SCH-i830 Series
Global Quadband Pocket PC
Phone
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
YI05.(1.2)_WB_101305_F4
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other works
ofauthorship. Youmaynotinfringeorotherwiseviolatetherights
securedbytheIntellectualProperty. Moreover, youagreethatyou
willnot(andwillnotattemptto)modify,preparederivativeworks
of,reverseengineer,decompile,disassemble,orotherwiseattempt
tocreatesourcecodefromthesoftware. Notitletoorownershipin
theIntellectualPropertyistransferredtoyou.Allapplicablerights
of the Intellectual Property shall remain with SAMSUNG and its
suppliers.
Samsung Telecommunications America, L.P.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7001
Fax: 972.801.6065
Internet Address: http://www.samsungusa.com
©
2005 Samsung Telecommunications America, L.P. isa registered
trademark of Samsung Electronics America, Inc. and its related
entities.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINEDONTHEWARRANTYPAGEENCLOSEDWITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT
"AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT,INCLUDINGBUTNOTLIMITEDTOTHE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT
BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
WOWTM technologyisincorporatedunderlicensefromSRSlabs,
Inc.
SRS WOW, and
symbol are trademarks of SRS Labs, Inc.
VoiceSignal is a trademark and the VoiceSignal logo is a
registered trademark of VoiceSignal Technologies, Inc.
Microsoft, ActiveSync, MSN, Outlook, Windows, the Windows
logo, and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or
other countries.
Bluetooth is a trademark owned by its proprietor and used by
Samsung Telecommunications America, Inc. under license.
Printed in Korea
Table of Contents
Table of Contents
7
8
Table of Contents
9
10
Section 1: Getting Started
Topics Covered
• Activating your phone
• Setting Up Voicemail
• Understanding this User Manual
This section allows you to start using your phone by
activating your service, setting up your voice mail, and
getting an understanding of how this manual is put
together. For more information contact your service
provider.
Section 1: Getting Started
11
Activating Your Phone
If you have upgraded your phone to the i830 from an
existing Verizon Wireless phone, you will need to call
Verizon Wireless to have it activated and move your
existingmobilenumbertoyournewSamsungi830Global
phone.
If you are a new Verizon Wireless customer and the
mobile number assigned to the phone is new, simply
insertthe SIM card anddial *228 toprogram your phone.
If you have any questions, please call Verizon Wireless.
To activate your phone, follow these steps:
1. Visit a Verizon Wireless Store and have your phone
activated, or visit www.verizonwireless.com and place
your cursor on the MY ACCOUNT tab available on the
home page.
2. When the drop-down menu displays, select ACTIVATE
PHONE to display instructions needed to activate your
phone online.
3. After gathering the required materials, select the
Activate New Phone link and follow the online
directions to complete the activation process.
Setting Up Your Voicemail
All unanswered calls to your Samsung i830 are sent to
voicemail, even if your device is turned off. Therefore,
you’ll want to set up your voicemail and personal
greeting as soon as you activate your i830. Your service
providerhasassignedyourvoicemailnumbertothe
key.
12
Setting Up Your Voicemail
Set up Voicemail (CDMA)
1. Press
, located on the bottom front of the phone,
to dial the voicemail system.
to display the phone screen.
2. Tap and hold
Note: Use of the
voicemail without using speed dial, simply dial your own phone number
and when the system answers, enter your password and press
key is reserved for speed dialing voicemail. To dial
.
3. When the system answers, enter your password and
then tap
4. Follow the prompts to setup your voicemail.
.
Set up Voicemail
Voice mail setup (GSM mode)
1. In standby mode, press and hold
, a “+” displays.
2. Press
again, then enter your own mobile number
to dial voice mail.
3. Press
to interrupt the greeting.
4. Follow the prompts in the new user tutorial to setup your
mailbox.
Check Voicemail (CDMA Mode)
1. Tap the alert icon
at the top of the screen.
Note: The alert icon is displayed when more than one alert is available.
2. Tap the voice mail icon
. You can also tap and hold
to speed dial voicemail.
Section 1: Getting Started
13
3. Tap the Voice Mail button to connect.
4. When the voicemail system connects, enter your
password and then tap
.
5. Press to listen to your messages.
Check Voicemail (GSM Mode)
1. In standby mode, press and hold the
soft key or
dial +
and your own mobile number to dial
voicemail. After Connecting a recorded message
prompts you to press
if you have a mailbox on the
system. You will then be prompted to enter your 10 digit
mobile phone number.
2. Enter your 10 digit mobile phone number.
3. When you hear the voice greeting, press
, enter
your password, and follow the recorded prompts.
Understanding this User Manual
Thechaptersofthisguidegenerallyfollowthesameorder
as the menus and sub menus in your phone. A robust
index for quick reference to most features begins on page
Also included in this manual is important safety
information that you should know before using your
phone. Most of this information is near the back of this
guide, beginning on page 187.
14
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Front View of Your Phone
• Closed View of Your Phone
• Key Features and Command Keys
• Locking Your Samsung SCH-i830
• Display Icons
• Installing Your SIM Card
• Battery
This section outlines manykeyfeatures of your phone. It
also describes the display icons, frequently used
command keys, your display, and how to install your
battery.
Section 2: Understanding Your Phone
15
Features of Your Phone
Congratulations on your purchase of the Samsung
SCH-i830.Thei830usestheMicrosoftWindowsMobile™
2003 software for Pocket PC Phone Edition, which
supports thousands of applications. Using ActiveSync®,
you can keep your PC and i830 synchronized at all times.
The features listed below are just a sample of what your
SCH-i830 has to offer. You should read this guide to
understand the many features that this phone supports
and keep it handy for reference.
Key Features of the SCH-i830
• Large 240x320 pixel, 65k color TFT screen
• Wireless Internet Capability
• 1X/EVDO/GSM/GPRS Capability
• Global Positioning System (GPS)
• Windows Mobile™ 2003 Software for Pocket PC Phone Edition,
2nd Edition
• 2-Way Text Messaging
• Email Message Service
• Secure Digital Expansion Slot (SD I/O)
• Advanced Speech Recognition Technology
• Voice Memo
• Built-in Bluetooth Wireless Technology
• LED (Green: System, Red: Phone, Blue: Bluetooth, Purple:
Battery Charging)
• GSM/GPRS-International standard for cellular communication
16
2. Title Bar: The Title bar at the top of the screen displays
the active program, wireless status, and current time,
and allows you to close screens. Use the Start menu to
select a program.
3. Today Screen: This screen displays all the information
needed to operate your phone.
4. Headset Jack: Built-in stereo headset jack.
5. Voice Notes Key: This key launches the voice notes
option which allows you to record voice notes and save
them on your phone.
6. Volume Key: Allows you to adjust the ringer volume in
standby mode (with the slider open) or adjust the voice
volume during a call. To mute the ringer during an
incoming call, press the volume key up or down.
7. 4-Way Navigation Key: This key allows you to scroll
through the phone menu options.
8. Send Key: This key is used to initiate your calls or to
activate your phone feature.
9. PDA Power/Key Lock: Use to turn your PDA device on
and off or lock your built-in keyboard.
10. Built-in QWERTY Keyboard: Use these keys to enter
numbers, letters, and characters.
11. Power/Accessory Interface Connector: Used to plug in
the charging accessories and also connect any available
accessory cables to your phone.
12. Back Key: Cancels the current function, or if in a menu,
this key steps back through previous menus.
18
Key Functions
13. End Key: Ends a call. Press and hold this key for a few
seconds to turns the radio On or Off. When you receive
an incoming call, press to mute the ringer and send the
call to voicemail.
14. SD Card I/O Slot: This I/O expansion slot allows you to
insert an SD memory card to add additional memory and
storage capacity.
15. Action Key: Pressing when navigating through a menu
selects the highlighted choice in the menu.
16. Status Icons: These icons indicate, current signal
strength, and the availability of many other features and
functions of your phone.
Section 2: Understanding Your Phone
19
Closed View of Your Phone
Key Functions
1. IrDA/LED: Used to exchange data and information
between your phone and another device using infrared
signaling. Also indicates when certain features are active
on your phone such as Bluetooth wireless technology.
2. Context Menu Key: Launches menus or other option
screens for the currently highlighted choice on your
display.
20
Command Keys
3. Calendar Key: Launches your Calendar feature when
selected.
4. Reset Button: Resets your phone and ends all
applications currently running.
5. Microphone: The Microphone allows other callers to hear
you clearly when you speak to them.
6. Contacts Key: Launches your Contacts feature when
selected.
7. Launcher Key: Displays the Launcher menu when
selected.
8. Antenna: Your phone’s built-in antenna.
Command Keys
Powering On
To power up the i830, press the
key down until the
backlightcomeson.ThePDAPowerkeyislocatedonthe
lower left side of your phone.
Note: If you push the PDA Power key to its upper position, you will lock all
keys, except for Send/End/Volume, which work during calls. Set the key in
its center position to unlock.
Follow the steps on the display screen to calibrate the
device. To turn your phone off, press and hold
the backlight turns off.
until
Your Pocket PC’s Keypad
The keys of the i830 are functionally divided into three
groups. The Navigation keys, Alpha-numeric keypad,
and Hot keys.
Section 2: Understanding Your Phone
21
1. 4-Way Navigation Key:
Access and scroll through
menus and lists, confirm
changes that you’ve entered,
and interact with menus that
appear in the display.
1.
2.
2. Built-in QWERTY Keyboard:
Enter text, numbers, and
symbols.
3. Hot keys: Located on both
sides of the SCH-i830 Pocket
PC. Used to launch
applications, increase
volume, power the SCH-i830
Pocket PC on and off, and
more.
3.
Send Key
Press
at the Today screen to display the phone
screen, or to dial a call after you have entered a telephone
number.
Back Key
Press the
key to close the current menu and return to
a previous menu or screen. The Back key also cancels
some functions like composing a message or exiting
Launcher.
Navigation/Action Key
UseanyofthefourdirectionalarrowsontheNavigation/
Action key to scroll through and highlight items, menus,
22
Locking Your Pocket PC
and programs in a list or on the Internet. Once an item,
link, or menu is highlighted, press the action
perform the function related to the selection.
key to
Voice Notes Key
Briefly press the Voice Notes Key to record or display
any recordings that you have made. You have the option
of recording a new memo or playing a stored memo.
When your memo list displays, either highlight the
recording you want and tap to play the memo, or
simply tap
and speak clearly into the your phone’s
microphone to record a new memo.
Volume Keys
Pressandreleasetheupordownvolumekeys toadjust
audio volume for any screen.
Note: The volume can only be adjusted when the screen is active.
Locking Your Pocket PC
When you lock your phone, it requires a password to
return to normal operation. When a password is set up,
the phone can be locked immediately or configured to
lock when the screen blanks out.
Lock the i830
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings. The Personal tab is highlighted.
3. Tap Password.
4. Tap the check box next to Prompt if device unused for.
Section 2: Understanding Your Phone
23
5. Tap the drop down arrow to select the amount of unused
time before you are prompted for a password.
6. Select one of the following options:
• Simple 4 digit
• Strong alphanumeric
7. Tap the Password box and enter the password you
want.
8. Tap
, then tap Yes to confirm.
Unlock the i830
To unlock your phone:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings. The Personal tab is highlighted.
3. Tap Password.
4. Tap your password on the keypad. If you enter the
correct password, you’re returned to the Password
screen.
5. Tap the box to the left of Prompt if device unused for to
remove the check mark.
6. Tap
, then tap Yes to confirm.
Password Hint
Use the Hint feature to provide a password hint in case
you forget your password.
1. At the Password screen, tap the Hint tab.
2. Enter a hint for your password in the dialogue box.
3. Tap
to save your settings and exit.
24
Display Icons
Note: The password hint you set will only appear after four consecutive
incorrect password entries.
Display Icons
VariousiconsappearinyourPocketPC’sdisplaysorTitle
Barduringoperation.Thefollowingtableliststheseicons
as well as their descriptions.
IconDefinition
Indicates signal strength. More bars mean better
signal.
Indicates GPS is on for location.
Indicates GPS for 911 is active.
Indicates your device is in Flight mode and your
cellular radio is turned off (i.e. the phone is turned Off
but the PDA is On).
Indicates the system speaker for the selected profile is
set to On.
system speaker
Indicates the
set to Off.
for the selected profile is
Indicates the ringer for the selected profile is set to
Vibrate.
Indicates your Pocket PC is charging.
Section 2: Understanding Your Phone
25
Indicates the 1xRTT high speed data transfer protocol is
supported.
Ev-Do protocol: Indicates your phone has high speed
data services, for video streaming and downloads.
1X EV-DO(icon): Indicates your phone is hybrid (1X and
EV-DO) mode.
Your phone is outside your home area. While roaming,
another wireless provider may be handling your call.
The service rate for the call may be higher than those
made from within your home area. Please refer to
Verizon Wireless for roaming rates. .
Note: The roaming indicator may not work in GSM networks.
Indicates ActiveSync or a Data Session is currently in
use.
Indicates two or more message icons are being
displayed, your battery charge is low, or you have
missed a call.
Indicates you have a new text message. If you tap this
icon, a window is displayed that allows you to access
the Inbox.
Indicates you have a new voicemail message. If you tap
this icon a window is displayed that allows you to listen
to new voicemail messages.
Indicates you have a missed call. If you tap the icon a
window is displayed indicating the number of calls
missed. It also gives you the ability to view the missed
call information.
26
Intalling Your SIM Card
Indicates your Pocket PC is in Speakerphone mode.
Indicates that Voice Privacy is available.
Indicates the status of the Bluetooth radio, either On or
Off..
Indicates the key is locked.
Intalling Your SIM Card
BeforeyoucanusetheGSMfeaturesinyourphone,you’ll
need to install a SIM card. SIM cards are provided by
Verizon Wireless.
1. With the battery
removed from the
phone, insert the SIM
card face down into the
slot provided.
2. Slide the SIM card as far
as possible to the right,
beneath the SIM card
retaining brackets.
3. Once the card is secured
in the SIM slot, install
the battery as outlined in the following section, then turn
the phone on.
Section 2: Understanding Your Phone
27
Remove the SIM card
Note: Press and hold
off the phone (if on).
to turn
1. Remove the battery.
2. Slide the SIM card to
the left, then lift to remove.
Important: Please handle the SIM card on its sides. Avoid touching the
circuits as this may cause damage to the SIM.
Important: Verizon Wireless has provided a unique SIM card to be used
with your SCH-i830.
Battery
The i830 comes with a standard rechargeable battery,
power accessory, and headset.
Note: The battery for the i830 can be charged before it is fully drained
without causing damage.
Install the Battery
1. Place the battery on the back of the phone, making sure
the plastic tabs are aligned with the corresponding holes
in the phone.
28
Charge the Battery
Note: The i830 comes with a rechargeable battery. Fully charge this
battery before using your phone.
Your phone is powered by a rechargeable standard
Li-ion battery. Only use Samsung-approved charging
devices and batteries. Samsung accessories are designed
to maximize battery life. Using other accessories may
invalidate your warranty and may cause damage.
Checking Battery Charge
Keeping track of the battery’s charge is important. If the
battery level becomes too low, your phone automatically
shuts down and you could lose important data. For a
quick check of your phone’s battery level, tap the time
located in the upper right corner of the screen. A battery
icon is displayed in the Time and Next Appointment
window.
To perform a battery check using the drop down menu:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the System tab at the bottom of the screen.
4. Tap Power.
Battery Capacity
When the battery becomes low, a warning window
displays and the backlight turns off.
30
Battery
Note: Long backlight settings, searching for service, vibrate mode and
browser use affect the battery’s talk and standby times.
There is also an internal backup battery that saves all
settings in the phone if the regular battery is discharged.
An internal backup battery needs an initial charge of 24
hours.
The internal battery maintains data for about four hours.
Perform ActiveSync operations or a backup utility
frequently to avoid loosing any information in case the
battery is fully discharged. For more information see
Section 2: Understanding Your Phone
31
32
Section 3: Call Functions
Topics Covered
• Making a Call
• Phone Modes
• Answering a Call
• Using the Speakerphone
• Your Phone Number
• Call Log
• Roaming
• TTY
• VoiceSignal
Thissectiondescribeshowtomakeoranswercalls.Italso
includes the features and functionality associated with
using your phone, as well as explaining the voice
command feature built into your Samsung SCH-i830.
Section 3: Call Functions
33
Making a Call
There are several ways to make calls on your new i830.
You can use speed dial, voice dial, call history, or simply
enter the desired number and tap
.
Note: Keys, such as
, are referred to as “soft” keys because they
are not part of the hardware. Soft keys are touch-sensitive keys, appear in
your display, and change function according to the feature being used.
Place a Call Using Soft Keys
1. Set the PDA Power key to its middle position.
2. With the slider down, tap Start, then select Phone from
the drop down menu or Press the
the dialer.
key to access
3. Tap the desired number using the stylus. If you make a
mistake while dialing, tap . If you tap and hold
, all digits are cleared and you can start over.
Note: Always use the stylus when touching the screen to avoid scratching
or damage caused by other instruments.
4. Tap
. The number is dialed.
Dialing Emergency Numbers
You can dialany of the numbers 911, *911, or #911 to place
an emergency call.
IfyourphoneisinVerizonCDMAmode, dial911, *911, or
#911, then press
.
If your phone is in Int’l GSM mode, dial 911, then press
.
34
Phone Modes
Note: If you dial 112 or 999 while in Int’l (GSM) mode, your phone dials the
emergency number immediately (no prompt).
Placing GSM International Calls
Call the U.S. from another country
1. In standby mode, press and hold
to display the
“+” symbol. The “+” symbol automatically inserts the
exit code for the country from which you are calling.
2. Press
the area code and number.
3. Press . The number is dialed.
Calling Internationally from another country (GSM Only)
to insert the U.S. country code, then enter
1. In standby mode, press and hold
to display the
“+” symbol. The “+” symbol automatically inserts the
exit code for the country from which you are calling.
2. Enter the country code of the person you are calling.
3. Enter the area code, without the leading zero, followed
by the number of the person you are calling. Please note
there are some exceptions for leaving out the leading
zero such as Italy, Finland and Spain.
Phone Modes
Your phone is capable of operating in a number of
countries on both CDMA (Code Division Multiple
Access)andGSM(GlobalSystemsforMobile)networks.
While in the United States or on other CDMA roaming
networks,useyourphoneinVerizon(CDMA)mode.Use
your phone in Int’l (GSM) mode while in countries
Section 3: Call Functions
35
servicedbyGSMnetwork.Foracompletelistofcountries,
please visit www.verizonwireless.com.
Note: When your phone is in Verizon (CDMA) mode, it does not necessarily
mean that you are on the Verizon Wireless Network. You may roam on
certain other carriers’ CDMA networks domestically and internationally
when your phone is in Verizon (CDMA) mode. For more information, see
www.verizonwireless.com.
1. With the slider down, tap Start and tap Settings.
2. The Personal tab is highlighted. Tap Service Mode. The
following options appear in the display.
• Int’l GSM
• VZW CDMA
3. Tap desired mode of operation, then press OK. A
dialogue box appears in the display asking if you wish to
reset modes.
4. Type Yes to confirm and press OK. Tap Cancel to return
to the previous screen.
5. If you pressed OK, the phone restarts and powers up in
the selected mode of operation.
Place a Call Using the Keypad
1. Extend the slider up, then enter the number using the
keypad.
2. Press
. The number is dialed.
One-handed Dialing
Onehandeddialingallowsyoutomakeacallwhileusing
just one hand. To make a call:
1. Press the Contacts
button.
36
Answering a Call
2. Use the up or down navigation key to select the contact
entry you want to dial, then press
.
Note: If you press and hold the OK/Navigation key down, letters are
displayed that will automatically display the first entry beginning with that
letter.
3. Use the up or down navigation key to select the number
you want to dial, then press
number in the phone screen.
to display the
4. Press
again to dial the number.
Answering a Call
Make sure that the phone is turned on.
■ When you receive an incoming call, the Phone Incoming
screen is displayed. Tap Answer or the
soft key,
press the Send key to answer the call, or tap Ignore
to let the call go to voicemail.
Note: When you receive a call, you can silence the ringer by pressing the
volume key on the side of your phone.
Using the Speakerphone
Thespeakerphoneallowsyoutospeaktootherswithout
the need to hold the phone to your ear.
1. While in a call, press and hold
speakerphone. The speakerphone icon
the top of the screen.
to activate the
appears in
2. To deactivate the speakerphone, press and hold
again.
Section 3: Call Functions
37
Display Your Phone Number
1. Tap Start, then select Phone from the drop down menu.
2. Tap Tools, then select Options.
3. The Settings screen displays with your phone number at
the top of the screen.
4. Tap
to exit.
Call History
When a call is received, made, or missed a record of the
call is saved with all the available information in Call
History. The Call History logs are:
• All Calls - Displays all calls, missed, outgoing, incoming and by
caller.
• Missed - Displays any missed calls.
• Outgoing - Displays all outgoing calls made from your phone.
• Incoming - Displays all the incoming comes that were
answered.
• By Caller - Allows you to select an entry from the contacts and
then displays any call information related to the contact.
Ifyoutaptheentry,thetime, date, anddurationofthecall
appears in the display.
To access the Call History menu, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Phone from the drop down menu.
3. Tap
to display the Call History menu.
Place a Call Using Call History
1. From the phone screen, tap
38
.
Call History
2. Tap the drop down arrow in the upper left corner and
select the desired call log list.
3. Tap the phone icon located to the left of the entry to
make a call.
4. When finished, tap
.
Call History Options
Call log options allows you to view the call times for all
calls and recent calls. You can also set the amount of time
tokeepcalllogitemsbeforetheyaredeleted.Toaccessthe
call log options:
1. From the phone screen, tap
.
2. Tap Tools and select Call Timers.
3. Tap the drop down arrow under Delete call history
items older than and select the option you want.
4. Tap
to exit.
Create a Contact Using Call History
1. From the phone screen, tap
.
2. Tap the drop down arrow in the upper left corner and
select the desired call history list.
3. Tap and hold on the desired entry. Select Save to
Contacts from the menu.
4. Enter the contact information.
5. When finished, tap
.
Deleting Call History Entries
To delete call history entries:
Section 3: Call Functions
39
1. From the phone screen, tap
.
2. Tap the drop down arrow and select the desired call
history list you want.
3. To delete a call from the list, tap and hold the entry you
want to delete, then tap Delete from the pop-up menu.
4. Tap Yes to confirm the deletion, then tap
to exit.
5. To delete all calls in the call list, tap Tools and select
Delete all calls.
6. Tap Yes to confirm the deletion.
7. Tap
to exit and return to the phone screen.
Note: To delete all call history entries, select All Calls.
Send Message using Call History
TextmessagescanbesenttootherusersthatsupportSMS
capabilities.
Note: Contact your service provider for more information on SMS
messaging services.
To send a new text message from a call history entry:
1. From the phone screen, tap
.
2. Tap the drop down arrow and select the desired call log
list.
3. Tap and hold on the desired entry. Select Send Text
Message from the menu.
4. Enter the subject and message, and tap Send when
finished.
40
Roaming
Roaming
What is Roaming
Yourphonecanroamonotherdigitalnetworks.Roaming
occurs when you travel outside a pre-designated
coverage area. The roaming icon appears on when in
roaming is active, and extra charges may apply when
making or receiving a call.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
charges.
Roaming Options
The following roaming options are available:
• Home only - Your phone is available for normal operation only in
the designated coverage area.
• Automatic-A - The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital “A”
system is acquired.
• Automatic-B - The preferred roaming list is used to acquire
service. If no preferred systems are found, any digital “B”
system is acquired.
Note: Contact your service provider for information regarding preferred
systems.
To change your Roaming option, follow these steps:
1. Tap Start, then select Phone from the drop down menu.
2. Tap Tools, then select Options. The Settings screen is
displayed.
Section 3: Call Functions
41
3. Tap the Service tab, then select the Roaming option you
want from the drop down menu.
TTY
Your i830 is fully TTY compatible, and it allows you to
connect TTY equipment to the phone’s headset jack.
However, before you can use a TTY device, you need to
enable TTY functions using these steps:
1. Tap
,
,
,
,
.
2. Choose from the following options:
• TTY On
• TTY Off
3. Tap your selection and tap Save to exit and return to the
Phone screen.
Note: If TTY is enabled, you can attach Telecommunucation Devices for the
Deaf to the handset.
VoiceSignal
VoiceSignalisadvancedspeechrecognitionsoftwarethat
canbeusedtoactivateawide-varietyoffunctionsonyour
Pocket PC. VoiceSignal software automatically voice
activatesallnumbersinyourContactsforvoicedialingor
searching, and no pre-recording or training is needed.
VoiceSignal commands allow you to dial numbers,
lookupcontactinformation, andopenapplicationsusing
your voice. Simply say a command at the prompt to open
your contacts, launcher, the Picsel Browser, and more.
1. Tap Start, then select Programs from the drop down
42
VoiceSignal
menu. Tap VoiceSignal.
2. After a brief pause, “Say a Command” appears in the
display and is announced through the speaker.
3. After the phone beeps, say the name of the command
that you want to perform. The VoiceSignal commands
are:
• Call: Lets you dial a phone number by saying a name saved in
your contact list or by saying the digits in the telephone
number.
• Lookup: Lets you retrieve contact information for any entry in
your contacts list.
• Open: This provides you with one-step access to many of your
phone’s applications such as Calendar.
The following sections provide more information about
the VoiceSignal commands.
Call a Name or Number
The Call command lets you dial a person by saying the
name you’ve stored for that person in your contact list or
bysayingthetelephonenumber’sdigits,evenifyouhave
not saved the number in contacts.
Voice Dialing Tips
• Voice dialing works best in quieter environments.
• When pronouncing a name or number, speak at a normal
speed, and there is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). It doesn’t recognize
numbers such as “one eight hundred” for “1-800.” Instead,
say “one eight zero zero,” or “one eight oh oh.”
Section 3: Call Functions
43
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the digit “1.”
• If you are experiencing frequent problems with Voice Dial
recognizing your commands, try adapting it to your voice,
which greatly improves its accuracy. See "Adapting Digits" on
page 45 for more information.
Dialing a Name
1. Tap Start, then select Programs from the drop down
menu. Tap VoiceSignal.
“Say a Command” appears in the display and is
announced through the speaker.
2. Say “Call.”
The phone prompts, “Say the name or number.”
3. Say the full name of the person you want to call, exactly
as it is entered in your Phonebook.
The phone may display one or more names on the
screen and prompts “Did you say?”
4. To confirm the name you spoke, wait for the beep and
then say “Yes” or choose the correct name from the
choice list using your navigation key.
Note: If the name that you pronounced has more than one associated
number, the phone displays the different locations (such as “home” or
“work”) and prompts you, “Which number?” In this case, pronounce the
location that you want to call. The phone dials the number.
5. The phone repeats what you said and then prompts,
“Connecting” and dials the number.
44
VoiceSignal
Digit Dialing
1. Tap Start, then select Programs from the drop down
menu. Tap VoiceSignal.
“Say a Command” appears in the display and is
announced through the speaker.
2. Say “Call.”
The phone prompts, “Say the name or number.”
3. Pronounce the number naturally and clearly.
The phone may display one or more names on the
screen and prompts “Did you say?”
4. To confirm the number you spoke, wait for the beep and
then say “Yes” or choose the correct name from the
choice list using your navigation key.
5. The phone dials the number.
Adapting Digits
Voice dialing works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may receive better results
after adapting the system to match their voices.
Note: You should adapt Digit Dial only if the system is frequently unable to
recognize your speech. After you adapt Digit Dial, your phone is
customized to your voice, and your voice only. Others will not be able to
use it unless they reset the phone to factory defaults.
Adaptationinvolvesrecordingseveraldigitsequencesto
adapt the system to the unique properties of your voice.
The adaptation process takes about three minutes.
Section 3: Call Functions
45
Tips for Adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, re-
record that sequence.
• Only adapt digits if you regularly have problems with digit
dialing. Once adapted, digit dialing will not work as well for
other people using your phone.
Adapt Digit Dial to Your Voice
1. Tap Start, then select Programs from the drop down
menu. Tap VoiceSignal.
2. Tap Settings.
3. Tap Digit Dialing.
4. Tap Adapt Digits.
5. Read the description until you are comfortable to
proceed, then tap OK.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
6. Wait for the beep and repeat the digits using your normal
tone of voice.
7. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
46
VoiceSignal
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
8. After confirming that a recording sounds ok, repeat the
recording process with the next set of digits until all
sequences have been completed.
9. After the final sequence, the phone prompts “Adaptation
complete.”
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. Tap Start, then select Programs from the drop down
menu. Tap VoiceSignal.
2. Tap Settings.
Note: Reset Digits is only available if you have adapted digit dial for your
voice.
3. Tap Digit Dialing. Tap Reset Digits.
4. When the confirmation screen displays, tap OK to
proceed, or tap Back to cancel.
5. If you tap OK, then the message “Digit Adaptation
Reset” displays.
Looking up Contacts
UsetheLookupcommandtolookupcontactinformation
for any person stored in your Contacts list.
1. Tap Start, then select Programs from the drop down
Section 3: Call Functions
47
menu. Tap VoiceSignal.
The phone prompts, “Say a command.”
2. Say “Lookup” followed by the name of a person in your
Contacts list.
After you say a name, you may be prompted, “Did you
say?” followed by the first of up to three names. To
confirm a name, wait for the beep and then say “Yes.”
If there is no match found, the phone responds with
“Sorry, no match found.”
Opening Applications
TheOpencommandallowsyoutoopenanapplicationor
to quickly access several menus on your phone.
1. Tap Start, then select Programs from the drop down
menu. Tap VoiceSignal.
The phone prompts, “Say a Command.”
2. Say “Open” followed by the application or menu item you
want.
For example, say, “Open Contacts.” The Contacts screen
is displayed.
Note: To see a list of applications or menu items, say “Open” but do not
specify a destination. Your phone displays available options and prompts
“Please Choose.” Say “Next Menu” to scroll through other available
choices applications and menu choices.
48
Section 4: Menu Navigation
Topics Covered
• Navigating your PDA
• Menu Types
• Launcher
• Task Manager
This section explains the menu navigation for your
phone. It also includes a description of the Launcher and
Task Manager applications included with your Samsung
SCH-i830.
Section 4: Menu Navigation
49
Navigating Your PDA
Your i830 provides the power of a personal computer
with exceptional portability and integration. Unlocking
its power begins with customizing the i830 so that it
becomes an extension of your desktop or laptop
computer.
The i830 is powered by Windows Mobile 2003 Software
for Pocket PC Phone Edition, providing the power and
familiarity of Microsoft Windows. Pocket versions of
popular Microsoft applications such as Word, Excel,
Windows Media Player® and Outlook® eliminate the
need to learn new software.
Menu Types
There are two menus available in the i830 menu options.
They include the following:
• Start Menu
• New Menu
TheStartmenucontainslinks
to all the applications and
settings information, similar
to a Windows based PC
system. To access the Start
menu,simplyusethestylusto
tap in the upper left corner of
the screen on the word Start.
A menu list is displayed, and
from this pull down type
menu, all other applications
and settings can be accessed.
50
Menu Types
The New menu options
allowyoutoconfigurewhat
is displayed when you tap
on theNew menu located in
the bottom left corner of the
screen.
Both the Start and New
menus can be modified to
display some or all of their
options. To access and
change these menus, follow
the steps below.
Start Menu
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Menus icon. The Start Menu tab displays.
4. Check the items that you want displayed in the Start
menu. Items that are not checked are displayed in the
Programs menu.
5. Press
to save your settings and exit.
New Menu
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap the Menus icon, then tap the New Menu tab.
4. Check the items that you want to be displayed in the
New menu.
5. Press
to save your settings and exit.
Section 4: Menu Navigation
51
Launcher
The Launcherapplication is a
task and file launcher with
great additional features.
Programs, games, utilities,
and files can all be launched
from customized pop-up
windowsusingyourstylusor
functionkeyslocatedonyour
i830.
Opening Launcher
You can open the Launcher
application two ways. Either press the
key on the
i830, or follow the steps below to access the application
using menu selection.
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Launcher. The Launcher pop-up window displays.
Launcher Groups
When you open the Launcher application, a Group
window displays. Your phone has the following default
pop-up windows for the Launcher application:
• MITs
• Mobile Office
• Utilities
• Games
• Control Panel
52
Launcher
ExceptfortheControlPanelwindow,eachpop-upcanbe
changedtodeleteorincludeprogramsorfeaturesinyour
phone that you use often or want to group specifically
group together. Additionally, you can add new groups
and customize their windows also.
To display a group or to change from one group to
another, follow these steps:
1. Press
active group used by the application displays.
2. To change to a different group, tap to display the
to display the group after the
to open the Launcher application. The last
group before, or tap
currently displayed pop up window.
3. You can also tap the title bar the current pop-up window
to display a drop down that lists all groups, and then
select the group you want from the list.
4. After your selection, the program or function you chose is
displayed and the Launcher window closes.
Launcher Configuration
You can customize each pop-up window available in the
Launcher application. You can add your own user
defined pop-up lists or move functions and features
between the groups that are already defined.
To display the Launcher Configuration console, follow
these steps:
1. Press
to open the Launcher application. The last
active group used by the application displays.
2. Tap
window.
located at the bottom of the Launcher
Section 4: Menu Navigation
53
Adding and Deleting Launcher Groups
To add a group that displays as a pop-up window when
Launcher opens, follow these steps.
1. Press
active group used by the application displays.
2. Tap located at the bottom of the Launcher
window.
to open the Launcher application. The last
3. Highlight any group in the Group panel on the
configuration screen.
4. Tap New, then enter the name of the new group. The
name you choose can have a maximum of 25 characters.
5. Tap OK. The name of the new group displays in the
Group panel at the bottom of the list.
Note: To move a group either up or down in the list, highlight the Group
name and then tap either Up or Down buttons in the Group panel.
Todeleteagroupthatdisplaysasapop-upwindowwhen
Launcher opens, follow these steps.
1. Press
active group used by the application displays.
2. Tap located at the bottom of the Launcher
window.
to open the Launcher application. The last
3. Tap the group you wish to edit. Members of the group are
displayed in the lower portion of the screen.
4. Highlight the members of the group to delete and tap the
Delete key.
54
Launcher
Note: You must delete all members of a group before deleting the group.
5. Highlight the group you want to delete in the Group
panel on the configuration screen.
6. Tap Delete. A confirmation window displays.
7. Tap Yes. The group is deleted and the configuration
screen displays.
Adding and Deleting Functions in a Group
The functions and the features that display in a group
pop-up window when Launcher opens can be moved
betweengroupsordeletedfromanexistinggroup,oryou
canaddfunctions,applications,orfeaturesthatyouuseto
any group you create.
Group must already be defined or added before you can
moveapplicationstothem.Ifyouneedinformationabout
adding a group to Launcher, see the section above
“Adding and Deleting Launcher Groups.”
Once a group is setup in Launcher, you can follow these
stepstoaddanapplicationorotherfunctiontothepop-up
window.
1. Press
active group used by the application displays.
2. Tap located at the bottom of the Launcher
window.
to open the Launcher application. The last
3. Highlight the group you want to add a function to in the
Group panel on the configuration screen.
Section 4: Menu Navigation
55
The name of the group that you highlight appears above
the lower panel on the configuration screen, as well as
any applications or other functions already stored in the
group.
4. To add a new application or other feature to the group,
tap New.
The Select a Program screen displays and is similar to
the File Manager function. Use the menu tree to navigate
to the folder that contains the application or feature you
want add.
Once you select the folder that contains the target
function, a list of programs or link files display in the
bottom portion of the Select a Program screen.
Note: If you select a folder that does not contain either executable or link
files (i.e., .exe or .lnk), then the bottom pane of the screen remains empty.
5. Select the program or link you want, then tap
. The
Edit display name screen displays with the default
name of the program in the Name field.
6. Change the name of your selection, if desired, and tap
OK. The Configuration screen displays and the
application, folder, or feature you selected appears in the
list.
7. Repeat Steps 4 through 6 until you have added all of the
features you want in the group, then tap
. The Today
screen displays and last active Launcher window
displays.
56
Launcher
8. To view the group you made change to, navigate to the
group window you want. For information on selecting a
different group in Launcher, see "Launcher Groups" on
To delete a function from a group in Launcher, follow
these steps.
1. Press
active group used by the application displays.
2. Tap located at the bottom of the Launcher
window.
to open the Launcher application. The last
3. Highlight the group you want to delete a function from in
the Group panel on the configuration screen.
The name of the group you highlight appears above the
lower panel on the configuration screen, as well as any
applications or other functions already stored in the
group.
4. To delete an application or other function associated with
the group, highlight the function you want to delete, then
tap Delete. A confirmation screen displays.
5. Tap Yes to confirm. The Configuration screen displays
and the function you deleted is removed from the group.
Note: Deleting an application or function from a group in Launcher does
not delete the feature from your Pocket PC. You are removing a shortcut in
Launcher and not deleting the program from your Pocket PC.
Moving Functions Between Groups
To move an application or another function from one
group to another, follow these steps.
Section 4: Menu Navigation
57
1. Press
active group used by the application displays.
2. Tap located at the bottom of the Launcher
window.
to open the Launcher application. The last
3. Highlight the group in the Group panel that contains the
application or function you want to move.
The name of the group you highlight appears above the
lower panel on the configuration screen, as well as any
applications or other functions already stored in the
group.
4. Highlight the application or other function you want to
move, and then tap Move. The Move to group screen
displays.
5. Highlight the group where you want to move the
application or function you selected, then tap
. The
Configuration screen displays and the application or
function is moved.
Task Manager
The Task Manager is an application that shows the
programs that you are currently running as icons so you
can quickly select or close them.
To open the Task Manager, follow these steps:
1. Press and hold the Launcher
key. The Task
Manager bar displays.
2. Use the right or left navigation keys to highlight the
program you want.
58
Task Manager
3. Tap
screen.
to select the program and display it on your
Section 4: Menu Navigation
59
60
Section 5: Entering Text
Topics Covered
• Built-in QWERTY Keyboard
• Selecting Text Input Mode
• Word Completion
• Text Entering Options
This section outlines how to select the desired text input
modewhenenteringcharactersintoyourSamsungSCH-
i830. This section also describes the predictive text entry
systemthatreducestheamountofkeystrokesassociated
with entering text.
Section 5: Entering Text
61
Built-in QWERTY Keypad
Your i830 has a built-in standard typing keypad,
commonly calledQWERTY, which can beaccessed when
you extend the slide to it up position. Using this keypad,
you can type letters, punctuation, numbers, and other
special characters into text entry fields or other
applications available on your Pocket PC.
Selecting Text Input Mode
There are five different character input methods
available. They are:
• Built-in QWERTY keyboard
• Block Recognizer
• Keyboard
• Letter Recognizer
• Transcriber
Each of these methods allow you to input alphanumeric
characters and symbols into the i830. In addition to the
input methods, there is Word Completion and other
options associated with the input selected.
To access the Input settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap the Input icon.
62
Selecting Text Input Mode
Block Recognizer
This input method uses the traditional writing area box
splitinthemiddle.Theleftsideisusedtowritelettersand
the right side is for number entry. Symbols and common
functionsare located in othersmallerboxes located to the
right of the writing box area. There are no options
associated with this type of input method.
Keyboard
This input method displays an on-screen keyboard that
can be used to input characters by tapping the screen
using the stylus. The keyboard entry method has the
following options:
• Large keys
• Small keys
• Use gestures for the following keys
Toselectlargerorsmallerkeys,simplytapthebuttonnext
to the desired option.
The gestures feature allows you to replace keys used on
the keyboard for space, backspace, shift+key, and enter
by drawing a gesture or motion. The large key option
must be selected for this option to be available.
Letter Recognizer
This option allows you to enter text using your own
handwriting. The screen is divided into three different
areas.Acapitalletterarea,smallletterarea,andanumber
area. Characters are entered by printing letters in each
area. The character is then analyzed and typed on the
Section 5: Entering Text
63
screen automatically. The following options are
associated with this method:
• Quick stroke
• Right to left crossbar
• Allow accented characters
Transcriber
The transcriber option is similar to the letter recognizer,
except instead of entering characters into a designated
area,youcanenterentirewordsandsentencesusingyour
own handwriting. Transcriber supports both printing
and cursive writing styles and then automatically types
the information on the screen. The following general
options are associated with this method:
• Sound On - Turns the sound On or Off.
• Show into screen - Displays the help or introduction screen
whenever the transcriber option is selected.
• Show icon bar - Displays the icon bar.
• Inking Color - Allows you to select the color and size of the
stroke line.
There are also some transcriber recognizer options. They
are:
• Add space after - Automatically adds a space after each writing.
• Separate letters mode
• Speed of recognition vs. Quality - Determines the speed at
which the writing sample is analyzed. The faster the setting the
less likely to get all words correct. Better quality is achieved
with longer processing.
64
Word Completion
• Recognition start time - Allows you to set the time of recognition
between new writings.
Word Completion
Word completion settings determine if words
automatically display after entering a defined number of
characters on the screen. The following options are
available:
• Suggest words when entering text
• Suggest after entering (1-7) letter(s).
• Suggest (1-4) word(s).
• Add a space after suggested word.
• Replace text as you type.
To access the Word Completion settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab, and then tap the Input icon.
4. Tap Word Completion tab.
5. Select the number of letters or words by tapping the drop
down arrow associated with each option.
6. Tap
to save and exit.
Text Entering Options
Note: The options settings only apply when writing or recording is
supported.
In the options tab, you can select:
Section 5: Entering Text
65
• Voice recording format
• Default zoom level for writing
• Default zoom level for typing
• Capitalize first letter of sentence
• Scroll upon reaching the last line
To access the Options settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab, and then tap the Input icon.
4. Tap the Options tab.
5. Select or tap the drop down arrow associated with each
option.
6. Tap
to save and exit.
66
Section 6: Contacts
Topics Covered
• Understanding Your Contacts
• Adding Notes to Contacts
• Speed Dialing Contacts
• SIM Manager
Thissectiondescribeshowtomanageyourdailycontacts
by storing someone’s name and number in your
phonebook. These entries can then be sorted by name,
entry, or group.
Section 6: Contacts
67
Understanding Your Contacts
The Contacts feature is used to save important
information regarding your friends, colleagues, or
businessacquaintances.Thecontactsscreenallowsyouto
save the person’s:
•
•
•
•
•
Name
•
•
•
•
•
Assistant Telephone
Birthday
Job Title
Department
Company
Anniversary
Spouse
Work Telephone, Fax &
Address
Children
•
•
•
•
•
•
•
•
•
•
•
•
•
•
68
E-mail
Mobile Telephone
Web page
Office Location
Home Telephone & Address
Categories
Other Addresses
Pager
Car Telephone
Home Fax
Work2 & Home2 Telephone
Radio Telephone
E-mail2 & E-mail3
Assistant
Understanding Your Contacts
In addition to the information available in contacts, you
canalsorecordorwriteanoteassociatedwiththecontact.
All of this information can be synchronized with a PC or
Laptop using the Microsoft ActiveSync application. See
"ActiveSync®" on page 152 for more information.
Add a New Contact
1. Tap Start located in the upper left corner of the screen
and select Contacts.
Note: You can also press the Contacts button
located in the front on
the lower right corner of the i830.
2. Tap New.
3. Enter the desired information in the spaces provided.
When finished, tap
.
Find a Contact
To locate a specific contact, you can use the find feature.
Findallowsyoutoenterthefirstfewlettersofthecontact
entry and then have the results displayed on the screen.
The Find box is located in the upper right corner of the
contact screen. To find a contact:
1. Press
to open Contacts.
2. Tap the Find a name box and enter the first few letters
of the desired entry.
3. Tap the entry from the list of possible matches to view
the summary screen
4. If the entry is not the one your looking for, tap
to
return to the list of possible matches.
Section 6: Contacts
69
Edit a Contact
1. Press
to open Contacts.
2. Locate the desired contact using find or scrolling through
the contact list with the navigation key.
3. Tap the desired contact to view the summary screen.
4. Tap Edit.
5. Change or update the desired information.
6. Tap
to save and exit.
Delete a Contact
To delete a contact:
1. Press
to open Contacts.
2. Use the navigation key to highlight the contact you want
to delete.
3. Tap Tools and select Delete Contact.
4. Tap Yes to confirm the deletion.
Make a Call from Contacts
To make a call from the contacts screen:
1. Press
to open Contacts.
2. Tap the desired contact from the list.
3. From the summary screen, tap the phone number.
4. The call is dialed automatically. To end the call, tap the
End button on the Phone Connected screen.
Note: If you tapped Hide, you can display the phone main screen by
tapping the signal strength icon in the top right of the screen.
70
Understanding Your Contacts
Beam a Contact via IR
Your i830 is equipped with an infrared port (IR) which
allows you to send and receive information wirelessly
between two IR Pocket PC devices. To beam a contact:
1. Press
to open Contacts.
2. Tap the desired contact from the list to view the
summary screen.
3. Tap Tools and select Beam Contacts.
4. Align the ports between the two devices.
5. When the contact has been successfully transferred, tap
to exit.
Beam Contacts via IR without Confirmation
You can send and receive many contacts via IR without a
confirmation message. To beam many contacts at once,
follow these steps:
1. For the device that will receive the contacts, tap Start
and then select Settings.
2. Tap Connections and select Beam.
3. Tap Receive all incoming beams, which sets the
device to Beam Receive mode.
4. For the device sending the contact information, press
the Contact button to open Contacts.
5. Select the contacts from the list by dragging your pointer
across the entries you want.
6. Tap Tools and select Beam Contacts.
Section 6: Contacts
71
7. Align the IR ports between the two devices.
8. When the contacts have been successfully transferred,
tap
to exit.
Adding Notes to Contacts
Notes allow you to record or write a note that is attached
and saved with the contact entry. When you view the
summary screen on the contact, you can view or listen to
any notes that are associated with the contact.
Adding a Note
1. Press
to open Contacts.
2. Tap the desired contact from the list.
3. Tap the Notes tab.
4. To record a note, tap record icon
located in the
command bar. Tap
Tap when finished.
to begin the voice recording.
5. To write a note, tap the pen icon
and enter the note
using the desired entry method.
6. To exit and save, tap
Deleting a Note
.
To delete a note:
1. Press
to open Contacts.
2. Tap the desired contact from the list.
3. Tap the Notes tab.
4. Tap Edit and select Select All.
72
Speed Dial Contacts
5. Tap Edit and select Clear.
6. To exit and save, tap
.
Speed Dial Contacts
Speeddial can beused to thedial contacts that you talk to
the most. Speeddialallowsyou to press either oneor two
keys to dial to the contact. Memory locations 2-99 are
available for speed dialing. To speed dial:
1. Tap Start located in the upper left corner of the screen.
2. Tap Phone, and then tap
.
3. Tap New in the bottom left corner of the screen.
4. Tap the contact that you want to add to Speed Dial.
5. Tap the up or down arrows next to Location to select the
desired memory location.
6. Tap
to save.
7. To exit the contact summary screen, tap
again.
SIM Manager (GSM Mode)
The SIM Manger allows the input and editing of
information into you Phone Book, SMS Inbox, and the
displayofyourownnumberandanyadditionalnumbers
yousave. TherearetwowaystoaccesstheSIMManager-
fromtheProgramsmenuoptionorwhileinContactsthen
tapping the Tools tab.
SIM PhoneBook
To access the SIM PhoneBook use the following
procedures.
1. Tap Start located in the upper left corner of the screen
Section 6: Contacts
73
and select Contacts.
2. Tap Tools located on the bottom of the screen.
3. Tap SIM Manager the SIM PhoneBook displays.
Add a PhoneBook Entry
1. Tap Start located in the upper left corner of the screen
and select Contacts.
2. Tap Tools located on the bottom of the screen.
3. Tap SIM Manager the SIM PhoneBook displays.
4. Tap New located in the lower left corner of the screen.
5. Enter the Name, Phone Number, and Index number to
be associated with this entry. Tap
.
Move or Copy to Contacts
To move or copy your SIMPhoneBookentrytoContacts,
use the following steps:
1. Tap Start located in the upper left corner of the screen
and select Contacts.
2. Tap Tools located on the bottom of the screen.
3. Tap SIM Manager the SIM PhoneBook displays.
4. Place a checkmark next to the entry you wish to move or
copy. Tap Tools. Highlight Copy to Contacts or Move
to Contacts.
5. Tap OK or Cancel. A SIM Manager pop-up displays, tap
OK to complete move or copy.
Note: The SIM PhoneBook provides 3-default fields (Name, Phone Number,
and Index). This information is stored on your SIM card to provide
information mobility. When PhoneBook entries are moved or copied to
74
SIM Manager (GSM Mode)
Contacts, all input fields are available for entry, however this information is
not stored on the SIM card.
Delete SIM PhoneBook Entry
To delete a Phone Book entry from the SIM Phone Book,
use the following steps:
1. Tap Start located in the upper left corner of the screen
and select Contacts.
2. Tap Tools located on the bottom of the screen.
3. Tap SIM Manager the SIM PhoneBook displays.
4. Place a checkmark next to the entry you wish to delete.
Tap Tools. Highlight Delete.
5. A SIM Manager pop-up displays, tap Yes to delete or No
to cancel.
Delete All SIM PhoneBook Entry
To delete all SIM PhoneBook entries, use the following
steps:
1. Tap Start located in the upper left corner of the screen
and select Contacts.
2. Tap Tools located on the bottom of the screen.
3. Tap SIM Manager the SIM PhoneBook displays.
4. Tap Tools and tap Select All. Tap Tools. Highlight
Delete.
5. A SIM Manager pop-up displays, tap Yes to delete or No
to cancel.
Section 6: Contacts
75
SIM SMS
SIMSMSstoresupto15sentorreceivedSMSmessageson
SIM Own Number
TheSIMOwnNumberoptionprovidestheabilitytostore
phone numbers that are used with this SIM card. If you
have more than one phone that uses the same SIM card,
this information may be stored here.
76
Section 7: Messaging
Topics Covered
• Types of Messages
• Messaging Inbox
• Text Messages
• About E-mail Setup
• E-mail Using Outlook
• E-mail Using ISP
Thissectiondiscussesthetypesofmessagesyoucansend
andreceive,howtosetupyourphonetoworkwithemail,
and how to send email messages using different types of
connections.
Section 7: Messaging
77
Types of Messages
The i830 is capable of sending E-mail and text messages.
Send text messages by simply enteringthephonenumber
of the recipient when creating a new message.
Messaging
All incoming messages arrive and are stored in the Inbox
until deleted. If memory is full, new messages are
rejected, so you should delete older messages to free up
space for new messages. The Inbox has three sub menus
at the bottom of the screen labeled, which are New, Tools,
and Accounts. The following sections cover each of these
sub menus in more detail.
New
UsetheNewsubmenutocomposeandsendanewE-mail
or text message. Send a text message by entering the
phone number of the message recipient in the To field, or
send an E-mail by entering their E-mail address.
Whichever method you use to send a message (E-mail or
text), you’ll need to set up an account, which is discussed
later in this section.
Note: Text messages can only be sent to compatible phones and devices.
To compose a new message, follow these steps:
1. Tap Start, then tap Messaging.
2. Tap New at the bottom of the screen.
3. Tap the To field, then enter the E-mail address or phone
number of your recipient.
78
Messaging
4. Tap the Subj field, then enter a subject for your
message.
5. Below the Subj field is a large box. Tap your stylus in this
area, then begin composing your message using the
preferred method of text entry.
Note: Tap the up arrow next to the keyboard symbol at the bottom right of
the screen to choose your method of text entry.
6. Once you’ve finished composing your message, tap
Send, which is located next to the To and Subj fields.
Tools
The Tools sub menu allows you to view your message
folders, empty deleted items from your Deleted Items
folder, edit My Text Messages (pre-composed messages),
checkthestatusofmessages,andsetoptionssuchasreply
format and others.
1. Tap Start, then tap Messaging.
2. Tap Tools at the bottom of the screen. A pop-up menu
appears in the display with the options listed below:
• Manage Folders: Allows you to create, rename, or delete a
folder.
• Empty Deleted Items: Empty any messages in your
Deleted Items folder.
• Edit My Text: Edit any of the canned (pre-composed)
messages that came with your phone.
• Status: Check the status of messages.
• Options: Set options such as reply format and more.
Section 7: Messaging
79
3. Tap on any of the options to open the folder and perform
the functions listed in the previous table or to view the
folder’s contents.
Accounts
Set up accounts for each method that you want to use for
sending messages. Accounts are necessary for sending
text and E-mail messages, whether using your ISP or
ActiveSync.
1. Tap Start, then tap Messaging.
2. Tap Accounts at the bottom of the screen. A pop-up
menu appears in the display with the options listed
below:
Note: The Clear ActiveSync or Clear SMS options do not display together
but depend on the type of session selected.
• Connect: Connect to your service provider.
• Clear Text Messages: Clear scheduled SMS sessions.
• New Account: Set up a new account for sending messages.
• Accounts: View your current accounts, or set up a new
account.
• Text Messages: Select the SMS account for sending
messages.
• Outlook E-Mail: Select the Outlook account for sending
messages.
3. Tap on the options you want and then perform the
functions listed or view the folder’s contents.
80
Text Messages
Text Messages
You can send and receive text messages with other users
that have SMS (Short Message Service) capability. Text
messaging, or SMS messaging, can be sent from one
device to another by addressing a message to the
recipient's phone number.
Create and Send a Text Message
1. Tap Start, then tap Messaging.
2. Tap New.
3. Enter the phone number(s) of up to ten recipient(s) in the
To field. Place a semicolon between numbers, if there is
more than one.
Note: To select a number from contacts, tap
screen and select from your list of contacts.
at the bottom of the
4. Tap the Subj field and enter a title for the message.
5. Tap the message area and enter a message using the
desired method of input. When finished, tap the double
drop down arrows to the right of the Subj field.
6. Tap the drop down arrow next to Account and make
sure that Text Messages is selected.
7. If you would like a delivery confirmation, then tap Tools
and select Options. Tap the check box next to Request
message delivery notification.
Section 7: Messaging
81
8. Tap Send to send the message.
Note: There is a 160-character limit for text messages. The limit applies to
messages sent using Text Messaging only. If you send a text message with
more than 160 characters, the message truncates after the first 160
characters. Remaining characters are sent in separate messages until all
characters have been sent. Charges apply in accordance with the sender's
and the recipient's calling plans.
My Text Messages
My Text Messages consist of 9 pre-composed text
messagesthatyoucanusequicklytosendreplieswithout
having to type a message. The default messages are:
• Yes.
• No.
• Thanks.
• Please call my mobile.
• Please call my assistant.
• I’ll be right there.
• I’m running late.
• I’ll get back to you.
• I love my Pocket PC!
Using My Text Messages
1. Create a new text message.
2. Tap My Text and select the desired message from the
list.
3. Tap Send to send the message.
82
Text Messages
Cancel a Message
■ From the new message screen, tap Edit and select Cancel
Message.
Message Tools
Several message features are available under Tools when
sending a Text message.
• Spell Check: Spell check your message.
• Check Names: Check contacts for the name of the recipient.
• Edit My Text: Edit the pre-composed text messages or create
your own unique messages.
• Language: Select the character set used for your message.
• Options: Select the checkbox to request a message delivery
notification for this message.
Spell Check a Message
1. Create a new text message.
2. Tap Tools and select Spell Check.
3. When the spell check is finished, tap
.
4. Tap Send to send the message.
Check Names
1. Create a new text message.
2. Tap Tools and select Check Names.
3. Tap
to return to your message.
Section 7: Messaging
83
Edit My Text Messages
To edit My Text Messages, follow these steps:
1. Open a text message.
2. Tap Tools and select Edit My Text.
3. Select the message that you want to edit.
4. Delete the old message from the box and enter a new
message.
5. Tap
to save and exit.
Text Message Folders
There are five message folders in the Text directory. The
foldersandtheirfunctionsaresimilartothefoldersinthe
ActiveSync directory, except for Outbox. In ActiveSync,
E-mail is stored in the Outbox until you perform an
ActiveSync with your PC. In Text Messages, new
messages are stored in the Outbox folder until message
sending is complete. The following is a list of Text folders
and their function.
• Deleted Items: Deleted messages are sent to the Deleted Items
folder. Once messages are removed from the Deleted Items
folder, they are permanently erased.
• Drafts: Drafts contain all SMS messages that were not
completed and saved to be sent at a later date.
• Inbox: All incoming SMS messages arrive and are stored in the
Inbox until deleted. If memory is full, new messages are
rejected. Delete older messages to free up space for incoming
messages.
• Outbox: When you send a message, it is stored in the Outbox
message sending is complete.
84
About E-mail Setup
• Sent Items: Sent Items keeps a record of all sent messages
from your device.
Access Text Message Folders
1. Tap Start, and then select Messaging.
2. Tap Accounts and then select Text Messages.
3. At the top of your screen is an arrow for a drop-down
menu. Tap this arrow to display a menu tree that lists the
folders for Outlook E-Mail, Text Messages, and any other
accounts you have created.
4. Expand the folders for Text Messages by tapping the +
sign next to Text Messages. Select Inbox to display its
contents.
Note: Tap any of the folders within any of the account trees to view the
folder’s contents.
About E-mail Setup
E-mail can be sent and received using ActiveSync, or you
can also configure the i830 to send E-mail using an ISP
account.
Note: For wireless sync E-mail, refer to Wireless Sync on the
Companion CD included in your Gift Box.
E-mail using Outlook
Install ActiveSync on your PC and set up a Standard
Partnership, so you can send/receive E-mail. See "Setup
a Partnership" on page 153. E-mail is composed off-line
Section 7: Messaging
85
and is sent to the intended recipient(s) the next time you
perform ActiveSync.
1. Tap Start, and then select Messaging.
2. Tap New and enter the E-mail address in the To field.
3. Tap the Subj field and enter a subject.
4. Tap anywhere in the message body field and enter the
content of your E-mail.
5. When you’re finished, tap Send. When you synchronize
your i830 with your PC, the message is sent through your
PC’s E-mail client.
Outlook Message Folders
There are five message folders in the Outlook directory.
Each folder and its related function is listed below:
• Deleted Items: Deleted E-mail is sent to the Deleted Items
folder. Once E-mail are removed from the Deleted Items folder,
they are permanently erased.
• Drafts: Drafts contain all E-mail messages that were not
completed and saved to be sent at a later date.
• Inbox: All incoming E-mail arrives and is stored in the Inbox
until deleted. If memory is full, new messages are rejected.
Delete older messages to free up space for incoming
messages.
• Outbox: When you send an E-mail, it is stored in the Outbox
until you ActiveSync with your PC.
• Sent Items: Sent Items keeps a record of all sent E-mail from
your device. This option must be set by using the Tools/
Options/Message tab. Place a check in the “Keep copy of sent
mail in Sent folder” box.
86
E-mail using an ISP
Access Outlook Message Folders
1. Tap Start in the upper left corner of the screen, then tap
Messaging.
2. Tap the drop down arrow next to Inbox. A directory of
folders for Outlook and Text messages appears in the
display.
3. Tap the + sign to the left of Outlook to display the
Outlook folder hierarchy (if necessary).
4. Tap any of the folders in the Outlook directory to view the
folder’s contents.
E-mail using an ISP
If you’ve configured the i830 to send E-mail using an
Internet Service Provider (ISP), you can send E-mail
directly from the i830 without connecting to your PC
through ActiveSync.
Setup an ISP
Before you can send E-mail directly, you’ll need to
configure the i830 to work through an existing account
withanInternetServiceProvider(ISP)oryournetworkat
work. To configure the i830 to work with an ISP:
1. Tap Start, and the select Settings.
2. Tap the Connections tab.
3. Tap the Connections icon, and select Add a new
modem connection.
4. Enter a name of the connection, and select Cellular Line
under Select a modem, then tap Next.
5. Enter the dial-up number for your ISP, then tap Next.
Section 7: Messaging
87
6. Enter the User name and Password for your account.
7. Tap Domain and enter the domain name for your
account.
8. Tap Finish.
88
Section 8: Changing Your Settings
Topics Covered
• i830 Settings
• Button Settings
• Sound Settings
• Password Settings
• Phone Settings (CDMA)
• Phone Settings (GSM)
This section explains how to either set or change many of
the settings available on your Samsung SCH-i830.
Section 8: Changing Your Settings
89
i830 Settings
The Settings menus for your i830 allow you to configure
or change how many of your phone’s features or
functions appear or work. Some of the settings on these
menus are associated with shortcuts or hotkeys on your
phone and can be quickly accessed for your convenience.
For example, the Today Screen has shortcuts for Owner
Information and Bluetooth connections, while the
Launcher Application, accessed by pressing the
key, displays shortcuts for Power and Screen settings.
Accordingly, some Settings available on the Personal,
System, and Connections tabs are discussed features are
presented in this manual.
Settings that are not easily associated with other
applicationsorfeaturesofyourphonearediscussedhere.
They are not listed in a specific order; however, some
settings are grouped with topics that include them.
Ifyoudon’tseeasettingthatyouarelookingfordiscussed
complete listing of all settings for your phone.
Buttons Settings
The Buttons setting allows you to assign your favorite
programs to your phone’s hardware buttons:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is highlighted.
3. Tap the Buttons icon.
90
Buttons Settings
4. Tap the Button assignment drop down box for each of
the buttons listed below.
5. Tap to save and exit Buttons settings.
Button Assignments
There are four default button settings.
The buttons include:
Button 1 Record
Button 2 Calender
Button 3 Contacts
Button 4 <Context Menu>
The following functions can be assigned to the buttons
above:
• Context Menu
• Input Panel
• None
• Start Menu
• Today
• ActiveSync
• Calculator
• Calendar
• Contacts
• Downloads
• File Explorer
• Find
• OK/Close
• Rotate Screen
• Scroll Down
• Scroll Left
• Scroll Right
• Scroll Up
Section 8: Changing Your Settings
91
• Help
• Pocket Word
• Record
• Internet Explorer
• Jawbreaker
• Launcher
• Remote Control
• Ringtone Manager
• Solitaire
• Messaging
• MSN Messenger
• Notes
• Sprite Backup
• Tasks
• OBEX FTP
• Phone
• Terminal Services Client
• VoiceSignal
• Picsel Browser
• Pictures
• Windows Media
• World Clock
• Pocket Excel
Sound Settings
PDA/Phone Ringer Volume
You can set the volume for both PDA notifications and
phone volume. To adjust these volumes, follow these
steps:
1. Tap the
icon located at
the top of your screen. A
menu displays with sliders to
adjust both the PDA and
phone ringer volumes.
92
Sound Settings
2. Using the stylus, tap the desired level on the slider
located under Volume. The left slider controls the PDA
volume and the right slider controls the ringer volume.
3. Tap the
icon again to exit.
Note: You can also press and hold the slider tab and move it back and
forth along the slider using the stylus.
WOW XT Audio Processing
WOW™ significantly enhances the quality of mono and
stereo audio, creating improved dynamics and bass
performance in your i830 internal speakers or optional
headphoneswhenattached.WOWprovidesapanoramic
three-dimensionalaudioimagethatextendsthesoundin
both the horizontal and vertical planes well beyond the
speakers or headphones themselves. These enriching
effects are especially noticeable on digitally compressed
audio formats such as MP3 and WMA.
WOW is comprised of SRS®, TruBass® and Focus®
technologies, and adds the following features to your
audio listening experience.
• SRS - the leading 3D sound technology in the world, which
restores the spatial information that is masked by traditional
recording and playback techniques.
• TruBass - SRS technology that enhances bass performance by
utilizing psychoacoustic techniques to restore the perception of
low frequency tones, delivering deep rich bass to your i830
internal speakers or optional headphones.
Section 8: Changing Your Settings
93
• Focus - Elevates the sound image field to create the perception
of image height. When used in combination with SRS 3D, it
delivers an enlarged sound image while improving the clarity in
the high frequencies in your audio.
To enable WOW XT audio processing or to change the
settings for this feature, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the System tab.
4. Tap WOW XT Settings.
5. To enable WOW processing, tap the
icon. When
enabled, this icon is red and the other settings can be
changed.
6. Select the Sound EQ mode from Normal, Classic, Jazz,
Rock, Pop, Dance, or Custom.
7. Using the stylus, tap the desired level for each effect you
want to change. You can set:
• SRS 3D Effect – This setting influences the width processing
performed on the audio signal. As you increase this effect, you
should perceive an increasing distance or separation between
the left and right channels.
• SRS Focus – This setting influences the brightness or amount
of treble in the audio signal. Increasing this setting enhances
vocals and dialog.
• SRS TruBass – This setting influences the amount of TruBass
processing performed on your audio signal.
94
Sound Settings
Note: The Sound EQ setting value has changed to allow better sound
effects when an earjack is used. Since buffering is used, changes that are
made using this menu are real time. There can be as much as a one
second delay before you hear a change in the audio you are listening to.
8. To restore the default values, tap the Reset button at the
top of the screen.
9. Tap
to exit.
CarKit Volume
The CarKit Volume determines the volume settings for
voice and PDA ringers when your i830 is attached to the
optional hands-free kit installed in a vehicle.
Volume settings range from Silent to Loud. To set each
option for the optional CarKit, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the System tab.
4. Tap CarKit Volume.
5. Using the stylus, tap the desired level on the slider for
each of the volume settings available.
6. Tap
to save your settings and exit.
Sounds and Notifications
TheSoundsandNotificationssettingsallowsyoutoselect
the actions for which you hear sounds and to customize
how you notified when different events occur.
Section 8: Changing Your Settings
95
To view the sounds and notifications screen, follow these
steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap Sounds & Notifications.
5. Select the check boxes for the events, programs, or
notifications you want to enable on the Sounds tab.
Note: When you enable a sound, your i830 plays tones to notify you that an
events for which you can select sounds.
6. Tap
to exit.
Event Notifications
Event sounds can be set for each of the following events:
• ActiveSync: Begin sync
• ActiveSync: End sync
• Connection disconnected
• Connection established
• Messaging: New e-mail message
• Messaging: New text message
• MSN Messenger: Contact online
• MSN Messenger: New message
• Phone: Incoming call
• Phone: Missed call
96
Sound Settings
• Phone: Voice mail
• Reminders
To set an alert for an event, follow these steps:
1. Tap Start.
2. Tap Settings.
3. Tap the Personal tab.
4. Tap Sounds & Notifications.
5. Tap the Notifications tab.
6. Select the event from the drop down menu.
7. Tap either Play sound or Vibrate.
Note: Use the Phone settings to change the ring type and tone settings of
your phone.
8. Tap the check box next to Play sound to designate a
notification sound for that event.
9. Tap
to exit.
Turn Phone Volume Off
You can turn the ringer off, or you can select one of the
otherRingtoneoptions,suchasVibrate,Vibrateandring,
or Vibrate then ring.
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Personal tab.
3. Tap Phone.
4. Tap the drop down arrow next to Ring type and select
one of the Vibrate options or select None.
Section 8: Changing Your Settings
97
5. Tap
to exit.
Password Setting
The password option allows you to enable or disable a
password. The available settings are:
• Simple 4 digit - Allows you to set a four digit password using
the on-screen keypad.
• Strong alphanumeric - Allows you to enter a password that
contains letters, numbers, or both.
When a password is configured, there is a “prompt if
device unused” option that allows a length of time range
from 0 minute - 24 hours. When this option is set, you can
continue to use the i830 until the screen turns off due to
inactivity. If the device is inactive for a greater amount of
time than specified in this setting, a password must be
entered when you turn the device back on.
To set the password:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Personal tab at the bottom of the display.
4. Tap the Password.
5. Tap the check box next to Prompt if device unused for.
6. Use the drop-down menu to select the amount of time
before you are prompted for a password when the i830
is idle.
7. Select either Simple 4 digit password or Strong
alphanumeric password, depending on your preference.
98
Phone Settings (CDMA)
8. Enter a 4 digit password or alphanumeric password in
the text box next Password.
9. Tap
. You’re prompted to confirm the password
change. Tap Yes to confirm or No to return to the
Settings-Personal screen.
Phone Settings (CDMA)
Phone options are divided into the following tabs:
• Phone - Allows you to configure a voicemail phone number.
View your existing phone number. Select the desired sounds
associated with the phone. Set notification for when Voice
privacy is unavailable.
• Option - Allows you to set Call Control options, Auto Answer
mode, and set how the Time is updated.
• Alert - Allows you to turn on or off the Minute beep, Connect
tone, and Disconnect tone.
• Service - Allows you to set the Data Mode and Roaming
Options. Select the GPS setting and your Voice Privacy level.
• Security - Allows you to restore the factory default settings for
your phone. Set Emergency Call numbers.
• SMS - Allows you to configure the SMS CallBack Number.
Phone Tab
These options allow you to configure several different
settings that are specific to the phone including:
• Changing the Voicemail Dialup Number
• System Sounds
• Keypad Tones
• Voice Privacy Notification
Section 8: Changing Your Settings
99
Voicemail Settings
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon.
4. The number to call your voicemail is displayed in the
Voicemail box. To change the number, tap the box and
enter the number you want.
Note: This number is automatically setup when you receive your phone.
You will probably not need to change it unless otherwise instructed by your
carrier.
Phone Ringer Options
You can select several different phone ringer sounds for
the i830. You can also change the ring type and its tone, as
wellassetanalertforwhenvoiceprivacyisnotavailable.
To access these settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon. The Phone screen displays.
4. Tap the Ring type drop down arrow and select the ring
type you want.
5. Tap the Ring tone drop down arrow and select the ringer
sound you want.
Note: To hear the ring tone, use the player controls located to the right of
the Ring tone drop down box. Tap the arrow to play the tone, tap the square
to stop.
100
Phone Settings (CDMA)
6. Tap the check box next to Notify me when voice
privacy is unavailable if you want to know this.
7. Tap to exit.
Tone Length
When dialing a phone number, tones are emitted each
time a key is tapped. These tones can be modified to be
short, long, oreventurnedoff. Insomecases, longertone
lengths may be necessary to access automated systems
such as voicemail.
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone.
4. Tap the Keypad drop down arrow and select:
• Short Tones - When the QWERTY keypad or the on-screen
keyboard for the phone is tapped, a short tone is played.
• Long Tones - When the QWERTY keypad or the on-screen
keyboard for the phone is tapped, a long tone is played.
• Off - No tones are played when the QWERTY keypad or the on-
screen keyboard is tapped.
5. Tap
to exit.
Option Tab
The option tab allows you to set call control options, the
auto answer mode, and to set how the internal clock is
updated.
• Call Control - Allows you to set up how the phone is answered.
A call can be answered by moving the slider up and can be
ended or released by moving the slider down.
Section 8: Changing Your Settings
101
• Auto Answer - This option can be used with the headset or the
carkit accessory. When using the carkit, the phone is
automatically answered after 3, 5, or 10 seconds.
Note: Auto Answer is not supported for the Bluetooth wireless technology
headset.
• Time Setting - The i830 can receive time information from the
cellular network you use. Select Auto to receive the time signal
from your phone’s carrier or select Manual to set your phone’s
time manually.
To access the option settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon.
4. Tap the Option tab.
5. Change the options you want, then tap
Alert Tab
to exit.
The Alert tab allows you to set a notification sound when
these events occur:
• Minute beep
• Connect tone
• Disconnect tone
■ Select the options you want to enable, and then tap
to
exit.
102
Phone Settings (CDMA)
Service Tab
The Service tab allow you to configure your phone to
receive an incoming data call, change your roaming
mode, and set your GPS and Voice Privacy preferences.
To access the service settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon.
4. Tap the Service tab.
5. Change or set the following options:
• Data Mode - Allows you to set your phone to receive a data call.
• Roaming - Allows you to select a desired roaming option. For
more information, see "Roaming Options" on page 41.
• GPS - Allows you to specify if your phone sends global
positioning information whenever you make a call, for example,
Location On, or only when you make an emergency 911 call.
• Voice privacy - Standard Mode allows you to select the level
of encryption used when making or receiving phone calls.
Enhanced Mode offers more security but can be associated
with network delay while the advanced encryption is encoded
or decoded.
6. Tap
to exit.
Security Tab
The Security tab allows you to restore the factory default
settings for your phone or set emergency call numbers.
Caution: If you select the Phone Reset Button and confirm you want to
reset your phone, all of your phone settings and user installed applications
will be erased. You must enter your password before this can happen, but
Section 8: Changing Your Settings
103
all settings are restored to their factory setting when you perform this
operation.
The Emergency call feature provides you with three
numbers that you can assign and edit, as well as the three
911 emergency numbers, that can be called even when
your phone is in lock mode. Although the 911 numbers
appear in this list, they cannot be edited.
To access the options on this menu follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon, then select the Security tab.
4. Tap the button of the function you want. You can choose
from the following:
• Phone Reset
• Emergency Call
Note: If you select either Phone Reset, you will be prompted to enter your
security password. By default this password is the last 4 digits of your
phone number unless you have changed it. For more information about
setting a password, see "Password Setting" on page 98.
5. Follow the directions to complete the function you
selected, then tap
to exit.
SMS Tab
The SMS tab allows you to configure the SMS CallBack
Number. To access the options on this menu follow these
steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
104
Phone Settings (GSM)
3. Tap the Phone icon, then select the SMS tab.
4. To change the SMS CallBack Number, tap the box and
enter the number you want.
5. Tap
to exit.
Phone Settings (GSM)
Phone options are divided into the following tabs:
• Phone: Allows you to set the Sounds and Security options.
• Sounds: Allows you to set the Ring type, Ring tone, and Keypad
tones.
• Security: Allows you to set a Required PIN number when using
your phone.
• Services -Allows you to configure Call Barring, Caller ID, Call
Forwarding, Call Waiting, Voice Mail and SMS settings.
• Network: Allows you to set the Current network, the Preferred
networks, and to set the Network selection (Automatic or
Manual).
• Call: Allows you to set the Call Answer option (slider open or
slider close). You can set the Auto Answer option. Choose from
Off, 3 sec, 5 sec or 10 sec. You can set Alert Tone
option(Connect Tone, Disconnect Tone, Minute Reminder ON/
OFF
• SMS: Allows you to set and view the Reply Path and set the Def.
Validity. Choose from one Hour, 6 Hours, 24 Hours, One Week,
and Maximum.
• Security - If this option is provisioned with your SIM card, it
allows you to set a Call Barring Password to restrict specific
types of incoming and outgoing calls to and from your phone.
You can also lock the SIM card by tapping the Enable the SIM
Lock option.
Section 8: Changing Your Settings
105
Phone Tab
These options allow you to configure several different
settings that are specific to the phone including:
• System Sounds
• Keypad Tones
• Security Setting
Phone Ringer Options
You can select several different phone ringer sounds for
the i830. You can also change the ring type and its tone, as
wellassetanalertforwhenvoiceprivacyisnotavailable.
To access these settings:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon. The Phone screen displays.
4. Tap the Ring type drop down arrow and select the ring
type you want.
5. Tap the Ring tone drop down arrow and select the ringer
sound you want.
Note: To hear the ring tone, use the player controls located to the right of
the Ring tone drop down box. Tap the arrow to play the tone, tap the square
to stop.
6. Check the Security box Require PIN when phone is used.
Tap Change PIN and follow on screen instructions.
7. Tap
to exit.
106
Phone Settings (GSM)
Security
This field allows the Personal Identification Number
(PIN) protection to use the phone. To enable Security,
placeacheckintheRequirePINwhenphoneisusedbox.
Tone Length
When dialing a phone number, tones are emitted each
time a key is tapped. These tones can be modified to be
short, long, or even turned off. In some cases, longer tone
lengths may be necessary to access automated systems
such as voicemail.
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone.
4. Tap the Keypad drop down arrow and select:
• Tones - When the QWERTY keypad or the on-screen keyboard
for the phone is tapped, a short tone is played.
• Beep - When the QWERTY keypad or the on-screen keyboard
for the phone is tapped, a beep is played.
• Off - No tones are played when the QWERTY keypad or the on-
screen keyboard for the phone is tapped.
5. Tap
Services Tab
Call Barring
to exit.
Call Barring allows you to restrict specific types of
incomingandoutgoingcallsforyourphone.Thisisuseful
ifyouallowsomeonetouseyourphoneforashortperiod
of time.
1. Tap Start located in the upper left corner of the screen.
Section 8: Changing Your Settings
107
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone. Tap the Services tab.
4. Tap Call Barring, and tap Get Settings...
• The following options are provided:
All Outgoing: Disable all outgoing calls.
• Internatioinal: Disable International calls only.
• Iternational Except To Home: Disable International calls,
except those calls to your home.
• All Incoming: Disable all incoming calls.
• In While Abroad: Disable all international calls while out of
your home service area.
• Off: Cancel all Call Barring.
5. Enter your selection and tap
Caller ID
.
Caller ID displays the number (and name, if in your
Phonebook) of incoming calls. Unlike Verizon (CDMA)
mode, Caller ID in GSM mode must be enabled by the
user.
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone. Tap the Services tab.
4. Tap Caller ID, and tap Get Settings...
5. Tap Hide Number, or Send Number, then press
Call Forwarding
.
Call Forwarding allows you to select from up to four
options (or conditions) to forward your calls to another
number.
108
Phone Settings (GSM)
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone. Tap the Services tab.
4. Tap Caller Forwarding, and tap Get Settings...
5. Choose from the following options:
• Divert Always: Forward all calls to the specified number.
When roaming off the Verizon Wireless Network, availability of
this feature varies by service provider and may be limited or
restricted in some areas
• Busy: Forward calls to the specified number only when busy.
When roaming off the Verizon Wireless Network, availability of
this feature varies by service provider and may be limited or
restricted in some areas
• No Reply: Forward calls to the specified number when there
is no reply. When roaming off the Verizon Wireless Network,
availability of this feature varies by service provider and may be
limited or restricted in some areas
• Unreachable: Forward calls to the specified number when
unreachable. This feature is not supported at this time.
• Cancel All: Cancel all call forwarding. When roaming off the
Verizon Wireless Network, availability of this feature varies by
service provider and may be limited or restricted in some areas.
6. Tap the desired call forwarding option, then press
.
7. Follow the on-screen instructions to complete the
desired Call Diverting request.
Call Waiting
Call Waiting notifies you of an incoming call even while
you’re in a call. You can then accept, reject, or ignore the
Section 8: Changing Your Settings
109
incoming call. Unlike Call Waiting in Verizon (CDMA)
mode, Call Waiting in GSM mode must first be activated.
Note: When roaming off the Verizon Wireless Network, availability of this
feature varies by service provider and may be limited or restricted in some
areas.
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap Phone. Tap the Services tab.
4. Tap Caller Waiting, and tap Get Settings...
5. Highlight Call Waiting, then press
.
6. Highlight Activate, then press
.
Voice Mail and SMS
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon.
4. Tap Voice Mail and SMS, and tap Get Settings...
5. The number to call your voicemail is displayed in the
SMS service center and Voice Mail box. To change the
number, tap the box and enter the number you want.
6. Press
.
Note: This number is automatically setup when you receive your phone.
You will probably not need to change it unless otherwise instructed by your
carrier.
110
Phone Settings (GSM)
Network Tab
TheNetworktaballowsyoutoviewthecurrentnetwork
your phone is using and set the network selection for
your phone. Choose between Automatic and Manual.
After your selection press
.
Call Tab
The Call tab allows you to set the Call Answer option.
Choose between the following:
• Call Answer by the slider open: Answers the call when you
open the slider of the phone.
• Call Release by the slider close: Ends the call when you close
the slider of the phone.
• Auto Answer: Choose from Off, 3 sec, 5 sec, and 10 sec.
• Connect/Disconnect Tone: To hear a tone at connect or
disconnect, select On. Select Off for no tone played at
connect or disconnect.
• Minute Reminder: To hear a tone in 60 second increments,
select On. Select Off for no tone.
After your selection press
.
SMS Tab
The SMS tab allows you to configure the SMS Call Back
Number. To access the options on this menu follow these
steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon, then select the SMS tab.
4. To change the Reply Path, tap On or Off.
Section 8: Changing Your Settings
111
5. To change the Def. Validity, tap the box and enter the
number you want. Available options are, Maximum, One
Hour, 6 Hours, 24 Hours, or One Week.
6. Tap
to exit.
Security Tab
The Security tab allows you to restore the factory default
settings for your phone, set emergency call numbers, or
display the current hardware and software version of
your i830.
To access the options on this menu follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, the Personal tab is displayed.
3. Tap the Phone icon, then select the Security tab.
4. Tap the button of the function you want. You can choose
from the following:
• Call Barring Password: This option allows you to change
your security password. Enter the Old Password, The New
Pasword and Confirm Password. Tap OK to save your
new password.
• SIM Lock: This option allows you to lock the information you
have stored to your SIM card. Tap the box to enable the SIM
Lock. Enter your PIN number by tapping the keyboard icon in
the lower right of your screen. Tap OK to enable SIM Lock.
5. Follow the directions to complete the function you
selected, then tap
to exit.
Service Mode (GSM)
1. With the slider down, tap Start and tap Settings.
112
Phone Settings (GSM)
2. The Personal tab is highlighted. Tap Service Mode. The
following options appear in the display.
• Int’l GSM
• VZW CDMA
3. Tap desired mode of operation, then press OK. A
dialogue box appears in the display asking if you wish to
reset modes.
4. Type Yes and press OK. Tap Cancel to return to the
previous screen.
5. If you pressed OK, the phone restarts and powers up in
the selected mode of operation.
Section 8: Changing Your Settings
113
114
Section 9: Personal Digital Assistant
Topics Covered
• Your Personal Digital Assistant
• Picsel Browser
• Microsoft Pocket Applications
• Add Dormant Mode
• Windows Media Player
• Sprite Backup Utility
• Application Management
• Memory Adjustments
This section introduces applications included with your
phone.Youcanviewdifferentdocumentformatswiththe
document viewing tool, access word processing and
spreadsheets documents, and even instant message
othersusingthepreloadedapplicationsonyourSamsung
SCH-i830.
Section 9: Personal Digital Assistant
115
Your Personal Digital Assistant
The i830 is an integrated communication device with the
powerofamobilephoneandtheintelligenceofaPC. The
i830 is loaded with familiar Microsoft® pocket
applications, like Pocket Outlook, Pocket Internet
Explorer, MSN® Messenger, Windows® Media™ Player
10 for Pocket PC, Pocket Word & Excel, and several
specialty applications.
Picsel Browser
Picsel Browser allows you to view documents on your
handset without converting files. The document display
environment brings new levels of satisfaction to your
browsing and document viewing experience by
supporting popular file formats from your desktop
environmentintheirnativeformwithoutanyconversion.
Theinterfacealsoallowsyoutonavigateyourdocuments
by simply touching your stylus to the screen, and then
panning documents or zooming in or out to view every
detail of your documents.
Launching the Picsel Browser
To launch the Picsel Browser, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Select Programs, then tap Picsel Browser. The browser
displays.
3. To view the main menu, tap on the Picsel logo
in
the lower right of your screen to display the program’s
carousel.
116
Picsel Browser
4. Choose the function you want by selecting the
appropriate icon.
Navigating Picsel Browser
To pan (or 'scroll') to a different part of the document,
simply stroke your pen across the screen in the direction
you would like the page to move. To pan the page up,
touch and hold your pen somewhere near the middle of
thescreenanddrawalinetowardsthetop,thentakeyour
pen off the screen. You can do this repeatedly so that you
can view any size of document.
Further, you can 'throw' the
document across the screen, and
itwill continuemoving after you
have released the pen. This gives
you time to start another stroke.
This inertia can be used to save
time while you pan around the
document.
You can also zoom the size of the
document, so that more or less of
it is visible at a different size. The
tap-and-stroke gesture for this is
to tap your pen briefly near the middle of the screen then
touchandholditagaininthesameplace(a“double-tap”).
Now,strokeyourpenuptozoomin,ordowntozoomout.
Releaseyourpenwhenyoureachthescaleyoulike.Using
this, you can view small print details on diagrams, or can
get an overview of a whole page.
Section 9: Personal Digital Assistant
117
ThereisamenuofoptionsavailableforPicselBrowserby
tappingtheiconinthebottomrightcornerofyourscreen.
Usingthemenu,youcanopennewdocuments,adjustthe
screen, configure the settings for Picsel Browser, or exit
from the application. To find out what each option does,
press and holdyour stylus onan icon to display a tool-tip
that explains the highlighted option.
Views
There are four main views in Picsel Browser that allow
youtochoosethedocumentsyouwanttoview.Thesecan
all be selected from the main browser menu.
Reflow Layout
The Reflow Layout allows you to see your documents.
You can pan (scroll) or zoom to read any part of a
document. You can also move between the pages of
longer documents by stroking your stylus along the
118
Picsel Browser
bottomofthescreen, liketurningthepagesofabook.You
canalsorotatethedocumentviewbetweenlandscapeand
portrait format to suit your reading style.
View Bookmarks
The View Bookmarks allows you to keep track of your
favorite documents or web sites so that you can return to
them easily. You can adda document to thislistusing the
menu option in the Document View, or you can remove
them by using the options in this view.
Explore Directories
The Explore Directories allows you to explore
documents stored on your i830 or on the optional
memory cards. You can look inside folders for other
documents, oryou can change theorder and appearance
of the lists using special options on the menu.
View History
The ViewHistory records all of the documents you have
looked at in the past. You can use this to remember where
you've been or to return to the pages without finding an
individual file again. You can also adjust the amount of
timethehistoryisrecordedfor, ordeleteeverythingfrom
it by using Preferences, which are described below.
Preferences
There are several options in Picsel Browser that you can
adjustaccordingtoyourpreferences. Whilemostofthem
are a matter of choice, such as the number of days after
whichitemsareremovedfromthehistorylist,someaffect
proper operation of the application. For example, if you
Section 9: Personal Digital Assistant
119
needa“proxy”toaccesstheInternet,youcanselectthisin
the preferences from the main menu. Picsel Browser can
display documents in many other languages. Since
character encodings used to store text are not always
clearly identified in some documents, you can set the
preference for the default which will be used on
documents in your native language.
Formoreinformation,youcanaccessTool-tips,whichare
iconslocatedinthemenusofeachview.Toviewthese,tap
andholdyourstylusoveranyicontodisplayinformation
about the item you have selected.
Microsoft Pocket Applications
MSN Messenger
Log onto Microsoft MSN® Messenger and chat with
othersrightfromyouri830.Usingwirelessdataprovided
by your carrier, you can quickly send instant messages to
yourlistofonlinebuddies,orinteractwithseveralpeople
at the same time. The chat window lets you read and write
messages, and notifications alert you if others are trying
to get in touch. “My Text” lets you store and recall
frequently used messages so you can respond without
composing a reply.
MSN Messenger is a MSN Passport service and requires
a Passport, Hotmail®, or MSN account.
Login to MSN Messenger
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap MSN Messenger. The MSN Messenger sign in
screen appears in the display.
120
Microsoft Pocket Applications
4. Tap in the center of the display to sign in.
5. Enter your Sign in name from your Passport, Hotmail, or
MSN account.
6. Tap the Password field, then enter the password from
your Passport, Hotmail, or MSN account. Use the
password for the account entered in the Sign in field.
7. Tap the empty box next to Save password if you want
the password entered automatically the next time you
sign in.
8. Press Sign In to log in to MSN Messenger, or tap Cancel
to return to the previous menu.
Add a Buddy to Your Contact List
A buddy is another MSN Messenger user who shares
similar interests. MSN Messenger automatically notifies
a buddy when the other is online.
1. Once you’ve logged in to MSN Messenger, tap Tools.
2. Tap Add a Contact, then enter the E-mail address of the
buddy you wish to add to your contact list.
Note: Only valid Passport, Hotmail®, or MSN accounts can be added to
your contact list.
3. Tap Next.
An instant message is sent to the E-mail address of the
buddy you’ve added notifying them that you’ve added
them to your contact list. They are given the opportunity
to accept your request or block further requests. A
messageappearsinyourPocketPCdisplaythatconfirms
or denies the request.
Section 9: Personal Digital Assistant
121
4. Tap OK when finished.
5. Your buddy’s E-mail address appears under Online or
Not Online in the display, depending on their status.
Start a Chat Session
You can chat with another person if they’re online and
you’ll both receive your responses in “real time,” which
means that there is very little delay. You can even join
more than one chat at the same time.
1. Once you’ve logged in to MSN Messenger, tap and
highlight the buddy that is online.
2. Enter the text of your conversation using the desired
method of input, then tap Send.
3. If your buddy is online, they will hear a tone and a
dialogue box appears in the display of their device.
4. When your buddy responds, you’ll receive their response
almost immediately.
Invite Others to Chat
If you’re involved in more than one chat session at a time,
you can invitepeoplefrom other chat sessions tojoin you
in another session.
1. While in a chat session in which you want to invite
others, tap Tools. A pop-up menu displays.
2. Tap Invite. A list of users from other chats you are
involved in displays.
3. Tap and highlight a user in the list that you want to invite.
4. To invite multiple users, repeat steps 1 through 3 as
many times as necessary.
122
Microsoft Pocket Applications
View Chat Members
To view the list of members in a chat session:
1. While in a chat, tap Tools. A pop-up menu appears in the
display.
2. Tap Chat Members. The buddy list of members involved
in the chat session appear in the display.
3. Tap OK to return to the chat screen.
End a Chat Session
1. While in a chat session, tap OK.
2. You are returned to the buddy screen.
Block a Contact
Once you block a contact, the blocked contact can’t see
you online. This works both ways; you can’t send a
messagetoablockedcontact,althoughyoucanseeifthey
are online.
1. At the buddy screen, tap Tools. A pop-up menu displays.
2. Tap Options, then select the Privacy tab.
3. To add a buddy to the My Block List, tap and highlight
the name you want in My Allow List, and then press >>
to move the name over.
4. Tap OK. You’re returned to the buddy screen.
Unblock a Contact
1. At the buddy screen, tap Tools. A pop-up menu displays.
2. Tap Options, then select the Privacy tab.
Section 9: Personal Digital Assistant
123
3. To move a buddy back to the My Allow List, tap and
highlight the name you want in My Block List, and then
press << to move the name over.
4. Tap OK. You’re returned to the buddy screen.
Sign out of MSN Messenger
1. At the buddy screen, tap Tools.
2. Tap to highlight Sign Out. You’re returned to the MSN
Messenger main screen.
Note: If the session does not end, tap
Disconnect. If you want to suspend and resume the session later, press the
End key
in the title bar, and then tap
.
Pocket Internet Explorer
You can use Internet Explorer to view web pages on your
i830 in two different ways:
• By downloading pages and then performing an ActiveSync
operation.
• By connecting to the Internet Directly via your wireless data
connection.
While browsing you can also download new files and
programs.
Launch Internet Explorer
1. Tap Start located in the upper left corner of the screen.
2. Tap Internet Explorer.
124
Microsoft Pocket Applications
Note: Microsoft Pocket IE does not support all browser functions supported
by PC IE; therefore, browser functions might not work in some internet
sites.
Save Favorites
When you find a web page that contains useful or
interesting information, it can be saved as a favorite.
1. Tap Start located in the upper left corner of the screen.
2. Tap Internet Explorer.
3. Navigate to the desired website.
4. Tap the yellow star
icon in the command bar.
5. Tap the Add/Delete tab.
6. Select the desired folder and tap Add.
7. Tap Add again.
8. Tap
to save and exit.
Internet Pass Through
Your i830 can use a desktop’s/laptop’s Internet access
when connected to it. Using Internet pass through, your
i830 displays online content with Pocket Internet
Explorer.
1. Connect the i830 to your desktop/laptop machine and
perform an ActiveSync operation.
2. Tap Start located in the upper left corner of the screen.
3. Tap Internet Explorer.
Section 9: Personal Digital Assistant
125
Pocket Word
Pocket Word works with Microsoft Word on your
computer to give you easy access to copies of your
documents. You can create new documents or copy
documents from your computer to your i830.
Synchronizethe documents betweenyourcomputer and
your i830 to insure you have the most up-to-date content
in both locations.
Use Pocket Word to create documents, such as letters,
meeting minutes, and trip reports.
Create a New Document
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap New.
Note: If this is the first document being created, you will automatically be
in a new document screen.
5. Enter text using the desired character input method.
6. When finished, tap
to save and exit.
You can open one document at a time. If you try to open
a second document, you are asked to save the first
document. You can save a document in any one of the
following formats:
• Pocket Word Document (*.psw)
• Rich Text Document (*.rtf)
• Plain Text Document (*.txt).
126
Microsoft Pocket Applications
• Word 97/2000 Document (*.doc)
• Word 97/2000 Template (*.dot)
Attach a Recording
You can attach a recording to a word document using the
Record option. To attach a recording to an existing
document:
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Select the desired document form the list.
5. Tap View and select Recording.
6. Tap
7. When finished, tap
8. Tap to save and exit.
to start recording.
.
Pocket Word Options
The following options are available in Pocket Word:
• Default template - Allows you to select Blank Document,
Meeting Notes, Memo, Phone Memo, and To Do as the default
document.
• Save to - Allows you to select Main memory or a SafeStore as
the default document storage location.
• Display in list view - Allows you to display Pocket Word only,
Pocket Word & Text, and Known types in the document list
view.
Access Pocket Word options
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
Section 9: Personal Digital Assistant
127
3. Tap Pocket Word.
4. Tap Tools and select Options.
Delete a Document
To delete a Pocket Word document:
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap and hold the document you want to delete. A pop-up
menu displays.
5. Tap Delete. A confirmation window displays.
6. Tap Yes to delete the file.
Beam a Document via IR
To beam a document to another Pocket PC user:
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Word.
4. Tap and hold the document you want to beam. A pop-up
menu displays.
5. Tap Beam File.
6. Align the IR ports to beam the file to another user.
7. Tap
when you are finished.
Pocket Excel
Pocket Excel works with Microsoft Excel on your
computer to give you easy access to copies of your
workbooks. You can create new workbooks or copy
128
Microsoft Pocket Applications
workbooks from your computer to your i830.
Synchronize workbooks between your computer and
your i830 to insure that you have the most up-to-date
content in both locations. Pocket Excel also provides
fundamental spreadsheet tools, such as formulas,
functions, sorting, and filtering.
Create a New Workbook
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Excel.
4. Tap New.
5. Enter text using the desired character input method.
6. When finished, tap
to save and exit.
Note: You can open one workbook at a time. If you try to open a second,
you are asked to save the first workbook.
Delete a Workbook
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap Pocket Excel.
4. Tap and hold the workbook you want to delete. A pop-up
menu displays.
5. Tap Delete.
6. Tap Yes to confirm the deletion.
Beam a Workbook via IR
1. Tap Start located in the upper left corner of the screen.
Section 9: Personal Digital Assistant
129
2. Select Programs.
3. Tap Pocket Excel.
4. Tap and hold the workbook you want to beam. A pop-up
menu displays.
5. Tap Beam File and align the IR ports.
6. Tap
when finished to exit the IR screen.
Dormant Mode
With your i830 you can seamlessly transition to a voice
call and then resume your data connection after your call
endsusingDormantmode. Dormantmodeallowsyouto
maintain data connections so you can easily continue to
instant message, download email, or browse the Web
after receiving a call.
Therearetwocommunicationprotocolsusedtoexchange
data in a wireless network, 1X and EVDO. Your i830
supports both protocols; however, certain features, such
as Dormant Mode, are only available in areas supporting
the high-speed 1X and EVDO data protocol and are not
available if the area in which your are using your phone
uses the 2G data protocol.
When you launch MSN Messenger or Pocket Internet
Explorer, your i830 establishes a data session so you can
send and receive information while using these
programs.Whenanactivedatasessionisestablished,you
willseethe data session icon
at the top of your screen.
To suspend your data session and resume it later, tap the
icon. The message, “Data session now dormant”
displays.
130
Windows Media Player®
The inactive
icon appears in the title bar, which
indicatesthe Dormantmodeisactive. To cancelDormant
modeandresumeyourdatasession,selecttheapplication
you were previously using.
Windows Media Player®
Use Microsoft Windows Media Player for Pocket PC to
play digital audio and video files that are stored on your
deviceordownloadedfromtheweb.Youcanplayfilesin
either Windows Media or MP3 format, including files
with extensions .asf, .wma, .wmv, and .mp3.
Launch Media Player
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Windows Media.
4. Tap the Menu tab, and tap Update Library.
5. Tap Search to locate new files. A message “The Library
has been updated. To continue, press Done.” displays.
6. Tap Done.
Load Media Player files
Media player files must be copied to the i830 using the
ActiveSync application. The files are copied to the Local
Contentfolderonthei830aftertheActiveSyncoperation.
To load a file:
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Windows Media.
Section 9: Personal Digital Assistant
131
4. Tap Menu, then tap Library.
5. Select the desired file from the list and tap
.
6. Tap
to play the file.
Media Player Controls
The following settings are available in the media player:
• Tap the Play icon to listen to a file. The Play icon turns into the
Pause icon once the file begins playing.
• This slider control adjusts the playback progress of the selected
file.
• The volume controls adjust the sound level during playback.
• Tap the mute control to toggle between mute on and off.
132
Sprite Backup Utility
Sprite Backup Utility
Sprite Backup helps you protect the data on your Pocket
PCfromdatalossduetohardwarefailure,drainedbattery
or accidental deletion. Use Sprite Backup to create a
backup copyof your Pocket PC's data toa safe location. If
data on your Pocket PC is accidentally erased or
overwritten or the battery time expires, you can easily
restore the data from a backup copy.
Basic Mode and Advanced Mode
Sprite Backup has two modes, Basic and Advanced. The
first time you run Sprite Backup, it is in Basic Mode. To
switch between the modes, select Options at the bottom
of your screen, then select Switch to Advanced Mode or
Switch to Basic Mode.
Basic Mode
Basic Mode is the default mode with an easy to use
interfaceformakingabackupwiththeminimumofeffort.
The Basic Mode screen displays the date and time that
your last backup was created and allows you to backup
your entire Pocket PC with the tap of a button.
Advanced Mode
Advanced Mode allows you to select the data you want
backed up, schedule regular backups, and enable
automatic backup when your battery is low. You can also
enable encryption and compression, and enable the
automatic maintenance of existing backup files.
To access the Sprite Backup Utility, follow these steps:
1. Tap Start located in the upper left corner of the screen.
Section 9: Personal Digital Assistant
133
2. Select Programs.
3. Tap Sprite Backup.
4. Tap Backup Now to perform a backup in Basic Mode,
or tap Options, and then select Switch to Advanced
Mode to select specific files or backup features.
For more information about using the Sprite Backup
Utility, launch Sprite and then tap the Windows icon
in the upper left corner of your screen. Select Help from
the drop down menu and follow the prompts.
Application Management
Your i830 is powered by Windows Mobile™ 2003
Software for Pocket PC Phone Edition, which allows
installation and removal any Pocket PC 2003 compatible
applicationonyourdevice.PocketPCapplicationscanbe
downloaded from the web, purchased at retail outlets, or
beamed from a friend using the IR feature.
Install New Applications
When a new application is downloaded from the web or
installedusingaCD,thefilesaretransferredtothemobile
device via ActiveSync. ActiveSync checks if enough
memory is available before installing a program. To free
up memory, simply remove old programs or delete
unused files.
Delete an Application
Some applications are large and take up space on your
i830.Tohelpmanagespaceandmemoryrequirementsfor
other software that may need to be installed, you can
134
Memory Adjustments
delete any application not required for your device to
operate correctly. To delete an application:
1. Tap Start located in the upper left corner of the screen.
2. Select Settings.
3. Tap the System tab.
4. Tap Remove Programs at the bottom of the screen.
5. Select the program from the list and tap Remove.
Memory Adjustments
Memoryismanagedautomatically,butitcanbeadjusted
using the memory slider. Memory is allocated to storage
and programs. Usually the amount is equally divided;
however, you can adjust one or the other to install or use
an application with more memory requirements.
1. Tap Start located in the upper left corner of the screen.
2. Select Settings.
3. Tap the System tab.
4. Tap Memory.
5. Tap and hold the slider left or right to allocate the desired
memory amounts.
6. Tap
to save and exit.
Memory Card
The memory card can be used to backup or save data to
avoid accidental loss due to battery discharge or other
unforeseen device data complications. The memory
storage card is inserted into the slot located on the side of
the unit. Once installed, the storage card is displayed on
Section 9: Personal Digital Assistant
135
the i830. When checking the memory allocation as
outlined above, the storage card can be selected to get an
accurate available memory setting.
TheSafeStoreoptionallowsyoutobackupandprotectup
to 59.59 megabytes of data using the backup utility.
136
Section 10: Personal Organizer
Topics Covered
• Today Screen
• Calendar
• Task List
• New Command
• Notes
• Alarm
• Calculator
• Active Sync
The topics covered in this section allow you to schedule
appointments, view the calendar, create Task lists, set an
alarm, perform simple math calculations, and setup up
yourphonesoyoucansynchronizeyourfilesandfolders
with your desktop PC.
Section 10: Personal Organizer
137
Today Screen
The Today screen is used as a default information screen
on the Pocket PC. When the i830 is turned on, the Today
screen is displayed. The today screen displays the
following information on the screen:
• Current Date and Time
• Owner Information
• Message Status
• Current Tasks
• Current Appointments
• Bluetooth Status
Date and Time Settings
Clock settings can be accessed from the Today screen by
tappingtheclockiconnexttothedayanddateentryonthe
screen.Clocksettingsallowyoutosetthetimezone,time,
and date for your home or visiting location.
1. From the Today screen, tap the clock icon
2. Select either Home or Visiting.
.
3. Set the time zone using the drop down arrow.
4. Tap the up or down arrow to set the correct time.
5. Tap the drop down arrow to set the correct date.
6. Tap
to save and exit.
138
Today Screen
Note: The time on the i830 handset does not automatically change when
you travel to another time zone. To ensure that you don’t miss any
appointments, you must change your clock setting to Visiting and then
select the appropriate time zone.
Owner Information
OwnerInformationiswhereyoucanstoreinformationon
the owner or user of the device. Name, Company,
Address, Telephone, E-mail, and Notes information
fields are available.
1. From the Today screen, use the stylus and select “Tap
here to set owner information”.
2. Tap the Name box in the Owner Information screen.
3. Use the stylus to tap the correct letters and spaces using
the on-screen keyboard. (To select the keyboard, tap the
up arrow located in the lower right corner of the screen
and select
.)
4. Tap the other desired information boxes and enter the
information using the stylus and on-screen keyboard.
5. When you are finished entering all the desired
information, tap
screen.
in the upper right corner of the
Message/Task Status
The Today screen displays the status messages you have
received and of the next or current task scheduled. You
can view you Inbox or the Task List by tapping on the
status lines. For more information about the Inbox, see
"Messaging" on page 78 and for more information about
Section 10: Personal Organizer
139
Current Appointments
To view the next upcoming appointment and battery
indicatorwithoutlaunchingthecalendarortodayscreen:
1. Tap the time in the upper right corner of the screen.
2. The Time and Next Appointment screen is displayed.
Bluetooth Status
The Bluetooth Status indicators on the Today screen let
you know if Bluetooth is turned on. The profile icons
indicate when one of the Bluetooth connections is active.
WhenBluetoothisOfftheBluetoothicon isgrayedout.
For more information about the Bluetooth connections,
IfyoutaptheBluetoothicon,theiconappearsblue and
On displays next to the profile icons. When a profile is
active, its icon is highlighted, which indicates that data is
being exchanged between your phone and another
Bluetooth device.
Calendar
The calendar allows you to create appointments and
reminders for the day, week, month, or year.
Schedule an Appointment
An entry in the calendar is called an appointment or
reminder. When you schedule an entry, a description is
displayedonthetimeline,andthedurationissetto1hour
by default. You can easily change the start time and
duration for any event. You can schedule the following
types of events in the calendar:
140
Calendar
• Timed appointments, such as birthdays and meetings, which
have a specific date, start, and end time.
• Untimed reminders, such as holidays, and anniversaries. These
occur on a particular date but have no specific start or end
times; they appear at the top of the list of times in a shaded
area. You can schedule more than one untimed event on the
same date.
• Repeating appointments, such as a weekly meeting that is held
on the same day at the same time each week.
• Continuous appointments, such as a vacation or three-day
conference.
• All day events, which reflect the default length of the day as set
by the user.
Schedule a Timed Appointment
You can schedule timed appointments for the current
date or for future dates.
To schedule a timed appointment for the current date:
1. Press the Calendar button
the calendar to the current schedule.
2. Tap New.
on your phone to open
3. Enter the Subject of the appointment or tap the drop
down arrow and select a preset subject.
4. Enter the Location if necessary.
5. Tap the drop down arrow next to the Starts and select
the desired starting time of the appointment.
6. Tap the drop down arrow next to the Ends and select the
desired ending time for the appointment.
7. Select Yes or No in the All Day setting.
Section 10: Personal Organizer
141
Note: If Yes is selected in All Day the time is automatically removed in the
start and end times to indicate that there is no time limit.
8. Tap the Occurs box to select the frequency.
9. Tap Reminder and select either None or Remind Me. If
Remind Me was selected, enter the amount of time
before you are reminded.
10. Tap Categories and select either Business, Holiday, or
Personal. You can also add or delete categories with the
Add/Delete tab. Tap
when finished.
11. Tap the Attendees box to invite others to the
appointment from your contacts. Contacts must have an
E-mail address to be added as an attendee.
12. Tap the Status box and select Free, Tentative, Busy, or
Out of office.
13. Tap the Sensitivity box and select either Normal or
Private.
14. Tap
to save the new appointment.
Change the Calendar view
You can change your calendar view to the following:
• Agenda - Displays a list of the current days appointments.
• Day - Displays the day with times and any appointments.
• Week - Displays the week.
• Month - Displays the month.
• Year - Displays the year.
To change the view of the calendar, follow these steps:
142
Calendar
1. Press the Calendar button
on your phone to open
the calendar.
2. Tap the row of calendar icons located on the bottom of
the screen to switch to the desired view.
Calendar Options
Calendar Options allow you to select what day of the
week your calendar starts upon, whether you view a 5-
day, 6-day, or 7-day week, options for reminders, and
more.
1. Press the Calendar button
on your phone to open
the calendar.
2. Tap Tools and select Options.
3. Tap 1st day of week to select the day that you want the
calendar to start on, either Sunday or Monday.
4. Tap Week view to select from a 5-day, 6-day, or 7-day
week.
5. To display half hour slots when you view your calendar,
tap the empty box to the left of Show half hour slots.
6. To show the number of the week in your calendar, tap
the empty box to the left of Show week numbers.
7. To set reminders for new calendar items, tap the
Appointments tab, then tap the empty box to the left of
Set reminders for new items.
8. Select the reminder time in the drop down boxes
beneath Set reminders for new items.
9. Tap the icons that you wish to display in the calendar.
Section 10: Personal Organizer
143
10. Select Outlook E-Mail or Text Messages as the default
method for sending meeting requests in the drop down
box labeled Send meeting requests via.
11. Tap
to save your settings and return to the
calendar.
Tasks List
A task is something that needs to be done in a certain
amountoftimeandrequiresareminderoncethedeadline
has been reached. Once a task is complete, it can be
checkedoffandanothertaskcanbestarted.Atasklistcan
be set up to keep track of tasks. Tasks can also be
prioritized, so that higher priority items are finished first.
Create a new Task
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Tap Tasks.
3. Tap New.
4. Enter a Subject. You can also tap the drop down arrow
to select a default subject.
5. Tap the Priority box and select:
• High
• Normal
• Low
6. Tap the Status box, the select completion status.
7. Tap the Starts box and enter the starting date.
8. Tap the Due box and enter the ending date.
144
Tasks List
9. Tap the Occurs box and select how often the task
occurs.
10. If you would like a reminder of when the task is due, tap
the Reminder box and select Remind me.
11. Tap the Categories box and select Business, Holiday,
or Personal. Tap
12. Tap the Sensitivity box and select Normal or Private.
13. Tap to save the task.
.
When the task is saved, it is addedtothetasklist.Thetask
list allows you to sort the tasks based on priority level,
subject, start date, due date, or status.
Mark a Task complete
When a task is completed, a check is used to indicate the
item is done.
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Locate the desired task from the list and tap the check
box located to the left of the task entry.
Task Options
The following task options are available in the task list:
• Set reminders for new items - If this option is selected, an alert
is automatically created when a new task is created.
• Show start and due dates - If this option is selected, the start
and due date is displayed in the task list.
Section 10: Personal Organizer
145
Access Task Options
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Tap Tools and select Options.
The Task Entry Bar
Thetaskentrybaroptionautomaticallyplacesabaratthe
topofthescreentoallowyoutocreateanewtaskwithout
navigatingthroughthemenu. Yousimplytapthebarand
enteranametocreateanewtask.Thisoptiondoesnotput
in any start or end times. To enter any additional
information you need to edit the task.
Activate the Entry Bar
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Tap Tools and select Entry Bar.
Edit a Task
To edit a task:
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Select the desired task from the task list.
4. Tap Edit.
5. When finished, tap
to save and exit.
146
Tasks List
Beam a Task via IR
You can beam a task to another Pocket PC using the IR
port. This operation requires that both users have the
Pocket PC software. To beam a task:
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Select the desired task to beam.
4. Tap Tools and select Beam Task.
5. Tap and hold on a task to access Beam Task option.
6. When the task is successfully transferred, OK appears in
the display.
Add a Note to a Task
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Select the desired task from the task list.
4. Tap Edit.
5. Tap the Notes tab.
6. When finished adding the note, tap
to save and exit.
Delete a Task
1. Tap Start located in the upper left corner of the screen
and select Programs.
2. Select Tasks.
3. Tap the desired task from the task list.
Section 10: Personal Organizer
147
4. Tap Tools and select Delete Task.
5. You can access to delete Task when tap and hold the
desired task in the list.
6. Tap Yes to confirm the deletion.
New Command
The New command located in the bottom left side of the
screen allows you to create a new:
• Appointment
• Contact
• Excel Workbook
• Message
• Note
• Task
• Word Document
To access the New command:
1. Tap New located in the bottom left corner of the screen.
2. Select any of the choices to launch the application.
Notes
Quickly capture thoughts, reminders, ideas, drawings,
and phonenumbers with Notes. Notescanbeattachedto
contacts, appointments, messages, and tasks. Notes can
be either recorded or written.
Record a Note
1. Tap Start located in the upper left corner of the screen.
148
Notes
2. Tap Programs, then tap Notes.
3. Tap New.
4. Tap the recording icon
5. Tap to start recording, and then tap
Record a Quick Note
.
to stop.
■ When you are located in the Notes application, you can
press and hold located on the Voice Memo key on the side
of your phone to begin recording quickly. When you release
the button, the recording stops and the new note is dis-
played in the notes list.
Record Yourself During a Call
Duringacallyoucanrecordyourselfspeakingtoanother
caller, so you can save directions or a phone number.
Note: You can only record your voice and not the other caller using this
feature.
To record:
1. Make a call to the desired person.
2. During the conversation, press and hold located on
the Voice Memo key on the side of your phone to begin
recording.
3. When finished, release the to stop recording.
4. End the call.
Note: The call needs to be disconnected to listen to the recording. If the
call is still connected, there is no audio.
Section 10: Personal Organizer
149
5. To listen to the recording, tap the entry from the notes
list.
Write a Note
1. Tap New in the lower left hand corner of the screen.
2. Tap the writing icon . This is the default choice.
3. Select the character input method by tapping the arrow
in the right bottom corner.
4. Compose your note, then tap
when finished.
Delete a Note
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs, then tap Notes.
3. Tap the note you want to delete from the list of notes
displayed.
4. Tap Tools and select Delete Note.
5. You can delete a note when you tap and hold the desired
note in the list.
6. Tap Yes to confirm the deletion.
Note: You can also tap and hold the note in the notes list, then select
Delete from the pop-up menu.
Note Options
The following options are available for Notes:
• Default mode - This option allows you to select a default mode
of Writing or Typing.
• Default template - Allows you to select Blank Note, Meeting
Notes, Memo, Phone Memo, or To Do as the default note.
150
Alarm
• Save to - Allows you to select Main memory or a SafeStore as
the default note storage location.
• Record button - This option allows you to add a recording to
your note in addition to the written note.
To access the note options, follow these steps:
1. Select Notes.
2. Tap Tools and select Options.
Alarm
Schedule an Alarm
Your phone has four alarm clocks that can be configured
to ring daily at a desired time. To set up the alarm clock:
1. From the Today screen, tap the clock icon
2. Tap the Alarms tab.
.
3. Tap the box next to the desired alarm.
4. Tap the day of the week.
5. Tap the time to display the time settings. Tap the up or
down arrows to select the desired time.
Note: Tap the AM or PM to cycle between them.
6. Tap
and exit.
when finished, and then tap
again to save
Calculator
The calculator allows you to perform general
mathematical functions, such as addition, subtraction,
multiplication,anddivision.Youcanusethecalculatorto
Section 10: Personal Organizer
151
performbasic calculations, store andretrieve values, and
display the last series of calculations.
Using the Calculator
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs, then tap Calculator.
3. Tap the numbers and functions you want.
4. When finished, tap
to exit.
ActiveSync®
Microsoft ActiveSync synchronizes data between your
PC and the i830. ActiveSync is already installed on the
i830, but needs to be installed on your PC before you can
synchronize data.
System Requirements
Your computer needs the following software and
hardware to use ActiveSync:
• Microsoft Windows XP, Windows 2000, Windows Millennium
Edition, Windows NT Workstation 4.0 with SP6 or later.
• Microsoft Internet Explorer 4.01 SP1 or later
• Hard-disk drive with 12 to 65 MB of available hard-disk space
(actual requirements will vary based on selection of features
and user's current system configuration)
• Infrared port, or USB port (available for Windows 98, Windows
Me, Windows 2000, and Windows XP only)
• A CD-ROM drive
• VGA graphics card or compatible video graphics adapter at 256
color or later
152
Install ActiveSync
Install ActiveSync
1. Search www.microsoft.com to download the ActiveSync
software on your PC.
2. Select the Start Here tab.
3. Click the Install ActiveSync 3.7 menu selection.
4. Click Install and follow the onscreen instructions.
Connect the Cradle
1. Connect the USB connector from the i830 cradle to an
available USB port on your PC.
2. Plug the AC adapter for the cradle into a standard 120
VAC wall outlet.
3. Insert the i830 into the cradle, bottom end first.
ActiveSync detects the i830 and you’re prompted to
setup a partnership.
Setup a Partnership
After you’ve installed ActiveSync, connected the
desktop cradle to your PC, and inserted the i830 into the
cradle,you’repromptedtosetupapartnership.Thereare
two types of partnerships Standard Partnership and
Guest Partnership.
■ A Standard Partnership synchronizes data between your
i830 and PC. Synchronization ensures that all relevant data
is updated, and is the best method for using your i830 along
with your PC to keep files up to date and stay connected.
■ A Guest Partnership simply transfers files between your
i830 and PC.
1. Select the desired partnership and click Next.
Section 10: Personal Organizer
153
2. Select how you want to synchronize data and click Next.
3. Enter a unique name for your device and click Next.
4. Select or deselect the desired applications that you wish
to synchronize, then click Next.
5. Click Finish.
The i830 and the PC should perform the first ActiveSync.
This may take some time, depending on the amount of
information that needs to be synchronized.
ActiveSync via IR
If you need to useActiveSync and don’t havea cable, you
can use the IR port.
1. On the PC, launch the ActiveSync application.
2. Click File and select Connection Settings.
3. Click the check box next to Allow serial cable or infrared
connection to this COM port.
4. Click the drop down arrow and select Infrared Port (IR).
5. Click OK to close the window.
6. On the i830, tap Start located in the upper left corner of
the screen.
7. Tap ActiveSync.
8. Tap Tools and select Connect via IR.
9. Aim the two devices at one another.
154
Section 11: Network Services
Topics Covered
• Call Forwarding
• Three-way Calling
• Call Waiting
• Caller ID
This section allows you to set up the network functions
supportedbyyourcarrier.Someoftheseservicesmaynot
be available due to coverage area or service plans. If you
have any questions, please contact your service provider.
Section 11: Network Services
155
Call Forwarding
CallForwardingallowsyoutoforwardallyourincoming
calls to another phone number, even when your phone is
turned off.
To activate call forwarding, follow these steps:
1. Tap
.
2. Enter the area code and phone number where the
incoming calls are forwarded.
3. Tap
feature change.
To deactivate call forwarding, to the following:
. A confirmation recording confirms the
■ Tap . A confirmation
recording confirms the feature change.
Three-way Calling
Three way calling allows you to talk to two different
people at the same time. Whenusing this feature, normal
airtime rates apply for each of the two calls.
To use three way calling:
1. Enter the number you wish to call and tap
.
2. During the conversation, tap
.
3. Dial the second person and tap
.
4. When the person answers, tap
again to connect
all three parties.
If one of the people you called hangs up, you and the
remaining caller stay connected. If you initiated the call
156
Call Waiting
and are the first one to hang up, all three calls are
disconnected.
Call Waiting
Youcanansweranincomingcallwhileonanexistingcall.
If you are on an existing call and another call is received,
a tone isheardand a call waiting message is displayedon
the screen. If the caller is stored in the address book, their
name is also displayed.
Answering a waiting call
1. Tap the Answer button. The phone connects to the other
call while placing the existing caller on hold.
2. Tap the
original caller.
button again to switch back over to the
Caller ID
Caller ID alerts you to who’s calling by displaying the
phone number of the person calling when you receive an
incoming call. Similarly, if you call someone who has this
feature, your phone number displays on their phone. If
the caller’s name and number are already stored in your
Internal Phone Book, the corresponding name appears
with the number.
■ To block caller ID from displaying when you call another
user, tap
number.
and then dial the phone
Section 11: Network Services
157
158
®
Section 12: Bluetooth Services
Topics Covered
• About Bluetooth Wireless Technology
• Bluetooth Service Profiles & Modes
• Bluetooth Bonds
• Bluetooth Hands-free Device
• Bluetooth OBEX FTP
• Bluetooth Virtual Serial Port
• ActiveSync via Bluetooth Wireless Technology
• Using Bluetooth Keyboard
• Beaming Using Bluetooth
This section explains the Bluetooth wireless technology
and features available with your Samsung SCH-i830, as
well as certain connection related details necessary for
configuring your phone to work with these services.
Section 12: Bluetooth® Services
159
About Bluetooth Wireless Technology
Bluetooth wireless technology provides short range
wireless communication exchange over a distance of
about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to
beam information using Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in
different rooms.
Your i830 allows you to beam files, appointments, tasks,
and contact cards between common devices or you can
useBluetoothwirelesstechnologyenabledperipheralsto
integrate with your device.
Bluetooth Service Profiles
Actually, theBluetooth wireless technology specification
is a protocol that describes how the short-range wireless
technology works, whereas individual profiles describe
the services supported by individual devices like your
i830. Profilesreducethechancethatdifferentdeviceswill
not work together.
Your i830 supports the following profile services:
• SDAP (Service Discovery Application Profile)
• FTP (File Transfer profile)
• GAP (Generic Access Profile)
• HFP (Hands Free Profile)
• HSP (Headset Profile – Note: stereo headset profile not
supported)
160
Bluetooth Modes
• HID (Human Interface Device Profile - Bluetooth keyboard only)
• OBEX (Object Exchange Profile)
• SPP (Serial Port Profile)
• ActiveSync (Uses SPP to connect to ActiveSync on a computer)
Bluetooth Modes
Bluetooth operates in two modes:
On/Off Mode
When the Bluetooth radio is turned on, you can use the
Bluetooth wireless technology features available in the
i830. When the Bluetooth radio is turned off, you cannot
sendorreceiveinformationviaBluetooth.Tosavebattery
life or in situations where radio use is prohibited, such as
airline traveling, you can turn off Bluetooth wireless
technology in your i830.
Turning Bluetooth On/Off
1. Tap Start in the upper left hand portion of your screen.
2. Tap Settings, and then select the Connections tab.
3. Tap Bluetooth.
4. Select or clear the “Turn on Bluetooth” check box. The
Bluetooth radio is turned on or off depending on your
selection.
5. Tap
to return to the Connections tab.
Note: You can tap the Bluetooth icon on your Today screen to quickly turn
Bluetooth on and off. Bluetooth wireless technology turns off when your
phone is off.
Section 12: Bluetooth® Services
161
Discoverable Mode
When your i830 is discoverable, other devices will
automatically detect it while searching for compatible
Bluetooth wireless technology enabled devices with
whichtoconnect.Yourphonemustbeonandyouhaveto
turn on the embedded Bluetooth radio.
Whenthediscoverablemodeisactive,amessagedisplays
when another device attempts to establish a bond or
connect with your phone. You must accept the incoming
beam to exchange data or information with other
compatible Bluetooth wireless technology enabled
devices.
Making your i830 Discoverable
To set your phone to be discoverable by other devices,
follow these steps:
1. Tap Start in the upper left hand portion of your screen.
2. Tap Settings, and then select the Connections tab.
3. Tap Bluetooth.
4. Select the “Turn on Bluetooth” check box, and then
select the “Make this device discoverable to other
devices” check box.
Other common devices can now detect your device and
attempt to beam information to it, establish a connection,
or use a Bluetooth service.
Note: If you do not want your i830 to be discoverable, clear the “Make this
device discoverable to other devices” check box.
162
Bluetooth Bonds
Bluetooth Bonds
Abondisarelationshipthatyoucreatebetweenyouri830
and another Bluetooth wireless technology enabled
device to exchange information in a secure manner.
Creating a bond involves entering the same Passkey on
the two devices sharing a bond. Once a bond is created
between devices, the devices do not have to be
discoverable to exchange information; however, each
device must have its Bluetooth radio on.
Bonds are created only once between devices. Once a
bond is created, devices can exchange information as
soon the bond is recognized, eliminating the need to
discover one another or to enter security features like a
common Passkey.
Creating Bluetooth Bonds
You can create a bond between your device and another
device that has Bluetooth wireless technology. Once you
dothis,Bluetoothdoesn'tneedtobeindiscoverablemode
in order for you to beam information between the two
devices; the Bluetooth radio only needs to be turned on.
To create a Bluetooth bond, follow these steps:
1. Make sure that the two devices are within range of one
another and that Bluetooth discoverable mode is enabled
on both devices.
2. Tap Start in the upper left hand portion of your screen.
3. Tap Settings, and then select the Connections tab.
4. Tap Bluetooth, and then select the Devices tab.
Section 12: Bluetooth® Services
163
5. Tap New. Your device searches for other Bluetooth
wireless technology enabled devices and displays them
in the list.
6. Tap the name of the other device you want, and then tap
Next.
7. Enter a Passkey, which should be between 1 and 16
characters, and tap Next.
Note: You must enter the same Passkey on both devices.
8. Change the name of the device associated with the bond,
if desired, and then tap Finish.
Accept a Bond
To accept an incoming bond, follow these steps:
1. Make sure that Bluetooth is turned on and the device is
discoverable.
2. When prompted to bond with the other device, tap Yes.
3. Enter a Passkey, which should be between 1 and 16
characters and must match the Passkey entered on the
originating device.
4. Tap Next.
5. Change the name of the device associated with the bond,
if desired, and then tap Finish.
164
Bluetooth Hands-free Device
Rename a Bond
The name of each bond can be changed, if necessary, by
following these steps:
1. Make sure that the two devices are within range and
that Bluetooth is discoverable on both devices.
2. Tap Start in the upper left hand portion of your screen.
3. Tap Settings, and then select the Connections tab.
4. Tap Bluetooth, and then select the Devices tab.
5. Tap the bond you want to rename.
6. In the Name field, enter a new name for the bond.
7. Tap
.
Bluetooth Hands-free Device
You can use a Bluetooth Hands-free device with your
i830.
1. Create bond between your i830 and the Bluetooth
Hands-free device. For information on creating a bond,
2. If the Hands-free device has Bluetooth wireless
technology functionality, the message “Would you like to
designate (Hands-free device name) as a hands-free
device?” displays.
3. Tap Yes to set the Hands-free as your default Hands-free
device.
Note: To change your default Hands-free device, select Start>Settings>
Connections tab>Bluetooth>Devices, then tap and hold the device you
want. Tap Set as Hands free on the pop-up menu.
Section 12: Bluetooth® Services
165
Using Bluetooth Hands-free Device
Someorallofthefeaturesbelowareavailablewhenusing
your Bluetooth Hand-free device.
1. Voice recognition using the built-in “VoiceSignal”
application.
2. Last number redial
3. Call holding and call switching
4. Caller ID display
5. End a call
6. Switching to a private call
Note: For specific information about the features available with your
Hands-free device, please refer to the manual provided with your device.
Bluetooth OBEX FTP
You can use the OBEX FTP application provided with
your i830 to exchange data with other devices with
Bluetooth wireless technology as the transport layer. The
OBEX FTP application has both a server and client
component. To use your i830 as Bluetooth OBEX FTP
server, set your i830 as discoverable, so the OBEX FTP
clientwillsearchforandautomaticallyestablishanOBEX
FTP connection.
Note: Although your i830 has both an OBEX FTP server and client
component, some devices only support the OBEX FTP client functionality.
166
Bluetooth OBEX FTP
Bluetooth OBEX FTP Server Setting
If i830 OBEX FTP client attempts an OBEX FTP
connection with a PC, Bluetooth bonding is usually
required. The default shared folder of i830 OBEX FTP
server is
“\My Documents”; however, you can adjust the OBEX
FTPserversettings,suchasauthentication,sharedfolder,
and writing permission, in OBEX FTP tab under
Bluetooth settings.
Exchanging Files via OBEX FTP Server
Whenaclientdeviceattemptstodownloadoruploadfiles
from your i830 OBEX FTP server, a dialog box displays
either, “Do you want to send?” or “Do you want to
receive?” confirmation message, depending on the
related task. In either case, tap “Yes” to confirm that you
want to uploaded or downloaded the file from your
server.
Using Bluetooth OBEX FTP Client
You can use the OBEX FTP client to exchange or delete
files and create folders on an OBEX FTP server.
Additionally, you can use Bluetooth wireless technology
or IrDA (Infrared) as the transport layer when accessing
the OBEX FTP feature.
1. Tap Start located in the upper left corner of the screen.
2. Select Programs.
3. Tap the OBEX FTP
icon.
The OBEX FTP client default screen displays with this
message, “Do you want to search OBEX FTP device?”.
Section 12: Bluetooth® Services
167
4. Tap Yes to search for OBEX FTP servers.
5. If available, a list of OBEX FTP servers near your i830 is
displayed. Bluetooth OBEX servers have a Bluetooth
icon, while IrDA OBEX servers have an IrDA
to their entries.
icon next
6. Select the OBEX FTP server with which you want to
connect, and tap the OK button.
Note: It may be necessary to create a Bluetooth bond with the OBEX FTP
server before you can connect to it.
7. When you connect, your i830 displays the available
folders and files on your screen.
Tip: If the OBEX FTP server you select has an authentication functionality,
you should set the OBEX password before making your connection. To set
the password, tap the OBEX Tool
icon, and then select Config OBEX
Password. Enter the password, and tap the OK button.
Bluetooth Virtual Serial Port
There are many Bluetooth wireless technology devices
thatsupporttheBluetoothserialprofile,suchasGPS.You
can use the i830 Bluetooth virtual serial port to make
Bluetooth serial connection with such devices.
Setting Bluetooth Virtual Serial Port
1. Create a Bluetooth bond between your i830 and the
device you want to use. For information on creating a
168
ActiveSync via Bluetooth Wireless Technology
2. If the device supports the serial port profile, this
message, “(Device) support synchronizing using
Bluetooth. Would you like to designate it as an
ActiveSync partner?” displays.
3. Tap No if you don't want to make an ActiveSync
connection via the Bluetooth Virtual Serial Port.
4. After establishing a bond with the device, tap New
Outgoing Port on “COM Ports” tab under Bluetooth
settings.
5. Select the port, and then tap OK.
Connecting a Virtual Serial Port Device
The port you selected above can now be used in other
applicationsavailableonyouri830. Forexample,youcan
choose the port for communication when using a
Bluetooth GPS application.
ActiveSync via Bluetooth Wireless Technology
To use ActiveSync via Bluetooth wireless techology, you
need to configure the settings for both your PC and your
i830.
PC Configuration
1. Add a COM port in the Bluetooth application you use on
your PC.
2. In ActiveSync, select File>Connection Settings.
3. Choose the COM port added in Step 1, and then check
“Allow serial cable or infrared connection to this COM
port.”
Section 12: Bluetooth® Services
169
PDA Configuration
1. Create a Bluetooth bond between your i830 and your PC.
2. Tap Yes in the Bluetooth ActiveSync dialog box that
displays, “(Your PC) supports synchronizing using
Bluetooth. Would you like to designate it as an
ActiveSync partner?”
3. Select Start>ActiveSync.
4. Select Tools, then tap “Connect via Bluetooth.”
Using Bluetooth Keyboard
Your i830 supports the Bluetooth HID (Human Interface
Device)profileforoptionalkeyboards.TouseaBluetooth
wireless technology enabled keyboard, follow these
steps:
1. Create a Bluetooth bond between your i830 and the
Bluetooth keyboard. (Refer to the keyboard’s manual for
specific instructions on how to establish a bond with the
device.)
2. Select Start>Settings>Connections>Bluetooth>HID tab.
The device name for the keyboard displays on this
screen.
3. Tap and hold the device name, and then select Connect
to establish an HID connection between your i830 and
the keyboard.
4. To disable the keyboard, tap and hold the device name
again, and then select Disable.
170
Accessories
Your i830 supports many accessories that make your
phone truly unique. You can use your phone as a remote
control for other electronic devices, such as a TV or VCR,
oryoucanaddanoptionalHandsFreeKittoallowyouto
operate your phone while you drive, andyourphonehas
a built-in infrared (IR) port to allow you to transmit files,
contacts, or download information from other
compatible devices.
Remote Control
The Remote Control software is a Universal Remote
Control Program with a pre-defined RC database and
self-teach/learn mode. It consists of 5 profiles that
include, TV, DVD, VCR, Audio and Other. Each profile
can have up to 32 keys or functions so you can use your
PDA’s hardware keys or touch screen to navigate and
control each individual device.
This application turns your i830 phone into a universal
remote that lets you wirelessly control your infrared (IR)
controlled devices. One unit that replaces all of your
remote controls.
Launch RC Program
To launch the Remote Control application, follow these
steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Remote Control. The Remote Control application
displays the last device or profile used.
172
Remote Control
Note: To display the Remote Control Home Screen, tap the
icon at the
top of the current device. To select a different device, tap the current
device name to display a drop down menu of all devices available.
Add a Device
Before you can use your remote control program to
control a device, you must add the device. The 5 profiles
enable you to add a device, either by brand, which are
listed in the database for each pre-defined profile, or by
selecting self-learn where the device is set up using the
Learn feature described below.
Add by Brand
1. Launch the Remote Control application.
2. Tap Options, then select Add device.
3. Tap By brand, then select the type of device you are
adding. The Add device wizard displays. Choose one of
the following:
• TV, DVD, VCR and Audio
4. Select a device from the brands listed.
5. Tap Done to exit.
Add by Self-learn
1. Launch the Remote Control application.
2. Tap Options, then select Add device.
3. Tap Self-learn. The Add device by self-learn wizard
displays.
4. Tap Next, then enter the name for your device.
Section 13: Accessories and Games
173
5. Tap Done to exit. The device is added to the Other
profiles. For information about the how to program each
Delete a Device
To remove a device, follow these steps:
1. Launch the Remote Control application.
2. Display the Remote Control Home Screen, if necessary.
3. Tap Options, then tap Delete device.
4. Highlight the device you want to delete from the Delete
device screen, then tap Delete.
5. Tap Yes to confirm that you want to delete the device.
The Delete Device screen displays.
Reset All Devices
To remove all devices added to your profile at the same
time, follow these steps:
1. Launch the Remote Control application.
2. Display the Remote Control Home Screen, if necessary.
3. Tap Options, then tap Reset all. The Reset device
confirmation screen displays.
4. To remove all of the devices you have added, tap Yes or
tap No to cancel.
Note: Removing devices or selecting Reset all does not remove the device
profiles stored in the pre-defined product databases. However, if you add a
device using Self-learn and then remove it, you will have to repeat the
learning and programming steps each time you add the device to your
profiles.
174
Remote Control
Programming Self-learn Devices
When you add devices using Self-learn, you must
program or use the built-in learn feature to setup or teach
your remote how to control a device. To use the built-in
learn feature, follow these steps:
1. Launch the Remote Control application.
2. Display the Remote Control Home Screen, if necessary.
3. Add a device using the Add by Self-learn feature
described in “Add a Device” above.
4. After adding a device, tap Other on the Remote Control
home screen. If the device you want does not display,
tap the current device name to display a drop down list
of all devices available.
5. Select the device you want, then tap any key to begin.
Follow the onscreen prompts to program the keys and
functions defined on the default Self-learn profile.
It’s possible that the default profile created when the Self-
learn option is used provides keys you don’t need or,
more likely, doesn’t provide a key for a specific feature or
function you do want to be able to control. In either case,
youhavetheoptionofaddingordeletingkeystosuityour
needs. You can even move the keys around if necessary.
The sections that follow describe how to modify your
remote control profiles.
Section 13: Accessories and Games
175
Adding Keys
Once you have performed the steps in "Programming
Self-learn Devices" on page 175 above, you can add other
keys or functions to a profile.
Note: If you try to add keys before programming a device profile, then the
self-learn feature automatically starts when you select “Add key” from the
Options menu.
To add a key to a profile, select the device you want, and
then follow these steps:
1. Tap Options at the bottom of the current selected device
profile.
2. Tap Add key. A pop up message displays that says to
select a blank space for the new key.
3. After the Select Key list displays, highlight the key or
function you want to add. Use the scroll bar to view the
entire list, if necessary.
4. Tap Done. If the key or function already exists in the
profile, a pop up message displays. You can either select
another key or function to add or select Cancel to exit.
Deleting Keys
Todeleteakeyinaprofile,selectthedeviceyouwant,and
then follow these steps:
1. Tap Options at the bottom of the current selected device
profile.
176
Ringtone Manager
2. Tap Delete key. A pop up message displays that says to
tap the key you want to delete.
3. Tap Yes to confirm that you want to remove the key. The
key is removed and the device profile displays.
Moving Keys
Tomoveakeyinaprofile, selectthedeviceyouwant, and
then follow these steps:
1. Tap Options at the bottom of the current selected
device profile.
2. Tap Move key. A pop up message displays that says to
select the key you want to move.
3. Tap the key you want to move, then select a blank space
where you want to move the key to.
4. Tap Yes to confirm. The key is moved and the Device
Remote screen displays.
Ringtone Manager
The Ringtone Manager application allows you to easily
manageallofyourpreloadedanddownloadedringtones
byplacingthemintoeitherthedefaultcategoriesdefined
by the application or by grouping your ringtones into
categories you decide to add.
With the Ringtone Manager, you can:
• Play and review any stored ringtone. These formats are
supported:
• wma/mp3
• MIDI Types:
– MIDI
Section 13: Accessories and Games
177
– XMF, Mobile XMF
– Mobile DLS
• Legacy Types:
– RMF
– iMelody, RTTTL, RTX
– SMAF MA1, MA2 & MA3 compliant
• Set a tone as your phone’s ringtone
• Move ringtones from one category to another
• Add, rename, or delete ringtone categories
Launching Ringtone Manager
To launch Ringtone Manager, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap the Ringtone Manager
icon. The application
screen displays.
Previewing Ringtones
To preview a stored ringtone, follow these steps:
1. Launch Ringtone Manager.
2. Tap and hold the ring tone to which you want to listen. A
pop-up menu displays.
3. Tap Play or press the center key on the navigation key.
4. To stop playing the ring tone, tap and hold the ring tone
again, then select Stop from the pop-up menu or press
the center key again to cancel.
178
Ringtone Manager
5. To review a history of the ringtones you have set as a
default, tap the current ringtone displayed at the bottom
of your screen.
A pop up menu displays listing all previously selected
default ringtones.
Setting Your Phone’s Ringtone
To change the ringtone played when you receive an
incoming call, follow these steps:
1. Launch Ringtone Manager.
2. To review the ringtone, tap Current next to the ringtone
name.
3. To set a different ringtone, select the ringtone category
with the ringtone you want.
Note: To change between categories, tap the Category Bar to display a
drop-down menu and then tap the category you want. You can also tap
either the right or left arrows in the Category Bar to move to the next
category in the list.
4. Tap and hold the ringtone to display a pop-up menu.
5. Tap Set as Ringtone to set the file you selected as your
current ringtone.
Note: Alternatively, you can also highlight the ringtone you want to set as
your default, tap Menu at the bottom of your screen, and then tap Set as
Ringtone.
Creating Ringtone Categories
There are three default categories for Ringtone Manager,
which are:
Section 13: Accessories and Games
179
• Basic
• Cheerful
• Mood
Whenyouselectacategory,alistofringtonesdisplays.To
add other categories to Ringtone Manager, follow these
steps:
1. Launch Ringtone Manager.
2. Tap Menu, and then tap Edit Category. A list of the
current categories displays.
3. Tap New, and then enter the name of the category in the
Category Name field.
4. Tap OK to add the category to Ringtone Manager.
Moving Ringtones Between Categories
To move ringtone files between categories, follow these
steps:
1. Launch Ringtone Manager.
2. Tap Menu, and then tap Move Category. A list of the
current categories displays.
3. Tap the category you want to move the ringtone to, then
tap OK.
Renaming or Deleting a Category
You can change the name or delete any of the categories
listed in Ringtone Manager.
To edit or rename a category, follow these steps:
1. Launch Ringtone Manager.
180
Beam
2. Tap Menu, and then tap Edit Category. A list of the
current categories displays.
3. Tap the category you want to rename, then tap the
Rename button.
4. Re-enter the category name, and then tap OK.
To delete a ringtone category, follow these steps:
1. Launch the Ringtone Manager application.
2. Tap Menu, and then tap Edit Category. A list of the
current categories displays.
3. Tap the category you want to delete, then tap the Delete
button.
4. When the confirmation pop-up displays, tap OK to delete
the ringtone category.
Beam
Your i830 can receive and transmit files using its built-in
infrared (IR) port. However, you must set your i830 to
accept incoming beams before receiving files.
Note: You cannot receive incoming IR beams unless you set your i830 to
accept all incoming beams.
Accepting Incoming Beams
To set your i830 to accept all incoming IR beams, follow
these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings.
3. Tap the Connections tab.
Section 13: Accessories and Games
181
4. Tap the Beam icon.
5. To exit, check the checkbox before contents of 'Receive
all incoming beams' on display, tap
.
Sending a Beam
You can beam contacts, documents, tasks, workbooks,
and even pictures to other devices that are IR capable. To
send an IR beam to another device, you must align the IR
portsofbothdevices,andthenselect“Beam . . .”fromthe
appropriate menu. See the appropriate sections that
follow for specific details on beaming files to another
device.
SD I/O Expansion Slot
TheSDI/OSlotontherightsideofthei830isforusewith
an SD (secure digital) card. SD cards come in a variety of
sizes and can hold up to 1 GByte of data. Download and
use applications, games, and more using the enhanced
storage capacity of the SD card.
Tip: The SD Slot is an I/O port that supports both input and output SD
peripherals.
Transfer data to the SD Card from your Computer
1. Insert the SD Card (label side up) into the slot on the right
side of the i830. The beveled edge should be facing
toward the top of the phone.
2. Insert the i830 into the desktop cradle and synchronize
the device with your PC via ActiveSync.
3. Open Windows Explorer then highlight the application or
folder that you wish to transfer to the SD Card.
182
SD I/O Expansion Slot
4. Highlight and copy the file(s) or folder(s) to your
computer’s clipboard.
5. Using the ActiveSync menu, click the Explore icon to
open the My Pocket PC folder.
6. Double-click on the My Pocket PC folder.
7. Double-click the Storage Card folder to open. Any
contents of the SD Card appear in the display.
8. Locate the folder or sub folder where you wish to paste
the files that you’ve copied.
9. Press Ctrl-V on your computer to paste the files or
folders on your computer’s clipboard to the i830 SD
Card.
Use the SD Card
Once you’ve transferred files from your computer to the
SD Card using ActiveSync, you can access games or
applications that have been transferred to your SD Card.
For example, if you’ve transferred any multimedia files
onto your SD Card that are compatible with Windows
Media Player, simply open Windows Media Player and
selectthemediafilethatyouwishtoplay.Thereisnoneed
to look or browse your phone for the SD Card. The SD
Card is recognized when it is installed.
Remove the SD Card
1. Press in on the card with your fingernail until you hear a
click, then quickly release. The card pops out of the slot
approximately one quarter of an inch.
Section 13: Accessories and Games
183
2. Grasp the exposed section of the card and pull it out with
your fingers.
Games
Therearetwogamesincludedwithyouri830.Jawbreaker
and Solitaire are listed in the Games folder under
Programs. You can download other games and add these
toyourGamesfolderoryoucanpurchasemanygameson
optional memory cards that can be used on your Pocket
PC.
Jawbreaker
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Games, then select Jawbreaker.
4. Tap Game and then select New Game to begin play.
5. Tap Game and then tap Options to display the options
screen for the game.
6. Change the options you want and then press
to
return to the game.
Note: Pocket PC games can be downloaded from the Internet and stored on
your Pocket PC or SD Card. Instructions from the game download site
should inform you of the location (folder) in which to store the application
on your Pocket PC.
Solitaire
1. Tap Start located in the upper left corner of the screen.
2. Tap Programs.
3. Tap Games, then select Solitaire.
184
Games
4. Tap New to display a new game. Play is ready to begin.
5. Select Tools and then tap Options to display the options
screen for the game.
6. Change the options you want and then press
to
return to the game.
Section 13: Accessories and Games
185
186
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Yourwirelessphoneisaradiotransmitterandreceiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government. TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The
FCC requires wireless phones to comply with a safety
limit of 1.6 watts per kilogram (1.6 W/kg). The FCC
exposurelimitincorporatesasubstantialmarginofsafety
to give additional protection to the public and to account
for any variations in measurements.
188
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands. AlthoughtheSARisdetermined
atthehighestcertifiedpowerlevel,theactualSARlevelof
the phone while operating can be well below the
maximumvalue. Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body)asrequiredbytheFCC. Body-wornoperationsare
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its antenna (whether extended or
retracted)andtheuser'sbody. Non-compliancewiththe
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 14: Health and Safety Information
189
• Head: 1.17 W/Kg.
• Body-worn: 0.367 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio
frequency energy (RF) because of the short distance
between the phone and the user's head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed with
the advice of FDA and other federal health and safety
190
Consumer Information on Wireless Phones
agencies. When the phone is located at greater distances
from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
"cordless phones," which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF
can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects
causesnoknownadversehealtheffects. Manystudiesof
low level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have not
been confirmed by additional research. In some cases,
other researchers have had difficulty in reproducing
those studies, or in determining the reasons for
inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
Section 14: Health and Safety Information
191
phones before they can be sold, as it does with new drugs
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
192
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposurescharacteristicofwirelessphoneshaveyielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. OtherstudiesexposedtheanimalstoRFforup
Section 14: Health and Safety Information
193
to22hoursperday. Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
Acombinationoflaboratorystudiesandepidemiological
studies of people actually using wireless phones would
providesomeofthedatathatareneeded. Lifetimeanimal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
datathatisdirectlyapplicabletohumanpopulations,but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
theydo-maybemany, many years. Theinterpretationof
epidemiological studies is hampered by difficulties in
194
Consumer Information on Wireless Phones
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project
has also helped develop a series of public information
documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research
on wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 14: Health and Safety Information
195
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But
if you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdatadonotdemonstratethatwireless
phonesareharmful. ButifyouareconcernedabouttheRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
196
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wi re l es s ph on es at a l l. Fo r e xa mpl e, t he g o ve rnm ent i n t he
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumorsorotherilleffects. Theirrecommendationtolimit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone,whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
theheadoragainstthebody. Eitherconfigurationshould
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 14: Health and Safety Information
197
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks. Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone. Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
anddefibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
198
Consumer Information on Wireless Phones
voluntary standard sponsored by the Institute of
ElectricalandElectronicEngineers(IEEE). Thisstandard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactionswith other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha-slc.gov/index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/en/
• International Commission on Non-Ionizing Radiation
Protection(ICNIRP):
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation/
Section 14: Health and Safety Information
199
• US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
200
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in emergencies.
If you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
Section 14: Health and Safety Information
201
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association
Operating Environment
Remember to follow any special regulations in force in
anyareaandalwaysswitchyourphoneoffwheneveritis
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommendedthattheequipmentshouldonlybeusedin
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
202
Using Your Phone Near Other Electronic Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wishtoconsultyourhearingaidmanufacturertodiscuss
alternatives.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
Section 14: Health and Safety Information
203
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
requireyou to do so.
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosiveatmosphereandobeyallsignsandinstructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
204
Emergency Calls
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone, operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Section 14: Health and Safety Information
205
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
206
Other Important Safety Information
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air
bag inflates with great force. Do not place objects, including
both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
Section 14: Health and Safety Information
207
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
208
Availability of Various Features/Ring Tones
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Notallfeaturesareavailableforpurchaseor use
in all areas. Downloadable Ring Tones may be available
at an additional cost. Other conditions and restrictions
may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
Section 14: Health and Safety Information
209
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
210
Care and Maintenance
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options
for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
Section 14: Health and Safety Information
211
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
212
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
Other Phone Accessories 1 Year
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
214
Standard Limited Warranty
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase,theserialnumberof
Product and the sellers' name and address. To obtain
assistanceon where todeliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNGwillpromptlyrepairorreplace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
Section 15: Warranty Information
215
equal to the remainder of the original Limited Warranty
on the original Product or for 90 ays, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
216
Standard Limited Warranty
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND
RESULTINGFROMTHEPURCHASE,USE,ORMISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISINGDIRECTLYORINDIRECTLYFROMTHEUSE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES,ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGESARISINGFROMANYTORT(INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.THISWARRANTYGIVESYOUSPECIFICLEGAL
Section 15: Warranty Information
217
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THEORIGINALPURCHASEROF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATEANYSUCHSOFTWAREOREQUIPMENT
WITHTHEPRODUCT. THEQUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
218
Standard Limited Warranty
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitationsofliabilitycontainedinthisLimitedWarranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
Fax: 972.761.7001
©2005 Samsung Telecommunications America, L.P. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Section 15: Warranty Information
219
220
ments 140
Index
Call barring 107
Call forwarding 108
Call Functions 33
Answering a Call 37
Call History 38
A
Action key 22
Answering Calls
Making a Call 34
Roaming 41
Your Phone Number 38
answer call waiting 157
Applications
deleting 134
Call History
installing 134
Media Player 131
memory adjustments
creating contact 39
deleting history 39
options 39
placing a call 38
sending messages 40
Call Tab (GSM) 111
Call waiting 109
Caller ID 108
Pocket Excel 128
Pocket IE 124
Pocket Word 126
B
Back key 22
Battery
Contacts 67
capacity 30
charging 30
checking charge 30
install 28
adding contact 69
adding notes 72
beam via IR 71
deleting contact 70
deleting notes 72
finding contact 69
making calls 70
speed dialing 73
remove 29
Beam
accepting beams 181
sending beams 182
Bluetooth 159
D
About 160
Digit dial
C
adapt to your voice 46
reset adaptation 47
tips for adapting 46
Calendar
changing views 142
scheduling appoint-
221
Dormant mode
canceling 131
I
i830
definition 130
buttons setting 90
E
Icon
Entering Text 61
1X data protocol 26
bluetooth status 27
charging 25
data session 26
flight mode 25
Expansion
SD card removal 183
SD card transfer data
SD card use 183
SD slot 182
GPS 25
missed call 26
new text message 26
new voicemail 26
ringer off 25
G
Games
jawbreaker 184
ringer on 25
solitaire 184
ringer vibrate 25
roaming mode 26
signal strength 25
speakerphone mode 27
voice privacy 27
Getting Started 11
Activating Your Phone 12
Understanding this User
Manual 14
Voicemail 12
Icons, list of 25
K
GSM 35
Call the U.S. from another
country 35
Calling Internationally
from another country 35
Key
action 22
back 22
Send 22
voice memo 23
volume 23
GSM only features
call forwarding 108
call waiting 109
M
caller ID 108
Making Calls
H
one-handed dialing 36
Health and Safety Infor-
mation 187
using softkeys 34
Media Player
controls 132
222
launching 131
load files 131
Menu Navigation 49
Personal Organizer 137
Alarm 151
Messaging 77
Calculator 151
Calendar 140
accounts 80
e-mail setup 85
Task List 144
my text editing 84
my text messages 82
text messages 81
Types of Messages 78
using Outlook 85
Today Screen 138
Phone mode, switching 35
Phone Tab (GSM) 106
Pocket Excel
beam a workbook via IR
Mode
switching 35
create a workbook 129
delete a workbook 129
MSN Messenger
adding buddies 121
end chat session 123
inviting others to chat
Pocket Internet Explorer
launching 124
saving favorites 125
Pocket Word
attach recordings 127
beam documents via IR
login 120
start chat session 122
N
Network Services 155
Call Forwarding 156
Call Waiting 157
delete documents 128
new document 126
options 127
Caller ID 157
R
Network Tab (GSM) 111
Remote Control 172
Remove SIM card 28
Ringtone Manager 177
Roaming
Definition 41
options 41
Notes
deleting 150
options 150
recording 148
recording a call 149
writing 150
S
P
Security
Personal Digital Assitant
223
changing password 98
locking device 23
special numbers 104
unlocking device 24
Bluetooth status 140
date and time 138
Security Tab (GSM) 112
U
Settings 89
i830 Settings 90
Phone Settings (CDMA)
UnderstandingYourPhone
Battery 28
Command Keys 21
Front View 17
Phone Features 16
Phone Settings (GSM)
Sound Settings 92
V
SIM card
Voice signal
call 43
removing 28
SMS Tab (GSM) 111
Speakerphone, use in call
digit dial 45
looking up a contacts 47
name dial 44
open an application 48
Voice signal menu 42
Voicemail
Standard Limited Warran-
ty
Standard Limited War-
ranty 214
checking (CDMA) 13
checking (GSM) 14
setup (CDMA) 13
setup GSM 13
T
Tasks
beaming via IR 147
creating 144
deleting 147
Volume Settings
turning ringer off 97
editing 146
W
entry bar 146
marking complete 145
options 145
Warranty Information 213
Tips
for digit dial 46
Today Screen
224
|