6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 1 Tuesday, January 25, 2005 10:05 AM
Nokia 6015i User Guide
1
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 3 Tuesday, January 25, 2005 10:05 AM
T a b l e o f C o n t e n t s
Table of Contents
For your safety........................................................................................................6
1. Phone at a glance....................................................................................... 11
2. Set up your phone ...................................................................................... 16
3. Text entry ...................................................................................................... 24
4. My Account ................................................................................................. 27
5. Messages....................................................................................................... 28
6. Extra Virgin................................................................................................... 36
7. Call History .................................................................................................. 38
8. Contacts......................................................................................................... 41
9. My Stuff......................................................................................................... 50
10. Settings.......................................................................................................... 52
11. Tools................................................................................................................ 70
12. Games............................................................................................................. 79
13. Enhancements.............................................................................................. 80
14. Battery information.................................................................................... 81
Care and maintenance...................................................................................... 84
Additional safety information......................................................................... 85
Appendix A Message from the CTIA Cellular Telecommunications &
Internet Association to all users of mobile phones.................................... 91
Nokia One-Year Limited Warranty................................................................. 94
3
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 4 Tuesday, January 25, 2005 10:05 AM
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road safety.
INTERFERENCE
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference
in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the device at a refueling point. Don't use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don't use the device where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
4
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 5 Tuesday, January 25, 2005 10:05 AM
F o r y o u r s a f e t y
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the device is switched on and in service. Press End as many
times as needed to clear the display and return to the main screen.
Enter the emergency number, then press Call. Give your location.
Do not end the call until given permission to do so.
I ABOUT YOUR DEVICE
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the phone must be switched on. Do not switch the device on when
wireless phone use may cause interference or danger.
I NETWORK SERVICES
To use the phone you must have service from a wireless service provider. Many of the
features in this device depend on features in the wireless network to function. These
Network Services may not be available on all networks or you may have to make
specific arrangements with your service provider before you can utilize Network
Services. Your service provider may need to give you additional instructions for their
use and explain what charges will apply. Some networks may have limitations that
affect how you can use network services. For instance, some networks may not
support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Contact
your service provider for more information.
5
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 6 Tuesday, January 25, 2005 10:05 AM
F o r y o u r s a f e t y
I SHARED MEMORY
The following features in this device may share memory: contacts, text messages,
ring tones, calendar, and games. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. Your device
may display a message that the memory is full when you try to use a shared
memory feature. In this case, delete some of the information or entries stored in
the shared memory features before continuing. Some of the features, such as
messages and ring tones may have a certain amount of memory specially allotted
to them in addition to the memory shared with other features.
6
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 7 Tuesday, January 25, 2005 10:05 AM
W e l c o m e
Welcome
Congratulations on your purchase of the Nokia 6015i mobile phone.
Your phone provides many functions which are practical for daily use,
such as a hands-free loudspeaker, alarm clock, calculator, calendar, and
more. Your phone can also connect to a PC, laptop, or other device using
a data cable. To personalize your phone, you can set your favorite ring
tones or select an Xpress-onTM color cover.
I Get help
If you need help, Nokia Customer Care is available for assistance. Before
calling, we recommend that you write down the Electronic serial number
(ESN) and your postal code, and have it available.
Find your phone label
If you need help, Nokia Customer Care
is available for assistance. Before
calling, we recommend that you write
down the following information and
have it available:
• Electronic serial number (ESN)
• Your postal code
The ESN is found on the type label, which is located beneath the battery
on the back of the phone. See Remove the back cover, 15 and Remove
the battery, 15 for more information.
7
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 8 Tuesday, January 25, 2005 10:05 AM
W e l c o m e
Contact Nokia
Please have your product with you when contacting either of the
numbers below:
Nokia Customer Care Center, USA
Nokia Inc.
7725 Woodland Center Boulevard, Suite #150
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U (1-888-665-4228)
Fax: 1-813-249-9619
TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)
Customer Care, Canada
Nokia Products Ltd.
601 Westney Road South
Ajax, Ontario L1S 4N7
Tel: 1-904-427-1373
1-888-22-NOKIA (1-888-226-6542)
Fax: 1-905-619-4360
Updates
From time to time, Nokia updates this guide to reflect changes. The latest
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all
individuals, including those with disabilities. For more information visit
8
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 9 Tuesday, January 25, 2005 10:05 AM
P h o n e a t
a
g l a n c e
1. Phone at a glance
1. Retractable antenna
2. 2.5-mm headset
jack
3. Right selection key
4. End key
5. Four-way scroll key
6. Microphone
7. Pop-Port™
connector
8. Charger port
9. Keypad
10. Call key
11. Left selection key
12. Display screen
13. Speakerphone
14. Earpiece
15. Power key
9
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 10 Tuesday, January 25, 2005 10:05 AM
P h o n e a t
a
g l a n c e
I The start screen
The start screen is home base and indicates that your phone is in idle mode.
Signal strength (1)—A higher bar indicates a stronger network signal.
Battery level (2)—A higher bar indicates more charge in the battery.
Menu (3)—Press the Left selection key to select this option.
Contacts (4)—Press the Right selection key to select this option.
I Quick keys
At the start screen, the Four-way scroll key takes you to frequently
accessed menus:
Scroll up key—Check your account balance.
Scroll right key—Access Extra Virgin.
Scroll down key—Go to the contacts list.
Scroll left key—Quickly create a text message.
I Indicators and icons
Depending on your wireless service provider and the model number of
your phone, some or all of the following indicators and icons may
appear on the start screen:
You have new text or picture messages. See Text messages, 25.
You have new voice messages. See Voice messages, 28.
Device keypad is locked. See Keyguard, 20.
Device is set to the silent profile. See Profiles, 48.
Alarm clock is set to on. See Alarm clock, 66.
10
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 11 Tuesday, January 25, 2005 10:05 AM
P h o n e a t
a
g l a n c e
Countdown timer is running. See Countdown timer, 72.
Stopwatch timer running in the background. See
Stopwatch, 73.
Integrated hands-free is active. See Use the loudspeaker, 19.
Timed profile is selected. See Profiles, 48.
An enhancement is connected to the device.
See Enhancements, 76.
or
or
Voice privacy encryption is active (or is not active) in the
network. See Security settings, 61.
or
Location info sharing is set to Emergency or On.
See Location info sharing, 50.
Vibrating alert is active. See Customize a profile, 48.
You are roaming outside your home network.
See Roaming options, 64.
You are in a 1XRTT network. See Network services, 5.
You are in a digital network. See Network services, 5.
You are in an analog network. See Network services, 5.
or
Offhook, call or data call in progress.
See Minibrowser calls, 36.
I Get the most out of this guide
The following sections illustrate the various components of your phone.
Familiarize yourself with these sections to help you understand the
instructions that follow.
This guide uses certain terms for the steps that you are asked to perform.
• Press means to press and release a key quickly. For example, press 7
means press the key on the keypad that is labeled with the number 7
and the letters “pqrs”.
11
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 12 Tuesday, January 25, 2005 10:05 AM
P h o n e a t
a
g l a n c e
• Press and hold means to press and hold a key for 2–3 seconds; then
release the key.
• Selection keys are used to select a menu option. To select an option,
press the selection key below the menu item on the phone screen.
• Scroll keys are used to move up, down, left, or right in the menus.
• Call and End keys: Press Call to place a call or to answer an
incoming call. Press End to end a call or press and hold to return
to the start screen.
I Phone menus
Phone features are grouped according to function and are accessed through
the main menus. Each main menu contains submenus and lists from which
you can select or view items and customize your phone features. You can
access these menus and submenus by using the scroll method or by using a
shortcut. Some features may not be available, depending on your network.
For more information, contact your wireless provider.
Scroll method
1. At the start screen, select Menu, and scroll up and
down through the main menus using the Four-way
scroll key.
As you scroll through the menus, the menu number
appears in the upper right corner of the display. Below the number is
a scroll bar with a tab that moves up or down on the right side of the
display screen as you scroll through the menus, providing a visual
representation of your current position in the menu structure.
2. When you arrive at a menu:
• Press the Left selection key (Select) to enter submenus or, when
the browser appears on display, select Connect to enter that menu.
• Press the Right selectionkey (Back) to return to the previous menu.
• Press End from any submenu or select Exit from the main menu
level to return to the start screen.
12
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 13 Tuesday, January 25, 2005 10:05 AM
P h o n e a t
a
g l a n c e
Shortcuts
You can go directly to almost any menu or submenu, as well as activate
most features by using a shortcut.
At the start screen, select Menu; then within 3 seconds, select the key or
keys associated with the menu function you would like to view or activate.
For example, to view missed calls, select Menu 4-3-1 from the start
screen (Menu > 4 Call History > 3 Missed calls). After a brief pause, the
Missed calls list is activated.
In-phone help
Many features have brief descriptions (help text) that can be viewed on
the display. To view these descriptions, scroll to a feature, and wait for
about 15 seconds. Select More, when necessary, to view all of the
description, or Back to exit.
In order to view the descriptions, you must first activate help text.
At the start screen, select Menu > Settings > Phone settings > Help text
activation > On or Off.
13
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 14 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
2. Set up your phone
I Antenna
Your phone has two antennas:
• The retractable antenna is active
when fully extended (1).
• The internal antenna is always
active (2).
In the Nokia 6015i phone, the GPS
antenna is also internal and is
activated when placing emergency
calls or when On is selected from the
Location info sharing menu. See
Location info sharing, 50.
Your device has an internal antenna located towards
the top of the phone. Hold the phone as you would
any other telephone with the antenna area pointed
up and over your shoulder.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched
on. Contact with the antenna affects call
quality and may cause the phone to operate
at a higher power level than otherwise
needed. Avoiding contact with the antenna
area when operating the phone optimizes
the antenna performance and the battery life.
14
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 15 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
I Change battery
Always switch the device off, and disconnect the charger before
removing the battery.
Always use original Nokia batteries, see Nokia battery authentication
guidelines, 78.
Remove the back cover
1. With the back of the phone
facing you, push down on the
back cover release button.
2. Slide the back cover toward the
bottom of the phone and remove.
Remove the battery
After you have removed the back cover,
insert your finger into the finger grip, and
lift the battery from its compartment.
Replace the battery
1. Position the battery so the
positive and negative indicators
on the battery match up with the
positive and negative indicators
on the phone.
The battery label must face away from the phone.
2. Insert the battery, gold-colored contact end first, into the battery slot.
3. Push down on the other end of the battery to snap the battery into place.
Replace the back cover
Slide the back cover toward the top
of the phone until the back cover is
securely in place.
15
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 16 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
Charge the battery
1. Plug the charger into a standard ac outlet.
2. Insert the charger output plug
into the round jack at the bottom
end of the phone.
After a few seconds, the battery
indicator in the display starts to
scroll from bottom to top. If the
battery is completely discharged,
it may take a few minutes before
the charging indicator appears on
the display or before any calls can be made.
I Turn on or off
To turn your phone on or off, press and hold
the Power key on top of the phone for at
least 3 seconds.
I Connect the headset
A compatible headset, such as HS-5, may be
purchased separately as an enhancement.
(See Enhancements, 76.)
1. Plug the headset connector
into the Pop-Port™ connector
at the bottom end of your
phone. The
icon appears
on the start screen.
2. Position the headset on
your ear.
With the headset connected, you can make, answer, and end calls
as usual.
• Use the keypad to enter numbers.
• Press Call to place a call.
• Press End to end a call.
16
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 17 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
You can also plug a compatible headset into the 2.5mm headset jack on the
side of your phone to allow hands-free operation. See Enhancements, 76.
I Change Xpress-on™ covers
Note: Before removing the cover, always switch off the power, and
disconnect the charger and any other device. Avoid touching
electronic components while changing the covers. Always store
and use the device with the covers attached.
Remove the back cover and battery
For instructions to remove back cover and battery, see Change battery, 15.
Remove the front cover
Gently pull the bottom of the front cover
away from the rest of the device, and
remove the front cover.
Install the keymat and front cover
1. Remove the keymat from the old
front cover.
2. Place the keymat into the new
front cover.
3. Press the front cover and keymat
against the phone, and snap the
front cover into place.
17
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 18 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
Warning: Always replace the front cover before replacing the
battery and the back cover. Replacing the back cover first may
cause damage to your phone.
Replace the battery and back cover
For instructions to replace back cover and battery, see Change battery, 15.
I Make a call
Note: Before making or receiving a call, fully extend the
retractable antenna.
Use the keypad
1. Enter the phone number (including the area code), and press Call.
(To delete a character to the left of the cursor, select Clear.)
2. Press End to end the call, or select End call to cancel the call attempt.
Use the contacts list
1. At the start screen, scroll down to the entry you wish to view.
2. Press Call to make the call, or select Details to view details of the entry.
Use the last dialed number
1. At the start screen, press Call to display the last 20 numbers dialed.
2. Scroll to the number (or name) you wish to redial, and press Call.
Conference calling
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > New call.
3. Enter the phone number of the second participant, or select Search
to retrieve a number from the contacts list.
4. Select Flash. The first participant is put on hold.
5. When the second participant picks up, press Call to connect the calls.
6. To end the conference call, select Options > End all calls, or press End.
18
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 19 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
I Answer calls
Answer or silence/reject an incoming call
Silence/Reject is a carrier dependent feature.
1. Press Call or select Answer to answer the call.
2. To mute the ringing tone, select Silence. If you don’t answer the call, the
call is eventually forwarded to voicemail (a carrier dependent feature).
3. To dismiss and forward the call to voicemail, select Dismiss after you
have muted the ringing tone, or press End at any time.
Answer a call with locked keypad
To answer a call with the keypad locked, press Call. During the call, all
features function as normal. When you end or silence/reject the call, the
keypad automatically relocks. See Keyguard, 20 for details.
When the keypad is locked, calls may be possible to the official emergency
number programed into your phone.
Adjust the earpiece volume
While in a call, scroll right or left to adjust the volume of the earpiece.
When adjusting the volume, a bar chart appears in the display indicating
the volume level.
Use the loudspeaker
Warning: Do not hold the device near your ear when the
loudspeaker is in use because the volume may be extremely loud.
You can use your phone as a loudspeaker during a call.
• To activate the loudspeaker, select Loudsp.
• To deactivate the loudspeaker, select Handset.
The loudspeaker is deactivated automatically when a call (or a call
attempt) ends or when certain enhancements are connected.
Options during a call
Many of the options that you can use during a call, are network services.
Check with your wireless service provider for more information.
19
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 20 Tuesday, January 25, 2005 10:05 AM
S e t u p y o u r p h o n e
1. Select Options during a call to display the following options:
Mute/Unmute—Silence your end of the call.
Loudspeaker/Handset—Activate or deactivate the loudspeaker while
in a call.
New call—Initiate a conference call. See Conference calling, 18.
Save—Save the number you keyed in during a call.
Add to name—Save the number you keyed in during a call to a contact
already in the contacts list.
End all calls—Disconnect from all active calls.
Touch tones—Enter the numbers, and select Tones to send the numbers
as tones.
Contacts—View the contacts list.
Menu—View the phone menu.
2. Scroll to an option, and Select to activate the option or enter
its submenu.
I Keyguard
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally, and prevent accidental calls. If the keypad is locked, it unlocks
when you receive a call. After the call, the lock automatically reactivates.
When the keyguard is on, calls still may be possible to the official
emergency number programed into your phone. See Automatic
keyguard, 54.
Lock the keypad
At the start screen, select Menu; then press * within 5 seconds.
Unlock the keypad
At the start screen, select Unlock; then press * within 2 seconds.
20
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 21 Tuesday, January 25, 2005 10:05 AM
T e x t e n t r y
3. Text entry
You can use two methods for entering text and numbers:
• Standard mode is the only way to enter text into the contacts list
and to rename caller groups.
• Predictive text input is a quick and easy method for writing messages
or creating a calendar note. See Predictive text input, 22.
I Standard mode
Text (Abc)
• Press a key once to insert the first letter on the key, twice for the
second letter. If you pause briefly, the last letter in the display is
accepted, and your phone awaits the next entry.
• Select Clear to backspace the cursor and delete a character.
• Press and hold Clear to backspace continuously and delete characters.
• Press 0 to enter a space, thereby accepting a completed word.
• Press 1 to insert a period into your message.
• Press * to display a complete list of special characters.
• Press # to switch between uppercase, lowercase, and sentence case
text. As you press #, the following icons appear in the upper left of
the display screen:
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Sentence case text: standard mode is on. (This option is
only available at the beginning of a sentence).
21
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 22 Tuesday, January 25, 2005 10:05 AM
T e x t e n t r y
Numbers (123)
To switch to 123 mode from Abc mode, press and hold #at any text entry
screen until the icon in the upper left corner of the display switches from
Abc to 123 or back. In text modes (Abc, abc, ABC and predictive text), you
can also enter the number by holding the number key down.
Punctuation and special characters
While at any text entry screen, press * to display special characters (press
and hold * if predictive text is on). Press * again to cycle through all
available characters. To navigate through the list of special characters,
use the Four-way scroll key. Once a character is highlighted, select
Insert to insert the character into your message.
I Predictive text input
Predictive text input allows you to write messages quickly using your
keypad and the built-in dictionary. It is much faster than the standard
mode method, because for each letter, you only press the corresponding
key on your keypad once.
Activate or deactivate
At any text entry screen, press and hold Options. Predictive text is turned
on and off, depending on its previous mode.
OR
1. At any text entry screen, select Options > Predictive text.
2. Select the language of your choice.
Press # to switch predictive text on or off and to use predictive text in
various modes. As you press #, the following icons appear in the upper
left of the display screen:
Sentence case text: predictive text is on.
Lowercase text: predictive text is on.
Uppercase text: predictive text is on.
22
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 23 Tuesday, January 25, 2005 10:05 AM
T e x t e n t r y
Text entry
The following illustration simulates your display each time a key is
pressed. For example, to write Nokia with predictive text on and with
the English dictionary selected, press each of the following keys once:
6
6
5
4
2
• Press 0 to enter a space, and begin writing the next word.
• If a displayed word is not correct, press * to see other matches. To
return to the previous word in the list of matches, select Previous.
• If ? appears after a word, select Spell to add the word to the
predictive text.
• Press 1 to insert a period into your message.
• Press and hold * to display special characters. Press * again to cycle
through all available characters.
23
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 24 Tuesday, January 25, 2005 10:05 AM
M y A c c o u n t
4. My Account
You can access your Virgin Mobile account to check or increase
your balance.
I Access My Account
To access your account, select Menu > My Account. This connects to the
Virgin Mobile website.
24
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 25 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
5. Messages
If you have subscribed to a messaging service through your wireless
provider, you can send and receive text messages to compatible phones
that also subscribe to a compatible message service.
When composing text messages, the number of characters allowed appears
in the top right corner of the message. The use of special (unicode)
characters takes up more space. If there are special characters in your
message, the indicator may not show the message length correctly.
Note: When sending messages, your device may display Message
sent. This is an indication that the message has been sent by your
device to the message center number programed into your device.
This is not an indication that the message has been received at
the intended destination. For more details, about messaging
services, check with your service provider.
Important: Exercise caution while opening messages. Messages
may contain malicious software or otherwise be harmful to your
device or PC.
I Text messages
Write and send
1. At the start screen, select Menu > Messages > Text messages >
Create message > Add number or Add e-mail.
To go quickly to the Create message display, scroll left from the
start screen.
2. Enter the recipient’s phone number or e-mail address, or select Search
to retrieve a number or e-mail address from your contacts list, and
select OK.
3. Repeat step 2 to add more recipients, and select OK.
4. Select Options > Enter text.
5. Compose a message using the keypad, and select Options > Send.
25
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 26 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Options when creating a message
When you create or reply to a text message, depending on the mode of
text input you are using and the features supported by your wireless
service provider, some or all of the following options are available:
Send—Send the message to recipient.
List recipients—Send the message to more than one recipient, or delete
or edit the recipient list.
Settings—Set the priority of the message.
Save message—Select Sent items to save the message in the sent items
folder, select Templates to save the message as one of your predefined
templates, select Archive to save the message in your archive, or select a
folder you have created.
Clear text—Erase the text clipboard.
Exit editor—Save the message to your sent items folder automatically,
and leave the message editor.
Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the
contacts list.
Use template—Insert a predefined template into your message.
Insert word/Edit word—Enter or edit the text of a new word that might
not appear in the predictive text. This displays only when the Predictive
text is set to On.
Insert symbol—Insert a special character into your message. This displays
only when the predictive text is set to On.
Predictive text—Choose a predictive text language to turn predictive
text on or select Prediction off to turn it off.
Matches—View matches found in the predictive text for the word you
want to use.
Read messages
When you receive a text message, a notification message and the
unopened letter icon ( ) appear in the display.
When you have unopened messages in your inbox,
upper left corner of the start screen as a reminder.
is shown in the
26
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 27 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
1. Select Show to read the message, or Exit to dismiss notification.
2. Scroll up and down to view the whole message if necessary.
Options when reading messages
When you read a text message, depending on the features supported
by your wireless service provider, some or all of the following options
are available:
Delete—Discard the message.
Reply—Reply to the message. Create the message, and select
Options > Send.
Use number—Choose Save, Add to contact, Send message, or Call.
Save—Save the message to a folder.
Forward—Forward the message to another phone number.
Rename—Edit the title of the message.
Reply to messages
1. Select Show to read the message.
2. Select Options > Reply.
3. Select a Start reply with option, then compose your reply using
the keypad.
4. Select Options > Send.
Templates
Templates are short, prewritten messages that can be recalled and inserted
into new text messages when you are short on time.
1. At the start screen, select Menu > Messages > Text messages >
Create message > Add number or Add e-mail.
2. Enter the recipient’s phone number; or e-mail address, or select
Search to retrieve a number from your contacts list, and select OK.
3. Repeat step 2 to add more recipients, and select OK.
4. Select Options > Enter text > Options > Use template and one of the
available templates.
5. Enter the text into your new message, and select Options > Send.
27
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 28 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Change sending options
Some or all of the following options may be available as determined by
your carrier.
1. At the start screen, select Menu > Messages > Text messages >
Message settings > Sending options.
2. Select the setting you wish to change:
Priority—Set the priority of the note as Normal or Urgent.
Delivery note—A note is sent to you confirming delivery of the
message. Select On or Off.
Send callback number—A callback number is sent to the recipient.
Select Off or your phone number.
Change message settings
1. At the start screen, select Menu > Messages > Text messages >
Message settings > Other settings.
2. Select the setting you wish to change:
Message font size—Select Small font or Large font.
Message overwriting—Select Sent items only, Inbox only, S. items &
Inbox, or Off.
When the message memory is full, your phone cannot send or receive
any new messages. However, you can set your phone to automatically
overwrite selected messages in the Inbox and/or Sent items folders
when new messages arrive.
Save to Sent items as sending—Select Always save, Always prompt,
or Off.
I Voice messages
If you subscribe to voice mail, your wireless provider will furnish you
with a voice mailbox number. You need to save this number to your
phone to use voice mail. When you receive a voice message, your device
displays a notification, and may beep or vibrate. If you receive more than
one message, your phone shows the number of messages received.
28
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 29 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number
to your phone. If so, the number will appear in the display in step 1.
Select OK to leave the number unchanged.
1. In the standby mode, select Menu > Messages > Voice messages >
Voice mailbox number.
2. If the number entry window is empty, enter the voice mailbox area
code and number you received from your service provider.
3. Select OK.
Call and set up your voice mail
1. Once you have saved the voice mailbox number, press and hold 1 at
the start screen.
2. When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to set up your voice mail.
See also Set up phone number with dialing codes, 41.
Listen to your voice messages
Once you have set up voice mail, you can dial the voice mailbox number
in one of four ways:
• Dial the number using the keypad.
• Press and hold 1.
• Select Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages >
Listen to voice messages.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called dialing codes into phone numbers
such as voice mail, and save the number to a 1-touch dialing location.
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
29
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 30 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider
for specific instructions for using your voice mail service.
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your step-by-step interaction with the recorded prompts.
Keep in mind that each voice mail service may vary. However, it should
look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, enter
1234, press #.
Be precise; you will need this information in Set up phone number with
dialing codes, 41.
I Message folders
Save messages to folders
You can save drafts of messages or received messages to an existing
folder or to a folder that you have created.
1. Open the received message or create a new message, and select Options.
2. Select Save message > Sent items, Archive, Template, or a folder you
have created on your own.
• If you are saving messages from your inbox, open the message,
select Options > Save message and selectSent items, Archive or
Template folder.
• If you are saving messages from Sent items, open the message,
select Options > Save message and select Archive or Template.
• If you are saving messages from Template, select Options > Save
message and select Sent items or Archive.
View saved messages
1. At the start screen, select Menu > Messages > Text messages.
2. Select the folder containing the message you wish to view:
30
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 31 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Inbox—Messages are automatically stored in this folder after they
have been read or if you select Back when the message notification
appears on the start screen.
Sent items—Messages that have been sent are automatically stored
in this folder.
Archive—Store messages that have been read and that you want to
keep in this folder.
Templates—Pictures and prewritten templates are stored in this folder.
Preloaded templates can be edited and customized.
My folders—Keep your messages organized by creating custom folders
and saving some of your messages here. Select My folders > Options >
Add folder and enter a folder name at the prompt to add a custom
folder. Highlight the folder and select Rename folder or Delete folder
to rename or delete a folder you have created.
Only folders created in My folders can be deleted. The Inbox, Sent items,
Archive, and Templates folders are protected. When you delete a folder,
all messages in the folder are also deleted.
3. When the folder opens, select the message you wish to view.
I Delete messages
If your message memory is full, Message overwriting setting isoff, and you
have more messages waiting at the network, No space for new messages
appears on the start screen. You can do the following:
• Read some of the unread messages, and delete them individually.
• Delete messages from some of your folders.
Delete a single message
1. At the start screen, select Menu > Messages > Text messages.
2. Select the folder containing the message you wish to delete.
3. Select the message you wish to delete.
4. Select Options > Delete.
5. Select OK to delete the message or Back to exit.
31
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 32 Tuesday, January 25, 2005 10:05 AM
M e s s a g e s
Delete all messages in a folder
1. At the start screen, select Menu > Messages > Text messages >
Delete messages.
2. Select the option or folder containing the messages you wish to delete:
All—Deletes all messages in all of the folders.
All read—Deletes any messages that have been read in all of the folders.
All unread—Deletes any messages that have not been read in all of
the folders.
Inbox—Deletes all messages from the Inbox folder.
Sent items—Deletes all messages from the Sent items folder.
Archive—Deletes all messages from the Archive folder and all user
created folders.
User defined folders—Deletes all messages from user defined folders
that the user has added under My folders.
3. Select OK to delete the messages.
32
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 33 Tuesday, January 25, 2005 10:05 AM
E x t r a V i r g i n
6. Extra Virgin
Your device has access to Extra Virgin, which includes selected services on
the mobile Internet. You can access popular features, exclusive music,
entertainment, information services, and much more.
Extra Virgin is updated frequently. Check the Virgin Mobile web site at
virgin.com/mobile, for availability and pricing.
I Sign on to Extra Virgin
At the start screen, select Menu > Extra Virgin.
After a brief pause, your device attempts to connect to Extra Virgin. If you
receive an error message, your device may not be set up for browsing.
Contact your wireless provider to make sure that your device is
configured properly.
Your device cannot receive incoming calls when in Extra Virgin. Incoming
calls are automatically forwarded to voice mail.
I Navigate Extra Virgin
Since your device screen is much smaller than a computer screen, the
content is displayed differently from what you may be accustomed to
seeing. This section contains guidelines for using device keys to navigate
the site.
Device keys
•
To browse the site, scroll up or down.
• Select a highlighted item.
• To enter letters and numbers, press a key from 0–9.
• To enter special characters, press *.
33
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 34 Tuesday, January 25, 2005 10:05 AM
E x t r a V i r g i n
Make an emergency call while online
You can end your data connection, then make an emergency call.
1. To close your connection, press End.
2. Press End as many times as needed to clear the display and ready the
device for calls.
3. Enter the emergency number for your present location (for example,
911). Emergency numbers vary by location.
4. Press Call.
Disconnect
To close your Extra Virgin connection, press and hold End.
34
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 35 Tuesday, January 25, 2005 10:05 AM
C a l l H i s t o r y
7. Call History
Call History stores information about the last 20 missed, 20 incoming,
and 20 outgoing calls. When the number of calls exceeds the maximum,
the most recent call replaces the oldest.
Whether viewing missed, incoming, or outgoing calls, the menu options
are the same:
Call time—Display the date and time of the call.
Send message—Send a message to the number.
View number—Display the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing entry in your contacts
list, if the number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
I View outgoing calls
Outgoing calls are previous numbers you have dialed from your phone:
1. At the start screen, press Call.
OR
At the start screen, select Menu > Call History > Outgoing calls.
2. Scroll to a name or number, and select Options.
3. Select an option to activate.
I View incoming calls
Incoming calls are calls that have been answered.
1. At the start screen, selectMenu > Call History > Incoming calls.
2. Scroll to a name or number, and select Options.
3. Select an option to activate.
35
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 36 Tuesday, January 25, 2005 10:05 AM
C a l l H i s t o r y
I View missed calls
The missed calls feature does not function when your phone is switched off.
Missed calls are calls that were never answered.
1. If the missed call notification appears in the display, select List.
2. When the phone number appears in the display, select Options.
3. Select an option to activate.
OR
1. At the start screen, select Menu > Call History > Missed calls.
2. Scroll to a name or number, and select Options.
3. Select an option to view or activate.
I Delete recent call lists
You can delete any missed, outgoing, or incoming calls from phone memory.
1. At the start screen, select Menu > Call History > Delete recent call lists.
2. Select the call type you would like to clear: All, Missed calls, Incoming
or Outgoing.
I View call times
You can make or receive calls to or from the same number and view up
to five calls with the time each call occurred. Your phone clock must be
set for this feature to work accurately.
1. At the start screen, select Menu > Call History > Outgoing calls,
Incoming calls, or Missed calls.
2. Scroll through the recent calls to highlight a number, then select
Options > Call time to view the time and date the selected call occurred.
I Minibrowser calls
Minibrowser is a network service used to access Extra Virgin and downloads.
See Sign on to Extra Virgin, 33. With this feature, you can view the size
or duration of sent or received data from the minibrowser.
36
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 37 Tuesday, January 25, 2005 10:05 AM
C a l l H i s t o r y
Note: The actual time invoiced for calls and services by your service
provider may vary, depending on network features, rounding off
for billing, taxes, and so forth.
At the start screen, select Menu > Call History > Minibrowser calls and
one of the following options:
Last sent browser data—View the size (KB) of the last sent browser data.
Last received browser data—View the size (KB) of the last received data.
All sent browser data—View the size (KB) of all sent browser data.
All received browser data—View the size (KB) of all received browser data.
Last browser session—View the duration time of the last browser session.
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser logs.
37
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 38 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
8. Contacts
The contacts list can hold up to 250 contacts with multiple numbers and
text notes for each contact. The amount of numbers and text entries
that you can save may vary, depending on length and the total number
of entries in the contacts list.
I Search
At the start screen, scroll down or select Contacts > Search. Type the
first character of your contact entry to begin searching. Select the contact
you wish to view and select Details. Press Call to place a call or select
Options and the action you want to apply to the contact.
I Add new contacts
Save a name and number
1. At the start screen, use the keypad to enter the phone number you
wish to save.
2. Select Options > Save.
3. Enter the name, and select OK.
Save (only) a number
1. At the start screen, use the keypad to enter the phone number you
wish to save.
2. Press and hold Options.
Save an entry
1. At the start screen, select Contacts > Add new.
2. Enter the name, and select OK.
3. Enter the phone number, and select OK > Done.
38
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 39 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Save multiple numbers and text items
You can save different types of phone numbers and short text items per
name to the phone memory. The first number you save for any entry is
automatically set as the primary number, but the primary number can
always be changed.
1. At the start screen, scroll down to the entry to which you wish to add
a phone number or text item.
2. Select Details > Options > Add number or Add detail.
3. If you selected Add number, select General, Mobile, Home, Work, or Fax.
If you selected Add detail, select E-mail , Web address, Street addr.,
or Note.
4. Enter the number or text for the type you have selected, and select OK.
5. To change the type, highlight the entry and select Options >
Change type.
You can also change which phone number is the primary number for the
contact entry.
1. At the start screen, scroll down to the entry you wish to change, and
select Details.
2. Scroll to the number you wish to set as primary number, and select
Options > As primary no..
Caller groups
You can add contacts list entries to any of five caller groups, and assign
a unique ringing tone or graphic to that group. This enables you to
identify callers from the group by their unique ringing tone or graphic.
Set up a group
1. At the start screen, scroll down to display a list of entries in your
contacts list and select a name you would like to add to a caller group.
2. Select Details.
3. Select Options > Caller groups, and select the caller group to which
you would like to add the name.
39
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 40 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Options
1. At the start screen, select Contacts > Caller groups.
Family, VIP, Friends, Business, and Other are the available caller groups.
2. Select a group to display the following caller group options:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off or view
the graphic.
Group members—Add or remove members from the caller group.
Set up speed dialing
You can associate any entry in the contacts list with a key from 2–9; to
dial those entries, press and hold the assigned key. See Speed dialing, 51
to activate or deactivate speed dialing.
Assign a key to speed dialing
1. At the start screen, select Contacts > Speed dials.
2. Scroll to an (empty) speed dialing slot, and select Assign.
3. Enter the number (including the area code), and select OK, or select
Search to retrieve a number from the contacts list.
4. Enter a name for the number, and select OK.
If speed dialing is off, the phone displays a prompt asking if you would
like to turn speed dialing on.
5. Select Yes to activate speed dialing.
Change speed dialing numbers
1. At the start screen, select Contacts > Speed dials.
2. Scroll to the speed dialing entry you wish to change, and select
Options > Change.
3. Enter the new number; or select Search to retrieve a number from
the contacts list. Select OK.
4. Enter a name for the entry, and select OK.
40
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 41 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Delete speed dialing numbers
1. At the start screen, select Contacts > Speed dials.
2. Scroll to the speed dialing location you wish to delete, and select
Options > Delete > OK to delete the key assignment.
Dialing codes
Dialing codes instruct the receiving system to pause, wait, bypass, or
accept the numbers that follow them in the dialing string.
Press * repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the
dialing string.
The following dialing codes are available:
* —Bypasses a set of instructions.
+—International access code is replaced by a +.
p—Pauses for 2.5 seconds before sending any numbers that follow.
w—Waits for you to press Call before sending the numbers or codes
that follow.
Set up phone number with dialing codes
1. Enter your phone number, including the area code.
2. Refer to dialing codes and enter any codes as necessary.
For example, if you pause for 5 seconds after connecting to voice
mail, enter p twice after the voice mailbox number, for example,
2145551212pp.
3. Enter any remaining pauses or other information that allows you to
make your call, and select OK.
4. Enter a name at the prompt (such as Voice Mail), and select OK.
I Edit contacts list entries
1. At the start screen, scroll down to display the contents of your
contacts list.
2. Scroll to the entry you would like to edit, and select Details.
41
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 42 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Edit phone number
1. Highlight the phone number you would like to edit and select Options.
2. Select one of the following options, and select OK.
Add voice tag—Add a voice tag to the contact.
Edit number—Edit an existing phone number of the contact.
Delete number—Delete a phone number from the contact.
Use number—Display the phone number on the start screen, ready to
be called.
View —View the details of the contact.
Change type—Change the number type to General, Mobile, Home,
Fax,, or Work.
As primary no.—Change the primary number of the contact.
Add number—Add a number to the contact.
Add detail—Add an address or note to the contact.
Caller groups—Add the contact to an existing caller group.
Custom tone—Add a custom ring tone to the contact.
Send bus. card—Send the contact as a business card to another phone.
Send message—Create and send a message to the contact.
Speed dial—Add the contact to your speed dial list.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire contact entry from your contacts list.
Edit e-mail address
1. Highlight the e-mail address entry you would like to send or update
and select Options.
2. Select one of the following options, and select OK.
Send e-mail—Send an e-mail to the contact.
Edit detail—Edit existing details of e-mail.
Delete detail—Delete existing e-mail.
View—View the details of the e-mail contact.
42
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 43 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Change type—Change the type to General, Mobile, Home, Office,
Web address, Postal addr, or Note.
Add detail—Add an address or note to the entry.
Add number—Add a number to the entry.
Caller groups—Add the e-mail to an existing caller group.
Custom tone—Add a custom ring tone to the contact.
Send bus. card—Send the contact a business card.
Edit name—Edit the name of the contact.
View name—View the name of the contact.
Delete—Delete the entire e-mail entry from your contacts list.
I Delete contacts list entries
1. At the start screen, select Contacts > Delete.
2. To delete individual entries, select One by one.
3. Scroll to the entry you wish to delete, and select Delete > OK to confirm.
4. To delete the entire contents of your contacts list, select
Delete all > Select.
5. Select OK to confirm or Back to return to Delete options. If OK, enter the
lock code, and select OK. See Security settings, 61 for more information.
I View the contacts list
1. At the start screen, select Contacts. The following options are displayed:
Search—Find a name or select from a list.
Add new—Add a contact to your contacts list.
Edit name—Edit an existing name.
Delete—Delete a name and its associated numbers.
Add number—Add a number to an existing name.
Settings—Change the contacts list view, check the memory status of
your phone.
Speed dials—View or modify the list of Speed dialing numbers.
Voice tags—View, listen to, or modify a voice tag to a contact in the
contacts list.
43
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 44 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
My phone no.—View your own phone number.
Caller groups—View and edit the properties for any of the caller groups,
including Family, VIP, Friends, Business, or Other.
2. Select an item to activate the feature or enter its submenu.
Fast search for a name
1. At the start screen, scroll down to display the contents of your
contacts list.
2. Press the key that corresponds to the first letter of the name for
which you are performing a search.
3. Scroll up and down to select a contact, and select Details to view
the details.
Voice dialing
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note that:
• Voice tags are not language dependent. They are dependent on the
speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and
use them in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar
names for different numbers.
Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all
circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first record and assign a
voice tag to the number.
1. At the start screen, scroll down to enter the contacts list.
2. Highlight the contact you want to assign a voice tag, select Details >
Options > Add voice tag > Start.
44
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 45 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
3. Speak clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device automatically stops recording and saves and replays the
voice tag. The
tags assigned.
icon appears next to commands which have voice
If recording is not successful, your device displays Voice system error.
Select Options > Add voice memo, and repeat Step 3.
Dial a number using voice tag
At the start screen:
1. Press and hold Contacts.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the device finds the voice tag, Found: appears, and the device
automatically dials the number. If the device does not locate a number
or recognize the voice tag, No match found appears.
Playback voice tag
1. Select Menu > Contacts Voice tags.
2. Choose Select, and scroll to the name with the voice tag you want
to hear.
3. Select Options > Playback.
Change voice tag
1. Select Menu > Contacts > Voice tags.
2. Select Select, and scroll to the name with the voice tag you want
to change.
3. Select Options > Change.
4. Select Start and speak clearly into the microphone. The device repeats
your voice tag, and Voice tag saved appears.
Delete voice tag
1. Select Menu > Contacts > Voice tags.
2. Select the contact with the voice tag you want to erase.
3. Select Options > Delete > OK.
45
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 46 Tuesday, January 25, 2005 10:05 AM
C o n t a c t s
Configure settings
You can select how the contacts appear in your contacts list and view
the amount of memory used or available in your phone.
At the start screen, select Contacts > Settings and select one of the
following options:
Scrolling view—To select how names and numbers stored in the contacts
list are viewed. Select Name list, or Name and no. view.
Memory status—View the amount of memory used in phone book.
For more information on used and available memory, see
Shared memory, 6.
I Send and receive contacts (business cards)
You can send and receive an entry in your contacts list using text
messaging, if supported by your wireless provider.
Send a business card
You can send a business card as a text message to a compatible phone
or other handheld device.
1. Highlight the entry from the contacts list that you wish to send.
2. Select Details > Options > Send bus. card > Via text msg. > Primary no.
or All details.
The Primary no. or All details options appear only if you have more than
one number or detail saved to the contact entry.
3. Enter the number for your recipient, or select Search to retrieve a
number from your contacts list.
4. Select OK and the business card is sent.
46
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 47 Tuesday, January 25, 2005 10:05 AM
M y S t u f f
9. My Stuff
You can save pictures to folders in My Stuff and add new folders to the
ones already there.
Only devices that offer compatible multimedia message features can
receive and display multimedia messages.
Your device has a certain amount of memory for storing files. If the device
displays a message that the memory is full, delete some existing files from
My Stuff before proceeding.
I Open My Stuff
At the start screen, select Menu > My Stuff. The following submenus
are displayed:
View folders—Explore the folders in the My Stuff menu. See View folders
in the following section for more info.
Add folder—Add a folder of your own.
Delete folder—Delete a folder you have created.
Rename folder—Rename a folder you have created.
Get New—Download new content such as tones and graphics from your
service provider.
I View folders
1. At the start screen, select Menu > My Stuff > View folders > Images,
Graphics, Tones, or a folder you have created > Open.
2. Scroll through the list of graphics or tones, select Options > Open,
Delete, Move, Rename, Set as wallpap. (for graphics or image files), Set
as ring tone (for tone files), Details, or Sort to enter the folder submenus.
47
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 48 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
10. Settings
Use this menu to change the profiles, voice navigation, call settings, phone
settings, display settings, time settings, tone settings, phone details,
enhancement settings, security settings, network services, network
settings, and to restore the factory settings.
I Profiles
Profiles define how your phone reacts when you receive a call or message,
how your keypad sounds when you press a key, and more. Ringing options,
keypad tones, and other settings for each of the available profiles can be
left at their default setting, or customized to suit your needs. The following
profiles are available: Normal, Silent, Meeting, Outdoor, and Pager.
Profiles are also available for enhancements such as a headset and
car kit. See Enhancement settings, 59 for more information about
enhancement profiles.
Activate a profile
1. At the start screen, select Menu > Settings > Profiles.
2. Select the profile of your choice, then Activate.
Customize a profile
You can customize any of the profiles a variety of ways.
1. At the start screen, select Menu > Settings > Profiles.
2. Select the profile you wish to customize, then Customize.
3. Select the option you want to customize: Incoming call alert,
Ringtone, Ringtone volume, Vibrating alert, Message alert tone,
Keypad tones, Warning tones, Alert for, or Profile name.
You cannot rename the Normal profile.
Select Alert for to set the phone to ring only upon calls from numbers
that belong to a selected caller group. Scroll to the caller group you
want or select All Calls and select Mark or Unmark > Done.
48
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 49 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, suppose
you attend an event that requires your phone be set to Silent before the
event starts, but you forget to return it to Normal until long after the
event. A timed profile can prevent missed calls by returning your phone
to the default profile at a time you specify.
Timed profiles can be set up to 24 hours in advance.
1. At the start screen, select Menu > Settings > Profiles.
2. Select the profile you wish to activate and select Timed.
3. Enter the time for the profile to expire and select OK.
I Voice navigation
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the
device function.
1. At the start screen, select Menu > Settings > Voice navigation.
2. Select the device function you wish to tag (Profiles, Voice mailbox,
Voice memo or Call History).
3. If necessary, scroll to an option associated with that function, select
Options > Add command.
4. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag. The
to commands which have voice tags assigned.
icon appears next
Activate a voice command
After you have associated a voice tag with a device function, you can
issue a command by speaking the voice tag.
1. Press and hold Contacts.
2. When Speak now appears, pronounce the voice tag clearly into
the microphone.
49
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 50 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
When the device finds the voice tag, Found appears, and the device plays
the recognized voice tag through the earpiece. The function you requested
is activated.
Options
After you have associated a voice tag to a command, you can select one
of the following options:
Playback—Listen to the voice command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
I Call settings
Location info sharing
Location info sharing is a network service. See Network services, 5 for
more information.
If your wireless service provider supports this feature, then location info
sharing allows the phone to share position information over the network.
For calls to emergency numbers, this position information may be used
by the emergency operator to determine the position of the phone. The
functionality and accuracy of this feature is dependent on the network,
satellite systems, and the agency receiving the information. It may not
function in all areas or at all times.
At the start screen, select Menu > Settings > Call settings > Location
info sharing > Emergency or On > OK.
Emergency - This is the default profile. The phone location information is
shared only during an emergency call to the official emergency number
programed into your phone. The phone screen displays
in the upper
left–hand corner of the start screen.
On - The phone location information is shared with the network whenever
the phone is powered on and activated. The screen displays
in the
upper left-hand corner of the start screen.
50
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 51 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Location information will always be shared with the network during
emergency calls to the official emergency number programed into the
phone, regardless of which setting is selected. After placing an emergency
call the phone remains in emergency mode for five minutes. During this
time, the location information will be shared with the network. For more
information, see Emergency calls, 83.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing
any key except the Power key, Right selection key, or End key.
At the start screen, select Menu > Settings > Call settings > Anykey
answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a
fast busy signal when you dial. With automatic redial activated, your
phone redials the number (number of times is specified by the network),
and the call is successful or is terminated.
At the start screen, select Menu > Settings > Call settings > Automatic
redial > On or Off.
Speed dialing
You can activate or deactivate speed dialing. At the start screen, select
Menu > Settings > Call settings > Speed dialing > On or Off. For more
information on entering speed dialing numbers, see Set up speed
dialing, 40.
Automatic update of service
Your phone is capable of receiving updates to wireless services sent to
your phone by your service provider. Automatic update of service is a
network service.
At the start screen, select Menu > Settings > Call settings > Auto-update
of service > On or Off.
51
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 52 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Minibrowser confirmation
You can give confirmation when you connect or disconnect from
the minibrowser.
1. At the start screen, select Menu > Settings > Call settings >
Minibrowser confirmation.
2. Scroll to one of the following options, and press Select:
None—The phone will not ask for confirmation before connecting or
disconnecting from the minibrowser.
On connection—Your phone asks for confirmation before connecting
to the minibrowser.
On exit—Your phone asks for confirmation before disconnecting from
the minibrowser.
Both—Your phone asks for confirmation before connecting or
disconnecting from the minibrowser.
Calling card
If you use a calling card for long distance calls, you can save the calling
card numbers in your phone. Your phone can store up to four calling cards.
Contact your calling card company for more information.
Save information
1. At the start screen, select Menu > Settings > Call settings > Calling card.
2. Enter your lock code, and select OK. See Change lock code, 62 for
more information.
3. Scroll to one of the four card memory locations, and select Options >
Edit > OK > Dialing sequence and one of the following sequence types:
Access no.+ phone no.+ card no.—Dial access number, phone number,
then card number (+ PIN if required)
Access no.+ card no.+ phone no.—Dial access number, card number
(+ PIN if required), then phone number
Prefix+ phone no.+ card no.—Dial the prefix (numbers that must
precede the phone number) and phone number you want to dial,
then card number (+ PIN if required)
52
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 53 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
4. Enter the required information (access number or prefix and card
number), and select OK to confirm your entries.
5. Select Card name.
6. Enter the card name, and select OK.
Make calls
After you have saved your calling card information in your device, you
can make a call using your calling card.
1. At the start screen, selectMenu > Settings > Call settings > Callingcard.
2. Enter your lock code, and select OK. See Change lock code, 62 for
more information.
3. Scroll to the calling card of your choice, select Options > Select > OK.
4. Press End to return to the start screen; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require
when you make a calling card call.
See your calling card for instructions.
5. Press and hold Call for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.
Call summary
Your phone can display the time spent on a call when you hang up.
At the start screen, select Menu > Settings > Call settings > Call summary >
On or Off.
I Phone settings
Phone language
1. At the start screen, select Menu > Settings > Phone settings >
Phone language.
2. Select the language of your choice.
The phone language may affect the time and date formats of the clock,
alarm clock, and calendar.
53
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 54 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Automatic keyguard
You can set the keypad of your device to lock automatically after a
preset time delay (from 5 seconds to 60 minutes).
1. At the start screen, select Menu > Settings > Phone settings >
Automatic keyguard > On or Off.
2. If you select On, Set delay appears in the display.
3. Enter the delay (in minutes and seconds), and select OK.
When keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Enter the emergency number,
and press Call. The number is displayed only after you have keyed in its
last digit.
Touch tones
Touch tones or DTMF tones, are the tones that sound when you press the
keys on your device keypad. You can use touch tones for many automated
dial-up services such as banking and airlines, or for entering your voice
mailbox number and password.
Touch tones are sent during an active call. You can send them manually
from your device keypad, or send them automatically by saving them in
your device.
Set type
1. At the start screen, select Menu > Settings > Phone settings > Touch
tones > Manual touch tones.
2. Select one of the following options:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch
tone length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
At the start screen, select Menu > Settings > Phone settings > Touch
tones > Touch tone length > Short (0.1 seconds) or Long (0.5 seconds).
54
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 55 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Welcome note
You can write a welcome note which briefly appears on the display screen
whenever you switch your device on.
Predictive text input is not available for entering welcome note text.
1. At the start screen, select Menu > Settings > Phone settings >
Welcome note.
2. Enter a note (up to 44 characters).
Press * to display and select from available special characters.
3. When you are finished, select Options > Save.
OR
Select Delete if you want to delete the previous text and begin creating
another welcome note.
Help text activation
Your device displays brief descriptions for most menu items. When you
arrive at a feature or menu, pause for about 10 seconds and wait for the
help text to display. Use the scroll keys to page through the full help text,
if necessary.
The default setting for help text activation is on. However, you can turn
help text activation on or off.
At the start screen, select Menu > Settings > Phone settings > Help text
activation > On or Off.
I Display settings
Wallpaper
You can set your device to display a background picture (wallpaper) on
the start screen.
1. At the start screen, select Menu > Settings > Display settings >
Wallpaper > Select wallpap.
2. Highlight any relevant folder, and select Open.
3. Browse the folder.
55
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 56 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
4. When you arrive at the image of your choice, select Options >
Set as wallpap.
To activate or deactivate wallpaper, at the start screen, select Menu >
Settings > Display settings > Wallpaper > On or Off.
Color schemes
You can change the color of some display components in your device,
such as indicators and signal bars.
1. At the start screen, select Menu > Settings > Display settings >
Color schemes.
2. Select the color scheme of your choice.
My banner
If your wireless service provider supports this feature, you can choose
whether the display shows the operator logo or your own banner in text
when the device is in the idle state.
At the start screen, selectMenu > Settings > Displaysettings > My banner >
Default or Customize.
Display brightness
You can change the brightness of your device display.
1. At the start screen, select Menu > Settings > Display settings >
Display brightness.
2. Scroll left or right to adjust the brightness level to your preference.
3. Select OK to accept your settings.
Screen saver time-out
If you have turned the screen saver on, the screen saver is activated when
no function of the device is used after a preset period of time. Press any
key to deactivate the screen saver. You can set your device to display a
screen saver after a preset time or after a custom time (up to 60 minutes)
of your choosing.
1. At the start screen, select Menu > Settings > Display settings >
Screen saver time-out and the option of your choice.
2. If you want to set a custom time (up to 60 minutes), select Other,
enter the custom time, and select OK.
56
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 57 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Backlight time-out
You can change the time-out value for the phone's backlight.
1. At the start screen, select Menu > Settings > Display settings >
Backlight time-out.
2. If you want to set a custom backlight time-out (up to 30 seconds),
select Always on, Always off, 7 seconds, 15 seconds, or 30 seconds.
If you select Always on, the backlight times out after 4 minutes. This
option is designed for handsfree application and may deplete the
battery faster.
I Time and date settings
Clock
Show or hide the clock
At the start screen, select Menu > Settings > Time settings > Clock >
Show clock or Hide clock.
Set the time
1. At the start screen, select Menu > Settings > Time settings > Clock >
Set the time.
2. Enter the time (in hh:mm format), and select OK.
3. Select am or pm (if 12-hour format is selected).
Change the format
At the start screen, select Menu > Settings > Time settings > Clock >
Time format > 24-hour or 12-hour.
Date
Show or hide the date
At the start screen, select Menu > Settings > Time settings > Date >
Show date or Hide date.
Set the date
1. At the start screen, select Menu > Settings > Time settings > Date >
Set the date.
2. Enter the date, and select OK.
57
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 58 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Change the date format
1. At the start screen, select Menu > Settings > Time settings > Date >
Date format.
2. Select the format of your choice.
Change the date separator
1. At the start screen, select Menu > Settings > Time settings > Date >
Date separator.
2. Select the date separator of your choice.
Auto-update
Auto-update is a network service. See Network services, 5 for
more information.
If your wireless service provider supports this feature, you can allow the
digital network to set the clock, which is useful when you are out of your
home area, for example, when you have traveled to another network or
time zone.
At the start screen, select Menu > Settings > Time settings > Auto-update
of date & time > On, Confirm first, or Off.
If you use the Auto-update of date & time option while outside your digital
network, you may be prompted to enter the time manually. Network time
will replace the time and date when you re-enter your digital network.
If your battery is removed or discharged outside the digital network, you
may be prompted to enter the time manually (once the battery is
replaced or recharged, and you are still outside of the digital network).
I Tone settings
From this menu, you can adjust the ringing volume, keypad tones, and
other tone settings for the currently active profile. See Customize a
profile, 48 for more information on profile settings.
I Phone details
From this menu, you can check details of your phone service. Select Menu >
Settings > Phone details > User details, Version details, or System details.
User details—Displays the mobile directory number (MSID) and own
number (MDN).
58
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 59 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Version details—Displays the Phone model, Hardware version, and
Software version of the phone.
System details—Displays the System ID, Channel, Pref. roaming list (PRL),
Mode, and Frequency of the phone service.
I Enhancement settings
At the start screen, select Menu > Settings > Enhancement settings >
Headset, Handsfree, Loopset, TTY/TDD (carrier dependent), or Charger.
Note: Headset, Handsfree, Loopset, and TTY/TDD appear on the
enhancement menu only if the device is connected to a compatible
enhancement. Otherwise, Charger is the only selection shown.
Headset
Scroll to the option of your choice, and press Select to enter the submenu
and modify its settings.
Default profile—Choose the profile you wish to be automatically activated
when a headset is connected.
Automatic answer—Calls are answered automatically after one ring when
a headset is connected. Select On or Off.
Handsfree
Scroll to the option of your choice, and press Select to enter the submenu
and modify its settings.
Default profile—Choose the profile you wish to be automatically activated
when your phone is connected to a car kit.
Automatic answer—Calls are answered automatically after one ring when
a car kit is connected. Select On or Off.
Lights—Choose to keep the phone lights always on, or to shut off
automatically after several seconds. Select On or Automatic.
Loopset
The LPS-4 Loopset (for use with T-coil equipped hearing aids) is
recommended for use with your phone. Scroll to the option of your
choice, and press Select to enter the submenu and modify its settings.
59
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 60 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Default profile—Choose the profile you wish to be automatically activated
when a loopset is connected.
Automatic answer—Calls are answered automatically after one ring when
a loopset is connected. Select On or Off.
TTY/TDD
Note: This feature is carrier dependent.
In addition to the Nokia phone, you will need the following for TTY/TDD
communication:
• A TTY/TDD device that is cellular ready or cellular compatible.
• A cable for connecting the TTY/TDD to your Nokia phone, usually
supplied by the manufacturer of the TTY/TDD device.
Set up the TTY/TDD profile
You can connect your phone directly to the TTY/TDD device. In order for your
phone to recognize the TTY/TDD, you will need to set up the TTY/TDD profile.
Important: Some manufacturers of TTY/TDD devices suggest that
the phone be at least 18 inches from the TTY/TDD device. When
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the 2.5-mm headset jack on the
side of your phone.
3. At the start screen, select Menu > Settings > Enhancement settings >
TTY/TDD > Use TTY > Yes.
TTY/TDD calls
• Check with the manufacturer of the TTY/TDD device for a connecting
cable that is compatible with the Nokia phone.
• TTY/TDD communications depend on network availability. Check
with your service provider for availability and description of services.
Make a call
1. At the start screen, enter the number, and press Call.
60
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 61 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
2. When the receiving party answers, begin typing your conversation on
the TTY/TDD.
3. Press End to end the call.
Receive a call
1. Make sure the TTY/TDD device is connected to your phone.
2. Press Call to answer the call, and type your responses on the TTY/TDD.
3. Press End to end the call.
Charger
Scroll to the option of your choice, and press Select to enter the submenu
and modify its settings.
Default profile—Choose the profile you wish to be automatically activated
when your phone is connected to the charger.
Lights—Choose to keep the phone lights always on, or to shut off
automatically after several seconds. Select On or Automatic.
I Security settings
Phone lock
The phone lock feature protects your device from unauthorized outgoing
calls or unauthorized access to information stored in the device. When
phone lock is activated, Phone locked is displayed each time you turn
your device on.
When the device is locked, calls still may be possible to the official
emergency number programed into your device.
1. In the standby mode, select Menu > Settings > Security settings >
enter lock code > OK.
2. Select Phone lock.
3. Select one of the following options:
•
•
•
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power up—Turns on the phone lock feature after power on.
61
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 62 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
If you selected On power up, you must enter your lock code and the lock
code must be accepted before the device will function normally. Call not
allowed is displayed if you attempt to place a call while device is locked.
To answer a call with phone lock on, select Answer or press Call.
Allowed number when phone locked
When phone lock is on, the only outgoing calls that can be made are to
the emergency number programed into your device (for example 911) or
the number stored in the Allowed number when locked location.
1. At the start screen, select Menu > Settings > Security settings >
enter lock code > OK.
2. Select Allowed number when locked.
3. Enter the phone number; or select Search, recall the number from
the phone book, and select OK.
Call the allowed phone number
1. At the start screen, dial a stored number or press the Scroll up or
Scroll down key to retrieve the first allowed number saved in
Allowed number when locked.
2. Press Call to place the call.
Change lock code
The preset lock code is the last four digits of your phone number. When you
change your lock code, make sure you store it in a safe place, away from
your device. Avoid entering access codes similar to emergency numbers
such as 911 to prevent accidental emergency calls.
1. At the start screen, select Menu > Settings > Security settings.
2. Enter the current (or default) lock code, and select OK. Select Change
lock code.
3. Enter the new lock code (must be 4 characters in length), and select OK.
4. Reenter the new lock code for verification, and select OK.
If you enter the wrong lock code 5 times in succession, you will not be able
to enter a code for 5 minutes, even if you power off the device between
incorrect entries.
62
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 63 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
Call restrictions
Call restriction is a network service. See Network services, 5.
If your wireless service provider supports this feature, you can restrict the
calls your device can make and receive. When calls are restricted, calls
still may be possible to the official emergency number programmed into
your device.
1. At the start screen, select Menu > Settings > Security settings.
2. Enter the lock code, and select OK. See Change lock code, 62 for
more information.
3. Select Call restrictions.
4. Select the types of calls you wish to restrict:
Restrict outgoing calls—Calls cannot be made.
Restrict incoming calls—Calls cannot be received.
5. Select an option (Select, Add restriction, Edit, or Delete).
Voice privacy
Voice privacy is a network service. If your wireless service provider
supports this feature, the voice privacy feature protects the privacy of
your current phone conversation from other callers placing phone calls
on your same network.
1. At the start screen, select Menu > Settings > Security settings.
2. Enter the lock code, and select OK. See Change lock code, 62 for
more information.
3. Select Voice privacy > On or Off.
I Network services
The following features are network services. See Network services, 5 for
more information.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another
number. Call forwarding is a network service and may not work the same
in all networks, so contact your wireless provider for availability.
63
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 64 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
1. At the start screen, select Menu > Settings > Network services >
Call forwarding > Forward all calls.
2. Select one of the following options:
Activate—Forward all calls to the number you specify.
Cancel—Cancel any call forwarding options you have set.
Store a feature code
1. At the start screen, select Menu > Settings > Network services >
Network feature setting.
2. Enter the feature code from your service provider (for example, *633),
and select OK.
3. Select the type of forwarding that matches the feature code you
entered (for example, Call forwarding).
The activated feature code is now stored in your device, and you are
returned to the Feature code field. Continue entering other feature
codes (for example, *633), or press End to return to the start screen.
Once you enter a network feature code successfully the feature becomes
visible in the Network services menu.
Own number selection
If your wireless service provider supports this feature, you can select the
number to be used if you have more than one number. In the standby mode,
select Menu > Settings > Network services > Own number selection and
press Select.
I Network
The network options you see in your device are based on your service
provider’s network. The network determines which options actually appear
in the device menu. Check with your service provider for more information.
Roaming options
The Roaming options menu allows you to customize the way your device
chooses a network in which to operate while you are within or outside
of your primary or home system. Your device is set to search for the most
64
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 65 Tuesday, January 25, 2005 10:05 AM
S e t t i n g s
cost-effective network. If your device cannot find a preferred network, it
selects a network automatically based on the option you choose in the
Roaming options menu.
You can set your device to roam or search for another network when you
are not in your home area.
1. At the start screen, select Menu > Settings > Network >
Roaming options.
2. Select one of the following options:
Home only—You can make and receive calls in your home area only.
Automatic—The device automatically searches for service in another
digital network. If one is not found, the device uses analog service.
The roaming rate applies when not in the home service area.
3. Select OK, if necessary, to confirm the activation.
Mode
The mode option allows you to select which service option your device
uses. You can set your device to search for a digital service first; then if
there is none available, search for an analog service.
1. In the standby mode, select Menu > Settings > Network > Mode.
2. Select on of the following service options:
Digital pref.—The device works in digital mode, but will also work in
analog mode when digital mode is unavailable.
Analog only—The device only works in analog mode.
I Restore factory settings
You can reset some of the menu settings to their original values. Data
that you have entered or downloaded is not deleted, for example, entries
in your contacts list are not affected.
1. At the start screen, select Menu > Settings > Restore factory settings.
2. Enter the security code, and press OK. See Security settings, 61 for
more information.
65
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 66 Tuesday, January 25, 2005 10:05 AM
T o o l s
11. Tools
Your device contains features to help organize your everyday life,
including an alarm clock, calendar, voice memo, calculator, countdown
timer, and stopwatch.
I Alarm clock
If the alarm time is reached while the device is switched off, the device
switches itself on and starts sounding the alarm tone. If you select Stop,
the device asks whether you want to activate the device for calls. Select
No to switch off the device or Yes to make and receive calls. Do not select
Yes when wireless phone use may cause interference or danger.
Set an alarm
The alarm clock is based on the device clock. It sounds an alert any time
you specify and works even if the device is turned off.
1. At the start screen, select Menu > Tools > Alarm clock > Alarm time.
2. Enter the time for the alarm (in hh:mm) format, and select OK.
3. Select am or pm (if 12-hour format is selected).
Alarm on appears briefly in the display and
appears on the
start screen.
Change the time
1. At the start screen, select Menu > Tools > Alarm clock >
Alarm time > On.
2. Enter the time for the alarm (in hh:mm) format, and select OK.
3. Select am or pm (if 12-hour format is selected).
Alarm on appears briefly in the display and
appears on the
start screen.
Set the alarm tone
You can set which tone is played when the alarm sounds.
1. At the start screen, select Menu > Tools > Alarm clock > Alarm tone.
2. Highlight Standard, Ring tone, or Open My Stuff and select the tone
of your choice.
66
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 67 Tuesday, January 25, 2005 10:05 AM
T o o l s
Alarm conditions
When the alarm sounds, your device beeps, vibrates (if vibrating alert is
on for the currently active profile), and the display lights up.
With the device on, select Stop to shut the alarm off, or select Snooze.
The alarm stops for 10 minutes and Snooze on appears in the display.
If you do not press a key, the alarm stops after one minute and snoozes
for 10 minutes, then sounds again.
Turn alarm off
At the start screen, select Menu > Tools > Alarm clock > Alarm time > Off.
I Calendar
The calendar keeps track of reminders, calls you need to make, meetings,
and birthdays. It can even sound an alarm for any of these events.
Monthly view provides an overview of the selected month and weeks. It
also allows you to jump to a specific date. Any days or dates that appear
in bold font contain calendar notes such as a meeting or reminder.
Open the calendar
At the start screen, select Menu > Tools > Calendar.
Go to a date
1. At the start screen, select Menu > Tools > Calendar > Options >
Go to date.
2. Enter the date (for example, 07/15/2004), and select OK.
Note a specific date
You can choose from five types of notes. Your device asks for further
information depending on which note you choose. You also have the
option to set an alarm for any note that you select.
1. Go to the date for which you want to set a reminder. See Go to a
date, 67.
2. From the monthly view (with the date highlighted), select Options >
Make a note.
67
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 68 Tuesday, January 25, 2005 10:05 AM
T o o l s
3. Select one of the following note types:
Meeting—You are prompted to enter a subject, location, and a start/
end time. You are then given the option to set an alarm.
Call—You are prompted to enter a phone number, a name, and the
time. You are then given the option to set an alarm.
Birthday—You are prompted to enter the person’s name, and year of
birth. You are then given the option to set an alarm.
Memo—You are prompted to enter a subject and an end date and
given the option to set an alarm.
Reminder—You are prompted to enter the subject you wish to be
reminded about and given the option to set an alarm.
4. Enter your note, and select Options > Save.
View notes (day view)
After you have created some calendar notes, you can view them as follows:
1. At the start screen, select Menu > Tools > Calendar.
2. Scroll to the date containing the note. (Any days containing notes
will be in bold font.)
3. Select Options > View day.
4. To view a highlighted note, select Options > View.
Options while viewing notes
Options while viewing the body of a note
Edit—Edit the note.
Delete—Delete the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-
weekly, monthly, and yearly).
Send note—Send the note to another device using text message, or in
calendar format.
Copy—Copy the note. You can then paste the note to another date.
Settings—Set the date and time, date and time format, the day each
week starts and whether you want your notes to auto-delete after a
specified time.
68
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 69 Tuesday, January 25, 2005 10:05 AM
T o o l s
Options while viewing the header of a note
View—View the full note.
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-weekly,
monthly, and yearly). Repeat is not available for Birthday note.
Go to date—Jump to another date on your calendar.
Send note—Send the note to another device using text message, or in
calendar format.
Copy—Copy the note. You can then paste the note to another date.
Settings—Set the date and time, date and time format, the day each
week starts and whether you want your notes to auto-delete after a
specified time.
Send a note
1. At the start screen, select Menu > Tools > Calendar.
2. Scroll to the date containing the note you wish to send. (Any days
containing notes will be in bold font.)
3. Select Options > View day.
4. Scroll to the note you wish to send, and select Options > Send note >
Via calendar or Via text msg.
5. If you selected Via calendar, enter the number for the recipient, or select
Search to retrieve a number from the contacts list, and select OK. The
note is sent.
6. If you selected Via text message, the note appears as a text message
in the display.
7. Select Add number.
8. Enter the number for the recipient, or select Search to retrieve a number
from the contacts list, and select OK.
9. Select Options > Send.
69
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 70 Tuesday, January 25, 2005 10:05 AM
T o o l s
Receive notes
When you receive a calendar note in calendar-to-calendar (vCal) format,
your device displays a notification that a calendar note arrived. Save the
note in your calendar and set an alarm for any date and time.
View notes
1. When your device displays a notification that a calendar note arrived,
select Show.
2. Scroll to view the entire message, if necessary.
Save notes
After viewing the calendar note, select Options > Save.
Discard notes
After viewing the calendar note, select Options > Discard.
I Voice memo
This feature allows you to record, save, and listen to voice memos. The total
available time is 30 seconds if no memos have been stored. The maximum
length of a recording depends on how much memory remains available.
Record speech or sound
1. At the start screen, select Menu > Tools > Voice memo > Record.
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, select Stop.
4. Enter the title you wish to assign to the recording, and select OK.
Your voice memo is saved to the Recordings list.
Options
After you have saved the recording to the Recordings list, highlight the
recording, and choose one of the following options:
Playback—Listen to the recording using the earpiece.
Delete—Erase the recording.
Edit title—Rename the recording.
Add alarm—Add an alarm to the recording.
70
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 71 Tuesday, January 25, 2005 10:05 AM
T o o l s
I Calculator
The calculator in your device adds, subtracts, multiplies, divides, calculates
the square and the square root, changes the sign of the number entered,
and converts currency values.
Note: This calculator has a limited accuracy and is designed for
simple calculations.
1. At the start screen, select Menu > Tools > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point if necessary.
To change the sign, select Options > Change sign or press the scroll
keys up and down.
To perform a square or square root calculation, select Options >
Square or Square root > Select.
Press * to cycle through the add (+), subtract (-), multiply (*), and
divide (/) characters.
3. Enter the second number in your calculation.
4. Select Options (equals is highlighted) > Select.
Currency converter
You can convert foreign currency to domestic, or vice versa, directly
from the start screen or from the Calculator menu.
1. At the start screen, enter a currency amount to convert, or select
Menu > Tools > Calculator and enter a currency amount to convert.
2. Select Options > To home or To foreign > Select.
To home—converts foreign currency to domestic currency.
To foreign—converts domestic currency to foreign currency.
If you have not done so already, you are prompted to enter the
exchange rate.
3. Enter the exchange rate (press # to insert a decimal), and select OK.
You can also edit the exchange rate at any time.
Note: When you change base currency, you must enter the new
rates because all previously set exchange rates are set to zero.
71
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 72 Tuesday, January 25, 2005 10:05 AM
T o o l s
1. At the start screen, select Menu > Tools > Calculator > Options >
Exchange rate > Foreign unit expressed in domestic units or Domestic
unit expressed in foreign units.
Foreign unit expressed in domestic units—the number of home units
it takes to make one unit of foreign currency.
Domestic unit expressed in foreign units—the number of foreign units
it takes to make one unit of your home currency.
2. Enter the exchange rate, and select OK.
I Countdown timer
You can enter a specified time (up to 99 hours and 59 minutes). When
the time runs out, your device sounds an alarm.
The countdown timer only works when the device is on. When you turn
off your device, the timer is no longer active.
Set the countdown timer
1. At the start screen, select Menu > Tools > Countdown timer.
2. Enter the time (in hh:mm format), and select OK.
3. Enter a note for the timer, and select OK.
The
icon appears on the start screen when the countdown timer is set.
When the time runs out, your device sounds an alarm, displays the timer
note, and flashes its lights.
• Press any key during the alarm to stop the timer.
• If you don’t press any key, after 30 seconds the alarm sound and flashing
will automatically cease, but the timer note remains displayed until
you press OK.
Change the time
After you have set the timer, you can change the time.
1. At the start screen, select Menu > Tools > Countdown timer >
Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select OK.
72
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 73 Tuesday, January 25, 2005 10:05 AM
T o o l s
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer.
At the start screen, select Menu > Tools > Countdown timer > Stop timer.
I Stopwatch
Your device has a stopwatch that can be used to track time. The stopwatch
displays time in hours, minutes, seconds and fractions of a second in
hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using
other features increases the demand on the battery and reduces the
battery life.
Measure time
1. At the start screen, select Menu > Tools > Stopwatch > Split timing
or Lap timing.
2. Select Start to begin. The running time is displayed on the screen.
3. Select Stop to end the timing. The total time is displayed on the screen.
4. Select Options > Save to save your time.
5. Enter a name for the measurement, and select OK.
If you do not enter a name, the total time is used as the default title for
the lap time.
Split time
You can use the split time function for such things as a long distance
race when you need to pace yourself.
When you start this option the timer begins. Each time you select Split,
the split time appears below the running time. If you split the time more
than once, the new measured time appears at the beginning of the list.
You can scroll to see previous measured times.
73
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 74 Tuesday, January 25, 2005 10:05 AM
T o o l s
Lap time
You can use the lap time function when you want to track how long it takes
to complete each cycle or lap. When you start this option, the timer begins.
Select Lap to note the lap time. The clock stops, then starts immediately
from zero. The lap time appears below the running time. If you take more
than one lap time, the new measured time appears at the beginning of
the list. You can scroll to see previous measured times. When you select
Stop, the total time appears at the top.
Operation note
If you press End and return to the start screen, the clock continues to
run in the background and the
icon appears in the upper left corner
of the screen.
To return to the stopwatch screens:
1. At the start screen, select Menu > Tools > Stopwatch > Continue.
2. To stop the clock, select Stop.
Options
You can choose the following options when using the stopwatch:
Continue—Shows up when the stopwatch is working in the background.
Show last time—Allows you to view the last measured time.
View times—Allows you to browse the saved times.
Delete times—Allows you to delete any saved times. You can delete the
saved times one by one or all at once.
74
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 75 Tuesday, January 25, 2005 10:05 AM
G a m e s
12. Games
I Play a game
1. At the start screen, select Menu > Games > Select game.
2. Scroll to a game, and press Call or select Options > Open.
3. Select one of the following options. Individual games may offer
additional options.
New game—Launches a new game.
High scores—View the high scores for this game (if previously played).
Instructions—View instructions for playing the game. Scroll down to
read more.
I Game choices
1. At the start screen, select Menu > Games.
2. Scroll to one of the following game submenus:
Select game—Select a game or enter a game option list. See Game
options, 75 for more information.
Game downlds.—Select and download new games and game-related
applications from your service provider.
Memory—Check the available memory for games and game-
related applications.
Settings—Turn Game sounds, Game lights, and Shakes on or off.
3. Select to enter the submenu, and choose other settings.
I Game options
1. While viewing the games list, select Options.
2. Scroll to an option (Open, Delete, or Details), and Select to activate
the option or enter a submenu.
75
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 76 Tuesday, January 25, 2005 10:05 AM
E n h a n c e m e n t s
13. Enhancements
Check the model number of any charger before
use with this device. This device is intended for
use when supplied with power from ACP-7U or
ACP-12U.
Warning: Use only batteries, chargers,
and enhancements approved by Nokia for use with this particular
model. The use of any other types may invalidate any approval or
warranty, and may be dangerous. For availability of approved
enhancements, please check with your dealer.
Your device and its enhancements may contain small parts. Keep them
out of reach of small children.
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of
small children.
• When you disconnect the power cord of any accessory or enhancement,
grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted
and are operating properly.
• Installation of any complex car enhancements must be made by
qualified personnel only.
Power
• Activity Headset (HS-8)
• Retractable Headset (HS-10)
Data
• Standard 1070 mAh Li-Ion
Battery (BL-6C)
• Standard Travel Charger (ACP-7U)
• Travel Charger (ACP-12U)
• Mobile Charger (LCH-12)
• Retractable Charger (AC-1U)
Audio
• Headset (HS-5)
• Boom Headset (HDB-4)
• Loopset (LPS-4)
• Data Cable (DKU-5)
• Data Cable (CA-42)
• Desk Stand with Sync (DCV-15)
Car
• Full Car Kit (CK-6)
• Advanced Car Kit (CK-7W)
• Mobile Holder (MBC-17)
• Mobile Lighter Charger (LCH-12)
• Fashion Headset (HS-3)
76
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 77 Tuesday, January 25, 2005 10:05 AM
B a t t e r y i n f o r m a t i o n
14. Battery information
This section provides information about your device’s batteries,
enhancements, chargers, safety guidelines and technical information. Be
aware that the information in this section is subject to change as batteries,
chargers, and enhancements change.
I Charging and discharging
Your device is powered by a rechargeable battery. The full performance of
a new battery is achieved only after two or three complete charge and
discharge cycles. The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the talk and standby times
are noticeably shorter than normal, replace the battery. Use only Nokia
approved batteries, and recharge your battery only with Nokia approved
chargers designated for this device.
Unplug the charger from the electrical plug and the device when not in
use. Do not leave a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
Use the battery only for its intended purpose. Never use any charger or
battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object such as a coin, clip, or pen causes direct connection
of the positive (+) and negative (-) terminals of the battery. (These look
like metal strips on the battery.) This might happen, for example, when
you carry a spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer
or winter conditions, will reduce the capacity and lifetime of the battery
and its ability to charge. Always try to keep the battery between 15°C and
25°C (59°F and 77°F). A device with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Battery performance
is particularly limited in temperatures well below freezing.
77
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 78 Tuesday, January 25, 2005 10:05 AM
B a t t e r y i n f o r m a t i o n
Do not dispose of batteries in a fire, as they may explode. Batteries may
also explode if damaged. Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as household waste.
I Charging time
The charging time for the BL-6C Li-ion battery (1070 mAh) is up to 3.75
hours using the ACP-7U charger.
I Standby and talk times
Battery talk and standby times are estimates only and depend on signal
strength, network conditions, features used, battery age and condition
(including the effect of charging habits), temperatures to which battery
is exposed, use in digital mode, and many other factors. The amount of
time a phone is used for calls will affect its standby time. Likewise, the
amount of time that the phone is turned on and in standby mode will
affect its talk time.
In digital mode:
Standby time—Up to 288 hours.
Talk time—Up to 4.85 hours.
I Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you
are getting an original Nokia battery, purchase it from an authorized
Nokia dealer, look for the Nokia Original Enhancements logo on the
packaging, and inspect the hologram label using the following steps.
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your
battery is not an authentic original Nokia battery, you should refrain
from using it and take it to the nearest authorized Nokia service point or
dealer for assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be verified,
return the battery to the place of purchase.
78
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 79 Tuesday, January 25, 2005 10:05 AM
B a t t e r y i n f o r m a t i o n
How do you check the security features on batteries with
hologram labels?
1.When looking at the hologram label, you should
see the Nokia connecting hands symbol from one
angle and the Nokia Original Enhancements logo
when looking from another angle.
2.When you angle the hologram to the left, right,
down, and up sides of the logo, you should see 1,
2, 3, and 4 dots on each side respectively.
3.Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210.
Turn the battery so that the numbers are facing
upwards. The 20-digit code reads starting from
the number at the top row followed by the
bottom row.
4.Confirm that the 20-digit code is valid by
verifying it at the Nokia website. Go to
www.nokia.com/batterycheck and follow
the instructions.
You should receive a message indicating whether
the code can be authenticated.
What if your battery is not verified as authentic?
If you cannot confirm that your Nokia battery with the hologram label is an
authentic Nokia battery, please do not use the battery, but take it to the
nearest authorized Nokia service point or dealer for assistance. The use
of a battery that is not approved by the manufacturer may be dangerous
and may result in poor performance and damage to your device and its
enhancements. It may also invalidate any approval or warranty applying
to the device.
To find out more about original Nokia batteries visit
79
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 80 Tuesday, January 25, 2005 10:05 AM
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage and enjoy your device for many years.
•
Keep the device and all of its parts and accessories out of the reach of
small children.
•
Keep the device dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits. If your device does
get wet, remove the battery and allow the device to dry completely before
replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
Use chargers indoors.
All of the above suggestions apply equally to your device, battery, charger, or
any enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
80
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 81 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
I Operating environment
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions. This device meets RF
exposure guidelines when used either in the normal use position against the ear
or when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry
case, belt clip, or holder is used for body-worn operation, it should not contain
metal and should position the device at least 7/8 inch (2.2 cm) away from your body.
In order to transmit data files or messages, this device requires a quality connection
to the network. In some cases, transmission of data files or messages may be delayed
untilsuch a connection is available. Ensure the above separation distance instructions
are followed until the transmission is completed.
I Medical devices
Operation of any radio transmitting equipment, including wireless devices, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any questions.
Switch off your device in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 6 inches
(15.3 cm) be maintained between a wireless device and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are consistent
with the independent research by and recommendations of Wireless Technology
Research. To minimize the potential for interference, persons with pacemakers should
•
Always keep the device more than 6 inches (15.3 cm) from their pacemaker
when the device is switched on
•
•
Not carry the device in a breast pocket
Hold the device to the ear opposite the pacemaker
If you have any reason to suspect that interference is taking place, switch off
your device immediately.
81
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 82 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
HEARING AIDs
Some digital wireless devices may interfere with some hearing aids. If interference
occurs, consult your service provider.
I Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
that may apply to the device. Check regularly that all wireless device equipment in
your vehicle is mounted and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same compartment as the device, its
parts, or enhancements. For vehicles equipped with an air bag, remember that an
air bags inflate with great force. Do not place objects, including installed or portable
wireless equipment in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
I Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine. Sparks
in such areas could cause an explosion or fire resulting in bodily injury or even
death. Switch off the device at refueling points such as near gas pumps at service
stations. Observe restrictions on the use of radio equipment in fuel depots, storage,
and distribution areas, chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or metal powders.
FCC regulations prohibit using your wireless device while in the air. The use of
wireless telephones in an aircraft may be dangerous to the operation of the aircraft,
disrupt the wireless telephone network, and may be illegal.
Failure to observe these instructions may lead to suspension or denial of telephone
services to the offender, legal action, or both.
82
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 83 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
I Emergency calls
Important: Wireless devices, including this device, operate using radio
signals, wireless networks, landline networks, and user-programed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
2. Press the End key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the Call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
83
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 84 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
I Certification information (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and establish permitted levels of
RF energy for the general population. The guidelines are based on standards that
were developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted
by the FCC with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (for example, at the ear and worn on the body) as
required by the FCC for each model. The following values are the highest SAR
values for this model phone as reported to the FCC:
When tested for use at the ear:
Nokia 6015i: 1.28 W/kg
When worn on the body, as described in this user guide:
Nokia 6015i: 1.00 W/kg
(Body-worn measurements differ among phone models, depending upon
available enhancements and FCC requirements).
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement.
84
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 85 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information on this model phone is on file with the FCC and can be found
on FCC ID:
QMNRH-55 for the Nokia 6015i phone
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines for use with a carry case, belt clip, or holder that contains no
metal and that positions the handset a minimum of 7/8 inch (2.2 cm) from the
body. Use of other carry cases, belt clips, or holders may not ensure compliance
with FCC RF exposure guidelines. If you do not use a body-worn enhancement
and are not holding the phone at the ear, position the handset a minimum of 7/8
inch (2.2 cm) from your body when the phone is switched on.
*In the United States and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements. SAR values may vary
depending on national reporting requirements and the network band. For SAR
information in other regions please look under product information at
85
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 86 Tuesday, January 25, 2005 10:05 AM
A d d i t i o n a l s a f e t y i n f o r m a t i o n
I Technical information
Dimensions—Width 1.96 in (49.9 mm); length 4.26 in (108.3 mm);
depth 0.91 in (23.2 mm)
Weight (Nokia 6015i)—3.87 oz (109.6 g) with BL-6C Li-Ion Battery
Volume—5.95 cu in (97.5 cu cm)
Frequency range (Tx)—AMPS 824.04–848.97; PCS 1851.25–1908.75 MHz;
Cellular 824.70–848.37 MHz
Frequency range (Rx)—AMPS 869.04–893.97; PCS 1931.25–1988.75 MHz;
Cellular 869.70–893.37 MHz
GPS Frequency (Nokia 6015i)—1575.42 MHz
I Patent information
Manufactured or sold under one or more of the following US patents:
D405445 5491718 5758278 5887250 6025802 6088342 6377813
D406583 5596571 5790957 5887252 6029065 6148209 6414640
D414189 5642377 5793744 5889770 6047071 6154455 6434186
D405784 5699482 5796757 5929813 6055264 6167038 6459689
D423515 5701392 5802465 5990740 6072787 6205325 6463031
4969192 5708656 5821891 5991627 6076181 6253075 6466173
5440597 5737323 5854978 6005889 6078570 6292474 6480700
5444816 5754976 5859843 6009129 6084471 6332083 6480155
6486835 6496150 6570909 6580771 6587685
Others
4558302 4901307 5056109 5101501 5109390 5265119 RE32580
86
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 87 Tuesday, January 25, 2005 10:05 AM
A p p e n d i x
A
M e s s a g e f r o m t h e C T I A C e l l u l a r
I n t e r n e t A s s o c i a t i o n t o a l l
T e l e c o m m u n i c a t i o n s
&
Appendix A Message from the CTIA
Cellular Telecommunications & Internet
Association to all users of mobile phones
© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.
1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: (202) 785-0081
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in North America take advantage of the unique
combination of convenience, safety and value delivered by the wireless telephone.
Quite simply, the wireless phone gives people the powerful ability to communicate
by voice—almost anywhere, anytime—with the boss, with a client, with the kids, with
emergency personnel or even with the police. Each year, North Americans make
billions of calls from their wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility.
A wireless phone can be an invaluable tool, but good judgment must be exercised
at all times while driving a motor vehicle—whether on the phone or not.The basic
lessons are ones we all learned as teenagers. Driving requires alertness, caution
and courtesy. It requires a heavy dose of basic common sense—keep your head up,
keep your eyes on the road, check your mirrors frequently and watch out for other
drivers. It requires obeying all traffic signs and signals and staying within the speed
limit. It means using seatbelts and requiring other passengers to do the same. But
with wireless phone use, driving safely means a little more. This brochure is a call
to wireless phone users everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying
our lives, protecting us in emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety is your most important call.
87
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 88 Tuesday, January 25, 2005 10:05 AM
A p p e n d i x
A
M e s s a g e f r o m t h e C T I A C e l l u l a r
I n t e r n e t A s s o c i a t i o n t o a l l
T e l e c o m m u n i c a t i o n s
&
Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1. Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable
features most phones offer, including automatic redial and memory. Also, work
to memorize the phone keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands-free device. A number of hands-free wireless phone
accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time,
if possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and
ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility
is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a "to do" list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get
caught in a dangerous situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while
driving, follow this simple tip—dial only a few numbers, check the road and
your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Stressful oremotional conversations and driving do not mix—they are distracting
and even dangerous when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary, suspend conversations
which have the potential to divert your attention from the road.
88
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 89 Tuesday, January 25, 2005 10:05 AM
A p p e n d i x
A
M e s s a g e f r o m t h e C T I A C e l l u l a r
I n t e r n e t A s s o c i a t i o n t o a l l
T e l e c o m m u n i c a t i o n s
&
8. Use your wireless phone to call for help. Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous
situations—with your phone at your side, help is only three numbers away.
Dial 9-1-1 or other local emergency number in the case of fire, traffic
accident, road hazard or medical emergency. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your community.
If you see an auto accident, crime in progress or other serious emergency
where lives are in danger, call 9-1-1 or other local emergency number, as you
would want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services.
But you still can use your wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to
inform wireless phone users of their responsibilities as safe drivers and good citizens.
As we approach a new century, more and more of us will take advantage of the
benefits of wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.The wireless industry reminds you to use your phone
safely when driving.For more information, please call 1-888-901-SAFE. For updates:
89
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 90 Tuesday, January 25, 2005 10:05 AM
Nokia One-Year Limited Warranty
Nokia warrants that the Nokia wireless phone and enhancements are
free from defects in material and workmanship. The warranty period for
the Phone (Radio) units and all enhancements (excluding carry cases) is
twelve (12) months from the date of purchase OR fourteen (14) months
from date of wholesale shipment from Nokia, OR fifteen (15) months
from the date of manufacture by Nokia. The warranty period for the Carry
cases is three (3) months from the date of purchase or five (5) months
from the date of wholesale shipment from Nokia.
During the warranty period, Nokia will, at its option, repair or replace the
defective product free of charge. Replacement Product may be either
new or remanufactured or refurbished.
However, if Nokia determines that the warranty conditions cannot be
applied, the purchaser will be billed for the repair and shipping.
EXCEPTIONS
This warranty is subject to the following exceptions:
1 Mobile or fixed installation, which is not in accordance with the
installation instructions, published by Nokia, will void the warranty.
Damage caused by a repair or an attempt to repair by other than a
service centre authorized by Nokia will void the warranty;
2 This warranty covers normal consumer use and does not cover defects
or damage to any product which, in the sole opinion of Nokia, has been
subject to: improper storage, exposure to moisture or dampness,
exposure to fire, sand, dirt, windstorm, lightning, or earthquake; to
theft, battery leakage, unauthorized modification, misuse, neglect,
abuse, misapplication, accident, alteration, improper installation,
maladjustmentofconsumercontrols, or abnormal operating conditions,
or which has been attributable to acts of God;
3 Fuses are not covered by the warranty;
4 This warranty does not cover defects or damages caused by a product
which is not approved by Nokia to be connected to its wireless phone;
5 This warranty does not cover defects or damages caused by improper
or defective function of the carrier system or by inadequate signal
reception by the antenna;
90
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 91 Tuesday, January 25, 2005 10:05 AM
6 Removal and reinstallation costs are not covered by this warranty;
7 This warranty is applicable only to products bought through Nokia
Products Ltd. in Ajax, Ontario, Canada, and sold either in Canada
or Bermuda.
8 Removal, alteration, or defacing of the Serial Number Plate, or the
enhancement Date Code Labels will void the warranty.
In no event shall Nokia be liable for incidental, special, or consequential
damages, direct or indirect, loss of anticipated benefits or profits, loss of
use of its wireless telephone, resulting from the use of its wireless phone, or
its enhancements, or arising from any breach of this warranty.
CLAIM PROCEDURE
In order to obtain warranty performance, return the defective unit to the
Nokia Service Centre with transportation charges prepaid (Shipping of the
repaired unit may be paid by Nokia, in which case Nokia shall have risk
of loss or damage during this shipment).
The proof of date of purchase will be required before in-warranty service
is rendered.
Maintenance and service may be obtained in any authorized service
centre in Canada.
EXTENSION OF WARRANTY PERIOD
When a repair is made, an extra 90-day service warranty is given to the
labour and parts of the repair concerned. If replacement of a faulty unit
is applied, instead of repairing, this 90-day service warranty is applied to
the replaced unit.
Besides this 90-day service warranty, the warranty repairs or replacements
do not affect the original warranty conditions, which are determined by
the date of purchase.
THE FOREGOING WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE
REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.
Some provinces do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
91
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 92 Tuesday, January 25, 2005 10:05 AM
FOR WARRANTY SERVICE LOCATIONS, CONTACT YOUR SERVICE PROVIDER/
RETAILER/DEALER OR DIRECTLY TO:
NOKIA PRODUCTS LIMITED
601 Westney Road South
Ajax, Ontario L1S 4N7
Tel: 905-427-1373
1-888-226-6542
Website: www.nokia.ca
For products being returned to Nokia or its authorized service centres, the
service provider/retailer/dealer shall prepay shipping charges, taxes, duties,
insurance. Nokia shall have no risk for loss or damage during this shipment.
NOTE: As warranty is automatically registered, no further action is
required by the consumer.
92
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 93 Tuesday, January 25, 2005 10:05 AM
certification information (SAR) 88
charge battery 81
charger 65
Index
connecting 18
contacts
add 41
battery
A
accessories
delete 46
edit 44
list 41
search 41
send 49
view 46
charging times 82
alarm clock 70
antenna 16
anykey answer 55
automate voice mail 32
automatic
countdown timer 76
currency converter 75
customer care 10
auto-update 62
redial 55
automatic update of service 55
D
B
dialing codes 44
back cover
display language 57
display settings 59
removing 17
replacing 17
battery
E
authentication 82
charging 18
charging and discharging 81
removing 17
emergency calls 87
while using wireless Internet 37
with keypad locked 58
enhancement settings 63
charger 65
replacing 17, 20
business cards 49
handsfree 63
headset 63
loopset 63
TTY/TDD 64
C
calculator 75
calendar 71
enhancements 80
ESN 9
exchange rate 75
Extra Virgin 36
sign on 36
call
forwarding 67
history 38
caller groups 42
calling cards 56
calls
F
answering 21
in-call options 22
making 20
FCC/IC information 88
feature codes 68
care and maintenance 84
93
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 94 Tuesday, January 25, 2005 10:05 AM
G
Q
games 79
quick keys 12
H
R
handsfree 63
headset 18, 63
hearing aids 63
help 9
restore factory settings 69
restrict calls 67
S
help text 15, 59
safety 6, 85, 91
screen saver 60
scrolling 14
security settings 65
set
I
indicators and icons 12
clock 61
date 61
time 61
K
Keyguard 22
automatic 58
Settings 52
shortcuts 15
speed dialing 43
start screen 12
stopwatch 77
L
languages 57
lock code 66
loudspeaker 21
T
M
technical information 90
text entry 24
memo 74
message folders 33
messages
predictive text 25
standard mode 24
text messages 28
time and date settings 61
timed profiles 53
tone settings 62, 68
Tools 70
delete 34
text 28
voice 31
My banner 60
My stuff 50
tools 70
touch tones 58
TTY/TDD 64
P
patent information 90
phone details 62
phone settings 57
predictive text 25
profiles 52
turn phone
off 18
on 18
timed 53
94
6015i.CNFRv1_Chariot_VMC_JWS_9237202.fm Page 95 Tuesday, January 25, 2005 10:05 AM
volume
V
adjusting 21
loudspeaker 21
view
call times 39
incoming calls 38
minibrowser duration 39
missed calls 39
outgoing calls 38
own phone number 68
saved messages 33
W
wallpaper 59
warranty 9, 94
welcome note 59
wireless Internet
disconnect 37
voice 53
make an emergency call 37
dialing 47
memo 74
X
voice messages 31
voicemail 32
Xpress-on covers 19
95
|