|
SCH-N150
Series
P O R T A B L E
C E L L U L A R
T E L E P H O N E
User’s Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property
of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not
limited to, accessories, parts, or software relating thereto (the “Phone System”), is
proprietary to Samsung and protected under federal laws, state laws, and international
treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship. You may not
infringe or otherwise violate the rights secured by the Intellectual Property. Moreover,
you agree that you will not (and will not attempt to) modify, prepare derivative works of,
reverse engineer, decompile, disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its
suppliers.
Samsung Telecommunications America (STA), Inc.
Headquarters:
Customer Care Center:
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Fax: 972.761.7501
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972.761.7000
Fax: 972.761.7001
Internet Address: http://www.samsungusa.com
©2001 Samsung Telecommunications America, Inc. All rights reserved. No
reproduction in whole or in part allowed without prior written approval. Samsung
Telecommunications America, Inc. is a trademark of Samsung Electronics Corporation,
Ltd.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.
Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225;
5, 109, 390.
English: 2001:5:30. Version 3.0
Printed in South Korea
®
Openwave is a registered Trademark of Openwave, Inc.
®
RSA is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties;
Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE
ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND
SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF
THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE
INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS
WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS.
Introduction to the SCH-N150 phone
Congratulations on the purchase of your Samsung SCH-N150 phone. Using the
latest digital technology, the N150 phone operates on the same basis as other
wireless phones while providing superior resonance and tone quality.
The SCH-N150 phone is packed with productive features that are easy to use.
Here are some of them:
•
Operates in 1900 MHz digital CDMA, 800 MHz digital CDMA, and 800
MHz analog networks.
•
•
•
Voice Dialing – 20 Locations
Answer and end calls just by opening and closing the phone’s flip cover
User friendly display with dedicated icons for signal strength, service,
roaming, messages, vibrator, and battery
•
•
•
•
•
5 Monotone Ring Types, 15 Melody Tones
Distinctive ringer types for voice, message, and alarm calls
Distinctive ringer volumes for voice, message, and alarm calls
Phone Book Memory – 100 Locations
Call Logs – 10 Locations each for outgoing, incoming, and missed calls.
These 30 Call Log numbers are all easy to redial.
Two-Way Short Message Services (SMS) and Voicemail Notification
Internet MiniBrowser
Pause Dialing for tele-services
Fast Ringer Mute during Incoming Call
Alarm clock with programmable alarm
Last number redial – last 10 Numbers
One-touch Turbo dialing – 9 Locations
Two-touch Turbo dialing – 90 Locations
Three-touch Turbo dialing – 1 Location
•
•
•
•
•
•
•
•
•
•
•
Easily mute the microphone during conversation
Security features including Call Restriction, Emergency/Secret Number
capability, and Lock mode
Fax and Data capability
Selectable English/Spanish user interface
•
•
How To Use This User Guide
This user guide explains your Samsung N-150 phone operations through easy-
to-follow instructions and illustrations. Check out “Getting to know your
phone” on page 15 to get started understanding the functions of your phone.
You’ll find much of what you need to know about using your new Samsung
SCH-N150 phone right here.
We’ve included some important safety and usage information that you should
know before using your phone. You’ll find this information in “Usage
guidelines — all about performance and safety” on page 122.
If you still have questions, we’ll be happy to answer them. Just call our
Samsung Customer Care Center toll-free at 1.888.987.HELP (4357).
We hope you enjoy using your new Samsung SCH-N150 Series Phone, and
thanks for choosing Samsung.
Table of Contents
Backlight features................................................................. 15
C (Clear) key........................................................................ 15
Display screen...................................................................... 15
End (power on/off) key........................................................ 16
Front flip (phone cover) ...................................................... 16
Headset connector ............................................................... 16
LED indicator ....................................................................... 17
Menu key ............................................................................. 17
Microphone ......................................................................... 17
Numeric keypad ................................................................... 17
OK/Message key ................................................................... 17
Speaker................................................................................ 17
Send key............................................................................... 17
Toggle .................................................................................. 18
Adaptor outlet ...................................................................... 18
Getting Started.........................................................19
Getting service...................................................................... 19
Turning your phone on ........................................................ 19
Turning your phone off ........................................................ 19
Several ways to answer a call................................................ 20
List of main and sub menus.....................................21
Using your phone’s menus ................................................... 24
7
Accessing menus using the toggle..........................................24
Returning to the previous menu ............................................24
Accessing menus using shortcut numbers .............................25
Answer mode ........................................................................26
Digital mode..........................................................................26
Input modes..........................................................................26
Power save mode ..................................................................26
Silent mode...........................................................................27
Standby mode........................................................................27
Talk mode.............................................................................28
Vibrate mode.........................................................................28
The top line of the display screen............................ 29
Other phone icons................................................... 31
Using the battery...................................................... 32
Installing the battery..............................................................32
Removing the battery.............................................................32
Charging the battery ..............................................................33
Low battery indicator.............................................................33
The empty battery icon..........................................................33
Caring for the battery .............................................. 34
Protecting your battery..........................................................34
Disposal of Lithium Ion (Li-Ion) batteries.............................34
Using the travel adaptor .......................................... 35
Calls ........................................................................ 36
Outgoing ...............................................................................36
8
Incoming.............................................................................. 36
Missed.................................................................................. 37
Erase logs............................................................................. 37
Reviewing outgoing, incoming, or missed calls .........................38
Viewing call logs during a conversation.....................................39
Three way calling ................................................................. 39
Air time ................................................................................ 40
Last call................................................................................ 40
Total..................................................................................... 41
LifeTime ............................................................................... 41
Erase total ............................................................................ 42
Phone Book .............................................................43
Setting auto answer .............................................................. 43
Add entry.............................................................................. 44
Adding a phone number............................................................44
Adding a name ..........................................................................45
Adding a relation label ..............................................................45
Adding and changing a ring type ...............................................46
Overwriting a category ..............................................................46
Overwriting existing name and number information..................47
Setting secret.............................................................................47
Find name ............................................................................ 48
Find entry............................................................................. 49
Relation search .................................................................... 49
Adding an e-mail address ..................................................... 50
Editing an existing e-mail address ........................................ 51
Adding an e-mail address to an existing phone book entry ... 51
Adding pauses ...................................................................... 52
Storing pauses in a phone book entry................................... 52
9
Manual pause calling.............................................................53
Accessing your phone book during a conversation................54
Prepending a phone number.................................................55
Erasing individual phone book entries ..................................55
Adding a name ringer to your phone book entry ...................57
Setting speed dial ..................................................................58
Storing incoming phone numbers at the end of a call............59
Storing phone numbers from call logs...................................59
Shortcuts to storing phone numbers......................................60
One-touch dialing..................................................................60
Two-touch dialing .................................................................60
Shortcuts to memory dialing..................................................60
Web/Minibrowser .................................................... 61
A shortcut to launching the Web............................................61
Launching the minibrowser...................................................62
Exiting the web/minibrowser.................................................63
The minibrowser start and end prompts................................63
The minibrowser soft keys.....................................................63
Navigating the web.................................................................64
How the minibrowser works .................................................64
Using links ............................................................................66
Making a phone call while using the minibrowser.................66
Scheduler ................................................................ 67
Information features..............................................................67
10
How to access information features...................................... 67
Today ................................................................................... 67
How to schedule an event..................................................... 68
How to add, edit, or erase an event ...................................... 68
View month .......................................................................... 69
Jump to date......................................................................... 69
Using jump to date ............................................................... 69
Creating a to do list item....................................................... 70
How to view, edit, add or erase a to do list item ................... 70
How to view, edit, add or erase a count down timer ............. 71
World time ........................................................................... 71
Checking current time world wide........................................ 71
Calculator............................................................................. 72
To perform a calculation...................................................... 72
Alarm ................................................................................... 73
Sounds.....................................................................74
Ringer options...................................................................... 74
Adjusting ringer volume (rapidly) ........................................ 74
Adjusting voice volume during a call .................................... 74
Ringer volume...................................................................... 74
Ringer volume — Calls.............................................................75
Ringer volume — Alarm...........................................................75
Ringer type........................................................................... 75
Ringer type — Voice Calls ........................................................75
Ringer type — Alarm................................................................75
11
Ringer type — Schedule alerts.................................................. 76
Key beep................................................................................77
Alerts.....................................................................................77
Alerts — Minute beep............................................................... 77
Alerts — Service....................................................................... 78
Alerts — Connect ..................................................................... 78
Alerts — Disconnect................................................................. 78
Alerts — Fade........................................................................... 78
Alerts — Roam......................................................................... 79
Alerts — Privacy....................................................................... 79
Voice volume.........................................................................79
Roam ringer..........................................................................80
Power on/off .........................................................................80
Display .................................................................... 81
Backlight...............................................................................81
My phone #...........................................................................82
Language...............................................................................83
Set time.................................................................................83
Auto hyphen..........................................................................84
Version..................................................................................84
Voice dial................................................................. 85
Tips on recording names.......................................................85
Record..................................................................................85
Review...................................................................................86
Erase all................................................................................87
Set active...............................................................................87
Games...................................................................... 88
Flying tight.............................................................................88
12
Object .......................................................................................88
Run for money ..................................................................... 89
Object .......................................................................................89
Auto retry ............................................................................. 91
Auto answer ......................................................................... 91
Answer mode ....................................................................... 92
Tone length .......................................................................... 92
Set NAM................................................................................ 93
Set system............................................................................. 94
Receiving a fax ..........................................................................96
Changing your phone back to voice calling ...............................96
Ending a fax or data call............................................................97
Sending a fax or data file...........................................................97
Set network .......................................................................... 98
Audio AGC - whisper mode................................................... 98
Mail Kit....................................................................99
Mobile Originating (MO) SMS text messaging ...................... 99
Creating SMS Text Messages ............................................... 100
Entering text, numbers, and/or symbols ............................. 101
Alphabetical text entry ........................................................ 102
Entering numbers............................................................... 102
Symbol entry ...................................................................... 102
T9® Word text entry............................................................ 103
New messages .................................................................... 104
Voice.................................................................................. 105
13
Responding to a Message ....................................................105
Inbox ..................................................................................105
Reviewing outbox.................................................................... 105
Message memory capacity....................................................... 106
Messages and lock mode ........................................................ 107
Delivery acknowledgement...................................................... 107
Filed message......................................................................108
Web alert.............................................................................109
Erase message.....................................................................109
Scroll Timer............................................................................ 109
Msg. Reminder........................................................................ 110
Message Volume ..................................................................... 110
Ringer Type............................................................................. 110
Ringer Type — Voice Mail...................................................... 110
Ringer Type — Page............................................................... 110
Ringer Type — Text................................................................ 110
Ringer Type — Browser Msg.................................................. 111
New Message........................................................................... 111
Callback #............................................................................... 111
Save Message .......................................................................... 111
Entry Method .......................................................................... 111
Delivery Ack............................................................................ 111
Canned Msg. ........................................................................... 111
Receiving a message in standby mode .................................112
Receiving a message while on a call ....................................112
Reviewing voice mails and text messages.............................112
Reviewing stored voicemail & text messages in
standby mode......................................................................113
Message options..................................................................114
14
Lock mode ......................................................................... 115
Locking the phone...................................................................115
Unlocking the phone...............................................................116
Calling in lock mode ...............................................................116
Restricting the use of your phone ....................................... 116
Lockcode ........................................................................... 117
Emergency #’s.................................................................... 117
Storing emergency numbers....................................................118
Calling emergency numbers in lock mode...............................118
Send PIN ............................................................................ 119
Clear MEM ......................................................................... 119
Resetting your phone.......................................................... 120
Voice privacy...................................................................... 120
In-Use Menu ..........................................................121
15
Usage guidelines — all about
performance & safety............................................. 122
Understanding signal strength .............................................122
Understanding how your phone operates ............................122
FCC RF Exposure information..............................................123
Body-worn operation ..........................................................124
Vehicle mounted external antenna (if available) .................124
How to order accessories....................................................124
Turning off your phone in dangerous areas.........................126
Restricting children’s access to your phone.........................127
Maintaining your phone’s peak performance ......................127
Using your phone near other electronic devices..................128
Storing your phone..............................................................128
Your phone as a network device............................ 129
Acknowledging special precautions & the FCC & Industry
Canada Notice........................................................ 130
Information to user.............................................................130
Cautions..............................................................................131
FCC compliance information ...............................................131
Owner's record...................................................................131
Samsung phone/battery specifications.................................132
Samsung phone with standard battery .................................132
Samsung phone with extended battery.................................132
16
User guide proprietary notice............................................. 133
FDA consumer update ........................................................ 134
Index .....................................................................141
17
18
Getting to know your phone
Antenna
The antenna is a device for transmitting or receiving signals. The shape and
size of the antenna is determined, in part, by the frequency of the signals that
they receive. An antenna makes the call sound clearer when it is fully extended.
Use only in the normal position and do not touch the antenna unnecessarily
when the phone is active.
Backlight features
Your keypad has backlighting for easy visibility. For further information on this
feature see “Backlight” on page 81.
C (Clear) key
This
key is used to erase numbers or characters that may have been
incorrectly entered, or it can be used to return to a previous screen.
•
•
If an incorrect number or character has been entered on the display
screen, press once briefly, to erase it.
To erase all digits or characters from the display screen, press
for two seconds.
•
•
To back up one menu level, press
once, briefly.
To return to standby mode from any menu, press
seconds.
for two
Display screen
The display screen comprises of two areas, an upper line of stationary icons,
and the lower text and graphic area.
•
The top line of icons shown on the LCD (liquid crystal display), appear
according to the phone’s operating mode. For further information see
“Turning your phone on” on page 19.
21
•
The lower area of the LCD displays in-use information, for example (if
available), the calling party’s name and number, the call timer, Mute and
Call Waiting, as well as menus, sub menus etc.
End (power on/off) key
This
key is utilized in several ways:
•
Press and hold
Press and hold
Press
cancel any input.
to turn on your phone.
to turn off your phone.
•
•
once to disconnect a call or to return to standby mode and
Front flip (phone cover)
Closing your phone’s flip cover ends a call, except when you are sending new
messages from the Mail Kit menu, or wearing an earbud or headset. There are
several options that can be set when you open the phone’s flip cover:
•
•
•
Answer an incoming call: To set this option, and for further
information see “Answer mode” on page 92
Voice Dial an individual: To set this option, and for further
information see “Set active” on page 87.
Control the backlight: To set this option, and for further information
see “Backlight” on page 81.
Headset connector
This is where the optional hands free headset is connected. The headset
includes an earbud and microphone in a convenient, lightweight unit so you
can converse without using your hands. For further information see “How to
order accessories” on page 124.
•
Before inserting the hands-free headset connector to your phone, gently
pry open the top of the cover to expose the headset connector.
22
LED indicator
The LED indicator flashes to indicate an incoming call or message. When you
have the phone closed and the ringer set to off, the LED indicator will notify
you of an incoming call or message.
•
The LED indicator lights momentarily when you power up the phone.
Menu key
Press
to enter the menu facility.
Microphone
A typical microphone used for conversation and recording.
Numeric keypad
Use these keys to enter text, numbers, and special characters.
OK/Message key
When in the menu facility, the
key stores information that you have
entered, and also acts as an “OK” button when pressed. When in standby
mode,
functions as a Mail Kit menu access key to send messages and
review received messages.
Speaker
The speaker is for listening to voice conversations.
Send key
The
key performs several useful functions:
•
Press once to answer calls.
•
•
Enter a number and press
once, to connect.
Press twice in standby mode to redial the last outgoing number.
23
Toggle
The toggle
allows you to locate different menu options by pressing the
appropriate arrow.
When in standby mode the toggle can act as a hot key. You can locate the
Phone Book menu options by pressing the left arrow. You can access, and then
change the ringer volume by pressing either the up or down arrow, and
pressing the right arrow allows you to access the Web menu.
Adaptor outlet
The adaptor outlet is also used to connect your phone to a wireless data device
or a hands-free car kit (both sold separately). The adaptor outlet is located at
the bottom of the phone.
•
•
•
Before using, gently pry the cover from the bottom of the phone to
expose the adaptor outlet.
To charge your battery, plug the travel adaptor that is supplied with your
phone into a wall outlet.
Using your thumb and first finger, gently squeeze the two buttons located
on either side of the other end of the travel adaptor and insert the
adaptor into your phone’s outlet. The yellow arrow on the travel adaptor
should be facing upwards and pointing toward the phone.
•
When you unplug the travel adaptor from your phone, squeeze these
same two buttons, and pull gently on the adaptor to disconnect it from
the phone without causing damage to either device.
24
Getting Started
Getting service
You must contact the service carrier of your choice and follow their
instructions for obtaining service for your Samsung N150 phone. It is
suggested that you read this user guide to fully understand the services that
your phone supports.
Turning your phone on
When you are ready to turn your phone on, fully extend the antenna for the
clearest reception. Open the phone’s flip cover and press
, continue to
hold this key down for more than one second to power the phone on:
Note: Your phone has a built-in antenna. As with any other radio-transmitting device, do
not touch the antenna as it affects call quality and can cause the phone to operate at a
higher power level than is necessary.
The LED indicator momentarily lights, and a power-up alert sounds. The phone
begins searching for a network signal, when found, the date, day, and time
display, the phone enters standby mode. Your phone is now ready to place and
receive calls.
If the phone is out-of-service the
icon displays. If this happens you cannot
place or receive calls. You must try later when service becomes available. For
further information see “The top line of the display screen” on page 29
Turning your phone off
To turn your phone off, press and hold
down for more than two
seconds. Notice that when the phone is turned off, both the display screen and
the backlight remain off.
Note: If your phone is on, and
is pressed for less than one second, the phone
will not power off. This feature prevents your phone from being turned off accidentally.
25
Several ways to answer a call
When you receive a call, the phone will ring and the phone icon
is
displayed on your screen. If the caller can be identified, the caller’s phone
number, (or name if pre-stored in your Phone Book), is displayed. If the caller
cannot be identified, only the phone icon and “Call from Unavailable No” is
displayed. For further information see “Answer mode” on page 92.
There are several ways to answer an incoming call.
•
•
•
•
Open the phone’s flip cover.
Press
.
Press any key.
By setting the Auto Answer feature you can turn your phone to
automatically answer a call after the ringer sounds by selecting:
off, after 1 sec, after 3 sec, or after 5 sec.
(For further information see “Setting auto answer” on page 43.)
26
List of main and sub menus
This list displays the main menu structure, and shows the individual sub menus
and features assigned to each main menu option.
1:Calls
1:Outgoing
2:Incoming
3:Missed
4:Erase Logs
5:Air Time
Outgoing/Incoming/Missed/All
1:Last Call
2:Total
3:LifeTime
4:Erase Total
2:Phone Book
1:Find Name
2:Add Entry
3:Find Entry
4:RelationSrch
5:Add E-mail
3:Web
1:Get In Web
2:Prompt
None/To Start/To End/Both
4:Scheduler
1:Today
2:View Month
3:Jump To Date
4:To Do List
5:Count Down
6:World Time
7:Calculator
8:Alarm
5:Sounds
1:Ringer Vol
1:Calls
2:Alarm
2:Ringer Type
1:Voice Calls
2:Alarm
3:Data/Fax In
4:Schedule
3:Key Beep
27
4:Alerts
1:Minute Beep
2:Service
3:Connect
4:Disconnect
5:Fade
6:Roam
7:Privacy
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
5:Voice Volume
6:Roam Ringer
7:Pwr On/Off
On/Off
On/Off
6:Display
1:Backlight
2:Banner
Always Off/7 Seconds/15 Seconds/30 Seconds/Flip Open
3:My Phone #
4:Language
5:Set Time
6:Auto Hyphen
7:Version
Yes/No
7:Voice Dial
1:Record
2:Review
3:Erase All
4:Set Active
[*] Only, [*]/Flip
8:Games
9:Set Up
1:Flying tight
2:Run for Money
1:Auto Retry
2:Auto Answer
3:Answer Mode
4:Tone Length
5:Set NAM
6:Set System
7:Data/Fax
off/every 10 seconds/every 30 seconds/every 60 seconds
off/after 1 sec/after 3 sec/after 5 sec
By any key/By flip open/By send key
long/normal
NAM 1/NAM 2
Home only/Automatic-A/Automatic-B
data-fax off/fax for next call/fax until powered off/
data for next call/data until powered off
1-Time Analog Call/Automatic
On/Off
8:Set Network
9:Whisper Mode
0:Security
1:Lock Mode
2:Restrict
Never/On power up/Now
No/Yes
3:Lockcode
4:Emergency #
5:Send PIN
6:Clear MEM
7:Reset Phone
8:Voice Privacy
1/2/3
Never/Prompt
Proceed
Proceed
standard/enhanced
28
Mail Kit
1:New Messages
1:Send To
PhoneBook/T9 Word/ABC/Symbol/123
2:Message
3:Call Back
4:Options
Priority/Validity/Send Later/Delivery Ack/Message
SEND:Send Msg/OK:File Msg/CLR:Cancel/END:Quit
5:Action
2:Voice
3:Inbox
4:Outbox
5:Filed Msg
6:Web Alert
7:Erase Msg
1:Voice
2:OldInbox
3:NewInbox
4:Outbox
5:Filed
6:All Messages
8:Msg Setup
1:General
1:Scroll Timer
2:Msg. Reminder
3:Message Volume
4:Ringer Type
1:Voice Mail
2:Page
1/2/3/4/5 seconds/Off
Every 2 mins/Off/Once
3:Text
4:Browser Msg
2:New Message
1:Callback#
2:Save Message
3:Entry Method
4:Delivery Ack
5:Canned Msg.
0:Yes
Auto Save/Prompt Save/Do Not Save
T9 Word/Alphabet
On/Off
1:No
2:Call me
3:Need directions
4:Where are you?
5:Will call later
6:Busy
7:On my way
8:Will arrive 15 minutes
9:Thank you
In-Use Menu (Can be opened only when on a call)
1:Mute/Quit
2:Calls
Outgoing/Incoming/Missed/Erase Logs/Air Time
3:Phone Book
4:Silent/Quit
5:Send Tel #
6:My Phone #
7:Version
Find Name/Add Entry/Find Entry/RelationSrch/Add E-mail
8:Voice Privacy
SND:Send DTMF
29
Using your phone’s menus
The phone offers a range of functions that allow you to tailor the phone to your
personal requirements. These functions are arranged in menus and submenus.
The menus and submenus can be accessed by toggling or using shortcuts.
Accessing menus using the toggle
Menu options are numbered but can also be accessed by use of the toggle. To
use the toggle
, press your thumb repeatedly on the arrow in the
direction which you wish to go. Press right to go to the right, press down to go
forward, press left to go in that direction, and press up to go backwards
through the menu options. When your objective is reached, press
save or activate it. Below is an example of how to set the Connect tone.
to
1.
In standby mode, press
to
access the main menu options.
2.
Use your thumb to press the toggle
until the Sounds menu displays.
3. Press
to select this option.
4. Again, use your thumb to toggle
to highlight Alerts.
5. Press
6. Toggle
7. Press
to open the Alerts menu.
to highlight Connect.
to open the Connect menu.
toggle to highlight *On.
8. Use the down arrow on the
9. Press to save.
Note: *Should you wish to reset the Connect tone, toggle
to highlight Off.
Returning to the previous menu
•
When in most menu levels, you can return to the previous menu level by
pressing
You can also press
.
•
to exit the menu without saving the setting.
30
Accessing menus using shortcut
numbers
All main menus, menu levels, and menu content items are assigned numbers.
All menus and their contents can be accessed using these “Shortcut” numbers.
An example exercise for setting the Connect tone.
1. In standby mode, press
to access the main menu.
2. Press
3. Press
4. Press
5. Toggle
6. Press
for Sounds.
for Alerts.
for Connect.
to highlight *On.
to save.
Note: *Should you wish to reset the Connect tone, toggle
to highlight Off.
Note: For further details, see “List of main and sub menus” on page 21 for numbers
assigned to each menu and sub menu item.
31
Your phone’s modes
Answer mode
With this option activated, your phone will allow you to select a specific mode
when you receive an incoming call. For further information see “Several ways
to answer a call” on page 20.
Digital mode
Your phone has some features that work only in digital service areas, the
icon indicates that your phone is operating in digital mode. If the digital icon
is absent, your phone is operating in analog mode.
Input modes
Input modes are used for entering text, numbers and symbols into various
screens. For further information see “Entering text, numbers, and/or symbols”
on page 101.
Lock mode
When you lock your phone using the Lock Mode menu option, phone usage
becomes restricted. You can receive messages and calls, but you cannot make
an outgoing call until your phone is unlocked. You can unlock your phone, by
following the prompts and entering the lock code.
Power save mode
Your phone comes with a power save feature that automatically activates if your
phone is unable to find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge is conserved. The phone
automatically rechecks periodically for a signal. To manually force the phone
to recheck for a signal, press any key. A message on the display screen will
inform you when your phone is operating in the power save mode.
32
Silent mode
The “Silent Mode” feature allows you to instantaneously silence the ringer
when in standby mode.
•
•
With the phone in standby mode, press and hold
for 2 seconds.
“Entering Silent Mode” displays briefly. (The silent mode icon
displays on the standby screen.)
To exit from “Silent Mode” press and hold
for 2 seconds. The
screen prompt “Exit Silent Mode” displays, and your phone automatically
reactivates the previous ringer volume setting. (The silent mode icon
is removed from the standby screen.)
Standby mode
Standby mode is the fundamental state of your phone once your phone has
found service. Your phone goes into standby mode soon after you power it on,
.
or, if your phone is on, whenever you press
When in standby mode,
you will see the power up animation (the animation displayed when you turn
on your phone), service provider logo, month/date, (the day will display
between parentheses), and time. If a feature of your phone is activated, the
feature icon will also be displayed. Other active icons appear across the top
line of the display.
While in standby mode, enter a phone number, and press
to call it.
Press at any time to return to standby mode, but be careful; if you are
on a call when you press
disconnect your call.
, you will return to standby mode and
Messages can also be received when in standby mode, the alert tone will sound
(unless turned off), when a new message is received.
The menu is accessed when you are in standby mode by pressing
. For
further details see “List of main and sub menus” on page 21 for a listing of the
menu items.
33
Talk mode
You can place and answer calls only when your phone is turned on. When you
are on a call your phone is in Talk mode. Pressing
the In-Use menu options.
will give you a list of
Vibrate mode
In standby mode, press the up arrow on the toggle
to adjust the ringer
and silent modes.
to save. (The vibrate icon appears
volume (11 levels) which include 1-beep, vibrate,
When your phone vibrates, press
on the display.) To change the setting press the down arrow on the toggle to
adjust the ringer volume, and press
deleted from the display screen.
to save. The vibrate icon will be
34
The top line of the display screen
Display indicators (or icons) appear across the top of your phone’s display
screen. The signal strength and battery strength icons will always appear, but
other icons display based upon your phone’s operating mode.
.
Signal strength: This icon always appears when your phone is on,
and shows your current signal strength. More lines indicate more
signal strength. Four lines indicate maximum strength, and one line
indicates least strength.
Service indicator: This icon indicates a call is in progress. When
the phone is calling a number, this icon will flash until the call is
connected.
No service indicator: This icon indicates your phone cannot find a
signal because you’re outside a service area. When this is displayed,
you cannot make or receive calls. Wait a little while for a signal or
move into an open area.
Note: The no service indicator icon will always appear when you turn on your phone. As
soon as service is located, the indicator will disappear.
35
Roaming: This icon displays when the phone is outside your
carrier’s area and your phone is receiving service from another
carrier’s network.
If you are:
• In your home service area, this indicator will not display.
•In a preferred analog or digital roaming area (where your service
provider has a roaming agreement in place), this indicator will be
on, but not flashing.
•In an analog or digital area that is not covered by your phone’s own
service provider, this indicator will be on.
New Message: This icon appears when a new voice, text, page or
Web alert message has been received.
Digital mode: This icon indicates your phone is operating in digital
mode. Your phone has some features that work only in a digital
service area; these services include the Web Browser and certain
other message(s) services. If this icon is absent, your phone is
operating in analog mode.
Vibrate mode: This icon indicates that an incoming call will make
the phone vibrate rather than ring. This feature can be used for
situations where your ringer will not disturb others, or for “loud”
situations where you will be unable to hear the ringer.
Battery strength: This icon is always displayed when your phone is
active, it displays your battery charge level. The more black bars you
see, the greater the charge. When the battery becomes very low, a
flashing empty battery icon displays and the phone sounds an audible
alert; this indicates that your phone is about to turn itself off.
36
Other phone icons
Duplicate: This icon indicates that a duplicate message was sent.
E-mail: This icon represents an e-mail address.
Fax: This icon represents a fax number.
Filed Message: This icon displays if a message has been filed.
Home: This icon indicates represents an individual’s home number.
Message: Icon displays when outgoing messages are transmitted.
Message read: This icon displays when you have read a message.
Message received: This icon indicates that an incoming text,
voicemail, page or browser message has been received.
Mobile: This icon represents a mobile phone number.
Multi: This icon displays if multi messages are successfully delivered.
No label: This icon indicates that no label exists for this entry.
Office: This icon represents an office number.
Pager: This icon represents a pager number.
Send Delivered: This icon displays if a sent message is delivered.
Send Failed: This icon displays if a message failed to be sent.
Speed dial: This icon displays when the number you wish to call is
available using the speed dial feature.
Voice privacy: This icon indicates that voice privacy is enabled.
Voice privacy: If an area supports voice privacy this icon displays.
Urgent: This icon displays if a message is urgent.
37
Using the battery
Note: Your phone comes packaged with a partially charged, rechargeable standard
Li-Ion battery. The phone can be used while the battery is charging, but must be fully
charged the first time you use your phone otherwise the battery could be damaged.
Installing the battery
The battery attaches to the phone very easily:
1. Gently place the top end of the battery (The top end of the battery
displays the word Samsung in raised letters), into the provided slots on
the underside of the phone (place about half an inch away from the
button in order to connect with the slots properly.)
2. Press the battery down and slide it toward the top of the phone until you
hear it click into place.
Removing the battery
To remove the battery from your phone:
1. Turn the phone off (by pressing and holding
animation begins.)
until the closing
2. On the back side of the phone, hold the button down and push the
battery toward the bottom edge of the phone (see illustration). The
battery will then lift or fall away from the phone.)
38
Charging the battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved adaptors and batteries. These adaptors are designed to
maximize battery life. Using other adaptors will invalidate your warranty and
may cause damage.
When the phone has finished charging it can be disconnected.
Low battery indicator
You can tell whether or not your battery needs to be recharged by checking the
battery indicator (this icon
is located in the upper-right corner of the
display screen). The presence of all three bars indicate a full charge. No bars
(the battery icon is empty) means your battery must be charged.
The empty battery icon
Two to 3 minutes before the battery charge level gets too low to operate the
phone, the battery sensor will let you know by blinking an empty battery icon
(
), and sounding a tone. If you continue to operate the phone without
charging the battery, the phone will automatically turn off. If this happens, your
wireless call will be terminated. However, if you plug into a charging device,
you can continue your call. Be sure to monitor the battery strength icon and
make certain your battery is adequately charged.
39
Caring for the battery
Protecting your battery
The guidelines listed below help you get the most out of your battery’s
performance.
•
Use only Samsung-approved batteries and adaptors. These adaptors are
designed to maximize battery life. Using other batteries or adaptors voids
your warranty and may cause damage.
•
•
In order to avoid damage, charge the battery only in temperatures that
range from 32º F to 113º F (0º C to 45º C).
Don’t use the battery adaptor in direct sunlight or in high humidity areas,
such as the bathroom.
•
•
•
•
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long period
of time.
•
•
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
Less than one month: 4º F to 140º F (-20º C to 60º C)
More than one month: 4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (Li-Ion)
batteries
For safe disposal options of your Li-Ion batteries, contact your nearest
Samsung Authorized Service Center.
Note: Be sure to dispose of your battery properly. In some areas, the disposal of
batteries in household or business trash may be prohibited.
40
Using the travel adaptor
The travel adaptor allows you to charge your phone’s battery from any 110 volt
AC standard wall outlet. Also, using the travel adaptor allows you to make a
phone call while the battery is charging. The travel adaptor will fully charge an
“empty” standard battery in approximately 4 hours, and an “empty” extended
battery in about 6 hours.
Follow these steps:
1. With the battery in position in the phone, attach the cord from the travel
adaptor by plugging it into the adaptor outlet at the bottom of the phone.
2. Connect the adaptor to a standard 110 volt AC wall outlet. The phone will
automatically power on. The battery will begin charging immediately, and
the LED will light and remain red while the battery icon animates, the
icon will remain animated, even if the phone is turned off during
charging.
3. The LED on the phone indicates the status of the battery being charged.
•Red (solid) indicates that the battery is charging.
•Green (solid) indicates that the battery is fully charged.
•Orange (solid) indicates (1) the battery is not seated correctly in
the phone, (2) the adaptor is not plugged in correctly, or (3) the
battery is inoperable. Please check the adaptor and/or battery.
4. Make a phone call at your convenience when the phone is plugged into
the travel adaptor. The adaptor will continue to charge the battery even
when you are making the call!
Note: The battery charges faster when the phone is turned off.
41
Calls
Outgoing
To place a call press
to power on your phone. The phone first shows an
animated sequence and the icons discussed earlier display, this indicates your
phone is on. (No dial tone will be heard). This is called standby mode.
1. Enter the phone number you wish to call (up to 32 digits), by pressing
the numeric keys. The phone numbers display from left to right.
2. Press
to place a call to the entered phone number.
•
A record of the last 10 calls made is stored to the “Outgoing” call log list.
Incoming
Your phone signals an incoming call or message in the following ways:
•
•
•
The backlight illuminates.
The red LED indicator flashes.
The ringer sounds (unless you have set the ringer to vibrate or off.)
Incoming call notification continues until one of the following events occurs:
•
•
•
You answer the call.
The calling party ends the call.
The call is sent to voicemail.
Your phone provides the following voice call notification features.
•
•
•
Eleven ring volume settings including vibrate or off.
Five ring types, and fifteen melody tones (see “Ringer type” on page 75).
Name display with Caller ID. (If the caller’s name is programmed into
your Phone Book.)
•
Automatic storage of an incoming call’s information to a call log. (The
last 10 calls you answered are stored in an “Incoming” call log list and
the last 10 calls you missed are stored in a “Missed” call log list).
42
Missed
Your phone keeps a list of calls that you did not answer when the phone was
active and service available. The phone indicates a missed call by displaying a
text notification on the screen. Additionally, if caller information is available, a
Missed call entry is created, and the screen displays the phone number of the
most recent missed call.
Your phone has two convenient options for when you have missed a call:
•
Press
to call the displayed number. (To view a call log of your
missed calls, see “Reviewing outgoing, incoming, or missed calls” on
page 38.)
•
Press
to clear the “Missed Call” message from the display.
Erase logs
You can erase any one of the three call directories (Outgoing, Incoming or
Missed), or you can erase all three directories together. To erase all
directories:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Calls menu.
for Erase Logs. The available options are Outgoing,
Incoming, Missed and All.
4. Toggle
5. Press
6. Press
up or down between these options.
to erase all your call directories.
to cancel the action and return to the previous menu.
43
Reviewing outgoing, incoming, or missed calls
When a call log is displayed, press the number associated with the call log to
be connected.
1. In standby mode, press
2. Press
•Press the number associated with the call log to select an option:
to display the main menu.
for Calls.
•Press
•Press
•Press
for Outgoing calls.
for Incoming calls.
for Missed calls.
3. When that call log option displays, toggle
up or down to locate
the call information you require. If there is a Phone Book match, the
name displays. If there is no Phone Book match, only the phone number
will display.
4. When an individual call log is highlighted:
• Press
• Press
to be connected to that party.
to review all the available call information (name and
phone number [if available] and time/date stamp.)
• Press
for further options (Talk to call the number, Save to
store the number to your Phone Book, or Prepend to prepend
the number).
5. Press
to exit the call log, and return to the previous screen.
44
Keeping track of call activity
Your phone saves a record of calling activity that permits you to easily return
calls.
Your phone retains these three call directories in memory:
•
•
•
Outgoing: The last 10 calls placed from your phone.
Incoming: The last 10 calls placed to your phone.
Missed: The last 10 calls placed to your phone that you did not answer.
Each entry, or call log contains the name and/or (if available), phone number
and a time/date stamp.
In addition to the Incoming, Outgoing, and Missed call directories, your phone
maintains an air time log. For further information see “Air time” on page 40.
Viewing call logs during a conversation
1. Press
2. Press
3. Toggle
to display the In-Use menu.
for Calls.
to highlight an option. The available options are
Outgoing, Incoming and Missed.
4. Press
to open the log of choice, or press
to cancel, and
return to the previous screen.
Three way calling
To place a three way call:
1. Call the first party, and press
remain on the line, press
. When connected, ask them to
and they will be placed on hold.
2. Call the second phone number, and press
.
3. When the second party answers, press
connected.
and all parties will be
Note: If you have questions regarding the billing of three way calls please contact your
service carrier. It is usual for you to be billed for both calls.
45
Air time
Your phone records (or logs), the amount of air time or talk time used for all
calls.
You can view this time from standby mode:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
for Calls.
for Air Time.
to highlight an option. The available options are:
Last Call, Total, LifeTime and Erase Total.
5. Press
to open an option, or press
to cancel, and return to
the previous screen.
Last call
Last call allows you to review the amount of time spent on the last call you
made.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for Last Call. The amount of time spent on your last call
displays.
5. Press
to return to the previous display screen.
46
Total
Total air time is the cumulative amount of time the phone has been used since
the total air time was last erased. Air time for all incoming and outgoing calls is
saved here. This feature is not intended for billing purposes.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for Total.
The screen displays the total number of calls and the total air time for
calls made and received since you last set the Total air time to zero (by
using the “Erase Total” option.)
5. Press
to return to the previous display screen.
LifeTime
LifeTime air time is the amount of time the phone has been used since it was
first activated. Air time for all incoming and outgoing calls is saved here. This
feature is not intended for billing purposes.
Note: You cannot erase any information created by this option.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for LifeTime.
The screen displays the total number of calls made from this phone, and
the total amount of air time used since this phone was set-up. This
information cannot be erased.
5. Press
to return to the previous display screen.
47
Erase total
If you choose the Erase Total option, the counter for all air times with the
exception of LifeTime, will be set to “zero”. The counter will begin counting the
next time you make or receive a call.
To erase your total air time.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Calls.
for Air Time.
for Erase Total. Toggle to highlight Yes or No.
5. With Yes highlighted, press
to standby mode, or press
to erase the total airtime and return
to cancel the operation and return to
the previous display screen.
48
Phone Book
Your phone permits you to store up to 100 numbers and names in the Phone
Book. Each entry can have up to 7 associated phone numbers and one e-mail
address. Each entry can contain up to 32 digits including hard pauses, with an
associated name of up to 12 characters. (Name entry is optional) Stored phone
numbers can be placed into one of seven categories - Speed dial, Home, Office,
Mobile, Pager, Fax and No label. You can even specify the memory location of
your choice for each entry. Memory locations can be marked “Secret”
preventing the unauthorized from viewing the telephone number.
One-Touch and Two-Touch Dialing from your Phone Book makes it easy to
call a phone number stored in your Phone Book. See “Shortcuts to memory
dialing” on page 60.
Setting auto answer
With this option activated, your phone will automatically answer calls after the
specified number of seconds. This options is useful when driving.
If Auto Answer is set to ‘Off’ the phone will not answer an incoming call. If you
do not answer the call it is automatically stored in the Missed Call log.
To enable Auto Answer.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
for Setup.
for Auto Answer. The Auto Answer screen displays.
to highlight an option. The available options are:
off, after 1 sec, after 3 sec, or after 5 sec.
5. Press
to save.
6. Pressing
returns you to the previous screen.
49
Add entry
Adding a phone number
This menu allows you to add a phone number to your Phone Book, but as the
exercise progresses you will learn how to add further entries including a
Name, Category, Relation and Ringtype, together with the ability to generate an
entry location number, and make a number secret.
Here are a list of the Phone Book options:
•
•
•
Number: Telephone number.
Name: Name associated to a telephone number.
Entry: The memory location number which is allocated to the name in
the list of names and numbers that you created.
•
•
Secret: This field allows you to designate a number “secret”.
Category: A “category” label is associated with each phone number. For
example: Speed Dial, Home, Mobile, Office, Pager, Fax, and No
Label.
•
•
Relation: A “relationship” label is associated with a group associated
to a number. For example: No Group, Friend, Family, Colleague and
VIP.
Ringtype: This field allows you to set a distinctive ring type for the entry.
With the phone in standby mode:
1. Press
2. Press
3. Press
for the main menu.
for Phone Book.
for Add Entry. The Phone Book display screen prompts
New Entry?.
4. Press
. The prompt changes to Add Entry. Enter the phone
number. (Up to 32 digits can be entered.) For pause options press
. For further details on pause calling, see “Adding pauses” on
page 52.
50
5. Press
to save the entry. The Phone Book (Information) screen
displays with the newly added number highlighted in the Number field.
The Name field remains empty while the Entry, Secret, Category,
Relation and Ring Type fields contain generated information. The
Entry field contains a newly generated location number. Information for
other field’s will change as you continue.
Adding a name
To add a name to the Phone Book:
1. At the Phone Book (information) screen, toggle
to highlight
Name.
2. Press
3. Press
, the Enter name screen displays. Enter a name.
to save and display the information in the Name field on
the Phone Book (information) screen.
Note: Press and hold
to toggle between text entry modes and numeric icons,
making it easier to enter information in the correct format.
Adding a relation label
To add a “relationship” label associated with a group, which is associated with
a number in the Phone Book.
1. At the Phone Book (information) screen, toggle
to highlight
Relation.
2. Press
, the Relation menu screen displays. The options No
Group, Friend, Family, Colleague and VIP display.
3. Highlight an option and press
to save and display the information
in the Relation field on the Phone Book (information) screen.
51
Adding and changing a ring type
To set a distinctive ring type to a Phone Book entry:
1. At the Phone Book (information) screen toggle
to highlight
RingType.
2. Press
, the RingType screen displays. Toggle to highlight an
option. The options show: Inactive, 5 monotone ringers, and 15
melodies.
3. Press
to save and display the information in the RingType field
on the Phone Book (Information) screen.
Overwriting a category
The Category field is automatically filled and designated Speed dial when an
Entry number is generated by the phone. You may wish to change this phone
generated Category label to one of the following: Home, Mobile, Office, Pager,
Fax, or No label, with Speed Dial remaining the default option.
1. At the Phone Book (information) screen, toggle
to highlight
Category.
2. Press
, the Category screen displays. The options Speed dial,
Home, Mobile, Office, Pager, Fax, and No label, display.
to save and display the new Category label on the Phone
Book (information) screen.
3. Press
52
Overwriting existing name and number
information
It is possible, using the same techniques to automatically overwrite existing
information using separate actions in both the name and number fields. Follow
these instructions:
1. At the Phone Book (information) screen, press the toggle
repeatedly to locate and highlight an existing name or number field that
needs the information changed. When highlighted, press
2. The name or number will be displayed. To overwrite, hold down
until you clear the existing name or number. Enter new information and
press to save. The new information will be displayed.
arrow
.
,
Setting secret
This feature allows you to keep certain numbers in your Phone Book
confidential so that others cannot access them.
1. From the Phone Book (information) screen,
toggle to highlight
Secret.
2. Press
3. Press
. Toggle to highlight the On (secret) or Off (cancel) option.
to save.
Note: All Phone Book entries can be made secret. If you access the entry later, you will
be prompted to enter your 4-digit user lock code.
53
Find name
This option allows you to find a stored name (alphabetically) in the Phone
Book and place a call to that name.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
for Find Name. (For quicker access to the entry can also
press the key associated with the first character of the name you wish to
find.)
4. Toggle
5. Press
to highlight the name.
to select the name. The display screen shows the phone
number and E-mail address (if available) associated with the name.
6. Press to place the call.
With an entry selected, press
to access any of the following options:
calls the number.
•
•
•
Talk: Pressing
or
Add #: Permits the adding of a phone number.
Edit: Permits editing of the phone number, name, entry number,
category, secret number, relation and ring type.
Prepend: Allows you to prepend a number to either a feature code or
area code before calling.
•
•
•
Erase: Erases the number.
Name Ring: Permits you to select a unique tone to identify an incoming
caller.
•
E-mail addr: Permits you to add an E-mail address.
7. Pressing
returns you to the previous screen.
54
Find entry
This option allows you to find a stored entry by location number.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
5. Press
6. Toggle
7. Press
for the Phone Book.
for Find Entry.
to highlight a specific entry.
to select the entry. The entry information is displayed.
to highlight the phone number.
to call the number.
Note: If no name is associated with the number, the Name Label shows No Name
Relation search
This option allows you to find a stored entry in a related group.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
for the Phone Book.
for RelationSrch.
left or right to review the Relation groups displayed at the
bottom of the screen and see associated names mid screen.
5. Toggle
down to highlight a specific entry.
6. Press
to select the entry from the group. The entry information is
displayed, with the phone number highlighted.
Note: If the phone number is designated “secret” the number will not be displayed on
the standby screen when called.
7. Press
to call the number, or press
to return to the
previous display screen
55
Adding an e-mail address
Use this method to add a new e-mail address to an entry in the Phone Book.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
highlighted words New Entry?
4. Press
.
5. The E-mail Addr blank screen displays together with MENU:Options.
Note: Choosing MENU:Options allows you to select from entry modes: T9 Word ,
ABC, Symbol and 123. For further information on these entry modes see “Entering
text, numbers, and/or symbols” on page 101.
6. Begin entering the e-mail address using the keypad. You can enter up to
48 characters. After entering the e-mail address.
7. Press
to save. The Phone Book (information) screen displays
the newly entered e-mail address.
Note: To continue to complete the Name, Entry, Secret, Category, Relation, and Ring
Type fields, information is available on adding a name see “Adding a name” on page 45,
adding an entry see “Add entry” on page 44, Secret numbers see “Editing phone book
numbers” on page 54, for Relation see “Adding a relation label” on page 45, “Adding
and changing a ring type” on page 46, or “Storing emergency numbers” on page 118.
Categories may be selected using the MENU:Options prompt.
56
Editing an existing e-mail address
Use this method to edit an existing e-mail address.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
5. Press
for Phone Book.
for Find Entry. The Phone Book displays.
to highlight the entry and press
.
, and select the Edit option. The Phone Book (information)
screen displays. Edit the existing E-mail address using the methods
described under “Adding an e-mail address” on page 50
6. Press
to save.
Adding an e-mail address to an existing
phone book entry
You can add an E-mail address to an existing entry in the Phone Book, your
phone can then send a message via the network service provider to the e-mail
address.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Phone Book.
for Add E-mail. The Phone Book (information) screen
displays with the entries found under Find Entry.
4. Toggle
5. Press
6. Press
to highlight the name requiring the E-mail address.
to open. The E-mail addr entry screen displays.
for the options menu and select from entry modes For
further information see “Adding an e-mail address” on page 50.
7. Enter the E-mail address. You can enter up to 48 characters.
8. Press
to save. The Phone Book (information) screen displays
showing the newly added E-mail address.
57
Adding pauses
When you call automated systems (like banking services), you are often
required to enter a password or account number. Instead of manually entering
the numbers each time, you can store the numbers in your Phone Book
separated by special characters called pauses.
•
•
Hard pause: A hard pause stops the calling sequence.
Two second pause: A 2 second pause stops the calling sequence for 2
seconds and then automatically sends the remaining digits.
•
Hyphen: Places a hyphen between characters.
Your phone has 3 pause calling methods: pause calling from the Phone Book
(see “Manual pause calling” on page 53), and manual pause calling (see
“Manual pause calling” on page 53).
Note: Multiple 2 second pauses can be entered to extend the length of a pause. For
example, 2 consecutive 2 second pauses cause a total pause time of 4 seconds. However,
keep in mind that pauses count as digits towards the 32 digit calling maximum.
Storing pauses in a phone book entry
To store a number in your Phone Book that contains pauses.
1. Enter the phone number you want to store (such as the bank’s
teleservice phone number).
2. Press
. The pause menu options display.
3. Toggle
to highlight one of the three pause menu options offered.
4. Press
using
to select an option. Continue entering the number and
to enter pauses.
•“P” Hard Pause: The letter “P” displays within the number,
meaning that a hard pause will occur at that point in the calling
sequence. Enter the digits that need to follow the pause (such as
your account number).
58
•“T” pause: The letter “T” displays in the number, meaning that a
“Timed” (2 second) pause will occur at that point in the calling
sequence. Enter the digits that need to follow the pause (such as
your account number).
•Hyphen: Places a hyphen between characters.
5. When the number and pauses are complete, press
to store the
number in your Phone Book.
Pause dialing from a stored entry
To pause dial from the Phone Book:
1. If you stored the number using (2 second) “T” pause(s) , simply call the
number from the Phone Book.
2. If you stored the number using (hard) “P” pause(s), call the number
from the Phone Book and wait for the appropriate prompt from the
number you are calling (credit card number, bank account number,
etc.). When prompted, press
to send the DTMF number that
follows your hard pause. “SENDING DTMF” flashes on the screen (the
transmitted tones are audible).
Manual pause calling
To manually call a number with pause(s) without storing to the Phone Book.
For pause information see “Storing pauses in a phone book entry” on page 52.
1. Enter the phone number of the service you want to call (such as a bank’s
teleservice phone number). For example, your bank’s teleservice phone
number might be an 800 number. Begin by entering the number 1.
2. Press
to locate the pause option of choice and press
Continue in this manner until the complete number with pause(s) has
been entered. Now press to call the number.
to display the pause Menu options. Use the toggle
to activate.
Note: Storing pauses is convenient if you plan to call the number frequently.
59
Accessing your phone book during a
conversation
To access your phone book during a conversation:
1. Press
2. Press
to display the In-Use menu.
for Phone Book.
3. Use your keypad to enter the number associated with the Phone Book
menu option to locate the information required.
Editing phone book numbers
Once stored in the Phone Book, an entry can be changed quite easily.
To change a Phone Book entry:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
5. Press
6. Press
7. Press
for Phone Book.
for Find Entry. The Phone Book displays.
to highlight the entry requiring editing.
. The existing phone number is highlighted
, and toggle to highlight the Edit option.
. The Phone Book (information) screen displays.
Note: If the number has been designated as “ Secret” you are prompted to enter your
4-digit Lock Code. Once entered, toggle
press . Toggle to highlight Off and press
(information) screen now displays Secret: Off.
to locate the Secret option, and
. The Phone Book
8. Press
.
9. Press
until the existing number is deleted. Enter the new number.
if you need the pause
(You can enter up to 32 digits.) (Press
menu.) Use the keypad to enter the phone number. The number displays
from left to right.
10. Press
60
to save the new number to the Phone Book.
Prepending a phone number
The Prepend option permits you to add prefix numbers such as area codes and
network feature activation codes to phone numbers that are already stored in
your Phone Book or call log.
To Prepend a stored phone number:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Phone Book.
for Find Name, or
for Find Entry. Find Name
searches the Phone Book entries alphabetically, and Find Entry
searches the Phone Book entries numerically.
4. Find the number you want to “Prepend” by using one of the search
methods described in “Setting auto answer” on page 43, and then press
to save.
5. Press
to display Menu options.
arrows to locate the Prepend option.
. The screen displays “Prepending”.
6. Use the toggle
7. Press
8. Use the keypad to prepend the number (which cannot be longer than 10
digits.)
9. Press
to place the call.
Erasing individual phone book entries
To erase an existing entry from either the Find Name or Find Entry option.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
for Phone Book.
for Find Name or
for Find Entry.
to highlight the information and press
.
61
5. Press
to display the menu options which are:
Talk, Add #, Edit, Prepend, Erase, Name Ring, and E-mail addr.
6. Toggle
to highlight the Erase option. Press
. The phone
prompts Yes or No. Toggle
to your option of choice.
7. Press
press
to confirm (Yes) and erase the Phone Book entry, or
to cancel (No) the Erase command and return to the
Phone Book.
Erasing your phone book
You can erase all the numbers stored in your Phone Book. This is useful if you
want to give your phone to a friend or family member, or if you need to erase
all of your phone numbers.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security. Enter your current 4-digit lock code.
for Clear MEM. A confirmation message displays asking if
you still want to “Proceed”.
4. Press
to continue and erase the Phone Book entirely, or press
to cancel the operation. The message “Erasing Phone Book
and Voice Dial” displays while the operation is under way. The phone
then returns to standby mode.
62
Adding a name ringer to your phone
book entry
You can associate one of 20 different ringers (fifteen melodies and five
monotones) to numbers stored in your Phone Book. When you receive an
incoming call from a number matching an entry in your Phone Book your
phone will play the associated ringer to announce the call.
Note: If the Caller ID information is unavailable for an incoming call then the Name
Ringer option will also be unavailable.
1. In standby mode, press
to display the main menu.
2. Press for Phone Book. (Find the entry to which you wish to add
a Name Ringer, using one of the search methods described under “Find
name” on page 48, or “Find entry” on page 49.)
3. Toggle
to highlight the entry to which you wish to add a Name
Ringer.
4. Press
.
.
5. Press
6. Toggle
7. Press
8. Toggle
9. Press
to highlight Name Ring.
. Your phone displays the current Name Ringer setting.
to listen to other available ringers and melodies.
to save your selection.
63
Setting speed dial
For each name entered in the Phone Book, the option of designating a Speed
Dial number is available.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Toggle
5. Press
6. Press
7. Toggle
8. Press
9. Toggle
10. Press
11. Toggle
for Phone Book.
for the Find Name, or
for Find Entry .
to highlight the entry you wish to designate.
to display that entry’s phone number.
for options.
to highlight the Edit option.
. The Phone Book (information) screen displays.
to highlight Category.
for options.
to highlight Speed dial, and press
. The Phone
Book screen displays with the wording Entry: 000 highlighted.
12. Use the keypad to enter the associated Speed dial number.
13. Press
name or entry an “Overwrite?” prompt will be displayed. Use the
toggle arrows to choose “Yes” or “No”, press to
to cancel and return to
. If you have previously set a speed dial number for this
continue, following the prompts, or press
the previous screen.
64
Storing incoming phone numbers at the
end of a call
To store a phone number after ending a call:
Note: If the call was incoming, and Caller ID information was unavailable, then the store
option will also be unavailable.
1. Once you have pressed
to end your call, the screen displays the
call time (length of call), phone number and name of the party (if
available).
2. Press
for main menu.
for Calls.
3. Press
4. Press
5. Press
6. Press
7. Press
for Incoming.
.
for menu options, toggle to highlight Save.
to store the phone number to the Phone Book.
Storing phone numbers from call logs
Use this method to store a phone number from the call logs.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Calls.
for Outgoing, or
for Incoming call activity.
4. Highlight the number that you wish to store to the Phone Book and
press
5. Press
6. Press
.
for menu options, toggle to highlight Save.
to store the phone number to the Phone Book.
Note: The number can be stored to the Phone Book as a new entry, or for further details
regarding updating an existing entry see “Editing phone book numbers” on page 54.
65
Shortcuts to storing phone numbers
You can store a phone number by entering the number, and pressing
.
Follow the screen prompts to designate other information. You can also save a
number after an incoming or outgoing call. For further information see
“Storing phone numbers from call logs” on page 59
Calling numbers from the phone book
Calling numbers from your Phone Book is simple. Different methods are
explained below:
One-touch dialing
Memory locations 001 through 009 are special One-Touch locations. You can
call the phone numbers stored in the Phone Book memory from 001 through
009 by pressing one key. For example, for location number 001. Press and
hold
until the name and number are displayed and called.
Two-touch dialing
Memory locations 010 through 099 are special Two-Touch locations. For
example, for location number 013, press
and hold down
until
the name and number are displayed and called. To dial the number 100,
Three Touch dialing is required.
Shortcuts to memory dialing
Speed Dialing:
From standby mode, enter the entry’s Speed
Dial number, and press
to call .
for main
Toggling to the #:
From standby mode, press
menu, press
for Find Entry. Toggle to highlight the
entry, press to call that entry’s Speed
Dial number.
for Phone Book, press
66
Web/Minibrowser
Your phone comes equipped with Wireless Web Internet access through a
MiniBrowser. The MiniBrowser displays immediate information through your
phone. You can view specially designed versions of popular sites which include
sports, weather, news, stock quotes, etc. Browsing the Web through your
phone is not the same as using your PC since site providers have only selected
certain aspects of the available sites to present to the wireless phone users and
have removed most graphics.
Each time you launch the MiniBrowser, the phone will connect to the Internet
and the service indicator icon will display. Any time the service indicator icon
is visible on the display, you are connected to the Internet and will be invoiced
accordingly. Rates and pricing vary according to your service option. For
further information contact your service provider.
The MiniBrowser will end an Internet connection after a certain period of
inactivity, however some information from your session remains stored in the
phone, and (if you leave your phone turned on) you can access this
information without reconnecting to the Internet. If you are viewing this stored
information, and you select a link to a site that was not accessed in your last
session, then you will automatically be re-connected to the Internet. For this
reason, you may find that you are billed for several network connections within
a single session. This is normal and is designed to minimize your bill.
Note: The phone must be in a digital network to use the MiniBrowser. When you are in a
digital network, the
icon is displayed.
A shortcut to launching the Web
Once you have registered with your carrier, you can quickly use this shortcut to
access the Minibrowser.
•
In standby mode, press the right toggle
press
arrow, then
.
67
Launching the minibrowser
Note: The first time you use the MiniBrowser, you will be prompted to go through a
security setup process that takes approximately three to five minutes.
Note: When the security key is initially sent to the carrier, a unique value is created. If
the phone is reset for any reason, you must contact the carrier to reset the security key.
The original key is no longer valid and will not allow the MiniBrowser to operate.
To launch the MiniBrowser.
1. In standby mode, toggle
2. Press
right, or press
.
for Launch Web. The prompt states “Charges will
apply. Start MiniBrowser?” Press the left toggle arrow. Your phone
will begin its search to launch the MiniBrowser.
Note: A reminder of the charge incurred may appear (depending on your prompt setting
- see “The minibrowser start and end prompts” on page 63). To dismiss the prompt,
simply choose yes or no. If no prompt is displayed, you are immediately connected to the
internet.
3. Once connected, the Home Page (or the last page visited), will be
displayed. To access the Home Page from any other menu in the
MiniBrowser, press and hold
.
An example of a Home Page is shown below:
WIRELESS WEB
HOME PAGE
1. Financial
2. Traffic
3. Travel
4. Weather
5. Sports
6. Entertainment
7. Games
8. Shopping
9. Portals
Note: What appears in the display window is dependent upon the service provider
content. To view additional text, use the toggle
.
68
Exiting the web/minibrowser
Press
or close the phone’s flip cover to exit the Web.
If the “Prompt to end” or “Prompt both” option is selected in the
MiniBrowser setup (
), a prompt asking if you want to
end the MiniBrowser call is displayed.
The minibrowser start and end prompts
Your phone can be set to view a prompt each time you start or end a
MiniBrowser session. You have the option to change this default prompt
setting. The default setting may differ as it is based upon the carrier’s
requirement. To change the settings:
1. In standby mode, use your thumb on the toggle’s right arrow, or press
to display the main menu, and press
for Web.
2. Press
for Prompt.
3. Toggle
to highlight one of the four options:
•None: This prompt is never displayed.
•To Start: You will see this prompt when you enter the browser, but
not when you exit it.
•To End: You will see this prompt only when you exit the browser.
•Both: You will be prompted when you enter or exit the browser.
4. Press
to save your setting or press
to cancel.
The minibrowser soft keys
At the bottom of the MiniBrowser display is a solid bar which contains the
browser commands. The “soft” keys (
) appear below
the solid bar and are used to execute the commands. These two keys are called
“soft” keys because their function changes depending on where you are in the
MiniBrowser software.
69
Navigating the web
When you use the MiniBrowser, some of the keys on your keypad will operate
differently than during a normal phone call. These keys are explained in “How
the minibrowser works” on page 64.
The MiniBrowser presents on-screen items in any of the following ways:
•
•
•
•
Text or numeric input.
Links (embedded in content).
Numbered options (some options may not be numbered)
Simple text
You can act on the options or links by using the soft keys.
How the minibrowser works
Toggle: Use the up/down toggle arrows to find
and select from all MiniBrowser options. The
selected option is indicated by an arrow. Also use
the toggle to move the cursor when editing text.
The right/left toggle arrows are soft keys. The
left soft key is used as “OK” or “Retry”. The
right soft key is used to access secondary
options, or a menu of secondary options such as
“Cancel” or “Done”.
OK / message: This key is used primarily for
selecting the highlighted item.
70
C (CLR): This key performs two
functions:
•
It is used as a browser back-up key.
Pressing it once backs you up one page.
Pressing and holding it down backs you up
to the carrier’s Home Page.
•
It also clears entered text or numbers.
When entering numbers or text, press it to
clear the last number, letter, or symbol.
Press and hold it down to completely clear
the input field.
Asterisk / Shift: Press this key before entering
text to create upper case characters. You can also
use this key to move back one space on the
display screen.
0 / Next: Press this key to enter a 0, or to move
to the next word when in T9 predictive word entry
mode.
Pound / Space: Press this key to insert a space
when entering text.
Numbers 1 - 9: If items on a menu are
numbered, these keys can be used to select them.
END: Press this key to exit the MiniBrowser and
return the phone to standby mode.
MENU: This key can be used to enter the
MiniBrowser menu at any time.
SEND: This key can be used to send a call.
71
Using links
Links have several purposes, including jumping to a different page, jumping to
a different site or even initiating a phone call from some sites. Links are shown
inside of brackets ( [ ] ), and you can normally use the left soft key to select a
link when it is highlighted.
Making a phone call while using the
minibrowser
You may initiate a phone call from the MiniBrowser if the site you are using
supports this feature (the phone number may be highlighted and the left soft
key will appear as “Call”). Pressing the “Call” soft key will call the number. In
most cases you can also use
to call the number. The Internet
connection will be terminated when you initiate the call. After you end the call,
your phone will return to standby mode.
72
Scheduler
Information features
Information features allow you to add events in a calendar format that can be
viewed, and if so required alert you to these same events.
How to access information features
1. In standby mode, press
to display the main menu.
2. Press
for Scheduler.
3. Toggle
to highlight an option. The available options are:
Today, View Month, Jump To Date, To Do List, Count Down,
World Time, Calculator and Alarm.
4. Press
to open that option.
Scheduler
Scheduler functions allow you to schedule personal events and view them in an
easily read format.
Today
You can schedule up to 9 events for the current day by indicating each event’s
start and end time. You can be alerted by an alarm before an event is to
commence. Events that are scheduled for future dates automatically appear on
your Today events schedule on that particular day.
73
How to schedule an event
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Scheduler.
for Today, the New Event screen displays. (Pressing
will offer further options. For example: T9 Word, ABC, Symbol
and 123. Toggle
to highlight an option, and press
to
select that option.)Note:Press and hold
to toggle between text entry
modes and numeric icons, making it easier to enter information in the correct
format.
4. Enter the event. (Up to 32 characters can be entered.)
5. Press
to continue. The Time/Date screen displays. Add the start
time and date using the keypad.
6. Press
to display the next screen. Add the end time and date. After
the correct information has been entered
7. Press
, an alarm screen is displayed. Toggle to highlight an alarm
to notify you of your event. The options are: No alarm, On time, 10Min
before, 30Min before, 1Hour before.
8. Use the toggle to locate the option and press
to save. The phone
prompts that the information is “Stored”.
How to add, edit, or erase an event
1. In standby mode, press
for the menu and Scheduler.
Press
for Today.
2. Press
for the following options:
•Add New: Allows you to add an event.
•Edit: Allows you to edit an event.
•Erase: Allows you to erase an event.
3. Press
to select the option of choice, and complete the exercise by
following the prompts.
74
View month
View Month allows you to view in calendar format the current month, a past
month or a future month. In View Month, the current date is highlighted on the
calendar. Days with scheduled events are underlined.
How to view an event
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Scheduler.
for View Month, a current calendar screen displays. (The
current date is highlighted, but you can use the toggle to select a new
date and month. (If more than one event is scheduled, use the toggle to
display them.)
4. Pressing
at a selected date, offers the following options:
•View: Permits you to view the previous entries for that date.
•Add New: Permits you to add a new entry for that date.
5. Toggle to highlight Add New. Select
to enter the option. The
New Event screen displays. Complete the exercise by following steps 4
through 9 as indicated in “How to schedule an event” on page 68.
Jump to date
Jump To Date allows you to specify the calendar date you want to view. Arriving
at the desired date, you can enter, edit, and/or erase events in your calendar.
Using jump to date
1. In standby mode, press
Press for Jump To Date. Complete the exercise by using steps 4
through 9 as indicated in “How to schedule an event” on page 68.
for the menu and Scheduler.
To do list
The To Do List allows you to compile a list of items to be completed. Your
phone can store, prioritize and manage twenty To Do List items.
75
Creating a to do list item
1. In standby mode, press
for the menu and Scheduler.
Press
for To Do List. An Add To Do screen displays. Complete
the exercise by using steps 4 through 9 as indicated in “How to schedule
an event” on page 68. You can choose the toggle to set the priority for a
To Do List item. Your choices are High and Low.
How to view, edit, add or erase a
to do list item
1. In standby mode, press
for the menu and Scheduler.
Press
for To Do List. Toggle
to locate the event you wish
to change.
2. Press
. Your options are: Add new, Edit, and Erase. Complete
the exercise by following the prompts.
Count down
Count Down allows you to find out how much time will elapse between the time
entered and a scheduled event. You can create up to twenty Countdown timers.
•
•
The keys
Countdowns can be entered for dates between the years 1980 and 2099.
for the menu and Scheduler.
for Count Down. The screen prompts for a new Count
and
are equal to A.M. and P.M.
1. In standby mode, press
Press
Down. Enter a name for your new Count Down timer. Press
to
complete.
2. Enter the date and time you want to “Count Down” to. For example: if
today’s date is April 1, 2001 and you wish to know how many months,
days, and hours remain before 7:00 P.M. February 14th 2002, enter the
time 07:00 P.M. and the date 02/14/2002.
3. Press
to store the Count Down timer.
76
How to view, edit, add or erase a
count down timer
1. In standby mode, press
for the menu and Scheduler.
Press
for Count Down. Countdown timers display in order of the
least amount of time passed since the countdown commenced, and least
amount of time remaining until the specified date.
2. Press
Erase. Press
to open the options. Your choices are: Add New, Edit, and
to select the option. Use the toggle to find the item
you wish to change and follow the prompts. You can press
time to exit the exercise.
at any
World time
Informs you of the time of day, or night in another part of the world. World
Time displays the time in 24 different time zones around the world, in one or
more major cities, states, regions or countries. It should be noted that World
Time does not support Daylight Savings Time for countries other than the USA.
Checking current time world wide
1. In standby mode, press
for the menu and Scheduler.
Press for World Time. The screen displays a world map. The
city, country, time and date are indicated by a longitude indicator. You
can toggle up/down, left/right to reach the city and time you need.
• Alaska
• San Francisco
• New York
• Denver, Arizona
• Caracas
• Chicago, Mexico
• Buenos Aires
• London
• Mid Atlantic
• Paris, Berlin
• Abu Dhabi
• Cape Verde
• Athens, Helsinki
• Tashkent
• Moscow
• Alma-ata
• Seoul, Tokyo
• Wellington
• Bangkok, Jakarta
• Guam, Sydney
• Samoa, Midway
• Hongkong, Beijing
• Okhotsk
• Honolulu, Hawaii
77
Calculator
You can perform calculations, including addition, subtraction, multiplication
and division using your phone.
To perform a calculation
Use
to enter a decimal point, and
to change the sign for a
number to a negative.
1. In standby mode, press
for the menu and Scheduler.
Press
for Calculator. The Calculator screen displays.
2. Use the keypad to enter the first number in your calculator. (Numbers
can be up to 9 digits long.)
3. Use the toggle arrows to set the operator for your calculation. Your
choices are:
[+] Addition, [-] Subtraction, [x] Multiplication, [/] Division.
4. Use the keypad to enter the second number into your calculator.
5. Press
to perform the calculation and view the result, or continue
to calculate with the same operator, or change the operator and
continue. Every time you change the operator, the previous calculation is
performed and the result is displayed as the bottom number on the
display screen.
6. Press
to perform the calculation and view the result.
78
Alarm
Your phone has an alarm clock that can be set to go off once, or daily at a
specified time.
Once set, the alarm is easy to change or turn off completely.
To set the alarm:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Scheduler.
for Alarm. Your options are Set and Release.
for Set.
5. Toggle
to the option you want to use. Your choices are Once, or
Daily.
6. Press
. The Alarm menu opens.
7. Using the keypad, enter the time for the alarm to activate. Select
to store the setting, or press
options menu.
to return to the previous alarm
•As your phone only supports a 12 hour time display, it is necessary
to press either
, or
. These keys represent A.M. and
P.M. respectively.
8. Should you wish to terminate the alarm follow steps 1 through 3 and
press
for Release. Press
to save, or press
to
return to the previous alarm options menu.
Note: Once an alarm is set, an alarm clock icon
displays on the screen in standby
mode. When the alarm is turned off the alarm clock icon
is removed.
Note: To change the alarm time, or turn the alarm off, repeat steps 1 through 3 above,
and follow the prompts.
79
Sounds
Ringer options
Your phone provides a variety of ringer options through the Sounds menu.
These options allow you to customize your ringer type and ringer volume
settings in order to easily recognize a certain type of incoming call, message or
scheduled event.
Note: To adjust your ringer volume (for example, to quickly turn it off or to the vibrate
mode before you enter a meeting, concert, etc.) see “Ringer volume” on page 74.
Adjusting ringer volume (rapidly)
From the standby mode, you can adjust the ringer (8 levels), set it to vibrate,
set it to 1-beep, or set it to mute using the toggle
“Up/Down” arrows.
Adjusting voice volume during a call
You can adjust the handset as well as the (optional) headset volume during a
call by using the toggle’s
up/down arrows.
Ringer volume
To activate the two options under the ringer volume option for Sounds.
1. In standby mode, press to display the main menu.
2. Press
3. Press
for Sounds.
for Ringer Vol. Two options display: Calls, and Alarm.
4. Press the numeric key, or highlight the option and select it using
5. The screen immediately displays the volume icon
the bars of
which will change according to the setting chosen, you can also press the
toggle
is reached, press
6. Press to return to the previous menu at any time.
down arrow to change the setting. When the desired setting
to save.
Note: When the lowest volume setting is reached, the phone automatically goes into
vibrate mode, physically alerting you to this option.
80
Ringer volume — Calls
Refer to “Ringer volume” on page 74 for instructions on operating this option.
Ringer volume — Alarm
Refer to “Ringer volume” on page 74 for instructions on operating this option.
Ringer type
Five monotone ringer types and fifteen melody tones can be found under the
ringer type option in the Sounds menu.
Ringer type — Voice Calls
To activate, view or change the ringer type for voice calls:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Ringer Type.
for Voice Calls.
4. Press
5. Use the toggle
arrow to locate and toggle through the 5 monotone
ringer types and 15 melody tones. Each tone plays as you toggle through
the options.
6. When the desired ringer type plays, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — Alarm
To activate, view or change the ringer type for the alarm:
1. In standby mode, press to display the main menu.
2. Press
3. Press
4. Press
for Sounds.
for Ringer Type.
for Alarm.
81
5. Use the
15 melody tones. Each tone plays as you toggle through the options.
6. When the desired ringer type plays, press to save the setting.
toggle arrows to locate the 5 monotone ringer types and
Note: You can press
to return to the previous menu at any time.
Ringer type — Data/Fax incoming
To activate, view or change the ringer type for incoming data/fax calls:
1. In standby mode, press to display the main menu.
2. Press
3. Press
4. Press
5. Use the
for Sounds.
for Ringer Type.
for Data/Fax In.
toggle arrows to locate the 5 monotone ringer types and
15 melody tones. Each tone plays as you toggle through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
Ringer type — Schedule alerts
To activate, view or change the ringer type for schedule alerts:
1. In standby mode, press to display the main menu.
2. Press
3. Press
4. Press
5. Use the
for Sounds.
for Ringer Type.
for Schedule.
toggle arrows to locate the 5 monotone ringer types and
15 melody tones. Each tone plays as you toggle through the options.
6. When the desired ringer type plays, press to save the setting.
Note: You can press
to return to the previous menu at any time.
82
Key beep
Key Beep allows you to adjust the tone volume that the keypad generates each
time you press a key. The display icon shows up to 8 levels (the loudest
setting). No bars indicate that the key beep function is silenced.
1. In standby mode, press
to display the main menu.
2. Press
for Sounds, then press for Key Beep.
3. Press the
toggle arrows to locate the 8 volume levels
.
4. When the desired volume is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
Alerts
Your phone will beep from time to time, this beep is called an alert beep. Alert
beeps can easily be turned on or off. This feature offers 7 different options:
Minute beep, Service, Connect, Disconnect, Fade, Roam, and Privacy.
Alerts — Minute beep
You can set the minute beep option to sound an alert 10 seconds before each
elapsed minute to remind you of the length of the current call.
To turn minute beep on or off:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Sounds.
for Alerts. Seven different options display: Minute beep,
Service, Connect, Disconnect, Fade, Roam, and Privacy. In this
exercise select the Minute beep option. (For other “Alerts” exercises
to work correctly, select the appropriate option.)
4. Press the
toggle arrows to choose between On or Off.
to save the setting.
5. When the desired setting is reached, press
Note: You can press
to return to the previous menu at any time.
83
Alerts — Service
You can set the service alert option to sound an alert when the phone goes in
and out of service coverage areas.
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
Alerts — Connect
With this option set to “On”, the phone sounds an alert when your call is
connected.
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
Alerts — Disconnect
When this option is set to to “On”, the phone sounds an alert when the phone
experiences a dropped or a failed call.
Note: You can press
experiences a failed or dropped call, a text message will display. Press
the prompt and return to standby mode. If the dropped call was an outgoing call from
your phone, you can redial the number automatically by pressing twice.
to return to the previous menu at any time. When a call
to clear
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
Alerts — Fade
With this option is set to to “On”, the phone sounds an alert when a dropped
call occurs during conversation in response to a signal fade.
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
84
Alerts — Roam
When this option is set to to “On”, the phone sounds a unique tone when you
leave your “home” service area when on a call.
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
Alerts — Privacy
When this option is set to to “On”, the phone sounds an alert when an
incoming calls is designated a “Privacy” call.
A
for “Privacy” will also appear on the display screen.
Refer to “Alerts — Minute beep” on page 77 for instructions on how to
operate this option.
Voice volume
This option enables you to adjust the voice volume of the earpiece while on a
call. The display icon shows up to 8 levels (the loudest setting).
To adjust the voice volume level:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Voice Volume.
4. Press the
toggle arrows to adjust the volume setting.
5. When the desired volume level is reached, press
setting.
to save the
Note: You can press
to return to the previous menu at any time.
85
Roam ringer
When this option is set to “On”, your phone sounds a unique tone when a call
is received in a “roam” service area.
(This feature is to “On” by default).
To set the roam ringer alert on or off:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Roam Ringer.
4. Press the
toggle arrows to choose between On or Off.
to save the setting.
5. When the desired setting is reached, press
Note: You can press
to return to the previous menu at any time.
Power on/off
When this option is set to on, the phone sounds an alert when the phone is
either powered on, or powered off.
To set the Power On/Off alert:
1. In standby mode, press
to display the main menu.
2. Press
for Sounds.
3. Press
for Power On/Off.
4. Press the
toggle arrows to choose between On or Off.
5. When the desired setting is reached, press
to save the setting.
Note: You can press
to return to the previous menu at any time.
86
Display
The following features offered under the Display menu allow you to customize
your phone.
•
•
•
•
•
•
•
Control when, and for how long, your backlight is active.
Define a personal greeting of up to 12 characters.
Display your own phone number.
Set the language.
Set time and date manually.
Automatically hyphenate phone numbers.
View the hardware and software versions of your phone.
Backlight
There are several options for setting the backlight features.
When the phone’s flip is closed, the backlight will remain off, this conserves
battery power. When the phone’s flip is open, the length of time that the
backlight remains active can be set to 7, 15, or 30 seconds. Remember that
backlight usage drains your battery faster.
To set the Backlight:
1. In standby mode, press
to display the main menu.
2. Press
for Display.
3. Press
for Backlight.
4. Press the
toggle arrows to go through the menu options:
Always Off, 7 seconds, 15 seconds, 30 seconds (after last key
press), or Flip Open.
5. When the desired setting is reached, press
to save.
87
Banner
This option allows you to edit and personalize the banner displayed on the
standby display screen.
Note: Enter the personal greeting using the keypad, Press
for T9 Word, ABC,
symbols and 123 options respectively
Note: The
key will also toggle through the same options in identical order, and
can be pressed for upper case characters.
To change the banner:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Display.
for Banner. Clear the existing banner by pressing
.
4. Enter your new banner (Up to 12 characters).
5. Press to save.
My phone #
To display your phone’s number:
1. In standby mode, press
to display the main menu.
2. Press
for the Display.
3. Press
for My Phone #. The phone’s number displays.
4. You can press
to return to the previous menu at any time.
88
Language
The language option on your phone can change the language of voice prompts,
menus, and key-input.
To change the language:
1. In standby mode, press
to display the main menu.
2. Press
for Display.
3. Press
for Language.
4. Toggle
5. Press
to highlight the language required.
to save.
Note: You can press
to return to the previous menu at any time.
Set time
Your phone is equipped with a standard clock. Your phone automatically
displays the time and date when in digital mode. This same information is
unavailable on the screen when your phone is out of service or in analog mode
when powered up.
To manually set the time and date:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for the Display.
for Set Time. The Time Set menu displays.
4. Enter the time (using the 12 hour format) and date. Use
and for P.M..
5. When the desired setting displays, press
for A.M.
to save.
Note: You can press
to return to the previous menu at any time.
89
Auto hyphen
With the option set to “Yes”, your phone automatically hyphenates numbers.
For example: 972-761-0000.
To set the Auto Hyphen option:
1. In standby mode, press
to display the main menu.
2. Press
for Display.
3. Press
for Auto Hyphen. The “On” and “Off” options display.
to highlight an option.
4. Toggle
5. Press
to save.
Note: You can press
to return to the previous menu at any time.
Version
You can view both the software version and hardware version running on your
phone. This feature is helpful if you need to call your carrier.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Display.
for Version. The hardware and software information
displays.
4. Press
to return to standby mode.
90
Voice dial
Your phone features Voice Dial(ing). When on a digital network, you can call
up to 20 stored names simply by speaking one of the names into the
microphone. Using the Voice Dialing feature requires that you first program
the phone to recognize the name of the person you are calling.
Note: Voice dialing entries cannot be connected to your phone book. If you wish to set
voice dialing for frequently used numbers in your phone book, you must separately
record the names and re-enter the same phone numbers into the Voice Dial memory
locations.
Tips on recording names
•
Avoid recording similar names phonetically. If you record a name similar
to one already stored in voice memory, the phone requests another
name.
•
•
•
Avoid recording in a noisy place.
Speak clearly and naturally.
Avoid very long or very short names. Names with two to five syllables are
recommended.
•
If a voice entry does not properly connect, you may need to record the
name and number again.
Record
The phone provides voice prompts and screen displays to guide you through
the recording process.
To program the phone for voice calling:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Record. The phone will prompt you to say the name
you want to record.
91
4. Wait for the beep and then say the name. For best results, use names with
at least two syllables, or use both a first and last name. The phone stores
the name as a “first” sample, and then prompts you to say the name
again.
5. Respond to the prompt by repeating the name exactly as you did the first
time. The phone stores the name as a “second” sample and then requests
the phone number.
6. Enter the phone number using the keypad.
7. Press
to save the number. The entered number displays, the
phone prompts “Recorded”. If the entered number matches a number
already stored in your Phone Book, the name also displays.
8. The screen then returns to the Voice Dial menu.
Review
To review voice calling entries:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Review. A list of stored numbers display. (The names
also display if stored in the Phone Book.)
4. Toggle to highlight the desired entry and press
recorded name is vocalized. Press while reviewing an entry to
. The
erase that same entry. When finished, the phone returns to standby
mode.
Note: You can locate the entries without having to listen to each one by using the toggle
arrows
, or you can listen to them all as they play in order if you press
.
92
Erase all
To erase all voice calling entries
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Erase All.
4. At the voice prompt and screen prompt, press
to confirm that you
wish to Erase All of the entries. A screen prompt will display when the
entries have been erased.
5. Press
at any time to exit without removing any voice entries.
Set active
Voice dialing is always active once you have programmed the phone to accept
voice entries and associated the phone numbers. To place voice activated calls,
press and hold
. Then say the name into the phone after you hear the
voice prompt and the beep.
Note: You can also initiate a voice call by opening the phone’s flip cover, when this
option is selected through the menu.
To change the Voice Dial activation options:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Voice Dial.
for Set Active.
Two options display: [*] Only and [*]/Flip.
4. Press
to save the setting.
•
•
•
[*]: Represents the number.
[*] Only: Enables voice calling only by pressing and holding
.
[*] /Flip: Enables voice calling either, by pressing and holding
or, by opening the phone’s flip cover.
93
Games
Your phone’s software allows you to play the following games:
•
•
Flying Tight
Run for Money
Flying tight
To play Flying tight:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Games.
for Flying tight. When the “start screen” is displayed,
pressing
play the game.
4. Press
takes you to the Help screen which describes how to
to begin the game.
Object
The object of the game is to fly the plane inside a cave through a maze of
obstacles for the longest possible time. Use the toggle to control and sustain the
plane’s flight path and avoid the cave’s wall. Keep your thumb on the toggle
pushing “up” repeatedly to counteract gravity that wants to pull the plane
down. The display timer shows how long you have managed to beat the odds.
Your life depends on how long you can avoid the creatures and objects that
appear to cross your path. If you hit the cave’s wall too much, or encounter the
creatures or objects too many times (3) the game is over. You can pick up “E”
(energy) along the way to extend your life, and a “B” (bomb) to destroy all the
objects and creatures. The longer you manage to stay “alive”, the higher your
score. A high score is recorded each time you play.
94
Key commands
The following options are displayed prior to the start of the game:
Press the “up” arrow repeatedly to keep the plane in the air.
Press the “down” arrow repeatedly to lower the plane.
Press to begin the game.
Press to end the game.
Press to end the game.
Run for money
To play Run for money:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Games.
for Run for money. When the “start screen” is displayed,
pressing
play the game.
takes you to the Help screen which describes how to
4. Press
to begin the game.
Object
The object of the game is to control the creature on the skate board, avoid
collisions with motorcycles, and to pick up as many “Money” bags as you can
before the game ends. Picking up a money bag increases the “Money” count.
However, each time you are hit by a motorcycle your “Money” count resets
itself to zero. You must pick up the specified number of money bags during
each stage in order to advance to the next stage of the game. If a stage ends,
and you have less than the specified number of money bags the game is over. A
high score for both money and stage is recorded each time you play.
95
Setup
The following features allow you to personalize your phone.
Auto retry
With this option activated, your phone automatically retries the call when a
connection fails. Dependent upon your location, the number of raters may
vary.
To enable Auto Retry.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Setup.
for Auto Retry. The Auto Retry screen displays.
the toggle arrows to highlight an option. The options are:
off, every 10 seconds, every 30 seconds and every 60 seconds.
5. Press
6. Pressing
to save your option.
returns you to the previous screen.
Auto answer
For further information on this feature see “Setting auto answer” on page 43.
97
Answer mode
With this option activated, your phone will allow you to select a specific answer
mode when you receive an incoming call. Your phone can be preset to answer
when you do any of the following:
•
•
•
By SEND key: You can answer the phone by pressing
.
By Flip Open: You can answer the phone by opening the phone’s flip.
By any key: You can answer the call by pressing any key.
To set Answer Mode:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Answer Mode. The Answer Mode screen displays.
to highlight an option. The options are:
4. Use the toggle arrows
By flip open, By SEND key, and By any key.
5. Press
6. Pressing
to save your option.
returns you to the previous screen.
Tone length
Some older phones recognize only longer tones. Therefore you may have to
change the tone length for some calls. When calling a paging system or a credit
card company remember that your phone should be set in the normal mode.
To change the tone length:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Tone Length. The Tone Length screen displays.
to toggle between “normal”, and “long”.
to save your option.
returns you to the previous screen.
4. Use the toggle arrows
5. Press
6. Pressing
98
Set NAM
Your Samsung phone can store two NAMs (NAM stands for Numerical
Assignment Module, and is essentially your phone number). This means that
you can have two phone numbers on one phone, and you can quickly and
easily switch your service back and forth between the two numbers using the
NAM menu.
Note: Each NAM has an associated set of system roaming settings. See “Set network” on
page 98 for information on these settings.
To select the NAM you want to use:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for NAM.
4. Use the toggle arrows
to toggle between NAM 1 and NAM 2.
5. Press
to save your option of choice.
returns you to the previous screen.
6. Pressing
Note: If you change your NAM, the phone automatically reboots and acquires service
using the new NAM.
99
Set system
Your Samsung phone allows you to set the preferred system. Changing this
setting affects your charges, so contact your service provider to determine the
best roaming methods for you.
To select the system you want to use:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Set System. The Set System screen displays.
to select an option. The options are:
4. Use the toggle arrows
Home only, Automatic-A, and Automatic-B.
5. Press
6. Pressing
to save.
returns you to the Setup menu.
•
Automatic-A: With this setting, your phone will always try your calls
using the Preferred Roaming List loaded into your phone, but if your
phone cannot find any preferred systems, then it will attempt to acquire
any digital or analog “A” system. In a wireless service area, there are
usually at least two service providers which are referred to as “A” and
“B” systems. Your service provider will provide you information about
this when you sign up for service.
•
•
Automatic-B: With this setting, your phone will always try your calls
using the Preferred Roaming List loaded into your phone, but if your
phone cannot find any preferred systems, then it will attempt to acquire
any digital or analog “B” systems.
Home Only: With this setting, you cannot roam. If your home system is
not available then your call will not be connected and the No Service
icon is displayed. In some service areas, an operator may come on-line
and ask you how you would prefer to pay for the call.
100
Data/fax
Your Samsung phone is capable of sending and receiving digital data and fax
calls when connected to a computing device (laptop, desktop, hand held,
palmtop, etc.) running Windows 95, Windows 98, Windows 2000, Windows
ME, or Windows NT. Your Samsung phone functions just like a typical modem
on your PC, enabling you to use wireless data involving a wide variety of
Windows software applications.
To use digital data or fax services with your Samsung phone, you will need to
obtain a digital data/fax kit from your service provider. This kit will contain the
necessary cables, software, and documentation required for you to connect
and use your phone with your computing device. To set up Data/Fax calls:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Data/Fax. The Data Mode screen displays.
to select an option. The options are:
4. Use the toggle arrows
data/fax off, fax for next call, fax until powered off, data for
next call, and data until powered off.
5. Press
6. Pressing
to save your option of choice.
returns you to the previous screen.
•
•
data/fax off: (No incoming Data/Fax calls can be received.)
fax for next call: (Waiting for Fax Call. No Voice Calls can be received
for next 10 minutes.)
•
•
fax until powered off: (No Voice Calls can be received.)
data for next call: (Waiting for data call. No voice calls can be
received.)
•
data until powered off: (No voice calls can be received.)
Note: The phone must be on a digital network to receive or send faxes and data. When
you are in a digital network, the icon is displayed.
101
Receiving a fax
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Data/Fax.
4. Use the toggle arrows
5. Press
to highlight fax for next call.
to save this option.
In the Fax program on your PC set up Answer Mode. Click on “Receive” and
select either Automatic Receive (recommended), or Manual Receive.
Your phone is now ready to receive an incoming fax.
Note: Once you have set your phone’s mode to “fax for next call”, you cannot receive
regular voice calls until you change back to “data/fax off”. or a fax is received.
Changing your phone back to voice calling
To change your phone back to voice calling:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Setup.
for Data/Fax.
4. Use the toggle arrows
5. Press
to highlight data/fax off.
to save this option. The screen displays “No incoming
Data/Fax calls can be received”.
102
Ending a fax or data call
Some of the normal ways to end a call, like closing the phone, will not end a
fax or data call. Always close the connection through the application on your
computer. Your phone will return to standby mode. Disconnecting the data
cable or turning off your phone will also end a data or fax call, but may disrupt
your computer.
Sending a fax or data file
When connected to a computing device, your phone allows wireless fax and
data transmissions. Your computing device software initiates the call to the
destination phone number. Your Samsung phone functions as a wireless
modem to send the fax or data file to the number designated by your PC
software.
103
Set network
Your phone is set to digital mode. When in a weak signal area you may wish to
seek better coverage. Your phone allows you to do this, forcibly searching for
analog service. To set network:
1. In standby mode, press
to display the main menu.
2. Press
for Setup.
for Set Network. Select an option, or press to
3. Press
cancel.
•
1-Time Analog Call: This switches your phone into analog mode. Your
phone will remain in analog mode for up to 10 minutes until a call is
made. At that time your phone will automatically return to default.
•
Automatic: This feature automatically looks for all forms of service.
(1.9 MHZ, 800 MHZ, AMPS) according to the PRL (Preferred Roaming
List) supplied by your carrier.
4. Press
to toggle between options, and press
to save.
Audio AGC - whisper mode
Audio AGC (Automatic Gain Control) or “Whisper Mode” automatically
increases the microphone gain levels to allow the other party to hear your
voice even though you may be whispering.
To set whisper mode:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
5. Press
for Setup.
for Whisper Mode.
to toggle between “on” and “off”.
to save.
Note: In normal environments, this feature may cause the volume of your voice to be too
loud.
104
Mail Kit
Mail Kit allows you to create, send, read, and save your messages. Your phone
receives three kinds of messages: voicemail, text, and browser messages. To
access Mail kit, press
.
Note: Contact your service provider about activating the sending and receiving short
message feature. This feature will only be available if your service provider’s network
supports it.
The Mail kit contains the following eight menus:
•
•
•
•
•
•
•
•
New Messages
Voice
Inbox
Outbox
Filed Msg
WebAlert
Erase Msg
Msg Setup
Mobile Originating (MO)
SMS text messaging
Your Samsung N150 phone is able to send and receive text messages. When a
message is received, your phone will sound an alert tone (unless turned off)
and a new message pop-up window will be displayed on the screen.
Note: A total of 40 messages are available for messages. This memory is shared between
all messages. The number of messages that can be stored is dependent upon the length
of the messages. Messages that you send can contain a total of 160 characters.
105
Creating SMS Text Messages
1. In standby mode, press
to display Mail Kit.
2. Press
3. Press
for New Messages. The screen displays Send To:.
to select from options. (Phone Book, T9 Word, ABC,
Symbol, 123).
•
Phone Book allows you to search either by Name, Entry, or
RelationSrch.
4. Toggle
5. Toggle
to highlight an option, then press
to highlight, then press
to select.
to select the entry mode.
to continue.
When the information is complete press
6. Enter the message using the keypad and selected method of entry. When
finished, press . This returns you to the New Message menu.
To continue, select from the following two menus:
7. Pressing opens the Options menu. Select from the following:
Priority: Allows you to select either Urgent or Normal.
•
•
Validity: Allows you to select the period of time you wish to message to
be available to the recipient. The choices are: None, 30 min., 1 hour,
2 hours, 12 hours, 1 day, 2 days, and 3 days,
•
Send Later: Allows you to select from: None, 30 min., 1 hour,
2 hours, 12 hours, 1 day, 2 days, and 3 days,
•
•
Delivery Ack: Select either On or Off as required.
Message: Do not save. (Default). Others options are: Prompt Save
and Auto Save.
8. Pressing
opens the Action menu . Select from the following:
Send: Allows you to send the message.
OK: Allows you to save the message.
•
•
•
•
CLR: Allows return to the previous menu.
END: Allows you to cancel the message and end the session.
106
Entering text, numbers, and/or symbols
At various times when using your phone, you will need to enter text in the
display screen. Some examples would be: adding an E-mail address, storing a
name in the Phone Book, entering events in the Scheduler, or inputting text
messages. If you want to enter text on the display screen.
1. You must be in one of the given examples in order to select
view the menu options: T9 Word represented by , and
ABC represented by , and . Symbol represented by
and Numeric represented by
2. After you are in the correct menu, use the toggle to highlight your option
to
,
.
,
,
.
choice, then press
remember you can:
to save the option. Enter your information and
•
•
Press
to insert a space.
Press
to clear the last number, letter, or symbol, or
Press and hold
to completely clear the input field.
If you wish to change the input mode again, after pressing
options: T9 Word, ABC, Symbol, and Numeric, use the toggle arrows to
highlight your option choice, then press to save.
ABC: This is the text entry mode. Upper case entry mode
case entry mode icon, and initial upper case with lower case entry
mode icon: These icons represent the alphabetical text entry modes
and can also be used for multi-tap typing. For example: quickly press
three times to display the letter C, and press twice to
display the letter K.
to view the
•
icon, lower
•
T9 Word: This is the predictive word entry mode. You can quickly and
easily enter frequently used words.
•
•
Symbol: Symbol entry used with numeric keys and associated symbols.
Numeric: This is the number entry mode.
107
Alphabetical text entry
Alphabetical text entry characters may be entered in ABC mode, by pressing the
corresponding key to the letter you wish to enter.
Press the same key repeatedly to change between the characters represented
by each key. To change capitalization formats while entering text, press
to toggle between
,
, and
modes.
Entering numbers
Numeric mode
enables you to enter numbers into a text message.
Symbol entry
Symbol mode
enables you to enter symbols into a text message. Use
to display the options, then press the toggle arrows up/down to select
the symbol option. When displayed, use the toggle to manipulate the symbols.
When in Symbol input mode, press the key shown on the display under the
required symbol. Here are the list of available symbol characters:
•
•
•
•
•
•
•
•
•
!
_
\ ;
@ + ? i
#
=
:
. ¿
%
&
*
, <<
” { >>
,
}
< ( $ ^
>
-
) [ ꢀ
/
]
º
108
®
T9 Word text entry
T9 Word, or T9 for “text on 9 keys”, requires only one key press per letter, and
recognizes the most commonly used word of a numeric sequence.
For example, to enter the word “hello”, you can spell out the word by pressing
only five keys, 4-3-5-5-6. T9 Text Input recognizes the most commonly used
word for that numeric sequence is “hello”. If two or more words share the
same numeric sequence, T9 provides the most commonly used word, with the
ability to toggle to the next most commonly used word by pressing
.
Press repeatedly to display all of the available words that T9 knows.
When the word you need displays, continue to enter text in the same way, or
change to another text or character entry mode.
Note: To type words not found in the T9 mode, change the text input mode to ABC
mode. You can include numbers between letters without exiting the T9 input mode by
pressing and holding the desired numeric key.
109
New messages
You can create text or e-mail messages to send to another party. Each message
can be sent to up to 10 numbers or E-mail addresses at a time. Message
options allow you to set a priority, validate a time period, or send a message
after a specified time. You can also file draft messages yet to be sent, into a
folder, or save sent messages to the Outbox to review their delivery status.
Note: Sending messages is only supported in digital networks. This feature will only be
available if your service provider’s network supports it.
Note: Once you commence entering the data to be sent, the number of characters
available will be displayed on the screen.
1. In standby mode, press
2. Press for New Messages. The screen displays Send To: ([This
is a required entry field], once the recipient’s data is entered it can be
sent at any time by pressing .) (Pressing permits selection
to display Mail Kit.
from the options: Phone Book, T9 Word, ABC, Symbol and 123.
•
Phone Book: Allows you to retrieve the Phone Number or e-mail
address to which the data is to be sent using the options: Find Name,
Find Entry and/or RelationSrch .
•
T9 Word, ABC, Symbol and 123 are text entry modes.
3. After finding and entering the Send To: information, press
to go
to the Message menu.
4. Enter your message data, (press
when finished, press to return to the New Message menu.
5. If the same message is to be sent to multiple recipients, press
to select your text entry mode),
to
go to the Send To: menu. Entry “01” is the first destination, the address
is already entered (there are 10 destinations available.) Pressing
allows you to select the Edit option if you so require, if not.
110
6. Select 1, or select from the 10 multiple destinations available using the
toggle arrows. (Press
options if required), when finished press
to open the PhoneBook or Edit
.
7. To add additional recipient addresses, repeat the above steps. The
multiple destinations entered will be updated on the Send To: screen.
8. Press
at any time to despatch the information.
Voice
Refer to “Reviewing voice mails and text messages” on page 112, for
instructions on how to operate this option.
Responding to a Message
Note: For further information see “Message options” on page 114.
Inbox
Your phone receives incoming messages in both standby and talk modes.
When you are on a call and receive a message, your phone automatically mutes
the ringer and displays a pop-up window which displays two options: Ignore
and Text. Select Text to read the message or choose Ignore to ignore the
message.
Outbox
Your phone stores messages in Outbox, regardless of whether the message was
successfully transmitted. If “Do Not Save” was not set in the Save Message
setting under Msg Setup, you can review, resend, or delete any message stored
in the Outbox. You can also verify if a message or E-Mail was successfully
transmitted, and at what date and time by opening the Delivery
Acknowledgement feature.
Reviewing outbox
To review outgoing messages:
1. In standby mode, press
, to display the Mail Kit menu.
111
2. Press
for Outbox. A list of messages displays.
An icon displayed next to the entry number represents the transmission status:
•
was acknowledged (Delivery Ack).
•
•
indicates that the message was transmitted but is, as yet, undelivered.
indicates that the message transmission failed.
3. Using the
press
toggle, highlight the message you wish to review and
to select it. Across the top of the new display screen will
display “Tx Msg **”, (where ** represents the message number). The
display screen will also show the date and time of transmission, together
with the Send to #, E-Mail address, call back number, the message and
the delivery status.
4. Press
for further options. A “Sent Msg” menu will display.
•
Select “Re-send” to resend the message, press
to resend with
the same message settings, or follow the steps shown in “Web alert” on
page 109, to edit and resend the message.
•
Select “Delete” to delete the message from Outbox.
Message memory capacity
Your phone can store up to 40 messages combined for all messages. The
storage capacity includes all received, sent, filed message types, VMN
(Voicemail Notification), and text messages. The number of messages stored,
depends upon the length of each message. When message memory reaches
over 75% capacity, the screen displays “Memory is **% full. Erase old
messages”, where ** is between 75% to 100%. At 100% capacity, the screen
displays a text notification and rejects additional incoming messages until you
erase the stored messages from Inbox, Outbox or Filed Msg.
112
Messages and lock mode
Incoming messages are received even when your phone is in Lock Mode. The
screen will display the time and date of the message but you cannot access the
message. To access the message, unlock the phone to proceed
Delivery acknowledgement
If Delivery Acknowledgement is set to “on” by using either Message Setup or
New Messages options in the Mail Kit menu, a message alert will be sent to your
phone. This Delivery Acknowledgement message alert appears on the phone’s
display screen, indicating that the message was successfully delivered, together
with the recipient’s address and the delivery date and time. This information
will be displayed on your screen until you press any key, it will include the
delivered date/time stamp, and text notification of “Message to (Send To #, or
E-mail Address) delivered.”
Note: This Delivery Acknowledgement message will not be stored into memory as it is a
“one-time” only display. Also, if multiple messages were transmitted consecutively within
a short time period, only information relating to the last message delivered will display.
Note: Delivery Acknowledgement is a message sent from the system to indicate that a
message arrived at its destination without error.
Use the following method to review the delivery status of an outgoing message:
1. In standby mode, press
2. Press
to display the Mail Kit menu.
for Outbox.
3. Toggle to view the delivered date/time stamp for the transmitted message
located at the bottom of the display.
4. Pressing
returns you to the previous screen.
Note: While reviewing a message, you can press
for more options. See
“Message options” on page 114.
113
Filed message
Your phone can store draft messages that are yet to be sent in the Filed Msg
folder. You can access this folder at a later time to edit and send the message.
Note: The memory capacity available for the Filed Msg folder is relative to the Outbox
memory capacity.
To store unsent messages to the Filed Msg folder:
1. In standby mode, press
2. Press for New Messages. The Send To: screen displays. Press
for the options. Toggle to highlight an option and press
, to display the Mail Kit menu.
.
Note: If the Phone Book option is chosen the Find Name, Find Entry and Relationsrch
options become available. Toggle to highlight the option of choice and press
3. Enter the Send To: information and press
. The Message
screen displays.
4. Press
for the options. Toggle to highlight an option and press
.
5. Enter a message, when finished press
screen displays.
, the NEW MESSAGES
6. Press
7. Press
for Action.
for Filed Msg.
To access unsent messages and continue editing:
1. Press
2. Press
, to display the Mail Kit menu.
for Filed Msg. The number of pending messages display
next to the Filed Msg text. The filed messages will display in order.
3. Toggle to highlight the message, and press to open.
4. Follow the steps shown in “Web alert” on page 109, to edit and resend
the message.
114
Web alert
Your phone alerts you with incoming browser messages. When a new message
arrives, your phone will display a text notification together with an audible
alert. You can access Web Alert from the Mail Kit menu.
Erase message
1. In standby mode, press
, to display Mail Kit.
2. Press
for Erase Msg.
3. Toggle
to highlight an option from those offered:
Voice, OldInbox, NewInbox, Outbox, Filed, and All Messages.
4. Press
to complete the action.
Message setup
1. In standby mode, press
, to display Mail Kit.
2. Press
for Message setup.
3. Toggle
to highlight an option from those offered:
General, and New Messages.
4. Press
to complete the action.
You can preset a number of options for general settings or new messages. The
message indicator is displayed and remains on the screen until you listen to the
new voicemail message, read the New BrowserMsg or Text Msg.
General
Offers a number of separate features, Scroll Timer, Msg. Reminder, Message
Volume, and Ringer Type.
Scroll Timer
Scroll Timer allows you to select the amount of time you would like your scroll
to be available before closing.
The choices are: Off, 1/2/3/4/5 seconds.
115
Msg. Reminder
Message Reminder allows you to select the number of times you would like to
be reminded that you have a message.
The choices are: Off, Once, Every 2 mins.
Message Volume
1. When selected, the screen immediately displays the volume icon
,
the bars of which will change according to the setting chosen. When the
desired volume setting is reached, press
to save.
2. Press to return to the previous menu at any time.
vibrate mode, physically alerting you to this option.
Ringer Type
Four options can be found under this heading. All have five monotone ringer
types and fifteen melody tones.
1. Use the toggle
arrow to locate and toggle through the ringer
types. Each tone plays as you toggle through the options.
2. When the desired ringer type plays, press
to save the setting.
Ringer Type — Voice Mail
Refer to “Ringer Type” on page 110 for instructions on how to operate this
option.
Ringer Type — Page
Refer to “Ringer Type” on page 110 for instructions on how to operate this
option.
Ringer Type — Text
Refer to “Ringer Type” on page 110 for instructions on how to operate this
option.
116
Ringer Type — Browser Msg
Refer to “Ringer Type” on page 110 for instructions on how to operate this
option.
New Message
Offers a number of options. Each option offers different features.
Callback #
Press
to automatically call the number displayed on the screen.
Save Message
You are offered three options. Select
Prompt Save - saves the message.
Do Not Save - does not save the message
to save the setting.
Auto Save - automatically saves the created message to the Outbox after the
message has been transmitted.
Entry Method
You can toggle between Alphabet and T9 Word (predictive keypad) for the
default setting. Select
to save the setting.
Delivery Ack.
Toggle to highlight On or Off. Select
to save the setting.
Canned Msg.
There are a total of 10 frequently used canned messages pre-programmed into
your phone. You can select the number that is associated with each canned
message, and press
to edit it.
Once you have completed the editing of a canned message, press
to
save. For further information see “List of main and sub menus” on page 21.
117
Receiving a message in standby mode
When your phone receives incoming messages in standby mode, the ringer
sounds, (unless it is turned off), and the screen displays: “New Voicemail”,
“New Text”, “New Page” or “New BrowserMsg”. The message icon is
displayed, and remains on display until you listen to, or read, the new message.
Receiving a message while on a call
When you receive message when you are on a call, the New Messages screen
displays two options: “Ignore” and“ Text”. The “closed envelope” icon
is displayed.
You can easily review the new message while on the call by just pressing
. Your call will not be disconnected, and you can ask the other party to
wait while you review the message. If you wish to ignore the message, just
select that option and continue with your call.
Reviewing voice mails and text
messages
When a message arrives, you can recall the sender’s call back number if it is
available, by pressing
. If you only wish to review the message, press
. The Inbox Msg list provides options for reviewing the sender’s name,
number, date and time information, and the message.
118
Reviewing stored voicemail and text
messages in standby mode
1. In standby mode, press
, to display the Mail Kit menu. The
number of received or sent messages displays next to the associated
message type in the menu.
2. Press
for Voice. The date and time for the last voice mail
message received is displayed, together with a notification of the number
of new voice mail messages.
•You can press
voice mails.
twice to call your mail box directly to review
•You can press
for Inbox. A list of messages displays.
•
•
next to an entry number indicates an urgent message.
next to an entry number indicates that the message has already
been read.
3. Use the
review, press
•While reviewing the message, you can press the
toggle arrows to highlight the message you wish to
to open it.
toggle
arrow to locate the message information such as date and time,
sender’s call back number, senders number, E-Mail
address, and message. However, if you wait a few seconds the
phone will automatically scroll through the display.
•To review other messages. Using the
toggle press the
appropriate arrow to the right to review the next message, or to the
left to review the previous message.
4. Pressing
returns you to the previous screen.
Note: When reviewing a message, you can press
for further options. For further
information see “Message options” on page 114.
Note: When in standby mode, press and hold down
mail.
to automatically dial voice
119
Message options
When reviewing Messages, the menu provides a number of options. You can
return a call or text message to the phone number, or e-mail address in that
message, or you can forward the message to another.
1. In standby mode, press
, to display the Mail Kit menu. A number
of received or sent messages displays next to the associated message type
in the menu.
2. For Text messages use the
to review, press to open it.
3. Press to view the following options:
toggle to locate the message you wish
“Reply”, “Forward”, “Delete”, “Save Address” and “Save cb#”
•Reply: to reply to the sender. The phone accesses the “New
Message” menu and copies the sender’s originating address to
the “Send To:” field.
•Forward: to forward the message to another. The phone accesses
the “New Message” menu, and copies the sender’s message
(body) to the “Message” field.
•Delete: to delete the message from the Inbox.
•Save addr: to save the sender’s e-mail address to the Phone Book.
The address is automatically copied into the Add Entry or E-mail
Entry field. For further information see “Add entry” on page 44
and “Adding an e-mail address” on page 50 for assistance on
saving phone numbers or E-mail addresses to the Phone Book.
•Save cb#: to save the call back number to the Phone Book. The
number is automatically copied to the Add Entry field.
4. Pressing
returns you to the previous Inbox messages list screen.
120
Security
Your phone provides security options, including a user-programmable lock
code and emergency/secret phone number features. To access the Security
menu in standby mode, press
,
, and then enter the 4-digit lock
code (normally the lock code is the last 4-digits of your phone number). Press
the associated digit key to access one of the following Security options:
•
•
•
•
•
•
•
•
1. Lock Mode
2. Restrict
3. Lockcode
4. Emergency #
5. Send PIN
6. Clear MEM
7. Reset Phone
8. Voice Privacy
Lock mode
Locking the phone limits all outgoing calls except calls to the three hard-coded
emergency numbers (911, *911 and #911), and the three user-programmable
emergency/secret numbers.
You can lock the phone manually during use, or set the phone to lock
automatically when it is turned on. When the phone is in Lock Mode, you can
answer incoming calls, but you must unlock the phone to place outgoing calls
(except to emergency and secret numbers).
Locking the phone
The Security menu allows you to lock the phone manually or automatically
when powering on your phone or to leave the phone unlocked.
To lock the phone:
1. In standby mode, press
to display the main menu.
2. Press for Security and enter your current lock code.
121
3. Press
for Lock Mode. Use the toggle
to locate an option:
•Never: The phone remains unlocked.
•Now: The phone locks immediately and stays locked until the lock
code is entered.
•On Power-Up: The phone locks automatically the next time your
phone is powered on and stays locked until the lock code is
entered.
4. Press
to save the setting.
Unlocking the phone
When the phone is locked, pressing
,
, or
causes the
phone to display “User Lock”. Just enter the phone’s lock code, and the
phone is immediately unlocked.
Calling in lock mode
You can place emergency calls and to the 3 confidential numbers you
programmed in the lock mode. To place normal outgoing calls in lock mode,
enter the lock code to unlock the phone, and then call the phone number.
To place an outgoing call in lock mode:
To call an emergency or confidential number, enter the number and then press
.
Restricting the use of your phone
This feature allows you to restrict the use of your phone.
1. In standby mode, press
to display the main menu.
2. Press
for Security. Enter your current lock code.
3. Press
for Restrict. The ‘Restrict Phone’ screen displays.
4. Use the toggle
to locate the ‘Yes’ or ‘No’ option offered, and press
to save the option of choice.
returns you to the previous screen.
5. Pressing
122
Lockcode
The default lock code for your phone is generally the last four digits of your
phone number. You can enter a personal lock code and later change the lock
code as often as you like.
To enter a new lock code:
1. In standby mode, press
2. Press for Security.
3. Enter your current lock code.
4. Press for Lock Code. The screen prompts “ENTER NEW
to display the main menu.
CODE”. Enter a new, 4-digit lock code by pressing the keypad. You will
be prompted to “RE-ENTER NEW CODE”. Enter the same 4-digit lock
code.
5. Press
to save the new lock code, or press
to exit.
Note: Your phone does not allow viewing of the lock code unless you know the lock
code (this is for obvious security reasons). So, if you change the lock code, be sure to
write down or memorize the new code.
Emergency #’s
Your phone provides the option of storing three emergency numbers. Each
number can be up to 32 digits.
All emergency numbers can be manually called at any time even when your
phone is locked or restricted. This can be a useful feature for controlling what
numbers can be called from your phone.
Note: Emergency numbers 911, *911, and #911 are hard-coded to your phone. You can
dial these numbers by pressing
after number entry at any time, even when the
phone is locked or restricted. If you call 911 an audible tone is heard and an
“Emergency” prompt is displayed during the duration of the call.
123
Because of various transmission methods, network parameters, and user
settings used to complete a call from your wireless phone, a connection
cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks
at all times.
DO NOT depend on this phone as a primary method of calling 911 or for any
other essential or emergency communications.
Remember to always turn your phone on and check for adequate signal
strength before placing a call.
Storing emergency numbers
To store emergency numbers:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
4. Press
for Security and enter your current lock code.
for Emergency #.
,
, or
to select from the three entry
openings.
5. Enter the emergency number. Up to 32 digits can be entered for each
number.
6. Press
7. Press
to save the number entered.
to exit and return to the previous menu.
Calling emergency numbers in lock mode
To call emergency numbers in lock mode:
1. In standby mode, use the keypad to enter the emergency number.
2. Press
to place the call.
124
Send PIN
The PIN (Personal Identification Number) feature prevents your phone from
being used by unauthorized persons. Contact your service provider for
complete information on this feature.
To set your phone to prompt for your PIN to be sent to the system whenever a
call is placed.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Send PIN.
4. Choose between Never or Prompt.
5. Press to save.
Note: Your service provider must enable this feature and assign you a PIN in order for
this feature to work.
Clear MEM
Clear MEM erases your Phone Book and Voice Dial recordings. Personal
settings (the call log, Mail Kit messages, Schedules, or other phone feature
settings), are unaffected by clearing the memory on your phone. This feature is
useful if you want to give your phone to a friend or family member, or if you
want to erase all of your phone numbers. To clear your phone’s memory:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Clear MEM. A confirmation prompt “Proceed” will
display.
4. Press
operation.
to clear the phone’s memory, or press
to cancel the
Note: After a few seconds, a prompt “Erased” message will display and the phone will
return to standby mode.
125
Resetting your phone
Resetting the phone returns all setup options to the factory default settings.
To reset the phone:
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Reset Phone. A confirmation prompt displays asking if
you want to “Proceed”.
4. Press to reset the phone or press
to cancel the operation.
Note: This may take up to 20 seconds to complete. Once complete, the phone will
automatically power cycle itself and return to standby mode.
Voice privacy
When in an area that supports the voice privacy option and it is enabled, the
phone makes an audible beep.
To activate voice privacy.
1. In standby mode, press
to display the main menu.
2. Press
3. Press
for Security and enter your current lock code.
for Voice Privacy. Select “Enhanced” to activate, or
“Standard” to deactivate the Voice Privacy feature.
4. Press to save the setting, or press to cancel.
Note: Your service provider must enable this feature. Contact your service provider to
verify if this feature is available on their network.
Note: Your phone’s display screen will display a
icon when the phone’s voice
privacy is enabled. If in an area that does support voice privacy the character
displayed.
is
126
In-Use Menu
Your phone includes both a standby menu and an In-Use menu. The In-Use
menu is displayed by pressing
while the phone is being used during a
call in progress. The In-Use menu options are:
•
•
Mute/Quit - Mutes or (Un)mutes your end of a phone conversation so
that the recipient can hear nothing.
Calls - Checks your call log for outgoing, incoming, and missed calls.
You can also erase the logs from this menu.
•
•
Phone Book - Accesses the Phone Book menu options.
Silent/Quit - Activates or deactivates the “Silent keypad” feature. When
set to the silent mode, your keypad’s tone is not sent out to the calling
party. However, this feature should not be used when you access
automated services that require you to select options, or enter numbers
using the keypad.
•
Send Tel # - Sends your phone number to the calling party or
automated services.
•
•
My Phone # - Displays the phone’s own number.
Version - Displays the version of the software and hardware that is being
used on the phone.
•
Voice Privacy - Although your conversation is securely encrypted to
prevent eavesdropping when used in digital mode, this feature extends
the encryption when set to the enhanced mode.
127
Usage guidelines —
all about performance and safety
Understanding signal strength
The quality of each call you make or receive, is dependent upon the signal
strength in your area. Your phone will inform you of the current signal strength
by displaying a number of bars next to the signal strength icon. The more bars
displayed, the stronger the signal. The signal strength indicator (
)
displays in the upper left corner of your display screen. The voice quality of
your phone will always be at its clearest when the antenna is fully raised. If
you’re inside a building, reception may be much better near a window.
Understanding the power save mode
If you are trying to use your phone in an area where the signal is too weak, the
Power Save feature will automatically activate to conserve battery power when
you have been unable to pick up a signal for 15 minutes. If your phone is on, it
will periodically recheck service availability, or you can do so yourself
manually by pressing any key. A message will be displayed on the screen any
time Power Save has been activated. When a signal is found, your phone
returns to standby mode.
Understanding how your phone
operates
Your phone is basically a radio transmitter and receiver. When it is turned on,
it receives and transmits radio frequency (RF) signals. When your phone is in
use, the system handling your call controls the power level. This power can
range from 0.006 watts to 0.2 watts in digital mode.
Specifications are subject to change
The information contained in this manual is believed to be correct at the time
of printing, however, Samsung reserves the right to change or modify any of the
specifications without notice or obligation to update existing units.
128
FCC RF Exposure information
The design of your Samsung Phone complies with updated NCRP standards
described below:
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More
than 120 scientists, engineers and physicians from universities, government
health agencies and industries developed this updated standard after reviewing
the available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE
standard and the guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Use only the supplied or an approved antenna. Unauthorized antennas,
modifications, or attachments could impair call quality, damage the phone, or
result in violation of FCC regulations
Do not use the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact your local
dealer for a replacement antenna. The design of the phone complies with these
updated standards. Of course, if you want to limit RF exposure even further
than the updated standard, you can choose to control the duration of your calls
and operate your phone in the most power-efficient manner.
•
•
You should not touch the antenna unnecessarily when using the phone.
Touching the antenna may affect the call quality and may cause the unit to
operate at higher power than it would need otherwise.
When using the handset, hold the handset just as you would hold any
other telephone, and keep the antenna pointed up and over your
shoulder.
•
•
Use of hands-free devices will further limit RF exposure.
129
Body-worn operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use a Samsung supplied or approved carrying case,
holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure the antenna is at least one inch (2.5 centimeters) from your
body when transmitting. Use of non-Samsung approved accessories may violate
FCC RF exposure guidelines.
Vehicle mounted external antenna
(if available)
A minimum separation distance of 7.9 inches (20 cm) must be maintained
between a person and the vehicle mounted external antenna to satisfy FCC RF
exposure requirements.
Note: For more information about RF exposure, please visit the FCC website at
www.fcc.gov.
How to order accessories
Most Samsung accessories can be purchased by visiting our web site at
www.samsungtelecom.com or calling 1.800.SAMSUNG.
The accessories available for this phone include:
•
•
•
•
•
•
•
•
•
Travel adaptor
Desktop Rapid Charger
Hands-free headset
Car adaptor
Standard, and Extended-life batteries
Hands-free car kit
Data cable
Leather case
Holster
The use of any other power accessory will invalidate any approval or warranty
applying to the phone, and may be dangerous.
130
When you disconnect the power cord of any accessory, grasp and pull the
connector, not the cord.
IT IS EXTREMELY IMPORTANT THAT ONLY GENUINE SAMSUNG
AUTHORIZED ACCESSORIES BE UTILIZED WITH YOUR SAMSUNG
PHONE. THIS IS BECAUSE ACCESSORIES MIGHT APPEAR TO BE A
PERFECT MATCH, AND LABELED SUITABLE FOR YOUR SAMSUNG
PHONE, BUT THEY CAN CHARGE AT DIFFERENT CURRENT RATES. THE
CURRENT PROVIDED THROUGH THE ACCESSORY MAY NOT MATCH
THE CURRENT THAT IS REQUIRED BY YOUR SAMSUNG PHONE AND
THE RESULT OF USING AN UNAUTHORIZED ACCESSORY MAY BE A
BATTERY OR PHONE MELT DOWN. YOUR WARRANTY OF COURSE,
WOULD BE NULL AND VOID.
Operating a motor vehicle
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY LEAD TO SERIOUS
PERSONAL INJURY AND PROPERTY DAMAGE.
You should never use a hand-held phone while operating a motor vehicle. It
may divert your attention away from driving and may be illegal in some cities,
states, and jurisdictions. You should park your vehicle legally before using
your hand-held phone. Remember, safety comes first.
•
Your hand-held phone should be stored in a secure place so that, in the
event of a sudden stop or collision with another vehicle, the phone will
not damage property or injure anyone. For example, airbags inflate very
quickly and with great force. Serious injury may result if you have placed
your phone in the area of deployment of an air bag and the bag inflates.
Park your vehicle legally before using your hand-held phone.
•
•
Call to report serious emergencies. No charges from your carrier.
Use your phone to help others in emergencies.
131
•
Call roadside assistance or a secret non-wireless number when
necessary.
Following safety guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger. All wireless phones
may be subject to radio interference, which may affect their performance.
Turning off your phone in dangerous
areas
To avoid interfering with blasting operations, turn off your phone when in a
blasting area or in other areas with signs indicating that two-way radios should
be turned off. Construction crews often use remote-control RF devices to set off
explosives.
Turn off your phone when you’re in any area that has a potentially explosive
atmosphere. Although it’s rare, your phone or its accessories could generate
sparks. Sparks could cause an explosion or a fire resulting in bodily injury or
even death. These areas are often, but not always, clearly marked. They
include:
•
•
•
•
Fueling areas such as gas stations
Below deck on boats
Fuel or chemical transfer or storage facilities
Areas where the air contains chemicals or particles such as grain, dust or
metal powders
•
Any other area where you would normally be advised to turn off your
vehicle engine
132
Restricting children’s access to your
phone
Your Samsung phone is not a toy. Children should not be allowed to play with it
because they could hurt themselves and others, damage the phone or make
calls that increase your phone bill.
Turning off your phone before flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation Administration
(FAA) regulations require you to have permission from a crew member to use
your phone while the plane is on the ground. To prevent any risk of
interference, FCC regulations prohibit using your phone while the plane is in
the air.
Maintaining your phone’s peak
performance
To operate your phone properly — that is, to maintain safe and satisfactory
service — you should follow these rules:
•
•
•
•
•
•
•
For best reception, extend the antenna fully.
Hold the phone with the antenna up and over your shoulder.
Do not hold, bend, or twist the phone antenna at any time.
Close the phone antenna when not on a call.
Do not use the phone with a damaged antenna.
Speak directly into the microphone.
Avoid exposing your phone and accessories to rain or liquid. If your
phone does get wet, immediately turn the power off and remove the
battery.
•
Only Samsung authorized personnel should service your phone and
accessories.
133
Using your phone near other electronic
devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, some electronic equipment may not be shielded, or
adequately shielded, from RF signals. RF signals from wireless telephones may
affect such equipment.
RF signals from your phone may affect systems in your vehicle, including
improperly installed or inadequately shielded electronic operating and
entertainment systems in motor vehicles (such as electronic ignition systems,
electronic speed control systems, electronic anti-skid or anti-lock braking
systems, and air bag systems). You should check with the manufacturer of your
vehicle (and the manufacturers of any equipment added to your vehicle) to
determine whether its systems are adequately shielded from external RF signals
and to determine appropriate safety precautions.
You must consult the manufacturer of any personal medical devices (such as
pacemakers and hearing aids) to determine if they are adequately shielded
from external RF signals and the appropriate safety precautions to take with
such devices. For example, safety instructions for pacemakers may include
minimum distances that the phone should be kept from the pacemaker, areas
where the phone should not be kept (for example, the breast pocket), use of
the ear opposite the pacemaker, and other such safety instructions. The advice
from the manufacturers may change from time to time. If at any time you
suspect any such interference, turn off your phone immediately.
Turn off the phone in health care facilities and request permission before using
the phone near medical equipment.
Storing your phone
You must not store or carry your phone, its parts, or accessories in the same
compartment or other area where there flammable liquids, gases, or explosive
or flammable materials.
134
Your phone as a network device
Your telephone requires a service provider in order to send and receive calls.
Your phone is only one part of a system or “network” of devices, that makes it
possible to send and receive calls, text messages, voice message, access the
Internet using the MiniBrowser, and to take advantage of all of the other
services and features provided to you and your phone.
Your phone will always try your call using your home system, but if this is
unavailable, then the phone will use the preferred roaming system.
If you cannot roam, your call will not be connected, and in some service areas,
an operator may ask you how you would like to pay for the call.
To make all of the features available to you, your phone is designed by
Samsung and your service provider to allow your service provider to send (at
any time) a variety or information and messages to your phone. You may think
of this as an over the air service to your phone. During an over-the-air
programming session, your phone may display the following messages:
•
“Programming in progress...” - this message means the phone is
downloading data. Do not turn your phone off while this is occurring.
See the CAUTION: below.
•
“Programming successful!...” - if this message displays after a series
of other messages, then it means that your phone has been successfully
reprogrammed. You can now continue to use your phone as you
normally do.
•
“Programming unsuccessful!” - if this message appears contact your
service provider.
CAUTION: If you turn off your phone during a programming session, your
phone (or some features) may not work properly in the network. If this
happens don’t worry, contact your service provider for help in correcting the
problem.
135
Acknowledging special
precautions and the FCC and
Industry Canada Notice
Information to user
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient / Relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.
136
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment and void your authority
to operate this equipment.
Only used approved batteries, antennas, and adaptors. The use of any
unauthorized accessories may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of hardware and can
be broken. Use common-sense guidelines to avoid dropping, hitting, bending
or sitting on it.
FCC compliance information
This device complies with part 15 of the FCC Rules. Operation and is subject to
the condition that this device does not cause harmful interference.
Owner's record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about your
phone in the future.
Model:
Serial No.:
137
Samsung phone/battery specifications
Dual Band:
CDMA 1.9GHz / CDMA 800 MHz/AMPS 800 MHz
Graphical LCD up to 6 lines w/1 dedicated Icons Line)
Standard: Lithium-Ion
Display Screen:
Battery Type:
PCS Antenna:
Retractable, user-replaceable
Samsung phone with standard battery
Dimensions (H x W x D:) 4.5 x 2.0 x 0.8 inches or 116 x 52 x 21 mm
Weight:
4.2 oz. (120 g)
107 cc
Volume:
Talk Time Digital:
Standby Time Digital:
Analog:
Up to 2.8 hours
Up to 140 hours
15 hours
Sony Corp. TYPE BST0369DE, Rated 3.7V 900mAH LI-ion
Samsung phone with extended battery
Dimensions (H x W x D:) 4.5 x 2.0 x 1.0 inches or 116 x 52 x 24.5 mm
Weight:
4.4 oz. (125 g)
112 cc
Volume:
Talk Time Digital:
Analog:
Up to 3.9 hours
Up to 1.6 hours
Up to 200 hours
23 hours
Standby Time Digital:
Analog:
Sony Corp. TYPE BEX036DDE, Rated 3.7V 1300mAH LI-ion
138
User guide proprietary notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more
of the following Patents:
4,901,3075,109,3905,267,2625,416,797
5,506,8655,544,1965,657,4205,101,501
5,267,2615,414,7965,504,7735,535,239
5,600,7545,778,338 5,228,054 5,337,338
5,710,7845,056,109 5,568,4835,659,569
5,490,1655,511,073
®
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
Licensed by Qualcomm Incorporated under one or more of the following
patents: U.S. Patent No. 4,901,307; 5,056,109; 5,099,204; 5,101,501;
5,103,459; 5,107,225; 5,109,390.
Phone.com® is a registered Trademark of Phone.com, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
Yahoo!® and My Yahoo!® are registered Trademarks of Yahoo! Inc.
WindowsWindows 95®CE devices, Windows 95®, Windows®98 and
WindowsNT® Windows ME® Windows 2000®are registered Trademarks of
Microsoft® Corporation.
Samsung Uproar and logo are trademarks of Samsung Electronics
Corporation, Ltd.
Apple® and Macintosh® are registered trademarks Apple Corporation
®
Amazon.com®
eCompare!™
The Weather Channel® America Online
®
Fidelity Investments
Fox Sports.com™
139
FDA consumer update
Copied verbatim from: The U.S. Food and Drug Administration’s
Center for Devices and Radiological Health Consumer Update on
Mobile Phones
FDA has been receiving inquiries about the safety of mobile phones, including
cellular phones and PCS phones. The following summarizes what is known -
and what remains unknown - about whether these products can pose a hazard
to health, and what can be done to minimize any potential risk. This
information may be used to respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency energy (i.e., radio frequency
radiation) in the microwave range while being used. They also emit very low
levels of radio frequency energy (RF), considered non-significant, when in the
standby mode. It is well known that high levels of RF can produce biological
damage through heating effects (this is how your microwave oven is able to
cook food). However, it is not known whether, to what extent, or through what
mechanism, lower levels of RF might cause adverse health effects as well.
Although some research has been done to address these questions, no clear
picture of the biological effects of this type of radiation has emerged to date.
Thus, the available science does not allow us to conclude that mobile phones
are absolutely safe, or that they are unsafe. However, the available scientific
evidence does not demonstrate any adverse health effects associated with the
use of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones, the kind that have
a built-in antenna that is positioned close to the user’s head during normal
telephone conversation. These types of mobile phones are of concern because
of the short distance between the phone’s antenna - the primary source of the
RF - and the person’s head. The exposure to RF from mobile phones in which
140
the antenna is located at greater distances from the user (on the outside of a
car, for example) is drastically lower than that from hand-held phones,
because a person’s RF exposure decreases rapidly with distance from the
source. The safety of so-called “cordless phones,” which have a base unit
connected to the telephone wiring in a house and which operate at far lower
power levels and frequencies, has not been questioned.
How much evidence is there that hand-held mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either way; however,
research efforts are on-going. The existing scientific evidence is conflicting and
many of the studies that have been done to date have suffered from flaws in
their research methods. Animal experiments investigating the effects of RF
exposures characteristic of mobile phones have yielded conflicting results. A
few animal studies, however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory animals. In one study, mice
genetically altered to be predisposed to developing one type of cancer
developed more than twice as many such cancers when they were exposed to
RF energy compared to controls. There is much uncertainty among scientists
about whether results obtained from animal studies apply to the use of mobile
phones. First, it is uncertain how to apply the results obtained in rats and mice
to humans. Second, many of the studies that showed increased tumor
development used animals that had already been treated with cancer-causing
chemicals, and other studies exposed the animals to the RF virtually
continuously - up to 22 hours per day.
141
For the past five years in the United States, the mobile phone industry has
supported research into the safety of mobile phones. This research has
resulted in two findings in particular that merit additional study:
1. In a hospital-based, case-control study, researchers looked for an
association between mobile phone use and either glioma (a type of brain
cancer) or acoustic neuroma (a benign tumor of the nerve sheath). No
statistically significant association was found between mobile phone use
and acoustic neuroma. There was also no association between mobile
phone use and gliomas when all types of types of gliomas were
considered together. It should be noted that the average length of mobile
phone exposure in this study was less than three years.
When 20 types of gliomas were considered separately, however, an
association was found between mobile phone use and one rare type of
glioma, neuroepithelliomatous tumors. It is possible with multiple
comparisons of the same sample that this association occurred by
chance. Moreover, the risk did not increase with how often the mobile
phone was used, or the length of the calls. In fact, the risk actually
decreased with cumulative hours of mobile phone use. Most cancer
causing agents increase risk with increased exposure. An ongoing study
of brain cancers by the National Cancer Institute is expected to bear on
the accuracy and repeatability of these results.1
2. Researchers conducted a large battery of tests to assess the effects of
exposure to mobile phone RF on genetic material. These included tests
for several kinds of abnormalities, including mutations, chromosomal
aberrations, DNA strand breaks, and structural changes in the genetic
material of blood cells called lymphocytes. None of the tests showed any
effect of the RF except for the micronucleus assay, which detects phone
1.Muscat et al. Epidemiological Study of Cellular Telephone Use and Malignant Brain
Tumors. In: State of the Science Symposium; 1999 June 20; Long Beach, California.
142
radiation, but only after 24 hours of exposure. It is possible that exposing
the test cells to radiation for this long resulted in heating. Since this assay
is known to be sensitive to heating, heat alone could have caused the
abnormalities to occur. The data already in the literature on the response
of the micronucleus assay to RF are conflicting. Thus, follow-up research
is necessary.1
Two other studies of interest have been reported recently in the
literature:
1. Two groups of 18 people were exposed to simulated mobile phone
signals under laboratory conditions while they performed cognitive
function tests. There were no changes in the subjects’ ability to recall
words, numbers, or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test when they were
exposed to simulated mobile phone signals. This was the only change
noted among more than 20 variables compared.2
2. In a study of 209 brain tumor cases and 425 matched controls, there was
no increased risk of brain tumors associated with mobile phone use.
When tumors did exist in certain locations, however, they were more
likely to be on the side of the head where the mobile phone was used.
Because this occurred in only a small number of cases, the increased
likelihood was too small to be statistically significant.3
In summary, we do not have enough information at this point to assure
the public that there are, or are not, any low incident health problems
1.Tice et al. Tests of mobile phone signals for activity in genotoxicity and other labora-
tory assys. In: Annual Meeting of the Environmental Mutagen Society; March 29, 1999,
Washington, D.C.: and personal communication, unpublished results.
2.W, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and Varey, A. Effect of a 915-
MHz simulated mobile phone signal on cognative function in man. Int. J. Radiat. Biol.,
April 8, 1999.
3.Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of cellular tele-
phones and the risk for brain tumors: a case-control study, Int. J. Oncol., 15: 113-116,
1999.
143
associated with use of mobile phones. FDA continues to work with all
parties, including other federal agencies and industry, to assure that
research is undertaken to provide the necessary answers to the
outstanding questions about the safety of mobile phones.
What is known about cases of human cancer that have been reported
in users of hand-held mobile phones?
Some people who have used mobile phones have been diagnosed with brain
cancer. But it is important to understand that this type of cancer also occurs
among people who have not used mobile phones. In fact, brain cancer occurs
in the U.S. population at a rate of about 6 new cases per 100,000 people each
year. At that rate, assuming 80 million users of mobile phones (a number
increasing at a rate of about 1 million per month), about 4800 cases of brain
cancer would be expected each year among those 80 million people, whether
or not they used their phones. Thus it is not possible to tell whether any
individual’s cancer arose because of the phone, or whether it would have
happened anyway. A key question is whether the risk of getting a particular
form of cancer is greater among people who use mobile phones then among
the rest of the population. One way to answer the question is to compare the
usage of mobile phones among people with brain cancer with the use of
mobile phones among appropriately matched people without brain cancer.
This is called a case-control study. The current case-control study of brain
cancers by the National Cancer Institute, as well as the follow-up research to be
sponsored by industry, will begin to generate this type of information.
What is FDA’s role concerning the safety of mobile phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as mobile phones before marketing, as it does with new drugs
or medical devices. However, the agency has authority to take action if mobile
phones are shown to emit radiation at a level that is hazardous to the user. In
such a case, FDA could require the manufacturers of mobile phones to notify
144
users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions at this
time, FDA has urged the mobile phone industry to take a number of steps to
assure public safety. The agency has recommended that the industry.
•
•
•
support needed research into possible biological effects of RF of the type
emitted by mobile phones.
design mobile phones in a way that minimizes any RF exposure to the
user that is not necessary for device function; and
cooperate in providing mobile phone users with the best possible
information on what is known about possible effects of mobile phone use
on human health.
At the same time, FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of mobile phone safety to
ensure a coordinated effort at the federal level. These agencies are:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Health and Safety Administration
National Telecommunications and Information Administration
The National Institutes of Health also participates in this group.
In the absence of conclusive information about any possible risk,
what can concerned individuals do?
If there is a risk from these products - and at this point we do not know that
there is - it is probably very small. But if people are concerned about avoiding
even potential risks, there are simple steps they can take to do so. For example,
time is a key factor in how much exposure a person receives. Those persons
who spend long periods of time on their hand-held mobile phones could
consider holding lengthy conversations on conventional phones and reserving
145
the hand-held models for shorter conversations or for situations when other
types of phones are not available.
People who must conduct extended conversations in their cars every day could
switch to a type of mobile phone that places more distance between their
bodies and the source of the RF, since the exposure level drops off dramatically
with distance. For example, they could switch to:
•
•
a mobile phone in which the antenna is located outside the vehicle,
a hand-held phone with a built-in antenna connected to a different
antenna mounted on the outside of the car or built into a separate
package, or
•
a headset with a remote antenna to a mobile phone carried at the waist.
Again, the scientific data do not demonstrate that mobile phones are harmful.
But if people are concerned about the radio frequency energy from these
products, taking the simple precautions outlined above can reduce any
possible risk.Where can I find additional information?
For additional information, see the following web sites:
Federal Communications Commission (FCC) RF Safety Program (select
“Information on Human Exposure to RF Fields from Cellular and PCS Radio
Transmitters”): http://www.fcc/gov/oet/rfsafety
World Health Organization (WHO) International Commission on Non-
Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf
United Kingdom, National Radiological Protection Board:
http://www.nrpb.org.uk
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S. Food and Drug Administration (FDA) Center for Devices and
Radiological Health: http://www.fda.gov/cdrh/consumer/
146
INDEX
Symbols
#911 115, 117
*911 115, 117
Numerics
0 / next key 65
911 115, 117, 118
A
Accessing menus by scrolling 24
Accessing menus using short cut number 25
Accessories 124, 126
Adaptor outlet 18
Adding a name ringer 57
Adding an e-mail address 50
Adjusting ringer volume 74
Adjusting voice volume 74
Air time 40
Alarm 73
Alerts 77
Alerts — Service 78
Alphabetical text entry 102
Answer mode 92
Answering a call 43
Antenna 15
Asterisk / shift key 65
Auto answer 91
Auto retry 91
B
Backlight features 15
Battery indicator 33
Browser MSG 111
C
Call activity 39
147
Calls - Incoming 36
Calls - Missed 37
Calls - Outgoing 36
Car 124
Car adaptor 124
Caring for the battery 34
Clear MEM 119
CLR (Clear) key 15, 65
Connect 78
Countdown 70
Creating SMS Text Messages 100, 101
D
Data / fax 76, 95
Data cable 124
Delivery acknowledgement 107
Desktop adaptor 124
Dialing in Lock Mode 116
Dialing numbers from the phone book 60
Dialing special numbers in lock mode 118
Disconnect 78
Display screen 15
Disposal of Lithium Ion (Lilon) batteries 34
E
Editing phone book numbers 54
E-mail 31
Empty battery icon 33
End (power on/off key) 16
END key 65
Ending a fax or data call 97
Entering numbers 102
Entering text, numbers, or symbols 19, 66
Erase logs 37
Erase message 109
Erase total 43
148
F
Fade 78
Fax 31
Filed message 108
Find entry 49
Find name 47
Flying tight 88
Front flip 16
Front view of the Samsung N150 14
G
Games 88
Getting service 19
Getting to know your phone 15
Green 35
H
Hands-free headset 124
Hands-free car kit 124
Holster 124
Home 31
I
Inbox 105
Individual sub menus and features 21
Input modes 26
Installing the battery 32
K
Key beep 77
Key Commands 90
L
Last call 40
LCD Contrast 84
Leather case 124
LED indicator 17
LifeTime 41
149
Lifetime 43
Links 66
List 21
List of main and sub menus 21
List of menu functions 21
Lock Code Setting 117
Lock Mode 115
Lock mode 26
Locking the Phone 116
Locking the phone 115
M
Mail kit 99
Mail kit - Erasing individual messages 106
Mail kit - Message memory capacity 106
Mail kit - Message options 114
Mail kit - Message ringing 105
Mail kit - Messages and lock mode 107
Main menu structure 21
Making a phone call while using the minibrowser 66
Manual pause dialing 53
MENU key 65
Menu key 17
Message opened 31
Message received 31
Message setup 109
Microphone 17
Minibrowser - exiting 63
Minibrowser - launching 62
Mobile 31
Mobile Originating (MO) SMS Text Messaging 99
N
Navigation key 64
No label 31
Numbered keys 65
Numbered keys 0 65
150
Numbered keys 1 - 9 65
Numeric mode 102
O
Office 31
OK/Message key 17
One-touch dialing 60
Orange 35
Outbox 105
Outgoing 36
Owner’s record 131
P
Page 110
Pager 31
Pause dialing 52
Phone Book 43
Phone’s modes 26
Pound / space key 65
Prepending a phone humber 55
Privacy 79
Protecting your battery 34
R
Receiver 17
Receiving a fax 96
Red 35
Relation search 49
Removing the battery 32
reset the security key 62
Responding to a Message 104
Returning to the previous menu 24
Reviewing 105
Reviewing Airtime 40
Reviewing outbox 105
Ringer options 74
Ringer type 75
151
Roam 79
Roam ringer 80
Run for money 89
S
Schedule 76
Scheduler 67
Scroll Timer 109
Security 115
Security - Dialing in lock mode 116
Security - Emergency 117
Security - Lock code 117
Security - Lock mode 115
Security - Locking the phone 116
Security - Resetting your phone 120
Security - Restrict 116
Security - Unlocking the phone 116
Security key 62
Send key 17
Send PIN 119
Send/Talk mode 28
Sending a fax or data file 97
Sending messages 104
Set 98
Set NAM 93
Set network 98
Set system 94
Set Time 83
Setting speed dial 58
Software/Hardware Version 84
Speed dial 31
Standard, and Extended-life batteries 124
Standby mode 28
Storing numbers 118
Storing pauses in a phone book 52
Storing phone numbers at the end of a call 59
152
Symbol entry 102
Symbol mode 102
T
T9® Word 103
Text 110
Tips on recording names 85
Toggle 18
Tone length 92
Total air time 41
Travel adaptor 35, 124
Turning your phone off 19
Turning your phone on 19
Two-touch dialing 60
U
Usage guidelines 122
Using your phone’s menus 24
V
Viewing call logs 39
Voice dial 85
Voice dial - Language 88
Voice dial - Record 85
Voice dial - Set active 87
Voice dial - Training 88
Voice mail 110
Voice privacy 31, 120
Voice volume 79
W
Web alert 109
Web/MiniBrowser 61
Y
Yellow arrow 18
Your consumer package 13
153
154
|