Nokia Cell Phone 6234 User Manual

Nokia 6234 User Guide

9246861

Issue 2

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with

information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and

noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be

implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from

MPEG LA, LLC. See <http://www.mpegla.com>.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products

described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages

howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied,

including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the

accuracy, reliability or contents of this document. Nokia reserves the right to revize this document or withdraw it at any time without prior

notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.

Diversion contrary to law is prohibited.

9246861/ Issue 2

Contents

For your safety.................................................................................................................................... 12

General information........................................................................................................................... 16

Access codes......................................................................................................................................................................................... 16

Security code..................................................................................................................................................................................... 16

PIN codes............................................................................................................................................................................................ 16

PUK codes........................................................................................................................................................................................... 16

Barring password ............................................................................................................................................................................. 17

Configuration settings service......................................................................................................................................................... 17

Download content and applications.............................................................................................................................................. 17

Nokia support and contact information....................................................................................................................................... 18

1.Get started ...................................................................................................................................... 19

Install the SIM card and the battery ............................................................................................................................................. 19

Install a memory card ........................................................................................................................................................................ 21

Charge the battery.............................................................................................................................................................................. 22

Switch the phone on and off........................................................................................................................................................... 23

Set the time, time zone, and date............................................................................................................................................... 23

Plug and play service ...................................................................................................................................................................... 23

Normal operating position................................................................................................................................................................ 24

2.Your phone...................................................................................................................................... 25

Keys and parts...................................................................................................................................................................................... 25

Standby mode....................................................................................................................................................................................... 26

Active standby .................................................................................................................................................................................. 27

Content items in the navigation mode.................................................................................................................................. 27

Standby mode shortcuts................................................................................................................................................................ 28

Power saver ....................................................................................................................................................................................... 28

Indicators ........................................................................................................................................................................................... 28

Keypad lock (keyguard)...................................................................................................................................................................... 30

3.Call functions.................................................................................................................................. 31

Make a voice call................................................................................................................................................................................. 31

Speed dialing..................................................................................................................................................................................... 31

Enhanced voice dialing .................................................................................................................................................................. 32

Make a voice dialing call............................................................................................................................................................ 32

Answer or reject a voice call............................................................................................................................................................ 32

Call waiting ....................................................................................................................................................................................... 33

Options during a voice call............................................................................................................................................................... 33

Make a video call................................................................................................................................................................................. 33

Answer or reject a video call............................................................................................................................................................ 34

Options during a video call............................................................................................................................................................... 35

4.Write text........................................................................................................................................ 36

Settings .................................................................................................................................................................................................. 36

Predictive text input........................................................................................................................................................................... 36

Traditional text input......................................................................................................................................................................... 37

5.Navigate the menus........................................................................................................................ 38

6.Media............................................................................................................................................... 39

Camera ................................................................................................................................................................................................... 39

Take a photo...................................................................................................................................................................................... 39

Record a video clip.......................................................................................................................................................................... 40

Camera settings................................................................................................................................................................................ 40

Media player......................................................................................................................................................................................... 40

Progressive download..................................................................................................................................................................... 40

Set up the phone for a streaming service................................................................................................................................. 41

Music player.......................................................................................................................................................................................... 41

Play the music tracks transferred to the phone...................................................................................................................... 41

Music player settings...................................................................................................................................................................... 42

Radio....................................................................................................................................................................................................... 43

Save radio channels ........................................................................................................................................................................ 43

Listen to the radio ........................................................................................................................................................................... 43

Voice recorder ...................................................................................................................................................................................... 44

Record sound..................................................................................................................................................................................... 44

List of recordings ............................................................................................................................................................................. 45

Define a storage folder................................................................................................................................................................... 45

Equalizer ................................................................................................................................................................................................ 45

7.Web.................................................................................................................................................. 46

Basic steps to access and use services.......................................................................................................................................... 46

Set up browsing................................................................................................................................................................................... 46

Connect to a service........................................................................................................................................................................... 47

Browse pages........................................................................................................................................................................................ 47

Browse with phone keys................................................................................................................................................................ 48

Options while browsing ................................................................................................................................................................. 48

Direct calling..................................................................................................................................................................................... 48

Bookmarks............................................................................................................................................................................................. 49

Receive a bookmark ........................................................................................................................................................................ 49

Appearance settings........................................................................................................................................................................... 49

Security settings.................................................................................................................................................................................. 50

Cookies................................................................................................................................................................................................ 50

Scripts over secure connection.................................................................................................................................................... 50

Download settings .............................................................................................................................................................................. 51

Service inbox ........................................................................................................................................................................................ 51

Service inbox settings..................................................................................................................................................................... 51

Cache memory...................................................................................................................................................................................... 52

Browser security.................................................................................................................................................................................. 52

Security module ............................................................................................................................................................................... 52

Certificates......................................................................................................................................................................................... 53

Digital signature............................................................................................................................................................................... 53

8.Applications (Apps.)....................................................................................................................... 55

Games..................................................................................................................................................................................................... 55

Launch a game ................................................................................................................................................................................. 55

Game downloads.............................................................................................................................................................................. 55

Game settings................................................................................................................................................................................... 55

Collection............................................................................................................................................................................................... 55

Launch an application.................................................................................................................................................................... 55

Application options......................................................................................................................................................................... 56

Download an application............................................................................................................................................................... 56

Presenter................................................................................................................................................................................................ 57

9.Push To Talk (PTT) .......................................................................................................................... 59

Connect to the PTT service ............................................................................................................................................................... 59

Make and receive a PTT call............................................................................................................................................................. 60

Make a channel or a group call................................................................................................................................................... 60

Make a one-to-one call ................................................................................................................................................................. 61

Make a PTT call to multiple recipients....................................................................................................................................... 61

Receive a PTT call............................................................................................................................................................................. 61

Callback requests................................................................................................................................................................................. 61

Send a callback request ................................................................................................................................................................. 62

Respond to a callback request ..................................................................................................................................................... 62

Add a one-to-one contact................................................................................................................................................................ 62

PTT channels ......................................................................................................................................................................................... 63

Add a channel................................................................................................................................................................................... 63

Receive an invitation...................................................................................................................................................................... 64

PTT settings........................................................................................................................................................................................... 64

10.Messaging...................................................................................................................................... 66

Text messages (SMS).......................................................................................................................................................................... 66

Write and send SMS messages.................................................................................................................................................... 66

Read and reply to an SMS message ........................................................................................................................................... 67

SIM messages....................................................................................................................................................................................... 67

Multimedia messages......................................................................................................................................................................... 68

Write and send a multimedia message ..................................................................................................................................... 68

Send a message................................................................................................................................................................................ 69

Cancel message sending................................................................................................................................................................ 70

Read and reply to a multimedia message................................................................................................................................. 70

Memory full........................................................................................................................................................................................... 71

Folders .................................................................................................................................................................................................... 71

Flash messages..................................................................................................................................................................................... 71

Write a flash message.................................................................................................................................................................... 72

Receive a flash message ................................................................................................................................................................ 72

Audio messages.................................................................................................................................................................................... 72

Create an audio message............................................................................................................................................................... 72

Receive an audio message............................................................................................................................................................. 73

Email application................................................................................................................................................................................. 73

Settings Wizard................................................................................................................................................................................ 73

Write and send an email................................................................................................................................................................ 74

Download email................................................................................................................................................................................ 74

Read and reply to email................................................................................................................................................................. 75

E-mail folders.................................................................................................................................................................................... 75

Spam filter ......................................................................................................................................................................................... 76

Voice messages.................................................................................................................................................................................... 76

Info messages....................................................................................................................................................................................... 76

Service commands .............................................................................................................................................................................. 76

Delete messages .................................................................................................................................................................................. 77

Message settings................................................................................................................................................................................. 77

General................................................................................................................................................................................................ 77

Text message and SMS email....................................................................................................................................................... 77

Multimedia message....................................................................................................................................................................... 78

Email.................................................................................................................................................................................................... 79

11.My Items........................................................................................................................................ 81

Format memory card.......................................................................................................................................................................... 81

12.Organizer ....................................................................................................................................... 82

Alarm clock ........................................................................................................................................................................................... 82

Stop the alarm.................................................................................................................................................................................. 82

Calendar................................................................................................................................................................................................. 82

Make a calendar note..................................................................................................................................................................... 83

Note alarm......................................................................................................................................................................................... 83

To-do list................................................................................................................................................................................................ 83

Notes....................................................................................................................................................................................................... 84

Calculator .............................................................................................................................................................................................. 84

Convert currency.............................................................................................................................................................................. 85

Countdown timer ................................................................................................................................................................................ 85

Stopwatch ............................................................................................................................................................................................. 85

13.Contacts......................................................................................................................................... 87

Search for a contact........................................................................................................................................................................... 87

Save names and phone numbers .................................................................................................................................................... 87

Save numbers and text items .......................................................................................................................................................... 87

Copy contacts....................................................................................................................................................................................... 88

Edit contact details............................................................................................................................................................................. 88

Delete contacts.................................................................................................................................................................................... 88

Business cards...................................................................................................................................................................................... 89

Groups .................................................................................................................................................................................................... 89

Speed dials ............................................................................................................................................................................................ 90

Service and my numbers................................................................................................................................................................... 90

14.Log.................................................................................................................................................. 91

15.Instant messages (IM)................................................................................................................... 92

Access the instant messaging menu.......................................................................................................................................... 92

Connect to instant messaging ..................................................................................................................................................... 93

Start an instant messaging conversation ................................................................................................................................. 93

Instant messaging invitation........................................................................................................................................................ 94

Read a received instant message................................................................................................................................................ 95

Join an instant messaging conversation................................................................................................................................... 95

Edit your availability status .......................................................................................................................................................... 95

Contacts for instant messaging................................................................................................................................................... 96

Block and unblock messages........................................................................................................................................................ 96

Groups................................................................................................................................................................................................. 96

16.Settings.......................................................................................................................................... 98

Profiles.................................................................................................................................................................................................... 98

Flight mode........................................................................................................................................................................................ 98

Themes.................................................................................................................................................................................................... 99

Tones....................................................................................................................................................................................................... 99

Display.................................................................................................................................................................................................... 99

Standby mode................................................................................................................................................................................... 99

Enable or disable active standby from idle........................................................................................................................... 99

Standby settings............................................................................................................................................................................. 100

Screen saver .................................................................................................................................................................................... 100

Power saver ..................................................................................................................................................................................... 101

Sleep mode ...................................................................................................................................................................................... 101

Font size ........................................................................................................................................................................................... 101

Time and date..................................................................................................................................................................................... 101

My shortcuts....................................................................................................................................................................................... 101

Left selection key........................................................................................................................................................................... 102

Right selection key........................................................................................................................................................................ 102

Navigation key................................................................................................................................................................................ 102

Enable active standby................................................................................................................................................................... 102

Voice commands............................................................................................................................................................................ 103

Connectivity........................................................................................................................................................................................ 103

Bluetooth wireless technology................................................................................................................................................... 103

Set up a Bluetooth connection.................................................................................................................................................. 104

Bluetooth wireless connection................................................................................................................................................... 104

Bluetooth settings ......................................................................................................................................................................... 105

Infrared ............................................................................................................................................................................................. 105

Packet data...................................................................................................................................................................................... 106

Packet data connection................................................................................................................................................................ 106

Packet data settings...................................................................................................................................................................... 106

Data transfer................................................................................................................................................................................... 107

Data transfer with a compatible device.................................................................................................................................. 107

Data transfer without SIM card................................................................................................................................................. 108

Synchronize from a compatible PC........................................................................................................................................... 108

Synchronize from a server........................................................................................................................................................... 108

USB data cable ............................................................................................................................................................................... 109

Call......................................................................................................................................................................................................... 109

Phone.................................................................................................................................................................................................... 110

Enhancements.................................................................................................................................................................................... 111

Configuration ..................................................................................................................................................................................... 111

Security ................................................................................................................................................................................................ 112

Digital rights management............................................................................................................................................................. 113

Restore factory settings .................................................................................................................................................................. 114

17.SIM Toolkit (STK)........................................................................................................................ 115

18.PC connectivity............................................................................................................................ 116

Nokia PC Suite.................................................................................................................................................................................... 116

EGPRS, HSCSD, CSD, and WCDMA............................................................................................................................................... 116

Data communication applications ............................................................................................................................................... 116

19.Battery information.................................................................................................................... 118

Charging and discharging............................................................................................................................................................... 118

Nokia battery authentication guidelines.................................................................................................................................... 119

Care and maintenance...................................................................................................................... 121

Additional safety information......................................................................................................... 122

Index.................................................................................................................................................. 126

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further

information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration

while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the phone at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect

incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and

return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the

call until given permission to do so.

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900; GSM 1800 and1900; and WCDMA2100

networks. Contact your service provider for more information about networks.

When you use the features in this device, obey all laws and respect privacy and legitimate rights of others.

When you take and use images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights

of others.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not

switch the device on when wireless device use may cause interference or danger.

■ Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on

features in the wireless network to function. These network services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize network services. Your service provider may

need to give you additional instructions for their use and explain what charges will apply. Some networks may have

limitations that affect how you can use network services. For instance, some networks may not support all language-

dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not

appear on your device menu. Your device may also have been specially configured. This configuration may include changes in

menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as

multimedia messaging (MMS), browsing, instant messaging, presence-enhanced contacts, remote synchronization, and

content downloading using the browser or MMS, require network support for these technologies.

■ Shared memory

The following features in this device may share memory: my items, contacts, text messages, multimedia messages, instant

messages, e-mail, calendar, to-do notes, Java^TMgames and applications, and note application. Use of one or more of these

features may reduce the memory available for the remaining features sharing memory. For example, saving many Java

applications may use all of the available memory. Your device may display a message that the memory is full when you try to

use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features

before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to

them in addition to the memory shared with other features.

■ Enhancements

A few practical rules about accessories and enhancements.

•

Keep all accessories and enhancements out of the reach of small children.

When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.

Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

•

Installation of any complex car enhancements must be made by qualified personnel only.

General information

■ Access codes

Security code

The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is

12345. To change the code, and to set the phone to request the code, see Security p. 111.

If you enter an incorrect security code five times in succession, the phone ignores further entries of the code.

Wait for 5 minutes, and enter the code again.

PIN codes

The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4

to 8 digits) help to protect your SIM card against unauthorized use. See Security p. 111. The PIN code is usually

supplied with the SIM card. Set the phone to request the PIN code each time the phone is switched on.

The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.

The module PIN is required to access the information in the security module. See Security module p. 52. The

module PIN is supplied with the SIM card if the SIM card has a security module in it.

The signing PIN is required for the digital signature. See Digital signature p. 53. The signing PIN is supplied with

the SIM card if the SIM card has a security module in it.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is

required to change a blocked PIN code and UPIN code, respectively. If the codes are not supplied with the SIM

card, contact your service provider for the codes.

Barring password

The barring password (4 digits) is required when you use the Call barring service. See Security p. 111. You can

obtain the password from your service provider. If you enter an incorrect barring password three times in

succession, the password is blocked. Contact your service provider or network operator.

■ Configuration settings service

Before you use multimedia messaging, instant messaging and presence, push to talk, email, synchronization,

streaming, and the browser, you must have the proper configuration settings on your phone. You may receive

the settings directly as a configuration message, which you save to your phone. For more information on

availability, contact your network operator, service provider, or nearest authorized Nokia dealer.

When you have received the settings as a configuration message, and the settings are not automatically saved

and activated, Configuration settings received is displayed.

To save the received settings, select Show > Save. If the phone requests Enter settings’ PIN:, enter the PIN code

for the settings, and select OK. To receive the PIN code, contact the service provider that supplies the settings.

If no settings are saved, these settings are saved and set as default configuration settings. Otherwise, the

phone asks, Activate saved configuration settings?

To discard the received settings, select Show > Discard.

■ Download content and applications

You may be able to download content, such as themes, tones, and video clips, to the phone (network service).

Select the download function (for example, in My Items). To access the download function, see the respective

menu descriptions. For availability of different services, pricing, and tariffs, contact your service provider.

Important: Use only services that you trust and that offer adequate security and protection against harmful

software.

■ Nokia support and contact information

Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional

information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact

customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.

1. Get started

■ Install the SIM card and the battery

Always switch the device off and disconnect the charger before removing the battery.

Keep all SIM cards out of the reach of small children.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

This device is intended for use with the BP-6M-S battery.

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling,

inserting, or removing the card.

1. With the back of the phone facing you, slide the back cover (1) to remove it

from the phone (2).

2. To remove the battery, lift it as shown (3).

3. To release the SIM card holder, gently pull the locking clip of the

card holder, and open it (4)

Insert the SIM card into the SIM card holder (5). Make sure that the SIM

card is properly inserted and that the gold-colored contact area on the card

is facing downwards.

Close the SIM card holder (6), and press it until it snaps into position.

4. Replace the battery (7)

5. Place the back cover in the correct position (8).

6. Slide the back cover into place (9).

■ Install a memory card

The phone’s microSD card included with your phone contains preloaded ringing tones,

themes, tones, and graphics. If you delete, reload, or replace this card, these functions and

features may not function properly.

Use only compatible microSD cards with this device. Other memory cards, such as reduced size MMCs, do not fit in the

memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory

card as well as the device, and data stored on the incompatible card may be corrupted.

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for

memory cards but not all other brands may function correctly or be fully compatible with this device.

You can use a memory card to extend the memory of My Items. See My Items p. 80.

You can insert or change the memory card without switching the phone off.

Important: Do not remove the memory card in the middle of an operation when the card is being accessed.

Removing the card in the middle of an operation may damage the memory card as well as the device, and data

stored on the card may be corrupted.

To insert the memory card, open the memory card holder as shown (1). Place the memory card in the card

holder (2). Make sure that the memory card is properly inserted—that it clicks into the holder—and that the

gold-colored contact area on the card is facing upwards. Close the memory card holder.

You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in My

Items.

To format the memory card, see Format memory card p. 80.

■ Charge the battery

Check the model number of any charger before use with this device. This device is intended for use when supplied with power

from the AC-4, AC-1, AC-3, or DC-4 charger.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model.

The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of

any enhancement, grasp and pull the plug, not the cord.

1. Connect the charger to a wall outlet.

2. Connect the plug from the charger

into the CA-44 charging adapter (not provided with the phone), and the

adapter plug into the jack on the bottom of your phone.

If the battery is completely discharged, it may take a few minutes before the

charging indicator appears on the display or before any calls can be made.

The charging time depends on the charger and the battery used. For example, charging a BP-6M Li-Ion battery

with the AC-4 charger takes about 1 hour and 55 minutes while the phone is in the standby mode.

■ Switch the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or

danger.

Press and hold the power key as shown.

If the phone asks for a PIN or UPIN code, enter the code, and select OK.

You can switch on the phone in demo mode without a SIM card inserted. In this mode, all

bearer-independent features are available, and you can make emergency calls.

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time difference with

respect to Greenwich Mean Time (GMT), and enter the date. See Time and date p. 100.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to

get the configuration settings from your service provider (network service). Confirm or decline the query. See

Connect to serv. support in Configuration p. 110 and Configuration settings service p. 17.

■ Normal operating position

Use the phone only in its normal operating position.

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily

when the device is switched on. Contact with the antenna affects call quality and may

cause the device to operate at a higher power level than otherwise needed. Avoiding

contact with the antenna area when operating the device optimizes the antenna

performance and the battery life.

2. Your phone

■ Keys and parts

• Power key (1)

• Earpiece (2)

• Left, middle, and right selection keys (3)

• End key (4)

• 4-way navigation

key (5)

• Call key (6)

• Number keys (7)

• Push to talk key (8)

• Loudspeaker (9)

• Memory card slot (10)

• Charger connector (11)

• Enhancements

connector (12)

• Volume keys (13)

• Infrared (IR) port (14)

• Camera lens (15)

• Camera key (16)

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.

• 3G indicator (1)

• Signal strength of the cellular

network (2)

• Battery charge level (3)

• Indicators (4)

• The name of the network or the

operator logo (5)

• Clock (6)

• Display (7)

• The left selection key (8) is Go to or a shortcut to another function. See Left

selection key p. 101.

• The middle selection key (9) mode is Menu.

• The right selection key (10) may be Names to access the list of contacts in the Contacts menu, an

operatorspecific name to access an operatorspecific Web site, or a shortcut to a function that you selected.

See Right selection key p. 101.

Active standby

In the active standby mode, the phone can display separate content

item windows, such as shortcuts (1), audio functions (2), the calendar

(3), and a user note (4). To select whether active standby is shown, see

Active standby in Standby settings p. 99.

When active standby is idle, to access the menu structure, select Menu

(5). To access the features in active standby, press the navigation key up

or down.

To change the key to access the navigation mode, see Enabling active

standby in Standby settings p. 99. When the arrow indicators (6) are

shown, you can scroll the item left and right.

Content items in the navigation mode

Shortcut bar — To select a shortcut, scroll to the desired function, using

left/right navigation key, and select it.

To change or organize the shortcuts when in the navigation mode, select Options > Active standby > My active

standby > Options > Personalise > Options > Select links or Organise links.

Audio applications — To switch on the radio or the music player, scroll to and select it. To change a track in the

music player or a channel in the radio, scroll left or right. To start the radio channel search, scroll and hold left

or right.

Calendar — To view today’s notes, select the desired one. To view the notes for the previous or next days, scroll

left or right.

My note — To enter a note, select the content window, write your note, and save it.

Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is

shown.

General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default

group name and closed user group index. The date is shown if the calendar is not selected as active standby

content.

Standby mode shortcuts

• To access the list of dialed numbers, press the call key once. See Make a voice call p. 31.

• To call your voice mailbox (network service) when you have saved your voice mailbox number in the phone,

press and hold 1.

• To access video mail numbers, press and hold 2.

• To connect to a browser service, press and hold 0.

• To set shortcut functions for the navigation key, see Navigation key in My shortcuts p. 100.

• To change the profile, briefly press the power key to open the list of profiles. Scroll to the desired profile, and

select it.

Power saver

To set the power saving function On, see Power saver in Display p. 98.

Indicators

You have unread messages in the Inbox folder.

You have unsent, canceled, or failed messages in the Outbox folder.

The phone registered a missed call.

Your phone is connected to the instant messaging service, and the availability status is online or

offline.

You received one or several instant messages, and you are connected to the Instant messaging service.

The keypad is locked.

The phone does not ring for an incoming call or text message. See also Tones p. 98.

The alarm clock is set to On.

The countdown timer is running.

The stopwatch is running in the background.

The phone is registered to a GPRS, EGPRS, or WCDMA network.

A packet data connection is established.

The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing

call during a packet data dial-up connection.

When the infrared connection is activated, the indicator is shown continuously.

A Bluetooth connection is active.

If you have two phone lines, the second phone line is selected.

All incoming calls are diverted to another number.

The loudspeaker is activated, or the music stand is connected to the phone.

Calls are limited to a closed user group.

The timed profile is selected.

, or

A headset, handsfree, loopset, or music stand enhancement is connected to the phone.

A push to talk connection is active or suspended.

■ Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the

keypad; or select Lock.

To unlock the keypad select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, select

Unlock, press *, and enter the security code.

To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad

automatically locks.

For Automatic keyguard and Security keyguard, see Phone p. 109.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

3. Call functions

■ Make a voice call

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the + character replaces the international

access code), enter the country code, the area code without the leading 0, if necessary, and the phone

number.

2. To call the number, press the call key.

3. To end the call, or to cancel the call attempt, press the end key.

To search for a name or phone number that you have saved in Contacts, see Search for a contact p. 86. Press

the call key to call the number.

To access the list of phone numbers you have most recently called or attempted to call, in the standby mode,

press the call key once. To call the number, scroll to the number or name you want, and press the call key.

Speed dialing

Assign a phone number to one of the speed-dialing keys, 3 to 9. See Speed dials p. 89. Call the number in either

of the following ways:

• Press the speed-dialing key, then the call key.

• If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Call p. 108.

Enhanced voice dialing

To make a phone call, select and hold Names, and say the name of the contact you wish to call. The phone will

automatically associate a virtual voice tag with each contact in the phone memory.

Make a voice dialing call

If an application is sending or receiving data using a packet data connection, end the application before you

use voice dialing in GSM. In WCDMA it is possible to send voice and data simultaneously.

Voice commands are language-dependent. To set the language, see Voice playback language in Phone p. 109.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely

solely upon voice dialing in all circumstances.

1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is

displayed.

If you are using a compatible headset with the headset key, press and hold the headset key to start the voice

dialing.

2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The

phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials

the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.

Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice

commands in My shortcuts p. 100.

■ Answer or reject a voice call

To answer a call, press the call key.

To mute the ringing tone before you answer the call, select Silence.

To end the call or reject a call, press the end key.

Call waiting

During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call,

press the end key.

To activate the Call waiting function, see Call p. 108.

■ Options during a voice call

Many of the options that you use during a call are network services. For availability, contact your network

operator or service provider.

Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.Network

services options are Answer, Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the

following:

Send DTMF — to send tone strings

Swap — to switch between the active call and the call on hold

Transfer — to connect a call on hold to an active call and disconnect yourself

Conference — to make a conference call that allows up to five persons to take part in a conference call

Private call — to discuss privately in a conference call

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be

extremely loud.

■ Make a video call

When you make a video call, you send a real-time video to the recipient of the call. The video image captured

by the camera on the back of your phone is shown to the video call recipient. This phone does not have a front

camera.

To be able to make a video call, you must have a USIM card and be connected in a WCDMA network. For

availability of and subscription to video call services, contact your network operator or service provider. A video

call can only be made between two parties. The video call can be made to a compatible phone or an ISDN client.

Video calls cannot be made while another voice, video, or data call is active.

1. To start a video call, enter the phone number in the standby mode, or select Contacts and a contact.

2. Press and hold the call key, or select Options > Video call.

Starting a video call may take a while. Video call and an outgoing animation is shown. If the call is not

successful (for example, video calls are not supported by the network, or the receiving device is not

compatible) you are asked if you want to try a normal call or send a message instead.

Tip: To increase or decrease the volume during a call, press the volume keys.

The video call is active when you can see two video images and hear the sound through the

loudspeaker. The call recipient may deny the video sending, in which case you may see a still image or a grey

background graphic. You will hear the sound.

3. To end the call, press the end key.

■ Answer or reject a video call

When a video call arrives, Video Call is displayed.

1. Press the call key to answer the video call. Allow video image to be sent to caller? is displayed.

If you select Yes, the image being captured by the camera in your phone is shown to the caller. If you select

No, or do nothing, video sending is not activated, and you hear a sound. A graphic is displayed on top of the

video, indicating that it is not sent. You can enable or disable video sending at any time during the video

call.

2. To end the video call, press the end key.

Even when you deny video sending during a video call, the call is still charged as a video call. Check the pricing

with your network operator or service provider.

■ Options during a video call

Select Options during a video call for the following options: Set contrast, Video motion, Switch to voice, End

call, Send DTMF, and Loudspeaker.

4. Write text

To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional

text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input

you can enter a letter with a single keypress.

When you write text,

appears, indicating traditional text input.

indicating the character case. To change the character case, press #.

appears at the top left of the display, indicating predictive text input, and

, or

appears next to the text input indicator,

indicates number mode. To change

from the letter to number mode, press and hold #, and select Number mode.

■ Settings

To set the writing language while writing text, select Options > Writing language.

When writing text, select Options > Prediction .

To set predictive text input on or revert to traditional text input, select Prediction > On or Off.

indicated with

To select the prediction type, select Prediction type > Normal . When you select Normal,

the phone predicts the word on the basis of the characters you enter.

Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold

Options.

■ Predictive text input

Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary.

1. To start writing a word, use the 2 to 9 keys. Press each key only once for one letter. The phone displays * or

the letter if it separately has a meaning as a word. The entered letters are displayed underlined.

To insert a special character, press and hold *, or select Options > Insert symbol. Scroll to a character, and

select Use.

2. When you finish writing the word and it is correct, to confirm it, press 0 to add space.

If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want

appears, select Use.

If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add

the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.

■ Traditional text input

Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a

number key are printed on the key. The characters that are available depend on the selected writing language.

See Settings p. 36.

If the next letter you want is located on the same key as the present one, wait until the cursor appears; or

briefly press any of the navigation keys, and enter the letter.

The most common punctuation marks and special characters are available under the 1 key. For more

characters, press *.

5. Navigate the menus

The phone offers you an extensive range of functions, that are grouped into menus.

1. To access the menu, select Menu.

To change the menu view, select Options > Main menu view > List, Grid, Grid with labels or Tab.

To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll

to where you want to move the menu, and select OK. To save the change, select Done > Yes.

2. Scroll through the menu, and select an option (for example, Settings).

3. If the selected menu contains further submenus, select the one that you want (for example, Call).

4. If the selected menu contains further submenus, repeat step 3.

5. Select the setting of your choice.

6. To return to the previous menu level, select Back. To exit the menu, select Exit.

The menus, submenus, and setting options are numbered. To access some of them, use their shortcut number.

To access the menu, select Menu. Enter quickly, within 2 seconds, the shortcut number of the menu function

you want to access. To access the menu functions in menu level 1, enter 0 and 1.

6. Media

■ Camera

You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures

in .jpg format and video clips in .3gp format, and you can digitally zoom up to eight times.

Take a photo

1. To open the camera viewfinder, select Menu > Media > Camera.

If Video is selected as the default mode, select Options > Still image.

To zoom in or out, press the volume key up or down, or the left/right navigation key.

To take up to four photos in quick succession, select Options > Img. sequence on. The higher the resolution,

the fewer photos you can take sequentially.

2. To take a photo, press the camera key, or select Capture.

The phone saves the photo in My Items > Images unless you set the phone

to use the memory card

for saving the photos.

3. To take another photo, press the camera key after the photo saving indicator

stops moving. To send the photo as a multimedia message, select Options >

Send.

Tip: To activate the camera, press the camera key. To activate video, press and hold the camera key.

This device supports an image capture resolution of 1600 x 1200 pixels. The image resolution in these materials

may appear different.

Record a video clip

Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume

the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in My Items >

Video clips. To change the folder for saving the recordings, see Camera settings p. 40.

Camera settings

Select Menu > Media > Camera > Options > Settings. You can define Image quality, Image size, Video clip

quality, Video clip length, Camera sounds, Default title, Image and video storage, and Default mode. In Image

and video storage you can select the folder or memory card to save your photos and video clips.

This device supports the following video sizes: SubQCIF, QCIF, CIF, and VGA.

■ Media player

With the media player you can view, play, and download files, such as images, audio, video, and animated

images. You can also view compatible streaming videos from a network server (network service).

Select Menu > Media > Media player > Open My Items, Bookmarks, Go to address, or Media downloads.

Progressive download

Progressive download allows you to watch a video while it is being downloaded and saved in the background.

Playback starts immediately when enough data has been buffered.

Select Menu > Media > Media player > Open My Items, Bookmarks, Go to address, or Media downloads.

To learn more about accessing videos see Download content and applications p. 17.

Set up the phone for a streaming service

You may receive the configuration settings required for streaming as a configuration message from the

network operator or service provider. See Configuration settings service p. 17. You can also enter the settings

manually. See Configuration p. 110.

To activate the settings, do the following:

1. Select Menu > Media > Media player > Streaming settings > Configuration

2. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal

configuration for streaming.

3. Select Account and a streaming service account contained in the active configuration settings.

■ Music player

Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .aac format

sound files that you have transferred to the phone with the Nokia Audio Manager application. .mp3 and .aac

format files are stored in the memory card or in the My Items folders. Music files saved in the Music files folder

and in another location, such as a folder of the memory card, are automatically detected and added to the

default track list.

Play the music tracks transferred to the phone

1. Select Menu > Media > Music player. The details of the first track on the default track list are shown.

To use the graphical keys

it.

, or

on the display, scroll left or right to the desired key, and select

2. To play a track, scroll to the track that you want, and select

To adjust the volume level, use the volume keys on the side of the phone.

To skip to the beginning of the next track, select

twice.

. To skip to the beginning of the previous track, select

To rewind the current track, select and hold

Release the key at the position you want.

. To fast forward the current track, select and hold

3. To stop the playing, select

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do

not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Music player settings

In the Music player menu, the following options may be available:

Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection

Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select

Play.

Select Options > Refresh all tracks or Change track list to refresh the track list (for example, after adding new

tracks to the list) or to change the track list that is shown when you open the Music player menu, if several

track lists are available in the phone.

Play options > Random > On — to play the tracks in the track list in random order. Select Repeat > Current

track or All tracks to play the current track or the entire track list repeatedly.

Media equaliser — to open the list of media equalizer sets. See Equalizer p. 45.

Loudspeaker or Headset — to listen to the music player through the loudspeaker or a compatible headset

connected to the phone

Tip: When using a headset, to skip to the next track, press the headset key.

Send — to send the selected file using MMS, Bluetooth wireless technology, or an infrared connection

Music downloads — to connect to a browser service related to the current track. This function is only available

when the address of the service is included in the track.

Memory status — to view the free and used memory capacity

■ Radio

The FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs

to be attached to the device for the FM radio to function properly.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do

not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Select Menu > Media > Radio.

To use the graphical keys

select it.

, or

on the display, scroll left or right to the desired key, and

Save radio channels

1. To start the channel search, select and hold

or . To change the radio frequency in 0.05 MHz steps,

briefly press or

2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key. To save the

channel to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key,

0 to 9.

3. Enter the name of the channel, and select OK.

Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel, select

, or press the headset key. To

select a radio channel location, briefly press the corresponding number keys. To adjust the volume, press the

volume keys.

Select from the following options:

Switch off — to turn off the radio

Save station — to enter a channel name and save the new channel

Visual Radio — to set whether the Visual Radio application is used. Some radio channels may send text or

graphical information that you can view using the Visual Radio application.

Note: This feature may not be available in your product due to your subscription (network service).

Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio

application starts automatically when you turn on the radio, select Enable visual service > Automatically.

Stations — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and

select Options > Delete station or Rename.

Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo

Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset connected

to the phone. The lead of the headset functions as the radio antenna.

Set frequency — to enter the frequency of the desired radio channel

You can normally make a call or answer an incoming call while listening to the radio. During the call, the

volume of the radio is muted.

When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere

with the radio.

■ Voice recorder

You can record pieces of speech, sound, or an active call, and save them in My Items or a memory card. This is

useful when recording a name and phone number to write down later.

The recorder cannot be used when a data call or GPRS connection is active.

Record sound

1. Select Menu > Media > Voice recorder.

To use the graphical keys

, or

on the display, scroll left or right to the desired key, and select it.

2. To start the recording, select . To start the recording during a call, select Options > Record. While

recording a call, all parties to the call hear a faint beeping sound about every 5 seconds. When recording a

call, hold the phone in the normal position near to your ear.

3. To end the recording, select

. The recording is saved in My Items > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using infrared, Bluetooth wireless technology, or a multimedia message, select

Options > Send last recorded.

List of recordings

Select Menu > Media > Voice recorder > Options > Recordings list. The list of folders in the My Items is shown.

Open Recordings to see the list with recordings. Select Options to select options for files in the My Items. See

My Items p. 80.

Define a storage folder

To use another folder than Recordings as the default folder in My Items, select Menu > Media > Voice

recorder > Options > Select memory. Scroll to a folder, and select Set.

■ Equalizer

You can control the sound quality when using the music player by amplifying or diminishing frequency bands.

Select Menu > Media > Equaliser.

To activate a set, scroll to one of the equalizer sets, and select Activate.

To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or

renamed.

7. Web

You can access various mobile Internet services with your phone browser.

Important: Use only services that you trust and that offer adequate security and protection against harmful

software.

Check the availability of these services, pricing, tariffs, and instructions with your service provider.

With the phone browser you can view the services that use wireless markup language (WML) or extensible

hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size. You may not be

able to view all details of the Internet pages.

■ Basic steps to access and use services

1. Save the service settings that are required to access the service that you want to use. See Set up browsing

p. 46.

2. Make a connection to the service. See Connect to a service p. 47.

3. Start browsing the pages of the service. See Browse pages p. 47.

4. When you finish browsing, end the connection to the service. To disconnect, see Options while browsing

p. 48.

■ Set up browsing

You may receive the configuration settings required for browsing as a configuration message from the network

operator or service provider that offers the service that you want to use. See Configuration settings service

p. 17. You can also enter all the configuration settings manually. See Configuration p. 110.

■ Connect to a service

First, ensure that the correct configuration settings of the service that you want to use are activated.

1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings.

2. Select Configuration. Only the configurations that support browsing service are shown. Select a service

provider, Default, or Personal configuration for browsing. See Set up browsing p. 46.

3. Select Account and a browsing service account contained in the active configuration settings.

4. Select Display terminal window > Yes to perform manual user authentication for intranet connections.

Secondly, make a connection to the service in one of the following ways:

• Select Menu > Web > Home; or in the standby mode, press and hold 0.

• To select a bookmark of the service, select Menu > Web > Bookmarks.

• To select the last URL, select Menu > Web > Last web address.

• To enter the address of the service, select Menu > Web > Go to address. Enter the address of the service,

and select OK.

■ Browse pages

After you make a connection to the service, you can start browsing its pages. The function of the phone keys

may vary in different services. Follow the text guides on the phone display. For more information, contact your

service provider.

If packet data is selected as the data bearer,

is shown on the top left of the display during browsing. If you

receive a call or a text message, or make a call during a packet data connection, is shown on the top right of

the display to indicate that the packet data connection is suspended (on hold). After a call the phone tries to

reconnect the packet data connection.

Browse with phone keys

To browse through the page, scroll in any direction.

To select a highlighted item, press the call key, or select Select.

To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *.

Options while browsing

Select from the following options:

Home — to return to your start page

Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page

contains shortcuts.

Add bookmark — to save the page as a bookmark

Bookmarks — to access the list of bookmarks. See Bookmarks p. 49.

Page options — to show the list of options for the active page

History — to get a list showing the last visited URLs

Other options — to show a list of other options

Reload — to reload and update the current page

Quit — to disconnect from a service

The service provider may also offer other options.

Direct calling

The browser supports functions that you can access while browsing. You can make a phone call, send DTMF

tones while a voice call is in progress, and save a name and a phone number from a page.

■ Bookmarks

You can save page addresses as bookmarks in the phone memory.

1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.

2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with

the bookmark.

3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the

bookmark to a folder.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these

sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any

Internet site.

Receive a bookmark

When you have received a bookmark that is sent as a bookmark,

1 bookmark received is displayed. To save the bookmark, select Show > Save. To view or delete the bookmark,

select Options > View or Delete. To discard the bookmark directly after you have received the bookmark, select

Exit > OK.

■ Appearance settings

While browsing, select Options > Other options > Appearance settings, or in the standby mode, select Menu >

Web > Settings > Appearance settings and from the following options:

Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is

abbreviated.

Font size > Extra small, Small, or Medium — to set the font size

Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of

pictures.

Alerts > Alert for unsecure conn. > Yes — to set the phone to alert when a secure connection changes to an

unsecure one during browsing

Alerts > Alert for unsecure items > Yes — to set the phone to alert when a secure page contains an unsecure

item. These alerts do not guarantee a secure connection. For more information, see Browser security p. 52.

Character encoding > Content encoding — to select the encoding for the browser page content

Character encoding > Unicode (UTF-8) web add. > On — to set the phone to send a URL as a UTF-8 encoding.

You may need this setting when you access a Web page created in foreign language.

Screen size > Full or Small — to set the screen layout

JavaScript > Enable — to enable the Java scripts

■ Security settings

A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the

cache memory. See Cache memory p. 52.

While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select

Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies,

select Allow or Reject.

Scripts over secure connection

You can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.

While browsing, to allow the scripts, select Options > Other options > Security > WMLScript settings; or in the

standby mode, select Menu > Web > Settings > Security settings > WMLScripts in sec. conn. > Allow.

■ Download settings

To automatically save all downloaded files in My Items, select Menu > Web > Settings > Downloading

settings > Automatic saving > On.

■ Service inbox

The phone is able to receive service messages (pushed messages) sent by your service provider (network

service). Service messages are notifications (for example, news headlines), and they may contain a text

message or an address of a service.

To access the Service inbox in the standby mode, when you have received a service message, select Show. If you

select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web >

Service inbox.

To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the

message you want, and to activate the browser and download the marked content, select Retrieve. To display

detailed information on the service notification or to delete the message, select Options > Details or Delete.

Service inbox settings

Select Menu > Web > Settings > Service inbox settings.

To set whether you want to receive service messages, select Service messages > On or Off.

To set the phone to receive service messages only from content authors approved by the service provider, select

Message filter > On. To view the list of the approved content authors, select Trusted channels.

To set the phone to automatically activate the browser from the standby mode when the phone has received a

service message, select Automatic connection > On. If you select Off, the phone activates the browser only

after you select Retrieve when the phone has received a service message.

■ Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential

information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in

the cache.

To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode,

select Menu > Web > Clear the cache.

■ Browser security

Security features may be required for some services, such as online banking or shopping. For such connections

you need security certificates and possibly a security module, which may be available on your SIM card. For

more information, contact your service provider.

Security module

The security module improves security services for applications requiring a browser connection, and allows you

to use a digital signature. The security module may contain certificates as well as private and public keys. The

certificates are saved in the security module by the service provider.

To view or change the security module settings, select Menu > Settings > Security > Security module settings.

Certificates

Important: Even if the use of certificates makes the risks involved in remote connections and software installation

considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a

certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or

trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired

certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date

and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and

that the certificate really belongs to the listed owner.

There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may

receive these certificates from your service provider. Authority certificates and user certificates may also be

saved in the security module by the service provider.

To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings >

Security > Authority certificates or User certificates.

is displayed during a connection, if the data transmission between the phone and the content server is

encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where

the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the

content server.

Digital signature

You can make digital signatures with your phone if your SIM card has a security module. Using the digital

signature can be the same as signing your name to a paper bill, contract, or other document.

To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its

price. The text to sign is shown, which may include the amount and date.

Check that the header text is Read and that the digital signature icon

is shown.

If the digital signature icon does not appear, there is a security breach, and you should not enter any personal

data such as your signing PIN.

To sign the text, read all of the text first, and select Sign.

The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before

signing.

Select the user certificate you want to use. Enter the signing PIN (see Access codes p. 16), and select OK. The

digital signature icon disappears, and the service may display a confirmation of your purchase.

8. Applications (Apps.)

■ Games

The microSD card of your phone may contain games.

Launch a game

Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key.

For options related to a game, see Application options p. 55.

Game downloads

Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is

shown; see Bookmarks p. 49.

Important: Only install and use applications and other software from sources that offer adequate security and

protection against harmful software.

Game settings

To set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings.

■ Collection

Your phone software includes some Java applications.

Launch an application

Select Menu > Applications > Collection. Scroll to an application, and select Open, or press the call key.

Application options

Delete — to delete the application from the phone

Details — to give additional information about the application

Update version — to check if a new version of the application is available for download from Web (network

service)

Web page — to provide further information or additional data for the application from an Internet page

(network service). It is only shown if an Internet address has been provided with the application.

Application access — to restrict the application from accessing the network. Different categories are shown.

Select in each category one of the available permissions.

Download an application

Your phone supports J2MEä Java applications. Make sure that the application is compatible with your phone

before downloading it.

Important: Only install and use applications and other software from sources that offer adequate security and

protection against harmful software.

You can download new Java applications in different ways:

• Select Menu > Applications > Options > Downloads > Application downloads, and the list of available

bookmarks is shown. See Bookmarks p. 49.

For the availability of different services, pricing, and tariffs, contact your service provider.

• Use the game download function. See Game downloads p. 54.

• Use the Nokia Application Installer from Nokia PC Suite to download the applications to your phone.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these

sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any

Internet site.

■ Presenter

The Presenter application is compatible with Microsoft Office PowerPoint and enables you to control slide

presentations, a software DVD, an MP3 player, or other PC applications remotely from your device.

To use applications other than slide presentations and desktop mode, you must create a corresponding custom

profile on the PC application.

Before you can use the application you must do the following:

1. Install the Nokia Presenter PC application on your PC. (This component is included in the software package,

but is also available for download on the Noka Web site.)

2. Launch and configure the PC component. Make sure that the selected incoming Bluetooth serial port (COM

port) corresponds to the one defined in the Bluetooth software settings on the Bluetooth device of your PC.

For details, refer to the PC component documentation and Set up a Bluetooth connection p. 103.

3. Open the slide presentation, or start the application you want to control remotely from your phone.

Select Applications > Collection > Presenter > Connect and the device you want to connect to.

When the Bluetooth Connection Successful dialog appears on your PC screen, you must click on it to confirm

the Bluetooth connection.

The list of available application types is displayed. Select Open to access the desired application. Select

Options > Settings to set the Font size for the speaker notes, and Timer (in minutes) to optimize the slide

presentation time available. To save the settings, select Options > Back.

After you have select the slide presentation you browse or skip slides, or jump ahead, by using the 4-way

navigation key. To view your speaker notes, select Notes. To point things out on the slides, select Pointer to

activate a small black round marker, that you control with the 4-way navigation key. Select Options > Slide list

to return to the slide list. Select Options > Application list to return to the list of applications.

To control the mouse pointer (the cursor) remotely from the phone, select the desktop mode. After you open

the desktop, the phone automatically controls your mouse pointer. To return to the list of applications, select

Options > Application list.

To quit the Presenter, select Options > Exit.

9. Push To Talk (PTT)

Note: This feature may not be available in your product due to your subscription

(network service).

Push To Talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network

service). PTT provides direct voice communication. To connect, press the PTT key.

You can use PTT to have a conversation with one person or with a group of people having compatible devices.

When your call is connected, the people you are calling do not have to answer the phone. The participants

should confirm the reception of any communication where appropriate, as there is no other confirmation

whether the recipients have heard the call.

To check availability and costs, and to subscribe to the service, contact your network operator or service

provider. Roaming services may be more limited than for normal calls.

Before you can use the PTT service, you must define the required PTT service settings. See PTT settings p. 63.

While you are connected to the PTT service, you can use the other functions of the phone. The PTT service is not

connected to traditional voice communication; therefore many of the services available for traditional voice

calls (for example, voice mailbox) are not available for PTT communication.

■ Connect to the PTT service

To connect to the PTT service, select Menu > Push To Talk > Switch PTT on. indicates the PTT connection.

indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service

until you disconnect from the PTT service. If you have added channels to the phone, you are automatically

joined to the active channels, and if you have selected a contact, phonebook group or channel as the default

action for the PTT-key, then the name of the selected item is displayed in the standby mode.

To disconnect from the PTT service, select Switch PTT off.

■ Make and receive a PTT call

Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you

can use the phone normally, by holding it to your ear.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be

extremely loud.

When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls.

One-to-one calls are calls you make to only one person.

Press and hold the PTT key the entire time you are talking, and hold the phone in front of you so that you can

see the display. When you are finished, release the PTT key. Talking is allowed on a firstcome, firstserved basis.

When someone stops talking, the first person to press the PTT key can talk next.

To check the login status of your contacts, select Menu > Push To Talk > Contacts list. This service depends on

your network operator or service provider and is only available for subscribed contacts.

, or

indicate

that the contact is available, not logged into the PTT service, or unknown. indicates that the contact does

not want to be disturbed. You cannot call the contact, but you can send a callback request.

To subscribe a contact, select Options > Subscribe contact, or if one or more contacts are marked, select

Subscribe marked.

Make a channel or a group call

To make a call to a channel, select Channel list in the PTT menu, scroll to the desired channel, and press the PTT

key.

To make a group call from Contacts, the recipients must be connected to the PTT service. Select Menu >

Contacts > Groups, scroll to the desired group, and press the PTT key.

Make a one-to-one call

To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list.

Scroll to a contact, and press the PTT key.

You can also select the contact from Contacts.

To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel.

Select Members, scroll to the desired contact, and press the PTT key.

To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to

the desired contact, and press the PTT key.

Make a PTT call to multiple recipients

You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must

accept the call to participate.

Select Menu > Push To Talk > Contacts list, and mark the desired contacts. To make the call, press the PTT key.

The contacts who accept the call are shown.

Receive a PTT call

A short tone notifies you of an incoming PTT call. Information such as the channel name or the nickname

(network service) of the caller is displayed.

If you have set the phone to first notify you of one-to-one calls, accept or reject the call.

If you press the PTT key to try to respond to a call while another member is talking, you hear a tone, and

Queuing is displayed as long as you press the PTT key. Press and hold the PTT key, and wait for the other person

to finish; then you can talk.

■ Callback requests

If you make a one-to-one call and do not get a response, you can send a request for the person to call you back.

Send a callback request

You can send a callback request in the following ways:

• To send a callback request from the contacts list in the PTT menu, select Contacts list. Scroll to a contact,

and select Options > Send callback.

• To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT

address, and select Options > Send callback.

• To send a callback request from the channel list in the Push To Talk menu, select Channel list, and scroll to

the desired channel. Select Members, scroll to the desired contact, and select Options > Send callback.

• To send a callback request from the callback request list in the Push To Talk menu, select Callback inbox.

Scroll to a contact, and select Options > Send callback.

Respond to a callback request

When you receive a callback request, Callback request received is shown in the standby mode. Select View. The

list of contacts who have sent you callback requests is shown.

To make a one-to-one call, press the PTT key.

To send a call request back to the sender, select Options > Send callback.

To delete the request, select Delete.

To view the sender's PTT address, select View.

To save a new contact or to add the PTT address to a contact, select Options > Save as or Add to contact.

■ Add a one-to-one contact

You can save the names of persons to whom you often make one-to-one calls in the following ways:

• To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options >

Add detail > Push To Talk address.

• To add a contact to the PTT contacts list, select Menu > Push To Talk > Contacts list > Options > Add

contact.

• To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the

desired channel. Select Members, scroll to the member whose contact information you want to save, and

select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add

to contact.

■ PTT channels

When you call a channel, all members joined to the channel hear the call simultaneously.

There are three types of PTT channels:

• Provisioned channel — A permanent channel is created by the service provider.

•

Public — Every channel member can invite other persons.

Private — Only persons who receive an invitation from the channel creator can join in.

Add a channel

To add a public or private channel, select Menu > Push To Talk > Add channel, and edit the settings in the form

fields:

Channel status: — Select Active or Inactive.

Nickname in channel: — Enter your nickname for the channel.

Channel security: — Select Public group or Private group.

To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a

text message or infrared.

To add a channel by entering the channel address manually, select Menu > Push To Talk > Add channel >

Options > Edit address manually. Enter the channel address provided by your service provider.

Receive an invitation

When you receive an invitation to a group, Channel invitation received: is displayed.

1. To view the contact who sent the invitation and the channel address if the group is not a private channel,

select View.

2. To add the channel to your phone, select Save.

3. To set the status for the channel, select Active or Inactive.

To reject the invitation, select View > Discard > Yes.

■ PTT settings

There are two kinds of PTT settings: settings for connecting to the service and settings for use.

You may receive the settings for connecting to the service from your network operator or service provider. See

Configuration settings service p. 17. You can enter the settings manually. See Configuration p. 110.

To select the settings for connecting to the service, select Menu > Push To Talk > Configuration sett. and from

the following options:

Configuration — to select a service provider, Default, or Personal configuration for PTT service. Only the

configurations that support the PTT service are shown.

Account — to select a PTT service account in the active configuration settings

You can also select from the following options: Push To Talk user name, Default nickname, Push To Talk

password, Domain, and Server address.

To edit the PTT settings for use, select Menu > Push To Talk > PTT settings, and from the following options:

1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls. To make but not receive

one-to-one calls, select Off. The service provider may offer some services that override these settings. To set

the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.

PTT key default function is used to select the default action of the PTT-key. It can be set to opening the

Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other

contact, group or channel is highlighted) to a contact, channel or group.

Show my login status > Yes — to enable the sending of the login status

PTT status in startup >Yes > or Ask first — to set the phone to automatically connect to the PTT service when

you switch on the phone

PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network

Send my PTT address > No — to hide your PTT address from calls

10. Messaging

You can read, write, send, and save text, multimedia, email, audio, and flash messages. All messages are

organized into folders.

■ Text messages (SMS)

With the short message service (SMS) you can send and receive text messages (network service).

Before you can send any text or SMS email message, you must save your message center number. See Message

settings p. 76.

To check SMS email service availability and to subscribe to the service, contact your service provider. To save an

email address in Contacts, see Save numbers and text items p. 86.

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages is sent

as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other

marks, and characters from some language options like Chinese, take up more space limiting the number of characters that

can be sent in a single message.

At the top of the display, you can see the message length indicator counting backwards from the maximum

number of characters supported by the phone.

Write and send SMS messages

1. Select Menu > Messaging > Create message > Text message.

2. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. Scroll right to add

new contacts manually in the To: field. To send the message to persons in a group, select Contact group and

the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently

used.

3. Scroll down, and write your message in the Message: field. See Write text p. 36.

To insert a template into the message, select Options > Use template.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

Read and reply to an SMS message

1 message received or the number of new messages with messages received are shown when you have received

a message.

1. To view a new message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select

the message you want to read.

is shown if you have unread messages in Inbox.

2. To view the list of available options while reading a message, select Options. You can, for example, select to

copy text from the beginning of a message to your phone calendar as a reminder note.

3. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message.

To send a text message to an e-mail address, enter the e-mail address in the To: field.

Scroll down, and write your message in the Message: field. See Write text p. 36.

If you want to change the message type for your reply message, select Options > Change message type.

4. To send the message, select Send; or press the call key.

■ SIM messages

SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the

phone memory, but not vice versa. Received messages are saved to the phone memory.

To read SIM messages, select Menu > Messaging > Options > SIM messages.

■ Multimedia messages

Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of

a message may vary depending on the receiving device.

To check availability and to subscribe to the multimedia messaging network service, contact your network

operator or service provider. See Multimedia message p. 77.

A multimedia message can contain text, sound, pictures, video clips, a business card, and a calendar note. If the

message is too large, the phone may not be able to receive it. Some networks allow text messages that include

an Internet address where you can view the multimedia message.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF and WBMP

• Sound: AMR audio

• Video clip: .3gp format with H.263 or MPEG video (QCIF resolution), WB or AMR audio

• Other: vCard (Business card) and vCalendar (Calendar note)

The phone may not support all variations of the file formats.

You can receive multimedia messages during a call, another Java application, or an active browsing session

over WCDMA data.

Write and send a multimedia message

The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it

smaller so that it can be sent by MMS.

1. Select Menu > Messaging > Create message > Multimedia.

2. Enter your message.

Your phone supports multimedia messages that contain several pages (slides). A message can contain a

calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip;

or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide.

To insert a file in the message, select Insert or Options > Insert.

You can fetch images and video clips from the My Items, or to take them directly from the viewfinder, select

Options > Insert > New Image or New video clip.

3. To view the message before sending it, select Options > Preview.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the

message to persons in a group, select Contact group and the desired group. To retrieve the contacts to

which you recently sent messages, select Add > Recently used.

Send a message

modified, transferred, or forwarded.

When you finish writing your message, to send the message, select Send, or press the call key. The phone saves

the message in the Outbox folder, and sending starts. If you select Save sent messages > Yes, the sent message

is saved in the Sent items folder. See General p. 76.

Note: When the phone sends the message, the animated

is shown. This is an indication that the message has

been sent by your device to the message center number programmed into your device. This is not an indication that

the message has been received at the intended destination. For more details about messaging services, check with

your service provider.

It takes more time to send a multimedia message than to send a text message. While the message is being sent,

you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone

tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You

can try to resend it later.

Cancel message sending

When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed.

To cancel the text message sending, select Cancel.

To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and

select Options > Cancel sending.

Read and reply to a multimedia message

Important: Exercise caution when opening messages. Multimedia message objects may contain malicious

software or otherwise be harmful to your device or PC.

Multimedia message received or the number of new messages with messages received is shown when you

receive a new multimedia message.

1. To read the message, select Show. To view it later, select Exit.

To read the message later, select Menu > Messaging > Inbox. Scroll to the message that you want to view,

and select it.

is shown if you have unread messages in Inbox.

2. To view the whole message if the received message contains a presentation, select Play.

To view the files in the presentation or the attachments, select Options > Objects or Attachments.

3. To reply to the message, select Options > Reply > Text message, Multimedia, Flash message, or Audio

message. Write the reply message.

If you want to change the message type for your reply message, select Options > Change message type. The

new message type may not support all the content that you have added.

4. To send the message, select Send; or press the call key. See Send a message p. 68.

■ Memory full

When you are receiving a message, and the memory for the messages is full, Memory full, not possible to

receive message(s) is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired

message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want

to delete, and select Options > Delete marked.

To free phone memory, delete photos, ringing tones, or other data in the phone memory.

■ Folders

The phone saves received messages in the Inbox folder.

Messages that have not yet been sent are saved in the Outbox folder.

To set the phone to save the sent messages in the Sent items folder, see Save sent messages in General p. 76.

To save the message that you are writing and want to send later in the Drafts folder, select Menu >

Messaging > Drafts.

You can move your messages to the Saved items folder. To organize your Saved items subfolders, select

Menu > Messaging > Saved items > Saved messages or a folder that you add. To add a new folder for your

messages, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select

Options > Delete folder or Rename folder.

Your phone has templates. To create a new template, save or copy a message as a template. To access the

template list, select Menu > Messaging > Saved items > Templates.

■ Flash messages

Flash messages are text messages that are instantly displayed upon reception. Flash messages are not

automatically saved.

Write a flash message

Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To:

field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To

send the message, select Send.

Receive a flash message

A received flash message is indicated with Message: and a few words from the beginning of the message. To

read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the

current message, select Options > Use detail.

■ Audio messages

Note: This feature may not be available in your product due to your subscription (network service).

With this menu, use the multimedia message service to create and send a voice message in a convenient way.

Multimedia messaging service must be activated before you can use audio messages.

Create an audio message

1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see

Voice recorder p. 44.

2. To view the available options, select Options.

3. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add >

Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the

message to persons in a group, select Contact group and the desired group. To retrieve the contacts to

which you recently sent messages, select Add > Recently used.

4. To send the message, select Send.

Receive an audio message

When your phone receives audio messages, the number of messages and the text messages received is shown.

To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the

message later, select Exit. Select Options to see the available options.

■ Email application

The email application uses a packet data connection (network service) to allow you to access your email

account from your phone when you are not in the office or at home. This email application is different from the

SMS email function. To use the email function on your phone, you need a compatible email system.

You can write, send, and read email with your phone. You can also save and delete the email on a compatible

PC. Your phone supports POP3 and IMAP4 email servers.

Before you can send and retrieve any email messages, you must do the following:

• Obtain a new email account or use your current account. To check the availability of your email account,

contact your email service provider.

• Check your email settings with your network operator or email service provider. You may receive the email

configuration settings as a configuration message. See Configuration settings service p. 17. You can also

enter the settings manually. See Configuration p. 110.

To activate the email settings, select Menu > Messaging > Message settings > Email messages. See Email

p. 78.

This application does not support keypad tones.

Settings Wizard

The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings

manually, select Menu > Messaging > Email > Options > Manage accounts > Options > New.

The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you

have defined the correct preferred access point for your operator. See Configuration p. 110.

The e-mail application requires an Internet access point without a proxy. WAP access points normally include a

proxy and do not work with the e-mail application.

Write and send an email

You can write your email message before connecting to the email service; or connect to the service first, then

write and send your email.

1. Select Menu > Messaging > Email > Create e-mail.

2. If more than one e-mail account is defined, select the account from which you want to send the e-mail.

3. Enter the recipient’s email address.

4. Write a subject for the email.

5. Write the email message. See Write text p. 36.

To attach a file to the email, select Options > Attach and a file from My Items.

6. To send the email message immediately, select Send > Send now.

To save the email in the Outbox folder to be sent later, select Send > Send later.

To edit or continue writing your email later, select Options > Save draft. The email is saved in Outboxes >

Drafts.

To send the email later, select Menu > Messaging > Email > Options > Send now or Send and check e-mail.

Download email

1. To download email messages that have been sent to your email account, select Menu > Messaging >

Email > Check for new e-mail.

If more than one e-mail account is defined, select the account from which you want to download the email.

The e-mail application only downloads e-mail headers at first.

2. Select Back.

3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-

mail message.

To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select

Options > Send and check e-mail

Read and reply to email

Important: Exercise caution when opening messages. E-mail messages may contain malicious software or

otherwise be harmful to your device or PC.

1.Select Menu > Messaging > Email > Inboxes, the account name, and the desired message.

2. While reading the message, select Options to view the available options.

3. To reply to an email, select Reply > Original text or Empty screen. To reply to many, select Options > Reply

to all. Confirm or edit the email address and subject, then write your reply.

4. To send the message, select Send > Send now.

E-mail folders

Your phone saves email that you have downloaded from your email account in the Inboxes folder. The Inboxes

folder contains the following folders: “Account name” for incoming email, Archive for archiving email, Custom

1—Custom 3 for sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished email,

Outbox for saving email that has not been sent, and Sent items for saving email that has been sent.

To manage the folders and their email content, select Options to view the available options of each folder.

Spam filter

The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select

Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific

senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and White

list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in

the Inboxes folder and Options > Blacklist sender.

■ Voice messages

The voice mailbox is a network service, and you may need to subscribe to it. For more information and for your

voice mailbox number, contact your service provider.

To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter,

find, or edit your voice mailbox number, select Voice mailbox number.

If supported by the network,

indicates new voice messages. To call your voice mailbox number, select

Listen.

■ Info messages

With the Info messages network service, you can receive messages on various topics from your service provider.

To check availability, topics, and the relevant topic numbers, contact your service provider.

■ Service commands

Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD

commands), such as activation commands for network services, to your service provider.

■ Delete messages

To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from

which you want to delete messages. Scroll to the desired message, and select Delete. To mark more than one

message, select Options > Mark. Mark all the messages you want to delete, and select Options > Delete

marked.

To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder to

delete. Depending on the folder, the phone asks if you want to delete the messages.

To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Yes.

■ Message settings

General

General settings are common for text and multimedia messages.

Select Menu > Messaging > Message settings > General settings and from the following options:

Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder

Overwriting in sent items — to select whether overwriting is allowed when messages are sent and the memory

is full

Font size — to select the font size used in messages

Graphical smileys > Yes — to set the phone to replace character-based smileys with graphical ones

Text message and SMS email

The text message settings affect the sending, receiving, and viewing of messages.

Select Menu > Messaging > Message settings > Text messages and from the following options:

Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)

Message centres > Add centre — to set the phone number and name of the message center that is required for

sending text messages. You receive this number from your service provider. If you select SIM message centre,

you can view the SIM message center information.

Message centre in use — to select the message center in use

E-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending

SMS e-mail. If you select SIM email centre, you can view the SIM e-mail center information.

E-mail centre in use — to select the SMS e-mail message center in use

Message validity — to select the length of time for which the network attempts to deliver your message

Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service)

Use packet data > Yes — to set GPRS or WCDMA as the preferred SMS bearer

Character support > Full — to select all characters in the messages to be sent as viewed

Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message

center (network service)

Multimedia message

The message settings affect the sending, receiving, and viewing of multimedia messages.

You may receive the configuration settings for multimedia messaging as a configuration message. See

Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

Select Menu > Messaging > Message settings > Multimedia messages and from the following options:

Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)

Image size (multimedia) — to define the default image size used in multimedia messages

Default slide timing — to define the default time between slides in multimedia messages

Allow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home

network, you cannot receive multimedia messages when you are outside your home network. The default

setting of the multimedia message service is generally In home network.

Incoming multim. msgs. — to allow the reception of multimedia messages automatically, manually after being

prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No.

Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set

to No, or Incoming multim. msgs. is set to Reject.

Configuration settings > Configuration — only the configurations that support multimedia messaging are

shown. Select a service provider, Default, or Personal configuration for multimedia messaging. Select Account

and a multimedia messaging service account contained in the active configuration settings.

The settings affect the sending, receiving, and viewing of email.

You may receive the configuration settings for the email application as a configuration message. See

Configuration settings service p. 17. You can also enter the settings manually. See Configuration p. 110.

To activate the settings for the email application, select Menu > Messaging > Message settings > Email

messages and from the following options:

Configuration — Select the set that you want to activate.

Account — Select an account provided by the service provider.

My name — Enter your name or nickname.

Email address — Enter your email address.

Include signature — You can define a signature that is automatically added to the end of your email when you

write your message.

Reply-to address — Enter the email address to which you want the replies to be sent.

SMTP user name — Enter the name that you want to use for outgoing mail.

SMTP password — Enter the password that you want to use for outgoing mail.

Display terminal window — Select Yes to perform manual user authentication for intranet connections.

Incoming server type — Select POP3 or IMAP4, depending on the type of email system that you are using. If

both types are supported, select IMAP4.

Incoming mail settings — Select available options for POP3 or IMAP4.

11. My Items

In this menu you can manage graphics, images, recordings, and tones. These files are arranged in

folders.

Your phone supports an activation key system to protect acquired content. Always check the delivery terms of

any content and activation key before acquiring them, as they may be subject to a fee.

The files stored in My Items use a memory that mainly consists of the microSD card of your phone. You can

store images, themes, graphics, ringing tones, video clips, and sound clips in My Items.

To manage the files and folders, do the following:

1. Select Menu > My Items. A list of folders is shown. If a memory card is inserted in the phone, the folder

Memory card, (unformatted), or the name of the memory card is shown.

2. Scroll to the desired folder. To view a list of files in the folder, select Open. For the available options, select

Options.

3. Scroll to the file you want to view, and select Open. For the available options, select Options.

modified, transferred or forwarded.

■ Format memory card

To format a new memory card, select Menu > My Items. Scroll to the memory card folder, and select Options >

Format memory card.

12. Organizer

■ Alarm clock

You can set the phone to alarm at a desired time. Select Menu > Organizer > Alarm clock.

To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the

alarm time is set, select On.

To set the phone to alert you on selected days of the week, select Repeat alarm.

To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an

alarm tone, connect the headset to the phone. The phone uses the last channel you listened to as the alarm,

and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default

alarm tone replaces the radio.

To set a snooze time-out, select Snooze time-out and the time.

Stop the alarm

The phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was

switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or

select Snooze, the alarm stops for the time you set in Snooze time-out, and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone.

If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes

to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

■ Calendar

Select Menu > Organizer > Calendar.

The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in

bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To

view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view,

and select Options > Delete all notes.

Other options for the calendar day view can make a note; delete, edit, move, or repeat a note; copy a note to

another day; send a note with Bluetooth technology; or send a note to the calendar of another compatible

phone as a text message or multimedia message. In Settings you can set the date, time, time zone, date or time

format, date separator, default view, or the first day of the week. In Auto-delete notes you can set the phone to

delete old notes automatically after a specified time.

Make a calendar note

Select Menu > Organizer > Calendar. Scroll to the date you want, select Options > Make a note and one of the

following note types:

Meeting,

Call,

Birthday,

Memo, or

Reminder. Fill in the fields for the

note.

Note alarm

The phone beeps and displays the note. With a call note

on the display, to call the displayed number, press

the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select

Snooze.

To stop the alarm without viewing the note, select Exit.

■ To-do list

To save a note for a task that you must do, select Menu > Organizer > To-do list.

To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, select Save and

the priority, and set the deadline and alarm for the note.

To view a note, scroll to it, and select View.

You can also select an option to delete the selected note and delete all the notes that you have marked as done.

You can sort the notes by priority or by deadline, send a note to another phone as a text message or a

multimedia message, save a note as a calendar note, or access the calendar.

While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the

note as done.

■ Notes

To write and send notes, select Menu > Organizer > Notes.

To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and

select Save.

Other options include deleting and editing a note. While editing a note, you can also exit the text editor

without saving the changes. You can send the note to compatible devices through infrared, Bluetooth wireless

technology, text message, or a multimedia message. If the note is too long to be sent as a text message, the

phone asks you to delete the appropriate number of characters from your note.

■ Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, and

converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Select Menu > Organizer > Calculator. When 0 is displayed, enter the first number in the calculation. Press #

for a decimal point. Select Options > Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter

the second number. For a total, select Equals. To start a new calculation, first select and hold Clear.

Convert currency

Select Menu > Organizer > Calculator. To save the exchange rate, select Options > Exchange rate. Select

either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The

exchange rate remains in the memory until you replace it with another one. To perform the currency

conversion, enter the amount to be converted, and select Options > In domestic or In foreign.

Note: When you change base currency, you must enter the new rates because all previously set exchange rates are

cleared.

■ Countdown timer

Select Menu > Organizer > Countdown timer. Enter the alarm time in hours, minutes, and seconds, and select

OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown

timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the

note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm

automatically stops within 30 seconds. To stop the alarm and delete the note text, select Exit. To restart the

countdown timer, select Restart.

■ Stopwatch

You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other

functions of the phone can be used. To set the stopwatch timing in the background, press the end key.

Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery

power and reduces the battery life.

Select Menu > Organizer > Stopwatch and from the following options:

Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time

that you want to take an intermediate time. To stop the time observation, select Stop.

To save the measured time, select Save.

To start the time observation again, select Options > Start. The new time is added to the previous time. To reset

the time without saving it, select Reset.

To set the stopwatch timing in the background, press the end key.

Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.

Continue — to view the timing that you have set in the background

Show last — to view the most recently measured time if the stopwatch is not reset

View times or Delete times — to view or delete the saved times

13. Contacts

You can save names and phone numbers (contacts) in the phone memory and in the SIM card

memory.

The phone memory may save contacts with additional details, such as various phone numbers and text items.

You can also save an image or a video clip for a limited number of contacts. You can also use the video clip

saved with a contact as a ringing tone for the contact.

The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM

card memory are indicated by

■ Search for a contact

Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name.

■ Save names and phone numbers

Names and numbers are saved in the used memory. To save a name and phone number, select Menu >

Contacts > Names > Options > Add new contact. Enter the last name, first name, and the phone number.

■ Save numbers and text items

In the phone memory for contacts you can save different types of phone numbers and short text items per

name.

The first number you save is automatically set as the default number, and it is indicated with a frame around

the number type indicator (for example,

). When you select a name from contacts (for example, to make a

call), the default number is used unless you select another number.

1. Make sure that the memory in use is Phone or Phone and SIM.

2. Search for the contact to which you want to add a new number or text item, and select Details > Options >

Add detail.

3. To add a number, select Number and a number type.

To add another detail, select a text type, an image or a video clip from My Items, or a new image.

To search for an ID from the server of your service provider if you have connected to the presence service,

select User ID > Search. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select

Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.

To change the number type, scroll to the desired number, and select Options > Change type. To set the

selected number as the default number, select Set as default.

4. Enter the number or text item; to save it, select Save.

■ Copy contacts

Search for the contact you want to copy, and select Options > Copy. You can copy names and phone numbers

from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can save names

with one phone number attached to them.

■ Edit contact details

Search for the contact you want to edit, and select Details. To edit a name, number, text item, or to change the

image, select Options > Edit. You cannot edit an ID when it is on the IM contacts list.

■ Delete contacts

To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu >

Contacts > Delete all contacts > From phone memory or From SIM card. Confirm with the security code.

To delete a contact, search for the desired contact, and select Options > Delete contact.

To delete a number, text item, or an image attached to the contact, search for the contact, and select Details.

Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image.

Deleting an image from contacts does not delete it from My Items.

■ Business cards

You can send and receive a person’s contact information from a compatible device that supports the vCard

standard as a business card.

To send a business card, search for the contact whose information you want to send, and select Details >

Options > Send business card > Via multimedia, Via text message, Via infrared, or Via Bluetooth.

When you receive a business card, select Show > Save to save the business card in the phone memory. To

discard the business card, select Exit > Yes.

■ Settings

Select Menu > Contacts > Settings and from the following options:

Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall

names and numbers from both memories. In that case, when you save names and numbers, they are saved in

the phone memory.

Contacts view — to select how the names and numbers in Contacts are displayed

Name display — to select whether the contact’s first or last name is displayed first

Font size — to set the font size for the list of contacts

Memory status — to view the free and used memory capacity

■ Groups

Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller

groups with different ringing tones and group images.

■ Speed dials

To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-

dialing number that you want.

Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and

the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to

activate it. See also Speed dialling in Call p. 108.

To make a call using the speed-dialing keys, see Speed dialing p. 31.

■ Service and my numbers

Select Menu > Contacts and from the following options:

Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM

card (network service)

My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are

included on your SIM card.

14. Log

Note: This feature may not be available in your product due to your subscription

(network service).

To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To

view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the

contacts to whom you most recently sent messages, select Message recipients.

To view the approximate information on your recent communications, select Menu > Log > Call duration,

Packet data counter, or Packet data timer.

To view how many text and multimedia messages you have sent and received, select Menu > Log > Message

log.

Note: The actual invoice for calls and services from your service provider may vary, depending on network features,

rounding off for billing, taxes, and so forth.

Note: Some timers, including the life timer, may be reset during service or software upgrades.

15. Instant messages (IM)

Note: This feature may not be available in your product due to your subscription

(network service).

Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered

over TCP/IP protocols.

Before you can use instant messaging, you must subscribe to the service. To check the availability and costs,

and to subscribe to the service, contact your network operator or service provider, from whom you also receive

your unique ID, password, and settings.

To set the required settings for the instant messaging service, see Connection settings in Access the instant

messaging menu p. 91. The icons and texts on the display may vary, depending on the instant messaging

service.

While you are connected to the instant messaging service, you can use the other functions of the phone, and

the instant messaging conversation remains active in the background. Depending on the network, the active

instant messaging conversation may consume the phone battery faster, and you may need to connect the

phone to a charger.

Access the instant messaging menu

To access the Instant messages menu while still offline, select Menu > Instant messages. If more than one set

of connection settings for instant messaging service is available, select the desired one. If there is only one set

defined, it is selected automatically.

The following options are shown:

messaging service when you switch on the phone, select Menu > Instant messages, connect to the instant

messaging service, and select My settings > Automatic login > On phone start-up.

Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging

session

Connection settings — to edit the settings needed for messaging and presence connection

Connect to instant messaging

To connect to the instant messaging service, access the Instant messages menu, select the desired instant

messaging service if needed, and select Login. When the phone has successfully connected, Logged in is

displayed.

To disconnect from the instant messaging service, select Logout.

Start an instant messaging conversation

Open the Instant messages menu, and connect to the instant messaging service. You can start a conversation

in different ways:

Select Conversations. The list of new and read messaging sessions or invitations to instant messaging during

the active conversation is displayed. Scroll to a message or an invitation, and select Open.

indicates new and

indicates invitations.

read instant messages.

read group messages.

The icons and texts on the display may vary, depending on the instant messaging service.

Select IM contacts. The contacts that you added to the list are displayed. Scroll to the contact with whom you

would like to start instant messaging, and select Chat, or if

is shown next to a contact, select Open.

indicates an online contact and an offline contact in the contact memory of the phone.

indicates a blocked contact. See Block and unblock messages p. 95.

indicates that you have received a new message from a contact.

You can add contacts to the list. See Contacts for instant messaging p. 95.

Select Groups > Public groups (dimmed if groups are not supported by the network). The list of bookmarks to

public groups provided by the network operator or service provider is displayed. To start a conversation, scroll

to a group, and select Join. Enter the screen name that you want to use as a nickname in the conversation.

When you have successfully joined the group conversation, you can start a group conversation. You can also

create a private group. See Groups p. 95.

Select Search > Users or Groups to search for other instant messaging users or public groups on the network by

phone number, screen name, email address, or name. If you select Groups, you can search for a group by a

member in the group or by group name, topic, or ID.

To start the conversation when you have found the user or the group that you want, select Options > Chat or

Join group.

Start a conversation from Contacts.

Instant messaging invitation

In the standby mode, when you are connected to the instant messaging service and you receive a new

invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received,

scroll to an invitation, and select Open.

To join the private group conversation, select Accept. Enter the screen name that you want to use as a

nickname in the conversation.

To reject or delete the invitation, select Options > Reject or Delete. You can write an explanation for the

rejection.

Read a received instant message

In the standby mode, when you are connected to the instant messaging service and you receive a new message

that is not a message associated with an active conversation, New instant message is displayed. To read it,

select Read.

If more than one message is received, the number of messages, followed by new instant messages, is displayed.

Select Read, scroll to a message, and select Open.

New messages received during an active conversation are held in Instant messages > Conversations. If you

receive a message from someone who is not in IM contacts, the sender ID is displayed. If the sender is in the

phone memory and the phone recognizes it, the name of the person is displayed. To save a new contact that is

not in the phone memory, select Options > Save contact.

Join an instant messaging conversation

To join or start a conversation, select Write or start writing.

Tip: If you receive a new message during a conversation from a person who is not taking part in the

current conversation,

is displayed, and the phone sounds an alert tone.

Write your message. To send it, select Send, or press the call key. The message stays on the display, and

the reply message appears below your message.

Edit your availability status

1. Open the Instant messages menu, and connect to the instant messaging service.

2. To view and edit your own availability information or screen name, select My settings.

3. To allow all the other instant messaging users to see when you are online, select Availability > Available for

all.

To allow only the contacts on your instant messaging contact list to see when you are online, select

Availability > Available for contacts.

To appear as being offline, select Availability > Appear offline.

When you are connected to the instant messaging service,

are not visible to others.

indicates that you are online and

that you

Contacts for instant messaging

To add contacts to the instant messaging contacts list, do the following:

1. Connect to the instant messaging service, and select IM contacts.

2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually,

Search from server, Copy from server, or By mobile number. When the contact is successfully added, the

phone confirms it.

3. Scroll to a contact, and to start a conversation, select Chat.

Block and unblock messages

To block messages, connect to the instant messaging service, and select Conversations > IM contacts, or join or

start a conversation. Scroll to the contact from whom you want to block incoming messages, and select

Options > Block contact > OK.

To unblock messages, connect to the instant messaging service, and select Blocked list. Scroll to the contact

from whom you want to unblock the messages, and select Unblock.

You can also unblock messages from the contact list.

Groups

You can create your own private groups for an instant messaging conversation, or use the public groups

provided by the service provider. The private groups exist only during an instant messaging conversation. The

groups are saved on the server of the service provider. If the server you are logged into does not support group

services, all grouprelated menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain. Connect to the instant messaging

service, and select Groups > Public groups. Scroll to a group to which you want to chat, and select Join. If you

are not in the group, write your screen name as your nickname for the group. To delete a group from your group

list, select Options > Delete group.

To search for a group, select Groups > Search groups. You can search for a group by a member in the group or

by group name, topic, or ID.

Create a private group

Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and

the screen name that you want to use. Mark the private group members in the contacts list, and write an

invitation.

16. Settings

■ Profiles

Your phone has various setting groups, called profiles, which you can customize for different events and

environments.

Select Menu > Settings > Profiles and the desired profile. Select from the following options:

Activate — to activate the selected profile

Personalise — to personalize the profile. Select the setting you want to change, and make the changes.

Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time. When the time

set for the profile expires, the previous profile that was not timed becomes active.

Flight mode

You can deactivate all radio frequence functionality and still have access to games, calendar and phonebook.

Use flight mode in radio sensitive environments—on board airplanes or in hospitals. When the flight mode is

active, the flight icon is visible next to the battery charge level.

Select Settings > Profiles > Flight and from the following options: Activate- Personalise .

To deactivate the flight mode, you scroll to and select any other profile. Every time you try to make a call, you

are asked if you want to Exit flight profile? click Yes to deactivate Flight mode.

In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select

Yes when asked Exit flight profile? The phone attempts to make an emergency call.

When the emergency call ends, the phone automatically enters the general profile mode.

■ Themes

A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme,

and a ringing tone.

Select Menu > Settings > Themes and from the following options:

Select theme — to set a theme in your phone. A list of folders in My Items opens. Open the Themes folder, and

select a theme.

Theme downloads — to open a list of links to download more themes

■ Tones

You can change the settings of the selected active profile.

Select Menu > Settings > Tones > Incoming call alert, Ringing tone, Ringing volume, Vibrating alert, PTT

settings, Message alert tone, Instant msg. alert tone, Keypad tones, or Warning tones. You can find the same

settings in the Profiles menu.

To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert

for. Scroll to the caller group you want or All calls, and select Mark.

■ Display

With display settings you can personalize your phone display view.

Standby mode

Enable or disable active standby from idle

To enable the active standby mode, select Menu > Settings > Display > Standby mode settings > Active

standby > My active standby.

To disable the active standby mode, select Menu > Settings > Display > Standby mode settings > Active

standby > Off.

Standby settings

Select Menu > Settings > Display > Standby mode settings and from the following options:

Active standby > My active standby — to display the active standby. Select Options and from the following

options:

•

Personalise — to change the content on the display

Organise — to reorganize the content on the display

Enabling active standby — to change the key for accessing the navigation mode. The same setting is also in

the My shortcuts menu. See Enable active standby p. 101.

Wallpaper — to set your phone to display an image or a slide as wallpaper when the phone is in the standby

mode. Select Wallpapers > Image or Slide set. Select an image or a slide from My Items, and Options > Set as

wallpaper. To download more graphics, select Graphic downloads.

Standby font colour — to select the color for the texts on the display in the standby mode

Navigation key icons — to set the scroll key icons that are shown in the standby mode

Operator logo — to set your phone to display or hide the operator logo

Cell info display > On — to receive information from the network operator depending on the network cell used

(network service)

Screen saver

To select a screen saver from My Items, select Menu > Settings > Display > Screen saver > Screen savers >

Image, Slide set, Video clip, or Open camera. To download more screen savers, select Graphic downloads. To

select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select

On.

Power saver

To save some battery power, select Menu > Settings > Display > Power saver. A digital clock is displayed when

no function of the phone is used for a certain time.

Sleep mode

To save most battery power, select Menu > Settings > Display > Sleep mode. The display turns completely

black when no function of the phone is used for a certain time.

Font size

To set the font size for reading and writing messages and viewing contacts and Web pages, select Menu >

Settings > Display > Font size.

■ Time and date

To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or

Auto-update of date/time (network service).

When traveling to a different time zone, select Menu > Settings > Time and date > Clock > Time zone and the

time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT) or

Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone

to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the

time zone for New York (USA), 5 hours west of Greenwich/London (UK).

■ My shortcuts

With personal shortcuts you get quick access to often used functions of the phone.

100

Left selection key

To select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left

selection key. See also Standby mode p. 26.

To activate a function in the standby mode if the left selection key is Go to, select Go to and the desired

function on your personal shortcut list. Select Options and from the following options:

Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark

or Unmark.

Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move,

and select Move. Scroll to where you want to move the function, and select OK.

Right selection key

To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right

selection key. See also Standby mode p. 26.

Navigation key

To select shortcut functions for the scroll keys, select Menu > Settings > My shortcuts > Navigation key. Scroll

to the desired key and select Change and a function from the list. To remove a shortcut function from the key,

select (empty). To reassign a function for the key, select Assign. See Standby mode shortcuts p. 28.

Enable active standby

To select the key to access the active standby navigation mode, select Menu > Settings > My shortcuts >

Enabling active standby > Navigation key up, Navigation key down, or Navigation key up/down.

101

Voice commands

You can call contacts and carry out phone functions by saying voice commands. Voice commands are

language-dependent. To set the language, see Voice playback language in Phone p. 109.

The phone voice commands are active by default. Select Menu > Settings > My shortcuts > Voice commands

and a folder. Scroll to a function.

indicates that the voice tag is activated. . To play the activated voice

command, select Play. To use voice commands, see Enhanced voice dialing p. 32.

To manage the voice commands, scroll to a phone function, and select from the following options:

Edit or Remove — to change or deactivate the voice command of the selected function. When you edit the

voice tag text, the phone associates it to a new virtual voice tag.

Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list.

Add all or Remove all is not shown if all voice commands are active or inactive.

■ Connectivity

You can connect the phone to a compatible device using an infrared, Bluetooth wireless technology, or USB

data cable (CA-53 or DKU-2) connection. You can also define the settings for packet data dial-up connections.

Bluetooth wireless technology

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: hands-free, headset, object push

profile, file transfer profile, dial-up networking profile, SIM access profile, and serial port profile. To ensure interoperability

between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the

manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service

provider.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase

the demand on battery power and reduce the battery life.

102

Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32

feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other

devices do not need to be in direct line-of-sight, although the connection can be subject to interference from

obstructions such as walls or from other electronic devices.

Set up a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth and from the following options:

Bluetooth > On or Off — to activate or deactivate the Bluetooth function.

indicates an active Bluetooth

connection. When activating Bluetooth technology for the first time, you are asked to give a name for the

phone. Please note that this name will be viewed by other people - use a unique name that is easy for others to

identify.

Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want

to connect to the phone.

Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range.

Scroll to a device, and select Pair. Enter the Bluetooth passcode of the device to associate (pair) the device to

your phone. You must only give this passcode when you connect to the device for the first time. Your phone

connects to the device, and you can start data transfer.

Bluetooth wireless connection

Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active,

select Active devices. To view a list of Bluetooth devices that are currently paired with the phone, select Paired

devices.

Select Options to access available options depending on the status of the device and the Bluetooth

connection. Select Connect > Assign short name or Auto-conn. without conf..

103

Bluetooth settings

To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity >

Bluetooth > Bluetooth settings > My phone's visibility or My phone's name.

Operating the phone in hidden mode is a safer way to avoid malicious software.

Do not accept Bluetooth connectivity from sources you do not trust.

As another alternative, - switch off the Bluetooth functionality. This will not affect other functionalities of the phone.

Infrared

You can send or receive data to or from a compatible phone or data device (for example, a computer) through

the infrared (IR) port of your phone. To use an IR connection, the device with which you want to establish a

connection must be IrDA compliant.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser

product.

When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices.

To activate the IR port of your phone, select Menu > Settings > Connectivity > Infrared.

To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the phone displays

Deactivate infrared?, select Yes.

If data transfer is not started within 2 minutes after the activation of the IR port, the connection is canceled

and must be started again.

IR connection indicator

When

data through its IR port.

When blinks, your phone is trying to connect to the other device, or a connection has been lost.

is shown continuously, the IR connection is activated, and your phone is ready to send or receive

104

Packet data

WCDMA and general packet radio service (GPRS) are network services that allow mobile phones to send and

receive data over an Internet protocol protocol (IP)based network. WCDMA and GPRS are data bearers that

enable wireless access to data networks such as the Internet.

Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability

of EGPRS and data transfer speed, contact your network operator or service provider.

The applications that may use WCDMA or (E)GPRS are MMS, video streaming, browsing sessions, email, remote

SyncML, Java application downloading, and the PC dial-up.

When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS if this is available in the

network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select

GPRS or GSM data (circuit switched data, CSD).

Packet data connection

Select Menu > Settings > Connectivity > Packet data > Packet data connection, and from the following

options:

Always online to set the phone to automatically register to a packet data network when you switch on the

phone.

indicates that the packet data service is available.

If you receive a call or a text message, or make a call during a packet data connection,

the packet data connection is suspended (on hold).

or indicates that

When needed to register and establish a packet data connection when an application using packet data needs

it, and to close the connection when you end the application.

Packet data settings

You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable connection to a

compatible PC and use the phone as a modem to enable packet data connectivity from the PC.

105

To define the settings for the packet data connections from your PC, select Menu > Settings > Connectivity >

Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select

Edit active access point > Alias for access point, enter a name to change the access point settings, and select

OK. Select Packet data access point, enter the access point name (APN) to establish a connection to a network,

and select OK.

You can also set the packet data service settings (access point name) on your PC using the Nokia Modem

Options software. See Nokia PC Suite p. 115. If you have set the settings both on your PC and on your phone,

the PC settings are used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile

phone), a compatible PC, or a remote Internet server (network service).

Partner list

To copy or synchronize data from your phone, the name of the device and the settings must be in the list of

partners in transfer contacts. If you receive data from another device (for example, a compatible mobile

phone), the partner is automatically added to the list, using the contact data from the other device. Server

synchronisation and PC synchronisation are the original items in the list.

To add a new partner to the list (for example, a new device), select Menu > Settings > Connectivity > Data

transfer > Options > Add transfer contact > Phone synchronisation or Phone copy, and enter the settings

according to the transfer type.

To edit the copy and synchronize settings, select a contact from the partner list and Options > Edit.

To delete a partner, select a contact from the partner list and Options > Delete, and confirm Delete transfer

contact?. You cannot delete Server synchronisation or PC synchronisation.

Data transfer with a compatible device

For synchronization, Bluetooth wireless technology or infrared is used. The other device is in the standby mode.

106

To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the

list, other than Server synchronisation or PC synchronisation. According to the settings, the selected data is

copied or synchronized. The other device also must be activated for receiving data.

Data transfer without SIM card

Your phone allows data transfer when the SIM card is not inserted.

Switch on your phone with no SIM card inserted, and select Transfer and from the following options:

Send data — to select a contact, other than Server synchronisation and PC synchronisation, from the partner

list to transfer data from your phone. The phone starts a synchronization or copy session.

Receive data > Via Bluetooth or Via infrared — to receive data from the other phone

Synchronize from a compatible PC

Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the

Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology, infrared, or a USB data

cable for the synchronization, and start the synchronization from the PC.

Synchronize from a server

To use a remote Internet server, you must subscribe to a synchronization service. For more information and the

settings required for this service, contact your service provider. You may receive the settings as a configuration

message. See Configuration settings service p. 17 and Configuration p. 110.

If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization

from your phone.

Select Menu > Settings > Connectivity > Data transfer > Server synchronisation. Depending on the settings,

select Initialising synchronisation or Initialising copy.

107

If the contacts or calendar are full, synchronizing for the first time or after an interrupted synchronization may

take up to 30 minutes to complete.

USB data cable

You can use the USB data cable to transfer data between the memory card inserted in the phone and a

compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.

To activate the memory card for data transfer or picture printing, connect the USB data cable; when the phone

displays USB data cable connected. Select mode., select OK. Select from the following modes:

Default mode — to use the cable for PC Suite

To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, Printing, or

Data storage.

■ Call

Select Menu > Settings > Call and from the following options:

Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some

call barring functions are active. See Call barring service in Security p. 111.

Anykey answer > On — to set the phone to answer an incoming call by pressing any key except the power and

end keys.

Automatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call

attempt

Video to voice automatic redial — to select whether the phone automatically makes a voice call to the number

to which a video call failed.

Speed dialling > On — to dial the names and phone numbers assigned to the speed-dialing keys 3 to 9, press

and hold the corresponding number key

108

Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress

(network service). See Call waiting p. 33.

Summary after call > On — to briefly display the approximate duration and cost (network service) of the call

after each call

Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use

the setting agreed upon with your service provider, select Set by network.

■ Phone

Select Menu > Settings > Phone and from the following options:

Language settings — to set the display language of your phone, select Phone language. If you select Automatic,

the phone selects the language according to the information on the SIM card.

To select the USIM card language, select SIM language.

To set a language for the voice playback, select Voice playback language. See Make a voice dialing call p. 32

and Voice commands in My shortcuts p. 100.

Memory Status — to see how much of the phone’s memory is reserved and how much is free.

Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the

phone is in the standby mode and no function of the phone has been used. Select On, and set the time.

Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the

security code, and select On.

When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.

Welcome note — to write the note you would like to be shown briefly when the phone is switched on.

Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You cannot access this option during an

active call.

109

Operator selection > Automatic — to set the phone to automatically select one of the cellular networks

available in your area. With Manual you can select a network that has a roaming agreement with your home

network operator.

Confirm SIM serv. actions — See SIM Toolkit (STK) p. 114.

Help text activation — to select whether the phone shows help texts

Start-up tone — to select whether the phone plays a tone when the phone is switched on.

Flight query —to select whether Activate flight profile? appears every time the phone is switched on if the

flight mode was set before switching off the device. See Flight mode p. 97.

■ Enhancements

This menu is shown only if the phone is or has been connected to a compatible mobile enhancement.

Select Menu > Settings > Enhancements. Depending on the enhancement, you can select some of the

following options:

Default profile — to select the profile that you want to be automatically activated when you connect to the

selected enhancement

Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming

call alert is set to Beep once or Off, automatic answer is off.

■ Configuration

You can configure your phone with settings that are required for certain services to function correctly. The

services are multimedia messaging, instant messaging, synchronization, email application, streaming, push to

talk, IM and Web. Your service provider may also send you these settings. See Configuration settings service

p. 17.

For information on availability and the appropriate configuration settings, contact your network operator or

service provider.

110

Select Menu > Settings > Configuration and from the following options:

Default config. settings — to view the service providers saved in the phone. Scroll to a service provider, and

select Details to view the applications that the configuration settings of this service provider support. To set

the configuration settings of the service provider as default settings, select Options > Set as default. To delete

configuration settings, select Delete.

Activ. default in all apps. — to activate the default configuration settings for supported applications

Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details

to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.

Connect to serv. support — to download the configuration settings from your service provider if this is

supported by the service provider

Personal config. settings — to add new personal accounts for various services, and to activate or delete them.

To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new.

Select the service type, and select and enter each of the required parameters. The parameters differ according

to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or

Activate.

■ Security

When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may

be possible to the official emergency number programmed into your device.

Select Menu > Settings > Security and from the following options:

PIN code request and UPIN code request — to set the phone to ask for your PIN or UPIN code every time the

phone is switched on. Some SIM cards do not allow the code request to be turned off.

PIN2 code request — to select whether the PIN2 code is required when using a phone feature that is protected

by the PIN2 code. Some SIM cards do not allow the code request to be turned off.

111

Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A

barring password is required.

Fixed dialling — to create, edit, and activate a list of phone numbers or prefixes. When the list is activated, you

can only call or send messages to the numbers on the list. If the SIM card does not support this option, Fixed

dialling is hidden.

Closed user group — to specify a group of people whom you can call and who can call you (network service)

Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into

the phone. If you select Security level > Memory, the phone asks for the security code when the SIM card

memory is selected, and you want to change the memory in use.

Access codes — to change the security code, PIN code, PIN2 code, or barring password

Code in use — to select whether the PIN code or UPIN code should be active

Authority certificates or User certificates — to view the list of the authority or user certificates downloaded

into your phone. See Certificates p. 52.

Security module settings — to view Security module details, activate Module PIN request, or change the module

PIN and signing PIN. See also Access codes p. 16.

■ Digital rights management

Digital rights management (DRM) is copyright protection, designed to prevent modification and to limit

distribution of protected files. When you download protected files, such as sound, video, themes, or ringing

tones to your phone, the files are free, but locked. You pay for the key to activate the file and the activation key

is automatically sent to your phone when you download the file.

To view the permissions for a protected file, scroll to the file, and select Options > Activation keys. For

example, you can see how many times you can view a video or how many days you have left for listening to a

song.

112

To extend the permissions for a file, select Options and the corresponding option for the file type, such as

Activate theme. You can send certain types of protected files to your friends, and they can buy their own

activation keys.

This phone supports OMA DRM 1.0.

■ Restore factory settings

To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett..

Enter the security code.

113

17. SIM Toolkit (STK)

Your SIM card may provide additional services. You can access this menu only if it is supported

by your SIM card. The name and contents of the menu depend on the available services.

For availability, rates, and information on using SIM ToolKit services, contact your SIM card vendor, for example, network

operator, service provider, or other vendor.

To set the phone to show you the confirmation messages sent between your phone and the network when you

are using the SIM Toolkit services, select Menu > Settings > Phone > Confirm SIM serv. actions > Yes.

Accessing these services may involve sending messages or making a phone call for which you may be charged.

114

18. PC connectivity

You can send and receive email, and access the Internet when your phone is connected to a compatible PC

through an IR, Bluetooth wireless technology, or USB data cable connection. You can use your phone with a

variety of PC connectivity and data communications applications.

■ Nokia PC Suite

With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and

the compatible PC or a remote Internet server (network service). You may find more information and PC Suite

on the Nokia Web site at www.nokia.com/support.

■ EGPRS, HSCSD, CSD, and WCDMA

With your phone you can use the enhanced GPRS (EGPRS), general packet radio service (GPRS), circuit

switched data (GSM data) services, high speed circuit switched data (HSCSD), and WCDMA packet and circuit

switched data services.

For availability and subscription to data services, contact your network operator or service provider.

The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to

connect the phone to a charger for the duration of data transfer.

See Packet data settings p. 105.

■ Data communication applications

For information on using a data communication application, refer to the documentation provided with it.

Making or answering phone calls during a computer connection is not recommended, as it might disrupt the

operation.

115

For better performance during data calls, place the phone on a stationary surface with the keypad facing

downward. Do not move the phone by holding it in your hand during a data call.

116

19. Battery information

■ Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three

complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved

batteries, and recharge your battery only with Nokia approved chargers designated for this device.

If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be

necessary to connect the charger and then disconnect and reconnect it to start the charging.

Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to

a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or

before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen

causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and

lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold

battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in

temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries

according to local regulations. Please recycle when possible. Do not dispose as household waste.

117

■ Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from

an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label

using the following steps:

Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to

believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest

authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery

for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol

from one angle and the Nokia Original Enhancements logo when looking from another angle.

2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on

each side respectively.

3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210.

Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from

the number at the top row followed by the bottom row.

118

4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/

batterycheck.

To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276.

National and international operator charges will apply.

You should receive a message indicating whether the code can be authenticated.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use

the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not

approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its

enhancements. It may also invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

119

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will

help you protect your warranty coverage.

•

Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode

electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before

replacing it.

•

Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and

warp or melt certain plastics.

•

Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the

device and damage electronic circuit boards.

•

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could

damage the device and may violate regulations governing radio devices.

•

Use chargers indoors.

Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a

service facility.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working

properly, take it to the nearest authorized service facility for service.

120

Additional safety information

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

■ Operating environment

Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited

or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF

exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters

(7/8 inches) from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain

metal and should position the device the above-stated distance from your body. To transmit data files or messages, this

device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed

until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is

completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other

magnetic storage media near the device, because information stored on them may be erased.

■ Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they

are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities

when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent

with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should

do the following:

•

Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker

121

•

Not carry the device in a breast pocket

Hold the device to the ear opposite the pacemaker to minimize the potential for interference.

If you suspect interference, switch off your device, and move the device away.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

■ Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic

fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.

For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been

added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in

the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air

bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air

bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious

injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless

teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may

be illegal.

■ Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions.

Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks

in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling

points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage,

and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive

atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage

122

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or

particles such as grain, dust, or metal powders.

■ Emergency calls

Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline

networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed.

You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the device.

2. Press the end key as many times as needed to clear the display and ready the device for calls.

3. Enter the official emergency number for your present location. Emergency numbers vary by location.

4. Press the call key.

If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult

this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be

the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

■ Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves

recommended by international guidelines. These guidelines were developed by the independent scientific organization

ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are

conducted using standard operating positions with the device transmitting at its highest certified power level in all tested

frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is

designed to use only the power required to reach the network. That amount changes depending on a number of factors such

123

as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at

the ear is 0.87 W/kg.

Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national

reporting and testing requirements and the network band. Additional SAR information may be provided under product

information at www.nokia.com.

124

Index

call waiting .................................................... 33

calls .................................................................. 91

camera ............................................................. 39

camera key ..................................................... 25

camera settings ............................................ 40

certificates ..................................................... 53

charge level .................................................... 26

charger connector ........................................ 26

charging ........................................................118

clock settings ..............................................101

configuration ...............................................111

contacts .......................................................... 87

cookies ............................................................ 50

countdown timer .......................................... 85

access codes ...................................................16

activation keys ............................................114

active standby ................................... 100, 102

alarm clock .....................................................82

applications ....................................................55

audio messages .............................................72

barring password ..........................................17

battery ..........................................................118

authentication ....................................119

installation ..............................................19

Bluetooth .....................................................103

Bluetooth settings .....................................105

bookmarks .......................................................49

browser ............................................................46

browser security ............................................50

business cards ................................................89

data communication .................................116

data transfer ................................................107

date settings ................................................101

dialed numbers ............................................. 91

digital rights management ......................113

digital signature ........................................... 53

download

cache memory ...............................................52

calculator ........................................................84

calendar ...........................................................82

call key .............................................................25

call settings .................................................109

applications ............................................ 56

games ....................................................... 55

125

protected files .....................................113

keypad lock .................................................... 30

e-mail application ........................................7 3

emergency calls ..........................................124

end key .............................................................25

ending a call ...................................................32

enhancements settings ............................111

equalizer ..........................................................45

lock the ke ypad ............................................. 30

log ..................................................................... 91

maintenance ................................................121

media player .................................................. 40

memory card ...........................................21, 81

memory card slot ......................................... 26

message center number ............................. 66

message counter .......................................... 91

message templates ...................................... 71

missed calls .................................................... 91

multimedia messages ................................. 68

music player .................................................. 41

mute ................................................................. 32

My Items ......................................................... 81

my numbers ................................................... 90

flash messages ...............................................71

flight mode .....................................................98

flight query ..................................................111

FM radio ..........................................................43

folders ..............................................................71

games ...............................................................55

groups ..............................................................89

image size (multimedia) .............................78

indicators ........................................................28

info messages ................................................76

infrared .........................................................105

Instant ..............................................................92

Instant messages ..........................................92

IR port ..............................................................26

navigation key ............................................... 25

network ........................................................... 14

notes ................................................................ 84

operator logo ...............................................100

organizer ......................................................... 82

keyguard ..........................................................30

packet data ........................................106, 116

126

PC Suite ........................................................116

permissions for a protected file .............113

personalize ............................................98, 100

phone settings ............................................110

PIN code ..........................................................16

plug and play service ...................................23

power key ........................................................25

power saver .................................................101

predictive text input ....................................36

profiles .............................................................98

progressive download ..................................40

PTT key .............................................................26

PUK code .........................................................16

security code ................................................. 16

security settings .........................................112

selec tion ke ys ................................................ 25

service commands ........................................ 76

settings

clock .......................................................101

date ........................................................101

time ........................................................101

shortcuts ......................................................... 28

signal strength .............................................. 26

SIM card ......................................................... 19

SIM messages ................................................ 67

SMS e-mail .................................................... 67

special characters ........................................ 37

speed dialing ..........................................31, 90

STK ..................................................................115

stopwatch ....................................................... 85

streaming service ......................................... 41

switch on and off ......................................... 23

synchronize ..................................................108

from PC .................................................108

from server ...........................................108

radio .................................................................43

received calls ..................................................91

restore factory settings ............................114

ringing tones .......................................... 32, 99

safety ......................................................12, 122

certification information (SAR) ......124

emergency calls ..................................124

explosive environments ....................123

hearing aids .........................................123

medical devices ..................................122

pacemakers ..........................................122

vehicles .................................................123

screen saver .................................................100

templates ........................................................ 67

themes ............................................................. 99

time settings ................................................101

to-do list ......................................................... 83

traditional text input .................................. 37

127

voice recorder ................................................ 44

volume keys ................................................... 25

unlock keypad ................................................30

USB data cable ...........................................109

wallpaper ...............................................99, 100

Web .................................................................. 46

writing language .......................................... 36

vibrating alert ................................................99

voice commands ........................................103

voice dialing ...................................................32

voice messages ..............................................76

128

Transcend Information StoreJet TS250GSJ25F User Manual
Toshiba Canvio Hard Drive HDWC120XK3J1 User Manual
Teac DV W28SS R User Manual
Sony Net MD Walkman MZ NE410 User Manual
Sony 512E User Manual
Samsung Spinpiont F1 8MB User Manual
Samsung SGH i617 BlackJack User Manual
Samsung GT GT S3850 User Manual
Philips 128MB User Manual
Nokia N73 1 User Manual