Philips SE650 User Manual

Register your product and get support at  
SE650  
SE655  
Quick start guide  
Connect  
1
Install  
2
Enjoy  
3
Connect  
1
Connect the base station  
1. Place the base station in a central location near the telephone line socket and  
electricity socket.  
2. Connect the line cord and the power cable to their corresponding connectors at the  
back of the base station.  
3. Connect the other end of the line cord and power cable to their respective sockets.  
Install  
2
Insert rechargeable batteries and charge  
Insert batteries  
Charge handset for 24 hours  
A
B
Configure your phone (if necessary)  
1. Press o OK to display a list of countries.  
2. Scroll n up and down to find your country.  
3. Press o OK to confirm your selection.  
(Waiting… will be displayed while the default line settings and menu language for  
the selected country are automatically configured.)  
4. The product now goes to the Date/Time selection menu. Enter the current time  
and current date (HH:MM DD/MM/YY). Press u to move the cursor left, or press d  
to move it right.  
If using the 12 hour format, just after setting the minutes, use * to switch between  
AM and PM.  
5. Press o OK to confirm.  
Enjoy  
3
Make a call  
Dial the number (maximum 24 digits) and press t or l.  
OR  
Press t or l to take the line, and dial the number.  
Answer a call  
When the phone rings, press t or l.  
End a call  
To end a conversation, press h.  
Adjust earpiece or speaker volume  
During a call, scroll n to select from level 1 to level 5.  
Set the ring tone  
There are 15 ring tones available on your handset.  
1. Press m, scroll n to Personal Set, and press o Select.  
2. Scroll n to Handset Tones and press o Select, then scroll n to Ring Tones  
and press o Select.  
3. Scroll n to your desired melody. The melodies will play as you scroll to them.  
4. Press o Select to set the ring tone.  
A validation tone is emitted and the screen returns to the previous menu.  
Store a contact in the phonebook  
1. Press m. Phonebook is highlighted; press o Select.  
2. New Entry is highlighted; press o Select.  
3. Enter Name is displayed. Enter the name of the contact (maximum 14 characters)  
and press o OK.  
4. Enter Number is displayed. Enter the number (maximum 24 digits) and press  
o OK.  
A validation tone is emitted.  
Access phonebook  
1. Press d and scroll n to browse the phonebook.  
2. To view the details, press o View.  
Call from the phonebook  
1. Press d in idle mode.  
2. Scroll n to a phonebook entry.  
3. Press t.  
The call is initiated.  
Listen to messages recorded on the answering machine (for SE655 only)  
Press e on the base station to turn on the answering machine (the LED is turned on).  
The outgoing message is played.  
Press p on the base station to play phone messages (the first recorded message will  
be played first).  
Press f to skip the current message and play the next message.  
Press b to go back to the previous message (if pressed within 1 second of current  
message playback).  
Press b to replay current message (if pressed after 1 second of current message  
playback).  
Press -+ to adjust speaker volume during message playback.  
Press x to delete the current message.  
Long press x to delete all old messages.  
Press e again to turn off the answering machine (the LED is turned off).  
Refer to your SE655 User Manual for details about the answering machine functions.  
Troubleshooting  
For more information, please refer to the User Manual that came with your phone.  
Problem Solution  
There’s no dialling tone!  
No power: Check the connections.  
Batteries are empty: Charge the batteries.  
Move closer to the base station.  
Wrong line cord used: Use the line cord provided.  
Line adaptor may be required: If applicable, connect  
the line adaptor to the line cord.  
Caller does not hear me  
clearly!  
Move closer to the base station.  
Move the base station at least one metre away from  
any electronic appliances.  
Searching... is displayed  
Move closer to the base station.  
Make sure that your base station is on.  
Reset your unit and restart handset registration.  
on handset and  
blinking!  
icon is  
Caller number is not  
displayed!  
Service is not activated: Check your subscription  
with your network operator.  
Welcome to Philips!  
Register your product and get support at  
Need help?  
User Manual  
Refer to the User Manual that came with your SE650/655.  
Online Help  
©2008 Koninklijke Philips Electronics N.V.  
All rights reserved  
Reproduction in whole or in part is prohibited without  
the written consent of the copyright owner  
3111 285 47041 (GB)  
UCZZ69937AZ(1)  

Sony MHC FR10 User Manual
Sony Ericsson k310c User Manual
Seagate ST3500320NS User Manual
Seagate SAVVIO ST9300605SS User Manual
Samsung SPINPOINT MP4 HM640JJ User Manual
Samsung RL A760 User Manual
Samsung Cell Phone GT N7100 User Manual
Rosewill RCW608 User Manual
Pioneer PRODUCT INFORMATION BULLETIN DRM 1804X User Manual
Pantech C530 User Manual