Samsung Cell Phone User Manual

GPS Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Safety and Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Introduction

This Explore More Guide introduces you to Sprint^®service and the basic features of your new

Samsung Instinct^TM. It’s divided into four sections:

ࡗ

Getting Started

Using Your Device

Sprint Service

Safety and Warranty Information

Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to

help you make the most of your new device and service. The Table of Contents and Index

will also help you quickly locate specific information.

This Explore More Guide is designed to make getting started with your Instinct as easy as

possible.

Go to sprint.com/instinctsupport to access the most recent version of both the User

Guide and Explore More Guide.

Explore

More Note

Please refer to the Important Safety Information section on page 105 to learn about

information that will help you safely use your device. Failure to read and follow the

Important Safety Information in this Explore More Guide may result in serious bodily injury,

death, or property damage.

WARNING

Getting Started

Setting up service on your new device is quick and easy. This section walks you through the

necessary steps to set up and turn on your device, set up your voicemail, establish

passwords, and contact Sprint for assistance with your wireless service.

Setting Up Your Device

1. Remove the battery cover.

Ⅲ Press down with thumbs as indicated below.

Ⅲ While applying pressure, slide cover away from the camera lens (as shown below).

Getting Started

2. Install the battery.

Ⅲ Insert the battery into the opening on the back of the device, making sure the

connectors align (1). Gently press down to secure the battery (2).

Ⅲ Position the battery cover (3) and firmly slide it in until you hear a click (4).

ꢀ

ꢁ

3. Press and hold

to turn the device on.

Unlock Screen

Ⅲ Your device will turn on, search for Sprint service, and then show the unlock screen.

Ⅲ If your device is not yet activated, see “Activating Your Device” on page 4 for more

information.

Getting Started

It is recommended that you Lock your device prior to insertion into the included Leather Carrying

Case (or other related cases) so that you do not accidentally activate any device features. Once

the phone is securely installed into the case, you can then unlock the device

Note

4. Make your first call.

Ⅲ Press

to access the Phone Functions menu.

Ⅲ Touch Dialer (

) and use the onscreen dial pad to enter a phone number.

555-555-1234

Talk

TALK

Ⅲ Touch

. (The phone number appears in the

button.)

Your device’s battery should have enough charge for you to turn your device on and find a signal,

set up your voicemail, and make a call. You should fully charge your battery as soon as possible.

See “Charging the Battery” on page 13 for details.

Note

Activating Your Device

ⅷ If you purchased your device at a Sprint Store, it should be activated and ready to use.

ⅷ If you received your device in the mail and it is for a new Sprint account or a new line of service, your

device is designed to activate automatically when you first turn it on. To confirm your

activation, make a phone call.

ⅷ If you received your device in the mail and you are activating a new device for an existing number on your

account, you will need to contact Sprint to activate your new device. There are two options:

Ⅲ From your computer’s Web browser, go to www.sprint.com/activate and complete the

onscreen instructions to activate your device.

Ⅲ Call 1-888-211-4727 from any other phone to contact Sprint Customer Service for

assistance with activation.

Getting Started

When you have finished, make a phone call to confirm your activation.

Do not press

during activation. Pressing

cancels the activation process.

Tip

If you are having difficulty with activation, contact Sprint Customer Service by dialing

1-888-211-4727 from any other phone.

Note

Setting Up Your Voicemail

All unanswered calls to your phone are automatically transferred to your voicemail, even if

your phone is in use or turned off. Therefore, Sprint recommends that you set up your

voicemail and personal greeting as soon as your phone is activated.

1. Press

to access the Main Functions menu.

2. Touch

> Voicemail.

3. Follow the system prompts to:

Ⅲ Create your passcode.

Ⅲ Record your name announcement.

Ⅲ Record your greeting.

Ⅲ Choose whether to activate One-Touch Message Access (a feature that lets you access

messages simply by pressing the onscreen Voicemail button, bypassing the need for

you to enter your passcode).

Voicemail Passcode

Note

If you are concerned about unauthorized access to your voicemail account, Sprint recommends

that you enable your voicemail passcode. (Do not activate One-Touch Message Access.)

For more information about using your voicemail, see “Visual Voicemail” on page 79.

Getting Started

Getting Help

Sprint Customer Service

From Your Sprint Phone’s Dialer

1. Press

and touch

Talk

2. Use the onscreen dial pad to enter

and touch

From Any Other Phone

ⅷ Sprint Customer Service: 1-888-211-4727.

ⅷ Business Customer Service: 1-800-927-2199.

Sprint 411

Sprint 411 gives you access to a variety of services and information. You can get up to three

pieces of information per call, and the operator can automatically connect your call at no

additional charge.

There is a per-call charge to use Sprint 411, and you will be billed for airtime.

1. Press

and touch

411

Talk

2. Use the onscreen dial pad to enter

and touch

Sprint Operator Services

Sprint Operator Services provides assistance when you place collect calls or when you

place calls billed to a local telephone calling card or third party.

1. Press

and touch

Talk

2. Use the onscreen dial pad to enter

and touch

For more information or to see the latest in products and services, visit us online at

www.sprint.com.

Getting Started

Using Your Device

Device Basics

ࡗ

Your Device (page 8)

Viewing the Display Screen (page 10)

Turning Your Device On and Off (page 11)

Using the Battery and Charger (page 12)

Navigating the Device Screens (page 14)

Entering Text (page 21)

Your device is packed with features that simplify your life and expand your ability to stay connected to the

people and information that are important to you. This section will guide you through the basic

functions and calling features of your device.

Using Your Device: Device Basics

Your Device

1. Earpiece

2. Signal Strength

Indicator

3. Main LCD (display)

4. Main Functions

Key

7. Camera Lens

5. Back Key

6. Phone Functions Key

8. Speaker

9. Headset

Jack

16. Power/Lock Key

10. Accessories/

Power Cable

Jack

15. microSD Slot

11. Volume

Key

14. Speech to

Action Key

13. Camera Key

12. Microphone

Using Your Device: Device Basics

Key Functions

1. Earpiece lets you hear the caller and automated prompts.

2. Signal Strength Indicator represents the signal strength by displaying bars. The more bars

displayed, the better the signal strength.

3. Main LCD (display) displays all of the information needed to operate your device, such as

the call status, the Contacts list, the date and time, and the signal and battery strength.

4. Main Functions Key allows you to access your device’s Main Functions menu, such as

Favorites, Main, Fun, and Web.

5. Back Key returns you to the previous menu. This key also allows you to return to the

previous page in the Web browser during your Sprint Power Vision session.

6. Phone Functions Key allows you to access your device’s Phone Functions menu, such as

Speed Dial, Contacts, History, and Dialer.

7. Camera Lens, as part of the built-in camera, lets you take pictures and videos.

8. Speaker lets you hear the different ringers and sounds. The speaker also lets you hear

the caller’s voice in speakerphone mode.

9. Headset Jack allows you to plug in either a stereo headset (included) or an optional

headset for convenient, hands-free conversations.

CAUTION! Inserting an accessory into the incorrect jack may damage the device.

10. Accessories/Power Cable Jack allows you to connect a power cable or a USB cable.

CAUTION! Inserting an accessory into the incorrect jack may damage the device.

11. Volume Key allows you to adjust the ringer volume or adjust the voice volume during a

call. The volume key can also be used to scroll up or down to navigate through the

different menu options.

12. Microphone allows other callers to hear you clearly when you are speaking to them.

13. Camera Key (

) lets you access the camera and take pictures and videos.

Using Your Device: Device Basics

14. Speech to Action Key (

) activates the Speech to Action function that lets you dial phone

numbers by speaking a name or a phone number.

15. microSD Slot lets you use the microSD™ card to expand the memory of your device. (See

“microSD Card” on page 58.)

16. Power/Lock Key (

) lets you turn the device on or off, end a call, or lock the device.

While in the main menu, it returns the device to the unlock screen and cancels your

input. When you receive an incoming call, press

ringer.

to enter silent mode and mute the

Viewing the Display Screen

Your device’s display screen provides information about your device’s status and options.

This list identifies the symbols you’ll see on your device’s display screen:

shows your current signal strength. (The more lines, the stronger the signal.)

means your device cannot find a signal.

indicates you are “roaming” off the Sprint National Network.

indicates you have new text messages. (It also indicates when you have a missed

call or a voicemail message.)

indicates you have an upcoming alarm event.

indicates Sprint Power Vision (data) service is dormant. (The icon is animated while

service is active.)

indicates your data service connection is active (data is being transferred).

indicates your device is connected to the Sprint 1xRTT data network.

indicates audible ringer volume is set.

Using Your Device: Device Basics

indicates ringer volume is set to Vibrate All.

indicates Silence All mode is set.

indicates battery charge level (icon shown is full).

indicates battery charge level (icon shown is empty).

indicates a battery alert, device will shutdown soon (~20% power remaining).

indicates Bluetooth technology is active and enabled.

indicates the Bluetooth device is connected to a wireless headset.

indicates a connection issue with a paired Bluetooth device.

indicates Bluetooth is actively transmitting or receiving data.

Turning Your Device On and Off

Turning Your Device On

ᮣ

Press and hold the Power/Lock key (

), located at the top

of the device.

Once your device is on, it may display “No Service.” When your

device finds a signal and an available network, you are ready to

begin making and receiving calls.

If your device is unable to find a signal after 5 seconds of

searching, a Power Save feature is automatically activated that

searches for a signal periodically without your intervention. When

a signal is found, your device automatically returns to the unlock

screen. (You can also initiate a search for Sprint service by

pressing any key when your device is turned on.)

Using Your Device: Device Basics

The Power Save feature conserves your battery power when you are in an area where there is no

signal.

Tip

Turning Your Device Off

ᮣ

Press and hold

for two seconds until you see the powering down animation on

the display screen.

Your screen remains blank while your device is off (unless the battery is charging).

Using the Battery and Charger

Use only Sprint-approved or Samsung-approved batteries and chargers with your device.

The failure to use a Sprint-approved or Samsung-approved battery and charger may

increase the risk that your device will overheat, catch fire, or explode, resulting in serious

bodily injury, death, or property damage.

WARNING

These batteries and accessories can be found at Sprint Stores or through Samsung^®; or call

1-866-343-1114 to order. They’re also available at www.sprint.com.

Installing the Battery

ᮣ

See “Setting Up Your Device” on page 2.

Removing the Battery

1. Make sure the power is off so that you don’t lose any stored numbers or messages.

2. Press down on the end of the battery compartment cover (just below the embossed

Samsung logo), slide the cover off, and remove the battery from the device.

Do not handle a damaged or leaking Li-Ion battery as you can be burned.

WARNING

Using Your Device: Device Basics

Charging the Battery

Charge your battery as soon as possible so you can begin using your device.

Keeping track of your battery’s charge is important. If your battery level becomes too low,

your device automatically turns off, and you will lose any information you were just working

on. For a quick check of your battery level, glance at the battery charge indicator located in

the upper-right corner of your device’s display screen. If the battery charge is getting too low,

the battery icon (

) blinks and the device sounds a warning tone.

Always use a Sprint-approved or Samsung-approved charger cable or vehicle power

adapter to charge your battery.

Your Instinct comes with a second battery and a charger for the extra battery, so you’ll always

have a charged battery ready.

Note

Using the Charger

ᮣ

Plug the flat end of the charger into the device’s Accessories/Power Cable Jack and the

other end into an electrical outlet.

Correct

Incorrect

With the Sprint-approved Li-Ion battery, you can recharge the battery before it becomes

completely run down.

Using Your Device: Device Basics

Navigating the Device Screens

The Instinct is a touch-sensitive device which allows you to not only select an onscreen

option with a single touch, but also scroll through long menu lists by simply sliding up and

down through the display with either a stylus or by using your fingertip.

Accessing the Main Screens

When the device is locked and

Power/Lock Key

is pressed, the Instinct

displays the unlock screen.

ⅷ To access the device’s Phone

Functions and Main Functions menus,

you must first press and hold

to unlock the device (as

described at the top of the unlock

screen).

Unlock Screen

The Phone Functions menu is

displayed first.

Main Functions

Phone Functions

To access a menu:

ᮣ

Press

to access the

Phone Functions menus.

– or –

Press

to access the

Main Functions menus.

Menu Tabs

Using Your Device: Device Basics

Scrolling Through Screens

As you navigate through the device, options are presented onscreen as scrollable lists that

allow up or down navigation.

The One Hand Operation of the menus is set to Right Handed by default. See “Changing the One

Hand Operation Setting” on page 18 to change to Left Handed.

Note

To navigate through a scrollable menu:

1. Touch a desired onscreen menu tab (located at the bottom of the screen).

Main Functions

menu tabs

Phone Functions

menu tabs

2. Touch and gently press an onscreen option.

The screen on your device is touch-resistive, which means that when you touch an item to select

it or when you drag your finger to scroll, you have to press down slightly to activate the item. This

helps avoid selecting menus or items unintentionally. You can adjust the touch sensitivity of your

screen through the Settings menu. See “Touch Settings” on page 31 for details.

Tip

The smaller the contact point on your screen, the less pressure required. In this case, touch the

screen with the tip of your finger, your fingernail, or the stylus.

Using Your Device: Device Basics

3. From the available list of options you can either:

Ⅲ Touch and gently press an entry to activate it.

Ⅲ Firmly press and slide your finger up or down the screen to scroll through lists of menu

items. Scrolling on your Instinct requires that your press more firmly on the screen than

the gentle press required to open menu items.

Ⅲ The image on the left below shows how to access the Display menu

(

> Main > Settings).

ꢃ

ꢀ

ꢂ

When scrolling through a list (see illustration on the right above) make sure NOT to tap or press

individual entries on the list. This action will open the list entry.

Tip

Using Your Device: Device Basics

Selecting Items

As you navigate through the screens, you can select any option by pressing it with either your

fingertip or a stylus.

For example, to view your text messages:

ᮣ

Press

and touch Main (

) > Messaging. (If you have any text messages, they are

displayed.)

Displaying the Status Bar

This drop-down screen provides some quick device reference information such as: Date,

Signal Strength, Ringer Status, Battery Charge Status, Power Vision status, as well as new

messages and emails.

1. Touch the top line of the display screen.

Status Bar

2. Touch the popup screen once to close it or wait a few seconds for it to close

automatically.

Using Your Device: Device Basics

Changing the One Hand Operation Setting

The Instinct allows you to configure the Power Search tab on screens such as those that

display your Contacts entries or your music list, to be on either the right or left of the screen.

As an example, when the Right Handed option is selected, the Power Search tab is located along

the right side of the screen (shown in the image on page 19) and Contacts entries are then

selected by pressing their name fields along the left side of the LCD.

Power

tab

1. Press

and touch Main (

) > Settings > General > One Hand Operation.

2. Touch either Right Handed (to place the scrolling zone along the right of the LCD) or Left

Handed (to place the scrolling zone along the left of the LCD).

Using Your Device: Device Basics

Scrolling Through Field Entries

There are several pages where you’ll be asked to make a field selection and then enter a

value by either touching the up/down selection arrows or quickly sliding through these

values by using either your fingertip or a stylus. One such example can be found within the

Alarm page.

1. Press

and touch Main (

) > Clock > Alarm >

2. Touch the Time field and then adjust the hour and minutes values by using either the

up/down input arrows or by quickly sliding over the numbers.

Using Your Device: Device Basics

Detaching Entries

The Instinct allows you to detach an entry from a list and then

either move its location (within that same list) or drag it into the

Trash Bin for deletion.

1. From a screen containing entries, touch and hold an entry.

You will notice that it turns a lighter blue as it detaches from

the list.

2. While still holding the entry, wait until it appears to detach

from the current list and an outline forms over its current

location.

3. Place it in a new location (as with a Speed Dial entry) by

hovering between two existing entries and then releasing it.

– or –

Delete it by dragging the entry over the Trash Bin (

then disappears into the icon.

) and then releasing it. The entry

Using Your Device: Device Basics

Backing Up Within a Menu

To go to the previous menu:

ᮣ

Press

There might be cases where pressing this button will not exit the current menu. In these cases, try

pressing another Functions menu button to “release” the current activity. For example, if you are in

Note

the dialer and pressing

doesn’t send you to the previous menu, press

To return to the unlock screen:

Press to lock the device (turn off the display) and then press

ᮣ

again to

reveal the unlock screen.

To exit out of your current application:

Press or

ᮣ

Entering Text

Selecting a Text Input Mode

Your device provides convenient

ways to enter letters, numbers, and

symbols whenever you are prompted

to enter text (for example, when

adding a Contacts entry or when

using email and text messaging).

1. From a screen where you can enter text, touch the text entry field.

2. From the onscreen keyboard, touch the button (shown above) to change the text input

mode.

Ⅲ Touching

changes the onscreen keyboard orientation between Portrait, Hand

Writing (see the User Guide on the CD), or Landscape views.

Using Your Device: Device Basics

3. Touch one of the following options:

Ⅲ abc to enter alphabetic characters (both uppercase and lowercase) using the keyboard.

Ⅲ 123 !@# to enter numbers or symbols with the keyboard. (See page 22.)

When entering text, touch Caps to change letter capitalization (ABC or abc).

Tip

Entering Text Using ABC Mode

1. Touch the abc button at the bottom right of the onscreen keyboard. (See “Selecting a

Text Input Mode” on page 21.)

2. Enter the desired text using the corresponding keys. Change the case of the alphabetic

characters by touching Caps. (Touch Caps twice for caps lock.)

Ⅲ If you make a mistake, press

to erase a single character.

Ⅲ Press and hold

to erase an entire word or line.

3. Insert a new paragraph by touching

4. When a current letter is capitalized, consecutive letters return to lowercase until the

onscreen Caps key is touched again.

5. Touch Done to complete the text entry.

Entering Numbers and Symbols

1. Touch 123 !@#. When the keyboard displays both numbers and symbols, touch the

appropriate key. (See “Selecting a Text Input Mode” on page 21.)

2. Access additional symbols by touching More.

Ⅲ Touch 123 to return to the Numbers keyboard.

3. Insert a new paragraph by touching

4. Touch abc to return to entering letters.

5. Touch Done to complete the numeric or symbol entry and exit the onscreen keyboard.

Using Your Device: Device Basics

Phone

ࡗ

Displaying Your Phone Number (page 23)

Making and Answering Calls (page 23)

ࡗ

Displaying Your Phone Number

ᮣ

Press

and touch Main > Settings > General > Phone Information. (Your phone number

and other information about your device and account will be displayed.)

Making and Answering Calls

Making Calls

Placing a call from your device is as easy as making a call from any landline phone.

1. Make sure your device is on.

2. Press

and touch Dialer (

3. Enter a phone number using the onscreen dial pad. (If you make a mistake while dialing,

press

to erase the numbers.)

555-555-1234

Talk

TALK

4. Touch

. (The phone number appears in the

button.)

5. In a single motion, touch and slide End Call to the right when you are finished.

To redial your last outgoing call, touch either Redial or access the History page and then touch

the number from the list.

Tip

Using Your Device: Phone

Answering Calls

To answer a call while the device is active:

1. Make sure your device is on. (If your device is off, incoming calls go to voicemail.)

2. Touch Answer to answer an incoming call.

Other options include:

Ⅲ Silent to mute the ringer.

Ⅲ Ignore (touch and slide to the right) to send the call to your

voicemail box.

Your device notifies you of incoming calls in the following ways:

ⅷ The device rings or vibrates.

ⅷ The backlight illuminates.

ⅷ The screen displays an incoming call message.

If the incoming call is from a number stored in your Contacts, the

entry’s name is displayed. The caller’s phone number or picture

may also be displayed, if available.

Using Your Device: Phone

To answer a call while the device is locked:

When the device is locked, neither the screen nor side buttons are

active. This prevents accidental activation of a device feature or

screen.

When you receive an incoming call, your screen illuminates and

indicates the Caller ID information.

If the caller has been previously entered into your Contacts list, the

name, number, and associated photo (if available) will be displayed

as a floating card on the screen.

1. To answer the call, slide this virtual card up towards the

Answer field.

2. To ignore the call, slide this virtual card down towards the

Ignore field.

When your device is off, calls go directly to voicemail.

Note

Ending a Call

ᮣ

In a single motion, touch End Call and slide to the right.

Calling Emergency Numbers

You can place calls to 911, even if your device is locked or your account is restricted.

1. Press

and touch Dialer (

911

2. Enter

and touch

When you place an emergency call, your device automatically enters Emergency mode and

remains in this mode until you manually exit.

Note

For more information about Emergency mode settings and Enhanced 911 (E911) notification,

please see the User Guide on the CD.

Using Your Device: Phone

In-Call Options

To select an in-call option, touch the corresponding onscreen button. The following options

may be available:

ⅷ Mute or Unmute to toggle the onboard microphone’s mute state (on/off).

Ⅲ Touch Mute during a call to mute the microphone.

Ⅲ Touch Unmute to unmute the microphone.

ⅷ On or Off to route the device’s audio through the speaker or through the earpiece.

ᮣ

Move the slider to On to route the device’s audio through the speaker. (You can adjust

the speaker volume using the volume keys on the side of the device.)

ᮣ

Move the slider to Off to use the device’s earpiece.

Because of higher volume levels, do not place the device near your ear during

speakerphone use.

WARNING

ⅷ Add Call to initiate a three-way call.

ⅷ Contacts (

) to display your Contacts list.

) to display the onscreen dial pad where you can choose to Save the current

ⅷ Dialer (

number, End the call, or Cancel the current dialer operation.

ⅷ Press to access a variety of In Call Applications, without ending your current call,

such as:

Ⅲ Contacts, Call History, Messaging, Notes, Calendar, Clock, Calculator, and Phone Info.

Using Your Device: Phone

End-of-Call Options

After you receive or make a call, the device provides you with three end-of-call options:

Ⅲ Redial to dial the last outgoing or received phone number.

Ⅲ Save to store the current phone number into your Contacts list.

If the current number has already been stored to your Contacts list, Save is replaced with

Contacts.

Note

Ⅲ Contacts to go to the corresponding entry in your Contacts list.

ᮣ

Press Done to exit from the end-of-call screen and display the Speed Dial screen.

If no action is taken after a few seconds, the device automatically returns to the Speed Dial

screen.

Using Your Device: Phone

Settings

ࡗ

Sound Settings (page 28)

Display Settings (page 30)

Touch Settings (page 31)

Location Settings (page 32)

Favorites (page 33)

You can customize your device to sound, look, and operate just the way you want it to. This section

describes how to change your device’s settings to best suit your needs. Take a few moments

to review these options and to adjust or add settings that are right for you.

Sound Settings

Ringer Types

Ringer types help you identify incoming calls and messages. You can assign ringer types to

individual Contacts entries, types of calls, and types of messages.

Selecting Ringer Types

Your device provides a variety of ringer options that allow you to customize your ring and

volume settings. These options allow you to identify incoming calls, messages, and other

alerts by the ring.

1. Press

2. Touch an alert type (Voice Calls, Voicemail, Messages, Alarm/Calendar/Timer).

Ⅲ Touch to play a sample of the current ringer.

and touch Main (

) > Settings > Ringers.

Using Your Device: Settings

3. Scroll through the list of available ringers.

Ⅲ Touch

to play a sample of a highlighted ringer.

4. Touch a sound name to assign it.

Activating Voice Notification

This feature will call out a phone number instead of using your assigned ringer.

1. Press

and touch Main (

) > Settings > Ringers.

2. Locate the Voice Notification field.

3. Touch and drag the slider to either On or Off.

Volume Settings

Adjusting the Ringer Volume

1. Press

and touch Main (

) > Settings > Volume & Vibration.

2. Touch and drag the Ringer Volume slider left or right to adjust the volume level.

3. Touch and drag the Always Vibrate slider left or right to turn the feature either On or Off.

4. Once you are done, press

You can adjust the ringer volume (or the earpiece volume during a call) by using the volume key

on the left side of your device.

Tip

Adjusting the System Volume

1. Press

and touch Main (

) > Settings > Volume & Vibration.

2. Touch and drag the System Volume slider left or right to adjust the volume level.

Using Your Device: Settings

Adjusting Other Volume Settings

1. Press

and touch Main (

) > Settings > Volume & Vibration.

2. Touch and drag the corresponding sliders left or right to turn the feature either On or Off.

Ⅲ Choose from: Touch Vibrate, Touch Tone, and Startup & Shutdown.

3. Once you are done, press

Silence All

Activating Silence All allows you to mute all sounds without turning your device off.

Press and hold the volume key down until Silence All appears onscreen.

To deactivate Silence All:

Press and hold the volume key up repeatedly to select a new volume level.

ᮣ

Display Settings

Backlight

Select how long the display screen remains backlit and time until it turns off after any action.

To set the backlight dim time:

1. Press

and touch Main (

) > Settings > Display > Dim.

2. Touch a time setting.

Long backlight settings reduce the battery’s talk and standby times.

Note

To set the backlight deactivation time:

1. Press and touch Main (

) > Settings > Display > Off.

2. Touch a time setting.

Using Your Device: Settings

Background

Choose what you see on the screen while powering on or off and when in the unlock screen.

1. Press

and touch Main (

) > Settings > Display.

2. Touch the Background field.

3. Choose a source for your new image by touching the corresponding onscreen button.

(A list of available images will be displayed.)

Ⅲ Choose from: Take Picture, Preset Images, My Photos, or Downloads.

4. Scroll through the images by sliding your fingertip or stylus across the screen.

5. With the selected image onscreen, touch Assign.

Brightness

Adjust your screen’s brightness to suit your surroundings.

1. Press

and touch Main (

) > Settings > Display.

2. Touch and drag the slider left or right to adjust the brightness level.

Touch Settings

Touch Sensitivity

The Instinct's touch screen requires a small amount of pressure to operate. The smaller the

size of your contact point on the screen, the less the amount of pressure required. The tip of

your finger will work better than the pad of your finger, and a fingernail or stylus will require

even less pressure. Initially, your device's sensitivity is set to its highest level. Once you have

discovered your preferred method for operating your touch screen, you may find that it is too

sensitive for some applications. You can adjust how sensitive the device is to touch actions

on the screen.

Using Your Device: Settings

1. Press

and touch Main (

) > Settings > General > Touch Sensitivity.

2. Touch and drag the slider left or right to adjust the sensitivity level.

Ⅲ Touch the onscreen Touch Here button to gauge the response of the new sensitivity level.

3. Once you are done, touch Done.

Screen Calibration

Use this menu to re-align the screen’s touch accuracy. This should only be done if the device

does not appear to be responding properly to onscreen touches.

1. Press

and touch Main (

) > Settings > General > Calibration.

2. Touch OK and follow the onscreen instructions.

For this calibration process to complete successfully, it is recommended that you use the

stylus to accurately set the new calibration touch points.

Important

Location Settings

Your device is equipped with a Location feature for use in conjunction with location-based

services. The Location feature allows the network to detect your position. Turning Location off

will hide your location from everyone except 911.

Turning Location on will allow the network to detect your position using GPS technology, making

some Sprint applications and services easier to use. Turning Location off will disable the GPS

location function for all purposes except 911, but will not hide your general location based on the

cell site serving your call. No application or service may use your location without your request or

permission. GPS-enhanced 911 is not available in all areas.

Note

Using Your Device: Settings

To enable your device’s Location feature:

1. Press and touch Main ( ) > Settings > General.

2. Touch and move the Location slider to On. Read the disclaimer and touch OK.

Ⅲ Move the Location slider to Off to disable this feature.

3. Once you are done, press

Favorites

Your device offers you the option of assigning up to 12 shortcuts to favorite or often-used

functions. You can use the

function to quickly launch your personally designated

shortcuts.

ᮣ

Press

and touch Favs ( ).

To add an application as a Favorite Function:

1. Touch the onscreen Tap to add button.

2. Touch Application and choose from one of the following category types: Main, Fun, or Web.

3. Touch an application from one of these three category functions to add it to the Favorites

page.

4. Repeat this process to add other functions such as Music Playlist, Send Message/Email, Web

Bookmarks, TV Channels and Radio Station.

Using Your Device: Settings

Security

ࡗ

Using the Lock Feature (page 34)

Resetting Your Device’s Settings (page 35)

Resetting Your Device (page 35)

By using the security settings on your device, you receive peace of mind without sacrificing flexibility. This

section will familiarize you with your device’s security settings. With several options available,

you can customize your device to meet your personal needs.

Using the Lock Feature

Locking Your Device

When your device is locked, your screen turns off. Regaining access requires entering a lock

code.

1. Press

and touch Main (

) > Settings > Lock.

2. Touch and drag the Auto Lock slider to the On position.

3. Read the onscreen information and touch OK.

4. Press

to return to the previous screen.

Unlocking Your Device

1. Press

to turn the device on.

2. Enter your lock code.

Using Your Device: Security

Changing the Lock Code

1. Press

and touch Main (

) > Settings > Lock > Change Lock Code.

2. Use the onscreen dial pad to enter your new lock code and touch Done.

3. Re-enter your new lock code and touch Done.

Resetting Your Device’s Settings

Resetting the device restores all of the factory defaults, including the ringer types and display

settings. Onboard data such as Contacts, History, Scheduler, and Messaging are not

affected.

1. Press

displayed.)

and touch Main (

) > Settings > Reset > Reset Settings. (A disclaimer is

2. Read the disclaimer and touch Proceed.

3. Use the onscreen dial pad to enter the lock code provided on the disclaimer.

4. Touch Done to restore all factory settings.

Resetting Your Device

Resetting the device restores all of the factory defaults, including the ringer types and display

settings and deletes all content stored on the phone.

1. Press

displayed.)

and touch Main (

) > Settings > Reset > Reset Phone. (A disclaimer is

2. Read the disclaimer and touch Proceed.

3. Use the onscreen dial pad to enter the lock code provided on the disclaimer.

4. Touch Done to restore all factory settings.

Using Your Device: Security

History

ࡗ

Viewing History (page 36)

History Options (page 37)

Making a Call From History (page 38)

Saving a Phone Number From History (page 39)

History keeps track of incoming calls, outgoing calls, and missed calls. This section guides you

through accessing and making the most of your History.

Viewing History

History is a list of up to 240 (80 incoming, 80 outgoing, and 80 missed) phone numbers (or

Contacts entries) for calls you placed, accepted, or missed. History makes redialing a

number fast and easy. It is continually updated as new numbers are added to the beginning

of the list and the oldest entries are removed from the bottom of the list.

When you place, accept, or miss a call, a

record of the call is saved in the History list.

When you view the numbers in the History list,

an icon to the left of the number indicates the

Missed Call

call type:

Ⅲ Missed: Indicates any missed calls.

Received Call

Ⅲ Received: Indicates any received calls that

were answered.

Dialed Call

Ⅲ Dialed: Indicates all outgoing calls made

from your device.

Each entry contains the phone number (if it is available) and Contacts entry name (if the

phone number is in your Contacts). Duplicate calls (same number and type of call) may only

appear once on the list.

Using Your Device: History

To view History:

1. Press

and touch History (

2. Scroll through the list to locate specific calls.

History records only calls that occur while the device is turned on. If a call is received while your

device is turned off, it will not be included in the device’s history.

Note

If you return a call from the voicemail menu, it will not be included in your device’s history.

History Options

1. Press

and touch History (

2. Touch

to display an entry’s options.

An unknown entry only displays a contact number.

Tip

3. If the entry is not currently part of your Contacts list, touching

reveals the following

options:

Ⅲ Save lets you store the entry into your Contacts list.

Ⅲ Call dials the phone number for the entry.

Ⅲ Message lets you send a text message to the entry.

Ⅲ History provides a specific call history list for the current entry.

A known entry (found within the Contacts list) is shown with the entry name and contact number.

Tip

Using Your Device: History

4. If the entry has been previously

entered into your Contacts list,

touching

options:

reveals the following

Edit Entry Button

Ⅲ Caller’s name (if the number is

already in your Contacts).

Send New Text Message

Buttons

Ⅲ Edit Entry (

) lets you either edit

the number (if already in your

Contacts list) or create a new entry.

Contact’s History Button

Send Contact Info via

Bluetooth Button

Ⅲ Send New Text Message (

send a text message to the entry.

) lets you

Ⅲ <Name’s> history provides a specific

call history list for the current entry.

Ⅲ Send Contact delivers the current

history entry information to an

available user via a wireless Bluetooth connection. See “Bluetooth” on page 74.

Making a Call From History

1. Press

and touch History (

2. Touch an entry’s name or number.

You cannot make calls from History to entries identified as No ID or Restricted.

Note

Using Your Device: History

Saving a Phone Number From History

Saving a New Number from History

1. Press

and touch History (

2. Touch

3. Touch Save.

4. Follow the onscreen prompts to save the new entry.

5. Touch Done to save the new entry.

You cannot save phone numbers already in your Contacts or from calls identified as No ID or

Restricted.

Note

Using Your Device: History

Contacts

ࡗ

Adding a New Contacts Entry (page 40)

Saving a Phone Number (page 42)

Finding a Contacts Entry and Making a Call (page 43)

Contacts Entry Options (page 44)

Deleting Contacts Entries (page 46)

Assigning Speed Dial Entries (page 46)

Assigning a Ringer Type to an Entry (page 48)

Sprint Mobile Sync (page 49)

Your device’s Contacts list helps you stay in touch with family, friends, and colleagues by keeping track of all

their contact information. This section explains how to use your device’s Contacts list.

For more information about Contacts options, see the User Guide on the CD.

Adding a New Contacts Entry

Your device can store up to 600 Contacts entries. Contacts entries can store up to a total of

4200 phone numbers, and each entry’s name can contain 64 characters.

1. Press

and touch Contacts (

2. Touch

in the upper-left corner to begin creating a new Contacts entry.

3. Touch the Enter Name field, use the onscreen keyboard to enter a name, and press Done.

(See “Entering Text” on page 21.)

4. Touch the Add Number field, use the onscreen numeric key pad to enter a phone number,

and press Done.

5. Touch a label for the number (Mobile, Home, Work, Pager, or Others).

Using Your Device: Contacts

6. Use your fingertip to scroll up and down the screen and touch any of the remaining

fields to update their information and press Done. Available fields include:

Ⅲ <image icon> to assign a picture to the entry. Choose an option to select a picture:

●

Take Picture to use the camera to take a new picture and assign it to this entry.

●

My Photos to retrieve a previously stored image from your My Photos folder and

assign it to this entry.

●

Downloads to access the Downloads folder and choose and assign a previously

downloaded image.

Ⅲ Add Number to add a phone number to the entry.

Ⅲ Add Email to add an email address to the entry.

Ⅲ Enter Address to add a mailing address to the entry. (Capitalize the two character

abbreviation for the state in the mailing address so that it can be recognized by

applications other than those on your Instinct.)

Ⅲ Set Ringer to assign a custom ring tone to the entry. This custom ring tone will be played

when an incoming call from this entry is announced.

Ⅲ Enter URL to add a Web site’s URL to the entry.

Ⅲ Enter Memo to add a note, street address, or other information.

7. Touch Done to save the entry. Once saved, the new entry is displayed within the Contacts

page. (See “Contacts Entry Options” on page 44.)

ICE – In Case of Emergency

Tip

To make it easier for emergency personnel to identify important contacts, you can list your local

emergency contacts under “ICE” in your device’s Contacts list. For example, if your mother is your

primary emergency contact, list her as “ICE–Mom” in your Contacts list. To list more than one

emergency contact, use “ICE1–___,” “ICE2–___,” etc.

You can transfer all of your contacts from your old phone to your Instinct. See “Transferring

Contacts” on page 64.

Note

Using Your Device: Contacts

Saving a Phone Number

To save a number from the unlock screen:

1. Press

to unlock your device.

and touch Dialer ( ).

2. Press

3. Enter a number and touch Save.

4. Touch either New Contact or Existing Contact.

5. Touch a label (Mobile, Home, Work, Pager, Others).

6. Touch the Enter Name field and use the keyboard to enter the new contact name.

7. Touch Done to store the new name.

8. Enter information into any of the other desired fields by using the keyboard/dial pad.

9. Touch Done to save the new entry.

To save a number from the end-of-call screen:

After you have received or made a call, the device displays end-of-call options.

1. Touch and slide End Call to the right to end the current call.

2. Touch Save.

3. Follow the onscreen prompts to save the number.

4. Touch Done to save the new entry.

Using Your Device: Contacts

To save a number from the History screen:

1. Press

and touch History (

2. Touch

adjacent to an entry.

3. Touch Save.

4. Follow the onscreen prompts to save the number.

5. Touch Done to save the new entry.

Finding a Contacts Entry and Making a Call

You can find a Contacts entry in the alphabetical listing of the names in your Contacts.

Follow the steps below to find Contacts by name.

1. Press

and touch Contacts (

2. Scroll through the list (up/down) until you find your entry.

3. Touch the name you want to call from the list..

Power

tab

Using Your Device: Contacts

Contacts Entry Options

To access the Contacts entry's options page:

1. Press

and touch Contacts (

2. Touch an entry to display its available options page where you can edit the Contacts

entry, send a new text message, view specific calling history or share information via

Bluetooth.

Edit Entry Button

Send New Text Message

Buttons

Contact’s History Button

Send Contact Info via

Bluetooth Button

Editing a Contacts Entry

1. From the options page, touch

to edit the Contacts’ entry information.

2. Touch a field and make changes to the information on this page.

3. Touch Done to save the new updates. See “Adding a New Contacts Entry” on page 40.

Using the Phone Number Options

1. From the options page, touch

to access the New Text Message screen where you

can begin sending an SMS text message to a selected phone number.

2. Follow the onscreen instructions.

Using Your Device: Contacts

Reviewing a Contacts’ Calling History

ᮣ

From the options page, touch the contact’s history button to view a list of those calls and

text messages made and received from this entry.

Ⅲ This history list is specific to this entry and includes calls and text messages to and

from all phone numbers used by this entry.

Sending Contact Information via Bluetooth

Prior to using this feature, Bluetooth must first be enabled (

and Off” on page 74.

). See “Turning Bluetooth On

1. From the options page, touch the Send Contact button to begin searching for any visible

and available Bluetooth device within your communication range.

2. Touch an available Bluetooth device entry from the list.

To be detected by the Instinct, an external Bluetooth device must be both active and visible.

Note

3. Touch Send to begin the upload process. Follow the onscreen instructions. See

“Bluetooth” on page 74.

4. The recipient must then accept the incoming contact card.

Ⅲ Accepting places a copy of the incoming entry into their Contacts entry list.

Using Your Device: Contacts

Deleting Contacts Entries

To delete selected Contacts entries:

1. Press

and touch Contacts (

2. Touch (

) to open the Delete menu.

3. Touch any Contacts entries you wish to delete. Selected entries are highlighted in blue.

Delete Selected

4. Touch and drag

to the right.

Individual entries can also be deleted by touching and holding it until it detaches from the list,

dragging it over the Delete icon, and then lifting your finger off the screen to release it into the

Trash Bin.

Note

Assigning Speed Dial Entries

Your device can store up to 99 phone numbers within the Speed Dial list.

Only phone numbers that are stored in Contacts can be added to the Speed Dial list.

Note

You can also rearrange existing speed dial entries to appear in any desired order within the

Speed Dial list. (See the User Guide on the CD for more details.)

To add a phone number to the speed dial list:

1. Press

. The Speed Dial (

) screen appears by default.

or the onscreen Tap to add button.

2. To begin adding an existing number, touch either

3. Use your fingertip to scroll through the available list of Contacts entries.

Using Your Device: Contacts

4. Touch the name of a Contacts entry.

Ⅲ The Assign a Speed Dial page then displays a list of available Contacts entries from which

you can then select a desired phone number.

Available Number

Choices

5. Touch

to select a phone number and assign it to an available location on the

Speed Dial list.

Ⅲ The icons to the left of the phone number correspond to their previously selected label.

Ⅲ Although the same name will appear in the Speed Dial list, the icon adjacent to the

entry’s name indicates which phone number was assigned.

Finding Speed Dial Numbers

1. Press

. The Speed Dial (

) screen appears by default. See “Assigning Speed Dial

Entries” on page 46.

2. Scroll down through speed dial entries by sliding your fingertip up or down.

Ⅲ Speed dial numbers are displayed in the order in which they were added but can be

reorganized to appear in any order.

3. Touch the entry to dial the entry’s default phone number.

Using Your Device: Contacts

Assigning a Ringer Type to an Entry

Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type.

(See “Ringer Types” on page 28.)

1. Press

and touch Contacts (

2. Touch an entry and touch

3. Scroll through the page by sliding your finger up and down on the screen until you

locate the Set Ringer field.

4. Touch the entry within the Set Ringer field and scroll through the list of available ringer

sounds.

Ⅲ Touch

to play samples of selected ringers.

5. Touch a ringer name to assign it.

6. Touch Done to save the new ringer type.

Using Your Device: Contacts

Sprint Mobile Sync

All of your contacts can be added and edited online using the Sprint Mobile Sync service.

With Sprint Mobile Sync you can:

ⅷ Synchronize and back up your contacts. Save all the contacts information from your device

in a secure location and automatically synchronize new information from the computer to

the device and from the device to the computer.

ⅷ Transfer contacts to a new phone. When you activate a new device, your existing contacts

information is sent to the device upon activation.

ⅷ Erase contacts information from a lost device. If your device is lost or stolen, you can use

Sprint Mobile Sync to remotely remove all the contacts information. You can then send the

information to your replacement device.

ⅷ Import and export contacts with online address books. Import or export contacts

information from or to your Outlook or other compatible database.

Activating Sprint Mobile Sync

To activate Sprint Mobile Sync:

1. Press

and touch Main (

) > Settings > Mobile Sync.

2. Touch and drag the slider to the On position.

Accessing Sprint Mobile Sync Online

1. Sign on to your My Sprint page at www.sprint.com.

2. Click My Online Tools > Sprint Mobile Sync.

3. Follow the onscreen instructions to add, edit, and manage all of your contact information.

You can transfer all of your contacts from your old phone to your Instinct. See “Transferring

Contacts” on page 64.

Note

Using Your Device: Contacts

Calendar

ࡗ

Adding an Event to the Calendar (page 50)

Event Alert Menu (page 52)

ࡗ

Your device is equipped with several personal information management features that help you manage

your busy lifestyle. This section shows you how to use these features to turn your device into a

time management planner that helps you keep up with your contacts, schedules, and

commitments.

Additional details about Calendar and other tools such as Alarm Clock and Calculator can

be found in your device’s User Guide on the CD.

Adding an Event to the Calendar

Your Calendar helps you organize your time and reminds you of important events.

1. Press

2. Select the day to which you would like to add an event by touching a day on the

calendar. Touch or to view a different month and then touch a day.

3. Touch to open the New Event window.

and touch Main (

) > Calendar.

4. Touch Enter Title to create a new title for the event.

Ⅲ Enter the event title and touch Done to save the title.

5. Select a start and end time for the event by touching the Start and End fields.

Using Your Device: Calendar

6. Assign an hour and minute by either:

Ⅲ Scrolling through both reels (hour and minute) by

sliding your finger up and down on the screen.

– or –

Touching the arrows above or below each field.

Touching and holding down on the arrows (up or down)

increases the speed at which the numbers scroll through

each reel.

Tip

Ⅲ Drag the slider to AM or PM.

Ⅲ Once you are done setting the times, touch Done.

7. Select an alert time for the event by touching the Alert

field and selecting an option.

8. Select a repeating status for the event by touching

the Repeat field and selecting an option.

9. Select a ringer type for the alarm by touching Set Ringer.

Ⅲ Touch

to play a sound sample for a selected ringer.

Ⅲ If a ringer has been previously selected, scroll through the list of available ringer sounds

and touch a ringer name to reassign it.

10. Touch Call Reminder to associate a Contacts entry with the event.

Ⅲ Scroll through the Contacts list and touch an entry to select it.

11. Touch Save to save the new event.

Using Your Device: Calendar

Event Alert Menu

When your device is turned on and you have an event alarm scheduled, your device alerts

you and displays the event summary. By default, the alarm will sound ten minutes before the

event, and then again on the event. There are several ways your device alerts you to

scheduled events:

ⅷ By playing the assigned ringer type.

ⅷ By illuminating the backlight.

To silence the alarm and reset the schedule, touch the onscreen Dismiss button. (You can

also silence the alarm by pressing the side volume key.)

To view additional options, press the appropriate onscreen button:

ⅷ View displays the event detail screen.

ⅷ Dismiss silences the alarm and replays it again at the time of the event.

Using Your Device: Calendar

Speech to Action

ࡗ

Running the Tutorial (page 53)

Making a Call (page 54)

Sending a Message (page 55)

Launching an Application (page 57)

Speech to Action Settings (page 57)

Your device’s Speech to Action feature lets you place calls using your voice directly from your device. This

section includes easy-to-follow instructions for using voice-activated dialing.

The Speech to Action feature will not launch if you are currently in an active menu. It will

only function if you are in the Phone Functions menu, or Main Functions menu.

Important

Running the Tutorial

Speech to Action automatically plays an audio tutorial the first time you access the feature.

Any time you wish to replay the tutorial, follow these instructions.

1. Press and hold

(located on the right of the device).

2. Touch Tutorial.

Using Your Device: Speech to Action

Making a Call

Calling Contacts Entries

1. Press

on the side of your device. You will hear a prompt.

2. Say “Call” followed by the name and the label for the phone number you wish to call. For

example, say “Call John Mobile.” The device dials the phone number stored for the contact

“John” with the label “Mobile.”

Ⅲ If the location is not recognized or the name does not have a phone number stored in

Contacts, your device will play the message “No match found,” and then return you to the

previous screen.

Ⅲ If a name has only a single number, or if you know the name but are not sure which

number to call, say “Call” followed by the name only. If the name is recognized and

there is only one number for the name, your device immediately places the call.

Ⅲ If there are multiple numbers stored for the contact, the device prompts you with “Which

Number?” and displays a list of options. You can select an option by saying it or by

touching the corresponding phone number onscreen.

If the device does not hear a command within approximately eight seconds, it deactivates

Speech to Action without taking any action.

Note

Calling Phone Numbers (Digit Dialing)

1. Press

on the side of your device. You will hear a prompt.

2. Say “Call” followed immediately by a 10-digit phone number, for example, say “Call 555

555 5555.”

Using Your Device: Speech to Action

3. If the correct number is repeated, say “Yes” to dial the number.

Ⅲ If the number is not recognized, the device will play the message “Did you say call?”

Ⅲ If the announced number is not correct, either say “Yes,” “No,” or “Cancel.” When the

correct number is announced, say “Yes” to dial the number.

Speak naturally and clearly and remember to speak one digit at a time—1-800 should be

pronounced “One Eight Zero Zero.”

Sending a Message

Use a single voice command to launch messaging on your device and specify a recipient

for the message.

To send a text message:

1. Press

2. Say “Send Text to.”

3. Say the name or phone number of the recipient. For example, say “John Smith” or

“9725551212.” The entry information for the specified contact is displayed.

If a name contains multiple numbers and you do not specify the number type (work, mobile, etc.),

your device chooses the mobile number by default.

Note

4. If the device did not properly recognize the command, it prompts you with “Did you say,

send text to...”

5. Respond by saying one of the following: Yes, No, Repeat, or Cancel.

6. Use the device’s onscreen keyboard to enter the text and touch Done.

7. Touch Send to complete the process.

Using Your Device: Speech to Action

To send a Picture Mail message:

1. Press

2. Say “Send Picture to.”

3. Say the name or phone number of the recipient. For example, say “John Smith” or

“9725551212.” The entry information for the specified contact is displayed.

4. If the device did not properly recognize the command, it prompts you with “Did you say,

send picture to...”

5. Respond by saying one of the following: Yes, No, Repeat, or Cancel.

To use this service, Sprint Picture Mail must be a part of your Sprint account plan.

Note

6. Touch the location of the picture you wish to send with the outgoing Picture Mail

message by touching the associated button (Text Only, Camera Album, Saved Album, or

<name> Album).

Ⅲ Follow the onscreen prompts to select a picture and then attach it to the new Picture

message.

7. Touch the text field and use the onscreen keyboard to enter text into either the Subject or

Text fields.

8. Once complete, touch Done.

9. Touch Send to complete the process.

Using Your Device: Speech to Action

Launching an Application

Open an application or access a menu by saying “Go To” followed by the name of the

application or menu.

To see a list of possible choices:

1. Press

2. Say “Go To.” A list of valid destinations is displayed and you are prompted with “Which

shortcut?”

Ⅲ If the list is too long to fit on one screen, you can say the name of a destination.

Ⅲ Examples can include: Traffic, Weather, Movie, Sports, News, and Search.

3. Say the name of the application you want the device to activate.

Speech to Action Settings

To configure the voice settings:

1. Press

2. From the “Say a Command” page, touch Settings.

From the Settings page you can configure the verbal Confirmation, activate the training

mode (Adaptation), configure the modes (Expert/Prompt/Readout), or get information about

the software.

The Adaptation option allows you to personalize the service to recognize your voice, especially if

you have a heavy accent or other unusual voice characteristics. ONLY use the Adaptation mode if

the system is frequently misrecognizing your speech. You can always restore the system to its

original factory setting.

Note

Using Your Device: Speech to Action

microSD Card

ࡗ

Using Your Device’s microSD Card and Adapter (page 58)

Accessing the microSD Card via Computer (page 60)

Connecting Your Device to Your Computer (page 61)

Your device lets you use a microSD^TMcard and adapter to expand the available memory space. This highly

secure digital card enables you to exchange images, music, and data between

SD-compatible devices.

This section details the features and options of your device’s microSD functionality.

Using Your Device’s microSD Card and Adapter

Using the microSD Card

Your device is equipped with an installed 2GB microSD (Secure Digital) memory card and its

adapter to expand the device’s available memory space. It allows you to store images,

videos, music, and voice data in your device.

The Camera and Music features require that you must have microSD card installed.

Although the Instinct comes with a pre-installed 2GB card, it can support microSD cards

of up to 8GB.

Important

Using Your Device: microSD Card

Removing the microSD Card

If you need to remove the microSD card for any reason, such as to transfer images to another

device or replace the card, follow these instructions. For details about installation, please see

the User Guide on the CD.

1. Flip up the microSD plastic cover on the right side of the device.

2. Firmly push the end of the card further into the device and release—the card should pop

out from the memory card slot. If this does not work, repeat this process.

The microSD card and its adapter can be easily damaged by improper operation. Please be

careful when inserting, removing, or handling them.

Note

DO NOT remove a microSD card while files are being accessed or transferred. Doing so will result

in loss or damage of data.

Make sure your battery is fully charged before using the microSD card. Your data may become

damaged or unusable if the battery runs out while using the microSD card.

Using Your Device: microSD Card

Accessing the microSD Card via Computer

The microSD card can be accessed via the Sprint Media Manager™ or directly via your

computer (see “Connecting Your Device to Your Computer” on page 61).

Ⅲ Sprint Media Manager is a software application that allows you to conveniently manage

your multimedia files (music, pictures and videos), create playlists, and quickly access

the Sprint Music Store.

● This software package (available on the CD-ROM) also installs the device drivers

necessary to access the internal microSD card via a USB connection.

Ⅲ Computer provides access to the contents of the internal microSD card as if it were any

other external storage device.

The USB drivers (available on the CD-ROM) must be installed before connecting the

Instinct to your computer. These drivers can be installed by itself as part of the Sprint Media

Manager installation. Failure to install these drivers can cause your Instinct to not function

with your computer. (See “Important Connection Information” on page 63.)

Important

Using Your Device: microSD Card

Connecting Your Device to Your Computer

Before using your device’s mass storage capabilities, you must first install the USB driver to

your computer from the CD-ROM that came with your device.

1. Connect one end of the included USB

cable to an available USB port on your

computer.

2. Plug the other end of the included USB

cable into your Accessories/Power

Cable Jack located on the side of the

device. (Wait for the connection to be

completed. When connected, your

computer will automatically detect your

device.)

Correct

Incorrect

3. Click the My Computer icon on the

Windows desktop, and double-click

the newly created drive letter (which

may appear as an icon or text, depending on your View settings).

Ⅲ The default folders that appear are:

●

DCIM is the default location for pictures and videos taken by the device.

Media is the default location for both downloaded content and sideloaded videos.

Music is the default storage location for downloaded and sideloaded music files

managed by the Sprint Media Manager. This location can also contain playlists.

●

Others provides a separate storage area for data files and other miscellaneous

information.

4. Double-click any folder to reveal the contents of the microSD card.

Using Your Device: microSD Card

Transferring Data Directly to the microSD

The microSD card can be accessed and used just as easily as any other communicating

storage device.

1. From your Desktop, double-click My Computer > <Device Letter> entry to display the folders

and files available on the internal microSD card.

2. Open a folder and begin the transfer process of files from your computer to the microSD

card’s target folder.

To remove the connection:

ᮣ

When you have finished transferring data, click the USB device icon on your computer’s

taskbar, and follow the onscreen instructions to safely unplug the USB cable.

Creating Folders in the microSD Card

1. From your Desktop, double-click My Computer > <Device Letter>.

2. Right-click and select New > Folder.

Do not alter or delete the four default folders. These are used by the Instinct to sort the

different file formats and contents.

WARNING

Formatting the microSD Card

Formatting a microSD card permanently removes all files stored on the card.

1. From your Desktop, double-click My Computer > <Device Letter>.

2. Right-click and select Format. (A warning will be displayed.)

3. If you are sure you wish to remove all the files from your microSD card, follow the

onscreen instructions.

Using Your Device: microSD Card

The formatting procedure erases all the data on the microSD card, after which the files CANNOT

be retrieved. To prevent the loss of important data, please check the contents before you format

the card.

Note

When a formatted card is inserted into (or detected by) the Instinct, the four default folders will be

created.

Important Connection Information

ⅷ The USB drivers (available on the CD-ROM) must be installed before connecting the

Instinct to your computer. Failure to install these drivers can cause your Instinct to not

function with your computer.

ⅷ To avoid loss of data, DO NOT remove the USB cable, the microSD card, or the battery

while files are being accessed or transferred.

ⅷ DO NOT use your computer to change or edit folder or file names on the microSD, and do

not attempt to transfer large amounts of data from the computer to the microSD card.

Doing so may cause the microSD card to fail.

ⅷ DO NOT turn off or restart your computer, or return to the unlock screen, while using a

mass storage device. Doing so will result in loss or damage of data.

ⅷ While your device is connected to the computer, your device’s screen will display “Phone

Off.” You cannot make or receive calls while your device is using an active USB

connection.

ⅷ If you connect a mass storage device to a peripheral device, your device may not work

properly.

Using Your Device: microSD Card

Transferring Content to Your Device

ࡗ

Transferring Contacts (page 64)

Transferring Music, Pictures, and Videos (page 66)

Transferring Other Previously Purchased Content (page 68)

Transfer contact information, music, pictures, videos, and other previously purchased content

such as ringers from your old phone to your Instinct.

Transferring Contacts

All of your contacts from your old phone can be transferred to your device:

At the Store — Where you purchase your Instinct, the sales person can help you transfer your

contacts over to the device.

Wireless Backup and Sprint Mobile Sync — If you subscribed to Wireless Backup or Sprint Mobile

Sync service with your previous Sprint phone, your contacts will appear on your device.

Ⅲ Mobile Sync is available on all EVDO Rev. A devices, which is the newer, faster EVDO

technology, and Wireless Backup is only available on EVDO Rev. 0 devices. When you

activate your new device, you will be prompted to activate Sprint Mobile Sync. If you

subscribed to Wireless Backup for your old device, once you activate Sprint Mobile

Sync, your contacts within Wireless Backup will then sync to your new device. (If you

cancel Sprint Mobile Sync instead of activating the service, your contacts on Wireless

Backup will be deleted.)

Bluetooth — Use the Bluetooth capabilities of your old phone to transfer all of your contacts to

the device.

Using Your Device: Transferring Content

Transfer Contacts With Bluetooth

To set up your old phone and the Instinct to transfer contacts:

1. Turn on your old phone and then activate the Instinct.

2. Activate Bluetooth on your old phone and set visibility to Always Visible.

3. Press

device.

and touch Main (

) > Settings > Bluetooth to activate Bluetooth on your new

4. Touch and drag the Bluetooth slider to the On position.

5. Touch Visibility and set your Bluetooth visibility to Always Visible.

To pair the two devices and send contacts to your Instinct:

1. On your Instinct, press

and touch Main (

) > Settings > Bluetooth > Trusted Devices.

2. Touch in the upper-left corner to search for the old phone.

3. Select the previous phone by touching its name.

4. Enter a PIN of ‘0000’ and touch Done.

5. On your old phone, go to the Bluetooth function that allows you to send all of your

contacts to the trusted device. (Consult your User Guide on the CD for device

instructions.)

6. Select all of your contacts to send them all.

7. Send the contacts.

8. On the Instinct, touch Yes to accept the incoming contact information.

To confirm that contacts have been transferred:

1. Press

and touch Contacts (

) to view the transferred contacts.

2. Once you have confirmed that the contacts are transferred, turn off your old device.

Using Your Device: Transferring Content

To turn Bluetooth off:

1. Press and touch Main (

) > Settings > Bluetooth.

2. Touch and drag the slider to the Off position.

3. To return to the Main Functions menu, press

Where you purchased the Instinct, Sprint store associates can quickly and easily transfer your

contacts for you.

Tip

Transferring Music, Pictures, and Videos

There are two ways you can transfer music and videos you have previously purchased to

your device. You can also transfer pictures using Sprint Media Manager.

Ⅲ Sprint Music Store — Transfer songs you purchased from the Sprint Music Store to your

device.

Ⅲ Sprint Media Manager — Use Sprint Media Manager software to transfer songs, pictures,

and videos from your computer to your device.

To transfer songs purchased from the Sprint Music Store:

1. Press

and touch Fun (

)> Web Sync.

) > Music >

My Music

2. Touch Options (

Your device will go through a 5-step process of delivering all previously purchased

Sprint Music Store songs to your device. (Depending on the number of songs you have

purchased, this could take several minutes.)

3. Once sync is complete, touch

> All Songs. (Songs just delivered to your device

My Music

appear in italics.)

4. Touch one of the songs displayed in the list.

Using Your Device: Transferring Content

5. Follow the onscreen prompts to complete the download of the songs you have selected

by touching Download Song. (You can download all of the songs by touching Download All.

Depending on the number of songs you’ve purchased, this could take a few minutes.)

6. Once download of the song(s) is complete, follow the onscreen prompts to Play this Song

or Add to Playlist.

To transfer songs, pictures, and videos from your computer with Sprint Media Manager:

1. You must first install Sprint Media Manager software on your computer.

2. Insert the Sprint Media Manager software CD into the CD drive of your computer.

3. Follow the onscreen prompts to install the software.

To activate your device with Sprint Media Manager:

1. Click on theSprint Media Manager desktop

icon on your computer.

2. Turn your device on by pressing

3. Connect one end of the included USB

cable to an open USB port on your

computer.

4. Plug the other end of the included USB

cable into the Accessories/Power Cable

Jack located on the side of the device.

(Wait for the connection to be

Correct

Incorrect

completed. When connected, your computer will automatically detect your device.)

5. Enter your email address and phone name (Samsung Instinct™).

6. From the Media Manager application, click Activate.

Using Your Device: Transferring Content

To manage and transfer your playlist:

1. From the Add Media dialogue, select Media to import.

2. From the left pane, create a media playlist for each media type (music, photos, videos).

3. Drag the playlists to the right pane.

4. Click Transfer Now.

Transferring Other Previously Purchased Content

You can transfer content which you have previously purchased from Sprint for your old

phone, such as ringers, directly to your device using My Content Manager.

1. Press

and touch Fun (

) > Shopping to launch the Web browser.

2. Touch My Content Manager from the Categories menu.

3. Select a Content Type.

4. Select Content Title to view the item’s details.

5. From the Contact Details page, select Download to redownload your content.

No charges apply when you redownload content to which you have digital rights.

Note

Tip

To redownload previously purchased ringers to which you own the digital rights, from Content

Details in the My Content Manager, select Ringers. Select the ringer you want to download, and

touch Download. Follow the onscreen instructions. Repeat the process for additional ringers or

for other types of content.

You will be unable to download content that has expired, or that may be incompatible with your

new device. Some ringers, games, and other content may work only with certain phones.

Note

Using Your Device: Transferring Content

Camera

ࡗ

Taking Pictures (page 69)

Recording Videos (page 72)

ࡗ

Your device’s built-in camera gives you the ability to take full-color digital pictures, view your pictures using

the device’s display, and instantly send them to family and friends. It’s fun, and it’s as easy to use as a

traditional point-and-click camera: just take a picture, view it on your device’s display, and

send it from your device to up to 10 people.

For information on sending pictures and videos with your device, see “Sprint Picture Mail” on

page 86.

You must have a microSD memory card installed to use the Camera. Your device comes

with a pre-installed 2GB card; it can support microSD cards of up to 8GB.

Important

Taking Pictures

Taking pictures with your device’s built-in camera is as simple as choosing a subject,

pointing the lens, and pressing a button.

To take a picture:

1. Press

to activate camera mode.

Pressing and holding

launches the camcorder.

for more than 2 seconds

Note

2. Using the device’s display screen as a viewfinder, aim the

camera lens at your subject.

3. Press

until the shutter sounds. (The picture will

automatically be saved into the DCIM folder of your

internal microSD card.)

Using Your Device: Camera

Image and video files can only be saved in the DCIM folder of the microSD card. Data can not be

saved onto the device’s memory.

Note

4. Take a few minutes to get familiarized with the layout of the Camera screen.

Display Image Activate Camcorder

ꢄꢄꢅꢆꢇSLFVꢇOHIW

Fuzzy Image

Warning

View My Photo

Folder

Pictures

Remaining

Using the My Photo Folder

1. Once the picture has been taken, touch

to open the media screen in its default

Thumbnail view.

2. Touch an image file from the media screen.

Using Your Device: Camera

Thumbnail View

Activate Camera

Launch

Slideshow

Switch to

Filmstrip View

3. Touch one of the available options:

Ⅲ Delete (

) to delete the active file.

Ⅲ Send via Bluetooth (

) to send the picture via Bluetooth. This method can also be used

to print the picture using a Bluetooth-enabled printer (see page 78). (You can also send

pictures using Sprint Picture Mail. See “Sprint Picture Mail” on page 86.)

Ⅲ Play Slideshow (

) to display a slideshow sequence of the current pictures and videos

found in the My Photo folder.

Ⅲ Magnify (

) to increase/decrease the magnification of the currently active file.

Ⅲ Take New Picture (

) to return to camera mode to take another picture.

Ⅲ Send (

) to send your picture using Sprint Picture Mail.

Ⅲ Upload (

) to upload the picture to the Sprint Picture Mail Web site

(www.sprint.com/picturemail).

Ⅲ Filmstrip View (

) to display the current images in a scrollable Filmstrip view (see

page 72).

Ⅲ Assign Picture (

) to assign the selected picture to either a Picture ID image or as a

Background.

Using Your Device: Camera

Recording Videos

In addition to taking pictures, you can also record, view, and send videos to your friends and

family with your device’s built-in video camera.

1. Press and hold

for at least 2 – 3 seconds to activate the video mode.

2. Using the device’s main display screen as a viewfinder, aim the camera lens at your

subject.

3. Touch the onscreen icon to change the recording length for the video segment:

Ⅲ Short Clip (

) lets you record video of up to 2 minutes (6MB) per segment that can

then be wirelessly uploaded.

Ⅲ Long Clip (

) lets you record video segments with no preset time length. These videos

are only limited by the available free storage remaining on the internal microSD card.

(The available time length is displayed at the bottom left of the screen.)

Any video segments [over 2 min. or 6 MB] cannot be uploaded or sent wirelessly.

Note

4. Press

to begin recording.

5. Press

to stop recording. (The video will automatically be saved into your My Photos

folder.)

Using Your Device: Camera

Display Image Activate Camera

Video

Segment

Length

Recording Time

Remaining

My Phone

Folder

6. Touch

to return to the My Photo folder and view available multimedia file options:

) to delete either selected files or all files from the My Photo folder.

Ⅲ Delete (

Ⅲ Play Slideshow (

) to display a slideshow sequence of the current image/videos found

in the My Phone folder.

Ⅲ Play (

) to play the current video file.

Ⅲ Take New Video (

) to return to camcorder mode to shoot another video.

Ⅲ Send (

) to send your picture via Sprint Picture Mail.

Ⅲ Upload (

) to upload the picture to the Sprint Picture Mail Web site

(www.sprint.com/picturemail).

Ⅲ Filmstrip View ( ) to display the current images in a scrollable Filmstrip view.

Using Your Device: Camera

Bluetooth

ࡗ

Turning Bluetooth On and Off (page 7 4 )

Using the Bluetooth Settings Menu (page 75)

Pairing Bluetooth Devices (page 76)

Sending Data via Bluetooth (page 77)

Your device features built-in Bluetooth technology, allowing you to share information more easily than ever

before. Bluetooth is a short-range communications technology that allows you to connect

wirelessly to a number of Bluetooth devices, such as headsets and hands-free car kits, and

Bluetooth-enabled handhelds, computers, printers, and wireless phones. The Bluetooth

communication range is usually up to approximately 30 feet.

Turning Bluetooth On and Off

By default, your device’s Bluetooth feature is turned off. Turning Bluetooth on makes your

device “discoverable” by other in-range Bluetooth devices.

To turn Bluetooth on:

1. Press

and touch Main (

) > Settings > Bluetooth.

2. Touch and drag the slider to the On position. (The page then refreshes to reveal new

functionality and options.)

To turn Bluetooth off:

1. Press

and touch Main (

) > Settings > Bluetooth.

2. Touch and drag the slider to the Off position to disable Bluetooth and hide all options.

Using Your Device: Bluetooth

Bluetooth Status Indicators

The following icons show your Bluetooth connection status at a glance:

– Bluetooth is active (default status)

– Bluetooth is paired to a headset

– Bluetooth is active but having problems connecting to its paired device

– Bluetooth is actively transmitting or receiving data

– Paired Bluetooth device is paired and communicating

– Paired Bluetooth device is disconnected

Using the Bluetooth Settings Menu

The Bluetooth menu allows you to configure your Bluetooth service.

To access the Bluetooth Settings menu:

1. Press

and touch Main (

) > Settings > Bluetooth.

2. Set your Bluetooth options to:

Ⅲ Touch Visibility and select an option to set your Bluetooth visibility.

Ⅲ Touch Device Info to display your device’s Bluetooth profiles and address.

Ⅲ Touch Device Name and use the keyboard to rename your device for Bluetooth usage.

Assigning a Bluetooth Name to Your Device

By default, your device is given the Bluetooth name “SPH-M800.” You can easily change

your device's Bluetooth name to avoid confusion with other nearby Bluetooth devices.

1. Press

and touch Main (

) > Settings > Bluetooth > Device Name.

2. Touch the grey name field.

Using Your Device: Bluetooth

3. Press and hold

to delete the default “SPH-M800” name.

4. Enter a new descriptive name for your device and touch Done.

Viewing Information for Available Devices

You can review detailed information for any available devices.

1. Press

and touch Main (

) > Settings > Bluetooth > Trusted Devices.

2. Touch the properties button (

) to view information for a selected device.

3. Touch Done to return to the previous listing.

Pairing Bluetooth Devices

Paired Devices

The Bluetooth pairing process allows you to

establish trusted connections between your

device and another Bluetooth device. When

devices are paired, a passkey is shared

between devices, allowing for fast, secure

connections while bypassing the discovery

and authentication process.

Bluetooth-capable

Phone

Bluetooth-capable

Computer

To pair Bluetooth devices with your

Instinct, make sure your Instinct is visible

to other devices. See “Using the

Note

Bluetooth Headset

Bluetooth Settings Menu” on page 75.

To pair your device with another Bluetooth device:

1. Press and touch Main (

) > Settings > Bluetooth > Trusted Devices. (Your device will

display a list of discovered in-range Bluetooth devices.)

Using Your Device: Bluetooth

2. Scroll down the list and touch a device name to begin the pairing process.

3. Enter the passkey (PIN) for the external device and touch Done.

4. Once the recipient enters the passkey/passcode for your Instinct, the pairing will be

complete.

Due to different specifications and features of other Bluetooth-compatible devices, display and

operations may be different, and functions such as transfer or exchange may not be possible with

all Bluetooth-compatible devices.

Note

Deleting Paired Devices

To delete a specific paired device:

1. Press

and touch Main (

) > Settings > Bluetooth > Trusted Devices.

2. Touch

(upper-right).

3. Touch Delete Some and touch and highlight an entry from the list.

Delete Selected

4. Touch and drag

to the right to delete the selected device.

To delete all paired devices:

1. Press

and touch Main (

(upper-right).

) > Settings > Bluetooth > Trusted Devices.

2. Touch

3. Touch Delete All > Delete to delete all of the currently paired devices.

Sending Data via Bluetooth

You can send data saved on your device to another Bluetooth device.

To send contacts information via Bluetooth:

1. Press

and touch Contacts (

Using Your Device: Bluetooth

2. Touch an entry and touch Send Contact. (The device begins searching for available

Bluetooth devices. Bluetooth-capable phones appear in the list with a phone icon.)

3. From the list of Found Devices, touch the name field and touch Send to send the

information to this recipient.

Do not touch

start a new search for Bluetooth devices.

until searching has finished. This will refresh the list and cause the device to

Tip

4. The recipient must select whether to accept or reject the incoming transfer.

To send pictures via Bluetooth:

1. Press

and touch Fun (

) > My Photo > Camera.

2. Touch

(left of the screen). (The device begins searching for available Bluetooth

devices.)

3. Select a picture to send by touching it. (You can select multiple pictures which are then

highlighted in blue.)

Ⅲ To “deselect” a file, touch it again until it is no longer highlighted.

4. Touch Ok to attach your files to a new message.

5. From the list of Found Devices, touch the name field to send the pictures or videos.

Touching

displays the properties of the selected Bluetooth device.

Tip

6. The recipient must select whether to accept or reject the incoming transfer.

If your old phone has Bluetooth capability, you can transfer Contacts from it to your Instinct. See

“Transfer Contacts With Bluetooth” on page 65.

Note

Using Your Device: Bluetooth

Sprint Services

Sprint Service Features: The Basics

ࡗ

Visual Voicemail (page 79)

Text Messaging (SMS) (page 84)

Sprint Picture Mail (page 86)

Now that you’ve explored your device’s fundamentals, it’s time to learn about the calling features that

enhance your Sprint service. This section outlines your basic Sprint service features.

Visual Voicemail

Visual Voicemail gives you a quick and easy way to access your voicemail. Now you can find

exactly the message you want without having to listen to every voicemail message first.

Visual Voicemail allows you to quickly and easily decide which voicemail messages you

choose to listen to. You can also send your own visual voicemail messages to select

recipients.

This new feature periodically goes out to your voicemail and gathers the caller information

from all of the current voicemails. It then populates a list with the caller name and number,

along with the length of time and priority level of the voicemail message.

Sprint Service Features: The Basics

Setting Up Your Visual Voicemail

All unanswered calls to your device are automatically transferred to your voicemail, even if

your device is in use or turned off. Therefore, you will want to set up your Sprint Voicemail

and personal greeting as soon as your device is activated.

1. Press

and touch Main (

) > Voicemail.

2. Touch Personalize Now and follow the system prompts.

3. When prompted to enter information, touch

to display the onscreen dial pad.

4. Once you have completed the setup process, return to the

Voicemail page (see steps 1 and 2).

5. Touch the Welcome to Voicemail message on the screen to

listen to a brief explanation of Visual Voicemail services.

The following is a description of the features available while

reviewing a Visual Voicemail message.

Ⅲ Timeline provides a visual timeline for the current message.

Touch and drag this bar to scrub through the message to

different points. Touch

to resume.

to pause the playback, touch

Ⅲ Speaker Off/On lets you turn the speakerphone on or off

during playback. If the Speakerphone feature was enabled

within the Voicemail Settings menu, the speakerphone will

always be automatically enabled during voicemail playback.

Ⅲ Delete lets you delete the current voicemail message. Touch

Delete to confirm the deletion process.

555-555-1234

Talk

Ⅲ TALK (

) allows you to place a call to the sender’s phone number.

Ⅲ Lock prevents deletion of the selected voicemail message.

Ⅲ Txt Msg lets you create and then deliver a text message to the sender’s phone number.

Sprint Service Features: The Basics

Ⅲ Re/Fwd lets you reply to the current voicemail or forward it to anyone with either an

email or phone number. This allows you to send this voicemail message to several

recipients at the same time.

Voicemail Passcode

Note

If you are concerned about unauthorized access to your voicemail account, Sprint recommends

that you enable your voicemail passcode. (Do not activate One-Touch Message Access.)

To configure your Voicemail and access the menu features, don’t forget to touch

display an onscreen dial pad that can be used to input your numeric responses.

Important

Configuring Your Visual Voicemail Settings

All unanswered calls to your device are automatically transferred to your voicemail, even if

your device is in use or turned off. Therefore, you will want to set up your Sprint Voicemail

and personal greeting as soon as your device is activated.

ᮣ

Press

and touch Main (

) > Settings > General > Voicemail Settings.

From the Voicemail Settings menu, you can:

Ⅲ Configure your Speakerphone to automatically activate when you review your Visual

Voicemail.

Ⅲ Adjust your Voicemail Greeting.

● Touch Greeting to call the voicemail system and be taken directly to the “Setup Your

Greeting” menu, where you can record a new greeting.

Ⅲ Compose your From Name. This is the name or number that is attached to your

outgoing voicemails as part of an identification string.

Sprint Service Features: The Basics

Voicemail Notification

There are several ways your device alerts you to a new message:

ⅷ By displaying a message on the screen.

ⅷ By sounding the assigned ringer type.

ⅷ By displaying

at the top of your screen.

When you have a missed call or receive a new message (such as Voicemail, Text or Picture),

your device alerts you and displays a While you were out ( ) icon. This icon alerts you to

either new messages (Text and Picture) or missed calls.

Voicemail Messages

Missed Calls

New Voicemail Message Alerts

The Instinct utilizes a new “Visual Voicemail” function that automatically retrieves a list of your

current voicemail messages and then presents them as a detailed list.

The Voicemail page provides you with a list of messages containing the sender’s phone

number (or Contacts name) and length of message.

Sprint Service Features: The Basics

To call your voicemail:

1. Press and touch Main (

) > Voicemail.

2. Touch an entry from the list of available voicemails to quickly access your voicemail and

only playback the selected message.

To display your Missed Log:

1. Press

and touch History (

2. Touch the entry’s phone number to dial it.

When you are roaming off the Sprint National Network, you may not receive notification of new

voicemail messages. It is recommended that you periodically check your voicemail by dialing 1 +

Note

area code + your wireless phone number. When your voicemail answers, press ( ) and enter your

passcode. You will be charged roaming rates when accessing voicemail while roaming off the

Sprint National Network.

Your device accepts messages even when it is turned off. However, you are notified of new

messages only when your device is turned on and you are in a Sprint service area.

Retrieving Your Voicemail Messages

You can review your messages directly from your wireless device or from any other touch-

tone phone. To dial from your wireless device, either speed dial your voicemail or use the

menu keys.

Using the Menu on Your Device to Access Your Messages

1. Press

and touch Main (

) > Voicemail.

2. Touch an entry from the list of available voicemails to quickly access your voicemail and

only playback the selected message.

Sprint Service Features: The Basics

Using Another Phone to Access Messages

1. Dial your wireless phone number.

2. When your voicemail answers, press

3. Enter your passcode.

Consult the User Guide on the CD to learn more about the advanced features of your device’s

visual voicemail.

Note

Text Messaging (SMS)

With Text Messaging, you can send and receive instant text messages between your wireless

device and another messaging-ready device. When you receive a new message, it will

automatically display on your device’s screen.

Composing Text Messages

1. Press

and touch Main (

) > Messaging > Text (

2. Touch

to compose a new text message.

3. Select the contact entry method you prefer by touching an associated option:

Ⅲ Recent List to select a recipient from a list of recently sent messages.

Ⅲ Contacts to select a recipient from your Contacts (qualifying Contacts entries must

contain a wireless phone number or an email address).

Ⅲ Manual Entry to manually enter a recipient by choosing either:

●

Enter Phone Number to use the onscreen dial pad to enter a wireless phone number.

Touch Done to continue.

●

Enter Email Address to use the keyboard to enter the recipient’s email address. Touch

Done to continue.

4. Use the keyboard to enter a message.

Sprint Service Features: The Basics

5. Touch Done to save your text and return to your message.

6. Add more recipients by touching

and repeating step 3.

7. Review your message and touch Send.

Accessing Text Messages

To read a text message:

When you receive a text message, an announcement tone sounds and a

displayed on the screen.

icon is

ᮣ

Touch Dismiss to ignore the notification and return to the message at a later time.)

– or –

Touch View to read the new message.

1. Press

and touch Main (

) > Messaging.

2. Touch a message entry from the list.

To reply to a text message:

1. While the message is open, touch Reply.

2. Compose your reply and press Done.

3. Review your message and touch Send.

Sprint Service Features: The Basics

Deleting Messages

To delete all messages:

1. Press

and touch Main (

) > Messaging.

2. Touch (

) to open the Delete menu.

3. Touch Delete All > Delete.

To delete selected messages:

1. Press

and touch Main (

) > Messaging.

2. Touch (

) to open the Delete menu.

3. Touch Delete Some.

4. Touch any messages you wish to delete. Selected messages are highlighted in blue.

5. Touch and drag the Delete Selected slider to the right.

Sprint Picture Mail

Sprint Picture Mail lets you instantly send pictures and videos from your device to wireless

phone numbers and email addresses.

Registering Your Sprint Picture Mail Account

The first time you try to send pictures or videos or access any of the picture management

options involving the Sprint Picture Mail Web site, you will be prompted to register your Sprint

Picture Mail account and establish a password.

1. When you see the Sprint Picture Mail account prompt, enter a password for your

account and touch OK. (You will be prompted to confirm your password.)

2. The system will create your account and you will see an onscreen confirmation.

Sprint Service Features: The Basics

Sending Sprint Picture Mail From Messaging

1. Press

and touch Main (

) > Messaging > Picture (

2. Touch

to compose a new picture message.

3. Select the contact entry method you prefer by touching an associated option:

Ⅲ Recent List to select a recipient from a list of recently sent messages.

Ⅲ Contacts to select a recipient from your Contacts (qualifying Contacts entries must

contain a wireless phone number or an email address).

Ⅲ Manual Entry to manually enter a recipient by choosing either:

●

Enter Phone Number to use the onscreen dial pad to enter a wireless phone number.

Touch Done to continue.

●

Enter Email Address to use the onscreen keyboard to enter the recipient’s email

address. Touch Done to continue.

4. Select an album from which to select a picture (such as Text Only, Camera Album, and

Saved Album).

5. Touch one or more thumbnail images and then touch Ok.

6. Add more recipients by touching

and repeating step 3.

7. From the New Picture Mail screen, select additional options.

Ⅲ Touch Subj: and enter a subject for the message. Touch Done to continue.

Ⅲ Touch Text: and enter a text message to go with the pictures. Touch Done to continue.

Ⅲ Touch Add Voice Memo to record and attach a voice memo.

8. When you have finished adding content, review your message and touch Send.

For additional information about Sprint Picture Mail, see your User Guide on the CD.

Sprint Service Features: The Basics

Web and Data: Sprint Power Vision

ࡗ

Web Access (page 88)

Live Search (page 94)

Email (page 94)

Sprint Power Vision offers easy and amazing data services you will really use. These features –

including portable Web access, messaging, TV, music, games, downloadable ringers and

screen savers, and portable Web access – let you have fun, stay in touch, and stay informed

no matter where you go on the Sprint National Network.

Web Access

Launching a Web Connection

ᮣ

Press

and touch Web (

) > Web. (Your Web connection starts and the Instinct

home page is displayed.)

Magnification

Navigation Toolbar

Web Toolbar

Screen View

Sprint Service Features: Web: Sprint Power Vision

The default view for the browser window is to show only the left pane (Magnification.) Touching

allows you to also view the Navigation and Toolbar panes. To reset the view, touch again.

Note

Data Connection Status and Indicators

Your device displays the current status of your data connection through indicators at the top

of the screen. The following symbols are used:

Your device is connected to the high-speed Sprint Mobile Broadband Network

(DOrA). When the triangles are animated, data is being transferred (for example, when

you are opening a Web page); when the triangles are gray, you are connected to the

network but data is not currently being transferred (for example, when you are viewing

a Web page that is completely open). While data is being transmitted, you can make a

call but can't receive one.

Your device is on and is connected to the Sprint 1xRTT data network. When the arrows are

animated, data is being transferred (for example, when you are opening a Web page) and

you cannot receive calls. When the arrows are gray, you are connected to the network but

data is not currently being transferred (for example, when you are viewing a Web page that

is completely open), and you can receive calls.

If no indicator is displayed, your device does not have a current data connection. To launch a

connection, see “Launching a Web Connection” on page 88.

Navigating the Web

Navigating through menus and Web sites during a Web session is easy once you’ve learned

a few basics. Here are some tips for getting around:

Using the Full Screen View

By default, both the Address Bar and Navigation toolbar will be visible onscreen. These items

can be toggled off to reveal more of the current web page.

Sprint Service Features: Web and Data: Sprint Power Vision

ᮣ

Touch

to switch the views from either Full screen or Normal view.

Ⅲ The Magnification will remain onscreen regardless of the current view.

Scrolling Through a Web Page

As with other menu and list items on your device,

scrolling is a simple matter of sliding your finger up

or down through the page.

To scroll up or down through a Web page:

ᮣ

Slide your finger either up or down on the

screen.

To move around a Web page:

ᮣ

Touch and drag across the screen in any

direction.

Selecting Onscreen Items

ᮣ

Touch an onscreen item or hyperlink.

Links, which are displayed as underlined text, allow

you to jump to Web pages, select special functions,

or even place phone calls.

Entering Text Into a Search or Text Field

ᮣ

Touch an onscreen text field or Search field twice to display the text input screen. See

“Entering Text” on page 21.

Going Back

To go back one page:

ᮣ

Touch

from the left of the Address bar.

Sprint Service Features: Web: Sprint Power Vision

To see the Navigation toolbar (and its associated buttons) you must be in the Normal viewing

mode. See “Using the Full Screen View” on page 89.

Tip

The

is also used for deleting text (like a BACKSPACE key) when you are entering text.

Note

Going Home

ᮣ

Touch

To see the Navigation toolbar (and its associated buttons) you must be in the Normal viewing

mode. See “Using the Full Screen View” on page 89.

Tip

Using the Web Toolbar

1. Press

and touch Web (

) > Web.

Web Toolbar

ꢅ

ꢁ

ꢀ

ꢃ

ꢂ

ꢄ

ꢈ

ꢉ

ꢊ

Options available from the Web toolbar include:

1. Full Screen icon lets you maximize the visible area onscreen by hiding both the Address

bar and Web toolbar (right).

Sprint Service Features: Web and Data: Sprint Power Vision

2. Change Mode icon lets you change the viewing mode of the current web page between

Mobile Mode (screen is configured for viewing using standard mobile phone

parameters) and Standard Mode (mimics how the page would appear on via a monitor).

This default view mode is set from within Main (

) > Settings > Web Browser.

3. Quick Navigation View icon (while in Standard Mode) lets you preview an image of the

current web page from a “birds-eye” view. The yellow rectangle indicates the currently

displayed area.

4. Zoom view lets you toggle the zoom view of the current Web page (1x, 2x or ½x).

5. Address Bar lets you use an onscreen keyboard to navigate directly to a Web site by

entering its URL (Web site address).

Ⅲ Using

takes you forward in your history to a previously viewed page.

takes you back in your history to a previously viewed page.

Ⅲ Using

6. Web Search icon launches a Web search page where you can enter a keyword and then

search for it using the full built-in browser.

7. Home icon returns the browser to the Sprint Power Vision home page.

8. Favorites icon allows you to access and manage your bookmarks. To navigate to a site,

simply touch a previous bookmark from the Favorites list.

9. History icon displays a list of your recently visited web sites. To navigate to a site, simply

touch an entry from the History list.

Going to a Specific Web Site

To go to a particular Web site by entering a URL (Web site address):

1. Press

and touch Web (

) > Web.

2. Touch the Address bar and clear the existing address by pressing and holding

3. Use the onscreen keyboard to enter a new URL and touch Done.

Not all Web sites are viewable on your device.

Note

Sprint Service Features: Web: Sprint Power Vision

Creating a Bookmark

Bookmarks allow you to store the address of your favorite Web sites for easy access at a

later time.

1. Go to the Web page you want to mark.

2. Touch

to open the Web Bookmarks page.

3. Touch

> Add Bookmark to add the currently active web page to your current Favorites

list.

Bookmarking a page does not store the page contents, just its address.

Note

Some pages cannot be bookmarked. Whether a particular Web page may be marked is

controlled by its creator.

Accessing a Bookmark

ᮣ

From any Web page, touch

to open the Web Bookmarks page and then touch an

entry from the list to launch that Web page.

The bookmark containing the Home icon indicates the current home page.

Note

Using the Web Menu

The Web menu page on your Instinct gives you quick access not only to the Web, but also to

categorized information that’s tailored to your location (based on the ZIP code you provide).

1. Press

and touch Web (

) to display the Web menu page.

2. Touch an option, such as Weather, News, Sports, or Movies. (The first time you access an

option, enter your ZIP code at the prompt and touch Done.)

3. Select categories and articles to view the information you want. From the Movies menu

you can even follow prompts to call your local theater or launch a browser to buy tickets

online, on-the-go (not available for all theaters or all showings).

Sprint Service Features: Web and Data: Sprint Power Vision

Live Search

Live Search by Microsoft^®lets you use your Instinct’s Web and location capabilities together

to find just what you want right now.

1. Press

2. Read the Terms of Service and touch I Agree if you want to continue.

3. Press and hold (located on the right of the device), say the name of a business and

release . For example, press and hold , say "pizza," and release

Ⅲ Live Search uses your GPS location to compile a list of nearby places.

and touch Web (

) > Live Search.

4. Touch an entry from the resulting list to display an information page with an address, a

phone number link, and buttons for maps, directions, and more.

5. Touch

to use Sprint Navigation to obtain audio turn-by-turn directions for the

location selected.

Your device’s Email application lets you access and manage multiple email accounts

simultaneously in one convenient location.

Getting Started With Email

1. Press

and touch Main (

) > Email > Next. (The Email setup wizard will then start

and guide you through the setup process.)

2. Touch the grey device information field and then enter your wireless phone number and

touch Next. (If the phone number is already filled in, touch Next.)

Sprint Service Features: Web: Sprint Power Vision

3. Select an email provider (such as AOL^®Mail, AIM^®Mail, Hotmail^®, Yahoo!^®, or Gmail^®).

– or –

Select Work to set up a corporate email account using either Outlook Web Access from

a Microsoft Exchange Server or the Sprint Mobile Email connector for direct access.

– or –

Select More to choose from additional options. There are many available email options

listed, or you may add your own POP or IMAP email accounts.

Consult your company’s IT department for required information and permissions for any Work

email accounts. Read the onscreen setup information and the User Guide on the CD for

additional information about using Work email options on your Instinct.

Note

4. Touch Accept if you are prompted to accept any license agreements or disclaimers.

5. Follow the setup wizard instructions to enter the required sign-up information by

touching the associated grey field and then using the keyboard to enter the necessary

information.

Ⅲ Touch Done to save the new information.

The information required to sign in will vary depending on the email provider you are accessing.

Note

6. Touch Done once you’ve entered your sign-in information.

7. Touch Next to continue the sign-in process, request network access, save your settings,

and retrieve data from your email system.

Creating Additional Email Accounts

1. Press

and touch Main (

) > Email.

2. Touch the envelope icon to the left of the account name to display the Email Home

Page, and then touch Add New Email Account.

Sprint Service Features: Web and Data: Sprint Power Vision

3. Repeat the email setup procedures outlined in “Getting Started With Email” on page 94.

Ⅲ If you select an additional email address from the same provider, you will have to enter

a unique name for each entry.

Configuring the Sprint Mobile Email Settings

Using Email on your device is even easier than

using multiple email accounts on your computer.

The Email client allows you to manage multiple

Email Settings

email accounts through a single portal. Once you

have set up your first email account (see “Getting

Started With Email” on page 94), you can explore

Email Accounts/

Account Details

additional settings options.

Find Contacts Button

1. Press

and touch Main (

) > Email.

Browse Files Button

(The device then launches either your first

email account in the list or your last active

email account.)

2. Press

to return to the Email Home Page.

) to launch the Email

Add a New Email

Account Button

3. Touch Settings (

Settings page.

Accessing Email

1. Once you have set up your Email, press

and touch Main (

) > Email to launch the

application.

2. Touch the desired email account. (Your default account inbox will be displayed.)

---- Folder

Ⅲ Change the current folder by touching

(at the top of the page) and selecting

from one of the other available folders: Inbox, Drafts, Sent, Deleted, or Outbox.

3. Scroll up or down the screen to move the list of messages either up or down.

Sprint Service Features: Web: Sprint Power Vision

Touching multiple envelope icons allows you select multiple entries that can then be deleted or

marked as Read or Unread.

Note

4. Touch an entry from the list to read, manage, and reply to your email messages.

Ⅲ Touch Unread to mark the current email as unread.

Ⅲ Touch Reply/Fwd to respond to the current sender’s email by creating a new email

message. Choose one of the following options:

●

Reply to respond only to the originator.

Reply All to respond to all recipients of the selected email.

Forward to send the current email to another recipient.

Creating a New Email Message

1. Once you have set up your Email, press

and touch Main

Power Search Tab

(

) > Email to launch the application. (The most recently

accessed account inbox will be displayed.)

To go to another configured email account, touch the envelope

icon to the left of the current account name to display the Email

Home Page, and then touch the account you wish to access.

Tip

2. Touch

to begin creating a new email message.

3. Touch the To field and select the entry method you prefer by

touching an associated option:

Ⅲ Recent to select a recipient from a list of recent email contacts.

Ⅲ Contacts to use the Power Search tab (shown here) to select a

recipient from your Contacts (qualifying Contacts entries

must contain a wireless phone number or an email address).

Ⅲ Search to use a few characters to search through your email

account’s online Addres Book for a matching Contact entry.

Sprint Service Features: Web and Data: Sprint Power Vision

Ⅲ Manual to manually enter an email address by using the onscreen keyboard to enter the

recipient’s email address. Touch Done to save the entry.

4. Touch Add to insert the new recipient.

5. Add more recipients, touch

, touch Tap to Add a Contact, and repeat steps 3 and 4.

6. Touch the grey Subject field and use the keyboard to enter a subject.

7. Touch the grey Message field and use the keyboard to enter a message.

8. Touch Priority to assign a message priority to the new email.

9. Touch Save to store the email in the Drafts folder and continue composing it at a later

time.

10. Touch Send to deliver the email message to the selected recipients.

Deleting Email Messages

1. Touch an email message from the list to open it for viewing.

2. Touch

and confirm you want to delete the message by touching OK.

Sprint Service Features: Web: Sprint Power Vision

Entertainment: TV and Music

ࡗ

TV (page 99)

ࡗ

Music – Sprint Music Store (page 101)

Sprint TV gives you the ability to listen to audio clips and to view video clips right from your

device. Watch live TV and catch up on episodes of your favorite shows – anywhere on the

Sprint National Network.

Sprint Music lets you preview, purchase, download, and listen to over a million songs right on

your device. You can even add songs from your own library to round out your on-the-go

playlist.

The Sprint TV application offers a wide variety of accessible channels. Subscription options

include comprehensive basic packages as well as a full menu of “a la carte” channels. Visit

www.sprint.com for more information on channels and pricing.

Available categories and content are subject to change.

Note

Watching TV

1. Press

and touch Fun (

) > TV/Video > TV.

2. Select from one of the following categories:

Ⅲ Recently Played displays a list of recently accessed and viewed channels.

Ⅲ All Channels displays a list of all currently available channels.

Ⅲ Live displays a mobile guide listing of currently available real-time streaming channels.

Sprint Service: Entertainment: TV and Music

Ⅲ On Demand displays a list of currently available channels (pre-recorded).

Ⅲ More... displays Shop, Subscriptions, Settings, and Help menus.

3. Scroll through the channel listings within your selected category and touch a channel

name to launch the stream.

Ⅲ Touch

to view additional information about a channel.

Ⅲ Touch Add to Favorites to bookmark this channel.

If you don't own a channel, the first time you access it, you will be prompted to purchase access

(unless the channel doesn't have a monthly fee). Touch Subscribe to purchase access, or select

Preview to view a preview of the selected channel.

Note

Tip

While you are playing a clip, you can press

to stop the current video and return to the main

menu where you can select a different channel. Scroll through the listing of available channels

and once you find a channel you would like to watch or listen to, touch the clip’s name to begin

playback. (Wait approximately three seconds for the channel to load and begin playing.)

100

Sprint Service: Entertainment: TV and Music

Music – Sprint Music Store

The Sprint Music Store enables you to purchase and download digital music files to play on

your device or computer.

Accessing the Sprint Music Store

You can access the Sprint Music Store right from your device’s main menu, anywhere on the

Sprint National Network. When you enter the store for the first time, you will be prompted to

set up your user identification and password.

1. Press

and touch Fun (

) > Music.

2. Touch Store (

) to access the Sprint Music Store.

Store

3. Touch the grey password fields and use the onscreen keyboard to enter a 4-digit

password.

4. After you have entered your password into both fields, touch Create.

5. Once your password has been accepted, touch Continue to begin exploring the store.

Purchasing and Downloading Music

Now that you’re in the store, you can shop for songs to purchase and download to your

device’s microSD card.

1. From the Sprint Music Store opening page, scroll through the page and select an option

to browse the store:

Ⅲ Featured Tracks offers a revolving selection of highlighted songs and artists.

Ⅲ Categories allows you to choose from categories such as What’s Hot, Must Haves, Free

Songs This Week, Recommendations, Browse Genres, and specific musical genres.

Ⅲ Search (

) gives you the option of searching for specific songs or artists. Just use

your onscreen dial pad to enter your search criteria in the available field.

Sprint Service: Entertainment: TV and Music

101

2. Touch a category to open its listing or select a song. (The song information screen will

be displayed.)

3. Select an entry then choose an option:

Ⅲ Preview to play a sample of the selected song.

Ⅲ Buy for XX to purchase the song and store it on your device’s microSD card.

● When you buy a song, the file will download to your device’s microSD card. (If there

is no microSD card installed or if there is not enough free memory space on the

card, you will see an alert.)

● Once the song has been downloaded to your microSD card, you will see options

allowing you to play the song, add it to a playlist, or continue shopping.

Ⅲ

to view more information about the costs for purchasing the current song.

You can transfer songs you have previously purchased from the Sprint Music Store to your

Instinct. See “Transferring Music, Pictures, and Videos” on page 66.

Note

Playing Music

The Sprint Music Store not only gives you access to great music, it also gives you a place to

listen to and organize your music library.

Accessing the Music Player

1. Press

and touch Fun (

) > Music.

2. Press

to select the Player tab.

Player

Ⅲ All of the music on your Instinct is available through the music player, including songs

transferred from your computer using Sprint Media Manager. See page 60 for more

details. For complete information, see the User Guide on the CD.

3. Use the onscreen control buttons to play, pause, forward to the next song in your playlist

or return to the previous song.

102

Sprint Service: Entertainment: TV and Music

GPS Navigation

ࡗ

Getting Started With Sprint Navigation (page 103)

Using Sprint Navigation (page 104)

ࡗ

Sprint Navigation is a GPS navigation system that gives you turn-by-turn directions onscreen

and by voice right from your device. Get audible GPS directions for appointments, meetings,

or even the closest coffee shop.

Depending on your plan, Sprint Navigation may require a monthly subscription. Contact Sprint for

information and pricing.

Note

Getting Started With Sprint Navigation

Before You Begin

Sprint Navigation requires that your device’s Location setting is activated. Location is set to

On by default.

To turn Location On if it is set to Off:

1. Press

and touch Main (

) > Settings > General.

2. Touch and move the Location slider to On. Read the disclaimer and touch OK.

Registering Your Device

1. Press

and touch Main (

) > Navigation.

2. Follow the onscreen instructions to register your device.

Sprint Service Features: GPS Navigation

103

Using Sprint Navigation

1. Press

and touch Main (

) > Navigation.

2. Follow the onscreen instructions to register.

3. Read the disclaimer and touch Accept.

4. Touch Yes if you would like a brief tour of Sprint Navigation features. Touch No, Skip Tour to

go straight to the application.

5. Select an option and follow the onscreen instructions to take advantage of Sprint

Navigation’s full suite of features.

Ⅲ Drive To lets you get driving directions from wherever you are to wherever you’re going.

Choices include:

● My Favorites

● Recent Places

● Address

● Business

● Airport

● Contacts

Ⅲ Search lets you search for locations from dozens of options such as Food/Coffee, Hotels

& Motels, Gas Stations, Gas by Price, Banks/ATMs, WiFi Spots, and Parking Lots.

Ⅲ Maps & Traffic provides access to 2D and 3D maps for your current location and for

several categories of locations such as Airports and Contacts.

Ⅲ Share & More offers additional options, such as sharing your location with contacts,

creating and storing My Favorites locations, accessing the product tour, and setting

detailed application preferences.

104

Sprint Service Features: GPS Navigation

Safety and Warranty Information

Important Safety Information

ࡗ

General Precautions (page 105)

Maintaining Safe Use of and Access to Your Device (page 106)

Using Your Device With a Hearing Aid Device (page 107)

Caring for the Battery (page 109)

Radio Frequency (RF) Energy (page 110)

Owner’s Record (page 112)

This guide contains important operational and safety information that will help you safely use your device.

Failure to read and follow the information provided in this device guide may result in serious

bodily injury, death, or property damage.

General Precautions

There are several simple guidelines to operating your device properly and maintaining safe, satisfactory

service.

ⅷ To maximize performance, do not touch the bottom portion of your device where the internal antenna is

located while using the device.

ⅷ Speak directly into the mouthpiece.

ⅷ Avoid exposing your device and accessories to rain or liquid spills. If your device does get wet,

immediately turn the power off and remove the battery.

ⅷ Do not expose your device to direct sunlight for extended periods of time (such as on the dashboard of

a car).

ⅷ Although your device is quite sturdy, it is a complex piece of equipment and can be broken. Avoid

dropping, hitting, bending, or sitting on it.

Safety and Warranty Information: Important Safety Information

105

ⅷ Any changes or modifications to your device not expressly approved in this document could void your

warranty for this equipment and void your authority to operate this equipment.

For the best care of your device, only Sprint-authorized personnel should service your device and

accessories. Failure to do so may be dangerous and void your warranty.

Note

Maintaining Safe Use of and Access to Your Device

Do Not Rely on Your Device for Emergency Calls

Mobile devices operate using radio signals, which cannot guarantee connection in all conditions.

Therefore you should never rely solely upon any mobile device for essential communication (e.g., medical

emergencies). Emergency calls may not be possible on all cellular networks or when certain network

services or mobile device features are in use. Check with your local service provider for details.

Using Your Device While Driving

Talking on your device while driving (or operating the device without a hands-free device) is prohibited in

some jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first.

Purchase an optional hands-free accessory at your local Sprint Store, or call Sprint at 1-800-974-2221. You

can also dial # 2 2 2 on your device.

Tip

Following Safety Guidelines

To operate your device safely and efficiently, always follow any special regulations in a given area. Turn

your device off in areas where use is forbidden or when it may cause interference or danger.

Using Your Device Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, RF signals

from wireless devices may affect inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately shielded electronic operating systems or

entertainment systems in motor vehicles. Check with the manufacturer or their representative to determine

if these systems are adequately shielded from external RF signals. Also check with the manufacturer

regarding any equipment that has been added to your vehicle.

Consult the manufacturer of any personal medical devices, such as pacemakers and hearing aids, to

determine if they are adequately shielded from external RF signals.

106

Safety and Warranty Information: Important Safety Information

Always turn off the device in healthcare facilities, and request permission before using the device near

medical equipment.

Note

Turning Off Your Device Before Flying

Turn off your device before boarding any aircraft. To prevent possible interference with aircraft systems, the

U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew

member to use your device while the plane is on the ground. To prevent any risk of interference, FCC

regulations prohibit using your device while the plane is in the air.

Turning Off Your Device in Dangerous Areas

To avoid interfering with blasting operations, turn your device off when in a blasting area or in other areas

with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF

devices to set off explosives.

Turn your device off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare,

your device and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in

bodily injury or even death. These areas are often, but not always, clearly marked. They include:

Ⅲ Fueling areas such as gas stations.

Ⅲ Below deck on boats.

Ⅲ Fuel or chemical transfer or storage facilities.

Ⅲ Areas where the air contains chemicals or particles such as grain, dust, or metal powders.

Ⅲ Any other area where you would normally be advised to turn off your vehicle’s engine.

Never transport or store flammable gas, flammable liquids, or explosives in the compartment of your

vehicle that contains your device or accessories.

Note

Restricting Children’s Access to Your Device

Your device is not a toy. Do not allow children to play with it as they could hurt themselves and others,

damage the device or make calls that increase your Sprint invoice.

Using Your Device With a Hearing Aid Device

A number of Sprint devices have been tested for hearing aid device compatibility. When some wireless

devices are used with certain hearing devices (including hearing aids and cochlear implants), users may

detect a noise which can interfere with the effectiveness of the hearing device.

Safety and Warranty Information: Important Safety Information

107

Some hearing devices are more immune than others to this interference noise, and devices also vary in

the amount of interference noise they may generate. ANSI standard C63.19 was developed to provide a

standardized means of measuring both wireless device and hearing devices to determine usability rating

categories for both.

Ratings have been developed for mobile devices to assist hearing device users find devices that may be

compatible with their hearing device. Not all devices have been rated for compatibility with hearing

devices. Devices that have been rated have a label located on the box. Your Instinct (SPH-M800) has an

M3 and T3 rating.

These ratings are not guarantees. Results will vary depending on the user’s hearing device and individual

type and degree of hearing loss. If a hearing device is particularly vulnerable to interference noise, even a

device with a higher rating may still cause unacceptable noise levels in the hearing device. Trying out the

device with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings: Devices rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to

generate less interference to hearing devices than unrated devices. (M4 is the better/higher of the two

ratings.)

T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a

hearing device’s telecoil (“T Switch”or “Telephone Switch”) than unrated devices. (T4 is the better/higher

of the two ratings. Note that not all hearing devices have telecoils in them.)

Hearing aid devices may also be measured for immunity to interference noise from wireless devices and

should have ratings similar to devices. Ask your hearing healthcare professional for the rating of your

hearing aid. Add the rating of your hearing aid and your device to determine probable usability:

ⅷ Any combined rating equal to or greater than six offers excellent use.

ⅷ Any combined rating equal to five is considered normal use.

ⅷ Any combined rating equal to four is considered usable.

Thus, if you pair an M3 hearing aid with an M3 device, you will have a combined rating of six for “excellent

use.” This is synonymous for T ratings.

Sprint further suggests you experiment with multiple devices (even those not labeled M3/T3 or M4/T4)

while in the store to find the one that works best with your hearing aid device. Should you experience

interference or find the quality of service unsatisfactory after purchasing your device, promptly return it to

the store within 30 days of purchase. With the Sprint 30-day Risk-Free Guarantee, you may return the

device within 30 days of purchase for a full refund. More information about hearing aid compatibility may

be found at: www.fcc.gov, www.fda.gov, and www.accesswireless.org.

108

Safety and Warranty Information: Important Safety Information

Getting the Best Hearing Device Experience With Your Device

To further minimize interference:

ⅷ Set the device’s display and dial pad backlight settings to ensure the minimum time interval:

1. Press

and touch Main (

) > Settings > Display > Brightness, Backlight Dim, or Brightness

Off.

2. Touch the minimum time interval setting. (Brightness is adjustable by moving the slider either left or

right.)

ⅷ Position the device so the internal antenna is farthest from your hearing aid.

ⅷ Move the device around to find the point with least interference.

Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your battery’s performance.

ⅷ Recently there have been some public reports of wireless device batteries overheating, catching fire, or

exploding. It appears that many, if not all, of these reports involve counterfeit or inexpensive, aftermarket-

brand batteries with unknown or questionable manufacturing standards. Sprint is not aware of similar

problems with Sprint devices resulting from the proper use of batteries and accessories approved by

Sprint or the manufacturer of your device. Use only Sprint-approved or manufacturer-approved batteries

and accessories found at Sprint Stores or through your device’s manufacturer, or call 1-866-343-1114 to

order. They’re also available at www.sprint.com — click Accessories. Buying the right batteries and

accessories is the best way to ensure they’re genuine and safe.

ⅷ In order to avoid damage, charge the battery only in temperatures that range from 32° F to 113° F (0° C

to 45° C).

ⅷ Don’t use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.

ⅷ Never dispose of the battery by incineration.

ⅷ Keep the metal contacts on top of the battery clean.

ⅷ Don’t attempt to disassemble or short-circuit the battery.

ⅷ The battery may need recharging if it has not been used for a long period of time.

ⅷ It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged

hundreds of times before it needs replacing.

Safety and Warranty Information: Important Safety Information

109

ⅷ Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage

rules:

Less than one month:

-4° F to 140° F (-20° C to 60° C)

More than one month:

-4° F to 113° F (-20° C to 45° C)

Disposal of Lithium Ion (Li-Ion) Batteries

Do not handle a damaged or leaking Li-Ion battery as you can be burned.

For safe disposal options of your Li-Ion batteries, contact your nearest Sprint authorized service center.

Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in

household or business trash may be prohibited.

Radio Frequency (RF) Energy

Understanding How Your Device Operates

Your device is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radio

frequency (RF) signals. When you use your device, the system handling your call controls the power level.

This power can range from 0.006 watt to 0.2 watt in digital mode.

Knowing Radio Frequency Safety

The design of your device complies with updated NCRP standards described below.

In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and the American National

Standards Institute (ANSI) joined in updating ANSI’s 1982 standard for safety levels with respect to human

exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government

health agencies and industries developed this updated standard after reviewing the available body of

research. In 1993, the Federal Communications Commission (FCC) adopted this updated standard in a

regulation. In August 1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE

standard and the guidelines published by the National Council of Radiation Protection and Measurements

(NCRP).

110

Safety and Warranty Information: Important Safety Information

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the

Sprint supplied or approved carrying case, holster or other body-worn accessory. If you do not use a

body-worn accessory, ensure the antenna is at least 7/16 inch (1.5 centimeters) from your body when

transmitting. Use of non-Sprint-approved accessories may violate FCC RF exposure guidelines.

For more information about RF exposure, visit the FCC Web site at www.fcc.gov.

Specific Absorption Rates (SAR) for Wireless Devices

The SAR value corresponds to the relative amount of RF energy absorbed into the head of a user of a

wireless handset.

The SAR value of a device is the result of an extensive testing, measuring and calculation process. It does

not represent how much RF the device emits. All device models are tested at their highest value in strict

laboratory settings. But when in operation, the SAR of a device can be substantially less than the level

reported to the FCC. This is because of a variety of factors including its proximity to a base station

antenna, device design and other factors. What is important to remember is that each device meets strict

federal guidelines. Variations in SARs do not represent a variation in safety.

All devices must meet the federal standard, which incorporates a substantial margin of safety. As stated

above, variations in SAR values between different model devices do not mean variations in safety. SAR

values at or below the federal standard of 1.6 W/kg are considered safe for use by the public.

The highest reported SAR values of the Instinct (SPH-M800) are:

Cellular CDMA mode (Part 22):

Head: 1.16 W/kg; Body-worn: 1.22 W/kg

PCS mode (Part 24):

Head: 1.46 W/kg; Body-worn: 1.01 W/kg

FCC Radio Frequency Emission

This device meets the FCC Radio Frequency Emission Guidelines.

FCC ID number: A3LSPHM800.

More information on the device’s SAR can be found from the following FCC Web site:

http://www.fcc.gov/oet/ea/.

Safety and Warranty Information: Important Safety Information

111

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

Note

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

ⅷ Reorient the direction of the internal antenna.

ⅷ Increase the separation between the equipment and receiver.

ⅷ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

ⅷ Consult the dealer or an experienced radio/TV technician for help.

Owner’s Record

The model number, regulatory number, and serial number are located on a nameplate inside the battery

compartment. Record the serial number in the space provided below. This will be helpful if you need to

Model: Samsung Instinct^TM(SPH-M800)

Serial No.:

User Guide template version 7B (December 2007)

112

Safety and Warranty Information: Important Safety Information

Manufacturer’s Warranty

ࡗ

Manufacturer’s Warranty (page 113)

Your phone has been designed to provide you with reliable, worry-free service. If for any reason you

have a problem with your equipment, please refer to the manufacturer’s warranty in this

section.

For information regarding the terms and conditions of service for your phone, please visit

www.sprint.com or call Sprint Customer Service at 1-888-211-4727.

Manufacturer’s Warranty

STANDARD LIMITED WARRANTY

What is Covered and For How Long?

SAMSUNG TELECOMMUNICATIONS AMERICA, LLC (“SAMSUNG”) warrants to the original purchaser

(“Purchaser”) that SAMSUNG’s Phones and accessories (“Products”) are free from defects in material and

workmanship under normal use and service for the period commencing upon the date of purchase and

continuing for the following specified period of time after that date:

Phone

1 Year

Batteries

Leather Case/Pouch/Holster 90 Days

Game Pad

90 Days

1 Year

Other Phone Accessories

Safety and Warranty Information: Manufacturer’s Warranty

113

What is Not Covered?

This Limited Warranty is conditioned upon proper use of Product by Purchaser. This Limited Warranty does

not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical,

electrical or electromechanical stress, or modification of any part of Product, including antenna, or

cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any plastic

surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d)

malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/

peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper

testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of

Product, or (g) Product used or purchased outside the United States or Canada. This Limited Warranty

covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks, and this

Limited Warranty does not cover any battery if (i) the battery has been charged by a battery charger not

specified or approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery are broken

or show evidence of tampering, or (iii) the battery has been used in equipment other than the SAMSUNG

phone for which it is specified.

What are SAMSUNG’s Obligations?

During the applicable warranty period, SAMSUNG will repair or replace, at SAMSUNG's sole option,

without charge to Purchaser, any defective component part of Product. To obtain service under this Limited

Warranty, Purchaser must return Product to an authorized phone service facility in an adequate container

for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing

the date of purchase, the serial number of Product and the sellers' name and address. To obtain

assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon

receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG's

sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace

Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and

holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be

warranted for a period equal to the remainder of the original Limited Warranty on the original Product or

for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the

property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty,

Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product.

114

Safety and Warranty Information: Manufacturer’s Warranty

What Are the Limits on SAMSUNG’s Liability?

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE

PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE

NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER

WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:

“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR

USE;

“WARRANTIES OF TITLE OR NON-INFRINGEMENT;

“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;

“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR

“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR

CONTRACT PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN

EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED

WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF

APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN

WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION,

SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE

PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR

INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE

EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES,

OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT

(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS

AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT

AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE

TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY

PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY

LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY

FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND

Safety and Warranty Information: Manufacturer’s Warranty

115

WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR

EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR

REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR

OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF

ANY THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,

INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT.

THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-

PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR,

OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.

This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and

SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this

Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to

make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.

Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do

not constitute warranties by SAMSUNG and should not be relied upon.

Precautions for Transfer and Disposal

If data stored on this device is deleted or reformatted using the standard methods, the data only appears

to be removed on a superficial level, and it may be possible for someone to retrieve and reuse the data by

means of special software.

To avoid unintended information leaks and other problems of this sort, it is recommended that the device

be returned to Samsung’s Customer Care Center for an Extended File System (EFS) Clear which will

eliminate all user memory and return all settings to default settings. Please contact the Samsung

Customer Care Center for details.

Please provide warranty information (proof of purchase) to Samsung’s Customer Care

Center in order to provide this service at no charge. If the warranty has expired on the

device, charges may apply.

Important

116

Safety and Warranty Information: Manufacturer’s Warranty

Customer Care Center:

1000 Klein St.

Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Samsung Telecommunications America, LLC:

1301 East Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG (726-7864)

If you are using a handset other than a standard numeric keypad, dial the numbers listed in

brackets.

Important

Phone: 1-888-987-HELP (4357)

trademark of Samsung Electronics America, Inc., and its related entities.

No reproduction in whole or in part allowed without prior written approval. Specifications and availability

subject to change without notice. [011604]

Safety and Warranty Information: Manufacturer’s Warranty

117

Brightness

Changing 31

Index

Calendar 50–52

Calibration 32

Camcorder 72–73

Camera 69–73

Change Mode 92

Charger

Using 13

Clock 19

Computer

ABC Mode 22

Activation 4

Address Bar 92

Alarm 19

Answer 24

Answering Calls 24

Device Active 24

Device Locked 25

Answering Options 24

Connecting via USB 61

Connect ing To Your Computer 61

Contacts 40–49

Adding an Entry 40

Deleting Selected Entries 46

Editing 44

Background 31

Backlight 30

Battery 12–13

Sending via Bluetooth 45

Bluetooth 74–78

Deleting Paired Devices 77

Device Information 76

Device Name 75

Send Contacts 77

Sending data 77

Transferring Contacts 65

Bookmarks

Data Services 88–98

Devi ce (illus.) 8

Device Settings 28–33

Display Settings 30

Favorites 33

Location Settings 32

Sound Settings 28–30

Touch Settings 31

Accessing 93

Creating 93

118

Index

Dialer 23

Display Screen 10

Display Settings 30

Background 31

Backlight 30

Favorites 33, 92

Favs 33

FCC Notice 112

Full Screen 91

Brightness 31

GPS Navigation 103

Email 94

Accessing 96

History 3 6–39, 92

Making a Call 38

Saving a New Number 39

Saving a Number 39

Home 92

Creating 97

Creating Additional Accounts 95

Deleting Email 98

Getting Started 94

Work Email 95

Email Settings 96

Emergency Numbers 25

End-of-Call Options 27

Entering Text 21–22

ABC Mode 22

In-Call Options 26

Key Functions 9

Live Search 94

Location 33

Location Settings 32

Lock Code

Changing 35

Locking Your Device 34

Into an Search Field 90

Numbers 22

On a Web page 90

Selecting Mode 21

Symbols 22

Entries

Deleting 20

Detaching 20

Main Functions 14, 15

Main Screens 14

Making Calls 23

Index

119

Navigation 14

Messaging

Deleting All Messages 86

Pictures 69

Camera, 69–71

Taking 69

Playing Music 102

Deleting Selected Messages 86

Picture Mail 86

Text Messaging 84

microSD Card 58–63

Accessing 60

Power Search Tab 18, 97

Quick Navigation View 92

Redial 27

Creating Folders 62

Formatting 62

Removal 59

Resetting Your Device 35

Resetting Your Device’s Settings 35

Ringer Types 28

Transferring Data 62

Mobile Sync 49, 64

Music 101

Ringer Volume

Adjusting 29

Mute 26

Safety Information 105–112

Save 27

Screen Calibration 32

Scrolling

Navigation Toolbar 88

Owner’s Record 112

How To 16

Security 34–35

Sensitivity 31

Silence All 30

Deactivating 30

Silent 24

Phone Functions 14, 15

Phone Number

Displaying 23

Saving 42

Phone Number Options 44

Phone Settings

Shortcuts 33

SMS Text Messaging 84

Picture Mail 86

120

Index

Sounds

System Volume

Speaker 26

Speech to Action 53–57

Launch Application 57

Make a Call 54

Send a Message 55

Settings 57

Speed Dial 46

Adding to List 46

Sprint Media Manager 60, 66

Sprint Mobile Email 96

Sprint Mobile Sync 49

Sprint Music Store 101

Sprint Navigation 94

Using 104

Composing 84

Deleting 86

Text Messaging 84

Three-way Call 26

Touch Calibration 32

Touch Sensitivity 31

Transfer

Contacts 64

Content 66

Transfer Contacts

Bluetooth 65

Turning Your Phone On and Off 11

TV 99

Sprint Picture Mail 86

Registering 86

Sending 87

Sprint Power Vision 88–98

Sprint Service

Unlock Screen 3, 14

Unlocking Your Device 34

Unmute 26

Activation 4

Vibrat e 11, 29

Always 29

Touch 30

Video

Recording 72

Visual Voicemail 79

Operator Services 6

Sprint 411 6

Sprint TV 99

Status Bar 17

Index

121

Voice Notification

Activating 29

Voice Service

Launch an Application 57

Picture Mail 56

Text Message 55

Voicemail 79–84

Configuring Settings 81

Notification 82

Retrieving 83

Setting Up 5, 80

Volume 29

Ringer 29

Silence All 30

System Volume 29

Web

Launching 88

Navigating To 92

Web Search 92

Web Toolbar 91

Wireless Backup 64

Zoom 92

122

Index

Uniden TCX950 User Manual
Siemens M50 User Manual
Seagate Pulsar2 ST400FM0002 User Manual
Seagate MOMENTUS ST9640423AS User Manual
Seagate MOMENTUS ST9160314ASIM User Manual
Seagate Cheetah ST3300457SS User Manual
Samsung NOTE II User Manual
Samsung MD65C User Manual
PMC Sierra Pm25LV512 User Manual
Nokia 6500 SLIDE RM 240 User Manual