High power CD player with RDS tuner
Operation Manual
DEH-2330R
DEH-2300R
DEH-2300RB
DEH-1330R
DEH-1300R
Key Finder
Head Unit
+/– buttons
LOCAL/BSM button
EQ button
CD loading slot
EJECT button
AUDIO button
BAND button
TA button
Detach button
5/∞/2/3 buttons
PTY button
Buttons 1–6
SOURCE button
2
Before Using This Product
About This Product
•
This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in improper reception. The
RDS function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by
reading through the manual before you use this product. It is especially important that you
read and observe the “Precaution” on the next page and in other sections.
3
Precaution
• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
• The Pioneer CarStereo-Pass is for use only in Germany.
• Keep this manual handy as a reference for operating procedures and precautions.
• Always keep the volume low enough for outside sounds to be audible.
• Protect this product from moisture.
• If the battery is disconnected, the preset memory will be erased and must be repro-
grammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized
Pioneer Service Station.
4
Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
•
Loading a disc in this product. (Refer to page 7.)
1. Select the desired source (e.g. Tuner).
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order:
Built-in CD player = Tuner
Note:
•
•
When no disc is set in this product, built-in CD player source will not change.
When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,
switch the source OFF.
2. Raise or lower the volume.
3. Turn the source OFF.
Hold for 1 second
5
Basic Operation of Tuner
This product’s AF function can be switched ON and OFF. AF should be switched OFF for
normal tuning operations. (Refer to page 10.)
Manual and Seek Tuning
• You can select the tuning method by changing the length of time
you press the 2/3 button.
Manual Tuning (step by step)
0.5 seconds or less
0.5 seconds or more
Seek Tuning
Note:
•
If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast
stations. Seek Tuning starts as soon as you release the button.
•
Stereo indicator “” lights when a stereo station is selected.
Frequency Indicator
Preset Number Indicator
Band Indicator
Preset Tuning
Band
F1 (FM1)
• You can memorize broadcast stations in buttons 1
through 6 for easy, one-touch station recall.
= F2 (FM2)
= MW/LW
Preset station recall
2 seconds or less
2 seconds or more
Broadcast station preset memory
Note:
•
Up to 12 FM stations (6 in F1 (FM1) and F2 (FM2)) and 6 MW/LW
stations can be stored in memory.
•
You can also use the 5 or ∞ buttons to recall broadcast stations
memorized in buttons 1 through 6.
6
Basic Operation
Basic Operation of Built-in CD Player
Eject
Note:
•
CD Loading Slot
The CD function can be turned ON/OFF
with the disc remaining in this product.
(Refer to page 5.)
A disc left partially inserted after ejec-
tion may incur damage or fall out.
Note:
•
The built-in CD player plays one standard 12 cm
or 8 cm (single) CD at a time. Do not use an
adapter when playing 8 cm CD.
•
•
Don’t insert any materials except for CD into
CD loading slot.
Play Time Indicator
Track Number Indicator
Track Search and Fast Forward/Reverse
• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search
0.5 seconds or less
Fast Forward/Reverse
Continue pressing
Note:
•
If a disc cannot be inserted fully or playback fails, make sure the recorded side is down.
Push the EJECT button and check the disc for damage before reinserting it.
•
•
If a disc is inserted with the recorded side up, it will be ejected automatically after a few moments.
If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”)
appears on the display. Refer to “Built-in CD Player’s Error Message” on page 27.
7
Tuner Operation
Local Seek Tuning
This function selects only stations with especially strong signals.
• Switch the Local ON/OFF
with the LOCAL/BSM button.
“LOC”
Best Stations Memory (BSM)
The BSM function stores stations in memory automatically.
• Press the LOCAL/BSM but-
ton for 2 seconds to switch
BSM ON.
The stations with the strongest sig-
nals will be stored under buttons
1–6 and in order of their signal
strength.
• To cancel the process, press the LOCAL/BSM button before memorization is
complete.
8
Using RDS Functions
What is RDS?
RDS (Radio Data System) is a system for transmitting data along with FM programs. This
data, which is inaudible, provides a variety of features such as: program service name, pro-
gram type display, traffic announcement standby, automatic tuning and program type tun-
ing, intended to aid radio listeners in tuning to a desired station.
Note:
•
•
RDS service may not be provided by all stations.
RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby),
are only active when your radio is tuned to RDS stations.
Program Service Name Display
With this function, the names of networks/stations providing RDS services replace the fre-
quency on the display a few seconds after they are tuned in.
• When you want to know PTY Information or the frequency of the current
station, change the display.
Hold for 2 seconds
Each press of the EQ button for 2 seconds selects the display in the following order:
Program Service Name = PTY Information = Frequency
Note:
•
After switching displays, if you do not perform an operation within 8 seconds, the Program Service
Name is automatically displayed.
7 PTY Information
PTY (Program Type ID code) information for the currently tuned station appears on the
display for 8 seconds. The information is correlated with the list in the section “PTY
Function” on page 14.
Note:
•
If a PTY code of zero is received from a station, “NONE” will be displayed. This indicates that the
station has not defined its program contents.
•
If the signal is too weak for this product to pick up the PTY code, “NO PTY” will be displayed.
7 Frequency
The frequency of the current station appears on the display.
9
AF Function
The AF (Alternative Frequencies search) function is used to search for other frequencies in
the same network as the currently tuned station. It automatically retunes the receiver to
another frequency in the network which is broadcasting a stronger signal when there are
problems with reception of the currently tuned station or better reception is possible on
a different frequency.
Note:
•
AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with
the “AF ” indicator ON.
•
When you recall a preset station, the tuner may update the preset station with a new frequency from
the station’s AF list. (This is only available when using presets on the FM1 band.) No preset num-
ber appears on the display if the RDS data for the station received differs from that for the original-
ly stored station.
•
•
•
Sound may be temporarily interrupted by another program during an AF frequency search.
When the tuner is tuned to a non-RDS station, the “AF ” indicator flashes.
AF can be switched ON or OFF independently for each FM band.
Activating/Deactivating the AF Function
AF is set to ON by default.
• Turn AF to OFF.
Hold for 2 seconds
“AF ” disappears
To turn AF back ON, repeat the preceding operation.
10
Using RDS Functions
PI Seek Function
The tuner searches for another frequency broadcasting the same programming. “PI SEEK”
appears on the display and the radio volume is muted during a PI Seek. The muting is discon-
tinued after completion of the PI Seek, whether or not the PI Seek has succeeded. If the PI Seek
is unsuccessful, the tuner returns to the previous frequency.
PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is
too weak for proper reception, the PI Seek will automatically start.
Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances, this product can
be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
Note:
•
Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.
Regional Function
When AF is used to retune the tuner automatically, REG (regional) limits the selection to
stations broadcasting regional programs.
Note:
•
•
•
Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
The preset number may disappear on the display if the tuner tunes in a regional station which dif-
fers from the originally set station.
REG can be switched ON or OFF independently for each FM band.
Activating/Deactivating the REG Function
The REG function is set to ON by default.
• Turn REG to OFF.
Hold for 2 seconds
To turn REG back ON, repeat the preceding operation.
11
TA Function
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source you are listening to. The TA function can be activat-
ed for either a TP station (a station that broadcasts traffic information) or an EON TP sta-
tion (a station carrying information which cross-references TP stations).
Activating/Deactivating the TA Function
1. Tune in a TP or EON TP station.
The “TP” indicator lights when the tuner is tuned to a TP station or an EON TP station.
2. Activate the TA function.
“TA”
The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deacti-
vate the TA function.
Note:
•
•
The system switches back to the original source following traffic announcement reception.
The TA function can be activated from sources other than tuner if the tuner was last set to the FM
band but not if it was last set to the MW/LW band.
•
•
•
If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions
while listening to sources other than tuner.
Only TP or EON TP stations are tuned in during the Seek Tuning mode when the “TA” indicator is
ON.
Only TP or EON TP stations are stored by BSM when the “TA” indicator is ON.
12
Using RDS Functions
Canceling Traffic Announcements
• Press the TA button while a traffic announcement is being received to cancel
the announcement and return to the original source.
The announcement is canceled but the tuner remains in the TA mode until the TA button is
pressed again.
Adjusting the TA Volume
When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
• Set the volume by adjusting it during reception of a traffic announcement.
The newly set volume is stored in memory and recalled for subsequent traffic announce-
ments.
TP Alarm Function
About 30 seconds after the “TP” indicator is extinguished due to a weak signal, a 5 second
beep sounds to remind you to select another TP or EON TP station.
• If you are listening to the tuner, tune in another TP station or EON TP sta-
tion.
In sources other than tuner, the tuner automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)* seconds after “TP” disappears from the dis-
play.
* Time taken before Seek begins.
TA function ON
10 seconds
30 seconds
TA, AF functions ON
13
PTY Function
The PTY function enables you to select stations by the type of programming they broad-
cast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY
Alarm).
Note:
• PTY code program types are as follows:
1. NEWS:
2. AFFAIRS:
3. INFO:
News.
Current affairs.
General information and advice.
Sports programs.
4. SPORT:
5. EDUCATE: Educational programs.
6. DRAMA: All radio plays and serials.
7. CULTURE: Programs concerned with any aspect of national or regional culture.
8. SCIENCE:
9. VARIED:
10. POP MUS:
Programs about nature, science and technology.
Light entertainment programs.
Popular music.
11. ROCK MUS: Contemporary modern music.
12. EASY MUS: Easy listening music.
13. L. CLASS:
14. CLASSIC:
15. OTH MUS:
Light classical music.
Serious classical music.
Other types of music, which can’t be categorized.
16. WEATHER: Weather reports/Meteorological information.
17. FINANCE: Stock market reports, commerce, trading etc.
18. CHILDREN: Children’s programs.
19. SOCIAL: Social affairs programs.
20. RELIGION: Religion affairs programs or services.
21. PHONE IN: Phone in based programs.
22. TOURING:
23. LEISURE:
24. JAZZ:
Travel programs, not for announcements about traffic problem.
Programs about hobbies and recreational activities.
Jazz music based programs.
25. COUNTRY: Country music based programs.
26. NAT MUS:
27. OLDIES:
National music based programs.
Oldies music, ‘Golden age’ based programs.
28. FOLK MUS: Folk music based programs.
29. DOCUMENT: Documentary programs.
14
Using RDS Functions
PTY Search Setting Function
1. Enter the PTY Search setting mode.
Hold for 2 seconds
The name of a program type appears on the display for 5 seconds.
Note:
•
“CURRENT” sets desired PTY to the program type of the current station (only for RDS stations
broadcasting PTY information).
2. Select one of the PTYs.
3. When the desired programming type appears on the display, return to the
normal display.
15
PTY Search Function
• Initiate a PTY search.
The tuner searches for a station broadcasting the desired PTY.
Note:
•
•
The program of some stations may differ from that indicated by the transmitted PTY.
If no station broadcasting the selected programming type is found, “NOTFOUND” is displayed for
about 2 seconds, and the tuner returns to the original station.
PTY Alarm
PTY Alarm is a special PTY code for announcements regarding emergencies such as nat-
ural disasters. When the tuner receives the radio alarm code, “ALARM” appears on the
display and the volume adjusts to the TA volume. When the station stops broadcasting the
emergency announcement, the system returns to the previous source.
Note:
•
The system switches back to the original source following emergency announcement reception.
Canceling Emergency Announcements
• Press the TA button during emergency announcement reception to cancel
the announcement and return to the previous source.
16
Using the Built-in CD Player
Repeat Play
Repeat Play plays the same track repeatedly.
• Switch the Repeat Play
ON/OFF with the button 5.
Note:
•
If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled.
Random Play
Random Play plays the tracks on a disc in random order for variety.
• Switch the Random Play
ON/OFF with the button 4.
Scan Play
Scan Play plays the first 10 seconds or so of each track on a disc in succession.
1. Switch the Scan Play ON with
the button 3.
2. When you find the desired
track, cancel the Scan Play
with the button 3.
Note:
•
Scan Play is canceled automatically after all the tracks on a disc have been scanned.
Pause
Pause pauses the currently playing track.
• Switch the Pause ON/OFF
with the button 6.
17
Audio Adjustment
Selecting the Equalizer Curve
You can switch between Equalizer curves.
• Press the EQ button to select the desired Equalizer curve.
Equalizer curve
POWERFUL (powerful) = NATURAL (natural) = VOCAL (vocal)
= CUSTOM (custom) = EQ FLAT (flat) = SPR–BASS (super bass)
Note:
•
“CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Equalizer Curve
Adjustment” on page 20.)
Entering the Audio Menu
With this Menu, you can adjust the sound quality.
Note:
•
After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the
Audio Menu is automatically canceled.
1. Select the desired mode in the Audio Menu.
Each press changes the Mode ...
2. Operate a mode.
3. Cancel the Audio Menu.
18
Audio Adjustment
Audio Menu Functions
The Audio Menu features the following functions.
Balance Adjustment (FAD)
This function allows you to select a Fader/Balance setting that provides ideal listening con-
ditions in all occupied seats.
1. Press the AUDIO button and select the Fader/Balance mode (FAD) in the
Audio Menu.
2. Adjust front/rear speaker bal-
5 ∞
/
ance with the
buttons.
“FAD F15” – “FAD R15” is dis-
played as it moves from front to
rear.
3. Adjust left/right speaker bal-
ance with the 2/3 buttons.
“BAL L9” – “BAL R9” is displayed
as it moves from left to right.
Note:
•
“FAD 0” is the proper setting when 2 speakers are in use.
19
Equalizer Curve Adjustment (EQ-L/EQ-M/EQ-H)
You can adjust the currently selected equalizer curve settings as desired. Adjusted
equalizer curve settings are memorized in “CUSTOM”.
1. Press the AUDIO button and select the Equalizer mode (EQ-L/EQ-M/EQ-H)
in the Audio Menu.
2. Select the band you want to
adjust with the 2/3 buttons.
EQ-L (low) += EQ-M (mid)
+= EQ-H (high)
3. Boost or attenuate the selected
band with the 5/∞ buttons.
The display shows “+6” – “–6”.
“CUSTOM”
Note:
•
If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve
will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears on the display
while selecting the equalizer curve. (Refer to page 18.)
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at
low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio
Menu.
2. Switch the Loudness function
ON/OFF with the 5/∞ but-
tons.
“LOUD
”
3. Select the desired level with
the 2/3 buttons.
LOW (low) += MID (mid)
+= HI (high)
20
Audio Adjustment
Front Image Enhancer Function (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging
by cutting mid- and high-range frequency output from the rear speakers, limiting their out-
put to low-range frequencies. You can select the frequency you want to cut.
Precaution:
•
When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just
bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.
1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio
Menu.
2. Switch the F.I.E. function
ON/OFF with the 5/∞ but-
tons.
3. Select the desired frequency
with the 2/3 buttons.
100 += 160 += 250 (Hz)
Note:
•
After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and
adjust front and rear speaker volume levels until they are balanced.
•
Switch the F.I.E. function OFF when using a 2-speaker system.
Source Level Adjustment (SLA)
The SLA (Source Level Adjustment) function prevents radical leaps in volume level when
switching between sources. Settings are based on the FM volume, which remains
unchanged.
1. Compare the FM volume with the volume of the other source.
(e.g. Built-in CD player)
2. Press the AUDIO button and select the SLA mode (SLA) in the Audio Menu.
3. Increase or decrease the level
with the 5/∞ buttons.
The display shows “+4” – “–4”.
Note:
•
•
Since the FM volume is the control, SLA is not possible in the FM modes.
The MW/LW volume level, which is different from the FM base setting volume level, can also be
adjusted similar to sources other than tuner.
21
Detaching and Replacing the Front Panel
Theft Protection
The front panel of the head unit is detachable to discourage theft.
Detaching the Front Panel
1. Eject the front panel.
2. To remove the front panel,
pull its right-hand side
toward you.
Take care not to grip it tightly or
drop it.
3. Use the protective case pro-
vided to store/carry the
detached front panel.
Replacing the Front Panel
• Replace the front panel by
clipping it into place.
Precaution:
•
•
•
Never use force or grip the display tightly when removing or replacing the front panel.
Avoid subjecting the front panel to excessive shocks.
Keep the front panel out of direct sunlight and high temperatures.
22
Initial Setting
Entering the Initial Setting Menu
With this menu, you can perform initial settings for this product.
1. Switch the source OFF.
2. Enter the Initial Setting Menu.
Hold for 2 seconds
3. Select a desired mode.
Each press changes the Mode ...
4. Operate a mode.
5. Cancel the Initial Setting Menu.
Note:
•
Holding down the AUDIO button for 2 seconds also cancels the Initial Setting Menu.
23
Initial Setting Menu Functions
The Initial Setting Menu features the following functions.
Changing the FM Tuning Step (STEP)
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Press the AUDIO button and select the FM Tuning Step mode (STEP) in the
Initial Setting Menu.
2. Select the desired tuning step
with the 2/3 buttons.
Note:
•
•
The tuning step remains set at 50 kHz during Manual tuning.
The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Switching the Auto PI Seek (A-PI)
During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to “PI Seek Function” on page 11.)
1. Press the AUDIO button and select the Auto PI Seek mode (A-PI) in the
Initial Setting Menu.
2. Switch the Auto PI Seek
ON/OFF with the 5/∞ buttons.
24
Other Functions
Cellular Telephone Muting
Sound from this system is muted automatically when a call is made or received using a
cellular telephone connected to this product.
• The sound is turned off, “MUTE” is displayed and no audio adjustment is possible.
Operation returns to normal when the phone connection is ended.
25
CD Player and Care
Precaution
• Play only CDs bearing the Compact Disc Digital
Audio mark.
• This product is designed for use with conventional,
fully circular CDs only. Use of shaped CDs are not
recommended for this product.
• Check all CDs before playing and discard cracked, scratched or warped discs.
• Normal playback of CD-R discs other than those recorded with a music CD recorder
may not be possible.
• Playback of music CD-R discs, even those recorded with a music CD recorder, may not
be possible with this product due to disc characteristics or scratches or dirt on the disc.
Dirt or condensation on the lens inside this product may also prevent playback.
• Titles and other text information recorded on a CD-R disc may not be displayed by this
product.
• Read the precautions with the CD-R discs before using.
• Wipe dirty or damp discs outward from the center
with a soft cloth.
• Avoid touching the recorded (iridescent) surface when handling discs.
• Store discs in their cases when not in use.
• Keep discs out of direct sunlight and high temperatures.
• Do not affix labels or apply chemicals to discs.
• Condensation may collect inside the player when using the heater in cold weather, inter-
fering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth.
• Road shocks may interrupt CD playback.
26
CD Player and Care
Built-in CD Player’s Error Message
When problems occur with CD playback, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the
error persists, contact your dealer or your nearest PIONEER Service Center.
Message
Possible cause
Dirty disc.
Recommended action
Clean the disc.
ERROR- 11, 12, 17, 30
ERROR- 11, 12, 17, 30
ERROR- 14
Scratched disc.
Unrecorded CD.
Replace the disc.
Check the disc.
ERROR- 10, 11, 12, 14,
17, 30, A0
Electrical or mechanical
problem.
Turn the ignition ON and OFF, or
switch to a different source, then back
to the CD player.
HEAT
CD player overheating.
Discontinue play until the machine
temperature drops.
27
Specifications
General
CD player
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format...................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
(mounting size) ...... 178 (W) ´ 50 (H) ´ 159 (D) mm
(front face) .............. 188 (W) ´ 58 (H) ´ 19 (D) mm
Weight ...................................................................... 1.4 kg
Frequency characteristics................ 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ........ 94 dB (1 kHz) (IEC-A network)
Dynamic range ............................................ 92 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
Amplifier
Maximum power output
FM tuner
(DEH-2330R, DEH-2300R,DEH-2300RB)
...................................................................... 50 W ´ 4
(DEH-1330R, DEH-1300R) ........................ 45 W ´ 4
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity
.................... 9 dBf (0.8 mV/75 W, mono, S/N: 30 dB)
50 dB quieting sensitivity .... 15 dBf (1.5 mV/75 W, mono)
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Continuous power output
(DEH-2330R, DEH-2300R,DEH-2300RB)
...................................................................... 27 W ´ 4
(DEH-1330R, DEH-1300R) ........................ 25 W ´ 4
(DIN45324, +B = 14.4 V)
MW tuner
Load impedance .......................... 4 W (4 – 8 W allowable)
Preout maximum output
level/output impedance ............................ 2.2 V/1 k½
Equalizer (3-Band Equalizer)
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 mV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
(Low) .................................................. Level: ±12 dB
(Mid) .................................................... Level: ±12 dB
(High) .................................................. Level: ±12 dB
Loudness contour
LW tuner
Frequency range ........................................ 153 – 281 kHz
Usable sensitivity .............................. 30 mV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
Note:
•
Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
28
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: (905) 479-4411
Published by Pioneer Corporation.
Copyright © 2000 by Pioneer Corporation.
All rights reserved.
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo 1009 3er. Piso Desp. 302
Col. Del Valle Mexico, D.F. C.P. 03100
TEL: 5-688-52-90
Publication de Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
Tous droits de reproduction et de traduction
réservés.
Printed in
Imprimé
<KKYLL/00G00000>
<CRD3276-A/JS> EW
|