Samsung Messager SCH r450 User Manual

Samsung Messager™  
( S C H - r 4 5 0  
P O R T A B L E  
M O B I L E  
S e r i e s )  
T R I - B A N D  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
Printed in Korea.  
Licensed by Qualcomm Incorporated under one or more of the following patents:  
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.  
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and  
other patents pending.  
®
VoiceSignal and the VoiceSignal logo are registered Trademarks of VoiceSignal Technologies, Inc.  
®
Openwave is a registered Trademark of Openwave, Inc.  
®
The Bluetooth word mark, figure mark (stylized "B Design"), and combination mark (Bluetooth word mark and "B Design") are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
1
2
Section 1: Getting Started  
This section explains how to start using your SCH-r450 phone by  
activating your service, setting up your Voicemail, or getting an  
understanding of how this manual is put together.  
Text Conventions  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
appear in place of repeatedly-used procedural steps:  
Understanding this User Manual  
The chapters of this guide generally follow the same order as the  
menus and sub-menus in your phone. A robust index for quick  
reference to most features begins on page 141.  
OK  
highlight UsetheNavigationkey(  
)tomoveahighlighting  
effect onto a menu item or screen item of interest.  
select  
After “highlighting” a menu item or screen item,  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page 118.  
OK  
press the OK key  
to launch, access, or save a  
highlighted menu item or screen field of interest.  
Used in place of “select” in long “drill down”  
procedure steps.  
Notes and Tips  
Throughout this guide there is text that is set apart from the rest.  
These are intended to point out important information, quick  
methods for activating features, to define terms, and more. The  
definitions for these methods are as follows:  
Example: “...Settings  
Call Settings  
Call Answer...”  
Installing the Battery  
Notes: Explain alternative options within the current feature, menu, or  
sub-menu.  
Note: Your phone comes packaged with a partially charged rechargeable  
standard Li-Ion battery and travel adapter.  
Tips: Provide quick or innovative methods for performing functions  
related to the subject at hand.  
Important: Points out important information about the current feature  
that could affect performance, or even damage your phone.  
Important!: You must fully charge the battery the first time you use your  
phone, otherwise you could damage the battery.  
Getting Started  
4
                   
1. Insert the top end of the  
battery first, matching the  
gold contacts on the inside  
of the battery to those on the  
phone.  
2. Press down on the battery  
cover release latch (1) and lift  
the cover (2) up at the top  
and away from the phone.  
2. Press lightly on the bottom end of the battery down into  
the phone until it slips into place.  
3. Lift the battery (3) up and  
away from the phone,  
bottom end first.  
3. Press lightly down and  
4
3
inward on the bottom of the  
battery cover.  
Charging the Battery  
4. Press lightly on the top end  
3
Your phone is powered by a rechargeable standard Li-Ion battery.  
Only use Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Use  
of other accessories may invalidate your warranty and may  
cause damage.  
of the battery cover, down  
over the battery, until it  
clicks into place.  
Remove the Battery  
1. Press and hold the  
key to turn off the phone (if on).  
5
       
Use the Travel Adapter  
Low battery indicator  
The travel adapter included  
with your phone is a  
convenient, light-weight  
charger that rapidly charges  
your phone from any 120/220  
VAC outlet.  
The battery indicator (  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
) in the upper-right corner of the  
Three bars (  
) indicate a full charge.  
An empty battery icon (  
) indicates a near empty battery.  
A blinking empty battery icon (  
) and a tone sounding indicate you  
1. Plug the large end of the Travel Adapter into a standard  
have two to three minutes before the battery is too low to operate the  
phone.  
120 VAC or 220 VAC wall outlet.  
If you continue to use your phone without charging its battery, the  
phone will shut down.  
Important!: For connection to an electrical supply not located in North  
America, you must use an adaptor of the proper configuration for  
the power outlet. Use of the wrong adapter could damage your  
phone and void your warranty.  
Activating Your Phone  
Contact your Wireless Carrier and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
2. Insert the smaller end of  
the Travel Adapter into the  
Turning Your Phone On  
charger/accessory  
+
1. With the phone closed, press and hold the  
key until  
Incorrect  
connector at the bottom  
the display lights.  
end of your phone.  
Note: As with any other radio-transmitting device, do not touch the antenna  
while using your phone as this can affect call quality and can cause the  
phone to operate at a higher power level than is necessary.  
Important!: You must unplug the adapter before removing the battery from  
the phone during charging to avoid damage.  
2. The phone begins searching for a network signal.  
Getting Started  
6
       
3. Once the phone finds a signal, the time, date, and day  
2. Follow the prompts in the new user tutorial to setup your  
appear near the top of the display.  
mail box.  
4. You’re now ready to place and receive calls.  
Listen to Voicemail  
1. In standby mode, press and hold the  
key or dial your  
Note: If you are outside of your carrier’s coverage or roaming area, the No  
Service icon (  
) appears at the top of the phone’s display. If you  
own mobile number to dial Voicemail. After connecting,  
you will hear your voice greeting.  
cannot place or receive calls, try later when service is available, or at  
another location.  
2. You are prompted to enter your password.  
Turn Your Phone Off  
Memory Card (Optional)  
With the phone closed, press and hold the  
two or more seconds. Your phone powers off.  
key for  
Your phone has a Memory Card slot on its right side, behind the  
battery cover. You can install a microSD™ card to provide  
additional memory for storing files (such as, sound files and  
photos) in your phone.  
Note: If your phone is on and you press  
for less than one second, the  
phone will not power off. This prevents your phone from being turned  
off accidentally.  
Install a Memory Card  
Setting Up Your Voicemail  
1. Open the battery cover from the back of your phone. (For  
more information, refer to Step 2 of “Remove the Battery”  
Voicemail allows callers to leave voice messages, which can be  
retrieved any time.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Message menu) to view details of voice  
messages in your Voicemail box.  
1. In standby mode, press and hold the  
key or dial your  
own mobile number to dial Voicemail.  
7
           
2. Insert the memory card — label side facing up and smaller  
end pointing toward the phone — into the memory card  
slot.  
2. Press the memory card into the slot until the card lock  
releases.  
3. Remove the memory card from the memory card slot.  
4. If desired, install another memory card. (For more  
5. Replace the battery cover.  
3. Press the memory card into the slot until the card locks  
into place.  
4. Replace the battery cover.  
Remove a Memory Card  
1. Open the battery cover from the back of your phone. (For  
more information, refer to Step 2 of “Remove the Battery”  
Getting Started  
8
 
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also  
describes the screen format and the icons that will be displayed  
when the phone is in use.  
Closed View of Your Phone  
Features of Your Phone  
Domestic and international voice and text messaging service (available  
on participating networks).  
High speed data (CDMA 2000 1x Technology)  
®
Bluetooth Wireless Technology (see Note)  
Global Positioning (GPS) Technology  
PIM Functions  
Picture (MMS) Messaging  
Text (SMS) Messaging  
E-mail Messaging  
QWERTY Keypad  
Built-in 1.3 Megapixel Digital Camera  
Voice Dial  
Features  
1. Volume Key — Lets you adjust the ring volume in standby  
mode, adjust the voice volume during a call, or mute the  
ringer during an incoming call.  
Speakerphone  
Note: The SCH-r450 supports the wireless handsfree profile and OBEX  
profiles for Bluetooth® wireless technology. The SCH-r450 does not  
support the Bluetooth serial port profile.  
9
           
2. Left Soft Key — Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom left corner of the Main LCD.  
10. Voicemail Key — Lets you speed dial your Voicemail  
account to review your voice messages.  
11. Special Function Keys — Enter special characters.  
3. Speakerphone Key — Lets you enable/disable  
Performs various functions.  
speakerphone mode.  
12. Microphone — Lets the other party to a call hear you  
4. SEND Key — Lets you place or receive a call. In standby  
clearly when you are speaking to them.  
mode, press the key once to access the recent call log.  
13. Power/Accessory Connector — Used to plug in charging  
accessories and to connect a headset or any available  
accessory cables to your phone.  
5. Alpha-numeric Keys — Use these keys to enter  
numbers, letters, and characters.  
6. Earpiece / Speaker — Lets you hear ringing and alert  
14. Right Soft Key — Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom right corner of the Main Display.  
tones, alarm tones, and the other parties to calls.  
7. Display — Indicates the status of your phone, including  
numbers dialed, feature and function screens, status  
icons, message indicators, signal strength, and so on.  
15. CLR Key — Deletes characters from the display when you  
are in text entry mode. Press this key to return to the  
previous menu or screen when navigating features on your  
phone.  
8. OK Key — In standby mode, launces the Main Menu.  
Pressing when navigating through a menu accepts the  
highlighted choice in a menu.  
16. END Key — Ends a call. If you press and hold the END key,  
the power goes On or Off. When you receive an incoming  
call, press to send the call to voicemail.  
9. Navigation Key — In Menu mode, lets you scroll through  
the phone menu options. In Standby mode, lets you access  
preset functions.  
Understanding Your Phone  
10  
17. Camera / Music Player Key — Launches the Camera or  
Features  
the Music Player feature of your phone.  
1. Earpiece / Speaker — Lets you hear ringing and alert  
tones, alarm tones, and the other parties to calls.  
18. Voice Recognition Key — In standby mode, pressing and  
holding this key launches VoiceSignal options.  
2. Display — Indicates the status of your phone, including  
numbers dialed, feature and function screens, status  
icons, message indicators, signal strength, and so on.  
Open View (Front) of Your Phone  
3. soft1 Key — Left soft key — Used to navigate through  
menus and applications and to select the choice indicated  
at the bottom left corner of the Main LCD.  
4. shift Key — Toggles ABC mode capitalization between  
ABC, Abc, and abc.  
5. Messaging Key — Launches the Messages menu.  
6. Fn Key — Text Function Key — Toggles text entry mode  
between ABC and 123 modes.  
7. space Key — Inserts a space character in a text entry.  
8. Arrow (Navigation) Keys — In Menu mode, lets you  
scroll through the phone menu options. In Standby mode,  
lets you access preset functions and one user-defined  
function.  
11  
   
9. soft2 Key — Right soft key — Used to navigate through  
menus and applications and to select the choice indicated  
at the bottom right corner of the Main Display.  
Closed Rear View of Your Phone  
10. OK Key — In standby mode, launces the Main Menu.  
When navigating through a menu accepts the highlighted  
choice in a menu.  
11. Back / Clear Key — Deletes characters from the display  
when you are in text entry mode. Press this key to return to  
the previous menu or screen when navigating features on  
your phone.  
12. Speakerphone Key — Lets you enable/disable  
speakerphone mode.  
13. SEND Key — Lets you place or receive a call. In standby  
mode, press the key once to access the recent call log.  
14. END Key — Ends a call. If you press and hold the END key,  
the power goes On or Off. When you receive an incoming  
call, press to send the call to voicemail.  
1. Headset Connector — Used to connect a headset or TTY  
2. Speaker Grill — Lets you hear ringing and alert tones,  
alarm tones, and the other parties to calls.  
Understanding Your Phone  
12  
 
3. Camera Lens — The lens of your built-in camera.  
When the Left soft key function is Edit, press the Edit (left) soft key  
or ) to edit a Contact.  
(
4. Mirror — Lets you position the Camera Lens to take self  
Right Soft Key  
portraits.  
Some functions of the Right soft key are as follows.  
5. Camera / Music Player Key — Launches the Camera or  
In standby mode, press the @metro (Right) soft key (  
launch the @metro screen.  
When the Right soft key function is Options, press the Options (right)  
soft key ( or ) and a pop-up menu appears.  
When the Right soft key function is Back, press the Back (right) soft  
or  
) to  
the Music Player feature of your phone.  
6. Battery Cover — Lets you access your phone’s battery.  
7. Volume Key — Lets you adjust the ring volume in standby  
mode, adjust the voice volume during a call, or mute the  
ringer during an incoming call.  
key (  
or  
) to back up one menu level.  
OK Key  
8. Battery Cover Release Latch — Lets you remove the battery  
OK  
In standby mode, press the OK key ( or  
Menu.  
) to launch the Main  
cover.  
OK  
In a menu, press the OK key ( or  
selection.  
) to accept the highlighted  
Command Keys  
Functions for the soft keys are defined by what appears above  
each in the display. There are two soft keys, the Left soft key  
OK  
In camera mode, press the Take key ( or  
create a Picture message.  
) to take a photo or to  
(
or  
) and the Right soft key (  
or  
).  
OK  
When the OK key function is Edit, press the Edit key ( or  
) to  
Left Soft Key  
edit a Draft message.  
Some functions of the Left soft key are as follows:  
In standby mode, press the Contacts (left) soft key (  
or  
) to  
show the Contacts Find screen.  
13  
         
Speakerphone Key  
Enter a number and briefly press  
Briefly press in standby mode to display a list of recent calls to  
and from your phone.  
to make a call.  
The Speakerphone key ( ) is used to place your phone in  
Speakerphone mode, allowing you to use your phone handsfree  
and/or to share a call with others, such as in an office or  
conference room  
Press  
Press  
twice in standby mode to call the most recent number.  
to pick up a waiting call. Press  
again to switch back  
to the other call.  
Clear Key  
Navigation Key  
The  
numbers, text, or symbols from the display. You can also use the  
or key to return to a previous menu.  
C/Back Arrow key ( or  
) is used to erase or clear  
OK  
Use the directional keys on the Navigation key  
to browse  
menus, sub-menus, and lists. Each directional key also acts as a  
shortcut to launch applications. (For more information, refer to  
If you enter an incorrect character, briefly press  
backspace (and delete) the character.  
or  
to  
To erase the entire sentence, press and hold  
or  
.
Camera / Music Player Key  
To back up one menu level, briefly press  
or  
.
Use the Camera/Music Player key (  
) on the right side of  
End Key  
the phone to activate the camera built into your phone and to  
take pictures, and to activate the Music Player built into your  
phone to play music files loaded onto an optional microSD™  
Memory Card.  
Press and hold the End key  
to turn on your phone.  
once to disconnect a call.  
to return to standby mode from any menu, or to cancel the  
Briefly press  
Press  
last input.  
Send Key  
The Send key  
recall the last number(s) dialed, received, or missed.  
Press once to answer calls.  
is used to answer calls, dial calls, and to  
Understanding Your Phone  
14  
         
With the QWERTY  
keypad open, the  
display rotates  
automatically  
from portrait  
mode (as shown  
above) to  
Understanding the Display Screen  
1
2
1. The top line of your  
phone’s display contains  
icons that indicate  
network status, battery  
power, signal strength,  
connection type, and  
more.  
1
2
landscape mode  
(as shown here).  
3
3
2. The center portion of the  
Display Screen Icons  
display shows  
Your SCH-r450 phone can show you definitions of the icons that  
appear on the top line of the display.  
information such as call progress information, messages,  
and photos.  
To access the Icon Glossary:  
3. The bottom line of the display shows current soft key  
OK  
In standby mode, press the Menu key ( ), then press  
functions. The sample screen shows that pressing the Left  
(for Settings),  
(for Phone Info), and  
soft key (  
or  
) will display the Contacts Find screen  
for Icon Glossary. A list appears showing all of  
and pressing the Right soft key (  
or  
) will launch  
the icons that can appear on the top line of the display.  
@metro.  
Dialogue Boxes  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Dialogue boxes and their  
definitions are outlined below.  
15  
     
Choice  
Reconfirm  
Your Phone’s Modes  
Call Answer Mode  
Example: “Save Message?”  
You can choose to answer a call by pressing any key except the  
Example: “Erase All Messages?”  
key or  
key, by pressing only the  
key, or by  
Performing  
Example: “Sending...” “Connecting...”  
Completed  
Input mode  
Example: “Message Saved”  
Information  
Error  
Input mode determines how you enter text, numbers, and  
symbols. While at any text entry screen, press the Left soft key  
Example: “New Message”  
(
or  
), then choose the input mode from the pop-up  
menu using the Navigation key. Optional input modes are T9  
Word, Abc, ABC, Symbol, and 123. (For more information, refer  
Example: “System Error!”  
Warning  
Example: “Low Battery,” “Memory Full!”  
Backlights  
Note: With the QWERTY keypad open, T9 Word and Symbol input modes are  
not available. Use 123 mode instead of Symbol to enter symbols and  
punctuation in your text.  
Backlights illuminate the display and the keypad. When you press  
any key or open the phone, the backlights come on. They go off  
when no keys are pressed within a period of time set in the  
Backlight menu.  
Tip: With the phone closed, you can also cycle between T9 Word, Abc, and  
123 by pressing and holding the  
each cycle.  
key until the phone beeps, for  
Note: During a phone call, the display backlight dims after 10 seconds and  
turns off after 30 seconds to conserve battery power, regardless of the  
Backlight setting.  
Understanding Your Phone  
16  
         
Receive Messages in Standby Mode  
Lock Mode  
When the phone is in Lock Mode, restrictions are placed on  
phone use. You can receive calls and messages, but cannot place  
outgoing calls (except for emergency numbers) until you unlock  
the phone. Lock Mode also restricts access to menus and the  
volume key. Unlock your phone by entering the lock code when  
You can receive messages in standby mode. An alert tone sounds  
and a notification message appears in the display when a new  
message arrives. The following call message options appear:  
View Now — This selection allows you to view the messages  
now.  
View Later — This selection allows you to view the messages at a  
later date.  
OK  
Highlight the desired viewing option and then press  
.
Standby Mode  
Talk Mode  
Standby mode is the state of the phone once it has found service  
and is idle. The phone goes into standby mode:  
You can place and receive calls only when your phone is on.  
While in a call your phone is in talk mode. Press the Options soft  
After you power the phone on.  
When you press after a call or from within a menu.  
In standby mode, you will see the time, day, and date as well as  
all phone status icons.  
Speakerphone Mode  
Place Calls in Standby Mode  
Lets you use your phone handsfree or to share a call with other  
people nearby.  
1. While in standby mode, enter a phone number, and press  
to place a call.  
To place your phone in Speakerphone Mode:  
Press and hold the Speakerphone key ( ) until  
2. Press  
to return to standby mode.  
Speakerphone On” appears in the display.  
Caution!: Keep the phone away from you ear while in Speakerphone Mode. (For  
17  
           
Adjust the Ringer  
To disable Speakerphone Mode:  
Press and hold  
the display.  
until “Speakerphone Off” appears in  
1. In standby mode, press the volume key (  
right side of the phone up or down. Options are:  
) on the  
Ringer Off  
Vibrate  
Low  
Medium  
Medium/High  
High  
Note: Your phone automatically enters Speakerphone Mode when you dial a  
call using the QWERTY keypad and the called phone begins ringing.  
Low/Medium  
Vibrate/High  
Enter/Exit Silent Mode  
OK  
2. When you are satisfied with the setting, press  
or  
.
Silence the tones your keypad makes when you press a key.  
Your phone returns to standby mode.  
To enter Silent Mode:  
In standby mode, press and hold  
. “Entering Silent  
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the  
OK  
Menu key ( ), then pressing the  
,
,
, and  
Mode” briefly appears in the display and your phone  
keys. Use the Volume key on the right side of your phone to adjust the  
ringer volume setting.  
returns to standby mode.  
To exit Silent Mode:  
While in Silent mode and standby mode, press and hold  
Note: The Vibrate icon ( ) appears in the display when the phone is in  
Vibrate mode. The Vibrate/Ring icon (  
) appears in the display  
when the phone is in Vibrate/High mode.  
. “Exit Silent Mode” briefly appears in the display  
and your phone returns to standby mode.  
Vibrate Mode  
In standby mode, repeatedly press the volume key  
) down until Vibrate appears in the display.  
The volume key is on the upper right side of phone.  
(
Understanding Your Phone  
18  
           
Camera Mode  
Camera mode lets you activate your phone’s camera to take  
pictures. In Camera mode, you can also adjust the resolution and  
appearance of your pictures.  
Entering Camera Mode — In standby mode, press and hold the  
Camera key ( ) — on the right side of the phone.  
Exiting Camera Mode — Press the key.  
Music Player Mode  
Music Player mode lets you activate you phone’s Music Player to  
play music files loaded onto an optional microSD™ Memory  
Card.  
Entering Music Player Mode — In standby mode, press the Camera  
key ( ) — on the right side of the phone.  
Exiting Music Player Mode — Press the key.  
19  
   
Section 3: Call Functions  
This section provides procedures for making and answering  
calls. This section also describes features, such as call logs and  
call timers, that help you make calls and manage your call time.  
1. With the phone on, enter the Emergency Number you wish  
to call using the keypad.  
Note: You can define up to 3 emergency numbers in your phone. (For more  
Note: The procedures in this section can be performed using the phone  
keypad or the QWERTY keypad.  
2. Press  
to place the call.  
Tip: When using the QUERTY keypad, it is recommended that you also use an  
optional headset or an optional handsfree car kit or that you place your  
Tip: If you need to make an emergency (911) call with Airplane mode  
enabled, just dial the emergency number and press  
. (For more  
Three-way Calling  
Making a Call  
1. With the phone on, enter the number you wish to call using  
Call two other numbers and connect them to your call using  
three-way calling.  
the keypad.  
1. In standby mode, enter the number for the first party in  
2. Press  
to place the call.  
your call, then press  
2. When connected, ask the other party to remain on the line.  
Press to place them on hold.  
3. Enter the second party’s phone number and press  
.
Emergency Calls  
When you call an Emergency Number, such as 911, your SCH-  
r450 phone locks itself in emergency mode, only allowing you to  
make calls to the emergency call center you originally contacted.  
This enables emergency operators to more easily dispatch aid,  
such as police, fire fighting, and emergency medical personnel.  
.
4. When the second party answers, press  
to connect all  
three parties.  
Call Functions 20  
         
Manual Pause Calling  
In standby mode, press and hold the number key  
corresponding to the desired Contact’s speed dial number.  
To manually call a number with pause(s) without storing it in your  
Contacts list:  
Example: To speed dial the Contact assigned speed dial 5, press and hold  
1. In standby mode, enter the number you wish to call.  
or  
.
2. Press the Options soft key. The following pause options  
2-Touch Dialing  
appear in the display:  
Use 2-touch dialing to speed dial Contacts from 10 through 99.  
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
2-Sec Pause — A 2-second pause after which dialing resumes.  
Wait — A hard pause (waits for input from you).  
3. Highlight the desired pause.  
OK  
4. Press the  
key or  
key to enter the highlighted pause  
2. Press and hold the number key representing the second  
into the number sequence.  
digit of the desired Contact’s speed dial number.  
5. Press  
to call the number.  
Example: To speed dial the Contact assigned speed dial 35, press  
then press and hold or  
or  
.
Tip: Press the Save soft key to store pauses along with the number if you  
plan to call the number frequently.  
3-Touch Dialing  
Speed Dialing  
Use 3-touch dialing to speed dial Contacts from 100 through 999.  
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
Speed Dialing lets you place a call to any Contact stored in your  
Contacts list by dialing the Contact’s Location number.  
1-Touch Dialing  
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)  
through 9.  
21  
 
Voice Dialing Tips:  
2. Press the number key representing the second digit of the  
Wait for the beep before speaking.  
desired Contact’s speed dial number.  
Speak clearly at a normal volume, as if you were talking to someone  
on the phone.  
3. Press and hold the number key representing the third digit  
of the desired Contact’s speed dial number.  
When saying a name, say the first name then the last name.  
Dialing a Name  
Example: To speed dial the Contacts entry assigned to speed dial 325, press  
or  
, press  
or  
, then press and hold  
or  
To dial a name, do the following:  
.
1. In standby mode, press and hold  
or  
.
Voice Dialing  
Say a Command” appears in the display and is  
The voice recognition capabilities of your SCH-r450 are  
pronounced through the earpiece.  
exceptional due to advanced, speaker-independent technology.  
This means you do not need to “train” your phone to understand  
your voice. You can use your voice in a natural manner to dial  
numbers.  
2. Say, “Call”.  
You are prompted to “Say the name or number”.  
3. Speak clearly and say the name of a person in your  
Contacts list, first name followed by last name.  
Note: End Calls Before relaunching the VoiceSignal voice recognition  
software — When you use Voice Dialing to make a call, you must end  
that call before you can use other Voice Commands. See “Voice SVC”  
on page 70 for more information.  
If the name is recognized, Voice Dial repeats the name and  
dials the number.  
Use the Call command to dial any number stored in your  
Contacts list by saying the name of the contact (Name Dialing).  
You can also use Call to dial any telephone number, even  
numbers not stored in your contact list, by speaking the  
individual digits in the number (Digit Dialing).  
If Voice Dial is not sure which name you said, it displays a  
choice list of up to three names and prompts you with “Did  
you say?” followed by the first name on the list.  
Call Functions  
22  
 
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
information.)  
2. Say “Call”.  
VoiceSignal prompts you to “Say the name or number.”  
3. Speak clearly and say the telephone number of the person  
you want to call.  
Press the Repeat soft key to say the name again.  
Press to exit VoiceSignal without dialing.  
For example, say “7 8 1 9 7 0 5 2 0 0."  
If it recognizes the number, Voice Dial repeats it and dials  
the number. If Voice Dial is not sure it has recognized the  
number, it displays a choice list of up to three numbers and  
prompts you with “Did you say?” followed by the first  
number on the list.  
If the recognized name has multiple numbers stored for it  
(that is, Mobile, Work, Home, and so on), Voice Dial  
displays the possible choices and prompts you with  
Which number?”  
5. Say one of the following number types:  
4. Say “Yes” to confirm the number or “No” to hear the next  
one, or use the keypad to select the correct number from  
information.)  
Home  
Work  
Mobile  
Voice Dial dials the specified number.  
Press the Repeat soft key to say the name again.  
Press to exit VoiceSignal without dialing.  
Dialing a Number  
To dial a number using Voice Dial, do the following:  
1. In standby mode, press and hold or  
Pause Dialing From a Contacts Entry  
.
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for  
the pauses to pass and the dialing to complete.  
Say a Command” appears in the display and is  
pronounced through the speaker.  
23  
If you voice dial a contact that contains Wait(s), wait for the appropriate  
prompt(s) from the number you are calling (credit card number, bank  
account number, and so on) and enter the appropriate response(s).  
Different ring types or melodies to distinguish callers.  
Name display with caller ID. (If the caller’s name is programmed into  
your Contacts).  
Information about the last 90 each of incoming, missed, and outgoing  
calls are automatically stored to a call log.  
Answering a Call  
Incoming  
Set Call Ringer Volume  
When you receive a call, the phone displays one of the following:  
1. In standby mode, press the Volume key on the right side of  
If the caller can be identified, the caller’s number (or name if it’s in your  
Contacts) appears in the display.  
the phone.  
If the caller cannot be identified, Call from unavailable # Call from  
restricted #, or no number appears in the display.  
,
2. Press the Volume key up or down to set the call ringer  
volume as desired.  
Adjust the Ringer  
Tip: Assign pictures to Contacts entries. The entry’s assigned picture  
appears in the display when you receive a call from that entry. (See  
1. In standby mode, press the Volume key (  
) on the  
right side of the phone up or down. Options are:  
The phone continues to notify you of the call until one of the  
following events occur:  
• Ringer Off  
• Vibrate  
• Low  
• Medium  
• Medium/High  
• High  
You answer the call.  
• Low/Medium  
• Vibrate/High  
The calling party ends the call.  
The call is sent to voicemail.  
OK  
2. Once you’re satisfied with the setting, press  
or  
.
Call Notification Features  
The phone returns to standby mode.  
Your phone notifies you of a call in a variety of ways.  
Eight ring volume settings: Ringer Off  
,
Vibrate, Low, Low/Medium,  
Medium Medium/High High, or Vibrate/High.  
,
,
Call Functions  
24  
         
Tip: You can also enter the Volume > Voice Calls sub-menu from standby  
Note: Contact your Wireless Carrier for availability.  
OK  
mode by pressing  
Volume  
phone to adjust the ringer volume setting.  
or  
, then selecting Settings  
Sound Settings  
Voice Calls. Use the Volume key on the right side of your  
1. Press  
to place the first call on hold, answer the  
second call, and ask the caller to remain on the line.  
Note: The Vibrate icon (  
) appears in the display when the call ringer is  
2. Press  
the first call.  
3. Press  
to place the second call on hold and return to  
set to Vibrate. The Vibrate/Ring icon (  
) appears in the display  
when the call ringer is set to Vibrate/High.  
to alternate between calls.  
Call Answer  
Caller ID  
Select from two methods for answering calls. This option can be  
Caller ID lets you identify who is calling you by displaying a  
caller’s number. If the caller’s name and number are stored in  
Contacts, the caller’s name also appears. If you’ve assigned a  
picture to the entry, it appears in the display as well.  
changed in the Settings menu.  
OK  
1. In standby mode, press  
or  
, then select Settings ➔  
Call Settings Call Answer.  
The following options appear in the display:  
Call Block  
Any Key — Pressing any key except  
,
, or  
You can prevent your number from displaying on another phone’s  
caller ID screen by enabling Call Block.  
answers a call.  
Send Key — Only pressing  
answers a call.  
1. In standby mode, press  
,
,
(or  
,
,
2. Select Call Answer option of your choice.  
).  
Call Waiting  
2. Enter the number you wish to call, then press  
.
If you’re on a call, your phone beeps when you receive a second  
call. Call Waiting lets you answer the second call and alternate  
between both calls.  
25  
       
Silence an Incoming Ring  
Voice Privacy — When set to Enhanced, the phone sounds an  
audible beep when you loose privacy (encryption) on a CDMA  
connection. For this option to work correctly, you must have the  
Enhanced privacy option enabled in the Security settings. (This  
option is enabled by default.)  
To temporarily silence the incoming call ringer:  
While your phone is ringing, press the Volume key  
), on the left side of the phone, up or down.  
(
Location Turn your GPS location on or set GPS location for  
emergency calls only.  
Ignore an Incoming Call  
Ignored calls are immediately forwarded to Voicemail.  
To ignore an incoming call:  
2. With the above menu displayed, do one of the following:  
Select a menu or feature to access the menu or activate the  
highlighted feature.  
While your phone is ringing, press the Ignore soft key. The  
Press the Cancel soft key to exit the menu.  
incoming call is forwarded to Voicemail.  
Calls  
In-Use Menu  
Your phone has Call Logs that retain information about Outgoing,  
Incoming, and Missed Calls. The Calls menu lets you access this  
information for future reference, to return calls, and to add new  
Contacts. You can also view times for your last call and the total  
of all calls.  
You can access a number of menus and features even while in a  
call.  
1. While in a call, press the Options soft key. The following  
options pop-up in the display:  
Message — Display the Messages menu.  
Contacts — Display the Contacts menu.  
Recent Calls — View your recent calls log.  
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and  
missed), briefly press  
while in standby mode. The All Calls  
screen, listing up to 270 of your most recent calls, appears in the  
display.  
Send DTMF — Send your phone number as DTMF tones to the  
other person on the call.  
Call Functions  
26  
         
View Timer  
Call Timer screen appears in the display listing the  
Outgoing Calls  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
The last 90 outgoing calls are stored in the Outgoing calls log.  
Review the Outgoing calls log for the time and date of a call, as  
well as other information.  
Select an option to perform its function.  
Incoming Calls  
OK  
1. In standby mode, press  
or  
, then select Calls ➔  
The last 90 Incoming calls are stored in your phone’s Incoming  
calls log. You can review the Incoming calls log for time and date  
of each call, as well as other information.  
Outgoing Calls. A list of your outgoing calls appears in the  
display.  
2. Highlight a call. You have the following options:  
OK  
1. In standby mode, press  
or  
, then select Calls ➔  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message screen appears in the display. (For more  
Incoming Calls. A list of your Incoming calls appears in  
the display.  
2. Highlight a call. You have the following options:  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message screen appears in the display. (For more  
page 56.)  
OK  
To view further information about the call, press OPEN  
(
or  
).  
To access further options, press the Options soft key. The following  
options appear in the display:  
OK  
To view further information about the call, press OPEN  
(
or  
Save — Save the number to your Contacts.  
).  
Details — Contacts calls only — Lets you view the Contacts entry for  
the recipient of this call.  
To access further options, press the Options soft key. The following  
options appear in the display:  
Erase — Erase the selected call from your Outgoing calls list.  
Save — Save the number to your Contacts.  
Lock/Unlock — Blocks/permits erasure of the selected call from your  
Outgoing call list.  
Details — Contacts calls only — Lets you view the Contacts entry for  
the originator of this call.  
Erase all — Erase all unlocked calls from your Outgoing call list.  
27  
       
Erase — Erase the selected call from your Incoming calls list.  
Lock Unlock — Blocks/permits erasure of the selected call from your  
To access further options, press the Options soft key. The following  
options appear in the display:  
/
Incoming calls list.  
Save — Save the number to your Contacts.  
Erase all — Erase all unlocked calls from your Incoming calls list.  
Details — Contacts calls only — Lets you view the Contacts entry for  
the originator of this call.  
View Timer  
Call Timer screen appears in the display listing the  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
Erase — Erase the selected call from your Missed calls list.  
Lock/Unlock — Blocks/permits erasure of the selected call from your  
Select an option to perform its function.  
Missed Calls  
Missed calls list.  
Erase all — Erase all unlocked calls from your Missed calls list.  
View Timer  
Call Timer screen appears in the display listing the  
The last 90 missed calls (calls you did not answer) are stored in  
the Missed calls log. Review the Missed calsl log for the time and  
date of the call, as well as other information.  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
Select an option to perform its function.  
OK  
1. In standby mode, press  
or  
, then select Calls ➔  
Erase Logs  
Missed Calls. A list of your missed calls appears in the  
You can erase Outgoing, Incoming, Missed, or All Calls.  
display.  
Erase All Calls  
2. Highlight a call. You have the following options:  
OK  
1. In standby mode, press  
or  
, then select Calls All  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message screen appears in the display. (For more  
Calls. The All Calls list appears in the display with the first  
call in the list highlighted.  
2. Press the Options soft key, then select Erase all. “Erase  
all entries?” prompts you to confirm erasure of all Calls  
log entries.  
OK  
To view further information about the call, press OPEN  
(
or  
).  
Call Functions  
28  
       
3. To Erase all calls, press the Yes soft key. To keep the calls,  
3. Press the Reset soft key to reset the highlighted timer.  
press the No soft key.  
Press the Reset All soft key to reset all of the timers  
except Lifetime Calls.  
Call Timer  
OK  
4. Press  
to exit the Call Timer screen.  
View the duration of your last call, total calls, and calls made  
during the life of your phone using the Call timer feature. Call  
timer is not for billing purposes.  
Note: Although Total call timers can be erased, LifeTime call timers can  
never be erased.  
OK  
1. In standby mode, press  
or  
, then select Calls ➔  
Data Counter  
Call Timer. The following options appear in the display:  
Use Data Counter to view the amount of data that has been sent  
or received (or a total of both) using the data services that your  
phone supports. The Data Counter can be a helpful tool for  
monitoring data usage, especially if your service agreement has  
specified limits.  
Last Call — Shows the duration of your last call.  
Outgoing Calls — Shows the number and total duration of all  
calls originated by your phone since the last reset.  
Incoming Calls — Shows the number and total duration of all  
calls made to your phone since the last reset.  
OK  
1. In standby mode, press , then select Calls Data  
Roaming Calls — Shows the number and total duration of all  
calls originated by and made to your phone while roaming and  
since the last reset.  
Counter. The following options appear in the display:  
Transmit KB — Shows the amount of data (in kilobytes) that your  
All Calls — Shows the number and total duration of all calls  
originated by and made to your phone since the last erasure.  
phone has transmitted since last being reset.  
Received KB — Shows the amount of data (in kilobytes) that your  
phone has received since last being reset.  
Last Reset — Shows the date and time all counters, except  
Lifetime Calls, were reset.  
Total — Shows the amount of data (in kilobytes) that your phone  
has transmitted and received since last being reset.  
Lifetime Calls — Shows the duration of all calls on your phone  
since activation (Lifetime timers cannot be reset).  
• Last Reset — Shows date and time the Data Counters (except  
Lifetime Data Counter) were last reset.  
2. If desired, highlight a particular timer.  
29  
             
Lifetime Data Counter — Shows the amount of data (in  
kilobytes) that your phone has transmitted and received since being  
activated.  
for Missed Calls  
for All Calls  
3. Use the Up and Down navigation keys to highlight the  
2. To reset a timer other than Lifetime Data Counter, highlight  
OK  
number you wish to store in Contacts and press  
.
the timer you want to reset and press the Reset soft key.  
4. Press the Options soft key, then use the Up and Down  
3. To reset all timers except Lifetime Data Counter, press the  
navigation keys to highlight Save.  
Reset All soft key.  
5. Select Create New to add the number as a Contacts entry,  
or select Update Existing to find a Contact with which to  
associate the new number.  
OK  
4. Press  
to exit the Data Counter screen.  
Note: Although other data counters can be reset, only the Lifetime Data  
Counter can never be reset.  
6. Follow the prompts to store the number to Contacts.  
Store Numbers from Call Logs  
Store numbers from your Outgoing, Incoming, Missed, and All  
calls logs to Contacts.  
Tip: In standby mode, briefly press  
to display the Recent Calls list. You  
can then select any call in the list to save to Contacts.  
OK  
1. In standby mode, press  
or  
, then select Calls.  
2. Press the corresponding number on the keypad to view  
call logs for the following call types:  
for Outgoing Calls  
for Incoming Calls  
Call Functions  
30  
 
Section 4: Menu Navigation  
This section explains the menu navigation for your phone.  
Menu Shortcuts  
Menu Navigation  
Access the menus and sub-menus in your phone using the  
Use shortcuts to quickly access menus and sub-menus. Press  
OK  
or  
, then press the number to the left of the menu label to  
jump to the desired menu, sub-menu, or feature.  
OK  
navigaTion key (  
and soft keys (  
) , the arrow keys (  
,
,
,
),  
or ), or use a shortcut.  
OK  
Example: To jump to the Outbox sub-menu, press  
or (for Messages) and  
or  
, then press  
for Outbox.  
OK  
1. In standby mode press  
or  
. The first of several  
or  
menus appear in the display.  
Navigation Key Shortcuts  
QWERTY Keypad Closed  
Note: More than one menu may appear in your display. This setting can be  
modified in the Display / Menu Style menu. (See “Menu Style” on  
In standby mode and with the QWERTY keypad closed, press a  
navigation key to launch the key’s corresponding application in  
the pattern shown here.  
2. Use the Navigation key to browse through the menus.  
OK  
3. Press  
or  
to enter the menu or sub-menu that  
Contacts (Find)  
appears in the display.  
4. Press the Back soft key or press or  
to return to  
to return  
OK  
MetroWEB  
@metro  
the previous menu.  
Return to the Previous Menu  
Press the Back soft key to return to a previous menu.  
When Back does not appear in the display, press  
Messages  
or  
to the previous menu.  
31  
               
OK  
QWERTY Keypad Open  
1. In standby mode, press  
or  
.
2. Press the number of the menu, sub-menu, and so on  
In standby mode and with the QWERTY keypad open, the  
navigation key application pattern rotates 90° as shown here.  
for the feature that you wish to access.  
Contacts (Find)  
OK  
Example: Press  
or  
, then press  
or  
, and  
or  
.
This takes you to the Tools (Menu 8), and then to the Calendar  
(sub-menu 2).  
MetroWEB  
@metro  
Messages  
QWERTY Keypad Shortcuts  
In standby mode and with the QWERTY keypad open, you have  
the option of using the arrow keys on the QWERTY keypad itself  
to launch applications, as shown here.  
Contacts (Find)  
MetroWEB  
@metro  
Messages  
Navigate Using a Shortcut  
You can also access menus and sub-menus using menu  
OK  
numbers. Enter the menu number after pressing  
or  
to go  
directly to the menu or sub-menu of your choice. Before you can  
navigate using a shortcut, you’ll need the menu or sub-menu  
number that you wish to access.  
Menu Navigation  
32  
   
Section 5: Entering Text  
This section outlines how to select the desired text entry mode  
when entering characters using the phone keypad or the nested,  
QWERTY keyboard-style keypad. This section also describes how  
to use the T9 predictive text entry system to reduce the number  
of key strokes needed to enter text.  
Your r450 has a built-in, keyboard-style keypad, commonly  
called QWERTY, that you can access by sliding it open from  
beneath the top section of the phone. This also automatically  
rotates the image in the display to show information in a wider,  
landscape format. Using the QWERTY keypad, you can type  
letters, numbers, punctuation, and other special characters into  
text entry fields or other applications simpler and faster than  
using the telephone keypad.  
Built-in QWERTY Keypad  
Display  
Note: Two of your phone’s functions (@metro and MetroWEB) call for you to  
use the QWERTY keypad. Other functions requiring text entry (such as,  
Messaging and Memo Pad) accept text entry from whichever keypad  
you prefer.  
Changing the Text Entry Mode  
Text messages can be made up of alphabetical characters,  
numbers, and symbols. You can use the following text entry  
modes to simplify text entry:  
Clear  
Key  
T9 Word — Press each phone key only once to enter the letter of the  
word that you’re spelling. T9 WORD mode letter options are:  
T9 Word — Enter initial capital letters  
T9 WORD — Enter all upper case letters  
T9 word — Enter all lower case letters  
Left Soft  
Key  
Fn (Input  
Mode) Key  
Navigation  
Keys  
Right  
Soft Key  
33  
                 
The following options appear in the display:  
Note: T9 Word does not support the QWERTY keypad, which does not need  
this function.  
T9Word  
Abc  
Abc — Enter letters, numbers, and symbols by using the QWERTY  
keypad or by repeatedly pressing each phone key until the desired  
character (as shown on the key) appears in the display. ABC mode  
letter options are:  
ABC  
123  
Symbols  
Abc — Enter initial capital letters  
ABC — Enter all upper case letters  
abc — Enter all lower case letters  
• Add T9 Word  
2. Select the desired text entry mode.  
®
Using T9 Mode (Phone Keypad Only)  
123 — Enter numbers by pressing the corresponding keys on the  
T9 Word recognizes commonly used words for the numeric  
sequence of key presses and inserts the word into your message.  
T9 Word is much faster than the traditional method of text entry  
(Abc) and requires only one key press per letter of the word that  
you’re spelling.  
phone keypad or the QWERTY keypad.  
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into  
your message simply by pressing the keys labeled with the symbols you  
want.  
Symbols — Using the phone keypad, enter a symbol into your  
message by pressing the number above the symbol in the Symbols  
pop-up window.  
1. While composing a text message, press the Left soft key,  
then select T9Word.  
For practice, enter the word “Samsung” by pressing each of the  
following keys only once:  
The current text entry mode (T9 Word, Abc, ABC, 123, or  
Symbols) is indicated in the lower part of a text entry screen. To  
change the text entry mode, do the following:  
1. While composing a text message, press the Left soft key.  
S
A
M
S
U
N
G
Entering Text  
34  
   
T9 Word recognizes that the most commonly used word for the  
numeric sequence you just entered is “Samsung.”  
If more than one word shares the same numeric sequence, T9 Word  
provides the most commonly used word, any additional words appear in  
a pop-up window, in which you can select a desired word.  
Using Abc Mode  
1. While composing a text message, do one of the following:  
Using the QWERTY keypad, press  
lower left corner of the display.  
until “Abc” appears in the  
Using the phone keypad, press the Left soft key, then select Abc  
.
Note: To enter a space, press  
. To enter a period, press  
. These  
2. Enter characters while in Abc mode by using one of  
key functions apply to both T9 Word and Abc modes. For other  
following keypads:  
Using the QWERTY keypad, press the key labeled with the desired  
Adding Words to the T9 Word Dictionary  
character (such as, press  
for “G” and  
for “H”).  
If pressing the keys corresponding to a word you want to enter  
and then scrolling through the pop-up list does not display that  
word, do the following:  
Using the phone keypad:  
Press the key repeatedly until the desired character appears in the  
display (such as, press once for “G” and twice for “H”).  
1. Clear the word by pressing and holding  
.
Pause briefly and the displayed character is accepted and inserted into  
your message.  
2. Change the text entry mode to Add T9 Word  
.
Press  
to enter a space and press  
to enter a period.  
Note: See “Changing the Text Entry Mode” on page 33 for instructions on  
changing the text entry mode to Add T9 Word  
Entering Numbers  
.
Enter numbers into a text message while in 123 mode.  
3. Enter the word you want to add to the T9 Word dictionary.  
1. While composing a text message, do one of the following:  
Using the QWERTY keypad, press  
lower left corner of the display.  
until “123” appears in the  
Note: In Add T9 Word mode, you enter a word using the same multiple  
keypress method as when in Abc text entry mode.  
Using the phone keypad, press the Left soft key, then select 123  
.
OK  
4. Press . The word is added to the T9 dictionary.  
35  
       
2. Enter numbers while in 123 mode by pressing the key  
labeled with the corresponding number that you wish to  
insert into your message.  
Entering Symbols  
Enter symbols such as “@” or “%” into a text message.  
While composing a text message, enter symbols by using  
one of following keypads:  
Using the QWERTY keypad:  
Press  
until “123” appears in the lower left corner of the display.  
Press the key(s) labeled with the corresponding symbol(s) that you wish  
to insert into your message.  
Using the phone keypad:  
Press the Left soft key, then select Symbols. The first of three symbol  
screens appears in the display.  
Use the Left and Right soft keys to page through the other symbols, if  
desired.  
Press the key that corresponds with the symbol that you wish to enter.  
For example, press  
for an exclamation point (!).  
Repeat these steps to insert additional symbols into your message.  
Entering Text  
36  
   
Section 6: Understanding Your Contacts  
This section details how you can manage your daily contacts by  
storing their names and numbers in your Contacts list. You can  
have your Contacts entries sorted by name.  
The following options appear in the display:  
Find — Find a phone number By Name.  
Tip: You can also access the Find option from standby mode, by pressing the  
Contacts shortcut (Up Navigation) key.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
Add New Contact — Add a number or e-mail address to your  
Contacts.  
Contacts  
Speed Dial — Assign a Contacts entry to a Speed Dial number.  
(See “Speed Dial” on page 45 for more information.)  
Up to 500 entries can be stored in Contacts. Each entry can have  
up to five associated phone numbers and one e-mail address.  
Each phone number can be up to 32 digits in length, including 2-  
more information), and associated names can be up to 32  
characters in length. You can assign the Speed Dial numbers of  
your choice for each entry. You can also mark your Contacts list  
as Restricted to prevent unauthorized viewing. (See “Restriction”  
on page 111 for more information).  
Group — Review, send messages to, add Contacts to, or rename  
four out of your five groups. (See “Contacts Groups” on page 46  
for more information.)  
• Metro411  
Launches Metro411 Directory Assistance. (For more  
information, contact your Wireless Carrier.)  
Memory Info — Display used and available memory for Contacts  
entries.  
Tip: To launch the Contacts menu using a voice command — In standby  
mode, press and hold  
until the phone prompts, “Say a  
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch  
command.” Say “Go to Contacts” into the microphone.  
Dialing allow you to call numbers stored in Contacts faster.  
2. Select the desired option.  
Open Contacts  
OK  
1. In standby mode, press , then select Contacts.  
37  
         
If VoiceSignal recognizes the name you said, the contact  
information for that name appears in the display.  
Tip: You can also press the keypad number key that corresponds to the menu  
option number.  
If VoiceSignal does not recognize the name you said, a choice list of  
up to three names appears in the display, and VoiceSignal prompts  
you with “Did you say?” followed by the first name on the list.  
Finding a Contacts Entry  
Voice Method  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
information.)  
Use the VoiceSignal Lookup command to view contact  
information for any named contact stored in your Contacts list by  
saying the name.  
Note: The Lookup command shows the requested contact information in the  
To say the name again, press the Repeat soft key.  
To exit VoiceSignal without dialing, press  
display but does not dial any phone numbers for the contact.  
.
To look up information for a specific contact:  
5. The contact information for the name you selected appears  
1. In standby mode, press and hold  
to launch  
in the display.  
VoiceSignal.  
To dial the number associated with the name, press  
.
To erase this entry from your Contacts list, press the Erase soft key.  
Say a Command” appears in the display and is  
OK  
To add or change information for this entry, press EDIT  
(
).  
pronounced through the speaker.  
For more options, press the Options soft key and the following  
options pop-up in the display:  
2. Say “Lookup”.  
VoiceSignal prompts you to “Say the name.”  
Send Txt Msg  
Send Pic Msg  
3. Speak clearly and say the full name of the person you want  
Call  
to call, exactly as it is entered in your Contacts list.  
Send Name Card Via Bluetooth  
Understanding Your Contacts  
38  
     
Shortcut Key Method  
To add or change information for this entry, press the Edit soft key.  
OK  
To show information about the entry., press VIEW  
(
)
If you’ve stored a name entry in Contacts, Find allows you to find  
it quickly.  
For more options, press the Options soft key and the following  
options pop-up in the display:  
1. In standby mode, press the Contacts soft key or the  
New Contact — Add a new entry to Contacts.  
Contacts shortcut (Up navigation) key.  
Erase — Erase the name and associated information.  
The Find screen appears in the display with the Go To field  
Send Txt Msg — Create and send a text message to the selected  
Contact.  
and the first Contacts entry highlighted.  
Send Pic Msg — Create and send a picture message to the selected  
Contact.  
Tip: You can also access the Find screen from the Contacts menu by  
selecting Find.  
Call — Dial the number associated with the name.  
Send Name Card Via Bluetooth — Send a copy of a Contacts entry  
to another Bluetooth device.  
2. Enter a name as entered in Contacts. For example, if you  
saved the name as “Amy Smith”, begin the search by  
Select an option. The selected option’s sub-menu appears in the  
display.  
pressing  
or (for A”).  
Adding a New Contacts Entry  
You can use either of two methods to add an entirely new entry to  
Contacts.  
As you enter letters, the names of the closest matches  
appear in the display.  
3. When the desired entry is listed in the display, highlight the  
Dial Method  
entry.  
1. Using the keypad, enter the number you wish to add to  
To dial the default number associated with the name, press  
.
your Contacts.  
Tip: You can select another number assigned to the name by using the Left/  
2. Press the Save soft key.  
Right navigation keys.  
The following options appear in the display:  
39  
     
Create New — Lets you create a new Contacts entry.  
The Add New Entry screen appears in the display with the  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
Name field highlighted.  
2. Enter the name of the new entry using either keypad. (See  
3. Select Create New. The Create New screen appears in the  
“Entering Text” on page 33 for more information.)  
display showing the following icons:  
3. Highlight one of the following fields:  
Mobile  
Home  
Work  
Pager  
Fax  
Mobile  
Home  
Work  
Pager  
Email  
Group  
Ringtone  
Fax  
4. Enter a phone number or e-mail address in the highlighted  
4. Select the number type that matches your new entry.  
field.  
5. Use the keypad to enter a name to associate with the  
5. Repeat steps 3 and 4 as needed.  
Contacts entry.  
OK  
6. Press  
or  
to save the new entry.  
OK  
6. Press  
or  
to save the new entry.  
Menu Method  
1. From the Contacts menu, select Add New Contact.  
Understanding Your Contacts  
40  
     
2-Sec Pause — A 2-second pause after which dialing resumes (see  
information).  
Editing a Contacts Entry  
Editing Contacts Name and Numbers  
1. Find the Contacts entry you wish to change. See “Finding a  
Select the desired option.  
5. When you’re finished changing the contents of a field,  
OK  
OK  
press  
or  
. Your changes are saved and a  
2. Highlight the entry and press VIEW  
(
or  
). The View  
confirmation message appears in the display.  
Contact screen appears in the display showing the  
highlighted entry’s information.  
Add Pauses to Contacts Numbers  
3. Use the Up/Down navigation keys to review the information  
Calls to automated systems such as banking services often  
require a password or account number. Instead of manually  
entering these numbers, you can store them in a Contacts entry  
with the phone number and with special characters called  
pauses, up to a maximum of 32 digits.  
OK  
for the entry that you wish to change, then press EDIT (  
or  
). The Edit Contact screen appears in the display.  
4. Highlight the particular information you want to add or  
change.  
Wait — Stops the calling sequence until the phone receives further  
input.  
To backspace and delete numbers or letters, press or  
To clear all numbers or letters in the highlighted field, press and  
hold or  
.
2-Sec Pause — Stops the calling sequence for two seconds, then  
sends the remaining digits.  
.
For more options, press the Options soft key and the following  
Note: You can enter multiple Waits to extend the length of a pause. For  
example, two consecutive Waits cause a total pause time of four  
seconds. Keep in mind that pauses count as digits towards the 32-digit  
maximum.  
options pop-up in the display:  
Set Speed Dial Remove speed dial — Assign/remove a speed dial  
/
Set as default — Set the number the phone will dial when Contacts  
dialing, speed dialing, or voice dialing.  
Wait — A hard pause (waits for input from you).  
41  
                 
To add pauses to a Contacts entry number, do the following:  
1. Find the Contacts entry associated with the number you  
want to include one or more pauses. (See “Finding a  
Edit an Existing E-mail Address  
1. Find the Contacts entry you want to edit. (See “Finding a  
2. Highlight the desired Contacts entry, then press the Edit  
2. Select and edit the desired number. (See “Editing a  
soft key.  
The Edit Contact screen appears in the display.  
3. Press the Options soft key. The following pause options  
3. Highlight the Email field.  
appear in the display:  
4. Use either keypad to edit the e-mail address. (See  
Wait — A hard pause (waits for input from you).  
“Entering Text” on page 33 for more information.)  
2-Sec Pause — A 2-second pause after which dialing resumes.  
OK  
5. Press  
or  
to save your changes.  
4. Select the desired pause to add it to the number sequence.  
Assigning a Picture to a Contacts Entry  
OK  
5. When you’re finished entering information, press  
or  
When you assign a picture to a Contacts entry, the picture you  
assign appears in the display when you receive a call from that  
Contact.  
to store the number to Contacts.  
Pause Dial from Contacts  
1. If you stored the number using 2-second pause(s), simply  
1. Find the Contacts entry you want to edit. See “Finding a  
recall the number from Contacts.  
2. If you stored the number using Wait(s), recall the number  
from Contacts and wait for the appropriate prompt from  
the dialed number.  
2. Highlight the desired Contact, then press the Edit soft key.  
The Edit Contact screen appears in the display.  
3. Highlight the Picture ID field (at the top of the Edit  
3. Press  
to dial the number.  
Contact screen), then press the Set soft key.  
Understanding Your Contacts  
42  
   
A photo gallery screen appears in the display, showing a  
series of thumbnail photos. (See “Using My Images  
Gallery” on page 81 for more information.)  
2. Highlight the desired Contact, then press the Edit soft key.  
The Edit Contact screen appears in the display.  
3. Highlight the Ringtone field, then press the Set soft key.  
The Contact Tone menu showing the following options  
appears in the display:  
4. Select the picture that you wish to assign to the Contacts  
entry.  
My Ringtones  
My Sounds  
If there is no usable picture in the photo gallery screen:  
Press the Camera soft key. The camera viewfinder screen appears  
in the display.  
4. Select the desired option. The My Ringtones file list or the  
OK  
Press TAKE  
the display.  
(
or  
). The picture you have taken appears in  
My Sounds file list appears in the display.  
5. Select the ringtone or sound that you wish to assign to the  
Contacts entry. The Contacts entry screen appears in the  
display with the name of the selected file in the Ringtone  
field.  
OK  
Press OK  
(
or  
).  
5. The Contacts entry screen appears in the display with a  
thumbnail view of the selected picture in the Picture ID  
field.  
OK  
6. Press  
or  
to save the ringer assignment to the  
OK  
6. Press  
or  
to save your Picture ID assignment.  
selected Contacts entry.  
Assigning a Ringtone to a Contacts Entry  
Saving a Number After a Call  
Once you finish a call, you can store the caller’s number to your  
Contacts list.  
When you assign a ringtone to a Contacts entry, the phone plays  
the ringtone that you assign when you receive a call from that  
Contact instead of the Voice Calls ringtone.  
1. Find the Contacts entry you want to edit. See “Finding a  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
43  
     
1. Press  
to end your call. The call time, length of call,  
Work  
phone number, and name of the party (if available) appear  
in the display.  
Pager  
2. Press the Save soft key. The Save screen appears in the  
Fax  
display showing the following options:  
Create New — Lets you create a new Contacts entry.  
2. Select the number type that matches your new entry.  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
3. Enter a name for the new entry. (See “Entering Text” on  
3. Select the desired option, then follow the instructions in  
the upcoming sub-sections depending on whether the  
number is a new entry or you are adding it to an existing  
entry.  
OK  
4. Press  
or  
to save the new entry to your Contacts  
list.  
Add to an Existing Entry  
1. From the Save screen, select Update Existing. The  
Update Existing screen appears in the display showing  
your Contacts list with the Go To field and the first  
Contacts entry highlighted.  
Create a New Entry  
1. From the Save screen, select Create New. The Create  
New screen appears in the display showing the following  
number type options:  
2. Find and select the Contacts entry to which you want to  
Mobile  
Home  
Understanding Your Contacts  
44  
   
The following number type options appear in the display:  
Speed Dial  
A Contacts entry’s Speed Dial number corresponds to the number  
keys you press to speed dial one of that entry’s numbers. For  
example:  
Mobile  
Home  
Work  
Pager  
Fax  
To speed dial the Contacts entry assigned to Location 5, press and hold  
or , (1-touch dialing).  
To speed dial the Contacts entry assigned to Location 35, press  
or then press and hold or , (2-touch dialing).  
To speed dial the Contacts entry assigned to Location 235, press  
or , press or , then press and hold hold or  
(3-touch dialing).  
,
You can assign one or more Speed Dial numbers to a Contacts  
entry during new entry creation or by editing an existing entry.  
Note: Number types that are already assigned a number show the number  
instead of the number type label.  
Assignment During Entry Creation  
3. Select the desired unassigned number type. The Contacts  
entry information appears in the display with the new  
number posted in the appropriate number type field.  
To assign a Speed Call number to a new Contacts entry number,  
do the following:  
1. Follow either of the New Contacts entry procedures (see  
a name for the entry.  
OK  
4. Press  
or  
to save your changes to the existing  
entry.  
OK  
2. After entering the Contacts entry name, do not press  
or  
. Instead, highlight the number field to be assigned a  
Speed Dial number.  
45  
         
3. Press the Options soft key, then select Set Speed Dial. The  
3. Highlight the number field marked by the Speed Dial icon  
).  
Speed Dial screen appears in the display.  
(
4. Highlight an Unassigned Speed Dial number or enter an  
Unassigned Speed Dial number in the Go To field using  
either keypad.  
4. Press the Options soft key, then select Remove speed dial  
Remove speed dial?” prompts you to confirm your  
desire to remove the entry.  
.
5. Press the Yes soft key to remove the Speed Dial  
assignment. “Speed Dial Removed” pops up in the  
display, and you are returned to the Edit Contact screen.  
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are  
already assigned to Voicemail (001) and to emergency use (911).  
OK  
5. Press SET ( or  
). You are prompted to confirm your  
6. Do steps 2 through 7 of the “Assignment During Entry  
Speed Dial number assignment.  
6. Press the Yes soft key to save your Speed Dial assignment  
Contacts Groups  
and return to the Add New Entry screen.  
Contact Groups let you easily send messages to multiple,  
selected Contacts. You can also use Groups to find Contact  
entries and to add/remove Contacts names in a Group or to  
create or rename a Group.  
Press the No soft key to discard the assignment and return  
to the Speed Dial screen.  
OK  
7. Press  
or  
to save your changes.  
Add Contacts Entry to a Group  
Changing a Speed Dial Location  
Using Add New/Edit Contact Option  
1. Find the Contacts entry you want to edit. See “Finding a  
To add a Contact to a Group using either the Add New Contact  
option or the Edit Contact option, do the following:  
2. Highlight the desired entry, then press the Edit soft key.  
Understanding Your Contacts  
46  
   
OK  
1. Create a Contacts entry (see “Adding a New Contacts  
Entry” on page 39 for more information) that you want to  
add to a Group.  
4. Press  
or  
to save your changes.  
Using Group Add Option  
The Add option lets you add one or more existing Contacts to a  
Group.  
– Or –  
1. From the Contacts menu, select Group.  
Find a Contacts entry (see “Finding a Contacts Entry” on  
page 38 for more information) that you want to add to a  
Group.  
The Group List screen appears in the display showing  
Groups similar to the following:  
No Group  
Business  
Colleague  
Family  
2. Highlight the Group field, then press the Set soft key.  
The Select Group screen appears in the display showing  
Groups similar to the following:  
No Group  
Business  
Colleague  
Family  
Friends  
2. Highlight a Group, then press the Options soft key. The  
following options pop-up in the display:  
Send Txt Msg  
Send Pic Msg  
Rename  
Erase  
Friends  
3. Select the Group to which you want to assign the selected  
Contact.  
You are returned to the Add New Entry/Edit Contact  
screen and the selected Group name populates the Group  
field.  
Add  
3. Select Add. The Add Contacts screen appears in the  
display showing a list of Contacts entries.  
47  
4. Do one of the following:  
The Rename Group screen appears in the display.  
Highlight a Contacts entry you want to add to the group, then press  
4. Enter changes to the group name using either keypad.  
OK  
MARK  
(
or  
). A checkmark appears in the entry’s  
checkbox.  
5. When you have completed your changes to the Group  
Repeat as needed to check all the desired Contacts.  
OK  
name, press SAVE ( or  
).  
Press the Mark All soft key.  
Group Renamed” appears in the display followed by the  
Note: To unmark a marked Contact, highlight the Contact and press MARK  
OK  
(
or  
) to clear the checkmark.  
Group List screen showing your renamed Group.  
Add a New Group  
5. When you have marked the Contacts you want to add to  
the group, press the Done soft key. “Contact added to  
group” appears in the display, followed by the selected  
Group list including the added Contacts.  
The New option lets you add Groups.  
1. From the Contacts menu, select Group. The Group List  
screen appears in the display.  
2. Press the New soft key. The New Group screen appears in  
Rename a Group  
the display.  
The Rename option lets you change the name any of the Groups,  
except No Group.  
3. Enter a new group name using either keypad. (See  
1. From the Contacts menu, select Group. The Group List  
“Entering Text” on page 33 for more information.)  
screen appears in the display.  
OK  
4. Press SAVE ( or  
). “Group Saved” appears in the  
2. Highlight a Group name (other than No Group) that you  
display followed by the Group List screen showing your  
new Group.  
wish to change, then press the Options soft key.  
3. Select Rename.  
Understanding Your Contacts  
48  
Erase a Group  
Metro411  
The Erase option lets you delete a Group, thus freeing you to  
The Metro411 menu option lets you access Metro411 Directory  
reassign the Contacts formerly in the Group.  
Assistance service.  
1. From the Contacts menu, select Group. The Group List  
1. Open the QWERTY keypad.  
screen appears in the display.  
Note: Metro411 is only accessible using the QWERTY keypad.  
2. Highlight the Group you wish to delete, then press the  
2. From the Contacts menu, select Metro411  
Metro411 Diretory Assistance screen appears in the  
display.  
.
Options soft key, and select Erase.  
A
You are prompted to confirm the Group erasure.  
3. Press the Yes soft key to confirm erasure of the highlighted  
Group. Press the No soft key to retain the Group.  
Note: For more information about Metro411 Directory Assistance service, contact  
your Wireless Carrier.  
Note: When you delete a Group, the assigned Contacts entries return to No  
Group  
.
Memory Info  
The Memory Info menu option lets you view the amount of  
memory you have used to store Contacts entries, as well as the  
memory remaining to store more Contacts entries.  
Deleting a Contacts Entry  
1. Find the Contacts entry you want to delete. (See “Finding a  
From the Contacts menu, select Memory Info.  
2. Highlight the desired entry, then press the Options soft  
key, and select Erase. The phone prompts you to confirm  
the erasure.  
The Memory Info Contacts screen appears in the display  
showing the amount of memory Used and remaining (Free)  
for Contacts entries.  
3. Press the Yes soft key to confirm erasure of the selected  
Contact. Press the No soft key to retain the Contact.  
49  
           
Section 7: @metro  
With @metro, you can download full featured applications over  
the air including games, personalized ring tones, pictures, and  
more. You can send and receive instant messages and email, or  
browse the web to catch up on all the latest news.  
The @metro menu appears in the display as shown.  
Applications Shopping and Downloading  
Download games, ring tones, e-mail, and more using the Mobile  
Shop. For information on airtime charges, contact your Wireless  
Carrier.  
This section outlines how to obtain games and other applications  
for your phone. For more information, contact your Wireless  
Carrier.  
1. At the @metro menu, select the Mobile Shop (  
).  
Accessing @metro (Mobile Shop)  
1. Open the QWERTY keypad.  
Note: The first time you access Mobile Shop, “Browsing online and  
downloading apps may incur network usage charges” appears in  
the display along with instructions on how to remove this message.  
Note: @metro is only accessible using the QWERTY keypad.  
Your phone takes a moment to connect, then the Mobile  
Shop Catalog menu appears in the display.  
2. In standby mode, do  
one of the following to  
launch @metro:  
2. Follow the instructions in your phone’s display.  
Note: Please check with your Wireless Carrier for availability of applications.  
Changing Your @metro Settings  
Press the Right  
navigation key or  
.
Press  
@metro  
, then select  
@metro  
Use the Settings menu in Mobile Shop to manage, move, order  
applications, and much more.  
.
@metro  
50  
         
Buying New Apps  
1. At the @metro menu, select Settings ( ). The following  
options appear in the display:  
To buy new and exciting apps, visit the MobileShop. It provides  
you with a variety of apps you can choose from.  
Order Apps — Download applications over the network.  
What do I pay?  
Move Apps — Move previously downloaded applications between  
available folders.  
When you buy an app, you will be charged for the purchase cost  
of the app.  
Manage Apps — View used and available memory.  
Main Menu View — Select whether you wish to view the main  
Mobile Shop menu in a list or icon format.  
Demo Apps  
A Demo app is free and is designed to demonstrate the app’s  
main features. It usually expires after a certain period of time or a  
number of uses and often has limited functions. When you run a  
demo app, you will be presented with a purchase option so you  
won’t have to look for the app in the MobileShop.  
View Log — View the Mobile Shop log, which displays information  
about recent activity using Mobile Shop.  
2. Select the desired option to enter the option’s sub-menu  
and view or change settings.  
Removing Apps  
Using On-line Help  
The Help sub-menu within @metro is a short tutorial on several  
@metro-Mobile Shop features. View information about charges,  
cancelling subscriptions, buying apps, disabling apps, and more.  
You may remove apps that are no longer needed. When you  
remove an app, you cannot use the application unless you  
purchase it again. To remove an app, choose Settings > Manage  
Apps. Then, select the app you want to remove.  
1. At the @metro menu, select Help ( ). The Help subjects  
?
Disabled Apps  
described in the following subsections appear in the  
display.  
You can install new apps even if the memory of your phone is full  
by partially removing (disabling) apps you haven’t used recently.  
When you need to use a disabled app, you can restore it at no  
additional purchase cost.  
2. Select the desired Help subject to view the selected Help  
information.  
51  
       
Restoring Apps  
Disabled apps can be quickly restored at no additional purchase  
cost. To restore an app, run the application you want to restore  
from the Main Menu. You will be guided through the restoration  
process.  
Expired Apps  
Apps that were purchased based on the number of uses or time  
expire. You can purchase additional uses from the MobileShop.  
@metro  
52  
     
Section 8: Messaging  
This section explains how to send or receive different types of  
messages. This section also describes the features and  
functionality associated with messaging.  
Tip: To launch the Create Txt Msg screen using a voice command — In  
standby mode, press and hold or until the phone prompts,  
Say a command.” Say “Send Text” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
2. Enter the phone number or e-mail address of the recipient,  
OK  
then press  
or  
. The Text: appears in the display.  
Types of Messages  
Your phone is able to send and receive Text and Picture  
messages to compatible phones and devices. Text messages can  
be up to 160 characters in length.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the To: list.  
,
3. Enter the text content of your message using either  
information.)  
Note: Available memory is shared between all messages. You can store up to  
100 messages. However, the exact number is dependent upon  
message length.  
4. At any point while composing a message:  
Create and Send Text Messages  
1. In standby mode, press the Messages shortcut (Down  
To change the text entry mode, press the Left soft key and select  
the desired text entry mode, repeatedly press and hold , or  
navigation) key or press  
, then select Send Message  
press  
page 33.)  
Text Message. The Create Txt Msg screen appears in  
To complete the message text and set message send options,  
press the Options soft key. The following options appear in the  
display:  
the display showing the To: list.  
53  
             
Edit Send To — Edit the recipient’s number or email address.  
Add Quick Text — Insert pre-composed text in your message.  
Save As Draft — Save the message to your Draft folder.  
Receive Messages While in a Call  
When you receive a message while in a call, New Message  
appears in the display along with the closed envelope icon ( ).  
The date and time of the message also appear in the display  
along with the following options:  
Priority Level — Choose High or Normal  
Validity Period — Enter the Date when this message will cease to be  
valid, then use the Left and Right navigation keys to choose the Time  
.
.
View Now — Opens the message, where you have the option to  
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,  
Message Info, or Extract.  
Delivery Ack — Choose On or Off — Requests confirmation when  
your message is received.  
Add To Contacts — Save the recipient’s number or e-mail address as  
a Contacts list entry.  
View Later — Saves the message to your inbox, where you can view  
it later, and returns your phone to call mode.  
5. Once you’re finished entering your message, press SEND  
Select the option of your choice.  
OK  
(
or  
).  
Send Picture Messages in Camera Mode  
Picture messages can be sent to recipients with compatible  
phones or devices. You can even accompany a Picture message  
with a voice memo or preloaded sound.  
Receive Text Messages  
When you receive a message in standby mode, the ringer sounds  
(unless turned off) and New Message appears in the display  
along with the closed envelope icon ( ). The date and time of  
the message also appear in the display along with the following  
options:  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send to field of the  
Picture message composer.  
View Now — Opens the message, where you have the option to  
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,  
Message Info, or Extract.  
1. In standby mode, press and hold the Camera key  
(
). The camera viewfinder screen appears in the  
View Later — Saves the message to your inbox, where you can view  
it later, then returns your phone to standby mode.  
display.  
Select the option of your choice.  
Messaging  
54  
             
2. Using the display as a viewfinder, when the image that you  
8. If you wish to insert a sound into your Picture message,  
use the Down navigation key to highlight the Sound: field  
and do the following; otherwise, proceed to step 10.  
OK  
wish to send appears in the display, press TAKE  
(
or  
) to take a picture.  
Press the Sounds soft key. The My Sounds screen appears in the  
display showing the following options:  
Note: For more information about using the camera feature in your phone,  
Record New — Record a new memo to insert into the message.  
OK  
3. Press Send  
(
or  
) to save the picture and begin  
Note: You can record and insert a voice memo of up to 60 seconds in length,  
if you record first before attaching a picture. If a picture is attached  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
delivery process. The Create Pic Msg screen then appears  
in the display with the Send To: list highlighted.  
4. Enter the phone number or e-mail address of the recipient  
Audio files list — Select from the list of previously recorded voice  
memos and preloaded audio files on your phone.  
OK  
of the Picture message, then press  
or  
.
Select an option to insert a sound into your message.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the Send To: list.  
,
Press or  
to exit the pop-up menu without inserting a sound.  
9. To complete the message text and set message send  
options, press the Options soft key. The following options  
appear in the display:  
5. The Subject: field appears in the display. Enter a subject  
for the Picture message using the keypad. (See See  
Preview — View the picture as the recipient will see it.  
Add Quick Text — Add precomposed text to your message.  
Save As Draft — Save the message to your Draft folder.  
6. Press the Down navigation key until the Text: field is  
highlighted, then enter the message text using the keypad.  
Priority Level — Choose High Normal, or Low.  
,
7. Your new picture appears in the PIC: field.  
55  
Validity Period — Enter the Date when this message will cease to  
be valid, then use the Left and Right navigation keys to choose the  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press , then select Send Message  
Time  
.
Picture Message. The Create Pic Msg screen appears  
in the display with the Send To tab highlighted and  
showing the To: list.  
Delivery Ack — Choose On or Off — Requests confirmation when  
your message is received.  
Remove Pic — Remove the picture from your message.  
Remove Sound — Remove the sound file from your message.  
Tip: To launch the Create Pic Msg screen using a voice command — In  
Add To Contacts — Save the recipient’s number or e-mail address  
as a Contacts list entry.  
standby mode, press and hold  
or  
until the phone prompts,  
Say a command.” Say “Send Picture” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
Select the desired option.  
OK  
10. Press  
or  
to send the message. “Pic Msg  
2. Enter the phone number or e-mail address of the recipient  
Sending” appears in the display and a progress bar  
indicates the send status.  
OK  
using the keypad, then press  
or  
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the To: list.  
,
Send Picture Messages in Standby Mode  
Send Picture messages to recipients with a compatible phone or  
other device, and accompany the Picture message with a voice  
memo, ring tone, or downloaded melody.  
3. The Subject: field appears in the display. Enter a subject  
Text” on page 33 for more information.)  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send To field of the  
Picture message composer.  
4. Highlight the Text: field, then enter the message text using  
information.)  
Messaging  
56  
   
5. Highlight the PIC: field, then press the My PIC soft key. A  
8. Do one of the following:  
photo gallery of thumbnail images appears in the display.  
Select a file from the list of previously recorded voice memos and  
preloaded audio files on your phone.  
6. Do one of the following:  
Select Record New and record a new voice memo, then select the  
new recorded sound file to add it to the message.  
Select a picture to add it to your message.  
To expand the highlighted picture for easier viewing, press the VIEW  
soft key.  
include a new picture by doing the following:  
Note: You can record and insert a voice memo of up to 60 seconds in length,  
if you record first before attaching a picture. If a picture is attached  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
Press the Camera soft key. The Camera viewfinder screen appears.  
OK  
Press TAKE  
(
or  
or  
) to take the picture.  
).  
Press or  
sound.  
to exit the My Sounds screen without selecting a  
OK  
Press SEND  
(
9. Press the Options soft key to complete the message text  
and set message send options. The following options  
appear in the display:  
Note: For more information about using the camera feature in your phone,  
Press or  
a picture.  
to exit the photo gallery screen without selecting  
Preview — View the picture as the recipient will see it.  
Add Quick Text — Add precomposed text to your message.  
Save As Draft — Save the message to your Draft folder.  
You are returned to the Create Pic Msg screen with the  
selected picture in the PIC: field.  
Priority Level — Choose High Normal, or Low.  
,
7. If you wish to insert a sound into your Picture message,  
highlight the Sound: field, then press the Sounds soft key.  
The My Sounds screen appears in the display.  
Validity Period — Enter the Date when this message will cease  
to be valid, then use the Left and Right navigation keys to choose  
the Time  
.
Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
57  
Remove Pic — Remove the picture from your message.  
appears in the display.  
Remove Sound — Remove the sound file from your message.  
2. Select the new message. “Connecting” appears in the  
display followed by “Retrieving” and a progress bar  
indicating that the message is downloading to your phone.  
Add To Contacts — Save the recipient’s number or e-mail  
address as a Contacts list entry.  
Select the desired option and setting.  
3. Once a Picture message has been downloaded to your  
phone, the new Picture message appears in the display. If  
the message includes a sound file, the phone begins  
playing it.  
OK  
10. Press SEND  
(
or  
) to send the message. “Pic Msg  
Sending” appears in the display and a progress bar  
indicates the send status.  
Receive Picture Messages  
Note: For more information on viewing and managing received picture  
When you receive a Picture Message in standby mode, the ringer  
sounds (unless turned off) and New Message appears in the  
display along with the closed envelope icon ( ). The date and  
time of the message also appear in the display along with the  
following options:  
View a Picture Message Now  
1. After you select the View Now option, “Connecting”  
appears in the display followed by “Retrieving” and a  
progress bar indicating that the message is downloading  
to your phone.  
View Now — Retrieves and opens the message, where you have the  
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.  
View Later — Saves the message to your inbox, where you can view  
it later, then returns your phone to standby mode.  
2. After the Picture message has downloaded, an alert  
sounds, and the new Picture message appears in the  
display. If the message includes a sound file, the phone  
begins playing it.  
Select the desired option.  
View a Picture Message Later  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press  
, then select Inbox. The Inbox  
Messaging  
58  
       
3. While viewing your message press the Options soft key.  
Message Boxes  
The following options appear in the display:  
Your phone stores messages in any one of five message boxes.  
The subsections that follow describe each message box in detail.  
Replay — Play the sound file included in the picture message  
again.  
Inbox  
Forward — Send a copy of this message to another recipient.  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press  
, then select Inbox. The Inbox  
Save Sound — Save the sound file included in this message to  
the My Sounds folder.  
appears in the display showing a list of received  
messages.  
Save Pic — Save the picture included in this message to the My  
Images folder.  
Tip: While in a call, press the Options soft key, then select Messages  
.
Save Quick Text — Save the text in this message as a new Quick  
Text.  
2. Highlight the message you wish to view, then press OPEN  
Lock Unlock — Block/permit erasure of the highlighted  
/
message.  
OK  
(
or  
) to view contents of the highlighted message.  
Add To Contacts — Save the sender’s number to your Contacts.  
3. While viewing your message, press the Options soft key.  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
The following options appear in the display:  
Forward — Send a copy of this message to another recipient.  
4. Select an option to perform its function.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
Note: For more information on received picture message options, see  
Save Sound — Picture Messages Only — Save the audio file  
(sound) included in this message to the My Sounds folder.  
59  
       
Save Pic — Picture Messages Only — Save the picture included  
To remove the highlighted message from the Inbox, press the Erase  
in this message to the My Images folder.  
soft key.  
OK  
Save Quick Text — Save the text in this message as a new Quick  
Text.  
To review the highlighted message, press OPEN  
(
or  
).  
For more options, press the Options soft key. The following options  
appear in the display:  
Lock  
/
Unlock — Block/permit erasure of the highlighted  
message.  
Reply — Compose and send a reply message to the originator of the  
received message.  
Add To Contacts — Save the sender’s number to your Contacts.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the original  
message.  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
Extract — Calls the sender of the received message.  
Forward — Send a copy of this message to another recipient.  
4. Select an option to perform its function.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Messages and Lock Mode  
Add To Contacts — Save the sender’s number to your Contacts.  
Erase Inbox — Delete all unlocked messages from the Inbox.  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message appear in the display, but you  
cannot access the message until you enter the lock code.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Select an option to perform its function.  
Managing Inbox Messages  
Outbox  
1. In standby mode, press the Messages shortcut (Down  
Your phone stores messages in the Outbox, regardless of  
whether the message was successfully transmitted. Verify if and  
when a message or e-mail was successfully received by  
enabling the Enh. Delivery Ack/Delivery Ack feature.  
navigation) key or press  
, then select Inbox. The Inbox  
appears in the display showing a list of received  
messages.  
2. Highlight a message in the list, you have the following  
options:  
Messaging  
60  
         
Review Messages in the Outbox  
Managing Outbox Messages  
1. In standby mode, press the Messages shortcut (Down  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press  
, then select Outbox. Your list  
navigation) key or  
, then select Outbox. Your list of  
of sent messages appear in the display.  
sent messages appear in the display.  
2. Highlight a message in the list, you have the following  
2. Highlight a message in the list, you have the following  
options:  
options:  
To remove the highlighted message from the Inbox, press the Erase  
soft key.  
To remove the highlighted message from the Inbox, press the Erase  
soft key.  
OK  
OK  
To review the highlighted message, press OPEN  
(
or  
).  
To review the highlighted message, press OPEN  
(
or  
).  
For more options, press the Options soft key. The following options  
For more options, press the Options soft key. The following options  
appear in the display:  
appear in the display:  
Play Again — Replay the sound file in a Picture message.  
Forward — Send the highlighted message to another recipient.  
Forward — Send the highlighted message to another recipient.  
Resend — Send another copy of the highlighted message to the  
original recipient  
Erase — Delete this message from the Outbox, if the message is  
Unlocked.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Lock  
/
Unlock — Block/permit erasure of the highlighted message.  
Add To Contacts — Save the recipient’s number to your Contacts.  
Save Quick Text — Save the message text as Quick Text for insertion  
into other messages.  
Erase Outbox — Erase all Unlocked messages from the Outbox.  
Message Info — Shows message delivery status, addressee, size,  
Add To Contacts — Save the recipient’s number to your Contacts.  
and so on.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Select an option to perform its function.  
Extract — Calls the originator of the message.  
Select an option to perform its function.  
61  
       
View and Edit Draft Text Messages  
Draft Box  
1. In standby mode, press the Messages shortcut (Down  
Messages in the Draft Box are those that have been composed  
but never sent. You can return to the Draft Box at any time to  
view, edit, or send a draft message.  
navigation) key or  
, then select Drafts. A list of any  
draft messages that you’ve saved appears in the display.  
Create a Draft Message  
2. Highlight a text message that you wish to view or edit, then  
1. In standby mode, press the Messages shortcut (Down  
OK  
press EDIT  
(
or  
). The Create Txt Msg screen appears  
navigation) key or  
, then select Send Message and  
in the display.  
then select one of the following Send Message options:  
3. Enter or change the recipient’s number and/or e-mail  
address and the message text using the keypad. (See  
“Entering Text” on page 33 for more information.)  
Text Message  
Picture Message  
The Create Txt Msg screen or Create Pic Msg screen  
4. To complete the message text and set message send  
options, press the Options soft key. The following options  
appear in the display:  
appears in the display showing the To: list.  
2. Enter the phone Number or E-Mail address of a recipient,  
OK  
then press the  
key.  
Edit Send To — Change, add, or remove recipients from this  
message.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the Send To: list.  
,
Add Quick Text — Insert pre-composed text into your message  
text.  
Save As Draft — Save the message to your Drafts box.  
3. Compose your message using either keypad, press the  
Priority Level — Choose High or Normal  
.
Options soft key, then select Save As Draft. “Message  
Validity Period — Enter the Date when this message will cease  
to be valid, then use the Left and Right navigation keys to choose  
saved” appears in the display and your message is saved  
to the Drafts box.  
the Time  
.
Messaging  
62  
     
Delivery Ack — Choose On or Off — Requests confirmation  
Validity Period — Enter the Date when this message will cease  
when your message is received.  
to be valid, then use the Left and Right navigation keys to choose  
the Time  
.
Add To Contacts — Save the recipient’s number or e-mail  
address to your Contacts.  
Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
5. Select an option to perform its function.  
Remove Pic — Remove image included in draft message.  
6. When you have completed composing your message,  
Remove Sound — Remove sound file included in draft message.  
OK  
press SEND  
(
or  
) to send it.  
Add To Contacts — Save the recipient’s number or e-mail  
address to your Contacts.  
View and Edit Draft Pic. Messages  
4. Select an option to perform its function.  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or  
, then select Drafts. A list of any  
5. When you have completed composing your message,  
draft messages that you’ve saved appears in the display.  
OK  
press SEND  
(
or  
) to send it.  
2. Highlight the picture message that you wish to view, then  
Managing Draft Messages  
OK  
press EDIT key ( or  
). The Create Pic Msg screen  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or , then select Drafts. A list of any  
appears in the display.  
3. Make any needed changes and press the Options soft key.  
draft messages that you’ve composed appears in the  
display.  
The following options appear in the display:  
Preview — Shows the message contents.  
2. Highlight a message, then do one of the following:  
• Add Quick Text — Insert pre-composed text into your message  
text.  
To remove the highlighted message from the Drafts box, press the  
Erase soft key.  
Save As Draft — Saves the changed message to the Draft Box.  
Priority Level — Choose High Normal, or Low  
,
.
63  
 
To access other options, press the Options soft key. The following  
2. Follow the voice prompts to access your voicemail  
options appear in the display:  
messages.  
Send — Send the highlighted message to the number or e-mail  
Listen to Voicemail Later  
address currently included with the message.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
If you have chosen to review your voicemail messages at a later  
time:  
Add To Contacts — Save the recipient’s number and/or e-mail  
address to your Contacts.  
1. In standby mode, press the Messages shortcut (Down  
Save Quick Text — Save the message text as Quick Text for insertion  
into other messages.  
navigation) key or  
, then select Voicemail. The  
Voicemail screen appears in the display, showing the  
number of new voicemail messages received and the date  
and time the latest message was received.  
Erase Drafts — Delete all unlocked draft messages.  
Select an option to perform its function.  
Voicemail  
Messages in your voice mailbox are logged in the Voicemail box  
of the Messages menu. Open the Voicemail box to view the  
details of the Voicemail message.  
Tip: You can also access your voicemail from standby mode, by pressing and  
holdolding  
or  
to speed call your voice mailbox.  
2. Follow the voice prompts to access your voicemail  
When you’re notified of a new voicemail message by an alert  
tone and the new message icon, the following options pop:  
messages.  
Listen Now — Calls your voice mailbox and lets you listen to your  
messages.  
Erase Messages  
You can erase all of the messages in any or all of message boxes  
usin one convenient sub-menu.  
Listen Later — Returns you to standby mode where you can choose  
to call your mailbox and review your messages at a later time.  
Listen to Voicemail Now  
1. In standby mode, select Listen Now in the New Voicemail  
pop-up. Your phone automatically calls your voice mailbox.  
Messaging  
64  
           
General Message Settings  
1. In standby mode, press the Messages shortcut (Down  
Note: This function erases all messages in the selected message box. To  
delete a single message, go to the respective message box, highlight  
the message, and press the Erase soft key. (For more information, refer  
navigation) key or press  
, then select Msg Settings ➔  
General. The following options appear in the display.  
Auto Save — Choose whether your messages are saved  
automatically when you exit them (On Off Prompt).  
1. In standby mode, press the Messages shortcut (Down  
,
,
navigation) key or press  
, then select Erase  
Auto Erase  
Choose to receive (On) or not receive (Off) a  
Messages. The following options appear in the display:  
warning message when you delete a message.  
Inbox — Deletes all unlocked messages stored in the Inbox.  
Outbox — Deletes all unlocked messages stored in the Outbox.  
Drafts — Deletes all unlocked messages stored in the Drafts box.  
Quick Text — Edit your pre-composed messages, which can then  
be inserted into new messages.  
Voicemail # — Edit or view your Voicemail number.  
Entry Mode — Choose the default method for entering text into  
All Messages — Deletes all unlocked messages stored in all of  
the message boxes, except Voicemail.  
messages (T9 Word Abc, ABC, 123).  
,
Callback # — Choose whether to include a callback phone  
number with your outgoing messages, and enter the number to be  
included.  
2. Select the message box containing the messages you  
want to delete. You’re prompted to confirm the erasure of  
all messages in the selected box or in all boxes.  
Signature — Choose whether to include a text signature in  
outgoing message text, and enter the text to be included.  
3. To delete the messages, press the Yes soft key. To cancel  
Reminder — Select whether and how often you will hear and/or  
deleting the messages, press the No soft key.  
feel a reminder that you have received a message (Once Every 2  
,
Message Settings  
Minutes Every 15 Minutes, Off).  
,
2. Select the desired option, then select the desired setting or  
Use the Msg Settings sub-menus to define settings for general,  
text, and picture messages.  
enter the desired value.  
65  
       
Editing and Entering Quick Text  
Text Message Settings  
1. In standby mode, press the Messages shortcut (Down  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press  
, then select Msg Settings ➔  
navigation) key or press  
, then select Msg Settings ➔  
General Quick Text. The Quick Text sub-menu  
Text Message. The following options appear in the  
appears in the display.  
display.  
Auto View — On/Off — With Auto View On, the full content of a  
2. Select a Quick Text you want to change.  
text message appears in the display as the messages is received.  
Note: You cannot change the pre-defined Quick Text included with your  
Signature — Create a signature, which can be included at the  
bottom of outgoing message text.  
phone.  
Auto Scroll — On/Off — With Auto Scroll On, the full content of a  
text message automatically rolls upward on the display, one screen-  
full at a time.  
3. To create a new Quick Text, press the New soft key.  
Tip: You can also create new Quick Text by viewing/editing an Outbox  
message and using the Save Quick Text option in the Options menu. See  
2. Select the desired option, then select the desired setting or  
enter the desired value.  
4. Enter/change the text content of your Quick Text using  
information.)  
Picture Message Settings  
1. In standby mode, press the Messages shortcut (Down  
navigation) key or press  
, then select Msg Settings ➔  
OK  
5. To save your finished Quick Text, press  
or  
. The  
Picture Message. The following options appear in the  
Quick Text menu appears in the display with your new  
display.  
Quick Text highlighted.  
Auto Receive — On/Off — With Auto Receive On, Picture  
messages automatically download and display as they are  
received. With Auto Receive Off, you are prompted to download  
Picture messages.  
Messaging  
66  
         
Signature — Create a signature, which can be included at the  
bottom of outgoing Picture message text.  
• Reply — Select type of message to be sent (TXT Message or  
Picture Message) when you reply to Picture messages.  
2. Select the desired option, then select the desired setting or  
enter the desired value.  
67  
Section 9: MetroWEB  
This section outlines how to launch MetroWEB, how to navigate  
to other pages on the web, and how the keys on the QWERTY  
keypad are used with the web application. Additionally, links to  
other sites are briefly discussed.  
2. In standby mode, do one of the following to launch  
MetroWEB:  
Press  
.
– Or –  
Press  
MetroWEB  
, then select MetroWEB  
MetroWEB.  
With MetroWEB, you can conveniently surf the web and  
download ringtones and wallpapers using your phone. Each time  
you launch MetroWEB, your phone connects to the Internet and  
3. A list of categories (each representing one or more web  
sites) appears in the display.  
4. Use the arrow keys to browse the categories.  
the service indicator icon (  
) appears in the display.  
Stored Web Content  
5. Once the desired category is highlighted, press the  
soft key to enter the category list.  
MetroWEB ends an Internet connection after a certain period of  
inactivity, however some information from your session remains  
stored in the phone (if you leave your phone turned on). You can  
access this information without reconnecting to the Internet.  
However, if you are viewing stored information, and you select a  
link to a site that was not accessed in your last session, you  
automatically re-connect to the Internet.  
Exit MetroWEB  
To exit MetroWEB, press  
or close the QWERTY  
keypad.  
Using MetroWEB  
When you use MetroWEB, some of the keys operate differently  
than during a normal phone call. MetroWEB presents on-screen  
items in any of the following ways:  
Launching MetroWEB  
1. Open the QWERTY keypad.  
Text or numeric input.  
Note: MetroWEB is only accessible using the QWERTY keypad.  
Links (embedded in content).  
MetroWEB  
68  
             
Numbered options (some may not be numbered).  
Simple text.  
SHIFT Key — Press before entering text to enable  
uppercase characters.  
Spacebar — Press to insert a space when entering  
text.  
You can act upon options or links by using the soft keys.  
MetroWEB soft keys  
Number 1 thru 0 — Use the number keys to select  
items in a menu if they are numbered.  
At the bottom of the MetroWEB display is a bar that contains  
browser commands. The Left and Right (  
) soft keys on  
the keypad are used to execute the commands that appear in  
their respective corners of the display. These are called “soft  
keys” because their functions change depending on the  
application.  
End Key — Press to exit the MetroWEB and return  
the phone to standby mode.  
Left Soft Key — Press to activate the command that  
appears above it in the display.  
Using Links  
Right Soft Key — Press to activate the command  
that appears above it in the display.  
Links have several purposes, such as jumping to a different  
page, to a different site, or even initiating a phone call. Links are  
shown inside of brackets ([ ]). You can normally use the Left soft  
key ( ) to select a link when it is highlighted.  
How MetroWEB Keys Work  
The following table lists MetroWEB keys and their functions.  
Arrow keys — Use to browse lists and options.  
Back Key — Press once to back up one page. Press  
and hold to go back to home page.  
Press once to clear the last number, letter, or symbol  
entered. Press and hold to completely clear the entry.  
69  
       
Section 10: Voice SVC  
This section explains how you can use and customize your  
phone’s VoiceSignal voice recognition feature.  
Say a Command” appears in the display and plays through the  
earpiece, followed by a list of available commands.  
OK  
In standby mode, press  
Command  
or  
, then select Voice SVC  
Voice  
Voice SVC Options  
.
Your SCH-r450 includes VoiceSignal, state-of-the-art voice  
recognition software that lets you use your voice to dial numbers,  
access your Contacts list, and open Tools. To access your  
phone’s voice recognition, do the following:  
Note: You can also set your phone to start VoiceSignal when you connect an  
optional headset to the phone. (For more information, see “Voice  
OK  
1. In standby mode, press  
or  
, then select Voice SVC.  
The following voice commands appear in the display:  
The following options appear in the display:  
Call — Lets you dial the phone by saying any name stored in your  
Contacts list, without ever having to record, or “train” that name.  
VoiceSignal automatically voice-activates all your Contacts, even if you  
have hundreds of them stored on your phone. You can also dial any  
telephone number, even if it is not stored in your Contacts list, by  
saying the digits in the number. (See “Voice Dialing” on page 22 for  
more information.)  
Voice Command — Lets you place calls, access your Contacts  
List, review your appointments, and more by speaking commands  
“Voice Method” on page 38 for more information.  
Voice Settings — Lets you tailor VoiceSignal to better respond to  
your voice and your phone use preferences. See “Digit Dialing”  
on page 72 for more information.  
Send Text — Lets you access Create Text Message.  
Send Picture — Lets you access Create Picture Message.  
Lookup — Lets you find a Contact by name and review the Contact’s  
information.  
2. Select the desired sub-menu.  
Voice Command  
To access the Voice Command menu, do one of the following:  
In standby mode, press and hold  
or  
.
Voice SVC  
70  
       
Go to — Lets you access the following list of your phone’s features  
and functions:  
Voice Settings  
To access the Voice Settings menu:  
Contacts  
Calls  
OK  
In standby mode, press  
or  
, then select Voice SVC  
Voice Settings.  
Messages  
MetroWEB  
@metro  
VoiceSVC  
Multimedia  
Tools  
Choice Lists  
When VoiceSignal cannot recognize a name or number, it  
displays a choice list of up to three possible choices, and  
prompts you to confirm the correct one.  
Settings  
You can select how VoiceSignal will use choice lists with name  
dialing, digit dialing, and Contacts.  
Check — Lets you say a single command (such as “Status”) to verify  
your phone's: Status Signal Network Battery, or My phone #  
,
,
,
.
To change the way VoiceSignal uses choice lists:  
1. From the Voice Settings menu, select Choice Lists. The  
following options appear in the display:  
Note: Speaking clearly, say the command that you want to use. If VoiceSignal  
does not recognize a command, it prompts you to repeat the  
command. If VoiceSignal still does not recognized the command, it  
tells you “Sorry, no match found” and cancels voice recognition.  
Automatic — VoiceSignal displays a choice list only when it is not  
sure if it has correctly recognized the name or number.  
Voice Command Tips:  
Always On — VoiceSignal always displays a choice list, even  
when there is only one choice.  
Make sure you wait for the beep before speaking.  
Always Off — VoiceSignal never displays a choice list.  
Speak clearly at a normal volume, as if you were talking on the phone.  
2. Select a new setting or press or  
to return to the  
Voice Settings menu.  
71  
     
Tips for Adapting Digit Dialing  
Sensitivity  
Use Adapt Digits in a quiet place.  
1. From the Voice Settings menu, select Sensitivity.  
Make sure you wait for the beep before starting to speak.  
Speak clearly, and say each digit distinctly.  
2. Use the Up and Down navigation keys to adjust the  
selected Sensitivity setting incrementally between Reject  
More spoken commands or names and Reject Less  
spoken commands or names.  
If you make a mistake while recording a sequence of digits, or if there  
is an unexpected noise that spoils the recording, re-record that  
sequence.  
Only adapt digits if you are regularly having problems with digit dialing.  
Once you adapt, digit dialing will not work as well for other people  
using your phone. (You can always reset digit adaptation to its original  
state, as described below.)  
OK  
3. Press  
or  
to accept the new setting. Press or  
to discard the new setting and return to the Voice  
Settings menu.  
Digit Dialing  
Adapt Digits  
If you regularly have trouble with VoiceSignal not recognizing the  
numbers you speak, try adapting digit dialing to your voice.  
Adapting can improve the accuracy of digit recognition,  
especially for people with strong regional accents.  
To adapt digit dialing, do the following:  
1. From the Voice Settings menu, select Digit Dialing. The  
following options appear in the display:  
Adapt Digits  
Reset Digits  
Note: After you adapt Digit Dial, your phone is customized to your voice, and  
your voice only. Others will not be able to use it unless they reset the  
phone to factory defaults.  
2. Select Adapt Digits. Your phone displays text describing  
the Adapt Digits process.  
Adaptation involves recording several sequences of four digits  
each. The recording process takes about a minute.  
OK  
3. Press  
or  
. Your phone displays the first digit  
sequence and “Please say” plays through the speaker  
followed by the four digits appearing in the display.  
Voice SVC  
72  
   
4. Wait for the beep and say the digits using your normal tone  
of voice. After a moment, the phone plays back the  
Adapt Digits  
Reset Digits  
2. Select Reset Digits. The phone prompts you to confirm  
recording and prompts “Did the recording sound ok?”  
digit rest.  
If the recording was good, say “Yes.”  
If you need to re-record, say “No.”  
3. Press the OK soft key to reset your digit adaptation, or  
If you say “No,” the phone prompts you to pronounce the  
press the Back soft key to cancel.  
digits again. Wait for the beep and then say the digits.  
Sound  
Repeat this step until you’re satisfied with the recording.  
Sound lets you specify what (if any) text prompts you want your  
phone to read to you through the earpiece.  
5. After confirming that the recording sounds “ok”, continue  
1. From the Voice Settings menu, select Sound. The following  
the recording process with the next set of digits.  
options appear in the display:  
6. After 10 sets of digits, the phone asks whether you want to  
Prompts — On/Off — Enables or disables audio prompts.  
Digits — On/Off — Enables or disables digit playback.  
Names — On/Off — Enables or disables name playback.  
do more adaptation. Answer “Yes.”  
7. Repeat steps 4 and 5 for another 10 sets of digits. After the  
second group of 10 sets of digits, “Adaptation complete”  
plays through the speaker and you are returned to the  
Digit Dialing menu.  
Name Settings — Lets you adjust the Speed  
(
Faster or Slower  
)
and Volume  
(Louder or Softer) of your phone’s audio name  
playback.  
2. Select the desired option and the desired setting, or  
Reset Digits  
OK  
3. Press  
or  
to accept the new setting. Press or  
To reset digit dialing to factory default settings, do the following:  
1. From the Voice Settings menu, select Digit Dialing. The  
following options appear in the display:  
to discard the new setting and return to the Sound  
menu.  
73  
 
Voice Launch  
To set the key or action that launches VoiceSignal, do the  
following:  
1. From the Voice Settings menu, select Voice Launch. The  
following options appear in the display:  
Key Only — Press and hold  
for one call.  
or  
to activate VoiceSignal  
Key/EarMic — Attach a headset to your phone. Press and hold  
or or press and hold the button on the headset to  
activate VoiceSignal.  
OK  
2. Press  
or  
to accept the new setting. Press or  
to discard the new setting and return to the Voice  
Settings menu.  
About  
This option causes the About VoiceSignal screen to appear in  
the display, showing version and build information about the  
VoiceSignal software included on your phone.  
From the Voice Settings menu, select About.  
The About VoiceSignal screen appears in the display  
showing the version level of the VoiceSignal software  
currently installed on your phone.  
Voice SVC  
74  
     
Section 11: Multimedia  
Use your SCH-r450 phone to take full color digital pictures,  
display them on your phone’s vivid color display, and instantly  
share them with family and friends.  
The message “Loading...” followed by a camera  
viewfinder screen appears in the display. (See “Camera  
With Mobile Shop, you can download personalized ringtones,  
pictures, and more. For more information, contact your  
Wireless Carrier.  
OK  
Note: You can also activate the camera (from standby mode) by pressing  
or  
, then select Multimedia  
Camera.  
2. Point the camera lens at your subject.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
OK  
3. Using the display as a viewfinder, press TAKE  
(
or  
)
when the image that you wish to capture appears in the  
display. You have the following options:  
Camera  
Taking Pictures  
To save the picture to the Image gallery in your phone (a part of the  
phone’s memory devoted to storing, browsing, and viewing saved  
pictures), press the Save soft key.  
Taking pictures with the built-in camera is as simple as choosing  
a subject, pointing the lens [located on the outside of the folder  
(above the external display)], and pressing a button.  
To save the picture and include it in a Picture message, press Send  
OK  
(
or  
Simple Snap Shot  
Mode” on page 54 for more information.)  
To take a single picture using the current camera settings, do the  
following:  
To erase the photo, press the Erase soft key.  
Tip: You can change a number of the camera’s settings to suit particular uses  
information.)  
1. In standby mode, press and hold the Camera key  
(
) on the right side of the phone.  
75  
           
Camera Screen Icons  
Camera Screen  
Camera — Indicates that your phone is in Camera  
mode.  
When you activate your phone’s  
camera, the second line of the  
display is reserved for the current  
camera resolution setting and the  
picture counter. The center of the  
display shows a viewfinder image  
of the subject at which the camera  
is pointed. The soft key labels on  
the bottom line of the display  
change to the following:  
Night Shot — Replaces the Camera icon. Indicates  
that your phone is ready to take photos in low light.  
Resolution — Indicates the current Resolution  
setting (240x320 and 320x240 shown).  
Brightness — Indicates the current photo Brightness  
setting [0 (no Brightness) shown]. The direction  
arrows indicate that the Up and Down navigation  
keys adjust the Brightness setting.  
My Images — Pressing the  
Left soft key ( ) opens  
Zoom — Indicates the current Zoom setting [0 (no  
Zoom) shown]. The direction arrows indicate that the  
Left and Right navigation keys adjust the Zoom  
setting.  
the My Images gallery so  
you can view or manage  
your stored pictures.  
Memory Counter — Indicates the maximum number  
of photos you can take at the current Resolution and  
Quality settings.  
TAKE — Pressing the OK  
OK  
key (  
)
takes a picture of  
the image currently  
Quality — Indicates the current photo Quality setting  
(Fine shown).  
appearing on the display.  
Options — Pressing the Right soft key (  
of camera settings.  
) opens a pop-up menu  
White Balance — Indicates the current photo White  
Balance setting (Auto shown).  
Multimedia  
76  
       
Self Timer — Delays the camera shutter by either 2,  
Note: The Zoom setting is affected by the Resolution setting (camera mode).  
OK  
5, or 10 seconds after you press Take  
(
or  
).  
With Resolution set to 960x1280, no zoom is available. With Resolution  
set to 480x640 and lower, Zoom settings  
0
8
are available.  
Multi Shot — Automatically takes  
multiple pictures in sequence after  
1. In camera mode, press the Left and Right navigation/arrow  
OK  
you press Take  
(
or  
).  
keys to zoom in and out on your subject.  
Camera Shortcuts  
OK  
2. Press Take  
(
or  
) to take the picture.  
You can use the Navigation key or the Arrow keys to quickly  
access both the Brightness and Zoom capabilities of the built-in  
camera. When you exit the camera mode, all camera settings  
return to default values.  
Camera Options  
The Camera Options let you temporarily override your default  
camera settings. Any settings you change using the Camera  
Options only apply to the current camera session or until you  
make another change using the Camera Options.  
Brightness  
1. In camera mode, change the brightness of your pictures  
using the Up and Down navigation/arrow keys. Options are  
+4 – -4.  
Delay Pictures with the Self Timer  
Self Timer lets you delay a picture long enough so you or the  
person taking the picture can join others in the picture.  
OK  
2. Press Take  
(
or  
) to take the picture.  
1. In camera mode, press the Options soft key. The following  
Zoom in on a Subject  
options appear in the display:  
Your camera has digital zoom capabilities of up to x with  
Resolution set to 480x640 and below.  
8
Self Timer  
Multi Shot  
Quality  
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal  
result of digital enhancement.  
Resolution  
White Balance  
77  
                     
Color Effects  
Settings  
On (3 pictures taken in succession).  
3. Select the desired option. The Multi Shot icon  
2. Highlight Self Timer. The following available values appear  
(
) appears in the display.  
in the display:  
OK  
The next time you press Take  
(
or  
), the camera  
Off  
takes several pictures in rapid succession.  
2 Seconds  
5 Seconds  
10 Seconds  
Quality  
1. In camera mode, press the Options soft key. The options  
menu bar appears in the display.  
3. Select the desired delay. The camera screen appears in the  
2. Highlight Quality. The following available values appear in  
display.  
the display:  
OK  
The next time you press Take  
(
or  
), a countdown  
Fine  
timer appears in the display that indicates the time  
remaining before the camera takes the picture.  
Normal  
Economy  
Multi Shot  
3. Select the desired picture Quality value. The camera  
Multi Shot lets you take multiple pictures in succession when you  
applies the selected Quality value to your next picture.  
OK  
press Take  
(
or  
).  
Resolution  
1. In camera mode, press the Options soft key. The options  
1. In camera mode, press the Options soft key. The options  
menu bar appears in the display.  
menu bar appears in the display.  
2. Highlight Multi Shot. The following options appear in the  
display:  
Off  
Multimedia  
78  
   
2. Highlight Resolution. The following available values  
Fluorescent — Use this setting when taking pictures under  
fluorescent lights.  
appear in the display:  
3. Select one of the White Balance available values. The  
camera applies the selected White Balance value to your  
next picture.  
• 960x1280  
• 480x640  
• 240x320  
Color Effects  
• 120x160  
3. Select the desired Resolution value. The camera applies  
the selected Resolution value to your next picture.  
Color Effects lets you change your pictures from full-color to two-  
color, (black plus a color you select).  
1. In camera mode, press the Options soft key. The options  
White Balance  
menu bar appears in the display.  
White Balance allows you to adjust picture quality according to  
available light.  
2. Highlight Color Effects. The following Color Effects  
available values appear in the display:  
1. In camera mode, press the Options soft key. The options  
Normal (full-color)  
Black&White (monochrome)  
Sepia  
menu bar appears in the display.  
2. Highlight White Balance. The following White Balance  
available values appear in the display:  
Negative  
Auto — The camera automatically adjusts picture quality to  
available light.  
• Green  
3. Select the desired Color Efect. The camera applies the  
selected Color Tone setting to your next picture.  
Sunny — Use this setting when taking pictures in full sun.  
Cloudy — Use this setting when taking pictures in cloudy  
conditions.  
Tungsten — Use this setting when taking pictures under  
incandescent lights.  
79  
Camera Settings  
2. Highlight Settings, then select Shutter Sound. The  
following settings appear in the display:  
Camera Settings (unlike other Camera Options) do not return to  
their respective default values when you end the current Camera  
session. Instead, Camera Settings apply to future Camera  
sessions until you change individual Settings values or until you  
use Reset Settings.  
OK  
Off — No Shutter Sound plays when you press Take  
(
or  
).  
• Shutter  
• OK  
• Ding Dong  
Memory  
3. Select the desired Shutter Sound (each sound plays as it is  
highlighted) setting. The camera applies the selected  
Shutter Sound setting to your next picture.  
1. In camera mode, press the Options soft key. The options  
menu bar appears in the display.  
2. Highlight Settings, then select Memory. The following  
Reset Settings  
Memory settings appear in the display:  
1. In camera mode, press the Options soft key. The options  
menu bar appears in the display.  
• Phone — Stores pictures in phone memory.  
• Card — Stores pictures on an optional microSD™ Memory Card.  
3. Select the memory location of your choice. You’re returned  
to the camera viewfinder screen.  
2. Highlight Settings, then select Reset Settings. The following  
options appear in the display:  
Off — Keeps the current camera settings.  
Shutter Sounds  
On — Resets the camera settings to default values.  
Choose from three different sounds whenever you take a picture.  
Aside from being a cool sound effect, Shutter Sounds acts as an  
audible reminder that your camera has taken the picture.  
3. Select the desired option.  
Night Shot  
1. In camera mode, press the Options soft key. The options  
Night Shot lets you take pictures in low light without a flash.  
menu bar appears in the display.  
Multimedia  
80  
   
2. Highlight an image or photo. You have the following  
Note: To avoid blurred pictures when taking Night Shots, hold your phone  
OK  
options:  
very steady for two seconds after pressing Take  
(
or  
).  
To take new photos, press the Camera soft key.  
1. In camera mode, press the Options soft key. The options  
OK  
To expand the highlighted image to fill the screen, press VIEW  
(
menu bar appears in the display.  
or  
).  
2. Highlight Settings, then select Night Shot. The following  
To access other options, press the Options soft key. The following  
options appear in the display:  
settings appear in the display:  
Send — Send to someone as part of a Picture message. (See “Send  
information.)  
Off  
On  
Set As — Lets you set the highlighted image as the Main Wallpaper  
or as a Picture ID for one of your Contacts.  
3. Select the Night Shot setting of your choice. You’re  
returned to the camera viewfinder screen.  
Rename — Change the file name for the highlighted image.  
Using My Images Gallery  
Copy — Copy images between phone memory and optional Memory  
Card.  
My Images lets you manage your photos and pictures you  
download, and lets you choose the pictures that appear in your  
phone’s display when you turn it on or off, while in standby mode  
(wallpaper), and as image IDs for your contacts.  
OK  
Move Transfer the highlighted image between phone memory and  
optional Memory Card.  
Lock Unlock — Block/permit erasure of the highlighted image.  
/
Erase — Erase the highlighted image.  
1. In standby mode, press  
or  
, then select  
Erase All — Erase all unlocked images from My Images.  
Multimedia My Images. A multiple-page matrix of  
thumbnail views of saved photos and images appears in  
the display.  
Photo Info — Shows the image file’s name, date and time, resolution,  
and size.  
Select the desired option and a desired value.  
81  
     
3. To return to the previous menu, press or  
. To return  
• Artists — Lists artist names for music files on the Memory Card  
and lets you play one or more music files by a selected artist.  
to standby mode, press  
.
• Albums — Lists album titles for music files on the Memory Card  
and lets you play one or more music files from a selected album.  
Using Your Music Player  
Music Player lets you play MP3 and unprotected AAC, AAC+,  
WMA music files, loaded onto an optional microSD™ Memory  
Card using a personal computer. (For information on loading  
• Genres — Lists music categories for music files on the Memory  
Card and lets you play one or more music files of a particular music  
category.  
• Playlists — Lists any playlists you have saved and lets you create,  
save, and manage playlists.  
3. Use the Navigation key or Arrow keys to highlight a music  
Launching the Music Library Menu  
file, then:  
OK  
1. In standby mode, press  
or  
, then select  
To play the file, press the Play soft key.  
Multimedia Music Player.  
OK  
To select the file for playing or other options, press MARK  
(
).  
– Or –  
To select and apply any of the following options to the highlighted or  
marked music file(s), press the Options soft key:  
On the Music Player screen, press the Library soft key.  
Mark All — Marks all listed music files for playing, removal, or  
assignment of player settings.  
2. The Library menu appears in the display showing the  
following options:  
Remove — Deletes highlighted or marked music file(s) from the  
Memory Card.  
• Now Playing — Music Player mode only — Indicates number of  
music files currently playing. Select this option (or press the Back  
soft key) to return to the Music Player screen.  
Properties — Lists the title, artist, album, genres, copyright  
information, time length, file size, and bit rate of the highlighted music  
file.  
• All — Lists all music files on the Memory Card and lets you play  
individual music files or play multiple music files by creating a  
temporary music playlist.  
Player Settings — Lets you assign a particular Visualizer to  
highlighted or marked music file(s).  
Select the desired option.  
Multimedia  
82  
     
Playing Music  
Use the Navigation key to highlight a music file, then press the Play soft  
key to play the file.  
1. At the Multimedia menu, select Music Player. The Library  
screen appears in the display, showing the following  
options:  
The Music Player screen appears in the display and the  
selected music file/playlist begins playing.  
Music Player Controls  
• All  
Volume key:  
• Artists  
To play a music file louder, press the  
Volume key Up.  
To play a music file softer, press the  
Volume key Down.  
• Albums  
• Genres  
• Playlists  
Navigation key  
:
2. Highlight the desired option,  
To pause/resume playing a music file,  
OK  
press VIEW  
(
), and then do  
OK  
press  
.
one of the following:  
To stop playing a music file, press the  
Down navigation key.  
To skip play to an earlier music file in the selected list, press the Left  
navigation key.  
To skip play to a later music file in the selected list, press the Right  
navigation key.  
To return to the selected list and choose another music file to play,  
press the Up navigation key.  
• All option — Highlight a music  
file, then press the Play soft key  
to play the file.  
Tip: To play additional files, use the Left  
and Right navigation keys, or highlight  
and mark additional files for playback.  
(For more information, see  
Library soft key — Returns you to the Library screen.  
Options soft key — Shows the following sub-menus and options:  
• Other options — Use the Navigation key to highlight an Artist,  
Album, Genre, or Playlist, then press VIEW  
OK  
(
).  
83  
Play Mode — Lets you change the play mode from Normal, Shuffle,  
Repeat One, Repeat All, or Shuffle Repeat All.  
Add to Playlist — Moves you to the Playlists menu to let you add the  
selected music file to a playlist.  
When the Memory Card icon (  
the Memory Card from your phone. (For more information, see  
) appears in the display, remove  
2. Insert the Memory Card into a compatible card reader.  
Remove — Deletes the selected music file from the Memory Card  
Properties — Lists the title, artist, album, genre, copyright  
information, time length, file size, and bit rate of the highlighted music  
file.  
Visualizer — Lets you change the Music Player visualization to Simple  
View, Equalizer, Album Art, or Lyrics.  
Note: Card readers vary. Follow the installation instructions included with  
your card reader and personal computer.  
3. Open the Memory Card reader drive and the “My_Music”  
folder.  
Memory Info — Displays the Memory Usage screen which lists  
Memory Card usage and availability amounts.  
4. Drag or download music (MP3) files into the “My_Music”  
folder.  
Select the desired option to launch the option or to access the sub-  
menu.  
5. Remove the Memory Card by following the removal  
instructions for the Memory Card reader and for your  
personal computer.  
Loading Music Files  
To transfer music to a microSD™ Memory Card, do the  
following:  
6. Insert the Memory Card into your phone. (For more  
1. Before loading music files on a Memory Card, do the  
following:  
Using My Ringtones Gallery  
With your phone powered off, insert the Memory Card into your  
phone. (For more information, see “Install a Memory Card” on  
My Ringtones lets you assign ringtones for calls, alarms, and  
other alerts.  
OK  
1. In standby mode, press  
or  
, then select  
Power your phone on.  
Multimedia My Ringtones. A list of ringtones appears  
Multimedia 84  
     
in the display.  
2. When you select Record  
New, the Record New  
screen appears in the  
display.  
2. Highlight a ringtone. You have the following options:  
To assign the highlighted ringtone to be used as a Ringtone, a  
Contact ID, or an Alert Tone, press the Set As soft key.  
OK  
To hear the ringtone, press PLAY  
(
or  
).  
To start recording a voice  
OK  
memo, press REC  
(
or  
To show title and file type for the highlighted ringtone, press the Info  
).  
soft key.  
To pause/resume recording,  
press the Pause soft key.  
3. To return to the previous menu, press or  
. To return  
to standby mode, press  
.
To stop recording and save the  
Using My Sounds Gallery  
OK  
voice memo, press SAVE  
(
or  
).  
3. When you highlight a saved voice memo file, you have the  
My Sounds lets you record and manage voice memo files and  
assign melodies as ringers or alerts.  
following options:  
OK  
1. In standby mode, press  
or  
, then select  
To erase the selected voice memo file, if it is unlocked, press the  
Erase soft key.  
Multimedia My Sounds.  
The following options appear in the display:  
OK  
To listen to the voice memo, press PLAY  
(
or  
).  
Press the Options soft key, and the following options appear in the  
display:  
Record New — Lets you record voice memos.  
A list of recorded voice memo files and melodies.  
Send — Send to someone as part of a Picture message. (See “Send  
information.)  
Set As — assign the highlighted ringtone to be used as a Ringtone  
Contact ID, or as the Alert Tone  
Rename — Change the name of the voice memo file.  
,
.
85  
   
Lock Unlock — Block/permit erasure of the highlighted image.  
/
Erase all — Erase all unlocked voice memos.  
Sound Info — Shows the title, size, type, and date for the file.  
4. When you highlight a melody file, you have the following  
options:  
OK  
To hear the ringtone, press PLAY  
(
or  
).  
Press the Options soft key to show the following options:  
Send — Send to someone as part of a Picture message. (See “Send  
information.)  
Set As — assign the highlighted ringtone to be used as a Ringtone  
,
Contact ID, or as the Alert Tone  
.
Erase all — Erase all unlocked melodies.  
Sound Info — Shows the title, size, type, and date for the file.  
5. To return to the previous menu, press or  
to standby mode, press  
. To return  
.
Multimedia  
86  
Section 12: Tools  
This section explains how you can use your phone’s Personal  
Information Manager (PIM) functions to view today’s calendar,  
schedule appointments, set an alarm, perform simple math  
calculations, and more.  
Turn Bluetooth On/Off  
When the Bluetooth is turned on, you can use the Bluetooth  
features available. When the Bluetooth is turned off, you cannot  
send or receive information via Bluetooth. To save battery life or  
in situations where Bluetooth use is prohibited, such as airline  
traveling, you can turn off the Bluetooth wireless technology  
headset.  
Accessing Your Phone’s Tools  
To launch the Tools menu:  
OK  
In standby mode, press  
or  
, then select Tools. The  
To turn Bluetooth support on:  
Tools menu appears in the display.  
From the Tools menu, select Bluetooth Bluetooth  
Bluetooth  
Settings Enable.  
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection.  
Bluetooth set to on” and the black Bluetooth On icon  
(
) appear in the display.  
Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of  
one another, you can exchange information between them, even  
if they are located in different rooms.  
To turn Bluetooth support off:  
From the Tools menu, select Bluetooth Bluetooth  
Settings Disable.  
Bluetooth set to off” appears in the display and the and  
The Bluetooth wireless technology settings menu provides the  
ability to view and change the device name, show the visibility,  
and set the security for the device.  
the black Bluetooth On icon ( ) disappears.  
87  
             
OK  
Add New Device  
6. Press PAIR ( or  
) to pair the selected device with the  
phone. You are prompted to enter the passkey or PIN for  
the selected device.  
To search for available Bluetooth devices:  
1. From the Tools menu, select Bluetooth. The following  
options appear in the display:  
OK  
7. Enter the device passkey or PIN and press  
or  
. Pop-  
up messages appear to inform you that pairing with the  
device is complete and prompting you to connect with the  
device.  
Add New Device  
Registered List  
Bluetooth Settings  
2. Select Add New Device.  
8. To connect with the device, press the Yes soft key. To  
return to the Bluetooth menu without connecting to the  
device, press the No soft key.  
If Bluetooth is off, you are prompted to “Turn bluetooth  
on?”. Press the Yes soft key to turn Bluetooth on.  
Registered List  
Note: To leave Bluetooth off and return to the Bluetooth sub menu, press the  
No soft key.  
This menu provides a list of  
Bluetooth wireless technology  
devices discovered by your handset.  
Place device you are connecting to in discoverable  
mode” appears in the display.  
From the Tools menu, select  
Bluetooth Registered List.  
A list of registered Bluetooth  
devices appears in the display.  
3. Place the Bluetooth device in discoverable mode. (See the  
device user manual for more information.)  
OK  
4. Press OK  
(
or  
). Names of the available devices  
appears in the display.  
5. Use the navigation keys to highlight the device you want to  
pair with your phone.  
Tools  
88  
Connecting to a Bluetooth Device  
Bluetooth Settings  
1. From the Registered List, highlight the device and press  
To access Bluetooth settings:  
OK  
or  
.
From the Tools menu, select Bluetooth Bluetooth  
Settings.  
2. If you are unable to connect with the device a pop-up  
appears in the display. Press the Yes soft key to retry.  
The following options appear in the display:  
Disconnecting from a Bluetooth Device  
Enable/Disable  
From the Registered List, highlight the device and press  
Selecting this option turns Bluetooth on or off. (For more  
the Off soft key.  
Discovery Mode  
Managing Your Registered List  
Allows other users to see your accessibility. Select On for other  
devices to see your device, or Off for no visibility.  
1. From the Registered List, highlight a device and press the  
Options soft key. The following options appear in the  
display:  
Device Name  
Shows the handset name. You may change this name. Enter the  
Remove Device — Deletes the device from the Registered List.  
OK  
text and press  
or  
.
Rename Device — Lets you change or replace the device name,  
as needed.  
Supported Profiles  
Device Info — Shows the type of device, status, address, the date  
when it was paired with your phone, and the date the device was  
last connected with your phone.  
Lists and describes the Bluetooth profiles your phone supports.  
Device Info  
Shows the Bluetooth Type, Status, and Address of your phone.  
2. Select the desired option to access it.  
89  
To access other options while viewing the calendar, press the  
Options soft key. The following options pop-up in the display:  
Calendar  
Calendar allows you to view the  
current, past, or future month in  
calendar format. While viewing the  
calendar, the current date is  
highlighted, and days with scheduled  
events are surrounded by a box.  
Go to Date — Lets you jump to any date you specify.  
Go to Today — Lets you return to today from any other date.  
Erase Old — Lets you erase past events.  
Erase all — Lets you erase all events.  
Select the desired option and perform the related process.  
OK  
3. Press VIEW ( or  
) to  
View an Event  
display the specifics of the  
highlighted event. The  
following options are  
available:  
1. From the Tools menu, select  
Calendar. A calendar appears in the display with the  
current date highlighted. The month and year appear at the  
top of the display.  
To change the event details, press  
the Edit soft key. (See “Add a  
more information.)  
2. Use the following options and navigation keys to move  
around within the calendar:  
To move to an individual day, one day or one week at a time, press  
the Navigation keys or Arrow keys.  
To return to the Events list, press  
OK  
OK  
(
or  
).  
To view previous months, press the Up volume key.  
To view future months, press the Down volume key.  
To add an event to the highlighted date, press the Add soft key.  
OK  
For more options, press the Options soft key. The following options  
appear in the display:  
Monthly — Returns you to the Monthly calendar display.  
To call up a list of events on the highlighted date, press VIEW  
(
Erase — Remove this event from the Calendar.  
or  
).  
Select the desired option.  
Tools  
90  
       
Add a New Event  
4. To set the Start Date, use the keypad to enter the start  
date for the event.  
1. From the Tools menu, select Calendar.  
5. To set the Start Time:  
A calendar appears in the display with the current date  
highlighted. The month and year appear at the top of the  
display.  
Use the keypad to enter the time for the event.  
Use the Left and Right navigation keys to select AM or PM  
.
6. Repeat Steps 4 and 5 for the End Date and End Time.  
2. Press the Add soft key. The  
New Event screen appears in  
the display.  
7. Use the Left and Right navigation keys or arrow keys to  
select:  
Use the Up and Down navigation  
keys to highlight New Event  
options.  
Alert type (Tone, Vibrate, Light Only)  
Alert tone (the Alert Tone screen appears in the display. See  
Sounds Gallery” on page 85 for more information.)  
Use the Left and Right navigation  
keys to select option values.  
Reminder  
(
Off  
15 Min. Before  
5 Hours Before  
10 Min. Before  
,
Once  
,
Every 2 Minutes  
30 Min. Before  
1 Day Before  
,
Every 15 Minutes  
1 Hour Before  
On Time 5 Min.  
)
Use the keypad to enter option  
values.  
Alert time  
Hours Before  
(
,
,
,
3
,
,
,
,
3. Enter the Name of the new event using the keypad.  
Before  
,
)
OK  
8. Press SAVE  
(
or  
) to store the event in your calendar.  
An alarm will notify you prior to the event, provided you set  
Reminder to a value other than Off.  
Note: The current mode of text entry is indicated in the lower left corner of  
the display.  
91  
   
Review, Edit, and Erase Memos  
Memo Pad  
1. From the Tools menu, select Memo Pad. Your list of stored  
memos appears in the display.  
Create notes and store them in  
Memo Pad. Notes that you create in  
Return to Memo Pad anytime to  
review and edit your notes.  
2. Highlight the desired memo. You have the following  
options:  
Note: Memo Pad can’t be prioritized or  
To add a new memo, press the Add soft key. (For more information,  
assigned an alert.  
OK  
To review the highlighted memo, press VIEW  
(
or  
).  
Create a Memo  
1. From the Tools menu, select Memo Pad.  
While viewing a memo, you can do any of the following:  
Change the text of the memo by pressing the Edit soft key and using  
page 33.)  
If you have any stored memos, they appear as a list in the  
display.  
OK  
Return to the Memo Pad screen by pressing OK  
(
or  
).  
2. If you don’t have any stored memos, press the Add soft  
Press the Options soft key to Erase the memo you are viewing, Add a  
New Memo, or Lock/Unlock the memo you are viewing.  
key to add a memo.  
For more options, press the Options soft key and the following  
3. Enter memo text using the keypad. (For more information,  
options appear in the display:  
Edit— Change the text of the highlighted memo by using the keypad.  
Tip: The current mode of text entry is indicated in the lower right corner of  
Erase — Erase the highlighted memo.  
the display.  
Erase all — Erase all of the unlocked memos.  
4. When you’re finished entering details for the memo, press  
Lock Unlock — Prevents/allows erasure of the highlighted memo.  
/
OK  
OK  
(
or  
). The memo is stored.  
3. Select the desired option.  
Tools  
92  
     
4. To set the Time:  
Alarm Clock  
Enter the time for the alarm using the keypad.  
Use the Left and Right navigation keys to select AM or PM  
Your phone has three alarm clocks that can be set to go off once,  
or to recur daily at a specific time. Once set, an alarm clock is  
easy to change or turn off completely.  
.
5. Use the Left and Right navigation/arrow keys to select the  
Frequency at which you wish the alarm to occur (Daily,  
Mon.-Fri., Weekends, or Once).  
Note: The alarm doesn’t function when the phone is turned off. If the time for  
an alarm that was set for Once has elapsed while the phone is off, the  
alarm occurs at the specified time on the next day.  
6. Use the navigation/arrow keys to select the Ringer type  
(Tone, Vibrate, Light Only) and ringtone (from My  
Ringtones or My Sounds).  
1. From the Tools menu, select Alarm Clock. The following  
options appear in the display:  
Alarm 1  
Alarm 2  
Alarm 3  
7. When you’re finished entering the time and frequency for  
OK  
the alarm, press SAVE  
(
or  
). If the alarm is set to On  
and if Buetooth is disabled, the alarm icon (  
in the top of the display.  
) appears  
2. Select the alarm clock you  
wish to set. The selected Set  
Alarm screen appears in the  
display.  
When an Alarm Sounds  
An animated alarm clock appears in the display along with  
Snooze and Dismiss options and an alert sounds when the  
specified time for the alarm arrives.  
Use the Up and Down  
navigation keys to highlight  
Set Alarm options.  
To silence the alarm, use the Navigation key to highlight Snooze or  
OK  
Dismiss and press  
.
If the alarm was set as a Daily alarm, the alarm icon remains in the top  
of the display.  
3. Use the Left and Right  
navigation/arrow keys to set the alarm Off or On.  
93  
     
If the alarm was set as a Once only alarm, the alarm icon disappears  
from the top of the display.  
World Time  
World Time lets you view the time of  
day or night in any of the 24 different  
time zones around the world.  
Turn Off the Alarm  
1. From the Tools menu, select Alarm Clock. The following  
options appear in the display:  
Note: To use World Time, you need to  
subscribe to your Wireless Provider’s  
digital service.  
Alarm 1  
Alarm 2  
Alarm 3  
1. From the Tools menu, select  
World Time. A world map  
appears in the display.  
2. Highlight the desired alarm, then press the Options soft  
key. The following options appear in the display:  
On Off — Enables/disables the highlighted alarm without  
/
2. Use the Left and Right navigation/arrow keys to browse  
cities and their current times. The following cities are  
supported.  
changing the settings.  
Reset Alarm — Disables the highlighted alarm and restores its  
settings to default values.  
EST/EDT :  
New York  
EST/EDT :  
Montreal  
EST/EDT :  
Boston  
Reset All — Disables all alarms and resets all alarm settings to  
default values.  
Caracas  
Cape Verde  
Rome  
Brasilia  
Mid Atlantic  
Paris  
3. Select the desired option.  
London  
Berlin  
Athens  
Helsinki  
Baku  
Jerusalem  
Abu Dhabi  
Bangkok  
Moscow  
Tashkent  
Jakarta  
Alma-ata  
Tools  
94  
       
OK  
3. To accept the highlighted setting, press  
or  
. If the  
Hong Kong  
Tokyo  
Beijing  
Seoul  
DST icon ( ) appears in the display, it indicates that  
Guam  
Sydney  
Samoa  
Daylight Savings Time is enabled for the displayed time  
zone.  
Okhotsk  
Midway  
Wellington  
HAST/HADT :  
Honolulu  
HAST/HADT :  
Hawaii  
Calculator  
AKST/AKDT :  
Alaska  
PST/PDT :  
Seattle  
PST/PDT :  
San Francisco  
You can perform calculations, including addition, subtraction,  
multiplication and division using your phone.  
PST/PDT :  
Los Angeles  
MST/MDT :  
Denver  
MST/MDT :  
Arizona  
Note: You must use the phone keypad to use the Calculator.  
CST/CDT :  
Dallas  
CST/CDT :  
Chicago  
CST/CDT :  
Houston  
1. From the Tools menu, select Calculator. The Calculator  
appears in the display.  
CST/CDT :  
Mexico City  
EST/EDT :  
Detroit  
EST/EDT :  
Washington D.C  
2. Enter the first number in your  
calculation using the keypad.  
(Numbers can be up to 9 digits  
long, and can include a  
3. Do one of the following:  
To set the displayed time zone as the default time zone for your  
phone, press  
OK  
or  
.
To return to the Tools menu without changing the default time  
zone, press or  
decimal point followed by up  
to 3 more digits.)  
.
Enable Daylight Savings Time (DST)  
1. Display the desired time zone.  
To enter a decimal point, press  
.
2. Press the Options soft key. DST Off / DST On pops-up in  
To change the sign for a number  
to a negative, press  
.
the display.  
95  
     
To add parentheses [( )] to your calculation or to enter a Power  
exponent (^), such as, 3^2, which is the equivalent of 32, press the  
Operator soft key.  
Stop Watch  
You can use this function to set a  
stop watch.  
Press the Clear soft key) to clear current entries.  
1. From the Tools menu, select  
Stop Watch. The Stop Watch  
screen appears in the display.  
3. Use the Navigation keys (as shown in the Calculator  
screen) to set the type of calculation that you wish to  
perform. Your choices are as follows.  
2. To start, stop, and resume the  
[
[
[
[
+
x
] Addition  
OK  
stopwatch count, press  
.
or  
] Multiplication  
-
] Subtraction  
] Division  
3. At the start of each succeeding event/lap, press the  
Record soft key to record the completion time for the  
previous event/lap. You can record up to eight event/lap  
times.  
÷
4. Use the keypad to enter the second number into your  
equation.  
OK  
5. Press  
to perform the calculation and view the result.  
4. To reset the stop watch and to erase all stop watch (lap)  
times recorded, press the Reset soft key.  
Converter  
The conversion menu provides the following conversion  
categories:  
Currency  
Length  
Weight  
Tools  
96  
   
Volume  
4. Enter the quantity you want converted in the From field.  
Area  
The converted quantity appears in the To field.  
Temperature  
Note: To include a decimal point, press the  
key.  
To convert a currency, length, weight, volume, area, or  
temperature, do the following:  
Currency — Reviewing/Editing Exchange Rates  
1. From the Tools menu, select Converter. The following list  
The Currency Converter includes long-term average exchange  
rates as default values. To review and/or change a default  
exchange rate to the current exchange rate, do the following:  
of converters appears in the display:  
• Currency  
• Length  
1. From the Tools menu, select Converter Currency.  
• Weight  
2. Press the Rate soft key. The EXCHANGE RATE list appears  
• Volume  
in the display.  
• Area  
OK  
3. Press EDIT ( or  
). The EDIT EXCHANGE RATE list  
Temperature  
2. Select the conversion feature  
you wish to use.  
appears in the display.  
4. Highlight a currency whose  
exchange rate you wish to  
change.  
3. Use the Navigation/Arrow keys  
to select the units to be  
5. Use the keypad keys to  
change the selected exchange  
rate value.  
converted From and To.  
97  
OK  
6. To save the changed exchange rate, press OK  
(
or  
).  
3. Press the Add soft key. The  
ADD EXCHANGE RATE screen  
appears in the display with the  
Base field highlighted.  
The EXCHANGE RATE list appears in the display.  
To discard the change, press the Cancel soft key.  
7. To change any other exchange rates, repeat Steps 3 – 6.  
4. Use the Left and Right  
navigation/arrow keys to  
select the Base currency to be  
converted from.  
8. To return to the Converter screen, press or  
.
Currency — Adding Exchange Rates  
You can use the Currency Converter to convert from and to  
obscure currencies by adding exchange rates for these  
currencies. To add a currency and its exchange rate to the  
Currency Converter, do the following:  
5. Highlight the Currency field, and enter an identifier of up  
to 5 characters for the new currency using either keypad.  
1. From the Tools menu, select Converter Currency.  
2. Press the Rate soft key. The EXCHANGE RATE list for the  
6. Highlight the Exchange Rate field, and enter a decimal  
From currency appears in the display.  
exchange rate for the new currency using either keypad.  
Note: Press the  
key to enter the decimal point.  
The Exchange Rate field only accepts up to five digits after the  
decimal point.  
OK  
7. Press SAVE  
(
or  
) to save the new exchange rate.  
Tools  
98  
Currency — Erasing Exchange Rates  
Calculations are based on the total amount of the check, a  
selected gratuity percentage, and the number of people paying.  
You cannot erase the preloaded currencies from the Exchange  
Rate list. You can erase a currency that you have added to the list  
by doing the following:  
1. From the Tools menu, select Tip Calculator. The Tip  
Calculator screen appears in screen, with the Bill field  
highlighted.  
1. From the Tools menu, select Converter Currency.  
2. Press the Rate soft key. The EXCHANGE RATE list for the  
2. Use the keypad to enter the  
From currency appears in the display.  
total amount of the bill.  
3. Use the Up and Down navigation keys to highlight the user-  
3. If needed, highlight the Tip  
field, and enter a tip  
percentage.  
added currency exchange rate to be erased.  
4. Press the Erase soft key. You are prompted to confirm the  
erasure.  
4. If needed, highlight the #  
Paying field, and enter the  
number of persons paying.  
Note: The Erase soft key is undefined for preloaded Exchange Rates. This  
prevents you from erasing them.  
5. The amount of the Tip, the final Total, and the amount Each  
5. To erase the selected exchange rate, press the Yes soft  
key. To keep selected exchange rate, press the No soft  
key.  
person should pay appear in the lower half of the screen.  
Tip Calculator  
Tip Calculator automatically calculates the following amounts:  
Gratuity (tip)  
Individual payment (for groups)  
99  
 
Section 13: Settings  
This section explains how to configure your phone’s language,  
network preferences, security options, and other settings.  
Display Settings  
Display settings let you change your phone’s menu appearance,  
display brightness and contrast, and display content to better  
meet your needs.  
Accessing Your Phone’s Settings  
To launch the Settings menu:  
1. From the Settings menu, select Display Settings. The  
OK  
In standby mode, press  
or  
, then select Settings.  
following menus appear in the display:  
The Settings menu appears in the display.  
• Menu Style — Lets you select whether the Main Menu appears as  
an array of Icons or as a List of menu labels.  
Location Setting  
You can set your phone to pass Global Positioning System (GPS)  
data to identify your location to the network continually or only  
when you make an emergency (911) call.  
Wallpaper — Choose the images that appear as background in  
the Main display on your phone while in standby mode.  
Clock Format — Choose whether the time and date appear in the  
Main and Front displays on your phone in optional digital or analog  
(clock face) style or in the default digital style.  
Note: Check with your Wireless Carrier to determine if/when/where location-  
based services are available.  
Theme — Choose the color set used to show menus and screens  
on your phone’s display.  
1. From the Settings menu, select Location. The following  
Dialing Font Size — Lets you select the size of the font used to  
display digits you dial.  
Location options appear in the display:  
Location On — Your location data is continually sent wherever the  
feature is available.  
Banner — Lets you change or replace the text greeting that  
appears in the display when your phone is in standby mode. Also  
lets you enable/disable an ERI (Extended Roaming Indicator)  
banner.  
911 Only — Your location data is sent only when you dial 911.  
2. Select the desired setting. The Settings menu appears in  
your display.  
Settings  
100  
               
Backlight — Set backlight options for the Main Display, Keypad,  
3. Select the image you wish to use.  
backlight Brightness, and Charging.  
Clock Format  
2. Select the desired sub-menu. The following sections  
Lets you choose whether the time and date appear in the Main  
display on your phone in optional digital or analog (clock face)  
style or in the default digital style.  
describe the Display sub-menus in greater detail.  
Menu Style  
1. From the Settings menu, select Display Settings  
Menu  
1. From the Settings menu, select Display Settings ➔  
Style. The following options appear:  
Clock Format.  
• Icon — Shows all main menus as an array of icons.  
The following clock format options appear in the display:  
• List — Shows main menus in scrollable list (text) format.  
Digital — Time, date, and day of the week are shown using an  
alternate, large digital format.  
2. Select the desired Menu Style.  
Analog — Time is shown using an analog clock face image.  
Wallpaper  
Off — Time, date, and day of the week are shown using the  
default, small digital format.  
Wallpaper lets you choose images that appear in the background  
on your phone’s Main display while in standby mode.  
2. Select the clock format that you wish to use.  
1. From the Settings menu, select Display Settings ➔  
Theme  
Wallpaper. The following options appear:  
Lets you select the colors used to show menus and screens in  
the Main display.  
My Images — Lets you select an image that you’ve downloaded  
or a picture you’ve taken with the camera.  
Preset Images — Lets you select an image that came preloaded  
with your phone.  
2. Select the image type you wish to use. A list of images  
appears in the display.  
101  
     
1. From the Settings menu, select Display Settings ➔  
1. From the Settings menu, select Display Settings ➔  
Theme. The following options appear in the display:  
Banner. The following sub-menus appear in the display:  
Personal  
ERI Banner  
2. Select the desired banner.  
If you select Personal, the Banner screen appears in the display  
with the Enter Text field highlighted.  
2. Use the Navigation/Arrow keys to show the desired color  
Enter a word or short phrase to appear in your phone’s display  
while in standby mode (Up to 12 characters). See “Entering  
Text” on page 33 for more information.  
theme (which appears in the preview screen), then press  
OK  
OK  
(
or  
) to save the displayed theme setting.  
Dialing Font Size  
Tip: Press and hold  
to erase an existing banner, if necessary.  
Lets you select the character size of your dialing font.  
1. From the Settings menu, select Display Settings ➔  
Dialing Font Size. The following options appear in the  
display:  
OK  
Press OK  
(
or  
) to save your changes.  
If you select ERI Banner, the following options appear in the  
display:  
On  
Off  
Normal  
Large  
Select the desired setting.  
2. Select the desired dialing font size.  
Backlight  
Banner  
You can set the backlight for your display or keypad to remain on  
for a specified period of time or remain on as long as the folder is  
open.  
Create your own personalized greeting that appears in the  
display while your phone is in standby mode.  
Settings  
102  
     
Sound Settings  
Note: Prolonged backlight use drains your battery faster.  
Sound Settings let you customize your phone’s audio properties,  
such as ringers, keypad tones, alerts, start up melody, and more.  
1. From the Settings menu, select Display Settings ➔  
Backlight.  
Volume  
The following sub-menus appear in the display:  
Use the Volume sub-menu to set the default volume for call  
ringers, message alerts, and alarms.  
Main Display — Sets the time the internal display backlight  
remains on after a period of inactivity. Optional settings are: 10  
1. From the Settings menu, select Sound Settings ➔  
seconds  
,
15 seconds, 30 seconds, Always On, and Always  
Volume. The following options appear in the display:  
Off.  
Voice Calls — Lets you set your phone’s Vocie Calls ringer to be  
Off, to Vibrate, or to play a selected ringtone, melody, or sound at  
Low – High/Vibrate volume.  
Keypad — Sets the amount of time the keypad backlight remains  
on after a period of inactivity. Optional settings are: 10 seconds 15  
seconds 30 seconds Always On, and Always Off  
,
,
,
.
Messages — Lets you set your phone’s New Messages ringer to  
be Off, to Vibrate, or to play a selected ringtone, melody, or sound at  
Low – High/Vibrate volume.  
Brightness — Use the Left and Right navigation keys to select  
between any of 5 optional settings.  
• Charging — Use the Navigation key to select between On  
(backlight does not go off while the battery is charging) and Off  
(backlight does go off while the battery is charging).  
Alarms — Lets you set your phone’s Alarms ringer to be Off, to  
Vibrate, or to play a selected ringtone, melody, or sound at Low –  
High/Vibrate volume.  
2. Use the Up and Down navigation keys to highlight the  
2. Select the desired option, then select the desired volume  
level (Ringer Off, Low, Low/Medium, Medium, Medium/  
High, or High) or vibrate mode (Vibrate, Vibrate/High).  
OK  
desired sub-menu and press the  
key.  
3. Use the navigation keys to change settings as desired in  
OK  
the selected sub-menu, and press the  
selection.  
key to save your  
103  
   
Ringer Type  
Alerts  
You can assign ring tones and melodies for calls, alarms, and  
other alerts in the Ringer Type sub-menu.  
You can set your phone to sound an alert whenever you enter or  
leave your service area, connect or disconnect a call, and other  
options.  
1. From the Settings menu, select Sound Settings ➔  
Ringer Type. The following ringer types appear in the  
display:  
1. From the Settings menu, select Sound Settings ➔  
Alerts. The following alerts appear in the display:  
Minute Beep — Sound an alert ten seconds before each elapsed  
Voice Calls  
Messages  
minute of a call.  
Roaming — Sound an alert when you leave your home service  
area while on a call.  
Text Message  
Picture Message  
Voicemail  
Call Connect — Sound an alert when you connect/disconnect a  
call.  
Roam Ringer  
Power On/Off — Play power on and power off melodies.  
2. Select a ringer type. The following ringtone/sounds  
2. Select the desired alert. The following options appear in  
galleries appear in the display:  
the display:  
My Ringtones  
My Sounds  
• On  
• Off  
3. Select the desired gallery.  
3. Select active (On) or inactive (Off) for the selected alert.  
4. Select the desired ringtone, melody, or sound file.  
Key Tone  
Tip: To play each tone, melody, or sound file as you scroll through the list,  
Lets you adjust the volume level and duration of the tones that  
the keypad generates when you press the keys.  
press the Play soft key.  
Settings  
104  
     
1. From the Settings menu, select Sound Settings Key  
Auto Answer  
Tone. The following options appear in the display:  
Auto Answer enables your phone to automatically answer calls  
after a period of time that you specify.  
Tone Level — Select the desired Keypad volume level (Off  
,
Low,  
Low/Medium Medium Medium/High, or High).  
,
,
1. From the Settings menu, select Call Settings Auto  
Tone Length — Select the desired DTMF Tones length as Short or  
Long  
Answer. The following options appear in the display:  
.
Off  
2. Select the desired option and setting.  
After 1 Second  
After 3 Seconds  
After 5 Seconds  
Call Settings  
The Call Settings sub-menu lets you set call options such as Auto  
Retry, Data rates for data calls, and more.  
2. Select the desired setting.  
Call Answer  
Auto Retry  
You can select a specific answer mode when you receive an  
incoming call. Your phone can be preset to answer when you do  
any of the following:  
Auto Retry automatically re-dials a number if there is no answer  
or the dialed party is busy. Depending upon your location, the  
number of times your phone redials a number may vary.  
1. From the Settings menu, select Call Settings Call  
Answer. The following call answer options appear in the  
display:  
1. From the Settings menu, select Call Settings Auto  
Retry. The following options appear in the display:  
Off  
Any Key — Pressing any key except  
,
, or  
Every 10 Seconds  
Every 30 Seconds  
Every 60 Seconds  
answers a call.  
Send Key — Only pressing  
answers a call.  
2. Select the desired option.  
2. Select the desired setting.  
105  
         
TTY Mode  
TTY Off — Disables TTY mode.  
Your phone is fully Teletypewriter (TTY)/Telecommunication  
Device for the Deaf (TDD) compatible. You connect TTY/TDD  
equipment to the headset connector on the top of your phone,  
behind the folder hinge.  
Note: The TTY Mode option has no effect on the phone’s earpiece,  
microphone, or speaker. When you select TTY Full, all currently  
enabled sound functions remain enabled.  
3. Select the desired setting. If you select a setting other that  
TTY Off, you’re returned to the previous menu and the TTY  
Note: TTY Mode must be enabled (TTY Full selected) before you can use  
your phone with TTY/TDD equipment.  
icon (  
) appears in the top of the display.  
1. From the Settings menu, select Call Settings TTY  
Mode. A message pops-up warning of possible headset  
and non-TTY accessory performance impairment when in  
TTY mode and prompting you to confirm that you want to  
enable/disable TTY Mode.  
Voice Privacy  
Voice Privacy lets you choose what level of voice security  
(Standard or Enhanced) your phone will use.  
Tip: You can change your Voice Privacy setting during a call by using the In-  
Use Menu options. (See “In-Use Menu” on page 26 for more  
information.)  
To confirm you want to view/change the TTY Mode setting, press  
the Yes soft key.  
1. From the Settings menu, select Call Settings Voice  
To keep the current TTY Mode setting, press the No soft key.  
Privacy. The following options appear in the display:  
2. The following options appear in the display:  
Standard  
Enhanced  
TTY Full — Enables TTY mode while letting you hear and speak  
with the other party.  
2. Select the desired setting.  
TTY + Talk — Enables TTY mode while letting you speak with the  
other party.  
TTY + Hear — Enables TTY mode while letting you hear the other  
party.  
Settings  
106  
   
Data Settings  
On — Disables the radio transmitter and receiver and the  
Bluetooth interface in your phone.  
Use the Data Settings sub-menu to set your phone to detect  
data connections automatically.  
Tip: If you need to make an emergency call with Airplane mode enabled, just  
dial the emergency number and press  
.
1. From the Settings menu, select Call Settings Data  
Settings. The following options appear in the display:  
Off — Enables the radio transmitter and receiver in your phone.  
to return to the Phone Settings menu.  
Data Off — Your phone ignores data connections.  
Data For Next Call — Your phone accepts data connection for the  
next call.  
Note: Press  
Data Until Powered Off — Your phone accepts data connections  
until you turn off your phone.  
2. Select the desired setting. You are prompted to confirm  
your setting change.  
2. Select the desired setting.  
3. To change to the new setting, press the Yes soft key. You  
Phone Settings  
Airplane Mode  
are returned to standby mode.  
To discard the change and keep the original setting, press  
the No soft key. The Airplane Mode screen remains in the  
display.  
When set to On, Airplane Mode disables all radio functions of  
your phone. This prevents you from making or receiving calls, but  
allows you to use other features (such as the camera and the  
Tools) safely in sensitive environments, such as on board an  
aircraft.  
Language  
The Language option changes the language of menus, sub-  
menus, and other user-interface features.  
1. From the Settings menu, select Phone Settings ➔  
Airplane Mode. The following options appear in the  
display:  
1. From the Settings menu, select Phone Settings ➔  
Language.  
107  
       
The following options appear in the display:  
2. Enter the four-digit lock code using the keypad.  
English  
Español  
Note: The default lock code is the last four digits of your mobile phone  
number.  
2. Select your language preference.  
The “Enter Code” prompt disappears and the Security  
Security  
menu appears in the display.  
Use the Security sub-menu to lock your phone, set up emergency  
numbers, enable or disable voice privacy, set restrictions, and  
other security options.  
3. Select Lock Phone. The following options appear in the  
display:  
Lock — The phone locks immediately and stays locked until you  
enter the lock code.  
Lock Phone  
Locking the phone blocks all outgoing calls except those to 911  
and to the three user-programmed emergency numbers. You can  
lock the phone manually, or set the phone to lock automatically  
when turned on. In Lock mode, you can answer calls, but you  
must unlock the phone to place calls (except to emergency and  
secret numbers).  
Unlock — The phone remains unlocked.  
On Power Up — The phone locks automatically the next time your  
phone is powered on and stays locked until you enter the lock code.  
4. Select the Lock Phone option of your choice.  
Change Lock  
The default lock code is generally the last four digits of your  
phone number. It is advisable to change the default lock code to a  
secret code for security purposes.  
Important!: If you change the NAM1 setting after setting the phone to lock  
upon power-up and did not program a number into NAM2, you  
won’t be able to access your phone. You must call the Service  
Center to unlock your phone.  
1. From the Settings menu, select Phone Settings ➔  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Security.  
The “Enter Code” prompt appears in the display.  
The “Enter Code” prompt appears in the display.  
2. Enter the four-digit lock code using the keypad.  
Settings  
108  
       
Note: The default lock code is the last four digits of your mobile phone  
Important!: Because of various transmission methods, network parameters,  
and user settings used to complete a call from your wireless  
phone, a connection cannot always be guaranteed. Therefore,  
emergency calling may not be available on all wireless networks  
at all times.  
number.  
3. Select Change Lock.  
The “New Lock Code” prompt appears in the display.  
Important!: DO NOT depend on this phone as a primary method of calling  
4. Enter the New Lock Code. You’re prompted to re-enter the  
911 or for essential or emergency calls.  
New Lock Code for verification.  
Remember to always turn your phone on and check for adequate  
signal strength before placing a call.  
5. Enter the new lock code again. Your changes are stored.  
Note: Your phone does not allow you to view the lock code for obvious  
security reasons. If you change the lock code, be sure to write down or  
memorize the new code.  
Note: When you dial an emergency number, you phone locks itself to the  
emergency location that answered the call and locks itself in 911-Only  
mode, blocking from dialing any number but an emergency number.  
Emergency #  
Store Emergency Numbers  
You have the option of storing up to three emergency numbers to  
your phone. Each number can be up to 32 digits in length. All  
emergency numbers can be dialed any time, even when your  
phone is locked or restricted.  
1. From the Settings menu, select Phone Settings ➔  
Security.  
The “Enter Code” prompt appears in the display.  
2. Enter the four-digit lock code using the keypad.  
Note: Emergency number 911 is hard-coded into your phone. You can dial  
this number any time, even when the phone is locked or restricted. If  
you call 911 an audible tone is heard and an Emergency prompt  
appears in the display for the duration of the call.  
Note: The default lock code is the last four digits of your mobile phone  
number.  
109  
     
The “Enter Code” prompt disappears and the Security  
1. From the Settings menu, select Phone Settings ➔  
menu appears in the display.  
Security.  
3. Select Emergency #.  
The “Enter Code” prompt appears in the display.  
4. Select one of the three emergency numbers.  
2. Enter the four-digit lock code using the keypad.  
5. Enter the emergency number (up to 32 digits in length).  
Note: The default lock code is the last four digits of your mobile phone  
number.  
OK  
6. To save the number that you entered, press OK  
(
or  
).  
The “Enter Code” prompt disappears and the Security  
7. To discard your entry and return to the previous menu,  
menu appears in the display.  
press the Cancel soft key.  
3. Select Reset Phone. A prompt appears in the display to  
restore default settings (except for Contacts).  
Call Emergency Numbers in Lock Mode  
1. In standby mode, enter the emergency number using  
either keypad.  
4. To reset your phone to factory default settings, press the  
Yes soft key.  
2. Press  
to place the call.  
To keep the current settings, press the No soft key.  
Reset Phone  
Erase All Entries  
Reset Phone returns all setup parameters (except for the  
Contacts entries) to their factory default values.  
Erase All Entries deletes all entries from the Contacts list.  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Caution!: Before selecting Reset Phone, contact your Wireless Carrier. Invoking  
Reset Phone may erase settings made by your Wireless Carrier from  
your phone, resulting in loss of service.  
The “Enter Code” prompt appears in the display.  
2. Enter the four-digit lock code using the keypad.  
Settings  
110  
     
3. Select Restriction. The following options appear in the  
Note: The default lock code is the last four digits of your mobile phone  
display:  
number.  
• Outgoing — Restrict/allow outgoing calls.  
• Incoming — Restrict/allow incoming calls.  
The “Enter Code” prompt disappears and the Security  
menu appears in the display.  
• Contacts — Restrict/allow access to your Contacts list.  
4. Select the desired option and select the desired setting [On  
(restricted) / Off (unrestricted)].  
3. Select Erase All Entries.  
The “Erase all entries?” prompt appears in the display.  
4. To reset your Contacts list, press the Yes soft key.  
To keep the current Contacts entries, press the No soft key.  
Restriction  
Note: The default restriction settings are all Off.  
NAM Selection  
NAM Selection allows you to set your preferred system. Contact  
your wireless carrier for more information.  
Restriction lets you restrict the use of your phone for outgoing  
calls, incoming calls, and calls placed by/to your Contacts.  
1. From the Settings menu, select Phone Settings NAM  
1. From the Settings menu, select Phone Settings ➔  
Selection.  
Security.  
The following NAM options appear in the display:  
The “Enter Code” prompt appears in the display.  
NAM 1 — Your service contract has one phone number.  
2. Enter the four-digit lock code using the keypad.  
NAM 2 — Your service contract has two phone numbers.  
2. Select the desired setting. The phone automatically  
Note: The default lock code is the last four digits of your mobile phone  
number.  
restarts.  
The “Enter Code” prompt disappears and the Security  
menu appears in the display.  
111  
   
System Select  
Note: In digital service mode, the Set Time feature is disabled. The network  
adjusts time and date automatically.  
The System Select feature enables you to automatically or  
manually select the network used when roaming outside of your  
home area.  
With Airplane Mode set to On, the Set Time feature is enabled.  
1. From the Settings menu, select Phone Settings Set  
1. From the Settings menu, select Phone Settings ➔  
Time. The following options appear in the display:  
System Select.  
Set Time  
Set Date  
The following roaming options appear in the display:  
MetroPCS only — Roaming is OFF. If your home system is not  
available then your call will not be connected, and the no service  
2. Select Set Time. The Set Time screen appears in the  
icon (  
) appears in the display. In some service areas, an  
display.  
operator may come on-line and ask you how you would prefer to  
pay for the call.  
3. Enter the current time using your keypad:  
Automatic — Roaming is ON. It will always try your calls using the  
Preferred Roaming List (PRL) loaded into your phone. If a preferred  
service is not found, then this option will attempt to acquire any  
digital service.  
The hour and minute must be entered using two digits each. You  
must enter the hour in 12-hour format.  
Use the Left and Right navigation keys to select am or pm.  
OK  
4. Press OK  
(
or  
) to save the time. The following  
2. Select the desired Roam setting.  
options appear in the display:  
The Phone Settings menu appears in the display.  
Set Time  
Set Date  
Set Time  
Use the Set Time option to set the current time and date.  
5. Select Set Date. The Set Date screen appears in the  
display.  
Settings  
112  
   
6. Enter the current date using your keypad:  
2. Press the Up navigation key. The Contacts Find screen  
appears in the display with the first matching contact  
name in a list highlighted.  
The month and day must be entered using two digits each.  
The year must be entered with all four digits.  
OK  
7. Press OK  
(
or  
) to save the date.  
3. Highlight the desired Contact and press  
to call the  
contact.  
Quick Search  
Searching for a Menu Item  
Quick Search is an easy way to locate contacts in your Address  
Book and Menu items.  
1. In standby mode, press the first few numeric keys that  
1. From the Settings menu, select Phone Settings Quick  
correspond to the letters of the Menu item name.  
Search.  
For example, to search for “Inbox” you would enter  
The following options appear in the display:  
On  
Off  
I
N
B
O
X
2. Select the desired option.  
2. Press the Down navigation key. The Menu List screen  
appears in the display with the first matching menu item in  
a list highlighted.  
Searching for a Contact  
1. In standby mode, press the first few numeric keys that  
correspond to the letters of the contact’s name.  
3. Select the desired menu item.  
For example, to search for “Sally” you would enter  
PC Connection  
PC Connection lets you allow or block PC connections to your  
phone, using an optional USB Data Cable.  
S
A
L
L
Y
113  
 
1. From the Settings menu, select Phone Settings ➔  
PC Connection. The following settings appear in the  
display:  
Turn the screen backlight on by pressing any key.  
2. Press the Unlock soft key. “Press * to unlock keys” pops-up  
in the display.  
• USB Mass Storage — Your phone appears as a removable disk  
drive to your PC, allowing you to transfer files (such as, music or  
text files) to and from your phone.  
3. Press  
.
Memory Info  
Memory Info shows the amount of phone memory that is  
available and used, and details the distribution of the used  
memory.  
• No Connection — Blocks connection and file transfers with a PC.  
2. Select the desired setting.  
Auto Key Lock  
Save Options  
With Auto Key Lock set to On, your phone automatically disables  
its keys when the screen backlight goes out with the phone  
closed.  
1. From the Settings menu, select Memory Info ➔  
Save Options Images. The following options appear in  
the display:  
1. From the Settings menu, select Phone Settings ➔  
Auto Key Lock. The following settings appear in the  
display:  
• Phone Memory — Stores pictures taken with your phone’s  
camera in the phone’s memory.  
• Card Memory — Stores pictures taken with your phone’s camera  
in an optional microSD™ Memory Card.  
On  
Off  
2. Select the desired setting.  
2. Select the desired option.  
Phone Memory  
1. From the Settings menu, select Memory Info ➔  
Phone Memory.  
To unlock the keys:  
1. Open the QWERTY keypad,  
– Or –  
Settings  
114  
       
The following options appear in the display:  
Mark individual files by highlighting each file, then pressing MARK  
OK  
(
or  
); or mark all files by pressing the Mark All soft key.  
Memory Usage — Shows Total phone memory, total memory  
Available, and memory quantities used to store Images, Ringtones,  
Sounds, Applications, and Picture messages.  
Press the Done soft key. You are prompted to confirm the  
erasure(s)/move(s).  
To erase/move/copy the selected file(s), press the Yes soft key.  
My Images — Lists the photos stored in the My Images folder.  
Lets you copy photos to an optional Memory Card or lets you make  
used memory available by erasing unwanted photos or by moving  
photos to an optional Memory Card.  
To keep the selected file(s), press the No soft key.  
Card Memory  
1. From the Settings menu, select Memory Info ➔  
Card Memory. The following options appear in the display:  
My Ringtones — Lists the downloaded ringtones stored in the My  
Ringtones folder. Lets you make used memory available by erasing  
unwanted recorded sounds.  
Memory Usage — Shows Total phone memory, total memory  
Available, and memory quantities used to store Images and Music.  
My Sounds — Lists the recorded sounds stored in the My Sounds  
folder. Lets you make used memory available by erasing unwanted  
recorded sounds.  
My Images — Lists the photos stored in the My Images folder.  
Lets you copy photos to phone memory or lets you make used card  
memory available by erasing unwanted photos or by moving photos  
to phone memory.  
2. Select the desired option.  
3. To delete/move selected photos, downloaded ringtones, or  
My Music — Lists the downloaded Music files stored in the My  
Music folder. Lets you make used card memory available by  
erasing unwanted Music files.  
recorded sounds:  
Select My Images  
If you select My Images, press the Options soft key, then select  
Erase Move, or Copy. The selected Erase or Move/Copy (to an  
,
My Ringtones, or My Sounds.  
Format Card — Erases the current contents of the optional  
Memory Card (if any) and replaces it with a set of folders needed by  
your phone.  
,
optional Memory Card) screen appears in the display.  
– Or –  
Note: This option prepares new, unformatted microSD™ Memory Cards for  
use with your phone. Repeated formatting of a Memory Card can  
shorten its service life. Erase files rather that format the Memory Card.  
If you select My Ringtones or My Sounds, press the Erase soft key.  
The associated Erase screen appears in the display.  
115  
 
2. Select the desired option.  
3. To format the Memory Card, press the Yes soft key.  
3. To delete/move selected photos or downloaded ringtones:  
4. To return to the Card Memory menu without formating the  
Memory Card, press the No soft key.  
Select My Images or My Music  
If you select My Images, press the Options soft key, then select  
Erase Move, or Copy. The selected Erase or Move/Copy (to phone  
.
Phone Info  
,
Phone Info lets you identify the hardware and software versions  
of your phone and to identify the phone number assigned to your  
phone.  
memory) screen appears in the display.  
– Or –  
If you select My Music, press the Erase soft key. The Erase Music  
screen appears in the display.  
Phone Number  
Mark individual files by highlighting each file, then pressing MARK  
This option causes the Phone Number screen to appear in the  
display and show the ten-digit number assigned to your phone by  
your Wireless Carrier.  
OK  
(
or  
); or mark all files by pressing the Mark All soft key.  
Press the Done soft key. You are prompted to confirm the  
erasure(s)/move(s).  
1. From the Settings menu, select Phone Info Phone  
Number. The phone number assigned by your Wireless  
Carrier appears in the display.  
To erase/move/copy the selected file(s), press the Yes soft key.  
To keep the selected file(s), press the No soft key.  
Formatting a Memory Card  
OK  
2. Press OK  
(
or  
) to return to the Phone Info menu.  
1. Insert an optional microSD™ Memory Card into your  
Icon Glossary  
This option causes the ICON GLOSSARY list to appear in the  
display and show the icons that can appear in the display and the  
names of the icons.  
2. From the Settings menu, select Memory Info Card  
Memory Format Card. You are prompted to confirm that  
you want to format the Memory Card.  
1. From the Settings menu, select Phone Info Icon  
Glossary.  
Settings  
116  
       
OK  
A list of the icons that can appear on the top line of the  
display shows in the display.  
2. Press the OK  
(
or  
) key to return to the Phone Info  
menu.  
OK  
2. Press OK  
(
or  
) to return to the Phone Info menu.  
Version  
You can view the PRL (Preferred Roaming List), ERI (Extended  
Roaming Indicator), software version, Browser version, @metro  
version, and hardware version on your phone. This feature is  
helpful if you need to contact Customer Service.  
1. From the Settings menu, select Phone Info Version.  
Hardware and software information for your phone  
appears in the display.  
OK  
2. Press the OK  
(
or  
) key to return to the Phone Info  
menu.  
MEID  
Lists the MEID number for your phone in decimal (MEID Dec) and  
hexadecimal (MEID Hex) formats.  
1. From the Settings menu, select Phone Info Version.  
MEID Dec and MEID Hex numbers for your phone appear in  
the display.  
117  
       
Section 14: Health and Safety Information  
Thissectionoutlinesthesafetyprecautionsassociatedwithusing  
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely  
use your phone.  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations, the National  
Counsel on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
For body worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
Health and Safety Information  
118  
       
contains no metal and that positions the handset a minimum of  
1.5 cm from the body.  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile phones and genuine  
Samsung accessories.  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
information.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines.  
Head: 1.42 W/Kg.  
Body-worn: 0.998 W/Kg.  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD  
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY  
DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE  
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER  
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS  
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
119  
     
Do wireless phones pose a health hazard?  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a  
series of Questions and Answers for consumers relating to radio  
frequency (RF) exposure from wireless phones. The FDA  
publication includes the following information:  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe.  
Wireless phones emit low levels of radio frequency energy (RF) in  
the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode. Whereas high levels of  
RF can produce health effects (by heating tissue), exposure to  
low level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies  
have suggested that some biological effects may occur, but such  
findings have not been confirmed by additional research. In some  
cases, other researchers have had difficulty in reproducing those  
studies, or in determining the reasons for inconsistent results.  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless  
phones with built-in antennas, often called "cell," "mobile," or  
"PCS" phones. These types of wireless phones can expose the  
user to measurable radio frequency energy (RF) because of the  
short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission  
safety guidelines that were developed with the advice of FDA and  
other federal health and safety agencies.  
When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF  
exposure decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-  
emitting consumer products such as wireless phones before they  
can be sold, as it does with new drugs or medical devices.  
However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level  
that is hazardous to the user. In such a case, FDA could require  
the manufacturers of wireless phones to notify users of the  
Health and Safety Information  
120  
 
health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that  
are sold in the United States must comply with FCC safety  
guidelines that limit RF exposure. FCC relies on FDA and other  
health agencies for safety questions about wireless phones.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a  
number of steps, including the following:  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF  
exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless  
phones.  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to  
the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human  
health.  
Base stations are thus not the primary subject of the safety  
questions discussed in this document.  
FDA belongs to an interagency working group of the federal  
agencies that have responsibility for different aspects of RF  
safety to ensure coordinated efforts at the federal level. The  
following agencies belong to this working group:  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research  
methods. Animal experiments investigating the effects of radio  
frequency energy (RF) exposures characteristic of wireless  
phones have yielded conflicting results that often cannot be  
repeated in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of  
the studies that showed increased tumor development used  
animals that had been genetically engineered or treated with  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
121  
cancer-causing chemicals so as to be pre-disposed to develop  
cancer in absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
phones, so we don't know with certainty what the results of such  
studies mean for human health.  
provide data that is directly applicable to human populations, but  
ten or more years' follow-up may be needed to provide answers  
about some health effects, such as cancer.  
This is because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if they do -  
may be many, many years. The interpretation of epidemiological  
studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any  
possible association between the use of wireless phones and  
primary brain cancer, glioma, meningioma, or acoustic neuroma,  
tumors of the brain or salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and  
with groups of investigators around the world to ensure that high  
priority animal studies are conducted to address important  
questions about the effects of exposure to radio frequency  
energy (RF).  
However, none of the studies can answer questions about long-  
term exposures, since the average period of phone use in these  
studies was around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs  
that has driven the establishment of new research programs  
around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
A combination of laboratory studies and epidemiological studies  
of people actually using wireless phones would provide some of  
the data that are needed. Lifetime animal exposure studies could  
be completed in a few years. However, very large numbers of  
animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists. Epidemiological studies can  
Health and Safety Information  
122  
FDA and Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations.  
away from your body or use a wireless phone connected to a remote  
antenna.  
Again, the scientific data do not demonstrate that wireless  
phones are harmful. But if you are concerned about the RF  
exposure from these products, you can use measures like those  
described above to reduce your RF exposure from wireless phone  
use.  
CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The  
CRADA will also include a broad assessment of additional  
research needs in the context of the latest research  
developments around the world.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of  
wireless phones, including children and teenagers. If you want to  
take steps to lower exposure to radio frequency energy (RF), the  
measures described above would apply to children and  
teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the  
RF source will reduce RF exposure.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not  
know that there is - it is probably very small. But if you are  
concerned about avoiding even potential risks, you can take a  
few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a  
wireless phone will reduce RF exposure.  
Some groups sponsored by other national governments have  
advised that children be discouraged from using wireless phones  
at all. For example, the government in the United Kingdom  
distributed leaflets containing such a recommendation in  
December 2000.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the source  
of the RF, since the exposure level drops off dramatically with distance.  
For example, you could use a headset and carry the wireless phone  
They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to  
limit wireless phone use by children was strictly precautionary; it  
123  
was not based on scientific evidence that any health hazard  
exists.  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields"  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption. In February 2002, the Federal trade  
Commission (FTC) charged two companies that sold devices that  
claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that hands-  
free kits reduce risks. Hands-free kits can be used with wireless  
phones for convenience and comfort. These systems reduce the  
absorption of RF energy in the head because the phone, which is  
the source of the RF emissions, will not be placed against the  
head. On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in  
the U.S. are required to meet safety requirements regardless of  
whether they are used against the head or against the body.  
Either configuration should result in compliance with the safety  
limit.  
According to FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped  
develop a detailed test method to measure electromagnetic  
interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now  
part of a standard sponsored by the Association for the  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Advancement of Medical instrumentation (AAMI). The final draft,  
a joint effort by FDA, medical device manufacturers, and many  
other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI. FDA has tested  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that  
accessories that claim to shield the head from those emissions  
reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
Health and Safety Information  
124  
wireless phones and helped develop a voluntary standard  
sponsored by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and performance  
requirements for hearing aids and wireless phones so that no  
interference occurs when a person uses a compatible phone and  
a compatible hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration:  
Road Safety  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful  
interference be found to occur, FDA will conduct testing to assess  
the interference and work to resolve the problem.  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of wireless  
phones, one that every user must uphold.  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(Updated 12/1/2006):  
When driving a car, driving is your first responsibility. When using  
your wireless phone behind the wheel of a car, practice good  
common sense and remember the following tips:  
FCC RF Safety Program:  
1. Get to know your wireless phone and its features, such as  
speed dial and redial. If available, these features help you  
to place your call without taking your attention off the road.  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
125  
 
3. Position your wireless phone within easy reach. Be able to  
access your wireless phone without removing your eyes  
from the road. If you get an incoming call at an  
7. Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with  
aware you are driving and suspend conversations that  
have the potential to divert your attention from the road.  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving;  
if necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice and even heavy  
traffic can be hazardous.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other  
local emergency number in the case of fire, traffic accident  
or medical emergencies.  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or  
other local emergency number, as you would want others  
to do for you.  
5. Do not take notes or look up phone numbers while driving.  
Jotting down a "to do" list or flipping through your address  
book takes attention away from your primary  
responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls  
when you are not moving or before pulling into traffic. Try  
to plan calls when your car will be stationary. If you need to  
make a call while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one  
appears injured, or a vehicle you know to be stolen, call  
roadside assistance or other special non-emergency  
number.  
Health and Safety Information  
126  
"The wireless industry reminds you to use your phone safely when  
driving."  
Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of  
sound produced by a portable audio device varies depending on  
the nature of the sound, the device settings, and the headphones  
that are used. As a result, there is no single volume setting that is  
appropriate for everyone or for every combination of sound,  
settings and equipment.  
For more information, please call 1-888-901-SAFE, or visit our  
.
Important!: If you are using a handset other than a standard numeric keypad,  
please call 1-888-901-7233.  
You should follow some commonsense recommendations when  
using any portable audio device:  
Provided by the Cellular Telecommunications & Internet  
Association.  
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
Responsible Listening  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations. Prolonged exposure to  
loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that  
using portable audio devices, such as portable music players and  
cellular telephones, at high volume settings for long durations  
may lead to permanent noise-induced hearing loss. This includes  
the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound  
has also been associated in some studies with tinnitus (a ringing  
in the ear), hypersensitivity to sound and distorted hearing.  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, you  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
127  
   
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
You can obtain additional information on this subject from the  
following sources:  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: (800) 222-2336  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch your phone off whenever it is forbidden to use  
it, or when it may cause interference or danger.  
When connecting the phone or any accessory to another device,  
read its user's guide for detailed safety instructions. Do not  
connect incompatible products.  
Health and Safety Information  
128  
   
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating position  
(held to your ear with the antenna pointing over your shoulder if  
you are using an external antenna).  
Should turn the phone OFF immediately if there is any reason to  
suspect that interference is taking place;  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless phone with such a device, consult your health care  
provider.  
UsingYourPhoneNearOtherElectronicDevices  
For more information see:  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone. Consult the manufacturer to discuss alternatives.  
FCC Hearing-Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless phones under the Hearing Aid Compatibility  
Act of 1988 (HAC Act) to require digital wireless phones be  
compatible with hearing-aids.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless phone and an implantable medical  
device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their  
implantable medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a  
buzzing, humming, or whining noise. Some hearing devices are  
more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
129  
     
The wireless telephone industry has developed a rating system  
for wireless phones, to assist hearing device users find phones  
that may be compatible with their hearing devices. Not all phones  
have been rated. Phones that are rated have the rating on their  
box or a label located on the box.  
is considered acceptable for normal use. A sum of 6 is  
considered for best use.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
In the above example, if a hearing aid meets the M2 level rating  
and the wireless phone meets the M3 level rating, the sum of the  
two values equal M5. This is synonymous for T ratings. This  
should provide the hearing aid user with "normal usage" while  
using their hearing aid with the particular wireless phone.  
"Normal usage" in this context is defined as a signal quality that  
is acceptable for normal operation.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to generate less interference to hearing devices than  
phones that are not labeled. T4 is the better/higher of the two  
ratings.  
The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M  
and T marks are recommended by the Alliance for  
Telecommunications Industries Solutions (ATIS). The U and UT  
marks are referenced in Section 20.19 of the FCC Rules.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless phone rating values are then added together. A sum of 5  
Health and Safety Information  
130  
   
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
in such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your phone off in  
health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
Users are advised to switch the phone off while at a refueling  
point (service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Vehicles  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Emergency Calls  
Switch your phone off in any facility where posted notices require  
you to do so.  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee connection in all  
conditions. Therefore, you should never rely solely on any  
wireless phone for essential communications (medical  
emergencies, for example).  
131  
   
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play  
with it because they could hurt themselves and others, damage  
the phone or make calls that increase your phone bill.  
FCC Notice and Cautions  
FCC Notice  
To make an emergency call:  
1. If the phone is not on, switch it on.  
The phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to  
stop using the phone if such interference cannot be eliminated.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
Vehicles using liquefied petroleum gas (such as propane or  
butane) must comply with the National Fire Protection Standard  
(NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
Cautions  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
phone warranty if said accessories cause damage or a defect to  
the phone.  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your phone may be the only means of communication at the  
scene of an accident; do not cut off the call until given  
permission to do so.  
Health and Safety Information  
132  
 
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the  
signal strength in your area. Your phone informs you of the  
current signal strength by displaying a number of bars next to the  
signal strength icon. The more bars displayed, the stronger the  
signal.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
If you're inside a building, being near a window may give you  
better reception.  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
Understanding the Power Save Feature  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both installed  
or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
If your phone is unable to find a signal after searching, a Power  
Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability or you can check it  
yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays  
on the screen. When a signal is found, your phone returns to  
standby mode.  
Switch your phone off before boarding an aircraft. The use of wireless  
phone in aircraft is illegal and may be dangerous to the aircraft's  
operation.  
Understanding How Your Phone Operates  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Your phone is basically a radio transmitter and receiver. When it's  
turned on, it receives and transmits radio frequency (RF) signals.  
When you use your phone, the system handling your call controls  
the power level. This power can range from 0.006 watts to 0.2  
watts in digital mode.  
133  
   
Maintaining Your Phone's Peak Performance  
features are available for purchase or use in all areas.  
Downloadable Ring Tones may be available at an additional cost.  
Other conditions and restrictions may apply. See your service  
provider for additional information.  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Faulty service may void the  
warranty.  
Battery Standby and Talk Time  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
Standby and talk times will vary depending on phone usage  
patterns and conditions. Battery power consumption depends on  
factors such as network configuration, signal strength, operating  
temperature, features selected, frequency of calls, and voice,  
data, and other application usage patterns.  
To ensure that the Hearing Aid Compatibility rating for your phone is  
maintained, secondary transmitters such as Bluetooth and WLAN  
components must be disabled during a call. For more information,  
Battery Precautions  
If your phone is equipped with an external antenna, hold the phone  
with the antenna raised, fully-extended and over your shoulder.  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you  
suspect damage to the phone or battery, take it to a service center for  
inspection.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the  
internal antenna could inhibit call performance.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in  
serious safety hazards.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it is inoperable, call Customer Care for service.  
If you use the phone near the network's base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may  
require additional subscription and/or usage charges. Not all  
Follow battery usage, storage and charging guidelines found in the  
user’s guide.  
Health and Safety Information  
134  
     
Battery charging time depends on the remaining battery charge and  
the type of battery and charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily not  
work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below  
0 °C (32 °F).  
If left unused, a fully charged battery will discharge itself over time.  
Do not place the phone in areas that may get very hot, such as on or  
near a cooking surface, cooking appliance, iron, or radiator.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave the battery  
connected to a charger for more than a week, since overcharging may  
shorten its life.  
Do not get your phone or battery wet. Even though they will dry and  
appear to operate normally, the circuitry could slowly corrode and  
pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and - terminals of the battery (metal strips on the  
battery), for example when you carry a spare battery in a pocket or  
bag. Short-circuiting the terminals may damage the battery or the  
object causing the short-circuiting.  
Do not use incompatible cell phone batteries and chargers. Some Web  
sites and second-hand dealers, not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Do not permit a battery out of the phone to come in contact with metal  
objects, such as coins, keys or jewelry.  
Misuse or use of incompatible phones, batteries, and charging devices  
could result in damage to the equipment and a possible risk of fire,  
explosion, leakage, or other serious hazard.  
Do not crush, puncture or put a high degree of pressure on the battery  
as this can cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some  
areas, the disposal of batteries in household or business trash may be  
prohibited. For safe disposal options for Li-Ion batteries, contact your  
nearest Samsung authorized service center. Always recycle. Do not  
dispose of batteries in a fire.  
Extreme temperatures will affect the charging capacity of your battery:  
it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
135  
Do not paint the phone. Paint can clog the device's moving parts and  
prevent proper operation.  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will help  
you fulfill any warranty obligations and allow you to enjoy this  
product for many years.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized antennas  
or modified accessories may damage the phone and violate  
regulations governing radio devices.  
Keep the phone and all its parts and accessories out of the reach of  
small children.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts  
may be damaged.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Health and Safety Information  
136  
 
Section 15: Warranty Information  
Standard Limited Warranty  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the original purchaser ("Purchaser") that SAMSUNG's  
Phones and accessories ("Products") are free from defects in  
material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
This Limited Warranty covers batteries only if battery capacity  
falls below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals on the  
battery are broken or show evidence of tampering, or (iii) the  
battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number  
What are SAMSUNG's Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG's sole  
option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
137  
       
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and  
the sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-  
4357. Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall  
become the property of SAMSUNG.  
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY  
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and  
labor charges for the repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED  
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND  
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
Warranty Information  
138  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO  
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY  
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR  
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY  
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
139  
Precautions for Transfer and Disposal  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Phone: 1-888-987-HELP (4357)  
©2008 Samsung Telecommunications America. All rights  
reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Warranty Information  
140  
Index  
Disabled 51  
Expired 52  
Removing 51  
Restoring 52  
Auto Answer 105  
Auto Retry 105  
Call Functions 20  
Answering a Call 24  
Making a Call 20  
Call Notification Types 24  
Call Settings  
Auto Answer 105  
Auto Retry 105  
Call Answer 105  
Data Settings 107  
TTY Mode 106  
Voice Privacy 106  
Call Timer 29  
Call Waiting 25  
Caller ID 25  
Calls  
Call Timer 29  
Data Counter 29  
Erase Logs 28  
Incoming 27  
Missed 28  
Outgoing 27  
Store Numbers 30  
Calls Menu 26  
Symbols  
@metro 50  
On-Line Help 51  
Settings 50  
Numerics  
2-Sec Pause 41  
B
A
Backlight 102  
Banner 102  
Battery 4  
Charging 5  
Low Battery Indicator 6  
Removal 5  
Travel Adapter 6  
Brightness, Pictures 77  
Buying New Apps 51  
C
Calculator 95  
Calendar  
Accessing Your Phone’s Settings 100  
Accessing Your Phone’s Tools 87  
Adding a New Contacts Entry  
Dial Method 39  
Menu Method 40  
Adjust  
Key Tone 104  
Ringer Setting 18, 24  
Alarm Clock  
When an Alarm Sounds 93  
Alarm clock  
Turn Off the Alarm 94  
Alerts 104  
View an Event 90  
Call Answer 25, 105  
Call Answer Mode 16  
Call Block 25  
Apps  
Buying 51  
141  
   
Camera  
Options 77  
Screen 76  
Screen Icons 76  
Self Timer 77  
Shortcuts 77  
Taking Pictures 75  
Camera Mode 19  
Camera Resolution, Notes About 77  
Camera Screen 76  
Canned Message Text  
Editing and Entering 66  
Change Lock 108  
Change Text Entry Modes 33  
Clear Key 14  
Contacts 37  
Add Pauses 41  
Adding 39  
Deleting 49  
Edit Name and Numbers 41  
Editing 41  
Erase All 110  
Finding 38  
Groups 46  
Metro411 49  
Opening 37  
Saving Call Numbers 43  
Speed Dial 45  
Emergency #s in Lock Mode 110  
Emergency Numbers 109  
End Key 14  
Entering Text 33  
Entering Numbers 35  
Entering Symbols 36  
Using T9 Mode 34  
Erase All Entry 110  
Erase Logs 28  
Erase Messages 64  
Exit metroWeb 68  
Expired Apps 52  
G
Create Messages 53  
D
Data Counter 29  
Data Settings 107  
Data, View Counters 29  
Delay Pictures 77  
Dialing Font Size 102  
Disabled Apps 51  
Display 100  
Display Screen Icons 15  
Display Settings  
Backlight 102  
Gallery  
Image 81  
General Message Settings 65  
Getting Started 4  
Activating Your Phone 6  
Understanding this User Manual 4  
Voicemail 7  
Go Back One Menu 31  
GPS Setting 100  
H
Banner 102  
Dialing Font Size 102  
Theme 101  
Wallpaper 101  
Draft Folder 62  
Draft Messages 62  
E
Edit Contacts Name and Numbers 41  
Emergency 109  
HAC 129  
Hardware Version, Viewing 117  
Memory Info 49  
142  
Health and Safety Information 118  
I
Icon Glossary 116  
Icons  
Number Type 40, 44, 45  
Ignore Calls 26  
Inbox Folder 59  
Incoming Calls 24  
Incoming Calls Menu 27  
Input Mode 16  
L
Language 107  
Left Soft Key 13  
Lock Code, Changing 108  
Lock Mode 17  
Lock Phone 108  
M
Memory Info Settings  
Card Memory 115  
Phone Memory 114  
Save Options 114  
Memory Management 114  
Menu Navigation 31  
Message Folder  
Draft Box 62  
Inbox 59  
Outbox 60  
Voice 64  
Voicemail 64  
Message folder  
outbox 60  
Message Folders  
Erase Messages 64  
Message Settings, General 65  
Messages  
Launching metroWeb 68  
Using Links 69  
Using metroWeb 68  
Missed Calls Menu 28  
Mobile Shop  
Shopping and Downloading 50  
Mode  
Call Answer 16  
Camera 19  
Input 16  
Lock 17  
Silent 18  
Standby 17  
Talk 17  
Vibrate 18  
M-Ratings 130  
Msg Setting Sub Menu 65  
Multimedia 75  
N
Navigation Key 14  
Navigation Key Shortcuts 31  
Notes and Tips 4  
Notes, Description 4  
Number Type Icons 40, 44, 45  
MEID 117  
Memory Card  
Formatting 116  
Install 7  
Managment 115  
Remove 8  
Creating 53  
Receive in Call 54  
Types of Messages 53  
Messages and Lock Mode 60  
Metro411 49  
metroWeb  
How metroWeb Keys Work 69  
Memory Info 114  
143  
Receiving 58  
Send in Camera Mode 54  
Pictures  
Brightness 77  
Quality 78  
Security Settings  
Change Lock 108  
Emergency # 109  
Erase All Entries 110  
Lock Phone 108  
Reset Phone 110  
Restriction 111  
Security Sub Menu 108  
Self Timer 77  
Send Key 14  
Settings  
Auto Answer 105  
Auto Retry 105  
Backlight 102  
O
OK Key 13  
Outbox Folder 60  
Outbox, Reviewing Messages 61  
Outgoing 27  
Shutter Sounds 80  
Zooming in 77  
P
Pause Dial 21, 42  
Pauses, Adding 41  
Phone Info  
Q
Quality, Pictures 78  
QWERTY Keypad 33  
R
Receive Messages in Call 54  
Receive Picture Messages 58  
Receive Text Messages 54  
Removing Apps 51  
Reset Your Phone 110  
Restoring Apps 52  
Restriction 111  
Return to Last Menu 31  
Reviewing Outbox 61  
Right Soft Key 13  
Ringer Type 104  
S
Icon Glossary 116  
MEID 117  
Phone Number 116  
Phone Number 116  
Phone Safety 128  
Phone Settings  
Airplane Mode 107  
Language 107  
NAM Selection 111  
Quick Search 113  
Security 108  
Banner 102  
Call Answer 105  
Data Settings 107  
Dialing Font Size 102  
Language 107  
Location Setting 100  
Memory Info 114  
Ringer Type 104  
Theme 101  
Set Time 112  
System Select 112  
Picture Message Settings 66  
Picture Messages  
Online Viewing 58  
TTY Mode 106  
Voice Privacy 106  
SAR Values 118  
Save a Number After a Call 43  
144  
Volume 103  
Wallpaper 101  
Settings Menu  
Accessing 100  
Settings, Picture Messages 66  
Settings, Text Messages 66  
Shortcut to Menus 32  
Shutter Sounds 80  
Silence Ringer 26  
Silent Mode  
Entering 18  
Exiting 18  
Software Version, Viewing 117  
Sound Settings  
Ringer Type 104  
Text Entry Mode 33  
Changing 33  
Text Message Settings 66  
Text Messages, Receiving 54  
Text Modes  
Understanding Your Contacts 37  
Adding a New Contacts Entry 39  
Contacts Groups 46  
Deleting a Contacts Entry 49  
Editing an Existing Contacts  
Entry 41  
Finding a Contacts Entry 38  
Memory Info 49  
Metro411 49  
Save a Number After a Call 43  
Speed Dial 45  
Understanding Your Phone 9  
Closed View of Your Phone 9  
Command Keys 13  
Changing 33  
Theme 101  
Three-Way Calling 20  
Timer, Calls 29  
Timer, Camera 77  
Tip, Description 4  
Tools 87  
Add New Event 91  
Alarm Clock 93  
Calculator 95  
Display Screen 15  
Volume 103  
Calendar 90  
Memo Pad 92  
World Time 94  
Tools Menu  
Accessing 87  
Features of Your Phone 9  
Open View of Your Phone 11  
Using Abc Mode 35  
V
Standard Limited Warranty 137  
Standby Mode 17  
Store Emergency #s 109  
Store Numbers After a Call 43  
T
Taking Pictures 75  
Talk Mode 17  
Text Conventions 4  
Version 117  
T-Ratings 130  
TTY Mode 106  
U
Vibrate Mode 18  
View an Event, Calendar 90  
Voice Privacy 106  
UL Certification 119  
145  
Voice Setting  
About VoiceSignal 74  
Choice Lists 71  
Sensitivity 72  
Sound 73  
Voice Launch 74  
Voice SVC 70  
Voicemail  
Checking 64  
Folder 64  
Listening to 7  
Volume 103  
W
Wait 41  
Wallpaper 101  
Warranty Information 137  
World Time 94  
Z
Zooming, Pictures 77  
146  
147  

Superior W800I User Manual
Sony Ericsson Z320 User Manual
Sony Ericsson XPERIA ACRO IS11S User Manual
Sony Ericsson U1 User Manual
Seagate ST960822A User Manual
Roberts Radio CR9946 User Manual
Philips SAC2560 User Manual
Panasonic DF66EUC User Manual
Oricom PMR3000 User Manual
Nuance comm Nuance Dragon NaturallySpeaking v110 Premium With Headset K609A GC3 110 User Manual