®
G E T I T N O W
C A M E R A P H O N E
User Guide
6215i
Nokia 6215i User Guide
1
LEGAL INFORMATION
PART NO. 9248917, ISSUE NO. 2a
Copyright ©2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and the Nokia Original Enhancements logos are trademarks
or registered trademarks of Nokia Corporation. Other company and product names mentioned
herein may be trademarks or trade names of their respective owners.
US Patent No. 5818437 and other pending patents.
T9 text input software copyright ©1999-2007 Tegic Communications, Inc. All rights reserved.
cdma2000 is a registered certification mark of the Telecommunications Industry Association.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
The information contained in this user guide was written for the Nokia 6215i products. Nokia
operates a policy of ongoing development. Nokia reserves the right to make changes to any
of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS
REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Export Controls
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
Copyright protections may prevent some images, ringtones, and other content from being
copied, modified, transferred, or forwarded.
FCC/Industry Canada Notice
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user’s authority to operate this equipment.
2
C o n t e n t s
Contents
For your safety..................................................................................... 4
Welcome............................................................................................... 6
3. Text entry..................................................................................... 18
4. Get It Now ................................................................................... 20
5. Messaging.................................................................................... 24
6. Contacts....................................................................................... 32
7. Recent calls.................................................................................. 38
8. Settings and tools....................................................................... 39
9. Enhancements.............................................................................. 49
10. Reference information................................................................ 50
Care and maintenance....................................................................... 51
Additional safety information.......................................................... 52
Index................................................................................................... 57
3
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited
or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road safety.
INTERFERENCE
Do not switch the device on when wireless phone use is prohibited
or when it may cause interference or danger.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference
in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the device at a refueling point. Don't use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don't use the device where blasting
is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
4
F o r y o u r s a f e t y
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the device is switched on and in service. Press the end key
as many times as needed to clear the display and return to the main
screen. Enter the emergency number, then press the send key. Give
your location. Do not end the call until given permission to do so.
■ About your phone
The wireless phone described in this guide is approved for use on the following
Verizon networks: CDMA 800 and 1900 MHz and CDMA2000 1xRTT. Contact
Verizon for more information about networks.
When using the features in this phone, obey all laws and respect privacy and the
legitimate rights of others.
Warning: To use any features in this phone, the phone must be switched
on. Do not switch the phone on when wireless phone use may cause
interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this phone depend on features in the wireless network to function.
These network services may not be available on all networks or you may have
to make specific arrangements with your service provider before you can utilize
them. Your service provider may need to give you additional instructions for their
use and explain what charges will apply. Some networks may have limitations
that affect how you can use network services. For instance, some networks may
not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your phone. If so, they will not appear on your phone menu. Your phone
may also have been specially configured. This configuration may include changes
in menu names, menu order, and icons. Contact Verizon for more information.
This phone supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
Some features of this phone, such as Get It Now and e-mail messaging, require
network support for these technologies.
5
W e l c o m e
Welcome
Congratulations on your purchase of this Nokia mobile phone. Your phone provides
many functions that are practical for daily use, such as a hands-free speaker phone,
alarm clock, calculator, calendar, camera, image and data downloads, and more.
To personalize your phone you can set your favorite ringtones.
■ Getting help
If you need help, the Nokia Care Contact Center is available for assistance. Before
calling, we recommend that you write down the electronic serial number (ESN)
and your zip code (only in the US) and have it available.
Find your device label
The ESN is found on the type
label, which is located beneath
the battery on the back of the
phone. See "Remove the back
cover," p. 13.
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
Nokia support and contact information
version of this guide, additional information, downloads, and services related
to your Nokia product.
On the Web site, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia
For maintenance services, check your nearest Nokia Care Contact Center location
6
W e l c o m e
Billing and customer service
To reach Verizon’s billing and customer service support, dial 1-800-256-4646.
■ Get the most out of this guide
The following sections illustrate the various components of your phone. Familiarize
yourself with these sections to help you understand the instructions that follow.
This guide uses certain terms for the steps that you are asked to perform.
•
•
•
Press means to press and release a key quickly. For example, press 7 means
press the key on the keypad that is labeled with the number 7 and pqrs.
Press and hold means to press and hold a key for 2–3 seconds; then release
the key.
Selection keys and the center selection key are used to select a menu option.
To select an option, press the selection key below the menu item on the phone
screen, or press the center selection key for the OK or select options, if shown.
•
•
The scroll key is used to move up, down, left, or right in the menus.
Send and end keys: Press the send key to place a call or to answer an incoming
call. Press the end key to end a call or press and hold to return to the start screen.
7
P h o n e a t
a
g l a n c e
1. Phone at a glance
Earpiece (1)
Main display (2)
Center selection key (3)
Right selection key (4)
Camera key (5)
End/power key (6)
Keypad (7)
Microphone (8)
Clear (CLR) key (9)
Send key (10)
Speaker phone key (11)
Left selection key (12)
Scroll key (13)
Headset jack (1)
Volume keys (2)
Camera key (3)
Charger port (4)
Speaker phone (5)
Charge/activity LED (6)
External display (7)
Camera flash (8)
Camera lens (9)
8
P h o n e a t
a
g l a n c e
■ The standby mode
The start screen is home base and indicates your phone is in the standby mode.
Battery level (1)—Four bars indicate a fully
charged battery.
1X
1
2
6
Location (2)—Location information
sharing mode.
Contacts (3)—Press the right selection key
to select this option.
Message (4)—Press the left selection key
to select this option.
5
4
Message MENU Contacts
3
Menu (5)—Press the center selection key
to select this option.
Signal strength (6)—The strength of the signal received by the phone is indicated
by the number of bars displayed. (Signal strength not shown in standalone mode.)
■ Indicators and icons
Depending on your phone settings and modes, some or all of the following
indicators and icons may appear in the standby mode. See "Phone information,"
p. 48, for instructions on how to display the complete Icon Glossary.
Signal strength indicator. You are in a 1XRTT network.
See "Network services," p. 5.
Signal strength indicator. You are in a digital network.
See "Network services," p. 5.
No service indicator: the phone is not in service.
Battery strength indicator.
Call state indicator: a call is in progress. No icon indicates the
phone is in the standby mode.
Dormant mode: the phone is in a dormant state during a data
call. Your connection is still active.
You are roaming outside your home network.
SSL security feature is on.
TTY is enabled.
9
P h o n e a t
a
g l a n c e
Location information sharing is set to E911 Only.
See ”Security” on page 44 .
Location information sharing is set to Location On.
See ”Security” on page 44 .
Voice privacy is activated.
Sounds are set to off.
Alarm only is on.
Alarm is set to on.
Standalone mode is on.
Speaker phone is set to on.
Vibrate mode is set to on.
A data call is in progress.
A schedule entry is set.
There are new voice mails.
There are new messages in your inbox.
You have missed calls.
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus (Get It Now, Messaging, Contacts, Recent Calls, and Settings &
Tools). Each main menu contains submenus and lists from which you can select
or view items and customize your phone features. To access these submenus,
enter the number associated with the option. You may also use the scroll method.
The left, right, and center selection keys are also called soft keys. The function
associated with the selection keys can change for each phone menu and depends
on each selected feature.
Some features may not be available, depending on your network. Contact Verizon
for more information.
10
P h o n e a t
a
g l a n c e
■ Scroll method
1. In the standby mode, use the left and right selection keys to select Message
or Contacts. To access the main menus, select Menu with the center selection
key, then scroll left or right.
To provide a visual representation of your current position in the menu
structure, a scroll bar may be displayed on the right side of the screen.
2. Press the clear key (CLR) to return to the previous screen except when in a
voice call, creating a TXT message, or in a wireless or Get It Now application.
3. Press the end key to return to the standby mode from any menu or submenu.
■ Scroll key
You can use the scroll key to move up, down, left, and right
through the menu options. Press the center selection key
to select an item.
Depending on how you configure your phone, some or all
of the following menu shortcuts may be available in the
standby mode using the scroll key. See "Shortcut key," p. 43.
Up—Launch browser.
Right—View Get It Now menu.
Down—Go to calendar.
Left—Get PIX.
Press OK—Select highlighted menus and submenus.
11
S e t u p y o u r p h o n e
2. Set up your phone
■ Antenna
Your phone has both an internal
andexternalantenna. The wireless
signal antenna is external and
located toward the top of the
phone. To improve the signal
strength on your phone, extend
the external antenna as far as
possible while in use. An internal
GPS antenna is activated when
you place an emergency call or
when you select Location On
from the Location menu.
See "Security," p. 44.
Hold the phone as you would
any other telephone with the antenna area pointed up and over your shoulder.
As with any other radio transmitting device, do not touch the antenna unnecessarily
when the phone is switched on. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power level than otherwise needed. Not
touching the antenna area during a phone call optimizes the antenna performance
and battery life.
■ Replace the battery
The battery is built into the back cover of your phone.
Note: Always switch the device off, and disconnect the charger before
removing the battery.
12
S e t u p y o u r p h o n e
Remove the back cover
1. With the back of the phone
facing you, slide the release
button up (1).
2. Lift the back cover from the
device (2).
Replace the back cover
1. Set the back cover on the
phone so that the metal tabs
on the battery align with the
tabs in the device.
2. Lower the base of the back
cover onto the phone (1) and
press the top down (2) until
it snaps securely in place.
Important: Do not remove the front cover of this phone. Attempts to
remove the front cover may damage the phone. If your phone requires
service, contact the Nokia Care Contact Center.
Charge the battery
1. Plug the AC-1005U charger transformer into a standard ac outlet.
2. Open the charger slot cover at the bottom
end of the phone (1).
13
S e t u p y o u r p h o n e
3. Insert the charger
output plug into the
charger slot (2).
The charge LED on the front cover of your phone will glow red until charging
is complete. The charge time varies depending on the battery level. The
maximum charge time for a fully discharged, standard battery is
approximately 2 hours, 50 minutes.
■ Turn your phone on or off
To turn your phone on or off, press and hold
the end/power key for at least 3 seconds.
■ Connect the headset
You can connect a compatible headset with a standard 2.5-mm plug into your
phone to allow hands-free operation.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your safety.
1. Open the headset connector port.
2. Plug the headset connector into the 2.5-mm headset jack on the side of
your phone.
14
S e t u p y o u r p h o n e
3. Position the headset on your ear.
With the headset connected, you can make, answer, and end calls as usual.
•
•
•
Use the keypad to enter numbers.
Press the send key to place a call. See "Phone at a glance," p. 8.
Press the end key to end a call.
■ Make a call
To make a call, make sure the phone is turned on. Enter the number you want to
call, and press the send key. See "Contacts," p. 32, to use the contacts menu and
to enter contact numbers. This is a network feature.
Use the keypad
Enter the phone number (including the area code if necessary), and press the
send key. To delete a character to the left of the cursor, press the clear (CLR) key.
Press the end key to end the call. This is a network feature.
Recently dialed numbers
Press the send key once to display the latest numbers dialed, received, or missed.
Press the send key again to dial the last number you dialed, or highlight the number
(or name) you wish to redial, and press the send key. This is a network feature.
Speaker phone
To use the speaker phone when in a call, press
(speaker phone key). To turn
the speaker phone off, press
again. This is a network feature.
Warning: Do not hold the phone near your ear when the speaker phone
is in use, because the volume may be extremely loud.
Headset calls
To answer a call when the headset is connected, press the send key on your phone,
or if included, press the send key on the headset enhancement. If included, use
the volume key on your headset to adjust call volume.
Call a speed dial number
To dial a single-digit speed dial number (2–9), press and hold the number of the
assigned key. To dial a two-digit speed dial number (10–22), use a short press on
the first number, and press and hold the second number. See "Speed Dials," p. 36.
15
S e t u p y o u r p h o n e
Speed dial numbers 97, 98, and 99 are pre-set numbers for Verizon Customer
Service, and are free calls. These three speed dials are:
•
•
•
97—#BAL: the billing balance is displayed or sent in a text message.
98—#MIN: the minutes used are displayed or sent in a text message.
99—#PMT: pay a bill with a one-time payment or other payment options.
■ Answer calls
The following options are available to manage incoming calls. This is a
network feature.
Answer or silence an incoming call
•
•
•
•
To answer a call, open the flip; if the flip is already open, press the send key.
To silence an incoming call, select Quiet or press the end key.
To forward an incoming call to voice mail, select Ignore.
To end a call, press the end key twice.
Adjust the earpiece volume
The volume keys are located on the left side of your phone. To adjust the volume
when in a call, press the volume up key or volume down key. When you adjust the
volume, a bar chart is displayed to indicate volume level.
Caller ID
To display the name of the person calling you, the caller’s identity must be stored
in the contact list. If the caller is not in the contact list, only the phone number is
displayed, or the incoming caller number may be shown as RESTRICTED or
UNAVAILABLE. The date and time when the incoming call arrives is always displayed.
Picture ID
You can assign a picture to display with incoming calls from contacts. See
"Assign picture ID," p. 33.
Silent mode
To turn sounds off, press the volume down key until All Sounds Off is displayed, or
press the end key. To turn sounds back on, press the volume up key until the
desired level is reached.
16
S e t u p y o u r p h o n e
Vibrate mode
To turn vibrate only mode on for your phone and silence all other sounds, press
the volume down key to reduce the volume until Vibrate Only is displayed.
To quickly turn vibrate mode on or off, press and hold the # key.
To turn the vibrate mode on with the ringtone, select Menu > Settings & Tools >
Sounds Settings > Call Sounds > Call Vibrate > On > OK.
Other options during a call
When you are in a call, select Options to access the following options:
Send TXT Msg—Send or retrieve messages.
Contacts—Search your contact list.
Recent Calls—Check recent calls.
Voice Privacy—Protect the privacy of your current phone conversation from other
callers placing phone calls on your same network. Contact Verizon for the
availability of Voice Privacy in your area.
Mute function
When in a call, select Mute to prevent the other party from hearing your voice,
but allow you to hear the other party. Select Unmute to turn off this feature.
17
T e x t e n t r y
3. Text entry
Your phone offers four methods for entering text and numbers: Abc, ABC or abc
(sentence case, uppercase, and lowercase), Word (sentence case, uppercase, and
lowercase), 123, and Symbols. The following rules apply when entering text:
•
•
•
Press CLR to backspace the cursor and delete a character.
Press and hold CLR to backspace continuously and delete up to the last space.
Press # to enter a space, thereby accepting a completed word, when in the
subject or text area of a message or entering a contact or group name.
•
•
Press 1 to enter the symbol mode when in the subject or text area of a message.
Press * to switch between sentence case (the first letter of entries or sentences
is capitalized and the following letters are lower case), uppercase and lowercase
in abc or word modes when in the text area of a message, or entering a contact
or group name.
•
The entry mode selection key (usually the left selection key) displays the
currently selected entry mode (Abc, Word, 123, or Symbols).
■ Abc (multi-tap) mode
In the abc (or multi-tap) mode, to enter a letter, repeatedly press a key until the
letter you want appears.
Activate abc mode
Press the entry mode selection key, and select Abc for sentence case or ABC for
uppercase. Press * to switch among sentence case, uppercase, and lowercase (abc).
Abc mode text entry
Press a key once to insert the first letter on the key, twice for the second letter,
and so on. If you pause briefly, the last letter in the display is accepted, and your
phone awaits the next entry.
■ Word mode
Word mode is a predictive method of text entry using your keypad and the built-
in dictionary to quickly recognize the most commonly used word for a specific
key sequence. Word mode is much faster than the abc method because you only
press the corresponding key on your keypad once for each letter.
18
T e x t e n t r y
Activate word mode
To activate word mode at any text entry screen, press the entry mode selection key,
then select Word. Press * to switch among sentence case, uppercase (WORD), and
lowercase (word).
Word mode text entry
The illustration below simulates your display each time a key is pressed in word mode.
For example, to write "Verizon" with word mode on and the English dictionary
selected, press each of the following keys once:
8
3
7
4
9
6
6
•
•
If a displayed word is not correct, press 0 to view other word options.
If your word does not appear, delete your entry, and press the entry mode
selection key to change the mode to Abc. Reenter your word using the
multi-tap mode.
■ 123 (number) mode
To enter a number in abc or word mode, press and hold the desired number key.
To switch to 123 mode from any other mode, press the entry mode selection key,
and select 123.
■ Symbols mode
To insert special characters into your message, press the entry mode selection
key, and select Symbols. Depending on which screen you are viewing, this may be
either the left or right selection key. To scroll through the list of symbols in abc
mode, press 1 repeatedly.
19
G e t I t N o w
4. Get It Now
Get It Now allows you to download ringtones, news, information, and games. You can
also find information such as the location of restaurants or ATMs. With Get It Now you
can personalize your phone to your own lifestyle and tastes. This is a network feature.
Download charges for Get It Now applications vary and airtime charges apply when
browsing, downloading and using certain applications. Get It Now can be used
anywhere on the Verizon Wireless network, as long as your phone has a digital
signal available. Most applications do not use a network connection while in use.
Your phone must be switched on to use Get It Now. Do not switch the phone on when
wireless phone use is prohibited or when it may cause interference or danger.
This feature shares memory space with other features.
■ Get TUNES & TONES
You can personalize your phone with sounds and ringtones using Get Tunes & Tones.
A large variety of music styles are available, such as current hits, pop, and hip-hop.
This is a network feature.
Select Menu > Get It Now > Get Tunes & Tones and one of the following options:
Get New Ringtones—Select Get New App to download new ringtone applications or
use one of the applications to download ringtones from the Internet. A download
can be set as a Ringtone, a Contact ID for a particular contact, or as an Alert Tone
for calendar entries. New ringtones are stored in the My Ringtones folder.
Subscription and purchase pricing are available.
My Ringtones—Select Get New App. > Get New App to download a new ringtone or
use one of the tones stored in this folder. To apply a ringtone, highlight the tone,
and select Set As > Ringtone, Contact ID, or Alert Tone. Select PLAY to preview the
highlighted ringtone. Select Options > Erase to delete the highlighted ringtone or
Options > Ringtone Info to view file information about the highlighted ringtone.
My Sounds—Select Record New to record sounds such as music or spoken words
or prerecorded sounds such as Happy Birthday and crowd roar. Recorded sounds
can be played back later or can be sent in a PIX message. Select Play to preview
the highlighted sound. Select Options > Erase to delete the highlighted sound
or Options > Sound Info to view file information about the highlighted sound.
20
G e t I t N o w
■ Get PIX
Get PIX allows you to view, take, and send your digital pictures right from your
wireless phone. This is a network feature.
You can take photos with the built-in 310-k pixel camera and flash. The camera
produces photos in JPEG format.
After you take a picture, you can attach it to a PIX message, or set it as wallpaper, or
picture ID for a contact. When you attach a picture to an entry in your list of contacts,
the picture is displayed when the contact calls you. Pictures can be stored in the
My PIX folder or uploaded to PIX Place. See "PIX messaging," p. 24.
Your phone supports image capture resolution from 160x120 to 640x480 pixels.
If there is not enough memory to take a new photo, delete old photos in the
My PIX folder.
Take a picture
To turn on the built-in camera, press the camera key on the keypad or the side of
the phone, or select Menu > Get It Now > Get PIX > Take PIX. Select TAKE to take
a picture or Options to adjust picture Resolution, Self Timer, Flash, Brightness,
White Balance, Shutter Sound, Color Effects, Capture Mode, or Sub Display. After
taking a picture, you can save it to My PIX, send it in a PIX message, upload it to
PIX Place, or erase it.
To zoom in on a picture, press the right scroll key. To zoom out, press the left scroll key.
Warning: Keep a safe distance when using the flash. Do not use on people
or animals at close range. Do not cover the flash while taking a picture.
Other options
The following Get PIX options allow you to download and manage your pictures.
Get New PIX—Select Get New App to download PIX applications, or use one of the
applications to download images from the Internet. Subscription and purchase
pricing are available.
My PIX—Select pictures from your My PIX gallery to send, upload, lock, erase,
modify, get info on, or view. To use a picture, select Options > Set As >
Wallpaper > Main Screen or Front Screen. To protect or unprotect image files
from Erase and Erase All functions, select Options > Lock or Unlock.
PIX Place—Access the online picture album to upload pictures. For more
21
G e t I t N o w
■ Fun and games
To open games from the games gallery or download a new game, select Menu >
Get It Now > Get Fun & Games > Get New App and a game option. Select the game
you want and a payment option, and download the title. You can start using the
application as soon as the download is complete. Subscription and purchase pricing
are available. This is a network feature.
■ News and info
To connect to the Internet and browse for the latest news, stock quotes, movie listings,
and more, select Menu > Get It Now > Get News & Info. This is a network feature.
■ Get going
To browse the Internet for everything you need to know while on the go, such
as the location of a restaurant or the nearest ATM, select Menu > Get It Now >
Get Going > Get New App. This is a network feature.
■ Get extras
To access the Internet for additional Verizon downloads and applications, select
Menu > Get It Now > Get Extras > Get New App. Subscription and purchase pricing
are available. This is a network feature.
■ Incoming calls
While downloading an application, calls are automatically sent to your voice mail,
if available. If you do not have voice mail, downloading is not interrupted by an
incoming call, and the caller receives a busy signal.
When using an application, an incoming call automatically interrupts the application
and allows you to answer the call. When you complete your call, you can resume
using the application.
Make an emergency call while online
You can end your data connection and make an emergency call.
1. To close your connection, press the end key. Press the end key as many times
as needed to clear the display and ready the phone for calls.
2. Enter the emergency number for your present location. Emergency numbers
vary by location.
3. Press the send key.
22
G e t I t N o w
■ Security and functionality
Your phone supports a digital rights management system to protect content that
you have acquired. Content such as ringtones may be protected and associated
with certain usage rules.
Usage rules are defined in the content activation key that can be delivered with
the content or delivered separately. You may be able to update the activation key.
Always check the delivery terms of any content and activation key before acquiring
them, as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringtones),
and other content from being copied, modified, transferred, or forwarded.
Mobile Web 2.0 is a digital network service that is not available everywhere.
Mobile Web text messages and alerts fees apply to sent and received messages.
Airtime charges apply. See "Network services," p. 5.
Your phone may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you must
take the same security or content precautions as you would with any Internet site.
The security icon (
) does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. Verizon secures the data transmission between the gateway and the
content server.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Cache
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while browsing the Internet, select
Menu > Manage Memory > Clear Cache > Clear > Yes.
23
M e s s a g i n g
5. Messaging
If you have subscribed to a message network service, you can send and receive
messages to and from compatible phones that also subscribe to a message service.
You can also send and receive multimedia messages and e-mail. Messaging
features are network services.
Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your phone or PC.
Note: When sending messages, your phone may display MESSAGE SENT.
This is an indication that the message has been sent by your phone to the
message center number programmed into your phone. This is not an
indication that the message has been received at the intended destination.
For messages that fail, the network will create a new error message,
explaining why the message was not delivered. Contact Verizon for
more details about messaging services.
■ TXT messaging
When composing TXT messages (SMS) or enhanced messages (EMS, messages that
can contain graphics, sounds or formatted text), the number of characters used
(out of a maximum per message) appears in the top left corner of the message
screen. Segments are created when the message length exceeds the maximum
allowed number of characters. The number of segments used (out of a maximum
of 7) appears in the top right corner of the message screen. No additional text
can be entered when all segments and characters have been used. Segments are
delivered as individual messages.
The use of special characters takes up more space than standard characters.
E-mail addresses are counted as characters. EMS messages cannot be sent
to e-mail addresses.
For information on entering text into messages, see "Text entry," p. 18.
■ PIX messaging
PIX messages are multimedia (MMS) messages that contain text, sound files,
or image files. Your phone supports PIX messages that are up to 125 KB. If the
maximum size is exceeded, your phone may not be able to receive the message.
Depending upon your network services, you may receive a message that includes
an Internet address where you can go to view the PIX messages.
24
M e s s a g i n g
Images are scaled to fit the display area of the phone. Your phone has a PIX message
viewer for playing messages. Incoming messages reside in the inbox until you
delete or save them. Once you save the PIX message, you can use the image as
wallpaper or use the sound as a ringtone. See "Get PIX," p. 21.
Only compatible devices that offer picture message features can receive and
display PIX messages. The appearance of PIX messages may vary depending
on the receiving device.
Copyright protections may prevent some images, ringtones, and other content
from being copied, modified, transferred, or forwarded.
PIX messaging supports the following formats:
•
•
Picture: JPEG, GIF, animated GIF, BMP, WBMP, and PNG
Sound: MIDI, SP-MIDI, QCELP-13K, and EVRC
If a received message contains unsupported elements, these elements may be
replaced with an alert such as File format not supported.
You can receive multimedia message notification, but cannot receive multimedia
messages if you have a call in progress or other applications running or you are in
an active browsing session. Because delivery of multimedia messages can fail for
a variety of reasons, do not rely solely upon them for essential communications.
Important: Exercise caution when opening messages. Multimedia
harmful to your phone.
■ New messages
To compose a new message, select Message > New Msg > TXT Msg or PIX Msg.
TXT message
To write and send a TXT message, do the following:
1. Select a recipient. To add an existing number or address, select Add >
From Contacts, Groups, or Recent Calls, highlight the recipient, and select
MARK > Done.
You may also use the keypad to manually enter a phone number or e-mail
address in the To: field. Scroll down to the next available address field to enter
each recipient. The default entry mode for the To: field is 123 (number). To
switch to multi-tap mode for e-mail address entry, select 123 > Abc or ABC.
See "Text entry," p. 18.
To add a manual entry to your contact list, select Add > To Contacts.
See "Create new contacts," p. 32.
25
M e s s a g i n g
2. To open the text entry field, select OK.
3. Compose a message using the keypad. See "Text entry," p. 18.
4. To send the message, select SEND.
5. To save the message as a draft, press the end key, and select Yes > OK.
Your message is saved in the Drafts folder.
TXT message options
To customize a new TXT message, select Options when the cursor is in the text
entry field, and select one of the following options:
Save As Draft—Save your message into the Drafts folder.
Add Graphic—Include a graphic icon in your message. EMS messages cannot
be sent to e-mail addresses.
Add Sound—Include a sound in your message. EMS messages cannot be sent to
e-mail addresses.
Add Quick Text—Insert text from the Quick Text gallery into your document.
See the Quick Text option under "All message settings," p. 29.
Cancel Msg—Close out of the message without sending, if a recipient is entered
in the To: field. Select Yes > OK to save the message in the Drafts folder.
PIX message
To compose and send a PIX message, do the following:
1. Select a recipient. To add an existing number or address, select Add > Contacts,
Groups, or Recent Calls, highlight the recipient, and select MARK > Done.
To upload an image to the online picture album, select Add > To PIX Place > OK.
You may also use the keypad to manually enter a phone number or e-mail address
in the address area. Use a space to separate each recipient. The default entry
mode for the To: field is 123 (number). To switch to multi-tap mode for e-mail
address entry, select 123 > Abc or ABC. See "Text entry," p. 18.
To add a manual entry to your contact list, select Add > To Contacts.
See "Create new contacts," p. 32.
2. Select OK or scroll down to open the text entry field.
3. Enter text into the Text: field of the PIX message using the keypad. See "Text
entry," p. 18. When composing PIX messages, the number of characters used (out
of a maximum of 1000 per message) appears in the top left corner of the message
screen. No additional text can be entered when all characters have been used.
26
M e s s a g i n g
4. To add a picture, scroll to PIX:, select My PIX, the desired picture, and OK.
To add a new picture using the built-in camera, select Camera > TAKE > OK.
5. To add a sound file, scroll to Sound:, select Sounds, a recorded sound, and OK.
To record a new sound, select Sounds > Record New. The new sound is added
to the top of the gallery list. Select Play to preview a recorded sound.
6. To add a message title, scroll to Subject:. Enter text (up to 100 characters)
using the keypad.
7. To send the message, select SEND.
8. To save the message as a draft, press the end key, and select Yes > OK.
Your message is saved in the Drafts folder.
PIX message options
To set PIX message options, select Options > Text:, PIX:, Sound:, or Subject:
and from the following:
Preview—View your message (after adding PIX file).
Add Quick Text—Insert text from the Quick Text gallery (in Text: and Subject: only).
Save As Draft—Save your message into the Drafts folder.
Priority Level—To set the priority level, select Normal or High.
Remove PIX—Remove picture from message (if previously added).
Remove Sound—Remove sound file from message (if previously added).
Add Slide—Add a slide to the message.
Cancel Msg—Close out of the message without sending, if a recipient is entered
in the To: field. Select Yes > OK to save the message in the Drafts folder.
■ Inbox
Your phone can receive text messages, enhanced messages, PIX messages, e-mails
using SMS, WAP push messages, and alerts in the inbox. This is a network service.
Upon receiving an incoming message, an alert is displayed. You may open the
message immediately or view it later. Select View Now to open the new message
in the inbox. If you select View Later, the new message notification icon ( ) is
displayed, and you must open the inbox to view new messages. You may receive a
message that includes an Internet address where you can go to view your messages.
To open the inbox and view or edit messages, select Message > Inbox.
If Auto View or Auto Receive are enabled for incoming messages, View Now
and View Later are not displayed. See "Message settings," p. 29.
27
M e s s a g i n g
View the inbox
The number of messages in the inbox is shown in parentheses. When you open
the inbox, the list of messages is displayed. The newest messages are displayed
first. Select a message and Erase > OK to delete the selected message, or select
Options and from the following options:
Reply—Send a TXT Msg or PIX Msg reply.
Reply w. Copy—Send a reply which includes the original message text
(TXT messages only).
Forward—Forward the message to another phone number or e-mail address
or upload the message to PIX Place.
Lock or Unlock—Protect or unprotect the selected message from Erase and
Erase All commands.
Add to Contacts—Save the contact information to the contact list.
Erase Inbox—Delete all messages in your Inbox.
Message Info—Display sender information and timestamp.
View or play messages
To view or play a message in the inbox, select the message and OPEN. If necessary,
scroll up or down to view the whole message. You can scroll left or right to view
the content of the other messages in the inbox.
With the message open, you can select from the following:
Erase—Delete the message (messages without sound files attached only).
Mute or Unmute—Turn on or off the sound of a sound object (messages with sound
files attached only).
REPLY—Send a TXT Msg or PIX Msg reply.
Options—Select from the available options.
■ Sent messages
The Sent folder is used to store TXT and PIX messages that have been delivered
to their recipients. The number of messages stored in the Sent folder is shown
in parentheses. To open the Sent folder, select Message > Sent.
The list of sent messages is displayed. The newest messages are displayed first.
Select a message, and from the following:
Erase—Select Yes > OK to delete the sent message.
Options—Select from the available options.
OPEN—View the message. With the message open, you can select from the
following options:
28
M e s s a g i n g
Erase—Delete the message (messages without sound files attached only).
•
•
Mute or Unmute—Turn on or off the sound of a sound object (messages with
sound files attached only).
•
•
RESEND—Resend the message.
Options—Select from the available options.
■ Draft messages
The drafts folder is used to store drafts of TXT and PIX messages. The number of
messages stored in Drafts is shown in parentheses. To open the drafts folder, select
Message > Drafts. The list of draft messages is displayed. The newest messages are
displayed first. Highlight a message, and select from the available options.
■ Message settings
To configure settings for TXT or PIX messages, select Menu > Messaging >
Settings > All Msg, TXT Msg, or PIX Msg > OK.
All message settings
Select from the following options to apply settings to all messages:
Auto Save—Automatically save all sent messages to the Sent folder. Select On or
Off to enable or disable Auto Save. Select Prompt to receive a prompt to save after
each message is sent.
Auto Erase—Automatically erase the oldest (unlocked) message from your inbox
if it is full. Select On or Off. If Auto Erase is set to Off, a message is displayed
when memory is full prompting you to manually delete unwanted messages from
your inbox.
Quick Text—View and edit Quick Text entries, which are short, prewritten messages
that can be recalled and inserted into a TXT message. The gallery of preloaded and
user-defined Quick Text entries is displayed. To add an entry, select New, enter
the text, and select OK. To erase a Quick Text entry, highlight the entry, and select
Erase > Yes.
Voicemail #—Change the default voice mail speed dialing number. Enter the new
number, and select OK.
Entry Mode—Change the default entry mode for the text entry area in a TXT message
and the text and subject entry areas in PIX messages. Select Word, Abc, ABC, 123,
or Symbols.
Callback #—Change the default callback number that is sent. Enter the new
number, and select OK.
29
M e s s a g i n g
Signature—Create or edit text that will automatically append to each outgoing
TXT and PIX message. Select Custom, enter the signature text, and select OK.
Select None > OK to turn off the Signature function.
TXT message settings
To view the content of a received TXT message, select Auto View > On. The content
of incoming TXT messages is displayed when the phone is in the standby mode.
To create or edit text that automatically appends to each outgoing TXT message,
select Signature. Select Custom, enter the signature text, and select OK. Select
None > OK to turn off the Signature function. A signature for TXT messages
cannot be created if a signature is enabled using the All Msg > Signature menu.
PIX message settings
To download the content of a received PIX message, select Auto Receive > On.
To create or edit text that automatically appends to each outgoing PIX message,
select Signature. Select Custom, enter the signature text, and select OK. Select
None > OK to turn off the Signature function. A signature for PIX messages
cannot be created if a signature is enabled using the All Msg > Signature menu.
■ Message options
To erase TXT or PIX messages, select Message > Options and from the available
options. Messages are permanently deleted.
■ Voice mail messages
Voice mail is a network service that allows you to listen to voice messages recorded
in the voice mailbox. When you have a new voice message, your phone alerts you,
and you are prompted to listen now or listen later. If you select Listen later, the
new voice mail icon (
) is displayed in the standby mode.
Listen to voice mail messages
When you have a new voice message alert, select Listen now > OK to access your
voice mailbox. To reach the voice mail screen to play back existing voice messages,
selectMessage > Voicemail. To access voice mail using speed dial, press and hold 1.
The voice mail screen displays the number of new messages and the date and
time of the last message received. To access your voice mailbox, select Call.
To reset the voice mail counter, select Clear > Yes > OK. The new voice mail icon
will no longer appear on the screen.
30
M e s s a g i n g
The clear voice mail icon option does not delete voice mail from your voice
mailbox. To delete messages, you must access your voice mailbox and use the
voice mail system commands. If you exceed the storage limit for your voice
mailbox, old messages may be overwritten.
■ E-mail messages
To launch the Internet browser and access the e-mail messaging screen, select
Message > E-mail. This is a network service.
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your phone.
■ Mobile instant messaging
To access instant messaging (IM), selectMessage > Mobile IM > Get New App.
This is a network service.
■ Chat
To launch a browser and chat with IM users, selectMessage > Chat.
This is a network service.
31
C o n t a c t s
6. Contacts
You can keep track of contact information in Contacts. Contact names are saved
in Contacts memory and each contact entry can contain multiple phone numbers
and e-mail addresses. Contact entries can be assigned to speed dials, picture IDs,
ringtones, and caller groups.
■ Create new contacts
To add a contact to your contact list, do the following:
1. Select Menu > Contacts > New Contact.
2. Scroll to each field and enter the contact information for any of the following:
Name:—the name of the contact, which is displayed in the contact list. If no name
is entered, the default phone number or address is displayed in the contact list.
Mobile 1:—the primary mobile phone number for the contact. This is the
default number for the contact.
Home:—the home phone number for the contact
Work:—the business phone number for the contact
Email 1:—the primary e-mail address for the contact
Group:—a caller group for the contact. See "Edit caller groups," p. 35.
Picture:—a picture ID for the contact. See "Assign picture ID," p. 33.
Ringtone:—a distinctive ringtone for the caller. See "Add a ringtone," p. 34.
Mobile 2:—the secondary mobile phone number for the contact
Fax:—the fax number for the contact
Email 2:—the secondary e-mail address for the contact
3. Select SAVE.
To create a new contact, enter a phone number for the new contact in the
standby mode. To save the new number to your contact list, select Save > Create
New > Mobile 1, Mobile 2, Home, Work, or Fax entry. Enter a name for the new
contact and any additional contact information, and select SAVE. If no name is
entered, the default phone number or address is displayed in the contact list.
Change the default number
The default number is the contact number that is called when you dial by contact
name. To change the default number when multiple numbers are assigned to a
single contact, do the following:
32
C o n t a c t s
1. Select Contacts, the contact you wish to modify, and Edit.
2. Highlight the Mobile 1, Home, Work, Mobile 2, or Fax number you wish to set as
the default number, and select Options > Set As Default OK >Yes > OK > SAVE.
Set up phone numbers with pauses
Pause codes instruct the receiving system to pause or wait before entering the
numbers that follow them in the dialing string.
To add pause codes to a new phone number, do the following:
1. Enter the number, and select Options and one of the following options:
2-Sec Pause—to dial the contact number, pause for 2 seconds, and dial
a secondary number or extension. "P" appears in the dialing string. You can
enter as many pauses as you need to accommodate the timing on automated
answering services.
Wait—to dial the contact number and wait for you to select Release before
sending a secondary number. The secondary number can be entered as part of
the dial string or it can be entered manually. "W" appears in the dialing string.
2. Select Save > Create New to add a new contact that includes the new number
or Update Existing to modify an existing contact.
To add pause codes to phone numbers in contact list entries, do the following:
1. Select Contacts, highlight the contact you wish to modify, and select Edit.
2. Highlight the number you wish to modify, and select Options > Add Pause >
Wait or 2-Sec Pause > OK > SAVE.
Assign picture ID
You can set picture ID to display the picture of a caller from your contact list
when your phone rings. To assign a picture ID to a contact, do the following:
1. Select Contacts, the contact you wish to modify, and Edit.
2. Scroll to the Picture: field, and select Set. The camera is automatically
enabled if My PIX is empty.
3. Highlight an existing image from My PIX, and select OK to use the image
as the picture ID for the contact.
4. To take a new picture with the built-in camera, select Options > Take New
PIX. To download an image from the Internet, select Options > Get New >
Get New App.
5. Select SAVE to save the changes to the contact.
33
C o n t a c t s
Add a ringtone
You can add a distinctive ringtone to distinguish which contact is calling your
phone. To assign a ringtone to a contact:
1. Select Contacts, the contact you wish to modify, and Edit.
2. Scroll to the Ringtone: field, and select Set.
3. Highlight an existing ringtone from your MY RINGTONES gallery and select
OK to use the ringtone for the contact. Select Play to preview the ringtone.
4. To download and use a new ringtone from the Internet, select
Get New App. > Get New App when in the MY RINGTONES gallery.
Set up voice dial
Your phone uses voice activated dialing to call phone numbers in your contact
list entries. See "Voice services," p. 46.
■ Contact list
The contact list can hold up to 500 contacts. The amount of numbers, addresses,
and contact information that you can save may vary, depending on length and
the total number of entries in the contact list.
Access the contact list
selection key. To quickly find a contact in your contact list, enter the first letter
of the contact name in the Search field, and that portion of the list is displayed.
To call the highlighted contact, press the send key. When you select a contact
name, the default number associated with the contact is used unless you select
another number.
View or edit the contact list
To edit a contact list entry, select Contacts, a contact list entry, and Edit.
See "Create new contacts," p. 32 for editing options.
To view contact information, select Contacts, highlight a contact list entry, and
select VIEW. Numbers, e-mail addresses, and groups are displayed for the contact
list entry. Select from the following options:
Erase—Delete the contact list entry.
EDIT—Modify the information for the contact list entry. See "Create new
contacts," p. 32 for editing options.
Options—Select a number or e-mail address and Send TXT Msg, Send PIX Msg,
or Call (except e-mail addresses). These are network services.
34
C o n t a c t s
Contact list options
The following Options are available from the CONTACT LIST screen:
New Contact—Create a new contact list entry.
Erase—Delete the contact list entry.
Send TXT Msg—Send the contact a text message. This is a network service.
Send PIX Msg—Send the contact a picture message. This is a network service.
Call—Dial the contact. This is a network service.
Erase All—Delete all contact list entries.
■ Groups
You can add contact list entries to up to 30 caller groups and send messages to
everyone in a group. To reach the GROUPS screen, select Menu > Contacts >
Groups > OK. The default caller groups are Family and Work, but new caller
groups can be created.
A contact can only be associated with one caller group at a time. If you add a contact
from one group to another group, that contact is removed from the first group.
Create a new caller group
SelectMenu > Contacts > Groups > New, enter the new group name, and select SAVE.
See "Add contacts to groups," p. 35.
Edit caller groups
Once created, caller groups can be updated with new contacts, renamed, or erased.
The default caller groups cannot be renamed or erased.
Add contacts to groups
Caller groups can be populated in multiple ways. You can update caller groups
by assigning contact list entries to the groups.
1. To add contacts to a group, from the GROUPS screen, highlight a group from
the list, and select VIEW > ADD or Options > Add > OK.
2. For each contact, select MARK > Done.
To edit individual contact list entries, add them to caller groups.
1. Select Contacts, the contact you wish to add to a group, and Edit.
2. Scroll to the Group field, and select Set.
3. Highlight an existing group from the list of group names, and select OK to add
the contact to the group.
35
C o n t a c t s
4. To create a new group, select New, enter the new group name, and select SAVE.
To add the contact to the group, highlight the new group from the list of group
names, and select OK.
A contact can only be associated with one caller group at a time.
Rename a group
When a caller group is created, it can be quickly and easily renamed. From the
GROUPS screen, highlight the group you wish to rename, and select Options >
Rename. Edit the caller group name, and select SAVE.
Erase a group
To erase a group you have created from the GROUPS screen, highlight the group,
and select Options > Erase > Yes > OK. The contacts associated with the group
are not erased.
Send a group message
To send a message to a group, select Menu > Contacts > Groups, the group name,
and Options > Send TXT Msg or Send PIX Msg. Create the message you want to send
to the group, and select SEND. See "New messages," p. 25. This is a network service.
■ Speed Dials
You can associate any mobile, home, or work entry in the contact list with a speed
dial key from 2 to 22. Speed dial key 1 is used to access voice mail. This is a
network service.
Speed dial numbers 97, 98, and 99 are pre-set numbers for Verizon Customer
Service, and are free calls. These three speed dials are:
•
•
•
97—#BAL: the billing balance is displayed or sent in a text message.
98—#MIN: the minutes used are displayed or sent in a text message.
99—#PMT: pay a bill with a one-time payment or other payment options.
In order to use speed dials, you must first turn on the One Touch Dial feature.
See "One-touch dial," p. 46.
Set up speed dialing
1. Select Menu > Contacts > Speed Dials.
2. Scroll to an Unassigned speed dial slot, and select SET.
3. Highlight the contact you want assigned to the selected speed dial slot.
4. Select OK, highlight the mobile, home, or work number you want to assign,
and select OK.
36
C o n t a c t s
To assign speed dial numbers, edit contact information. Select Contacts, the contact
you wish to modify, and Edit. Highlight the mobile, home, or work number you want
to assign to a speed dial slot, and select Options > Set Speed Dial. Scroll to an
Unassigned speed dial slot, and select SET.
Edit speed dial numbers
1. Select Menu > Contacts > Speed Dials.
2. Scroll to an assigned speed dial slot, and select SET.
3. Select Yes > OK to overwrite the existing speed dial number. Highlight the
contact you want assigned to the selected speed dial slot, and select OK.
4. Highlight the new mobile, home, or work number you want to assign, and
select OK.
Delete speed dial numbers
Select Menu > Contacts > Speed Dials, an assigned speed dial slot, and
Remove > Yes > OK.
37
R e c e n t c a l l s
7. Recent calls
Information about calls missed, received, or dialed is stored in the Recent Calls
menu. When the number of calls exceeds the maximum, the most recent call
replaces the oldest.
■ View calls
To view calls, select Menu > Recent Calls > Missed, Received, or Dialed. Select All to
view all missed, received, and dialed calls. The calls are listed by most recent first.
Missed calls are calls that are not answered. The missed calls feature does not
function when your phone is switched off.
When viewing the call lists, the following options are available:
Message—Send the selected number a TXT Msg or PIX Msg. See "New messages,"
p. 25. This option is not shown for unavailable or voice mail numbers in the call lists.
OPEN—View call details.
Select Options for further call list options.
■ View call timers
You can view the total number of calls, duration (hh:mm) of calls, and the data
transfer information with the View Timers option.
Note: Some timers, including the lifetime call timer, may be reset during
service or software upgrades. The actual time invoiced for calls and
services by Verizon may vary, depending on network features, rounding
off for billing, taxes, and so forth.
Select Menu > Recent Calls > View Timers, and scroll to view the call duration data.
Reset call timers
To reset a selected call or data timer or to reset all timers to zero (except
Lifetime Calls and Lifetime Data Count), do the following:
Select Menu > Recent Calls > View Timers, and highlight the timer you wish to
modify. To reset the selected call or data timer to zero, select Reset > Yes > OK.
To reset all timers (except Lifetime Calls and Lifetime Data Count), select Reset
All > Yes > OK.
38
S e t t i n g s a n d t o o l s
8. Settings and tools
Use the Settings & Tools menu to customize your phone and to use your phone as an
organizer and personal digital assistant.
■ My account
The Verizon My Account Web portal allows you to access your account information.
Select Menu > Settings & Tools > My Account. This is a network service.
■ Tools
To access the calculator, calendar, alarm and world clocks, notepad, and stopwatch,
select Menu > Settings & Tools > Tools.
Calculator
To perform simple mathematical calculations using your phone, select Menu >
Settings & Tools > Tools > Calculator.
•
•
Use the keypad to enter numbers.
Use the scroll key to add (up), subtract (down), multiply (right), or divide (left)
values. Press the center selection key (equals) to solve your equation.
•
•
•
Select Operator to use parentheses in your equation or to enter an
exponent (Power).
Press the CLR key to delete a keystroke, or select Clear to cancel your
calculation and clear the screen.
Press # to switch a value to positive or negative, and press * to enter
a decimal point.
Note: This calculator has limited accuracy and is designed for
simple calculations.
Calendar
The calendar allows you to document your agenda and keep it convenient and
easy to access. You can schedule events into the calendar and set your phone to
alert you with a reminder. Select Menu > Settings & Tools > Tools > Calendar and
one of the following:
Add—Create a new event.
VIEW—View the highlighted date.
39
S e t t i n g s a n d t o o l s
Select Options > Add (create a new event), Go To Date (enter a specific date using
the keypad), Erase Passed (delete past events), or Erase All (delete all events on
your calendar).
Schedule a new event
To enter a new event in your calendar, do the following:
1. Select Menu > Settings & Tools > Tools > Calendar, the event date, and Add.
2. Highlight and edit the event entry fields you wish to complete, and select SAVE.
Update an existing event
To update an event in your calendar, do the following:
1. Select Menu > Settings & Tools > Tools > Calendar, the event date, and VIEW.
2. Highlight the event entry you wish to modify and select VIEW > EDIT.
3. Highlight and edit the event entry fields you wish to update, and select SAVE.
4. To delete the selected event, select Erase > Yes > OK.
Alarm clock
Your phone must be turned on to use the alarm feature. To set one of three
alarms, do the following:
1. Select Menu > Settings & Tools > Tools > Alarm Clock > Alarm 1, Alarm 2,
or Alarm 3.
2. Scroll left or right to turn the alarm mode on.
3. Highlight the Time field, and set the alarm time using the keypad and scroll key.
4. To set how often the alarm will occur (Once, Daily, Mon - Fri, Weekends),
highlight the Frequency field, and scroll left or right.
5. To choose an alarm ringtone, highlight the Ringer field, and select Set.
6. Select SAVE. When an alarm is set,
is displayed in the standby mode.
To turn an alarm off, select Menu > Settings & Tools > Tools > Alarm Clock.
Highlight the alarm you wish to modify and select OK > Off > SAVE.
When an alarm time is reached, the alarm tone sounds and/or vibrates (depending on
the alarm settings). Select Snooze to turn the alarm off and have it sound again after
10 minutes. Select Dismiss to turn off the occurrence of the alarm.
World clock
To determine the current time in another time zone or country, select Menu >
Settings & Tools > Tools > World Clock. Scroll to move the indicators over the world
map. The local time is displayed below the city name. Select DST to turn Daylight
Savings Time on or off for the selected city. Select Cities to view a text list of cities.
40
S e t t i n g s a n d t o o l s
Notepad
To create a note, select Menu > Settings & Tools > Tools > Notepad > New, enter
your note text (see "Text entry," p. 18), and select SAVE. To view or edit a note,
highlight the note, and select VIEW > Edit. To delete one note or all notes, select
Notepad > Options > Erase or Erase All.
Stop watch
The stop watch can be used for elapsed time measurement, such as for a sporting
event. Up to six events or records can be timed simultaneously.
The stop watch accuracy is not the same as that of a professional instrument.
Therefore, Nokia advises against its use for official competitions or any other event
in which a high-precision device would be required to establish exact times.
To time a single event, select Menu > Settings & Tools > Tools > Stop Watch > Start.
The elapsed time is displayed in h:mm:ss:ms format. To stop or pause the stop watch,
select Stop. To resume the stop watch from the stopped time, select Start again. To
reset the stop watch to zero, select Reset with the watch in stopped mode.
To time multiple events, select Menu > Settings & Tools > Tools > Stop Watch >
Start. To mark the elapsed time for each event you are measuring, select Cont
(up to six times). To display the event times, select View.
■ Sounds settings
To adjust volumes and assign sounds to phone calls and alarms, select Menu >
Settings & Tools > Sounds Settings and from the following options:
Master Volume—Use the volume keys or scroll key to change the volume setting
of your phone from High to Low or to Alarm Only or Vibrate Only, then select OK.
To silence the phone, scroll down, or press and hold the volume down key until
All Sounds Off is displayed. To preview the sound level, select Play.
Call Sounds—To set ringtones for incoming calls, select Call Ringtone. To set the
phone to vibrate when a call is received, select Call Vibrate > On.
Alert Sounds—Select the alert type (Tone, Vibrate, or Reminder) for an incoming
TXT Message, PIX Message, or Voicemail Msg.
Keypad Volume—Use the volume keys or scroll key to set the keypad volume from
Off to High.
Earpiece Volume—Use the volume keys or scroll key to set the earpiece volume
from Low to High.
Service Alerts—Set any of the alert options to On or Off:
41
S e t t i n g s a n d t o o l s
•
ERI—Enhanced roaming indicator (ERI) alerts you to the status of cellular
service. The ERI banner text displays “Verizon Network,” “Extended Network,”
or “Roaming.” See "Banner," p. 42. This is a network service.
•
•
Minute Beep—to sound an alert every minute while in a call
Call Connect—to alert you when a call is successfully connected
Power On/Off—Enable or disable tones when your phone is turned on or off.
Alarm Sounds—To set a tone for alarms, select Alarm Tone. To get new tones for
alarms, select Get New App. To set the phone to vibrate when an alarm time is
reached, select Alarm Vibrate > On.
■ Display settings
To modify the look and feel of the phone display, select Menu >
Settings & Tools > Display Settings.
Banner
To display a text banner on the standby mode screen, select Menu >
Settings & Tools > Display Settings > Banner and from the following banners:
Personal—Enter your own banner text of up to 16 characters.
ERI Banner—Display ERI text under your personal banner, alerting you to the
current cellular status. This is a network service.
Backlight
To conserve battery life, you can set the phone backlighting to dim when idle.
To set the backlight duration, select Menu > Settings & Tools > Display Settings >
Backlight and select from the following options:
Display—Set how long the main display backlight remains on before dimming.
Keypad—Set how long the keypad remains backlit before dimming.
Contrast
To set the display contrast of your phone, select Menu > Settings & Tools > Display
Settings > Contrast. Select Main LCD to set the main display contrast or Front LCD
to set the external display contrast. Select from one of five contrast levels.
Wallpaper
To set your phone to display a background picture (wallpaper), select Menu >
Settings & Tools > Display Settings > Wallpaper > Main Screen or Front Screen.
42
S e t t i n g s a n d t o o l s
Highlight the image you wish to set as wallpaper, and select OK. Select View to
preview an image as wallpaper and Thumbs to return to thumbnail view. Wallpaper
images can be used from your My PIX folder, or you can select Get New to browse
for a new wallpaper image.
Display themes
To choose the color of the background screen, select Menu > Settings & Tools >
Display Settings > Display Themes > Default, Business, Tropical, or Blue.
Clock format
To set the clock format on your phone’s main display or external display, select
Menu > Settings & Tools > Display Settings > Clock Format > Main Clock or
Front Clock > Digital, Analog, Minimize (external display only), or Off.
■ Phone settings
To designate specific network settings and operational modes for your phone,
select Menu > Settings & Tools > Phone Settings.
Location
To turn on Location or E911, select Menu > Settings & Tools > Phone Settings >
Location and choose Location On or E911 Only.
Standalone mode
To turn off radio frequencies, as in airplane mode, select Menu > Settings & Tools >
Phone Settings > Standalone Mode > On.
Shortcut key
You can assign menu shortcuts on the scroll key to your favorite or most frequently
used functions. The shortcut is activated when you press the scroll key while in
the standby mode. See "Scroll key," p. 11 for the default shortcuts.
1. Select Menu > Settings & Tools > Phone Settings > Set Shortcut Key.
2. To modify a shortcut key, select Left Key, Up Key, Right Key, or Down Key > OK.
3. Highlight the function you wish to assign as a shortcut, and select OK.
4. To reset the scroll key shortcuts to the default settings, select Reset All > Yes > OK.
Language
To set the default language of your phone menu and displays, select Menu >
Settings & Tools > Phone Settings > Language > English or Spanish.
43
S e t t i n g s a n d t o o l s
Security
To secure the phone electronically, select Menu > Settings & Tools > Phone
Settings > Security. This feature protects your phone from unauthorized
outgoing calls or unauthorized access to information stored in the phone.
Enter your lock code (0000 or the last four digits of your phone number), and
select from the following options:
Lock Mode—to prevent others from using your phone or changing location settings
•
To turn the phone lock on, off, or on when the phone is first switched on,
select Device > Lock, Unlock, or On Power Up > OK. When device lock is on for
the phone, you must input your phone lock code to use the phone. To cancel
Lock Mode, select Unlock, and enter your lock code.
When Device lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your phone. The phone will remain
locked even if the phone is switched off and switched back on again.
•
To share position information over the network, select Location. Select
Location On to make position information continually available or select
E911 Only to make this information available for emergency services only.
For calls to emergency numbers, location information may be used by the
emergency operator to determine the position of the phone. The functionality
and accuracy of this feature are dependent on the network, satellite systems,
and the agency receiving the information. This feature may not function in all
areas or at all times.
Edit Code—to change the lock code for the phone. Enter matching four-digit lock
codes in the New Code and Confirm Code entry areas, and select OK.
System select
To set your phone to roam or search for another network when you are not in
your home area, select Menu > Settings & Tools > Phone Settings > System Select
and one of the following options:
Automatic B or Automatic A—Search for service in another network. The roaming
rate applies when you are not in the home service area.
Home Only—Make and receive calls in your home area only.
44
S e t t i n g s a n d t o o l s
Number assignment modules
If your phone is registered with two phone numbers using number assignment
modules (NAM) (for example, work and personal numbers), you can choose which
number to use as your origination number. Select Menu > Settings & Tools >
Phone Settings > NAM Selection. To have your phone automatically switch to the
proper NAM, select Auto NAM > On. To manually choose the origination number,
select Change NAM.
■ Call settings
To designate how your phone handles incoming and outgoing calls, select
Call Settings.
Answer options
To determine how calls may be answered on your phone, select Menu > Settings
& Tools > Call Settings > Answer Options and one of the following:
Flip Open—Answer the call when the flip is opened.
Any Key—Answer the call by pressing any key on the keypad.
Send Only—Answer the call by pressing only the send key.
Auto Answer—Answer the call automatically in about 5 seconds. If the flip is closed,
Auto Answer mode is not activated except when a headset or hands-free car kit
is attached to the phone.
Auto retry
To set the length of time the phone waits before automatically redialing a number
when the attempted call fails, select Menu > Settings & Tools > Call Settings >
Auto Retry > Off, Every 3 Seconds, Every 5 Seconds, Every 7 Seconds, or Every
10 Seconds. Occasionally, your network may experience heavy traffic resulting
in a fast busy signal when you dial. With automatic retry activated, your phone
redials the number (the number of times is specified by the network) and notifies
you once the network is available.
TTY mode
A phone with TTY/TDD (teletype/telecommunication device for the Deaf) support
is able to translate typed characters to voice. Voice can also be translated into
characters and displayed on the TTY. To attach a TTY enabling you to communicate
with parties also using a TTY device, select Menu > Settings & Tools > Call Settings >
TTY Mode and one of the following:
TTY Full—Turn on full TTY capability.
45
S e t t i n g s a n d t o o l s
TTY + TALK—Turn on TTY in voice carry-over (VCO) mode.
TTY + HEAR—Turn on TTY in hearing carry-over (HCO) mode.
TTY Off—Turn off TTY mode.
One-touch dial
To initiate a speed dial call by entering the speed dial digits, select Menu > Settings
& Tools > Call Settings > One Touch Dial > On or Off. If set to Off, speed dial
numbers designated in your contact list do not function. See "Speed Dials," p. 36.
Voice privacy
To set the voice privacy feature for CDMA calls, select Menu > Settings & Tools >
Call Settings > Voice Privacy > On or Off. The voice privacy feature protects the
privacy of your current phone conversation from other callers placing phone calls
on your same network. CDMA offers inherent voice privacy that protects the
identity of users and makes interception very difficult. This is a network service.
Voice services
Before using voice services, note the following:
•
Voice tags are not language-dependent. They are dependent on the
speaker’s voice.
•
•
You must say the name exactly as you said it when you recorded it.
Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
•
•
Voice tag recording prompts are turned off when your phone is in All Sounds
Off mode.
Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
To access the voice services available with your phone, select Menu >
Settings & Tools > Call Settings > Voice Services and one of the available options.
Voice Dial
To call a person in your contact list by speaking their name into your phone, select
Voice Dial. To create a voice dial, select New, and highlight or search for a contact.
Choose the number for the contact that will be voice dialed, and select OK. To record
a voice dial for the contact, select OK, and follow the phone prompts "Name please"
and "Again." You will hear "Added," and the contact is added to the voice dial list.
46
S e t t i n g s a n d t o o l s
In the voice dial list, highlight a voice dial entry, and select PLAY to hear the voice
dial recording, or select from the available options.
Voice Setting
To activate the voice dial function, and set the voice dial activation mode, select
Voice Setting. To activate voice dialing and set the mode, use the scroll key to
change the Set Active mode from Off to Send Key (you are prompted for a voice
dial when you press and hold the speaker key) or Active Flip (you are prompted for
a voice dial when you flip open the phone).
To enable hands-free kit mode, use the scroll key to change the HFK Mode from
Off to On.
Train Words
To use your voice to enable voice services to recognize how you pronounce control
words, select Train Words. Highlight "Yes", "No", or "Wake-up" and follow the
prompts. You hear "Training successful" when complete. Highlight a word, and
select Undo > Yes to undo the word training or Undo Train All to undo all control
word training. When you use Voice Dial, you must pronounce the control words
exactly as you recorded them in order for your phone to understand your commands.
DTMF tones
DTMF tones or touch tones are the tones that sound when you press the keys on your
phone keypad. You can use touch tones for many automated dial-up services such
as banking and airlines or for entering your voice mailbox number and password.
To set the key tone length, select Menu > Settings & Tools > Call Settings >
DTMF Tones. Select Normal to send out a tone for a fixed period of time no matter
how long you press the key or Long to send out a continuous tone for as long as
you keep the key pressed.
■ Memory
To check the amount of phone memory you are using for PIX and sound file storage,
select Menu > Settings & Tools > Memory, and one of the following options:
Memory Usage—To display the total used and available memory (MB).
My PIX—To display the size (KB) of the PIX files stored in My PIX. To delete PIX
files, select Erase, the files you wish to delete, and MARK or Mark All.
Select Done > Yes > OK.
My Sounds—To display the size (KB) of the sound files stored in the My Sounds
folder. To delete sound files, select Erase, the files you wish to delete, and MARK
or Mark All. Select Done > Yes > OK.
47
S e t t i n g s a n d t o o l s
■ Phone information
To view information about your phone, select Menu > Settings & Tools >
Phone Info to display the following information:
My Number—The active MDN and MIN phone numbers, and the network carrier
name. The MDN phone number is the number used to receive calls.
SW Version—The current version of your phone’s software components.
Icon Glossary—The library of screen icons shown while in a call or when using features.
48
E n h a n c e m e n t s
9. Enhancements
Check the model number of any charger before use
with this phone. This phone is intended for use when
supplied with power from charger AC-1005U for the
BL-5002C battery.
Warning: Use only batteries, chargers and enhancements approved
by Nokia for use with this particular model. The use of any other types
may invalidate any approval or warranty, and may be dangerous. For
availability of approved enhancements, please check with your dealer.
A few practical rules about accessories and enhancements:
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
Power
•
•
1100 mAh Li-Ion Battery (BL-5002C)
Travel Charger (AC-1005U)
49
R e f e r e n c e i n f o r m a t i o n
10. Reference information
This chapter contains safety and maintenance information and specifications
for your product.
■ Battery information
For battery installation and replacement information, see "Replace the battery," p. 12.
Your phone is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will eventually
wear out. When the talk and standby times are noticeably shorter than normal,
buy a new battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this phone.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger
then disconnect and reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the phone when not in use. Do not
leave the battery connected to a charger. Overcharging may shorten its lifetime.
If left unused, a fully charged battery will lose its charge over time. Temperature
extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when
a metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 59°F and 77°F (15°C and 25°C). A phone with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
50
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your phone is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage and enjoy your phone for many years.
•
Keep the phone and all of its parts and accessories out of the reach of
small children.
•
Keep the phone dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits. If your phone does
get wet, remove the battery and allow the phone to dry completely before
replacing it.
•
•
•
Do not use or store the phone in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the phone in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the phone in cold areas. When the phone returns to its normal
temperature, moisture can form inside the phone and damage electronic
circuit boards.
•
•
Do not attempt to open the phone other than as instructed in this guide.
Do not drop, knock, or shake the phone. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the phone.
Do not paint the phone. Paint can clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the phone and may
violate regulations governing radio devices.
•
Use chargers indoors.
All of the above suggestions apply equally to your phone, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
51
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
■ Operating environment
Your phone and its enhancements may contain small parts. Keep them out of the
reach of small children.
Remember to follow any special regulations in force in any area and always switch
off your phone when its use is prohibited or when it may cause interference or
danger. Use the phone only in its normal operating positions. This phone meets RF
exposure guidelines when used either in the normal use position against the ear or
when positioned at least 20 millimeters (4/5 inch) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it should not contain metal
and should position the phone the above-stated distance from your body.
In order to transmit data files or messages, this phone requires a good quality
connection to the network. In some cases, transmission of data files or messages
may be delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your phone in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless device or phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. To minimize the potential
for interference, persons with pacemakers should:
•
Always keep the phone more than 15.3 centimeters (6 inches) from
their pacemaker.
•
Not carry the phone in a breast pocket.
52
A d d i t i o n a l s a f e t y i n f o r m a t i o n
•
Hold the phone to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your phone and move the phone away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference
occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the phone, or install the phone in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the phone. Check regularly that all wireless phone
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the phone, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
FCC regulations prohibit using your wireless phone while in the air. The use
of wireless telephones in an aircraft may be dangerous to the operation of
the aircraft, disrupt the wireless telephone network, and may be illegal.
■ Potentially explosive environments
Switch off your phone when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in such
areas could cause an explosion or fire resulting in bodily injury or even death. Switch
off the phone at refueling points such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage, and distribution
areas, chemical plants or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always clearly marked. They
include below deck on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or butane), and areas where the air
contains chemicals or particles such as grain, dust or metal powders.
53
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Failure to observe these instructions may lead to suspension or denial of telephone
services to the offender, legal action, or both.
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call, make sure your phone is properly charged before
attempting any emergency calls. If your battery becomes empty, you cannot
receive or make calls, including emergency calls and must wait a few minutes
after the charging begins to place your call.
1. Press the end key as many times as needed to clear the display and ready
the phone for calls.
2. Enter the official emergency number for your present location and press
the send key. Emergency numbers vary by location.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider for
more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless phone may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
54
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific organization ICNIRP
and include safety margins designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP guidelines
is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with the device transmitting at its
highest certified power level in all tested frequency bands. The actual SAR level
of an operating device can be below the maximum value because the device is
designed to use only the power required to reach the network. That amount changes
depending on a number of factors such as how close you are to a network base
station. The highest SAR value under the ICNIRP guidelines for use of the device
at the ear is 0.83 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under product
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.25 W/kg and when properly worn
on the body is 1.10 W/kg. Information about this device model can be found
system using FCC ID QMNRM-214.
■ Hearing aid compatibility (HAC)
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The M-value,
shown on the device box, refers to lower radio frequency (RF) emissions. A higher
M-value generally indicates that a device model has a lower RF emissions level,
which may improve the likelihood that the device will operate with certain hearing
aids. Some hearing aids are more immune than others are to interference. Please
consult your hearing health professional to determine the M-rating of your
hearing aid and whether your hearing aid will work with this device. More
55
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Technical information
Type designation—RM-214
Dimensions—Width, 45 mm; length, 86 mm; depth, 19.8 mm
Weight—94 g with 1100 mAh Li-Ion Battery (BL-5002C)
Main Display—1.5-in., 128x128 pixels, 262,000 colors
Mini Display—1.0-in., 96x64 pixels, 65,000 colors
Camera—Integrated 330 Kpixels with 4X digital zoom and flash
Wireless networks—CDMA 800 and 1900 MHz, and CDMA2000 1xRTT
Frequency range (Tx)—PCS: 1851.25–1908.75 MHz; cellular: 824.70-848.37 MHz
Frequency range (Rx)—PCS: 1931.25–1988.75 MHz; cellular: 869.70–893.37 MHz
GPS frequency—1575.42 MHz
■ Battery information
This section provides information about battery charging times with the travel
charger, talk-times, and standby times. Be aware that the information in this
section is subject to change. For more information, contact your service provider.
Charging time
The following charging time is approximate with the BL-5002C 1100 mAh
Li-Ion battery:
Travel Charger: Up to 4 hours
Talk and standby times
Operation times vary and depend on signal strength, phone use, network
conditions, features used, battery age and condition (including charging habits),
temperatures to which the battery is exposed, and many other factors.
56
Index
voice privacy 46
voice services 46
call timers 38
caller
group 35
ID 16
calls
A
Abc mode 18
about your phone 5
accessibility 6
account information 39
alarm
clock 40
sounds 42
answering 16
headset 15
in-call options 17
making 15
muting 17
pauses when making 33
silencing 16
alerts 27
answer options 45
antenna 12
B
back cover, removing 13
backlight 42
banner 42
battery
vibrate mode 17
camera 21
care and maintenance 51
certification information (SAR) 55
charger
changing 12
chargers 50
charging 13
charging time 56
information 56
removing 13
connecting 13
information 50
times 56
talk and standby times 56
billing 7, 38
chat messages 31
clock 43
contact information 6
contact list 34
contacts
C
calculator 39
calendar 39
default number 32
new 32
numbers with pauses 33
voice dial 34
call log 38
call settings
answer options 45
auto retry 45
DTMF tones 47
one-touch dial 46
TTY mode 45
contrast settings 42
copyright protection 23
customer service 6, 7
57
I n d e x
D
G
default number
callback 29
games 22
Get Extras 22
Get Fun & Games 22
Get Going 22
Get It Now 20
Get News & Info 22
Get PIX 21
contacts 32
device information 48
dimensions 56
display
backlight 42
banner 42
contrast 42
Get Tunes & Tones 20
groups 35
themes 43
wallpaper 42
downloading
extras 22
H
hearing aid compatibility 55
hearing aids 53
help 6
games 22
information 22
pictures 21
videos 21
I
drafts 29, 30
DTMF tones 47
duration of calls 38
Inbox
erase messages 30
inbox 27, 28
indicators and icons 9, 48
instant messages 31
E
edit message 26
e-mail 31
L
emergency calls 54
location sharing 44
while using wireless Internet 22
EMS 27
enhanced roaming indicator 42
enhancements 49
entry mode 19, 29
erase messages 30
ERI 42
language 43
location sharing 44
lock code 44
loudspeaker 15
M
master volume 41
medical devices
hearing aids 53
pacemakers 52
memory information 47
message
ESN 6
event scheduler 40
F
options 27, 28, 30
reply 28
FCC information 55
58
segments 24
settings 29
size 24
inbox 28
message 30
PIX message 21
sent message 28
messages
characters in 26
chat 31
composing 25, 26
draft 29
e-mail 31
P
pacemakers 52
pauses 33
EMS 24, 27
erasing 30
inbox 27
MMS 24, 27
mobile IM 31
options for 28
Quick Text 29
sent 28
phone
lock 44
settings 43
setup 12
picture
gallery 21
ID 33
taking 21
SMS 27
text 24
voice mail 30
pictures 21
PIX & FLIX messages 24
PIX messages
formats 25
settings 30
powering on/off 14
MMS 27
mobile IM 31
multi-tap mode 18
mute function 17, 29
my account 39
Q
Quick Text 29
N
NAM selection 45
network
R
recent calls 38
services 5
settings 43
news & info 22
Nokia support 6
notepad 41
recordings 20
redialing 45
reference information 50
reply to messages 28
ringtones 20
number mode 19
S
O
safety 4, 52
scroll key 11
scrolling 11
one-touch dial settings 46
options
contact list 35
59
I n d e x
security 23, 44
selection keys 10
sent messages 28, 30
settings 29
themes 43
timers 38
tools & settings 39
touch tones 47
TTY mode 45
phone 43
sounds 41
turn phone off/on 14
TXT messages
characters 24
edit 26
settings & tools 39
shortcut key 43
shortcuts 11
signature 30
silent mode 16
SMS 27
write and send 25
type designation 56
software version 48
sound settings 41
sounds
U
usage rules 23
alert 41
V
PIX message 27
supported formats 25
speaker phone 15
speed dials 15, 36
standalone mode 43
standard mode 18
standby mode 9
stop watch 41
system
vibrate mode 17
video gallery 21
view
calls 38
inbox 28
missed calls 38
voice
dial 34
mail 30
device information 48
language 43
NAM selection 45
security 44
select 44
standalone mode 43
privacy 46
services 46
volume
adjusting 16, 41
earpiece 41
W
T
wallpaper 42
WAP 27
talk and standby times 56
technical information 56
text entry 18, 29
wireless
Internet 22
Abc mode 18
networks 56
world clock 40
write and send messages 25
entry mode 19
number mode 19
text messages 24, 25
60
|