Nokia 5160 User Manual

OWNERS  
MANUAL  
Keys  
Fixed-length  
antenna  
Power key  
See p. 6.  
See p. 14.  
Do not  
attempt to  
extend or  
remove!  
Earpiece  
See p. 15.  
Current  
function of  
Navi™ key  
Screen  
Menu  
Navi™ key  
See p. 6.  
Scroll keys  
See p. 6.  
Clear key  
See p. 7.  
Voice mail key  
See p. 24.  
Number keys  
See p. 11.  
Emergency 9 key  
See p. 26.  
Indicators and icons  
You have an active call.  
You have one or more new voice messages.  
You have one or more new text messages.  
Keyguard is on. Your phone will not accept any  
keypresses. To turn it off, press Unlock, then  
.
The alarm clock is set.  
The ringing option is set to Silent.  
Digital service is available.  
The phone is ready for you to enter a response.  
Characters entered will be upper-case letters.  
Press the  
key to switch letter case.  
Characters entered will be lower-case letters.  
Press the key to switch letter case.  
Characters entered will be numbers. (When entering  
letters, switch to numbers by pressing and holding  
the  
key.)  
You are in “special character” mode; select a  
character, then press Use. (When entering letters,  
switch to special characters by pressing the  
key.)  
Contents  
i
Adding feature activation codes  
Adding feature cancellation codes  
to the menu . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Choosing your phone number  
(NAM selection). . . . . . . . . . . . . . . . . . . . . . . . . .31  
ii  
iii  
1. For your safety  
Read these simple guidelines before using your phone.  
Failure to comply with these guidelines may be dangerous  
or illegal.  
Road Safety Comes First  
Don’t use a hand-held phone while driving; park the  
vehicle first.  
Switch Off In Hospitals  
Follow any regulations or rules. Switch phone off near  
medical equipment.  
Switch Off On Aircraft  
Wireless phones can cause interference. Using them on  
aircraft is illegal.  
Switch Off When Refueling  
Don’t use phone at a refueling point. Don’t use near fuel or  
chemicals.  
Switch Off Near Blasting  
Do not use the phone where blasting is in progress.  
Observe restrictions, and follow any regulations or rules.  
Interference  
All wireless phones may get interference which could  
affect performance.  
Use Sensibly  
Use only in the normal position (to ear). Don’t touch the  
antenna unnecessarily.  
Qualified Service  
Only qualified service personnel must install or repair  
equipment.  
Accessories and Batteries  
Use only approved accessories and batteries. Do not  
connect incompatible products.  
1
   
FCC/Industry Canada Notice  
Your phone may cause TV or radio interference (for example,  
when using a telephone in close proximity to receiving  
equipment). The FCC or Industry Canada can require you to  
stop using your telephone if such interference cannot be  
eliminated. If you require assistance, contact your local  
service facility.  
This device complies with part 15 of the FCC rules.  
Operation is subject to the condition that this device does  
not cause harmful interference.  
Using this Guide  
The wireless phone described in this guide is approved for  
use in TDMA and AMPS networks.  
Network services  
A number of features included in this guide are called  
network services. They are special services provided by  
wireless service providers. Before you can take advantage  
of any of these network services, you must subscribe to the  
service(s) from your home service provider and obtain  
instructions for their use.  
Updates  
The latest version of this Owner’s Manual may be found on  
Nokia’s World Wide Web site at www.nokia.com.  
Interactive manual  
Now, Nokia has a great new way for you to learn how to use  
all of your phone features. Go to www.nokiahowto.com to  
access the Nokia Interactive Owner's Manual. It provides an  
interactive way to get step-by-step instructions for any of  
your phone's features.  
2
   
2. Battery installation and charging  
Before you can use your new phone, you need to attach and  
charge the battery.  
Attaching the battery  
To attach the battery, place it  
on the back of the phone as  
shown and slide it toward the  
top of the phone until it clicks  
into place.  
Battery charging  
Your phone is powered by a rechargeable NiMH or Li-Ion  
battery. Note that a new NiMH battery’s full performance  
is achieved only after two or three complete charge and  
discharge cycles. For charging times, see ‘Charging times’ on  
How to charge your battery  
Connect the lead from the charger to the bottom of your  
phone or to a charging stand. Then plug the charger into a  
standard wall outlet.  
When the battery is charging, the battery strength indicator  
on the right side of the display scrolls.  
Note: When you charge the battery for the first time, the  
battery strength indicator will not scroll the entire time; this  
is normal.  
Problems charging  
If your phone displays Not charging, charging is suspended.  
Check that the battery is connected to an approved charging  
device. If the battery is very hot or cold, wait for a while;  
3
         
charging will automatically resume after the battery is  
restored to its normal operating state. If charging still fails,  
contact your dealer.  
When is charging complete?  
When the charge indicators stop scrolling, your  
phone is considered fully charged. However, a  
slight increase in charge may occur if you leave  
your phone connected to the charger.  
When is a good time to charge?  
You can charge anytime, but remember that when your  
phone displays Battery low, you only have a couple of  
minutes of talk time left.  
Can I make calls while charging?  
Yes, but depending on the charger used, your battery may  
not charge during a call.  
Discharging NiMH batteries  
For good operation times, discharge NiMH batteries from  
time to time by leaving your phone switched on until it  
turns itself off (or by using the battery discharge facility of  
any approved accessory available for your phone). Do not  
attempt to discharge the battery by any other means.  
Removing the battery  
Note: Switch off the phone before removing the battery!  
1
2
3
Press and hold the  
button at the top of the  
battery.  
Slide the battery  
toward the bottom of  
the phone.  
Lift the battery off the  
phone.  
4
     
Important battery information  
Note that a new battery’s full performance is achieved only after  
two or three complete charge and discharge cycles!  
The battery can be charged and discharged hundreds of times  
but it will eventually wear out. When the operating time (talk  
time and standby time) is noticeably shorter than normal, it is  
time to buy a new battery.  
Use only batteries approved by the phone manufacturer and  
recharge your battery only with the chargers approved by the  
manufacturer.  
When a charger is not in use, disconnect it from the power  
source. Do not leave the battery connected to a charger for  
longer than a week, since overcharging may shorten its life. If  
left unused a fully charged battery will discharge itself over time.  
(NiMH batteries only) For good operation times, discharge the  
battery from time to time by leaving your phone switched on  
until it turns itself off (or by using the battery discharge facility  
of any approved accessory available for your phone). Do not  
attempt to discharge the battery by any other means.  
Temperature extremes will affect the ability of your battery to  
charge: allow it to cool down or warm up first.  
Use the battery only for its intended purpose.  
Never use any charger or battery which is damaged or worn out.  
Do not short circuit the battery. Accidental short circuiting can  
occur when a metallic object (coin, clip, or pen) causes direct  
connection of the + and - terminals of the battery (metal strips  
on the back of the battery), for example when you carry a spare  
battery in your pocket or purse. Short circuiting the terminals  
may damage the battery or the connecting object.  
Leaving the battery in hot or cold places, such as in a closed car  
in summer or winter conditions, will reduce the capacity and  
lifetime of the battery. Always try to keep the battery between  
59º F and 77º F (15º C and 25º C). A phone with a hot or cold  
battery may temporarily not work, even when the battery is fully  
charged. NiMH batteries’ performance is particularly limited in  
temperatures below 14º F (-10º C). Li-Ion batteries’ performance  
is particularly limited in temperatures below 32º F (0º C).  
Do not dispose of batteries in a fire!  
Dispose of used batteries in accordance with any local  
regulations.  
5
 
3. About the phone, keys and  
menu  
Power key  
You can use the power key  
to:  
turn the phone on or off (press and hold)  
turn the phone’s lights on for 15 seconds  
select a quick alert setting (see page 23) (if Keyguard is  
off and the phone is not connected to a headset or  
handsfree car kit)  
silence the ringing of an incoming call  
Nokia Navi™ key  
Your phone’s Navi™ key  
appears  
below the display. Its current function  
is indicated by the word that appears  
above it (for example, Menu). Simply  
press the Navi™ key to perform the  
function.  
Throughout this guide, when you see “press Menu,” “press  
Listen,” etc., press the Navi™ key when that word appears  
above it.  
Scroll keys  
The scroll keys  
are located to the right of the  
Navi™ key. Use the scroll keys to:  
browse menus  
move the cursor (see page 11) to the right or the left  
adjust the earpiece volume while in a call  
access your phone book (press  
access the dialed calls list (press  
screen)  
from the start screen)  
from the start  
6
             
Clear key  
Use the clear key  
to:  
delete a character to the left of the cursor  
clear all characters from the display (press and hold)  
return to the previous menu level  
return from the menu to the start screen (press and hold)  
access the in-call menu while in a call  
Lights  
To turn your phone’s lights on for 15 seconds:  
if Keyguard is off, press any key  
if Keyguard is on, you must press the  
key briefly  
(this conserves battery power by keeping the lights from  
turning on when the phone is in a pocket or purse)  
For information about controlling your phone’s lights when  
the phone is in a car kit, see page 21.  
External antenna jack  
At the back of the phone, below the antenna, there is a  
connector for an external antenna. The connector may be  
protected by a rubber cap. Remove the cap before  
connecting an external antenna. After removing the  
antenna, replace the cap.  
Note: Keep the cap out of the reach of small children.  
Start screen  
The start screen appears when you first  
turn on your phone. Menu appears  
above the Navi™ key so you can access  
your phone’s menu. Several features  
can be used only when the phone is at  
the start screen.  
7
               
To get to the start screen, press and hold  
for a second.  
(If there are characters on the display this clears the  
characters, then you must press and hold  
again.)  
Menu  
Your phone’s menu allows you to easily access the many  
powerful features in your phone.  
Scroll bar  
When you use your phone’s menu, a scroll bar  
appears at the far right of the screen. This bar  
indicates where you are in the menu; each tab  
location on the bar represents a different menu  
item.  
For example, press Menu once. The scroll bar appears with  
the first (top) tab displayed. A different tab appears each  
time you press one of the scroll keys  
.
Help text  
Many menu items have brief help text. To view the help text,  
scroll to the menu item and wait for about 10 seconds for  
the text to appear. Press More or  
to see the next page  
of text,  
to see the previous page, or to return to  
the menu.  
8
     
Menu shortcuts  
When you select a menu item, numbers appear on  
the display above the scroll bar. If you become  
familiar with these numbers, you can use them as  
shortcuts for accessing different menu items. For  
example, to access the Phone settings menu, you  
can simply press Menu 4 2. The phone displays the first item  
in that menu, Touch tones.  
Note: (1) Menu items in your phone vary depending on the  
network and accessories used. (2) This is not a complete list;  
see entries about individual features for more information.  
1 Phone book  
11 Search  
12 Add new  
13 Edit  
3 Call log  
31 Missed calls  
32 Received calls  
33 Dialed calls  
34 Clear call lists  
14 Erase  
141 One by one  
142 Erase all  
341 All  
342 Missed  
343 Received  
344 Dialed  
15 Options  
151 Scrolling view  
152 Memory status  
35 Call timers  
351 Last call  
352 All calls  
16 1-touch dialing  
353 Life timer  
354 Clear timers  
2 Messages  
21 Text messages  
211 Inbox  
212 Saved  
215 Erase all  
22 Voice messages  
221 Listen to voice  
messages  
222 Voice mailbox number  
23 Welcome note  
9
 
4 Settings  
8 My tones  
41 Call settings  
81 Ringing options  
411 Emergency key 9  
811 Ring  
412 Automatic redial  
812 Ascending  
813 Ring once  
814 Beep once  
815 Silent  
413 Calling card  
414 Automatic answerh  
42 Phone settings  
82 Ringing tone  
421 Touch tones  
422 Language  
83 Ringing volume  
423 Restore factory settings  
831 Level 1  
832 Level 2  
833 Level 3  
834 Level 4  
835 Level 5  
424 Lightsc  
43 Security settings  
431 Restrict calls  
432 Access codes  
44 Network services  
84 Message alert tone  
441 Voice privacy  
841 No tone  
842 Standard  
843 Special  
844 Beep once  
845 Long & loud  
442 Network feature setting  
443 Call forwardingm  
444 Call waitingm  
445 Send own numberm  
45 NAM selection  
85 Keypad tones  
851 Off  
5 System  
852 Level 1  
853 Level 2  
854 Level 3  
51 Automatic  
52 Manual  
86 Warning and game  
53 New search  
tones  
861 On  
862 Off  
87 Vibrating alertv  
6 Games  
61 Memory  
62 Snake  
63 Logic  
871 On  
872 Off  
9 Keyguard  
7 Clock  
71 Alarm clock  
72 Clock settings  
721 Display/Hide clock  
722 Adjust time  
723 Time format  
c
Visible only when used with car kit  
Visible only when used with headset or car kit  
Must be added to the menu manually; see ‘Network feature setting’ on page 27  
Visible only when vibrating battery is attached  
h
m
v
10  
Entering letters and numbers  
Cursor  
The cursor is a blinking vertical line that appears on the  
screen when you are entering text or numbers. Characters  
you enter appear to the right of the cursor. Pressing the  
key deletes the character to the left of the cursor. Use the  
scroll keys to move the cursor to the right  
or left  
.
ABC mode  
When your phone is ready for you to enter text, such as a  
name or message, it switches to ABC mode. The  
shows that it is in ABC mode.  
icon  
When  
is displayed, you can enter these characters by  
pressing the indicated key repeatedly:  
Key  
1
Characters  
. , ‘ ? ! - 1  
ABC2  
Key  
7
Characters  
PQRS7  
2
8
TUV8  
3
DEF3  
9
WXYZ9  
space, 0  
4
GHI4  
0
5
JKL5  
6
MNO6  
Changes letter case,  
switches between  
letters and numbers  
Changing letter case  
Press the  
letters. The  
key to switch between upper- and lower-case  
icon switches to to indicate that you  
are using lower case.  
Entering numbers  
To enter numbers while in ABC mode, you can:  
press and hold the corresponding key until the number  
appears, or  
switch between ABC mode and number mode by  
pressing and holding the  
key.  
11  
         
Special characters in names  
In ABC mode you can press the  
key to view the special  
characters below. You can use these characters when saving  
names in your phone book. Simply press  
or  
to  
highlight the one you want, then press Use.  
. , ? ! : ; - + # * ( ) ‘ “ _ @ & $ % / < > ¿ ¡ =  
Tip: To choose a character that appears near the end  
of the list, immediately press  
the list.  
to go to the end of  
Special characters in phone numbers  
You can use special characters to dial or save phone  
numbers of automated services such as bank account  
information. When entering numbers, press the  
repeatedly until you see the character you want.  
key  
Character  
*
Use  
This character is used to request services  
from the network. Contact your service  
provider for details.  
+
p
This character is not currently used.  
This character creates a pause. Digits to the  
right of the p are sent as touch tones after a  
2.5-second pause.  
Use this character to save phone numbers of  
automated services that require you to enter  
a password or other information after the  
call is answered. For example, if your voice  
mail number at work is 555-1212 and you  
need to enter your extension (1234) and then  
a password (5678) in order to listen to your  
messages, you could save this phone number  
as 5551212p1234p5678.  
w
This character creates a wait. It works  
similarly to the pause character except that  
digits to the right of the w are not sent until  
you press Send.  
12  
       
Keyguard (locking the keypad)  
The Keyguard feature allows you to  
“lock” your phone’s keypad so that  
accidental keypresses have no effect.  
This is handy when your phone is in a  
pocket or purse.  
Note: Keyguard is not a security feature and will not prevent  
unauthorized use of your phone.  
To lock the keys  
Press Menu 9 or Menu  
.
To unlock the keys  
Press Unlock  
.
Notes about Keyguard  
When Keyguard is on, the only way to answer a call is to  
press Answer.  
When Keyguard is on, calls may be possible to the  
emergency number programmed into your phone  
(e.g. 911 or other official emergency number). However,  
one-touch emergency dialing (‘emergency key 9’) does  
not operate.  
Keyguard is automatically turned off when the phone is  
connected to a car kit.  
13  
   
4. Basic functions  
Turning the phone on or off  
Press and hold the  
key for one second.  
Note: If the phone asks for a lock code, see ‘Lock code’ on  
page 51. If the phone asks for a security code, see ‘Security  
WARNING! Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
About the antenna  
Your Nokia phone has a fixed-length antenna. Do not  
attempt to extend or remove it.  
Normal position  
Hold the phone as you would any other telephone, with the  
antenna pointed up and over your shoulder.  
Tips on efficient operation  
As with any other radio transmitting device, do not touch  
the antenna unnecessarily when the phone is switched on.  
Contact with the antenna affects call quality and may cause  
the phone to operate at a higher power level than otherwise  
needed.  
Checking signal strength  
Your phone operates on radio waves. Radio signal coverage  
is maintained by a wireless network, and the quality of calls  
on your phone depends on the strength of the wireless radio  
signal.  
14  
             
Get a strong signal  
When you are at the start screen (see page 7) or in  
a call, the strength of the radio signal is indicated  
by the signal indicators on the left side of your  
phone’s display. These indicators scroll as the  
signal strength increases and decreases.  
To improve your phone’s reception, try moving your phone  
slightly. If you’re inside a building, move toward a window.  
Making a call  
1
Enter the area code and phone  
number. (Menu changes to Call.)  
2
Press Call and wait for the other  
party to answer.  
Volume adjustment (earpiece)  
To adjust the earpiece volume, press  
or  
during a  
call. If an accessory with its own loudspeaker is connected  
to your phone, the scroll keys will adjust the volume for that  
accessory.  
Muting the microphone  
When you are in a call, you can mute the phone’s microphone  
by pressing  
, pressing Options, and selecting Mute. To  
unmute the microphone, press  
, press Options, and  
select Unmute.  
Note: For more information about the in-call menu,  
Ending a call  
Press End.  
15  
             
Last number redial  
The last 10 numbers you dialed are stored in the dialed calls  
list. Use this list to redial a number you have called recently.  
1
From the start screen, press  
calls list.  
to access the dialed  
2
3
Scroll to the desired number.  
Press Call.  
Saving a name and number  
Finding a name and number  
1
Press  
to access your phone book.  
2
Scroll to the number you want. (To skip ahead quickly in  
the list, press the number key that corresponds to the  
first letter of the name.)  
3
Press Call.  
For other ways to find names and numbers, see ‘Finding  
Answering a call  
When someone calls, the phone will alert you (see ‘Tones’ on  
page 21) and Call will flash on the display. To answer the  
call, press any key except  
.
Note: To prevent accidental answering when the phone is in  
a pocket or purse, the phone will not answer the call if you  
press the key for longer than one second.  
For information on setting your phone to answer incoming  
calls automatically, see ‘Automatic answer’ on page 34.  
16  
               
Caller ID  
Caller ID is a network service that can display the name and  
phone number of the person calling you, if the information  
is available. Contact your service provider for details.  
If the caller can be identified, the  
phone may display the caller's name  
and phone number. The information  
displayed depends on the information  
available through the network and  
your phone book. It is possible that only the name or the  
number will appear.  
Call - caller ID unavailable will display when the wireless  
network does not recognize the calling number. Also, Call -  
caller ID blocked may display if the calling party has  
blocked caller ID.  
Silencing an incoming call  
To silence the ringing of an incoming call, press  
briefly.  
17  
     
5. Settings  
This section describes some phone settings that allow you to  
customize your phone to suit your preferences and that you  
probably won’t change very often.  
Automatic redial  
Use Menu 4 1 2 to turn this feature on or off. When this  
feature is on and the wireless network is busy, your phone  
will redial a number up to three times. This feature will not  
redial to a busy phone number.  
To stop the call attempts, press Quit or  
.
Calling card set-up  
If you wish to use a calling card for  
long distance calls, you must first save  
your calling card information into your  
phone. Your phone can save  
information about two calling cards.  
To learn how to make calling card calls, see ‘Calling card  
Saving calling card information  
1
2
3
4
5
Press Menu 4 1 3.  
Scroll to the desired calling card, then press Options.  
Scroll to Edit, then press OK.  
Enter your security code (see page 51), then press OK.  
At Dialing sequence, press Select. Press  
to choose  
the dialing sequence your card uses, then press Select.  
18  
         
Dialing  
sequence  
Use for cards that  
require you to:  
Cards using  
this sequence  
Access no. Dial 1-800 access number, MCI, AT&T True  
+ phone no. then phone number, then Choice, Sprint  
+ card no. card number (+ PIN if  
required)  
Canada, Unitel  
Access no. Dial 1-800 access number, networkMCI,  
+ card no. then card number (+ PIN if WorldPhone  
+ phone no. required), then phone  
number  
MCI  
Prefix  
Dial the prefix (any numbers GTE, PacBell,  
+ phone no. that must precede the  
+ card no. phone number) and phone  
number you want to dial,  
then card number (+ PIN if  
required)  
AT&T, Stentor  
Note: The order of the following steps may vary, depending  
on which dialing sequence your card uses.  
6
7
8
Enter access number (usually the 1-800 number listed  
on the back of the calling card), then press OK.  
Enter your card number and/or PIN, then press OK. Your  
phone will display Save changes? Press OK.  
Press  
to reach Card name, then press Select. Enter  
the card name using your phone’s keypad, then press OK.  
Note: This procedure might not work with all calling cards.  
Please look at the back of your calling card or contact your  
long distance company for more information.  
Choosing a calling card to use  
To select a calling card to use, press Menu 4 1 3, scroll to the  
card you want, then press Options. Select is highlighted;  
press OK. Enter your security code, then press OK.  
19  
Clock  
Your phone has an internal clock that  
can be displayed on the start screen.  
The clock must be set in order for call  
times to be recorded (see ‘Call log’ on  
If you remove the battery for longer than a couple of  
seconds, the time will be lost. The next time you turn on the  
phone, you will be asked to enter the time.  
Selecting time format  
Use Menu 7 2 3 to set the clock’s format to 24-hour or  
am/pm.  
Setting the time  
Use Menu 7 2 2 to enter the current time. Use two digits for  
both hours and minutes (for example, enter 1:30 as 0130).  
If the clock’s time format is set to am/pm, you will be asked  
to choose am or pm.  
Note: The  
key does not work on this screen. If you  
make a mistake, re-enter all four digits.  
Displaying or hiding the clock  
Press Menu 7 2 1 to display the clock on the phone’s screen  
if it is currently hidden, or vice versa.  
When the clock is displayed and the  
3:15 a.m.  
3:15 p.m.  
36=48  
36=48  
time format is set to am/pm, a black  
square will appear next to the time  
indicating a.m. or p.m.  
Language  
Use Menu 4 2 2 to set the language of  
your phone’s display. You can choose  
from English, French, Spanish, and  
Portuguese.  
The shortcut for choosing English is to  
press Menu 4 2 2 1.  
20  
             
Lights  
If you’re using your phone with a car kit, use Menu 4 2 4 to  
set your phone’s lights to On (lights stay on) or Automatic  
(after 15 seconds, lights turn off until the next key is  
pressed, phone rings, etc.).  
For information about turning your phone’s lights on at any  
Tones  
Use Menu 8, My tones, to change the six sound settings in  
your phone: ringing option, ringing tone, ringing volume,  
message alert tone, keypad tones, and warning and game  
tones.  
The quick alert settings feature (see page 23) allows you to  
select a fixed combination of these settings to suit your  
current environment.  
Ringing option  
Use Menu 8 1 to tell your phone how to notify you that you  
have a call.  
Note: If you choose Beep once or Silent, the alarm clock  
will only sound a quiet beep.  
Ring The phone rings normally using the currently selected  
ringing tone.  
Ascending The phone rings using the currently selected  
ringing tone. The ringing volume starts low and increases  
with successive rings.  
Ring once The phone rings once using the currently  
selected ringing tone.  
Beep once The phone beeps once.  
Silent The phone makes no sound when you receive a call.  
The  
icon appears at the start screen.  
21  
           
Ringing tone  
Your phone plays a ringing tone when someone calls you  
and the ringing option is set to Ring, Ascending, or Ring  
once. Use Menu 8 2 to choose one of 30 ringing tones.  
Scroll to a tone to hear how it sounds.  
Note: If the ringing option is set to Silent or Beep once, the  
phone won’t play sample tones.  
Ringing volume  
Use Menu 8 3 to control the volume of  
your phone’s ringing and of message  
alert tones.  
Note: If your phone does not ring  
loudly enough at maximum volume, try  
a different ringing tone; some tones are louder than others.  
Message alert tone  
Use Menu 8 4 to choose the tone played when you receive a  
text message. Scroll to a tone to hear how it sounds.  
Keypad tones  
Use Menu 8 5 to adjust the volume of the tones your phone  
makes when you press its keys.  
Warning and game tones  
Use Menu 8 6 to turn your phone’s warning and game tones  
on or off. Warning tones are created by events such as  
confirmations, errors, power on, battery low, and recharge  
battery.  
Vibrating alert  
If your phone has a vibrating battery attached, use Menu 8  
7 to set your phone to vibrate when you receive a voice call.  
If you turn vibrating alert on, your phone will vibrate even if  
its ringing option is set to Silent.  
22  
           
Note: The vibrating battery does not vibrate when your  
phone is connected to or placed in any charging device.  
Quick alert settings  
You can quickly adjust your phone’s  
sound settings when you go into a  
meeting, go outdoors, etc. To choose a  
quick alert setting, briefly press the  
key, scroll to the setting you want,  
then press OK.  
Tip: Instead of using the scroll keys, you can press  
the  
After you reach the setting you want, press and hold  
the key.  
key repeatedly to scroll through this menu.  
Note: If you choose Silent or Quiet, the alarm clock will  
only sound a quiet beep.  
My tones Uses the settings you have made in Menu 8,  
My tones.  
Silent All sound is turned off.  
Quiet Your phone beeps once when you receive a call or  
text message. Other tones are turned off.  
Loud Your phone rings loudly. Other tones are not affected.  
Headset Automatically selected when your phone is  
connected to a headset. Remembers any changes you make  
to settings in Menu 8, My tones, and uses them the next  
time you connect the phone to a headset.  
Car Automatically selected when your phone is connected  
to a car kit. Remembers any changes you make to settings in  
Menu 8, My tones, and uses them the next time you connect  
the phone to a car kit.  
Note: If the Silent, Quiet, or Loud quick alert setting is  
chosen and you change a setting in Menu 8, My tones, the  
phone switches the current quick alert setting to My tones.  
23  
   
Voice mailbox number  
If you have a voice mail subscription, use Menu 2 2 2 to  
save the voice mailbox number given to you by your service  
provider. This number may be up to 32 digits long. Once you  
save your voice mailbox number, you can press and hold the  
key to dial your voice mailbox. (You can also press  
briefly and then press Call.)  
For more information on voice mail, see ‘Voice messages’ on  
Voice privacy  
Available only in digital networks, voice privacy encrypts the  
voice channel so it is more difficult for anyone to eavesdrop  
on your conversations. Use Menu 4 4 1 to turn voice privacy  
on or off.  
This feature may not be available in all areas; contact your  
service provider for details. If voice privacy becomes  
inactive, the phone beeps and displays Voice privacy not  
active.  
Welcome note  
Use Menu 2 3 to create or change the  
welcome note for your phone. This  
note is displayed briefly each time you  
turn on your phone. It can be your  
name, a reminder, etc. To save the  
note, press Options, then Save. To erase the note, press  
Options, then Erase.  
24  
           
6. Emergency calls  
1
2
If the phone is not on, switch it on.  
Press and hold the  
key for several seconds to  
ready the phone for calls.  
3
4
Key in the emergency number for your present location  
(e.g. 911 or other official emergency number). Emergency  
numbers vary by location.  
Press Call.  
IMPORTANT!  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions which cannot guarantee connection  
in all conditions. Therefore you should never rely solely  
upon any wireless phone for essential communications  
(e.g. medical emergencies).  
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal  
strength. Emergency calls may not be possible on all wireless  
phone networks or when certain network services and/or  
phone features are in use. Check with local service providers.  
If certain features are in use (Keyguard, call restrictions, etc.),  
you may first need to turn those features off before you can  
make an emergency call. Consult this document and your  
local cellular service provider.  
When making an emergency call, remember to give all  
the necessary information as accurately as possible.  
Remember that your wireless phone may be the only means  
of communication at the scene of an accident - do not cut  
off the call until given permission to do so.  
25  
   
Emergency key 9  
Use Menu 4 1 1 to turn on this feature. When this feature is  
on, the phone attempts to make an emergency call when  
you:  
press and hold the 9 key, or  
press 9, then press Call.  
Note: When Keyguard is active, the only way to make an  
emergency call is to dial the emergency number, then press  
Call.  
IMPORTANT!  
Official emergency numbers (for example, 911) vary by  
location. Only one number is dialed automatically by  
Emergency Key 9, and it might not be the proper number  
in all circumstances.  
26  
   
7. Advanced functions  
Network feature setting  
Call forwarding, call waiting, and send own number are  
network services available through your service provider.  
These features do not appear in your phone’s Network  
services menu until you save the related feature code(s)  
given to you by your service provider. After you save the  
feature activation or cancellation code, the feature appears  
in the phone’s menu and you can use the menu to turn the  
feature on or off.  
Note: Feature codes can be saved only when your primary  
phone number (NAM 1) is selected. See page 31.  
Adding feature activation codes to the menu  
To save a feature activation code, press Menu 4 4 2. At the  
Feature code: prompt, enter the feature activation code,  
then press OK. Scroll to the feature that the code applies to,  
then press Select. (If the feature is call forwarding, choose  
one of the four types of call forwarding.) Finally, scroll to  
Activate, then press OK.  
Activate will now appear in the menu for that feature.  
Adding feature cancellation codes to the  
menu  
To save a feature cancellation code, press Menu 4 4 2. At  
the Feature code: prompt, enter the feature cancellation  
code, then press OK. Scroll to the feature that the code  
applies to, then press Select. (If the feature is call forwarding,  
choose one of the four types of call forwarding.) Finally,  
scroll to Cancel, then press OK.  
Cancel will now appear in the menu for that feature.  
27  
             
In-call menu  
When you are in a call, the function of the Navi™ key is  
End. However, your phone has an in-call menu that allows  
you to perform several functions while in a call. To use the  
in-call menu, press  
while you are in a call, then press  
Options. Press  
to scroll to the first item in the menu, or  
to scroll to the last item in the menu.  
The in-call menu is:  
Answer  
answer a waiting call  
Swap  
End  
switch between two calls  
end all calls  
New call  
Connect all  
Phone book  
Menu  
make a call when you have one in progress  
connect all active calls  
access the phone book  
access your phone’s menu  
send touch tones  
Touch tones  
Mute/End mute mute/unmute the phone’s microphone  
Making/receiving multiple calls  
Making a new outgoing call  
While you are in a call, select New call from the in-call  
menu. Enter the number (or press Search to locate the  
number in the phone book), then press Call. The first call is  
automatically put on hold while you are in your new call.  
Note: This feature might not be supported in your network.  
Contact your service provider for details.  
Three-way calling  
Note: This feature might not be supported in your network or  
might work differently than described. For more information,  
contact your service provider.  
To create a three-way call, call the first person. Then select  
New call from the in-call menu, enter or find the phone  
number of the second person, press OK and then press Call.  
The first person is put on hold. After the second person  
answers, choose Connect all from the in-call menu. Now all  
three of you can talk to each other at the same time.  
28  
           
Ending calls  
Press End or select End from the in-call menu.  
Note: The wireless network does not support ending  
individual calls when more than one call is in progress.  
Call waiting  
Call waiting is a network service that allows you to receive  
an incoming call when you’re already in a call. Contact your  
service provider for details.  
Answering a waiting call  
Note: Call waiting is a network service that requires a  
subscription from your service provider.  
If you are in a call with someone and another person calls  
you, the function of the Navi™ Key changes from End to  
Options. Press Options. The in-call menu appears with  
Answer selected. Press OK.  
Swapping between calls  
When you are in a call and you receive an indication of a  
waiting call, select Answer from the in-call menu. Your first  
call will be put on hold. To swap back to the first call, select  
Swap from the in-call menu.  
Cancelling call waiting: standard method  
To cancel call waiting before making a call, you must get  
the call waiting cancellation code from your service  
provider.  
1
Dial the code for cancelling call waiting followed by the  
phone number you want to call.  
2
Press Call.  
Example: If the code for cancelling call waiting is *810 and  
the number you want to call is (214) 555-1234, dial  
*8102145551234, then press Call.  
Cancelling call waiting: menu method  
You can save the code for cancelling call waiting given by  
your service provider and then use Menu 4 4 4 2 to cancel  
29  
       
Call forwarding  
Call forwarding is a network service that lets you forward  
your incoming calls to another phone number. Check with  
your service provider for details and feature codes.  
Activating call forwarding  
Standard method  
To activate call forwarding, you must get the call forwarding  
activation code from your service provider.  
1
Dial the code for activating call forwarding followed by the  
phone number to which you want to forward your calls.  
2
Press Call.  
Example: If the call forwarding activation code is *71 and  
the number you want to forward calls to is (214) 555-1234,  
dial *712145551234, then press Call.  
Menu method  
You can save the code for activating call forwarding and  
then use the menu to activate call forwarding. See ‘Adding  
Cancelling call forwarding  
Standard method  
To cancel call forwarding, you must get the call forwarding  
cancellation code from your service provider.  
1
Dial the code for cancelling call forwarding (for example,  
*710).  
2
Press Call.  
Menu method  
You can save the code for cancelling call forwarding and  
then use the menu to cancel call forwarding. See ‘Adding  
30  
       
1-touch dialing  
This feature allows you to make phone calls quickly and  
easily with the touch of a button. Once you have assigned a  
phone number to a number key (2 through 8), you can press  
and hold that key to dial the number. (You can also press the  
number key briefly and then press Call.)  
Note: Keys 1 and 9 are used exclusively for dialing your voice  
mailbox and for attempting emergency calls, respectively  
page 25).  
Assigning numbers to keys  
Before you can assign a phone number to a key, the phone  
number must be saved in your phone book (see page 16).  
Then follow the steps below.  
1
2
3
Press Menu 1 6.  
Scroll to the desired key, then press Assign.  
Press  
or  
to choose the name you want to assign  
to the selected key, then press Select.  
If a key already has a number assigned to it, you can press  
Options and then view, change, or erase the number  
assignment.  
Making calls using one-touch dialing  
Press and hold a number key (2 through 8) for a few seconds  
to call the number assigned to it. Your phone finds the  
phone number, displays it briefly, then dials it.  
You can also enter the number of the 1-touch dialing key  
(for example, 2) and press Call.  
Choosing your phone number  
(NAM selection)  
Your service provider can set up your phone to have two  
phone numbers that are activated in different service  
areas—for example, one number for the Dallas area and one  
number for the Chicago area.  
31  
         
A number assignment module, or NAM, consists of a phone  
number and network information that the service provider  
programs into your phone. When you select a NAM, you’re  
not only selecting a phone number, you’re also selecting a  
home system in which you will not be charged roaming fees.  
The two NAMs are not equal. Some features, such as  
system selection (see page 33) and network feature setting  
(see page 27), are available only when the primary NAM is  
selected.  
Use Menu 4 5 to select a NAM.  
Send own number  
This network service allows you to hide your phone number  
from a person you are calling who has Caller ID. (If for some  
reason your network prevents phone numbers from being  
displayed, you may be able to use this feature to show your  
number to the person you are calling.) Contact your service  
provider for feature codes for showing/hiding your phone  
number.  
Standard method  
1
Dial the feature code followed by the number you want  
to call.  
2
Press Call.  
Example: If the feature code to hide your number is *67 and  
the number you want to dial is (214) 555-1234, dial  
*672145551234, then press Call.  
Menu method  
You can save the feature code given by your service provider  
so that Send own number appears in your phone’s menu,  
and then use Menu 4 4 5 to use this feature. See ‘Network  
This feature must be activated before each call.  
Yes displays your number to the person you are calling.  
No prevents your number from being shown to the person  
you are calling.  
32  
   
Calling card calls  
Before you can make a call using a calling card, you have  
to enter your calling card information into the phone.  
To make a call using a calling card:  
1
Enter the phone number, including any prefix (such as 0  
or 1) that your calling card may require when you make  
a calling card call. See your calling card for instructions.  
2
3
4
Press and hold Call for a few seconds until your phone  
displays Card call.  
Your phone displays Wait for tone, then press OK.  
Wait for the tone, then press OK.  
Your phone displays Wait for tone, press OK again.  
Wait for the tone again, then press OK.  
System selection  
Your phone is capable of working in residential, private, and  
public systems. You can choose how your phone selects a  
network to use.  
This feature is Menu 5 in your phone. The default is Automatic,  
which means your phone automatically searches for networks  
available to you and chooses the appropriate one. Every time  
you switch on your phone, Automatic is selected.  
If you choose Manual, your phone displays a list of available  
and unavailable networks. (You can’t use unavailable  
networks.) Scroll through the choices and press OK when  
you reach the one you want.  
If you choose New Search, your phone begins a new search  
for new private and residential systems. When it finds the  
best new system, it displays it. You can then select it or start  
another search by pressing Next.  
Note: The Manual and New search features can be used  
only when your primary phone number (NAM1) is selected.  
33  
       
To switch from private to public  
If you are in a private system and want access to a public  
system, press and hold Menu when you are not in a call.  
Your phone will display Search public systems? Press OK  
and your phone will use the public system for the next  
outgoing call. After the call it will revert to Automatic  
system selection.  
Automatic answer  
This feature is available only when your phone is connected  
to a headset or to an approved handsfree car kit equipped  
with the ignition sense option, with the ignition on.  
When automatic answer is turned on, your phone answers  
incoming voice calls after one ring. Use Menu 4 1 4 to turn  
this feature on or off.  
Touch tones  
Your phone can generate various sounds, called touch tones,  
when the keys are pressed.  
Touch tones can be used for many automated services such  
as checking voice mail, movie times, and airline arrival/  
departure times.  
Note: Sending confidential information over the air using  
touch tones is not recommended.  
Setting manual touch tone length  
Use Menu 4 2 1 1 to set the length of touch tones created  
when you press a key:  
Continuous means the tone sounds for as long as you press  
and hold the key.  
Fixed sets the tone length to one tenth of a second,  
regardless of how long you press and hold the key.  
Off turns off touch tones. No tones will be sent when you  
press the keys.  
34  
         
Setting automatic touch tone length  
Use Menu 4 2 1 2 to set the length of touch tones sent  
automatically by the phone to Short (one tenth of a second)  
or Long (half a second).  
Saving touch tone strings  
Touch tone strings can be used for sending and receiving  
information with your phone. Save touch tone strings the  
same way you save phone numbers (see page 16).  
For example, you can save your office voice mailbox number  
along with your password for easy access to your messages.  
Sending touch tone strings  
1
During a call, press  
display.  
to clear any numbers from the  
2
3
4
Press Options.  
Scroll to Touch tones, then press OK.  
Enter or find the touch tone string, then press OK.  
Restore factory settings  
You can use Menu 4 2 3 to reset many of the settings in  
your phone to their factory defaults (as in a new phone).  
You will be required to enter the security code.  
Note: The phone book, language setting, call timers, security  
code, and lock code are not affected.  
35  
       
8. Phone book  
Your phone allows you to save 100 phone numbers and  
associated names so they are right at your fingertips for  
easy dialing.  
Saving names and numbers  
Saving a name and number is easy!  
Just enter the phone number,  
press  
or  
, then press Save.  
Enter a name if you wish, then press  
OK.  
Each name may consist of up to 16 characters and each  
phone number may consist of up to 32 characters.  
Saving a number quickly  
To save a number quickly, enter the phone number,  
press  
or  
, then press and hold Save. The number is  
saved to your phone book and you can add a name to it later  
Saving a name and number while in a call  
To save a name and number while in a call:  
1
2
3
4
5
6
Press  
.
Press Options.  
Scroll to Phone book, then press OK.  
Scroll to Add new, then press Select.  
Enter a name if you like, then press OK.  
Enter the phone number, then press OK.  
The entry is displayed in your phone list. Press Call to call  
the number or  
to clear the screen (the current call  
will not be affected).  
36  
       
Notes about saving names  
A name may appear only once in memory. If you try to  
save a name that already exists in memory, the phone  
asks if you want to replace the existing name.  
If you try to save a phone number and your phone book  
is full, you are given the option to replace an existing  
entry. Scroll to the entry you want to replace and press  
OK, or press  
to cancel.  
Finding names and numbers  
There are several ways to find names and numbers in your  
phone book.  
From the start screen  
Press  
to access your phone book, then scroll to the  
desired name/number.  
Tip: You can also press the number key that  
corresponds to the first letter of the name. The first  
matching entry is displayed at the top of the screen.  
Using the Phone book menu  
Press Menu 1 1, enter the first few  
letters of the name, then press OK.  
Your phone displays the first matching  
entry at the top of the screen.  
While performing other functions  
Say you want to forward your phone  
calls to a number that is saved in your  
phone book. When you are prompted  
to enter the phone number, you can  
find it instead—simply press Search to  
access your phone book.  
37  
   
Editing names and numbers  
To edit phone book entries, press Menu 1 3, scroll to the  
entry you want to edit, then press Edit. Edit the name and  
number as needed.  
Erasing names and numbers  
Use Menu 1 4 to erase entries from your phone book. One  
by one lets you select one entry at a time to be erased.  
Erase all erases your entire phone book (you will be required  
to enter your security code first).  
Scrolling view  
Use Menu 1 5 1 to choose a scrolling view for your phone  
book (Name list, Name+number, or Name only).  
Tip: If your phone book’s scrolling view is set to  
Name list or Name only, you can view the phone  
number associated with a name by pressing and  
holding the  
key.  
Checking available memory  
Use Menu 1 5 2 to see how many memory locations are free  
and how many are being used. (Each memory location holds  
one phone number and associated name.)  
38  
               
9. Call log  
For your convenience, the call log (Menu 3) saves a list of  
phone numbers you have dialed, and can show you how  
much time you have spent on the phone. If you subscribe to  
the caller ID network service, the call log also records the  
phone numbers of missed calls and received calls. Contact  
your service provider for details.  
The Options key  
When you access Missed calls, Received calls, or Dialed  
calls and press Options, a list of options appears on your  
phone’s display.  
Call dials the number.  
Call time shows the time of the last call. (Your phone’s  
clock must be set; see page 20.)  
Edit number allows you to edit the number.  
Save allows you to enter a name for the number, edit the  
number if needed, and save both to your phone book.  
Erase erases the number from the call list.  
View number displays the associated phone number if only  
the name is currently displayed.  
Missed calls  
If you subscribe to the caller ID network service, your phone  
automatically stores the last 10 numbers that have tried  
unsuccessfully to reach you (as long as the caller allowed  
his or her number to be shown to you).  
When the display says Missed calls  
Press List. If you have missed more than one call, you can  
scroll through the list of numbers. To dial the displayed  
number, press Options, then choose Call.  
39  
         
Viewing the missed calls list at any time  
Use Menu 3 1 to view the missed calls list at any time.  
To dial a number, press Options, then choose Call.  
Received calls  
If you subscribe to the caller ID network service, your phone  
automatically stores the phone numbers of the 10 most  
recent calls you’ve answered. Use Menu 3 2 to view the  
received calls list. To dial a number, press Options, then  
choose Call.  
Dialed calls  
Your phone automatically stores the last 10 numbers you’ve  
dialed. From the start screen, press  
to access the dialed  
calls list. Scroll to the desired number, then press Call.  
Note: To perform any of the options listed on page 39, access  
the dialed calls list by pressing Menu 3 3.  
Clearing call lists  
Use Menu 3 4 to clear the missed, received, and/or dialed  
call lists.  
Call timers  
Use Menu 3 5 to see the amount of  
time you’ve spent in calls. Times are for  
the currently selected phone number;  
your phone has a separate timer for  
each phone number, or NAM  
Note: The actual time invoiced for calls by your service  
provider may vary, depending upon network features,  
rounding-off for billing, and so forth.  
40  
               
Viewing call timers  
Use Menu 3 5 to view the various call timers.  
Last call is the duration of the last call, or current call if  
applicable.  
All calls is the duration of all calls since the timers were last  
reset.  
Life timer displays the duration of all calls for the life of  
your phone and cannot be reset.  
Setting timers back to 0  
Use Menu 3 5 4 to clear call timers. You will be required to  
enter your security code.  
Displaying the current call timer during calls  
1
2
3
4
Press Menu 3 5 1.  
Press Details.  
Press Select.  
Scroll to On, then press OK.  
During a call, the amount of time spent in that call will be  
displayed.  
41  
10. Voice messages  
Voice mail is a network service that allows callers to record  
a message when you cannot be reached. You can then call  
your voice mailbox and retrieve your messages.  
Saving your voice mailbox number  
When you subscribe to voice mail, your service provider will  
give you a voice mailbox number. You should save this  
number so you can call your voice mailbox by pressing and  
holding the  
Listening to new voice messages  
When you receive a voice message, your phone may notify  
you by beeping, displaying the voice message indicator  
, and displaying New voice message. The phone may  
display the number of messages if there is more than one.  
Note: The method of notification depends on your service  
provider.  
When your phone notifies you that you have a new voice  
message, press Listen. Your phone dials your voice mailbox  
number, if you have saved it.  
Calling your voice mailbox at any time  
Once you have saved your voice mailbox number, you can  
press and hold the  
key to dial your voice mailbox.  
42  
         
11. Text messages  
The text message network service allows you to receive text  
messages from a variety of sources, such as a Web page set  
up by your service provider. Contact your service provider for  
more information.  
Reading messages  
When you receive a text message, the phone displays the  
indicator, either Message received or New  
emergency message (if an emergency message has been  
received), and makes a sound (depending on the message  
alert tone; see page 22).  
To read the message, press Read. This takes you to the  
Inbox, with the new message selected. Press Read again.  
If necessary, use the scroll keys to read the entire message.  
After reaching the end of the message, use the scroll keys to  
view the sender’s name or phone number, and the date and  
time the message was received.  
Options when reading messages  
Several options are available while you’re reading a  
message. Just press Options, scroll to the one you want,  
then press OK.  
Read next allows you to read the next message.  
Erase deletes the message. Press OK to confirm the deletion  
(or  
to cancel).  
Save saves the message in the Saved folder.  
Call back calls any displayed phone number included in the  
message. If more than one number was included, a list of  
numbers is displayed. Choose one and press Call.  
When you’ve seen the last new message, the  
disappears.  
indicator  
43  
       
About the Inbox  
The Inbox holds text messages that have not been deleted or  
saved. Use Menu 2 11 to access the Inbox at any time.  
You will see a list of message headers. The  
of the header indicates that a message has been read.  
The icon indicates that a message has not been read.  
icon in front  
Scroll to the desired message, then press Read.  
About the Saved folder  
The Saved folder holds up to 30 saved text messages.  
Use Menu 2 1 2 to access the Saved folder and read  
saved messages.  
Storage of incoming messages  
When you have an incoming text message and your phone’s  
memory is full, one or more low-priority messages, which  
have been read, will automatically be deleted in order to  
receive the new text message. Messages are usually deleted  
from your Inbox, but an emergency message may cause  
messages to be deleted from the Saved folder.  
If the message memory is still full, your phone will display  
No space: message waiting. You can clear this notification  
by pressing OK. You should delete one or more old messages  
to make room for the new message. The network will re-send  
the message at a later time.  
Erasing all text messages  
Use Menu 2 1 5 to access the Erase all option for Text  
messages. Erase all allows you to permanently erase all  
messages from one of the following categories:  
All read  
Erases all read messages in the inbox  
All in inbox Erases all messages in the inbox  
All saved  
Erases all messages stored in the Saved folder  
All in outbox Erases all messages in the outbox (5160i only)  
44  
         
Text message features for the 5160i  
If you have the Nokia 5160i, you have the capability to  
write, send, forward and reply to text messages. Your phone  
must be a 5160i to perform these functions, and you must  
subscribe to the text messaging network service.  
Note: The availability of writing and sending text messages  
may vary according to your wireless service provider. Please  
contact your service provider for details.  
Writing and sending text messages  
The 5160i allows you to write a text message using your  
keypad. Once you have written a message on your screen,  
you will have options for sending your message.  
Writing a text message  
1
2
Press Menu 2 1 3 and select Write new  
Write your text message by entering letters and numbers  
from your keypad  
3
The function of the Navi™ key will change to Options  
Your Options menu is:  
Send  
Back  
send the message  
return to the Text messages menu  
Clear screen clear all entered text from the screen  
Settings  
Save  
choose a setting for your message  
store the text message to Saved  
Sending a text messages  
1
2
3
Write a text message and press Options  
To send the message, highlight Send and press OK  
Enter the phone number (or press Search to locate the  
number in the phone book), then press Send  
45  
     
Message settings  
This network feature allows you to mark your text message  
as urgent, place your number within the text message, or  
request a read receipt. This is a network feature. Contact  
your service provider for more information.  
Message settings are located in the Write new options  
menu as Settings. You may select or deselect the following  
settings by pressing Mark or Unmark.  
Urgent  
notify recipient that your message is  
important  
Read receipt notify you that the recipient has opened your  
message  
Callback no. place your phone number within the message  
Received Urgent messages are indicated with an  
exclamation mark (!) in front of the message.  
Note: Callback no. is the default setting for your phone.  
About the Outbox  
Use Menu 2 1 4 to access the Outbox. The Outbox stores  
messages that were sent successfully as well as messages  
that were sent unsuccessfully. The  
message heading shows that you have sent the message to  
the text message center. The icon shows that you  
icon in front of a  
attempted to send the message, but your attempt was  
unsuccessful.  
Press Read to read the selected message.  
Forwarding and replying to a message  
You can forward or reply to messages which are located in  
the Inbox, Saved folder or Outbox of your 5160i. Highlight  
the message and press Read. The Options menu appears.  
46  
     
Forwarding a text message  
1
2
3
4
Highlight the message that you want to forward  
Press Read, then press Options  
Scroll to Forward, press OK  
Send the message as you normally would  
Replying to a text message  
1
2
3
4
Highlight the message that you want to reply to  
Press Read, then press Options  
Scroll to Reply, press OK  
Send the message as you normally would  
47  
 
12. Extra features  
Alarm clock  
The alarm clock feature is based on  
your phone’s internal clock and sounds  
an alert at a time you specify.  
Setting the alarm clock  
Use Menu 7 1 to turn the alarm clock on or off.  
Note that when you’re entering the alarm time, use two  
digits for both hours and minutes (for example, enter 1:30  
as 0130). If the clock’s time format (see page 20) is set to  
am/pm, you will be asked to choose am or pm.  
Note: The  
key does not work on this screen. If you  
make a mistake, re-enter all four digits.  
Alarm volume  
The alarm volume is determined by the current ringing  
volume. However, if you have manually set the ringing option  
(see page 21) to Silent or Beep once or have selected the  
Silent or Quiet quick alert setting (see page 23), the phone  
only sounds a quiet beep.  
When the alarm sounds  
To shut off the alarm, press any key except Snooze.  
If you press Snooze, the alarm sounds again in 10  
minutes. To turn off the alarm before then, press Stop.  
If you let the alarm sound for one minute without  
pressing a key, it stops for 10 minutes, then starts again.  
If you turn off the phone  
If you turn off the phone and the alarm is set, the phone  
switches itself on at alarm time, then the alarm sounds.  
48  
     
To shut off the alarm, press any key except Snooze.  
The phone displays Keep the phone on? Press Yes to  
keep it on or  
to switch it off.  
If you press Snooze, the phone turns itself off for 10  
minutes, then the alarm sounds again.  
REMEMBER! Do not switch on the phone when wireless  
phone use is prohibited or when it may cause interference or  
danger.  
Games  
Use Menu 6 to challenge yourself or a friend to the three  
fun games in your phone. To pause a game, press  
.
To resume, choose Continue.  
REMEMBER! Your phone must be switched on to use this  
function. Do not switch on the phone when wireless phone  
use is prohibited or when it may cause interference or danger.  
Memory  
Reveal pictures to find pairs in as few tries as possible. Move  
the cursor with the 2 (up), 4 (left), 6 (right), and 8 (down)  
keys. Press the 5 key to reveal pictures. Once found, pairs  
stay visible. Press the  
revealed pictures or to move from the bottom right of the  
screen to the top left. Press the key to jump to the left  
key to jump to the right over  
over revealed pictures or to move from the top left of the  
screen to the bottom right.  
Snake  
Feed the snake with as many goodies as possible and watch  
it grow. Use keys 2, 4, 6, and 8 to turn the snake toward  
food. The longer the snake’s tail grows, the higher your  
score. If the snake hits its own tail or the surrounding wall,  
the game is over.  
49  
       
Logic  
Find the secret combination of figures in a column. Possible  
figures are shown at the top of the display. Press the 5 key  
repeatedly to select a figure and the 2, 4, and 8 keys to  
move the cursor. Once you think you have the right  
combination, press the  
key. The result appears as a set  
of marks above the column. A correct figure in the right  
place gets a full mark; a correct figure in the wrong place  
gets a half mark. The game ends when the correct figures  
are in the right place.  
Tip: To copy a figure from the previous column, move  
the cursor over it using the 2, 4, or 8 key, then press  
the 5 key.  
50  
 
13. Security features  
Access codes overview  
Access codes consist of the lock code and security code.  
When you get your phone, you should change these codes  
from their defaults, write down the new codes, and keep  
them in a safe place away from the phone. Avoid using  
access codes that are similar to emergency numbers, such as  
911, to prevent accidental dialing of the emergency number.  
Lock code  
Your phone’s lock code is used to lock and unlock your  
phone. The default lock code is 1234. Use Menu 4 3 2 3 to  
change the lock code.  
When the phone requires the lock code, it displays Enter  
lock code: Enter the code, then press OK.  
If you enter a wrong lock code five times in succession, your  
phone prompts you for the security code.  
Security code  
The security code is required to restrict calls and to restore  
factory settings. The default security code is 12345.  
Use Menu 4 3 2 4 to change the security code.  
When the phone requires the security code, it displays  
Security code: Enter the code, then press OK.  
If you enter an incorrect security code five times in  
succession, the phone will not accept any input for the next  
five minutes.  
Restricting calls  
Use Menu 4 3 1 to restrict outgoing or incoming calls.  
This is handy if you want to lend your phone to someone but  
don’t want them to make long-distance or other expensive  
calls.  
51  
                   
Restricting incoming calls  
Choose Restrict incoming calls to prevent your phone from  
receiving incoming calls. Enter your security code, then  
press OK. Press Mark, then press  
this change (or to cancel).  
. Press Yes to save  
Note: This feature requires the caller ID network service, and  
the caller’s ID must be available to the phone in order for the  
restriction to work.  
Allowing incoming calls  
To allow incoming calls once again, choose Restrict incoming  
calls and enter your security code. Press Unmark, then press  
. Press Yes to save this change (or  
to cancel).  
Restricting outgoing calls  
You can create a list of numbers to which outgoing calls  
cannot be made. A call restriction can consist of an entire  
phone number, an area code, etc. When the restriction is  
selected, calls cannot be made to any number beginning  
with those digits. For example, entering 2145551234 will  
block calls to (214) 555-1234 only. 1 will block all calls  
starting with 1, including long distance calls and 1-800  
calls. 1800 will block 1-800 calls only.  
Adding numbers to the restricted outgoing calls list  
To prevent your phone from making outgoing calls, choose  
Restrict outgoing calls. Enter your security code, then press  
OK. Continue with the steps illustrated below.  
1
2
Add restriction is selected.  
Press OK.  
Enter the phone number, area code,  
etc. to which you want to restrict  
calls, then press OK.  
52  
3
If you want, give a name of up to  
10 characters to the restriction  
(such as Joey, Long dist, or 1-800  
#s), then press OK.  
The entry is added to your list of  
restricted numbers.  
Allowing calls to a number on the list  
If you later decide to allow calls to a  
restricted number, press Select to see  
your list of numbers. Press Unmark to  
remove the restriction. (The number  
remains in the list so that you can  
restrict it again later by pressing Mark.) When you’re done,  
press  
. Press Yes to save your changes (or  
to  
cancel).  
Making changes to the restricted outgoing calls list  
To edit or completely erase an entry in the list, choose Edit  
or Erase, select the entry you want to edit or erase, and  
follow the instructions on the screen.  
Phone lock  
You can prevent unauthorized use of your phone by locking  
it. When your phone is locked, only incoming calls and calls  
to the unlocked phone number (see below) are allowed.  
The memory and menu are unavailable.  
Note: Calls may still be possible to emergency numbers.  
How to lock your phone  
Press Menu 4 3 2 1. Enter the lock code (see page 51), then  
press OK. Scroll to On, then press OK.  
How to unlock your phone  
Press Menu, enter the lock code, then press OK.  
53  
   
Answering a call when the phone is locked  
Press Answer.  
Saving the unlocked phone number  
Use Menu 4 3 2 2 to save a number that may be called even  
when your phone is locked. You will be required to enter the  
lock code.  
Calling the unlocked phone number  
Press  
or  
, or manually enter the number exactly as it  
is saved, then press Call.  
54  
14. Accessories  
An extensive range of accessories  
is available for your phone. You  
can select the accessories that best  
suit your specific communication  
needs. For availability, see your  
local authorized Nokia dealer.  
A few practical rules for accessory  
operation:  
Keep accessories out of small children's reach.  
When you disconnect the power cord of any accessory,  
grasp and pull the plug, not the cord.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Installation of complex car equipment must be  
completed by qualified personnel only.  
WARNING!  
Use only batteries, chargers and accessories approved by  
the phone manufacturer for use with this particular phone  
model. The use of any other types may invalidate any  
approval or warranty applying to the phone, and may be  
dangerous.  
Nokia Xpress-on™ color covers  
Your phone’s Xpress-on™ cover is available in several  
fashion colors. Extra covers may be purchased from your  
authorized Nokia dealer.  
Note: Always store the phone with cover attached.  
55  
       
Changing covers  
When changing covers, don’t use the phone’s antenna as  
leverage!  
1
Switch off the power and disconnect the phone from  
the charger or any other device.  
2
Using a coin, depress the  
colored tab on the top of  
the phone and slide the  
color cover forward.  
3
Remove the cover.  
4
Remove the rubber  
keypad from the back of  
the cover. Place it into  
the back of the new  
cover.  
56  
5
Place the bottom of the  
cover against the bottom  
of the phone. Make sure  
all three sets of plastic  
tabs line up with their  
respective slots, as shown  
at left. Close the cover and  
snap it shut all the way  
around the edge of the  
phone.  
Batteries  
Several batteries are available for your phone:  
BPS-1 Ultra Slim Li-Polymer 600 mAh  
BLS-2N Extended Li-Ion 900 mAh  
BMS-2S Extended NiMH 900 mAh  
BMS-2V Vibrating NiMH 900 mAh  
BLS-4 Ultra Extended Li-Ion 1500 mAh  
Charging times  
The table below displays approximate battery charging  
times. These charging times will charge your phone to  
about 80% of its capacity, and the battery strength  
indicator will stop scrolling. If you wish to obtain 100%  
battery capacity, please allow another two hours for  
“maintenance” charge.  
Standard  
Rapid Travel Rapid Mobile  
Travel  
Charger  
ACP-7U  
Battery  
Charger  
ACP-9U  
Charger  
LCH-8  
BPS-1 Ultra Slim  
Li-Polymer 600 mAh  
2 hours,  
30 minutes  
1 hour, 20 minutes  
BLS-2N Extended Li-Ion  
900 mAh  
2 hours  
BMS-2S Extended NiMH  
900 mAh  
4 hours  
1 hour, 30 minutes  
3 hours, 30 minutes  
BMS-2V Vibrating NiMH  
900 mAh  
BLS-4 Ultra Extended Li-Ion  
1500 mAh  
5 hours  
57  
     
Talk and standby times  
The table below displays approximate talk and standby times.  
Variations will occur depending on network settings and usage.  
Talk Time  
Standby Time  
Digital Analog  
66 - 20 -  
Battery  
Digital  
1 hr, 20 min -  
Analog  
BPS-1 Ultra Slim  
40 min -  
Li-Polymer 600 mAh  
2 hrs, 10 min 1 hr, 15 min  
133 hrs  
33 hrs  
BLS-2N Extended  
Li-Ion 900 mAh  
BMS-2S Extended  
NiMH 900 mAh  
2 hrs -  
1 hr -  
100 -  
200 hrs  
30 -  
50 hrs  
3 hrs, 15 min 1 hr, 45 min  
BMS-2V Vibrating  
NiMH 900 mAh  
BLS-4 Ultra Extended  
Li-Ion 1500 mAh  
1 hr, 30 min -  
3 - 5 hrs  
170 -  
50 -  
83 hrs  
2 hrs, 45 min 335 hrs  
Chargers and other accessories  
WARNING!  
This apparatus is intended for use when supplied with power  
from the Standard Travel Charger (ACP-7U), Rapid Travel  
Charger (ACP-9U), or Rapid Mobile Charger (LCH-8). Other  
usage will invalidate any approval given to this apparatus  
and may be dangerous.  
The following chargers and other accessories are available  
for your phone; please see your dealer for details. Also, refer  
to any accessory options manual that may have been  
included in your sales package for the entire line of Nokia  
Original Accessories.  
Note: When a charger is not in use, disconnect it from the power  
source. Do not leave the battery connected to a charger for  
longer than a week, since overcharging may shorten its life. If  
left unused, a fully charged battery will discharge itself over time.  
ACP-7U Standard Travel  
Charger  
Use this durable and economical  
charger to charge all battery  
options. Plug the charger into a wall  
outlet and connect the connector to  
the bottom of your phone.  
58  
   
Check the charging status on the phone display.  
Calls can be made during charging, but charging will stop  
for the duration of the call.  
Note: If the battery is completely empty, you cannot use the  
phone until it has enough charge to operate.  
The Standard Travel Charger is available for different voltage  
levels and can also be used with the DCH-9 Compact Desktop  
Charging Stand.  
ACP-9U Rapid Travel Charger  
The extremely light, functionally  
designed Rapid Travel Charger charges  
your phone battery quickly.  
Plug the charger into a wall outlet and  
connect the connector to the bottom of  
your phone. Check the charging status  
on the phone display. You can use your  
phone while charging.  
Operating within a voltage range of 100V-240V AC  
(50Hz-60Hz), the Rapid Travel Charger is practically voltage-  
independent in normal office and household use. Like the  
Standard Travel Charger, the Rapid Travel Charger is compatible  
with all battery options. The Rapid Travel Charger can also be  
used with the DCH-9 Compact Desktop Charging Stand.  
LCH-8 Rapid Mobile Charger  
The multivoltage Rapid Mobile  
Charger allows you to charge  
your phone when you travel.  
The small charger's functional  
design fits well with most car  
lighters and interiors.  
Charging times are the same as for the Rapid Travel Charger  
ACP-9U. Calls can be made during charging.  
A green light indicates that the Rapid Mobile Charger is  
ready to charge. Check the charging status on the phone  
59  
display. The input voltage is 12 or 24 V DC, negative  
grounding.  
The Rapid Mobile Charger can be used with all accessories  
available for your phone.  
Avoid prolonged charging with the Rapid Mobile Charger  
when the car engine is not running. This may cause the  
battery of your car to drain.  
Note: In some cars the cigarette lighter plug is not provided  
with power when the ignition is switched off. Verify that the  
green LED light is lit.  
DCH-9 Compact Desktop Charging Stand  
Compatible with all battery  
options, the Compact  
Desktop Charging Stand can  
be used with the Standard  
Travel Charger ACP-7U or  
the Rapid Travel Charger  
ACP-9U. The Compact  
Desktop Charging Stand  
provides mounting for both the phone and a spare battery.  
Plug the charger into a wall outlet and connect the  
connector to the back of the Compact Desktop Charging  
Stand. Place your phone and/or a spare battery in the stand  
to begin battery charging.  
When the phone is charging, no lights are displayed on the  
stand; check the charging status of the phone battery on  
the phone display.  
Charging moves to the rear slot once the front battery is  
100% charged.  
When the spare battery is charging, check the status  
indicator on the left side of the charging stand. A red light  
indicates that the battery is charging; a green light  
indicates that the battery is charged to at least 80% of its  
capacity.  
60  
DCH-9 Rear Slot Charging Times  
Using ACP-7U  
Using ACP-9U  
Battery  
Front slot Front slot Front slot Front slot  
empty  
occupied  
empty  
occupied  
BPS-1 Ultra Slim  
Li-Polymer 600 mAh  
4 hours,  
30 minutes 30 minutes  
6 hours,  
4 hours,  
30 minutes  
3 hours  
BLS-2N Extended  
Li-Ion 900 mAh  
BMS-2S Extended  
NiMH 900 mAh  
6 hours,  
8 hours,  
4 hours,  
5 hours,  
30 minutes 30 minutes 30 minutes 30 minutes  
BMS-2V Vibrating  
NiMH 900 mAh  
BLS-4 Ultra Extended  
Li-Ion 1500 mAh  
15 hours,  
45 minutes  
10 hours,  
30 minutes  
12 hours  
8 hours  
The phone has the built-in intelligence to maintain the  
battery, so there is no need for a discharge feature on the  
stand.  
61  
15. Reference information  
Important safety information  
Traffic safety  
Do not use a hand-held telephone while driving a vehicle. If using a  
hand-held phone park the vehicle before conversing.  
Always secure the phone in its holder; do not place the phone on the  
passenger seat or where it can break loose in a collision or sudden stop.  
The use of an alert device to operate a vehicle’s lights or horn on  
public roads is not permitted.  
Remember, road safety always comes first!  
Operating environment  
Remember to follow any special regulations in force in any area and  
always switch off your phone whenever it is forbidden to use it, or  
when it may cause interference or danger.  
When connecting the phone or any accessory to another device, read  
its user’s guide for detailed safety instructions. Do not connect  
incompatible products.  
As with other mobile radio transmitting equipment, users are advised  
that for the satisfactory operation of the equipment and for the  
safety of personnel, it is recommended that the equipment should  
only be used in the normal operating position (held to your ear with  
the antenna pointing over your shoulder).  
Electronic devices  
Most modern electronic equipment is shielded from radio frequency  
(RF) signals. However, certain electronic equipment may not be  
shielded against the RF signals from your wireless phone.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum separation of  
6 inches (20 cm.) be maintained between a handheld wireless phone  
and a pacemaker to avoid potential interference with the pacemaker.  
These recommendations are consistent with the independent research  
by and recommendations of Wireless Technology Research.  
Persons with pacemakers:  
Should always keep the phone more than 6 inches (20 cm) from  
their pacemaker when the phone is switched on;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the pacemaker to minimize the  
potential for interference.  
If you have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
62  
     
Hearing aids  
Some digital wireless phones may interfere with some hearing aids.  
In the event of such interference, you may want to consult your  
service provider.  
Other medical devices  
Operation of any radio transmitting equipment, including cellular  
phones, may interfere with the functionality of inadequately  
protected medical devices. Consult a physician or the manufacturer  
of the medical device to determine if they are adequately shielded  
from external RF energy or if you have any questions. Switch off your  
phone in health care facilities when any regulations posted in these  
areas instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded  
electronic systems in motor vehicles (e.g. electronic fuel injection  
systems, electronic anti-skid (anti-lock) braking systems, electronic  
speed control systems, air bag systems). Check with the manufacturer  
or its representative regarding your vehicle. You should also consult the  
manufacturer of any equipment that has been added to your vehicle.  
Posted facilities  
Switch your phone off in any facility where posted notices so require.  
Potentially explosive atmospheres  
Switch off your phone when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas  
could cause an explosion or fire resulting in bodily injury or even death.  
Users are advised to switch off the phone while at a refueling point  
(service station). Users are reminded of the need to observe restrictions  
on the use of radio equipment in fuel depots (fuel storage and  
distribution areas), chemical plants or where blasting operations are  
in progress.  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats; chemical  
transfer or storage facilities; vehicles using liquefied petroleum gas  
(such as propane or butane); areas where the air contains chemicals  
or particles, such as grain, dust or metal powders; and any other area  
where you would normally be advised to turn off your vehicle engine.  
Vehicles  
Only qualified personnel should service the phone, or install the  
phone in a vehicle. Faulty installation or service may be dangerous  
and may invalidate any warranty which may apply to the unit.  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
63  
Do not store or carry flammable liquids, gases or explosive materials  
in the same compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates  
with great force. Do not place objects, including both installed or  
portable wireless equipment, in the area over the air bag or in the air  
bag deployment area. If in-vehicle wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Switch off your phone before boarding an aircraft. The use of wireless  
telephones in an aircraft may be dangerous to the operation of the  
aircraft, disrupt the wireless telephone network and may be illegal.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Emergency calls  
IMPORTANT!  
This phone, like any wireless phone, operates using radio signals,  
wireless and landline networks as well as user- programmed  
functions which cannot guarantee connection in all conditions.  
Therefore, you should never rely solely upon any wireless phone  
for essential communications (e.g. medical emergencies).  
Remember, to make or receive any calls the phone must be switched  
on and in a service area with adequate signal strength. Emergency  
calls may not be possible on all wireless phone networks or when  
certain network services and/or phone features are in use. Check with  
local service providers.  
Making an emergency call  
1
If the phone is not on, switch it on.  
2
Press and hold the  
key for several seconds to  
ready the phone for calls.  
3
4
Key in the emergency number for your present location  
(e.g. 911 or other official emergency number). Emergency  
numbers vary by location.  
Press Call  
If certain features are in use (Keyguard, call restrictions, etc.), you may  
first need to turn those features off before you can make an emergency  
call. Consult this document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary  
information as accurately as possible. Remember that your wireless  
phone may be the only means of communication at the scene of an  
accident - do not cut off the call until given permission to do so.  
64  
   
Radio frequency (RF) signals  
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS  
FOR EXPOSURE TO RADIO WAVES.  
Your wireless phone is a radio transmitter and receiver. It is designed  
and manufactured not to exceed the emission limits for exposure  
to radiofrequency (RF) energy set by the Federal Communications  
Commission of the U.S. Government. These limits are part of compre-  
hensive guidelines and establish permitted levels of RF energy for the  
general population. The guidelines are based on standards that were  
developed by independent scientific organizations through periodic  
and thorough evaluation of scientific studies. The standards include a  
substantial safety margin designed to assure the safety of all persons,  
regardless of age and health.  
The exposure standard for wireless mobile phones employs a unit  
of measurement known as the Specific Absorption Rate, or SAR.  
The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted  
using standard operating positions accepted by the FCC with the  
phone transmitting at its highest certified power level in all tested  
frequency bands. Although the SAR is determined at the highest  
certified power level, the actual SAR level of the phone while operating  
can be well below the maximum value. This is because the phone is  
designed to operate at multiple power levels so as to use only the  
power required to reach the network. In general, the closer you are to  
a wireless base station antenna, the lower the power output.  
Before a phone model is available for sale to the public, it must be  
tested and certified to the FCC that it does not exceed the limit  
established by the government-adopted requirement for safe exposure.  
The tests are performed in positions and locations (e.g., at the ear) as  
required by the FCC for each model. The highest SAR value for this  
model phone when tested for use at the ear is 1.46 W/kg. While there  
may be differences between the SAR levels of various phones and at  
various positions, they all meet the government requirement.  
The FCC has granted an Equipment Authorization for this model phone  
with all reported SAR levels evaluated as in compliance with the FCC  
RF exposure guidelines. SAR information on this model phone is on  
file with the FCC and can be found under the Display Grant section  
_____________________________________________________  
*In the United States and Canada, the SAR limit for mobile phones  
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of  
tissue. The standard incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements.  
65  
 
Care and maintenance  
Your phone is a product of superior design and craftsmanship and  
should be treated with care. The suggestions below will help you to  
fulfill any warranty obligations and allow you to enjoy this product  
for many years. When using your phone, battery, charger, OR any  
accessory:  
Keep it and all its parts and accessories out of small children’s  
reach.  
Keep it dry. Precipitation, humidity and liquids contain minerals  
that will corrode electronic circuits.  
Do not use or store it in dusty, dirty areas as its moving parts can  
be damaged.  
Do not store it in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt  
certain plastics.  
Do not store it in cold areas. When the phone warms up (to its  
normal operating temperature), moisture can form inside the  
phone, which may damage the phone's electronic circuit boards.  
Do not attempt to open it. Non-expert handling of the device  
may damage it.  
Do not drop, knock or shake it. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean it. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint it. Paint can clog the device’s moving parts and  
prevent proper operation.  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas, modifications or attachments could  
damage the phone and may violate regulations governing radio  
devices.  
If the phone, battery, charger, or any accessory is not working  
properly, take it to your nearest qualified service facility.  
The personnel there will assist you, and if necessary, arrange for  
service.  
66  
   
16. Technical information  
Transmitting power: Up to 600 mW nominal  
Operating voltage:  
Frequency band:  
3.6 V nominal  
lowband 824.04 - 848.97 MHz (TX)  
869.04 - 893.97 MHz (RX)  
highband 1850.04 - 1909.92 MHz (TX)  
1930.08 - 1989.96 MHz (RX)  
Number of channels: 832 lowband  
1997 highband  
Number of NAMs  
Memory locations:  
Memory capacity:  
2
100  
16 characters per name  
32 characters per number  
Part No. 9352567  
Printed in Canada  
01/01  
Nokia, Connecting People and the Original Accessories logos are  
trademarks of Nokia Corporation and/or its affiliates.  
The information contained in this User Guide was written for Nokia  
phone NSW-1NX.  
The right to make changes and improvements to any of the products  
described in this guide without prior notice is reserved.  
Phase 3 Issue 3 © 1999–2001. Nokia Inc. All rights reserved.  
These commodities are authorized by the U.S. Government for export  
only to Canada, Mexico, or the United States. They may not be  
resold, diverted, transferred, or otherwise disposed of in any other  
country, either in their original form or after being incorporated  
through an intermediate process into other end-items, without the  
written approval of the U.S. Department of State.  
Para obtener un manual del usuario en español favor de  
llamar o enviar un fax al teléfono 1-888-NOKIA2U  
(1-888-665-4228), fax 813-249-9619.  
For alternate formats of this owner's manual, call our  
Customer Care center at 1-888-665-4228 (NOKIA2U).  
67  
   
17. NOKIA One-Year Limited  
Warranty  
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is  
free from defects in material and workmanship that result in Product  
failure during normal usage, according to the following terms and  
conditions:  
1. The limited warranty for the Product extends for ONE (1) year  
beginning on the date of the purchase of the Product.  
2. The limited warranty extends to the original purchaser of the  
Product (“Consumer”) and is not assignable or transferable to any  
subsequent purchaser/end-user.  
3. The limited warranty extends only to Consumers who purchase the  
Product in the United States.  
4. During the limited warranty period, Nokia will repair, or replace, at  
Nokia's option, any defective parts, or any parts that will not properly  
operate for their intended use with new or factory rebuilt replacement  
items if such repair or replacement is needed because of product  
malfunction or failure during normal usage. No charge will be made to  
the Consumer for any such parts. Nokia will also pay for the labor  
charges incurred by Nokia in repairing or replacing the defective parts.  
The limited warranty does not cover defects in appearance, cosmetic,  
decorative or structural items, including framing, and any non-  
operative parts. Nokia's limit of liability under the limited warranty  
shall be the actual cash value of the Product at the time the Consumer  
returns the Product for repair, determined by the price paid by the  
Consumer for the Product less a reasonable amount for usage. Nokia  
shall not be liable for any other losses or damages. These remedies are  
the Consumer’s exclusive remedies for breach of warranty.  
5. Upon request from Nokia, the Consumer must prove the date of  
the original purchase of the Product by a dated bill of sale or dated  
itemized receipt.  
6. The Consumer shall bear the cost of shipping the Product to Nokia  
in Melbourne, Florida. Nokia shall bear the cost of shipping the Product  
back to the Consumer after the completion of service under this  
limited warranty.  
7. The Consumer shall have no coverage or benefits under this  
limited warranty if any of the following conditions are applicable:  
a) The Product has been subject to abnormal use, abnormal conditions,  
improper storage, exposure to moisture or dampness, unauthorized  
modifications, unauthorized connections, unauthorized repair, misuse,  
neglect, abuse, accident, alteration, improper installation, or other acts  
which are not the fault of Nokia, including damage caused by shipping.  
68  
   
b) The Product has been damaged from external causes such as  
collision with an object, or from fire, flooding, sand, dirt, windstorm,  
lightning, earthquake or damage from exposure to weather conditions,  
an Act of God, or battery leakage, theft, blown fuse, or improper use of  
any electrical source, or damage caused by the connection to other  
products not recommended for interconnection by Nokia.  
c) Nokia was not advised by the Consumer in writing of the alleged  
defect or malfunction of the Product within fourteen (14) days after  
the expiration of the applicable limited warranty period.  
d) The Product serial number plate or the accessory data code has  
been removed, defaced or altered.  
e) The defect or damage was caused by the defective function of the  
cellular system or by inadequate signal reception by the external  
antenna.  
8. If a problem develops during the limited warranty period, the  
Consumer shall take the following step-by-step procedure:  
a) The Consumer shall return the Product to the place of purchase for  
repair or replacement processing.  
b) If “a” is not convenient because of distance (more than 50 miles)  
or for other good cause, the Consumer shall ship the Product prepaid  
and insured to:  
Nokia Inc.  
Attn: Repair Department  
795 West Nasa Blvd.  
Melbourne, FL. 32901  
c) The Consumer shall include a return address, daytime phone  
number and/or fax number, complete description of the problem,  
proof of purchase and service agreement (if applicable). Expenses  
related to removing the Product from an installation are not covered  
under this limited warranty.  
d) The Consumer will be billed for any parts or labor charges not  
covered by this limited warranty. The Consumer will be responsible  
for any expenses related to reinstallation of the Product.  
e) Nokia will repair or authorize the repair of the Product under the  
limited warranty within 30 days after receipt of the Product by Nokia  
or an Nokia authorized service center. If Nokia cannot perform repair  
covered under this limited warranty within 30 days, or after a  
reasonable number of attempts to repair the same defect, Nokia at  
its option, will provide a replacement Product or refund the purchase  
price of the Product less a reasonable amount for usage.  
69  
f) If the Product is returned to Nokia during the limited warranty  
period, but the problem with the Product is not covered under the  
terms and conditions of this limited warranty, the Consumer will be  
notified and given an estimate of the charges the Consumer must  
pay to have the Product repaired, with all shipping charges billed to  
the Consumer. If the estimate is refused, the Product will be returned  
freight collect. If the Product is returned to Nokia after the expiration  
of the limited warranty period, Nokia's normal service policies shall  
apply and the Consumer will be responsible for all shipping charges.  
9. The Product consists of newly assembled equipment that may  
contain used components that have been reprocessed to allow  
machine compliance with Product performance and reliability  
specifications.  
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR  
A PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION  
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE  
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND  
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,  
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT  
LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF  
SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE  
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST  
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE  
CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND  
INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH  
OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR  
EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF  
SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN  
RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF  
USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.  
11. Some states do not allow limitation of how long an implied  
warranty lasts, so the above one-year warranty limitation may not  
apply to you (the Consumer). Some states do not allow the exclusion  
or limitation of incidental and consequential damages, so certain of  
the above limitations or exclusions may not apply to you (the  
Consumer). This limited warranty gives the Consumer specific legal  
rights and the Consumer may also have other rights which vary from  
state to state.  
12. Nokia neither assumes nor authorizes any authorized service  
center or any other person or entity to assume for it any other  
obligation or liability beyond that which is expressly provided for in  
this limited warranty including the provider or seller of any extended  
warranty or service agreement.  
70  
13. This is the entire warranty between Nokia and the Consumer, and  
supersedes all prior and contemporaneous agreements or understandings,  
oral or written, and all communications relating to the Product, and  
no representation, promise or condition not contained herein shall  
modify these terms.  
14. This limited warranty allocates the risk of failure of the Product  
between the Consumer and Nokia. The allocation is recognized by  
the Consumer and is reflected in the purchase price of the Product.  
15. Any action or lawsuit for breach of warranty must be commenced  
within eighteen (18) months following delivery of the Product.  
16. Questions concerning this limited warranty may be directed to:  
Nokia Customer Care Center, USA  
Nokia Inc.  
7725 Woodland Center Boulevard, Suite #150  
Tampa, FL 33614  
Telephone: 1-888-NOKIA2U (1-888-665-4228)  
Facsimile: (813) 249-9619  
TTY Users: 1-800-24NOKIA (1-800-246-6542)  
17. The limited warranty period for Nokia supplied attachments and  
accessories is specifically defined within their own warranty cards  
and packaging.  
71  
call waiting 29  
answering a waiting call 29  
cancelling 29  
caller ID 17  
showing/hiding number 32  
calling card  
making calls 33  
set-up 18  
calls  
answering 16  
answering automatically  
answering with call  
waiting 29  
ending 29  
forwarding 30  
initiating a second 28  
making 15  
muting 15, 28  
silencing an incoming  
call 17  
switching between 28  
three-way calling 28  
unmuting 15, 28  
care and maintenance 66  
chargers 58  
clear key 7  
clearing call lists 40  
clock 20  
18. Index  
A
ABC mode 11  
access codes 51  
accessories 55  
batteries 57  
chargers 58  
covers 55  
alarm clock 48  
answering a call 16  
automatic answer 34  
antenna 14  
external jack 7  
automatic answer 34  
automatic redial 18  
B
batteries 57  
attaching 3  
charging 3  
discharging 4  
removing 4  
blocking calls see restricting  
calls  
C
call block see restricting  
calls  
call forwarding  
activating 30  
cancelling 30  
call log 39  
alarm clock 48  
displaying/hiding 20  
setting 20  
time format 20  
see three-way calling  
covers, changing 55  
cursor 11  
clearing lists 40  
dialed calls 40  
missed calls 39  
Options key 39  
received calls 40  
call restrictions see restrict-  
ing calls  
D
dialed calls 40  
call timers 40  
directory see phone book 36  
72  
 
menu 8  
shortcuts 9  
E
editing names/numbers 38  
message alert tone 22  
messages  
emergency calls 25, 64  
emergency key 9 26  
text see text messages  
voice mail 42  
missed calls 39  
muting the microphone 15, 28  
My tones (menu) 21  
erasing names/numbers 38  
external antenna jack 7  
F
factory settings, restoring 35  
G
N
game tones 22  
NAM selection 31  
games 49  
names  
editing 38  
entering 11  
erasing 38  
finding 16, 36  
saving 36  
H
help text 8  
I
Inbox 44  
in-call menu 28  
NaviTM key 6  
network feature setting 27  
new call 28  
numbers  
editing 38  
K
Keyguard 13  
keypad lock 13  
keypad tones 22  
keys  
entering 11  
erasing 38  
finding 16, 36  
saving 36  
clear key 7  
NaviTM key 6  
power key 6  
scroll keys 6  
showing/hiding your own 32  
O
L
on/off 14  
language 20  
one-touch dialing 31  
lights 7  
in car kit 21  
lock code 51  
locking the keypad 13  
locking your phone 53  
Logic 50  
P
phone book 36  
available memory 38  
scrolling view 38  
phone lock 53  
NAM selection  
power key 6  
M
making a call 15  
memory 38  
Memory (game) 49  
profiles see quick alert settings  
73  
Saved folder 44, 46  
storage 44  
writing 45  
three-way calling 28  
timers 40  
tones 21  
Q
quick alert settings 23  
R
reading text messages 43  
received calls 40  
redial  
automatic 18  
last number 16  
restore factory settings 35  
restricting calls 51  
ringing option 21  
ringing tone 22  
ringing volume 22  
keypad 22  
message alert 22  
quick alert settings 23  
ringing option 21  
ringing tone 22  
ringing volume 22  
warning and game 22  
touch tones 34  
saving touch tone strings 35  
setting automatic length 35  
setting manual length 34  
S
safety guidelines 1, 62  
safety information 62  
Saved folder 44, 46  
scroll keys 6  
scrolling view 38  
security code 51  
U
unmuting the microphone  
security features 51  
send own number 32  
signal strength 14  
silencing an incoming call 17  
Snake 49  
V
vibrating alert 22  
voice mail messages 42  
voice mailbox number 24  
voice privacy 24  
volume  
earpiece 15  
ringing 22  
sound see tones  
special characters 12  
speed dialing see one-touch  
dialing  
start screen 7  
system selection 33  
W
warning and game tones 22  
warranty 68  
welcome note 24  
writing text messages 45  
T
technical information 67  
text messages 43  
forwarding 46  
Inbox 44  
reading 43  
replying 47  
74  

Nespresso ESSENZA M100 User Manual
MTD 244 648B000 User Manual
Microsoft Windows 7 Ultimate With Service Pack 1 32 Bit GLC01878 User Manual
Maxtor OneTouch STM302504OTD3E5 RK User Manual
Groupe SEB USA T FAL 8819 User Manual
Grindmaster SHUTTLE APB 330V2 User Manual
DeLonghi DC59TW User Manual
Bloomfield 2082 User Manual
American Audio UCD 200 User Manual
ABB VTR200 User Manual