SCH-R311 Series
P O R T A B L E
M O B I L E
User Manual
D U A L - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
Openwave is a registered Trademark of Openwave, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
®
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 1: Getting Started
This section explains how to start using your Samsung
SCH-R311 phone by activating your service, setting up your
Voicemail, or getting an understanding of how this manual is put
together.
•
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 149.
highlight Use the Navigation key (
) to move a
highlighting effect onto a menu item or screen
item of interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 121.
select
After “highlighting” a menu item or screen item,
press the OK key (
) to launch, access, or save
Notes and Tips
a highlighted menu item or screen field of
interest.
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
➔
Used in place of “select” in long “drill down”
procedure steps.
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Example: Select Settings
➔
Call Settings
➔
Call Answer.
•
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Getting Started
4
3. Place the battery over the battery (1) and press lightly
Installing the Battery
upward (2) until it clicks into place.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
Removing the Battery
1. Press and hold
to turn off the phone (if on).
2. Press down on the battery cover (1) and slide the cover
toward the bottom end of the phone. Lift the cover (2) up
and away from the phone, bottom end first.
1. Insert the top end of the battery first, matching the gold
contacts on the inside of the battery to those on the phone.
2. Press lightly on the bottom end of the battery down into the
phone until it slips into place.
5
3. Lift the bottom of the battery up (1) and away (2) from the
1. Plug the large end of the Travel Adapter into a standard
phone.
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may cause
damage.
+
Use the Travel Adapter
Incorrect
The travel adapter included
with your phone is a
Correct
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Getting Started
6
Low Battery Indicator
Turning Your Phone On
1. If closed, open your phone, as
shown.
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
) in the upper-right corner of the
2. Press
. The display lights.
Three bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
) and a tone sounding
Note: As with any other radio-transmitting
device, do not touch the antenna while
using your phone as this can affect call
quality and can cause the phone to operate
at a higher power level than is necessary.
A blinking empty battery icon (
indicate you have two to three minutes before the battery is too
low to operate the phone.
•
The phone begins searching for a
network signal.
If you continue to use your phone without charging its battery, the
phone will shut down.
Press
•
Once the phone finds a signal, the
time, date, and day appear at the
top of the display.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
•
You’re now ready to place and
receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
Turning Your Phone Off
1. If closed, open your phone.
7
2. Press and hold
for two or more seconds. Your phone
Listen to Voicemail
powers off.
ᮣ
In standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting. You are prompted to enter your
password.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
To dial Voicemail:
1. In standby mode, press and hold
or dial your own
mobile number.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
4
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
PIM Functions
Picture (MMS) Messaging
Text (SMS) Messaging
Email Messaging
5
Built-in VGA Digital Camera
Voice Dial
Features
Note: The R311 phone supports the wireless handsfree profile and the serial
port profile for Bluetooth® wireless technology. The R311 does not
support Bluetooth OBEX profiles.
1. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
2. Camera Lens — The lens of your built-in camera.
9
3. Front Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
Open View (Front) of Your Phone
4. Camera Key — Launches the Camera feature of your
phone and takes photos.
5. Power / Accessory Connector — Used to connect an
optional headset (for hands free operation), or optional TTY
device, charging accessories, or optional accessory cables
to your phone.
Features
1. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
Understanding Your Phone
10
2. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
10. CLR Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
3. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
11. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
4. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
12. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
5. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
13. OK Key — Pressing when navigating through a menu
6. Special Function Keys — Enter special characters. Perform
accepts the highlighted choice in a menu.
various functions.
14. Earpiece / Speaker — Lets you hear ringing and alert
7. Voice Recognition Key — Used to launch VoiceSignal voice
tones, alarm tones, and the other parties to calls.
recognition system.
Command Keys
8. Microphone — Lets the other caller hear you clearly when
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left ( ) and Right
you are speaking to them.
9. Alpha-numeric Keys — Use these keys to enter numbers,
(
).
letters, and characters.
11
Left Soft Key
Send Key
Some functions of the Left soft key ( ) are as follows:
The Send key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
In standby mode, press the Msgs soft key ( ) to launch the
Messages menu.
When the Left soft key function is Edit, press the Edit soft key ( ) to
edit a Contacts entry.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
once to answer calls.
•
to make a call.
Right Soft Key
•
•
Press
Press
twice in standby mode to call the most recent number.
Some functions of the Right soft key ( ) are as follows:
to pick up a waiting call. Press
again to switch back
•
•
•
In standby mode, press the Contacts soft key ( ) to launch the
Contacts Find screen.
When the Right soft key function is Options, press the Options soft key
to the other call.
Clear Key
(
) and a pop-up menu appears.
The CLR key (
) is used to erase or clear numbers, text, or
When the Right soft key function is Back, press the Back soft key (
to back up one menu level.
)
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
OK Key
•
•
•
In standby mode, press the OK key (
In a menu, press
) to launch the Main Menu.
to accept the highlighted selection.
to take a photo or to create a Picture
•
•
To erase the entire sentence, press and hold
.
To back up one menu level, briefly press
.
In camera mode, press
message.
End Key
•
When the OK key function is Edit, press the Edit key (
Draft message.
) to edit a
•
•
•
Press and hold the End key
Briefly press once to disconnect a call.
to return to standby mode from any menu, or to cancel the
to turn your phone on or off.
Press
last input.
Understanding Your Phone
12
Navigation Key
The sample screen shows that pressing the Left (Msgs)
soft key will launch the Messages menu, pressing OK
Use the directional keys on the Navigation key (
) to
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications.
(
) will display the Main Menu, and pressing the Right
Contacts) soft key will show the Contacts Find screen.
(
Camera Key
Display Screen Icons
Use the Camera key (
) on the right side of the phone to
Your R311 phone can show you definitions of the icons that
appear on the top line of the display.
activate the camera built into your phone and to take pictures.
Understanding the Display Screen
1. The top line of your phone’s
To access the Icon Glossary:
ᮣ
In standby mode, press Menu
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top line of the displays.
(
), then select Settings
display contains icons that
➔
➔
indicate network status, battery
power, signal strength,
Dialogue Boxes
connection type, and more.
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
2. The Main Clock shows the day,
date, and time.
3. The center portion of the display shows information such
•
•
•
Choice
–
Example: “Save Message?”
as call progress information, messages, and photos.
Reconfirm
4. The bottom line of the display shows current soft key
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
functions.
–
13
•
•
•
•
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
In standby mode, you will see the time, day, and date as well as
all phone status icons.
–
Placing Calls in Standby Mode
–
1. To place a call while in standby mode, enter a phone
number, and press
.
–
Example: “System Error!”
2. To return to standby mode, press
.
Warning
–
Example: “Low Battery,” “Memory Full!”
Receiving Messages in Standby Mode
Backlights
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
•
•
View Now — This selection allows you to view the messages now.
View Later — This selection allows you to view the messages at a
later date.
Note: During a phone call, the display backlight dims and turns off after 7
seconds to conserve battery power, regardless of the Backlight
setting.
Highlight the desired viewing option and then press
.
Adjusting the Ringer Volume
In standby mode, press the Volume key (on the left side of the
phone) up or down.
Your Phone’s Modes
Standby Mode
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
•
•
After you power the phone on.
When you press after a call or from within a menu.
Understanding Your Phone
14
Options are:
Enter/Exit Silent Mode
• Ringer Off
• Vibrate
• Low
• Medium
• Medium/High
• High
Silences the tones your keypad makes when you press a key.
To enter Silent Mode:
ᮣ
In standby mode, press and hold
. “Entering Silent
• Low/Medium
• Vibrate/High
Mode” briefly appears in the display and your phone
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
returns to standby mode.
To exit Silent Mode:
Tip: You can also enter the Volume
>
Voice Calls sub-menu by pressing Menu
ᮣ
While in Silent mode and standby mode, press and hold
➔
Sounds
➔
Volume
➔
Voice Calls. Use the Volume key on the left side
of your phone to adjust the ringer volume setting.
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate Mode
Vibrate mode. The Vibrate/Ring icon (
) appears in the display when
the phone is in Vibrate/High mode.
In standby mode, repeatedly press the Volume key (
)
down until “Vibrate” appears in the display.
Call Answer Mode
The Volume key is on the left side of phone.
You can choose to answer a call by pressing any key except
or , by pressing only , or by opening the phone’s
Speakerphone Mode
Speakerphone mode increases the sound volume through the
earpiece during a call. This lets you conduct a call handsfree,
and/or lets you share a call with others.
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
15
To enter Speakerphone Mode:
Camera Mode
ᮣ
During a call, press the Options soft key, then select
Speaker On
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
.
Caution!: While in Speakerphone mode, hold your phone away from your ear.
•
Entering Camera Mode — In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
Exiting Camera Mode — Press
To exit Speakerphone Mode:
•
.
ᮣ
During a call, press the Options soft key, then select
Note: You can also enter Camera mode by pressing Menu
(
) and selecting
Speaker Off
.
Multimedia
➔
Camera.
– or –
Input mode
Press
.
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Handsfree Mode
Handsfree mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
Navigation key. Optional input modes are T9 Word
,
Abc
,
ABC
,
123
,
To place your phone in Handsfree mode, do one of the following:
•
Connect an optional wired headset.
– or –
Tip: You can cycle between T9 Word
,
Abc, and 123 by repeatedly pressing
•
Pair and connect with an optional Bluetooth technology headset or
and holding the key until the phone beeps.
Understanding Your Phone
16
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
17
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
2. Press
to place the call.
Dialing International Numbers
Dialing Emergency Numbers
Call Another Country — Manual Method
1. In standby mode, enter 011 (the three-digit exit code for
the United States).
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press
to place the call.
2. Enter the country code for the country that you are calling.
You can specify other numbers as emergency numbers using the
3. Enter the number that you wish to call, then press
.
Note: Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Call Functions
18
Call Another Country — Shortcut Method
1. In standby mode, press and hold
until a plus sign (+) appears in
the display.
Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
Note: When you press
, your phone
automatically replaces this + with 011, the
•
2-Sec Pause — P pause — A two-second pause stops the calling
sequence for two seconds and then automatically sends the remaining
digits.
three-digit exit code for the United States.
2. Enter the country code for the country that you are calling,
•
Wait — W pause — A hard pause stops the calling sequence until you
or press and hold
in the display.
until a second plus sign (+) appears
press
.
To manually call a number with pause(s) without storing it to your
Contacts:
Tip: If you place most or all of your international
calls to numbers in the same country, set-up
the International Dialing shortcut to dial that
country’s code for you. (For more information,
1. Enter the number you wish to call.
2. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
Note: When you press
, your phone
•
•
2-Sec Pause — a two-second pause.
automatically replaces the second + with the
two-digit country code you have selected for
the International Dialing shortcut.
Wait — a hard pause (awaits input from you).
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence,
3. Enter the number that you wish to call, then press
.
press
.
19
Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,
Example: For location number 13, briefly press
, then press and hold
W appears in the display.
until the name and number appear in the display and the number is
dialed.
5. Press
to call the number.
Three-Touch Dialing
Making a Call — Speed Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
Example: For location number 113, briefly press
, briefly press
until the name and number appear
again, then press and hold
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
One-Touch Dialing
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Example: For Speed Dial number 3, press and hold the
key until the
name and number appear in the display and the number is dialed.
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Call Functions
20
Making a Call — Quick Search Dialing
Making a Call — Voice Dialing
Use the Quick Search feature to dial any
number stored in your Contacts list by
pressing the number keys that correspond
to the first few letters of a Contact name.
Your R311 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
Voice Dialing Tips:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
•
•
Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
2. Press the Up navigation key. The
Contact List screen appears
showing the desired Contact name,
as shown.
•
When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
3. If needed, use the Up and Down
navigation keys to highlight the
Contact you wish to call.
1. In standby mode, press and hold
.
“Say a Command” appears in the display and is
pronounced through the earpiece.
4. Press
to call the highlighted Contact.
2. Say, “Call”.
You are prompted to “Say the name or #”.
21
3. Speak clearly and say the name of a person in your
•
“
Mobile
”
Voice Dial dials the specified number.
Contacts list, first name followed by last name.
Dialing a Number
If the name is recognized, Voice Dial repeats the name and
dials the number.
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold
.
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
“Say a Command” appears in the display and is
pronounced through the speaker.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
•
•
Press the Repeat soft key to say the name again.
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
5. Say one of the following number types:
•
•
“
Home
”
“
Work
”
Call Functions
22
– The calling party ends the call.
– The call is sent to voicemail.
•
•
To say the name again, press the Repeat soft key.
To exit Voice Dial without dialing, press
.
Pause Dialing From a Contacts Entry
Answering an Incoming Call
•
If you voice dial a contact that contains (two-second) T pause(s) simply
ᮣ
Open the flip on your phone, if
wait for the pauses to pass and the dialing to complete.
closed, and/or press
. The ring
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
tone and/or vibration stop and the
caller’s voice can be heard in the
earpiece.
Answering a Call
Your phone notifies you of a call in the following ways:
Tip: You can set your phone to automatically
answer calls or to answer calls when you press
any key but the
Answer icon (
page 104.)
key or automatically, as indicated by the Auto
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Ringer Off Vibrate Low Low/
Medium Medium Medium/High High, or Vibrate/High, and/or
,
,
,
,
,
,
The In-Use Options Menu
different ring types to distinguish callers.)
You can access numerous menus and features while in a call.
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
Note: If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to standby mode.
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
1. While in a call, press the Options soft key.
events occurs:
– You answer the call.
– You ignore the call.
23
The following menu items appear in the display:
Adjusting the Call Volume
•
In standby mode, repeatedly press the Volume key (
down until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.
)
•
Contacts — The Contacts Find screen appears in the display.
• Recent Calls — The All Calls Log screen appears in the display.
Calls Log
•
•
•
Send DTMF — Send your phone number as DTMF tones.
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Voice Privacy — Select Standard or Enhanced voice privacy.
Review the Calls Log
1. In standby mode, press Menu (
• Speaker On Off — Enables/disables Speakerphone mode during
/
), then select Calls.
The following Calls logs and options appear in the display:
Do one of the following:
• Outgoing Calls
• Incoming Calls
•
•
Select the desired sub-menu or feature.
Exit the menu by pressing
.
• Missed Calls
• All Calls
Tip: You can block/restore sound going to the other parties on this call by
pressing the Mute / Unmute soft key. This can reduce noise on
conference calls.
• Data Calls
• Call Timer
Ignoring a Call
• Data Counter
2. Select the Calls log that you wish to review or the function
you wish to access.
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
ᮣ
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
Call Functions
24
•
Details — Calls to Contacts Only — Shows the entry for the called
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
Contact.
•
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
4. Press the Msgs soft key to launch the Send Message
menu. The following options appear in the display:
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
•
Text Message — Lets you send a text message to the selected
number called.
•
Picture Message — Lets you send a picture message to the
selected number called.
1. At the Calls menu, select Outgoing Calls. A list of your
outgoing calls appears in the display.
2. Highlight a call, then press OPEN (
) to view the Name
of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the
duration of the call (in minutes and seconds).
5. Select the desired message type to compose a message.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
Save — Save the number to your Contacts.
1. At the Calls menu, select Incoming Calls. A list of your
25
Incoming calls appears in the display.
2. Highlight a call, then press OPEN (
) to view the Name
5. Select an option to perform its function.
of the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
1. At the Calls menu, select Missed Calls. A list of your
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
missed calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
•
•
•
•
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
4. Press the Msgs soft key. The following options appear in
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
the display:
•
Text Message — Lets you send a text message to the selected
calling number.
•
•
•
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
•
Picture Message — Lets you send a picture message to the
selected calling number.
Call Functions
26
•
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
4. Press the Msgs soft key. The following options appear in
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
the display:
•
Text Message — Lets you send a text message to the selected
called number.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
•
Picture Message — Lets you send a picture message to the
selected called number.
4. Press the Msgs soft key. The following options appear in
the display:
5. Select an option to perform its function.
•
Text Message — Lets you send a text message to the selected
calling/called number.
All Calls
•
Picture Message — Lets you send a picture message to the
selected calling/called number.
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. At the Calls menu, select All Calls. A list of all logged calls
5. Select an option to perform its function.
appears in the display.
Data Calls
2. Highlight a call, then press OPEN (
) to view further
Your phone retains information about the last 10 data calls and
stores them in the Data call log. You can review the Data call log
for the time and date of the call, as well as other information.
information about the call.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
27
1. At the Calls menu, select Data Calls. A list of your data
•
•
Last Call — View the duration of your last call.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
calls appears in the display.
2. Highlight a data call, then press OPEN (
) to view
•
•
•
Incoming Calls — View the duration of the total incoming calls
received on your phone since the last erasure.
further information about the call.
3. Press the Options soft key. A pop-up menu containing the
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
following options appears in the display:
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
•
•
•
Erase — Erase the selected call from your Data call log.
Lock Unlock — Blocks / permits erasure of this Data call entry.
/
•
•
Last Reset — View the time and date all timers were last reset.
Erase All — Erase all calls from your Data call log.
Lifetime Calls — View the duration of all calls since your phone
was activated.
Data Counter — Shows the amount of data Transmitted and
Received during this call, the Total amount of data exchanged
during this call, and the total amount of data exchanged since the
phone was activated.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
4. Select an option to perform its function.
3. To reset all counters except Lifetime Calls, press the Reset
Call Timer
All soft key.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
4. To exit the Call Timer list, press
or
.
Note: Call Timer is not for billing purposes.
Note: Although most call timers can be erased, the Lifetime call timer can
never be erased.
1. At the Calls menu, select Call Timer. The following timers
appear in the display:
Call Functions
28
Data Counter
3. To reset all counters except Lifetime Data Counter, press
the Reset All soft key.
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
4. To exit the Call Timer list, press
or
.
Note: Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Note: Data Counter is not for billing purposes.
Roaming
What is Roaming?
1. At the Calls menu, select Data Counter. The following
options appear in the display:
Roaming lets you use your R311 phone when you travel outside
of your Wireless Carrier’s coverage area. The Roaming icon
•
•
•
Transmit — View the total amount of data transmitted by your
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
Total — View the total amount of data sent or received by your
phone since the last reset.
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
(
) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Carrier for more information about
Roaming.
•
•
How Roaming Works
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
29
•
•
Home Only — Your phone is available for normal operation only in the
designated coverage area.
Automatic — Your Wireless Carrier’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Call Functions
30
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
4. Press the Back soft key to return to the previous menu.
Return to the Previous Menu
•
Press the Back soft key to return to a previous menu.
When Back does not appear in the display, press
previous menu.
Menu Navigation
Access the menus and sub menus in your phone using the
•
to return to the
navigation key (
shortcut.
) and soft keys (
), or use a
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
1. In standby mode, press Menu (
). The first of several
menus appears in the display.
My Images*
Note: More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
easyedgeSM
Tip: You can launch any of the Main Menus by using a voice command — In
Settings
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to easyedge” to access the
easyedgeSM menu.
Ringer Type
2. Use the navigation key to browse through the menus.
3. To enter the menu or sub menu that appears in the display,
* My Images can be customized. Press Menu
Phone Settings Shortcut Key
(
), then select Settings
➔
➔
.
press
.
31
to the first few letters of the menu or menu item name, as
shown.
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. After pressing Menu (
), press the menu number to
2. Press the Down navigation key. The
Menu List screen appears showing
the matching menus and/or menu
items, as shown.
go directly to the menu or sub menu of your choice. Before you
can navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
1. In standby mode, press Menu (
).
3. Select the desired menu or menu
item. The associated screen appears
in the display.
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Example: Press Menu ( ), then press
,
. This takes you to the
Tools menu (Menu 8), and then to the Calculator (sub menu 5).
Navigate Using Quick Search
Use the Quick Search feature to find a
menu or menu item by pressing the
number keys that correspond to the first
few letters of menu or menu item name.
Quick Search Accessing a Menu
To find and access a menu or menu item, do the following:
1. In standby mode, press the number keys that correspond
Menu Navigation
32
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad. This section
also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
The current text entry mode (T9 Word Abc, ABC, 123, or Symbols)
,
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
is indicated in the lower part of a text entry screen. To change the
text entry mode while composing a text message:
ᮣ
Repeatedly press and hold
to toggle between Abc,
123, and T9Word modes.
•
T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
Or, do the following:
1. Press the Left soft key.
–
–
–
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
T9 word — Enter all lower case letters
2. Highlight one of the following text entry modes:
• T9Word
• Abc
•
Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
• ABC
• 123
–
–
–
Abc — Enter initial capital letters
ABC — Enter all upper case letters
abc — Enter all lower case letters
• Symbols
3. Press
.
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
33
®
Using T9 Mode
Note: To enter a space, press the
key. To enter a period, press the
key. These key functions apply to both T9 Word and Abc modes. (For
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
Using Abc Mode
1. While composing a text message, press the Left soft key,
then select Abc or ABC
.
1. While composing a text message, press the Left soft key,
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
then select T9Word
.
2. For practice, enter the word “Samsung” by pressing each
of the following keys only once:
Example: Press
once for “G” and twice for “H”.
3. Pause briefly and the displayed character is accepted and
S
A
M
S
U
N
G
inserted into your message.
T9 Word recognizes that the most commonly used word for
the numeric sequence you just entered is “Samsung.”
4. To enter a space, press
. To enter a period, press
.
Entering Numbers
Enter numbers into a text message while in 123 mode.
If more than one word shares the same numeric sequence,
T9 Word pops-up the most commonly useds. Press the
Navigation key Up or Down to display other words, if
available.
1. While composing a text message, press the Left soft key,
then select 123
.
Entering Text
34
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1. While composing a text message, press the Left soft key,
then select Symbols. The first of three symbol screens
appears in the display.
2. Use the Prev and Next soft keys to page through the other
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example: Press
for an exclamation point (!).
4. Repeat these steps to insert additional symbols into your
message.
35
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
The following options appear in the display:
• Find — Find a Contacts entry by name.
Tip: You can also access the Find option from standby mode, by pressing the
Contacts
Contacts soft key or by pressing and holding
until the phone
prompts, “Say a command.” Say “Lookup” followed by a Contact
name into the microphone.
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one Email address.
Each phone number can be up to 32 digits in length, including 2-
more information), and associated names can be up to 32
characters in length. You can assign the Speed Dial numbers of
your choice for each entry. You can also mark your Contacts list
as Restricted to prevent unauthorized viewing. (For more
• Add New Contact — Add a number or Email address to your
Contacts.
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
• Memory Info — Display used and available memory for Contacts
Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch
,
entries.
2. Select the option of your choice.
Open Contacts
1. In standby mode, press Menu (
Note: You can also press the keypad number key that corresponds to the
menu option number.
), then select Contacts.
Tip: To launch the Contacts menu using a voice command — In standby
mode, press and hold until the phone prompts, “Say a command.”
Say “Go to Contacts” into the microphone.
Understanding Your Contacts
36
•
•
•
•
Press
Press the Edit soft key to add or change information for this entry.
Press VIEW ) to show information about the entry.
to dial the number associated with the name.
Finding a Contacts Entry
Shortcut Key Method
(
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly by entering the first few letters of a Contact’s name.
Press the Options soft key. The following options appear in the
display:
1. In standby mode, press the Contacts soft key.
–
–
–
New Contact — Add a new entry to Contacts.
The Find screen appears in the display with the Go To field
highlighted, followed by the first few names in your
Contacts list.
Erase — Erase the name and associated information.
Send Txt Msg — Create and send a text message to the selected
Contact.
–
Send Pic Msg — Create and send a picture message to the selected
Contact.
Tip: You can also access the Find screen/function from standby mode by
doing one of the following:
–
–
Call — Dial the number associated with the name.
– Press Menu
(
), then select Contacts
➔
Find.
Send Name Card Via Bluetooth — Send selected Contacts to
another Bluetooth device.
– Press and hold
until the phone prompts, “Say a command.” Say
Select the desired option to access its sub-menu appears in the display.
“Lookup” followed by a Contact name into the microphone.
Voice Method
2. Enter the first few characters of a name as entered in
Contacts. For example, if you saved the name as “Amy
Smith”, begin the search by pressing (for “A”).
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
As you enter letters, the names of the closest matches
appear in the display.
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
3. When the desired entry is listed in the display, use the Up/
Down navigation keys to highlight the entry.
37
To look up information for a specific contact:
1. In standby mode, press and hold
VoiceSignal.
5. The contact information for the name you selected appears
to launch
in the display.
•
•
To dial the number associated with the name, press
.
To remove this entry from your Contacts list, press the Erase soft
key.
“Say a Command” appears in the display and is
pronounced through the speaker.
•
•
To add or change information for this entry, press EDIT
(
).
2. Say “Lookup”.
To access the following options, press the Options soft key.
VoiceSignal prompts you to “Say the name.
”
–
–
Send Txt Msg — Create and send a text message to the selected
Contact.
3. Speak clearly and say the full name of the person you want
Send Pic Msg — Create and send a picture message to the selected
Contact.
to call, exactly as it is entered in your Contacts list.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
–
–
Call — Dial the number associated with the Contact name.
Send Name Card Via Bluetooth — Send the select Contact’s
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
information to another Bluetooth device.
Select the desired option.
Quick Search Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
For information on enabling Quick Search,
1. In standby mode and with Quick
Search enabled, press the first few
numeric keys that correspond to the
letters of the Contact’s name.
•
•
To say the name again, press Repeat
.
To exit VoiceSignal without dialing, press Settings and press Exit
.
Understanding Your Contacts
38
3. Select Create New
.
Example: To search for “Sally” you would enter 725
.
The Create New screen appears in the display showing the
2. Press the Up navigation key. A list of
Contact names that begin with
letters corresponding to the number
keys you pressed appears in the
display.
following icons:
Mobile
Pager
Home
Fax
Work
4. Select the number type that matches your new entry. The
3. Highlight the searched for Contact.
Add New Entry screen appears in the display.
•
•
To call the Contact, press
To view the Contact, press
.
5. Use the keypad to enter a name to associate with the
.
Contacts entry.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
6. Press SAVE
(
) to save the entry.
Menu Method
Dial Method
1. In standby mode, press Menu
Add New Contact
(
), then select Contacts
1. Using the keypad, enter the number you wish to add to
➔
.
your Contacts.
The Add New Entry screen appears in the display with the
2. Press the Save soft key. The following options appear in
the display:
Name field highlighted.
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Highlight one of the following fields:
39
• Mobile
3. Use the Navigation key to review the information for the
• Home
entry that you wish to change, then press EDIT
(
). The
• Work
Edit Contact screen appears in the display.
• Pager
4. Use the Navigation key to highlight the particular
• Email
information you want to add or change.
• Group
•
•
Press
to backspace and delete numbers or letters.
• Ringtone
Press and hold
field.
to clear all numbers or letters in the highlighted
• Fax
4. Enter a phone number or Email address in the highlighted
•
Press the Options soft key.
field.
The following options pop-up in the display:
–
Set Speed Dial Remove Speed Dial — Assign/remove a speed dial
/
5. Repeat steps 3 and 4 as needed.
6. Press
to save the new entry.
–
Set as default — Set the number the phone will dial when Contacts
dialing or speed dialing.
Editing a Contacts Entry
–
–
Wait — A hard pause (waits for input from you).
Editing Contacts Name and Numbers
Select the desired option.
5. When you’re finished changing the Contacts entry:
2. Use the Navigation key to highlight the entry and press
•
To save your changes, press
.
VIEW
(
). The View Contact screen appears in the
display showing the highlighted entry’s information.
Understanding Your Contacts
40
•
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the Yes soft key to
discard your changes.
3. Press Options. The following pause options appear in the
Add Pauses to Contacts Numbers
display:
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
4. Select the pause option of your choice to add it to the
number sequence.
•
Wait — Stops the calling sequence until the phone receives further
input.
5. When you’re finished entering information, press
to
store the number to Contacts.
•
2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
3. Press
to resume dialing the number.
41
Edit an Existing Email Address
The Edit Contact screen appears in the display.
3. Highlight the Ringtone field, then press the Set soft key.
The Contact Tone menu appears in the display showing the
following options:
2. Highlight the desired Contacts entry, then press the Edit
• My Ringtones
soft key.
• My Sounds
The Edit Contact screen appears in the display.
4. Select the desired option. The My Ringtones or the My
Sounds file list appears in the display.
3. Highlight the Email field.
5. Select the ringtone or sound that you wish to assign to the
Contacts entry.
The Edit Contact screen re-appears in the display with the
5. Press
to save your changes.
name of the selected file in the Ringtone field.
Assigning a Ringtone to a Contacts Entry
6. Press
to save the ringer assignment to the selected
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
2. Highlight the desired Contact, then press the Edit soft key.
Understanding Your Contacts
42
1. Press
to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
in the display.
4. Press
. The new entry is saved to your Contacts list.
2. Press the Save soft key. The Save menu appears in the
display showing the following options:
Add to an Existing Entry
1. At the Save menu, select Update Existing. The Update
Existing screen appears in the display showing your
Contacts list with the Go To field and the first Contacts
entry highlighted.
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
2. Find the Contacts entry to which you want to add the new
Create a New Entry
3. Select the desired Contacts entry. The following number
1. At the Save menu, select Create New
.
type options appear in the display:
The Create New screen appears in the display showing the
Mobile
Pager
Home
Fax
Work
following number type options:
Mobile
Pager
Home
Fax
Work
Number types that are already assigned a number show
the number instead of the number type label.
2. Select the number type that matches your new entry. The
Add New Entry screen appears in the display.
43
4. Select the desired unassigned number type. The Edit
Contact screen appears in the display with the new
number posted in the appropriate number type field.
a name for the entry.
2. After entering the Contacts entry name, do not press
.
Instead, highlight a number field.
5. Press
again to save your changes to the existing
3. Press the Options soft key. The following options appear in
the display:
entry.
Speed Dial
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
• Wait — A hard pause (waits for input from you).
Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
• 2-Sec Pause — A 2-second pause after which dialing resumes.
and hold
, (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
Select Set Speed Dial. The Speed Dial screen appears in the
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
display.
4. Select an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field using the
keypad.
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to Voicemail (001), to
Information (411), to Customer Care (611), and to emergency use
(911).
To assign a Speed Call number to a new Contacts entry number,
do the following:
Understanding Your Contacts
44
5. Press SET ( ). You are prompted to confirm your Speed
Changing a Speed Dial Location
Dial number assignment.
6. Press the Yes soft key to save your Speed Dial assignment
and return to the Add New Entry screen.
2. Highlight the desired entry.
Note: Press the No soft key to discard the assignment and return to the
Speed Dial screen.
3. Press Edit. The Edit Contact screen appears in the display.
4. Highlight the number field marked by the Speed Dial icon
7. Press
to save your changes.
(
).
Assignment to an Existing Entry
5. Press the Options soft key. The following options appear in
the display:
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
2. Highlight the desired entry.
3. Press Edit. The Edit Contact screen appears in the display.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Highlight the number field you wish to assign a Speed Dial
number.
6. Select Remove Speed Dial. “Remove speed dial?” pops up
in the display to confirm your desire to remove the entry.
45
7. Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the display,
and you are returned to the Edit Contact screen.
• No Group
• Business
• Colleague
• Family
• Friends
3. Select the Group to which you want to assign the selected
Contacts Groups
Contact.
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
You are returned to the Add New Entry
and the selected Group name populates the Group field.
4. Press to save your changes.
/Edit Contact screen
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
Using Group Add Option
The Add option lets you add one or more existing Contacts to a
Group.
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1. In standby mode, press Menu
Group
(
), then select Contacts
Group.
➔
.
The Group List screen appears in the display showing
Groups similar to the following:
• No Group
• Business
• Colleague
2. Highlight the Group field, then press the Set soft key.
The Select Group screen appears in the display showing
Groups similar to the following:
Understanding Your Contacts
46
• Family
5. When you have marked the Contacts you want to add to
the group, press Done. “Contact added to group” appears in
the display, followed by the selected Group list including
the added Contacts.
• Friends
2. Highlight a Group, then press the Options soft key. The
following options popup in the display:
• Send Txt Msg — Send a text message to the selected Group.
• Send Pic Msg — Send a picture message to the selected Group.
• Rename — Change the name of the selected Group.
Remove Contacts Entry from a Group
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group (other than No Group) from which you
want to remove a Contact, then press VIEW ).
(
), then select Contacts
➔
• Erase— Delete the selected Group, and send the Contacts back to
No Group.
(
• Add — Add one or more Contacts to the selected Group.
3. Select Add. The Add Contacts screen appears in the display
showing a list of Contacts entries.
A list of the Contacts assigned to the selected Group
appears in the display.
4. Do one of the following:
3. Highlight the Contact you wish to remove.
•
Use the Navigation key to highlight an entry you want to add to the
4. Press the Remove soft key. You are prompted to confirm
group, then press MARK
(
). A check mark appears in the entry’s
the removal of the selected Contact.
check box.
5. To remove the selected Contact from this Group and return
Repeat as needed to check all the desired Contacts.
it to No Group, press the Yes soft key.
•
Press the Mark All soft key.
To keep the selected Contact in this Group, press the No
Note: To unmark a marked Contact, highlight the Contact and press MARK to
clear the check mark.
soft key.
47
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
4. When you have completed entering the new Group name,
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group name other than No Group that you
wish to change, then press Options Rename
(
), then select Contacts
press SAVE
(
). “Group Saved” appears in the display
➔
followed by the Group List screen showing your new
Group.
➔
.
Erase a Group
The Rename Group screen appears in the display.
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group that you wish to delete, press the
Options soft key, then select Erase
(
), then select Contacts
➔
4. When you have completed your changes to the Group
name, press SAVE
Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
(
).
.
“
You are prompted to confirm the Group erasure.
3. To confirm erasure of the Group, press the Yes soft key. To
Add a New Group
retain the Group, press the No soft key.
The New option lets you add Groups.
1. In standby mode, press Menu
Group. The Group List screen appears in the display.
Deleting a Contacts Entry
(
), then select Contacts
➔
2. Press the New soft key. The New Group screen appears in
the display.
Understanding Your Contacts
48
2. Highlight the desired entry, press the Options soft key, then
select Erase. The phone prompts you to confirm the
erasure.
3. To confirm erasure of the selected Contact, press the Yes
soft key. To retain the Contact, press the No soft key.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
ᮣ
In standby mode, press Menu
Memory Info
(
), then select Contacts
➔
.
The Memory Info Contacts screen appears in the display
showing the Total amount of memory in your phone, the
amount of memory Used to store Contacts entries, and the
remaining (Free) for Contacts entries.
49
Section 7: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
2. Enter the phone number or Email address of the recipient,
or press the Add soft key and select a Contact entry, a
Contacts Group, or the originator or recipient of a recent
Types of Messages
call, then press
. The Text: field appears in the display.
Your phone is able to send and receive Text messages to
compatible phones and devices. Text messages can be up to 160
characters in length.
3. Enter the text content of your message using the keypad.
Note: Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
4. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Create and Send Text Messages
1. In standby mode, press the Msgs soft key, then select Send
• Edit Send To — Edit the recipient’s number or email address.
• Add Quick Text — Insert pre-composed text in your message.
• Save As Draft — Save the message to your Draft folder.
Message
➔
Text Message. The Create Txt Msg screen
appears in the display showing the To: list.
• Priority Level — Choose Urgent or Normal
.
Tip: To launch the Create Txt Msg screen using a voice command — In
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
• Deferred Deliv. — Set the date and time when this message will
be delivered.
Messaging
50
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
when your message is received.
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
View Later — Saves the message to your Inbox, where you can view
it later, and returns your phone to call mode.
5. Once you’re finished entering your message, press SEND
(
).
Select the desired option.
View a Text Message Now
Receive Text Messages
1. After you select the View Now option, the new text
message appears in the display.
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display along
with the closed envelope icon (
). The date and time of the
2. While viewing your message press the Options soft key.
The following options appear in the display:
message also appear in the display along with the following
options:
• Forward — Send a copy of this message to another recipient.
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
View Later — Saves the message to your Inbox, where you can view
it later, then returns your phone to standby mode.
• Save Quick Text — Save the text in this message as a new Quick
Text.
Select your choice.
• Lock Unlock — Block/permit erasure of the highlighted
/
Receive Messages While in a Call
message.
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon (
The date and time of the message also appear in the display
along with the following options:
• Add To Contacts — Save the sender’s number to your Contacts.
).
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
• Extract — Lets you call the originator of the highlighted message.
51
3. Select an option to perform its function.
The following icons indicate which responses are incoming and
outgoing:
Incoming Message
View a Text Message Later
Outgoing Message
1. In standby mode, press the Msgs soft key, then select
Inbox. The Inbox screen appears in the display.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
2. Select the new message. The new text message appears
in the display.
Chat View
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send to field of the
Picture message composer.
Chat View mode is the default format for
viewing text messages. In Chat View mode,
you can view a series of text messages
exchanged between your phone and
another phone as if the messages were a
chat session, instead of viewing only the
incoming messages individually.
1. In standby mode, press and hold the Camera key (
).
The camera viewfinder screen appears in the display.
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press TAKE
(
) to
take a picture.
Note: To disable/enable Chat View mode, change the Message View setting.
Note: For more information about using the camera feature in your phone,
Tip: To simplify the exchange of messages with Message View setting to
Chat, you might want to change the Auto Save setting to On
.
Messaging
52
3. Press SEND
(
) to save the picture and begin the picture
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
message delivery process. The Create Pic Msg screen then
–
Record New — Record a new memo to insert into the message.
appears in the display with the Send To: list highlighted.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
4. Enter the phone number or Email address of the recipient
of the Picture message, then press
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups Recent Calls, and OnlineAlbum. These options allow you to find
and add recipients to the Send To: list.
,
,
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press
5. The Subject: field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
.
9. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
6. Press the Navigation key Down until the Text: field is
highlighted, then enter the message text using the keypad.
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Quick Text — Add precomposed text to your message.
Save As Draft — Save the message to your Draft folder.
7. Your new picture appears in the PIC: field.
Priority Level — Choose Urgent Normal, or Low.
,
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
8. If you wish to insert a sound into your Picture message,
highlight the Sound: field and do the following; otherwise,
proceed to step 10.
Time
.
• Deferred Deliv. — Set the date and time when this message will
be delivered.
53
•
Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
Tip: To launch the Create Pic Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
•
•
•
Remove Pic — Remove the picture from your message.
Remove Sound — Remove the sound file from your message.
Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
2. Enter the phone number or Email address of the recipient
using the keypad, then press
.
Select the desired option.
10. Press to send the message. “Pic Msg Sending
”
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups Recent Calls, and OnlineAlbum. These options allow you to find
and add recipients to the Send To: list.
,
,
appears in the display and a progress bar indicates the
send status.
3. The Subject: field appears in the display. Enter a subject for
the Picture message using the keypad. (For more
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
4. Press the Navigation key Down until the Text: field is
highlighted, then enter the message text using the keypad.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
1. In standby mode, press the Msgs soft key, then select Send
5. Press the Down navigation key until the PIC: field is
highlighted, then press the Pictures soft key. A photo
gallery of thumbnail images appears in the display.
Message
➔
Picture Message.
The Create Pic Msg screen then appears in the display
showing the To: list.
Messaging
54
–
Audio files list — Select from the list of previously recorded voice
6. Highlight a picture to be added to your message, then do
memos and preloaded audio files on your phone.
the following:
Select an option, a sound file, and insert the sound into your message.
To exit the pop-up menu without inserting a sound, press
•
If you want, press the View soft key to expand the highlighted
picture to full-screen size.
.
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•
If you want to include a new picture, press the Camera soft key.
Note: For more information about using the camera feature in your phone,
• Preview — View the picture as the recipient will see it.
• Add Quick Text — Add precomposed text to your message.
• Save As Draft — Save the message to your Draft folder.
•
Press
to add the highlighted picture to your message.
You are returned to the Create Pic Msg screen with the
selected picture in the Pic: field.
•
Priority Level — Choose Urgent, Normal, or Low.
7. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 8.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
• Deferred Deliv. — Set the date and time when this message will
be delivered.
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
–
Record New — Record a new memo to insert into the message.
• Remove Pic — Remove the picture from your message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
Select an option to invoke its function.
55
9. Press
to send the message. “Pic Msg Sending
”
3. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
appears in the display and a progress bar indicates the
send status.
Receive Picture Messages
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and New Message appears in the
Note: For more information on viewing and managing received picture
display along with the closed envelope icon (
).
View a Picture Message Now
1. After you select the View Now option, “Connecting
The date and time of the message also appear in the display
along with the following options:
”
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
•
View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
Select the desired option.
View a Picture Message Later
1. In standby mode, Msgs soft key, then select Inbox. The
Inbox appears in the display.
3. While viewing your message press the Options soft key.
2. If the new picture message is not highlighted, select the
new message. “Connecting” appears in the display
followed by “Retrieving” and a progress bar indicating that
the message is downloading to your phone.
The following options appear in the display:
• Play Again — Play the sound file included in the picture message
again.
• Forward — Send a copy of this message to another recipient.
Messaging
56
• Erase — Remove this message from the folder.
1. In standby mode, press the Msgs soft key, then select
• Lock Unlock — Block/permit erasure of the highlighted
/
Inbox. A list of incoming messages appears in the display.
message.
Tip: While in a call, press Options, then select Message to open the Messages
• Save Pic — Save the picture included in this message to the My
Images folder.
menu.
• Save Sound — Save the sound file included in this message to the
2. Select the message that you wish to view. The contents of
My Sounds folder.
the highlighted message appear in the display.
• Save Quick Text — Save the text in this message as a new Quick
Text.
3. While viewing your message press the Options soft key.
The following options appear in the display:
• Chat view:
• Add To Contacts — Save the sender’s number to your Contacts.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
–
View Last Message — Displays the most recent message exchanged
• Extract — Calls the sender of the received message.
with this sender/addressee in Normal mode.
4. Select an option to invoke its function.
–
Add To Contacts — Save the sender’s number to your Contacts.
• Normal view:
Note: For more information on received picture message options, see
–
–
Forward — Send a copy of this message to another recipient.
Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the original
message.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
–
Save Quick Text — Save the text in this message as a new Quick
Text.
Inbox
–
–
Lock
/
Unlock — Block/permit erasure of the highlighted message.
Add To Contacts — Save the sender’s number to your Contacts.
Received messages of all types (except Voicemail) are stored in
the Inbox.
57
–
–
Message Info — Shows message delivery status, addressee, size,
and so on.
• Message Info — Shows message delivery status, addressee, size,
and so on.
Extract — Calls the sender of the received message.
5. Select an option to perform its function.
4. Select an option to invoke its function.
Outbox
Managing Inbox Messages
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or Email was successfully received by enabling
the Delivery Ack feature.
1. In standby mode, press the Msgs soft key, then select
Inbox. A list of incoming messages appears in the display.
2. Highlight a message in the list.
Review Messages in the Outbox
3. Press Erase to remove the highlighted message from the
1. In standby mode, press the Msgs soft key, then select
Outbox. Your list of sent messages appear in the display.
Inbox.
4. To access other options, press the Options soft key. The
2. Highlight a message that you wish to review, then press
following options appear in the display:
OPEN
(
).
• Reply — Compose and send a reply message to the originator of
the received message.
3. While viewing your message, press the Options soft key.
The following options appear in the display:
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Forward — Send the highlighted message to another recipient.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
• Forward — Send a copy of this message to another recipient.
• Lock Unlock — Block/permit erasure of the highlighted
/
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Erase Inbox — Delete all unlocked messages from the Inbox.
• Add To Contacts — Save the recipient’s number to your Contacts.
Messaging
58
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
• Extract — Calls recipient of this message.
4. Select an option to perform its function.
4. Select an option to perform its function.
Draft Box
Messages and Lock Mode
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Create a Draft Message
Managing Outbox Messages
1. In standby mode, press the Msgs soft key, then select Send
1. In standby mode, press the Msgs soft key, then select
Outbox. Your list of sent messages appear in the display.
Message
➔
Text Message. The Create Text Msg screen
screen appears in the display showing the To: list.
2. Highlight a message, then press Erase to remove the
2. Enter the phone Number or Email address of a recipient,
highlighted message from the Outbox.
then press
.
3. Press the Options soft key. The following options appear in
the display:
3. Compose your message using the keypad, then press the
Options soft key and select Save As Draft. A confirmation
message appears in the display and your message is
saved to the Drafts box.
• Forward — Send the highlighted message to another recipient.
• Resend — Re-send the highlighted message to the original
recipient.
View and Edit Draft Text Messages
• Lock Unlock — Block/permit erasure of the highlighted
/
1. In standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve saved
appears in the display.
message.
• Add To Contacts — Save the recipient’s number to your Contacts.
• Erase Outbox — Delete all unlocked messages from the Outbox.
59
2. Highlight a text message that you wish to view or edit, then
press EDIT ). The message text edit screen appears in
the display.
• Add To Contacts — Save the recipient’s number or Email address
to your Contacts.
(
5. Select an option to perform its function.
6. When you have completed composing your message,
3. Enter or change the recipient’s number and/or Email
address and the message text using the keypad. (For more
press SEND
(
).
Managing Draft Messages
1. In standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve composed
appears in the display.
4. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
2. Highlight a message.
• Edit Send To — Change, add, or remove recipients from this
message.
3. To remove the highlighted message from the Drafts box,
press the Erase soft key. You are prompted to confirm
erasure of the highlighted draft message.
• Add Quick Text — Insert pre-composed text into your message
text.
• Save As Draft — Save the message to your Drafts box.
•
•
To erase this draft message, press the Yes soft key.
• Priority Level — Choose Urgent or Normal
.
To keep this draft message in your Drafts box, press the No soft
key.
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
4. For other options, press the Options soft key. The following
• Deferred Delivery — Set the date and time when this message
options appear in the display:
will be delivered.
• Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or Email address is included with the
draft message.
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
Messaging
60
Listen to Voicemail Later
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
If you choose to review your voicemail messages at a later time:
1. In standby mode, press the Msgs soft key, then select
Voicemail. The Voicemail screen appears in the display,
showing the number of new voicemail messages received
and the date and time the latest message was received.
• Add To Contacts — Save the recipient’s number and/or Email
address to your Contacts.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
• Erase Drafts — Delete all unlocked draft messages.
5. Select an option to perform its function.
2. Highlight a voice message.
Voicemail
3. Press
or
to call your voice mailbox and listen to
New messages in your voice mailbox are indicated by the
voicemail icon ( ) and are logged in the Voicemail box of the
Messages menu. Open the Voicemail box to view the Callback #
(if available), Urgency, and other details of the Voicemail
message.
the message.
Note: You can also press and hold
to dial your voice mailbox.
Erase Messages
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
Note: This function erases all messages in a selected box. To delete a single
message, open the box from the Messages menu, highlight a message,
open the message if you want, then press Erase to delete it.
•
Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
•
Listen Later — Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
1. In standby mode, press the Msgs soft key, then select
Erase Messages
.
Select an option to perform its function.
The following options appear in the display:
61
• Inbox — Deletes all unlocked messages stored in the Inbox.
• Outbox — Deletes all unlocked messages stored in the Outbox.
• Drafts — Deletes all unlocked messages stored in the Drafts box.
• Quick Text — Edit your pre-composed messages, which can then
be inserted into new messages.
• Voicemail # — Edit or view your Voicemail number.
• Entry Mode — Choose the default method for entering text into
• AllMessages — Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
messages (T9 Word Abc, ABC, 123).
,
• Callback # — Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
2. Select the messages that you wish to delete. You’re
prompted to confirm the erasure of all messages in the
selected box or in all boxes.
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
3. To delete the messages, press the Yes soft key. To cancel
• Reminder — Select whether and how often you will hear and/or
deleting the messages, press the No soft key.
feel a reminder that you have received a message (Once Every 2
,
Minutes Every 15 Minutes, Off).
,
Message Settings
Use the Msg Settings sub-menus to define general settings and
2. Select the desired option to enter the highlighted option’s
sub-menu.
text message settings.
Editing and Entering Quick Text
General Message Settings
1. In standby mode, press the Msgs soft key, then press Msg
1. In standby mode, press the Msgs soft key, then select Msg
Settings
➔
General. The following options appear in the
Settings
appears in the display.
2. To create a new Quick Text:
Press New
➔
General
➔
Quick Text. The Quick Text sub-menu
display:
• Auto Save — Choose whether your messages are saved
automatically when you exit them (On Off Prompt).
,
,
•
.
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
Tip: You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the Save Quick Text option in the Options
Messaging
62
• Auto View
—
On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the
•
•
Enter/change the text content of your Quick Text using the keypad.
bottom of outgoing message text.
• Auto Scroll
—
On/Off — With Auto Scroll On, the full content of a
Once you’re finished entering your Quick Text, press OK. The Quick
Text menu appears in the display with your new Quick Text
highlighted.
text message automatically rolls upward on the display, one screen-
full at a time.
• Message View
—
Chat/Normal — With Message View set to
3. To change a Quick Text:
Chat, series of text messages exchanged with one other phone
appear in the display as a chat session. (For more information, refer
•
Highlight a Quick Text you want to change, then press EDIT. (You
cannot change the pre-defined Quick Text included with your
phone.)
2. Select the desired option to enter the highlighted option’s
sub-menu.
Note: You cannot change or erase pre-loaded Quick Texts.
Picture Message Settings
1. In standby mode, press the Msgs soft key, then select Msg
•
Enter/change the text content of your Quick Text using the keypad.
Settings
➔
Picture Message. The following options appear
4. To erase a Quick Text:
in the display.
•
Highlight a Quick Text you want to erase, then press Erase. You are
prompted to confirm erasure of the highlighted Quick Text.
• Auto Receive — On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
received. With Auto Receive Off, you are prompted to download
Picture messages.
•
To erase the highlighted Quick Text, press Yes. To keep it, press No
.
Text Message Settings
1. In standby mode, press the Msgs soft key, then select Msg
Settings Text Message. The following options appear in
the display:
• Signature — Create a signature, which can be included at the
bottom of outgoing Picture message text.
➔
63
2. Select the desired setting to enter the highlighted option’s
sub-menu.
Messaging
64
Section 8: easyedgeSM
SM
SM
With easyedge , you can download multimedia, applications,
The easyedge shop tab lets you locate, purchase (when
games, and check news and sports.
required), and download an application, ringtone, or other
multimedia files.
Tip: You can access easyedgeSM Games home page directly from standby
mode by tapping the Menu soft key, then selecting Games
.
Launching an Application
1. In standby mode, press Menu
Note: easyedgeSM from U.S. Cellular is only available on approved phones
easyedge or call U.S. Cellular customer service (by dialing 611 on your
(
), then select easyedge.
SM
The easyedge screen
phone) and ask about easyedgeSM
.
appears in the display with the
SM
SM
Accessing easyedge
easyedge shop tab
SM
With easyedge , you can download
full featured applications over the air
including games, personalized ring
tones, pictures, and more.
showing.
2. Press the Right Navigation
key.
The my stuff tab shows, listing any applications (apps) you
ᮣ
In standby mode, press Menu
), then select easyedge
have downloaded.
(
.
SM
The easyedge screen
3. Highlight the application you wish to run, then press
.
appears in the display with the
SM
easyedge shop tab showing.
65
Finding and Downloading Applications
1. In standby mode, tap the Menu soft key, then select
SM
easyedge. The easyedge screen appears in the display
SM
with the easyedge shop tab showing.
2. Follow the prompts to locate, purchase (when required),
and download an application, ringtone, or other
multimedia files.
easyedgeSM
66
Section 9: Changing Your Display Settings
This section shows you how to change your phone’s menu
appearance, display brightness and contrast, and display content
to better meet your needs.
Wallpaper
Wallpaper lets you choose the images that appear in the
background of your phone’s front and main displays while your
phone is closed or in standby mode.
Accessing the Display Menu
To access the Display menu, do the following:
1. In standby mode, press Menu ( ), then select Display.
The Display menu appears in the display.
1. At the Display menu, select Wallpaper.
The following options appear in the display:
• Main Display
• Front Display
Tip: To launch the Display menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a command.”
Say “Go to Display” into the microphone.
Note: When you select Front Display, your Wallpaper selection automatically
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
2. Select the Display whose Wallpaper you wish to change.
Menu Style
The following options appear in the display:
1. At the Display menu, select Menu Style. The following
•
My Images — Lets you select a photo you’ve taken or an image
that you’ve downloaded from the Internet as a wallpaper image.
Main Menu styles appear in the display:
•
Preset Images — Lets you select an image that came preloaded
•
•
Icon — Main Menu appears as 4-by-3 array of icons.
with your phone as a wallpaper image.
List — Main Menu appears as a scrollable list (text).
3. Select the image type that you wish to use. An array of
2. Select the desired Main Menu style. You’re returned to the
images appears in the display.
Display menu.
67
4. Select the image that you wish to use to save your
•
•
•
Digital
Analog
Off
selection.
Clock Format
Clock Format lets you choose the format your phone will use to
present the current time in your phone’s front and main displays
while your phone is closed or in standby mode.
1. At the Display menu, select Clock Format.
The following options appear in the display:
• Main Clock
• Front Clock
2. Select the Clock you wish to reformat. The following
options appear in the display:
• Samsung — Main Clock only
Changing Your Display Settings
68
•
Plush
Note: The Clock Format setting for the Front Clock automatically changes to
3. Select the desired clock format. A “Clock Set” message
appears in the display, and you are returned to the Display
menu.
Theme
2. Use the Navigation key to show the available Themes
(which appear in the preview screen), then press
save the displayed Theme setting.
Lets you select the color theme used to display menu screens
and popup menus and messages. You can choose from a variety
of themes.
to
1. At the Display menu, select Theme. The following options
Dialing Font Size
Lets you select the size of your dialing font.
are available:
•
Samsung
1. At the Display menu, select Dialing Font Size.
The following options appear in the display:
•
•
Normal
Large
2. Select the desired setting.
69
•
•
Keypad — Sets the amount of time the keypad backlight remains
on after a period of inactivity. Optional settings are: 10 seconds
15 seconds 30 seconds Always On, and Always Off
Banner
,
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
,
,
.
Brightness — Sets the brightness of the backlight to one of five
possible settings.
1. At the Display menu, select Banner.
2. Select the desired sub menu, then select the desired
Tip: Press and hold
to erase an existing banner, if necessary.
setting.
2. Enter a word or short phrase to appear in your phone’s
display while in standby mode (Up to 13 characters). (For
Front Contrast
Front Contrast lets you choose the display contrast to suit
yourself.
3. Press
to save the new banner.
1. At the Display Settings menu, select Front Contrast
.
Backlight
2. Use the Left/Right navigation keys to sample any of the 21
display contrast settings from -10 to +10. The screen
shows the effects of each new setting.
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
•
To save the new setting and return to the Display Settings menu,
press
.
Note: Prolonged backlight use drains your battery faster.
•
To return to the Display menu and discard the new setting, press
.
1. At the Display menu, select Backlight. The following sub
menus appear in the display:
•
Main Display — Sets the time the internal display backlight
remains on after a period of inactivity. Optional settings are: 10
seconds
,
15 seconds, 30 seconds, Always On, and Always
Off.
Changing Your Display Settings
70
Section 10: Changing Your Sound Settings
This section shows you how to customize your phone’s audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
•
•
Messages — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming messages.
Alarms — Lets you set your phone to be silent, play a sound, and/
or vibrate in response to a preset alarm time being reached.
Accessing the Sounds Menu
2. Select the desired option.
To access the Sounds menu, do the following:
1. In standby mode, press Menu ( ), then select Sounds.
The Sounds menu appears in the display.
3. Use the Navigation key or the Volume key (on the left side
of your phone) to change the volume level (Ringer Off,
Low, Low/Medium, Medium, Medium/High, High) or
vibrate mode (Vibrate, Vibrate/High) for the selected
option.
Tip: To launch the Sounds menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to Sounds” into the microphone.
2. Select the desired sub-menu. The following sections
Tip: To preview the selected ringtone or alert tone while adjusting the volume
setting, press the Play soft key.
describe the Sounds sub-menus in greater detail.
Volume
4. Press
to save the volume level/vibrate mode.
Use the Volume sub-menu to set the default volume for incoming
calls and alarms.
Ringer Type
You can assign ring tones for calls, alarms, and other alerts in the
Ringer Type sub menu.
1. From the Sounds menu, select Volume. The following
options appear in the display:
1. From the Sounds menu, select Ringer Type. The following
•
Voice Calls — Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
Ringer Types appear in the display:
•
Voice Calls
71
•
Messages
Alerts
–
–
–
Text Message
Picture Message
Voicemail
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
2. Select the desired Ringer Type. The following options
1. From the Sounds menu, select Alerts. The following
appear in the display:
options appear in the display:
•
•
My Ringtones
My Sounds
•
Minute Beep — Sound an alert ten seconds before each elapsed
minute of a call.
•
Roaming — Sound an alert when you leave your home service
Note: Your phone includes preloaded ringtones and sounds. You can
area while on a call.
download additional ringtones and sounds using easyedgeSM
.
•
•
Call Connect — Sound an alert when you connect a call.
You can record your own sounds by accessing My Sounds through the
Power On/Off — Play melodies when you turn your phone on or
off.
Multimedia menu. Select Menu
➔
Multimedia
➔
My Sounds
➔
2. Select the desired option. The following settings appear in
the display:
3. Select the desired option. A list of ringtones or sounds
•
•
On
Off
appears in the display.
4. Use the Navigation key to scroll through the ringtones and
3. Select the desired setting.
sounds for the preferred ringer.
Key Tone
•
•
To play each ringtone or sound, press the Play soft key.
Key Tone allows you to adjust the volume level and length of the
tone that the keypad generates each time you press a key.
To save the desired ringtone or sound selection, press
.
1. From the Sounds menu, select Key Tone.
Changing Your Sound Settings
72
The following options appear in the display:
•
•
Tone Level
Tone Length
2. Select the desired option.
•
If you select Tone Level:
–
–
To set the keypad Tone Level, use the Volume key or Navigation key.
To save your Tone Level setting, press . You are returned to the Key
Tone sub-menu.
•
If you select Tone Length
:
–
Select Short or Long. You are returned to the Key Tone sub menu.
73
Section 11: Camera
Use your R311 phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
1. In standby mode, press and hold the Camera key (
)
on the right side of the phone. The message “Please,
•
•
•
Take pictures with your phone’s built-in digital camera.
Send your pictures to others in Picture messages.
Set the several options associated with the camera that help you take
crisp, clear pictures.
Wait...” appears in the display followed by a camera view
Taking Pictures
Note: You can also activate the camera by pressing Menu ( ), then
Taking pictures with the built-in
camera is as simple as launching
the camera, choosing a subject,
pointing the lens (located on the
front of your phone’s flip, near the
hinge), and pressing a button.
selecting Multimedia ➔ Camera.
Camera
Lens
2. Using the display as a viewfinder,
point the camera lens (on the front of
the flip, near the hinge) at your
subject.
3. When the image that you wish to
capture appears in the display, press
TAKE
(
).
4. To save the picture to memory, press the Save soft key.
Camera
74
To erase the photo, press the Cancel soft key.
2. Press the Options soft key. The
options menu bar appears at the top
of the camera screen.
Tip: You can change a number of the camera’s settings to suit particular
information.
3. Highlight the Shot Type icon (
,
Taking Multi Shot Pictures
,
, or ). The following
Shot Type options appear in the
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
display:
•
•
•
Single Shot
Series Shot
—
—
— Lets you take 1 photo at a time.
— Lets you take a series of 3 or 5 photos.
— Lets you take a mosaic of 4 or 9
Divided Shot
photos.
—
•
Frame Shot
—
— Lets you select a colorful frame to
1. In standby mode, press and hold the Camera key (
)
include around your photos.
on the right side of the phone. The message “Please,
4. Select Series Shot or Divided Shot
.
Wait...” appears in the display followed by a camera view
finder screen. Your phone is now in camera mode. (For
•
When you select Series Shot, the following options appear in the
display:
–
–
Off
3 Auto — Lets you take 3 photos automatically with one press of TAKE
(
).
3 Manual — Lets you take 3 photos in quick succession by pressing
TAKE ) for each photo.
5 Auto — Lets you take 5 photos automatically with one press of TAKE
).
Note: You can also activate the camera by pressing Menu ( ), then
–
–
selecting Multimedia ➔ Camera.
(
(
75
–
5 Manual — Lets you take 5 photos in quick succession by pressing
TAKE ) for each photo.
7. When the image that you wish to capture appears in the
display, press TAKE ). The camera takes one picture
(
(
•
When you select Divided Shot, the following options appear in the
display:
(Manual) or multiple pictures in quick succession (Auto),
then the Series Shot Select to Save screen or the Divided
Shot mosaic photo screen appears in the display.
• Series Shot:
–
–
Off
4 Auto — Lets you take 4 shots automatically that are combined into a
single, mosaic photo, all with one press of TAKE
4 Manual — Lets you take 4 shots in quick succession by pressing
TAKE ) for each shot, with all 4 shots being combined into a single,
(
).
–
–
To save the pictures to memory, press the
(
Done soft key.
mosaic photo.
–
To discard the pictures, press
.
–
–
9 Auto — Lets you take 9 shots automatically that are combined into a
single, mosaic photo, all with one press of TAKE
9 Manual — Lets you take 9 shots in quick succession by pressing
TAKE ) for each shot, with all 9 shots being combined into a single,
mosaic photo.
(
).
(
•
Divided Shot:
5. Select the desired setting.
–
–
–
To save the picture to memory, press the
Save soft key.
To send the picture in a picture message,
A Series Shot progress bar (
) or
a Divided Shot icon (
) (which acts as a progress bar
press Send
(
).
while pictures are being taken) appears in the display.
To discard the picture, press the Cancel
soft key.
6. Using the display as a viewfinder, point the camera lens at
your subject.
Camera
76
Series Shot in use — Takes a series
Camera Screen Layout
(
) of photos automatically or
When you activate your phone’s camera,
the top two lines of the display are reserved
for camera icons (when active). The center
of the display shows a viewfinder image of
the subject at which the camera is pointed.
manually when you press TAKE
(
). The number of
photos taken depends upon the Series Shot setting.
Divided Shot in use — Takes multiple shots
automatically (
) or manually (
) when you press
TAKE ). The number of shots taken depends upon the
(
Camera Screen Soft Keys
Divided Shot setting. All shots are combined into a single,
mosaic photo.
The soft key labels on the bottom line of the
display change to the following:
Frame Shot in use — Takes one photo each time you
•
My Images — Pressing the Left soft key opens the My Images
multimedia folder so you can view or manage your stored pictures.
press TAKE
(
). Each photo is surrounded by a selected,
colorful frame.
Camera Resolution — Indicates camera’s current
resolution setting. (You can change the camera resolution
information.)
•
•
TAKE — Pressing
takes a picture of the subject currently
appearing in the camera view finder screen.
Options — Pressing the Right soft key opens a menu bar of camera
options and settings.
Night Shot — Lets you take photos in low light.
Camera Screen Icons
Camera — Indicates the camera is active.
Self Timer in use — Delays the camera shutter for 2,
5, or 10 seconds after you press
.
Single Shot in use — Takes one photo each time you
press TAKE ).
Quality — Indicates camera’s picture quality setting. (You
can change the picture quality setting. For more
(
77
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
•
•
Send the picture to someone else by pressing Send
(
).
Discard the picture by pressing the Cancel soft key.
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
If Auto Save is set to On, these options are not available. After
pressing TAKE ), the picture(s) is (are) automatically saved,
and you are returned to the camera screen.
(
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Camera Options
The Camera Options let you temporarily adjust default camera
settings to suit available lighting, the subject of the photo, or the
purpose of the photo, for the current camera session. When you
exit the camera, your Camera Options values revert to their
default values.
Zoom — Enlarges the image from X0 to X7 before you
take a picture. (Depending on the camera resolution
Brightness — Brightens or darkens the image from -4
to +4 before you take a picture. (For more information,
To access Camera Options, do the following:
1. In camera mode, press the Options soft key. The Camera
Options menu appears in the display, containing the
following sub-menus:
Picture Options
After you take a picture, the following options are available (if
Auto Save is set to Off):
Shot Type (also
Resolution
,
, or
)
•
Save the picture by pressing the Save soft key.
Pictures are stored in the My Images folder, which is part of the
phone’s memory and/or card memory devoted to storing, browsing,
information.)
Night Shot (also
)
Camera
78
•
Frame Shot — Lets you select a colorful frame to include around
your photos (use the Left and Right navigation keys to preview
available frames).
Self Timer (also
Quality (also
,
, or
)
, or
)
Note: The None frame is a blank frame.
White Balance (also
Color Effect
,
,
, or
)
2. Select the desired Shot Type.
Resolution
Settings
Resolution lets you change the clarity (in pixels) and size (in
bytes) of your pictures.
2. Select a sub-menu, then select a preferred value.
1. In camera mode, press the Options soft key, then highlight
the Resolution setting. The following values appear in the
camera screen:
The following sub-sections describe camera options and
available values.
Shot Type
•
•
•
640 X 480 (pixels)
320 X 240 (pixels)
176 X 144 (pixels)
Shot Type lets you take multiple photos or shots in succession at
the touch of a key and/or add colorful frames to your photos.
1. In camera mode, press the Options soft key, then highlight
2. Select the desired Resolution value.
the Shot Type icon (
/
/
/
). The
following values appear in the camera screen:
Note: The Resolution setting affects zoom capabilities. When Resolution is
set to 640 X 480, zoom is not available. When Resolution is set to any
value lower than 640 X 480, zoom settings 1 – 7 are available.
•
•
Single Shot — Lets you take 1 photo at a time.
Series Shot — Lets you take a series of 3 or 5 photos (3 Auto
3 Manual 5 Auto 5 Manual).
Divided Shot — Lets you take a mosaic photo of 4 or 9 shots
4 Auto 4 Manual 9 Auto 9 Manual).
/
/
/
•
(
/
/
/
79
Night Shot
The next time you press
, the countdown Self Timer
indicates the time remaining before the camera takes the
picture. The phone reads the countdown timer value to you
beginning with two or three and continuing to zero, when
the picture is taken.
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press the Options soft key, then highlight
or
. The following options appear in the display:
• Off
• On
Tip: To stop the countdown timer without resetting it, press
.
2. Select the Night Shot setting of your choice.
Quality
Self Timer
You can affect how much your photo is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
3. In camera mode, press the Options soft key, then highlight
1. In camera mode, press the Options soft key, then highlight
the current Quality indicator (
F,
N,
E). The following values
/
/
/
.
appear in the camera screen: Fine, Normal, or Economy.
4. Select the desired Quality value.
White Balance
The following values appear in the camera screen:
•
•
•
•
Off
2 Sec.
5 Sec.
10 Sec.
White Balance allows you to adjust picture quality according to
available light.
2. Select a Self Timer value.
5. In camera mode, press the Options soft key, then highlight
/
/
/
/
.
Note: If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (such as,
) appears in the camera screen in the display.
Camera
80
The following values appear in the camera screen:
7. In camera mode, press the Options soft key, then highlight
. The following values appear in the display:
•
Auto — The camera automatically adjusts picture quality to
available light.
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
Tungsten — Use this setting when taking pictures under
incandescent lights.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
•
•
•
•
•
Normal — Subjects and pictures appear with a normal hue.
Black&White — Subjects and pictures appear in black and white.
Sepia — Subjects and pictures appear in a brownish-gray hue.
Negative — Subjects and pictures appear in inverted colors.
Green — Subjects and pictures appear in a greenish hue.
•
•
•
•
Note: Choose Normal to disable Color Effects.
8. Select the Color Effects value of your choice. The camera
viewfinder screen appears in the display with your
selected Color Effects value applied.
Each option, as you highlight it, shows the effects it has on
a picture.
6. Select the desired White Balance value. The camera
viewfinder screen appears in the display with your
selected White Balance value applied.
When you take your next picture, the camera applies your
selected Color Effects value to your picture.
The next time you press
, the camera applies your
Settings
selected White Balance value to your picture.
When you change Camera Settings values, your changes are
saved for future camera sessions, unlike changes to Camera
Options. To restore Camera Settings to their default values, select
Color Effect
Change the look of your pictures with Color Effect. Choose from
eight available settings such as Gray, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
81
Auto Save
1. In camera mode, press the Options soft key, highlight
, then select View Move. The following shutter sounds
appear in the display:
1. In camera mode, press the Options soft key, highlight
, then select Auto Save. The following values appear
in the display:
•
•
Landscape — Your pictures are wider than they are tall.
Portrait — Your pictures are taller than they are wide.
•
•
Off
On
Shutter Sound
2. Select the automatic save value of your choice. You’re
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
returned to the camera viewfinder screen.
Icon Display
1. In camera mode, press the Options soft key, highlight
, then select Shutter Sound. The following shutter
sounds appear in the display:
1. In camera mode, press the Options soft key, highlight
, then select Icon Display. The following values
appear in the display:
•
•
•
•
Off
Shutter
OK
•
•
•
Guideline — Shows a cross hatch pattern in the view finder
screen.
No Icons — Shows a nearly full-display subject image and without
icons.
DingDong
2. Select the shutter sound value of your choice. You’re
returned to the camera viewfinder screen. The next time
2. Select the viewfinder screen setting of your choice. You’re
you press
, you’ll hear your selected shutter sound.
returned to the camera viewfinder screen.
View Mode
Choose the orientation for your pictures.
Camera
82
Reset Settings
The next time you press
, the camera takes a lighter or
darker picture according to your selected Brightness
setting.
3. In camera mode, press the Options soft key, highlight
, then select Reset Settings. You are prompted to
confirm reset of all camera settings.
My Images
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
•
•
Select the Yes option to reset the camera settings to default values.
Select the No option to keep the current camera settings.
Zoom
Zoom lets you temporarily enlarge the pictures you take.
1. In camera mode, press the My Images soft key. Any
Increasing the Zoom (1 – 7) enlarges your pictures (0 is normal).
pictures that you’ve saved appear in the display.
ᮣ
In camera mode, press the Navigation key Up or Down to
adjust the Zoom (the screen image enlarges to show the
affects of your changes).
Tip: You can also access the My Images folder by pressing Menu
(
) and
➔
The next time you press
, the camera takes an
2. Use the Navigation key to browse pictures in the gallery.
enlarged picture according to your selected Zoom setting.
3. Press the Options soft key while viewing pictures in the
Brightness
Gallery. The following options appear in the display:
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
•
Send — Send the currently displayed or highlighted picture as a
Picture message.
• Online Album — Send a copy of the highlighted picture to your
Album on your Wireless Carrier’s server (using a Picture message).
ᮣ
In camera mode, press the Navigation key Left or Right to
adjust the Brightness (the screen image lightens or
darkens to show the affects of your changes).
•
Set As — Assign the currently displayed or highlighted picture to
be standby screen Main Wallpaper, as a Picture ID for someone in
your Contacts list, or as Front Wallpaper.
83
•
•
Rename — Rename the currently displayed or highlighted picture.
Lock Unlock — Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so that it
can be deleted.
2. Press Send ( ). The Create Pic Msg screen appears in
/
the display.
3. Enter or Add the recipient’s phone number or Email
•
•
Erase Files — Erase selected unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can erase
them.
Picture Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
address using the keypad.
4. Press OK
(
). The address(es) are saved and the Subject
field appears in the Create Pic Msg screen. Use the
Navigation key to move to the other message fields. (For
4. Select the desired option to perform the function for the
option or enter its sub-menu.
5. When you are finished composing your message, press
SEND ( ) to send the Picture message to the intended
recipients.
Switch From Expanded to Thumbnail Mode
1. Highlight a picture that you wish to view full size, then
press VIEW
2. To return to the thumbnail view of your photos, press VIEW
).
(
).
(
Point, Click, and Send Pictures
Take a picture and send it to anyone with a compatible device in
a few easy steps.
1. In camera mode, take a desired picture by pressing TAKE
(
).
Camera
84
Section 12: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (Wallpaper) and as picture
IDs for your contacts.
Accessing Multimedia
1. In standby mode, press Menu ( ), then select
Multimedia. The following sub-menus appear in the
display:
1. At the Multimedia menu, select My
Images. A matrix of thumbnail
images of your pictures appears in
the display.
•
•
•
•
My Images — Lets you choose the pictures that appear in your
phone’s display or in picture messages.
Tip: You can also access My Images from:
My Ringtones — Lets you assign ringtones for Ringtone (calls),
Contact ID, and Alert Tone.
– The Camera screen by pressing the My
Images soft key
My Sounds — Lets you assign sound files as ringers for Ringtone
(calls), Contact ID, and Alert Tone.
– The Edit Contact screen by selecting the picture ID field and pressing
the Set soft key.
Tip: To launch the Multimedia menu using a voice command — In standby
2. Highlight a picture, then press
to expand the
mode, press and hold
until the phone prompts, “Say a
highlighted picture to fill the screen.
command.” Say “Go to Multimedia” into the microphone.
3. Press the Options soft key.
2. Select the desired sub-menu. The following sections
describe the above listed sub-menus in greater detail.
85
A pop-up menu containing the following options appears in
the display:
My Ringtones
My Ringtones lets you assign ringtones
(preloaded and downloaded) for Ringtone,
Contact Id, and as Alert Tone.
•
Send — Lets you send the selected image to a specified recipient
in a Picture message.
• Online Album — Send a copy of the highlighted picture to your
1. At the Multimedia menu, select My
Ringtones. A list of ringtones
appears in the display.
Album on your Wireless Carrier’s server (using a Picture message).
•
Set As — Lets you assign the selected picture as the Main
Wallpaper, as the Picture ID for a Contact, or as the Front
Wallpaper
.
Tip: You can also access My Ringtones from:
•
•
•
•
Rename — Lets you rename the picture.
Lock Unlock — Lets you prevent/permit picture deletion.
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones.
/
Erase Files — Erases one or more selected pictures.
Picture Info — Displays information about the picture, such as
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Ringtones.
the picture Name, creation Date and Time
,
Resolution, and the
data Size
.
4. Select the desired option.
2. Use the Navigation key to highlight a particular ringtone.
5. To return to the previous menu, press
. To return to
•
•
Press
to PLAY the ringtone.
standby mode, press
.
Press the Info soft key to show the Title and File Type.
3. Press the Set As soft key to assign the highlighted
ringtone. The following options appear in the display:
•
Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
Multimedia
86
•
•
Contact ID — Lets you assign the selected ringtone as the
My Sounds
distinctive ringer for a Contact.
My Sounds lets you record voice memos
and lets you assign preloaded and
downloaded sound files as Ringtones,
Contact IDs, or Alert Tones.
Alert Tone — Lets you assign the selected ringtone to All Msg
,
Text Msg Picture Msg, or Voicemail Msg
,
.
4. Select the desired option.
5. When using a downloaded ringtone, press the Options soft
1. At the Multimedia menu, select My
Sounds. Record New and a list of
sound files appears in the display.
key and the following options appear in the display:
•
•
•
•
Lock Unlock — Lets you prevent/permit file deletion
/
Erase — Erases the selected file.
Tip: You can also access My Sounds from:
Rename — Lets you rename the selected file.
–A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
selecting My Sounds
Ringtone Info — Displays information about the selected file,
such as the file name, the file type, and the data size .
• Send Via Bluetooth — Lets you send a copy of the selected file to
another device over a Bluetooth connection.
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting My Sounds.
6. Select the desired option.
2. Use the navigation keys to highlight the Record New
7. To return to the previous menu, press
standby mode, press
. To return to
option, then press
to record a voice memo. (See
.
information.)
3. Press the Options soft key.
•
For a preloaded sound file, a pop-up menu containing the following
options appears in the display:
87
–
–
Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
–
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
–
–
–
–
Rename — Lets you rename the sound file.
Lock Unlock — Lets you protect the sound file from being deleted.
/
–
–
Erase All — Erases all sound files.
Erase All — Erases all sound files.
Sound Info — Displays information about the sound file, such as the
Title, File Size, and File Type.
Sound Info — Displays information about the sound file, such as the
file name, file type, and the data size.
•
For a recorded sound file, a pop-up menu containing the following
options appears in the display:
4. Select the desired option.
5. To return to the previous menu, press
. To return to
–
Send — Lets you send the selected sound file to a specified recipient in
standby mode, press
.
a Picture message.
–
Set As — Lets you assign the selected sound file as the Ringtone or
as the Contact ID for a Contact or an Alert Tone for Text, Picture, or
Voicemail messages.
Record New Voice Memo
You can use your phone to record voice memos for later
playback. You can also record the caller on the other end of the
line during a phone conversation.
–
–
–
–
Rename — Lets you rename the sound file.
Lock Unlock — Lets you protect the sound file from being deleted.
/
Erase All — Erases all sound files.
Note: There is limited space for the length of recordings.
Sound Info — Displays information about the sound file, such as the
Title, File Size, and File Type.
•
The maximum length for a single voice memo is 60 seconds.
•
For a downloaded sound file, the following options appear in the
display:
–
Send — Lets you send the selected sound file to a specified recipient in
a Picture message.
–
Online Album — Lets you send the selected sound file to an Online
Album on U.S. Cellular’s server. For details, contact U.S. Cellular.
Multimedia
88
Record a Voice Memo
1. At the Multimedia menu, select My
Sounds ➔ Record New. The
Record New screen appears in the
display.
Review Voice Memos
If you’ve saved any voice memos, you can
review them anytime.
1. At the Multimedia menu, select My
Sounds. A list of sound files appears
in the display.
Tip: You can also set your phone to record a Voice
Memo while in a call. This lets you record the
2. Use the navigation keys to highlight
the voice memo you wish to review.
3. Press
to play the voice memo.
2. Press
, then start speaking. As it
•
To stop the memo, press . Press
again to restart playing the memo.
is recording the phone displays a
countdown timer that shows the
seconds remaining for the recording.
When the voice memo finishes
playing, the selected voice memo
remains highlighted in the list of
sound files.
•
To pause the memo, press the Pause
soft key. When a memo is paused, select
Resume to continue recording.
3. Press
once you’re finished recording. The new
Erase a Voice Memo
recording is automatically saved.
1. At the Multimedia menu, select My Sounds. A list of
sound files appears in the display.
2. Use the navigation keys to highlight the voice memo you
wish to erase.
89
3. Press the Erase soft key. “Erase Sound?” appears in the
display.
4. Press the Yes soft key to erase the selected voice memo or
press the No soft key to return to the list of sound files.
Multimedia
90
Section 13: Tools
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, perform
calculations, and more.
•
•
Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of keypresses.
Tools Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Calendar, and Memo Pad that run on your
phone. You can use your phone to schedule events, set
reminders, perform calculations, and more with the functions
provided by this useful feature.
Tip: To launch the Tools menu using a voice command — In standby mode,
press and hold
until the phone prompts, “Say a command.” Say
“Go to Tools” into the microphone.
2. Select the desired Tool sub-menu.
Opening Tools Menu
1. In standby mode, press Menu ( ), then select Tools. The
following sub-menus appear in the display:
The following sections provide detailed descriptions of the
Tools and how to use their functions.
Voice Service
•
•
•
Voice SVC — Lets you access voice recognition functions.
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
Memo Pad — Lets you store and review useful information.
Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
•
•
•
World Time — Lets you view the current time of day or night in
1. At the Tools menu, select Voice SVC.
another part of the world.
The following options appear in the display:
Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
•
Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
Stop Watch — Lets you view the amount of time.
91
–
–
–
page 50.)
Lookup — Lets you look up and display contact information for any
name stored in your Contacts list by saying the name. (For more
Go to — Lets you access all of the Main Menus on your phone.
Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
into your phone. (Also see “Making a Call — Voice Dialing”
information.)
•
Voice Settings — Lets you adjust VoiceSignal to better suit your
needs.
2. Select the desired sub-menu.
Voice Commands
To start VoiceSignal, do one of the following:
•
In standby mode, press and hold
Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
At the Tools menu, select Voice SVC Voice Command
.
–
–
“
•
➔
.
Note: Speaking clearly, say the command that you want to use.
Note: You can also set your phone to start VoiceSignal when you open the
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
VoiceSignal includes the following commands:
If, after a few more seconds, it still has not recognized a command, it
tells you “Sorry, no match found,” and cancels voice recognition.
–
Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
Voice Command Tips:
•
•
Make sure you wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking on the phone.
Tools
92
Voice-Activating Your Contacts List
To change the way VoiceSignal uses choice lists:
ᮣ
At the Voice SVC sub-menu, select Voice Settings ➔
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
Choice Lists the following options appear in the display:
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Ending Calls Before Restarting the VoiceSignal Software
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Always Off—VoiceSignal never displays a choice list.
Select the preferred Choice List behavior.
Voice Settings
Sensitivity
Choice Lists
1. At the Voice SVC sub-menu, select Voice Settings ➔
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
3. To accept the new setting, press
.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
93
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
appearing in the display.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
Digit Dialing to factory defaults. (For more information, refer to “Reset
Digits” on page 95.)
2. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
•
•
If the recording was good, say “Yes.”
•
•
•
•
Use Adapt Digits in a quiet place.
If you need to re-record, say “No.”
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
Adapt Digits
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
To adapt digit dialing, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
Tools
94
Reset Digits
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
•
Key/Ear Mic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
The phone prompts you to confirm digit reset.
2. To reset your digit adaptation, press the OK soft key. To
•
Key/Flip — Press and hold
VoiceSignal for one call.
or open the flip to activate
cancel, press the Back soft key.
Sound
2. Select the Voice Launch option you want.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
About VoiceSignal
This option causes the About Nuance screen to appear in the
display, showing version and build information about the
VoiceSignal software included on your phone.
1. At the Voice SVC sub-menu, select Voice Settings ➔
Sound. The following options appear in the display:
•
•
•
•
Prompts — Enables (On) or disables (Off) playing of prompts.
Digits — Enables (On) or disables (Off) playing of digits.
Names — Enables (On) or disables (Off) playing of names.
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
The About Nuance screen appears in the display showing
the version level of the VoiceSignal software currently
installed on your phone.
Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
95
Enter text changes using the keypad. (For more
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
5. To erase the memo you are viewing, press the Options soft
key, then select Erase. You are prompted to verify the
erasure.
Add a Memo
1. At the Tools menu, select Memo Pad. If you have any
stored memos, they appear as a list in the display. If this is
your first time in Memo Pad, “No memos” appears in the
display.
•
•
To erase the memo, press the Yes soft key.
To keep the memo, press the No soft key.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
2. To add a new memo, press the Add soft key.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
4. When you’re finished entering memo text, press
to
save the memo.
1. At the Tools menu, select Alarm Clock. The following
View, Edit, and Erase Memos
1. At the Tools menu, select Memo Pad. A list of your stored
options appear in the display:
•
•
•
Alarm 1
Alarm 2
Alarm 3
memos appears in the display.
2. Highlight the desired memo.
3. To view the memo, press VIEW ( ).
4. To edit the memo you are viewing, press the Edit soft key.
Tools
96
2. Select an Alarm. A Set Alarm screen
appears in the display containing the
following options:
ᮣ
To silence the alarm, use the Navigation key to select
Dismiss.
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
•
•
•
•
Alarm
If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
Time
Frequency
Ringer
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
3. Highlight the options you wish to
change, then select values for the
options using the Left and Right
navigation keys.
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Turn Off the Alarm
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for your reuse.
To enter the Time for the alarm, use
the keypad.
1. At the Tools menu, select Alarm Clock.
2. Highlight Alarm 1 / Alarm 2 / Alarm 3.
4. When you’re finished entering and
3. Press the Options soft key and select Off. The highlighted
Alarm is turned off, but the alarm settings are retained for
later reuse.
selecting values for the alarm, press
. The alarm is set
and the alarm icon (
) appears in the top of the display.
When an Alarm Sounds
Reset the Alarm
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
Resetting one or all Alarms erases all of your Alarm settings and
restores the default settings.
1. At the Tools menu, select Alarm Clock.
97
2. If desired, highlight Alarm 1 / Alarm 2 / Alarm 3.
Press the Options soft key and select Go to City, then press
the Navigation key or the Volume key Up or Down.
3. Press the Options soft key. Select from the following
options:
The following time zones/cities are supported:
• On
/
Off — Enables or disables the highlighted Alarm, using
EST/EDT:
Caracas
La Paz
Newfoundland
current settings.
Miami
New York
• Reset Alarm — Resets the highlighted Alarm to default settings.
• Reset All — Resets all Alarms to default settings.
Buenos Aires Brasilia
Mid Atlantic
Cape Verde
World Time
Lisbon
London
Paris
Rome
Berlin
Athens
Helsinki
Istanbul
World Time lets you view the time of day or
night in another part of the world. World
Time displays time in the 24 different time
zones around the world.
Nairobi
Moscow
Kabul
Jidda
Tehran
Abu Dhabi
New Delhi
Bangkok
Seoul
Tashkent
Kathmandu
Hong Kong
Adelaide
Wellington
Mumbai
Alma-ata
Beijing
1. At the Tools menu, select World
Time. A world map appears in the
display.
Colombo
Jakarta
Tokyo
Guam
2. To display the time zone and city that
you wish to view, press the
Navigation key Left or Right.
– or –
Sydney
Okhotsk
Midway
Auckland
Samoa
HAST/HADT: AKST/AKDT:
Honolulu
Hawaii
Alaska
Tools
98
2. Enter the first number in your calculation using the keypad
PST/PDT:
San Francisco Denver
Los Angeles Phoenix
3. Do one of the following:
MST/MDT:
CST/CDT:
(numbers can be up to nine digits long).
Dallas
Chicago
•
To enter a decimal point, press
digits after a decimal point.)
. (Calculator only accepts 2
•
To change the sign for a number to a negative, press
.
•
To show Daylight Savings Time (DST) for the displayed time zone,
) appears]; or
3. Use the Navigation key to set the type of calculation that
press the DST On soft key [the DST on icon (
press the DST Off soft key to display standard time.
you wish to perform. Your choices are as follows:
•
To set the displayed time zone as the home time zone for your
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
] Multiplication
phone, press the Options soft key and select Set as home zone
You are prompted to confirm the Home Zone change. To save your
change, press the Yes soft key. The home zone marker moves to
the displayed time zone.
.
-
] Subtraction
=
+] Addition
•
•
To keep the displayed time zone as a second, default time zone,
press . You are returned to the Tools menu.
÷] Division
For nested operations [such as (1.81 + 9.34) / 5.22] and to
To discard the displayed time zone and close the World Time
2
calculate powers (such as 3 ), press the Operator soft key.
screen, press
. You are returned to the Tools menu.
The following options appear in the display:
Calculator
•
•
•
(
)
— Beginning of nested operation
— Ending of nested operation
You can perform calculations, including
addition, subtraction, multiplication, and
division using your phone.
Power — Raise the current number to the power of your next
entry
1. At the Tools menu, select Calculator.
The Calculator appears in the
display.
4. Use the keypad to enter the next number in your
calculation.
99
5. Repeat steps 3 and 4 as needed.
6. To perform the calculation and view the result, press
To clear your last operation or number entry, press
To clear all of your entries, press the Clear soft key.
Stop Watch
You can use this menu to set a stop watch.
1. At the Tools menu, select Stop
Watch.
Converter
The conversion menu provides the following conversion features:
.
•
•
•
•
•
•
Currency
Length
.
Weight
Volume
Area
Temperature
To convert a currency, length, weight,
volume, area, or temperature, do the
following:
2. Press
to Start, Stop, and
continue the stopwatch count.
1. At the Tools menu, select Converter.
3. Press the Record soft key at the
start of each succeeding event/lap to
record the completion time for the
previous event/lap.
2. Select the conversion feature you
wish to use. The selected conversion feature screen
appears in the display with the From unit field highlighted.
3. Use the Left and Right navigation
keys to select the unit to be
converted From.
4. Press the Reset soft key to erase all
stop watch (lap) times recorded.
4. Highlight the From quanity field.
Tools
100
5. Use the keypad to enter the quantity you want converted in
4. To change the highlighted exchange
rate, press EDIT ).
the From quantity field.
(
6. Highlight the To unit field.
5. Use the keypad to change the
current exchange rate. (For more
7. Use the Left and Right navigation
keys to select the units to be
converted From and To. The
converted quantity appears in the To
quantity field.
•
To save the changed exchange rate,
press OK ).
(
•
To discard your changes and return to the Currency Converter
screen, press the Cancel soft key.
Note: To include a decimal point, press
.
Currency — Adding Exchange Rates
Currency — Reviewing/Editing Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1. At the Tools menu, select Converter ➔ Currency.
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The
Exchange Rate list for the USD (U.S.
Dollars) currency appears in the
display.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
3. Highlight the currency exchange rate
you want to review or change.
101
3. Press the Add soft key. The Add
Exchange Rate screen appears in
the display with the Base field
highlighted.
9. To save the new exchange rate,
press . The Exchange Rate list
for the USD (U.S. Dollars) currency
appears in the display with your new
exchange rate at the bottom of the
list.
4. Use the Left and Right navigation
keys to select the Base currency to
be converted from.
Currency — Erasing Exchange Rates
5. Highlight the Currency field.
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
6. Enter an identifier of up to 5
characters for the new currency
using the keypad. (For more
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
3. Highlight the currency exchange rate
7. Highlight the Exchange Rate field.
to be erased.
8. Enter a decimal exchange rate for the new currency using
4. Press the Erase soft key. You are
prompted to confirm the erasure.
•
To erase the highlighted exchange rate,
press the Yes soft key.
Note: Press the
key to enter the decimal point.
•
To keep the highlighted exchange rate,
press the No soft key.
The Exchange Rate field only accepts up to 5 digits after the decimal
point.
Tools
102
Tip Calculator
Tip Calculator automatically calculates the
following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total amount
of the check, a selected percentage, and
the number of people paying.
1. At the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
2. Use the keypad to enter the total amount of the bill.
Note: To include a decimal point, press the
key.
3. If needed, highlight the Tip field and use the keypad to
change the tip percentage.
4. If needed, highlight the # Paying field and use the keypad
to change the number of persons paying.
5. The amount of the Tip, the bill Total, and the amount each
person should pay appear in the lower half of the screen.
103
Section 14: Changing Your Call and Phone Setting
This section explains how to customize your call and phone
settings to suit your needs and preferences.
2. Select the desired option or sub-menu.
Location
Accessing Your Call and Phone Settings
1. In standby mode, press Menu ( ), then select Settings.
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Tip: To launch the Settings menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a command.”
Say “Go to Settings” into the microphone.
Note: Contact U.S. Cellular to determine whether, when, or where location-
based services are available.
The Settings menu appears in the display showing the
following options and sub-menus:
1. At the Settings menu, select Location.
•
•
•
•
•
Location — Set your phone to send location data continually or
The following options appear in the display:
only when you dial 911.
•
Location On — GPS location is on whenever you make or receive
a call, wherever the feature is available.
Call Settings — Set how your phone handles voice and data
calls.
•
911 Only — GPS location is on only when you dial 911.
Phone Settings — Set your phone’s safety, network, and security
options.
2. Select the desired Location setting. You’re returned to the
Settings menu.
Memory Info — Select where photos are stored, manage your
phone’s memory, and format and manage Memory Card storage.
Call Settings
The Call Settings options let you select how your phone handles
voice and data calls.
Phone Info — Access information about your phone, such as your
phone number, meanings of phone status icons, hardware and
software versions, and more. (Some of this information is valuable
to you if you need to call for customer support.)
Changing Your Call and Phone Setting
104
To access the Call Settings sub-menu, do the following:
Auto Answer
ᮣ
At the Settings menu, select Call Settings. The Call
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
Settings sub-menu appears in the display.
1. At the Call Settings sub-menu, select Auto Answer. The
The following sub-sections detail the available Call Settings.
following options appear in the display:
Call Answer
•
•
Off — Disables automatic answering of calls
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
After 1 Second — Phone automatically answers calls after 1
second
•
•
After 3 Seconds — Phone automatically answers calls after 3
•
•
•
Press any key
Press the Send key
Open the flip
seconds
After 5 Seconds — Phone automatically answers calls after 5
seconds
1. At the Call Settings sub-menu, select Call Answer. The
Call Answer sub-menu with the following options appears
in the display:
2. Select the desired setting.
Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
•
Any Key — Press any key except the
key to answer an incoming call.
,
, or Left soft
•
•
Send Key — Press
to answer an incoming call.
1. At the Call Settings sub-menu, select Auto Retry. The
Auto Retry sub-menu with the following options appears
in the display:
Flip Open — Open the flip to answer an incoming call.
Tip: You can set your phone to answer calls automatically, without any input
•
Off — Disables automatic redialing of numbers
2. Select the method you wish to use for answering calls.
105
•
•
•
Every 10 Seconds — Phone automatically redials a number
•
To return to the Call Settings sub-menu, press the No soft key.
every 10 seconds
2. When you press the Yes soft key, the following options
Every 30 Seconds — Phone automatically redials a number
every 30 seconds
appear in the display:
•
TTY Full — Enables TTY mode and disables microphone and
earpiece
Every 60 Seconds — Phone automatically redials a number
every 60 seconds
•
•
•
TTY + Talk — Enables TTY mode and microphone
TTY + Hear — Enables TTY mode and earpiece
TTY Off — Disables TTY mode
2. Select the desired setting.
TTY Mode
Your phone is fully TTY
3. Select the desired TTY Mode setting.
compatible. TTY equipment is
connected to your phone through
the headset connector on the
right side of the phone. TTY
Mode must be enabled before
you can use your phone with a
TTY device.
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
+
Incorrect
Voice Privacy
When Voice Privacy is enabled (that is, set to Enhanced), it turns
on advanced voice encryption.
Correct
1. At the Call Settings sub-menu, select Voice Privacy. The
1. At the Call Settings sub-menu, select TTY Mode. You are
prompted to confirm you want to change the current TTY
Mode setting.
following options appear in the display:
•
•
Standard — Voice privacy is disabled.
Enhanced — Voice privacy is enabled.
Note: The “Enabling TTY may impair headset use and non-TTY
accessory performance” message pops up when you select TTY
Mode.
2. Select the Voice Privacy setting of your choice.
•
To access the TTY Mode options, press the Yes soft key.
Changing Your Call and Phone Setting
106
Data Settings
Phone Settings
Use the Data Settings sub-menu to configure data connection
settings.
The Phone Settings options let you tailor your phones basic
operations. To access the Phone Settings sub-menu, do the
following:
1. At the Call Settings menu, select Call Settings ➔ Data
ᮣ
At the Settings menu, select Phone Settings. The Phone
Settings. The following options appear in the display:
Settings sub-menu appears in the display.
•
•
•
Data Off — No incoming data calls accepted.
Data For Next Call — Wait for data call for the next 10 minutes.
The following sub-sections detail the available Phone Settings.
Data Until Powered Off — Data calls only, no voice calls
accepted, until you power the phone off and on again.
Airplane Mode
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
2. Select the data setting of your choice.
International Dialing
Use this option to select a frequently-dialed country code for
dialing by the International Dialing shortcut. (For more
1. At the Phone Settings sub-menu, select Airplane Mode.
The following options appear in the display:
1. At the Call Settings sub-menu, select International
•
•
On — Disables the radio transmitter and receiver in your phone
Dialing. A list of country codes appears in the display.
Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting.
2. Select the country code of your choice.
107
Shortcut Key
1. At the Phone Settings sub-menu, select Language. The
following options appear in the display:
Shortcut Key lets you set which feature, function, or application
launches when you press the Up navigation key while in standby
mode.
•
•
English
Español
1. At the Phone Settings sub-menu, select Shortcut Key.
2. Select your language preference.
The following options appear in the display:
Security
•
•
•
•
•
•
•
•
•
•
•
My Images
My Ringtones
My Sounds
Inbox
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
To access the Security menu, do the following:
Tools
1. From the Settings menu, select Phone Settings
➔
Security
.
Calculator
Tip Calculator
Converter
Calendar
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
Alarm Clock
Stop Watch
The “Enter Code” prompt disappears and the Security
2. Select the desired setting.
menu appears in the display.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
Changing Your Call and Phone Setting
108
Lock Phone
2. Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
3. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
1. At the Security sub-menu, select Lock Phone. The
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
following Device Lock Mode options appear in the display:
•
Lock — Locks the phone immediately. (The phone stays locked
until you enter the lock code.)
•
•
Unlock — Unlocks the phone.
On Power up — The phone locks automatically the next time your
phone is powered on. (The phone stays locked until you enter the
lock code.)
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
2. Select the Device Lock Mode option of your choice.
Change Lock
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1. At the Security sub-menu, select Change Lock. You’re
prompted to enter the new lock code.
109
•
To retain your current settins and return to the Security sub-menu,
press the No soft key.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Erase All Entries
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Erase All Entries erases all information from your Contacts list.
Note: To completely remove any personal information stored on your device,
Store Emergency Numbers
1. At the Security sub-menu, select Emergency #.
1. At the Security sub-menu, select Erase All Entries. You’re
2. Select from the three emergency number entries.
prompted to enter the lock code again.
3. Enter an emergency number (up to 32 digits in length).
2. Enter the four-digit lock code using the keypad.
4. Press
to save the number that you entered.
Note: The default lock code is the last four digits of your mobile phone
Call Emergency Numbers in Lock Mode
number.
1. In standby mode, enter the emergency number.
The “Erase All Entries?” prompt appears in the display.
2. Press
to place the call.
•
•
To erase all Contacts list entries, press the Yes soft key.
Resetting Your Phone
To keep the current Contacts list entries, press the No soft key.
Reset Phone returns all setup options to their factory default.
1. At the Security sub-menu, select Reset Phone. You are
prompted to confirm that you want to restore your phone’s
default settings (except for the Contacts and Voice Dial).
Restriction
Restriction lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
•
To restore default settings, press the Yes soft key.
1. At the Security sub-menu, select Restriction.
Changing Your Call and Phone Setting
110
The following options appear in the display:
2. Select the desired NAM option. The phone powers itself off
and back on.
• Outgoing — Restrict/allow outgoing calls.
• Incoming — Restrict/allow incoming calls.
System Select
• Contacts — Restrict/allow all access to your Contacts list.
The System Select menu allows you to select the roaming
setting for your phone.
2. Highlight the desired Restriction and press
. The
following options appear in the display:
1. At the Phone Settings sub-menu, select System Select.
• On — Restrict (block) selected calls.
The following roaming options appear in the display:
• Off — No restriction on selected calls.
•
Home Only — Your phone is available for normal operation only
within your designated coverage area.
Note: Default setting for all Restrictions is Off
.
•
Automatic — The Preferred Roaming List (PRL) is used to acquire
service. If no preferred systems are found, any digital system is
acquired.
3. Select the desired setting.
NAM Selection
2. Select the desired roaming option.
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
1. At the Phone Settings sub-menu, select NAM Selection.
adjusts time and date automatically.
The following options appear in the display:
1. At the Phone Settings sub-menu, select Set Time. The
•
•
NAM1 — Your service contract has one phone line.
following options appear in the display:
NAM2 — Your service contract has two phone lines.
•
Set Time
111
•
Set Date
The following options appear in the display:
2. Select the desired option.
•
•
On — Quick Search is enabled
Off — Quick Search is disabled
For Set Time, the Set Time screen appears in the display.
For Set Date, the Set Date screen appears in the display.
2. Select the desired Quick Search setting.
Searching for a Menu Item
1. In standby mode, press the first few numeric keys that
correspond to the letters of the desired Menu item name.
For example, to search for “Inbox” you could enter:
I
N
B
•
Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12-
hour format.
2. Press the Down navigation key. The Menu List screen
appears in the display showing all menu items with names
that correspond to your key entries.
•
•
•
Use the Left and Right navigation keys to select am or pm
Press to save the your time setting.
Enter the current date using your keypad.
.
3. Select the desired menu item.
The month and day must be entered using two digits each. The
year must be entered using all four digits.
Searching for a Contact
1. In standby mode, press the first few numeric keys that
correspond to the letters of the Contacts name.
•
Press
to save your date setting.
Quick Search
Quick Search is an easy way to locate Menu items and Contacts.
1. At the Phone Settings sub-menu, select Quick Search.
Changing Your Call and Phone Setting
112
For example, to search for “Sally” you could enter:
• Available unused memory
• My Images memory usage
• My Ringtones memory usage
• My Sounds memory usage
S
A
L
• Applications memory usage
• PIC Msg memory usage
2. Press the Up navigation key. The Find screen appears in
the display showing the Contacts entries with names that
correspond to your key entries.
2. To return to the Settings menu, press
.
My Images
3. Highlight the desired Contacts entry.
My Images lets you review a list of the pictures you have stored
on your phone and free memory for reuse by deleting unwanted
pictures.
4. Press
to call the highlighted Contact.
Memory Info
Memory Info options let you review your phone’s available
memory and help you manage your files stored there.
Tip: You cannot view your pictures from this files list. To view your pictures,
press
➔
Menu
➔
Multimedia
➔
My Images.
To access the Memory Info options:
1. At the Memory Info screen, select My Images. The My
Images screen appears in the display listing the picture
files currently stored in your phone.
ᮣ
At the Settings menu, select Memory Info. The following
options appear in the display:
Memory Usage
2. To delete one or more image files, press the Erase soft key.
1. At the Memory Info screen, select Memory Usage. The
Memory Usage screen appears in the display showing the
following information:
The Erase Picture screen appears in the display.
•
To MARK individual picture files for erasure, select each file. A
checkmark appears to the left of each picture entry.
• Total Used memory
•
To Mark All picture files for erasure, press the Mark All soft key.
113
•
To erase the marked files, press the Done soft key.
My Sounds
3. To return to the Memory Info menu, press OK
(
).
My Sounds lets you review the a list of recorded Voice Memos
and sound files you have stored on your phone and free memory
for reuse by deleting unwanted files.
My Ringtones
My Ringtones lets you review a list of the downloaded ringtone
files you have stored on your phone and free memory for reuse
by deleting unwanted downloaded ringtones.
Tip: You cannot review your recorded Voice Memos and sound files from this
files list. To review your recorded Voice Memos and sound files, press
➔
Menu
➔
Multimedia
➔
My Sounds.
Tip: You cannot review your downloaded ringtones from this files list. To
1. At the Memory Info screen, select My Sounds. The My
Sounds screen appears in the display listing the recorded
sound files currently stored in your phone.
review your downloaded ringtones, press
➔
Menu
➔
Multimedia
➔
My Ringtones.
1. At the Memory Info screen, select My Ringtones. The My
Ringtones screen appears in the display listing the
2. To delete one or more recorded sound files, press the Erase
soft key. The Erase Sound screen appears in the display.
downloaded ringtone files currently stored in your phone.
•
To MARK individual sound files for erasure, select each file. A
checkmark appears to the left of each sound entry.
2. To delete one or more ringtone files, press the Erase soft
key. The Erase Ringtone screen appears in the display.
•
•
To Mark All sound files for erasure, press the Mark All soft key.
•
To MARK individual ringtone files for erasure, select each file. A
checkmark appears to the left of each ringtone entry.
To erase the marked files, press the Done soft key.
3. To return to the Memory Info menu, press OK
(
).
•
•
To Mark All ringtone files for erasure, press the Mark All soft key.
To erase the marked files, press the Done soft key.
3. To return to the Memory Info menu, press OK
(
).
Changing Your Call and Phone Setting
114
2. Use the Up and Down navigation keys or the Volume key to
Phone Info
scroll through the icons list.
The Phone Info options show you the hardware and software
versions of your phone, definitions of the icons that appear at the
tops of the phone displays, and the phone number assigned to
your phone.
3. To return to the Phone Info menu, press
.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
U.S. Cellular.
1. At the Settings menu, select Phone Info ➔ Version.
Your phone’s software (S/W), preferred roaming list (PRL),
1. At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by U.S. Cellular
appears in the display.
SM
easyedge (Easyedge), and hardware-related
information (H/W, MEID, and pESN) appears in the display.
2. To return to the Phone Info menu, press
.
2. To return to the Phone Info menu, press
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1. At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
115
Section 15: Calendar
Calendar
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
–
–
–
Go to Today — Lets you jump to today’s date.
Erase Old — Lets you erase past events.
Erase all — Lets you erase all events.
Select the desired option to perform the related process.
3. Open the highlighted date by
pressing
. A list of scheduled
View an event
1. At the Tools menu, select Calendar.
events appears in the display.
4. Select the desired event. Information
for the selected event appears in the
display.
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
Add a New Event
2. Use the following keys to navigate
1. At the Tools menu, select Calendar.
your calendar and highlight a desired date.
•
To move from one day to another, use the Left/Right navigation
keys.
To move from one week to another, use the Up/Down navigation
keys.
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
•
•
•
•
To view previous months, press the Volume key Up.
2. Highlight the date of the new event.
To view future months, press the Volume key Down.
To access other options, press the Options soft key while viewing
the calendar. The following options appear in the display:
3. Press the Add soft key. The New Event screen appears in
the display.
–
Go to Date — Lets you jump to any date you specify.
Calendar
116
4. To select and enter details of the event, use the Navigation
key and the keypad. (For more information, refer to
10. Highlight the Alert time field, use the Up and Down
navigation keys, then select the amount of time before the
event occurs that you wish to be notified by an alert using
the Left and Right navigation keys.
5. Enter the Appointment Name for this event.
11. To store the event in your calendar, press SAVE (
alert will notify you prior to the event, if you set a
notification alert.
). An
6. Enter the start and End dates and
times for the event using the keypad.
Enter the dates and times for the
event using 2 digits for day, month,
hour, and minute entries. Use 4 digits
for year entries.
7. To change between AM and PM, use
the Left and Right navigation keys.
8. When you’re finished entering the dates and times, to
highlight the Alert field, use the Up and Down navigation
keys. To select a type of alert, use the Left and Right
navigation keys.
9. Highlight the Reminder field, and set the Reminder to Off
or to select a reminder interval using the Left and Right
navigation keys.
117
Section 16: Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Add New Device
To search for available Bluetooth devices:
1. In standby mode, press Menu ( ), then select Bluetooth
➔ Registered List ➔ Add New Device.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
If Bluetooth is off, you are prompted to “Turn Bluetooth
on?”.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
•
•
To turn Bluetooth on, press the Yes soft key.
To leave Bluetooth off, press the No soft key.
“Place device you are connecting to in discoverable mode
”
Turn Bluetooth On/Off
appears in the display.
When your phone’s Bluetooth function is turned on, you can use
the Bluetooth features available. When the Bluetooth function is
turned off, you cannot send or receive information via Bluetooth.
2. Place the Bluetooth device in discoverable mode. (For
more information, refer to the device user manual.)
3. Press OK
(
). Names of the
To save battery life or in situations where Bluetooth use is
prohibited, such as airline traveling, you can turn off the
Bluetooth wireless technology function.
available devices appears in the
display.
4. Highlight the device you want to pair
with your phone.
Bluetooth
118
5. Press PAIR (
) to pair the selected device with the
previously connected to your device.
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
Connecting to a Bluetooth Device
From the Registered List,
ᮣ
Select the desired device.
Note: If you are pairing with another handset, both devices prompt you to
enter a PIN. To pair the two handsets, enter the same PIN on both
devices.
Note: If you are unable to pair with the device a pop-up appears in the
display. To retry, press the Yes soft key.
Bluetooth Settings
6. Enter the device passkey or PIN and press
. The
1. In standby mode, press Menu ( ), then select Bluetooth
➔ Bluetooth Settings. The following options appear in the
display:
Bluetooth function pairs with the selected device, then
prompts you to confirm that you want to connect with the
device now.
• Enable Disable — Turns Bluetooth on or off.
/
•
•
To connect with the device now, press the Yes soft key.
• Discovery Mode — Lets other devices “see” (access) your device.
Select On for other devices to see your device, or Off for no visibility.
To connect with the device at a later time, press the No soft key.
Registered List
Registered List provides a list of Bluetooth
wireless technology devices previously
connected to your handset.
• Device Name — Shows the handset name. You may change this
name. Enter text changes and press
to save them.
• Supported Profiles — Lists and explains the Bluetooth profiles
supported by your phone.
ᮣ
In standby mode, press Menu ( ),
then select Bluetooth ➔ Registered
List. The Bluetooth screen appears in
the display showing a list of devices
• Device Info — Shows the Bluetooth Type, Status, and Address of
your phone.
2. Select the desired option to perform the related process.
119
Section 17: Toneroom
Toneroom is a pre-loaded application that lets you access your
Wireless Carrier’s on-line source for real music ringtones.
Managing Your Tones
ᮣ
In the Tone Room home page,
selet the My Tones tab. The
My Tones page appears in the
display.
Accessing Toneroom
1. In standby mode, press Menu
(
), then select Toneroom.
For more information about Tone
Room, contact your Wireless Carrier.
Note: The first time you launch Toneroom,
you are prompted to select the
language which will appear in
Toneroom screens.
2. The Tone Room home page
appears in the display.
Follow the links on the Tone
Room home page to find,
purchase (if needed), and
download ringtone files.
Toneroom
120
Section 18: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
121
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.06 W/Kg.
Body-worn: 0.665 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
122
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
123
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
Health and Safety Information
124
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
125
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
126
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
127
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
Health and Safety Information
128
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
129
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
130
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
Internet: http://www.nidcd.nih.gov/
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
131
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
UsingYourPhoneNearOtherElectronicDevices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov/niosh/topics/noise/
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
Health and Safety Information
132
•
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
For more information see:
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
133
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
Vehicles
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
Health and Safety Information
134
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
135
phone warranty if said accessories cause damage or a defect to
the phone.
FCC Notice and Cautions
FCC Notice
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Quincy, Massachusetts
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Health and Safety Information
136
Maintaining Your Phone's Peak Performance
Product Performance
Getting the Most Out of Your Signal Reception
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
137
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
•
•
If left unused, a fully charged battery will discharge itself over time.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
Health and Safety Information
138
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
0 °C (32 °F).
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
139
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
140
Section 19: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
141
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
142
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
143
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
144
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
145
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
Warranty Information
146
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Precautions for Transfer and Disposal
Phone: 1-800-SAMSUNG (726-7864)
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
©
2009 Samsung Telecommunications America. All rights
reserved.
147
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
148
Index
Making a Call — Number Entry
Dialing 18
Zoom 83
Camera Settings
Contacts
Numerics
Camera
Camera Options
Brightness 83
A
Adding Contacts
Adjust
Alerts 72
B
Adding 39
Battery
Deleting 48
Editing 40
Finding 37
Contacts Groups
Add 48
Charging 6
Installing 5
Removing 5
C
Call Functions
Quality 80
Resolution 79
149
Erase 48
Rename 48
F
Finding Contacts
Fun Tools
M
Memo Pad
Create a Draft Message 59
D
Display Setting
Display Settings
Backlight 70
Message Settings
Text 63
Messages
Receive 51
G
Games 65
Banner 70
Theme 69
Wallpaper 67
H
Settings 62
Types 50
Mode
Camera 16
Handsfree 16
Lock 17
Silent 15
Standby 14
HAC 133
I
L
E
easyedgeSM 65
Editing Contacts
Changing Speed Dial Numbers 45
Vibrate 15
M-Ratings 133
150
Phone Settings
Language 108
Security 108
Photos
Restriction 110
N
P
Personal Organizer
Calculator 99
Calendar 116
Phone
Features 9
Modes 14
View,Closed 9
Version 115
Sending 84
Settings
Picture Messages
Receiving 56
Settings 63
Setup
Location 104
Sound Settings
Alerts 72
R
Roaming 29
S
Volume 71
151
|