Samsung SCH R330 Series User Manual

SCH-R330 Series  
P O R T A B L E  
M O B I L E  
User Manual  
D U A L - B A N D  
P H O N E  
Please read this manual before operating your  
phone, and keep it for future reference.  
Printed in Korea.  
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its  
affiliates in the United States and/or other countries.  
®
Openwave is a registered Trademark of Openwave, Inc.  
®
RSA is a registered Trademark RSA Security, Inc.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
®
Using T9 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
1
Section 9: easyedgeSM ..................................................51  
SM  
Accessing easyedge  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Please Note the Following Information When Using  
FCC Hearing-Aid Compatibility (HAC) Regulations  
2
Section 1: Getting Started  
This section explains how to start using your SCH-r330 phone.  
Understanding this User Manual  
The chapters of this guide generally follow the same order as the  
menus and sub-menus in your phone.  
highlight UsetheNavigationkey(  
)tomoveahighlighting  
effect onto a menu item or screen item of interest.  
select  
After “highlighting” a menu item or screen item,  
A robust index for quick reference to most features begins on  
press the OK key  
to launch, access, or save a  
highlighted menu item or screen field of interest.  
Important safety information that you should know before using  
your phone is near the back of the guide, beginning on page 76.  
Used in place of “select” in long “drill down”  
procedure steps.  
Notes and Tips  
Example: “...Settings  
Call Settings  
Call Answer...”  
Throughout this manual, the following labels point out important  
information, quick methods for activating features, and more:  
Installing the Battery  
Notes: Explain alternative options within the current feature, menu, or  
sub-menu.  
Note: Your phone comes packaged with a partially charged rechargeable  
Tips: Provide quick or innovative methods for performing functions  
related to the subject at hand.  
standard Li-Ion battery and travel adapter.  
Important: Points out important information about the current feature  
that could affect performance, or even damage your phone.  
Important!: You must fully charge the battery the first time you use your  
phone, otherwise you could damage the battery.  
Text Conventions  
To condense information in this manual, the following terms and  
icon appear in procedural steps:  
Getting Started  
4
                 
Charging the Battery  
Your phone is powered by a rechargeable standard Li-Ion battery.  
Only use Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Use  
of other accessories may invalidate your warranty and may  
cause damage.  
Use the Travel Adapter  
Removing the Battery  
The travel adapter rapidly charges your phone from any 120/220  
VAC outlet.  
Caution!: The display on your handset is made of glass or acrylic and could  
break if your handset is dropped or if it receives significant impact  
or excessive pressure, which could void the warranty (For more  
not use if screen is broken or cracked as this could cause injury to  
you.  
1. Plug the large end of the Travel Adapter into a standard  
120 VAC or 220 VAC wall outlet.  
Important!: For connection to an electrical supply not located in North  
America, you must use an adaptor of the proper configuration for  
the power outlet. Use of the wrong adapter could damage your  
phone and void your warranty.  
Important!: You must unplug the adapter before removing the battery from  
the phone during charging to avoid damage.  
5
       
2. Insert the smaller end of the Travel Adapter into the  
charger/accessory connector on the lower right side of  
your phone.  
Activating Your Phone  
Contact your Wireless Carrier and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
Turning Your Phone On  
1. With the phone open, press the  
key until the display  
Incorrect  
lights.  
Correct  
Note: As with any other radio-transmitting device, do not touch the antenna  
while using your phone as this can affect call quality and can cause the  
phone to operate at a higher power level than is necessary.  
Important!: You must unplug the adapter before removing the battery from  
the phone during charging to avoid damage.  
2. The phone begins searching  
for a network signal. Once  
the phone finds a signal, the  
time, date, and day appear  
near the top of the display.  
You’re now ready to place  
and receive calls.  
Low battery indicator  
The battery indicator (  
) in the upper-right corner of the  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
Five bars (  
) indicate a full charge.  
An empty battery icon (  
) indicates a near empty battery.  
) and a tone sounding indicate you  
Note: If you are outside of your carrier’s  
A blinking empty battery icon (  
coverage or roaming area, the No  
Press  
& Hold  
Service icon (  
) appears at the  
have two to three minutes before the battery is too low to operate the  
phone.  
top of the phone’s display. If you  
cannot place or receive calls, try  
later when service is available, or at  
another location.  
Internal  
Antenna  
If you continue to use your phone without charging its battery, the  
phone will shut down.  
Getting Started  
6
     
Turn Your Phone Off  
With the phone closed, press and hold the  
or more seconds. Your phone powers off.  
key for two  
Note: If your phone is on and you press  
for less than one second, the  
phone will not power off. This prevents your phone from being turned  
off accidentally.  
Setting Up Your Voicemail  
Voicemail allows callers to leave voice messages, which can be  
retrieved any time.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Message menu) to view details of voice  
messages in your Voicemail box.  
1. In Standby mode, press and hold the  
key or dial your  
own mobile number to dial Voicemail.  
2. Follow the prompts in the new user tutorial to setup your  
mail box.  
Listen to Voicemail  
1. In Standby mode, press and hold the  
key or dial your  
own mobile number to dial Voicemail. After connecting,  
you will hear your voice greeting.  
2. You are prompted to enter your password.  
7
   
Section 2: Understanding Your Phone  
This section lists some important features of your phone and  
describes the keys and the screen format.  
Closed View of Your  
Phone  
Features of Your Phone  
Domestic and international voice and text messaging service (available  
on participating networks).  
Features  
1. Volume Key — Lets you  
adjust the ring volume in  
Standby mode, adjust the  
voice volume during a call,  
or mute the ringer during  
an incoming call.  
®
Bluetooth Stereo (v2.1) Wireless Technology (see Note)  
Global Positioning (GPS) Technology  
Personal Information Management (PIM) Functions  
Picture (MMS) Messaging  
Text (SMS) Messaging  
2. Camera Lens — The lens  
of your built-in camera.  
Built-in 1.3 Megapixel Digital Camera  
Voice Dial  
3. Front Display — Indicates  
the status of your phone,  
Speakerphone  
including status icons, message indicators, signal  
strength, and so on.  
Note: The SCH-r330 supports the wireless Handsfree Profile (HFP) and OBEX  
profiles for Bluetooth® wireless technology. The SCH-r330 does not  
support the Bluetooth serial port profile.  
Understanding Your Phone  
8
         
4. Headset Jack — Used to  
connect an optional  
headset (for hands free  
operation) or optional TTY  
device.  
Open View (Front) of  
Your Phone  
Features  
1. Main Display  
4
5
Indicates the status of  
your phone, including  
numbers dialed,  
feature and function  
screens, status icons,  
message indicators  
and contents, signal  
strength, and so on.  
5. Camera Key — Launches  
the Camera feature of your  
phone and takes photos.  
6. Power / Accessory  
Connector — Used to  
connect charging  
6
accessories or optional  
accessory cables to your  
phone.  
2. Navigation Key — In  
Menu mode, lets you  
scroll through the  
phone menu options.  
In Standby mode, lets  
you access preset  
functions and one  
user-defined function.  
9
   
3. Left Soft Key — Used  
to navigate through  
menus and  
7. Microphone — Lets the other caller hear you clearly when  
you are speaking to them.  
8. Voice Recognition Key — Used to launch VoiceSignal voice  
applications and to  
select the choice  
indicated at the  
bottom left corner of  
the Main LCD.  
recognition system.  
9. Alpha-numeric Keys — Use these keys to enter numbers,  
letters, and characters.  
10. END Key — Ends a call. If you press and hold the END key,  
the power goes On or Off. When you receive an incoming  
call, press to send the call to voicemail.  
4. SEND Key — Lets you  
place or receive a call.  
In Standby mode,  
press the key once to  
access the recent calls  
log.  
11. CLR Key — Deletes characters from the display when you  
are in text entry mode. Press this key to return to the  
previous menu or screen when navigating features on your  
phone.  
12. Right Soft Key — Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom right corner of the Main Display.  
5. Voicemail Key — Lets  
you speed dial your  
Voicemail account to  
review your voice  
messages.  
13. OK Key — Pressing when navigating through a menu  
accepts the highlighted choice in a menu.  
14. Earpiece / Speaker — Lets you hear ringing and alert  
6. Special Function Keys  
— Enter special  
tones, alarm tones, and the other parties to calls.  
characters. Perform  
various functions.  
Understanding Your Phone  
10  
Display Screen Icons  
Understanding the Display Screen  
1. Icons indicating network  
Your SCH-r330 phone can show you definitions of the icons that  
appear on the top line of the display.  
1
and phone statues. (For  
more information, refer to  
“Display Screen Icons” on  
2
3
4
5
To access the Icon Glossary:  
In Standby mode, press Menu, then select Settings ➔  
Phone Info Icon Glossary. A list appears showing all of  
the icons that can appear on the top line of the display.  
2. Icon indicating that Auto  
Answer function is active.  
Dialogue Boxes  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Dialogue boxes and their  
definitions are outlined below.  
6
3. Current day of the week, date, and time.  
Choice  
4. The center of the screen shows information such as call  
progress indicators, messages, photos, and, in Standby  
Mode, Navigation key shortcut icons. (For more  
Example: “Save Message?”  
Reconfirm  
Example: “Erase All Messages?”  
Performing  
5. This line shows the text Banner. (For more information,  
Example: “Sending...” “Connecting...”  
Completed  
6. The bottom line of the display shows current soft key  
Example: “Message Saved”  
functions. In sample screen, pressing the Left soft key will  
Information  
show the Messages menu screen, pressing Menu  
(
) will  
Example: “New Message”  
display the Main Menu screen, and pressing the Right soft  
key will show the Contacts Find screen.  
11  
       
Error  
Example: “System Error!”  
Warning  
Example: “Low Battery,” “Memory Full!”  
Backlights  
Backlights illuminate the displays and the keypad. When you  
press any key or open the phone, the backlights come on. They  
go off when no keys are pressed within a period of time set in the  
Backlight menu.  
Note: During a phone call, the display backlight turns off after 10 seconds to  
conserve battery power, regardless of the Backlight setting.  
Understanding Your Phone  
12  
Section 3: Menu Navigation  
This section explains the menu navigation for your phone.  
Menu Navigation  
Navigation Key Shortcuts  
In Standby mode, press the Navigation key Up or Down to launch  
the corresponding applications in the pattern shown here.  
Access the menus and sub-menus in your phone using the  
Bluetooth*  
Navigation key (  
shortcut.  
) and soft keys (  
), or use a  
1. In Standby mode, select Menu. The first of several menus  
Camera*  
Messages*  
appears in the display.  
2. Use the Navigation key to browse through the menus.  
easyedgeSM*  
3. Press  
to enter the menu or sub-menu that appears in  
the display.  
*
Menu Shortcuts  
Use shortcuts to quickly access menus and sub-menus. Select  
Menu, then press the number to the left of the menu label to  
jump to the desired menu, sub-menu, or feature.  
Shortcut Icons  
In Standby mode, a pattern of four of the following icons indicate  
the current Shortcut Key assignments:  
Return to the Previous Menu  
easyedgeSM  
Messages  
My Images  
Camera  
Calculator  
Tip Calculator  
Converter  
Calendar  
Press Back to return to a previous menu.  
When Back does not appear in the display, press  
previous menu.  
to return to the  
Example: To jump to the Outbox sub-menu from Standby mode, select Menu  
then press (for Messages) and for Outbox.  
,
13  
           
My Ringtones  
My Sounds  
Inbox  
Alarm Clock  
Stop Watch  
Bluetooth  
Tools  
Menu Navigation  
14  
Section 4: Entering Text  
®
This section outlines how to enter text using the phone keypad.  
This section also describes how to use the T9 predictive text  
entry feature to reduce the number of key strokes needed to  
enter text.  
Using T9 Mode  
T9 Word recognizes commonly used words matching the  
numeric sequence of key presses and inserts the word into your  
message. Text entry using T9 Word is much faster than the  
traditional method (Abc) and requires only one key press per  
letter of the word.  
Text Entry Modes  
Changing the Text Entry Mode  
For example, to enter the word “Samsung”, press each of the  
following keys only once:  
In any text entry screen or field, the current text entry mode  
(T9word, T9Word, T9WORD, abc, Abc, ABC, 123, or Symbols)  
is shown in the lower left of the display. To change the text entry  
mode:  
S
A
M
S
U
N
G
Press the Left soft key to scroll through available text entry  
modes.  
If more than one word shares the same numeric sequence, T9  
Word inserts the most commonly used word, and displays any  
additional words in a pop-up menu where you can select the  
desired word.  
• T9 Word — Press each phone key only once to enter the letter of  
the word that you’re spelling. The phone recognizes common  
words from the keys pressed.  
• Abc — Enter letters, numbers, and symbols by repeatedly pressing  
each phone key until the desired character (as shown on the key)  
appears in the display.  
To switch to T9Word while composing a text message,  
press the Left soft key, then select T9Word.  
• 123 — Enter numbers by pressing the corresponding keypad keys.  
• Symbols — Using the phone keypad, enter a symbol into your  
message by pressing the number next to the symbol in the Symbols  
pop-up window.  
Note: To enter a space, press the  
key. To enter a period, press the  
key. These key functions apply to both T9 Word and Abc modes. (For  
15  
             
Adding Words to the T9 Word Dictionary  
1. To switch to 123 mode while composing a text message,  
press the Left soft key, then select 123  
.
If pressing the keys corresponding to a word you want to enter  
does not display that word, do the following:  
2. Enter numbers while in 123 mode by pressing the key  
labeled with the desired number.  
1. Press the Left soft key and select Add T9 Word  
2. Enter the word you want to add to the T9 Word dictionary,  
then press . The word is added to the T9 dictionary.  
.
Entering Symbols  
Enter symbols such as “@” or “%” into a text message.  
1. To switch to Symbols mode while composing a text  
Note: In Add T9 Word mode, you enter a word using the same multiple  
message, press the Left soft key, then select Symbols  
.
keypress method as when in Abc text entry mode.  
2. The first of three symbol screens is displayed. Use the Left  
Using Abc/ABC Mode  
and Right soft keys and Navigation key to browse the list.  
Abc mode enters characters with the first character of each word  
capitalized. ABC mode enters characters as all capitals.  
3. Select a symbol to enter it in your message text.  
4. To insert additional symbols into your message, repeat  
1. To switch to abc, Abc, or ABC mode while composing a text  
Steps 1 through 3.  
message, press the Left soft key, then select Abc or ABC  
.
2. Enter characters while in abc, Abc, or ABC mode by using  
the keypad:  
Press the key repeatedly until the desired character appears in the  
display (for example, press once for “G” and twice for “H”).  
Pause briefly and the displayed character is accepted and inserted  
into your message.  
Press  
to enter a space and press  
to enter a period.  
Using 123 Mode  
Enter numbers into a text message while in 123 mode.  
Entering Text  
16  
         
Section 5: Call Functions  
This section provides procedures for making and answering  
calls, and for reviewing your call time.  
Note: You can define up to 3 emergency numbers in your phone. (For more  
Making a Call  
1. In Standby mode, enter an area code and a phone number.  
2. Press  
.
2. To make the call, press  
. (Adjust the volume with the  
Tip: If you need to make an emergency (911) call with Airplane mode  
enabled, just dial the emergency number and press  
. (For more  
Volume key.)  
3. To end the call, press  
.
3. To exit Emergency mode, press  
. You are prompted to  
Tip: To re-dial your last call, press  
twice.  
, highlight a call, and press  
confirm that you want to exit Emergency mode.  
To re-dial other recent calls, press  
again.  
4. To confirm that you want to exit Emergency mode, press  
Yes.  
Emergency Calls  
Three-Way Calling  
When you call an Emergency Number, such as 911, your SCH-  
r330 phone locks itself in Emergency mode, only allowing you to  
make calls to the emergency call center you originally contacted.  
This lets emergency operators more easily dispatch aid, such as  
police, fire fighters, and emergency medical personnel.  
During a call, Three-Way Calling lets you call a third party and  
connect them to your existing call.  
1. During a call, ask the other party to remain on the line.  
2. Enter a third party’s phone number and press  
.
3. When the third party answers, press  
to connect all  
1. In Standby mode, enter the Emergency Number you wish  
parties to the same call.  
to call.  
17  
       
Dialing International Numbers  
Call Another Country — Manual Method  
Tip: If you place most or all of your international  
calls to numbers in the same country, set-up  
the International Dialing shortcut to dial that  
1. In Standby mode, enter 011 (the three-digit exit code for  
the United States).  
2. Enter the country code for the country that you are calling.  
Note: When you press  
, your phone  
automatically replaces the second + with the  
two-digit country code you have selected for  
the International Dialing shortcut.  
3. Enter the number that you wish to call, then press  
.
Note: Puerto Rico and Canada are on the North American dialing plan.  
Making calls to Puerto Rico and Canada is similar to making calls  
within the United States, no unique country codes are necessary.  
3. Enter the number that you wish to call, then press  
.
Manual Pause Calling  
Call Another Country — Shortcut Method  
To manually call a number with pause(s) without storing it in your  
Contacts list:  
1. In Standby mode, press and hold  
until a plus sign (+) appears in  
the display.  
1. In Standby mode, enter the number you wish to call.  
2. Press Options. The following pause options appear in the  
Note: When you press  
, your phone  
display:  
automatically replaces this + with 011, the  
three-digit exit code for the United States.  
2-Sec Pause — A 2-second pause after which dialing resumes.  
Wait — A hard pause (waits for input from you).  
2. Enter the country code for the country that you are calling,  
3. Select the desired pause to enter it into the number  
or press and hold  
in the display.  
until a second plus sign (+) appears  
sequence.  
4. Press  
to call the number.  
Tip: Press Save to store pauses along with the number if you plan to call the  
number frequently.  
Call Functions  
18  
     
Speed Dialing  
Voice Dialing  
Speed Dialing lets you place a call to any Contact stored in your  
Contacts list by dialing the Contact’s Location number.  
Your SCH-r330’s voice recognition let’s you speak phone  
numbers and Contact names in a natural manner to call them.  
1-Touch Dialing (1 – 9)  
Note: End Calls Before relaunching the VoiceSignal voice recognition  
software — When you use voice recognition to make a call, you must  
end that call before you can use other Voice Commands. See “Voice  
In Standby mode, press and hold the number key (1 – 9)  
corresponding to the desired Contact’s speed dial number.  
Example: To speed dial the Contact assigned speed dial 5, press and hold  
.
Voice Dialing Tips  
Wait for the beep before speaking.  
2-Touch Dialing (10 – 99)  
Speak clearly at a normal volume, as if you were talking to someone  
on the phone.  
1. In Standby mode, enter the first digit of the desired  
Contact’s speed dial number.  
Dialing a Contact Name  
2. Press and hold the number key representing the second  
1. In Standby mode, press and hold  
until “Say a  
digit.  
command” appears in the display and plays through the  
earpiece.  
Example: To speed dial the Contact assigned speed dial 35, press  
press and hold  
then  
.
2. Say “Call” followed by the Contact’s first and last names.  
Voice Dial repeats the name and dials the number.  
3-Touch Dialing (100 – 999)  
Note: If Voice Dial is unsure which name you said, it displays a choice list of  
up to three names and prompts you with “Did you say?” followed by the  
first name on the list. Say “Yes” to confirm the name, “No” to hear the  
next name, or use the keypad to select the correct name from the list.  
1. In Standby mode, enter the first two digits of the desired  
Contact’s speed dial number.  
2. Press and hold the number key representing the third digit.  
Example: To speed dial the Contacts entry assigned to speed dial 235, press  
, press  
, then press and hold  
.
19  
 
3. If the recognized name has multiple numbers stored for it,  
Voice Dial displays the possible choices and prompts you  
with “Which number?” Say “Home”, “Work”, or “Mobile”,  
and Voice Dial dials the specified number.  
Answering a Call  
When you receive a call, the phone rings and displays one of the  
following:  
If the caller can be identified, the caller’s number (or name if it’s in your  
Contacts) appears in the display.  
4. Press  
to exit VoiceSignal without dialing.  
Dialing a Number  
If the caller cannot be identified, Call from unavailable #  
,
Call from  
restricted #, or no number appears in the display.  
1. In Standby mode, press and hold  
until “Say a  
command” appears in the display and plays through the  
earpiece.  
Tip: When you assign pictures to Contacts entries, the entry’s assigned  
picture appears in the display when you receive a call from that entry.  
2. Say “Call” followed by the telephone number of the person  
you want to call. Voice Dial repeats the number and dials it.  
The phone continues to notify you of the call until one of the  
following events occurs:  
Example: Say “7 8 1 5 5 5 7 2 0 0."  
You answer the call.  
The calling party ends the call.  
The call is sent to voicemail.  
Note: If Voice Dial is unsure of the number, it displays a choice list of up to  
three numbers and prompts you with “Did you say?” followed by the  
first number on the list. Say “Yes” to confirm the number, “No” to hear  
the next number, or use the keypad to select the correct number from  
the list.  
Call Answer  
You can set your phone to answer calls only when you press  
or when you press any key except  
,
, or  
3. Press  
to exit VoiceSignal without dialing.  
more information, refer to “Call Answer” on page 71.)  
Call Notification Features  
Your phone notifies you of a call in a variety of ways.  
Call Functions  
20  
       
Eight ring volume settings: Silence All  
Medium Medium/High, or High  
Different ring types or melodies to distinguish callers.  
,
Vibrate  
,
Low  
,
Low/Medium  
,
1. Press  
second call.  
2. Ask the caller to remain on the line, then press  
place the second call on hold and return to the first call.  
3. Press to alternate between calls.  
to place the first call on hold and answer the  
,
.
to  
Name display with caller ID. (If the caller’s name is programmed into  
your Contacts list).  
Silence an Incoming Ring  
Note: Information about the last 90 each of incoming, missed, and outgoing  
calls are automatically stored to a call log.  
To temporarily silence the incoming call ringer:  
While your phone is ringing, press the Volume key  
), on the left side of the phone, up or down.  
Set Call Ringer Volume  
(
1. In Standby mode, press the Volume key on the left side of  
the phone up or down to set the call ringer volume as  
desired.  
Ignore an Incoming Call  
Ignored calls are immediately forwarded to Voicemail.  
To ignore an incoming call:  
2. Once you’re satisfied with the setting, press  
. The  
phone returns to Standby mode.  
While your phone is ringing, press Ignore. The incoming  
call is forwarded to Voicemail.  
Note: The Vibrate icon (  
) appears in the display when the call ringer is  
set to Vibrate. The Vibrate/Ring icon (  
) appears in the display  
In-Use Menu  
when you press Vibrate on.  
You can access a number of menus and features even while in a  
call.  
Call Waiting  
If you’re on a call, your phone beeps when you receive a second  
call. Call Waiting lets you answer the second call and alternate  
between both calls.  
While in a call, you can:  
Press Mute  
/
Unmute to disable /enable your phone’s microphone.  
Press Options. The following options pop-up in the display:  
Messages — Display the Messages menu.  
Note: Contact your Wireless Carrier for availability.  
Contacts — Display the Contacts menu.  
21  
       
Recent Calls — View your recent calls log.  
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and  
Send DTMF — Send your phone number as DTMF tones to the other  
person on the call.  
missed), briefly press  
while in Standby mode. The All Calls screen,  
listing up to 270 of your most recent calls, appears in the display.  
Voice Privacy — When set to Enhanced, the phone sounds an  
audible beep when you loose privacy (encryption) on a CDMA  
connection. [This option requires that this option is set to Enhanced  
Outgoing / Incoming / Missed Calls  
.
1. From the Calls menu, select Outgoing Calls / Incoming  
Calls / Missed Calls. A list of your outgoing, incoming, or  
missed calls appears in the display.  
Location Turn your GPS location on or set GPS location for  
emergency calls only.  
2. Highlight a call. You have the following options:  
To send a message to the caller, press Msgs. The Send Message  
menu appears in the display. (For more information, refer to  
Speaker On Off — Enables / disables Speakerphone mode during  
/
With the above menu displayed, do one of the following:  
To view information about the call, press OPEN  
(
).  
Select a menu or feature to access the sub-menu or activate the  
selected feature.  
To access further options, press Options. The following options  
appear in the display:  
Press Cancel to exit the menu.  
Save — Save the number to your Contacts.  
Calls Logs  
Details — Contacts calls only — Lets you view the Contacts entry for  
the originator or recipient of this call.  
Your phone has Call Logs that retain information about Outgoing,  
Incoming, and Missed Calls for future reference, to return calls,  
and to add new Contacts. You can also view times for your last  
call and the total of all calls.  
Erase — Erase the selected call from your Outgoing calls list.  
Lock Unlock — Blocks/permits erasure of the selected call from your  
/
Outgoing, Incoming, or Missed call list.  
To access the Calls Logs, in Standby mode, press Menu,  
Erase all — Erase all unlocked calls from your Outgoing call list.  
then select Calls.  
Call Functions  
22  
               
View Timer  
Call Timer screen appears in the display listing the  
Erase Logs  
number and types of calls and their total durations. (See “Call Timer”  
on page 23 for more information.)  
You can erase Outgoing, Incoming, Missed, or All Calls.  
Erase All Calls  
3. Select an option to perform its function.  
1. From the Calls menu, select All Calls. The All Calls list  
appears in the display with the first call in the list  
highlighted.  
Data Calls  
Your phone retains information about the last 10 data calls and  
stores them in the Data call log. You can review the Data call log  
for the time and date of the call, as well as other information.  
2. Press Options, then select Erase all. “Erase all entries?”  
prompts you to confirm erasure of all Calls log entries.  
1. From the Calls menu, select Data Call. A list of your Data  
3. To Erase all calls, press Yes. To keep the calls, press No.  
calls appears in the display.  
Call Timer  
2. Highlight a data call. You have the following options:  
Call Timer shows you the duration of your last call, total calls,  
and calls made during the life of your phone. Call timer is not for  
billing purposes.  
To view further information about the call, press OPEN  
(
).  
To access further options, press Options. The following options  
appear in the display:  
1. From the Calls menu, select Call Timer.  
• Erase — Erase the selected call from your Data call log.  
• Lock Unlock — Blocks / permits erasure of this Call entry.  
2. To reset a timer, highlight it and press Reset.  
/
• Erase All — Erase all calls from your Data call log.  
To reset all of the timers except Lifetime Calls, press  
Reset All.  
• Data Counter — Shows the amount of data Transmitted and  
Received during this call, the Total amount of data exchanged since  
the counters were last reset, and the total amount of data  
exchanged since the phone was activated.  
Note: LifeTime call timers can never be reset.  
3. Press  
to exit the Call Timer screen.  
3. Select an option to perform its function.  
23  
           
Data Counter  
3. Press Options, then highlight Save and select Create New  
(to add the number as a Contacts entry) or Update  
Existing (to find a Contact with which to associate the new  
number).  
Use Data Counter to view the amount of data sent or received (or  
a total of both) by the data services on your phone. The Data  
Counter can help you monitor data usage, especially if your  
service agreement has usage limits.  
4. Follow the prompts to store the selected number to your  
Contacts list.  
1. From the Calls menu, select Data Counter.  
2. To reset a timer other than Lifetime Data Counter, highlight  
it and press Reset.  
3. To reset all timers except Lifetime Data Counter, press  
Reset All.  
Note: The Lifetime Data Counter can never be reset.  
4. Press  
to exit the Data Counter screen.  
Store Numbers from Call Logs  
You can store numbers from your Outgoing, Incoming, Missed,  
and All calls logs to your Contacts list.  
Tip: In Standby mode, briefly press  
to display the Recent Calls list. You  
can then select any call in the list to save to Contacts.  
1. From the Calls menu, select Outgoing Calls / Incoming  
Calls / Missed Calls / All Calls  
.
2. Select the number you wish to store in Contacts.  
Call Functions  
24  
       
Section 6: Understanding Your Contacts  
This section details how you can manage your daily contacts by  
storing their names and numbers in your Contacts list.  
Adding a New Contacts Entry  
You can use either of three methods to add an entirely new entry  
to Contacts.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
Dial Method  
1. In Standby mode, enter the number you wish to add to  
your Contacts.  
Contacts  
2. Press Save.  
Up to 500 entries can be stored in Contacts. Each entry can have  
up to five associated phone numbers and one e-mail address.  
Each phone number can be up to 32 digits in length, including 2-  
more information), and associated names can be up to 32  
characters in length. You can assign the Speed Dial numbers of  
your choice for each entry. You can also mark your Contacts list  
as Restricted to prevent unauthorized viewing. (See “Restriction”  
on page 74 for more information).  
The following options appear in the display:  
Create New — Lets you create a new Contacts entry.  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
3. Select Create New. The Create New screen appears in the  
display showing the following icons:  
Mobile  
Pager  
Home  
Fax  
Work  
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch  
Dialing allow you to call numbers stored in Contacts faster.  
4. Select the number type that matches your new entry.  
Open Contacts  
5. Use the keypad to enter a name to associate with the  
1. In Standby mode, press Menu, then select Contacts. The  
Contacts entry.  
following options appear in the display:  
25  
                   
6. Press  
to save the new entry.  
Saving a Number After a Call  
Add to an Existing Entry  
Once you finish a call, you can store the caller’s number to your  
Contacts list.  
1. From the Save screen, select Update Existing. The  
Update Existing screen appears in the display showing  
your Contacts list with the Go To field and the first  
Contacts entry highlighted.  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
2. Find and select the Contacts entry to which you want to  
1. Press  
to end your call. The call time, length of call,  
phone number, and name of the party (if available) appear  
in the display.  
The following number type options appear in the display:  
2. Press Save. The Save screen appears in the display  
showing the following options:  
Mobile  
Pager  
Home  
Fax  
Work  
Create New — Lets you create a new Contacts entry.  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
3. Select the desired option, then follow the instructions in  
the preceding sub-sections depending on whether the  
number is a new entry or you are adding it to an existing  
entry.  
Note: Number types that are already assigned a number show the number  
instead of the number type label.  
3. Select the desired unassigned number type. The Contacts  
entry information appears in the display with the new  
number posted in the appropriate number type field.  
Menu Method  
1. From the Contacts menu, select Add New Contact.  
The Add New Entry screen appears in the display with the  
Name field highlighted.  
4. Press  
to save your changes to the existing entry.  
Understanding Your Contacts  
26  
         
2. Enter the name of the new entry using either keypad. (See  
Calls Log Method  
1. Display the desired Calls log. (For more information, refer  
3. Highlight one of the following fields:  
2. Highlight the Call whose number you want to add to your  
Mobile  
Home  
Work  
Pager  
Email  
Group  
Ringtone  
Fax  
Contacts.  
3. Press Options, and select Save  
.
4. Repeat Steps 2 through 6 of “Dial Method” on page 25.  
Finding a Contacts Entry  
Menu Method  
4. Enter a phone number or e-mail address in the highlighted  
field.  
5. Repeat steps 3 and 4 as needed.  
6. Press  
to save the new entry.  
1. From the Contacts menu, select Find. The Contacts Find  
screen appears in the display.  
Adding a Picture ID  
To add a picture or image to a Contact that will identify that  
Contact as originator of a new call, do the following:  
Tip: You can also access the Contacts Find screen directly from Standby  
mode, by pressing Contacts  
.
1. In the Add New Entry or Edit Entry screen, highlight the No  
2. Enter the first few letters of the name you want. A list of  
Picture field at the top of the screen.  
Contacts with matching names appears in the display.  
2. Press Set. The My Images list appears in the display. (For  
3. Highlight the desired Contact.  
4. To dial the Contact:  
Press  
To dial another of the Contact’s numbers, press View, highlight the  
desired number, and press  
5. To edit the Contact information, press EDIT  
to dial the Contact’s default number.  
3. Select the desired picture or image. You are returned to the  
Add New Entry or Edit Entry screen with the selected  
picture or image at the top of the screen.  
.
(
).  
27  
   
Voice Method  
To say the name again, press Repeat  
.
To exit VoiceSignal without dialing, press  
.
Use the Voice SVC Lookup command to view contact information  
for any named contact stored in your Contacts list by saying the  
name.  
5. The contact information for the name you selected appears  
in the display.  
To dial the number associated with the name, press  
.
Note: The Lookup command shows the requested contact information in the  
display but does not dial any phone numbers for the contact.  
To erase this entry from your Contacts list, press Erase.  
To add or change information for this entry, press EDIT  
(
).  
1. In Standby mode, press and hold  
to launch Voice  
For more options, press Options and the following options pop-up  
in the display:  
SVC.  
Say a Command” appears in the display and is  
pronounced through the speaker.  
Send Txt Msg  
Send Pic Msg  
2. Say “Lookup”.  
Call  
Voice SVC prompts you to “Say the name.”  
Send Name Card Via Bluetooth  
3. Speak clearly and say the full name of the person you want  
Quick Search Method  
to call, exactly as it is entered in your Contacts list.  
1. In Standby mode, and with Quick Search phone setting set  
to On, press the numeric keys that correspond to the first  
few letters of a Contact’s name.  
If VoiceSignal recognizes the name you said, the Contact  
information for that name appears in the display.  
If VoiceSignal does not recognize the name you said, a choice list of  
up to three names appears in the display, and VoiceSignal prompts  
you with “Did you say?” followed by the first name on the list.  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
information.)  
Understanding Your Contacts  
28  
 
For example, to search for “Sally” you would enter  
3. When the desired entry is listed in the display, highlight the  
entry.  
To dial the default number associated with the name, press  
.
S
A
L
Tip: You can select another number assigned to the name by using the Left/  
Right navigation keys.  
2. Press the Navigation key Up. The Contacts Find screen  
appears in the display with the first matching Contact  
name in a list and highlighted.  
To add or change information for this entry, press Edit  
To show information about the entry., press VIEW  
For more options, press Options  
.
(
)
.
3. Highlight the desired Contact and press  
to call them.  
Editing a Contacts Entry  
Shortcut Key Method  
Editing Contacts Name and Numbers  
If you’ve stored a name entry in Contacts, Find allows you to find  
1. Find the Contacts entry you wish to change. See “Finding a  
it quickly.  
1. In Standby mode, press Contacts  
.
2. Highlight the entry and press EDIT ( ). The Edit Contact  
The Find screen appears in the display with the Go To field  
and the first Contacts entry highlighted.  
screen appears in the display.  
3. Highlight the particular information you want to add or  
Tip: You can also access the Find screen from the Contacts menu by  
change.  
selecting Find.  
4. When you’re finished changing the contents of a field,  
2. Enter a name as entered in Contacts. For example, if you  
press  
. Your changes are saved and a confirmation  
saved the name as “Amy Smith”, begin the search by  
message appears in the display.  
pressing  
or (for “A”).  
As you enter letters, the names of the closest matches  
appear in the display.  
29  
       
Add Pauses to Contacts Numbers  
2. If you stored the number using Wait(s), recall the number  
from Contacts and wait for the appropriate prompt from  
the dialed number.  
Calls to automated systems such as banking services often  
require a password or account number. Instead of manually  
entering these numbers, you can store them in a Contacts entry  
with the phone number and with special characters called  
pauses, up to a maximum of 32 digits.  
3. Press  
to dial the number.  
Edit an Existing E-mail Address  
1. From the Edit Contact screen, highlight the Email field.  
1. From the Edit Contact screen, select and edit the desired  
more information.)  
(See “Editing a Contacts Entry” for more information.)  
2. Use either keypad to edit the e-mail address. (See  
“Entering Text” on page 15 for more information.)  
2. Press Options. The following pause options appear in the  
3. Press SAVE  
(
) to save your changes.  
display:  
Assigning a Picture to a Contacts Entry  
Wait — A hard pause (waits for input from you).  
When you assign a picture to a Contacts entry, the picture you  
assign appears in the display when you receive a call from that  
Contact.  
Note: You can enter multiple Waits to extend the length of a pause. For  
example, two consecutive Waits cause a total pause time of four  
seconds. Keep in mind that pauses count as digits towards the 32-digit  
maximum.  
1. From the Edit Contact screen, highlight the Picture ID  
field (at the top of the Edit Contact screen), then press  
Set.  
2-Sec Pause — A 2-second pause after which dialing resumes.  
3. Select the desired pause to add it to the number sequence.  
A photo gallery screen appears in the display, showing a  
4. When you’re finished entering information, press  
to  
store the number to Contacts.  
Pause Dial from Contacts  
2. Select the picture that you wish to assign to the Contacts  
1. If you stored the number using 2-second pause(s), simply  
entry.  
recall the number from Contacts.  
Understanding Your Contacts  
30  
       
If there is no usable picture in the photo gallery screen:  
3. Select the ringtone or sound that you wish to assign to the  
Contacts entry. The Contacts entry screen appears in the  
display with the name of the selected file in the Ringtone  
field.  
Press Camera. The camera viewfinder screen appears in the  
display.  
Press TAKE  
display.  
(
). The picture you have taken appears in the  
4. Press SAVE  
selected Contacts entry.  
Speed Dial  
(
) to save the ringer assignment to the  
Press OK  
(
).  
The Contacts entry screen appears in the display with a  
thumbnail view of the selected picture in the Picture ID  
field.  
A Contacts entry’s Speed Dial number corresponds to the number  
keys you press to speed dial one of that entry’s numbers. For  
example:  
3. Press SAVE  
(
) to save your Picture ID assignment.  
Assigning a Ringtone to a Contacts Entry  
To speed dial the Contacts entry assigned to Location 5, press and hold  
, (1-touch dialing).  
When you assign a ringtone to a Contacts entry, the phone plays  
the ringtone that you assign when you receive a call from that  
Contact instead of the Voice Calls ringtone.  
To speed dial the Contacts entry assigned to Location 35, press  
then press and hold  
To speed dial the Contacts entry assigned to Location 235, press  
press , then press and hold , (3-touch dialing).  
, (2-touch dialing).  
,
1. From the Edit Contact screen, highlight the Ringtone  
field, then press Set. The Contact Tone menu showing the  
following options appears in the display:  
You can assign one or more Speed Dial numbers to a Contacts  
entry during new entry creation or by editing an existing entry.  
My Ringtones  
My Sounds  
2. Select the desired option. The My Ringtones file list or the  
My Sounds file list appears in the display.  
31  
   
Assignment During Entry Creation  
7. Press  
to save your changes.  
Changing a Speed Dial Location  
1. Find the Contacts entry you want to edit. See “Finding a  
To assign a Speed Call number to a new Contacts entry number,  
do the following:  
1. Follow either of the New Contacts entry procedures (see  
a name for the entry.  
2. Highlight the desired entry, then press Edit.  
3. Highlight the number field marked by the Speed Dial icon  
2. After entering the Contacts entry name, do not press  
.
(
).  
Instead, highlight the number field to be assigned a Speed  
Dial number.  
4. Press Options, then select Remove speed dial. “Remove  
speed dial?” prompts you to confirm your desire to  
remove the entry.  
3. Press Options, then select Set Speed Dial. The Speed Dial  
screen appears in the display.  
5. Press Yes to remove the Speed Dial assignment. “Speed  
Dial Removed” pops up in the display, and you are  
returned to the Edit Contact screen.  
4. Highlight an Unassigned Speed Dial number or enter an  
Unassigned Speed Dial number in the Go To field using  
either keypad.  
6. Do steps 2 through 7 of the “Assignment During Entry  
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are  
already assigned to Voicemail (001) and to emergency use (911).  
Contacts Groups  
Contact Groups let you easily send messages to multiple,  
selected Contacts. You can also use Groups to find Contact  
entries and to add/remove Contacts names in a Group or to  
create or rename a Group.  
5. Press SET ( ). You are prompted to confirm your Speed  
Dial number assignment.  
6. Press Yes to save your Speed Dial assignment and return  
to the Add New Entry screen.  
Press No to discard the assignment and return to the  
Speed Dial screen.  
Understanding Your Contacts  
32  
     
Using Group Add Option  
Add Contacts Entry to a Group  
Using Add New/Edit Contact Option  
The Add option lets you add one or more existing Contacts to a  
Group.  
To add a Contact to a Group using either the Add New Contact  
option or the Edit Contact option, do the following:  
1. From the Contacts menu, select Group.  
The Group List screen appears in the display showing  
Groups similar to the following:  
1. Create a Contacts entry (see “Adding a New Contacts  
Entry” on page 25 for more information) that you want to  
add to a Group.  
No Group  
Business  
Colleague  
Family  
Friends  
– Or –  
Find a Contacts entry (see “Finding a Contacts Entry” on  
page 27 for more information) that you want to add to a  
Group.  
2. Highlight a Group, then press Options. The following  
options pop-up in the display:  
Send Message  
Rename  
Erase  
2. Highlight the Group field, then press Set.  
The Select Group screen appears in the display showing  
Groups similar to the following:  
Add  
No Group  
Business  
Colleague  
Family  
Friends  
3. Select Add. The Add Contacts screen appears in the  
display showing a list of Contacts entries.  
3. Select the Group to which you want to assign the selected  
4. Do one of the following:  
Contact.  
Highlight a Contacts entry you want to add to the group, then press  
MARK ). A check mark appears in the entry’s check box.  
(
You are returned to the Add New Entry/Edit Contact  
screen and the selected Group name populates the Group  
field.  
Repeat as needed to check all the desired Contacts.  
Press Options, then select Mark All  
.
4. Press  
to save your changes.  
33  
Add a New Group  
Note: To unmark a marked Contact, highlight the Contact and press MARK  
) to clear the check mark.  
(
The New option lets you add Groups.  
1. From the Contacts menu, select Group. The Group List  
5. When you have marked the Contacts you want to add to  
the group, press Done. “Contact added to group”  
appears in the display, followed by the selected Group list  
including the added Contacts.  
screen appears in the display.  
2. Press New. The New Group screen appears in the display.  
3. Enter a new group name using either keypad. (See  
“Entering Text” on page 15 for more information.)  
Rename a Group  
4. Press SAVE ( ). Group Saved” appears in the display  
followed by the Group List screen showing your new  
Group.  
The Rename option lets you change the name any of the Groups,  
except No Group.  
1. From the Contacts menu, select Group. The Group List  
Erase a Group  
screen appears in the display.  
The Erase option lets you delete a Group, thus freeing you to  
reassign the Contacts formerly in the Group.  
2. Highlight a Group name (other than No Group) that you  
wish to change, then press Options.  
1. From the Contacts menu, select Group. The Group List  
3. Select Rename.  
screen appears in the display.  
The Rename Group screen appears in the display.  
2. Highlight the Group you wish to delete, then press  
4. Enter changes to the group name using either keypad.  
Options, and select Erase.  
You are prompted to confirm the Group erasure.  
5. When you have completed your changes to the Group  
3. Press Yes to confirm erasure of the highlighted Group.  
name, press SAVE ( ).  
Press No to retain the Group.  
Group Renamed” appears in the display followed by the  
Group List screen showing your renamed Group.  
Note: When you delete a Group, the assigned Contacts entries return to No  
Group  
.
Understanding Your Contacts  
34  
Deleting a Contacts Entry  
1. Find the Contacts entry you want to delete. (See “Finding a  
2. Highlight the desired entry, then press Options and select  
Erase. The phone prompts you to confirm the erasure.  
3. Press Yes to confirm erasure of the selected Contact. Press  
No to retain the Contact.  
Memory Info  
The Memory Info menu option lets you view the amount of  
memory you have used to store Contacts entries, as well as the  
memory remaining to store more Contacts entries.  
From the Contacts menu, select Memory Info.  
The Memory Info Contacts screen appears in the display  
showing the amount of memory Used and remaining (Free)  
for Contacts entries.  
35  
       
Section 7: Messages  
This section explains how to use your phone to exchange Text  
and Picture messages with compatible phones and devices.  
2. Enter the phone number or e-mail address of the recipient.  
Press Add to address your message to Contacts Groups, or  
Recent Calls  
3. Press . The Text: appears in the display.  
4. Enter your message text.  
,
.
Note: Available memory is shared between all messages. You can store up to  
100 messages. However, the exact number is dependent upon  
message length.  
5. If needed, set message delivery options by pressing  
Accessing the Messages Menu  
In Standby mode, press Msgs.  
– or –  
6. Once you’re finished entering your message, press SEND  
Press Menu, then select Messages.  
The Messages menu appears in the display.  
(
).  
Send Picture Messages in Camera Mode  
Picture messages can be sent to recipients with compatible  
phones or devices. You can even accompany a Picture message  
with a voice memo or other sound file.  
Create and Send Text Messages  
Text messages can be up to 160 characters in length.  
1. From the Messages menu, select Send Message Text  
Message. The Create Txt Msg screen appears in the  
display showing the To: list.  
1. In Standby mode, launch the Camera and take a picture.  
Tip: To launch the Create Txt Msg screen using a voice command — In  
Standby mode, press and hold  
until the phone prompts, “Say a  
2. Press Send  
(
) to save the picture and begin the delivery  
command.” Say “Send Text” into the microphone. You are then prompted  
to say a Contact name or a number for the first recipient of the  
message.  
process. The Create Pic Msg screen then appears in the  
display with the Send To: list highlighted.  
Messages  
36  
                 
Audio files list — Select from the list of previously recorded voice  
memos and preloaded audio files on your phone.  
3. Enter the phone number or e-mail address of the recipient  
of the Picture message, then press OK  
(
). The Subject:  
Select an option to insert a sound into your message.  
Press to exit the pop-up menu without inserting a sound.  
8. To complete the message text and set message delivery  
field appears in the display.  
Tip: Press Add to display a pop-up menu containing: Contacts Groups,  
,
Recent Calls, and OnlineAlbum. These options allow you to find and add  
recipients to the Send To: list.  
9. Press SEND  
(
) to send the message. “Pic Msg  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send to field of the  
Picture message composer.  
Sending” appears in the display and a progress bar  
indicates the send status.  
Send Picture Messages in Standby Mode  
4. Enter a subject for the Picture message.  
Send Picture messages to recipients with a compatible phone or  
other device, and accompany a Picture message with a voice  
memo, ringtone, or downloaded melody.  
5. Highlight the Text: field, then enter the message text.  
6. Your new picture is already in the Picture: field.  
7. If you wish to add a sound to your Picture message,  
highlight the Sound: field and do the following; otherwise,  
proceed to step 8.  
1. From the Messages menu, select Send Message ➔  
Picture Message. The Create Pic Msg screen appears in  
the display with the Send To tab highlighted and showing  
the To: list.  
Press Sounds. The My Sounds screen appears in the display  
showing the following options:  
Record New — Record a new memo to insert into the message.  
Tip: To launch the Create Pic Msg screen using a voice command — In  
Standby mode, press and hold  
until the phone prompts, “Say a  
command.” Say “Send Picture” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
Note: If you record first before attaching a picture, you can record and insert  
a voice memo of up to 60 seconds in length. If you attach a picture  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
2. Enter the phone number or e-mail address of the recipient.  
37  
   
Press Add to address your message to Contacts  
,
Groups  
,
You are returned to the Create Pic Msg screen with the  
Recent Calls, and OnlineAlbum  
.
selected picture in the Picture: field.  
8. For a Picture Message, to add a sound file to your  
Tip: You can send a Picture message to up to ten recipients. Enter each  
message, highlight the Sound: field, then press Sounds  
The My Sounds screen appears in the display.  
.
recipient’s address or phone number in a separate Send To field of the  
Picture message composer.  
9. Do one of the following:  
3. Press  
. The Subject: field appears in the display.  
Select a file from the list of previously recorded voice memos and  
other audio files on your phone.  
4. Enter a subject for the Picture message.  
5. Highlight the Text: field, then enter the message text.  
Select Record New and record a new voice memo, then select the  
new recorded sound file to add it to the message.  
6. For a Picture Message, highlight the Picture: field, then  
press Picture. A photo gallery of thumbnail images  
appears in the display.  
Note: If you record first before attaching a picture, you can record and insert  
a voice memo of up to 60 seconds in length. If you attach a picture  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
7. Do one of the following:  
Select a picture to add it to your message.  
To expand the highlighted picture for easier viewing, press View  
Include a new picture by doing the following:  
.
Press  
sound.  
to exit the My Sounds screen without selecting a  
Press Camera. The Camera viewfinder screen appears.  
10. To complete the message text and set message delivery  
Press TAKE  
(
(
) or  
).  
to take the picture.  
Press Send  
11. Press SEND  
(
) to send the message. “Pic Msg  
Note: For more information about using the Camera-Camcorder feature in  
Sending” appears in the display and a progress bar  
indicates the send status.  
Press  
picture.  
to exit the photo gallery screen without selecting a  
Messages  
38  
In Standby mode — The ringer sounds (unless turned off) and New  
Message appears in the display along with the closed envelope icon  
Message Content and Delivery Options  
Edit Send To — Text message only — Edit the recipient’s number or  
email address.  
(
).  
While in a call  
the closed envelope icon ( ).  
New Message appears in the display along with  
Preview — Picture message only — View the picture as the recipient  
will see it.  
Add Quick Text — Insert pre-composed text in your message.  
Save As Draft — Save the message to your Draft folder.  
The date and time of the message also appear in the display  
along with the following options:  
View Now — Downloads (picture messages) and opens the message.  
Priority Level — Choose Urgent  
only).  
Validity Period — Enter the Date when this message will cease to be  
valid, then press the Navigation key Left or Right to choose the Time  
,
Normal, or Low (Picture message  
You have the following options:  
Text Message — Forward, Reply With Copy, Save Quick Text, Lock,  
Add To Contacts, Message Info, or Extract.  
.
Picture Message — Reply, Forward, Delete, Save Text, Save Pic, or  
Save Msg.  
Deferred Delivery — Directs that this message not be delivered until  
a selected date and time.  
View Later — Saves the message to your Inbox, where you can view  
it later, then returns your phone to its previous mode. (For more  
(Enh.) Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
Remove Pic — Picture message only — Remove the picture from your  
message.  
Messages and Lock Mode  
Remove Sound — Picture message only — Remove the sound file  
from your message.  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message appear in the display, but you  
cannot access the message until you enter the lock code.  
Add To Contacts — Save the recipient’s number or e-mail address as a  
Contacts list entry.  
Receiving Messages  
When you receive a message, your phone notifies you in one of  
the following ways:  
39  
       
Voicemail  
3. Follow the voice prompts to access your voicemail  
messages.  
Messages in your voice mailbox are logged in the Voicemail box  
of the Messages menu. Open the Voicemail box to view the  
details of the Voicemail message.  
Message Boxes  
Inbox  
When you’re notified of a new voicemail message by an alert  
tone and the new message icon, the following options pop:  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Listen Now — Calls your voice mailbox and lets you listen to your  
messages.  
Review Messages in the Inbox  
1. From the Messages menu, select Inbox. The Inbox  
appears in the display showing a list of received  
messages.  
Listen Later — Returns you to Standby mode where you can choose  
to call your mailbox and review your messages at a later time.  
Listen to Voicemail Now  
Tip: While in a call, press Options, then select Messages  
.
1. In Standby mode, select Listen Now in the New Voicemail  
pop-up. Your phone automatically calls your voice mailbox.  
2. Highlight the message you wish to view, then press OPEN  
) to view contents of the highlighted message.  
2. Follow the voice prompts to access your voicemail  
(
messages.  
3. While viewing your message, you can access additional  
options by pressing Options. (For more information, refer  
Listen to Voicemail Later  
1. From the Messages menu, select Voicemail. The Voicemail  
screen appears in the display.  
Managing Inbox Messages  
2. Press OPEN. Your phone dials your voicemail account.  
1. From the Messages menu, select Inbox. The Inbox  
appears in the display showing a list of received  
messages.  
Tip: You can also access your voicemail from Standby mode, by pressing and  
holding  
to speed call your voice mailbox.  
2. Highlight a message in the list, you have the following  
options:  
Messages  
40  
                 
To remove the highlighted message from the Inbox, press Erase  
.
To remove the highlighted message from the Inbox, press Erase  
.
To review the highlighted message, press OPEN ).  
(
To review the highlighted message, press OPEN ).  
(
For more options, press Options. (For more information, refer to  
For more options, press Options. (For more information, refer to  
Outbox  
Draft Box  
Your phone stores messages in the Outbox, regardless of  
Messages in the Draft Box are those that have been composed  
and saved to the Draft Box. You can return to the Draft Box at any  
time to view, edit, or send a draft message.  
whether the message was successfully transmitted. Verify if and  
when a message or e-mail was successfully received by enabling  
the Enh. Delivery Ack/Delivery Ack feature.  
Create a Draft Message  
Review Messages in the Outbox  
1. From the Messages menu, select Send Message  
Message Picture Message  
The Create Txt Msg Create Pic Msg screen appears in the  
Text  
1. From the Messages menu, select Outbox. Your list of sent  
/
.
messages appear in the display.  
/
2. Highlight the message you wish to view, then press OPEN  
display showing the To: list.  
(
) to view contents of the highlighted message.  
2. Enter the phone Number or Email address of a recipient,  
3. While viewing your message, you can access additional  
options by pressing Options. (For more information, refer  
then press  
.
Tip: Press Add to display a pop-up menu containing: Contacts Groups,  
,
Recent Calls, and OnlineAlbum. These options allow you to find and add  
recipients to the Send To: list.  
4. Select an option to perform its function.  
Managing Outbox Messages  
3. Compose your message using either keypad, press  
Options, then select Save As Draft. “Message saved in  
drafts” appears in the display and your message is saved  
to the Drafts box.  
1. From the Messages menu, select Outbox. Your list of sent  
messages appear in the display.  
2. Highlight a message in the list, you have the following  
options:  
41  
                   
View and Edit Draft Text Messages  
4. When you have completed composing your message,  
press SEND ) to send it.  
(
1. From the Messages menu, select Drafts. A list of any draft  
Managing Draft Messages  
messages that you’ve saved appears in the display.  
2. Highlight a text message that you wish to view or edit, then  
1. From the Messages menu, select Drafts. A list of any draft  
press EDIT  
(
). The Create Txt Msg screen appears in the  
messages that you’ve saved appears in the display.  
display.  
2. Highlight a message, then do one of the following:  
3. Enter or change the recipient’s number and/or e-mail  
To remove the highlighted message from the Drafts box, press  
Erase  
.
address and the message text.  
To access other options, press Options. (For more information,  
4. Make any needed changes, then set message send  
options by pressing Options. (For more information, refer to  
Message View Options  
5. When you have completed composing your message,  
INBOX  
press SEND  
(
) to send it.  
Forward — Send a copy of this message to another recipient.  
View and Edit Draft Pic. Messages  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
1. From the Messages menu, select Drafts. A list of any draft  
messages that you’ve saved appears in the display.  
Save Sound — Picture Messages Only — Save the audio file  
(sound) included in this message to the My Sounds folder.  
2. Highlight the picture message that you wish to view, then  
press EDIT key ( ). The Create Pic Msg screen appears  
in the display.  
Save Pic — Picture Messages Only — Save the picture included  
in this message to the My Images folder.  
3. Make any needed changes, then set message send  
options by pressing Options. (For more information, refer to  
Save Quick Text — Save the text in this message as a new Quick  
Text.  
Lock  
/
Unlock — Block/permit erasure of the highlighted  
message.  
Messages  
42  
   
Add To Contacts — Save the sender’s number to your Contacts.  
• Save As Draft — Save the message to your Drafts box.  
• Priority Level — Choose Urgent or Normal  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
.
• Validity Period — Enter the Date when this message will cease to  
be valid, then use the Left and Right navigation keys to choose the  
Extract — Calls the sender of the received message.  
Time  
.
OUTBOX  
• Deferred Delivery — Enter the Date and Time when this message  
• Play Again — Replay the sound file in a Picture message.  
Forward — Send the highlighted message to another recipient.  
will be delivered.  
• Enh. Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
• Erase — Picture Messages Only — Delete this message from the  
Outbox, if the message is Unlocked.  
• Add To Contacts — Save the recipient’s number or e-mail address  
to your Contacts.  
Lock Unlock — Block/permit erasure of the highlighted  
/
message.  
DRAFT Pic  
Save Quick Text — Save the message text as Quick Text for  
insertion into other messages.  
• Preview — Shows the message contents.  
• Add Quick Text — Insert pre-composed text into your message  
text.  
Add To Contacts — Save the recipient’s number to your  
Contacts.  
• Save As Draft — Saves the changed message to the Draft Box.  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
Priority Level — Choose Urgent, Normal, or Low.  
• Extract — Call or send a new message to the recipient for this  
message.  
• Validity Period — Enter the Date when this message will cease to  
be valid, then use the Left and Right navigation keys to choose the  
Time  
.
DRAFT Text  
• Deferred Delivery — Enter the Date and Time when this message  
will be delivered.  
• Edit Send To — Change, add, or remove recipients from this  
message.  
• Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
• Add Quick Text — Insert pre-composed text into your message  
text.  
43  
Erase Multiple — Erase one or more selected Unlocked messages  
from the Outbox.  
• Remove Pic — Remove image included in draft message.  
• Remove Sound — Remove sound file included in draft message.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
• Add To Contacts — Save the recipient’s number or e-mail address  
to your Contacts.  
DRAFT  
Message List Options  
Send — Send the highlighted message to the number or e-mail  
address currently included with the message.  
INBOX  
Reply — Compose and send a reply message to the originator of the  
received message.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Add To Contacts — Save the recipient’s number and/or e-mail  
address to your Contacts.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the original  
message.  
Save Quick Text — Save the message text as Quick Text for insertion  
into other messages.  
Forward — Send a copy of this message to another recipient.  
Erase Multiple — Delete one or more selected unlocked draft  
messages.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Add To Contacts — Save the sender’s number to your Contacts.  
Erase Messages  
You can erase all of the messages in any or all of message boxes  
using one convenient sub-menu.  
Erase Multiple — Delete one or more selected Unlocked messages  
from the Inbox.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Note: This function erases all messages in the selected message box. To  
delete a single message, go to the respective message box, highlight  
the message, and press Erase. (For more information, refer to  
OUTBOX  
Forward — Send the highlighted message to another recipient.  
Resend — Send another copy of the highlighted message to the  
original recipient  
1. From the Messages menu, select Erase Messages  
Outbox Drafts All Messages  
Inbox  
Lock  
/
Unlock — Block/permit erasure of the highlighted message.  
/
/
/
.
Add To Contacts — Save the recipient’s number to your Contacts.  
Messages  
44  
       
2. Select the message box containing the messages you  
want to delete. You’re prompted to confirm the erasure of  
all messages in the selected box or in all boxes.  
Signature — Choose whether to include a text signature in  
outgoing message text, and enter the text to be included.  
Reminder — Select whether and how often you will hear and/or  
feel a reminder that you have received a message (Once Every 2  
,
3. To delete the messages, press Yes. To cancel deleting the  
Minutes Every 15 Minutes, Off).  
,
messages, press No  
.
2. Select the desired option, then select the desired setting or  
Message Settings  
Use the Msg Settings sub-menus to define settings for general,  
enter the desired value.  
Editing and Entering Quick Text  
text, and picture messages.  
1. From the Messages menu, select Msg Settings  
General  
General Message Settings  
Quick Text. The Quick Text sub-menu appears in the  
1. From the Messages menu, select Msg Settings  
General.  
display.  
The following options appear in the display.  
2. Select a Quick Text you want to change.  
Auto Save — Choose whether your messages are saved  
automatically when you exit them (On Off Prompt).  
Note: You cannot change the pre-defined Quick Text included with your  
,
,
phone.  
Auto Erase Choose to receive (On) or not receive (Off) a  
warning message when you delete a message.  
3. To create a new Quick Text, press New  
.
Quick Text — Edit your pre-composed messages, which can then  
be inserted into new messages.  
Tip: You can also create new Quick Text by viewing/editing an Outbox  
message and using the Save Quick Text option in the Options menu. See  
Voicemail # — Edit or view your Voicemail number.  
Entry Mode — Choose the default method for entering text into  
4. Enter/change the text content of your Quick Text using  
either keypad. (See “Entering Text” on page 15 for more  
information.)  
messages (T9word T9Word, T9WORD, abc, Abc, ABC, 123).  
,
Callback # — Choose whether to include a callback phone  
number with your outgoing messages, and enter the number to be  
included.  
45  
         
5. To save your finished Quick Text, press  
. The Quick Text  
received. With Auto Receive Off, you are prompted to download  
Picture messages.  
menu appears in the display with your new Quick Text  
highlighted.  
Signature — Create a signature, which can be included at the  
bottom of outgoing Picture message text.  
Text Message Settings  
1. From the Messages menu, select Msg Settings  
2. Select the desired option, then select the desired setting or  
Text  
enter the desired value.  
Message. The following options appear in the display.  
Auto View — On/Off — With Auto View On, the full content of a  
text message appears in the display as the messages is received.  
Signature — Create a signature, which can be included at the  
bottom of outgoing message text.  
Auto Scroll — On/Off — With Auto Scroll On, the full content of a  
text message automatically rolls upward on the display, one screen-  
full at a time.  
• Message View — Chat/Normal — With Message View set to  
Chat, multiple text messages exchanged with a single addressee  
appear as a chat session.  
2. Select the desired option, then select the desired setting or  
enter the desired value.  
Picture Message Settings  
1. From the Messages menu, select Msg Settings  
Picture  
Message. The following options appear in the display.  
Auto Receive — On/Off — With Auto Receive On, Picture  
messages automatically download and display as they are  
Messages  
46  
       
Section 8: Camera  
Use your r330 phone to take full color digital pictures, display  
them on your phone’s vivid color display, and instantly share  
them with family and friends. This section explains how you can  
do the following:  
1. In Standby mode, press and hold the  
Camera key (  
of the phone.  
) on the right side  
The camera view finder screen  
appears in the display. (For more  
Take pictures with your phone’s built-in digital camera.  
Send and receive pictures taken with your phone’s camera.  
Set the several options associated with the camera that help you take  
crisp, clear pictures.  
Note: You can also activate the camera by pressing Menu, then selecting  
Multimedia  
Camera.  
Taking Pictures  
Taking pictures with the built-in  
camera is as simple as launching  
it, choosing a subject, pointing  
the lens (located on the front of  
your phone’s flip, near the hinge),  
and pressing a button.  
Camera  
Lens  
2. Using the display as a viewfinder, point the camera at your  
subject.  
3. To take a photo, press the Camera key (  
) or TAKE. The  
photo you’ve taken appears in the display.  
To save the picture to memory, press Save.  
To send the photo as part of a Picture message, press Send. (For  
Taking Snap Shots  
(Single Pictures)  
To take a single picture using the  
current camera settings, do the  
following:  
To erase the photo, press Cancel.  
Tip: You can change a number of the camera’s settings to suit particular  
47  
               
Taking Multi Shot Pictures  
4. Using the display as a viewfinder, point the camera lens at  
your subject.  
When taking pictures of moving subjects or subjects you cannot  
pose, such as children and pets, the camera’s Multi Shot mode  
simplifies the process of taking multiple pictures in quick  
succession.  
5. Press TAKE or the Camera key (  
one picture (Single Shot) or lets you take multiple pictures  
Series Shot or Divided Shot 2x2 3x3).  
6. To save the picture(s) to memory, press Save  
). The camera takes  
(
/
/
Done.  
1. In Standby mode, press and hold the Camera key (  
) on  
the right side of the phone. The camera view finder screen  
To discard the pictures, press Cancel or  
.
Point, Click, and Send Pictures  
Take a picture and send it to anyone with a compatible device in  
a few easy steps.  
Note: You can also activate the camera by pressing Menu, then select  
Multimedia  
Camera.  
1. In Standby mode, press and hold the Camera key (  
) on  
the right side of the phone. The camera view finder screen  
appears in the display.  
2. Press Options, then highlight  
/
/
/
.
The following options appear in the display:  
2. Using the display as a viewfinder, take the desired picture  
• Single Shot Take one photo with each press of the Camera  
button.  
by pressing TAKE or the Camera key (  
).  
• Series Shot — Lets you take a series of 5 photos automatically.  
The photo review screen appears in the display.  
• Divided Shot  
(
2x2 3x3) — Lets you take a mosaic of 1 to 9  
/
3. Press Send  
.
photos.  
4. Enter the recipient’s phone number or e-mail address  
When you select a Series Shot option, a Series Shot  
progress bar (  
display.  
using the keypad.  
) appears in the  
5. Press OK to save the address(es).  
6. Select other message fields as needed. (For more  
3. When you select a Divided Shot option, a Divided Shot  
progress matrix ( ) appears in the display.  
/
Camera  
48  
     
7. When you are finished composing your message, press  
SEND to send the Picture message to the intended  
recipient(s).  
Resolution — Indicates/changes the Camera resolution  
setting (in pixels) [1280x960 (shown), 640x480 ),  
320x240 ), 176x144 )].  
(
(
(
Screen Layouts  
Camera Screen  
Note: The Size setting affects Zoom. When Camera resolution is set to  
1280x960 pixels, Zoom is not available.  
When you activate your phone’s camera,  
the top two lines of the display are reserved  
for camera icons (when active). The center  
of the display shows a viewfinder image of  
the subject at which the camera is pointed.  
Night Shot — Indicates/changes whether your phone is  
ready to take photos in low light: Off (shown) or On  
(
).  
Self Timer in use — Delays the camera shutter for 2/5/10  
seconds (10 Sec. shown) after you press the Camera key  
(
).  
Quality — Indicates/changes camera’s picture quality  
setting (Fine shown). Other options are: Normal ) and  
Economy ).  
White Balance — Indicates/changes the current photo  
White Balance setting [Auto (shown), Sunny ), Cloudy  
), Tungsten ), Fluorescent )].  
Color Effects — Replaces the natural colors with shades  
Camera Screen Icons  
(
The following icons appear in the Camera screen when the Icon  
(
Display Camera setting is set to Display All  
.
Mode — Indicates Camera mode is active.  
(
(
(
(
Shooting Mode — Indicates/changes Camera shooting  
mode to take Single pictures (shown) or multiple pictures  
of a selected color (Normal Black&White, Sepia, Negative,  
or Green).  
,
in Series Shot  
or in Frame Shot mode (  
(
) or Divided Shot  
).  
(
) succession,  
Settings — Displays/changes Camera Settings which let  
you select Icon Display (Display All / Guidelines / No  
Icons), View Mode (Landscape / Portrait), Shutter Sound  
Note: The Series Shot option also sets whether the Camera takes Series Shot  
or Divided Shot pictures in quick succession (Auto) or one each time  
you press the Camera key (Manual).  
49  
     
(Off / Shutter / OK / DingDong), photo Auto Save (On / Off), Reset  
Settings (Yes / No).  
• Send — Send the currently highlighted or displayed image as part  
of a Picture Message or Via Bluetooth connection.  
• Online Album — Send a copy of the currently highlighted or  
displayed image to your account on your Wireless Provider’s server.  
Zoom — Enlarges the image from x00 (normal) to x09  
.
• Set As — Assign the currently highlighted or displayed image as  
the Main Wallpaper, as the Picture ID for a Contact, or the Front  
Wallpaper.  
Brightness — Brightens or darkens the image from 4 to  
+4.  
Phone Memory — Indicates photos will be stored in the  
phone’s memory.  
• Rename — Change the name of the picture file.  
• Lock/Unlock — Prevent/allow erasure of the currently highlighted  
or displayed image.  
Photo Limit — Indicates the available number of photos  
you can take. (Depending on the camera Resolution and  
Quality settings.)  
• Erase Files — Delete one or more marked images from the My  
Images folder.  
The Photo Gallery  
Saved pictures are stored in the My Images folder. You can  
browse the pictures one at a time (expanded mode), or view  
several pictures at once in thumbnail format.  
• Image Info — View the Name, Date and Time created, Resolution,  
and Size of the currently highlighted or displayed image.  
5. Select the desired option to perform its function or to enter  
its sub-menu.  
1. In the Camera viewfinder screen, press My Images. Any  
pictures that you’ve saved are listed with their thumbnail  
images in the display.  
2. To launch the Camera and take new pictures, press  
Camera  
.
3. To view a picture, press VIEW  
.
4. For more options, press Options. The following additional  
options pop-up:  
Camera  
50  
     
Section 9: easyedgeSM  
SM  
SM  
With easyedge , you can download multimedia, applications,  
The easyedge shop tab lets you locate, purchase (when  
games, and check news and sports.  
required), and download an application, ringtone, or other  
multimedia files.  
Tip: You can access easyedgeSM Games home page directly from Standby  
mode by tapping the Menu soft key, then selecting Games  
.
Launching an Application  
SM  
1. In the easyedge screen, press  
Note: easyedgeSM from U.S. Cellular is only available on approved phones  
and requires an easyedgeSM data plan. Visit www.uscellular.com/  
easyedge or call U.S. Cellular customer service (by dialing 611 on your  
the Navigation key Right.  
phone) and ask about easyedgeSM  
.
The my stuff tab shows, listing  
any applications (apps) you have  
downloaded.  
SM  
Accessing easyedge  
SM  
With easyedge , you can download  
full featured applications over the air  
including games, personalized ring  
tones, pictures, and more.  
2. Select the application you wish  
to run.  
Finding and Downloading Applications  
In Standby mode, press Menu  
), then select easyedge  
– or –  
1. In Standby mode, tap the Menu soft key, then select  
(
.
SM  
easyedge. The easyedge screen appears in the display  
SM  
with the easyedge shop tab showing.  
Press the Navigation key Down.  
2. Follow the prompts to locate, purchase (when required),  
and download an application, ringtone, or other  
multimedia files.  
SM  
The easyedge screen appears in the display with the  
SM  
easyedge shop tab showing.  
51  
           
Section 10: Toneroom  
Toneroom is a pre-loaded application that lets you access your  
Wireless Carrier’s on-line source for real music ringtones.  
Accessing Toneroom  
In Standby mode, press Menu  
), then select Toneroom.  
(
The Tone Room home page  
appears in the display.  
Follow the links on the Tone  
Room home page to find,  
purchase (if needed), and  
download ringtone files.  
Managing Your Tones  
In the Tone Room home page,  
select the My Tones tab. The My  
Tones page appears in the  
display.  
For more information about Tone Room,  
contact your Wireless Provider.  
Toneroom  
52  
     
Section 11: Multimedia  
Use your SCH-r330 phone’s Camera to take full color digital  
pictures, display them on your phone’s vivid color display, and  
instantly share them with family and friends.  
To take new photos, press Camera  
To expand an image to fill the screen, highlight it and press VIEW  
).  
.
(
My Images Options  
With Mobile Shop, you can download personalized ringtones,  
pictures, and more. For more information, contact your Wireless  
Provider.  
From the My Images list, access other options by pressing  
Options. The following options appear:  
Accessing Multimedia  
Send — Send image as part of a Picture message or via Bluetooth  
connection to another device. (See “Send Picture Messages in  
Standby Mode” on page 37 for more information.)  
In Standby mode, press Menu, then select Multimedia.  
The following Multimedia feature sub-menus appear in the  
display.  
Online Album — Send image as part of a Picture message to your  
Online Album (for more information contact your Wireless Provider).  
Set As — Assign a highlighted or displayed image as the Main  
Wallpaper, as the Picture ID for a Contact, or the Front Wallpaper.  
Rename — Change the name of the picture.  
Camera  
Lets you launch and set up your phone’s camera. (For more  
Using My Images  
Lock Unlock — Prevent/allow erasure of the currently highlighted or  
/
displayed image.  
My Images lets you manage your photos and pictures you  
download, and lets you choose the pictures that appear in your  
phone’s display when you turn it on or off, while in Standby mode  
(wallpaper), and as image IDs for your contacts.  
Erase Files — Delete one or more marked images from the My Images  
folder.  
Image Info — View the Name, Date and Time created, Resolution, and  
Size of the currently highlighted or displayed image.  
From the Multimedia menu, select My Images. A multiple-  
page matrix of thumbnail views of saved photos and  
images appears in the display.  
53  
         
2. When you select Record New,  
the Record New screen appears  
in the display.  
Using My Ringtones Gallery  
My Ringtones lets you assign ringtones for calls, alarms, and  
other alerts.  
To start recording a voice memo,  
press REC ).  
1. In Standby mode, press Menu, then select Multimedia ➔  
(
My Ringtones. A list of ringtones appears in the display.  
To pause/resume recording, press  
Pause  
2. Highlight a ringtone. You have the following options:  
.
To assign the highlighted ringtone to be used as a Ringtone, a  
Contact ID, or an Alert Tone, press Set As  
To stop recording and save the voice  
memo, press SAVE ).  
.
(
To hear the ringtone, press PLAY ).  
(
3. When you highlight a saved voice memo file, you have the  
To show title and file type for the highlighted ringtone, press Info  
.
following options:  
Using My Sounds Gallery  
My Sounds lets you record and manage voice memo files and  
assign melodies as ringers or alerts.  
To erase the selected voice memo file, if it is unlocked, press  
Erase  
.
To listen to the voice memo, press PLAY  
(
).  
Press Options, and the following options appear in the display:  
1. In Standby mode, press Menu, then select Multimedia ➔  
Send — Send to someone as part of a Picture Message or Via  
My Sounds.  
The following options appear in the display:  
Record New — Lets you record voice memos.  
Set As — assign the highlighted ringtone to be used as a Ringtone  
Contact ID, or as the Alert Tone  
Rename — Change the name of the voice memo file.  
Lock Unlock — Block/permit erasure of the highlighted voice memo.  
,
A list of recorded voice memo files and melodies.  
.
/
Erase all — Erase all unlocked voice memos.  
Sound Info — Shows the title, size, type, and date for the file.  
Multimedia  
54  
   
4. When you highlight a melody file, you have the following  
options:  
To hear the ringtone, press PLAY  
(
).  
Press Options to show the following options:  
Send — Send to someone as part of a Picture message. (See “Send  
information.)  
Set As — assign the highlighted ringtone to be used as a Ringtone  
,
Contact ID, or as the Alert Tone  
.
Erase all — Erase all unlocked melodies.  
Sound Info — Shows the title, size, type, and date for the file.  
55  
Section 12: Bluetooth  
Bluetooth wireless technology is a short-range wireless  
communications technology capable of exchanging information  
over a distance of about 30 feet without a physical connection.  
Bluetooth set to off” appears in the display and the and  
the Bluetooth On icon ( ) disappears.  
Registered List  
This list shows all Bluetooth wireless technology devices paired  
with your handset, and indicates whether any device is  
connected with your handset.  
In Standby mode, press Menu, then select Bluetooth.  
Turn Bluetooth On/Off  
When Bluetooth is turned on, you can answer and place calls and  
send or receive information via Bluetooth.  
From the Bluetooth menu, select Registered List.  
Note: If Bluetooth is off, you are prompted to “Turn bluetooth on?”. Press Yes  
Note: To save battery life or in situations where Bluetooth use is prohibited,  
such as airline traveling, you can turn off the Bluetooth wireless  
technology headset.  
to turn Bluetooth on.  
To leave Bluetooth off and return to the Bluetooth sub menu, press  
No.  
To turn Bluetooth support on:  
A list of registered Bluetooth  
devices or the Add New Device  
screen appears in the display.  
From the Bluetooth menu, select Bluetooth Settings ➔  
Enable or select Registered List Add New Device. You  
are prompted to “Turn bluetooth on?” by pressing Yes  
.
Add (Pair With) a New Device  
1. From the Registered List, select  
Bluetooth set to on” and the red Bluetooth On icon (  
appear in the display.  
)
Add New Device.  
To turn Bluetooth support off:  
From the Bluetooth menu, select Bluetooth Settings ➔  
Disable.  
Bluetooth  
56  
       
Place device you are connecting to in discoverable  
mode” appears in the display. (See the device user manual  
for more information.)  
Managing Your Registered List  
From the Registered List, highlight a device and press  
Options. The Options menu lets you Remove or Rename  
this device, Discover which Bluetooth profiles apply,  
review the Device Information, and Send a Name Card  
(Contact information) to this device.  
2. Press OK  
(
). Names of available devices appear in the  
display.  
3. Highlight the device you want and press PAIR ( ). You  
are prompted to enter the passkey or PIN for the selected  
device. (See the device user manual for the passkey or  
PIN.)  
Bluetooth Settings  
The Bluetooth Settings menu provides the ability to view and  
change the device name, show the visibility, and set the security  
for the device.  
4. Enter the device passkey or PIN and press  
. Once  
pairing completes, you are prompted to connect with the  
device.  
To access Bluetooth settings:  
From the Bluetooth menu, select Bluetooth Settings. The  
5. To connect with the device, press Yes. To return to the  
following options appear in the display:  
Bluetooth menu without connecting to the device, press  
• Enable Disable Turns Bluetooth on or off. (For more  
/
No.  
Connecting to a Registered (Already Paired) Device  
1. From the Registered List, highlight the device and press  
• DiscoveryMode — Select On for other devices to see your device,  
or Off for no visibility.  
.
• Device Name — Shows the handset name. You can change this  
name. Enter the text and press  
.
2. If you are unable to connect with the device a pop-up  
• Supported Profiles — Lists and describes the Bluetooth profiles  
appears in the display. Press Yes to retry.  
your phone supports.  
Disconnecting from a Bluetooth Device  
• Device Info — Shows the Bluetooth Type, Status, and Address of  
your phone.  
From the Registered List, highlight the device and press  
Off.  
57  
 
Section 13: Tools  
This section explains how you can use your phone’s Personal  
Information Manager (PIM) functions to view today’s calendar,  
schedule appointments, set an alarm, perform simple math  
calculations, and more.  
Voice Settings — Lets you tailor Vsuite to better respond to your  
voice and your phone use preferences. See “Digit Dialing” on  
page 59 for more information.  
2. Select the desired sub-menu.  
Voice Command  
Accessing Your Phone’s Tools  
To launch the Tools menu:  
To access the Voice Command menu, do one of the following:  
In Standby mode, press and hold  
From the Tools menu, select Voice SVC  
Say a Command” appears in the display and plays through the  
earpiece, followed by a list of available commands.  
.
In Standby mode, press Menu, then select Tools.  
Voice Command.  
Voice SVC  
Voice SVC Options  
Your SCH-r330 includes Nuance Vsuite, state-of-the-art voice  
recognition software that lets you use your voice to dial numbers,  
access your Contacts list, and open Tools. To access your  
phone’s voice recognition, do the following:  
Note: You can also set your phone to start VoiceSignal when you connect an  
optional headset to the phone. (For more information, see “Voice  
The following voice commands appear in the display:  
1. From the Tools menu, select Voice SVC. The following  
Call — Call a Contact by saying the name saved in your Contacts list.  
Call any telephone number, even if not saved in your Contacts list, by  
saying the digits in the number. (See “Voice Dialing” on page 19 for  
more information.)  
options appear in the display:  
Voice Command — Lets you place calls, access your Contacts  
List, review your appointments, and more by speaking commands  
into your phone. Also see “Voice Dialing” on page 19 and  
“Voice Method” on page 28 for more information.  
Send Text — Lets you access Create Text Message.  
Send Picture — Lets you access Create Picture Message.  
Tools  
58  
           
Lookup — Lets you find a Contact by name and review the Contact’s  
information.  
From the Voice Settings menu, select Choice Lists. The  
available options are:  
Go to — Lets you access the following features and functions of your  
Automatic — Vsuite displays a choice list only when it does not  
recognize a spoken name or number.  
phone: Contacts  
Multimedia Tools  
Check — Lets you say a single command (such as “Status”) to verify  
your phone's: Status Signal Coverage Battery, or My phone #  
,
Calls  
,
Messages  
,
easyedge, Display  
,
Sounds,  
,
,
Settings  
,
Calendar  
,
Bluetooth, and Toneroom  
.
Always On — Vsuite always displays a choice list, even when  
there is only one choice.  
Always Off — Vsuite never displays a choice list.  
,
,
,
.
Sensitivity  
Note: Speaking clearly, say the command that you want to use. If VoiceSignal  
does not recognize a command, it prompts you to repeat the  
1. From the Voice Settings menu, select Sensitivity.  
command. If VoiceSignal still does not recognized the command, it  
tells you “Sorry, no match found” and cancels voice recognition.  
2. Use the Up and Down navigation keys to adjust the  
selected Sensitivity setting incrementally between Reject  
More spoken commands or names and Reject Less  
spoken commands or names.  
Voice Command Tips:  
Make sure you wait for the beep before speaking.  
Digit Dialing  
Speak clearly at a normal volume, as if you were talking on the phone.  
If you regularly have trouble with Vsuite not recognizing the  
numbers you speak, adapting can improve the accuracy of digit  
recognition, especially for people with strong regional accents.  
Voice Settings  
To access the Voice Settings menu:  
From the Tools menu, select Voice SVC Voice Settings.  
Note: After you adapt Digit Dial, your phone is customized to your voice, and  
your voice only. Others will not be able to use it unless they Reset the  
phone to factory defaults.  
Choice Lists  
When Vsuite cannot recognize a name or number, it displays a  
choice list of up to three possible choices, and prompts you to  
confirm the correct one. To change the way Vsuite uses choice  
lists:  
Tips for Adapting Digit Dialing  
Use Adapt Digits in a quiet place.  
Wait for the beep before starting to speak.  
59  
       
Speak clearly, and say each digit distinctly.  
Repeat this step until you’re satisfied with the recording.  
If you make a mistake while recording a sequence of digits, or if there  
is an unexpected noise that spoils the recording, re-record that  
sequence.  
4. After confirming that the recording sounds “ok”, continue  
the recording process with the next set of digits.  
5. After 10 sets of digits, the phone asks whether you want to  
Only adapt digits if you are regularly having problems with digit dialing.  
Once you adapt, digit dialing will not work as well for other people  
using your phone. (You can always Reset digit adaptation to its original  
state, as described below.)  
do more adaptation.  
If you answer “Yes,” repeat steps 4 and 5 for another 10  
sets of digits. After the second group of 10 sets of digits,  
Adaptation complete” plays through the speaker and  
you are returned to the Digit Dialing menu.  
Adapt Digits  
To adapt digit dialing, do the following:  
Reset Digits  
1. From the Voice Settings menu, select Digit Dialing ➔  
Adapt Digits. Your phone displays text describing the  
Adapt Digits process.  
To reset digit dialing to factory default settings, do the following:  
1. From the Voice Settings menu, select Digit Dialing ➔  
Reset Digits. The phone prompts you to confirm digit  
reset.  
2. Press . Your phone displays the first digit sequence and  
Please say” plays through the speaker followed by the  
four digits appearing in the display.  
2. Press OK to reset your digit adaptation, or press Back to  
cancel.  
3. Wait for the beep and say the digits using your normal tone  
of voice. After a moment, the phone plays back the  
Sound  
Sound lets you specify what (if any) text prompts you want your  
phone to read to you through the earpiece.  
recording and prompts “Did the recording sound ok?”  
If the recording was good, say “Yes.”  
1. From the Voice Settings menu, select Sound. The following  
If you need to re-record, say “No.”  
options appear in the display:  
If you say “No,” the phone prompts you to pronounce the  
digits again. Wait for the beep and then say the digits.  
Prompts — On/Off — Enables or disables audio prompts.  
Digits — On/Off — Enables or disables digit playback.  
Tools  
60  
 
Names — On/Off — Enables or disables name playback.  
The About Nuance screen appears in the display showing  
the version level of the Vsuite software currently installed  
on your phone.  
Name Settings — Lets you adjust the Speed  
(
Faster or Slower  
)
and Volume  
(Louder or Softer) of your phone’s audio name  
playback.  
Memo Pad  
2. Select the desired option and the desired setting, or press  
Create notes and store them in Memo Pad. Notes that you create  
in Return to Memo Pad anytime to review and edit your notes.  
to accept the new setting. Press  
to discard the  
new setting and return to the Sound menu.  
Note: Memo Pad can’t be prioritized or assigned an alert.  
Voice Launch  
To set the key or action that launches Nuance Vsuite, do the  
following:  
From the Tools menu, select  
Memo Pad. If you have any  
stored memos, they appear as a  
list in the display.  
1. From the Voice Settings menu, select Voice Launch. The  
following options appear in the display:  
Key Only — Press and hold  
to activate Vsuite for one call.  
Create a Memo  
1. From the Memo Pad list, press  
Key/Ear Mic — Attach a headset to your phone. Press and hold  
to activate Vsuite. Now, you can make and end calls using  
VoiceSignal by pushing the button on the headset.  
Add.  
2. Enter memo text using the  
Key/Flip — Press and hold  
for one call.  
or open the flip to activate Vsuite  
keypad.  
2. Press  
to accept the new setting. Press  
to discard  
Tip: The current mode of text entry is indicated in the lower right corner of  
the display.  
the new setting and return to the Voice Settings menu.  
About  
3. To save the memo, press OK  
(
).  
From the Voice Settings menu, select About.  
Review, Edit, and Erase Memos  
1. From the Memo Pad list, highlight the desired memo.  
61  
           
You have the following options:  
2. To set the alarm Off or On, press the Navigation key Left/  
Right or use the Left/Right arrow keys.  
To add a new memo, press Add. (For more information, refer to  
3. Enter the time for the alarm, then use press the Navigation  
key Left/Right or use the Left/Right arrow keys to select  
AM or PM, the alarm Frequency (Daily, Mon.-Fri.,  
Weekends, or Once), the Ringer type (Tone, Vibrate,  
Light Only), and the ringtone (from My Ringtones or My  
Sounds).  
To review the highlighted memo, press VIEW  
(
).  
While viewing a memo, you can do any of the following:  
Change the text of the memo by pressing Edit and using the keypad  
Return to the Memo Pad screen by pressing OK  
(
).  
Press Options to Erase the memo you are viewing, Add a New Memo,  
4. Press SAVE  
(
). If the alarm is set to On, the alarm icon  
or Lock/Unlock the memo you are viewing.  
(
) appears in the top line of the display.  
To Edit or Erase a memo, Erase all memos, or Lock / Unlock a  
memo, press Options and select the desired options.  
When an Alarm Sounds  
An animated alarm clock appears in the display along with  
Snooze and Dismiss options and an alert sounds when the  
specified time for the alarm arrives.  
Alarm Clock  
Your phone has three alarm clocks that  
can be set to go off once, or to recur  
daily at a specific time.  
To silence the alarm, use the Navigation key to highlight Snooze or  
Dismiss and press  
If the alarm was set as a Daily alarm, the alarm icon remains in the top  
of the display.  
.
Note: The alarm doesn’t function when the  
phone is turned off. If the time for an  
alarm that was set for Once has elapsed  
while the phone is off, the alarm occurs  
at the specified time on the next day.  
If the alarm was set as a Once only alarm, the alarm icon disappears  
from the top of the display.  
Turn Off the Alarm  
1. From the Tools menu, select  
1. From the Tools menu, select Alarm Clock.  
Alarm Clock Alarm 1 /  
2
/
3.  
Tools  
62  
       
2. Highlight the desired alarm (Alarm 1 /  
2
/
3
), then press  
Locate and view a particular time zone by pressing the  
Navigation key Left or Right until the desired time zone  
appears in the display.  
Options and select to turn the alarm On / Off (without  
changing the settings), to Reset the Alarm and restore its  
settings to default values, or to Reset All of the alarms and  
their settings to default values.  
To set the displayed time zone as the default time zone for the  
second World Time clock, press  
.
To return to the Tools menu without changing the default time  
zone, press  
World Time  
.
World Time lets you view the time of day or night in any of the 24  
different time zones around the world.  
Selecting a Home Zone  
To change home (upper) time zone or location, do the following:  
Note: To use World Time, you need to subscribe to your Wireless Provider’s  
1. In the World Time screen, display the time zone you wish to  
digital service.  
make your Home Zone.  
2. Press Options and select Set as home zone  
Enable Daylight Saving Time (DST)  
1. Display the desired time zone.  
2. Press DST Off / DST On.  
.
From the Tools menu, select  
World Time. A world map  
appears in the display, showing  
the time and date in one or two  
cities or time zones.  
3. To accept the highlighted setting, press  
.
Selecting/Displaying Time Zones  
Calculator  
World Time lets you view the time and  
date in up to two locations or time  
zones.  
You can perform calculations, including addition, subtraction,  
multiplication and division using your phone.  
Viewing a Time Zone  
Note: You must use the phone keypad to use the Calculator.  
To view the time and date in a particular time zone or location, do  
the following:  
63  
           
1. From the Tools menu, select  
Calculator. The Calculator  
1. From the Tools menu, select Stop Watch. The Stop  
Watch screen appears in the display.  
screen appears in the display.  
2. To start, stop, and resume the  
2. Enter the first number in your  
calculation using the keypad.  
(Numbers can be up to 15 digits  
long. Up to 3 of the digits can be  
after a decimal point.)  
stopwatch count, press  
.
3. At the start of each succeeding  
event/lap, press Record to  
record the completion time for  
the previous event/lap. You can  
record up to eight event/lap  
times.  
To enter a decimal point, press  
.
To change the sign for a number to a negative, press  
.
4. To reset the stop watch and to  
To add parentheses [( )] to your calculation or to enter a Power  
exponent (^), such as, 3^2, which is the equivalent of 32, press  
erase all stop watch (lap) times recorded, press Reset.  
Operator  
.
Converter  
Press Clear to clear current entries.  
The Converter lets you covert one measure of the available  
3. Select a type(s) of calculation.  
categories (Currency  
,
Length, Weight, Volume, Area, and  
[
[
[
[
x
] Multiplication — Press Navigation key Up.  
] Division — Press Navigation key Down.  
] Addition — Press Navigation key Right.  
Temperature) into another.  
÷
+
-
] Subtraction — Press Navigation key Left.  
4. Enter the other number(s) and press  
to perform the  
calculation and view the result.  
Stop Watch  
You can use this function to set a stop watch.  
Tools  
64  
   
1. From the Tools menu, select  
Converter Currency Length  
Weight Volume Area  
Temperature  
To save the changed exchange rate, press OK  
To discard the change, press Cancel  
(
).  
/
/
.
/
/
/
Currency — Adding Exchange Rates  
.
You can use the Currency Converter to  
convert from and to obscure currencies  
by adding exchange rates for these  
currencies.  
2. Use the Navigation/Arrow keys  
to select the units to be  
converted From and To.  
3. Enter the quantity you want  
1. From the Tools menu, select  
converted in the From field. The  
converted quantity appears in the To field.  
Converter Currency.  
2. To open the EXCHANGE RATE  
Note: To include a decimal point, press  
.
list, press Rate.  
3. Press Add. The ADD EXCHANGE  
Currency — Reviewing/Editing Exchange Rates  
RATE screen appears in the display with the Base field  
The Currency Converter includes long-term average exchange  
rates as default values.  
highlighted.  
4. Use the Left and Right navigation/arrow keys to select the  
1. From the Tools menu, select  
Base currency to be converted from.  
Converter Currency.  
5. Highlight the Currency field, and enter an identifier of up  
to 5 characters for the new currency using either keypad.  
2. To open the EXCHANGE RATE  
list, press Rate.  
3. To edit an Exchange Rate:  
Press Edit.  
6. Highlight the Exchange Rate field, and enter a decimal  
exchange rate for the new currency using either keypad.  
Highlight an exchange rate, and  
enter any changes.  
65  
Individual payment (for groups)  
Note: To enter the decimal point, press  
.
1. From the Tools menu, select Tip Calculator. The Tip  
Calculator screen appears in screen, with the Bill field  
highlighted.  
The Exchange Rate field only accepts up to five digits after the  
decimal point.  
2. Use the keypad to enter the total  
7. Press SAVE  
(
) to save the new exchange rate.  
amount of the bill.  
Currency — Erasing Exchange Rates  
3. If needed, highlight the Tip field,  
You cannot erase the preloaded currencies from the Exchange  
Rate list. You can erase a currency that you have added to the list  
by doing the following:  
and enter a tip percentage.  
4. If needed, highlight the # Paying  
field, and enter the number of  
persons paying.  
1. From the Tools menu, select Converter Currency.  
2. Press Rate. The EXCHANGE RATE list for the From  
5. The amount of the Tip, the final  
currency appears in the display.  
Total, and the amount Each  
person should pay appear in the lower half of the screen.  
3. Use the Up and Down navigation keys to highlight the user-  
added currency exchange rate to be erased.  
4. Press Erase. You are prompted to confirm the erasure.  
Note: The Erase soft key is undefined for preloaded Exchange Rates. This  
prevents you from erasing them.  
5. To erase the exchange rate, press Yes. To keep the  
exchange rate, press No.  
Tip Calculator  
Tip Calculator automatically calculates the following amounts:  
Gratuity (tip)  
Tools  
66  
 
Section 14: Calendar  
Calendar allows you to view the current, past, or future month in  
calendar format. While viewing the calendar, the current date is  
highlighted, and days with scheduled events are surrounded by a  
box.  
3. To display the highlighted event,  
press VIEW ( ).  
To change the event details, press  
Edit. (See “Add a New Event” .)  
To return to the Events list, press OK  
View an Event  
(
).  
1. In Standby mode, press Menu  
,
For more options, press Options  
.
then select Calendar. A calendar  
appears in the display with the  
current date highlighted. The  
month and year appear at the top  
of the display.  
You can return to the Monthly  
calendar or Erase this event from the  
calendar.  
Add a New Event  
1. From the Calendar, press Add.  
2. To move around within the  
2. To highlight New Event options,  
press the Navigation key Up or  
Down.  
calendar, use these keys:  
To move to an individual day, one day or one week at a time, use  
the Navigation key, Jog Wheel, or Arrow keys.  
3. Enter the Name of the new event.  
To view previous months, press the Up volume key.  
To view future months, press the Down volume key.  
To add an event to the highlighted date, press Add  
To call up a list of events on the highlighted date, press VIEW  
To access other options while viewing the calendar, press Options  
.
Note: The current mode of text entry is indicated in the lower left corner of  
(
).  
the display.  
.
You can Go to a Date by entering it, return to Today’s date, Erase  
one or more Old events, or all events.  
67  
         
4. Enter the Start Date, using leading zeros (such as, 03) and  
a 4-digit year (such as, 2009).  
5. Enter the Start Time, using leading zeros (such as, 03).  
Press the Navigation key Left or Right to select AM or PM  
.
6. Repeat Steps 4 and 5 for the End Date and End Time.  
7. To select values for the Alert type, Alert tone, Reminder  
and Alert time options, use the Left and Right Navigation  
keys or arrow keys.  
,
8. To store the event in your calendar, press SAVE  
(
).  
Tip: An alarm will notify you prior to the event, provided you set Reminder to  
a value other than Off.  
Calendar  
68  
Section 15: Changing Your Settings  
This section explains how to configure your phone’s language,  
network preferences, security options, and other settings.  
Clock Format  
Clock lets you choose whether and in what format the time and  
Display Settings  
Display settings let you change your phone’s menu appearance,  
display brightness and contrast, and display content to better  
meet your needs.  
date appear as the Main Clock  
[Samsung, Digital (default), Analog,  
Off] and/or the Front Clock Digital (default) or Off] on your phone.  
[
Note: The Clock Format setting for the Front Clock automatically changes to  
Off when you change the Wallpaper setting for the Front Display. (For  
To launch the Display menu:  
In Standby mode, press Menu, then select Display.  
Theme  
The Display menu appears in the display.  
Theme lets you choose the color scheme [Samsung (the default)  
or Plush] used to display menu screens, pop-up menus and  
messages.  
Menu Style  
Menu Style lets you choose whether the Main Menu appears as  
an Icon matrix (the default value) or as a List of menus.  
Dialing Font Size  
Wallpaper  
Dialing Font Size lets you choose the size of the numbers [Normal  
(the default) or Large] that appear in the display when you place a  
call.  
Wallpaper lets you choose images to appear in the background  
on your phone’s Main Display and Front Display while in Standby  
mode. You can choose from downloaded images in your My  
Images folder or from the Preset Images folder.  
Banner  
Create your own 13-character personal greeting that appears in  
the display while your phone is in Standby mode.  
Note: When you select Front Display, your Wallpaper selection automatically  
changes the Clock Format setting for the Front Clock to Off. (For more  
69  
                 
(Silence All, Low, Low/Medium, Medium, Medium/High, or  
High) or vibrate mode (Vibrate, or Vib. on / Vib. off soft key).  
Tip: Press and hold  
to erase an existing banner, if necessary. (For more  
Ringer Type  
Backlight  
Use the Ringer Type sub-menu to select ringtones, melodies, or  
recorded sounds to play as ringers for Voice Calls and Messages  
(Text, Picture, and Voicemail) alerts. You can play each ringtone,  
melody, or recorded sound before you select one.  
You can separately set the Main Display Keypad, and/or Charging  
,
backlight to remain on for 10, 15, or 30 seconds; to be Always On  
as long as the folder is open; or to be Always Off. You can also set  
the Brightness of the backlight for your displays and keypad.  
Alerts  
Note: Prolonged backlight use drains your battery faster.  
You can set your phone to sound an alert for each elapsed minute  
during a call, whenever you enter or leave your home service  
area, whenever you connect or disconnect a call, or when you  
power your phone on or off.  
Front Contrast  
Front Contrast lets you set the Front display contrast to enhance  
its readability.  
Key Tone  
Sounds Settings  
Sounds settings let you customize your phone’s audio properties,  
such as ringers, keypad tones, alerts, start up melody, and more.  
Lets you adjust the volume level and duration of the tones that  
the keypad generates when you press the keys.  
Call and Phone Settings  
The Call Settings options let you select how your phone handles  
voice and data calls. The Phone Settings options let you tailor  
your phones basic operations.  
To launch the Sounds menu:  
In Standby mode, press Menu, then select Sounds.  
The Sounds menu appears in the display.  
Master Volume  
To launch the Settings menu:  
In Standby mode, press Menu, then select Settings.  
Use the Master Volume screen to set the default volume for Voice  
Calls ringers, Messages alerts, and Alarms to the desired level  
The Settings menu appears in the display.  
Changing Your Settings  
70  
                   
Auto Retry  
Location Setting  
You can set your phone to pass Global Positioning System (GPS)  
data to identify your location to the network continually (Location  
On) or only when you make an emergency (911) call (911 Only).  
Auto Retry automatically re-dials a number at an interval you  
select, when there is no answer or the dialed party is busy.  
Depending upon your location, the number of times your phone  
redials a number may vary.  
Note: Check with your Wireless Carrier to determine if/when/where location-  
TTY Mode  
based services are available.  
Your phone is fully Teletypewriter (TTY)/Telecommunication  
Device for the Deaf (TDD) compatible. You connect TTY/TDD  
equipment to the headset connector on the top of your phone,  
behind the folder hinge. You can set your phone to allow TTY/TTD  
communication while you converse with the other party, or you  
can limit voice communication to Talking or Hearing only.  
Call Settings  
The Call Settings sub-menu lets you set call options such as Auto  
Retry, Data rates for data calls, and more.  
Call Answer  
You can set your phone to answer incoming calls only when you  
press  
; when you press any key on the keypad except  
, or ; or when you open the flip.  
,
Note: TTY Mode must be enabled before you can use your phone with TTY/  
TDD equipment.  
The TTY Mode option has no effect on the phone’s earpiece,  
microphone, or speaker. When you select TTY Full, all currently  
enabled sound functions remain enabled.  
Call Alert  
You can set you phone to indicate an incoming call by ringing  
only, by displaying a Caller ID and ringing, or by repeating the  
caller’s name (Contacts only).  
Voice Privacy  
Voice Privacy lets you choose what level of voice security  
Auto Answer  
(Standard or Enhanced) your phone will use.  
Auto Answer lets you set your phone to automatically answer  
calls after from 1 to 5 seconds.  
71  
                 
Shortcut Key  
Tip: You can change your Voice Privacy setting during a call by using the In-  
Use Menu options. (See “In-Use Menu” on page 21 for more  
information.)  
Shortcut Key lets you set which feature, function, or application  
launches when you press the Navigation key Up while in Standby  
mode.  
You can set your phone to alert you when Voice Privacy support  
Language  
International Dialing  
The Language option lets you select the language (English or  
Español) of menus, sub-menus, and other user-interface  
features.  
International Dialing lets you choose a frequently-dialed country  
code for dialing by the International Dialing shortcut. (For more  
information on using the International Dialing shortcut, see “Call  
Security  
Use the Security sub-menu to lock your phone, set up emergency  
numbers, enable or disable voice privacy, set restrictions, and  
other security options.  
Phone Settings  
You can set or reset the operating characteristics of your phone  
to suit your location and/or to limit access to your phone.  
To access the Security sub-menu, you are prompted to enter your  
phone’s four-digit lock code.  
Airplane Mode  
When set to On, Airplane Mode disables all radio functions of  
your phone. This blocks you from making or receiving calls other  
than Emergency (911) calls, but allows you to use other features  
(such as the camera and the Tools) safely in sensitive  
environments, such as on board an aircraft.  
Note: The default lock code is the last four digits of your mobile phone  
number.  
Lock Phone  
The Lock Phone option lets you Lock or Unlock your phone  
immediately or set your phone to lock itself On Power Up.  
Tip: If you need to make an emergency call with Airplane mode enabled, just  
Locking the r330 blocks all outgoing calls except those to 911  
and to any other user-programmed emergency numbers. You can  
dial the emergency number and press  
.
Changing Your Settings  
72  
             
Emergency #  
lock the phone manually, or set the phone to lock automatically  
when turned on. In Lock mode, you can answer calls, but you  
must unlock the phone to place calls (except to emergency  
The Emergency # option lets you enter and store up to three  
emergency numbers in your phone. Each number can be up to 32  
digits long. You can dial your emergency numbers any time, even  
when your phone is locked or restricted.  
Important!: If after setting your phone to Lock itself On Power Up, you change  
the NAM Selection setting from NAM1 to NAM2, but there is no  
number programed into NAM2, you won’t be able to access your  
phone. You must call your Wireless Provider’s Service Center to  
unlock your phone.  
Note: Emergency number 911 is hard-coded into your phone. You can dial  
this number any time, even when the phone is locked or restricted. If  
you call 911 you will hear audible tone and an Emergency prompt will  
appear in the display for the duration of the call.  
Change Lock  
Important!: Because of various transmission methods, network parameters,  
and user settings used to complete a call from your wireless  
phone, a connection cannot always be guaranteed. Therefore,  
emergency calling may not be available on all wireless networks  
at all times.  
The Change Lock option lets you replace your phone’s default  
lock code (the last four digits of your phone number) with one of  
your own choosing.  
It is advisable to change the default lock code to a secret code for  
security purposes.  
Important!: DO NOT depend on this phone as a primary method of calling  
911 or for essential or emergency calls.  
When you select Change Lock, your are prompted to enter the  
current lock code followed by entering your new lock code, and  
then re-entering it, for verification.  
Remember to always turn your phone on and check for adequate  
signal strength before placing an emergency call.  
Note: Your phone does not allow you to view the lock code for obvious  
security reasons. If you change the lock code, be sure to write down or  
memorize the new code.  
Note: When you dial an emergency number, you phone locks itself to the  
emergency location that answered the call and locks itself in 911-Only  
mode, blocking from dialing any number but an emergency number.  
73  
       
To store emergency numbers: Select the Emergency # option, then  
select one of the three emergency number options, and enter and save  
your new emergency number.  
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.  
Invoking Reset Phone may erase settings made by your Wireless  
Carrier from your phone, resulting in loss of service.  
To call emergency numbers (even in lock mode): Simply enter 911 or  
Erase All Entries  
one of your emergency numbers and press  
to place the call.  
The Erase All Entries option deletes all entries from the Contacts  
list.  
Emergency Ringback  
Emergency Ringback lets you enable or disable the alert tone  
your phone plays during an Emergency call.  
Restriction  
The Restriction option settings let you restrict/unrestrict the use  
of your phone for Calls (Incoming and Outgoing), SMS (Text)  
Tip: This feature can be valuable during emergency situations, such as, a  
home invasion. Disabling the Emergency call alert tone can prevent a  
home invader from locating you by means of that tone.  
Messages  
,
MMS (Picture) Messages, and/or restrict/unrestrict  
access to your your phone’s IP (Internet Protocol) Connection  
.
1. From The Security sub-menu, select Emergency  
Note: All default restriction settings are Allow All (unrestricted).  
Ringback. The following options appear in the display:  
On — Your phone plays an audible alert tone during Emergency  
calls.  
NAM Selection  
The NAM Selection option lets you select your preferred system  
Off Your phone does not play an audible alert tone during  
(NAM 1 or NAM 2), provided your phone has a NAM 2 number  
Emergency calls, but does vibrate.  
programmed into it. (For more information, contact your Wireless  
Provider.)  
2. Select the desired Emergency Ringback setting.  
Reset Phone  
Important!: If after setting your phone to Lock itself On Power Up, you change  
the NAM Selection setting from NAM 1 to NAM 2, but there is no  
number programed into NAM 2, you won’t be able to access your  
phone. You must call your Wireless Provider’s Service Center to  
unlock your phone.  
The Reset Phone option returns all settings on your phone (except  
for Contacts entries) to their factory default values.  
Changing Your Settings  
74  
           
System Select  
In Standby mode, just press the number keys that correspond to  
the first few letters of a Contact name, then press the Navigation  
key Up (to find a matching Contact).  
The System Select option lets you disable (Home Only) or enable  
(Automatic) your phone’s ability to roam (that is, automatically  
Memory Info  
select a network to use when outside of your Home Area).  
Memory Info options let you review the total phone memory  
used and available, and the phone memory used to store images,  
ringtones, recorded sound files, applications, and Picture  
messages. Memory Info options also let you review and erase  
files from your My Images, My Ringtones, and My Sounds  
folders.  
Set Time  
Use the Set Time options to set the current time and date  
displayed on your phone and used by your phone’s Tools. (For  
Note: In digital service mode, the Set Time feature is disabled. The network  
adjusts time and date automatically.  
Phone Info  
With Airplane Mode set to On, the Set Time feature is enabled.  
Phone Info lets you review the phone number assigned to your  
phone, reference the meanings of icons that appear on your  
phone’s Standby mode screen, and identify the hardware and  
software versions of your phone, the easyedge software, and  
the assigned MEID and pESN numbers.  
Enter the current Time using your keypad:  
The hour and minute must be entered using two digits each. You must  
enter the hour in 12-hour format.  
SM  
Use the Left and Right navigation keys to select am or pm  
.
Enter the current Date using your keypad:  
The month and day must be entered using two digits each.  
The year must be entered with all four digits.  
Quick Search  
When set to On, the Quick Search option provides an easy way  
to find Contacts from Standby mode.  
75  
           
Section 16: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. These safety precautions should be followed to  
safely use your phone.  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations, the National  
Counsel on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
For body worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
Health and Safety Information  
76  
       
contains no metal and that positions the handset a minimum of  
1.5 cm from the body.  
Please Note the Following Information When  
Using Your Handset  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
1. WARNING REGARDING DISPLAY  
The display on your handset is made of glass or acrylic and  
could break if your handset is dropped or if it receives  
significant impact. Do not use if screen is broken or  
cracked as this could cause injury to you.  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
2. WARRANTY DISCLAIMER: PROPER USE OF A TOUCH SCREEN  
HANDSET  
Head: 0.72 W/Kg.  
Body-worn: 0.40 W/Kg.  
If your handset has a touch-screen display, please note  
that a touch-screen responds best to a light touch from the  
pad of your finger or a non-metallic stylus. Using excessive  
force or a metallic object when pressing on the touch-  
screen may damage the tempered glass surface and void  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile phones and genuine  
Samsung accessories.  
1-800-822-8837 for more information.  
77  
   
What kinds of phones are the subject of this update?  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines.  
The term wireless phone refers here to hand-held wireless  
phones with built-in antennas, often called "cell," "mobile," or  
"PCS" phones. These types of wireless phones can expose the  
user to measurable radio frequency energy (RF) because of the  
short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission  
safety guidelines that were developed with the advice of FDA and  
other federal health and safety agencies.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD  
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY  
DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF  
exposure decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE  
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER  
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS  
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Do wireless phones pose a health hazard?  
Consumer Information on Wireless Phones  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe.  
Wireless phones emit low levels of radio frequency energy (RF) in  
the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode.  
The U.S. Food and Drug Administration (FDA) has published a  
series of Questions and Answers for consumers relating to radio  
frequency (RF) exposure from wireless phones. The FDA  
publication includes the following information:  
Health and Safety Information  
78  
     
Whereas high levels of RF can produce health effects (by heating  
tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of  
low level RF exposures have not found any biological effects.  
Some studies have suggested that some biological effects may  
occur, but such findings have not been confirmed by additional  
research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for  
inconsistent results.  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to  
the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human  
health.  
FDA belongs to an interagency working group of the federal  
agencies that have responsibility for different aspects of RF  
safety to ensure coordinated efforts at the federal level. The  
following agencies belong to this working group:  
What is FDA's role concerning the safety of wireless  
phones?  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Under the law, FDA does not review the safety of radiation-  
emitting consumer products such as wireless phones before they  
can be sold, as it does with new drugs or medical devices.  
However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level  
that is hazardous to the user. In such a case, FDA could require  
the manufacturers of wireless phones to notify users of the  
health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that  
are sold in the United States must comply with FCC safety  
guidelines that limit RF exposure. FCC relies on FDA and other  
health agencies for safety questions about wireless phones.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a  
number of steps, including the following:  
79  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF  
exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless  
phones.  
phones, so we don't know with certainty what the results of such  
studies mean for human health.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any  
possible association between the use of wireless phones and  
primary brain cancer, glioma, meningioma, or acoustic neuroma,  
tumors of the brain or salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
Base stations are thus not the primary subject of the safety  
questions discussed in this document.  
What are the results of the research done already?  
However, none of the studies can answer questions about long-  
term exposures, since the average period of phone use in these  
studies was around three years.  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research  
methods. Animal experiments investigating the effects of radio  
frequency energy (RF) exposures characteristic of wireless  
phones have yielded conflicting results that often cannot be  
repeated in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of  
the studies that showed increased tumor development used  
animals that had been genetically engineered or treated with  
cancer-causing chemicals so as to be pre-disposed to develop  
cancer in absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies  
of people actually using wireless phones would provide some of  
the data that are needed. Lifetime animal exposure studies could  
be completed in a few years. However, very large numbers of  
animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists.  
Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-  
up may be needed to provide answers about some health effects,  
such as cancer.  
Health and Safety Information  
80  
This is because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if they do -  
may be many, many years. The interpretation of epidemiological  
studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations.  
CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The  
CRADA will also include a broad assessment of additional  
research needs in the context of the latest research  
developments around the world.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
FDA is working with the U.S. National Toxicology Program and  
with groups of investigators around the world to ensure that high  
priority animal studies are conducted to address important  
questions about the effects of exposure to radio frequency  
energy (RF).  
If there is a risk from these products - and at this point we do not  
know that there is - it is probably very small. But if you are  
concerned about avoiding even potential risks, you can take a  
few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a  
wireless phone will reduce RF exposure.  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs  
that has driven the establishment of new research programs  
around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the source  
of the RF, since the exposure level drops off dramatically with distance.  
For example, you could use a headset and carry the wireless phone  
away from your body or use a wireless phone connected to a remote  
antenna.  
FDA and Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
81  
Again, the scientific data do not demonstrate that wireless  
phones are harmful. But if you are concerned about the RF  
exposure from these products, you can use measures like those  
described above to reduce your RF exposure from wireless phone  
use.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that hands-  
free kits reduce risks. Hands-free kits can be used with wireless  
phones for convenience and comfort. These systems reduce the  
absorption of RF energy in the head because the phone, which is  
the source of the RF emissions, will not be placed against the  
head. On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in  
the U.S. are required to meet safety requirements regardless of  
whether they are used against the head or against the body.  
Either configuration should result in compliance with the safety  
limit.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of  
wireless phones, including children and teenagers. If you want to  
take steps to lower exposure to radio frequency energy (RF), the  
measures described above would apply to children and  
teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the  
RF source will reduce RF exposure.  
Some groups sponsored by other national governments have  
advised that children be discouraged from using wireless phones  
at all. For example, the government in the United Kingdom  
distributed leaflets containing such a recommendation in  
December 2000.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that  
accessories that claim to shield the head from those emissions  
reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone.  
They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to  
limit wireless phone use by children was strictly precautionary; it  
was not based on scientific evidence that any health hazard  
exists.  
Health and Safety Information  
82  
Studies have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields"  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption. In February 2002, the Federal trade  
Commission (FTC) charged two companies that sold devices that  
claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims.  
sponsored by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and performance  
requirements for hearing aids and wireless phones so that no  
interference occurs when a person uses a compatible phone and  
a compatible hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful  
interference be found to occur, FDA will conduct testing to assess  
the interference and work to resolve the problem.  
According to FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(Updated 1/1/2010):  
Radio frequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped  
develop a detailed test method to measure electromagnetic  
interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now  
part of a standard sponsored by the Association for the  
Advancement of Medical instrumentation (AAMI). The final draft,  
a joint effort by FDA, medical device manufacturers, and many  
other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI. FDA has tested  
wireless phones and helped develop a voluntary standard  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
83  
International Commission on Non-Ionizing Radiation Protection:  
3. Position your wireless phone within easy reach. Be able to  
access your wireless phone without removing your eyes  
from the road. If you get an incoming call at an  
Health Protection Agency:  
inconvenient time, let your voice mail answer it for you.  
US Food and Drug Administration:  
4. Let the person you are speaking with know you are driving;  
if necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice and even heavy  
traffic can be hazardous.  
http://www.fda.gov/Radiation-EmittingProducts/  
HomeBusinessandEntertainment/CellPhones/default.htm  
5. Do not take notes or look up phone numbers while driving.  
Jotting down a "to do" list or flipping through your address  
book takes attention away from your primary  
responsibility, driving safely.  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of wireless  
phones, one that every user must uphold.  
6. Dial sensibly and assess the traffic; if possible, place calls  
when you are not moving or before pulling into traffic. Try  
to plan calls when your car will be stationary. If you need to  
make a call while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
When driving a car, driving is your first responsibility. When using  
your wireless phone behind the wheel of a car, practice good  
common sense and remember the following tips:  
1. Get to know your wireless phone and its features, such as  
speed dial and redial. If available, these features help you  
to place your call without taking your attention off the road.  
7. Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with  
aware you are driving and suspend conversations that  
have the potential to divert your attention from the road.  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other  
local emergency number in the case of fire, traffic accident  
or medical emergencies.  
Health and Safety Information  
84  
 
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or  
other local emergency number, as you would want others  
to do for you.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one  
appears injured, or a vehicle you know to be stolen, call  
roadside assistance or other special non-emergency  
number.  
Prolonged exposure to loud sounds (including music) is the most  
common cause of preventable hearing loss. Some scientific  
research suggests that using portable audio devices, such as  
portable music players and cellular telephones, at high volume  
settings for long durations may lead to permanent noise-induced  
hearing loss. This includes the use of headphones (including  
headsets, earbuds, and Bluetooth or other wireless devices).  
Exposure to very loud sound has also been associated in some  
studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
"The wireless industry reminds you to use your phone safely when  
driving."  
For more information, please call 1-888-901-SAFE, or visit our  
.
Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of  
sound produced by a portable audio device varies depending on  
the nature of the sound, the device settings, and the headphones  
that are used. As a result, there is no single volume setting that is  
appropriate for everyone or for every combination of sound,  
settings and equipment.  
Important!: If you are using a handset other than a standard numeric keypad,  
please call 1-888-901-7233.  
Provided by the Cellular Telecommunications & Internet  
Association.  
85  
   
You should follow some commonsense recommendations when  
using any portable audio device:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Voice: (800) 222-2336  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
You can obtain additional information on this subject from the  
following sources:  
Health and Safety Information  
86  
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating position  
(held to your ear with the antenna pointing over your shoulder if  
you are using an external antenna).  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
UsingYourPhoneNearOtherElectronicDevices  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone. Consult the manufacturer to discuss alternatives.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless phone and an implantable medical  
device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
1-888-232-6348 TTY  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch your phone off whenever it is forbidden to use  
it, or when it may cause interference or danger.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their  
implantable medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
When connecting the phone or any accessory to another device,  
read its user's guide for detailed safety instructions. Do not  
connect incompatible products.  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
87  
     
Should turn the phone OFF immediately if there is any reason to  
suspect that interference is taking place;  
The wireless telephone industry has developed a rating system  
for wireless phones, to assist hearing device users find phones  
that may be compatible with their hearing devices. Not all phones  
have been rated. Phones that are rated have the rating on their  
box or a label located on the box.  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless phone with such a device, consult your health care  
provider.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
For more information see:  
FCC Hearing-Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless phones under the Hearing Aid Compatibility  
Act of 1988 (HAC Act) to require digital wireless phones be  
compatible with hearing-aids.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to generate less interference to hearing devices than  
phones that are not labeled. T4 is the better/higher of the two  
ratings.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities.  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a  
buzzing, humming, or whining noise. Some hearing devices are  
more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless phone rating values are then added together.  
Health and Safety Information  
88  
       
A sum of 5 is considered acceptable for normal use. A sum of 6  
is considered for best use.  
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your phone off in  
health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
Vehicles  
In the above example, if a hearing aid meets the M2 level rating  
and the wireless phone meets the M3 level rating, the sum of the  
two values equal M5. This is synonymous for T ratings. This  
should provide the hearing aid user with "normal usage" while  
using their hearing aid with the particular wireless phone.  
"Normal usage" in this context is defined as a signal quality that  
is acceptable for normal operation.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M  
and T marks are recommended by the Alliance for  
Switch your phone off in any facility where posted notices require  
you to do so.  
Telecommunications Industries Solutions (ATIS). The U and UT  
marks are referenced in Section 20.19 of the FCC Rules.  
89  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
in such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
To make an emergency call:  
Users are advised to switch the phone off while at a refueling  
point (service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
3. Press the  
key.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
If certain features are in use (call barring, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your phone may be the only means of communication at the  
scene of an accident; do not cut off the call until given  
permission to do so.  
Emergency Calls  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee connection in all  
conditions. Therefore, you should never rely solely on any  
wireless phone for essential communications (medical  
emergencies, for example).  
Health and Safety Information  
90  
   
Restricting Children's access to your Phone  
Cautions  
Your phone is not a toy. Children should not be allowed to play  
with it because they could hurt themselves and others, damage  
the phone or make calls that increase your phone bill.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
phone warranty if said accessories cause damage or a defect to  
the phone.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to  
stop using the phone if such interference cannot be eliminated.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
Vehicles using liquefied petroleum gas (such as propane or  
butane) must comply with the National Fire Protection Standard  
(NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association:  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
NFPA (National Fire Protection Agency)  
1 Batterymarch Park  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
Quincy, Massachusetts  
USA 02169-7471  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both installed  
or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
91  
   
Switch your phone off before boarding an aircraft. The use of wireless  
phone in aircraft is illegal and may be dangerous to the aircraft's  
operation.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's  
turned on, it receives and transmits radio frequency (RF) signals.  
When you use your phone, the system handling your call controls  
the power level. This power can range from 0.006 watts to 0.2  
watts in digital mode.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
Maintaining Your Phone's Peak Performance  
The quality of each call you make or receive depends on the  
signal strength in your area. Your phone informs you of the  
current signal strength by displaying a number of bars next to the  
signal strength icon. The more bars displayed, the stronger the  
signal.  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Faulty service may void the  
warranty.  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
If you're inside a building, being near a window may give you  
better reception.  
To ensure that the Hearing Aid Compatibility rating for your phone is  
maintained, secondary transmitters such as Bluetooth and WLAN  
components must be disabled during a call. For more information,  
Understanding the Power Save Feature  
If your phone is unable to find a signal after searching, a Power  
Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability or you can check it  
yourself by pressing any key.  
If your phone is equipped with an external antenna, hold the phone  
with the antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
Anytime the Power Save feature is activated, a message displays  
on the screen. When a signal is found, your phone returns to  
standby mode.  
If your phone is equipped with an internal antenna, obstructing the  
internal antenna could inhibit call performance.  
Speak directly into the phone's receiver.  
Health and Safety Information  
92  
 
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it is inoperable, call Customer Care for service.  
If you use the phone near the network's base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Availability of Various Features/Ring Tones  
Follow battery usage, storage and charging guidelines found in the  
user’s guide.  
Many services and features are network dependent and may  
require additional subscription and/or usage charges. Not all  
features are available for purchase or use in all areas.  
Downloadable Ring Tones may be available at an additional cost.  
Other conditions and restrictions may apply. See your service  
provider for additional information.  
Battery charging time depends on the remaining battery charge and  
the type of battery and charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
Battery Standby and Talk Time  
If left unused, a fully charged battery will discharge itself over time.  
Standby and talk times will vary depending on phone usage  
patterns and conditions. Battery power consumption depends on  
factors such as network configuration, signal strength, operating  
temperature, features selected, frequency of calls, and voice,  
data, and other application usage patterns.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave the battery  
connected to a charger for more than a week, since overcharging may  
shorten its life.  
Battery Precautions  
Do not use incompatible cell phone batteries and chargers. Some Web  
sites and second-hand dealers, not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you  
suspect damage to the phone or battery, take it to a service center for  
inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in  
serious safety hazards.  
93  
     
Misuse or use of incompatible phones, batteries, and charging devices  
could result in damage to the equipment and a possible risk of fire,  
explosion, leakage, or other serious hazard.  
Do not crush, puncture or put a high degree of pressure on the battery  
as this can cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some  
areas, the disposal of batteries in household or business trash may be  
prohibited. For safe disposal options for Li-Ion batteries, contact your  
nearest Samsung authorized service center. Always recycle. Do not  
dispose of batteries in a fire.  
Extreme temperatures will affect the charging capacity of your battery:  
it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily not  
work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will help  
you fulfill any warranty obligations and allow you to enjoy this  
product for many years.  
0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as on or  
near a cooking surface, cooking appliance, iron, or radiator.  
Keep the phone and all its parts and accessories out of the reach of  
small children.  
Do not get your phone or battery wet. Even though they will dry and  
appear to operate normally, the circuitry could slowly corrode and  
pose a safety hazard.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and - terminals of the battery (metal strips on the  
battery), for example when you carry a spare battery in a pocket or  
bag. Short-circuiting the terminals may damage the battery or the  
object causing the short-circuiting.  
Do not use or store the phone in dusty, dirty areas, as its moving parts  
may be damaged.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
Do not permit a battery out of the phone to come in contact with metal  
objects, such as coins, keys or jewelry.  
Health and Safety Information  
94  
 
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving parts and  
prevent proper operation.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized antennas  
or modified accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
95  
Section 17: Warranty Information  
Standard Limited Warranty  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the original purchaser ("Purchaser") that SAMSUNG's  
Phones and accessories ("Products") are free from defects in  
material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
This Limited Warranty covers batteries only if battery capacity  
falls below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals on the  
battery are broken or show evidence of tampering, or (iii) the  
battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number  
What are SAMSUNG's Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG's sole  
option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
Warranty Information  
96  
       
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and  
the sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-  
4357. Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall  
become the property of SAMSUNG.  
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY  
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and  
labor charges for the repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED  
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND  
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
97  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO  
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY  
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR  
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY  
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
Warranty Information  
98  
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
End User License Agreement for Software  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
99  
 
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
shall cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge  
and agree that use of the Software is at your sole risk and that  
the entire risk as to satisfactory quality, performance, accuracy  
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND  
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND  
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS  
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)  
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH  
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF  
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS  
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,  
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,  
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG  
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR  
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS  
CONTAINED IN THE SOFTWARE WILL MEET YOUR  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
Warranty Information  
100  
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL  
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE  
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN  
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG  
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.  
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON  
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE  
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.  
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO  
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL  
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THIS LIMITATION MAY NOT APPLY TO YOU.  
11. LIMITATION OF LIABILITY. Notwithstanding any damages that  
you might incur for any reason whatsoever (including, without  
limitation, all damages referenced herein and all direct or general  
damages in contract or anything else), the entire liability of  
Samsung under any provision of this EULA and your exclusive  
remedy hereunder shall be limited to the greater of the actual  
damages you incur in reasonable reliance on the Software up to  
the amount actually paid by you for the Software or US$5.00. The  
foregoing limitations, exclusions and disclaimers (including  
Sections 9, 10 and 11) shall apply to the maximum extent  
permitted by applicable law, even if any remedy fails its essential  
purpose.  
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN  
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN  
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,  
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF  
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY  
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR  
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF  
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,  
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH  
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF  
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION  
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,  
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
101  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
shall not be governed by the UN Convention on Contracts for the  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
Customer Care Center:  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Precautions for Transfer and Disposal  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Warranty Information  
102  
Phone: 1-888-987-HELP (4357)  
©2010 Samsung Telecommunications America. All rights  
reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
103  
Index  
Erase Logs 23  
Incoming 22  
Missed 22  
A
C
Accessing Call and Phone Settings 70  
Accessing Your Phone’s Tools 58  
Adding a New Contacts Entry  
Dial Method 25  
Menu Method 26  
Adjust  
Calculator 63  
Calendar  
Outgoing 22  
View an Event 67  
Call and Phone Settings Menu  
Accessing 70  
Call Answer 20, 71  
Store Numbers 24  
Calls Menu 22  
Camera  
Photo Gallery 50  
Taking Pictures 47  
Canned Message Text  
Editing and Entering 45  
Change Lock 73  
Contacts 25  
Add Pauses 30  
Adding 25  
Deleting 35  
Edit Name and Numbers 29  
Editing 29  
Erase All 74  
Key Tone 70  
Alarm Clock  
Call Functions  
Answering a Call 20  
Making a Call 17  
Call Notification Types 20  
Call Settings  
When an Alarm Sounds 62  
Alarm clock  
Turn Off the Alarm 62  
Alerts 70  
Auto Answer 71  
Auto Retry 71  
Call Answer 71  
Auto Answer 71  
Auto Retry 71  
International Dialing 72  
TTY Mode 71  
Voice Privacy 71  
Call Timer 23  
B
Backlight 70  
Banner 69  
Battery 4  
Charging 5  
Finding 27  
Groups 32  
Memory Info 35  
Opening 25  
Call Waiting 21  
Calls  
Call Timer 23  
Low Battery Indicator 6  
Removal 5  
Travel Adapter 5  
Data Counter 24  
104  
   
Saving Call Numbers 26  
Speed Dial 31  
Create Messages 36  
Emergency Numbers 73  
Entering Text  
Inbox Folder 40  
Inbox, Reviewing Messages 40  
Incoming Calls Menu 22  
International Calls 18  
International Dialing 72  
L
Entering Symbols 16  
Using Abc Mode 16  
Using T9 Mode 15  
Erase All Entry 74  
Erase Logs 23  
D
Data Counter 24  
Data, View Counters 24  
Dialing Font Size 69  
Display 69  
Language 72  
Erase Messages 44  
Lock Code, Changing 73  
Lock Phone 72  
M
Memory Info 75  
Memory Management 75  
Message Folder  
Draft Box 41  
Inbox 40  
Outbox 41  
Voice 40  
Voicemail 40  
Message folder  
outbox 41  
Message Folders  
Erase Messages 44  
Message Settings, General 45  
Messages  
G
Display Screen Icons 11  
Display Setting  
Dialing Font 69  
Display Settings  
Backlight 70  
Banner 69  
Dialing Font Size 69  
Front Contrast 70  
Theme 69  
Gallery, photo 50  
Games 51  
General Message Settings 45  
Getting Started  
Activating Your Phone 6  
Understanding this User Manual 4  
Voicemail 7  
Go Back One Menu 13  
GPS Setting 71  
H
Wallpaper 69  
Draft Folder 41  
Draft Messages 41  
E
easyedgeSM 51  
Edit Contacts Name and Numbers 29  
Emergency 73  
HAC 88  
Health and Safety Information 76  
I
Icons  
Number Type 25, 26  
Emergency #s in Lock Mode 74  
Creating 36  
Ignore Calls 21  
105  
Messages and Lock Mode 39  
Missed Calls Menu 22  
M-Ratings 88  
System Select 75  
Photos  
Sending 48  
Reset Phone 74  
Restriction 74  
Security Sub Menu 72  
Settings  
Auto Answer 71  
Auto Retry 71  
Backlight 70  
Banner 69  
Call Answer 71  
Language 72  
Location Setting 71  
Memory Info 75  
Ringer Type 70  
TTY Mode 71  
Voice Privacy 71  
Volume 70  
Msg Setting Sub Menu 45  
Taking Multi Shot Pictures 48  
Taking Snap Shots 47  
Picture Message Settings 46  
Picture Messages  
Send in Camera Mode 36  
R
Receive Text Messages 39  
Reset Your Phone 74  
Restriction 74  
Return to Last Menu 13  
Reviewing Inbox 40  
Reviewing Outbox 41  
Ringer Type 70  
N
Navigation Key Shortcuts 13  
Notes and Tips 4  
Notes, Description 4  
Number Type Icons 25, 26  
O
Outbox Folder 41  
Outbox, Reviewing Messages 41  
Outgoing 22  
P
Pause Dial 18, 30  
Pauses, Adding 30  
Phone Safety 87  
Phone Settings  
Wallpaper 69  
S
Settings, Picture Messages 46  
Settings, Text Messages 46  
Silence Ringer 21  
Sound Settings  
Ringer Type 70  
Volume 70  
Standard Limited Warranty 96  
Store Emergency #s 74  
SAR values 76  
Save a Number After a Call 26  
Screen Layouts 49  
Security Settings  
Change Lock 73  
Emergency # 73  
Erase All Entries 74  
Lock Phone 72  
Airplane Mode 72  
Language 72  
NAM Selection 74  
Quick Search 75  
Security 72  
Set Time 75  
Shortcut Key 72  
106  
Store Numbers After a Call 26  
T
Taking pictures 47  
Text Conventions 4  
Text Entry Mode 15  
Changing 15  
Text Message Settings 46  
Text Messages, Receiving 39  
Three-Way Calling 17  
Timer, Calls 23  
Tip, Description 4  
Tools  
Add New Event 67  
Alarm Clock 62  
Calculator 63  
Memo Pad 61  
World Time 63  
Contacts Groups 32  
Deleting a Contacts Entry 35  
Editing an Existing Contacts  
Entry 29  
Finding a Contacts Entry 27  
Memory Info 35  
Listening to 7  
Volume 70  
W
Wallpaper 69  
Warranty Information 96  
World Time 63  
Save a Number After a Call 26  
Speed Dial 31  
Understanding Your Phone  
Closed View of Your Phone 8  
Display Screen 11  
Features of Your Phone 8  
Open View of Your Phone 9  
V
View an Event, Calendar 67  
Voice Privacy 71  
Voice Setting  
Tools Menu  
Accessing 58  
About VoiceSignal 61  
Choice Lists 59  
T-Ratings 88  
Sensitivity 59  
TTY Mode 71  
Sound 60  
Voice Launch 61  
Voicemail  
Checking 40  
Folder 40  
U
UL Certification 78  
Understanding Your Contacts  
Adding a New Contacts Entry 25  
107  

Xerox 6350 User Manual
Transcend Information StoreJet TS250GSJ25C User Manual
Toastmaster TCM12C User Manual
Seagate ST903204EXD101 RK User Manual
Seagate Momentus ST9320421ASG User Manual
Seagate Constellation ST32000644NS User Manual
PQI U350H User Manual
Pioneer DEH P6900UB User Manual
Philips AJ 3470 User Manual
Oregon Scientific RAR601 User Manual