Headset overview
Check the accessories
Charge your headset
• Charge the headset until the red light on the
headset turns to blue.
• The headset will be fully charged in approximately
3 hours.
Thank you for purchasing the Samsung Bluetooth
Stereo Headset SBH500, we hope you will be delighted
with its operation.
Make sure you have the following items with your
headset: Travel adapter, User’s Guide
Charge the headset's battery fully before using
the headset for the first time.
Quick Start Guide
1
Open the adapter jack cover and plug the
travel adapter into the adapter jack.
NOTES:
NOTE:
Take a moment before you get started to familiarize
yourself with your new headset.
Bluetooth Stereo Headset
• The headset cannot be used while charging.
• Use only a Samsung-approved charger or adapter.
The items supplied with your headset and the accessories
at your Samsung dealer may vary, depending on you
country or service provider.
SBH500
Get connected in 4 quick steps
2
Plug the travel adapter into the AC wall
outlet
.
Supported Bluetooth profiles:
• Advanced Audio Distribution Profile
• Audio/Video Remote Control Profile
• Headset Profile
Charge your headset
Adapter
jack
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
ON/OFF
• Hands-Free Profile
Switch
Talk button
Indicator
Test and use
Light
REW Button
Volume Control
Buttons
Play/Pause/
Stop Button
FF Button
Start here
Put your headset in
pairing mode
Before you can use your headset, you must pair it
with your phone.
Turn on Bluetooth on your
phone and pair with headset
Test and use
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1
Set your Bluetooth phone to discover the
headset by following your phone user’s guide.
Using your headset
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
1
Place the headset over your ear.
See Wear the headset on the reverse
side of this guide.
• If you turn on the headset for the first time,
it proceeds into pairing mode immediately.
Typically, the steps involve going to the Settings,
Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Bluetooth devices.
See Features and Functions Guide
on the reverse side of this guide
for information on using your
SBH500.
Internet Address:
accessories
• If you have paired the headset with other
Bluetooth devices, make sure that the headset
is off (see Turn headset on or off on the reverse
side of this guide). Then turn on the headset with
2
3
On your phone, make a call to the number
you want.
Your phone will find the Samsung SBH500
headset.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
Customer Care Center:
1-888-987-4357
pressing and holding
. After the indicator
2
3
Select Samsung SBH500.
sequentially flashes blue, red, and purple twice,
it will turn to blue.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
When the phone asks if you want to pair with it,
confirm by selecting Yes or OK.
4
Enter the headset passkey or PIN, 0000.
Guide No.: GH68-xxxxxA
09/2007. Rev. 1.0
|