Rosewill R7229 User Manual

ATX Computer Case R7229  
User Manual  
ATX Computer Case R7229  
Chapter 1: Introduction  
Mechanical Drawing:  
User Manual  
2
ATX Computer Case R7229  
User Manual  
Specifications:  
Dimensions  
M/B Type  
200mm(W) x 430mm(H) x 480mm(D)  
ATX 12” x 9.6” (30.5cm x 24.5 cm); Micro-ATX  
SECC Metal 0.8cm  
Material  
5.25” Drive Bay  
3.5” Drive Bay  
I/O Panel  
5 (Exposed)  
2 (Exposed); 5 (Hidden)  
USB2.0 x 2; MIC x 1; SPK x 1  
One 80mm rear fan ( Exhaust )  
Standard ATX PS2, 350W  
7 slots  
Cooling System  
Power Supply  
Expansion slot  
Chapter 2: Installation  
Removing and installing side panels  
1.  
2.  
Loosen the thumb screws from the back and pull the side panel backward to remove it.  
Fit the hooks of the panel to the elongated holes on the edges of casing, and slide the  
panel toward and secure with screws to install the panel.  
3
ATX Computer Case R7229  
User Manual  
Installing the Motherboard  
1.  
Installing the IO panel that comes with Motherboard package.  
2.  
Aiming at the holes on the Motherboard, and secure the copper posts (stand off) on  
Motherboard plate.  
3.  
Align the holes of PCB and Motherboard plate, and secure them by fastening screws to  
the cooper posts.  
Install add-on card  
1.  
Pressing the slot cover and bend forward and  
backward to remove it.  
2.  
3.  
Insert the add-on card.  
Secure the add-on card with screws.  
4
ATX Computer Case R7229  
User Manual  
Installing Drives (CD/DVD ROM, FDD and HDD)  
1.  
Detach the front panel from the casing by pressing the clips that on the rear side of front  
panel.  
2.  
3.  
Remove the metal cover of the bay.  
Insert the device in place; and secure with screws.  
Replacing the power device  
1.  
2.  
Loosen the screws to remove the power supply.  
Place the power supply on the power rack with the wiring end facing forward and connect  
it to the back of the casing.  
3.  
Secure the power supply device with screws.  
5
ATX Computer Case R7229  
User Manual  
Replacing/Installing the Case Fan  
Change the Front Fan  
1.  
2.  
Loosen the fan screws from the rear casing, and remove the fan.  
Install the new fan and secure it with screws.  
I/O Function Panel Installation Guide  
Please refer to the illustration on the section of USB2.0 and Audio connector from the  
motherboard user’s manual.  
The following illustration is a connection diagram for the front panel I/O cable.  
Please check with your motherboard manual before installing.  
6
ATX Computer Case R7229  
User Manual  
Thank you for purchasing Rosewill Product.  
support for your product.  
7

Spirit 1776 User Manual
Sony ICF CD843L User Manual
Sony Ericsson T60LX User Manual
Sony 76 User Manual
SanDisk SDUFD2AB 512 User Manual
Samsung SGH i320 User Manual
Samsung GT E1170 User Manual
Samsung Cell Phone GT I9300 User Manual
Radio Shack 04A01 User Manual
Philips AJ3010 User Manual