Nokia 6800 User Manual

Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th

June, 1998"

User’s Guide for Nokia 6800

9354470

Issue 1

Contents

FOR YOUR SAFETY ..............................................................................................11

Access codes ........................................................................................................14

Overview of the phone functions ......................................................................16

Messaging concept ...................................................................................................................................16

Multimedia messaging service (MMS) ................................................................................................16

Polyphonic sound (MIDI) .........................................................................................................................16

General Packet Radio Service (GPRS) ..................................................................................................17

Loudspeaker ................................................................................................................................................18

MIDP JavaTM applications......................................................................................................................18

Stereo radio.................................................................................................................................................18

Over the Air (OTA) settings service.......................................................................................................18

Shared memory..........................................................................................................................................19

1. Your phone.......................................................................................................20

Keys (flip closed)........................................................................................................................................20

Connectors...................................................................................................................................................21

Keys (flip open)...........................................................................................................................................22

Standby mode.............................................................................................................................................23

Screen saver.............................................................................................................................................24

Wallpaper.................................................................................................................................................24

Essential indicators in standby mode...............................................................................................24

Headset.........................................................................................................................................................26

2. Getting started ................................................................................................28

Installing the SIM card and the battery..............................................................................................28

Charging the battery ................................................................................................................................31

Switching the phone on and off ...........................................................................................................31

Opening the flip.........................................................................................................................................33

Switching the keyboard lights on or off..........................................................................................36

Keypad lock (Keyguard) ...........................................................................................................................36

3. Call functions ..................................................................................................38

Making a call ..............................................................................................................................................38

Speed dialling a phone number .........................................................................................................39

Making a conference call ....................................................................................................................40

Answering or rejecting an incoming call............................................................................................41

Call waiting..............................................................................................................................................41

Options during a call................................................................................................................................42

Loudspeaker.............................................................................................................................................42

4. Writing text.....................................................................................................44

Writing text using the messaging keyboard......................................................................................44

Typing accented characters ................................................................................................................45

Writing text when the flip is closed ....................................................................................................46

Setting predictive text input on or off.............................................................................................46

Using predictive text input..................................................................................................................46

Writing compound words.................................................................................................................47

Using traditional text input ................................................................................................................47

Tips for writing text...............................................................................................................................48

5. Contacts ...........................................................................................................50

Selecting settings for contacts..............................................................................................................50

Saving names and phone numbers (Add contact) ...........................................................................51

Saving multiple numbers and text items per name.....................................................................51

Changing the default number.........................................................................................................52

Searching for a name in contacts.........................................................................................................53

Editing a name, number or text item ..................................................................................................53

Erasing names and numbers...................................................................................................................54

Copying contacts.......................................................................................................................................54

Sending and receiving a business card ...............................................................................................55

Speed dialling.............................................................................................................................................56

Info numbers...............................................................................................................................................56

Service numbers.........................................................................................................................................56

My numbers ................................................................................................................................................57

Caller groups...............................................................................................................................................57

6. Using the menu ...............................................................................................58

Accessing a menu function ....................................................................................................................58

List of menu functions.............................................................................................................................60

7. Menu functions...............................................................................................68

Messages (Menu 1)...................................................................................................................................68

Text messages (SMS service) ..............................................................................................................68

Writing and sending messages.......................................................................................................69

Options for sending a message.......................................................................................................69

Reading and replying to a message ..............................................................................................70

Inbox and sent items folders...........................................................................................................71

Templates .................................................................................................................................................71

Inserting a text template into a message....................................................................................72

Inserting a picture into a text message.......................................................................................72

Archive folder and my folders ............................................................................................................72

Distribution lists.....................................................................................................................................73

Multimedia messages ...........................................................................................................................73

Writing and sending a multimedia message ..............................................................................74

Reading and replying to a multimedia message .......................................................................76

Inbox, Outbox, Saved and Sent items folders.............................................................................77

Multimedia messages memory full ...............................................................................................77

Deleting messages .................................................................................................................................78

E-mail messages.....................................................................................................................................79

Writing and sending an e-mail.......................................................................................................79

Downloading e-mail messages from your e-mail account.....................................................80

Replying to an e-mail message......................................................................................................81

Inbox, Outbox, Deleted items, Sent items, Drafts and Archive folders ...............................81

E-mail settings ....................................................................................................................................82

Options available for an e-mail application...............................................................................84

Chat............................................................................................................................................................84

Voice messages.......................................................................................................................................85

Info messages..........................................................................................................................................86

Message settings....................................................................................................................................86

Settings for text messages...............................................................................................................87

Overwrite settings..............................................................................................................................88

Settings for multimedia messages ................................................................................................88

To receive the multimedia connection settings as a text message .....................................89

Font size setting.....................................................................................................................................90

Service commands.................................................................................................................................90

Call register (Menu 2) ..............................................................................................................................90

Recent calls lists.....................................................................................................................................91

Call counters and call timers..............................................................................................................91

Profiles (Menu 3).......................................................................................................................................93

Settings (Menu 4)......................................................................................................................................94

Time and date settings .........................................................................................................................94

Clock.......................................................................................................................................................94

Date........................................................................................................................................................95

Auto update of date and time ........................................................................................................95

Call settings.............................................................................................................................................95

Call divert..............................................................................................................................................95

Anykey answer.....................................................................................................................................96

Automatic redial.................................................................................................................................96

Speed dialling ......................................................................................................................................96

Call waiting..........................................................................................................................................97

Summary after call.............................................................................................................................97

Send my caller identity.....................................................................................................................97

Line for outgoing calls ......................................................................................................................97

Phone settings ........................................................................................................................................98

Language...............................................................................................................................................98

Memory status.....................................................................................................................................98

Security keyguard...............................................................................................................................98

Cell info display...................................................................................................................................99

Welcome note......................................................................................................................................99

Network selection...............................................................................................................................99

Confirm SIM service actions......................................................................................................... 100

Help text activation........................................................................................................................ 100

Start-up tone.................................................................................................................................... 100

Display settings.................................................................................................................................... 100

Wallpaper........................................................................................................................................... 100

Colour schemes................................................................................................................................ 101

Operator logo.................................................................................................................................... 101

Screen saver ..................................................................................................................................... 102

Display brightness ........................................................................................................................... 102

Tone settings ........................................................................................................................................ 102

Accessory settings............................................................................................................................... 103

Security settings.................................................................................................................................. 104

Restore factory settings.................................................................................................................... 105

Organiser (Menu 5)................................................................................................................................ 106

Alarm clock........................................................................................................................................... 106

Calendar................................................................................................................................................. 107

Making a calendar note................................................................................................................. 108

When the phone sounds an alarm for a note.......................................................................... 109

To-do list ............................................................................................................................................... 109

Notes (Menu 6) ....................................................................................................................................... 110

Radio (Menu 7)........................................................................................................................................ 111

Tuning a radio channel...................................................................................................................... 112

Using the radio .................................................................................................................................... 113

Gallery (Menu 8)..................................................................................................................................... 114

Games (Menu 9)...................................................................................................................................... 116

Launching a game............................................................................................................................... 116

Other options available for a game or game set.................................................................... 117

Game downloads................................................................................................................................. 117

Memory status for games................................................................................................................. 118

Game settings ...................................................................................................................................... 118

Applications (Menu 10) ........................................................................................................................ 118

Launching an application ................................................................................................................. 119

Other options available for an application or application set............................................ 119

Downloading an application............................................................................................................ 120

Memory status for applications...................................................................................................... 121

Extras (Menu 11).................................................................................................................................... 121

Calculator.............................................................................................................................................. 121

Perfoming a currency conversion ............................................................................................... 122

Wallet..................................................................................................................................................... 123

Saving and changing personal card information ................................................................... 123

Personal notes .................................................................................................................................. 124

Wallet settings ................................................................................................................................. 124

Guidelines for paying for your purchases with wallet.......................................................... 125

Synchronisation................................................................................................................................... 125

Synchronising from your phone.................................................................................................. 126

Saving the synchronisation settings received as a text message...................................... 127

Keying in the synchronisation settings manually .................................................................. 127

Synchronising from your PC......................................................................................................... 128

Countdown timer................................................................................................................................ 128

Stopwatch............................................................................................................................................. 129

Timing and split timing.................................................................................................................. 129

Lap timing.......................................................................................................................................... 130

Viewing and deleting times.......................................................................................................... 130

Connectivity (Menu 12)........................................................................................................................ 130

Infrared .................................................................................................................................................. 130

GPRS ....................................................................................................................................................... 132

WAP services (Menu 13)....................................................................................................................... 133

Basic steps for accessing and using WAP services.................................................................... 134

Setting up the phone for a WAP service...................................................................................... 134

Saving the service settings received as a text message....................................................... 134

Keying in the service settings manually ................................................................................... 135

Settings when GSM data is the selected data bearer .............................................................. 136

Settings when GPRS is the selected data bearer....................................................................... 137

Connecting to a WAP service.......................................................................................................... 138

Browsing the pages of a WAP service........................................................................................... 139

Using the phone keys while browsing....................................................................................... 139

Options while browsing................................................................................................................. 139

Direct calling..................................................................................................................................... 141

Ending a WAP connection................................................................................................................ 141

Appearance settings of the WAP browser ................................................................................... 141

Bookmarks............................................................................................................................................. 142

Receiving a bookmark .................................................................................................................... 142

Service inbox........................................................................................................................................ 143

Setting the phone to receive service messages...................................................................... 143

The cache memory.............................................................................................................................. 144

Browser security settings.................................................................................................................. 144

Security module............................................................................................................................... 144

Certificates ........................................................................................................................................ 145

Digital signature .............................................................................................................................. 147

Cookies................................................................................................................................................... 147

SIM services (Menu 14) ........................................................................................................................ 148

8. PC Connectivity ............................................................................................ 149

PC Suite..................................................................................................................................................... 149

GPRS, HSCSD and CSD ...................................................................................................................... 150

Using data communications applications ....................................................................................... 151

9. Battery information...................................................................................... 152

Charging and Discharging.................................................................................................................... 152

CARE AND MAINTENANCE.............................................................................. 154

IMPORTANT SAFETY INFORMATION............................................................... 155

Index.................................................................................................................. 161

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Don’t use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don’t use the phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don’t use the phone where blasting is in progress. Observe restrictions, and

follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don’t touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

BACKUP COPIES

Remember to make backup copies of all important data.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CALLING

Ensure the phone is switched on and in service. Enter the phone number,

including the area code, then press

call, press

. To end a call, press

. To answer a

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the

emergency number, then press

told to do so.

. Give your location. Do not end the call until

■ Network Services

The wireless phone described in this guide is approved for use on the EGSM 900 and GSM

1800 networks.

Dualband is a network dependent feature. Check with your local service provider if you can

subscribe to and use this feature.

A number of features included in this guide are called Network Services. These are special

services that you arrange through your wireless service provider. Before you can take

advantage of any of these Network Services, you must subscribe to them through your

service provider and obtain instructions for their use from your service provider.

Note: Some networks may not support all language-dependent characters and/or

services.

■ About accessories

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-7, ACP-8, ACP-12, LCH-9 and LCH-12.

Warning: Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types

may invalidate any approval or warranty applying to the phone, and may be

dangerous.

For availability of approved accessories, please check with your dealer.

When you disconnect the power cord of any accessory, grasp and pull the plug, not

the cord.

Access codes

• Security code (5 to 10 digits): The security code protects your phone against

unauthorised use, and is supplied with the phone. The preset code is 12345.

When you have changed the code, keep the new code secret and in a safe place

separate from your phone. To change the code, and to set the phone to request

it, see Security settings on page 104.

If you key in an incorrect security code five times in succession, the phone may

display Code error. Wait for five minutes and key in the code again.

• PIN code and PIN2 code (4 to 8 digits): The PIN (Personal Identification

Number) code protects your SIM card against unauthorised use. The PIN code

is usually supplied with the SIM card.

Set the phone to request the PIN code each time the phone is switched on, see

Security settings on page 104.

The PIN2 code may be supplied with the SIM card and is required to access

some functions, such as charging unit counters.

If you key in an incorrect PIN code three times in succession, the phone may

display PIN code blocked and ask you to key in the PUK code. Contact your

service provider to obtain the PUK code.

• PUK and PUK2 codes (8 digits): The PUK (Personal Unblocking Key) code is

required to change a blocked PIN code. The PUK2 code is required to change a

blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your local service

provider.

• Barring password (4 digits): The barring password is required when using the

Call barring service, see Security settings on page 104. You can obtain the

password from your service provider.

• Module PIN and signing PIN: The module PIN is required to access the

information in the security module. See Security module on page 144. The

signing PIN is needed for the digital signature. See Digital signature on page

147.

The module PIN and the signing PIN are supplied with the SIM card if the SIM

card has a security module in it.

If you key in an incorrect PIN code several times, the phone may display PIN

code blocked and ask you to key in the PUK code. Contact your service provider

to get the PUK code.

• Wallet code (4-10 digits): The wallet code is required to access the wallet

services. If you key in a wrong wallet code several times, the wallet application

is blocked for five minutes. For further information, see Wallet on page 123.

Overview of the phone functions

Your Nokia 6800 phone is approved for use on EGSM 900 and GSM 1800

networks. It provides many functions which are practical for daily use, such as the

messaging keyboard for easy and convenient writing, calendar, clock, alarm clock,

countdown timer, calculator, games and many more.

■ Messaging concept

Your phone combines the functions of a normal mobile phone and a messaging

device. When the flip is closed you can use all functions of your phone like in any

other mobile phone. By opening the flip of the phone you can use the additional

messaging keyboard, which is specially designed for writing text easily and

comfortably, see Writing and sending messages on page 69.

■ Multimedia messaging service (MMS)

The phone is able to send multimedia messages that contain text and a picture

and receive multimedia messages containing text, a polyphonic ringing tone and a

picture. You can save the pictures and ringing tones for personalising your phone,

see Multimedia messages on page 73.

■ Polyphonic sound (MIDI)

Polyphonic sound consists of several sound components that are played at the

same time. Your phone can play four instruments at the same time from over 40

sound components presaved in your phone as ringing tones and message alert

tones. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format.

You can receive polyphonic ringing tones via the multimedia service, see Reading

and replying to a multimedia message on page 76 or you can download them via

the gallery menu, see Gallery (Menu 8) on page 114, or via PC Suite, see PC Suite

on page 149.

■ General Packet Radio Service (GPRS)

GPRS technology allows mobile phones to be used for sending and receiving data

over an Internet Protocol (IP) - based network. GPRS as such is a data bearer that

enables wireless access to data networks such as the Internet. The applications

that use GPRS are WAP services, MMS and text (SMS) messaging, downloading

Java^TMapplications and the PC dial-up (for example, Internet and e-mail). Note

that your phone supports three simultaneous GPRS connections.

Before you can use GPRS technology

• Contact your network operator or service provider for availability and

subscription to the GPRS service.

• Save the GPRS settings for each of the applications used over GPRS.

See Setting up the phone for a WAP service on page 134, Message settings on

page 86 and GPRS on page 132.

Pricing for GPRS and applications

For more detailed information on pricing, contact your network operator or

service provider.

■ Loudspeaker

This feature allows you to use your phone as a loudspeaker during a call, such as a

conference call, and carry out other tasks simultaneously, while you talk. You can,

for example, write messages, check your calendar notes or play games. See

Loudspeaker on page 42.

■ MIDP Java^TMapplications

Your phone supports Java and includes some Java applications and games that

have been especially designed for mobile phones. You can also download new

applications and games to your phone, see Applications menu (Menu 10) on page

118.

■ Stereo radio

Your phone has an integrated stereo radio. You can listen to the radio using a

headset or via the loudspeaker, see Radio (Menu 7) on page 111.

■ Over the Air (OTA) settings service

In order to use WAP, MMS, GPRS and other wireless services, you need to have

proper settings on your phone. You may receive the settings directly as an OTA

message and then save them on your phone. For more information on the

availability of the settings, contact your network operator, service provider or the

nearest authorised Nokia dealer.

■ Shared memory

The following features in this phone may share memory: contacts, text and

multimedia messages, images and ringing tones in gallery, calendar, to-do notes,

Java games, applications, notes application and e-mail. Using any such features

may reduce the memory available for any features sharing memory. This is

especially true with heavy use of any of the features (although some of the

features may have a certain amount memory specially allotted to them in addition

to the amount of memory shared with other features. For example, saving many

images, Java applications etc. may take all of the shared memory and your phone

may display a message that the memory is full. In this case, delete some of the

information or entries stored in the shared memory features before continuing.

1. Your phone

■ Keys (flip closed)

1. Power key

Switches the phone on

and off.

For example, when the

keypad is locked, briefly

pressing the power key

turns the phone’s display

lights on for

approximately 15 seconds.

2. Volume key

Adjusts the volume of the

earpiece, the headset and

the loudspeaker.

3. Selection keys

and

The function of the keys

depends on the guiding

text shown on the display

above the keys, for example Menu and Contacts in standby mode.

4. 4-way joystick

Enables scrolling through names, phone numbers, menus or settings. The 4-

way joystick is also used to move the cursor up and down, and right and left

when writing text, using the calendar, and in some game applications.

dials a phone number, and answers a call. In standby mode it shows the

most recently called number.

ends an active call. Exits from any function.

enter numbers and characters.

and

8. Ear piece

are used for various purposes in different functions.

■ Connectors

1. Charger connector

2. Pop-Port^TMconnector for

headsets, data cable and other

accessories.

3. Infrared (IR) port

4. Loudspeaker

5. Microphone

■ Keys (flip open)

When you open the flip, the display graphics are rotated 90 degrees and the left

and right selection keys change positions, but the guiding texts above the left and

right selection keys do not change. For using the keys to write and edit text, see

Writing text using the messaging keyboard on page 44.

1. Keyboard light key

switches the keyboard light on or off to provide

additional lighting while using the keyboard. See also Switching the keyboard

lights on or off on page 36.

2. Profile key opens a list of profiles when pressed briefly. Pressing and holding

down the key switches the phone off.

3. Backspace

deletes characters.

4. Enter key

forces a line feed when editing text.

5. Shift keys

and

enter upper case letters and symbols. You can

either press the shift key first and then the desired key or press both keys at the

same time.

6. Space bar keys

and

enter a space.

7. Power key/ Left selection key switches the power on, when the phone’s

messaging keyboard is open and the phone is switched off. The function of the

left selection key depends on the guiding text shown on the display above the

key.

8. Character key (Chr)

opens a set of characters and symbols during editing.

■ Standby mode

When the phone is ready for use (the flip can be

either closed or open), and you have not keyed in

any characters, the phone is in standby mode.

1. Shows the name of the network in which the

phone is currently being used, or the operator logo

when no wallpaper is displayed.

2. Shows the signal strength of the cellular network

at your current location. The higher the bar, the

stronger the signal.

3.Shows the battery charge level. The higher the

bar, the more power in the battery

4.The left selection key in standby mode is Menu.

5. The right selection key in standby mode is Contacts.

See also Essential indicators in standby mode on page 24.

Screen saver

With the flip closed, the phone automatically activates a digital clock screen saver

to save power in standby mode. It will be activated after a certain length of time

when none of the phone functions have been used, see Screen saver on page 102.

Press any key or open the flip to deactivate the screen saver.

Note that if you have not set the time, 00:00 is displayed. To set the time, see

Clock on page 94.

Wallpaper

You can set your phone to display a background picture as wallpaper when the

phone is in standby mode, see Wallpaper on page 100.

Essential indicators in standby mode

You have received one or several text or picture messages. See Reading

and replying to a message on page 70.

You have received one or several multimedia messages. See Writing and

sending a multimedia message on page 74.

You have received one or several voice messages. See Voice messages on

page 85.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 36. and

Security keyguard on page 98.

The phone does not ring for an incoming call or a text message because

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tone settings on page 102.

The alarm clock is set to On. See Alarm clock on page 106.

The countdown timer is running. See Countdown timer on page 128.

The stopwatch is running in the background. See Stopwatch on page 129.

When GPRS connection is established, the indicator is shown on the top

left of the display. See GPRS connection on page 132 and Browsing the

pages of a WAP service on page 139.

The GPRS connection is suspended (on hold), for example, if there is an

incoming or outgoing call during a GPRS dial-up connection.

Infrared connection indicator. See Infrared on page 130.

All your calls are diverted to another number. If you have two phone lines,

the divert indicator for the first line is

See Call divert on page 95.

and for the second line is

or If you have two phone lines, the indicator displays the selected phone

line. See Line for outgoing calls on page 97.

The loudspeaker has been activated. See Loudspeaker on page 42.

Calls are limited to a closed user group. See Security settings on page 104.

The timed profile is selected. See Profiles (Menu 3) on page 93.

A headset, handsfree or loopset accessory is connected to the phone.

To enable the phone to show the time and date in standby mode. See Clock on

page 94 and Date on page 95.

■ Headset

Connect the HDS-3 or HDB-4 headset to the Pop-Port

connector of your phone as shown in the picture.

You can carry the headset as shown in the

picture.

2. Getting started

■ Installing the SIM card and the battery

•

Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending,

so be careful when handling, inserting or removing the card.

• Before installing the SIM card, always make sure that the phone is switched off

and then remove the battery.

1. With the back of the phone facing you,

press the back cover release button (1)

and slide the back cover off the phone.

2. To release the SIM card

holder, slide the card

holder backwards (2)

and lift it up (3).

3. Insert the SIM card

into the SIM card holder (4). Make sure that the

SIM card is properly inserted and that the golden

contact area on the card is facing downwards.

4. Close the SIM card holder (5) and slide it back to

its place (6).

5. Replace the battery (7).

6. Direct the back cover towards the locking catches on the front cover 8) and

slide the back cover until it locks into place (9).

■ Charging the battery

1. Connect the lead from the charger to the socket on the bottom of your phone.

2. Connect the charger to an AC wall socket.

The text Charging is displayed briefly if

the phone is switched on. If the battery is

completely flat, it may take a few minutes

before the charging indicator appears on

the display or before any calls can be

made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a BLC-2 battery with the ACP-12 charger takes about 1 hour and 30

minutes while the phone is in standby mode.

■ Switching the phone on and off

To switch the phone on or off, when the flip is closed, press

and hold the power key

To switch the phone off when the messaging keyboard is

open, press and hold the profile key on the top right

corner of the display.

To switch the power on, when the phone’s messaging

keyboard is open and the phone is switched off, press the

power key (left selection key)

Note that if the phone displays Insert SIM card even though the SIM card is

properly inserted, or SIM card not supported, contact your network operator or

service provider. Your phone does not support 5-Volt SIM cards and the card may

need to be changed.

• If the phone asks for a PIN code, key in the PIN code (displayed as ****), and

press OK.

See also PIN code request in Security settings on page 104 and on page 104.

• If the phone asks for a security code, key in the security code (displayed as

*****), and press OK.

See also Access codes on page 14.

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

TIPS ON EFFICIENT OPERATION: Your phone has a built-in

antenna. As with any other radio transmitting device, do not

touch the antenna unnecessarily when the phone is switched

on. Contact with the antenna affects call quality and may

cause the phone to operate at a higher power level than

otherwise needed. Not touching the antenna area during a

phone call optimises the antenna performance and the

talktime of your phone.

■ Opening the flip

1. Hold the phone with

both hands and open

the flip as shown in

picture (1).

2. Turn the flip until you hear it click into place (2).

Make sure that the golden contacts of the flip and

the phone touch each other.

3. Turn the phone to a horizontal position and hold it

as shown in picture (3). The loudspeaker function automatically activates

when the flip is open.

Switching the keyboard lights on or off

• The keyboard lights are not lit automatically, when you open the flip. To turn

on the lights, press the light key

on the top left corner of the keyboard. The

keyboard lights are switched off after a certain time, but they are turned on

again as soon as you press any key.

• To switch the keyboard lights off, press the keyboard light key or close the flip.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed, for

example, when your phone is in your handbag. You can lock the keypad only when

the flip is closed.

• Locking the keypad

In standby mode, press Menu and then

within 1.5 seconds.

• Unlocking the keypad

Press Unlock and then

within 1.5

seconds or open the flip. Note that the

keyguard will not be activated, if you close the

flip.

To answer a call when the keyguard is on, press

. During a call, the phone can be operated

normally. When you end or reject the call, the

keypad will be locked automatically.

For locking the keypad during a call, see Options during a call on page 42 and for

setting the security keyguard, see Security keyguard on page 98.

Note: When Keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number). Key

in the emergency number and press

have keyed in its last digit.

. The number is displayed only after you

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. If you key in an incorrect

character, press Clear to delete it. With the flip open in standby mode, pressing

any number key starts a call procedure.

For international calls, press

twice for the international prefix or + if

the flip is open, (the + character replaces the international access code) and

then key in the country code, the area code without the leading 0, if necessary,

and finally the phone number.

2. Press

3. Press

to call the number.

to end the call or to cancel the call attempt.

See also Options during a call on page 42.

Making a call using contacts

• See Searching for a name in contacts on page 53. Press

to call the number

on the display.

Last number redialling

• In standby mode, press

called or attempted to call. Scroll to the number or name that you want, and

press to call the number.

once to access the list of the last 20 numbers you

Calling your voice mailbox

• In standby mode when the flip is closed, press and hold

, or press

and

When the flip is open, press and hold the corresponding number key on

the keyboard.

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 85.

Speed dialling a phone number

Before you can use speed dialling, do as follows:

1. Press Menu, select Settings, Call settings and Speed dialling. Set the setting to

On. See also Speed dialling on page 96.

2. Assign a phone number to one of the speed dialling keys from

see Speed dialling on page 56.

3. Call the number in either of the followin g ways:

• Press the speed dialling key you want and then press

. You can also activate

speed dialling by pressing the corresponding number key, when the flip is open.

• If Speed dialling is set to on, press and hold a speed dialling key until the call is

started.

Making a conference call

Conference calling is a network service that allows up to six people to take part in

a conference call.

1. Make a call to the first participant.

2. To make a call to a new participant, press Options and select New call.

3. Key in the phone number of the new participant, or retrieve it from the

memory, and press Call. The first call is put on hold.

4. When the new call has been answered, join the first participant in the

conference call. Press Options and select Conference.

5. To add a new participant to the call, repeat steps 2 to 4.

6. To have a private conversation with one of the participants:

Press Options and select Private and select the desired participant. Rejoin the

conference call as described in step 4.

7. To end the conference call, press

■ Answering or rejecting an incoming call

Press

to answer an incoming call and press

to end the call.

Press

to reject an incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

If the HDB-4 or HDS-3 headset is connected to the phone, you can answer and

end a call by pressing the headset key.

Tip: If the Divert if busy function is activated to divert the calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call divert on page 95.

Note that when somebody is calling you, the phone shows the caller’s name,

phone number, or the text Private number or Call. If more than one name is found

in contacts with the same phone number as the caller’s number, only the caller’s

number will be displayed, if this is available.

Call waiting

During a call, press

to answer the waiting call. The first call is put on hold.

Press to end the active call.

To activate the Call waiting function, see Call waiting on page 97.

■ Options during a call

Many of the options that you can use during a call, are network services. Press

Options during a call for some of the following options:

Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or Unhold, New

call, Conference, Private, Answer, Reject and Loudspeaker or Handset.

Lock keypad to activate the keypad lock.

Send DTMF to send DTMF tone strings, for example passwords or bank account

numbers. Key in the DTMF string or search for it in contacts and press OK. Note

that you can key in the wait character w and the pause character p by repeatedly

pressing

Swap to switch between the active call and the call on hold, Transfer to connect a

call on hold to an active call, and to disconnect yourself from the calls.

Loudspeaker

You can use your phone as a loudspeaker during a call. Do not hold the phone to

your ear during loudspeaker operation.

To activate the loudspeaker:

• Open the flip. Or:

• When the flip is closed, press Options and select Loudspeaker or press Loudsp.,

if available.

To deactivate the loudspeaker during a call:

• Close the flip or press Handset, when the flip is open. Or:

• When the flip is closed, press Options and select Handset or press Handset, if

available.

If you have connected the CARK126 handsfree unit or the headset to the

phone, Handset in the options list is replaced with Handsfree or Headset and

the selection key Handset with Handsfr. or Headset respectively.

The loudspeaker is deactivated automatically when you end the call or call

attempt, connect the handsfree unit or headset to the phone, or close the flip.

Using the loudspeaker with the stereo radio, see Radio (Menu 7) on page 111.

4. Writing text

Your phone is especially designed for easy and comfortable text writing. The

easiest way is to write with your thumbs using the messaging keyboard. You can,

for example, start writing a message using the keyboard, close the flip and

continue writing the same text using either traditional or predictive text input.

Note that the predictive text input is not available, when the flip is open.

■ Writing text using the messaging keyboard

You can write a text message in two ways, when the flip is open. Press Menu and

select Messages, Text messages and Create message, see Writing and sending

messages on page 69.

Tip: To quickly start writing a message, move the joystick to the left in

standby mode.

Or: Press any of the letter keys in standby mode to open the Notes application, see

Notes (Menu 6) on page 110.

The following functions are available when writing text, when the flip is open:

• To insert a number, press any of the number keys. Pressing a number key in

standby mode initiates a normal call procedure.

• To switch between the lower and upper case, indicated by

on the top left of the display, or to key in symbols, press one of the shift keys

. You can either press the shift key and the desired character

consecutively, or press and hold both the shift key and the desired letter key at

the same time. To write in upper case only, press

twice.

• To delete characters from the display, press

or Clear. Pressing backspace

briefly clears one character at a time, while longer keypress deletes characters

more quickly.

• To add a space, press one of the space keys (

) at the

bottom of the keyboard.

• To force a line feed, press

Typing accented characters

The characters available depend on the language selected in the Language menu,

see Language on page 98. To type accented characters or symbols that are not

printed on the keyboard, do one of the following:

• To access a set of punctuation marks, accented characters and symbols, press

the character key

. Scroll through the character set by moving the joystick

and press Use to select a character.

• To type an accented character that is not included in the list of special

characters under

, such as á, press and hold

and simultaneously press ’a’

repeatedly until the desired accented variant of ’a’ appears on the display.

■ Writing text when the flip is closed

You can use predictive or traditional text input when the phone’s flip is closed

.When you are writing text, predictive text input is indicated by

and

on the top left of the display. You can change the

or by pressing . The number

traditional text input by

character case, indicated by

mode is indicated by

, and you can switch between the letter and number

modes by pressing and holding

Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set the predictive text input on, select a language in the dictionary options

list. Predictive text input is only available for the languages on the list.

• To revert to traditional text input, select Dictionary off.

Tip: To quickly set the predictive text input on or off when writing text,

press

twice, or press and hold Options.

Using predictive text input

You can key in any letter with a single keypress. Predictive text input is based on a

built-in dictionary to which you can also add new words.

1. Start writing a word using the keys

. Press each key only once

for one letter. The word may change after each keystroke.

Example: To write Nokia when the English dictionary is selected, press

once for N, once for o, once for k, once for

once for a.

i and

To insert a number while in letter mode, press and hold the desired number key.

For more instructions for writing text, see Tips for writing text on page 48.

2. When you have finished writing the word and it is correct, confirm it by adding

a space with

or by moving the joystick to the right.

If the word is not the one you are looking for, press

repeatedly or press

Options and select Matches. When the word you want appears, confirm it.

3. If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

4. Start writing the next word.

Writing compound words

Key in the first part of the word and confirm it by moving the joystick to the right.

Write the last part of the word and confirm it by moving the joystick to the right.

Using traditional text input

Press a number key,

, repeatedly until the desired character

appears. Not all characters available under a number key are printed on the key.

The characters available depend on the language selected in the Language menu,

see Language on page 98.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or move the joystick to the right, and then key in the

letter.

•

The most common punctuation marks and special characters are available

under the number key

More instructions for writing text, see Tips for writing text on page 48.

Tips for writing text

The following functions may also be available for writing text in predictive or

traditional input:

• To insert a space, press

• To move the cursor to the right, left, up or down, move the joystick

respectively.

• To delete a character from the display, press Clear. Press and hold Clear to

delete the characters more quickly.

To delete all the characters simultaneously when writing a message, press

Options and select Clear text.

• To insert a word that is not in the dictionary when using tpredictive text input,

press Options and select Insert word. Write the word using traditional text

input and press Save. The word is also added to the dictionary.

• To insert a special character when using traditional text input, press

when using predictive text input, press and hold

, or press Options and

select Insert symbol.

Move the cursor with the joystick to a character and press Use to select it.

You can also scroll to a character by pressing

and select it by pressing

The following options are available when writing text messages:

• To insert a phone number while in the letter mode, press Options and select

Insert number. Key in the number or search for it in contacts and press OK.

• To insert a name from contacts, press Options and select Insert contact. To

insert a phone number or a text item attached to the name, press Options and

select View details.

5. Contacts

You can save names and phone numbers (contacts) in both the phone’s memory

and in the SIM card’s memory.

• You may save up to 500 names with numbers, addresses and text for each

name in the phone’s memory. The number of names that can be saved depends

on both the length of the names, and the number and length of the phone

numbers and text items.

Contacts use shared memory, see Shared memory on page 19.

• The phone supports SIM cards that can save up to 250 names and phone

numbers. Names and numbers that are saved in the SIM card’s memory, are

indicated by

■ Selecting settings for contacts

1. Press Contacts and select Settings. Select

2. Memory in use to select the memory, either SIM card or phone, that you want

to use for your contacts. To recall names and numbers from both memories for

contacts , select Phone and SIM. In this case, the names and numbers will be

saved in the phone’s memory.

3. Contacts view to select how the names (and numbers) in contacts are

displayed.

4. Memory status to see how many names and phone numbers are currently

saved and how many can still be saved in the selected memory for contacts.

■ Saving names and phone numbers (Add contact)

Names and numbers will be saved in the memory in use, see Selecting settings for

contacts above.

1. Press Contacts and select Add contact.

2. Key in the name and press OK. See Using traditional text input on page 47.

3. Key in the phone number, and press OK. To key in numbers, see Making a call

on page 38.

4. When the name and number have been saved, press Done.

Tip: Quick save: In standby mode, key in the phone number. Press

Options and select Save. Key in the name, press OK and Done.

Saving multiple numbers and text items per name

You can save different types of phone numbers and short text items for each name

in the phone’s internal memory for contacts.

The first number saved is automatically set as the default number and it is

indicated by a frame around the number type indicator, for example

. When

you select a name from contacts, for example to make a call, the default number is

used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM. See

Selecting settings for contacts on page 50.

2. To access the list of names and phone numbers, move the joystick up or down

in standby mode.

3. Scroll to the name saved in the phone’s internal contacts to which you want to

add a new number or text item, and press Details.

4. Press Options and select Add number or Add detail.

5. Select one of the following number types:

General

Mobile,

Home,

Office and

Fax.

or text types

E-mail address,

Web address,

Postal address and

Note.

To change the number or text type, select Change type in the options list.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Changing the default number

Move the joystick up or down in standby mode, scroll to the name that you want

and press Details. Scroll to the number that you want to set as the default

number. Press Options and select Set as default.

■ Searching for a name in contacts

1. Press Contacts and select Search.

2. You can key in the first characters of the name you are searching for in the

pop-up window.

Move the joystick up or down to scroll through the names in the list, and right

or left to move the cursor in the pop-up window

3. Scroll to the name you want, and press Details. Scroll to view the details of the

selected name.

Tip: To quickly find a name and phone number, move the joystick up or

down in standby mode. Key in the first letter(s) of the name, and/or scroll

to the name you want.

Tip: To quickly view a specific name with the default number, when the

flip is closed, press and hold

at the name while scrolling through

names.

■ Editing a name, number or text item

Search for the name (and number) that you want to edit and press Details. Scroll

to the name, number or text item you want to edit, and press Options. Select Edit

name, Edit number, or Edit detail, and edit the name, number, or text and press

OK.

■ Erasing names and numbers

Press Contacts and select Delete.

• To delete names and numbers one by one, select One by one and scroll to the

name (and number) that you want to delete. Press Delete and press OK to

confirm.

• To delete names and numbers in contacts simultaneously, select Delete all and

then scroll to contacts, Phone or SIM card and press Delete. Press OK and

confirm with the security code.

■ Copying contacts

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa.

1. Press Contacts and select Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default numbers.

• If you select One by one, scroll to the name that you want to copy and press

Copy.

Default numbers is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied.

4. To choose whether you want to keep or delete the original names and numbers,

select Keep original or Move original.

• If you select All or Default numbers, press OK when Start copying? or Start

moving? is displayed.

■ Sending and receiving a business card

You can send and receive a person’s contact information as a business card either

via IR or as an Over The Air (OTA) message if supported by the network.

Receiving a business card

To receive a business card via IR, make sure that your phone is ready to receive

data through its IR port, see Infrared on page 130. The user of the other

compatible phone can now send the name and phone number via Infrared.

When you have received a business card via IR or as an OTA message, press Show.

Press Save to save the business card in the phone’s memory. To discard the

business card, press Exit and then OK.

Sending a business card

You can send a business card via IR or as an OTA message to a compatible phone

or other handheld device which supports the vCard standard.

• To send a business card, search contacts for the name and phone number you

want to send, press Details and Options and select Send bus. card.

• To send the business card via IR, make sure that the other phone or the PC is

set up to receive data via its IR port and select Via infrared.

• To send the business card as an OTA message, select Via text message.

■ Speed dialling

To assign a number to a speed dialling key, press Contacts, select Speed dials and

scroll to the desired speed dialling key number.

Press Assign, press Search, and select first the name and then the number you

want to assign. If the Speed dialling function is off, the phone asks whether you

want to activate it. Press Yes to activate it, see Speed dialling on page 96.

To make a call using the speed dialling keys, see Speed dialling a phone number on

page 39.

■ Info numbers

You can call the information numbers of your service provider. The numbers may

be included in your SIM card.

Press Contacts and select Info numbers. Scroll through a category to an

information number and press

to call the number.

■ Service numbers

You can call the service numbers of your service provider. The numbers may be

included in your SIM card.

Press Contacts and select Service numbers. Scroll to a service number and press

to call the number.

■ My numbers

The phone numbers assigned to your SIM card are saved in My numbers if this is

allowed by the card. To view the numbers press Contacts and select My numbers.

Scroll to the desired name or number, and press View.

■ Caller groups

You can arrange the names and phone numbers saved in contacts into caller

groups. For each caller group, you can set the phone to sound a specific ringing

tone and show a selected graphic on the display when you receive a call from a

phone number in the group, see below. To set the phone to ring only upon calls

from phone numbers belonging to a selected caller group, see Alert for in Tone

settings on page 102.

Press Contacts, select Caller groups and select the desired caller group. Select

•

Group name, key in a new name for the caller group and press OK.

Group ringing tone and select the ringing tone for the group. Default is the

ringing tone selected for the currently active profile.

•

Group logo and select On to set the phone to display the group logo, Off not to

display it or View to view the logo.

Group members to add a name to the caller group, press Options and select

Add contact. Scroll to the name that you want to add to the group and press

Add.

To remove a name from a caller group, scroll to the desired name, press

Options and select Remove contact.

6. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To view

the help text, scroll to the menu function you want and wait for 15 seconds. To

exit the help text, press Back. See Help text activation on page 100.

■ Accessing a menu function

By scrolling

1. To access the menu, press Menu.

2. Scroll through the menu by moving the joystick up or down and select, for

example, Settings by pressing Select.

3. If the menu contains submenus, select the one you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

By using a shortcut

The menus, submenus and setting options are numbered and you can access most

of them by using their shortcut number.

• To access the menu, press Menu. Key in quickly, within two seconds, the index

number of the menu function you want to access.

Example: To set the Anykey answer to On, press Menu,

and . Press Back to return to the previous menu level,

and Exit to exit the menu.

Note that accessing the menu functions in menu 1, press Menu,

and the rest of the digits of the shortcut number.

■ List of menu functions

1. Messages

1. Text messages

1. Create message

2. Inbox

3. Sent items

4. Archive

5. Templates

6. My folders

7. Distribution lists

8. Delete messages

2. Multimedia msgs.

1. Create message

2. Inbox

3. Outbox

4. Sent items

5. Saved items

6. Delete messages

3. E-mail

1. Open

1. Create e-mail

2. Retrieve

3. Send now

4. Send and retrieve

5. Inbox

6. Outbox

7. Deleted items

8. Sent items

9. Drafts

10.Archive

11.Settings

2. Web access

3. Service settings

4. Details

4. Chat

5. Voice messages

1. Listen to voice messages

2. Voice mailbox number

6. Info messages

1. Info service

2. Topics

3. Language

4. Info topics saved on SIM card

5. Read¹

7. Message settings

1. Text messages

2. Multimedia msgs.

3. Other settings

8. Service commands

2. Call register

1. Missed calls

1. This menu is shown only if any info messages are received.

2. Received calls

3. Dialled numbers

4. Delete recent call lists

1. All

2. Missed

3. Received

4. Dialled

5. Call duration

1. Last call duration

2. Received calls’ duration

3. Dialled calls’ duration

4. All calls’ duration

5. Clear timers

6. Call costs

1. Last call units

2. All calls’ units

3. Call cost settings

7. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

8. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

3. Profiles

1. General

1. Activate

2. Personalise

3. Timed

2. Silent (same submenus as in General)

3. Meeting (same submenus as in General)

4. Outdoor (same submenus as in General)

5. Pager (same submenus as in General)

4. Settings

1. Time and date settings

1. Clock

2. Date

3. Auto-update of date & time

2. Call settings

1. Call divert

2. Anykey answer

3. Automatic redial

4. Speed dialling

5. Call waiting

6. Summary after call

7. Send my caller identity

8. Line for outgoing calls¹

3. Phone settings

1. For availability, contact your network operator or service provider.

1. Language

2. Memory status

3. Security keyguard

4. Cell info display

5. Welcome note

6. Network selection

7. Confirm SIM service actions

8. Help text activation

9. Start-up tone

4. Display settings

1. Wallpaper

2. Colour schemes

3. Operator logo

4. Screen saver timeout

5. Display brightness

5. Tone settings

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

8. Alert for

6. Accessory settings¹

1. This menu is shown only if the phone is or has been connected to a headset, handsfree unit

or loopset available for the phone.

7. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Access codes

8. Restore factory settings

5. Organiser

1. Alarm clock

2. Calendar

3. To-do list

6. Notes

7. Radio

8. Gallery

1. View folders

1. Graphics

2. Tones

2. Add folder

3. Delete folder

4. Rename folder

5. Gallery downloads

1. Image downloads

2. Tone downloads

9. Games

1. Select game

2. Game downloads

3. Memory

4. Settings

1. Game sounds

2. Game lights

3. Shakes

10.Applications

1. Select application

2. App. downloads

3. Memory

11.Extras

1. Calculator

2. Wallet

1. Cards

2. Personal notes

3. Settings

3. Synchronisation

1. Synchronise

2. Settings

4. Countdown timer

5. Stopwatch

12.Connectivity

1. Infrared

2. GPRS

1. GPRS connection

2. GPRS modem settings

13.Services

1. Home

2. Bookmarks

3. Service inbox

4. Settings

1. Connection settings

2. Appearance settings

3. Security settings

4. Service inbox settings

5. Go to address

6. Clear the cache

14.SIM services¹

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card

7. Menu functions

■ Messages (Menu 1)

Note: When sending messages via the SMS network service,

your phone may display the words "Message sent". This is an indication that the

message has been sent by your phone to the message centre number programmed

into your phone. This is not an indication that the message has been received at the

intended destination. For more details about SMS services, check with your service

provider.

You can read, write, send and save text, multimedia, and e-mail messages. All

messages are organised in folders.

Before you can send any text or picture messages, you need to save your message

centre number, see Message settings on page 86.

Text messages (SMS service)

Your phone can send and receive multi-part messages which consist of several

ordinary text messages (network service). Invoicing is based on the number of

ordinary messages that are required for a multi-part message.

You can also send and receive traditional picture messages that contain text and a

picture. Each picture message is made up of several text messages. Therefore,

sending one picture message may cost more than sending one text message.

Note: Picture message function can be used only if it is supported by your network

operator or service provider. Only phones that offer picture message features can

receive and display picture messages.

Writing and sending messages

The number of available characters and the current part number of a multi-part

message are shown on the top right of the display.

1. Press Menu and select Messages, Text messages and Create message.

Tip: To quickly start writing a message, move the joystick to the left

in standby mode.

2. Key in a message, see Writing text on page 44. To insert text templates or a

picture into the message, see Templates on page 71.

3. To send the message, press Options, and select Send

4. Enter the recipient’s phone number or search for it in contacts.

Press OK to send the message.

Options for sending a message

After you have written a message, press Options and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done.

• To send a message using a distribution list, select Send to list. For creating a

distribution list, see Distribution lists on page 73.

• To send a message using a message profile, select Sending profile and then the

desired message profile. For defining a message profile, see Message settings

on page 86.

Reading and replying to a message

When you have received a message, the indicator

and the number of new

messages followed by message(s) received are shown.

The blinking

indicates that the message memory is full. Before you can

receive new messages, delete some of your old messages.

The text messages function uses shared memory, see Shared memory on page 19.

1. Press Show to view the new message, or press Exit to view it later.

Reading the message later: Press Menu, select Messages, Text messages and

Inbox.

2. If more than one message has been received, select the one that you want to

read. An unread text message is indicated by

in front of it.

3. While reading or viewing the message, press Options.

You can select an option, for example, to delete, forward or edit the message

as a text message, move and rename the message you are reading.

Select Copy to calendar to copy text from the beginning of the message to your

phone’s calendar as a memo for the current day.

Select Message details to view the sender’s name and phone number, the

message centre used, and the date and time of receipt.

Select Use detail to extract numbers, e-mail and website addresses from the

current message.

When viewing a picture message, select Save picture to save the picture in the

Templates folder.

4. Select Reply to reply to a message. Select Original text to include the original

message in the reply, or select a standard answer to be included in the reply, or

select Empty screen.

5. Press Options, select Send, and press OK to send the message to the displayed

number.

Inbox and sent items folders

The phone saves incoming text messages in the Inbox folder and sent messages in

the Sent items folder of the Text messages submenu.

Text messages that you wish to send later can be saved in the Archive, My folders

or Templates folder.

Templates

Your phone includes text templates, indicated by

, and picture templates,

indicated by

To access the template list, press Menu and select Messages, Text messages and

Templates.

Inserting a text template into a message

• When you are writing or replying to a message, press Options. Select Use

template and select the template that you want to insert.

Inserting a picture into a text message

• When you are writing or replying to a message, press Options. Select Insert

picture and select a picture to view it. Press Insert to insert the picture into

your message. The

indicator in the header of the message indicates that a

picture has been attached. The number of characters that you can include in a

message depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Archive folder and my folders

To organise your messages, you can move some of them to the Archive folder, or

add new folders for your messages.

While reading a message, press Options. Select Move, scroll to the folder to which

you want to move the message and press Select.

To add or delete a folder, press Menu, select Messages, Text messages and My

folders.

• To add a folder, press Options and select Add folder.

• To delete a folder, scroll to the folder that you want to delete, press Options

and select Delete folder.

Distribution lists

You can save distibution lists in the phone’s memory, containing a fixed number of

people to whom you regularly send messages. If the message fails to send, an

Undelivered folder will appear containing a list of the recipient(s) who did not

receive the message.

1. Press Menu, select Messages, Text messages and Distribution lists.

2. Press Add to create a new list. The option is shown, if you have not saved any

lists in the folder. Or: Press Options and select Add list.

3. Key in the name for the list and press OK.

4. To add a name to the newly created list, press Options and select View list.

5. Press Options and select Add contact. Search for the name in contacts, select it

and press OK.

The other options in the Options list include View list, Rename list, Clear list and

Delete list.

In the Undelivered folder you can, for example, select View message to view the

message that failed to send or Resend to list to send the message again.

Multimedia messages

Note: This function can be used only if it is supported by your network operator

or service provider. Only phones that offer compatible multimedia message

features can receive and display multimedia messages.

You can send multimedia messages containing text and a picture and receive

multimedia messages containing text, a polyphonic ringing tone and a picture.

The phone supports multimedia messages that are up to 45 kB in size. If the

maximum size is exceeded, the phone may not be able to receive the message.

Depending on the network, you may receive a text message that includes an

Internet address where you can view the multimedia message.

If the message contains a picture that is larger than the display area, the phone

scales it down to fit the display area.

Note: If Allow multimedia reception is set toYes or In home network, your

operator or service provider may charge you for every message you receive.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, PNG and BMP.

• Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing tones

If a received message contains any unsupported elements, they may be replaced

with the file name and the text Object format not supported

Note that you cannot receive any multimedia messages if you have a call in

progress, a game or another Java application running, or an active WAP

connection over GSM data (see Keying in the service settings manually on page

135). Because delivery of multimedia messages can fail for a variety of reasons, do

not rely solely upon them for essential communications.

Writing and sending a multimedia message

To set the settings for multimedia messaging, see Settings for multimedia

messages on page 88. For availability and subscription to the multimedia

messaging service, contact your network operator or service provider.

1. Press Menu and select Messages, Multimedia msgs. and Create message.

2. Key in a message, see Writing text on page 44.

You can insert one picture in a multimedia message. To insert a picture, press

Options and select Insert image. The list of available folders in the Gallery is

shown. Open the desired folder, scroll to the desired picture, press Options and

select Insert. The

indicator on the header of the message indicates that a

picture has been attached.

To insert a name from contacts, press Options, select More options and Insert

contact. Scroll to the desired name, press Options and select Insert contact.

To insert a number, press Options , select More options and Insert number. Key

in the number or search for it in contacts and press OK.

3. To view the message before sending it, press Options and select Preview.

4. To send the message, press Options and select Send to number (or Send to e-

mail).

5. Enter the recipient’s phone number (or e-mail address) or search for the phone

number (or e-mail address) in contacts. Press OK and the message is moved to

the Outbox folder for sending.

It takes more time to send a multimedia message than a text message. While

the multimedia message is being sent, the animated indicator

is displayed

and you can use other functions of the phone. If there is an interruption, while

the message is being sent, the phone tries to resend it a few times. If this fails,

the message will remain in the Outbox folder and you can try to resend it later.

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes, see Settings for multimedia messages

on page 88.

Reading and replying to a multimedia message

When your phone is receiving a multimedia message, the animated indicator

is displayed. When the message has been received, the indicator

and the text

Multimedia message received are shown.

The blinking

indicates that the memory for multimedia messages is full, see

Multimedia messages memory full on page 77.

The multimedia message function uses shared memory, see Shared memory on

page 19

1. Press Show to view the message, or press Exit to view it later.

Reading the message later: Press Menu and select Messages, Multimedia

msgs. and Inbox.

2. Scroll to view the message. Press Options and some of the following options

may be available.

•

Delete message to delete a saved message.

Reply to reply to the message. To send the reply, press Options and select

Send. The sender’s phone number (or e-mail address) is used as the default

value.

•

Forward to no. to forward the message to a phone number.

•

Edit to edit a message. You can only edit messages you have written. See

Writing and sending a multimedia message on page 74.

•

Message details to view the subject, size and class of the message.

Details to view the details of the attached image or sound

Play to listen to the ringing tone that is contained in the message.

Save sound clip to save a ringing tone in the Gallery.

Save image to save the picture in the Gallery.

Inbox, Outbox, Saved and Sent items folders

The phone saves the multimedia messages that have been received in the Inbox

folder of the Multimedia msgs. submenu.

Multimedia messages that have not yet been sent are moved to the Outbox folder

of the Multimedia msgs..

The multimedia messages that you wish to send later can be saved in the Saved

items folder of the Multimedia msgs. submenu.

The multimedia messages that have been sent are saved in the Sent items folder of

the Multimedia msgs. submenu, if the setting Save sent messages is set to Yes, see

Settings for multimedia messages on page 88.

Multimedia messages memory full

When you have a new multimedia message waiting and the memory for the

messages is full, the indicator

blinks and Multimedia memory full, view

waiting msg. is shown. To view the waiting message, press Show. To save the

message, press Options, select Save message and delete old messages by first

selecting the folder and then the message to be deleted.

To discard the waiting message, press Exit and Yes. If you press No, you can view

the message.

Deleting messages

• To delete text messages, press Menu and select Messages, Text messages and

Delete messages.

To delete all text messages from all text message folders, select All messages

and when Delete all messages from all folders? is displayed, press OK. If the

folders contain unread messages, the phone will ask whether you want to

delete them also.

To delete multimedia messages, press Menu and select Messages, Multimedia

msgs. and Delete messages.

• To delete all messages from a folder, select the folder where you want to delete

the messages and press OK to confirm. If the folder contains unread messages,

the phone will ask whether you want to delete them also.

E-mail messages

Writing and sending an e-mail

Note: When sending e mails, your phone may display the words Message sent.

This is an indication that the e-mail has been sent by your phone to the e-mail

server. This is not an indication that the e-mail has been received at the intended

destination. For more details about e-mail services, check with your service

provider.

Before you can send and retrieve any e-mails, you need to do the following:

• You need an active e-mail account and e-mail service settings. For the

availability of your e-mail account and e-mail service settings, contact your e-

mail service provider.

• Activate the e-mail service settings that you have obtained from your network

operator or e-mail service provider, see Options available for an e-mail

application on page 84.

• You also need to set the e-mail settings on your phone, see E-mail settings on

page 82.

You can write your e-mail message before connecting to the e-mail service, or

connect to the service first, and then write and send your e-mail.

1. Press Menu and select Messages, E-mail, Open and Create e-mail.

2. Key in the recipient’s e-mail address, press Options and select Save. Or:

Press Options and select Search to search for the e-mail address in contacts

and select Save.

3. You can key in the subject for the e-mail if you want, then press Options and

select Save.

4. Key in the e-mail message, see Writing text on page 44. The number of

characters that you can key in is shown on the top right of the display.

5. To send the e-mail message, press Options and select Send e-mail. Select

•

Send now to send the e-mail immediately. If you have not already

connected to the e-mail account, your phone establishes the connection

first and then sends the e-mail.

•

Send later to send your e-mail later and the e-mail is saved in the Outbox

folder. If you want to edit or continue writing your e-mail later, you can

save it in Drafts by selecting Save draft msg..

Sending the e-mail later: Press Menu and select Messages, E-mail, Open,

Outbox and Send now.

Downloading e-mail messages from your e-mail account

The e-mail function uses shared memory, see Shared memory on page 19.

1. Press Menu and select Messages, E-mail, Open and Retrieve to download e-

mail messages that have been sent to your e-mail account. Or:

Press Menu and select Messages, E-mail, Open and Send and retrieve to

download new e-mail messages and to send e-mails that have been saved in

the Outbox folder.

If the message memory is full, delete some or your older messages before you

start to download new messages.

2. Your phone makes a connection to the e-mail service. A status bar is shown,

while your phone is downloading e-mail messages to your phone.

3. Press Select to view the new message in Inbox, or press Back to view it later.

Reading the e-mail later: Press Menu and select Messages, E-mail, Open and

Inbox.

4. If more than one message is received, select the message that you want to

read. An unread text message is indicated by

Replying to an e-mail message

1. While reading or viewing the message, press Options.

You can, for example, delete, reply, reply to all, forward or archive the message

you are reading.

2. Select Reply to reply to an e-mail. Select Original text to include the original

message in the reply or select Empty screen.

When replying to an e-mail, first confirm or edit the e-mail address and

subject, then write your reply.

3. Press Options and select Send e-mail and Send now to send the message to the

displayed number.

Inbox, Outbox, Deleted items, Sent items, Drafts and Archive folders

Your phone has the following folders in the E-mail menu:

•

Inbox for saving e-mails that you have downloaded from your e-mail account.

Outbox for saving e-mails that have not been sent, if you have selected Send

later, see Writing and sending an e-mail on page 79.

•

Deleted items for e-mails that have been deleted.

Sent items for saving e-mails that have been sent.

Drafts for saving unfinished e-mails.

Archive for organising and saving your e-mails.

E-mail settings

1. Press Menu and select Messages, E-mail, Open and Settings.

2. Select Mailbox in use to view a list of mailboxes, then scroll to the one that you

want to edit and select it.

You have five mailboxes that you can use for the e-mail settings of your phone

for saving and retrieving e-mail messages.

3. Select Edit active mailbox and select each of the settings one by one. Key in all

the required settings according to the information you have received from your

e-mail service provider.

•

Mailbox name. Key in the name that you want to use for the mailbox.

E-mail address. Key in your e-mail address.

My e-mail name. Key in your name or nickname, if you want the recipient to

see it.

•

Outgoing (SMTP) server. Key in the mail server address.

Outgoing (SMTP) port. Key in the number of the mail server port for

outgoing e-mail. The most common default value is 25.

•

Use SMTP authorisation. If your e-mail service provider requires

authentication for sending e-mails, set the setting to on. You must also

define your SMTP user name and SMTP password.

•

SMTP user name. Key in the name that you have obtained from your e-

mail service provider to access your mailbox.

•

SMTP password. Key in the password that you want to use to access your

mailbox. If you have not defined a password, you may be asked to define

one when your phone connects to your e-mail account.

•

Include signature. Confirm your selection if you want to add a predefined

signature to your e-mail.

Incoming (POP3/IMAP) server. Key in the e-mail server type for the

incoming e-mail (either POP3 or IMAP4)

Incoming (POP3/IMAP) port. Key in the port number that you have obtained

from your e-mail service provider.

POP3/IMAP user name Key in the user name. If you have not defined your

SMTP user name, the e-mail server uses this user name instead.

POP3/IMAP password. Key in the password. If you have not defined your

SMTP password, the e-mail server uses POP3/IMAP password instead.

Reply-to address. Key in the e-mail address to which you want the replies

to be sent, if it differs from your e-mail address.

Incoming server type. Select either POP3 or IMAP4.

•

Secure login APOP. Select On if your connection requires a secure login,

otherwise leave it to Off. Contact your service provider if in doubt. This

option is shown only, if you have selected POP3 as your mailbox type.

Retrieve mails. Select All if you want to retrieve all your e-mails at once

or select User defined if you want to retrieve only some of them at a

time.

Options available for an e-mail application

•

Web access to restrict the application for accessing the network. Select Ask

first and the phone will ask you to confirm net access, Allowed to allow the net

access, or Not allowed not to allow the net access.

•

Service settings to activate the network connection settings for your e-mail

function. Select Application to activate the settings that are used for the e-

mail function or select Default to confirm that your e-mail function uses the

same settings as the WAP browser, see Keying in the service settings manually

on page 135. Contact your e-mail service provider, if in doubt.

•

Details to give additional information about the application.

Chat

You can have a conversation with another person using this faster text messaging

application. You cannot save received or sent messages, but you can view them

while chatting. Each chat message is priced as a text message.

1. To start a chat, press Menu, select Messages and Chat. Key in or search in

contacts for the phone number of the person with whom you want to chat and

press OK.

Another way to start a chat: When you have received a message, press Show

to read it. To start a chat, press Options and select Chat.

2. Key in your nickname for the chat and press OK.

3. Write your chat message, see Writing text on page 44.

4. To send the message, press Options and select Send.

5. The reply message from the other person is shown above your original

message.

To reply to the message, press OK and repeat steps 3 and 4.

6. To end the chat session, press Options and select Quit.

To view the most recent messages of the current chat session, press Options and

select Chat history. The messages that you sent are indicated by "<" and your

nickname, and the messages that you received are indicated by ">" and the

sender’s nickname. Press Back to return to the message you are currently writing.

To edit your nickname, select the option Chat name.

Voice messages

Voice mailbox is a network service and you may need to subscribe to it. For more

information and for the voice mailbox number, contact your service provider.

Press Menu and select Messages and Voice messages. Select

•

Listen to voice messages to call your voice mailbox at the phone number that

you have saved in the Voice mailbox number menu.

Each phone line may have its own voice mailbox number, see Line for outgoing

calls on page 97.

Voice mailbox number to key in, search for or edit your voice mailbox number

and press OK to save it.

If supported by the network, the indicator

will show new voice messages.

Press Listen to call your voice mailbox number.

Tip; Pressing and holding

calls your voice mailbox, when the flip is

closed. When the flip is open, press and hold the corresponding number

key.

Info messages

With the info message network service you can receive messages on various

topics from your service provider, for example weather or traffic conditions. For

available topics and the relevant topic numbers, contact your service provider.

If the GPRS connection is set to Always online, the info messages may not be

received. In that case, set the GPRS connection to When needed, see GPRS

connection on page 132.

Message settings

The message settings affect the sending, receiving and viewing of messages.

Settings for text messages

1. Press Menu and select Messages, Message settings,Text messages andSending

profile.

2. If more than one message profile set is supported by your SIM card, select the

set you want to change.

• Select Message centre number to save the phone number of the message

centre that is required for sending text messages. You will receive this number

from your service provider.

• Select Messages sent as to select the message type: Text, E-mail, Paging or Fax.

• Select Message validity to select the length of time for which the network

should attempt to deliver your message.

• For message type Text, select Default recipient number to save a default

number for sending messages for this message profile.

For message type E-mail, select E-mail server to save the e-mail server number.

• Select Delivery reports to ask the network to send delivery reports about your

messages (network service).

• Select Use GPRS to set GPRS as the preferred SMS bearer. When the setting is

set to on and the GPRS connection setting is Always online, the phone sends a

text message over GPRS connection, if this is possible. See also GPRS on page

132.

• Select Reply via same centre to allow the recipient of your message to send you

a reply via your message centre (network service).

• Select Rename sending profile to change the name of the selected message

profile. The message profile sets are only displayed if your SIM card supports

more than one set.

Overwrite settings

When the text message memory is full, the phone cannot receive or send any new

messages. However, you can set the phone to automatically replace old text

messages in the Inbox and Sent items folders with the new ones.

Press Menu and select Messages, Message settings, Text messages and

Overwriting in inbox or Overwriting in sent items. Select Allowed to set the phone

to replace the old text messages with new ones in the Inbox or the Sent items

folder, respectively.

Settings for multimedia messages

Press Menu and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

Allow multimedia reception. Select No, Yes or In home network to use the

multimedia service. If you select In home network, you cannot receive

multimedia messages outside your home network.

Incoming multimedia messages. Select Retrieve to set the phone to

automatically fetch newly received multimedia messages, or select Reject if

you do not wish to receive multimedia messages.

•

Connection settings. Define WAP connection settings for retrieving

multimedia messages. Activate the set where you want to save the connection

settings and then edit the settings.

•

Settings’ name. Key in a new name for the connection set and press OK.

Homepage. Key in the homepage address of the WAP service that you want

to use, press

for a dot, and press OK.

•

Session mode. Select Permanent or Temporary.

Data bearer . Select GPRS.

Bearer settings. Select the settings for the selected data bearer.

•

GPRS access point. Key in the access point name to establish a

connection to a GPRS network and press OK. You obtain the access

point name from your network operator or service provider.

•

IP address. Key in the address, press

for a dot, and press OK. You

obtain the IP address from your network operator or service provider.

•

Authentication type. Select Secure or Normal.

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

•

Allow adverts. You can receive or reject advertisements.

To receive the multimedia connection settings as a text message

You may receive the multimedia connection settings as a text message from the

network operator or service provider that offers the WAP service you want to use.

For more information, contact your network operator or service provider. You can

also visit Club Nokia’s website (www.club.nokia.com). Availability may vary by

country.

Font size setting

To select the font size for reading and writing messages, press Menu and select

Messages, Message settings, Other settings, and Font size.

Service commands

Press Menu and select Messages and Service commands. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

■ Call register (Menu 2)

The phone registers the phone numbers of missed, received and

dialled calls, and the approximate length and cost of your calls.

The phone registers missed and received calls only if the network supports these

functions, the phone is switched on and within the network’s service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menu, you can, for example, view the date and the time of the call, edit or delete

the phone number from the list, save the number in contacts, or send a message to

the number.

Recent calls lists

Press Menu and select Call register and then select

•

Missed calls to view the list of the last ten phone numbers from which

somebody has tried to call you (network service). The number in front of the

(name or) phone number indicates the amount of call attempts from that

caller.

Tip: When a note about missed calls is displayed, press List to access

the list of phone numbers. Scroll to the number you would like to call

back and press

•

Received calls to view the list of the last ten phone numbers from which you

have most recently accepted calls (network service).

Dialled numbers to view the list of the last 20 phone numbers that you have

most recently called or attempted to call. See also Last number redialling on

page 38.

•

Delete recent call lists to delete the recent calls lists. Select whether you want

to delete all the phone numbers in the recent calls lists, or only the numbers in

the missed calls, received calls or dialled numbers lists. You cannot undo the

operation.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may

vary, depending upon network features, rounding-off for billing, taxes and so

forth.

Press Menu and select Call register and then select

•

Call duration. Scroll to view the approximate duration of your incoming and

outgoing calls in hours, minutes and seconds. The security code is required to

clear the timers.

Each phone line has its own call timers and the timers of the selected line are

displayed. See Line for outgoing calls on page 97.

•

Call costs (network service). Select Last call units or All calls’ units to check the

cost of your most recent call or all calls in terms of units specified within the

Show costs in function.

Select Call cost settings and select Clear counters to clear the counters, or

select Show costs in to set the phone to show the remaining talk time in terms

of charging units or units of currency. Contact your service provider for

charging unit prices.

Select Call cost limit to limit the cost of your calls to a certain amount of

charging units or units of currency. The PIN2 code is required for the call cost

settings.

Note: When no more charging units or currency units are left, calls may only be

possible to the emergency number programmed into your phone (e.g. 112 or

other official emergency number).

•

GPRS data counter. Scroll to check the size of data that were sent or received

in bytes, sent and received data in total, and to clear the counters. The security

code is required to clear the counters.

•

GPRS connection timer. Scroll to check the duration of the last GPRS

connection or the total GPRS connection time. You can also clear the timers.

The security code is required to clear the timers.

■ Profiles (Menu 3)

Your phone has a group of profiles that allow you to personalise

the tone settings of your phone and to activate a profile for

different events and environments. Available profiles are General, Silent, Meeting,

Outdoor, and Pager.

Press Menu and select Profiles. Scroll to a profile and press Select.

• To activate the selected profile, select Activate.

• To set the profile to be active for a certain amount of time up to 24 hours,

select Timed and set the end time. When the time set for the profile expires,

the previous profile that was not timed becomes active.

• To personalise the profile, select Personalise. Select the setting that you want

to change and make the changes.

The settings can also be changed in the Tone settings menu, see Tone settings

on page 102.

In addition you can rename a profile using a Profile name. The General profile

cannot be renamed.

Tip: To quickly change the profile in standby mode

• when the flip is closed, press the power key

, scroll to the profile

that you want to activate and press Select.

• when the flip is open, press the profile key , scroll to the profile that

you want to activate and press Select.

■ Settings (Menu 4)

Time and date settings

Clock

Press Menu and select Settings, Time and date settings and Clock.

Select Show clock (or Hide clock ) to show (or hide) the time on the top right of the

display in standby mode. Select Set the time to adjust the clock to the correct

time, and Time format to select 12-hour or 24-hour time format.

The clock is also used for the functions Messages, Call register, Alarm clock, timed

Profiles, Calendar, screen saver and Notes, for example.

If the battery is removed from the phone for a long time, you may need to reset

the time.

Date

Press Menu and select Settings, Time and date settings and Date.

Select Show date (or Hide date) to show (or hide) the date on the display in

standby mode. Select Set the date to adjust the date. You can also select the date

format.

Auto update of date and time

Press Menu and select Settings, Time and date settings and Auto-update of date &

time (network service). To set the phone to automatically update the time and

date according to the current time zone, select On. To set the phone to ask for a

confirmation before the update, select Confirm first.

The automatic update of date and time does not change the time you have set for

the alarm clock, calendar or the alarm notes. They are in local time. Updating may

cause some alarms that you have set to expire.

Call settings

Call divert

Press Menu and select Settings, Call settings and Call divert (network service).

With call divert, you can direct your incoming calls to another number, for

example, to your voice mailbox number. For details, contact your service provider.

Divert options that are not supported by your SIM card or your network operator

may not be shown.

Select the divert option that you require, such as Divert if busy to divert the voice

calls when your number is busy or when you reject an incoming call.

To set the divert setting to on, select Activate and then select the timeout after

which the call is diverted, if this is available for the call divert option. To set the

call divert to off, select Cancel. To check whether the call divert is activated or not,

select Check status if this is available for the divert option. Several divert options

may be active at the same time.

To see the divert indicators in standby mode, see Essential indicators in standby

mode on page 24.

Anykey answer

Press Menu and select Settings, Call settings and then Anykey answer. Select On

and you can answer an incoming call by briefly pressing any key, except

selection keys

and

, and

Automatic redial

Press Menu and select Settings, Call settings and Automatic redial. Select On and

your phone will make a maximum of ten attempts to connect the call after an

unsuccessful call attempt.

Speed dialling

Press Menu, select Settings, Call settings and Speed dialling. Select On and the

names and phone numbers assigned to the speed dialling keys, from

with the flip closed, or the corresponding number keys of the keyboard, can

be dialled by pressing and holding the corresponding number key.

Call waiting

Press Menu and select Settings, Call settings and Call waiting. Select Activate and

the network will notify you of an incoming call while you have a call in progress

(network service). See Call waiting on page 41.

Summary after call

Press Menu and select Settings, Call settings and Summary after call. Select On

and after each call the phone will briefly display the duration and cost (network

service) of the call.

Send my caller identity

Press Menu and select Settings, Call settings and Send my caller identity. Select

Yes and your phone number will be displayed to the person you are calling

(network service). Select Set by network and the setting agreed upon with your

service provider is used.

Line for outgoing calls

Line for outgoing calls is a network service to select the phone line 1 or 2, that is

the subscriber number, for making calls.

Press Menu and select Settings, Call settings and Line for outgoing calls. If you

select Line 2 and have not subscribed to this network service, you will not be able

to make calls. However, calls on both lines can be answered regardless of the

selected line.

If supported by your SIM card, you can prevent the line selection by selecting the

Lock option.

For more information on availability, contact your network operator or service

provider.

Tip: In standby mode, you can switch from one line to the other by

pressing and holding

Phone settings

Language

Press Menu and select Settings, Phone settings and Language. Select the

language for the display texts. If Automatic is selected, the phone selects the

language according to the information on the SIM card.

Memory status

Press Menu, and select Settings, Phone settings and Memory status. Scroll to view

the amount of free memory, the total used memory and the used memory for each

function.

You may also find the memory information in the menu of some functions, for

example in the Gallery menu.

Security keyguard

When the keypad is locked,

appears on top of the display. When you have set

the security keyguard setting to On and activated it, the keypad lock remains

active if you open the flip. Note that if you have activated the security keyguard, it

does not protect your phone data from PC Suite access.

1. Press Menu and select Settings, Phone settings and Security keyguard.

2. Key in the security code and press OK. The security keyguard code is the same

as your security code, see Security settings on page 104.

3. Select On, if you want to activate the security keyguard.

To activate the security keyguard, press Menu and

, when the flip is closed.

To deactivate the keyguard, press Unlock and OK, if the flip is open. If the flip is

closed, press Unlock and

, then key in the security code.

Cell info display

Press Menu and select Settings, Phone settings and Cell info display. Select On to

set the phone to indicate when it is used in a cellular network based on Micro

Cellular Network (MCN) technology.

If the GPRS connection is set to Always online, the cell identity may not be

received. In that case, set the GPRS connection to When needed, see GPRS

connection on page 132.

Welcome note

Press Menu and select Settings, Phone settings and Welcome note. Key in the note

that you would like to be shown briefly when the phone is switched on. To save

the note, press Options, and select Save.

Network selection

Press Menu and select Settings, Phone settings and Network selection. Select

Automatic and the phone automatically selects one of the cellular networks

available in your area.

If you select Manual, you can select a network that has a roaming agreement with

your home network operator. If No access is displayed, you must select another

network. The phone stays in manual mode until the automatic mode is selected or

another SIM card is inserted into the phone.

Confirm SIM service actions

See SIM services (Menu 14) on page 148.

Help text activation

To set the phone to show or not to show the help texts, press Menu and select

Settings, Phone settings and Help text activation.

See also Using the menu on page 58.

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched

on, press Menu and select Settings, Phone settings and Start-up tone.

Display settings

Wallpaper

You can set your phone to display a background image, known as wallpaper, when

the phone is in standby mode. Some images are pre-saved in the Gallery menu.

You can also receive images via multimedia messages, download them via the

WAP service or use PC Suite from to transfer them from your PC and then save

them in Gallery. Your phone supports JPEG, GIF, BMP and PNG formats.

100

To select wallpaper

1. Press Menu and select Settings, Display settings and Wallpaper.

2. Select Change image to view the folder list in the Gallery menu.

3. Open the image folder and scroll to the desired image

4. To set the image as wallpaper, press Options and select Set as wallpaper

Note that the wallpaper is not displayed when the phone activates the screen

saver.

To activate or deactivate the wallpaper

Press Menu and select Settings, Display settings and Wallpaper. To activate/

deactivate the wallpaper, select On/Off respectively.

Colour schemes

You can change the colour of some display components, for example indicators

and signal bars.

Press Menu and select Settings, Display settings and Colour schemes. Select the

desired colour scheme.

Operator logo

To set your phone to display or hide the operator logo, press Menu and select

Settings, Display settings and Operator logo. If you have not saved any operator

logos, the Operator logo menu is dimmed.

Note that the operator logo is not displayed when the phone activates the screen

saver. For more information on availability of an operator logo via SMS, MMS or

WAP, contact your network operator or your WAP service provider.

101

Screen saver

A digital clock screen saver is used for power saving in standby mode. It is

activated when no function of the phone has been used for a certain time while

the phone’s flip is closed. Press any key to deactivate the screen saver or open the

flip. The screen saver is also deactivated when the phone is out of the network

coverage area.

Press Menu and select Settings, Display settings and Screen saver timeout. Select

the timeout after which the screen saver will be activated. The length of the

timeout can vary from 5 seconds to 60 minutes.

Note that the screen saver overrides all graphics and texts on the display in

standby mode.

Display brightness

You can change the brightness level of the phone display.

Press Menu and select Settings, Display settings and Display brightness. Move the

joystick to the left to decrease and to the right to increase the brightness level,

and press OK to accept it.

Tone settings

Press Menu and select Settings and Tone settings. You can find the same settings

in the Profiles menu, see Profiles (Menu 3) on page 93. Note that the settings you

make, will change the settings in the active profile.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

102

Select Ringing tone for incoming voice calls. To select ringing tones that have

been saved in the Gallery, select Open gallery from the ringing tone list.

Select Ringing volume and Vibrating alert for incoming voice calls and incoming

messages. The vibrating alert does not work when the phone is connected to a

charger, a desktop stand, or a car kit.

Tip: If you donwload a ringing tone or receive one via OTA, you can save it

in the Gallery.

Select Message alert tone to set the alert tone for incoming messages, Keypad

tones, or Warning tones to set the phone to sound tones for example when the

battery is running out of power.

Select Alert for to set the phone to ring only upon calls from phone numbers that

belong to a selected caller group. Scroll to the caller group that you want or All

calls and press Mark.

Accessory settings

Accessory settings menu is only shown if the phone is or has been connected to

one of the following accessories: headsets HDB-4 or HDS-3, handsfree unit

CARK126 or mobile inductive loopset LPS-4.

Press Menu and select Settings and Accessory settings. You can select Headset,

Handsfree or Loopset if the corresponding accessory is or has been connected to

the phone.

103

• Select Default profile to select the profile that you want to be automatically

activated when you connect to the selected accessory. You can select another

profile while the accessory is connected.

• Select Automatic answer to set the phone to automaticallt answer an

incoming call after five seconds. If the Incoming call alert is set to Beep once or

Off, automatic answer will not be used.

• Select Lights to set the lights permanently to On. Select Automatic to set the

lights on for 15 seconds after a keypress. The Lights option is available only

when Handsfree is selected.

Security settings

Note: When security features that restrict calls are in use (call barring, closed

user group and fixed dialling), calls may be possible to certain emergency

numbers in some networks (e.g. 112 or other official emergency numbers).

Press Menu and select Settings and Security settings. Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling to restrict your outgoing calls and text messages to selected

phone numbers if this function is supported by your SIM card. The PIN2 code is

required.

104

When the fixed dialling is on, GPRS connections are not possible except while

sending text messages over a GPRS connection. In this case, the recipient’s

phone number and the message centre number must be included in the fixed

dialling list.

•

Closed user group. Closed user group is a network service that specifies the

group of people whom you can call and who can call you. For more information

contact your network operator or service provider.

Security level. Select Phone and the phone will ask for the security code

whenever a new SIM card is inserted into the phone.

Select Memory to set the phone to request the security code when the SIM

card’s memory is selected and you want to change the memory in use, see

Selecting settings for contacts on page 50 or copy from one memory to

another, Copying contacts on page 54.

•

Access codes to change the security code, PIN code, PIN2 code or barring

password. Codes can only include numbers from 0 to 9.

Restore factory settings

To reset the menu settings to their original values, press Menu and select Settings

and Restore factory settings. Key in the security code and press OK. Note that the

data you have keyed in or downloaded, for example the names and phone

numbers saved in contacts, are not deleted.

105

■ Organiser (Menu 5)

Alarm clock

The alarm clock uses the time format that has been set for the clock. The alarm

clock works even when the phone is switched off.

Press Menu and select Organiser and Alarm clock.

• Select Alarm time, key in the alarm time and press OK.

To change the alarm time, select On.

• Select Alarm tone and you can select a default alarm tone, personalise your

alarm tone by selecting one from a ringing tone list or from the gallery, or set

the radio as your alarm tone.

If you select the radio as an alarm tone, your phone plays the last radio channel

that you have listened to via loudspeaker. If the headset is removed, the

default alarm tone will be used instead of the radio.

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the current time on the

display.

Press Stop to stop the alarm. If you let the alarm continue for a minute or if you

press Snooze, the alarm stops for about ten minutes and then resumes.

If the alarm time is reached while the phone is switched off, the phone switches itself on and

starts sounding the alarm tone. If you press Stop, the phone asks whether you want to

activate the phone for calls, Switch the phone on?. Press No to switch off the phone or Yes to

make and receive calls.

106

Note: Do not press Yes when wireless phone use is prohibited or when it may

cause interference or danger.

Calendar

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays.

The calendar uses shared memory, see Shared memory on page 19.

Press Menu and select Organiser and Calendar.

Tip: To quickly view the current Calendar month, move the joystick to the

right in standby mode.

Scroll to the day you want. The current day is indicated by a frame around the day.

If there are any notes set for the day, the day is in bold type. To view the notes for

the day, press Options and select Day notes.

To view a single note, scroll to the note that you want to view, press Options and

select View. The note view allows you to view the details of the selected note. You

can scroll through the note.

The other options for the calendar views may include:

• Options for making a note, or for sending a note via IR, or as a note directly to

another phone’s calendar or as a text message.

• Options for deleting, editing, moving and repeating a note and for copying a

note to another day.

•

Settings to set the date, time, date or time format, or the first day of the week.

In the Auto-delete option you can set the phone to automaticallt delete old

107

notes after a specified time. However, the repeated notes, for example birthday

notes, will not be deleted.

Making a calendar note

For keying in letters and numbers, see Writing text on page 44.

Press Menu and select Organiser and Calendar or move the joystick to the right in

standby mode to go to the monthly view. Scroll to the date that you want, press

Options and select Make a note. Select one of the following note types:

•

Meeting - Key in the note, press Options and select Save (or search for the

name in contacts and press OK). Key in the location of the meeting, press

Options and select Save. Key in the start time for the meeting and press OK,

and then key in the end time and press OK. To set the alarm for the note, select

With tone or Silent (no alarm tone) and then set the alarm time.

Call - Key in the phone number, press Options and select Save. Key in the

name, press Options and select Save. (Instead of keying in the phone number,

you can search for the name and number in contacts). Then key in the time for

the call and press OK. To set the alarm for the note, select With tone or Silent

(no alarm tone) and then set the alarm time.

•

Birthday - Key in the person’s name (or press Options and search for it in

contacts and press OK), press Options and select Save. Then key in the year of

birth, and press OK. To set the alarm for the note, select With tone or Silent (no

alarm tone) and then set the alarm time.

Memo - Key in the note, press Options and select Save (or search for the

name in contacts and press OK). Key in the end day for the note and press OK.

108

To set the alarm for the note, select With tone or Silent (no alarm tone) and

then set the alarm time.

•

Reminder - Key in the subject for the reminder, press Options and select

Save (or search for the name in contacts and press OK). To set the alarm for the

note, select Alarm on and then set the alarm time.

When you have set the alarm, the indicator

notes.

is displayed when you view the

When the phone sounds an alarm for a note

The phone beeps, and displays the note. Wheh a call note indicator

is shown

on the display, you can call the displayed number by pressing

. To stop the

alarm and view the note, press View. To stop the alarm without viewing the note,

press Exit.

To-do list

You can save a note for a task that you have to do, select a priority level for the

note and mark it as done when you have completed it. You can sort the notes by

priority or by date.

The to-do list uses shared memory, see Shared memory on page 19.

Press Menu and select Organiser and To-do list to view the list of notes. Press

Options or scroll to the desired note and then press Options.

• To add a new note, select Add. Key in the subject for the note. When you have

keyed in the maximum number of characters for a note, no further characters

will be accepted. Press Options and select Save. Select the priority for the note

109

High, Medium or Low. The phone automatically sets the time of expiry without

an alarm for the note.

For Dictionary, see Setting predictive text input on or off on page 46.

• You can also view and delete the selected note and delete all the notes that

you have marked as completed. You can sort the notes by priority, send them

to another phone, save them as a calendar note, or access the calendar. While

viewing a note, you can also select an option to edit the selected note, edit the

deadline or priority for the note, or mark the note as completed.

■ Notes (Menu 6)

Note: Your phone must be switched on to use this function.

Do not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

You can use the Notes application for writing and sending notes via IR, SMS or

MMS.

The Notes application uses shared memory, see Shared memory on page 19.

1. To access Notes, press Menu and select Notes or type any character when the

messaging keyboard is open. The phone will ask you to set the date and time, if

they have not already been set when you start to write a note.

2. Press Options and select Make a note, see Writing text on page 44.

3. Key in the note and select Save.

110

You can insert the current time and date to the note. If there is not enough

space to insert them to the note, the phone will ask you to delete the

appropriate number of characters from your note.

You can also send the note via IR, MMS, or as a text message (SMS). If the note

is too long to be sent as a text message, the phone will ask you to delete the

appropiate number of characters from your note.

The other options for notes include options for viewing, deleting, and editing a

note. While editing a note, you can also exit the text editor without saving the

changes.

■ Radio (Menu 7)

Note: Your phone must be switched on to use this function.

Do not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

To listen to the radio on your phone, connect the headset HDS-3 (stereo) or HDB-4

(mono) to the headset connector on the bottom of the phone. The lead of the

headset functions as the radio antenna, so let it hang freely.

Note that the quality of the radio broadcast depends on the radio station’s

coverage in that particular area.

1. To turn on the radio, press Menu and select Radio. The following are shown on

the display:

• The channel location number and the name of the radio channel.

111

• The frequency of the radio channel.

2. If you have pre-saved radio channels, you can scroll to the channel that you

would like to listen to, or select a radio channel location from 1 to 9 by

pressing the corresponding number key.

When using the headset HDB-4 or HDS-3, press the headset key to scroll to the

desired saved radio channel that you have saved.

3. When the radio is on, press Options and select Switch off to turn off the radio.

Tip: To return to standby mode, press

briefly; to quickly turn off the

radio, press and hold

Tuning a radio channel

When the radio is on, move the joystick up or down to start the channel search.

Searching stops when a channel has been found. To save the channel, press

Options, and select Save channel. Key in the name of the channel and press OK.

Select the location where you want to save the channel.

Tip: To quickly save the channel in locations 1 to 9, press and hold the

corresponding number key, then key in the name of the channel and press

OK.

112

Using the radio

When the radio is on, press Options and select

•

Switch off to turn off the radio.

Save channel to save the radio channel that you have found, refer to Tuning a

radio channel above. Up to 20 radio channels can be saved.

•

Automatic tuning. Move the joystick up or down to start searching upwards or

downwards for channels. The search stops when a channel has been found,

press OK. To save the channel, see Save channel above.

Manual tuning. Move the joystick up or down to start searching upwards or

downwards for channels, or hold the joystick in the up or down position to

search for channels more quickly. To save the channel, press OK and see Save

channel above.

Tip: To quickly select Manual tuning, press

when in the Radio

menu.

•

Set frequency. If you know the frequency of the radio channel to which you

would like to listen (between 87.5 MHz and 108.0 MHz), key it in and press OK.

To save the channel, see the Save channel option.

Tip: To quickly select Set frequency, press

when in the Radio

menu.

•

Delete channel. To delete a saved channel, scroll to the desired channel, select

Delete and OK.

Rename. Key in a new name for the saved channel and press OK.

113

•

Loudspeaker (or Headset) to listen to the radio through a loudspeaker (or

headset). Keep the headset connected to the phone, because the lead of the

headset functions as the radio antenna. Note that if you receive an incoming

call, it is always routed to the headset.

Mono output (or Stereo output) to listen to the radio in mono (or in stereo).

You can make a call or answer an incoming call while listening to the radio, the

radio is muted. When you end the call, the radio will automatically be turned back

on. You can also use other functions of the phone, for example, write messages or

play games, while listening to the radio.

When an application using a GPRS or HSCSD connection is sending or receiving

data, it may interfere with the radio.

■ Gallery (Menu 8)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

You can save images and ringing tones, for example, that have been received in

multimeadia messages, in the folders of the gallery, see Reading and replying to a

multimedia message on page 76.

The gallery uses shared memory, see Shared memory on page 19.

1. Press Menu and select Gallery. The list of options is shown.

2. Select View folders to open the list of folders.

114

Other available options are:

•

Add folder to add a new folder. Key in a name for the folder and press OK.

Delete folder to select a folder you want to delete. You cannot delete the

folders that were originally on the phone.

•

Rename folder to select a folder you want to rename. You cannot rename

the folders that were originally on the phone.

Gallery downloads to download more images and tones. Select Image

downloads or Tone downloads. The list of available WAP bookmarks is

shown. Select More bookmarks to access the list of WAP bookmarks in the

Services menu, see Bookmarks on page 142.

Select the appropriate bookmark to connect to the desired WAP site. If the

connection fails, you may not be able to access the WAP page from the

WAP service whose connection settings are currently active. In this case,

enter the Services menu and activate another set of service settings, see

Connecting to a WAP service on page 138. Try again to connect to the WAP

site.

For the availability of different WAP services, pricing and tariffs, contact

your network operator and/or the WAP service provider.

3. Open the desired folder and the list of files in the folder is shown. Graphics and

Tones are the original folders in the phone.

4. Scroll to the desired file. Press Options and some of the following options are

available:

•

Open to open the selected file.

115

•

Delete to delete the selected file.

Move to move a file to another folder.

Rename to give a new name to the file.

Set as wallpaper to set the selected file as wallpaper.

Set as ring tone to set the selected file as the ringing tone.

Details to see the details of the file, for example, the size of the file.

Sort to sort the files and folders by date, type, name or size.

■ Games (Menu 9)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

Launching a game

1. Press Menu and select Games and Select game.

2. Scroll to a game or a game set (the name depends on the game).

3. Press Options and select Open or press

. If the selection is a single game, it

will be launched.

Otherwise, a list of games in the selected game set is displayed. To launch a

single game, scroll to the desired game and press Options and select Open, or

press

116

Note that running some games may consume the phone’s battery faster (and

you may need to connect the phone to the charger).

Other options available for a game or game set

For Options for games, see Other options available for an application or

application set on page 119.

Game downloads

Press Menu and select Games and Game downloads. The list of available WAP

bookmarks is shown. Select More bookmarks to access the list of WAP bookmarks

in the Services menu, see Bookmarks on page 142.

Select the appropriate bookmark to connect to the desired WAP site. If the

connection fails, you may not be able to access the WAP site from the WAP service

whose connection settings are currently active. In this case, enter the Services

menu and activate another set of service settings, see Connecting to a WAP

service on 138. Try again to connect to the WAP site.

For the availability of different WAP services, pricing and tariffs, contact your

network operator and/or the WAP service provider.

Note that when downloading a game or an application, it may be saved in the

Applications menu instead of the Games menu.

117

Memory status for games

To view the amount of memory available for game and application installations,

press Menu and select Games and Memory. See also Memory status for

applications on page 121.

The games use shared memory, see Shared memory on page 19.

Game settings

Press Menu and select Games and Settings to set sounds, lights and shakes for the

game.

■ Applications (Menu 10)

Note: The phone must be switched on to use this function. Do

not switch on the phone when the use of a wireless phone is prohibited or when it

may cause interference or danger.

This menu allows you to manage Java applications installed on your phone. Your

phone software includes some Java applications that were specially designed for

this Nokia phone. Various service providers offer other applications via WAP

services or they can be downloaded to your phone from a PC using a data cable or

an IR connection. Before you can use any of these applications you have to

download them onto your phone.

118

Launching an application

1. Press Menu and select Applications and Select application.

2. Scroll to an application or an application set (the name depends on the

application).

3. Press Options and select Open or press

. If the selection is a single

application, it will be launched.

Otherwise, a list of applications in the selected application set is displayed. To

launch a single application, scroll to the desired application and press Options

and select Open or press

Note that running some applications may consume the phone’s battery faster

(and you may need to connect the phone to the charger).

Other options available for an application or application set

•

Delete to delete the application or application set from your phone.

Note that if you delete a pre-installed application or an application set from

your phone, you may download it again to your phone from the Nokia Software

Market, www.softwaremarket.nokia.com/wap or

www.softwaremarket.nokia.com/6800.

•

Web access to restrict the application from accessing the network. Select Ask

first and the phone will ask you for net access, Allowed to allow the net access,

or Not allowed not to allow the net access.

Update version to check if a new version of the application is available for

download from the WAP services.

119

•

Web page to provide further information or additional data for the application

from an Internet page. This is a network service and the menu is shown only if

an Internet address has been provided with the application.

Details to give additional information about the application.

Downloading an application

You can download new Java applications in different ways:

• Press Menu and select Applications and App. downloads and the list of

available WAP bookmarks is shown. Select More bookmarks to access the list

of WAP bookmarks in the Services menu, see Bookmarks on page 142.

Select the appropriate bookmark to connect to the desired WAP site. If the

connection fails, you may not be able to access the WAP page from the WAP

service whose connection settings are currently active. In this case, enter the

Services menu and activate another set of service settings, see Connecting to a

WAP service on 138. Try again to connect to the WAP site.

For the availability of different WAP services, pricing and tariffs, contact your

network operator and/or the WAP service provider.

• Press Menu and select Services to find a WAP page to download an

appropriate Java application, see Browsing the pages of a WAP service on page

139.

• Use the game download function, see Game downloads on page 117.

• Use the Nokia Application installer from PC Suite to download the applications

to your phone.

120

Note that Nokia does not warrant for applications from non-Nokia sites. If you

choose to download Java applications from them, you should take the same

precautions, for security or content, as you would with any site.

Note that when downloading a game or an application, it may be saved in the

Games menu instead of the Applications menu.

Memory status for applications

To view the amount of memory available for game and application installations,

press Menu and select Applications and Memory.

The applications use shared memory, see Shared memory on page 19.

■ Extras (Menu 11)

Note: Your phone must be switched on to use the functions in

Extras menu. Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root, and converts currency values.

This calculator has a limited accuracy and rounding errors may occur, especially in long

divisions.

1. Press Menu and select Extras and Calculator.

121

2. When ’0’ is displayed on the screen, key in the first number of the calculation,

press for a decimal point or the corresponding symbol on the keyboard,

if the flip is open.

3. Press Options and select Add, Subtract, Multiply, Divide, Square, Square root or

Change sign.

If the flip is open, you can also use the corresponding calculation symbols of

the keyboard, if available.

Tip: Alternatively, press

once to add, twice to subtract, three

times to multiply or four times to divide, if you use the calculator with

the flip closed.

4. Key in the second number.

5. For the total, press Options and select Equals. Repeat steps 3 to 5 as many

times as is necessary.

6. To start a new calculation, first press and hold Clear.

Perfoming a currency conversion

1. Press Menu and select Extras and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

decimal point, and press OK. The exchange rate remains in the memory until

you replace it with another one.

3. To perform the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

122

You can also perform the currency conversion in standby mode. Key in the amount

to be converted, press Options and select In domestic or In foreign.

Wallet

In Wallet you can save personal information, such as credit card numbers and

make purchases using your phone.

You can access wallet via the Wallet menu or via the WAP browser, see Options

while browsing on page 139.

When you access the wallet for the first time, you need to create your own wallet

code. At Create wallet code: key in the code and press OK to confirm it and at

Verify wallet code: key in the code again and press OK.

If you want to delete all the contents of the wallet and the wallet code, key in

*#7370925538# (or *#res0wallet# in letters) in standby mode. You also need the

phone’s security code, see also Access codes on page 14.

Saving and changing personal card information

To access the wallet, press Menu, select Extras and Wallet. If required, key in your

wallet code and press OK. Select Cards to view the list of cards and scroll to the

desired card. The maximum number of cards is five.

• To save information on a card, press Options and select View. Select

•

Card info to key in, for example, the card holder’s name, card type, number

and expiry information.

•

User info to save the user name and password.

123

•

Shipping info to save your contact information.

Billing info to save the contact information in case the invoicing address

differs from your own, for example with company credit cards.

•

Receipt info to save phone numbers and e-mail addresses to which you

want the service provider to send a receipt of your purchase.

• To make a copy of the card, press Options and select Copy card.

• To delete all the information on the card, press Options and select Clear card.

• To rename the card, press Options and select Rename card.

Personal notes

You can save up to 30 personal notes, for example passwords, codes or notations.

Press Menu, select Extras, Wallet and Personal notes. Press Options and you can

view, add, edit a selected note and sort notes either by name or date. Send as text

copies the note as a text message. Copy to calendar copies the note to the

calendar as a memo. Use number extracts numbers from a note.

Wallet settings

Press Menu, select Extras, Wallet and Settings. Select

•

Code request to set the wallet code request to on or off. You need to key in the

correct wallet code before you can set the code request to on or off.

Change code to change the wallet code.

124

Guidelines for paying for your purchases with wallet

1. Access the desired WAP site to do shoppings, see Connecting to a WAP service

on page 138, and choose the product you want to buy.

2. To pay for your purchases, press Options and select Use wallet info, see Options

while browsing on page 139.

3. Select the card with which you want to pay. Fill in the data form you receive

from the service provider by transferring the credit card details from the

wallet. If you want to fill in all the fields automatically, select Fill in all fields.

The option is shown only when the WAP service supports the Electronic

Commerce Modeling Language standard. You can also fill in the form by

selecting information fields from the card one by one. The phone displays the

completed form.

4. Approve the purchase and the information is forwarded.

5. You may receive a sign-in document from the WAP service that you must sign

in to make the purchase binding, see Digital signature on page 147.

6. To close the wallet, select Close wallet. See Options while browsing on page

139.

Synchronisation

You can save your calendar and contacts data on a remote Internet server or on a

compatible PC. If you have saved data on the remote Internet server, you can

synchronise your phone by starting the synchronisation from your phone. You can

also synchronise the data in your phone’s contacts and calendar to correspond

with the data on your PC by starting the synchronisation from your PC.

125

Note that answering an incoming call during synchronisation will end the

synchronisation process and you will need to start it again.

Synchronising from your phone

Before synchronising from your phone, you may need to do the following:

• Subscribe to a synchronisation service. For more information on availability

and the synchronisation service settings, contact your network operator or

service provider.

• Obtain the synchronisation settings from your network operator or service

provider.

You may receive the synchronisation settings as a text message, see Saving the

synchronisation settings received as a text message on page 127 or you may

have to key in the settings manually, see Keying in the synchronisation settings

manually on page 127.

To start the synchronisation from your phone:

1. Press Menu and select Services, Active service settings and select the

connection settings that you need for synchronisation.

The synchronisation settings may differ from the service settings that are

required for WAP browsing. After synchronising, change your Active service

settings back to the previous ones if you want to use other WAP services later.

2. Mark the data that are going to be synchronised. See Data to be synchronised

in Keying in the synchronisation settings manually on page 127.

3. Press Menu and select Extras, Synchronisation and Synchronise.

126

4. The marked data in the active set will be synchronised after confirmation.

Note that synchronising for the first time may take time up to 30 minutes, if

contacts or calendar are full.

Saving the synchronisation settings received as a text message

When you receive the synchronisation settings as a text message, Synchronisation

settings received is displayed.

Press Options and select Details to view the received settings first, Save to save

the synchronisation settings, or Discard to discard them.

Keying in the synchronisation settings manually

Press Menu select Extras, Synchronisation and Settings.

Select Active Internet sync. settings.

You need to activate the set where you want to save the synchronisation settings.

A set is a collection of settings required to make a connection to a service.

Scroll to the set that you want to activate and press Activate.

Select Edit active Internet sync. settings. Select each setting one by one and key in

all the required settings.

•

Settings’ name. Key in the name for the set and press OK.

Data to be synchronised. Mark the data that you want to synchronise, Contacts

and/or Calendar, and press Done.

•

Database addresses. Select Contacts database and/or Calendar database to be

edited. Key in the name of the database and press OK.

127

•

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

Synchronisation server. Key in the name of the server and press OK.

Synchronising from your PC

To synchronise contacts and calendar from your PC, use either an IR connection or

a data cable. You will also need the PC Suite software of your phone installed on

your PC. Start the synchronisation from your PC using PC suite. After

synchronising, the data on the phone and on the PC are the same.

Countdown timer

Press Menu and select Extras and Countdown timer. Key in the alarm time in

hours and minutes and press OK. If you wish, write a text note which will be

displayed when the time expires, and press OK to start the countdown timer.

• To change the countdown time, select Change time, or to stop the timer, select

Stop timer.

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note text if it is set or else Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm stops automatically

within 30 seconds. To stop the alarm and to delete the text note, press OK.

128

Stopwatch

You can measure time, record intermediate times or lap times using the

stopwatch. During timing, the other functions of the phone can be used. To set the

stopwatch to run in the background, press

Note: Using the stopwatch consumes the battery and the phone’s operating time

will be reduced. Be careful not to let it run in the background when performing

other operations with your phone.

Timing and split timing

1. Press Menu, select Extras, Stopwatch and Split timing. You can select Continue

if you have set the stopwatch to run in the background.

2. Press Start to start timing. Press Split every time you want to record an

intermediate time. The intermediate times are listed below the running time on

the display. Scroll to view the times.

3. Press Stop to stop timing.

4. Press Options and select

Start to start the timing again. The new time is added to the previous one.

Save to save the time. Key in a name for the measured time and press OK. If no

name is keyed in, the total time is used as the title.

Reset to reset the time without saving it.

129

Lap timing

Press Menu, select Extras, Stopwatch and Lap timing. Press Start to start timing

and Lap to record a lap time. Press Stop to stop the lap timing. Press Options and

you can save or reset the lap times. Refer to Timing and split timing above.

Viewing and deleting times

Press Menu, select Extras, and Stopwatch.

If the stopwatch has not been reset, you can select Show last to view the most

recent measured time. Select View times and a list of names or final times of the

time sets is shown, select the time set that you want to view.

To delete the saved times, select Delete times. Select Delete all and press OK, or

select One by one, scroll to the times that you want to delete, press Delete and

press OK.

■ Connectivity (Menu 12)

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR

connection, the device with which you want to establish a connection must be

IrDA compliant. You can send or receive data such as business cards and calendar

notes to or from a compatible phone or data device (for example a computer) via

the IR port of your phone.

Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

130

Note: Your phone must be switched on to use this function. Do not switch the

phone on when wireless phone use is prohibited or when it may cause

interference or danger.

Sending and receiving data via IR

• Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices. The

preferable distance between the two devices in an infrared connection should

be one meter at most.

• To activate the IR port of your phone to receive data via IR, press Menu and

select Connectivity and Infrared.

• The user of the sending phone selects the desired IR function to start data

transfer.

If the data transfer is not started within two minutes after the activation of the IR

port, the connection is cancelled and has to be started again.

IR connection indicator

• When

phone is ready to send or receive data via its IR port.

• When blinks, your phone is trying to connect to the other device or a

connection has been lost.

is shown continuously, the IR connection is activated and your

Note that the IR connection deactivates automatically.

131

GPRS

GPRS connection

You can set the phone to automatically register to a GPRS network when you

switch the phone on. Press Menu and select Connectivity, GPRS, GPRS connection

and Always online. When you start an application using GPRS, the connection

between the phone and the network is established, and data transfer is possible.

When you end the application, the GPRS connection ends but the registration

with the GPRS network remains.

If you select When needed, the GPRS registration and connection are established

when required by an application using GPRS and closed when you end the

application.

When the GPRS connection is established, the indicator

left of the display. If you receive a call or a text message, or make a call during a

GPRS connection, the indicator will be shown on the top right of the display to

is shown on the top

indicate that the GPRS connection has been suspended (on hold).

GPRS modem settings

You can connect the phone via an infrared or a data cable connection to a

compatible PC and use the phone as a modem to enable GPRS connectivity from

the PC.

Press Menu and select Connectivity, GPRS and GPRS modem settings. Select

Active access point and activate the access point that you want to use. Select Edit

active access point to change the access point settings.

132

• Scroll to Alias for access point and press Select. Key in the name that you

would like for the activated access point and press OK.

• Scroll to GPRS access point and press Select. Key in the Access Point Name

(APN) and press OK.

An access point name is needed to establish a connection to a GPRS network.

You can obtain the Access Point Name from your network operator or service

provider.

You can also set the GPRS dial-up service settings (Access Point Name) on your PC

using the Nokia Modem Options software, see PC Suite on page 149. If you have

set the settings on both your PC and on your phone, note that the PC ’s settings

will be used.

■ WAP services (Menu 13)

Note: Your phone must be switched on to use this function. Do

not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

You can access various WAP services such as banking, news, weather reports and

entertainment. These services are specially designed for mobile phones and they

are maintained by WAP service providers.

Check the availability of WAP services, pricing and tariffs with your network

operator and/or the service provider whose service you wish to use. Service

providers will also give you instructions on how to use their services.

133

The WAP services use Wireless Mark-Up Language (WML) on their WAP pages.

Internet web pages cannot be viewed on your phone.

Basic steps for accessing and using WAP services

1. Save the service settings that are required to access the WAP service that you

want to use. See page 134.

2. Make a connection to the given WAP service. See page 138.

3. Start browsing the pages of the WAP service. See page 139.

4. Once you are finished browsing, end the connection to the WAP service. See

page 141.

Setting up the phone for a WAP service

You may receive the service settings as a text message from the network operator

or service provider that offers the WAP service that you want to use. For more

information, contact your network operator or service provider, or visit Club

Nokia’s website (www.club.nokia.com).

You can also key in the settings manually or add and edit the settings using PC

Suite. For the appropriate settings, contact your network operator or service

provider. The WAP settings may be available, for example, on their website.

Saving the service settings received as a text message

When you receive the service settings as a text message, Service settings received

is displayed.

134

• To save the received settings, press Options and select Save.

If no settings are saved in Active service settings, the settings are saved in the

first free connection set and are also activated.

If there are settings saved in Active service settings, Activate saved service

settings? will be displayed. To activate the saved settings, press Yes, or to save

them only, press No.

• To discard the received settings, press Options and select Discard.

• To view the received settings first, press Options and select View. To save the

settings, press Save.

Keying in the service settings manually

1. Press Menu and select Services, Settings and Connection settings.

2. Select Active service settings.

You need to activate the set where you want to save the service settings. A set

is a collection of settings required to make a connection to a WAP service.

3. Scroll to the set you would like to activate and press Activate.

4. Select Edit active service settings.

Select each of the settings one by one and key in all the required settings.

•

Setting’s name - Key in the new name for the connection set and press OK.

Homepage - Key in the homepage address of the WAP service that you

want to use, press for a dot, and press OK.

•

Session mode - Select Permanent or Temporary.

135

•

Connection security - Select On or Off.

When the connection security is On, the phone tries to use a secure

connection with the WAP service. If a secure connection is not available,

the connection will not be made. If you wish to connect anyway, with a

non-secure connection, you must set the connection security to Off.

•

Data bearer - Select GMS data or GPRS.

Bearer settings - Settings for the selected bearer, see Settings when GSM

data is the selected data bearer and Settings when GPRS is the selected

data bearer below.

For pricing, connection speed and other information, contact your network

operator or service provider.

Settings when GSM data is the selected data bearer

•

Dial-up number - Key in the phone number and press OK.

•

IP address - Key in the address, press

for a dot, and press OK. You obtain

the IP address from your network operator or service provider.

•

Authentication type - Select Secure or Normal.

Data call type - Select Analogue or ISDN.

Data call speed - Select the speed you want to use, or select Automatic.

Automatic is available only if the current selected data call type is Analogue.

The actual data call speed depends on the service provider.

•

136

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

Display terminal window - Select Yes, if you want the server to perform user

authentication when you access intranet sites during a dial-up connection.

Settings when GPRS is the selected data bearer

•

GPRS access point - Key in the access point name and press OK.

An access point name is needed to establish a connection to a GPRS network.

You obtain the access point name from your network operator or service

provider.

•

IP address - Key in the address, press

for a dot, and press OK. You obtain

the IP address from your network operator or service provider.

•

Authentication type - Select Secure or Normal.

type uses the user name and password keyed in the following settings. If you

select Manual, the login information is required each time when establishing a

connection.

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

137

Connecting to a WAP service

Firstly, make sure that the service settings of the WAP service that you want to

use have been activated. To activate the settings:

• Press Menu and select Services, Settings and Connection settings. Select

Active service settings and scroll to the set you want to activate and press

Activate.

Secondly, make a connection to the WAP service. There are three ways to connect:

• Open the homepage of the WAP service:

Press Menu and select Services and Home.

Tip: To quickly open the homepage of a WAP service when the flip is

closed, press and hold

in standby mode. When the flip is open,

press the corresponding number key.

Or:

• Select a bookmark of the WAP service:

Press Menu and select Services, Bookmarks, and select a bookmark.

If the bookmark does not work with the current active service settings, activate

another set of service settings and try again.

Or:

• Key in the address of the WAP service:

Press Menu and select Services and then Go to address. Key in the address of

the WAP service, press

for special characters (or

if the flip is open),

and press OK.

138

Note that it is not necessary to add the prefix http:// in front of the address

since it will be added automatically.

Browsing the pages of a WAP service

After you have made a connection to the WAP service, you can start browsing its

WAP pages. The function of the phone keys may vary in different WAP services.

Follow the text guides on the phone display. For more information, contact your

WAP service provider.

Note that if GPRS is selected as the data bearer, the indicator

top left of the display during browsing. If you receive a call or a text message, or

make a call during a GPRS connection, the indicator will be shown on the top

is shown on the

right of the display to indicate that the GPRS connection has been suspended (on

hold).

Using the phone keys while browsing

• Move the joystick up or down to browse through the WAP page.

• To select a highlighted item, press

• To enter letters and numbers, press the keys

special characters, press the key . When the flip of your phone is open,

and to enter

you can key in letters and numbers normally.

Options while browsing

Press Options and select one of the options available. The service provider may

also offer other options. Select

139

•

Home to return to the homepage of the WAP service.

Bookmarks. See page 142.

Call, Edit, Open row, Open, Open list to call, to key in text or to select a

highlighted item on the WAP page.

•

Add bookmark to save the WAP page as a bookmark.

View image or View images to view images and animations from the WAP

page.

•

Go to address to key in the address of the WAP service you want to access.

Service inbox. See page 143.

Use wallet info and Close wallet. See Guidelines for paying for your purchases

with wallet on page 125.

•

Appear. settings. See Appearance settings of the WAP browser on page 141.

Cookies. See page 147.

Use detail to copy a number from the WAP page for saving or making a call. If

the WAP page contains several numbers, you can select the desired one.

•

Reload to reload and update the current WAP page.

Clear the cache. See The cache memory on page 144.

Security info to view security information about the current WAP connection

and the server.

•

Quit. See Ending a WAP connection on page 141.

140

Direct calling

The WAP browser supports functions that you can access while browsing. You can

make a voice call, send DTMF tones while a voice call is in progress, and save a

name and a phone number from a WAP page in contacts.

Ending a WAP connection

To quit browsing and to end the connection, press Options and select Quit. When

Quit browsing? is shown, press Yes.

Alternatively, press

. If GSM data is the selected data bearer, press

twice.

The phone ends the connection to the WAP service.

Appearance settings of the WAP browser

1. While browsing, press Options and select Appear. settings, or in standby mode,

press Menu and select Services, Settings and Appearance settings.

2. Select Text wrapping or Show images.

3. Select On or Off for Text wrapping and Yes or No for Show images.

When Text wrapping is set to On, the text continues on the next line if it

cannot be shown on one line. If you select Off , the text is abbreviated, if it is

too long to be shown on one line.

When Show images is set to No, any pictures appearing on the WAP page are

not shown. This can speed up the browsing of WAP pages that contain a lot of

pictures.

141

Bookmarks

You can save WAP addresses as bookmarks in the phone’s memory.

1. While browsing, press Options and select Bookmarks, or in standby mode,

press Menu and select Services and Bookmarks.

2. Scroll to the bookmark you want to use and press Options.

3. Select one of the following options:

Go to to make a connection to the WAP page associated with the bookmark.

View, Edit or Delete to view, modify or delete the selected bookmark.

Send to send the selected bookmark directly to another phone, select As

bookmark, or to send the bookmark as a text message, select As text message.

New bookmark to create a new bookmark without connecting to the WAP

service. Key in the address and the title of the WAP page and press OK.

Note that your phone may have some pre-installed bookmarks for sites that are

not affiliated to Nokia. Nokia does not guarantee or endorse these sites. If you

choose to access them, you should take the same precautions for security and

content as you would with any Internet site.

Receiving a bookmark

When you have received a bookmark, 1 bookmark received is displayed. Press

View, then press Options and select View to view the bookmark, Save to save the

bookmark, or Discard to discard it.

142

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider. Service messages are notifications of, for example news

headlines, and they may contain a text message or an address of a WAP service.

To access the Service inbox in standby mode, when you have received a service

message, press View.

• If you press Exit the message is moved to the Service inbox. To access the

Service inbox later, press Menu and select Services and Service inbox.

To access the Service inbox while browsing, press Options and select Service

inbox. Scroll to the message you want, press Options and select

•

Retrieve to activate the WML browser and download the marked content.

Details to display detailed information on the service notification.

Delete to delete the selected service notification.

Setting the phone to receive service messages

Press Menu and select Services, Settings, Service inbox settings, and Service

messages. To set the phone to receive service messages,select On. If you select Off,

the phone will not receive service messages.

143

The cache memory

Note: The information or services you have accessed are stored in the cache of

your phone. A cache is a buffer memory, which is used to store data temporarily.

If you have tried to access or have accessed confidential information requiring

passwords (for example, your bank account), empty the cache of your phone after

each use.

To empty the cache,

• while browsing, press Options and select Clear the cache, or

• in standby mode, press Menu and select Services and Clear the cache.

Browser security settings

Security features are required for some WAP services, such as banking services or

shopping on a WAP site. For such connections you need security certificates and

possibly a security module, which may be available on your SIM card. For more

information, contact your service provider.

Security module

The security module can contain certificates as well as private and public keys. The

security module provides security services for WAP-related applications, and

allows you to use a digital signature. The certificates are saved in the security

module by the service provider, or they can be downloaded from a WAP site.

Press Menu and select Services, Settings and Security module settings. Select

•

Security module details to show the security module title, its status,

manufacturer and serial number.

144

•

Module PIN request to set the phone to ask for the module PIN when using

services provided by the security module. Key in the code and select On. To

disable the module PIN request, select Off.

•

Change module PIN to change the module PIN, if allowed by the security

module. Key in the current module PIN code, then key in the new code twice.

Change signing PIN to view a list of signing PINs. Select the signing PIN that

you want to change. Key in the current PIN code, then key in the new code

twice.