Samsung Messager II SCH R560 User Manual

( S a m s u n g  
P O R T A B L E  
M O B I L E  
S C H - R 5 6 0 )  
T R I - B A N D  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
Printed in Korea.  
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its  
affiliates in the United States and/or other countries.  
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
microSD™ and the microSD logo are Trademarks of the SD Card Association.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
®
Using T9 Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 36  
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for  
3
Section 1: Getting Started  
This section explains how to start using your Messager™ II  
phone by activating your service, setting up your Voicemail, or  
getting an understanding of how this manual is put together.  
Text Conventions  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
appear in place of repeatedly-used procedural steps:  
Understanding this User Manual  
The chapters of this guide generally follow the same order as the  
menus and sub-menus in your phone. A robust index for quick  
reference to most features begins on page 160.  
highlight UsetheNavigationkey(  
)tomoveahighlighting  
effect onto a menu item or screen item of interest.  
select  
After “highlighting” a menu item or screen item,  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page 132.  
press the OK key  
to launch, access, or save a  
highlighted menu item or screen field of interest.  
Used in place of “select” in long “drill down”  
procedure steps.  
Notes and Tips  
Throughout this guide there is text that is set apart from the rest.  
These are intended to point out important information, quick  
methods for activating features, to define terms, and more. The  
definitions for these methods are as follows:  
Example: “...Settings  
Call Settings  
Call Answer...”  
Installing the Battery  
Notes: Explain alternative options within the current feature, menu, or  
sub-menu.  
Note: Your phone comes packaged with a partially charged rechargeable  
standard Li-Ion battery and travel adapter.  
Tips: Provide quick or innovative methods for performing functions  
related to the subject at hand.  
Important: Points out important information about the current feature  
that could affect performance, or even damage your phone.  
Important!: You must fully charge the battery the first time you use your  
phone, otherwise you could damage the battery.  
Getting Started  
4
                 
1. Insert the top end of the  
battery first, matching the  
gold contacts on the inside of  
the battery to those on the  
phone.  
3. Lift the battery (1) up at the  
bottom and away from the  
phone (2).  
Charging the Battery  
2. Press lightly on the bottom end of the battery down into the  
Your phone is powered by a rechargeable standard Li-Ion battery.  
Only use Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Use  
of other accessories may invalidate your warranty and may  
cause damage.  
phone until it slips into place.  
3. Press lightly down on the  
middle of the battery cover  
(1) and upward at the top (2)  
until the cover locks into  
place.  
Use the Travel Adapter  
The travel adapter included  
with your phone is a  
convenient, light-weight  
charger that rapidly charges  
your phone from any 120/220  
VAC outlet.  
Remove the Battery  
1. Press and hold the  
key to turn off the phone (if on).  
2. Press downward at the top  
of the battery cover (1) and  
lift the cover (2) up and  
1. Plug the large end of the Travel Adapter into a standard  
120 VAC or 220 VAC wall outlet.  
away from the phone.  
5
       
A blinking empty battery icon (  
have two to three minutes before the battery is too low to operate the  
phone.  
) and a tone sounding indicate you  
Important!: For connection to an electrical supply not located in North  
America, you must use an adaptor of the proper configuration for  
the power outlet. Use of the wrong adapter could damage your  
phone and void your warranty.  
If you continue to use your phone without charging its battery, the  
phone will shut down.  
2. Insert the smaller end of the Travel Adapter into the  
charger/accessory connector on the upper right side of  
your phone.  
Activating Your Phone  
Contact your Wireless Carrier and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
Turning Your Phone On  
1. With the phone  
closed, press and  
hold the  
key  
until the display  
lights.  
Important!: You must unplug the adapter before removing the battery from  
the phone during charging to avoid damage.  
Press  
Low battery indicator  
Note: As with any other radio-  
transmitting device, do not  
touch the antenna while  
using your phone as this  
can affect call quality and  
can cause the phone to  
operate at a higher power  
level than is necessary.  
& Hold  
The battery indicator (  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
) in the upper-right corner of the  
Internal  
Antenna  
Five bars (  
) indicate a full charge.  
) indicates a near empty battery.  
An empty battery icon (  
2. The phone begins searching for a network signal.  
Getting Started  
6
     
3. Once the phone finds a signal, the time, date, and day  
2. Follow the prompts in the new user tutorial to setup your  
appear near the top of the display.  
mail box.  
4. You’re now ready to place and receive calls.  
Listen to Voicemail  
1. In standby mode, press and hold the  
key or dial your  
Note: If you are outside of your carrier’s coverage or roaming area, the No  
Service icon (  
) appears at the top of the phone’s display. If you  
own mobile number to dial Voicemail. After connecting,  
you will hear your voice greeting.  
cannot place or receive calls, try later when service is available, or at  
another location.  
2. You are prompted to enter your password.  
Turn Your Phone Off  
Memory Card (Optional)  
With the phone closed, press and hold the  
or more seconds. Your phone powers off.  
key for two  
Your phone has a Memory Card slot on its right side, behind the  
battery cover. You can install a microSD™ card to provide  
additional memory for storing files (such as, sound files and  
photos) in your phone.  
Note: If your phone is on and you press  
for less than one second, the  
phone will not power off. This prevents your phone from being turned  
off accidentally.  
TM  
You can install a microSD card to provide additional memory  
Setting Up Your Voicemail  
for storing files (such as, sound files and photos) in your phone.  
Voicemail allows callers to leave voice messages, which can be  
retrieved any time.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Message menu) to view details of voice  
messages in your Voicemail box.  
1. In standby mode, press and hold the  
key or dial your  
own mobile number to dial Voicemail.  
7
       
Install a Memory Card  
3. Slowly release your pressure on the card. It will slide  
outward a short distance.  
1. Open the microSD cover on the left hand side of the phone,  
as shown.  
4. Remove the memory card from the memory card slot.  
5. If desired, install another memory card. (For more  
6. Replace the microSD cover.  
Correct  
Incorrect  
2. Make sure that the gold contacts of the card are face up,  
as shown, then carefully slide the memory card into the  
memory card slot until you feel it click into place.  
3. Replace the microSD cover.  
Remove a Memory Card  
1. Open the microSD cover on the right hand side of the  
phone.  
2. Carefully press the memory card inward until you feel it  
release.  
Getting Started  
8
         
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also  
describes the screen format and the icons that will be displayed  
when the phone is in use.  
Note: The Samsung Messager II supports the wireless Handsfree Profile  
(HFP) and OBEX profiles for Bluetooth® wireless technology. The  
Samsung Messager II does not support the Bluetooth serial port  
profile.  
Features of Your Phone  
Domestic and international voice and text messaging service (available  
on participating networks).  
Closed View of Your Phone  
High speed data (CDMA 2000 1xEVDO Technology)  
®
Bluetooth Stereo (v2.0) Wireless Technology (see Note)  
Global Positioning (GPS) Technology  
PIM Functions  
Picture and Video (MMS) Messaging  
Text (SMS) Messaging  
E-mail Messaging  
QWERTY Keypad  
Built-in 2.0 Megapixel Digital Camera-Camcorder  
Music Player (MP3 compatible, requires microSD™ memory card)  
Voice Dial  
Speakerphone  
9
         
Features  
8. Display — Indicates the status of your phone, including  
numbers dialed, feature and function screens, status  
icons, message indicators, signal strength, and so on.  
1. Volume Key — Lets you adjust the ring volume in standby  
mode, adjust the voice volume during a call, or mute the  
ringer during an incoming call.  
9. OK Key — In standby mode, launces the highlighted  
Widget. Pressing when navigating through a menu accepts  
the highlighted choice in a menu.  
2. Left Soft Key — Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom left corner of the Main LCD.  
10. Navigation Key / Jog Wheel — In Menu mode, lets you  
scroll through the phone menu options. In Standby mode,  
lets you access preset functions.  
3. Speakerphone Key — Lets you enable/disable  
speakerphone mode.  
11. Voicemail Key — Lets you speed dial your Voicemail  
4. SEND Key — Lets you place or receive a call. In standby  
account to review your voice messages.  
mode, press the key once to access the recent call log.  
12. Special Function Keys — Enters special characters.  
5. Memory Card Slot — Lets you insert a microSD™ memory  
card for additional storage of images, videos, music,  
ringtones, and recorded sound files.  
Performs various functions.  
13. Microphone — Lets the other party to a call hear you  
clearly when you are speaking to them.  
6. Alpha-numeric Keys — Use these keys to enter  
numbers, letters, and characters.  
14. Power/Accessory Connector — Used to plug in charging  
accessories and to connect any available accessory cables  
to your phone.  
7. Earpiece / Speaker — Lets you hear ringing and alert  
tones, alarm tones, and the other parties to calls.  
Understanding Your Phone  
10  
15. Right Soft Key — Used to navigate through menus and  
applications and to select the choice indicated at the  
bottom right corner of the Main Display.  
Open View (Front) of Your Phone  
16. CLR Key — Deletes characters from the display when you  
are in text entry mode. Press this key to return to the  
previous menu or screen when navigating features on your  
phone.  
17. END Key — Ends a call. If you press and hold the END key,  
the power goes On or Off. When you receive an incoming  
call, press to send the call to voicemail.  
18. Camera / Multimedia Key — Launches the Camera or  
the Multimedia menu of your phone.  
19. Voice Recognition Key — In standby mode, pressing and  
holding this key launches Voice SVC options.  
11  
   
Features  
1. Earpiece  
9. soft2 Key — Right soft key — Used to navigate through  
menus and applications and to select the choice indicated  
at the bottom right corner of the Main Display.  
/
Speaker — Lets you hear ringing and alert  
tones, alarm tones, and the other parties to calls.  
10. OK Key — In standby mode, launches the highlighted  
Shortcut Icon. When navigating through a menu, accepts  
the highlighted choice in a menu.  
2. Display — Indicates the status of your phone, including  
numbers dialed, feature and function screens, status  
icons, message indicators, signal strength, and so on.  
11. Back Clear Key — Deletes characters from the display  
/
3. soft1 Key — Left soft key — Used to navigate through  
menus and applications and to select the choice indicated  
at the bottom left corner of the Main LCD.  
when you are in text entry mode. Press this key to return to  
the previous menu or screen when navigating features on  
your phone.  
4. shift Key — Toggles ABC mode capitalization between  
12. Speakerphone Key — Lets you enable/disable  
ABC Abc, and abc.  
,
speakerphone mode.  
5. Messaging Key — Launches the Messages menu.  
13. SEND Key — Lets you place or receive a call. In standby  
6. Fn Key — Text Function Key — Toggles text entry mode  
mode, press the key once to access the recent call log.  
between ABC and 123/Sym modes.  
14. END Key — Ends a call. If you press and hold the END key,  
the power goes On or Off. When you receive an incoming  
call, press to send the call to voicemail.  
7. Space Key — Inserts a space character in a text entry.  
8. Arrow (Navigation) Keys — In menu mode, lets you scroll  
through the phone menu options. In standby mode, lets  
you access preset functions and navigate the Shortcut  
Icons .  
Understanding Your Phone  
12  
4. Headset Connector — Used to connect a headset or TTY  
Closed Rear View of Your Phone  
Command Keys  
Functions for the soft keys are defined by what appears above  
each in the display. There are two soft keys, the Left soft key  
(
or  
) and the Right soft key (  
or  
).  
Left Soft Key  
Some functions of the Left soft key are as follows:  
In standby mode, press the Menu (left) soft key (  
or  
) to show  
the Main Menu.  
When the Left soft key function is Edit, press the Edit (left) soft key  
or ) to edit a Contact.  
(
Right Soft Key  
Some functions of the Right soft key are as follows.  
In standby mode, press the Contacts (Right) soft key (  
launch the Contacts Find screen.  
When the Right soft key function is Options, press the Options (right)  
soft key ( or ) and a pop-up menu appears.  
When the Right soft key function is Back, press the Back (right) soft  
key ( or ) to back up one menu level.  
or  
) to  
1. Camera Lens — The lens of your built-in camera.  
2. Speaker Grill — Lets you hear ringing and alert tones,  
alarm tones, and the other parties to calls.  
3. Battery Cover — Lets you access your phone’s battery.  
13  
         
OK Key  
End Key  
In standby mode, press the OK key ( or  
) to launch the  
function or application linked to the icon highlighted in the Shortcut  
Icon Bar.  
Press and hold the End key  
to turn on your phone.  
once to disconnect a call.  
to return to standby mode from any menu, or to cancel the  
Briefly press  
Press  
In a menu, press the OK key ( or  
selection.  
) to accept the highlighted  
last input.  
Send Key  
In camera mode, press the Take key ( or  
to create a Picture message.  
) to take a photo or  
The Send key  
recall the last number(s) dialed, received, or missed.  
is used to answer calls, dial calls, and to  
When the OK key function is Edit, press the Edit key ( or  
edit a Draft message.  
) to  
Press  
Enter a number and briefly press  
Briefly press in standby mode to display a list of recent calls to  
and from your phone.  
once to answer calls.  
to make a call.  
Speakerphone Key  
The Speakerphone key (  
) is used to place your phone in  
Speakerphone mode, allowing you to use your phone handsfree  
and/or to share a call with others, such as in an office or  
conference room  
Press  
Press  
to the other call.  
twice in standby mode to call the most recent number.  
to pick up a waiting call. Press  
again to switch back  
Clear Key  
Navigation Key  
The  
numbers, text, or symbols from the display. You can also use the  
or key to return to a previous menu.  
C/Back Arrow key (  
or  
) is used to erase or clear  
Use the directional keys on the Navigation key  
to browse  
menus, sub-menus, and lists. Each directional key also acts as a  
shortcut to launch applications. (For more information, refer to  
If you enter an incorrect character, briefly press  
backspace (and delete) the character.  
or  
to  
To erase the entire sentence, press and hold  
or  
.
To back up one menu level, briefly press  
or  
.
Understanding Your Phone  
14  
           
Camera / Multimedia Key  
5. This line contains the Shortcut Icon bar. These icons act as  
shortcuts to directly access some of your phone’s features  
without using the menus.  
Use the Camera/Multimedia key (  
) on the lower right side of  
the phone to activate the camera built into your phone and to  
take pictures, and to activate the Multimedia menu of your  
phone.  
6. The bottom line of the display shows current soft key  
functions. The sample screen shows that pressing the Left  
Understanding the Display Screen  
soft key (  
or  
)
will display the Main Menu and  
1. The top line of your  
phone’s display contains  
icons that indicate network  
status, battery power,  
signal strength, connection  
type, and more.  
1
2
pressing the Right soft key (  
or  
) will launch the  
Contacts Find screen.  
Rotated Screens  
3
With the QWERTY keypad  
open, the display rotates  
automatically from portrait  
mode (as shown above) to  
landscape mode (as shown  
here).  
4
5
2. The Auto Answer icon  
appears beneath the  
6
current date to indicate  
that the Auto Answer function is active. (For more  
Display Screen Icons  
3. The center portion of the display shows information such  
Your Samsung Messager II phone can show you definitions of the  
icons that appear on the top line of the display.  
as call progress information, messages, and photos.  
To access the Icon Glossary:  
4. This line contains the calendar and clock showing the  
current day of the week, date, and time.  
15  
     
In standby mode, press the Menu soft key, then select  
Backlights  
Settings Phone Info Icon Glossary.  
Backlights illuminate the display and the keypad. When you press  
any key or open the phone, the backlights come on. They go off  
when no keys are pressed within a period of time set in the  
Backlight menu.  
A list appears showing all of the icons that can appear on  
the top line of the display.  
Dialogue Boxes  
Note: During a phone call, the display backlight dims when you press  
and turns off after 10 seconds to conserve battery power, unless the  
Backlight setting is Always On, then the backlight dims after 20  
seconds and turns off after 1 minute.  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Dialogue boxes and their  
definitions are outlined below.  
Choice  
Reconfirm  
Your Phone’s Modes  
Call Answer Mode  
Example: “Save Message?”  
Example: “Erase All Messages?”  
Performing  
You can choose to answer a call by pressing any key except the  
Example: “Sending...” “Connecting...”  
key or  
key, by pressing only the  
key, or by  
Completed  
Example: “Message Saved”  
Information  
Error  
Input mode  
Example: “New Message”  
Input mode determines how you enter text, numbers, and  
symbols. While at any text entry screen, press the Left soft key  
Example: “System Error!”  
Warning  
Example: “Low Battery,” “Memory Full!”  
(
or  
menu using the Navigation key. Available input modes are:  
Phone keypad T9 Word Abc 123, and Symbols  
), then choose the input mode from the pop-up  
,
,
.
Understanding Your Phone  
16  
         
QWERTY keypad  
Abc and 123/Sym  
.
To unlock the keys, press the Unlock soft key, then press  
.
Device Lock Mode  
To lock the device  
:
Note: With the QWERTY keypad open, use 123/Sym mode instead of Abc to  
In standby mode, press the Menu soft key, then select Settings  
enter symbols and punctuation in your text. To switch between these  
Phone Settings  
Security. You are prompted to enter the device  
modes, press the  
key.  
lock code (password).  
Enter the Code (usually the last four digits of the phone number  
assigned to your Samsung Messager II). The Security menu appears in  
the display.  
Tip: With the phone closed, you can cycle between T9 Word, Abc, and 123  
by pressing and holding the  
cycle.  
key until the phone beeps, for each  
Select Lock Phone  
display, and you are returned to standby mode.  
To unlock the device  
Lock. “Device lock mode set” appears in the  
Lock Modes  
:
When the phone is in either Key Lock Mode or Device Lock Mode,  
restrictions are placed on phone use. You can receive calls and  
messages, but cannot place outgoing calls (except for  
emergency numbers) until you unlock the phone. Lock Modes  
also restrict access to menus and the Volume key.  
Press the Unlock soft key, You are prompted to enter the device lock  
code (password).  
Enter the Lock Code (usually the last four digits of the phone number  
assigned to your Samsung Messager II). You are returned to standby  
mode.  
Manual Keypad Lock Mode  
To lock the keys, in standby mode, press and hold  
Keypad is locked!” pops-up in the display.  
To unlock the keys, press the Unlock soft key, then press  
until  
.
Standby Mode  
Automatic Key Lock Mode  
Standby mode is the state of the phone once it has found service  
and is idle. The phone goes into standby mode:  
To lock the keys, in standby mode, press the Menu soft key, then  
select Settings Phone Settings Auto Key Lock On. (For  
After you power the phone on.  
When you press after a call or from within a menu.  
17  
       
In standby mode, you will see the time, day, and date as well as  
all phone status icons.  
To place your phone in Speakerphone Mode:  
Press and hold the Speakerphone key ( ) until  
Place Calls in Standby Mode  
Speakerphone On” appears in the display.  
1. While in standby mode, enter a phone number, and press  
to place a call.  
Caution!: Keep the phone away from you ear while in Speakerphone Mode.  
2. Press  
to return to standby mode.  
Receive Messages in Standby Mode  
To disable Speakerphone Mode:  
You can receive messages in standby mode. An alert tone sounds  
and a notification message appears in the display when a new  
message arrives. The following call message options appear:  
Press and hold  
the display.  
until “Speakerphone Off” appears in  
Note: Your phone automatically enters Speakerphone Mode when you dial a  
View Now — This selection allows you to view the message now.  
View Later — This selection allows you to view the message at a  
later date.  
call using the QWERTY keypad and the called phone begins ringing.  
Enter/Exit Silent Mode  
Highlight the desired viewing option and then press  
.
Silence the tones your keypad makes when you press a key.  
Talk Mode  
To enter Silent Mode:  
In standby mode, press and hold  
You can place and receive calls only when your phone is on.  
. “Entering Silent  
While in a call your phone is in talk mode. Press the Options soft  
key to display a list of menu options. (For more information, refer  
Mode” briefly appears in the display and your phone  
returns to standby mode.  
To exit Silent Mode:  
Speakerphone Mode  
Lets you use your phone handsfree or to share a call with other  
people nearby.  
Understanding Your Phone  
18  
       
While in Silent mode and standby mode, press and hold  
. “Exit Silent Mode” briefly appears in the display  
and your phone returns to standby mode.  
Note: The Vibrate icon ( ) appears in the display when the phone is in  
Vibrate mode. The Vibrate/Ring icon (  
when the phone is in Vibrate/High mode.  
) appears in the display  
Camera Mode  
Vibrate Mode  
Camera mode lets you activate your phone’s camera to take  
pictures. In Camera mode, you can also adjust the resolution and  
appearance of your pictures.  
In standby mode, repeatedly press the Volume key  
) down until Vibrate appears in the display.  
The Volume key is on the upper left side of phone.  
(
Adjust the Ringer  
1. In standby mode, press the Volume key (  
left side of the phone Up or Down.  
) on the  
Entering Camera Mode — In standby mode, press and hold the  
Camera key ( ) — on the lower right side of the phone.  
Exiting Camera Mode — Press the key.  
Options are:  
Camcorder Mode  
Ringer Off  
Vibrate  
Low  
Medium  
Medium/High  
High  
Camcorder mode lets you activate your phone’s camera to take  
videos. In Camcorder mode, you can also adjust the resolution  
and appearance of your videos.  
Low/Medium  
Vibrate/High  
2. When you are satisfied with the setting, press  
or  
.
Your phone returns to standby mode.  
Entering Camcorder Mode — In standby mode, press the Camera  
key ( ) — on the lower right side of the phone — then select  
Camcorder  
Exiting Camcorder Mode — Press the  
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the  
Menu soft key, then pressing the  
,
,
, and  
keys. Use the  
Volume key on the left side of your phone to adjust the ringer volume  
setting.  
.
key.  
19  
           
Music Player Mode  
Music Player mode lets you activate you phone’s Music Player to  
play music files loaded onto an optional microSD™ Memory  
Card.  
Entering Music Player Mode  
soft key, then select Multimedia Music Player  
Exiting Music Player Mode — Press the key.  
In standby mode, press the Menu  
.
Video Player Mode  
Video Player mode lets you activate your phone’s Video Player to  
play videos (.3G2 files — taken with your phone’s Camcorder —  
or downloaded .MP4 files) up to 1 hour in length.  
Entering Video Player Mode — In standby mode, press the Camera  
key ( ) — on the lower right side of the phone — then select My  
Video, then select a video file. The Video Player begins playing.  
Exiting Video Player Mode — Press the key.  
Understanding Your Phone  
20  
Section 3: Call Functions  
This section provides procedures for making and answering  
calls. This section also describes features, such as call logs and  
call timers, that help you make calls and manage your call time.  
easily dispatch aid, such as police, fire fighting, and emergency  
medical personnel.  
1. With the phone on, enter the Emergency Number you wish  
to call using the keypad.  
Note: The procedures in this section can be performed using the phone  
keypad or the QWERTY keypad.  
Note: You can define up to 3 emergency numbers in your phone. (For more  
Tip: When using the QUERTY keypad, it is recommended that you also use an  
optional headset or an optional handsfree car kit or that you place your  
2. Press  
to place the call.  
Tip: If you need to make an emergency (911) call with Airplane mode  
enabled, just dial the emergency number and press  
. (For more  
Making a Call  
1. With the phone on, enter the number you wish to call using  
Three-way Calling  
the keypad.  
Call two other numbers and connect them to your call using  
three-way calling.  
2. Press  
to place the call.  
Emergency Calls  
1. In standby mode, enter the number for the first party in  
your call, then press  
2. When connected, ask the other party to remain on the line.  
Press to place them on hold.  
3. Enter the second party’s phone number and press  
.
When you call an Emergency Number, such as 911, your  
Samsung Messager II phone locks itself in emergency mode, only  
allowing you to make calls to the emergency call center you  
originally contacted. This enables emergency operators to more  
.
21  
       
1-Touch Dialing  
4. When the second party answers, press  
to connect all  
three parties.  
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)  
through 9.  
Manual Pause Calling  
In standby mode, press and hold the number key  
To manually call a number with pause(s) without storing it in your  
Contacts list:  
corresponding to the desired Contact’s speed dial number.  
1. In standby mode, enter the number you wish to call.  
Example: To speed dial the Contact assigned speed dial 5, press and hold  
or  
.
2. Press the Options soft key. The following pause options  
appear in the display:  
2-Touch Dialing  
2-Sec Pause — A 2-second pause after which dialing resumes.  
Use 2-touch dialing to speed dial Contacts from 10 through 99.  
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
Wait — A hard pause (waits for input from you).  
3. Highlight the desired pause.  
4. Press the key or the  
pause into the number sequence.  
key to enter the highlighted  
2. Press and hold the number key representing the second  
5. Press  
to call the number.  
digit of the desired Contact’s speed dial number.  
Tip: Press the Save soft key to store pauses along with the number if you  
Example: To speed dial the Contact assigned speed dial 35, press  
then press and hold or  
or  
plan to call the number frequently.  
.
Speed Dialing  
3-Touch Dialing  
Speed Dialing lets you place a call to any Contact stored in your  
Contacts list by dialing the Contact’s Location number.  
Use 3-touch dialing to speed dial Contacts from 100 through 999.  
Call Functions  
22  
 
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
Use the Call command to dial any number stored in your  
Contacts list by saying the name of the contact (Name Dialing).  
You can also use Call to dial any telephone number, even  
numbers not stored in your contact list, by speaking the  
individual digits in the number (Digit Dialing).  
2. Press the number key representing the second digit of the  
desired Contact’s speed dial number.  
Voice Dialing Tips:  
Wait for the beep before speaking.  
3. Press and hold the number key representing the third digit  
Speak clearly at a normal volume, as if you were talking to someone  
on the phone.  
of the desired Contact’s speed dial number.  
Example: To speed dial the Contacts entry assigned to speed dial 325, press  
When saying a name, say the first name then the last name.  
or  
.
, press  
or  
, then press and hold  
or  
Dialing a Name  
To dial a name, do the following:  
Voice Dialing  
1. In standby mode, press and hold  
or  
.
The voice recognition capabilities of your Samsung Messager II  
are exceptional due to advanced, speaker-independent  
technology. This means you do not need to “train” your phone to  
understand your voice. You can use your voice in a natural  
manner to dial numbers.  
Say a command” appears in the display and is  
pronounced through the earpiece.  
2. Say, “Call”.  
You are prompted to “Say the name or number”.  
Note: End Calls Before relaunching the VoiceSignal voice recognition  
software — When you use Voice Dialing to make a call, you must end  
that call before you can use other Voice Commands. See “Voice SVC”  
3. Speak clearly and say the name of a person in your  
Contacts list, first name followed by last name.  
If the name is recognized, Voice Dial repeats the name and  
dials the number.  
23  
 
If Voice Dial is not sure which name you said, it displays a  
choice list of up to three names and prompts you with “Did  
you say?” followed by the first name on the list.  
1. In standby mode, press and hold  
or  
.
Say a command” appears in the display and is  
pronounced through the speaker.  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
information.)  
2. Say “Call”.  
VoiceSignal prompts you to “Say the name or number.”  
3. Speak clearly and say the telephone number of the person  
you want to call.  
Press the Repeat soft key to say the name again.  
Press to exit VoiceSignal without dialing.  
For example, say “7 8 1 9 7 0 5 2 0 0."  
If it recognizes the number, Voice Dial repeats it and dials  
the number. If Voice Dial is not sure it has recognized the  
number, it displays a choice list of up to three numbers and  
prompts you with “Did you say?” followed by the first  
number on the list.  
If the recognized name has multiple numbers stored for it  
(that is, Mobile, Work, Home, and so on), Voice Dial  
displays the possible choices and prompts you with  
Which number?”  
5. Say one of the following number types:  
4. Say “Yes” to confirm the number or “No” to hear the next  
one, or use the keypad to select the correct number from  
information.)  
Home  
Work  
Mobile  
Voice Dial dials the specified number.  
Press the Repeat soft key to say the name again.  
Press to exit VoiceSignal without dialing.  
Dialing a Number  
To dial a number using Voice Dial, do the following:  
Call Functions  
24  
Pause Dialing From a Contacts Entry  
Call Notification Features  
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for  
the pauses to pass and the dialing to complete.  
Your phone notifies you of a call in a variety of ways.  
Eight ring volume settings: Ringer Off  
Medium Medium/High High, or Vibrate/High  
Different ring types or melodies to distinguish callers.  
,
Vibrate, Low, Low/Medium,  
If you voice dial a contact that contains Wait(s), wait for the appropriate  
prompt(s) from the number you are calling (credit card number, bank  
account number, and so on) and enter the appropriate response(s).  
,
,
.
Name display with caller ID. (If the caller’s name is programmed into  
your Contacts).  
Answering a Call  
Information about the last 90 each of incoming, missed, and outgoing  
calls are automatically stored to a call log.  
Incoming  
When you receive a call, the phone displays one of the following:  
Set Call Ringer Volume  
If the caller can be identified, the caller’s number (or name if it’s in your  
Contacts) appears in the display.  
1. In standby mode, press the Volume key on the left side of  
If the caller cannot be identified, Call from unavailable # Call from  
,
the phone.  
restricted #, or no number appears in the display.  
2. Press the Volume key up or down to set the call ringer  
volume as desired.  
Tip: Assign pictures to Contacts entries. The entry’s assigned picture  
appears in the display when you receive a call from that entry. (See  
3. Once you’re satisfied with the setting, press  
or  
.
The phone returns to standby mode.  
The phone continues to notify you of the call until one of the  
following events occur:  
Tip: You can also enter the Volume > Voice Calls sub-menu from standby  
mode by pressing the Menu soft key, then selecting Settings Sound  
Settings Volume Voice Calls. Use the Volume key on the right side  
of your phone to adjust the ringer volume setting.  
You answer the call.  
The calling party ends the call.  
The call is sent to voicemail.  
25  
       
2. Press  
first call.  
3. Press  
to place the second call on hold and return to the  
to alternate between calls.  
Note: The Vibrate icon (  
) appears in the display when the call ringer is  
set to Vibrate. The Vibrate/Ring icon (  
) appears in the display  
when the call ringer is set to Vibrate/High.  
Call Answer  
Caller ID  
Select from two methods for answering calls. This option can be  
changed in the Settings menu.  
Caller ID lets you identify who is calling you by displaying a  
caller’s number. If the caller’s name and number are stored in  
Contacts, the caller’s name also appears. If you’ve assigned a  
picture to the entry, it appears in the display as well.  
1. In standby mode, press the Menu soft key, then select  
Settings Call Settings Call Answer.  
Call Block  
The following options appear in the display:  
You can prevent your number from displaying on another phone’s  
caller ID screen by enabling Call Block.  
Any Key — Pressing any key except  
answers a call.  
,
, or  
1. In standby mode, press  
,
,
(or  
,
,
Send Key — Only pressing  
answers a call.  
).  
2. Select Call Answer option of your choice.  
2. Enter the number you wish to call, then press  
Silence an Incoming Ring  
.
Call Waiting  
If you’re on a call, your phone beeps when you receive a second  
call. Call Waiting lets you answer the second call and alternate  
between both calls.  
To temporarily silence the incoming call ringer:  
While your phone is ringing, press the Volume key  
), on the left side of the phone, up or down.  
(
Note: Contact your Wireless Carrier for availability.  
Ignore an Incoming Call  
1. Press  
to place the first call on hold, answer the second  
Ignored calls are immediately forwarded to Voicemail.  
call, and ask the caller to remain on the line.  
Call Functions  
26  
           
To ignore an incoming call:  
access this information for future reference, to return calls, and  
to add new Contacts. You can also view times for your last call  
and the total of all calls.  
While your phone is ringing, press the Ignore soft key. The  
incoming call is forwarded to Voicemail.  
In-Use Menu  
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and  
missed), briefly press  
while in standby mode. The All Calls screen,  
You can access a number of menus and features even while in a  
call.  
listing up to 270 of your most recent calls, appears in the display.  
Outgoing Calls  
1. While in a call, press the Options soft key. The following  
The last 90 outgoing calls are stored in the Outgoing calls log.  
Review the Outgoing calls log for the time and date of a call, as  
well as other information.  
options pop-up in the display:  
Message — Display the Messages menu.  
Contacts — Display the Contacts menu.  
Recent Calls — View your recent calls log.  
1. In standby mode, press the Menu soft key, then select  
Recent Calls Outgoing Calls. A list of your outgoing  
calls appears in the display.  
Send DTMF — Send your phone number as DTMF tones to the  
other person on the call.  
Location Turn your GPS location on or set GPS location for  
2. Highlight a call. You have the following options:  
emergency calls only.  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message screen appears in the display. (For more  
2. With the above menu displayed, do one of the following:  
Select a menu or feature to access the menu or activate the  
highlighted feature.  
To view further information about the call, press OPEN  
(
or  
Press the Cancel soft key to exit the menu.  
).  
Recent Calls  
Your phone has Call Logs that retain information about Outgoing,  
To access further options, press the Options soft key. The following  
options appear in the display:  
Incoming, and Missed Calls. The Recent Calls menu lets you  
Save — Save the number to your Contacts.  
27  
         
Details — Contacts calls only — Lets you view the Contacts entry for  
the recipient of this call.  
To access further options, press the Options soft key. The following  
options appear in the display:  
Erase — Erase the selected call from your Outgoing calls list.  
Save — Save the number to your Contacts.  
Lock/Unlock — Blocks/permits erasure of the selected call from your  
Outgoing call list.  
Details — Contacts calls only — Lets you view the Contacts entry for  
the originator of this call.  
Erase all — Erase all unlocked calls from your Outgoing call list.  
Erase — Erase the selected call from your Incoming calls list.  
View Timer  
Call Timer screen appears in the display listing the  
Lock/Unlock — Blocks/permits erasure of the selected call from your  
Incoming calls list.  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
Erase all — Erase all unlocked calls from your Incoming calls list.  
Select an option to perform its function.  
Incoming Calls  
View Timer  
Call Timer screen appears in the display listing the  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
The last 90 Incoming calls are stored in your phone’s Incoming  
calls log. You can review the Incoming calls log for time and date  
of each call, as well as other information.  
Select an option to perform its function.  
Missed Calls  
The last 90 missed calls (calls you did not answer) are stored in  
the Missed calls log. Review the Missed calsl log for the time and  
date of the call, as well as other information.  
1. In standby mode, press the Menu soft key, then select  
Recent Calls Incoming Calls. A list of your Incoming  
calls appears in the display.  
1. In standby mode, press the Menu soft key, then select  
Recent Calls Missed Calls. A list of your missed calls  
appears in the display.  
2. Highlight a call. You have the following options:  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message screen appears in the display. (For more  
2. Highlight a call. You have the following options:  
To view further information about the call, press OPEN  
(
or  
).  
Call Functions  
28  
       
Erase All Calls  
To compose and send a message to the caller, press the Msg soft  
key. The Send Message menu appears in the display. Select the  
1. In standby mode, press the Menu soft key, then select  
Recent Calls All Calls. The All Calls list appears in the  
display with the first call in the list highlighted.  
To view further information about the call, press OPEN  
(
or  
2. Press the Options soft key, then select Erase all. “Erase  
all entries?” prompts you to confirm erasure of all Calls  
log entries.  
).  
To access further options, press the Options soft key. The following  
options appear in the display:  
Save — Save the number to your Contacts.  
3. To Erase all calls, press the Yes soft key. To keep the calls,  
Details — Contacts calls only — Lets you view the Contacts entry for  
the originator or recipient of this call.  
press the No soft key.  
Call Timer  
Erase — Erase the selected call from your Missed calls list.  
Lock/Unlock — Blocks/permits erasure of the selected call from your  
View the duration of your last call, total calls, and calls made  
during the life of your phone using the Call timer feature. Call  
timer is not for billing purposes.  
Missed calls list.  
Erase all — Erase all unlocked calls from your Missed calls list.  
View Timer  
Call Timer screen appears in the display listing the  
1. In standby mode, press the Menu soft key, then select  
Recent Calls Call Timer. The following options appear  
in the display:  
number and types of calls and their total durations. (See “Call Timer”  
on page 29 for more information.)  
Select an option to perform its function.  
Erase Logs  
Last Call — Shows the duration of your last call.  
You can erase Outgoing, Incoming, Missed, or All Calls.  
Home Outgoing — Shows the number and total duration of all  
calls originated by your phone since the last reset.  
Home Incoming — Shows the number and total duration of all  
calls made to your phone since the last reset.  
29  
           
Roaming Calls — Shows the number and total duration of all  
calls originated by and made to your phone while roaming and  
since the last reset.  
1. In standby mode, press the Menu soft key, then select  
Recent Calls Data Counter. The following options  
appear in the display:  
All Calls — Shows the number and total duration of all calls  
originated by and made to your phone since the last erasure.  
Transmit — Shows the amount of data (in kilobytes) that your  
phone has transmitted since last being reset.  
Last Reset — Shows the date and time all counters, except  
Lifetime Calls, were reset.  
Received — Shows the amount of data (in kilobytes) that your  
phone has received since last being reset.  
Lifetime Calls — Shows the duration of all calls on your phone  
since activation (Lifetime timers cannot be reset).  
Total — Shows the amount of data (in kilobytes) that your phone  
has transmitted and received since last being reset.  
2. If desired, highlight a particular timer.  
• Last Reset — Shows date and time the Data Counters (except  
Lifetime Data Counter) were last reset.  
3. Press the Reset soft key to reset the highlighted timer.  
Press the Reset All soft key to reset all of the timers  
Lifetime Data Counter — Shows the amount of data (in  
kilobytes) that your phone has transmitted and received since being  
activated.  
except Lifetime Calls.  
4. Press  
to exit the Call Timer screen.  
2. To reset a timer other than Lifetime Data Counter, highlight  
the timer you want to reset and press the Reset soft key.  
Note: Although Total call timers can be erased, LifeTime call timers can  
never be erased.  
3. To reset all timers except Lifetime Data Counter, press the  
Reset All soft key.  
Data Counter  
4. Press  
to exit the Data Counter screen.  
Use Data Counter to view the amount of data that has been sent  
or received (or a total of both) using the data services that your  
phone supports. The Data Counter can be a helpful tool for  
monitoring data usage, especially if your service agreement has  
specified limits.  
Note: Although other data counters can be reset, only the Lifetime Data  
Counter can never be reset.  
Call Functions  
30  
     
Store Numbers from Call Logs  
6. Follow the prompts to store the number to Contacts.  
Store numbers from your Outgoing, Incoming, Missed, and All  
calls logs to Contacts.  
Tip: In standby mode, briefly press  
to display the Recent Calls list. You  
can then select any call in the list to save to Contacts.  
1. In standby mode, press the Menu soft key, then select  
Recent Calls.  
2. Press the corresponding number on the keypad to view  
call logs for the following call types:  
for Outgoing Calls  
for Incoming Calls  
for Missed Calls  
for All Calls  
3. Use the Up and Down navigation keys to highlight the  
number you wish to store in Contacts and press  
.
4. Press the Options soft key, then use the Up and Down  
navigation keys to highlight Save.  
5. Select Create New to add the number as a Contacts entry,  
or select Update Existing to find a Contact with which to  
associate the new number.  
31  
 
Section 4: Menu Navigation  
This section explains the menu navigation for your phone.  
Menu Navigation  
Menu Shortcuts  
Use shortcuts to quickly access menus and sub-menus. Press  
the Menu soft key, then press the number to the left of the menu  
label to jump to the desired menu, sub-menu, or feature.  
Access the menus and sub-menus in your phone using the  
Navigation key (  
and soft keys (  
) , the arrow keys (  
,
,
,
),  
or ), or use a shortcut.  
Example: To jump to the Outbox sub-menu, press the Menu soft key, then  
1. In standby mode, press the Menu soft key. The first of  
press  
Outbox.  
or  
(for Messages) and  
or  
for  
several menus appears in the display.  
2. Use the Navigation key to browse through the menus.  
Navigate Using Shortcut Icons  
3. Press  
or  
to enter the menu or sub-menu that  
You can also access menus and sub-menus using Shortcut Icons,  
and without the menu-based drill down.  
appears in the display.  
1. In standby mode:  
4. Press the Back soft key or press  
or  
to return to  
with the QWERTY keypad closed,  
press the Navigation key Left or  
Right to show the desired  
shortcut icon.  
the previous menu.  
Return to the Previous Menu  
Press the Back soft key to return to a previous menu.  
When Back does not appear in the display, press  
return to the previous menu.  
with the QWERTY keypad open,  
press the Navigation key Up or  
Down to show the desired  
shortcut icon.  
or  
to  
2. Press the OK soft key to  
launch the related application.  
Menu Navigation  
32  
               
Navigation Key Shortcuts  
Up Navigation  
Numeric Keypad Shortcuts  
In standby mode and with the QWERTY keypad closed, press the  
Navigation key Up or Down to launch the corresponding  
applications in the pattern shown here.  
Messages  
Messages  
Browser  
Down Navigation  
Quick Search Shortcut  
With Quick Search set to On, do the following to quickly access a  
Left  
Navigation  
Right  
Navigation  
menu option:  
Browser  
Note: In standby mode and with the QWERTY keypad open, the Navigation  
key shortcut pattern rotates 90o to match the screen.  
1. In standby mode, press the  
first few numeric keys that  
correspond to letters in the  
Menu option name.  
QWERTY Keypad Shortcuts  
In standby mode and with the QWERTY keypad open, you have  
the option of using the arrow keys on the QWERTY keypad itself  
to launch applications, as shown here.  
For example, to search for  
“Inbox” you would enter  
I
N
B
33  
     
2. Press the Navigation key  
Down. The Menu List screen  
appears in the display with  
the first matching menu  
option highlighted.  
3. Select the desired menu  
option.  
Menu Navigation  
34  
Section 5: Entering Text  
This section outlines how to select the desired text entry mode  
when entering characters using the phone keypad or the nested,  
QWERTY keyboard-style keypad. This section also describes how  
to use the T9 predictive text entry system to reduce the number  
of key strokes needed to enter text.  
Your Samsung Messager II has a built-in, keyboard-style keypad,  
commonly called QWERTY, that you can access by sliding it open  
from beneath the top section of the phone. This also  
automatically rotates the image in the display to show  
information in a wider, landscape format. Using the QWERTY  
keypad, you can type letters, numbers, punctuation, and other  
special characters into text entry fields or other applications  
simpler and faster than using the telephone keypad.  
Built-in QWERTY Keypad  
Display  
Changing the Text Entry Mode  
Text messages can be made up of alphabetical characters,  
numbers, and symbols. You can use the following text entry  
modes to simplify text entry:  
T9 Word — Press each phone key only once to enter the letter of the  
word that you’re spelling. T9 WORD mode letter options are:  
T9 Word — Enter initial capital letters  
T9 WORD — Enter all upper case letters  
T9 word — Enter all lower case letters  
Clear  
Key  
Note: T9 Word does not support the QWERTY keypad, which does not need  
this function.  
Left Soft  
Key  
Fn (Input  
Mode) Key  
Navigation  
Keys  
Right  
Soft Key  
Abc — Enter letters, numbers, and symbols by using the QWERTY  
keypad or by repeatedly pressing each phone key until the desired  
35  
                 
character (as shown on the key) appears in the display. ABC mode  
letter options are:  
Abc  
ABC  
Abc — Enter initial capital letters  
ABC — Enter all upper case letters  
abc — Enter all lower case letters  
123  
Symbols  
• Add T9 Word  
123 — Enter numbers by pressing the corresponding keys on the  
phone keypad or the QWERTY keypad.  
2. Select the desired text entry mode.  
®
Using T9 Mode (Phone Keypad Only)  
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into  
your message simply by pressing the keys labeled with the symbols you  
want.  
T9 Word recognizes commonly used words for the numeric  
sequence of key presses and inserts the word into your message.  
T9 Word is much faster than the traditional method of text entry  
(Abc) and requires only one key press per letter of the word that  
you’re spelling.  
Symbols — Using the phone keypad, enter a symbol into your  
message by pressing the number above the symbol in the Symbols  
pop-up window.  
1. While composing a text message, press the Left soft key,  
The current text entry mode (T9 Word, Abc, ABC, 123, or  
Symbols) is indicated in the lower part of a text entry screen. To  
change the text entry mode, do the following:  
then select T9Word.  
For practice, enter the word “Samsung” by pressing each of the  
following keys only once:  
1. While composing a text message, press the Left soft key.  
The following options appear in the display:  
T9word  
T9Word  
T9WORD  
abc  
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for the  
numeric sequence you just entered is “Samsung.”  
Entering Text  
36  
   
If more than one word shares the same numeric sequence, T9 Word  
provides the most commonly used word, any additional words appear in  
a pop-up window, in which you can select a desired word.  
Using the QWERTY keypad, press  
lower left corner of the display.  
until “Abc” appears in the  
Using the phone keypad, press the Left soft key, then select Abc  
.
2. Enter characters while in Abc mode by using one of  
Note: To enter a space, press  
. To enter a period, press  
. These key  
functions apply to both T9 Word and Abc modes. For other symbols,  
following keypads:  
Using the QWERTY keypad, press the key labeled with the desired  
character (such as, press  
for “G” and  
for “H”).  
Adding Words to the T9 Word Dictionary  
Using the phone keypad:  
If pressing the keys corresponding to a word you want to enter  
and then scrolling through the pop-up list does not display that  
word, do the following:  
Press the key repeatedly until the desired character appears in the  
display (such as, press once for “G” and twice for “H”).  
Pause briefly and the displayed character is accepted and inserted into  
your message.  
1. Clear the word by pressing and holding  
.
2. Change the text entry mode to Add T9 Word  
.
Press  
to enter a space and press  
to enter a period.  
Entering Numbers  
Enter numbers into a text message while in 123 mode.  
changing the text entry mode to Add T9 Word  
.
1. While composing a text message, do one of the following:  
3. Enter the word you want to add to the T9 Word dictionary.  
Using the QWERTY keypad, press  
in the lower left corner of the display.  
until “123/Sym” appears  
Note: In Add T9 Word mode, you enter a word using the same multiple  
keypress method as when in Abc text entry mode.  
Using the phone keypad, press the Left soft key, then select 123  
.
2. Enter numbers while in 123 mode by pressing the key  
labeled with the corresponding number that you wish to  
insert into your message.  
4. Press . The word is added to the T9 dictionary.  
Using Abc Mode  
1. While composing a text message, do one of the following:  
37  
       
Entering Symbols  
Enter symbols such as “@” or “%” into a text message.  
While composing a text message, enter symbols by using  
one of following keypads:  
Using the QWERTY keypad:  
Press  
until “123/Sym” appears in the lower left corner of the  
display, or press the Left soft key, then select Symbols  
.
Press the key(s) labeled with the corresponding symbol(s) that you wish  
to insert into your message, or use the Left and Right soft keys to page  
through the other symbols, if desired.  
Using the phone keypad:  
Press the Left soft key, then select Symbols. The first of three symbol  
screens appears in the display.  
Use the Left and Right soft keys to page through the other symbols, if  
desired.  
Press the key that corresponds with the symbol that you wish to enter.  
For example, press  
for an exclamation point (!).  
Repeat these steps to insert additional symbols into your message.  
Entering Text  
38  
   
Section 6: Understanding Your Contacts  
This section details how you can manage your daily contacts by  
storing their names and numbers in your Contacts list. You can  
have your Contacts entries sorted by name.  
Open Contacts  
1. In standby mode, press the Menu soft key, then select  
Contacts.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
The following options appear in the display:  
Find — Find a phone number By Name.  
Tip: You can also access the Find option from standby mode, by pressing the  
Contacts  
Contacts shortcut (Up Navigation) key.  
Up to 1000 entries can be stored in Contacts. Each entry can  
have up to five associated phone numbers and one E-Mail  
address. Each phone number can be up to 32 digits in length,  
including 2-Sec or Wait pauses (see “Manual Pause Calling” on  
page 22 for more information), and associated names can be up  
to 32 characters in length. You can assign the Speed Dial  
numbers of your choice for each entry. You can also mark your  
Contacts list as Restricted to prevent unauthorized viewing. (See  
“Restriction” on page 124 for more information).  
Add New Contact — Add a number or E-Mail address to your  
Contacts.  
Speed Dial — Assign a Contacts entry to a Speed Dial number.  
(See “Speed Dial” on page 48 for more information.)  
Group — Review, send messages to, add Contacts to, or rename  
four out of your five groups. (See “Contacts Groups” on page 49  
for more information.)  
Memory Info — Display used and available memory for Contacts  
entries.  
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch  
Dialing allow you to call numbers stored in Contacts faster.  
Tip: To launch the Contacts menu using a voice command — In standby  
mode, press and hold  
until the phone prompts, “Say a  
command.” Say “Go to Contacts” into the microphone.  
2. Select the desired option.  
39  
       
Tip: You can also press the keypad number key that corresponds to the  
Tip: You can select another number assigned to the name by using the Left/  
menu option number.  
Right navigation keys.  
To add or change information for this entry, press the Edit soft key.  
To show information about the entry., press VIEW  
Finding a Contacts Entry  
Contacts Soft Key Method  
(
)
For more options, press the Options soft key and the following  
options pop-up in the display:  
If you’ve stored a name entry in Contacts, Find allows you to find  
it quickly.  
New Contact — Add a new entry to Contacts.  
1. In standby mode, press the Contacts soft key.  
Erase — Erase the name and associated information.  
The Find screen appears in the display with the Go To field  
Send Txt Msg — Create and send a text message to the selected  
Contact.  
and the first Contacts entry highlighted.  
Send Pic Msg — Create and send a picture message to the selected  
Contact.  
Tip: You can also access the Find screen by pressing the Menu soft key, then  
selecting Contacts Find.  
Send Video Msg — Create and send a video message to the selected  
Contact.  
2. Enter a name as entered in Contacts. For example, if you  
Call — Dial the number associated with the name.  
saved the name as “Amy Smith”, begin the search by  
Send Name Card Via Bluetooth — Send a copy of a Contacts entry  
to another Bluetooth device.  
pressing  
or (for A”).  
Select an option. The selected option’s sub-menu appears in the  
display.  
As you enter letters, the names of the closest matches  
appear in the display.  
Voice Method  
3. When the desired entry is listed in the display, highlight the  
Use the Voice SVC Lookup command to view contact information  
for any named contact stored in your Contacts list by saying the  
name.  
entry.  
To dial the default number associated with the name, press  
.
Understanding Your Contacts  
40  
     
To say the name again, press the Repeat soft key.  
To exit VoiceSignal without dialing, press  
Note: The Lookup command shows the requested contact information in the  
.
display but does not dial any phone numbers for the contact.  
5. The contact information for the name you selected appears  
To look up information for a specific contact:  
in the display.  
1. In standby mode, press and hold  
to launch Voice  
To dial the number associated with the name, press  
To erase this entry from your Contacts list, press the Erase soft key.  
To add or change information for this entry, press EDIT ).  
.
SVC.  
Say a Command” appears in the display and is  
(
pronounced through the speaker.  
For more options, press the Options soft key and the following  
options pop-up in the display:  
2. Say “Lookup”.  
Send Txt Msg  
Voice SVC prompts you to “Say the name.”  
Send Pic Msg  
3. Speak clearly and say the full name of the person you want  
Send Video Msg  
Call  
to call, exactly as it is entered in your Contacts list.  
Send Name Card Via Bluetooth  
If VoiceSignal recognizes the name you said, the contact  
information for that name appears in the display.  
Quick Search Method  
If VoiceSignal does not recognize the name you said, a choice list of  
up to three names appears in the display, and VoiceSignal prompts  
you with “Did you say?” followed by the first name on the list.  
With Quick Search set to On, you can quickly access a Contact by  
doing the following:  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
information.)  
1. In standby mode, press the first few numeric keys that  
correspond to the letters of the contact’s name.  
41  
For example, to search for “Sally” you would enter  
3. Select Create New. The Create New screen appears in the  
display showing the following icons:  
Mobile  
Home  
Work  
Pager  
Fax  
S
A
L
2. Press the Navigation key Up. The Contacts Find screen  
appears in the display with the first matching contact  
name in a list highlighted.  
3. Highlight the desired Contact and press  
to call the  
contact.  
Adding a New Contacts Entry  
You can use either of two methods to add an entirely new entry to  
Contacts.  
4. Select the number type that matches your new entry.  
5. Use the keypad to enter a name to associate with the  
Dial Method  
Contacts entry.  
1. Using the keypad, enter the number you wish to add to  
6. Press  
or  
to save the new entry.  
your Contacts.  
Menu Method  
1. From the Contacts menu, select Add New Contact.  
2. Press the Save soft key.  
The following options appear in the display:  
The Add New Entry screen appears in the display with the  
Create New — Lets you create a new Contacts entry.  
Name field highlighted.  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
Understanding Your Contacts  
42  
           
2. Enter the name of the new entry using either keypad. (See  
2. Highlight the entry and press VIEW  
(
or  
). The View  
Contact screen appears in the display showing the  
highlighted entry’s information.  
3. Highlight one of the following fields:  
3. Use the Up/Down navigation keys to review the information  
Mobile  
Home  
Work  
for the entry that you wish to change, then press EDIT (  
or  
). The Edit Contact screen appears in the display.  
Pager  
E-Mail  
Group  
Ringtone  
Fax  
4. Highlight the particular information you want to add or  
change.  
To backspace and delete numbers or letters, press  
To clear all numbers or letters in the highlighted field, press and  
hold or  
or  
.
.
4. Enter a phone number or E-Mail address in the highlighted  
For more options, press the Options soft key and the following  
options pop-up in the display:  
field.  
Set Speed Dial Remove speed dial — Assign/remove a speed dial  
number (see “Speed Dial” on page 48 for more information).  
/
5. Repeat steps 3 and 4 as needed.  
Set as default — Set the number the phone will dial when Contacts  
6. Press  
or  
to save the new entry.  
dialing, speed dialing, or voice dialing.  
Editing a Contacts Entry  
Editing Contacts Name and Numbers  
1. Find the Contacts entry you wish to change. See “Finding a  
Wait — A hard pause (waits for input from you).  
2-Sec Pause — A 2-second pause after which dialing resumes (see  
information).  
Select the desired option.  
43  
       
5. When you’re finished changing the contents of a field,  
press or . Your changes are saved and a  
2. Select and edit the desired number. (See “Editing a  
confirmation message appears in the display.  
3. Press the Options soft key. The following pause options  
Add Pauses to Contacts Numbers  
appear in the display:  
Wait — A hard pause (waits for input from you).  
Calls to automated systems such as banking services often  
require a password or account number. Instead of manually  
entering these numbers, you can store them in a Contacts entry  
with the phone number and with special characters called  
pauses, up to a maximum of 32 digits.  
2-Sec Pause — A 2-second pause after which dialing resumes.  
4. Select the desired pause to add it to the number sequence.  
5. When you’re finished entering information, press  
or  
to store the number to Contacts.  
Wait — Stops the calling sequence until the phone receives further  
input.  
Pause Dial from Contacts  
2-Sec Pause — Stops the calling sequence for two seconds, then  
sends the remaining digits.  
1. If you stored the number using 2-second pause(s), simply  
recall the number from Contacts.  
Note: You can enter multiple Waits to extend the length of a pause. For  
example, two consecutive Waits cause a total pause time of four  
seconds. Keep in mind that pauses count as digits towards the 32-digit  
maximum.  
2. If you stored the number using Wait(s), recall the number  
from Contacts and wait for the appropriate prompt from  
the dialed number.  
To add pauses to a Contacts entry number, do the following:  
1. Find the Contacts entry associated with the number you  
want to include one or more pauses. (See “Finding a  
3. Press  
to dial the number.  
Edit an Existing E-mail Address  
1. Find the Contacts entry you want to edit. (See “Finding a  
Understanding Your Contacts  
44  
           
2. Highlight the desired Contacts entry, then press the Edit  
3. Highlight the picture that you wish to assign to the  
soft key.  
Contacts entry.  
The Edit Contact screen appears in the display.  
4. Press the Options soft key, then select Set As  
Picture ID.  
The SET AS PICTURE ID screen appears in the display.  
3. Highlight the E-Mail field.  
5. Find the Contacts entry you want to edit. (For more  
4. Use either keypad to edit the E-Mail address. (See  
5. Press  
or  
to save your changes.  
6. Highlight the desired Contact, then press  
or  
.
Assigning a Picture to a Contacts Entry  
Image set as picture ID.” appears in the display and your  
When you assign a picture to a Contacts entry, the picture you  
assign appears in the display when you receive a call from that  
Contact.  
are returned to the photo gallery screen.  
Assigning a Ringtone to a Contacts Entry  
1. Download a picture or, using your phone’s Camera with the  
Resolution set to 176x144, take and save a picture that you  
wish to assign as the picture ID for a Contact. (For more  
When you assign a ringtone to a Contacts entry, the phone plays  
the ringtone that you assign when you receive a call from that  
Contact instead of the Voice Calls ringtone.  
1. Find the Contacts entry you want to edit. See “Finding a  
2. Highlight the desired Contact, then press the Edit soft key.  
2. From Standby mode, press the Menu soft key, then select  
The Edit Contact screen appears in the display.  
Multimedia  
My Images. A photo gallery screen appears  
in the display, showing a series of thumbnail photos.  
45  
 
3. Highlight the Ringtone field, then press the Set soft key.  
The Contact Tone menu showing the following options  
appears in the display:  
1. Press  
to end your call. The call time, length of call,  
phone number, and name of the party (if available) appear  
in the display.  
My Ringtones  
My Sounds  
2. Press the Save soft key. The Save screen appears in the  
display showing the following options:  
4. Select the desired option. The My Ringtones file list or the  
Create New — Lets you create a new Contacts entry.  
My Sounds file list appears in the display.  
Update Existing — Lets you add the number you entered to an  
existing Contacts entry.  
5. Select the ringtone or sound that you wish to assign to the  
Contacts entry. The Contacts entry screen appears in the  
display with the name of the selected file in the Ringtone  
field.  
3. Select the desired option, then follow the instructions in  
the upcoming sub-sections depending on whether the  
number is a new entry or you are adding it to an existing  
entry.  
6. Press  
or  
to save the ringer assignment to the  
Create a New Entry  
selected Contacts entry.  
1. From the Save screen, select Create New. The Create  
New screen appears in the display showing the following  
number type options:  
Saving a Number After a Call  
Once you finish a call, you can store the caller’s number to your  
Contacts list.  
Mobile  
Home  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
Understanding Your Contacts  
46  
       
The following number type options appear in the display:  
Work  
Mobile  
Home  
Work  
Pager  
Fax  
Pager  
Fax  
2. Select the number type that matches your new entry.  
3. Enter a name for the new entry. (See “Entering Text” on  
4. Press  
or  
to save the new entry to your Contacts  
list.  
Note: Number types that are already assigned a number show the number  
Add to an Existing Entry  
instead of the number type label.  
1. From the Save screen, select Update Existing. The  
Update Existing screen appears in the display showing  
your Contacts list with the Go To field and the first  
Contacts entry highlighted.  
3. Select the desired unassigned number type. The Contacts  
entry information appears in the display with the new  
number posted in the appropriate number type field.  
4. Press  
or  
to save your changes to the existing  
2. Find and select the Contacts entry to which you want to  
entry.  
47  
   
3. Press the Options soft key, then select Set Speed Dial. The  
Speed Dial  
Speed Dial screen appears in the display.  
A Contacts entry’s Speed Dial number corresponds to the number  
keys you press to speed dial one of that entry’s numbers. For  
example:  
4. Highlight an Unassigned Speed Dial number or enter an  
Unassigned Speed Dial number in the Go To field using  
either keypad.  
To speed dial the Contacts entry assigned to Location 5, press and hold  
or , (1-touch dialing).  
To speed dial the Contacts entry assigned to Location 35, press  
or then press and hold or , (2-touch dialing).  
To speed dial the Contacts entry assigned to Location 235, press  
or , press or , then press and hold hold or  
, (3-touch dialing).  
Important!: Do not enter Speed Dial numbers 1, 311, 411, 611 or 911. These  
numbers are already assigned to Voicemail (001), municipal  
services (311), Directory Assistance (411), account information  
(611), and emergency use (911).  
5. Press SET ( or  
). You are prompted to confirm your  
Speed Dial number assignment.  
You can assign one or more Speed Dial numbers to a Contacts  
entry during new entry creation or by editing an existing entry.  
6. Press the Yes soft key to save your Speed Dial assignment  
Assignment During Entry Creation  
and return to the Add New Entry screen.  
To assign a Speed Call number to a new Contacts entry number,  
do the following:  
Press the No soft key to discard the assignment and return  
to the Speed Dial screen.  
1. Follow either of the New Contacts entry procedures (see  
a name for the entry.  
7. Press  
or  
to save your changes.  
Changing a Speed Dial Location  
1. Find the Contacts entry you want to edit. See “Finding a  
2. After entering the Contacts entry name, do not press  
or  
. Instead, highlight the number field to be assigned  
2. Highlight the desired entry, then press the Edit soft key.  
a Speed Dial number.  
Understanding Your Contacts  
48  
     
3. Highlight the number field marked by the Speed Dial icon  
).  
1. Create a Contacts entry (see “Adding a New Contacts  
Entry” on page 42 for more information) that you want to  
add to a Group.  
(
4. Press the Options soft key, then select Remove speed dial  
Remove speed dial?” prompts you to confirm your  
desire to remove the entry.  
.
– Or –  
Find the Contacts entry you want to edit. See “Finding a  
5. Press the Yes soft key to remove the Speed Dial  
assignment. “Speed Dial Removed” pops up in the  
display, and you are returned to the Edit Contact screen.  
2. Highlight the Group field, then press the Set soft key.  
The Select Group screen appears in the display showing  
Groups similar to the following:  
6. Do steps 2 through 7 of the “Assignment During Entry  
No Group  
Business  
Colleague  
Family  
Contacts Groups  
Contact Groups let you easily send messages to multiple,  
selected Contacts. You can also use Groups to find Contact  
entries and to add/remove Contacts names in a Group or to  
create or rename a Group.  
Friends  
3. Select the Group to which you want to assign the selected  
Add Contacts Entry to a Group  
Contact.  
Using Add New/Edit Contact Option  
You are returned to the Add New Entry/Edit Contact  
screen and the selected Group name populates the Group  
field.  
To add a Contact to a Group using either the Add New Contact  
option or the Edit Contact option, do the following:  
4. Press  
or  
to save your changes.  
49  
   
Using Group Add Option  
4. Do one of the following:  
Highlight a Contacts entry you want to add to the group, then press  
MARK or ). A checkmark appears in the entry’s  
checkbox.  
The Add option lets you add one or more existing Contacts to a  
Group.  
(
1. From the Contacts menu, select Group.  
Repeat as needed to check all the desired Contacts.  
Press the Options soft key, then select Mark All or Unmark All  
The Group List screen appears in the display showing  
.
Groups similar to the following:  
Note: To unmark a marked Contact, highlight the Contact and press MARK  
or ) to clear the checkmark.  
No Group  
Business  
Colleague  
Family  
(
5. When you have marked the Contacts you want to add to  
the group, press the Done soft key. “Contact added to  
group” appears in the display, followed by the selected  
Group list including the added Contacts.  
Friends  
2. Highlight a Group, then press the Options soft key. The  
following options pop-up in the display:  
Rename a Group  
Send Txt Msg  
Send Pic Msg  
Send Video Msg  
Rename  
The Rename option lets you change the name any of the Groups,  
except No Group.  
1. From the Contacts menu, select Group. The Group List  
screen appears in the display.  
Erase  
2. Highlight a Group name (other than No Group) that you  
Add  
wish to change, then press the Options soft key.  
3. Select Add. The Add Contacts screen appears in the  
3. Select Rename.  
display showing a list of Contacts entries.  
Understanding Your Contacts  
50  
The Rename Group screen appears in the display.  
Erase a Group  
The Erase option lets you delete a Group, thus freeing you to  
4. Enter changes to the group name using either keypad.  
reassign the Contacts formerly in the Group.  
1. From the Contacts menu, select Group. The Group List  
5. When you have completed your changes to the Group  
screen appears in the display.  
name, press SAVE ( or  
).  
2. Highlight the Group you wish to delete, then press the  
Group Renamed” appears in the display followed by the  
Options soft key, and select Erase.  
Group List screen showing your renamed Group.  
You are prompted to confirm the Group erasure.  
Add a New Group  
3. Press the Yes soft key to confirm erasure of the highlighted  
The New option lets you add Groups.  
Group. Press the No soft key to retain the Group.  
1. From the Contacts menu, select Group. The Group List  
screen appears in the display.  
Note: When you delete a Group, the assigned Contacts entries return to No  
Group  
.
2. Press the New soft key. The New Group screen appears in  
the display.  
Deleting a Contacts Entry  
1. Find the Contacts entry you want to delete. (See “Finding a  
3. Enter a new group name using either keypad. (See  
4. Press SAVE ( or  
). “Group Saved” appears in the  
2. Highlight the desired entry, then press the Options soft  
key, and select Erase. The phone prompts you to confirm  
the erasure.  
display followed by the Group List screen showing your  
new Group.  
51  
   
3. Press the Yes soft key to confirm erasure of the selected  
Contact. Press the No soft key to retain the Contact.  
Memory Info  
The Memory Info menu option lets you view the amount of  
memory you have used to store Contacts entries, as well as the  
memory remaining to store more Contacts entries.  
From the Contacts menu, select Memory Info.  
The Memory Info Contacts screen appears in the display  
showing the amount of memory Used and remaining (Free)  
for Contacts entries.  
Understanding Your Contacts  
52  
   
Section 7: Games & Apps  
With Games & Apps, you can download full featured applications  
over the air including games, personalized ring tones, pictures,  
and more. You can send and receive instant messages and E-  
Mail, or browse the web to catch up on all the latest news.  
Applications Shopping and Downloading  
Download games, ring tones, E-Mail, and more using the Games  
& Apps. For information on airtime charges, contact your  
Wireless Carrier.  
This section outlines how to obtain games and other applications  
for your phone. For more information, contact your Wireless  
Carrier.  
1. At the Games & Apps screen, select Games & Apps. The  
Games & Apps catalog menu appears in the display.  
2. Follow the instructions in your phone’s display.  
Accessing Games & Apps (Mobile Shop)  
Note: Please check with your Wireless Carrier for availability of applications.  
Note: The Games & Apps screen displays in both portrait and landscape  
formats.  
Tip: To simplify any text entries in Games & Apps screens, try using the  
1. In standby mode, do  
one of the following to  
launch Games & Apps:  
QWERTY keypad.  
Press the Right  
navigation key or  
.
Press  
Games & Apps  
Games & Apps  
, then select  
.
The Games & Apps screen appears in the display as  
shown.  
53  
     
Section 8: Messages  
This section explains how to send or receive different types of  
messages. This section also describes the features and  
functionality associated with messaging.  
The Messages menu appears in the display.  
Create and Send Text Messages  
1. From the Messages menu, select Send Message Text  
Message. The Create Txt Msg screen appears in the  
display showing the To: list.  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
Tip: To launch the Create Txt Msg screen using a voice command — In  
Types of Messages  
Your phone is able to send and receive Text, Picture, and Video  
messages to compatible phones and devices. Text messages can  
be up to 160 characters in length.  
standby mode, press and hold  
or  
until the phone prompts,  
Say a command.” Say “Send Text” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
2. Enter the phone number or E-Mail address of the recipient,  
Note: Available memory is shared between all messages. You can store up to  
100 messages. However, the exact number is dependent upon  
message length.  
then press  
or  
. The Text: appears in the display.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the To: list.  
,
Launching Messages  
To launch Messages:  
3. Enter the text content of your message using either  
information.)  
1. In standby mode, press the Messages shortcut (Up  
navigation) key.  
– or –  
4. At any point while composing a message:  
Press the Menu soft key, then select Messages.  
Messages  
54  
               
To change the text entry mode, press the Left soft key and select  
the desired text entry mode, repeatedly press and hold , or  
View Now — Opens the message, where you have the option to  
Forward, Reply With Copy, Save As Preset, Lock, Add To Contacts,  
Message Info, or Extract.  
press  
View Later — Saves the message to your inbox, where you can view  
it later, then returns your phone to standby mode.  
To complete the message text and set message send options,  
press the Options soft key. The following options appear in the  
display:  
Select the option of your choice.  
Preset Msgs — Insert pre-composed text in your message.  
Receive Messages While in a Call  
Save As Draft — Save the message to your Drafts folder.  
When you receive a message while in a call, New Message  
appears in the display along with the closed envelope icon ( ).  
The date and time of the message also appear in the display  
along with the following options:  
Save As Preset — Save the message text to the Add Preset Msg  
list.  
Add To Contacts — Save the recipient’s number or E-Mail address to  
the Contacts list.  
View Now — Opens the message, where you have the option to  
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,  
Message Info, or Extract.  
Delivery — Choose the Enh. Delivery Ack (On/Off), Priority (Urgent/  
Normal), CB# (On/Off), or Signature (On/Off).  
Cancel Msg — Discard this message. You are prompted to save it to  
your Drafts folder.  
View Later — Saves the message to your inbox, where you can view  
it later, and returns your phone to call mode.  
5. Once you’re finished entering your message, press SEND  
or ).  
Select the option of your choice.  
(
Chat View  
Receive Text Messages  
Chat View mode is the default format for viewing text messages.  
In Chat View mode, you can view a series of text messages  
exchanged between your phone and another phone as if the  
messages were a chat session, instead of viewing only the  
incoming messages individually.  
When you receive a message in standby mode, the ringer sounds  
(unless turned off) and New Message appears in the display  
along with the closed envelope icon ( ). The date and time of  
the message also appear in the display along with the following  
options:  
55  
         
Note: To disable/enable Chat View mode, change the Message View setting.  
Tip: To launch the Create Pic Msg screen using a voice command — In  
standby mode, press and hold or until the phone prompts,  
Say a command.” Say “Send Picture” into the microphone. You are then  
prompted to say a Contact name or a number for the first recipient of the  
message.  
Tip: To simplify the exchange of messages with Message View setting to  
Chat, you might want to change the Auto Save setting to Auto Save  
.
2. Enter the phone number or E-Mail address of the recipient  
Send Picture/Video Messages  
using the keypad, then press  
or  
.
Send Picture/Video messages to recipients with a compatible  
phone or other device, and accompany a Picture message with a  
voice memo, ringtone, or downloaded melody.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the To: list.  
,
3. The Subject: field appears in the display. Enter a subject  
Text” on page 35 for more information.)  
Tip: You can also send Picture/Video messages while in Camera/Camcorder  
You can send a Picture/Video message to up to ten recipients. Enter  
each recipient’s address or phone number in a separate Send To field of  
the Picture message composer.  
4. Highlight the Text: field, then enter the message text using  
information.)  
1. From the Messages menu, select Send Message ➔  
Picture Message / Video Message. The Create Pic Msg /  
Create Video Msg screen appears in the display with the  
Send To tab highlighted and showing the To: list.  
5. For a Picture Message, highlight the PIC: field, then press  
the Pictures soft key. A photo gallery of thumbnail images  
appears in the display.  
– or –  
Messages  
56  
   
For a Video Message, highlight the Video: field, then press  
the Videos soft key. A video gallery of thumbnail images  
appears in the display.  
Note: You can record and insert a voice memo of up to 60 seconds in length,  
if you record first before attaching a picture. If a picture is attached  
before recording, the size of the voice memo is limited to the amount  
of remaining memory.  
6. Select a picture/video to add it to your message.  
Press or  
sound.  
to exit the My Sounds screen without selecting a  
To expand the highlighted picture/video for easier viewing,  
press the View  
7. Press or  
/
Play soft key.  
10. Press the Options soft key to complete the message text  
and set message send options. The following options  
appear in the display:  
to exit the Pictures/Videos gallery screen  
without selecting a picture.  
Preview — View the picture/video as the recipient will see it.  
Add Preset Msg — Add precomposed text to your message.  
Save As Draft — Save the message to your Drafts folder.  
You are returned to the Create Pic Msg / Create Video  
Msg screen with the selected picture in the PIC: field or  
video in the Video: field.  
Priority Level — Choose Urgent or Normal  
.
8. For a Picture Message, if you wish to insert a sound into  
your message, highlight the Sound: field, then press the  
Sounds soft key. The My Sounds screen appears in the  
display.  
Validity Period — Enter the Date when this message will cease  
to be valid, then use the Left and Right navigation keys to choose  
the Time  
.
Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
9. Do one of the following:  
Remove Pic — Remove the picture from your message.  
Remove Video — Remove the video from your message.  
Remove Sound — Remove the sound file from your message.  
Select a file from the list of previously recorded voice memos and  
preloaded audio files on your phone.  
Select Record New and record a new voice memo, then select the  
new recorded sound file to add it to the message.  
Add To Contacts — Save the recipient’s number or E-Mail  
address as a Contacts list entry.  
57  
Select the desired option and setting.  
11. Press SEND or ) to send the message. “Pic Msg  
3. Once a Picture/Video message has been downloaded to  
your phone, the new Picture/Video message appears in the  
display. If the message includes a sound file, the phone  
begins playing it.  
(
Sending” appears in the display and a progress bar  
indicates the send status.  
Receive Picture/Video Messages  
Note: For more information on viewing and managing received picture  
When you receive a Picture/Video Message in standby mode, the  
ringer sounds (unless turned off) and New Message appears in  
the display along with the closed envelope icon ( ). The date  
and time of the message also appear in the display along with  
the following options:  
View a Picture Message Now  
1. After you select the View Now option, “Connecting”  
appears in the display followed by “Retrieving” and a  
progress bar indicating that the message is downloading  
to your phone.  
View Now — Retrieves and opens the message, where you have the  
option to Reply, Forward, Delete, Save Text, Save Pic, Save Video, or  
Save Msg.  
2. After the Picture/Video message has downloaded, an alert  
sounds, and the new Picture/Video message appears in  
the display. If the message includes a sound file, the phone  
begins playing it.  
View Later — Saves the message to your inbox, where you can view  
it later, then returns your phone to standby mode.  
Select the desired option.  
View a Picture/Video Message Later  
1. From the Messages menu, select Inbox. The Inbox appears  
in the display.  
3. While viewing your message press the Options soft key.  
The following options appear in the display:  
Replay — Play the video or sound file included in the video/picture  
2. Select the new message. “Connecting” appears in the  
display followed by “Retrieving” and a progress bar  
indicating that the message is downloading to your phone.  
message again.  
Forward — Send a copy of this message to another recipient.  
Messages  
58  
       
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
Inbox  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Save Sound — Save the sound file included in this message to  
the My Sounds folder.  
1. From the Messages menu, select Inbox. The Inbox appears  
in the display showing a list of received messages.  
Save Pic — Save the picture included in this message to the My  
Images folder.  
Tip: While in a call, press the Options soft key, then select Messages  
.
Save Video — Save the video included in this message to the My  
Videos folder.  
2. Highlight the message you wish to view, then press OPEN  
or ) to view contents of the highlighted message.  
Save Quick Text — Save the text in this message as a new Quick  
Text.  
(
3. While viewing your message, press the Options soft key.  
Lock Unlock — Block/permit erasure of the highlighted  
/
message.  
The following options appear in the display:  
Add To Contacts — Save the sender’s number to your Contacts.  
Forward — Send a copy of this message to another recipient.  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the  
original message.  
4. Select an option to perform its function.  
Save Sound — Picture Messages Only — Save the audio file  
Note: For more information on received picture message options, see  
(sound) included in this message to the My Sounds folder.  
Save Pic — Picture Messages Only — Save the picture included  
in this message to the My Images folder.  
Message Boxes  
Your phone stores messages in any one of five message boxes.  
The subsections that follow describe each message box in detail.  
• Save Video — Video Messages Only — Save the picture included  
in this message to the My Videos folder.  
• Save As Preset — Save the text in this message as a new Quick  
Text.  
59  
       
Reply — Compose and send a reply message to the originator of the  
received message.  
Lock Unlock — Block/permit erasure of the highlighted  
/
message.  
Reply With Copy — Compose and send a reply message to the  
originator of the received message and include a copy of the original  
message.  
Add To Contacts — Save the sender’s number to your Contacts.  
Message Info — Shows message delivery status, addressee,  
size, and so on.  
Forward — Send a copy of this message to another recipient.  
Extract — Calls the sender of the received message.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
4. Select an option to perform its function.  
Add To Contacts — Save the sender’s number to your Contacts.  
Messages and Lock Mode  
Erase Inbox — Delete all unlocked messages from the Inbox.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message appear in the display, but you  
cannot access the message until you enter the lock code.  
Select an option to perform its function.  
Outbox  
Managing Inbox Messages  
Your phone stores messages in the Outbox, regardless of  
whether the message was successfully transmitted. Verify if and  
when a message or E-Mail was successfully received by enabling  
the Enh. Delivery Ack/Delivery Ack feature.  
1. From the Messages menu, select Inbox. The Inbox appears  
in the display showing a list of received messages.  
2. Highlight a message in the list, you have the following  
options:  
Review Messages in the Outbox  
To remove the highlighted message from the Inbox, press theErase  
1. From the Messages menu, select Outbox. Your list of sent  
messages appear in the display.  
soft key.  
To review the highlighted message, press OPEN  
(
or  
).  
2. Highlight a message in the list, you have the following  
For more options, press the Options soft key. The following options  
appear in the display:  
options:  
Messages  
60  
               
To remove the highlighted message from the Inbox, press the Erase  
soft key.  
To remove the highlighted message from the Inbox, press the Erase  
soft key.  
To review the highlighted message, press OPEN  
(
or  
).  
To review the highlighted message, press OPEN  
(
or  
).  
For more options, press the Options soft key. The following options  
appear in the display:  
For more options, press the Options soft key. The following options  
appear in the display:  
Play Again — Replay the sound file in a Picture message or the video  
in a Video message.  
Forward — Send the highlighted message to another recipient.  
Resend — Send another copy of the highlighted message to the  
Forward — Send the highlighted message to another recipient.  
original recipient  
Erase — Delete this message from the Outbox, if the message is  
Unlocked.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Add To Contacts — Save the recipient’s number to your Contacts.  
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Erase Outbox — Erase all Unlocked messages from the Outbox.  
Save As Preset — Save the message text as Quick Text for insertion  
into other messages.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Add To Contacts — Save the recipient’s number to your Contacts.  
Select an option to perform its function.  
Message Info — Shows message delivery status, addressee, size,  
and so on.  
Drafts Box  
Messages in the Drafts box are those that have been composed  
but never sent. You can return to the Drafts box at any time to  
view, edit, or send a draft message.  
Extract — Calls the originator of the message.  
Select an option to perform its function.  
Managing Outbox Messages  
Create a Draft Message  
1. From the Messages menu, select Outbox. Your list of sent  
messages appear in the display.  
1. From the Messages menu, select Send Message and then  
select one of the following Send Message options:  
2. Highlight a message in the list, you have the following  
Text Message  
options:  
Picture Message  
61  
       
Video Message  
3. Enter or change the recipient’s number and/or E-Mail  
address and the message text using the keypad. (See  
“Entering Text” on page 35 for more information.)  
The Create Txt Msg / Create Pic Msg / Create Video Msg  
screen appears in the display showing the To: list.  
2. Enter the phone Number or E-Mail address of a recipient,  
4. To complete the message text and set message send  
options, press the Options soft key. The following options  
appear in the display:  
then press the  
key.  
Tip: Press the Add soft key to display a pop-up menu containing: Contacts  
Groups, and Recent Calls. These options allow you to find and add  
recipients to the Send To: list.  
,
• Preset Msgs — Insert pre-composed text in your message.  
• Save As Draft — Save the message to your Drafts folder.  
• Save As Preset — Save the message text to the Add Preset Msg  
3. Compose your message using either keypad, press the  
list.  
Options soft key, then select Save As Draft. “Message  
• Add To Contacts — Save the recipient’s number or E-Mail address  
to the Contacts list.  
saved in drafts” appears in the display and your message  
is saved to the Drafts box.  
• Delivery — Choose the Enh. Delivery Ack (On/Off), Priority  
(Urgent/Normal), CB# (On/Off), or Signature (On/Off).  
View and Edit Draft Text Messages  
• Cancel Msg — Discard this message. You are prompted to save it  
1. From the Messages menu, select Drafts. A list of any draft  
messages that you’ve saved appears in the display.  
to your Drafts folder.  
5. Select an option to perform its function.  
2. Highlight a text message that you wish to view or edit, then  
6. When you have completed composing your message,  
press EDIT  
(
or  
). The Create Txt Msg screen appears  
press SEND  
(
or  
) to send it.  
in the display.  
View and Edit Draft Pic. / Video Messages  
1. From the Messages menu, select Drafts. A list of any draft  
messages that you’ve saved appears in the display.  
Messages  
62  
2. Highlight the picture/videomessage that you wish to view,  
then press EDIT key ( or ). The Create Pic Msg  
Create Video Msg screen appears in the display.  
5. When you have completed composing your message,  
press SEND or ) to send it.  
/
(
Managing Draft Messages  
3. Make any needed changes and press the Options soft key.  
1. From the Messages menu, select Drafts. A list of any draft  
The following options appear in the display:  
messages that you’ve composed appears in the display.  
Preview — Shows the message contents.  
2. Highlight a message, then do one of the following:  
• Add Preset Msg — Insert pre-composed text into your message  
text.  
To remove the highlighted message from the Drafts box, press the  
Erase soft key.  
Save As Draft — Saves the changed message to the Draft Box.  
Priority Level — Choose Urgent or Normal  
To access other options, press the Options soft key. The following  
options appear in the display:  
.
Send — Send the highlighted message to the number or E-Mail  
Validity Period — Enter the Date when this message will cease  
to be valid, then use the Left and Right navigation keys to choose  
address currently included with the message.  
the Time  
.
Lock Unlock — Block/permit erasure of the highlighted message.  
/
Delivery Ack — Choose On or Off — Requests confirmation  
when your message is received.  
Add To Contacts — Save the recipient’s number and/or E-Mail  
address to your Contacts.  
Save As Preset — Save the message text as Quick Text for insertion  
into other messages.  
Remove Pic — Remove image included in draft message.  
Remove Video — Remove video included in draft message.  
Remove Sound — Remove sound file included in draft message.  
Erase Drafts — Delete all unlocked draft messages.  
Select an option to perform its function.  
Add To Contacts — Save the recipient’s number or E-Mail  
address to your Contacts.  
Voicemail  
Messages in your voice mailbox are logged in the Voicemail box  
of the Messages menu. Open the Voicemail box to view the  
details of the Voicemail message.  
4. Select an option to perform its function.  
63  
       
When you’re notified of a new voicemail message by an alert  
tone and the new message icon, the following options pop:  
2. Follow the voice prompts to access your voicemail  
messages.  
Listen Now — Calls your voice mailbox and lets you listen to your  
messages.  
Erase Messages  
You can erase all of the messages in any or all of message boxes  
using one convenient sub-menu.  
Listen Later — Returns you to standby mode where you can choose  
to call your mailbox and review your messages at a later time.  
Listen to Voicemail Now  
Note: This function erases all messages in the selected message box. To  
delete a single message, go to the respective message box, highlight  
the message, and press the Erase soft key. (For more information, refer  
1. In standby mode, select Listen Now in the New Voicemail  
pop-up. Your phone automatically calls your voice mailbox.  
2. Follow the voice prompts to access your voicemail  
1. From the Messages menu, select Erase Messages. The  
messages.  
following options appear in the display:  
Listen to Voicemail Later  
Inbox — Deletes all unlocked messages stored in the Inbox.  
Outbox — Deletes all unlocked messages stored in the Outbox.  
Drafts — Deletes all unlocked messages stored in the Drafts box.  
If you have chosen to review your voicemail messages at a later  
time:  
1. From the Messages menu, select Voicemail. The Voicemail  
screen appears in the display, showing the number of new  
voicemail messages received and the date and time the  
latest message was received.  
All Messages — Deletes all unlocked messages stored in all of  
the message boxes, except Voicemail.  
2. Select the message box containing the messages you  
want to delete. You’re prompted to confirm the erasure of  
all messages in the selected box or in all boxes.  
Tip: You can also access your voicemail from standby mode, by pressing and  
holdolding  
or  
to speed call your voice mailbox.  
3. To delete the messages, press the Yes soft key. To cancel  
deleting the messages, press the No soft key.  
Messages  
64  
     
Auto Scroll — With Auto Scroll On, the full content of a text  
message automatically rolls upward on the display, one screen-full  
at a time.  
Message Settings  
Use the Msg Settings sub-menus to define settings for general,  
text, and picture messages.  
• Messaging Font Size — Choose whether message text will  
1. From the Messages menu, select Msg Settings. The  
appear using Large or Normal font size.  
following options appear in the display.  
• Message View — Chat/Normal — With Message View set to  
Chat, multiple text messages exchanged with a single addressee  
appear as a chat session.  
Notification — Choose how your phone notifies you of incoming  
messages (Msg. & Icon Icon Only).  
2. Select the desired option, then select the desired setting or  
Auto Save — Choose whether your messages are saved  
automatically when you exit them (Auto Save Do not Save,  
,
enter the desired value.  
Prompt).  
Editing and Entering Preset Messages  
Auto Erase  
Choose to receive (On) or not receive (Off) a  
1. From the Messages menu, select Msg Settings Preset  
Msgs. The Preset Msgs sub-menu appears in the display.  
warning message when you delete a message.  
Auto View — On/Off — With Auto View On, the full content of a  
text message appears in the display as the messages is received.  
2. Select a Preset Msg you want to change.  
Entry Mode — Choose the default method for entering text into  
messages (T9word T9Word, T9WORD, abc, Abc, ABC, 123).  
,
Note: You cannot change the pre-defined Quick Text included with your  
phone.  
CB# — Choose whether to include a callback phone number with  
your outgoing messages, and enter the number to be included.  
3. To create a new Preset Msg, press the New soft key.  
VM# — Edit or view your Voicemail number.  
Signature — Create a signature and choose whether to include it  
at the end of outgoing message text.  
Tip: You can also create new Preset Msgs by viewing/editing an Outbox  
message and using the Save Quick Text option in the Options menu. See  
Preset Msgs — Edit your pre-composed messages, which can  
then be inserted into new messages.  
65  
     
4. Enter/change the text content of your Preset Msg using  
information.)  
3. If you have an account, enter your account ID and  
password.  
5. To save your finished Preset Msg, press  
or  
. The  
Preset Msgs menu appears in the display with your new  
Preset Msg highlighted.  
E-mail Messages  
Your r560 phone includes links to your  
Wireless Provider’s Mobile Web service  
that can let you access your personal  
E-mail account(s).  
Note: For more information about Mobile Web E-mail, contact your Wireless  
Provider.  
1. In Standby mode, select  
Weblinks (  
) Y! Mail  
/
Windows Live. The respective  
login screen appears in the  
display.  
2. To create an account, follow the on-screen prompts.  
Messages  
66  
 
Section 9: Widgets  
Widgets are special icons that you can use to launch particular  
phone features and functions or to quickly access particular  
Internet addresses. You can access the widgets on your U460  
phone by using the Widget Bar.  
3. To launch a function/feature/  
application linked with the  
highlighted widget, select an  
option in the widget’s pop-up  
window.  
Accessing Widgets  
The Widget Bar is an list of easily accessed widgets that acts like  
a menu.  
4. To exit a widget, select  
press  
or  
.
To access a Widget:  
Widget Pop-Up Controls  
1. In standby mode, using the  
Left and Right navigation keys  
to highlight a particular  
widget.  
One or more of the following controls appear in the upper right  
corner of widget pop-up menus:  
Closes the pop-up menu and highlights the Weather  
widget(  
).  
2. To view information about the  
Refreshes the contents of the pop-up menu.  
widget and/or to access  
widget options, press  
.
Launches another screen, such as a settings screen for  
the Weblinks widget (  
).  
Preview information or a menu  
of options for the highlighted widget pops-up.  
Tip: You can hide or display individual widgets by changing the Widget  
67  
     
4. To save your new settings, press  
. You are returned to  
Configure Widgets  
the Widget Bar.  
This option lets you select which  
widgets appear in the Widget Bar.  
Note: You cannot Change, Delete, or Move  
the Personalize  
(
), My Account  
( ) widgets.  
(
), or Storefront  
1. In standby mode, select the  
Personalize widget (  
),  
then select Personalize  
Widgets  
2. Select an Add Shortcut widget  
), then select Browse the  
.
(
widget catalog. Widget catalog  
options appear in the display.  
3. To enable/disable a particular  
widget, select the associated  
option in the widget catalog. A  
check mark appears in/  
disappears from the option’s  
check box.  
Widgets  
68  
 
Section 10: Browser  
This section outlines how to launch the Browser, how to navigate  
to pages on the web, and how the keys on the keypads are used  
with the Browser. Additionally, links to other sites are briefly  
discussed.  
Launching the Browser  
1. In standby mode, do one of the following to launch the  
Browser:  
Press the Navigation key Down or press  
shortcuts).  
(the Browser  
Note: Browser is usable in either portrait or landscape format (that is, with  
the QWERTY keypad open or closed).  
– or –  
Press the Menu soft key, then select Browser  
Using the Browser, you can conveniently surf the web and  
download ringtones, music, videos, and wallpapers using your  
phone. Each time you launch the Browser, your phone connects  
Go to Web.  
2. A list of categories (each representing one or more web  
sites) appears in the display.  
to the Internet and the service indicator icon (  
the display.  
) appears in  
3. Use the arrow keys to browse the categories.  
Stored Web Content  
4. Once the desired category is highlighted, press  
to  
enter the category list.  
The Browser ends an Internet connection after a certain period of  
inactivity, however some information from your session remains  
stored in the phone (if you leave your phone turned on). You can  
access this information without reconnecting to the Internet.  
However, if you are viewing stored information, and you select a  
link to a site that was not accessed in your last session, you  
automatically re-connect to the Internet.  
Exiting the Browser  
To exit the Browser, press  
.
Using the Browser  
When you use the Browser, some of the keys operate differently  
than during a normal phone call. The Browser presents on-  
screen items in any of the following ways:  
Text or numeric input.  
69  
               
Links (embedded in content).  
Numbered options (some may not be numbered).  
Simple text.  
SHIFT/* Key — Press before entering text to enable  
uppercase characters.  
Spacebar/# key — Press to insert a space when  
entering text.  
You can act upon options or links by using the soft keys.  
Number 1 thru 0 — Use the number keys to  
select items in a menu if they are numbered.  
Browser Soft Keys  
At the bottom of the Browser screen is a bar that contains  
browser commands. The Left and Right soft keys on either  
keypad are used to execute the commands that appear in their  
respective corners of the display. These are called “soft keys”  
because their functions change depending on the application.  
End Key — Press to exit the Browser and return your  
phone to standby mode.  
Left Soft Key — Press to activate the command that  
appears above it in the display.  
Using Links  
Right Soft Key — Press to activate the command  
that appears above it in the display.  
Links have several purposes, such as jumping to a different  
page, to a different site, or even initiating a phone call. Links are  
shown inside of brackets ([ ]). You can normally use the Left soft  
key to select a link when it is highlighted.  
How Browser Keys Work  
The following table lists Browser keys and their functions.  
Arrow/Navigation keys — Use to browse  
lists and options.  
Back Keys — Press once to back up one page. Press  
and hold to go back to home page.  
Press once to clear the last number, letter, or symbol  
entered. Press and hold to completely clear the entry.  
Browser  
70  
       
Section 11: Voice SVC  
This section explains how you can use and customize your  
phone’s Voice SVC voice recognition feature.  
Say a Command” appears in the display and plays through the  
earpiece, followed by a list of available commands.  
In standby mode, press the Menu soft key, then select VoiceSVC  
Voice SVC Options  
Voice Command.  
Your Samsung Messager II includes Nuance Vsuite, state-of-the-  
art voice recognition software that lets you use your voice to dial  
numbers, access your Contacts list, and open Tools. To access  
your phone’s voice recognition, do the following:  
Note: You can also set your phone to start VoiceSignal when you connect an  
optional headset to the phone. (For more information, see “Voice  
1. In standby mode, press the Menu soft key, then select  
The following voice commands appear in the display:  
VoiceSVC. The following options appear in the display:  
Call — Lets you dial the phone by saying any name stored in your  
Contacts list, without ever having to record, or “train” that name.  
VoiceSignal automatically voice-activates all your Contacts, even if you  
have hundreds of them stored on your phone. You can also dial any  
telephone number, even if it is not stored in your Contacts list, by  
saying the digits in the number. (See “Voice Dialing” on page 23 for  
more information.)  
Voice Commands — Lets you place calls, access your Contacts  
List, review your appointments, and more by speaking commands  
“Voice Method” on page 40 for more information.  
Voice Settings — Lets you tailor Vsuite to better respond to your  
voice and your phone use preferences. See “Digit Dialing” on  
page 73 for more information.  
Send Text — Lets you access Create Text Message.  
Send Picture — Lets you access Create Picture Message.  
Lookup — Lets you find a Contact by name and review the Contact’s  
information.  
2. Select the desired sub-menu.  
Voice Command  
To access the Voice Command menu, do one of the following:  
In standby mode, press and hold  
or  
.
71  
       
Go to — Lets you access the following list of your phone’s features  
and functions:  
Voice Settings  
To access the Voice Settings menu, do one of the following:  
Recent Calls  
Messages  
Contacts  
Multimedia  
Browser  
Games & Apps  
Tools & Utilities  
VoiceSVC  
In standby mode, press and hold  
Settings soft key.  
, then press the  
– or –  
In standby mode, press the Menu soft key, then select  
VoiceSVC Voice Settings.  
Choice Lists  
Settings  
When Vsuite cannot recognize a name or number, it displays a  
choice list of up to three possible choices, and prompts you to  
confirm the correct one.  
Check — Lets you say a single command (such as “Status”) to verify  
your phone's: Status Signal Coverage Battery, or My Phone #  
,
,
,
.
You can select how Vsuite will use choice lists with name dialing,  
digit dialing, and Contacts.  
Note: Speaking clearly, say the command that you want to use. If VoiceSignal  
does not recognize a command, it prompts you to repeat the  
command. If VoiceSignal still does not recognized the command, it  
tells you “Sorry, no match found” and cancels voice recognition.  
To change the way Vsuite uses choice lists:  
1. From the Voice Settings menu, select Choice Lists. The  
following options appear in the display:  
Voice Command Tips:  
Make sure you wait for the beep before speaking.  
Automatic — Vsuite displays a choice list only when it is not sure  
Speak clearly at a normal volume, as if you were talking on the phone.  
if it has correctly recognized the name or number.  
Always On — Vsuite always displays a choice list, even when  
there is only one choice.  
Always Off — Vsuite never displays a choice list.  
Voice SVC  
72  
     
2. Select a new setting or press or  
to return to the  
Adaptation involves recording several sequences of four digits  
each. The recording process takes about a minute.  
Voice Settings menu.  
Tips for Adapting Digit Dialing  
Sensitivity  
Use Adapt Digits in a quiet place.  
1. From the Voice Settings menu, select Sensitivity.  
Make sure you wait for the beep before starting to speak.  
Speak clearly, and say each digit distinctly.  
2. Use the Up and Down navigation keys to adjust the  
selected Sensitivity setting incrementally between Reject  
More spoken commands or names and Reject Less  
spoken commands or names.  
If you make a mistake while recording a sequence of digits, or if there  
is an unexpected noise that spoils the recording, re-record that  
sequence.  
Only adapt digits if you are regularly having problems with digit dialing.  
Once you adapt, digit dialing will not work as well for other people  
using your phone. (You can always reset digit adaptation to its original  
state, as described below.)  
3. Press  
to discard the new setting and return to the Voice  
Settings menu.  
or  
to accept the new setting. Press or  
Adapt Digits  
Digit Dialing  
To adapt digit dialing, do the following:  
If you regularly have trouble with Vsuite not recognizing the  
numbers you speak, try adapting digit dialing to your voice.  
Adapting can improve the accuracy of digit recognition,  
especially for people with strong regional accents.  
1. From the Voice Settings menu, select Digit Dialing. The  
following options appear in the display:  
Adapt Digits  
Reset Digits  
Note: After you adapt Digit Dial, your phone is customized to your voice, and  
your voice only. Others will not be able to use it unless they reset the  
phone to factory defaults.  
2. Select Adapt Digits. Your phone displays text describing  
the Adapt Digits process.  
73  
   
3. Press  
or  
. Your phone displays the first digit  
7. Repeat steps 4 and 5 for another 10 sets of digits. After the  
second group of 10 sets of digits, “Adaptation complete”  
plays through the speaker and you are returned to the  
Digit Dialing menu.  
sequence and “Please say” plays through the speaker  
followed by the four digits appearing in the display.  
4. Wait for the beep and say the digits using your normal tone  
of voice. After a moment, the phone plays back the  
Reset Digits  
recording and prompts “Did the recording sound ok?”  
To reset digit dialing to factory default settings, do the following:  
1. From the Voice Settings menu, select Digit Dialing. The  
following options appear in the display:  
If the recording was good, say “Yes.”  
If you need to re-record, say “No.”  
To stop the Adapt Digits process, say “Cancel.”  
To replay the last prompt, say “Repeat.”  
Adapt Digits  
Reset Digits  
If you say “No,” the phone prompts you to pronounce the  
2. Select Reset Digits. The phone prompts you to confirm  
digits again. Wait for the beep and then say the digits.  
digit rest.  
Repeat this step until you’re satisfied with the recording.  
3. Press the OK soft key to reset your digit adaptation, or  
5. After confirming that the recording sounds “ok”, continue  
press the Back soft key to cancel.  
the recording process with the next set of digits.  
Sound  
6. After 10 sets of digits, the phone asks whether you want to  
Sound lets you specify what (if any) text prompts you want your  
phone to read to you through the earpiece.  
do more adaptation. Answer “Yes.”  
1. From the Voice Settings menu, select Sound. The following  
options appear in the display:  
Prompts — On/Off — Enables or disables audio prompts.  
Voice SVC  
74  
 
Digits — On/Off — Enables or disables digit playback.  
2. Press  
or  
to discard the new setting and return to the Voice  
Settings menu.  
to accept the new setting. Press  
or  
Names — On/Off — Enables or disables name playback.  
Name Settings — Lets you adjust the Speed (Faster or Slower)  
and Volume (Louder or Softer) of your phone’s audio name  
About  
playback. (To restore the factory Speed and Volume settings, select  
Recommended.)  
This option causes the About Nuance screen to appear in the  
2. Select the desired option and the desired setting, or  
3. Press or to accept the new setting. Press or  
to discard the new setting and return to the Sound  
menu.  
display, showing version and build information about the Vsuite  
software included on your phone.  
From the Voice Settings menu, select About.  
The About Nuance screen appears in the display showing  
the version level of the Vsuite software currently installed  
on your phone.  
Voice Launch  
To set the key or action that launches Nuance Vsuite, do the  
following:  
1. From the Voice Settings menu, select Voice Launch. The  
following options appear in the display:  
Key Only — Press and hold  
one call.  
or  
to activate Vsuite for  
Key/EarMic — Attach a headset to your phone. Press and hold  
or or press and hold the button on the headset to  
activate VoiceSignal.  
75  
     
Section 12: Camera-Camcorder  
Use your Samsung Messager II phone to take full color digital  
pictures and videos, display them on your phone’s vivid color  
display, and instantly share them with family and friends. It’s fun,  
and as easy to use as a traditional point-and-click camera or  
camcorder. This section explains how you can do the following:  
1. In standby mode, press and hold the Camera key (  
)
on the right side of the phone. The camera view finder  
screen appears in the display. (For more information, refer  
Take pictures and videos with your phone’s built-in digital camera-  
camcorder.  
Send and receive pictures and videos taken with your phone’s camera-  
camcorder.  
Set the several options associated with the camera-camcorder that  
help you take crisp, clear pictures and videos.  
Taking Pictures and Videos  
Taking pictures videos with the built-in camera-camcorder is as  
simple as choosing a subject, pointing the lens (located on the  
rear of your phone, at the top), and pressing a button.  
Note: You can also activate the camera by pressing the Menu soft key, then  
select Multimedia  
Camera.  
Taking Snap Shots (Single Pictures)  
2. Using the display as a viewfinder, point the camera at your  
subject.  
To take a single picture using the current camera settings, do the  
following:  
3. When the image that you wish to capture appears in the  
display, press the Camera key (  
) or the  
soft  
key. The photo you’ve taken appears in the display.  
Camera-Camcorder  
76  
             
To erase the photo, press the  
soft key.  
2. Press the  
soft key, then highlight the  
icon. The  
To send the photo as part of a Picture message, press the  
soft key.  
following options appear in the display:  
• Single Shot Take one photo with each press of the Camera  
button.  
To save the picture to memory, press the  
soft key.  
• Series Shot 4  
/
6
— Lets you take a series of 4 or 6 photos.  
Tip: You can change a number of the camera’s settings to suit particular  
• Mosaic Shot — Lets you take a mosaic of 1 to 18 photos.  
When you select Series Shot 4 or Series Shot 6, the Series  
progress bar (  
or  
Taking Multi Shot Pictures  
) appears in the display.  
When taking pictures of moving subjects or subjects you cannot  
pose, such as children and pets, the camera’s Multi Shot mode  
simplifies the process of taking multiple pictures in quick  
succession. After taking Multi Shot pictures, the camera  
automatically displays thumbnail views of the pictures you have  
just taken so you can select the best picture(s) and discard the  
rest.  
3. When you select Mosaic, the following options are  
available:  
• None  
• 1/18 18/18  
Select the desired number of shots.  
1. In standby mode, press and hold the Camera key (  
)
4. Using the display as a viewfinder, point the camera lens at  
on the right side of the phone. The camera view finder  
your subject.  
screen appears in the display. (For more information, refer  
5. Press the  
camera takes one picture (Single Shot) or multiple pictures  
in quick succession (Series Shot 4 or Mosaic Shot).  
6. To save the picture(s) to memory, press the soft key.  
soft key or the Camera key (  
). The  
/
6
Note: You can also activate the camera by pressing the Menu soft key, then  
select Multimedia  
Camera.  
77  
 
To discard the pictures, press the  
soft key.  
4. Press the  
soft key to save the video to memory.  
soft key to discard the video. You are  
You are prompted to confirm the erasure.  
5. Press the  
prompted to confirm the erasure.  
Taking Videos  
Screen Layouts  
Camera Screen  
To take a video using the current camcorder settings, do the  
following:  
1. In the Camera screen, press the  
soft key, then  
highlight the icon and select Camcorder. The  
camcorder view finder screen appears in the display. (For  
Note: You can also activate the camcorder from standby mode by pressing  
the Menu soft key, then selecting Multimedia  
Camcorder  
.
When you activate your phone’s camera, the second line of the  
display is reserved for the current camera resolution setting and  
the picture counter. The center of the display shows a viewfinder  
image of the subject at which the camera is pointed.  
2. Using the display as a viewfinder, point the camera lens at  
your subject.  
3. Press the Camera key when the image that you wish to  
capture appears in the display. Recording continues until  
one of the following occurs:  
Camera Screen Soft Keys  
Activates the Camera Options menu.  
You press Stop  
(
).  
Available memory is used up (Normal setting).  
30 seconds of video have been recorded (Video Msg setting).  
Camera-Camcorder  
78  
     
Shooting Mode (Mosaic) — Takes up to 18 pictures  
Takes a picture.  
manually when you press the Camera key (  
number of pictures taken depends upon the Mosaic  
setting.  
). The  
Opens the My Images folder.  
Discards the new photo.  
Size — Indicates the current camera resolution setting.  
Quality — Indicates camera’s picture quality setting.  
[You can change the picture quality setting. (For more  
Saves the new photo and includes it in a Picture  
message.  
White Balance — Indicates the current photo White  
Balance setting (Auto shown). Other options are:  
Saves the new photo.  
Sunny  
Cloudy  
Camera Screen Icons  
Tungsten  
Flourescent  
The following icons appear in the Camera screen when the Icon  
Display Camera setting is set to On  
Mode — Indicates whether in Camera mode (shown) or  
Camcorder mode ( ).  
.
ISO — Indicates camera exposure index setting (Auto,  
100, 200, or 400).  
Shooting Mode (Series) — Takes multiple pictures (4 or  
6) automatically or individually when you press the  
Camera key (  
Night Shot — Indicates whether your phone is ready to  
take photos in low light: Off (shown) or On  
). The number of pictures taken  
(
).  
depends upon the Series Shot option and the Series Shot  
A/M setting.  
79  
Photo Limit — Indicates the available number of photos  
you can take. [Depending on the camera size and  
When you activate your phone’s camcorder, the first line of the  
display is shows current camcorder setting icons. The center of  
the display shows a viewfinder image of the subject at which the  
camcorder is pointed.  
Brightness — Brightens or darkens the image from 4  
to +4.  
Camcorder Screen Soft Keys  
Activates the Camcorder Options menu.  
Self Timer in use — Delays the camera shutter for 2,  
5, or 10 seconds (10 Sec. shown) after you press the  
Camera key (  
).  
Begins recording a video.  
Ends a video recording.  
Opens the My Videos folder.  
Discards the new video.  
Phone Memory — Indicates photos will be stored in the  
phone’s memory.  
Card Memory — Indicates photos will be stored on a  
microSD Memory Card.  
Camcorder Screen  
Saves and includes the new video in a new Video  
message.  
Launches Video Player to view the new video.  
Camera-Camcorder  
80  
   
White Balance — Indicates the current video White  
Balance setting (Auto shown). Other options are:  
Saves the new video.  
Sunny  
Camcorder Screen Icons  
Cloudy  
The following icons appear in the Camcorder screen when the  
Tungsten  
Flourescent  
Icon Display Camcorder setting is set to On  
Mode — Indicates whether in Camcorder mode (shown)  
or Camera mode ( ).  
Recording Mode — Indicates camcorder’s recording  
mode setting [Limit for MMS (shown) or Normal  
.
(
)].  
S
elf Timer in use — Delays the camcorder from  
recording for 2, 5, or 10 seconds (10 Sec. shown)  
after you press the Camera key ( ).  
(You can change the recording mode setting. For more  
Quality — Indicates camcorder’s video quality setting.  
(You can change the video quality setting. For more  
Brightness — Brightens or darkens the image from 4  
to +4.  
Phone Memory — Indicates videos will be stored in the  
phone’s memory.  
Sound Recording — Indicates camcorder’s sound  
recording setting: On (shown) or Off (  
). (You can  
Card Memory — Indicates videos will be stored on a  
microSD Memory Card.  
change the video quality setting. For more information,  
Memory Available — Indicates the percentage of  
memory available for you to store a video.  
81  
and select Camcorder. The Camcorder view finder  
Saving Pictures and Videos  
screen appears in the display.  
After you’ve taken a picture or video, you can do any of the  
following:  
Shooting Mode  
Save the picture or video by pressing the  
soft key.  
Shooting Mode lets you select Fun Frames and/or take multiple  
pictures in succession when you press the Camera key ( ).  
On your phone, a picture is stored in the My Images folder. A video is  
stored in the My Videos folder. These folders are part of the phone’s  
memory and/or part of an optional Memory Card devoted to storing,  
browsing, and viewing saved pictures and videos. (For more  
1. In camera mode, press the  
soft key, then highlight  
/
/
/
. The following options are  
available:  
Access the My Images  
key.  
/
My Videos folder by pressing the  
soft  
• Single — 1 picture taken when your press the Camera key  
).  
(
Send the picture or video to someone else by pressing the  
/
• Series Shot 4 — 4 new pictures taken in succession.  
soft key.  
• Series Shot 6 — 6 new pictures taken in succession.  
• Mosaic — 1-18 new shots taken in succession and combined into  
a single picture in an array.  
Discard the picture or video by pressing the  
soft key.  
2. Select the desired option and setting. The related icon  
Camera Options  
appears in the display.  
The Camera Option buttons let you adjust the default camera  
settings to suite available lighting, the subject of the photo, or the  
purpose of the photo.  
Note: When the Shooting Mode option is set to a value other than Single  
,
either a Series Shot progress bar (  
shot icon ( ) appears in the viewfinder screen.  
) or a Mosaic  
Mode  
When you press the Camera key (  
), the camera takes  
Switches the Camera to Camcorder mode.  
several pictures in rapid succession (Multi and Mosaic).  
In camera mode, press the  
soft key, then highlight  
Camera-Camcorder  
82  
           
Size  
• Fine  
• Normal  
Change the size (in bytes) of your pictures using the Size setting.  
• Economy  
1. In camera mode, press the  
soft key, then highlight  
2. Select the quality setting of your choice. You’re returned to  
the camera viewfinder screen.  
/
/
/
/
. The following options are  
available:  
White Balance  
• 1600x1200 pixels  
• 1280x960 pixels  
• 640 X 480 pixels  
• 320x240 pixels  
• 176x144 pixels  
White Balance allows you to adjust video quality according to  
available light.  
1. In camera mode, press the  
soft key, then highlight  
. The following options  
/
/
/
/
2. Select the desired option. You’re returned to the camera  
appear in the display:  
viewfinder screen.  
• Auto — The camera automatically adjusts color balance to  
available light.  
Note: The Size setting affects zoom capabilities. When Size is set to  
• Sunny — Use this setting when taking photos in full sun.  
1600x1200 pixels, zoom is not available. When Size is set to any value  
lower than 1600x1200 pixels, zoom settings  
1
9
are available.  
• Cloudy — Use this setting when taking photos in cloudy  
conditions.  
Quality  
Tungsten — Use this setting when taking photos under  
incandescent lights.  
You can affect how much your picture is compressed, thereby  
reducing it’s overall size, not to be confused with picture Size  
(resolution).  
• Fluorescent — Use this setting when taking photos under  
fluorescent lights.  
1. In camera mode, press the  
soft key, then highlight  
/
/
. The following options appear in the display:  
83  
       
2. Select the White Balance you wish to use. The camera  
viewfinder screen appears in the display with your  
selected White Balance applied.  
• On  
2. Select the Night Shot setting of your choice. You’re  
returned to the camera viewfinder screen.  
The next time you press the Camera key (  
), the  
Self Timer  
camera applies the selected White Balance to your photo.  
Self Timer lets you delay taking a picture long enough to let you  
join others in a picture.  
ISO  
1. In camera mode, press the  
soft key, then highlight  
ISO lets you set your camera’s exposure index.  
1. In camera mode, press the soft key, then highlight  
. The options are:  
. The following options are available:  
• Off  
/
/
/
• 2 Sec.  
• 5 Sec.  
• 10 Sec.  
• Auto  
• ISO 100  
• ISO 200  
• ISO 400  
2. Select the desired Self Timer option. If you select  
2,  
5, or  
10, the Self Timer icon appears in the camera screen in the  
2. Select the ISO setting of your choice. You’re returned to the  
display.  
camera viewfinder screen.  
When you press the Camera key (  
), the countdown  
Night Shot  
timer indicates the time remaining before the camera  
takes the picture.  
Night Shot lets you take pictures in low light conditions.  
1. In camera mode, press the soft key, then highlight  
. The following options appear in the display:  
Tip: To stop or disable the Self Timer without resetting it, press  
.
/
• Off  
Camera-Camcorder  
84  
Color Effects  
Camera Settings  
Change the look of your pictures with Color Effects. Choose from  
six available settings such as Green, Negative, and Sepia. The  
selected color effect previews in the display before you take the  
picture.  
When you change a setting, your change is retained until you  
change that setting or reset all your camera settings.  
Memory  
1. In camera mode, press the  
soft key, then highlight  
1. In camera mode, press the  
soft key, then highlight  
(
) and select Memory. The following storage options  
. The following options pop-up:  
appear in the display:  
Note: To disable Color Effects, choose Normal  
.
• Phone — Stores pictures in phone memory.  
• Card — Stores pictures on an optional microSD Memory Card.  
2. Select the memory location setting of your choice. You’re  
returned to the camera viewfinder screen.  
• Normal — Subjects and pictures appear with a normal hue.  
• Black&White — Subjects and pictures appear in black and white.  
• Sepia — Subjects and pictures appear in a brownish-gray hue.  
• Negative — Subjects and pictures appear in inverted colors.  
• Green — Subjects and pictures appear in a greenish hue.  
• Aqua — Subjects and pictures appear in an aqua hue.  
2. Select the color effect of your choice. You’re returned to  
the camera viewfinder screen.  
Auto Save  
1. In camera mode, press the  
soft key, then highlight  
(
) and select Auto Save. The following options appear  
in the display:  
• Off  
• On  
When you take your next picture, the phone’s display  
2. Select the automatic save setting of your choice. You’re  
returned to the camera viewfinder screen.  
previews your subject image with the selected color effect.  
85  
 
Series Shot A/M  
2. Select the Metering setting of your choice. You’re returned  
to the camera viewfinder screen.  
Series Shot A/M lets you select whether the Camera takes Series  
Shot automatically, in quick succession, when you press the  
When you take your next picture, the phone’s display  
Camera key (  
1. In camera mode, press the  
) and select Series Shot A/M  
).  
previews your subject image with the measured exposure.  
soft key, then highlight  
.
Icon Display  
(
View Mode lets you quickly add or remove elements of the  
Camera viewfinder screen.  
• Auto — The Camera takes the selected number of Series Shots in  
quick succession.  
1. In camera mode, press the  
soft key, then highlight  
• Manual — The Camera takes one of the selected number of  
Series Shots each time you press the Camera key (  
).  
(
) and select Icon Display. The following options  
2. Select the series shot setting of your choice. You’re  
appear in the display:  
returned to the camera viewfinder screen.  
• DisplayAll — All Camera display icons appear in the Camera view  
finder screen.  
Metering  
• Guideline — Removes the Camera display icons (if displayed) and  
displays a crosshatch pattern in the Camera view finder screen.  
1. In camera mode, press the  
soft key, then highlight  
(
) and select Metering. The following options appear  
Camera display icons appear when you press the  
soft key.  
in the display:  
• No Icons — Removes the Camera display icons (if displayed) from  
the Camera view finder screen. Camera display icons appear when  
• Average — Adjusts exposure to the average light level over a large  
picture area.  
you press the  
soft key.  
Shutter Sound  
• Center — Adjusts exposure to the average light level over a center  
portion of the subject.  
Choose from four different sounds whenever you take a picture.  
Aside from being a cool sound effect, Shutter Sounds act as an  
audible reminder that your camera has taken a picture.  
• Spot — Adjusts exposure to the light level over a small portion of  
the subject.  
Camera-Camcorder  
86  
1. In camera mode, press the  
soft key, then highlight  
Mode  
(
) and select Shutter Sound. The following shutter  
Switches the Camcorder to Camera mode.  
sounds appear in the display:  
In camcorder mode, press the  
and select Camera. The Camera view finder  
screen appears in the display.  
soft key, then highlight  
• Off  
/
• Shutter  
• OK  
Recording Mode  
1. In camcorder mode, press the  
• DingDong  
soft key, then highlight  
2. Select the shutter sound setting of your choice. You’re  
returned to the camera viewfinder screen.  
/
. The following options appear in the display:  
• Limit for MMS — Record videos that are a maximum of 30  
seconds long. The videos can be included in video messages.  
Reset Settings  
• Normal — Record videos that are any length up, depending on  
This option lets you reset the Camera’s settings to their factory  
default values.  
available memory.  
2. Select the desired recording mode setting. You are  
In camera mode, press the  
) and select Reset Settings. You are prompted to  
confirm the reset.  
soft key, then highlight  
returned to the camcorder viewfinder screen.  
(
Quality  
To reset the Camera settings, select Yes  
.
You can affect how much your picture is compressed, thereby  
reducing it’s overall size, not to be confused with picture Size  
(resolution).  
To keep the current Camera settings, select No  
.
Camcorder Options  
The Camcorder Options let you adjust the default camcorder  
settings to suite available lighting, the subject of the video, or the  
purpose of the video.  
1. In camcorder mode, press the  
soft key, then highlight  
/
/
. The following options appear in the display:  
• Fine  
87  
         
• Normal  
• Sunny — Use this setting when recording videos in full sun.  
• Economy  
• Cloudy — Use this setting when recording videos in cloudy  
conditions.  
2. Select the quality setting of your choice. You’re returned to  
the camcorder viewfinder screen.  
Tungsten — Use this setting when recording videos under  
incandescent lights.  
• Fluorescent — Use this setting when recording videos under  
fluorescent lights.  
Note: The Quality is affected by the Recording Mode setting. When Recording  
Mode is set to Limit for MMS, the Quality setting is locked at Economy  
.
2. Select the White Balance you wish to use. The camera  
viewfinder screen appears in the display with your  
selected White Balance applied.  
Video Sound  
Video Sound lets you enable or disable sound recording by the  
Camcorder when you record a video.  
The next time you press the Camera key (  
), the  
1. In camcorder mode, press the  
soft key, then highlight  
camera applies the selected White Balance to your photo.  
/
. The following options appear in the display:  
Color Effects  
• On — Record sound with the video.  
• Off — Do not record sound with the video.  
Change the look of your videos with Color Effects. Choose from  
six available settings such as Green, Negative, and Sepia. The  
selected color effect previews in the display before you take the  
picture.  
White Balance  
White Balance allows you to adjust video quality according to  
available light.  
1. In camcorder mode, press the  
soft key, then highlight  
1. In camcorder mode, press the  
soft key, then highlight  
. The following options  
. The following options appear in the display:  
/
/
/
/
appear in the display:  
Note: To disable Color Effects, choose Normal  
.
• Auto — The Camcorder automatically adjusts color balance to  
available light.  
• Normal — Subjects and videos appear with a normal hue.  
Camera-Camcorder  
88  
   
• Black&White — Subjects and videos appear in black and white.  
• Sepia — Subjects and videos appear in a brownish-gray hue.  
• Negative — Subjects and videos appear in inverted colors.  
• Green — Subjects and videos appear in a greenish hue.  
• Aqua — Subjects and videos appear in an aqua hue.  
2. Select the color effect of your choice. You’re returned to  
the camcorder viewfinder screen.  
When you press the Camera key (  
), the countdown  
timer indicates the time remaining before the camcorder  
records the video.  
Tip: To stop or disable the Self Timer without resetting it, press  
.
Camcorder Settings  
Memory  
When you record your next video, the phone’s display  
previews your subject image with the selected color effect.  
1. In camcorder mode, press the  
soft key, then highlight  
(
) and select Memory. The following storage options  
appear in the display:  
Self Timer  
• Phone — Stores videos in phone memory.  
Self Timer lets you delay recording a video long enough to let you  
join others in the video.  
• Card — Stores videos on an optional microSD Memory Card.  
2. Select the memory location setting of your choice. You’re  
returned to the Camcorder viewfinder screen.  
1. In camcorder mode, press the  
soft key, then highlight  
. The following options are available:  
• Off  
Auto Save  
• 2 Sec.  
• 5 Sec.  
• 10 Sec.  
1. In camcorder mode, press the  
soft key, then highlight  
(
) and select Auto Save. The following options appear  
in the display:  
2. Select the desired Self Timer option. If you select  
2
,
5, or  
• Off  
• On  
10, the Self Timer icon appears in the camcorder screen in  
the display.  
89  
 
2. Select the automatic save setting of your choice. You’re  
1. In camcorder mode, press the  
soft key, then highlight  
returned to the camcorder viewfinder screen.  
(
) and select Start Sound. The following Start Sound  
options appear in the display:  
Icon Display  
• Off  
View Mode lets you quickly add or remove elements of the  
Camera viewfinder screen.  
• Look here  
• 1,2,3!  
1. In camcorder mode, press the  
soft key, then highlight  
2. Select the desired start sound. You’re returned to the  
camcorder viewfinder screen.  
(
) and select Icon Display. The following options  
appear in the display:  
End Sound  
• Display All — All Camcorder display icons appear in the  
Camcorder view finder screen.  
Choose from two different sounds whenever you stop video  
recording. Aside from being a cool sound effect, End Sound acts  
as an audible reminder that your camcorder has stopped  
recording a video.  
• No Icons — Removes the Camcorder display icons (if displayed)  
from the Camcorder view finder screen. Camcorder display icons  
appear when you press the  
soft key.  
2. Select the desired Icon Display setting. You’re returned to  
1. In camcorder mode, press the  
soft key, then highlight  
the camcorder viewfinder screen.  
(
) and select End Sound. The following End Sound  
Start Sound  
options appear in the display:  
Choose from two different sounds whenever you begin video  
recording. Aside from being a cool sound effect, Start Sound acts  
as an audible reminder that your camcorder has begun recording  
a video.  
• Off  
• OK  
• Melody  
2. Select the desired end sound. You’re returned to the  
camcorder viewfinder screen.  
Camera-Camcorder  
90  
Reset Settings  
The next time you press the Camera key (  
), the  
Camera takes an enlarged picture or the Camcorder  
records an enlarged video, according to your selected  
Zoom setting.  
This option lets you reset the Camcorder’s settings to their  
factory default values.  
In camcorder mode, press the  
) and select Reset Settings. You are prompted to  
confirm the reset.  
soft key, then highlight  
(
Brightness  
Brightness lets you temporarily lighten the pictures you take or  
videos you record. Increasing the Brightness (-4 – +4) lightens  
your pictures or videos (0 is normal).  
To reset the Camcorder settings, select Yes  
.
To keep the current Camcorder settings, select No  
.
Camera-Camcorder Adjustments  
1. In camera mode, press the Navigation key Up or Down.  
The Brightness adjustment appears in the display.  
Zoom  
Zoom lets you temporarily enlarge the pictures you take or videos  
you record. Increasing the Zoom (2 – 9) enlarges your pictures or  
videos (1 is normal).  
2. To brighten your next picture(s), press the Navigation key  
Up. To darken your next picture(s), press the Navigation  
key Down. (The screen image lightens or darkens to show  
the affects of your changes).  
Note: Zoom is not available to the Camera if the Size Camera option is set to  
1600x1200  
.
The next time you press the Camera key (  
), the  
In camera or camcorder viewfinder screen, press the  
Navigation key Left and Right to adjust the Zoom. The  
Zoom adjustment appears in the display, and the screen  
image enlarges to show the affects of your changes.  
camera takes a lighter or darker picture or records a lighter  
or darker video according to your selected Brightness  
setting.  
91  
   
• Copy — Copy the currently highlighted or displayed image from  
phone memory to a Memory Card or from a Memory Card to phone  
memory.  
The Photo Gallery  
Saved pictures are stored in the My Images folder. You can  
browse the pictures one at a time (expanded mode), or view  
several pictures at once in thumbnail format.  
• Lock/Unlock — Prevent/allow erasure of the currently highlighted  
or displayed image.  
1. In the Camera viewfinder screen, press the  
Any pictures that you’ve saved are listed with their  
thumbnail images in the display.  
soft key.  
• Erase Files — Delete one or more marked images from the My  
Images folder.  
• Picture Info — View the Name, Date and Time created,  
Resolution, and Size of the currently highlighted or displayed image.  
2. To launch the Camera and take new pictures, press the  
5. Select the desired option to perform its function or to enter  
Camera soft key.  
its sub-menu.  
3. To view a picture, press the VIEW soft key.  
The Video Gallery  
Saved videos are stored in the My Videos folder. You can browse  
the videos one at a time (expanded mode), or view several videos  
at once in thumbnail format.  
4. For more options, press the Options soft key. The following  
additional options pop-up:  
• Send — Send the currently highlighted or displayed image as part  
of a Picture Message or Via a Bluetooth connection.  
1. In the Camcorder viewfinder screen, press the  
soft  
• Set As — Assign the currently highlighted or displayed image as  
the Main Wallpaper or as the Picture ID for a Contact.  
key. Any videos that you’ve saved are listed with their  
thumbnail images in the display.  
• Rename — Change the name of the picture file.  
2. To launch the Camcorder and record a video, press the  
• Move — Relocate the currently highlighted or displayed image  
from phone memory to a Memory Card or from a Memory Card to  
phone memory.  
Video soft key.  
Camera-Camcorder  
92  
             
3. To launch the Video Player and view a video, highlight the  
Note: To enlarge the video playback, press the Full Screen soft key.  
video and press the PLAY soft key.  
The following controls are available  
To pause/resume playing a video, press  
.
To stop playing a video, press the Down navigation key.  
Tip: To view a video in landscape mode, open the QWERTY keypad.  
To skip play to an earlier video in the My Videos folder, press the  
Left navigation key.  
To skip play to a later video in the My Videos folder, press the Right  
navigation key.  
To return to the My Videos folder and choose another video file to  
play, press the Up navigation key.  
4. To access video options, press the Options soft key. The  
following options pop-up:  
• Send — Lets you send the highlighted video as part of a Video  
Message or Via a Bluetooth connection.  
• Rename — Rename the highlighted video.  
93  
• Move — Relocate the highlighted video from phone memory to a  
3. Using the display as a viewfinder, take the desired picture  
Memory Card or from a Memory Card to phone memory.  
or begin record the desired video by pressing the Camera  
• Copy — Copy one or more videos from phone memory to a  
Memory Card or from a Memory Card to phone memory.  
key (  
(
). To stop video recording, press the Camera key  
) again.  
• Lock Unlock — Prevent/allow erasure of one or more images.  
/
The photo/video review screen appears in the display.  
4. Press the soft key.  
• Erase Files — Delete one or more marked unlocked videos from  
the My Videos folder.  
/
• Video Info — View the Name, Date and Time created, Resolution,  
Size, and Duration of the currently highlighted video.  
5. Enter the recipient’s phone number or E-Mail address  
using the keypad.  
5. Select the desired option to perform its function or to enter  
6. Press the OK soft key to save the address(es).  
its sub-menu.  
7. Select other message fields as needed. (For more  
Point, Click, and Send Pictures and Videos  
Take a picture or record a video and send it to anyone with a  
compatible device in a few easy steps.  
8. When you are finished composing your message, press  
SEND soft key to send the Picture or Video message to the  
intended recipient(s).  
Note: To record and send a video while in Camcorder mode, set Shooting  
Mode to Limit for MMS  
(
) .  
1. In standby mode, press and hold the Camera key (  
on the right side of the phone. The camera view finder  
screen appears in the display.  
)
2. To record a video, press the  
soft key. The camcorder  
view finder screen appears in the display.  
Camera-Camcorder  
94  
     
Section 13: Multimedia  
Use your Samsung Messager II phone to take full color digital  
pictures, display them on your phone’s vivid color display, and  
instantly share them with family and friends.  
• My Images — Lets you choose the multi-media or pictures that  
appear in your phone’s display.  
With Mobile Shop, you can download personalized ringtones,  
pictures, and more. For more information, contact your  
Wireless Carrier.  
• My Videos — Lets you choose and play the videos that appear in  
• My Ringtones — Lets you assign melody tones for calls, alarms,  
Note: Although the procedures in this section are written for the phone  
keypad, you can also perform these procedures using the QWERTY  
keypad.  
and other alerts.  
• My Sounds — Lets you assign melody tones for calls, alarms, and  
other alerts.  
Accessing Multimedia  
• Ringback Tones — Launches the Browser to access your account  
and subscribe to and/or manage your ringback tones.  
1. In standby mode, press the Menu soft key, then select  
Multimedia. The following Multimedia sub-menus appear  
in the display:  
2. Select a sub-menu to launch it. The following sections  
describe the above listed sub-menus in greater detail.  
• Camera — Lets you launch and set up your phone’s camera. (For  
Using My Images Gallery  
My Images lets you manage your photos and pictures you  
download, and lets you choose the pictures that appear in your  
phone’s display when you turn it on or off, while in standby mode  
(wallpaper), and as image IDs for your contacts.  
• Camcorder — Lets you launch and set up your phone’s  
• Music Player — Lets you launch and set up your phone’s music  
player and manage music files stored on an optional microSD  
95  
       
Erase Files — Delete one or more marked images from the My  
Images folder.  
1. In standby mode, press the Menu soft key, then select  
Multimedia My Images. A multiple-page matrix of  
thumbnail views of saved photos and images appears in  
the display.  
Picture Info — View the Name, Date and Time created, Resolution,  
and Size of the currently highlighted or displayed image.  
Get More Graphics — Launches the Browser to let you locate and  
download graphics files.  
2. Highlight an image or photo. You have the following  
Select the desired option and a desired value.  
3. To return to the previous menu, press  
options:  
or  
. To  
To take new photos, press the Camera soft key.  
return to standby mode, press  
.
To expand the highlighted image to fill the screen, press VIEW  
(
Using Your Music Player  
or  
).  
To access other options, press the Options soft key. The following  
Music Player lets you play MP3 and unprotected AAC, AAC+,  
WMA music files, loaded onto an optional microSD™ Memory  
Card using a personal computer. (For information on loading  
options appear in the display:  
Send — Send image as part of a Picture Message or Via a Bluetooth  
for more information.)  
Set As — Assign the currently highlighted or displayed image as the  
Launching the Music Library Menu  
1. In standby mode, press the Menu soft key, then select  
Multimedia Music Player.  
Main Wallpaper or as the Picture ID for a Contact.  
Rename — Change the name of the picture file.  
Move — Relocate the currently highlighted or displayed image from  
phone memory to a Memory Card or from a Memory Card to phone  
memory.  
– Or –  
Copy — Copy the currently highlighted or displayed image from phone  
memory to a Memory Card or from a Memory Card to phone memory.  
On the Music Player screen, press the Library soft key.  
2. The Library menu appears in the display showing the  
Lock/Unlock — Prevent/allow erasure of the currently highlighted or  
displayed image.  
following options:  
Multimedia  
96  
     
Add to Playlist — Lets you add a marked music file to an existing  
playlist.  
• Now Playing — Music Player mode only — Indicates number of  
music files currently playing. Select this option (or press the Back  
soft key) to return to the Music Player screen.  
Song Info — Lists the title, artist, album, genres, copyright  
information, time length, file size, and bit rate of the highlighted music  
file.  
• All — Lists all music files on the Memory Card and lets you play  
individual music files or play multiple music files by creating a  
temporary music playlist.  
Select the desired option.  
• Artists — Lists artist names for music files on the Memory Card  
and lets you play one or more music files by a selected artist.  
Playing Music  
1. At the Multimedia menu, select Music Player. The Library  
screen appears in the display, showing the following  
options:  
• Albums — Lists album titles for music files on the Memory Card  
and lets you play one or more music files from a selected album.  
• Recently Added — Lists music files last added to your music  
Library.  
• All  
• Playlists — Lists any playlists you have saved and lets you create,  
• Artists  
save, and manage playlists.  
• Albums  
3. Use the Navigation key or Arrow keys to highlight a music  
• Recently Added  
• Playlists  
file, then:  
To play the file, press the Play soft key.  
2. Highlight the desired option,  
To select the file for playing or other options, press MARK  
(
).  
press OPEN  
(
), and then do  
To select and apply any of the following options to the highlighted or  
marked music file(s), press the Options soft key:  
one of the following:  
• All option — Highlight a music  
file, then press the Play soft key  
to play the file.  
Mark All — Marks all listed music files for playing, removal, or  
assignment of player settings.  
Erase — Deletes highlighted or marked music file(s) from the Memory  
Card.  
97  
To return to the selected list and choose another music file to play,  
press the Up navigation key.  
Tip: To play additional files, use the Left and Right navigation keys, or  
highlight and mark additional files for playback. (For more information,  
Library soft key — Returns you to the Library screen.  
Options soft key — Shows the following sub-menus and options:  
• Other options — Use the Navigation key to highlight an Artist,  
Play Mode — Lets you change the play mode from Normal, Shuffle,  
Repeat One, or Repeat All.  
Album, Recently Added, or Playlist, then press OPEN  
(
).  
Use the Navigation key to highlight a music file, then press the Play soft  
key to play the file.  
The Music Player screen appears in the display and the  
selected music file/playlist begins playing.  
Add to Playlist — Moves you to the Playlists menu to let you add the  
selected music file to a playlist.  
Remove — Deletes the selected music file from the Memory Card  
Visual Supplements — Lets you change the Music Player visualization  
to Simple View, Equalizer, Album Art, or Lyrics.  
Memory Info — Displays the Memory Usage screen which lists  
Memory Card usage and availability amounts.  
Song Info — Lists the title, artist, album, genre, copyright information,  
time length, file size, and bit rate of the highlighted music file.  
Music Player Controls  
Volume key:  
To play a music file louder, press the  
Volume key Up.  
To play a music file softer, press the  
Volume key Down.  
Select the desired option to launch the option or to access the sub-  
menu.  
Navigation key  
:
To pause/resume playing a music file,  
Loading Music Files  
press  
.
To transfer music to a microSD™ Memory Card, do the  
following:  
To stop playing a music file, press the  
Down navigation key.  
To skip play to an earlier music file in the selected list, press the Left  
navigation key.  
To skip play to a later music file in the selected list, press the Right  
navigation key.  
1. Before loading music files on a Memory Card, do the  
following:  
Multimedia  
98  
 
With your phone powered off, insert the Memory Card into your  
phone. (For more information, see “Install a Memory Card” on  
page 8.)  
Using My Ringtones Gallery  
My Ringtones lets you assign ringtones for calls, alarms, and  
other alerts.  
Power your phone on.  
1. In standby mode, press the Menu soft key, then select  
Multimedia My Ringtones. A list of ringtones appears  
in the display.  
When the Memory Card icon (  
) appears in the display, remove  
the Memory Card from your phone. (For more information, see  
2. Insert the Memory Card into a compatible card reader.  
2. Highlight a ringtone. You have the following options:  
To assign the highlighted ringtone to be used as a Ringtone, a  
Contact ID, or an Alert Tone, press the Set As soft key.  
Note: Card readers vary. Follow the installation instructions included with  
your card reader and personal computer.  
To hear the ringtone, press PLAY  
To show title and file type for the highlighted ringtone, press the  
Options soft key, then select Ringtone Info  
3. To return to the previous menu, press  
(
or  
).  
3. Open the Memory Card reader drive and the “My_Music”  
folder.  
.
4. Drag or download music (MP3) files into the “My_Music”  
or  
. To  
folder.  
return to standby mode, press  
.
5. Remove the Memory Card by following the removal  
instructions for the Memory Card reader and for your  
personal computer.  
Using My Sounds Gallery  
My Sounds lets you record and manage voice memo files and  
assign melodies as ringers or alerts.  
1. In standby mode, press the Menu soft key, then select  
6. Insert the Memory Card into your phone. (For more  
Multimedia My Sounds.  
The following options appear in the display:  
Record New — Lets you record voice memos.  
99  
       
Erase all — Erase all unlocked voice memos.  
A list of recorded voice memo files and melodies.  
Sound Info — Shows the title, size, type, and date for the file.  
2. When you select Record  
New, the Record New screen  
appears in the display.  
4. When you highlight a melody file, you have the following  
options:  
To hear the ringtone, press PLAY  
(
or  
).  
To start recording a voice memo,  
press REC or ).  
(
Press the Options soft key to show the following options:  
To pause/resume recording,  
press the Pause soft key.  
Send — Send to someone as part of a Picture message. (See “Send  
Picture/Video Messages” on page 56 for more information.)  
Set As — assign the highlighted ringtone to be used as a Ringtone  
,
To stop recording and save the  
Contact ID, or as the Alert Tone  
.
voice memo, press SAVE  
(
or  
).  
Erase all — Erase all unlocked melodies.  
3. When you highlight a saved  
voice memo file, you have the following options:  
Sound Info — Shows the title, size, type, and date for the file.  
5. To return to the previous menu, press  
return to standby mode, press  
or  
. To  
.
To erase the selected voice memo file, if it is unlocked, press the  
Erase soft key.  
To listen to the voice memo, press PLAY  
(
or  
).  
Press the Options soft key, and the following options appear in the  
display:  
Send — Send to someone as part of a Picture message. (See “Send  
Picture/Video Messages” on page 56 for more information.)  
Set As — assign the highlighted ringtone to be used as a Ringtone  
Contact ID, or as the Alert Tone  
Rename — Change the name of the voice memo file.  
Lock Unlock — Block/permit erasure of the highlighted image.  
,
.
/
Multimedia  
100  
Section 14: Tools/Utilities  
This section explains how you can use your phone’s Personal  
Information Manager (PIM) functions to view today’s calendar,  
schedule appointments, set an alarm, perform simple math  
calculations, and more.  
Turn Bluetooth On/Off  
When the Bluetooth is turned on, you can use the Bluetooth  
features available. When the Bluetooth is turned off, you cannot  
send or receive information via Bluetooth. To save battery life or  
in situations where Bluetooth use is prohibited, such as airline  
traveling, you can turn off the Bluetooth wireless technology  
headset.  
Accessing Your Phone’s Tools  
To launch the Tools/Utilities menu:  
In standby mode, press the Menu soft key, then select  
Tools/Utilities. The Tools/Utilities menu appears in the  
display.  
To turn Bluetooth support on:  
From the Tools/Utilities menu, select Bluetooth ➔  
Bluetooth Settings Enable.  
Bluetooth  
Bluetooth set to on” and the red Bluetooth On icon (  
)
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection.  
appear in the display.  
To turn Bluetooth support off:  
Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of  
one another, you can exchange information between them, even  
if they are located in different rooms.  
From the Tools/Utilities menu, select Bluetooth ➔  
Bluetooth Settings Disable.  
Bluetooth set to off” appears in the display and the and  
the Bluetooth On icon ( ) disappears.  
The Bluetooth wireless technology settings menu provides the  
ability to view and change the device name, show the visibility,  
and set the security for the device.  
101  
         
Add New Device  
5. Press OK  
(
or  
). Names of the available devices  
appears in the display.  
To search for available Bluetooth devices:  
1. From the Tools/Utilities menu, select Bluetooth. The  
following options appear in the display:  
6. Use the navigation keys to highlight the device you want to  
pair with your phone.  
Registered List  
7. Press PAIR ( or  
) to pair the selected device with  
Bluetooth Settings  
the phone. You are prompted to enter the passkey or PIN  
for the selected device.  
2. Select Registered List.  
If there are no Bluetooth devices registered, the Add New  
8. Enter the device passkey or PIN and press  
or  
.
Device screen appears in the display. (See Step 3.)  
Pop-up messages appear to inform you that pairing with  
the device is complete and prompting you to connect with  
the device.  
If Bluetooth is off, you are prompted to “Turn bluetooth  
on?”. Press the Yes soft key to turn Bluetooth on.  
9. To connect with the device, press the Yes soft key. To  
return to the Bluetooth menu without connecting to the  
device, press the No soft key.  
Note: To leave Bluetooth off and return to the Bluetooth sub menu, press the  
No soft key.  
3. Select Add New Device.  
Place device you are connecting to in discovery  
mode” appears in the display.  
4. Place the Bluetooth device in discoverable mode. (See the  
device user manual for more information.)  
Tools/Utilities  
102  
 
Managing Your Registered List  
Registered List  
1. From the Registered List, highlight a device and press the  
Options soft key. The following options appear in the  
display:  
This menu provides a list of  
Bluetooth wireless technology  
devices discovered by your handset.  
From the Tools/Utilities  
menu, select Bluetooth ➔  
Registered List. A list of  
registered Bluetooth devices  
appears in the display.  
Remove Device — Deletes the device from the Registered List.  
Rename Device — Lets you change or replace the device name,  
as needed.  
• Incoming Security — Lets you choose whether to Always Ask  
approval before connecting with a device or to Always Connect to  
the device without asking for approval.  
Connecting to a Bluetooth Device  
• Service Discovery — Lists the Bluetooth profiles that apply to this  
device.  
1. From the Registered List, highlight the device and press  
Device Info — Shows the type of device, status, address, the date  
when it was paired with your phone, and the date the device was  
last connected with your phone.  
or  
.
2. If you are unable to connect with the device a pop-up  
appears in the display. Press the Yes soft key to retry.  
• Send Name Card — Lets you send selected Contact(s) information  
to another Bluetooth device.  
Disconnecting from a Bluetooth Device  
• Get Files — Lets you retrieve copies files from another device.  
From the Registered List, highlight the device and press  
2. Select the desired option to access it.  
the Off soft key.  
Bluetooth Settings  
To access Bluetooth settings:  
From the Tools/Utilities menu, select Bluetooth ➔  
Bluetooth Settings.  
103  
The following options appear in the display:  
Calendar  
Calendar allows you to view the  
current, past, or future month in  
calendar format. While viewing the  
calendar, the current date is  
highlighted, and days with scheduled  
events are surrounded by a box.  
Enable/Disable  
Selecting this option turns Bluetooth on or off. (For more  
Discovery Mode  
Allows other users to see your accessibility. Select On for other  
devices to see your device, or Off for no visibility.  
View an Event  
1. From the Tools/Utilities  
Device Name  
Shows the handset name. You may change this name. Enter the  
menu, select Calendar. A calendar appears in the display  
with the current date highlighted. The month and year  
appear at the top of the display.  
text and press  
or  
.
Supported Profiles  
Lists and describes the Bluetooth profiles your phone supports.  
2. Use the following options and navigation keys to move  
Device Info  
around within the calendar:  
Shows the Bluetooth Type, Status, and Address of your phone.  
To move to an individual day, one day or one week at a time, press  
the Navigation keys or Arrow keys.  
To view previous months, press the Up volume key.  
To view future months, press the Down volume key.  
To add an event to the highlighted date, press the Add soft key.  
To call up a list of events on the highlighted date, press VIEW  
(
or  
). The following options are available:  
To add an event, press the Add soft key.  
Tools/Utilities  
104  
       
To show the details of an event, press VIEW  
(
).  
Erase — Remove this event from the Calendar.  
Select the desired option.  
Add a New Event  
Press the Options soft key to return to the Monthly calendar or to Erase  
a highlighted event or Erase all events.  
To access other options while viewing the calendar, press the  
Options soft key. The following options pop-up in the display:  
1. From the Tools/Utilities menu, select Calendar.  
A calendar appears in the display with the current date  
highlighted. The month and year appear at the top of the  
display.  
Go to Date — Lets you jump to any date you specify.  
Go to Today — Lets you return to today from any other date.  
Erase Old — Lets you erase past events.  
Erase all — Lets you erase all events.  
2. Press the Add soft key. The  
New Event screen appears in  
the display.  
Select the desired option and perform the related process.  
3. Press VIEW ( or ) to  
display the specifics of the  
highlighted event. The  
following options are  
available:  
Use the Up and Down navigation  
keys to highlight New Event  
options.  
Use the Left and Right navigation  
keys to select option values.  
To change the event details, press  
the Edit soft key. (See “Add a  
more information.)  
Use the keypad to enter option  
values.  
3. Enter the Name of the new event using the keypad.  
To return to the Events list, press  
OK  
(
or  
).  
For more options, press the Options soft key. The following options  
appear in the display:  
Monthly — Returns you to the Monthly calendar display.  
105  
   
Memo Pad  
Note: The current mode of text entry is indicated in the lower left corner of  
the display.  
Create notes and store them in  
Memo Pad. Notes that you create in  
Return to Memo Pad anytime to  
review and edit your notes.  
4. To set the Start Date, use the keypad to enter the start  
date for the event.  
5. To set the Start Time:  
Note: Memo Pad can’t be prioritized or  
assigned an alert.  
Use the keypad to enter the time for the event.  
Use the Left and Right navigation keys to select AM or PM  
.
Create a Memo  
1. From the Tools/Utilities menu, select Memo Pad.  
6. Repeat Steps 4 and 5 for the End Date and End Time.  
7. Use the Left and Right navigation keys or arrow keys to  
If you have any stored memos, they appear as a list in the  
display.  
select:  
Alert type (Tone, Vibrate, Light Only)  
2. If you don’t have any stored memos, press the Add soft  
Alert tone (the Alert Tone screen appears in the display. See  
Sounds Gallery” on page 99 for more information.)  
key to add a memo.  
3. Enter memo text using the keypad. (For more information,  
Reminder  
(
Off  
15 Min. Before  
5 Hours Before  
10 Min. Before  
8. Press SAVE or  
,
Once  
,
Every 2 Minutes  
30 Min. Before  
1 Day Before  
,
Every 15 Minutes  
1 Hour Before  
On Time 5 Min.  
)
Alert time  
Hours Before  
(
,
,
,
3
,
,
,
,
Tip: The current mode of text entry is indicated in the lower right corner of  
Before  
,
)
the display.  
(
) to store the event in your  
4. When you’re finished entering details for the memo, press  
calendar. An alarm will notify you prior to the event,  
OK  
(
or  
). The memo is stored.  
provided you set Reminder to a value other than Off.  
Tools/Utilities  
106  
     
Review, Edit, and Erase Memos  
Alarm Clock  
1. From the Tools/Utilities menu, select Memo Pad. Your list  
of stored memos appears in the display.  
Your phone has three alarm clocks that can be set to go off once,  
or to recur daily at a specific time. Once set, an alarm clock is  
easy to change or turn off completely.  
2. Highlight the desired memo. You have the following  
options:  
Note: The alarm doesn’t function when the phone is turned off. If the time for  
an alarm that was set for Once has elapsed while the phone is off, the  
alarm occurs at the specified time on the next day.  
To add a new memo, press the Add soft key. (For more information,  
To review the highlighted memo, press VIEW  
(
or  
).  
1. From the Tools/Utilities menu, select Alarm Clock. The  
While viewing a memo, you can do any of the following:  
following options appear in the display:  
Change the text of the memo by pressing the Edit soft key and using  
Alarm 1  
Alarm 2  
Alarm 3  
Return to the Memo Pad screen by pressing OK  
(
or  
).  
Press the Options soft key to Erase the memo you are viewing, Add a  
New Memo, or Lock/Unlock the memo you are viewing.  
2. Select the alarm clock you  
wish to set. The selected Set  
Alarm screen appears in the  
display.  
For more options, press the Options soft key and the following  
options appear in the display:  
Edit— Change the text of the highlighted memo by using the keypad.  
Use the Up and Down  
navigation keys to highlight  
Set Alarm options.  
Erase — Erase the highlighted memo.  
Erase all — Erase all of the unlocked memos.  
Lock Unlock — Prevents/allows erasure of the highlighted memo.  
/
3. Select the desired option.  
107  
   
3. Use the Left and Right navigation/arrow keys to set the  
If the alarm was set as a Daily alarm, the alarm icon remains in the top  
of the display.  
alarm Off or On.  
If the alarm was set as a Once only alarm, the alarm icon disappears  
from the top of the display.  
4. To set the Time:  
Enter the time for the alarm using the keypad.  
Use the Left and Right navigation keys to select AM or PM  
Turn Off the Alarm  
1. From the Tools/Utilities menu, select Alarm Clock. The  
following options appear in the display:  
.
5. Use the Left and Right navigation/arrow keys to select the  
Frequency at which you wish the alarm to occur (Daily,  
Mon.-Fri., Weekends, or Once).  
Alarm 1  
Alarm 2  
Alarm 3  
6. Use the navigation/arrow keys to select the Ringer type  
(Tone, Vibrate, Light Only) and ringtone (from My  
Ringtones or My Sounds).  
2. Highlight the desired alarm, then press the Options soft  
key.  
7. When you’re finished entering the time and frequency for  
The following options appear in the display:  
the alarm, press SAVE  
(
or  
). If the alarm is set to  
On Off — Enables/disables the highlighted alarm without  
/
On and if Buetooth is disabled, the alarm icon (  
)
changing the settings.  
appears in the top of the display.  
Reset Alarm — Disables the highlighted alarm and restores its  
settings to default values.  
When an Alarm Sounds  
Reset All — Disables all alarms and resets all alarm settings to  
default values.  
An animated alarm clock appears in the display along with  
Snooze and Dismiss options and an alert sounds when the  
specified time for the alarm arrives.  
3. Select the desired option.  
To silence the alarm, use the Navigation key to highlight Snooze or  
Dismiss and press  
.
Tools/Utilities  
108  
   
3. Use the Left and Right navigation/arrow keys to browse  
locations and their current times. The following locations  
are supported.  
World Time  
World Time lets you view the time of  
day or night in any of the 24 different  
time zones around the world.  
EST/EDT :  
Caracas, La Paz  
Newfoundland  
New York, Miami  
Note: To use World Time, you need to  
subscribe to your Wireless Provider’s  
digital service.  
Buenos Aires,  
Brasilia  
Mid Atlantic  
Cape Verde  
London, Lisbon  
Rome, Paris,  
Berlin  
Athens, Helsinki,  
Istanbul  
From the Tools/Utilities  
menu, select World Time. A  
Moscow, Jidda,  
Nairobi  
Tehran  
Dubai  
world map appears in the display, showing the time and  
date in one or two cities or time zones.  
Kabul  
Kirachi, Tashkent Mumbai, New  
Delhi  
Selecting/Displaying Time Zones  
Kathmandu  
Almaty, Dhaka  
Bangkok,  
Jakarta, Hanoi  
World Time lets you view the time and date in up to two locations  
or time zones.  
Hongkong,  
Beijing  
Seoul, Tokyo  
Adelaide  
To change a displayed time zone or location, or to view the time  
and date in a particular time zone or location, do the following:  
1. In the World Time screen, highlight the location you wish to  
change.  
2. Press the Edit soft key.  
109  
     
Calculator  
Guam, Sydney  
Okhotsk  
Wellington,  
Auckland  
You can perform calculations, including addition, subtraction,  
multiplication and division using your phone.  
Samoa, Midway  
HAST/HADT :  
AKST/AKDT :  
Honolulu, Hawaii Alaska  
Note: You must use the phone keypad to use the Calculator.  
PST/PDT : Los  
Angeles, San  
Francisco  
MST/MDT :  
CST/CDT :  
Chicago, Dallas  
Denver, Phoenix  
1. From the Tools/Utilities menu, select Calculator. The  
Calculator appears in the display.  
4. Do one of the following:  
2. Enter the first number in your  
calculation using the keypad.  
(Numbers can be up to 15  
digits long, and can include a  
decimal point followed by up  
to 3 digits.)  
To set the displayed time zone as the default time zone for your  
phone, press the Home soft key, press the Yes soft key, then press  
or  
.
To set the displayed time zone as the default time zone for the  
second World Time clock, press or  
.
To return to the Tools/Utilities menu without changing the default  
time zone, press or  
.
To enter a decimal point, press  
.
Enable Daylight Saving Time (DST)  
1. Display the desired time zone.  
To change the sign for a number  
to a negative, press  
.
2. Press the DST Off / DST On soft key.  
To add parentheses [( )] to your calculation or to enter a Power  
exponent (^), such as, 3^2, which is the equivalent of 32, press the  
Operator soft key.  
3. To accept the highlighted setting, press  
or  
. The  
time zone abbreviation changes from ...ST to ...DT,  
indicating that Daylight Saving Time is enabled for the  
displayed time zone.  
Press the Clear soft key) to clear current entries.  
Tools/Utilities  
110  
     
3. Use the Navigation keys (as shown in the Calculator  
screen) to set the type of calculation that you wish to  
perform. Your choices are as follows.  
3. At the start of each succeeding event/lap, press the  
Record soft key to record the completion time for the  
previous event/lap. You can record up to eight event/lap  
times.  
[
[
[
[
+
x
] Addition  
] Multiplication  
4. To reset the stop watch and to erase all stop watch (lap)  
-
] Subtraction  
] Division  
times recorded, press the Reset soft key.  
÷
Converter  
The conversion menu provides the following conversion  
categories:  
4. Use the keypad to enter the second number into your  
equation.  
5. Press  
to perform the calculation and view the result.  
Currency  
Length  
Stop Watch  
You can use this function to set a  
stop watch.  
Weight  
Volume  
Area  
1. From the Tools/Utilities  
menu, select Stop Watch.  
The Stop Watch screen  
appears in the display.  
Temperature  
To convert a currency, length, weight, volume, area, or  
temperature, do the following:  
1. From the Tools/Utilities menu, select Converter. The  
2. To start, stop, and resume the  
following list of converters appears in the display:  
stopwatch count, press  
.
or  
• Currency  
• Length  
111  
   
• Weight  
2. Press the Rate soft key. The EXCHANGE RATE list appears  
• Volume  
in the display.  
• Area  
3. Press EDIT ( or  
). The EDIT EXCHANGE RATE list  
Temperature  
appears in the display.  
2. Select the conversion feature  
you wish to use.  
4. Highlight a currency whose  
exchange rate you wish to  
change.  
3. Use the Navigation/Arrow  
keys to select the units to be  
converted From and To.  
5. Use the keypad keys to  
change the selected exchange  
rate value.  
4. Enter the quantity you want  
converted in the From field.  
The converted quantity  
6. To save the changed exchange  
rate, press OK  
(
or  
).  
appears in the To field.  
The EXCHANGE RATE list appears in the display.  
To discard the change, press the Cancel soft key.  
Note: To include a decimal point, press the  
key.  
7. To change any other exchange rates, repeat Steps 3 – 6.  
Currency — Reviewing/Editing Exchange Rates  
8. To return to the Converter screen, press or  
.
The Currency Converter includes long-term average exchange  
rates as default values. To review and/or change a default  
exchange rate to the current exchange rate, do the following:  
Currency — Adding Exchange Rates  
You can use the Currency Converter to convert from and to  
obscure currencies by adding exchange rates for these  
1. From the Tools/Utilities menu, select Converter ➔  
Currency.  
Tools/Utilities  
112  
currencies. To add a currency and its exchange rate to the  
Currency Converter, do the following:  
Note: Press the  
key to enter the decimal point.  
The Exchange Rate field only accepts up to five digits after the  
decimal point.  
1. From the Tools/Utilities menu, select Converter ➔  
Currency.  
7. Press SAVE  
(
or  
) to save the new exchange rate.  
2. Press the Rate soft key. The EXCHANGE RATE list for the  
Currency — Erasing Exchange Rates  
From currency appears in the display.  
You cannot erase the preloaded currencies from the Exchange  
Rate list. You can erase a currency that you have added to the list  
by doing the following:  
3. Press the Add soft key. The  
ADD EXCHANGE RATE screen  
appears in the display with the  
Base field highlighted.  
1. From the Tools/Utilities menu, select Converter ➔  
Currency.  
4. Use the Left and Right  
navigation/arrow keys to  
select the Base currency to be  
converted from.  
2. Press the Rate soft key. The EXCHANGE RATE list for the  
From currency appears in the display.  
3. Use the Up and Down navigation keys to highlight the user-  
added currency exchange rate to be erased.  
5. Highlight the Currency field, and enter an identifier of up  
to 5 characters for the new currency using either keypad.  
4. Press the Erase soft key. You are prompted to confirm the  
erasure.  
Note: The Erase soft key is undefined for preloaded Exchange Rates. This  
prevents you from erasing them.  
6. Highlight the Exchange Rate field, and enter a decimal  
exchange rate for the new currency using either keypad.  
113  
5. To erase the selected exchange rate, press the Yes soft  
key. To keep selected exchange rate, press the No soft  
key.  
5. The amount of the Tip, the final Total, and the amount Each  
person should pay appear in the lower half of the screen.  
Tip Calculator  
Tip Calculator automatically calculates the following amounts:  
Gratuity (tip)  
Individual payment (for groups)  
Calculations are based on the total amount of the check, a  
selected gratuity percentage, and the number of people paying.  
1. From the Tools/Utilities menu, select Tip Calculator. The  
Tip Calculator screen appears in screen, with the Bill field  
highlighted.  
2. Use the keypad to enter the  
total amount of the bill.  
3. If needed, highlight the Tip  
field, and enter a tip  
percentage.  
4. If needed, highlight the #  
Paying field, and enter the  
number of persons paying.  
Tools/Utilities  
114  
 
Section 15: Settings  
This section explains how to configure your phone’s language,  
network preferences, security options, and other settings.  
2. Select the desired setting. The Settings menu appears in  
your display.  
Accessing Your Phone’s Settings  
To launch the Settings menu:  
Display Settings  
Display settings let you change your phone’s menu appearance,  
display brightness and contrast, and display content to better  
meet your needs.  
In standby mode, press the Menu soft key, then select  
Settings.  
1. From the Settings menu, select Display Settings. The  
The Settings menu appears in the display.  
following menus appear in the display:  
Location Setting  
You can set your phone to pass Global Positioning System (GPS)  
data to identify your location to the network continually or only  
when you make an emergency (911) call.  
Wallpaper — Choose the images that appear as background in  
the Main display on your phone while in standby mode.  
Backlight — Set backlight options for the Main Display, Keypad,  
backlight Brightness, and Charging.  
2. Select the desired sub-menu. The following sections  
Note: Check with your Wireless Carrier to determine if/when/where location-  
based services are available.  
describe the Display sub-menus in greater detail.  
Wallpaper  
1. From the Settings menu, select Location. The following  
Location options appear in the display:  
Wallpaper lets you choose images that appear in the background  
on your phone’s Main display while in standby mode.  
Location On — Your location data is continually sent wherever the  
feature is available.  
1. From the Settings menu, select Display Settings ➔  
911 Only — Your location data is sent only when you dial 911.  
Wallpaper.  
115  
                 
The following options appear:  
Keypad — Sets the amount of time the keypad backlight remains  
on after a period of inactivity. Optional settings are: 7 seconds 15  
seconds 30 seconds Always On, and Always Off  
,
My Images — Lets you select an image that you’ve downloaded  
or a picture you’ve taken with the camera.  
,
,
.
• Charging — Sets the amount of time the display backlight remains  
on while the battery is charging. Optional settings are: 7 seconds  
15 seconds 30 seconds Always On, and Always Off  
Preset Images — Lets you select an image that came preloaded  
with your phone.  
,
,
,
.
2. Select the image type you wish to use. A list of images  
Brightness — Use the Left and Right navigation keys to select  
between any of 6 optional settings.  
appears in the display.  
2. Use the Up and Down navigation keys to highlight the  
desired sub-menu and press the key.  
3. Use the navigation keys to change settings as desired in  
3. Select the image you wish to use.  
Backlight  
You can set the backlight for your display or keypad to remain on  
for a specified period of time or remain on as long as the folder is  
open.  
the selected sub-menu, and press the  
selection.  
key to save your  
Sound Settings  
Note: Prolonged backlight use drains your battery faster.  
Sound Settings let you customize your phone’s audio properties,  
1. From the Settings menu, select Display Settings ➔  
such as ringers, keypad tones, alerts, start up melody, and more.  
Backlight.  
Volume  
The following sub-menus appear in the display:  
Use the Volume sub-menu to set the default volume for call  
ringers, message alerts, and alarms.  
Main Display — Sets the time the internal display backlight  
remains on after a period of inactivity. Optional settings are:  
seconds 15 seconds 30 seconds Always On, and Always  
Off  
7
1. From the Settings menu, select Sound Settings ➔  
,
,
,
Volume. The following options appear in the display:  
.
Settings  
116  
     
Msg Reminder  
Voice Calls — Lets you set your phone’s Vocie Calls ringer to be  
Off, to Vibrate, or to play a selected ringtone, melody, or sound at  
Low – High/Vibrate volume.  
2. Select a ringer type. The following ringtone/sounds  
galleries appear in the display:  
Messages — Lets you set your phone’s New Messages ringer to  
be Off, to Vibrate, or to play a selected ringtone, melody, or sound at  
Low – High/Vibrate volume.  
My Ringtones  
My Sounds  
Alarms — Lets you set your phone’s Alarms ringer to be Off, to  
Vibrate, or to play a selected ringtone, melody, or sound at Low –  
High/Vibrate volume.  
Note: Msg Reminder is an on/off toggle. To set a Msg Reminder, select Msg  
Reminder and choose On or Off, then press OK  
.
2. Select the desired option, then select the desired volume  
level (Ringer Off, Low, Low/Medium, Medium, Medium/  
High, or High) or vibrate mode (Vibrate, Vibrate/High).  
3. Select the desired gallery.  
4. Select the desired ringtone, melody, or sound file.  
Tip: To play each tone, melody, or sound file as you scroll through the list,  
Ringer Type  
press the Play soft key.  
You can assign ring tones and melodies for calls, alarms, and  
other alerts in the Ringer Type sub-menu.  
Alerts  
You can set your phone to sound an alert whenever you enter or  
leave your service area, connect or disconnect a call, and other  
options.  
1. From the Settings menu, select Sound Settings ➔  
Ringer Type. The following ringer types appear in the  
display:  
1. From the Settings menu, select Sound Settings ➔  
Voice Calls  
Messages  
Alerts. The following alerts appear in the display:  
Minute Beep — Sound an alert ten seconds before each elapsed  
minute of a call.  
Text Message  
Picture Message  
Voicemail  
Roaming — Sound an alert when you leave your home service  
area while on a call.  
117  
   
Call Connect — Sound an alert when you connect/disconnect a  
Call Settings  
The Call Settings sub-menu lets you set call options such as Auto  
Retry, Data rates for data calls, and more.  
call.  
Power On/Off — Play power on and power off melodies.  
• Charge Alert — Sound an alert when you connect the Travel  
Call Answer  
Adapter or when battery charging is complete.  
You can select a specific answer mode when you receive an  
incoming call. Your phone can be preset to answer when you do  
any of the following:  
2. Select the desired alert. The following options appear in  
the display:  
• On  
1. From the Settings menu, select Call Settings Call  
Answer. The following call answer options appear in the  
display:  
• Off  
3. Select active (On) or inactive (Off) for the selected alert.  
Key Tone  
Any Key — Pressing any key except  
,
, or  
answers a call.  
Lets you adjust the volume level and duration of the tones that  
the keypad generates when you press the keys.  
Send Key — Only pressing  
answers a call.  
2. Select the desired option.  
1. From the Settings menu, select Sound Settings Key  
Tone. The following options appear in the display:  
Call Alert  
Tone Level — Select the desired Keypad volume level (Off  
,
Low,  
Call Alert lets you select what sounds your phone plays to notify  
you of incoming calls.  
Low/Medium Medium Medium/High, or High).  
,
,
Tone Length — Select the desired DTMF Tones length as Normal  
or Long  
1. From the Settings menu, select Call Settings Call  
.
Alert. The following call alert options appear in the display:  
2. Select the desired option and setting.  
• Ring Only — Either the Voice Calls ringer or a Contact’s individual  
Ringtone plays.  
Settings  
118  
       
• Caller ID + Ring — Either the Voice Calls ringer or a Contact’s  
individual Ringtone plays while a voice reads “Call from” followed  
by the Caller ID or Contact’s name.  
Off  
Every 10 Seconds  
Every 30 Seconds  
Every 60 Seconds  
• Name Repeat — A voice repeatedly reads “Call from” followed by  
the Caller ID or Contact’s name.  
2. Select the desired setting.  
2. Select the desired option.  
TTY Mode  
Auto Answer  
Your phone is fully Teletypewriter (TTY)/Telecommunication  
Device for the Deaf (TDD) compatible. You connect TTY/TDD  
equipment to the headset connector on the top of your phone,  
behind the folder hinge.  
Auto Answer enables your phone to automatically answer calls  
after a period of time that you specify.  
1. From the Settings menu, select Call Settings Auto  
Answer. The following options appear in the display:  
Note: TTY Mode must be enabled (TTY Full selected) before you can use  
Off  
your phone with TTY/TDD equipment.  
After 1 Second  
After 3 Seconds  
After 5 Seconds  
1. From the Settings menu, select Call Settings TTY  
Mode. A message pops-up warning of possible headset  
and non-TTY accessory performance impairment when in  
TTY mode and prompting you to confirm that you want to  
enable/disable TTY Mode.  
2. Select the desired setting.  
Auto Retry  
Auto Retry automatically re-dials a number if there is no answer  
or the dialed party is busy. Depending upon your location, the  
number of times your phone redials a number may vary.  
To confirm you want to view/change the TTY Mode setting, press  
the Yes soft key.  
To keep the current TTY Mode setting, press the No soft key.  
1. From the Settings menu, select Call Settings Auto  
2. The following options appear in the display:  
Retry. The following options appear in the display:  
119  
     
TTY Full — Enables TTY mode while letting you hear and speak  
Phone Settings  
Airplane Mode  
with the other party.  
TTY + Talk — Enables TTY mode while letting you speak with the  
other party.  
When set to On, Airplane Mode disables all radio functions of  
your phone. This prevents you from making or receiving calls, but  
allows you to use other features (such as the camera and the  
Tools) safely in sensitive environments, such as on board an  
aircraft.  
TTY + Hear — Enables TTY mode while letting you hear the other  
party.  
TTY Off — Disables TTY mode.  
Note: The TTY Mode option has no effect on the phone’s earpiece,  
microphone, or speaker. When you select TTY Full, all currently  
enabled sound functions remain enabled.  
1. From the Settings menu, select Phone Settings ➔  
Airplane Mode. The following options appear in the  
display:  
3. Select the desired setting. If you select a setting other that  
On — Disables the radio transmitter and receiver and the  
Bluetooth interface in your phone.  
TTY Off, you’re returned to the previous menu and the TTY  
icon (  
) appears in the top of the display.  
Tip: If you need to make an emergency call with Airplane mode enabled, just  
dial the emergency number and press  
.
Hearing Aid Mode  
Your Samsung Messager II phone lets you select whether to  
operate with hearing aids.  
Off — Enables the radio transmitter and receiver in your phone.  
to return to the Phone Settings menu.  
Note: Press  
1. From the Settings menu, select Call Settings Hearing  
Aid Mode. The following options appear in the display:  
2. Select the desired setting. You are prompted to confirm  
On — Enables hearing aid support in your phone.  
your setting change.  
Off — Disables hearing aid support.  
3. To change to the new setting, press the Yes soft key. You  
2. Select the desired setting.  
are returned to standby mode.  
Settings  
120  
   
To discard the change and keep the original setting, press  
the No soft key. The Airplane Mode screen remains in the  
display.  
must unlock the phone to place calls (except to emergency and  
secret numbers).  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Language  
The “Enter Code” prompt appears in the display.  
The Language option changes the language of menus, sub-  
menus, and other user-interface features.  
2. Enter the four-digit lock code using the keypad.  
1. From the Settings menu, select Phone Settings ➔  
Note: The default lock code is the last four digits of your mobile phone  
Language.  
number.  
The following options appear in the display:  
The “Enter Code” prompt disappears and the Security  
English  
Español  
menu appears in the display.  
3. Select Lock Phone. The following options appear in the  
2. Select your language preference.  
display:  
Security  
Lock — The phone locks immediately and stays locked until you  
enter the lock code.  
Use the Security sub-menu to lock your phone, set up emergency  
numbers, set restrictions, and other security options.  
Unlock — The phone remains unlocked.  
Lock Phone  
On Power Up — The phone locks automatically the next time your  
phone is powered on and stays locked until you enter the lock code.  
Locking the phone blocks all outgoing calls except those to 911  
and to the three user-programmed emergency numbers. You can  
lock the phone manually, or set the phone to lock automatically  
when turned on. In Lock mode, you can answer calls, but you  
4. Select the Lock Phone option of your choice.  
121  
       
Change Lock  
Emergency #  
The default lock code is generally the last four digits of your  
phone number. It is advisable to change the default lock code to a  
secret code for security purposes.  
You have the option of storing up to three emergency numbers to  
your phone. Each number can be up to 32 digits in length. All  
emergency numbers can be dialed any time, even when your  
phone is locked or restricted.  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Note: Emergency number 911 is hard-coded into your phone. You can dial  
this number any time, even when the phone is locked or restricted. If  
you call 911 an audible tone is heard and an Emergency prompt  
appears in the display for the duration of the call.  
The “Enter Code” prompt appears in the display.  
2. Enter the four-digit lock code using the keypad.  
Note: The default lock code is the last four digits of your mobile phone  
Important!: Because of various transmission methods, network parameters,  
and user settings used to complete a call from your wireless  
phone, a connection cannot always be guaranteed. Therefore,  
emergency calling may not be available on all wireless networks  
at all times.  
number.  
3. Select Change Lock.  
The “New Lock Code” prompt appears in the display.  
4. Enter the New Lock Code. You’re prompted to re-enter the  
Important!: DO NOT depend on this phone as a primary method of calling  
911 or for essential or emergency calls.  
New Lock Code for verification.  
5. Enter the new lock code again. Your changes are stored.  
Remember to always turn your phone on and check for adequate  
signal strength before placing a call.  
Note: Your phone does not allow you to view the lock code for obvious  
security reasons. If you change the lock code, be sure to write down or  
memorize the new code.  
Note: When you dial an emergency number, you phone locks itself to the  
emergency location that answered the call and locks itself in 911-Only  
mode, blocking from dialing any number but an emergency number.  
Store Emergency Numbers  
Settings  
122  
       
Reset Phone  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Reset Phone returns all setup parameters (except for the  
Contacts entries) to their factory default values.  
The “Enter Code” prompt appears in the display.  
2. Enter the four-digit lock code using the keypad.  
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.  
Invoking Reset Phone may erase settings made by your Wireless  
Carrier from your phone, resulting in loss of service.  
Note: The default lock code is the last four digits of your mobile phone  
number.  
1. From the Settings menu, select Phone Settings ➔  
The “Enter Code” prompt disappears and the Security  
Security.  
menu appears in the display.  
The “Enter Code” prompt appears in the display.  
3. Select Emergency #.  
2. Enter the four-digit lock code using the keypad.  
4. Select one of the three emergency numbers.  
5. Enter the emergency number (up to 32 digits in length).  
Note: The default lock code is the last four digits of your mobile phone  
number.  
6. To save the number that you entered, press OK  
(
or  
The “Enter Code” prompt disappears and the Security  
).  
menu appears in the display.  
7. To discard your entry and return to the previous menu,  
3. Select Reset Phone. A prompt appears in the display to  
press the Cancel soft key.  
restore default settings (except for Contacts).  
Call Emergency Numbers in Lock Mode  
1. In standby mode, enter the emergency number using  
either keypad.  
4. To reset your phone to factory default settings, press the  
Yes soft key.  
To keep the current settings, press the No soft key.  
2. Press  
123  
to place the call.  
   
Erase All Entries  
The “Enter Code” prompt appears in the display.  
Erase All Entries deletes all entries from the Contacts list.  
1. From the Settings menu, select Phone Settings ➔  
Security.  
2. Enter the four-digit lock code using the keypad.  
Note: The default lock code is the last four digits of your mobile phone  
number.  
The “Enter Code” prompt appears in the display.  
The “Enter Code” prompt disappears and the Security  
2. Enter the four-digit lock code using the keypad.  
menu appears in the display.  
3. Select Restriction. The following options appear in the  
Note: The default lock code is the last four digits of your mobile phone  
number.  
display:  
• Outgoing — Restrict/allow outgoing calls.  
• Incoming — Restrict/allow incoming calls.  
The “Enter Code” prompt disappears and the Security  
menu appears in the display.  
• Contacts — Restrict/allow access to your Contacts list.  
4. Select the desired option and select the desired setting [On  
(restricted) / Off (unrestricted)].  
3. Select Erase All Entries.  
The “Erase all entries?” prompt appears in the display.  
4. To reset your Contacts list, press the Yes soft key.  
To keep the current Contacts entries, press the No soft key.  
Restriction  
Note: The default restriction settings are all Off.  
System Select  
The System Select feature enables you to automatically or  
manually select the network used when roaming outside of your  
home area.  
Restriction lets you restrict the use of your phone for outgoing  
calls, incoming calls, and calls placed by/to your Contacts.  
1. From the Settings menu, select Phone Settings ➔  
Security.  
Settings  
124  
     
1. From the Settings menu, select Phone Settings ➔  
Set Time  
Set Date  
System Select.  
2. Select Set Time. The Set Time screen appears in the  
The following roaming options appear in the display:  
display.  
Home only — Roaming is OFF. If your home system is not  
available then your call will not be connected, and the no service  
3. Enter the current time using your keypad:  
icon (  
) appears in the display. In some service areas, an  
The hour and minute must be entered using two digits each. You  
must enter the hour in 12-hour format.  
operator may come on-line and ask you how you would prefer to  
pay for the call.  
Use the Left and Right navigation keys to select am or pm  
or ) to save the time. The following  
options appear in the display:  
.
Automatic — Roaming is ON. It will always try your calls using the  
Preferred Roaming List (PRL) loaded into your phone. If a preferred  
service is not found, then this option will attempt to acquire any  
digital service.  
4. Press OK  
(
Set Time  
Set Date  
2. Select the desired Roam setting.  
The Phone Settings menu appears in the display.  
5. Select Set Date. The Set Date screen appears in the  
Set Time  
display.  
Use the Set Time option to set the current time and date.  
6. Enter the current date using your keypad:  
The month and day must be entered using two digits each.  
The year must be entered with all four digits.  
Note: In digital service mode, the Set Time feature is disabled. The network  
adjusts time and date automatically.  
With Airplane Mode set to On, the Set Time feature is enabled.  
7. Press OK  
(
or  
) to save the date.  
Quick Search  
1. From the Settings menu, select Phone Settings Set  
Quick Search is an easy way to locate Contacts and Menu  
Time. The following options appear in the display:  
options.  
125  
   
Searching for a Menu Item  
1. From the Settings menu, select Phone Settings Quick  
Search.  
1. In standby mode, press the first few numeric keys that  
correspond to the letters of the Menu option name.  
The following options appear in the display:  
For example, to search for “Inbox” you would enter  
On  
Off  
2. Select the desired option.  
I
N
B
Searching for a Contact  
1. In standby mode, press the first few numeric keys that  
correspond to the letters of the contact’s name.  
2. Press the Navigation key Down. The Menu List screen  
appears in the display with the first matching menu option  
highlighted.  
For example, to search for “Sally” you would enter  
3. Select the desired menu option.  
PC Connection  
S
A
L
PC Connection lets you allow or block PC connections to your  
phone, using an optional USB Data Cable.  
2. Press the Navigation key Up. The Contacts Find screen  
appears in the display with the first matching contact  
name in a list highlighted.  
1. From the Settings menu, select Phone Settings ➔  
PC Connection. The following settings appear in the  
display:  
3. Highlight the desired Contact and press  
to call the  
• USB Mass Storage — Your phone appears as a removable disk  
drive to your PC, allowing you to transfer files (such as, music or  
text files) to and from your phone.  
contact.  
Settings  
126  
• No Connection — Blocks connection and file transfers with a PC.  
Memory Info  
2. Select the desired setting.  
Memory Info shows the amount of phone memory that is  
available and used, and details the distribution of the used  
memory.  
Auto Key Lock  
With Auto Key Lock set to On, your phone automatically disables  
its keys when the screen backlight goes out with the phone  
closed.  
Save Options  
1. From the Settings menu, select Memory Info ➔  
Save Options Images / Videos. The following options  
appear in the display:  
1. From the Settings menu, select Phone Settings ➔  
Auto Key Lock. The following settings appear in the  
display:  
• Phone Memory — Stores pictures taken with your phone’s  
camera in the phone’s memory.  
On  
Off  
• Card Memory — Stores pictures taken with your phone’s camera  
in an optional microSD™ Memory Card.  
2. Select the desired option.  
2. Select the desired setting.  
To unlock the keys:  
Phone Memory  
1. From the Settings menu, select Memory Info ➔  
Phone Memory.  
1. Open the QWERTY keypad,  
– Or –  
Turn the screen backlight on by pressing any key.  
The following options appear in the display:  
2. Press the Unlock soft key. “Press * to unlock” pops-up in  
Memory Usage — Shows Total phone memory, total memory  
Available, and memory quantities used to store Images, Ringtones,  
Sounds, Applications, and Picture messages.  
the display.  
3. Press  
.
127  
         
My Images — Lists the photos stored in the My Images folder.  
Lets you copy photos to an optional Memory Card or lets you make  
used memory available by erasing unwanted photos or by moving  
photos to an optional Memory Card.  
Press the Done soft key. You are prompted to confirm the  
erasure(s)/move(s).  
To erase/move/copy the selected file(s), press the Yes soft key.  
To keep the selected file(s), press the No soft key.  
My Videos — Lists the videos stored in the My Videos folder. Lets  
you copy Videos to an optional Memory Card or lets you make used  
memory available by erasing unwanted videos or by moving videos  
to an optional Memory Card.  
Card Memory  
1. From the Settings menu, select Memory Info ➔  
Card Memory. The following options appear in the display:  
My Ringtones — Lists the downloaded ringtones stored in the My  
Ringtones folder. Lets you make used memory available by erasing  
unwanted recorded sounds.  
Memory Usage — Shows Total phone memory, total memory  
Available, and memory quantities used to store Images and Music.  
My Images — Lists the photos stored in the My Images folder.  
Lets you copy photos to phone memory or lets you make used card  
memory available by erasing unwanted photos or by moving photos  
to phone memory.  
My Sounds — Lists the recorded sounds stored in the My Sounds  
folder. Lets you make used memory available by erasing unwanted  
recorded sounds.  
2. Select the desired option.  
My Videos — Lists the videos stored in the My Images folder. Lets  
you copy videos to phone memory or lets you make used card  
memory available by erasing unwanted videos or by moving videos  
to phone memory.  
3. To delete/move selected photos, downloaded ringtones, or  
recorded sounds:  
Select My Images  
,
My Videos  
,
My Ringtones, or My Sounds  
.
My Music — Lists the downloaded Music files stored in the My  
Music folder. Lets you make used card memory available by  
erasing unwanted Music files.  
Press the Options soft key, then select Erase  
,
Move, or Copy. The  
selected Erase or Move/Copy (to an optional Memory Card) screen  
appears in the display.  
My Ringtones — Lists the downloaded ringtones stored in the My  
Ringtones folder. Lets you make used memory available by erasing  
unwanted recorded sounds.  
Mark individual files by highlighting each file, then pressing MARK  
(
or  
); or mark all files by pressing the Options soft key,  
then selecting Mark All  
.
Settings  
128  
 
Formatting a Memory Card  
My Sounds — Lists the recorded sounds stored in the My Sounds  
folder. Lets you make used memory available by erasing unwanted  
recorded sounds.  
1. Insert an optional microSD™ Memory Card into your  
Format Card — Erases the current contents of the optional  
Memory Card (if any) and replaces it with a set of folders needed by  
your phone.  
2. From the Settings menu, select Memory Info Card  
Memory Format Card. You are prompted to confirm that  
you want to format the Memory Card.  
Note: This option prepares new, unformatted microSD™ Memory Cards for  
use with your phone. Repeated formatting of a Memory Card can  
shorten its service life. Erase files rather than format the Memory Card.  
3. To format the Memory Card, press the Yes soft key.  
2. Select the desired option.  
4. To return to the Card Memory menu without formating the  
3. To delete/move selected photos, videos, or downloaded  
Memory Card, press the No soft key.  
ringtones:  
Phone Info  
Select My Images  
,
My Videos  
,
My Music  
,
My Ringtones, or My  
Move, or Copy. The  
Phone Info lets you identify the hardware and software versions  
of your phone and to identify the phone number assigned to your  
phone.  
Sounds  
.
Press the Options soft key, then select Erase  
selected Erase or Move/Copy (to phone memory) screen appears in  
the display.  
,
Phone Number  
Mark individual files by highlighting each file, then pressing MARK  
This option causes the Phone Number screen to appear in the  
display and show the ten-digit number assigned to your phone by  
your Wireless Carrier.  
(
or  
); or mark all files by pressing the Options soft key,  
then selecting Mark All  
.
Press the Done soft key. You are prompted to confirm the  
erasure(s)/move(s).  
1. From the Settings menu, select Phone Info Phone  
Number. The phone number assigned by your Wireless  
Carrier appears in the display.  
To erase/move/copy the selected file(s), press the Yes soft key.  
To keep the selected file(s), press the No soft key.  
129  
     
2. Press OK  
(
or  
) to return to the Phone Info menu.  
ESN / MEID  
Lists the ESN and MEID number for your phone in decimal (Dec)  
and hexadecimal (Hex) formats.  
Icon Glossary  
This option causes the ICON GLOSSARY list to appear in the  
display and show the icons that can appear in the display and the  
names of the icons.  
1. From the Settings menu, select Phone Info ESN /  
MEID.  
1. From the Settings menu, select Phone Info Icon  
ESN Dec  
,
ESN Hex, MEID Dec and MEID Hex numbers for  
Glossary.  
your phone appear in the display.  
A list of the icons that can appear on the top line of the  
display shows in the display.  
2. Press the OK  
(
or  
) key to return to the Phone Info  
menu.  
2. Press OK  
(
or  
) to return to the Phone Info menu.  
Warranty Date Code  
Version  
Displays the Warranty Date Code for your phone.  
1. From the Settings menu, select Phone Info Warranty  
Date Code.  
You can view the PRL (Preferred Roaming List), ERI (Extended  
Roaming Indicator), software version, Browser version, Games &  
Apps version, and hardware version on your phone. This feature  
is helpful if you need to contact Customer Service.  
The Warranty Date Code for your phone appears in the  
display.  
1. From the Settings menu, select Phone Info Version.  
2. Press the OK  
(
or  
) key to return to the Phone Info  
Hardware and software information for your phone  
appears in the display.  
menu.  
Refurbish  
2. Press the OK  
(
or  
) key to return to the Phone Info  
Displays the Refurbish Counter for your phone.  
menu.  
1. From the Settings menu, select Phone Info Refurbish.  
Settings  
130  
         
The Refurbish Counter for your phone appears in the  
display.  
2. Press the OK  
(
or  
) key to return to the Phone Info  
menu.  
131  
Section 16: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. These safety precautions should be followed to  
safely use your phone.  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations, the National  
Counsel on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
For body worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
Health and Safety Information  
132  
       
contains no metal and that positions the handset a minimum of  
1.5 cm from the body.  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile phones and genuine  
Samsung accessories.  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
information.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines.  
Head: 1.10 W/Kg.  
Body-worn: 1.33 W/Kg.  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD  
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY  
DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE  
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER  
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS  
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
133  
     
Do wireless phones pose a health hazard?  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a  
series of Questions and Answers for consumers relating to radio  
frequency (RF) exposure from wireless phones. The FDA  
publication includes the following information:  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe.  
Wireless phones emit low levels of radio frequency energy (RF) in  
the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode. Whereas high levels of  
RF can produce health effects (by heating tissue), exposure to  
low level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies  
have suggested that some biological effects may occur, but such  
findings have not been confirmed by additional research. In some  
cases, other researchers have had difficulty in reproducing those  
studies, or in determining the reasons for inconsistent results.  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless  
phones with built-in antennas, often called "cell," "mobile," or  
"PCS" phones. These types of wireless phones can expose the  
user to measurable radio frequency energy (RF) because of the  
short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission  
safety guidelines that were developed with the advice of FDA and  
other federal health and safety agencies.  
When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF  
exposure decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-  
emitting consumer products such as wireless phones before they  
can be sold, as it does with new drugs or medical devices.  
However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level  
that is hazardous to the user. In such a case, FDA could require  
the manufacturers of wireless phones to notify users of the  
Health and Safety Information  
134  
 
health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that  
are sold in the United States must comply with FCC safety  
guidelines that limit RF exposure. FCC relies on FDA and other  
health agencies for safety questions about wireless phones.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a  
number of steps, including the following:  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF  
exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless  
phones.  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to  
the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human  
health.  
Base stations are thus not the primary subject of the safety  
questions discussed in this document.  
FDA belongs to an interagency working group of the federal  
agencies that have responsibility for different aspects of RF  
safety to ensure coordinated efforts at the federal level. The  
following agencies belong to this working group:  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research  
methods. Animal experiments investigating the effects of radio  
frequency energy (RF) exposures characteristic of wireless  
phones have yielded conflicting results that often cannot be  
repeated in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of  
the studies that showed increased tumor development used  
animals that had been genetically engineered or treated with  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
135  
cancer-causing chemicals so as to be pre-disposed to develop  
cancer in absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
phones, so we don't know with certainty what the results of such  
studies mean for human health.  
provide data that is directly applicable to human populations, but  
ten or more years' follow-up may be needed to provide answers  
about some health effects, such as cancer.  
This is because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if they do -  
may be many, many years. The interpretation of epidemiological  
studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any  
possible association between the use of wireless phones and  
primary brain cancer, glioma, meningioma, or acoustic neuroma,  
tumors of the brain or salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and  
with groups of investigators around the world to ensure that high  
priority animal studies are conducted to address important  
questions about the effects of exposure to radio frequency  
energy (RF).  
However, none of the studies can answer questions about long-  
term exposures, since the average period of phone use in these  
studies was around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs  
that has driven the establishment of new research programs  
around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
A combination of laboratory studies and epidemiological studies  
of people actually using wireless phones would provide some of  
the data that are needed. Lifetime animal exposure studies could  
be completed in a few years. However, very large numbers of  
animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists. Epidemiological studies can  
Health and Safety Information  
136  
FDA and Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations.  
away from your body or use a wireless phone connected to a remote  
antenna.  
Again, the scientific data do not demonstrate that wireless  
phones are harmful. But if you are concerned about the RF  
exposure from these products, you can use measures like those  
described above to reduce your RF exposure from wireless phone  
use.  
CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The  
CRADA will also include a broad assessment of additional  
research needs in the context of the latest research  
developments around the world.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of  
wireless phones, including children and teenagers. If you want to  
take steps to lower exposure to radio frequency energy (RF), the  
measures described above would apply to children and  
teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the  
RF source will reduce RF exposure.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not  
know that there is - it is probably very small. But if you are  
concerned about avoiding even potential risks, you can take a  
few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a  
wireless phone will reduce RF exposure.  
Some groups sponsored by other national governments have  
advised that children be discouraged from using wireless phones  
at all. For example, the government in the United Kingdom  
distributed leaflets containing such a recommendation in  
December 2000.  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the source  
of the RF, since the exposure level drops off dramatically with distance.  
For example, you could use a headset and carry the wireless phone  
They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to  
limit wireless phone use by children was strictly precautionary; it  
137  
was not based on scientific evidence that any health hazard  
exists.  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields"  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption. In February 2002, the Federal trade  
Commission (FTC) charged two companies that sold devices that  
claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims.  
Do hands-free kits for wireless phones reduce risks from  
exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that hands-  
free kits reduce risks. Hands-free kits can be used with wireless  
phones for convenience and comfort. These systems reduce the  
absorption of RF energy in the head because the phone, which is  
the source of the RF emissions, will not be placed against the  
head. On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in  
the U.S. are required to meet safety requirements regardless of  
whether they are used against the head or against the body.  
Either configuration should result in compliance with the safety  
limit.  
According to FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
What about wireless phone interference with medical  
equipment?  
Radio frequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped  
develop a detailed test method to measure electromagnetic  
interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now  
part of a standard sponsored by the Association for the  
Do wireless phone accessories that claim to shield the  
head from RF radiation work?  
Advancement of Medical instrumentation (AAMI). The final draft,  
a joint effort by FDA, medical device manufacturers, and many  
other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI. FDA has tested  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that  
accessories that claim to shield the head from those emissions  
reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
Health and Safety Information  
138  
wireless phones and helped develop a voluntary standard  
sponsored by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and performance  
requirements for hearing aids and wireless phones so that no  
interference occurs when a person uses a compatible phone and  
a compatible hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
International Commission on Non-Ionizing Radiation Protection:  
Health Protection Agency:  
US Food and Drug Administration:  
Road Safety  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful  
interference be found to occur, FDA will conduct testing to assess  
the interference and work to resolve the problem.  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of wireless  
phones, one that every user must uphold.  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(Updated 12/9/2008):  
When driving a car, driving is your first responsibility. When using  
your wireless phone behind the wheel of a car, practice good  
common sense and remember the following tips:  
FCC RF Safety Program:  
1. Get to know your wireless phone and its features, such as  
speed dial and redial. If available, these features help you  
to place your call without taking your attention off the road.  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
139  
 
3. Position your wireless phone within easy reach. Be able to  
access your wireless phone without removing your eyes  
from the road. If you get an incoming call at an  
7. Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with  
aware you are driving and suspend conversations that  
have the potential to divert your attention from the road.  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving;  
if necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice and even heavy  
traffic can be hazardous.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other  
local emergency number in the case of fire, traffic accident  
or medical emergencies.  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or  
other local emergency number, as you would want others  
to do for you.  
5. Do not take notes or look up phone numbers while driving.  
Jotting down a "to do" list or flipping through your address  
book takes attention away from your primary  
responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls  
when you are not moving or before pulling into traffic. Try  
to plan calls when your car will be stationary. If you need to  
make a call while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one  
appears injured, or a vehicle you know to be stolen, call  
roadside assistance or other special non-emergency  
number.  
Health and Safety Information  
140  
"The wireless industry reminds you to use your phone safely when  
driving."  
Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of  
sound produced by a portable audio device varies depending on  
the nature of the sound, the device settings, and the headphones  
that are used. As a result, there is no single volume setting that is  
appropriate for everyone or for every combination of sound,  
settings and equipment.  
For more information, please call 1-888-901-SAFE, or visit our  
.
Important!: If you are using a handset other than a standard numeric keypad,  
please call 1-888-901-7233.  
You should follow some commonsense recommendations when  
using any portable audio device:  
Provided by the Cellular Telecommunications & Internet  
Association.  
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
Responsible Listening  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations. Prolonged exposure to  
loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that  
using portable audio devices, such as portable music players and  
cellular telephones, at high volume settings for long durations  
may lead to permanent noise-induced hearing loss. This includes  
the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound  
has also been associated in some studies with tinnitus (a ringing  
in the ear), hypersensitivity to sound and distorted hearing.  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
141  
   
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
National Institute on Deafness and Other Communication  
Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
You can obtain additional information on this subject from the  
following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Health and Safety Information  
142  
When connecting the phone or any accessory to another device,  
read its user's guide for detailed safety instructions. Do not  
connect incompatible products.  
National Institute for Occupational Safety and Health  
(NIOSH)  
395 E Street, S.W.  
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating position  
(held to your ear with the antenna pointing over your shoulder if  
you are using an external antenna).  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
1-888-232-6348 TTY  
UsingYourPhoneNearOtherElectronicDevices  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone. Consult the manufacturer to discuss alternatives.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless phone and an implantable medical  
device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch your phone off whenever it is forbidden to use  
it, or when it may cause interference or danger.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their  
implantable medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
143  
     
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Should turn the phone OFF immediately if there is any reason to  
suspect that interference is taking place;  
The wireless telephone industry has developed a rating system  
for wireless phones, to assist hearing device users find phones  
that may be compatible with their hearing devices. Not all phones  
have been rated. Phones that are rated have the rating on their  
box or a label located on the box.  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless phone with such a device, consult your health care  
provider.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
For more information see:  
FCC Hearing-Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless phones under the Hearing Aid Compatibility  
Act of 1988 (HAC Act) to require digital wireless phones be  
compatible with hearing-aids.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to generate less interference to hearing devices than  
phones that are not labeled. T4 is the better/higher of the two  
ratings.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities.  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a  
buzzing, humming, or whining noise. Some hearing devices are  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
Health and Safety Information  
144  
       
relatively immune to interference noise. The hearing aid and  
wireless phone rating values are then added together. A sum of 5  
is considered acceptable for normal use. A sum of 6 is  
considered for best use.  
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your phone off in  
health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
Vehicles  
In the above example, if a hearing aid meets the M2 level rating  
and the wireless phone meets the M3 level rating, the sum of the  
two values equal M5. This is synonymous for T ratings. This  
should provide the hearing aid user with "normal usage" while  
using their hearing aid with the particular wireless phone.  
"Normal usage" in this context is defined as a signal quality that  
is acceptable for normal operation.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require  
you to do so.  
The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M  
and T marks are recommended by the Alliance for  
Telecommunications Industries Solutions (ATIS). The U and UT  
marks are referenced in Section 20.19 of the FCC Rules.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
145  
   
in such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Users are advised to switch the phone off while at a refueling  
point (service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your phone may be the only means of communication at the  
scene of an accident; do not cut off the call until given  
permission to do so.  
Emergency Calls  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee connection in all  
conditions. Therefore, you should never rely solely on any  
wireless phone for essential communications (medical  
emergencies, for example).  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play  
with it because they could hurt themselves and others, damage  
the phone or make calls that increase your phone bill.  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
Health and Safety Information  
146  
 
phone warranty if said accessories cause damage or a defect to  
the phone.  
FCC Notice and Cautions  
FCC Notice  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
The phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to  
stop using the phone if such interference cannot be eliminated.  
Other Important Safety Information  
Vehicles using liquefied petroleum gas (such as propane or  
butane) must comply with the National Fire Protection Standard  
(NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association:  
Only qualified personnel should service the phone or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
NFPA (National Fire Protection Agency)  
1 Batterymarch Park  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
Quincy, Massachusetts  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both installed  
or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
USA 02169-7471  
Cautions  
Switch your phone off before boarding an aircraft. The use of wireless  
phone in aircraft is illegal and may be dangerous to the aircraft's  
operation.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
147  
   
Maintaining Your Phone's Peak Performance  
Product Performance  
Getting the Most Out of Your Signal Reception  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Faulty service may void the  
warranty.  
The quality of each call you make or receive depends on the  
signal strength in your area. Your phone informs you of the  
current signal strength by displaying a number of bars next to the  
signal strength icon. The more bars displayed, the stronger the  
signal.  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
To ensure that the Hearing Aid Compatibility rating for your phone is  
maintained, secondary transmitters such as Bluetooth and WLAN  
components must be disabled during a call. For more information,  
refer to the “Disabling Bluetooth or WLAN” section.  
If you're inside a building, being near a window may give you  
better reception.  
Understanding the Power Save Feature  
If your phone is equipped with an external antenna, hold the phone  
with the antenna raised, fully-extended and over your shoulder.  
If your phone is unable to find a signal after searching, a Power  
Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability or you can check it  
yourself by pressing any key.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the  
internal antenna could inhibit call performance.  
Anytime the Power Save feature is activated, a message displays  
on the screen. When a signal is found, your phone returns to  
standby mode.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it is inoperable, call Customer Care for service.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's  
turned on, it receives and transmits radio frequency (RF) signals.  
When you use your phone, the system handling your call controls  
the power level. This power can range from 0.006 watts to 0.2  
watts in digital mode.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may  
require additional subscription and/or usage charges. Not all  
Health and Safety Information  
148  
   
features are available for purchase or use in all areas.  
Downloadable Ring Tones may be available at an additional cost.  
Other conditions and restrictions may apply. See your service  
provider for additional information.  
Battery charging time depends on the remaining battery charge and  
the type of battery and charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
Battery Standby and Talk Time  
If left unused, a fully charged battery will discharge itself over time.  
Standby and talk times will vary depending on phone usage  
patterns and conditions. Battery power consumption depends on  
factors such as network configuration, signal strength, operating  
temperature, features selected, frequency of calls, and voice,  
data, and other application usage patterns.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave the battery  
connected to a charger for more than a week, since overcharging may  
shorten its life.  
Battery Precautions  
Do not use incompatible cell phone batteries and chargers. Some Web  
sites and second-hand dealers, not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you  
suspect damage to the phone or battery, take it to a service center for  
inspection.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in  
serious safety hazards.  
Misuse or use of incompatible phones, batteries, and charging devices  
could result in damage to the equipment and a possible risk of fire,  
explosion, leakage, or other serious hazard.  
If you use the phone near the network's base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Extreme temperatures will affect the charging capacity of your battery:  
it may require cooling or warming first.  
Follow battery usage, storage and charging guidelines found in the  
user’s guide.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
149  
   
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily not  
work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will help  
you fulfill any warranty obligations and allow you to enjoy this  
product for many years.  
0 °C (32 °F).  
Do not place the phone in areas that may get very hot, such as on or  
near a cooking surface, cooking appliance, iron, or radiator.  
Keep the phone and all its parts and accessories out of the reach of  
small children.  
Do not get your phone or battery wet. Even though they will dry and  
appear to operate normally, the circuitry could slowly corrode and  
pose a safety hazard.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and - terminals of the battery (metal strips on the  
battery), for example when you carry a spare battery in a pocket or  
bag. Short-circuiting the terminals may damage the battery or the  
object causing the short-circuiting.  
Do not use or store the phone in dusty, dirty areas, as its moving parts  
may be damaged.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
Do not permit a battery out of the phone to come in contact with metal  
objects, such as coins, keys or jewelry.  
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone's electronic circuit boards.  
Do not crush, puncture or put a high degree of pressure on the battery  
as this can cause an internal short-circuit, resulting in overheating.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Dispose of used batteries in accordance with local regulations. In some  
areas, the disposal of batteries in household or business trash may be  
prohibited. For safe disposal options for Li-Ion batteries, contact your  
nearest Samsung authorized service center. Always recycle. Do not  
dispose of batteries in a fire.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Health and Safety Information  
150  
 
Do not paint the phone. Paint can clog the device's moving parts and  
prevent proper operation.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized antennas  
or modified accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
151  
Section 17: Warranty Information  
Standard Limited Warranty  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the original purchaser ("Purchaser") that SAMSUNG's  
Phones and accessories ("Products") are free from defects in  
material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
This Limited Warranty covers batteries only if battery capacity  
falls below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals on the  
battery are broken or show evidence of tampering, or (iii) the  
battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number  
What are SAMSUNG's Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG's sole  
option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
Warranty Information  
152  
       
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and  
the sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-  
4357. Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall  
become the property of SAMSUNG.  
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY  
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and  
labor charges for the repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED  
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND  
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
153  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO  
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY  
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR  
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY  
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
Warranty Information  
154  
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
End User License Agreement for Software  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
155  
 
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
shall cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge  
and agree that use of the Software is at your sole risk and that  
the entire risk as to satisfactory quality, performance, accuracy  
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND  
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND  
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS  
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)  
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH  
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF  
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS  
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,  
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,  
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG  
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR  
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS  
CONTAINED IN THE SOFTWARE WILL MEET YOUR  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
Warranty Information  
156  
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL  
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE  
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN  
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG  
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.  
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON  
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE  
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.  
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO  
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL  
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THIS LIMITATION MAY NOT APPLY TO YOU.  
11. LIMITATION OF LIABILITY. Notwithstanding any damages that  
you might incur for any reason whatsoever (including, without  
limitation, all damages referenced herein and all direct or general  
damages in contract or anything else), the entire liability of  
Samsung under any provision of this EULA and your exclusive  
remedy hereunder shall be limited to the greater of the actual  
damages you incur in reasonable reliance on the Software up to  
the amount actually paid by you for the Software or US$5.00. The  
foregoing limitations, exclusions and disclaimers (including  
Sections 9, 10 and 11) shall apply to the maximum extent  
permitted by applicable law, even if any remedy fails its essential  
purpose.  
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN  
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN  
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,  
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF  
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY  
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR  
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF  
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,  
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH  
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF  
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION  
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,  
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
157  
shall not be governed by the UN Convention on Contracts for the  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Phone: 1-888-987-HELP (4357)  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
©
2009 Samsung Telecommunications America. All rights  
reserved.  
Warranty Information  
158  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
159  
Index  
Low Battery Indicator 6  
Removal 5  
Travel Adapter 5  
TTY Mode 119  
Call Timer 29  
Call Waiting 26  
Caller ID 26  
Calls Menu 27  
Camcorder  
Color Effects 88  
Options 87  
Screen Icons 80  
Taking Videos 76  
Video Gallery 92  
Camera  
Numerics  
2-Sec Pause 44  
A
Browser  
Accessing Your Phone’s Settings 115  
Accessing Your Phone’s Tools 101  
Adding a New Contacts Entry  
Dial Method 42  
How Browser Keys Work 70  
Launching the Browser 69  
Using Links 70  
Using the Browser 69  
Menu Method 42  
Adjust  
Key Tone 118  
Ringer Setting 19  
Alarm Clock  
When an Alarm Sounds 108  
Alarm clock  
Turn Off the Alarm 108  
Alerts 117  
Auto Answer 119  
Auto Retry 119  
C
Calculator 110  
Calendar  
View an Event 104  
Call Answer 26, 118  
Call Answer Mode 16  
Call Block 26  
Brightness 91  
Options 82  
Photo Gallery 92  
Save Pictures 82  
Screen Icons 78  
Shooting Mode 82  
Taking Pictures 76  
Camera Mode 19  
Camera Options  
Size 83  
Call Functions  
Answering a Call 25  
Making a Call 21  
Call Notification Types 25  
Call Settings  
Auto Answer 119  
Auto Retry 119  
B
Backlight 116  
Battery 4  
Charging 5  
Call Answer 118  
160  
   
Canned Message Text  
Editing and Entering 65  
Change Lock 122  
Change Text Entry Modes 35  
Clear Key 14  
Contacts 39  
Add Pauses 44  
Adding 42  
Deleting 51  
Edit Name and Numbers 43  
Editing 43  
Erase All 124  
Finding 40  
Groups 49  
Memory Info 52  
Opening 39  
Saving Call Numbers 46  
Speed Dial 48  
Display Settings  
Backlight 116  
Wallpaper 115  
Draft Folder 61  
Draft Messages 61  
Getting Started  
Activating Your Phone 6  
Understanding this User Manual 4  
Voicemail 7  
Go Back One Menu 32  
GPS Setting 115  
H
E
Edit Contacts Name and Numbers 43  
Emergency 122  
Emergency #s in Lock Mode 123  
Emergency Numbers 122  
End Key 14  
HAC 144  
Hardware Version, Viewing 130  
Health and Safety Information 132  
I
Icon Glossary 130  
Icons  
Entering Text  
Entering Numbers 37  
Entering Symbols 38  
Using T9 Mode 36  
Erase All Entry 124  
Erase Logs 29  
Erase Messages 64  
Exit Browser 69  
G
Gallery  
Image 95  
Gallery, photo 92  
Gallery, video 92  
Number Type 42, 46, 47  
Ignore Calls 26  
Inbox Folder 59  
Incoming Calls 25  
Incoming Calls Menu 28  
Input Mode 16  
Create Messages 54  
D
L
Data Counter 30  
Data, View Counters 30  
Display 115  
Language 121  
Left Soft Key 13  
Lock Code, Changing 122  
Lock Mode 17  
Display Screen Icons 15  
Lock Phone 121  
161  
Receive in Call 55  
Types of Messages 54  
Messages and Lock Mode 60  
microSD  
Installing 8  
Removing 8  
Missed Calls Menu 28  
Mobile Shop  
Shopping and Downloading 53  
Mode  
Call Answer 16  
Camera 19  
Input 16  
Number Type Icons 42, 47  
O
M
MEID 130  
Memory Card  
Formatting 129  
Installing 8  
OK Key 14  
Outbox Folder 60  
Outbox, Reviewing Messages 60  
Outgoing 27  
Managment 128  
Removing 8  
P
Memory Info 127  
Memory Info Settings  
Card Memory 128  
Phone Memory 127  
Save Options 127  
Memory Management 127  
Message Folder  
Draft Box 61  
Pause Dial 22, 44  
Pauses, Adding 44  
Phone Info  
Icon Glossary 130  
MEID 130  
Phone Number 129  
Phone Number 129  
Phone Safety 143  
Phone Settings  
Airplane Mode 120  
Language 121  
NAM Selection 124  
Quick Search 125  
Security 121  
Lock 17  
Silent 18  
Standby 17  
Talk 18  
Inbox 59  
Outbox 60  
Voice 63  
Voicemail 63  
Message folder  
outbox 60  
Vibrate 19  
M-Ratings 144  
Msg Setting Sub Menu 65  
N
Message Folders  
Erase Messages 64  
Messages  
Navigation Key 14  
Navigation Key Shortcuts 33  
Notes and Tips 4  
Notes, Description 4  
Set Time 125  
System Select 124  
Photos  
Creating 54  
Sending 94  
162  
Taking Multi Shot Pictures 77  
Taking Snap Shots 76  
Picture Messages  
Online Viewing 58  
Receiving 58  
Ringer Type 117  
Volume 116  
Wallpaper 115  
Settings Menu  
Accessing 115  
Shortcut to Menus 32  
Silence Ringer 26  
Silent Mode  
Entering 18  
Exiting 19  
S
SAR values 132  
Save a Number After a Call 46  
Save Pictures 82  
Screen Layouts 78  
Security Settings  
Change Lock 122  
Emergency # 122  
Erase All Entries 124  
Lock Phone 121  
Reset Phone 123  
Restriction 124  
Q
Quality, Videos 87  
QWERTY Keypad 35  
R
Software Version, Viewing 130  
Sound Settings  
Ringer Type 117  
Receive Messages in Call 55  
Receive Picture Messages 58  
Receive Text Messages 55  
Recent Calls  
Volume 116  
Standard Limited Warranty 152  
Standby Mode 17  
Store Emergency #s 122  
Store Numbers After a Call 46  
T
Taking pictures and videos 76  
Talk Mode 18  
Text Conventions 4  
Text Entry Mode 35  
Changing 35  
Security Sub Menu 121  
Send Key 14  
Settings  
Auto Answer 119  
Auto Retry 119  
Backlight 116  
Call Answer 118  
Language 121  
Location Setting 115  
Memory Info 127  
Ringer Type 117  
TTY Mode 119  
Call Timer 29  
Data Counter 30  
Erase Logs 29  
Incoming 28  
Missed 28  
Outgoing 27  
Store Numbers 31  
Reset Your Phone 123  
Restriction 124  
Return to Last Menu 32  
Reviewing Outbox 60  
Right Soft Key 13  
Text Messages, Receiving 55  
163  
Text Modes  
Changing 35  
Three-Way Calling 21  
Timer, Calls 29  
Tip, Description 4  
Tools  
Add New Event 105  
Alarm Clock 107  
Calculator 110  
Calendar 104  
Memo Pad 106  
World Time 109  
Tools Menu  
Memory Info 52  
Save a Number After a Call 46  
Speed Dial 48  
W
Wait 44  
Wallpaper 115  
Understanding Your Phone  
Closed View of Your Phone 9  
Command Keys 13  
Display Screen 15  
Features of Your Phone 9  
Open View of Your Phone 11  
Using Abc Mode 37  
V
Warranty Information 152  
Widgets 67  
World Time 109  
Version 130  
Vibrate Mode 19  
View an Event, Calendar 104  
Voice Setting  
About Nuance 75  
Choice Lists 72  
Sensitivity 73  
Sound 74  
Voice Launch 75  
Voicemail  
Checking 63  
Accessing 101  
T-Ratings 144  
TTY Mode 119  
U
UL Certification 133  
Understanding Your Contacts  
Adding a New Contacts Entry 42  
Contacts Groups 49  
Deleting a Contacts Entry 51  
Editing an Existing Contacts  
Entry 43  
Folder 63  
Listening to 7  
Finding a Contacts Entry 40  
Volume 116  
164  

TRENDnet 2 Port DVI USB KVM Switch with Audio TK214i User Manual
Toshiba MK4018GAS (HDD2170) User Manual
Seagate BARRACUDA 720011 SERIAL ATA ST3750630AS User Manual
Sangean Electronics Sangean Desktop Clock Radio WR5 User Manual
Samsung SGH X800 User Manual
Salton ME8TDPW User Manual
Radio Shack TRAVEL SLEEP MACHINE 63 974 User Manual
Philips VR 170 User Manual
Palm Treo 755 User Manual
Nokia X500 User Manual