the phone to beep every minute
during an outgoing call to keep you informed of the length
of your call.
Connect tone: sets the phone to beep when your call is
connected to the system.
Security
The Security menu (Menu 9.5) allows you to restrict the
use of your phone by the others or to restrict the types of
calls. Various codes and passwords are used to protect
more information.
PIN check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone, so any
Settings
140
person who does not have your PIN cannot use your
phone.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled. You must
enter the current PIN before you can specify a new one.
After entering a new PIN, you are asked to confirm it by
entering it again.
Phone lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4 to 8-digit phone password
each time the phone is switched on.
Note: The password is preset to “00000000” at the factory. To change the
phone password, see the Change Password menu.
Once the correct password is entered, you can use the
phone until you switch it off.
The following options are available:
Enable: you are required to enter the phone password
when you turn your phone on.
Disable: you are not asked to enter the phone password
when you turn your phone on.
Settings
141
Change password
The Change Password feature allows you to change your
current phone password. You must enter the current
password before you can specify a new one.
Note: The password is preset to “00000000” at the factory.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
The Privacy menu allows you to lock your media content,
such as picture messages, voice messages, photos,
videos, voice memos, images, and sounds. Once you
have locked the contents, you must enter the phone’s
password to access the associated menus.
To
Press the
select an item to lock
Up or Down key to highlight the
item you want
lock all of the contents
Up or Down key to highlight All
and press the
key.
place or remove a check
mark
key.
lock the marked items
OK soft key.
When the phone asks for the password, enter the
password and press the OK soft key or the
key.
Settings
142
FDN mode
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in Phone
book. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Reset settings
The Reset settings menu (Menu 9.6) allows you to easily
reset your phone to its default settings. To reset your
phone, enter your password and press the OK soft key or
the
key.
Settings
143
Settings
144
Solving problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of
an unnecessary service call.
When you switch your phone on, the following messages
display
Insert SIM Card
● Check that the SIM card is correctly installed.
Phone Locked Enter Password
● The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
Enter PIN
● You are using your phone for the first time. You must
enter the Personal Identification Number supplied with
the SIM card.
● The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu.
Enter PUK
● The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your service provider.
“ No Service,” “ Network Failure” or “ Not Done” displays
● The network connection was lost. You may be in a
weak signal area. Move and try again.
Solving problems
145
● You are trying to access an option for which you have
not taken out a subscription with your service provider.
Contact the service provider for more details.
You have entered a number but it was not dialed
● Have you pressed the
key?
● Are you accessing the right cellular network?
Your correspondent cannot reach you
● Is your phone switched on (the
key pressed for
more than one second)?
● Are you accessing the right cellular network?
Your correspondent cannot hear you speaking
● Have you switched off the microphone?
● Are you holding the phone close enough to your
mouth? The microphone is located at the bottom of the
phone.
The phone starts beeping and “ **Warning** Low Battery”
flashes on the display
● The battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
● Check the signal strength indicator on the display
(
); the number of bars indicates the signal strength
from strong (
) to weak (
).
● Try moving the phone slightly or moving closer to a
window if you are in a building.
Solving problems
146
No number is dialed when you recall a Phone book entry
● Check that the number has been stored correctly, by
using the Phonebook Search feature.
● Re-store the number, if necessary.
If the above guidelines do not help you to solve the
problem, take a note of:
•
•
•
the model and serial numbers of your phone
your warranty details
a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
Solving problems
147
Solving problems
148
Access codes
There are several access codes used by your phone and
its SIM card. These codes help you protect the phone
against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key or the
key. If you make a
mistake, press the key until the incorrect digit is
cleared and then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes
can be changed using the Security menu (Menu 9.5). See
page 140 for more details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, to prevent
accidental dialing of an emergency number.
Phone password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the Phone
Lock feature
change the phone password
Access codes
149
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it
by entering the PUK. See below.
To
See
activate/deactivate the PIN
Check feature
change the PIN
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied with the
SIM card. If not, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key or the
key.
2. Enter a PIN of your choice and press the OK soft key or
the
key.
3. When the Confirm New PIN message displays, enter
the same code again and press the OK soft key or the
key.
When you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
Access codes
150
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft
key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key.
When you enter an incorrect PUK2 ten times in
succession, you are not able to access the functions
requiring the PIN2. Contact your service provider for a
new card.
Access codes
151
Access codes
152
Important safety precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service station)
or near fuels or chemicals.
Switching off in an aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
Switching off in hospitals
Switch off your phone near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which
could affect their performance.
Special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger (in a
hospital for example).
Important safety precautions
153
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is
switched on.
Emergency call
Ensure the phone is switched on and in service. Key in the
emergency number for your current location, then press
the
key. You must deactivate any unnecessary
features in use before you can make an emergency call.
Give all necessary information as accurately as possible.
Do not cut off the call until given permission to do so.
Water resistance
Your phone is not water-resistant. Keep it dry.
Accessories and batteries
Use only Samsung-approved accessories and batteries.
Use of any unauthorized accessories could damage your
phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your phone.
For more detailed safety information, see “Health and
Important safety precautions
154
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate
(SAR). The SAR limit recommended by the FCC is
1.6W/kg.*
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands.
*. In the U.S. and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) aver-
aged over one gram of tissue. The standard incorpo-
rates a substantial margin of safety to give additional
protection for the public and to account for any varia-
tions in measurements.
Health and Safety Information
155
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless
base station antenna, the lower the power output of the
phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
FCC certification information for this model phone is
attached separation paper.
Health and Safety Information
156
For Body Operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with and
accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance for this model phone is written in
the FCC certification information from the body. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions When Using Batteries
● Never use any charger or battery that is damaged in
any way.
● Use the battery only for its intended purpose.
● If you use the phone near the network’s base station, it
uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
● Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The
Health and Safety Information
157
battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation
time (talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
● If left unused, a fully charged battery will discharge
itself over time.
● Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
● Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming first.
● Do not leave the battery in hot or cold places, such as
in a car in summer or winter conditions, as you will
reduce the capacity and lifetime of the battery. Always
try to keep the battery at room temperature. A phone
with a hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 °C
(32 °F).
● Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or
pen) causes a direct connection between the + and –
terminals of the battery (metal strips on the battery), for
example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
● Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of batteries
in a fire.
Health and Safety Information
158
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features
help you to place your call without taking your attention
off the road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, let your voice mail answer it for
you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
Health and Safety Information
159
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make the people with whom
you are talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are in
danger, call the emergency number, as you would want
others to do for you.
10.If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know to
be stolen, call roadside assistance or any other special
non-emergency wireless number.
Health and Safety Information
160
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
Health and Safety Information
161
● should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on.
● should not carry the phone in a breast pocket.
● should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care facilities
when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
Health and Safety Information
162
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Health and Safety Information
163
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Health and Safety Information
164
Other Important Safety Information
● Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
● Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
● Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
● For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air bag
deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could
result.
● Switch your phone off before boarding an aircraft. The
use of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
● Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
● Keep the phone and all its parts and accessories out of
the reach of small children’s.
● Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
Health and Safety Information
165
● Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the phone.
● Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
● Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
● Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature, moisture
can form inside the phone, which may damage the
phone’s electronic circuit boards.
● Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
● Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
● Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
● Do not put the phone in or on heating devices, such as
a microwave oven, a stove or a radiator. The phone
may explode when overheated.
● Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
● If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Health and Safety Information
166
Acknowledging Special Precautions and FCC and
Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
Health and Safety Information
167
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.
● Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/ TV
technician for help.
Health and Safety Information
168
Appendix A: Certification Information
(SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
safety standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is
1.6 W/kg. SAR Tests are conducted using standard
operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Appendix A: Certification Information (SAR)
169
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values for this model phone as reported
to the FCC are Head: 1.37W/Kg, Body-worn: 0.689W/Kg.
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHE315.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
AppendixA:CertificationInformation(SAR)
170
Appendix B: Guide to Safe and
Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION
OF CONVENIENCE, SAFETY AND VALUE DELIVERED
BY THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH
YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle-whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers. It requires
Appendix B: Guide to Safe and Responsible Wireless Phone Use
171
obeying all traffic signs and signals and staying within the
speed limit.
It means using seat belts and requiring other passengers
to do the same.
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is
keeping us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable
features most phones offer, including automatic redial
and memory. Also, work to memorize the phone
keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
172
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail
answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to do” list while driving a car, you are
not watching where you are going. It’s common sense.
Don’t get caught in a dangerous situation because you
are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
or attempt to coincide your calls with times you may be
stopped at a stop sign, red light or otherwise stationary.
But if you need to dial while driving, follow this simple
tip-dial only a few numbers, check the road and your
mirrors, then continue.
Appendix B: Guide to Safe and Responsible Wireless Phone Use
173
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations-with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as
you would want others to do for you.
10.Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
174
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE. For
updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID=85
Appendix B: Guide to Safe and Responsible Wireless Phone Use
175
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
176
Appendix C: Consumer Update on
Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can
Appendix C: Consumer Update on Wireless Phones
177
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
AppendixC:ConsumerUpdateonWirelessPhones
178
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
Appendix C: Consumer Update on Wireless Phones
179
4. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
5. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
AppendixC:ConsumerUpdateonWirelessPhones
180
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected
to a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the
RF exposure from these products, you can use measures
like those described above to reduce your RF exposure
from wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Appendix C: Consumer Update on Wireless Phones
181
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
7. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against
the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless
phones marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
8. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
AppendixC:ConsumerUpdateonWirelessPhones
182
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
9. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
Appendix C: Consumer Update on Wireless Phones
183
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when
a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
10.What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer
in laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
AppendixC:ConsumerUpdateonWirelessPhones
184
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However,
none of the studies can answer questions about long-term
exposures, since the average period of phone use in
these studies was around three years.
11.What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
Appendix C: Consumer Update on Wireless Phones
185
12.Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
AppendixC:ConsumerUpdateonWirelessPhones
186
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants to the original purchaser (“Purchaser”) that
SAMSUNG’s Phones and accessories (“Products”) are
free from defects in material and workmanship under
normal use and service for the period commencing upon
the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not furnished
or approved by SAMSUNG; (e) defects or damage from
Standard Limited Warranty
187
improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on
the battery are broken or show evidence of tampering, or
(iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG’s sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in an
adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers’ name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG’s sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/replaced
leather cases, pouches and holsters will be warranted for
a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the
Standard Limited Warranty
188
remainder of the original Limited Warranty on the original
Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become
the property of SAMSUNG. If SAMSUNG determines that
any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges
for the repair or return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE
NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
● THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR
USE;
● WARRANTIES OF TITLE OR NON-INFRINGEMENT;
● DESIGN, CONDITION, QUALITY, OR
PERFORMANCE OF THE PRODUCT;
● THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
● COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
Standard Limited Warranty
189
WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE
THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME
AS THE EXPRESS WRITTEN WARRANTY STATED
HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE/PROVINCE TO
Standard Limited Warranty
190
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER
MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-
PARTY SOFTWARE OR EQUIPMENT, WHETHER
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY
TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
Standard Limited Warranty
191
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional statements
such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2004 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
Standard Limited Warranty
192
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage
of the features of your mobile phone, here are a few
definitions:
Active Folder
Ability to answer a call simply by opening the phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or making
another call; you can then switch between the two calls, as
required.
Call Waiting
Informs you that you have an incoming call when you are
engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the telephone
numbers of callers.
Dual Band
Ability to operate with both PCS (1900 Mhz) and GSM (900 Mhz)
networks. The phone automatically uses the network with the
strongest signal and even switches networks during a call within
the same operator’s network.
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS) that allows
you to send and receive ring tones and service provider’s logo,
as well as combinations of simple media to and from EMS-
Glossary
193
compliant handsets. Because EMS is based on SMS, it can use
SMS centers the same way that SMS does. EMS works on all
Global System for Mobile communications (GSM) networks.
EMS senders can use text, melodies, pictures, sounds, and
animations to enhance the expressive power of messages that
are limited by the display constraints of mobile devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows information to be
sent and received across a mobile telephone network. GPRS
provides continuous connection to the Internet for mobile phone
and computer users. It is based on the Global System for Mobile
Communication (GSM) circuit-switched cellular phone
connections and the Short Message Service (SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication, guaranteeing
compatibility between the various network operators. GSM
covers most European countries and many other parts of the
world.
Java
Programming language generating applications that can run on
all hardware platforms, whether small, medium or large, without
modification. It has been promoted for and geared heavily to the
Web, both for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java applet. When
it is run on a mobile phone or pager, it is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment, standardized by
the WAP Forum and the 3rd Generation Partnership Program
(3GPP). For phone users, MMS is similar to Short Message
Service (SMS)-it provides automatic, immediate delivery of user-
created content from phone to phone. The message addressing
Glossary
194
used is primarily phone numbers, thus the traffic goes from
phone to phone. MMS also provides support for e-mail
addressing, so that messages can be sent by e-mail. In addition
to the text content of SMS, MMS messages can contain still
images, voice or audio clips, and also video clips and
presentation information.
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone against unauthorized use.
The PIN is supplied by the service provider with the SIM card. It
may be a four to eight-digit number and can be changed, as
required.
Proxy Server
A proxy server resides between a Web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
browser is not actually connecting to the web server. The request
from their browser goes to a proxy server, and the proxy server
makes the request to the web server. A proxy server can
improve performance for groups of users because it cache the
results of all requests for a certain amount of time. If a user
requests a web page that it already loaded for another user, it
reloads the page instead of forwarding the request to the Web
server, which can be a time-consuming operation.
Glossary
195
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect PIN
has been entered three times in succession. The eight-digit
number is supplied by the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home area (when
traveling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as well as
the subscriber’s personal data). The SIM card fits into a small
slot on the back of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the correspondent.
The message created or received can be displayed, received,
edited or sent.
Soft Keys
Two keys marked soft keys
and
on the phone, the
purpose of which varies according to the function that you are
currently using.
Synchronization
It is possible to coordinate the contents of specific files identical
on different devices. For example, a user can synchronize the
phonebook or contacts, calendar, and to-do list on a mobile
device with corresponding PC applications.
Voice Mail
Computerized answering service that automatically answers
your calls when you are not available, plays a greeting (optionally
in your own voice) and records a message.
Glossary
196
Display
Inbox, messages
J
E
EMS (Enhanced Message
K
Keypad tones
Keys
F
location •
Forwarding
L
Locking
G
Games
M
Memory status
H
Menus
I
Images
Index
198
Messages
P
Password
Phone
layout •
MMS (Multimedia Message
Multimedia messages
unpacking •
Phonebook
Muting
Photo
N
Names
PIN
PIN2
Numbers, phone
O
Outbox, messages
Index
199
R
T
Received messages
Tasks, to do list
Templates, message
Text message
Recording
Redialing
Tone
S
Safety
Sent messages
SIM card
SMS (Short Message Service)
Sounds
V
Video
Voice memo
Voice messages
Switching on/off
Index
200
Index
202
203
204
|