Nokia 3510i User Manual

User’s Guide

9354979

Issue 2

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice

The availability of particular accessories may vary by region. Please check with the Nokia dealer nearest to

you.

9354979/ Issue 2

Contents

FOR YOUR SAFETY ..............................................................................................10

General information............................................................................................13

Stickers in the sales package .................................................................................................................13

Access codes ...............................................................................................................................................13

1. Getting started ................................................................................................15

Keys and connectors.................................................................................................................................15

Standby mode and essential indicators ..............................................................................................16

Installing the SIM card and the battery..............................................................................................17

Removing the SIM card........................................................................................................................19

Charging the battery ................................................................................................................................19

Switching the phone on and off ...........................................................................................................20

Keypad lock (Keyguard) ...........................................................................................................................21

Shared memory..........................................................................................................................................22

Changing the covers.................................................................................................................................23

Putting on the carrying strap.................................................................................................................24

Using the menu..........................................................................................................................................25

Accessing a menu function.................................................................................................................25

List of menu functions.............................................................................................................................27

2. Call functions and phone book ......................................................................35

Basic call functions...................................................................................................................................35

Making a call...........................................................................................................................................35

Redialling last number......................................................................................................................35

Answering or rejecting an incoming call.....................................................................................36

Speed dialling ......................................................................................................................................36

Call waiting..........................................................................................................................................36

Voice mailbox .............................................................................................................................................37

Call register.................................................................................................................................................37

Missed calls and received calls ..........................................................................................................38

Dialled numbers ....................................................................................................................................38

Erase recent calls lists ..........................................................................................................................38

Call counters and call timers..............................................................................................................39

Making a conference call........................................................................................................................40

Options during a call................................................................................................................................41

Call settings ................................................................................................................................................41

Voice dialling ..............................................................................................................................................42

Adding a voice tag.................................................................................................................................43

Making a call using a voice tag.........................................................................................................44

Replaying, changing or erasing a voice tag....................................................................................44

Phone book..................................................................................................................................................45

Saving names and phone numbers (Add name)............................................................................45

Saving multiple numbers and text items per name..................................................................46

Searching for a name in the phone book........................................................................................47

Editing a name, number or text item...............................................................................................47

Erasing names and numbers...............................................................................................................48

Copying phone books............................................................................................................................48

Sending and receiving a business card............................................................................................49

Selecting the phone book settings....................................................................................................49

Service numbers .....................................................................................................................................50

3. Profiles and tones............................................................................................51

Profiles..........................................................................................................................................................51

Tones .............................................................................................................................................................52

Ringing tone per name ............................................................................................................................52

4. Text and multimedia messages.......................................................................54

Writing and sending text messages.....................................................................................................54

Options for sending text messages...................................................................................................55

Writing text.................................................................................................................................................55

Setting predictive text input on or off.............................................................................................56

Using predictive text input..................................................................................................................56

Writing compound words.................................................................................................................57

Using traditional text input ................................................................................................................58

Tips for writing text...............................................................................................................................58

Writing and sending e-mails..................................................................................................................59

Templates.....................................................................................................................................................60

Inserting a text template into a message or an e-mail..............................................................60

Inserting a picture into a text message...........................................................................................61

Reading and replying to a message or an e-mail ............................................................................61

Inbox and outbox folders ........................................................................................................................63

My folders and Archive folder................................................................................................................63

Erasing text messages..............................................................................................................................64

Chat...............................................................................................................................................................64

Text message settings ..............................................................................................................................65

Message counter........................................................................................................................................66

Info messages.............................................................................................................................................66

Service command editor..........................................................................................................................66

Multimedia messages...............................................................................................................................67

Writing and sending multimedia messages ...................................................................................68

Reading and replying to a multimedia message...........................................................................69

Inbox, Outbox, Saved, and Sent items folders...............................................................................70

Settings for multimedia messages .......................................................................................................71

Gallery...........................................................................................................................................................72

5. WAP services....................................................................................................75

Setting up the phone for a WAP service.............................................................................................75

Saving the service settings received as a text message .............................................................76

Keying in the service settings manually..........................................................................................76

Settings when GSM data is the selected data bearer..............................................................77

Settings when GPRS is the selected data bearer ......................................................................78

Making a connection to a WAP service..............................................................................................79

Browsing the pages of a WAP service.................................................................................................80

General guidelines for using the phone keys.................................................................................80

WAP direct calling.................................................................................................................................82

Ending a WAP connection.......................................................................................................................82

Appearance settings of the WAP browser ........................................................................................82

Download settings.....................................................................................................................................83

Bookmarks ...................................................................................................................................................84

Receiving a bookmark...........................................................................................................................85

Service inbox...............................................................................................................................................85

To set the phone to receive service messages...............................................................................86

The cache memory ....................................................................................................................................86

Browser security ........................................................................................................................................86

Security module......................................................................................................................................87

Certificates...............................................................................................................................................87

Digital signature.....................................................................................................................................89

Signing PIN...........................................................................................................................................89

Wallet............................................................................................................................................................90

Saving and changing personal card information..........................................................................90

Personal notes.........................................................................................................................................91

Wallet settings........................................................................................................................................91

Guidelines for paying for your purchases with wallet ................................................................92

6. Settings............................................................................................................93

Time and date settings.............................................................................................................................93

Clock settings..........................................................................................................................................93

Date settings ...........................................................................................................................................93

Automatic update of date and time.................................................................................................94

Phone settings............................................................................................................................................94

Language..................................................................................................................................................94

Keyguard settings ..................................................................................................................................94

Cell info display......................................................................................................................................94

Welcome note.........................................................................................................................................95

Network selection..................................................................................................................................95

Confirm SIM service actions...............................................................................................................95

Help text activation...............................................................................................................................96

Start-up tone ..........................................................................................................................................96

Display settings .........................................................................................................................................96

Wallpaper.................................................................................................................................................96

Colour schemes.......................................................................................................................................97

Operator logo..........................................................................................................................................97

Screen saver.............................................................................................................................................98

Accessory settings.....................................................................................................................................98

Security settings........................................................................................................................................99

Restore factory settings........................................................................................................................ 100

7. Other features............................................................................................... 101

Calendar.................................................................................................................................................... 101

Making a calendar note .................................................................................................................... 102

When the phone alarm activates for a note............................................................................... 102

Alarm clock............................................................................................................................................... 103

Calculator ................................................................................................................................................. 103

Making a currency conversion ........................................................................................................ 104

Stopwatch................................................................................................................................................. 105

Timing and time splitting ................................................................................................................. 105

Lap times............................................................................................................................................... 106

Viewing and erasing times............................................................................................................... 106

Countdown timer.................................................................................................................................... 106

Games ........................................................................................................................................................ 107

Starting a game................................................................................................................................... 107

Game services and game settings.................................................................................................. 107

Applications ............................................................................................................................................. 108

Launching an application ................................................................................................................. 108

Other options available for an application or application set............................................ 109

Downloading an application............................................................................................................ 109

Memory status for applications...................................................................................................... 110

SIM services ............................................................................................................................................. 110

8. Battery statements....................................................................................... 112

Charging and Discharging.................................................................................................................... 112

CARE AND MAINTENANCE.............................................................................. 114

IMPORTANT SAFETY INFORMATION............................................................... 115

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Don't use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don't use the phone where blasting is in progress. Observe restrictions, and

follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user's guide for detailed safety

instructions. Do not connect incompatible products.

CALLING

Ensure the phone is switched on and in service. Enter the phone number,

including the area code, then press

press

. To end a call, press

. To answer a call,

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the

emergency number, then press

told to do so.

. Give your location. Do not end the call until

■ Network Services

The wireless phone described in this guide is approved for use on the EGSM 900 and GSM

1800 networks.

Dualband is a network dependent feature. Check with your local service provider if you can

subscribe to and use this feature.

A number of features included in this guide are called Network Services. These are special

services that you arrange through your wireless service provider. Before you can take

advantage of any of these Network Services, you must subscribe to them through your

service provider and obtain instructions for their use from your service provider.

Note: Some networks may not support all language-dependent characters and/or

services.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-7, ACP-8 and LCH-9.

Warning: Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other

types may invalidate any approval or warranty applying to the phone, and may

be dangerous.

For availability of approved accessories, please check with your dealer.

When you disconnect the power cord of any accessory, grasp and pull the plug,

not the cord.

General information

■ Stickers in the sales package

The stickers contain important information for service and customer support

purposes.

Attach the

package.

sticker to the Club Nokia Invitation Card included in the sales

Attach the

sticker to your warranty card.

■ Access codes

• Security code (5 digits): The security code protects your phone against

unauthorised use, and is supplied with the phone. The preset code is 12345.

Change the code in the Settings menu, see Security settings on page 100. Keep

the new code secret and in a safe place separate from your phone.

To set the phone to request the code, see Security settings on page 100.

• PIN code (4 to 8 digits): The Personal Identification Number (PIN) code

protects your SIM card against unauthorised use. The PIN code is usually

supplied with the SIM card.

To set the phone to request the PIN code each time the phone is switched on,

see Security settings on page 100.

• PIN2 code (4 to 8 digits): The PIN2 code may be supplied with the SIM card

and is required to access some functions, such as charging unit counters.

• PUK and PUK2 codes (8 digits): The Personal Unblocking Key (PUK) code is

required to change a blocked PIN code. The PUK2 code is required to change a

blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your local service

provider for the codes.

• Barring password: The barring password is needed when using the Call barring

service, see Security settings on page 100. The password is supplied by your

service provider.

1. Getting started

■ Keys and connectors

1.Power key,

Switches the phone on and off.

While in the phone book or in menu

functions, or when the keypad is locked,

briefly pressing the power key turns the

phone’s display lights on for

approximately 15 seconds.

2.Selection keys, and

The function of the keys depends on the

guiding text shown on the display

above the keys, for example Menu and

Names in standby mode.

3.Scroll keys,

and

Enables scrolling through names, phone

numbers, menus or settings. Also

adjusts the earpiece volume during a

call.

ends an active call. Exits from any function. Some functions may require

more than one press.

dials phone numbers, and answers calls. In standby mode, it shows the

most recently called number.

enter numbers and characters. Pressing and holding

your voice mailbox.

and are used for various purposes in different functions, for example,

when locking the keypad.

calls

■ Standby mode and essential indicators

When the phone is ready for use and no characters have

been entered by the user, the phone is in standby mode.

The selection keys in standby mode are Menu and Names.

xxxxxx Indicates the cellular network in which the phone is currently being used.

Shows the signal strength of the cellular network at your current location.

The higher the bar, the stronger the signal.

Shows the battery charge level. The higher the bar, the more power in the

battery.

You have received one or several text or picture messages. See Text and

multimedia messages on page 56.

You have received one or several multimedia messages. See Reading and

replying to a multimedia message on page 71.

You have received one or several voice messages. See Voice mailbox on

page 38.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 22.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tones on page 54.

The alarm clock is set to On. See Alarm clock on page 104.

The countdown timer is running. See Countdown timer on

page 107.

The stopwatch is running in the background. See Stopwatch on page 106.

All your calls are diverted to another number, Divert all voice calls. If you

have two phone lines, the divert indicator for the first line is

and for

the second line is . See Call settings on page 42.

Calls are limited to a closed user group (network service). See Security

settings on page 100.

■ Installing the SIM card and the battery

•

Keep all miniature SIM cards out of the reach of small children.

• The SIM card and its contacts can easily be damaged by scratches or bending,

so be careful when handling, inserting or removing the card.

• Before installing the SIM card, always make sure that the phone is switched off

and you can then remove the battery.

1. With the back of the phone facing you,

press the release button. Slide and lift the

back cover off the phone in the direction

of the arrows.

2. Lift the battery out of the phone, the

bottom part first.

3. Insert the SIM card into the phone. Make sure

that the SIM card is positioned correctly and

that the golden contact area on the card is

facing downwards.

4. Replace the battery.

5. Replace the back cover.

Make sure that the

locking catches on the

sides of the covers go in

the notches on the

phone.

Removing the SIM card

If you need to remove the SIM card from the phone,

remove the back cover and the battery, press the snap

of the SIM card holder down and gently push the SIM

card towards the top of the phone.

■ Charging the battery

1. Connect the lead of the charger to the

socket on the bottom of your phone.

2. Connect the charger to an AC wall socket.

The text Charging is displayed briefly if

the phone is switched on. Ifthe battery is

completely flat, it may take a few minutes

before the charging indicator appears on the display or any calls can be made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a BLC-2 battery with the ACP-7 charger takes about 3 hours and 45

minutes.

■ Switching the phone on and off

Press and hold the power key,

Note that if the phone displays Insert SIM card even though

the SIM card is properly inserted, you should contact your

network operator or service provider. Your phone does not

support 5 Volt SIM cards and the card may need to be

changed.

• If the phone asks for a PIN code, key it in (displayed as

****) and press OK.

See also PIN code request in Security settings on page 100

and Access codes on page 13.

• If the phone asks for a security code, key it in (displayed

as *****) and press OK.

See also Access codes on page 13.

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

TIPS ON EFFICIENT OPERATION: Your phone has a built-in

antenna. As with any other radio transmitting device, do not

touch the antenna unnecessarily when the phone is switched

on. Contact with the antenna affects call quality and may cause

the phone to operate at a higher power level than otherwise

needed. Not touching the antenna area during a phone call

optimises the antenna performance and the talktime of your

phone.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed, for

example, when your phone is in your bag.

• Locking the keypad

In standby mode, press Menu and then

within

1.5 seconds to lock the keypad.

When the keypad is locked,

of the display.

appears at the top

• Unlocking the keypad

Press Unlock and then

within 1.5 seconds to

unlock the keypad.

• When keyguard is on

To answer a call, press

. During a call, the phone can be operated normally.

When you end or reject a call, the keypad will automatically lock.

• Automatic keyguard

You can set the keypad to lock automatically after a certain amount of time.

See Keyguard settings on page 95.

Note: When Keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number). Key

in the emergency number and press

have keyed in its last digit.

. The number is displayed only after you

■ Shared memory

The following features in your phone may share memory: phone book, text and

multimedia messages, images and ringing tones in gallery, calendar, and Java

games and applications. Using any such features may reduce the memory

available for any features sharing memory. This is especially true with heavy use of

any of the features (although some of the features may have a certain amount of

memory specially allotted to them in addition to the amount of memory shared

with other features). For example, saving many images, bookmarks, java apps, etc.

may take all of the shared memory and your phone may display a message that the

memory is full. In this case, delete some of the information or entries stored in the

shared memory features before continuing.

■ Changing the covers

Before changing either cover, always switch off the power and disconnect the phone from

the charger or any other device. Always store and use the phone with the covers attached.

1. To remove the back cover of the phone,

with the back of the phone facing you,

press the back cover release button and

slide the cover off the phone. See

Installing the SIM card and the battery on

page 18.

2. Gently pull the front cover off the phone,

starting from the bottom.

3. Replace the key mat on the new front cover, if

necessary.

4. To replace the front cover, align the bottom

of the phone with the bottom of the front

cover and gently push the phone towards the

cover. Ensure that the locking catches on the

sides go in the notches on the phone, and

that the cover is locked into place.

5. To replace the back cover of the phone, direct

it towards the locking catches on the front

cover and slide the back cover until it locks into place. See Installing the SIM

card and the battery on page 18.

■ Putting on the carrying strap

1. Take off the back and front covers, see Changing the covers on

page 24.

2. Lift the power key from the edge as shown in the

picture.

You can also remove the power key completely, but

make sure not to lose it.

Insert the carrying strap by threading it as

shown in the picture and pulling it tight.

3. Press the power key back in. Make sure it is

properly in place.

4. Replace the front and back covers, see Changing the covers on page 24.

■ Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To activate

the help texts, see Help text activation on page 97. To view the help text, scroll to

the menu function you want and wait for 15 seconds. To exit the help text, press

Back.

Accessing a menu function

By scrolling

1. To access the menu, press Menu.

2. Scroll through the menu and choose, for example, Settings by pressing Select.

3. If the menu contains submenus, select the one you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

By shortcuts

The menus, submenus and setting options are numbered and you can access them

using their shortcut numbers. The shortcut number is shown on the top right

corner of the display.

• To access the menu, press Menu and within two seconds key in the index

number of the menu function you want to access.

For example, to set the Anykey answer On, press Menu,

and

■ List of menu functions

1. Phone book

1. Search

2. Add name

3. Edit name

4. Delete

5. Copy

6. Add number

7. Settings

1. Memory in use

2. Phone book view

3. Memory status

8. Speed dials

9. Voice tags

10.Service nos.

11.My numbers

2. Messages

1. Text messages

1. Create message

2. Inbox

3. Create e-mail

4. Sent items

1. Visible only if supported by your operator or service provider.

2. Network service

5. Archive

6. Templates

7. My folders

8. Delete messages

1. All messages

2. Inbox

3. Sent items

4. Archive

2. Multimedia msg.

1. Create message

2. Inbox

3. Outbox

4. Sent items

5. Saved items

6. Delete messages

3. Chat

4. Voice messages

1. Listen to voice messages

2. Voice mailbox number

5. Info messages

6. Message settings

1. Text messages

2. Multimedia msg.

3. Other settings

7. Service command editor

3. Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Delete recent call lists

1. All

2. Missed

3. Received

4. Dialled

5. Call duration

1. Last call duration

2. Received calls' duration

3. Dialled calls' duration

4. All calls' duration

5. Clear timers

6. Call costs

1. Last call units

2. All calls' units

3. Call cost settings

7. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

8. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

9. Message counter

4. Tones

1. Tone settings

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Keypad tones

7. Warning tones

2. Tone services

5. Profiles

1. General

1. Activate

2. Personalise

3. Timed

2. Silent

3. Discreet

4. Loud

5. My style 1

6. My style 2

6. Settings

1. Time and date settings

1. Clock

2. Date

3. Auto-update of date & time¹

2. Call settings

1. Call divert

2. Anykey answer

3. Automatic redial

4. Speed dialling

5. Call waiting

6. Summary after call

7. Send my caller identity

8. Line for outgoing calls

3. Phone settings

1. Language

2. Automatic keyguard

3. Cell info display

4. Welcome note

5. Network selection

6. Confirm SIM service actions

7. Help text activation

8. Start-up tone

4. Display settings

1. Wallpaper

1. Network service

2. Colour schemes

3. Operator logo

4. Screen saver timeout

5. Accessory settings

1. Headset

2. Handsfree

3. Loopset

6. Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Change of access codes

7. Restore factory settings

7. Gallery

1. View folders

2. Add folder

3. Delete folder

4. Rename folder

5. Gallery servs.

1. Note that the operator logo is dimmed, if you have not ever ordered any logos from service

providers.

2. Shown only when an accessory has been used.

8. Games

1. Select game

2. Game services

3. Memory

4. Settings

1. Game sounds

2. Game lights

3. Shakes

4. Game controls

9. Organiser

1. Alarm clock

2. Calendar

10.Applications

1. Select app.

2. App. services

3. Memory

11.Extras

1. Calculator

2. Countdown timer

3. Stopwatch

4. Wallet

12.Services

1. Home

2. Bookmarks

3. Service inbox

4. Settings

1. Active service settings

2. Edit active service settings

3. Appearance settings

4. Cookie settings

5. Certificates

6. Security module settings

7. Service inbox settings

5. Go to address

6. Clear the cache

13.SIM services

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

2. Call functions and phone book

■ Basic call functions

Making a call

1. Key in the phone number, including the area code. To edit the number on the

display, press

to move the cursor and press Clear to delete the

character to the left of the cursor.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, area code and the phone number.

2. Press

3. Press

to call the number.

or End call to end the call (or to cancel the call attempt).

Making a call using the phone book

1. See Searching for a name in the phone book on page 48.

2. Press

to call the number on the display.

Redialling last number

In standby mode, press

once to access a list of the 20 numbers you most

recently called or attempted to call. Scroll to the number or name you want, and

press to call the number.

Answering or rejecting an incoming call

Press

to answer the incoming call and press

to end the call.

Press

to reject the incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

Tip: If the Divert if busy function has been activated to divert calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call settings on page 42.

Speed dialling

Press Names or Menu and Phone book and select Speed dials. Scroll to the speed

dialling key number you want.

• Press Assign and then Search. Select the name first and then the number you

want to assign to that key.

• If a number has already been assigned to that key, press Options, and you can

view, change or erase the assigned number.

You can call the assigned speed dialling number in either of the following ways:

• Press the speed dialling key you want and then press

• If Speed dialling is activated, press and hold a speed dialling key until the call is

started.

Call waiting

You can answer an incoming call while you have a call in progress if you have

activated the function Call waiting, see Call settings on page 42.

During a call, press

to answer the waiting call. The first call is put on hold.

Press

to end the active call.

■ Voice mailbox

Voice mailbox is a network service. For more information and for the voice

mailbox number, contact your service provider.

If supported by the network,

will indicate new voice messages.

Setting your voice mailbox number

1. Press Menu, select Messages and Voice messages.

2. Select Voice mailbox number.

3. Key in your voice mailbox number and press OK to save it.

Calling your voice mailbox

1. In standby mode, press and hold

2. If the phone asks for the voice mailbox number, key it in and press OK.

■ Call register

The phone registers the phone numbers of missed,

received and dialled calls, as well as the approximate

length and cost of your calls.

The phone only registers missed and received calls if the network supports these

functions, and the phone is switched on and within the network’s service area.

When you press Options in the Missed calls, Received calls, and Dialled numbers

menus, you can view the date and the time of the call, edit or erase the phone

number from the list, save the number in the phone book, or send a message to the

number.

Missed calls and received calls

To view a list of the ten phone numbers from which somebody has most recently

tried to call you (network service), press Menu, select Call register and Missed

calls.

Tip: When a note about missed calls is displayed, press List to access the

list of phone numbers. Scroll to the number you would like to call and

press

To view a list of the ten phone numbers from which you have most recently

accepted calls (network service), press Menu, select Call register and Received

calls.

Dialled numbers

To view a list of the 20 phone numbers that you have most recently called or

attempted to call, press Menu, select Call register and Dialled numbers. See also

Redialling last number on page 36.

Erase recent calls lists

To erase the recent calls lists, press Menu, select Call register and select Delete

recent call lists. Select whether you want to delete all the phone numbers in the

recent calls lists, or only the numbers in the missed calls, received calls or dialled

numbers lists. You cannot undo the operation.

Call counters and call timers

Note: The actual invoice for calls and services from your service provider may

vary, depending upon network features, rounding-off for billing, taxes and so

forth.

Press Menu and select Call register. Select

•

Call duration and scroll to view the approximate duration of your incoming

and outgoing calls in hours, minutes and seconds. Your security code is needed

to clear the timers.

Each phone line has its own call timers and the timers of the selected line are

displayed. See Call settings on page 42.

Call costs (network service) and select Last call units or All calls' units to check

the cost of your last call or all calls.

Select Call cost settings and then select Clear counters or Show costs in to set

the phone to show the remaining talk time in terms of charging units, Units, or

units of currency, Currency. Contact your service provider for charging unit

prices. Select Call cost limit to limit the cost of your calls to a certain amount

of charging units or units of currency. The PIN2 code is needed for the call cost

settings.

Note: When no more charging units or currency units are left, calls may only be

possible to the emergency number programmed into your phone (e.g. 112 or

other official emergency number).

•

GPRS data counter and scroll to check the amounts of data that were most

recently sent and received, data sent and received in total, and to clear the

counters. The counter unit is a byte.

GPRS connection timer and scroll to check the duration of the last GPRS

connection or the total duration of the GPRS connection. You can also clear

the timers.

Message counter to see the number of sent and received text and picture

messages, chat messages and e-mails. Note that for example picture messages

are formed by several text messages, and the message counter counts these

text messages separately. Follow the instructions on the phone display.

■ Making a conference call

Conference calling is a network service that allows up to six people to take part in

a conference call.

1. Make a call to the first participant.

2. To make a call to a new participant, press Options and select New call.

3. Key in or search the phone book for the phone number of the new participant

and press Call. The first call is put on hold.

4. When the new call has been answered, include the first participant in the

conference call. Press Options and select Conference.

5. To add another new participant to the call, repeat steps 2 to 4.

6. To have a private conversation with one of the participants:

Press Options and select Private. Scroll to the desired participant and press OK.

Once you have finished the private conversation, re-establish the conference

call as described in step 4 above.

7. To end the conference call, press

■ Options during a call

Press Options during a call for some of the following network service options (if

they are available from your service provider and operator for the current call):

Mute or Unmute, End call, End all calls, Phone book, Menu and Hold or Unhold,

New call, Conference, Private, Answer, and Reject.

Send DTMF is used to send DTMF tone strings, for example, passwords or bank

account numbers. Key in the DTMF string, or search for it in the phone book, and

press OK. Note that you can key in the wait character (w) and the pause character

(p) by repeatedly pressing

Swap is used to switch between the active call and the call on hold.

Transfer is used to connect a call on hold to an active call and to disconnect

yourself from a call.

■ Call settings

Press Menu, select Settings and Call settings. Then select

•

Call divert to direct your incoming calls to another number. For details, contact

your service provider. Select the divert option you want and then Activate.

Divert options that are not supported by your SIM card or your network

operator may not be shown.

•

Anykey answer to answer an incoming call by briefly pressing any key, except

and

Automatic redial and your phone will make a maximum of ten attempts to

connect the call after an unsuccessful call attempt.

Speed dialling and you can call the phone number assigned to the speed

dialling keys,

, by pressing and holding the corresponding number

key.

•

Call waiting and the network will notify you of an incoming call while you have

a call in progress (network service).

Summary after call and the phone will briefly display the duration and cost

(network service) of the last call.

Send my caller identity and your phone number will be displayed to the person

you are calling (network service). If you select Set by network, the setting that

you have agreed upon with your service provider will be used.

•

Line for outgoing calls to select phone line 1 or 2 for making calls. This is a

network service. If you select Line 2 and have not subscribed to this network

service, you will not be able to make calls. However, calls on both lines can be

answered regardless of the selected line.

■ Voice dialling

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken word(s), such as a person’s name(s), can be used as a voice

tag.

Before using voice dialling, note that:

•

Voice tags are not language dependent. They are dependent on the speaker's voice.

Voice tags are sensitive to background noise. Record them and make calls in a quiet

environment.

•

When recording a voice tag or making a call by saying a voice tag, hold the phone in the

normal position near to your ear.

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: You must say the name exactly as you said it when you recorded it. This

may be difficult in, for example, a noisy environment or during an emergency, so

you should not rely solely upon voice dialling in all circumstances.

Adding a voice tag

Save or copy the names and phone numbers to which you want to add voice tags

in the phone’s memory.

You can also add voice tags to the names on the SIM card, but if you replace your

SIM card with a new one, you need to delete the old voice tags before you can add

new ones.

1. In standby mode, press

2. Scroll to the name to which you want to add a voice tag and press Details.

Scroll to the phone number you want and press Options.

3. Select Add voice tag.

4. Press Start, and speaking clearly say the word(s) you want to record as a voice

tag. Afterwards, the phone plays the recorded tag.

5. When the voice tag has been successfully saved, Voice tag saved is displayed, a

beep sounds and a symbol

appears after the phone number with the voice

tag.

Making a call using a voice tag

When an application using the GPRS connection is sending or receiving data, you

cannot make a call using voice dialling. To make a call using a voice tag, end the

application using the GPRS connection.

1. In standby mode, press and hold Names. A short tone is heard and Speak now is

displayed.

2. Say the voice tag clearly.

3. The phone plays the recognised voice tag and then dials the phone number

after 1.5 seconds.

If you are using the headset, press and hold the headset key to start the voice

dialling.

Replaying, changing or erasing a voice tag

Press Names and select Voice tags. Scroll to the name with the voice tag you want,

and press Options.

• To replay the voice tag, select Playback.

• To erase the voice tag, select Delete and press OK.

• To change the voice tag, select Change. Press Start to add the new voice tag.

■ Phone book

You can save names and phone numbers in the phone’s

memory (internal phone book) or in the SIM card’s

memory (SIM phone book).

• The internal phone book can contain a maximum of 500 names with several

numbers and text notes for each name. The total number of names that can be

saved depends on the number of the names and the phone numbers and text

items attached to them.

• The phone supports SIM cards that can save a maximum of 250 names and

phone numbers. Names and numbers saved in the SIM card’s memory are

indicated by

Saving names and phone numbers (Add name)

Names and numbers will be saved in the memory currently being used, see

Selecting the phone book settings on page 51.

1. Press Names or Menu and Phone book and select Add name.

2. Key in the name and press OK. See Writing text on page 57.

3. Key in the phone number and press OK. To key in the numbers, see Making a

call on page 36.

4. When the name and number are saved, press Done.

Tip: Quick save: In standby mode, key in the phone number. Press

Options and select Save. Key in the name and press OK.

Saving multiple numbers and text items per name

You can save a maximum of five phone numbers and three brief text items for

each name in the phone’s internal phone book. Text items saved for each name

can be, for example, street and e-mail addresses, a note and a web address.

The first number saved is automatically set as the default number, and is indicated

. When you select a name from the phone book, for example, to make a call,

the default number is used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM, since

multiple numbers and text items can only be saved in the phone’s memory. See

Selecting the phone book settings on page 51.

2. To access the list of names and phone numbers, press

mode.

in standby

3. Scroll to the name saved in the phone’s internal phone book to which you want

to add a new number or text item and press Details. (If the name is not saved

on the phone, the phone will ask you if you want to save it there.)

4. Press Options and select Add number or Add detail.

5. Select one of the following number or text types:

General is the default type used when no other number type is set as the

default number. Other number types are Mobile, Home, Office and

Fax.

Text types are

E-mail,

Web address:,

Postal addr. and

Note .

To change the number or text type, select Change type in the options list.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Changing the default number

Press

in standby mode, scroll to the name you want and press Details.

Scroll to the number you want to set as the default. Press Options and select Set

as default.

Searching for a name in the phone book

1. Press Names or Menu and Phone book, then select Search.

2. Press List to access the phone book or key in the first character(s) of the name

you are searching for and press Search. The matches appear with the pop-up

window.

3. Scroll to the name you want and press Details. Scroll to view the details of the

selected name.

Tip: To quickly find a name and phone number, press

in standby

mode. Key in the first letter(s) of the name, and/or scroll to the name you

want.

Editing a name, number or text item

Search for the name (and number) you want to edit and press Details. Scroll to the

name, number or text item you want to edit and press Options. Select Edit name,

Edit number or Edit detail, make the changes and press OK.

Erasing names and numbers

Press Names or Menu and Phone book, and select Delete.

• To delete names and numbers one by one, select One by one and scroll to the

name (and number) you want to delete. Press Delete and press OK to confirm.

• To delete all names and numbers in the phone book at once, select Delete all,

choose the phone book, Phone or SIM card, and press Delete. Press OK and

confirm with your security code.

Copying phone books

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa.

1. Press Names or Menu and Phone book, and select Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default nos.

• If you select One by one, scroll to the name you want to copy and press

Copy.

Default nos. is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied since your SIM card may not support multiple

numbers stored under one name.

4. To select whether you want to keep or erase the original names and numbers,

choose Keep original or Move original.

• If you select All or Default nos., press OK when Start copying? or Start

moving? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact details as a business card as an Over

The Air (OTA) message, if supported by the network.

• Receiving a business card

When you have received a business card as an Over The Air (OTA) message,

press Show. Press Options and select Save to save the business card in the

phone’s memory, or Discard to discard the received business card.

• Sending a business card

You can send a person’s contact info as a business card to a compatible phone

or other compatible handheld device that supports the vCard standard.

1. Search the phone book for the name and phone number you want to send,

press Options and select Send bus. card.

2. To send the business card as an OTA message, select Via text msg.

Selecting the phone book settings

1. Press Names or Menu and Phone book and then select Settings.

2. Select Memory in use and select one of the following options:

Phone and SIM to obtain names and numbers from both phone books. The

names and numbers will be saved in the phone’s memory.

Phone to use the phone’s internal phone book.

SIM card to use the SIM card’s phone book.

3. Select Phone book view and select one of the following options:

Name list to show four names at a time.

Name and no. to show one name and one phone number at a time.

4. Select Memory status. Select Phone or SIM card to see how many names and

phone numbers are currently saved and how many can still be saved in the

selected phone book.

Service numbers

You can call the service numbers of your service provider if the numbers are

included on your SIM card.

Press Names and select Service Nos. Scroll to a service number and press

call the number.

3. Profiles and tones

■ Profiles

Your phone has various setting groups, called profiles, for

which you can customise the phone’s ringing tones for

different events and environments. Firstly, personalise the profiles and then you

only need to activate a profile to use it.

Available profiles are General, Silent, Discreet, Loud, My style 1, and My style 2.

Press Menu and select Profiles. Scroll to a profile and press Select.

• To activate the profile, select Activate.

Tip: To quickly change the profile in standby mode, press the power key

, scroll to the profile you want to activate and press Select.

• To set the profile to be active for a certain amount of time up to 24 hours,

select Timed and set the desired time length. When the time set for the profile

expires, the previous profile that was not timed becomes active.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes.

For the currently active profile, the settings can also be changed in the Tones

menu, see Tones on page 54. In addition, you can rename a profile, Profile

name. The General profile cannot be renamed.

■ Tones

Press Menu, select Tones and Tone settings. You can find

the same settings in the Profiles menu.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Select Ringing tone, Ringing volume and Vibrating alert for incoming voice calls

and incoming messages. The vibrating alert does not work when the phone is

connected to a charger, desktop stand or a car kit.

Select Message alert tone to set the alert tone for incoming messages, Keypad

tones, or Warning tones to set the phone to sound tones, for example, when the

battery is running out of power.

If you receive a traditional ringing tone as an OTA message, you can save it in the

Gallery. You can also download polyphonic ringing tones from a predefined WAP

site using the Tone services submenu or via MMS. The number of ringing tones you

can save in the ringing tone list depends on the size of an individual ringing tone.

If there is no free space for new ringing tones, you can replace a previously stored

ringing tone with the newly received one. The tone folder in Gallery contains both

traditional and polyphonic ringing tones.

■ Ringing tone per name

You can assign a ringing tone to each phone book memory entry. You can, for

example, assign the same ringing tone to all your friends or colleagues. Note that

you cannot assign the downloaded ringing tones.

1. Press Names or Menu and Phone book, select Search and scroll to the entry

(name) to which you want to assign a ringing tone.

2. Press Details and then Options. Select Assign tone and then choose the ringing

tone you want to assign to the entry. Note that Default means you will use the

same general ringing tone used in the active profile.

4. Text and multimedia messages

You can read, write and send text, picture and multimedia messages and e-mail,

or save your messages. All the messages in your phone’s message memory are

organised in folders.

Before you can send any text or picture messages, you need to save your message

centre number, see Text message settings on page 67.

Note: Your phone must be switched on to use these functions. Do not switch the

phone on when wireless phone use is prohibited or when it may cause

interference or danger.

■ Writing and sending text messages

Your phone is able to send and receive multi-part messages comprised of several

ordinary text messages (network service). Invoicing is based on the number of

ordinary messages needed for a multi-part message.

The number of available characters and the current part number of a multi-part

message are shown on the top right of the display.

1. Press Menu, and select Messages, Text messages and Create message.

2. Key in a message. See Writing text on page 57.

See also Templates on page 62.

3. To send the message, press Options and select Send.

4. Enter the recipient’s phone number, or search for it in the phone book, and

press OK to send the message.

Note: When sending messages via the SMS network service, your phone may

display the words "Message Sent". This is an indication that the message has been

sent by your phone to the message centre number programmed into your phone.

This is not an indication that the message has been received at the intended

destination. For more details about SMS services, check with your service provider.

Options for sending text messages

After you have written a message, press Options, and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done.

• To send a message using a message profile, select Sending profile and then the

message profile you want to use.

For example, if you select a profile that you have defined for sending e-mail

messages, key in or search the phone book for the recipient’s e-mail address

and press OK. Key in the e-mail service number and select Accept to send the

message.

To define a message profile, see Text message settings on page 67.

■ Writing text

You can key in text, for example, when writing messages, using the traditional

method, or another method called predictive text input.

When you are writing text, predictive text input is indicated by

and

traditional text input by at the top left of the display. The character case is

indicated by Abc, abc, or ABC next to the text input indicator, and you can change

the character case by pressing

. The number mode is indicated by 123, and

you can switch between letter and number modes by pressing and holding

Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set the predictive text input on, select a language from the dictionary

options list. Predictive text input is only available for the languages in the list.

• To change back to traditional text input, select Dictionary off.

Tip: To quickly set predictive text input on or off when writing text, press

twice, or press and hold Options.

Using predictive text input

You can key in any letter from A to Z with a single keypress. Predictive text input is

based on a built-in dictionary to which you can also add new words.

1. Start writing a word by using the keys

. Press each key only once

for one letter. The word changes after each keystroke.

For example, to write Nokia when the English dictionary is selected, press

once for N, once for o, once for k, once for i and once

for a:

To insert a number while in letter mode, press and hold the desired number key.

For more instructions on writing text, see Tips for writing text on page 60.

2. When you have finished writing the word and it is correct, confirm the word by

pressing

If the word is not correct, you have the following options:

• Press repeatedly until the word you want appears and then confirm it.

or adding a space with

• Press Options and select Matches.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and confirm it by pressing . Write the last part

of the word and confirm it by pressing

Using traditional text input

Press a number key,

, repeatedly until the character you want appears.

Not all of the characters available under a number key are printed on the key. The

characters available depend on the language selected in the Language menu, see

Language on page 95.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or press

The most common punctuation marks and special characters are available

under the number key

and then key in the letter.

•

For more instructions on writing text, see Tips for writing text below.

Tips for writing text

You can also use the following keys for writing text:

• To insert a space, press

• To move the cursor to the right or left, press

or , respectively.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly.

• To insert a special character when using traditional text input, press

, or

when using predictive text input, press and hold

, or press Options and

select Insert symbol.

Scroll through the list of characters and press Use to select a character.

To scroll through the list more quickly, press

to select a character.

, and press

• To insert a number while in letter mode, press Options and select Insert

number. Key in the numbers you want and press OK.

• To insert a name or a phone number by searching for it in the phone book, press

Options and select Insert name or Insert number.

• To insert a word when using predictive text input, press Options and select

Insert word. Write the word using traditional text input and press Save. The

word is also added to the dictionary.

■ Writing and sending e-mails

Before you can send any e-mails via SMS you need to save the settings for e-mail

sending, see Text message settings on page 67. For availability and subscription to

the e-mail service, contact your network operator or service provider. To save an

e-mail address in the phone book, see Saving multiple numbers and text items per

name on page 47.

1. Press Menu, and select Messages, Text messages and Create e-mail.

2. Key in the recipient’s e-mail address or search for it in the phone book and

press OK.

3. You can key in a subject for the e-mail if you want and press OK.

4. Key in the e-mail message. See Writing text on page 57. The number of

characters you can key in is shown on the top right of the display. The e-mail

address and subject are included in the total number of characters.

See also Templates on page 62. Inserting a picture is not possible.

5. To send the e-mail, press Options and select Send e-mail. If you have not saved

the settings for sending e-mails, the phone asks for the e-mail server number.

Press OK to send the e-mail.

Note: When sending e-mails via the SMS network service, your phone may display

the words Message sent. This is an indication that the e-mail has been sent by your

phone to the e-mail server. This is not an indication that the e-mail has been

received at the intended destination. For more details about e-mail services, check

with your service provider.

■ Templates

Your phone icludes text templates, indicated by

, and picture templates,

indicated by

. You can also save new pictures from the Nokia website,

http://www.club.nokia.com.

To access the template list, press Menu and select Messages, Text messages and

Templates.

Inserting a text template into a message or an e-mail

When you are writing or replying to a message, or an e-mail, press Options. Select

Use template and select the template you want to insert.

Inserting a picture into a text message

Your phone includes picture message templates. You can also save new pictures

into the Templates folder. More pictures can be found on the Nokia website,

http://www.club.nokia.com.

Note: This function can be used only if it is supported by your network operator or

service provider. Only phones that offer picture message features can receive and

display picture messages.

• Each picture message is made up of several text messages. Therefore, sending

one picture message may cost more than sending one text message.

• Since picture messages are saved in the phone’s memory, you cannot view

them if you use your SIM card with another phone.

When you are writing or replying to a message, press Options. Select Insert

picture and select a picture to view it. Press Insert to insert the picture into your

message. The

indicator on the header of the message indicates that a picture

has been attached. The number of characters that you can enter in a message

depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

■ Reading and replying to a message or an e-mail

When you have received a text message or an e-mail, the indicator

and the

number of new messages followed by messages received are shown.

The blinking

indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages.

1. Press Show to view the message, or press Exit to view it later.

Reading the message later:

Press Menu, and select Messages, Text messages, and Inbox.

2. If more than one message has been received, select the message you want to

read. An unread text message is indicated by

unviewed picture message by

in front of it and an

3. While reading or viewing the message, press Options.

You can select, for example, an option to delete, forward, or edit the message

as a text message or an e-mail, move, or rename the message you are reading.

Select Copy to calend. to copy text from the beginning of the message to your

phone’s calendar as a reminder note for the current day.

Select Message details to view the sender’s name and phone number, the

message centre used, and the date and time of receipt.

Select Use detail to extract numbers, e-mail addresses, and website addresses

from the current message.

When viewing a picture message, select Save picture to save the picture in the

Templates folder.

4. Select Reply to reply to a message. Select Original text to include the original

message in the reply, or select a standard answer to be included in the reply, or

select Empty screen.

When replying to an e-mail, confirm or edit the e-mail address and subject

first. Then write your reply message.

5. Press Options, select Send, and press OK to send the message to the displayed

number.

■ Inbox and outbox folders

After you have read a new text or picture message, the phone saves the message

in the Inbox folder of the Messages menu.

You can save messages that you want to send later in the Templates or Archive

folder.

■ My folders and Archive folder

To organise your messages, you can add new folders and then move messages to

the new folder or to Archive folder.

To add or delete a folder, press Menu, select Messages, Text messages and My

folders.

• To add a folder, press Options and select Add folder.

• To delete a folder, scroll to the folder you want to delete, press Options and

select Delete folder.

To move a message to another folder, press Options while reading the message

you want to move. Select Move, scroll to the folder to which you want to move the

message and press OK.

■ Erasing text messages

Press Menu, select Messages, Text messages and select Delete messages.

To delete all messages in a folder, scroll to the folder and press Select. Then press

OK when Delete all messages? is displayed.

■ Chat

You can have a conversation with other people using this faster text message

service. Messages sent or received during a chat session are not saved.

1. To start a chat, press Menu, select Messages and Chat. Key in or search the

phone book for the phone number of the person with whom you want to chat

and press OK.

Another way to start a chat: When you have received a message, press Show

to read it. To start a chat, press Options and select Chat.

2. Key in your nickname for the chat and press OK.

3. Write your chat message, see Writing text on page 57.

4. To send the message, press Options and select Send.

5. The reply message from the other person is shown above your original

message. To reply to the message, press OK and repeat step 3.

To view the most recent messages of the current chat session, press Options and

select Chat history. The messages you sent are indicated by "<" and your

nickname, and the messages you received by ">" and the sender’s nickname. Press

Back to return to the message you are writing.

To edit your nickname, select the option Chat name.

■ Text message settings

Text message settings affect the sending of messages.

Press Menu, select Messages, Message settings, and Text messages. If more than

one message profile set is supported by your SIM card, select the message profile

set that you want to change. Select

•

Message centre number to save the phone number of the message centre. You

need the message centre number to send text and picture messages. You will

receive the number from your service provider.

•

Messages sent as to select the message format.

Message validity to set the length of time that the network will attempt to

send you a message, for example, when your phone is turned off.

•

Default recipient no. to save a default number for sending messages for this

message profile.

Delivery reports to ask the network to send delivery reports about your

messages (network service).

•

Use GPRS to set GPRS as the preferred SMS bearer.

Reply via same centre to allow the recipient of your message to send you a

reply via your message centre (network service)

•

Rename sending profile to change the name of the selected message profile.

■ Info messages

With the info message network service, you can receive messages on various

topics, for example weather or traffic conditions, from your service provider. For

available topics and relevant topic numbers, contact your service provider.

If the GPRS connection is set to Always online, the info messages may not be

received. In that case, set the GPRS connection to When needed, see Setting up

the phone for a WAP service on page 76.

■ Service command editor

Press Menu, select Messages and Service command editor. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

■ Multimedia messages

Note: This function can be used only if it is supported by your network operator or

service provider. Only phones that offer multimedia message features can receive

and display multimedia messages.

A multimedia message can contain text, picture and polyphonic ringing tones.The

phone supports multimedia messages of size up to 45 KB. If that maximum size is

exceeded, the phone may not be able to receive the message. Depending on the

network, you may receive a text message including an Internet address where you

can view the multimedia message. Note that you cannot send a multimedia

message that includes sound.

If the message contains pictures, the phone scales them down to fit the display

area.

Note: If Allow multimedia reception is set to Yes or Home network, your operator or

service provider may charge you for every message you receive.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, PNG, and BMP.

• Sound: MIDI

If a received message contains any unsupported elements, they may be replaced

with the file name and the text Object format not supported

Note that you are not able to receive any multimedia messages if you have a call

in progress, a game or another Java application running, or an active WAP

connection over GSM data (see Keying in the service settings manually on page

81). Because delivery of multimedia messages can fail for a variety of reasons, do

not rely solely upon them for essential communications.

Writing and sending multimedia messages

To set the settings needed for multimedia messaging, see Settings for multimedia

messages on page 72. For availability and subscription to the multimedia

messaging service, contact your network operator or service provider.

1. Press Menu, and select Messages, Multimedia msg., and Create message.

2. Key in a message. See Writing text on page 57.

You can insert one picture into a multimedia message. To insert a picture, press

Options and select Insert image. The list of available folders in the Gallery is

shown. To open the desired folder, select it and then select the desired picture.

The indicator on the header of the message indicates that a picture has

been attached.

To insert a name from the phone book, press Options, and select More options

and Insert name. Scroll to the desired name, press Options and select Insert

name.

To insert a number, press Options, and select More options and Insert number.

Key in the number or search for it in the phone book, and press OK.

3. To view the message before sending it, press Options and select Preview.

4. To send the message, press Options and select Send to number (or Send to e-

mail).

5. Enter the recipient’s phone number (or e-mail address) or search for it in the

phone book. Press OK and the message is moved to the Outbox folder for

sending.

It takes longer to send a multimedia message than a text message. While the

message is being sent, the animated indicator

is displayed and you can use

other functions on the phone. If the sending is interrupted, the phone tries to

resend it a few times. If this fails, the message remains in the Outbox folder

and you can try to resend it later.

The sent messages will be saved in the Sent items folder if the setting Save sent

messages is set to Yes. See Settings for multimedia messages on page 72.

Reading and replying to a multimedia message

When your phone is receiving a multimedia message, the animated indicator

is displayed. When the message has been received, the indicator

and the text

Multimedia message received are shown.

• The blinking

indicates that the memory for multimedia messages is full,

and Memory full, view waiting multimedia is shown. Before you can receive

new messages, delete some of your old messages.

1. Press Show to view the message. Press Exit to view it later.

Reading the message later: Press Menu and select Messages, Multimedia

msg., and Inbox.

2. Scroll to view the message. Press Options and some of the following options

may be available.

•

Delete message to delete a saved message.

Reply to reply the message. To send the reply message, press Options and

select Send. The sender’s phone number (or e-mail address) is used as the

default value.

•

Forward to no. or Fwd. to e-mail to forward the message to a phone number

or e-mail address.

Edit to edit a message. You can only edit messages you have written. See

Writing and sending multimedia messages on page 69.

•

Message details to view the message subject, size and class.

Play to listen to the ringing tone in the message.

•

Save sound to save a ringing tone into the Gallery.

Save image to save a picture in the Gallery.

Inbox, Outbox, Saved, and Sent items folders

The phone saves the received multimedia messages in the Inbox folder of the

Multimedia msg. submenu.

Multimedia messages to be sent are moved to the Outbox folder of the

Multimedia msg. submenu.

The multimedia messages you want to send later can be saved in the Saved items

folder of the Multimedia msg. submenu.

The sent multimedia messages are saved in the Sent items folder of the

Multimedia msg. submenu.

■ Settings for multimedia messages

Press Menu and select Messages, Message settings, and Multimedia msg. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

•

Allow multimedia reception. Choose No, Yes or Home network to use

multimedia services. If you choose Home network, you cannot receive

multimedia messages when outside your home network.

•

Incoming multimedia messages. Select Retrieve to set the phone automatically

to fetch new multimedia messages, or select Reject if you do not wish to

receive multimedia messages.

Connection settings. Define WAP connection settings for retrieving

multimedia messages. Activate the set where you want to save the connection

settings and then edit the settings. Refer also to Keying in the service settings

manually on page 77.

•

Settings’ name. Key in the new name for the connection set and press OK.

Homepage. Key in the homepage address of the WAP service that you want

to use, press

for a dot, and press OK.

•

Session mode. Select Permanent or Temporary.

Data bearer. Select GPRS.

GPRS access point. Key in the access point name and press OK. An access

point name is needed to establish a connection with a GPRS network. You

can obtain the access point name from your network operator or service

provider.

•

IP address. Key in the address, press

for a dot, and press OK. You can

obtain the IP address from your network operator or service provider.

•

Authentication type. Select Secure or Normal.

User name. Key in the user name and press OK.

Password. Key in the password and press OK.

•

Allow adverts. You can receive or reject adverts.

To receive multimedia connection settings as a text message

You may receive the service settings as a text message from the network operator

or service provider that offers the WAP service that you want to use. For more

information, contact your network operator or service provider, or visit Club

Nokia’s website (www.club.nokia.com).

■ Gallery

You can save pictures and ringing tones, for example,

received in a multimedia message, in the folders of the

gallery, see Reading and replying to a multimedia message on page 71.

1. Press Menu and select Gallery. A list of options is shown.

2. Select View folders to open the list of folders.

Other available options are:

•

Delete folder to select a folder you want to delete. You cannot delete the

original folders in the phone.

•

Rename folder to select a folder you want to rename. You cannot rename

the original folders in the phone.

•

Add folder to add a new folder. Key in a name for the folder and press OK.

Gallery servs. to download images and tones. Select Image services or Tone

services, respectively. The phone tries to connect to the WAP page of Club

Nokia using the currently active set of service settings. If the connection

fails, you may not be able to access Club Nokia from the WAP service whose

connection settings are currently active. In this case, enter the Services

menu, activate another set of service settings, see Making a connection to a

WAP service on page 80. Try again to connect to Club Nokia.

Contact your network operator and/or the WAP service provider for the

availability of different WAP services, pricing and tariffs.

3. Select the desired folder and a list of files in the folder is shown. Graphics and

Tones are the original folders in the phone.

4. Select the desired file. Press Options and some of the following options are

available:

•

Open to open the selected file.

Delete to delete the selected file.

Set as wallpap. to set the selected file as wallpaper.

Set as ring tone to set the selected file as a ringing tone.

Move to move a file to another folder.

Rename to give a new name to the file.

Details to see the details of the file.

Sort to sort the files and folders by date, type, name, or size.

5. WAP services

You can access various WAP services such as news, weather reports,

entertainment, cinema, and online games. These services are specially designed

for mobile phones and they are maintained by WAP service providers.

The WAP services use Wireless Mark-Up Language (WML), xHTML and i-mode

HTML on their WAP pages. Web pages using the Hyper Text Mark-Up Language

(HTML) cannot be viewed on your phone.

Check the availability of WAP services, pricing and tariffs with your network

operator and/or the service provider whose services you wish to use. Service

providers will also give you instructions on how to use their services.

Note: The phone must be switched on to use this function. Do not switch on the

phone when the use of a wireless phone is prohibited or when it may cause

interference or danger.

■ Setting up the phone for a WAP service

You may receive the service settings on your phone directly from the network

operator or service provider that offers the WAP service that you want to use. For

more information, contact your network operator or service provider, or visit Club

Nokia’s Web site (www.club.nokia.com).

You can also key in the settings manually. For the correct settings, contact your

network operator or service provider. The WAP settings may be available, for

example, on the web site of the network operator or service provider.

Saving the service settings received as a text message

When you receive the service settings as a text message, Service settings received

is displayed.

• To save and activate the received settings, press Options and select Save.

If no settings are saved in Active service settings, the settings are saved in the

first free connection set and are also activated.

• To discard the received settings, press Options and select Discard.

• To view the received settings first, press Options and select View. To save the

settings, press Save.

Keying in the service settings manually

1. Press Menu, select Services and Settings.

2. Select Active service settings.

You need to activate the set in the place where you want to save the service

settings. A set is a collection of settings needed to make a connection to a WAP

service.

3. Scroll to the set you want to activate and press Activate.

4. Select Edit active service settings.

Select each of the service settings one by one and key in all the required

settings.

•

Settings' name - Key in a new name for the connection set and press OK.

•

Homepage - Key in the homepage address of the WAP service that you

want to use, press for a dot and press OK.

•

Session mode - Select Permanent or Temporary.

Connection security - Select On or Off.

When the connection security is On, the phone tries to use a secure

connection to the WAP service. If a secure connection is not available, the

connection will not be made. If you wish to connect anyway, with a non-

secure connection, you must set the connection security to Off.

•

Data bearer - Select GSM data or GPRS. For settings for the selected bearer,

see Settings when GSM data is the selected data bearer and Settings when

GPRS is the selected data bearer below.

For pricing, connection speed, and other information, contact your network

operator or service provider.

Settings when GSM data is the selected data bearer

•

Dial-up number - Key in the phone number and press OK.

•

IP address - Key in the address, press

for a dot and press OK. You can

obtain the IP address from your network operator or service provider.

•

Authentication type - Select Secure or Normal.

Data call type - Select Analogue or ISDN.

Data call speed - Select the speed you want to use, or select Automatic.

Automatic is only available if the currently selected data call type is Analogue.

The actual data call speed depends on the service provider.

•

type uses the user name and password keyed in for the following settings. If

you select Manual, the login information must be entered when establishing a

connection.

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

Settings when GPRS is the selected data bearer

•

GPRS connection - Select Always online or When needed.

If you select Always online, the phone automatically registers with a GPRS

network when you switch the phone on. Starting a WAP application creates

the connection between your phone and the network, making data transfers

possible. When you end the application, the GPRS connection ends but the

registration to the GPRS network remains.

If you select When needed, the GPRS connection is established when you

connect to a WAP service and is closed when you end the WAP connection.

•

GPRS access point - Key in the access point name and press OK.

An access point name is needed to establish a connection to a GPRS network.

You can obtain the access point name from your network operator or service

provider.

•

IP address - Key in the address, press

obtain the IP address from your network operator or service provider.

for a dot and press OK. You can

Authentication type - Select Secure or Normal.

•

connection is set to Always online, the Always online connection will be

disabled.

•

User name - Key in the user name and press OK.

Password - Key in the password and press OK.

■ Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want to use

have been activated. To activate the settings:

• Press Menu, select Services and Settings. Select Active service settings and

scroll to the set you want to activate and press Activate.

Secondly, make a connection to the WAP service. There are three ways to connect:

• Open the homepage of the WAP service:

Press Menu, select Services and Home.

Tip: To quickly open the homepage of a WAP service: Press and hold

in standby mode.

• Select a bookmark for the WAP service:

Press Menu, select Services, Bookmarks and select a bookmark.

If the bookmark does not work with the currently active service settings,

activate another set of service settings and try again.

• Key in the address of the WAP service:

Press Menu, select Services and then Go to address. Key in the address of the

WAP service, press

for special characters and press OK.

Note that it is not necessary to add the prefix http:// in front of the address

since it will be added automatically.

■ Browsing the pages of a WAP service

After you have made a connection to the WAP service, you can start browsing its

WAP pages. The function of the phone keys may vary for different WAP services.

Follow the text guides on the phone’s display. For more information, contact your

WAP service provider.

Note that if GPRS is selected as the data bearer, the indicator is shown on the

top left of the display during browsing. If there is an incoming (or outgoing) call

during a GPRS connection, the indicator is shown on the top right of the

display. The GPRS connection is suspended.

General guidelines for using the phone keys

• Use the scroll keys

• To select a highlighted item, press

• To enter letters and numbers, press the keys

characters, press the key.

to browse WAP pages.

and to enter special

• Some or all of the following options are available while a WAP connection is in

progress. Press Options and select the option you want.

Home - to return to the homepage of the WAP service

Bookmarks - to display the list of bookmarks. For details, see Bookmarks on

page 84.

Edit/Open row/Open link/Open list - to key in text or select a highlighted item

on the WAP page.

Add bookmark - to add the current WAP page to your bookmarks list.

Go to address - to key in the address of the WAP service you wish to connect to.

Service inbox - a list of service messages is displayed, see Service inbox on page

86.

Appear. sett. - see Appearance settings of the WAP browser on page 83.

Cookie settings - see Download settings on page 84.

Use number - to copy a number from the current WAP page for saving or

calling (this will end the WAP connection). If the WAP page contains several

numbers, you may select the desired one.

Reload - to reload and update the current WAP page.

Clear the cache - see The cache memory on page 87.

Security info - to view security information about the current WAP connection

and the server.

Quit - to quit browsing and end the call.

The options may also include links provided by the service provider.

WAP direct calling

Certain WAP pages support functions that you can access while browsing. This is

indicated on the WAP page. You may, for example, be able to

• make a voice call while you are on a WAP page.

• send DTMF tones while a voice call is in progress.

• save a name and a phone number from a WAP page in the phone book.

The phone asks for a confirmation before carrying out any of these functions.

■ Ending a WAP connection

When you are using a WAP service, press Options and select Quit. When Quit

browsing? is shown, press Yes.

Alternatively, press

once to end the connection (GPRS or GSM data). Press

once more to exit the WAP menu.

■ Appearance settings of the WAP browser

1. When no WAP connection is in progress

• Press Menu, select Services, Settings and Appearance settings.

When a WAP connection is in progress

• Press Options and select Appear. sett.

2. Select Text wrapping or Show images.

3. Select On or Off for Text wrapping and Yes or No for Show images.

When Text wrapping is set to On, the text continues onto the next line if it

cannot be shown on one line.

When Show images is set to No, the pictures that appear on the WAP page are

not shown. This can speed up the browsing of WAP pages that contain a lot of

pictures.

■ Download settings

You can set the phone to allow or prevent the phone receiving cookies.

A cookie is data that a WAP site saves in your phone’s browser cache memory. The

data can be, for example, your user information or your browsing preferences.

Cookies will be saved until you clear the cache memory, see The cache memory on

page 87.

1. When no WAP connection is in progress

• Press Menu, select Services, Settings and Cookie settings.

When a WAP connection is in progress

• Press Options and select Cookie settings.

2. Select Cookies and select Allow or Reject to allow or prevent the phone

receiving cookies.

■ Bookmarks

You can save a maximum of 50 WAP page addresses as bookmarks in the phone’s

memory.

1. When no WAP connection is in progress

• Press Menu, select Services and then Bookmarks.

When a WAP connection is in progress

• Press Options and select Bookmarks.

2. Scroll to the bookmark you want to use and press Options.

3. Select one of the following options:

Go to to make a connection to the WAP page associated with the bookmark.

Edit or Delete to modify or delete the selected bookmark.

Send to send the selected bookmark to another phone via SMS.

New bookmark to create a new bookmark without connecting to a WAP

service. Key in the address and the title of the WAP page and press OK.

Note that your phone may have some pre-installed bookmarks for sites not

affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose

to access them, you should take the same precautions, for security or content, as

you would with any site.

Receiving a bookmark

When you have received a bookmark from a compatible phone, press Options and

select View to view the bookmark, Save to save the bookmark, or Discard to

discard it.

■ Service inbox

The phone can receive service messages (pushed messages) sent by your service

provider. Service messages are notifications of, for example, news headlines, and

they may contain the address of a WAP service.

1. To access the service inbox when no WAP connection is in progress

When you have received a service message, 1 service message received will be

displayed. Press View to access the Service inbox.

If you press Exit, the message is moved to the Service inbox. To access the

Service inbox later, press Menu, select Services, and then Service inbox.

When a WAP connection is in progress

Press Options and select Service inbox.

2. Scroll to the message you want and press Options.

Select Retrieve to activate the browser and download the contents of the

service message.

Select Details to display detailed information about the service notification.

Select Delete to delete the selected service notification.

To set the phone to receive service messages

Press Menu, select Services, Settings, Service inbox settings, and Service

messages. To set the phone to receive service messages, select On. If you select

Off, the phone will not receive service messages. This is a network service.

■ The cache memory

Note: The information or services you have accessed are stored in the cache of your

phone. A cache is a buffer memory, which is used to store data temporarily. If you

have tried to access or have accessed confidential information requiring passwords

(for example, your bank account), empty the cache of your phone after each use.

To clear the cache memory when no WAP connection is in progress

• Press Menu, select Services and Clear the cache.

To clear the cache memory when a WAP connection is in progress

• Press Options and select Clear the cache.

■ Browser security

Security features are needed for some WAP services, such as banking services or

shopping on a WAP site. For such connections you need security certificates and

possibly a security module which may be available on your SIM card. For more

information, contact your service provider.

Security module

The security module can contain certificates as well as private and public keys. The

security module provides security services for WAP-related applications and

allows you to use a digital signature. The certificates are saved in the security

module by the SIM card issuer or the service provider.

Press Menu and select Services, Settings, and Security module settings. Select

•

Security module details to show the security module title, status, manufacturer

and serial number.

Change signing PIN to select the signing PIN you want to change. Key in the

current signing PIN code. The phone asks you to key in the new code twice.

See also Using the menu on page 26.

Start-up tone

To set the phone to play or not to play a start-up tone when the phone is switched

on, press Menu, select Settings, Phone settings, and Start-up tone.

■ Display settings

Wallpaper

You can set your phone to display a background picture, called wallpaper, when

the phone is in standby mode. Some pictures are pre-saved in the Gallery menu.

You can also receive pictures via multimedia messages or download them from

WAP pages and then save them in Gallery. Your phone supports JPEG, GIF, BMP

and PNG formats.

To select a wallpaper picture

1. Press Menu and select Settings, Display settings, and Wallpaper.

2. Select Change image and the folder list in the Gallery menu will be shown.

3. Select the folder and scroll to the desired picture.

4. To set the picture as wallpaper, press Options and select Set as wallpaper.

Note that if you delete the selected wallpaper picture from the gallery, it will still

be used as wallpaper until you replace it with another picture.

Note that the wallpaper is not displayed when the phone activates the screen

saver.

To activate or deactivate the wallpaper

Press Menu and select Settings, Display settings and Wallpaper. To activate/

deactivate the wallpaper, select On or Off, respectively.

Colour schemes

You can change the colour of some display components, for example, indicators

and signal bars.

Press Menu and selectSettings, Display settings, and Colour schemes. Select the

desired colour scheme.

Operator logo

To set your phone to display or hide the operator logo, press Menu and select

Settings, Display settings, and Operator logo. Note that the operator logo is

dimmed, if you have not ever ordered any logos from service providers.

Note that the default operator logo is shown if nothing else is chosen and the

operator logo is not displayed when the phone activates the screen saver.

Screen saver

A digital clock screen saver is used for power saving in standby mode. It activates

when no function of the phone has been used for a certain length of time. Press

any key to deactivate the screen saver. The screen saver is also deactivated when

the phone is out of the network coverage area.

Press Menu and select Settings, Display settings, and Screen saver timeout. Select

the length of time after which the digital clock display will be activated. The

timeout can vary from 5 seconds to 60 minutes.

Note that the screen saver overrides all graphics and texts that are on the display

in standby mode.

■ Accessory settings

The accessory settings menu is only shown if the phone is or has been connected

to one of the following accessories: headsets HDC-5 or HDE-2, loopset LPS-3, or

handsfree car kits PPH-1 or CARK 125.

Press Menu, select Settings and Accessory settings. Select Headset, Handsfree or

Loopset.

• Select Default profile to select the profile you want to automatically activate

when you connect the selected accessory. You can select another profile while

the accessory is connected.

• Select Automatic answer to set the phone to automatically answer an

incoming call after five seconds. If the Incoming call alert is set to Beep once or

Off, automatic answer will not be used.

• Select Lights and then On to set the lights permanently on. Select Automatic

to switch the lights on for 15 seconds after a keypress. The Lights option is only

available when Handsfree is selected.

• Select Use loopset and then Yes to use the loopset instead of the headset. Use

loopset is only available when Loopset is selected.

■ Security settings

Note: When security features, which restrict calls, are in use (call barring, closed

user group and fixed dialling), calls may be possible to certain emergency numbers

in some networks (e.g. 112 or other official emergency number).

Press Menu, select Settings and Security settings. Select

•

PIN code request to set the phone to ask for your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling to restrict your outgoing calls to selected phone numbers, if this

function is supported by your SIM card. The PIN2 code is required.

Closed user group. Closed user group is a network service that specifies a group

of people whom you can call and who can call you. For more information,

contact your network operator or service provider.

•

Security level. Select Phone and the phone will ask for the security code

whenever a new SIM card is inserted into the phone.

100

Select Memory and the phone will ask for the security code whenever you

want to select the phone’s internal memory or to copy from one memory to

another. Note that the selected memory has to be the SIM card memory. See

Selecting the phone book settings on page 51 and Copying phone books on

page 49.

•

Change of access codes and you can change security code, PIN code, PIN2 code

or barring password. Codes can only include numbers from 0 to 9.

Note that you should avoid using access codes similar to emergency numbers,

such as 112, to prevent accidental dialling of an emergency number.

■ Restore factory settings

To reset some of the menu settings to their original values, press Menu, select

Settings and Restore factory settings. Key in the security code and press OK. The

names and phone numbers saved in the phone book are not deleted.

101

7. Other features

Note: Your phone must be switched on to use these functions. Do not switch the

phone on when wireless phone use is prohibited or when it may cause interference

or danger.

■ Calendar

The calendar helps you to keep track of reminders, calls that you need to make and

birthdays. The phone will sound an alarm tone when the set date for an event has

been reached if you have set an alarm for the note.

Press Menu, select Organiser and Calendar. Scroll to the day you want. If you

want to see the day’s notes, press Optionsand select Day notes. The note indicator

is shown on the first line. You can view an individual note by scrolling to it in day

view, then pressing Options and View. The week view shows four weeks at a time.

Other options for the calendar views may include:

• Options for making a note or for sending a note directly to another phone’s

calendar or as a text message.

• Options for erasing, editing, moving, and repeating a note, and for copying a

note to another day.

•

Settings to set, for example the date, time, date format or time format. In the

Auto-delete option, you can set the phone to automatically delete old notes

after a specified time. However, the repeat notes, for example, birthday notes,

will not be deleted.

102

Making a calendar note

For keying in letters and numbers, see Writing text on page 57.

Press Menu, select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

•

Reminder - Key in the note, press Options and Save. Choose whether you

want an alarm to sound as a reminder, and enter the time if you wish.

Call - Key in the phone number, and press Options and Save. You can also

search for the number in the phone book by pressing Options and Search. Then

key in a time for the call and press OK. If you wish, select With tone to set an

alarm for the note and a time for the alarm.

•

Birthday - Key in the person’s name (or search for it in the phone book by

pressing Options and Search), press Options and Save. Then key in the year of

birth and press OK. If you key in the year, the note shows the person’s age after

their name. If you wish, select With tone to set an alarm for the note, and a

time for the alarm.

When a tone alert has been set, the indicator

notes.

is displayed when you view the

When the phone alarm activates for a note

The phone beeps and displays the note. When a call note

is on the display, you

can call the displayed number by pressing

. To stop the alarm and view the

note, press View. To stop the alarm without viewing the note, press Exit.

103

■ Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even

when the phone is switched off.

Press Menu, select Organiser and Alarm clock. Key in the alarm time and press OK.

To change the time after the alarm time has been set, select On.

Note that after you have set the alarm, you can switch off the phone, and it will

still sound an alarm at the set time.

When the alarm time expires

The phone will sound an alert tone, and Alarm! and the alarm time will flash on

the display.

Press Stop to stop the alarm. If you let the alarm continue for a minute or press

Snooze, the alarm stops for a few minutes and then resumes.

If the alarm time is reached while the phone is switched off, the phone switches itself on and

starts sounding the alarm tone. If you press Stop, the phone asks whether you want to

activate the phone for calls. Press No to switch off the phone or Yes to make and receive

calls.

Note: Do not press Yes when wireless phone use is prohibited or when it may cause

interference or danger.

■ Calculator

The calculator on your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

104

This calculator has a limited accuracy and rounding errors may occur, especially in long

divisions.

1. Press Menu, select Extras and Calculator.

2. When ’0’ is displayed on the screen, key in the first number of the calculation,

press

for a decimal point.

3. Press Options and select Add, Subtract, Multiply, Divide, Square, Square root,

or Change sign.

Tip: Alternatively, press

once to add, twice to subtract, three times

to multiply or four times to divide.

4. Key in the second number.

5. For the total, press Options and select Equals. Repeat steps 3 to 5 as many

times as is necessary.

6. To start a new calculation, press and hold Clear first.

Making a currency conversion

1. Press Menu, select Extras and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

decimal point and press OK. The exchange rate remains in the memory until

you replace it with another one.

105

3. To make the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

You can also make the currency conversion in standby mode. Key in the amount to

be converted, press Options and select In domestic or In foreign.

■ Stopwatch

You can measure time and take intermediate times or lap times using the

stopwatch. During timing, the other functions of the phone can be used.

Using the stopwatch consumes the battery and the phone's operating time will be reduced.

Be careful not to let it run in the background when performing other operations with your

phone.

Timing and time splitting

1. Press Menu, select Extras, Stopwatch, and Split timing.

You can select Continue if the stopwatch was running in the background, for

example, because of an incoming call.

2. Press Start to start timing. Press Split every time you want to take an

intermediate time. The intermediate times are listed below the running time on

the display. Scroll to view the times.

3. Press Stop to stop timing.

4. Press Options and select

•

Start to start the stopwatch again. The new time is added to the previous

time.

106

•

Save to save the time. Key in a name for the measured time and press OK. If

no name is keyed in, the total time is used as the title.

Reset to reset the time without saving it.

Lap times

Press Menu, select Extras, Stopwatch, and Lap timing. Press Start to start the

stopwatch and Lap to take a lap time. Press Stop to stop timing. Press Options and

you can save or reset the lap times. Refer to Timing and time splitting on page 106.

Viewing and erasing times

Press Menu, select Extras and Stopwatch.

If the stopwatch has not been reset, you can select Show last to view the most

recently measured time. Select View times and a list of names or the final times of

the time sets is shown. Select the time set you want to view.

To delete the saved times, press Options and select Delete times. Select All at once

and press OK, or select One by one and scroll to the times you want to delete. Press

Delete and press OK.

■ Countdown timer

Press Menu, select Extras and Countdown timer. Key in the alarm time in hours

and minutes and press OK to start the countdown timer. If you like, you can write

a note, which will be displayed when the time is reached, and press OK. When the

timer is running, the indicator is shown in standby mode.

107

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note, or if a note has not been set, Countdown time up. Stop

the alarm by pressing OK. If no key is pressed, the alarm stops after 30 seconds.

Press OK to erase the note.

To stop the countdown timer or to change the countdown time:

Press Menu, select Extras and Countdown timer. Select Change time to set the

timer again, or Stop timer to stop the timer.

■ Games

Starting a game

Press Menu, select Games and Select game. Select the game you would like to

play.

There are instructions on how to use the keys and how the game works available

for each game.

Game services and game settings

Press Menu, select Games and Game services or Settings. Select

•

Game services and the phone will try to connect to the WAP pages of Club

Nokia using the currently active service settings.

If the connection fails, you may not be able to access Club Nokia from the WAP

service whose connection settings are currently active. In this case, enter the

108

Services menu and activate another set of service settings, see Making a

connection to a WAP service on page 80. Try again to connect to Club Nokia.

For the availability of different WAP services, pricing and tariffs, contact your

network operator and/or WAP service provider.

•

Settings to set sounds, lights and vibrator, , for the game.

Under Settings, select Game controls and

•

Default to activate the optimised game settings when you are not using the

games cover.

•

Games cover to activate the optimised game settings when you are using

the games cover.

■ Applications

This menu allows you to manage the Java applications

installed on your phone. . Various service providers offer

other applications via WAP services. Before you can use one of these applications

you have to download it to your phone.

Launching an application

1. Press Menu, select Applications and Select app..

2. Scroll to an application or an application set (the name depends on the

application).

3. Press Options and select Open or press

. If the selection is a single

application it will be launched.

109

Otherwise, a list of applications in the selected application set is displayed. To

launch a single application, scroll to the desired application, press Options and

select Open, or press

Tip: If an application uses the entire display area, no selection key names

will be displayed. Press the selection key or to view the options list.

Then select one of the options or press Back to continue with the

application.

Other options available for an application or application set

•

Delete to delete the application or application set from the phone.

•

Web access to restrict the application from accessing the network. Select Ask

first and the phone will ask for net access, Allowed to allow net access, or Not

allowed not to allow net access.

•

Check version to check if a new version of the application is available for

download from the WAP service.

Web page to provide further information or additional data for the application

from an Internet page. This feature must be supported by the network. It is only

shown if an Internet address has been included with the application.

•

Details to give additional information about the application.

Downloading an application

You can download new Java applications in different ways:

110

• Press Menu, select Applications and App. services and the list of WAP

bookmarks is shown. For example, you may find an appropriate Java

application on the Club Nokia WAP pages, see Bookmarks on page 84.

• Press Menu and select Services to find a WAP page from which to download an

appropriate Java application. See Browsing the pages of a WAP service on page

81.

• Use the game download functionality, see Game services and game settings on

page 108.

Note that Nokia does not warrant for applications from non-Nokia sites. If you

choose to download Java applications from them, you should take the same

precautions, for security or content, as you would with any site.

Note that when downloading a game or an application, it may be saved in the

Games menu instead of the Applications menu.

Memory status for applications

To view the amount of memory available for game and application installations,

press Menu, select Applications and Memory. Note that the contents of the

Gallery may affect the amount of memory available for applications.

111

■ SIM services

In addition to the functions available on the phone, your

SIM card may provide additional services that you can

access in Menu 13. Menu 13 is only shown if it is supported by your SIM card. The

name and contents of the menu depend entirely on the service available.

Note: For availability, rates and information on using SIM services, contact your

SIM card vendor, e.g. network operator, service provider or other vendor.

You can set the phone to show you the confirmation messages sent between your

phone and the network when you are using SIM services by selecting the option

Yes within the menu 6-3-6, Confirm SIM service actions.

Note that accessing these services may involve sending a text message or making

a phone call for which you may be charged.

112

8. Battery statements

■ Charging and Discharging

Your phone is powered by a rechargeable battery.

Note that a new battery's full performance is achieved only after two or three complete

charge and discharge cycles!

The battery can be charged and discharged hundreds of times but it will eventually wear out.

When the operating time (talk-time and standby time) is noticeably shorter than normal, it

is time to buy a new battery.

Use only batteries approved by the phone manufacturer and recharge your battery only with

the chargers approved by the manufacturer. Unplug the charger when not in use. Do not

leave the battery connected to a charger for longer than a week, since overcharging may

shorten its lifetime. If left unused a fully charged battery will discharge itself over time.

Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose.

Never use any charger or battery which is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object (coin, clip or pen) causes direct connection of the + and - terminals of the battery

(metal strips on the battery) for example when you carry a spare battery in your pocket or

purse. Short circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 15 °C and 25 °C. A phone with a hot or cold battery may temporarily not

113

work, even when the battery is fully charged. Batteries' performance is particularly limited in

temperatures well below freezing.

Do not dispose of batteries in a fire!

Dispose of batteries according to local regulations (e.g. recycling). Do not dispose of as

household waste.

114

CARE AND MAINTENANCE

Your phone is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this

product for many years.

•

Keep the phone and all its parts and accessories out of the reach of small children.

Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits.

•

Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.

Do not store the phone in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

•

Do not store the phone in cold areas. When it warms up (to its normal temperature),

moisture can form inside, which may damage electronic circuit boards.

•

Do not attempt to open the phone. Non-expert handling may damage it.

Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.

Do not paint the phone. Paint can clog the moving parts and prevent proper operation.

Use only the supplied or an approved replacement antenna. Unauthorised antennas,

modifications or attachments could damage the phone and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your phone, battery, charger or any accessory.

If any of them is not working properly, take it to your nearest qualified service facility. The

personnel there will assist you and, if necessary, arrange for service.

115

IMPORTANT SAFETY INFORMATION

■ Traffic Safety

Do not use a hand-held telephone while driving a vehicle. Always secure the phone in its

holder; do not place the phone on the passenger seat or where it can break loose in a

collision or sudden stop.

Remember road safety always comes first!

■ Operating environment

Remember to follow any special regulations in force in any area and always switch off your

phone whenever it is forbidden to use it, or when it may cause interference or danger.

Use the phone only in its normal operating positions.

Parts of the phone are magnetic. Metallic materials may be attracted to the phone, and

persons with a hearing aid should not hold the phone to the ear with the hearing aid. Always

secure the phone in its holder, because metallic materials may be attracted by the earpiece.

Do not place credit cards or other magnetic storage media near the phone, because

information stored on them may be erased.

■ Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However,

certain electronic equipment may not be shielded against the RF signals from your wireless

phone.

116

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be

maintained between a handheld wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research. Persons

with pacemakers:

•

Should always keep the phone more than 20 cm (6 inches) from their pacemaker when

the phone is switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimise the potential for interference.

If you have any reason to suspect that interference is taking place, switch off your phone

immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such

interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your phone in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

117

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, air-bag systems). Check with the manufacturer

or its representative regarding your vehicle. You should also consult the manufacturer of

any equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

■ Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey

all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in

bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users

are reminded of the need to observe restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where blasting operations are in

progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They

include below deck on boats; chemical transfer or storage facilities; vehicles using liquified

petroleum gas (such as propane or butane); areas where the air contains chemicals or

particles, such as grain, dust or metal powders; and any other area where you would

normally be advised to turn off your vehicle engine.

118

■ Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty which may apply

to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating

properly.

Do not store or carry flammable liquids, gases or explosive materials in the same

compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do

not place objects, including both installed or portable wireless equipment in the area over

the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury could result.

Using your phone while in the air is prohibited. Switch off your phone before boarding an

aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of

the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services

to the offender, or legal action or both.

■ Emergency calls

Important:

This phone, like any wireless phone, operates using radio signals, wireless and

landline networks as well as user-programmed functions. Because of this,

connections in all conditions can not be guaranteed. Therefore, you should never

rely solely upon any wireless phone for essential communications (e.g. medical

emergencies).

119

Emergency calls may not be possible on all wireless phone networks or when certain

network services and/or phone features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the phone.

2. Press

as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the

display and ready the phone for calls.

3. Key in the emergency number for your present location (e.g. 112 or other official

emergency number). Emergency numbers vary by location.

4. Press the

key

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as

accurately as possible. Remember that your wireless phone may be the only means of

communication at the scene of an accident - do not cut off the call until given permission to

do so.

■ Certification information (SAR)

THIS MODEL PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not

to exceed the limits for exposure to radiofrequency (RF) energy recommended by The

Council of the European Union. These limits are part of comprehensive guidelines and

establish permitted levels of RF energy for the general population. The guidelines were

developed by independent scientific organisations through periodic and thorough

120

evaluation of scientific studies. The limits include a substantial safety margin designed to

assure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit recommended by The Council of the

European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard operating

positions with the phone transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the highest certified power level, the

actual SAR level of the phone while operating can be well below the maximum value. This is

because the phone is designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are to a base station

antenna, the lower the power output.

Before a phone model is available for sale to the public, compliance with the European

R&TTE directive must be shown. This directive includes as one essential requirement the

protection of the health and the safety for the user and any other person. The highest SAR

value for this model phone when tested for compliance against the standard was 0.83 W/kg.

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the EU requirements for RF exposure.

* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged

over ten grams of tissue. The limit incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements. SAR

values may vary depending on national reporting requirements and the network band. For

SAR information in other regions please look under product information at www.nokia.com.

121

LIMITED MANUFACTURER’S WARRANTY

PART OF EUROPE & AFRICA REGION

This limited warranty shall apply in part of Nokia

which all by their nature have a limited lifetime, and

breakage or damage to antennas) unless the defect

was caused directly by defects in materials, design or

workmanship;

Mobile Phones’ Europe & Africa Region unless a local

warranty exists. Nokia Corporation, Nokia Mobile

Phones (”Nokia”) warrants that this NOKIA product

(”Product”) is at the time of its original purchase free

of defects in materials, design and workmanship

subject to the following terms and conditions:

(ii) Nokia or its authorized service company was not

notified by the Customer of the defect within thirty

(30) days after the appearance of the defect within

the warranty period;

1. This limited warranty is given to the end-purchaser

of the Product (”Customer”). It shall neither

exclude nor limit i) any mandatory statutory rights

of the Customer or ii) any of the Customer’s rights

against the seller/dealer of the Product.

(iii) the Product was not returned to Nokia or its

authorized service company within thirty (30) days

after the appearance of the defect within the

warranty period;

2. The warranty period is twelve (12) months from

the date on which the first Customer purchased

the Product. In case of a subsequent purchase or

other change of owner/user, such warranty period

shall continue for the remaining part of the twelve

(12) month period and otherwise remain

unaffected. This limited warranty is only valid and

enforceable in the following countries: Bosnia,

Bulgaria, Croatia, Cyprus, the Czech Republic,

Estonia, any member state of the European Union,

Hungary, Iceland, Israel, Latvia, Lithuania,

Macedonia, Malta, Norway, Poland, Romania, the

Slovak Republic, Slovenia, Switzerland and Turkey.

(iv) the Product serial number, the accessory date

code or the IMEI number has been removed, erased,

defaced, altered or is illegible;

(v) the defect was caused by a defective function of

the cellular network;

(vi) the defect was caused by the fact that the

Product was used with or connected to an accessory

not manufactured and supplied by Nokia or used in

other than its intended use;

(vii) the defect was caused by the fact that the

battery was short-circuited or seals of the battery

enclosure or cells were broken or show evidence of

tampering or the battery was used in equipment

other than for which it has been specified; or

3. During the warranty period Nokia or its authorized

service company will repair or replace, at Nokia’s

sole discretion, a defective Product. Nokia will

return the repaired Product or another Product to

the Customer in good working condition. All parts

or other equipment for which replacements have

been provided shall become the property of Nokia.

(viii) the Product software needs to be upgraded due

to changes in cellular network parameters.

4. A repaired or replaced Product will not be given a

prolonged or renewed warranty period.

7. To claim this limited warranty the Customer shall

present either i) a legible and non-modified

original warranty card which clearly indicates the

name and address of the seller, the date and place

of purchase, the product type and the IMEI or

other serial number or alternatively ii) a legible and

non-modified original purchase receipt which

contains the same information, if such purchase

receipt is presented to the seller/dealer of the

Product.

5. This limited warranty will not cover painted covers

or other similar personalized parts. In all cases that

require unlocking or locking of an operator SIM-

lock, Nokia will first direct the Customer to such

operator for unlocking or locking of the operator

SIM-lock before repairing or replacing the Product.

6. This limited warranty shall not apply to

deterioration due to normal wear and tear. This

limited warranty shall further not apply if:

8. This limited warranty is the Customer’s sole and

exclusive remedy against Nokia and Nokia’s sole

and exclusive liability against the Customer for

defects or malfunctions of the Product. This limited

warranty replaces all other warranties and

liabilities, whether oral, written, (non-mandatory)

statutory, contractual, in tort or otherwise. Nokia is

in no event liable for any incidental, consequential

or indirect damage, costs or expenses. Neither is

Nokia in any event liable for any direct damage,

costs or expenses, if the Customer is a legal person.

(i) the defect was caused by the fact that the Product

has been subjected to: use in contradiction with the

owner’s/user manual, rough handling, exposure to

moisture, dampness or extreme thermal or

environmental conditions or rapid changes in such

conditions, corrosion, oxidation, unauthorized

modifications or connections, unauthorized opening

or repair, repair by use of unauthorized spare parts,

misuse, improper installation, accident, forces of

nature, spillage of food or liquid, influence from

chemical products or other acts beyond the

9. Any change or amendment to this limited warranty

requires Nokia’s prior written consent.

reasonable control of Nokia (including but not limited

to deficiencies in consumable parts, such as batteries

9359974/02

WARRANTY CARD

FILL IN WITH BLOCK LETTERS

Purchaser’s Name: _____________________________________________________

Address: _____________________________________________________________

_____________________________________________________________

Country: _____________________________________________________________

Phone: ______________________________________________________________

Date of Purchase (dd/mm/yy):

Product Type (on phone type label under battery):

Product Model (on phone type label under battery):

Phone Serial No (on phone type label under battery):

–

Place of Purchase: _____________________________________________________

Store Name:__________________________________________________________

Store Address: ________________________________________________________

Stamp

Nokia 3585 User Manual
Musical Fidelity CD Pre24 User Manual
Krups Coffeemaker 866 User Manual
Keurig B155 User Manual
JVC Transmit High Quality Sound AAT100BT User Manual
JVC KD S821R User Manual
HP Hewlett Packard LTO 4 SCSI User Manual
Gemini CD 4700 E User Manual
Compaq TP DESKTOP CONNECTOR AAPVNFGTE User Manual
Acu Rite Clock 13239CCD User Manual