* Some of the contents in this manual may differ from your phone
depending on the software of the phone or your service provider.
DUAL BAND
GSM TELEPHONE
SGH-A300
ELECTRONICS
Printed in Korea
Code No.: GH68-01988A
World Wide Web
English. 08/2001. Rev. 2.1
In-Call Options ............................................................... 48
Putting a Call on Hold........................................................ 48
Switching the Microphone Off (Mute)............................... 49
Muting/Sending Key Tones................................................ 50
Searching for a Number in the Phonebook....................... 51
Using the SMS Service ..................................................... 52
Answering a Second Call.................................................. 52
Making a Multiparty Call ................................................... 53
Sound Settings (continued)
Error Tone (Menu 3.7)........................................................ 76
Minute Minder (Menu 3.8)................................................. 77
Connect Tone (Menu 3.9)................................................... 77
Phone Settings ............................................................... 78
Infrared Activate (Menu 4.1) ............................................. 78
Greeting Message (Menu 4.2)........................................... 79
Own Number (Menu 4.3) ................................................... 79
Language (Menu 4.4)......................................................... 80
Light (Menu 4.5)................................................................. 80
Auto Redial (Menu 4.6)...................................................... 81
Active Flip (Menu 4.7)........................................................ 81
Anykey Answer (Menu 4.8) ............................................... 82
Contrast (Menu 4.9)........................................................... 82
Reset Settings (Menu 4.10)................................................ 82
Using the Menus............................................................ 55
Using the Navigation Keys ................................................ 55
Using the Index System..................................................... 56
Menu Map......................................................................... 57
Call Records................................................................ 62
Missed Calls (Menu 1.1).................................................... 62
Received Calls (Menu 1.2)................................................. 62
Dialled Calls (Menu 1.3)..................................................... 63
Call Time (Menu 1.4).......................................................... 63
Call Cost (Menu 1.5) .......................................................... 64
Organiser......................................................................... 83
Calendar (Menu 5.1) .......................................................... 83
To Do List (Menu 5.2)......................................................... 85
Time & Date (Menu 5.3)..................................................... 87
Alarm (Menu 5.4)............................................................... 89
Calculator (Menu 5.5) ........................................................ 90
ShortCut (Menu 5.6)........................................................... 91
Messages........................................................................ 65
Read Messages (Menu 2.1)............................................... 65
Write Messages (Menu 2.2) .............................................. 67
Preset Message (Menu 2.3) .............................................. 67
Setup (Menu 2.4) ............................................................... 68
Broadcast (Menu 2.5)........................................................ 69
Voice Mail (Menu 2.6)........................................................ 71
Security ........................................................................... 92
PIN Check (Menu 6.1)........................................................ 92
Change PIN (Menu 6.2) ..................................................... 93
Phone Lock (Menu 6.3)...................................................... 93
Change Password (Menu 6.4) ........................................... 94
SIM Lock (Menu 6.5) ......................................................... 94
FDN Mode (Menu 6.6) ....................................................... 95
Change PIN2 (Menu 6.7).................................................... 95
Sound Settings ............................................................... 72
Ring Tone (Menu 3.1)......................................................... 72
Melody Composer (Menu 3.2) ........................................... 72
Ring Volume (Menu 3.3)..................................................... 74
Alert Type (Menu 3.4) ........................................................ 75
Keypad Tone (Menu 3.5).................................................... 75
Message Tone (Menu 3.6)................................................. 76
4
5
Important Safety Precautions
Network Services ......................................................... 96
Call Diverting (Menu 7.1) ................................................... 96
Call Barring (Menu 7.2)...................................................... 98
Call Waiting (Menu 7.3) ..................................................... 100
Network Selection (Menu 7.4)........................................... 101
Caller ID (Menu 7.5)........................................................... 102
Closed User Group (CUG) (Menu 7.6)................................ 103
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see Safety
Information on page 111.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
WAP Browser................................................................. 105
Solving Problems .......................................................... 106
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Using the Batteries ....................................................... 109
Precautions When Using Batteries ................................... 109
Safety Information......................................................... 111
Road Safety ....................................................................... 111
Operating Environment...................................................... 111
Care and Maintenance...................................................... 113
Emergency Calls................................................................ 114
Switch off in aircraft
Mobile phones can cause interference. Using them on
aircraft is both illegal and dangerous.
Respect special regulations
Glossary of Terms.......................................................... 115
Index ................................................................................ 119
Quick Reference Card .................................................. 123
Follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger (in a
hospital for example).
Interference
All mobile phones may be subject to radio interference,
which may affect their performance.
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
6
7
Important Safety Precautions
Unpacking
Your package contains the following items.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when the
phone is switched on.
Travel Adapter
Handset
Emergency calls
Ensure that the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press the
key. Give your
location. Do not end the call until given permission to do
so. End the call by closing the flip cover or pressing the
key.
Battery
Hand Strap
Earphone
IMPORTANT! Use only SAMSUNG-approved
accessories.
The use of any other power accessory may invalidate
any approval or warranty applying to the phone, and
could be dangerous.
User’s Manuals
When you disconnect the power cord of any accessory,
grasp and pull the connector, not the cord.
In addition, you can obtain the following accessories for
your phone from your local SAMSUNG dealer:
• Travel adapter
• Simple hands-free kit
• Standard and slim batteries
• Cigarette lighter adapter
• Earphone
• Car holder
9
8
Your Phone
Your Phone
Phone Layout
Key
Description
Perform the functions indicated by the text
above them (in the bottom line of the display).
The following illustrations show the main elements of
your phone.
(soft keys)
In the menu facility, scrolls through the menu
options and phonebook memory.
Earpiece
Display
When pressed in idle mode, the
launches the WAP Browser. The
accesses your favourite menu options directly
(for more information on shortcuts, see
page 91).
key
key
Navigation
In the menu facility, return to the previous
menu level and select the current menu
respectively.
keys/WAP
Service light
Browser key
Soft key (right)
Soft key (left)
When entering a name, move the cursor left
and right respectively.
Volume/menu
browse keys
Cancel/
correction key
When pressed in idle mode, accesses your
favourite menu options directly (for more
information on shortcuts, see page 91).
Dial/menu
confirmation key
Power on/off key/
menu exit key
Alphanumeric
keys
Infrared port
Deletes characters from the display.
Microphone
Special function
keys
In the menu facility, returns to the previous
menu level.
Antenna
When held down for more than two seconds
in idle mode, accesses one of your favourite
menu options directly (for more information
on shortcuts, see page 91).
Earphone jack
External display
10
11
Your Phone
Your Phone
Display
Key
Description (continued)
Display Layout
Makes or answers a call.
The display comprises three areas.
In idle mode, recalls the last number dialled.
Icons
Text and
In the menu facility, selects a menu function or
stores information that you have entered (such
as a name) in the phone or SIM memory.
graphic area
Ends a call. Also switches the phone on and
off when pressed and held.
Soft key indications
Menu
Name
In the menu facility, returns to the idle mode
and cancels your input.
Area
Description
When held down in idle mode, accesses your
voice mailbox.
First line
Displays various icons (see below).
Middle lines Display messages, instructions and
any information that you enter (number
to be dialled, for example).
Enter numbers, letters and some special
characters.
Last line
Shows the functions currently assigned
to the two soft keys.
Enter special characters.
Icons
(on the side of the phone)
During a call, adjust the earpiece volume.
In idle mode with the flip cover open, adjust
the key volume.
Icon Description
Shows the received signal strength. The
greater the number of bars, the better the signal
strength.
In the menu facility, scroll through the menu
options and phonebook memory.
Appears when a call is in progress.
12
13
Your Phone
Your Phone
Icon Description (continued)
To specify the length of time for which the backlight is
active, set the Back Light menu option (4.5.1); see
page 80 for further details.
Appears when a new text message has been
received.
External Display
Appears when the Vibrate mode is active.
Appears when you set the alarm.
Your phone has an external display on the cover. It
indicates that you have an incoming call or a message,
and notifies you at the specified time when you have set
an alarm.
Shows the level of your battery. The more bars
you see, the more power you have left.
When you press and hold down the volume keys on the
left side of the phone with the phone closed, the
backlight of the external display illuminates.
Indicates that you have activated the Infrared
feature to communicate with an IrDA-compliant
device and send or receive data or a fax (for
further details, see page 78).
Service Light
Appears when you are out of your home area
and have registered with a different network
(when travelling in other countries, for
example).
The service light is in the top right-hand corner of the
phone. It flashes when services are available on the
phone.
Appears when a new voice mail message has
been received.
To activate or deactivate use of the service light, set the
Service Light menu option (4.5.2); see page 80 for
further details.
Appears when you activate the Mute mode.
Backlight
The display is illuminated by a backlight. When you
press any key, the backlight illuminates. It turns off if no
key is pressed within a given period of time, depending
on the Back Light option in the Phone Settings menu.
Service light
14
15
Getting Started
Getting Started
Your First Call
Installing the SIM Card
The following diagram explains the main steps required
when making your first call and indicates the pages on
which you can find more detailed instructions.
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details (PIN, optional services available and
so on).
Important! The plug-in SIM card and its contacts can
be easily damaged by scratches or bending,
so be careful when handling, inserting or
removing the card.
Insert the SIM card
(phone switched off and
Page 17
battery removed)
Keep all SIM cards out of the reach of small
children.
Charge the phone
Page 19
battery
1. If necessary, switch off the phone by holding down
the
key until the SAMSUNG message is
displayed.
Page 21
Page 21
Switch the phone on
Enter your PIN
2. Remove the battery. To do so:
➀ Push down and hold the catch above the battery
on the back of the phone.
➀ Slide the battery away, as shown.
➀
Dial the phone
number required
Page 26
Page 27
➀
When you have
finished, end the call
16
17
Getting Started
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
A travel adapter is provided with your phone. Use only
approved batteries and chargers. Ask your local
SAMSUNG dealer for further details.
3. Slide the SIM card into the SIM card holder so that
the holder locks the card in position.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
Note: When you need to remove the SIM card, slide
it towards the top of the phone and take it out
of the holder.
1. With the battery in position on the phone, connect
the lead from the travel adapter to the bottom of the
phone. Check that the arrow on the lead connector is
facing towards the front of the phone.
4. Place the battery back on the phone. Slide the
battery up towards the catch until it clicks into place.
Make sure that the battery is properly installed
before switching on the power.
2. Connect the adapter to a standard AC wall outlet.
18
19
Getting Started
Getting Started
Switching the Phone On/ Off
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the connector
and pulling the connector out.
1. Open the flip cover.
2. Hold down the
key for more than one second
to switch the phone on.
3. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 00000000. For further
details, see page 22.
4. If the phone asks for a PIN, key in the PIN and press
the OK soft key. For further details, see page 23.
Low Battery Indicator
The phone searches for your network and when
it finds it, the idle screen, illustrated below, is
displayed. The external display shows the signal
strength, battery strength and current time and date.
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
<SERVICE PROVIDER>
1 2 : 5 7
Sat 14 Mar
**Warning**
1 2 : 5 7
S a t / 1 4
Low Battery
Menu
Name
Menu
Name
Main display
External display
Note: The display language is factory set to English. To
change the language, use the Language menu
option (4.4); for further details, refer to page 80.
When the battery becomes too weak for the phone to
operate, it switches off automatically.
5. When you wish to switch the phone off, hold down
the
key for more than two seconds.
20
21
Getting Started
Getting Started
Access Codes
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorised use. It is
usually supplied with the SIM card.
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
If you enter an incorrect PIN three times in succession,
the code is disabled and cannot be used until you
re-enable it by entering the PUK (see below).
When requested for any of the codes explained below,
key in the appropriate code (displayed as asterisks) and
press the OK soft key. If you make a mistake, press the
C key one or more times until the incorrect digit is
cleared and then continue entering the correct code.
To...
Refer to page...
Activate/deactivate
92 (menu option 6.1).
The access codes (except for the PUK and PUK2 codes)
can be changed using Security menu options. See
page 92 for further details.
the PIN Check feature
Change the PIN
93 (menu option 6.2).
Important! Avoid using access codes resembling
emergency numbers, such as 112, so that
you do not dial an emergency number
accidentally.
PUK
The 8-digit PUK (Personal Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied with
the SIM card. If not, or you have lost it, contact your
service provider.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The phone
password is supplied with the phone and is factory set
to 00000000.
To re-enable your PIN, proceed as follows.
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft
key.
To...
Refer to page...
3. When the Confirm New PIN message is displayed,
Activate/deactivate
the Phone Lock feature
93 (menu option 6.3).
key in the same code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
Change the phone password 94 (menu option 6.4).
22
23
Getting Started
Getting Started
PIN2
Barring Password
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password from
your service provider when you subscribe to this function.
See page 98 for further details.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the
functions until you re-enable it by entering the PUK2.
To change the PIN2, refer to page 95 (menu option 6.7).
PUK2
The 8-digit PUK2 (Personal Unblocking Key 2), supplied
with some SIM cards, is required to change a disabled
PIN2. If you lose the code, contact your service provider.
To re-enable your PIN2, proceed as follows.
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message is displayed, key
in the same code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession,
you will not be able to access the functions requiring
the PIN2. Contact your service provider for a new card.
24
25
General Functions
General Functions
Ending a Call
Making a Call
When you have finished your call, briefly press the
key.
When the idle screen is displayed, key in the area code
and phone number and press the key.
Making a Call from the Phonebook
Note: If you have set the Auto Redial menu option (4.6) to
ON (see page 81) and the person called does not
answer or is already on the phone, the number is
redialled automatically up to ten times.
You can store the names and phone numbers dialled
regularly in the SIM card and phone memory, called the
phonebook. You then simply select the required name to
recall the associated number. For further details on the
Phonebook feature, refer to page 36.
Making International Calls
Redialling the Last Number
1. Press and hold down the 0 key.
The phone stores the last 10 numbers dialled. To recall
any of these numbers, proceed as follows.
The + character appears.
2. Key in the country code, area code and phone number
1. If you have typed any characters on the display, clear
the display by holding down the C key for more than
one second.
and press the
key.
Correcting the Number
2. Press the
dialled.
key to display a list of the last numbers
To clear...
Then...
3. Use the
and keys to scroll through the
The last digit
displayed
Press the C key.
numbers until the required number is highlighted.
4. To...
Then...
Any other digit
in the number
Press the or key until the
cursor is immediately to the right of
the digit to be cleared. Press the C
key. You can also insert a missing
digit simply by pressing the
appropriate key.
Dial the number Press the
highlighted
key.
Edit the number • Press the Edit soft key.
highlighted
• Change the number as
required, referring to Correcting
the Number on page 26 for
further details.
The whole display Hold down the C key for more than
one second.
26
27
General Functions
General Functions
Adjusting the Volume
Answering a Call
During a call, if you want to adjust the earpiece volume,
use the and keys on the left side of the phone.
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
Press the key to increase and the key to decrease
the volume.
nnnn
( ( ) )
Caller’s name or
number (if available)
If the caller can be identified, the caller’s phone number
(or name if stored in your phonebook) is displayed. If the
caller cannot be identified, only the phone icon flashes.
1. If necessary, open the flip. Press the
key or the
Accept soft key to answer the incoming call.
If the Anykey Answer menu option (4.8) is set to
ON, you can press any key to answer a call except
In idle mode with the flip cover open, you can adjust the
key volume using the and keys.
for the
key and the Reject soft key (see
page 82).
Notes:
• To reject an incoming call, press and hold the
volume keys on the left side of the phone without
opening the flip.
• If the Active Flip menu option (4.7) is set to Enable,
you do not need to press any key. You can answer
the call simply by opening the flip (see page 81).
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the
phonebook or menu features.
28
29
General Functions
General Functions
Editing a Missed Call Number
Viewing Missed Calls
Note: If the number corresponding to the missed call is
not available, the Edit Number option is not
displayed.
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the person
back, if necessary.
1. Press the Options soft key.
2. If necessary, press the
or
key to highlight
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
the Edit Number option.
3. Press the Select soft key.
To view the missed call immediately, proceed as follows.
1. If the phone is closed, open the flip cover.
2. Press the View soft key.
4. Change the number as required.
5. To... Then press the...
Call the number key.
The number corresponding to the most recent missed
call is displayed, if available.
Store the number
Save soft key and enter the
name and location required
(for further details, refer to
page 36).
3. To...
Then press the...
Scroll through the
and
keys.
missed calls
Deleting a Missed Call
Call the number displayed
key.
1. Press the Options soft key.
Edit or delete a missed
call number
Select soft key
(see opposite).
2. If necessary, press the
or
key to highlight
the Delete option.
3. Press the Select soft key.
You can press the
key at any time to exit the
Missed Call feature.
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1.1); for further details, see page 62.
30
31
Selecting Functions and Options
Selecting Functions
and Options
Your phone offers a set of functions that allow you to
customise your phone. These functions are arranged in
menus and sub-menus, accessed via the two soft keys
marked . Each menu and sub-menu allows you to
view and alter the settings of a particular function.
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Select the:
Then press the...
Select soft key or key.
The roles of the soft keys vary according to the current
context; the label on the bottom line of the display just
above each key indicates its current role.
• Function displayed
or
• Option highlighted
View the next function
or highlight the next
option in a list
key or key on the
left side of the phone.
Example:
Move back to the
previous function or
option in a list
key or key on the
left side of the phone.
Enter Name
l
Move back up one
level in the structure
key, soft key or
C key.
OK
Exit the structure
without changing
the settings
key.
In some functions, you may be asked for a password or
PIN. Enter the required code and press the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the option
that is not currently active, so that you can select
it directly.
Press the right soft key
to change the text input
mode.
Press the left soft
key to save the
name entered.
32
33
Selecting Functions and Options
Selecting Functions and Options
Example: Setting the Display Language
1. When the idle screen is displayed, press the Menu
4. Scroll through the sub-menus until you reach the
soft key to enter the menu facility.
Language sub-menu, by pressing the
and
keys.
<SERVICE PROVIDER>
1 2 : 5 7
Phone Settings
1 Infrared Activ..
2 Greeting Mess...
3 Own Number
4 Language
Sat 14 Mar
Menu
Name
5 Light
English
Shows the
current setting
Select
4.4
2. Scroll through the menus until you reach the Phone
Settings menu, by pressing the
and
keys.
5. To view the languages available, press the Select
soft key or the key.
The current setting is highlighted.
Messages
Sound
Settings
Language
Deutsch
Phone
Settings
English
Italiano
Français
Español
Current
language
Select
4
Select
4.4.2
3. To select the Phone Settings menu, press the
Select soft key or key.
6. Scroll through the list of languages until the appro-
priate one is highlighted, by pressing the
keys.
and
Phone Settings
1 Infrared Activ..
2 Greeting Mess...
3 Own Number
4 Language
5 Light
If the menu name is too
long for the display, it is
scrolled when highlighted.
7. Press the Select soft key or the key to confirm
your selection.
Select
4.1
8. Press the C or key twice to exit the menu structure.
34
35
Phonebook
Phonebook
You can store phone numbers and their corresponding
names in the memory of your SIM card. In addition, you
can store up to 99 numbers and names in the phone
memory. The SIM card and phone memories, although
physically separate, are used as if they were a single
entity, called the phonebook.
6. If you do not want to save the number and name in
the suggested location, press the C key to clear the
location number and enter your preferred location by
pressing the number keys.
7. Press OK to store the name and number.
8. Press
to return to the idle screen.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the number
in the phonebook.
Speed-Dialling by Memory Location
Once you have stored phone numbers in the phonebook,
you can dial them easily whenever you want.
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the C key. For further
details, refer to page 26.
To speed-dial a number, proceed as follows.
To speed-dial
Then...
number in locations...
2. When you are sure that it is correct, press the Save
soft key.
2 to 9
Press and hold down the
appropriate key.
3. Enter the corresponding name (the maximum length
depends on your SIM card). For information on how to
enter a name, see page 43.
10 and above
• Press the appropriate keys,
followed by the key. The
display shows the name,
phone number and location.
• To dial the number, press
the Dial soft key.
4. When you are satisfied, press the OK soft key.
The phone now displays the first free location in the
last memory used to save a number and name. If that
memory is full, the first free location in the other
memory is displayed.
Note: Memory location 1 is reserved for your Voice
Mail server number.
5. Press the right soft key to toggle between the phone
(To Phone) and card (To Card) memories.
36
37
Phonebook
Phonebook
Searching for and Dialling a Number in the
Phonebook
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you to
access the phonebook options, described in the
following paragraphs.
1. When the idle screen is displayed, press the Name
soft key. You are asked to enter a name.
2. Enter the start of the name that you wish to find and
Accessing the Options
press the Search soft key.
To access the various phonebook options, proceed as
follows.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Search
soft key directly.
1. Press the Options soft key. The first available option
is highlighted.
The phonebook entries are listed, starting with the
first entry matching your input. This entry is also
highlighted.
2. To...
Select the
Then press the...
Select soft key or key.
3. To...
Then press the...
highlighted option
View the
View soft key.
Highlight a
different option
or
key one or more
highlighted entry
times until the required option
is highlighted.
Select a
or
key one or more
different entry
times until the required entry is
highlighted.
Paste
This option allows you to paste the phonebook number
into the normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
Look for a name
starting with a
different letter
Key labelled with the required
letter.
4. Once you have found the required entry, press
the key to dial the number.
Use the C key to change the number as required (refer
to page 26 for further details). When you are ready to
dial, press the
key.
38
39
Phonebook
Phonebook
3. Select the Caller group option.
4. Select the group to be defined.
5. Set the appropriate options.
Edit
This option allows you to edit a number and name
stored in the phonebook.
Erase
The following options are available.
This option allows you to erase a number and name
stored in the phonebook. You are asked to confirm that
you wish to erase the name and number from the
phonebook by pressing the Yes soft key.
Call ring tone: allows you to select the ring tone to be
used when you receive a voice phone call from a person
in the group.
SMS tone: allows you to select the ring tone to be used
when you receive a text message from a person in the
group.
Copy
This option allows you to copy a phonebook number to
another location. Use this option to store a number
similar to one already in memory; once copied, edit the
number and store it in the phonebook.
Graphic: allows you to select the graphic icon to be
displayed when you receive a call from a person in the
group.
Caller Group
Group Name: allows you to assign a name to the
group; for further details on how to enter characters,
refer to page 43.
You can set the phone to ring in a specific way and
display a preselected graphic icon when a particular
person calls you. To do so, you must:
• Define your caller groups
Assigning numbers to a group
1. View the required number in the phonebook.
2. Press the Options soft key.
• Assign the numbers in the phonebook to the
appropriate group
Defining a caller group
3. Select the Caller Group option.
4. Select the required group.
You can define up to five caller groups.
1. In the idle mode, press the Name soft key.
To remove a number from a group, select the No Group
option.
2. Press the Options soft key.
40
41
Phonebook
Entering Text
Memory Status
You can check how many names and numbers are stored
in the phonebook (card and phone memories). Proceed
as follows.
When using your phone, you will often need to enter
text. For example, when storing a name in the
phonebook, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s keypad.
1. In the idle mode, press the Name soft key.
2. Press the Options soft key.
You are provided with the following text input modes.
3. Select the Memory Status option.
• T9 mode
4. Press Next to toggle between the card and phone
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
memories.
than one letter - when you press the
key once,
J, K or L may be displayed. The T9 mode automati-
cally compares your keystrokes with an internal
linguistic dictionary to determine the correct word,
thus requiring far fewer keystrokes than the
traditional upper/lower-case character modes.
SDN
You can view the list of Service Dialling Numbers (SDN)
assigned by your network provider. Such numbers
include the emergency, directory enquiries and voice
mail numbers.
• Upper/lower-case character modes
1. In the idle mode, press the Name soft key.
2. Press the Options soft key.
These modes allow you to enter letters by pressing
the key labelled with the required letter once, twice
or three times until the letter is displayed.
3. Select the SDN option.
• Number mode
This mode allows you to enter numbers.
4. Scroll through the numbers using the
keys.
and
5. To dial the number displayed, press the Dial soft key.
Note: This option is available only when your SIM card
supports Service Dialling Numbers (SDN).
42
43
Entering Text
Entering Text
Changing the Text Input Mode
1. When you are in the T9 predictive text input mode,
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator in
the display.
start entering a word by pressing keys
Press each key only once for one letter.
to
.
Example: to enter HELLO in the T9 mode, press
and
Text input mode
indicator
,
,
,
.
The word that you are typing appears in the display. It
may change with each key that you press.
Enter Name
I
2. Enter the whole word before editing or deleting and
keystrokes.
OK
3. If the word is correct, start entering the next word.
Otherwise, press
display alternate word choices for the keys that you
have pressed.
,
or
repeatedly to
To select...
Then press the
key until...
soft
Example: OF and ME both share the sequence
. The phone displays the most
,
A
Upper-case characters
Lower-case characters
is displayed. See page 46.
is displayed. See page 46.
a
1
commonly used choice first.
Numbers only
The T9 mode
is displayed. See page 47.
is displayed. See below.
4. Complete each word with a space by pressing the
key.
• To type words not found in the T9 mode, change the
text input mode to the upper/lower-case character
input mode.
Using the T9 Mode
The T9 predictive text input mode allows you to key in
any character using single keystrokes. This text input
mode is based on a built-in dictionary.
44
45
Entering Text
Entering Text
• To enter full stops, hyphens or apostrophes, press
. The T9 mode applies grammar rules to ensure
that the correct punctuation is used.
Refer to the table below for more information on the
characters available using the keys.
Example:
is used twice to display two
punctuation marks:
Characters in the Order Displayed
Key
Upper Case
Lower Case
1
2
3
4
5
6
7
8
9
0
.
1 ! ? & i ¿ §
. % @ £ $ ¥
a b c 2 à ä å æ Γ
d e f 3 è é Φ
§
Space
¤
L
E
T
‘
S
E
A
T
.
A B C 2 Ä Å Æ Ç Γ
D E F 3 É ∆ Φ
G H I 4 Θ Ψ
g h i 4 ì
Ψ
• To change the case in the T9 mode, use the
key.
J K L 5 Λ
j
k l 5 Λ
• You can move the cursor by using the and keys.
To delete letters, press the C key. Press and hold
down the C key to clear the display.
M N O 6 Ñ Ø Ö ö
P Q R S 7 Π Σ Ξ
T U V 8 Ü ü
m n o 6 ñ ø ò ö
p q r s 7 ß Σ Ξ
† u v 8 ù ü
WX Y Z 9 Ω
0 * # , ; ‘ “ =
w x y z 9 Ω
/
: - + ( ) < >
Using the Upper/ Lower-Case Character
Mode
• To insert a space, press the
key.
Use the
to
keys to enter your text.
• You can move the cursor by using the and keys.
To delete letters, press the C key. Press and hold
down the C key to clear the display.
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Using the Number Mode
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter twice
(or a different letter on the same key), just wait for
a few seconds for the cursor to move right
The Number mode enables you to enter numbers in a
text message (a telephone number for example). Press
the keys corresponding to the required digits before
manually switching back to the appropriate text entry
mode.
automatically, and then select the next letter.
46
47
In-Call Options
In-Call Options
Your phone provides a number of control functions that
you can use during a call.
To swap between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other party.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call in
progress if this service is supported by the network. Of
these two calls, one is active and the other is on hold
and you can swap between the calls.
When you have finished, end each call normally by
pressing the
key.
Switching the Microphone Off (Mute)
To place a call on hold, simply press the Hold soft key.
You can reactivate the call whenever you want, by
pressing the Unhold soft key.
You can temporarily switch your phone’s microphone off,
so that the other party cannot hear you.
Example: You wish to say something to another person
in the room but do not want the other party to
hear you.
To make a call while you have a call in progress, proceed
as follows.
1. Key in the phone number that you wish to dial or look
it up in the phonebook.
To switch the microphone off temporarily, proceed as
follows.
2. Press the
key to dial the second call.
1. Press the Options soft key.
The first call is automatically put on hold.
2. If necessary, press the
option.
key to highlight the Mute
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the Hold soft
3. Press the OK soft key.
key.
The other party can no longer hear you.
2. Make the second call in the normal way.
48
49
In-Call Options
In-Call Options
Searching for a Number in the Phonebook
To switch the microphone back on, proceed as follows.
You can search for a number in the phonebook during a
call.
1. Press the Options soft key.
1. Press the Options soft key.
2. If necessary, press the
key to highlight the
Unmute option.
2. Press the
option.
key to highlight the Phonebook
3. Press the OK soft key.
3. Press the OK soft key.
The other party can hear you again.
The phonebook entries are listed.
4. Enter the name that you wish to find.
Muting/ Sending Key Tones
If you enter the start of the name, all phonebook
entries are listed, starting with the first entry
matching your input. The entry is also highlighted.
These options allow you to turn the key tones off or on.
If the Mute keys option is selected, your phone does
not transmit the key tones. It allows you to press keys
without hearing annoying key tones during a call.
5. To view the highlighted entry, press the View soft
key.
Note: To communicate with answering machines or
computerised telephony systems, the Send keys
option must be selected.
For a more detailed description of the Phonebook
feature, refer to page 36.
50
51
In-Call Options
In-Call Options
Using the SMS Service
Making a Multiparty Call
If you receive an SMS (Short Message Service) message
during a call, the message icon ( ) flashes in the
display. The SMS Service option enables you to use
this feature.
A multiparty call is a network service that allows up to
six people to take part simultaneously in a multiparty or
conference call. For more information, contact your
service provider.
Read Messages: allows you to read the messages that
you have received.
Setting up the Multiparty Call
Write Messages: allows you to write a message.
1. Call the first participant in the normal way.
For further details on the SMS service, refer to page 65.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
Answering a Second Call
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
You can answer an incoming call while you have a call
in progress, if this service is supported by the network
and you have set the Call Waiting menu option (7.3) to
Activate (see page 100). You will be notified of an
incoming call by a call waiting tone.
4. To add a new person to the multiparty call, call the
person in the normal way, then press the Options
soft key and select the Join option.
You can add incoming callers by answering the call and
pressing Options, followed by Join. Repeat as
required.
To answer a call while you have a call in progress,
proceed as follows.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
Having a Private Conversation With One Participant
2. To switch between the two calls, press the Swap
1. Press the Options soft key and choose the Select
one option.
soft key.
To end a held call, press the Options soft key and
select the End Held Call option.
The list of call participants appears.
3. To end the current call, press the
key.
52
53
In-Call Options
Using the Menus
2. Highlight the required person, by pressing the
The phone offers a range of functions that allow you to
tailor the phone to your needs. These functions are
arranged in menus and sub-menus.
or
key, followed by the Select soft key or the
key.
The menus and sub-menus can be accessed by using the
navigation keys or by using the index system.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with each
other.
Using the Navigation Keys
4. To return to the multiparty call, press the Options
soft key and select Join.
The navigation keys are used as follows.
All the multiparty call participants can now hear each
other.
Key
Purpose
Moves to the next option on the same
level as the one displayed.
Dropping One Participant
Moves to the previous option on the same
level as the one displayed.
1. Press the Options soft key and choose the Select
one option.
The list of call participants appears.
Selects the option displayed.
2. Highlight the required person, by pressing the
Goes back to the previous menu level.
or
key, followed by the Select soft key or the
key.
You can also use the and keys on the left side
of the phone to move to the next or previous option on
the same level as the one displayed.
3. Select Remove.
The call is ended with that participant, but you can
continue to talk with the other participants.
Example: accessing the Language option.
4. End the multiparty call by closing the phone or
1. Press the Menu soft key.
pressing the
key
.
2. Scroll through the menus by using the
and
keys until Phone Settings is displayed, then
press the Select soft key or the key.
54
55
Using the Menus
Using the Menus
Menu Map
3. Scroll through the options by pressing the
and
The following illustration shows the menu structure
available and indicates the:
keys until Language is displayed, then press the
Select soft key or the key.
• Number assigned to each option
• Page on which you can find a description of each
feature
The languages available are displayed.
Note: If you use a SIM AT card that provides additional
services, the SIM AT menu (9) is displayed first
when you press the Menu soft key to enter the
menu facility. For further details, refer to your SIM
card documentation.
Using the Index System
Each menu option is assigned a hierarchical number. You
can use this number to access the corresponding option
directly. Simply press the Menu soft key and key in the
required number.
1. Call Records (see page 62)
1.1 Missed Calls
1.2 Received Calls
1.3 Dialled Calls
1.4 Call Time
Example: accessing the Language option.
1.4.1 Last Call Time
1.4.2 Total Sent
1.4.3 Total Received
1.4.4 Reset Timers
1.5 Call Cost *
1. Press the Menu soft key.
2. Enter 4.
3. Enter 4.
1.5.1 Last Call Cost
1.5.2 Total Cost
The languages available are displayed directly.
1.5.3 Max Cost
The numbers assigned to each option are indicated on
the following menu map.
1.5.4 Reset Counters
1.5.5 Set Max Cost
1.5.6 Price/Unit
2. Messages (see page 65)
2.1 Read Messages
2.1.1 Inbox
2.1.2 Outbox
2.2 Write Messages
2.3 Preset Message
* Shown only if supported by your SIM card.
56
57
Using the Menus
Using the Menus
2. Messages (continued)
4. Phone Settings (continued)
2.4 Setup
4.6 Auto Redial
4.7 Active Flip
4.8 Anykey Answer
4.9 Contrast
2.4.1 Setting 1 *
2.4.2 Setting 2 *
2.4.3 Setting 3 *
2.4.4 Common Setting
4.10 Reset Settings
2.5 Broadcast
2.5.1 Read
2.5.2 Receive
2.5.3 Channel List
2.5.3.1 Select
5. Organiser (see page 83)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Format
2.5.3.2 Add Channel
2.5.3.3 Delete
2.5.3.4 Edit
2.5.4 Language
2.6 Voice Mail
2.6.1 Connect to Voice Server
2.6.2 Voice Server
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Weekly Alarm
5.4.4 Remove Alarm
5.4.5 Autopower
5.5 Calculator
5.6 ShortCut
3. Sound Settings (see page 72)
3.1 Ring Tone
3.2 Melody Composer
3.3 Ring Volume
3.4 Alert Type
5.6.1 Key down
5.6.2 Key right
5.6.3 Key left
3.5 Keypad Tone
3.6 Message Tone
3.7 Error Tone
3.8 Minute Minder
3.9 Connect Tone
5.6.4 C long press
6. Security (see page 92)
4. Phone Settings (see page 78)
6.1 PIN Check
4.1 Infrared Activate
4.2 Greeting Message
4.3 Own Number
4.4 Language
6.2 Change PIN
6.3 Phone Lock
6.4 Change Password
6.5 SIM Lock
6.6 FDN Mode *
6.7 Change PIN2 *
4.5 Light
* Shown only if supported by your SIM card.
58
59
Using the Menus
Using the Menus
7. Network Services (see page 96)
8. WAP Browser (see page 105)
7.1 Call Diverting
7.1.1 Divert Always
7.1.2 Busy
The Wap Browser option allows you to access the
Internet. For further details on the WAP Browser,
refer to the WAP Browser guide supplied with the
phone.
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
7.2 Call Barring
7.2.1 All Outgoing
7.2.2 International
7.2.3 International Except to Home
7.2.4 All Incoming
7.2.5 Incoming While Abroad
7.2.6 Cancel All
7.2.7 Change Barring Password
7.3 Call Waiting
7.3.1 Voice Calls
7.3.2 Cancel All
7.4 Network Selection
7.4.1 Automatic
7.4.2 Manual
7.5 Caller ID
7.5.1 Default
7.5.2 Hide Number
7.5.3 Send Number
7.6 Closed User Group
7.6.1 Index List
7.6.2 Outside Access
7.6.3 Default Group
7.6.4 Deactivate *
* Shown only if the Closed User Group feature is activated.
60
61
Call Records
Call Records
Dialled Calls
Menu 1.3
Via this menu, you can view the phone calls:
• Missed
• Received
• Dialled
This option lets you view the last 10 numbers dialled.
You can also:
• Delete the number
• Edit the number and save it in the phonebook
• Redial the number
The number and name (if available) are displayed,
together with the date and time at which the call was
made or received.
Note: Your phone can keep up to ten numbers in each
Call Time
Menu 1.4
list.
This option lets you view the timers for calls made and
received. The following timers are available.
Missed Calls
Menu 1.1
Last Call Time: length of the last call.
This option lets you view the last 10 unanswered calls.
You can also:
• Edit the number if available and dial it or save it in
the phonebook
Total Sent: total length of all calls made since the timer
was last reset.
Total Received: total length of all calls received since
• Delete the call from the list
the timer was last reset.
Reset Timers: option used to reset the call timers; you
must first enter the phone password (see page 22) and
then press the OK soft key.
Received Calls
Menu 1.2
This option lets you view the last 10 phone calls
answered. You can also:
• Edit the number if available and dial it or save it in
the phonebook
Note: The actual time invoiced for calls by your service
provider may vary, depending on network
features, rounding-off for billing purposes and so
forth.
• Delete the call from the list
62
63
Call Records
Messages
*
Call Cost
Menu 1.5
The SMS (Short Message Service) function is a network
service and may not be supported by your network.
Messages can be sent by text, fax, Email and paging
messaging systems, provided that these services are
supported by your network. To send text messages by
phone, you must obtain the number of the SMS centre
from your service provider.
This network feature lets you view the cost of calls. The
following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
can no longer make any calls until you reset the counter.
When the
icon appears, you have received new text
messages. If the message memory is full, an error
message is displayed and you cannot receive any new
messages. Use the Delete option in the Read
Messages menu (2.1) to delete obsolete messages.
Max Cost: maximum cost set via the Set Max Cost
option (see below).
Reset Counters: option used to reset the cost counter;
you must first enter your PIN2 (see page 24) and then
press the OK soft key.
Read Messages
Menu 2.1
Set Max Cost: option used to enter the maximum cost
that you authorise for your calls.
Two message boxes are available.
Inbox: used to store the messages that you have
received.
Price/Unit: option used to set the cost of one unit; this
price per unit is applied when calculating the cost of
your calls.
Outbox: used to store the messages that you have
already sent or will send.
Select the required box. The list of messages in the box
is displayed.
* Shown only if supported by your SIM card.
64
65
Messages
Messages
To view a message, highlight it in the list using the
Write Messages
Menu 2.2
and
key and press the View soft key. The screen
shows the:
Via this menu, you can write text messages of up to
160 alphanumeric characters.
• Sender’s phone number (if sent with the message) or
name if it is available in your phonebook (inbox only)
Note: For further information on how to enter the
•
Date and time at which the message was received
(inbox only)
characters in your message, refer to page 43.
• Message text
After you complete the message, you can select the
following options.
To scroll through the message, press the
keys.
and
Send Only: enter the destination and select a setting
group in which you set up default information on the
SMS feature via the Setup menu (see the following
page).
You can choose the following options, by pressing the
Options soft key.
Delete: allows you to delete obsolete messages.
Save and Send: allows you to save a copy of the
message and then send the message to the required
destination. You are also required to select a setting
group. You can read the message in your outbox using the
Read Messages option.
Text Reply (inbox only): allows you to reply by sending
a text message. You can also change the SMS centre
number (if required).
Call Back (inbox only): allows you to call the sender
back.
Save Only: allows you to save the message so that it
can be sent later. You can read the message in your
outbox using the Read Messages option.
Cut Number: allows you to extract a number from the
message text, so that you can call the number or save it
in the phonebook.
Send: allows you to send a message that you have
received or saved. You can:
• Send the message
Preset Message
Menu 2.3
• Save and send the message
• Save but not send the message
Using this menu, you can preset up to five messages that
you use most frequently. This menu shows the preset
message list. Scroll through the list using the
keys. When the required message number appears, press
and
Edit Message: allows you to edit a message.
the Options soft key.
Note: The options available vary, depending on the
message status (new/old, not sent or sent for
example).
66
67
Messages
Messages
Edit: allows you to write a new message or edit the
Common Setting: two options are available.
selected preset message.
Reply Path: allows the recipient of your SMS message
to send you a reply message via your message centre, if
the service is provided by the network.
Note: For further information on how to enter the
characters in your message, refer to page 43.
Delivery Reports: allows you to activate or deactivate
the report function. When this function is activated, the
network informs you whether your message has been
delivered or not.
Send Message: allows you to recall the selected
message. Once you have completed the message, you
can send, save and send, or simply save it.
Delete: allows you to delete the selected message. You
are asked to confirm the deletion by pressing the Yes
soft key.
Broadcast
Menu 2.5
Setup
Menu 2.4
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Messages are displayed immediately they are received,
provided that:
Via this menu, you can set up default SMS information.
A setting group is a collection of settings required to
send messages. The number of setting groups available
depends on the capacity of your SIM card.
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the channel
list
Setting x (where x is the setting group number): each
group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
The last ten messages are also stored for later retrieval.
The following options are available.
Default Type: allows you to set the default message
type (Text, Fax, Email and Paging). The network can
convert the messages into the selected format.
Default Validity: allows you to set the length of time for
which your text messages will be stored at the message
centre while attempts are made to deliver them to you.
Setting Name: allows you to give a name to the setting
group currently being defined.
Read: lets you view the first message. Scroll through
the message using the
and
keys. At the end of
the message, press the Next soft key to move to the
next message.
68
69
Messages
Messages
Voice Mail
Menu 2.6
Receive: allows you to enable or disable the reception
of broadcast messages.
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
To quickly connect to the voice server, press and hold
Channel List: allows you to indicate the channels from
which you wish to receive broadcast messages. Several
options are available.
down the
key in the idle mode.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
Select: used to enable or disable channels in the list by
marking or unmarking them respectively (a check mark is
displayed in front of each channel selected).
Connect to Voice Server: before using this feature,
you must enter the voice server number obtained from
your service provider (see menu option 2.6.2). You can
then select this option and simply press the OK soft key
to listen to your messages.
Add Channel: used to declare the ID and title for a new
channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing
channel.
Voice Server: allows you to change the voice mail
server number.
Language: allows you to select your preferred language
to be used when displaying cell broadcast messages.
To...
Then press the...
Enter the server number
Corresponding numeric
keys.
Please contact your service provider for more
information.
Correct a digit
C key.
Move the cursor to
the left/right without
clearing the digit
or key.
71
70
Sound Settings
Sound Settings
You can use the Sound Settings feature to customise
various settings, such as the:
2. Press the Edit soft key and compose your melody
using the following keys.
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an error or
receive a message
To...
Then press the...
Enter a note between 1 to 7 keys respectively.
C and B (do and ti)
Move a note up or
down one octave
8 key.
Ring Tone
Menu 3.1
Insert the same
note again
Next soft key.
This option allows you to select the required ringing tone.
You can choose between 48 different tones. Each time you
select a tone, it is played for a few seconds. Two
Enter a rest
key (press the key until the
rest is of the required length).
additional options correspond to the melodies that you can
compose, using the Melody Composer menu option (3.2).
Delete a note
Move a note a
C key.
or
key (for example,
semitone up or down the note A changes to A#, B,
C, C# and so on in the scale,
each time you press the
Melody Composer
Menu 3.2
This option allows you to compose your own melody to
be used as the ring tone.
Three octaves are available. A maximum of 100 notes
can be entered. You can adjust the length of the notes
and add rests, as required.
key).
Change the length
of a note
key (the length will be
changed each time you press
the key).
Listen to your melody Listen soft key.
Composing a Melody
Modify your melody Modify soft key.
You can compose two melodies.
3. When you are satisfied with your melody, press the
1. When you access the menu, the names of any melodies
created are displayed. Otherwise, Melody 1 and
Melody 2 appear. Select the melody that you wish to
create or edit.
Save soft key.
72
73
Sound Settings
Sound Settings
Alert Type
Menu 3.4
4. Enter a title for the melody.
This option allows you to indicate how you are to be
informed of any incoming calls. The following options are
available.
Note: For further details on how to enter characters,
refer to page 43.
You are asked if the melody is to become the ring
tone.
Light only: only the backlight is switched on; the phone
neither rings nor vibrates.
5. To use the melody as the ring tone, press the Yes
soft key.
Melody: the phone rings using the ringing tone selected
via the Ring Tone menu option (3.1).
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed via the Ring Tone menu option (3.1).
Vibration: the phone vibrates but does not ring.
Note: In idle mode, you can set the phone to vibrate
only (silent mode) or to start ringing again, simply
by pressing one of the shortcut keys (for further
details, see page 91).
Otherwise, press the No soft key. The melody is
saved only.
Vibra+Melody: the phone first vibrates three times and
Deleting a Melody
then starts ringing.
1. Select the melody that you wish to delete.
2. Press the Delete soft key.
Keypad Tone
Menu 3.5
3. You are asked to confirm that you wish to delete the
melody by pressing the Yes soft key.
This option allows you to select the tone that the
keypad generates when you press a key. The following
options are available.
Ring Volume
Menu 3.3
OFF: the keys do not make any sound.
This option allows you to adjust the ringing volume to
one of five levels. Use the and keys or the
Tone: each key, when pressed, makes a different sound.
and keys on the left side of the phone. The greater
the number of bars, the greater the volume.
Beep: each key, when pressed, makes the same sound.
74
75
Sound Settings
Sound Settings
Message Tone
Menu 3.6
Minute Minder
Menu 3.8
This option allows you to select how the phone informs
you that a new message has been received.
This option allows you to specify whether the phone
must beep every minute during an outgoing call to keep
you informed of the length of your call.
The following options are available.
The following options are available.
OFF: the phone does not beep.
Light Only: the service light at the top of the phone
flashes.
Single Beep: the phone beeps once.
ON: the phone beeps every minute.
SMS Tone1~10: the phone uses an SMS tone. You are
provided with ten SMS tones.
Connect Tone
Menu 3.9
You can set your phone to beep when the person you are
calling answers the phone.
Error Tone
Menu 3.7
This option allows you to select how the phone informs
you that you have made a mistake.
The following options are available.
OFF: the phone does not beep.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
ON: the phone beeps to indicate an invalid entry.
76
77
Phone Settings
Phone Settings
Many different features of your phone can be customised
to suit your preferences. All of these features are
accessed via the Phone Settings menu.
Greeting Message
Menu 4.2
This option allows you to set a greeting message to be
displayed briefly when the phone is switched on. The
current message is displayed.
Infrared Activate
Menu 4.1
To...
Then press the...
This feature allows you to send or receive data/fax
through the infrared port. To use an infrared connection,
you must:
Clear the existing
message
C key and hold it down until
the message is cleared.
Enter a new message
Appropriate alphanumeric
keys.
• Install the modem driver for receiving or sending
data/fax (We recommend 14400 bps Data/Fax modem
by ‘Rockwell’ company)
• Install the network dial-up software supplied by your
service provider or a fax application program for a fax
call on your PC
Change the text input
mode
soft key.
For further details on how to enter characters, refer to
page 43.
• Configure and activate an IrDA-compliant infrared port
on your PC
Own Number
Menu 4.3
• Activate the Infrared feature on the phone; the
symbol appears on the top line of the display
• Dial the network service number given to you by the
service provider
This feature allows you to:
• Assign a name to each of your own phone numbers
registered on your SIM card
If there is no communication between your phone and
the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically deactivated.
• Edit the names and numbers
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
Any changes made here do not in any way affect the
actual subscriber numbers on your SIM card.
For further details, contact your service provider.
For information on downloading and installing the IrDA
program, vist to http://www.samsungmobile.com.
78
79
Phone Settings
Phone Settings
Language
Menu 4.4
Auto Redial
Menu 4.6
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available.
Light
Menu 4.5
OFF: the number is not redialled.
Back Light
ON: the number is redialled automatically.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time can
be achieved by turning the backlight off.
The following options are available.
Active Flip
Menu 4.7
OFF: the backlight is not used.
This option allows you to answer a call simply by
opening the flip.
Short: the backlight comes on when you press a key or
receive a call and switches off 10 seconds after the last
key is pressed.
The following options are available.
Long: the backlight comes on when you press a key or
receive a call and switches off 20 seconds after the last
key is pressed.
Disable: to answer a call, you must open the flip and
press a key, depending on the setting of the Anykey
Answer menu option (page 82).
Service Light
This option allows you to select whether or not the
service light on the top of the phone is used.
Enable: to answer a call, you simply open the flip.
The following options are available.
OFF: the service light is not used.
ON: the service light flashes when the phone is ready for
use.
80
81
Phone Settings
Organiser
The Organiser feature enables you to:
• View the calendar and organise your schedule
• Define a list of things to do
Anykey Answer
Menu 4.8
This option allows you to answer an incoming call by
pressing any key, except the
key.
• Set the current date and time
key and Reject soft
•
Set the alarm so that the phone rings at a specific time
(to remind you of an appointment for example)
ON: to answer a call, you can press any key except the
• Use the phone as a calculator
key and the Reject soft key. To reject the call,
• Assign functions to the navigation keys so that they
can be used as shortcuts giving direct access to your
favourite menus
press the
key or the Reject soft key.
OFF: to answer a call, you can only press the
key or
Accept soft key. To reject the call, press and hold down
the or key on the left side of the phone.
Calendar
Menu 5.1
With the Calendar feature, you can:
• Consult the calendar
Contrast
Menu 4.9
• Write memos to keep track of your schedule and
trigger an alarm if necessary
This option allows you to adjust the contrast of the LCD
screen by pressing the and keys or the and
keys on the left side of the phone.
Consulting the Calendar
When you select the Calendar menu option (5.1), the
calendar is displayed. The following options are
available when you press the Options soft key.
Reset Settings
Menu 4.10
Search all: displays all memos set, regardless of the
day and starting with the oldest. To scroll through the
You can easily reset your phone to its default config-
uration. To do so, proceed as follows.
memos, press the
and
keys.
1. Select the Reset Settings menu option.
Delete all: allows you to delete all memos. You are
asked to confirm your action.
2. Enter the 8-digit phone password.
Go to date: allows you to jump to a specific date.
Note: The password is preset to 00000000. To change
this password, refer to page 94.
83
82
Organiser
Organiser
Writing a Memo
Once you have finished editing the memo, press the OK
soft key. The following options are then available when
you press the Options soft key.
To write or edit a memo on a specific date, proceed as
follows.
Alarm: allows you to set the alarm to ring on the
chosen day.
1. Select the required date in the calendar, using the
navigation keys.
Erase: allows you to delete the memo.
Note: To skip to the previous or next month, press
the or keys on the left side of the phone.
Copy to: allows you to copy the memo to another date
and/or time.
2. Press the Select soft key.
An empty memo screen is displayed to allow you to
enter your memo.
Move to: allows you to change the date and/or time of
the memo.
3. Enter your memo and then press the OK soft key.
Note: For further details on how to enter characters,
To Do List
Menu 5.2
refer to page 43.
You are asked if you wish to set the alarm.
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark ( for tasks
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
to be done, ꢀ for completed tasks)
5. If you pressed Yes, set the time for the alarm and
press OK.
Creating the To Do List
A check mark is displayed in front of the date in the
calendar to indicate that a memo exists.
To create the To Do List, proceed as follows.
1. Press the New soft key.
2. Enter the first task.
Editing a Memo
If you select a day for which a memo already exists, you
can press the Edit soft key to edit the memo displayed.
Note: You can enter up to 48 characters. For further
details on how to enter characters, see
page 43.
Note: For further details on how to enter characters,
refer to page 43.
3. Press the OK soft key.
84
85
Organiser
Organiser
To...
Then...
4. Select high or low priority using the
or
keys
and the Select soft key.
Sort the existing • Press the Options soft key.
5. Enter your deadline.
tasks by priority
or status
• Select the Sort option.
• Select the sort criterion (high,
low, done, undo).
6. Press the OK soft key.
Editing the To Do List
Copy a task
• Highlight the task.
• Press the Options soft key.
• Select the Copy option.
• Change the text, priority and
deadline for the task as required.
If tasks are already defined in the To Do List when you
select the To Do List menu option (5.2), the current
contents are displayed with the associated status mark
and priority. The following options are available.
Delete a task
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
To...
Then...
View the details
for a specific task • Press the View soft key.
• Highlight the task.
Delete all tasks
• Press the Options soft key.
• Select the Delete all option.
• Confirm the deletion by pressing
OK.
Change the status • Highlight the task.
of a specific task • Press the
( or ꢀ) task as completed as of the
current date and time.
key to mark the
or
• Highlight the task.
Time & Date
Menu 5.3
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate status.
This option allows you to change the current time and
date displayed. You can also check the current time for
Greenwich Mean Time (GMT) and 21 major cities around
the world.
Create a new task • Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
Edit an existing
task
• Highlight the task.
• Press the Options soft key.
• Select the Edit option.
• Change the text, priority and
deadline for the task.
86
87
Organiser
Organiser
The following options are available.
Alarm
Menu 5.4
Set Time: allows you to enter the current time. You can
choose the time format via the Format menu option
(5.3.4).
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (5.3.3).
This feature allows you to:
• Set the alarm to ring at a specific time
• Set the phone to switch on automatically and ring the
alarm even if the phone is switched off (Autopower
menu option set to Enable)
Set Date: allows you to enter the day, month and year.
You can change the date format via the Format menu
option (5.3.4).
In the Alarm menu, the following options are available.
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, using the and keys.
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same
The screen shows the:
time.
• City name
• Current date and time
• Time difference between the selected city and your
city if you have set the local time (see below for
further details) or GMT (by default)
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
To set the alarm, proceed as follows.
1. Choose the alarm frequency option.
To select the time zone in which you are located,
proceed as follows.
2. Enter the required time and day of the week (if
applicable).
1. Select the city corresponding to your time zone by
pressing the or key one or more times.
The local date and time are displayed.
To stop the alarm when it rings, open the flip and press
the Exit soft key.
Remove Alarm: deactivates the alarm.
2. Press the Set soft key.
Autopower: if this option is set to Enable, switches
the phone on automatically when the alarm rings.
Format: allows you to change the time and date
formats.
Time format: 24 hours
12 hours
If the menu option is set to Disable and the phone is
switched off at the specified time, the alarm will not
ring.
Date format: YYYY/MM/DD (year/month/day)
DD/MM/YYYY (day/month/year)
MM/DD/YYYY (month/day/year)
89
88
Organiser
Organiser
ShortCut
Menu 5.6
Calculator
Menu 5.5
The down, left and right navigation keys and the C key
can also be used as shortcut keys. When held down in
idle mode, they allow you to access specific menu
options directly.
Using this feature, you can use the phone as a
calculator. The calculator provides the basic arithmetic
functions: addition, subtraction, multiplication and
division.
Using the Calculator
Using the ShortCut menu option (5.6), the following
menu options can be assigned to the shortcut keys:
1. Enter the first number using the numeric keys.
• None
2. Press the right soft key until the required arithmetic
symbol appears: + (add), - (subtract), x (multiply), /
(divide).
• Silent mode (Vibration setting in menu option 3.4)
• Calendar (menu option 5.1)
• Calculator (menu option 5.5)
• Messages (menu option 2)
• Sound Settings (menu option 3)
• To Do List (menu option 5.2)
• Voice Mail (menu option 2.6)
• Broadcast (menu option 2.5)
• Infrared Activate (menu option 4.1)
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display, press
the C key.
•
To include a decimal point or a bracket, press the
left soft key until the required symbol is displayed.
1. Select the key to be used as a shortcut key:
5. To calculate the result, press the
key.
• Key down (
• Key right ( )
• Key left ( )
)
• C held down (long press)
2. Select the menu option to be assigned to the key.
Note: To deactivate a shortcut key, select the None
option.
90
91
Security
Security
The Security feature enables you to restrict the use of
your phone to:
Change PIN
Menu 6.2
• The people of your choice
• The types of calls of your choice
This feature allows you to change your current PIN to a
new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you can
specify a new one.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (see also pages 22-25).
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
PIN Check
Menu 6.1
Phone Lock
Menu 6.3
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
Note: Before disabling the PIN Check feature, you must
The password is factory set to 00000000. To change the
phone password, refer to menu option 6.4 on the
following page.
Once the correct password has been entered, you can
use the phone until you switch it off.
enter your PIN.
To change your PIN, refer to menu option 6.2.
The following options are available.
Disable: the phone connects directly to the network
when you switch it on.
The following options are available.
Disable: you are not asked to enter the phone
Enable: you must enter the PIN each time the phone is
password when you switch the phone on.
switched on.
Enable: you are required to enter the phone password
when you switch the phone on.
93
92
Security
Security
Change Password
Menu 6.4
FDN Mode
Menu 6.6
The Change Password feature allows you to change your
current phone password to a new one. You must enter
the current password before you can specify a new one.
The FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The password is factory set to 00000000. Once you have
entered a new password, you are asked to confirm it by
entering it again.
The following options are available.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
SIM Lock
Menu 6.5
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM
lock code.
To change your PIN2, refer to menu option 6.7 below.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
Change PIN2
Menu 6.7
To unlock the SIM, you must enter the SIM lock code.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
94
95
Network Services
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by pressing
the
or
key until the appropriate option is
highlighted, and then press Select.
Call Diverting
Menu 7.1
2. Select the type of calls to be diverted by pressing the
or
key until the appropriate option is
This network service enables incoming calls to be
rerouted to the number that you specify.
highlighted and then press Select.
The current status is displayed. If the option has
already been set, the number to which the calls are
diverted is displayed.
Example: You may wish to divert your business calls to
a colleague while you are on holiday.
Call diverting can be set up in the following ways.
3. To...
Then...
Divert Always: all calls are diverted.
Activate call
diverting
• Press the Activate soft key.
• Go to step 4.
Busy: calls are diverted if you are already making
another call.
Change the
call number
• Press the Change soft key.
• Go to step 4.
No Reply: calls are diverted if you do not answer the
phone.
Deactivate call Press the Remove soft key.
diverting
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
4. Enter the number to which the calls are to be
diverted and press OK.
You can specify individual diverting options for each of
the following call types:
• Voice calls only
To enter the international code, press the 0 key until
the + sign is displayed.
• Fax calls only
• Data calls only
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
Example: You can:
• Systematically divert fax calls to your office
fax machine
You can deactivate all call diverting settings by selecting
the Cancel All option.
• Divert voice calls to your colleague if you
are already using the phone
96
97
Network Services
Network Services
Call Barring
Menu 7.2
2. Select the type of calls to be barred by pressing the
or
key until the appropriate option is
highlighted and then press Select.
The call barring network service allows you to restrict
your calls.
3. Press the Activate soft key to confirm your settings.
Call barring can be set up in the following ways.
All Outgoing: calls cannot be made.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
International: international calls cannot be made.
International Except to Home: when abroad, calls
can be made only to numbers within the current country
and to your home country, that is the country where your
home network provider is located.
To deactivate specific call barring settings, proceed as
follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Deactivate soft key.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside your home
service area.
4. Enter your call barring password supplied by your
service provider.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can specify individual barring options for each of
the following call types:
• Voice calls only
You can also deactivate all call barring settings by
selecting the Cancel All option.
• Fax calls only
• Data calls only
Change Barring Password: you can set and change
the call barring password obtained from your service
provider using this option. You must enter the current
password before you can specify a new one.
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing the
or
key until the appropriate option is
Once you have entered a new password, you are asked
to confirm it by entering it again.
highlighted and then press Select.
98
99
Network Services
Network Services
Call Waiting
Menu 7.3
Network Selection
Menu 7.4
This network service enables you to be informed when
someone is trying to reach you during another call.
The Network Selection feature enables you to indicate
whether the network used when roaming (outside your
home area) is selected automatically or manually.
You can specify the call waiting option for voice calls
only.
Note: You can select a network other than your home
network only if it has a valid roaming agreement
with your home network.
To set your call waiting options, proceed as follows.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed
as follows.
1. Select the Voice Calls option by pressing the
Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
1. When Network Selection is displayed, press the
Select soft key.
2. You can activate or deactivate the call waiting feature
as necessary using the Activate or Deactivate soft
key respectively.
2. Press the
or
key until the appropriate option is
highlighted and then press the OK soft key.
If you select Automatic, you are connected to the
first available network when roaming.
To return to the previous screen, press the Exit soft
key.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
3. Press the
or
key until the preferred network
is highlighted and then press the OK soft key.
You are connected to that network.
100
101
Network Services
Network Services
Caller ID
Menu 7.5
Closed User Group (CUG)
Menu 7.6
You can prevent your phone number from being
displayed on the phone of the person being called.
This network service allows incoming and outgoing calls
to be restricted to a selected user group. You may be a
member of up to ten user groups.
For details on how to create, activate and use a closed
user group, contact your service provider.
Note: Some networks do not allow the user to change
this setting.
The following options are available.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
Default: the default setting provided by the network is
used.
Hide Number: your number is not displayed on the
other person’s phone.
Activating a Closed User Group
Send Number: your number is sent each time you
make a call.
If you select the Closed User Group menu, you can
enter the CUG function. You can now access the
following options after pressing the Select soft key.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears. Add a
new CUG index (as advised by your service provider) or
delete a selected group.
To...
Then press the...
or keys.
Scroll through the
existing CUG indexes
Add a new CUG index
Options soft key, select the
Add option and enter the
index.
102
103
Network Services
WAP Browser
To...
Then press the...
Your phone is equipped with a WAP Browser to allow
you to access and navigate the Wireless Web via your
phone.
Delete a CUG index
Options soft key and select
the Delete option.
For further details on the WAP Browser menu, refer to
the WAP Browser User’s Manual supplied with your
phone.
Activate a CUG index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those nominated for the Closed User
Group. This feature depends on the nature of your CUG
subscription. Please check with your service provider.
Default Group: you may communicate a default CUG to
your service provider. If you have done so, you can
enable the Default Group option on your phone. When
making a call, you will be given the option of using your
default CUG, instead of selecting one from the list.
Deactivate: deactivates the CUG function. This menu
appears only when the default group is enabled or a
CUG index is selected.
104
105
Solving Problems
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
“No service”, “Network failure” or “Not done” is
displayed
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
When you switch your phone on, the following
messages may appear
• You are trying to access an option for which you have
not taken out a subscription with your service
provider. Contact the service provider for further
details.
Insert SIM Card
• Check that the SIM card is correctly installed.
You have entered a number but it was not dialled
Phone Locked
Enter Password
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
• The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
Your correspondent cannot reach you
• Is your phone switched on (
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Enter PIN
pressed for more
• You are using your phone for the first time. You must
enter the Personal Identification Number supplied
with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on was enabled. You must
enter your PIN and then disable this option if so
required.
Your correspondent cannot hear you speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom of
the phone.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
106
107
Solving Problems
Using the Batteries
The phone starts beeping and “**Warning** Low
Battery” flashes in the display
• The battery is insufficiently charged. Replace the
battery and recharge it.
Your phone is powered by a rechargeable Li-ion battery.
The following batteries are also available (ask your
SAMSUNG dealer for further details):
– Standard battery
– Slim battery
The audio quality of the call is poor
• Check the signal strength indicator in the display
(
); the number of bars after it indicates the
Precautions When Using Batteries
signal strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
• Never use any charger or battery that is damaged in
any way.
No number is dialled when you recall a phonebook
entry
• Check that the numbers have been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base station,
it uses less power; talk and standby times are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a
new battery.
If the above guidelines do not enable you to solve the
problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
• If left unused, a fully charged battery will discharge
itself over time.
108
109
Using the Batteries
Safety Information
Road Safety
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a vehicle.
Always park the vehicle before having a conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Do not leave the battery in hot or cold places, such as
in a car in summer or winter conditions, as you will
reduce the capacity and life-time of the battery.
Always try to keep the battery at room temperature. A
phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion
batteries are particularly affected by temperatures
below 0 °C (32 °F).
• Only qualified personnel should install or service the
phone in a vehicle. Faulty installation or service may
be dangerous and may invalidate any warranty
applicable to the unit.
• Electronic fuel injection, anti-skid braking, electronic
cruise control or any other electronic systems may
malfunction due to the lack of protection from radio
signals. Check regularly that all cellular phone
equipment in your vehicle is mounted and operating
correctly.
•
Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin, clip or
pen) causes a direct connection between the + and –
terminals of the battery (metal strips on the battery), for
example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
Operating Environment
• Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger (in a hospital for
example).
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
110
111
Safety Information
Safety Information
Care and Maintenance
• Operation of any radio-transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical device if
you have any questions. Other electronic equipment
may also be subject to interference.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories out
of the reach of small children.
• As with other mobile radio-transmitting equipment,
you are advised that for satisfactory operations and
personal safety, the equipment should only be used in
the normal operating position.
• Keep the phone dry. Precipitation, humidity and liquids
containing minerals will corrode the electronic
circuits.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the need
to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
• Do not use or store the phone in dusty, dirty areas as
its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt certain
plastics.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature, moisture
can form inside the phone, which may damage the
electronic circuits.
• Switch off your cellular phone when in aircraft. The
use of cellular phones in aircraft is illegal and may be
dangerous to the operation of the aircraft or disrupt
the cellular network. Failure to observe these
instructions may lead to the suspension or denial of
cellular telephone services to the offender, legal
action or both.
• Do not attempt to open the phone’s casing.
Non-expert handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling may
damage the internal circuits.
112
113
Safety Information
Glossary of Terms
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not working
properly, take them to your nearest qualified service
centre. The personnel there will assist you, and if
necessary, arrange for the phone to be repaired.
Active Flip
Ability to answer a call simply by opening the phone.
Call Barring
Emergency Calls
Ability to restrict outgoing and incoming calls.
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline networks,
as well as user-programmed functions that
cannot guarantee connection in all
Call Diverting
Ability to reroute calls to another number.
conditions. Therefore, you should never rely
solely on any cellular phone for essential
communications (medical emergencies for
example).
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between the
two calls, as required.
Remember, to make or receive any calls, the phone must
be switched on and in a service area with adequate
cellular signal strength.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
114
115
Glossary of Terms
Glossary of Terms
DCS
Phone Password
Digital cellular network standard based on the GSM
network architecture. With the higher frequency range
(1800 MHz for DCS instead of 900 MHz for GSM), more
radio channels can be made available, thus allowing the
network to support more subscribers and traffic.
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-
digit number and can be changed, as required.
Dual Band
Ability to operate with both DCS (1800 MHz) and GSM
(900 MHz) networks. The phone automatically uses the
network with the strongest signal and even switches
networks during a call within the same operator’s
network.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and
many other parts of the world.
Roaming
Use of your phone when you are outside your home area
(when travelling for example).
Line Identification Services (Caller ID)
SDN (Service Dialling Numbers)
Services allowing subscribers to view or block the
telephone numbers of callers.
Telephone numbers supplied by your network provider
and giving access to special services, such as voice
mail, directory inquiries, customer support and
emergency services.
Multiparty Calling
Ability to establish a conference call involving up to five
additional parties.
116
117
Glossary of Terms
Index
Calls (continued)
A
SIM (Subscriber Identification Module)
time (1.4) • 63; 77
via the phonebook • 36
waiting (7.3) • 52; 100
Card
Access codes • 22
Accessories • 9
Card containing a chip with all the information required
to operate the phone (network and memory information,
as well as the subscriber’s personal data). The SIM card
fits into a small slot on the back of the phone and is
protected by the battery.
Active Flip (4.7) • 29; 81
Alarm (5.4) • 89
installing the SIM • 17
Care • 113
Changing
Alert Type (3.4) • 75
Answering
a call • 29; 82
call barring password • 99
password (6.4) • 94
PIN (6.2) • 93
a second call • 52
Anykey Answer (4.8) • 29; 82
Auto Redial (4.6) • 81
Autopower (5.4.5) • 89
PIN2 (6.7) • 95
SMS (Short Message Service)
Characters
changing case • 44
entering • 43
B
Network service sending and receiving messages to and
from another subscriber without having to speak to the
correspondent. The message created or received (up to
160 characters long) can be displayed, received, edited or
sent.
Backlight • 14; 80
contrast • 82
Barring
Charging batteries • 19
Closed User Group (7.6) • 103
Composer
calls (7.2) • 98
password • 25; 99
Batteries
Melody (3.2) • 72
Conference calls
• See Multiparty calls
Connect
charging • 19
low battery indicator • 20
precautions • 109
Broadcast (2.5) • 69
to Voice Server (2.6) • 71
tone (3.9) • 77
Soft Keys
Contrast (4.9) • 82
Copying
Two keys ( ) on the phone, the purpose of which:
• Varies according to the function that you are currently
using
• Is indicated on the bottom line of the display just
above the corresponding key
C
memos • 85
Calculator (5.5) • 90
Calendar (5.1) • 83
Caller
phonebook numbers • 40
Correcting numbers • 26
Cost of calls • 64
CUG • 103
group • 40
ID (7.5) • 102
Calls
D
Date
answering • 29; 82
a second call • 52
barring (7.2) • 98
cost (1.5) • 64
dialled (1.3) • 63
diverting (7.1) • 96
emergency • 8; 114
ending • 27
holding • 48
international • 26
making • 26
missed • 30; 62
multiparty • 53
received (1.2) • 62
records (1) • 62
redialling automatically • 81
Voice Mail
format (5.3.4) • 88
setting (5.3.2) • 88
Deleting
Computerised answering service that automatically
answers your calls when you are not available, plays a
greeting (optionally in your own voice) and records a
message.
memos • 83; 85
missed calls • 31
phonebook numbers • 40
tasks • 87
Dialled Calls (1.3) • 63
Display • 13
contrast • 82
external • 15
icons • 13
setting the
language (4.4) • 34; 80
Diverting calls (7.1) • 96
118
119
Index
Index
Keypad Tone (3.5) • 75
Keys
Missed calls (1.1) • 62
deleting • 31
Pasting phonebook numbers • 39
Personal Identification Number
• See PIN
E
Earpiece
adjusting the volume • 28
Editing
memos • 84
description • 11
location • 10
navigation • 55
shortcut • 91
editing the number • 31; 62
viewing • 30; 62
Multiparty calls
Personal Unblocking Key • 23
Phone
dropping a participant • 54
making • 53
Lock (6.3) • 93
messages • 66
missed calls• 31; 62
phonebook numbers • 40
tasks • 86
password • 22; 94
Settings (4) • 78
Phonebook • 36
copying numbers • 40
dialling • 38
L
private conversation • 53
Mute
Language (4.4) • 34; 80
Last number redialling • 27
Length of calls • 63; 77
Letters
key tones • 50
microphone • 49
To Do List • 86
Emergency calls • 8; 114
Erasing
editing numbers • 40
erasing numbers • 40
making calls • 27
options • 39
N
Names
changing case • 44
entering • 43
Light
memos • 83; 85
missed calls• 31
phonebook numbers • 40
tasks • 87
entering • 43
backlight • 14; 80
service • 15; 80
Locking
phone (6.3) • 93
SIM card (6.5) • 94
Low battery indicator • 20
Lower-case characters
entering • 46
pasting numbers • 39
searching • 38; 51
storing numbers/names • 36
PIN • 23
searching/dialling • 38; 51
storing in the phonebook • 36
Navigation keys • 55
Network Selection (7.4) • 101
Network Services (7) • 96
Numbers
Error Tone (3.7) • 76
External display • 15
changing (6.2) • 93
checking (6.1) • 92
PIN2 • 24
F
FDN Mode (6.6) • 95
Fixed Dial Number mode • 95
Functions
copying phonebook • 40
correcting • 26
changing (6.7) • 95
Port
editing
selecting • 32
M
infrared • 78
missed call • 31; 62
phonebook • 40
Maintenance • 113
Melody Composer (3.2) • 72
Memory status • 42
Memos
Preset Message (2.3) • 67
Problem solving • 106
PUK • 23
G
entering • 47
Greeting Message (4.2) • 79
Groups
erasing phonebook • 40
fixed dial • 95
PUK2 • 24
caller • 40
user • 103
copying • 85
own • 79
deleting • 83; 85
editing • 84
R
pasting • 39
redialling • 27
Read Messages (2.1) • 65
Received Calls (1.2) • 62
Redialling
H
writing • 84
automatically • 81
searching/dialling • 38; 51
storing in the phonebook • 36
Menus
Holding calls • 48
map • 57
automatically (4.6) • 81
last number • 27
Reset Settings (4.10) • 82
Ring
Tone (3.1) • 72
type • 75
Volume (3.3) • 74
Roaming • 101
numbers • 56
I
using • 55
Icons
O
Options
selecting • 32
Organiser (5) • 83
Own Number (4.3) • 79
Message Tone (3.6) • 76
Messages
description • 13
Identifying a caller • 29; 102
Infrared Activate (4.1) • 78
IrDA • 78
broadcast (2.5) • 69
greeting (4.2) • 79
preset (2.3) • 67
reading (2.1) • 65
setup (2.4) • 68
text • 65
K
Key tones
P
S
Safety
batteries • 109
information • 111
precautions • 7
Schedule • 83
Password
adjusting the volume • 28
muting • 50
selecting • 75
sending • 50
voice mail • 71
writing (2.2) • 67
Microphone mute • 49
Minute Minder (3.8) • 77
barring • 25
changing • 99
phone • 22
changing (6.4) • 94
120
121
Index
SDN • 42
Text messages • 65
broadcasting (2.5) • 69
icon • 65
preset (2.3) • 67
reading (2.1) • 65
setup (2.4) • 68
writing (2.2) • 67
Time
calls (1.4) • 63; 77
format (5.3.4) • 88
setting (5.3.1) • 88
world (5.3.3) • 88
To Do List (5.2) • 85
Tone
Searching for names/
numbers • 38; 51
Security (6) • 92
Selecting functions/
options • 32
Sending
key tones • 50
messages • 65
Service
dialling numbers (SDN) • 42
light • 15; 80
Setting
alarm (5.4) • 89
date (5.3.2) • 88
display language • 34; 80
time (5.3.1) • 88
Settings
connect (3.9) • 77
error (3.7) • 76
keypad (3.5) • 75
melody • 75
message (3.6) • 76
ring (3.1) • 72
resetting (4.10) • 82
Setup (2.4) • 68
ShortCut (5.6) • 91
SIM card
Travel adapter • 19
T9 mode • 43; 44
installing • 17
U
locking (6.5) • 94
precautions • 17
SIM Lock (6.5) • 94
SMS
Upper-case characters
entering • 46
User groups • 103
broadcast (2.5) • 69
setup (2.4) • 68
text message icon • 65
using • 52; 65
V
Vibration • 75
Voice mail • 71
Voice Server (2.6.2) • 71
Volume
Soft keys • 32
Solving problems • 106
Sound Settings (3) • 72
Speed-dialling • 37
Switching on/off
microphone • 49
phone • 21; 89
adjusting • 28
selecting the ring (3.3) • 74
W
Waiting
call • 52; 100
T
Tasks
defining• 85
Text
WAP Browser (8) • 105
World Time (5.3.3) • 88
Write Messages (2.2) • 67
Writing memos • 84
changing modes • 44
entering • 43
122
123
124
|