ISTRUZIONI PER L’USO
Leggere attentamente queste istruzioni d’uso prima di
utilizzare la macchina
OPERATING INSTRUCTIONS
Read these operating instructions carefully before
using the machine
BEDIENUNGSANLEITUNG
Bedienungsanleitung ist vor dem ersten Gebrauch der
Maschine aufmerksam zu lesen
MODE D’EMPLOI
Lire attentivement ce mode d’emploi avant d’utiliser
la machine
INSTRUCCIONES DE USO
Diese Leer atentamente estas instrucciones de uso
antes de utilizar la máquina
INSTRUÇÕES PARA USO
Ler atentamente estas instruções de uso antes de
utilizar a máquina
GEBRUIKSAANWIJZING
Lees deze INSTRUCTIES aandachtig door, alvorens
het apparaat te gebruiken
TYPE SUP021YADR
FOR HOUSEHOLD USE ONLY
25
GENERAL INFORMATION
TECHNICAL SPECIFICATIONS
This coffee machine is ideal for preparing espresso coffee either with coffee beans
or preground coffee and also features a device for dispensing steam and hot water.
This elegantly styled machine is designed for household use only. It is not suitable
for continuous professional-type use.
• Voltage rating
See rating plate on appliance
• Power rating
See rating plate on appliance
• Casing material
• Size (w x h x d) (mm)
• Weight (Kg)
Metal
Warning. The manufacturer shall accept no liability for damage or injury
caused by:
285 x 375 x 400
11
•
•
•
•
•
improper use or use for other than the intended purposes;
repairs carried out by anyone other than an authorised service centre;
tampering with the power cord;
tampering with any machine component;
use of spare parts and accessories other than those supplied by the
manufacturer.
• Cord length (mm)
• Control panel
1200
Front (Digital)
2 - Extractible
See rating plate on appliance
15
• Water tank (lit.)
• Power supply
The warranty will be invalidated in such cases.
• Pump pressure (bars)
• Boiler
2 - Stainless steel
300 of coffee beans
Steam ready in a few seconds
Ceramic
• Coffee container capacity (g.)
• Rapid Steam
TO FACILITATE INTERPRETATION
A warning triangle draws attention to the instructions that are impor-
tant for user safety. Please carefully abide by these instructions to
avoid serious injury!
• Grinders
• Quantity of ground coffee
• Dreg drawer capacity
• Safety devices
6 - 10 g
13
Boiler pressure safety valve
safety thermostat
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to
anyone else who should use the coffee machine. For further information or an
explanation of problems not completely or sufficiently addressed in these instruc-
tions, contact an authorised service centre.
Subject to engineering and manufacturing changes as warranted by technological
developments.
Machine in conformity with European Directive 89/336/EEC (Italian Legislative
Decree 476 of 04/12/92) concerning electromagnetic compatibility.
26
SAFETY RULES
IN THE EVENT OF AN EMERGENCY
HAZARDS
Immediately unplug the appliance.
- The appliance must not be used by children or by individuals unacquainted with
the operating instructions.
THE APPLIANCE MAY ONLY BE USED
- In a closed place.
- To prepare coffee, dispense hot water, froth milk or heat beverages using
steam.
- For household use.
- By adults in full possession of their physical and mental capacities.
- The appliance is dangerous for children. If left unattended it must be
switched off.
- Do not leave the materials used to pack the appliance within children’s reach.
- Do not direct a jet of hot steam and/or hot water toward yourself or others:
danger of scalding.
- Do not introduce any objects through the openings in the appliance (Electrical
hazard!).
NEVER USE THE APPLIANCE
for purposes other than those indicated above to avoid hazards. Never place
any substances in the containers other than those specified in the instruction
manual. When you fill a container, make sure all nearby containers are closed.
Fill the water tank only with fresh drinking water: hot water and/or other liquids
may damage the machine. Do not use carbonated water. The coffee grinder may
be adjusted only while it is running. Do not introduce your fingers or any material
other than coffee beans into the coffee grinder. Before attempting to access the
inside of the coffee grinder, switch OFF the machine and remove the plug from
the electric socket. Do not put coffee beans or instant coffee into the ground coffee
container.
- Do not touch the plug when your hands or feet are wet. Do not unplug the
appliance by yanking at the power cord.
- Warning: contact with hot water, steam or and hot water/steam nozzle may
cause burns.
FAULTS
- Do not use the appliance if it malfunctions or you suspect damage, e.g.
after a fall.
- Repairs must be performed by an authorised service centre.
- Do not use an appliance with a defective power cord. The cord may be replaced
exclusively by a service centre (Electrical hazard!).
- Switch off the appliance before opening the service door. Danger of burns!
MAINS CONNECTION
Connect the coffee machine to a suitable electric socket. The voltage must match
the voltage specified on the appliance rating plate.
CLEANING / DESCALING
- Before cleaning the appliance, unplug it and allow it to cool down.
- Avoid exposing the appliance to splashes of water. Do not immerge it in water.
- Do not dry machine components in a conventional or microwave oven.
INSTALLATION
- Choose a perfectly level supporting surface. Do not place on a hot surface!
- Maintain a distance of 10 cm from walls and electric or gas burners.
- Do not keep at temperatures below 0 °C; the appliance may be damaged by
freezing.
SPARE PARTS
To guarantee safety, you should use only original spare parts and accessories.
- The electric socket must be accessible at all times.
- The power cord must not be damaged, secured with clamps, placed on very hot
surfaces etc.
- Do not let the power cord hang loosely (Warning: danger of tripping or of
causing the appliance to fall).
DISPOSAL
- The packing materials can be recycled.
- Appliance: unplug the appliance and cut the power cord.
- Deliver the appliance and power cord to a service centre or public waste
disposal facility.
- Do not use the power cord to carry or pull the coffee machine.
27
COMPONENT DESCRIPTION
Coffee bean container
Cup heater plate
Coffee bean container lid
Water tank lid
Grind adjustment knob
Coffe container ope-
ning button
Preground coffee
dispenser lid
Water tank
Control panel
Cleaning
brush
Brew group key
Steam knob
Service door
SBS
Water hardness
test
Preground
coffee measure
ON/OFF switch
Height and depth
adjustable brew unit
Hot water/
steam tube
Drip tray + grill
Cartridge filter
applicator
“Aqua Prima”
cartridge filter
Tray full indicator
TOUCH-SCREEN keys.
Dregs drawer
Brew group
Different commands are associated with
these keys depending on what appears
on the LCD display. A light finger pres-
sure will make the selected command
active; the command is then confirmed
by a sound signal.
Swivel base
LCD Display
28
INSTALLATION / VENTILATE
Important warning for using the “Aqua Prima Filter” can be found at
page 44.
The messages displayed by the machine during operation are shown
on pg.43.
See rating plate
Fill the coffee bean container
with coffee beans.
The “Aqua Prima” filter can
be installed (see pg.33).
Fill the tank with fresh drin-
king water.
Insert the plug into a sui-
table electric socket.
Move the ON/OFF switch
to “I” to turn on the
machine.
HOT WATER
VENTILATE
HOT WATER
VENTILATE
A message is displayed
indicating that the machine
circuit needs loading.
Place a container beneath
the steam tube.
Turn the knob countercloc-
kwise to start loading the
circuit.
Wait until a steady stream
of water flows out from the
nozzle.
A message is displayed
indicating that the machine
circuit has been loaded.
Note: You must load the circuit before starting
up the machine for the first time, if it has been
inoperative for a lengthy period or if the water
tank has been completely emptied. Moreover,
the circuit must be loaded every time the
message “VENTILATE” is displayed.
SELECT PRODUCT
READY FOR USE
Turn the knob clockwise
to terminate the circuit-
loading process.
Remove the container.
The machine is ready for
use.
29
ADJUSTMENTS
Adjustment may be made only while the coffee grinder is
operating.
Use coffee bean blends for espresso coffee makers. If you do not obtain
the desired result, try using different coffee blends. Store coffee in a cool
place, in a hermetically sealed container.
You will note a change after dispensing 1 - 2 coffees.
If you set the grinder on too fine a grind (knob turned all the way
anticlockwise) and the SBS control on “strong” (toward the right), coffee
may flow out in a slow trickle or not at all.
The fineness of the grind may be Coffee flows out more Coffee flows out more
adjusted using the knob. slowly. Press and turn. quickly. Press and turn.
BIG CUPS
COFFEE DOSE ADJUSTMENT - You must adjust the dose before dispensing coffee.
This adjustment will have an immediate effect on the coffee brewed.
To place the brew unit again in its position, pull it until it fits in.
SELECT PRODUCT
READY FOR USE
SELECT PRODUCT
READY FOR USE
SELECT PRODUCT
READY FOR USE
You can adjust the quantity
of coffee to be ground.
Stronger coffee.
Weaker coffee.
To use big cups, press the button and push the brew
unit until the end.
COFFEE IN CUPS
To adjust the strength and consistency of brewed coffee. The adjustment can also be made while
brewing the coffe. This adjustment will have an immediate effect on the coffee brewed.
To adjust the quantity of coffee dispensed to the size of your cups.
Place
a
cup beneath
the brew unit, press the
button corresponding
to the type of coffee
desired and keep it
pressed while coffee
is being dispensed.
Or
1 SMALL COFFEE
PROGRAM. QUANTITY
When the cup has
filled to the desired level, release the button; the machine is now
programmed to dispense the quantity of coffee you have chosen.
Café crème
Strong black coffee
Espresso coffee
30
DISPENSING COFFEE / HOT WATER
Warning! Hot water and steam may cause burns! Direct the steam tube toward the drip tray.
Before dispensing hot water, check on the display that the function has been selected.
Or
Or
SELECT PRODUCT
1 SMALL COFFEE
READY FOR USE
2 SMALL COFFEES
Make sure that the ma-
chine is ready.
Position
cup or cups beneath the
brew unit.
a
warm coffee
Press the button of the
type of coffee desired.
Once for 1 coffee
Twice for 2 coffees.
When the machine stops
making the coffee, remove
the cup or cups.
Or
SELECT PRODUCT
1 SMALL COFFEE
PREGROUND COFFEE
PREGROUND COFFEE
Position a warm coffee cup
beneath the brew unit.
Press the key one or
more times to select the
function.
Introduce ground coffee
using the coffee measure.
MAX 1 MEASURE
Press the button of the
type of coffee desired.
When the machine stops
making the coffee, remove
the cup.
Close the cover.
HOT WATER
SELECT PRODUCT
READY FOR USE
SELECT PRODUCT
READY FOR USE
Place a container beneath
the steam tube.
Press the button to
dispense water.
Turn the knob counter-
clockwise to start dispen-
sing. Close the knob when
finished.
Remove the container.
Press the button to restore
the machine to normal
operation.
31
STEAM / CAPPUCCINO
Warning! Hot water and steam may cause burns! Direct the steam tube toward the drip tray.
Before dispensing hot water, check on the display that the function has been selected.
SELECT PRODUCT
READY FOR USE
Fill a cup to 1/3 with cold
milk.
Check that the steam
function has been selected.
Place a container beneath
the steam tube. Open the
knob to discharge any
residual water.
When only steam comes
out, close the knob.
Remove the container.
Position the cup containing
milk beneath the steam
tube.
STEAM
Open the knob to release
steam. The machine will
signal the function
Move the cup in a circular
fashion to heat the milk
evenly.
After frothing the milk,
close the knob.
Remove the cup and
position it beneath the
brew unit
Dispense coffee into the
cup to prepare a delicious
cappuccino.
SELECT PRODUCT
READY FOR USE
STEAM
Open the knob to
discharge any residual
water. Close the knob.
Place the cup beneath the
steam tube.
Open the knob.
Heat by moving in circles.
Close the knob.
Remove the container.
32
DESCALING
Descaling is necessary every 3-4 months, when there is a reduction in the water
capacity. The machine must be on; it automatically controls the distribution of the
descaling solution.
Warning! Never use vinegar as a descaling agent. You can use any
commercially available non-toxic, non-harmful descaling product for coffee
machines. We recommend using a Saeco descaling agent.
MACHINE IS DESCALING
DECALCIFY
READY FOR USE
DESCALING
OPEN KNOB
The machine signals when Press the MENU button Remove the cartridge
Fill the water tank with the Place a large receptacle Turn the knob to open the
it needs descaling.
to access the descaling filter.
function.
See “Programming”.
descaling solution.
beneath the steam tube.
valve. The machine will
start descaling.
DESCALING FINISHED
CLOSE KNOB
RINSING FINISHED
CLOSE KNOB
MACHINE IS RINSING
RINSE MACHINE
FILL WATER TANK
RINSE MACHINE
PRESS KEY
When the descaling cycle is
completed, close the knob.
Rinse out the tank and fill it Press the button to confirm
with fresh drinking water. the rinse cycle.
Open the knob.
When the rinse cycle is
The machine will start completed, close the knob
rinsing.
and load the circuit
If the descaling cycle is
interrupted by switching off
the machine, it will automatically re-
sume when the machine is switched
back on.
MACHINE IS DESCALING
OPEN KNOB
DESCAL. INTERRUPTED
EMPTY WATER TANK
RINSE MACHINE
PRESS KEY
When descaling is over, fit the
cartridge filter back in place.
The descaling cycle can
be cut short by closing
the knob.
Press the button.
Rinse out the tank and fill it Press the button to confirm
with fresh drinking water.
the rinse cycle and proceed
normally.
33
“AQUA PRIMA” CARTRIDGE FILTER
The filter must be replaced when signalled by the machine.
See “Programming”.
Before descaling, remove the filter from the tank.
Remove the filter from the
packing container.
Adjust the dater to the
current month.
Insert the applicator and
turn it clockwise to secure
it to the filter.
Check where the filter
positioning and reference
mark is.
Put the filter into the empty
tank.
The reference must be
positioned in correspon-
dence with the groove.
SELECT PRODUCT
READY FOR USE
Press until the end limit.
Turn the applicator coun-
ter-clockwise and remove
it from the tank.
Fill the tank with fresh
drinkable water.
Position
beneath the steam tube
and turn the machine on.
a
container
Press the button to
dispense water.
It is possible to use the
machine without filter,
Saeco suggests its use.
If filter is not used, the
machine must be descaled
more frequently.
WATER FILTER
ON
OFF
RESET
Open the knob and
dispense water.
Empty the water tank out at
intervals.
When the tank is empty, fill
it again with fresh drinkable
water.
See “Programming”. Enable
the filter control function and
reset the water counter.
You can now use your
coffee machine.
34
CLEANING AND MAINTENANCE
Do not dry the machine and/or its components in a microwave and/or
conventional oven.
Do not immerge the machine in water and do not place any of its
components in a dishwasher.
Turn the machine off.
Unplug the machine.
Wash the water tank.
Wash the filter inside it.
Remove the drip tray, em-
pty it out and wash it.
Remove the dregs drawer,
empty it out and wash it.
Unscrew and clean the
“pannarello” attachment.
The machine, its components
and the brew unit must be
cleaned at least once a week.
Use the brush to clean the
ground coffee dispenser.
Remove the brew unit
and wash it with water.
Remove the grill. Open
the front door. Remove the
drawers.
Press the PUSH button to
release the brew group.
Unscrew the upper filter
and wash it.
Fit the filter back in place
when clean.
Wash the unit, dry it and
fit it back in place. Do not
press the “PUSH” button.
Set all machine components
back in position.
Close the door.
35
PROGRAMMING MACHINE FUNCTIONS
The user can change some machine operating parameters to suit his/her personal needs.
SETTINGS
SETTINGS
SELECT PRODUCT
READY FOR USE
CUP WARMER
RINSING
LANGUAGE
CUP WARMER
RINSING
LANGUAGE
ENERGY SAVING
SETTINGS
SETTINGS
Press the “MENU” With the highlighted The highlighted menu The secondary menus Use the “OK” button Press ESC to exit
button to access the buttons you can view item can be selected can be viewed/edited to select a menu or without making any
programming mode.
the main menus.
by pressing the “OK” with the highlighted confirm a change.
button. buttons.
changes.
When the appliance is used infrequently, it can be
switched to the STANDBY mode.
With this function you can cut energy costs.
SELECT PRODUCT
READY FOR USE
ENERGY SAVING
When the function ap- Machine in energy sa- Press the “ON” button
pears, select it using the ving mode.
“OK” button.
to restore the machine
to normal operation.
CUP WARMER
CUP WARMER
This function allows you to turn on the cup heater
present in the machine cover.
ON
OFF
ON
OFF
CUP WARMER
RINSING
LANGUAGE
SETTINGS
Select the MENU.
When the function ap-
pears, select it using the
“OK” button.
Choose whether you
wish to turn the cup
heater plate on or off.
Press the “OK” button
to confirm your choice.
36
PROGRAMMING MACHINE FUNCTIONS
When this function is enabled, the internal
machine circuits will be rinsed immediately after
RINSING
RINSING
SETTINGS
ON
OFF
ON
OFF
CUP WARMER
RINSING
LANGUAGE
the warming-up phase to ensure that coffee is
SETTINGS
prepared with fresh water only.
In all new appliances this function has already
been enabled in the factory.
Select the MENU.
When the function ap- From
this
menu Press the “OK” button to
pears, select it using you can disable the confirm your choice.
the “OK” button.
function.
This function allows you to change the display
language. You can choose among Italian,
German, Portuguese, Spanish, English, French,
Dutch, Polish and Swedish. The appliance is
usually programmed on the language of the
country in which it is sold.
LANGUAGE
LANGUAGE
SETTINGS
CUP WARMER
RINSING
LANGUAGE
ENGLISH
ESPANOL
PORTUGUES
ENGLISH
ESPANOL
PORTUGUES
SETTINGS
Select the MENU.
When the function ap- Select the desired lan- Press the “OK” button to
pears, select it using guage.
the “OK” button.
confirm your choice.
The hardness of tap water may vary depending on
the region. For this reason, the appliance can be
set according to the water hardness in the place
where it is to be used, expressed on a scale of 1
to 4. The appliance is factory set on a hardness
value of 3.
WATER HARDNESS
WATER HARDNESS
RINSING
LANGUAGE
WATER HARDNESS
1
2
3
4
1
2
3
4
The setting should be adjusted according to the
level of water hardness in the local area.
Dip the strip in water for When the function ap- Select the corresponding hardness
1 second. pears, select it using the (e.g. 2 squares = Hardness 2) and memorize the
Check how many squa- “OK” button.
res change colour.
value by pressing the “OK” button.
37
PROGRAMMING MACHINE FUNCTIONS
This function must be activated when the “Aqua
Prima” cartridge filter is installed for the first time.
The “RESET” command must be activated every
time a new cartridge filter is installed.
WATER FILTER
WATER FILTER
ON
OFF
RESET
ON
OFF
RESET
LANGUAGE
WATER HARDNESS
WATER FILTER
SETTINGS
This function enables optimal management of the
“Aqua Prima” filter as it warns the user when the
filter needs replacing.
Select the MENU.
When the function ap- From the menu it is Press the “OK” button to
pears, select it using possible to set the confirm your choice.
the “OK” button.
function to ON.
CONTRAST
CONTRAST
This function allows the user to adjust the display
contrast according to personal need.
WATER HARDNESS
WATER FILTER
CONTRAST
0
2
SETTINGS
Select the MENU.
When the function ap- From the menu it is Press the “OK” button to
pears, select it using possible to set the confirm your choice.
the “OK” button.
desired contrast.
This function enables/disables the acoustic signal
emitted by the machine. When the function is on,
the machine will emit an acoustic signal every
time a button is pressed.
ACOUSTIC SIGNAL
ACOUSTIC SIGNAL
ON
OFF
ON
OFF
WATER FILTER
CONTRAST
ACOUSTIC SIGNAL
SETTINGS
Select the MENU.
When the function ap- From the menu it is Press the “OK” button to
pears, select it using possible to set the confirm your choice.
the “OK” button.
function to ON.
38
PROGRAMMING MACHINE FUNCTIONS
With this function you can restore the machine
operating parameters originally set by the
FACTORY SETTINGS
FACTORY SETTINGS
SETTINGS
CONTRAST
ACOUSTIC SIGNAL
FACTORY SETTINGS
YES
NO
YES
NO
manufacturer. If you restore all the factory
SETTINGS
settings, all customized settings will be lost.
Select the MENU.
When the function ap- Choose whether to Press the “OK” button to
pears, select it using restore the initial confirm your choice:
the “OK” button.
factory settings.
With the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings
out the full aroma of the coffee and lends it an
excellent flavour. It is possible to choose either
“enabled”, or “disabled”, or “long”.
PREBREWING
PREBREWING
PREBREWING
TEMP. SMALL COFFEE
TEMP. MEDIUM COFFEE
ON
OFF
LONG
ON
OFF
LONG
COFFEE SETTINGS
When the function ap- Choose whether you Press the “OK” button
pears, select it using the wish to turn the pre- to confirm your choice.
Select the MENU.
“OK” button.
brewing function on
or off.
Users can adjust the temperature of small coffees
according to individual preferences: the possible
temperature settings are “low” – “medium” – “high”.
TEMP. SMALL COFFEE
TEMP. SMALL COFFEE
PREBREWING
TEMP. SMALL COFFEE
TEMP. MEDIUM COFFEE
MEDIUM
LOW
COFFEE SETTINGS
Select the MENU.
When the function ap-
pears, select it using the
“OK” button.
Select the desired Press the “OK” button
temperature. to confirm your choice.
39
PROGRAMMING MACHINE FUNCTIONS
Users can adjust the temperature of medium
coffees according to individual preferences: the
possible temperature settings are “low” – “medium”
– “high”.
TEMP. MEDIUM COFFEE
TEMP. MEDIUM COFFEE
COFFEE SETTINGS
PREBREWING
TEMP. SMALL COFFEE
TEMP. MEDIUM COFFEE
MEDIUM
LOW
COFFEE SETTINGS
Select the MENU.
When the function ap-
pears, select it using the
“OK” button.
Select the desired Press the “OK” button
temperature.
to confirm your choice.
Users can adjust the temperature of large coffees
according to individual preferences: the possible
temperature settings are “low” – “medium” – “high”.
TEMP. LARGE COFFEE
TEMP. LARGE COFFEE
TEMP. SMALL COFFEE
TEMP. MEDIUM COFFEE
TEMP. LARGE COFFEE
MEDIUM
LOW
COFFEE SETTINGS
Select the MENU.
When the function ap-
pears, select it using the
“OK” button.
Select the desired Press the “OK” button
temperature.
to confirm your choice.
For setting, when the machine is switched on, the
quantity of coffee to be ground in order to brew the
desired coffee.
AROMA PRESELECTION
AROMA PRESELECTION
TEMP. MEDIUM COFFEE
TEMP. LARGE COFFEE
AROMA PRESELECTION
MILD
NORMAL
STRONG
MILD
NORMAL
STRONG
COFFEE SETTINGS
See “Settings” on page 29.
Select the MENU.
When the function ap-
pears, select it using the
“OK” button.
Select the desired Press the “OK” button
quantity of coffee. to confirm your choice.
40
PROGRAMMING MACHINE FUNCTIONS
SHOW CLOCK TIME
SHOW CLOCK TIME
TIME SETTINGS
The machine offers the option of displaying the
current time in certain phases of operation.
YES
NO
YES
NO
SHOW CLOCK TIME
CLOCK TIME
CLOCK
TIME SETTINGS
Select the MENU.
When the function ap- From the menu it is Press the “OK” button to
pears, select it using possible to set the confirm your choice.
the “OK” button.
function to ON.
CLOCK TIME
CLOCK TIME
TIME SETTINGS
This function is for setting the current time.
SHOW CLOCK TIME
CLOCK TIME
CLOCK
8: 25
8: 25
TIME SETTINGS
Select the MENU.
When the function ap- Set the hour using the Set
the
minutes
pears, select it using buttons and memorise using the buttons and
the “OK” button.
by pressing “OK”.
memorise by pressing
“OK”.
This function enables/disables the clock. When the
function is on, the machine will switch on and off
at the times programmed via the “ON/OFF TIME”
function.
CLOCK
CLOCK
TIME SETTINGS
ON
OFF
ON
OFF
SHOW CLOCK TIME
CLOCK TIME
CLOCK
TIME SETTINGS
Select the MENU.
When the function ap- From the menu it is Press the “OK” button to
pears, select it using possible to set the confirm your choice.
the “OK” button.
function to ON.
41
PROGRAMMING MACHINE FUNCTIONS
This function, which may be enabled or disabled
by the user, is used to program the machine to go
on and off at a specific time.
ON/OFF TIME
ON
ON/OFF TIME
TIME SETTINGS
CLOCK TIME
CLOCK
ON/OFF TIME
ON
08 : 25
08 : 25
09 : 45
OFF
TIME SETTINGS
ON: indicates the switch on time.
OFF: indicates the switch off time.
Pressing the “OK” button will memorise the set
value and make the next parameter available for
adjustment.
Select the MENU.
When the function ap- Set the hour and Set the hour and
pears, select it using minutes and memorise minutes and memorise
the “OK” button.
by pressing “OK”.
by pressing “OK”.
This is a factory-set function that automatically
switches the machine into “Standby” when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the “CLOCK”
function is on.
TIMER
TIMER
TIME SETTINGS
CLOCK
ON/OFF TIME
TIMER
3:00
1:15
TIME SETTINGS
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
Select the MENU.
When the function ap- Use the buttons to Press the “OK” button to
pears, select it using the adjust the timer setting. confirm your choice.
“OK” button.
This function is used to rinse all the coffee-
dispensing parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
CLEANING CYCLE
CLEANING CYCLE
CLEANING
YES
NO
YES
NO
CLEANING CYCLE
DESCALING CYCLE
CLEANING
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
Select the MENU.
When the function ap- Choose whether to
pears, select it using enable or disable the
Press the “OK” button
to confirm your choice.
the “OK” button.
rinsing cycle.
42
PROGRAMMING MACHINE FUNCTIONS
DESCALING CYCLE
DESCALING CYCLE
This function is used to carry out an automatic
descaling cycle. See Page 32.
A person must be present during this operation.
CLEANING
YES
NO
YES
NO
CLEANING CYCLE
DESCALING CYCLE
CLEANING
Select the MENU.
When the function ap- Choose whether to
pears, select it using the enable or disable the
Press the “OK” button to
confirm your choice.
“OK” button.
descaling cycle.
TOTAL COFFEES
TOTAL COFFEE
This function enables the user to see how many
coffees the machine has already dispensed.
TOTAL COFFEES
EXTRAS
Select the MENU.
When the function ap-
pears, select it using
the “OK” button.
The display will show Press “ESC” to exit the
the number of coffees menu.
the machine has
dispensed.
43
DISPLAY MESSAGES
CLOSE DOOR
VENTILATE
Load the machine circuit.
Close the front door.
DREGDRAWER MISSING
FILL WATERTANK
Fill the water tank with fresh drinking water.
Fit the drip tray and dregs drawer properly in place.
DREGDRAWER FULL
Open the door, remove the dregs drawer and empty the
used coffee grinds into a suitable container.
Important note: the dregs drawer may be emptied
only when the machine is on. The drawer must be
removed for at least 5 seconds. If you empty the
drawer with the machine off, you will not be able
to dispense coffee the next time you switch the
machine on.
COFFEE BEANS EMPTY
READY FOR USE
Fill the coffee bean container and start the coffee
dispensing cycle.
BREWUNIT MISSING
DECALCIFY
READY FOR USE
Fit the brew unit properly in place.
Descale the machine
44
DISPLAY MESSAGES- NOTES ON THE AQUA PRIMA CARTRIDGE FILTER
Replace the “Aqua Prima” filter as soon as possible;
should not a new filter be available, remove the existing
one, and deactivate the “Water Filter” function (See Pro-
gramming).
REPLACE WATER FILTER
READY FOR USE
Press “ON”
BREWUNIT BLOCKED
Contact an authorised service centre.
ADDITIONAL INFORMATION FOR CORRECTLY USING THE “AQUA PRIMA”
FILTER.
Please follow these simple instructions to correctly use the “Aqua prima” filter:
1. Keep the “Aqua prima” filter cool and away from sunlight; the room temperatu-
re should be between +5°C and +40°C;
2. Do not use the filter in temperatures over 60°C.
3. If the coffee machine is not used for 3 days, we recommend washing the
“Aqua prima” filter;
GRINDER BLOCKED
Contact an authorised service centre.
4
If the coffee machine is not used for more than 20 days, it is advisable to
replace the filter.
5. To store an already opened filter, seal it in a nylon bag and keep in the fridge;
do not store it in the freezer to avoid damaging the filter properties.
6. Before using the filter, leave it to soak in the water tank for 30 minutes.
7. Once it is taken out of its pack, do not keep the filter in the open air.
8. The filter must be replaced 90 days after opening the packing or after treating
60 litres of drinking water.
RINSING
WARMING UP. . .
The machine is in the heating phase; wait until the machi-
ne has finished this operation.
45
PROBLEMS - CAUSES - REMEDIES
PROBLEMS
CAUSES
REMEDIES
PROBLEMS
CAUSES
REMEDIES
The machine does not The machine is not Move the main switch to ON.
Coffee flows out in Excessively fine grind
slow trickle or not
at all.
Adjust to a coarser grind (turn
the knob clockwise).
turn on.
connected to the power
supply.
Check the plug and the
connection
The coffee is not hot The cups are cold.
enough.
Warm up the cups.
A low temperature has Set the machine on a higher
been set. temperature.
and SBS control turned to Turn the SBS control toward
the right. the left.
Only
water
is No preground coffee has Dispense
again
after
dispensed when you been introduced.
introducing preground coffee.
select
coffee”.
“preground
No hot water or steam The tube nozzle is Clean the nozzle opening
is dispensed. clogged. with a needle.
During this ope-
ration, the knob must
be closed and the machine
must be off.
The machine takes a Excessive scale has Descale the machine.
long time to warm up. built up.
The brew unit cannot The unit has stopped in Close the door and switch on
be removed.
the wrong position.
the machine; the brew unit
will move back into position.
Saeco International Group S.p.A. - Via Panigali, 39
40041 Gaggio Montano - Bologna - Italy
|