User Guide
User Guide for
Nokia 6200 phone
Phone notes
My Nokia information
Notes
Information source
Wireless service provider
Wireless service provider
Wireless service provider
Wireless service provider
Wireless service provider
My number
Voice mail number
Provider’s customer care
Message center number
Default recipient number
(e-mail gateway number)
International Mobile
Equipment Identifier (IMEI)
Label on back of phone
(under battery). See “Find
your phone label” on
page 16.
Model number
Phone type
6200
NPL-3
The wireless phone described in this guide is approved for use in GSM/GPRS/EDGE 850, 1800, and
1900 networks.
LEGAL INFORMATION
Part No. 9356027, Issue No. 1
Copyright © 2003 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 6200, and Pop-Port are trademarks or registered trademarks
of Nokia Corporation. All other product and company names mentioned herein may be trademarks
or tradenames of their respective owners.
Printed in Canada 03/2003
US Patent No 5818437 and other pending patents.
T9 text input software Copyright ©1999-2003. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information in this user guide was written for the Nokia 6200 phone. Nokia operates a policy
of continuous development. Nokia reserves the right to make changes and improvements to any of
the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME
OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE
LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT
PRIOR NOTICE.
EXPORT CONTROLS
This product contains commodities, technology or software exported from the United States in
accordance with the Export Administration regulations. Diversion contrary to U.S. or Canadian law
is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your
telephone if such interference cannot be eliminated. If you require assistance, contact your local
service facility. This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
Manufactured or sold under one or more following US Patents.
Asterisk (*) indicates design patents pending.
4868846
4969192
5001372
5045973
5101175
5212834
5230091
5233634
5241284
5241583
5266782
5311151
5311179
5317283
5331638
5335362
5353328
5378935
5384782
5390223
5396657
5400949
5416435
5442521
5444816
5446364
5479476
5487084
5493255
5519885
5526366
5553125
5557639
5565821
5570369
5581244
5597102
5625274
5640395
5664004
5664053
5669069
5677620
5678224
5692032
5699406
5699482
5701392
5729534
5729541
5734683
5754976
5760568
5782646
5794142
5802465
5805084
5805301
5827082
5835889
5839101
584884
5966378
5970059
5987137
5991716
5991857
5999523
6005857
6011853
6014573
6018277
6026161
6028567
6029128
6038238
6043760
6047196
6049796
6050415
6055439
6060193
6069923
6072787
6081534
6084962
6088746
6094587
6097964
6105784
6108553
6112099
6115617
6118775
6121846
6122498
6128322
6128509
6138091
6140966
6144243
6144676
6148209
6151485
6151507
6163609
6164547
6167248
6170073
6178535
6185295
6188909
6195338
6199035
6201876
6219560
6240076
6240079
6249584
6259312
6266330
6282436
6285888
6292668
6295286
6308084
6310609
6311054
6314166
6324412
6347218
6356759
6359904
6363259
6370362
6370390
6377803
6393121
6430721
6434133
*29170209
*29170227
*29170247
*29170248
5845219
5857151
5862178
5870683
5887266
5889770
5892475
5898925
5907823
5914690
5914796
5915440
5917868
5920826
5926138
5926769
5930233
5946651
5956332
5956625
5956633
5960354
5960389
5963901
5966374
Contents
1
2
Multimedia messaging service (MMS). . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Polyphonic sound (MIDI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
(E)GPRS and EDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Speakerphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
JavaTM applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3
4
Get the most out of this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Understand wireless network services . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Understand your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Menu shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Switch your phone on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Options during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Check the Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Browse phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Set up your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
5
6
Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Standard mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Predictive text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Manage phone security . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Fixed dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
[ i ]
7
8
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
View the contacts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Save contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Copy contact list entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Voice dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Set up a caller group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Change text, e-mail, and picture message settings . . . . . . . . . . . . . . . 75
Use the info message service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Call log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Call log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
View missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
View received calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
View dialed numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Delete call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
View call duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Profiles (Menu 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Select a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Customize a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Set a timed profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
[ ii ]
Right selection key settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Time and date settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Enhancement settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Set an alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Turn the radio on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Use the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Save a radio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Open the gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
View folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
Organizer (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Use the calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Send and receive calendar notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Make a to-do list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Games (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Launch a game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Applications (Menu 10). . . . . . . . . . . . . . . . . . . . . . . . . .115
Launch an application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Download applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
View application memory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Extras (Menu 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Use the calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Use the currency converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
[ iii ]
Voice recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Infrared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
(E)GPRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Nokia PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Sign on to the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Use browser options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Navigate the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Use bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Security issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
9
Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Battery statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Use proper care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Understand important safety information. . . . . . . . . . . . . . . . . . . . . . 141
Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Certification information (SAR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Battery information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Frequently asked questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Nokia One-Year Limited Warranty. . . . . . . . . . . . . . . . . . 159
Appendix A Message from the CTIA
to all users of mobile phones. . . . . . . . . . . . . . . . . . . . . . 165
Appendix B Message from the FDA
to all users of mobile phones. . . . . . . . . . . . . . . . . . . . . . 169
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
[ iv ]
1 For your safety
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this manual.
Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Don't use a handheld phone while driving.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch the phone off near
medical equipment.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the phone at a refueling point. Don't use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Don't use the phone where blasting is in progress. Observe
restrictions, and follow any regulations or rules.
USE SENSIBLY
Use only in the normal position. Don't touch the antenna
unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair phone
equipment.
[ 1 ]
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make backup copies of all important data.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
CALLING
Ensure the phone is switched on and in service. Enter the phone
number, including the area code, then press h. To end a call,
press i. To answer a call, press h.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press ias many
times as needed (for example, to exit a call, to exit a menu) to
clear the display. Enter the emergency number, then press h.
Give your location. Do not end the call until told to do so.
[ 2 ]
Overview of functions
2 Overview of functions
• MULTIMEDIA MESSAGING SERVICE (MMS)
Your phone can send and receive multimedia messages made up of text
and pictures. You can also save pictures and ringing tones to personalize
your phone. You may also be able to receive polyphonic ringing tones.
See “Multimedia messages” on page 63 for more information.
Important: This feature uses shared memory. See “Shared
memory” on page 12 for more information.
• POLYPHONIC SOUND (MIDI)
Polyphonic sounds are used in ringing tones and message alert tones.
They consist of several sound components played at the same time, like
an actual melody through a speaker. Your phone has sound components
from over 40 instruments that can be used for polyphonic sounds and the
phone can play up to eight instruments simultaneously. The phone supports
scalable polyphonic MIDI (SP-MIDI) format.
You can receive polyphonic ringing tones via multimedia service (see “Read
and reply to a multimedia message” on page 67), or download them via the
gallery menu (see “Gallery (Menu 7)” on page 105).
• (E)GPRS AND EDGE
General packet radio service (GPRS) and enhanced general packet radio
service (EGPRS), also known as enhanced data rates for global evolution
(EDGE), technology allows mobile phones to send and receive data over a
mobile network.
Applications such as xHTML, MMS, text messaging, and JavaTM use
(E)GPRS/EDGE. Your phone supports up to three simultaneous (E)GPRS/
EDGE connections. For more information, see “(E)GPRS” on page 125.
[ 3 ]
Before using (E)GPRS technology:
•
Contact your network operator or service provider for availability and
subscription to the (E)GPRS service.
•
Save the (E)GPRS settings for each of the applications used over
(E)GPRS.
PRICING FOR (E)GPRS AND APPLICATIONS
Your wireless provider may charge for (E)GPRS services. For more information
on pricing, contact your wireless provider.
• SPEAKERPHONE
You can use your phone as a speakerphone during a call. Do not hold the
phone to your ear during speakerphone operation.
•
•
To activate the speakerphone, press Loudsp.
To deactivate the speakerphone during a call, press Handset.
The speakerphone deactivates automatically when you end the call,
• JAVATM APPLICATIONS
Your phone supports JavaTM and includes some Java applications and games
that have been specially designed for mobile phones. You may be able to
download new applications and games to your phone from a PC with Java
installer software or from some mobile Internet services. See “Applications
(Menu 10)” on page 115 for more information.
Important: This feature uses shared memory. See “Shared memory”
on page 12 for more information.
• FM RADIO
Your phone has an FM radio. You can listen to the radio through a headset
or the handsfree speaker (with the headset attached). See “Radio (Menu 6)”
on page 103 for more information.
[ 4 ]
Welcome and quick guide
3 Welcome and quick guide
Congratulations on your purchase of the Nokia 6200 mobile phone.
Your phone provides many functions which are practical for daily use,
such as a calendar, radio, alarm clock, calculator, voice recorder, speakerphone
and more. Your phone can also connect to a PC, laptop, or other device
using the data cable or built-in IR port.
• GET THE MOST OUT OF THIS GUIDE
The following tips can help you get the most from this guide as you learn
to use your phone.
Learn text conventions
This user guide provides text clues to help make instructions clear and
easy to follow. These clues are called conventions.
Convention
What it means
bold
The word or phrase appears on the phone display.
bold and blue The text refers to an address on the world wide web.
italics
Indicates emphasis. Pay close attention to any
information in italics.
Follow graphic clues
This guide uses certain icons to alert you to important information.
Tip: Indicates a shortcut or alternate method of doing something.
Note: Explains a feature or points out an important concept.
Important: Indicates critical information on using a feature.
Caution: Warns when you may lose information.
Warning: Helps you avoid personal injury, damage to the phone,
or property damage.
[ 5 ]
Look for updates
From time to time, Nokia updates this guide to reflect changes. The latest
version may be available at www.nokia.com/us. Also, an interactive
tutorial may be available at www.nokiahowto.com.
• UNDERSTAND WIRELESS NETWORK SERVICES
A number of features in this guide are called network services. These are
special services that you arrange through your wireless service provider.
Before you can take advantage of any of these network services, you must
subscribe to them through your wireless provider and obtain instructions
for their use from your service provider.
• REGISTER YOUR PHONE
Make sure to register your phone at www.warranty.nokiausa.com or
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs
better if you should need to call the center or have your phone repaired.
E-Newsletters
When you register your phone, you can sign up for Nokia's e-newsletter,
Nokia Connections, if you would like. You will receive tips and tricks on
using your phone, enhancement information, and special offers.
• LEARN ABOUT ACCESSIBILITY SOLUTIONS
Nokia is committed to making mobile phones easy to use for all
individuals, including those with disabilities. Nokia maintains an
internet site that is dedicated to accessibility solutions. For more
information about phone features, enhancements, alternate format
user guides, and other Nokia products designed with your needs
in mind, visit the website at www.nokiaaccessibility.com or
call 1-888-665-4228 for more information.
[ 6 ]
Use the antenna
Your phone has a built-in antenna. As with any
other radio transmitting device, avoid touching
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects
call quality and may cause the phone to operate
at a higher power level than otherwise needed.
Not touching the antenna area during a phone
call optimizes the antenna performance and the
talk time of your phone.
Use the battery
CHARGE THE BATTERY
1
Plug the charger into a standard ac outlet.
2
Insert the charger output plug into
the round connector at the bottom
end of the phone.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely empty, it may take a few minutes before the
charging indicator appears on the display or any calls can be made.
Tip: You can use the phone while the charger is connected.
IMPORTANT BATTERY INFORMATION
Important: Your phone is powered by a rechargeable battery.
Use only batteries approved by Nokia and recharge your battery
only with the chargers approved by Nokia. Never use any charger
or battery which is damaged.
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the operating time (talk-time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
[ 8 ]
Welcome and quick guide
PROLONG THE BATTERY
Use the following guidelines to obtain the best performance from
your battery:
•
•
With your phone turned off, charge your new battery for three hours
before its first use. Use the battery until it is fully discharged. Repeat
this procedure twice for a total of three charging cycles.
Note that the full performance of a new battery is achieved only after
two or three complete charge and discharge cycles. Battery operation
times may be less than the estimated times during the first charges.
This condition is normal.
•
•
•
You can use your phone while the battery is charging. However, if the
battery is completely empty, it may need to recharge a few minutes
before you can make or receive calls or the battery indicator appears.
After the first charge, you can make and receive calls during the
charging cycle, but the calls lengthen the charging time. When the
phone call ends, the charge will resume.
The bars on the screen stop scrolling and remain constant when the
phone is fully charged. If you leave the phone connected to the charger,
the battery receives an additional charge. If you switch the phone on
when charging is complete, the Battery full message momentarily
appears in the display.
Note: The battery will accept a “trickle charge" for an additional
two hours.
REPLACE THE BATTERY
You will need to remove the existing battery if you want to replace the
battery or insert the SIM card. Make sure the phone has been turned off
for 10 seconds before removing the battery.
Note: Before removing the phone cover, always switch off the
power and disconnect the phone from the charger or any other
device. Always store and use the phone with the covers attached.
[ 9 ]
REMOVE THE BACK COVER
1
With the back of the phone facing
you, push down on the back cover
release button.
1
2
2
Slide the back cover toward the
bottom of the phone and remove.
REMOVE THE BATTERY
3
After you have removed the back
cover, insert your finger into the
finger grip and lift the battery
from its compartment.
3
Install the SIM card
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
Before installing the SIM card, always make sure that the phone is
switched off and that you have removed the cover and battery.
Warning: Keep all SIM cards out of reach of small children.
1
2
Slide the SIM card holder toward
the bottom end of the phone until
it unlocks.
1
2
Swing the SIM card holder open.
[ 10 ]
Welcome and quick guide
3
4
5
Insert the SIM card into the holder
(beveled corner last) with the gold
contacts facing toward the top end
of the phone.
3
4
Close the SIM card holder.
Slide the SIM card holder toward
the top end of the phone until it
locks into place.
5
INSTALL THE BATTERY
The SIM card must be installed before
installing the battery.
1
Position the battery so the gold
contacts match up with those on
the phone. The battery label should
be facing away from the phone.
2
3
Insert the battery, contact end first
into the battery slot.
Snap the other end of the battery into place.
REPLACE THE BACK COVER
4
Slide the back cover toward the
top of the phone until you hear a
click and see the back cover
release button.
[ 11 ]
Use the selection and scroll keys
Below each corner of the display
are the selection keys. Press b
Left
select
Right
select
when Menu appears above it to
show the first of numerous menus.
Page through the rest of the
menus using the up and down
scroll keys (dor g). Press c
when Contacts appears above it to enter the contacts list.
Note: The function of the right selection key (c) can be modified
so that your most frequently used functions can be quickly
accessed from the Start screen. See “Right selection key settings”
on page 85 for details.
Tip: Press an up or down scroll key (dor g) from the Start
screen to view any entries in your contacts list.
Use four-way scrolling
In features, such as the calendar monthly view, text
messages, and special characters, you can move the
cursor up and down as well as left and right. To move the
cursor:
Up, press d
Left, press f
Right, press e
Down, press g
Shared memory
The following features in this phone may share memory: contacts, text
and multimedia messages, images and ringing tones in gallery, calendar
and to-do notes, Java games and applications, and voice recorder and
commands. Using any such features may reduce the memory available for
any features sharing memory. This is especially true with heavy use of any
of the features (although some of these features may have a certain
amount of memory specially allotted to them in addition to the amount
of memory shared with other features).
[ 12 ]
Welcome and quick guide
For example, saving many images, bookmarks, Java applications, or other
features sharing memory may take all of the shared memory and your
phone may display a message that the memory is full. In this case, delete
some of the information or entries stored in the shared memory features
before continuing.
The following functions use shared memory that is dependent on the
data quantity per item and shared memory available at a time in the
Nokia 6200 phone:
•
•
•
•
•
•
•
•
•
•
Contacts
Short messaging service (SMS) messages
Calendar notes
To-do list
Voice tags for commands
Voice tags for contacts
Multimedia messages (MMS)
MIDI ringing tones
Images
Java applications
[ 13 ]
• GET STARTED WITH THE QUICK GUIDE
Make a call
Answer a call
Answer a call with a
call waiting
Enter a phone number and press h.
Press hor press Options and select Answer call.
Press Answer or h.
End a call
Ignore a call
Redial last number
Adjust call volume
Use the in-call menu
Use 1-touch dialing
(if activated)
Press i.
Press Silence or iwhen your phone rings.
Press htwice.
Press up or down on the side volume key.
While in a call, press Options.
Press and hold any key 2 through 9.
Save a contact
Recall a contact
Check voice mail
Enter a number, press Options, and select Save. Enter a
name and press OK.
Press Contacts and select Find or press gand select
the name.
Press and hold 1or dial your voice mailbox number.
Write and send a text
message
Press Menu 01-1-1. After a pause, write the message.
Press Options, scroll to Send, press Select, enter the
recipient’s number, and press OK.
Write and send an
e-mail message
Press Menu 01-1-3. After a pause, enter the recipient’s
e-mail address. Press OK, enter a subject, and press OK.
Write your e-mail message, press Options, scroll to Send
e-mail, and press Select. Enter the e-mail server number
if necessary, and press OK. The e-mail message is sent.
Read a new message
Reply to a message
Press Show and, if necessary, press Select.
Press Options, select Reply, write the reply, press
Options, select Send, and press OK.
Reply to an e-mail
message
Press Options, scroll to Reply, and press Select. Compose
your message and press Options. Scroll to Sending options
and press Select. Scroll to Sending profile and press Select.
Highlight your e-mail profile and press Select. Press
Options, Accept, enter the e-mail address, and press OK.
Send a business card
Recall a contact from the contacts list. Press Details,
press Options, scroll to Send bus. card, and press Select.
Scroll to Via text message, and press Select. Enter the
recipient’s number or press Find to retrieve a number
from the contacts list. Press OK. The business card is sent.
[ 14 ]
Welcome and quick guide
• MENU SHORTCUTS
To access a menu or item, press Menu, then enter the numbers associated
with the desired menu or item. For example, press Menu 2-1 (Call log >
Missed calls) to view any missed calls.
1 MESSAGES
6 RADIO
Text messages. . . . . . . . . . . . 01-1
Multimedia msgs . . . . . . . . . 01-2
Voice messages. . . . . . . . . . . 01-3
7 GALLERY
8 ORGANIZER
1
Info messages . . . . . . . . . . . 01-4
Calendar. . . . . . . . . . . . . . . . . . 8-1
To-do list . . . . . . . . . . . . . . . . . 8-2
Message settings . . . . . . . . . 01-5
Service commands . . . . . . . . 01-6
9 GAMES
2 CALL LOG
Select game . . . . . . . . . . . . . . . 9-1
Game downloads. . . . . . . . . . . 9-2
Memory . . . . . . . . . . . . . . . . . . 9-3
Settings . . . . . . . . . . . . . . . . . . 9-4
Missed calls. . . . . . . . . . . . . . . 2-1
Received calls . . . . . . . . . . . . . 2-2
Dialed numbers. . . . . . . . . . . . 2-3
Delete recent call lists . . . . . . 2-4
Call timers. . . . . . . . . . . . . . . . 2-5
GPRS data counter . . . . . . . . . 2-6
GPRS connection timer . . . . . 2-7
10 APPLICATIONS
Select application . . . . . . . . . 10-1
App. downloads. . . . . . . . . . . 10-2
Memory . . . . . . . . . . . . . . . . . 10-3
3 PROFILES
Normal . . . . . . . . . . . . . . . . . . 3-1
Silent . . . . . . . . . . . . . . . . . . . . 3-2
Meeting. . . . . . . . . . . . . . . . . . 3-3
Outdoor . . . . . . . . . . . . . . . . . . 3-4
Pager . . . . . . . . . . . . . . . . . . . . 3-5
11 EXTRAS
Calculator . . . . . . . . . . . . . . . 11-1
Voice recorder . . . . . . . . . . . . 11-2
Voice commands . . . . . . . . . . 11-3
12 CONNECTIVITY
4 SETTINGS
Infrared . . . . . . . . . . . . . . . . . 12-1
GPRS. . . . . . . . . . . . . . . . . . . . 12-2
Synchronization. . . . . . . . . . . 12-3
Right selection key settings. . 4-1
Time and date settings. . . . . . 4-2
Call settings . . . . . . . . . . . . . . 4-3
Phone settings . . . . . . . . . . . . 4-4
Display settings . . . . . . . . . . . 4-5
Tone settings. . . . . . . . . . . . . . 4-6
Enhancement settings . . . . . . 4-7
Security settings. . . . . . . . . . . 4-8
Restore factory settings. . . . . 4-9
13 SERVICES
Home . . . . . . . . . . . . . . . . . . . 13-1
Bookmarks . . . . . . . . . . . . . . . 13-2
Download links . . . . . . . . . . . 13-3
Service inbox . . . . . . . . . . . . . 13-4
Settings . . . . . . . . . . . . . . . . . 13-5
Go to address. . . . . . . . . . . . . 13-6
Clear the cache . . . . . . . . . . . 13-7
5 ALARM CLOCK
1
For availability, contact your wireless provider.
[ 15 ]
• GET HELP
If you need help, Nokia Customer Care is available for assistance.
Before calling, please read “Frequently asked questions” on page 155
and “Troubleshooting” on page 158.
We also recommend that you write down the following information and
have it available if you call:
•
The International Mobile Equipment
Identifier (IMEI) on the type label of
your phone
Type label
•
Your zip code
Find your phone label
The IMEI information can be found on the
type label, which is located on the back of
the phone, beneath the battery.
Contact Nokia
Please have your phone or Nokia product with you when contacting any
of the numbers below:
Nokia Customer Care Center, USA Customer Care Centre, Canada
Nokia Mobile Phones
7725 Woodland Center Boulevard
Suite #150
Nokia Products Ltd.
601 Westney Road South
Ajax, Ontario L1S 4N7
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U
(1-888-665-4228)
Tel: 1-888-22-NOKIA
(1-888-226-6542)
Fax: 1-813-249-9619
Fax: 1-905-427-1070
For TTY users: 1-800-24-NOKIA
(1-800-246-6542)
Web site: www.nokia.ca
[ 16 ]
Welcome and quick guide
Contact your service provider
To use the network services available in your phone, you will need to sign
up with a wireless provider. In many cases, the wireless provider will
make available descriptions of their services and instructions for using
features such as:
•
•
•
•
•
Voice mail and voice privacy
Call waiting, call forwarding, and caller ID
Messaging
News and information services
Selected Internet services
Wireless providers may differ in their support of features. Before you sign
up, make sure a wireless provider supports the features that you need.
[ 17 ]
• SWITCH YOUR PHONE ON OR OFF
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
1
To turn your phone on or off, press and hold the
power key (a) on top of the phone for at least
4 seconds until the display light comes on.
If the phone displays Insert SIM card even though
the SIM card is properly inserted, or SIM card not
supported, contact your wireless provider.
2
3
Enter the PIN code if necessary and press OK.
For information on the PIN code, see “PIN code”
on page 39.
Enter the security code if necessary and press OK. For information on
the security code, see “Security code” on page 38.
Note: If the language that appears in your display is not correct,
see “Set the display language” on page 92 for information on
changing your phone’s display language.
• MAKE AND ANSWER CALLS
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Use the keypad
1
Enter the phone number (including the area code) and press h.
(To delete a character to the left of the cursor, press Clear.)
2
Press ito end the call or to cancel the call attempt.
[ 18 ]
Use the contacts list
1
At the Start screen, press dor gand scroll to the entry you wish
to view.
2
Press hto make the call or press Details to view details of the entry.
Tip: To quickly search the list of entries while in your contacts list,
press any key in which the letters match the first letter of the name
for which you are searching.
Answer or reject an incoming call
•
Press hto answer the call.
•
Press ito reject the call; the call is diverted to your voice mail if
you have activated call forwarding to your voice mailbox number
(see “Call forwarding” on page 88 for details).
If you press cto Silence the call, only the ringing tone is muted.
You can then either press Options to answer the call or Decline to
reject the incoming call.
Tip: If the HDB-4 or HDS-3 headset is connected, you can answer
or end a call by pressing the key on the headset.
Answer a call with the keypad locked
To answer a call with Keyguard on, simply press h. During the call, all
features function as normal. When you end or reject the call, the keypad
automatically relocks. For more information on Keyguard, see “Lock the
keypad (Keyguard)” on page 35.
Note: When the phone is locked, calls may be possible to the
emergency number programmed into your phone (for example,
911). Key in the emergency number and press h. The number is
displayed only after you have keyed in the last digit.
Redial the last number
1
At the Start screen, press hto display the last 20 numbers dialed.
2
Press hto redial the last number, or scroll to the number (or name)
you wish to redial and press h.
[ 19 ]
Adjust the earpiece volume
•
To increase the volume of a call, press the
volume up key on the left side of the phone.
V o l u m e
key
•
To decrease the volume of a call, press
the volume down key on the left side of
the phone.
When adjusting the volume, a bar chart appears in
the display screen indicating the volume level.
Make a conference call
Conference calling is a network service that allows up to six persons to
take part in a conference call.
1
2
Make a call to the first participant.
To call a new participant, press Options, scroll to New call, and
press Select.
3
Enter the phone number of the new participant (or press Find to
retrieve a number from your contacts list) and press Call. The first call
is put on hold.
4
5
When the new call picks up, press Options, scroll to Conference, and
press Select to connect the calls.
To add a new participant to the call, repeat Steps 2 through 4.
HAVE A PRIVATE CONVERSATION WITH ONE OF THE PARTICIPANTS:
6
Press Options, select Private call, and select the desired participant.
Rejoin the conference call as described in Step 4.
7
To end the conference call, press i.
• OPTIONS DURING A CALL
Many of the options that you can use during a call are network services.
Contact your service provider for more information.
[ 20 ]
Basic operations
1
Press Options during a call to display those in the following table:
Option
Hold/Unhold
Function
Places the current call on hold or takes the current
call off hold.
Loudspeaker/
Handset
Enables one of the handsfree features in your phone.
Lock keypad
Record
Locks the keypad to prevent accidental key-presses.
Voice recorder records an active phone conversation.
Endcall/Endall Disconnects the current call or all participants in a
calls
conference call.
New call
Touch tones
Contacts
Menu
Places a new call; the first call is put on hold.
Sends touch tones generated by your phone keypad.
Displays the contacts list.
Displays the main menus.
Mute
Mutes your voice; you can hear the other party but
they can not hear you.
2
3
Scroll to an option and press Select to activate the option or enter its
submenu.
Press Swap to switch between the active call and the call on hold,
press Transfer to connect a call on hold, and press ito disconnect
from all calls.
[ 21 ]
• CHECK THE START SCREEN
The Start screen is “home base” and indicates your phone is in idle mode.
What’s on the Start screen
Signal strength
Menu
Battery level
Contacts
HOME
Your wireless provider’s name may appear here.
Signal strength A higher bar indicates a stronger network signal.
Battery level
A higher bar indicates more power in the battery.
Left selection key; press this key when Menu is on the
Start screen to enter the menu list.
b
Right selection key; press this key when Contacts is on
the Start screen to enter the contacts list. If you have
modified the right selection key settings in your phone,
Go to is on the Start screen. See “Right selection key
settings” on page 85 for details.
c
Scroll keys; press either of these keys at the Start
screen to display the entries in your contacts list.
dor g
Left scroll key; press this key at the Start screen to
quickly create a SMS or MMS message.
f
e
Right scroll key; press this key at the Start screen to
quickly view the calendar.
[ 22 ]
Basic operations
Understand indicators and icons
Icon
Indicates...
You have one or more text or picture messages. See “Reply
to a message or e-mail” on page 62.
You have one or more multimedia messages. See “Read and
reply to a multimedia message” on page 67.
You have one or more voice messages. See “Voice messages”
on page 69.
Your phone keypad is locked. See “Lock the keypad
(Keyguard)” on page 35.
Your phone is set to the Silent profile. See “Profiles
(Menu 3)” on page 82.
The alarm clock is set to On. See “Alarm clock (Menu 5)” on
page 101.
An (E)GPRS dial-up connection is active. See “(E)GPRS
dial-up connections” on page 126.
An (E)GPRS connection is available (if Always online is
selected) but not active. See “(E)GPRS dial-up connections”
on page 126.
You have an incoming or outgoing call during a (E)GPRS
dial-up connection. (E)GPRS is suspended.
IR connection indicator. See “Infrared” on page 124.
Forward all voice calls. All calls are forwarded to another
number. If you have two phone lines, the indicator for line
1 is
and for line 2
.
If you have two phone lines, this indicates that you are on
the second phone line. See “Phone settings” on page 92.
[ 23 ]
Icon
Indicates...
Integrated handsfree is active. See “Speakerphone” on
page 4.
Calls are limited to a closed user group. See “Closed user
groups” on page 38.
The timed profile is selected. See “Profiles (Menu 3)” on
page 82.
or
or
A headset or loopset is connected to the phone.
The phone is connected to a car kit.
Voice privacy encryption is active (or is not active) in
the network.
• BROWSE PHONE MENUS
Your phone features are grouped according to function and are accessed
through the main menus. Each main menu contains submenus and lists
from which you can select or view items and customize phone features.
You can access these menus and submenus by using the scroll method or
by using a shortcut.
Note: Some features may not be available, depending on your
network. For more information, contact your wireless provider.
Use the scroll method
At the Start screen, press Menu, then use the up and down scroll keys
(dor g) to scroll through the main menus.
As you scroll through the menus, the menu
Menu
number appears in the upper right corner of
number
the display. Below the menu number is a scroll
bar with a tab. The tab moves up or down as
you scroll through the menus, providing a
visual representation of your current position
in the menu structure.
Scrollbar
with tab
[ 24 ]
Basic operations
When you arrive at a menu or submenu:
•
•
•
Press Select (b) to access submenus.
Press Back (c) to return to the previous menu.
Press ior Exit to return to the Start screen from any menu or
submenu.
Check in-phone help
Many features have brief descriptions (help text) which can be viewed on
the display. To view these descriptions, scroll to a feature and wait for
about 15 seconds. Press More to view all of the description (if necessary),
or press Back to exit.
The default setting for help text is On. However, you can turn help text on
or off by doing the following:
1
2
3
At the Start screen, press Menu, scroll to Settings and press Select.
Scroll to Phone settings and press Select.
Scroll to Help text activation and press Select. On and Off appear in
the display.
4
Scroll to On or Off and press Select. A confirmation message appears
in the display indicating your selection.
Use a shortcut
You can go directly to almost any menu or submenu, as well as activate
most features by using a shortcut.
Press Menu, then within 3 seconds, press the key or keys associated with
the menu function you want to view or activate.
For example, to select the Meeting profile, press Menu 3-3-1 from
3
3
1
the Start screen (Menu > Profiles > Meeting > Select). After a
brief pause, the Meeting profile is activated.
A complete list of shortcuts begins on the following page.
[ 25 ]
Menu shortcuts
To access a menu or item, press Menu, then enter the numbers associated
with the desired menu or item. For example, press Menu 2-1 (Call log >
Missed calls) to view any missed calls.
Note: Some shortcuts may not be available, depending on your
network. For availability, contact your wireless service provider.
1 MESSAGES
2 CALL LOG
TEXT MESSAGES . . . . . . . . . 01-1
Create message. . . . . . . 01-1-1
Inbox . . . . . . . . . . . . . . . 01-1-2
Create e-mail . . . . . . . . 01-1-3
Sent items . . . . . . . . . . . 01-1-4
Archive. . . . . . . . . . . . . . 01-1-5
Templates . . . . . . . . . . . 01-1-6
My folders . . . . . . . . . . . 01-1-7
Distribution lists . . . . . . 01-1-8
Delete messages . . . . . . 01-1-9
MULTIMEDIA MSGS. . . . . . . 01-2
VOICE MESSAGES . . . . . . . . 01-3
Listen to voice
MISSED CALLS . . . . . . . . . . . 2-1
RECEIVED CALLS . . . . . . . . . 2-2
DIALED NUMBERS . . . . . . . . 2-3
DELETE RECENT CALL LISTS . 2-4
All . . . . . . . . . . . . . . . . . . . 2-4-1
Missed . . . . . . . . . . . . . . . 2-4-2
Received. . . . . . . . . . . . . . 2-4-3
Dialed . . . . . . . . . . . . . . . . 2-4-4
CALL TIMERS . . . . . . . . . . . . 2-5
Duration of last call. . . . . 2-5-1
Duration of received
calls. . . . . . . . . . . . . . . . . . 2-5-2
Duration of dialed
messages . . . . . . . . . . . . 01-3-1
Voice mailbox number . 01-3-2
INFO MESSAGES . . . . . . . . . 01-4
Info service . . . . . . . . . . 01-4-1
Topics. . . . . . . . . . . . . . . 01-4-2
Language . . . . . . . . . . . . 01-4-3
Info topics saved on
calls. . . . . . . . . . . . . . . . . . 2-5-3
Duration of all calls. . . . . 2-5-4
Clear timers . . . . . . . . . . . 2-5-5
GPRS DATA COUNTER. . . . . . 2-6
Data sent in last
session . . . . . . . . . . . . . . . 2-6-1
Data received
SIM card . . . . . . . . . . . . 01-4-4
Read (if received only) . 01-4-5
MESSAGE SETTINGS . . . . . . 01-5
Text messages . . . . . . . . 01-5-1
Multimedia msgs. . . . . . 01-5-2
Other settings . . . . . . . . 01-5-3
SERVICE COMMANDS . . . . . 01-6
in last session. . . . . . . . . . 2-6-2
All sent data. . . . . . . . . . . 2-6-3
All received data . . . . . . . 2-6-4
Clear counters . . . . . . . . . 2-6-5
GPRS CONNECTION TIMER . . 2-7
Duration of last session . 2-7-1
Duration of all sessions. . 2-7-2
Clear timers . . . . . . . . . . . 2-7-3
[ 26 ]
Basic operations
TIME AND DATE SETTINGS. . 4-2
Clock . . . . . . . . . . . . . . . . 4-2-1
Date . . . . . . . . . . . . . . . . . 4-2-2
Auto-update of
3 PROFILES
NORMAL . . . . . . . . . . . . . . . . 3-1
Select . . . . . . . . . . . . . . . .3-1-1
Customize . . . . . . . . . . . . .3-1-2
Ringing options. . . . .3-1-2-1
Ringing tone . . . . . . .3-1-2-2
Ringing volume. . . . .3-1-2-3
Vibrating alert. . . . . .3-1-2-4
Message alert tone. .3-1-2-5
Keypad tones. . . . . . .3-1-2-6
Warning tones . . . . .3-1-2-7
Alert for. . . . . . . . . . .3-1-2-8
Timed. . . . . . . . . . . . . . . . .3-1-3
SILENT. . . . . . . . . . . . . . . . . . 3-2
Select . . . . . . . . . . . . . . . .3-2-1
Customize . . . . . . . . . . . . .3-2-2
Ringing options. . . . .3-2-2-1
Ringing tone . . . . . . .3-2-2-2
Ringing volume. . . . .3-2-2-3
Vibrating alert. . . . . .3-2-2-4
Message alert tone. .3-2-2-5
Keypad tones. . . . . . .3-2-2-6
Warning tones . . . . .3-2-2-7
Alert for. . . . . . . . . . .3-2-2-8
Profile name . . . . . . .3-2-2-9
Timed. . . . . . . . . . . . . . . . .3-2-3
MEETING. . . . . . . . . . . . . . . . 3-3
OUTDOOR . . . . . . . . . . . . . . . 3-4
PAGER. . . . . . . . . . . . . . . . . . 3-5
Submenus for Meeting, Outdoor,
and Pager are the same as Silent.
date & time . . . . . . . . . . . 4-2-3
CALL SETTINGS . . . . . . . . . . 4-3
Call forwarding . . . . . . . . 4-3-1
Anykey answer . . . . . . . . 4-3-2
Automatic redial . . . . . . . 4-3-3
1-touch dialing . . . . . . . . 4-3-4
Call waiting . . . . . . . . . . . 4-3-5
Summary after call . . . . . 4-3-6
Send my caller identity. . 4-3-7
Line for outgoing calls . . 4-3-8
PHONE SETTINGS . . . . . . . . . 4-4
Language . . . . . . . . . . . . . 4-4-1
Automatic keyguard . . . . 4-4-2
Cell info display. . . . . . . . 4-4-3
Welcome note . . . . . . . . . 4-4-4
System selection . . . . . . . 4-4-5
Confirm SIM service
actions . . . . . . . . . . . . . . . 4-4-6
Help text activation . . . . 4-4-7
Start-up tone . . . . . . . . . 4-4-8
Memory status . . . . . . . . 4-4-9
DISPLAY SETTINGS . . . . . . . . 4-5
Wallpaper . . . . . . . . . . . . 4-5-1
Color schemes . . . . . . . . . 4-5-2
Operator logo . . . . . . . . . 4-5-3
Screen saver timeout . . . 4-5-4
Display brightness. . . . . . 4-5-5
TONE SETTINGS . . . . . . . . . . 4-6
Ringing options. . . . . . . . 4-6-1
Ringing tone . . . . . . . . . . 4-6-2
Ringing volume . . . . . . . . 4-6-3
Vibrating alert. . . . . . . . . 4-6-4
Message alert tone . . . . . 4-6-5
Keypad tones. . . . . . . . . . 4-6-6
Warning tones. . . . . . . . . 4-6-7
Alert for . . . . . . . . . . . . . . 4-6-8
4 SETTINGS
RIGHT SELECTION KEY
SETTINGS . . . . . . . . . . . . . . . 4-1
Select options. . . . . . . . . .4-1-1
Organize . . . . . . . . . . . . . .4-1-2
[ 27 ]
ENHANCEMENT SETTINGS. . . 4-7
Headset . . . . . . . . . . . . . . 4-7-1
Default profile . . . . . 4-7-1-1
Automatic answer. . 4-7-1-2
Handsfree . . . . . . . . . . . . 4-7-2
Default profile . . . . . 4-7-2-1
Automatic answer. . 4-7-2-2
Lights . . . . . . . . . . . . 4-7-2-3
Loopset . . . . . . . . . . . . . . 4-7-3
Default profile . . . . . 4-7-3-1
Automatic answer. . 4-7-3-2
TTY/TDD . . . . . . . . . . . . . . 4-7-4
Use TTY. . . . . . . . . . . 4-7-4-1
Music stand. . . . . . . . . . . 4-7-5
SECURITY SETTINGS. . . . . . . . 4-8
PIN code request. . . . . . . 4-8-1
Call restrictions. . . . . . . . 4-8-2
Fixed dialing . . . . . . . . . . 4-8-3
Closed user group . . . . . . 4-8-4
Security level. . . . . . . . . . 4-8-5
Access codes . . . . . . . . . . 4-8-6
RESTORE FACTORY
10 APPLICATIONS
SELECT APPLICATION . . . . . 10-1
APP. DOWNLOADS . . . . . . . 10-2
MEMORY . . . . . . . . . . . . . . 10-3
11 EXTRAS
CALCULATOR . . . . . . . . . . . .11-1
VOICE RECORDER. . . . . . . . .11-2
VOICE COMMANDS . . . . . . .11-3
12 CONNECTIVITY
INFRARED. . . . . . . . . . . . . . 12-1
GPRS . . . . . . . . . . . . . . . . . 12-2
GPRS connection . . . . . .12-2-1
GPRS modem settings. .12-2-2
SYNCHRONIZATION . . . . . . 12-3
Synchronize . . . . . . . . . .12-3-1
Settings . . . . . . . . . . . . .12-3-2
13 SERVICES
HOME. . . . . . . . . . . . . . . . . 13-1
BOOKMARKS . . . . . . . . . . . 13-2
DOWNLOAD LINKS. . . . . . . 13-3
SERVICE INBOX . . . . . . . . . 13-4
SETTINGS . . . . . . . . . . . . . . 13-5
GO TO ADDRESS. . . . . . . . . 13-6
CLEAR THE CACHE . . . . . . . 13-7
SETTINGS. . . . . . . . . . . . . . . . 4-9
5 ALARM CLOCK
6 RADIO
7 GALLERY
8 ORGANIZER
CALENDAR. . . . . . . . . . . . . . . 8-1
TO-DO LIST . . . . . . . . . . . . . . 8-2
9 GAMES
SELECT GAME . . . . . . . . . . . . 9-1
GAME DOWNLOADS . . . . . . . 9-2
MEMORY. . . . . . . . . . . . . . . . 9-3
SETTINGS. . . . . . . . . . . . . . . . 9-4
[ 28 ]
Basic operations
• SET UP YOUR PHONE
Adjust display brightness
1
Press Menu 4-5-5 (Settings > Display settings > Display brightness).
After a brief pause, a bar chart appears in the display indicating the
current brightness level.
2
Set the clock
Before many functions such as call timers, alarms, and other features will
operate properly, you need to set the clock.
1
At the Start screen, press Menu 4-2-1 (Settings > Time and date
settings > Clock). After a brief pause, Show clock (or Hide clock),
Set the time, and Time format appear in the display with Show clock
(or Hide clock) highlighted.
2
3
4
Scroll to Set the time and press Select.
Enter the time (in hh:mm format) and press OK.
Scroll to am or pm and press Select. The time is set.
Call and setup your voice mail
See “Voice messages” on page 69 for complete instructions and
information on setting up your voice mail.
1
2
Once you have saved the voice mailbox number, press and hold 1.
When you connect and the prerecorded greeting begins, follow the
automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the number one of three ways:
•
•
•
Dial the number using the keypad.
Press and hold 1.
Press Listen if there is a notification message in the display.
[ 29 ]
When you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Use the optional headset
The HDB-4 headset kit may be purchased with your phone or separately
as an enhancement.
CONNECT THE HEADSET
1
Insert the headset plug into the
Pop-PortTM connector at the bottom
end of your phone.
2
Position the headset on your ear as it
appears in the illustration to the right.
With the headset connected, you can
make, answer, and end calls as usual:
•
•
•
Use the keypad to enter numbers.
Press hto place a call.
Press ito end a call.
[ 30 ]
Text entry
5 Text entry
You can use two methods for entering text and numbers.
•
The standard mode is the only way to enter names into the contacts
list or rename caller groups.
•
Predictive text input is a quick and easy method for writing messages
or making calendar notes.
• STANDARD MODE
Enter text (Abc)
•
Press a key once to insert the first letter on the key, twice for the
second letter, and so on. If you pause briefly, the last letter in the
display is accepted and your phone awaits the next entry.
•
•
•
Press 0to enter a space, thereby accepting a completed word.
Press 1to enter a period (.).
Press sto display special characters. See more about special
characters on the following pages.
Enter numbers (123)
To switch to 123 mode from Abc mode, press and hold pat any message
entry screen until the icon in the upper left corner of the display switches
from Abc to 123 (or vice versa).
CLEAR THE SCREEN
•
Press Clear to backspace the cursor and delete a character.
•
Press and hold Clear to backspace continuously and delete multiple
characters.
[ 31 ]
Enter punctuation and special characters
While at any text entry screen in standard mode, press sto display
special characters. If predictive text is on, press and hold sto display
special characters. The following characters are available:
.
,
/
‘
:
?
!
;
“
-
&
¥
¡
(
%
¤
)
*
@
=
]
_
+
<
{
>
£
$
[
}
\
~
^
¿
§
#
l
Use four-way scrolling
Up
Navigate special characters using the scroll
keys much as you would a joystick. Once a
character is highlighted, press Insert to
insert the character into your message.
Right
Left
Down
• PREDICTIVE TEXT INPUT
Predictive text allows you to quickly write messages using your keypad
and the built-in dictionary. It is much faster than using the traditional
“multi-tap” method. For each letter of the word that you are spelling, you
only need to press the corresponding key on your keypad once.
You can use predictive text to write messages, create calendar notes,
make to-do lists, and more.
Activate/deactivate predictive text
1
At a text entry screen, press and hold Options. T9 prediction off or
T9 prediction on appears (depending on the prior mode).
OR
If predictive text is off, press Options, scroll to Predictive text, and
press Select.
[ 32 ]
Text entry
2
Scroll to the language of your choice and press Select. Predictive text
is turned on. The predictive text icon (
) appears in the upper left
corner of the display.
Note: The language setting in predictive text affects the time and
date formats of the clock, alarm clock, and calendar.
Write with predictive text
For example, to write Nokia with the English dictionary selected, press each
below simulates your display each time a key is pressed.
6
6
5
4
2
PREDICTIVE TEXT TIPS
•
•
•
•
•
•
Press 0to enter a space and begin writing the next word.
If a displayed word is not correct, press sto see other matches.
If ? appears after a word, press Spell to add the word to the dictionary.
Press 1to insert a period into your message.
Press and hold Options to turn predictive text on and off.
Press and hold sto display special characters. See “Enter punctuation
and special characters” and “Use four-way scrolling” on the previous
page for the easiest way to enter special characters.
Note: Press pto switch predictive text on and off or to cycle
through the available modes. As you press p, the following icons
(not descriptions) appear in the display:
Uppercase text. Predictive text is Off.
Lowercase text. Predictive text is Off.
Sentence case text. Predictive text is On.
Lowercase text. Predictive text is On.
[ 33 ]
Add new words to the dictionary
If you encounter a word that predictive text does not recognize, a
question mark (?) follows the word and Spell appears in the lower
left of the display.
•
Press Spell, enter your new word using the keypad, and press Save.
The word is added to the dictionary as well as to the message you
are writing.
NOTES ABOUT ADDING WORDS
•
•
•
New words that you accept by pressing Select, 0, or deleting the
space between two words are saved to the dictionary.
Depending on the language and the length of the words, you may be
able to add hundreds of words to the dictionary.
When the dictionary is full, the most recent addition replaces the first.
[ 34 ]
Manage phone security
6 Manage phone security
Lock the keypad (Keyguard)
Remember to lock your phone keypad to prevent accidental calls. If the
keypad is locked, it unlocks when you receive a call. After the call, the lock
automatically reactivates.
Important: When the phone is locked, calls may be possible to
emergency numbers (for example, 911). Key in the emergency
number and press h. The number appears in the display after you
have keyed in the last digit.
To lock the keypad, press Menu sat the Start screen.
Unlock the keypad
At the Start screen, press Unlock s.
• SECURITY LEVELS
The security level determines your access to features when a “nonowner”
SIM card is used. A nonowner SIM card is one (other than the original) that
is inserted after you power off the phone. There are three security levels:
Off
Owner and nonowner cards are treated the same.
Memory Nonowner cards can access SIM memory. Any changes to
the memory setting requires the security code.
The owner card has access to all features, but the security
code is required to change a memory setting.
Phone
The security code is required upon power-up.
Set your security level
1
At the Start screen, press Menu 4-8-5 (Settings > Security settings >
Security level). After a brief pause, you are prompted to enter the
security code. The default code is 12345.
[ 35 ]
2
3
Enter the security code and press OK.
Scroll to Off, Memory, or Phone and press Select. A message appears
in the display confirming your selection
• FIXED DIALING
Once you setup and activate a fixed dialing list, your phone can make calls
only to those numbers that you have defined in the fixed dialing list. Fixed
dialing is a network feature and must be supported by your wireless provider.
Note: When fixed dialing is set on, calls may be possible to certain
emergency numbers in some networks (for example, 911 or other
official emergency number).
Set up and activate a fixed dialing list
1
At the Start screen, press Menu 4-8-3 (Settings > Security Settings >
Fixed dialing). After a brief pause, the options in the following table
appear in the display:
On
Off
Number list
Activate fixed dialing (see note above).
Deactivate fixed dialing.
View the numbers in your fixed dialing list.
Note: If you activate fixed dialing and the number list is empty, a
“Call not allowed” message is displayed if you attempt outgoing
calls, except for emergency numbers such as 911.
2
Scroll to Number list and press Select. Fixed dialing not active and
then Fixed dialing list empty appear in the display. You are prompted
to enter the PIN2 code.
3
4
Enter the PIN2 code and press OK. If you do not know your PIN2 code,
see “PIN2 Code” on page 40 for more information.
Enter the fixed dialing number, or press Find to retrieve a number
from your contacts list, and press OK.
[ 36 ]
Manage phone security
5
6
Enter a name for the number and press OK. A confirmation note
appears in the display and you are returned to the fixed dialing
number list.
Press Back, scroll to On, and press Select to activate fixed dialing.
View or edit the fixed dialing list
1
2
3
4
At the Start screen, press Menu 4-8-3 (Settings > Security Settings >
Fixed dialing).
Scroll to Number list and press Select. You are prompted to enter the
PIN2 code.
Enter the PIN2 code and press OK. Any numbers which you have
assigned to fixed dialing appear in the display.
Scroll to a number and press Options. The options in the following
table appear in the display:
View number View the number for an entry.
Add
Add a number to your fixed dialing list.
Edit the highlighted entry.
Edit
Delete
Delete all
Delete the highlighted entry.
Delete all entries in your fixed dialing list.
•
•
Use the scroll keys to highlight an option.
Press Select to activate or enter the submenu of an option.
Notes about fixed dialing
•
If a SIM card with fixed dialing that is activated is inserted into a
phone that does not support fixed dialing, the SIM card is rejected.
•
If you try to add a name (without a number) to the fixed dialing list,
you will receive an error message.
[ 37 ]
•
•
If you try to browse the fixed dialing list, but have not stored any
numbers, Fixed dialing list empty appears in the display.
You cannot access SIM memory manually (view or copy numbers on
the SIM card) while fixed dialing is active.
Closed user groups
A closed user group is a network service that specifies the group of people
whom you can call and who can call you. For more information contact
your network operator or service provider.
Note: When calls are limited to closed user groups, calls may
be possible to certain emergency numbers in some networks
(for example, 911).
• ACCESS CODES
Use access codes to change your security code, PIN code, and PIN2 code.
Note: Avoid using codes similar to emergency numbers such as
911 to prevent accidental dialing of the emergency number.
Security code
The security code controls access to features such as the security level and
is supplied with the phone. The preset code is 12345.
Note: If you enter the wrong security code five times in succession,
you will not be able to enter a code for five minutes, even if you
power off the phone between incorrect entries.
CHANGE YOUR SECURITY CODE
Once you change the security code from its preset of 12345, keep the new
code secret, and in a safe place separate from your phone.
1
Press Menu 4-8-6-1 (Settings > Security settings > Access codes >
Change security code). After a brief pause, you are prompted to enter
the current security code (default is 12345).
2
Enter the current security code and press OK. You are prompted to
enter the new security code.
[ 38 ]
Manage phone security
3
4
Enter the new security code (up to 10 characters) and press OK.
You are asked to re-enter the new security code for verification.
Enter the new security code again and press OK. A message appears
in the display confirming your security code has been changed.
PIN code
The PIN code protects the SIM card from unauthorized access. The PIN code
can be 4-8 digits in length. After three successive incorrect entries the PIN
code is blocked and you will be asked to enter the personal unblocking key
(PUK) code. See “Personal unblocking key (PUK) codes” on page 40.
Note: The PIN code must be obtained from your wireless provider.
The PIN code is typically provided with your SIM card.
PIN CODE REQUEST
Enable your phone to request the PIN code upon power-up. This provides
extra security in case your phone is lost or stolen.
1
Press Menu 4-8-1 (Settings > Security settings > PIN code request).
After a brief pause, you are prompted to enter the current PIN code.
2
3
Enter the PIN code and press OK.
Scroll to On and press OK. A message appears in the display
confirming your selection.
CHANGE YOUR PIN CODE
Before you can change your PIN code, you will need to enable PIN code
request. See “PIN code request” immediately preceding this section.
1
Press Menu 4-8-6-2 (Settings > Security settings > Access codes >
Change PIN code). After a brief pause, you are prompted to enter the
current PIN code.
2
3
4
Enter the current PIN code and press OK. You are prompted to enter
the new PIN code.
Enter the new PIN code and press OK. You are prompted to re-enter
the new PIN code for verification.
Enter the new PIN code again and press OK. A message appears in the
display confirming your PIN code has been changed.
[ 39 ]
PIN2 Code
The PIN2 code is required for features such as fixed dialing. If you enter
an incorrect PIN2 code three times in succession, the PIN2 code is blocked
and you will have to enter the PUK2 code.
Note: The original PIN2 code must be obtained from your
wireless provider.
CHANGE YOUR PIN2 CODE
1
2
3
4
Press Menu 4-8-6-3 (Settings > Security settings > Access codes >
Change PIN2 code). You are prompted to enter the current PIN2 code.
Enter the current PIN2 code and press OK. You are prompted to enter
the new PIN2 code.
Enter the new PIN2 code and press OK. You are asked to verify the
new PIN2 code by entering it again.
Enter the new PIN2 code again and press OK. A message appears in
the display confirming you have changed the PIN2 code.
Personal unblocking key (PUK) codes
PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes.
Both PUK and PUK2 codes are eight characters in length and cannot
be changed. PUK and PUK2 codes must be obtained from your
wireless provider.
Important: If you enter an incorrect PUK or PUK2 code 10 times
in succession, the message SIM rejectedappears in the display and
the SIM card can no longer be used. You must contact your wireless
provider for a new SIM card.
[ 40 ]
Contacts
7 Contacts
Your contacts list can save up to 500 names, with multiple numbers and
text notes for each name. The amount of numbers and text entries that
you can save may vary, depending on their length and the total number
of entries in the contacts list.
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
• VIEW THE CONTACTS LIST
1
At the Start screen, press the right selection key (c) under Contacts.
The menu items in the left column of the following table appear in
the display:
Note: If you have changed the function of the right selection key
on your phone, Go to is on the Start screen. See “Right selection
key settings” on page 85 for details.
Menu item
Find
Function
Find a name or select from a list.
Add an entry to your contacts list.
Edit an existing contact.
Add entry
Edit name
Delete
Delete a contact and its associated numbers.
Copy
Copy entries from phone memory to SIM or SIM to
phone memory.
Add number Add a number to an existing contact.
Settings
Set memory in use (phone or SIM), change your
contacts list view, and check the memory status
of your phone and SIM card.
[ 41 ]
Menu item
Function
1-touch
dialing
Displays the list of 1-touch dialing numbers saved
to memory.
Voice tags
“Tags” are voice signals so you can call by speaking the
signal into your phone.
Info numbers Contact your wireless provider to obtain information.
Service
Contact your wireless provider to obtain service.
numbers
Own numbers Displays the numbers (line 1, line 2, data) in use by your
SIM card.
Caller groups View and edit the properties (such as the ring tone) for
any of the caller groups.
2
Scroll to an item, and press Select to activate the feature or enter
its submenu.
• SAVE CONTACTS
You can save contacts to phone memory or to SIM card memory.
Quickly save a contact (name and number)
1
2
3
At the Start screen, enter the phone number you wish to save.
Press Options, ensure Save is highlighted, and press Select.
Enter a name for the number and press OK. A confirmation message
appears in the display indicating your entry has been saved.
Quickly save a number only
You can save a phone number as a stand-alone entry in your contacts list.
1
2
At the Start screen, enter the number you wish to save.
Press and hold Options. A save confirmation is displayed.
[ 42 ]
Contacts
Save an entry using the contacts list
1
At the Start screen, press Contacts, scroll to Add entry, and
press Select.
2
3
4
Enter a name using the keypad and press OK.
Enter a number and press OK.
Press Done to return to the Start screen.
Save addresses and notes
To save an e-mail address, web address, street address, or a note, you will
need to add it to an existing contact.
1
Find the contact (name) in your contacts list to which you would like
to add an address or note.
2
3
4
5
With the entry highlighted, press Details.
Press Options, scroll to Add detail, and press Select.
Scroll to the address or note of your choice and press Select.
Enter the text for the note or address and press OK.
Note: Address and notes information cannot be saved into the
SIM card memory.
Select your contacts view and memory
1
Press Contacts, scroll to Settings, and press Select.
2
Scroll to any of the options in the following table, and press Select to
enter the submenu.
Option
Function
Memory Select the memory you wish to use. Options are Phone, SIM
in use
card, or Phone and SIM combined. With Phone and SIM
selected, names and numbers are saved to phone memory
but entries saved to both memories appear in the display.
[ 43 ]
Option
Function
Contacts Select the Name list, Name and number, or Name only view.
view
Memory View the amount of phone or SIM card memory used as well
status
as the amount of phone or SIM card memory available.
Save multiple numbers and text items per contact
You can save different types of phone numbers and short text items per
contact to the contacts list. The first number you save for any entry is
automatically set as the default, or primary number.
1
At the Start screen, press dor gand scroll to the entry to which
you wish to add a number or text item.
2
3
4
Press Details, then press Options.
Scroll to Add number or Add detail and press Select.
Scroll to one of the following types and press Select:
General
Mobile
Home
Work
Note
Fax
E-mail
Web
Street
address
address
address
5
Enter the number or text for the type you have selected and press OK.
(To change the type, select Change type in the options list.)
CHANGE THE DEFAULT (PRIMARY) NUMBER
1
At the Start screen, press dor g, scroll to the entry you wish to
change, and press Details.
2
3
Scroll to the number you wish to set as default and press Options.
Scroll to As primary number and press Select.
[ 44 ]
Contacts
Search for a name in the contacts list
1
2
3
At the Start screen, press dor gto display the contents of your
contacts list.
Press the key which corresponds to the first letter of the name for
which you are performing a search.
Press dor gto scroll up and down through contacts in the list.
Press for eto move the cursor left or right in the search window at
the bottom of the display, if necessary.
4
Press Details to view the details of the selected contact.
Edit a name, number, or text item
1
Search for the entry as described in the previous section and
press Details.
2
Scroll to the name, number, or text item you wish to edit and
press Options.
3
4
Scroll to Edit name, Edit number, or Edit detail and press Select.
Edit the name, number, or detail to your preference and press OK.
Delete contacts
1
At the Start screen, press Contacts, scroll to Delete, and press Select.
2
To delete individual names and numbers, scroll to One by one and
press Select.
3
4
5
6
Scroll to the entry you wish to delete, press Delete, and press OK to
confirm the deletion.
To delete the entire contents of your contacts list, scroll to Delete all,
then scroll to the contacts list you wish to delete (Phone or SIM card).
Press Delete, then press OK to confirm. You are asked to enter the
security code.
Enter the security code and press OK.
[ 45 ]
• COPY CONTACT LIST ENTRIES
1
At the Start screen, press Contacts, scroll to Copy, and press Select.
2
Scroll to From phone to SIM card or From SIM card to phone and
press Select. The following options appear in the display:
One by one
All
Select and copy entries one by one.
Copies all entries from the SIM card or phone.
Primary numbers Copies only primary numbers. This appears only if
you select From phone to SIM.
3
Scroll to the copy method of your choice and press Select.
a) If you selected One by one, go to Step 4.
b) If you selected All or Primary numbers., go to Step 6.
Scroll to the entry you wish to copy and press Copy.
4
5
Scroll to Keep original or Move original and press Select. The entry
is copied and you are returned to the list of contact list entries.
6
If you selected All or Primary numbers in Step 3, scroll to Keep
original or Move original and press Select.
Caution: Select Keep original if you are unsure of which copy
method to use. This ensures original entries are merely copied to
the new location. Move original deletes files after copying.
7
8
Press OK to confirm your choice. All entries are copied to the selected
destination.
Press Back to return to the list of contact list entries, or press ito
exit and return to the Start screen.
Send and receive business cards
You can send and receive an entry in your contacts list using IR or a text
message, if supported by your wireless provider.
[ 46 ]
Contacts
RECEIVE A BUSINESS CARD USING IR
1
Press Menu 12-1 (Connectivity > Infrared) to ensure IR is activated.
When you receive the business card, your phone beeps and a message
appears in the display.
2
Select Save to save the business card in the phone memory, or press
Exit (or OK) to discard the business card.
SEND A BUSINESS CARD
You can send a business card through IR or as an text message to a
compatible phone or other handheld device.
1
Highlight an entry from the contacts list that you wish to send and
press Details.
2
Press Options, scroll to Send bus. card, and press Select.
•
To send the business card through IR, make sure the receiving
device is set up to receive data through its IR port and select
Via infrared.
•
To send the business card as a message, select Via text message.
3
If you selected Via infrared (and the entry has multiple subentries),
scroll to Primary number or All details and press Select. Your business
card is sent.
4
5
6
If you selected Via text message (and the entry has multiple sub-
entries), scroll to Primary number or All details and press Select.
Enter the number for your recipient or press Find to retrieve a number
from your contacts list.
Press OK. The business card is sent.
• 1-TOUCH DIALING
You can assign any entry in your contacts list with keys 2through 9,
and then dial those entries by pressing and holding the assigned key.
[ 47 ]
Assign a key to 1-touch dialing
1
At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
2
3
Scroll to any empty slot and press Assign.
Enter the number (including the area code) and press OK, or press
Find to retrieve a number from your contacts list and press Select.
4
5
Enter a name for the number and press OK. If 1-touch dialing is off,
the phone displays a prompt asking if you would like to turn 1-touch
dialing on.
Press Yes to activate 1-touch dialing. The entry appears in the slot you
have assigned.
Make a call with 1-touch dialing
Press and hold the key to which an entry has been assigned. Your phone
dials the entry assigned to the key.
OR
Press the key to which an entry has been assigned and then press h.
Your phone dials the entry assigned to the key.
CHANGE 1-TOUCH DIALING NUMBERS
1
At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
2
Scroll to the 1-touch dialing entry you wish to change and
press Options.
3
4
Scroll to Change and press Select.
Enter the new number, or press Find to retrieve a number from your
contacts list, and press OK.
5
Enter a name for the entry and press OK.
DELETE 1-TOUCH DIALING NUMBERS
1
At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
[ 48 ]
Contacts
Scroll to the 1-touch dialing location you wish to delete and
2
press Options.
3
4
Press OK to delete the key assignment.
• VOICE DIALING
You can dial up to 10 stored numbers in your contacts list using the voice
dialing feature. Before you can place a call using voice dialing, you must
first assign a voice tag to the number.
Note: Your phone must be on to use this function. Do not switch
on the phone when wireless phone use is prohibited or when it
may cause interference or danger.
Assigning a voice tag to a phone number
You can create a voice tag (such as a person’s name) for up to 10 contact
list entries, then dial the number using the voice dialing feature. See “Dial
a number using voice dialing” on page 50 for more information.
It is easier for the phone to differentiate between long, unique voice tags.
For example, you might want to record a person’s first and last names
rather than only the first name.
ASSIGNING A VOICE TAG TO AN ENTRY
1
At the Start screen, scroll to the name you want to give a voice tag.
2
Press Details, then Options, scroll to Add voice tag, and press Select.
The phone displays Press Start, then speak after tone.
3
4
Press Start. Please speak now appears.
Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone automatically stops recording and then saves and replays the
voice tag. If recording is not successful, your phone displays Voice system
error. Press Options, scroll to Add voice tag, and repeat Steps 3 through 5.
[ 49 ]
DIAL A NUMBER USING VOICE DIALING
Before using voice dialing, note that:
•
•
•
•
•
Voice tags are not language dependent. They are dependent on the
speaker’s voice.
Voice tags are sensitive to background noise. For best results, record
them and make calls in a quiet environment.
When recording a voice tag or making a call by saying a voice tag,
hold the phone in the normal position near to your ear.
Very short names are not accepted. Use long names and avoid similar
names for different numbers.
Voice tags must be shorter than 2 seconds. Record them and make
calls in a quiet environment.
Note: You must say the name exactly as you said it when you
recorded it. This may be difficult in, for example a noisy environment
or during an emergency, so you should not rely solely upon voice
dialing in all circumstances.
1
2
Press and hold Contacts (or Go to) selection key.
When you hear several beeps and Please speak now appears, release
the button.
Note: If you have the optional headset attached, press and hold
the headset button. When the phone beeps and Please speak now
appears, release the button.
3
Pronounce the voice tag clearly into the microphone. When the phone
finds the voice tag, Found appears, and the phone automatically dials
the number.
If the phone does not locate a number or recognize the voice tag,
No match found appears.
If you are using the headset and the phone does not locate the number
or recognize the voice tag, you will hear an error tone and No match
found appears. To start voice dialing again, press and hold the headset
button immediately after the error tone.
[ 50 ]
Contacts
WORK WITH AN EXISTING VOICE TAG
After you have associated a voice tag to a command, you can choose one
of the following options:
Play back a voice tag
1
Press Contacts and scroll to Voice tags.
2
Press Select, then scroll to the name with the voice tag you want
to hear.
3
Press Options, scroll to Playback, and press Select.
Change a voice tag
1
Press Contacts and scroll to Voice tags.
2
Press Select, then scroll to the name with the voice tag you want
to change.
3
4
5
6
Press Options, scroll to Change, and press Select.
The phone displays Press Start, then speak after tone.
Press Start.
The phone repeats your voice tag, and Voice tag saved appears.
Delete a voice tag
1
Press Contacts and scroll to Voice tags.
2
Press Select, then scroll to the name with the voice tag you want
to erase.
3
4
Press Options, scroll to Delete, and press Select. Delete voice tag?
appears.
Press OK to erase the voice tag.
[ 51 ]
• VIEW INFO, SERVICE, AND OWN NUMBERS
Your wireless provider may save the operating number of your phone, as
well as various information and service numbers, to your SIM card.
Note: This feature may not be supported by your SIM card. If so,
contact your wireless provider for more information.
1
At the Start screen, press Contacts, scroll to one of the number types
in the following table, and press Select:
Number type
Info numbers
Use this number to...
Contact your wireless provider to obtain information
Service numbers Contact your wireless provider to obtain service
Own numbers
Display the operating number, or numbers which
have been assigned to your phone by your
wireless provider
2
To view details of any of the number types in the previous table, press
View when the number type appears in the display.
Caller groups
You can add contact list entries to any of five caller groups, then assign a
unique ringing tone or graphic to that group. This enables you to identify
callers from the group by their unique ringing tone or graphic. A caller
group can be as small as one person or as large as your entire contacts
list. Caller groups can be renamed to suit your preference.
CALLER GROUP OPTIONS
1
At the Start screen, press Contacts, scroll to Caller groups, and press
Select. Family, VIP, Friends, Business, and Other are the available
caller groups.
[ 52 ]
Contacts
2
Use the scroll keys (dor g) to highlight a group. Press Select to
display the following caller group options:
Rename group
Rename the group to your preference.
Group ringing tone Set the ringing tone for the group.
Group logo
Turn the graphic for the caller group on or off.
Add or remove members from the caller group.
Group members
• SET UP A CALLER GROUP
1
At the Start screen, press dor gto display a list of entries in your
contacts list.
Tip: Perform a “quick find” when contact list entries are displayed
by entering the first letter of a name.
appears at the bottom
of the display to indicate that you are performing a search.
2
Scroll to a contact you would like to add to a caller group and
press Details.
3
4
Press Options, scroll to Caller groups, and press Select.
Scroll to the caller group to which you would like to add the contact
and press Select. A confirmation message appears in the display.
[ 53 ]
8 Menu functions
Messages (Menu 1)
If you have subscribed to a message service,
you can send and receive SMS messages to
compatible phones that are also subscribed
to a message service.
You can also send and receive picture messages, MMS messages, and
e-mail if supported by your network. Composed messages can be up to
600 characters in length (when sent in sequences), and multimedia
messages can be up to 1000 characters in length.
Before you can send and receive messages, you will need the following:
•
•
A messaging service through your wireless provider
A message center number, which must be saved to your phone
(if your wireless provider has not done so already)
Message icons
Icons that precede the title of a message indicate the following:
The message has not been read.
The message has been read.
A message (which you have composed) has not been sent.
i
The message is a delivery report.
The message is an MMS message.
[ 54 ]
Menu functions
Choose your message type
You can choose the type of message sent by your phone. Types include
text, e-mail, page, and fax.
Note: This function can be used only if it is supported by your
wireless provider. The default message type is Text.
1
At the Start screen, press Menu 01-5-1-1 (Messages > Message
settings > Text messages > Sending profile). After a brief pause,
Default profile is highlighted.
2
3
4
Press Select.
Scroll to Messages sent as and press Select.
Scroll to the message type of your choice and press Select. A message
appears in the display confirming your selection.
Save your message center number
Messages sent by your phone are routed through your wireless provider’s
message center. Normally, this number is saved to your phone by your
wireless provider. To save the number manually, do the following:
1
At the Start screen, press Menu 01-5-1-1 (Messages > Message
settings > Text messages > Sending profile). After a brief pause,
Default profile is highlighted.
2
3
4
Press Select.
Scroll to Message center number and press Select.
If the box in the display is empty, enter the number given by your
wireless provider and press OK.
OR
If the box is in the display is full, edit the number only if you are
sure the number is incorrect and you would like to change the
number, and press OK.
A message appears in the display that confirms your number is saved.
[ 55 ]
• TIPS FOR COMPOSING A MESSAGE
Predictive text input
Predictive text allows you to quickly write messages using your keypad
and the built-in dictionary. You can use predictive text to write a message,
create a calendar note, make a to-do list, and more. See “Predictive text
input” on page 32 for more information on writing with predictive text.
• TEXT MESSAGES
Important: When sending SMS messages, your phone may display
the words Message sent. This is an indication that the SMS message
has been sent to the network and is not an indication that the
message has been received at the intended destination. For more
details about SMS services, check with your service provider.
Write and send a text message
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
1
2
At the Start screen, press Menu 01-1-1 (Messages > Text messages >
Create message). After a brief pause, the message entry screen
appears in the display.
Compose a message using the keypad and press Options. Send
is highlighted.
3
4
Press Select.
Enter the recipient’s phone number, or press Find to retrieve a number
from your contacts list, and press OK. Your message is sent.
Read a message
When you receive a message, your phone beeps and 1 message received
appears in the display as well as the unopened letter icon (
Press Show to read the message, or press Exit or ito move it to
your inbox.
Note: When you have unopened messages in your inbox,
).
1
is
shown in the upper left corner of the Start screen as a reminder.
[ 56 ]
Menu functions
2
3
Use the scroll keys (dor g) to view the whole message if necessary.
Tip: Keep scrolling to view other information, such as the sender
number and time the message was sent.
Press Exit to return to the Start screen, or press Options for other
choices, such as Reply or Forward.
READ A LINKED MESSAGE
Your phone can receive one long message (up to 600 characters) in
sequences. You can start reading the first part before the phone has
received the entire message.
While viewing the message, you may see Some text missing on the display.
This is normal, and the message content will be updated as soon as the
missing sequence arrives.
If the memory is full, you may have to delete a message from your inbox
or outbox before your phone can update the missing text.
Reply to a message
1
While viewing a message, press Options, scroll to Reply, and
press Select.
2
3
Scroll to a format on the Start reply with menu and press Select.
Compose your reply using the keypad, press Options, scroll to Send, and
press Select. The number of the original sender appears in the display.
4
Press OK. The reply is sent.
Forward a message
1
2
3
While viewing a message, press Options.
Scroll to Forward and press Select.
Choose to forward As text message or As e-mail and press Select.
If you chose to forward As text message, modify the text, if necessary,
and press Options. Scroll to Send and press Select. Enter the recipient’s
phone number, or press Find to retrieve the data from your contacts
list then press OK. The text message is forwarded.
[ 57 ]
If you chose to forward As e-mail, enter the recipient’s e-mail
address, or press Find to retrieve the data from your contacts list
then press OK. The e-mail is forwarded.
Set up a distribution list
You can create distribution lists so that a single message can be sent to
multiple contacts at the same time.
1
At the Start screen, press Menu 01-1-8 (Messages > Text messages >
Distribution lists). After a brief pause, the distribution list folder appears.
2
3
4
5
Press Add.
Enter a name for the distribution list and press OK.
Scroll to one of the options listed in the following table and press Select.
View list
Add or delete a contact from a distribution list or view
a distribution list.
Add list
Add a distribution list.
Rename list
Clear list
Rename a distribution list.
Delete all contacts from a distribution list.
Delete a distribution list.
Delete list
Note: Contacts saved to your SIM card cannot be added to a
distribution list. For more information on saving contacts to your
phone, see “Select your contacts view and memory” on page 43.
Send a message to a distribution list
1
At the Start screen, press Menu 01-1-1 (Messages > Text messages >
Create message). After a brief pause, the message entry screen
appears in the display.
2
3
Compose a message using the keypad and press Options.
Scroll to Sending options and press Select.
[ 58 ]
Menu functions
4
5
Scroll to Send to list and press Select.
Scroll to the distribution list and press Select. The message is sent to
all contacts in that distribution list.
• PICTURE MESSAGES
Note: This function can be used only if it is supported by your
network operator or service provider. Only phones that offer picture
message features can receive and display picture messages. This
more information.
Your phone comes with 10 preloaded pictures. You can, however, overwrite
any of the 10 pictures that come with your phone. Pictures can be attached
to a message and sent by way of text message to compatible phones.
Picture messages behave the same as text messages, but pictures take up
more space than text. Pictures are stored in the “Templates” folder under
Menu 01-1-6 (Messages > Text messages > Templates).
Note: You cannot send a picture message through e-mail.
Download pictures
Your phone can download pictures or receive them from compatible phones
to use in messages. You can also create pictures and send them to your
phone or other compatible phones using Nokia PC Suite. See “Nokia PC
Suite” on page 131 for more information.
Note: This function can be used only if it is supported by your
wireless provider. Only phones that offer picture message features
can receive and display picture messages.
Receive a picture message
When you receive a picture message, your phone beeps and Message
received appears in the display as well the message icon (
Press Show to view the picture message, or press Exit or ito move
the message to your inbox.
).
1
[ 59 ]
2
If you have more than one picture message, scroll to the message of
your choice and press Select to view the message.
Note: When you have unopened picture messages in your
inbox,
is shown in the upper left corner of the Start screen
as a reminder.
3
4
Use the scroll keys to view the whole picture if necessary.
Tip: Keep scrolling to view other information, such as the sender
number and time the message was sent.
Once you are finished, press Back to move the picture message to the
Inbox, or press Options for other choices, such as Reply or Forward.
TO SAVE THE PICTURE
If you want to save the picture to your templates folder for later use:
1
2
Press Options, scroll to Save picture, and press Select.
Enter a title for the picture and press OK.
Note: If your templates folder is full of pictures, scroll to the
picture you want to replace and press Select.
Compose and send a picture message
One picture message is equivalent in size to at least three text messages.
When you insert a picture into a message, you will have enough remaining
space for about 121 characters in the message. If you try to insert a
picture into a message that is almost full of text, a beep sounds and you
are prompted to delete some text before proceeding.
1
At the Start screen, press Menu 01-1-1 (Messages > Text messages >
Create message). After a brief pause, the message edit screen appears
in the display.
2
Write a message using the keypad (or enter nothing if you choose to
just send a picture) and press Options.
Tip: Insert pictures before adding text. You can then check
remaining space for text in the upper right corner of the display.
3
Scroll to Insert picture and press Select. A list of pictures appears in
the display.
[ 60 ]
Menu functions
4
5
Scroll to a picture and press View.
Press Insert to insert the picture into your message.
OR
Press Back, scroll to another picture, and press View again.
6
7
To send the picture message, press Options, scroll to Send, and
press Select.
Enter the phone number for your recipient or press Find to retrieve a
number from your contacts list and press OK. The message is sent.
PREVIEW, CHANGE, OR DELETE A PICTURE MESSAGE
1
After a picture has been inserted into your message, press Options at
the message edit screen.
2
Scroll to one of the following options and press Select.
Preview—Previews the inserted message before sending. Press Back
to return to the list of options.
Change picture—Takes you back to the picture list. Scroll to highlight
a new picture, press View, then press Insert to replace the previous
picture in your message.
Delete picture—Press OK to delete the picture from your message, or
press Back to return to the list of options.
• E-MAIL
You can send e-mail up to 160 characters in length to anyone with an
e-mail address.
Important: The e-mail address is included in the total character
count for an e-mail message, which is 160 characters.
Note: You cannot insert pictures into e-mail.
Note: Wireless providers may customize the text message settings
interface. For more details about text message services, please
contact your wireless provider.
[ 61 ]
Write and send an e-mail message
Note: See “Tips for composing a message” on page 56 for ways to
write messages faster.
1
2
At the Start screen, press Menu 01-1-3 (Messages > Text messages >
Create e-mail). After a brief pause, you are prompted to enter the
e-mail address.
Enter the e-mail address or press Find to retrieve an e-mail address
from your contacts list, and press OK.
3
4
Enter a subject for the e-mail and press OK.
Compose your e-mail using the keypad and press Options.
Tip: Be sure and leave enough space in the total character count
(160) for the e-mail address.
5
6
Scroll to Send e-mail, if necessary, and press Select. An E-mail server
number box appears in the display.
If the box in the display is empty, enter the e-mail server number and
press OK.
OR
If the box is in the display is full, edit the number only if you are
sure the number is incorrect and you would like to change the
number, then press OK.
A message appears in the display confirming your e-mail is sent.
Reply to a message or e-mail
When you have received a text message or e-mail,
, the number of
new messages and ___ Message(s) received appears in the display.
Note: The blinking indicates that the message memory is full.
Before you can receive new messages, delete some of your old
messages. See “Delete messages” on page 74 for more information.
Press Show to view the message now or Exit to view it later.
[ 62 ]
Menu functions
READING THE MESSAGE LATER:
1
At the Start screen, press Menu 01-1-2 (Messages > Text messages >
Inbox). After a brief pause, the messages in the inbox are displayed.
2
If more than one message is received, select the message you want to
read and press Select.
An unread text message is indicated by
and an unviewed picture message by
in front of the message,
.
• MULTIMEDIA MESSAGES
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
A multimedia message (MMS) can contain text, images, and MIDI tones.
Your phone has a MMS viewer for playing messages and a multimedia
inbox for storing saved messages. Once you save the MMS, the image can
be used as a screen saver or the sound as a ringing tone.
Your phone supports MMS of up to 45 KB. If the maximum size is
exceeded, the phone may not be able to receive the message. Depending
upon your network, you may receive a message that includes an Internet
address where you can go to view the MMS.
Note: This function can be used only if it is supported by your
wireless provider. Only compatible devices can receive and display
an MMS.
Pictures included in multimedia messages are scaled down to fit the size
of your display.
Note: The default setting of the multimedia message service is on.
Multimedia messaging supports the following formats:
•
•
Picture: JPEG, GIF, PNG, OTA-BMP and WBMP.
Sound: MIDI
Note: If a received message contains unsupported elements, they
may be replaced with the text Object format not supported.
[ 63 ]
Define MMS settings
Before you can use the MMS feature, you need to first define the way you
want to receive the messages.
ALLOW OR NOT ALLOW MULTIMEDIA RECEPTION
You can choose to receive all messages or to receive messages only when
you are in the service provider’s home network.
1
At the Start screen, press Menu 01-5-2 (Messages > Message
settings > Multimedia msgs.).
2
Scroll to Allow multimedia reception and press Select. A list of
options appears in the display:
Yes—Allows all incoming messages.
In home system—Allows incoming messages only if you are in the
service provider’s home system.
No—Blocks all incoming messages.
3
4
Scroll to the option you desire and press Select.
If you selected Yes or In home system in Step 2, scroll to Incoming
multimedia messages, then press Select.
5
Scroll to Retrieve, then press Select.
ALLOW OR NOT ALLOW ADVERTISEMENTS
1
At the Start screen, press Menu 01-5-2 (Messages > Message
settings > Multimedia msgs.).
2
3
Scroll to Allow advertisements and press Select.
Scroll to Yes or No and press Select.
Change MMS settings
Other multimedia settings include saving your messages to the Sent items
folder and editing your connection settings.
[ 64 ]
Menu functions
At the Start screen, press Menu 01-5-2 (Messages > Message
settings > Multimedia msgs.). After a brief pause, a list of options
appears in the display.
1
2
Scroll to an option, and press Select to activate the option or to enter
its submenu.
Message
Setting
Function
Save sent
messages
Saves sent multimedia messages to the Sent
items folder.
Allow
multimedia
reception
Choose Yes, In home system, or No for your
multimedia service. In home system cannot receive
multimedia messages outside the home network.
Incoming
multimedia
messages
Select Retrieve to receive multimedia messages, or
Reject if you do not wish to receive multimedia
messages.
Connection
settings
Define connection settings for retrieving multimedia
messages. Activate the set where you want to save
the connection settings and then edit the settings.
Allow
Enables or disables reception of automatic
advertisements multimedia advertisements.
Edit multimedia connection settings
1
At the Start screen, press Menu 01-5-2 (Messages > Message
settings > Multimedia msgs.).
2
Scroll to Connection settings and press Select.
[ 65 ]
3
Scroll to Edit active multimedia settings and press Select. The
connection settings in the following table appear in the display:
Connection
setting
Function
Settings’ name Rename the setting to your preference.
Homepage
Enter the internet address where your browser
retrieves multimedia messages.
Session mode Select session modes Temporary or Permanent.
Data bearer
Select the data bearer.
Define the access point.
GPRS access
point
IP address
Enter or change the IP address.
Authentication Select from Normal or Secure.
type
User name
Password
Edit or enter your user name.
Edit or enter a password.
4
Scroll to a setting, and press Select to enter the setting submenu.
ABOUT CONNECTION SETTINGS
You may be able to receive multimedia connection settings as a text
message from your wireless provider or they may already be programmed
into your phone. For more information, contact your wireless provider.
SELECT A FONT SIZE FOR YOUR MESSAGES
1
Press Menu 01-5-3-1 (Messages > Message settings > Other
settings > Font size). After a brief pause a list of choices appear
in the display.
[ 66 ]
Menu functions
Scroll to Small font or Large font and press Select. A message
2
appears in the display confirming your selection.
Write and send a multimedia message
For availability and subscription to the multimedia messaging service,
contact your wireless provider.
1
At the Start screen, press Menu 01-2-1 (Messages > Multimedia
msgs. > Create message) and press Select.
2
3
4
5
6
Enter the text of your message and press Options.
Scroll to Insert image and press Select.
From the Gallery menu, scroll to Graphics and press Open.
Scroll to the image of your choice and press Options.
Scroll to Insert and press Select. A confirmation message appears
when the object is added and
appears at the top of the display
screen to indicate that a multimedia message has been created.
7
8
Press Options, scroll to Send to number or Send to e-mail, and
press Select.
Enter the number of the recipient or the e-mail address and press OK.
The message is sent.
Read and reply to a multimedia message
When a multimedia message is being received,
the display. Once the message has been fully downloaded,
Multimedia message received appears in the display.
appears (blinking) in
and
1
To view the message, press Show.
To view the message later, press Exit, then No when asked to discard.
[ 67 ]
2
While viewing the message, press Options. Some or all of the
following options may appear in the display:
Option
Delete
Function
Delete a saved message.
message
Reply
Reply to the message. Press Options and then Send. The
sender’s phone number or e-mail is used as the default.
Forward to no. Forward the message to another number.
Forward to
e-mail
Forward the message to an e-mail address.
Edit
Edit the message. You can only edit messages that you
have written.
Details
View the message subject, size, and class.
Play
Listen to a sound clip in the message, if one is included.
Save a ringing tone, if included, to the gallery.
Save tone
Save image
Save any picture that is attached to your picture
gallery.
3
Scroll to an option and press Select to activate the option or enter
its submenu.
Note: If
blinks and Multimedia memory full, view waiting
msg. appears in the display, memory for multimedia messages is
full. You need to delete some of your old messages. See “Delete
messages” on page 74 for more information.
[ 68 ]
Menu functions
• VOICE MESSAGES
If you subscribe to voice mail, your wireless provider will furnish you with
a voice mailbox number. You need to save this number to your phone to
use voice mail. When you receive a voice message, your phone lets you
know by beeping, displaying a message, or both. If you receive more than
one message, your phone shows the number of messages received.
Save your voice mailbox number
Your wireless provider may have already saved your voice mailbox number
to your phone. If so, the number will appear in the display in Step 2. Press
OK to leave the number unchanged.
1
At the Start screen, press Menu 01-3-2 (Messages > Voice messages >
Voice mailbox number).
2
After a brief pause, the Voice mailbox number screen appears in
the display.
3
4
If the box is empty, enter the voice mailbox area code and number.
Press OK. Your phone confirms the number has been saved.
Tip: Save yourself the trouble of entering the mailbox codes each
time you dial voice mail. For more information, see “Automate
voice mail” later in this section.
Call and setup your voice mail
1
Once you have saved the voice mailbox number, press and hold 1.
2
When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the number in one of four ways:
•
•
•
Dial the number using the keypad.
Press and hold 1.
Press Listen if there’s a notification message in the display.
[ 69 ]
•
Press Menu 01-3-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the voice
mail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers
such as voice mail and then save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voice mail service.
WRITE DOWN SOME INFORMATION
1
2
3
Write down your voice mailbox number.
Call and check your voice mail as you normally would.
Write down your step-by-step interaction with the recorded prompts.
Keep in mind that each voice mail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press
1234, press pound key.
Important: Be precise. You will need this information in “Setup
voice mail with dialing codes” later in this section.
LEARN HOW TO INSERT DIALING CODES
Press srepeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
For example, press sfour times to display the “w” (wait character).
Pause briefly and the wait character is inserted into the dialing string.
Available dialing codes are as follows:
[ 70 ]
Menu functions
*
Bypasses a set of instructions.
+
p
w
Precedes an international telephone number.
Pauses for 2.5 seconds before sending any numbers that follow.
Wait. Your phone waits for you to press hbefore it sends any
numbers or codes that follow.
Setup voice mail with dialing codes
1
At the Start screen, press Contacts, scroll to 1-touch dialing, and
press Select.
2
3
4
Scroll to an empty 1-touch dialing slot and press Assign.
Enter your voice mailbox number, including the area code.
Refer to the dialing codes table on page 70 and enter any codes as
necessary using the information that you wrote down earlier.
For example, if you pause for 5 seconds after connecting to voice mail,
enter p twice after the voice mailbox number, such as 2145551212pp.
5
6
Enter any remaining pauses, PIN codes, and other information that
allows you to listen to your messages, then press OK.
Enter a name (such as Voice mail) and press OK. A message appears
in the display confirming your 1-touch dialing location has been saved.
Now, to dial and listen to your voice mail, just press and hold the
assigned 1-touch dialing key at the Start screen. No other keypresses
should be necessary to connect and listen to your messages.
• MESSAGE OPTIONS
Some or all of the options in the following table are available for text
messages, picture messages, multimedia messages, and e-mail.
1
While viewing a text, picture, multimedia message, or e-mail
press Options.
[ 71 ]
2
Scroll to highlight an option and press Select to activate the option
or enter its submenu:
Option
Delete
Function
Delete the message you are viewing.
Reply
Reply to the message; you have the option to include
the original text in the reply, a template, or empty
screen.
Use detail
Extract numbers, e-mail addresses and website
addresses from the current message.
Forward
Edit
Forward the message to another recipient.
Edit the message.
Move
Move the message to a folder you specify.
Rename the message before it is saved to a folder.
Rename
Copy to
calendar
Copy text from the beginning of the message to your
phone calendar as a reminder note for the current day.
Message
details
View the sender’s name and phone number, the
message center used, reception date and time.
• ORGANIZE MESSAGES WITH FOLDERS
Save messages to folders
You can save messages to an existing folder or to a folder that you have
created.
1
Press Menu 01-1-1 (Messages > Text messages > Create message).
After a brief pause, the message entry screen appears in the display.
2
3
Write your message and press Options.
Scroll to Save message and press Select.
[ 72 ]
Menu functions
4
Scroll to the Archive, Templates, or My folders (if you have created a
folder of your own) and press Select. The message is saved. See “My
folders” on page 73 for information on creating your own folders.
View saved messages
1
2
At the Start screen, press Menu 01-1 (Messages > Text messages).
After a brief pause, scroll to the folder containing the message you
wish to view and press Select.
3
Once the folder opens, scroll to the message you wish to view and
press Select.
Inbox folder
Messages are automatically stored in the inbox after they have been read
or if you press Exit when Message received appears on the Start screen.
Archive folder
Store messages that have been read in the Archive folder.
Templates folder
Pictures and prewritten templates are stored in the Templates folder.
Preloaded templates can be edited/customized.
USE TEMPLATES
1
At the Start screen, press Menu 01-1-6 (Messages > Text messages >
Templates). After a brief pause, the folder opens.
2
Scroll to a template and press Select.
My folders
Keep your messages organized by creating custom folders and saving
some of your messages there.
ADD A FOLDER OF YOUR OWN
1
At the Start screen, press Menu 01-1-7 (Messages > Text messages >
My folders). After a brief pause, the folder opens.
2
3
Press Options. Scroll to Add folder and press Select.
Enter a name for the new folder and press OK. The folder is added.
[ 73 ]
RENAME A FOLDER
Only folders created in My folders can be renamed. The Inbox, Outbox,
Archive, and Template folders are protected.
1
At the Start screen, press Menu 01-1-7 (Messages > Text messages >
My folders). After a brief pause, the folder opens. Any folders that you
have created appear in the display.
2
3
4
Scroll to the folder you wish to rename and press Options.
Scroll to Rename folder and press Select.
Enter the new name for the folder and press OK. The folder is renamed.
DELETE A FOLDER
Only folders created in My folders can be deleted. The Inbox, Outbox,
Archive, and Template folders are protected. When you delete a folder, all
messages in the folder are also deleted.
1
At the Start screen, press Menu 01-1-7 (Messages > Text messages >
My folders). After a brief pause, the folder opens. Any folders that you
have created appear in the display.
2
3
Scroll to the folder you wish to remove and press Options.
Scroll to Delete folder and press Select. You are asked to confirm
the deletion.
4
Press OK to delete or Back to exit. If you pressed OK, the folder
is deleted.
Move a message to a folder
1
2
3
While viewing the message, press Options.
Scroll to Move and press Select.
Scroll to the destination folder and press Select.
• DELETE MESSAGES
If your message memory is full and you have more messages waiting at
the network,
blinks on the Start screen. You can do the following to
create more space:
[ 74 ]
Menu functions
Read some of the unread messages and then delete them.
Delete messages from some of your folders.
•
•
Delete a single message
To delete a single message, you need to open it first.
1
2
3
4
5
Press Menu 01-1 (Messages > Text messages). After a brief pause, a
list of options appears in the display.
Scroll to the folder containing the message you wish to delete and
press Select. A list of messages, if you have any, appears in the display.
Scroll to the message you wish to delete and press Select.
The message opens.
Press Options, scroll to Delete, and press Select. You are asked to
confirm the erasure.
Press OK to delete the message or Back to exit.
Delete all messages in a folder
1
At the Start screen, press Menu 01-1-9 (Messages > Text messages >
Delete messages). After a brief pause, a list of your folders appears in
the display.
2
Scroll to the folder containing the messages you wish to delete and
press Select. You are asked to confirm your request.
Important: If you select All messages, it deletes all messages in
all of the folders.
3
Press OK to empty the folder.
• CHANGE TEXT, E-MAIL, AND PICTURE MESSAGE
SETTINGS
1
At the Start screen, press Menu 01-5-1 (Messages > Message
settings > Text messages).
2
3
Scroll to Sending profile and press Select.
If more than one message profile set is supported by your SIM card,
scroll to the set you wish to change and press Select.
[ 75 ]
Message setting Function
Message center
number
Save the phone number of the message center,
which is necessary for sending text messages;
obtain this number is from your wireless provider.
Messages
sent as
Select the message type: Text, E-mail, Page,
or Fax.
Message validity Define how long the network attempts to send your
messages before it gives up.
Default recipient For text messages, the default number used to
number
send messages.
Delivery reports
Request the network to send delivery reports on
your messages.
Use GPRS
Set GPRS as the preferred method of sending
text messages.
Reply via same
center
Allow the recipient of your message to send you a
reply message by way of your message center
(network service).
Rename sending Change the name of the selected sending profile;
profile
the sending profile sets display only if your SIM
card supports more than one set.
E-mail server
number
The default number used to send e-mail.
OVERWRITE SETTINGS FOR TEXT, E-MAIL, AND PICTURE MESSAGES
When the message memory is full, your phone cannot send or receive any
new messages. However, you can set your phone to automatically replace
old messages in the Inbox and Outbox folders when new ones arrive.
1
Press Menu 01-5-1 (Messages > Message settings > Text messages).
After a brief pause, a list of options appear in the display.
2
Scroll to Overwriting in sent items or Overwriting in inbox and
press Select.
[ 76 ]
Menu functions
3
Scroll to Allowed and press Select to replace the old messages with
new ones in the Sent items or Inbox folder, respectively.
RECEIVE MULTIMEDIA CONNECTION SETTINGS AS A TEXT MESSAGE
You may be able to receive multimedia connection settings as a text
message from your wireless provider. For more information, contact your
wireless provider.
• USE THE INFO MESSAGE SERVICE
With the info message network service, you can receive short text
messages on various topics, such as weather and traffic conditions,
from your wireless provider.
Note: This function can be used only if it is supported by your
wireless provider. For availability, contact your wireless provider.
1
At the Start screen, press Menu 01-4 (Messages > Info messages).
After a brief pause, the list of options in the following table appears
in the display:
Message setting Function
Info service
Select On, Off, or Topic index to activate or
deactivate the service.
Topics
Displays options for selecting, adding, editing, and
deleting info topics.
Language
Select the language in which info messages
are received. The language you select does not
affect the language you select under the phone
settings menu.
Info topics saved Select one or more info topics to save to your
on SIM card SIM card.
2
Scroll to an option and press Select to activate the option or to enter
its submenu.
Note: For more information on topics, contact your wireless provider.
[ 77 ]
Call log (Menu 2)
The call log stores information about the last 20
missed, 20 received, or 20 dialed calls. It also adds
the total duration of all calls. When the number of
calls exceed the maximum, the most recent call
replaces the oldest. For the call log to work properly:
•
•
•
Your wireless provider must support caller ID, and it must be enabled.
Your calls cannot be blocked.
Your phone must be on and within the service area.
• CALL LOG OPTIONS
Whether you are viewing missed, received, or dialed calls, each of the
menu options will be the same. Please refer to the following table
regarding menu options for these features:
Call time
Display the date and time of the call.
Send message Send a message to the number.
View number Display the number.
Edit number Edit the number and associate a name with the number.
Save
Enter a name for the number and save it to your
contacts list.
Add to
contact
Add the number to an existing entry in your contacts
list, if the number is not associated with a name.
Delete
Call
Clear the number from memory.
Call the number.
[ 78 ]
Menu functions
• VIEW MISSED CALLS
Missed calls are calls that were never answered. You can check for missed
calls in two ways:
Note: The missed calls feature does not function while your phone
is off or outside of the service area.
1
2
3
If # missed call appears in the display, press List. The phone number
appears in the display.
Press Options to display the options listed under “Call log options” on
page 78.
Scroll to an option and press Select to activate the option or to enter
its submenu.
OR
1
2
3
a brief pause, a list of missed calls appears in the display (if any exist).
Scroll to a name or number and press Options to display the options
listed under “Call log options” on page 78.
Scroll to an option and press Select to activate the option or to enter
its submenu.
• VIEW RECEIVED CALLS
Received calls are calls that have been answered.
1
At the Start screen, press Menu 2-2 (Call log > Received calls).
After a brief pause, a list of received calls appears in the display
(if any exist).
2
3
Scroll to a name or number and press Options to display the options
listed under “Call log options” on page 78.
Scroll to an option and press Select to activate the option or enter
its submenu.
[ 79 ]
• VIEW DIALED NUMBERS
You can view dialed numbers in one of two ways:
1
appear in the display.
OR
1
At the Start screen, press Menu 2-3 (Call log > Dialed numbers).
After a brief pause, your most recently dialed numbers appear in
the display (if any exist).
2
3
Scroll to a name or number and press Options to display the options
listed under “Call log options” on page 78.
Scroll to an option and press Select to activate the option or enter
its submenu.
Call times
You can receive up to five calls from the same number and view the time
each call occurred. Your clock must be set for this feature to work accurately.
See “Set the clock” on page 86 for instructions on setting your clock.
1
While viewing a missed or received call, press Options, scroll to Call
time, and press Select.
2
3
4
The time that the last call occurred appears in the display.
Press gto view other call times from this number.
Press Back to return to the options list.
• DELETE CALL LISTS
To clear any missed, dialed, or received calls from your phone memory:
1
At the Start screen, press Menu 2-4 (Call log > Delete recent call
lists). After a brief pause, All, Missed, Received and Dialed appear
in the display.
2
Scroll to the call type you want to clear and press Select.
[ 80 ]
Menu functions
• VIEW CALL DURATION
Duration of last call—At the Start screen, press Menu 2-5-1
(Call log > Call timers > Duration of last call). The duration of
your last call appears in the display.
Duration of received calls—At the Start screen, press Menu 2-5-2 (
Call log > Call timers > Duration of received calls). The duration of
all received calls appears in the display.
Duration of dialed calls—At the Start screen, press Menu 2-5-3
(Call log > Call timers > Duration of dialed calls). The duration of
all dialed calls appears in the display.
Duration of all calls—At the Start screen, press Menu 2-5-4
(Call log > Call timers > Duration of all calls). The duration of
all calls (missed, dialed, and received) appears in the display.
Note: The actual time invoiced for calls by your service provider
may vary, depending upon network features, rounding-off for
billing, and so forth.
[ 81 ]
Profiles (Menu 3)
Profiles define how your phone reacts when you
receive a call or a message, how your keypad sounds
when you press a key, and more. Ringing options,
keypad tones, and other settings for each of the five
available profiles can be left at their default setting, or customized to suit
your needs. Select and customize the most suitable profile for your
situation, such as when you are in a meeting or outdoors. The following
profiles are available: Normal, Silent, Meeting, Outdoor, and Pager.
Note: Profiles are also available for enhancements such as the
headset and car kit. See “Enhancement settings” on page 97 for
more information about enhancement profiles.
• SELECT A PROFILE
1
2
3
At the Start screen, press Menu 3 (Profiles) or quickly press the power
key. After a brief pause, the list of profiles appears in the display.
Scroll through the available profiles and press Select once the profile
of your choice is highlighted.
Scroll to Select and press Select.
• CUSTOMIZE A PROFILE
You can customize any of the profiles in a variety of ways.
1
At the Start screen, press Menu 3 (Profiles). After a brief pause, the
list of profiles appears in the display.
2
3
Scroll to the profile you wish to customize and press Select.
Scroll to Customize and press Select.
[ 82 ]
Menu functions
Use the scroll keys to display each of the options in the
4
following table:
Ringing options
Ringing tone
Select the ringing tone style
Select the ringing tone for incoming calls
Set the volume of your ringing tone
Turn the vibrating alert on or off
Select the tone for received messages
Ringing volume
Vibrating alert
Message alert tone
Keypad tones
Set the volume of your keypad tones (or turn
them off)
Warning tones
Alert for
Turn warning and confirmation tones on or off
Define which caller groups the selected profile
will accept or decline. See “Caller groups” on
page 52 for more information.
Profile name
Rename the profile (up to 16 characters)
Note: You cannot rename the Normal profile.
Once you arrive at the option you want to customize, press Select.
5
• SET A TIMED PROFILE
Timed profiles can be used to prevent missed calls. For example, suppose
you attend an event that requires your phone be set to Silent before the
event starts, but you forget to return it to Normal until long after the
event. During this time, you have missed several calls because the ringing
tone was silent. A timed profile can prevent this by automatically
returning your phone to the default profile at a time you specify.
Note: Timed profiles can be set up to 24 hours in advance.
[ 83 ]
1
2
At the Start screen, press Menu 3 (Profiles). After a brief pause, the
list of profiles appears in the display.
Scroll to the profile you wish to activate and set for timed expiration,
then press Select.
3
4
5
Scroll to Timed and press Select.
Enter the time (in hh:mm format) and press OK.
Scroll to am or pm and press Select.
The profile you have set for expiration is now active and appears in
the Start screen along with the
icon.
[ 84 ]
Menu functions
Settings (Menu 4)
You can change certain settings so that your phone
suits your specific needs. Within the settings menu,
you can modify the settings of the right selection
key, time, date, display, enhancements, and more.
You can also restore factory settings, if necessary.
• RIGHT SELECTION KEY SETTINGS
You can change the function of the right selection key (c) on your
phone so that your most frequently used functions can be quickly
accessed from the Start screen.
Choose functions
1
At the Start screen, press Menu 4-1 (Settings > Right selection key
settings). After a brief pause, Select options is highlighted in the display.
2
3
Press Select.
Use the scroll keys (dor g) to highlight the desired function(s)
from the list of available functions.
4
Press Mark. A mark appears in the box next to the selected function
indicating that you have selected the function. (Use Unmark to
remove a function from the list.)
Note: The Contacts function cannot be Unmarked from the list.
5
6
Repeat Steps 3 and 4 to select as many functions as you wish.
Press Done when you have added all desired functions. Save
changes? appears in the display.
7
Press Yes.
On the Start screen, Go to is now the right selection key (c) option.
Selecting Go to displays a list of the functions you selected in Step 4.
[ 85 ]
Organize functions
1
2
3
4
At the Start screen, press Menu 4-1 (Settings > Right selection
key settings).
Scroll to Organize and press OK. The list of selected functions is
displayed.
Use the scroll keys (dor g) to highlight the function you wish to
rearrange and select Move.
Highlight Move up, Move down, Move to top, or Move to bottom
from the list of choices and press Select. The list of functions is
displayed in the new order.
• TIME AND DATE SETTINGS
Set the clock
1
At the Start screen, press Menu 4-2-1 (Settings > Time and date
settings > Clock). After a brief pause, a list of options appears in
the display.
2
3
4
Scroll to Set the time and press Select.
Enter the time (in hh:mm format) and press OK.
Scroll to am or pm and press Select. The time is set.
Show/hide the clock
You have the option of displaying (or not displaying) the clock on the
Start screen.
1
At the Start screen, press Menu 4-2-1 (Settings > Time and date
settings > Clock). After a brief pause, a list of options appears in
the display.
2
Scroll to Show clock (or Hide clock) and press Select.
•
If your clock was previously hidden (not shown on the Start screen),
it will now appear in the upper right corner of the Start screen.
•
If your clock was previously shown in the display, it will now be
hidden from view.
[ 86 ]
Menu functions
Change the time format
You can set the time format for am/pm or 24-hour format (military time).
1
At the Start screen, press Menu 4-2-1 (Settings > Time and date
settings > Clock). After a brief pause, a list of options appears in
the display.
2
3
Scroll to Time format and press Select.
Scroll to 24-hour or am/pm and press Select. A message appears in
the display confirming your selection.
Set the date
1
At the Start screen, press Menu 4-2-2 (Settings > Time and date
settings > Date). After a brief pause, a list of options appears in
the display.
2
3
Scroll to Set the date and press Select.
Enter the date and press OK. The date is set.
Show/hide the date
You have the option of displaying (or not displaying) the date on the
Start screen.
1
At the Start screen, press Menu 4-2-2 (Settings > Time and date
settings > Date). After a brief pause, a list of options appears in
the display.
2
Scroll to Show date (or Hide date) and press Select.
•
If the date was previously hidden (not shown on the Start screen), it
will now appear in the middle of the Start screen.
•
If the date was previously shown in the display, it will now be hidden
from view.
Change the date format
1
At the Start screen, press Menu 4-2-2 (Settings > Time and date
settings > Date). After a brief pause, a list of options appears in
the display.
[ 87 ]
2
3
Scroll to Date format or Date separator and press Select.
Scroll to the format of your choice and press Select. A message
appears in the display confirming your selection.
• CALL SETTINGS
Call forwarding
Call forwarding tells your network to redirect incoming calls to
another number.
Note: Call forwarding is network-dependent and may not work the
same in all networks. Contact your wireless provider for availability.
ACTIVATE CALL FORWARDING
Note: This is a network-dependent feature. All options listed in the
following table may not appear in the display. Contact your wireless
provider for more information.
1
At the Start screen, press Menu 4-3-1 (Settings > Call settings >
Call forwarding). After a brief pause, the forwarding options listed in
the following table appear in the display:
Forward all
voice calls
Forward all calls to the number you specify.
Forward if busy
Forward incoming calls when you are in a call.
Forward if
not answered
Forward incoming calls to another number if
you are unable to answer. You can also set a
delay before forwarding takes place.
Forward if out of
reach
Forward incoming calls when your phone is off.
Forward when not
able to take calls
Forward calls that aren’t picked up. You can
also set a delay before forwarding takes place.
[ 88 ]
Menu functions
Forward all fax calls Forward all fax calls to a fax mailbox.
Forward all data calls Forward all data calls to a data mailbox.
Cancel all
call forwarding
Cancel any call forwarding options you may
have set.
2
3
4
Scroll to the option of your choice and press Select.
Scroll to Activate and press Select.
Scroll to the destination to which your calls will be forwarded
(such as To other no.) and press Select.
5
Enter the number to which your calls, data, or other information will
be forwarded and press OK.
Your phone calls the network to activate the feature you have requested.
The network sends a confirmation note when the feature has been
activated successfully.
CANCEL CALL FORWARDING
At the Start screen, press Menu 4-3-1-8 (Settings > Call settings >
Call forwarding > Cancel all call forwarding). After a brief pause, call
forwarding is canceled and a confirmation message is displayed.
Note: Cancel all call forwarding may affect your ability to receive
voice mail messages. Contact your wireless provider for specific details.
Activate/deactivate anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing
any key except a, b, c, and i.
1
At the Start screen, press Menu 4-3-2 (Settings > Call settings >
Anykey answer). After a brief pause, On and Off appear in the display.
2
Scroll to On (or Off to deactivate) and press Select.
[ 89 ]
Activate/deactivate automatic redial
Occasionally, your network may experience heavy traffic, resulting in a
fast, busy signal when you dial. With automatic redial activated, your
phone redials the number up to 10 times, and notifies you once the
network becomes available.
1
At the Start screen, press Menu 4-3-3 (Settings > Call settings >
Automatic redial). After a brief pause, Onand Off appear in the display.
2
Scroll to On (or Off to deactivate) and press Select.
Activate/deactivate 1-touch dialing
1-touch dialing must be activated before you can make calls using this
method. For information on assigning keys to 1-touch dialing and using
1-touch dialing, see “1-touch dialing” on page 47.
1
At the Start screen press, Menu 4-3-4 (Settings > Call settings >
1-touch dialing). After a brief pause, On and Off appear in the display.
2
Scroll to On (or Off to deactivate) and press Select.
Activate call waiting
If supported by your wireless provider, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or
ignore the incoming call.
ACTIVATE CALL WAITING
1
At the Start screen, press Menu 4-3-5 (Settings > Call settings >
Call waiting) and press Select. After a brief pause, Activate, Cancel,
and Check status appear in the display.
2
Scroll to Activate and press Select.
USE CALL WAITING
•
During a call, press hto answer the waiting call. The first call is put
on hold.
•
Press ito end the active call.
[ 90 ]
Menu functions
Activate/deactivate summary after call
Your phone can display the time spent on a call when you hang up.
1
At the Start screen, press Menu 4-3-6 (Settings > Call settings >
Summary after call). After a brief pause, On and Off appear in
the display.
2
Scroll to On (or Off to deactivate) and press Select.
Send my caller identity with next call
You can prevent your number from being displayed on the receiving
party’s caller ID. This feature is network-dependent and works on a
call-by-call basis. Contact your wireless provider for more information.
1
At the Start screen, press Menu 4-3-7 (Settings > Call settings >
Send my caller identity). After a brief pause, Default, Yes, and No
appear in the display.
2
Scroll to the selection of your choice and press Select. A message
appears in the display confirming your selection.
Select a line for outgoing calls
Note: This is a network-dependent feature. Check with your
wireless provider for availability and a description of the feature.
1
At the Start screen, press Menu 4-3-8 (Settings > Call settings >
Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear
in the display.
Important: If you select Line 2 and have not subscribed to this
network service, you will not be able to place calls. However, calls
on both lines can be answered regardless of the selected line.
2
Scroll to Line 1 or Line 2 and press Select. A message appears in the
display confirming your selection.
Tip: If supported by your SIM card, you can prevent the line
selection by using the Lock option.
[ 91 ]
• PHONE SETTINGS
Set the display language
1
At the Start screen, press Menu 4-4-1 (Settings > Phone settings >
Language). After a brief pause, a list of languages appears in
the display.
2
Scroll to the language of your choice and press Select.
Note: The language setting affects the time and date formats of
the clock, alarm clock, and calendar.
Activate/deactivate automatic Keyguard
Important: When Keyguard is on, it may be possible to dial
emergency numbers (for example, 911 or other official emergency
numbers). Key in the emergency number and press h. The number
is displayed only after you have keyed in the last digit.
You can set the keypad of your phone to lock automatically after a preset
time delay (from 10 seconds to 60 minutes). When the preset delay
expires, the keypad locks automatically.
1
At the Start screen, press Menu 4-4-2 (Settings > Phone settings >
Automatic keyguard). After a brief pause, On and Off appear in
the display.
2
3
Scroll to On (or Off to deactivate) and press Select. If you selected
On, Set delay appears in the display.
Enter the delay (in minutes and seconds) and press OK.
Cell info display
Note: Cell info display is network-dependent and may not work the
same in all networks. Contact your wireless provider for availability.
When this function is selected, your phone will indicate when it is used in
a system cell based on micro-cellular network technology (MCN). MCN
technology increases the capacity of wireless networks in urban areas. The
setting will remain in effect even if the SIM card is changed or the phone
is switched off.
[ 92 ]
Menu functions
1
2
Press Menu 4-4-3 (Settings > Phone settings > Cell info display).
After a brief pause, On and Off appear in the display.
Scroll to On (or Off) and press Select. A message appears in the
display confirming your selection.
Note: If the GPRS connectionis set to Always online, info messages
When needed. See “(E)GPRS” on page 125 for more information.
Welcome note
You can write a welcome note which shows up briefly on your display
whenever you power up your phone.
Note: Predictive text input is unavailable for entering welcome
note text.
1
2
At the Start screen, press Menu 4-4-4 (Settings > Phone settings >
Welcome note). After a brief pause, the message edit screen appears
in the display awaiting text input.
Enter a note (up to 44 characters).
Press sto display and select from available special characters. For
more information on special characters, see “Enter punctuation and
special characters” on page 32.
3
When you are finished, press Options, scroll to Save, and press Select.
(Scroll to Delete and press Select if you want to delete the previous
text and begin writing another note.)
System selection
You may be able to manually search for another network which has a
roaming agreement with your home wireless provider.
1
At the Start screen, press Menu 4-4-5 (Settings > Phone settings >
System selection). After a brief pause, Automatic and Manual appear
in the display.
[ 93 ]
2
Scroll to Automatic or Manual and press Select.
Option
Automatic
Function
Your phone defaults to those settings which have been
preset by your wireless provider.
Manual
Your phone searches for a network which has a
roaming agreement with your wireless provider.
Note: If No system access appears in the display, you will need
to switch to Automatic mode, or insert another SIM card into
the phone.
Confirm SIM service actions
This option allows you to request notification when your service provider
makes changes to SIM-related services (such as activating (E)GPRS
service). For more information on (E)GPRS, see “(E)GPRS” on page 125.
Note: For availability, rates and information on using SIM services,
contact your SIM card vendor, for example, network operator,
service provider, or other vendor.
1
2
Press Menu 4-4-6 (Settings > Phone settings > Confirm SIM
service actions). After a brief pause, Yes and No appear in the display.
Scroll to the selection of your choice and press Select. A message
appears in the display confirming your selection.
Activate/deactivate help text
Your phone displays brief descriptions (help text) for most menu items.
See “Check in-phone help” on page 25 for more information.
Start-up tone
Note: This feature is network-dependent and may not be supported
by your wireless provider. Contact your wireless provider for
more information.
[ 94 ]
Menu functions
You can set your phone to play (or not to play) a start-up tone when the
phone is switched on.
1
At the Start screen, press Menu 4-4-8 (Settings > Phone settings >
Start-up tone). After a brief pause, On and Off appear in the display.
2
Scroll to On (or Off) and press Select. A message appears in the
display confirming your selection.
Memory status
You can view the amount of memory currently used in your phone, as well
as the amount of memory available.
1
At the Start screen, press Menu 4-4-9 (Settings > Phone settings >
Memory status) and press Select.
2
Scroll to Free memory, Used memory, or another feature in the list to
view the current memory used in your phone.
• DISPLAY SETTINGS
Wallpaper
You can set your phone to display a background picture (wallpaper) on
the Start screen. Some preselected pictures are saved in the gallery menu.
You can also receive pictures via multimedia message, download them
from xHTML pages, or transfer them with PC Suite from your PC, then save
them in the gallery. Your phone supports JPEG, GIF, BMP, PNG, and
WBMP formats.
SELECT WALLPAPER
1
2
3
Press Menu 4-5-1 (Settings > Display settings > Wallpaper). After a
brief pause, On, Off, and Change image appear in the display.
Scroll to Change image and press Select to browse the gallery for
another image.
Use the scroll keys (dor g) to browse the image gallery. When you
arrive at the image of your choice, press Options, scroll to Set as
wallpaper, and press Select.
[ 95 ]
4
If Replace current wallpaper? appears in the display, press OK.
A message appears in the display confirming your selection.
ACTIVATE/DEACTIVATE WALLPAPER
1
Press Menu 4-5-1 (Settings > Display settings > Wallpaper). After a
brief pause, On, Off, and Change image appear in the display.
2
Scroll to On (or Off) and press Select.
Color schemes
You can change the color of some display components in your phone, such
as indicators and signal bars.
1
At the Start screen, press Menu 4-5-2 (Settings > Display settings >
Color Schemes). After a brief pause, a list of color schemes appear in
the display.
2
Scroll to the color scheme of your choice and press Select. A message
appears in the display confirming your selection.
Screen saver
The screen saver is activated when no function of the phone is used
after a preset period of time. Press any key to deactivate the screen
saver. The screen saver is also deactivated when the phone is out
of the network coverage area.
You can set your phone to display a screen saver after a preset time or
after a custom time (up to 60 minutes) of your choosing.
1
At the Start screen, press Menu 4-5-4 (Settings > Display settings >
Screen saver timeout). After a brief pause, 2 minutes, 5 minutes, and
Other appear in the display.
2
3
Scroll to 2 minutes or 5 minutes and press Select.
If you want to set a custom time (up to 60 minutes), scroll to Other,
press Select, enter the custom time, and press OK. A message appears
in the display confirming your selection.
[ 96 ]
Menu functions
Display brightness
You can change the brightness of your phone display. See “Adjust display
brightness” on page 29 for more information.
• TONE SETTINGS
You can adjust the ringing volume, keypad tones, and more for the
currently active profile. The options are described in detail under
“Customize a profile” on page 82.
• ENHANCEMENT SETTINGS
The enhancement settings menu and submenus are shown only if the phone
is or has been connected to a compatible enhancement, such as the headset,
car kit, mobile inductive loopset, TTY/TDD device, or music stand.
1
2
At the Start screen, press Menu 4-7 (Settings > Enhancement settings).
Scroll to Headset, Handsfree, Loopset, TTY, or Music stand and
press Select.
Headset
Scroll to the option of your choice and press Select to enter the option
submenu and modify its settings. The following options are available:
•
Default profile—Choose the profile you wish to be automatically
activated when a headset is connected.
•
Automatic answer—Calls are answered automatically after 1 ring
when a headset is connected. Scroll to On or Off and press Select.
Handsfree
Scroll to the option of your choice and press Select to enter the option
submenu and modify its settings. The following options are available:
•
Default profile—Choose the profile you wish to be automatically
activated when your phone is connected to a car kit.
•
Automatic answer—Calls are answered automatically after one ring
when a car kit is connected. Scroll to On or Off and press Select.
[ 97 ]
•
Lights—Choose to keep the phone lights always on, or to shut off
automatically after several seconds. Scroll to On or Automatic and
press Select.
Loopset
Scroll to the option of your choice and press Select to enter the option
submenu and modify its settings. The following options are available:
•
Default profile—Choose the profile you wish to be automatically
activated when a loopset is connected.
•
Automatic answer—Calls are answered automatically after one ring
when a loopset is connected. Scroll to On or Off and press Select.
TTY
WHAT YOU WILL NEED
In addition to the Nokia phone, you will need the following for TTY/TDD
communication.
•
•
A TTY/TDD device that is “cellular ready” or “cellular compatible.”
A cable for connecting the TTY/TDD to your phone, usually supplied by
the manufacturer of the TTY/TDD device.
•
The TTY/TDD Adapter (HDA-10), which can be purchased as an
enhancement at www.nokia.com/us. See “Technical information”
on page 148.
SET UP THE TTY/TDD PROFILE
You can connect your phone to a TTY/TDD using the Nokia TTY/TDD Adapter
(HDA-10). In order for your phone to recognize the TTY/TDD, you will need
to set up the TTY/TDD profile.
Important: Some manufacturers of TTY/TDD devices suggest that
the phone be least 18 inches from the TTY/TDD device. When
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.
[ 98 ]
Menu functions
1
Plug the HDA-10 adapter into the connector on the bottom of your
phone, as shown in the illustration.
18”
2
Press Menu 4-7-4-1 (Settings > Accessory settings > TTY/TDD >
Use TTY).
3
4
Scroll to Yes, then press Select.
Connect the TTY/TDD by a cable to the HDA-10 adapter.
NOTES ABOUT TTY/TDD CALLS
•
The Nokia TTY/TDD Adapter (HDA-10) is for use with compatible
TTY/TDD devices only. Check with the manufacturer of the TTY/TDD
device to ensure that the connection is compatible.
•
•
Check with the manufacturer of the TTY/TDD device for a connecting
cable that is compatible with the Nokia TTY/TDD Adapter (HDA-10).
TTY/TDD communications depend on network availability. Check with
your service provider for availability and description of services.
MAKE A TTY/TDD CALL
1
From the Start screen, enter the number and press h.
2
When the receiving party answers, begin typing your conversation on
the TTY/TDD. Press i to end the call.
RECEIVE A TTY/TDD CALL
1
Make sure the TTY/TDD device is connected to your phone.
2
Press hto answer the call, then type your responses on the
TTY/TDD. Press i to end the call.
[ 99 ]
Music Stand
Scroll to the option of your choice and press Select to enter the option
submenu and modify its settings. The following options are available:
•
•
•
Default profile—Choose the profile you wish to be automatically
activated when your phone is connected to a music stand.
Automatic answer—Calls are answered automatically after one ring
when a music stand is connected. Scroll to On or Off and press Select.
Lights—Choose to keep the phone lights always on, or to shut off
automatically after several seconds. Scroll to On or Automatic and
press Select.
• SECURITY SETTINGS
For information on PIN code request, call restrictions, fixed dialing, and
other security features, see “Manage phone security” on page 35.
• RESTORE FACTORY SETTINGS
You can reset some of the menu settings to their original values.
1
At the Start screen, press Menu 4-9 (Settings > Restore factory
settings). After a brief pause, you are prompted to enter the
security code.
2
Enter the security code and press OK. A message appears in the
display confirming your original settings have been restored.
Note: Any data that you have entered, such as names and
numbers in your contact list will not be deleted.
[ 100 ]
Menu functions
Alarm clock (Menu 5)
The alarm clock is based on the internal clock of
your phone. It sounds an alert for the time you
specify and even works if the phone is off.
• SET AN ALARM
IF AN ALARM HAS NOT BEEN SET
1
At the Start screen, press Menu 5 (Alarm clock). After a brief pause,
you are prompted to enter a time for the alarm.
2
3
Enter the time for the alarm (in hh:mm format) and press OK.
Scroll to am or pm and press Select. Alarm on appears briefly in the
display and
appears on the Start screen.
IF AN ALARM HAS PREVIOUSLY BEEN SET
1
At the Start screen, press Menu 5 (Alarm clock). After a brief pause,
On and Off appear in the display.
2
3
4
Scroll to On and press Select. You are prompted to set the alarm time.
Enter the time for the alarm (in hh:mm format) and press OK.
Scroll to am or pm and press Select. Alarm on appears briefly in the
display and
appears on the Start screen.
TURN OFF AN ALARM THAT HAS BEEN SET
1
2
At the Start screen, press Menu 5 (Alarm clock). After a brief pause,
On and Off appear in the display.
Scroll to Off and press Select. Alarm off appears briefly in the display.
When the alarm sounds
Your phone beeps, vibrates, and the display lights up. Stop and Snooze
appear in the bottom of the display.
[ 101 ]
WITH THE PHONE ON
Press Stop to shut the alarm off.
OR
Press Snooze. The alarm stops for 10 minutes and Snoozing appears in
the display.
Note: If you do not press a key, the alarms stops (snoozes) for
10 minutes, and then sounds again.
WITH THE PHONE OFF
1
When the alarm sounds, press Stop. Switch the phone on? appears
in the display.
Note: The phone will only power up if you select Yes when Switch
the phone on? appears in the display.
2
Press Yes to power up the phone; press No to keep it switched off.
Warning: Do not press Yes when wireless phone use is prohibited
or when it may cause interference or danger.
[ 102 ]
Menu functions
Radio (Menu 6)
To listen to the FM radio on your phone, connect
the Stereo Headset (HDS-3) or Headset Kit (HDB-4)
to the connector on the bottom of the phone. The
leads of the headset function as the antenna, so let
it hang freely.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• TURN THE RADIO ON AND OFF
•
At the Start screen, press Menu 6 (Radio).
•
To quickly turn off the radio, press and hold i.
• USE THE RADIO
Note: When you place or receive a call, the radio automatically
mutes. Once the call is ended, the radio automatically switches
back on.
1
With the radio on, press Options to choose from the options listed in
the following table:
Option
Turn off
Function
Turn off the radio.
Save channel Save the current station to one of 20 locations.
Automatic
tuning
Briefly press either scroll key to start the channel
search up or down. Press OK when a channel is found.
Manual tuning Press dor gto search in increments of 0.1 MHz.
Set frequency Manually enter the frequency of a known radio station.
[ 103 ]
Option
Function
Delete
Delete a saved channel.
channel
Loudspeaker
Listen to the radio through the speakerphone.
(The headset must be connected.)
Mono output/ Listen to the radio in monaural mode. If already in
Stereo output manual mode, Stereo output appears in the display.
2
Press dor gto scroll to an option. Press Select to activate the
option or enter its submenu
Tip: To quickly set the radio frequency, press swith the radio on.
Tip: To manually tune the radio, press pwith the radio on.
Note: When an application using a (E)GPRS connection is sending
or receiving data, it may interfere with the radio.
• SAVE A RADIO CHANNEL
You can save a preset station to any one of 20 locations in memory, and
then tune to that station by simply pressing dor gwith the radio on.
1
With the radio on, press and hold dor gto start the channel
search. Searching stops when a channel is found.
2
To save the channel, press Options, scroll to Save channel, and
press Select.
3
4
Enter a name for the channel and press OK.
Next, scroll to an (empty) location to save the channel and
press Select.
Tip: To quickly save an FM station to a memory location from 1 to 9,
press and hold the corresponding number key while the radio is
playing. Then, enter the name of the channel and press OK.
[ 104 ]
Menu functions
Gallery (Menu 7)
You can save pictures and ringing tones to folders
in the gallery menu, or create folders of your own
and save them there. You can download images
and tones using MMS, xHTML, or Nokia PC Suite.
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• OPEN THE GALLERY
At the Start screen, press Menu 7 (Gallery). After a brief pause, the
submenus in the following table appear in the display.
Option
Function
View folders
Explore the folders in the gallery menu. See “View
folders” in the following section for more info.
Add folder
Add a folder of your own.
Delete folder
Rename folder
Delete a folder you have created.
Rename a folder you have created.
a
Gallery
Use the image and tone downloads in your phone;
see the following for more information.
downloads
a. The phone tries to connect to the Internet using your xHTML browser
and the currently active set of gallery downloads. If the connection fails,
you may need to activate another set or change the current settings. See
“Set up for browsing” on page 134 for more information.
[ 105 ]
• VIEW FOLDERS
1
At the Start screen, press Menu 7 (Gallery), and then press Select.
2
Scroll to View Folders and press Select. A list of folders appears in
the display.
3
4
5
Scroll to a folder, such as Graphics or Tones and press Open.
Scroll through the list of graphics or tones and press Options.
Press Select to activate one of the following options or to enter
its submenu:
Option
Open
Function
Open the selected file.
Send
Create an MMS using the selected file.
Delete the selected file.
Delete
Move
Move the file to another folder.
Rename the selected file.
Rename
Set as
Set the graphic as wallpaper. In the Tones folder, this
wallpaper/Set option is Set as ringing tone; the tone is applied to
as ring tone
profile in use.
Details
View details of the file, such as the name, time and date
the file was created.
Sort
Sort the files according to date, type, name, or size.
[ 106 ]
Menu functions
Organizer (Menu 8)
The organizer menu has many useful features for
organizing your everyday life, including a calendar
and a to-do list.
Note: Your phone must be switched on to
use this function. Do not switch the phone on when wireless phone
use is prohibited or when it may cause interference or danger.
• USE THE CALENDAR
The calendar keeps track of reminders, calls you need to make, meetings,
and birthdays. It can even sound an alarm for any of these events.
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
Open the calendar
At the Start screen, press Menu 8-1 (Organizer >
Calendar).
After a brief pause, the Monthly view appears in
the display with the current date highlighted by a
black box.
Tip: To quickly open the calendar, press e at the Start screen.
MONTHLY VIEW
Monthly view provides an overview of the selected month and weeks. It
also allows you to jump to a specific date. Any days or dates that appear
in bold font contain calendar notes such as a meeting or reminder.
FOUR-WAY SCROLLING
You can move the cursor in some calendar views using the
four-way scroll keys. To move the cursor:
Up, press d
Down, press g
Left, press f
Right, press e
[ 107 ]
Go to a date
1
monthly view appears in the display.
2
3
Press Options, scroll to Go to date, and press Select.
Enter the date (for example, 03/21/2003) and press OK. The monthly
view appears in the display with the “jump date” highlighted.
Make a note for a specific date
You can choose from five types of notes: Meeting, Call, Birthday, Memo,
and Reminder. Your phone asks for further information depending on which
note you choose. You also have the option to set an alarm for any note
that you select.
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
1
Go to the date for which you want to set a reminder. See “Go to a
date” in the previous section if you need more information.
2
3
4
From the monthly view (with the go to date highlighted), press Options.
Scroll to Make a note and press Select.
Scroll to one of the following note types and press Select:
Meeting
Call
Birthday Memo
Reminder
5
Enter your note, press Options, scroll to Save, then press Select.
For a Meeting note, you are prompted to enter a subject, location,
and then a start/end time (in hh:mm format). You are then given the
option to set an alarm.
For a Call note, you are prompted to enter a phone number, a name,
and the time (in hh:mm format). You are then given the option to set
an alarm.
For a Birthday note, you are prompted to enter the person’s name and
year of birth. You are then given the option to set an alarm.
[ 108 ]
Menu functions
For a Memo note, you are prompted to enter a subject and then an
end date. You are then given the option to set an alarm.
For a Reminder note, you are prompted to enter the subject you wish
to be reminded about. You are then given the option to set an alarm.
View calendar notes - the Day view
After you have created some calendar notes, you can view them as follows:
1
At the Start screen, press Menu 8-1 (Organizer > Calendar). After a
brief pause, the monthly view appears in the display with the current
date highlighted. Any dates that contain calendar notes will be in
bold font.
2
3
Use four-way scrolling to go to the date containing the note.
Press Options, scroll to View day, and press Select. Any notes you
have for the day will appear in a list format.
4
To view the body of a highlighted note, press Options, scroll to View,
and press Select.
Options while viewing a list of notes
1
Press Options while viewing the notes of a day to display those
options listed in the following table.
2
Scroll to an option and press Select to activate the option or to enter
its submenu.
View
View the full note.
Make a note Make another note for the selected date.
*Delete
*Edit
Delete the note.
Edit the note.
*Move
Move the note to another date on your calendar.
Enable the note to recur on a regular basis (daily,
weekly, bi-weekly, monthly, and yearly)
*Repeat
Go to date
Jump to another date on your calendar
[ 109 ]
Send the note to another device via Infrared or as a text
message or in vCal format.
*Send note
*Copy
Copy the note. You can then paste the note to
another date.
Set the date and time, date and time format, the day
each week starts, and whether you want your notes to
auto-delete after a specified time.
*Settings
Go to
Takes you to the to-do list for today’s date.
to-do list
*Indicates an option that is available only while viewing the body of
a note (not the header).
• SEND AND RECEIVE CALENDAR NOTES
Send a note using IR or text message
Note: If sending using IR, ensure the other device is set to receive
data using IR. For more information on enabling the IR of the
receiving device, refer to the user guide for the receiving device.
1
2
At the Start screen, press Menu 8-1 (Organizer > Calendar). After a
brief pause, the monthly view appears in the display.
Jump, or scroll to the date containing the note you wish to send.
Tip: Any days containing notes will be in bold font.
3
4
5
6
Press Options, scroll to View day, and press Select.
Scroll to the note you wish to send and press Options.
Scroll to Send note and press Select.
Scroll to Via Infrared, As note, or As text message, and press Select.
If you selected Via Infrared, align the infrared ports of both devices
and press Select. The note is sent.
[ 110 ]
Menu functions
If you selected As note, enter the number for the recipient (or press
Find to retrieve a number from your contacts list), and press OK.
The note is sent.
If you selected As text message, the note appears in the display.
•
•
Press Options, scroll to Send, and press Select.
Enter the number for the recipient (or press Find to retrieve a
number from your contacts list) and press OK. The note is sent.
Receive calendar notes from another device
When you receive a calendar note, your phone displays Calendar note
received. You can then save the note in your calendar and set an alarm
for any date and time.
VIEW RECEIVED CALENDAR NOTES
1
The text of your note appears in the display.
2
Use the scroll keys to view the entire message, if necessary.
SAVE RECEIVED CALENDAR NOTES
1
After viewing the Calendar note, press Options.
2
Scroll to Save and press Select.
DISCARD VIEWED CALENDAR NOTES
1
After viewing the calendar note, press Options.
2
Scroll to Discard and press Select.
• MAKE A TO-DO LIST
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
You can keep track of your tasks with the to-do list feature. You may be
able to save up to 30 notes, depending on their length.
Note: To-do notes are not related to specific dates.
[ 111 ]
Add a to-do note
1
2
At the Start screen, press Menu 8-2 (Organizer > To-do list).
After a brief pause, press Options. If this is your first time to use the
to-do list, Add is highlighted. You can also go to the calendar.
3
4
5
Press Select, enter your to-do note, and press Options.
Scroll to Save and press Select.
Scroll to High, Medium, or Low priority and press Select. The to-do
note is saved.
Options while viewing to-do notes
Press Options while viewing the header of a particular to-do note and the
following options appear in the display:
Header view options Function
View
View the body of a note.
Add
Add another note.
*Delete
Delete the note.
Sort by deadline
*Send
Sort the notes according to their deadline.
Send the note as a text message.
Leave the to-do list and go to the calendar.
Save the to-do note to a date on your calendar.
Edit the content of a note.
*Go to calendar
Save to calendar
*Edit
*Deadline
Set a deadline for the note.
*Mark note
as done
Mark a note or task as complete; no more
reminders will follow.
*Edit priority
Change the priority to high, medium, or low.
* Indicates options that are only available while viewing the body of a
to-do note (not the header).
[ 112 ]
Menu functions
Games (Menu 9)
Not only can you use your phone for communication,
but also for some serious fun. You may be able to
download new games to your phone from a PC with
Java installer software or from some mobile Internet
services. See “Use game downloads” on page 117
for more information.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• LAUNCH A GAME
1
At the Start screen, press Menu 9 (Games). After a brief pause, the
following list of game submenus appear in the display:
Note: Some menus listed in the following table are network-
dependent. Contact your wireless provider for more information.
Submenu
Select game
Function
Select a game or enter a game option list. See “Game
options” on page 114 for more info on game options.
Game
downloads
Connect to game downloads on the Internet using your
xHTML browser.
Memory
Settings
Check the available memory for games and game
related applications.
Turn game sounds, lights, and shakes on or off.
2
Scroll to a submenu and press Select to enter the submenu and
choose other settings.
[ 113 ]
Play a game
1
At the Start screen, press Menu 9-1 (Games > Select game). After a
brief pause, a list of games appears in the display.
2
Scroll to a game and press Options or press hto quickly launch
the game.
If the selection is a single game it will launch. Otherwise, a list of games
within the selected game set appears in the display. To launch a single
game, scroll to the desired game and press h.
3
Choose one of the following options on the game submenu and
press Select:
Choose New game to begin playing a new game.
Choose High score to view previous high scores.
Choose Instructions to get instructions for playing the game.
Tip: If a game uses the whole display area, selection keys such as
Options or Back will not appear in the display. Press eto show the
options keys Select or Back (returns to the game).
Game options
1
While viewing the games list, press Options to display those listed in
the following table:
Option
Open
Function
Play the game.
Delete
Delete the game.
Web access
Check version
Details
Options for restricting network access.
Display the version of the highlighted game.
Display details of the game.
2
Scroll to an option and press Select to activate the option or enter
its submenu.
[ 114 ]
Menu functions
Applications (Menu 10)
With the applications menu you can manage the
Java applications installed on your phone, or those
that may be offered by your wireless provider.
Note: The phone must be switched on to use
this function. Do not switch on the phone when the use of a
wireless phone is prohibited or when it may cause interference
or danger.
Note: This feature uses shared memory. See “Shared memory” on
page 12 for more information.
• LAUNCH AN APPLICATION
1
At the Start screen, press Menu 10-1 (Applications > Select
application). After a brief pause, one or more applications
appear in the display.
2
Scroll to an application or an application set and press Options, or
press h. If the selection is a single application it will be launched.
Otherwise, a list of applications in the selected application set
is displayed.
3
To launch a single application within the set, scroll to the desired
application and press Options, then press Select or h.
Application options
1
While viewing the applications list, press Options to display those
listed in the following table:
Option
Open
Delete
Function
Opens the selected application or application set.
Delete the application or application set from
your phone.
[ 115 ]
Option
Function
Web access
Provides options for restricting network access:
Ask first (ask for network access)
Allowed (allow network access)
Not allowed (to not allow network access)
Update
version
Check if a new version of the application is available
for download.
Web page
Provides further information or data for the
application from an Internet page; This feature is
network-dependent, and only appears if an Internet
address has been provided with the application.
Details
Shows additional information about the application.
2
Scroll to an option and press Select to activate the option or enter
its submenu.
• DOWNLOAD APPLICATIONS
You can download new Java applications in different ways.
Use application downloads
1
At the Start screen, press Menu 10-2 (Applications > App. downloads).
After a brief pause, the list of available xHTML bookmarks appears in
the display.
Note: This feature is network-dependent. Contact your wireless
provider for more information.
2
3
Scroll to More bookmarks (if necessary) and press Select to access
the list of xHTML bookmarks in your Services menu.
Scroll to the appropriate bookmark that contains the application
you wish to download and press Select to connect to the xHTML page.
See “Navigate the wireless Internet” on page 135 for information on
browsing xHTML pages.
[ 116 ]
Menu functions
Use game downloads
At the Start screen, press Menu 9-2 (Games > Game downloads).
After a brief pause, your phone connects to the xHTML pages using
the currently active set of xHTML settings.
Note: If the connection fails, you may enter the Services menu
and activate another set of service settings. See “Use browser
options” on page 134 for more info on browser settings.
Use PC Suite
Use the Nokia Application Installer from PC Suite to install Java applications
from the PC to the phone. For more information on PC Suite, see “Nokia
PC Suite” on page 131.
Note: Nokia does not warrant applications from non-Nokia sites.
If you choose to download applications from non-Nokia sites, take
precautions for security or content.
Note: When you download a game or an application, it may be
saved in the Games menu instead of the Applications menu.
• VIEW APPLICATION MEMORY STATUS
You can view the size of memory available for game and application
installations.
At the Start screen, press Menu 10-3 (Applications > Memory). After a
brief pause, the amount of free memory appears in the display.
[ 117 ]
Extras (Menu 11)
With the extras menu you can manage the
calculator, voice recorder, and voice command
features installed on your phone, or those that
may be offered by your wireless provider.
• USE THE CALCULATOR
The calculator in your phone adds, subtracts, multiplies, divides, counts
the square and the square root, and converts currency values.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Note: Calculator has a limited accuracy and rounding errors may
occur, especially in long division.
1
2
3
Press Menu 11-1 (Extras > Calculator). After a brief pause, the
calculator screen appears in the display.
Enter the first number in the calculation. (Press pfor a decimal point
if necessary.)
Press srepeatedly to cycle through the add (+), subtract (-), multiply
( ), and divide (/) characters. Pause briefly to select the currently
*
displayed character.
Note: To perform a square or square root calculation, press
Options, scroll to Square or Square root and press Select.
4
5
6
Enter the second number in the calculation.
Press Options. Equals is highlighted.
Press Select. The result of your calculation appears in the display.
[ 118 ]
Menu functions
• USE THE CURRENCY CONVERTER
You can convert foreign currency to domestic, or vice versa directly from
the Start screen.
1
2
At the Start screen, enter a currency amount to convert.
Press Options, scroll to one of the following and press Select:
To home
To foreign
Converts foreign currency to domestic currency
Converts domestic currency to foreign currency
If you have not done so already, you are prompted to enter the
exchange rate.
3
Enter the exchange rate and press OK. (Press pto insert a decimal.)
The converted amount appears in the display.
EDIT THE EXCHANGE RATE
1
At the Start screen, press Menu 11-1 (Extras > Calculator). After a
brief pause, the calculator screen appears in the display.
2
Press Options (Exchange rate is highlighted), then press Select and
scroll to one of the following options:
Foreign units converted to Enter the number of home units it takes to
home units make one unit of foreign currency
Home units converted to Enter the number of foreign units it takes
foreign units to make one unit of your home currency
3
4
Press Select to edit your choice.
Enter the exchange rate and press OK. The exchange rate is saved.
[ 119 ]
• VOICE RECORDER
This feature allows you to record pieces of speech or sound with your
phone and listen to them later. You can record information such as phone
numbers and personal memos, but the voice recorder can also record an
active phone conversation. The total available time is 90 seconds if no
memos have been stored. The maximum length of a recording depends on
how much memory remains available. The length of time remaining for a
current recording will be displayed on your phone screen.
Note: Obey all applicable laws governing recording of calls. Do not
use this feature illegally.
Record speech or sound
1
2
3
4
5
At the Start screen, press Menu 11-2 (Extras > Voice recorder).
Scroll to Record and press Select.
After the recorder start tone is heard, begin recording speech or sound.
When you are finished recording, press Stop.
Enter the title you wish to assign to the recording and press OK.
Record while in a call
1
While in a call, press Options, then select Record.
After the recorder start tone is heard, the recorder begins recording
the phone conversation. Also, the recorder recording tone will play
every 5 seconds to remind the other person on the call that the
conversation is being recorded.
2
When you are finished recording, press Stop. The recording is saved
to the recordings list.
View recordings list and play recordings
1
At the Start screen, press Menu 11-2-2 (Extras > Voice recorder >
Recordings list).
2
From the Recordings list menu, select the recording you would like to
play, press Options, then select Playback or Play via speaker. End the
playback by selecting Stop.
[ 120 ]
Menu functions
Delete a recording
From the Recording list menu, select the recording you want to delete,
press Options, then select Delete.
Edit a recording title
To change the title of a recording, select a recording, then select Options
and choose Edit title.
Setting the voice memo alarm
To attach an alarm to a recording, select a recording, then select Options
and choose Add alarm.
• VOICE COMMANDS
The voice command feature allows handsfree operation of certain phone
features. Voice commands work similar to voice dialing, see “Voice dialing”
on page 49 for more information. Before using voice commands, you must
first associate a “voice tag” to the phone function. You can set as many
as 5 voice commands.
View available functions
At the Start screen, press Menu 11-3 (Extras > Voice commands) and
scroll through the following list of functions:
Phone feature Feature options
Profiles
Normal, Silent, Meeting, Outdoor, and Pager
Voice mailbox Check your voice messages.
Radio
Radio on, Radio off, Next channel, and Previous channel
Infrared
Recorder
Activate infrared.
Record speech or sound.
Audible alerts Audible battery bar and Audible signal bar
[ 121 ]
Add a voice tag for the command
1
2
3
4
5
Press Menu 11-3 (Extras > Voice commands).
Scroll to the phone function you wish to tag, then press Select.
Scroll to an option associated with that function, then press Select.
Press Options, then select Add command.
Press Start, then speak the voice tag clearly into the microphone.
Note: Do NOT press Quit unless you want to cancel the recording.
The phone replays and then saves the recorded tag. The
next to commands which have voice tags assigned.
icon appears
Activate a voice command
After you have associated a voice tag with a phone function, you can issue
a command by speaking the voice tag. There are three ways to activate a
voice command:
1
If you have the optional headset attached, press and hold the
headset button.
OR
Press and hold Contacts (or Go to).
OR
Press and hold the volume down key.
2
When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the phone plays
the recognized voice tag from the phone memory through the
earpiece. The function you requested is then activated.
[ 122 ]
Work with an existing voice command
After you have associated a voice tag to a command, you can choose one
of the following options:
•
•
•
Select Playback to listen to the voice command tag.
Select Change to change the voice command.
Select Delete to erase the voice command tag.
Audible alerts
Audible alerts use a series of beeps to inform you of the current signal
strength or battery level of your phone.
Note: In order to obtain audible alerts, the alerts must first be set
up as voice commands. To set up voice commands, see “Add a voice
tag for the command” on page 122.
Set up audible alerts
1
2
If you have the optional headset attached, press and hold the
headset button.
OR
Press and hold Contacts (or Go to).
OR
Press and hold the volume down key.
When Please speak now appears, pronounce the voice tag clearly into
the microphone.
When the phone finds the tag, Found appears, and the phone plays
the recognized voice tag from the phone memory through the earpiece
The phone then beeps, according to the strengths indicated in the
following table:
Audible alert
Battery bar strength Low
Signal bar strength Weak
One beep Two beeps Three beeps Four beeps
Half-full Almost full Full
Moderate Strong Strongest
[ 123 ]
Connectivity (Menu 12)
You can make a serial connection between your
phone and a PC using the DKU-5 data cable, which
is available for purchase as an enhancement. Once
you establish this connection, you can access phone
information from your PC, or use your phone as a
wireless modem. It may also be possible to make this same serial connection
between your phone and an IR-equipped laptop or IR-equipped desktop
PC using the infrared port of your phone.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• INFRARED
You can set up the phone to receive data through its IR port. To use an IR
connection, transmission and reception must be to or from an infrared
compatible phone or device. You can send or receive data such as business
cards and calendar notes to or from a compatible phone or data device
(such as a computer) through the IR port of your phone.
Important: Do not point the IR beam at anyone's eye or allow it
to interfere with other IR devices.
SEND AND RECEIVE DATA USING IR
•
Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices. The preferable distance
between the two devices in an
infrared connection is from 3 inches
to 3 feet.
3 ft. maximum
distance
[ 124 ]
Menu functions
•
•
Activate IR in your phone by pressing Menu 12-1 (Connectivity >
Infrared) at the Start screen.
The user of the other device should activate IR as well.
If data transfer is not started within two minutes after the activation of
the IR port, the connection is cancelled and has to be started again.
IR CONNECTION INDICATOR
•
When
your phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device
or a connection has been lost.
is shown continuously, the IR connection is activated and
•
Using data communication applications
For information on using a data communication application, refer to the
documentation provided with the application.
If you use an IR connection, activate the IR connection in your phone by
pressing Menu 12-1 (Connectivity > Infrared). Also, make sure that the
connection is active in your PC.
If you use the DKU-5 data cable:
1
Connect the cable to the USB port on the back of your computer and
to the connector on your phone.
2
Start using the data communications application on the computer.
Note: Making or answering phone calls during a computer
connection is not recommended as it might disrupt the operation.
For better performance during data calls, place the phone on a stationary
surface with the keypad facing downward. Do not move the phone by
holding it in your hand during a data call.
• (E)GPRS
General packet radio service (GPRS) is a technology used to send and
receive data in short bursts or packets over the wireless network. With
GPRS, you can stay connected to the Internet and allow faster downloads
without completing a dial-up connection. Applications using GPRS
[ 125 ]
include the xHTML browser, Java applications, MMS, and dial-up
connections for making digital data calls.
Enhanced general packet radio service (EGPRS), also known as enhanced
data rates for global revolution (EDGE), may also be available. EGPRS/
EDGE technology works just like GPRS, but the connection is roughly 2-3
times faster.
Note: In order to use (E)GPRS for dial-up connections, you must
first subscribe to the (E)GPRS network service. Contact your
service provider for details on pricing and availability.
Some service providers may have already set up information for
your (E)GPRS dial-up connection.
(E)GPRS dial-up connections
When you use your Nokia phone as a wireless modem, you have the option
of enabling (E)GPRS connectivity from your PC or laptop computer.
For more information, see the Nokia PC Suite and PC/PDA Connectivity
Guide. This document can be downloaded from the Nokia website at
http://www.nokia.com/us.
(E)GPRS icons
The following icons appear on the screen to show you the status of your
(E)GPRS connection.
Appears in the upper left corner of the screen. Indicates an
active (E)GPRS connection, for example, when you are using
the xHTML browser.
Appears in the upper left corner of the screen. Indicates you
are registered to a (E)GPRS network, but the (E)GPRS
connection is not currently active.
Indicates that circuit switched (CS) or voice calls are not
possible when using (E)GPRS.
Indicates that the (E)GPRS connection has been interrupted
by a voice call.
[ 126 ]
Menu functions
Set up an automatic connection
Some service providers may have customized the options on the services
menu. Contact your service provider for more information if the options
shown here are not available.
Important: (E)GPRS may not be available in all wireless networks.
The establishment and continuation of a (E)GPRS and Internet
connection depends on network availability, service provider
support, and signal strength.
1
2
At the Start screen, press Menu 12-2-1 (Connectivity > GPRS >
GPRS connection). After a brief pause, the following options appear
in the display.
Scroll to one of the following options and press Select to activate
the option:
When needed—The (E)GPRS connection is established when you use
the xHTML browser and is closed when you exit the xHTML browser.
Always online—The phone is automatically registered to a (E)GPRS
network when you turn your phone on. When you use the xHTML
browser, the connection between your phone and the network is
created and data transfer is possible. When you exit the xHTML
browser, the (E)GPRS connection ends but the registration to the
(E)GPRS network remains.
Receive a call while online
If you are using the xHTML browser over (E)GPRS, you can still receive a voice
call. Your data call is put on hold and you can choose to answer the call.
•
•
To answer the incoming call, press h.
To reject the incoming call, press i.
Note: After you end your voice call, the (E)GPRS connection
automatically resumes.
[ 127 ]
Make a call while online
When you are browsing an xHTML page and want to make a call, you can
select Use number. Your phone searches the information on the xHTML
page for a string of numbers. You then choose from the number or
numbers displayed to place the call.
An alternate way is to press ito disconnect from the Internet, then
place your call by searching the contacts list for a name and number or
by keying in the phone number.
Make an emergency call while online
If you are using (E)GPRS to connect to the Internet, you can end your data
connection and then make an emergency call.
1
2
To close your Internet connection, simply press i.
Enter the emergency number for your present location (for example,
911 or any other official emergency number).
3
Press h.
• SYNCHRONIZATION
You can synchronize the calendar and contacts list information in your
phone with a remote Internet server or a compatible PC.
Note: The contacts list in your SIM card will not be synchronized.
Note: This feature must be supported by your service provider.
For more information on availability and synchronization service
settings, contact your service provider.
Save synchronization settings
You may receive the synchronization settings as a text message or may
need to enter the synchronization settings manually. If you do not receive
the synchronization setting as a text message, see “Save settings manually”
on the following page for more information.
[ 128 ]
Menu functions
SAVE SETTINGS WHEN RECEIVED AS A TEXT MESSAGE
When you receive the synchronization settings as a text message,
Synchronization settings received is displayed.
Press Options and select:
•
•
•
Details to view the received settings first.
Save to save the synchronization settings.
Discard to discard the synchronization settings.
SAVE SETTINGS MANUALLY
You need to activate the set where you want to save the synchronization
settings. A set is a collection of settings required to make a connection to
a service.
1
At the Start screen, press Menu 12-3-2-1 (Connectivity >
Synchronization > Settings > Active Internet sync. settings).
2
3
Scroll to the set you wish to activate and press Activate.
Scroll to Custom. active Internet sync. settings and press Select.
Select each setting from the following table and key in the
required settings.
Settings’ name
Rename the synchronization setting and press OK.
Data to be
synchronized
Select All (contacts and calendar), Contacts, or
Calendar and press Done.
Database addresses Select Contacts database and/or Calendar
database, key in the name of the database,
and press OK.
User name
Key in the user name and press OK. (Contact your
service provider, if necessary, for this information.)
Password
Key in the password and press OK. (Contact your
service provider, if necessary, for this information.)
Synchronization
server
Key in the name of the server and press OK.
[ 129 ]
Synchronize from your phone
If you have saved data in the remote Internet server, you can synchronize
have customized and selected the appropriate synchronization settings,
you are ready to synchronize data. (See “Save synchronization settings”
on page 128 for more information.)
1
At the Start screen, press Menu 13-5 (Services > Settings) and
press Select.
2
3
Scroll to Active service settings and press Select.
Select the connection settings you need for synchronization.
Note: The synchronization settings may differ from the service
settings required for xHTML browsing. After synchronizing, change
your Active service settings back to the previous ones if you want
to use other xHTML services later.
4
5
Mark the data to be synchronized. See “Save settings manually” on
page 129 for more information.
At the Start screen, press Menu 12-3-1 (Connectivity >
Synchronization > Synchronize). Synchronization begins.
Depending on the type of connection you are using to synchronize
data, connecting or initializing messages may appear.
Note: Synchronizing for the first time or after an interrupted
synchronization may take time up to 30 minutes, if the contacts
list or calendar are full.
STOP SYNCHRONIZATION
1
To stop synchronization press Quit or i. The Quit synchronization?
message appears.
2
Press OK.
HANDLING CALLS DURING SYNCHRONIZATION
During synchronization, outgoing calls are not possible. Incoming calls
can still be received, and can be handled in one of the following ways:
[ 130 ]
Menu functions
To reject the incoming call, press i(synchronization continues)
•
•
To answer the incoming call, press h(synchronization is interrupted
and a Synchronization suspended message appears)
Note: Once the incoming call is ended, a Start synchronization
again? message appears. Selecting Yes starts synchronization over
again, from the beginning.
Synchronize from your PC
You can synchronize the data in the contact list and calendar in your phone
to correspond with the data of your PC by starting the synchronization from
your PC.
To synchronize the contact list and calendar from your PC, use either an
IR connection or a data cable. You will also need the PC Suite software for
your particular phone (see “Nokia PC Suite” in the next section
for details).
Start the synchronization from your PC using Nokia PC Suite. After
synchronizing, the data in the phone and in the PC are the same.
• NOKIA PC SUITE
Once your phone is connected to your PC, you can use the following
features of Nokia PC Suite:
•
•
•
•
Nokia Application Installer allows you to install Java applications
from your PC to your phone.
Nokia Image Converter allows you to convert and optimize graphics for
use in MMS messages or for creating desktop wallpaper for your phone.
Nokia Sound Converter allows you to convert General MIDI files for
use with MMS messages and as ringing tones for your phone.
Nokia Content Copier allows you to copy data between two Nokia
phones, backup phone data to your PC (then restore the data back to
your phone), and erase data from your phone.
[ 131 ]
•
Nokia Connection Managerallows you to monitor the serial connection
between your phone and PC and switch to a different type of connection
(cable, IR, Bluetooth) when copying data from one phone to another.
•
•
Nokia Phone Editor allows you to edit your phone book and settings
from your PC.
Nokia PC Sync allows you to synchronize contacts, calendar, and
to-do list items between your phone and PIM applications such as
Microsoft Outlook and Lotus Organizer.
•
•
Nokia Phone Browser allows you to browse the contents of your
phone using Windows Explorer or My Computer.
Nokia WAP Manager allows you to manage WAP bookmarks and
settings.
For more information, refer to the Nokia PC Suite and PC/PDA Connectivity
Guide for installation and setup instructions.
Note: The Nokia PC Suite and PC/PDA Connectivity Guide, Nokia
PC Suite, and all related software can be downloaded from the U.S.
Mobile Phone products section of www.nokia.com/us.
[ 132 ]
Menu functions
Services (Menu 13)
Your phone has a built-in browser you can use to
connect to selected services on the Internet. You
can view weather reports, check news or flight
times, view financial information, and much more.
Note: This feature is network-dependent.
Contact your wireless provider for more information.
Note: Your phone must be switched on to use this function. Do not
switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• NOTES ON WIRELESS INTERNET ACCESS
This section gives a brief overview of wireless Internet technology.
Technology background
XHTML
A technology called HyperText Markup Language (xHTML) is to mobile
devices what the World Wide Web (WWW) is to personal computers.
xHTML is a relatively new development that provides access to the
Internet for mobile users.
Today, most xHTML sites are made up of text and hyperlinks. Some pages
even contain low-resolution graphics, or require data input. Your service
provider and others are free to design xHTML sites as they choose, so the
sites are as variable as Web pages on the Internet.
Internet content on your personal computer is called a web page. Internet
content on your mobile phone is called a page, or xHTML card.
The wireless service provider’s role
Because wireless Internet content is designed to be viewed from your
phone, your wireless service provider now becomes your “wireless Internet
service provider” as well.
[ 133 ]
Your wireless provider has probably created a home page and set up
your browser to go to this page when you log on to the Internet. Once at
your service provider’s home page, you may find links to a number of
other sites.
Set up for browsing
It should not be necessary to manually configure the browser on your
phone. Normally this is done by your wireless provider once you have
subscribed to the feature. Contact your wireless provider if you have
problems using the browser.
• SIGN ON TO THE WIRELESS INTERNET
Press Menu 13-1 (Services > Home). After a brief pause, your phone
attempts to connect to your wireless provider’s home page.
OR
At the Start screen, press and hold 0.
Your phone connects to the Internet and to your service provider’s
home page.
If you see the Check service settings message, the phone may not be set
up for browsing. Contact your wireless provider to make sure that your
phone is configured properly.
• USE BROWSER OPTIONS
The Services menu gives you the options shown in the following table:
Choice
Home
What it does
Starts the browser and takes you to your service
provider’s home page.
Bookmarks Shows a list of all saved bookmarks. Bookmarks help you
find an xHTML site quickly.
[ 134 ]
Menu functions
Choice
What it does
Download Allows you to download content from pre-programmed
links
xHTML sites.
Service
inbox
Allows you to receive notifications from your service
provider about new e-mail messages, changes in stock
prices, and so on.
Settings
Provides options for changing connection settings,
appearance settings, cookie settings, and certificates.
Go to
Accepts an address you enter.
address
Clear the
cache
Empties the temporary memory of the browser. It is
advisable to empty the cache at the end of each session.
Note: Some wireless providers may have customized the options
on the Services menu. Contact your wireless provider for more
information if any of the options are not available.
• NAVIGATE THE WIRELESS INTERNET
Since your phone screen is much smaller than a computer screen, Internet
content is displayed differently than you may be accustomed to seeing.
This section contains guidelines for using phone keys to navigate a xHTML
site and examples of how to read an xHTML site.
General guidelines for using the phone keys
•
•
•
•
Use the four-way scroll keys to browse the xHTML site.
To select a highlighted item, press h.
To enter letters and numbers, press the keys 0through 9.
To enter special characters, press the skey.
[ 135 ]
Examples of wireless Internet sites
The following illustrations show most of the elements you may find on a
wireless Internet site. These are examples only.
1) Header line shows the
1)
2)
3)
current Internet site.
2) Active link appears as a
highlighted word.
3) Inactive link appears as an
underlined word.
Scroll through the list of links
using dor g.
4) Selection list: Brackets [ ]
appear when you have the
option to enter information.
5) Options: Press Options to
go to the site menu and/or
browser page.
4)
6)
5)
6) Back: Press Back to return
to the previous page.
7) Data entry field: Brackets
[ ] that enclose dots indicate
when you need to enter
information. Inthis example,
you can enter your zip code
to receive the local weather
forecast.
7)
[ 136 ]
Menu functions
• USE BOOKMARKS
You can save addresses for your favorite sites as bookmarks. A bookmark
helps you find a site again, just as a slip of paper helps you find a page in
a book. You can add up to 30 bookmarks to your browser.
Set a bookmark while browsing
1
Press Menu 13-2 (Services > Bookmarks). After a brief pause, a list
of bookmarks (if any) appear in the display.
2
3
4
Press Options, scroll to New bookmark (if necessary), and press Select.
Enter an address for the bookmark and press OK.
Enter a title for the bookmark and press OK. A message appears in the
display confirming your bookmark is saved.
Disconnect from the Internet
To quit browsing and end the connection, press Options and select Quit.
When the Quit browsing? message appears, press Yes.
OR
Press i. If GSM data is the selected data bearer, then press itwice.
• SECURITY ISSUES
Note: The information or services you have accessed are stored in
the cache of your phone. A cache is a buffer memory, which is used
to store data temporarily. If you tried to access or have accessed
confidential information requiring passwords (for example, your
bank account), empty the cache of your phone after each use.
Clear the cache
Clearing the cache will empty the browser’s temporary memory. It is
advisable to empty the cache at the end of each browsing session.
Press Menu 13-7 (Services > Clear the cache). After a brief pause, the
cache is cleared and a confirmation message displays.
[ 137 ]
About authority certificates
To use some xHTML services, such as banking services, you need an
authority certificate. Using the certificate can help you to improve the
security of connections between your phone and an xHTML server.
You can download the certificate from an xHTML page if the xHTML
service supports the use of authority certificates. After the download, you
can view the certificate, then save or delete it. If you save the certificate,
it is added to the list of certificates in the phone.
Your phone alerts you if the identity of the xHTML server or xHTML
gateway cannot be verified or is not authentic.
VIEW THE LIST OF AUTHORITY CERTIFICATES
1
2
3
4
Press Menu 13-5 (Services > Settings).
Scroll to Certificates and press Select.
Scroll to Authority certificates and press Select.
Scroll to Certificate list and press Select. The list of authority
certificates is displayed.
[ 138 ]
Reference information
9 Reference information
This section provides information about your phone battery, enhancements,
chargers, safety guidelines, and technical information. Be aware that the
information in this section is subject to change as batteries, chargers, and
enhancements change.
Check the model number of any charger before use with this device.
This device is intended for use when supplied with power from ACP-12
and LCH-9.
Warning: Use only batteries, chargers, and enhancements that
have been approved by the phone manufacturer. The use of any
other types could invalidate any approval or warranty applying to
the phone and could be dangerous.
For availability of approved enhancements, please check with your dealer.
• BATTERY STATEMENTS
Charging and Discharging
Your phone is powered by a rechargeable battery.
Note that a new battery’s full performance may be achieved only after
two or three complete charge and discharge cycles!
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the operating time (talk time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge your
battery only with the chargers approved by the manufacturer. Unplug the
charger when not in use. Do not leave the battery connected to a charger
for longer than a week, since overcharging may shorten its lifetime. If left
unused, a fully charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge;
allow it to cool down or warm up first.
Use the battery only for its intended purpose.
[ 139 ]
Never use any charger or battery which is damaged or worn out.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip, or pen) causes direct connection of the
+ and - terminals of the battery (metal strips on the battery), for example,
when you carry a spare battery in your pocket or purse. Short-circuiting
the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer
or winter conditions, will reduce the capacity and lifetime of the battery.
Always try to keep the battery between 59°F and 77°F (15°C and 25°C). A
phone with a hot or cold battery may temporarily not work, even when
the battery is fully charged. Batteries' performance is particularly limited
in temperatures well below freezing.
Do not dispose of batteries in a fire!
Dispose of batteries according to applicable local regulations
(for example, recycling). Do not dispose of as household waste.
• USE PROPER CARE AND MAINTENANCE
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and to enjoy this product for many years:
•
•
•
•
Keep the phone and all its parts and enhancements out of the reach
of small children.
Keep the phone dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas. Its moving parts
can be damaged.
Do not store the phone in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
•
Do not store the phone in cold areas. When it warms up (to its normal
temperature), moisture can form inside which may damage electronic
circuit boards.
[ 140 ]
Reference information
•
•
Do not attempt to open the phone. Nonexpert handling may damage it.
Do not drop, knock, or shake the phone. Rough handling can break
internal circuit boards.
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the phone.
Do not paint the phone. Paint can clog the moving parts and prevent
proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage
the phone and may violate regulations governing radio devices.
All of the above suggestions apply equally to your phone, battery, charger
or any enhancement. If any of them are not working properly, take them
to your nearest qualified service facility. The personnel there will assist
you, and if necessary, arrange for service.
• UNDERSTAND IMPORTANT SAFETY INFORMATION
Traffic Safety
Do not use a handheld telephone while driving a vehicle. Always secure
the phone in its holder; do not place the phone on the passenger seat or
where it can break loose in a collision or sudden stop.
Remember road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden to use it, or when
it may cause interference or danger.
Use the phone only in its normal operating positions.
Electronic devices
Most modern electronic equipment is shielded from radio frequency
(RF) signals. However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
[ 141 ]
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of
6 inches (20 cm) be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research. Persons
with pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from their
pacemaker when the phone is switched on
•
•
Should not carry the phone in a breast pocket
Should use the ear opposite the pacemaker to minimize the potential
for interference.
•
If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones,
may interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy or if
you have any questions. Switch off your phone in health care facilities
when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (for example, electronic fuel
injection systems, electronic antiskid/antilock braking systems, electronic
speed control systems, air bag systems). Check with the manufacturer or
its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
[ 142 ]
Reference information
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refueling point
(service station). Users are reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as propane
or butane); areas where the air contains chemicals or particles, such as
grain, dust, or metal powders; and any other area where you would
normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone or install the phone in
a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in
the same compartment as the phone, its parts, or enhancements.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or portable
wireless equipment in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
FCC regulations prohibit using your phone while in the air. Switch off your
phone before boarding an aircraft. The use of wireless telephones in an
aircraft may be dangerous to the operation of the aircraft, disrupt the
wireless telephone network, and may be illegal.
[ 143 ]
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
• EMERGENCY CALLS
Important: This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well as user-
programmed functions. Because of this, connections in all conditions
cannot be guaranteed. Therefore you should never rely solely upon
any wireless phone for essential communications (for example,
medical emergencies).
Emergency calls may not be possible on all wireless phone networks or
when certain network services and/or phone features are in use. Check
with local service providers.
To make an emergency call:
1
If the phone is not on, switch it on. Check for adequate signal
strength.
Note: Some networks may require that a valid SIM card is properly
inserted in the phone.
2
3
Press ias many times as needed (for example, to exit a call, to exit
a menu, etc.) to clear the display and ready the phone for calls.
Key in the emergency number for your present location (for example,
911 or other official emergency number). Emergency numbers vary
by location.
4
Press the hkey.
If certain features are in use, you may first need to turn those features off
before you can make an emergency call. Consult this user guide and your
local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless phone
may be the only means of communication at the scene of an accident -
do not end the call until given permission to do so.
[ 144 ]
Reference information
• CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value
for this model phone as reported to the FCC when tested for use at the
ear is 0.91 W/kg, and when worn on the body, as described in this user
guide, is 0.77 W/kg. (Body-worn measurements differ among phone
models, depending upon available enhancements and FCC requirements).
[ 145 ]
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file
with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID LJP NPL-3.
For body worn operation, this phone has been tested and meets the FCC
RF exposure guidelines for use with an enhancement that contains no
metal and that positions the handset a minimum of 7/8 inch (2.2 cm) from
the body. Use of other enhancements may not ensure compliance with
FCC RF exposure guidelines. If you do not use a body-worn enhancement
and are not holding the phone at the ear, position the handset a minimum
of 7/8 inch (2.2 cm) from your body when the phone is switched on.
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other regions
please look under product information at http://www.nokia.com/us.
[ 146 ]
Reference information
• BATTERY INFORMATION
This section provides information about the phone battery. Be aware that
the information in this section is subject to change.
Note: Dispose of used batteries in accordance with any
local regulations.
The tables shown in this section provide information about battery options
that are available for your phone, charging times with the Travel Charger
(ACP-12), the Rapid Travel Charger (ACP-8), the Standard Travel Charger
(ACP-7), talk-times, and standby times. For more information, contact
your service provider.
Charging times
The following charging times are approximate:
Charger Options
ACP-12
ACP-8
ACP-7
BLD-3 720 mAh Li-Ion battery
Up to 1.5 h Up to 2 h Up to 3 h
Talk and standby times
Operation times are estimates only and depend on signal strength, phone
use, network conditions, features used, battery age and condition
(including the effect of charging habits), temperatures to which the
battery is exposed, and many other factors. The amount of time a phone
is used for calls will affect its standby time. Likewise, the amount of time
that the phone is turned on and in standby mode will affect its talk-time.
Talk/Standby Time
850
2.5 h
2 h
1800
4 h
1900
3.5 h
3 h
Talk-time
Talk-time with Speakerphone
Radio and Headset standby time
Radio and Speakerphone standby time
Standby time
2.5 h
28.5 h
6.4 h
10 d
[ 147 ]
• TECHNICAL INFORMATION
Feature
Specification
Weight
3.2 oz. (92 grams) with BLD-3 720 mAh
Li-Ion battery
Wireless networks
Size (volume)
GSM 850, 1800, and 1900 networks
4.6 cubic inches (75 cubic centimeters)
Frequency range (Tx)
GSM 850: 824-849 MHz
GSM 1800: 1710-1785 MHz
GSM 1900: 1850-1910 MHz
GSM 850: 869-894 MHz
Frequency range (Rx)
Tx output power
Battery voltage
GSM 1800: 1805-1880 MHz
GSM 1900: 1930-1990 MHz
2 W (GSM 850 max)
1 W (GSM 1800/GSM 1900 max)
3.7 Vdc
Operating temperature +14°F to +131°F (-10°C to +55°C)
Number of channels
Memory locations
GSM 850: 124
GSM 1800: 374
GSM 1900: 299
Up to 500 in phone memory
[ 148 ]
Reference information
• ENHANCEMENTS
If you want to increase phone functionality, a range of enhancements is
available for you. You can select any of these items to help accommodate
your specific communication needs.
Use enhancements safely
A few practical rules for enhancement operation:
•
•
Keep all enhancements out of the reach of small children.
When you disconnect the power cord of any enhancement, grasp and
pull the plug, not the cord.
•
•
•
Check regularly that any vehicle-installed enhancements are
mounted and are operating properly.
Installation of any complex car enhancements must be made by
qualified personnel only.
Use only batteries, chargers, and enhancements that have been
approved by the phone manufacturer. The use of any other types
could invalidate any approval or warranty applying to the phone and
could be dangerous.
720 mAh Li-Ion Battery (BLD-3)
Provides up to 4 hours of talk time and up to 3 hours
of talk time with the speakerphone.
For complete information on the phone battery
(including talk, standby, and charging times), see
“Battery information” on page 147.
[ 149 ]
Mobile Charger (LCH-12)
This multivoltage charger plugs into the
cigarette lighter in a vehicle and is an easy
and convenient way to charge the compatible
phone battery in a vehicle.
To use the charger, plug it into a standard 120-Vac outlet and connect the
lead from the charger to the base of your phone. Calls can be made during
charging, even with a fully discharged battery.
Also available:
Mobile Charger (LCH-9)
Travel Charger (ACP-12)
This lightweight ac charger can be used with all battery
options. To use the charger, plug it into a standard 120-Vac
wall outlet and connect the lead from the charger to the
base of your phone. Calls can be made during charging, even
with a fully discharged battery.
Also available:
Standard Travel Charger (ACP-7)
Rapid Travel Charger (ACP-8)
Headset Kit (HDB-4)
New over-the-ear design concept boom headset is small,
lightweight, and provides excellent audio quality.
Also available:
Stereo Headset (HDS-3)
Retractable Headset (HS-10)
Headset (HS-5)
[ 150 ]
Reference information
CameraHeadset
(HS-1C)
The camera headset
allows you to take
single-shot pictures
from a small camera
which is mounted on the headset. The camera is powered by the Pop-port
connector on the bottom of your phone, and you use the options in your
phone to store, send, or delete pictures. A microphone mounted on the
camera and an answer/end button on the headset allows you to
conveniently use your phone while snapping pictures.
Loopset (LPS-4)
With the loopset, people who use a T-coil equipped hearing
aid have the freedom to talk on a digital mobile phone. The
loopset goes around your neck so it can be worn comfortably
and discreetly.
Data Cable (DKU-5)
For e-mail, faxes, Internet, and data
transmissions. Easy and convenient
connection with no modem or PC
card needed.
TTY/TDD Adapter (HDA-10)
The TTY/TDD adapter is a Nokia enhancement
that allows you to connect your mobile
phone to a Telecommunications Device
for the Deaf (TTY/TDD) to make a call in
digital mode.
[ 151 ]
Complete Car Kit (CARK-143)
The complete car kit is a complete
handsfree solution for your vehicle.
Also available:
Handsfree Headrest (BHF-1)
Mobile Holder (MBC-15S)
RF-Coupler (AXF-15S)
Connectivity Desk Stand
(DCV-14)
The connectivity desk stand is an economical
choice when you need your phone close at
hand, always ready for calls.
Also available:
Battery Charging Stand (DDC-1)
Music Stand (DT-1)
The music stand is a
convenient way to listen to
the radio or speaker in your
phone. The music stand has
two, full- range speakers and
a built-in stereo amplifier.
The microphone, answer/end
button, and volume control key
all enhance the convenience
and handsfree method of using
your Nokia phone. The music
stand also has a built-in charger.
[ 152 ]
Reference information
• GLOSSARY
Business card
A business card is the same as an entry in the
contacts list. It may contain a name, phone number,
and text entry. It can also be sent to other devices.
Call forwarding A network services feature you use to forward
incoming calls to another number.
Call lists
A list used to track numbers for incoming, outgoing,
or missed calls.
Call log
A log that registers information about calls you make
and receive.
Call timers
Call waiting
Timers used to track the amount of time you spend
on calls.
A network services feature that enables your phone
to beep while you are in the middle of a call. The beep
lets you know that someone else is calling you.
Gallery
A menu within your phone that stores downloaded
images and tones.
International
Mobile
Equipment
Identifier (IMEI)
The identification number that is assigned to the
phone. This number is located on the type label,
located underneath the battery.
In-call options Features available for use while you are in a call.
Keyguard
Keypad tones
Menu
Locks the keypad to prevent accidental key presses.
The tone you hear when you press a key.
A list of choices you can make to change settings on
your phone or use various phone features.
[ 153 ]
Multimedia
messages
(MMS)
A message that contains a combination of text,
images, or MIDI tones
Predictive text A method of entering information in your phone
that uses a dictionary to predict, or guess, what you
are writing.
Profile
A group of settings you can use to customize the way
your phone works.
Quick save
A fast method for saving a number.
Ringing tone
The sound your phone makes when you receive a call.
Ringing tones can be ringing sounds or short tunes.
Scroll bar
A bar that appears on the right side of the screen
when you scroll through the main menus.
Short message A message that contains text, numbers, or special
service (SMS)
Start screen
Voice mail
characters.
Your phone’s idle screen.
A network services feature that enables people who
call and miss you to leave a voice message on your
phone.
Warning tones Sounds your phone makes during error conditions,
during confirmations, when the battery is low, and
when you need to recharge the battery.
[ 154 ]
Reference information
• FREQUENTLY ASKED QUESTIONS
This section lists answers to the most frequently asked questions. Some of
the answers contain menu shortcuts. For a list of shortcuts, see “Menu
shortcuts” on page 15.
Q. What is my security code?
A. The default security code is 12345. However, Nokia recommends that
you change this code immediately. Certain features can be used only
after the correct security code has been successfully entered.
Q. How do I lock and unlock the keypad?
A. Lock the keypad by pressing Menu s. To unlock the keypad, press
Unlock s.
Q. How do I make the phone ring louder?
A. Press Menu 3 (Profiles). Scroll through the list of profiles until you
find the one for which you want to set the ringing volume, then
press Select.
•
•
•
Scroll to Customize and press Select.
Scroll to Ringing volume and press Select.
Scroll to the volume level of your preference and press Select.
Q. How do I change the ringing tone?
A. Press Menu 3 (Profiles). Scroll through the list of profiles until
you find the one for which you want to set the ringing tone, then
press Select.
•
•
•
Scroll to Customize and press Select.
Scroll to Ringing tone and press Select.
Scroll through the options. When you hear the tone you want to
use, press Select.
[ 155 ]
Q. How do I store my voice mailbox number?
A. Press Menu 01-3-2 (Messages > Voice messages > Voice mailbox
number). Enter your voice mailbox phone number and press OK.
Q. How do I call my voice mailbox number (retrieve voice messages)?
A. When your phone alerts you to new voice messages, press Listen and
follow the instructions on the phone. If you would rather listen to
your messages later, press Exit.
To listen to your voice messages at a later time, perform one of the
following actions:
•
•
Press and hold 1.
Press Menu 01-3-1 (Messages > Voice messages > Listen to
voice messages). Follow the recorded voice prompts to listen to
your messages.
Q. How do I redial the last-dialed number?
A. Press htwice.
Q. How do I assign a key to 1-touch dialing?
A. First, you must verify that 1-touch dialing is activated:
•
•
•
Press Menu 4-3-4 (Settings > Call settings > 1-touch dialing).
After a brief pause, On and Off appear in the display.
Scroll to On and press Select.
Then you can assign a key to 1-touch dialing:
•
•
•
•
Press Contacts and scroll to 1-touch dialing.
Press Select.
Scroll to the first (empty) slot and press Assign.
Enter or retrieve the name/number you want to assign to the key
and press OK.
Repeat these steps as many times as necessary.
[ 156 ]
Reference information
Q. How do I check the contacts list memory status?
A. Press Menu 4-4-9 (Settings > Phone settings > Memory status)
and press Select. Scroll to Contacts and press Select. The memory
status for your selection appears in the display.
Q. How do I find my phone’s Model number and IMEI number?
A. The model number and IMEI numbers are located on a label under the
phone battery. Turn your phone off, remove the back cover, and then
remove the battery from the phone.
Q. How do I clear my call timers?
Important: Clearing call timers cannot be undone.
A. Press Menu 2-5-5 (Call log > Call timers > Clear timers). When the
security code prompt appears, enter your security code and press OK.
[ 157 ]
• TROUBLESHOOTING
Problem
Possible cause
Possible solution
My phone is not The charger and phone are Securely connect the
charging
not properly connected.
charger to the phone.
The charger is not properly Ensure the charger is
plugged into the wall. plugged in correctly.
My phone is
not making/
receiving calls
The battery is not charged. Charge the battery.
The signal strength is poor. Ifyou are indoors, move
toward a window.
I cannot listen
to my voice
messages
You do not have voice mail Call your wireless
service.
provider.
You have not setup your
Call your wireless
voice mail service with your provider.
wireless provider.
You have not saved your
See “Save your voice
voice mail number to your mailbox number” on
phone.
page 69.
You have forgotten your
Call your wireless
password or are entering it provider.
incorrectly.
The voice mail number you Call your wireless
have saved to your phone is provider.
incorrect.
When I insertmy Fixed dialing is activated on Deactivatefixeddialing
SIM card into your SIM card and the on the SIM.
another phone, receiving phone does not
it is rejected
support fixed dialing.
[ 158 ]
Reference information
• Nokia ONE-YEAR LIMITED WARRANTY
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1
The limited warranty for the Product extends for ONE (1) year beginning
on the date of the purchase of the Product. This one year period is
extended by each whole day that the Product is out of your possession
for repair under this warranty.
2
The limited warranty extends only to the original purchaser (“Consumer”)
of the Product and is not assignable or transferable to any subsequent
purchaser/end-user.
3
4
The limited warranty extends only to Consumers who purchase the
Product in the United States of America.
During the limited warranty period, Nokia will repair, or replace, at
Nokia’s sole option, any defective parts, or any parts that will not
properly operate for their intended use with new or refurbished
replacement items if such repair or replacement is needed because
of product malfunction or failure during normal usage. No charge
will be made to the Consumer for any such parts. Nokia will also
pay for the labor charges incurred by Nokia in repairing or replacing
the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including framing,
and any non-operative parts. Nokia’s limit of liability under the limited
warranty shall be the actual cash value of the Product at the time the
Consumer returns the Product for repair, determined by the price paid
by the Consumer for the Product less a reasonable amount for usage.
Nokia shall not be liable for any other losses or damages. These remedies
are the Consumer’s exclusive remedies for breach of warranty.
5
Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated
itemized receipt.
[ 159 ]
6
7
The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this
limited warranty.
The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt, windstorm,
lightning, earthquake or damage from exposure to weather
conditions, an Act of God, or battery leakage, theft, blown f
use, or improper use of any electrical source, damage caused
by computer or internet viruses, bugs, worms, Trojan Horses,
cancelbots or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the enhancement data code
has been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external
antenna, or viruses or other software problems introduced into
the Product.
8
Nokia does not warrant uninterrupted or error-free operation of the
Product. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
[ 160 ]
Reference information
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles)
or for other good cause, the Consumer shall ship the Product
prepaid and insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not
covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible
for any expenses related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within
30 days after receipt of the Product. If Nokia cannot perform
repairs covered under this limited warranty within 30 days, or
after a reasonable number of attempts to repair the same defect,
Nokia at its option, will provide a replacement Product or refund
the purchase price of the Product less a reasonable amount for
usage. In some states the Consumer may have the right to a
loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the
telephone number listed at the end of this warranty if you need
a loaner and the repair of the Product has taken or is estimated
to take more than ten (10) days.
[ 161 ]
f) If the Product is returned during the limited warranty period, but
the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified
and given an estimate of the charges the Consumer must pay to
have the Product repaired, with all shipping charges billed to the
Consumer. If the estimate is refused, the Product will be returned
freight collect. If the Product is returned after the expiration of
the limited warranty period, Nokia’s normal service policies shall
apply and the Consumer will be responsible for all shipping charges.
9
You (the Consumer) understand that the product may consist of
refurbished equipment that contains used components, some of
which have been reprocessed. The used components comply with
Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES,
LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,
COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR
FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,
INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL
NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE
PRODUCT IS BEING REPAIRED.
[ 162 ]
Reference information
11 Some states do not allow limitation of how long an implied warranty
lasts, so the one year warranty limitation may not apply to you (the
Consumer). Some states do not allow the exclusion or limitation
of incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
13 This is the entire warranty between Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or understandings,
oral or written, relating to the Product, and no representation,
promise or condition not contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
17 The limited warranty period for Nokia supplied attachments and
enhancements is specifically defined within their own warranty cards
and packaging.
[ 163 ]
NOTES
[ 164 ]
Appendix A Message from the CTIA
Appendix A
Message from the CTIA
(CellularTelecommunications
& Internet Association) to all
users of mobile phones.
© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.
1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: (202) 785-0081
[ 165 ]
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique combination
of convenience, safety and value delivered by the wireless telephone. Quite simply,
the wireless phone gives people the powerful ability to communicate by voice--
almost anywhere, anytime--with the boss, with a client, with the kids, with
emergency personnel or even with the police. Each year, Americans make billions
of calls from their wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good judgment must be exercised at
all times while driving a motor vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness,
caution and courtesy. It requires a heavy dose of basic common sense---keep your
head up, keep your eyes on the road, check your mirrors frequently and watch out
for other drivers. It requires obeying all traffic signs and signals and staying within
the speed limit. It means using seatbelts and requiring other passengers to do the same.
But with wireless phone use, driving safely means a little more. This brochure is a
call to wireless phone users everywhere to make safety their first priority when
behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to
help others in need.
When it comes to the use of wireless phones, safety is your most important call.
Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1
Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable
features most phones offer, including automatic redial and memory. Also, work
to memorize the phone keypad so you can use the speed dial function without
taking your attention off the road.
2
3
When available, use a hands free device. A number of hands free wireless phone
accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
[ 166 ]
Appendix A Message from the CTIA
4
5
6
Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and
ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility
is to pay attention to the road.
Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a "to do" list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get caught
in a dangerous situation because you are reading or writing and not paying
attention to the road or nearby vehicles.
Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while driving,
follow this simple tip--dial only a few numbers, check the road and your
mirrors, then continue.
7
8
9
Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix--they are distracting
and even dangerous when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary, suspend conversations
which have the potential to divert your attention from the road.
Use your wireless phone to call for help. Your wireless phone is one of the greatest
tools you can own to protect yourself and your family in dangerous situations--
with your phone at your side, help is only three numbers away. Dial 9-1-1 or
other local emergency number in the case of fire, traffic accident, road hazard
or medical emergency. Remember, it is a free call on your wireless phone!
Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your
community. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10 Call roadside assistance or a special wireless non-emergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services. But
you still can use your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident
where no one appears injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to inform
wireless phone users of their responsibilities as safe drivers and good citizens. As we
approach a new century, more and more of us will take advantage of the benefits
of wireless telephones. And, as we take to the roads, we all have a responsibility to
drive safely.
[ 167 ]
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.
1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: (202) 785-0081
[ 168 ]
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy
(RF) in the microwave range while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does not produce heating effects causes
no known adverse health effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested that some biological effects
may occur, but such findings have not been confirmed by additional research. In
some cases, other researchers have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
•
•
•
Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user
that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones. FCC also
regulates the base stations that the wireless phone networks rely upon. While these
base stations operate at higher power than do the wireless phones themselves, the
[ 170 ]
Appendix B Message from the FDA
RF exposures that people get from these base stations are typically thousands of
times lower than those they can get from wireless phones. Base stations are thus not
the subject of the safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called cell mobile or PCS phones. These types of wireless phones can
expose the user to measurable radiofrequency energy (RF) because of the short
distance between the phone and the user’s head. These RF exposures are limited by
Federal Communications Commission safety guidelines that were developed with
the advice of FDA and other federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with increasing distance from the
source. The so-called cordless phones; which have a base unit connected to the
telephone wiring in a house, typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radiofrequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other studies exposed the animals to
RF for up to 22 hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don’t know with certainty what the
results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these studies was around
three years.
5. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time tumors
develop - if they do - may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF exposure during day-to-
day use of wireless phones. Many factors affect this measurement, such as the angle
at which the phone is held, or which model of phone is used.
[ 171 ]
6. What is FDA doing to find out more about the possible health effects
of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization International
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential
result of this work has been the development of a detailed agenda of research needs
that has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a
formal Cooperative Research and Development Agreement (CRADA) to do research
on wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research
will include both laboratory studies and studies of wireless phone users. The CRADA
will also include a broad assessment of additional research needs in the context of
the latest research developments around the world.
7. How can I find out how much radiofrequency energy exposure I can
get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC
established these guidelines in consultation with FDA and the other federal health
and safety agencies. The FCC limit for RF exposure from wireless telephones is set
at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC
limit is consistent with the safety standards developed by the Institute of Electrical
and Electronic Engineering (IEEE) and the National Council on Radiation
Protection and Measurement. The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb energy from the wireless phone
and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF exposure level for each model
of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives
directions for locating the FCC identification number on your phone so you can find
your phone’s RF exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy coming
from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical
standard for measuring the radiofrequency energy (RF) exposure from wireless
phones and other wireless handsets with the participation and leadership of FDA
scientists and engineers. The standard, Recommended Practice for Determining the
Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques, sets forth the first consistent
test methodology for measuring the rate at which RF is deposited in the heads of
wireless phone users. The test method uses a tissue-simulating model of the human
head. Standardized SAR test methodology is expected to greatly improve the
consistency of measurements made at different laboratories on the same phone. SAR
is the measurement of the amount of energy absorbed in tissue, either by the whole
[ 172 ]
Appendix B Message from the FDA
body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a wireless phone complies
with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency
energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is-
-it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radiofrequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could
place more distance between your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example, you could use a headset and
carry the wireless phone away from your body or use a wireless phone connected to
a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful.
But if you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including
children and teenagers. If you want to take steps to lower exposure to radiofrequency
energy (RF), the measures described above would apply to children and teenagers
using wireless phones. Reducing the time of wireless phone use and increasing the
distance between the user and the RF source will reduce RF exposure.Some groups
sponsored by other national governments have advised that children be discouraged
from using wireless phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a recommendation in December 2000.
They noted that no evidence exists that using a wireless phone causes brain tumors
or other ill effects. Their recommendation to limit wireless phone use by children was
strictly precautionary; it was not based on scientific evidence that any health hazard
exists.
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard sponsored by the Institute
of Electrical and Electronic Engineers (IEEE). This standard specifies test methods
and performance requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and a accompanied
hearing aid at the same time. This standard was approved by the IEEE in 2000.
[ 173 ]
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
•
•
•
•
•
FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
World Health Organization (WHO) International EMF Project
http://www.who.int/emf
National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001 For updates: http://www.fda.gov/cdrh/phones
[ 174 ]
Index
automatic Keyguard 92
activate/deactivate 92
Numerics
1-touch dialing 47
activate 90
assign a key 48
change numbers 48
delete numbers 48
make a call 48
B
battery
battery (BLD-3) 149
battery info
bookmark
set while browsing 137
browser
use bookmarks 137
browser options 134
business cards
A
activate
call forwarding 88
adding folders 73
alarm
setting 101
snooze 102
turning off 101
with phone off 102
with phone on 102
alarm clock 101
antenna
use the antenna 8
anykey answer 89
applications 11 5
downloading 116
launching 11 5
options 115
receive 46
send 46
C
calculator 118
calendar
view memory status 11 7
audible alerts 123
setting up 123
sounds 123
authority certificates 138
about 138
4-way scrolling 107
birthday note 108
call note 108
date notes 108
discard viewed notes 111
go to date 108
meeting note 108
memo note 108
viewing 138
[ 175 ]
monthly view 108
note options 109
note types 108
opening 107
cell info display 92
certification information 145
change
reminder 108
save received notes 111
saving notes 108
uses 107
date format 87
keypad tones 83
PIN2 code 40
view notes 109
view received notes 111
calendar notes
sending and receiving 110
call duration 81
viewing 81
profile names 83
ringing volume 83
charger
call forwarding
activate 88
cancelling 89
definition 88
call log
about 78
delete call lists 80
options 78
clock
alarm 101
view call duration 81
view dialed numbers 80
view missed calls 79
view received calls 79
call note 108
call waiting 90
activate 90
set 86
set the date 87
show/hide 86
time format 87
closed user groups 38
codes
access 38
use 90
caller groups 52
options 52
dialing 70
PIN2 40
PUK 40
setup 53
calls
complete car kit (CARK-143) 152
connect to other devices 124
connectivity 124
IR 124
forwarding 88
ignoring 14
redial last 14
connectivity desk stand (DCV-14)152
[ 176 ]
contacts 41
copy 46
display brightness
screen brightness 97
display language 92
display settings 95
screen brightness 29
wallpaper 95
delete 45
edit 45
save 42
search 45
view 41
currency
distribution lists 58
download
converting 11 9
exchange rate 119
to foreign 119
to home 11 9
currency conversion 11 9
customer care
Canada 16
pictures 59
E
e-mail
replying 62
writing and sending 62
emergency call
USA 16
emergency calls 144
handsfree 97
customize
display language 92
D
data cable (DKU-5) 151
date
headset 97
change the format 87
show/hide the date 87
definition of terms 153
delete
1-touch dialing numbers 48
messages 74
delete call lists 80
dialed calls, viewing 80
dialing codes
how to use 70
setup voicemail with 71
dictionary
add new words 34
in predictive text 34
disconnect from wireless Internet137
loopset 98
music stand 100
TTY 98
enhancements 148
battery (BLD-3) 149
camera headset (HS-1C) 151
complete car kit (CARK-143) 152
connectivity desk
stand (DCV-14) 152
data cable (DKU-5) 151
headset kit (HDB-4) 150
loopset (LPS-4) 151
mobile charger (LCH-12) 150
music stand (DT-1) 152
safety 149
[ 177 ]
travel charger (ACP-12) 150
TTY/TDD adapter (HDA-10) 151
Internet
connect with your phone 134
extras 118
L
F
languages
FAQs 153
available 92
loopset 98
FCC information 145
fixed dialing
edit number list 37
emergency numbers 36
notes about 37
setup and activate 36
folders
M
memo note 108
menu functions 54
messages 54
adding 73
list of 73
organize messages with 72
removing 74
four-way scrolling
in calendar 107
messages
deleting 74
G
games 113
launching 11 3
options 114
playing 114
glossary 153
e-mail 61
message center number 55
message icons 54
moving 74
picture messages 59
save to folders 72
text messages 56
view saved 73
H
handsfree 97
headset 97
voice messages 69
missed calls 79
MMS
headset kit (HDB-4) 150
help text 94
I
changing 64
defining 64
editing 65
reading and replying 67
writing and sending 67
IMEI
location on the phone 16, 153
Infrared connections 124
sending and receiving data 124
[ 178 ]
mobile charger (LCH-12) 150
moving messages 74
multimedia messages 63
music stand 100
profiles 82
customizing 82
selecting 82
PUK codes 40
music stand (DT-1) 152
R
N
received calls 79
Nokia one-year limited warranty
159
receiving
calendar notes 110
Nokia PC Suite
important safety information 141
removing folders 74
features 131
Nokia PC Suite and PC/PDA
connectivity guide 126, 132
O
organizer 107
P
phone security
security code 38
security levels 35
picture messages
composing and sending 60
downloading pictures for 59
modifying 61
S
SAR
definition 145
limits 146
save
calendar notes 108
received calendar notes 111
screen saver 96
security
security code 38
security levels 35
security settings 100
select a line for outgoing calls 91
send my caller identity 91
sending
receiving 59
sending 59
PIN 2 code 40
PIN code
changing 39
PIN code request 39
predictive text
about 56
activate and deactivate 32
add new words 34
primary number
copying 46
calendar notes 110
services 133
[ 179 ]
set clock 86
set the display language 92
settings 85
time format 87
to-do list 111
right selection key settings 85
time and date settings 86
tone settings 97
setup
voicemail 69
show/hide clock 86
SIM
making 111
options 112
TTY/TDD 98
SIIM-related services 94
SIM card
set up profile 98
if rejected 40
TTY/TDD adapter (HDA-10) 151
info numbers 52
non-owner 35
own numbers 52
PIN code 39
V
vibrating alert
turn on or off 83
view
security levels 35
service numbers 52
start-up tone 94
summary after call 91
synchronize
from your PC 131
from your phone 130
saving settings 128
synchronize data 128
system selection 93
call duration 81
clock on the start screen 86
date on the start screen 87
dialed numbers 80
fixed dialing numbers 37
missed calls 79
monthly view, calendar 108
picture messages 59
received calendar notes 111
received calls 79
received messages 56
saved messages 73
voice commands
activating 122
T
talk and standby times 147
technical information 148
text messages
forwarding 57
reading 56
replying to 57
adding 122
functions 121
writing and sending 56
working with 123
[ 180 ]
Voice dialing 49
wireless Internet
browsing 134
assigning a voice tag 49
dialing a number 50
voice dialing
signing off 137
signing on 134
notes 133
change a voice tag 51
delete a voice tag 51
play back a voice tag 51
voice messages 29
voice recorder 120
deleting a recording 121
editing a recording 121
recording speech or sound 120
recording while in a call 120
setting the voice memo alarm
121
wireless Internet site
examples 136
X
xHTML 133
xHTML broswer 134
use phone keys 135
xHTML page
viewing and playing recordings
120
voicemail
active link 136
enter information 136
examples 136
automate 70
call and setup 29, 69
listen to voice messages 29, 69
save your voice mailbox
number 69
using bookmarks 137
using dialing codes 71
W
wallpaper 95
warning tones
turn on or off 83
warranty information 159
welcome note 93
[ 181 ]
NOTES
[ 182 ]
NOTES
[ 183 ]
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA-2U,
fax 813-249-9619.
[ 184 ]
|