Qwest® Service
M520 by Samsung®
www.qwest.com
© 2007 Qwest Communications International, Inc. All rights reserved. No
reproduction in whole or in part without prior written approval. Qwest is a trademark of
Qwest Communications International, Inc. SPRINT, the NEXTEL name and logo, and
other trademarks are trademarks of Sprint Nextel. All other trademarks are the
property of their exclusive owners.
Printed in Korea.
Welcome to Qwest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Account Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using Your Phone’s Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . 23
Using a microSD Memory Card With Your Phone . . . . . . . . . . . . . . . . . . 29
Navigating Through the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2B. Controlling Your Phone’s Settings . . . . . . . . . . . . . . . . . . .51
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Updating Phone Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Call Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . .77
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Using Your Phone’s Lock Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Creating and Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Erasing Web Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Erasing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Erasing My Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Erasing Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Erasing Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Resetting Your Picture Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Resetting Your Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Resetting Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Using Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Using Data Roam Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
2E. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . 101
Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . 102
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
2F. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . . . . . 108
Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . 108
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Using Your Phone’s Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Using Your Phone’s Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Using Your Phone’s Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
2H. Using Your Phone’s Voice Services . . . . . . . . . . . . . . . . .127
Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Using Call <Name or #> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Using Send Email <Name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Using Send Text <Name or #> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Using Lookup <Name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Using Go To <App> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Using Check <Item> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
My Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Managing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
2I. Using the Built-in Camera . . . . . . . . . . . . . . . . . . . . . . . . .143
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Storing Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Sending Sprint Picture Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Managing Sprint Picture Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Printing Pictures Using PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Settings and Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
2J. Using Your Phone’s Built-in Media Player . . . . . . . . . . . .169
Your Multimedia Channel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Accessing Your Media Player’s Channel Listings . . . . . . . . . . . . . . . . . 171
Playing a Video or Audio Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Multitasking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Multimedia FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Podcast Channel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Updating Podcast Channel Preferences . . . . . . . . . . . . . . . . . . . . . . . . 182
Listening to Podcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Registration and Podcast Sign-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Using SMS Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
3B. Sprint Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
Sprint Vision Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Getting Started With Sprint Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Accessing Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
Downloading Premium Services Content . . . . . . . . . . . . . . . . . . . . . . . 225
Exploring the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
3C. Sprint Power Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231
Getting to Know Sprint Power Vision . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Exploring the Sprint Music Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Personalizing Your Service With On Demand . . . . . . . . . . . . . . . . . . . . 236
Section 4: Safety and Warranty Information . . . . . . . . . 239
4A. Important Safety Information . . . . . . . . . . . . . . . . . . . . . .241
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . 243
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Using Your Phone With a Hearing Aid Device . . . . . . . . . . . . . . . . . . . . 246
Radio Frequency (RF) Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Phone Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
4B. Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . .253
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
®
Welcome to Qwest
This guide will familiarize you with wireless service and your new phone
through simple, easy-to-follow instructions. It’s all right here – from setting
up your account passwords and voicemail to using the most advanced
features of your phone.
®
Welcome and thank you for choosing Qwest .
i
Introduction
This Phone User Guide introduces you to wireless service and all the
features of your new phone. It’s divided into four sections:
ࡗ Section 1: Getting Started
Section 2: Using Your Phone
ࡗ ࡗ ࡗ Section 3: Qwest® Service Features
Section 4: Safety and Warranty Information
Throughout this guide, you’ll find tips that highlight special shortcuts and
timely reminders to help you make the most of your new phone and
service. The Table of Contents and Index will also help you quickly locate
specific information.
You’ll get the most out of your phone if you read each section. However, if
you’d like to get right to a specific feature, simply locate that section in the
Table of Contents and go directly to that page. Follow the instructions in
that section, and you’ll be ready to use your phone in no time.
Due to updates in phone software, this printed guide may not be
the most current version for your phone. Visit www.qwest.com
and sign on to My PCS to access the most recent version of the
phone guide.
Phone
Guide Note:
Please refer to the Important Safety Information section on
page 241 to learn about information that will help you safely use
your phone. Failure to read and follow the Important Safety
Information in this phone guide may result in serious bodily injury,
death, or property damage.
WARNING
ii
Your Phone’s Menu
The following list outlines your phone’s menu structure. For more
information about navigating through the menus, please see “Navigating
Through the Menus” on page 31.
Select Menu/OK (
) to display the following:
OPTIONS (RIGHT SOFTKEY)
1: Contacts
OPTIONS (LEFT SOFTKEY)
1: Favorites
1: Text Message
3: What’s Hot
2: Instant Msg.
4: What’s New
5: Picture Album
7: <Add Favorite>
9: <Add Favorite>
*: <Add Favorite>
6: <Add Favorite>
8: <Add Favorite>
0: <Add Favorite>
#: <Add Favorite>
WEB
CALL HISTORY
1: Missed Calls
2: Incoming Calls
3: Outgoing Calls
4: Recent Calls
MEDIA PLAYER
1: Channel Listing
2: Memory Card
3: Play List
ON DEMAND
MISSED ALERTS
iii
MUSIC
MY CONTENT
1: Application Manager
2: Games
1: Get New Games
2: My Content Manager Games
3: Ringers
1: Get New Ringers
4: Screen Savers
1: Get New Screen Savers
5: Applications
1: Get New Applications
6: IM & Email
2: My Content Manager Ringers
2: My Content Manager Screen Savers
2: My Content Manager Applications
2: My Content Manager IM & Email
1: Get New IM & Email
3: Yahoo! Mail download
MESSAGING
1: Send Message
1: Text
2: Picture Mail
2: Text Message
1: Inbox
3: Drafts
2: Outbox
4: Send Text
3: Picture Mail
1: Inbox
3: Saved Mail
2: Sent Mail
4: Pending
4: IM & Email
1: Yahoo! Mail download
3: MSN
5:Earthlink
2: AOL
4: Yahoo!
6: Other
5: Voicemail
1: Call Voicemail
2: Clear Envelope
6: Chat & Dating
iv
7: Settings
1: General
1: Notification
1: Message & Icon
2: Icon only
2: Preset Messages
1: Can’t talk right now. Send me a message.
2: Call me
3: Where are you?
6: Let’s get lunch.
8: I’ll be there at
10: I love you!
13: [Empty]
4: Can you pick up
7: The meeting has been cancelled.
9: What time does it start?
11: [Empty]
14: [Empty]
5: Meet me at
12: [Empty]
15: [Empty]
18: [Empty]
16: [Empty]
17: [Empty]
19: [Empty]
20: [Empty]
3: Message Alert
1: Volume
1: Voicemail
2: Text Message
2: Text Message
2: Once
3: Picture Mail
2: Type
1: Voicemail
3: Picture Mail
3: Every 2 min
3: Reminder
1: Off
4: Auto-Erase (Yes/No)
2: Text Message
1: Save in Outbox (Yes/No)
2: Priority (Normal/Urgent)
3: Call Back # (None/xxxxxxxxxx/Other)
4: Edit Signature (On/Off)
TOOLS
1: Alarm
1: Alarm #1
2: Alarm #2
3: Alarm #3
2: Bluetooth (Yes/No)
3: Calculator
4: Calendar
v
1: Today
2: Scheduler
3: Task List
4: Countdown
5: Mass Storage
1: Connect to PC
2: File Manager
1: Phone
2: Memory card
2: Phone
3: Format
4: Memory Info.
1: ALL
3: Card
6: Memo Pad
7: Mobile Podcasts
8: World Time
1: Set DST (On/Off)
9: Update Phone SW
0: Voice Memo
1: Record
2: Review
3: Erase All
*: Voice Service
1: Call <Name or #>
3: Send Email < Name>
5: Go To <App>
2: Send Text <Name or #>
4: Lookup <Name>
6: Check <Item>
1: Choice Lists
1: Automatic
3: Always Off
2: Always On
2: Sensitivity
1: Reject the most
3: Reject more 1
5: Reject less 1
2: Reject more 2
4: Recommended
6: Reject less 2
7: Reject the least
3: Digit Dialing
1: Adapt Digits
2: Reset Digits
vi
4: Sound
1: Prompts (On/Off)
2: Digits (On/Off)
3: Names (On/Off)
5: Voice Launch
1: Talk Key
4: Name Settings (Speed/Volume)
2: Talk Key & Slide Up
6: About
PICTURES
1: Camera
Press the right softkey to view the following options:
1: Self timer
1: Off
2: 5 sec
3: 10 sec
2: Fun Tools
1: Fun Frames
1: None
4: Microphone
2: Pattern
5: Bean
3: White
6: Birthday
2: Color Tones
1: None
4: Green
2: Monochrome
5: Aqua
3: Sepia
6: Negative
3: Controls
1: Brightness (Level -5 to Level 5)
2: White Balance
1: Auto
4: Tungsten
2: Sunny
5: Fluorescent
3: Cloudy
6: Manual
3: Night Shot
1: On
2: Off
4: Settings
1: Resolution
1: 1.3M
4: Low
2: High
3: Med
2: Quality
1: Fine
2: Normal
3: Economy
vii
3: Shutter Sound
1: Off
2: Shutter1
3: Shutter2
4: Shutter3
5: Say Cheese
4: Status Bar
1: On
2: Off
5: Storage
1: Phone
2: Card
5: Launch
1: Review Pictures
1: Send
2: Upload
5: Erase
8: Album list
3: Print..
6: Copy/Move
9: Media Filter
4: Assign
7: Detail/Edit
0: Camera
2: Camcorder
1: Video Mail
2: Long Video
2: Camcorder (Video Mail/Long Video)
Press the right softkey to view the following options:
1: Self-Timer
1: Off
2: 5 Seconds
3: 10 Seconds
2: Color Tones
1: Auto
4: Green
2: Monochrome
5: Aqua
3: Sepia
6: Negative
3: Controls..
1: Brightness (Auto/Manual)
2: White Balance
1: Auto
4: Tungsten
2: Sunny
5: Fluorescent
3: Cloudy
6: Manual
3: Night Shot
1: On
2: Off
4: Settings..
viii
1: Quality
1: Fine
2: Normal
3: Economy
2: Save Video To
1: Phone
2: Memory Card
5: Review Albums
1: Play
2: Send
3: Upload
4: Assign
7: Detail/Edit
0: Camcorder
5: Erase
8: Album list
6: Copy/Move
9: Media Filter
6: Camera
3: Picture Mail
1: Inbox
3: Saved Mail
2: Sent Mail
4: Pending
4: My Albums
1: In Phone
2: Memory Card
3: Online Albums
5: PictBridge
6: Settings and Info
1: Auto Save To
1: Phone
2: Memory Card
2: Status Bar (On/Off)
3: Account Info
CONTACTS
1: Find
2: Add New Entry
3: Speed Dial #s
4: Groups
1: Unassigned
3: Friends
5: VIPs
2: Family
4: Colleague
6: Empty
7: Empty
ix
5: My Phone #
6: My Name Card
7: Services
1: Account Info
3: Dir Assist
2: Customer Service
4: Qwest Operator
SETTINGS
1: Display
1: Main Screen
1: Screensaver
1: Preset Images
1: Image Gallery 01
4: Image Gallery 04
2: Image Gallery 02
2: Memory card
3: Image Gallery 03
2: My Content
3: My Albums
1: In Phone
2: Foregrounds
1: Clock/Calendar
1: Digital Clock (Small Digital/Large Digital)
2: Analog Clock (Large Analog/Dual Clock)
3: Calendar (Calendar/2 Mon. Calendar)
2: Greeting
1: Qwest
2: Custom
3: Other Foregrounds
1: Speed Dial #s
4: Task List
2: Today
5: Countdown
3: Schedule
6: None
3: Incoming Calls
1: With Caller ID
1: Preset Animation
2: No Caller ID
2: My Content
2: My Content
3: My Albums
3: My Albums
1: Preset Animation
x
2: Brightness (Level 1-5)
3: Backlight (Main Display)
1: Slider Up
2: 30 seconds
3: 15 seconds
4: 8 seconds
4: Dialing Font
1: Basic
1: Color
1: Basic
4: Hyphenate
2: Rainbow
2: Normal
3: Monochrome
2: Size
1: Large
3: Small
2: Feather
5: PowerSave Mode
1: On
2: Off
6: Keypad Light
1: Slider Up
4: 8 seconds
2: 30 seconds
5: Off
3: 15 seconds
7: Language
1: English
2: Español
8: Status Light
1: On
2: Sounds
1: Volume
1: Ringer
2: Off
1: Ringer Off
4: Always Vibrate
2: 1-Beep
3: Level 1 - 8
2: Earpiece (Level 1 - 8)
3: Headset (Level 1 - 8)
4: Speakerphone (Level 1 - 8)
xi
5: Advanced
1: Alarms
1: Use Ringer Volume
2: Applications
1: Sound
1: Use Ringer Volume
2: Separate Volume
3: Always Vibrate
2: Separate Volume
2: Game Vibrate
1: On
2: Off
3: Picture Mail
1: Use Ringer Volume
4: Text Message
1: Use Ringer Volume
5: Voice Mail
2: Separate Volume
2: Separate Volume
2: Separate Volume
3: Always Vibrate
3: Always Vibrate
3: Always Vibrate
1: Use Ringer Volume
2: Ringer Type
1: Voice Calls
1: With Caller ID
1: Single Tones
4: My Content
2: Ring Tones
5: My Videos
3: Melodies
3: Melodies
2: No Caller ID
1: Single Tones
4: My Content
2: Ring Tones
5: My Videos
3: Roaming
1: Normal
2: Distinctive
2: Messages
1: Voicemail
1: Single Tones
2: Ring Tones
2: Ring Tones
3: Melodies
3: Melodies
4: My Content
2: Text Message
1: Single Tones
4: My Content
xii
3: Picture Mail
1: Single Tones
4: My Content
2: Ring Tones
3: Melodies
3: Schedule
1: Single Tones
4: My Content
2: Ring Tones
3: Melodies
3: Alerts
1: Beep each minute (On/Off)
3: Connect (On/Off)
2: Out of Service (On/Off)
4: Signal Fade/Call Drop (On/Off)
5: Power On (Off/Mystery/Crystal/Samsung)
6: Power Off (Off/Mystery/Crystal/Samsung)
4: Keytones
1: Tone Type
1: DTMF
2: Xylophone
2: Long
3: Voice
2: Tone Length
1: Short
3: Tone Volume
1: Key Tone Off
2: Level 1 - 8
3: Bluetooth
1: On/Off
2: Visibility
1: Always visible
2: Visible for 3min
3: Hidden
3: Device Name
4: Device Info
5: Trusted Devices
6: FTP Contents Folder
1: Phone
2: Memory card
2: HeadSet
7: Select Device type
1: Hands-Free
8: Voice Caller ID (On/Off)
xiii
4: Messaging
1: Notification
1: Message & Icon
2: Icon only
2: Once
2: Message Reminder
1: Off
3: Every 2 min
3: Other
3: Callback Number
1: None
2: XXXXXXXXX
4: Auto-Delete (Yes/No)
5: Signature (On/Off)
6: Pre-set Message
1: Can’t talk right now. Send me a message.
2: Call me
3: Where are you?
6: Let’s get lunch.
8: I’ll be there at
10: I love you!
13: [Empty]
4: Can you pick up
7: The meeting has been cancelled.
9: What time does it start?
11: [Empty]
14: [Empty]
5: Meet me at
12: [Empty]
15: [Empty]
18: [Empty]
16: [Empty]
17: [Empty]
19: [Empty]
20: [Empty]
7: Draft Alert (On/Off)
8: Priority
1: Normal
2: Urgent
9: Save in Outbox (Yes/No)
5: Text Entry
1: Auto-Capital (On/Off)
2: Auto-Space (On/Off)
3: Dual Language
1: None
2: Spanish
4: My Words
5: Used word Dic. (Continue/Cancel)
6: Display Candidate (Display On/Display Off)
xiv
7: Prediction Start
1: 3rd letters
2: 4th letters
3: 5th letters
8: Help
6: Phone Information
1: Phone Number
3: Version
2: Icon Glossary
4: Advanced
7: More...
1: Accessibility
1: TTY
1: TTY Off
2: TTY Full
3: TTY + Hear
4: TTY + Talk
2: Voice Service
1: Choice Lists
1: Automatic
2: Always On
3: Always Off
2: Sensitivity
1: Reject the most
4: Recommended
7: Reject the least
2: Reject more 2
5: Reject less 1
3: Reject more 1
6: Reject less 2
3: Digit Dialing
1: Adapt Digits
4: Sound
1: Prompts (On/Off)
2: Reset Digits
2: Digits (On/Off)
3: Names (On/Off)
4: Name Settings (Speed/Volume)
5: Voice Launch
1: Talk Key
6: About
2: Talk Key & Slide Up
2: Airplane Mode (On/Off/On PowerUp)
3: Browser
1: Bookmarks
2: Clear Cache (Yes/No)
xv
3: Clear Cookies (Yes/No)
4: Edit Homepage
4: Call Setup
1: Auto Answer
1: Yes
2: No
2: Abbreviated Dialing (On/Off)
3: Call Answer
1: Any Key
2: Talk Key
3: Slider Up
4: Contacts Match (On/Off)
5: Voice Caller ID (On/Off)
5: Data
1: On/Off
1: Disable Data
2: Cancel
2: Net Guard (On/Off)
3: Update Data Profile
6: Headset Mode
1: Turbo Button
1: On
2: Off
2: Earpiece
1: Stereo
2: Mono
3: Ringer Sound
1: Normal
2: Headset Only
7: Location (On/Off)
8: Restrict and Lock
1: Voice
1: Restrict
1: Outgoing Call
1: Allow all
2: Contacts Only
3: Special # Only
xvi
2: Lock
1: Lock
2: Data
2: Unlock
1: On/Off
2: Off and Lock
1: Lock
2: Unlock
3: Camera/Pictures
1: Unlock
2: Camera/Video
3: Picture
4: Lock All
4: Lock my Phone
1: Unlocked
2: On Power-Up
3: Lock Now
9: Roaming
1: Set Mode
1: Automatic
2: Roaming only
2: Off
3: Qwest
2: Call Guard
1: On
3: Data Roaming
1: Always Ask
2: Never Ask
0: Security
1: Change Lock Code
2: Special Numbers
1: Empty
2: Empty
3: Empty
3: Erase/Reset
1: Erase Web Cookies
4: Erase Contacts
7: Erase Message
0: Reset All Settings
2: Erase Web History
5: Erase My Content
8: Reset Picture Account
*: Reset Phone
3: Erase Web Cache
6: Erase Pic/Video
9: Reset Favorite
xvii
*: Navigation Keys
1: Left Navigation
1: Contacts
2: Voice Memo
5: Voice Service
8: Display
11: Media Player
14: Send Text
3: Scheduler
6: Ringer Type
9: Alarms
12: Web
15: Missed Alerts
4: Messaging
7: My Content
10: Calculator
13: Inbox
16: On Demand
17: Send Quick Text
2: Right Navigation
1: Contacts
2: Voice Memo
5: Voice Service
8: Display
11: Media Player
14: Send Text
3: Scheduler
6: Ringer Type
9: Alarms
12: Web
15: Missed Alerts
4: Messaging
7: My Content
10: Calculator
13: Inbox
16: On Demand
17: Send Quick Text
3: Up Navigation
1: Contacts
2: Voice Memo
5: Voice Service
8: Display
11: Media Player
14: Send Text
3: Scheduler
6: Ringer Type
9: Alarms
12: Web
15: Missed Alerts
4: Messaging
7: My Content
10: Calculator
13: Inbox
16: On Demand
17: Send Quick Text
4: Down Navigation
1: Contacts
2: Voice Memo
5: Voice Service
8: Display
11: Media Player
14: Send Text
3: Scheduler
6: Ringer Type
9: Alarms
12: Web
15: Missed Alerts
4: Messaging
7: My Content
10: Calculator
13: Inbox
16: On Demand
17: Send Quick Text
#: Key Guard
1: Slider Down
2: After 5 seconds
3: Off
IN USE MENU
Select Options (right softkey) to display the following options:
1: Key Mute
4: 3-Way Call
7: Tools
2: Contacts
5: Call History
8: Phone Info
3: Messaging
6: Voice Memo
xviii
2
Section 1A
Setting Up Service
In This Section
ࡗ ࡗ ࡗ ࡗ Getting Started
Setting Up Your Voicemail
Account Passwords
Getting Help
Setting up service on your new phone is quick and easy. This
section walks you through the necessary steps to unlock your phone, set
up your voicemail, establish passwords, and contact Qwest for assistance
with your wireless service.
Section 1A: Setting Up Service
3
Getting Started
Unlocking Your Phone
To unlock your phone, follow these easy steps:
1. Press
to turn the phone on.
2. Press any key to active the User Lock dialog.
To select a softkey action, press the softkey button directly below the
softkey text that appears at the bottom left and bottom right of your
phone’s display screen. Softkey actions change according to the screen
you’re viewing and will not appear if there is no corresponding action
available.
Note:
3. Enter your four-digit lock code. (For security purposes, the lock code
is ciphered and not visible as you type.)
If you can't recall your lock code, try using the last four digits of your
wireless phone number. If this doesn't work, call Qwest Wireless®
Repair at 1-888-879-0611.
Tip:
4
Section 1A: Setting Up Service
Setting Up Your Voicemail
All unanswered calls to your phone are automatically transferred to your
voicemail, even if your phone is in use or turned off. Therefore, you will
want to set up your voicemail and personal greeting as soon as your phone
is activated.
Before gaining access to your voicemail, your phone must be activated.
(See “Reaching Qwest Wireless Customer Service” on page 7.)
Note:
To set up your voicemail:
1. From standby mode, press and hold
2. Follow the system prompts to:
Ⅲ Record your name announcement.
Ⅲ Record your greeting.
.
Ⅲ Create your personalized passcode.
Ⅲ Change your personal options.
Ⅲ Choose whether or not to activate One-Touch Message Access
(a feature that lets you access messages simply by pressing
and holding
passcode).
, bypassing the need for you to enter your
Voicemail Passcode
If you are concerned about unauthorized access to your voicemail
account, Qwest recommends you enable your voicemail passcode.
Note:
For more information about using your voicemail, see “Using Voicemail” on
page 200.
Section 1A: Setting Up Service
5
Account Passwords
As a Qwest customer, you enjoy unlimited access to your personal account
information, your voicemail account, and your Sprint Power Vision account.
To ensure that no one else has access to your information, you will need to
create passwords to protect your privacy.
Account Password
If you are the account owner, you’ll have an account password to
Customer Service.
Voicemail Password
You’ll create your voicemail password (or passcode) when you set up your
voicemail. See “Setting Up Your Voicemail” on page 200 for more information
on your voicemail password.
Sprint Power Vision Password
With your M520 by Samsung, you may elect to set up a Sprint Power Vision
of Premium Services content and to also protect personal information on
multi-phone accounts.
For more information, or to change your passwords, sign on to
www.qwest.com or call Qwest Wireless™ Repair Service at
1-888-879-0611.
6
Section 1A: Setting Up Service
Getting Help
Visit www.qwest.com
You can go online to:
ⅷ
ⅷ
ⅷ
ⅷ
Review coverage maps.
Access your account information.
Find information and accessories for your phone.
And more.
Reaching Qwest Wireless Customer Service
You can reach Qwest Wireless Customer Service online or by phone:
ⅷ
ⅷ
Call us toll-free at 1-888-869-0611.
Directory Assistance
You have access to a variety of services and information through Directory
Assistance, including residential, business, and government listings. There
is a per-call charge, and you will be billed for the airtime.
To call Directory Assistance:
ᮣ
Press
.
Operator Services
Operator Services provides assistance when placing collect calls or when
placing calls billed to a local telephone calling card or third party.
To access Operator Services:
Next
ᮣ
Press
.
For more information or to see the latest in products and services, visit us
Section 1A: Setting Up Service
7
8
10
Section 2A
Phone Basics
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Front View of Your Phone
Viewing the Display Screen
Features of Your Phone
Turning Your Phone On and Off
Using Your Phone’s Battery and Charger
Using a microSD™ Memory Card With Your Phone
Navigating Through the Menus
Displaying Your Phone Number
Making and Answering Calls
Entering Text
Your phone is packed with features that simplify your life and
expand your ability to stay connected to the people and
information that are important to you. This section will guide you
through the basic functions and calling features of your phone.
Section 2A: Phone Basics
11
Front View of Your Phone
1. Speaker
2. Display Screen
3. Menu/OK Key
16. Navigation Key
4. Left Softkey
5. Speaker Key
15. Right Softkey
14. BACK (Clear) Key
13. END (Power) Key
6. TALK Key
7. Voicemail Key
8. Numeric Keypad
9. Shift/Asterisk Key
12. Space/Pound Key
11. Microphone
10. Plus Code
Dialing Key
12
Section 2A: Phone Basics
Key Functions
1. Speaker allows you to hear the other caller and the different ring
tones or sounds offered by your phone.
2. Display Screen displays all the information needed to operate your
phone, such as the call status, the contacts, the date and time, and
the signal and battery strength.
3. Menu/OK Key allows you to access the menu screen. It also allows
you to accept choices offered when navigating through a menu.
4. Left Softkey allows you to select softkey actions or menu items
corresponding to the bottom left line on the display screen. It also
provides quick access to your favorite or often used phone features.
5. Speaker Key allows you to enable the speakerphone feature during
an active call. When idle, this key also provides quick access to a
listing of the 20 most recent incoming, outgoing, and missed calls.
6. TALK Key allows you to place or receive calls, answer Call Waiting,
use Three-Way Calling, or activate Voice Dial.
7. Voicemail Key allows you to quickly access your voicemail. Press
and hold this key for two seconds to automatically dial your
voicemail’s phone number.
8. Numeric Keypad allows you to enter numbers, letters, and
characters.
9. Shift/Asterisk Key enters the asterisk [*] character for calling
features. In the text entry mode, press this key to change the
capitalization mode.
10. Plus Code Dialing Key automatically dials the international access
code for the country in which you are located (for instance, 011 for
international calls placed from the United States).
11. Microphone allows other callers to hear you clearly when you are
speaking to them.
12. Space/Pound Key enters the pound [#] character for calling
features. In the text entry mode, press this key to enter a space.
Section 2A: Phone Basics
13
13. END (Power) Key ends a call. Press and hold this key for two
seconds to turn your phone on or off. While in the main menu, it
returns the phone to standby mode and then cancels your input.
When you receive an incoming call, press this key to enter silent
mode and mute the ringer.
14. BACK (Clear) Key deletes characters from the display while in text
entry mode. When in a menu, press the BACK key to return to the
previous menu. This key also allows you to return to the previous
screen in a
Sprint Vision session.
15. Right Softkey allows you to select softkey actions or menu items
corresponding to the bottom right line on the display screen. It also
provides quick access to your phone contacts list.
16. Navigation Key scrolls through the phone’s menu options and acts
as a shortcut key from standby mode.
Ⅲ Press Up to access Messaging.
Ⅲ Press Down to access My Content.
Ⅲ Press Right to launch Web.
Ⅲ Press Left to access the Media Player.
(Keys can be reassigned to create customized shortcuts.)
14
Section 2A: Phone Basics
Exterior Phone Features
6. Camera
1. Volume Key
5. Camera Key
4. microSD Card
Slot
2. Power/Accessory
Interface Connector
3. Status Light
1. Volume Key allows you to adjust the ringer volume in standby mode
(with the phone open) or adjust the voice volume during a call. The
volume key can also be used to scroll up or down to navigate
through the different menu options. To mute the ringer during an
incoming call, press the volume key up or down.
2. Power/Accessory Interface Connector allows you to connect a
power cable and optional accessories such as a USB cable or a
hands-free Bluetooth headset for convenient, hands-free
conversations.
3. Status Light blinks to indicate an incoming call. This feature must
first be enabled via the Settings > Display > Status Light menu.
Section 2A: Phone Basics
15
4. microSD Card Slot allows you to install an optional microSD card
for use in Contacts, data, and media.
5. Camera Key allows you to take pictures when in camera mode.
6. Camera allows you take a picture or video of whatever is in front of
the phone’s line of sight.
Video is shot in MPEG-4 format at 15 fps with a maximum recording
time determined by the available space on the storage media (phone or
memory card). The video quality is as follows: 100k (Fine), 80k
(Normal), 64k (Economy).
Note:
16
Section 2A: Phone Basics
Viewing the Display Screen
Your phone’s display screen provides a wealth of information about your
phone’s status and options. This list identifies many of the symbols you’ll
see on your phone’s display screen:
To view a list of your phone’s icons and descriptions, from the main
menu select Settings > Phone Information > Icon Glossary.
Tip:
Indicates that your Sprint Vision connection is active.
Indicates that you are sending information.
Indicates that you are receiving information.
Indicates that your connection is dormant or inactive.
Indicates that high-speed Sprint Power Vision connection is
available.
Indicates that your phone is connected to a high-speed
Sprint Power Visionconnection.
Indicates that your high-speed Sprint Power Vision connection
is active and communicating.
Indicates that the high-speed Sprint Power Visionconnection is
dormant.
Indicates that position location is active.
Indicates that position location is inactive.
Indicates that your phone is in Web security mode.
Indicates that your phone is in a roaming area.
Section 2A: Phone Basics
17
Indicates that you have new voicemail, text, numeric pages,
picture messages, video messages, or Wireless Application
Protocol (WAP) messages waiting.
Indicates that there is an unread message in your Inbox.
Indicates that the text message has been read.
Indicates that there is an unread urgent message in your Inbox.
Indicates that you have read the urgent message.
Indicates that the message was sent.
X
Indicates that the message failed to be sent.
Indicates that you have a message pending.
Indicates that the message is a draft.
Indicates that there is URL text contained within the text
message.
Indicates that your message is locked.
Indicates that your phone is in vibrate all mode.
Indicates that your phone ringer is turned on and the vibrate
mode option is checked.
Indicates that the TTY option is on.
Indicates that the ringer is set at a level between 1 - 8 or
that 1-Beep is selected.
Indicates that your phone’s ringer is turned off and the vibrate
mode is not checked.
Indicates that an alarm is set on your phone.
Indicates your phone is in use and a call is in progress.
18
Section 2A: Phone Basics
Indicates that your phone cannot find a signal.
Displays your current signal strength. The more lines you have,
the stronger your signal.
Indicates your current battery charge strength. (Icon shown
fully charged in idle mode.)
Indicates your current battery charge strength. (Icon shown
fully discharged in idle mode.)
Indicates that your phone is muted and no sound will be heard
through the microphone.
Indicates that key tones have been muted.
Indicates that the speakerphone is enabled.
Indicates that the camera is enabled.
Indicates that the camcorder is enabled.
Indicates that the self-timer function is enabled.
Indicates that the white balance has been set to Auto.
+
+
Indicates that the white balance has been set to Sunny. This
icon is also used for indicating the brightness level.
Indicates that the white balance has been set to Cloudy.
Indicates that the white balance has been set to Tungsten.
Indicates that the white balance has been set to Fluorescent.
Indicates that the white balance has been set to Manual.
+
-
Indicates that a video or voice memo is currently being
recorded.
Indicates that a voice memo or video has been paused.
Section 2A: Phone Basics
19
Indicates that a voice memo or video is playing.
Indicates that media has been uploaded to an online album or
folder.
Indicates that voice captioning is enabled and that audio is
currently being recorded.
Indicates that Bluetooth technology is active and enabled
(actual icon is black).
Indicates that the Bluetooth device is connected (actual icon is
blue).
Indicates that the Bluetooth device is hidden (actual icon is
gray).
Indicates that your phone is using a microSD memory card.
Display indicators help you manage your roaming charges by letting you
know when you’re off the home network. (For more information, see
Section 2D: Controlling Your Roaming Experience on page 91.)
Note:
20
Section 2A: Phone Basics
Features of Your Phone
Congratulations on the purchase of your phone. The M520 by Samsung is
lightweight, easy-to-use, and reliable, and it also offers many significant
features and service options. The following list previews some of those
features and provides page numbers where you can find out more:
ⅷ
Digital dual-band capability allows you to make and receive calls while
on the home network and to roam on other 1900 and 800 MHz digital
networks where roaming agreements have been implemented
(page 91).
ⅷ
ⅷ
ⅷ
Sprint Vision provides access to the wireless Internet in digital mode
(page 215).
and convenient messaging capabilities.
Games, ringers, screen savers, and other applications can be
downloaded to make your phone as unique as you are. Additional
charges may apply (page 225).
ⅷ
ⅷ
The Contacts list can store a maximum of 500 phone numbers total,
with contacts each containing a maximum of five phone numbers
(page 103).
The built-in Scheduler offers several personal information
management features to help you manage your busy lifestyle
(page 113).
ⅷ
ⅷ
ⅷ
Your phone is equipped with a Location feature for use in connection
with location-based services (page 61).
T9 Text Input lets you quickly type messages with one keypress per
letter (page 46).
Speed dial lets you dial phone numbers with one or two keypresses
(page 44).
Section 2A: Phone Basics
21
Turning Your Phone On and Off
Turning Your Phone On
To turn your phone on:
ᮣ
Press and release
on your wireless phone.
Once your phone is on, it may display a “Looking for Service” screen,
which indicates your phone is searching for a signal from the network.
When your phone does finds a signal, it automatically enters standby mode
– the phone’s idle state. At this point, you are ready to begin making and
receiving calls.
In Power Save mode, your phone searches for a signal periodically without
your intervention. You can also initiate a search for service by pressing any
key (when your phone is turned on).
The Power Save feature helps to conserve your battery power when you
are in an area where there is no signal.
Note:
Turning Your Phone Off
To turn your phone off:
ᮣ
Press and hold
for two seconds until you see the powering
down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is
charging).
22
Section 2A: Phone Basics
Using Your Phone’s Battery and Charger
Use only Qwest-approved or manufacturer-approved batteries and
chargers with your phone. The failure to use a Qwest-approved or
manufacturer-approved battery and charger may increase the risk
that your phone will overheat, catch fire, or explode, resulting in
serious bodily injury, death, or property damage.
Warning!
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to
recharge your battery before it is fully drained. The battery provides up to
3.3 hours of continuous digital talk time.
When the battery reaches 5% of its capacity, the battery icon blinks. When
there are approximately two minutes of talk time left, the phone sounds an
audible alert and then powers down.
Long backlight settings, searching for service, vibrate mode, Bluetooth,
and browser use will affect the battery’s talk and standby times.
Note:
Tip:
Be sure to watch your phone’s battery level indicator and charge the
battery before it runs out of power.
Section 2A: Phone Basics
23
Installing the Battery
To install the Li-Ion battery:
1. Pressing down on the release (1), remove the battery cover (located
on the back of the phone) by sliding the cover in the direction of the
arrow (2).
Release
2. Carefully lift the battery cover away from the phone.
3. Slide the battery into the compartment so that the tabs on the end
align with the slots at the bottom of the phone, making sure to line
up the gold contacts (3).
Gold
Contact
Pins
ꢁ
ꢀ
4. Gently press down on the battery until it snaps into place (4).
24
Section 2A: Phone Basics
5. Replace the cover by lining up the tabs and sliding the cover up until
it snaps into place. Check that the battery is properly installed before
turning on the phone.
Removing the Battery
To remove the Li-Ion battery:
1. Follow steps 1 and 2 from “Installing the Battery” on page 24.
2. Grip the battery at the back (1) and pull it up and out (2).
Be careful not to damage the contact pins during this process.
Caution!
Section 2A: Phone Basics
25
Charging the Battery
Your phone’s Li-Ion battery is rechargeable and should be charged as soon
as possible so you can begin using your phone.
It is recommended that you completely charge your battery before first
using your phone. This guarantees you begin using your phone with a
fully charged battery.
Tip:
Keeping track of your battery’s charge is important. If your battery level
becomes too low, your phone automatically shuts off and you will lose all
the information you were just working on. For a quick check of your
phone’s battery level, glance at the battery charge indicator located in the
upper-right corner of your phone’s display screen. If the battery charge is
getting too low, the battery icon (
warning tone.
) blinks and the phone sounds a
Always use a Qwest-approved phone charger or vehicle power adapter to
charge your battery.
Using the wrong battery charger could cause damage to your
phone and void the warranty.
Warning!
Using the Phone Charger
To use the phone charger provided with your phone:
ᮣ
Plug the terminal end of the charger into the phone’s power interface
connector and the other end into an electrical outlet.
It takes about three hours to fully recharge a completely rundown
(discharged) battery.
Note:
26
Section 2A: Phone Basics
Display
Screen
DEF
MNO
Z
XY
W
ce
Spa
JKL
TUV
t
x
JKL
Ne
Interface
Connector
PQRS
t
Shif
Incorrect
Correct
+
Ⅲ The battery charge state (charged/charging) is indicated on the
phone’s display screen. Three bars on the battery icon (
indicate a fully charged battery.
)
Ⅲ As the phone is being charged, an animated Battery Charging
icon appears on the main LCD.
Section 2A: Phone Basics
27
UL Certified Phone Charger
The phone charger for this phone has met UL 1310 safety requirements.
Please adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION TO A
SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF THE
PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTED IN A VERTICAL OR HORIZONTAL
OR FLOOR MOUNT POSITION.
28
Section 2A: Phone Basics
Using a microSD™ Memory Card With
Your Phone
microSD Memory Card
Your phone is capable of supporting an optional memory storage medium
known as a microSD memory card (TransFlash™ card). This card is the
newest standard of flash memory specifically designed for use with ultra-
small mobile phones and other devices. It is ideal for storing media-rich
files such as music, videos, and photographs in your phone.
It tMemory cards with over 2 GB storage capacity will not work with this
phone..
Note:
Installing the microSD Memory Card
To install the card:
1. Locate the memory slot on the right side of the phone and flip up the
microSD plastic cover..
microSD slot
plastic cover
R
GHI
P Q R S
Shi
f
t
ABC
JKL
TUV
Ne
x
t
DEF
MNO
W
X
Y
Z
Memory Slot
2
microSD
card
2. Remove the preinstalled dummy SD card from the slot by pressing
on it and releasing.
Section 2A: Phone Basics
29
3. Orient the microSD’s contact gold contact pins downward (see
illustration on previous page).
4. Carefully insert the microSD card into the opening and firmly push it
in until you hear a click that indicates the card is securely installed.
To remove the card, firmly push the end of the card further into the
phone and release—the card should pop out from the memory card
slot. If this does not work, repeat this process again.
Note:
5. With the card now securely installed, replace the plastic cover over
the microSD slot on the phone.
30
Section 2A: Phone Basics
Navigating Through the Menus
The navigation key on your phone allows you to scroll through menus
quickly and easily. The scroll bar at the right of the menu keeps track of
your position in the menu at all times.
To navigate through a menu, simply press the navigation key up or down. If
you are in a first-level menu, such as Settings, you may also navigate to
the next or previous first-level menu by pressing the navigation key right or
left.
For an outline of your phone’s menu, please see “Your Phone’s Menu” on
page iii.
Selecting Menu Items
As you navigate through the menu using the navigation key (
), menu
options are highlighted. Select any numbered option by simply pressing the
corresponding number on the phone’s keypad. You may also select any
item by highlighting it and pressing
.
For example, if you want to view your last incoming call:
1. Select Menu (
) to access the main menu.
ABC
2. Select Call History by pressing
pressing
3. Select Incoming Calls by pressing
or by highlighting it and
.
ABC
or by highlighting it and
pressing
. (If you have received any calls, they are displayed on
the screen.)
For the purposes of this guide, these steps condense into “Select Menu
Note:
Note:
> Call History > Incoming Calls.”
To select Menu, press the Menu key. To select menu options (such as
Settings, above), highlight the option and press OK. (If the menu options
are numbered, you may also select an option simply by pressing the
corresponding number key.)
Section 2A: Phone Basics
31
Backing Up Within a Menu
To go to the previous menu:
ᮣ
Press
To return to standby mode:
Press
.
ᮣ
.
Displaying Your Phone Number
Just in case you forget your phone number, your phone can remind you.
To display your phone number:
ᮣ
Select Menu > Settings > Phone Information > Phone
Number. (Your phone number and other information about your
phone is then displayed.)
32
Section 2A: Phone Basics
Making and Answering Calls
Holding Your Phone
Since the antenna has been integrated into the design of the phone,
it is important not to block the reception path accidentally to ensure the
strongest signal possible is achieved. The orbital internal antenna is
located near the bottom of your handset (below the keypad).
Section 2A: Phone Basics
33
Making Calls
any landline phone. Just enter the number on the keypad and press
and you’re on your way to clear calls.
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number from standby mode.
(If you make a mistake while dialing, press
a time. Press and hold to erase the entire number.)
3. Press . (To make a call when you are roaming and
Call Guard is enabled, press and then
See “Using Call Guard” on page 95.)
4. Press or close the phone when you are finished with your call.
to erase one digit at
.
To redial your previous call, press TALK twice.
Tip:
You can also place calls from your phone by using the Contacts menu (page
105), speed dialing numbers from your Contacts (page 44), using Voice
Activated Dialing (page 128), and using your Call History listings (page
100).
34
Section 2A: Phone Basics
Dialing Options
After entering numbers within standby mode, select Options (
) to see
the following dialing options.
To initiate an option, press the corresponding softkey.
ⅷ
(1) Send Msg allows you to send text
messages or Picture Mail to the number
being dialed.
ⅷ
ⅷ
(2) Dial dials the number or digits
displayed.
(3) Save: Enter a seven- or ten-digit
number (phone number and area code) and
select Options (
) > Save to save the
phone number in your Contacts. (See
“Saving a Phone Number” on page 41.)
ⅷ
ⅷ
ⅷ
(4) Find: Enter a digit or string of digits and select
Options (
) > Find to display Contacts entries that contain the
entered numbers. (See “Finding a Phone Number” on page 42.)
(5) Hard Pause allows you to enter a hard pause (the phone waits for
user input). To continue dialing, you must press a key. (See “Dialing
and Saving Phone Numbers With Pauses” on page 42.)
(6) 2sec Pause allows you to enter a two-second pause. The phone
will pause, then continue dialing without any additional keys being
pressed. (See “Dialing and Saving Phone Numbers With Pauses” on
page 42.)
Section 2A: Phone Basics
35
Answering Calls
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming calls go
directly to voicemail.)
2. Press
to answer an incoming call. (Depending on your phone’s
settings, you may also answer incoming calls by opening the phone
or by pressing any number key. See “Call Answer Mode” on page 74
for more information.)
Your phone notifies you of incoming calls in the following ways:
ⅷ
ⅷ
ⅷ
ⅷ
The phone rings and/or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
The Status Light blinks. (See “Activating the Status Light” on page 55.)
If the incoming call is from a number stored in your Contacts, the entry’s
name is displayed. The caller’s phone number may also be displayed, if
available.
To select an option, press the corresponding softkey. (See “Call Answer
Mode” on page 74.)
ⅷ
Answer to answer the call.
ⅷ
Ignore to send the call to your voicemail box.
To quiet the ringer, press the back, end, or volume key.
Tip:
36
Section 2A: Phone Basics
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your roaming charges when
making or receiving calls while outside the home network. Please see
Section 2D: Controlling Your Roaming Experience for more information
about roaming.
To answer a call when you are roaming and Call Guard is enabled:
ᮣ
Select Answer to answer the call. (See “Using Call Guard” on page
95 for additional information.)
When your phone is off, incoming calls go directly to voicemail.
Note:
Ending a Call
To disconnect a call when you are finished:
ᮣ
Close the phone or press
.
Missed Call Notification
When an incoming call is not answered, the Missed Call log is displayed on
your screen.
To display the Missed Call entry from the notification screen:
ᮣ
Highlight the entry and press
dial the phone number,
. (To
press
.)
To display a Missed Call entry from standby
mode:
1. Select Menu > Call History > Missed
Calls.
2. Highlight the entry you wish to view and
press
.
Calling Emergency Numbers
WXYZ
You can place calls to 911 (dial
and press
), even if
your phone is locked or your account is restricted.
Section 2A: Phone Basics
37
When you place an emergency call, your phone automatically enters
Emergency mode.
Note:
During an emergency call, select Options (
) to display your options.
To select an option, highlight it using the navigation key and press
.
ⅷ
ⅷ
Unlock Phone to unlock your phone (appears only if the phone is
locked).
To close the pop-up menu (appears only if the phone is unlocked),
press the key.
Select Options (right soft key), and then select Phone Info > Phone
Number to display your phone number during an emergency call.
Tip:
To exit Emergency mode:
1. Press
2. Press
to end a 911 call.
Space
Shift
until Emergency mode is exited.
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System (GPS) chip
necessary for utilizing E911 emergency location services where available.
When you place an emergency 911 call, your phone’s GPS feature begins
to gather the information necessary to calculate your approximate location.
Depending on several variables, including availability and access to satellite
signals, it may take up to 30 seconds or more to determine and then report
your approximate location.
Always report your location to the 911 operator when placing an
emergency call. Some designated emergency call takers, known as
Public Safety Answering Points (PSAPs) may not be equipped to receive
GPS location information from your phone.
Note:
38
Section 2A: Phone Basics
In-Call Options
Pressing Options (
) during a call displays a list of features you may
use during the course of an active call. To select an option, press the
corresponding keypad number or highlight the option and press
following options are available through the Options menu:
. The
Due to higher volume levels, do not place the phone near your
ear during monitor use.
Warning!
ⅷ
(1) Key Mute or Key Unmute allows you to mute the key tones on
your phone so the other caller cannot hear you pressing any keys on
your phone.
ⅷ
ⅷ
ⅷ
(2) Contacts opens the Contacts menu.
(3) Messaging opens the Messaging menu options.
(4) 3-Way Call allows you to talk to two different people at the same
time. (For more information, see “Using Caller ID” on page 211.)
(5) Call History checks your call log for Outgoing, Incoming, Missed,
and Recent calls. You can also erase the logs from this menu.
(6) Voice Memo allows you to record incoming audio from your
conversation. (For more information, see “Managing Voice Memos” on
page 139.)
ⅷ
ⅷ
ⅷ
ⅷ
(7) Tools opens the Tools menu options.
(8) Phone Info displays the following menu options:
(1) Phone Number
(2) Icon Glossary
(3) Version
(4) Advanced
During a call, the left softkey (
) functions as the Mute button.
1. Press it to Mute the phone’s microphone for privacy. While muted,
the Mute icon (
display screen.
) is displayed on the upper-left of the main
2. Press it again to Unmute the phone.
Section 2A: Phone Basics
39
End-of-Call Options
After receiving a call from or making a call to a phone number that is not in
your Contacts, the phone number and the duration of the call are displayed.
ᮣ
Select Save (
) to add the new number to your Contacts by
either:
Ⅲ New Entry: to create a new Contacts entry.
Ⅲ Existing Entry: to append the information to an existing
Contacts entry. (See “Saving a Phone Number” on page 41.)
After receiving a call from or making a call to a phone number that is
already in your Contacts, the entry name, phone number, and the duration
of the call are displayed.
ᮣ
Select Send Message (
) to send the contact a message.
The End-of-Call options are not displayed for calls identified as No ID or
Restricted.
Note:
40
Section 2A: Phone Basics
Saving a Phone Number
The Contacts list can store a maximum of 500 phone numbers total, with
each contact entry containing a maximum of 5 phone numbers. Each
entry’s name can contain up to 20 characters.
ⅷ
Examples – each scenario shows the maximum
of 500 numbers:
Ⅲ 5 numbers per entry: 100 Individuals
Ⅲ 2 numbers per entry: 250 Individuals
Ⅲ 1 number per entry: 500 Individuals
Your phone automatically sorts the Contacts entries alphabetically. (For
more information, see “Using Contacts” on page 103.)
To save a number from standby mode:
1. Enter a phone number and select Options (
) > Save.
The Save As screen does not display for the first entry saved into the
Contacts. Skip to step 3 if you are entering the first number in the
Contacts.
Note:
2. Select New Entry or Existing Entry and press
3. Use your navigation key to select a label (Mobile, Home, Work,
Pager, or Others) and press
4. Enter a name for the entry using the numeric keys. Type in the first
character and then select Options ( ) to select the desired entry
.
.
method T9(English), Alpha, Symbol, or Number. (See “Entering
Text” on page 45.)
5. When you’ve finished entering the name, press (
). You can also
choose to enter additional information for this contact such as an
email address, a nickname, or an assigned ringer.
Section 2A: Phone Basics
41
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a specific
string of numbers.
To find a phone number:
1. While in standby mode, enter three or more of the last digits of the
phone number. (The more numbers you enter, the more specific the
search becomes.)
2. Select Options (
) > Find. (All Contacts entries matching the
entered numbers are then displayed.)
3. To display the Contacts entry that contains the phone number you
entered, highlight the entry and press
.
4. To dial the number, press
.
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated
systems, such as voicemail or credit card billing.
Creating a saved series of numbers with pauses is very useful when
entering data into an automated system.
Tip:
For example, if accessing your bank information requires dialing a toll-
free number, followed by an account number and then your PIN, you
could place a two-second pause after each group of numbers to ensure
that they would be read correctly.
There are two types of pauses available on your
phone:
ⅷ
Hard Pause sends the next set of
numbers in your Contacts entry only after
you press
. This is indicated with a P
within the number sequence.
2sec Pause automatically sends the next
set of numbers after two seconds. This is
indicated with a T within the number
sequence.
ⅷ
42
Section 2A: Phone Basics
You can have multiple pauses in a phone number and combine both
two-second and hard pauses.
Note:
To save phone numbers with pauses:
1. Enter the phone number.
2. Select Options (
), and select either Hard Pause or
2sec Pause.
3. Enter additional numbers and pauses as required.
4. Select Options (
) > Save > New Entry to save the number in
your Contacts.
To dial phone numbers with pauses:
1. Select Menu > Contacts > Find.
2. Highlight the entry you want to call and press
.
3. Press
to dial the number.
When dialing a number with a hard pause, press the Talk key to send
the next set of numbers.
Note
Plus (+) Code Dialing
When placing international calls, you can use Plus Code Dialing to
automatically enter the international access code for your location (for
example, 011 for international calls placed from the United States).
To make a call using Plus Code Dialing:
Next
1. Press and hold
until a “+” appears on your phone display.
2. Dial the country code and phone number you’re calling and press
. (The access code for international dialing will automatically be
dialed, followed by the country code and phone number.)
Section 2A: Phone Basics
43
Dialing From the Contacts List
To dial directly from a Contacts entry:
1. Select Menu > Contacts > Find.
Select Contacts (right softkey) to list entries.
Shortcut:
2. Highlight the entry you want to call and press
– or –
.
To dial another number from the entry, highlight the name and press
, and then highlight the number you wish to call and press
.
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to
make contacting friends and family as easy as pressing a button or two.
With this feature, you can dial speed dial entries using one keypress for
locations 2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ
Press and hold the appropriate key for approximately two seconds.
The display confirms that the number has been dialed when it shows
the name and number of the speed dial.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds. The
display confirms that the number has been dialed when it shows the
name and number of the speed dial.
Speed dialing is not available when you are roaming. When you are
roaming off the home network, you must always dial using 11 digits
(1 + area code + number).
Note:
44
Section 2A: Phone Basics
Entering Text
Selecting a Character Input Mode
Your phone provides convenient ways to enter words, letters, punctuation,
and numbers whenever you are prompted to enter text (for example, when
adding a Contacts entry or when using email and SMS Text Messaging).
To change the character input mode:
1. When you display a screen where you can enter text, press Options
(
) to change the character input mode.
2. Select one of the following options:
Ⅲ T9(English) to enter text using a predictive text entering
system that reduces the number of keys that need to be
pressed while entering a word
(see page 46).
Ⅲ Alpha to cycle through the alpha characters associated with
the letters on the keypad
(see page 47).
Ⅲ Symbol to enter symbols (see page 49).
Ⅲ Number to enter numbers by pressing the numbers on the
keypad (see page 49).
Ⅲ Preset Msg to enter preprogrammed messages
(see page 49).
Ⅲ Recent Msg to enter a message from a list of previous
messages (see page 49).
Ⅲ Emoticons to enter “smileys” (see page 49).
Ⅲ Text Options to configure these options:
Auto-Capital, Used word Dic., Display Cand., Prediction Start,
Dual Language, and Insert Space (see page 50).
When entering text, press the * (Shift) key to change letter capitalization
(abc > Abc > ABC) used on the current character.
Tip:
Section 2A: Phone Basics
45
Entering Characters Using T9 Text Input
T9 Text Input lets you enter text into your phone by allowing you to key in
any character using single keystrokes. (To select the T9 English mode
when entering text, see “Selecting a Character Input Mode” on page 45.)
T9 Text Input analyzes the letters you enter using an intuitive built-in word
database and creates a suitable word. (The word may change as you type.)
To enter a word using T9(English) Text Input:
1. Select the T9(English) character input mode. (See “Selecting a
Character Input Mode” on page 45.)
When entering text in this mode, press the * (Shift) key to change letter
capitalization (T9Word > T9WORD > T9word) used on the current word.
Tip:
2. Press the corresponding keys once per letter to enter a word. As an
ABC
JKL
JKL
example, press
you make a mistake, press
and hold to delete an entire entry.)
to enter the word “Bill.” (If
to erase a single character. Press
Options > Display Candidate feature is enabled and three or more
characters are entered.
Tip:
Since the T9 prediction listing starts at three letters, when working with
two letters, use the (0) key to begin cycling through possible two-letter
choices. If, as an example, you type the word Go (keys 4 and 6), T9
prediction might provide the word In, but by pressing the (0) key you
can cycle through to the next possible word choice, which is Go.
Note:
Space
ᮣ
To accept a word and insert a space, press
.
46
Section 2A: Phone Basics
Entering Characters Using Alpha Mode
To enter characters using Alpha mode (multi-tap key entry):
1. Select the Alpha mode (See “Selecting a Character Input Mode” on
page 45).
2. Press the corresponding keys repeatedly until the desired letter is
ABC
displayed. For example, to enter the word “Bill,” press
twice,
JKL
JKL
three times,
you make a mistake, press
and hold to delete an entire entry.)
three times, and
three times again. (If
to erase a single character. Press
By default, the first letter of an entry is capitalized and the following letters
are lowercases. After a character is entered, the cursor automatically
advances to the next space after two seconds or when you enter a
character on a different key.
Characters scroll in the following order (lowercase characters shown in
parentheses):
Accented characters are available only if the Dual Language text option
is set to Spanish.
Note:
. ,@ 1 ? ! * # /
PQRS
P Q R S 7 (p q r s 7)
ABC
TUV
A B C 2 Á Ã Ç (a b c 2 á ã ç)
D E F 3 É (d e f 3 é)
G H I 4 Í (g h i 4 í)
T U V 8 Ú Ü (t u v 8 ú ü)
DEF
WXYZ
W X Y Z 9 (w x y z 9)
Shift
Shift
0
Next
JKL
J K L 5 (j k l 5)
Space
MNO
M N O 6 Ó Ñ (m n o 6 ó ñ)
Space
When entering the same letter twice or a different letter on the same
key, wait a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Tip:
Section 2A: Phone Basics
47
Entering Characters In Dual Language
By enabling the Dual Language text option, you can use the keys for both
English and Spanish text entry. If the Display Candidate and Prediction
Start text options are enabled, the available word choices presented are
from both language sets (English/Spanish).
To enter characters in dual language mode:
1. When you display a screen where you can enter text, press the
Options (
) > Text Options > Dual Language.
2. Select Spanish and press
. (See “Setting Text Options” on
page 50.)
To disable dual language mode:
1. When you display a screen where you can enter text, press the
Options ( ) > Text Options > Dual Language.
2. Select None and press
.
48
Section 2A: Phone Basics
Entering Numbers, Symbols, Emoticons, Preset
Messages, and Recent Messages
To enter numbers:
ᮣ
Select the Number mode and press the appropriate key.
(See “Selecting a Character Input Mode” on page 45.)
To enter symbols:
ᮣ
on page 45.) To enter a symbol, press the appropriate key indicated
on the display.
To enter emoticons (smileys):
ᮣ
Select the Emoticons mode and press the
appropriate key. (See “Selecting a Character Input Mode” on
page 45.)
To enter preset messages:
1. Select the Preset Msg mode. (See “Selecting a Character Input
Mode” on page 45.)
2. Scroll to the desired preprogrammed message and
press
.
Preset messages make composing text messages even easier by
allowing you to select from a list of preset messages, such as “Meet me
at,” “Let’s get lunch,” or a customized preset message of your own. (For
more information on preset messages, please see “Managing Preset
Messages” on page 65.)
Note:
To enter recent messages:
1. Select the Recent Msg mode. (See “Selecting a Character Input
Mode” on page 45.)
2. Scroll to the desired message and press
.
Section 2A: Phone Basics
49
Setting Text Options
The Text Options menu allows you to specify more automated features
during the text entry process. These options can help streamline the text
entry process by correcting for capitalization, spelling, spacing, and
completing the most commonly entered words for you.
To specify text options:
1. Select the Text Options mode and then use your navigation key to
scroll down the list and activate the desired text entry options:
Ⅲ Auto Capital allows you to turn capitalization on or off for the
next character that comes after a full stop punctuation mark
followed by a space.
Ⅲ Used word Dic. allows you store words used frequently and
predict word usage quickly the next time the word is used in
text mode.
Ⅲ Display Cand. allows the phone to display predicted words,
either one at a time or as a list.
Ⅲ Prediction Start allows you to configure the phone to display
possible word candidates after a preset number of characters
have been entered. You can choose the feature to begin after
the 3rd, 4th, or 5th letters.
Ⅲ Dual Language allows you to select word candidates to
display in English only (None) or in English and Spanish
(Spanish).
Ⅲ Insert Space allows you to turn on or off the ability to insert a
space automatically after a word is selected from the candidate
list.
2. When you have completed making your changes to these options,
select Close (
) to go back to the previous screen.
50
Section 2A: Phone Basics
Section 2B
Controlling Your Phone’s Settings
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Display Settings
Sound Settings
Location Settings
Messaging Settings
Airplane Mode
TTY Use
Updating Phone Software
Phone Setup Options
Call Setup Options
Using the Settings menu options available on your phone, you can
customize your phone to sound, look, and operate just the way you
want it to. This section describes how you can change your phone’s
settings to best suit your needs. Take a few moments to review these
options and to adjust or add settings that are right for you.
Section 2B: Controlling Your Phone’s Settings
51
Display Settings
Changing the Text Greeting
The text greeting can be up to 14 characters in length and is displayed on
your phone’s screen in standby mode. You may choose to keep the phone’s
default greeting (“Qwest”), or you may enter your own custom greeting.
To display or change your greeting:
1. Select Menu > Settings > Display > Main Screen >
Foregrounds > Greeting > Custom.
2. Enter a custom greeting by using your keypad and press
“Entering Text” on page 45.) (To erase the existing greeting one
character at a time, press . To erase the entire greeting, press
and hold .)
. (See
Changing the Brightness
You can adjust your screen’s brightness to suit your surroundings.
To adjust the display’s brightness:
1. Select Menu > Settings > Display > Brightness.
2. Press your navigation key up or down to adjust the brightness and
press Done (
).
52
Section 2B: Controlling Your Phone’s Settings
Changing the Backlight Time Length
The backlight setting lets you select how long the main display screen and
keypad are backlit after any keypress is made.
To change the main display setting:
1. Select Menu > Settings > Display > Backlight.
2. Select Slider Up, 30 seconds, 15 seconds, or 8 seconds, and
press
.
To change the keypad setting:
1. Select Menu > Settings > Display > Keypad Light.
2. Select Slider Up, 30 seconds, 15 seconds, 8 seconds, or Off,
and press
.
Long backlight settings affect the battery’s talk and standby times.
Note:
To activate the PowerSave Mode:
1. Select Menu > Settings > Display > PowerSave Mode.
2. Select On or Off, and press
.
Section 2B: Controlling Your Phone’s Settings
53
Changing the Screen Saver
Your phone offers options for what you see on the main display screen
while powering on or off and when in standby mode.
To change the screen saver:
1. Select Menu > Settings > Display > Main Screen > Screen
Saver.
2. Select Preset Images, My Content, or My Albums and
press
.
3. Choose the desired image and select Assign (
).
Changing the Dialing Font
This setting allows you to adjust the display appearance when dialing
phone numbers.
Alternative Dialing Fonts
In addition to the normal (Basic) display font, your phone also includes an
additional display font called Feather. These fonts display graphical
representations onscreen when dialing.
To select an alternative dialing font:
1. Select Menu > Settings > Display > Dialing Font.
2. Select Feather and press
.
The Feather font style has preset styles and colors. Only the Basic
option allows for modification of the font color and text size.
Note:
To change the dialing font color:
1. Select Menu > Settings > Display > Dialing Font > Basic >
Color and press
.
2. Select Basic, Rainbow, Monochrome, or Hyphenate and press
.
Rainbow makes each digit of a number a different color; Monochrome
assigns a single color to an entire number.
Note:
54
Section 2B: Controlling Your Phone’s Settings
3. Select Done (
) to apply the change.
To change the dialing font size:
1. Select Menu > Settings > Display > Dialing Font > Basic >
Size and press
.
2. Select Large, Normal, or Small and press
.
Activating the Status Light
This setting allows you to toggle the active state of the status light on the
outside of the phone.
To activate the Status Light:
1. Select Menu > Settings > Display > Status Light.
2. Select On or Off and press
.
When this feature is activated, the Menu/OK key will:
ⅷ
ⅷ
Flash continuously when a new incoming call is received.
Blink intermittently when service is available.
Section 2B: Controlling Your Phone’s Settings
55
Sound Settings
Adjusting the Phone’s Volume Settings
You can manually adjust your phone’s volume settings to suit your needs
and your environment.
To adjust the phone’s ringer volume:
1. Select Menu > Settings > Sounds > Volume > Ringer.
2. Use the navigation key to select the ringer setting Ringer Off,
1-Beep, or Level 1 - 8. (Select Always Vibrate to make the ringer
vibrate at any volume level.)
3. Use the navigation key to choose a volume level and select Done
(
).
You can adjust the ringer volume in standby mode (or the earpiece
volume during a call) by using the volume key on the left side of your
phone.
Tip:
To adjust your phone’s other volume settings:
1. Select Menu > Settings > Sounds > Volume > Advanced.
2. Select Alarms, Applications (> Sound), Picture Mail, Text
Message, or Voice Mail, and press
.
3. Using the navigation key, select either Use Ringer Volume or
Separate Volume. (If available, you can also select Always
Vibrate to make the ringer vibrate at any volume level.)
4. Use the navigation key to choose a volume level and select Done
(
).
56
Section 2B: Controlling Your Phone’s Settings
Ringer Types
Ringer types help you identify incoming calls and messages. You can
assign ringer types to individual Contacts entries, types of calls, and types
of messages.
ⅷ
Downloaded Ringers can be downloaded right to your phone.
ⅷ
Preprogrammed Ringers include a variety of standard ringer types
and familiar music.
ⅷ
Vibrating Ringer alerts you to calls or messages without disturbing
others.
Selecting Ringer Types for Voice Calls
Your phone provides a variety of ringer options that allow you to customize
your ring and volume settings. These options allow you to identify incoming
calls by the ring.
To select a ringer type for voice calls:
1. Select Menu > Settings > Sounds > Ringer Type > Voice Calls.
2. Select With Caller ID, No Caller ID, or Roaming.
Videos and press
. (The list of ringers or videos is then
displayed.)
4. Use your navigation key (
) to scroll through the list of available
ringers. A sample ringer will sound as you highlight each option.
5. Press
to assign the desired ringer.
Selecting a Ringer Type for Roaming
To select a ringer type for roaming:
1. Select Menu > Settings > Sounds > Ringer Type >
Voice Calls > Roaming.
2. Select Normal or Distinctive and press
.
Section 2B: Controlling Your Phone’s Settings
57
Selecting Ringer Types for Messages
To select a ringer type for messages:
1. Select Menu > Settings > Sounds > Ringer Type > Messages.
2. Select Voicemail, Text Message, or Picture Mail.
3. Select Single Tones, Ring Tones, Melodies, or My Content and
press
4. Use your navigation key (
ringers. A sample ringer will sound as you highlight each option.
. (The list of available ringers is then displayed.)
) to scroll through the list of available
5. Press
to assign the desired ringer.
Selecting Ringer Types for Scheduled Events
To select a ringer type for scheduled events:
1. Select Menu > Settings > Sounds > Ringer Type > Schedule.
2. Select Single Tones, Ring Tones, Melodies, or My Content and
press
3. Use your navigation key (
ringers. A sample ringer will sound as you highlight each option.
. (The list of available ringers is displayed.)
) to scroll through the available
4. Press
to assign the desired ringer.
58
Section 2B: Controlling Your Phone’s Settings
Selecting a Key Tone
Your phone offers a number of options for selecting the audible tones
accompanying a keypress. (Longer tone lengths may be better for tone
recognition when dialing voicemail or other automated systems.)
To select a key tone:
1. Select Menu > Settings > Sounds > Keytones.
2. Select Tone Type and press
.
3. Select DTMF, Xylophone, or Voice and press
.
Selecting a Key Tone Length
The key tone length allows you to choose between short or long tones
when pressing a key. Longer tone lengths may be better for tone
recognition when dialing voicemail or other automated systems.
To set the key tone length:
1. Select Menu > Settings > Sounds > Keytones
2. Select Tone Length and press
.
3. Select Short or Long and press
.
Selecting a Key Tone Volume
Your phone allows you to set the desired volume level of the key tones.
To set the key tone volume level:
1. Select Menu > Settings > Sounds > Keytones
2. Select Tone Volume and press
3. Use the navigation key ( ) until you hear the desired tone level
(Key Tone Off or Level 1 - 8) and press
.
.
Section 2B: Controlling Your Phone’s Settings
59
Alert Notification
Your phone can alert you with an audible tone when you change service
areas, once a minute during a voice call, when the signal fades, when
powering your phone on or off, or when a call has been connected.
To enable or disable alert sounds:
1. Select Menu > Settings > Sounds > Alerts.
2. Select Beep each minute, Out of Service, Connect,
Signal Fade/Call Drop, Power On, or Power Off and
press
.
The Power On and Power Off options can be set to Off, Mystery,
Crystal, or Samsung.
Note:
3. Select On or Off and press
.
Silence All
There may be times when you need to silence your phone entirely. The
phone’s Silence All option allows you to mute all sounds without turning
your phone off.
To activate Silence All:
ᮣ
With the phone open, press and hold the volume key down in
standby mode. (The screen will display “Silence All.”)
To deactivate Silence All:
ᮣ
Press the volume key up repeatedly to select a desired volume level.
60
Section 2B: Controlling Your Phone’s Settings
Location Settings
Your phone is equipped with a Location feature for use in connection with
location-based services.
The Location feature allows the network to detect your position. Turning
Location off will hide your location from everyone except 911.
Turning Location on will allow the network to detect your position using
GPS technology, making some applications and services easier to use.
Turning Location off will disable the GPS location function for all
purposes except 911, but will not hide your general location based on
the cell site serving your call. No application or service may use your
location without your request or permission. GPS-enhanced 911 is not
available in all areas.
Note:
To enable your phone’s Location feature:
1. Select Menu > Settings > More > Location. (The Location
disclaimer is displayed.)
2. Read the disclaimer and select OK (
3. Select On or Off press
When the Location feature is on, your phone’s standby screen will display
the icon. When Location is turned off, the icon will be displayed
on the main display screen.
).
.
Section 2B: Controlling Your Phone’s Settings
61
Messaging Settings
Staying connected to your friends and family has never been easier. With
your phone’s advanced messaging capabilities, you can send and receive
many different kinds of text messages without placing a voice call.
Your phone’s messaging settings make text messaging even faster and
easier by letting you decide how you would like to be notified of new
messages, create a signature with each sent message, and create your
own canned messages, to name just a few.
Setting Message Alerts
When new messages arrive, you can choose to have your phone notify you
by playing an audible alert.
To hear an alert when you receive a new message:
1. Select Menu > Messaging > Settings > General >
Message Alert.
2. Select Type and press
Mail) and press
4. Select Single Tones, Ring Tones, Melodies, or My Content and
press . (The list of available ringers is then displayed.)
5. Use your navigation key ( ) to scroll through the list of available
ringers. A sample ringer will sound as you highlight each option.
.
.
6. Select a ringer and press
to accept your changes and return to
the previous screen.
62
Section 2B: Controlling Your Phone’s Settings
To set the alert volume for a new message:
1. Select Menu > Messaging > Settings > General >
Message Alert.
2. Select Volume and press
3. Select an option to change (Voicemail, Text Message, or Picture
Mail) and press
.
.
4. Using the navigation key, select either Use Ringer Volume or
Separate Volume. (If available, you can also select Always
Vibrate to make the ringer vibrate at any volume level.)
5. Use the navigation key to choose a volume level and select
Done (
).
Setting Message Reminders
When new messages arrive, you can choose to ignore them and set the
phone to periodically remind you of them by playing an audible alert at a set
interval.
To hear a reminder alert for unread messages:
1. Select Menu > Messaging > Settings > General > Messsage
Alert > Reminder.
2. Select Off, Once, or Every 2 min and press
.
Section 2B: Controlling Your Phone’s Settings
63
Deleting Old Messages
You can delete messages that you’ve already read whenever you like, or
you can have your phone delete them automatically for you when your
phone's message memory becomes full.
To automatically delete read messages:
1. Select Menu > Messaging > Settings > General >
Auto-Erase.
2. Select Yes or No and press
.
Ⅲ If the Inbox becomes full and the Auto-Delete option is enabled
Ⅲ If the Inbox becomes full and the Auto-Delete option is not
enabled (No), no further messages can be received until some
of the stored messages have been deleted.
3. Select Return (
).
Adding a Customized Signature
Each message you send can have a customized signature to reflect
your personality.
To add a customized signature to each sent message:
1. Select Menu > Messaging > Settings > Text Message > Edit
Signature.
2. Select On and press
to your outgoing messages, select Off and press
3. Enter your signature using the keypad and when you’re finished,
press or select Done ( ).
(See “Entering Text” on page 45.)
. (If you do not wish to attach a signature
.
64
Section 2B: Controlling Your Phone’s Settings
Managing Preset Messages
Your phone is programmed with 10 preset messages to help make sending
text messages faster and easier. These messages, such as “Where are
you?,” “Let’s get lunch,” and “Meet me at,” can be customized or deleted
to suit your needs. You can even add your own preset messages to the list
(up to a combined total of 20 messages).
To edit or delete an existing preset message:
1. Select Menu > Messaging > Settings > General > Preset
Messages. (The list of preset messages is displayed.)
2. To edit a preset message, highlight it and select Edit (
). (See
“Entering Text” on page 45).
– or –
Highlight a preset message, select Options (
), and then select
Erase to delete the selected message. Select Yes to confirm.
(Select No to cancel the deletion.)
3. Press
to apply the selection.
To add a new preset message:
1. Select Menu > Messaging > Settings
> General > Preset Messages.
(The list of preset messages is displayed.)
2. To add a new message, select an empty
message location, and then select
Options (
3. Enter your message and select Done
). (Your new message is added to
) > Add New.
(
the beginning of the list. See “Entering
Text” on page 45.)
Section 2B: Controlling Your Phone’s Settings
65
Text Message Settings
Text Message settings allow you to configure the options associated with a
text messages sent from your phone. These options include:
ⅷ
Save in Outbox - allows you to save a copy of a sent message in your
outbox.
The Save in Outbox parameters can also be accessed by navigating to
Menu > Settings >Messaging > Save in Outbox.
Note:
ⅷ
ⅷ
ⅷ
Priority - allows you to set a priority level of Normal or Urgent for text
messages.
Call Back # - allows you to set the callback number for the recipient
to view when receiving a text message.
Edit Signature - allows you to set up your signature which will
append itself to the end of all text messages sent from your phone.
To save new messages in the outbox:
1. Select Menu > Messaging > Settings > Text Message >
Save in Outbox.
2. Select Yes or No and press
.
To set the priority level:
1. Select Menu > Messaging > Settings > Text Message >
Priority.
2. Select Normal or Urgent and press
.
To set the callback number:
1. Select Menu > Messaging > Settings > Text Message >
Call Back #.
2. Select None, your phone number (xxx-xxx-xxxx), or Other and
press
.
66
Section 2B: Controlling Your Phone’s Settings
Airplane Mode
Airplane Mode allows you to use many of your phone’s features, such as
Games, Music, Notepad, and Voice Memos when you are in an airplane or
in any other area where making or receiving calls or data is prohibited.
When your phone is in Airplane Mode, it cannot send or receive any calls or
access online information.
To set your phone to Airplane Mode:
1. Select Menu > Settings > More > Airplane Mode and
press
2. Read the disclaimer and press
3. Select On, Off, or On PowerUp and press
.
or select OK (
).
.
While in Airplane Mode, your phone’s standby screen will display “Phone
Off.”
Section 2B: Controlling Your Phone’s Settings
67
TTY Use
A TTY (also known as a TDD or Text Telephone) is a telecommunications
device that allows people who are deaf, hard of hearing, or who have
speech or language disabilities to communicate by telephone.
Your phone is compatible with select TTY devices. Please check with the
manufacturer of your TTY device to ensure that it supports digital wireless
transmission. Your phone and TTY device will connect via a special cable
that plugs into your phone’s headset jack. If this cable was not provided
with your TTY device, contact your TTY device manufacturer to purchase
the connector cable.
When establishing your wireless service, please call Qwest via
the state Telecommunications Relay Service (TRS) by first dialing
PQRS
. Then provide the state TRS with this
number: 866-727-4889.
68
Section 2B: Controlling Your Phone’s Settings
To turn TTY options on or off:
1. Select Menu > Settings > More > Accessibility > TTY and
press
2. Read the informational message and press
).
3. Select TTY Off, TTY Full, TTY + Hear, or TTY + Talk and
press
.
or select OK
(
.
In TTY Mode, your phone will display the TTY access icon when a
headset or TTY device is plugged in.
Note:
If TTY mode is enabled, the audio quality of non-TTY devices
connected to the headset jack may be impaired.
911 Emergency Calling
WARNING
Qwest recommends that TTY users make emergency calls by
other means, including Telecommunications Relay Services
(TRS), analog cellular, and landline communications. Wireless
TTY calls to 911 may be corrupted when received by public
safety answering points (PSAPs), rendering some
communications unintelligible. The problem encountered
appears related to TTY equipment or software used by PSAPs.
This matter has been brought to the attention of the FCC, and
the wireless industry and PSAP community are currently
working to resolve this.
Section 2B: Controlling Your Phone’s Settings
69
Updating Phone Software
The update phone software option allows you to download and update
the software in your phone automatically. Only the internal software is
updated; no contact entries or other information saved to your phone will
be deleted.
To set your phone to Airplane Mode:
1. Select Menu > Tools > Update Phone SW from standby mode.
2. Follow the onscreen instructions.
70
Section 2B: Controlling Your Phone’s Settings
Phone Setup Options
Favorites
Your phone offers you the option of assigning favorite or often-used
functions. Selecting Favorites (
) in standby mode launches your
personal favorite list.
To assign a shortcut key:
1. Select Favorites (
) from the standby
screen.
2. Select a location using your navigation
key.
3. Select Options (
) > Replace to edit
the location of an existing Favorite
function.
– or –
If the selected location is empty, press
to assign a new function to it.
list of available function categories
and press
.
5. Press the navigation key up or down to highlight a feature option and
select Assign (
) to make the new assignment.
Display Language
You can choose to display your phone’s onscreen menus in English or in
Spanish (Español).
To assign a language for the phone’s display:
1. Select Menu > Settings > Display > Language.
2. Select English or Español and press
.
Section 2B: Controlling Your Phone’s Settings
71
Call Setup Options
Call setup allows you to configure the following options:
ⅷ
Auto Answer to answer incoming calls automatically with the optional
hands-free car kit.
ⅷ
Abbreviated Dialing to program a five- or six-digit prefix for
commonly used phone numbers.
ⅷ
ⅷ
ⅷ
Call Answer to set up how you answer incoming calls.
Contacts Match to turn the contacts matching feature on or off.
Voice Caller ID to turn caller ID on or off.
Auto-Answer Mode
You may set your phone to automatically pick up incoming calls when
connected to an optional hands-free car kit or headset.
To set auto-answer mode:
1. Select Menu > Settings > More > Call Setup > Auto Answer.
2. Highlight Yes and press
to answer calls automatically when
the phone is connected to a hands-free car kit or a headset (sold
separately). Remember, your phone will answer calls in auto-answer
mode even if you are not present.
72
Section 2B: Controlling Your Phone’s Settings
Abbreviated Dialing
Abbreviated dialing allows you to program a five- or six-digit prefix for
commonly used phone numbers. When abbreviated dialing is on, you can
enter the last four or five digits of any phone number that matches the five-
or six-digit prefix, and the number is dialed.
To set up abbreviated dialing:
1. Select Menu > Settings > More >
Call Setup > Abbreviated Dialing
2. Select On and press
.
3. Input the five- or six-digit prefix (for
example, an area code and prefix) and
press
.
Making an Abbreviated Dial Call
To make a new call:
1. Enter the last four or five digits of the
prefix phone number.
2. Abbrev. Dial is displayed in the lower left
corner with the prefix digits displayed.
3. Press
to make the call.
Section 2B: Controlling Your Phone’s Settings
73
Call Answer Mode
You can determine how to answer incoming calls on your phone by
pressing any number key, by pressing
phone.
, or by simply opening the
To set call answer mode:
1. Select Menu > Settings > More > Call Setup > Call Answer.
2. To select an option, highlight it and press
.
Ⅲ Any Key to allow an incoming call to be answered by opening
the phone or pressing any key.
Ⅲ Talk Key to require
to be pressed to answer all incoming
calls.
Ⅲ Slider Up to answer the call when the phone is opened.
Contacts Match
With the Contacts Match feature enabled, you can dial any number saved
in your Contacts by entering the last four or five digits of the number.
To access Contacts Match:
Match.
2. Select On or Off and press
.
If there is more than one Contacts entry that matches the last four or
five digits, a list is displayed that allows you to select the desired
number to call.
Note:
74
Section 2B: Controlling Your Phone’s Settings
Restricting Outgoing Voice Calls
Allows you to restrict your phone's outgoing calls according to one of the
following rules:
ⅷ
ⅷ
Contacts Only to allow outgoing calls to only those numbers saved in
the Contacts list.
ⅷ
Special# Only to allow outgoing calls to only the numbers set up in
the special numbers list. (See “Creating and Using Special Numbers”
on page 82.)
To access call restriction:
1. Select Menu > Settings > More > Restrict and Lock > Voice.
2. Enter your lock code using your keypad.
3. Select Restrict > Outgoing Call and press
4. Select Allow all, Contacts Only, or Special# Only and
press
.
.
In addition to Voice, several phone features and functions (Data and
Camera/Pictures) can be locked or restricted from use. Lock my
Phone is a feature which prevents unauthorized access to the User
Interface by locking all of the phone’s keys and buttons. (See “Using
Your Phone’s Lock Features” on page 79.)
Note:
Voice Caller ID
Voice Caller ID announces incoming calls for callers that have been saved
in your Contacts.
To enable voice caller ID:
1. Select Menu > Settings > More > Call Setup > Voice Caller ID.
2. Press the navigation key up or down to select On and press
.
To disable voice caller ID:
1. Select Menu > Settings > More > Call Setup > Voice Caller ID.
2. Press the navigation key up or down to select Off and press
.
Section 2B: Controlling Your Phone’s Settings
75
76
Setting Your Phone’s Security
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Accessing the Security Menu
Using Your Phone’s Lock Features
Lock Services
Creating and Using Special Numbers
Erasing Web Settings
Erasing Contacts
Erasing My Content
Erasing Pictures and Videos
Erasing Text Messages
Resetting Your Picture Account
Resetting Your Favorites
Resetting Your Phone’s Settings
Resetting Your Phone
ࡗ Security Features for Sprint Vision
By using the security settings on your phone, you receive peace of
mind without sacrificing flexibility. This section will familiarize you with
your phone’s security settings.
Section 2C: Setting Your Phone’s Security
77
Accessing the Security Menu
All of your phone’s security settings are available through the Security
menu. You must enter your lock code to view the Security menu.
To access the Security menu:
1. Select Menu > Settings > More > Security.
2. Enter your lock code to display the Security menu.
If you can't recall your lock code, try using the last four digits of your
wireless phone number. If this doesn't work, call call Qwest Wireless®
at 1-888-879-0611.
Tip:
78
Section 2C: Setting Your Phone’s Security
Using Your Phone’s Lock Features
Locking Your Phone
When your phone is locked, you can only receive incoming calls or make
calls to 911 or special numbers. (See “Creating and Using Special
Numbers” on page 82.)
To lock your phone:
1. Select Menu > Settings > More > Restrict and Lock.
2. Highlight Lock my Phone and press
.
3. Enter your lock code.
4. Select On Power-Up, or Lock Now. (To set your phone to lock the
next time it is turned on, select On Power-Up and press
.)
Unlocking Your Phone
To unlock your phone:
1. From standby mode, press
,
,
,
,
,
,
,
or
to access the User Lock dialog.
2. Enter your lock code.
Calling in Lock Mode
You can place calls to 911 and to your special numbers when in lock mode.
(For information on special numbers, see “Creating and Using Special
Numbers” on page 82.)
To place an outgoing call in lock mode:
ᮣ
To call an emergency number or a special number, enter the phone
number and press
.
Section 2C: Setting Your Phone’s Security
79
Locking Pic/Video
When your pictures and videos are locked, it prevents anyone from
accessing the Pic/Video menu without first entering a security code. You
can choose to lock the Camera/Video or Picture menus independently or to
lock all menus.
To lock the pic/video menu:
1. Select Menu > Settings > More > Restrict and Lock >
Camera/Pictures.
2. Enter your lock code. (The Picture/Video Lock? security menu
is displayed.)
3. Select Lock All and press
.
Changing the Lock Code
To change your lock code:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Change Lock Code.
4. Enter your new lock code and select Next (
).
5. Re-enter your new lock code and select Done (
).
80
Section 2C: Setting Your Phone’s Security
Lock Services
This setting allows you to lock voice call functions and dataservices. When
you enable Lock Services, you will be unable to make new calls (excluding
emergency numbers) or to access data services until the lock has been
disabled in the Security menu.
Locking Voice Services
1. Select Menu > Settings > More > Restrict and Lock > Voice.
2. Enter your lock code. (The Voice security menu is displayed.)
3. Select Lock and press
.
4. Select Lock and press
. (See “Restricting Outgoing Voice Calls”
on page 75.)
Locking Sprint Power Vision
1. Select Menu > Settings > More > Restrict and Lock > Data.
2. Select Off and Lock and press
.
3. Enter your lock code. (The Power Vision menu is displayed.)
4. Select Lock and press
. (See “Enabling and Disabling Sprint
Vision Services” on page 89.)
Section 2C: Setting Your Phone’s Security
81
Creating and Using Special Numbers
Special numbers are important numbers that you have designated as being
“always available.” You can call and receive calls from special numbers
even if your phone is locked.
You can save up to three special numbers in addition to your Contacts
entries (the same number may be in both directories).
To add or replace a special number:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Special Numbers.
4. Select a location for your entry (1–3) and press
5. Enter the number and press
.
.
There are no speed dial options associated with special numbers.
Note:
82
Section 2C: Setting Your Phone’s Security
Erasing Web Settings
Erasing Cookies
You can quickly and easily erase cookies that may have been installed on
your phone by Web sites you have visited.
To erase all the cookies:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Web Cookies and press
4. If you are certain you would like to erase all of your cookies, select
Yes and press
.
.
Erasing Web History
You can quickly and easily erase the history of Web sites you have recently
visited.
To erase your Web history:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Web History and press
4. If you are certain you would like to erase the history of your visited
Web sites, select Yes and press
.
.
Section 2C: Setting Your Phone’s Security
83
Erasing Web Cache
You can quickly and easily erase all of the temporary files (such as TMP,
GIFF, and JPEG) stored on your phone by visited Web sites.
To erase your Web cache:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Web Cache and press
.
4. If you are certain you would like to erase these temporary Web files,
select Yes and press
.
Erasing Contacts
You can quickly and easily erase all the contents of your Contacts list.
To erase all the names and numbers in your Contacts:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Contacts and press
.
4. If you are certain you would like to erase all your Contacts entries,
select Yes from the Erase Entire Contacts? dialog or No to cancel
the operation, and press
.
84
Section 2C: Setting Your Phone’s Security
Erasing My Content
You can use your phone’s security menu to erase all content you have
downloaded to your phone.
To erase all downloaded content:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase My Content and press
.
4. If you are certain that you would like to erase all downloaded content
on your phone, select Yes and press
.
Erasing Pictures and Videos
You can use your phone’s Security menu to erase all pictures and videos
stored in your phone.
This process will erase all pictures and videos stored in both the phone.
Note:
To erase all pictures and videos:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Pic/Video and press
.
4. If you are certain that you would like to erase all picture and video
content on your phone, select Yes and press
.
Section 2C: Setting Your Phone’s Security
85
Erasing Text Messages
You can use your phone’s Security menu to erase all text messages stored
in your phone.
This process will permanently erase all text messages currently stored
in the phone but will not erase SMS Voice and Picture Mail messages.
Note:
To erase all text messages:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Erase Message and press
.
4. If you are certain that you would like to erase all text messages
stored in your phone, select Yes and press
.
Resetting Your Picture Account
Resetting your picture account settings clears the account settings and you
will need to register your picture account again before you can use it.
To reset your picture account:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Reset Picture Account and press
.
4. If you are certain you would like to restore the account to its default
settings, select Yes from the Reset Pic/Video Account? dialog or
No to cancel the operation, and press
.
86
Section 2C: Setting Your Phone’s Security
Resetting Your Favorites
Resetting your favorites restores your favorites to the default states and
deletes any new favorites you may have added. (See “Favorites” on page
71.)
To reset favorites:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Reset Favorite and press
4. If you are certain that you would like to restore all the default
settings, select Yes and press
.
.
Resetting Your Phone’s Settings
Resetting the default settings restores all the default settings to your phone
without deleting any data you may have added, such as entries to your
Contacts list.
To reset your phone:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Reset All Settings and press
.
4. If you are certain that you would like to reset your phone to its
default settings, select Yes from the Default Setting? dialog or No
to cancel the operation, and press
.
Section 2C: Setting Your Phone’s Security
87
Resetting Your Phone
Resetting the phone restores all the factory defaults, including the ringer
types and display settings. This type of reset also deletes any data found
within the Contacts list, special numbers, and pic/video folders.
To reset your phone:
1. Select Menu > Settings > More > Security.
2. Enter your lock code. (The Security menu is displayed.)
3. Select Erase/Reset > Reset Phone and press
.
4. If you are certain that you would like to reset your phone to its
factory settings, select Yes from the Reset the Phone? dialog or
No to cancel the operation, and press
.
88
Section 2C: Setting Your Phone’s Security
Security Features for Sprint Vision
Enabling and Disabling Sprint Vision Services
You can disable Sprint Vision services, including Sprint Power Vision,
without turning off your phone; however, you will not have access to all
Sprint Vision and Sprint Power Vision services, including Web and
messaging. Disabling Sprint Vision will avoid any charges associated with
Vision services. While signed out, you can still place or receive phone calls,
check voicemail, and use other voice services. You may enable Sprint
Vision services again at any time.
To enable Sprint Vision services:
1. Select Menu > Settings > More > Data > On/Off.
(A message will appear.)
2. Select Connect to connect to the Internet during this active session
or Always Auto-Connect to maintain an active connection to the
Internet every time the phone is powered on.
3. Select Yes to enable Sprint Vision and press
.
Enabling or disabling Sprint Vision services will have the same effect on
Sprint Power Vision services in areas with high-speed data coverage.
Note:
To disable Sprint Vision services:
1. Select Menu > Settings > More > Data > On/Off.
(A message will appear.)
2. Read the message and select Next (
).
3. Select Disable Data and press
.
Section 2C: Setting Your Phone’s Security
89
90
Section 2D
Controlling Your Roaming Experience
In This Section
ࡗ ࡗ ࡗ ࡗ Understanding Roaming
Setting Your Phone’s Roam Mode
Using Call Guard
Using Data Roam Guard
Roaming is the ability to make or receive calls when you’re off the
home network. Your new digital dual-band M520 by Samsung works
anywhere on the network and allows you to roam on other 1900 and 800
MHz digital networks where roaming agreements have been implemented.
This section explains how roaming works as well as special features that let
you manage your roaming experience.
Section 2D: Controlling Your Roaming Experience
91
Understanding Roaming
Recognizing the Roaming Icon on the Display Screen
Your phone’s display screen always lets you know when you’re off the
home network. Whenever you are roaming, the phone displays the
roaming icon ( ).
Remember, when you are using your phone off the network, always dial
numbers using 11 digits (1 + area code + number).
Tip:
You may pay a higher per-minute rate for roaming calls.
Note:
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call quality and security will
be similar to the quality you receive when making calls on the home
network. However, you may not be able to access certain features, such as
Sprint Power Vision.
If you’re on a call when you leave the home network, your call is
dropped. If your call is dropped in an area where you think network
service is available, turn your phone off and on again to reconnect to
the home network.
Note:
92
Section 2D: Controlling Your Roaming Experience
Checking for Voicemail Messages While Roaming
When you are roaming off the home network, you may not receive on-
phone notification of new voicemail messages. Callers can still leave
messages, but you will need to periodically check your voicemail for new
messages if you are in a roaming service area for an extended time.
To check your voicemail while roaming:
1. Dial 1 + area code + your wireless phone number.
2. Enter your voicemail passcode at the prompt and follow the
voice prompts.
When you return to the home network, voicemail notification will
resume normally.
Section 2D: Controlling Your Roaming Experience
93
Setting Your Phone’s Roam Mode
Your phone allows you to control your roaming capabilities. By using the
Roaming menu option, you can determine which signals your phone
accepts.
Set Mode
Choose from three different settings on your digital dual-band phone to
control your roaming experience.
To set your phone’s roam mode:
1. Select Menu > Settings > More > Roaming > Set Mode.
2. To select an option, highlight it, and press
.
Ⅲ Automatic seeks network service. When network service is
unavailable, the phone searches for an alternate system.
Ⅲ Roaming only forces the phone to seek a roaming system.
The previous setting (Qwest or Automatic) is restored the next
time the phone is turned on.
prevents roaming on other networks.
94
Section 2D: Controlling Your Roaming Experience
Using Call Guard
Your phone has two ways of alerting you when you are roaming off the
home network: the onscreen roaming icon ( ) and Call Guard. Call Guard
makes it easy to manage your roaming charges by requiring an extra step
before you can place or answer a roaming call. (This additional step is not
required when you make or receive calls while on the network.)
To turn Call Guard on or off:
1. Select Menu > Settings > More > Roaming > Call Guard.
2. Read the message and when prompted, highlight On or Off, and
press
.
.
Speed Dialing is not available when you are roaming with Call Guard
enabled (On).
Note:
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the seven-digit number
and press
2. Press
the call.
To answer incoming roaming calls with Call Guard on:
1. Select Answer ( ).
2. Press on your wireless phone.
.
to confirm the Roaming rate notification and complete
If the Call Guard feature is set to On, you need to take an extra step to
make or receive roaming calls.
Note:
Section 2D: Controlling Your Roaming Experience
95
Using Data Roam Guard
Depending on service availability and roaming agreements, your phone
may be able to access data services while roaming on certain digital
systems. You can set your phone to alert you when you are roaming off the
home network and try to use data services such as messaging.
To turn Data Roam Guard on or off:
1. Select Menu > Settings > More > Roaming > Data Roaming.
2. Highlight Always Ask or Never Ask and press
.
Ⅲ Always Ask turns your phone’s Data Roam Guard feature on.
You will see a prompt and will be required to respond anytime
you access data services while roaming.
Ⅲ Never Ask turns your phone’s Data Roam Guard feature off.
You will not be notified of your roaming status when accessing
data services.
To use data services when Data Roam Guard is active:
ᮣ
When a pop-up notification appears informing you that data roam
96
Section 2D: Controlling Your Roaming Experience
Section 2E
Managing Call History
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Viewing History
Call History Options
Making a Call From Call History
Saving a Phone Number From Call History
Prepending a Phone Number From Call History
Erasing Call History
The Call History keeps track of incoming calls, calls made from
your phone, and missed calls. This section guides you through
accessing and making the most of your Call History.
Section 2E: Managing Call History
97
Viewing History
You’ll find the Call History feature very helpful. It is a list of the last 20
phone numbers (or Contacts entries) for calls you placed, accepted, or
missed. Call History makes redialing a number fast and easy. It is
continually updated as new numbers are added to the beginning of the list
and the oldest entries are removed from the bottom of the list.
Each entry contains the phone number (if it is available) and Contacts entry
name (if the phone number is in your Contacts). Duplicate calls (same
number and type of call) may only appear once on the list.
To view a Call History entry:
1. Select Menu > Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or Recent
Calls and press
.
3. Highlight the entry you wish to view and press
.
98
Section 2E: Managing Call History
Call History Options
For additional information and options on a particular call, highlight a Call
History entry and press
to show the details of the selected call. This
feature displays the date and time of the call, the phone number (if
available), and the caller’s name (if the number is already in your Contacts).
By selecting Options (
), you can then select from among the following
options:
ⅷ
Send Msg to send a Text message or Picture Mail message.
ⅷ
Save to save the number if it is not already in your Contacts. (See
“Saving a Phone Number From Call History” on page 101.)
ⅷ
ⅷ
Prepend to add numbers to the beginning of the selected number.
(See “Prepending a Phone Number From Call History” on page 102.)
Erase to delete the entry.
You can also view the next Call History entry by pressing the navigation
key right or view the previous entry by pressing the navigation key left.
Tip:
Section 2E: Managing Call History
99
Making a Call From Call History
To place a call from Call History:
1. Select Menu > Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or
Recent Calls and press
.
3. Use your navigation key to select a Call History entry and press
.
You cannot make calls from Call History to entries identified as No Caller
ID, Unknown, or Restricted.
Note:
100
Section 2E: Managing Call History
Saving a Phone Number From Call History
Your phone can store up to 500 Contacts entries. Contacts entries can
store up to a total of five phone numbers, and each entry’s name can
contain 20 characters.
To save a phone number from Call History:
1. Use your navigation key to select a Call History entry and select
Options (
2. Select New Entry and press
3. Select a label (such as Mobile, Home, Work, Pager, or Others)
and press
4. Enter a name for the entry using the keypad and
press
) > Save.
.
.
.
5. Select Done (
) to save the new entry to your Contacts list and
exit.
You cannot save phone numbers already in your Contacts or from calls
identified as No Caller ID, Unknown, or Restricted.
Note:
Section 2E: Managing Call History
101
Call History
If you need to make a call from Call History and you happen to be outside
your local area code, you can add the appropriate prefix by prepending the
number.
To prepend a phone number from Call History:
1. Select a Call History entry by selecting either the number or the
name, and press
to show the details of the selected call.
2. Select Options (
) > Prepend.
3. Enter the prefix and select Call (
) .
Erasing Call History
To erase individual Call History entries, see “Call History Options” on
page 99.
To erase the Call History:
1. Select Menu > Call History.
2. Select Missed Calls, Incoming Calls, Outgoing Calls, or Recent
Calls and press
.
3. Select Options (
), select Erase to delete the highlighted entry
or Erase All to delete all entries in the list, and press
.
102
Section 2E: Managing Call History
Section 2F
Using Contacts
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Adding a New Contacts Entry
Finding Contacts Entries
Contacts Entry Options
Adding a Phone Number to a Contacts Entry
Editing a Contacts Entry’s Phone Number
Assigning Speed Dial Numbers
Editing a Contacts Entry
Selecting a Ringer Type for an Entry
Now that you know the basics that make it easier to stay in touch
with people and information, you’re ready to explore your phone’s
more advanced features. This section explains how to use your phone’s
Contacts and helps you make the most of your contacts and time when you
are trying to connect with the important people in your life.
Section 2F: Using Contacts
103
Adding a New Contacts Entry
Your phone’s Contacts list can store up to 500 entries. Contacts entries can
store up to a total of five phone numbers, and each entry’s name can
contain 20 characters.
To add a new entry:
1. Select Menu > Contacts > Add New Entry.
2. Enter a name for the new entry and press the navigation key down.
(See “Entering Text” on page 45.)
3. Enter the phone number for the entry and press
4. Select a label for the entry (Mobile, Home, Work, Pager,
or Others) and press
5. Select Done ( ).
.
.
After you have saved the number, the new Contacts entry is displayed. (See
“Contacts Entry Options” on page 107.)
ICE – In Case of Emergency
Tip:
To make it easier for emergency personnel to identify important
contacts, you can list your local emergency contacts under “ICE” in your
phone’s Contacts list. For example, if your mother is your primary
emergency contact, list her as “ICE–Mom” in your Contacts list. To list
more than one emergency contact, use “ICE1–___,” “ICE2–___,” etc.
104
Section 2F: Using Contacts
Finding Contacts Entries
There are several ways to display your Contacts entries: by name, by speed
dial number, by group, and by voice dial tags. Follow the steps outlined in
the sections below to display entries from the Contacts menu.
Finding Names
To find Contacts entries by name:
1. Select Menu > Contacts > Find.
2. Scroll through all the entries using your navigation key.
– or –
Enter the first letter or letters of a name (such as “Dav” for “Dave”).
(The more letters you enter, the more your search narrows.)
3. To display the details for an entry, highlight it and press
.
4. To dial the entry’s default phone number, press
.
– or –
To display additional Contacts entries, press the navigation key
(
) up or down.
From standby mode, select Contacts (right softkey) to display
the Contacts menu’s Find dialog (shown above).
Shortcut:
Section 2F: Using Contacts
105
Finding Speed Dial Numbers
To find phone numbers you have stored in speed dial locations:
1. Select Menu > Contacts > Speed Dial #s.
2. Scroll through speed dial entries using your navigation key. Speed
dial numbers are displayed in numeric order.
– or –
Enter the number of a speed dial location using your keypad.
3. To display an entry, highlight it and press
.
4. To dial the entry’s default phone number, press
.
Finding Group Entries
To find entries designated as part of a group:
1. Select Menu > Contacts > Groups.
2. Scroll through the group titles using your navigation key. To display
entries belonging to a group, highlight the group and press
.
3. Navigate through the group to find the desired contact.
4. To dial the entry’s default phone number, press
.
106
Section 2F: Using Contacts
Contacts Entry Options
To access a Contacts entry’s options:
1. Highlight the entry and select Options (
) > Edit.
2. Highlight one of the options listed below and press
Ⅲ [Add Photo] to add a photo to the entry.
Ⅲ [Contact Name] to edit the entry name.
.
Ⅲ [Add Number] to add a phone number to the entry.
(See “Adding a Phone Number to a Contacts Entry” on page
108.)
Ⅲ [E-mail] to add an email address to the entry.
Ⅲ [URL] to add a Web site’s URL to the entry.
Ⅲ [Nickname] to add a nickname to the entry.
Ⅲ [Memo] to add a note, street address, or other information.
Ⅲ [Group] to assign the entry to a group.
Ⅲ [Ring] to assign a preprogrammed or downloaded ringer.
You can view the next entry by pressing the navigation key right or view
the previous entry by pressing the navigation key left.
Tip:
Section 2F: Using Contacts
107
Adding a Phone Number to a
Contacts Entry
To add a phone number to an entry:
1. Display a Contacts entry (see “Finding Contacts Entries” on page
105) and press
.
2. Select Options (
) > Edit.
3. Highlight [Add Number], enter the new phone number, and press
.
4. Select a label for the number and press
5. Select Done ( ) to save the new number.
.
Editing a Contacts Entry’s Phone Number
To edit an entry’s phone number:
1. Display a Contacts entry (see “Finding Contacts Entries” on page
105) and press
.
2. Select Options (
) > Edit.
3. Highlight the number you wish to edit and press
.
4. Press
to clear one digit at a time, or press and
to erase the whole number.
hold
5. Re-enter or edit the number and press
6. Select Done ( ) to save the number.
.
108
Section 2F: Using Contacts
Assigning Speed Dial Numbers
Your phone can store up to 99 phone numbers in speed dial locations. For
details on how to make calls using speed dial numbers, see “Using Speed
Dialing” on page 44.
Speed dial numbers can be assigned when you add a new Contacts entry,
when you add a new phone number to an existing entry, or when you edit
an existing number.
To assign a speed dial number to a new phone number:
1. Add a phone number to a new Contacts entry. (See “Adding a New
Contacts Entry” on page 104 or “Adding a Phone Number to a
Contacts Entry” on page 108.)
2. While in the process of creating the new entry, highlight a number
field and select Options (
).
3. Select Speed Dial and press
.
4. Select an available speed dial location and press
5. Select Done ( ) to return to the Contacts menu.
To assign a speed dial number to an existing phone number.
1. Select Contacts ( ) from the standby screen.
.
2. Highlight the entry and select Options (
) > Edit.
3. Highlight the number and select Options (
).
4. Select Speed Dial and press
5. Select an available speed dial location and press
6. Select Done ( ) to return to the Contacts menu.
.
.
If you attempt to assign an already in-use speed dial location to a new
phone number, a dialog will appear asking if you wish to replace the
existing speed dial assignment. Select Yes to assign the location to the
new phone number and delete the previous speed dial assignment.
Note:
Section 2F: Using Contacts
109
Editing a Contacts Entry
To make changes to an entry:
1. Display a Contacts entry (see “Finding Contacts Entries” on page
105) and highlight the name of the person you wish to edit.
2. Select Options (
3. Highlight the part of the entry you wish to edit (Name, Group,
Ringer, etc.) and press
4. Add or edit the desired information and press
5. Select Done ( ) to save your changes.
) > Edit.
.
.
110
Section 2F: Using Contacts
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can identify the
caller by the ringer type. (See “Ringer Types” on page 57.)
To select a ringer type for an entry:
1. Display a Contacts entry, highlight the name of the person you wish
to edit, and press
2. Highlight the current ringer type and select Edit (
3. Select a ringer category and press
.
).
.
4. Use your navigation key to scroll through the available ringers.
(When you highlight a ringer type, a sample of the ring will sound.)
5. Highlight a ringer and press
.
6. Select Done ( ) to save the new ringer type.
Section 2F: Using Contacts
111
112
Section 2G
Using the Phone’s Scheduler and Tools
In This Section
ࡗ ࡗ ࡗ ࡗ Using Your Phone’s Scheduler
Using Your Phone’s Alarm Clock
Using Your Phone’s Memo Pad
Using Your Phone’s Tools
Your phone is equipped with several personal information
This section shows you how to use these features to turn your phone into a
time management planner that helps you keep up with your contacts,
schedules, and commitments. It takes productivity to a whole new level.
Section 2G: Using the Phone’s Scheduler and Tools
113
Using Your Phone’s Scheduler
Adding an Event to the Scheduler
Your Scheduler helps organize your time and reminds you of important
events.
To add an event:
1. Select Menu > Tools > Calendar > Scheduler.
2. Using your navigation key, highlight the day to which you would like
to add an event and press
.
Press the navigation key up or down to scroll by week through the
Scheduler.
Tip:
3. Select Add New (
).
4. Enter a title for the event and select Next (
). (See “Entering
Text” on page 45.)
5. Press the navigation key left or right to select one of the following:
6. Select an alarm time for the event by highlighting the alarm field and
pressing the navigation key left or right to select one of the following:
Ⅲ No Alarm, On Time, 10min before, 30min before, or
1 Hr before.
7. Select a repeating status for the event by highlighting the repeat
field and pressing the navigation key left or right to select one of the
following:
Ⅲ Once, Daily, Weekly, Monthly, or Yearly.
8. Select a ringer type for the alarm by highlighting the ringer field and
pressing
.
Ⅲ Select a ringer category and press
. Press the navigation
key up or down to select the desired ringer and press
.
114
Section 2G: Using the Phone’s Scheduler and Tools
9. Select a time for the event by highlighting the Start time.
Ⅲ Using your keypad, enter the start time and date for the event.
Press
to toggle between AM or PM.
10. Select an end time and date for the event by highlighting the End
time.
Ⅲ Using your keypad, enter the end time and date for the event.
Press
11. Select a contact for the event by highlighting go to Contact and
pressing
Ⅲ Select a contact from the list and press
in the box to indicate that it has been selected. Select Done
).
to toggle between AM or PM.
.
to place a check
(
12. Select Done (
) to save the newly scheduled event and exit.
Event Alerts
There are three ways your phone alerts you to scheduled events:
ⅷ
ⅷ
ⅷ
By playing the assigned ringer type.
By illuminating the backlight.
By blinking the status light.
Event Alert Menu
When your phone is turned on and you have an event alarm scheduled,
your phone alerts you and displays the event summary. To silence the
alarm and reset the schedule, press
.
Section 2G: Using the Phone’s Scheduler and Tools
115
Viewing Events
To view your scheduled events:
1. Select Menu > Tools > Calendar > Scheduler.
2. Using your navigation key, select the day for which you would like to
view events and press
. (If you have events scheduled for the
selected day, they will be listed in chronological order.)
In the Scheduler view, days with events scheduled are highlighted.
Tip:
3. To display the details of an event listed in the schedule, highlight it
and press
.
Going to Today’s Scheduler Menu
To go to the Scheduler menu for today’s date:
ᮣ
Select Menu > Tools > Calendar > Today.
Erasing a Day’s Events
To erase a day’s scheduled events:
1. Select Menu > Tools > Calendar > Scheduler.
2. Using your navigation key, highlight the day for which you would like
to erase events and press
.
In the Scheduler view, days with events scheduled are highlighted.
Tip:
3. Select Options (
you of the number of events to be erased.)
4. Select Yes to confirm or No to cancel, then press
) > Erase All. (An alert will appear notifying
.
116
Section 2G: Using the Phone’s Scheduler and Tools
Using Your Phone’s Alarm Clock
Your phone comes with a built-in alarm clock with multiple alarm
capabilities.
To use the alarm clock:
1. Select Menu > Tools > Alarm.
2. Select Alarm #1, Alarm #2, or Alarm #3 and press
3. Turn the alarm on or off by highlighting the activation field.
.
Ⅲ Press the navigation key left or right to select On or Off.
4. Select a time for the alarm by highlighting the time field.
Ⅲ Use your keypad to enter an alarm time. Press
for AM
or PM.
5. Select a ringer type for the alarm by highlighting the ringer field and
pressing
.
Ⅲ Select the desired ringer category and press
. Press the
navigation key up or down to select the desired ringer and press
.
6. Select a repeating status for the alarm by highlighting the Repeat
field.
Ⅲ Press the navigation key left or right to select Once, Mon to
Fri, Sat & Sun, or Daily.
7. Select a snooze interval for the alarm by highlighting the Snooze
Interval field.
Ⅲ Press the navigation key left or right to select 5 minutes,
10 minutes, 15 minutes, or 20 minutes.
8. Select Done (
).
Section 2G: Using the Phone’s Scheduler and Tools
117
Using Your Phone’s Memo Pad
Your phone comes with a memo pad you can use to compose and store
reminders and notes to help keep you organized.
To compose a note:
1. Select Menu > Tools > Memo Pad.
If there are no memos saved yet, the New Memo screen is automatically
displayed.
Note:
2. Select Add New (
3. Type your note using the numeric keypad and press
Save ( ). (See “Entering Text” on page 45.)
).
or select
To read a saved note:
1. Select Menu > Tools > Memo Pad.
2. Highlight a note and press
.
To delete saved notes:
1. Select Menu > Tools > Memo Pad.
2. Highlight a note and select Options (
3. Select Erase or Erase All and press
).
.
4. Select Yes and press
.
Using Your Phone’s Tools
In addition to helping you be more efficient and organized, your phone
offers useful and entertaining tools. For more information on other Tools
options, refer to:
ⅷ
ⅷ
ⅷ
Bluetooth (See “Using Bluetooth” on page 189.)
Mobile Podcasts (See “Mobile Podcasting” on page 179.)
Voice Memo (See “Managing Voice Memos” on page 139.)
118
Section 2G: Using the Phone’s Scheduler and Tools
Mass Storage
The mass storage feature allows you to connect a USB data cable from
your phone to a computer, manage your files using the file manager, and
check the available memory information. Before connecting, download the
necessary files at http://www.samsungwireless.com/usbdownload.
To access mass storage:
1. Select Menu > Tools > Mass Storage.
2. Choose one of the following:
Ⅲ Connect to PC
Ⅲ File Manager
Ⅲ Format
Ⅲ Memory Info.
Connect to PC
This option allows you to transfer data between your phone and a computer
via a USB data transfer cable.
Section 2G: Using the Phone’s Scheduler and Tools
119
Display
Screen
DEF
MNO
Z
XY
W
ce
Spa
JKL
TUV
t
x
JKL
Ne
Interface
Connector
PQRS
t
Shif
Incorrect
+
To connect the phone to a computer:
1. Plug one end of the USB cable into your Power/Accessory
Interface Connector located on the side of the phone.
2. Connect the other end of the cable to your Computer.
3. Select Menu > Tools > Mass Storage > Connect to PC. Once a
successful connection is established between the two devices, your
phone will appear onscreen as a newly assigned drive letter.
This procedure requires that a compatible memory card be installed
into the phone prior to connection with the computer. (See “Using a
microSD™ Memory Card With Your Phone” on page 29.)
Note:
120
Section 2G: Using the Phone’s Scheduler and Tools
File Manager
This option allows you view the folder and files structure found on the
selected source (Phone or Memory card). This same directory structure can
be viewed from your PC when the Connect to PC option is enabled.
To view the file structure on the phone:
1. Select Menu > Tools > Mass Storage > File Manager.
2. Select Phone and press
. This
reveals a hierarchy of files and folders
currently found on the phone.
3. Use the navigation key to select a folder
or file and then select it by pressing
.
Ⅲ Highlight a folder and
press
to drill down into the
selected folder and reveal any
subfolders or files.
Ⅲ To go back up a level from your current folder location, select
the blue arrow (circled above) and press
.
launch the file in its associated application.
To view the file structure on the Memory Card:
1. Select Menu > Tools > Mass Storage > File Manager.
2. Select Memory card and press
. This reveals a hierarchy of
files and folders currently found on the phone. Refer to step 3 from
the previous section for details on navigation and selection
procedures.
Section 2G: Using the Phone’s Scheduler and Tools
121
Format
This option allows you to format a microSD memory card inserted in your
phone. This action clears all current data stored on the media, such as
Contacts, music, movies, and images.
1. Select Menu > Tools > Mass Storage > Format.
This option can not be used to format the data stored on the phone. You
must have a microSD card in the phone prior to format.
Note:
2. Enter your lock code to display the MMC menu.
3. Select Yes to format the microSD memory card.
– or –
Select No to cancel the format and return to the previous screen.
Memory Info
This option allows you to check the current storage capacity and memory
allocation parameters of either the Phone, Memory card, or both. The
parameters consist of:
ⅷ
Total describes the actual total memory storage size of the selected
media.
ⅷ
ⅷ
Used describes the current amount of memory used.
Available describes the remaining amount of memory that can be
used for data storage.
1. Select Menu > Tools > Mass Storage > Memory Info.
2. Select All, Phone, or Card and press
.
Ⅲ All provides the memory and storage parameters for both the
Phone and Memory card combined.
Ⅲ Phone provides only the memory and storage parameters for
the Phone.
Ⅲ Card provides only the memory and storage parameters for the
Memory card.
3. Select Done (
) to exit and return to the previous screen.
122
Section 2G: Using the Phone’s Scheduler and Tools
Using the Calculator
Your phone comes with a built-in calculator.
To use the calculator:
1. Select Menu > Tools > Calculator.
2. Enter the first numbers using your keypad.
Ⅲ Press the navigation key up for Multiplication (x).
Ⅲ Press the navigation key down for Division (÷).
Ⅲ Press the navigation key left for Subtraction (-).
Ⅲ Press the navigation key right for Addition (+).
Shift
Ⅲ Press
Ⅲ Press
Ⅲ Press
or
for a decimal point.
Space
for a negative number.
to clear all numbers.
3. Enter the second number and press
for Equals (=).
Section 2G: Using the Phone’s Scheduler and Tools
123
Task List
This option allows you to manage daily tasks that include dates, times, and
priority levels.
1. Select Menu > Tools > Calendar > Task List.
If there are no tasks saved, the New Task screen is automatically
displayed.
Note:
2. Select Add New (
3. Enter the task name using the keypad and press
or select Next ( ).
).
4. Select a Priority level by highlighting the Priority field.
Ⅲ Press the navigation key left or right to select Low
or High.
5. Select a due time by highlighting the Due Time field.
Ⅲ Using the keypad, enter the time the task is due.
Press
for AM or PM.
6. Select a due date by highlighting the Due Date field.
Ⅲ Using the keypad, enter the date the task is due.
7. Select Done (
) to save and exit.
124
Section 2G: Using the Phone’s Scheduler and Tools
Countdown
This option allows you to enter a timer that counts down to an event based
on a date and time specified.
1. Select Menu > Tools > Calendar > Countdown.
If there are no countdowns saved, the New Countdown screen is
automatically displayed.
Note:
2. Enter the countdown name using the keypad and press
select Next ( ).
or
3. Select a time by highlighting the Time field.
Ⅲ Using the keypad, enter the time of the countdown.
Press
to toggle between AM or PM.
4. Select a date by highlighting the Date field.
Ⅲ Using the keypad, enter the date of the countdown.
5. Select Done (
) to save and exit.
World Time
To view the time in 48 different locations:
1. Select Menu > Tools > World Time.
2. Press the navigation key left or right to scroll through different cities
and time zones.
3. Select Set DST (
) to turn Daylight Saving Time On or Off.
Section 2G: Using the Phone’s Scheduler and Tools
125
126
Section 2H
Using Your Phone’s Voice Services
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Using Voice-Activated Dialing
Using Call <Name or #>
Using Send Email <Name>
Using Send Text <Name or #>
Using Lookup <Name>
Using Go To <App>
Using Check <Item>
Managing Voice Memos
Your phone’s Voice Services let you place calls using your voice,
store voice reminders, and record memos right on your phone. This
section includes easy-to-follow instructions on using voice-activated dialing
and managing voice memos.
Section 2H: Using Your Phone’s Voice Services
127
Using Voice-Activated Dialing
Voice recognition software allows you to say commands to perform
common functions supported by your phone. There is no voice training
required to use the voice recognition feature. You simply say the
predesignated command displayed on your screen in a normal tone of
voice to perform the desired function.
To activate voice recognition:
1. Press and hold
. (The phone prompts you to say a command.)
2. Wait for the beep and then say one of the following commands:
Ⅲ Call <Name or #>
Ⅲ Send Text <Name or #>
Ⅲ Send Email <Name>
Ⅲ Lookup <Name>
Ⅲ Go To <App>
Ⅲ Check <Item>
When it recognizes one of these commands, the phone takes the
corresponding action. If the phone does not hear a command within
approximately eight seconds, it deactivates voice recognition without taking
any action.
Using Voice Launch
Voice Launch allows you to configure how to launch voice-activated dialing.
To access voice launch:
1. Select Menu > Tools > Voice Services.
2. Select Settings (
).
3. Select Voice Launch and press
.
4. Select Talk Key or Talk Key & Slide Up and press
.
128
Section 2H: Using Your Phone’s Voice Services
Using Call <Name or #>
You can voice dial from your phone with a single command by saying
“Call” followed by a name or nickname (see “Calling Nicknames” on
page 130) and (optionally) a label stored in your Contacts list; or say “Call”
followed by a valid phone number. You can also say “Call” by itself and be
prompted for the name or number.
Calling Contacts Entries
To place a call using Call <Name or #>:
1. Press and hold
.
2. Say “Call” followed by the name and the label for the number you
wish to call. For example, say “Call John Mobile.” The phone dials
the number stored for the contact “John” with the label “Mobile.”
If the location recognized for the name does not have a number stored in
Contacts, your phone will play the message “No number available, John
Smith, Mobile,” and then launch the Contacts application for that name.
If a name has only a single number, or if you know the name but are not
sure which number to call, say “Call” followed by the name only. For
example, say “Call John.” If the name is recognized and there is only one
number for the name, your phone immediately places the call. If there are
multiple numbers stored for the contact, the phone prompts you with
“Which Number?” and displays a list of options. You can select an option
by saying it or by using your keypad.
Section 2H: Using Your Phone’s Voice Services
129
Calling Nicknames
Your Contacts list incorporates a field called “Nickname.” When you add a
nickname to a contact, you can say the contact’s name or nickname when
using the voice features. For example, if you have a contact, “John Smith”
stored in your Contacts list, and you add, “Dad” to the nickname field, you
can call that contact by saying, “Call John Smith” or by saying “Call
Dad.”
If your Contacts list contains a name that you have difficulty using with
the voice features (such as some unusual or foreign names), you can
add a nickname for that contact that spells out the proper pronunciation
of that name.
Tip:
130
Section 2H: Using Your Phone’s Voice Services
Calling Phone Numbers (Digit Dialing)
To voice dial a number that is not stored in your Contacts list:
1. Press and hold
.
2. Say “Call” followed immediately by a valid string of digits to be
dialed, for example, say “Call 555 555 5555.”
3. If the correct number is repeated, say “Yes” to dial the number.
Speak naturally and clearly and remember to speak one digit at a time. For
example, 1-800 should be pronounced “One Eight Zero Zero.”
Adapting Digit Dial
Digit Dialing is speaker independent, which means that no training or
adaptation is required. Some users with heavy accents or unusual voice
characteristics may find difficulty in achieving high accuracy with speaker-
independent Digit Dialing, so the Adapt Digits feature allows users to
dramatically improve the digit accuracy through adaptation. Users who get
acceptable digit recognition accuracy will find no additional benefit to
performing the Adapt Digit adaptation.
After you adapt Digit Dial, your phone will be customized to your voice.
Other people will not be able to use Digit Dial on your phone unless they
reset the phone to factory defaults.
ONLY adapt Digit Dial if the system is frequently misrecognizing your
speech. You can always restore the system to its original factory setting.
Note:
Adaptation involves recording several digit sequences to teach the system
your voice. The adaptation process takes about three minutes.
Section 2H: Using Your Phone’s Voice Services
131
Tips for adapting Digit Dial:
ⅷ
ⅷ
ⅷ
ⅷ
Adapt digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, but say each digit sequence naturally.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, you can say or select
“No” when the prompt asks, “Did the recording sound OK?” You
will then be prompted to rerecord the sequence.
To adapt Digit Dial to your voice:
1. Select Menu > Tools > Voice Services.
2. Select Settings (
).
3. Select Digit Dialing and press
.
.
4. Select Adapt Digits and press
5. Select OK (
digit sequence.)
) to begin the process. (The phone displays the first
6. Wait for the beep, and then repeat the digits using a normal tone of
voice. (The phone plays back your the first set of digits and asks
“Did the recording sound OK?”)
Ⅲ If the recording is acceptable (no mistakes and no background
noises), say “Yes” or press
Ⅲ If you need to rerecord the digits to fix any problems, say “No”
or press . (The phone then prompts you to say the digits
.
again.) Wait for the beep, and then record the digits again.
(Repeat this step until you are satisfied with the recording.)
7. After confirming that the recording is acceptable, repeat the
recording process with the next set of digits.
8. Repeat steps 6 and 7 for an additional nine sets of digits.
9. When you are finished with a full session, you will reach a screen
that reads, “Adaptation Complete.” You can either allow the screen
to time out or press OK (
) to return to the main standby screen.
132
Section 2H: Using Your Phone’s Voice Services
It is recommended that you perform the complete adaptation of Digit
Dial at least once to achieve the maximum benefit of this feature. If a
partial adaptation is performed, you can always return later and resume
the process from the halfway point.
Note:
Resetting Digit Dial Adaptation
1. Select Menu > Tools > Voice Services.
2. Select Settings (
).
3. Select Digit Dialing and press
.
4. Select Reset Digits and press
.
5. Select OK (
).
Using Choice Lists
If your phone is not confident it has recognized a name or number correctly,
it might display a choice list and prompt you with “Call?” followed by the
first choice on the list. To confirm the choice, say “Yes,” or to hear the next
choice, say “No.” You can also select the correct choice using your keypad.
To cancel the command, say “Cancel,” or to say the name or number
again, say “Repeat.”
Enabling/Disabling Choice Lists
You can customize whether the Voice Recognition feature displays either a
list of top voice recognition choices or automatically dials the first number
without displaying a choice list.
To enable or disable choice lists for Digit Dial:
1. Select Menu > Tools > Voice Services > Settings (
2. Select Choice Lists and press
3. Select Automatic, Always On, or Always Off and
press
).
.
.
Section 2H: Using Your Phone’s Voice Services
133
Using Send Email <Name>
With a single voice command you can launch the email message client on
the phone and specify a recipient for the email message. An email address
must be associated with a Contacts entry. If there is no email address
registered, the screen will prompt you to add a new email address to the
Contacts entry.
To send an email message:
1. Press and hold
on your wireless phone.
2. Say “Send Email” followed immediately by the name of a person in
your Contacts list. For example, say “Send Email John Smith.”
If you say “Send” without specifying a recipient, your phone prompts you
with a list of possible matching items.
When you start an email message through voice activation, the email
message opens in Voice Mode automatically.
Note:
3. Use the phone’s keypad to enter text and select Next (
4. Select Send ( ) to complete the process.
).
134
Section 2H: Using Your Phone’s Voice Services
Using Send Text <Name or #>
With a single voice command you can launch the text message client on
the phone and specify a recipient for the message.
To launch a text message:
1. Press and hold
on your wireless phone.
2. Say “Send Text” followed immediately by the name of a person in
your Contacts list and, optionally, the type of number you want to
send it to. For example, say
“Send Text John Smith.”
If you do not specify the number type and there are multiple numbers for
the name, your phone chooses the mobile number by default.
If you say “Send” without specifying a recipient, your phone prompts you
with “Say the name.” Say the name of a person in your Contacts list and,
optionally, the type of number.
When you start a text message through voice activation, the message
opens in Voice Mode automatically.
Note:
3. Use the phone’s keypad to enter text and select Next (
4. Select Send ( ) to complete the process.
).
Section 2H: Using Your Phone’s Voice Services
135
Using Lookup <Name>
You can look up and display contact information for any person stored in
your Contacts list by saying “Lookup,” followed by the name.
To use Lookup <Name>:
1. Press and hold
on your wireless phone.
2. Say “Lookup John Smith.” The entry information for the specified
contact is displayed.
If you say only “Lookup,” your phone prompts you with “Say the name.”
Using Go To <App>
You can open an application or access a menu by saying
“Go To” followed immediately by the destination (either an application or a
menu).
To see a list of possible destinations:
1. Press and hold
on your wireless phone.
2. Say “Go To” by itself. A list of valid destinations is displayed and you
are prompted with “Please Choose.” If the list is too long to fit on
one screen, the screen displays “Next Menu.” You can say the
name of a destination, or say “Next Menu” to view the next screen.
136
Section 2H: Using Your Phone’s Voice Services
Using Check <Item>
You can display specific phone-related information by saying
“Check” followed immediately by the inquiry, such as:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Status
Battery
Signal
Network
My Phone #
To retrieve your phone's status information:
1. Press and hold
on your wireless phone. (The phone prompts
you to say a voice command.)
2. Wait for the beep and say “Check Status” (The following is an
outline of the phone status responses.)
Ⅲ Battery:
ࡗ High - Number of bars displayed in the battery icon is 3. ࡗ Medium - Number of bars displayed in the battery icon is 2. ࡗ Low - Number of bars displayed in the battery icon is 1. ࡗ Empty - Low battery alert. Ⅲ Signal Strength:
ࡗ High - Number of bars displayed is 4 or more. ࡗ Good - Number of bars displayed is 2/3. ࡗ Low - Number of bars displayed is 0/1. ࡗ No Signal - Phone is scanning for system. Ⅲ Coverage:
ࡗ No Coverage - When phone is scanning. ࡗ Provider Coverage - Phone is on a non-roam system. ࡗ Digital Roam - Phone is on a digital roam system. Section 2H: Using Your Phone’s Voice Services
137
To retrieve your phone's battery charge information:
1. Press and hold
on your wireless phone. (The phone prompts
you to say a voice command.)
2. Wait for the beep and say “Check Battery” (The onscreen display
outlines the current battery status information [page 137].)
To retrieve your phone's signal strength information:
1. Press and hold
on your wireless phone. (The phone prompts
you to say a voice command.)
2. Wait for the beep and say “Check Signal” (The onscreen display
outlines the current signal strength information [page 137].)
To retrieve your phone's network coverage information:
1. Press and hold
on your wireless phone. (The phone prompts
you to say a voice command.)
2. Wait for the beep and say “Check Network” (The onscreen display
outlines the current network coverage information [page 137].)
My Phone Number
You can use your phone’s Voice Services to hear and display your phone
number onscreen.
Getting Your Phone Number
To access your phone number:
1. Press and hold
on your wireless phone. (The phone prompts
you to say a voice command.)
2. Wait for the beep and say “Check My Phone Number” (The
onscreen display provides you with the your phone number
information.)
138
Section 2H: Using Your Phone’s Voice Services
Managing Voice Memos
You can use your phone’s Voice Services to record brief memos to remind
you of important events, phone numbers, or grocery list items.
Recording Voice Memos
To record a voice memo:
1. Select Menu > Tools > Voice Memo > Record.
2. Begin recording after the prompt.
To end the recording of your memo:
ᮣ
Press
or select Finish (
).
To review the recorded memo:
ᮣ
Select Review (
).
Your phone can store a total of 10 one-minute memos.
Note:
To record the other party during a phone call:
1. During a call, select Options > Voice Memo.
(A one-minute counter [
] is displayed on the screen indicating
the amount of time a single voice memo can be recorded.)
2. To pause the memo, select Pause (
select Resume ( ).
3. To finish recording, select Done (
). To resume the recording,
).
Your voice is not recorded during this process. The only recorded voice
is that of the other party.
Note:
Section 2H: Using Your Phone’s Voice Services
139
Reviewing Voice Memos
To play the voice memos you have recorded:
1. Select Menu > Tools > Voice Memo > Review.
(The phone displays a list of saved memos, with the first one
selected.)
2. Highlight the desired memo and press
.
— or —
Press the number corresponding to the memo you want to review.
Voice Memos recorded from a direct phone conversation are shown in
the list with the phone number used during the recording process and
an adjacent phone icon.
Note:
Erasing Voice Memos
To erase an individual memo:
1. Select Menu > Tools > Voice Memo.
2. Select Review (
) and press
.
3. Highlight the desired memo.
4. Select Options (
) > Erase.
5. Select Yes and select OK (
To erase all voice memos:
).
1. Select Menu > Tools > Voice Memo > Erase All.
2. Select Yes and press
.
140
Section 2H: Using Your Phone’s Voice Services
Editing a Voice Memo Caption
By default, the caption assigned to a voice memo is a sequential file name
which consists of the date (Month_Day) followed by the memo number. For
example, two memos recorded on March 7, 2007, would be listed as:
Mar_07x1 and Mar_07x2. These file names (captions) can be changed.
In the case of a Voice Memo recorded from a direct phone
conversation, the filename consists of the phone number used during
the recording process.
Note:
To edit a voice memo caption:
1. Select Menu > Tools > Voice Memo.
2. Select Review (
) and press
. (The phone displays a list of
saved memos, with the first one selected.)
3. Highlight the desired memo.
4. Select Options (
5. Press to delete the previous text and then use the keypad to
enter a new caption for the selected memo.
) > Edit Caption.
6. Select Done (
) or press
to save the memo with the new
caption text.
Viewing the Information for a Voice Memo
To view the information for a recorded voice memo:
1. Select Menu > Tools > Voice Memo.
2. Select Review and press
. (The phone displays a list of saved
memos, with the first one selected.)
3. Highlight the desired memo.
4. Select Options (
) > Info.
Section 2H: Using Your Phone’s Voice Services
141
142
Section 2I
Using the Built-in Camera
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Taking Pictures
Recording Videos
Storing Pictures and Videos
Sending Sprint Picture Mail
Managing Sprint Picture Mail
Printing Pictures Using PictBridge
Settings and Info
Your phone’s built-in camera gives you the ability to take
full-color digital pictures, view your pictures using the phone’s
display, and instantly send them to family and friends. It’s fun and as
easy to use as a traditional point-and-click camera: just take a picture, view
it on your phone’s display, and send it from your phone to up to 25 people.
This section explains the features and options of your phone’s built-in
camera.
Section 2I: Using the Built-in Camera
143
Taking Pictures
Taking pictures with your phone’s built-in camera is as simple as choosing
a subject, pointing the lens, and pressing a button.
To take a picture with the phone open:
1. Expose the built-in camera by sliding the phone upwards. (This
reveals the 1.3 megapixel camera.)
2. Select Menu > Pictures > Camera. (Additional camera options are
available through the camera mode’s Options menu. See “Camera
Mode Options” on page 146 for more information.)
To activate camera mode, you can also press the camera key
(see illustration on page 15).
Shortcut:
3. Use the phone’s display screen as a viewfinder and aim the camera
lens at your subject.
4. Select Capture (
) or press
to capture the image. (The
picture will automatically be saved to the selected folder.) (See
“Media Storage Settings” on page 153.)
Ⅲ To return to camera mode to take another picture, press the
camera key.
5. Press
for Options:
Ⅲ Send Msg to send the picture to up to 25 contacts at one time.
(See page 157 for details.)
Ⅲ Camera to return to the camera to take additional pictures.
settings, you may be prompted to accept a Sprint Vision
connection.
Ⅲ Assign to assign the picture as a Picture ID, Screen Saver, or
Incoming Call.
Ⅲ Erase to delete the picture you just took.
Ⅲ Review Albums to go to the In Phone folder to review your
saved pictures.
144
Section 2I: Using the Built-in Camera
Creating Your Sprint Picture Mail Password
The first time you use any of the picture management options involving the
Sprint Picture Mail Web site, you will need to establish a Sprint Picture Mail
password through your phone.
This password will also allow you to sign in to the Sprint Picture Mail Web
pictures and albums.
To create your Sprint Picture Mail password:
1. Select Menu > Pictures > My Albums > Online Albums. (You
will be prompted to create a Sprint Picture Mail password.)
2. Enter your password and press
. (You will be prompted to
confirm your password.)
3. Please wait while the system creates your account.
4. Complete the process by pressing Done ( ).
Write down your Sprint Picture Mail password in a secure place.
Note:
Once you have received confirmation that your account has been
successfully registered, you may upload and share pictures and access the
Sprint Picture Mail Web site.
To set up your phone for Picture Mail delivery:
1. Select Menu > Messaging > Send Message > Picture Mail and
press
2. When the “Please register your Picture Mail account now”
screen appears, select Continue ( ).
.
3. Select Connect to connect to the Internet during this active session
or Always Auto-Connect to maintain an active connection to the
Internet every time the phone is powered on.
4. Enter your password used during the registration process
(page 145) and press Done (
).
Section 2I: Using the Built-in Camera
145
Camera Mode Options
When the phone is open and in camera mode, select Options (
) to
display additional camera options:
ⅷ
ⅷ
Self-Timer to activate the camera’s timer. (See “Setting the Camera
Self-Timer” on page 147.)
Fun Tools.. to select from the following options:
Ⅲ Fun Frames to select your favorite fun picture frame to
Bean, or Birthday). (The default setting is None).
Ⅲ Color Tones to select a wide variety of color tones for the
picture (None, Monochrome, Sepia, Green, Aqua, or
ⅷ
Controls.. to select from the following options:
navigation key up (increase) or down (decrease) to adjust the
setting. (The default setting is 0).
Ⅲ White Balance to adjust white balance based on changing
Manual). (The default setting is Auto).
Ⅲ Night Shot to activate low light image capture. Enabling this
feature allows you to take better quality photos in low light
conditions.
ⅷ
ⅷ
Settings to select Resolution, Quality, Shutter Sound, Status Bar,
or Storage. (See “Selecting Camera Settings” on page 148 for
details.)
Launch to select from the following options:
Ⅲ Review Pictures (to go to your phone’s In Phone folder, see “In
Phone Folder” on page 154 for details.)
Ⅲ Camcorder (to switch to Video mode, see “Recording Videos”
on page 149 for details.)
146
Section 2I: Using the Built-in Camera
Setting the Camera Self-Timer
To activate the self-timer:
1. From camera mode, select Options (
).
2. Select Self-Timer, highlight a value, and press
.
3. Highlight the length of delay you want the timer to use (5 sec or 10
sec) and press
. (The default setting is Off.)
4. Select Capture (
) when you are ready to start the timer.
5. Get ready for the picture. (When the timer is started, the phone will
initiate a corresponding number of audible beeps that sound off
every second to indicate a countdown).
To cancel the self-timer after it has started:
ᮣ
Press
.
Using the Zoom
This feature allows you to zoom in on an object when you take a picture.
1. Press the navigation key right (zoom in) or left (zoom out). Depending
on your resolution settings, you can adjust the zoom up to four
levels.
Zooming is unavailable when the image resolution is set to
1.3 MP:960*1280 pixels.
Note:
To use the zoom:
1. From camera mode, repeatedly press the navigation key left to zoom
out and right to zoom in. It may take several presses to get the
desired zoom.
2. Select Capture (
) to take the picture. (The picture will
automatically be saved in the In Phone folder.)
Section 2I: Using the Built-in Camera
147
Selecting Camera Settings
To select your camera settings:
1. From camera mode, select Options (
).
2. Select Settings... and press
.
3. Select one of the following options and press
.
Ⅲ Resolution to select a picture’s file size
(1.3M, High, Med, or Low).
Ⅲ Quality to select the picture quality setting (Fine, Normal, or
Economy).
Ⅲ Shutter Sound to select a shutter sound (Off, Shutter1–3, or
Say Cheese).
Ⅲ Status Bar to turn the status bar On (Show) or Off (Hide) when
in camera mode.
Ⅲ Storage to select the destination for the image files (Phone or
Card).
Viewing Your Camera’s Status Area Display
Magnification
Image Saved/Remaining
0
1
Status
Bar
+
Display
Image
+
-
Camera
Options
Capture
Capture
Options
148
Section 2I: Using the Built-in Camera
Recording Videos
In addition to taking pictures, you can also record, view, and send videos to
your friends and family with your phone’s built-in video camera.
To record a video:
1. Select Menu > Pictures > Camcorder.
2. Select Video Mail or Long Video and press
.
Video Mail can be at most 30 seconds in length, but the length of a
Long Video is dependent on both the quality settings and storage media
being used (phone or memory card).
Note:
3. Using the phone’s display screen as a viewfinder, aim the lens at
your subject.
4. Select Record (
) to begin recording.
5. Select Done (
) to stop recording. (The video will automatically
be saved to the selected folder.)
Ⅲ To return to camera mode to take another video, press
.
6. Select Next (
) and select from one of the following options:
Ⅲ Send Msg to send the video. (See page 157 for details.)
Ⅲ Play to play the video that was just captured.
Ⅲ Upload to upload the video to online albums.
Ⅲ Assign to assign the video as a video ringer or to voice calls.
Ⅲ Erase to delete the video.
Ⅲ Camcorder to return to camcorder mode.
Ⅲ Review Albums to review all pictures and videos saved in the
In Phone folder.
Section 2I: Using the Built-in Camera
149
Video Mode Options
When the phone is open and in camcorder mode, select Options (
) to
display additional camcorder options:
ⅷ
ⅷ
Self-Timer to activate the timer. (See “Setting the Camera Self-
Timer” on page 147.)
Color Tones to select a wide variety of color tones for the picture
(Auto, Monochrome, Sepia, Green, Aqua, or Negative). (The
default setting is Auto.)
ⅷ
Controls.. to select from the following options:
navigation key right (increase) or left (decrease) to select a
setting. (The default setting is 0).
Ⅲ White Balance to adjust white balance based on changing
conditions. Select from Auto, Sunny, Cloudy, Tungsten,
Fluorescent, or Manual. (The default setting is Auto.)
Ⅲ Night Shot to activate low light image capture. Enabling this
feature allows you to take better quality videos in low light
conditions.
ⅷ
Settings.. to select from the following options:
Ⅲ Quality to select between Fine, Normal, or Economy.
Ⅲ Save Video To to select the destination for the video files
(Phone or Memory Card).
ⅷ
ⅷ
Review Albums to display the videos saved in the In Phone folder.
(See “In Phone Folder” on page 154 for details.)
Camera to switch to Camera mode. (See “Taking Pictures” on page
144 for details.)
150
Section 2I: Using the Built-in Camera
Viewing Your Camcorder’s Status Area Display
Resolution
Magnification
Video Storage Remaining
Status Bar
Fine
X1
Balance
Storage
Location
Display
Image
Record
Length
00/30s
Camcorder
Options
Record
Options
Record
Setting the Camcorder Self-timer
The self-timer function operates the same as it does in Camera mode. (See
“Setting the Camera Self-Timer” on page 147.)
Section 2I: Using the Built-in Camera
151
Selecting Video Settings
To select your camcorder settings:
1. From camcorder mode, select Options (
).
2. Highlight Settings and press
.
3. From each of the following options, make your selection and press
.
Ⅲ Quality to select the video quality setting (Fine, Normal, or
Economy).
Ⅲ Save Video To to select the destination for the video files
(Phone or Memory Card).
152
Section 2I: Using the Built-in Camera
Storing Pictures and Videos
Your phone’s picture storage area is called My Albums. There are three
storage locations that can be used separately according to your needs:
ⅷ
ⅷ
ⅷ
In Phone (See “In Phone Folder” on page 154)
Memory Card (See “Memory Card” on page 155.)
Online Albums (See “Online Albums” on page 156.)
Media Storage Settings
You can assign a default storage area for new pictures and videos. These
settings will remain in effect until changed by you, unless the available
media storage changes (for example, you remove or switch the microSD
card) or the phone is reset.
To assign picture and video storage settings:
1. Select Menu > Pictures > Settings and Info.
2. Select Auto Save To and press
.
3. Select either Phone (In Phone folder) or Memory Card and press
.
Ⅲ If there is no memory card installed within the phone, any
photos or videos are stored within the default In Phone folder.
Ⅲ If there is a memory card installed, any photos or videos are
stored in the Memory Card folder.
Section 2I: Using the Built-in Camera
153
In Phone Folder
From the In Phone folder, you can view all of the pictures you have taken,
store selected images in your phone, send pictures to the Sprint Picture
additional picture options.
If the Auto Save to feature was previously setup to store images/video
onto an internal memory card, this target folder becomes the Memory
Card folder.
Note:
To review your stored pictures in the In Phone folder:
1. Select Menu > Pictures > My Albums > In Phone.
2. Use your navigation key to view and scroll through the pictures.
In Phone Folder Options
When you are viewing the contents of the In Phone folder, select Options
(
) to display the following file type options:
ⅷ
ⅷ
Play to play the video that was just captured.
Send to send an image or video to another user using picture mail or
to a Bluetooth-enabled printer.
ⅷ
Upload to upload pictures or videos from the In Phone folder to the
on your settings, you may be prompted to accept a Sprint Vision
connection.
If this is the first time you have accessed the Sprint Picture Mail
account, you will be prompted to create your Sprint Picture Mail
Password. See “Creating Your Sprint Picture Mail Password” on page
145.
Note:
ⅷ
Assign to assign either the current image or video as:
Ⅲ Image: Picture ID, Screen Saver, or Incoming Call
Ⅲ Video: Video Ringer or Voice Calls.
154
Section 2I: Using the Built-in Camera
ⅷ
ⅷ
Erase to erase the image or selected images.
Copy/Move to copy or move an image or video to an installed
memory card.
ⅷ
Detail/Edit to attach a text caption or view the media information
associated with the image.
ⅷ
ⅷ
Album list to display the list of albums saved in your phone.
Media Filter to filter images only or videos only, or to display all media
types.
ⅷ
ⅷ
Camera to switch back to camera mode.
Memory Card
If you have selected Memory Card as your Auto Save To
location, your pictures will be automatically saved to your Memory Card
taken, store selected images in your In Phone folder, send pictures to the
and access additional picture options.
To review your stored pictures in the Memory Card folder:
1. Select Menu > Pictures > My Albums > Memory Card.
2. Use your navigation key to view and scroll through the pictures.
Memory Card Options
When you are viewing the Memory Card folder, select Options (
display options. These options are the same as the “In Phone Folder
Options” on page 154.
) to
Section 2I: Using the Built-in Camera
155
Online Albums
Alternatively you can save pictures to your Online Albums folder. From the
Online Albums folder, you can view all of the pictures you have taken, store
selected images in your In Phone folder, delete images, and access
additional picture options.
Before you can use the Online Albums feature, you must first go online
and create a Picture Mail account and password. (See “Creating Your
Sprint Picture Mail Password” on page 145).
Note:
To review your stored pictures in the Online Albums folder:
1. Select Menu > Pictures > My Albums > Online Albums.
2. Use your navigation key to view and scroll through the pictures.
Online Albums Options
When you are viewing the Online Albums folder, select Options (
display Online Albums options. These options are the same as the
“In Phone Folder Options” on page 154.
) to
156
Section 2I: Using the Built-in Camera
Sending Sprint Picture Mail
Once you’ve taken a picture or video, you can use the messaging
capabilities of your phone to instantly share it with family and friends. You
can send a picture to up to 25 people at a time using their email addresses
or their wireless phone numbers.
Sending Pictures From the In Phone Folder
To send pictures from the In Phone folder:
1. Select Menu > Pictures > My Albums > In Phone.
2. Highlight a picture you wish to send and press
.
(The check box in the upper left corner of the picture will be marked.
You can select multiple pictures.)
3. Select Options (
) > Send.
4. Select To Contacts and press
.
The first time you send Sprint Picture Mail, you will be prompted to
establish an account via the Sprint Picture Mail Web site. (See “Creating
Your Sprint Picture Mail Password” on page 145.)
Note:
5. Select a contact or enter a mobile number or an email address using
the keypad, and select OK ( ).
6. Enter additional recipients or select Next (
7. If you wish to include a subject, scroll to Subj. and select Add
). Enter your subject using the keypad and select Next (
to save and exit.
8. If you wish to include a text message, scroll to Text and select Add
) to continue.
(
)
(
[
(
). Enter your message using your keypad (or select Options
] to select from Preset Msg or Recent Msg) and select Next
) to save and exit. (See “Entering Text” on page 45.)
9. If you wish to include an audio message with the picture, highlight
the box next to Audio and select Record ( ). Select Record
) to start recording. (Maximum recording time is 10 seconds.)
(
Section 2I: Using the Built-in Camera
157
10. Confirm the recipients, message, audio message, and picture.
Ⅲ To change a recipient, highlight the recipient, press the
appropriate softkey, and follow the instructions in step 5 to
select or edit the recipient.
Ⅲ To change the text message, scroll to Text and press the
appropriate softkey.
Ⅲ To change the voice memo, highlight the box next to Audio,
select Review, and select Re-Record under Options.
Ⅲ To change the attached picture(s), select the thumbnail picture
and press Change (
11. Select Send ( ) to send the picture. If you are notified that “Your
message is being sent,” select Continue ( ) to complete the
process of sending the picture.
). Select In Phone > Next (
).
158
Section 2I: Using the Built-in Camera
Sending Pictures From Messaging
You can also send Sprint Picture Mail from your phone’s Messaging menu.
To send pictures from the Messaging menu:
2. Select a contact or enter a mobile number or an email address using
the keypad and select OK (
).
3. Enter additional recipients or select Next (
) to continue.
Ⅲ In Phone
Ⅲ Memory Card
Ⅲ Online Albums
Ⅲ Take New Picture
Ⅲ Take New Video
Ⅲ Text Only
5. Display the picture you wish to send and press
. (You can select
multiple pictures.)
6. Select Next (
) to continue.
7. Complete the process by following steps 7–11 in “Sending Pictures
From the In Phone Folder” on page 157.
To take and send a new picture from Messaging, select Take New
Picture during step 4 above, take the new picture, select Capture (left
softkey), and follow steps 7-11 in “Sending Pictures From the In Phone
Folder” on page 157.
Tip:
Section 2I: Using the Built-in Camera
159
Managing Sprint Picture Mail
Using the Sprint Picture Mail Web Site
Once you have uploaded pictures from your phone to your online Sprint
Options” on page 154), you can use your computer to manage your
pictures. From the Sprint Picture Mail Web site (https://
pictures.qwest.com) you can share pictures, edit album titles, add
captions, and organize images. You can even send your pictures to be
printed at participating retail locations.
You will also have access to picture management tools to improve and
customize your pictures. You’ll be able to lighten, darken, crop, add antique
effects, add comic bubbles and cartoon effects, and use other features to
transform your pictures.
To access the Sprint Picture Mail Web site:
(See “Creating Your Sprint Picture Mail Password” on page 145.)
160
Section 2I: Using the Built-in Camera
Managing Online Pictures and Videos From
Your Phone
You can use your phone to manage, edit, or share pictures you have
(See “In Phone Folder Options” on page 154 for information about
uploading.)
To view your online pictures from your phone:
1. Select Menu > Pictures > My Albums > Online Albums.
(Depending on your settings you may be prompted to accept a Sprint
Vision connection.) (The Uploads folder and your albums appear.)
2. Highlight Uploads or an album title and press
to display
thumbnail images (up to four per screen).
To expand a selected picture from thumbnail to full-screen, select
Expand.
Tip:
3. Use your navigation key to select a picture.
4. Select Options (
) to display your online picture options.
Uploading Pictures
To upload pictures:
1. Select Menu > Pictures > My Albums (Thumbnail pictures will be
displayed.)
2. Select In Phone or Memory Card and press
3. Select the picture(s) you wish to upload and select Options (
.
).
4. Select Upload and choose My Albums or My Uploads and press
.
5. Select Continue (
) to start uploading.
Section 2I: Using the Built-in Camera
161
Downloading Your Online Pictures
pictures.qwest.com, you can select pictures to download
to your phone.
To download pictures from the Sprint Picture Mail Web site:
1. From the online pictures display, select the picture you wish to
download and select Options (
).
(See “Managing Online Pictures and Videos From Your Phone” on
page 161.)
2. Highlight Assign and press
.
3. Select one of the following options and press
.
Ⅲ Picture ID to download and assign the selected picture as a
Picture ID.
Ⅲ Screen Saver to download and assign the selected picture as
a screen saver.
Ⅲ Incoming Calls to download a picture and assign to incoming
calls with or without caller ID.
162
Section 2I: Using the Built-in Camera
Accessing Online Picture Options From Your Phone
1. Select a picture from your online Picture Mail. (See “Managing
Online Pictures and Videos From Your Phone” on page 161.)
2. Select Options (
) to display options.
3. To select an option, highlight it and press
.
Ⅲ Copy/Move to copy or move pictures to a selected album:
ࡗ Copy This to copy the selected picture to the album. ࡗ Copy All to copy all pictures in the current album (or Inbox) to the target album.
ࡗ Move This to move the selected picture to the album. ࡗ Move All to move all pictures in the current album (or Inbox) to the target album.
Ⅲ Save to to copy the selected picture to either your Phone or
Memory card folder. (See “Media Storage Settings” on page
153.)
Ⅲ Erase to select Erase Selection or Erase All to erase a single
picture or all pictures saved in the current album (or Inbox).
Ⅲ Expand (
) to expand the selected picture.
Section 2I: Using the Built-in Camera
163
To access your Online Albums options from your phone:
1. Display the album list in the Online Sprint Picture Mail menu. (See
“Managing Online Pictures and Videos From Your Phone” on page
161.)
2. Use your navigation key to select an album (or Inbox).
3. Select Options (
) to display options.
4. To select an option, highlight it and press
.
Ⅲ Send to send the album through the Sprint Picture Mail Web
site.
Ⅲ New Album to create a new album. Enter a new album name
and select Next (
). If additional albums are present, you
are provided with additional options:
ࡗ Rename Album to rename a selected album. ࡗ Erase Album to delete an existing album. Ⅲ Album Info to display information about the album. You can
view the name of the album, the creation date, and the number
of pictures and videos in the album.
164
Section 2I: Using the Built-in Camera
Printing Pictures Using PictBridge
PictBridge is an industry standard established by the Camera & Imaging
Products Association (CIPA) that enables a range of digital photo solutions,
including direct photo printing from a digital camera to a printer without the
need for a computer.
Printing From Your Phone
Your phone’s built-in camera allows you to print images directly to a printer
using the PictBridge technology. A USB cable must be connected between
the two devices before any printing can occur.
To use PictBridge to print pictures from your phone:
1. Insert one end of the USB accessory cable into the USB slot on the
printer. (The printer must support PictBridge technology.)
2. Select Menu > Pictures > PictBridge.
3. Insert the other end of the USB accessory cable into your phone.
4. Read the Connect Printer message and select
Next (
). The Select Folder pop-up appears in the display.
Select the folder location of the image.
5. Highlight the desired image and select Next (
). (To select
multiple images, press
to place a check mark next to each
image selected.)
6. Highlight Copies and press the navigation key left or right to select
the desired number of copies to print.
7. Press the navigation key down to select Type. Press the navigation
key left or right to select one of the following:
Ⅲ Standard: prints the standard image.
Ⅲ Index: prints the index information.
These options may vary and are dependent on the printer’s capabilities.
Note:
Section 2I: Using the Built-in Camera
165
8. Press the navigation key down to select Paper Size:
Ⅲ Default
Ⅲ 4x6
These sizes may vary and are dependent on the printer’s capabilities.
Note:
9. Press the navigation key down to select Date Print.
10. Press the navigation key down to select Border. Press the
navigation key left or right to turn this option on or off.
11. Select Preview (
) to preview the image, or select Print (
)
to print the image.
12. Select Yes to confirm printing and press
.
166
Section 2I: Using the Built-in Camera
Settings and Info
The Settings and Info menu allows you to configure where pictures or
videos are saved, view your account information, or set the view to portrait
or landscape mode.
To access the Settings and Info menu:
1. Select Menu > Pictures > Settings and Info.
2. Select one of the following options and press
.
Ⅲ Auto Save To to choose between Phone and Memory Card
as the default location to save pictures or videos.
Ⅲ Status Bar to view the status bar menu icons onscreen when
in picture or video mode.
(See “Viewing Your Camera’s Status Area Display” on page
148).
Ⅲ Account Info to display your current Sprint account settings
via an online connection.
Section 2I: Using the Built-in Camera
167
168
Using Your Phone’s Built-in
Media Player
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ Your Multimedia Channel Options
Accessing Your Media Player’s Channel Listings
Playing a Video or Audio Clip
Multitasking
Multimedia FAQs
Your phone’s built-in media player gives you the ability to listen to
audio clips and view video clips right from your phone’s display. It’s
a great way to stay up-to-date with news, weather, and sports information
while also enjoying the latest blockbuster movie trailers or music videos –
anywhere, anytime on the home network. Just access your media player
from your phone’s main menu, scroll to your choice of channel, and select
one of the video or audio clips to play. It’s like having a TV in the palm of
your hand.
This section explains the features and options of your phone’s built-in
media player.
Section 2J: Using Your Phone’s Built-in Media Player
169
Your Multimedia Channel Options
Multimedia Service offers a variety of accessible audio or video channels,
depending on your service plan and multimedia subscriptions. Your
subscription options include a comprehensive basic service as well as a full
menu of a variety of additional channel options.
ⅷ
ⅷ
ⅷ
Preview Channel: This free channel lets you sample clips from all the
available channels before you make a decision to subscribe. It’s like
viewing the movie preview before deciding whether you want to spend
the money to go see the full motion picture.
Multimedia Service: This comprehensive basic service gives you
access to a variety of content from familiar brands. Think of it as “basic
cable” for your phone. It allows you unlimited access to this content as
long as you continue to pay the monthly subscription fee.
Available Individual Channel Options: You also have the option of
subscribing to individual channels from an extensive menu offering.
These channels are available for a monthly subscription fee and allow
you unlimited access as long as you continue to pay your monthly
subscription fee.
170
Section 2J: Using Your Phone’s Built-in Media Player
Accessing Your Media Player’s
Channel Listings
It’s easy to access and view the multimedia Channel Listings from your
phone’s main menu.
To access your media player and Channel Listings:
ᮣ
Select Menu > Media Player.
Ⅲ Channel Listing: These include the complimentary Previews
channel that Sprint provides, as well as any available individual
channels for which you have purchased access. If you have
purchased Sprint TV, either through a Sprint TV Vision Plan
subscription or by purchasing it separately, it will be displayed
here.
Ⅲ Memory Card: Media files that have been downloaded and
saved to an installed memory card.
Ⅲ Play List: These are channels that have not yet been
purchased but are available to access for a monthly
subscription fee. Use your navigation key to scroll through and
select a channel, and follow the onscreen instructions to
purchase access to it. Upon purchasing access to one of these
channels, the channel will be listed, along with its
corresponding channel number, in the My Channels section of
your media player’s Channel Listings. You will see it displayed in
this section the next time you access your phone’s media
player.
Section 2J: Using Your Phone’s Built-in Media Player
171
Playing a Video or Audio Clip
To select and play a media clip:
1. Select Menu > Media Player.
2. Use your keypad to enter a channel number (or use your navigation
key to scroll to a channel and press
).
Ⅲ Channel Listing: If you have selected a channel that you’ve
already signed up for (or if it’s a channel with no monthly fee),
you will see a list of available clips.
Ⅲ Memory Card: Media content that was downloaded to a
memory card.
The first time you access one of your media files from your memory
card, you will be prompted to create a new Media folder on your card
where these type of files will be stored. Click Create to allow the
phone to create this new folder.
Note:
Ⅲ Play List: If you have selected a channel you have not yet
signed up for, you will be prompted to accept the corresponding
monthly charge. Follow the onscreen prompts to subscribe to
the selected channel. (A list of available clips will be displayed.)
3. Scroll to the clip you would like to play and press Select (
. (The clip automatically loads and begins playing.)
) or
Ⅲ Press the Camera Key to toggle the audio state between Mute
and Unmute.
Ⅲ Press the Up and Down volume keys to adjust the volume level.
Ⅲ Press the Up navigation key to view an onscreen list of your
available music files.
Ⅲ Press the Down navigation key to toggle between the various
playback options (Repeat current, Repeat All, Shuffle).
Ⅲ Press the Left navigation key to play the previous song in your
playlist.
172
Section 2J: Using Your Phone’s Built-in Media Player
Ⅲ Press the Right navigation key to play the next song in your
playlist.
Ⅲ Press
to play or pause the current song.
The first time you access one of your Available Channels, you are
prompted to accept the its monthly fee (unless it’s a channel that
doesn’t have an associated monthly fee). Accepting the charge gives
you access to the channel for as long as you continue to pay the
monthly fee. If you accept the fee, the next time you access your
phone’s media player, this channel will appear in your My Channels
section.
Note:
Section 2J: Using Your Phone’s Built-in Media Player
173
Multitasking
Multitasking (MVM) is a way of maintaining one application active while
using another. While your current music selection is playing, you can
activate the Application Manager screen and choose from a list of
available applications which can be run in tandem with your music.
Multasking is enabled only while using the Sprint Music Store (Menu >
Music).
Note:
To multitask on your phone:
1. Launch the Sprint Music Store application (Menu > Music).
2. Select the player tab and press
.
3. Use the navigation key to highlight the desired file and press
to
play the selected song.)
4. Press
to exit the Music Store application without closing it and
launch the popup menu, where you can choose from the following
options: Resume, Exit, App.Manager, and Send to Background.
Ⅲ If
is pressed while the song is still playing, the display
screen will reactivate the song’s playback screen.
5. Select App. Manager and press
to launch a Application
Manger screen which provides you access to several applications:
Ⅲ Application Manager manages all currently active
applications. With your music still playing, the Sprint Music
Store entry appears in the list.
174
Section 2J: Using Your Phone’s Built-in Media Player
6. Press Options (
) to access the following management options:
ࡗ Bring to Foreground reactivates the current application screen. For example, if your music is currently playing in the
background, selecting this option activates the music Player
tab with the song displayed.
ࡗ Exit Application terminates the currently selected application and returns you to the standby screen.
ࡗ Exit All Background terminates all currently active applications and returns you to the standby screen.
ࡗ Launch New App allows you to launch an application from the My Contents listing.
Section 2J: Using Your Phone’s Built-in Media Player
175
Receiving an Incoming Call While Playing Your Music
An incoming call causes the currently played music file to be paused while
the phone call is active. Once the current call is ended, you can select to
resume any paused applications (music will resume playing automatically).
1. Answer an incoming call by selecting Answer (
).
2. When you are done with your call, press
to end the call. The
previously paused application then resumes.
I
When placing an outgoing call, the Application Manager pauses your
current music playback and allows you to proceed with your outgoing
call. When the call is ended, the Application Manger restarts the music
playback.
Note:
If the phone is running more than one simultaneous application (such as
Music Store, Mobile Podcast, Application [from My Content], and Games),
the user interface can begin to slow down and result in music or sound
interruptions.
Ⅲ To solve this type of issue, it is best to close down all other
applications (Menu > My Content > Application Manager >
application.
Also, in some situations, the camera or camcorder may have limited
functionality or become unavailable. For example, if you were currently
playing music (via the Music Store), or playing a game in the background,
and then wanted take a photo, the phone may prompt you with a “CPU
Low, Kill the Application” dialog. This indicates that the current phone
resources are stretched and one of the current applications should be
terminated before continuing. Refer to the procedure above to exit either a
specific application or all current applications, and then launch the camera
or camcorder again.
176
Section 2J: Using Your Phone’s Built-in Media Player
Multimedia FAQs
1. Will I know if I’m receiving an incoming call while I’m
viewing or listening to an audio clip?
No. All incoming calls will roll into voicemail while you are playing a
clip. If the caller leaves a voicemail, the voicemail icon will appear on
the screen.
2. How long are the clips? Will I know the estimated time it will
take to play the clip prior to accessing it?
Once you have selected a channel, you will see a listing of the
available clips, with the clip’s length appearing after the clip’s title. In
general, a clip’s duration will depend on the story or content being
provided, and can be fairly short or as long as a few minutes.
3. Can I access a multimedia clip wherever I am, as long as I
have my phone?
As long as you are on the home network, you will have access to the
audio and video clips.
The Media Player Service does not work while roaming off the home
network or where service is unavailable.
Note:
4. Are the videos that I’m viewing “live” videos?
It depends on the content provider. Some of the channels available
through Sprint TV stream live content. Others provide media on
demand with video and audio clips that are refreshed throughout the
day, but that are not “live.”
5. After purchasing access to an Available Channel for a
monthly fee, do I receive any confirmation? That is, how do I
know it has been purchased?
The next time you access your media player’s Channel Listings, the
purchased channel title and corresponding number will appear in the
My Channels section.
Section 2J: Using Your Phone’s Built-in Media Player
177
6. Why are some channels already preloaded into the My
Channels section?
Some channels, such as Previews, are offered free of charge as a
customer courtesy. These channels automatically appear in the My
Channels section of your Channel Listings.
7. If I don’t subscribe to Sprint Vision Plan, will I still be able to
view the multimedia clips?
No.
8. How can I easily access a channel without having to scroll
through all the channels in my Channel Listings?
Each channel will have a number to the left of it. You can simply
press this number to quickly access the clips located within that
channel.
When entering the specific channel number, channels 01–09 do not
require you to enter a “0.” For example, to access channel “07,” just
press the “7” key.
Tip:
9. What does it mean when the video pauses and I see the word
“loading” at the bottom of the screen?
This happens when the media player is in the process of loading the
data necessary to play the clip. It typically occurs when there is
heavy traffic on the network.
10. How can I cancel service if I decide I don’t want it?
To cancel your Multimedia service, contact Qwest.
11. Can I surf to a different channel while I am playing a clip?
Yes; while you are playing a clip, you can use the up and down
navigation buttons to surf to a different channel. A small pop-up
screen will appear that tells you which channel you are watching as
well as other channels you have access to. Use the navigation
buttons to scroll through the different channels. Once you find a
channel that you want to watch, scroll to it and press
(or
simply wait approximately three seconds) and the channel will begin
loading.
178
Section 2J: Using Your Phone’s Built-in Media Player
Section 2K
Mobile Podcasting
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ Launching the Mobile Podcasting Service
Podcast Channel Options
Updating Podcast Channel Preferences
Listening to Podcasts
Registration and Podcast Sign-up
Your phone's Mobile Podcast Services let you access and listen to
audio podcasts right on your phone. A podcast is a media file that is
distributed over the Internet using a syndication file format known as RSS
feed. Mobile Podcast Services provide access to RSS distributed audio
content on your wireless phone. This section includes easy-to-follow
instructions on setting up and using podcast services.
Section 2K: Mobile Podcasting
179
Launching the Mobile Podcasting Service
1. Select Menu > Tools > Mobile Podcasts.
2. If you are using Mobile Podcasts for the first time, please review the
Terms and Conditions and select Accept (
) to agree to the
information or Cancel ( ) to exit the application.
In order to connect to the remote service, you cannot have the data
cable connected to the Power/Interface connector on the phone. Doing
so shifts the phone into a direct data communication mode and
prevents wireless connection to the remote service. Remove the cable
and try again.
Note:
If you are using Mobile Podcasts for the first time, the application will
automatically update your podcast channels. It will take a few seconds
to update all podcast channels.
3. When the update finishes, you will see a listing of currently available
mobile podcast channels that you can enjoy right away. This list
includes any podcasts which you have previously subscribed to and
updated to your phone.
180
Section 2K: Mobile Podcasting
Podcast Channel Options
1. From the Podcast Channels page, select a channel and select Menu
(
). Your options are:
Ⅲ Play
Ⅲ View Channel to view the list of podcasts available within that
channel category, such as Business and Money, Comedy, etc.
Ⅲ Update to update the list of available channel categories and
podcasts.
Ⅲ Pick Channels to enable or disable individual channels.
Ⅲ Preferences to set Preferences for Update channels at start up
to provide login information, to manage old episodes, and to set
the font size. (See “Updating Podcast Channel Preferences” on
page 182.)
Ⅲ Tell a Friend to tell friends about Samsung Mobile Podcasts by
sending them an SMS text message.
Ⅲ About to see information about Samsung Mobile Podcasts.
Ⅲ Exit to return to the Tools menu.
To enable/disable channels:
1. From the Podcast Channels page, select Menu > Pick Channels.
2. Scroll to a channel entry and press
to enable (check) or disable
(uncheck) channels one by one.
3. Select Done (
) to store your new settings and return to the
Podcast Channels page.
Section 2K: Mobile Podcasting
181
Updating Podcast Channel Preferences
The Preferences menu allows you to provide your login information and
manage the application behavior.
1. Select Menu > Tools > Mobile Podcasts.
2. Use the navigation key to scroll down to the channel of your choice.
3. Select Menu > Preferences from any channel. Use this option to
update your default podcast preferences.
4. Select options by first highlighting them and then pressing
.
Ⅲ Update channels at start up allows you to choose how your
channels are updated.
ࡗ No (manual) allows you to use the Update Channels command to update channels at a time most convenient to
you.
ࡗ Prompt me requires you to respond to the Update prompt each time you launch the application.
ࡗ Automatic allows the application to update your channels automatically when Mobile Podcasts launches.
Ⅲ User allows you to choose whether to add previously
registered/subscribed podcasts to the default listing of available
podcasts.
ࡗ Registered lets you choose additional podcast content by have registered, you can enter your user name and
password under User by clicking the Registered checkbox.
Ⅲ Old Episodes allows you to choose whether to automatically
delete old episodes.
ࡗ Auto delete allows you to conserve memory usage on your wireless phone by allowing the application to automatically
delete old episodes. You can choose to retain old episodes
by unchecking this box.
182
Section 2K: Mobile Podcasting
Ⅲ Font Size allows you to choose the default font size used by
the display screen. The font size options are:
ࡗ Small ࡗ Medium ࡗ Large 5. Select Save (
) to store your new preferences and return to the
Podcast Channels page.
6. Select Update (
) to refresh the list of available Podcast
Channels.
Listening to Podcasts
1. Select Menu > Tools > Mobile Podcasts.
2. Highlight a channel and press
to show a list of available
podcasts for that channel.
3. Highlight a podcast and select View (
) to view detailed
information about the podcast such as: Title, From, Published,
Duration, and Summary. You can select Play Now (
the podcast. The podcast will then take a few seconds to load. The
display screen then changes to the player display screen. The
progress bar indicates Buffering. When the progress bar
disappears, you will begin to hear the podcast.
) to play
4. Adjust the volume by using the left and right navigation keys located
on the phone.
5. To pause the podcast, press
. Press
again when you want
to resume playing.
6. During the podcast, select Menu (
) to access these options:
Ⅲ Play Next allows you to play the next podcast in the list (for the
currently selected channel category).
Ⅲ Play Previous allows you to play the previous podcast in the
list (for the currently selected channel category).
Ⅲ Restart allows you to replay the current podcast.
Section 2K: Mobile Podcasting
183
Ⅲ View Details allows you to view podcast details such as: Title,
From, Published, Duration, and Summary.
Ⅲ Share allows you to share a link to the currently selected
podcast by sending an SMS message to another wireless phone
number.
ࡗ Enter a wireless phone number into the Phone Number field.
ࡗ Once you’ve entered the target number, select Send ( )
to send the podcast.
Ⅲ Feedback allows you to send text or audio feedback to podcast
publishers who have registered with Samsung Podcasts. Select
one of these feedback options:
ࡗ join your community – If you choose join mailing list, enter your email address into the Enter your email address field
and select OK (
ࡗ call publisher – If you choose call the publisher, select OK ) and your phone will initiate a call to the publisher.
).
(
By selecting to call the publisher, you will be exiting Samsung Mobile
Podcasts and will need to restart the application after your call.
Note:
ࡗ send a message – If you choose send a message, enter your message into the Message field, your email address
into the Enter your email address field, and select OK
(
).
7. Select Cancel (
) to return to the podcasts menu.
184
Section 2K: Mobile Podcasting
Registration and Podcast Sign-up
Your phone is preloaded with some default podcast channels which can be
accessed without the need to register online. Although usage of the default
podcast channels does not require registration, a user must register online
to gain access to the entire listing of available podcast channels.
This streaming service accesses the Internet. If you do not already have
Internet access as part of your service plan, data access charges may
then be incurred.
Note:
You can personalize the list of available podcasts by registering with
Samsung Mobile Podcasts and then subscribing to your own set of
preferred podcasts.
To create your podcast account:
1. Launch your computer’s Internet browser and in the Address field,
enter http://samsung.voiceindigo.com.
2. In the upper-right section of the Web page, click Register (free) to
begin the registration and subscription process. Follow the onscreen
prompts, fill in the required information, and accept the terms of
service.
Ⅲ Once you’ve completed the registration process, your My
Channels page is displayed with default podcast channels.
3. Click show more podcasts. This expands the browser window to
reveal several available podcasts. These podcasts are grouped by
popularity and by category.
4. Choose a podcast you would like to add and click subscribe. This
indicates that you wish to receive updates to this podcast “show” by
having it available as a selectable category via your Podcast
channels.
5. From the Add Subscription screen, select which podcast channel
group the new subscription will be added to.
Section 2K: Mobile Podcasting
185
Ⅲ Your account comes with a default channel group called My
First Channel. Think of this set as a basic collection of
available podcasts.
Ⅲ You can also choose to create a new channel group.
6. Assign the channel group, either by selecting from the My Channel
group or by creating your own New Channel (with associated
privacy).
7. Click Add Subscription to finish adding the new podcast.
8. Repeat steps 4 - 7 for each additional podcast you would like to
receive.
To synchronize your podcasts with your phone:
1. Launch your Internet browser and in the Address field, enter http://
samsung.voiceindigo.com.
2. Click Sign-In to access your My Channels page.
3. Begin the synchronization process by clicking on the your mobile
phone link (above the Popular Podcasts section of your page).
4. From the Mobile Registration page, fill out the following information:
Ⅲ Your Mobile Carrier: enter USA - Qwest.
Ⅲ Your Mobile Phone Number: your wireless phone number
(Menu > Settings > Phone Info).
Ⅲ Samsung Model: M520.
Ⅲ Send a text message: (see step 5).
5. Choose how you would like to have podcast updates delivered. You
can have podcasts delivered to your mobile phone by:
Ⅲ VoiceIndigo Mobile: VoiceIndigo Mobile, supported by M520,
automatically synchronizes the podcasts in your account
between the Web and your phone. Leave your phone on, and
listen to podcasts whenever and wherever you want.
ࡗ If this is your selected method of Podcast update, do not check the “Send a text message” option at the bottom of
the Mobile Registration page.
186
Section 2K: Mobile Podcasting
Ⅲ Using the [mobilize] links next to specific podcasts. The service
will send a text message to your phone with a convenient link
that enables you to download the podcast.
ࡗ If this is your selected method of podcast update, select the “Send a text message” option at the bottom of the Mobile
Registration page.
6. Click Update to complete synchronization. If you did not enter your
personal information during the initial registration process, you are
taken to the About Yourself page where you’ll be asked to update
your personal information.
7. Click Skip and take me to the podcasts if you do not wish to
update your personal information at this time.
8. Turn your phone off and then on again, and launch the podcasting
service.
Section 2K: Mobile Podcasting
187
188
Section 2L
Using Bluetooth
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ Turning Bluetooth On and Off
Using the Bluetooth Settings Menu
Supported Bluetooth Profiles
Pairing Bluetooth Devices
FTP Contents Folder
Your phone features built-in Bluetooth technology, allowing you to
share information more easily than ever before. Bluetooth is a short-
range communications technology that allows you to connect wirelessly to
a number of Bluetooth-enabled devices, such as headsets, hands-free car
kits, handhelds, PCs, printers, and wireless phones. The Bluetooth
communication range is usually up to approximately 10 meters (30 feet).
This section details how to set up and make the most of your phone’s
Bluetooth capabilities.
Section 2L: Using Bluetooth
189
Turning Bluetooth On and Off
By default, your device’s Bluetooth functionality is turned off. Turning
Bluetooth on makes your device “discoverable” by other in-range Bluetooth
devices, provided that visibility has been turned on. (See “Bluetooth
Settings: Visibility” on page 192.)
To turn Bluetooth on:
1. Select Menu > Settings > Bluetooth > On/Off.
2. Highlight On and press
to enable Bluetooth.
To turn Bluetooth off:
1. Select Menu > Settings > Bluetooth> On/Off.
2. Highlight Off and press
to disable Bluetooth.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a glance:
ⅷ
ⅷ
– Bluetooth is enabled (actual icon is black).
– Bluetooth is connected to a device or is transferring data
(actual icon is blue).
ⅷ
– Bluetooth is hidden (actual icon is gray).
190
Section 2L: Using Bluetooth
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many of the
characteristics of your phone’s Bluetooth service, including:
ⅷ
ⅷ
ⅷ
Entering or changing the name your phone uses for Bluetooth
communication.
Setting your phone’s visibility (or “discoverability”) for other Bluetooth
devices.
Displaying your phone’s Bluetooth address.
1. Select Menu > Settings > Bluetooth.
2. Use the navigation key to select On/Off, Visibility, Device Name,
Device Info, Trusted Devices, FTP Contents Folder, Select
Device type, or Voice Caller ID and press
.
Enabling the Bluetooth option on your phone allows you to receive a
Caller ID announcement when an incoming call is detected by the
Bluetooth device (provided that Voice Caller ID has been turned on).
When an incoming caller has previously been saved to your Contacts
list, the user’s contact name will be announced via the headset. If an
incoming caller is not currently in your Contacts, only their phone
number is announced via the headset.
Note:
Bluetooth Settings: My Bluetooth Device Name
The My Bluetooth Name section of the Bluetooth Settings menu allows you
to select a Bluetooth name for your phone. Your phone’s Bluetooth name
will appear to other in-range Bluetooth devices, depending on your visibility
settings.
To set a Bluetooth name for your phone:
1. Select Menu > Settings > Bluetooth > Device Name.
2. Press and hold
to clear the current name.
3. Use your keypad to enter a new name and press
to save and
exit.
Section 2L: Using Bluetooth
191
Bluetooth Settings: Visibility
The Visibility section of the Bluetooth Settings menu allows you to manage
your availability to other Bluetooth devices.
To configure your phone’s visibility to other Bluetooth devices:
1. Select Menu > Settings > Bluetooth > Visibility.
2. Select a visibility setting and press
:
Ⅲ Always visible to allow other Bluetooth devices to detect and
identify your phone.
Ⅲ Visible for 3min to allow other devices three minutes to detect
your phone before changing your status to hidden.
Ⅲ Hidden to prevent other Bluetooth devices from detecting and
identifying your phone.
Any changes you make to your Bluetooth settings will be saved when
you exit the Bluetooth Settings menu. Any setting changes will apply to
all devices in the same category.
Note:
Bluetooth Settings: My Bluetooth Address
To display your phone’s Bluetooth address:
ᮣ
Select Menu > Settings > Bluetooth > Device Info.
Bluetooth Settings: Voice Caller ID
To enable Bluetooth voice caller ID:
1. Select Menu > Settings > Bluetooth > Voice Caller ID.
2. Highlight On and press
to enable Bluetooth voice caller ID.
To disbale Bluetooth voice caller ID:
1. Select Menu > Settings > Bluetooth> Voice Caller ID.
2. Highlight Off and press
to disable Bluetooth voice caller ID.
192
Section 2L: Using Bluetooth
Supported Bluetooth Profiles
All the Bluetooth settings you configure are stored in your phone’s
Bluetooth user profile (also known as the AG Profile). Different profiles can
be used for specific Bluetooth functions.
ⅷ
HSP: Headset Profile—Bluetooth technology connects the phone to
a wireless Bluetooth-enabled headset. When an incoming call is
received, the ringer can be heard through the headset instead of
through the phone. The call can then be received by pressing a button.
Increase or decrease the volume by using the volume key on the side
of the phone.
ⅷ
HFP: Hands-Free Profile—Bluetooth technology connects the phone
to a wireless Bluetooth-enabled car kit. Incoming calls ring to the
hands-free headset or device. Calls can be received by pressing a
button on the headset or device. For dialing, four functions are
supported: recent call dial, voice dial, speed dial, and number dial.
Increase or decrease the volume by using the volume key on the side
of the phone.
ⅷ
ⅷ
DUN: Dial-Up Network Profile—Bluetooth technology functions as
a wireless data cable, connecting a PC or PDA to a network through
your phone.
OPP: Object Push Profile—based on the Generic Object Exchange
(OBEX) profile which uses predefined object formats. The object
formats are vCard, vCal, vMsg, and vNote.
ⅷ
ⅷ
ⅷ
FTP: File Transfer Protocol—based on the Generic FTP Protocol to
exchange files.
BPP: Basic Printing Profile—Bluetooth technology functions as a
PictBridge printing connection to a printer from your phone.
A2DP: Advance Audio Distribution Profile—transfers a two-
channel stereo audio stream, like music from an MP3 player, to a
headset or car radio.
Section 2L: Using Bluetooth
193
ⅷ
ⅷ
AVRCP: Audio Video Remote Control Profile—provides a standard
interface to control TVs, hi-fi equipment, etc. to allow a single remote
control (or other device) to control all the A/V equipment that a user
has access to. It may be used in concert with A2DP or VDP.
PBAP: Phone Book Access Profile—allows you to see your
phone's Call History and phonebook, including detailed information
about Contacts entries. To use this function, your car kit must support
PBAP.
Verify that your headset or device is powered and is configured for
pairing. (This typically involves configuring your headset or device to
transmit a signal that it is searching for a Bluetooth phone).
Note:
To assign your Bluetooth device profile/type:
1. Select Menu > Settings > Bluetooth > Select Device type.
2. Select either Hands-Free or HeadSet and press
.
194
Section 2L: Using Bluetooth
Pairing Bluetooth Devices
Paired Devices
The Bluetooth pairing process allows you to establish trusted connections
between your phone and another Bluetooth device. When devices are
paired, a passkey is shared between devices, allowing for fast, secure
connections while bypassing the discovery and authentication process.
To pair your phone with a Bluetooth device:
1. Select Menu > Tools > Bluetooth.
2. Select Add New (
). (Your phone will display a list of discovered
in-range Bluetooth devices.)
3. Select Search and press
.
4. Select the device you wish to pair with and select
Add to list ( ).
5. Enter the numeric passkey and press
. You are then notified
that Pairing is in progress.
6. Use your keypad to enter a new Device Name for the device and
select Done ( ) to save and exit.
7. Highlight the device and select Connect (
). (Connection
Successful will be displayed if the device is communicating
properly.)
Waiting for pairing
If you are going to be using a Dial-Up Network (DUN) profile to pair with a
PC or PDA, you will need to allow the other device to initiate pairing with
your phone.
To allow your phone to be paired with another Bluetooth device:
1. Select Menu > Tools > Bluetooth.
2. Select Add New (
).
3. Select Wait for request and press
.
4. The visibility pop-up screen is displayed.
5. Follow the onscreen prompts to enter your passkey and press
.
Section 2L: Using Bluetooth
195
FTP Contents Folder
You can send and receive files between your phone and computer via
Bluetooth using the FTP transfer protocol. The destination folder on your
computer must first be set up to exchange data via FTP.
The computer must support Bluetooth Wireless Technology to transfer
files.
Note:
To assign a folder for FTP transfers:
1. Select Menu > Settings > Bluetooth > FTP Contents Folder.
2. Highlight the folder location (Phone or Memory card) and press
.
196
198
Qwest® Service Features: The Basics
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Using Voicemail
Using SMS Text Messaging
Using Caller ID
Responding to Call Waiting
Making a Three-Way Call
Using Call Forwarding
Now that you’ve mastered your phone’s fundamentals, it’s time to
explore the calling features that enhance your wireless service.
This section outlines your basic Qwest service features.
Section 3A: Qwest Service Features: The Basics
199
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to your phone are automatically transferred to your
voicemail, even if your phone is in use or turned off. Therefore, you will
want to set up your voicemail and personal greeting as soon as your phone
is activated.
To set up your voicemail:
1. Press and hold
.
2. Follow the system prompts to:
Ⅲ Create your passcode.
Ⅲ Change your personal options.
Ⅲ Choose whether or not to activate One-Touch Message Access
(a feature that lets you access messages simply by pressing
and holding
passcode).
, bypassing the need for you to enter your
Ⅲ Record your name announcement.
Ⅲ Record your greeting.
Voicemail Passcode
If you are concerned about unauthorized access to your voicemail
account, Qwest recommends you enable your voicemail passcode.
Note:
200
Section 3A: Qwest Service Features: The Basics
Voicemail Notification
There are several ways your phone alerts you to a new message:
ⅷ
By displaying a message on the screen.
By sounding the assigned ringer type.
ⅷ
New Voicemail Message Alerts
When you receive a new voice message, your phone alerts you and
prompts you to call your voicemail.
To call your voicemail:
ᮣ
Press and hold
.
To display your Missed Log:
ᮣ
Press
twice to access the Missed Alerts screen.
When you are roaming off the home network, you may not receive
notification of new voicemail messages. It is recommended that you
periodically check your voicemail by dialing 1 + area code + your
Note:
wireless phone number. When your voicemail answers, press ( ) and
*
enter your passcode. You will be charged roaming rates when
accessing voicemail while roaming off the home network.
Your phone accepts messages even when it is turned off. However, you
are notified of new messages only when your phone is turned on and
you are in a network service area.
Section 3A: Qwest Service Features: The Basics
201
Retrieving Your Voicemail Messages
You can review your messages directly from your phone or from any other
touch-tone phone. To dial from your phone, you can either speed dial your
voicemail or use the menu keys.
Using One-Touch Message Access
ᮣ
Press and hold
. (Your phone will dial your voicemail box.)
Using the Menu Keys on Your Phone to Access Your
Messages
ᮣ
Select Menu > Messaging > Voicemail(New) > Call Voicemail.
You are charged for airtime minutes when you are accessing your
voicemail from your phone.
Note:
Using Another Phone to Access Messages
1. Dial your wireless phone number.
Shift
2. When your voicemail answers, press
.
3. Enter your passcode.
When you call into voicemail, you first hear the header information
(date, time, and sender information) for the message. To skip directly to
the message, press 4 during the header.
Tip:
202
Section 3A: Qwest Service Features: The Basics
Voicemail Key Guide
Here’s a quick guide to your keypad functions while listening to voicemail
messages. For further details and menu options, see “Voicemail Menu Key
Guide” on page 207.
DEF
ABC
Date/Time Send Reply Advance
MNO
JKL
Replay
Rewind
Forward
WXYZ
TUV
Call Back
Next
PQRS
Erase
Save
Space
Shift
Cancel
Help
Skip
Voicemail Options
Your phone offers several options for organizing and accessing your
voicemail.
Using Expert Mode
Using the Expert Mode setting for your personal voicemail box helps you
navigate through the voicemail system more quickly by shortening the
voice prompts you hear at each level.
To turn Expert Mode on or off:
1. Press and hold
to access your voicemail. (If your voicemail box
Shift
contains any new or saved messages, press
to access the
main voicemail menu.)
DEF
2. Press
to change your Personal Options, following the system
prompts.
DEF
3. Press
for Expert Mode.
4. Press
to turn Expert Mode on or off.
Section 3A: Qwest Service Features: The Basics
203
Setting Up Group Distribution Lists
Create up to 20 separate group lists, each with up to 20 contacts.
1. Press and hold
to access your voicemail. (If your voicemail box
Shift
contains any new or saved messages, press
to access the
main voicemail menu.)
DEF
2. Press
to change your Personal Options, following the system
prompts.
3. Press
4. Press
to access your voicemail settings.
for Group Distribution Lists.
JKL
5. Follow the voice prompts to create, edit, rename, or delete group
lists.
Callback
Return a call after listening to a message without disconnecting from
voicemail.
TUV
ᮣ
Press
after listening to a message. (Once the call is complete,
you’re returned to the voicemail main menu.)
Voicemail-to-Voicemail Message
Record and send a voice message to other voicemail users.
ABC
1. From the main voicemail menu, press
to send a message.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record and send your voice message.
Voicemail-to-Voicemail Message Reply
Reply to a voice message received from any other voicemail user.
ABC
1. After listening to a voice message, press
.
2. Follow the voice prompts to record and send your reply.
204
Section 3A: Qwest Service Features: The Basics
Voicemail-to-Voicemail Message Forwarding
Forward a voice message, except those marked “Private,” to other
voicemail users.
Next
MNO
1. After listening to a message, press
and then
.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record your introduction and forward the
voice message.
Voicemail-to-Voicemail Receipt Request
Receive confirmation that your voice message has been listened to when
you send, forward, or reply to other users.
ABC
1. After you have recorded a message, press
to listen to your
message.
JKL
2. Press
3. Press
4. Press
for more options.
DEF
to mark receipt requested.
to send your voicemail message.
Continue Recording
When leaving a voice message, you can choose to continue recording even
after you’ve stopped.
ᮣ
Before pressing
message you recorded, press
to indicate that you are satisfied with the
to continue recording.
Extended Absence Greeting
When your phone is turned off or you are off the home network for an
extended period, this greeting can be played instead of your normal
personal greeting.
DEF
1. From the main voicemail menu, press
for Personal Options.
ABC
2. Press
3. Press
for greetings.
to record an Extended Absence Greeting.
DEF
Section 3A: Qwest Service Features: The Basics
205
Clearing the Message Icon
Your phone may temporarily continue to display the message icon after you
have checked your voice and text messages.
To clear the icon from the display screen:
1. Select Menu > Messaging > Voicemail > Clear Envelope.
2. Select Yes or No and press
.
206
Section 3A: Qwest Service Features: The Basics
Voicemail Menu Key Guide
Following the prompts on the voicemail system, you can use your keypad to
navigate through the voicemail menu. The following list outlines your
phone’s voicemail menu structure.
Listen
Envelope Information (Date & Time Information)
ABC
Send Reply
DEF
Advance 8 Seconds
Replay
JKL
Rewind 8 Seconds
MNO
Forward Message
PQRS
TUV
Erase
Call Back
WXYZ
Save
Next
Options
Space
Skip to the nextmessage
Return to the main menu
Shift
ABC
DEF
Send a Message
Change Personal Options
Settings
Skip Passcode On/Off
ABC
DEF
Autoplay On/Off
Playback of Message Date, Time, and Caller Info On/Off
Section 3A: Qwest Service Features: The Basics
207
Change Passcode
JKL
Group Distribution List
MNO
Callers to Send Numeric Page On/Off
Return to Previous Menu
Shift
ABC
Greetings
Change Main Personal Greetings
ABC
Change Recorded Name
DEF
Create Extended Absence Greeting
Return to Personal Options Menu
Shift
DEF
Expert Mode (On/Off)
TUV
Place a Call
Disconnect
Shift
208
Section 3A: Qwest Service Features: The Basics
Using SMS Text Messaging
With SMS Text Messaging, you can use other people’s wireless phone
numbers to send instant text messages from your phone to their
messaging-ready phones – and they can send messages to you. When you
receive a new message, it will automatically be displayed on your phone’s
screen.
In addition, SMS Text Messaging includes a variety of preset messages,
such as “I’m running late, I’m on my way,” that makes composing
messages fast and easy. You can also customize your own preset
messages (up to 128 characters) from your phone.
Composing SMS Text Messages
To compose an SMS Text message:
1. Select Menu > Messaging > Send Message > Text.
2. Select Contacts, Mobile #, or Email and press
3. Enter the contact, number, or email address and select OK (
and select OK ( ) then select Next ( ). (You may include up
to 10 recipients per message.)
.
).
5. Compose a message using one of the following methods:
Ⅲ To type a message, use your keypad to enter your message.
Use Options (
6. To use a preset message, recent message, or an emoticon, select
Options ( ) and select Preset Msg, Recent Msg, or
) to select a character input mode.
Emoticons. Press the number on the keypad that corresponds to
the number next to the message or emoticon.
7. Select Next (
8. Review your message and select Send (
the following additional messaging options by selecting Options
):
).
). You may also select
(
Section 3A: Qwest Service Features: The Basics
209
Ⅲ Edit to edit the existing message before sending.
Ⅲ Priority to set the message priority level
[Normal or Urgent].
Ⅲ Call Back # to set the callback number.
Ⅲ Save to Drafts to save the message without sending.
Accessing SMS Text Messages
To read an SMS Text message:
ᮣ
When you receive a text message, it will automatically appear on
your phone’s main display screen. Use your navigation key to scroll
down and view the entire message.
To reply to an SMS Text message:
1. While the message is open, select Reply (
).
2. Compose your reply or use the preset messages or icons.
Ⅲ To type a message, use your keypad to enter your message.
Use Options (
Ⅲ To use a preset message or an emoticon, select Options
) to select a character input mode.
(
Press the number on the keypad that corresponds to the
number next to the message or emoticon.
3. Select Next (
).
4. Review your message and select Send (
). You may also select
the following additional messaging options by selecting Options
(
):
Ⅲ Edit to edit the existing message before sending.
Ⅲ Priority to set the message priority level
[Normal or Urgent].
Ⅲ Call Back # to set the callback number.
Ⅲ Save to Drafts to save the message without sending.
210
Section 3A: Qwest Service Features: The Basics
Using Preset Messages
Preset messages make sending text messages to your friends, family, and
coworkers easier than ever.
To add or edit preset messages:
1. Select Menu > Messaging > Settings > General > Preset
Messages.
2. Select Options (
) > Add New.
– or –
Highlight a message you wish to insert, select Options (
Erase, or select Edit ( ).
)>
3. Enter your new message or make changes and press
. (See
“Entering Text” on page 45.)
Using Caller ID
Caller ID allows people to identify a caller before answering the phone by
displaying the number of the incoming call. If you do not want your number
displayed when you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific
outgoing call:
MNO
Shift
1. Press
PQRS
.
2. Enter the number you want to call.
3. Press
.
To permanently block your number, contact Qwest Wireless® Repair
at 1-877-879-0611.
Section 3A: Qwest Service Features: The Basics
211
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding
two beeps. Your phone’s screen informs you that another call is coming in
and displays the caller’s phone number (if it is available).
To respond to an incoming call while you’re on a call:
ᮣ
Press
second call.)
To switch back to the first caller:
Press again.
. (This puts the first caller on hold and answers the
ᮣ
For those calls where you don’t want to be interrupted, you can
temporarily disable Call Waiting by pressing *70 before placing your
call. Call Waiting is automatically reactivated once you end the call.
Tip:
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates will be charged for each of the
two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press
2. Once you have established the connection, select Options (
3. Select 3-Way Call and press . (This action puts the first caller
.
).
on hold and then activates a second call dialog where you can enter
the second number.)
4. Enter the second number and select Call (
) to establish a
connection to the third party.
5. Press
way call.
to join all three parties together and establish the three-
212
Section 3A: Qwest Service Features: The Basics
If one of the people you called hangs up during your call, you and the
remaining caller will still remain connected. If you initiated the call and are
the first to hang up, all other callers are then disconnected.
.
Call Waiting and Three-Way Calling are not available while roaming off
the home network.
Note:
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone
number – even when your phone is turned off. You can continue to make
calls from your phone when Call Forwarding is activated.
To activate Call Forwarding:
ABC
Shift
1. Press
PQRS
.
2. Enter the area code and phone number to which calls should be
forwarded.
3. Press
. (You will see a message and hear a tone to confirm the
activation of Call Forwarding.)
To deactivate Call Forwarding:
Next
ABC
Shift
1. Press
PQRS
.
2. Press
. (You will see a message and hear a tone to confirm the
deactivation.)
You may be charged a higher rate for calls you have forwarded.
Note:
Section 3A: Qwest Service Features: The Basics
213
214
Section 3B
Sprint Vision
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ Sprint Vision Applications
Getting Started With Sprint Vision
Accessing Messaging
Downloading Premium Services Content
Exploring the Web
Sprint Vision offers easy and amazing data services you will really
use. These features – including messaging, games, downloadable ringers
and screen savers, and portable Web access – let you have fun, stay in
touch, and stay informed no matter where you go on the home network.
This section introduces these advanced services and walks you through the
necessary steps to start taking advantage of Sprint Vision Services.
Section 3B: Sprint Vision
215
Sprint Vision Applications
Here is a brief list of the applications available through your phone.
Sprint Picture Mail: Instantly shoot, share, and print sharp, high-
resolution, digital pictures, and take and send short video clips
with your phone.
Messaging: Send and receive emails and chat on your phone.
Music: Stream music to the Media Player built into your phone.
Games: Play exciting games with full-color graphics, sound,
andvibration.
Ringers: Personalize your phone by downloading and assigning
different ringers to numbers in your Contacts.
Screen Savers: Download unique images to use as screen savers
—or make it easy to tell who’s calling by assigning specific image
to numbers in your Contacts.
your phone.
216
Section 3B: Sprint Vision
Getting Started With Sprint Vision
This section will help you learn the basics of using your Sprint Vision
services, including managing your User name, launching a Vision
connection, and navigating the Web with your phone.
Your User Name
When you buy a phone and sign up for service, you're automatically
assigned a user name, which is typically based on your name and
a number, followed by “@qwest.sprintpcs.com.” (For example, if your
phone number is 555-123-4567, your user name wil be
When you use Sprint Vision services, your user name is submitted to
identify you to the home network. The user name is also useful as an
address for email, as a way to personalize Web services, and as an online
virtual identity.
Your user name will be automatically programmed into your phone. You
don't have to enter it.
Finding Your User Name
If you aren't sure what your Sprint Vision user name is, you can easily find
it online or on your phone.
To find your user name:
ᮣ
From standby mode, go to Menu > Settings > Phone Info. >
Phone Number.
Section 3B: Sprint Vision
217
Launching a Sprint Vision Connection
To launch a Sprint Vision connection:
ᮣ
Select Menu > Web. (Your Sprint Vision connection will open and
the Sprint Vision home page will be displayed.)
The Sprint Vision Home Page
You can also press the navigation key right to launch the
Web.
Shortcut:
If Net Guard is enabled and displayed (see page 219), press OK (right
softkey) to continue and launch the Web.
Note:
While connecting, the following will appear on the screen: Vision
Connecting....
218
Section 3B: Sprint Vision
If you had a previous Sprint Vision connection, the last page you visited
may be displayed when you launch your browser. When this occurs, you
may not see the “Connecting...” message when you launch the session.
Though the browser is open, you are not currently in an active data
session—that is, no data is being sent or received. As soon as you
navigate to another page, the active session will launch and you will see the
“Connecting...” message.
Net Guard
When you first connect to the Web, the Net Guard will appear to confirm
that you want to connect. This feature helps you avoid accidental
connections. You can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ
Select Menu > Settings > More... > Data > Net Guard.
Ⅲ On to activate the Net Guard.
Ⅲ Off to deactivate the Net Guard.
When enabled, the Net Guard appears only once per session. The Net
Guard does not appear if the phone is merely reconnecting because of
a time-out.
Note:
Section 3B: Sprint Vision
219
Sprint Vision Connection Status and Indicators
Your phone's display lets you know the current status of your Sprint Vision
connection through indicators which appear at the top of the screen. The
following symbols are used:
Your Sprint Vision connection is active (data is being
transferred); the transmit/receive symbol will blink to indicate
data transmission. Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the Sprint Vision
connection will terminate.
Your Sprint Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly; voice calls can
be made and received.
Your phone is not currently able to access Sprint Vision service
features.
Your phone is connected to a high-speed Sprint Power Vision
connection.
A high-speed Sprint Power Vision connection is available.
The high-speed Sprint Power Vision connection is dormant.
Your high-speed Sprint Power Vision connection is active.
If no indicator appears, your phone does not have a current Sprint Vision or
Sprint Power Vision connection. To launch a connection, see “Launching a
Sprint Vision Connection” on page 218.
220
Section 3B: Sprint Vision
Navigating the Web
Navigating through menus and Web sites during a Sprint Vision session is
easy once you've learned a few basics. Here are some tips for getting
around:
Softkeys
During a Sprint Vision session, the bottom line of your phone's display
contains one or more softkeys. These keys are shortcut controls for
navigating around the Web, and they correspond to the softkey buttons
directly below the phone’s display screen.
Depending on which Web sites you visit, the labels on the softkeys may
change to indicate their function.
Tip:
To use softkeys:
Press the desired softkey button. (If an additional pop-up menu
ᮣ
appears when you press the softkey button, select the menu items
using your keypad [if they’re numbered] or by highlighting an option
and pressing
.)
Scrolling
As with other parts of your phone's menu, you'll have to scroll up and down
to see everything on some Web sites.
To scroll line by line through Web sites:
ᮣ
Press the navigation key up and down.
To scroll page by page through Web sites:
Press the volume buttons on the side of the phone.
ᮣ
Section 3B: Sprint Vision
221
Selecting
Once you've learned how to use softkeys and scroll, you can start
navigating the Web.
To select onscreen items:
ᮣ
Use the navigation key to highlight the desired item, then press the
desired softkey button (or press ).
You’ll find that the left softkey is used primarily for selecting items. This
softkey is often labeled “OK.”
Tip:
If the items on a page are numbered, you can use your keypad (number
keys) to select an item. (The tenth item in a numbered list may be
selected by pressing the 0 key on your phone’s keypad, even though
the number 0 doesn’t appear on the screen.)
Links, which appear as underlined text, allow you to jump to Web pages,
select special functions, or even place phone calls.
To select links:
ᮣ
Highlight the link and press the appropriate softkey.
Going Back
To go back one page:
ᮣ
Press the
key on your phone.
The BACK key is also used for deleting text (like a BACKSPACE key)
when you are entering text.
Note:
Going Home
To return to the Sprint Vision home page from any other Web page:
ᮣ
Press and hold
– or –
.
Select Menu > Home.
222
Section 3B: Sprint Vision
Accessing Messaging
Now you can send and receive emails and text messages and participate in
Web-based chatrooms right from your phone. Messaging allows you to stay
connected to friends, family, and coworkers 24 hours a day anywhere on
the home network.
Message Types
There are many types of text messaging available on your phone. These
include SMS Text Messaging, Instant Messaging, and email.
(Voicemail provides voicemail-to-mailbox messaging. For information on
using your phone’s voicemail feature, see “Using Voicemail” on page 200.)
Accessing Email Providers
With Sprint Vision, you can use popular email services such as Yahoo!®
Mail to keep in touch, even while you’re on the go.
To access email providers from your phone:
1. From the Sprint Vision home page, select Messaging > Email.
2. Select an email provider.
3. Use your keypad to enter the required sign-in information for the
selected provider, such as user name, email address, and/or
password, and select Sign In. (Your mailbox for the selected
provider will be displayed.)
The information required for sign in will vary depending on the email
provider you are accessing.
Note:
4. Follow the onscreen instructions to read, reply to, compose, send,
and manage messages in your email account.
Section 3B: Sprint Vision
223
Accessing Instant Messaging
Sprint Vision also provides you with access to popular instant messaging
(IM) clients, including AOL® Instant MessengerTM and Yahoo!® Messenger.
To access instant messaging clients from your phone:
1. From the Sprint Vision home page, select Messaging > Instant
Messaging.
2. Select an IM provider, such as AOL Instant Messenger or Yahoo!
Messenger.
3. Use your keypad to enter the required sign-in information for the
selected provider, such as user name and/or password, and select
Sign In. (Your IM screen for the selected provider will be displayed.)
The information required for sign-in will vary depending on the instant
messaging provider you are using.
Note:
4. Follow the onscreen instructions to read, reply to, compose, send,
and manage your IM account.
224
Section 3B: Sprint Vision
Downloading Premium Services Content
With Sprint Vision you have access to a dynamic variety of Premium
Services content, such as downloadable Games, Ringers, Screen Savers,
and other applications. (Additional charges may apply.) The basic steps
required to access and download Premium Services content are outlined
below.
Accessing the Download Menus
To access the Sprint Vision download menus:
1. Select Menu > My Content.
2. Select the type of file you wish to download (Games, Ringers,
Screen Savers, Applications, or IM & Email) and press
.
3. Select Get New and press
.
To access the Sprint Vision download menus from the Web browser:
1. From the Sprint Vision home page, select Downloads.
2. Select Games, Ringers, Screen Savers, or Applications to go to
the corresponding download menu. (For more information on
navigating the Web, see “Navigating the Web” on page 221.)
Selecting an Item to Download
You can search for available items to download in a number of ways:
ⅷ
Featured displays a rotating selection of featured items.
ⅷ
Categories allows you to narrow your search to a general category,
such as Movie/TV Themes for Ringers or College Logos for Screen
Savers. (There may be several pages of available content in a list.
Select Next 9 to view additional items.)
ⅷ
Search allows you to use your keypad to enter search criteria to locate
an item. You may enter an entire word or title or perform a partial-word
search. (For example, entering “goo” returns “Good Ol’ Boy,” “The
Good, the Bad, and the Ugly,” and “Goofy - Club”.)
Section 3B: Sprint Vision
225
Downloading an Item
Once you’ve selected an item you wish to download, highlight it and press
or press OK (
). You will see a summary page for the item
including its title, the vendor, the download detail, the file size, and the
cost. Links allow you to view the License Details page, which outlines the
price, license type, and length of license for the download, and the Terms
of Use page, which details the Premium Services Terms of Use and your
responsibility for payment.
To download a selected item:
1. From the information page, select Buy. (The item will download
automatically. When the New Download screen appears, the item
has been successfully downloaded to your phone.)
If you have not previously purchased an item, you will be prompted to
create your purchasing profile.
Note:
2. Select an option to continue:
Ⅲ Select Use (left softkey) to assign the downloaded item (or to
start, in the case of a game or application). Your Sprint Vision
session will end and you will be redirected to the appropriate
phone menu screen.
Ⅲ Select Shop (right softkey) to browse for other items to
download.
Ⅲ Press
to quit the browser and return to standby mode.
226
Section 3B: Sprint Vision
Exploring the Web
With Web access you can browse full-color graphic versions of your
favorite Web sites, making it easier than ever to stay informed while on the
go. Follow sports scores and breaking news and weather and shop on your
phone anywhere on the home network.
In addition to the features already covered in this section, the Sprint Vision
home page offers access to these colorful, graphically rich Web categories,
including News, Weather, Entertainment, Sports, Finance, Travel,
Shopping, Tools, and Business Links, as well as useful management
options including My Account and Search. Many sites are available under
more than one menu – choose the one that's most convenient for you.
Using the Browser Menu
Navigating the Web from your phone using the Sprint Vision home page is
easy once you get the hang of it. For details on how to navigate the Web,
select menu items, and more, see “Navigating the Web” on page 221.
Although the Sprint Vision home page offers a broad and convenient array
of sites and services for you to browse, not all sites are represented, and
certain functions, such as going directly to specific Web sites, are not
available. For these and other functions, you will need to use the browser
menu. The browser menu offers additional functionality to expand your use
of the Web on your phone.
.Opening the Browser Menu
The browser menu may be opened anytime you have an active
Sprint Vision session, from any page you are viewing.
To open the browser menu:
ᮣ
Press the right softkey. (The browser menu will be displayed in a
drop-down list.)
Options available under the browser menu include:
ⅷ
Home. Returns the browser to the Sprint Vision home page.
Section 3B: Sprint Vision
227
ⅷ
Forward. Returns you to a previously viewed page (after having used
the key).
ⅷ
ⅷ
Mark this Page. Allows you to bookmark the current site.
View Bookmarks. Allows you to access bookmarked sites, and
manage your bookmarks.
ⅷ
ⅷ
Search. Launches a Google search.
Send page to.... Allows you to send the current page as a text
message.
ⅷ
ⅷ
Go to URL. Allows you to navigate directly to a Web site by entering its
URL (Web site address).
History. Keeps a list of links to your most recently visited sites. To
navigate to a site, highlight it and press
, then select Connect.
ⅷ
ⅷ
Refresh this page. Reloads the current Web page.
More. Displays additional options:
Ⅲ Show URL. Displays the URL of the site you're currently
viewing.
Ⅲ Restart Browser. Refreshes the current browser session.
the browser when accessing the URL.
Ⅲ About Browser. Displays technical information about the
browser, its version, and the encryption version, and provides
links to Certificate Information for the various components.
Ⅲ Preferences. Displays all the preferences available for the
browser.
Creating a Bookmark
Bookmarks allow you to store the address of your favorite Web sites for
easy access at a later time.
To create a bookmark:
1. Go to the Web page you want to mark.
2. Press the right softkey to open the browser menu.
3. Select Mark this Page and press
4. Press to exit pop-up screen.
to save the bookmark.
228
Section 3B: Sprint Vision
Bookmarking a page does not store the page’s contents, just its
address.
Note:
Some pages cannot be bookmarked. Whether a particular Web page
may be marked is controlled by its creator.
Accessing a Bookmark
To access a bookmark:
1. Press the right softkey to open the browser menu.
2. Select View Bookmarks.
3. Scroll to highlight the bookmark you’d like to access and press
to go to the Web site (or press the number corresponding to the
bookmark you wish to access).
Deleting a Bookmark
To delete a bookmark:
1. Press the right softkey to open the browser menu.
2. Select View Bookmarks.
3. Scroll to highlight the bookmark you’d like to delete and press
Options (
).
4. Select Delete and press
.
5. Select OK (
) to confirm and remove the bookmark.
6. Press
to exit pop-up screen.
Going to a Specific Web Site
To go to a particular Web site by entering a URL:
1. Press the right softkey to open the browser menu.
2. Select Go to URL.
3. Use your keypad to enter the URL of the Web site you wish to go to
and press
.
Not all Web sites are viewable on your phone.
Note:
Section 3B: Sprint Vision
229
Reloading a Web Page
To reload (refresh) a Web page:
1. Press the right softkey to open the browser menu.
2. Select Refresh this Page. (The browser will reload the current Web
page.)
Restarting the Web Browser
If the Web browser appears to be malfunctioning or stops responding, you
can usually fix the problem by simply restarting the browser.
To restart the Web browser:
1. Press the right softkey to open the browser menu.
2. Select More > Restart Browser.
230
Section 3B: Sprint Vision
Section 3C
Sprint Power Vision
In This Section
ࡗ ࡗ ࡗ Getting to Know Sprint Power Vision
Exploring the Sprint Music Store
Personalizing Your Service With On Demand
With Sprint Power Vision enjoy the next generation wireless data
experience. Sprint Power Vision offers an enhanced, always-on
experience, including rich, clear video and audio clips (up to five minutes in
length), live interactive 3-D games, and Broadband-like download speeds.
In addition, you can experience all the latest messaging, imaging and
browsing enhancements currently available to Sprint users.
Features such as the Sprint Music Store, On Demand personalized data
services, and the option to use your phone as a modem make Sprint Power
Vision your key to total connectivity. This section introduces these advanced
taking advantage of Sprint Power Vision. For an updated listing of the latest
products and services (which are subject to change) and for more
Section 3C: Sprint Power Vision
231
Getting to Know Sprint Power Vision
Sprint Power Vision combines unmatched visual and sound clarity with
Broadband-like speeds on your wireless phone. Utilizing the fastest
commercially available wireless network technology (1xEV-DO) and taking
advantage of continued investment in handset and application
development, Sprint Power Vision offers the ultimate in wireless
entertainment, real imaging solutions, instant communication, and a
personalized information experience at Broadband-like speeds. Your phone
is equipped with the latest in multimedia, imaging, and processing
technology, and offers exclusive services not available on current
Sprint Vision phones, such as access to the Sprint Music Store and
On Demand.
Your phone’s data services work anywhere on the home network. These
services will perform at enhanced speeds and with improved quality in
areas with high-speed data coverage. Go to www.qwest.com or see
our coverage map brochure for coverage details and more information.
Note:
Enabling Sprint Power Vision
Since Sprint Power Vision is an enhancement to your phone's Sprint Vision
capabilities, you don't need to take any extra action to make Sprint Power
Vision available. As long as your phone's Sprint Vision setting is enabled
(see “Enabling and Disabling Sprint Vision Services” on page 89), your
phone is ready to access Sprint Power Vision services where available.
When your phone has a Sprint Power Vision connection, the
status indicator (
) will be displayed on the screen. (For details,
see “Sprint Vision Connection Status and Indicators” on page 220.)
232
Section 3C: Sprint Power Vision
SM
Exploring the Sprint Music Store
Your Sprint Power Vision service allows you to access the Sprint Music
Store, an online music distribution site that lets you purchase and
download digital music files to play on your Sprint Power Vision phone.
Accessing the Sprint Music Store
You can access the Sprint Music Store right from your phone’s main menu,
anywhere on thehome network. When you enter the store for the first time,
you will be prompted to set up your user identification and password.
To access the Sprint Music Store:
1. Select Menu > Music.
2. Follow the onscreen instructions to establish your User ID
and password.
Your User ID for the Sprint Music Store is your ten-digit wireless phone
number. The password may be any four-digit number. The
recommended password is the last four digits of your Social Security
number.
Tip:
3. Use your keypad and navigation key to explore the store.
Section 3C: Sprint Power Vision
233
Purchasing and Downloading Music
Now that you’re in the store, you can shop for songs to purchase and
download to your phone’s mass storage.
To find and download music files from the Sprint Music Store:
1. From the Sprint Music Store opening page, select an option to
browse the store:
Ⅲ Featured Music offers a revolving selection of highlighted
songs and artists.
Ⅲ Categories allows you to choose from categories such as
What’s Hot, New This Week, and specific musical genres.
Ⅲ Search gives you the option of searching for specific songs or
artists. Just use your keypad to enter your search criteria in the
available field.
2. Highlight the song you want and press
. (The song information
screen will be displayed.)
3. Select an option and press
:
Ⅲ Preview to play an audio clip of the selected song.
Ⅲ Buy Song to purchase the song and download it to your
phone’s mass storage.
ࡗ When you select Buy Song, the file will automatically download to your phone’s mass storage. (If there is not
enough free memory space, you will see an alert.)
ࡗ Once the song has been downloaded to your mass storage, you will see options allowing you to listen to the song, add it
to a playlist, or continue shopping.
Backing Up Your Downloaded Music Files
Store, you get two versions of the song: one to download and play on
your phone (file type: AAC+), and another to download from
http://musicstore.qwest.com and play on your PC (file type: WMA).
The AAC+ files downloaded to your phone can only be played on your
234
Section 3C: Sprint Power Vision
phone and on your account, and once they have been downloaded, they
cannot be downloaded again without being repurchased.
Qwest recommends you back up your AAC+ music files to your PC so you
may access the files in case your memory is damaged.
Although you can store AAC+ files on your PC, they will be playable only
on your phone and on your account.
Note:
Playing Music From the Sprint Music Store
The Sprint Music Store not only gives you access to great music, it also
gives you a place to listen to and organize your music library.
Accessing the Music Player
1. From the Sprint Music Store opening page, use your right navigation
key to select the Player tab.
2. From the Player display, select an option:
Ⅲ All My Music to browse through all of your downloaded music.
Ⅲ <playlist> to select a customized playlist you’ve created to
organize your music.
Ⅲ Create Playlist... to set up a custom playlist of songs you like
to hear together. Follow the onscreen instructions to create a
name for the playlist, select songs by artist, genre, and title,
and create an order for the playlist.
3. Once you’ve displayed a list of songs, you can browse through your
available titles by Song, Artist, or Genre to select a specific song.
Ⅲ To play a song, select it and press Play (
).
to open the
Ⅲ To listen to a playlist, select it and press
playlist, then press
again to begin playing from the
selected song. (You can also highlight the playlist and use the
softkey menu to begin listening.)
Section 3C: Sprint Power Vision
235
Personalizing Your Service With
On Demand
The On Demand feature from Sprint Power Vision makes it easier than ever
to retrieve the most popular Web information and categories instantly. On
Demand uses the ZIP code you provide to customize the content it retrieves
to your area, so you can get the information you want, when you want it.
On Demand acts like a PC browser’s customized home page, displaying a
variety of top categories such as News, Sports, Weather, Money, Movies,
and more, tailored to your preferred area. These categories and the
associated information are updated continuously throughout the day, so
you’ll always be up-to-date and in-the-know. In addition to presenting a
number of fixed categories, On Demand also offers optional categories you
can select (for an additional monthly charge), allowing you faster access to
the information you really want.
Initializing Your On Demand Service
To initialize your phone’s On Demand service:
1. Select Menu > On Demand.
2. Enter your preferred ZIP code and press Done (left softkey). (The On
Demand service will customize itself to your selected location and
the On Demand menu screen will be displayed.)
Accessing On Demand Information
Finding the information you’re looking for with On Demand is as easy as
navigating a Web browser on your PC. (The following examples will
illustrate how to access News and Movies information.)
To access News information using On Demand:
1. Select Menu > On Demand. (The On Demand menu screen will be
displayed.)
2. From the On Demand menu screen, highlight a category (in this
case, News) and press
.
236
Section 3C: Sprint Power Vision
3. Depending on which category you select, you will see a menu with
additional options. (For this example, you would be able to select
from such subcategories as “Top Stories,” “USA News,” “World
News,” and “Politics.”)
4. Select a subcategory, then select an article you would like to view
and press
. (The article will be displayed.)
5. Use your navigation key to scroll through the article.
If applicable, the left and right softkeys will offer additional options:
Ⅲ Left Softkey - If there is a related story or an image
accompanying the article, that link will be available by pressing
your left softkey. The left softkey functions as an action key in
the On Demand service.
Ⅲ Right Softkey - Your right softkey will be a Menu button,
allowing you to return to the main On Demand menu and
offering additional navigation options.
To access Movies information using On Demand:
1. From the On Demand menu screen, highlight Movies and press
. (A list of current movie titles will be displayed.)
2. Select a movie title and press
.
3. From the Movie Title display, select an option and follow the
onscreen instructions. Options available may include:
Ⅲ Date to select a date for the movie.
Ⅲ Details to view the movie’s details, which may include cast,
running time, plot synopsis, MPAA rating, reviews, etc.
Ⅲ <theater listing> to view the movie’s showtimes at a number
of selected movie theaters in your area. Follow the onscreen
instructions to purchase will-call tickets (may not be available
for all theaters or for all showtimes).
Additional fixed On Demand categories such as Money (which features a
customizable stock ticker [delayed 20 minutes]), Weather, and Sports
(which allows you to select your top teams), along with optional categories
such as Maps and TV Guide, bring the information you want right to your
screen – all without having to go through a traditional Web search.
Section 3C: Sprint Power Vision
237
238
240
Section 4A
Important Safety Information
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ General Precautions
Maintaining Safe Use of and Access to Your Phone
Caring for the Battery
Using Your Phone With a Hearing Aid Device
Radio Frequency (RF) Energy
Owner’s Record
Phone Guide Proprietary Notice
This phone guide contains important operational and safety
information that will help you safely use your phone. Failure to read
and follow the information provided in this phone guide may result in
serious bodily injury, death, or property damage.
Section 4A: Important Safety Information
241
General Precautions
There are several simple guidelines to operating your phone properly and maintaining safe,
satisfactory service.
ⅷ
Speak directly into the mouthpiece.
ⅷ
Avoid exposing your phone and accessories to rain or liquid spills. If your phone does
get wet, immediately turn the power off and remove the battery.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending, or sitting on it.
Any changes or modifications to your phone not expressly approved in this document
could void your warranty for this equipment and void your authority to operate this
equipment.
ⅷ
ⅷ
For the best care of your phone, ensure that only authorized personnel
service your phone and accessories. Failure to do so may be dangerous
and void your warranty.
Note:
242
Section 4A: Important Safety Information
Maintaining Safe Use of and Access to
Your Phone
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee connection in all
conditions. Therefore you should never rely solely upon any mobile phone for essential
communication (e.g., medical emergencies). Emergency calls may not be possible on all
cellular networks or when certain network services or mobile phone features are in use.
Check with your local service provider for details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a hands-free device) is
prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety
always comes first.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special regulations in a given
area. Turn your phone off in areas where use is forbidden or when it may cause interference
or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals. However,
RF signals from wireless phones may affect inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded electronic operating
systems and/or entertainment systems in motor vehicles. Check with the manufacturer or
their representative to determine if these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any equipment that has been added to
your vehicle.
Consult the manufacturer of any personal medical devices, such as pacemakers and
hearing aids, to determine if they are adequately shielded from external RF signals.
Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Note:
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible interference with
aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to
have permission from a crew member to use your phone while the plane is on the ground.
To prevent any risk of interference, FCC regulations prohibit using your phone while the
plane is in the air.
Section 4A: Important Safety Information
243
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off when in a blasting area or
in other areas with signs indicating two-way radios should be turned off. Construction
crews often use remote-control RF devices to set off explosives.
Turn your phone off when you’re in any area that has a potentially explosive atmosphere.
Although it’s rare, your phone and accessories could generate sparks. Sparks can cause an
explosion or fire, resulting in bodily injury or even death. These areas are often, but not
always, clearly marked. They include:
ⅷ
ⅷ
ⅷ
ⅷ
Fueling areas such as gas stations.
Below deck on boats.
Fuel or chemical transfer or storage facilities.
Areas where the air contains chemicals or particles such as grain, dust, or metal
powders.
ⅷ
Any other area where you would normally be advised to turn off your vehicle’s engine.
Never transport or store flammable gas, flammable liquids, or
explosives in the compartment of your vehicle that contains your phone
or accessories.
Note:
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they could hurt themselves
and others, damage the phone or make calls that increase your invoice.
244
Section 4A: Important Safety Information
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s performance.
Recently, there have been some public reports of wireless phone batteries overheating,
catching fire, or exploding. It appears that many, if not all, of these reports involve
counterfeit or inexpensive, aftermarket-brand batteries with unknown or questionable
manufacturing standards. Qwest is not aware of similar problems with Qwest phones
resulting from the proper use of batteries and accessories approved by Qwest or the
manufacturer of your phone. Use only Qwest- or manufacturer-approved batteries and
accessories found through your phone’s manufacturer, or online at:
ⅷ
In order to avoid damage, charge the battery only in temperatures that range from 32°
F to 113° F (0° C to 45° C).
ⅷ
Don’t use the battery charger in direct sunlight or in high humidity areas, such as the
bathroom.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Never dispose of the battery by incineration.
Keep the metal contacts on top of the battery clean.
Don’t attempt to disassemble or short-circuit the battery.
The battery may need recharging if it has not been used for a long period of time.
It’s best to replace the battery when it no longer provides acceptable performance. It
can be recharged hundreds of times before it needs replacing.
Don’t store the battery in high temperature areas for long periods of time. It’s best to
follow these storage rules:
ⅷ
Ⅲ
Less than one month:
-4° F to 140° F (-20° C to 60° C)
Ⅲ
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your nearest authorized service
center.
Special Note: Be sure to dispose of your battery properly. In some areas, the disposal
of batteries in household or office trash may be prohibited.
Section 4A: Important Safety Information
245
Using Your Phone With a Hearing Aid Device
Your phone has been tested for hearing aid device compatibility. When some wireless
phones are used near some hearing devices (hearing aids and cochlear implants), users
may detect a buzzing, humming, or whining noise. Some hearing devices are more immune
than others to this interference noise and phones also vary in the amount of interference
they generate.
The wireless telephone industry has developed ratings for some of their mobile phones, to
assist hearing device users in finding phones that may be compatible with their hearing
devices. Not all phones have been rated. Phones that have been rated have a label located
on the box.
Your M520 phone by Samsung has an M4 rating.
These ratings are not guarantees. Results will vary depending on the level of immunity of
your hearing device and degree of your hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to use a rated phone successfully. Trying
out the phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less
interference to hearing devices than phones that are not labeled. M4 is the better/higher of
the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable
with a hearing device's telecoil ("T Switch" or "Telephone Switch") than unrated phones. T4
is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in
them.)
The more immune your hearing aid device is, the less likely you are to experience
interference noise from your wireless phone. Hearing aid devices should have ratings
similar to phones. Ask your hearing healthcare professional for the rating of your hearing
aid. Add the rating of your hearing aid and your phone to determine probable usability:
ⅷ
ⅷ
ⅷ
Any combined rating equal to or greater than six offers best use.
Any combined rating equal to five is considered normal use.
Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a combined rating of
six for "best use." This is synonymous for T ratings.
It is suggested that you experiment with multiple phones (even those not labeled M3/T3 or
M4/T4) while in the store to find the one that works best with your hearing aid device.
246
Section 4A: Important Safety Information
To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary
transmitters such as Bluetooth and WLAN components must be disabled during a call. See
“Turning Bluetooth On and Off” on page XX for instructions to disable these components.
Getting the Best Hearing Device Experience With Your Phone
To further minimize interference:
ⅷ
Set the phone’s display and keypad backlight settings to ensure the minimum time
interval:
1. Select Menu > Settings > Display > Backlight.
2. Select Slider Up, 30 seconds, 15 seconds, or 8 seconds and press
3. Select the minimum time settings (8 seconds) and press
.
.
ⅷ
Phones with embedded antennas may produce more interference.
Section 4A: Important Safety Information
247
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and
transmits radio frequency (RF) signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital
mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the American
National Standards Institute (ANSI) joined in updating ANSI’s 1982 standard for safety levels
with respect to human exposure to RF signals. More than 120 scientists, engineers and
physicians from universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993, the Federal
Communications Commission (FCC) adopted this updated standard in a regulation. In
August 1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE
standard and the guidelines published by the National Council of Radiation Protection and
Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your
approved accessories may violate FCC RF exposure guidelines.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the
head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring, and calculation
process. It does not represent how much RF the phone emits. All phone models are tested
at their highest value in strict laboratory settings. But when in operation, the SAR of a phone
can be substantially less than the level reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna, phone design and other factors.
What is important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial margin of
safety. As stated above, variations in SAR values between different model phones do not
mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public.
The highest reported SAR values of the M520 are:
248
Section 4A: Important Safety Information
CDMA mode (Part 22):
Head: 1.08 W/kg; Body-worn: 0.672 W/kg
PCS mode (Part 24):
Head: 0.993 W/kg; Body-worn: 0.761 W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number: A3LSPHM520.
More information on the phone's SAR can be found from the following FCC Web site:
Section 4A: Important Safety Information
249
Owner’s Record
The model number, regulatory number and serial number are located on a nameplate inside
the battery compartment. Record the serial number in the space provided below. This will
be helpful if you need to contact us about your phone in the future.
Model: M520 by Samsung®
Serial No.:
250
Section 4A: Important Safety Information
Phone Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more of the
following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
Phone Guide template version Version 6A (052806).
Section 4A: Important Safety Information
251
252
Section 4B
Manufacturer’s Warranty
In This Section
ࡗ Manufacturer’s Warranty
Your phone has been designed to provide you with reliable, worry-
free service. If for any reason you have a problem with your equipment,
please refer to the manufacturer’s warranty in this section.
Section 4B: Manufacturer’s Warranty
253
Manufacturer’s Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
(“SAMSUNG”) warrants to the original purchaser (“Purchaser”) that SAMSUNG’s Phones
and accessories (“Products”) are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of purchase and
continuing for the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch/Holster
Game Pad
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by
Purchaser. This Limited Warranty does not cover: (a) defects or damage resulting from
accident, misuse, abuse, neglect, unusual physical, electrical or electromechanical stress,
or modification of any part of Product, including antenna, or cosmetic damage; (b)
equipment that has the serial number removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in conjunction with accessories, products, or
ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g) Product used or purchased outside
the United States or Canada. This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this Limited Warranty does not
cover any battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are
broken or show evidence of tampering, or (iii) the battery has been used in equipment other
than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable warranty period, SAMSUNG will
repair or replace, at SAMSUNG’s sole option, without charge to Purchaser, any defective
component part of Product. To obtain service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in an adequate container for shipping,
accompanied by Purchaser’s sales receipt or comparable substitute proof of sale showing
the date of purchase, the serial number of Product and the sellers’ name and address. To
obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-
987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
254
Section 4B: Manufacturer’s Warranty
SAMSUNG may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with a rebuilt, reconditioned or
new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a
period of ninety (90) days. All other repaired/replaced Product will be warranted for a period
equal to the remainder of the original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components, boards and equipment shall
become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered
by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the
repair or return of such Product.
What Are the Limits on SAMSUNG’s Liability? EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
“WARRANTIES OF TITLE OR NON-INFRINGEMENT;
“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE
AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY
FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU.
Section 4B: Manufacturer’s Warranty
255
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,
SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR
AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES
OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT
VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS
THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG,
and SAMSUNG’s Product pricing reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG. Accordingly, additional statements such as
dealer advertising or presentation, whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice. [011604]
256
Section 4B: Manufacturer’s Warranty
Bluetooth Wireless Technology
Bookmarks
Index
Numerics
3-Way Calling 212
Accessing 229
Creating 228
Deleting 229
A
Abbreviated Dialing 73
Making 73
Browser Menu 227
C
Airplane Mode 67, 70, 71
Alarm Clock 117
Answering Calls 36
Application Volume 56
Applications 21
Calculator 123
Call Answer Mode 74
Call Forwarding 213
Call Guard 95
Auto-Answer Mode 72
Auto-Erase 64
Call History 97–102
Erasing 102
Making a Call 100
Prepending a Phone Number
102
Saving a Phone Number 101
Call Setup Options 72
Call Waiting 212
Caller ID 211
Camcorder 149–151
Camera 143–148
Changing
Alternative Fonts 54
Dialing Font 54
B
Backlight
Changing keypad setting 53
Changing main display setting
53
PowerSave Mode 53
Battery 23–27
Capacity 23
Charging 26
Installing 24
Removing 25
Bletooth Device Type 194
Bluetooth
Dialing Font Color 54
Dialing Font Size 55
Compact Flash card
microSD 29
Address 192
Device Info 192
FTP File Exchange 196
Pairing 195
TransFlash 29
Contacts 103–111
Adding a Phone Number 108
Adding an Entry 104
Dialing From 44
Settings 191
Status Indicators 190
Supported Profiles 193
Visibility 192
Editing a Phone Number 108
Voice Caller ID 192
Index
257
Editing an Entry 110
Entry Options 107
Erasing 84
Finding Entries 105
Contacts Match 74
Countdown 125
T9 Text Input 46
Erase
Read Messages 64
Erasing
Web Cookies 83
Web History 83, 84
Exterior Phone Features 15
D
F
Data Roam Guard 96
Delete
FTP Contents Folder 196
Read Messages 64
Dialing Options 35
Directory Assistance 7
Display
G
Game Vibrate 56
Games 21
Brightness 52
Text Greeting 52
Display Language 71
Display Screen 17
Downloading
Applications 21
Games 21
Ringers 21
I
Instant Messaging 224
Internet 21
K
Key Functions 13
Key Tones 59
Length 59
Type 59
Screen Savers 21
Downloads
Volume 59
Sprint Vision 225
L
Location Settings 61
Lock Code
Changing 80
Lock Services 81
Locking Sprint Power Vision 81
Locking Voice Service 81
Locking Your Phone 79
E
Email 21
Email Providers 223
Enhanced 911 (E911) 38
Entering Text 45–49
ABC Mode 47
Dual Language 48
Emoticons 49
Numbers 49
Preset Messages 49
Recent Messages 49
Symbols 49
M
Making Calls 34
Media Player 169–178
258
Index
Playing Video and Audio Clips
172
P
Phone (Illus.) 15
Memo Pad 118
Memory
Phone Number
Installing the microSD 29
microSD Memory Card 29
Messaging
Deleting Old Messages 64
Setting Alerts 62
Setting Message Reminders
63
Signature 64
Multimedia
Channel Listings 171
Channel Options 170
FAQs 177
Finding 42
With Pauses 42
Phone Settings 51–75
Call Answer Mode 74
Location Settings 61
Messaging Settings 62–66
TTY Use 68–69
PictBridge Printing 165
Picture/Video
Multitasking 174
Multimedia Service 170
Music Store
Accessing 233
Backing up your downloads
234
Erasing 85
Locking Pic/Video 80
Plus (+) Code Dialing 43
Podcast
Channel Options 181
Channel Preferences 182
Create an Account 185
Launching 180
Listening to 183
Registration 185
Synchronizing 186
Preset Messages 49
Exploring 233
Playing Music 235
Purchasing and Downloading
234
My Content
Erasing 85
N
Q
Net Guard 219
Qwest Customer Service 7
Qwest Service
Account Passwords 6
Directory Assistance 7
Operator Services 7
Setting Up 3
O
On Demand
Accessing 236
Service 236
Index
259
R
Sending 157–159
Uploading Pictures 161
Web Site 160
Resetting
Favorites 87
Sprint Power Vision 21
Email 21
Instant Messaging 21
On Demand 21
Sprint Vision 215–230
Applications 216
Disabling 89
Enabling 89
Phone 88
Phone Settings 87
Picture Account 86
Resetting Your Default Settings
86, 87
Resetting Your Favorites 87
Resetting Your Phone 88
Restriction and Lock
Voice Calls 75
Home Page 218
Launching 218
Ringer Types 57
Messages 58
Messaging 223
Roaming 57
Navigating the Web 221
Net Guard 219
Scheduled Events 58
Voice Calls 57
Security Features 89
User Name 217
Status Light 55
Ringers 21
Roaming 91–96
Setting Roam Mode 94
S
T
Scheduler 114–116
Screen Saver 54
T9 Text Input 46
Taking Pictures 144–148
Task List 124
Text Greeting 52
Text Message Settings 66
Text Messages
Main display 54
Screen Savers 21
Security 77–89
Security Menu 78
Shooting Video 149–151
Silence All 60
Erasing 86
Text Options 50
Auto Capital 50
Display Candidate 50
Dual Language 50
Insert Space 50
Prediction Start 50
Used Word Dictionary 50
SMS Text Messaging 209–211
Special Numbers 82
Speed Dialing 44
Assigning Numbers 109
Sprint Picture Mail
Downloading Pictures 162
Password 145
260
Index
Three-Way Calling 212
TTY 68
Voice Mail 56
volume 56
TTY Use 68–69
Turning Your Phone On and Off
22
W
Web 227–230
World Time 125
U
Unlocking Your Phone 79
Updating Phone Software 70
Using Send Email 134
V
Videos
Options 150
Recording 149
Selecting Settings 152
Storing 153
Voice Memos 139–140
Editing the Caption 141
Erasing 140
Information 141
Recording 139
Reviewing 140
Voice Services 127–138
Voice-Activated Dialing 128–133
Voicemail
Menu Key 207
Options 203
Retrieving 202
Setting Up 5, 200
Volume 56
Alarms 56
Alert Notification 60
Other Volume Settings 56
Picture Mail 56
Ringer Volume 56
Settings 56
Text Message 56
Index
261
|