Nokia TWIST 7705 User Manual

User Guide  
TM  
Nokia 7705 Twist User Guide  
9215957  
Issue 1 EN  
© 2009 Nokia. All rights reserved.  
Nokia, Nokia Connecting People, Navi, and Nokia Original Accessories are trademarks or registered trademarks of Nokia Corporation.  
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or  
tradenames of their respective owners.  
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written  
permission of Nokia is prohibited.  
cdma2000 is a registered certification mark of the Telecommunications Industry Association.  
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.  
microSD is a registered trademark of the SD Card Association, Inc.  
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products  
described in this document without prior notice.  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE  
RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES  
HOWSOEVER CAUSED.  
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND,  
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES  
THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.  
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia  
dealer for details, and availability of language options.  
Export controls  
This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries.  
Diversion contrary to law is prohibited.  
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated  
with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia  
does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these  
materials. Nokia does not provide any warranty for the third-party applications.  
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA  
NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE  
ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC  
or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance,  
contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user’s  
authority to operate this equipment.  
9215957/Issue 1 EN  
Contents  
 
S a f e t y  
Safety  
Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving  
should be road safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could affect performance.  
SWITCH OFF IN RESTRICTED AREAS  
Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
ACCESSORIES AND BATTERIES  
Use only approved accessories and batteries. Do not connect incompatible products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
About Your Device  
The wireless device (Nokia 7705 TwistTM) described in this guide is approved for use on the following Verizon Wireless networks: CDMA  
800 and 1900 MHz. Contact Verizon Wireless for more information about networks.  
When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including  
copyrights.  
Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred.  
Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites  
through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you  
select to access such sites, you should take precautions for security or content.  
Warning: To use any features in this device, the device must be switched on. Do not switch the device on when wireless device use  
may cause interference or danger.  
Remember to make back-up copies or keep a written record of all important information stored in your device.  
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.  
Network Services  
To use the device you must have service from a wireless service provider. Many of the features require special network features. These  
are not available on all networks; other networks may require that you make specific arrangements with your service provider before  
you can use the network services. Using network services involves transmission of data. Check with your service provider for details  
about fees in your home network and when roaming in other networks. Your service provider can give you instructions and explain  
what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some  
networks may not support all language-dependent characters and services.  
Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not  
appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and  
icons. Contact your service provider for more information.  
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as Media  
Center and email messaging require network support for these technologies.  
Safety  
5
           
I n s e r t o r R e m o v e t h e B a t t e r y  
Section 1: Get Started  
Topics Covered  
• Insert or Remove the Battery  
• microSD Card  
• Switch Your Device On or Off  
• Charge the Battery  
• Antenna  
• How to Read This Guide  
• Get Help  
• Green Tips  
This section describes how to start using your device after activating your services, how to contact customer support, and  
how to read this guide.  
Insert or Remove the Battery  
Insert the Battery  
1. To remove the back cover, with the back of the device facing you, press the release button,  
and lift the back cover off the device.  
2. Slide the battery into the slot by aligning the contacts and press until you hear the “click”.  
3. Align the cover tabs with the slots on the back of the device and push down the tabs until  
the cover is securely in place.  
Remove the Battery  
Always switch the device off and disconnect the charger before removing the battery.  
1. To remove the back cover, with the back of the device facing you, press the release button,  
and lift the back cover off the device.  
2. Insert your finger into the finger grip, and lift the battery from its compartment.  
3. To replace the back cover, align the cover tabs with the slots on the back of the device and  
push down the tabs until the cover is securely in place.  
Get Started  
6
   
m i c r o S D C a r d  
microSD Card  
Use only compatible microSD cards approved by Nokia for use with this device. Your device supports microSD cards of up  
to 16 GB (sold separately).  
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the  
card in the middle of an operation may damage the memory card as well as the device, and data stored on the  
card may be corrupted.  
Insert the microSD Card  
1. Lift open the microSD Card slot.  
2. Insert the microSD card with the contacts facing up. Press the microSD card until it clicks  
into place and then close the Card slot.  
Remove the microSD Card  
1. Open the microSD Card slot, and use your thumb to press and release the microSD Card.  
2. Remove the microSD Card.  
3. Close the microSD Card slot.  
Switch Your Device On or Off  
To power your phone on or off, swivel open the phone, and then press and hold the End/Power Key  
powers on or off.  
until the display  
Charge the Battery  
1. Connect the Wall Charger to an AC outlet.  
2. Open the Accessory Port and connect the Wall Charger.  
3. Disconnect the Wall Charger from the phone and AC outlet when the battery indicator bar  
stops scrolling. When the phone is fully charged, it displays a message to ask you unplug the  
charger.  
Get Started  
7
     
A n t e n n a  
Antenna  
Your device may have internal and external antennas. As with any radio transmitting  
device, avoid touching the antenna area unnecessarily while the antenna is transmitting  
or receiving. Contact with such an antenna affects the communication quality and may  
cause the device to operate at a higher power than otherwise needed and may reduce  
the battery life.  
How to Read This Guide  
This guide uses certain terms for the steps that you are asked to perform.  
• Press refers to pressing and releasing a key quickly.  
• Press and hold refers to pressing and holding a key for 2–3 seconds before releasing it.  
• Scroll refers to using the Directional Key to scroll to a menu item.  
• Generally, to perform the step-by-step instructions, you must first swivel open the phone to reveal the full QWERTY  
keypad. The instructions start from Idle Mode except when specifically indicated. To go back to Idle Mode from your  
current working screen, press the End/Power Key.  
• To return to the previous screen, press the Clear Key  
• From Idle Mode, to select Message or Contacts, press the Left Soft Key or the Right Soft Key. To access the main menu,  
press the Key (MENU), and scroll to the desired menu.  
• When a menu is highlighted, to access a submenu, press the number of the submenu, or scroll to the desired item, and  
press the Key.  
.
• To provide a visual representation of your current position in the menu structure, a scroll bar may be displayed on the  
right side of the screen.  
• This guide gives navigation instructions according to the defaults. Main Menu Settings is set to Grid. Display Themes is  
set to White, and Habitat Mode is set to Super World. If other settings or themes are set, navigating the phone’s menus  
may be different.  
Get Help  
Nokia Support and Contact Information  
and services related to your Nokia product.  
On the website, you can get information of Nokia products and services. If you need to contact customer service, check  
Billing and Customer Service  
To reach Verizon Wireless’ billing and customer service support, dial 1-800-256-4646.  
Green Tips  
Here are tips on how you can join in protecting the environment.  
Save Energy  
When you have fully charged the battery and disconnected the Wall Charger from the device, remember to unplug the  
charger from the AC outlet, too.  
You don’t need to charge your battery so often if you:  
• Turn off applications and services such as wireless LAN, Bluetooth, GPS or email when you are not using them  
• Decrease the brightness of the screen of your device  
• Turn off or disable sounds you don’t need, such as keypad tones. Adjust the volume of your device to an "average" level.  
Get Started  
8
             
G r e e n T i p s  
Recycle  
Did you remember to recycle your old device? 65-80% of the materials in a Nokia mobile phone can be recycled. Always  
return your used electronic products, batteries, and packaging materials to a dedicated collection point. This way you help  
prevent uncontrolled waste disposal and promote the recycling of materials. Check how to recycle your Nokia products at  
You may recycle the packaging at your local recycling center.  
Learn More  
Get Started  
9
K e y s a n d P a r t s  
Section 2: Your Device  
Topics Covered  
• Keys and Parts  
• Display Screen  
• Airplane Mode  
• Find Your Phone Number  
This section describes basic mechanical components of your device, elements on the display screen, how to activate  
Airplane Mode, and how to find your phone number.  
Keys and Parts  
Open View  
1. Earpiece  
2. Display Screen  
3. Directional Key  
4. Right Soft Key  
5. OK Key  
6. Voice Commands Key  
7. Speakerphone Key  
8. Camera/Video Key  
9. End/Power Key  
10. Backspace Key  
11. Enter Key  
12. Symbols/Vibration Key  
13. Next Key  
14. Space Key  
15. Shift Key  
16. Function Key  
17. Alphanumeric Keypad  
18. Send Key  
19. TXT Composer Key  
20. Music Key  
21. Browser Key  
22. Clear Key  
23. Left Soft Key  
24. Proximity Sensor  
Your Device  
10  
   
D i s p l a y S c r e e n  
Closed View  
1. Volume Keys  
2. Accessory Port  
3. Speaker  
4. Wrist Strap eyelet  
5. microSD Card slot  
6. 2.5mm Headset Jack  
7. Camera lens  
8. Camera flash  
9. Microphone  
Display Screen  
Idle Mode  
The start screen indicates that your device is in Idle Mode.  
1. Signal strength — The strength of the signal received by the device is indicated by the  
number of bars displayed.  
2. Message — Press the Left Soft Key to select this option.  
3. MENU — Press the  
Key to select this option.  
4. Contacts — Press the Right Soft Key to select this option.  
5. Battery strength — Four bars indicate a fully charged battery.  
6. Location — Location information sharing mode.  
Indicators and Icons  
Depending on your device settings and modes, some or all of the following indicators and icons may appear in Idle Mode.  
Signal strength indicator. You are in a digital network.  
Signal strength indicator. You are in a 3G-only network.  
Signal strength indicator. You are in a 1X network.  
Signal strength indicator. You are in a 3G/1X network.  
Signal strength indicator. You are in a 3G/D-only network.  
Airplane Mode is activated.  
You are roaming outside your home network.  
SSL security is activated.  
Voice privacy is activated.  
Data Call: wireless data communication is in progress.  
Dormant Mode: the device is in a dormant state during a data call. Your connection is still active.  
No service.  
TTY is enabled.  
Your Device  
11  
   
D i s p l a y S c r e e n  
Voice call: a call is in progress.  
Location information sharing is set to E911 Only.  
Location information sharing is set to Location On.  
Bluetooth wireless connectivity is activated.  
Bluetooth connection is active.  
There is a Bluetooth connection.  
Battery level indicator.  
All sounds are off.  
All sounds except the alarm are off.  
Vibration Mode is activated.  
Speakerphone is activated.  
You have missed calls.  
There are new messages in your Inbox.  
A calendar appointment is set.  
There is at least one new voicemail.  
Alarm clock is on.  
Dialed call.  
Received call.  
Missed call.  
The primary mobile phone number of the contact.  
The secondary mobile phone number of the contact.  
The home phone number of the contact.  
The business phone number of the contact.  
The primary email address of the contact.  
The secondary email address of the contact.  
A caller group of the contact.  
A picture ID of the contact.  
A distinctive ringtone for the caller.  
The fax number of the contact.  
Set speed dial for a contact.  
There are unread messages in your Inbox.  
There are read messages in your Inbox.  
There are unread picture messages in your Inbox.  
There are read picture messages in your Inbox.  
Sent message.  
Message is delivered successfully.  
Message is delivered incompletely.  
Sent message failed.  
Messages are delivered successfully.  
Sent messages failed.  
Sent messages.  
Messages are delivered incompletely.  
Message is locked.  
Your Device  
12  
A i r p l a n e M o d e  
Draft text message.  
Draft picture message.  
Priority level of messages.  
Airplane Mode  
Use Airplane Mode in radio sensitive environments - on board an aircraft or in hospitals. When Airplane Mode is active,  
Emergency Call in Airplane Mode  
Enter the emergency number, and press the Send Key. Your device deactivates Airplane Mode and attempts to make an  
emergency call. Airplane Mode is not re-activated automatically after the call.  
Find Your Phone Number  
To view the ten-digit number assigned to your device:  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Info, and then press My Number. The Mobile Device Number and Mobile Identification Number are  
displayed.  
Your Device  
13  
   
M a k e a C a l l  
Section 3: Call Functions  
Topics Covered  
• Make a Call  
• Answer or Reject a Call  
• Options During a Call  
• Speakerphone  
• Recent Calls  
This section describes how to make, answer, and reject a call. It also describes how to use speakerphone and view call logs.  
Make a Call  
Use the Keypad  
Enter the phone number (including the area code if necessary) and letters (if any), and press the Send Key.  
Note: To enter a letter, press and hold the Function Key  
and then press the corresponding key.  
Use the Contact List  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Right Soft Key (Contacts).  
3. Scroll to the desired contact, and press the  
Key (VIEW) to display the details of the contact.  
4. If the entry contains more than one number, scroll to the desired number.  
5. Press the Send Key to call the number.  
Use Speed Dial  
Press and hold the corresponding speed dial key for three seconds.  
To dial a multi-digit speed dialing number (10-999), press the first number(s), and then press and hold the last number.  
All Calls Log  
Swivel open the phone, press the Send Key and scroll to a contact.  
• To dial the contact, press the Send Key.  
• To view call details, press the  
Key (OPEN).  
• To create a new message, press the Left Soft Key (Message).  
• To select from the available options, press the Right Soft Key (Options).  
Answer or Reject a Call  
To answer a call, swivel open the phone or press the Send Key. To change settings for answering a call, see "Answer  
To silence an incoming call, press the Left Soft Key (Quiet). To forward the call to your voicemail, press the Right Soft Key  
(Ignore).  
Options During a Call  
When you are on a call, press the Right Soft Key (Options) and select from the following:  
New Message — Send messages.  
Contact List — Search your Contact List.  
Recent Calls — Check recent calls.  
Bluetooth Menu — With a Bluetooth headset connected, select Audio to Phone to hear the other party on the device, or  
Audio to Device to hear the other party on the Bluetooth headset.  
Main Menu — Use Main Menu.  
Call Functions  
14  
             
S p e a k e r p h o n e  
Notepad — Open the Notepad.  
Voice Record — Record a phone call.  
Voice Privacy — Select whether to protect the privacy of the conversation.  
Speakerphone  
To use the speakerphone, swivel open the phone and press the Speakerphone Key . SPEAKERPHONE SET will appear on  
the main screen.  
To deactivate the speakerphone, press the Speakerphone Key again. SPEAKERPHONE CANCELED will appear on the  
main screen.  
Warning: Do not hold the device near your ear when the speaker is in use, because the volume may be extremely loud.  
Recent Calls  
Information on missed, received, or dialed calls is stored in the Recent Calls menu. When the number of calls exceeds the  
limit of call category folders, the oldest call is replaced.  
View Call Log  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Scroll to the call category folder (Missed, Received, Dialed, Blocked, or All), and press the  
The Blocked folder is only available when Block All or Contacts Only is set to incoming calls. See "Security," p. 45.  
Key (MENU), and press Recent Calls.  
Key to view the call log.  
4. In each call category folder, scroll to the desired call record, press the  
Key (OPEN) to view details, press the Left Soft  
Key (Message) to create a new message, or press the Right Soft Key (Options) and select from the available options to  
perform the corresponding operations.  
Call Timers  
Call timers record the time of incoming and outgoing calls as well as the volume of data transferred and received.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Recent Calls.  
3. Press View Timers.  
• To return to the previous screen, press the Clear Key  
.
• To reset a timer, scroll to the desired timer, and press the Left Soft Key (Reset).  
• To reset all timers, press the Right Soft Key (Reset All).  
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,  
rounding off for billing, taxes, and so forth.  
Note: Some timers, including the life timer, may be reset during service or software upgrades.  
Call Functions  
15  
       
E n t r y M o d e s  
Section 4: Text Entry  
Topics Covered  
• Entry Modes  
• Abc and ABC Modes  
• Word Mode  
• Number Entry  
• Symbol Entry  
• Quick Text  
This section describes how to select the desired entry modes and how to use predictive text entry mode.  
Entry Modes  
There are five text entry modes: Word, Abc, ABC,123, and Symbols. The following rules apply:  
• To delete a character, press the Backspace Key ; to delete a word, press and hold the Backspace Key  
.
• To enter a space, or to accept a completed word in Word Mode, press the Space Key  
• To toggle between lower case, sentence case, and upper case in Word, Abc, or ABC Mode, press the Shift Key . To  
toggle between Word, Abc, and 123 Modes, press and hold the Shift Key  
.
.
• To enable number and symbol entry in Word, Abc, or ABC Mode, press and hold the Function Key  
corresponding key on the keypad.  
and press the  
• To change the mode, press the Left Soft Key.  
Abc and ABC Modes  
In Abc and ABC Modes, to enter a letter, press the corresponding key.  
Word Mode  
Word Mode is a predictive text entry method that is based on a built-in dictionary to quickly recognize the most  
commonly used words for a specific key sequence.  
1. To activate Word Mode, press the Left Soft Key, scroll to Word, and press the  
Key.  
2. Enter the first few letters of your word with the keypad.  
3. To display proposed matches, press the Next Key until the appropriate word is displayed.  
4. When the desired word is displayed, press the Space Key to confirm and insert a space.  
5. If the desired word is not found in the dictionary, delete your entry, and  
re-enter the word. Press the Space Key to confirm and save the new word to the dictionary.  
Number Entry  
• To enter a number in Abc, ABC, or Word Mode, press and hold the desired number key.  
• To enable number entry in Abc, ABC, or Word Mode, press and hold the Function Key  
key.  
, and press the corresponding  
Symbol Entry  
• To enter a symbol, press the Symbols Key  
, scroll to the desired symbol, and press the  
Key.  
• To enable symbol entry in Abc, ABC, or Word Mode, press and hold the Function Key  
key.  
, and press the corresponding  
Quick Text  
Quick text are short, prewritten messages that can be inserted into a message.  
To insert quick text into your message, press the Right Soft Key (Options), scroll to Insert Quick Text, and press the  
Select the desired text from the list, and press the Key.  
Key.  
Text Entry  
16  
               
M e d i a C e n t e r  
Section 5: Media Center  
Topics Covered  
• Media Center  
• Music & Tones  
• Picture & Video  
• Games  
• Mobile Web  
• Browse & Download  
• Extras  
• Info  
• Calls while Downloading an Application  
• Security and Functionality  
This section describes how to download ringtones, sounds, pictures, games, and extras. It also describes how to take,  
record and store pictures, sounds, and ringtones with your device.  
Media Center  
Download charges for Media Center applications vary and airtime charges apply when browsing, downloading, and using  
certain applications. Media Center can be used anywhere on the Verizon Wireless network, as long as your device has a  
digital signal available.  
This feature shares memory space with other features. You can also view memory information to see how much memory is  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
Music & Tones  
You can personalize your device with sounds and ringtones using Music & Tones (network service).  
V CAST Music with Rhapsody®  
V CAST Music with Rhapsody is a digital music service that lets you listen to millions of songs from thousands of artists.  
Discover new and old favorites in an extensive music catalog. Download V CAST Music with Rhapsody to sync tracks,  
albums, and playlists to your new compatible phone, while managing your existing PC music library all in one place.  
Purchase Songs on Your V Cast Music with Rhapsody Capable Device*  
When you purchase music from your wireless device, you also get a second copy that can be downloaded to your PC from  
the V CAST Music with Rhapsody software.  
*Per-song charges apply.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Music & Tones, and then press V CAST Music | Rhapsody.  
Background Music  
Play Music in the Background  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. From Idle Mode, press the Music Key to open My Music.  
3. Select a playlist or songs to play.  
4. To play music in the background, press the End/Power Key.  
To exit the background music, from Idle Mode, press and hold the End/Power Key. A message Stop playing music? displays  
on-screen. Press the  
Key to select Yes.  
Media Center  
17  
             
M u s i c & T o n e s  
When the device is in Idle Mode and the background music is playing, you can perform following actions:  
• To launch the Music Player in foreground, press the Music Key  
• To pause or resume music, press and hold the Function Key  
.
and then press the Music Key  
.
When an application is running and the background music is playing, you can perform following actions:  
• To skip to the next song, press the Music Key  
• To pause or resume music, press and hold the Function Key  
.
and then press the Music Key  
.
Note: Not all applications support the playing of background music.  
Get New Ringtones  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Music & Tones, and then press Get New Ringtones.  
4. Press Get New Applications to download new ringtone applications, or use one of the applications to download  
ringtones.  
My Ringtones  
My Music  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Music & Tones, and then press My Music.  
Tip: From Idle Mode, when music is not playing, to quickly access My Music, press Key.  
Play Songs with Your Wireless Device Open  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Music Key to open My Music.  
3. Select Songs and press the  
Key, highlight your song selection, and press the  
Key (Play) to play your selection.  
Play Songs with Your Wireless Device Closed  
You can also start the music player while the handset is closed.  
1. With the handset closed, press the  
2. Press the Key (MENU) to open the Main Menu. Then, select Media Center and press the  
3. Select Music & Tones and press the  
Key to unlock the keys.  
Key.  
Key.  
4. Select My Music and press the  
Key.  
5. Select Songs and press the  
Key. Highlight your song selection, and press the  
Key (Play) to play your selection.  
Create Playlists on Your Wireless Device  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Music Key to open My Music.  
3. Select Playlists and press the  
Key.  
4. Enter a title for the playlist in the text box and press the  
Key.  
5. Highlight the song you want to add and press the  
songs you want in your playlist.  
Key (Mark). Repeat this step until you have marked all of the  
6. Press the Right Soft Key (Done).  
Edit Playlists on Your Wireless Device  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Music Key to open My Music.  
3. Select Playlists and press the  
Key.  
4. Highlight the playlist you want to edit and press the Right Soft Key (Options). Select Edit Playlist and press the  
Key.  
Media Center  
18  
P i c t u r e & V i d e o  
5. Press the Right Soft Key (Add) to add a song to the playlist. To move or delete a song in the playlist, press the  
Directional Key up and down to highlight the song you want to move or delete, then press the  
the song or press the Left Soft Key (Remove) to delete the song from the playlist.  
Key (Move) to move  
Delete Songs from Your Wireless Device  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Music Key to open My Music.  
3. Select Songs and press the  
4. Highlight the song you want to delete and press the Right Soft Key (Options). Select Erase song and press the  
With Yes highlighted, press the Key.  
Key.  
Key.  
Note: If you erase music you’ve previously purchased, you can simply re-sync with your PC to add the song back to your  
wireless device’s music library.  
V CAST wireless device and additional charges required for V CAST service. 3-D for additional download fee. V CAST  
music not available on all V CAST wireless devices. Per-song charges apply for music downloads. Always download  
legally. All brand and product names not owned by Verizon Wireless are the property of their respective owners. If  
you have any questions about using V CAST Music service on your specific wireless device, visit  
verizonwireless.com/data.  
My Sounds  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Music & Tones, and then press My Sounds.  
• To record sound clips, press Record New, and then press the  
Key to start recording. To finish recording, press  
the  
Key (STOP). The recording is saved to My Sounds.  
• To play a sound clip, scroll to a sound clip, and press the  
• To set a self-recorded sound clip as a ringtone, contact ID, or alert sound, scroll to the sound clip, and press the Left  
Soft Key (Set As). Select the desired option and press the Key to set.  
Key (PLAY).  
To access other options of a sound clip, scroll to a sound clip, press the Right Soft Key (Options), and select from the  
following:  
Send — Send the highlighted sound in a picture message.  
To Online Album — Upload the highlighted sound to an online album.  
Rename — Rename the highlighted sound, enter a new name, and select the  
sounds).  
Key to save (only for self-recorded  
Move — Move a sound to the inserted memory card (only for self-recorded sounds).  
Lock — Protect a sound from being erased (only for self-recorded sounds).  
Erase — Erase a sound clip stored in the device (only for self-recorded sounds).  
Erase All — Erase all sound clips stored in the device (only for self-recorded sounds).  
File Info — View file information about the highlighted sound.  
Sync Music  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Music & Tones, and then press Sync Music.  
Note: A compatible USB cable (sold separately) is required for syncing.  
Picture & Video  
The built-in camera allows you to take digital pictures and record videos. You can also receive and send pictures and  
videos from your device (network service).  
After you take a picture, you can attach it to a picture message, or set it as wallpaper or picture ID for a contact. When you  
attach a picture to an entry in your list of contacts, the picture is displayed when the contact calls you or when you call  
Media Center  
19  
   
P i c t u r e & V i d e o  
the contact. Pictures can be stored in the My Pictures folder or can be uploaded to an online album. See "Picture, Video or  
After you record a video clip, you can attach it to a video message, or set it as wallpaper or ringtone. Video clips can be  
stored in the Videos folder or can be uploaded to an online album. See "Picture, Video or Voice Messages," p. 26.  
Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash  
while taking a picture.  
V CAST Videos  
V CAST Video brings news and entertainment on your wireless device with streaming video clips. Visit  
verizonwireless.com/vcast to view all of the applications available for your wireless device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press V CAST Videos.  
Get New Pictures  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press Get New Pictures.  
4. Press the  
Key to select Get New Applications, or use one of the applications to download pictures.  
My Pictures  
You can set a self-taken picture as the wallpaper, or contact ID for a particular contact.  
View and Edit a Picture  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Picture & Video, and then press My Pictures.  
4. Scroll to a picture, and press the Key (VIEW).  
Key (MENU), and press Media Center.  
5. To edit the picture, press the Right Soft Key (Options), and press Edit. If the resolution is larger than 640*480, the  
picture is saved as a copy at a lower resolution.  
Delete a Picture  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press My Pictures.  
4. Scroll to a picture, and press the Left Soft Key (Erase).  
You cannot delete preloaded pictures.  
Other Options  
Scroll to a picture, press the Right Soft Key (Options), and select from the following:  
Send — Send the picture in a picture message, send to an online album or a blog, or using Bluetooth connectivity.  
Set As — Set a picture as your wallpaper or picture ID for a contact.  
Take Picture — Take a picture with the built-in camera, see "Take Pictures," p. 21.  
Get New Pictures — Get new pictures or use one of the applications to download pictures, see "Get New Pictures," p. 20.  
Manage My Pics — View, move, lock, and use pictures (only for self-taken pictures).  
My Slide Shows — Add or view a slide show of your pictures. Only pictures in the JPEG format can be added to a slide show.  
Rename — Rename a picture (only for self-taken pictures).  
Move — Move a picture to the inserted memory card (sold separately) (Only for self-taken pictures).  
Lock — Protect a picture from being erased (only for self-taken pictures).  
Erase All — Delete all pictures stored in the device or the card (only for self-taken pictures).  
File Info — View file information of the highlighted picture.  
Print Via Bluetooth — Send a picture to a Bluetooth enabled printer using Bluetooth connectivity (only for self-taken  
pictures).  
Media Center  
20  
   
P i c t u r e & V i d e o  
My Videos  
Play a Video Clip  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press My Videos.  
4. Scroll to a video clip, and press the  
Key (PLAY).  
Delete a Video Clip  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press My Videos.  
4. Scroll to a video clip, and press the Left Soft Key (Erase).  
Other Options  
Scroll to a video clip, press the Right Soft Key (Options), and select from the following:  
Send — Send the video clip in a video message, send to an online album or a blog, or using Bluetooth connectivity.  
Record Video — Record a video clip with the built-in camcorder, see "Record Video," p. 21.  
Set As Wallpaper — Set a video clip as your wallpaper.  
Manage My Videos — Play, move, lock, and erase video clips.  
Rename — Rename a video clip.  
Move — Move a video clip to the inserted memory card (sold separately).  
Lock or Unlock — Protect or unprotect a video clip from being erased.  
Erase All — Delete all video clips stored in the device or the card.  
File Info — View file information of the highlighted video clip.  
Take Pictures  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To activate the camera, press the Camera/Video Key  
3. To take a picture and save it to My Pictures, press the  
.
Key (TAKE), and then press the Left Soft Key (Save).  
To adjust the picture quality for pictures being taken, press the Camera Key , press the Right Soft Key (Options), and  
select from the following:  
Resolution — Select 2048 x 1536, 1280 x 960, 800 x 600, 640 x 480, or 320 x 240.  
Self Timer — Select Off, 3 seconds, 5 seconds, or 10 seconds.  
Flash — Select Off, On, or Only This Shot.  
Brightness — Press the Directional Key left or right.  
White Balance — Press the Directional Key left or right to select Auto, Sunny, Cloudy, Tungsten, or Fluorescent.  
Shutter Sound — Select Shutter, Silent, Say "Cheez", or Ready! 1 2 3.  
Color Effects — Press the Directional Key left or right to select Normal, Antique, Black & White, or Negative.  
Capture Mode — Select Landscape or Portrait.  
Auto Focus — Select Off or On.  
Record Video  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To activate the camcorder, press and hold the Camera/Video Key  
.
3. To record a video clip and save it to My Videos, press the  
Key (REC), press the  
Key (STOP), and then press the Left  
Soft key (Save).  
• To preview video clips saved in your device, press the Left Soft key (Videos).  
• To define specific video recorder settings, press the Right Soft key (Options) and select from the available options.  
Recording Light — Select Off, On, or Only This Shot.  
Media Center  
21  
     
G a m e s  
Brightness — Press the Directional Key left or right.  
White Balance — Press the Directional Key left or right to select Auto, Sunny, Cloudy, Tungsten, or Fluorescent.  
Shutter Sound — Set shutter sound on or off.  
Recording Length — Select Video Message or Maximum.  
Online Album  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To access Online Album and upload pictures, press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press Online Album. Follow the on-screen prompts.  
My Slide Shows  
Add a New Slide Show  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To access Online Album and upload pictures, press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press My Slide Shows.  
4. To add a new slide show, press the Left Soft Key (New).  
5. A message prompts that only some picture formats can be displayed in a slide show. Select Remind Me Later or Don't  
show again and press the  
Key.  
6. Select a picture, press the  
Key (MARK).  
7. Repeat step 6 until all the desired pictures are marked, and then press the Left Soft Key (Done).  
8. Enter the name of the slide show and press the  
Key (SAVE). A confirmation message appears.  
Play a Slide Show  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To access Online Album and upload pictures, press the  
3. Press Picture & Video, and then press My Slide Shows.  
Key (MENU), and press Media Center.  
4. To play a slide show, press the Directional Key up or down to select the desired slide show, and then press the  
Key  
(PLAY).  
Other Options  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To access Online Album and upload pictures, press the  
Key (MENU), and press Media Center.  
3. Press Picture & Video, and then press My Slide Shows.  
4. Scroll to a slide show, press the Right Soft Key (Options), and select from the following:  
Erase — Delete the slide show selected.  
Rename — Rename the slide show selected.  
Erase All — Delete all slide shows stored in the device.  
Transition Effect — Set transition effect between pictures in the slide show. Choose from the following and then press  
the  
Key: Off, Random, Standard Fade, Growing Star, Clock Fade, Green First, Horizontal Wipe, Rotation Flip, Zoom  
Out, Radial Fade, Push Right, Box Up, Rotating Edge, Merge Split, Dissolve, Dual Blinds, Comb Vertical, Moving Lens, Line  
Fill Fade, Rainfall, or Spray Fade.  
Games  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To open games or download a new game (network service), press the  
3. Press Games, and press Get New Applications.  
Key (MENU), and press Media Center.  
4. Select the game you want and a payment option, and download the title. You can start using the application as soon as  
the download is complete.  
Media Center  
22  
   
M o b i l e W e b  
Mobile Web  
To connect to the internet and browse, for example, for the latest news, stock quotes, and movie listings (network service).  
This feature is currently only available within certain areas. For more information, contact Verizon Wireless.  
Launch Verizon Wireless Mobile Web  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Mobile Web.  
Tip: From Idle Mode, to quickly access Mobile Web, press the Browser Key  
.
Browse & Download  
Get New Applications  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, and press Get New Applications.  
Backup Assistant  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select Backup Assistant, and press the  
Key.  
4. Follow the on-screen prompts.  
City ID  
If you have subscribed to the service of City ID, your phone displays the city and state where an incoming phone number is  
registered. To check availability and to subscribe to City ID service, contact Verizon Wireless.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select City ID, and press the  
Key.  
4. Follow the voice instruction.  
Corporate Email  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select Corporate Email, and press the  
Key.  
4. Follow the voice instruction.  
Mobile Email  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select Mobile Email, and press the  
Key.  
4. Follow the voice instruction.  
Visual Voice Mail  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select Visual Voice Mail, and press the  
4. Follow the voice instruction.  
Key.  
VZ Navigator  
VZ Navigator supports the GPS-related service, helping you find your way. With VZ Navigator, you can get your current  
location, or get directions from the current location to a selected address.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
Media Center  
23  
       
E x t r a s  
2. Press the  
Key (MENU), and press Media Center.  
3. Press Browse & Download, select VZ Navigator, and press the  
Key.  
Extras  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Media Center.  
3. Press Extras, and press Get New Applications.  
Info  
You can check the memory status or find information on how to add, delete, disable, or restore applications, determine  
airtime charges, or cancel subscriptions.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Media Center.  
3. Press the Right Soft Key (Info), select App. Memory, Content Memory, View Log, or Help, and press the  
Key.  
Calls while Downloading an Application  
While downloading an application, calls are automatically sent to your voicemail, if available.  
When using an application, an incoming call automatically interrupts the application and allows you to answer the call.  
When you complete your call, you can resume the application.  
Make an emergency call while online  
You can end your data connection to make an emergency call.  
1. With the phone swiveled open, close your connection by pressing the End/Power Key as many times as needed to clear  
the display and get the device ready for calls.  
2. Dial 911 for emergency calls.  
3. Press the Send Key.  
Security and Functionality  
Your device supports a digital rights management system to protect acquired content. Content such as ringtones may be  
protected and associated with certain usage rules.  
Usage rules are defined in the content activation key that can be delivered with the content or delivered separately. You  
may be able to update the activation key. Always check the delivery terms of any content and activation key before  
acquiring them, as they may be subject to a fee.  
Mobile Web is a digital network service that is not available everywhere. Mobile Web text messages and alerts fees apply  
to sent and received messages. Airtime charges apply. See "Network Services," p. 5.  
The security icon  
does not indicate that the data transmission between the gateway and the content server (or place  
where the requested resource is stored) is secure. Verizon Wireless secures the data transmission between the gateway  
and the content server.  
Important: Use only services that you trust and that offer adequate security and protection against harmful software.  
Media Center  
24  
               
T e x t M e s s a g e s  
Section 6: Messaging  
Topics Covered  
• Text Messages  
• Picture, Video or Voice Messages  
• Message Folders  
• Voicemail  
• Visual Voice Mail  
• Mobile Instant Messaging  
• Email Messages  
• Chat  
• Blogs  
• Message Settings  
This section describes how to send different types of messages. It also describes other messaging features.  
Text Messages  
If you have subscribed to a message network service, you can send and receive messages between compatible devices that  
also subscribe to a message service.  
When composing text messages (SMS) or enhanced messages (EMS, messages that can contain simple pictures, sounds,  
animations, or melodies), the number of characters used (out of a maximum per message) appears in the top left corner of  
the message screen. Segments are created when the message length exceeds the maximum allowed number of  
characters.  
The number of segments used (out of a maximum of 7) appears in the top right corner of the message screen. No  
additional text can be entered when all segments and characters have been used. Segments are delivered as individual  
messages.  
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are  
sent as a series of two or more messages. Verizon Wireless may charge accordingly.  
Write and Send a Text Message  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Messaging.  
3. To write a new text message, press New Message, and then press TXT Message.  
4. In the To: field, enter the number, or press the Right Soft Key (Add), select From Contacts, and then select a recipient  
from the Contact List.  
5. To move to the Text: field, press the  
Key or press the Directional Key down. Compose a message using the keypad.  
6. To send the message, press the  
Key (SEND).  
Tip: From Idle Mode, to quickly create a new text message, press the TXT Composer Key  
.
TXT message options  
To customize a new text message, press the Right Soft Key (Options) when the cursor is in the Text: field, and select from  
the following:  
Insert Quick Text — Insert text from the Insert Quick Text gallery into your document. See the Quick Text option under  
Save As Draft — Save your message in the Drafts folder.  
Add — Include a graphic, sound clip, name card, signature (if preset to add for a specific message), or add contact  
information in your message.  
Priority Level — Set the priority level. Select High, or Normal. If set to high, "URGENT" appears at the top of receiver’s  
message.  
Messaging  
25  
       
P i c t u r e , V i d e o o r V o i c e M e s s a g e s  
Cancel Message — Close the message without sending it. To save it in the Drafts folder, select Yes. To delete the message  
and exit, select No.  
Picture, Video or Voice Messages  
Picture messages are multimedia messages that can contain text, pictures, slides, and sound clips. Video messages are  
multimedia messages that can contain text, video clips, and name cards. Voice messages are messages that can contain  
text and sound clips. Depending on your network services, you may receive a message that includes an internet address  
where you can view the picture messages.  
Pictures are scaled to fit the display. Your device has a picture message viewer for playing messages. Incoming messages  
remain in the Inbox folder until you delete them (when Auto Erase Inbox is deactivated, see "Message Settings," p. 28).  
When you save the picture message, you can use the image as wallpaper or use the sound as a ringtone, unless the  
content is protected by copyright.  
For availability and subscription to the picture, video, or voice messaging service, contact Verizon Wireless.  
Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a  
message may vary depending on the receiving device.  
Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful  
to your device.  
Write and Send a Picture, Video, or Voice Message  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Messaging.  
3. To write a new picture, video, or voice message, press New Message, and then press Picture Message, Video  
Message or Voice Message.  
4. In the To: field, enter the number, or press the Right Soft Key (Add), select From Contacts, and then select a recipient  
from the Contact List.  
5. To move to the Text: field, press the  
6. Add multimedia contents.  
• Picture message  
Key or press the Directional Key down. Compose a message using the keypad.  
1. To add a picture, scroll down to the Picture: field. Press the Left Soft Key (My Pics), scroll to the desired picture,  
and press the Key. To add a new picture using the camera, press the Left Soft Key (My Pics), press the Right  
Soft Key (Options), press Take Picture, press the Key (TAKE), and press the Left Soft Key (Save). Press the  
Left Soft Key (My Pics), select the picture just taken, and press the Key.  
2. To add a sound clip, scroll down to the Sound: field. Press the Left Soft Key (Sounds), scroll to the desired sound  
clip, and press the  
the  
return to the message, press the  
Key. To record a new sound clip, press the Left Soft Key (Sounds), press Record New, press  
Key to begin recording, and press the  
Key.  
Key (STOP) to stop recording. To select the new recording and  
• Video message  
To add a video clip, scroll down to the Video: field. Press the Left Soft Key (My Videos), scroll to the desired video clip,  
and press the  
Key.  
• Voice message  
To add a new sound clip to a voice message, press the  
Key to begin recording, and press the  
Key (STOP) to end  
recording. The recorded sound clip is attached in the Voice: field.  
7. To add a name card in a picture message or voice message, scroll down to the Name Card field, press the Left Soft Key  
(Contacts), and then press Contacts. Select the desired contacts by pressing the  
adding contacts, press the Left Soft Key (Done).  
Key (MARK). When finished  
8. To add a message title, scroll down to the Subject: field. Enter text (up to 80 characters) using the keypad.  
9. To send the message, press the Key (SEND).  
Picture, Video and Voice Message Options  
To customize a new picture, video or voice message, press the Right Soft Key (Options) when the cursor is in the Text:,  
Picture:, Sound:, Name Card, Voice:, or Subject: fields, and you may select from the following:  
Preview — View your message.  
Messaging  
26  
     
M e s s a g e F o l d e r s  
Review — View your voice message.  
Save As Draft — Save your message to the Drafts folder.  
Add Quick Text — Insert text from the Add Quick Text gallery into your message (in Text: or Subject: field only).  
Add Contact Info — Insert contact information to your message.  
Add Slide — Add a slide to the message.  
Priority Level — Set the priority level to High or Normal.  
Remove Picture — Remove a picture from the message (if previously added, and when the cursor is in this field).  
Remove Sound — Remove a sound file from the message (if previously added, and when the cursor is in this field).  
Remove Name Card — Remove a name card from the message (if previously added, and when the cursor is in this field).  
Remove Recording — Remove a recording from the message (if previously added, and when the cursor is in this field).  
Remove Slide — Remove slide file from the message (if previously added).  
Cancel Message — Close the message without sending it. To save it in the Drafts folder, select Yes. To delete the message  
and exit, select No.  
Message Folders  
The device saves sent and received messages in the Messages folder. The Drafts folder is used to store drafts of messages.  
To open the Messages, or Drafts folder, with the device swiveled open, press the Left Soft Key (Message), and then press  
Messages, or Drafts. The message list is displayed. Scroll to a message, and select from the available options.  
Note: This feature can be seen when the Messages View setting value is set to By Contact, which is the default setting.  
With Message View By Contact setting, all received and sent messages are stored in each of your contacts name  
folders. If By Time is selected, navigating this menu will be different.  
Voicemail  
Receive a Voicemail Message  
When you receive a new voicemail message, the device displays a voicemail notification.  
1. Scroll to Listen Now or Listen Later.  
2. Press the  
Key.  
Listen to a Voicemail Message  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Voicemail, and press the  
Key (MENU), and press Messaging.  
Key (CALL) to dial your voicemail service and retrieve your message.  
Tip: To quickly dial your voicemail box from Idle Mode, press and hold  
.
Visual Voice Mail  
You can subscribe to visual voice mail for larger storage capacity, longer message length, and caller ID based greetings.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Messaging.  
3. Press Visual Voice Mail to access your visual voice mail account.  
Mobile Instant Messaging  
To download IM applications or use one of the applications preloaded, see "Mobile Instant Messaging," p. 36.  
Email Messages  
To log into your email account and send email messages, see "Email," p. 35.  
Messaging  
27  
           
C h a t  
Chat  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Messaging.  
3. Press Chat, and follow the on-screen prompts.  
Blogs  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Messaging.  
3. Press Blogs to access your personal blogs.  
4. To enter new blog details, press the  
Key (ADD), enter the site name and URL address, and press the  
Key (SAVE).  
Message Settings  
This menu allows you to define settings for messages sent or received on your device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Messaging.  
3. Press the Left Soft Key (Settings).  
4. To define message settings, select from the following:  
Messages View — Select whether to view messages By Time or By Contact.  
Entry Mode — Change the Default Entry mode for writing text to Word, Abc, ABC or 123. The default entry mode is Abc.  
Auto Save Sent — Select whether to automatically save all sent messages to the Sent folder. To be asked every time to  
save a sent message, select Prompt.  
Auto Erase Inbox — Select whether to automatically erase the oldest (unlocked) message from the Inbox folder when  
the device memory is full. If set to Off, you are prompted to delete messages from your Inbox folder when the memory is  
full.  
Messaging Font Size — Select Normal or Large for the character size of messages displayed in the Inbox, Sent and Drafts  
folders, and when composing a text message.  
TXT Auto View — Select whether to display incoming text messages automatically. If set to Off, it will display a prompt  
message to select View Now or View Later when a message is received.  
Pic-Video Auto Receive — Select whether to save incoming picture and video messages automatically. If set to Off, you  
can select Reject to refuse to receive the message.  
Quick Text — View and edit Quick Text entries, which are short, prewritten messages that can be recalled and inserted  
into a message. The gallery of preloaded and user-defined Quick Text entries is displayed. To edit an entry, press the  
Key (EDIT). To add an entry, press the Right Soft Key (Options), and press New. To erase a Quick Text entry, scroll to  
the entry, and press the Left Soft Key (Erase). Select Yes and press the  
Key.  
Voicemail # — Change the default speed dialing number for voicemail. Enter the new number, and press the  
Key.  
Callback # — Change the default callback number. Enter the new number, and press the  
callback number, select Off.  
Key. To deactivate the  
Signature — Create or edit text that is appended to each outgoing message. If you do not want to add a signature,  
select None. Select Custom, enter the signature text, and press the Key.  
Messaging  
28  
               
C r e a t e N e w C o n t a c t s  
Section 7: Contacts  
Topics Covered  
• Create New Contacts  
• Contact List  
• Groups  
• Speed Dials  
• Emergency Contacts  
• My Name Card  
• Light Effects  
This section describes how to manage your contacts by storing their names, numbers, and other information. You can keep  
track of contact information in Contacts. Contact names are saved in the Contact List, and each contact entry can contain  
multiple phone numbers and email addresses. Contact entries can be assigned with speed dials, picture IDs, ringtones, and  
caller groups.  
Create New Contacts  
Create a New Contact  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. To enter the contact information, press New Contact.  
4. Scroll to the desired field, and enter the corresponding information.  
• To add the name of the contact, which is displayed in the Contact List, scroll to the Name: field, enter a name, and  
press the  
Contact List.  
Key (SAVE). If no name is entered, the default phone number or email address is displayed in the  
• To add the primary mobile phone number for the contact, scroll to the Mobile 1: field, and enter a number.  
• To add the home phone number for the contact, scroll to the Home: field, and enter a number.  
• To add the business phone number for the contact, scroll to the Work: field, and enter a number.  
• To add the primary email address for the contact, scroll to the Email 1: field, and enter an email address.  
• To add a contact to a group, scroll to the Group: field, and press the Left Soft Key (Set). Scroll to the desired group,  
and press the  
• To assign a picture ID to the contact, scroll to the Picture: field, and press the Left Soft Key (Set). To use an existing  
image as the picture ID for the contact, scroll to the desired image in the My Pictures folder, and press the Key.  
• To assign a ringtone to the contact, scroll to the Ringtone: field, and press the Left Soft Key (Set). Scroll to the desired  
ringtone, and press the Key.  
Key.  
• To add a secondary mobile phone number for the contact, scroll to the Mobile 2: field, and enter a number.  
• To add an IM screen name for the contact, scroll to the IM Screen Name: field, and press the Left Soft Key (Set).  
Select a service provider, and press the  
Key. Enter the IM Screen Name, and press the  
Key (SAVE).  
• To add a fax number for the contact, scroll to the Fax: field, and enter a fax number.  
• To add a secondary email address for the contact, scroll to the Email 2: field, and enter an email address.  
• To add an address for the contact, scroll to the Street:, City:, State:, Zip Code:, and Country: fields, and enter the  
corresponding information.  
• To select the light color for the contact, scroll to the Light Color : field, and press the Left Soft Key (Set). Select the  
color, and press the  
5. Press the Key (SAVE).  
Key.  
Tip: To quickly create a contact from Idle Mode, swivel open the phone and dial the number, press the Left Soft Key  
(Save), and select Add New Contact. Follow the steps above. If no name is entered, the default phone number or email  
address is displayed in the Contact List.  
Contacts  
29  
       
C o n t a c t L i s t  
Update a Number to a Contact  
You can add new numbers to contacts by entering the number from Idle Mode.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Enter the number, press the Left Soft Key (Save), and select Update Existing.  
3. Select the desired contact from the Contact List, and press the  
Key.  
4. Select the number type, and press the  
Key.  
Add Pauses  
Calls to automated systems often require a password or account number. Instead of manually entering numbers each  
time, store the numbers to your contacts along with special characters called pauses.  
You may add pauses after entering a number from Idle Mode.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Enter the phone number.  
3. To add pauses, press the Right Soft Key (Options), and press Add 2-Sec Pause or Add Wait, then enter additional  
digits.  
4. Press the Left Soft Key (Save), and select Add New Contact or Update Existing by pressing the  
5. Select the desired contact from the Contact List, and press the Key.  
Key.  
6. Select the number type, and press the  
Key.  
Change the Default Number  
The default number is the contact number that is called when you dial by contact name. To change the default number  
when multiple numbers are assigned to a single contact, do the following:  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Right Soft Key (Contacts), then scroll to the contact you wish to modify, and press the Left Soft Key (Edit).  
3. Scroll to the phone number you wish to set as the default number, and press the Right Soft Key (Options).  
4. Press Set As Default, and press the  
Key to select Yes.  
5. Press the  
Key (SAVE) to update the contact entry.  
Contact List  
Find a Contact Entry  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Contacts.  
3. Press Contact List.  
4. In the Go To field, enter the first letters of the name you wish to find, or scroll up or down using the Directional Key to  
select from the proposed matches.  
Edit a Contact Entry  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Contact List.  
4. Scroll to a contact, and press the Left Soft Key (Edit) and make any necessary adjustments. For editing options, see  
5. Press the  
Key (SAVE) to update the contact entry.  
View a Contact Entry  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Contact List.  
4. Scroll to a contact, and press the  
Key (VIEW).  
• Press the Left Soft Key (Erase) to delete the contact.  
• Press the Key (EDIT) to modify the contact information.  
Contacts  
30  
     
G r o u p s  
• Press the Right Soft Key (Options) to view additional options for sending a message, calling the contact, or copying  
the contact information to a microSD card (sold separately).  
Contact List Options  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Contact List.  
4. Scroll to a contact, press the Right Soft Key (Options), and select from the following:  
New Contact — Create a new contact.  
Erase — Delete the contact.  
New TXT Message — Send the contact a text message (network service).  
New Picture Message — Send the contact a picture message (network service).  
New Video Message — Send the contact a video message (network service).  
New Voice Message — Send the contact a voice message (network service).  
Set As ICE Contact or Unassign ICE Contact — Assign or unassign your contact as an In Case of Emergency (ICE) contact.  
Call — Dial the contact (network service).  
Send Name Card — Send a name card to a compatible device using Bluetooth connectivity.  
Erase All Contacts — Delete all contacts.  
Copy — Copy a contact to the inserted memory card (sold separately).  
Copy All — Copy all contacts to the inserted memory card (sold separately).  
Groups  
Groups help organize contact entries into categories, and allow you to search your contacts faster and send a message to  
all contacts in one or more groups.  
Create a New Group  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Groups.  
4. To add a new group, press the Left Soft Key (New), enter a name, and press the  
Key (SAVE).  
Move a Contact Entry to a Group  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Groups.  
4. Scroll to the desired group, press the Right Soft Key (Options), select Add, and press the  
5. Scroll to the desired contact, and then press the Key (MARK).  
Key (MENU), and press Contacts.  
Key.  
6. Repeat the previous step until all the desired contacts are marked, and then press the Left Soft Key (Done).  
A contact can only be associated with one caller group at a time.  
Rename a Group  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Groups.  
4. Scroll to the group you want to rename (except the default groups), and press the Right Soft Key (Options).  
5. Press Rename, edit the caller group name, and press the  
Key (SAVE).  
You cannot rename a default group.  
Erase a Group  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
Contacts  
31  
         
S p e e d D i a l s  
3. Press Groups.  
4. Scroll to the group you want to erase (except the default groups), and press the Right Soft Key (Options).  
5. Press Erase Group, and press the  
Key to select Yes.  
Send a Group Message  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Contacts.  
3. Press Groups.  
4. Scroll to the desired group, press the Right Soft Key (Options), and press New TXT Message, New Picture Message,  
New Video message, or New Voice Message.  
5. Create a message, and press the  
Key (SEND).  
Speed Dials  
You can associate any mobile, home, or work phone number in the Contact List with a speed dial location from 2 to 999  
(network service).  
• Voicemail is assigned to speed dial location 1.  
• Speed dial location 95 (#Warranty Center) is used to contact Verizon Warranty Center.  
• Speed dial location 96 (#DATA) is used to check your data usage.  
• Speed dial location 97 (#BAL) is used to check your billing balance.  
• Speed dial location 98 (#MIN) is used to check your Verizon Wireless usage.  
• Speed dial location 99 (#PMT) is used to make a bill payment.  
• Speed dial location 411is used to check the directory listing database information.  
To use speed dials, you must first ensure the one touch dial feature is enabled. See "One Touch Dial," p. 48.  
Assign a Speed Dial Location  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Speed Dials.  
4. Scroll to an unassigned speed dial location, and press the  
Key (SET).  
5. To select a contact entry, scroll to the desired contact, and press the  
Key.  
6. To select a number for speed dial for a contact with more than one number, scroll to the desired number, and press the  
Key.  
7. Press the  
Key to select Yes.  
Edit a Speed Dial Location  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Speed Dials.  
4. Scroll to an assigned speed dial slot, and press the  
Key (SET).  
5. Press the  
6. Scroll to the contact you want assigned to the selected speed dial slot, and press the  
contact with more than one number, scroll to the desired number, and press the Key.  
7. Press the Key to select Yes and set the speed dial number to the new contact.  
Key to select Yes to overwrite the existing speed dial number.  
Key. To select a number for a  
Remove a Speed Dial Location  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Speed Dials.  
4. Scroll to an assigned speed dial slot, and press the Right Soft Key (Remove).  
5. Press the  
Key to select Yes.  
Contacts  
32  
     
E m e r g e n c y C o n t a c t s  
Emergency Contacts  
In Case of Emergency (ICE) allows you to store names, phone numbers and other information, which will be helpful in case  
of emergency.  
Tip: When you have assigned ICE contacts and your device is locked, press the Left Soft Key (ICE) to view the emergency  
information without unlocking the device.  
Add a New ICE Contact  
You can set up to three contacts as your In Case of Emergency (ICE) contacts. You can call ICE contacts even if your device  
A contact can only be assigned as one ICE contact. If you assign the same contact to different ICE contacts, your device  
accepts the last assignment only.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press In Case of Emergency.  
4. Scroll to an unassigned contact, press the  
Key (ADD).  
• If From Contacts is selected, scroll to a contact, and press the  
Key.  
• If New Contact is selected, enter the contact information, and press the  
Key (SAVE).  
ICE Contacts Options  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press In Case of Emergency.  
4. Scroll to an assigned contact, and from the following:  
• To call the ICE contact, press the Left Soft Key (Call).  
• To view the details of the contact, press the  
Key (VIEW).  
• For further contact options, press the Right Soft Key (Options). To assign another contact as the ICE contact entry,  
select Re-assign and press the  
Key. See "Add a New ICE Contact," p. 33. To unassign the entry, select Unassign  
and press the  
Key.  
Personal Information  
Add Personal Information  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To create personal information of your own or for ICE contacts, press the  
Key (MENU), and press Contacts.  
3. Press In Case of Emergency, scroll to Personal Info, and press the  
Key (VIEW).  
4. Scroll to a blank note, and press the  
5. After adding the information, press the  
Edit or Erase a Note  
Key (ADD).  
Key (SAVE) to retain it, or press the Right Soft Key (Cancel) to exit.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Contacts.  
3. Press In Case of Emergency, scroll to Personal Info, and press the  
4. Scroll to an existing note, and press the Key (VIEW).  
Key (EDIT). To remove the note, press the Right Soft Key (Erase), and then press the  
Key (VIEW).  
5. To edit the note, press the  
Key to select Yes.  
My Name Card  
Edit Name Cards  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Contacts.  
3. Press My Name Card.  
Contacts  
33  
       
L i g h t E f f e c t s  
4. Scroll to each field, and enter the name, numbers, or email address using the keypad.  
5. Press the Key (SAVE).  
Send Name Cards  
You can send name cards to compatible devices you have paired with using Bluetooth connectivity. To enable this  
function, Bluetooth must be turned on. See "Bluetooth Wizard," p. 39.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press My Name Card.  
4. Press the Right Soft Key (Send).  
5. The phone displays BLUETOOTH POWER OFF if Bluetooth isn't currently active. Select Yes and press the  
Key. For  
more information on how to turn Bluetooth on, see "Activate or Deactivate Bluetooth Connectivity," p. 40.  
6. Select Add New Device and press the  
7. "PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE" will appear on-screen. Press the  
device you would like to send the Name Card to and press the Key (PAIR).  
8. You may receive the message Does the passkey match?, select Yes or No and press the  
Key.  
Key. Select the  
Key.  
9. The device you are pairing with displays a confirmation message before connecting to your device. Select Always Ask or  
Always Connect, and press the  
Key.  
10. Scroll to the device and press the  
Key to send the Name Card.  
Light Effects  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Contacts.  
3. Press Light Effects.  
4. Select Breathing Light Duration, Default Light Color, Miscellaneous Alerts, or Unknown Contacts, and press the  
Key.  
5. Select the desired setting, and press the  
Key to set.  
Contacts  
34  
   
M o b i l e E m a i l  
Section 8: Email  
Topics Covered  
• Mobile Email  
• Corporate Email  
• Mobile Web Mail  
This section describes how to log into your email account, and send email messages. You can save up to five email  
accounts for sending and receiving email messages. These are network services.  
Mobile Email  
You can use Mobile Email to access your preferred email service provider. You can log in to receive and send emails.  
Save an Email Account  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Email.  
3. Press Mobile Email. Listen to the voice instruction, or press the  
Key to begin a browser session and follow the on-  
screen prompts.  
Corporate Email  
You can use Corporate Email to access your email account, calendar appointments, and Microsoft Outlook contacts  
information.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Email.  
3. Press Corporate Email. Listen to the voice instruction, or press the  
Key to begin a browser session and follow the  
on-screen prompts.  
Mobile Web Mail  
You can use Mobile Mail to access the Verizon Wireless homepage, browse the internet, and access your email accounts.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Email.  
3. Press Mobile Web Mail. A Mobile Web session starts.  
• To change browser settings, send a URL link in a new text message, or view web page and browser information, press  
the Right Soft Key (Menu), and select from the available options.  
• To browse the internet, press the Left Soft Key (Navigate), and select from the available options.  
Email  
35  
           
S i g n i n t o y o u r I M A c c o u n t  
Section 9: Mobile Instant Messaging  
Topics Covered  
• Sign in to your IM Account  
This section describes how to sign in to your instant messaging account.  
Sign in to your IM Account  
You can access instant messaging services from AOL Instant Messenger, Windows Live Messenger, and Yahoo! Messenger.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Select AIM, WL Messenger or Yahoo! and press the  
4. Follow the on-screen prompts to download and login to the desired application.  
Key (MENU), and press Mobile IM.  
Key.  
Mobile Instant Messaging  
36  
   
G e t N e w A p p l i c a t i o n s  
Section 10: My Ringtones  
Topics Covered  
• Get New Applications  
• Apply a Ringtone  
• Play a Ringtone  
This section describes how to download ringtones. It also describes how to set your favorite music as a ringtone, a contact  
ID for a particular contact, or as alert sounds for incoming messages.  
Get New Applications  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. To download ringtones or use one of the tones stored in the device, press the  
Key (MENU), and press My  
Ringtones.  
3. Press Get New Applications, and press Get New Applications again. Follow the on-screen prompts.  
Apply a Ringtone  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press My Ringtones.  
3. Scroll to a ringtone, and press the Left Soft Key (Set As).  
• To set it as your default ringtone, press Ringtone.  
• To set it as a contact ID for a particular contact, press Contact ID. Select the desired contact, and press the  
Key.  
• To set it as alert sounds for incoming messages, press Alert Sounds. Select All Messages, TXT Message, Pic/Video/  
Voice Message or Voicemail, and press the Key.  
Play a Ringtone  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press My Ringtones.  
3. Scroll to a ringtone, and press the Key (PLAY).  
My Ringtones  
37  
         
V Z N a v i g a t o r  
Section 11: VZ Navigator  
Topics Covered  
• VZ Navigator  
VZ Navigator  
VZ Navigator supports GPS-related service, helping you find your way. With VZ Navigator, you can get your current  
location, or get directions from the current location to a selected address.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press VZ Navigator.  
3. Follow the voice instructions to download navigator applications.  
To use this service, you must activate Location On, see "Location," p. 45.  
VZ Navigator  
38  
     
M y V e r i z o n  
Section 12: Settings  
Topics Covered  
• My Verizon  
• Bluetooth  
• Sounds Settings  
• Display Settings  
• Habitat Mode  
• Touch Key Settings  
• Phone Settings  
• Call Settings  
• Memory  
• USB Mode  
• Phone Information  
This section describes how to define settings for your device.  
My Verizon  
My Verizon connects to the Verizon Wireless Mobile Web, which allows you to check your balance, minutes or make  
payments, add or remove features, reset voicemail passwords and more all from your device. For more information, see  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press My Verizon. A Mobile Web session starts.  
Tip: From Idle Mode, to quickly access My Verizon, press the Directional Key left.  
Bluetooth  
Bluetooth technology enables wireless connections between electronic devices within a range of 10 meters (33 feet). A  
Bluetooth connection can be used to send images, gallery files, or to connect wirelessly to other devices using Bluetooth  
technology, such as computers. You can synchronize your device and your PC using Bluetooth connectivity.  
Since devices using Bluetooth technology communicate using radio waves, your device and the other devices do not need  
to be in direct line-of-sight. However, the connection can be subject to interference from obstructions, such as walls, or  
other electronic devices.  
This device is compliant with Bluetooth specification 2.1+EDR supporting the following profiles: Headset, Handsfree, Dial  
Up Networking, Stereo, Phonebook Access, Basic Printing, Object Push to vCard and vCalendar, File Transfer, and Basic  
Imaging.  
To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved accessories for  
this model. Check with the manufacturers of other devices to determine their compatibility with this device.  
There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or Verizon  
Wireless. For more information, see the Bluetooth Technology organization website:  
Security Tips  
• Operating the device in hidden mode is a safer way to avoid malicious software.  
• Do not accept Bluetooth connectivity from sources you do not trust.  
• Alternatively, switch off the Bluetooth function. This does not affect other functions of the device.  
Bluetooth Wizard  
When you access the Bluetooth menu for the first time, you are prompted to launch the Bluetooth Wizard.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
Settings  
39  
         
S o u n d s S e t t i n g s  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Bluetooth Menu. Follow the on-screen prompts to pair with a device, or exit the Bluetooth Wizard.  
Activate or Deactivate Bluetooth Connectivity  
To use Bluetooth features, you must activate Bluetooth connectivity.  
Note: Features using Bluetooth technology increase the demand on battery power and reduce the battery life.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Bluetooth Menu.  
4. Press the Left Soft Key (Turn On/Turn Off) to activate or deactivate Bluetooth connectivity.  
Pair  
To send or receive information via Bluetooth connectivity, you must pair with a recognized Bluetooth wireless device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Bluetooth Menu. You are prompted to launch the Bluetooth Wizard.  
4. Press Yes to launch the Bluetooth Wizard, Remind me later, or No, don't show again.  
If the Bluetooth Wizard is not launched, scroll to Add New Device, and press the  
switched off, Turn Bluetooth power on? is displayed. Press the Key to select Yes.  
Key. If Bluetooth® power is  
5. The handset will prompt you with the following message on the screen: PLACE DEVICE YOU ARE CONNECTING TO IN  
DISCOVERABLE MODE. Press the Key.  
6. Your device will search for Bluetooth devices nearby and then display a list of available devices. Press down on the  
Directional Key until you have highlighted the device you want to pair with, and then press the Key (PAIR).  
7. If applicable, the handset may prompt you for the password. Consult the Bluetooth® accessory (sold separately)  
instructions for the appropriate passkey (typically 0000). Enter the passkey, then press the Key.  
8. Select Always Ask or Always Connect and press the  
Key. Connect to : (Device Name) will appear on-screen, select  
Yes or No and press the  
Key. Your phone will then pair with the device.  
Bluetooth Settings  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Bluetooth Menu.  
4. To configure the Bluetooth settings, press the Right Soft Key (Options) and select from the following:  
Bluetooth Wizard — Quickly configure settings for Bluetooth.  
My Phone Name — Enter a customized name for device recognition.  
Discovery Mode — Allow other devices to see your device.  
Sharing — Activate or deactivate picture and video sharing.  
Supported Profiles — Display a list of supported Bluetooth profiles. Scroll to a profile, and press  
the details.  
Key (VIEW) to see  
Sounds Settings  
You can adjust the volume and assign sounds to phone calls and alarms.  
Easy Set-up  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Easy Set-up, and then select from the following:  
CALL SOUNDS — Set the alert type for an incoming call.  
KEYPAD VOLUME — Set the volume of the keypad.  
TEXT MESSAGE ALERT — Set the alert type for an incoming text message.  
Settings  
40  
       
D i s p l a y S e t t i n g s  
PIC/VIDEO/VOICE MESSAGE ALERT — Set the alert type for an incoming picture or voice message.  
VOICEMAIL MESSAGE ALERT — Set the alert type for an incoming voicemail message.  
4. Press the Right Soft Key (Skip) to ignore the setting, or press the  
Key (SET) to accept your setting.  
5. Repeat step 3 until the set-up is completed.  
Call Sounds  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Call Sounds, and then select from the following:  
Call Ringtone — To set ringtones for incoming calls, scroll to the desired ringtone, and press the  
Call Vibrate — To set the device to vibrate when receiving a call, select On.  
Key.  
Call Alert — To set the phone to ring or read caller ID automatically when receiving a call, select Ring Only, Caller ID +  
Ring or Name Repeat.  
Alert Sounds  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Alert Sounds.  
4. Select the alert type for an incoming text, picture, video, or voice message, voicemail, emergency tone, or missed call.  
Keypad Volume  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Keypad Volume.  
4. To set the volume for the keypad, press the Directional Key up or down, and then press the  
Key.  
Digit Dial Readout  
You can set the device to read the number automatically when you press the corresponding digit.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, and then press Digit Dial Readout.  
4. Scroll to On, and press the  
Key.  
Service Alerts  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Service Alerts, and then select from the following:  
ERI — Enhanced roaming indicator (ERI) displays the status of the mobile service (network service). The status can be  
"Verizon Network", "Extended Network", or "Roaming". See "Banner," p. 42. Select On or Off, and press the  
Key.  
Minute Beep — Sounds an alert every minute while on a call. Select On or Off, and press the  
Call Connect — Sounds an alert when a call is connected. Select On or Off, and press the  
Key.  
Key.  
Power On/Off  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Sound Settings, press Power On/Off, and press the  
4. Select Power On or Power Off, and press the Key.  
Key.  
5. Select On or Off, and press the  
Key.  
Display Settings  
The Display settings menu provides the possibilities to modify the look and feel of the phone display.  
Settings  
41  
       
D i s p l a y S e t t i n g s  
Easy Set-up  
You can set up display settings quickly.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Easy Set-up, and select from the following:  
PERSONAL BANNER — Enter your own banner text of up to 18 characters.  
DISPLAY BACKLIGHT — Set the backlight duration for the main display.  
KEYPAD BACKLIGHT — Set the backlight duration for the keypad.  
WALLPAPER — Set a picture as the main wallpaper.  
DISPLAY THEMES — Set the display theme.  
MENU LAYOUT — Set the main menu layout.  
MENU TYPE — Set the menu type to messaging or personalizing.  
DIAL FONTS — Set the dial font size.  
CLOCK FORMAT — Set the format for the clock.  
4. Press the Right Soft Key (Skip) to ignore the setting, or press the  
Key (SET) to accept your setting.  
5. Repeat step 3 until the set-up is completed.  
Banner  
You can create your own personalized greeting that appears from Idle Mode or select the ERI Banner which displays the  
network to which you have subscribed.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Banner, and then select from the following:  
Personal Banner — Enter your own banner text of up to 18 characters, and press the  
Key.  
ERI Banner — Display ERI text over your personal banner, alerting you to the current cellular status (network service).  
Select On or Off, and press the Key.  
Backlight  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Backlight, and select Display or Keypad to set how long the display or keypad  
backlight remains on before dimming.  
4. Select the desired time duration, and press the  
Key (SET).  
Wallpaper  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Wallpaper, and then select from the following:  
My Pictures — Select an image as the main display background, and press the  
My Videos — Select a video clip as the main display background, and press the  
Key.  
Key.  
Habitat Mode — Select a Habitat theme as the main display background, and press the  
Key.  
Display Themes  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, and then press Display Themes.  
4. Scroll to the desired option, and press the  
The default display theme is White.  
Main Menu Settings  
Key (SET).  
1. Swivel open the phone to reveal the full QWERTY keypad.  
Settings  
42  
     
H a b i t a t M o d e  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Main Menu Settings, and select from the following:  
Menu Layout — Select Tab, List, or Grid, and press the  
Key. The default Menu Layout is Grid.  
Replace Menu Items — Select the menu item you wish to replace, and press the  
Key (EDIT). A list of menu items is  
displayed. Select the desired menu item, and press the  
Key (SET).  
Position Menu Items - Select the menu item you wish to move, and press the  
select the desired menu position, and press the Key (SWAP).  
Key (MOVE). Use the Directional Key to  
Reset Menu Settings — Select Menu Layout, Menu Items, Item Positions or All, and press the  
device default settings.  
Key to reset to the  
Dial Fonts  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, and then press Dial Fonts.  
4. Scroll to Normal or Large Only, and press the  
Key.  
Menu Font Size  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, and then press Menu Font Size.  
4. Scroll to Normal or Large, and press the  
Key.  
Clock Settings  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Display Settings, press Clock Settings, and then select from the following:  
Clock Format — Select from analog and digital clock formats, and press the Key.  
Clock Screensaver — Set the clock screensaver to On, On After Animation, or Off, and press the  
Display While Powered Off — Set the clock to display when the phone is powered off by selecting On or Off and pressing  
the Key.  
Key.  
Home Screen Font Color  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Display Settings, press Home Screen Font Color.  
4. Scroll to the desired option, and press the Key (SET).  
Key (MENU), and press Settings & Tools.  
This setting does not apply when a Habitat Mode is used.  
Habitat Mode  
Habitat Modes enhance the display theme. They provide a unique and interactive way to connect with your social circle.  
When you call or send a message to someone, that person appears in front of your habitat.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Habitat Mode, scroll to a mode, and press the  
• To preview the mode, press the Left Soft Key (Preview).  
• To view instructions, press the Right Soft Key (Help).  
The default Habitat Mode is Super World.  
Key.  
Touch Key Settings  
The menu allows you to select the sensitivity of the touch keys and enable vibration feedback.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
Settings  
43  
           
P h o n e S e t t i n g s  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Touch Key Settings.  
4. Select the desired setting for Touch Key Sensitivity, Vibration Feedback, and Feedback Pattern by scrolling left of right  
with the Directional Key, and press the  
Key (SAVE) to set.  
Phone Settings  
The Phone Settings menu allows you to designate specific network settings and operational modes for your device.  
Airplane Mode  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Phone Settings, and then press Airplane Mode.  
4. Scroll to On or Off, and press the Key.  
Key (MENU), and press Settings & Tools.  
Warning: With Airplane Mode you cannot make or receive any calls, expect for making emergency calls, or use other  
features that require network coverage. To make calls, you must first activate the phone function by changing  
profiles. If the device has been locked, enter the lock code. If you need to make an emergency call while the  
device is locked and in Airplane Mode, you may be also able to enter an official emergency number programmed  
in your device in the lock code field and select ’Call’. Despite the device is in Airplane Mode, you can start an  
emergency call without any confirmation to exit it.  
Set Shortcuts  
You can assign applications to the UP, LEFT or DOWN Directional Keys. These can be opened by pressing the corresponding  
keys from Idle Mode. The RIGHT Directional Key is used to access My Shortcuts. The default shortcuts are listed as follow:  
• To access Mobile Web, press the Directional Key up.  
• To activate Habitat Mode, press the Directional Key down.  
• To open My Verizon, press the Directional Key left.  
• To open MY Shortcuts, press the Directional Key right. The default settings of My Shortcuts are:  
1. My Music  
2. New Picture Message  
3. Calculator  
4. Alarm Clock  
To change the shortcuts, do the following:  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Set Shortcuts.  
4. Press Set My Shortcuts, or Set Directional Keys, scroll to the shortcut or the Directional Key to be assigned, and  
press the  
Key (SET).  
5. Scroll to the desired application, and press the  
Key.  
Voice Settings  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, press Voice Commands Settings, and then select from the following:  
Confirm Choices — When your device is unsure of the name or number you have said, a list of three choices is displayed.  
To display the choices, select Automatic or Always Confirm. To display only the best match, select Never Confirm.  
Sensitivity — Select the level of sensitivity when using voice commands. Select More Sensitive, Automatic or Less  
Sensitive, and press the  
Key.  
Train Voice — Adaptation is the process of optimizing the voice recognition software to your voice. Press Train Voice,  
and press the Key to begin the voice training exercise.  
Prompts — Select Mode and then Prompts for the device to prompt you for information, Readout or Readout + Alerts to  
prompt you and read the menu items as you navigate, or Tones Only to prompt you with beeps only.  
Settings  
44  
         
P h o n e S e t t i n g s  
The audio playback setting lets you control if audio is played out from the speakerphone or earpiece. Select Audio  
playback and then Automatic, Speakerphone, or Earpiece to set the audio playback mode determined by phone  
settings.  
About — View information about the voice signal.  
Phone Close Handling  
This setting specifies the screen to display when the device is swiveled closed.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Phone Close Handling.  
4. Scroll to Go to Home Screen or Remain in Current Application, and press the  
Key (SET).  
Swivel Auto Lock  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Swivel Auto Lock.  
4. Scroll to On or Off, and press the  
Key (SET).  
Language  
The display language can be set to English or Spanish.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Language.  
4. Scroll to English or Español, and press the  
Key.  
Light Effects  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Light Effects.  
4. Scroll to Breathing Light Duration, Default Light Color, Miscellaneous Alerts or Unknown Contacts, and press the  
Key.  
5. Select the desired color, and press the  
Key.  
Location  
The Location Global Positioning Service (GPS) setting identifies your location to the network. You can enable this setting  
or set GPS to work only if you call the emergency services.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and then press Location.  
4. Scroll to Location On or E911 Only, and press the  
Key.  
For calls to emergency numbers, location information may be used by the emergency operator to determine the position  
of the device. This feature may not function in all areas or at all times. The functionality and accuracy of this feature are  
dependent on the network, satellite systems, the agency receiving the information and the fold position. Keeping the  
phone swiveled open helps strengthen the signal of the internal GPS antenna.  
Security  
Edit Codes  
To set a new lock code:  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and press Security.  
4. Enter the four-digit lock code, then press the  
5. Press Edit Codes.  
Key.  
Settings  
45  
           
P h o n e S e t t i n g s  
6. Select one of the following settings, then press the  
Key.  
Phone Only — Allows you to edit the lock code for Security. (The default lock code is the last 4 digits of your mobile  
number.)  
Calls & Services — Allows you to edit the lock code for Restrictions. (The default lock code is the last 4 digits of your  
mobile number.)  
7. If Phone Only is selected, enter the new four-digit code in the Enter New Code: field. Enter the new four-digit code  
again in the Re-enter New Code: field to confirm your input, then press the  
Key.  
8. If Calls & Services is selected, enter the current lock code in the Enter Current Code: field. Enter the new four-digit code  
in the Enter New Code: field. Enter the new four-digit code again in the Re-enter New Code: field, then press the  
Key.  
Restrictions  
Use the following procedure to configure Location Setting, Calls and Messages restrictions.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. From Idle Mode, press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and press Security.  
4. Enter the four-digit lock code, then press the  
5. Press Restrictions.  
6. Enter the four-digit lock code again, then press the  
7. Select one of the following settings:  
Key. The default lock code is the last 4 digits of your mobile number.  
Key.  
Location Setting Unlock Setting or Lock Setting.  
Calls Incoming Calls or Outgoing Calls.  
• For Incoming Calls, set Allow All, Contacts Only or Block All.  
• For Outgoing Calls, set Allow All, Contacts Only or Block All.  
Messages Incoming Messages or Outgoing Messages.  
• For Incoming Messages, set Allow All or Block All.  
• For Outgoing Messages, set Allow All or Block All.  
Dial-Up Modem Allow or Block.  
8. Press the  
Key.  
Phone Lock Setting  
This setting specifies whether the phone should be locked whenever it is turned on. Lock Mode prevents the unauthorized  
use of your phone. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still make  
emergency calls.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. From Idle Mode, press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and press Security.  
4. Enter the four-digit lock code, then press the  
5. Press Phone Lock Setting.  
6. Select one of the following settings, then press the  
Unlocked — Phone is unlocked.  
Key. The default lock code is the last 4 digits of your mobile number.  
Key.  
On Power Up — Phone will lock when it is turned on.  
Lock Phone Now  
Lock the phone now.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. From Idle Mode, press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and press Security.  
4. Enter the four-digit lock code, then press the  
Key. The default lock code is the last 4 digits of your mobile number.  
Settings  
46  
C a l l S e t t i n g s  
5. Press Lock Phone Now.  
6. To unlock the phone from Idle Mode, press the  
enter the four-digit lock code, then press the  
Key to unlock the keypad, then press the Right Soft Key (Unlock) and  
Key.  
Restore Phone  
To delete all User Date and restore all settings to their initial defaults:  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. From Idle Mode, press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, and press Security.  
4. Enter the four-digit lock code, then press the  
5. Press Restore Phone.  
Key.  
6. A confirmation message appears in the display, select Yes, and then press the Key.  
System Select  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, press System Select, and then select from the following:  
Home Only — Make and receive calls in your home area only.  
Automatic — Search for service in another network. The roaming rate applies when you are not in the home service  
area.  
4. Press the  
Key to set.  
NAM Select  
If your device is registered with two phone numbers using number assignment modules (NAM) (for example, work and  
personal numbers), you can select which number to use as your origination number.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Settings, press NAM Select.  
4. Scroll to NAM 1 or NAM 2, and press the  
Key.  
Call Settings  
You can define how your device handles incoming and outgoing calls.  
Answer Options  
You can define how calls are answered on your device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press Answer Options.  
4. Scroll to the method you wish to use for answering calls, and press the  
5. Press the Left Soft Key (Done).  
Key (MARK).  
The default setting is Swivel Open.  
Text Response  
You can send a text response when you are not able to answer a call.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press TXT Response.  
• If you do not want to send a text response, scroll to Off.  
• To send a text response, scroll down to the Message field, and edit the message content.  
4. Press the Key (SAVE).  
Settings  
47  
         
C a l l S e t t i n g s  
Auto Retry  
Occasionally, your network may experience heavy traffic resulting in a fast busy signal when you dial. With automatic  
retry, your phone redials the number (the number of times is specified by the network) and notifies you when the network  
is available.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press Auto Retry.  
4. Scroll to a time period, and press the  
Key (SET).  
TTY Mode  
A phone with teletype/telecommunication device for the deaf (TTY/TDD) support can translate typed characters to voice.  
Voice can also be translated into characters and displayed on the TTY. To attach a TTY enabling you to communicate with  
parties also using a TTY device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, press TTY Mode, and select from the following:  
TTY Full — Activate full TTY capability.  
TTY + Talk — Activate voice carry-over (VCO) mode.  
TTY + Hear — Activate TTY in hearing carry-over (HCO) mode.  
TTY Off — Deactivate TTY mode.  
4. Press the  
Key.  
HAC Mode  
Whining or buzzing noise may occur when some wireless phones are used near some hearing devices, such as hearing aids.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press HAC Mode.  
4. Scroll to On or Off, and press the  
Key.  
One Touch Dial  
You can use the one touch dial feature by pressing and holding the designated speed dial key. See "Speed Dials," p. 32.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Call Settings, and then press One Touch Dial.  
4. Scroll to On or Off, and press the Key (SET).  
Key (MENU), and press Settings & Tools.  
If set to Off, a long press on the speed dial numbers designated in your Contact List will not function. Otherwise, you need  
to first press the speed dial numbers and then press the Send Key.  
Voice Privacy  
You can use the voice privacy feature to protect the privacy of your phone conversation from other callers placing phone  
calls on the same CDMA network.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press Voice Privacy.  
4. Scroll to On or Off, and press the  
Key.  
DTMF Tones  
Dual Tone Multi-Frequency (DTMF) tones or touch tones are sound designated to the keys on your keypad. You can use  
touch tones for many automated dial-up services such as banking and airlines or for entering your voicemail box number  
and password.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
Settings  
48  
       
M e m o r y  
3. Press Call Settings, and then press DTMF Tones.  
4. Scroll to Normal or Long, and press the  
Key.  
Assisted Dialing  
Assisted Dialing allows easy dialing of international calls while roaming in another country. Your device recognizes the  
country code and IDD prefix of the country selected.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Call Settings, and then press Assisted Dialing.  
4. In the Assisted Dialing field, select On or Off by using the Directional Key to scroll left or right.  
5. Scroll down to the Reference Country field, and press the Left Soft Key (Set). Select a country, and press the  
Key.  
6. Press the  
Key to set.  
Memory  
You can monitor the amount of phone memory you are using for file storage.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Memory, and select from the following:  
Save Options — Select whether to save to the phone or card memory.  
Phone Memory — To display the total used and available memory (KB or MB, depends on the file size) of the phone, and  
the size of individual folders and files.  
Card Memory — To display the total used and available memory (KB or MB, depends on the file size) of the memory card  
(sold separately), and the size of individual folders and files.  
USB Mode  
You can select the setting for connecting a USB data cable to your device. You can use a USB data cable to transfer media  
files or establish a modem connection.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press USB Mode, and select from the following:  
Media Sync Mode — Transfer multimedia files between your device and PC.  
Modem Mode — Establish a modem connection.  
Ask On Plug — The device asks for the USB Mode each time the USB cable is connected.  
4. Press the  
Key to set.  
Phone Information  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Phone Info, and select from the following:  
My Number — View the active phone number and the mobile identification number.  
SW/HW Version — View the current Software version, PRL version, ERI version, Browser version, Media Center version,  
Other SW version, MSUI version, HW version, ESN or MEID, or SW Update Client for your device.  
Icon Glossary — View the library of screen icons displayed while on a call or when using features. See "Indicators and  
Software Update — To check the status of your current software on your device, select Status. To check if there are new  
software updates available for your device, select Check New.  
4. Press the  
Key.  
Settings  
49  
           
V o i c e C o m m a n d s  
Section 13: Tools  
Topics Covered  
• Voice Commands  
• Calculator  
• Calendar  
• Calendar Preview  
• Alarm Clock  
• Stopwatch  
• World Clock  
• Notepad  
• USB Mass Storage  
This section describes how to access the voice commands, calculator, tip calculator, calendar, calendar preview, alarm  
clock, stopwatch, world clock, notepad, and converter.  
Voice Commands  
Voice commands transform your device into your own virtual personal assistant, letting you use your voice to, for  
example, make phone calls or look up contacts.  
Before using voice services, note the following:  
• Voice commands are language-dependent. They are not dependent on the speaker’s voice.  
• For language setting, see "Language," p. 45.  
• Very short names are not accepted. Use long names, and avoid similar names for different numbers.  
Note: Using voice commands may be difficult in a noisy environment or during an emergency, so you should not rely  
solely upon voice dialing in all circumstances.  
Tip: To quickly access Voice Commands from Idle Mode, press the Voice Commands Key  
.
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Voice Commands, and from the following:  
Call <Name or #> — Say "Call" and then a name or a phone number from your Contact List. For example, "Call Tom  
Smith", "Call Tom Smith’s mobile", or "Call 617 515 212".  
Send <MSG Type> — Say "Send Message" and you are asked for the type of message. After choosing the message type,  
you are asked for the contact name or number.  
If you say a full-sentence command, such as "Send text to Tom", you are asked to confirm the message and give the  
contact number. The corresponding message editor opens.  
Go To <Shortcut> — Say "Go To" to open the list of shortcut options on your device and select the shortcut you want. Or  
say a full command with the application name (for example, "Go To Contacts").  
Check <Item> — Say "Check" and you are asked for a list of items. Or say "Check status" to hear all status information of  
your device, including phone status, voicemail, messages, number of missed calls, time and date, battery level, signal  
strength, and volume.  
Contact <Name> — Say "Contact" and then a name from your Contact List to view information of the saved contact.  
Redial — Say "Redial" to call the last dialed number.  
Play <Playlist> — Say “Play All Songs” or say “Play” and then an individual playlist to play your songs.  
My Verizon — Say "My Verizon" to access your Verizon Wireless account information.  
Help — Say "Help" to see instructions on how to use these commands.  
Tools  
50  
     
C a l c u l a t o r  
For detailed instructions on how to use each command, scroll to the command you want, and then press the Left Soft Key  
(Info).  
To adjust the settings of your voice commands, press the Right Soft Key (Settings). For details, see "Voice Settings," p. 44.  
Calculator  
Calculator allows you to perform simple mathematical calculations using your device.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calculator.  
4. Press Basic Calculator.  
5. Enter the first number of the calculation using the keypad.  
• To change a number to a negative, press  
• To insert a decimal point, press  
.
.
6. Use the Directional Key to add (UP), subtract (DOWN), multiply (RIGHT), or divide (LEFT) values. To enter a parenthesis  
or power, press the Right Soft Key (Operator) and select (, ), or Power by pressing the  
Key.  
7. Enter the second number.  
8. Press the  
Key to solve your equation.  
Note: This calculator has limited accuracy and is designed for simple calculations.  
Tip Calculator  
Tip calculator allows you to calculate tips.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calculator.  
4. Press Tip Calculator.  
5. Enter the amount of your bill using the keypad.  
6. Scroll down, and enter the tip percentage by pressing the Directional Key left or right.  
7. Scroll to the Split field, and enter the number of parties by pressing the Directional Key left or right.  
To reset the calculation, press the Left Soft Key (Reset).  
Converter  
Converter allows you to convert measures from one unit to another.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calculator.  
4. Press Converter.  
5. Enter a Fahrenheit or Celsius degree using the keypad, and press the  
Key.  
Converter Options  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calculator.  
4. Press Converter.  
5. Press the Right Soft Key (Options), and select from the following:  
Set conversion — Select from Temperature, Currency, Weight, Length, Area, Volume or Other, and from the available  
unit conversion options.  
Reverse conversion — Reverse the units being converted.  
Configure — Add new conversions or adjust exchange rates.  
Help — View more information.  
Tools  
51  
       
C a l e n d a r  
Calendar  
Calendar allows you to document your agenda and keep it convenient and easy to access. You can schedule events into  
the calendar and set your device to alert you with a reminder.  
Add a New Event  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calendar.  
4. Scroll to the required event date, press the Left Soft Key (Add), and then update the following:  
• Enter the event title, start and end date, and time using the keypad. To select AM or PM, press the Left Soft Key (AM/  
PM).  
• To set the time zone, scroll to the Time Zone field, press the Left Soft Key (Set), select from Local Time, EST (Eastern  
Standard Time), EDT (Eastern Daylight Time), CST (Central Standard Time), CDT (Central Daylight Time), MST  
(Mountain Standard Time), MDT (Mountain Daylight Time), PST (Pacific Standard Time), PDT (Pacific Daylight Time),  
AKST (Alaska Standard Time), AKDT (Alaska Daylight Time), HAST (Hawaii-Aleutian Standard Time), HADT (Hawaii-  
Aleutian Daylight Time) or GMT/UTC (Greenwich Mean Time/Coordinated Universal Time), and then press the  
Key.  
Tip: You are suggested to select Local Time, which can automatically adjust your device time settings to the local time  
zone.  
• To set the frequency, scroll to the Recurrence field, press the Left Soft Key (Set), select a frequency, and press the  
Key.  
• To set a tone, scroll to the Tone field, press the Left Soft Key (Set), select a tone, and press the  
Key.  
• To turn vibration on, scroll to the Vibrate field, press the Left Soft Key (Set), select an option, and press the  
• To set the alert time, scroll to the Alert Time field, press the Left Soft Key (Set), select an option, and press the  
• To set a reminder, scroll to the Reminder field, press the Left Soft Key (Set), select an option, and press the  
Key.  
Key.  
Key.  
5. To save the settings, press the  
Key (SAVE). The device will prompt you to turn on Calendar Preview. The date  
scheduled with events is highlighted in different color.  
Delete an Existing Event  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calendar.  
4. Scroll to the event date, and press the  
Key (VIEW).  
5. Press the Left Soft Key (Erase), and then press the  
Key to select Yes.  
Update an Existing Event  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Calendar.  
4. Scroll to the event date, and press the  
Key (VIEW).  
5. Scroll to the event entry you want to modify, and press the  
Key (VIEW) again.  
6. Press the Key (EDIT), edit the event entry fields you want to update, and press the  
Key (SAVE).  
Calendar Preview  
Calendar preview reminds you of the events for the current date. It cannot be used together with Habitat Mode.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, press Calendar Preview, and select from the following:  
Home Screen — To display the event information on the Home Screen, select On and press the  
Key (SET). To  
display  
on the Home Screen, select Off and press the  
Key (SET).  
Tools  
52  
       
A l a r m C l o c k  
Font Size — To set the font size of an event, select Normal or Large and press the  
Key (SET).  
Alarm Clock  
Set an Alarm  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Alarm Clock.  
4. Scroll to Alarm 1, Alarm 2, and Alarm 3, and press the  
Key to select from the following:  
• Scroll left or right to activate the alarm in the Set on/ Set off field.  
• To enter the time of day the alarm will sound, scroll to the Set Time field, enter a time using the keypad. Press the Left  
Soft Key to select either AM or PM.  
• To set how often the alarm will occur, scroll to the Frequency field, and scroll left or right to select a time interval.  
• To select an alarm ringtone, scroll to the Ringer field, select the Left Soft Key (Set), select the desired ringtone, and  
press the  
5. Press the  
Key.  
Key (SAVE).  
When an alarm time is reached, the alarm tone sounds or your device vibrates, depending on the master volume settings.  
Select Snooze to turn the alarm off and have it sound again after 10 minutes. Select Dismiss to turn off the alarm.  
Stopwatch  
Stopwatch can be used to measure elapsed time, such as for a sporting event. You can time up to ten records.  
The stopwatch accuracy is not the same as that of a professional instrument. Therefore, it is recommended that you do not  
use it for official competitions or any other event in which a high-precision device would be required to establish exact  
times.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
3. Press Tools, and then press Stopwatch.  
4. Press the Key (START) to start a time.  
Key (MENU), and press Settings & Tools.  
5. Press the Left Soft Key (Split) to time multiple events and mark the elapsed time for each event you are measuring. This  
option is only available while the timer is running.  
6. Press the  
Key (STOP) to stop the watch.  
7. Press the Right Soft Key (Reset) to reset the watch to zero.  
World Clock  
World clock allows you to determine the current time in another time zone or country.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, press World Clock, and the world map is displayed.  
• To display the time of a city, scroll left or right on the world map to the desired city.  
• To view a list of cities, press the Right Soft Key (Cities).  
• To turn daylight savings time On or Off for a city, select the city and press the Left Soft Key (Set DST). Select Yes or  
No, and press the  
4. Press the Key.  
Key.  
Tools  
53  
         
N o t e p a d  
Notepad  
Notepad allows you to add, read, edit, or erase notes.  
1. Swivel open the phone to reveal the full QWERTY keypad.  
2. Press the  
Key (MENU), and press Settings & Tools.  
3. Press Tools, and then press Notepad.  
• To add a note, press the Left Soft Key (New). Enter the note text, and press the  
Key (SAVE).  
• To view a note, scroll to a note, and press the  
• To edit a note, scroll to a note. Press the  
Key (VIEW).  
Key (VIEW), and press the  
Key (EDIT).  
• To delete one note or all notes, scroll to a note, press the Right Soft Key (Options), select Erase or Erase All, and press  
the Key.  
USB Mass Storage  
If a memory card (sold separately) is inserted in your device, you can use your device for USB mass storage.  
To use USB mass storage, you must first ensure USB Mode is set to Media Sync Mode. See "USB Mode," p. 49.  
1. Connect your device to your PC via the USB cable (sold separately).  
2. Swivel open the phone to reveal the full QWERTY keypad.  
3. Press the  
Key (MENU), and press Settings & Tools.  
4. Press Tools, and then press USB Mass Storage.  
5. USB MASS STORAGE Connected is displayed. You may start to transfer files between your PC and your device.  
Tools  
54  
     
A c c e s s o r i e s  
Section 14: Accessories  
Warning: Use only batteries, chargers, and accessories approved by Nokia for use with this particular model. The use of  
any other types may invalidate any approval or warranty, and may be dangerous.  
For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any  
accessory, grasp and pull the plug, not the cord.  
Accessories  
55  
 
C a r e a n d M a i n t e n a n c e  
Care and Maintenance  
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will  
help you protect your warranty coverage.  
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode  
electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.  
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.  
• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp  
or melt certain plastics.  
• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device  
and damage electronic circuit boards.  
• Do not attempt to open the device other than as instructed in this guide.  
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.  
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.  
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.  
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.  
• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could  
damage the device and may violate regulations governing radio devices.  
• Use chargers indoors.  
• Always create a backup of data you want to keep, such as contacts and calendar notes.  
• To reset the device from time to time for optimum performance, power off the device and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any accessory. If any device is not working properly, take it  
to the nearest authorized service facility for service.  
Care and Maintenance  
56  
 
A d d i t i o n a l S a f e t y I n f o r m a t i o n  
Additional Safety Information  
Small children  
Your device and its accessories may contain small parts. Keep them out of the reach of small children.  
Operating environment  
This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at  
least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it  
should not contain metal and should position the device the above-stated distance from your body.  
To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data  
files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are  
followed until the transmission is completed.  
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic  
storage media near the device, because information stored on them may be erased.  
Medical devices  
Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately  
protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately  
shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any  
regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend that a minimum separation of 15.3 centimeters (6 inches) should be maintained  
between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to  
avoid potential interference with the medical device. Persons who have such devices should:  
• Always keep the wireless device more than 15.3 centimeters (6 inch) from the medical device when the wireless device is  
turned on.  
• Not carry the wireless device in a breast pocket.  
• Hold the wireless device to the ear opposite the medical device to minimize the potential for interference.  
• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.  
• Read and follow the directions from the manufacturer of their implanted medical device.  
If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.  
Warning: For hearing aid compatibility, you must turn off the Bluetooth connectivity.  
Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone  
or higher value. The M-value, shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-value  
generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will  
operate with certain hearing aids. Some hearing aids are more immune than others to interference. Please consult your hearing  
health professional to determine the M-rating of your hearing aid and whether your hearing aid will work with this device.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel  
injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more  
information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.  
Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment  
in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in  
the same compartment as the device, its parts, or accessories. For vehicles equipped with an air bag, remember that air bags  
inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag  
or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious  
injury could result.  
Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless  
teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may  
be illegal.  
Additional Safety Information  
57  
 
P o t e n t i a l l y e x p l o s i v e e n v i r o n m e n t s  
Potentially explosive environments  
Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially  
explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near  
gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas;  
chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air  
contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles  
using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.  
Emergency calls  
Important: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If  
your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular  
phone. The device will attempt to make emergency calls over both the cellular networks and through your internet  
call provider if both are activated. Connections in all conditions cannot be guaranteed. You should never rely  
solely on any wireless device for essential communications like medical emergencies.  
To make an emergency call:  
1. If the device is not on, switch it on. Check for adequate signal strength.  
2. Press the End/Power Key as many times as needed to clear the display and ready the device for calls.  
3. Enter the official emergency number for your present location. Emergency numbers vary by location.  
4. Press the Send Key.  
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the  
only means of communication at the scene of an accident. Do not end the call until given permission to do so.  
Certification Information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves  
recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP  
and include safety margins designed to assure the protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The  
SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are  
conducted using standard operating positions with the device transmitting at its highest certified power level in all tested  
frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is  
designed to use only the power required to reach the network. That amount changes depending on a number of factors such  
as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at  
the ear is 0.70 W/kg.  
Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and testing  
requirements and the network band. Additional SAR information may be provided under product information at  
Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal  
Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one  
gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.12 W/kg  
and when properly worn on the body is 0.61 W/kg.  
Additional Safety Information  
58  
 
Index  
A
accessories  
G
H
B
I
battery  
L
M
C
media  
call settings  
message group  
caller  
messages  
calls  
charger  
contacts  
N
network  
D
default number  
device  
downloading  
O
P
picture  
E
Q
R
F
59  
 
S
tools  
settings  
sounds  
V
V CAST  
W
wireless  
T
text entry  
60  

Sprint Nextel LA990009 0462 User Manual
Sony ICF C7IP User Manual
Sharp MD MT866H User Manual
Sears Chipper 552493 User Manual
Seagate SAVVIO 10K2 SAS ST9146802SS User Manual
Samsung SCH r300 User Manual
Samsung SGH T819 User Manual
Philips MT3120 User Manual
Pantech breEZe C520 User Manual
Nokia Cell Phone E90 User Manual