Register your product and get support at
AJ3138
EN User manual
l
m
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
n
Battery usage CAUTION – To prevent battery leakage which
may result in bodily injury, property damage, or damage to
the unit:
•
•
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and alkaline,
etc.).
•
Remove batteries when the unit is not used for a long time.
o
p
Apparatus shall not be exposed to dripping or splashing.
Do not place any sources of danger on the apparatus (e.g.
liquid filled objects, lighted candles).
q
Where the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
Warning
•
•
•
•
•
•
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical equipment.
Keep this apparatus away from direct sunlight, naked flames or heat.
Never look into the laser beam inside this apparatus.
Ensure that you always have easy access to the power cord, plug or
adaptor to disconnect this apparatus from the power.
Notice
This product complies with the radio interference requirements of
the European Community.
Any changes or modifications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product
it means that the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste. Correct disposal of
your old product helps to prevent potential negative consequences
for the environment and human health.
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed with normal household
waste.Please inform yourself about the local rules on separate
collection of batteries because correct disposal helps to prevent
negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound recordings,
may be an infringement of copyrights and constitute a criminal
offence. This equipment should not be used for such purposes.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde
netdelen er derfor ikke frakoplet nettet så lenge apparatet er
tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
2 Your clock radio
Congratulations on your purchase, and welcome to Philips!To fully
benefit from the support that Philips offers, register your product at
Introduction
With this clock radio, you can:
•
•
•
•
enjoy the FM radio
know the time
wake up to buzz, favorite radio tone, or recorded sound
set two alarms to ring at different time.
What’s in the box
Check and identify the contents of your package:
•
•
•
•
•
•
Main unit x 1
AC power adaptor x 1
Decorative ring x 1
Knob x 2
User manual x 1
Quick start guide x 1
Overview of the main unit
a
k
b
c
d
e
f
j
i
l
m
n
o
h
g
a
b
c
volume
Adjust volume.
mic
Built-in microphone.
•
•
repeat alarm/brightness control
Repeat the alarm.
Adjust the display brightness.
•
•
d
tuning
Tune to a radio station.
•
•
e
f
Display panel
radio
Turn on/off the radio.
g
Battery compartment
Antenna (Inside the battery compartment)
h
i
DC IN jack
set/scan
Set the clock.
Scan radio stations.
Program radio stations.
•
•
•
j
+/-
•
•
•
•
Tune to a radio station.
Select a preset radio station.
Adjust time.
Select time format.
k
l
/
•
•
•
Set the alarm timer.
View the alarm time.
Turn on/off the alarm.
rec/play
Record a piece of sound.
Play the recorded sound.
•
•
m
n
o
display
•
•
•
Toggle between different information.
nap
Select the nap time.
sleep
Set sleep timer.
3 Get started
Caution
•
Use of controls or adjustments or performance of procedures other
than herein may result in hazardous radiation exposure or other
unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Caution
•
•
•
Risk of explosion! Keep batteries away from heat, sunshine or fire.
Never discard batteries in fire.
Risk of product damage! When the apparatus is not used for long
periods, remove the battery.
Batteries contain chemical substances, so they should be disposed
of properly.
1
2
Open the battery compartment.
Insert 3 AAA batteries (not supplied) with correct polarity
(+/-) as indicated.
»
The screen lights up for 5 seconds.
3
Close the battery compartment.
Tip
•
When the unit is powered by battery, the screen lights up for 5
seconds after any operation.
Connect power
Caution
•
•
•
Risk of product damage! Ensure that the power voltage corresponds
to the voltage printed on the back or underside of the apparatus.
Risk of electric shock! When you unplug the AC adaptor, always pull
the plug from the socket. Never pull the cord.
Before connecting the AC adaptor, ensure you have completed all
other connections.
1
Connect the power cord to
the DC IN jack on the back of the main unit
the power socket.
•
•
Set time and date
1
In clock mode, press set/scan.
The hour digits begin to blink.
»
2
3
4
5
6
7
8
Press +/- to set hour.
Press set/scan to confirm.
Repeat steps 2-3 to set the minute.
Repeat steps 2-3 to select 12 hour or 24 hour format.
Repeat steps 2-3 to set the year.
Repeat steps 2-3 to set the date.
Repeat steps 2-3 to set the month-day display mode.
4 Listen to radio
Tune to a radio station
1
2
Press radio to turn on the radio.
Rotate tuning clockwise or counter-clockwise to tune to a
radio station.
Program radio stations automatically
Note
•
You can program a maximum of 20 preset radio stations.
1
Press radio repeatedly to turn on the radio.
2
Press and hold set/scan for 2 seconds.
All available stations are programmed in the order of waveband
reception strength.
»
»
The first programed radio station broadcasts automatically.
Program radio stations manually
Note
•
You can program a maximum of 20 preset radio stations.
1
2
Press radio repeatedly to turn on the radio.
Rotate tuning clockwise or counter-clockwise to tune to a
radio station.
3
Press set/scan.
The number begins to blink.
»
4
5
6
Press +/- repeatedly to select a preset number.
Press set/scan to confirm.
Repeat the above steps to program more stations.
Tip
•
To overwrite a programmed station, program another station in its
place.
Select a preset radio station
1
2
Press radio to turn on radio.
Press +/- to select a radio station.
5 Set the alarm timer
You can set two separate alarms. For the alarm tone, you can select the
buzz, the FM radio, or a piece of recorded sound.
1
Before you start, ensure that the time is set correctly.
2
Press
or
/
.
»
is displayed.
3
Press set/scan.
The hour digits begin to blink.
»
4
Press +/- to set the hour.
5
Press set/scan to confirm.
The minute digits begin to blink.
»
6
7
8
Repeat steps 3-5 to set the minute.
Repeat steps 3-5 to select days for the alarm.
Repeat steps 3-5 to select buzz or radio or recorded sound for
the alarm.
»
The apparatus turns on automatically at the set time and rings with
buzz or radio or recorded sound.
Tip
•
•
You can also press and hold
The gentle wake up function is designed for buzzer source only.
/
to start alarm setting.
Turn on/off the alarm timer
Note
•
Ensure that you already set the alarms successfully.
Press or repeatedly to turn on or off the alarm timer.
»
»
If the alarm timer is turned on,
If the alarm timer is turned off,
or
or
appears.
disappears.
Repeat alarm
1
When the alarm rings, press repeat alarm/brightness control.
The alarm repeats ringing minutes later.
»
Tip
•
You can press repeat alarm/brightness control again to adjust
interval to repeat alarm (5, 10, 15, 20, 25, or 30 minutes).
Stop alarm ring
1
When the alarm rings, press the corresponding or
The alarm stops but the alarm settings remain.
.
»
View the alarm settings
1
Press
/
or display.
6 Other features
Set the sleep timer
You can set the clock radio to turn off automatically after a certain
period of time.
1
Press sleeprepeatedly to select time (in minutes).
The apparatus turns off automatically after the set period of time.
»
To turn off the sleep timer:
1
Press sleeprepeatedly until [OFF] (off)appears or press radio.
is displayed when sleep timer is on and disappears when it is
»
off.
Set nap timer
1
Press nap repeatedly to select the nap time (in minutes).
The alarm rings after the set period of time.
»
To turn off the nap timer
Press nap repeatedly until [OFF] is displayed.
1
Record a piece of sound
Note
•
You can record for a maximum of 8 seconds.
1
Press and hold rec/play during the whole process of recording.
REC] is displayed.
»
[
»
When the sound is recorded,
is displayed.
Tip
•
Keep the sound source close to mic on the top of the unit.
•
To play the recorded sound, press rec/play.
»
is displayed.
Adjust the volume level
1
Rotate volume to increase/decrease the volume level.
Adjust display brightness
1
Press repeat alarm/brightness control repeatedly to turn on/
off the backlight of the display.
Activate the backlight blinking function
1
Press and hold repeat alarm/brightness control for 5 seconds.
The backlight blinks.
»
»
When the alarm rings next time, the backlight blinks for 3 minutes.
To deactivate the backlight blinking function
1
Press and hold repeat alarm/brightness control for 5 seconds
again.
Change the decorative ring and knobs
Note
•
You can change the decorative ring and knobs with the supplied ring
and knobs.
To change the decorative ring
1
Rotate the ring counter-clockwise.
The ring separates from the main unit.
»
2
Place the ring to be installed onto the main unit.
3
Rotate the ring clockwise.
The ring is installed.
»
To change the knobs
1
2
Pull the knobs directly out of the socket.
Plug the knobs to be installed into the sockets.
7 Product information
Note
•
Product information is subject to change without prior notice.
Specifications
Tuner (FM)
Tuning Range
Tuning grid
87.5 - 108MHz
50KHz
Sensitivity
<22 dBf
- Mono, 26dB S/N Ratio
Search Selectivity
>28dBf
<3%
Total Harmonic Distortion
Signal to Noise Ratio
>50dB
General information
Power
- AC: Model: AD39673
Input: 220 - 230V~ ,50Hz, 0.02A ,
Output: 5V, 0.2A
- DC: 3 x AAA batteries
Operation Power
Consumption
2W
Standby Power Consumption 1W
Dimensions
- Main Unit (W x H x D)
102 x 102 x 102 mm
Weight
- With Packing
- Main Unit
0.6 kg
0.3 kg
8 Troubleshooting
Caution
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.com/support).When
you contact Philips, ensure that your apparatus is nearby and the model
number and serial number are available.
No power
•
•
•
Ensure that the Mains cord is connected securely.
Ensure that there is power at the AC Mains.
Ensure that the batteries are inserted correctly.
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power plug, then turn on
the unit again.
Poor radio reception
•
Increase the distance between the apparatus and your TV or
VCR.
•
•
Fully extend the antenna.
Connect an outdoor antenna instead.
Timer does not work
•
•
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
•
Power has been interrupted or the power plug has been
disconnected.
•
Reset the clock/timer.
En Chile Importado por : Philips Chilena S.A.
Av. Sta. Maria, 0760 - Providencia - Santiago, RUT 90.761.000-4
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
AJ3138_12_UM_V3.0
W
|