Samsung GH68 03555A User Manual

DUAL BAND

GSM TELEPHONE

SGH-T400

OWNER’S MANUAL

ELECTRONICS

Printed in Korea

Code No.: GH68-03555A

English. 2003/01. Rev.1.0

World Wide Web

www.samsungmobile.com

GLOBAL SYSTEMS FOR

MOBILE COMMUNICATIONS

Contents(continued)

Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . . 74

Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . . 75

Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . . 77

Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . . 77

Keypad Tone (Menu 4-5). . . . . . . . . . . . . . . . . . . . . . 78

Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . . 78

Power On/Off (Menu 4-7) . . . . . . . . . . . . . . . . . . . . . 78

Error Tone (Menu 4-8). . . . . . . . . . . . . . . . . . . . . . . . 79

Minute Minder (Menu 4-9). . . . . . . . . . . . . . . . . . . . 79

Connect Tone (Menu 4-10) . . . . . . . . . . . . . . . . . . . . 79

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Changing the Text Input Mode . . . . . . . . . . . . . . . . 45

Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Using the ABC Mode . . . . . . . . . . . . . . . . . . . . . . . . 48

Using the Number Mode . . . . . . . . . . . . . . . . . . . . . 50

Using the Symbolic Mode . . . . . . . . . . . . . . . . . . . . 50

Selecting Functions and Options . . . . . . . . . . . . . 51

Using the Menus . . . . . . . . . . . . . . . . . . . . . . . 53

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . . 57

Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . . 57

Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . . 58

Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . 58

Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . . 59

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Phone Settings (Menu 5-1). . . . . . . . . . . . . . . . . . . . 80

Network Services (Menu 5-2) . . . . . . . . . . . . . . . . . 86

Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . . 95

LCD/LED Settings (Menu 5-4). . . . . . . . . . . . . . . . . . 98

Browser Settings (Menu 5-5). . . . . . . . . . . . . . . . . . 100

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . . 60

Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . . 61

Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . . 63

Preset Message List (Menu 2-4) . . . . . . . . . . . . . . . 64

Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . . 65

Picture Messages (Menu 2-7) . . . . . . . . . . . . . . . . . 67

Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . . . . . . . 101

Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . . . . . . . 105

To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . . 107

Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . . 108

World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . . 109

Clock (Menu 6-7). . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Conversion (Menu 6-8) . . . . . . . . . . . . . . . . . . . . . . . 111

Timer (Menu 6-9). . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Stopwatch (Menu 6-10) . . . . . . . . . . . . . . . . . . . . . . 114

Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . 69

Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . . 69

Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . . 72

Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . . 72

Contents(continued)

Important Safety

Precautions

Read these guidelines before using your wireless

phone. Failure to comply with them may be danger-

ous or illegal. For more detailed safety information,

see “Health and Safety Information” on page 132.

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Bowling (Menu 7-1). . . . . . . . . . . . . . . . . . . . . . . . . 116

Speed Up (Menu 7-2) . . . . . . . . . . . . . . . . . . . . . . . 116

Honey Ball (Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . 117

WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 119

Home (Menu 8-1). . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Bookmark (Menu 8-2) . . . . . . . . . . . . . . . . . . . . . . . 120

Goto (Menu 8-3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Navigating with the WAP Browser . . . . . . . . . . . . 121

Entering Text, Numbers or Symbols . . . . . . . . . . . 123

Road Safety at All Times

Do not use a hand-held phone while driving; park the

vehicle first.

Switching Off When Refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Additional Services . . . . . . . . . . . . . . . . . . . . 124

ALS (Alternate Line Service) . . . . . . . . . . . . . . . . . 124

Switching Off in Aircraft

Wireless phones can cause interference. Using them

in aircraft is both illegal and dangerous.

Solving Problems . . . . . . . . . . . . . . . . . . . . . . 126

Reference Information . . . . . . . . . . . . . . . . . . 129

Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Health and Safety Information . . . . . . . . . . . . . . . 132

Switching Off in Hospitals

Switch off your phone near medical equipment.

Follow any regulations or rules in force.

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Quick Reference Card . . . . . . . . . . . . . . . . . . . 153

Interference

All wireless phones may be subject to interference,

which could affect their performance.

Special Regulations

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbid-

den to use it, or when it may cause interference or

danger (in a hospital for example).

Im p o rt a n t S a f e t y P re c a u t io n s

Unpacking

Your package contains the following items.

Radio Frequency Exposure

The design of this phone complies with Australian

Communications Authority (ACA) requirements

relating to radio frequency (RF) exposure. To maintain

compliance with these requirements, use only

Samsung-supplied or approved accessories. Use of

non-approved accessories may violate the

requirements.

Sensible Use

Hand Strap

Phone

Travel Adapter

Batteries

Use only in the normal position (held to the ear).

Avoid unnecessary contact with the antenna when

the phone is switched on.

Accessories and Batteries

Use only Samsung-approved accessories and

batteries.

Wearable

Ear-Microphone

Battery Charger

Owner’s Manual

Qualified service

Only qualified service personnel may install or repair

your phone.

In addition, you can obtain the following accessories

for your phone from your local Samsung dealer:

• Cigarette lighter adapter • Content download kit

• Car cradle

• Simple hands-free kit

• Data kit

• Standard battery

Note: There is a rubber dust cover fitted to the

connector on the bottom of the phone for

protection during shipment. When unpacking

the product, remove this cover and dispose of

it along with any other unwanted packaging.

Yo u r P h o n e

Your Phone

Closed View

Phone Layout

The following illustrations show the main elements

of your phone.

Antenna

Service light

Open View

Earpiece

External display

Display

Volume

During a call,

adjust the

earpiece volume.

In idle mode with

the phone open,

adjust the key

volume.

When held down

with the phone

closed, reject an

incoming call.

Key Description

Perform the functions indicated by the text

above them (on the bottom line of the

display).

(soft keys)

In the menu facility, scroll through the

menu options and phonebook memory.

In idle mode,

the Messages menu,

access the Ring Tone menu.

allows you to access

allows you to

Microphone

Yo u r P h o n e

Display

Display Layout

Key Description (continued)

The display comprises three areas.

Deletes characters from the display.

In idle mode, launches the WAP Browser

directly.

Icons

Makes or answers a call.

In idle mode, recalls the last number dialled,

received or missed.

Text and

graphic area

In the menu facility, selects a menu function

or stores information that you have entered

(such as a name) in the phone or SIM

memory.

PhoneBook

Soft keys

Ends a call. When held down, switches the

phone on and off.

In the menu facility, cancels your input and

returns to the idle mode.

Area

First line

Description

Displays various icons (see page 14).

When held down in idle mode, accesses

your voice mail.

Middle lines Display messages, instructions and

any information that you enter

Enter numbers, letters and some special

characters.

(number to be dialled, for example).

Last line

Shows the functions currently

assigned to the two soft keys.

Used for various purposes in different

functions.

When held down while entering a number,

enters a pause.

When held down in idle mode,

activates/deactivates the silent mode.

Yo u r P h o n e

Icons

Backlight

The display and keypad are illuminated by a

backlight. When you press any key, the backlight

illuminates. It turns off if no key is pressed within a

given period of time, depending on the Backlight

option set in the Phone Settings menu. The

backlight remains on at all times when the phone is

connected to an optional car kit.

Shows the received signal strength. The

greater the number of bars, the stronger

the signal.

Appears when a call is in progress.

To specify the length of time for which the backlight

is active, set the Backlight menu option; see

page 82 for further details.

Appears when the phone can not find a

signal.

Appears when a new text message has

been received.

External Display

Appears when a new voice mail message

has been received.

Your phone has an external display on the cover,

showing the signal strength and battery strength. It

indicates that you have an incoming call or message,

notifies you of any missed calls, indicates whether

the vibrate mode is on and notifies you at the

specified time when you set an alarm.

Appears when the vibrate mode is on;

the phone vibrates rather than rings

when you receive a call.

Appears when you set an alarm.

When you hold down one of the volume keys in idle

mode with the phone closed, the external display

backlight illuminates.

Shows the level of your battery. The

more bars you see, the more power you

have left.

Yo u r P h o n e

Getting Started

Installing the SIM Card and the Battery

Service Light

When you subscribe to a cellular network, you are

provided with a SIM card loaded with your

subscription details, such as your PIN, any optional

services available and so on.

The service light is in the top right-hand corner of the

phone. It flashes when services are available on the

phone.

To activate or deactivate use of the service light, set

the Service Light menu option; see page 83 for

further details.

• Keep all miniature SIM cards out of the reach of

small children.

• The SIM card and its contacts can easily be

damaged by scratches or bending, so be careful

when handling, inserting or removing the card.

• Before installing the SIM card, always make sure

that the phone is switched off before you remove

the battery.

Service light

1. If necessary, switch off the phone by holding

down

until the closing animation is

displayed.

2. Push the catch above the battery on the back of

the phone and hold it in this position. Lift the

battery away.

Ge t t in g S t a rt e d

3. Insert and slide the SIM card under the two tabs,

ensuring that the notched corner is top left and

the gold contacts of the card face into the phone.

Charging a Battery

Your phone is powered by a rechargeable Li-ion

battery. Use only approved batteries and chargers.

Ask your local Samsung dealer for further details.

Note: You must fully charge the battery before using

your phone for the first time. A discharged

standard battery is fully recharged in

approximately 160 minutes.

Using a Travel Adapter

The phone can be used while the battery is charging.

4. Place the battery back on the phone. First insert

the teeth on the bottom of the battery into the

corresponding slots, then push the battery against

the back of the phone until it clicks into place.

Make sure that the battery is properly installed

before switching the phone on.

1. Connect the travel adapter connector into the

bottom of the phone. Check that the arrow on

the lead connector is facing towards the front of

the phone.

Ge t t in g S t a rt e d

Low Battery Indicator

When the battery is weak and only a few minutes of

talk time remain, the battery sensor informs you in the

2. Connect the adapter to a standard AC wall outlet.

When the battery is charging, the battery icon

in the top right-hand corner of the display fills

repeatedly.

following ways: an empty battery icon flashes (

you hear a warning tone and a message is repeated at

regular intervals on the display. When the battery

becomes too weak for the phone to operate, it

switches off automatically.

3. When charging is finished, disconnect the adapter

from the power outlet, and from the phone by

pressing the grey tabs on both sides of the

connector and pulling the connector out.

Ge t t in g S t a rt e d

Switching the Phone On/ Off

Note: The display language is determined by the SIM

card inserted. To change the language, use the

Language menu option; for further details, refer

to page 81.

1. Open the phone.

2. Hold down

until the phone switches on.

3. If the phone asks for a password, key in the

password and press the OK soft key. The

password is factory set to 0000. For further

details, see page 129.

5. When you wish to switch the phone off, hold

down

until the power-off animation is displayed.

Using the Ear-Microphone

4. If the phone asks for a PIN, key in the PIN and

press the OK soft key. For further details, see

page 130.

With the ear-microphone supplied with your phone, you

can make or answer a call without holding the phone.

When you connect the ear-microphone to the jack

above the volume keys, the button on the ear-

microphone will operate as listed below.

When the phone has registered with an approved

network provider, the idle screen, illustrated

below, is displayed on the main and external

displays.

To...

Then press the button...

Twice in idle mode.

Redial the last call

Answer a call

End a call

When you receive the call.

When you have finished the

call.

< Se rv ic e Pro v id e r>

Au g 1 4 We d

1 0 :2 9

We d 0 8 / 1 4

1 0 :2 9

Note: You can use the voice dialling or voice command

features by pressing the button, if the Active

Folder menu option is set to Voice Dial or Voice

Command. For further details, refer to page 84.

External display

Me n u

Ph o n e Bo o k

Main display

Ca ll Fu n c t io n s

Call Functions

Making a Call

Ending a Call

When the idle screen is displayed, key in the area

code and phone number and press

When you have finished your call, briefly press

Note: If you have set the Auto Redial option to ON

(see page 83) and the person called does not

answer or the line is busy, the number is

redialled automatically up to ten times.

Making a Call from the Phonebook

You can store the names and phone numbers called

regularly in the SIM card and phone memories,

which are jointly called the phonebook. You then do

not need to remember all your numbers; simply

select the required name to recall the associated

Making an International Call

1. Press and hold down

for the international

prefix. The + character appears.

number. For further details on the Phonebook feature,

refer to page 37.

2. Key in the country code, area code and phone

number and press

Voice Dialling

Correcting the Number

If you have set the Active Folder option to Voice

Dial (see page 84), your phone also allows you to

say a name when you open the phone. It then

automatically dials the number stored with that

name. For further details on the Voice Dialling

feature, refer to page 69.

To clear...

Then...

The last digit

displayed

Press the ❙ꢀsoft key.

Any other digit

in the number

Press

until the cursor

( ❘ ) is immediately to the right

of the digit to be cleared.

Press the ❙ꢀsoft key.

You can also insert a missing

digit simply by pressing the

appropriate key.

Redialling the Last Number

The phone stores the last 15 numbers dialled,

received or missed. To recall any of these numbers,

proceed as follows.

The whole display Hold down the ❙ꢀsoft key for

1. If there are any characters on the display,

more than one second.

press

to return to the idle mode.

Ca ll Fu n c t io n s

Answering a Call

2. Access the list of numbers by pressing

When somebody calls you, the phone rings and the

icon indicating the call is animated in the middle of

the screen. If the caller can be identified, the caller’s

phone number or name, if stored in your phonebook,

is displayed.

3. Use

to scroll through the list of

numbers until the required number is highlighted.

4. To dial the number, press

1. To answer a call, open the phone. If the phone is

already open, press

or the Accept soft key.

Adjusting the Volume

If the Any-key Answer menu option is set to ON,

you can press any key to answer a call, except

During a call, if you wish to adjust the earpiece

volume, use the volume keys on the left side of the

phone.

for

Note:To reject an incoming call, press the Reject

soft key or When the phone is closed,

and the Reject soft key (see page 82).

Press to increase and to decrease the volume.

hold down the volume key on the left side of

the phone.

2. End the call by closing the phone or pressing

Note: You can answer a call while using the

phonebook or menu features.

In idle mode with the phone open, you can adjust the

key volume using the same keys.

Ca ll Fu n c t io n s

Viewing Missed Calls

If you have a subscription that includes the Caller Line

Identification (CLI) feature and you are unable to

answer a call for any reason, you can find out who was

calling you and then call the person back, if necessary.

Editing a Missed Call Number

1. Press the Options soft key.

2. Press the Select soft key.

The number of missed calls is displayed on the idle

screen immediately after a call was missed.

3. Change the number as required. Press

to move back through the number.

To view the missed call immediately, proceed as

follows.

4. To...

Call the number

Then press...

1. If the phone is closed, open it.

Store the number

The Save soft key and enter

the name and location

required (for further details,

refer to page 37).

2. Press the View soft key.

The number corresponding to the most recent

missed call is displayed, if available.

Deleting a Missed Call

3. To...

Scroll through the

Then press...

1. Press the Options soft key.

2. Press or to highlight the Delete option.

3. Press the Select soft key.

missed calls

Call the number displayed

Edit or delete a missed

call number

The Options soft key

(see the following

paragraphs).

You can press

feature.

at any time to exit the Missed Call

Note: You can access the Missed Call feature at any

time by selecting the Missed Calls menu option;

for further details, see page 57.

Ca ll Fu n c t io n s

In-Call Options

Your phone provides a number of control functions

that you can use during a call. To access these

functions during a call, press the Options soft key.

Searching for a Number in the Phonebook

You can search for a number in the phonebook during

a call.

Switching the Microphone Off (Mute)

1. Press the Options soft key.

You can temporarily switch your phone’s microphone

off, so that the other party cannot hear you.

2. Press

option.

to highlight the PhoneBook

Example: You wish to say something to another

person in the room but do not want the

calling party to hear you.

3. Press the OK soft key.

4. Enter the first few letters of the name that you

want to find and press the Find soft key.

To switch the microphone off temporarily, proceed as

follows.

Note: You can also scroll through the phonebook

from the beginning, by pressing the Find

soft key directly.

1. Press the Options soft key.

2. Press

to highlight the Mute option.

The phonebook entries are listed, starting with

the first entry matching your input. This entry is

also highlighted.

3. Press the OK soft key.

Your correspondent can no longer hear you.

5. To review the highlighted entry, press the View

To switch the microphone back on, proceed as

follows.

soft key.

For a more detailed description of the Phonebook

feature, refer to page 37.

1. Press the Options soft key.

2. Press

option.

to highlight the Unmute

3. Press the OK soft key.

Your correspondent can hear you again.

Ca ll Fu n c t io n s

Putting a Call on Hold

Answering a Second Call

You can place the current call on hold whenever you

want. You can make another call while you have a

call in progress if this service is supported by the

network. Of these two calls, one is active and the

other is on hold and you can swap between the calls.

You can answer an incoming call while you have a

call in progress, if this service is supported by the

network and if you have activated the Call Waiting

menu option; see page 91. You will be notified of an

incoming call by a call waiting tone.

To place a call on hold, press the Options soft key,

and select the Hold option. You can reactivate the

call whenever you want, by pressing the Retrieve

soft key.

To answer a call while you have a call in progress,

proceed as follows.

1. Press

to answer the incoming call.

The first call is automatically put on hold.

To make a call while you have a call in progress,

proceed as follows.

2. To switch between the two calls, press the Swap

1. Key in the phone number that you wish to dial or

look it up in the phonebook.

soft key.

To end a held call, press the Options soft key and

select the End held option.

2. Press

to dial the second call.

The first call is automatically put on hold.

3. To end the current call, press

Or alternatively, proceed as follows.

Any held calls will automatically be reconnected

to you.

1. Put the current call on hold by pressing the

Options soft key and selecting the Hold option.

2. Make the second call in the normal way.

To swap between the two calls, simply press the

Swap soft key.

The current call is placed on hold and the call on

hold is reactivated so that you can continue

conversing with the other party.

When you have finished, end each call normally by

pressing

Ca ll Fu n c t io n s

Making a Multiparty Call

2. Highlight the required person, by pressing

or , and then press

A multiparty call is a network service that allows

up to six people to take part simultaneously in a

multiparty or conference call. For more information,

contact your service provider.

3. Select Private.

Now you can talk privately with that person. The

other participants can continue to converse with

each other.

Setting Up the Multiparty Call

1. Call the first participant in the normal way.

4. To return to the multiparty call, press the Options

soft key and select Join.

2. Call the second participant in the normal way.

The first call is automatically put on hold.

All the multiparty call participants can now hear

each other.

3. To join the first participant to the multiparty call,

press the Options soft key and select the Join

option.

Dropping One Participant

1. Press the Options soft key and choose the

Select One option.

4. To add a new person to the multiparty call, call

the person in the normal way. Then press the

Options soft key and select the Join option.

The list of call participants appears.

2. Highlight the required person, by pressing

You can add incoming callers by answering the call,

pressing Options and selecting the Join option.

Repeat as required.

, followed by

3. Select Remove.

The call is ended with that participant, but you

can continue to talk with the other participants.

Having a Private Conversation With One

Participant

4. End the multiparty call by closing the phone or

1. Press the Options soft key and choose the

Select One option.

pressing

The list of call participants appears.

Ca ll Fu n c t io n s

Phonebook

You can store phone numbers and the corresponding

names in the memory of your SIM card. In addition,

you can store up to 500 numbers and names in the

phone memory. The SIM card and phone memories,

although physically separate, are used as if they were

a single entity, called the phonebook.

Muting/ Sending Key Tones

These options allow you to turn the key tones off or

on. If the Mute keys option is selected, your phone

does not transmit the key tones.

Note: If you change phones, any numbers stored in

your SIM card are automatically available with

the new phone, whereas any numbers stored

in the phone must be stored again.

Note: To communicate with answering machines or

computerised telephony systems, the Send

keys option must be selected.

Storing a Phone Number with a Name

Using the SMS Service

As soon as you start to enter a number, Save appears

above the left soft key to allow you to store the

number in the phonebook.

If you receive an SMS (Short Message Service)

message during a call, the message icon (

flashes in the display.

)

1. Key in the number to be stored.

Notes:

Either during your call or after you have finished it,

you can read the message or send a reply; refer to

page 60 for further details.

• If you make a mistake while entering a number,

correct it using the ❙ soft key. For further

details, refer to page 24.

• To insert a dialling pause for special phone

services, such as banking by phone, hold

down

. “P” is displayed to indicate the pause.

2. When you are sure that the number is correct,

press the Save soft key.

3. Enter the associated name.

The maximum length of a name depends on your

SIM card. For information on how to enter

characters, see page 44.

4. When you are satisfied, press the Save soft key.

The phone now displays the first free location in

the SIM card for you to save the number and

name.

P h o n e b o o k

If the card memory is full, the first free location in

the phone memory is displayed.

The following options are available.

Voice Record

5. Press the right soft key to toggle between the phone

Note: This option appears only when no name has

(To Phone) and card (To Card) memories.

been recorded.

6. If you do not want to save the number and name in

This option allows you to add a voice tag to the

number.

the suggested location, press

location number and enter your preferred location by

pressing the number keys.

to clear the

Follow the instructions given by your phone to record

the required name.

7. Press the OK soft key to store the name and number.

8. You can access the phonebook options by pressing

the Options soft key, or scroll through the memory

Play Voice

Note: This option appears only when you have

with

already recorded some names.

To exit, press

This option plays back the names that you have

recorded.

Using the Phonebook Options

Voice Delete

Note: This option appears only when you have

When storing or viewing a number in the phonebook,

Options appears above the left soft key to allow you to

access the phonebook options, described in the

following paragraphs.

already recorded some names.

This option allows you to delete a specific voice

entry.

You are asked to confirm the deletion by pressing the

OK soft key.

Accessing the Options

To access the various phonebook options, proceed as

follows.

Paste

This option allows you to paste the phonebook

number into the normal dialling mode. Use this

option to dial a number similar to one in the

phonebook (a different extension in the same office,

for example).

1. Press the Options soft key.

The first available option is highlighted.

2. Scroll to the required option by pressing

Use the ❙ꢀsoft key to change the number as

required; refer to page 24 for further details. When

3. Press the Select soft key.

you are ready to dial, press

P h o n e b o o k

PPhhoonnee bBooookk

Edit

Colour

This option allows you to edit a number and name

stored in the phonebook.

This option allows you to assign a specific service light

colour to a number and thus distinguish the caller by

the service light colour.

Four colours are available (normal, orange, violet and

blue) and they can be assigned to up to twenty numbers.

If no specific colour is assigned, the service light

flashes with the colour you set in the Service Colour

option; see page 99.

Erase

This option allows you to erase a number and name

stored in the phonebook. You are asked to confirm

that you wish to erase the name and number from

the phonebook by pressing the Yes soft key.

Copy

Speed-Dialling by SIM Memory Location

This option allows you to copy a phonebook number

to another location. Use this option to store a

number similar to one already in memory; once

copied, edit the number and store it into another

location on the SIM card or in the phone memory.

Once you have stored phone numbers in the SIM card,

you can dial them easily whenever required.

To speed-dial a number, proceed as follows.

Memory Status

To speed-dial a

Then...

number in locations...

This option allows you to check how many names

and phone numbers are stored and how many

locations are still free in the card and phone

memories.

2 to 9

Press and hold down the

appropriate key.

10 and above

Press the appropriate keys,

Alert

followed by

This option allows you to assign specific ring tones

to up to twenty numbers and thus distinguish the

caller by the ring tone.

When the display shows the

name, phone number and

location, press the Dial soft

key.

Note: Memory location 1 is reserved for your Voice

Mail server number.

P h o n e b o o k

Dialling a Number Using the Service

Directory or Information Numbers

Searching for and Dialling a Number in

the Phonebook

Note: The Service Dir. and Information Numbers

options may not be available, depending on

your SIM card.

1. When the idle screen is displayed, press the

PhoneBook soft key.

2. If your SIM card provides Service Dialling Number

(SDN) and Information Number services, press the

OKsoft key when the Find Entry option is

highlighted.

When the idle screen is displayed, press the

PhoneBook soft key, then you can select one of the

services.

3. Enter the start of the name that you wish to find

Service Dir.: enables you to view the Service

Directory and make calls from it.

and press the Find soft key.

Note: You can also scroll through the phonebook

from the beginning, by pressing the Find soft

key directly.

Information Numbers: enables you to see the

Information Numbers in a tree structure and make

a call.

The phonebook entries are listed, starting with the

first entry matching your input. This entry is also

highlighted.

4. To...

View the

Then press...

The View soft key.

highlighted entry

Select a

one or

different entry

more times until the required

entry is highlighted.

Look for a name

starting with a

different letter

The key labelled with the

required letter.

5. Once you have found the required entry, press

to dial the number.

En t e rin g Te xt

Entering Text

Changing the Text Input Mode

When storing a name in the phonebook, creating your

personal greeting or scheduling events in your calendar,

you will need to enter text.

When you are in a field that allows characters to be

entered, you will see the text input mode indicator at

the bottom of the display.

You are provided with the following text input modes.

To change to another text input mode, proceed as

follows.

T9 Mode

This mode allows you to enter words with only one

keystroke per letter. Each key on the keypad has more

than one letter – when you press

1. Press the right soft key, indicating the current text

input mode.

once, J, K or L

may be displayed. The T9 mode automatically compares

your keystrokes with an internal linguistic dictionary to

determine the correct word, thus requiring far fewer

keystrokes than the traditional ABC mode.

2. Scroll to the required mode, by pressing

Note: If you want to exit the menu without

changing the mode, press the

soft key.

ABC Mode

This mode allows you to enter letters by pressing the

key labelled with the required letter once, twice, three

or four times until the letter is displayed.

3. Press the Select soft key to select the highlighted

text input mode.

The selected text input mode is indicated on the

bottom line of the display.

Number Mode

This mode allows you to enter numbers.

Symbolic Mode

This mode allows you to enter special characters.

is a registered trademark of Tegic Communications, Inc. and

is licensed under U.S. Patent 5,818,437/5,953,541/

6,011,554.

En t e rin g Te xt

Using the T9 Mode

Smart Punctuation

To type a word, proceed as follows.

To enter periods, hyphens or apostrophes, press

The T9 mode applies rules of grammar to insert the

correct punctuation.

1. Start entering the word by pressing keys

. Press each key only once for each letter.

Example: The

key is used twice to display two

Example: To enter Hello in the T9 mode, press

and

punctuation marks.

The word you are typing appears in the display. It

may change with each key that you press.

‘

2. Enter the whole word before editing or deleting

any keystrokes.

Changing the Case

To change the case of the next letter(s) that you type,

press . There are three case states:

• Lower Case

• Initial Capitals

• Capital Lock

3. If the word is correct, start entering the next word.

Otherwise, press

repeatedly to display other

word choices for the keys that you have pressed.

Example: Both “of” and “me” have the sequence

and

. The phone displays the

Scrolling

most commonly used choice first.

• To move the cursor to the left or right within the

4. Complete each word with a space by pressing

text, press

• To scroll through other word choices for the keys

you have entered, press

To type words not found in the T9 mode, change the

text input mode to the ABC mode.

Clearing Letters and Words

To clear letters to the left of the cursor, press

one or more times. To erase entire words, hold

down

En t e rin g Te xt

Using the ABC Mode

The cursor moves to the right when you press a

different key. When entering the same letter twice or

a different letter on the same key, just wait a few

seconds for the cursor to move right automatically,

and then enter the next letter.

When typing in the ABC mode, press the key labelled

with the required letter:

• Once for the first letter

• Twice for the second letter

• And so on

Changing the Case

Example: To display the letter “C”, quickly press

three times. To display the letter “K”,

To change the case of the next letter(s) that you type,

press

twice. This method is called

press

. There are three case states:

Multi-tap typing.

• Lower Case

• Initial Capitals

• Capital Lock

Refer to the table below for more information on the

characters available.

Inserting a Space

Key

Characters in the Order Displayed

To insert a space between each word, press

Upper Case

Lower Case

;

¿ ¡ 1 = “ /

? ! 1 -

‘

@ :

A B C 2 Ä Æ Å Γ

D E F 3 É ∆

G H I 4 Θ

a b c 2 à ä æ å Ç

Scrolling

d e f 3 é

To move the cursor to the left or right within the text,

press or

g h i 4 ì

J K L 5 Λ

k l

M N O 6 Ñ Ö Ø Ξ

P Q R S 7 Π Σ

T U V 8 Ü Φ

WX Y Z 9 Ψ Ω

0 x < > % # £

m n o 6 ñ ò ö ø

p q r s 7 ß

Clearing Letters and Words

u v 8 ù ü

w x y z 9

0 + ( & _ $

To clear letters to the left of the cursor, press

one or more times. To erase entire words, hold

)

down

En t e rin g Te xt

Selecting Functions

and Options

Using the Number Mode

Your phone offers a set of functions that allow

you to customise your phone. These functions are

arranged in menus and sub-menus, accessed via the

two soft keys marked and . Each menu and sub-

menu allows you to view and alter the settings of a

particular function.

The Number mode enables you to enter numbers.

Press the keys corresponding to the required digits

before manually switching back to the appropriate text

input mode.

The roles of the soft keys vary according to the current

context; the label on the bottom line of the display just

above each key indicates its current role.

Using the Symbolic Mode

The Symbolic mode enables you to insert symbols in a

text message.

Example:

To...

Then press ...

Display more symbols

Enter a given symbol

Au g 1 4 We d

1 0 :2 9

The corresponding key.

The phone automatically switches back to the text

input mode used immediately prior to selecting the

Symbolic mode.

Me n u Pho ne Bo o k

Press the left soft key

to access the menu

functions.

Press the right soft

key to access the

Phonebook feature.

S e le c t in g Fu n c t io n s a n d Op t io n s

Using the Menus

To view the various functions/options available and

select the one required, proceed as follows.

The phone offers a range of functions that allow you

to tailor the phone to your needs. These functions are

arranged in menus and sub-menus.

1. Press the appropriate soft key.

The menus and sub-menus can be accessed by

scrolling with the navigation keys.

2. To...

Select the:

Then press...

1. In idle mode, press the Menu soft key to access

The left soft key.

the menu facility. Scroll with

to reach

• Function displayed

the required main menu, such as Tones.

• Option highlighted

2. If the menu contains any sub-menus, Ring Tone

for example, find the one you want by scrolling

View the next function

or highlight the next

option in a list

with

. Press the Select soft key to

enter the sub-menu.

If the menu you have selected contains further

options, repeat this step.

Move back to the

previous function

or option in a list

3. To...

Scroll through the menus

Confirm the chosen setting The Select soft key.

Then press...

Move back up one

level in the structure

The right soft key.

Exit the structure

without changing

the settings

Return to the previous

menu level

The soft key.

In some functions, you may be asked for a password

or PIN. Enter the required code and press

Exit the menu, without

changing the settings

Us in g t h e Me n u s

Menu Structure

Main Menu

Level 1

Level 2

3. Voice Functions

1. Voice Dial

1. Record

2. Act

The various menus let you check or change your phone

settings. The following illustration shows the menu

structure.The numbers assigned to each menu option may

not match the menu number on the phone. It depends on

the services supported by the SIM.

3. Delete One

4. Play All

5. Delete All

1. Record

2. Act

3. Play All

4. Delete All

1. Record

2. Replay

3. Delete One

4. Delete All

2. Voice Command

3. Voice Memo

Note: You can only see menu 0, if your SIM card

supports the SIM Application Toolkit. This is a

network feature. Please contact your service

provider for more information.

4. Tones

1. Ring Tone

2. Melody Composer

3. Ring Volume

4. Alert Type

5. Keypad Tone

6. Message Tone

7. Power On/Off

8. Error Tone

Main Menu

1. Call Records

Level 1

Level 2

1. Missed Calls

2. Received Calls

3. Dialled Calls

4. Call Time

1. Last Call Time

2. Total Sent

3. Total Received

4. Reset Timers

1. Last Call Cost

2. Total Cost

9. Minute Minder

10. Connect Tone

5. Call Cost

5. Settings

1. Phone Settings

1. Greeting Message

2. Own Number

3. Language

3. Max Cost

4. Reset Counters

5. Set Max Cost

6. Price/Unit

4. Any-key Answer

5. Backlight

6. Service Light

7. Auto Redial

8. Auto Answer

9. Caller ID

2. Messages

1. Voice Mail

1. Connect to Voice Mail

2. Voice Server Number

2. Read Messages

3. Write Messages

4. Preset Message List

5. Setup

10. Active Folder

11. Reset Settings

12. Active Line

1. Call Diverting

2. Call Barring

3. Call Waiting

1. Service Centre

2. Default Type

3. Default Validity

4. Reply Path

5. Delivery Report

1. Read

2. Network Services

4. Network Selection

5. Line Identification

6. Closed User Group

6. Broadcast

2. Receive

3. Channel List

4. Language

Shown only if supported by your SIM card.

7. Picture Messages

May not be shown or supported by your network service provider.

Us in g t h e Me n u s

Main Menu

Level 1

Level 2

5. Settings

(continued)

3. Security Settings

1. PIN Check

2. Change PIN

3. Phone Lock

4. Change Password

5. SIM Lock

6. FDN Mode

7. Change PIN2

4. LCD/LED Settings

5. Browser Settings

1. Wallpaper

2. Main Menu

3. Skin

4. LCD Brightness

5. Service Colour

6. Graphic Logo

1. Proxy Settings

2. Current Proxy

6. Organiser

1. Scheduler

2. Alarm

1. Daily Alarm

2. Once Alarm

3. Weekly Alarm

4. Alarm Tone

3. Calculator

4. To Do List

5. Calendar

6. World Time

7. Clock

1. Set Time

2. Set Date

3. Format

8. Conversion

1. Length

2. Weight

3. Volume

4. Area

5. Temperature

9. Timer

10. Stopwatch

7. Games

1. Bowling

2. Speed Up

3. Honey Ball

8. WWW Services

1. Home

2. Bookmark

3. Goto

Shown only if supported by your SIM card.

May not be shown or supported by your network service provider.

Call Records

Via this menu, you can view:

• Missed calls

• Received calls

• Dialled calls

The number and name (if available) are displayed

together with the date and time at which the call

was made. You can also view call times and costs.

Missed Calls

Menu 1-1

This option lets you view the last 15 unanswered

calls. You can also:

• Edit the number if available and dial it or save it

in the phonebook

• Delete the call from the list

Received Calls

Menu 1-2

This option lets you view the last 15 phone calls

received. You can also:

• Edit the number if available and dial it or save it

in the phonebook

• Delete the call from the list

Ca ll Re c o rd s

Dialled Calls

Menu 1-3

Call Cost

Menu 1-5

This option lets you view the last 15 numbers dialled.

You can also:

This network feature lets you view the cost of calls.

The following options are available.

• Edit the number and save it in the phonebook

• Redial the number

Last Call Cost: cost of the last call made.

• Delete the number from the list

Total Cost: total cost of all calls made since the cost

counter was last reset. If the total cost exceeds the

maximum cost set via the Set Max Cost option, you

can no longer make any calls, except calls to the

emergency services, until you reset the counter.

Call Time

Menu 1-4

This option lets you view the timers for calls made

and received. The following timers are available.

Max Cost: maximum cost set via the Set Max Cost

option (see below).

Last Call Time: length of the last call.

Reset Counters: option used to reset the cost

counter; you must first enter your PIN2 (see page 130)

and then press the OK soft key.

Total Sent: total length of all calls made since the

timer was last reset.

Set Max Cost: option used to enter the maximum

cost that you authorise for your calls; you must first

enter your PIN2 (see page 130) and then press the OK

soft key.

Total Received: total length of all calls received

since the timer was last reset.

You can use the Reset Timers option to reset the

call timers; you must first enter the phone password

(see page 129) and then press the OK soft key.

Price/Unit: option used to set the cost of one unit;

this price per unit is applied when calculating the cost

of your calls; you must first enter your PIN2 (see

page 130) and then press the OK soft key.

Note: The actual time invoiced for calls by your

service provider may vary, depending on

network features, rounding-off for billing

purposes, and so forth.

Me s s a g e s

Messages

Your phone receives voice mail notification messages,

and Short Message Service (SMS) text messages. Voice

mail and SMS are network services. Please contact your

service provider for more information.

You can then select this option and simply press the

OK soft key to listen to your messages.

Note: If you press and hold down

when the phone

is in idle mode, you can access your voice mail

server directly, provided that the number has

already been set via the Voice Server Number

menu option.

When the

mail. When the

icon appears, you have received voice

icon appears, you have received

new text messages. If the message memory is full, an

error message is displayed and you cannot receive any

new messages. Use the Delete option in the Read

Messages menu to delete obsolete messages. Once

there is space in the memory, any undelivered SMS

messages will be received (provided sufficient space is

available).

Voice Server Number

You can change the voice mail server number.

Note: Some networks do not allow the user to change

this setting.

Note: If your SIM card supports the ALS feature and

you receive voice mail, one of the holes in the

To...

Then press...

Enter the server

number

The corresponding number

keys.

tape symbol

concerned.

is filled in to indicate the line

(

)

Recall a number in

the phonebook

The PhoneBook soft key.

Picture and ring tone messages can also be received.

To...

Then use the...

Correct a digit

The ❙ soft key or

Send or receive

picture messages

Picture Messages menu

option; see page 67.

Move the cursor to the

left/right without clearing

the digit

Load ring

tone messages

Ring Tone menu option;

see page 74.

Note: See page 37 for instructions on how to use the

phonebook.

Voice Mail

Menu 2-1

Read Messages

Menu 2-2

This menu provides you with a quick way of accessing

your voice mailbox (if provided by your network).

When the Read Messages menu is selected, the

header of the first message is displayed. This contains

the:

• Message number

• Message status (new, old, not sent, sent)

Connect to Voice Mail

Before using this feature, you must enter the voice

server number obtained from your service provider (see

the following page).

Me s s a g e s

Write Messages

Menu 2-3

To view this message, press the View soft key. The

screen shows the:

• Sender’s phone number (if sent with the message)

• Date and time at which the message was

received

Via this menu, you can write and edit text messages

of up to 160 characters.

• Message text

1. Key in a message. For details on how to enter

text, refer to page 44.

To scroll through the messages, press

You can choose the following options, by pressing

the Options soft key.

2. After you complete the message, you can select

the following options.

Text Reply: allows you to reply by sending a text

message. You can also:

• Change the SMS centre number (if required)

• Send the message

Send Only: allows you to send the message

immediately. You can enter the required

destination.

Save and Send: allows you to save a copy of the

message and then send the message to the

required destination. You can read the message

using the Read Messages option. When you

read the message, ‘Sent’ is displayed to indicate

the message state.

• Save and send the message

• Save but not send the message

Call back: allows you to call the sender back.

Edit: allows you to edit a message.

Save Only: allows you to save the message so

that it can be sent later. When you read the

message, ‘Not sent’ is displayed.

Delete: allows you to delete obsolete messages.

Cut Number: allows you to extract a number from

the message text, so that you can call the number or

save it in the phonebook.

3. After selecting the required option, press the

Select soft key.

Send: allows you to send a message that you have

not already sent.

The display prompts you to enter the destination

number.

Send again: allows you to resend a message that

you have already sent.

4. Enter the phone number and press the OK soft

key or press the PhoneBook soft key to select

the number from the phonebook.

Note: The options available vary, depending on the

message status (new, old, not sent, sent).

Me s s a g e s

Preset Message List

Menu 2-4

Default Type: allows you to set the default message

type (Text, Voice, Fax, X400, Email and ERMES). The

network can convert the message into the selected

format (possibly on a subscription basis).

Using this menu, you can preset up to five messages

that you use most frequently. When you access this

menu, the preset message list is displayed. Scroll

through the list using

. When the

required message number appears, press the

Default Validity: allows you to set the length of

time for which your text messages will be stored at

the message centre while attempts are made to

deliver them.

Possible values are one hour, 6 hours, 24 hours, one

week and the maximum authorised by your service

provider.

Options soft key.

The following options are available.

Edit: allows you to write a new message or edit the

selected preset message.

Note: For further information on how to enter

characters, refer to page 44.

Reply Path: allows the recipient of your SMS

message to send you a reply via your message

centre, if the service is provided by the network.

Send Message: allows you to recall the selected

preset message. Once you have completed the

message, you can send, save and send, or simply save

it. For details on how to send a message, see page 63.

Delivery Report: allows you to activate or

deactivate the report function. When this function is

activated, the network informs you whether or not

your message has been delivered.

Delete: allows you to delete the selected preset

message.

Setup

Menu 2-5

Broadcast

Menu 2-6

Via this menu, you can set up default SMS

information.

This network service allows you to receive text

messages on various topics, such as the weather or

traffic. Messages are displayed immediately they are

received, provided that:

Service Centre: allows you to store or change the

number of your SMS centre required when sending

messages. You must obtain this number from your

service provider.

•

The phone is in the idle mode

The Receive option is set to Enable

The message channel is currently active in the

channel list

Me s s a g e s

Picture Messages

Menu 2-7

If the message is long, press the down volume key

on the left side of the phone one or more times.

The phone allows you to send and receive text

messages that contain pictures. These messages are

called “picture messages”, several of which are

preset in the phone and can be replaced with new

ones received from other sources.

The last five messages are also stored for later

retrieval. Please contact your service provider for

more information.

The following options are available.

Write Message: allows you to write text to send

with the picture message.

Read: allows you to view the first message. Scroll

through the message using

of the message, press the Next soft key to move to

the next message.

. At the end

Delete: deletes the picture message; Empty is

displayed instead of the title.

Send Message: allows you to enter the destination

phone number; you must then press the OKsoft key

to send the picture message.

Receive: allows you to turn the reception of

broadcast messages on or off.

Cut Number: allows you to extract a number from

the picture message, so that you can call the number

or save it in the phonebook.

Channel List: lists all available channels. The

channels currently selected are indicated by an

asterisk ( ) beside the name. When you select one of

them, you can edit, enable, disable or delete the

channel.

Receiving a Picture Message

The Enter Channel option allows you to add a new

channel to the channel list. Enter the appropriate

channel ID obtained from your service provider, and a

title for the channel.

To view a message immediately you receive it, press

the View soft key. Press the right soft key to toggle

between viewing the message and the image.

Language: allows you to select your preferred

language to be used when displaying cell broadcast

messages.

Me s s a g e s

The following options are available.

Save: allows you to save the picture message in your

picture message list.

Discard: allows you to discard the picture message

without saving it.

Cut Number: allows you to extract a number from the

picture message, so that you can call the number or

save it in the phonebook.

Note: This function is available between phones

supporting Nokia’s* Smart Messaging services.

Each picture message is made up of several text

messages; it may, therefore, cost you more to

send one picture message than one text

message.

Picture messages are stored in the phone; you

cannot, therefore, view them if you use your SIM

card in another phone.

^*Nokia is a registered trademark of Nokia Corporation.

Voice Functions

In the Voice Functions menu, you can use voice

features, such as:

• Voice dial

• Voice command

• Voice memo

Voice Dial

Menu 3-1

The voice dialling feature allows you to make phone

calls by saying a voice tag that has been added to a

name and phone number in the phonebook. Any

spoken word, such as a name, can be a voice tag.

When recording a voice dial tag, note that:

• Voice tags are not language-dependent. They are

dependent on the speaker’s voice.

• Voice tags are sensitive to background noise. Where

possible, record voice tags or make calls in a quiet

environment.

• When recording a voice tag or making a call, hold

the phone in the normal position close to your ear.

• The maximum length for a voice tag recording is

about 1.5 seconds, but very short names are not

recorded.

• You can record up to twenty voice-dial entries.

Vo ic e Fu n c t io n s

Record: allows you to record name tags and allocate

them to numbers for voice dialling.

Delete One: allows you to delete an individual voice

tag. The corresponding phone number remains in the

phonebook but the voice tag is deleted.

1. Say the name you want to use for voice dialling

after you hear a voice prompt. For best results, use

names with at least two syllables, or use both a

first and last name. The phone stores the name as

the first sample, and then prompts you to say the

name again.

If the name displayed is... Then press...

To be deleted

The OK soft key.

Not to be deleted

The next name is

displayed.

2. Respond to the prompt by repeating the name.

The phone stores the name as the second sample

and then requests the phone number and name.

To exit the Delete One option, press the

key.

soft

3. To store the number, press the OKsoft key. Follow

the instructions described on page 37 to store the

number in your phonebook.

Play All: allows you to play back all recorded voice

tags.

Delete All: allows you to delete all voice tags. The

corresponding phone numbers remain in the

phonebook but the voice tags are all deleted. Press

the OK soft key when the message “Delete All

Confirm?” is displayed.

Act: allows you to activate voice dialling.

You hear a voice prompt and Say Name is

displayed. Say the voice tag clearly. The phone

automatically dials the number of the recognised

voice tag. If no match is found for the voice tag or

the tag is not recognised, the phone may ask you to

try again.

Otherwise, press the Cancel soft key to exit the

function without deleting the voice tags.

Note: This option is only available once you have

recorded and stored voice tags.

Vo ic e Fu n c t io n s

Voice Command

Menu 3-2

This menu gives you quick access to menus you use

frequently, by saying your own voice commands.

The following options are available.

Record: allows you to record a memo. The screen

displays the:

• Memo location

The following options are available.

• Date and time when the memo was recorded

• Recording time counter

Record: the most frequently used menu functions

are programmable with your own voice commands.

The menus are preset to OFF by default, indicating

that they are not recorded. When voice commands

are recorded successfully, the menus are changed to

ON in the display.

The maximum recording time is about 35 seconds.

If you want to record for longer, press the Continue

soft key. Split appears instead of Continue. You can

continue recording and the rest of the memo is

stored in the next memo location.

Act: allows you to access the menus using the

recorded voice commands.

To stop recording, press the Stop soft key.

Note: If all memo locations are full, you must delete

Play All: plays back all voice commands you have

recorded.

an old memo before recording a new one.

Replay: allows you to play back all memos recorded,

starting with the most recent memo. The screen

displays the:

Delete All: deletes all commands you have

recorded.

• Memo location

• Date and time when the memo was recorded

Voice Memo

Menu 3-3

To skip to the next memo, press the Skip soft key. To

stop the playback, press the Stop soft key.

You can use the Voice Memo feature to:

• Record up to three voice memos

• Play the recorded voice memos

• Delete one or all voice memos

Delete One: allows you to delete a specific memo.

All memos recorded are played back, starting with

the most recent one.

Delete All: allows you to delete all memos. Press

the OK soft key when the message “Delete All

Confirm?” is displayed.

To n e s

Tones

When you receive a ring tone message, proceed as

follows.

You can use the Tones menu to customise various

sound settings, such as the:

• Ring tone, volume and type for incoming calls or

messages

• Sounds made when your call is connected, you

press a key, make a mistake or you switch your

phone on/off.

1. To listen to the tone, press the Play soft key.

2. To save the ring tone, press the Save soft key.

3. Select the location in which you wish to save the

ring tone and press the OKsoft key.

4. To use this tone as the current ring tone, press the

Yes soft key. Otherwise, press the No soft key.

• Composing ring tones (User 1~2)

With this method, you can select one of two ring

tones composed with the Melody Composer menu

option.

Ring Tone

Menu 4-1

This option allows you to set the ring tone for incoming

calls or messages.

• Downloading 40 poly ring tones from other sources

(Empty)

With this method, you can download 12 of the ring

tones from sources, such as PCLink in the content

download kit or a WAP site.

Note: If your SIM card supports the ALS feature, this

option also allows you to select a different ring

tone for each line.

Note: While downloading ring tones, if the battery is

detached from the phone, you may lose the

downloaded ring tones.

The following options are available.

Melody: lets you choose between many different

melodies. Each time you select a melody from the list,

the melody is played.

Melody Composer

Menu 4-2

Bell: lets you choose between many different bells.

Each time you select a bell from the list, the bell rings.

This menu allows you to compose your own,

customised ring tone.

• Three octaves are available.

• A maximum of 100 notes can be entered.

• You can adjust the length of the notes and add

My Music Box: lets you choose between

17 changeable ring tones; see below for further details.

rests, as required.

• Downloading mono-poly ring tones (Download 1~3)

With this method, you can select one of three ring

tones extracted from a Nokia-compatible ring tone

message. For details about this network service,

contact your service provider.

Composing a Melody

You can compose two melodies.

1. When you access the menu, the names of any

melodies created are displayed. Otherwise, (Empty)

appears. Select the melody that you wish to

create or edit.

To n e s

2. Press the Select soft key and compose your melody

using the following keys.

5. To use the melody as the ring tone, press the Yes

soft key.

The melody is saved and is played each time your

phone rings.

To...

Then press...

Enter C, the first note

in the musical scale

Deleting a Melody

Enter D

Enter E

Enter F

Enter G

Enter A

Enter B

1. Select the melody that you wish to delete.

2. Hold down

for a few seconds.

All notes are erased.

3. Press the Listen soft key. You are asked to

confirm that you wish to delete the melody by

pressing the Yes soft key.

Move a note up or

down one octave

Enter a rest

Ring Volume

Menu 4-3

until the rest is of the

required length.

This option allows you to adjust the ring volume to

one of five levels. Use the volume keys on the left

Delete notes

side of the phone or

the greater the volume.

. The more bars you see,

Move a note a

semitone up or down

(for example,

the note A changes to A#, B,

C, C#, and so on each time

you press

Alert Type

Menu 4-4

Add # to a note or not

Change the length

of a note

Listen to your melody The Listen soft key.

Cancel your changes

(the length changes

each time you press the key)

This option allows you to indicate how you are to be

informed of any incoming calls. The following options

are available.

Light Only: only the backlight is switched on; the

phone neither rings nor vibrates.

3. When you are satisfied with your melody, press the

Melody: the phone rings using the tone selected via

the Ring Tone menu option.

Yes soft key.

Vibration: the phone vibrates but does not ring.

4. Enter a title for the melody.

Vibra+Melody: the phone first vibrates three times

and then starts ringing.

Note: For further details on how to enter characters,

refer to page 44.

Note: To toggle between the current alert type and

You are asked if the melody is to become the ring tone.

the Silent mode, hold down

To n e s

The following options are available.

Keypad Tone

Menu 4-5

OFF: when you switch the phone on and off, you do not

hear a jingle.

This option allows you to select the tone that the

keypad generates when you press a key. The following

options are available.

Classical: when you switch the phone on and off, you

hear the default jingle.

OFF: the keys do not generate any sound.

Cheerful: when you switch the phone on and off, you

hear a cheerful jingle.

Cool: each key from

generates a pure sound only in the idle mode.

, when pressed,

Piano: each key from , when pressed,

generates a different note in the musical scale only in

the idle mode.

Error Tone

Menu 4-8

This option allows you to select how the phone informs

you that you have made a mistake. The following

options are available.

Tone: each key, when pressed, generates a different

sound.

Beep: each key, when pressed, generates the same

sound.

OFF: the phone does not beep.

ON: the phone beeps to indicate an invalid entry.

Message Tone

Menu 4-6

Minute Minder

Menu 4-9

This option allows you to indicate how you are to be

informed that you have received a new message. The

following options are available.

This option allows you to specify whether the phone

must beep every minute during an outgoing call to keep

you informed of the length of your call. The following

options are available.

Single Beep: the phone beeps once.

SMS Tone1 ~ SMS Tone5: the phone rings using the

selected SMS tone.

OFF: the phone does not beep.

ON: the phone beeps every minute.

Light Only: the service light on the top of the phone

flashes.

Connect Tone

Menu 4-10

Vibration: the phone vibrates but does not ring.

This option allows you to specify whether the phone

should beep when the phone connects to the network.

The following options are available.

Power On/ Off

Menu 4-7

This option allows you to select the tone that you will

hear when you switch your phone on or off.

OFF: the phone does not beep.

ON: the phone beeps when your call is accepted.

S e t t in g s

Settings

Own Number

Many different features of your phone can be

customised to suit your preferences. All of these

features are accessed via the Settings menu.

Note: The contents of this menu may vary, depending

on the SIM card.

You can enter your own name and number using this

menu. If you have subscribed to the Alternate Line

Phone Settings

Menu 5-1

Service (ALS), you can select a line with

Greeting Message

The following options are available.

This option allows you to set a greeting message to

be displayed briefly when the phone is switched on.

When you select this option, the current message is

displayed.

Erase: allows you to erase the name and number.

Edit: allows you to edit the name and number. If your

SIM card supports the ALS service, only the Edit soft

key is displayed. Press the Edit soft key and enter or

edit your own name for the ALS line.

To...

Then press...

Clear the existing message

and hold it

down until the message

is cleared.

Language

You can select a different language for the display

and voice functions.

Enter a new message

The appropriate

alphanumeric keys.

Cancel your input and

return to the previous menu

You can also set the default text input mode. For

details on the text input modes, refer to page 44.

For more information on entering characters, refer to

page 44.

S e t t in g s

Any-key Answer

Service Light

Depending on the setting of the Any-key Answer

option, you can answer an incoming call by pressing

This option allows you to select whether the service

light on the top of the phone is used or not. The

following options are available.

any key, except

and the Reject soft key.

To reject a call when Then press the...

the phone is...

ON: the service light flashes when the phone is

ready for use.

Open

Reject soft key or

OFF: the service light is not used.

Closed

Volume keys on the left side

of the phone.

Note: Hold this key down if

the Any-key Answer

option is set to OFF.

Auto Redial

With the Auto Redial function, the phone makes up

to ten attempts to redial a phone number after an

unsuccessful call.

ON: you can press any key, except

and the

Reject soft key.

Note: The interval between two call attempts varies.

OFF: you can only press

or the Accept soft key.

The following options are available.

ON: the number is redialled automatically.

OFF: the number is not redialled.

Backlight

You can specify whether or not the phone uses the

backlight. A marginal increase in standby/talk time

can be achieved by turning the backlight off. The

following options are available.

Auto Answer

Short: the backlight comes on when you press a key

or receive a call and switches off 10 seconds after the

last key is pressed.

With the Auto Answer function, the phone auto-

matically answers calls after 3, 5 or 10 seconds. You

can also turn this feature off.

Long: the backlight comes on when you press a key or

receive a call and switches off 20 seconds after the

last key is pressed.

Note: This feature is only available when the phone

is connected to a car kit (optional).

OFF: the backlight is not used.

S e t t in g s

Caller ID

Reset Settings

You can prevent your phone number from being

displayed on the phone of the person being called.

You can easily reset your phone to its default

configuration. Before proceeding, you must enter the

phone’s 4-digit password.

Note: Some networks do not allow the user to

change this setting.

Note: The password is preset to 0000. To change this

The following options are available.

password, refer to page 97.

Default: the default setting provided by the network

is used.

Active Line

Some SIM cards may be used with two subscriber

numbers (network service). This function is only

available if your SIM card supports it.

Hide Number: your number is not displayed on the

other person’s phone.

Send Number: your number is sent each time you

make a call.

This option allows you to select the line to be used

to make calls. However, calls can be answered on

both lines, regardless of the selected line. When you

select a line, the line number appears as an indicator

after the operator/service provider’s name.

Active Folder

The voice dial and voice command modes can be

activated automatically whenever the phone is

opened. The following options are available.

When you select the Manual option, you can choose

a line whenever you use the call barring, call

diverting or call waiting functions; in this case, there

is no indicator to show which line is active.

OFF: the voice dial and voice command modes must

be activated manually via the Voice Dial and Voice

Command menu options; for further information,

refer to pages 69 and 72 respectively.

Voice Dial: the voice dial mode is activated when

you open the phone.

Voice Command: the voice command mode is

activated when you open the phone.

Note: When you use the ear-microphone and the

Active Folder menu option is set to Voice Dial

or Voice Command, you can use the corres-

ponding function by pressing the button on the

ear-microphone.

S e t t in g s

Network Services

Menu 5-2

You can specify individual diverting options for each of

the following call types:

• Voice calls only

• Fax calls only (not available when line 2 is in use)

• Data calls only (not available when line 2 is in use)

These menu functions are network services.

Please contact your service provider to check their

availability and subscribe to them, if you so wish.

Example: You can:

• Systematically divert fax calls to your

office fax machine

• Divert voice calls to your colleague if you

are already using the phone

Call Diverting

Note: The call divert options may be different,

depending on your SIM card and those not

supported by your network operator may not

be shown.

To set your call diverting options, proceed as follows.

This network service enables incoming calls to be

rerouted to the number that you specify.

1. Select the type of call diverting required by

pressing

until the appropriate option

is highlighted, and then press the Select soft key.

Example: You may wish to divert your business calls

to a colleague while you are on holiday.

2. Select the type of calls to be diverted by

pressing

until the appropriate option

Call diverting can be set up in the following ways.

Divert Always: all calls are diverted.

is highlighted and then press the Select soft key.

3. Press the Activate soft key to confirm your settings.

4. Enter the number to which the calls are to be

diverted.

Busy: calls are diverted if your phone is engaged on

another call.

To enter an international code, hold down

No Reply: calls are diverted if you do not answer

the phone.

until the + sign is displayed. You can also select a

number in the phonebook or the voice server

number, by pressing the Options soft key, followed

by PhoneBook or Voice Server Number.

Unreachable: calls are diverted if you are not in an

area covered by your service provider.

5. When you are satisfied, press

or the OK soft

Cancel All: all call diverting options are cancelled.

key. The phone sends your settings to the network

and the network’s acknowledgement is displayed.

S e t t in g s

Call Barring

The call barring network service allows you to restrict

your calls.

To deactivate specific call diverting settings, proceed

as follows.

Call barring can be set up in the following ways.

All outgoing: calls cannot be made.

1. Select the call diverting option to be deactivated.

2. Select the type of calls to which this option

applies.

International: international calls cannot be made.

International except to home: when abroad, calls

can be made only to numbers within the current

country and to your home country, that is the country

where your home network provider is located.

3. Press the Remove soft key.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

All Incoming: calls cannot be received.

Incoming while abroad: calls cannot be received

when you are using your phone outside your home

service area.

You can also deactivate all call diverting settings by

selecting the Cancel All option.

Cancel All: all call barring settings are deactivated;

calls can be made and received normally.

You can specify individual call barring options for

each of the following call types:

• Voice calls only

• Fax calls only (not available when line 2 is in use)

• Data calls only (not available when line 2 is in use)

To set your call barring options, proceed as follows.

1. Select the type of call barring required by pressing

until the appropriate option is

highlighted and then press the Select soft key.

2. Select the type of calls to be barred by

pressing

until the appropriate option

is highlighted and then press the Select soft key.

3. Press the Activate soft key to confirm your

settings.

S e t t in g s

Call Waiting

4. Enter your call barring password supplied by your

service provider.

This network service enables you to be informed

when someone is trying to reach you during another

call.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

You can specify individual call waiting options for

each of the following call types:

• Voice calls only

• Fax calls only (not available when line 2 is in use)

• Data calls only (not available when line 2 is in use)

To deactivate specific call barring settings, proceed as

follows.

1. Select the call barring option to be deactivated.

2. Select the type of calls to which this option applies.

3. Press the Remove soft key.

To set your call waiting options, proceed as follows.

1. Select the type of calls to which the call waiting

option is to be applied by pressing

until the appropriate option is highlighted and then

4. Enter your call barring password supplied by your

service provider.

press the Select soft key.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

2. Press the Activate soft key to confirm your

settings.

You can also deactivate all call barring settings by

selecting the Cancel All option.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

Change Barring Password: you can set and change

the call barring password obtained from your service

provider using this option. You must enter the current

password before you can specify a new one.

Once you have entered a new password, you are

asked to confirm it by entering it again.

To deactivate specific call waiting settings, proceed

as follows.

1. Select the type of calls to which the option applies.

2. Press the Deactivate soft key.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

You can also deactivate all call waiting settings by

selecting the Cancel All option.

S e t t in g s

Network Selection

Line Identification

The Network Selection feature enables you to control

whether the network used when roaming (outside

your home area) is selected automatically or manually.

This option allows you to view the following line

identification settings.

CLIP (Calling Line Identification Presentation) /

COLP (Connected Line Identification Presentation)

If these network functions are active, the caller’s

number is displayed during a call. If the phone

number matches one stored in the phonebook, the

caller’s name is also displayed.

Note: You can select a network other than your home

network only if it has a valid roaming

agreement with your home network.

To indicate whether the network is to be selected

automatically or manually when roaming, proceed as

follows.

CLIR (Calling Line Identification Restriction) /

COLR (Connected Line Identification Restriction)

If these network functions are active, your phone

number is not displayed on the called person’s phone.

1. When the Network Selection menu is displayed,

press the Select soft key.

2. Press

until the appropriate option is

highlighted and press the OK soft key.

If you select Automatic, you are connected to the

first available network when roaming.

If you select Manual, the phone scans for the

available networks. Go to Step 3.

3. Press

until the preferred network is

highlighted and press the OK soft key.

You are connected to that network when roaming.

S e t t in g s

Closed User Group (CUG)

This network service allows incoming and outgoing calls

to be restricted to a selected user group. You may be a

member of up to 10 user groups.

For details on how to create, activate and use a closed

user group, contact your service provider.

Outside Access: enables you to allow or prohibit

calls to numbers other than those nominated for the

closed user group. This feature depends on the

nature of your CUG subscription. Please check with

your service provider.

Default Group: you may communicate a default

CUG to your service provider. If you have done so,

you can enable the Default Group option on your

phone. When making a call, you will be given the

option of using your default CUG, instead of

selecting one from the list.

Example: A company lends SIM cards to its employees

and wants to restrict outgoing calls to members

of the same team.

When you select the Closed User Group option, you

are asked if you want to activate the CUG function.

Press the Yes soft key to confirm. You can now access

the following options.

Security Settings

Menu 5-3

Deactivate: deactivates the CUG function.

Index List: lets you list, add or delete CUG index

numbers. The list of current CUG indexes appears. Add

a new CUG index (as advised by your service provider)

or delete a selected group.

The security settings enable you to restrict the use of

your phone to:

• The people of your choice

• The types of calls of your choice

To...

Then press...

Various codes and passwords are used to protect the

features of your phone. They are described in the

following sections (also see page 129).

Scroll through the

existing CUG indexes

Add a new CUG index The Options soft key, select

PIN Check

Add and enter the index.

When the PIN Check feature is enabled, you must

enter your PIN each time you switch the phone on.

Consequently, any person who does not have your

PIN cannot use your phone without your approval.

Delete a CUG index

to select the

index you want to delete, press

the Options soft key and

select Delete.

S e t t in g s

Note: Before disabling the PIN Check feature, you must

Change Password

enter your PIN.

The Change Password feature allows you to change your

current phone password to a new one. You must enter

the current password before you can specify a new one.

The following options are available.

Enable: you must enter the PIN each time the phone is

switched on.

The password is factory set to 0000. Once you have

entered a new password, you are asked to confirm it by

entering it again.

Disable: the phone connects directly to the network

when you switch it on.

To change your PIN, refer to the Change PIN menu

option below.

SIM Lock

When the SIM Lock feature is enabled, your phone only

works with the current SIM. You must enter the SIM lock

code.

Change PIN

This feature allows you to change your current PIN to a

new one, provided that the PIN Check feature is

enabled. You must enter the current PIN before you can

specify a new one. Once you have entered a new PIN,

you are asked to confirm it by entering it again.

Once you have entered the lock code, you are asked to

confirm it by entering it again.

To unlock the SIM, you must enter the SIM lock code.

FDN Mode

Phone Lock

The FDN (Fixed Dial Number) mode, if supported by your

SIM card, allows you to restrict your outgoing calls to a

limited set of phone numbers.

When the Phone Lock feature is enabled, the phone is

locked and you must enter the 4-digit phone password

each time the phone is switched on.

The following options are available.

The password is factory set to 0000. To change the

phone password, refer to the Change Password menu

option on page 97.

Once the correct password has been entered, you can

use the phone until you switch it off.

Enable: you can only call phone numbers stored in the

phonebook. You must enter your PIN2.

Disable: you can phone any number.

Note: Not all SIM cards have a PIN2. If your SIM card

The following options are available.

does not, this menu option is not displayed.

Enable: you are required to enter the phone password

when you switch the phone on.

To change your PIN2, refer to the Change PIN2 menu

option on page 98.

Disable: you are not asked to enter the phone

password when you switch the phone on.

S e t t in g s

Note: This feature is only available if you have selected

Change PIN2

the My Image menu option.

The Change PIN2 feature allows you to change your

current PIN2 to a new one. You must enter the current

PIN2 before you can specify a new one.

Main Menu

This option allows you to select the type of animation

for the menus: Classical or Cute.

Once you have entered a new PIN2, you are asked to

confirm it by entering it again.

Skin

Note: Not all SIM cards have a PIN2. If your SIM card

does not, this menu option is not displayed.

This option allows you to select one of three menu

patterns.

LCD Brightness

LCD/ LED Settings

Menu 5-4

This option allows you to adjust the brightness of the

Wallpaper

displays. Press

brightness.

to increase or decrease the

This option allows you to select the background image

to be displayed on your phone.

Service Colour

Image: allows you to select one of the five predefined

images or the calendar. When the calendar is displayed

in idle mode, you can scroll through the months by

There are six colours available for the service light:

green, yellow, orange, violet, blue and sky blue.

You can scroll through these colours, by pressing

pressing

. Press the Select soft key to select the

required colour.

My Image: allows you to select one of the images

downloaded from the content CD or a WAP site.

Graphic Logo

To preview an image, press the Preview soft key. To

This option allows you to display your operator’s logo

instead of its name.

return to the image list, press the

soft key.

If you select the Animation option, the downloaded

images are displayed in sequence.

ON: the operator logo stored in your phone is displayed

in idle mode; if no logo has been stored, the operator

name is displayed.

My Image Settings: allows you to set the text colour,

background colour, text position and display time by

selecting the appropriate sub-options.

OFF: the operator name is displayed in idle mode.

S e t t in g s

Organiser

Browser Settings

Menu 5-5

Note: This menu may not be shown, depending on

The Organiser feature enables you to:

• Write your schedule or to do list

your network service provider.

•

Set the alarm so that the phone rings at a specific

time (to remind you of an appointment for example)

You can set up several proxies, using the Proxy

Settings menu option, and you can designate one as

the current proxy, using the Current Proxy menu

option. The following parameters must be set for each

proxy; they may vary depending on your service

provider. Contact your service provider for further

details.

• Use your phone as a calculator

• View the calendar

• Find out what time it is in various cities around

the world

• Set the current date and time

• Use your phone as a unit converter, timer or

stopwatch

Proxy Name: name of the proxy server.

WDP Address: IP address required to connect to the

Internet.

Scheduler

Menu 6-1

The Scheduler helps you to keep track of reminders,

calls that you need to make, meetings and birthdays.

The phone alarm rings when the date set for a

birthday, reminder or call is reached.

Port Number: number of the port used to connect the

gateway.

Home URL: URL address of your home web site.

Access Point

When you access the Scheduler menu, the

following options are available.

Go to date: allows you to enter a particular date and

schedule an event on that date.

NAS Phone Number: PPP server phone number.

Password: PPP server password (may be optional).

View All: shows the events scheduled.

Delete All: deletes all the scheduled events.

Network Type: V.32 Transparent, V.32 Non-Transparent,

V.110 Transparent or V.110 Non-Transparent.

100

101

Org a n is e r

To schedule a new event, proceed as follows.

A date that has a schedule already associated with it

is highlighted in a box. If you select such a date, the

contents are displayed.

1. When the calendar is displayed, select the month

by pressing the volume keys on the left side of the

phone, select the week by pressing

and select the day by pressing

can also use the Go to date menu option to

. You

Note: If you have scheduled more than one event on

a given day, you can scroll to the required

event by pressing

specify the date.

The following options are available.

Notes:

Add: allows you to add new contents.

•

You can also use

and or to select the day.

To exit the Calendar screen, press

phone returns to the previous menu level.

to select the week,

Delete: deletes the scheduled event.

•

. The

Move: moves the scheduled event to a new date.

Copy: copies the scheduled event to a new date.

2. Press the OKsoft key.

Delete Day: deletes all events scheduled on that

date.

3. Select a schedule type. Four types are available.

Reminder: requires a description and the time.

Call: requires a phone number and the time.

Meeting: requires a description and the time.

Birthday: requires a name and the time.

Alarm

Menu 6-2

This option allows you to set the alarm to ring at a

specific time when your phone is switched on. You

can set one or more alarms.

4. Enter the appropriate information, referring to

page 44 for further details on how to enter text if

necessary.

The following alarms are available.

Daily Alarm: the alarm rings every day at the same

time.

5. If you wish to set the alarm to ring on the

scheduled date and time, select Yes. Otherwise,

select No.

Once Alarm: the alarm rings only once and is then

deactivated.

Weekly Alarm: the alarm rings every week on the

same day and at the same time.

6. If you selected Yes, set the time for the alarm and

press OK.

The Alarm Tone option allows you to select a

specific tone for the alarm.

102

103

Org a n is e r

Calculator

Menu 6-3

To set the alarm, proceed as follows.

You can use the phone as a 9-digit calculator. The

calculator provides the basic arithmetic functions:

addition, subtraction, multiplication, division,

percentages.

1. Select an alarm type by pressing the Select soft

key.

The Set Alarm option allows you to set the alarm

time or days of the week.

To use the calculator, proceed as follows.

1. Enter the first figure using the number keys.

2. If you have chosen Weekly Alarm, select the

required day of the week and press

2. Press the Operator soft key until you find the

appropriate arithmetic symbol: + (add), - (subtract),

x (multiply), / (divide).

The symbol appears to indicate that the day is

selected.

To remove it, press

You can set more than one day.

3. Enter the second figure.

3. Press the OK soft key.

4. Repeat Steps 2 and 3 if necessary.

4. Enter the required time, then press the OK soft key.

5. To calculate the result to two decimal places, press

the Equal soft key or

To erase any mistakes or clear the display, press

To enter a decimal point, press

Alarm Activated is displayed.

Once an alarm has been set, you can see the alarm

icon ( ) in the top line of the display. To stop the

alarm when it rings, open the phone or press any

key.

To deactivate the alarm, select the Remove Alarm

option.

Note: If your phone is switched off, the alarm will not

ring.

104

105

Org a n is e r

To Do List

Menu 6-4

Examples:

This feature allows you to:

• Draw up a list of tasks to be done

• Assign a priority and deadline to each task

• Sort the tasks by priority and status mark

Expression

Key Sequence Result

12*3+5=

34+57=

12x3+5 (or

)

34+57

45+57

48-23

14-23

68x25

68x40

35/14

98/14

200x10

10/100

(or

Creating the To Do List

45+57=

102

1. Press the New soft key.

48-23=

2. Enter the task.

For further information on how to enter text, see

page 44.

14-23=

-9

68*25=

1700

2720

2.5

68*40=

3. Press the OKsoft key.

35/14=

4. Select high or low priority using

the Select soft key.

, and

98/14=

10% of 200

10=? % of 100

5. Enter your deadline.

10% premium of 200 200+10

10% discount of 200 200-10

220

180

6. Press the Yes soft key.

Editing the To Do List

Square of 4

(or

)

Reciprocal of 8

0.12

If tasks are already defined in the to do list when you

select the To Do List menu option, the current

contents are displayed with the associated status

mark and priority.

Note: When you have finished with the calculator,

press to return to the previous menu level.

To view the detailed contents of a task, press the

View soft key. To change the status of a task,

press

106

107

Org a n is e r

You can choose the following options, by pressing the

Options soft key.

World Time

Menu 6-6

You can use your phone to check the current time in

21 major cities around the world. Scroll through the

New: allows you to create a new task.

Mark: allows you to mark a task as completed.

Edit: allows you to edit an existing task.

cities using

The screen shows the:

• City name

• Current date and time

Sort: allows you to sort the tasks by priority (high,

low) or by status.

• Time difference between the selected city and your

city if you have set the local time (see below for

further details) or GMT (by default)

Copy: allows you to copy a task.

Delete: allows you to delete a task.

Delete All: allows you to delete all tasks.

To select the time zone in which you are located,

proceed as follows.

1. Select the city corresponding to your time zone by

pressing

one or more times.

Calendar

Menu 6-5

The local date and time are displayed.

2. Press the Set soft key.

You can view calendars for 1900 through to 2099.

You can also view the lunar date of the selected date.

3. To...

Then press the...

Update the current

date/time with this

new setting

Set Local soft key.

To move to the...

Previous day

Then press...

Next day

Indicate that the

time zone is currently A check mark is shown

using the daylight

saving time

Set DST soft key.

Previous week

Next week

next to the time

difference.

Next or previous month

The volume key on the

left side of the phone.

Indicate that the

time zone is no longer (only available when the

Remove DST soft key

using the daylight

saving time

check mark is shown

next to the time

difference).

You can also change dates by pressing the Goto soft

key.

108

109

Org a n is e r

Clock

Menu 6-7

Conversion

Menu 6-8

This option allows you to change the current time

and date.

This option allows you to convert from one type of

unit to another.

To convert a value, proceed as follows.

The following options are available.

1. Select the type of conversion to be performed from

Length, Weight, Volume, Area and

Set Time: allows you to change the time displayed,

using the 24-hour system.

Temperature, and press the Select soft key.

Note: Before setting the time, you must specify your

2. Enter the value to be converted and press

move to the Fromfield.

time zone, via the World Time menu option.

Set Date: allows you to change the date displayed.

Enter the day, month and year.

3. Select the original unit by pressing

press to move to the To field. Refer to the

table on the following page for the units available.

and

Format: allows you to select the date format:

• DD/MM/YYYY

• MM/DD/YYYY

4. Select the required unit by pressing or

to view the

5. Press the Select soft key or

result.

The result appears in the Answer box.

111

110

Org a n is e r

Timer

Menu 6-9

Using the Timer feature, you can set the phone to

sound an alarm after a certain time.

Units Available

Type

Units

1. Press the Set soft key.

Length

yard mile

2. Enter the length of time you wish to count down in

hours and minutes and press the OK soft key.

Weight

Volume

ton

pound

3. Press the Start soft key to start counting down.

grain oz

Even if you exit the Timer screen, the timer will

continue running. After the specified time has expired,

the phone informs you by playing a melody and

displaying a text notification. To stop the timer melody

when it rings, open the phone or press any key.

in³

ft³

yd³

gal

Area

in²

ft²

yd²

To stop the timer before the end, press the Stop soft

key on the Timer screen.

Acre

Temperature

°C

°F

Note: The timer uses power from the battery;

consequently, the phone’s operating time will

be reduced.

112

113

Org a n is e r

Stopwatch

Menu 6-10

The stopwatch can be used to measure times for

various sports.

Example: Running or swimming races.

Up to four stopwatches can be used.

The precision of the stopwatch is one hundredth of a

second. The maximum measurement time is 10 hours.

1. To start the stopwatches, press the Select soft

key.

2. When you wish to stop the first stopwatch, press

the Select soft key. Repeat this step for the other

stopwatches.

3. Press the Reset soft key to reset the watches.

4. Press

to exit.

114

Games

Using this menu option, you can also enjoy playing

three games.

Scroll to the required game by pressing

and press the Select soft key.

The following options are available.

New Game: allows you to start a new game.

High Score: shows you the High Score table.

Key Info: shows you which keys do what within the

game.

Continue: allows you to continue a previously saved

game. This option is only available when a game has

already been saved.

While you are

Then press...

playing a game, to...

Adjust the game volume

Pause the game

The volume keys.

Pause and exit the game

115

OGrgaamn eisse r

Bowling

Menu 7-1

When you reach the finish line, the time spent and

your score are displayed.

The goal of the game is to knock down a triangular

group of ten pins by rolling a ball.

When you start a new game, you can select the

required mode, character and ball by pressing

Key Commands

To...

Then press...

When the game starts, the screen shows the character

and ball. Move the character first, then select the spin

and direction, and finally set the power of the ball.

Move left

Move right

Accelerate

Brake

Key Commands

To...

Then press...

Move left

Move right

Honey Ball

Menu 7-3

The goal of the game is to break honey blocks by

bouncing a ball between a bat and the honey blocks.

Set the speed or spin

or throw the ball

When you start a new game, the ball is sitting on the

bat in the middle of the screen. Once you start the ball

moving, you must position the bat, so that the ball

continues to bounce off it. Each time the ball hits a

honey block, the block breaks, sometimes revealing

letters that enhance the efficiency of the bat or ball:

Turn the sound on or off

Speed Up

Menu 7-2

The goal of the game is to get to the destination

without crashing in the shortest time possible.

B: the bat and ball change back to their standard form.

C: the ball sticks to the bat each time it hits it, giving

you time to optimise your position.

When you start a new game, you can select a

destination, level of difficulty and vehicule. Once you

have selected all the options, “Ready?” is displayed and

the countdown starts.

H: the bat increases in length.

P: the ball is changed into a power ball, so that it

no longer bounces off the blocks. It goes straight

through them, destroying anything that it touches.

116

117

Ga m e s

WWW Services

If you reach the final stage of the game, the rules are

slightly different. The honey blocks are much

stronger and need to be hit more than once before

they are destroyed. At the same time, small bees

attack the bat, damaging it a little each time until it

is destroyed and you lose a life.

You can use your phone as a Web Browser. You can

obtain up-to-date news, weather, sport and other

information as well as use e-mail and other Internet

services.

Please contact your service provider to open your

Internet account. To use the Web Browser, you must

check that you have specified your mobile phone

number in the Own Number menu option.

Key Commands

To...

Then press...

Slope up

Slope down

Move left

Move right

Hit the ball

Home

Menu 8-1

When you select this menu option, the phone

connects to the network and loads the homepage of

the Wireless Web service provider.

Once connected, the homepage is displayed. The

content depends on the service provider.

Note: To launch the browser from the idle mode,

press

in the centre of the scroll button.

To exit the browser, press

at any time.

The phone returns to the idle mode.

118

119

WWW S e rv ic e s

Bookmark

Menu 8-2

Goto

Menu 8-3

You can store the addresses of up to five Internet

sites for easy access using the Bookmark feature.

This menu option allows you to manually enter the

URL address of the Web site that you wish to access.

Enter the URL address and press the Go soft key.

Three options are available.

Edit: allows you to create or edit a local bookmark.

1. Enter the required title (up to 14 characters).

2. Press the OKsoft key.

Navigating with the WAP Browser

You can surf the Internet using either the phone keys

or the WAP Browser menu.

3. Enter the URL address (up to 128 characters).

4. Press the OKsoft key.

Using the Phone Keys

Go: allows you to open the selected page.

When surfing the Internet, the phone keys function

differently from the phone mode.

Delete: allows you to delete the selected bookmark.

To...

Then press...

Scroll each line of the

content area

Return to the previous page

(except on the

homepage).

Return to the startup

homepage

and hold it

down anywhere.

120

121

WWW S e rv ic e s

Using the WAP Browser Menu

Show URL: shows the URL of the current page.

There are various menu options available when surfing

the Wireless Web.

Clear Cache: allows you to clear the information

stored in the cache (the phone’s temporary memory

used to store the most recently accessed Web

pages).

To access the WAP Browser menu, proceed as follows.

1. Press

A list of menu options appears.

About...: shows the version of the WAP Browser.

2. Highlight the required option using

Entering Text, Numbers or Symbols

3. Press the left soft key to select the option.

When you are prompted to enter text, the current

text entry mode appears above the right soft key

(ABC/abc). To change modes, press the right soft key.

Three options are displayed.

4. If necessary, select the secondary option by

pressing

, followed by the left soft key.

Note: The WAP Browser menus may vary, depending

on your version of the browser.

ABC/abc: allows you to enter lower-case and upper-

case letters. You can switch between lower- and

The following options are available.

Back: returns to the previous page.

upper-case letters by pressing

123: allows you to enter numbers.

Home: takes you back at any time to the homepage of

the Wireless Web service provider.

Sym: allows you to enter various symbols and

punctuation marks. When you select this option, a

window is displayed with all available symbols. To

Exit: exits the WAP Browser.

select the required symbol, use

Inbox: stores received push messages or WAP data.

Reload: reloads the current page.

If you wish to edit text, move the cursor to the

required position, using

letter by pressing

and clear the incorrect

Advanced: gives you access to the following

advanced features. Some features may not be

supported by your network operator.

. Then enter the correct letter.

123

122

Ad d it io n a l S e rv ic e s

Additional Services

ALS (Alternate Line Service)

Note: Please contact your service provider to check

the availability of this feature and how to

subscribe to ALS.

Setting the Ring Type

To distinguish between incoming calls on the two

lines, you can select a different ring tone for each line

via the Ring Tone menu option. For further details,

refer to page 74.

The ALS feature enables two lines to be associated

with one SIM card. Consequently, you can make and

receive calls on either line. If you subscribe to this

network service, a few additional menu options

enable you to set up this feature.

Setting Call Diverting Options

You can set up call diverting via the Call Diverting

menu option. This service reroutes incoming calls on

the line of your choice to a specified number. For

further details, see page 86.

Selecting a Line

You can set a line for each call via the Active Line

menu option. For further details, refer to page 85.

Editing the Line Name

You can edit the name of each line via the Own

Number menu option.

When you edit the name of a line, this name replaces

“Line 1” or “Line 2”, as applicable. For further details,

refer to page 81.

124

125

S o lv in g P ro b le m s

Solving Problems

Before contacting the after-sales service, perform the

following simple checks. They may save you the time

and expense of an unnecessary service call.

“No Service” is displayed

• The network connection was lost. You may be in a

weak reception area (in a tunnel or surrounded by

buildings). Move and try again.

• You are trying to access an option for which you

have not taken out a subscription with your

service provider. Contact the service provider for

further details.

When you switch your phone on, the following

messages appear

Insert SIM Card

• Check that the SIM card is correctly installed.

Phone Locked

You have entered a number but it was not dialled

• The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

• Have you pressed

• Are you accessing the right cellular network?

• You may have set an outgoing call barring option.

Enter PIN

• You are using your phone for the first time. You

must enter the Personal Identification Number

supplied with the SIM card.

Your correspondent cannot reach you

• The option requiring that the PIN be entered each

time the phone is switched on was enabled. You

must enter your PIN and then disable this option if

so required.

• Is your phone switched on (

than one second)?

• Are you accessing the right cellular network?

pressed for more

• You may have set an incoming call barring option.

Enter PUK

• The PIN was entered wrongly three times in

succession and the phone is now blocked. Enter

the PUK supplied by your network operator.

Your correspondent cannot hear you speaking

• Have you switched off the microphone (Mute

appears)?

• Are you holding the phone close enough to your

mouth? The microphone is located on the bottom

right of the phone.

126

127

S o lv in g P ro b le m s

Reference Information

Access Codes

The phone starts beeping and “**Warning** Battery

Low” flashes on the display

There are several access codes that are used by your

phone and its SIM card. These codes help you protect

the phone against unauthorised use.

• The battery is insufficiently charged. Replace the

battery and recharge it or connect the travel adapter.

The access codes (except for the PUK and PUK2 codes)

can be changed using the Security Settings menu

option. See page 95 for further details.

The audio quality of the call is poor

• Check the signal strength indicator on the display ( );

the number of bars indicates the signal strength from

strong (

) to weak ( ).

Phone Password

• Try moving the phone slightly or moving closer to a

window if you are in a building.

The phone password can be set to avoid unauthorised

use of the phone. The default password supplied with

the phone is 0000, but you are advised to change it

before you start using your phone. Keep the new code

secret and in a safe place, separate from the phone.

No number is dialled when you recall a phonebook

entry

• Check that the numbers have been stored correctly,

by using the Phonebook Search feature.

• Re-store them, if necessary.

If you key in an incorrect password five times in

succession, the phone will not accept the correct code

for the next five minutes.

If the above guidelines do not help you to solve

the problem, take a note of:

• The model and serial numbers of your phone

• Your warranty details

• A clear description of the problem

Then contact your local dealer or Samsung

after-sales service.

128

129

Re f e re n c e In f o rm a t io n

PUK

The PUK (Personal Unblocking Key) is required to

change a blocked PIN. The PUK may be supplied with

the SIM card. If not, contact your local service

provider.

The PIN (Personal Identification Number) protects your

SIM card against unauthorised use. It is usually

supplied with the SIM card. When the PIN Check

feature is enabled (see page 95), you must enter the

PIN each time you switch on the phone.

If you key in an incorrect PUK ten times in

succession, the SIM card cannot be used anymore.

Contact your service provider for a new card.

If you key in an incorrect PIN three times in succession,

key in the PUK and press the OK soft key. Key in a new

PIN and press the OK soft key. Key in the new PIN

again and press the OK soft key.

You cannot change the PUK. If you lose the code,

contact your service provider.

PIN2

PUK2

The PIN2, supplied with some SIM cards, is required to

access some functions, such as charging unit counters.

These functions are only available if supported by your

SIM card.

The PUK2, supplied with some SIM cards, is required

to change a blocked PIN2.

If you key in an incorrect PUK2 ten times in

succession, you cannot use the functions requiring

the PIN2. Contact your service provider for a new

card.

If you key in an incorrect PIN2 three times in

succession, key in the PUK2 and press the OK soft key.

Key in a new PIN2 and press the OK soft key. Key in

the new PIN2 again and press the OK soft key.

You cannot change the PUK2. If you lose the code,

contact your service provider.

Call Barring Password

The 4-digit call barring password is required when you

use the Call Barring function. You obtain the password

from your service provider when you subscribe to this

function.

130

131

Re f e re n c e In f o rm a t io n

Health and Safety Information

Precautions When Using Batteries

• Never use any charger or battery that is damaged

in any way.

Exposure to Radio-Frequency

Energy (SAR Information)

This phone meets Australian Communications

Authority (ACA) requirements (AS/NZS 2772)

concerning exposure to radio waves.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base

station, it uses less power; talk and standby time

are greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

Your mobile phone is a radio transmitter and receiver.

It is designed and manufactured, so as not to exceed

the limits for exposure to radio-frequency (RF) energy,

as recommended by ACA. These limits are part of

comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines were developed by independent scientific

organisations through periodic and thorough

evaluation of scientific studies. The limits include a

substantial safety margin designed to ensure the

safety of all persons, regardless of age and health.

• Battery charging time depends on the remaining

battery charge and the type of battery and charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out.

When the operation time (talk time and standby

time) is noticeably shorter than normal, it is time

to buy a new battery.

The exposure standard for mobile phones employs a

unit of measurement known as SAR (Specific

Absorption Rate). The SAR limit recommended by

ACA is 1.6W/kg.

• If left unused, a fully charged battery will

discharge itself over time.

• Use only Samsung-approved batteries and

recharge your battery only with Samsung-approved

chargers. When a charger is not in use, disconnect

it from the power source. Do not leave the battery

connected to a charger for more than a week,

since overcharging may shorten its life.

* The SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged

over one gram of body tissue. The limit incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements. The SAR

• Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

values may vary depending on the national reporting requirements and the network band.

132

133

Re f e re n c e In f o rm a t io n

• Do not leave the battery in hot or cold places, such

as in a car in summer or winter conditions, as you

will reduce the capacity and lifetime of the battery.

Always try to keep the battery at room

1. Get to know your wireless phone and its features,

such as speed dial and redial. If available, these

features help you to place your call without taking

your attention off the road.

temperature. A phone with a hot or cold battery

may temporarily not work, even when the battery is

fully charged. Li-ion batteries are particularly

affected by temperatures below 0 °C (32 °F).

2. When available, use a hands-free device. If

possible, add an extra layer of convenience and

safety to your wireless phone with one of the

many hands-free accessories available today.

• Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object (coin,

clip or pen) causes a direct connection between the

+ and – terminals of the battery (metal strips on

the battery), for example when you carry a spare

battery in a pocket or bag. Short-circuiting the

terminals may damage the battery or the object

causing the short-circuiting.

3. Position your wireless phone within easy reach. Be

able to access your wireless phone without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, let your

voice mail answer it for you.

4. Let the person you are speaking with know you are

driving; if necessary, suspend the call in heavy

traffic or hazardous weather conditions. Rain,

sleet, snow, ice and even heavy traffic can be

hazardous.

• Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

5. Do not take notes or look up phone numbers while

driving. Jotting down a To Do list or flipping

through your phonebook takes your attention away

from your primary responsibility, driving safely.

Road Safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime.

But an important responsibility accompanies the

benefits of wireless phones, one that every user must

uphold.

When driving a car, driving is your first responsibility.

When using your wireless phone behind the wheel of

a car, practice good common sense and remember the

following tips.

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

pulling into traffic. Try to plan calls when your car

will be stationary. If you need to make a call while

moving, dial only a few numbers, check the road

and your mirrors, then continue.

134

135

Re f e re n c e In f o rm a t io n

Operating Environment

Remember to follow any special regulations in force

in any area and always switch off your phone

whenever it is forbidden to use it, or when it may

cause interference or danger.

7. Do not engage in stressful or emotional

conversations that may be distracting. Make the

people with whom you are talking aware that you

are driving and suspend conversations that have

the potential to divert your attention from the

road.

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

8. Use your wireless phone to call for help. Dial the

emergency number in the case of fire, traffic

accident or medical emergencies. Remember, it is

a free call on your wireless phone!

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it is

recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

9. Use your wireless phone to help others in

emergencies. If you see a car accident, crime in

progress or other serious emergency where lives

are in danger, call the emergency number, as you

would want others to do for you.

Electronic Devices

10. Call roadside assistance or a special non-

emergency wireless assistance number when

necessary. If you see a broken-down vehicle

posing no serious hazard, a broken traffic signal,

a minor traffic accident where no one appears

injured, or a vehicle you know to be stolen, call

roadside assistance or any other special non-

emergency wireless number.

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against the

RF signals from your wireless phone. Consult the

manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a

minimum distance of 15 cm (6 inches) be maintained

between a wireless phone and a pacemaker to avoid

potential interference with the pacemaker. These

recommendations are consistent with the

independent research and recommendations of

Wireless Technology Research.

136

137

Re f e re n c e In f o rm a t io n

Persons with pacemakers:

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

• Should always keep the phone more than 15 cm (6

inches) from their pacemaker when the phone is

switched on

Posted Facilities

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to

minimise potential interference

Switch off your phone in any facility where posted

notices require you to do so.

Potentially Explosive Atmospheres

If you have any reason to suspect that interference is

taking place, switch off your phone immediately.

Switch off your phone when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even

death.

Hearing Aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such interference,

you may wish to consult your hearing aid

manufacturer to discuss alternatives.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded

of the need to observe restrictions on the use of

radio equipment in fuel depots (fuel storage and

distribution areas), chemical plants or where blasting

operations are in progress.

Other Medical Devices

If you use any other personal medical devices,

consult the manufacturer of your device to determine

if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining

this information. Switch off your phone in health care

facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care

facilities may be using equipment that could be

sensitive to external RF energy.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas

(such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust

or metal powders, and any other area where you

would normally be advised to turn off your vehicle

engine.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

138

139

Re f e re n c e In f o rm a t io n

Emergency Calls

Remember that your phone may be the only means of

communication at the scene of an accident; do not

cut off the call until given permission to do so.

This phone, like any wireless phone, operates using

radio signals, wireless and landline networks as well

as user-programmed functions, which cannot

guarantee connection in all conditions. Therefore,

you should never rely solely on any wireless phone

for essential communications (medical emergencies,

for example).

Other Important Safety Information

• Only qualified personnel should service the phone

or install the phone in a vehicle. Faulty installation

or service may be dangerous and may invalidate

any warranty applicable to the device.

Remember, to make or receive any calls the phone

must be switched on and in a service area with

adequate signal strength. Emergency calls may not

be possible on all wireless phone networks or when

certain network services and/or phone features are

in use. Check with local service providers.

• Check regularly that all wireless phone equipment

in your vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases or

explosive materials in the same compartment as

the phone, its parts or accessories.

To make an emergency call, proceed as follows.

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present

location (for example, 112 or any other official

emergency number). Emergency numbers vary by

location.

• For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including both installed or portable

wireless equipment in the area over the air bag or

in the air bag deployment area. If wireless

equipment is improperly installed and the air bag

inflates, serious injury could result.

3. Press the <SEND> key.

If certain features are in use (call barring, for

example), you may first need to deactivate those

features before you can make an emergency call.

Consult this document and your local cellular service

provider.

• Switch off your phone before boarding an aircraft.

The use of wireless phones in aircraft may be

dangerous to the operation of the aircraft, and is

illegal.

When making an emergency call, remember to give

all the necessary information as accurately as

possible.

• Failure to observe these instructions may lead to

the suspension or denial of telephone services to

the offender, or legal action, or both.

140

141

Re f e re n c e In f o rm a t io n

Care and Maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for

many years.

• Do not drop, knock or shake the phone. Rough

handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or

strong detergents to clean the phone. Wipe it with

a soft cloth slightly dampened in a mild soap-and-

water solution.

• Keep the phone and all its parts and accessories

out of the reach of small children’s.

• Do not paint it. Paint can clog the device’s moving

• Keep the phone dry. Precipitation, humidity and

liquids contain minerals that will corrode

electronic circuits.

parts and prevent proper operation.

• Do not put the phone in or on heating devices,

such as a microwave oven, a stove or a radiator.

The phone may explode when overheated.

• Do not touch the phone with a wet hand while it is

charging. Doing so may cause an electric shock to

you or damage to the phone.

• Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

• Do not use or store the phone in dusty, dirty areas,

as its moving parts may be damaged.

• Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt

certain plastics.

• If the phone, battery, charger or any accessory is

not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if necessary, arrange for service.

• Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the phone,

which may damage the phone’s electronic circuit

boards.

142

143

Glo s s a ry

Glossary

To help you understand the main technical terms and

abbreviations used in this booklet and take full

advantage of the features of your mobile phone, here

are a few definitions.

CLI (Caller Line Identification) Services

Service allowing subscribers to view or block the

telephone numbers of callers.

GSM (Global System for Mobile Communication)

Active Folder

International standard for cellular communication,

guaranteeing compatibility between the various

network operators. GSM covers most European

countries and many other parts of the world.

Ability to voice dial or submit a voice command

immediately on opening the phone.

ALS (Alternate Line Service)

Capability of associating two lines with one SIM

card. With this service, you can make and receive

calls on either line, as required.

Multiparty Calling

Ability to establish a conference call involving up to

five additional parties.

Call Barring

Phone’s Password

Ability to restrict outgoing and incoming calls.

Security code used to unlock the phone when you

have selected the option to lock it automatically each

time it switches on.

Call Diverting

Ability to reroute calls to another number.

PIN (Personal Identification Number)

Call Holding

Security code that protects the phone/SIM against

unauthorised use. The PIN is supplied by the service

provider with the SIM card. It may be a four to eight-

digit number and can be changed, as required.

Ability to put one call on standby while answering or

making another call; you can then switch between

the two calls, as required.

Call Waiting

Ability to inform users that they have an incoming

call when engaged on another call.

144

145

Glo s s a ry

PUK (PIN Unblocking Key)

Soft Keys

Security code used to unlock the phone when an

incorrect PIN has been entered three times in

succession. The eight-digit number is supplied by

the service provider with the SIM card.

Two keys marked and on the phone, the

purpose of which:

• Varies according to the function that you are

currently using

• Is indicated on the bottom line of the display just

above the corresponding key

Roaming

Use of your phone when you are outside your home

area (when travelling for example).

Voice Mail

Computerised answering service that automatically

answers your calls when you are not available, plays

a greeting (optionally in your own voice) and records

a message.

SIM (Subscriber Identification Module)

Card containing a chip with all the information

required to operate the phone (network and memory

information, as well as the subscriber’s personal

data). The SIM card fits into a small slot on the back

of the phone and is protected by the battery.

SMS (Short Message Service)

Network service sending and receiving messages to

and from another subscriber without having to speak

to the correspondent. The message created or

received (up to 160 characters long) can be

displayed, received, edited or sent.

146

147

In d e x

Index

D (continued)

C (continued)

Deleting (continued)

phonebook entries • 40

schedule events • 101

to do list tasks • 108

voice commands • 72

voice dial numbers • 71

voice memos • 73

Dialled Calls • 58

Dialling • 24

Icons • 14

Identifying

ABC mode • 44; 48

Access codes • 129

Accessories • 9

Active Folder • 84

Active Line • 85

Alarm • 103

Calls (continued)

received • 57

records • 57

callers • 84

lines • 93

Information numbers • 43

Input mode

redialling • 25

automatically • 83

changing • 45

setting • 81

rejecting • 27

Alert Type • 77

ALS • 124

ring tone • 40

International calls • 24

Internet • 119

searching for a number in

the phonebook • 42

time • 58

phonebook numbers • 42

speed • 41

Answering

calls • 26

voice • 69

second call • 33

Any-key Answer • 82

Auto Answer • 83

Auto Redial • 83

via the phonebook • 42

voice functions • 69

waiting • 33; 91

Key tones

muting • 36

selecting • 78

sending • 36

volume • 26

Keys

Display

brightness • 99

external • 15

Care • 142

Changing

passwords

call barring • 90

phone • 97

icons • 14

language • 81

main • 13

Backlight • 15; 82

Barring

calls • 89

password • 90; 131

Batteries

settings • 98

location • 10

purpose • 11

Diverting calls • 86

PIN • 96

PIN2 • 98

text input modes • 45

Characters

Ear-microphone • 23

Earpiece volume • 26

Editing

charging • 19

installing • 17

low battery indicator • 21

precautions • 133

Brightness • 99

Broadcast • 65

Browser

entering • 44

Charging batteries • 19

Clock • 110

Language • 81

Last number redialling • 25

LCD

missed calls • 29

phonebook entries • 40

to do list • 107

Emergency calls • 140

Ending calls • 25

Error Tone • 79

Explosive atmospheres • 139

External display • 15

Closed User

brightness • 99

external • 15

icons • 14

language • 81

main • 13

settings • 98

Group • 94

Colour

service light • 41; 99

Command

settings • 100

using • 119

voice • 72

Composing melodies • 75

Conference calls

• See Multiparty calls

Connect

Length of calls • 58; 79

Letters

entering • 44

Line Identification • 93

Locking

Calculator • 105

Calendar • 108

Caller ID • 84

Calls

to Voice Mail • 60

Tone • 79

Conversion • 111

Copying phonebook

entries • 40

Correcting numbers • 24

Cost of calls • 59

CUG • 94

FDN Mode • 97

Fixed Dial Number mode • 97

Functions

phone • 96

SIM card • 97

Low battery indicator • 21

alert types • 40; 77

answering • 27

second call • 33

barring • 89

cost • 59

dialled • 58

selecting • 51

Games • 115

Maintenance • 142

Medical devices • 138

Melody Composer • 75

Memory status • 40

Memos • 72

Graphic Logo • 99

Greeting Message • 80

diverting • 86

emergency • 140

ending • 25

Date setting • 110

Deleting

holding • 32

Menus

international • 24

making • 24

melodies • 77

messages • 62

missed calls • 29

Health • 132

animation • 99

scrolling • 53

Hearing aids • 138

Holding calls • 32

missed • 28; 57

multiparty • 34

skin • 99

structure • 54

148

149

In d e x

M (continued)

R (continued)

S (continued)

Messages • 60

broadcast • 65

greeting • 80

picture • 67

Pacemakers • 137

Password

Redialling

Stopwatch • 114

Switching on/off

microphone • 30

phone • 22

automatically • 83

last number • 25

Rejecting calls • 27

Replaying

voice commands • 72

voice dial tags • 71

voice memos • 73

Reset Settings • 85

Ring Tone • 74

phonebook • 40

Ring Volume • 77

Road safety • 134

Roaming • 92

barring • 131

changing • 90

preset • 64

phone • 129

Symbolic mode • 44; 50

reading • 61

changing • 97

ring tones • 74

setup • 64

Pasting phonebook numbers • 39

Personal Identification Number

• See PIN

T9 mode • 44; 46

Text

tone • 78

voice mail • 60

writing • 63

Phone

entering • 44

input modes • 44

language • 81

Time

layout • 10

lock • 96

password • 97; 129

settings • 80

Microphone mute • 30

Minute Minder • 79

Missed Calls • 29; 57

Multiparty calls • 34

Music box • 74

Mute

setting • 110

world • 109

Timer • 113

To Do List • 107

Tones • 74

connect • 79

error • 79

keypad • 78

message • 78

ring • 40; 74

Travel adapter • 19

switching on/off • 22

Phonebook • 37

copying numbers • 40

deleting recorded names • 39

dialling • 42

Safety

batteries • 133

electronic devices • 137

explosive atmospheres • 139

information • 132; 141

medical devices • 138

operating environment • 137

precautions • 7

road • 134

key tones • 36

microphone • 30

editing numbers • 40

erasing numbers • 40

making calls • 42

memory status • 40

options • 38

Names

entering • 44

searching/dialling • 42

storing • 37

voice dial • 69

Network Selection • 92

Network Services • 86

Numbers

correcting • 24

FDN • 97

information • 43

mode • 44; 50

own • 81

pasting numbers • 39

playing recorded names • 39

ring tones • 40

Scheduler • 101

Searching/dialling

phonebook numbers • 42

Second call • 33

Security Settings • 95

Selecting functions/options • 51

Sending key tones • 36

Service directory • 43

Service Light • 16; 83

colour • 41; 99

searching • 42

User groups • 94

speed-dialling • 41

storing numbers/names • 37

voice recording • 39

Picture Messages • 67

PIN • 130

Voice

command • 72

dial • 69

functions • 69

language • 81

mail

connecting to • 60

server number • 61

memo • 72

server number • 61

Volume

earpiece • 26

keys • 26

ring • 77

changing • 96

checking • 95

redialling • 25

searching/dialling • 42

speed-dial • 41

storing • 37

voice dial • 69

voice server • 61

PIN2 • 130

Settings

changing • 98

alarm • 104

Power On/Off • 78

Preset Message List • 64

Problem solving • 126

PUK • 131

browser • 100

date • 110

LCD/LED • 98

network • 86

PUK2 • 131

phone • 80

Options

phonebook • 38

selecting • 51

Organiser • 101

Own Number • 81

reset • 85

security • 95

Radio-frequencies • 132

Read Messages • 61

Received Calls • 57

Recording

text language • 81

time • 110

Waiting

call • 33; 91

Wallpaper • 98

WAP Browser • 119

World Time • 109

Write Messages • 63

WWW Services • 119

Setup • 64

SIM card

voice commands • 72

voice dial names • 70

voice memos • 73

Records

installing • 17

locking • 97

SMS • See Messages

Soft keys • 51

call • 57

Solving problems • 126

Speed-dialling • 41

150

151

153

Yamaha CD REWRITABLE DRIVE CRW8824S NB User Manual
Tripp Lite U238 000 1 User Manual
Targus ACH110CA User Manual
Seagate BARRACUDA ST3160215AS User Manual
Samsung GT S3650 User Manual
Samsung GH68 05349A User Manual
Samsung Galaxy Tab 2 16GB 101 GT P5113ZWYXAR User Manual
Profile CD Player CD8200 User Manual
Nokia N91 User Manual
Nokia Intellisync 92 User Manual