Insert AAA batteries in the base of the radio
Set up the radio
1. NOTE: When you turn on the radio for the first time,
it will be in “DEMO” mode. To exit this mode, press
preset 1, then SLEEP/SNOOZE, then preset 6 on
top of the radio.
3
6
QuickStartGuide
RIR200
Use the navigation controls to make
choices and input information:
Follow the polarity markers in the battery
compartment.
Congratulations on purchasing your new RCA Wi-Fi Internet Radio.
Please follow these instructions to set up and start using the radio.
The batteries (not included) power the
clock and alarm whenever the radio loses
electricity.
2. After exiting the DEMO
mode, the radio displays
the Select Language
screen. Choose your
Unpack the unit
You should find the following items in the box:
1
− move highlight up
preferred language.
– move highlight down
– move selection/navigate left
– move selection/navigate right
SELECT - confirm selected option or
character
3. The Internet Setup screen
then displays:
•
Connecting via Ethernet
–
In the Internet Setup screen,
choose Wired. The radio
When inputting characters, press or
to choose among uppercase, lowercase,
numeric, or special characters.
To insert spaces or correct mistakes, press
to display the Commands list and then
should then connect to the Internet.
Connecting via wireless
In the Internet Setup screen, choose Wireless.
To display a list of available networks, choose
Detect Networks, then choose your network.
To use a known network SSID, choose Enter SSID
and then input your SSID.
•
–
–
Optional: Connect the radio using an Ethernet cable
Use an Ethernet cable if you do not have a Wi-Fi access point.
4
press or
command.
to choose the desired
Radio
Power adapter
AM loop antenna
Ethernet cable
–
N
A
L
Quick Start
Guide (this
leaflet)
About passphrase:
Setup
Information
Card
LAN
•
This radio supports secured access
points using the Wireless Equivalent
Privacy (WEP) keys or Wi-Fi Protected
Access (WPA and WPA2) standards.
WEP keys are either 10 or 26
characters long (e.g. 6e78214a52).
Some access points for WEP
support passphrases (e.g. changing
entertainment again) which do not
conform to the industry standard and
are not supported in this radio.
If you are using a WEP secured access
point, enter the WEP key (HEX format)
instead of the passphrase.
3. If the network is secure, enter your password in
the Network Security screen. The radio should then
connect to the Internet.
Broadband modem or
Ethernet router/hub/switch
•
Press to show “DONE”
and SELECT to confirm.
LAN
Additional requirements
•
•
•
Broadband Internet service
Broadband (cable/DSL) modem, usually supplied by your Internet service provider
An 802.11 b or g (Wi-Fi) wireless home network or Ethernet router/switch/hub with available
LAN port
Press
or
to highlight,
SELECT to confirm.
•
After connecting to the Internet
Plug in and turn on the radio
For Wi-Fi connections, you may also need:
•
If you did not activate your Infinite Radio accounts,
or if the radio cannot get your details from the
5
•
•
Your wireless network’s SSID
Your access password (for secure networks)
Infinite Radio server, the radio may ask for your ZIP code. Input your code.
Electrical outlet
!
Setup your RCA Infinite Radio accounts
2
To simplify setup and avoid manual configuration on the radio please complete these steps:
•
If your radio has successfully connected to the Internet you will hear a welcome message.
1. Find the Setup Information Card that contains your radio’s MAC address number (MAC:
00-00-00-00-00-00) and activation PIN # (PIN: 0000). (This number is also found in the Device
Info screen under the Settings menu in your radio.)
Learn more about your Internet Radio
Read the user manual (download from www.rcainfiniteradio.com) for more information on the
player’s features, safety and warranty information, and answers to Frequently Asked Questions (FAQ’s).
Deactivate the DEMO mode
after turning on
the online instructions.
•
You will need to input your radio’s MAC address and PIN # to associate your radio with your
personal settings.
Press preset 1, then SLEEP/
SNOOZE, then preset 6.
Need more help?
Do not return this product to the store.
v1.0 (EN)
|