Philips X600 User Manual

How to ...  
Discover Your Phone  
Switch the  
phone On/Off  
Long press and release  
).  
262K colour  
Back of phone:  
Camera lens  
TFT LCD  
Enter your  
PIN code  
Enter your PIN code using the  
keypad and press  
confirm.  
,
to  
Left softkey  
Right softkey  
Side volume  
keys  
Hang up and  
on/off key  
Make a call  
Enter the phone number using  
the keypad and press  
(.  
Navigation  
keys  
End a call  
Press  
).  
Alphanumeric  
keypad  
Answer a call  
When the phone rings, press  
(.  
Pick up key  
Activate/  
deactivate  
handsfree  
mode  
In idle mode, enter the phone  
number using the keypad or  
Headset, charger,  
and data cable  
connector  
Micro SD  
card slot  
select  
phonebook.  
During  
a
contact in the  
Microphone  
a
call, press to  
R
activate the handsfree mode.  
When there is an incoming  
Philips continuously strives to improve its  
products.Therefore, Philips reserves the rights to  
revise this user guide or withdraw it at any time  
without prior notice. Philips provides this user guide  
“as is” and does not accept, except as required by  
applicable law, liability for any error, omission or  
discrepancy between this user guide and the  
product described. The device is meant to be  
connected to GSM/GPRS networks.  
call, Press  
select Accept with handsfree and  
press  
L
Options, then  
,.  
Mute a call  
When the phone rings, press  
R.  
stop dialling, long press the headset key.  
During a call, short press the headset key to record  
or stop recording; long press to hang up the phone.  
When there is an incoming call, press the headset  
key to answer the call; long press to reject the call.  
page 58  
page 52  
page 61  
Connectivity  
Calls  
Settings  
Main Menu  
You can access the different features of your X600  
phone from the main menu. The following table  
summarizes the structure of the main menu, what the  
icons represent and the page number on which you  
can obtain more information regarding the menu  
functions.  
page 66  
page 63  
page 70  
Press  
press  
,
in idle mode to access the main menu, and  
or to navigate through the icons and lists.  
When navigating through a list, the scrolling bar on  
+,  
-
,
<
>
the right of the screen will indicate your current  
Entertainment  
Browser  
Media player  
position in the list. Press  
corresponding options of the selected item in the list.  
Press Back to return to the previous menu.  
,
Select to access the  
R
page 21  
page 22  
page 25  
Menu without SIM  
Camera  
Messages  
My files  
If you do not have a SIM card, those menu items  
whose functions that cannot work without a SIM  
will be greyed out and not accessible.  
page 33  
page 47  
page 28  
Business  
Contacts  
Profiles  
2
Table of contents  
Pinyin Input ...................................................... 17  
Stroke input .................................................... 18  
1. Getting Started ............................................6  
Inserting the SIM card ......................................6  
Switching on the phone ...................................7  
Charging the battery ........................................8  
Insert a micro SD Card ...................................9  
Setting hotkeys ..................................................9  
4. Entertainment ........................................... 21  
Games .............................................................. 21  
JAVA ................................................................. 21  
5. Browser ........................................................ 22  
2. Calling ............................................................. 11  
WAP ................................................................. 22  
Push Inbox ....................................................... 24  
Switch on the phone ..................................... 11  
Switch off the phone ..................................... 11  
Make a call ....................................................... 11  
Speed dial.......................................................... 12  
Answer and end a call ................................... 12  
Options during a call ..................................... 12  
Make a second call (Network dependent) ......13  
Make a Conference Call (Network  
6. Media player ............................................... 25  
Music player .................................................... 25  
7. Camera .......................................................... 28  
Camera ............................................................. 28  
Video recorder ............................................... 30  
8. Messages ....................................................... 33  
dependent) ...................................................... 13  
Answer a second call (Network  
dependent) ...................................................... 14  
Contact Picture .............................................. 14  
Create message .............................................. 33  
Inbox ................................................................. 35  
Sent ................................................................... 37  
Outbox ............................................................. 38  
Drafts ................................................................ 39  
My favourites .................................................. 39  
Spam box ......................................................... 41  
SIM archive ...................................................... 41  
3. Text and number entry ...................... 15  
Input method .................................................. 15  
T9® English input ........................................... 15  
Basic text input ............................................... 16  
3
Templates ........................................................41  
E-mail ................................................................41  
Advanced .........................................................43  
Voice mail ........................................................44  
Settings .............................................................44  
View contacts ................................................. 59  
View group ...................................................... 59  
Special numbers ............................................. 60  
Advanced ......................................................... 60  
12. Profiles ........................................................ 61  
13. Connectivity ............................................ 63  
9. My files ...........................................................47  
Pictures .............................................................47  
Sounds ..............................................................49  
Videos ...............................................................50  
Others ..............................................................51  
Memory status ................................................51  
Memory card....................................................51  
Bluetooth ......................................................... 63  
USB function ................................................... 64  
Using PhilipsPhoneTools ............................... 64  
14. Calls .............................................................. 66  
View calls ......................................................... 66  
Call options ..................................................... 66  
Clear history ................................................... 69  
10. Business ......................................................52  
Calendar ...........................................................52  
Alarm ................................................................53  
Calculator ........................................................53  
Voice recorder ...............................................54  
Memo recorder ..............................................54  
Stopwatch ........................................................55  
Countdown .....................................................55  
Unit converter ................................................55  
Firewall .............................................................55  
Task....................................................................56  
STK.....................................................................57  
15. Settings ....................................................... 70  
General ............................................................. 70  
Display .............................................................. 72  
Sounds .............................................................. 73  
Connectivity .................................................... 73  
Icons & Symbols ............................................ 75  
Precautions ....................................................... 77  
Troubleshooting ........................................... 82  
Philips Authentic Accessories .............. 84  
Trademark Declaration ............................ 85  
11. Contacts .....................................................58  
New contacts ..................................................58  
4
Specific Absorption Rate Information .... 86  
Limited Warranty ........................................ 87  
Declaration of conformity ..................... 90  
5
1. Getting Started  
Please read the safety instructions in the  
"Precautions" section before use.  
Before you start using your phone, you must insert  
a valid SIM card supplied by your GSM operator or  
retailer. The SIM card contains your subscription  
information, your mobile telephone number, and a  
small quantity of memory in which you can store  
phone numbers and messages (for more  
information, see "Contacts" on page 58).  
Remove the battery  
Put your finger at the top of the battery and lift the  
battery up from its slot.  
You can also insert a memory card. This provides  
you with expanded memory capability, which  
allows you to store additional music, photo, and  
video files that are separated from the phone's  
built-in memory.  
Inserting the SIM card  
Remove the back cover  
You may lose all your personal settings if you  
remove the battery when the phone is switched  
on.  
To insert the SIM card, you must first remove the  
back cover. As shown, press on the back cover  
with your thumbs and slide the cover. Then use  
your free hand to lift up the back cover.  
6
Getting Started  
Insert the SIM card  
Make sure that the clipped corner of the SIM card  
is facing the correct direction (clipped corner at  
upper left) and the metallic contacts are facing  
downwards. Slide the SIM card into the card slot  
until it stops. When you remove your SIM card the  
first time, make sure that you smoothen the edges,  
otherwise you may have difficulty sliding in the  
card.  
Replace the back cover  
Replace the back cover by sliding it down into its  
slots, until it stops.  
Replace the battery  
When inserting the battery, be careful not to  
damage the metallic connectors of the SIM  
card slot.  
With the metallic contacts facing downwards, press  
the battery down into its slot until it locks into  
place.  
Switching on the phone  
To switch on the phone, long press and release the  
)
key. Enter the PIN code if required (the 4 to 8 digit  
secret code of your SIM card). It is preconfigured and  
provided to you by your network operator or retailer.  
Getting Started  
7
For more information on PIN code, see "Security" on  
page 71.  
If you enter an incorrect PIN code 3 times in  
succession, your SIM card will be blocked. To  
unblock it, you must obtain the PUK code from  
your network operator.  
Charging the battery  
Your phone is powered by a rechargeable battery.  
The new battery is partially charged. A sound alert will  
be emitted to warn you when the battery level  
becomes low.  
The battery symbol indicates the state of charge.  
During charging, the charge indicators will scroll; it  
takes around 4 hours to fully charge the battery.  
When all the scroll bars are steady, the battery is  
fully charged. You can then disconnect the charger.  
Depending on the network and condition of use,  
talk time and stand-by time can go up to 8.5 hours*  
and 720 hours (1 months)* respectively.  
We recommend that you do not remove the  
battery when the phone is switched on as you  
may lose all your personal settings as a result. If  
you do remove it, the date and time settings are  
only memorized for a short while. As such, you  
need to reset the information after you have  
installed the battery back again.  
*Depending on the network conditions, user  
settings, method of use, etc the actual results  
may differ.  
Once the battery and battery cover are installed,  
you can charge the phone. Plug in the connector as  
shown below. Then plug the other end into an AC  
power socket.  
Keeping the charger plugged to the mobile  
phone when the battery is fully charged will not  
damage the battery. The only way to turn off  
8
Getting Started  
the charger is to unplug it, so it is advisable to  
use an easily accessible power socket.  
To remove the micro SD card, push down the  
card into its slot and release it. The card will  
spring out of the slot.  
If you do not intend to use your phone for  
several days, we recommend that you remove  
the battery.  
The maximum capacity of micro-SD that X600  
can support is up to 2GB.  
You can use the phone while it is charging. If  
the battery is completely flat, the battery icon  
will only reappear after a few minutes of  
charging.  
Setting hotkeys  
You can configure  
+,  
-
,
<,  
>,  
L
and  
R
to access  
your favorite features. Once they have been set,  
you can simply long press the keys to access the  
corresponding features.  
Insert a micro SD card  
Majority of the hotkeys have been preset and  
configured. To check the hotkey settings, go to Settings  
> General > Shortcuts. To change the hotkey setting,  
press the numeric key you wish to change and Press  
Gently slip the card into the micro SD card slot  
with the card’s gold contacts facing downwards,  
then press it down until the card locks into place.  
,
Change, then select a feature to be associated with  
the numeric key from the following list:  
• Alarm  
• Bluetooth  
• Calculator  
• View calls  
• Contacts  
• Firewall  
• Games  
• Calendar  
• Camera  
• Create message  
• Flight mode  
• Homepage  
Getting Started  
9
• Inbox  
• Languages  
• Messages  
• Music  
• Menu  
• Meeting  
• My files  
• Ringtones  
• Tasks  
• Profiles  
• Shortcuts  
• Unit converter  
• Memo recorder  
• Voice recorder  
• Empty  
Numeric keys  
0,  
1
and  
#
have been  
preconfigured as the default keys to enter “+”,  
access voice mailbox and activate Meeting  
profile respectively, and cannot be modified.  
10  
Getting Started  
anymore. If this happens, please contact your  
network operator.  
2. Calling  
This chapter describes the features and options  
related to making and receiving calls.  
Switch off the phone  
At all times, you can long press  
phone.  
)
to switch off the  
Switch on the phone  
Long press  
)
to switch on the phone.  
You may set a security code (PIN code) on your  
phone to protect it from unauthorized use. When  
you have set a security code, you will be prompted  
to enter the corresponding security code when you  
switched on the phone.  
Make a call  
You can make a call only when the network  
name appears on the screen.  
1. Enter the phone number.  
1. Enter the PIN code. If you have entered the  
2. Press  
(
to dial the number or press  
L
Options  
wrong number, press  
R
Clear to clear it.  
to enter options menu, then select Dial.  
2. Press . The phone will validate the PIN code  
,
IP Dial (If available)  
and commence network registration.  
3. Once a network name is displayed on the  
screen, you are ready to make or answer a call.  
If there is no network name on the screen, you  
need to re-register.  
When you select  
L
Options > Dial > IP dial option,  
the mobile phone will automatically add the IP  
special service number preset by you in front of the  
phone number and then make the IP dial.  
To set your desired IP number, go to Calls menu >  
Call options > IP number. See "Call options" on  
page 66.  
If you enter a wrong PIN code 3 times in  
succession, your SIM card will be blocked. To  
unblock it, you must request the PUK code from  
your operator. If you enter a wrong PUK code  
10 times in succession, your SIM card will be  
permanently blocked and cannot be used  
Make an international call  
1. Long press  
0
until "+"appears on the screen.  
2. Enter the country code.  
Calling  
11  
3. Enter the area code (normally without the 0 in  
front), followed by the phone number.  
2. Select a numeric key that you wish to assign to  
a contact (2 to 9).  
4. Press  
(
to call directly.  
3. Press  
,
to select  
a
contact from your  
phonebook. Press , to confirm.  
Make an emergency call  
You can make an emergency call anytime,  
irrespective of whether the mobile phone has been  
registered on the network.  
Answer and end a call  
When there is an incoming call, the number of the  
caller may be displayed if the caller has chosen to  
display his or her identity. If the number is stored  
in the phonebook, the corresponding name will be  
displayed instead of the number.  
1. In idle mode, enter the emergency call number  
(specific number in the caller's country)  
2. Press  
(.  
Note that an emergency call will not be stored  
in the call record.  
Answer the call: press  
(/,  
or open the phone if  
the Active flip option is On (see See "General" on  
page 70).  
End the call: press  
3. Alternatively, if there is no SIM card, pressing  
)
or close the phone.  
R
SOS can also bring you to the emergency  
call screen, displaying the call number. Then  
press or the OK softkey to directly make an  
Options during a call  
During a call, you can press  
Handsfree or press  
(
emergency call and the dial animation will be  
displayed.  
R
to activate/cancel  
L
Options to carry out the  
following operations:  
Speed dial  
- Put the call on Hold  
- Mute/Unmute the call  
- Record phone conversation (which includes 3  
You can set the numeric keys 2 - 9 as speed dial  
keys. By long pressing the keys, you can make a call  
to certain contacts as defined.  
To set your speed dial keys,  
1. Go to Settings > General > Speed dial.  
sub-options: Record both  
and Record own  
- Make a New call  
,
Record opposite party  
)
12  
Calling  
 
- End the current call  
When the volume has been set, the call volume will  
take effect immediately and the settings will be  
applied to your subsequent calls.  
Mute or unmute a call  
If you select Mute  
,
the microphone will be  
deactivated.  
Make a second call (Network  
dependent)  
When you switch from one call to another, muting  
will be cancelled.  
Call recording  
You can make a second call by putting the current  
call on hold:  
1. During a call with Party A, you can enter Party  
B's number using the keypad.  
During a call, press  
L
Options and select Record to  
access the 3 recording options; namely, Record both  
(default), Record the opposite party and Record own  
(applicable to two-party calls or multi-party calls).  
When you end the call, the recording will stop and  
be saved automatically in AMR format under My files  
> (Phone or Micro SD card) > Sounds  
There is no limit to the length of the recording;  
the recording will stop only when you press  
2. Press  
(
to dial Party B's number. Party A will  
be put on hold automatically.  
Switch calls (Network dependent)  
.
When you have one active call and one call on hold,  
you can press  
,
Swap to switch between the 2 calls.  
R
key to stop the recording, when there is  
insufficient memory, or when the call has ended.  
Make a Conference Call (Network  
dependent)  
Adjust speaker/earpiece volume  
During a call, call on hold or call waiting, you can  
press + / - side key to increase or decrease the  
volume (if you are not browsing the call options  
menu).  
Your phone supports multi-party call of up to five  
members.  
When on the phone, you can carry out the  
following operations to establish the multi-party  
call:  
Calling  
13  
1. Make a second call. The first call will be put on  
hold automatically.  
2. Select Conference Call from the call menu. The  
two calls will be combined and a conference  
call is established.  
2. Press  
)
to reject the second call and continue  
with your current call.  
3. When there is one active call and one call on  
hold, you can press  
carry out the following operations:  
,
Swap or  
L
Options to  
During the multi-party call, you can answer a new  
incoming call or add a new member to the call by  
dialing the new member (the ongoing multi-party  
call will be put on hold automatically). Once the call  
is established, select Establish conference call from  
the call menu to add the new member to the multi-  
party call (you can add up to five members).  
If you wish to separate one member from the call,  
you can select Split conference call during the multi-  
party call. To disconnect a member from the call,  
select End call in conference.  
• Conference call  
• Mute  
• Call transfer  
• Record  
• Handsfree  
• End all calls  
• End calls  
• View contacts • Menu  
If you press the numeric keys, the notepad  
editor will be opened under call waiting mode.  
Contact Picture  
This feature allows you to link a contact in your  
phonebook to a photo you have taken using the  
camera function, or a picture you have downloaded  
via WAP or data cable. During a call, if the other  
party's name card is linked to a picture, the  
incoming call background will display the  
corresponding picture. This feature is referred to  
as Contact picture.  
Answer a second call (Network  
dependent)  
If you have activated Call waiting (enabled by default  
on your phone), you will be alerted when there is a  
second incoming call. You can:  
Contact picture shall be a photo or picture on the  
phone memory. The photo size should not be  
larger than 176 x 220 pixels.  
1. Press  
(
to answer the second call. The  
current call will be put on hold automatically.  
14  
Calling  
3. Text and number entry  
Input method  
Your mobile phone supports several input  
methods, which include:  
Depending on the language you select for your  
phone, the supported input methods may vary.  
*During text editing, you can press  
*
to switch  
input mode; the status bar on the screen will  
display your current input mode.  
represents Simplified Chinese Pinyin input mode;  
represents Simplified/Traditional Chinese  
stroke input mode; Abc, abc, ABC』  
represents English alphabets input mode; 123』  
represents numeric input mode. In addition, you  
T9 Pinyin: Enter chinese characters with T9  
Pinyin;  
T9 Stroke: Enter Chinese characters with  
T9 wubi and stroke components;  
T9 Traditional Chinese stroke: Enter  
Traditional Chinese characters with Wubi  
or stroke components;  
can press  
#
to input punctuations.  
The text editor remembers the last input method  
you have used before you exit the editing screen.  
When you access the editor again, it will  
automatically select the last input method you have  
used.  
T9 English (T9eng/T9Eng): Enter English  
text using T9 English;  
T9 input: Enter text using T9 input;  
Multi-Tap (Abc/abc/ABC): Press the keys  
that are marked with the corresponding  
letter you wish to enter. Press once to get  
the first letter on the key, press twice  
quickly to get the second letter and so on  
until the letter you want is displayed on the  
screen.  
®
T9 input  
T9® predictive text input is an  
intelligent editing mode for messages,  
which includes  
a
comprehensive  
Tegic Euro. Pat.  
App. 0842463  
dictionary. It allows you to quickly  
enter text. You need to press only  
once on the key corresponding to  
123: Enter numbers  
This phone supports T9 Simplified Chinese  
association input method as well.  
each letter needed to spell a word: keystrokes  
Text and number entry  
15  
 
input are analyzed and the word suggested by T9®  
is displayed at the pop-up window. If there are  
more than 3 candidates, a scroll bar is shown, press  
+ or - to browse the list and choose from those  
proposed by the T9® built-in dictionary (see  
example below). After you have input the word,  
Example: How to enter the word "Home"  
1. Press 4 6°6 3, the screen displays the  
first word on the list: Good  
.
2. Press  
-
L
to browse and select Home  
Select to confirm Home  
.
3. Press  
.
press  
,
or  
L
to confirm.  
Basic text input  
If you wish to use basic text input mode, press  
How to use it?  
*
Alphabets and symbols represented by each key  
are as follows:  
to select "ABC", "Abc" or "abc" basic text input.  
This method requires multiple key presses to reach  
the desired character: the letter "h" is the second  
0
to  
9
To input letters.  
letter on the  
4
key, so you must press  
4
twice  
+
or  
-
To browse the last or next candidate  
word.  
to enter "h". Using this mode requires you to press  
a key as many times as is equal to the order of the  
letter.  
,
Select  
Clear  
To confirm the letter or word.  
To enter the word «Home» in basic text input  
Short press to clear a letter, long press  
to clear all entries.  
R
*
mode, you should therefore key  
MNO), (MNO),  
4,  
4
(
G
H
I
)
6,  
6,  
6
(
6
3,  
3
(
D
E
F
).  
Shift case, select input mode. Long  
press to turn on/off T9 feature.  
Letters, numbers and symbols are located on each  
key as follows:  
#
Key  
1
Letters and numbers  
Short press to activate/deactivate  
punctuation mode, long press to select  
input language.  
Space 1 @ _ # = < > ( ) & £ $ ¥  
2
a b c 2 à ä å æ ç  
16  
Text and number entry  
Pinyin Input  
3
4
5
6
7
8
9
0
*
#
d e f 3 é è D F  
g h i 4 G ì  
Press  
*
and select Pinyin input mode. Each Pinyin  
letter is represented by one of the numeric keys as  
shown below: (Note that Pinyin input mode is  
solely meant for the input of Simplified Chinese  
characters. You cannot input Traditional Chinese  
characters).  
j k l 5 L  
m n o 6 ñ ò ö ø  
p q r s 7 b P Q S  
t u v 8 ü ù  
1
4
7
*
2
5
8
0
ABC  
JKL  
3
6
9
#
DEF  
w x y z 9 W X Y  
Input space  
GHI  
MNO  
Switch text input mode  
Input symbol  
PQRS  
Mode  
TUV  
WXYZ  
Punctuation  
Text and number entry  
17  
The general steps of using Pinyin input method are  
as follows:  
Enter the pinyin letters accordingly. Press once on  
the key corresponding to the pinyin letter without  
having to consider its position on the key. Pinyin  
input method will automatically select and list all  
possible combinations for you to select.  
For example, to input the character『王, with the  
Pinyin letterswang, press 9 2 5 4 and use  
1. Enter Pinyin letters  
2
R
to  
9
to clear  
2. Select Pinyin combination  
3. Confirm Pinyin combination  
4. Select from candidate list  
<
or  
>
>
to select the desired pinyin combination for  
,
wang, then press to confirm combination.  
,
As soon as you have selected and entered a  
character, the candidate list will be updated and a  
list of association characters will be displayed. Press  
<
or  
>
/
+
or  
-
(scroll list)  
<
or  
>
to select the desired association character  
to confirm entry. This speeds up the  
and press  
,
5. Confirm selection  
,
input process further.  
6. Select and enter association character, or return  
to step 1 to enter new words.  
When you have finished editing a name on the  
phonebook or SMS, press  
association character input mode and press  
confirm completion of the editing process.  
R
to exit from  
,
to  
7. Or press  
R
to exit from association character  
to complete. the editing.  
Stroke input  
input mode, then press  
,
Press  
*
to select stroke input mode. The strokes  
are represented on each key as follows:  
18  
Text and number entry  
The basic steps of Stroke input are as follows:  
1
Horizontal  
2
Vertical  
Over-  
3
Left-falling  
Special  
1. Enter strokes  
1
to  
(excluding  
to clear.  
or  
5
5
down  
7
and  
6
9
#
4
7
*
Right-falling  
9)  
R
8
0
2. Select from candidate list  
3. Confirm selection  
<
or  
>
/
+
-
Punctuation  
Mode  
(scroll list)  
,
4. Select and enter association character,  
or return to step 1 to enter new strokes.  
5. Or press  
R
to exit from association character  
input mode, then press  
editing.  
,
to complete the  
The principle of stroke input is to dissect and  
separate every stroke of a chinese character  
according to sequence. When you wish to input the  
character, press the keys corresponding to the  
required strokes according to sequence to get the  
Text and number entry  
19  
desired character. The stroke input method in this  
phone classifies a chinese character into 5 basic  
strokes: (horizontal, vertical, left falling stroke,  
right falling stroke and over-down) as well as a  
special stroke. When the stroke you need does not  
correspond to the 5 basic strokes, replace it with  
the special stroke.  
Generally, you will be able to find a desired  
character before you finished entering all the  
strokes. After you have entered the name of the  
phonebook or SMS, press  
association character list and press  
completion of text editing.  
R
to exit from the  
,
to confirm  
The input mode for Traditional chinese stroke  
and Simplified Chinese stroke are similar, with  
the exception of the character coding.  
The examples below will give you a clearer  
understanding of how to use stroke input method:  
1. 木∶  
1
+
+
2
+
+
3
+
4
2. 田∶  
2
5
1
+
2
+
1
+
3. 加∶  
6
+
3
1
+
2
4
+
+
5
+
1
4. 凉∶  
4
5
+
6
+
+
1
+
2
+
+
+
+
6
1
3
6
+
4
5. 陈∶  
6
3
2
4
+
+
+
6
+
+
20  
Text and number entry  
applications via WAP or USB and run them in the  
Java environment.  
4. Entertainment  
When installing games via a USB data cable, make  
sure that the application files are under the same  
file folder as the .jar and .jad files.  
This section describes the games and additional  
tools installed on your mobile phone.  
Some of the features described here are  
dependent on the configuration of your mobile  
phone, the country in which you purchased  
your mobile phone, and/or your service  
provider.  
Games  
Default games  
This menu features games that are pre-installed in  
your mobile phone. Press  
,
to enter the main  
menu from idle mode and select Entertainment >  
Games.  
Java  
Your mobile phone features a Java run-time  
environment, which allows you to run Java  
applications, such as games downloaded from the  
network. You can also download games and other  
Entertainment  
21  
   
changes of configuration made by you or by the  
network operator. Please check with your  
network operator for the most updated  
information.  
5. Browser  
Homepage  
Your phone comes with a WAP browser. You can  
obtain news, sports and weather information, as  
well as services from the internet via the WAP  
browser.  
Select this menu to access the homepage directly.  
You can also set the homepage address in the  
settings menu.  
Bookmarks  
This feature is available only if your  
subscription includes WAP access services. The  
settings have been pre-configured (depends on  
country variants) and you do not need to  
modify them. For more information, please  
contact your network operator.  
You can save the current web page or the web  
pages that you frequently visit to the Bookmarks list,  
manage and organize them.  
When you enter the menu, a list of bookmark  
entries is displayed. To connect to the web address  
of a particular bookmark entry, select an entry  
using  
+
or  
-
and press  
,.  
WAP  
If there are no existing entries, you can select the  
following options to add and manage your  
bookmarks:  
Normally, the phone would have been pre-  
configured. If you wish to add or modify the  
configuration parameters, you need to obtain  
the necessary information from your network  
operator before you proceed. Philips is not  
liable to give prior notification nor shall it bear  
any consequences for any failures arising from  
To add a new bookmark:  
Go to Bookmark menu Press  
main menu from idle  
mode and select  
Browser > Bookmarks.  
,
to enter the  
22  
Browser  
 
2. Select a web page on the list and press  
Then press Options to access the following:  
Open  
,.  
Select Add Bookmark  
Press  
,.  
L
Add a new bookmark  
Enter the Title and URL  
Info  
Exit  
of the new bookmark  
and press  
,
Save.  
Navigate  
Go to  
To edit a bookmark:  
Go to Bookmark menu Press  
main menu from idle  
mode and select  
Browser > Bookmarks.  
,
to enter the  
History  
Save as  
Send as SMS  
Select a bookmark you Press  
+
or and press  
Options. Then select  
Edit and press Select.  
-
Settings  
wish to edit  
L
This menu allows you to configure the web settings  
for web browsing. Your phone may have been pre-  
configured with the settings of a specific network  
operator. If you are a subscriber of the network  
operator, you may start using your WAP browser  
immediately. Otherwise, you need to re-configure  
the settings.  
,
Edit the bookmark  
Edit the Title and URL of  
the bookmark and  
press  
,.  
Enter address  
Enter the web address and press  
,
to connect,  
Philips is not liable to give prior notification nor  
shall it bear any consequences for failures  
arising from changes in configuration made by  
you or by the network operator, or changes in  
WAP address or contents made by the internet  
content provider. Please check with your  
press  
R
Back to return to previous web page.  
History  
This menu allows you to quickly access the last web  
page you have visited.  
1. When you enter this menu, the web pages you  
have previously visited will be listed.  
Browser  
23  
network operator and your internet content  
provider for the most updated information.  
The following options are available:  
WAP profiles  
Allows you to configure the WAP  
profiles.  
Clear cache  
Allows you to set the Clear cache.  
Clear history  
Allows you to remove the web  
history.  
Options  
Allows you to Show images, Exit info  
or Enable cookies  
.
Push Inbox  
Allows you to check your Push messages and  
configure your Push settings, such as select whether  
or not to accept Push messages, delete push  
messages, etc.  
24  
Browser  
6. Media player  
Details  
View detailed information of the  
selected track.  
Playlists  
You can create up to 10 playlist. To create a new  
playlist, select New playlist. Enter the playlist name  
Music Player  
and press  
. Press  
add to the playlist. Then press  
and store the songs in the playlist.  
In the playlist, press Open to play the selected  
Options.  
,
,
. Then use  
and select the tracks that you want to  
Done to confirm  
+
/
-
to select a playlist, press  
This feature allows you to download music from  
the network, save the audio files, edit your playlist,  
and play music. The phone supports audio files in  
MP3, AAC, AAC+, and WMA formats. However,  
only MP3 format is supported with the bluetooth  
headset.  
,
,
,
track or press  
Options  
L
Description  
Tracks  
Edit playlist  
Select or deselect a track to add  
or delete it.  
This feature allows you to play downloaded music  
in your Phone memory or Micro SD card (under  
Rename  
playlist  
Modify the playlist name.  
Sounds folder). From the listed tracks, use  
select the music file you want to play and then press  
Open to open the music player to play the  
selected track or press Options.  
+/-  
to  
,
Delete  
playlist  
Delete the current playlist.  
L
Options  
Description  
Add to  
playlist  
Open the playlist, select a playlist  
and add the selected track to the  
playlist.  
Delete track  
Delete the selected track.  
Media player  
25  
 
Tracks  
sequence  
Modify the play sequence of the  
current playlist. Use to select  
the track you want to move. Press  
Select. Use to move the track  
Details  
View detailed information of the  
selected track.  
+/-  
Last played  
,
+/-  
List the last 10 tracks you have played, and the last  
played track is displayed at the top of the list.  
to the desired position. Press  
,
Insert.  
Settings  
The available options include:  
Details  
View detailed information of the  
selected file.  
Options  
Description  
Artists  
A list of singer names is displayed on the screen.  
Play in  
background  
Allows you to listen to the music  
when you exit the music player  
application. You can select Ask  
first, Always or Never.  
You can press  
to display all tracks of the selected artist.  
From the listed tracks, use to select the music  
file you want to play. You can press Open to  
open the music player to play the selected track or  
press Options.  
+/-  
to select a certain artist and press  
,
+/-  
,
Play mode  
Help  
Select between Repeat one, Repeat  
all, Shuffle and repeat, Shuffle or  
Off.  
L
Options  
Description  
Display descriptions on how to  
use the music player.  
Add to  
playlist  
Open the playlist, select a playlist  
and add the selected track to the  
playlist.  
Refresh all lists All tracks stored in the phone  
memory and the memory card will  
be refreshed.  
Delete track  
Delete artist  
Delete the selected track.  
Delete all tracks of the same artist.  
26  
Media player  
Press  
operations:  
L
Options to carry out the following  
Now playing  
The screen displays the last played song. This  
function enables you to go on playing the last  
playlist you were listening to.  
Options  
Description  
Play in  
background  
Allows you to listen to the music  
when you exit the music player  
application. You can select Ask  
first, Always or Never.  
Keys operation  
The keypad operations during music playback are  
as follows:  
Add to  
playlist  
Open the playlist, select a playlist  
and add the selected track to the  
playlist.  
Key  
key  
Operation  
,
Short press to Start/Pause/resume  
music playback.  
Play mode  
Select between Repeat one, Repeat  
all, Shuffle and repeat, Shuffle or  
Off.  
<
or  
>
Short press to select the previous  
song/next song. Long press to fast  
rewind/fast forward the track  
during playback.  
Off  
Turn off the music player.  
+ or -  
Adjust volume. Once you have set  
the volume, the settings will be  
saved until the next time you  
adjust it again.  
Details  
View detailed information of the  
selected file.  
L
R
Options  
Back  
Open options menu.  
Return to previous menu. When  
you exit the music player, the  
music playback will stop.  
Media player  
27  
7. Camera  
Zoom in/out  
Press  
+/-.  
Only available for picture  
resolution of 640*480 or  
below.  
Camera  
Adjust  
brightness  
Press +/- side keys.  
Your mobile phone features a 2.0 mega pixel digital  
camera that allows you to take pictures and record  
videos, store them in your phone and memory  
card, use them as wallpaper or send them to your  
friends.  
Brightness level is -3 to +3.  
Default level is 0.  
Take a picture  
Press  
,.  
Please ensure that the camera lens is clean  
before you take pictures, as small dust particles  
can strongly affect the picture quality.  
The  
picture  
will  
be  
automatically saved and  
stored in My files > Pictures.  
Camera mode  
Exit from  
Press  
twice.  
)
key or  
R
Back  
Consult the table below on how to carry out some  
common operations with your camera.  
How to ...  
Camera and  
returntotheidle  
mode  
Launch Camera  
Press  
,
to enter the main  
At any point in time, you can press  
cancel the current operation and return to idle  
mode.  
)
key to  
menu from idle mode and  
select Camera.  
Camera option menu  
When the camera mode is activated and before a  
picture is taken, you can change a number of  
Switch between  
Camera and  
Video recorder  
Press</>.  
settings by pressing  
L
Options.  
28  
Camera  
   
Options  
Description  
Camera  
Mode  
Color effects: Off (default), B&W,  
Sepia, Blue, Red or Emboss.  
Picture  
resolution  
Select image size: 1600*1200,  
1280*1024, 1024*768, 640*480  
and 176*220.  
The selected color effect will be  
displayed on the screen in real  
time.  
Picture  
Quality  
Select image quality: Super fine, Fine  
and Normal.  
Night mode: On or Off  
Self-timer: On or Off  
The last selected value will  
remain active until you change it  
again.  
The time limit is 8 seconds.  
Multishot: On or Off  
View  
picture  
Enter My files > (Phone or Micro SD  
card) > Pictures to view the pictures  
taken. You can also access View  
Three pictures can be taken at  
the same time.  
pictures and press  
the picture taken directly.  
,
Open to view  
Advanced  
Storage location: My files or Memory  
card  
Default name: modify the default  
name of the photo  
Frequency: 50HZ or 60HZ  
Full screen preview: On or Off  
You may save to the Micro SD card  
a photo greater than 500K in size.  
To view such a photo, select it, and  
copy it to your phone memory first  
(press LOptions > Advanced >  
Copy to copy the photo; enter My  
files > Phone > Pictures, select a  
location, and press LOptions >  
Advanced > Paste here).  
Photo preview option menu  
Once you have activated the camera, simply press  
to take a picture. The picture is automatically  
,
saved and displayed on the screen. You can press  
,
Camera  
29  
to Send the picture via Bluetooth or via MMS, or  
Options to carry out the following operations:  
L
be prompted with a warning message. You have  
to delete existing pictures before you can store  
new ones.  
Options  
Delete  
Description  
Delete the current picture.  
Change the name of the picture.  
Video recorder  
Rename  
Capture  
This option allows you to record short videos.  
You can play the video, store it in your phone or  
in the memory card. You can also send the video  
to your friends via MMS or Bluetooth.  
Return to the viewfinder screen to  
take a new picture.  
Set as  
contact  
picture  
Link the picture to a contact in your  
mobile phone so that the picture will  
be displayed when the contact calls  
you.  
How to ...  
LaunchVideo Press  
,
to enter the main menu  
recorder  
in idle mode and select Camera.  
Available for picture resolution of  
176*220 only.  
Press  
Press  
<
/
/
>
>
if necessary.  
Switch  
<
.
between  
Camera and  
Video  
Edit  
Modify or edit the selected picture.  
Press  
+/-  
and , to select your edit  
options.  
recorder  
Set as  
wallpaper  
Set the picture as a wallpaper in idle  
screen.  
Adjust  
brightness  
Press +/- side keys.  
Details  
View detailed information of the  
picture.  
Brightness level is -3 to +3.  
Default level is 0.  
When there is not enough memory space, you  
will not be able to save the picture and you will  
30  
Camera  
Record a  
video  
Press  
stop recording.  
,
key once. Press again to  
View  
video  
Enter My Files > (Phone or Micro SD  
card Videos to view the  
recorded videos. You can also  
access View video and press Play  
to view the recorded videos  
directly.  
)
>
The video  
automatically  
stored in My Files > Videos.  
will  
be  
and  
,
saved  
Exit from  
Press key or Back twice.  
)
R
DV mode  
Advanced  
Color effect: Off (default), B & W,  
Sepia, Blue, or Red  
Video mode  
and return to  
idle mode  
The selected color effect will  
be displayed on the screen.  
Video option menu  
When the video mode is activated and before you  
start recording, you can change a number of  
Video format: MPEG-4 or H263  
FPS: 5, 10 or 15 frame per  
second.  
settings by pressing  
L
Options.  
Storage location: My files or  
Memory card.  
Default name: modify the default  
name of the video  
Options  
Description  
Video quality  
Select video quality: Fine or  
Normal.  
Mute: On or Off  
The last selected value will  
remain active until you change  
it again.  
If you select On, sound will not  
be recorded.  
Camera  
31  
or pause the playback, or press  
out the following operations:  
L
Options to carry  
Video length: MMS (default) or  
Unlimited.  
Options  
Description  
If you select MMS, the size of  
the recorded video will be  
smaller than the currently  
specified maximum MMS size.  
Recording will stop when  
reaching the maximum MMS  
size and the video will be  
stored automatically. If you  
select Unlimited, there will be no  
restrictions on the size of the  
recorded video. The maximum  
size shall be determined by the  
memory capacity of your  
mobile phone or the memory  
card.  
Send  
Send the recorded video:  
Via Bluetooth and Via MMS.  
Delete  
Delete the recorded video.  
Record new Return to video mode to record a  
new video clip.  
Details  
View detailed information of the  
recorded video.  
When there is not enough memory space, you  
will not be able to save the recorded video and  
you will be prompted wtih a warning message.  
Video Playback  
Once you have activated the video mode, simply  
press to start recording. Press again to stop  
,
recording. The video is automatically saved and the  
last recorded scene is displayed on the screen. You  
can press  
,
Play/Pause to play the recorded video  
32  
Camera  
3. Enter the SMS content in the SMS editor and  
press Options to carry out the following  
operations:  
8. Messages  
L
Clear text  
Delete the text on the editing  
screen.  
Create message  
Save  
Save as draft: save the SMS as draft.  
Save as template: save the SMS as  
template.  
SMS  
SMS enables you to send text messages to the  
other party, which is a convenient and affordable  
mode of communication. You can use the SMS  
menu to send messages to another handphone or a  
device that is capable of receiving SMS.  
Insert contact Insert the contact from the  
phonebook list.  
Use template  
Exit editor  
Insert a preset message.  
Exit from the SMS editor.  
Your phone can store up to 1000 messages. Once  
you have reached 1000 messages, the screen will  
flash an icon to alert you. You need to delete some  
messages in order to receive new ones.  
Spell word  
Select Chinese pinyin input  
method.  
Help  
Displays the shortcuts for editing.  
Create, edit and send SMS  
If your SMS is not sent successfully, you can  
resend it. If your SMS cannot be sent  
successfully after several attempts, please  
check if your SMS center number has been set  
correctly.  
You need to enter the correct message centre  
number before you can send SMS. The number  
can be obtained from your network operator.  
1. In idle mode, press  
2. Select Messages  
press . The SMS editing screen will appear.  
,
to enter the main menu.  
>
Create Message SMS and  
>
,
When editing SMS, for certain reasons (such as  
an incoming call, out of battery), you are forced  
Messages  
33  
 
to exit from the SMS editing screen before you  
managed to send or save your message  
successfully, the edited message will be saved  
automatically. The next time you enter the  
SMS editor, the message will be displayed on  
the screen.  
3. Enter the MMS content in the MMS editor and  
press . Then press Options to carry out  
the following operations:  
,
L
Insert object  
Insert picture, video, melody, page  
or object.  
Only a picture, a melody and a  
video can be inserted on one  
page. If 3 of them exist at the  
same time, only one can be saved.  
MMS (network dependent)  
Your phone allows you to send and receive  
multimedia messages, known as MMS, which  
features texts, pictures, sound and video clips. MMS  
can comprise one or several slides. Whether you  
send it to an e-mail address or to another mobile  
phone, the MMS will be played as a slide show.  
Your phone can support 50 MMS (maximum  
100KB).  
Edit subject  
Preview  
Edit the subject of the MMS  
Preview the current MMS.  
Page timing  
Set play time of the MMS slides. The  
default value is 30 seconds.  
Save  
Save as draft: save the MMS as draft.  
Save as template: save the MMS as  
template.  
Before you can send MMS, you need to enter  
the correct MMS Center number and ensure  
that the network profile of your MMS has been  
correctly configured. You can obtain such  
information from your network operator.  
Exit editor  
Spell word  
Help  
Exit from the MMS editor.  
Select Chinese pinyin input method.  
Displays the shortcuts for editing.  
Create, edit and send MMS  
1. In idle mode, press  
,
to enter the main menu.  
Create Message MMS and  
. The MMS editing screen will appear.  
When there is more than one page, you can press  
</  
2. Select Messages  
press  
>
>
>
to view the different pages of the MMS. At the  
,
same time, the title bar at the top of the screen will  
34  
Messages  
display the current page you are viewing and the  
total number of pages in your MMS.  
the selected messages or press  
carry out the following operations:  
L
Options to  
4. Press  
,
Send to access the next option menu:  
Reply  
The sender's number will be used as  
the destination number  
Contacts  
Select the contact from the Contacts  
automatically and the message  
editor will be activated. Enter your  
reply and send the message.  
list.  
Groups  
Select the group from the Groups  
list.  
Forward  
Delete  
When you select Forward  
,
the  
Phone  
number  
Enter the phone number of the  
recipient.  
contents of the selected message  
will appear in the message editor.  
You may edit the message before  
sending.  
Recently list  
Select from the list of recipients you  
received the messages from.  
Email  
address  
Enter the e-mail address of the  
recipient.  
Delete the message from the  
Inbox.  
Add to  
blacklist  
(if  
When you add the contact to the  
blacklist, you will not receive call/  
message from this contact  
anymore.  
Inbox  
The Inbox stores the messages you have received.  
1. In idle mode, press Inbox  
L
.
applicable)  
If there are messages in the Inbox, they will be  
listed on the screen in the order they were  
received (the most recent message will appear  
at the top of the list).  
Archive to SIM Move the selected message to the  
(if  
SIM card.  
applicable)  
2. Press  
message is selected, its contents will be  
displayed on the screen. Press View to view  
+
/
-
to select a message. When a  
Move to my  
favourite  
Move the selected message to My  
Favourites  
.
,
Messages  
35  
L
Options to carry out the following  
operations:  
Forward  
Details  
View information of the message  
such as date, time and sender.  
When you select Forward  
,
the  
Dial  
Extract the sender's number from  
the message and dial the number.  
contents of the selected message  
will appear in the message editor.  
You may edit the message before  
sending.  
Smart Search  
Search the messages by sender's  
name, number or time.  
Delete  
Delete the message from the  
Inbox.  
Select multiple You can choose to Select one by  
one or Select all. You can press  
,
to Select/Undone the operations on  
multiple messages. Checkboxes  
will be marked on the left of the  
Extract  
numbers  
Opens the list of numbers  
available in the message. In this list,  
the  
L
option opens a pop-up  
selected message. Press  
L
window showing the following  
Options to delete the selected  
messages, or you can move them  
to My favourites.  
options:  
Save  
Update existing  
Dial  
Send message  
3. Press  
,
to enter the next screen whereby the  
message details will be displayed. Press  
,
Reply the message by SMS or MMS or press  
Add to  
blacklist  
When you add the contact to the  
blacklist, you will not receive call/  
message from this contact  
anymore.  
Move to my  
favourite  
Move the selected message to My  
Favourites  
.
36  
Messages  
mesage, or press  
following operations:  
L
Options to carry out the  
Move to spam  
box  
Move the selected message to  
spam box  
.
Resend  
Resend the message to the recipient.  
When you select Forward the  
contents of the selected message will  
appear on the message editor. You  
may edit the message before  
sending.  
Details  
View information of the message  
such as date, time and sender.  
Extract the sender's number from  
the message and dial the number.  
Forward  
,
Dial  
Sent  
The Sent box allows you to save the messages you  
Delete  
Delete the message from the Sent  
box.  
have sent successfully.  
1. In idle mode, press  
,
to enter the main menu.  
Archive to  
SIM (if  
applicable  
)
Move the selected message to the  
SIM card.  
2. Select Messages Sent and press  
>
,.  
If there are messages in the Sent box, they will  
be listed on the screen.  
3. Press  
selected, its contents will be displayed on the  
screen. Press View to view the selected  
+/-  
to select a message. When a message is  
Move to my  
favourites  
Move the selected message to My  
,
Favourites  
.
Messages  
37  
Details  
View information of the message  
such as date and time.  
Move to my  
favourites  
Move the selected message to My  
Favourites  
.
Select  
multiple  
You can choose to Select one by one  
Details  
View information of the message  
such as date and time.  
or Select all. You can press  
,
to  
Select/Undone the operations on  
multiple messages. Checkboxes will  
be marked on the left of the selected  
Outbox  
The Outbox allows you to save the messages you  
have not sent successfully.  
1. In idle mode, press  
2. Select Messages Outbox and press  
message. Press  
L
Options to delete  
the selected messages, or you can  
move them to My favourites.  
,
to enter the main menu.  
>
,.  
4. Press  
,
to enter the next screen whereby the  
If there are messages in the Outbox, they will be  
listed on the screen.  
message details will be displayed. Press  
Resend to resend the selected mesage, or press  
Options to carry out the following  
operations.  
,
3. Press  
selected, its contents will be displayed on the  
screen. Press View to view the selected  
message, or press Options to carry out the  
following operations:  
+/-  
to select a message. When a message is  
L
,
L
Forward  
When you select Forward  
,
the  
contents of the selected message will  
appear on the message editor. You  
may edit the message before sending.  
Resend  
Resend the message to the recipient.  
When you select Forward the  
Forward  
,
Delete  
Delete the message from the Outbox.  
contents of the selected message will  
appear on the message editor. You  
may edit the message before  
sending.  
Archive to  
SIM (if  
applicable  
)
Move the selected message to the  
SIM card.  
38  
Messages  
Delete  
Delete the message from the Sent  
box.  
Details  
View information of the message  
such as date and time.  
Move to my  
favourites  
Move the selected message to My  
Drafts  
Favourites  
.
List the messages that were created and saved but  
were not sent, and messages that were  
automatically saved before you were able to save  
or send them when you exit from the message  
editor.  
Details  
View information of the message  
such as date and time.  
Select  
multiple  
You can choose to Select one by one  
or Select all. You can press  
,
to  
Select/Undone the operations on  
multiple messages. Checkboxes will  
be marked on the left of the selected  
Select a message from the Draft box and press  
,
View or press Options to: Send, Edit Delete, Details,  
L
,
Select multiple. If you select View, the subsequent  
procedures would be similar to the Inbox  
operations.  
message. Press  
L
Options to delete  
the selected messages, or you can  
move them to My favourites.  
My favourites  
This menu contains all the messages received and  
saved in the phone memory via Move to my favourite  
option.  
1. In idle mode, press  
2. Select Messages > My favourites and press  
4. Press  
,
to enter the next screen whereby the  
message details will be displayed. Press  
Forward to forward the selected message or  
press Options to carry out the following  
operations.  
,
L
,
to enter the main menu.  
Resend  
Resend the message to the recipient.  
Delete the message from the Outbox.  
Move the selected message to My  
,.  
If there are messages in My favourites, they will  
be listed on the screen.  
Delete  
Move to my  
favourites  
3. Press  
+/-  
to select a message. When a message  
Favourites  
.
is selected, its content will be displayed on the  
Messages  
39  
 
screen. Press  
messages or press  
following operations:  
,
View to view the selected  
Select  
multiple  
You can choose to Select one by one  
or Select all. You can press to  
Select/Undone the operations on  
multiple messages. Checkboxes will  
be marked on the left of the selected  
L
Options to carry out the  
,
Details  
View the information of the message  
such as date, time and sender.  
message. Press  
the selected messages, or you can  
move them to My favourites.  
L
Options to delete  
Reply  
The sender's number will be used as  
the destination number automatically  
and the message editor will be  
activated. Enter your reply and send  
the message.  
4. Press  
,
to enter the next screen whereby the  
details will be displayed. Press  
L
Options to  
carry out the following operations:  
Forward  
Delete  
When you select Forward  
,
the  
Details  
Reply  
View information of the message  
such as date, time and sender.  
contents of the selected message will  
appear in the message editor. You  
may edit the message before sending.  
The sender's number will be used as  
the destination number automatically  
and the message editor will be  
activated. Enter your reply and send  
the message.  
Delete the message from My  
Favourites.  
Restore  
location  
Move the message to the original  
location where the message is sent or  
received.  
Forward  
Delete  
When you select Forward  
,
the  
contents of the selected message will  
appear in the message editor. You  
may edit the message before sending.  
Dial  
Extract the sender's number from  
the message and dial the number.  
Delete the message from My  
Favourites.  
40  
Messages  
Add to  
blacklist  
When you add the contact to the  
blacklist, you will not receive call/  
message from this contact anymore.  
Restore  
location  
Move the message to the original  
location where the message is sent or  
received.  
Move to my  
favourite  
Move the selected message to My  
Dial  
Extract the sender's number from  
the message and dial the number.  
favourites  
.
Details  
View information of the message,  
such as date, time and sender, etc.  
Spam box  
This menu allows you to filter messages after the  
firewall has been set. When the firewall is activated,  
any message from a person on your blacklist will go  
to the spam SMS box automatically.  
Dial  
Call the sender of the message.  
Select  
multiple  
You can press  
,
to select/cancel the  
operations on multiple messages.  
Checkboxes will be marked on the  
left of the selected message. You  
can delete the selected messages.  
SIM archive  
In the menu, you can see the read and unread  
messages saved in the SIM Card. Press  
,
View to  
Templates  
This menu allows you to select a message saved as  
a SMS or MMS template. You can create, send,  
modify and delete your preset messages.  
view the selected messages or press  
carry out the following operations:  
L
Options to  
Options  
Reply  
Description  
Reply the message.  
E-mail  
Forward  
Forward the message to other  
recipients.  
Your phone can send and receive e-mail messages,  
provided this service is included in your  
subscription. You must already have an e-mail  
account and have received the settings from your  
Delete  
Delete the message.  
Messages  
41  
   
email service provider. In some cases, your mobile  
phone service provider may also provide an e-mail  
service.  
Outbox  
The menu lists all the e-mails you have sent. Press  
L
to: Edit, View, Delete, Delete all.  
Create e-mail  
Check mail  
To write an e-mail, select Email > Create. Enter the  
address (To), a copy (Cc), or blind copy (Bcc), Subject  
and the e-mail Content. When you have finished  
The menu allows you to connect to your mailbox  
and to download the e-mails. This might bring up a  
message requesting airtime. Select Yes to continue  
and receive new e-mails.  
writing your e-mail, press  
following:  
L
to access the  
Settings  
Save  
Save the message in the draft box  
without sending it.  
This menu allows you to edit e-mail's Account  
Settings or Activate one of the available profiles by  
pressing  
press  
the editing screen, press  
L
. Use  
or numeric keypad to edit the content. In  
to return, press to  
+
/
-
key to access the menu list,  
Send  
Send the e-mail.  
,
Inbox  
,
L
This menu allows you to connect to your mailbox  
Save and  
R
to Clear. You may edit the following  
and download the e-mail headers. Press  
Receive the e-mails. You may then select an e-mail  
header and press to access the following  
L
to  
details:  
Menu  
Description  
L
Profile name  
To name the profile.  
options: View, Delete, Reply, Reply all, Forward, Delete  
all, Receive.  
E-mail address To enter an e-mail address.  
Drafts  
User ID  
To enter a login name.  
To enter the password.  
The menu lists all the e-mails you have saved but  
Password  
not sent. Press  
L
to: Edit, View, Delete, Delete all.  
42  
Messages  
channel numbers. It gives you access to the options  
listed below.  
Number of  
mails received received at a time.  
To define the number of mails  
at a time  
Options  
Description  
Incoming  
server  
To set the POP information used  
to receive e-mails.  
Reception Select to turn on/off the reception of  
new cell broadcast messages.  
Outgoing  
server  
To set the SMTP information used  
to send e-mails.  
Topics  
Add, change or delete channels.  
<Add new>: Press  
,
Add to add a new  
channel.  
SMTP  
To turn on/off the authentication.  
Change: Edit a channel number.  
Delete: Delete a channel in the channel  
list.  
authentication  
Type  
To select POP3 or IMAP.  
Exit  
Memory status  
You will be exited from the e-mail menu.  
This feature allows you to see how much memory  
space remains for messages in your phone and SIM  
card.  
Advanced  
Cell Info  
SMS timer  
This is a network service which allows you to  
receive text messages of various contents, such as  
news, traffic, etc. These messages are provided by  
the network to the subscribers within a certain  
network area. If this service is available, the  
network will provide you with the broadcast  
You may set a specific time to send an edited text  
message to a particular contact.  
This menu allows you to select Add to send text  
messages at specific times and display such  
messages in a list on the screen.  
Select Add to enter into the SMS editing screen.  
Press  
,
to open the contacts list and select a  
contact, or enter the phone number directly and  
Messages  
43  
 
set message sending options. You can set the date  
and time to send the message.  
When you select a message from the list of text  
messages configured for sending at specific times,  
Call voice mail  
When you receive a voice mail, the phone will send  
you an alert. You can then call your voice mailbox  
number to retrieve your voice mail.  
In idle mode, long press  
mailbox directly. If the number is empty, you will be  
prompted to enter the number.  
you can press  
message or press  
following operations:  
,
View to view the details of the  
1
to call your voice  
L
Options to carry out the  
Voice mail number  
Delete  
Delete the message.  
Generally, you can obtain two sets of numbers  
from your network provider:  
Delete all  
Delete all messages.  
number for the caller to leave a message (this  
number can also used for Call Forwarding)  
number for you to retrieve your voice  
messages  
When you enter a message detail screen, you can  
press Send to send the message to the recipient  
directly or press Option to carry out the  
following operations:  
,
L
Edit  
You can edit the contents, contact  
or date.  
Settings  
SMS  
Delete  
Delete the message.  
Select Messages > Settings > SMS to open the list of  
SMS accounts. Press  
settings:  
Service center number  
This menu allows you to save and edit the SMS  
service center number of your home network. If  
the service center number is empty, you will not be  
able to send any SMS.  
L
Reset to edit the SMS  
Voice mail  
This menu allows you to set your voice mailbox  
number and listen to voice messages your  
correspondents have left for you.  
You can forward your calls to your voice  
mailbox (the phone number for callers to leave  
a message) via the Call forwarding feature.  
44  
Messages  
 
Validity period  
Allows you to select the duration by which your  
messages will be stored in the service center. You  
Storage location  
You can press Change to change the preferred  
storage location of your messages: SIM card  
,
can select from: 1 hour  
Maximum (default). Press  
This option is useful when your recipient is not  
connected to the network and is not able to  
receive your messages immediately.  
,
12 hours  
,
1 day  
,
1 week and  
(Default) or Mobile phone.  
+/-  
to select a value.  
Send and save  
You can press  
,
to set this option On or Off. This  
option allows you to select whether or not to send  
and save your message.  
MMS  
This feature is subscription dependent.  
This menu allows you to set your MMS center and  
personalize your MMS settings. The options  
include:  
Delivery report  
You can select  
,
to set this option On or Off. This  
option allows you to set whether or not to notify  
you the send status of your messages: successfully  
sent to the recipient, or not sent successfully.  
Profiles  
You can select or edit the parameters.  
Sender visibility  
This feature is subscription dependent.  
You can press  
,
Change to set this option On or off.  
Signature  
You can select  
It is used to set if your identity will be visible when  
MMS is sent.  
,
to set this option On or Off  
(Default is Off). If set to On, it opens an editor  
where you can enter your signature. The signature  
will be added to the end of your message before it  
is sent to your recipient.  
Priority  
This option allows you to set the priority level of  
your MMS. You can set Low  
Delivery report  
,
Normal (default) or High  
.
You can press  
When set to On, a report will be sent to notify you  
if the MMS has been delivered to the recipient.  
,
Change to set this option On or off  
.
If the SMS is too long after adding the  
signature, the signature will be ignored.  
Messages  
45  
Read report  
You can press  
,
Change to set this option On or off.  
When set to On, a report will be sent to notify you  
if the MMS has been read by the recipient.  
Expiry time  
Allows you to select the duration by which your  
MMS will be stored in the MMS center. You can  
choose from 6 hours, 12 hours, 1 day, 1 week or  
Maximum (default).  
Retrieval  
Allows you to select Automatic, Deferred, Auto in  
home network when downloading of MMS messages.  
Auto page turn over  
You can press  
,
Change to set this option On or off.  
46  
Messages  
carry out the following operations to  
selected file:  
a
9. My files  
Options  
Description  
Send the selected file: Via bluetooth  
and Via MMS  
Send  
.
This menu allows you to store the files in different  
folders (Pictures, Sounds, Videos, Others) to facilitate  
more efficient management of files in your phone  
and the memory card. In addition, you can obtain  
information regarding your phone and memory card,  
such as the availability of free memory, memory  
utilized and total memory size via the Memory status  
option.  
Advanced  
Cut: Similar to copy, but the original  
file will be deleted.  
Copy: Copy the selected file to  
another folder.  
Edit: Modify or edit the selected  
picture. Press  
+/-  
and , to select  
your edit options.  
After installing a Micro SD card, you can find two  
folders under My files Phone and Micro SD card.  
:
Rename  
Details  
Modify the name of the selected file.  
Pictures  
Display detailed information of the  
selected photo, such as last  
modified date, file size, etc.  
When you enter this menu, the photos which you  
have taken using the phone's camera as well as  
pictures you have downloaded via MMS, WAP, BT,  
or USB will be displayed in a list.  
1. Select My files > (Phone or Micro SD card) > Pictures  
and press  
2. Press View  
open the selected folder or press  
,
to enter the menu.  
Open to view the selected picture/  
Options to  
,
/
L
My files  
47  
 
Use  
As contact ID: If you select this option,  
the phonebook list will be displayed.  
After you have selected a contact  
Select  
multiple  
Select one by one: select the picture  
one by one and then Cut, Copy or  
Delete them.  
from the phonebook, press  
to associate the picture to the  
selected contact.  
L
Select  
Select all: select all the pictures and  
then Cut, Copy or Delete them.  
Only available for picture of  
176*220 or smaller.  
As wallpaper: If the selected photo is  
176*220 or smaller, it will be  
displayed as wallpaper in its original  
size.  
Delete  
Delete the selected picture.  
Slide show  
If you select this option, the screen  
will display the full screen view of all  
the pictures in the form of  
slideshow every 4 seconds. Press  
any key to exit from the slide show  
mode.  
Change view You can select to view the pictures  
in List view Grid view or Full screen  
,
.
Sort  
Sort the pictures and folders by  
name or date.  
48  
My files  
3. The folder options include:  
Send  
The available options are: Via  
bluetooth and Via MMS  
.
Rename  
Modify the name of the selected  
folder.  
Advanced  
Cut: Similar to copy, but the original  
file will be deleted.  
Copy: Copy the selected file to  
another folder  
Details  
Delete  
Display detailed information of the  
selected folder.  
Use  
You can set the audio file: As  
Delete the selected folder.  
ringtone or As Contact ID  
.
Change view Select List view or Grid view.  
Rename  
Details  
Modify the name of the selected  
file.  
Sort  
Sort the pictures and folders by  
name or date.  
Display detailed information of the  
selected audio file, such as last  
modified date, file size, etc.  
Sounds  
When you enter this menu, the sounds which you  
have stored or downloaded via MMS, WAP, BT, or  
USB will be displayed in a list.  
1. Select My files > (Phone or Micro SD card) > Sounds  
and press  
2. Press Play  
Delete  
Delete the selected audio file.  
Change view  
Sort  
Select List view or Grid view.  
Sort the audios and folders by  
name or date.  
,
to enter the menu.  
,
/
Open to play the selected audio file/  
open the selected folder or press  
to carry out the following operations to a  
selected file:  
L
Options  
Select multiple Select one by one: select the audio  
files one by one and then Cut, Copy  
or Delete them.  
Select all: select all the audio files  
and then Cut, Copy or Delete them.  
My files  
49  
3. The folder options and their operations are the  
Details  
Delete  
Display detailed information of the  
selected video, such as last modified  
date, file size, etc.  
same as Pictures menu.  
Videos  
Delete the selected video.  
When you enter this menu, the videos which you  
have recorded using the phone's camera as well as  
videos you have downloaded via MMS, WAP, BT,  
or USB will be displayed as a list.  
Change view You can select to view the video  
files in List view Grid view  
,
.
Sort  
Sort the videos and folders by name,  
date, or size.  
1. Select My files > (Phone or Micro SD card) > Videos  
and press  
2. Press  
,
Play/  
to enter the menu.  
Open to play the selected video/  
Options  
Select  
multiple  
Select one by one: select the videos  
one by one and then Cut, Copy or  
Delete them.  
Select all: select all the videos and  
then Cut, Copy or Delete them.  
,
open the selected folder or press  
L
to carry out the following operations to a  
selected file:  
Options  
Description  
3. The folder options and their operations are the  
same as Pictures menu.  
Videos are played in the middle of the screen. A  
status bar is displayed at the top of the screen. The  
keypad operations when playing videos are as  
follows:  
Send  
Send the selected file: Via bluetooth  
and Via MMS  
.
Advanced  
Cut: Similar to copy, but the original  
file will be deleted.  
Copy: Copy the selected file to  
another folder.  
Key  
,
Operation  
Rename  
Modify the name of the selected file.  
Start/pause the playback.  
Long press to rewind.  
<
50  
My files  
card to a computer and format it to FAT32 before  
using it for the first time with X600.  
>
Long press to fast forward.  
Exit/return to an upper menu level.  
Return to idle screen.  
R
)
Others  
You can save all other files into this folder. The file  
and folder options and their operations are the  
same as the Pictures menu.  
Memory status  
All memory capacity, used memory capacity and  
free memory capacity between all memory capacity  
used in both the mobile phone and memory card  
will be displayed.  
Memory card  
The phone has a micro SD memory card slot to  
increase the phone's memory. The phone supports  
FAT16 and FAT32 format for 1GB capacity, and  
supports FAT32 format for 2GB capacity.  
Select My files  
>
Micro SD card  
>
Memory card. You can  
select Uninstall to safely remove memory card from  
the phone, and select Format to format it.  
For 2GB capacity, in order to ensure the card can  
be recognized by the phone, please connect the  
My files  
51  
 
information of the event, such as subject, location,  
start date, start time, end date, end time, reminder  
and repeat method.  
10. Business  
If the memory space for events is full, the phone  
will prompt you that there is no more space.  
Calendar  
When editing date and time, the phone will  
display the default or the selected date and  
time. You can edit or confirm them directly.  
This menu displays the calendar. You can select  
Day view, Week view or Month view. You can  
create new appointments, view appointments list,  
delete or modify appointments in the calendar. The  
calendar stores the alarm date and time of every  
event. If the current date and time correspond with  
the date and time of the event, the phone will emit  
an alarm (if needed), and the screen will display a  
prompt to indicate that a new event has arrived.  
You can create a maximum of 30 events. The list  
will display part of the contents. Once you have  
The maximum length of an event is 100  
characters.  
Reminder  
On time, 5 min. before, 15 min. before, 1 hour before,  
and 1 day before.  
Repeat method  
The phone provides the following repeat methods:  
Once, Daily, Weekly, Monthly and Annually.  
selected an event, you can press  
detailed information.  
,
to view the  
When you change the date and time of your  
phone, the next alert will be repeated based on  
the modified date and time of the phone.  
1. Enter the menu. Press  
,
to access View or  
press to access the options menu.  
L
2. The options include: View week/month, New  
event, Go to date, Advanced.  
New event  
The list of events will be displayed. When you add  
a new event, you need to enter the corresponding  
When you switched off the phone, the organizer  
alert will be postponed until the next time you  
52  
Business  
 
switch on the phone. For repeated events, only  
the latest one will be alerted.  
Snooze  
The alarm rings again 5 minutes  
later. Select On or Off.  
Alarm  
Calculator  
This phone supports 24-hour alarm.  
The available options are:  
Your mobile phone has a built in calculator. Enter  
the numbers with the keypad.  
Options  
Description  
Options  
Description  
Addition  
+
-
Simple  
alarm  
A simple alarm rings only once. Set  
the alarm status to On or Off by  
Subtraction  
Multiplication  
Division  
pressing  
you need to specify the alarm time  
and press to confirm.  
,
Change. When set to On,  
>
,
<
Reccurent  
alarm  
A recurrent alarm rings according  
to the day you specify in a week. Set  
the alarm status to On or Off by  
,
*
Equals  
To toggle between negative and  
positive figures.  
pressing  
,
Change. When set to On,  
L
> %  
Options  
Add a percentage symbol.  
Calculate a remainder of a division.  
Add a decimal point.  
you need to specify the Time and  
Repetition. For example, if you select  
Sunday and Monday, the alarm clock  
will ring every Sunday and Monday.  
L
Options  
> Modular  
Then press  
,
to confirm.  
#
Alarm tone Select an alarm tone.  
Business  
53  
Rename  
Change the name of the selected  
file.  
The maximum length of the numbers and the  
result is 9 digits. The result of the calculator is  
indicative.  
Memo recorder  
Voice recorder  
This menu allows you to record a voice memo.  
From the main menu, select Business > Voice  
recorder. Then you can press  
size and select the Storage location. When you set  
the MMS size On, the recording will stop if it  
exceeds the MMS size limit.  
To start recording, press  
process, the recorded time will be displayed in real  
time. To stop recording, press and the file will be  
saved in My files > Sounds. Then you could press  
This menu allows you to record a memo. Set the  
time to play it as a reminder. From the main menu,  
select Business > Memo recorder.  
To start recording, press  
process, the recorded time will be displayed in real  
time. To stop recording, press and the file will be  
,
New. During the  
L
to set the MMS  
,
saved. Then you can edit the start date, start time,  
and reminders for this recording.  
,
Record. During the  
For a recorded memo, press  
the following options:  
L
Options to access  
,
,
Options  
Delete  
Description  
to play the recorded file or press  
access the following options:  
L
Options to  
Delete the selected file.  
Send the selected file.  
Send  
Options  
Description  
Rename  
Change the name of the selected  
file.  
New  
episode  
Make another recording.  
Edit  
Edit the start date, start time and  
reminders of the selected file.  
Delete  
Send  
Delete the selected file.  
Send the selected file.  
Details  
View the detailed information of the  
selected file.  
54  
Business  
 
Reset. and you can exit the menu by pressing the  
Back.  
R
Stopwatch  
Your phone features a stop watch and the  
minimum unit is 0.1 second.  
The starting time is 00:00.0, in the format  
“mm:ss.n”, where mm stands for minutes of the  
watch, which can be any number from 0 to 59; ss  
stands for seconds, a number between 0 and 59; n  
stands for 0.x second, x being any number from 0  
to 9. The stopwatch will start the timing when you  
The count-down timer will switch on  
automatically and emit an alarm at the end of  
the count-down even if your phone is in idle  
mode.  
Unit converter  
This application allows you to convert many types  
of units such as exchange rate, area, energy, mass,  
power, pressure, temperature and volume.  
press  
Pause, to resume, press  
press Stop.  
,
Start. You can pause the timing, press  
,
,
Go, to stop the timing,  
R
Select the type of unit and input the figure and then  
press  
,
Change to calculate the result.  
Countdown  
Press  
#
key to enter the decimal point.  
This feature is very similar to the alarm clock,  
except that you will be alerted of the remaining  
time, and the phone will emit an alarm at the end of  
the count-down. The alarm tone is the same as  
your alarm clock.  
The minimum time is 1 minute. The format of the  
time is hh:mm:ss, and the maximum time input is 23  
hours 59 minutes 59 seconds.  
Firewall  
This function provides a simple and quick method  
for you to avoid nuisance calls and SMS. Blacklist  
contains a list of phone numbers from which you  
do not wish to receive calls or SMS.  
Select Business > Firewall > Set and choose between  
the following options:  
You can edit the time timer and start the  
countdown by pressing  
countdown, press  
,
Start. To stop  
• Status: Status icon, Event or None.  
• Activate: On or Off.  
,
Pause, to reset, press L  
Business  
55  
 
To add the phone numbers into the black list, select  
Black list, select Add new, then you can carry out the  
following operations:  
Create task  
This menu allows you to create a new task. There  
are 2 types of tasks: Phone Call and Task. Select New  
task and press  
options:  
,
Select to access the following  
Option  
Operation  
New number Open the phone number editor,  
enter the new number and save the  
number into the black list.  
Call/Task  
Allow you to create a Phone Call  
or Task. Press to select.  
</>  
Subject  
Create a subject for your task.  
Contacts  
Open the phonebook list and select  
a phone number for saving into the  
black list.  
Call number  
(Available  
only in Phone  
call)  
Enter the phone number directly,  
or press  
,
Select for:  
Contacts: Display the list of  
contacts for calling.  
Enter number: Enter the  
number.  
You can press  
the black list, then press  
following operations:  
+/  
-
to select a particular number in  
L
Options to carry out the  
Change  
Open the phone number editor, to  
edit the selected number in the  
black list.  
Display on  
idle  
Set On or Off to choose whether  
the event will display on screen in  
idle mode. Press  
</  
>
to select.  
Delete  
Delete the selected number in the  
black list.  
Set Reminder Set On or Off to choose whether  
you want to receive the alert.  
When set to On, you need to set  
Task  
the alert date and time. Press  
confirm.  
,
to  
This menu allows you to create, store and manage  
events in your task list.  
After you have finished editing, press  
your new task.  
,
to Save  
56  
Business  
Manage task  
This menu allows you to manage your tasks . Select  
a task, then press  
,
to View the task or Call the  
contact (depending on if it is the Task or Phone Call)  
or press  
LOption to access the following options:  
Mark as  
(Not) Done  
Mark a tick on the task as done or  
untick for not done.  
Edit  
Edit the selected task.  
Delete  
Delete the selected task.  
Delete all tasks on the list.  
Delete all  
STK  
The availability of the features in this menu depends  
on whether or not your SIM card supports STK. If  
your SIM card supports STK function, the STK  
menu will be displayed on the screen.  
Business  
57  
 
New contacts  
To create a new SIM/phone contact:  
11. Contacts  
Enter new contact Press  
,
and select New  
Contacts  
Your phone features two phonebooks. The SIM  
phonebook is located on your SIM card and the  
number of entries you can store depends on the  
SIM card. The second phonebook (Smart  
phonebook) is integrated in the phone memory and  
the maximum number of name cards you can store  
is 2000 (a namecard can consist of a name, 4 phone  
numbers, groups, email address, address, etc.).  
The SIM card is the default phonebook, but the  
entries in the two phonebooks are combined,  
sorted and displayed as a list. When you add a new  
contact to your phonebook, the new contact will  
only be added to the phonebook you have selected.  
Enter contact  
details  
Enter the following for SIM  
card contacts.  
• Name  
• Number  
Enter the following for  
onboard  
contacts:  
• Name  
• General  
• Mobile  
• Home  
• Work and etc  
phonebook  
You can store up to 2000 name cards, provided  
other features in the phone such as Calendar,  
Sounds, Pictures, and Videos, etc. did not use up  
a large amount of the phone's memory space.  
Store the new  
contact  
Press  
,
Save.  
To create a contact, you must enter at least a  
phone number.  
Most of the fields are free-text, which means you  
can enter alphanumeric data using the text entry  
functions of your mobile phone (for more  
58  
Contacts  
 
information on text entry, see "Text and number  
entry" on page 15).  
Send  
Contact  
Send the selected record: via SMS or  
via Bluetooth.  
Copy to  
phone/SIM phone/SIM.  
Copy the SIM/phone entry to  
View contacts  
In the phonebook, you can display the details of a  
contact by selecting it. Then press  
the details of the selected contact or press  
Move to  
Similar to copy, but the source  
,
View to view  
phone/SIM record will be deleted after copying.  
L
Options to carry out the following operations:  
Select  
multiple  
Select one contact at a time or  
select all contacts.  
Options  
Description  
New  
contact  
Create a new contact.  
View groups  
The View groups feature allows you to organize  
your contacts so that you can send messages to all  
the members of the group. From the Contacts  
menu, select View groups and the list of groups is  
displayed.  
Send  
message  
Send a SMS or MMS to the contact.  
Call  
Call the contact.  
Edit before Change the contact’s information  
call  
View  
before calling the contact.  
Select a group and  
,
Viewoto add and display the  
Call  
handsfree  
Call the contact by handsfree mode.  
group members or press  
following group options:  
L
Options to access the  
Delete  
Delete the contact.  
Options  
Description  
Add to  
blacklist  
Add the contact into the blacklist.  
Rename  
Rename the group.  
Contacts  
59  
 
Advanced  
This menu provides you with advanced features so  
that you can view and edit your contacts:  
Send message  
Reset  
Send an SMS or MMS to  
members of a group.  
Restore the group to default  
settings.  
Options  
Description  
Choose contact list  
Special numbers  
This menu allows you to keep a list of useful  
numbers such as your own numbers, service  
numbers, voicemail and SOS numbers.  
• Default contact list:  
Switch  
contact  
list  
between SIM, Phone or  
All.  
• Default contact location:  
Select the new contact  
entry saved on the SIM  
or phone memory.  
Options  
Description  
My number  
View, edit or clear your own  
phone number.  
Copy contact  
Copy to SIM: Copy all the  
entries to SIM.  
Emergency  
Display the emergency phone  
number.  
Copy to phone: Copy all the  
entries to Phone.  
Voice mail  
Dial the number for your  
voice mail service provider.  
Move contact  
Delete all contacts  
Move to SIM: Move all the  
entries to SIM.  
Move to phone: Move all the  
entries to Phone.  
Service numbers  
This entry of the SIM  
phonebook allows you to  
select one of the available  
services provided by your  
operator and to copy it into  
the selected phonebook.  
Delete all contacts.  
60  
Contacts  
Car  
Ring volume  
Ringtones  
12. Profiles  
Level 8  
Default  
Alert type  
Vibrate and ring  
On  
Your mobile phone has been preconfigured with  
the following modes:  
Key sound  
• Personal (default) • Car  
• Flight  
Backlight level  
Ring volume  
Alert type  
Level 4  
• Home  
• Silent  
• Meeting  
• Outdoors  
Flight  
No volume  
None  
You can activate and modify all the modes, except  
the Flight mode and Silent mode. These 2 modes can  
only be activated and viewed.  
The profiles and their respective parameters are as  
follows:  
Key sound  
Off  
Backlight level  
Ring volume  
Ringtones  
Level 3  
Personal  
Ring volume  
Ringtones  
Level 9  
Default  
Home  
Level 4  
Default  
Alert type  
Vibrate and ring  
On  
Alert type  
Vibrate and ring  
On  
Key sound  
Key sound  
Backlight level  
Level 3  
Backlight level  
Level 3  
Profiles  
61  
   
Profile selection  
Meeting  
Outdoors  
Silent  
Ring volume  
Ringtones  
Silence  
Default  
Vibrate  
Off  
To select a different profile:  
Go to Profiles  
menu  
Press , to enter the main menu  
from the idle mode and select  
Profiles.  
Alert type  
Key sound  
Backlight level  
Ring volume  
Ringtones  
Select the  
desired  
profile.  
Press + or - and ,Select.  
Level 4  
Level 9  
Default  
Vibrate and ring  
On  
To change the settings of a profile:  
Press L Change. You may select:  
Options  
Description  
Alert type  
Ring volume  
Ringtones  
Select from 9 volume levels.  
Select the ringtone for Calls,  
Alarm1,  
Key sound  
Backlight level  
Ring volume  
Alert type  
Alarm2,  
Alarm3,  
Calendar, Messages or Cell info.  
Level 4  
Silence  
None  
Alert type  
Select an alert type: Ring only,  
Vibrate only, Vibrate and ring,  
Vibrate then ring or Silent.  
Key sound  
Set the key sound On or Off.  
Key sound  
Backlight level  
Off  
Backlight level  
Select a backlight level from  
level 1 to level 4.  
Level 2  
62  
Profiles  
devices appears, select the device you wish to  
establish a connection with.  
13. Connectivity  
If you do not intend to use the Bluetooth  
feature for some time, you should deactivate it  
in order to conserve battery power.  
This menu provides you with more features to set  
up a connection with these external devices.  
Bluetooth menu  
Bluetooth  
Options  
Description  
Your phone supports Bluetooth wireless  
technology, allowing connection to a compatible  
Bluetooth device. To ensure interoperability  
between other Bluetooth devices, please check  
with the manufacturers of other devices. The  
Bluetooth connection can be subjected to  
interference from obstructions such as walls or  
other electronic devices.  
To use Bluetooth connection, the device with  
which you want to establish a connection must  
support Bluetooth function. Please contact the  
device's manufacturer or its accompanied  
documentation.  
Activate  
Turn Bluetooth feature on or off.  
Search for  
devices  
Search for the external devices that  
you can connect to.  
My devices Display the bluetooth devices that  
you can connect to.  
You can select the desired device by  
pressing  
L
in the devices list. You  
can also open the Options menu of  
the device. The options are:  
Connect/Disconnect (if applicable)  
Browse files (if applicable)  
Activate/Deactivate stereo (if applicable)  
Rename  
Establish a Bluetooth connection  
To activate, press  
,
to enter the main menu from  
Delete  
the idle mode and then select Connectivity >  
Bluetooth. On the Bluetooth screen, select Activate.  
Next, select Search for devices. When the list of  
Connectivity  
63  
   
pictures via the USB cable, and the size of file  
transfer is unlimited until your memory is full.  
Settings  
Select to display more features:  
My name: edit the name of the  
device  
Visibility: choose to show or hide  
the device by select toggle On or  
Off  
When copying files from your PC to phone, first  
insert a Micro-SD memory card into your  
phone.  
My profiles: lists the phone’s  
available profiles  
When the transfer is finished, please make sure  
that you safely remove your device based on  
the instruction of your computer.  
When searching for a device, you are presented  
with a list of any devices discovered within the  
range of your Bluetooth-enabled phone. As soon as  
you select a device and a connection is made, you  
are prompted to enter a passkey in order to pair  
with the device. This passkey is supplied by the  
manufacturer of the other Bluetooth device. Refer  
to its documentation for further information. The  
passkey feature ensures that only legitimate  
connections are allowed to connect either to your  
device or to the selected device.  
Using PhilipsPhoneTools  
Besides, your phone can perform PC connections  
with  
the  
supplied  
PhilipsPhoneTools.  
PhilipsPhoneTools offers instant sychronization  
between your phone and your computer, and  
enables you to backup your mobile phone data and  
recover the data saved in the computer, receive  
SMS and edit your mobile phone contacts  
Installing PhilipsPhoneTools on your PC  
1. Insert the supplied the PhilipsPhoneTools into  
the CD drive.  
2. Run the Setup.exe program.  
3. Make selections as prompted, and installation  
starts automatically.  
USB function  
Connect your phone to a PC via USB cable, and your  
phone will then behave like a USB drive. With your  
phone, you can access files on your memory card.  
You can upload and download music, videos and  
64  
Connectivity  
 
During the installation, interruption may occur  
when your PC system detects the new software.  
Press Continue Anyway repeatedly until the  
installation resumes.  
Connecting your Phone to the PC  
1. Check that the Phone Setup wizard starts. If  
necessary, double click the PhilipsPhoneTools  
icon.  
2. Connect your phone to the PC as prompted.  
3. On your phone, select Connectivity > USB  
function > PC Sync from the main menu.  
A functional menu appears on your PC screen.  
Connectivity  
65  
14. Calls  
Save to  
existing  
Save the number in the current the  
contacts list.  
Send  
messages  
Send a message to the selected  
number. You can send by SMS or  
MMS.  
Most options described in this chapter are  
operator and/or subscription dependent and  
require either a PIN2 code or a phone code. For  
more information on PIN codes, see see "General"  
on page 70.  
Delete  
Delete  
Dial  
Delete the selected number from the  
list.  
Delete all numbers from the list.  
View calls  
This menu provides you with a list of calls you have  
missed, answered and made. The calls include All  
calls, Missed calls, Answered call, Outgoing calls and  
Rejected calls, which are displayed in chronological  
order with the most recent call at the top of the  
Call the selected number.  
Add to  
blacklist  
To add the phone number into the  
blacklist, see see "Firewall" on  
page 55.  
list. Select a call from one of the lists and press  
,
Edit  
Open the contacts list and edit the  
number if it is in the contacts list.  
Dial to call or press  
L
Options to access the  
number  
before  
dialing  
following:  
Options  
Description  
View  
View the detailed information of the  
selected call.  
Call options  
This menu allows you to configure the call settings:  
Save  
Save the number if the number is not  
in the contacts list.  
Options  
Description  
66  
Calls  
   
Auto  
answer  
Turn Auto answer on/off. When this  
function is on, the incoming call will  
be answered automatically after 10  
seconds.  
Call  
services  
The available options include:  
Call time: Display the duration of  
your calls and their charges: Total  
incoming calls, Total outgoing calls  
and Total calls.  
Call waiting: Select Enable or  
Cancel, or check Status.  
Any key  
answer  
Turn Any key answer on/off. When  
this function is on, you can answer  
incoming calls by pressing any key,  
except  
),  
R.  
This  
feature  
is  
network/  
subscription dependent.  
Minute  
reminder  
Select On or Off to activate or  
deactivate the minute reminder  
during a call. The default is Off and  
the default setting is 45 seconds.  
Own ID: Select Show ID or Hide ID  
or Set by network to determine  
your phone number or identity  
will be displayed or not to the  
called party.  
Caller ID: To check your operator  
setting of showing the identity of  
your caller.  
This  
feature  
is  
network/  
subscription dependent.  
Calls  
67  
Call  
forward  
Set the following call divert options:  
All calls, If no reply, If out of reach, If  
busy.  
• When All calls is on, all incoming  
calls will be diverted to the pre-set  
number without any reminder.  
• When If no reply is on, incoming  
calls will be diverted if the user  
does not answer.  
Cost settings: This option is  
available only when the charge  
information is included in your  
SIM card. You can view  
information of the current call and  
all recent calls. You need to enter  
the PIN2 code to manage,  
maximum cost credit and unit  
rate.  
• When If out of reach is on,  
incoming calls will be diverted to  
the pre-set number when the user  
is not connected to the network.  
• When If busy is on, calls will be  
diverted if the user is already  
online or if the call is rejected.  
You can also check the Status of  
your call diverts or Cancel all call  
diverts.  
68  
Calls  
Clear history  
This menu allows you to clear the call history in:  
Delete all/Missed calls/Answered calls/Outgoing calls/  
Rejected calls. Press  
Call  
barring  
This menu allows you to limit the  
use of your phone to specific calls by  
preventing the reception or making  
of different types of calls. To activate  
call barring, you need to enter a  
communication limit code. This  
PIN2 code will then be sent to the  
network for validation.  
,
Select to confirm deletion and  
R
Back to cancel deletion.  
Note that this operation only  
supports GSM calls.  
The types of calls you can bar are as  
follows:  
• All outgoing calls  
• All international calls  
• Only here & home  
• All incoming calls  
You can also check the Barring status  
of your call barring or Cancel barring.  
Restricted  
dialing  
This menu allows you to set the  
password to prevent the phone  
from being used by another person.  
IP number  
Dial IP prefix of your network  
operator.  
Calls  
69  
15. Settings  
Languages  
Set the display language of the  
phone.  
Time &  
date  
Display time: Select On or Off.  
When you select On, the time  
information will be displayed in  
the idle screen.  
Set time: Set the time in the  
format HH:MM.  
Set date: Set the date.  
Time format: Set the time format  
as 24 hours or 12 hours.  
Date format: Set the date format  
as YYYY/MM/DD, YYYY.MM.DD,  
DD.MM.YYYY, YYYY-MM-DD or  
DD-MM-YYYY.  
International clock: Go to the  
international clock menu and  
change the time zone.  
You can configure your X600 mobile phone to best  
suit your usage preference. You can configure the  
following settings: General, Display, Sounds and  
Connectivity.  
Enter the  
menu  
Press  
,
to enter the main menu  
from idle mode and select Settings.  
Select a  
settings  
menu  
Press or  
+
-.  
General  
This menu allows you to configure some general  
settings:  
Power-on time: Set a time for the  
phone to be switched on. You can  
select On or Off. When you select  
On, you need to enter the time  
you want your phone to be  
switched on.  
Options  
Description  
Press to set On or Off. When you  
select On, you can answer an  
incoming call simply by opening the  
flip.  
Active flip  
,
Power-off time: same as above.  
70  
Settings  
   
Security  
Shortcuts  
Displays a list of shortcut features.  
You can set a new shortcut key by  
establishing a link between a certain  
feature and a numeric or navigation  
key. You can also change or delete  
an existing shortcut key.  
PIN protection: Select On or Off.  
When you select On, you need  
to enter the PIN code when you  
switch on the phone.  
The default PIN code is network  
dependent on your service  
provider. Please contact your  
service operator for the PIN  
information.  
Speed dial  
This menu allows you to quickly dial  
the number stored in your  
phonebook. Select a number (from  
2-9) on the list to configure. You can  
set a maximum of 8 speed dial  
numbers, so that a long press on the  
numeric key will dial the number  
associated with that numeric key.  
Change PIN/PIN2: You can modify  
the password for PIN, PIN2,  
safeguard and phonelock.  
Safeguard: You can safeguard  
important information such as  
messages, contacts on your phone  
by activating safeguard. You can  
also change the safeguard  
password.  
Change safeguard password: You  
can modify the password for  
PIN, PIN2, safeguard and  
phonelock.  
Default  
storage  
Set the default storage location:  
Phone memory or Memory card for  
different applications.  
Memory  
status  
You can check the memory status of  
Contacts, Messaging and My files. You  
can also check the memory status of  
Memory card if it is inserted.  
Mainmenu Select the browse style as List or  
style Grid.  
The default safeguard and  
phonelock password is 1234.  
Settings  
71  
 
Display  
Factory  
settings  
Restore your phone settings to the  
default values.  
You may configure your phone with different  
display settings:  
Options  
Description  
Wallpaper  
Turn the wallpaper display On or  
Off.  
Themes  
Select from 2 themes.  
Backlight  
level  
Select from 4 backlight levels. You  
can select the backlight level by  
pressing  
confirm.  
+
or  
-
keys. Press  
,
to  
Backlight  
duration  
Select the backlight duration from  
60 seconds, 30 seconds and 15  
seconds.  
Greeting  
Turn greetings On or Off. When you  
select On, you can edit the greetings  
message.  
The maximum length of greetings  
is 20 Chinese words or 40 English  
characters.  
72  
Settings  
This does not apply if the ring tone you have  
chosen is one that comes as default with your  
phone.  
Sounds  
You can set your phone to operate with different  
sound profiles. For details, see ?$paratext>? on  
page 73.  
Connectivity  
Options  
Description  
Call options  
For more information, see ?Call options? on  
page 67.  
Alert type  
You can select Ring only, Vibrate only,  
Vibrate & ring, Vibrate then ring or Silent.  
Ringtones  
Select the ringtone for Calls, Alarm1  
Alarm2 Alarm3, Calendar and  
Messages, Cell info.  
Message settings  
For more information, see ?Settings? on page 47.  
Network settings  
Ring  
volume  
Select from 9 volume levels.  
The network name will be displayed on the idle  
screen. If the phone is not able to identify the  
network name, it will display the country code and  
the network code of the unknown network.  
Key sound  
Turn the key sound On or Off.  
Shutter  
sound  
Select from 3 shutter sounds. You  
can also select Off.  
Select network  
It will vary according to the search mode you have  
selected. If you select Automatic, the network will  
be searched automatically. If you select Manual, the  
search will commence only when you confirm to  
start searching.  
Search mode  
You can select Automatic or Manual.  
Lowbattery Turn the warning On or Off.  
alert  
If you have downloaded your own ring tones  
and have selected such a ring tone to be the  
alarm alert, then after you set the alarm and  
switched off the phone, the alert tone will be  
changed back to the original factory settings.  
Settings  
73  
 
Preferred Networks  
Profile name  
APN  
To name the current profile  
To enter GPRS APN.  
Preferred network list is stored in the SIM card. It  
specifies the priority by which your phone will  
register to the available network during automatic  
registration.  
Login  
To enter a login name.  
To enter the password.  
Password  
GPRS info  
1. In idle mode, press  
2. Select Settings Connectivity  
Preferred networks  
3. Press Select to enter the preferred network  
,
to enter the main menu.  
>
>
Network settings  
>
This feature allows you to monitor the amount of  
data transferred during GPRS connection.  
.
,
list. The most preferred network will be at the  
top of the list.  
4. Press  
5. You can then press  
+
/
-
to select a certain network.  
to Insert or press  
,
L
Option and select to Add to end or Delete the  
selected network.  
Browser  
Various parameters relative to browser can be set  
under this option, including WAP parameters and  
Push message.  
Connections  
GPRS profiles  
This menu allows you to configure a GPRS  
(General Packet Radio Service) connection to the  
network. The available GPRS settings are:  
Options  
Description  
74  
Settings  
International roaming - Displayed when  
your phone is registered to a network  
other than your own.  
Icons & Symbols  
In idle mode, several icons and symbols can be  
displayed on the main screen. The status, network  
and battery icons are displayed all the time. The  
rest of the icons are displayed if the feature is  
available, and not displayed if the feature is  
unavailable.  
Whether to log on GPRS - There are 2  
GPRS status which are mutually  
exclusive: GPRS network is available but  
not in use; or GPRS network is available  
and in use. The icon will be displayed  
only when you have logged on to GPRS.  
If the network symbol is not displayed, it implies  
that the network is currently unavailable. You  
may be in a bad reception area; moving to a  
different location may help.  
MMS  
-
Indicates there is  
a
MMS  
message.  
WAP Push message - Indicates there is a  
WAP push message. Go to Browser >  
Push Inbox to check it.  
Network - Network icon comprises of 2  
portions. The left portion indicates  
whether or not your phone is already  
registered with a network, and the right  
portion indicates signal strength in 5  
levels (from no signal to strongest).  
Voicemail- Indicates voice messages that  
have not been heard.  
Alarm Clock - Indicates that the alarm  
clock is activated.  
Battery - Indicates battery level with 5  
battery level indicator bars. When  
Vibration - Your phone will vibrate when  
there is an incoming call or when the  
alarm clock rings.  
charging,  
displayed.  
a
scrolling icon will be  
Firewall - Indicates that firewall feature  
is activated.  
Icons & Symbols  
75  
New event - You have a new event.  
Miss call - Indicates there is a miss call.  
Call Divert - Indicates that the call  
divert function is activated.  
Meeting - Indicates that silent mode is  
activated.  
Memory card - Indicates the memory  
card is in use.  
Bluetooth - Feature is activated.  
76  
Icons & Symbols  
borrowing your phone.Furthermore to prevent  
unauthorized use of your phone:  
Precautions  
Keep your phone in a safe place and keep  
it out of small children's reach.  
Avoid writing down your PIN code. Try  
to remember it instead.  
Radio Waves  
Your cellular mobile phone is a low  
power radio transmitter and  
receiver. When it is operating, it sends  
and receives radio waves. The radio waves  
carry your voice or data signal to a base station that  
is connected to the telephone network. The  
network controls the power at which the phone  
transmits.  
Your phone transmits/receives radio waves in the  
GSM frequency (900 / 1800 / 1900 MHz).  
• The GSM network controls transmission power  
(0.01 to 2 watts).  
Your phone complies with all relevant safety  
standards.  
• The CE mark on your phone shows compliancy  
with European electromagnetic compatibility  
(Ref. 89/336/EEC) and low voltage directives  
(Ref. 73/23/EEC).  
Switch off the phone and remove the battery if you  
are going to leave it unused for a long time.  
Change your PIN code after purchasing the phone  
and to activate call restriction options.  
The design of your phone complies with  
all applicable laws and regulations.  
However your phone may cause  
interference with other electronic  
devices. Consequently you should follow all local  
recommendations and regulations when using  
your cellular phone both at home and when away.  
Regulations on the use of cellular phones in  
vehicles and aircraft are particularly  
stringent.  
Public concern has been focused for some time on  
the possible health risks for users of cellular phones.  
The current research on radio wave technology,  
including the GSM technology, has been reviewed  
and safety standards have been drawn up to ensure  
protection from exposure to radio wave energy.  
Your cellular mobile phone is your responsibility.  
To avoid damage to yourself, to others or to the  
phone itself, read and follow all the safety  
instructions and make them known to anyone  
Precautions  
77  
Your cellular telephone complies with all  
applicable safety standards and the Radio  
Equipment and Telecommunications Terminal  
Equipment Directive 1999/5/EC.  
liquefied petroleum gas (LPG), check first that the  
vehicle complies with the applicable safety rules.  
In areas where you are requested to turn off radio  
transmitting devices, such as quarries or other  
areas where blasting operations are in progress.  
Check with the vehicle manufacturer that  
electronic equipment used in your  
vehicle will not be affected by radio  
energy.  
Always switch off your phone  
Inadequately protected or sensitive electronic  
equipment may be affected by radio energy. This  
interference can lead to accidents.  
Before boarding an aircraft and/or when  
packing the phone in your luggage: the use  
of mobile phones in an aircraft may be  
dangerous for the operation of the aircraft, disrupt  
the mobile phones network and may be illegal.  
In hospitals, clinics, other health care  
centres and anywhere else where you may  
be in the close vicinity of medical  
equipment.  
Pacemakers  
If you have a pacemaker:  
• Always keep the phone more than 15 cm from  
your pacemaker when the phone is switched on,  
in order to avoid potential interference.  
• Do not carry the phone in a breast pocket.  
• Use the ear opposite to the pacemaker to  
minimize the potential interference.  
• Switch off your phone if you suspect that  
interference is taking place.  
In areas with a potentially explosive  
atmosphere (e.g. petrol stations and  
also areas where the air contains dust  
particles, such as metal powders).  
Users of hearing aids  
If you are a user of a hearing aid, consult your  
physician and hearing aid manufacturer to learn  
whether your particular device is susceptible to  
cellular phone interference.  
In a vehicle transporting flammable products (even  
if the vehicle is parked) or a vehicle powered by  
78  
Precautions  
period of time as well as avoiding unnecessary  
navigating in the menus will also help to save the  
battery's energy for longer phoning and stand-by  
performances.  
Improved performance  
In order to improve the performance of your  
phone, reduce radio energy emission, reduce  
battery consumption and ensure safe  
operation adhere to the following guidelines:  
For the optimal and satisfactory operation  
of the phone, you are recommended to  
use the phone in the normal operating  
position (when not using in hands-free  
mode or with a hands-free accessory).  
• Do not expose your phone to extreme  
temperatures.  
Treat the phone with care. Any misuse will void  
the International Guarantee.  
• Do not immerse the phone in any liquid; if your  
phone is damp, switch it off, remove the battery.  
and let them dry for 24hrs before using them  
again.  
To clean the phone, wipe it with a soft cloth.  
• Placing and receiving calls consumes the same  
amount of battery energy. However, the mobile  
consumes less energy in idle screen when kept in  
the same place. When in idle screen and while  
you are moving, your phone consumes energy to  
transmit updated location information to the  
network. Setting the backlight for a shorter  
Battery information  
Your phone is powered by  
battery.  
a
rechargeable  
• Use specified charger only.  
• Do not incinerate.  
• Do not deform or open the battery.  
• Do not allow metal objects (such as keys in your  
pocket) to short circuit the battery contacts.  
• Avoid exposure to excessive heat (>60°C or  
140°F), moisture or caustic environments.  
You should only use Philips authentic  
battery and accessories, as the use of any  
other accessories may damage your  
phone and may be dangerous, and will  
make all guarantees for your Philips phone  
null and void. The use of an incorrect type of  
battery may also cause an explosion.  
Make sure damaged parts are replaced immediately  
by a qualified technician and that they are replaced  
with genuine Philips replacement parts.  
Precautions  
79  
phone and also avoid using it with an ambient  
temperature over 40°C.  
Do not use your phone while driving  
For your phone, the socket-outlet shall be installed  
near the phone and shall be accessible.  
Speaking on the telephone while driving  
lowers your concentration, which can be  
dangerous. Adhere to the following  
guidelines:  
Environmental care  
• Give your full attention to driving. Pull off the  
road and park before using the phone.  
• Respect the local regulations in countries where  
you drive and use your GSM phone.  
• If you want to use your phone in a vehicle, install  
the hands-free car kit which is designed for that  
purpose.  
• Ensure that your phone and car kit do not block  
any air bags or other security devices fitted in  
your car.  
Remember to observe the local  
regulations regarding the disposal of the  
packaging materials, exhausted batteries  
and old phone and please promote  
recycling.  
Philips has marked the battery and packaging with  
standard symbols designed to promote the  
recycling and appropriate disposal of your eventual  
waste.  
The use of an alarm system to operate a vehicle's  
lights or horn to indicate incoming phone calls is  
prohibited on public roads in some countries. Check  
local regulations.  
The labelled packaging material is  
recyclable.  
A financial contribution has been made  
to the associated national packaging  
recovery and recycling system.  
EN60950 Norm  
In case of hot weather or after a prolonged exposure  
to the sun (e.g., behind a window or a windscreen),  
the temperature of your phone's casing might  
increase, especially when featuring a metallic finish.  
Be very careful in this case when picking up your  
The plastic material is recyclable (also  
identifies the type of plastic).  
80  
Precautions  
against harmful interference in  
a
residential  
WEEE Marking in the DFU:  
installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may  
“Information to the Consumer”  
cause  
harmful  
interference  
to  
radio  
Disposal of your old product  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation.  
Your product is designed and manufactured with  
high quality materials and components, which can  
be recycled and reused.  
If this equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and on, the  
user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
When this crossed-out wheeled bin  
symbol is attached to a product it  
means the product is covered by the  
European Directive 2002/96/EC  
Please inform yourself about the local  
separate collection system for  
electrical and electronic products.  
-- Reorient or relocate the receiving antenna.  
-- Increase the separation between the equipment  
and receiver.  
-- Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Any changes or modifications not expressly  
approved by the party responsible for compliance  
could void the user’s authority to operate the  
equipment.  
Please act according to your local rules and do not  
dispose of your old products with your normal  
household waste. The correct disposal of your old  
product will help prevent potential negative  
consequences for the environment and human  
health.  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two  
conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
FCC Compliance Statement  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
Precautions  
81  
warmer place and try again. In other cases, please  
contact your phone supplier.  
Troubleshooting  
The phone does not switch on  
Your battery seems to over heat  
You might be using a charger that was not intended  
for use with your phone. Make sure you always use  
the Philips authentic accessory shipped with your  
phone.  
Remove/reinstall the battery. Then charge the  
phone until the battery icon stops scrolling. Unplug  
from charger and try to switch on the phone.  
Your phone doesn’t return to the idle screen  
Long press the hangup key or switch off the phone,  
check that the SIM card and the battery have been  
installed correctly and switch it on again.  
Your phone doesn’t display the phone  
numbers of incoming calls  
This feature is network and subscription  
dependent. If the network does not send the  
caller’s number, the phone will display Call 1 or  
Withheld instead. Contact your operator for  
detailed information on this subject.  
The network symbol is not displayed  
The network connection is lost. Either you are in a  
radio shadow (in a tunnel or between tall buildings)  
or you are outside the network coverage area. Try  
from another place, try to reconnect to the network  
(especially when abroad), check that the antenna is  
in place if your mobile has an external antenna, or  
contact your network operator for assistance/  
information.  
You can’t send text messages  
Some networks don’t allow message exchanges  
with other networks. First check that you entered  
the number of your SMS centre, or contact your  
operator for detailed information on this subject.  
The display doesn’t respond (or the  
You have the feeling that you miss some  
calls  
display responds slowly) to key presses  
The display responds more slowly at very low  
temperatures. This is normal and does not affect  
the operation of the phone. Take the phone to a  
Check your call divert options.  
82  
The display shows INSERT SIM  
Check that the SIM card has been inserted  
correctly. If the problem remains, your SIM card  
may be damaged. Contact your operator.  
When attempting to use a feature in the  
menu, the mobile displays NOT  
ALLOWED  
Some features are network dependent. Therefore,  
they are only available if the network or your  
subscription supports them. Contact your  
operator for detailed information on this subject.  
Your phone is not charging  
If your battery is completely flat, it might take  
several minutes of pre-charge (up to 10 minutes in  
some cases) before the charging icon is displayed  
on the screen.  
83  
Data connect kit  
Philips Authentic  
Accessories  
Some accessories, such as a standard battery and a  
charger, are included as standard accessories in  
your mobile phone package. Additional accessories  
may also be provided or sold separately. Package  
contents may therefore vary.  
Provides easy data connection to your Philips  
mobile phone. The USB cable enables high-speed  
communication between your phone and your  
computer. The provided software allows you to  
download pictures and melodies and to  
synchronize your contacts and appointments.  
Deluxe Headset  
To maximize the performance of your Philips  
phone and not to void the warranty, always  
purchase Philips Authentic Accessories that are  
specially designed for use with your phone.  
Philips Consumer Electronics cannot be held  
liable for any damages due to use with non  
authorized accessories.  
The integrated answer button offers you a simple  
way to answer your calls. Simply answer an  
incoming call by pressing the button or long press  
to reject the incoming call.  
Charger  
Charges your battery in any AC outlet. Small  
enough to carry in a briefcase/handbag.  
84  
Trademark Declaration  
T9® is a trademark of Tegic  
Communications Inc.  
Tegic Euro. Pat.  
App. 0842463  
Bluetooth™ is  
mark owned  
telefonaktiebolaget  
a
trade-  
by  
L M Ericsson, Sweden and  
licensed to Philips.  
PHILIPS and PHILIPS’ Shield  
Emblem are registered  
trademarks of Koninklijke  
Philips Electronics N.V.  
manufactured by Shenzhen  
Sang Fei Consumer  
Communications Co., Ltd.  
under  
license  
from  
Koninklijke  
Philips Electronics N.V.  
85  
Specific Absorption Rate Information  
International standards  
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO  
RADIO WAVES  
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits  
for exposure to radio frequency (RF) energy defined by the international standards. These recommendations have  
been established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the  
Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring the  
protection of all persons, regardless of age and health.  
The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption  
Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is  
2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by IEEE  
Std 1528 for the head.  
Tests for SAR have been conducted using recommended operating positions with the mobile phone transmitting  
at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest  
certified power level, the actual SAR levels of the mobile phone while operating are generally below the maximum  
SAR value. This is because the phone is designed to operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a base station antenna, the lower the power  
output.  
While there may be differences between the SAR levels of various phones and at various positions, they all meet  
the international protection standards for exposure to radio waves.  
The highest SAR value for this Xenium X600 model phone when tested for compliance against the standard was  
0,279 W/kg for ICNIRP recommendation and 0,391 W/kg for IEEE Std 1528.  
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use a  
headset. The purpose of those precautions is to take the mobile phone away from the head and the body.  
For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used whit an  
accessory that contains no metal and that positions the handset a minimum of 1.5cm from the body. Use of other  
accessories may not ensure compliance with FCC RF exposure guidelines.  
86  
Specific Absorption Rate Information  
 
Workmanship During The Limited Warranty  
Period?  
Limited warranty  
1. What Does This Limited Warranty Cover?  
During the limited warranty period, Philips or  
its authorized service representative will, at its  
option either repair or replace, without charge  
for parts or labour, a materially defective  
Product with new or refurbished parts or  
Product and return such repaired or replaced  
Product to the Consumer in working  
condition. Philips will retain defective parts,  
modules or equipment.  
Philips warrants to the original retail purchaser  
(“Consumer” or “You”) that this Philips  
cellular product and all accessories originally  
provided by Philips in the sales package  
(“Product”) are free from defects in materials,  
design and workmanship under normal use in  
accordance with the operating instructions and  
pursuant to the following terms and  
conditions. This limited warranty extends only  
to the Consumer for Products purchased and  
used in the original country of purchase. The  
limited warranty is valid only in Philips’  
intended country of sales of the product.  
Repaired or replaced Product will be covered  
by this limited warranty for the balance of the  
original limited warranty period or ninety (90)  
days from the date of repair or replacement  
whichever is longer. Repair or replacement of  
Product, at Philips’ option is your exclusive  
remedy.  
2. How Long is The Limited Warranty Period?  
The limited warranty period for the Product  
extends for ONE (1) YEAR from the date of  
purchase of the Product, documented by valid  
proof of purchase. The limited warranty for  
original Philips rechargeable battery extends  
for six (6) months from the date of purchase.  
4. What is Not Covered By This Limited  
Warranty?  
This limited warranty does not cover:  
a) Product that has been subjected to  
misuse, accident, shipping or other  
physical damage, improper installation,  
abnormal operation handling, neglect,  
3. What Will Philips Do if The Product is Not  
Free From Material Defects in Materials and  
87  
inundation, fire, water or other liquid  
intrusion; or  
a) Return the Product to an authorized  
service center of Philips. You may contact  
the local Philips office for the location of  
the nearest authorized service center.  
b) The SIM card must be removed from the  
Product before it is given to Philips. Philips  
assumes no liability for damaged or loss of  
the SIM card or the data contained  
therein.  
c) If the Product failure is not covered by this  
limited warranty, or this limited warranty  
is inapplicable, void or invalid due to any  
terms and conditions stated herein, the  
Consumer will be charged for the cost of  
repair or replacement of the Product and  
all other related cost incurred in repairing  
or replacing the Product.  
b) Product that has been damaged due to  
repair, alteration, or modification by  
anyone not authorized by Philips; or  
c) Product that has reception or operation  
problems caused by signal conditions,  
network reliability or cable or antenna  
systems; or  
d) Product defects or problems caused by  
uses with non-Philips products or  
accessories; or  
e) Product which warranty/quality stickers,  
product serial number or electronic serial  
number has been removed, altered or  
rendered illegible; or  
f) Product purchased, used, serviced, or  
shipped for repair from outside the  
original country of purchase, or used for  
commercial or institutional purposes  
(including but not limited to Products used  
for rental purposes); or  
d) IMPORTANT - you are required to return  
the Product together with a valid proof of  
purchase which must identify the point of  
purchase, date of purchase, Product  
model and Product serial number clearly.  
g) Product returned without valid proof of  
purchase or which proof of purchase has  
been altered or is illegible.  
6. Other Limitation: This Warranty is The Entire  
Agreement.  
h) Normal wear and tear or Force Majeure.  
EXCEPT FOR THE EXPRESS WARRANTIES  
SET FORTH ABOVE AND THOSE IMPLIED  
BY LAW AND WHICH CANNOT BE  
5. How Do You Get Warranty Service?  
EXCLUDED  
OR  
MODIFIED  
BY  
88  
AGREEMENT, PHILIPS PROVIDES NO  
OTHER WARRANTY WHETHER EXPRESS  
OR IMPLIED (WHETHER BY STATUTE,  
UNDER THE OPERATION OF LAW OR  
OTHERWISE) AND SPECIALLY DISCLAIMS  
ANY WARRANTY OF SATISFACTORY  
QUALITY MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE.  
PHILIPS’ TOTAL LIABILITY FOR DAMAGES  
RELATING TO OR ARISING OUT OF THE  
PURCHASE OR USE OF THE PRODUCT,  
REGARDLESS OF THE TYPE OR CAUSE OF  
SUCH DAMAGE OR THE FORM OR  
CHARACTERISATION OF THE CLAIM  
ASSERTED (E.G. CONTRACT OR TOPIT),  
SHALL NOT EXCEED THE ORIGINAL  
PURCHASE PRICE PAID FOR THE  
PRODUCT.  
CLAIMS BY THIRD PARTIES) RESULTING  
FROM PURCHASE OR USE OF THE  
PRODUCT, TO THE FULLEST EXTENT  
ALLOWED BY LAW, WHETHER OR NOT  
PHILIPS HAS BEEN ADVISED OF THE  
POSSIBILTY OF SUCH DAMAGES. THESE  
LIMITATIONS  
SHALL  
APPLY  
NOTWITHSTANDING THE FAILURE OF  
THE ESSENTIAL PURPOSE OF ANY LIMITED  
REMEDY.  
This limited warranty represents the complete  
and exclusive agreement between the  
Consumer and Philips with respect to this  
cellular Product and it supercedes all prior  
agreements between the parties, oral or  
written, and all other communications  
between the parties relating to the subject  
matter of this limited warranty. No carrier,  
retailer, agent, dealer, employee, thereof, or  
employee of Philips is authorized to make  
modifications to this limited warranty and you  
should not rely on any such representation.  
HOWEVER IN NO EVENT SHALL PHILIPS BE  
LIABLE FOR ANY PUNITIVE, SPECIAL,  
INCIDENTAL,  
INDIRECT  
OR  
CONSEQUENTIAL DAMAGES (INCLUDING  
BUT NOT LIMITED TO THE LOSS OF USE,  
LOSS  
OF  
TIME,  
INCONVENIENCE,  
This limited warranty does not affect the  
Consumer’s statutory rights under applicable  
national laws in force.  
COMMERIAL LOSS, LOST PROFITS, LOST  
BUSINESS OPPORTUNITIES, COST OF  
SUBSTITUTION OF GOODS OR SERVICES,  
INVESTMENTS, DAMAGE TO GOODWILL  
OR REPUTATION, OR LOSS OF DATA AND  
89  
We hereby declare that all essential radio test  
suites have been carried out and that the above  
named product is in conformity to all the essential  
requirements of Directive 1999/5/EC.  
The conformity assessment procedure referred to  
in Article 10 and detailed in Annex V of Directive  
1999/ 5/EC has been followed related to articles 3.1  
and 3.2 with the involvement of the following No-  
tified Body: CETECOM ICT Services GmbH, Un-  
terturkhelmer Strabe6-10, 66117, Saarbrucken,  
Germany.  
Declaration of  
conformity  
We,  
Shenzhen Sang Fei Consumer  
Communications Co., Ltd.  
11 Science and Technology Road,  
Shenzhen Hi-tech Industrial Park,  
Nanshan District, Shenzhen 518057  
China  
Identification mark: 0682  
declare under our sole responsibility that the  
product  
June 12, 2008  
Xenium X600  
Cellular Mobile Radio GSM 900/1800/1900  
TAC: 35520202  
Quality Manager  
to which this declaration relates, is in conformity  
with the following Standards:  
SAFETY : EN 60950-1: 2001+A11:2004  
HEALTH: EN50360: 2001  
EMC: ETSI EN301 489-7 v 1.2.1; ETSI  
EN 301 489-17 v1.2.1  
SPECTRUM: ETSI EN 301 511 v9.0.2;  
ETSI EN 300 328 v1.6.1  

Troy Bilt 8 HP User Manual(1)
Smart Technologies Education Software Installer 2011 User Manual
Simaudio MOON CD 1 User Manual
Seagate EE252 SERIES ST940817AM User Manual
Seagate Cheetah ST3450857FC User Manual
SanDisk USSD 5000 User Manual
Samsung SGH J630 User Manual
Philips CD 750 User Manual
Orange Micro 9210286 User Manual
Nokia ESERIES E63 User Manual