Nokia 7390 User Guide
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without
prior notice.
This device complies with Directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law,
no warranties of any kind, either express or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this document. Nokia reserves the right
to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia
dealer nearest to you.
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9253441/Issue 1
C o n t e n t s
Contents
Service commands.............................. 42
For your safety.......................... 6
General information................. 9
Access codes............................................ 9
Configuration settings service ........ 10
Download content.............................. 10
Nokia support....................................... 10
1. Get started......................... 11
Install SIM card and battery............ 11
Insert a microSD card........................ 12
Charge the battery.............................. 13
Open and close the phone................ 14
Switch the phone on and off........... 14
Antenna ................................................. 15
Phone strap........................................... 15
Search for a contact .......................... 47
Save details........................................... 47
Copy or move contacts...................... 48
Edit contact details............................ 48
Synchronize all .................................... 48
Delete contacts.................................... 48
Business cards...................................... 49
Settings.................................................. 49
Groups.................................................... 49
Speed dials............................................ 50
Info, service, and my numbers ........ 50
2. Your phone......................... 16
Keys and parts...................................... 16
Standby mode...................................... 18
Flight mode........................................... 20
Keypad lock (keyguard) ..................... 21
Functions used without a SIM card 21
3. Call functions..................... 22
Make a voice call ................................ 22
Answer or reject a call....................... 23
Options during a voice call .............. 23
Make a video call................................ 24
Answer or reject a video call........... 25
Options during a video call.............. 25
Video sharing ....................................... 25
8. Log ...................................... 51
Position information.......................... 51
4. Write text........................... 27
Traditional text input......................... 27
Predictive text input .......................... 27
9. Settings ............................. 52
Profiles................................................... 52
Themes................................................... 52
Tones....................................................... 52
Main Display......................................... 53
Settings.................................................. 53
5. Navigate the menus .......... 29
6. Messaging .......................... 30
4
Time and date....................................... 54 PTT settings........................................... 85
My shortcuts......................................... 54 Configuration settings....................... 86
Connectivity.......................................... 55 Web ......................................................... 86
Call........................................................... 60
15.Applications ...................... 87
Phone...................................................... 61
Configuration........................................ 63
Security .................................................. 63
Digital rights management............... 65
Restore factory settings..................... 65
10.Operator menu.................. 66
11.Gallery............................... 67
Set up browsing................................... 90
Print images.......................................... 67
Memory card......................................... 67
12.Media ................................ 69
Camera ................................................... 69 Appearance settings........................... 92
Video ....................................................... 70 Security settings.................................. 93
Media player......................................... 70 Download settings .............................. 93
Music player.......................................... 71 Service inbox ........................................ 93
Radio....................................................... 73 Cache memory...................................... 94
Voice recorder....................................... 74 Browser security.................................. 94
Equalizer................................................. 75
18.PC connectivity................. 97
Nokia PC Suite...................................... 97
13.Organizer........................... 76
Alarm clock............................................ 76 Packet data, HSCSD, and CSD.......... 97
Calendar................................................. 76 Bluetooth............................................... 97
To-do list................................................ 77 Data communication applications . 98
Notes....................................................... 77
19.Battery information.......... 99
Calculator .............................................. 78
Charging and discharging................. 99
Countdown timer ................................ 78
Nokia battery authentication ....... 100
Stopwatch ............................................. 79
Care and maintenance ........ 102
14.Push to talk....................... 80
Push to talk channels......................... 80
Switch PTT on and off........................ 82
information.......................... 104
Make and receive a PTT call ............. 82
Additional safety
Callback requests................................. 84
Add a one-to-one contact................ 85
Index..................................... 108
5
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited
or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which
could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the phone at a refuelling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
6
F o r y o u r s a f e t y
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press the end key
as many times as needed to clear the display and return to the
start screen. Enter the emergency number, then press the call key.
Give your location. Do not end the call until given permission to
do so.
■ About your device
The wireless device described in this guide is approved for use on the WCDMA
2100, EGSM 900, and GSM 1800 and 1900 networks. Contact your service
provider for more information about networks.
When using the features in this device, obey all laws and respect the privacy
and legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others, including
copyrights.
Warning: To use any features in this device, other than the alarm
clock, the device must be switched on. Do not switch the device on
when wireless device use may cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many
of the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you
may have to make specific arrangements with your service provider before you
can utilize network services. Your service provider may need to give you
additional instructions for their use and explain what charges will apply.
Some networks may have limitations that affect how you can use network
7
F o r y o u r s a f e t y
services. For instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain features be disabled or
not activated in your device. If so, they will not appear on your device menu.
Your device may also have been specially configured for your network
provider. This configuration may include changes in menu names, menu order
and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as multimedia messaging
(MMS), browsing, e-mail application, instant messaging, presence enhanced
contacts, remote synchronization, and content downloading using the
browser or MMS, require network support for these technologies.
■ Shared memory
The following features in this device may share memory: gallery, contacts,
text messages, multimedia messages, and instant messages, e-mail, calendar,
to-do notes, JavaTM games and applications, and note application. Use of one
or more of these features may reduce the memory available for the remaining
features sharing memory. For example, saving many Java applications may use
all of the available memory. Your device may display a message that the
memory is full when you try to use a shared memory feature. In this case,
delete some of the information or entries stored in the shared memory
features before continuing. Some of the features, such as text messages, may
have a certain amount of memory specially allotted to them in addition to the
memory shared with other features.
■ Enhancements
A few practical rules about accessories and
enhancements
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement,
grasp and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
8
G e n e r a l i n f o r m a t i o n
General information
■ Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and
to set the phone to request the code, see “Security,” p. 63.
PIN codes
The personal identification number (PIN) code and the universal
personal identification number (UPIN) code (4 to 8 digits) help to
protect your SIM card against unauthorized use. See “Security,”
p. 63.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and
is required for some functions.
The module PIN is required to access the information in the security
module. See “Security module,” p. 95.
The signing PIN is required for the digital signature. See “Digital
signature,” p. 96.
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using the Call
barring service. See “Security,” p. 63.
9
G e n e r a l i n f o r m a t i o n
■ Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, Nokia Xpress audio messaging, or remote Internet server
synchronization, your phone needs the correct configuration settings.
For more information on availability, contact your network operator,
service provider, nearest authorized Nokia dealer, or visit the support
area on the Nokia Web site, www.nokia.com/support.
When you have received the settings as a configuration message, and
the settings are not automatically saved and activated, Configuration
settings received is displayed.
To save the settings, select Show > Save. If required, enter the PIN
code supplied by the service provider.
To discard the received settings, select Exit or Show > Discard.
■ Download content
You may be able to download new content (for example, themes) to
the phone (network service).
For the availability of different services, pricing, and tariffs, contact
your service provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Nokia support
Check www.nokia.com/support or your local Nokia Web site for the
latest version of this guide, additional information, downloads, and
services related to your Nokia product.
On the Web site, you can get information on the use of Nokia
products and services. If you need to contact customer service, check
the list of local Nokia Care contact centers at www.nokia.com/
customerservice.
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
10
G e t s t a r t e d
1. Get started
■ Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other
vendor.
This device is intended for use with BP-5M battery. Always use
original Nokia batteries. See “Nokia battery authentication,” p. 100.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the
card.
To remove the back
cover of the phone by
pushing the back
cover release slide (1),
lift the cover (2).
Remove the battery as
shown (3).
Insert the SIM card
with the gold-colored
contact area on the
card facing
downwards, and the
cut corner of the SIM
card placed in the left
lower corner (4).
To release the SIM card push the SIM removal slider in the direction
of the arrow (5).
11
G e t s t a r t e d
Replace the battery
(6). Place the back
cover into its place
(7). Make sure it
clicks into place, so
that the back cover
release slide resumes
its normal
position(8).
■ Insert a microSD card
Keep all microSD memory cards out of the reach of small children.
A microSD card can be loaded with ringing tones,
themes, tones, images and videos. If you delete,
reload, or replace this card, these functions and
features may not function properly.
Use only compatible microSD cards with this device. Other memory cards,
such as Reduced Size MultiMedia cards, do not fit in the microSD card slot
and are not compatible with this device. Using an incompatible memory card
may damage the memory card as well as the device, and data stored on the
incompatible card may be corrupted.
Use only microSD cards approved by Nokia for use with this device. Nokia
utilizes the approved industry standards for memory cards but not all other
brands may function correctly or be fully compatible with this device.
You can remove or replace a microSD card during phone operation
without switching the phone off.
Important: Do not remove a microSD card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
12
G e t s t a r t e d
1. Remove the back cover of the phone.
Swing the microSD memory card holder
open (1)
2. Insert the card into the memory card
holder with the gold-colored contact
area facing up (2).
3. Close the card holder (3 and 4) and slide
the back cover back in place.
■ Charge the battery
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from an AC-3 or AC-4
charger.
Warning: Use only batteries, chargers, and enhancements approved
by Nokia for use with this particular model. The use of any other
types may invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the
socket at the side of your phone.
A CA-44 charging adapter can be used
with older charger models.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any calls can be made.
13
G e t s t a r t e d
The charging time depends on the charger used. Charging a BP-5M
battery with the AC-3 charger takes approximately 2 hours and
20 minutes while the phone is in the standby mode.
■ Open and close the phone
You open and close the phone manually. When you open the fold of
the phone, it opens up to appromiximately 155 degrees. Do not try to
force the fold open more.
Depending on the Theme a tone sounds when you open and close the
phone.
■ Switch the phone on and off
Warning: Do not switch the phone on when
wireless phone use is prohibited or when it may
cause interference or danger.
To switch the phone on or off, press and hold the
power key. See “Keys and parts,” p. 16.
If the phone asks for a PIN or a UPIN code, enter
the code (displayed as ****), and select OK.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of
the time difference with respect to Greenwich Mean Time (GMT), and
enter the date. See “Time and date,” p. 54.
Plug and play service
When you switch on your phone for the first time, and the phone is in
the standby mode, you are asked to get the configuration settings
from your service provider (network service). Confirm or decline the
query. See “Configuration settings service,” p. 10.
14
G e t s t a r t e d
■ Antenna
Your device has an internal antenna.
Note: As with any other radio
transmitting device, do not touch
the antenna unnecessarily when
the device is switched on. Contact
with the antenna affects call
quality and may cause the device
to operate at a higher power level
than otherwise needed. Avoiding
contact with the antenna area
when operating the device
optimizes the antenna
performance and the battery life.
■ Phone strap
Remove the back cover of the phone. Insert a
thread through the eyelet. Place the thread
around the post of the phone as shown in the
picture. Tighten the thread. Put the back cover
back in place.
15
Y o u r p h o n e
2. Your phone
■ Keys and parts
1 Light sensor
2 Earpiece
3 Small camera
4 Main display
5 Left and right selection keys
6 Middle selection key
7 4-way scroll key
8 Call key
9 Keypad
10 Loudspeaker
11 Volume key (Volume up = PTT key)
12 Volume key down
13 End key
14 Camera key/auto focus
15 Mini display
16 Media selection key right
17 Media selection key
18 Media selection key left
16
Y o u r p h o n e
■ Standby mode
When the phone is ready for use, and you have not entered any
characters, the phone is in the standby mode.
Mini display
1 Network mode indicator
2 Signal strength of the cellular network
3 Battery charge status
4 Indicators
5 Clock
6 Network name or the operator logo and
date
7 Media menu
8 Scroll left in the loop menu with the Left selection key
9 Select in the media menu with the Middle selection key
10 Scroll right in the loop menu with the Right selection key
Main display
1 Network mode indicator
2 Signal strength of the cellular network
3 Battery charge status
4 Indicators
5 Network name or the operator logo
6 Clock
7 Main display
8 The left selection key is Go to or a
shortcut to another function.
See “Left selection key,” p. 54.
9 The middle selection key mode is Menu.
18
Y o u r p h o n e
10 The right selection key may be Names to access the list of
contacts in the Contacts menu, an operator-specific name to access
an operator-specific Web site, or a shortcut to a function that you
selected. See “Right selection key,”p. 54.
Active standby
In the active standby mode there is a list of selected phone features
and information on the screen that you can directly access in the
standby mode. To switch on or off the mode, select Menu >
Settings > Main display > Active standby > Active standby mode > On
or Off.
In the active standby mode, scroll up or down to navigate the list.
Left and right arrows at the beginning and end of a line indicate that
further information is available by scrolling left or right. To end the
active standby navigation mode, select Exit.
To organize and change the active standby mode, activate the
navigation mode, and select Options > Personalise.
Indicators
You have unread messages.
You have unsent, canceled or failed messages.
The phone registered a missed call.
,
Your phone is connected to the instant messaging service,
and the availability status is online or offline.
You received one or several instant messages.
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
19
Y o u r p h o n e
,
The phone is registered to the GPRS or EGPRS network.
,
A GPRS or EGPRS connection is established.
The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
,
,
Push to talk connection is active or suspended.
If you have two phone lines, the second phone line is
selected.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected
to the phone.
Calls are limited to a closed user group.
The timed profile is selected.
,
,
, or
A headset, hands-free, loopset, or music stand enhancement
is connected to the phone.
■ Flight mode
You can deactivate all radio frequency functionality and still have
access to offline games, calendar, and phone numbers. Use the flight
mode in radio sensitive environments—on board aircraft or in
hospitals. When the flight mode is active,
is shown.
Select Menu > Settings > Profiles > Flight > Activate or Personalise.
To deactivate the flight mode, select any other profile.
In the flight mode you can make an emergency call. Enter the
emergency number, press the call key, and select Yes when asked Exit
flight profile? The phone attempts to make an emergency call.
When the emergency call ends, the phone automatically changes to
the general profile mode.
20
Y o u r p h o n e
■ Keypad lock (keyguard)
Select Menu or Unlock and then press the * key within 1.5 seconds to
lock or unlock the keypad.
If the security keyguard is activated, enter the security code if
requested.
To answer a call when the keyguard is on, press the call key or open
the phone. When you end or reject the call, the keypad automatically
locks.
For Security keyguard, see “Phone,” p. 61.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device.
■ Functions used without a SIM card
Several functions of your phone may be used without installing a SIM
card (for example the data transfer with a compatible PC or another
compatible device). Some functions appear dimmed in the menus and
cannot be used.
For an emergency call, some networks may require that a valid SIM card is
properly inserted in the device.
21
C a l l f u n c t i o n s
3. Call functions
■ Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix
(the + character replaces the international access code), enter the
country code, the area code without the leading 0, if necessary,
and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to
decrease press the volume down key.
3. To end the call or to cancel the call attempt, press the end key, or
close the phone.
To search for a name or phone number that you have saved in
Contacts, see “Search for a contact,” p. 47. Press the call key to call
the number.
To access the list of dialed numbers, press the call key once in the
standby mode. To call the number, select a number or name, and press
the call key.
Speed dialing
Assign a phone number to one of the speed-dialing keys, 3 to 9. See
“Speed dials,” p. 50. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
• If Speed dialling is set to On, press and hold a speed-dialing key
until the call begins. See Speed dialling in “Call,” p. 60.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the
contact list of the phone. Voice commands are language-dependent.
To set the language, see Voice playback lang. in “Phone,” p. 61.
22
C a l l f u n c t i o n s
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice
dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or
press and hold the volume down key. A short tone is played, and
Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was
successful, a list with matches is shown. The phone plays the voice
command of the match on the top of the list. If the result is not
the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See Voice commands in “My shortcuts,”
p. 55 .
■ Answer or reject a call
To answer an incoming call, press the call key, or open the phone. To
end the call, press the end key or close the phone.
To reject an incoming call, press the end key or close the phone.
To reject an incoming call when the phone is closed, press and hold a
volume key.
To mute the ringing tone, press a volume key when the phone is
closed, or select Silence when the phone is open.
Call waiting
To answer the waiting call during an active call, press the call key.
The first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see “Call,” p. 60.
■ Options during a voice call
Many of the options that you can use during a call are network
services. For availability, contact your service provider.
During a call, select Options and from the following:
23
C a l l f u n c t i o n s
Call options are Mute or Unmute, Contacts, Menu, Lock keypad,
Record, Loudspeaker or Handset.
Network services options are Answer or Reject, Hold or Unhold, New
call, Add to conference, End call, End all calls, and the following:
Send DTMF — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect
yourself
Conference — to make a conference call
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
■ Make a video call
When you make a video call, you send a real-time video to the
recipient of the call. The video image captured by the camera on the
back of your phone is shown to the video call recipient.
To be able to make a video call, you must have a USIM card and be
connected in a WCDMA network. For availability of and subscription
to video call services, contact your network operator or service
provider. A video call can only be made between two parties. The
video call can be made to a compatible phone or an ISDN client. Video
calls cannot be made while another voice, video, or data call is active.
1. To start a video call, enter the phone number in the standby mode,
or select Contacts and a contact.
2. Press and hold the call key, or select Options > Video call.
Starting a video call may take a while. Video call and an outgoing
animation is shown. If the call is not successful (for example,
video calls are not supported by the network, or the receiving
device is not compatible) you are asked if you want to try a normal
call or send a message instead.
Tip: To increase or decrease the volume during a call, press
the volume keys.
24
C a l l f u n c t i o n s
The video call is active when you can see two video images and
hear the sound through the loudspeaker. The call recipient may
deny the video sending, in which case you may see a still image or
a grey background graphic. You will hear the sound.
3. To end the call, press the end key.
■ Answer or reject a video call
When a video call arrives, Video Call is displayed.
1. Press the call key to answer the video call. Allow video image to be
sent to caller? is displayed.
If you select Yes, the image being captured by the camera in your
phone is shown to the caller. If you select No, or do nothing, video
sending is not activated, and you hear a sound. A graphic is
displayed on top of the video, indicating that it is not sent. You
can enable or disable video sending at any time during the video
call.
2. To end the video call, press the end key.
Even when you deny video sending during a video call, the call is still
charged as a video call. Check the pricing with your network operator
or service provider.
■ Options during a video call
Select Options during a video call for the following options: Set
contrast, Video motion, Switch to voice call, End call, Send DTMF and
Loudspeaker.
■ Video sharing
During an ongoing voice call you can share your live camera view
with the call recipient. To share a video the recipient must have a
compatible mobile device, and a SIP address in your phonebook. If the
recipient’s SIP address is missing, enter it.
Select Options > Video sharing. The phone sends an invitation and the
Sending invitation to is shown on your display. If the recipient accepts,
25
C a l l f u n c t i o n s
your display shows Start sharing video? , press Yes and the phone
starts sending the video. Audio is routed to the loudspeaker.
To pause video sharing press Pause. The middle selection key is
changed to Continue.
To resume the video sharing press Continue. The middle selection key
is changed to Pause.
To end a video sharing session press Stop, and Video sharing ended is
shown to both participants.
To check availability and costs, and to subscribe to the service,
contact your network operator or service provider.
26
W r i t e t e x t
4. Write text
You can enter text (for example, when writing messages) using
traditional or predictive text input. When you write text, press and
hold Options to toggle between traditional text input, indicated by
, and predictive text input, indicated by
are supported by predictive text input.
. Not all languages
The character cases are indicated by
character case, press #. To change from the letter to number mode,
indicated by , press and hold #, and select Number mode. To
,
, and
. To change the
change from the number to the letter mode, press and hold #.
To set the writing language, select Options > Writing language.
■ Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character
appears. The characters available depend on the selected writing
language. If the next letter you want is located on the same key as
the present one, wait until the cursor appears and enter the letter.
The most common punctuation marks and special characters are
available under the number key 1.
■ Predictive text input
Predictive text input is based on a built-in dictionary to which you
can also add new words.
1. Start writing a word using the keys 2 to 9. Press each key only
once for one letter. The phone displays * or the letter if it
separately has a meaning as a word. The entered letters are
displayed underlined.
2. When you finish writing the word and it is correct, confirm it by
adding a space, press 0.
If the word is not correct, press * repeatedly, and select the word
from the list.
27
W r i t e t e x t
If the ? character is displayed after the word, the word you
intended to write is not in the dictionary. To add the word to the
dictionary, select Spell. Enter the word using traditional text
input, and select Save.
To write compound words, enter the first part of the word, and
press the scroll key right to confirm it. Write the last part of the
word, and confirm the word.
3. Start writing the next word.
28
N a v i g a t e t h e m e n u s
5. Navigate the menus
The phone offers you an extensive range of functions, which are
grouped into menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List,
Grid, Grid with labels, or Tab.
To rearrange the menu, scroll to the menu you want to move, and
select Options > Organise > Move. Scroll to where you want to
move the menu, and select OK. To save the change, select Done >
Yes.
2. Scroll through the menu, and select an option (for example,
Settings).
3. If the selected menu contains further submenus, select the one
that you want (for example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the
menu, select Exit.
29
M e s s a g i n g
6. Messaging
You can read, write, send, and save text, multimedia, e-mail, audio,
flash messages and postcards. All messages are organized into
folders.
■ Text message (SMS)
With the short message service (SMS) you can send and receive text
messages, and receive messages that can contain pictures (network
service).
Before you can send any text or SMS e-mail messages, you must save
your message center number. See “Message settings,” p. 43.
To check SMS e-mail service availability and to subscribe to the
service, contact your service provider. To save an e-mail address in
Contacts, see “Save details,” p. 47.
Your device supports the sending of text messages beyond the character limit
for a single message. Longer messages will be sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options like
Chinese, take up more space limiting the number of characters that can be
sent in a single message.
An indicator at the top of the display shows the total number of
characters left and the number of messages needed for sending. For
example, 673/2 means that there are 673 characters left and that the
message will be sent as a series of two messages.
Write and send a message
1. Select Menu > Messaging > Create message > Text message.
2. Enter one or more phone numbers or e-mail addresses in the To:
field. To retrieve a phone number or e-mail address from a
memory, select Add.
3. For an SMS e-mail, enter a subject in the Subject: field.
4. Write your message in the Message: field.
30
M e s s a g i n g
5. To send the message, select Send. See “Message sending,”p. 32.
Read and reply to a message
1. To view a received message, select Show. To view it later, select
Exit.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply > Text message, Multimedia,
Flash message, or Audio message. Write the reply message.
3. To send the message, select Send. See “Message sending,” p. 32.
■ Multimedia message (MMS)
Note: Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message may vary
depending on the receiving device.
A multimedia message can contain some attachments.
To check availability and to subscribe to the multimedia messaging
network service, contact your service provider.
Write and send a multimedia message
The wireless network may limit the size of MMS messages. If the inserted
image exceeds this limit, the device may make it smaller so that it can be sent
by MMS.
1. Select Menu > Messaging > Create message > Multimedia.
2. Write your message. To add a file, select Insert and from the
options.
3. To view the message before sending it, select Options > Preview.
4. To send the message, select Send. See “Message sending,” p. 32.
5. Enter one or more phone numbers or e-mail addresses in the To:
field. To retrieve a phone number or e-mail address from a
memory, select Add.
6. To send the message, select Send. See “Message sending,” p. 32.
31
M e s s a g i n g
Write and send a multimedia plus message
The wireless network may limit the size of MMS messages. If the inserted
image exceeds this limit, the device may make it smaller so that it can be sent
by MMS.
1. Select Menu > Messaging > Create message > Multimedia plus.
2. Enter one or more phone numbers or e-mail addresses in the To:
field. To retrieve a phone number or e-mail address from a
memory, select Add.
3. Enter a subject and write your message.
4. To add a file, select Insert.
5. To view the message before sending it, select Options > Preview.
6. To send the message, select Send. See “Message sending,” p. 32.
Message sending
Copyright protections may prevent some images, music (including ringing
tones), and other content from being copied, modified, transferred or
forwarded.
To send the message, select Send. The phone saves the message in the
Outbox folder, and the sending starts.
Note: When the phone is sending the message, the animated
is
shown. This is an indication that the message has been sent by your
device to the message center number programmed into your device.
This is not an indication that the message has been received at the
intended destination. For more details about messaging services,
check with your service provider.
If an interruption occurs while the message is being sent, the phone
tries to resend the message a few times. If these attempts fail, the
message remains in the Outbox folder. To cancel the sending of the
messages in the Outbox folder, scroll to the desired message, and
select Options > Cancel sending.
32
M e s s a g i n g
Read and reply to a message
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
1. To view a received message, select Show. To view it later, select
Exit.
2. To view the whole message if the received message contains a
presentation, select Play.
To view the files in the presentation or the attachments, select
Options > Objects or Attachments.
3. To reply to the message, select Options > Reply > Text message,
Multimedia, Postcard, Flash message, or Audio message. Write the
reply message.
4. To send the message, select Send.
■ Postcards
Note: This feature may not be available in your product due
to your subscription (network service).
With the postcard messaging service (network service), create and
send postcards that may contain an image and a greeting text. The
postcard is sent to the service provider using multimedia messaging.
The service provider prints the postcard and sends it to the postal
address given with the message. Multimedia messaging service must
be activated before this service can be used.
Before you can use the postcard service you must subscribe to the service. To
check the availability, and costs, and to subscribe to the service, contact your
network operator or service provider.
To send a postcard, select Menu > Messaging > Create message >
Postcard. Fill in the address, mandatory editor fields are marked by a
*. Scroll to the image field, select Insert and an image from the
Gallery, or New image to insert a recent image; then write your
greeting text. To send the message, select Send.
33
M e s s a g i n g
■ Flash messages
Flash messages are text messages that are instantly displayed upon
reception. Flash messages are not automatically saved.
Write a message
Select Menu > Messaging > Create message > Flash message. Enter
the recipient’s phone number and write your message. To insert a
blinking text into the message, select Options > Insert blink charact.
to set a marker. The text behind the marker blinks until a second
marker is inserted.
Receive a message
A received flash message is indicated with Message: and a few words
from the beginning of the message. To read the message, select Read.
To extract numbers and addresses from the current message, select
Options > Use detail. To save the message, select Save and the folder
in which you want to save it.
■ Nokia Xpress audio messaging
You can use the multimedia message service to create and send a
audio message in a convenient way. Multimedia messaging service
must be activated before you can use audio messages.
Create a message
1. Select Menu > Messaging > Create message > Audio message. The
recorder opens. To use the recorder, see “Voice recorder,” p. 74.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to
retrieve a number.
4. To send the message, select Send.
34
M e s s a g i n g
Listen to a message
To open a received audio message, select Play. If more than one
message is received, select Show > Play. To listen to the message
later, select Exit.
■ Memory full
When you receive a message, and the memory for the messages is
full, Memory full. Unable to receive messages. is shown. To first delete
old messages, select OK > Yes and the folder. Scroll to the desired
message, and select Delete. If more messages are to be deleted, select
Mark. Mark all the messages you want to delete, and select Options >
Delete marked.
■ Folders
The phone saves received messages in the Inbox folder.
Messages that have not yet been sent are saved in the Outbox folder.
To set the phone to save the sent messages in the Sent items folder,
see Save sent messages in “General settings,” p. 43.
To edit and send messages that you have written and saved in the
Drafts folder, select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize
your Saved items subfolders, select Menu > Messaging > Saved items.
To add a folder, select Options > Add folder. To delete or rename a
folder, scroll to the desired folder, and select Options > Delete folder
or Rename folder.
Your phone has templates. To create a new template, save a message
as a template. To access the template list, select Menu > Messaging >
Saved items > Templates.
■ E-mail application
The e-mail application uses a packet data connection (network
service) to allow you to access your e-mail account. This e-mail
35
M e s s a g i n g
application is different from the SMS e-mail function. To use the
e-mail function on your phone, you need a compatible e-mail system.
You can write, send, and read e-mail with your phone. Your phone
supports POP3 and IMAP4 e-mail servers. This application does not
support keypad tones.
Before you can send and retrieve any e-mail messages, you must
obtain a new e-mail account or use your current account. To check
the availability of your e-mail account, contact your e-mail service
provider.
Check your e-mail settings with your e-mail service provider. You
may receive the e-mail configuration settings as a configuration
message. See “Configuration settings service,” p. 10.
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See “E-mail messages,” p. 45.
Setting Wizard
The setting wizard will start automatically if no e-mail settings are
defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage accounts > Options > New.
The Manage accounts options allow you to add, delete, and change
the e-mail settings. Make sure that you have defined the correct
preferred access point for your operator. See “Configuration,” p. 63.
The e-mail application requires an Internet access point without a
proxy. WAP access points normally include a proxy and do not work
with the e-mail application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail
service; or connect to the service first, then write and send your
e-mail.
1. Select Menu > Messaging > E-mail > Write new e-mail.
2. If more than one e-mail account is defined, select the account
from which you want to send the e-mail.
36
M e s s a g i n g
3. Enter the recipient’s e-mail address, write the subject, and enter
the e-mail message. To attach a file from Gallery, select Options >
Attach file.
4. To send the e-mail message, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select
Send > Send later.
To edit or continue writing your e-mail later, select Options >
Save as draft. The e-mail is saved in Outboxes > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail >
Options > Send now or Send/check e-mail.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail
account, select Menu > Messaging > E-mail > Check new e-mail.
If more than one e-mail account is defined, select the account
from which you want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back > Inboxes, the account name, and the new message,
and select Retrieve to download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been
saved in the Outbox folder, select Options > Send/check e-mail
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail
messages may contain malicious software or otherwise be harmful to
your device or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name,
and the desired message.
2. To reply to an e-mail, select Reply > Original text or Empty
message. To reply to many, select Options > Reply to all. Confirm
or edit the e-mail address and subject, then write your reply.
3. To send the message, select Send > Send now.
37
M e s s a g i n g
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail
account in the Inboxes folder. The Outboxes folder contains the
following folders: “Account name” for incoming e-mail, Archive for
archiving e-mail, Custom 1—Custom 3 for sorting e-mail, Junk where
all spam e-mail is stored, Drafts for saving unfinished e-mail, Outbox
for saving e-mail that has not been sent, and Sent items for saving
e-mail that has been sent.
To manage the folders and their e-mail content, select Options to
view the available options of each folder.
Spam filter
To activate and define a spam filter, select Options > Spam filter >
Settings in the main e-mail idle screen. The spam filter allows you to
put specific senders on a black or white list. Black list sender
messages are filtered to the Junk folder. Unknown and White list
sender messages are downloaded into the account inbox. To blacklist
a sender, select the e-mail message in the Inboxes folder and
Options > Blacklist sender.
■ Instant messaging (IM)
With Instant messaging (network service) you can send short, simple
text messages to online users. You have to subscribe to a service and
register with the IM service you want to use. For more information
about signing up for IM services, contact your service provider.
To set the required settings for the IM service, see Connection settings
in “Access,” p. 38. The icons and texts on the display may vary,
depending on the IM service.
Note: Depending on your IM service, you may not have access
to all of the features described in this guide.
Access
Select Menu > Messaging > IMs. IMs may be replaced by another
term depending on the service provider. If more than one set of
38
M e s s a g i n g
connection settings for IM service is available, select the one you
want. Select from the following options:
Login — to connect to the IM service. To set the phone to
automatically connect to the IM service when you switch on the
phone; in the login session, select Automatic login: > On, or select
Menu > Messaging > IMs, connect to the IM service, and select
Options > Settings > Automatic login > On.
Saved conversations — to view, erase, or rename the conversations
that you saved during an IM session
Connection settings — to edit the settings needed for messaging and
presence connection
Connect
To connect to the service, access the instant messages menu, select
the IM service, if needed, and select Login.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the service your status as seen by others is shown
in a status line: My status: Online, My status: Busy or Status: Appear off.
— to change own status, select Change.
Below the status line there are three folders containing your contacts
and showing their status: Conversations, Online and Offline. To
expand the folder, scroll to it and select Expand (or press scroll right),
to collapse the folder select Collapse (or press scroll left).
Conversations — shows the list of new and read instant messages or
invitations to IM during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
39
M e s s a g i n g
The icons and texts on the display depends on the IM service.
Online — shows the number of contacts that are online
Offline — shows the number of contacts that are offline
To start a conversation, expand the Online or the Offline folder and
scroll to the contact with whom you would like to chat and select
Chat. To answer an invitation or to reply to a message expand the
Conversations folder and scroll to the contact to whom you would
like to chat and select Open. To add contacts, see “Add IM contacts,”
p. 41.
Groups > Public groups (not visible if groups are not supported by the
network) — the list of bookmarks to public groups provided by the
service provider is displayed. To start a IM session with a group, scroll
to a group, and select Join. Enter the screen name that you want to
use as your nickname in the conversation. When you have
successfully joined the group conversation, you can start a group
conversation. You can create a private group. See “Groups,” p. 41.
Search > Users or Groups — to search for other IM users or public
groups on the network by phone number, screen name, e-mail
address, or name. If you select Groups, you can search for a group by a
member in the group, or by group name, topic, or ID.
Options > Chat or Join group — to start the conversation when you
have found the user or the group that you want.
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than
one invitation is received, select an invitation and Open. To join the
private group conversation, select Accept, and enter the screen name
you want to use as your nickname. To reject or delete the invitation,
select Options > Reject or Delete.
Read an instant message
If you receive a new message that is not a message associated with an
active conversation, New instant message is displayed. To read it,
select Read. If more than one message is received, select a message,
and Open.
40
M e s s a g i n g
New messages received during an active conversation are held in
IMs > Conversations. If you receive a message from someone who is
not in IM contacts, the sender ID is displayed. To save a new contact
that is not in the phone memory, select Options > Save contact.
Participate in a conversation
To join or start an IM session, write your message; and select Send.
If you receive a new message during a conversation from a person
who is not taking part in the current conversation,
and the phone sounds an alert tone.
is displayed,
Write your message; and select Send. Your message is displayed, and
the reply message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu select
Options > Add contact > By mobile number, Enter ID manually, Search
from server, or Copy from server (depending on service provider).
Scroll to a contact. To start a conversation, select Chat.
Block or unblock messages
When you are in a conversation and want to block messages, select
Options > Block contact.
To block messages from a specific contact in your contacts list, scroll
to the contact in Conversations, Online or Offline and select Options >
Block contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked
list. Scroll to the contact you want to unblock and select Unblock >
OK.
Groups
You can use the public groups provided by the service provider, or
create your own private groups for an IM conversation.
41
M e s s a g i n g
Public
You can bookmark public groups that your service provider may
maintain. Connect to the IM service, and select Groups > Public
groups. Select a group, andJoin. If you are not in the group, enter
your screen name as your nickname for the group. To delete a group
from your list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Private
Connect to the IM service, and from the main menu select Options >
Create group. Enter the name for the group and the screen name that
you want to use as your nickname. Mark the private group members
in the contacts list, and write an invitation.
■ Voice messages
The voice mailbox is a network service and you may need to subscribe
to it. For more information contact your service provider.
To call your voice mailbox, select Menu > Messaging > Voice
messages > Listen to voice msgs.. To enter, search for, or edit your
voice mailbox number, select Voice mailbox no..
If supported by the network,
indicates new voice messages. To
call your voice mailbox number, select Listen.
■ Info messages
You can receive messages on various topics from your service
provider (network service). For more information, contact your
service provider. Select Menu > Messaging > Info messages and from
the options available.
■ Service commands
Write and send service requests (also known as USSD commands),
such as activation commands for network services, to your service
provider. Select Menu > Messaging > Serv. commands.
42
M e s s a g i n g
■ Delete messages
To delete messages, select Menu > Messaging > Delete messages > By
message to delete single messages, By folder to delete all messages
from a folder, or All messages.
■ SIM messages
SIM messages are specific text messages that are saved to your SIM
card. You can copy or move those messages to the phone memory,
but not vice versa. To read SIM messages, select Menu > Messaging >
Options > SIM messages.
■ Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and
from the following options:
Save sent messages > Yes — to set the phone to save the sent
messages in the Sent items folder
Overwriting in Sent > Allowed — to set the phone to overwrite the old
sent messages with the new ones when the message memory is full.
This setting is shown only if you set Save sent messages > Yes.
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the phone to replace character-based
smileys with graphical ones
Text messages
The text message settings affect the sending, receiving, and viewing
of text and SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and
from the following options:
43
M e s s a g i n g
Delivery reports > Yes — to ask the network to send delivery reports
about your messages (network service)
Message centres > Add centre — to set the phone number and name of
the message center that is required for sending text messages. You
receive this number from your service provider.
Msg. centre in use — to select the message center in use
E-mail msg. centres > Add centre — to set the phone numbers and
name of the e-mail center for sending SMS e-mails.
E-mail centre in use — to select the SMS e-mail message center in use
attempts to deliver your message
Messages sent via — to select the format of the messages to be sent:
Text, Paging, or Fax (network service)
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to
be sent as viewed. If you select Reduced, characters with accents and
other marks may be converted to other characters.
Rep. via same centre > Yes — to allow the recipient of your message to
send you a reply using your message center (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of
multimedia messages. You may receive the configuration settings for
multimedia messaging as a configuration message. See
“Configuration settings service,” p. 10. You can also enter the
settings manually. See “Configuration,” p. 63.
Select Menu > Messaging > Message settings > Multimedia messages
and from the following options:
Delivery reports > Yes — to ask the network to send delivery reports
about your messages (network service)
Img. size (MMS plus) — to set the image size in multimedia plus
messages.
44
M e s s a g i n g
Image size (MMS) — to set the image size in multimedia messages.
Default slide timing — to define the default time between slides in
multimedia messages
Allow MMS receptn. — to receive or block the multimedia message,
select Yes or No. If you select In home network, you cannot receive
multimedia messages when outside your home network. The default
setting of the multimedia message service is generally In home
network. The availability of this menu depends on your phone.
messages automatically, manually after being prompted, or to reject
the reception. This setting is not shown if Allow MMS receptn. is set to
No.
Allow adverts — to receive or reject advertisements. This setting is not
shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is
set to Reject.
Configuration sett. > Configuration — only the configurations that
support multimedia messaging are shown. Select a service provider,
Default, or Personal config. for multimedia messaging. Select Account
and a multimedia messaging service account contained in the active
configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You
may receive the settings as a configuration message. See
“Configuration settings service,” p. 10. You can also enter the
settings manually. See “Configuration,” p. 63.
Select Menu > Messaging > Message settings > E-mail messages and
from the following options:
Configuration — to select the set that you want to activate
Account — to select an account provided by the service provider
My name — to enter your name or nickname
E-mail address — to enter your e-mail address
45
M e s s a g i n g
Login information — to enter authentication information used when
retrieving incoming e-mail
Incoming mail sett. — to enter the number of mails that shall be
retrieved in maximum
Outgoing sett. (SMTP) — to enter SMTP (simple mail transfer protocol)
information and setting options used when sending e-mail
Displ. term. window > Yes — to perform manual user authentication
for intranet connections
46
C o n t a c t s
7. Contacts
You can save names and phone numbers (contacts) in
the phone memory and in the SIM card memory.
The phone memory may save contacts with additional details, such as
various phone numbers and text items. You can also save an image
for a limited number of contacts.
The SIM card memory can save names with one phone number
attached to them. The contacts saved in the SIM card memory are
indicated by
.
■ Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts,
or enter the first characters of the name you are searching for.
■ Save names and phone numbers
Names and numbers are saved in the used memory. To save a name
and phone number, select Menu > Contacts > Names > Options >
Add new contact.
■ Save details
In the phone memory you can save different types of phone numbers,
a tone or a video clip, and short text items for a contact.
The first number you save is automatically set as the default number,
and it is indicated with a frame around the number type indicator
(for example,
). When you select a name from contacts (for
example, to make a call), the default number is used unless you select
another number.
Make sure that the memory in use is Phone or Phone and SIM. See
“Settings,” p. 49.
Search for the contact to which you want to add a detail, and select
Details > Options > Add detail. Select from the options available.
47
C o n t a c t s
■ Copy or move contacts
You can move and copy contacts from the phone memory to the SIM
card memory, or vice versa. The SIM card can save names with one
phone number attached to them.
To move or copy contacts one by one, select Menu > Contacts >
Names. Scroll to the contact, and select Options > Move contact or
Copy contact.
To move or copy marked contacts, select Menu > Contacts > Names.
contacts, and select Options > Move marked or Copy marked.
To move or copy all contacts, select Menu > Contacts > Move
contacts or Copy contacts.
■ Edit contact details
Search for the contact, and select Details. To edit a name, number,
text item, or to change the image, select Options > Edit . To change
the number type, scroll to the desired number, and select Options >
Change type. To set the selected number as the default number, select
Set as default.
■ Synchronize all
Synchronize your calendar, contacts data, and notes with a remote
Internet server (network service). For details see “Synchronize from a
server,” p. 60.
■ Delete contacts
To delete all the contacts and the details attached to them from the
phone or SIM card memory, select Menu > Contacts > Del. all
contacts > From phone memory or From SIM card.
To delete a contact, search for the desired contact, and select
Options > Delete contact.
48
C o n t a c t s
To delete a number, text item, or an image attached to the contact,
search for the contact, and select Details. Scroll to the desired detail,
and select Options > Delete and from the options available.
■ Business cards
You can send and receive a person’s contact information from a
compatible device that supports the vCard standard as a business
card.
To send a business card, search for the contact whose information
you want to send, and select Details > Options > Send business card.
When you have received a business card, select Show > Save to save
the business card in the phone memory. To discard the business card,
select Exit > Yes.
■ Settings
Select Menu > Contacts > Settings and from the following options:
Memory in use — to select the SIM card or phone memory for your
contacts. Select Phone and SIM to recall names and numbers from
both memories. In that case, when you save names and numbers, they
are saved in the phone memory.
Contacts view — to select how the names and numbers in Contacts are
displayed
Name display — to select whether the contact’s first or last name is
displayed first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■ Groups
Select Menu > Contacts > Groups to arrange the names and phone
numbers saved in the memory into caller groups with different
ringing tones and group images.
49
C o n t a c t s
■ Speed dials
To assign a number to a speed-dialing key, select Menu > Contacts >
Speed dials, and scroll to the speed-dialing number that you want.
Select Assign, or if a number has already been assigned to the key,
select Options > Change. Select Search and the contact you want to
assign. If the Speed dialling function is off, the phone asks whether
you want to activate it. See also Speed dialling in “Call,” p. 60.
To make a call using the speed-dialing keys, see “Speed dialing,”
p. 22.
■ Info, service, and my numbers
Select Menu > Contacts and from one of these submenus:
Info numbers — to call the information numbers of your service
provider if the numbers are included on your SIM card (network
service)
Service numbers — to call the service numbers of your service provider
if the numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card,
if the numbers are included on your SIM card
50
L o g
8. Log
The phone registers your missed, received, and dialed calls if the
network supports it and the phone is switched on and within the
network service area.
To view the information on your calls, select Menu > Log > Missed
calls, Received calls, or Dialled numbers. To view your recent missed
and received calls and the dialed numbers chronologically, select Call
log. To view the contacts to whom you most recently sent messages,
select Msg. recipients.
To view the information on your recent communications, select
Menu > Log > Call duration, Data counter, or Pack. data timer.
To view how many text and multimedia messages you have sent and
received, select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
Some timers may be reset during service or software upgrades.
■ Position information
The network may send you a location request (network service).
Contact your service provider to subscribe and to agree upon the
delivery of location information.
To accept or reject the location request, select Accept or Reject. If you
miss the request, the phone automatically accepts or rejects it
according to what you have agreed with your network operator or
service provider. The phone displays 1 missed position request. To view
the missed location request, select Show.
To view the information on the 10 most recent privacy notifications
and requests or to delete them, select Menu > Log > Positioning >
Position log > Open folder or Delete all.
51
S e t t i n g s
9. Settings
■ Profiles
Your phone has various settings groups called profiles, for which you
can customize the phone tones for different events and
environments.
Select Menu > Settings > Profiles, the desired profile and from the
following options:
Activate — to activate the selected profile
Personalise — to personalize the profile. Select the setting you want
to change, and make the changes.
Timed — to set the profile to be active until a certain time up to
24 hours, and set the end time. When the time set for the profile
expires, the previous profile that was not timed becomes active.
■ Themes
A theme contains elements for personalizing your phone.
Select Menu > Settings > Themes and from the following options:
Select theme — to set a theme. A list of folders in Gallery opens. Open
the Themes folder, and select a theme.
Theme downloads — to open a list of links to download more themes
■ Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the
Profiles menu. See Personalise in “Profiles,” p. 52.
To set the phone to ring only for calls from phone numbers that
belong to a selected caller group, select Alert for. Scroll to the caller
group you want or All calls, and select Mark.
Select Options > Save to save the settings or Cancel to leave the
settings unchanged.
52
S e t t i n g s
If you select the highest ringing tone level, the ringing tone reaches its
highest level after a few seconds.
■ Main Display
Select Menu > Settings > Main display and from the available
options:
Wallpaper — to add the background image in the standby mode
Active standby — to switch the active standby mode on or off and to
organize and personalize the active standby mode.
Standby font colour — to select the color for the texts in the standby
mode
Navigation key icons — to display the icons of the current navigation
key shortcuts in the standby mode when active standby is off
Fold animation — to set your phone to display an animation when you
open and close the phone
Font size — to set the font size for messaging, contacts and web pages
Operator logo — to set your phone to display or hide the operator logo
Cell info display > On — to display the cell identity, if available from
the network
■ Settings
Note: This feature may not be available in your product due
to your subscription (network service).
Service — to switch service on or off
Edit channel list — to modify your channel subscription
News ticker speed — to select how fast the news ticker moves across
the phone’s display
No. of msgs. shown — to select number of messages shown in news
ticker
Use alternat. bearer — to select alternative method of message delivery
53
S e t t i n g s
■ Time and date
To change the time, time zone, and date settings, select Menu >
Settings > Time and date > Time, Date, or Auto-update of time
(network service).
When traveling to a different time zone, select Menu > Settings >
Time and date > Time > Time zone and the time zone of your location
in terms of the time difference with respect to Greenwich Mean Time
(GMT) or Universal Time Coordinated (UTC). The time and date are set
according to the time zone and enable your phone to display the
correct sending time of received text or multimedia messages. For
example, GMT -5 denotes the time zone for New York (USA), 5 hours
west of Greenwich/London (UK).
■ My shortcuts
With personal shortcuts you get quick access to often used functions
of the phone.
Left selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Left selection key.
If the left selection key is Go to to activate a function, in the standby
mode, select Go to > Options and from the following options:
Select options — to add a function to the shortcut list or to remove
one.
Organise — to rearrange the functions on your personal shortcut list.
Right selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Right selection key.
54
S e t t i n g s
Navigation key
To assign other phone functions from a predefined list to the
navigation key (scroll key), select Menu > Settings > My shortcuts >
Navigation key.
Voice commands
To call contacts and carry out phone functions, say the voice
commands. Voice commands are language-dependent. To set the
language, see Voice playback lang. in “Phone,” p. 61.
To select the phone functions to activate with voice commands,
select Menu > Settings > My shortcuts > Voice commands and a
folder. Scroll to a function.
indicates that the voice tag is
activated. To activate the voice tag, select Add. To play the activated
voice command, select Play. To use voice commands, see “Enhanced
voice dialing,” p. 22.
To manage the voice commands, scroll to a phone function, and
select from the following options:
Edit or Remove — to change or deactivate the voice command of the
selected function
Add all or Remove all — to activate or deactivate voice commands to
all functions in the voice commands list
■ Connectivity
You can connect the phone to a compatible device using a Bluetooth
wireless technology or a USB data cable connection. You can also
define the settings for EGPRS dial-up connections and set up the
phone to send and receive data through its infrared (IR) port to or
from a IRDA compatible phone or data device.
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 + EDR supporting
the following profiles: generic access, network access, generic object
exchange, hands-free, headset, object push, file transfer, dial-up networking,
SIM access, and serial port. To ensure interoperability between other devices
55
S e t t i n g s
supporting Bluetooth technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a
compatible Bluetooth device within 10 meters (32 feet). Since
devices using Bluetooth technology communicate using radio waves,
your phone and the other devices do not need to be in direct line-of-
sight, although the connection can be subject to interference from
obstructions such as walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the
following options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth
function.
indicates that Bluetooth is activated. When activating
Bluetooth technology for the first time, you are asked to give a name for
the phone. Use a unique name that is easy for others to identify.
Search audio enhanc. — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the phone.
Paired devices — to search for any Bluetooth device in range. Select
New to list any Bluetooth device in range. Select a device, and Pair.
Enter an agreed Bluetooth passcode of the device (up to 16
characters) to associate (pair) the device to your phone. You must
only give this passcode when you connect to the device for the first
time. Your phone connects to the device, and you can start data
transfer.
56
S e t t i n g s
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which
Bluetooth connection is currently active, select Active devices. To
view a list of Bluetooth devices that are currently paired with the
phone, select Paired devices.
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select
Menu > Settings > Connectivity > Bluetooth > Bluetooth settings >
My phone's visibility or My phone's name.
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Always accept only Bluetooth communication
from others with whom you agree.
Infrared
You can set up the phone to send and receive data through its
infrared (IR) port to or from a IRDA compatible phone or data device.
Do not point the IR beam at anyone's eyes or allow it to interfere with other IR
devices. Infrared devices are Class 1 laser products.
When sending or receiving data, ensure that the IR ports of the
sending and receiving devices are pointing at each other and that
there are no obstructions between the devices.
To activate/deactivate the IR port of your phone, select Menu >
Settings > Connectivity > Infrared.
If data transfer is not started within 2 minutes after the activation of
the IR port, the connection is cancelled and must be started again.
IR connection indicator
When
is shown continuously, the IR connection is activated, and
your phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other
device, or a connection has been lost.
57
S e t t i n g s
Packet data (GPRS)
General packet radio service (GPRS) is a network service that allows
mobile phones to send and receive data over an Internet protocol
(IP)-based network.
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data conn. and from the
following options:
When needed — to set the packet data connection to established
when an application needs it. The connection will be closed when the
application is terminated.
packet data network when you switch the phone on.
Modem settings
You can connect the phone using Bluetooth wireless technology or
USB data cable connection to a compatible PC and use the phone as a
modem to enable GPRS connectivity from the PC.
To define the settings for connections from your PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active
access point, and activate the access point you want to use. Select
Edit active access pt. > Packet data acc. pt., enter a name to change the
access point settings, and select OK. Select Packet data acc. pt., enter
the access point name (APN) to establish a connection to an network,
and select OK.
You can also set the EGPRS dial-up service settings (access point
name) on your PC using the Nokia Modem Options software. See
“Nokia PC Suite,” p. 97. If you have set the settings both on your PC
and on your phone, the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another
compatible device (for example, a mobile phone), a compatible PC, or
a remote Internet server (network service).
58
S e t t i n g s
Your phone allows data transfer with a compatible PC or another
compatible device when using the phone without a SIM card.
Transfer contact list
To copy or synchronize data from your phone, the name of the device
and the settings must be in the list of transfer contacts. If you receive
data from another device (for example, a compatible mobile phone),
the corresponding transfer contact is automatically added to the list,
using the contact data from the other device. Server sync and PC
synchronisation are the original items in the list.
To add a new transfer contact to the list (for example a mobile
phone), select Menu > Settings > Connectivity > Data transfer >
Options > Add transfer contact > Phone synchronisation or Phone
copy, and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the
transfer contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list,
select Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable
connection. The other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data
transfer and the transfer contact from the list, other than Server sync
or PC synchronisation. According to the settings, the selected data is
copied or synchronized.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts, install the
Nokia PC Suite software for your phone on the PC. Use Bluetooth
wireless technology or a USB data cable for the synchronization, and
start the synchronization from the PC.
59
S e t t i n g s
Synchronize from a server
To use a remote Internet server, subscribe to a synchronization
service. For more information and the settings required for this
service, contact your service provider. You may receive the settings as
a configuration message. See “Configuration settings service,” p. 10
and “Configuration,” p. 63.
To start the synchronization from your phone, select Menu >
Settings > Connectivity > Data transfer > Server sync. Depending on
the settings, select Initialising syn-chronisation or Initialising copy.
Synchronizing for the first time or after an interrupted
synchronization may take up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the phone
and a compatible PC or a printer supporting PictBridge. You can also
use the USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the
data cable. Confirm USB data cable connected. Select mode. and select
from the following options:
Nokia mode — to use the phone to interact with applications on a PC
that has Nokia PC Suite
Printing & Media — to use the phone with a PictBridge compatible
printer, or to connect the phone to a PC to synchronize it with
Wimdows Media Player (music, video)
Data storage — to connect to a PC that does not have Nokia software
and use the phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity >
USB data cable > Nokia mode, Printing & Media, or Data storage.
■ Call
Select Menu > Settings > Call and from the following options:
60
S e t t i n g s
Call divert — to divert your incoming calls (network service). You may
not be able to divert your calls if some call barring functions are
Anykey answer > On — to answer an incoming call by briefly pressing
any key, except the power key, the camera key, the left and right
selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt
Video-voice redial — to select whether the phone automatically makes
a voice call to the number to which a video call failed.
Voice clarity > Active — to enhance speech intelligibility especially in
noisy environments
Speed dialling > On — to dial the names and phone numbers assigned
to the speed-dialing keys 3 to 9 by pressing and holding the
corresponding number key
Call waiting > Activate — to have the network notify you of an
incoming call while you have a call in progress (network service). See
“Call waiting,” p. 23.
Summary after call > On — to briefly display the approximate
duration and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person
you are calling (network service). To use the setting agreed upon with
your service provider, select Set by network.
Answ. if fold opened > On — to answer an incoming call by opening
the fold
Video sharing > On — to share your live camera view with the call
recipient during an ongoing voice call. To check availability and costs,
and to subscribe to the service, contact your network operator or
service provider
■ Phone
Select Menu > Settings > Phone and from the following options:
61
S e t t i n g s
Language settings — to set the display language of your phone, select
Phone language. Automatic selects the language according to the
information on the SIM card. To select the USIM card language,
select SIM language. To set a language for the voice playback, select
Voice playback lang.. See “Enhanced voice dialing,” p. 22 and Voice
commands in “My shortcuts,” p. 54.
Memory status — to view the amount of used and available phone
memory
Automatic keyguard — to set the keypad of your phone to lock
automatically after a preset time delay when the phone is in the
standby mode and no function of the phone has been used. Select On,
and set the time.
Security keyguard — to set the phone to ask for the security code
when you unlock the keyguard. Enter the security code, and select
On.
Welcome note — to write the note that is shown when the phone is
switched on
Network mode — to select dual mode (UMTS and GSM), UMTS, or
GSM. You cannot access this option during an active call.
Operator selection > Automatic — to set the phone to automatically
select one of the cellular networks available in your area. With
Manual you can select a network that has a roaming agreement with
your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone > On— the phone plays a tone when it is switched on
Flight query > On— the phone asks every time when it is switched on
whether the flight profile shall be used. With flight profile all radio
connections are switched off. The flight profile should be used in
areas sensitive to radio emissions.
Confirm SIM actions — See “SIM services,” p. 89.
62
S e t t i n g s
■ Configuration
You can configure your phone with settings that are required for
certain services to function correctly. Your service provider may also
send you these settings. See “Configuration settings service,” p. 10.
Select Menu > Settings > Configuration and from the following
options:
Default config. sett. — to view the service providers saved in the
phone. To set the configuration settings of the service provider as
default settings, select Options > Set as default.
Activ. def. in all apps. — to activate the default configuration settings
for supported applications
Preferred access pt. — to view the saved access points. Scroll to an
access point, and select Options > Details to view the name of the
service provider, data bearer, and packet data access point or GSM
dial-up number.
Connect to support — to download the configuration settings from
your service provider
Device manager sett. — to allow or prevent the phone from receiving
phone software updates. This option may not be available, depending
on your phone.
Personal config. sett. — to add new personal accounts for various
services manually, and to activate or delete them. To add a new
personal account if you have not added any, select Add; otherwise,
select Options > Add new. Select the service type, and select and
enter each of the required parameters. The parameters differ
according to the selected service type. To delete or activate a personal
account, scroll to it, and select Options > Delete or Activate.
■ Security
When security features that restrict calls are in use (such as call barring,
closed user group, and fixed dialling) calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security and from the following options:
63
S e t t i n g s
PIN code request and UPIN code request — to set the phone to ask for
your PIN or UPIN code every time the phone is switched on. Some
SIM cards do not allow the code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when
using a specific phone feature which is protected by the PIN2 code.
Some SIM cards do not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls
from your phone (network service). A barring password is required.
Fixed dialling — to restrict your outgoing calls to selected phone
numbers if this function is supported by your SIM card. When the
fixed dialling is on, GPRS connections are not possible except while
sending text messages over a GPRS connection. In this case, the
recipient’s phone number and the message center number must be
included in the fixed dialling list.
and who can call you (network service)
Security level > Phone — to set the phone to ask for the security code
whenever a new SIM card is inserted into the phone. If you select
Memory, the phone asks for the security code when the SIM card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code,
PIN2 code, or barring password
Code in use — to select whether the PIN code or UPIN code should be
active
Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your phone. See
“Certificates,” p. 95.
Security module sett. — to view Secur. module details, activate Module
PIN request, or change the module PIN and signing PIN. See also
“Access codes,” p. 9.
64
S e t t i n g s
■ Digital rights management
Digital rights management (DRM) is copyright protection, designed
to prevent modification and to limit distribution of protected files.
When you download protected files, such as sound, video, themes, or
ringing tones to your phone, the files are free, but locked. You pay for
the key to activate the file, and the activation key is automatically
sent to your phone when you download the file.
To view the permissions for a protected file, scroll to the file, and
select Options > Activation keys. For example, you can see how many
times you can view a video or how many days you have left for
listening to a song.
To extend the permissions for a file, select Options and the
corresponding option for the file type, such as Activate theme. You
can send certain types of protected files to your friends, and they can
buy their own activation keys.
Copyright protections may prevent some images, music (including
ringing tones), and other content from being copied, modified,
transferred or forwarded.
This phone supports OMA DRM 1.0 and 2.0.
■ Restore factory settings
To reset some of the menu settings to their original values, select
Menu > Settings > Rest. factory sett.. Enter the security code. The
names and phone numbers saved in Contacts, are not deleted.
65
O p e r a t o r m e n u
10. Operator menu
This menu lets you access a portal to services provided by your
network operator. The name and the icon depend on the operator. For
more information contact your network operator. The operator can
update this menu with a service message. For more information, see
“Service inbox,” p. 93.
66
G a l l e r y
11. Gallery
In this menu you can manage images, video clips, music
files, themes, graphics, tones, recordings, and received files. These
files are stored in the phone memory or an attached microSD memory
card and may be arranged in folders.
Your phone supports an activation key system to protect acquired
content. Always check the delivery terms of any content and
activation key before acquiring them, as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringing
tones), and other content from being copied, modified, transferred or
forwarded.
To see the list of folders, select Menu > Gallery.
To see the available options of a folder, select a folder > Options.
To view the list of files in a folder, select a folder > Open.
To see the available options of a file, select a file > Options.
To view the folders of the memory card when moving a file, scroll to
the memory card, and press the scroll key right.
■ Print images
Your device supports Nokia XPressPrint. To connect it to a compatible
printer use a data cable or send the image via Bluetooth to a printer
supporting Bluetooth technology. See “Connectivity,” p. 55.
You can print images that are in the JPEG format. The images taken
with the camera are automatically saved in the JPEG format.
Select the image you want to print and Options > Print.
■ Memory card
Keep all memory cards out of the reach of small children.
67
G a l l e r y
You can use the microSD memory card to store your multimedia files
such as video clips, music tracks, and sound files, images, and
messaging data, and to back up information from phone memory.
Some of the folders in Gallery with content that the phone use, for
example, Themes, may be stored on a memory card.
To insert and remove the microSD memory card see “Insert a microSD
card,” p. 12.
Format the memory card
When a memory card is formatted, all data on the card is
permanently lost. Some memory cards are supplied preformatted and
others require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Menu >Gallery or Applications, the
memory card folder
, Options > Format memory card > Yes.
When formatting is complete, enter a name for the memory card.
Lock the memory card
To set a password to lock your memory card to help prevent
unauthorized use, select Options > Set password. The password can be
up to eight characters long.
The password is stored in your phone and you do not have to enter it
again while you are using the memory card on the same phone. If you
want to use the memory card on another phone, you are asked for the
password. To delete the password, select Options > Delete password.
Check memory consumption
To check the memory consumption of different data groups and the
available memory for installing new applications or software on your
memory card, select Options > Details.
68
M e d i a
12. Media
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others, including
copyrights.
You can take photos or record live video clips with the built-in 3 megapixel
camera with autofocus.
■ Camera
The camera produces pictures in .jpg format, and you can digitally
zoom up to eight times.
Take a photo
To open the camera viewfinder, select Menu > Media > Camera.
You can also take a photo when the phone is folded. Press left or
right selection keys and select Camera.
To zoom in and out in camera
mode, press volume keys up or
down.
To take an image, select Capture,
or press camera key. The phone
saves the images on the memory
card.
To autofocus, press camera key briefly. A white frame appears in
display.
Select Options to set Night mode on if the lighting is dim, Self-timer
on to activate the self-timer, Img. sequence on to take images in a
fast sequence. With the highest image size setting 3 images are taken
in a sequence, with other size settings 8 images are taken.
Select Options > Settings >Image preview time and a preview time to
display the taken images on the display. During the preview time,
select Back to take another image or Send to send the image as a
multimedia message.
69
M e d i a
Your device supports an image capture resolution of 1536 x 2048 pixels.
Camera and video options
To use a filter, select Options > Effects > Normal, Greyscale, Sepia,
Negative.
To change the camera and video settings, select Options > Settings.
■ Video
You can record video clips in .3gp format. Available recording time
depends on the video clip length and quality settings.
The length and file size of the clips may vary depending on the
selected quality and available memory. To set the quality of your
video clips, select Menu > Media > Video > Options > Settings >
Video clip quality > High, Normal or Basic.
To select the file size limit, select Menu > Media > Video > Options >
Settings > Video clip length. Default means that the file size is limited
so that it fits into a multimedia message (multimedia message size
can vary among devices). Maximum means that all available memory
is used. Available memory depends on where the video clip is stored.
Record a video clip
Select Menu > Media > Video >Record. You can also press and hold
the camera key. To pause the recording, select Pause; to resume the
recording, selectContinue. To stop the recording, selectStop. The
phone saves the recording in Gallery > Video clips.
To zoom in or out, press the volume key up or down, or scroll left and
right.
■ Media player
With the media player you can view, play, and download files, such as
images, audio, video, and animated images. You can also view
compatible streaming videos from a network server (network service).
70
M e d i a
Select Menu > Media > Media player > Open gallery, Bookmarks, Go to
address, or Media downloads to select or download media.
Select Menu > Media > Media player > FF/Rew interval to set the step
width for fast forward or rewind.
Configuration for a streaming service
You may receive the configuration settings required for streaming as
a configuration message from the service provider. See
“Configuration settings service,” p. 10. You can also enter the
settings manually. See “Configuration,” p. 63. To activate the
settings, do the following:
1. Select Menu > Media > Media player > Streaming settings >
Configuration.
2. Select a service provider, Default, or Personal config. for streaming.
3. Select Account and a streaming service account contained in the
active configuration settings.
■ Music player
Your phone includes a music player for listening to music tracks,
recordings or other MP3 or AAC sound files that you have transferred
to the phone with the Nokia Audio Manager application, which is
part of Nokia PC Suite. See “Nokia PC Suite,” p. 97.
Music files stored in a folder in the phone memory or in a folder of
the memory card, will automatically be detected and added to the
default track list.
To open the music player, select Menu > Media > Music player.
To open the music player when phone is folded, press left or right soft
key and select Music.
Playing the music tracks
Warning! Listen to music at a moderate level. Continuous exposure
to high volume may damage your hearing.
71
M e d i a
Operate the music player with the keys on the phone or with the
virtual keys on the display.
When you open the Music player menu, the details of the first track
on the default track list are shown. To play, select
.
To adjust the volume level, use the volume keys on the side of the
phone.
To pause the playing, select
To stop the playing, press and hold the end key
To skip to the next track, select . To skip to the beginning of the
previous track, select
To rewind the current track, select and hold
.
.
. To fast forward the
. Release the key at the position
current track, select and hold
you want.
Settings for the music player
Show tracks — View all the tracks available on the track list and play
the desired track. To play a track, scroll to the desired track, and
select Play.
If you select Options, you can refresh the track list (for example, after
adding new tracks to the list) and change the track list that is shown
when you open the music player menu if several track lists are
available in the phone. You also my send a track to another phone.
Music library — View the database of the available music tracks. You
can choose the music to listen to, and create and manage the content
of the library.
Play options — Select Random to play the tracks on the track list in
random order. Select Repeat to play the current track or the entire
track list repeatedly.
Media equaliser — Select or define an equalizer setting. See
“Equalizer,” p. 75.
Play via Bluetooth — Connect to a Bluetooth audio accessory.
72
M e d i a
Use tone — Set the the currently played music track, for example, as
ringing tone.
Web page — to access a Web page associated with the currently
played track. Dimmed if no Web page is available.
Music downloads— to connect to a browser service related to the
current track. This function is only available when the address of the
service is included in the track.
■ Radio
The FM radio depends on an antenna other than the wireless device’s antenna.
A compatible headset or enhancement needs to be attached to the device for
the FM radio to function properly.
Warning: Listen to music at a moderate level. Continuous exposure
to high volume may damage your hearing. Do not hold the device
near your ear when the loudspeaker is in use, because the volume
may be extremely loud.
Select Menu > Media > Radio.
To open the music player when phone is folded, press left or right
selection key and select Radio.
To use the graphical keys
,
,
, or
on the display, scroll left
or right to the desired key, and select it.
Save radio frequencies
1. To start the search, select and hold
or . To change the radio
frequency in 0.05 MHz steps, briefly press
or
.
2. To save a frequency to a memory location, 1 to 9, press and hold
the corresponding number key. To save a frequency to a memory
location from 10 to 20, press briefly 1 or 2, and press and hold the
desired number key, 0 to 9.
3. Enter the name of the radio station.
73
M e d i a
Listen to the radio
Select Menu > Media > Radio. To scroll to the desired frequency,
select
or
, or press the headset key. To select a radio station,
briefly press the corresponding number keys. To adjust the volume,
press the volume keys.
Select from the following options:
Switch off — to turn off the radio
Save station — to save a new station (shown if a new station is
detected)
Loudspeaker or Headset — to listen to the radio using the loudspeaker
or headset.
Mono output or Stereo output — to listen to the radio in monophonic
sound or in stereo
Stations — to select the list of saved stations. To delete or rename a
station, scroll to the desired station, and select Options > Delete
station or Rename. Select Visual service ID to enter a service ID given
by the visual radio service provider (network service)
Search all stations — to search for new radio stations
Set frequency — to enter the frequency of the desired radio station
Station directory — to activate the station directory to seek available
radio stations from the network and save them for later use.
Enable visual service — to allow or deny the viewing of visual content
of the current radio station (network service). To check the
availability and costs, and to get the necessary settings to your
phone, contact your service provider.
When an application using a packet data or HSCSD connection is
sending or receiving data, it may interfere with the radio.
■ Voice recorder
You can record pieces of speech, sound, or an active call, and save
them in Gallery. This is useful when recording a name and phone
number to write down later.
74
M e d i a
The recorder cannot be used when a data call or GPRS connection is active.
Record sound
1. Select Menu > Media > Voice recorder.
To use the graphical keys
,
, or
on the display, scroll left
or right to the desired key, and select it.
2. To start the recording, select . To start the recording during a
call, select Options > Record. While recording a call, all parties to
the call hear a faint beeping sound. When recording a call, hold
the phone in the normal position near to your ear. To pause the
recording, select
.
3. To end the recording, select
. The recording is saved in
Gallery > Recordings.
To listen to the latest recording, select Options > Play last
recorded.
To send the last recording, select Options > Send last recorded.
To see the list of recordings in Gallery, select Options > Recordings
list > Recordings.
■ Equalizer
You can control the sound quality when using the music player by
amplifying or diminishing frequency bands.
Select Menu > Media > Equaliser.
To activate a set, scroll to one of the equalizer sets, and select
Activate.
To view, edit, or rename a selected set, select Options > View, Edit, or
Rename. Not all sets can be edited or renamed.
75
O r g a n i z e r
13. Organizer
■ Alarm clock
You can set the phone to alarm at a desired time. Select Menu >
Organiser > Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To
change the alarm time when the alarm time is set, select On.
To set the phone to alert you on selected days of the week, select
Repeat alarm.
To select the alarm tone or set the radio as the alarm tone, select
Alarm tone. If you select the radio as an alarm tone, connect the
headset to the phone.
To set a snooze time-out, select Snooze time-out and the time.
Stop the alarm
The phone sounds an alert tone even if the phone was switched off.
To stop the alarm, select Stop. If you let the phone continue to sound
the alarm for a minute or select Snooze, the alarm stops for the time
you set in Snooze time-out, then resumes.
If the alarm time is reached while the device is switched off, the device
switches itself on and starts sounding the alarm tone. If you select Stop, the
device asks whether you want to activate the device for calls. Select No to
switch off the device or Yes to make and receive calls. Do not select Yes when
wireless phone use may cause interference or danger.
■ Calendar
Select Menu > Organiser > Calendar.
The current day is indicated by a frame. If there are any notes set for
the day, the day is in bold type, and the beginning of the note is
shown below the calendar. To view the day notes, select View. To view
a week, select Options > Week view. To delete all notes in the
76
O r g a n i z e r
calendar, select the month or week view, and select Options > Delete
all notes.
In Settings you can set the date, time, time zone, date or time format,
date separator, default view, or the first day of the week.
In Auto-delete notes you can set the phone to delete old notes
automatically after a specified time.
Make a calendar note
Select Menu > Organiser > Calendar. Scroll to the date, and select
Options > Make a note and one of the following note types:
Meeting,
Call,
Birthday,
Memo, or
Reminder. Fill in
the fields.
Note alarm
The phone displays the note and if set, sounds a tone. With a call note
on the display, to call the displayed number, press the call key. To
stop the alarm and to view the note, select View. To stop the alarm
for 10 minutes, select Snooze.
To stop the alarm without viewing the note, select Exit.
■ To-do list
To save a note for a task that you must do, select Menu > Organiser >
To-do list.
To make a note if no note is added, select Add; otherwise, select
Options > Add. Fill in the fields, and select Save.
To view a note, scroll to it, and select View. While viewing a note, you
can also select an option to edit the attributes. You can also select an
option to delete the selected note and delete all the notes that you
have marked as done.
■ Notes
To write and send notes, select Menu > Organiser > Notes.
77
O r g a n i z e r
To make a note if no note is added, select Add; otherwise, select
Options > Make a note. Write the note, and select Save.
■ Calculator
The calculator in your phone provides basic arithmetic and
trigonometric functions, calculates the square and the square root,
the inverse of a number, and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > Organiser > Calculator. When 0 is displayed on the
screen, enter the first number in the calculation. Press # for a decimal
point. Scroll to the desired operation or function or select it from the
Options. Enter the second number. Repeat this sequence as many
times as it is necessary. To start a new calculation, first select and
hold Clear.
To perform a currency conversion, select Menu > Organiser >
Calculator. To save the exchange rate, select Options > Exchange rate.
Select either of the displayed options. Enter the exchange rate, press
# for a decimal point, and select OK. The exchange rate remains in
the memory until you replace it with another one. To perform the
currency conversion, enter the amount to be converted, and select
Options > In domestic or In foreign.
Note: When you change base currency, you must enter new
exchange rates because all previously set exchange rates are cleared.
■ Countdown timer
To start the countdown timer, select Menu > Organiser > Countd.
timer > Normal timer, enter the alarm time, and write a note text that
is displayed when the time expires. To start the countdown timer,
select Start. To change the countdown time, select Change time. To
stop the timer, select Stop timer.
To have an interval timer with up to 10 intervals started, first enter
the intervals. Select Menu > Organiser > Countd. timer > Interval
timer. To start the timer, select Start timer > Start.
78
O r g a n i z e r
■ Stopwatch
You can measure time, take intermediate times, or take lap times
using the stopwatch. During timing, the other functions of the phone
can be used. To set the stopwatch timing in the background, press the
end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organiser > Stopwatch and from the following
options:
Split timing — to take intermediate times. To start the time
observation, select Start. Select Split every time that you want to
take an intermediate time. To stop the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new
time is added to the previous time. To reset the time without saving
it, select Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last — to view the most recently measured time if the
stopwatch is not reset
View times or Delete times — to view or delete the saved times
79
P u s h t o t a l k
14. Push to talk
Select Menu > Push to talk.
Push to talk (PTT) over cellular is a two-way radio service available
over a GPRS cellular network (network service).
You can use PTT to have a conversation with one person or with a
group of people (channel) having compatible devices. While you are
connected to the PTT service, you can use the other functions of the
phone.
To check availability and costs, and to subscribe to the service,
contact your network operator. Roaming services may be more
limited than for normal calls.
Before you can use the PTT service, you must define the required PTT
service settings. See “PTT settings,” p. 85 and “Configuration
settings,” p. 86.
■ Push to talk channels
A PTT channel comprises a group of people (for example, friends or a
workteam) who joined the channel after they where invited to. When
you call a channel, all members joined to the channel hear the call
simultaneously.
There are different types of PTT channels:
Public channel — Every channel member can invite other persons.
Private channel — Only persons which receive an invitation by the
channel creator can join in.
Provisioned channel — A permanent channel is created by the service
provider.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per
channel is limited. Contact your service provider for details.
80
P u s h t o t a l k
Create a channel
To add a channel, select Menu > Push to talk > Add channel and enter
the settings in the form fields:
Channel name: — Enter a name for the new channel.
Channel status: — Select Active to set the channel active, or Inactive
to disable the channel.
Nickname in channel: — Enter your nick name to be shown the new
channel.
Channel security: > Public channel or Private channel
Image: — Select Change and an image from the Gallery or the Default
graphic to set a graphic for the new channel.
To send an invitation to the channel, select Yes when the phone
requests it. The recipient of the invitation is added to the member list
of the channel when the invitation is accepted. To send further
invitations select Menu > Push to talk > Channel list, a channel, and
Options > Send invitation. To send the invitation use a text message
or IR.
To add a provisioned channel, select Menu > Push to talk > Add
channel > Options > Edit add. manually. Enter the Channel address:
provided by your service provider.
Receive an invitation
1. When you receive a text message invitation to a channel, Channel
invitation received: is displayed.
2. To view the nickname of the person who sent the invitation and
the channel address if the channel is not a private channel, select
View.
3. To add the channel to your phone, select Save.
4. To set the status for the channel, select Active or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard >
Yes.
81
P u s h t o t a l k
■ Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT
on, or press and hold the PTT (volume up) key.
indicates the PTT
connection. indicates that the service is temporarily unavailable.
If you have added channels to the phone, you are automatically
joined to the active channels.
You may assign a default function to the PTT (volume up) key to open
the channel list, the contacts list or a single channel or contact. See
“PTT settings,” p. 85.
To disconnect from the PTT service, select Switch PTT off.
■ Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple
recipients, you must hold the PTT (volume up) key as long as you talk.
To listen to the response, release the PTT (volume up) key.
You may be able to check the login status of your contacts in Menu >
Push to talk > Contacts list. This service depends on your network
operator and is only available for subscribed contacts. To subscribe a
contact, select Options >Subscribe contact, or if one or more contacts
are already marked Subscribe marked.
or
indicate that the person is either available or unknown.
indicates that the person wants not to be disturbed, but can
receive callback requests.
switched on.
indicates that the person has PTT not
Make a channel call
To make a call to a channel, select Channel list in the PTT menu, scroll
to the desired channel, and press and hold the PTT (volume up) key.
82
P u s h t o t a l k
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you have
added the PTT address, select Contacts > Names or Menu > Push to
talk > Contacts list. Scroll to a contact, and press and hold the PTT
(volume up) key.
To start a one-to-one call from the list of PTT channels, select
Channel list, scroll to the desired channel, and select Members. Scroll
to the desired contact, and press and hold the PTT (volume up) key.
To start a one-to-one call from the list of callback requests you have
received, select Callback inbox. Scroll to the desired nickname, and
press and hold the PTT (volume up) key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The
recipients receive an incoming call and need to accept the call in
order to participate. If supported by your network operator, you also
may select contacts with a phone number but without PTT number.
For details, contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired
contacts.
2. Press and hold the PTT (volume up) key to start the call. The
participating contacts are shown on the display, as soon as they
join the call.
3. Press and hold the PTT (volume up) key to talk to them. Release
the PTT (volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Informations, such
as the channel, the phone number, or the nickname (network service)
of the caller are displayed.
You can either accept or reject an incoming one-to-one call if you
have set the phone to first notify you of the one-to-one calls.
83
P u s h t o t a l k
When you press and hold the PTT (volume up) key while the caller is
talking, you hear a queuing tone, and Queuing is displayed. Press and
hold the PTT (volume up) key, and wait for the other person to finish;
then you can talk immediately.
■ Callback requests
If you make a one-to-one call and do not get a response, you can
send a request for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk
menu, select Contacts list. Scroll to a contact, and select Options >
Send PTT callback.
To send a callback request from Contacts, search for the desired
contact, and select Details. Scroll to the PTT address, and select
Options > Send PTT callback.
To send a callback request from the channel list in the PTT menu,
select Channel list, and scroll to the desired channel. Select Members,
scroll to the desired contact, and select Options > Send PTT callback.
To send a callback request from the callback request list in the Push to
talk menu, select Callback inbox. Scroll to a contact, and select
Options > Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback request received
is displayed in the standby mode.
To open the Callback inbox, select View. The list of nicknames of the
persons who have sent you callback requests is shown.
To make a one-to-one call, select the desired request and press and
hold the PTT (volume up) key.
To send a call request back to the sender, select Options > Send PTT
callback.
84
P u s h t o t a l k
To delete the request, select Delete.
To save a new contact or to add the PTT address to a contact from a
received callback request, select Options > Save as or Add to contact.
■ Add a one-to-one contact
You can save the names of persons to whom you often make one-to-
one calls in the following ways:
To add a PTT address to a name in Contacts, search for the desired
contact, select Details > Options > Add detail > PTT address. A contact
will only appear in the PTT contact list, if the PTT address is entered.
To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service,
select Channel list, and scroll to the desired channel. Select Members,
scroll to the member whose contact information you want to save,
and select Options. To add a new contact, select Save as. To add a PTT
address to a name in Contacts, select Add to contact.
■ PTT settings
Select Menu >Push to talk > PTT settings.
1 to 1 calls > On — to select the phone to allow the reception of
incoming one-to-one calls. To make but not receive one-to-one calls,
select Off. The service provider may offer some services that override
these settings. To set the phone to first notify you of incoming
one-to-one calls with a ringing tone, select Notify.
PTT key def. function — to set the PTT (volume up) key to following
functions: Open contact list, Open channel list, Call contact or group.
Select a contact, a group, or Call PTT channel and select a channel.
When you press and hold the PTT (volume up) key, the selected
function will be performed.
Show my login status — to enable or disable the sending of the login
status
85
P u s h t o t a l k
PTT status in startup > Yes or Ask first— to set the phone to
automatically connect to the PTT service when you switch the phone
on
PTT when abroad — to switch the PTT service on or off when the phone
is used outside of the home network
Send my PTT address > No — to hide your PTT address from channel
and one-to-one calls
■ Configuration settings
You may receive the settings for connecting to the service from your
service provider. See “Configuration settings service,” p. 10. You can
enter the settings manually. See “Configuration,” p. 63.
To select the settings for connecting to the service, select Menu >
Push to talk > Configuration sett.. Select from the following options:
Configuration — to select a service provider, Default, or Personal
config. for PTT service. Only the configurations that support the PTT
service are shown.
Account — to select a PTT service account contained in the active
configuration settings
Other parameters are PTT user name, Default nickname, PTT password,
Domain, and Server address.
■ Web
Select Menu > Push to talk > Web to access the Internet site of your
PTT provider.
86
A p p l i c a t i o n s
15. Applications
In this menu you can manage applications and games. These files are
stored in the phone memory or an attached microSD memory card
and may be arranged in folders.
For options to format or lock and unlock the memory card see
“Memory card,” p. 67.
■ Launch a game
Your phone software includes some games.
Select Menu > Applications > Games. Scroll to the desired game, and
select Open.
To set sounds, lights, and shakes for the game, select Menu >
Applications > Options > Application settings. For more options, see
“Some application options,” p. 87.
■ Launch an application
Your phone software includes some Java applications.
Select Menu > Applications > Collection. Scroll to an application, and
select Open.
■ Some application options
Update version — to check if a new version of the application is
available for download from Web (network service)
Web page — to provide further information or additional data for the
application from an Internet page (network service), if available
Application access — to restrict the application from accessing the
network.
87
A p p l i c a t i o n s
■ Download an application
Your phone supports J2ME Java applications. Make sure that the
application is compatible with your phone before downloading it.
Important: Only install and use applications and other software
from sources that offer adequate security and protection against
harmful software.
You can download new Java applications and games in different
ways.
Use the Nokia Application Installer from PC Suite to download the
applications to your phone, or select Menu > Applications >
Options > Downloads > App. downloads; the list of available
bookmarks is shown. See “Bookmarks,” p. 91.
For the availability of different services, pricing, and tariffs, contact
your service provider.
Your device may have some bookmarks loaded for sites not affiliated with
Nokia. Nokia does not warrant or endorse these sites. If you choose to access
them, you should take the same precautions, for security or content, as you
would with any Internet site.
88
S I M s e r v i c e s
16. SIM services
Your SIM card may provide additional services. You can
access this menu only if it is supported by your SIM card. The name
and contents of the menu depend on the available services.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other
vendor.
To set the phone to show you the confirmation messages sent
between your phone and the network when you are using the SIM
services, select Menu > Settings > Phone > Confirm SIM actions > Yes.
Accessing these services may involve sending messages or making a
phone call for which you may be charged.
89
W e b
17. Web
You can access various mobile Internet services with
your phone browser.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Check the availability of these services, pricing, tariffs, and
instructions with your service provider.
With the phone browser you can view the services that use wireless
markup language (WML) or extensible hypertext markup language
(XHTML) on their pages. Appearance may vary due to screen size. You
may not be able to view all details of the Internet pages.
■ Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from the service provider that offers the
service that you want to use. See “Configuration settings service,”
p. 10. You can also enter all the configuration settings manually. See
“Configuration,” p. 63.
■ Connect to a service
Ensure that the correct configuration settings of the service are
activated.
1. To select the settings for connecting to the service, select Menu >
Web > Settings > Configuration sett..
2. Select Configuration. Only the configurations that support
browsing service are shown. Select a service provider, Default, or
Personal config. for browsing. See “Set up browsing,” p. 90.
3. Select Account and a browsing service account contained in the
active configuration settings.
4. Select Displ. term. window > Yes to perform manual user
authentication for intranet connections.
90
W e b
Make a connection to the service in one of the following ways:
• Select Menu > Web > Home; or in the standby mode, press and
hold 0.
• To select a bookmark of the service, select Menu > Web >
Bookmarks.
• To select the last URL, select Menu > Web > Last web addr..
• To enter the address of the service, select Menu > Web > Go to
address. Enter the address of the service, and select OK.
■ Browse pages
After you make a connection to the service, you can start browsing its
pages. The function of the phone keys may vary in different services.
Follow the text guides on the phone display. For more information,
contact your service provider.
Browse with phone keys
To browse through the page, scroll in any direction.
To select an item, press the call key, or select Select.
To enter letters and numbers, press the 0 to 9 keys. To enter special
characters, press *.
Direct calling
While browsing, you can make a phone call, and save a name and a
phone number from a page.
■ Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Bookmarks; or in the standby
mode, select Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a
connection to the page associated with the bookmark.
91
W e b
3. Select Options to view, edit, delete, or send the bookmark; to
create a new bookmark; or to save the bookmark to a folder.
Your device may have some bookmarks loaded for sites not affiliated with
Nokia. Nokia does not warrant or endorse these sites. If you choose to access
them, you should take the same precautions, for security or content, as you
would with any Internet site.
Receive a bookmark
bookmark received is displayed. To view the bookmark, select Show.
■ Appearance settings
While browsing, select Options > Other options > Appearance
settings; or in the standby mode, select Menu > Web > Settings >
Appearance settings and from the following options:
Text wrapping — to select how the text shall appear on the display.
Font size — to set the font size
Show images > No — to hide images on the page.
Alerts > Alert for unsec. conn. > Yes — to set the phone to alert when a
secure connection changes to an unsecure one during browsing
Alerts > Alert for unsec. items > Yes — to set the phone to alert when a
secure page contains an unsecure item. These alerts do not guarantee
a secure connection. For more information, see “Browser security,”
p. 94.
Character encoding > Content encoding — to select the encoding for
the browser page content
Character encoding > Unicode (UTF-8) addr. > On — to set the phone
to send a URL as a UTF-8 encoding.
Screen size > Full or Small— to set the screen layout
JavaScript > Enable — to enable the Java scripts
92
W e b
■ Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone.
Cookies are saved until you clear the cache memory. See “Cache
memory,” p. 94.
While browsing, select Options > Other options > Security > Cookie
settings; or in the standby mode, select Menu > Web > Settings >
Security settings > Cookies. To allow or prevent the phone from
receiving cookies, select Allow or Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure
page. The phone supports WML scripts.
While browsing, to allow the scripts, select Options > Other options >
Security > WMLScript settings; or in the standby mode, select Menu >
Web > Settings > Security settings > WMLScripts in conn. > Allow.
■ Download settings
To automatically save all downloaded files in Gallery, select Menu >
Web > Settings > Downloading sett. > Automatic saving > On.
■ Service inbox
The phone is able to receive service messages sent by your service
provider (network service). Service messages are notifications (for
example, news headlines), and they may contain a text message or an
address of a service.
To access the Service inbox in the standby mode, when you have
received a service message, select Show. If you select Exit, the
message is moved to the Service inbox. To access the Service inbox
later, select Menu > Web > Service inbox.
To access the Service inbox while browsing, select Options > Other
options > Service inbox. Scroll to the message you want, and to
93
W e b
activate the browser and download the marked content, select
Retrieve. To display detailed information on the service notification
or to delete the message, select Options > Details or Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox sett..
To set whether you want to receive service messages, select Service
messages > On or Off.
To set the phone to receive service messages only from content
authors approved by the service provider, select Message filter > On.
To view the list of the approved content authors, select Trusted
channels.
To set the phone to automatically activate the browser from the
standby mode when the phone has received a service message, select
Autom. connection > On. If you select Off, the phone activates the
browser only after you select Retrieve when the phone has received a
service message.
■ Cache memory
A cache is a memory location that is used to store data temporarily. If you
have tried to access or have accessed confidential information requiring
passwords, empty the cache after each use. The information or services you
have accessed is stored in the cache.
To empty the cache while browsing, select Options > Other options >
Clear the cache; in the standby mode, select Menu > Web > Clear the
cache.
■ Browser security
Security features may be required for some services, such as online
banking or shopping. For such connections you need security
certificates and possibly a security module, which may be available on
your SIM card. For more information, contact your service provider.
94
W e b
Security module
The security module improves security services for applications
requiring a browser connection, and allows you to use a digital
signature. The security module may contain certificates as well as
private and public keys. The certificates are saved in the security
module by the service provider.
To view or change the security module settings, select Menu >
Settings > Security > Security module sett..
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased
security. The existence of a certificate does not offer any protection by itself;
the certificate manager must contain correct, authentic, or trusted
certificates for increased security to be available. Certificates have a restricted
lifetime. If Expired certificate or Certificate not valid yet is shown even if the
certificate should be valid, check that the current date and time in your device
are correct.
Before changing any certificate settings, you must make sure that you really
trust the owner of the certificate and that the certificate really belongs to the
listed owner.
There are three kinds of certificates: server certificates, authority
certificates, and user certificates. You may receive these certificates
from your service provider. Authority certificates and user
certificates may also be saved in the security module by the service
provider.
To view the list of the authority or user certificates downloaded into
your phone, select Menu > Settings > Security > Authority certificates
or User certificates.
is displayed during a connection, if the data transmission
between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is
stored) is secure. The service provider secures the data transmission between
the gateway and the content server.
95
W e b
Digital signature
You can make digital signatures with your phone if your SIM card has
a security module. Using the digital signature can be the same as
signing your name to a paper bill, contract, or other document.
To make a digital signature, select a link on a page, for example, the
title of the book you want to buy and its price. The text to sign, which
may include the amount and date, is shown.
Check that the header text is Read and that the digital signature icon
is shown.
If the digital signature icon does not appear, there is a security
breach, and you should not enter any personal data such as your
signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to
scroll through and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN. The
digital signature icon disappears, and the service may display a
confirmation of your purchase.
96
P C c o n n e c t i v i t y
18. PC connectivity
You can send and receive e-mail, and access the Internet when your
cable connection. You can use your phone with a variety of PC
connectivity and data communications applications.
■ Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes,
and to-do notes between your phone and the compatible PC or a
remote Internet server (network service). You may find more
information and PC Suite on the Nokia Web site at www.nokia.com/
support or your local Nokia Web site.
■ Packet data, HSCSD, and CSD
With your phone you can use the packet data, high-speed circuit
data services. For availability and subscription to data services,
contact your network operator or service provider. See “Modem
settings,” p. 58.
The use of HSCSD services consumes the phone battery faster than
normal voice or data calls.
■ Bluetooth
Use the Bluetooth technology to connect your compatible Laptop to
the Internet. Your phone must have activated a service provider that
supports Internet access and your PC has to support Bluetooth PAN
(Personal Area Network). After connecting to the network access
point (NAP) service of the phone and pairing with your PC your
phone automatically opens a packet data connection to the Internet.
PC Suite software installation is not necessary when using the NAP
service of the phone.
See “Bluetooth wireless technology,” p. 55.
97
P C c o n n e c t i v i t y
■ Data communication applications
For information on using a data communication application, refer to
the documentation provided with it.
Making or answering phone calls during a computer connection is
not recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a
stationary surface with the keypad facing downward. Do not move
the phone by holding it in your hand during a data call.
98
B a t t e r y i n f o r m a t i o n
19. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a
new battery is achieved only after two or three complete charge and discharge
cycles. The battery can be charged and discharged hundreds of times, but it
will eventually wear out. When the talk and standby times are noticeably
shorter than normal, replace the battery. Use only Nokia approved batteries,
and recharge your battery only with Nokia approved chargers designated for
this device.
If a replacement battery is being used for the first time or if the battery has
not been used for a prolonged period, it may be necessary to connect the
charger and then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use.
Do not leave fully charged battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal
strips on the battery.) This might happen, for example, when you carry a spare
battery in your pocket or purse. Short-circuiting the terminals may damage
the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always
try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with
a hot or cold battery may not work temporarily, even when the battery is fully
charged. Battery performance is particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
99
B a t t e r y i n f o r m a t i o n
■ Nokia battery authentication
Always use original Nokia batteries for your safety. To check that you are
getting an original Nokia battery, purchase it from an authorized Nokia
dealer, look for the Nokia Original Enhancements logo on the packaging, and
inspect the hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery
is not an authentic original Nokia battery, you should refrain from using it,
and take it to the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be verified, return the battery
to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol
from one angle and the Nokia Original
Enhancements logo when looking from another
angle.
2. When you angle the hologram left, right, down,
and up, you should see 1, 2, 3, and 4 dots on each
side respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210.
Turn the battery so that the numbers are facing
upwards. The 20-digit code reads starting from
the number at the top row followed by the bottom
row.
100
B a t t e r y i n f o r m a t i o n
4. Confirm that the 20-digit code is valid by
following the instructions at www.nokia.com/
batterycheck.
To create a text message enter the 20-digit code, for
example, 12345678919876543210, and send to +44
7786 200276.
To create a text message,
•
For countries in Asia Pacific, excluding India: Enter the 20-digit code, for
example, 12345678919876543210, and send to +61 427151515.
•
For India only: Enter Battery followed by the 20-digit battery code, for
example, Battery 12345678919876543210, and send to 5555.
National and international operator charges will apply.
You should receive a message indicating whether the code can be
authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label
is an authentic Nokia battery, please do not use the battery. Take it to the
nearest authorized Nokia service point or dealer for assistance. The use of a
battery that is not approved by the manufacturer may be dangerous and may
result in poor performance and damage to your device and its enhancements.
It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
101
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
•
Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the device in cold areas. When the device returns to its
normal temperature, moisture can form inside the device and damage
electronic circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and fine mechanics.
•
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the device.
Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
Do not touch the main display with hard or angular materials. Objects like
earrings or jewellery may scratch the display.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
102
C a r e a n d m a i n t e n a n c e
All of the above suggestions apply equally to your device, battery, charger, or
any enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
103
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions.
This device meets RF exposure guidelines when used either in the normal use
position against the ear or when positioned at least 1.5 centimeters (5/8
inch) away from the body. When a carry case, belt clip or holder is used for
body-worn operation, it should not contain metal and should position the
device the above-stated distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones,
may interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy or if you
have any questions. Switch off your device in health care facilities when any
regulations posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to external RF
energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
104
A d d i t i o n a l s a f e t y i n f o r m a t i o n
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
•
Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker to minimize the
potential for interference.
If you suspect interference, switch off your device, and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air
bag systems. For more information, check with the manufacturer or its
representative of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate
any warranty that may apply to the device. Check regularly that all wireless
device equipment in your vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive materials in the same
compartment as the device, its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may
be dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn off
105
A d d i t i o n a l s a f e t y i n f o r m a t i o n
your vehicle engine. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off the device at refueling
points such as near gas pumps at service stations. Observe restrictions on the
use of radio equipment in fuel depots, storage, and distribution areas;
chemical plants; or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always clearly marked.
They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), and areas
where the air contains chemicals or particles such as grain, dust, or metal
powders.
■ Emergency calls
Important: Wireless phones, including this device, operate using
radio signals, wireless networks, landline networks, and user-
programmed functions. Because of this, connections in all conditions
cannot be guaranteed. You should never rely solely on any wireless
device for essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in
the device.
2. Press the end key as many times as needed to clear the display and ready
the device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off
before you can make an emergency call. If the device is in the offline or flight
mode, you must change the profile to activate the phone function before you
can make an emergency call. Consult this guide or your service provider for
more information.
When making an emergency call, give all the necessary information as
accurately as possible. Your wireless device may be the only means of
communication at the scene of an accident. Do not end the call until given
permission to do so.
106
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement
known as the Specific Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of
tissue. Tests for SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in all tested
frequency bands. The actual SAR level of an operating device can be below the
maximum value because the device is designed to use only the power required
to reach the network. That amount changes depending on a number of factors
such as how close you are to a network base station. The highest SAR value
under the ICNIRP guidelines for use of the device at the ear is 0.41 W/kg.
Use of device accessories and enhancements may result in different SAR
values. SAR values may vary depending on national reporting and testing
requirements and the network band. Additional SAR information may be
provided under product information at www.nokia.com.
107
I n d e x
Index
making of 22
reject 23
A
access codes 9
accessories. See enhancements.
activation keys 65
active standby 19, 53
alarm clock 76
antenna 15
applications
voice dialing 22
camera
effects 70
filter 70
flash 17
collection 87
key 17
audio messages 34
certificates 95
B
certification information 107
character case 27
clock settings 54
codes 9
barring password 9
battery
authentication 100
charging 13
charging, discharging 99
installation 11
blacklist 38
Bluetooth 55, 97
bookmarks 91
browser
configuration 63
settings 14
contact information 10
contacts
copy 48
appearance settings 92
bookmarks 91
security 93
delete 48
edit 48
groups 49
set up 90
my numbers 50
save 47
business cards 49
search 47
C
service numbers 50
settings 49
cache memory 94
calculator 78
calendar 76
note 77
speed dialing 50
cookies 93
copyright protection 65
countdown timer 78
customer service 10
call
functions 22
key 16
log 51
D
options 23
settings 60
waiting 23
call register. See call log.
calls
data
communication 98
transfer 58
data cable 60
date settings 54
delete
answer 23
108
I n d e x
messages 43
IR 57
digital rights management 65
digital signature 96
display 16, 18
J
junk folder 38
downloading
protected files 65
downloads 10, 93
K
keyguard 21
keypad 16
E
keypad lock 21
keys
earpiece 16
EGPRS 58
e-mail application 35
emergency calls 106
end
keyguard 21
keypad 16
call 22
key 16
keypad lock 21
enhancements 8
equalizer 75
explosive environments 105
L
F
language settings 62
location information 51
log 51
factory settings 65
flash messages 34
FM radio 73
font size 53
M
G
main display 16, 18, 53
maintenance 102
media player 70
memory card 67
memory full 35
menu 29
gallery 67
games 87
GPRS 58
H
message
handsfree. See loudspeaker.
hearing aid 105
folder 35
message center number 30
message settings
e-mail 45
general settings 43
multimedia messages 44
text messages 43
messages
I
image 69
IMAP4 36
indicators 19
info messages 42
infrared connection 57
installation
audio message 34
delete 43
flash message 34
info messages 42
length indicator 30
message settings 43
postcards 33
battery 11
SIM card 11
instant messaging 38
Internet 90
109
I n d e x
service commands 42
PTT 80
text 30
Push to talk
see PTT
voice message 42
mini display 18
MMS. See multimedia messages.
multimedia messages 31
music player 71
pushed messages 93
R
radio 73
N
recorder 74
navigation 29
navigation key 16, 55
network
S
name on display 18
services 7
SAR 107
network mode 18
Nokia contact information 10
notes 77
scroll key. See navigation key.
security
calendar 77
numbers 50
codes 9
module 95
O
service
offline mode 21
operator menu 66
organizer 76
commands 42
inbox 93
numbers 50
services 90
P
pacemakers 104
packet data 58, 97
parts 16
settings
active standby 53
call 60
PC connectivity 97
PC Suite 97
camera 70
clock 54
phone
configuration 63
connectivity 55
data transfer 58
date 54
configuration 63
keys 16
open 14
parts 16
downloads 93
fold animation 53
GPRS, EGPRS 58
infrared 57
settings 61
phone lock. See keypad lock.
PictBridge 60
PIN codes 9, 14
plug and play service 14
POP3 36
IR 57
main display 53
messages 43
my shortcuts 54
phone 61
positioning 51
postcards 33
predictive text input 27
compound words 27
profiles 52
profiles 52
PTT 85
PTT configuration 86
protected files 65
110
restore factory settings 65
security 63
themes 52
time settings 54
to-do list 77
service inbox 94
themes 52
tones 52
traditional text input 27
time 54
tones 52
USB data cable 60
wallpaper 53
U
unlock keypad 21
UPIN 14
shared memory 8
shortcuts 54
signal strength 18
SIM
V
card 21
vehicles 105
voice
card installation 11
messages 43
commands 55
dialing 22
services 89
SMS. See text messages
spam filter 38
speed dialing 22, 50
standby mode 18, 54
status indicators 18
stopwatch 79
messages 42
recorder 74
volume key 16
W
strap 15
wallpaper 53
streaming service 71
switch on and off 14
swivel 53
Web 90
connect 90
wireless markup language 90
wrist strap 15
write text 27
synchronisation 58
T
X
take an image 69
text
XHTML 90
character case 27
predictive text input 27
compound words 27
traditional text input 27
writing 27
Z
zoom key 16
text message 30
111
|