Samsung A640 User Manual

Sprint PCS Vision® Phone A640 by Samsung®  
www.sprint.com  
© 2006 Sprint Nextel. All rights reserved. Sprint, the “Going Forward” logo,  
and other trademarks are trademarks of Sprint Nextel.  
Printed in Korea.  
Welcome to Sprint  
Sprint is committed to bringing you the best wireless  
technology available. We built our complete, nationwide  
network from the ground up, so all your services – whether  
it’s Voicemail, Caller ID, email, or Sprint PCS® Picture Mail –  
will work the same wherever you go on the Nationwide  
Sprint PCS® Network.  
This guide will familiarize you with our technology and your  
new phone through simple, easy-to-follow instructions. It’s  
all right here – from setting up your account passwords and  
voicemail to using the most advanced features of your phone.  
Welcome and thank you for choosing Sprint.  
i
 
Introduction  
This Phone Guide introduces you to Sprint PCS Service and all  
the features of your new phone. It’s divided into four  
sections:  
Section 1: Getting Started  
Section 2: Your Phone  
Section 3: Sprint PCS Service Features  
Section 4: Safety and Warranty Information  
Throughout this guide, you'll find tips that highlight special  
shortcuts and timely reminders to help you make the most of  
your new phone and service. The Table of Contents and Index  
will also help you quickly locate specific information.  
You'll get the most out of your phone if you read each section.  
However, if you'd like to get right to a specific feature, simply  
locate that section in the Table of Contents and go directly to  
that page. Follow the instructions in that section, and you'll  
be ready to use your phone in no time.  
Due to updates in phone software, this printed guide  
may not be the most current version for your phone.  
Visit www.sprint.com and sign on to My PCS to access  
the most recent version of the phone guide.  
Phone  
Guide  
Note:  
Please refer to the Important Safety Information section  
on page 225 to learn about information that will help  
you safely use your phone. Failure to read and follow the  
Important Safety Information in this phone guide may  
result in serious bodily injury, death, or property  
damage.  
WARNING  
ii  
 
Your Phone’s Menu  
The following list outlines your phone’s menu structure. For  
more information about navigating through the menus,  
CONTACTS (RIGHT SOFTKEY)  
PRESS MENU TO DISPLAY THE FOLLOWING:  
VOICE KIT  
1: Voice Service  
1: Digit Dialing  
4: Sound  
2: Sensitivity  
5: Voice Launch  
3: Choice Lists  
6: About  
2: Voice Memo  
1: Record  
2: Review  
MESSAGING  
1: Send Message  
1: Text Message  
4: VoiceSMS  
2: Picture Mail  
2: Outbox  
3: Handwr. Msg  
3: Drafts  
2: Text Message  
1: Inbox  
4: Send Text  
3: Picture Mail  
1: Inbox  
2: Send Picture  
3: Send Handwr. Msg  
4: VoiceSMS  
5: IM & Email  
1: PCS Mail  
4: Yahoo!  
2: AOL  
5: Earthlink  
3: MSN  
6: Other  
iii  
   
6: Voicemail  
1: Call Voicemail  
2: Clear Envelope  
7: Chat & Dating  
8: Settings  
1: Notification  
1: Message and Icon  
2: Icon only  
2: Sending Options  
1: Priority (Normal/Urgent)  
3: Preset Messages  
2: Call Back #  
1: Can’t talk right now. Send me a message.  
2: Call me  
3: Where are you?  
6: Let’s get lunch.  
8: I’ll be there at  
10: I love you!  
13: [Empty]  
4: Can you pick up  
7: The meeting has been cancelled.  
9: What time does it start?  
11: [Empty]  
14: [Empty]  
17: [Empty]  
20: [Empty]  
5: Meet me at  
12: [Empty]  
15: [Empty]  
18: [Empty]  
16: [Empty]  
19: [Empty]  
4: Edit Signature (On/Off)  
5: Message Alerts  
1: Alert Volume  
1: Voicemail  
2: Alert Type  
1: Voicemail  
3: Reminder  
1: Off  
2: Text Message  
2: Text Message  
2: Once  
3: Picture Mail  
3: Picture Mail  
3: Every 2 min  
6: Save in Outbox (Yes/No)  
7: Auto Erase (Yes/No)  
8: VoiceSMS Options  
1: Speakerphone (On/Off)  
2: From Name  
TOOLS  
1: Bluetooth  
iv  
2: Today  
3: Scheduler  
4: Task List  
5: Countdown  
6: Memo Pad  
7: World Time  
1: Options (DST Setting)  
8: Alarm Clock  
1: Alarm #1  
2: Alarm #2  
3: Alarm #3  
9: Calculator  
0: Set Time (displayed when there is no time information)  
PICTURES  
1: Camera  
Press the right softkey while in camera mode to view the following  
options:  
1: Self Timer  
1: Off  
2: 5 Sec  
3: 10 Sec  
2: Fun Tools  
1: Fun Frames  
1: Off  
2: Love Letter  
3: Merry Christmas  
4: Movie Star  
7: Memories  
10: Love  
5: Top Secret  
8: Robinhood  
11: Stars  
6: Dollar  
9: Roses for Love  
12: Beans  
2: Color Tones  
1: Auto  
4: Warm  
2: Sepia  
5: Cool  
3: Mono  
3: Controls  
1: Brightness  
2: White Balance  
v
1: Auto  
4: Tungsten  
2: Sunny  
5: Fluorescent  
3: Cloudy  
6: Manual  
4: Settings  
1: Resolution  
1: High: 640x480  
2: Quality  
2: Med: 320x240  
2: Normal  
3: Low: 224x168  
3: Economy  
3: Off  
1: Fine  
3: Shutter Sound  
1: Shutter 1-6  
2: Say Cheese  
4: Auto Erase (On/Off)  
5: View Mode (Full Screen/Wide Screen)  
5: Review Pictures  
2: My Pictures  
1: In Camera  
3: Online Albums  
1: View Albums  
2: Saved to Phone  
2: Upload Picture  
4: Order Prints  
5: Settings and Info  
1: Account Info  
2: View Mode (Full Screen/Wide Screen)  
CALL HISTORY  
1: Outgoing Calls  
2: Incoming Calls  
3: Missed Calls  
4: Recent Calls  
WEB  
SETTINGS  
1: Display  
1: Screen Saver  
vi  
1: Preset Image  
1: Red Flower  
4: Pattern  
7: Video  
2: Reflection  
5: Skyscraper  
8: Launch Pad  
11: Dual Clock  
3: Sandglass  
6: Sprint  
9: World Time  
12: Analog Clock  
10: Calendar  
2: My Content  
3: My Albums  
2: Menu Style  
1: Grid style 1  
3: Incoming Call  
1: With Caller ID  
2: Grid style 2  
3: List style  
1: Preset Animation  
2: My Content  
3: My Albums  
2: No Caller ID  
1: Preset Animation  
2: My Content  
3: My Albums  
4: Dialing Font  
1: Color  
1: Basic  
2: Rainbow  
3: Monochrome  
4: Hyphenate  
2: Size  
1: Large  
2: Medium  
3: Small  
5: Greeting (Sprint/Custom)  
6: Backlight  
1: Main Display  
1: Flip open  
4: 8 seconds  
2: 30 seconds  
3: 15 seconds  
2: Keypad  
vii  
1: Flip open  
4: 8 seconds  
2: 30 seconds  
5: Off  
3: 15 seconds  
3: Pwr Save Mode (On/Off)  
4: Brightness  
1: Lowest  
4: High  
2: Low  
5: Highest  
3: Med  
2: Sounds  
1: Ringer Type  
1: Voice Calls  
1: With Caller ID  
1: Single Tones  
4: My Contents  
2: Ring Tones  
3: Melodies  
3: Melodies  
2: No Caller ID  
1: Single Tones  
4: My Contents  
2: Ring Tones  
2: Ready Link  
1: Default  
2: Sound 1-6  
3: Messages  
1: Voicemail  
4: Schedule  
2: Text Message  
2: Ring Tones  
3: Picture Mail  
3: Melodies  
1: Single Tones  
4: My Contents  
5: Roam Ringer (Normal/Distinctive)  
2: Volume  
1: Ringer  
1: Ringer Off  
2: 1-Beep  
3: Level 1 - 8  
4: Always Vibrate  
2: Speakerphone (Level 1-8)  
3: Text Message  
1: Use Ringer Vol.  
2: Separate Vol.  
3: Always Vibrate  
viii  
4: Picture Mail  
1: Use Ringer Vol.  
5: Voicemail  
2: Separate Vol.  
2: Separate Vol.  
2: Separate Vol.  
3: Always Vibrate  
3: Always Vibrate  
3: Always Vibrate  
1: Use Ringer Vol.  
6: Alarms  
1: Use Ringer Vol.  
7: App. Volume  
1: Volume  
1: Use Ringer Vol.  
2: Game Vibrate (On/Off)  
8: Ready Link  
1: Use Ringer Vol.  
2: Separate Vol.  
2: Separate Vol.  
3: Always Vibrate  
3: Alerts  
1: Minute Beep (On/Off)  
2: Service (On/Off)  
3: Connect (On/Off)  
4: Sig. Fade Tone (On/Off) 5: Power On/Off (On/Off)  
4: Key Tone  
1: Tone Type  
1: DTMF  
2: Xylophone  
2: Level 1 - 8  
3: Simple  
2: Tone Level  
1: Keytone off  
3: Tone Length (Short/Long)  
5: TTS  
1: TTS Mode (Enable/Disable)  
2: TTS Volume (Silence All/Level 1-8)  
3: Bluetooth  
1: Enable (On/Off)  
2: Visibility  
1: Always visible  
3: Device name  
2: Visible for 3min  
3: Hidden  
4: Device Info  
ix  
4: PCS Vision  
1: Enable Vision  
5: Ready Link  
2: Net Guard (On/Off)  
3: Update Profile  
1: Enable/Disable (Enable/Disable)  
2: Restart Ready Link (Yes/No)  
3: List Update  
4: R-Link Guard (On/Off)  
5: Sounds  
1: Tones (Default/Sound 1-6) 2: Notifications (Off/Once/Repeat)  
3: Missed Call Alert (Off/Once/Repeat/Continuous)  
6: Speakerphone (On/Off)  
7: Default View (Personal List/Personal Groups)  
8: Help  
4: Help  
6: Wireless Backup  
1: Subscribe  
2: Alert (On/Off)  
3: Learn More  
7: Voice Service  
1: Digit Dialing  
1: Adapt Digits  
2: Sensitivity  
1: Commands  
2: Reset Digits  
2: Names  
3: Choice LIsts  
1: Name Dialing  
4: Sound  
2: Digit Dialing  
2: Digits  
3: Contacts  
3: Names  
1: Prompts  
4: Name Settings  
5: Voice Launch  
x
1:Talk Key  
2: Talk Key and Flip Open  
6: About  
8: Security  
1: Lock Phone  
1: Unlocked  
2: On power-up  
3: Lock now  
2: Lock Service  
1: Voice (Lock/Unlock) 2: PCS Vision (Lock/Unlock)  
3: Camera (Lock/Unlock) 4: Ready Link (Lock/Unlock)  
3: Change Lock  
4: Special #  
1: Empty  
2: Empty  
3: Empty  
5: Erase  
1: Erase Contacts (Yes/No)  
3: Erase Voice Memo (Yes/No)  
5: Erase Messages (Yes/No)  
2: Erase My Contents (Yes/No)  
4: Erase Pictures (Yes/No)  
6: Default Settings (Yes/No)  
7: Reset Phone (Yes/No)  
8: Reset Picture Account (Yes/No)  
9: Roaming  
1: Set Mode  
1: Automatic  
2: Call Guard (On/Off)  
3: Data Roaming (On/Off)  
0: Launch Pad  
2: Roaming only  
3: Sprint  
1: Up Key  
1: Contacts  
2: Messaging  
3: Text Inbox  
4: VoiceSMS Inbox  
7: My Content  
10: Voice Memo  
13: Calculator  
16: Missed Alerts  
5: Send Message  
8: Web  
11: Scheduler  
14: Display  
6: Send VoiceSMS  
9: Voice Service  
12: Alarms  
15: Ringer Type  
xi  
2: Down Key  
1: Contacts  
2: Messaging  
5: Send Message  
8: Web  
11: Scheduler  
14: Display  
3: Text Inbox  
4: VoiceSMS Inbox  
7: My Content  
10: Voice Memo  
13: Calculator  
16: Missed Alerts  
6: Send VoiceSMS  
9: Voice Service  
12: Alarms  
15: Ringer Type  
3: Left Key  
1: Contacts  
2: Messaging  
5: Send Message  
8: Web  
11: Scheduler  
14: Display  
3: Text Inbox  
4: VoiceSMS Inbox  
7: My Content  
10: Voice Memo  
13: Calculator  
16: Missed Alerts  
6: Send VoiceSMS  
9: Voice Service  
12: Alarms  
15: Ringer Type  
4: Right Key  
1: Contacts  
2: Messaging  
5: Send Message  
8: Web  
11: Scheduler  
14: Display  
3: Text Inbox  
4: VoiceSMS Inbox  
7: My Content  
10: Voice Memo  
13: Calculator  
16: Missed Alerts  
6: Send VoiceSMS  
9: Voice Service  
12: Alarms  
15: Ringer Type  
*: Others  
1: Call Setup  
1: Abbrev. Dial (On/Off)  
2: Contact Match (On/Off)  
3: Restriction  
1: Outgoing Call (Allow all / Contacts only / Special# only)  
4: Call Answer  
1: Any key  
2: Talk key  
3: Flip open  
5: Auto Answer (CarKit/Headset) (Yes/No)  
2: Language  
1: English  
2: Español  
3: Airplane Mode (On/Off)  
4: Location (On/Off)  
xii  
5: Key Guard (On/Off)  
6: Audio Routing  
1: Normal  
2: Headset Only  
2: Ready Link  
2: TTY + Hear  
7: Headset Mode  
1: Voice Call  
3: Button Off  
3: TTY + Talk  
8: TTY Mode  
1: TTY off  
4: TTY Full  
9: Update Phone SW  
#: Phone Info  
1: Phone Number  
3: Version  
2: Icon Glossary  
4: Advanced  
MY CONTENT  
1: Games  
1: Get New Games  
3: Midnight Pool  
5: Tetris Demo  
2: My Content Manager Games  
4: Ms. PAC-MAN DEMO  
6: World Poker Tour Demo  
7: ZUMA Demo  
2: Ringers  
1: Get New Ringers  
3: Ringers Preview  
2: My Content Manager Ringers  
3: Screen Savers  
1: Get New Screen Saver  
3: Screen Saver Preview  
2: My Content Manager Screen Saver  
4: Applications  
1: Get New Applications  
3: eBay Trial  
2: My Content Manager Applications  
4: ToneMaker  
5: Weatherbug Free Trial  
6: Instant Msg.  
5: Messaging  
1: Get New Messaging  
2: My Content Manager Messaging  
CONTACTS  
1: Find  
xiii  
2: Add New Entry  
3: Speed Dial #s  
4: Group  
1:Unassigned  
3: Friends  
5: VIPs  
2: Family  
4: Colleague  
6: Empty  
5: My Name Card  
6: Wireless Backup  
1: Subscribe  
2: Alert (On/Off)  
3: Learn More  
7: Services  
1: Account Info  
2: Customer Service  
3: Dir Assist  
4: Sprint Operator  
5: Sprint Voice Command  
IN USE MENU  
Press Options (right softkey) to display the following options:  
1: Key Mute  
4: 3-Way Call  
7: Tools  
2: Call History  
5: Messaging  
8: Phone Info  
3: Contacts  
6: Voice Memo  
xiv  
Section 1  
Getting Started  
 
2
Section 1A  
Setting Up Service  
In This Section  
Setting up service on your new phone is quick and easy. This  
section walks you through the necessary steps to unlock your  
phone, set up your voicemail, establish passwords, and  
contact Sprint for assistance with your Sprint PCS Service.  
3
     
Getting Started With Sprint PCS Service  
Determining if Your Phone is Already Activated  
If you purchased your phone at a Sprint Store, it is probably  
activated, unlocked, and ready to use. If you received your  
phone in the mail, it probably has been activated; all you  
need to do is unlock it.  
If your phone is not activated, please refer to the activation  
card included with your phone.  
Unlocking Your Phone  
To unlock your phone, follow these easy steps:  
1. Press  
to turn the phone on.  
).  
2. Press Unlock (  
To select a softkey, press the softkey button directly below the  
softkey text that appears at the bottom left and bottom right  
of your phone’s display screen. Softkey actions change  
according to the screen you’re viewing and will not appear if  
there is no corresponding action available.  
Note:  
3. Enter your four-digit lock code. (For security purposes,  
the code is not visible as you type.)  
If you can’t recall your lock code, try using the last four digits  
of either your Social Security number or wireless phone  
number or try 0000 or NATL (6285). If none of these work, call  
Sprint Customer Service at 1-888-211-4PCS (4727).  
Tip:  
4
 
Setting Up Your Voicemail  
All unanswered calls to your phone are automatically  
transferred to your voicemail, even if your phone is in use or  
turned off. Therefore, you will want to set up your voicemail  
and personal greeting as soon as your phone is activated.  
To set up your voicemail:  
1. From standby mode, press and hold  
.
2. Follow the system prompts to:  
Create your passcode  
Record your name announcement  
Record your greeting  
Choose whether or not to activate One-Touch  
Message Access (a feature that lets you access  
messages simply by pressing and holding  
,
bypassing the need for you to enter your passcode)  
Voicemail Passcode  
Note:  
If you are concerned about unauthorized access to your  
voicemail account, Sprint recommends you enable your  
voicemail passcode.  
For more information about using your voicemail, see “Using  
5
   
Sprint PCS Account Passwords  
As a Sprint PCS customer, you enjoy unlimited access to your  
personal account information, your voicemail account, and  
your Sprint PCS Vision® account. To ensure that no one else  
has access to your information, you will need to create  
passwords to protect your privacy.  
Account Password  
If you are the account owner, you'll have an account password  
to sign on to www.sprint.com and to use when calling Sprint  
Customer Service. Your default account password is the last  
four digits of your Social Security number. If you are not the  
account owner (if someone else receives the invoice for your  
Sprint PCS Service), you can get a sub-account password at  
Voicemail Password  
You'll create your voicemail password (or passcode) when you  
page 178 for more information on your voicemail password.  
Sprint PCS Vision Password  
With your A640 by Samsung, you may elect to set up a  
Sprint PCS Vision password. This optional password may be  
used to authorize purchase of Premium Services content and  
to protect personal information on multi-phone accounts.  
For more information, or to change your passwords, sign on  
to www.sprint.com or call Sprint Customer Service at  
1-888-211-4PCS (4727).  
6
   
Getting Help  
You can go online to:  
Access your account information  
Check your minutes used (depending on your  
Sprint PCS service plan)  
View and pay your bill  
Make your life easier by enrolling in Sprint PCS online  
billing and automatic payment  
Purchase accessories  
Shop for the latest phones  
View available Sprint PCS service plans and options  
Learn more about Sprint PCS Vision and other great  
products like Sprint PCS Picture Mail, games, ringers,  
screen savers, and more  
Reaching Sprint Customer Service  
You can reach Sprint Customer Service many different ways:  
Dial  
on your wireless phone.  
Sign on to your account at www.sprint.com.  
Call us toll-free at 1-888-211-4727 (Consumer customers)  
or 1-888-788-4727 (Business customers).  
Write to us at Sprint Customer Service, P.O. Box 8077,  
London, KY 40742.  
7
   
Receiving Automated Invoicing Information  
For your convenience, your phone gives you access to  
invoicing information on your Sprint PCS account. This  
information includes balance due, payment received,  
invoicing cycle, and an estimate of the number of minutes  
used since your last invoicing cycle.  
To access automated invoicing information:  
Press  
.
This service may not be available in all Affiliate areas.  
Note:  
Sprint 411  
You have access to a variety of services and information  
through Sprint 411, including residential, business, and  
government listings; movie listings or showtimes; driving  
directions, restaurant reservations, and major local event  
information. You can get up to three pieces of information  
per call, and the operator can automatically connect your call  
at no additional charge.  
There is a per-call charge to use Sprint 411 and you will be  
billed for airtime.  
To call Sprint 411:  
Press  
.
8
 
Sprint Operator Services  
Sprint PCS Operator Services provides assistance when  
placing collect calls or when placing calls billed to a local  
telephone calling card or third party.  
To access Sprint Operator Services:  
Press  
.
For more information or to see the latest in products and  
services, visit us online at www.sprint.com.  
9
 
10  
Section 2  
Your Phone  
 
12  
Section 2A  
Your Phone: The Basics  
In This Section  
Your phone is packed with features that simplify your life and  
expand your ability to stay connected to the people and  
information that are important to you. This section will guide  
you through the basic functions and calling features of your  
phone.  
13  
   
Front View of Your Phone  
1. Speaker  
2. Display Screen  
22. Navigation Key  
3. Ready Link Key  
4. Headset Jack  
5. Left Softkey  
21. Right Softkey  
20. Menu/OK Key  
19. END/POWER Key  
18. Speakerphone/  
Voice Signal Key  
6. TALK Key  
7. Volume Key  
17. BACK/CLEAR Key  
16. Camera Key  
8. Voicemail Key  
9. Numeric Keypad  
10. Shift/Asterisk Key  
15. Space/Pound Key  
14. Plus Code  
Dialing Key  
13. Microphone  
12. Power Interface  
Connector  
11. Standard Interface/  
Accessory Connector  
14  
   
Key Functions  
1. Speaker allows you to hear the other caller and the  
different ring tones or sounds offered by your phone.  
2. Display Screen displays all the information needed to  
operate your phone, such as the call status, the  
contacts, the date and time, and the signal and battery  
strength.  
3. Ready Link Key press to activate Ready Link mode.  
4. Headset Jack allows you to plug in an optional headset  
for convenient, hands-free conversations.  
5. Left Softkey allows you to select softkey actions or menu  
items corresponding to the bottom left line on the  
display screen.  
6. Talk Key allows you to place or receive calls, answer Call  
Waiting, use Three-Way Calling, or activate Voice Dial.  
7. Volume Key allows you to adjust the ringer volume in  
standby mode (with the flip open) or adjust the voice  
volume during a call. The volume key can also be used to  
scroll up or down to navigate through the different  
menu options. To mute the ringer during an incoming  
call, press the volume key up or down.  
8. Voicemail Key allows you to press and hold to  
automatically dial your voicemail.  
9. Numeric Keypad allows you to enter numbers, letters,  
and characters.  
10. Shift/Asterisk Key enters the asterisk [*] character for  
calling features. In text entry mode, press to change the  
capitalization mode.  
11. Standard Interface/Accessory Connector allows you to  
connect optional charging accessories and accessory  
cables to your phone.  
15  
 
12. Power Interface Connector allows you to plug in the travel  
charger that was included with your phone.  
13. Microphone allows other callers to hear you clearly  
when you are speaking to them.  
14. Plus Code Dialing Key automatically dials the  
international access code for the country in which you  
are located (for instance, 011 for international calls  
placed from the United States).  
15. Space/Pound Key enters the pound [#] character for  
calling features. In text entry mode, press to enter a  
space.  
16. Camera Key allows you to capture a picture when you  
are in camera mode.  
17. Back/Clear Key deletes characters from the display in  
text entry mode. When in a menu, press the Back key to  
return to the previous menu. This key also allows you to  
return to the previous screen in a Sprint PCS Vision  
session.  
18. Speakerphone/Voice Signal Key in stand-by mode, press  
and hold to launch voice signal. Press once to display  
the recent call log. If the flip is closed, press and hold  
with the Ready Link key to disable/enable the key guard.  
While on a call, press to turn speakerphone on or off.  
19. End Key/Power ends a call. Press and hold this key for  
two seconds to turn your phone on or off. While in the  
main menu, it returns the phone to standby mode and  
cancels your input. When you receive an incoming call,  
press to enter silent mode and mute the ringer.  
20. Menu/OK allows you to access the menu screen. It also  
allows you to accept choices when navigating through a  
menu.  
16  
21. Right Softkey allows you to select softkey actions or  
menu items corresponding to the bottom right line on  
the display screen.  
22. Navigation Key scrolls through the phone’s menu  
options and acts as a shortcut key from standby mode.  
Press Up to access Missed Alerts.  
Press Down to access My Content.  
Press Right to access the Web.  
Press Left to access Send Message.  
(Keys can be reassigned to create customized  
shortcuts.)  
Viewing the Display Screen  
Your phone’s display screen provides a wealth of information  
about your phone’s status and options. This list identifies the  
symbols you’ll see on your phone’s display screen:  
To view a list of your phone’s icons and descriptions, from the  
main menu select Settings > Phone Info > Icon Glossary.  
Tip:  
indicates that your Sprint PCS Vision connection  
is active.  
indicates that you are sending information.  
indicates that you are receiving information.  
indicates that your Sprint PCS Vision connection  
is dormant or inactive.  
indicates Ready Link is being used.  
indicates Ready Link is disabled.  
indicates Ready Link/Speaker On is enabled.  
17  
   
indicates that position location is active.  
indicates that position location is inactive.  
indicates that your phone is in Web security  
mode.  
indicates that your phone is roaming.  
indicates that you have voicemail, text, numeric  
pages, or Wireless Application Protocol (WAP)  
messages waiting. Press  
briefly to see a list of  
pending messages or press and hold to dial your  
voicemail box.  
indicates that there is an unread message in  
your inbox.  
indicates that the text message has been read.  
indicates that there is an unread urgent message in  
your inbox.  
indicates that you have read the urgent message.  
indicates that there is an unread URL message.  
indicates that you have read the URL message.  
indicates that there is an unread urgent URL  
message.  
indicates that you have read the urgent URL  
message.  
indicates that the message was sent.  
indicates that the message failed to be sent.  
indicates that you have a pending message.  
18  
indicates that the message is a draft.  
indicates that there is an unread Text VoiceSMS  
message in your inbox.  
indicates that the Text VoiceSMS message has been  
read.  
indicates that there is a new SMS Voice message in  
your inbox.  
indicates that you have listened to the SMS Voice  
message.  
indicates that your message is locked.  
indicates that your phone is in vibrate all mode.  
indicates that the TTY option is on.  
indicates that your phone has a ringer volume set  
and the vibrate option is checked.  
indicates that the ringer is set at a level  
between 1 - 8 or that 1-Beep is selected.  
indicates that your ringer is turned off and the  
vibrate option is checked.  
indicates that your phone’s ringer is turned off and  
the vibrate option is not checked.  
indicates that an alarm is set on your phone.  
tells you a call is in progress.  
means your phone cannot find a signal.  
displays your current signal strength. The more  
lines you have, the stronger your signal.  
19  
shows your current battery charge strength. (Icon  
shows fully charged in idle mode.)  
shows your current battery charge strength. (Icon  
shows fully discharged in idle mode.)  
indicates that the camera is enabled.  
indicates that the self-timer function is enabled.  
With the self-timer enabled, a set amount of time  
is required prior to taking a picture.  
indicates that the brightness has been set  
manually.  
indicates that the white balance setting  
automatically adjusts for the conditions.  
indicates that the white balance has been set to  
Sunny. This is used for taking pictures outdoors on  
bright sunny days.  
indicates that the white balance has been set to  
Cloudy. This is used for taking pictures outdoors  
under cloudy conditions.  
indicates that the white balance has been set to  
Tungsten. This is used for taking pictures indoors  
under normal lighting conditions.  
indicates that the white balance has been set to  
Fluorescent. This is used for taking pictures indoors  
under fluorescent lighting conditions.  
indicates that the white balance has been set to  
Manual. This is used for taking pictures indoors.  
20  
indicates that a picture has been assigned a  
function. An example may be Picture ID, Screen  
Saver, or Incoming Call.  
indicates that a picture has been saved to your  
phone.  
indicates that a picture has been uploaded to an  
online album or folder.  
indicates that a picture has been downloaded to  
from an online album or folder.  
indicates that Bluetooth technology is connected.  
indicates that Bluetooth technology is enabled.  
Display indicators help you manage your roaming charges by  
letting you know when you’re off the Nationwide Sprint PCS  
Network. (For more information, see Section 2D: Controlling  
Your Roaming Experience, on page 79.)  
Note:  
Features of Your Phone  
Congratulations on the purchase of your phone. The A640 by  
Samsung is lightweight, easy-to-use, and reliable, and it also  
offers many significant features and service options. The  
following list previews some of those features and provides  
page numbers where you can find out more:  
Dual band/tri-mode capability allows you to make and  
receive calls while on the Nationwide Sprint PCS Network  
and to roam on other analog and 1900 and 800 MHz  
digital networks where Sprint has implemented roaming  
21  
 
Sprint PCS Ready Link® provides instant walkie-talkie–  
style communication between two or more Ready Link  
users (up to six on a group call) (page 143).  
Sprint PCS Vision provides access to the wireless Internet  
Sprint PCS® Mail (page 204), SMS Text Messaging (page  
186), and SMS Voice Messaging (page 189) provide quick  
and convenient messaging capabilities.  
Sprint PCS® Voice Command lets you dial phone numbers  
by speaking someone’s name or the digits of that person’s  
Games, ringers, screen savers, and other applications can  
be downloaded to make your phone as unique as you are  
(page 206). Additional charges may apply.  
The Contacts list allows you to store up to 299 entries,  
with up to five phone numbers per entry (page 91).  
The built-in Scheduler offers several personal information  
management features to help you manage your busy  
Your phone is equipped with a Location feature for use in  
connection with location-based services that may be  
available in the future (page 57).  
Your phone’s external LCD display allows you to monitor  
the phone’s status and to see who’s calling without  
opening the phone.  
T9 Text Input lets you quickly type messages with one  
Speed dial lets you dial phone numbers with one or two  
keypresses (page 41).  
22  
Turning Your Phone On and Off  
Turning Your Phone On  
To turn your phone on:  
Press and release  
.
Once your phone is on, it may display “Looking for Service,”  
which indicates that your phone is searching for a signal.  
When your phone finds a signal, it automatically enters  
standby mode – the phone’s idle state. At this point, you are  
ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of  
searching, a Power Save feature is automatically activated.  
When a signal is found, your phone automatically returns to  
standby mode.  
In Power Save mode, your phone searches for a signal  
periodically without your intervention. You can also initiate a  
search for Sprint PCS Service by pressing any key (when your  
phone is turned on).  
The Power Save feature helps to conserve your battery power  
when you are in an area where there is no signal.  
Note:  
Turning Your Phone Off  
To turn your phone off:  
Press and hold  
for two seconds until you see the  
powering-down animation on the display screen.  
Your screen remains blank while your phone is off (unless the  
battery is charging).  
23  
   
Using Your Phone’s Battery and Charger  
Use only Sprint-approved or manufacturer-approved  
batteries and chargers with your phone. The failure to use  
a Sprint-approved or manufacturer-approved battery and  
charger may increase the risk that your phone will  
overheat, catch fire, or explode, resulting in serious bodily  
injury, death, or property damage.  
Warning!  
Sprint- or manufacturer-approved batteries and accessories  
can be found at Sprint Stores or through your phone’s  
manufacturer, or call 1-866-343-1114 to order. They’re also  
available at www.sprint.com – click the Wireless link under  
“Personal,” and then click Accessories under “Shop Sprint PCS  
Online.”  
24  
   
Battery Capacity  
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It  
allows you to recharge your battery before it is fully drained.  
The battery provides up to 3.8 hours of continuous digital talk  
time.  
When the battery reaches 5% of its capacity, the battery icon  
blinks. When there are approximately two minutes of talk  
time left, the phone sounds an audible alert and then powers  
down.  
Long backlight settings, searching for service, vibrate mode,  
and browser use affect the battery’s talk and standby times.  
Note:  
Tip:  
Be sure to watch your phone’s battery level indicator and  
charge the battery before it runs out of power.  
Installing the Battery  
To install the Li-Ion battery:  
1. Insert the battery into the opening on the back of the  
phone at a 45-degree angle, making sure to line up the  
gold contacts. Gently press down until it snaps into  
place.  
2. Install the protective cover by lining up the tabs at a  
and gently press up until the cover snaps into place.  
25  
   
Removing the Battery  
To remove your battery:  
1. Remove the protective cover by pressing down on the  
back of the cover and sliding it towards the back of the  
handset.  
2. Grip the battery at the bottom and pull up and out at a  
45-degree angle.  
Charging the Battery  
Your phone’s Li-Ion battery is rechargeable and should be  
charged as soon as possible so you can begin using your  
phone.  
Keeping track of your battery’s charge is important. If your  
battery level becomes too low, your phone automatically  
turns off and you will lose all the information you were just  
working on. For a quick check of your phone’s battery level,  
glance at the battery charge indicator located in the upper-  
right corner of your phone’s display screen. If the battery  
charge is getting too low, the battery icon (  
the phone sounds a warning tone.  
) blinks and  
Always use a Sprint-approved desktop charger, travel charger,  
or vehicle power adapter to charge your battery.  
Using the wrong battery charger could cause damage  
to your phone and void the warranty.  
Warning:  
26  
 
Using the Travel Charger  
To use the travel charger provided with your phone:  
Plug the round end of the AC adapter into the phone’s  
power interface connector and the other end into an  
electrical outlet.  
A charging icon located in the top right corner of the  
outside LCD lets you know the battery is charging.  
An onscreen indicator lets you know that the battery  
is charged.  
It takes about three hours to fully recharge a completely  
rundown battery.  
UL Certified Travel Adapter  
The Travel Adapter for this phone has met UL 1310 safety  
requirements. Please adhere to the following safety  
instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY  
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE  
PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION  
TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG  
ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER  
OUTLET.  
27  
 
Navigating Through Phone Menus  
The navigation key on your phone allows you to scroll  
through menus quickly and easily. The scroll bar at the right  
of the menu keeps track of your position in the menu at all  
times.  
To navigate through a menu, simply press the navigation key  
up or down. If you are in a first-level menu, such as Settings,  
you may also navigate to the next or previous first-level menu  
by pressing the navigation key right or left.  
For a diagram of your phone’s menu, please see “Your Phone’s  
Selecting Menu Items  
As you navigate through the menu, menu options are  
highlighted. Select any numbered option by simply pressing  
the corresponding number on the phone’s keypad. You may  
also select any item by highlighting it and pressing  
For example, if you want to view your last incoming call:  
1. Select Menu ( ) to access the main menu.  
2. Select Call History by pressing  
and pressing  
3. Select Incoming Calls by pressing  
it and pressing  
.
or by highlighting it  
or by highlighting  
.
. (If you have received any calls, they  
are displayed on the screen.)  
For the purposes of this guide, the above steps condense into  
“Select Menu > Call History > Incoming Calls.”  
Note:  
28  
   
Backing Up Within a Menu  
To go to the previous menu:  
Press  
To return to standby mode:  
Press  
.
.
Displaying Your Phone Number  
Just in case you forget your phone number, your phone can  
remind you.  
To display your phone number:  
Select Menu > Settings > Phone Info > Phone Number.  
(Your phone number and other information about your  
phone and account will be displayed.)  
To select Menu, press the menu key. To select menu options  
(such as Settings, above), highlight the option and press OK.  
(If the menu options are numbered, you may also select an  
option simply by pressing the corresponding number key.)  
Note:  
29  
   
Making and Answering Calls  
Holding Your Phone  
Since the antenna has been integrated into the design of the  
phone, it is important not to block the reception path  
accidentally to ensure the strongest signal possible is  
achieved. The orbital internal antenna is located near the  
hinge of your handset.  
ATTENTION  
Incorrect  
Correct  
Obstructing the internal  
antenna could inhibit  
call performance.  
30  
 
Making Calls  
Placing a call from your phone is as easy as making a call from  
any landline phone. Just enter the number, press  
you’re on your way to clear calls.  
, and  
To make a call using your keypad:  
1. Make sure your phone is on.  
2. Enter a phone number from standby mode. (If you make  
a mistake while dialing, press  
a time. Press and hold  
to erase one digit at  
to erase the entire number.)  
3. Press  
Call Guard is enabled, press  
4. Press or close the phone when you are finished.  
. (To make a call when you are roaming and  
and then . See  
To redial your previous call, press TALK twice.  
Tip:  
You can also place calls from your phone by using the  
Contacts menu (page 93), Sprint PCS Voice Command  
(page 217), speed dialing numbers from your  
Contacts (page 40), using Voice Dial (page 115), and using  
your Call History listings (page 88).  
31  
 
Dialing Options  
When you enter numbers in standby mode, select  
Options (  
) to see the following dialing options.  
To initiate an option, press the corresponding softkey button.  
4-Digit Dial dials the four digits displayed onscreen.  
Dial dials the number or digits displayed.  
Send Msg allows you to send text messages, picture  
messages, SMS Voice messages, or handwritten  
messages, with attachments to the number being dialed.  
Save allows you to enter a seven- or ten-digit number  
(phone number and area code) and press Options (right  
softkey) > Save to save the phone number in your  
Find allows you to enter a digit or string of digits, press  
Options (right softkey), and then press Search to display  
Contacts entries that contain the entered numbers. (See  
Hard Pause allows you to enter a hard pause. To continue  
dialing, you must press a key. (See “Dialing and Saving  
2sec Pause allows you to enter a two-second pause. The  
phone will pause and then continue dialing without any  
additional keys being pressed. (See “Dialing and Saving  
32  
 
Answering Calls  
To answer an incoming call:  
1. Make sure your phone is on. (If your phone is off,  
incoming calls go to voicemail.)  
2. Press  
to answer an incoming call. (Depending on  
your phone’s settings, you may also answer incoming  
calls by opening the phone or by pressing any number  
information.)  
Your phone notifies you of incoming calls in the following  
ways:  
The phone rings and/or vibrates.  
The backlight illuminates.  
The screen displays an incoming call message.  
If the incoming call is from a number stored in your Contacts,  
the entry’s name is displayed. The caller’s phone number may  
also be displayed, if available.  
If Call Answer is set to Talk Key, the following options are also  
displayed. To select an option, press the corresponding  
softkey button.  
Answer to answer the call.  
Ignore to send the call to your voicemail box.  
To quiet the ringer, press the back, end, or volume key.  
Tip:  
33  
 
Answering a Roam Call With Call Guard Enabled  
Call Guard is an option that helps you manage your roaming  
charges when making or receiving calls while outside the  
Nationwide Sprint PCS Network. Please see Section 2D:  
Controlling Your Roaming Experience for more information  
about roaming.  
To answer a call when you are roaming and Call Guard is enabled:  
Guard” on page 82 for additional information.)  
When your phone is off, incoming calls go directly to  
voicemail.  
Note:  
Ending a Call  
To disconnect a call when you are finished:  
Close the phone or press  
.
Missed Call Notification  
When an incoming call is not answered, the Missed Call log is  
displayed on your screen.  
To display the Missed Call entry from the notification screen:  
Highlight the entry and press  
number, press .)  
. (To dial the phone  
To display a Missed Call entry from standby mode:  
1. Select Menu > Call History > Missed Calls.  
2. Highlight the entry you wish to view and press  
.
34  
Calling Emergency Numbers  
You can place calls to 911 (dial  
and press  
),  
even if your phone is locked or your account is restricted.  
When you place an emergency call, your phone automatically  
enters Emergency mode.  
Note:  
During an emergency call, press Options (right softkey) to  
display your options. To select an option, highlight it and  
press  
.
Unlock Phone to unlock your phone (appears only if the  
phone is locked).  
To close the pop-up menu (appears only if the phone is  
unlocked), press the  
key.  
Press Options (right softkey) and then Phone Info & Phone  
Number to display your phone number during an emergency  
call.  
Tip:  
To exit Emergency mode:  
1. Press  
to end a 911 call.  
2. Press  
until Emergency mode is exited.  
35  
In-Call Options  
Pressing Options (right softkey) during a call displays a list of  
features you may use during the course of a call. To select an  
option, press the corresponding keypad number or highlight  
the option and press  
. The following options are available  
through the Options menu:  
Due to higher volume levels, do not place the phone  
near your ear during monitor use.  
Warning!  
Key Mute/Unmute allows you to mute the microphone on  
your handset so the caller is unable to hear any sound.  
Call History checks your call log for Outgoing, Incoming,  
Missed, and Recent calls. You can also erase the logs from  
this menu.  
Contacts accesses the Contacts menu.  
3-Way Call allows you to talk to two different people at the  
same time. (For more information, see “Making a Three-  
Messaging accesses the Messaging menu options.  
Voice Memo allows you to record incoming audio from  
your conversation. (For more information, see “Voice  
Tools accesses the Tools menu options.  
Phone Info displays the following menu options:  
Phone Number  
Icon Glossary  
Version  
Advanced  
During a call, the left softkey button functions as the Mute  
button. Press it to mute the phone’s microphone for privacy.  
Press it again to Unmute the phone.  
36  
End-of-Call Options  
After receiving a call from or making a call to a phone number  
that is not in your Contacts, the phone number and the  
duration of the call are displayed. The right softkey displays  
the Next > Save option. Select this option if you wish to add  
the new number to your Contacts. (See “Saving a Phone  
Number” below.)  
After receiving a call from or making a call to a phone number  
that is already in your Contacts, the entry name and phone  
number and the duration of the call are displayed. Highlight  
the desired entry and press the Right Softkey to display the  
option Next > Call Again.  
The End-of-Call options are not displayed for calls identified  
as No ID or Restricted.  
Note:  
Saving a Phone Number  
Your phone can store up to five phone numbers in each  
Contacts entry for up to a total of 299 phone numbers. Each  
entry’s name can contain up to 20 characters. Your phone  
automatically sorts the Contacts entries alphabetically. (For  
more information, see Section 2F: Using Contacts on page  
To save a number from standby mode:  
1. Enter a phone number and press  
.
2. Select New Entry or Existing Entry and press  
.
The New Entry screen does not display for the first entry saved  
in the Contacts. Skip to step 3 if you are entering the first  
number in the Contacts.  
Note:  
37  
 
If Existing Entry was selected, press OK to launch the Find  
screen. Locate the desired contact and add the additional  
number to the selected entry.  
Note:  
3. Use your navigation key to select a label (Mobile, Home,  
Work, Pager, or Others) and press  
4. Enter a name for the entry using the numeric keys. After  
pressing a key for the first letter, press to select the  
.
desired entry method T9(English), Alpha, Symbol, or  
5. When you have finished entering the name, press  
to  
return to the Contacts entry.  
6. Press  
for Done to save the entry.  
Finding a Phone Number  
You can search Contacts entries for phone numbers that  
contain a specific string of numbers.  
To find a phone number:  
1. While in standby mode, enter three or more of the last  
digits of the phone number. (The more numbers you  
enter, the more specific the search becomes.)  
2. Press Options (  
) and select Find. (All Contacts entries  
matching the entered numbers will be displayed.)  
3. To display the Contacts entry that contains the phone  
number you entered, highlight the entry and press  
.
To dial the number, press  
.
38  
   
Dialing and Saving Phone Numbers With Pauses  
You can dial or save phone numbers with pauses for use with  
automated systems, such as voicemail or credit card billing  
numbers.  
There are two types of pauses available on your phone:  
Hard Pause sends the next set of numbers when you press  
the left softkey button.  
2-sec Pause automatically sends the next set of numbers  
after two seconds.  
You can have multiple pauses in a phone number and  
combine two-second and hard pauses.  
Note:  
To dial or save phone numbers with pauses:  
1. Enter the phone number.  
2. Press Options (  
) and select either Hard Pause or 2sec  
Pause.  
3. Enter additional numbers.  
4. Press  
.
– or –  
Press Options (  
) > Save to save the number in your  
Contacts.  
When dialing a number with a hard pause, press Talk to send  
the next set of numbers.  
Note  
39  
   
Plus (+) Code Dialing  
When placing international calls, you can use Plus Code  
Dialing to automatically enter the international access code  
for your location (for example, 011 for international calls  
placed from the United States).  
To make a call using Plus Code Dialing:  
1. Press and hold  
until a “+” appears on your phone  
display.  
2. Dial the country code and phone number you’re calling  
and press . (The access code for international dialing  
will automatically be dialed, followed by the country  
code and phone number.)  
Dialing From the Contacts List  
To dial directly from a Contacts entry:  
1. Select Menu > Contacts > Find.  
Press Contacts (right softkey) to list entries.  
Shortcut:  
2. Highlight the entry you want to call and press  
.
– or –  
To dial another number from the entry, highlight the  
name and press  
call, and press  
, highlight the number you wish to  
.
40  
     
Using Speed Dialing  
You can store up to 98 numbers in your phone’s speed dial  
memory to make contacting friends and family as easy as  
pressing a button or two. With this feature, you can dial  
speed dial entries using one keypress for locations 2-9 or two  
keypresses for locations 10-99.  
To use One-Touch Dialing for speed dial locations 2-9:  
Press and hold the appropriate key for approximately  
two seconds. The display confirms that the number has  
been dialed when it shows the name and number of the  
speed dial.  
To use Two-Touch Dialing for speed dial locations 10-99:  
1. Press the first digit.  
2. Press and hold the second digit for approximately two  
seconds. The display confirms that the number has been  
dialed when it shows the name and number of the  
speed dial.  
Speed dialing is not available when you are roaming; when  
you are roaming off the Nationwide Sprint PCS Network, you  
must always dial using 11 digits (1 + area code + number).  
Note:  
41  
     
Entering Text  
Selecting a Character Input Mode  
Your phone provides convenient ways to enter words, letters,  
punctuation, and numbers whenever you are prompted to  
enter text (for example, when adding a Contacts entry or  
when using Sprint PCS Mail and SMS Text Messaging).  
To change the character input mode:  
1. When you display a screen where you can enter text,  
press the right softkey to change the character input  
mode.  
2. Select one of the following options:  
T9(English) to enter text using a predictive text  
entering system that reduces the number of keys  
that need to be pressed while entering a word  
Alpha to cycle through the alpha characters  
associated with the letters on the keypad  
Symbol to enter symbols (see page 45).  
Number to enter numbers by pressing the numbers  
Preset Msg to enter preprogrammed messages (see  
Recent Msg to enter a message from a list of  
previous messages.  
Emoticons to enter “emoticons” (see page 45).  
When entering text, press the * (Shift) key to change letter  
capitalization (Abc > ABC > abc).  
Tip:  
42  
       
Entering Characters Using T9 Text Input  
T9 Text Input lets you enter text in your phone by pressing  
keys just once per letter. (To select the T9 Word mode when  
entering text, see “Selecting a Character Input Mode” on  
T9 Text Input analyzes the letters you enter using an intuitive  
word database and creates a suitable word. (The word may  
change as you type.)  
To enter a word using T9(English) Text Input:  
1. Select the T9(English) character input mode. (See  
“Selecting a Character Input Mode” on page 42.)  
2. Press the corresponding keys once per letter to enter a  
word. (For example, to enter the word “Bill,” press  
.) (If you make a mistake, press  
to erase a single character. Press and hold  
delete an entire entry.)  
to  
If the word you want is not displayed after you have entered  
all the letters, press to scroll through additional word  
selections. To accept a word and insert a space, press  
.
43  
   
Entering Characters by Tapping the Keypad  
To enter characters by tapping the keypad:  
1. Select the Alpha mode. (See “Selecting a Character Input  
2. Press the corresponding keys repeatedly until the  
desired letter appears. (For example, to enter the word  
“Bill,” press  
times, and  
mistake, press  
and hold  
twice,  
three times,  
three  
three times again.) (If you make a  
to erase a single character. Press  
to delete an entire entry.)  
By default, the first letter of an entry is capitalized and the  
following letters are lowercased. After a character is entered,  
the cursor automatically advances to the next space after two  
seconds or when you enter a character on a different key.  
Characters scroll in the following order:  
. ,@ 1 ?! * # /  
A B C 2  
T U V 8  
W X Y Z 9  
0
D E F 3  
G H I 4  
Space  
Shift  
J K L 5  
M N O 6  
P Q R S 7  
44  
   
Entering Numbers, Symbols, Smileys, and Preset  
Messages  
To enter numbers:  
Select the Number mode and press the appropriate key.  
To enter symbols:  
Input Mode” on page 42.) To enter a symbol, press the  
appropriate key indicated on the display.  
To enter “emoticons” (smileys):  
Select the Emoticons mode and press the  
To enter preset messages:  
2. Scroll to the desired preprogrammed message and  
press  
.
Preset messages make composing text messages even easier  
by allowing you to enter preset messages, such as “Meet me  
at,” “Let’s get lunch,” or a customized preset message of your  
own. (For more information on preset messages, please see  
Note:  
45  
           
46  
Section 2B  
Controlling Your Phone’s Settings  
In This Section  
Call Setup Options  
Using the menu options available on your phone, you can  
customize your phone to sound, look, and operate just the way  
you want it to. This section describes how you can change your  
phone’s settings to best suit your needs. Take a few moments  
to review these options and to adjust or add settings that are  
right for you.  
47  
     
Sound Settings  
Ringer Types  
Ringer types help you identify incoming calls and messages.  
You can assign ringer types to individual Contacts entries,  
types of calls, and types of messages.  
Preprogrammed Ringers include a variety of standard  
ringer types.  
Vibrating Ringer alerts you to calls or messages without  
disturbing others.  
Downloaded Ringers can be downloaded right to your  
Selecting Ringer Types for Voice Calls  
Your phone provides a variety of ringer options that allow you  
to customize your ring and volume settings. These options  
allow you to identify incoming calls by the ring.  
To select a ringer type for voice calls:  
1. Select Menu > Settings > Sounds > Ringer Type >  
Voice Calls.  
2. Select With Caller ID or No Caller ID.  
3. Select Single Tones, Ring Tones, Melodies, or My Contents  
and press  
. (The list of ringers or videos is displayed.)  
4. Use your navigation key to scroll through the available  
ringers. A sample ringer will sound as you highlight  
each option.  
5. Press  
.
48  
     
Selecting Ringer Types for Messages  
To select a ringer type for messages:  
1. Select Menu > Settings > Sounds > Ringer Type >  
Messages.  
2. Select Voicemail, Text Message or Picture Mail.  
3. Select Single Tones, Ring Tones, Melodies, or My Contents  
and press  
. (The list of preprogrammed ringers is  
displayed.)  
4. Use your navigation key to scroll through the available  
ringers. A sample ringer will sound as you highlight  
each option.  
5. Press  
to assign the desired ringer.  
Selecting Ringer Types for Scheduled Events  
To select a ringer type for scheduled events:  
1. Select Menu > Settings > Sounds > Ringer Type > Schedule.  
2. Select Single Tones, Ring Tones, Melodies, or My Contents  
and press  
. (The list of preprogrammed ringers is  
displayed.)  
3. Use your navigation key to scroll through the available  
ringers. A sample ringer will sound as you highlight  
each option.  
4. Press  
to assign the desired ringer.  
49  
Selecting Ringer Types for Roam Ringer  
To select a ringer type for roam ringer:  
1. Select Menu > Settings > Sounds > Ringer Type >  
Roam Ringer.  
2. Select Normal or Distinctive and press  
.
Selecting a Key Tone  
Your phone offers a number of options for selecting the  
audible tones accompanying a keypress. (Longer tone lengths  
may be better for tone recognition when dialing voicemail or  
other automated systems.)  
To select a key tone:  
1. Select Menu > Settings > Sounds > Key Tone.  
2. Select Tone Type and press  
.
3. Select DTMF, Xylophone, or Simple and press  
.
Key Tone Level  
Your phone allows you to set the desired volume level of the  
key tones.  
To set the key tone level:  
1. Select Menu > Settings > Sounds > Key Tone > Tone Level.  
2. Press  
left or right until you hear the desired tone  
level and press  
.
50  
 
Key Tone Length  
The key tone length allows you to choose between short or  
long tones when pressing a key. Longer tone lengths may be  
better for tone recognition when dialing voicemail or other  
automated systems.  
To set the key tone length:  
1. Select Menu > Settings > Sounds > Key Tone >  
Tone Length.  
2. Select Short or Long and press  
.
Adjusting the Phone’s Ringer Volume  
You can adjust your phone’s ringer volume to suit your needs  
and your environment.  
To adjust your phone’s ringer volume:  
1. Select Menu > Settings > Sounds > Volume.  
2. Select Ringer.  
3. Use the navigation key to choose a volume level and  
select Done (  
). (Select Always Vibrate to make the  
ringer vibrate at any volume level.)  
You can adjust the ringer volume in standby mode (or the  
earpiece volume during a call) by using the volume key on the  
left side of your phone.  
Tip:  
51  
 
Adjusting the Phone’s Volume Settings  
You can adjust your phone’s volume settings to suit your  
needs and your environment.  
To adjust your phone’s volume settings:  
1. Select Menu > Settings > Sounds > Volume.  
2. Select Ringer, Speakerphone, Text Message, Picture Mail,  
Voicemail, Alarms, App. Volume, or Ready Link and  
press  
.
3. Select Use Ringer Volume to use the ringer settings, or  
select Separate Volume.  
4. Use the navigation key to choose a volume level and  
select Done (  
). (Select Always Vibrate to make the  
ringer vibrate at any volume level.)  
Alert Notification  
Your phone can alert you with an audible tone when you  
change service areas, once a minute during a voice call, when  
the signal fades, when powering your phone on or off, or  
when a call has been connected.  
To enable or disable alert sounds:  
1. Select Menu > Settings > Sounds > Alerts.  
2. Select Minute Beep, Service, Connect, Sig. Fade Tone, or  
Power On/Off and press  
.
If Power On/Off is selected, choose On or Off and press OK.  
Note:  
3. Select On or Off and press  
.
52  
   
Silence All  
There may be times when you need to silence your phone  
entirely. The phone’s Silence All option allows you to mute all  
sounds without turning your phone off.  
To activate Silence All:  
With the phone open, press and hold the volume  
key down in standby mode. (The screen will display  
“Silence All.”)  
To deactivate Silence All:  
Press the volume key up repeatedly to select a desired  
volume level.  
TTS  
TTS or Text to Speech allows you to have the menu items read  
aloud as they are selected in the menu. When TTS is enabled,  
the key tone sound will be turned off.  
To enable TTS:  
1. Select Menu > Settings > Sounds > TTS > TTS Mode.  
2. Press the navigation key up or down to select Enable and  
press  
.
To change the volume:  
1. Select Menu > Settings > Sounds > TTS > TTS Volume.  
2. Press the navigation key left or right to select the  
desired volume level and press  
.
53  
   
Display Settings  
Changing the Text Greeting  
The text greeting can be up to 14 characters and is displayed  
on your phone’s screen in standby mode. You may choose to  
keep the phone’s default greeting (“Sprint”), or you may enter  
your own custom greeting.  
To display or change your greeting:  
1. Select Menu > Settings > Display > Greeting > Custom.  
2. Enter a custom greeting using your keypad and press  
existing greeting one character at a time, press  
To erase the entire greeting, press and hold  
.
.)  
Changing the Backlight Time Length  
The backlight setting lets you select how long the display  
screen and keypad are backlit after any keypress is made.  
To change the backlight setting:  
1. Select Menu > Settings > Display > Backlight >  
Main Display.  
2. Select a time setting and press  
.
To change the keypad setting:  
1. Select Menu > Settings > Display > Backlight > Keypad.  
2. Select a time setting and press  
.
Long backlight settings affect the battery’s talk and standby  
times.  
Note:  
54  
       
Changing the Display Screen  
Your new phone offers options for what you see on the  
display screen and when in standby mode.  
To change the display images on main LCD:  
1. Select Menu > Settings > Display > Screen Saver.  
2. Select Preset Image, My Content, or My Albums and  
press  
.
3. Choose the desired image and press  
to assign it as a  
screen saver.  
Changing the Brightness  
You can adjust your screen’s brightness to suit your  
surroundings.  
To adjust the display’s contrast:  
1. Select Menu > Settings > Display > Backlight > Brightness.  
2. Press your navigation key left or right to adjust the  
brightness and press  
.
Changing the Phone’s Menu Style  
Your phone allows you to choose how the menu appears on  
your display screen.  
To select the display’s menu style:  
1. Select Menu > Settings > Display > Menu Style.  
2. Select Grid style 1 or Grid style 2 to view each main menu  
item as a single screen icon, or List style to view the main  
menu as a list, and press  
.
55  
   
Changing the Font Color  
You can customize your phone’s display font by selecting a  
color scheme or style to reflect your personality.  
To change the display’s theme color:  
1. Select Menu > Settings > Display > Dialing Font > Color.  
2. Select Basic, Rainbow, Monochrome, or Hyphenate and  
press  
.
Changing the Dialing Font  
This setting allows you to adjust the display appearance  
when dialing phone numbers.  
To change the dialing font:  
1. Select Menu > Settings > Display > Dialing Font > Size.  
2. Select Large, Medium, or Small and press  
.
56  
 
Location Settings  
Your phone is equipped with a Location feature for use in  
connection with location-based services that may be  
available in the future.  
The Location feature allows the network to detect your  
position. Turning Location off will hide your location from  
everyone except 911.  
Turning Location on will allow the network to detect your  
position using GPS technology, making some Sprint PCS  
applications and services easier to use. Turning Location off  
will disable the GPS location function for all purposes except  
911, but will not hide your general location based on the cell  
site serving your call. No application or service may use your  
location without your request or permission. GPS-enhanced  
911 is not available in all areas.  
Note:  
To enable your phone’s Location feature:  
1. Select Menu > Settings > Others > Location. (The Location  
disclaimer is displayed.)  
2. Read the disclaimer and press  
3. Select On or Off press  
When the Location feature is on, your phone’s standby screen  
will display the icon. When Location is turned off, the  
icon will be displayed.  
.
.
57  
   
Messaging Settings  
Staying connected to your friends and family has never been  
easier. With your phone’s advanced messaging capabilities,  
you can send and receive many different kinds of text  
messages without placing a voice call. (For more information,  
Your phone’s messaging settings make text messaging even  
faster and easier by letting you decide how you would like to  
be notified of new messages, create a signature with each  
sent message, and create your own canned messages, to  
name just a few.  
Setting Message Alerts  
When new messages arrive, you can choose to have your  
phone notify you by playing an audible alert.  
To hear an alert when you receive a new message:  
1. Select Menu > Messaging > Settings > Message Alerts.  
2. Select Alert Volume, Alert Type, or Reminder and  
press  
.
3. Select the desired options and press  
.
58  
     
Deleting Old Messages  
You can delete messages that you’ve already read whenever  
you like, or you can have your phone delete them  
automatically for you when your phone's message memory  
becomes full.  
To automatically delete read messages:  
1. Select Menu > Messaging > Settings > Auto Erase.  
2. Select Yes or No and press  
.
Adding a Customized Signature  
Each message you send can have a customized signature to  
reflect your personality.  
To add a customized signature to each sent message:  
1. Select Menu > Messaging > Settings > Edit Signature.  
2. Select On and press  
signature to your outgoing messages, select Off and  
press  
.)  
. (If you do not wish to attach a  
3. Enter your signature and press Done (  
59  
   
Managing Preset Messages  
Your phone is programmed with 10 preset messages to help  
make sending text messages faster and easier. These messages,  
such as “Where are you?,” “Let’s get lunch,” and “Meet me at,”  
can be customized or deleted to suit your needs. You can even  
add your own preset messages to the list (up to 20 messages  
total).  
To edit or delete a preset message:  
1. Select Menu > Messaging > Settings > Preset Messages.  
(The list of preset messages is displayed.)  
2. To edit or delete a preset message, highlight it and press  
Edit (  
– or –  
Select Options(  
), and then select Erase to delete the  
selected message. Select Yes to confirm. (Select Noto  
cancel the deletion.)  
To add a new preset message:  
1. Select Menu > Messaging > Settings > Preset Messages.  
(The list of preset messages is displayed.)  
2. To add a new message, select the desired message  
location, press Options (  
and press . (Your new message will be added to the  
) and select Add New.  
beginning of the list.)  
60  
   
Airplane Mode  
Airplane Mode allows you to use many of your phone’s  
features, such as Games, Notepad, and Voice Memos when  
you are in an airplane or in any other area where making or  
receiving calls or data is prohibited. When your phone is in  
Airplane Mode, it cannot send or receive any calls or access  
online information.  
To set your phone to Airplane Mode:  
1. Select Menu > Settings > Others > Airplane Mode.  
2. Read the disclaimer and press  
3. Select On or Off and press  
.
.
While in Airplane Mode, your phone’s standby screen will  
display “Phone off.”  
TTY Use With Sprint PCS Service  
A TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are  
deaf, hard-of-hearing, or who have speech or language  
disabilities to communicate by telephone.  
Your phone is compatible with select TTY devices. Please  
check with the manufacturer of your TTY device to ensure  
that it supports digital wireless transmission. Your phone and  
TTY device will connect via a special cable that plugs into your  
phone's headset jack. If this cable was not provided with your  
TTY device, contact your TTY device manufacturer to purchase  
the connector cable.  
61  
       
When establishing your Sprint PCS Service, please call Sprint  
Customer Service via the state Telecommunications Relay  
Service (TRS) by first dialing  
. Then provide  
the state TRS with this number: 866-727-4889.  
To turn TTY Options on or off:  
1. Press Menu > Settings > Others > TTY Mode from standby  
mode. (An informational message is displayed.)  
2. Press  
3. Select TTY Off, TTY + Hear, TTY+ Talk, or TTY Full and  
press  
.
.
In TTY Mode, your phone will display the TTY access icon  
when a headset or TTY device is plugged in.  
Note:  
If TTY mode is enabled, the audio quality of non-TTY  
devices connected to the headset jack may be impaired.  
911 Emergency Calling  
WARNING  
Sprint recommends that TTY users make emergency  
calls by other means, including Telecommunications  
Relay Services (TRS), analog cellular, and landline  
communications. Wireless TTY calls to 911 may be  
corrupted when received by public safety answering  
points (PSAPs), rendering some communications  
unintelligible. The problem encountered appears  
related to TTY equipment or software used by PSAPs.  
This matter has been brought to the attention of the  
FCC, and the wireless industry and PSAP community  
are currently working to resolve this.  
62  
 
Updating Phone Software  
The update phone software option allows you to download  
and update the software in your phone automatically. Only  
the internal software is updated; no Contacts entries or other  
information saved to your phone will be deleted.  
To update your phone:  
1. Press Menu > Settings > Others > Update Phone SW from  
standby mode.  
2. Follow the onscreen instructions.  
Phone Setup Options  
Display Language  
You can choose to display your phone’s onscreen menus in  
English or in Spanish.  
To assign a language for the phone’s display:  
1. Select Menu > Settings > Others > Language.  
2. Select English or Español and press  
.
63  
         
Call Setup Options  
Call Setup options allow you to set up the following options:  
Abbreviated Dial allows you to program a five- or six-digit  
prefix for commonly used phone numbers.  
Contact Match allows you to turn the Contacts matching  
feature on or off.  
Restriction allows you to restrict outgoing calls.  
Call Answer allows you to set up how you answer  
incoming calls.  
Auto Answer allows you to answer incoming calls  
automatically with the optional hands-free car kit.  
Abbreviated Dialing  
Abbreviated dialing allows you to program a five- or six-digit  
prefix for commonly used phone numbers. When abbreviated  
dialing is on, you can enter the last four or five digits of any  
phone number that matches the five- or six-digit prefix, and  
the number is dialed.  
To set up abbreviated dialing:  
1. Select Menu > Settings > Others > Call Setup > Abbrev. Dial.  
2. Select On or Off and press  
3. Input the five- or six-digit prefix (for example, area code  
and prefix) and press  
.
.
64  
     
Making an Abbreviated Dial Call  
To make a call:  
1. Enter the last four or five digits of the prefix phone  
number.  
2. Abbrev. Dial is displayed in the lower left corner with the  
prefix digits displayed.  
If there is more than one Contacts entry that matches the last  
four or five digits, a list is displayed which allows you to select  
the desired number to call.  
Note:  
3. Press  
to make the call.  
Contact Match  
With the Contact Match feature, your phone displays the  
contact’s name and phone number if the incoming call or  
outgoing call is in your Contacts list.  
To access Contact Match:  
1. Select Menu > Settings > Others > Call Setup >  
Contact Match.  
2. Select On or Off and press  
.
65  
 
Restriction  
Allows you to restrict outgoing call options by selecting one  
of the following options:  
Allow all to allow outgoing calls to be made (no  
restrictions).  
Contacts only to allow outgoing calls to only those  
numbers saved in the Contacts list.  
Special# only to allow outgoing calls to only the numbers  
set up in the special numbers list. (See “Using Special  
To access call restriction:  
1. Select Menu > Settings > Others > Call Setup > Restriction.  
2. Enter your lock code.  
3. Select Outgoing Call and press  
4. Select Allow all, Contacts only, or Special# only and  
press  
.
.
Call Answer Mode  
You can determine how to answer incoming calls on your  
phone, whether by pressing  
, by pressing any number key,  
or simply by opening the phone.  
To set call answer mode:  
1. Select Menu > Settings > Others > Call Setup > Call Answer.  
2. To select an option, highlight it and press  
.
Any key to allow an incoming call to be answered by  
opening the phone or pressing any key.  
Talk key to require  
to be pressed to answer all  
incoming calls.  
Flip open to answer the call when the phone is  
opened.  
66  
   
Auto Answer Mode  
You may set your phone to automatically pick up incoming  
calls when connected to an optional hands-free car kit or a  
headset.  
To set Auto Answer mode:  
1. Select Menu > Settings > Others > Call Setup >  
Auto Answer.  
2. Select Yes to answer calls automatically when the phone  
is connected to a hands-free car kit or a headset (sold  
separately). Remember, your phone will answer calls in  
Auto Answer mode even if you are not present.  
67  
   
68  
Section 2C  
Setting Your Phone’s Security  
In This Section  
Security Features for Sprint PCS Vision  
By using the security settings on your phone, you receive peace of  
mind without sacrificing flexibility. This section will familiarize  
you with your phone’s security settings. With several options  
available, you can customize your phone to meet your  
personal needs.  
69  
   
Accessing the Security Menu  
All of your phone’s security settings are available through the  
Security menu. You must enter your lock code to view the  
Security menu.  
To access the Security menu:  
1. Select Menu > Settings > Security.  
2. Enter your lock code to display the Security menu.  
If you can’t recall your lock code, try using the last four digits  
of either your Social Security number or wireless phone  
number or try 0000 or NATL (6285). If none of these work, call  
Sprint Customer Service at 1-888-211-4PCS (4727).  
Tip:  
Using Your Phone’s Lock Feature  
Locking Your Phone  
When your phone is locked, you can only receive incoming  
calls or make calls to 911, Sprint Customer Service, or special  
To lock your phone:  
1. From the Security menu, select Lock Phone.  
2. Highlight Lock now and press  
lock the next time it is turned on, select On power-up  
and press  
.)  
. (To set your phone to  
70  
       
Unlocking Your Phone  
To unlock your phone:  
1. From standby mode, press Talk, Left/Right softkey,  
Volume key, or Menu/OK key.  
2. Enter your lock code.  
Calling in Lock Mode  
You can place calls to 911 and to your special numbers when  
in lock mode. (For information on special numbers, see  
To place an outgoing call in lock mode:  
To call an emergency number, special number, or Sprint  
Customer Service, enter the phone number and press  
.
Changing the Lock Code  
To change your lock code:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Change Lock.  
4. Enter your new lock code and press Next (  
).  
5. Re-enter your new lock code and press Done (  
).  
71  
   
Lock Services  
This setting allows you to lock voice call functions and  
Sprint PCS Vision services. When you enable Lock Services,  
you will be unable to make new calls (excluding emergency  
numbers) or to access the Vision services until the lock has  
been disabled in the Security menu.  
Locking Voice Services  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Lock Service and press  
.
4. Select Voice and press  
.
5. Select Lock and press  
.
Locking Sprint PCS Vision  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Lock Service and press  
.
4. Select PCS Vision and press  
.
5. Select Lock and press  
.
Locking Camera  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Lock Service and press  
.
4. Select Camera and press  
.
5. Select Lock and press  
.
72  
 
Locking Ready Link  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Lock Service and press  
.
4. Select Ready Link and press  
.
5. Select Lock and press  
.
Using Special Numbers  
Special numbers are important numbers that you have  
designated as being “always available.” You can call and  
receive calls from special numbers even if your phone is  
locked.  
You can save up to three special numbers in addition to  
your Contacts entries. (The same number may be in both  
directories.)  
To add or replace a special number:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Special #.  
4. Select a location for your entry and press  
5. Enter the number and press  
.
.
There are no speed dial options associated with special  
numbers.  
Note:  
73  
     
Erasing Contacts  
You can quickly and easily erase all the contents of your  
Contacts list.  
To erase all the names and numbers in your Contacts:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Erase > Erase Contacts.  
4. If you are certain you would like to erase all of your  
Contacts entries, select Yes and press  
.
Erasing My Content  
You can use your phone’s security menu to erase all content  
you have downloaded to your phone.  
To erase all downloads:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Erase > Erase My Contents.  
4. If you are certain that you would like to erase all content  
downloaded to your phone, select Yes and press  
.
74  
       
Erasing Voice Memos  
You can use your phone’s security menu to erase all voice  
memos saved in your phone.  
To erase all voice memos:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Erase > Erase Voice Memo.  
If you are certain that you would like to erase all voice memos  
saved in your phone, select Yes and press  
.
Erasing Pictures  
You can use your phone’s security menu to erase all pictures  
saved in your phone.  
To erase all pictures:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Erase > Erase Pictures.  
If you are certain that you would like to erase all pictures  
saved in your phone, select Yes and press  
.
75  
       
Erasing Messages  
You can use your phone’s security menu to erase all messages  
saved in your phone.  
To erase all messages:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Erase > Erase Messages.  
If you are certain that you would like to erase all messages  
saved in your phone, select Yes and press  
.
Default Settings  
The default settings option restores only those options that  
were set at the factory, including screen savers and  
ringer options.  
To reset to default settings:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Default Settings and press  
4. Select Yes and press  
5. Select Yes again and press  
.
.
to confirm.  
76  
   
Resetting Your Phone  
Resetting the phone restores all the factory defaults,  
including the ringer types and display settings. (Contacts are  
also deleted when resetting your phone.)  
Resetting your phone deletes all files that you have  
downloaded.  
Caution!  
To reset your phone:  
1. Select Menu > Settings > Security.  
2. Enter your lock code. (The Security menu is displayed.)  
3. Select Reset Phone and press  
4. If you are certain that you would like to restore all the  
factory settings, select Yes and press  
.
.
Security Features for Sprint PCS Vision  
Enabling and Disabling Sprint PCS Vision Services  
You can disable Sprint PCS Vision services without turning off  
your phone; however, you will not have access to all Sprint PCS  
Vision services, including Web and messaging. Disabling Sprint  
PCS Vision will avoid any charges associated with Vision  
services. While signed out, you can still place or receive phone  
calls, check voicemail, and use other voice services. You may  
enable Sprint PCS Vision services again at any time.  
To disable Sprint PCS Vision services:  
Select Menu > Settings > PCS Vision > Disable Vision.  
(A message will appear.)  
77  
       
To enable Sprint PCS Vision services:  
Select Menu > Settings > PCS Vision > Enable Vision.  
(A message will appear.)  
78  
 
Section 2D  
Controlling Your Roaming Experience  
In This Section  
Understanding Roaming  
Setting Your Phone’s Roam Mode  
Roaming is the ability to make or receive calls when you’re off the  
Nationwide Sprint PCS Network. Your new digital dual-band  
A640 by Samsung® works anywhere on the Nationwide  
Sprint PCS Network and allows you to roam on other 1900  
and 800 MHz digital networks where we’ve implemented  
roaming agreements with other carriers.  
This section explains how roaming works as well as special  
features that let you manage your roaming experience.  
79  
       
Understanding Roaming  
Recognizing the Roaming Icon on the Display Screen  
Your phone’s display screen always lets you know when  
you’re off the Nationwide Sprint PCS Network. Any time you  
are roaming, the phone displays the roaming icon (  
).  
Remember, when you are using your phone off the  
Nationwide Sprint PCS Network, always dial numbers using  
11 digits (1 + area code + number).  
Tip:  
Unless your Sprint PCS Service Plan includes roaming, you will  
pay a higher per-minute rate for roaming calls.  
Note:  
Roaming on Other Digital Networks  
When you’re roaming on digital networks, your call quality  
and security will be similar to the quality you receive when  
making calls on the Nationwide Sprint PCS Network.  
However, you may not be able to access certain features, such  
as Sprint PCS Vision.  
If you’re on a call when you leave the Nationwide Sprint PCS  
Network and enter an area where roaming is available, your  
call is dropped. If your call is dropped in an area where you  
think Sprint PCS Service is available, turn your phone off and  
on again to reconnect to the Nationwide Sprint PCS Network.  
Note:  
Checking for Voicemail Messages While Roaming  
When you are roaming off the Nationwide Sprint PCS  
Network, you will not receive on-phone notification of new  
voicemail messages. Callers can still leave messages, but you  
will need to periodically check your voicemail for new  
messages if you are in a roaming service area for an extended  
time.  
80  
 
To check your voicemail while roaming:  
1. Dial 1 + area code + your wireless phone number.  
2. When you hear your voicemail greeting, press  
.
3. Enter your passcode at the prompt and follow the voice  
prompts.  
When you return to the Nationwide Sprint PCS Network,  
voicemail notification will resume as normal.  
Setting Your Phone’s Roam Mode  
Your phone allows you to control your roaming capabilities.  
By using the Roaming menu option, you can determine which  
signals your phone accepts.  
Set Mode  
Choose from three different settings on your digital dual-  
band phone to control your roaming experience.  
To set your phone’s roam mode:  
1. Select Menu > Settings > Roaming > Set Mode.  
2. To select an option, highlight it and press  
.
Automatic seeks Sprint PCS Service. When Sprint PCS  
Service is unavailable, the phone searches for an  
alternate system.  
Roaming only forces the phone to seek a roaming  
system. The previous setting (Sprint or Automatic) is  
restored the next time the phone is turned on.  
Sprint allows you to access the Nationwide  
Sprint PCS Network only and prevents roaming on  
other networks.  
81  
   
Using Call Guard  
Your phone has two ways of alerting you when you are  
roaming off the Nationwide Sprint PCS Network: the  
onscreen roaming icon and Call Guard. Call Guard makes it  
easy to manage your roaming charges by requiring an extra  
step before you can place or answer a roaming call. (This  
additional step is not required when you make or receive calls  
while on the Nationwide Sprint PCS Network.)  
To turn Call Guard on or off:  
1. Select Menu > Settings > Roaming > Call Guard.  
2. Highlight On or Off and press  
.
Voice dialing and speed dialing are not available when you  
are roaming with Call Guard enabled.  
Note:  
To place roaming calls with Call Guard on:  
1. From standby mode, dial 1 + area code + the seven-digit  
number and press  
2. A message is displayed stating “Roaming rate applies.  
Press 1 to call.” To place the call, press  
To answer incoming roaming calls with Call Guard on:  
1. Press  
2. A message is displayed stating “Roaming rate applies.  
.
.
.
Press 1 to answer.” To answer the call, press  
.
82  
     
Data Roaming  
The data roaming option allows you to send and receive data  
while you are out of your normal coverage area. All applicable  
charges apply for accessing the available network.  
To turn data roaming on or off:  
1. Select Menu > Settings > Roaming > Data Roaming.  
2. Highlight On or Off and press  
.
83  
   
84  
Section 2E  
Managing Call History  
In This Section  
The Call History keeps track of incoming calls, calls made from  
your phone, and missed calls. This section guides you through  
accessing and making the most of your Call History.  
85  
     
Viewing History  
You’ll find the Call History feature very helpful. It is a list of  
the last 20 phone numbers (or Contacts entries) for calls you  
placed, accepted, or missed. Call History makes redialing a  
number fast and easy. It is continually updated as new  
numbers are added to the beginning of the list and the oldest  
entries are removed from the bottom of the list.  
Each entry contains the phone number (if it is available) and  
Contacts entry name (if the phone number is in your  
Contacts). Duplicate calls (same number and type of call) may  
only appear once on the list.  
To view a Call History entry:  
1. Select Menu > Call History.  
2. Select Outgoing Calls, Incoming Calls, Missed Calls, or  
Recent Calls and press  
.
3. Highlight the entry you wish to view and press  
.
86  
 
Call History Options  
For additional information and options on a particular call,  
highlight a Call History entry and press  
displays the date and time of the call, the phone number (if  
available), and the caller’s name (if the number is already in  
. This feature  
your Contacts). By pressing Options (  
), you can select from  
the following options:  
Call: Speaker to call the highlighted number using the  
speakerphone option.  
Send Msg to send a Text Msg., Picture, SMS Voice, or Hand  
message.  
Save to save the number if it is not already in your  
Prepend to add numbers to the beginning of the selected  
Erase to delete the entry.  
Erase All to delete all entries listed.  
You can also view the next Call History entry by pressing the  
navigation key right or view the previous entry by pressing  
the navigation key left.  
Tip:  
87  
 
Making a Call From Call History  
To place a call from Call History:  
1. Select Menu > Call History.  
2. Select Outgoing Calls, Incoming Calls, Missed Calls, or  
Recent Calls and press  
3. Use your navigation key to select a Call History entry  
and press  
.
.
You cannot make calls from Call History to entries identified  
as No Caller ID, Unknown, or Restricted.  
Note:  
Saving a Phone Number From Call History  
Contacts entries can store up to a total of five phone  
numbers, and each entry’s name can contain 20 characters.  
To save a phone number from Call History:  
1. Select Outgoing Calls, Incoming Calls, Missed Calls, or  
Recent Calls and press  
2. Use your navigation key to select the desired entry and  
select Options ( ).  
3. Select Save and press  
.
.
4. Select New Entry and press  
.
5. Select a Type and press  
.
6. Enter a name for the entry using the keypad and  
press  
.
88  
         
7. Select Done (  
) to save and exit.  
After you have saved the number, the Find screen is  
You cannot save phone numbers already in your Contacts or  
from calls identified as No Caller ID, Unknown, or Restricted.  
Note:  
Prepending a Phone Number From  
Call History  
If you need to make a call from Call History and you happen  
to be outside your local area code, you can add the  
appropriate prefix by prepending the number.  
To prepend a phone number from Call History:  
1. Select a Call History entry, select the number or the  
name and press  
.
2. Press Options (  
) and select Prepend.  
3. Enter the prefix and press  
.
Erasing Call History  
To erase individual Call History entries, see “Call History  
To erase Call History:  
1. Select Menu > Call History.  
2. Select Outgoing Calls, Incoming Calls, Missed Calls, or  
Recent Calls and press  
3. Press Options ( ) and select Erase for the highlighted  
entry or Erase All for all entries and press  
.
.
89  
         
90  
Section 2F  
Using Contacts  
In This Section  
Now that you know the basics that make it easier to stay in  
touch with people and information, you’re ready to explore your  
phone’s more advanced features. This section explains how to  
use your phone’s Contacts and helps you make the most of  
your contacts and time when you are trying to connect with  
the important people in your life.  
91  
       
Adding a New Contacts Entry  
Your phone's Contacts list can store up to 299 entries and  
each entry’s name can contain 20 characters.  
To add a new entry:  
1. Select Menu > Contacts > Add New Entry.  
Enter the phone number in standby mode and press  
OK. Proceed with steps 2-5.  
Shortcut:  
2. Enter a name for the new entry and press the navigation  
3. Enter the phone number and press  
4. Highlight the desired label entry (Mobile, Home, Work,  
Pager, or Others) and press  
5. Select Done ( ).  
.
.
After you have saved the number, the Find entry screen is  
92  
   
Finding Contacts Entries  
There are several ways to display your Contacts entries: by  
name, by speed dial number, by group, and by voice dial tags.  
Follow the steps outlined in the sections below to display  
entries from the Contacts menu.  
Finding Names  
To find Contacts entries by name:  
1. Select Menu > Contacts > Find.  
2. Scroll through all the entries using your navigation key.  
– or –  
3. Enter the first letter of a name or part of a name (such  
as “ave” for “Dave”). (The more letters you enter, the  
more your search narrows.)  
4. To display an entry, highlight it and press  
.
5. To dial the entry’s default phone number, press  
.
– or –  
To display additional Contacts entries, press the  
navigation key left or right.  
From standby mode, press Contacts (right softkey) to  
display the Contacts menu.  
Shortcut:  
93  
     
Finding Speed Dial Numbers  
To find phone numbers you have stored in speed dial locations:  
1. Select Menu > Contacts > Speed Dial #s.  
2. Scroll through speed dial entries using your navigation  
key. Speed dial numbers are displayed in numeric order.  
– or –  
Enter the number of a speed dial location using your  
keypad.  
3. To display an entry, highlight it and press  
.
4. To dial the entry’s default phone number, press  
.
Finding Group Entries  
To find entries designated as part of a group:  
1. Select Menu > Contacts > Group.  
2. Scroll through the group titles using your navigation  
key. To display entries belonging to a group, highlight  
the group and press  
.
3. Navigate through the group to find the desired contact.  
4. To dial the entry’s default phone number, press  
.
94  
Contacts Entry Options  
To access a Contacts entry’s options, highlight the entry and  
press Options (  
) > Edit. Highlight one of the options listed  
below and press  
.
[Contact Name] to edit the contact entry name.  
[Add Number] to add a phone number to the entry. (See  
[Email] to add an email address to the entry.  
[URL] to add a Web site’s URL to the entry.  
[Nickname] to add a unique text identifier to the contact.  
[Memo] to add a memo to the contact entry.  
[Group] to assign the entry to a group.  
[Ring] to assign a preprogrammed or downloaded ringer.  
[Image] to assign a predefined image to a Contacts entry.  
You can view the next entry by pressing the navigation key  
right or view the previous entry by pressing the navigation  
key left.  
Tip:  
95  
   
Adding a Phone Number to a Contacts  
Entry  
To add a phone number to an entry:  
on page 93) and press  
2. Press Edit ( ).  
3. Highlight the desired label, enter the new phone  
number, and press  
4. Press Done ( ) to save the new number.  
.
.
Editing a Contacts Entry’s Phone Number  
To edit an entry’s phone number:  
1. Display a Contacts entry (see page 93) and press  
2. Press Edit ( ).  
3. Highlight the number you wish to edit and press  
.
.
4. Press  
to clear one digit at a time, or press and  
to erase the whole number.  
hold  
5. Re-enter or edit the number and press  
6. Press Done ( ) to save the number.  
.
96  
       
Assigning Speed Dial Numbers  
Your phone can store up to 99 phone numbers in speed dial  
locations. For details on how to make calls using speed dial  
Speed dial numbers can be assigned when you add a new  
Contacts entry, when you add a new phone number to an  
existing entry, or when you edit an existing number.  
To assign a speed dial number to a new or existing phone number:  
1. Add a phone number to a new or existing Contacts  
2. Highlight the contact entry and press  
3. Select Edit ( ).  
.
4. Highlight the desired number and select Options (  
) >  
Speed Dial.  
5. Select an available speed dial location and press  
for Assign.  
6. Press Done (  
) to return to the Contacts menu.  
If you attempt to assign an already in-use speed dial location  
to a new phone number, a dialog will appear asking if you  
wish to replace the existing speed dial assignment. Select Yes  
to assign the location to the new phone number and delete  
the previous speed dial assignment.  
Note:  
97  
   
Editing a Contacts Entry  
To make changes to an entry:  
1. Display a Contacts entry and highlight the name of the  
person you wish to edit.  
2. Press Edit (  
3. Highlight the part of the entry you wish to edit (Name,  
Group, Ringer, etc.) and press  
4. Edit the desired information and press  
5. Press Done ( ) to save your changes.  
).  
.
.
Selecting a Ringer Type for an Entry  
You can assign a ringer type to a Contacts entry so you can  
identify the caller by the ringer type. (See “Ringer Types” on  
To select a ringer type for an entry:  
1. Display a Contacts entry and highlight the name of the  
person you wish to edit.  
2. Press Edit (  
).  
3. Highlight the current ringer type and press  
.
4. Select the desired ringer category and press  
down.  
5. Press  
left or right to scroll through available ringers.  
(When you highlight a ringer type, a sample ringer will  
sound.)  
6. Press  
to save the new ringer type.  
) to save your changes.  
7. Press Done (  
98  
     
Wireless Backup  
This feature allows you to back up all of your Contacts to the  
Sprint Web site and restore them if your phone is lost, stolen,  
damaged, or replaced.  
To use the wireless backup service, you are required to  
activate the service from your phone.  
Note:  
Wireless backup can also be activated by selecting MENU >  
Settings > Wireless Backup and following steps 2–4 below.  
Note:  
To activate Wireless Backup service:  
1. Select Menu > Contacts > Wireless Backup.  
2. Select Subscribe. (You will be prompted to confirm your  
license status.)  
3. Select Yes to continue and follow the onscreen  
instructions to purchase the license.  
4. Please wait while registering the license. (You will see a  
confirmation screen if it has been successfully  
registered.)  
You can unsubscribe from the wireless backup service only  
through the Sprint Web site.  
Note:  
99  
 
Subscribe  
To subscribe to the wireless backup service, you will need to  
purchase a license to use the wireless backup service via the  
Sprint vending machine, accessed through the WAP browser  
on your phone The license expires after a set period of time  
and must be renewed regularly. As part of the initial  
subscription process, a random wireless backup password is  
generated. The randomly-generated password will be sent to  
the handset as an SMS text message.  
(Subscribe Launches the subscription process. If you are  
already subscribed to wireless backup, Unsubscribe will be  
displayed.)  
To deactivate Wireless Backup service:  
1. Select Menu > Contacts > Wireless Backup.  
2. Select Unsubscribe. (A message will be displayed.)  
3. Follow the onscreen instructions to unsubscribe from  
the wireless backup service.  
Alert  
The Alert feature displays an alert each time a wireless  
backup update is completed.  
To activate the alert:  
1. Select Menu > Contacts > Wireless Backup > Alert.  
2. Select On or Off and press  
.
Learn More  
Learn More displays a short description of the features and  
functionality of Wireless Backup.  
To view the description:  
Select Menu > Contacts > Wireless Backup > Learn More.  
100  
Dialing Sprint PCS Services  
Your Contacts list is preprogrammed with contact numbers  
for various Sprint PCS Services.  
To dial a service from your Contacts:  
1. Select Menu > Contacts > Services.  
2. Select Account Info, Customer Service, Dir Assist, Sprint  
Operator, or Sprint Voice Command.  
3. Press  
to place the call.  
To dial a service from standby mode using your keypad:  
1. Dial the appropriate service number:  
Account Info. –  
Customer Service –  
Dir Assist –  
Sprint Operator –  
Sprint Voice Command –  
2. Press  
to place the call.  
101  
     
102  
Section 2G  
Using the Phone’s Scheduler and Tools  
In This Section  
Your phone is equipped with several personal information  
management features that help you manage your busy lifestyle.  
This section shows you how to use these features to turn your  
phone into a time management planner that helps you keep  
up with your contacts, schedules, and commitments. It takes  
productivity to a whole new level.  
103  
     
Using Your Phone’s Scheduler  
Adding an Event to the Scheduler  
Your Scheduler helps organize your time and reminds you of  
important events.  
To add an event:  
1. Select Menu > Tools > Scheduler.  
2. Using your navigation key, highlight the day to which  
you would like to add an event and press  
.
Press the navigation key up or down to scroll by week through  
the Scheduler.  
Tip:  
3. Select Options (  
) > Add New (  
).  
If there are not any events scheduled for the selected day, the  
New Event screen is automatically displayed.  
Note:  
4. Enter a title for the event and press Next (  
5. Select an initial time and date for the event by entering  
the Start time and Date.  
Using your keypad, enter the start time and date for  
the event.  
6. Select an end time and date for the event by  
highlighting the End time and Date.  
Using your keypad, enter the end time and date for  
the event.  
7. Select an alarm time for the event by highlighting the  
alarm field and pressing the navigation key left or right  
to select one of the following:  
104  
   
No Alarm, On Time, 10min before, 30min before, or  
1 Hr before.  
8. Select Done (  
) to save and exit.  
Event Alerts  
There are several ways your phone alerts you to scheduled  
events:  
By playing the assigned ringer type.  
By illuminating the backlight.  
Event Alert Menu  
When your phone is turned on and you have an event alarm  
scheduled, your phone alerts you and displays the event  
summary. To silence the alarm and reset the schedule,  
press  
.
Viewing Events  
To view your scheduled events:  
1. Select Menu > Tools > Scheduler.  
2. Using your navigation key, select the day for which you  
would like to view events and press  
. (If you have  
events scheduled for the selected day, they will be listed  
in chronological order.)  
In the Scheduler view, days with events scheduled are  
highlighted.  
Tip:  
3. To display the details of an event listed in the schedule,  
highlight it and press  
.
105  
Going to Today’s Scheduler Menu  
To go to the Scheduler menu for today’s date:  
Select Menu > Tools > Today.  
Erasing a Day’s Events  
To erase a day’s scheduled events:  
1. Select Menu > Tools > Scheduler.  
2. Using your navigation key, highlight the day for which  
you would like to erase events and press  
.
In the Scheduler view, days with events scheduled are  
highlighted.  
Tip:  
3. Press Options (  
) and select Erase or Erase All. (An alert  
will appear notifying you of the number of events to be  
erased.)  
4. Select Yes to confirm or No to cancel.  
106  
 
Using Your Phone’s Alarm Clock  
Your phone comes with a built-in alarm clock with multiple  
alarm capabilities.  
To use the alarm clock:  
1. Select Menu > Tools > Alarm Clock.  
2. Select Alarm #1, Alarm #2, or Alarm #3 and press  
.
3. Turn the alarm on or off by highlighting the activation  
field.  
Press  
left or right to select On or Off .  
4. Select a time for the alarm by highlighting the time  
field.  
Use your keypad to enter an alarm time.  
5. Select a ringer type for the alarm by highlighting the  
ringer field and pressing  
left or right.  
6. Select a repeating status for the alarm by highlighting  
the Repeat field.  
Press  
Sat&Sun, or Daily .  
7. Select Done ( ).  
left or right to select Once, MontoFri,  
107  
   
Using Your Phone’s Memo Pad  
Your phone comes with a memo pad you can use to compose  
and store reminders and notes to help keep you organized.  
To compose a note:  
1. Select Menu > Tools > Memo Pad .  
If there are no memos saved yet, the New Memo screen is  
automatically displayed.  
Note:  
2. Select Options (  
) and press  
for Add New.  
3. Type your note using the numeric keypad and press  
To read a saved note:  
1. Select Menu > Tools > Memo Pad.  
2. Highlight a note and press  
.
To delete saved notes:  
1. Select Menu > Tools > Memo Pad.  
2. Highlight a note and select Options (  
3. Select Erase or Erase All and press  
).  
.
4. Select Yes and press  
.
If Erase All is selected, all memos saved in your phone will be  
erased.  
Note:  
108  
   
Using Your Phone’s Tools  
In addition to helping you be more efficient and organized,  
your phone offers useful and entertaining tools.  
Using the Calculator  
Your phone comes with a built-in calculator.  
To use the calculator:  
1. Select Menu > Tools > Calculator.  
2. Enter the first number using your keypad.  
Press the navigation key up for Multiplication (x).  
Press the navigation key down for Division (÷).  
Press the navigation key left for Subtraction (-).  
Press the navigation key right for Addition (+).  
Press  
Press  
Press  
or  
for a decimal point.  
for a negative number.  
to clear all numbers.  
3. Enter the second number and press  
for Equals (=).  
109  
   
Task List  
This option allows you to manage daily tasks that include  
dates, times, and priority levels.  
1. Select Menu > Tools > Task List.  
If there are no tasks saved, the New Task screen is  
automatically displayed.  
Note:  
2. Select Options (  
3. Enter the task name using the keypad and press  
4. Select a due time by highlighting the Due Time field.  
Using the keypad, enter the due time of the task.  
5. Select a due date by highlighting the Due Date field.  
Using the keypad, enter the due date of the task.  
6. Select a priority level by highlighting the Priority field.  
) > Add New .  
.
Press the navigation key left or right to select Low  
or High.  
7. Select Done (  
) to save and exit.  
110  
 
Countdown  
This option allows you to enter a timer that counts down to  
an event based on a date and time specified.  
1. Select Menu > Tools > Countdown.  
If there are no countdowns saved, the New Countdown screen  
is automatically displayed.  
Note:  
2. Select Options (  
3. Enter the countdown name using the keypad and  
press  
4. Select a time by highlighting the Input Time field.  
Using the keypad, enter the time of the countdown.  
5. Select a date by highlighting the Input Date field.  
Using the keypad, enter the date of the countdown.  
) and press  
for Add New.  
.
6. Select Done (  
) to save and exit.  
World Time  
To view the time in 24 different locations:  
1. Select Menu > Tools > World Time.  
2. Press the navigation key left or right to scroll through  
different cities and time zones.  
3. Press Options (  
) > DST Setting (  
) to turn daylight  
saving time on or off.  
111  
   
112  
Section 2H  
Using Your Phone’s Voice Services  
In This Section  
Your phone’s Voice Services let you place calls using your voice,  
store voice reminders, and record memos right on your phone.  
This section includes easy-to-follow instructions on using  
voice-activated dialing and managing voice memos.  
113  
   
Activating Voice Recognition  
Voice recognition allows you to say commands to perform  
common functions supported by your phone. There is no  
voice training required to use the voice recognition feature.  
You simply say the predesignated command displayed on  
your screen in a normal tone of voice to perform the desired  
function.  
To activate voice recognition:  
1. Press and hold  
or  
. (The phone prompts you  
to say a voice command.)  
2. Wait for the beep and then say one of the following  
commands:  
Voice Dial  
Contacts  
Voice Memo  
Status  
My Phone #  
When it recognizes one of these commands, the phone  
launches the associated application. If the phone does not  
hear a command within approximately eight seconds, it  
deactivates voice recognition without taking any action.  
If you want to use a different button to activate voice  
recognition, press the left softkey for Menu and select  
Settings. Press 7 for Launch Pad. On this menu, you can  
change button assignments, including the button used to  
launch “Voice Dial,” which is the voice recognition  
application.  
Note:  
114  
 
Using Voice Dial  
Voice Dial allows you to dial any valid seven- or ten-digit  
North American phone number or Contacts entry by speaking  
the number or name naturally, without pausing.  
Tips for using Voice Dial:  
Voice Dial works best in quieter environments.  
When saying a number (Digit Dialing), speak at a normal  
speed and say each digit clearly. There is no need to pause  
between digits.  
The phone recognizes the digits one, two, three, four, five,  
six, seven, eight, nine, and zero or oh. The phone does not  
recognize numbers such as “one eight hundred” for “1-  
800.” Instead, say “one-eight-zero-zero.”  
The phone recognizes only valid seven- or ten-digit North  
American phone numbers.  
If your phone does not usually recognize you correctly  
when you are using Digit Dial, try adapting Digit Dial to  
your voice, which can significantly improve accuracy for  
details.)  
To place a call using Voice Dial:  
1. Activate voice recognition by pressing and holding  
.
(The phone prompts you for a command.)  
2. Say “Voice Dial.” (The phone prompts you to say the  
name or number clearly.)  
3. Say a valid contact entry or seven- or ten-digit North  
American phone number naturally and clearly, or say a  
name from your Contacts.  
4. If the phone asks you, “Did you say,” followed by the  
correct name or number, say “Yes.”  
115  
     
5. If the phone asks you, “Did you say,” followed by an  
incorrect name or number, say “No.” (If there are other  
alternatives, the phone will prompt you with the next  
one. You can also select the desired number by using  
the navigation key. The phone will then dial the  
number.)  
Enabling/Disabling Digit Dial Choice Lists  
You can customize whether the Digit Dial feature displays the  
list of top voice recognition choices or automatically dials the  
first number, without displaying a choice list.  
To enable or disable choice lists for Digit Dial:  
1. Press Menu> Voice Kit > Voice Service.  
2. Press  
for Settings.  
3. Select Choice Lists and press  
.
4. Select Digit Dialing and press  
.
5. Press the navigation key up or down to select Automatic,  
Always On, or Always Off and press  
.
116  
Adapting Digit Dial  
Digit Dialing is speaker-independent, which means that no  
training or adaptation is required. Some users with heavy  
accents or unusual voice characteristics may find difficulty in  
achieving high accuracy with speaker-independent Digit  
Dialing, so the Adapt Digits feature allows users to  
dramatically improve the digit accuracy through adaptation.  
Users who get acceptable digit recognition accuracy will find  
no additional benefit to performing the Adapt Digit  
adaptation.  
After you adapt Digit Dial, your phone will be customized to  
your voice. Other people will not be able to use Digit Dial on  
your phone unless they reset the phone to factory defaults.  
Adapt Digit Dial ONLY if the system frequently misrecognizes  
your speech. You can always restore the system to its original  
factory setting.  
Note:  
Adaptation involves recording several digit sequences to  
teach the system your voice. The adaptation process takes  
about three minutes.  
Tips for adapting Digit Dial:  
Adapt digits in a quiet place.  
Make sure you wait for the beep before starting to speak.  
Speak clearly, but say each digit sequence naturally.  
If you make a mistake while recording a sequence of  
digits, or if there is an unexpected noise that spoils the  
recording, you can say “No” or select No when the prompt  
asks, “Did the recording sound OK?” You will then be  
prompted to rerecord the sequence.  
117  
 
To adapt Digit Dial to your voice:  
1. Press Menu> Voice Kit > Voice Service.  
2. Press  
for Settings.  
3. Select Digit Dialing and press  
.
4. Select Adapt Digits and press  
. (The phone displays  
the first digit sequence.)  
5. When you are ready to start recording, press  
. (The  
phone prompts you to say the first sequence of digits.)  
6. Wait for the beep, and then repeat the digits using a  
normal tone of voice. (The phone plays back your  
recording and asks you if the recording sounds OK.)  
If the recording sounds OK (no mistakes and no  
background noises), say “Yes.”  
If you need to rerecord the digits to fix any  
problems, say “No.” (The phone then prompts you to  
say the digits again.)  
7. Wait for the beep, and then record the digits again.  
(Repeat this step until you are satisfied with the  
recording.)  
8. After confirming that the recording sounds OK, repeat  
the recording process with the next set of digits.  
9. Repeat steps 8-10 for another nine sets of digits.  
10. When you are finished with a full session, you will reach  
a screen that reads, Adaptation Complete.”  
118  
Resetting Digit Dial Adaptation  
To erase any adaptation and reset Digit Dial to its original state:  
1. Press Menu> Voice Kit > Voice Service.  
2. Press  
for Settings.  
3. Select Digit Dialing and press  
.
4. Select Reset Digits and press  
.
5. Press  
to select OK.  
Using Contacts  
Contacts allows you to retrieve contact information for any  
entry saved in your Contacts list by saying the full name of  
the person.  
To retrieve information using Contacts command:  
1. Activate voice recognition by pressing and holding  
.
(The phone will prompt you for a command.)  
2. Say “Contacts.” (The phone will prompt you to say the  
name.)  
3. Say the full name of the person, exactly as it is entered  
in your Contacts list. (The phone will play the name it  
recognized through the earpiece, and then open the  
contact information for that name.)  
Enabling/Disabling Contacts Choice Lists  
You can customize whether the Contacts feature displays a  
list of choices for names that sound alike, or brings up  
information for the first recognized name without displaying  
a choice list.  
119  
 
To enable or disable choice lists for the Contacts command:  
1. Press Menu> Voice Kit > Voice Service.  
2. Press  
for Settings.  
3. Select Choice Lists and press  
.
4. Select Contacts and press  
.
5. Press the navigation key up or down to select Automatic,  
Always On, or Always Off and press . (When choice  
lists are enabled for contacts, after you say the name,  
the phone will display one or more names on the screen  
and prompt you to confirm the name you spoke.)  
If the phone says, “Did you say,” followed by the  
correct name, say “Yes.”  
If the phone says, “Did you say,” followed by an  
incorrect name, say “No.” The phone then prompts  
you with the next name, if there is one. If there are  
no more names, the phone will say “Sorry, no match  
found.”  
Voice Memos  
You can use your phone’s voice recognition feature or the  
main menu option to record brief memos to remind you of  
important events, phone numbers, or grocery list items.  
Recording Voice Memos Using Voice Recognition  
To record a voice memo using voice recognition:  
1. Press and hold  
to activate voice recognition. (The  
phone prompts you to say a voice command.)  
2. Wait for the beep and say “Voice Memo.”  
3. Start recording the memo after the beep.  
4. Select Finish ( ).  
120  
   
Recording Voice Memos Using the Main Menu  
Option  
To record a voice memo using the main menu option:  
1. Press Menu> Voice Kit > Voice Memo.  
2. Select Record and press  
. (The phone prompts you to  
start recording after the beep.)  
3. Wait for the beep and then start speaking. (As it is  
recording, the phone displays a countdown timer that  
shows how many seconds are left for recording.)  
4. To pause the memo, select Pause ( ). To resume the  
recording, select Resume (  
).  
5. To finish recording, select Finish ( ).  
To record the other party during a phone call:  
1. During a call, select Options ( ).  
2. Select Voice Memo (A one-minute counter is displayed  
on the screen to indicate the amount of time a single  
voice memo can be recorded.)  
Only incoming audio is recorded when Voice Memo is  
selected during a call.  
Note:  
3. To pause the memo, select Pause ( ). To resume the  
recording, select Resume ( ).  
4. To finish recording, select Finish ( ).  
A total of 10 one-minute memos can be recorded and saved.  
Tip:  
121  
Reviewing and Erasing Memos  
To play the voice memos you have recorded:  
1. Press Menu> Voice Kit > Voice Memo.  
2. Select Review and press  
. (The phone displays a list of  
saved memos, with the first one selected.)  
3. Highlight the desired memo and press  
.
or —  
Press the number corresponding to the memo you want  
to review.  
To erase an individual memo:  
1. Press Menu> Voice Kit > Voice Memo.  
2. Select Review and press  
.
3. Highlight the desired memo to erase and select  
Options ( ) > Erase.  
4. Select Yes and press  
.
To erase all voice memos:  
1. Press Menu> Voice Kit > Voice Memo.  
2. Select Review and press  
.
3. Select Erase All and press  
.
4. Select Yes and press  
.
122  
Phone Status Information  
The voice recognition Status option gives you an update on  
your phone's service, signal strength, and battery level.  
To retrieve your phone's status information:  
1. Press and hold  
to activate voice recognition. (The  
phone prompts you to say a voice command.)  
2. Wait for the beep and say “Status.” (The following chart  
outlines the status responses.)  
No Coverage - When handset is scanning.  
Sprint Coverage - Handset is on a non-roam system.  
Digital Roam - Handset is on a digital roam system.  
Coverage  
High - Number of bars displayed is 4 or more.  
Signal Strength  
Good - Number of bars displayed is 2/3.  
Low - Number of bars displayed is 0/1.  
No Signal - Handset is scanning for system.  
High - Number of bars displayed in the  
battery icon is 3.  
Battery  
Medium - Number of bars displayed in the  
battery icon is 2.  
Low - Number of bars displayed in the  
battery icon is 1.  
Empty - Low battery alert.  
123  
 
My Phone Number  
You can use your phone’s Voice Services to hear and display  
your phone number onscreen.  
Getting Your Phone Number  
To access your phone number:  
1. Press and hold  
to activate voice recognition. (The  
phone prompts you to say a voice command.)  
2. Wait for the beep and say “My Phone Number.”  
124  
   
Section 2I  
Using the Built-in Camera  
In This Section  
Sending Sprint PCS Picture Mail  
Your phone’s built-in camera gives you the ability to take full-  
color digital pictures, view your pictures using the phone’s display,  
and instantly send them to family and friends. It’s fun and as  
easy to use as a traditional point-and-click camera: just take a  
picture, view it on your phone’s display, and send it from your  
phone to up to 10 people.  
This section explains the features and options of your  
phone’s built-in camera.  
125  
     
Taking Pictures  
Taking pictures with your phone’s built-in camera is as simple  
as choosing a subject, pointing the lens, and pressing a  
button. You can activate the phone’s camera mode whether  
the phone is open or closed.  
To take a picture with the phone open:  
1. Press Menu > Pictures > Camera (Additional camera  
options are available through the camera mode Options  
more information.)  
To activate camera mode, you can also press the  
camera button (see illustration).  
Shortcut:  
2. Using the phone’s main LCD as a viewfinder, aim the  
camera lens at your subject. Press the volume key to  
display the image right-side up or upside down.  
3. Press  
to capture the image. (The picture will  
automatically be saved in the In Phone folder.)  
To return to camera mode to take another picture,  
press the camera key.  
4. Press  
for Next:  
Send Msg to send the picture to up to 10 contacts at  
one time. (See page 133 for details.)  
Upload to upload the picture you just took to the  
Sprint PCS Picture Mail Web site (www.sprint.com/  
picturemail). Depending on your settings, you may be  
prompted to accept a Sprint PCS Vision connection.  
Assign to assign the picture as a Picture ID, Screen  
Saver, or Incoming Call.  
126  
   
Erase to delete the picture you just took.  
Camera Mode to return to the camera to take  
additional pictures.  
Review Pictures to go to the In Phone folder to review  
your saved pictures.  
Postcard to take a picture of handwritten text and  
digitize the writing into your image. Once placed in  
the image, you can modify the colors, placement,  
and various other features.  
Creating Your Sprint PCS Picture Mail Password  
The first time you use any of the picture management  
options involving the Sprint PCS Picture Mail Web site, you  
will need to establish a Sprint PCS Picture Mail password  
through your phone. This password will also allow you to sign  
in to the Sprint PCS Picture Mail Web site at www.sprint.com/  
picturemail to access and manage your uploaded pictures and  
albums.  
To create your Sprint PCS Picture Mail password:  
1. Select Menu > Pictures > Online Albums.  
2. Select View Albums or Upload Picture and press  
.
(You will be prompted to Connect/Always Auto-connect.  
Enable PCS Vision if necessary and create a Sprint PCS  
Picture Mail password for your account by following the  
onscreen instructions.)  
If your Sprint PCS Service Plan does not include Sprint PCS  
Picture Mail, you will first be prompted to subscribe to the  
service for an additional monthly charge.  
Note:  
3. Enter a four- to eight-digit password and press  
will be prompted to confirm your password.)  
. (You  
4. Please wait while the system creates your account.  
127  
   
Write down your Sprint PCS Picture Mail password in a secure  
place.  
Tip:  
Once you have received confirmation that your account has  
been successfully registered, you may upload and share  
pictures and access the Sprint PCS Picture Mail Web site.  
Camera Mode Options  
When the phone is open and in camera mode, press  
display additional camera options:  
to  
Self Timer to activate the camera’s timer. (See “Setting the  
Camera Self-Timer” on page 129.)  
Fun Tools to select from the following options:  
Fun Frames to select your favorite fun picture frame  
to decorate your picture.  
Color Tones to select a wide variety of color tones for  
the picture (Auto, Sepia, Mono, Warm, or Cool). (The  
default setting is Auto.)  
Controls to select from the following options:  
Brightness to manually set the brightness. Press the  
navigation key right (increase) or left (decrease) to  
select a setting.  
White Balance to adjust white balance based on  
changing conditions. Select from Auto, Sunny,  
Cloudy, Tungsten, Fluorescent, or Manual.  
Settings to select Resolution, Quality, Shutter Sound,  
Auto Erase, or View Mode. (See “Selecting Camera  
Review Pictures to go to your phone’s In Phone folder. (See  
128  
 
Setting the Camera Self-Timer  
To activate the self-timer:  
1. From camera mode, select Options (  
).  
2. Highlight Self Timer and press  
3. Highlight the length of delay you want the timer to use  
(5 Seconds or 10 Seconds) and press  
4. Press when you are ready to start the timer. (It is  
.
.
displayed in the upper right portion of the main LCD  
during the self-timer countdown.)  
5. Get ready for the picture. (When the timer is started,  
the phone will begin to beep and the timer numbers  
turn red when there is only three seconds left.)  
To cancel the self-timer after it has started:  
Press  
.
Using the Zoom  
This feature allows you to zoom in on an object when you  
take a picture. Depending on your resolution settings, you  
can adjust the zoom up to four levels.  
To use the zoom:  
1. From camera mode, press the navigation key left  
or right.  
2. Press  
to take the picture. (The picture will  
automatically be saved in the In Phone folder.)  
129  
Selecting Camera Settings  
To select your camera settings:  
1. From camera mode, select Options (  
)> Settings .  
2. Select one of the following options and press  
.
Resolution to select a picture’s file size (High:  
640x480, Med: 320x240, or Low: 224x168).  
Quality to select the picture quality setting (Fine,  
Normal, or Economy).  
Shutter Sound to select a shutter sound (Shutter 1-6,  
Say Cheese, or Off).  
Auto Erase to select whether pictures remain in the  
camera (Off), or are erased (On), after uploading  
them.  
View Mode to select between Wide Screen or  
Full Screen format.  
Viewing Your Camera’s Status Area Display  
Zoom Level  
Menu Bar  
Images Saved/  
Remaining  
Display  
Image  
Camera  
Options  
Capture  
130  
   
Storing Pictures  
Your phone’s picture storage area is called My Albums. There  
are two types of folders that can be used separately according  
to your needs:  
In Phone  
Online Albums  
In Phone Folder  
Once a picture is taken, it is automatically saved to the  
In Camera folder. From the In Phone folder, you can view all  
the pictures you have taken, store selected images in your  
phone, send pictures to the Sprint PCS Picture Mail Web site  
(www.sprint.com/picturemail), delete images, and access  
additional picture options.  
To review your stored pictures in the In Camera folder:  
1. Select Menu > Pictures > My Pictures > In Camera.  
2. Use your navigation key to view and scroll through the  
pictures.  
131  
     
In Phone Folder Options  
When you are viewing the In Phone folder, press Options (  
)
to display the following options:  
Upload to upload pictures from the In Phone folder to the  
Sprint PCS Picture Mail Web site (www.sprint.com/  
picturemail). Depending on your settings, you may be  
prompted to accept a Sprint PCS Vision connection.  
If this is the first time you have accessed the Sprint PCS  
Picture Mail account, you will be prompted to create  
your Sprint PCS Picture Mail password. See “Creating Your  
Note:  
Assign to assign the current image as a Picture ID, Screen  
Saver, or Incoming Call.  
Save To Phone to save images from the In Camera folder  
into the phone memory for use in assigning images to  
contacts, screen savers, etc.  
Edit Caption to edit the title associated with the image.  
Erase to erase the image or selected images.  
Picture Info to display the list of albums saved in your  
phone.  
Camera Mode to switch back to the camera mode.  
Expand to enlarge the image so that it displays on the  
entire screen.  
Postcard to save handwritten text across the original  
image.  
132  
 
Sending Sprint PCS Picture Mail  
Once you’ve taken a picture, you can use the messaging  
capabilities of your phone to instantly share your picture with  
family and friends. You can send a picture to up to 10 people  
at a time using their email addresses or their wireless phone  
numbers.  
Sending Pictures From the In Phone Folder  
To send pictures from the In Phone folder:  
1. Press Menu > Pictures > My Pictures > In Camera.  
2. Highlight a picture you wish to send and press  
. (The  
check box on the upper left corner will be marked. You  
can select multiple pictures.)  
3. Select Send Msg (  
4. Select Phone #, Email, Contacts, or Other SVC. and  
press  
).  
.
The first time you send Sprint PCS Picture Mail, you will be  
prompted to establish a Sprint PCS Picture Mail Web site  
Note:  
5. Select a contact, or enter a wireless phone number or an  
email address using the keypad, and select OK ( ).  
6. Enter additional recipients or select Next (  
) to  
continue.  
133  
     
7. If you wish to include a subject, scroll to Subject and  
select Add ( ). Enter your subject using the keypad  
and select Save ( ) to save and exit.  
8. If you wish to include a text message, scroll to Text and  
select Add ( ). Enter your message using your keypad  
(or press Options [ ] to select from Preset Msg or  
Recent Msg) and choose Select (  
) to save and exit.  
9. If you wish to include an audio message with the  
picture, highlight the box next to Audio and select  
Record (  
). Press  
to start recording. (Maximum  
recording time is 10 seconds.)  
10. Confirm the recipients, message, audio message, and  
picture.  
To change a recipient, highlight the recipient, press  
the appropriate softkey, and follow the instructions  
in step 5 to select or edit the recipient.  
To change the text message, scroll to Text and press  
the appropriate softkey.  
To change the voice memo, highlight the box next to  
Audio and press the appropriate softkey.  
To change the attached picture(s), select the  
thumbnail picture, press the right softkey and  
press Next (  
).  
11. Press  
to send the picture.  
134  
Sending Pictures From Messaging  
You can also send Sprint PCS Picture Mail from your phone’s  
Messaging menu.  
To send pictures from the Messaging menu:  
1. Select Menu > Messaging > Send Message > Picture Mail >  
In Camera.  
2. Highlight a picture you wish to send and press  
. (The  
check box on the upper left corner will be marked. You  
can select multiple pictures.)  
3. Select Next (  
).  
4. Select a contact, or enter a wireless phone number or  
enter an email address using the keypad, and  
select OK (  
).  
5. Enter additional recipients or select Next (  
) to  
continue.  
6. Select Send (  
) to continue.  
135  
To take and send a new picture from Messaging, select New  
Picture during step 1 above, take the new picture, press Next  
(right softkey), and follow steps 5-11 in “Sending Pictures  
Tip:  
Managing Sprint PCS Picture Mail  
Using the Sprint PCS Picture Mail Web Site  
Once you have uploaded pictures from your phone to your  
online Sprint PCS Picture Mail account at www.sprint.com/  
can use your personal computer to manage your pictures.  
From the Sprint PCS Picture Mail Web site (www.sprint.com/  
picturemail) you can share pictures, edit album titles, add  
captions, and organize images. You can even send your  
pictures to be printed at participating retail locations.  
You will also have access to picture management tools to  
improve and customize your pictures. You'll be able to  
lighten, darken, crop, add antique effects, add comic bubbles  
and cartoon effects, and use other features to transform your  
pictures.  
To access the Sprint PCS Picture Mail Web site:  
1. From your computer’s Internet connection, go to  
www.sprint.com/picturemail.  
2. Enter your wireless phone number and Sprint PCS  
Picture Mail password to register. (See “Creating Your  
136  
     
Managing Online Pictures From Your Phone  
You can use your phone to manage, edit, or share pictures you  
have uploaded to the Sprint PCS Picture Mail Web site at  
page 132 for information about uploading.)  
To view your online pictures from your phone:  
1. Select Menu > Pictures > Online Albums.  
2. Highlight View Albums and press  
. (Depending on  
your settings, you may be prompted to accept a Sprint  
PCS Vision connection).  
3. The Uploads folder and your albums appear. Highlight  
an album title and press  
to display the album.  
(Thumbnail pictures, up to four per screen, are  
displayed.)  
To expand a selected picture from thumbnail to full-screen,  
select Expand (left softkey).  
Tip:  
4. Use your navigation key to select a picture.  
5. Press Options (  
) to display your online picture  
options.  
137  
 
Uploading Pictures  
To upload pictures:  
1. Press Menu > Pictures > My Pictures > In Camera  
(Thumbnail pictures will be displayed.)  
2. Select the picture(s) you wish to upload and press  
Options (  
3. Select Upload and choose Upload Selection/Upload All  
and press  
4. Select My Uploads or Other Album and press  
).  
.
.
5. Highlight an album and press  
to start uploading.  
Downloading Your Online Pictures  
From your online Sprint PCS Picture Mail albums display at  
www.sprint.com/picturemail, you can select pictures to download  
to your phone’s Saved to Phone folder.  
To download pictures from the Sprint PCS Picture Mail  
Web site:  
1. From the online pictures display, select the picture you  
wish to download and press Options (  
2. Highlight Assign and press  
.
3. Select one of the following options and press  
.
Picture ID to download and assign the selected  
picture as a Picture ID.  
Screen Saver to download and assign the selected  
picture as a screen saver.  
138  
   
Incoming Call to download a picture and assign to  
incoming calls with or without caller ID.  
Accessing Online Picture Options From Your Phone  
1. Select a picture from your online Picture Mail. (See  
2. Select Options (  
3. To select an option, highlight it and press  
Copy/Move to copy or move pictures to a selected  
) to display options.  
.
album:  
 Copy Selection to copy the selected picture to the  
album.  
 Copy All to copy all pictures in the current album  
(or Inbox) to the target album.  
 Move Selection to move the selected picture to the  
album.  
 Move All to move all pictures in the current album  
(or Inbox) to the target album.  
Save to Phone to copy the selected picture to the  
Edit Caption to modify the caption name of the  
image.  
Erase to select Erase This or Erase All to erase a single  
picture or all pictures saved in the current album (or  
Inbox).  
Picture Info to display information about the image.  
Expand (left softkey) to expand the selected picture.  
139  
To access your online Albums options from your phone:  
1. Display the album list in the Online Sprint PCS Picture  
2. Use your navigation key to select an album (or Inbox).  
3. Select Options (  
) to display options.  
4. To select an option, highlight it and press  
.
New Album to create a new album. Enter a new  
album name and select Save ( ).  
Album Info to display the details about the album.  
Order Prints  
This menu allows you to order prints from third party vendors  
by uploading images saved on your phone. Images saved at  
the highest quality and resolution settings produce the best  
prints.  
To access order prints:  
1. Select Menu > Pictures > Order Prints.  
2. Select Print by Mail and press  
.
3. Follow the onscreen instructions.  
140  
 
Settings and Info  
This menu allows you to configure where pictures are saved,  
view your account information, or set the view between  
portrait or landscape mode.  
To access the settings and info menu:  
1. Select Menu > Pictures > Settings and Info.  
2. Select one of the following options and press  
.
Account Info to display your current Sprint account  
settings via an online connection.  
View Mode to select a picture view mode of portrait  
or landscape when viewing pictures in the In Phone  
folder.  
141  
   
142  
Section 2J  
Using Sprint PCS Ready Link  
In This Section  
Getting Started With Sprint PCS Ready Link  
Making and Receiving a Sprint PCS Ready Link Call  
Adding and Editing Ready Link Contacts  
Erasing Ready Link List Entries  
Updating Your Sprint PCS Ready Link Lists  
Managing Sprint PCS Ready Link Settings  
Your phone gives you the ability to quickly connect with other  
Sprint PCS Ready Link users for “walkie-talkie–style”  
communication from anywhere, to anywhere, on the Nationwide  
Sprint PCS Network.  
This section explains the features and options of your phone  
and service.  
Section 2J: Using Sprint PCS Ready Link  
143  
         
Getting Started With Sprint PCS Ready Link  
Sprint PCS Ready Link allows you to enjoy quick, two-way,  
“walkie-talkie–style” communication with your friends,  
family, and coworkers. You can make one-to-one or  
one-to-many calls (up to five others on the same call) to  
any other Sprint PCS Ready Link user, anywhere on the  
Nationwide Sprint PCS Network. You can make and receive  
Sprint PCS Ready Link calls when your phone displays the  
Ready Link icon.  
Setting Sprint PCS Ready Link Mode  
To enable or disable Sprint PCS Ready Link mode:  
1. Select Menu > Settings > Ready Link > Enable/Disable >  
Enable.  
Enable: Lets you make or receive Sprint PCS Ready  
Link calls any time your phone is not in use.  
Disable: Disables your phone's Sprint PCS Ready Link  
service; you will not be able to make or receive  
Sprint PCS Ready Link calls or access your Ready Link  
contacts.  
If you haven’t signed up for the Sprint PCS Ready Link service  
and Sprint PCS Ready Link mode is set to Disable, or the Sprint  
PCS Ready Link service is locked, you can use the Ready Link  
button in standby mode.  
Tip:  
144  
Section 2J: Using Sprint PCS Ready Link  
     
Preparing Your Phone for Sprint PCS  
Ready Link Service  
Every time you turn on your phone, it will identify itself and  
make itself available to the Ready Link network.  
When you turn on your phone in an area where  
Sprint PCS Ready Link service is available, it will display  
“Preparing...Please wait.” (When the Ready Link icon  
appears on the display, your phone is ready to make and  
receive Sprint PCS Ready Link calls.)  
Ready Link Call Alerts  
There are several ways your phone alerts you during  
Sprint PCS Ready Link calls.  
When you make or receive a Sprint PCS Ready Link call:  
The phone sounds (depending on the Ringer Type and  
Ringer Volume setting).  
The backlight illuminates.  
The screen displays a Sprint PCS Ready Link call message.  
The other party's Sprint PCS Ready Link number and name  
(if available) are displayed.  
The screen displays who has the floor.  
Main LCD Display during a Ready Link Call  
Section 2J: Using Sprint PCS Ready Link  
145  
Making and Receiving a Sprint PCS  
Ready Link Call  
Displaying the Sprint PCS Ready Link List  
From standby mode, press R-Link (  
) or the Ready Link  
) to access the  
button on the side of your phone (  
Sprint PCS Ready Link List.  
The first time you access the list, the Sprint PCS Ready Link  
Help message will appear. Press Yes (left softkey) and Next  
(left softkey) to read a brief introduction to Sprint PCS  
Ready Link.  
Tip:  
146  
Section 2J: Using Sprint PCS Ready Link  
 
Selecting a Contacts List  
When your phone displays a Sprint PCS Ready Link List, the  
left softkey is labeled Go to. To switch to another contact list,  
press Go to (  
press  
), highlight your desired list, and  
.
Enter R-Link# to enter a ready link number.  
Company List/Company Grps.contain your company Ready  
Link contact names and numbers, separately or in groups.  
You can create and edit your own company List. Your  
phone can store a total of 200 entries. (You may include  
up to five contacts per group.)  
Personal List/Personal Grps. contain your personal Ready  
Link contact names and numbers, separately or in groups.  
You can create and edit your own Personal List. Your  
phone can store a total of 200 entries. (You may include  
up to five contacts per group.)  
Missed shows the last 10 Sprint PCS Ready Link calls you missed.  
Outgoing shows the last 10 different Sprint PCS Ready Link  
calls you placed.  
Incoming shows the last 10 different Sprint PCS Ready Link  
calls you accepted.  
The icon next to the group name indicates a group.  
Note:  
Making a Sprint PCS Ready Link Call  
(One-to-One Call)  
You can place a one-to-one Sprint PCS Ready Link call by  
entering a Sprint PCS Ready Link number or by selecting a  
contact from the Sprint PCS Ready Link List.  
Section 2J: Using Sprint PCS Ready Link  
147  
 
To place a Sprint PCS Ready Link call by selecting a contact:  
1. Press R-Link or press  
.
2. Select Go To (  
), and then select the list from which  
you want to place a call (Enter R-Link#, Company Groups  
[if registered], Personal List, Personal Groups, Missed Calls,  
Outgoing Calls, or Incoming Calls) and press  
.
You can also select Enter R-Link# from the Go to option to enter  
a Sprint PCS Ready Link number directly. (See page 150 for  
details.)  
Tip:  
3. Scroll to the contact you want to call, and press and hold  
to place the call and get the floor. (You will see  
“R-Link calling...” and “Connecting...” followed by “You  
have floor.” You can now begin speaking.)  
- or -  
Scroll to the contact you want to call and press and release  
to place the call. (The call will connect as described  
above, but “Floor is open.” will appear on the screen and  
either you or your contact may press and hold  
the floor and speak.  
to take  
During a Sprint PCS Ready Link call, the “floor” is the right to  
speak. When you see “Floor is open,” the first person to press  
the Ready Link/Memo button can speak (while holding the  
button). Only the person who has the floor can speak. The  
phone beeps if you press the Ready Link button when another  
contact has the floor.  
Note:  
4. Continue holding  
finished speaking, release  
as you speak. (When you have  
to allow the other  
contact to speak. When the other party takes the floor,  
148  
Section 2J: Using Sprint PCS Ready Link  
you will see the speaker’s name and phone number and  
the text “has floor.”)  
5. When you are finished, press  
.
When neither party has the floor during a Sprint PCS Ready  
Link call, “Floor is open” appears on the display. If no one takes  
the floor for 20 seconds, the Sprint PCS Ready Link call ends  
automatically.  
Note:  
If you press Talk or Speaker during step 3 above, you can make  
a standard voice call.  
Tip:  
Making a Sprint PCS Ready Link Call (Group Call)  
You can make a Sprint PCS Ready Link call to all members in a  
Group entry that you have in your Sprint PCS Ready Link List.  
You can communicate with up to five members at a time.  
To place a Sprint PCS Ready Link Group call:  
1. Press R-Link or press  
.
2. Select Go To (  
you want to make a call (Personal Groups, Outgoing Calls,  
Incoming Calls, or Missed Calls) and press  
) and then select the list from which  
.
3. Scroll to the group you want to call, and press and hold  
to place the call and take the floor. (You will see  
“R-Link calling...” and “Connecting...” followed by “You  
have floor.” Continue with the Sprint PCS Ready Link call  
as described on the previous page.)  
To make a Sprint PCS Ready Link call to a group  
member, select your desired group, highlight the  
desired group member, and press and hold  
.
Section 2J: Using Sprint PCS Ready Link  
149  
If one of the group members takes the floor, you will  
see the member's name and Sprint PCS Ready Link  
number on the display.  
4. When the call is finished, press  
.
The phone beeps if you press the Ready Link button when  
another contact has the floor.  
Tip:  
You can also make a Group Call after checking the group  
member. Press Menu/OK to display group members,  
highlight <Call Group> and press and hold the Ready Link  
button during step 3 above.  
To redial your last Sprint PCS Ready Link call, highlight  
Redial and press and hold the Ready Link button from the  
Sprint PCS Ready Link List.  
Making a Sprint PCS Ready Link Call by Entering a  
Number  
To place a Sprint PCS Ready Link call by entering a number:  
1. From standby mode, enter the Sprint PCS Ready Link  
number you want to dial.  
2. Press  
to place the Sprint PCS Ready Link call.  
Continue holding  
.
The contact's name appears on the display if there is  
a matched number in your Sprint PCS Ready Link  
List.  
3. Continue with the Sprint PCS Ready Link call while  
pressing and holding  
4. When the call is finished, press  
- or -  
.
150  
Section 2J: Using Sprint PCS Ready Link  
 
1. Press R-Link or press  
.
2. Select Go To ( ) > Enter R-Link# and press  
.
3. Enter the Ready Link number you want to dial.  
4. Follow steps 2-4 above.  
Sprint PCS Ready Link numbers must contain 10 digits (area  
code + phone number). Your Sprint PCS Ready Link number is  
the same as your phone number.  
Note:  
Missed Call Notification for Sprint PCS  
Ready Link Calls  
When an incoming Sprint PCS Ready Link call is not answered,  
the Missed Call Notification is displayed onscreen.  
To call the last Missed Sprint PCS Ready Link call:  
Simply press and hold  
while the Missed Call  
Notification is displayed. (Continue with the Sprint PCS  
Ready Link call as described previously.)  
If you have two or more missed calls, the call log list will  
appear. Different icons will be displayed when you have  
different types of notifications.  
Tip:  
To erase the Missed Call log:  
Press Dismiss (  
).  
If you press End before checking your notification, Events  
(right softkey) appears in standby mode. Press Events (right  
softkey) to display the notification list.  
Tip:  
Section 2J: Using Sprint PCS Ready Link  
151  
When you display Missed Call entries, you will see an icon  
next to the name. The icon will remain until you make or  
receive a Sprint PCS Ready Link call to or from the entry.  
Another icon appears next to the new missed call entry.  
Note:  
Receiving a Sprint PCS Ready Link Call  
To receive a Sprint PCS Ready Link call:  
1. Make sure your phone's Sprint PCS Ready Link mode is  
2. When you receive a Sprint PCS Ready Link call from a  
contact, “R-Link Call,” the contact's name, and the Sprint  
PCS Ready Link number appear on the display. (You do  
not need to take any action to answer the call.)  
When you receive a group call, “Group Call,” the  
group member's name, and the Sprint PCS Ready  
Link number appear.  
3. If the person placing the call has kept the floor (held the  
Ready Link/Memo button), you will see the contact’s  
name and Sprint PCS Ready Link number along with  
“has floor,” and you will hear the caller speaking.  
4. When the caller finishes speaking and releases  
you will see “Floor is open.” on the display screen. Press  
and hold  
to take the floor and reply to the caller.  
,
(You will see “You have floor” and hear a tone  
confirming that you may speak.)  
5. When the conversation is finished, press  
.
You can also receive a Sprint PCS Ready Link call with the flip  
closed. Press and hold the Ready Link button to take the floor  
when the floor is open.  
Tip:  
152  
Section 2J: Using Sprint PCS Ready Link  
 
You can change the volume and the speaker setting while a  
Sprint PCS Ready Link call is activated. Volume: Adjust the  
voice volume by using the Side Volume key or by pressing the  
navigation key up or down except when you are pressing and  
holding the Ready Link button. Speaker: Switch the speaker on  
or off by pressing the Speaker button.  
Note:  
Sprint PCS Ready Link Options  
When you use Sprint PCS Ready Link, several user options are  
available by pressing Options (  
highlight it and press  
). To select an option,  
.
Copy to Contacts to copy a contact to the Personal List.  
Copy Group appears when you highlight a group. (This  
option doesn't appear if the entry is already in the  
Personal List or when you select Personal List/Personal  
Groups.)  
Edit to edit a Sprint PCS Ready Link number and/or name.  
Erase to erase a contact. Erase Group appears when you  
highlight a group.  
New Contact to add a new contact. Add Group appears  
when you highlight a group list. See page 156 for details.  
Erase R-Link List to erase entries saved in the Sprint PCS  
Ready Link List (except Company List/Company Groups).  
Send VoiceSMS to send an SMS voice message.  
Help to see the Sprint PCS Ready Link instruction page.  
Section 2J: Using Sprint PCS Ready Link  
153  
Adding and Editing Ready Link Contacts  
Copying an Entry to Your Personal List or Personal  
Group List  
You can copy an entry to your Personal Lists from several  
different sources. If the selected entry is already stored in the  
Personal Lists, the “copy” option does not appear.  
To copy an entry from the Sprint PCS Ready Link List:  
1. Press R-Link or press  
2. Select Go To ( ), and then select the list from which  
you want to copy an entry (Missed Calls, Outgoing Calls,  
or Incoming Calls) and press  
.
.
3. Select the entry you want to copy (or scroll to highlight  
the Redial entry at the top of your screen) and press  
Options (  
). To select an option, highlight it and  
press  
.
Copy to copy the contact to the  
Personal List.  
4. Select Yes to copy and save the entry to your  
Personal List.  
Your Company Lists can be set up and edited only by an  
administrator on the Sprint PCS Ready Link server. You cannot  
add or edit contacts/groups to your Company Lists.  
Note:  
154  
Section 2J: Using Sprint PCS Ready Link  
   
Saving a Sprint PCS Ready Link Number  
When you have finished a Sprint PCS Ready Link call, you will  
see the Sprint PCS Ready Link number and the text “R-Link call  
ended.” on the display. You can save a Sprint PCS Ready Link  
number from the ending display to your Personal Lists.  
To save the number:  
From the end display, press Options (  
If the entry has no name, you are prompted to enter  
a name.  
)> Save.  
If the number is already stored in the Personal List or Personal  
Groups, the “Save” softkey does not appear.  
Note:  
Finding an Entry in the Sprint PCS Ready Link List  
You can find an entry by entering a few letters.  
To find a Sprint PCS Ready Link entry:  
1. Press R-Link or press  
.
2. Select Go To (  
), and then select a list (Personal List or  
Personal Groups).  
3. Enter the first letter or the first few letters of the name.  
The display shows the list beginning with the  
letter(s) you entered.  
4. Scroll through the list and press  
to select the  
desired entry.  
Section 2J: Using Sprint PCS Ready Link  
155  
Adding a New Contact to Your Personal List  
You can store a total of 200 entries in the Personal Lists.  
To add a new Sprint PCS Ready Link contact:  
1. Press R-Link or press  
.
2. Select Go To ( ) > Personal List and press  
.
3. Select <New Contact> and press  
- or -  
.
Select a contact, press Options (  
), and then highlight  
New Contact and press  
.
4. Enter a name for the new contact and press  
. (This is  
the name you will see when calling or receiving a call  
from the contact.)  
5. Select R-Link Number, enter the contact's 10-digit Sprint  
PCS Ready Link number (the contact's wireless phone  
number) and press  
.
6. Press Done (  
) to save the new contact to your  
Personal List.  
Tip: You are not allowed to use the following symbols during  
step 4: @ : ; / * } {  
Tip:  
156  
Section 2J: Using Sprint PCS Ready Link  
 
Adding a New Group to Your Personal Group List  
You can add new groups to the Personal Group List. Each  
group can include up to five members. You can enter a group  
member directly or select the member from the Company List  
or Personal List.  
To add a new Sprint PCS Ready Link group entry:  
1. Press R-Link or press  
.
2. Select Go To ( ) > Personal Groups.  
3. Select <New Group> and press  
.
- or -  
Select an entry, press Options (  
), and then highlight  
New Group and press  
.
4. Enter a Group Name, press  
, and press Next (  
).  
.
5. To add contacts to the group, press Add (  
).  
6. Highlight one item from the following and press  
New to add a new contact. See the previous page for  
details.  
From Company to add a contact from your Company  
List (if applicable).  
From Personal to add a contact from your Personal  
List.  
7. Scroll to the contacts you want to add and press  
Pick ( ) to include the entries.  
or  
Section 2J: Using Sprint PCS Ready Link  
157  
8. Press Done (  
) when you have finished selecting  
) to update your  
contacts, and then press Update (  
Personal Group List with the new group entry.  
You can also add members directly. From step 5 above,  
highlight <Add Members> and press OK. Enter the new  
members’s name and R-Link number and press Save (left  
softkey) to save the entry.  
Tip:  
Editing a Contact in Your Personal List  
To edit a Personal List contact:  
1. Press R-Link or press  
.
2. Select Go To (  
3. Scroll to the entry you want to edit and press  
Options ( ).  
) > Personal List.  
Copy to Contacts to transfer the Ready Link entry to  
your Contacts.  
Edit to edit the selected contact.  
Erase to erase the selected contact.  
New Contact to add a new contact.  
Erase R-Link List to erase the Sprint PCS Ready Link  
Send VoiceSMS to send an SMS voice message.  
Help to view the Sprint PCS Ready Link instruction  
page.  
4. Highlight Edit and press  
.
5. Select the field you want to edit (Name or R-Link  
Number) and press  
.
158  
Section 2J: Using Sprint PCS Ready Link  
 
6. Edit the entry, press Done (  
), and press Save (  
) to  
save your changes.  
Editing a Group in Your Personal Group List  
To edit a group name:  
1. Press R-Link or press  
.
2. Select Go To (  
3. Scroll to the group entry you want to edit and press  
Options ( ).  
) > Personal Groups.  
Edit to edit the selected group.  
Erase Group to erase the selected group.  
New Group to add a new group.  
Erase R-Link List to erase the Sprint PCS Ready Link  
List. See page 161 for details.  
Help to view the Sprint PCS Ready Link instruction  
page.  
4. Highlight Edit and press  
5. Edit the group name and press  
then press Next ( ).  
.
or Done (  
), and  
If you don’t need to edit the group name, press Next (left  
softkey) during step 5 above and skip step 6.  
Tip:  
6. Press Done (  
7. To edit a group member, scroll to the contact you want  
to edit and press Options ( ).  
) to save your changes.  
Section 2J: Using Sprint PCS Ready Link  
159  
Edit to edit a group member's name and phone  
number.  
Erase to erase the group member.  
Add New to add a new group member.  
Add (Company) to add a new group member from  
the Company List (if applicable).  
Add (Personal) to add a new group member from the  
Personal List.  
Details to display a group member's information.  
8. Highlight Edit and press  
9. Select the field you want to edit (Name or R-Link  
Number) and press  
.
.
10. Edit the entry, press Done (  
), and press Save (  
) to  
save your changes.  
11. Press Update (  
) to update your Personal Group List.  
160  
Section 2J: Using Sprint PCS Ready Link  
Erasing Ready Link List Entries  
Erasing an Entry in Your Personal Lists  
To erase a contact or a group:  
1. From the Sprint PCS Ready Link List, select Go To (  
),  
and then select Personal List or Personal Groups and press  
.
2. Scroll to the entry you want to erase and select Options  
(
) > Erase.  
Erase Group appears when you select Personal  
Groups.  
3. Select Yes and press  
.
To erase a group member:  
1. From the Sprint PCS Ready Link List, select Go To (  
) >  
Personal Groups.  
2. Scroll to the desired group and press  
to display the  
group members.  
3. Select the contact you want to erase and select Options  
) > Erase > Yes to update your Personal Group List.  
(
Section 2J: Using Sprint PCS Ready Link  
161  
   
Erasing a Sprint PCS Ready Link List  
You can erase all entries saved in the Sprint PCS Ready Link  
List (except Company List/Company Groups.).  
To erase a Sprint PCS Ready Link List:  
1. From the Sprint PCS Ready Link List, select Options (  
)
> Erase R-Link List.  
2. Select the desired option and press  
.
Outgoing Calls to erase all outgoing Sprint PCS Ready  
Link calls.  
Incoming Calls to erase all incoming Sprint PCS Ready  
Link calls.  
Missed Calls to erase all missed Sprint PCS Ready Link  
calls.  
All Calls to erase all Sprint PCS Ready Link call history,  
except redial.  
All Personal Entries to erase all entries in Personal List  
and Personal Grps. You are prompted to enter your  
four-digit lock code.  
3. Select Yes.  
Redial numbers will not be erased.  
Tip:  
Updating Sprint PCS Ready Link Lists  
Updating the Company List and Personal List  
To update your Company List and Personal List manually through  
the Sprint PCS Ready Link server:  
Select Menu (  
) > Settings > Ready Link > List Update.  
162  
Section 2J: Using Sprint PCS Ready Link  
     
Managing Sprint PCS Ready Link Settings  
Restarting the Ready Link Service  
To restart the Sprint PCS Ready Link service:  
Select Menu (  
) > Settings > Ready Link >  
Restart Ready Link.  
Setting Ready Link Guard  
This feature enables you to display a warning message when  
you cannot receive Sprint PCS Ready Link calls. The warning  
message will appear when you are launching a Web or Java  
application or sending or uploading your pictures.  
To set the Ready Link Guard:  
1. Select Menu (  
) > Settings > Ready Link >  
R-Link Guard.  
2. Select On. (Select Off to deactivate this feature.)  
Setting Ringer Types for Sprint PCS Ready Link Calls  
Your phone provides a variety of ringer types that allow you  
to customize your ringer and volume settings.  
To select a ringer type for Sprint PCS Ready Link calls:  
1. Select Menu (  
) > Settings > Ready Link > Sounds >  
Tones.  
2. Select the desired ringer type.  
To hear the selected ringer, press Play (  
).  
Section 2J: Using Sprint PCS Ready Link  
163  
   
Setting an Alert Notification for Sprint PCS  
Ready Link Calls  
Your phone can alert you with an audible tone when you  
receive a Sprint PCS Ready Link call.  
To set alerts for Sprint PCS Ready Link calls:  
1. Select Menu (  
) > Settings > Ready Link > Sounds >  
Missed Call Alert.  
2. Select Ready Link Calls or R-Link Missed.  
3. Select Once, Repeat, or Continuous. (Select Off to  
deactivate the alert.)  
You can also set alerts using the Alert Notification menu. (See  
Tip:  
Setting the Speakerphone for Sprint PCS  
Ready Link Calls  
You can set the speakerphone to on or off when Sprint PCS  
Ready Link call is activated. By default, the speakerphone is  
set to on.  
To set the speakerphone to on or off:  
1. Select Menu (  
) > Settings > Ready Link >  
Speakerphone.  
2. Select On or Off.  
If the phone’s ringer volume is set to Vibrate, Ringer Off, or  
Silence All, the speakerphone turns off. Press Speaker to turn  
the speakerphone mode on.  
Note:  
164  
Section 2J: Using Sprint PCS Ready Link  
Setting the Default View of the Sprint PCS  
Ready Link List  
You can select the default Sprint PCS Ready Link list when  
Sprint PCS Ready Link is launched.  
To select the default view of the Sprint PCS Ready Link List:  
1. Select Menu (  
) > Settings > Ready Link > Default View.  
(The default setting is Personal List.)  
2. Select the desired list.  
Section 2J: Using Sprint PCS Ready Link  
165  
 
166  
Section 2K  
Using Bluetooth® Wireless Technology  
In This Section  
Your phone features built-in Bluetooth wireless technology,  
allowing you to share information more easily than ever before.  
Bluetooth is a short-range communications technology that  
allows you to connect wirelessly to a number of Bluetooth-  
enabled devices, such as headsets, hands-free car kits,  
handhelds, PCS and wireless phones. The Bluetooth  
communication range is usually up to approximately 10  
meters (30 feet).  
This section details how to set up and make the most of your  
phone’s Bluetooth capabilities.  
167  
   
Turning Bluetooth On and Off  
By default, your device’s Bluetooth functionality is  
turned off. Turning Bluetooth on makes your device  
“discoverable” by other in-range Bluetooth devices.  
To turn Bluetooth on:  
1. Select Menu > Settings > Bluetooth> Enable.  
2. Press the navigation key up or down to select On and  
press  
to enable Bluetooth.  
To turn Bluetooth off:  
1. Select Menu > Settings > Bluetooth> Enable.  
2. Press the navigation key up or down to select Off and  
press  
to disable Bluetooth.  
Bluetooth Status Indicators  
The following icons show your Bluetooth connection status  
at a glance:  
Bluetooth is active.  
Bluetooth is connected to a device or  
transferring data.  
168  
 
Using the Bluetooth Settings Menu  
The Bluetooth Settings menu allows you to set up many of the  
characteristics of your phone’s Bluetooth service, including:  
Entering or changing the name your phone uses for  
Bluetooth communication.  
Setting your phone’s visibility (or “discoverability”) for  
other Bluetooth devices.  
Displaying your phone’s Bluetooth address.  
To access the Bluetooth Settings menu:  
1. Select Menu > Settings > Bluetooth.  
2. Use the navigation key to select Enable, Visibility,  
Device name, or Device Info, and press  
.
Bluetooth Settings: My Bluetooth Name  
The My Bluetooth Name section of the Bluetooth Settings  
menu allows you to select a Bluetooth name for your phone.  
Your phone’s Bluetooth name will appear to other in-range  
Bluetooth devices, depending on your visibility settings.  
To set a Bluetooth name for your phone:  
1. Select Menu > Settings > Bluetooth > Device name.  
2. Press and hold  
3. Use your keypad to enter a new name and press Done  
) to save and exit.  
to clear the current name.  
(
169  
 
Bluetooth Settings: Visibility  
The Visibility section of the Bluetooth Settings menu allows  
you to manage your phone’s availability to other Bluetooth  
devices.  
To configure your phone’s visibility (discoverability) to other  
Bluetooth devices:  
1. Select Menu > Settings > Bluetooth > Visibility.  
2. Select your desired visibility setting and press  
:
Always visible to allow other Bluetooth devices to  
detect and identify your phone.  
Visible for 3min to allow other devices three minutes  
to detect your phone before changing your status to  
hidden.  
Hidden to prevent other Bluetooth devices from  
detecting and identifying your phone.  
Any changes you make to your Bluetooth settings will be  
saved when you exit the Bluetooth Settings menu. Any  
setting changes will apply to all devices in the same category.  
Note:  
Bluetooth Settings: My Bluetooth Address  
To display your phone’s Bluetooth address:  
Select Menu > Settings > Bluetooth > Device Info.  
170  
Bluetooth Profiles  
All the Bluetooth settings you configure are stored in your  
phone’s Bluetooth user profile. Different profiles can be used  
for specific Bluetooth functions.  
Headset Profile – Bluetooth technology connects the  
phone to a wireless Bluetooth-enabled headset. When an  
incoming call is received, the ringer can be heard through  
the headset, instead of the phone. The call can then be  
received by pushing a button. Increase or decrease the  
volume by using the headset.  
Hands-Free Profile – Bluetooth technology connects the  
phone to a wireless Bluetooth-enabled car kit. Incoming  
calls ring to the hands-free headset or device. Calls can be  
received by pressing a button on the headset or device.  
For dialing, four functions are supported: recent call dial,  
voice dial, speed dial, and number dial. Increase or  
decrease the volume by using the headset.  
DUN: Dial-Up Network Profile – Bluetooth technology  
functions as a wireless data cable, connecting a PC or PDA  
to a network through your phone.  
OPP: Object Push Profile – is based on the Generic Object  
Exchange (OBEX) profile which uses predefined object  
formats. The object format is vCard.  
171  
 
Pairing Bluetooth Devices  
Paired Devices  
The Bluetooth pairing process allows you to establish trusted  
connections between your phone and another Bluetooth  
device. When devices are paired, a passkey is shared between  
devices, allowing for fast, secure connections while bypassing  
the discovery and authentication process.  
To pair your phone with another Bluetooth device:  
1. Select Menu > Tools> Bluetooth.  
2. Press Add new (  
), highlight Search, and press  
.
(Your phone will display a list of discovered in-range  
Bluetooth devices.)  
3. Select the device you wish to pair with and press  
for  
Add to List.  
4. Enter the PIN (passkey) and press  
.
The passkey can be any combination of up to 16 numbers.  
Note:  
5. Connection Successful will be displayed if the device is  
connected properly. Enter a new name for the device or  
press  
for Done to keep the default name.  
172  
 
Waiting for Pairing  
If you are going to be using a Dial-Up Network (DUN) profile  
to pair with a PC or PDA, you will need to allow the other  
device to initiate pairing with your phone.  
To allow your phone to be paired with another Bluetooth device:  
1. Select Menu > Tools> Bluetooth > Add New >  
Wait for request.  
2. The visibility pop-up screen is displayed.  
3. Follow the onscreen prompts to enter your passkey and  
press  
.
173  
 
174  
Section 3  
Sprint PCS Service Features  
 
176  
Section 3A  
Sprint PCS Service Features:  
The Basics  
In This Section  
Now that you’ve mastered your phone’s fundamentals,  
it’s time to explore the calling features that enhance your  
Sprint PCS Service. This section outlines your basic Sprint PCS  
Service features.  
177  
   
Using Voicemail  
Setting Up Your Voicemail  
All unanswered calls to your phone are automatically  
transferred to your voicemail, even if your phone is in use or  
turned off. Therefore, you will want to set up your voicemail  
and personal greeting as soon as your phone is activated.  
To set up your voicemail:  
1. Press and hold  
.
2. Follow the system prompts to:  
Create your passcode.  
Record your name announcement.  
Record your greeting.  
Choose whether or not to activate One-Touch  
Message Access (a feature that lets you access  
messages simply by pressing and holding  
,
bypassing the need for you to enter your passcode).  
Voicemail Passcode  
Note:  
If you are concerned about unauthorized access to your  
voicemail account, Sprint recommends you enable your  
voicemail passcode.  
178  
       
Voicemail Notification  
There are several ways your phone alerts you to a new  
message:  
By displaying a message on the screen.  
By sounding the assigned ringer type.  
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts  
you and prompts you to call your voicemail.  
To call your voicemail:  
Press and hold  
.
To display your Missed Log:  
Press the navigation key up.  
When you are roaming off the Nationwide Sprint PCS  
Network, you may not receive notification of new voicemail  
messages. It is recommended that you periodically check your  
voicemail by dialing 1 + area code + your wireless phone  
Note:  
number. When your voicemail answers, press ( ) and enter  
*
your passcode. You will be charged roaming rates when  
accessing voicemail while roaming off the Nationwide  
Sprint PCS Network.  
Your phone accepts messages even when it is turned off.  
However, you are notified of new messages only when your  
phone is turned on and you are in a Sprint PCS Service Area.  
179  
Retrieving Your Voicemail Messages  
You can review your messages directly from your phone or  
from any other touch-tone phone. To dial from your phone,  
you can either speed dial your voicemail or use the menu  
keys.  
Using One-Touch Message Access  
Press and hold  
box.)  
. (Your phone will dial your voicemail  
Using the Menu Keys on Your Phone to Access Your Messages  
1. Select Menu > Messaging > Voicemail > Call Voicemail.  
2. Press  
to listen to your messages.  
You are charged for airtime minutes when you are accessing  
your voicemail from your phone.  
Note:  
Using a Phone Other Than Your Phone to Access Messages  
1. Dial your wireless phone number.  
2. When your voicemail answers, press  
.
3. Enter your passcode.  
When you call into voicemail, you first hear the header  
information (date, time, and sender information) for the  
message. To skip directly to the message, press 4 during the  
header.  
Tip:  
180  
 
Voicemail Button Guide  
Here’s a quick guide to your keypad functions while listening  
to voicemail messages. For further details and menu options,  
Date/Time  
Replay  
Send Reply Advance  
Rewind  
Call Back  
Help  
Forward  
Save  
Erase  
Cancel  
Skip  
Voicemail Options  
Your phone offers several options for organizing and  
accessing your voicemail.  
Using Expert Mode  
Using the Expert Mode setting for your personal voicemail  
box helps you navigate through the voicemail system more  
quickly by shortening the voice prompts you hear at each  
level.  
181  
 
To turn Expert Mode on or off:  
1. Press and hold  
to access your voicemail. (If your  
voicemail box contains any new or saved messages,  
press  
to access the main voicemail menu.)  
2. Press  
to change your Personal Options, following  
the system prompts.  
3. Press  
for Expert Mode.  
4. Press  
to turn Expert Mode on or off.  
Setting Up Group Distribution Lists  
Create up to 20 separate group lists, each with up to 20  
customers.  
1. Press and hold  
to access your voicemail. (If your  
voicemail box contains any new or saved messages,  
press  
to access the main voicemail menu.)  
2. Press  
to change your Personal Options, following  
the system prompts.  
3. Press  
for Administrative Options.  
for Group Distribution Lists.  
4. Press  
5. Follow the voice prompts to create, edit, rename, or  
delete group lists.  
Sprint PCS Callback  
Return a call after listening to a message without  
disconnecting from voicemail.  
Press  
after listening to a message. (Once the call is  
complete, you’re returned to the voicemail main menu.)  
182  
Voicemail-to-Voicemail Message  
Record and send a voice message to other Sprint PCS  
Voicemail users.  
1. From the main voicemail menu, press  
to send a  
message.  
2. Follow the voice prompts to enter the phone number.  
3. Follow the voice prompts to record and send your voice  
message.  
Voicemail-to-Voicemail Message Reply  
Reply to a voice message received from any other Sprint PCS  
Voicemail user.  
1. After listening to a voice message, press  
.
2. Follow the voice prompts to record and send your reply.  
Voicemail-to-Voicemail Message Forwarding  
Forward a voice message, except those marked “Private,” to  
other Sprint PCS Voicemail users.  
1. After listening to a message, press  
and then  
.
2. Follow the voice prompts to enter the phone number.  
3. Follow the voice prompts to record your introduction  
and forward the voice message.  
183  
Voicemail-to-Voicemail Receipt Request  
Receive confirmation that your voice message has been  
listened to when you send, forward, or reply to other  
Sprint PCS users.  
1. Listen to the message and press  
to reply.  
2. After the tone, record your message, press  
to end  
to indicate you are satisfied  
recording and then  
with the message you recorded.  
To rerecord your message, press 3.  
Note:  
3. Press  
4. Press  
to mark receipt requested.  
to send your voicemail message.  
Extended Absence Greeting  
When your phone is turned off or you are off the Nationwide  
Sprint PCS Network for an extended period, this greeting can  
be played instead of your normal personal greeting.  
1. From the main voicemail menu, press  
for Personal  
Options.  
2. Press  
for greetings.  
to record an Extended Absence Greeting.  
3. Press  
Clearing the Message Icon  
Your phone may temporarily continue to display the message  
icon after you have checked your voice and text messages.  
To clear the icon from the display screen:  
1. Select Menu > Messaging > Voicemail > Clear Envelope.  
2. Select Yes or No and press  
.
184  
Voicemail Menu Key  
Following the prompts on the voicemail system, you can use  
your keypad to navigate through the voicemail menu. The  
following list outlines your phone’s voicemail menu structure.  
Listen  
Envelope Information  
Reply  
Advance 8 Seconds  
Replay  
Rewind  
Forward Message  
Erase  
Callback  
Save  
Options  
Send a Message  
Personal Options  
Notification Options  
Phone Notification  
Numeric Paging to a Phone  
Return to Personal Options Menu  
Administrative Options  
Skip Passcode  
Autoplay  
185  
   
Message Date & Time On/Off  
Change Passcode  
Group Distribution List  
Return to Personal Options Menu  
Greetings  
Personal Greetings  
Name Announcement  
Extended Absence Greeting  
Return to Personal Options Menu  
Expert Mode (On/Off)  
Place a Call  
Disconnect  
Using SMS Text Messaging  
With SMS Text Messaging, you can use other people's  
wireless phone numbers to send instant text messages from  
your phone to their messaging-ready phones – and they can  
send messages to you. When you receive a new message, it  
will automatically be displayed on your phone’s screen.  
In addition, SMS Text Messaging includes a variety of preset  
messages, such as “I’m running late, I’m on my way,” that  
make composing messages fast and easy. You can also  
customize your own preset messages (up to 160 characters)  
from your phone or at www.sprint.com.  
186  
     
Composing SMS Text Messages  
To compose an SMS Text message:  
1. Select Menu > Messaging > Send Message > Text Message.  
2. Select Contacts, Mobile #, or Email and press  
.
3. Enter the number or email address, or select the  
contact, and select Next (  
). (You may include up to  
10 recipients per message.)  
4. Compose a message using one of the following  
methods:  
To type a message, use your keypad to enter your  
message. Use to select a character input mode.  
To use a preset message, recent message, or an  
emoticon, select Options ( ) and select Preset Msg,  
Recent Msg, or Emoticons. Press the number on the  
keypad that corresponds to the number next to the  
message or emoticon.  
5. Select Next (  
6. Review your message and press Send (  
also select the following additional messaging options  
by pressing Options ( ):  
Edit to edit the existing message before sending.  
).  
). You may  
Priority to set the message priority level  
[Normal or Urgent].  
Call Back # to set the callback number.  
Save to Drafts to save the message without sending.  
187  
Accessing SMS Text Messages  
To read an SMS Text message:  
When you receive a text message, it will automatically  
appear on your phone’s main display screen. Use your  
navigation key to scroll down and view the entire  
message.  
To reply to an SMS Text message:  
1. While the message is open, select Reply (  
).  
2. Select Picture, Handwr. Msg, VoiceSMS, or Text and  
press  
3. Compose your reply or use the preset messages or icons.  
.
To type a message, use your keypad to enter your  
message. Use to select a character input mode.  
To use a preset message or an emoticon, select  
Options ( ) and select Preset Msg, Recent Msg, or  
Emoticons. Press the number on the keypad that  
corresponds to the number next to the message or  
emoticon.  
4. Select Next (  
5. Review your message and press Send (  
also select the following additional messaging options  
by pressing Options ( ):  
Edit to edit the existing message before sending.  
).  
). You may  
Priority to set the message priority level  
[Normal or Urgent].  
Call Back # to set the callback number.  
Save to Drafts to save the message without sending.  
188  
Using Preset Messages  
Preset messages make sending text messages to your friends,  
family, and coworkers easier than ever.  
To add or edit preset messages:  
1. Select Menu > Messaging > Settings > Preset Messages.  
2. Select Options (  
) and press Add New.  
3. Enter your new message or changes and press Done  
(
You may also add or edit preset messages in the “My Online  
Tools” area at www.sprint.com  
Note:  
Using SMS Voice Messaging  
In addition to sending and receiving SMS Text messages, your  
phone is enabled with SMS Voice Messaging. With SMS Voice  
Messaging, you can quickly and easily send a voice message  
to other SMS-enabled phones or working email addresses  
without making a phone call. Just record a message and send  
it directly to the recipient’s phone messaging inbox.  
Activating SMS Voice Messaging  
To use SMS Voice Messaging capabilities, you will first need  
to register your phone. Once you have registered, incoming  
SMS Voice messages will be automatically downloaded to  
your phone.  
To activate SMS Voice Messages:  
1. When you turn on your phone, you will be prompted to  
register your phone to receive SMS Voice messages.  
2. Select Yes. (When activation is complete, an activation  
confirmation screen appears.)  
189  
       
If you select No during step 2 above, you will see an alert  
message. If you select No after reading the message,  
incoming SMS Voice messages will not be downloaded to  
your phone.  
Note:  
Playing an SMS Voice Message  
To play an SMS Voice message from the main menu:  
1. Select Menu > Messaging > VoiceSMS.  
2. Highlight the message you want to play and press  
.
Composing SMS Voice Messages  
To compose an SMS Voice message:  
1. Select Menu > Messaging > Send Message > Voice SMS.  
2. Select Mobile # or Email to enter a recipient’s wireless  
phone number or email address directly.  
3. Select Contacts.  
4. Select your desired list and press  
to select the  
recipient.  
5. Press Done (  
) when you have finished selecting and  
entering recipients.  
6. Select Next (  
) to continue to the next screen.  
7. Start recording after the beep. (You can record up to  
two minutes.)  
8. To finish recording, press Done (  
).  
9. Press Send ( ) to send the voice message.  
If this is the first time that you are sending an SMS message,  
the “From Name” screen is displayed. Enter the default name  
here for your messages.  
Note:  
190  
Accessing SMS Voice Messages  
To play an SMS Voice message:  
When you receive a voice message, a pop-up  
notification will automatically appear on your phone’s  
main display screen. Use your softkeys to view and play  
the voice message.  
To reply to an SMS Voice message:  
1. From the VoiceSMS inbox, press Reply (  
2. Record your reply and then press Send (  
).  
).  
Using Caller ID  
Caller ID allows people to identify a caller before answering  
the phone by displaying the number of the incoming call. If  
you do not want your number displayed when you make a  
call, just follow these easy steps.  
To block your phone number from being displayed for a specific  
outgoing call:  
1. Press  
2. Enter the number you want to call.  
3. Press  
.
.
To permanently block your number, call Sprint Customer Service.  
191  
     
Responding to Call Waiting  
When you’re on a call, Call Waiting alerts you to incoming  
calls by sounding two beeps. Your phone’s screen informs you  
that another call is coming in and displays the caller’s phone  
number (if it is available).  
To respond to an incoming call while you’re on a call:  
Press  
. (This puts the first caller on hold and answers  
the second call.)  
To switch back to the first caller:  
Press  
again.  
For those calls where you don’t want to be interrupted, you  
can temporarily disable Call Waiting by pressing *70 before  
placing your call. Call Waiting is automatically reactivated  
once you end the call.  
Tip:  
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the  
same time. When using this feature, the normal airtime rates  
will be charged for each of the two calls.  
To make a Three-Way Call:  
1. Enter a number you wish to call and press  
2. Once you have established the connection, enter the  
second number you wish to call and press  
. (This  
.
puts the first caller on hold and dials the second  
number.)  
3. When you’re connected to the second party, press  
again to begin your three-way call.  
192  
         
If one of the people you called hangs up during your call, you  
and the remaining caller stay connected. If you initiated the  
call and are the first to hang up, all other callers are  
disconnected.  
Call Waiting and Three-Way Calling are not available while  
roaming off the Nationwide Sprint PCS Network.  
Note:  
Using Call Forwarding  
Call Forwarding lets you forward all your incoming calls to  
another phone number – even when your phone is turned off.  
You can continue to make calls from your phone when Call  
Forwarding is activated.  
To activate Call Forwarding:  
1. Press  
.
2. Enter the area code and phone number to which your  
future calls should be forwarded.  
3. Press  
. (You will see a message and hear a tone to  
confirm the activation of Call Forwarding.)  
To deactivate Call Forwarding:  
1. Press  
.
2. Press  
. (You will see a message and hear a tone to  
confirm the deactivation.)  
You are charged a higher rate for calls you have forwarded.  
Note:  
193  
   
194  
Section 3B  
Sprint PCS Vision  
In This Section  
Sprint PCS Vision offers easy and amazing data services you  
will really use. These features – including messaging, games,  
downloadable ringers and screen savers, and portable Web  
access – let you have fun, stay in touch, and stay informed no  
matter where you go on the Nationwide Sprint PCS Network.  
This section introduces these advanced services and walks  
you through the necessary steps to start taking advantage of  
Sprint PCS Vision Services.  
Section 3B: Sprint PCS Vision  
195  
       
Sprint PCS Vision Applications  
Here is a brief list of the applications available through your  
phone. For more information, please see the Sprint PCS Vision  
User Guide online at www.sprint.com.  
Messaging — Send and receive emails and chat on your  
phone.  
Games — Play exciting games with full-color graphics,  
sound, and vibration.  
Ringers — Personalize your phone by downloading and  
assigning different ringers to numbers in your Contacts.  
Screen Savers — Download unique images to use as  
screen savers – or make it easy to tell who’s calling by  
assigning specific images to numbers in your Contacts.  
Web — Experience full-color graphic versions of popular  
Web sites from your phone.  
Getting Started With Sprint PCS Vision  
This section will help you learn the basics of using your  
Sprint PCS Vision services, including managing your user  
name, launching a Vision connection, and navigating the  
Web with your phone.  
Your User Name  
When you buy a phone and sign up for service, you're  
automatically assigned a user name, which is typically based  
on your name and a number, followed by “@sprint.com.” (For  
example, the third John Smith to sign up for Sprint PCS Vision  
services might have [email protected] as his user name.)  
196  
Section 3B: Sprint PCS Vision  
       
When you use Sprint PCS Vision services, your user name is  
submitted to identify you to the Nationwide Sprint PCS  
Network. The user name is also useful as an address for  
Sprint PCS Mail, as a way to personalize Web services, and as  
an online virtual identity.  
Your user name will be automatically programmed into your  
phone. You don't have to enter it.  
Finding Your user name  
If you aren't sure what your Sprint PCS Vision user name is,  
you can easily find it online or on your phone.  
To find your user name:  
At www.sprint.com. Sign on to your account using your  
phone number and password. To display your user name,  
click the My Personal Information menu, and then click  
Vision User Name.  
On your phone. You can find your user name under the  
Phone Info option in your phone's Settings menu (Menu >  
Settings > Phone Info > Phone Number).  
Launching a Sprint PCS Vision Connection  
To launch a Sprint PCS Vision connection:  
Select Menu > Web. (Your Sprint PCS Vision connection  
will open and the Sprint PCS Vision home page will be  
displayed.)  
Section 3B: Sprint PCS Vision  
197  
   
The Sprint PCS Vision Home Page  
You can also press the navigation key right to access  
the Web.  
Shortcut:  
If Net Guard is enabled and displayed (see page 199), press  
OK (right softkey) to continue and access the Web.  
Note:  
While connecting, the following will appear on the screen:  
Vision Connecting....  
If you had a previous Sprint PCS Vision connection, the last  
page you visited may be displayed when you launch your  
browser. When this occurs, you may not see the  
“Connecting...” message when you launch the session.  
Though the browser is open, you are not currently in an active  
data session—that is, no data is being sent or received. As  
soon as you navigate to another page, the active session will  
open and you will see the “Connecting...” message.  
198  
Section 3B: Sprint PCS Vision  
 
Net Guard  
When you first connect to the Web, the Net Guard will appear  
to confirm that you want to connect. This feature helps you  
avoid accidental connections. You can disable the Net Guard  
in the future by selecting Always Auto-Connect when the Net  
Guard is displayed.  
To change your Net Guard settings:  
Select Menu >Settings > PCS Vision > Net Guard.  
On to activate the Net Guard.  
Off to deactivate the Net Guard.  
When enabled, the Net Guard appears only once per session.  
The Net Guard does not appear if the phone is merely  
reconnecting due to a time-out.  
Note:  
Section 3B: Sprint PCS Vision  
199  
   
Sprint PCS Vision Connection Status and Indicators  
Your phone's display lets you know the current status of your  
Sprint PCS Vision connection through indicators which  
appear at the top of the screen. The following symbols are  
used:  
Your Sprint PCS Vision connection is active (data is  
being transferred); the transmit/receive symbol will  
blink to indicate data transmission. Incoming voice  
calls go directly to voicemail; outgoing voice calls  
can be made, but the Sprint PCS Vision connection  
will terminate.  
Your Sprint PCS Vision connection is dormant. (No  
data is being sent or received.) Though not  
currently active, when dormant the phone can  
restart an active connection quickly; voice calls can  
be made and received.  
Your phone is not currently able to access  
Sprint PCS Vision service features.  
If no indicator appears, your phone does not have a current  
Sprint PCS Vision connection. To launch a connection, see  
200  
Section 3B: Sprint PCS Vision  
Navigating the Web  
Navigating through menus and Web sites during a  
Sprint PCS Vision session is easy once you've learned  
a few basics. Here are some tips for getting around:  
Softkeys  
During a Sprint PCS Vision session, the bottom line of your  
phone's display contains one or more softkeys. These keys are  
shortcut controls for navigating around the Web, and they  
correspond to the softkey buttons directly below the phone’s  
display screen.  
Depending on which Web sites you visit, the labels on the  
softkeys may change to indicate their function.  
Tip:  
To use softkeys:  
Press the desired softkey button. (If an additional  
pop-up menu appears when you press the softkey  
button, select the menu items using your keypad [if  
they’re numbered] or by highlighting an option and  
pressing  
.)  
Scrolling  
As with other parts of your phone's menu, you'll have to scroll  
up and down to see everything on some Web sites.  
To scroll line by line through Web sites:  
Press the navigation key up and down.  
To scroll page by page through Web sites:  
Press the volume buttons on the side of the phone.  
Section 3B: Sprint PCS Vision  
201  
   
Selecting  
Once you've learned how to use softkeys and scroll, you can  
start navigating the Web.  
To select onscreen items:  
Use the navigation key to highlight the desired item,  
and then press the desired softkey button  
(or press  
).  
You’ll find that the left softkey is used primarily for selecting  
items. This softkey is often labeled “OK.”  
Tip:  
If the items on a page are numbered, you can use your keypad  
(number keys) to select an item. (The tenth item in a  
numbered list may be selected by pressing the 0 key on your  
phone’s keypad, even though the number 0 doesn’t appear  
on the screen.)  
Links, which appear as underlined text, allow you to jump to  
Web pages, select special functions, or even place phone calls.  
To select links:  
Highlight the link and press the appropriate softkey.  
Going Back  
To go back one page:  
Press the  
key on your phone.  
The BACK key is also used for deleting text (like a BACKSPACE  
key) when you are entering text.  
Note:  
202  
Section 3B: Sprint PCS Vision  
Going Home  
To return to the Sprint PCS Vision home page from any other Web page:  
Press and hold  
– or –  
.
Select Menu > Home.  
Sprint PCS Messaging  
Accessing Messaging  
Now you can send and receive emails and text messages  
and participate in Web-based chatrooms right from your  
phone. Messaging allows you to stay connected to friends,  
family, and coworkers 24 hours a day anywhere on the  
Nationwide Sprint PCS Network.  
Message Types  
There are many types of text messaging available on your  
phone. These include SMS Text Messaging, Sprint® Instant  
Messaging, Email, and Chat.  
(Sprint PCS Voicemail provides voicemail-to-mailbox  
messaging. For information on using your phone’s voicemail  
Section 3B: Sprint PCS Vision  
203  
     
Accessing Sprint PCS Mail  
Sprint PCS Mail allows you to perform many of the typical  
email functions from your phone that you can from your  
personal computer. You can manage your Sprint PCS Mail  
account from your phone or from your personal computer at  
www.sprint.com.  
To access Sprint PCS Mail from your phone:  
1. Select Menu > Messaging > IM & Email. (If you’re a first-  
time user, your phone will prompt you to set up your  
Sprint PCS Mail account by establishing a user name  
and password.)  
2. Select the folder you wish to view, such as Inbox or  
Compose.  
For information and instructions about reading, replying to,  
and composing Sprint PCS Mail, please see the Sprint PCS  
Vision Guide at www.sprint.com.  
Accessing Additional Email Providers  
With Sprint PCS Vision, you can use popular email services  
such as AOL® Mail, Yahoo!® Mail, MSN® Hotmail, and  
EarthLink® to keep in touch, even while you’re on the go.  
To access email providers from your phone:  
1. From the Sprint PCS Vision home page, select Messaging  
> Email.  
2. Select an email provider, such as PCS Mail, AOL, MSN  
Hotmail, Yahoo!, Earthlink, or others.  
3. Use your keypad to enter the required sign-in  
information for the selected provider, such as user  
name, email address, and/or password, and select  
Sign In. (Your mailbox for the selected provider will be  
displayed.)  
204  
Section 3B: Sprint PCS Vision  
     
The information required to sign in will vary depending on  
the email provider you are accessing.  
Note:  
4. Follow the onscreen instructions to read, reply to,  
compose, send, and manage emails in your account.  
Accessing Sprint Instant Messaging  
Sprint PCS Vision also provides you with access to popular  
instant messaging (IM) clients, including AOL® Instant  
TM  
Messenger , MSN® Messenger, and Yahoo!® Messenger.  
To access instant messaging clients from your phone:  
1. From the Sprint PCS Vision home page, select Messaging  
> Instant Messaging.  
2. Select an IM provider, such as AOL Instant Messenger,  
MSN Messenger, or Yahoo! Messenger.  
3. Use your keypad to enter the required sign-in  
information for the selected provider, such as user name  
and/or password, and select Sign In. (Your IM screen for  
the selected provider will be displayed.)  
The information required to sign in will vary depending on  
the instant messaging provider you are using.  
Note:  
4. Follow the onscreen instructions to read, reply to,  
compose, and send messages, and to manage messages  
in your IM account.  
Section 3B: Sprint PCS Vision  
205  
 
Accessing Wireless Chatrooms  
Sprint PCS Vision gives you the ability to join wireless  
chatrooms from your phone, to send text messages and icons  
to chatroom participants, or to launch a one-on-one (private)  
chatroom.  
To access a chatroom from the browser:  
1. Select Messaging > Chat & Dating >Jumbuck.  
2. Select Fast Flirting or Power Chat and select Link (  
).  
3. Select Link (  
). (You will see a disclaimer for Wireless  
Chat.)  
4. Select Menu (  
) > Agree to accept the disclaimer.  
5. Use your keypad to enter a nickname and select  
Done ( )> Go. (The chat menu will be displayed.)  
6. Select a chatroom from the menu (for example,  
“Friends” or “Singles”) and press Link (  
) to enter.  
7. Once in the chatroom, you may scroll through the  
postings to read messages from other chatroom  
participants and use your keypad to enter your own  
messages.  
For information about posting to chatrooms or setting up  
one-on-one sessions, please see the Sprint PCS Vision Guide  
at www.sprint.com.  
Note:  
Downloading Premium Services Content  
With Sprint PCS Vision you have access to a dynamic variety  
of Premium Service content, such as downloadable Games,  
Ringers, Screen Savers, and other applications. (Additional  
charges may apply.) The basic steps required to access and  
download Premium Service content are outlined below.  
206  
Section 3B: Sprint PCS Vision  
       
Accessing the Download Menus  
To access the Sprint PCS Vision download menus:  
1. Select Menu > Web.  
2. From the Vision Home page select Downloads.  
3. Select the type of file you wish to download (Call Tones,  
Games, Ringers, Screen Savers, Applications, En Espanol,  
Send A Gift, or My Content Manager) and press  
.
4. Select Get New and press  
. (For more information on  
Selecting an Item to Download  
You can search for available items to download in a number  
of ways:  
Featured displays a rotating selection of featured items.  
Categories allows you to narrow your search to a general  
category, such as College Logos for Screen Savers. (There  
may be several pages of available content in a list. Select  
Next 9 to view additional items.)  
Search allows you to use your keypad to enter search  
criteria to locate an item. You may enter an entire word or  
title or perform a partial-word search. (For example,  
entering “goo” returns “Good Ol’ Boy,” “The Good, the  
Bad, and the Ugly,” and “Goofy - Club.”)  
Downloading an Item  
Once you’ve selected an item you wish to download,  
highlight it and press  
or press OK (  
). You will see a  
summary page for the item including its title, the vendor, the  
download details, the file size, and the cost. Links allow you  
Section 3B: Sprint PCS Vision  
207  
to view the License Details page, which outlines the price,  
license type, and length of license for the download; and the  
Terms of Use page, which details the Premium Services Terms  
of Use and your responsibility for payment.  
To download a selected item:  
1. From the information page, select Buy. (The item will  
download automatically. When the New Download  
screen appears, the item has been successfully  
downloaded to your phone.)  
If you have not previously purchased an item, you will be  
prompted to create your purchasing profile.  
Note:  
2. Select an option to continue:  
Select Use (left softkey) to assign the downloaded  
item (or to start, in the case of a game or  
application). Your Sprint PCS Vision session will end  
and you will be redirected to the appropriate phone  
menu screen.  
Select Shop (right softkey) to browse for other items  
to download.  
Press  
to quit the browser and return to standby  
mode.  
208  
Section 3B: Sprint PCS Vision  
Using My Content Manager  
Whether you purchase your Premium Services content from  
your phone or from your online account management page at  
www.sprint.com, all of your purchases are stored in My Content  
Manager and may be downloaded to your phone from there.  
My Content Manager is a storage area on the Nationwide  
Sprint PCS Network that is assigned specifically to your  
account. It allows you to store all of your Premium Service  
downloadable files. The files remain in My Content Manager  
until their license terms have expired – even after you have  
downloaded the content to your phone. This provides you  
with a convenient place to access information about your  
downloaded files without having to store the information in  
your phone’s memory.  
To access My Content Manager:  
From the Sprint PCS Vision home page, select  
Downloads > My Content Manager.  
To download purchased content from My Content Manager:  
1. From the My Content Manager display (see above),  
highlight the item you wish to download and  
press  
. (The information page for the selected item  
will be displayed.)  
2. Scroll to highlight Download and press  
. (The item  
will download automatically. When the New Download  
screen appears, the item has been successfully  
downloaded to your phone.)  
3. Select an option to continue:  
Select Use (left softkey) to assign the downloaded  
item (or to start, in the case of a game or  
application). Your Sprint PCS Vision session will end  
and you will be redirected to the appropriate phone  
menu screen.  
Section 3B: Sprint PCS Vision  
209  
 
Select Shop (right softkey) to browse for other items  
to download.  
Press  
to quit the browser and return to standby  
mode.  
For complete information and instructions on downloading  
Games, Ringers, Screen Savers, and Applications, see the  
Sprint PCS Vision Guide at www.sprint.com.  
Web  
Exploring the Web  
With Web access you can browse full-color graphic versions  
of your favorite Web sites, making it easier than ever to stay  
informed while on the go. Follow sports scores and breaking  
news and weather and shop on your phone anywhere on the  
Nationwide Sprint PCS Network.  
In addition to the features already covered in this section, the  
Sprint PCS Vision home page offers access to these colorful,  
graphically rich Web categories, including News, Weather,  
Entertainment, Sports, Finance, Travel, Shopping, Tools, and  
Business Links, as well as useful management options  
including My Account and Search. Many sites are available  
under more than one menu – choose the one that's most  
convenient for you.  
210  
Section 3B: Sprint PCS Vision  
   
Using the Browser Menu  
Navigating the Web from your phone using the Sprint PCS  
Vision home page is easy once you get the hang of it. For  
details on how to navigate the Web, select menu items, and  
Although the Sprint PCS Vision home page offers a broad and  
convenient array of sites and services for you to browse, not  
all sites are represented, and certain functions, such as going  
directly to specific Web sites, are not available. For these and  
other functions, you will need to use the browser menu. The  
browser menu offers additional functionality to expand your  
use of the Web on your phone.  
Opening the Browser Menu  
The browser menu may be opened anytime you have an  
active Sprint PCS Vision session, from any page you are  
viewing.  
To open the browser menu:  
Press the right softkey. (The browser menu will be  
displayed in a drop-down list.)  
Options available under the browser menu include:  
Home. Returns the browser to the Sprint PCS Vision home  
page.  
Forward. Returns you to a previously viewed page (after  
having used the  
key).  
Mark this Page. Allows you to bookmark the current site.  
View Bookmarks. Allows you to access bookmarked sites,  
and manage your bookmarks.  
Search. Launches a Google search.  
Send page to.... Allows you to send the current page as a  
text message.  
Section 3B: Sprint PCS Vision  
211  
 
Go to URL. Allows you to navigate directly to a Web site by  
entering its URL (Web site address).  
View History. Keeps a list of links to your most recently  
visited sites. To navigate to a site, highlight it, press  
,
and then select Connect.  
Refresh this page. Reloads the current Web page.  
More. Displays additional options:  
Show URL. Displays the URL (Web site address) of the  
site you're currently viewing.  
Restart Browser. Refreshes the current browser  
session.  
About Browser. Displays technical information about  
the browser, its version, and the encryption version,  
and provides links to Certificate Information for the  
various components.  
Preferences. Displays all the preferences available for  
the browser.  
Creating a Bookmark  
Bookmarks allow you to store the address of your favorite  
Web sites for easy access at a later time.  
To create a bookmark:  
1. Go to the Web page you want to mark.  
2. Press the right softkey to open the browser menu.  
3. Select Mark this Page and press  
to save the  
bookmark.  
4. Press  
to exit the pop-up screen.  
Bookmarking a page does not store the page’s contents, just  
its address.  
Note:  
Some pages cannot be bookmarked. Whether a particular  
Web page may be marked is controlled by its creator.  
212  
Section 3B: Sprint PCS Vision  
 
Accessing a Bookmark  
To access a bookmark:  
1. Press the right softkey to open the browser menu.  
2. Select View Bookmarks.  
3. Scroll to highlight the bookmark youd like to access and  
press  
to go to the Web site (or press the number  
corresponding to the bookmark you wish to access).  
Deleting a Bookmark  
To delete a bookmark:  
1. Press the right softkey to open the browser menu.  
2. Select View Bookmarks.  
3. Scroll to highlight the bookmark youd like to delete and  
press Menu (  
4. Select Delete and press  
5. Select OK ( ) to confirm and remove the bookmark.  
6. Press to exit the pop-up screen.  
).  
.
Going to a Specific Web Site  
To go to a particular Web site by entering a URL (Web site  
address):  
1. Press the right softkey to open the browser menu.  
2. Select Go to URL.  
3. Select the URL field and press  
4. Use your keypad to enter the URL of the Web site you  
wish to go to and press  
.
.
Not all Web sites are viewable on your phone.  
Note:  
Section 3B: Sprint PCS Vision  
213  
   
Reloading a Web Page  
To reload (refresh) a Web page:  
1. Press  
to open the browser menu.  
2. Select Refresh this Page. (The browser will reload the  
current Web page.)  
Restarting the Web Browser  
If the Web browser appears to be malfunctioning or stops  
responding, you can usually fix the problem by simply  
restarting the browser.  
To restart the Web browser:  
1. Press  
to open the browser menu.  
2. Select More > Restart Browser.  
214  
Section 3B: Sprint PCS Vision  
 
Sprint PCS Vision FAQs  
How will I know when my phone is ready for Sprint PCS Vision  
service?  
Your user name (for example, [email protected]) will be  
displayed in the Phone Info. listing in your phone’s Settings  
menu.  
How do I sign in for the first time?  
You are automatically signed in to access Sprint PCS Vision  
services when you turn on your phone.  
How do I know when my phone is connected to Sprint PCS Vision  
services?  
Your phone automatically connects when Sprint PCS Vision  
service is used or an incoming message arrives. Your phone  
will also display the  
indicator.  
Can I make calls and use Sprint PCS Vision services at the same  
time?  
You cannot use voice and Sprint PCS Vision services  
simultaneously. If you receive a call while Sprint PCS Vision  
service is active, the call will be forwarded to voicemail. You  
can place an outgoing call anytime, but it will interrupt any  
in-progress Sprint PCS Vision session.  
When is my data connection active?  
Your connection is active when data is being transferred.  
Outgoing calls are allowed; incoming calls go directly to  
voicemail. When active, the  
phone’s display screen.  
indicator flashes on your  
Section 3B: Sprint PCS Vision  
215  
   
When is my data connection dormant?  
If no data is received for 10 seconds, the connection goes  
dormant. When the connection is dormant, voice calls are  
allowed. (The connection may become active again quickly.) If  
no data is received for an extended period of time, the  
connection will terminate.  
Can I sign out of data services?  
You can sign out without turning off your phone; however,  
you will not be able to browse the Web or use other  
Sprint PCS Vision services. While signed out, you can still  
place or receive phone calls, check voicemail, and use other  
voice services. You may sign in again at any time. To sign out,  
go to Settings > PCS Vision > Disable Vision in your phone’s  
menu.  
216  
Section 3B: Sprint PCS Vision  
 
Section 3C  
Sprint PCS Voice Command  
In This Section  
With Sprint PCS Voice Command, reaching your friends,  
family, and coworkers has never been easier – especially  
when you’re on the go. You can even listen to Web-based  
information, such as news, weather, and sports. Your voice  
does it all with Sprint PCS Voice Command.  
This section outlines the Sprint PCS Voice Command service.  
Section 3C: Sprint PCS Voice Command  
217  
       
Getting Started With Sprint PCS  
Voice Command  
With Sprint PCS Voice Command:  
You can store all your contacts’ phone numbers, so you  
can simply say the name of the person you want to call.  
There’s no need to punch in a lot of numbers, memorize  
voicemail passwords, or try to dial while you’re driving.  
You can call anyone in your address book – even if you  
don’t remember their phone number.  
You don’t need to worry about losing your contacts or  
address book. This advanced service is network-based, so  
if you switch or happen to lose your phone, you won’t lose  
your contacts or address book.  
It’s Easy to Get Started  
There are two easy ways to sign up for Sprint PCS Voice  
Command:  
Sign up when you purchase and activate your phone.  
Just dial  
from your phone to contact Sprint  
Customer Service and sign up.  
There is a monthly charge for Sprint PCS Voice Command.  
218  
Section 3C: Sprint PCS Voice Command  
 
Creating Your Own Address Book  
You can program up to 299 names and numbers into your  
personal address book. Each entry will support up to five  
different numbers, with a maximum of 299 phone numbers  
supported; and with the advanced technology of Sprint PCS  
Voice Command, you can have instant access to all of them.  
There are four ways to update your address book:  
On the Web. Go to www.talk.sprintpcs.com and sign on with  
your phone number and password to access a fully  
functional Web-based address book to create and update  
your contacts.  
Use an Existing Address Book. Automatically merge address  
books from desktop software applications with Sprint  
SyncSM Services for no additional charge. Simply click the  
“Click to synchronize” button within your Sprint PCS Voice  
Command personal address book at www.talk.sprintpcs.com.  
Use Voice Recordings. Simply dial  
and say, Add  
name.” You will then be asked to say the name and  
number you want to add to your personal address book.  
Your address book can store up to 20 voice-recorded  
names at once.  
Call Sprint 411. If you don’t have a computer or Internet  
access handy, you can have Sprint 411 look up phone  
numbers for you and automatically add them to your  
address book. Just dial  
and say “Call operator”  
and we’ll add two names and all the numbers associated  
with those names to your address book for our standard  
directory assistance charge.  
Section 3C: Sprint PCS Voice Command  
219  
   
Making a Call With Sprint PCS  
Voice Command  
To make a call with Sprint PCS Voice Command:  
1. Press  
and you’ll hear the “Ready” prompt.  
2. After the “Ready” prompt, simply say, in a natural voice,  
“Call” and the name of the person or the number youd  
like to call. (For example, you can say, “Call Jane Smith at  
work,” “Call John Baker on the mobile phone,” “Call 555-  
1234,” or “Call Bob Miller.”)  
3. Your request will be repeated and you will be asked to  
verify. Say “Yes” to call the number or person. (The  
number will automatically be dialed.) Say “No” if you  
wish to cancel.  
Keep in mind that Sprint PCS Voice Command recognizes not  
only your voice, but any voice, so that others can experience  
the same convenience if they use your phone.  
Tip:  
For more helpful hints on Sprint PCS Voice Command,  
including a list of recognized commands and an interactive  
tutorial, visit www.talk.sprintpcs.com.  
220  
Section 3C: Sprint PCS Voice Command  
   
Accessing Information Using  
Sprint PCS Voice Command  
To access information using Sprint PCS Voice Command:  
1. Press  
.
2. Say “Call the Web” and choose from a listing of  
information categories like news, weather, and sports.  
– or –  
Simply say “Call news room,” “Call the weather,” “Call Sports  
Central,” etc.  
Sprint PCS Voice Command is not available while roaming off  
the Nationwide Sprint PCS Network.  
Note:  
Section 3C: Sprint PCS Voice Command  
221  
   
222  
Section 4  
Safety and Warranty  
Information  
 
224  
Section 4A  
Important Safety Information  
In This Section  
This phone guide contains important operational and safety  
information that will help you safely use your phone. Failure to  
read and follow the information provided in this phone guide  
may result in serious bodily injury, death, or property  
damage.  
225  
     
General Precautions  
There are several simple guidelines to operating your phone properly and  
Speak directly into the mouthpiece.  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending, or  
sitting on it.  
Any changes or modifications to your phone not expressly approved in  
this document could void your warranty for this equipment and void  
your authority to operate this equipment.  
For the best care of your phone, only Sprint-authorized  
personnel should service your phone and accessories. Failure  
to do so may be dangerous and void your warranty.  
Note:  
226  
 
Maintaining Safe Use of and Access to  
Your Phone  
Do Not Rely on Your Phone for Emergency Calls  
Mobile phones operate using radio signals, which cannot guarantee  
connection in all conditions. Therefore you should never rely solely upon  
any mobile phone for essential communication (e.g., medical  
emergencies). Emergency calls may not be possible on all cellular networks  
or when certain network services and/or mobile phone features are in use.  
Check with your local service provider for details.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without a  
hands-free device) is prohibited in some jurisdictions. Laws vary as to  
specific restrictions. Remember that safety always comes first.  
Purchase an optional hands-free accessory at your local Sprint  
Store, or call the Sprint PCS Accessory Hotline at 1-800-974-  
Tip:  
SM  
2221 or by dialing #222 on your phone.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any special  
regulations in a given area. Turn your phone off in areas where use is  
forbidden or when it may cause interference or danger.  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF)  
signals. However, RF signals from wireless phones may affect inadequately  
shielded electronic equipment.  
RF signals may affect improperly installed or inadequately shielded  
electronic operating systems and/or entertainment systems in motor  
vehicles. Check with the manufacturer or their representative to determine  
if these systems are adequately shielded from external RF signals. Also  
check with the manufacturer regarding any equipment that has been  
added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as  
pacemakers and hearing aids, to determine if they are adequately shielded  
from external RF signals.  
227  
 
Always turn off the phone in health-care facilities and request  
permission before using the phone near medical equipment.  
Note:  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible  
interference with aircraft systems, the U.S. Federal Aviation Administration  
(FAA) regulations require you to have permission from a crew member to  
use your phone while the plane is on the ground. To prevent any risk of  
interference, FCC regulations prohibit using your phone while the plane is  
in the air.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone off when in  
a blasting area or in other areas with signs indicating two-way radios  
should be turned off. Construction crews often use remote-control RF  
devices to set off explosives.  
Turn your phone off when you're in any area that has a potentially  
explosive atmosphere. Although it's rare, your phone and accessories could  
generate sparks. Sparks can cause an explosion or fire, resulting in bodily  
injury or even death. These areas are often, but not always, clearly marked.  
They include:  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as grain, dust,  
or metal powders.  
Any other area where you would normally be advised to turn off your  
vehicle’s engine.  
Never transport or store flammable gas, flammable liquids, or  
explosives in the compartment of your vehicle that contains  
your phone or accessories.  
Note:  
Restricting Children’s Access to Your Phone  
Your phone is not a toy. Do not allow children to play with it as they could  
hurt themselves and others, damage the phone or make calls that increase  
your Sprint PCS Invoice.  
228  
Using Your Phone With a Hearing Aid  
Device  
Your phone has been tested for hearing aid device compatibility. When  
some wireless phones are used near some hearing devices (hearing aids  
and cochlear implants), users may detect a buzzing, humming, or whining  
noise. Some hearing devices are more immune than others to this  
interference noise, and phones also vary in the amount of interference  
they generate.  
The wireless telephone industry has developed ratings for some of their  
mobile phones, to assist hearing device users in finding phones that may  
be compatible with their hearing devices. Not all phones have been rated.  
Phones that have been rated will have an “M3” or “M4” rating on the box.  
Your Sprint PCS Vision® A640 by Samsung has an M3 rating.  
Phones rated M3 or M4 meet FCC requirements and may generate less  
interference to hearing devices than phones that are not labeled. M4 is  
the better/higher of the two ratings.  
Note:  
The M3/M4 ratings do not guarantee successful interoperation between  
your phone and hearing aid device. Results will vary depending on the level  
of immunity of your hearing device and degree of your hearing loss.  
The more immune your hearing aid device is, the less likely you are to  
experience interference noise from your wireless phone. Hearing aid  
devices should have ratings similar to phones. Ask your hearing healthcare  
professional for the rating of your aids. Most new hearing aids have at least  
an M2 immunity level. Add the “M” ratings of your hearing aid and your  
phone to determine probable usability:  
Any combined rating equal to or greater than six offers best use.  
Any combined rating equal to five is considered normal use.  
Any combined rating equal to four is considred usable.  
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a  
combined rating of six for “best use.”  
Sprint further suggests you experiment with multiple phones (even  
those not labeled M3 or M4) while in the store to find the one that  
works best with your hearing aid device. Should you experience  
interference after purchasing your phone, promptly return it to the store.  
With the Sprint® 14 Day Risk Free Guarantee you may return the phone  
within 14 days of purchase for a full refund.  
229  
 
Getting the Best Hearing Device Experience With  
Your Phone  
To further minimize interference:  
There is usually less interference on the microphone setting than the  
telecoil setting.  
Set the phone’s Display and Keypad backlight settings to ensure the  
minimum time interval:  
1. Press Menu > Settings > Display > Backlight.  
2. Select Main Display or Keypad and press  
.
3. Select the minimum time setting (8 seconds) and press  
Use phones with a pull-out antenna. Phones with embedded  
antennae may produce more interference.  
.
Position the phone so the antenna is farthest from your hearing aid.  
Move the phone around to find the point with least interference.  
230  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s  
performance.  
Recently, there have been some public reports of wireless phone  
batteries overheating, catching fire, or exploding. It appears that  
many, if not all, of these reports involve counterfeit or inexpensive,  
aftermarket-brand batteries with unknown or questionable  
manufacturing standards. Sprint is not aware of similar problems with  
Sprint PCS® phones resulting from the proper use of batteries and  
accessories approved by Sprint or the manufacturer of your phone.  
Use only Sprint- or manufacturer-approved batteries and accessories  
found at Sprint Stores or through your phone’s manufacturer, or call  
1-866-343-1114 to order. They’re also available at www.sprint.com –  
click the Wireless link under Personal, and then click Accessories under  
Shop the Sprint PCS Store Online. Buying the right batteries and  
accessories is the best way to ensure they’re genuine and safe.  
In order to avoid damage, charge the battery only in temperatures that  
range from 32° F to 113° F (0° C  
to 45° C).  
Don’t use the battery charger in direct sunlight or in high humidity  
areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long  
period of time.  
It’s best to replace the battery when it no longer provides acceptable  
performance. It can be recharged hundreds of times before it needs  
replacing.  
Don’t store the battery in high temperature areas for long periods of  
time. It’s best to follow these storage rules:  
Less than one month:  
-4° F to 140° F (-20° C to 60° C)  
More than one month:  
-4° F to 113° F (-20° C to 45° C)  
Disposal of Lithium Ion (Li-Ion) Batteries  
For safe disposal options of your Li-Ion batteries, contact your nearest  
Sprint authorized service center.  
Special Note: Be sure to dispose of your battery properly. In some areas,  
the disposal of batteries in household or business trash may be prohibited.  
231  
 
Radiofrequency (RF) Energy  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s turned  
on, it receives and transmits radio frequency (RF) signals. When you use  
your phone, the system handling your call controls the power level. This  
power can range from 0.006 watts to 0.2 watts in digital mode.  
Knowing Radiofrequency Safety  
The design of your phone complies with updated NCRP standards  
described below.  
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and  
the American National Standards Institute (ANSI) joined in updating ANSI’s  
1982 standard for safety levels with respect to human exposure to RF  
signals. More than 120 scientists, engineers and physicians from  
universities, government health agencies and industries developed this  
updated standard after reviewing the available body of research. In 1993,  
the Federal Communications Commission (FCC) adopted this updated  
standard in a regulation. In August 1996, the FCC adopted hybrid standard  
consisting of the existing ANSI/IEEE standard and the guidelines published  
by the National Council of Radiation Protection and Measurements (NCRP).  
Body-Worn Operation  
To maintain compliance with FCC RF exposure guidelines, if you wear a  
handset on your body, use the Sprint supplied or approved carrying case,  
holster or other body-worn accessory. Use of non-Sprint-approved  
accessories may violate FCC RF exposure guidelines.  
For more information about RF exposure, visit the FCC Web site at  
232  
 
Specific Absorption Rates (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF energy  
absorbed in the head of a user of a wireless handset.  
The SAR value of a phone is the result of an extensive testing, measuring,  
and calculation process. It does not represent how much RF the phone  
emits. All phone models are tested at their highest value in strict  
laboratory settings. But when in operation, the SAR of a phone can be  
substantially less than the level reported to the FCC. This is because of a  
variety of factors including its proximity to a base station antenna, phone  
design and other factors. What is important to remember is that each  
phone meets strict federal guidelines. Variations in SARs do not represent a  
variation in safety.  
All phones must meet the federal standard, which incorporates a  
substantial margin of safety. As stated above, variations in SAR values  
between different model phones do not mean variations in safety. SAR  
values at or below the federal standard of 1.6 W/kg are considered safe for  
use by the public.  
The highest reported SAR values of the A640 are:  
CDMA mode (Part 22):  
Head: 1.23 W/kg; Body-worn: 0.401 W/kg  
PCS mode (Part 24):  
Head: 1.44 W/kg; Body-worn: 0.596 W/kg  
FCC Radiofrequency Emission  
This phone meets the FCC Radiofrequency Emission Guidelines.  
FCC ID number: A3LSPHa640S.  
More information on the phone's SAR can be found from the following FCC  
Owner’s Record  
The model number, regulatory number and serial number are located on a  
nameplate inside the battery compartment. Record the serial number in  
the space provided below. This will be helpful if you need to contact us  
about your phone in the future.  
Model: Sprint PCS Vision® Phone A640 by Samsung®  
Serial No.:  
233  
 
Phone Guide Proprietary Notice  
CDMA Technology is licensed by QUALCOMM Incorporated under one or  
more of the following patents:  
4,901,307 5,109,390 5,267,262 5,416,797  
5,506,865 5,544,196 5,657,420 5,101,501  
5,267,261 5,414,796 5,504,773 5,535,239  
5,600,754 5,778,338 5,228,054 5,337,338  
5,710,784 5,056,109 5,568,483 5,659,569  
5,490,165 5,511,073  
T9 Text Input is licensed by Tegic Communications and is covered by U.S.  
Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents  
pending.  
Phone Guide template version 5A (September 2005)  
234  
 
Section 4B  
Manufacturer’s Warranty  
In This Section  
Your phone has been designed to provide you with reliable,  
worry-free service. If for any reason you have a problem with  
your equipment, please refer to the manufacturer’s warranty  
in this section.  
For information regarding the terms and conditions of  
service for your phone, please visit www.sprint.com and click  
the “Terms & Conditions” link at the bottom or call Sprint  
Customer Service at 1-888-211-4PCS.  
235  
   
Manufacturer’s Warranty  
STANDARD LIMITED WARRANTY  
What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS  
AMERICA, L.P. (“SAMSUNG”) warrants to the original purchaser  
(“Purchaser”) that SAMSUNG's Phones and accessories (“Products”) are  
free from defects in material and workmanship under normal use and  
service for the period commencing upon the date of purchase and  
continuing for the following specified period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/Pouch/Holster  
Game Pad  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper  
use of Product by Purchaser. This Limited Warranty does not cover: (a)  
defects or damage resulting from accident, misuse, abuse, neglect,  
unusual physical, electrical or electromechanical stress, or modification of  
any part of Product, including antenna, or cosmetic damage; (b)  
equipment that has the serial number removed or made illegible; (c) any  
plastic surfaces or other externally exposed parts that are scratched or  
damaged due to normal use; (d) malfunctions resulting from the use of  
Product in conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or damage  
from improper testing, operation, maintenance, installation, or  
adjustment; (f) installation, maintenance, and service of Product, or (g)  
Product used or purchased outside the United States or Canada. This  
Limited Warranty covers batteries only if battery capacity falls below 80%  
of rated capacity or the battery leaks, and this Limited Warranty does not  
cover any battery if (i) the battery has been charged by a battery charger  
not specified or approved by SAMSUNG for charging the battery, (ii) any of  
the seals on the battery are broken or show evidence of tampering, or (iii)  
the battery has been used in equipment other than the SAMSUNG phone  
for which it is specified.  
236  
 
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without  
charge to Purchaser, any defective component part of Product. To obtain  
service under this Limited Warranty, Purchaser must return Product to an  
authorized phone service facility in an adequate container for shipping,  
accompanied by Purchaser's sales receipt or comparable substitute proof  
of sale showing the date of purchase, the serial number of Product and the  
sellers' name and address. To obtain assistance on where to deliver the  
Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt,  
SAMSUNG will promptly repair or replace the defective Product. SAMSUNG  
may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or  
components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches  
and holsters will be warranted for a period of ninety (90) days. All other  
repaired/replaced Product will be warranted for a period equal to the  
remainder of the original Limited Warranty on the original Product or for  
90 days, whichever is longer. All replaced parts, components, boards and  
equipment shall become the property of SAMSUNG. If SAMSUNG  
determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or  
return of such Product.  
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE  
EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT AS IS,” AND SAMSUNG MAKES NO WARRANTY OR  
REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
“THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
“WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
“DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
“THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
“COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW,  
RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES  
AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF  
APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME  
DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
237  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF  
ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR  
INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY  
FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH  
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS  
OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING  
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY  
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF  
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY  
OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION  
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE  
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO  
HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE  
OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,  
SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE  
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY  
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW  
PERMITS.  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY  
SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE  
NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO  
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY  
OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-  
PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT.  
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH  
THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
238  
This Limited Warranty allocates risk of Product failure between Purchaser  
and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of  
risk and the limitations of liability contained in this Limited Warranty. The  
agents, employees, distributors, and dealers of SAMSUNG are not  
authorized to make modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether oral or  
written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Samsung Telecommunications America, L.P.  
1301 E. Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2006 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written  
approval.  
Specifications and availability subject to change without notice. [011604]  
239  
240  
Preset Messages 45  
L
R
Lock Code  
Ready Link - See Sprint PCS  
Ready Link  
Restriction 66  
Ringer Volume 51  
Setting Roam Mode 81  
Changing 71  
Locking Your Phone 70  
M
Messaging  
S
Setting Alerts 58  
Signature 59  
My Content  
Security Menu 70  
My Content Manager 209  
SMS Voice Messaging 189–  
N
Software  
Updating 63  
P
Special Numbers 73  
Sprint 411 8  
Phone Number  
Displaying 29  
Finding 38  
Sprint Customer Service 7  
Sprint PCS Picture Mail  
Downloading Pictures 138  
Uploading Pictures 138  
Web Site 136  
Call Answer Mode 66  
Messaging Settings 58–60  
Sprint PCS Ready Link 143–  
Pictures - Erasing 75  
242  

Yamaha CDX 10 User Manual
West Bend L5681A User Manual
TRENDnet Computer Accessories TV IP212 User Manual
Tascam US 1800 User Manual
Sony Xperia L 1271 1957 User Manual
Seagate ST3300831ACE User Manual
Seagate Barracuda ST3250310NS User Manual
Samsung Jet S8000 2 GB User Manual
Philips CT0699SLV User Manual
Panasonic Cell Phone kx t7030 User Manual