Optimus CR 320 User Manual

Cat. No. 12-1621  
OWNER’S MANUAL  
Please read before using this equipment.  
CR-320  
Big-Display AM/FM Clock Radio  
with Dual Alarms  
PREPARATION  
1. Press the tab and lift off the battery  
compartment cover on the bottom of  
the clock radio.  
CONNECTING TO  
AC POWER  
Plug the clock radio’s power cord into a  
standard AC outlet. The display flashes  
and the BATTERY SENTINEL indicator  
light next to the time display turns on  
(see “Installing a Back-Up Battery”).  
illus of battery compartment  
cover removal  
2. Snap the clock radio’s battery con-  
tacts onto the battery’s terminals,  
then insert the battery into the com-  
partment. The BATTERY SENTI-  
NEL indicator turns off.  
illustration of cord  
being plugged in  
illustration of battery  
installation  
INSTALLING A BACK-UP  
BATTERY  
Note: If the BATTERY SENTINEL  
indicator remains lit, press SNOOZE  
to reset the indicator. If that does not  
work, replace the back-up battery.  
Your clock radio uses a 9V battery (not  
supplied) to operate the clock and alarm  
during a power failure. The display turns  
off, but the clock keeps the time for at  
least 8 hours, and the alarm will sound  
(if set) for at least 10 minutes after pow-  
er fails. For the best performance, we  
recommend an alkaline battery, such as  
RadioShack Cat. No. 23-553.  
3. Replace the cover.  
The BATTERY SENTINEL indicator  
lights if the back-up battery is not in-  
stalled or needs to be replaced.  
Warning: Always dispose of old batter-  
ies promptly and properly. Do not bury  
or burn them.  
Caution: Use only a fresh battery of the  
required size and recommended type.  
Note: To prevent unnecessary drain on  
the battery, install it only after connect-  
ing the clock radio to AC power.  
3
OPERATION  
SETTING THE CLOCK  
PLAYING THE RADIO  
Setting the clock is simple. While hold-  
ing down TIME SET, repeatedly press (or  
hold down) SLOW FORWARD or SLOW  
REVERSE. The time on the display ad-  
vances or reverses by 1 minute each  
time you press the button. (The PM indi-  
cator lights for PM hours.)  
1. Set ON/OFF/AUTO/ALARM to ON.  
illustration of ON/OFF/AUTO/  
ALARM set to ON  
2. Set AM/FM to the desired band.  
illus of REVERSE  
and FORWARD  
locations  
illustration of AM/FM  
location  
To rapidly set the time, hold down FAST  
FORWARD or FAST REVERSE.  
Notes:  
• The clock radio has a built-in AM  
antenna. For the best AM recep-  
tion, rotate the radio.  
ADJUSTING THE DISPLAY  
BRIGHTNESS  
• The clock radio’s power cord acts  
as the FM antenna. For the best  
FM reception, fully extend the  
power cord.  
To change the brightness of the display,  
set DIMMER LOW/HIGH on the side of the  
clock radio to LOW or HIGH.  
3. Rotate TUNING to the desired sta-  
tion.  
illustration of DIMMER  
LOW/HIGH location  
illustration of TUNING location  
4
4. Rotate VOLUME to the desired  
3. While holding down ALARM SET,  
repeatedly press SLOW FOR-  
WARD or SLOW REVERSE to  
advance or reverse the alarm  
time. Or, to rapidly advance or  
reverse the alarm time, hold down  
ALARM SET and press FAST FOR-  
WARD or FAST REVERSE.  
sound level.  
illustration of VOLUME location  
5. To turn off the radio, set ON/OFF/  
AUTO/ALARM to OFF.  
illustration of ALARM SET,  
REVERSE and FORWARD  
locations  
USING THE ALARM  
Setting the Alarm Time  
4. Set ALARM 1+2 to ALARM 2 and  
repeat Step 3 to set the second  
alarm time. The ALARM 2 indicator  
lights on the lower left of the clock  
display.  
You can set the clock radio so an  
alarm sounds or the radio plays at one  
or two different times (ALARM 1 and  
ALARM 2).  
5. Set  
ON/OFF/AUTO/ALARM  
to  
Follow these steps to set the alarm  
times.  
ALARM to have the buzzer sound  
at the set time(s), or to AUTO to  
have the radio turn on at the set  
time(s). The alarm indicator lights  
on the lower left of the clock dis-  
play.  
1. Set  
ON/OFF/AUTO/ALARM  
to  
AUTO or ALARM.  
2. Set ALARM 1+2 to ALARM 1.The  
ALARM 1 indicator lights on the  
upper left of the clock display.  
6. Rotate VOLUME for the desired  
alarm or radio volume.  
7. Set ALARM 1+2 to 1, 1+2, or 2 to  
have the alarm sound at either or  
both set times. The indicators for  
the selected alarm(s) light.  
illustration of ALARM 1+2  
location  
To silence the buzzer or radio when it  
sounds, set ON/OFF/ALARM to OFF. If  
you do not turn off the alarm or radio,  
it continues to sound for 59 minutes.  
5
Remember to set ON/OFF/AUTO/  
ALARM to ALARM or AUTO if you want  
it to go off at the set wake-up time the  
next day.  
USING THE SLEEP  
TIMER  
Press SLEEP to set the sleep timer so  
the radio plays for 59 minutes and  
then automatically turns off.  
To display the set wake-up time, set  
ALARM 1+2 to 1 or 2, then press  
ALARM SET.  
To set a sleep time of less than 59  
minutes, hold down SLEEP and re-  
peatedly press (or hold down) SLOW  
FORWARD or SLOW REVERSE until  
the display shows the desired min-  
utes. (Or, hold down FAST FORWARD  
or FAST REVERSE to rapidly change  
the minute setting.)  
USING SNOOZE  
To silence the alarm, but have it  
sound again in a few minutes, press  
SNOOZE. This silences the alarm for  
about 7 minutes. You can use this fea-  
ture as many times as you want.  
To turn off the radio before the set  
sleep time has elapsed, set ON/OFF/  
AUTO/ALARM to ON, then to OFF, AU-  
TO, or ALARM.  
To see the time (minutes and sec-  
onds) since you first pressed SNOOZE,  
hold down SNOOZE.  
6
CARE AND MAINTENANCE  
To enjoy your clock radio for a long time:  
THE FCC WANTS YOU TO  
• Keep the clock radio dry. If it gets  
wet, wipe it dry immediately.  
KNOW  
Your clock radio might cause TV or ra-  
dio interference even when it is operat-  
ing properly. To determine whether your  
clock radio is causing the interference,  
turn off your clock radio. If the interfer-  
ence goes away, your clock radio is  
causing the interference. Try to elimi-  
nate the interference by:  
• Use and store the clock radio only in  
normal temperature environments.  
• Handle the clock radio gently and  
carefully. Don’t drop it.  
• Keep the clock radio away from dust  
and dirt.  
• Wipe the clock radio with a damp  
cloth occasionally to keep it looking  
new.  
• moving your clock radio away from  
the TV or another radio  
• connecting your clock radio to an  
outlet that is on a different electrical  
circuit from the TV or another radio  
Modifying or tampering with the clock ra-  
dio’s internal components can cause a  
malfunction and invalidate its warranty.  
If your clock radio is not performing as it  
should, take it to your local RadioShack  
store for assistance.  
• contacting your local RadioShack  
store for help  
If you cannot eliminate the interference,  
the FCC requires that you stop using the  
clock radio.  
7
SPECIFICATIONS  
Bands ........................................................................................... AM: 530–1710 kHz  
FM: 88–108 MHz  
Power Output .............................................................................. 320 mW (maximum)  
Speaker .............................................. 3 Inch (7.6 cm) Ferrite, Dynamic-Type, 8 Ohm  
Alarm ................................................................................................................. 96 dB  
Power Requirements ................................................................ 120V AC, 60 Hz, 6 W  
Back-up Battery ............................................................................................... 9V DC  
3
3
1
Dimensions (HWD) ................................ 2 /5 × 9 /5 × 6 /8 Inches (65 × 240 × 155 mm)  
Weight ............................................................................................. 1 lb 12 oz (790 g)  
Specifications are typical; individual units might vary. Specifications and designs are  
subject to change and improvement without notice.  
Limited Ninety-Day Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal  
use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized Ra-  
dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WAR-  
RANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WAR-  
RANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR  
RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY,  
LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT  
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAM-  
AGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR  
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or con-  
sequential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as  
proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law:  
(a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the  
same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a  
refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the  
performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the  
original warranty period. You will be charged for repair or replacement of the product made after the expiration of the  
warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, mis-  
use, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration,  
lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack  
Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation,  
shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102  
We Service What We Sell  
3/97  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
11A98  
Printed in the Philippines  

ZALMAN ZMNC1500B User Manual
Winegard Cell Phone Accessories TN 2055 User Manual
SonicWALL Email Security 300 User Manual
Siemens A65 User Manual
Seagate Momentus ST93205620AS User Manual
Seagate CHEETAH ST173404LCV User Manual
Seagate CHEETAH 15K5 SCSI ST373455LW User Manual
Scientific Atlanta AT8450 User Manual
Samsung SGH I727R User Manual
Samsung SGH 600 User Manual