Nokia PHONE 6700 User Manual

Nokia 6700 slide User Guide

Issue 2.0

Contents

Music player

FM Radio

Settings

Application settings

Device and SIM card security

Common accessory settings

Restore original settings

Data management

Install or remove applications

File manager

Device manager

Connectivity

Transfer content from another

Product and safety information

Index

Safety

WATER-RESISTANCE

Your device is not water-

resistant. Keep it dry.

Safety

Read these simple guidelines. Not

following them may be dangerous or

illegal. Read the complete user guide for

further information.

About your device

The wireless device described in this guide

is approved for use on the(E)GSM 850, 900,

1800 and 1900 networks, and UMTS 850,

1900 and 2100 HSDPA and HSUPA

SWITCH ON SAFELY

Do not switch the device on

when wireless phone use is

prohibited or when it may

cause interference or danger.

networks. Contact your service provider

for more information about networks.

ROAD SAFETY COMES FIRST

Your device supports several connectivity

methods and like computers may be

exposed to viruses and other harmful

content. Exercise caution with messages,

connectivity requests, browsing, and

downloads. Only install and use services

and software from trustworthy sources

that offer adequate security and

Obey all local laws. Always keep

your hands free to operate the

vehicle while driving. Your first

consideration while driving

should be road safety.

INTERFERENCE

protection, such as applications that are

Symbian Signed or have passed the Java

Verified™ testing. Consider installing

antivirus and other security software on

your device and any connected computer.

All wireless devices may be

susceptible to interference,

which could affect

performance.

SWITCH OFF IN RESTRICTED AREAS

Your device may have preinstalled

bookmarks and links for third-party

internet sites and may allow you to access

third-party sites. These are not affiliated

with Nokia, and Nokia does not endorse

or assume liability for them. If you access

such sites, take precautions for security or

content.

Follow any restrictions. Switch

the device off in aircraft, near

medical equipment, fuel,

chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may

install or repair this product.

Warning:

To use any features in this device, other

than the alarm clock, the device must be

switched on. Do not switch the device on

when wireless device use may cause

interference or danger.

ACCESSORIES AND BATTERIES

Use only approved accessories

and batteries. Do not connect

incompatible products.

Safety

When using this device, obey all laws and activated in your device. If so, these

respect local customs, privacy and

legitimate rights of others, including

copyrights. Copyright protection may

prevent some images, music, and other

content from being copied, modified, or

transferred.

features will not appear on your device

menu. Your device may also have

customized items such as menu names,

menu order, and icons.

Make back-up copies or keep a written

record of all important information stored

in your device.

When connecting to any other device,

read its user guide for detailed safety

instructions. Do not connect incompatible

products.

The images in this guide may differ from

your device display.

Refer to the user guide for other

important information about your device.

Network services

To use the device you must have service

from a wireless service provider. Some

features are not available on all networks;

other features may require that you make

specific arrangements with your service

provider to use them. Network services

involve transmission of data. Check with

your service provider for details about

fees in your home network and when

roaming on other networks. Your service

provider can explain what charges will

apply. Some networks may have

limitations that affect how you can use

some features of this device requiring

network support such as support for

specific technologies like WAP 2.0

protocols (HTTP and SSL) that run on TCP/

IP protocols and language-dependent

characters.

Your service provider may have requested

that certain features be disabled or not

Find help

Downloading software updates may

involve the transmission of large amounts

of data (network service).

Make sure that the device battery has

enough power, or connect the charger

before starting the update.

Find help

Support

When you want to learn more about how

to use your product or you are unsure how

your device should function, see the

support pages at www.nokia.com/

support or your local Nokia website,

www.nokia.mobi/support (with a mobile

device), the Help application in the device,

or the user guide.

Warning:

If you install a software update, you

cannot use the device, even to make

emergency calls, until the installation is

completed and the device is restarted. Be

sure to back up data before accepting

installation of an update.

If this does not resolve your issue, do one

of the following:

•

Restart the device: switch off the

device, and remove the battery. After

about a minute, replace the battery,

and switch on the device.

After updating your device software or

applications using Software update, the

instructions related to the updated

applications in the user guide or the helps

may no longer be up to date.

Restore the original factory settings

as explained in the user guide. Your

documents and files will be deleted in

the reset, so back up your data first.

Select Options and from the following:

Update your device software regularly

for optimum performance and

possible new features, as explained in

the user guide.

Start update — Download the available

updates. To unmark specific updates that

you do not want to download, select the

updates from the list.

Update via PC — Update your device

using a PC. This option replaces the Start

update option when updates are only

available using the Nokia Software

Updater PC application.

If your issue remains unsolved, contact

Nokia for repair options. See

www.nokia.com/repair, or in Latin

America, www.nokia-latinoamerica.com/

centrosdeservicio. Before sending your

device for repair, always back up the data

in your device.

View details — View information on an

update.

View update history — View the status

Software updates over the air

of previous updates.

Select

>Settings >Data mgr. >SW

Settings — Change the settings, such as

the default access point used for

downloading updates.

update.

With Software update (network service),

you can check if there are updates

available for your device software or

applications, and download them to your

device.

Disclaimer — View the Nokia licence

agreement.

Find help

Update software using your PC

Nokia Software Updater is a PC application switch between help texts and the

that enables you to update your device application that is open in the

When you are reading the instructions, to

software. To update your device software, background, press and hold the menu key,

you need a compatible PC, broadband

internet access, and a compatible USB

data cable to connect your device to the

PC.

and select from the list of open

applications.

To get more information and to download

the Nokia Software Updater application,

go to www.nokia.com/softwareupdate,

or in Latin America, www.nokia-

latinoamerica.com/nsu.

In-device help

Your device contains instructions to help

to use the applications in your device.

To open help texts from the main menu,

select

>Help >Help and the

application for which you want to read

instructions.

When an application is open, to access the

help text for the current view, select

Options >Help.

When you are reading the instructions, to

change the size of the help text, select

Options >Decrease font size or

Increase font size.

You can find links to related topics at the

end of the help text.

If you select an underlined word, a short

explanation is displayed.

Help texts use the following indicators:

shows a link to a related help

topic

shows a link to the application

being discussed

Get started

Lower the SIM card holder (4), and

slide it forward to lock it (5).

Get started

Insert SIM card and battery

Insert the battery.

To replace the back cover, direct the

bottom locking catches toward their

slots (1), and press until the cover

locks into place (2).

To remove the back cover of the

device, open the micro USB connector

cover, press the release button, and

lift the back cover off.

Slide the SIM card holder back to

unlock it (1), lift the SIM card holder

(2), and slide the SIM card into the SIM

card holder (3).

Always switch the device off and

disconnect the charger before removing

the battery.

Insert a memory card

The memory card may be supplied with

the device, and may already be inserted.

Remove the back cover of the device.

Ensure that the contact area on the

card is facing down on the device, and

the beveled corner is facing down in

the SIM card holder.

Place the card in the slot with the

contact area facing down (1), and

Get started

push the card gently to lock it into

place (2).

USB charging

You can use USB charging when a wall

outlet is not available. When charging

Replace the back cover.

your device with the USB data cable, the

charging time is longer. USB charging

efficiency varies significantly. In some

cases, it may take a very long time for

charging to start and the device to start

functioning.

With USB charging, you can also transfer

data with the USB data cable while

charging the device.

Charge the battery

Your battery has been partially charged at

the factory. If the device indicates a low

charge, do the following:

Connect the charger to a wall outlet.

Connect the charger to the device.

Connect a compatible USB device to

your device using a compatible USB

data cable.

Depending on the type of the device

that is used for charging, it may take

a while for charging to start.

If the device is switched on, select

from the available USB mode options

on the display of the device.

Switch the device on and off

When the battery is fully charged,

disconnect the charger from the

device, then from the wall outlet.

You do not need to charge the battery for

a specific length of time, and you can use

the device while it is charging. If the

battery is completely discharged, it may

take several minutes before the charging

indicator appears on the display or before

any calls can be made.

Tip: If you have old compatible Nokia

chargers, you can use them with your

device by attaching the CA-44 charger

adapter to the old charger. The adapter is

available as a separate accessory.

Press and holdthe power key toswitchthe

device on and off. Press the power key

briefly to end a call or close an application.

10 Get started

If the device asks for a PIN code, enter the availability, contact your service provider

PIN code, and select OK.

or nearest authorized Nokia dealer.

If the device asks for the lock code, enter

the lock code, and select OK. The factory

setting for the PIN code is 12345.

To set the correct time zone, time, and

date, select the country you are presently

in, then enter the local time and date.

When you receive a configuration

message, and the settings are not

automatically saved and activated, 1 new

message is displayed. To save the

settings, select Show >Options >Save.

You may need to enter a PIN code

provided by the service provider.

Antenna locations

Settings wizard

Your device may have internal and

external antennas. Avoid touching the

antenna area unnecessarily while the

antenna is transmitting or receiving.

Contact with antennas affects the

communication quality and may cause a

higher power level during operation and

may reduce the battery life.

Select

>Settings >Sett. wizard.

Use Settings wizard to define e-mail and

connection settings. The availability of the

items in Settings wizard depends on the

features of the device, SIM card, service

provider, and the data in the Settings

wizard database.

To start Settings wizard, select Start.

To get the best results when using the

settings wizard, keep your SIM card

inserted in the device. If the SIM card is not

inserted, follow the instructions on the

display.

Select from the following:

Configuration settings

Operator — Define the operator-specific

settings, such as MMS, Internet, WAP, and

streaming settings.

Before you can use multimedia

messaging, e-mail, synchronization,

streaming, and the browser, you must

have the proper configuration settings in

your device. Your device may

E-mail setup — Configure a POP, IMAP, or

Mail for Exchange account.

automatically configure browser,

The settings available for editing may

multimedia messaging, access point, and

streaming settings based on the SIM card

used. If not, you can use the Settings

wizard application to configure the

settings. You may receive the settings as

a configuration message that you can save

to your device. For more information on

vary.

Your device 11

Your device

Keys and parts

Light sensor

Left selection key

Home key

Call key

Number keys

End/Power key

Clear key C

Right selection key

Navi™ key (scroll key)

12 Wrist strap eyelet

13 Nokia AV connector (2.5 mm)

14 Micro USB connector

15 Charger connector

16 Main camera lens

17 Camera flash

10 Secondary camera lens

11 Earpiece

18 Microphone

19 Loudspeaker

20 Capture key

The surface of this device is nickel-free.

Home screen

When you have switched on the device,

and it is registered to a network, the

device is in the home screen and ready for

use.

12 Your device

Display indicators

To open a list of most recently dialed

numbers, press the call key.

The device is being used in a UMTS

To use voice commands or voice dialling,

network or a GSM network (network

service). The bar next to the icon

indicates the signal strength of the

network at your current location.

The higher the bar, the stronger the

signal.

press and hold the right selection key.

To change the profile, press the power key

briefly, and select a profile.

To open a connection to the web, press

and hold 0.

High-speed downlink packet access

(HSDPA) / high-speed uplink packet

access (HSUPA) (network service) in

the UMTS network is activated.

To activate or deactivate Bluetooth

connectivity, press and hold *.

To modify the home screen, select

Settings >Settings and General >

The device is using the Offline

profile and is not connected to a

cellular network.

Personalization >Standby mode and

from the available options.

Offline profile

The battery charge level. The higher

the bar, the stronger the charge in

the battery.

To quickly activate the Offline profile,

press the power key briefly, and select

Offline.

To switch to another profile, press the

You have unread messages in the

Inbox folder in Messaging.

power key briefly, and select a profile.

When the Offline profile is active, all

connections that use radio frequencies

are closed. However, you can use your

device without the SIM card and listen to

the radio or music. Remember to switch

off your device when wireless phone use

is prohibited.

You have received new e-mail in the

remote mailbox.

There are messages waiting to be

sent in the Outbox folder in

Messaging.

Important: In the Offline profile you

cannot make or receive any calls, or use

other features that require cellular

You have missed calls.

network coverage. Calls may still be

possible to the official emergency number

programed into your device. To make

calls, you must first activate the phone

function by changing profiles. If the device

has been locked, enter the lock code.

The keys of the device are locked.

An alarm is active.

Your device 13

You have activated the Silent

The second phone line is being used

(network service).

profile, and the device does not ring

for an incoming call or message.

All calls are forwarded to another

number. If you have two phone

lines, a number indicates the active

line.

Bluetooth connectivity is activated.

A Bluetooth connection is

established. When the indicator is

blinking, your device is trying to

connect with another device.

A headset or a loopset is connected

to the device.

A handsfree car kit is connected to

the device.

A GPRS packet data connection is

available (network service).

indicates that the connection is

active. indicates that the

connection is on hold.

A text phone is connected to the

device.

Your device is synchronizing.

An EGPRS packet data connection is

available (network service).

indicates that the connection is

active. indicates that the

connection is on hold.

Other indicators may also be displayed.

Power saver

Select

>Settings >Settings.

A UMTS packet data connection is

available (network service).

indicates that the connection is

active. indicates that the

connection is on hold.

To define the screen saver settings, select

General >Personalization >Display

and from the following:

Power saver time-out — Set the length

of time that the device is inactive before

the power saver is activated.

HSDPA/HSUPA is supported and

available (network service). The

icon may vary between regions.

indicates that the connection is

active. indicates that the

connection is on hold.

Light time-out — Set the length of time

that the device is inactive before the

screen is dimmed.

Press

Your device is connected to a

In the menu, you can access the functions

computer with a USB data cable.

in your device.

To open an application or a folder, select

the item.

14 Your device

If you change the order of the functions in To set the device to lock the keypad when

the menu, the order may differ from the

you close the slide, select Slide

default order described in this user guide. handling >Keyguard activation.

To change the menu view, select

To set the device to automatically lock the

keypad after a certain length of time,

select Security >Phone and SIM card >

Keypad autolock period >User

Options >Change Menu view.

To close an application or a folder, select

Options >Exit.

defined, and select the desired time.

To display and switch between open

applications, press and hold the home

key, and select an application.

When the device or keypad is locked, calls

may be possible to the official emergency

number programmed into your device.

Leaving applications running in the

background increases the demand on

battery power and reduces the battery

life.

Access codes

Select

>Settings >Settings.

To define how your device uses the access

codes and security settings, select

General >Security >Phone and SIM

card and from the following:

Volume control

To adjust the volume when listening to an

audio file, scroll up or down.

•

The PIN code, supplied with the SIM

card, helps to protect the card against

unauthorised use.

To adjust the volume during a call, scroll

left or right.

The PIN2 code, supplied with some

SIM cards, is required to access certain

services.

To activate or deactivate the loudspeaker

during a call, select Loudsp. or Handset.

Warning:

PUK and PUK2 codes may be supplied

with the SIM card. If you enter the PIN

code incorrectly three times in

Continuous exposure to high volume may

damage your hearing. Listen to music at a

moderate level, and do not hold the device

near your ear when the loudspeaker is in

use.

succession, you are asked for the PUK

code. If the codes are not supplied,

contact your service provider.

•

The security code helps to protect

your phone against unauthorized use.

You can create and change the code,

and set the phone to request the code.

Keep the code secret and in a safe

place separate from your phone. If

you forget the code and your phone is

locked, your phone will require

service and additional charges may

apply. For more information, contact

your service provider.

Keypad lock (keyguard)

To unlock the keypad, open the slide, or

select Unlock, then quickly select OK.

Select

>Settings >Settings and

General.

Your device 15

•

The barring password is required

when using the call barring service to

restrict calls to and from your phone

(network service).

Remote lock

You can lock your device from another

device using a text message. To enable

your device to be locked remotely, and to

define the lock message to be used, select

>Settings >Settings >General >

Security and Phone and SIM card >

Remote phone locking. When you have

entered the message, select OK. The

message can be up to 20 characters long.

Connect a USB data cable

Connect a compatible USB data cable to

the USB connector.

To lock your device, send the lock message

as a text message to your mobile phone

number. To unlock your device later,

select Unlock, and enter the lock code.

Installations

Select

>Applications >

Installations.

To select the default USB connection mode

You can find additional applications and

or change the active mode, select

download applications into this folder.

Settings and Connectivity >USB >USB

connection mode, and select the desired

mode.

To select whether the default mode is

activated automatically, select Ask on

connection.

Important: Only install and use

applications and other software from

trusted sources, such as applications that

are Symbian Signed or have passed the

Java Verified™ testing.

Connect a compatible headset

Wrist strap

Do not connect products that create an

output signal as this may cause damage

to the device. Do not connect any voltage

source to the Nokia AV Connector.

Thread the wrist strap, and tighten it.

When connecting any external device or

any headset, other than those approved

by Nokia for use with this device, to the

Nokia AV Connector, pay special attention

to volume levels.

16 Call functions

Call functions

1-touch dialing

Select

>Settings >Settings and

Voice calls

Phone >Call >1-touch dialing.

1-touch dialing allows you to make a call

by pressing and holding a number key

when in the home screen.

Make a call

To make a call, enter the phone number,

including the area code, and press the call

key.

To activate 1-touch dialing, select On.

Tip: For international calls, add the +

character that replaces the international

access code, and enter the country code,

area code (omit the leading 0, if

To assign a number key to a phone

number, select

>Settings >1-

touch.

necessary) and phone number. The +

character as a replacement for the

international access code may not work in

all regions. In this case, enter the

Scroll to the number key (2 - 9) on the

display, and select Options >Assign.

international access code directly.

Select the desired number from the

contacts list.

To end the call or cancel the call attempt,

press the end key.

To delete the phone number assigned to

a number key, scroll to the 1-touch dialing

key, and select Options >Remove.

To make a call using the saved contacts,

open the contacts. Enter the first letters of

the name, scroll to the name and press the

call key.

To modify a phone number assigned to a

number key, scroll to the 1-touch dialing

key, and select Options >Change.

To make a call using the log, press the call

key to view up to 20 numbers that you last

called or attempted to call. Scroll to the

desired number or name and press the call

key.

Voice mail

Select

>Settings >Call mailbox.

When you open the Voice mail application

for the first time, you are asked to enter

the number of your voice mailbox.

To adjust the volume of an active call,

scroll right or left.

To call your voice mailbox, scroll to Voice

mailbox, and select Options >Call voice

mailbox.

To switch from a voice call to a video call,

select Options >Switch to video call.

The device ends the voice call and makes

a video call to the recipient.

To call your mailbox in the home screen,

press and hold 1; or press 1 and then the

call key. Select the mailbox you want to

call.

Call functions 17

To change the mailbox number, select the To discuss privately with a conference call

mailbox and Options >Change

participant, scroll to the participant and

number.

select Options >Conference >Private.

Voice dialing

Answer a call

Make a phone call by saying the name that

To answer a call, press the call key, or open

the slide.

is saved in the contacts list.

Note: Using voice tags may be difficult in

a noisy environment or during an

To set the device to answer a call when

emergency, so you should not rely solely

upon voice dialing in all circumstances.

you open the slide, select

Settings >Settings and General >Slide

handling.

In the home screen, press and hold

the right selection key.A short tone

sounds, and Speak now is displayed.

To decline a call, press the end key.

Say the name of the contact you want To mute the ringing tone instead of

to dial. If the voice recognition is

successful, a list of proposed matches

is displayed. The phone plays the

voice command of the first match on

the list. If it is not the correct

answering a call, select Silence.

When you have an active call and the call

waiting function (network service) is

activated, press the call key to answer a

new incoming call. The first call is put on

hold. To end the active call, press the end

key.

command, scroll to another entry.

Make a conference call

To make a conference call, enter a

participant's phone number and press

the call key.

Call and data registers

Select

>Log.

When the participant answers, select

Options >New call.

To view recently missed, received, and

When you have made a phone call to

all the participants, select Options >

Conference to merge the calls into a

conference call.

dialed calls, select Recent calls.

Tip: To view the dialed numbers when in

the home screen, press the call key.

To mute the microphone of your device

To view the approximate duration of calls

to and from your device, select Call

timers.

during the call, select Options >Mute.

To drop a participant from the conference

call, scroll to the participant and select

Options >Conference >Drop

participant.

18 Call functions

To view the amount of data transferred

during packet data connections, select

Packet data.

To end the video call and make a new

voice call to the same recipient, select

Options >Switch to voice call.

Video calls

Answer or reject a video call

When a video call arrives,

is displayed.

Make a video call

To answer the video call, press the call

key.

To make a video call, enter the phone

number or select the recipient from the

contacts list and Options >Call >Video

call. When the video call starts, the

To start sending live video image,

select Yes.

camera of the device is activated. If the

camera is already in use, video sending is

disabled. If the recipient of the call does

not want to send video back to you, a still

image is shown instead. To define the still

image sent from your device instead of

If you do not activate the video sending,

you only hear the voice of the caller. A grey

screen replaces your own video image. To

enable the video sending, select

Options >Enable >Sending video.

To replace the grey screen with a still

image captured by the camera in your

video, select

>Settings >Settings

and Phone >Call >Image in video

device, select

>Settings and

call.

Telephony >Call >Image in video

call.

To disable the sending of audio, video, or

video and audio, select Options >

Disable >Sending audio, Sending

video, or Sending aud. & video.

If you do not want to answer a video call,

press the end key.

To adjust the volume of an active video

call, scroll right or left.

Call settings

Select

>Settings >Settings and

To use the loudspeaker, select Options >

Activate loudspeaker. To mute the

loudspeaker and use the earpiece, select

Options >Activate handset.

Phone >Call.

Select from the following:

Send my caller ID — Display your phone

To swap the places of images, select

number to the person you are calling.

Options >Swap images.

Call waiting — Set the device to notify

you of incoming calls while you are in a

call (network service).

To zoom the image on the display, select

Options >Zoom and scroll up or down.

Decline call with msg. — Send a text

message when you reject a call, informing

the caller why you could not answer the

call.

Call functions 19

Call forward

Message text — Write the standard text

message that is sent when you reject a

call.

Select

>Settings >Settings and

Phone >Call forwarding.

Forward incoming calls to your voice

mailbox or to another phone number. For

details, contact your service provider.

Ownvideo in recvd. call — Allow or deny

video sending during a video call from

your device.

Image in video call — If video is not sent

during a video call, you can select a still

image to be displayed instead.

Selectthe type of callsto forward andfrom

the following options:

Automatic redial — Set your device to

make a maximum of 10 attempts to

connect the call after an unsuccessful call

attempt. To stop automatic redialing,

press the end key.

All voice calls, All data and video calls

or All fax calls — Forward all incoming

voice, data, video or fax calls. You cannot

answer the calls, only forward the calls to

another number.

Show call duration — Display the length

If busy — Forward incoming calls if you

of a call during a call.

have an active call.

Summary after call — Display the length

If not answered — Forward incoming

calls after your device rings for a specified

period of time. Select the length of time

for the device to ring before forwarding

the call.

of a call after a call.

1-touch dialing — Activate 1-touch

dialing.

Anykey answer — Activate anykey

If out of reach — Forward calls when the

device is switched off or out of network

coverage.

answer.

Line in use — This setting (network

service) is available only if the SIM card

supports two subscriber numbers, that is,

two phone lines. Select which phone line

you want to use to make calls or send text

messages. Calls on both lines can be

answered irrespective of the selected line.

If you select Line 2 and have not

If not available — Forward calls if you

have an active call, do not answer, or the

device is switched off or out of network

coverage.

To forward calls to your voice mailbox,

select a call type, a forwarding option, and

Options >Activate >To voice

mailbox.

subscribed to this network service, you

are not able to make calls. When line 2 is

selected, is displayed in the home

screen.

To forward calls to your voice mailbox,

select a call type, a forwarding option, and

Options >Activate >To other

number. Enter the number, or select

Find to retrieve a number saved in

Contacts.

Line change — Prevent phone line

selection (network service), if supported

by your SIM card. To change this setting,

you need the PIN2 code.

Contact search — Activate contact search

in the home screen.

20 Call functions

To check the current forwarding status,

To change the password used for

scroll to the forwarding option, and select restricting voice, fax, and data calls, select

Options >Check status.

Options >Edit restriction passwd..

Enter the current code, then the new code

twice. The restriction password must be

four digits long. For details, contact your

service provider.

To stop forwarding calls, scroll to the

forwarding option, and select Options >

Deactivate.

Network settings

Call restrictions

Select

>Settings >Settings and

Select

>Settings >Settings and

Phone >Network.

Phone >Call restriction.

You can restrict the calls that can be made

or received with the device (network

service). To modify the settings, you need

the restriction password from your service

provider. Call restriction affects all call

types.

To select the network mode, select

Network mode and Dual mode, UMTS,

or GSM. In dual mode, the device switches

automatically between networks.

Tip: Selecting UMTS enables faster data

transfer, but may increase the demand on

battery power and reduce the battery life.

In regions close to both GSM and UMTS

networks, selecting Dual mode may

cause constant jumping between the two

networks, which also increases the

demand on battery power.

Select from the following voice call

restriction settings:

Outgoing calls — Prevent making voice

calls with your device.

Incoming calls — Prevent incoming calls.

International calls — Prevent calling to

foreign countries or regions.

To select the operator, select Operator

selection and Manual to select from

available networks, or Automatic to set

the device to select the network

automatically.

Incoming calls if roaming — Prevent

incoming calls when outside your home

country.

International calls except to home

country — Prevent calls to foreign

countries or regions, but allow calls to

your home country.

To set the device to indicate when it is

used in a microcellular network (MCN),

select Cell info display >On.

To check the status of voice call

restrictions, select the restriction option

and Options >Check status.

To deactivate all voice call restrictions,

select a restriction option and Options >

Deact. all restrictions.

Personalization 21

You can adjust and customize the ringing

tones, alert tones, and other device tones

for different events, environments, or

caller groups. The active profile is shown

at the top of the display in the home

screen. However, if the active profile is

General, only today's date is shown.

Personalization

Themes

Change the display theme

Select

>Settings >Themes.

Select from the following:

General — Change the theme used in all

To create a new profile, select Options >

applications.

Create new, and define the settings.

Menu view — Change the theme used in

the main menu.

To customize a profile, select a profile and

Standby — Change the theme used in the

Options >Customize.

home screen.

To change a profile, select a profile and

Options >Activate.The Offline profile

prevents your device from accidentally

switching on, sending or receiving

messages, or using Bluetooth connectivity

or FM radio; it also closes any internet

connection that may be in operation

when the profile is selected. The Offline

profile does not prevent you from

establishing a Bluetooth connection at a

later time, or from restarting the FM radio,

so comply with any applicable safety

requirements when establishing and

using these features.

Wallpaper — Change the background

image in the home screen.

Call image — Change the image

displayed during calls.

To activate or deactivate the theme

effects, select General >Options >

Theme effects.

Download a theme

Select

>Settings >Themes.

To download a theme, select General >

Download themes >Options >Go

to >New web page. Enter the Web

address from which you want to

download your theme. Once the theme is

downloaded, you can preview or activate

the theme.

To set the profile to be active until a

certain time within the next 24 hours,

scroll to the profile, select Options >

Timed, and set the time. When the time

expires, the profile changes back to the

previously active non-timed profile. When

To preview a theme, select Options >

the profile is timed,

is displayed in the

Preview.

home screen. The Offline profile cannot be

timed.

To activate a theme, select Options >

Set.

To delete a profile that you created, select

Options >Delete profile. You cannot

delete the predefined profiles.

Profiles

Select

>Settings >Profiles.

22 Camera

Camera

Press the capture key. Do not move

the device before the image is saved

and the final image displayed.

Your device has two cameras to capture

still images and record videos. A high

resolution main camera is on the back of

the device using landscape mode, and

lower resolution secondary camera is on

the front of the device using portrait

mode. To activate the secondary camera

when the main camera is activated, select

Options >Use secondary camera.

Capture images with the secondary

camera

Select Options >Use secondary

camera.

To capture an image, select Capture.

Do not move the device before the

image is saved and the final image

displayed.

Capture an image

Zoom in or out when capturing an

When capturing an image, note the

image

following:

Use the zoom keys.

•

Use both hands to keep the camera

steady.

Leave the camera open in the

background and use other

applications

The quality of a digitally zoomed

image is lower than that of a non-

zoomed image.

Press the menu key. To return to the

camera, press and hold the capture key.

•

The camera goes into battery saving

mode after about a minute of

inactivity.

Panorama mode

Keep a safe distance when using the

flash. Do not use the flash on people

or animals at closerange. Do not cover

the flash while taking a picture.

Select

>Camera.

Select panorama mode

from the

toolbar.

To switch from video mode to image

To capture the first image in the

mode, if necessary, select

panorama, press the capture key.

To lock the focus on an object, press

the capture key halfway down (not

available in landscape or sport scene

modes). A green locked focus

Slowly turn the device left or right as

shown by the arrows.

A panorama preview is displayed and

the camera captures the image as you

turn. The green arrow indicates that

you can slowly proceed to turn. The

red pause mark indicates that you

should stop moving until the green

arrow is displayed again. You can

predict when the next key frame is

captured when the red rectangle

indicator is displayed. If the focus was

not locked, a yellow focus indicator is

displayed. Release the capture key,

and press it halfway down again. You

can also capture an image without

locking the focus.

Gallery 23

moves to the center of the preview

area.

Gallery

To complete the capture, select Stop.

The panoramic capture stops

Select

>Gallery.

Use Gallery to access different types of

media, such as images and videos, music,

sound clips, streaming links and

automatically when the maximum

image width has been reached. Note

that it may take some time for the

device to process the captured image.

presentations. All viewed images and

videos, and received music and sound

clips are automatically saved to Gallery.

Sound clips and music are played in the

Music player, streaming links by the Video

center. Images are viewed and videos are

played with the Photos application.

Received video clips

To switch from image mode to video

mode, if necessary, select image

mode from the active toolbar.

To pause recording, select Pause. To

resume, select Continue. If you pause

recording and do not press any key

within one minute, the recording

stops.

About Gallery

Select

>Gallery >Images & videos

and from the following:

To zoom in or out, use the zoom keys.

Captured — View all the images and

video clips you have captured.

To stop recording, press the capture

key. The video clip is automatically

saved in Photos.

Months — View images and video clips

categorised by the month they were

captured.

Albums — View the default albums and

the ones you have created.

Tags — View the tags you have created

for each item.

Downloads — View items and video clips

downloaded from the web or received as

a multimedia or e-mail message.

Share online — Post your images to the

web.

Files stored on your compatible memory

card (if inserted) are indicated with

To copy or move files to another memory

location, select a file, Options >Move

and copy, and the appropriate option.

24 Contacts

Contacts

To edit contacts, select a contact and

Options >Edit.

Select

>Contacts.

Ringing tones, images, and call text for

contacts

In Contacts, you can save and update

contact information, such as phone

numbers, home addresses or e-mail

addresses of your contacts. You can add a

personal ringing tone or a thumbnail

image to a contact card. You can also

create contact groups, which allow you to

send e-mail or text messages to many

recipients at the same time.

You can define a ringing tone for a contact

or group, and an image and a call text for

a contact. When the contact calls you, the

device plays the selected ringing tone and

shows the call text or image (if the caller’s

phone number is sent with the call and

your device recognises it).

To add a ringing tone for a contact or a

contact group, select the contact or

contact group and Options >Ringing

tone, and the ringing tone.

For more information on Contacts and SIM

contacts, see the extended user guide on

the product support pages at

www.nokia.com/support.

To define a call text for a contact, select

the contact and Options >Add text for

call. Enter the call text, and select OK.

Manage names and numbers

To delete a contact card, select a card, and

press C.

To add an image for a contact saved in the

device memory, select the contact,

Options >Add image, and an image

from Gallery.

To delete several contact cards at the

same time, select Options >Mark/

Unmark to mark the desired contact

cards, and press C to delete.

To remove the ringing tone, select

Default tone from the list of ringing

tones.

To send contact information, select a card,

Options >Send business card, and the

desired option.

To view, change or remove the image

from a contact, select the contact,

Options >Image, and the desired

option.

To listen to the voice tag assigned to the

contact, select a contact card and

Options >Voice tag details >

Options >Play voice tag.

Copy contacts

Save and edit names and numbers

When you open the contacts list for the

first time, the device asks if you want to

copy names and numbers from the SIM

card to your device.

To add a new contact to the contacts

list, select Options >New contact.

Fill in the fields that you want, and

select Done.

Write text 25

Write text

To start copying, select OK.

Traditional text input

If you do not want to copy the contacts

from the SIM card to your device, select

Cancel. The device asks if you want to

view the SIM card contacts in the contacts

directory. To view the contacts, select

OK. The contacts list opens, and the names

stored on your SIM card are indicated with

indicates traditional text input.

and

indicate the uppercase

indicates the

and lowercase.

sentence case, that is, the first letter of the

sentence is written in uppercase and all

the other letters are automatically written

in lowercase.

mode.

indicates number

Stay connected with your online

friends

To write text with the keypad, press a

number key, 2-9, repeatedly until the

desired character is displayed. There are

more characters available for a number

key than are printed on the key. If the next

letter is located on the same key as the

present one, wait until the cursor is

displayed, and enter the letter.

You can synchronize the contact

information on your device with contacts

you have on social networking services.

When you allow synchronization, you are

able to view your contacts' profile

information, such as their picture and

status updates, in the Contacts application

on your device.

To insert a number, press and hold the

number key.

Synchronizing your contacts and

retrieving status updates are network

services. Roaming and data transfer

charges may apply. If the social

To switch between the different character

cases and modes, press #.

networking service is not available or

functioning correctly, you may not be able

to synchronize or retrieve status updates.

To erase a character, press the clear key.

Press and hold the clear key to erase more

than one character.

To start synchronizing your contacts, go to

the settings of the social networking

application on your device, select an

access point and set the frequency of the

automatic synchronization.

To enter the most common punctuation

marks, press 1 repeatedly until the

desired punctuation mark is displayed.

To add special characters, press and hold

To deactivate the connection between

Contacts and the social networking

service, in the settings of the social

networking service application on your

device, clear the Enable check box.

To insert a space, press 0. To insert a line

break, press 0 three times.

This feature may not be available in

certain regions.

26 Write text

Predictive text input

writing language. To change the writing

language, select Options >Input

options >Writing language, and a

writing language that uses Latin

characters.

To activate or deactivate predictive

text input, press # twice quickly. This

activates or deactivates predictive

text input for all editors in the device.

indicates that predictive text

Copy and delete text

input is activated.

To select letters and words, press and

hold #, and at the same time scroll left

or right. To select lines of text, press

and hold #, and at the same time

scroll up or down.

To write the desired word, press the

keys 2-9. Press each key once for each

letter.

When you have finished writing the

word, and it is correct, scroll right to

confirm it, or press 0 to add a space.

To copy the text, press and hold #, and

at the same time select Copy.

If the word is not correct, press *

repeatedly to view the matching

words in the dictionary.

To delete the selected text, press the

clear key C.

To paste the text, scroll to the desired

location, press and hold #, and at the

same time select Paste.

If the ? character is displayed after the

word, the word you intended to write

is not in the dictionary. To add a word

to the dictionary, select Spell, enter

the word (up to 32 letters) using

traditional text input, and select OK.

The word is added to the dictionary.

When the dictionary is full, the new

word replaces the oldest added word.

Write the first part of a compound word;

to confirm it, scroll right. Write the second

part of the compound word. To complete

the compound word, press 0 to add a

space.

Change the writing language

When you are writing text, youcanchange

the writing language. For example, if you

press the 6 key repeatedly to reach a

specific character, changing the writing

language gives you access to characters in

a different order.

If you are writing text using a non-Latin

alphabet and want to write Latin

characters, for example e-mail or web

addresses, you may need to change the

Messaging 27

Only devices that have compatible

Messaging

features can receive and display

multimedia messages. The appearance of

a message may vary depending on the

receiving device.

Select

>Messaging.

In Messaging (network service), you can

send and receive text, multimedia, audio,

and e-mail messages. You can also receive

web service messages, cell broadcast

messages, and special messages

containing data, and send service

commands.

The available messaging types may vary.

For more information, contact your

service provider.

Write and send messages

Select

>Messaging.

Important: Exercise caution when

opening messages. Messages may contain

malicious software or otherwise be

harmful to your device or PC.

Before you can create a multimedia

message or write an e-mail, you must

have the correct connection settings in

place.

Before sending or receiving messages,

you may need to do the following:

•

Insert a valid SIM card in the device

and be located in the service area of a

cellular network.

The wireless network may limit the size of

MMS messages. If the inserted picture

exceeds this limit, the device may make it

smaller so that it can be sent by MMS.

Verify that the network supports the

messaging features you want to use

and that they are activated on your

SIM card.

Check the size limit of e-mail messages

with your service provider. If you attempt

to send an e-mail message that exceeds

the size limit of the e-mail server, the

message is left in the Outbox folder, and

the device will attempt to resend it

periodically. Sending an e-mail requires a

data connection, and continuous

•

Define the internet access point

settings on the device.

Define the e-mail account settings on

the device.

Define the text message settings on

the device.

attempts to resend the e-mail may

increase your data transfer costs. In the

Outbox folder, you can delete such a

message, or move it to the Drafts folder.

Define the multimedia message

settings on the device.

The device may recognize the SIM card

provider and automatically configure

some of the message settings. If not, you

may need to define the settings manually;

or contact your service provider to

configure the settings.

Select New message >Message to

send a text or multimedia message

(MMS), Audio message to send a

multimedia message that includes

one sound clip, or E-mail to send an

e-mail message.

The appearance of a picture message may

In the To field, press the scroll key to

select recipients or groups from the

vary depending on the receiving device.

28 Messaging

contacts list, or enter the recipient’s

phone number or e-mail address. To

accents, other marks, or some language

options take more space, and limit the

add a semicolon (;) that separates the number of characters that can be sent in

recipients, press *. You can also copy

and paste the number or address from

the clipboard.

a single message.

You may not be able to send video clips

that are saved in the MP4 file format or

that exceed the size limit of the wireless

network in a multimedia message.

In the subject field, enter the subject

of the e-mail. To change the fields that

are visible, select Options >Message

header fields.

E-mail

In the message field, write the

Set up your e-mail

message. To insert a template or note,

select Options >Insert content >

Insert text >Template or Note.

With the E-mail wizard, you can set up

your corporate e-mail account, such as

Microsoft Outlook or Mail for Exchange,

and your internet e-mail account.

To add a media file to a multimedia

message, select Options >Insert

content, the file type or source, and

the desired file. To insert a business

card, slide, note, or some other file to

the message, select Options >Insert

content >Insert other.

When setting up your corporate e-mail,

you may be prompted for the name of the

server associated with your e-mail

address. For details, contact your

company IT department.

To capture an image or record a video

or sound clip for a multimedia

message, select Options >Insert

content >Insert image >New,

Insert video clip >New, or Insert

sound clip >New.

To open the wizard, in the home

screen, select Set up e-mail.

Enter your e-mail address and

password. If the wizard is not able to

configure your e-mail settings

automatically, you need to select your

e-mail account type, and enter the

related account settings.

To add an attachment to an e-mail,

select Options and the attachment

type. E-mail attachments are

indicated by

If your device contains any additional e-

mail clients, those are offered to you when

you open the wizard.

To send the message, select

Options >Send, or press the call key.

Note: The message sent icon or text on

your device screen does not indicate that

the message is received at the intended

destination.

Your device supports text messages

beyond the limit for a single message.

Longer messages are sent as two or more

messages. Your service provider may

charge accordingly. Characters with

ActiveSync

Use of the Mail for Exchange is limited to

over-the-air synchronization of PIM

information between the Nokia device

and the authorized Microsoft Exchange

server.

Send e-mail

Select

>Messaging.

Messaging 29

Select your mailbox and Options >

To add an attachment to the e-mail

Create email.

message, select Options >Add

attachment.

In the To field, enter the recipient's e-

mail address. If the recipient's e-mail

address can be found in Contacts, start To remove the selected attachment, select

entering the recipient's name, and

select the recipient from the proposed

matches. If you add several recipients,

insert ; to separate the e-mail

Options >Remove attachment.

Read e-mail

addresses. Use the Cc field to send a

copy to other recipients, or the Bcc

field to send a blind copy to recipients.

If the Bcc field is not visible, select

Options >More >Show Bcc field.

Select

>Messaging.

Important: Exercise caution when

opening messages. Messages may contain

malicious software or otherwise be

harmful to your device or PC.

In the Subject field, enter the subject

of the e-mail.

To read a received e-mail message, select

the mailbox, and select the message from

the list.

Enter your message in the text area.

Select Options and from the

following:

To reply to the message sender, select

Options >Reply. To reply to the sender

and all other recipients, select Options >

Reply to all.

Add attachment — Add an

attachment to the message.

Priority — Set the priority of the

message.

To forward the message, select

Flag — Flag the message for follow-

Options >Forward.

up.

Insert template — Insert text from

a template.

Download attachments

Add recipient — Add recipients to

Select

>Messagingand a mailbox.

the message from Contacts.

To view the attachments in a received e-

mail message, scroll to the attachment

field, and select Options >Actions. If

there is one attachment in the message,

select Open to open the attachment. If

there are several attachments, select

View list to see a list showing which

attachments have been downloaded.

Editing options — Cut, copy, or paste

the selected text.

Writing language: — Select the

writing language.

Select Options >Send.

Add attachments

Select

>Messaging.

To download the selected attachment or

all the attachments from the list to your

device, select Options >Actions >

Download or Download all. The

To write an e-mail message, select your

mailbox and Options >Create email.

30 Messaging

attachments are not saved in your device,

and are deleted when you delete the

message.

To delete the selected e-mail message,

select Options >Actions >Delete. The

message is placed in the Deleted items

folder, if available.

To save the selected attachment or all the

downloaded attachments in your device,

select Options >Actions >Save or Save

all.

To empty the Deleted items folder, select

the folder and Options >Empty deleted

items.

To open the selected, downloaded

attachment, select Options >Actions >

Open.

Switch between e-mail folders

Select

>Messagingand a mailbox.

To open another e-mail folder or mailbox,

select Inbox at the top of the display.

Select the e-mail folder or mailbox from

the list.

Reply to a meeting request

Select

>Messagingand a mailbox.

Select a received meeting request,

Options, and from the following:

Disconnect from the mailbox

Accept — Accept the meeting request.

Select

>Messagingand a mailbox.

Decline — Decline the meeting request.

Forward — Forward the meeting request

To cancel the synchronization between

the device and the e-mail server, and to

work with e-mail without a wireless

connection, select Options >

to another recipient.

Remove from calendar — Remove a

canceled meeting from your calendar.

Disconnect. If your mailboxdoesnothave

the Disconnect option, select Options >

Exit to disconnect from the mailbox.

Search for e-mail messages

Select

>Messagingand a mailbox.

To search for items within the recipients,

subjects, and body texts of the e-mail

messages in the mailbox, select

Options >Search.

To start the synchronization again, select

Options >Connect.

Set an out-of-office reply

To stop the search, select Options >Stop

Select

>Messaging.

search.

To set an out-of-office reply, if available,

select your mailbox andOptions >

Settings >Mailbox >Out of office >

On or Options >Settings >Mailbox

settings >Out of office >On.

To start a new search, select Options >

New search.

Delete e-mails

Select

>Messagingand a mailbox.

Internet 31

Internet

To enter the text for the reply, select Out

of office reply.

With your device, you can browse both the

internet and your company's intranet, and

download and install new applications to

your device.

General e-mail settings

Select

>Messaging.

Select a mailbox, Options >Settings >

Web browser

Global settings, and from the following:

With the Web browser application, you

can view hypertext markup language

(HTML) web pages on the internet as

originally designed. You can also browse

Message list layout — Select whether

the e-mail messages in Inbox display one

or two lines of text.

Body text preview — Select whether to web pages that are designed specifically

preview messages when scrolling

through the list of e-mail messages in

Inbox.

for mobile devices, and use extensible

hypertext markup language (XHTML), or

the wireless markup language (WML).

To browse the web, you need to have an

internet access point configured in your

device.

Title dividers — Select On to be able to

expand and collapse the list of e-mail

messages.

Download notifications — Display a

notification when an e-mail attachment

has been downloaded.

Browse the web

Select

>Web.

Shortcut: To start the browser, press and

hold 0 in the home screen.

To browse the web, in the bookmarks

view, select a bookmark, or start to enter

a web address (the

field opens

automatically), and select Go to.

Some web pages may contain material,

such as graphics and sounds, that requires

a large amount of memory to view. If your

device runs out of memory while loading

such a web page, the graphics on the page

are not shown.

To browse web pages with graphics

disabled, to save memory and increase

the page loading speed, select Options >

32 Internet

Settings >Page >Load content >Text The browser application automatically

only.

detects if a web page contains web feeds.

To enter a web address, select Options > If web feeds are available, to subscribe to

Go to >New web page.

a web feed, select Options >Subscribe

to web feeds.

To refresh the content of the web page,

select Options >Web page options >

Reload.

To update a web feed, in the Web feeds

view, select a feed and Options >Web

feed options >Refresh.

To save the current web page as a

bookmark, select Options >Web page

options >Save as bookmark.

To define whether the web feeds are

updated automatically, in the Web feeds

view, select Options >Edit >Edit. This

option is not available if one or more feeds

are marked.

To view snapshots of the web pages you

have visited during the current browsing

session, select Back (available if History

list is activated in the browser settings

and the current web page is not the first

web page you visit).

Empty the cache

The information or services you have

accessed are stored in the cache memory

of the device.

To prevent or allow the automatic

opening of multiple windows, select

Options >Web page options >Block

pop-ups or Allow pop-ups.

A cache is a memory location that is used

to store data temporarily. If you have tried

to access or have accessed confidential

information requiring passwords, empty

the cache after each use.

To view the shortcut key map, select

Options >Keypad shortcuts. To edit the

shortcut keys, select Edit.

To empty the cache, select Options >

Clear privacy data >Cache.

Tip: To minimize the browser without

exiting the application or connection,

press the end key once.

End the connection

To end the connection and close the

Web feeds and blogs

browser, select Options >Exit.

Select

>Web.

To delete the information the network

server collects about your visits to various

web pages, select Options >Clear

privacy data >Cookies.

Web feeds are XML files on web pages that

are used to share, for example, the latest

news headlines or blogs. It is common to

find web feeds on web, blog, and wiki

pages.

Internet 33

Connection security

Share online

About Share online

If the security indicator ( ) is displayed

during a connection, the data

Select

>Share >Share online.

transmission between the device and the

internet gateway or server is encrypted.

With Share online, you can post images,

video clips, and sound clips from your

device to compatible online sharing

services, such as albums and blogs. You

can also view and send comments to the

posts in these services, and download

content to your compatible Nokia device.

The supported content types and the

availability of the Share online service

may vary.

The security icon does not indicate that

the data transmission between the

gateway and the content server (where

the data is stored) is secure. The service

provider secures the data transmission

between the gateway and the content

server.

Security certificates may be required for

some services, such as banking services.

You are notified if the identity of the

server is not authentic or if you do not

have the correct security certificate in

your device. For more information,

contact your service provider.

Subscribe to services

Select

>Share >Share online.

To subscribe to an online sharing service,

go to the service provider's website, and

check that your Nokia device is compatible

with the service. Create an account as

instructed on the website. You receive a

user name and password needed to set up

your device with the account.

Important: Even if the use of certificates

makes the risks involved in remote

connections and software installation

considerably smaller, they must be used

correctly in order to benefit from

increased security. The existence of a

certificate does not offer any protection

by itself; the certificate manager must

contain correct, authentic, or trusted

certificates for increased security to be

available. Certificates have a restricted

lifetime. If "Expired certificate" or

"Certificate not valid yet" is shown, even if

the certificate should be valid, check that

the current date and time in your device

are correct.

To activate a service, open the Share

online application in your device,

select a service and Options >

Activate.

Allow the device to create a network

connection. If you are prompted for

an internet access point, select one

from the list.

on the service provider’s website.

Before changing any certificate settings,

you must make sure that you really trust

the owner of the certificate and that the

certificate really belongs to the listed

owner.

Nokia's services in the online sharing

service are free of charge. Any data

transferred over the network may incur

charges from your service provider. For

the availability and cost of the third party

services and data transfer costs, contact

34 Internet

your service provider or the relevant third Using packet data access points to

party.

download videos may involve the

transmission of large amounts of data

through your service provider's network.

Contact your service provider for

information about data transmission

charges.

Create a post

Select

>Share >Share online.

To post multimedia files to a service,

select a service and Options >New

post. If the online sharing service

provides channels for posting files, select

the desired channel.

Your device may have predefined services.

Service providers may provide free

content or charge a fee. Check the pricing

in the service or from the service provider.

To add an image, video clip, or sound clip

to the post, select Options >Insert.

View and download video clips

Connect to video services

To add a title or description to the post,

enter text directly to the fields, if

available.

Select

>Applications >Video

center.

To connect to a service to install video

services, selectAdd new services and

the desired video service from the

service catalog.

To add tags to the post, select Tags:.

To select whether to enable the posting of

location information contained in the file,

select Location:.

View a video clip

To browse the content of installed video

To set the level of privacy for a file, select

Privacy:. To allow everyone to view your

file, select Public. To restrict others from

seeing your files, select Private. You can

define the Default setting on the service

provider's website.

services, select Video feeds.

The content of some video services is

divided into categories. To browse video

clips, select a category.

To search for a video clip in the service,

select Video search. Search may not be

available in all services.

To send the post to the service, select

Options >Upload.

Some video clips can be streamed over the

air, but others must be first downloaded

to your device. To download a video clip,

select Options >Download. Downloads

continue in the background if you exit the

application. The downloaded video clips

are saved in My videos.

Nokia Video Center

With Nokia Video Center (network

service), you can download and stream

video clips over the air from compatible

internet video services using a packet data

connection. You can transfer video clips

from a compatible PC to your device and

view them in Video center.

Internet 35

To stream a video clip or view a

downloaded one, select Options >Play.

Select

>Applications >Search.

When the video clip is playing, use the

selection keys and the scroll key to control

the player.

Search enables you to use various

internet-based search services to find and

connect to, for example, local services,

websites, and images. The content and

availability of the services may vary.

Warning:

Continuous exposure to high volume may

damage your hearing. Listen to music at a

moderate level, and do not hold the device

near your ear when the loudspeaker is in

use.

Select Options and from the following:

Resume download — Resume a paused

or failed download.

Cancel download — Cancel a download.

Preview — Preview a video clip. This

option is available if supported by the

service.

Feed details — View information about

a video clip.

Refresh list — Refresh the list of video

clips.

Open link in browser — Open a link in

the web browser.

Schedule downloads

To schedule an automatic download for

video clips in a service, select Options >

Schedule downloads.

Video center automatically downloads

new video clips daily at the time you

define.

To cancel scheduled downloads, select

Manual download as the download

method.

36 Time management

Time management

time of the day. Anniversary entries

are repeated every year.

Calendar

•

To-do entries remind you of a task

that has a due date but not a specific

time of the day.

About Calendar

Select

>Calendar.

With calendar, you can create and view

scheduled events and appointments, and

switch between different calendar views.

To create a calendar entry, select a date,

Options > New entry, and theentrytype.

To set the priority for meeting entries,

In the month view, calendar entries are

marked with a triangle. Anniversary

entries are also marked with an

select Options >Priority.

To define how the entry is handled during

synchronization, select Private to hide

the entry from viewers if the calendar is

available online, Public to make the entry

visible to viewers, or None to not copy the

entry to your computer.

exclamation mark. The entries of the

selected day are displayed as a list.

To open calendar entries, select a calendar

view and an entry.

To send the entry to a compatible device,

Whenever you see the icon, scroll right

to access a list of available actions. To

close the list, scroll left.

select Options >Send.

To make a meeting request from a

meeting entry, select Options >Add

participants.

Create calendar entries

Select

>Calendar.

You can create the following types of

Alarm clock

calendar entries:

Select

>Applications >Clock.

•

Meeting entries remind you of events

that have a specific date and time.

To view your active and inactive alarms,

open the alarms tab. To set a new alarm,

select Options >New alarm. Define the

repetition, if needed. When an alarm is

Meeting requests are invitations that

you can send to the participants.

Before you can create meeting

active,

is displayed.

requests you must have a compatible

mailbox configured to your device.

To turn off the sounding alarm, select

Stop. To stop the alarm for a certain time

period, select Snooze.

•

Memo entries are related to the whole

day but not to a specific time of the

day.

If your device is switched off when an

alarm is due, your device switches itself on

and starts sounding the alarm tone.

Anniversary entries remind you of

birthdays and special dates. They

refer to a certain day but not a specific

Music 37

Tip: To define the time period after which

the alarm sounds again when you set it to

snooze, select Options >Settings >

Alarm snooze time.

Music

You can listen to music also when the

offline profile is activated. See "Offline

profile," p. 12.

To cancel an alarm, select Options >

Remove alarm.

Music player

Play a song

To change the time, date, and clock type

Select

>Applications >Music

settings, select Options >Settings.

player.

To add all available songs to the music

library, select Options >Refresh

library.

Clock settings

Select Options >Settings.

To change the time or date, select Time or

To playa song, select the desiredcategory,

and the song.

Date.

To change the clock shown on the home

screen, select Clock type >Analog or

Digital.

To pause playback, press the scroll key; to

resume, press the scroll key again.

To fast-forward or rewind, press and hold

the scroll key to the right or left.

To allow the mobile phone network to

update the time, date and time zone

information to your device (network

service), select Automatic time

update >On.

To skip to the next item, scroll right. To

return to the beginning of the item, scroll

left. To skip to the previous item, scroll left

again within 2 seconds after a song or

podcast has started.

To change the alarm tone, select Clock

alarm tone.

To modify the tone of the music playback,

select Options >Equalizer.

To modify the balance and stereo image,

or to enhance the bass, select Options >

Settings.

To return to the home screen and leave

the player playing in the background,

press the end key briefly.

38 Music

Activate loudspeaker — Listen to the

Warning:

radio using the loudspeaker.

Continuous exposure to high volume may

damage your hearing. Listen to music at a

moderate level, and do not hold the device

near your ear when the loudspeaker is in

use.

Play in background — Return to the

home screen while listening to the FM

radio in the background.

FM Radio

Listen to the radio

Select

>Applications >Radio.

The quality of the radio broadcast

depends on the coverage of the radio

station in that particular area.

You can make a call or answer an incoming

call while listening to the radio. The radio

is muted when there is an active call.

To start a station search, press and hold

the scroll key to the left or right.

If you have saved radio stations in your

device, to go to the next or previous saved

station, briefly press the scroll key to the

left or right.

To adjust the volume, scroll up or down.

Select Options and from the following:

Save station — Save the station to which

you are currently tuned to your station

list.

Stations — Open the list of your saved

stations.

Station directory — View available

stations based on location (network

service).

Manual tuning — Change the frequency

manually.

Settings 39

Alphanumeric (uppercase and lowercase)

characters can be used. The device notifies

you if the lock code is not properly

formatted.

Settings

Application settings

Select

>Settings >Settings and

Applications.

Common accessory settings

Select an application from the list to

Select

>Settings >Settings and

adjust its settings.

General >Enhancement.

With most accessories, you can do the

Device and SIM card security

following:

Select

>Settings >Settings >

General >Security.

To define which profile is activated when

you attach an accessory to your device,

select the accessory and Default profile.

To change the PIN code, select Phone and

SIM card >PIN code. The new code must

be 4 to 8 digits long. The PIN code protects

your SIM card against unauthorized use

and is provided with the SIM card. After

three consecutive incorrect PIN code

entries, the code is blocked, and you need

to use the PUK code to unblock it before

you can use the SIM card again.

To set the device to answer phone calls

automatically after 5 seconds when an

accessory is attached, select Automatic

answer >On. If the ringing type is set to

Beep once or Silent in the selected

profile, automatic answering is disabled.

To set the keypad to lock automatically

after a defined period, select Phone and

SIM card >Keypad autolock period.

To illuminate the device while it is

attached to an accessory, select Lights >

On.

To set a time-out period after which the

device is automatically locked and can be

used only if the correct lock code is

entered, select Phone and SIM card >

Phone autolock period. Enter the length

of the time-out period in minutes, or

select None to deactiveate the autolock

feature. When the device is locked, you

can still answer incoming calls and calls

may still be possible to the official

emergency number programed into your

device.

Restore original settings

To restore the original device settings,

select

>Settings >Settings and

General >Factory settings. To do this,

you need your device lock code. After

resetting, the device may take a longer

time to power on. Documents, contact

information, calendar entries, and files

are unaffected.

To change the pin code, select Phone and

SIM card >Lock code. The default lock

code is 12345. Enter the current code and

then the new code twice. The new code

must be 4-255 characters long.

40 Data management

Data management

backup copy of the removed software

package. To restore the original

application, remove the application,

and install the application again from

the original installation file or the

backup copy.

Install or remove applications

Install applications

Select

>Settings >Data mgr. >

App. mgr..

The JAR file is required for installing

Java applications. If it is missing, the

device may ask you to download it. If

there is no access point defined for

the application, you are asked to

select one. When you are

You can transfer installation files to your

device from a compatible computer,

download them during browsing, or

receive them in a multimedia message, as

an e-mail attachment, or using other

connectivity methods, such as Bluetooth

connectivity. You can use Nokia

downloading the JAR file, you may

need to enter a user name and

password to access the server. You

obtain these from the supplier or

manufacturer of the application.

Application Installer in Nokia Ovi Suite to

install an application to your device.

Icons in Application manager indicate the

following:

To install software or an application, do

the following:

SIS or SISX application

Java™ application

To locate an installation file, select

>Settings >Data mgr. >App.

mgr.. Alternatively, search for

installation files using File manager,

or select Messaging >Inbox, and

open a message that contains an

installation file.

Important: Only install and use

applications and other software from

trusted sources, such as applications that

are Symbian Signed or have passed the

Java Verified testing.

In Application manager, select

Options >Install. In other

Before installation, note the following:

applications, to start the installation,

select the installation file.

•

To view the application type, version

number, and the supplier or

During installation, the device

manufacturer of the application,

select Options >View details.

displays information about the

progress of the installation. If you

install an application without a digital

signature or certification, the device

displays a warning. Continue

To display the security certificate

details of the application, select

Details: >Certificates: >View

details.

installation only if you are sure of the

origin and contents of the application.

•

If you install a file that contains an

update or repair to an existing

application, you can only restore the

original application if you have the

original installation file or a full

Data management 41

If another software package depends on

the software package that you removed,

the other software package may stop

working. For more information, see the

documentation of the installed software

package.

To start an installed application, locate

the application in the menu, and select the

application.

To see which software packages are

installed or removed and when, select

Options >View log.

File manager

About File manager

Important: Your device can only support

one antivirus application. Having more

than one application with antivirus

functionality could affect performance

and operation or cause the device to stop

functioning.

Select

>Applications >File mgr..

With File manager, you can browse,

manage, and open files.

The available options may vary.

After you install applications to a

compatible memory card, installation files

(.sis, .sisx) remain in the device memory.

The files may use large amounts of

memory and prevent you from storing

other files. To maintain sufficient

memory, use Nokia Ovi Suite to back up

installation files to a compatible PC, then

use the file manager to remove the

installation files from the device

To map or delete drives, or to define

settings for a compatible remote drive

connected to your device, select

Options >Remote drives.

Find and organize files

Select

>Applications >File mgr..

To find a file, select Options >Find. Select

where to search, and enter a search term

that matches the file name.

memory.If the .sis file is a message

attachment, delete the message from the

Messaging inbox.

To move or copy files and folders, or to

create new folders, select Options >

Organize.

Remove applications and software

Select

>Settings >Data mgr. >

App. mgr..

Shortcut: To apply actions to multiple

items at once, mark the items. To mark or

unmark items, press #.

Scroll to a software package, and select

Options >Remove. Select Yes to

confirm.

If you remove software, you can only

reinstall it if you have the original

software package or a full backup of the

removed software package. If you remove

a software package, you may no longer be

able to open documents created with that

software.

Back up files to a memory card

Select

>Applications >File mgr..

To back up files to a memory card, select

the file types you want to back up, and

Options >Back up phone memory.

Ensure that your memory card has enough

42 Data management

free memory for the files that you have

chosen to back up.

The remote configuration connection is

usually started by the server when the

device settings need to be updated.

Edit the memory card

To create a new server profile, select

Options >Server profiles >Options >

New server profile.

You can format a memory card to erase

the data on it, or you can protect the data

on the memory card with a password.

You may receive these settings from your

service provider in a configuration

message. If not, define the following:

Select

>Applications >File mgr..

Rename or format a memory card

Select Options >Memory card options

Server name — Enter a name for the

and the desired option.

configuration server.

Server ID — Enter the unique ID to

Password protect a memory card

identify the configuration server.

Select Options >Memory card

Server password — Enter a password to

password.

identify your device to the server.

Access point — Select the access point to

use for the connection, or create a new

access point. You can also choose to be

asked for the access point every time you

start a connection. This setting is available

only if you have selected Internet as the

bearer type.

These options are available only if a

compatible memory card is inserted in the

device.

Device manager

Remote configuration

Select

>Settings >Data mgr. >

Host address — Enter the web address

Device manager.

of the configuration server.

Port — Enter the port number of the

With Device manager, you can manage

settings, data, and software on your

device remotely.

server.

User name and Password — Enter your

user ID and password for the

configuration server.

You can connect to a server, and receive

configuration settings for your device. You

may receive server profiles and different

configuration settings from your service

providers or company information

management department. Configuration

settings may include connection and

other settings used by different

Allow configuration — Select Yes to

allow the server to initiate a configuration

session.

Auto-accept all requests — Select Yes if

you do not want the server to ask for your

confirmation when it initiates a

configuration session.

applications in your device. The available

options may vary.

Network authentication — Select

whether to use http authentication.

Connectivity 43

Network user name and Network

password — Enter your user ID and

password for the http authentication. This

setting is available only if you have

selected Network authentication to be

used.

Connectivity

Transfer content from another device

Select

>Settings >Connectivity >

Switch.

With the Switch application, you can

transfer content, such as contacts,

between two compatible Nokia devices.

To connect to the server and receive

configuration settings for your device,

select Options >Start configuration.

The type of content that can be

transferred depends on the model of the

device from which you want to transfer

content. If the other device supports

synchronization, you can also synchronize

data between the other device and your

device. Your device notifies you if the

other device is not compatible.

To view the configuration log of the

selected profile, select Options >View

log.

To update the device software over the

air, select Options >Check for updates.

The update does not erase your settings.

When you receive the update package on

your device, follow the instructions on the

display. Your device is restarted once the

installation is complete.

Downloading software updates may

involve the transmission of large amounts

of data (network service).

If the other device cannot be switched on

without a SIM card, you can insert your SIM

card in it. When your device is switched on

without a SIM card, the offline profile is

automatically activated.

Transfer content

To retrieve data from your other device for

Make sure that the device battery has

enough power, or connect the charger

before starting the update.

the first time:

Select the connection type you want

to use to transfer the data. Both

devices must support the selected

connection type.

Warning:

If you install a software update, you

cannot use the device, even to make

emergency calls, until the installation is

completed and the device is restarted. Be

sure to back up data before accepting

installation of an update.

Selectthe device fromwhichyouwant

to transfer content. You are asked to

enter a code on your device. Enter a

code (1-16 digits), and selectOK. Enter

the same code on the other device,

and select OK. The devices are now

paired.

For some device models, the Switch

application is sent to the other device

as a message. To install the Switch

application on the other device, open

44 Connectivity

the message, and follow the

instructions.

calendar notes, or to connect wirelessly to

devices that use Bluetooth technology.

On your device, select the content you

want to transfer from the other

device.

Since devices using Bluetooth technology

communicate using radio waves, your

device and the other devices do not need

to be in direct line-of-sight. The two

devices only need to be within a

Content is transferred from the memory of

the other device to the corresponding

location in your device.

Transfer time depends on the amount of

data to be transferred. You can cancel the

transfer and continue later.

maximum of 10 meters of each other,

although the connection can be subject to

interference from obstructions such as

walls or other electronic devices.

Several Bluetooth connections can be

active at a time. For example, if your

device is connected to a headset, you can

also transfer files to another compatible

device at the same time.

The synchronization is two-way, and the

data in both devices is the same. If an item

is deleted from either device, it is deleted

from the other device when

synchronizing; you cannot restore deleted

items by synchronizing.

This device is compliant with Bluetooth

Specification 2.0 + EDR supporting the

following profiles: Advanced Audio

Distribution, Audio/Video Remote Control,

Basic Imaging, Basic Printing, Device ID,

Dial-up Networking, File Transfer, Generic

Audio/Video Distribution, Generic Access,

Generic Object Exchange, Handsfree,

Human Interface Device, Headset, Object

Push, Phone Book Access, Serial Port, and

SIM Access. To ensure interoperability

between other devices supporting

Bluetooth technology, use Nokia

To view the log of the last transfer, select

a shortcut in the main view and

Options >View log.

PC connections

You can use your mobile device with a

variety of compatible PC connectivity and

data communications applications. With

Nokia Ovi Suite, you can, for example,

transfer files and images between your

device and a compatible computer.

approved accessories for this model.

Check with the manufacturers of other

devices to determine their compatibility

with this device.

For more information about Ovi Suite and

the download link, see www.ovi.com.

Features using Bluetooth technology

increase the demand on battery power

and reduce the battery life.

Bluetooth

About Bluetooth

Bluetooth technology enables wireless

connections between electronic devices

within a range of 10 meters (33 feet). A

Bluetooth connection can be used to send

images, videos, text, business cards,

Security tips

When you are not using Bluetooth

connectivity, select Bluetooth >Off or

My phone's visibility >Hidden.

Connectivity 45

Do not pair with an unknown device.

The Sent folder in the Messaging

application does not store messages sent

using Bluetooth connectivity.

Send and receive data with Bluetooth

Select

>Settings >Connectivity >

To receive data using Bluetooth

Bluetooth.

connectivity, select Bluetooth >On and

My phone's visibility >Shown to all to

receive data from a non-paired device or

Hidden to receive data from a paired

device only. When you receive data

through Bluetooth connectivity,

When you activate Bluetooth

connectivity for the first time, you are

asked to name your device. Give your

device a unique name to make it easy

to recognize if there are several

Bluetooth devices nearby.

depending on the settings of an active

profile, a tone sounds, and you are asked

if you want to accept the message in

which the data is included. If you accept,

the message is placed in the Inbox folder

in the Messaging application.

Select Bluetooth >On.

Select My phone's visibility >

Shown to all or Define period. If you

select Define period, you need to

define the time during which your

device is visible to others. Your device

and the name you entered can now be

seen by other users with devices using

Bluetooth technology.

Tip: You can access the files in the device

or on the memory card using a compatible

accessory that supports the File Transfer

Profile Client service (for example, a

laptop computer).

A Bluetooth connection is disconnected

automatically after sending or receiving

data. Only Nokia Ovi Suite and some

accessories such as headsets may

maintain a connection even if not actively

used.

Open the application where the item

you want to send is stored.

Select the item and Options >

Send >Via Bluetooth. The device

searches for other devices using

Bluetooth technology within range

and lists them.

Tip: If you have sent data using

Bluetooth connectivity before, a list of

the previous search results is

displayed. To search for more

Bluetooth devices, select More

devices.

Pair devices

Select

>Settings >Connectivity >

Bluetooth.

Open the paired devices tab.

Select the device with which you want

to connect. If the other device

requires pairing before data can be

transmitted, you are asked to enter a

passcode.

Before pairing, decide on your own

passcode (1-16 digits) and agree with the

user of the other device to use the same

code. Devices that do not have a user

interface have a fixed passcode. You need

the passcode only when you connect the

devices for the first time. After pairing, it

is possible to authorize the connection.

When the connection has been

established, Sending data is displayed.

46 Connectivity

Pairing and authorizing the connection

makes connecting quicker and easier, as

device and the other device can be made

without your knowledge. No separate

you do not have to accept the connection acceptance or authorization is needed.

between paired devices every time you

Use this status for your own devices, such

as your compatible headset or computer,

or devices that belong to someone you

trust. If you want to accept connection

requests from the other device separately

every time, select Set as unauthorized.

establish a connection.

The passcode for remote SIM access must

have 16 digits.

Select Options >New paired

device. The device starts to search for

Bluetooth devices within range. If you

have sent data using Bluetooth

connectivity before, a list of the

previous search results is displayed.

To search for more Bluetooth devices,

select More devices.

To use a Bluetooth audio accessory such

as a Bluetooth handsfree or headset, you

need to pair your device with the

accessory. For the passcode and further

instructions, see the accessory user guide.

To connect to the audio accessory, switch

on the accessory. Some audio accessories

connect automatically to your device.

Otherwise, open the paired devices tab,

select the accessory and Options >

Connect to audio device.

Select the device with which you want

to pair and enter the passcode. The

same passcode must be entered to

the other device as well.

Select Yes to make the connection

between your device and the other

device automatic, or No to confirm

the connection manually every time a

connection attempt is made. After

pairing, the device is saved to the

paired devices page.

Block devices

Select

>Settings >Connectivity >

Bluetooth.

To block a device from establishing a

Bluetooth connection to your device, open

the paired devices tab.

To give a nickname to the paired device,

select Options >Assign short name. The

nickname is only displayed in your device.

Select a device you want to block and

Options >Block.

To delete a pairing, select the device

whose pairing you want to delete and

Options >Delete. To delete all pairings,

select Options >Delete all. If you are

currently connected to a device and cancel

the pairing with that device, pairing is

removed immediately and the connection

is ended.

To unblock a device, open the blocked

devices tab, and select Options >

Delete.

To unblock all blocked devices, select

Options >Delete all.

If you reject a pairing request from

another device, you are asked if you want

to block all future connection requests

To allow a paired device to connect

automatically to your device, select Set as

authorized. Connections between your

Connectivity 47

from this device. If you accept the query,

the remote device is added to the list of

blocked devices.

To set the device to ask which mode to use

each time you connect the USB data cable

to the device, select Ask on

connection >Yes.

Data cable

To use Nokia Ovi Suite with your device,

install Nokia Ovi Suite on your PC, connect

the USB data cable, and select PC Suite.

To avoid damaging the memory card or

corrupting data, do not disconnect the

USB data cable during a data transfer.

Transfer data between your device and

Sync

a PC

Select

>Settings >Connectivity >

Insert a memory card in your device,

and connect the device to a

Sync.

compatible PC with the USB data

cable. Always connect the data cable

first to your device, and then to the

other device or computer.

Sync enables you to synchronize your

notes, calendar entries, text and

multimedia messages, browser

bookmarks, or contacts with various

compatible applications on a compatible

computer or on the internet.

You may receive synchronization settings

in a special message from your service

provider.

When the device asks which mode to

use, select Mass storage. In this

mode, you can see your device as a

removable hard drive in your

computer.

Transfer data between the computer

and your device.

A synchronization profile contains the

necessary settings for synchronization.

End the connection from the

computer (for example, from an

Unplug or Eject Hardware wizard in

Windows) to avoid damaging the

memory card.

When you open the Sync application, the

default or previously used sync profile is

displayed. To modify the profile, scroll to

a sync item, and select Mark to include it

in the profile or Unmark to leave it out.

To transfer images from the device to a

compatible PC, or to print the images

stored in the device on a compatible

printer, connect the USB data cable to the

PC or printer, and select Image transfer.

To manage sync profiles, select Options

and the desired option.

To synchronize data, select Options >

To modify the USB mode settings, select

Synchronize.

>Settings >Connectivity >USB.

To cancel synchronization before it

To change the USB mode you normally use

with the USB data cable, select USB

connection mode.

finishes, select Cancel.

48 Green tips

Green tips

You may recycle the packaging and user

guides at your local recycling point.

Save paper

This user guide helps you get started with

your device. For more comprehensive

instructions, open the help function that

is included in your device (in most

applications, select Options >Help). You

can also find user guides and other

support at www.nokia-

Here are tips on how you can contribute

to protecting the environment.

Save energy

latinoamerica.com/soporte.

When you have fully charged the battery

and disconnected the charger from the

device, remember to also unplug the

charger from the wall outlet.

Learn more

For more information on the

environmental attributes of your device,

see www.nokia.com/ecodeclaration.

You do not need to charge your battery so

often if you do the following:

Product and safety information

•

Close and disable applications,

services, and connections when you

are not using them.

Battery

Battery and charger information

Your device is powered by a rechargeable battery. The battery

intended for use with this device is BL-4CT. Nokia may make

additional battery models available for this device. This

device is intended for use when supplied with power from

the following chargers: AC-8. The exact charger model

number may vary depending on the type of plug. The plug

variant is identified by one of the following: E, EB, X, AR, U, A,

C, K, or UB.

•

Decrease the brightness of the screen.

Set the device to enter the power

saver mode after the minimum period

of inactivity, if available in your

device.

•

Disable unnecessary sounds, such as

keypad tones. Set the volume of your

device to an average level.

The battery can be charged and discharged hundreds of

times, but it will eventually wear out. When the talk and

standby times are noticeably shorter than normal, replace the

battery. Use only Nokia approved batteries, and recharge

your battery only with Nokia approved chargers designated

for this device.

Recycle

Did you remember to recycle your old

device? 65-80% of the materials in a Nokia

mobile phone can be recycled. Always

return your used electronic products,

batteries, and packaging materials to a

dedicated collection point. By doing this,

you help prevent uncontrolled waste

disposal and promote the recycling of

materials. Check how to recycle your

Nokia products at www.nokia.com/

werecycle or www.nokia.mobi/

If a battery is being used for the first time or if the battery has

not been used for a prolonged period, it may be necessary to

connect the charger, then disconnect and reconnect it to

begin charging the battery. If the battery is completely

discharged, it may take several minutes before the charging

indicator appears on the display or before any calls can be

made.

Safe removal. Always switch the device off and disconnect the

charger before removing the battery.

werecycle.

Product and safety information 49

Proper charging. Unplug the charger from the electrical plug

and the device when not in use. Do not leave a fully charged

battery connected to a charger, since overcharging may

shorten its lifetime. If left unused, a fully charged battery will

lose its charge over time.

Authenticate hologram

When you look at the hologram on the label, you should

see the Nokia connecting hands symbol from one angle

and the Nokia Original Accessories logo when looking

from another angle.

Avoid extreme temperatures. Always try to keep the battery

between 59°F and 77°F (15°C and 25°C). Extreme

temperatures reduce the capacity and lifetime of the battery.

A device with a hot or cold battery may not work temporarily.

Battery performance is particularly limited in temperatures

well below freezing.

Do not short-circuit. Accidental short-circuiting can occur

when a metallicobjectsuch as acoin, clip, orpen causes direct

connection of the positive (+) and negative (-) terminals of

the battery. (These look like metal strips on the battery.) This

might happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuiting the terminals may

damage the battery or the connecting object.

When you angle the hologram left, right, down and up,

you should see 1, 2, 3 and 4 dots on each side

respectively.

Disposal. Do not dispose of batteries in a fire as they may

explode. Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as household

waste.

Leak. Do not dismantle, cut, open, crush, bend, puncture, or

shred cells or batteries. In the event of a battery leak, prevent

battery liquid contact with skin or eyes. If this happens, flush

the affected areas immediately with water, or seek medical

help.

Damage. Do not modify, remanufacture, attempt to insert

foreign objects into the battery or immerse or expose it to

water or other liquids. Batteries may explode if damaged.

Successful completion of the steps is not a total assurance of

the authenticity of the battery. If you cannot confirm

authenticity or if you have any reason to believe that your

Nokia battery with the hologram on the label is not an

authentic Nokia battery, you should refrain from using it, and

take it to the nearest Nokia authorized service center or

dealer for assistance.

Correct use. Use the battery only for its intended purpose.

Improper battery use may result in a fire, explosion, or other

hazard. If the device or battery is dropped, especially on a

hard surface, and you believe the battery has been damaged,

take it to a service center for inspection before continuing to

use it. Never use any charger or battery that is damaged. Keep

your battery out of the reach of small children.

For additional information, refer to the warranty and

reference leaflet included with your Nokia device.

Nokia battery authentication guidelines

Taking care of your device

Always use original Nokia batteries for your safety. To check

that you are getting an original Nokia battery, purchase it

from a Nokia authorized service center or dealer, and inspect

the hologram label using the following steps:

Your device is a product of superior design and craftsmanship

and should be treated with care. The following suggestions

will help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity, and all

types of liquids or moisture can contain minerals that

will corrode electronic circuits. If your device does get

wet, remove the battery, and allow the device to dry

completely before replacing it.

50 Product and safety information

•

Do not use or store the device in dusty, dirty areas. Its

moving parts and electronic components can be

damaged.

Do not store the device in high or cold temperatyre.

High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics. When the device warms to its normal

temperature from a cold temperature, moisture can

form inside the device and damage electronic circuit

boards.

To send data files or messages requires a quality connection

to the network. Data files or messages may be delayed until

such a connection is available. Follow the separation distance

instructions until the transmission is completed.

•

Medical devices

Operation of radio transmitting equipment, including

wireless phones, may interfere with the function of

inadequately protected medical devices. Consult a physician

or the manufacturer of the medical device to determine

whether they are adequately shielded from external RF

energy. Switch off your device when regulations posted

instruct you to do so. Hospitals or health care facilities may

use equipment sensitive to external RF energy.

•

Do not attempt to open the device other than as

instructed in this guide.

Do not drop, knock, or shake the device. Rough

handling can break internal circuit boards and fine

mechanics.

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the device. Only use a soft, clean,

dry cloth to clean the surface of the device.

Implanted medical devices

•

Manufacturers of medical devices recommend a minimum

separation of 15.3 centimeters (6 inches) between a wireless

device and an implanted medical device, such as a pacemaker

or implanted cardioverter defibrillator, to avoid potential

interference with the medical device. Persons who have such

devices should:

•

Do not paint the device. Paint can clog the moving parts

and prevent proper operation.

Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or

attachments could damage the device and may violate

regulations governing radio devices.

•

Always keep the wireless device more than 15.3

centimeters (6 inches) from the medical device.

•

Not carry the wireless device in a breast pocket.

•

Use chargers indoors.

Hold the wireless device tothe ear opposite the medical

Backup all data you want to keep, such as contacts and

device.

calendar notes.

•

Turn the wireless device off if there is any reason to

suspect that interference is taking place.

•

To reset the device from time to time for optimum

performance, power off the device and remove the

battery.

Follow the manufacturer directions for the implanted

medical device.

These suggestions apply equally to your device, battery,

charger, or any accessory.

If you have any questions about using your wireless device

with an implanted medical device, consult your health care

provider.

Recycle

Always return your used electronic products, batteries, and

packaging materials to dedicated collection points. This way

you help prevent uncontrolled waste disposal and promote

the recycling of materials. Check product environmental

information and how to recycle your Nokia products at

www.nokia.com/werecycle, or www.nokia.mobi/werecycle.

Hearing aids

Some digital wireless devices may interfere with some

hearing aids.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as

electronic fuel injection, electronic antilock braking,

electronic speed control, and air bag systems. For more

information, check with the manufacturer of your vehicle or

its equipment.

Additional safety information

Small children

Your device and its accessories are not toys. They may contain

small parts. Keep them out of the reach of small children.

Operating environment

Only qualified personnel should service the device or install

the device in a vehicle. Faulty installation or service may be

dangerous and may invalidate your warranty. Check regularly

that all wireless device equipment in your vehicle is mounted

and operating properly. Do not store or carry flammable

This device meets RF exposure guidelines in the normal use

position at the ear or at least 1.5 centimeters (5/8 inch) away

from the body. Any carry case, belt clip, or holder for body-

worn operation should not contain metal and should position

the device the above-stated distance from your body.

liquids, gases, or explosive materials in the same

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device

may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

compartment as the device, its parts, or accessories.

Remember that air bags inflate with great force. Do not place

your device or accessories in the air bag deployment area.

Certification information (SAR)

Switch off your device before boarding an aircraft. The use of

wireless teledevices in an aircraft may be dangerous to the

operation of the aircraft and may be illegal.

This mobile device meets guidelines for exposure to

radio waves.

Potentially explosive environments

Your mobile device is a radio transmitter and receiver. It is

designed not to exceed the limits for exposure to radio waves

recommended by international guidelines. These guidelines

were developed by the independent scientific organization

ICNIRP and include safety margins designed to assure the

protection of all persons, regardless of age and health.

Switch off your device in any area with a potentially explosive

atmosphere. Obey all posted instructions. Sparks in such

areas could cause an explosion or fire resulting in bodily

injury or death. Switch off the device at refueling points such

as near gas pumps at service stations. Observe restrictions in

fuel depots, storage, and distribution areas; chemical plants;

or where blasting operations are in progress. Areas with a

potentially explosive atmosphere are often, but not always,

clearly marked. They include areas where you would be

advised to turn off your vehicle engine, below deck on boats,

chemical transfer or storage facilities and where the air

contains chemicals or particles such as grain, dust, or metal

powders. You should check with the manufacturers of

vehicles using liquefied petroleum gas (such as propane or

butane) to determine if this device can be safely used in their

vicinity.

The exposure guidelines for mobile devices employ a unit of

measurement known as the Specific Absorption Rate or SAR.

The SAR limit stated in the ICNIRP guidelines is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for

SAR are conducted using standard operating positions with

the device transmitting at its highest certified power level in

all tested frequency bands. The actual SAR level of an

operating device can be below the maximum value because

the device is designed to use only the power required to reach

the network. That amount changes depending on a number

of factors such as how close you are to a network base station.

Emergency calls

The highest SAR value under the ICNIRP guidelines for use of

the device at the ear is 0.91 W/kg.

Important: This device operates using radio signals,

wireless networks, landline networks and user-programmed

functions. If your device supports voice calls over the internet

(internet calls), activate both the internet calls and the

cellular phone. The device may attempt to make emergency

calls over both the cellular networks and through your

internet call provider if both are activated. Connections in all

conditions cannot be guaranteed. You should never rely

solely on any wireless device for essential communications

like medical emergencies.

Use of device accessories may result in different SAR values.

SAR values may vary depending on national reporting and

testing requirements and the network band. Additional SAR

information may be provided under product information at

www.nokia.com.

Your mobile device is also designed to meet the requirements

for exposure to radio waves established by the Federal

Communications Commission (USA) and Industry Canada.

These requirements set a SAR limit of 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported under this

standard during product certification for use at the ear is 1.02

W/kg and when properly worn on the body is 0.73 W/kg.

To make an emergency call:

If the device is not on, switch it on. Check for adequate

signal strength. Depending on your device, you may

also need to complete the following:

•

Insert a SIM card if your device uses one.

Remove certain call restrictions you have

activated in your device.

•

Change your profile from Offline or Flight profile

to an active profile.

DECLARATION OF CONFORMITY

Press the end key as many times as needed to clear the

display and ready the device for calls.

Enter the official emergency number for your present

location. Emergency numbers vary by location.

Press the call key.

52 Copyright and other notices

Hereby, NOKIA CORPORATION declares that this RM-577

product is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC. A copy of the

Declaration of Conformity can be found at http://

Reverse engineering of software in the device is prohibited

to the extent permitted by applicable law. Insofar as this user

guide contains any limitations on Nokia's representations,

warranties, damages and liabilities, such limitations shall

likewise limit any representations, warranties, damages and

liabilities of Nokia's licensors.

www.nokia.com/phones/declaration_of_conformity/.

Nokia, Nokia Connecting People, Navi and OVI are trademarks

or registered trademarks of Nokia Corporation. Nokia tune is

a sound mark of Nokia Corporation. Other product and

company names mentioned herein may be trademarks or

tradenames of their respective owners.

The availability of some features may vary by region. Please

contact your operator for more details.

The availability of particular products and applications and

services for these products may vary by region. Please check

with your Nokia dealer for details and availability of language

options. This device may contain commodities, technology or

software subject to export laws and regulations from the US

and other countries. Diversion contrary to law is prohibited.

Reproduction, transfer, distribution, or storage of part or all

of the contents in this document in any form without the prior

written permission of Nokia is prohibited. Nokia operates a

policy of ongoing development. Nokia reserves the right to

make changes and improvements to any of the products

described in this document without prior notice.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example,

when using a telephone in close proximity to receiving

equipment). The FCC or Industry Canada can require you to

stop using your telephone if such interference cannot be

eliminated. If you require assistance, contact your local

service facility. This device complies with part 15 of the FCC

rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation. Any

changes or modifications not expressly approved by Nokia

could void the user's authority to operate this equipment.

Java and all Java-based marks are trademarks or registered

trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent

Portfolio License (i) for personal and noncommercial use in

connection with information which has been encoded in

compliance with the MPEG-4 Visual Standard by a consumer

engaged in a personal and noncommercial activity and (ii) for

use in connection with MPEG-4 video provided by a licensed

video provider. No license is granted or shall be implied for

any other use. Additional information, including that related

to promotional, internal, and commercial uses, may be

obtained from MPEG LA, LLC. See http://www.mpegla.com.

/Issue 2.0 EN-US

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS

LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME

OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT

DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS".

EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN

RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS

DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS

DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR

NOTICE.

Index 53

calendar

Index

—

creating entries

call forward

Symbols/Numbers

call restriction

1-touch dialing

16 caller ID

calls

—

1-touch dialing

access codes

accessories

answering

conference call

making

—

settings

alarm clock

rejecting

antennas

settings

application settings

audio messages

auto-update for time/date

autolock period

voice mail

27 camera

—

capturing images

image mode

video mode

charging the battery

background image

barring password

battery

21 Clock

—

settings

computer connections