SGH-T245G
M O B I L E
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
GH68-33989A
Printed in China
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or
registered trademarks of Nuance Communications, Inc., or its affiliates in the United
States and/or other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination
mark (Bluetooth word mark and “B Design”) are registered trademarks and are
wholly owned by the Bluetooth SIG.
Open Source Software
Some software components of this product incorporate source code covered under
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),
OpenSSL License, BSD License and other open source licenses. To obtain the
source code covered under the open source licenses, please visit:
.
SAR Information
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based
on the safety standards that were developed by independent scientific organizations
through periodic evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless phones employs a unit of measurement
known as Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.
The highest SAR values for this model phone were Head: 0.43 W/kg,
Body-worn: 0.73 W/kg.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
TracFone_T245G_UDKD3_MM_042111_F4
Table of Contents
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turning the Phone On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Main Display Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Options During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Accessing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Creating a New Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1
Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
My Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Delete All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Used Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Taking a Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Setting Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Viewing Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
My Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Finding a Contact List Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Adding a New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Reject List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
FDN Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Contacts Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
SIM Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
2
Sound Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Applications Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Used Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
3
Section 1: Getting Started
This section explains how to start using your phone by charging your battery and
setting up your voice mail.
Setting Up Your Phone
SIM Card
Your phone comes with a pre-installed SIM card.
Removing and Replacing the Battery
To remove the battery:
1. If the phone is turned on, press and hold
until the phone turns off.
2. Remove the battery cover by sliding it in the direction of the arrow (1).
3. Carefully lift the battery cover away from the back of the phone (2).
4
4. Lift the battery up (1) and away from the phone (2).
To replace the battery:
5. Slide the battery into the phone with the gold contacts on the battery
matching those in the phone (1).
6. Press the battery down until it clicks into place (2).
Getting Started
5
7. Reinstall the battery cover by sliding it back onto the phone (1) until you hear
it securely click (2).
Note: Make sure the battery is properly installed before switching on the phone.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. A travel adapter used for
charging the battery is included with your phone. Use only approved batteries and
chargers. Ask your local Samsung dealer for further details.
You can use the phone while the battery is charging, but doing so requires
additional charging time.
Note: You must fully charge the battery before using your phone for the first time. A discharged
battery requires 4 hours to recharge fully.
1. With the battery installed, temporarily remove the plastic cover of the
interface jack on the right side of the phone and plug the travel adapter
connector into the jack.
6
Important!: Verify the handset battery is properly installed before connecting the travel adapter. If
the battery is not properly installed and the travel adapter is connected, the handset
continuously power cycles and prevents proper operation.
Incorrect
Correct
Note: This illustration shows both the correct method and the incorrect method for connecting the
charger. If you connect the charger incorrectly, you risk damaging the accessory port and
voiding the phone warranty.
Warning!: If the adapter power plug is installed incorrectly, damage to the accessory port occurs
and voids the phone warranty.
2. Plug the adapter power plug into a standard AC wall outlet.
3. When charging is finished, unplug the adapter power plug from the AC wall
outlet, then disconnect the travel adapter connector from the phone.
Warning!: Failure to unplug the travel adapter before removing the battery can cause damage to
the phone.
4. Replace the plastic cover over the interface jack on the phone.
Getting Started
7
Low Battery Indicator
When the battery is weak with only a few minutes of talk time remaining, a warning
tone sounds and the “Battery low” message repeats at regular intervals on the
display. In this condition, your phone conserves its remaining battery power, not by
turning off the backlight, but by entering the dimming mode. When the battery level
becomes too low, the phone automatically turns off.
Turning the Phone On or Off
1. Press and hold the
key until the phone power-on screen displays.
2. If the phone asks, enter a password and press
. (For further details, see
The Idle screen displays while the phone searches for your network. The
signal strength bars show adequate signal after a network is found.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For more information, see Phone settings on page 55.
3. When you wish to switch off the phone, press and hold the
key.
Setting Up Your Voice Mail
ᮣ
In Idle mode, press and hold the
key. When connected, follow the voice
prompts from the voice mail center.
8
Text Conventions
The following terms and icons appear in this manual to describe the steps and
procedures for using your phone:
highlight
select
UsetheNavigationkey(
item or screen item of interest.
)tomoveahighlightingeffect ontoamenu
After “highlighting” a menu item or screen item, press the
key
to launch, access, or save a highlighted menu item or screen field
of interest.
➔
Used in place of “select” in long “drill down” procedure steps.
Example: “...Settings
➔
Phone
➔
Language...”
Getting Started
9
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Open View of Your Phone
The following diagram shows the main elements of your phone.
1
2
3
13
12
4
11
5
10
6
7
9
8
1. Earpiece: Allows you to hear conversations, ring tones and alerts.
2. Display: Allows you to view date and time, network type, signal strength,
battery power, and icons associated with alerts or alarms.
10
3. Navigation key: Allows you to scroll through menus and adjust the volume during a
call. In Idle mode your Navigation key provides a shortcut to your Contact List, Camera,
your Sound Profile settings and your SMS message window.
4. Left soft key: In the Idle screen, press the Menu (left) soft key ( ) to access
your Main menu. The left soft key allows you to select the function indicated
by the screen text on the bottom left of the display.
5. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Calls log. If you press and hold the key down,
you will initiate the most recent call from the Recent Calls log.
6. Alphanumeric keys: Allows you to enter numbers, characters and symbols.
7. Star key: Press and hold to enter a pause when dialing.
8. Microphone: Allows the other callers to hear you when you are speaking.
9. Space/Silent key: Allows you to enter a space when entering text. Press and
hold to toggle between Normal and Silent modes.
10. Back/Clear key: deletes characters from the display. In Menu mode, returns
to the previous menu level. In Idle mode, launches your Calendar.
11. Power On/Off/Menu Exit key: Ends a call or exits a program. Press and hold
this key briefly to power your phone On or Off. While in the main menu, it
returns the phone to standby mode. Press to reject an incoming call.
12. Right Soft key: In the Idle screen, press the Browser (right) soft key ( ) to
launch the Browser. The right soft key allows you to select the function
indicated by the screen text on the bottom right of the display.
13. OK (Select) key: allows you to confirm your menu choices. In Idle mode,
press
to access the Prepaid menu.
Understanding Your Phone
11
Main Display Layout
The display has 3 areas:
Icons
Text and
graphics
Soft key
functions
Icons
Showsthereceivedsignalstrength. Thegreaternumber
of bars indicates a stronger signal.
Appears when you receive a new text message.
Appears when you receive a new picture message.
Appears when you receive a new voicemail message.
Appears when you set an alarm on your phone.
12
Appears when a call is in progress.
Appears when there is no network coverage available.
When you are out of the service area, you cannot make
or receive voice calls.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Note: The default Sound Profile is Normal. The profile is editable, and the displayed icons may
vary according to the settings. To edit Sound Profile settings, press Menu
➔
Settings
➔
Sound Profile
.
Appears when the Normal Profile (default) is active.
Press and hold the Space key to toggle between
Normal mode and Silent mode. You can edit these Normal
profile settings.
Appears when the Silent Profile is set. In Silent mode,
your phone displays information, but the speaker is
muted and the phone vibrates to alert you. You can edit
these Silent profile settings.
Understanding Your Phone
13
Appears when the Profile is set to Driving. In Driving
mode, the speaker is active and launches the currently
selected ringtone or melody when the associated
notification is activated. This icon is accompanied on
screen by the Audio icon. You can edit these Driving
profile settings.
Appears when the Profile is set to Outdoor. In this case,
the speaker is active, the volume settings are raised to
their highest levels, any currently active ringtones or
melodies are activated, and the phone’s vibrate feature
is activated. You can edit these Outdoor profile settings.
Backlight
A backlight illuminates the display and the keypad when you press any key. The
backlight dims or turns off when no key is pressed within a given period of time.
Go to the Backlight Time menu to modify these settings.
ᮣ
Press Menu
➔
Settings
➔
Display
➔
Light Settings
➔
Backlight Time.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your use. These
functions are arranged in menus and sub-menus. Each menu and sub-menu allows
you to view and alter the settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the
key.
When you access a list of options, your phone highlights the currently active option.
If there are only two options, such as On/Off, your phone highlights the option that
is not currently active, so that you can select it directly.
14
Selecting Options
To view the various functions and options available and to select the one you want:
•
•
Press the appropriate soft key.
To select the function displayed or the option highlighted, press the Select soft key or the
key.
•
To view the next function or highlight the next option on a list, press the Down Navigation
key.
•
•
•
To move back to the previous function or option on a list, press the Up Navigation key.
To move back up one level in the menu structure, press the Back soft key.
To exit the menu structure without changing the settings, press the
key.
Soft Keys
The roles of the left and right soft keys vary depending on the function you are
currently using. The active function for each soft key is shown at the bottom of the
display above each key.
Left Soft Key
Some functions of the left soft key are as follows.
•
•
In the Idle screen, press the Menu (left) soft key
When in a menu mode, the left soft key
to open the Menu screen.
.
function is Select
Right Soft Key
Some functions of the right soft key are as follows.
•
•
In the Idle screen, press the Browser (right) soft key
to launch the Browser.
When in a menu mode, the right soft key
function is Back
.
Understanding Your Phone
15
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
•
•
•
Press and hold the End key to turn on/off your phone.
Briefly press
Press
once to disconnect a call.
to return to standby mode from any menu.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
•
•
•
•
•
Press
once to answer calls.
Enter a number and briefly press
to make a call.
Briefly press
Press
in standby mode to display a list of recent calls to and from your phone.
twice in standby mode to call the most recent number.
to pick up a waiting call.
Press
Navigation Key
Use the directional keys on the Navigation key to browse menus, sub menus, and
lists. Press the Up or Down Navigation keys when jumping to highlighted links on
the web. In a call, press the Up or Down Navigation keys to adjust the speaker
volume.
In the Idle screen, the Navigation keys provide shortcuts to launch applications.
SMS
Camera
Sound Profile
Contact List
16
Section 3: Call Functions
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
In Idle mode, enter the area code and phone number, and press the
key.
Making an International Call
1. Press and hold
. The + character appears.
2. Enter the country code, area code, and phone number, then press
.
Ending a Call
When you want to finish your call, briefly press
.
Manual Pause Dialing
When you call automated systems, you are often required to enter a password or
account number. Instead of manually entering the numbers each time, you can dial
the numbers along with special characters called pauses.
To manually call a number with pause(s) without storing it in your Contact List:
1. In Idle mode, enter a phone number.
2. Press and hold the
key to add a two-second pause. The letter appears
P
where the pause is set.
3. Continue to enter numbers, if desired.
Tip: You can create pauses longer than two seconds by entering multiple pauses.
Call Functions
17
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Contacts, the associated name displays. For more
To redial the number of your last call:
1. From the Idle Screen, press Menu ➔ Recent Calls. The Recent Calls menu
displays the All Calls list with the number of your last call highlighted.
Tip: You can quickly access your Recent Calls from the Idle Screen by pressing
.
2. Press
to dial the number of your most recent call.
Making a Call from your Contact List
You can store phone numbers that you use regularly on the SIM card or in the phone
memory. These entries are collectively called the Contact List. Highlight a number in
your Contact List and press
to call.
Answering a Call
When a call is received the phone rings and displays the caller phone number or
name, if stored in the Contact List.
1. To answer from the Idle Screen, press
.
Note: To set your phone to answer when you flip it open or when you press any key, press
Menu
➔
Settings
➔
Calls
➔
General
➔
Call Answer and select your option. When you
activate the Any Key answer option, you can press any key to answer a call except
and
the Reject soft key.
2. End the call by pressing
.
Note: You can answer a call while using the Contact List or menu features. After ending the call,
the phone returns to the function screen you were using.
18
Recent Calls
The phone stores the numbers of the calls you have Missed, Received or Dialed in
the Recent Calls menu. You can quickly access this menu from the Idle screen by
pressing the
key. If the number or caller is listed in your Contact List, the
associated name displays. Press the Right or Left Navigation key to review All
Calls, Missed Calls, Calls Made and Calls Received in the Recent Calls menu.
To access the Recent Calls menu:
1. From the Idle Screen, press Menu ➔ Recent Calls. The Recent Calls menu
displays the All Calls list with the number of your last call highlighted.
Tip: You can quickly access your Recent Calls by pressing
.
2. Use the Navigation keys to scroll through the Recent Calls lists. Choose from
All Calls, Missed Calls, Calls Made and Calls Received.
3. Press the Options soft key in any of these lists for the following options:
• Details: allows you to view the call details.
• Call Back: allows you to call the number you are viewing.
• Save to Contacts: allows you to save a new contact or update an existing contact.
• Send Message: allows you to send a text message or a multimedia message.
• View Contact Details: allows you to view the contact details stored in your Address Book.
• Delete: allows you to delete the selected call record or all call records.
• Add to Reject List: allows you to add the sending number to your Reject List, where
incoming calls are sent direct to voice mail.
Call Functions
19
Viewing Missed Calls
The number of calls you have missed is displayed on the Idle screen.
To view the number details:
1. Press the View soft key. The most recently missed call is displayed.
Note: If there is a voicemail sent by the same number, associated icons are displayed and can then
be selected.
2. To scroll through the list of missed calls, press the Up or Down
Navigation key.
3. To move to another call type, press the Left or Right Navigation key.
Viewing the Details of a Missed Call
To view the details of a selected missed call, use the following steps:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Select the desired missed call.
3. Press the Options soft key, then select Details.
Calling Back a Missed Call
To call back a missed call number:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Highlight the desired missed call.
3. Press the Options soft key, then select Call Back
.
– or –
Highlight the number and press the
key.
20
Saving a Missed Call to your Address Book
To save the missed call entry to your address book, use the following steps:
1. Press the View soft key. A list of the most recently missed calls is displayed.
2. Select the desired missed call.
3. Press the Options soft key, then select Save to Contacts and follow prompts
to add caller to Contact List.
Sending a Message to a Missed Call
To send a text message or attachment to a missed call entry:
1. Immediately after missing a call, press the View soft key. A list of missed
calls is displayed with the most recently missed call highlighted. Highlight the
number of the missed call you wish to send a message.
2. Press the Options soft key, then select Send Message. Select Text Message
or Multimedia Message. The Create Message screen displays. Create your
3. When you completed your message, press the Send To soft key place the
selected number in the list of Recipients.
4. Press the Options soft key and select Contact List, Recent Recipient or
Group to add other recipients from these lists.
5. When the Recipients list is completed, press the Send soft key to send your
message. Your display returns to the Recent Calls list.
Call Functions
21
Deleting a Missed Call
To delete a missed call entry:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key, then select Delete. Select the option to delete the
Selected missed call or All missed calls. The selected call log(s) are deleted
after you confirm, Yes or No.
Call Time
From the Idle screen, press the Menu ➔ Recent Calls ➔ Call Time to see the
following options:
•
•
•
Last Call Time: shows the length of time for the last call.
Total Made: shows the total length of time for all calls made.
Total Received: shows the total length of time for all calls received.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Adjusting the Call Volume
Adjust the speaker volume during a call by pressing the Up and Down Navigation
keys. Press the Up Navigation key to increase the volume level and press the Down
Navigation key to decrease the volume level.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1. While on a call, press Options ➔ Hold to place your call on hold.
2. You can later reactivate this call whenever you want by pressing the Resume
soft key.
22
Making a new call while you have a call in progress
1. While on a call, press Options ➔ Hold.
2. Enter the new phone number you wish to dial.
3. Press
to dial the second number.
- or -
Press the Options soft key, then select New Call. Enter the number to call
or search in your Contact List. Press to dial the second number.
Once connected, both calls are displayed on the screen.
Note: The caller currently on hold appears greyed-out onscreen.
Switching between the two calls
1. Press Options ➔ Swap. The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that you can continue
conversing with that person.
2. Press
to end the currently active call.
3. When you want to finish, end each call normally by pressing the
key.
Ending a specific call
1. Place the call you wish to end on hold.
2. Press Options ➔ End Held call.
3. Press the Select soft key to end the call on hold.
4. Press
to end the last remaining call.
Call Functions
23
In-Call Options
During a call, press the SpkOn/SpkOff key to turn the Speaker On or Off.
Press the Options soft key to access the following:
•
•
Hold: Places the active call on hold.
New Call: Places the current call on hold and then allows you to enter and dial another
number or access your Contact List.
•
•
•
•
Contact List: allows you to access your Contact List.
Message: Create Text Message, My Messages
Calendar: Allows you to access your Calendar.
Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this feature off
(unmute the keypad), return to this option and select Send Keypad Tone
.
•
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have
selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in
phones for tone dialling, sounding when you press the number keys. This option is helpful
for entering a password or an account number when you call an automated system, like a
banking service.
Using the Speakerphone During an Active Call
While in an active call, you can enable the speakerphone feature.
ᮣ
During a call, press the SpkOn key to activate the speakerphone. Press
SpkOff to deactivate.
Muting or Sending Keypad Tones
These options allow you to turn the key tones off or on. If the Mute Keypad Tone
option is selected, it allows you to press keys without hearing key tones during
a call.
Note: To communicate with answering machines or computerized telephone systems, the Send
Keypad Tone option must be selected.
24
Switching off the Microphone (Mute)
During a call, you can temporarily switch your phone microphone off so that the
other person cannot hear you. Press the Mute/Unmute soft key.
Searching for a Number in Address Book
You can search for a number from the Address Book during a call.
1. Press the Options soft key, then select Contact List.
2. Highlight the Contact List entry.
– or –
Enter the first few letters of the contact into the Search field to highlight the
closest match.
3. Press Options ➔ View or
to view your selected contact.
Call Waiting
The Call Waiting feature alerts you of an incoming call while you have a call in
progress, if this service is supported by the network.
To activate the Call waiting feature, press Menu ➔ Settings ➔ Calls ➔
Voice Call
➔
Call Waiting ➔ Voice Call ➔ Activate.
To answer a call while you have a call in progress:
1. While on a call, press
or press the Accept soft key to answer a new
incoming call. The first call is automatically put on hold when you answer the
new incoming call.
2. To switch between the two calls, press Options ➔ Swap. Swap places the
current call on hold and then activates the previous call.
Call Functions
25
To end a call on hold:
1. Press the Options soft key, then select End Held Call. You can continue with
the remaining call.
2. Press
to end the current active call.
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls
and place them on hold.
If this service is supported by the network, and the SIM has the feature enabled, all
calls can be joined together. You are notified of an incoming call by a call waiting
1. Press
or Accept to answer the first incoming call.
2. Press
or Accept to answer the next incoming call. The first call is
automatically put on hold.
3. Press to join with both of your callers, the active call and the
call on hold, in a single multi-party call.
4. Press to end the call.
➔
26
Silent Mode
Silent mode is convenient when you wish to stop the phone from making a sound, in
a theater, for example.
In Idle mode, press and hold
message appears on screen. The Silent mode icon
until the phone vibrates, the “Silent profile on”
is displayed on the screen.
In Silent mode, your phone speakers are muted. An incoming call causes the phone
to vibrate and light up, depending on the settings of the Silent Phone Settings
feature.
To exit and reactivate the previous sound settings, press and hold
again until
the previous Sound Profile is restored. The Silent mode icon is no longer displayed.
Call Functions
27
Section 4: Menu Navigation
This section explains the menu navigation for your phone. Your menu options are
controlled by the SIM provided by your service provider.
Use the Navigation keys to scroll through menus and sub-menus or use the shortcut
keys.
Accessing Menus
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to scroll to a main menu. Press the Select soft key or
the
3. If the menu contains sub-menus, highlight your menu selection and press the
Select soft key or
4. To return to the previous menu level, press the Back soft key.
key to enter the menu.
.
5. To exit the menu without changing the settings, press
.
Using Shortcuts
Numbered menu items and options can be accessed by using their shortcut
numbers. In Menu mode, Main Menus can be accessed by pressing the number
keys (1 to 9) corresponding to their location on the screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press
3. Press
4. Press
for Settings.
for Phone
for Language.
28
Section 5: Messages
This section describes how to send or receive text messages.
Creating a New Text Message
1. In Idle mode, press Menu ➔ Messages ➔ Create New Message
➔
Text Message to access the SMS message window.
Tip: In Idle mode, to create an SMS message, press the Up Navigation key.
2. Compose your message text.
3. You can press the Options soft key to choose from the following options:
•
Insert: Allows you to insert information from the following sources: Text Templates,
Contact List, Favorites URL.
•
•
•
Save to: Allows you to save your message to your Drafts folder or to My Folder.
Select Language: Allows you to choose from these languages: English or Español.
Input Mode: Allows you to set the text Input method: ab, Ab, AB, T9ab, T9Ab, T9AB,
123 or Symbols.
•
Back: Asks you if you want to Save to Drafts? Yes or No, or deletes your unsent message
and returns to the Massaging display.
4. When you completed your message, press the Send To soft key to display the
Recipients To field.
5. Enter the number for the recipient in the field provided, or press the Options
soft key to select a recipient from your Contact List, your Recent Recipients
phone number or email, or from one of your Group contacts.
– or –
You can select Save to: to save your unsent message to Drafts or My Folder.
6. Press Send to send your message.
Messages
29
Creating a New Picture Message
1. In Idle mode, press Menu ➔ Messages ➔ Create New Message
➔
Multimedia Message. The New multimedia message screen displays with
the Subject field highlighted.
2. To create a subject for your message, press Options ➔ Add. Enter the
Subject text using the keypad. Press Options ➔ Save.
3. Press the Down navigation key to highlight the Graphic field.
4. To add a graphic to your message, press Options ➔ Add and select Take
Photo, My Photos, or Downloaded Graphics.
5. Select My Photos to see thumbnail images of your photos.
6. Highlight the photo you wish to add and press the Add soft key. The New
multimedia message screen appears in the display with the selected photo in
the Graphics field.
7. Press the Down navigation key to highlight the Audio field.
8. To add audio to your message, press Options ➔ Add and select Record
Audio, Recorded Audio, or Downloaded Tones.
9. Record a new audio file or select an existing file or downloaded tone. Press
the Add soft key.
10. Press the Down navigation key to highlight the Message field.
11. To add a text message to your multimedia message, press Options ➔ Add.
Enter the message text using the keypad. Press Options ➔ Save. The New
multimedia message screen appears in the display with your entries.
30
12. When you are finished with your message, you can press the Options soft key
to make changes, additions, edits such as background color, add a business
card or other attachments, modify send settings and preview your message.
– or –
Press the Send To soft key. The Send screen appears in the display showing
the To list.
13. Enter your recipient and press Send to send your message.
– or –
Press the Options soft key to choose from other options such as add
recipients from you contact list or groups, from recent recipients, or save to
drafts or to My Folder.
Viewing Received Messages
1. In Idle mode, your phone displays the number of voicemails you have
received and the number of new messages you have received.
2. Press the Connect soft key or the
key to call your voicemail and listen to
key to view your messages.
your messages.
– or –
Press the View soft key or the
3. When you have finished, press the Exit soft key or the
key.
Using Message Options
Message options at the Inbox level differ according to the message type, what you
have done with the message, and whether you are viewing the message.
While viewing the list of messages in the Inbox, you can highlight a message and
press the Options soft key to access the following message options:
Messages
31
•
•
•
•
•
View: Allows you to view your message.
Call Back: Returns the call.
Delete: Deletes a single selected message or you can select multiple messages for deletion.
Move to My Folder: Allows you to move the selected message to My Folder.
Move to SIM Card/Phone: Allows you to move the selected message to your SIM Card or
to your phone.
•
•
Sort by: Allows you to sort your messages by date, read/unread, sender, type, size
or subject.
Lock/Unlock: Allows you to lock or unlock the deletion of the highlighted message.
While viewing a message in the Inbox, press the Options soft key to access the
following message options:
•
•
•
•
•
•
Reply: Allows you to compose and send a reply to the message.
Call Back: Returns the call.
Forward: Allows you to forward the message to another recipient.
Delete: Deletes the viewed message.
Move to My Folder: Allows you to move the selected message to My Folder.
Move to SIM Card/Phone: Allows you to move the selected message to your SIM Card or
to your phone.
•
•
•
Add to Block List: Allows you to add the sender or caller to a block list.
Extract Address: Allows you to extract the address to add to your contacts or send a reply.
Lock/Unlock Allows you to lock or unlock the deletion of the highlighted message.
:
Inbox
The Inbox message box stores copies of messages you received.
Outbox
The Outbox stores copies of outgoing messages, both those sent successfully and
those that failed.
32
Sent
The Sentbox message box stores copies of messages you sent.
Drafts
The Drafts message box stores unsent messages that you want to edit or send at a
later time.
Voicemail
Choosing this option dials your voicemail.
My Folder
You can elect to store messages in My Folder.
Templates
Templates are available for creating messages and can be edited or deleted.
Using Message Templates
Your phone has Text templates that you can retrieve and apply when creating a
message. You can edit the applied template as needed before sending a message.
1. In Idle mode, press the Menu ➔ Messages ➔ Templates. The Text
Templates display.
2. Highlight a current template message and press the Options soft key to
access the following options:
• Send via: allows you to create and send a Text Message/Multimedia Message using the
selected template.
• Edit: allows you to change the currently selected template.
• Delete: deletes the currently selected template or multiple templates.
3. When you have finished, press
.
Messages
33
Delete All
The Delete All function allows you to clear messages you no longer wish to store.
You can delete the messages in the selected message folder(s) or you can choose
to delete all messages at one time.
Messaging Settings
The Messaging Settings menu allows you to view and modify settings for text
messages, multimedia messages, voicemail and, if allowed by your service
provider, broadcast messages.
You can set up various options for using messaging services.
1. In Idle mode, press Menu ➔ Messages ➔ Messaging Settings.
2. Select the message settings you want to change.
• Text Message
• Multimedia Message
Number, Message Class, Creation Mode and Default Style.
• Voicemail allows you to Connect to Voice Server.
• Broadcast Message: available only if allowed by your service provider.
:
allows you to access Send Settings and Block Number list.
:
allows you to access Send Settings, Receive Settings, Block
:
3. Press the Select soft key or
to access the highlighted settings menus.
4. Press Save when finished.
Text Message
The following options are available:
•
•
Send Settings: displays the Email Gateway set by your service provider.
Block Number: allows you to create a block number list.
Multimedia Message
•
Send Settings: allows you to set Priority, Expiration, Delivery After options.
Receive Settings: allows options to Reject Anonymous messages and Allow
Advertisement.
•
34
•
•
•
•
Block Number: allows you to create a block number list.
Message Class: allows you to choose a setting: Text, Image Basic or Image Rich.
Creation Mode: allows you to choose a setting: Warning, Free or Restricted.
Default Style: allows you to choose: Font Color, Font Size, Bold, Italic, Underline,
Strikethrough, Background Color and Page Duration
Voicemail
The following options are available:
•
Connect to Voice Server: connects you to your voice server.
Broadcast Message
Broadcast Message displays if allowed by your service provider.
Used Space
Used Space shows the number of messages stored on your phone and on your
SIM Card.
•
•
•
Text Message: displays the number of messages stored at these locations: Phone, SIM,
Inbox, Sent, Outbox, Drafts, My Folder.
Multimedia Message: displays the space Available, and the space used in these locations:
Inbox, Sent, Outbox, Drafts, My Folder.
Push Message: displays the number of push messages stored.
Messages
35
Section 6: Browser
This section outlines how to launch your Browser, how to navigate to other pages
on the Web, and how the keys on the keypad are used with the Web application.
You can surf the Web and download ringtones and wallpapers using your phone.
Launching the Browser
ᮣ
In standby mode, press the Right soft key to launch the Browser. A list of
categories, each representing one or more web sites, appears in the display.
Exit the Browser
ᮣ
To exit the Browser, press
.
Using the Browser
When you use your Browser to access the Web, some of the keys operate differently
than during a normal phone call. You can act upon options or links by using the soft
keys.
Soft Keys
The bottom of the display shows browser commands above the Left and Right soft
keys used to execute the commands. The soft keys change their function
depending on the application.
Using Links
Links have several purposes, such as jumping to a different page, to a different
site, or even initiating a phone call. Links are shown underlined. You can normally
press
to select a link when it is highlighted.
36
How the Web Keys Work
The following table lists the Web keys and their functions.
•
•
Navigation keys — Use to browse lists and options.
Back Key — A browse, back-up key. Press once to back up one page. Press and hold to go
back to home page. Press to clear the last number, letter, or symbol entered. Press and hold
to completely clear the display.
•
•
•
•
Pound Key — Press to insert a space when entering text.
Number 1 thru 9 — Use the number keys to select items in a menu if they are numbered.
End Key — Press to exit the Web and return the phone to standby mode.
Left Soft Key — Press to activate the command that appears above it in the display. The
Options soft key provides these options: Go to, Back, Go to Homepage, Reload, Send URL,
Enter URL, Add to Favorites, View Favorites, Go to Messaging, Go to My Folder, Disconnect,
History, Show URL, Delete Cookies and About Browser.
•
Right Soft Key — Press to activate the command that appears above it in the display.
Browser
37
Section 7: Camera
This section explains how to use the camera on your phone. You can take
photographs by using the built-in camera functionality.
Using the Camera
Using the camera module in your phone, you can take photos of people or events
while on the move. Additionally, you can send these photos to other people in a
Picture Messaging message or set a wallpaper or picture ID image.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another person’s privacy.
Taking a Photo
Your camera produces photos in JPEG format. To take a photo using the current
camera settings, do the following:
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on
the photo.
1. In Idle mode, press Menu
➔
Camera
➔
Take Photo. The following soft key
options appear:
• Take Photo
(
): allows you to take a photo.
• Gallery: allows you to view your stored photos.
2. Using the display as a viewfinder, point the camera lens on the back of your
phone at your subject. When the image you wish to capture appears in the
display, press
(
). You photo is saved to the My Photos folder.
38
3. After taking a photo, the following options are available while viewing
the photo:
• Options: allows you to select Take Another
,
Send via Multimedia Message, and Set as
Wallpaper or Caller ID.
• Send: allows you to go to New Multimedia Message screen. For sending a Multimedia
• Delete: press the right soft key (Delete) and confirm Yes to delete or No to keep
the photo.
Setting Camera Options
The Camera Options let you adjust default camera settings to suit the current
conditions and subject of your photo. The following settings are available.
•
Shooting Mode: only selection is Single Shot mode, which allows you to take a single shot
and view it before returning to the shooting mode or to take a single shot and return to
camera mode without reviewing. To change this option, refer to Single Shot in the Settings
options on page 39.
•
•
•
Resolution: select from the following image sizes: 640 x 480
128 x 96
Timer: select from the following time intervals to delay before taking a picture: Off
3 Seconds 5 Seconds 10 Seconds
White Balance: select from the following choices to adjust to the available light: Auto
Daylight Incandescent Fluorescent Cloudy. The viewfinder in your display shows the
effects of the settings.
Effects: select from the following: No Effects
Emboss Sketch Antique Moonlight. The viewfinder in your display shows the effects
of the settings.
Information: displays 1 Timer and # Viewfinder Mode
,
320 x 240, 128 x 128,
.
,
,
,
.
,
,
,
,
•
,
Black & White, Negative, Sepia,
,
,
,
•
•
.
Settings: select from General and Camera settings: General (Zoom Sound,
Brightness Sound), Camera (Shutter Sound, Viewfinder Mode, Scene Program,
Metering Exposure, Single Shot).
Camera
39
Viewing Photos
1. In Idle mode, press Menu
➔
Camera
➔
Go to My Photos. Your photos display
in Line View or Thumbnail View.
– or –
In Camera mode, press the right soft key (Gallery) to access My Photos.
2. In the My Photos screen, press Options to see the following:
• View: allows you to enlarge the thumbnail view of the selected photo.
Note: While viewing a photo, press Options
➔
➔
Full Screen View to view the image in full screen. To
Normal View.
return to normal view, press Options
• Display Mode: allows you to select Line View or Thumbnail View.
• Send: allows you to send the selected photo via Multimedia Message.
• Set as: allows you to set the selected photo as Wallpaper or Caller ID.
• Delete: allows you to delete a selected photo or multiple selected photos.
• Rename: allows you to rename the selected photo.
• Slide Show: allows you to play the available images in My Photo in a slide show.
• Lock/Unlock: allows you to lock or unlock a photo file.
• Properties: allows you to view these properties: Name, Date, Format, Resolution, Size,
Quality and Lock/Unlock settings.
40
Section 8: Applications
A number of preloaded applications are available on your phone. These are some of
the applications available from the Tools menu, the Calendar menu and the My Stuff
menu: Alarms, Calculator, Tip Calculator, Converter, Timer, Stopwatch, World Time,
Calendar, default and downloaded Audio and Picture.
Tools
The Tools menu provides access to: Alarms, Calendar, Calculator, Tip Calculator,
Converter, Timer, Stopwatch and World Time. Some of these applications are
described in this section.
Opening Tools Menu
In Idle mode, press Menu ➔ Tools. The following submenus display:
•
•
Alarms: Allows you to set an alarm to go off once, or daily, at a specified time.
Calendar: Your Calendar applications allows you to enter events and view them by the day,
the week, the month or by event categories.
•
Calculator: Allows you to perform calculations, including addition, subtraction,
multiplication, and division.
•
•
Tip Calculator: Allows you to calculate service gratuities with a minimum of key presses.
Converter: Allows you to convert currency, length, weight, volume, area and temperature
from one system or increment to another.
•
•
•
Timer: Allows you to set a timer.
Stopwatch: Allows you to view the amount of time in up to 30 intervals.
World Time: Allows you to view the current time of day or night in another part of the world.
Applications
41
Alarms
You can set an alarm to alert you once, or daily at a specified time. Once set, the
alarms are easy to change or turn off completely.
1. In Idle mode, press Menu ➔ Tools ➔ Alarms. The following options appear
in the display:
• Wake-up Alarm
•
•
Alarm 1
Alarm 2
• Alarm 3
Alarm 4
•
2. Select an Alarm. The alarm screen appears in the display containing the
following options: the alarm name, the on/off setting, the time, AM/PM, alert
type, alarm tone options, the alarm volume setting, days if the week to sound,
snooze option and auto power on/off setting.
3. Highlight the options you wish to change, then select values for the options
using the Left and Right navigation keys.
4. When you’re finished entering and selecting values for the alarm, press
.
The alarm is set and the alarm icon ( ) appears in the top of the display.
Calendar
Your Calendar applications allows you to enter events and view them by the day, the
week, the month or by event categories. While viewing the calendar, the current
date is highlighted and days with scheduled events are marked by a bracket.
42
Calendar Options
You can add and delete events and set alarms to remind you of your appointments,
anniversaries or other events. In Calendar view, press the Options soft key to choose
from the following:
•
•
View by: Allows you to choose the calendar view: Day, Week or Month.
Create: Allows you to choose the category for your new event: Appointment, Anniversary,
Miscellaneous, Task,
•
•
•
•
Go to: Allows you to view the current day’s calendar or to jump to another date that you
specify: Today, Date
Event List: Allows you to view your events by category: Appointment, Anniversary,
Miscellaneous, Task,
Delete: Allows you to delete your selection by a specified range of dates or by the month or
to delete all events: Selected, Periods, This Month, All
Settings: Allows you to choose your calendar Starting Day: Monday or Sunday, and to
choose Default View by: Month, Week, Day.
•
•
Missed Alarm Event: Allows you to view any missed alarm events.
Used Space: Allows you to view the total number of events stored on your Calendar, up to
100 and the number of events by category: Appointments, Anniversaries, Miscellaneous,
Tasks
Enter an Event
1. To access your Calendar in Idle mode, press Menu ➔ Tools ➔ Calendar
.
– or –
Press
.
2. Press the Options soft key and select Create.
3. Select from the following options: Appointment, Anniversary, Miscellaneous
or Task.
4. Enter your information in the fields provided in your phone display.
Applications
43
View an Event
1. To access your Calendar in Idle mode, press Menu ➔ Tools ➔ Calendar.
2. Use the Navigation keys to move through the calendar and highlight a desired
date.
3. Open the highlighted date by pressing . A list of scheduled events appears
in the display.
4. Select the desired event. Information for the selected event appears in the
display.
Calculator
You can perform calculations, including addition, subtraction, multiplication, and
division using the phone.
ᮣ
In Idle mode, press Menu ➔ Tools ➔ Calculator to display your calculator.
Tip Calculator
Tip Calculator calculates your gratuity and the individual payment for groups.
Calculations are based on the total amount of the check, a selected percentage, and
the number of people paying.
1. In Idle mode, press Menu ➔ Tools ➔ Tip Calculator to display the Tip
Calculator screen with the Bill field highlighted.
2. Use the keypad to enter the total amount of the bill. To include a decimal
point, press the
key.
3. If needed, highlight the Tip field and use the keypad to change the tip
percentage.
44
4. If needed, highlight the # paying field and use the keypad to change the
number of persons paying.
5. The amount of the tip, the bill total, and the amount owed by each person
appears in the lower half of the screen.
Converter
The conversion menu provides the following conversion features: currency, length,
weight, volume, area and temperature.
To convert a currency, length, weight, volume, area, or temperature, do the
following:
1. In Idle mode, press Menu ➔ Tools ➔ Converter to display the Converter.
2. Select the conversion feature you wish to use. The selected conversion
feature screen appears in the display.
3. Use the Left and Right navigation keys to select the unit to convert from.
4. Highlight the quantity field.
5. Use the keypad to enter the quantity you want to convert.
6. Highlight the field to enter the unit of measure to convert to.
7. Use the Left and Right navigation keys to select the desired units. The
converted quantity displays in the new quantity field.
Note: To include a decimal point, press
.
Applications
45
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange rates as default
values. To review and/or change a default exchange rate to the current exchange
rate, do the following:
1. In Idle mode, press Menu ➔ Tools ➔ Converter ➔ Currency to display the
Converter screen with the USD (U.S. Dollars) currency highlighted in the From
Unit field. Use the Left and Right navigation keys to display a different
currency in the From Unit field.
2. Press Options ➔ Currency Rates. The Currency Rates list for the USD (U.S.
Dollars) currency appears in the display.
3. Select the currency exchange rate you want to change.
4. To edit the highlighted exchange rate, press Options ➔ Edit
.
5. Use the keypad to change the current exchange rate. Press the Save soft key
to save the changed exchange rate.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to obscure currencies by
adding exchange rates for these currencies. To add a currency and its exchange
rate to the Currency Converter, do the following:
1. In Idle mode, press Menu ➔ Tools ➔ Converter ➔ Currency to display the
Converter screen with the USD (U.S. Dollars) currency highlighted in the From
Unit field. Use the Left and Right navigation keys to display a different
currency in the From Unit field.
2. Press Options ➔ Currency Rates. The Currency Rates list for the USD (U.S.
Dollars) currency appears in the display.
46
3. Press Options ➔ Add Currency.
4. Enter the name in the Enter New Currency field and the rate in the Enter
New Rate field. Press the Save soft key to save the new currency.
Currency — Deleting Exchange Rates
You cannot erase the preloaded currencies from the Exchange Rate list. You can
erase a currency that you have added to the list by doing the following:
1. In Idle mode, press Menu ➔ Tools ➔ Converter ➔ Currency to display the
Converter screen with the USD (U.S. Dollars) currency highlighted in the From
Unit field. Use the Left and Right navigation keys to display a different
currency in the From Unit field.
2. Press Options ➔ Currency Rates. The Currency Rates list for the USD (U.S.
Dollars) currency appears in the display.
3. Highlight the currency exchange rate to erase.
4. Press Options ➔ Delete. You are prompted to confirm.
Timer
You can use this menu to set a timer.
1. In Idle mode, press Menu ➔ Tools ➔ Timer.
2. Press the Set soft key, set your time and press the OK key.
3. Press
to start, pause and resume the timer count down.
Applications
47
Stopwatch
You can use this menu to set a stopwatch.
1. In Idle mode, press Menu ➔ Tools ➔ Stopwatch.
2. Press
to start the stopwatch count
3. Press
at the start of each succeeding event/lap to record the completion
time for the previous event/lap.
4. When finished, press the Stop soft key.
5. Press the Reset soft key to erase all recorded event/lap times.
World Time
World Time lets you view the time of day or night in another part of the world. World
Time displays time in the 24 different time zones around the world.
1. In Idle mode, press Menu ➔ Tools ➔ World Time. A world map displays.
2. To display the time zone and city that you wish to view, use the Left and Right
navigation keys.
3. Press the Set DST soft key to turn on or off daylight saving time.
4. Press
to keep the current home time zone and return to the Tools menu.
48
My Folder
The My Folder menu allows you to manage downloaded and preloaded tones and
graphics. You can store your files in the Audio and Picture folders and view the
available memory in the Used Space display.
In Idle mode, press Menu ➔ My Folder.
•
Audio: allows you to customize your phone with downloaded or preloaded tones or your own
recorded audio.
–
Tones: allows you to launch your browser to Buy Ringtones, to save Downloaded Tones to
your folder. You can play preloaded Default Tones and use these default tones and your
downloaded ringtones to customize your phone.
–
Recorded Audio: allows you to store your own audio files in your Recorded Audio folder.
•
Picture: allows you to launch your browser to Buy Graphics, to save Downloaded Graphics
to your folder. You can select one of seven preloaded Default Wallpapers to display or
choose to display the seven wallpapers randomly. You can use these default wallpapers and
your downloaded graphics to customize your phone.
–
–
–
Buy Graphics: launches your browser where you can shop for graphics.
Downloaded Graphics: folder for storing your downloaded graphics.
My Photos: folder for storing your photos. Available options are: View, Display Mode, Send,
Set as, Delete, Rename, Slide Show, Lock/Unlock and Properties.
Default Wallpapers: allows you to choose from seven wallpapers to customize
your wallpaper.
–
•
Used Space: allows you to view the available memory in My Folder and the used memory in
your Audio and Picture folders.
Applications
49
Section 9: Understanding Your Contacts
This section allows you to manage your Contacts by storing contacts’ names and
numbers in your Contact List.
Dialing a Number from the Contact List
Once you have stored phone numbers in the Contact List, you can dial them easily
by highlighting the number you wish to call and selecting Options ➔ Call.
Finding a Contact List Entry
You can store phone numbers and their corresponding names onto your SIM card.
1. In Idle mode, press the Menu soft key, then select Contacts ➔ Contact List.
2. Enter the first few letters of the name.
The Contacts entries are then listed, starting with the first entry matching
your input.
3. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
4. Once you have found the entry, press
to dial the number, or press the
Options soft key to access the Contact List entry options.
Contact List Entry Options
While in the Contact List with any of the entries highlighted, press the Options soft
key to use access the following options:
•
•
View
to the Contact List.
:
provides you with details about that contact entry. Press the Back soft key to return
Send Message allows you to send a Text Message/Multimedia Message to the selected
:
entry.
•
•
Add New Contact
:
allows you to add a new entry to either your Phone or SIM card.
Call allows you to call a currently selected entry.
:
50
•
Copy to Phone/SIM Card: allows you to copy all or a selection to your Phone/
SIM Card.
•
•
•
Send Business Card: allows you to create a business card for your contact.
Assign Speed Dial: allows you to assign a speed dial number to the selected contact.
Delete: allows you to delete the selected contact, multiple contacts or all contacts from the
Phone or the SIM Card or from both.
•
Select Language: allows you to select English or Español.
Adding a New Contact
In the Idle screen, enter the number you wish to call and press Options ➔
Save ➔ New. Select the type of number: Mobile, Home, Office, Fax or Other.
At the prompt enter the name of the contact in the Name field.
Also, you can create a new contact from the Idle screen by pressing Menu ➔
Contacts ➔ Add New Contact. Enter the Name, number and other information in
the fields provided to add the contact to your Contact List.
Group
You can elect to assign your contacts to a group or category, such as Family, Office,
Friends, or Not Assigned. You can edit, delete or create new groups to manage your
contacts. The Not Assigned group includes all contacts and can not be edited or
deleted.
Speed Dial List
You can assign up to 8 speed dial number for your contacts entries. The first speed
dial number is reserved for voicemail.
In Idle mode, press Menu
➔
Contacts
➔
Speed Dial List. Select an Empty position
in your speed dial list. Press the Options soft key, then select Add. When your
Contact List displays, highlight the contact you wish to assign to that position
and press
to save.
To quickly call a contact from the Idle screen, press and hold the number assigned
in the Speed Dial List.
Understanding Your Contacts
51
Reject List
You can store and add numbers to your Reject List to immediately direct calls from
those numbers to your voicemail.
In Idle mode, press Menu ➔ Contacts
➔
Reject List to view your list. Press the
Options soft key to Edit, Add New or Remove numbers from your list.
You can enter a number to be rejected, select a number or multiple numbers from
your Contacts, from a Group, from FDN Contacts, from Recent Contacts or you can
elect to reject all Unknown numbers. You can later remove a selected number or all
numbers from your reject list.
FDN Contacts
When the FDN (Fixed Dialing Number) mode is set to On, you can only dial the
numbers in your Contacts that you have designated as FDN Contacts.
Note: To set the FDN mode to on, in Idle mode, press the Menu ➔ Settings
Set FDN Mode. Obtain Passcode from your Service Provider.
➔
Phone
➔
Security
➔
Contacts Settings
You can choose to View contacts stored on your Phone only or on your SIM Card
only. Or you can View All contacts. You can save, copy and delete Phone and SIM
Card entries on your phone or choose to delete all.
In Idle mode, press the Menu ➔ Contacts
➔
Contacts Settings to manage the
following settings for your contacts entries:
•
•
•
My Business Card: Allows you to enter your information in the fields provided to set
up your business card.
Save New Contacts to: Allows you to choose from these options: Phone, SIM Card
or Ask on Saving.
View Contacts from: Allows you to choose to view all contacts, the contacts from
you phone only or from your SIM Card only.
•
Sort Contacts by: Allows you to sort your contacts by first name or by last name.
52
•
•
Own Number: Displays you number assigned to your phone.
Copy All to: Allows you to choose to copy all contacts to your phone or to your
SIM Card.
•
•
Delete All: Allows you to delete all contacts, to delete all contacts from your phone
or to delete all from your SIM Card.
Used Space: Displays the number of contacts stored on your phone and on your
SIM Card.
Own Number
The Own Number menu selection stores the number assigned to the SIM in your
phone. From the Idle screen, press Menu
➔
Contacts
➔
Contacts Settings
➔
Own Number to view your assigned number.
Note: You can change the number assigned to your SIM that displays in the Own Numbers menu,
but entering another number prevents you from making or receiving calls on the handset.
You may also add other names and numbers into your phone for easy referral.
SIM Management
The SIM Management menu allows you to copy your stored contacts from your
phone to your SIM, from your SIM to your phone and to delete contacts from your
SIM.
From the Idle screen, press Menu
➔
Contacts
➔
SIM Management and make your
selection.
Understanding Your Contacts
53
Section 10: Changing Your Settings
This section includes tips on how to use some of use some of your phone features,
as well as how to change and customize the display settings, call handling, security
settings, and other settings associated with your phone.
Sound Profile
You can customize various sound profiles for your phone by changing the sound
settings.
1. In Idle mode, press the Menu ➔ Settings
➔
Sound Profile.
2. Highlight one of the following sound profiles:
• Normal: The Normal profile allows you to customize your alerts.
• Silent: The Silent profile causes the speaker to be muted and the phone only
vibrates or displays information on the LCD.
• Driving: The Driving profile keeps the speaker active and will launch the
currently selected ringtone or melody when the associated notification is
activated.
• Outdoor: The Outdoor profile keeps the speaker active, the volume settings are
raised to their highest levels, any currently active ringtones or melodies are
activated, and the vibrate feature is activated.
3. Press the Edit soft key to Edit the highlighted profile.
4. Press the Save soft key when you are finished.
54
Display
The Display menu allows you to change settings for the Main Display, the Front
Display and the Light settings. In Idle mode, press the Menu
➔
Settings
➔
Display.
•
Main Display: Allows you to customize the appearance of your display and menus by
making selections in Wallpaper, Idle Screen Display, Main Menu Style and Dialing Display.
Front Display: Allows you to add a Clock and a Screen Slogan to your front display.
Light Settings: Allows you to adjust LCD Brightness, Backlight Time and Front
LCD Contrast.
•
•
Time & Date
This menu allows you to change the format for the current time and date display. In
Idle mode, press the Menu ➔ Settings
➔
Time & Date.
Phone
The Phone settings menu allows you to set the language option for your phone to
Automatic, English or Español and to turn on or off the Keypad auto-lock feature.
ᮣ
In Idle mode, press Menu ➔ Settings
➔
Phone.
Note: When the Keypad auto-lock feature is on, your phone automatically locks your keypad when
the phone has been idle for a while. To unlock your phone, press the Unlock soft key, then
press OK
.
The following options are available. Use the Down Navigation key to scroll to and
set options:
•
Language
:
Allows you to select a display language. Press the Save soft key to save your
new selection. Options include the following:
–
Automatic
card used.
English The selected phone language is changed to English.
Español: The selected phone language is changed to Spanish.
:
The language is automatically selected according to the language of the SIM
–
–
:
Changing Your Settings
55
•
Shortcuts: Allows you to change the menus that display when you press the Navigation
keys in Idle mode.
•
•
•
•
Own Number: Displays the number assigned to your phone.
Reset Phone: Displays: All settings reset to factory defaults. Continue?
Restore Phone: Displays: All settings reset to factory defaults and all user data will be
deleted. Continue?
•
•
Airplane Mode: Select On or Off to set your phone to Airplane Mode.
T-Coil Mode: Turn On or Off T-Coil Mode.
Security
Security enables you to restrict the use of your phone by the others and to restrict
the types of calls. Various codes and passwords are used to protect the features
of your phone.
Use the Up or Down Navigation key to scroll to and set the following options:
•
Lock Phone: When enabled, the phone is locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on. Once the correct password has been
entered, you can use the phone until you switch it off. The following options are available:
–
–
Off
On:
:
you are not asked to enter the phone password when you switch on the phone.
you are required to enter the phone password when you switch on the phone.
•
•
•
Check PIN Code: Allows you to select Off or On.
Set FDN Mode: Allows you to select Off or On. Obtain Passcode from your Service Provider.
Change Phone Password Allows you to change your password to a new one. You must enter
:
the current password before you can specify a new one. Once you have entered a new
password, you are asked to confirm it by entering it again.
•
•
Change PIN Code: Allows you to change your current PIN, provided the PIN check feature is
enabled. You must enter the current PIN before you can specify a new one.
Change PIN2 Code: Allows you to change your current PIN2 Code. You must first enter the
current PIN2 (obtained from your service provider) before you can specify a new one. Enter
a new PIN2 Code and confirm your entry.
56
Note: This lock code is typically the last four digits of the current phone number or it can be
obtained from your service provider’s customer service representative.
Calls
The Call menu allows you to set up these options:
•
General: allows you to set up options for Show My Number, Call Answer, Call Status Tones
and Alerts on Call.
•
Voice Call: allows you to set up options for Call Waiting and Auto Redial.
Bluetooth
The Bluetooth settings allow you to turn on or off the Bluetooth function. In Idle
mode, press Menu ➔ Settings
➔
Bluetooth
Activation: used to turn Bluetooth On or Off.
My Devices: used to Search New Device or Paired Device.
Bluetooth Services
.
•
•
•
:
–
–
Headset: used to make incoming and outgoing call via Bluetooth.
Handsfree: used to make incoming and outgoing call via Bluetooth Car Kits.
Applications Settings
The Applications menu allows you to customize your phone by choosing options in
these settings menus: Messaging, Camera, Calendar and Contacts.
•
•
Messaging Settings: Allows you to set up options for Text Message, Multimedia Message,
and to connect to your Voicemail number. You can also make a Broadcast Message, if this
option is available on your SIM.
Camera Settings: Allows you to set up the following camera options:
–
General: Allows you to turn on or off: Zoom Sound, Brightness Sound.
–
Camera: Allows you to choose from the following options: Shutter Sound (Shutter1,
Shutter2, Shutter3), Viewfinder Mode (Full Screen, Full Screen & Indicator, Full Screen &
Guideline, Actual Screen), Scene Program (Normal, Night-time Landscape), Metering
Exposure (Normal, Center-weighted, Spot), Single Shot (Take and Review, Take and Return).
Changing Your Settings
57
•
•
Calendar Settings: Allows you to elect to start your calendar on Monday or on Sunday, and
choose a default view: Month, Week or Day.
Contacts Settings: Allows you to choose options to manage your Contacts in your Contact
Used Space
The Memory menu allows you to view the memory usage on your phone. In Idle
mode, press Menu ➔ Settings
➔
Used Space to view the memory usage in the
following categories:
•
•
•
•
•
Shared Memory: Shows the total shared memory available.
Messages: Shows the number of messages stored on your phone and on your SIM Card.
My Folder: Shows the memory usage in your Audio and Picture folders.
Calendar: Shows the number of events scheduled on your calendar.
Contacts: Shows the number of contacts stored on your phone and on your SIM Card.
About Phone
The About Phone menu provides information regarding open source licenses. Your
phone displays the following: This product includes certain free/open source
software. The exact terms of the licenses, disclaimers, acknowledgements and notices
are available on the Samsung’s website http://opensource.samsung.com
.
58
|