Motorola
iDEN
Digital Multi-service Data-capable Phone
i850 Phone User’s Guide
@NNTN6135A@
NNTN6135A
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use with
the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden/support.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
Calling 2 People ..............................................51
Creating Pauses and Waits While Dialing.......52
Making International Calls...............................52
One Touch PTT...............................................52
Quick PTT .......................................................53
Setting Flip Actions .........................................54
Call Timers......................................................54
Using Your Phone as a Modem ......................55
Making TTY Calls............................................56
Contacts ................................................... 37
Accessing Contacts.........................................38
Creating Entries...............................................38
Storing Numbers Faster ..................................40
Editing Entries .................................................41
Viewing Entries................................................41
Deleting Entries...............................................43
Checking Capacity ..........................................44
Creating Pauses and Waits.............................44
International Numbers.....................................44
Making Calls From Contacts ...........................45
Accessing Contacts with GSM Phones...........45
Group Calls and Selective Dynamic
Group Calls ...........................................59
Group Calls .....................................................59
Selective Dynamic Group (SDG) Calls ...........61
Call Forwarding........................................ 47
Forwarding All Calls ........................................47
Turning Off Call Forwarding ............................48
Forwarding Missed Calls.................................48
Viewing Call Forwarding Settings....................49
Memo.........................................................66
Ring Tones................................................67
Setting Your Phone to Vibrate.........................67
Ring and Vibrate .............................................68
Assigning Ring Tones to Contacts ..................68
Viewing Ring Tone Assignments ....................68
Downloading More Ring Tones.......................69
About DRM Ring Tones ..................................69
Advanced Calling Features..................... 50
Call Waiting .....................................................50
Switching Between Calls.................................50
Putting a Call on Hold......................................51
iv
Managing Memory...........................................69
Deleting Custom Ring Tones ..........................69
Camera ......................................................82
Accessing the Camera ....................................82
Taking Pictures ...............................................82
More Actions for Captured Pictures ................84
Accessing the Media Center ...........................85
Customizing the Camera.................................85
Managing Memory ..........................................85
Entering Text............................................ 70
Using Word Mode............................................70
Special Function Keys.....................................71
Messages ................................................. 73
Message Notifications .....................................73
Message Center..............................................74
Media Center.............................................87
Viewing the Media Center...............................87
Forward Locked Items.....................................88
DRM Items ......................................................89
Pictures ...........................................................89
Audio Recordings............................................90
Renaming Items ..............................................91
Locking Items..................................................91
Deleting Items .................................................91
Accessing the Camera ....................................92
Managing Memory ..........................................92
Voice Mail Messages............................... 75
Receiving a Message......................................75
Accessing Voice Mail from
the Message Center ...................................75
Sending Unanswered Calls to Voice Mail .......75
MOSMS Messages................................... 76
Setting Up........................................................76
Receiving a Message......................................76
Reading from the Message Center .................77
Creating and Sending Messages ....................77
Sorting Messages............................................80
Managing Memory...........................................80
Digital Rights Management .....................93
Installing Items ................................................93
Understanding DRM Status Icons...................93
v
Sharing Items ..................................................93
Managing DRM Items......................................94
Java Applications...................................111
Installing Applications....................................111
Running Applications ....................................111
Suspending Applications...............................111
Resuming Applications..................................112
Ending Applications.......................................112
Downloading Applications.............................112
Deleting Applications.....................................113
Managing Memory ........................................113
Shortcuts on the Main Menu .........................113
Java Applications and GPS Enabled ............114
Using Send via PTT ................................. 97
Sending a Picture............................................97
Receiving a Picture .........................................98
Sending My Info and Contact Information.......99
My Info .................................................... 102
Viewing My Info.............................................102
Editing My Info...............................................102
Setting Sending Options................................103
GPS Enabled...........................................117
IMPORTANT: Things to Keep in Mind ..........117
Making an Emergency Call ...........................119
Viewing Your Approximate Location .............120
Enhancing GPS Performance .......................121
Updating Satellite Almanac Data ..................122
Setting Privacy Options.................................123
Using GPS with Map Software......................124
Datebook ................................................ 104
Viewing Datebook .........................................104
Creating Events.............................................105
Editing Events ...............................................107
Deleting Events .............................................107
Receiving Reminders ....................................108
Making Calls From Datebook and Datebook
Reminders ................................................108
Customizing Datebook Setup........................109
Voice Records ........................................127
Viewing Voice Records .................................127
vi
Creating Voice Records ................................127
Playing Voice Records ..................................128
Labeling Voice Records ................................128
Locking Voice Records..................................128
Deleting Voice Records.................................129
Managing Memory.........................................129
Setting Call Filtering ......................................140
Shortcuts.................................................142
Creating a Shortcut .......................................142
Using a Shortcut............................................142
Editing a Shortcut..........................................143
Deleting Shortcuts.........................................143
Customizing Your Phone...................... 130
Setting the Volume........................................130
Setting Your Phone to Vibrate.......................130
Changing the Look of Your Phone ................130
Using a Headset .....................................144
Attaching a Headset......................................144
Using a Remote PTT Button .........................144
Airplane Mode—Temporarily Turning Off
Understanding Status Messages..........145
Calls..........................................................132
Safety and General Information ............147
Using Settings ...............................................132
RF Operational Characteristics .....................147
Profiles ................................................... 137
Viewing Profiles.............................................137
Switching Profiles..........................................137
How Changing Settings Affects Profiles........137
Temporary Profiles........................................138
Creating Profiles............................................139
Editing Profiles ..............................................139
Deleting Profiles ............................................139
Portable Radio Product Operation and EME
Exposure...................................................147
Electromagnetic Interference/
Compatibility.............................................150
Medical Devices ............................................150
Operational Warnings ...................................151
Operational Cautions ....................................152
Accessory Safety Information .......................153
vii
Hearing Aid Compatibility..................... 155
MOTOROLA LIMITED WARRANTY ...... 157
Limited Warranty
Motorola Communication Products
(International) ..................................... 161
Patent and Trademark Information ...... 165
Index ....................................................... 166
Driving Safety Tips ................................ 173
viii
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
Hereby declares that the product:
Product Name: i850
encouraged to try to correct the interference
by one or more of the following measures:
Model Number: H65XAN6RR4AN
Conforms to the following regulations:
• Reorient or relocate the receiving
antenna.
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
• Increase the separation between the
equipment and receiver.
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
ix
c
Power button.
p
t
.
c
Acts like s when the flip is closed; turns
speaker on; used with voice names and
voice records.
Navigation key — press the arrows to
scroll through menus and lists.
Acts like e when the flip is closed;
accesses recent calls; sends incoming
calls to voice mail.
O
m
OK key — selects highlighted item;
answers calls.
Camera key — accesses camera;
captures picture.
Menu key — accesses context-sensitive
menus.
A
Option key — selects the option
appearing above it on the display.
To start using your i850 phone:
•
•
•
•
Make sure your SIM card is in place.
Charge the battery.
s
e
Send key — places phone calls.
End key — ends phone calls; returns to
idle screen.
Activate your service.
Enable over-the-air security if you are prompted
to.
2
Getting Started
Locating Your SIM Card
Battery
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
Removing the Battery Door
1 Make sure the phone is powered off. See
“Powering On and Off” on page 6.
2 Slide the release button back until it releases the
battery door.
.
SIM card
release
button
If your SIM card is not in the SIM card holder, it
may be in the box your phone came in, attached to
a piece of plastic about the size of a credit card. If
this is the case, carefully detach your SIM card
from the surrounding plastic and insert it as
described in “Inserting Your SIM Card” on page 15.
If there is no SIM card in your phone or the box,
contact your service provider.
3
Battery
3 Allow the battery door to pop up, slide it forward,
and remove it from the back of your phone.
3 Replace the battery door and press it gently until
you hear a click.
Charging the Battery
Inserting the Battery
Your phone comes with a rapid travel charger.
Your phone comes with a High Performance
Lithium Ion Battery.
1 Plug the charger into an electrical outlet.
1 Remove the battery door.
2 Insert the battery into the battery area. Press the
battery down to secure it.
4
Getting Started
2 Open the connector cover.
Charger Attached or Device Attached appears
on the internal display.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
4 If you have purchased optional batteries or
chargers, see “Charging Times”.
Charging Times
See your battery and charger to determine the
appropriate charging time.
connector
cover
Battery
Charger
Rapid
Mid-Rate
4 hours
3 Plug the other end of the charger into the
accessory connector.
High
Performance
2 hours
Maximum
Capacity
3.5 hours
7.5 hours
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Prolonged charging is not recommended.
5
Activating Service
•
•
Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
Removing the Battery
1 With the phone powered off, remove the battery
door.
2 Remove the battery by pushing it toward the
antenna and lifting it out.
The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Activating Service
The first time you power on your phone, you must
be in your local calling area. This activates your
service.
Powering On and Off
The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
Battery Use and Maintenance
•
The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
To power your phone on:
1 Open the flip.
2 Press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn on
Airplane mode. See “Airplane Mode—
Temporarily Turning Off Calls” on page
132.
•
Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
6
Getting Started
To power your phone off:
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
1 Open the flip.
2 Press and hold p.
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 13.
Press A under Ok.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see “Changing the PIN” on page
13).
Enabling Over-the-Air
Security
If you are set up to receive over-the-air
programming from your service provider, you must
enable security the first time you power on your
phone or within 10 days of first activation of your
phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
7
Phone Programming
5 Press e to return to the idle screen.
Note: If you press A under Later, you will be
prompted to enable security each time
you power on your phone until you press
A under Ok.
Finding Your Phone Number
My Info lets you view your phone number, Private
ID, and other phone information:
2 Press A under Ok.
3 You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
1 Press m to access the main menu.
2 Scroll to My Info.
3 Press O.
4 Press e to return to the idle screen.
4 Scroll to see your information.
Line 1 and Line 2 are your phone numbers.
Private is your Private ID, the number that others
use to contact you using Private service. These
numbers appear when you receive your alert
notification after enabling security on your phone.
See “My Info” on page 102 for more information
about this feature.
Phone Programming
Within 24 hours of enabling security, you may
receive an alert notification containing your Private
ID and Talkgroup lists for Private calls.
To accept programming:
1 When you receive an alert notification saying
New Browser Message - Receive
Programming Info, press O or press A under
Goto.
2 You are prompted to accept changes to your
lists. Press O or press A under Ok.
Phone Basics
Any time your phone is powered on, the display
provides you with information and options.
3 If you are prompted again to accept changes to
your lists, press O or press A under Ok.
4 A confirmation screen displays. Press O or
press A under Ok.
8
Getting Started
The external display shows a shortened version of
Display Options
Two display options appear at the bottom of most
screens. You select a display option by pressing
the option key below it.
the internal display. To see more information, open
the flip.
status icons
text area
Menus and Lists
Your phone’s features are arranged in menus,
submenus, and lists.
menu icon
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
display options
In this guide, this symbol > tells you to select a
menu or list item. For example, Settings >
Security means:
The screen shown is the idle screen. The text that
appears on your idle screen depends on your
service provider. The idle screen appears when
your phone is on, but not engaged in any activity.
1 Scroll to Settings on the main menu.
2 Press O to see the Settings screen.
3 Scroll to Security.
Text Area
This area displays menus, messages, names,
phone numbers, and other information.
4 Press O to see the Security screen.
OK Key
Pressing O:
•
•
Selects the highlighted menu item or list item
Sets options
9
Phone Basics
Create, view, store, edit
Contacts and SDG lists*.
See page 37.
* Selective Dynamic Group Calling
(SDGC) may not be offered by
your service provider.
•
•
Confirms actions
Contacts
d
Places and answer calls
Menu Key
Many features provide context-sensitive menus
that let you access related features and actions.
This icon S appears any time a context-sensitive
menu is available. Press m to access the menu.
Messages
Call Forward
Datebook
Memo
Access messages. See
page 73.
e
f
o
g
h
i
s
j
Set call forwarding options.
See page 47.
Main Menu
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons.
Schedule appointments.
See page 104.
Store a number to access
later. See page 66.
Browser
Browse the Web.
a
q
Call Timers
Recent Calls
Shortcuts
My Info
Phone usage information.
See page 54.
Java Apps
Java applications on your
phone. See page 111.
Lists recent calls. See
page 32.
Settings
Customize your phone.
See page 130.
b
c
Create shortcuts to
screens. See page 142.
VoiceRecord
Record and play audio
messages. See page 127.
View personal phone
information, including
phone number and Private
ID. See page 8.
10
Getting Started
Quick Access to Main Menu Items
Profiles
Groups of settings you
apply together. See
page 137.
p
Each arrow in the navigation key and O can be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when you receive your phone. To
assign different main menu items, see “Personalize
Features” on page 134.
Call Alert
GPS
Lists call alerts. See
page 30.
k
l
Find your approximate
geographical location. See
page 117.
Status Icons
Ring Tones
MOTOtalk
Assign ring tones and turn
ringer off. See page 67.
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
m
M
Launch/Exit MOTOtalk.*
Access MOTOtalk Setup
and Help. See page 24.
* MOTOtalk may not be offered by
your service provider.
Battery Strength — A fuller battery
abcd
efgd
indicates a greater charge.
C
m
Camera
Access camera and take
pictures. See page 82.
Signal Strength — More bars next
to the antenna indicate a stronger
signal.
opqr
s
Media Center
Access stored pictures and
audio recordings. See
page 87.
Phone In Use — Your phone is
active on a phone call.
A
B
C
Quick PTT
Access* any Private IDs
and SDG lists on your
phone. See page 53.
S
Private In Use — Your phone is
active on a Private call.
Talkgroup In Use — Your phone is
active on a group call.
* Quick PTT may not be offered by
your service provider.
11
Phone Basics
SDG Call In Use— Your phone is
Internet — You are ready to
S
DE
U
active on a SDG call.*
browse the internet.
* Selective Dynamic Group Calling (SDGC)
may not be offered by your service provider.
Airplane Mode — Your phone is
set to airplane mode. See
page 132.
Active Phone Line — 1 indicates
phone line 1 is ready to make calls;
2 indicates phone line 2 is ready to
make calls.
1 2
Packet Data — You are ready to
transfer packet data or are
transferring packet data. See
page 55.
Y Z
M
MOTOtalk — Your phone is set to
MOTOtalk* mode.
* MOTOtalk may not be offered by your service
provider.
TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See page 56.
N O
Call Forward — Your phone is set
to forward calls. See page 47.
G J
H K
I L
Roaming — You are using your
phone outside your carrier's
network.
t
Ringer Off — Your phone is set to
QRM
u
Entering Numbers From the Keypad
To enter numbers at the idle screen or any screen
that requires you to enter numbers, press the
numbers on the keypad.
not ring. See page 67.
Speaker Off — Sounds associated
with Private calls and group calls
are set to come through the
earpiece rather than through the
speaker.
If you make a mistake:
•
•
To clear a digit, press A under Delete.
Messages — You have one or
more messages. See page 73.
wxT
yz
To clear all digits, press and hold A under
Delete.
12
Getting Started
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact your
service provider. See “Unblocking the
PIN” on page 14.
•
•
To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
To cancel, press e.
SIM Card Security
1 When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for
each character entered.
Your SIM card protects your personal information.
The SIM card stores all your Contacts information.
Since this information is stored on your SIM card,
not in your phone, you can remove the information
by removing your SIM card.
2 Press A under Ok.
Changing the PIN
1 From the main menu, select Settings >
Security > Change Passwords > SIM PIN.
2 At the Enter Old SIM PIN screen, enter the
current SIM PIN.
3 Press A under Ok.
4 At the Enter New SIM PIN screen, enter the
new 4- to 8-digit SIM PIN.
5 Press A under Ok.
6 At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
7 Press A under Ok.
Note: Except for making emergency calls, your
phone will not function without the SIM
card.
To prevent unauthorized use of your phone, your
SIM card may be protected by a PIN that you enter
each time the phone is powered on. You can
change the PIN or turn off the requirement that it
be entered.
Entering the PIN
You may be required to enter a SIM PIN when you
first use your phone.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card.
13
SIM Card Security
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
your service provider. Except for
making emergency calls, your phone
will not function with a blocked SIM
card.
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency calls.
To unblock the PIN:
When the PIN requirement is off, your phone can
be used without entering a PIN.
1 Press * # m 1.
2 At your service provider representative’s
request, provide the information needed to give
you a PUK code.
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4- to 8-digit SIM PIN.
6 Re-enter your SIM PIN.
1 From the main menu, select Settings >
Security > SIM PIN.
2 Select On or Off.
3 Enter the current SIM PIN.
4 Press A under Ok.
If you entered the codes properly, SIM Unlocked
appears on the display.
Unblocking the PIN
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact your service provider to get a PIN
Unblock Code (PUK).
14
Getting Started
Inserting Your SIM Card
Inserting and Removing Your SIM
Card
1 With your phone powered off, remove the
battery door and battery.
Important: Do not touch the gold-colored areas of
2 Slide the latch away from the SIM card holder.
your SIM card.
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases
other information. If you remove your SIM card and
use it with another phone, or use another SIM card
with your phone, the following information is
erased:
latch
•
•
•
•
The recent calls list
Call forwarding settings
Net alerts
MOSMS drafts, outbox messages, and
customized quick notes
•
•
Information stored in Memo
Pictures and audio recordings in the media
center, except those that are forward locked
•
•
•
•
•
3 most recent GPS Enabled locations
Voice records
Voice names
Datebook events
Options set using the Personalize menu
15
SIM Card Security
3 Open the SIM card holder.
5 Close the SIM card holder.
6 Slide the latch toward the SIM card holder.
4 Carefully slide your SIM card into the SIM card
holder.
Removing Your SIM Card
Important: To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
1 With your phone powered off, remove the
battery door and battery.
16
Getting Started
2 Slide the latch away from the SIM card holder.
4 Carefully slide your SIM card out of the SIM card
holder.
latch
3 Open the SIM card holder.
5 Close the SIM card holder.
6 Slide the latch toward the SIM card holder.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
17
Antenna
Important: Failure to fully extend or retract the
Antenna
The retractable antenna on your i850 phone is
designed to be extended during calls.
antenna until the antenna clicks into
place causes severely degraded
performance, which may result in
missed calls, dropped calls, or garbled
audio.
To extend the antenna, pull gently on the rounded
tip until the antenna is fully extended and clicks into
position.
Accessories
To order accessories, log on to our Web site at
www.motorola.com/store/iden or contact your
Motorola Authorized Retailer.
When finished with a call, retract the antenna by
pushing gently on the rounded tip until the antenna
clicks into place.
To optimize your phone’s performance, extend the
antenna when you make or receive a call, and
avoid touching the antenna with any body part.
For More Information
If you have questions about your i850 phone,
contact your sales representative or your service
provider.
18
With the Flip Closed
Making Calls
Your i850 phone makes two types of calls: digital
cellular phone calls and Private calls. With Private
calls, you use your phone as a long-range, digital
walkie-talkie.
You can make phone calls with the flip closed
using a voice name or the recent calls list to select
Name” on page 21 and “Making Calls From the
Recent Calls List” on page 35.
To end the call, press ..
Phone Calls
Private Calls
1 If the flip is open, enter the Private ID you want
to call. -or-
With the Flip Open
1 Enter the number you want to call.
2 To place the call:
If the flip is closed, choose the number as you
would when making a phone call.
Press s. -or-
If you entered the number from the idle screen,
press O.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 To end the call:
Press e. -or-
3 Release the PTT button to listen.
4 To end the call:
Close the flip.
If the flip is closed, press .. -or-
Press e. -or-
To end a call by closing the flip, you must have the
Flip to End feature turned on (see “Setting Flip
Actions” on page 54).
Press A under Exit. -or-
Close the flip.
A Private call ends automatically if there is no
activity on the call for a few seconds.
19
Receiving Calls
Tip: To let someone know you want to talk to
him or her on a Private call, send a call
alert. See “Call Alerts” on page 30.
Press e. -or-
Press A under No.
Ending
Receiving Calls
If the flip is closed, press .. -or-
Press e. -or-
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Close the flip.
Private Calls
When you receive a Private call, your phone emits
a chirping sound or vibrates.
Answering
If the flip is closed, press t. -or-
Open the flip. -or-
Answering
Press s. -or-
1 Wait for the caller to finish speaking.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
Press O. -or-
Press A under Yes. -or-
Press any number key.
3 Release the PTT button to listen.
To answer a call by opening the flip, you must have
the Flip to Ans feature turned on (see “Setting Flip
Actions” on page 54). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Phone Calls Features” on
page 133).
Ending
If the flip is closed, press .. -or-
Press e. -or-
Press A under Exit. -or-
Close the flip.
Sending to Voice Mail
A Private call ends automatically if there is no
activity on the call for a few seconds.
If the flip is closed, press .. -or-
20
Making Calls
•
76.
Choosing a Number to Call
You can choose the number you want to call in
many ways:
•
•
•
Enter the number on the keypad. See “Entering
Numbers From the Keypad” on page 12.
the number you want to call, say the voice name
into your phone to enter the number. See page 40
for information on voice names.
Say a voice name into your phone. See “Using a
Voice Name”.
Use Speed Dial or Turbo Dial® to make a phone
call. See “Using Speed Dial and Turbo Dial®” on
page 22.
You can use a voice name to enter a number with
the flip open or closed.
1 Press and hold t until a prompt appears telling
•
•
Redial the last phone number called. See
“Redialing the Last Number” on page 22.
you to say the voice name.
2 Speaking into the microphone, say the voice
name assigned to the number you want to call.
Select the number from the recent calls list. See
“Making Calls From the Recent Calls List” on
page 35.
Your phone plays the name back to you.
•
•
Select the number from Contacts. See “Making
Calls From Contacts” on page 45.
Select a number stored in Datebook. See
“Making Calls From Datebook and Datebook
Reminders” on page 108.
3 If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press . if the flip is closed or press e.
If you are making a Private call or a SDG call,
press and hold the PTT button to place the call.
•
•
Use One Touch PTT to make a Private call. See
“One Touch PTT” on page 52.
Use the number in Memo. See “Memo” on page
66.
21
Missed Phone Calls
Using Speed Dial and Turbo Dial®
With the Flip Open
If you want to dismiss the missed call message,
Each phone number stored in Contacts is assigned
a Speed Dial number, which you can use to call
that number.
press A under Back. -or-
If you want to view the missed call on the recent
calls list, press A under View.
Speed Dial
With the Flip Closed
1 From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2 Press #.
3 Press s.
If you want to dismiss the missed call message,
press ..
If you want to view the missed call on the recent
calls list, press . twice.
Turbo Dial
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Redialing the Last Number
Press and hold s to place a call to the last phone
With the Flip Open
number you called.
To turn speakerphone on or off:
Press A under Speaker. -or-
Press t.
Missed Phone Calls
When you miss a call, this icon V and the number
of phone calls you have missed appear briefly.
22
Making Calls
With the Flip Closed
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
117, and particularly “IMPORTANT: Things to
Keep in Mind” on page 117 and “Making an
Emergency Call” on page 119, for more
information on the limitations of this feature.
Because of the limitations of this feature, always
provide your best knowledge of your location to the
emergency response center when you make an
emergency call.
When you make a call with the flip closed,
speakerphone is always on.
Opening the flip turns speakerphone off.
Using Mute
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
Important: Emergency calls cannot be placed while
the keypad is locked.
To turn mute off:
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
Press A under Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
23
Receiving Call Alerts
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Private calls until you do.
Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on a Private call.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Private ID.
To answer a call alert:
Press the PTT button to make a Private call to
the sender.
The recipient can:
To queue a call alert:
Press A under Queue.
To clear a call alert:
•
•
Answer — begin a Private call with the sender
Queue — store the call alert to the call alert
queue, which is a list of call alerts
•
Clear — dismiss and delete the call alert
Press O. -or-
Press A under Clear. -or-
If the flip is closed, press ..
Sending Call Alerts
1 Enter the Private ID you want to send to, as you
would when making a Private call.
2 Press A under Alert. Ready to Alert appears
on the display.
3 Press the PTT button until Alert Successful
appears on the display.
Note: The recent calls list also stores call alerts
you have received. They appear as
Private calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
Note: If the alert is not successful, the person
you are trying to reach is on a call or has
the phone turned off.
Using the Call Alert Queue
When you queue a call alert, it remains in the call
alert queue until you make a Private call to the
sender or delete it.
30
Call Alerts
4 Press the PTT button until Alert Successful
appears on the display.
Viewing Call Alerts
1 From the main menu, select Call Alert.
2 Scroll through the list.
Deleting Call Alerts
To delete a call alert from the queue:
Viewing Date and Time
To view the date and time a call alert was received:
1 From the call alert queue, scroll to the call alert
you want to delete.
2 Press m.
3 Select Delete.
1 From the main menu, select Call Alert.
2 Select the call alert you want information on.
4 Press O or press A under Yes to confirm.
Responding to Call Alerts in the
Queue
To delete all call alerts from the queue:
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
3 Press O or press A under Yes to confirm.
After you queue a call alert, you can respond to it
by making a Private call to the sender or sending a
call alert to the sender.
Making a Private Call to the Sender
Sorting Call Alerts
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press the PTT button to begin the call.
Tip: You must have at least one call alert in the
queue to access this feature.
To sort call alerts by the order they were received:
This removes the call alert from the queue.
1 From the main menu, select Call Alert.
2 Press m.
3 Select Sort By.
Sending a Call Alert to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press A under Alert. Ready to Alert appears
on the display.
4 Select First on Top or Last on Top.
31
The Private ID Contacts type icon appears when
you receive a Private call or call alert, even if the
number is not stored in Contacts.
Recent Calls
The recent calls list displays information
associated with calls you have made and received
and call alerts you have received. It also displays
My Info and contact information sent to you from
other phones.
Call alerts you have received appear as Private
calls. Like all items in the recent calls list, they
reach the end of the list.
The recent calls list displays up to 20 items.
For phone calls, an additional icon appears giving
information about the call:
Calls and Call Alerts
The recent calls list contains the numbers of up to
20 of the most recent calls you have made and
received.
A call you made.
X
W
V
A call you received.
A missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
If the number of a recent call is stored in Contacts,
the following information appears:
•
•
The name assigned to the number
When you select a call to view its details, you see
information such as the name associated with the
call, the number, date, time, and duration of the
call.
The picture assigned to the number, if your
phone is set to show pictures on the recent calls
list. See “Choosing Picture View or List View” on
page 34. Pictures appear for phone calls only.
My Info From Other Phones
•
The Contacts type icon associated with the
number. If the Contacts entry containing the
number has more than one number or address
stored, <> surrounds the Contacts type icon. For
information on Contacts types, see page 37.
Note: This feature may not be offered by your
service provider.
The recent calls list displays My Info from other
phones. See “Sending My Info and Contact
Information” on page 99.
32
Recent Calls
•
The Contacts type icon associated with the
number or address contained in the contact
information. If the item contains more than one
number or address stored, <> surrounds the
Contacts type icon.
This icon j appears with My Info from other
phones on the recent calls list, along with the
Private ID of the person who sent the information.
When you select My Info from other phones to view
its details, you see all the information sent.
contact information appears as a separate item on
the recent calls list, above the information sent. If
one person sends you more than one item of
contact information, all the items appear below the
person’s name or Private ID.
If you receive My Info from the same phone more
than once, only the most recently sent version
appears in the recent calls list.
Contact Information From
Other Phones
When you select contact information to view its
details, you see the name or Private ID of the
person who sent the information and all the
information in the item.
Note: This feature may not be offered by your
service provider.
The recent calls list displays contact information
sent from other phones. This information comes
from the other phone’s Contacts list or recent calls
list. See “Sending My Info and Contact Information”
on page 99.
If you receive contact information with the same
name from the same phone more than once, only
the most recently sent version appears in the
recent calls list.
Viewing the Recent Calls List
With the Flip Open
This icon d appears with contact information on
the recent calls list.
Contact information in the recent calls list displays:
1 From the main menu, select Recent Calls.
2 Scroll through the list.
•
The name contained in the contact information
33
Storing Items to Contacts
2 Press A under Store. -or-
To view the details of an item on the list:
From the recent calls list, select the item you
want information on.
If Store is not one of your options: Press m.
Select Store or Update Contacts.
Tip: To view the details of more items, keep
Tip: If the item you want to store is a call, Store
does not appear if the number is already
stored in Contacts.
scrolling.
With the Flip Closed
3 To store the item as a new entry, select [New
Contact]. -or-
1 Press ..
2 If you want to view the rest of the recent calls
list, press the volume controls.
To store the number to an existing entry, select
the entry.
3 Press . to dismiss the recent calls list.
Note: Storing My Info or contact information
from another phone to a Contacts entry
that has a name assigned to it does not
change the name of the Contacts entry.
Choosing Picture View or List View
You can set your phone to show the picture
associated with each item as you view the recent
calls list or show the list without pictures.
4 If the item you want to store is a call, you must
assign a Contacts type to the number:
1 From the recent calls list, press m.
With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
2 Select Recent Calls View.
3 Select List View to show the recent calls list
without pictures. -or-
5 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 38.
Select Picture View to show the picture
associated with each entry.
6 Press A under Save.
Storing Items to Contacts
1 From the recent calls list, scroll to or select the
item you want to store.
34
Storing Numbers Faster
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures
cannot be assigned.
3 If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select
[No Picture] or press A under Unassign.
4 When you are finished, press A under Back.
4 When you are finished, press A under Back.
Storing Numbers Faster
To store numbers to Contacts from the recent calls
list, see “Storing Items to Contacts” on page 34.
Assigning a Speed Dial Number or
Voice Name
1 If you have not already, select [Options].
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
To store numbers to Contacts from Memo, see
“Memo” on page 66.
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press O.
3 Select Store Number.
4 To store the number as a new entry, select [New
Contact]. -or-
Press A under Delete to delete the current
Speed Dial number.
To store the number to an existing entry, select
the entry.
Enter the new Speed Dial number using the
keypad.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
When you are finished, press O.
40
Contacts
6 If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 38.
•
•
A small version of the picture assigned to the
entry, if you have set Contacts to show pictures
in the Contacts list. See “Choosing Picture View
or List View” on page 42.
7 Press A under Done.
The types of numbers and addresses stored in
the entry
Editing Entries
1 From the Contacts list, scroll to or select the
entry you want to edit.
To view entries from the Contacts list:
1 Access Contacts.
2 Scroll to view entries.
2 Press A under Edit. -or-
If Edit is not one of your options: Press m.
Select Edit.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
The entry details screen displays.
3 If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
3 Follow the applicable instructions in “Creating
Entries” on page 38 to edit the various fields.
Viewing Entries
When you view Contacts entries, you can choose
how much detail you want to see.
Selecting an Entry
In this view, each entry shows:
•
•
The name assigned to the entry
Viewing the Contacts List
In this view, each entry shows:
A small version of the picture assigned to the
entry
•
•
The name of the ring tone assigned to the entry
The numbers and addresses stored in the entry
•
The name assigned to the entry
41
Viewing Entries
To select an entry:
Viewing a Large Picture
1 From the Contacts list, select the entry you want
to view.
To view a large version of the picture assigned to
an entry:
2 Scroll to view the numbers and addresses
1 Select the entry.
stored in the entry.
2 Select the first item shown on the entry screen.
This item shows the name assigned to the entry
or No Name.
Tip: To select other entries: Scroll left or right.
Or, press # or *.
To return to the Contacts list, press A under Back.
Note: You cannot make calls from this view.
To return to the entry, press A under Back or
press O.
Viewing More Details
When an entry is selected, you can view more
details about the entry by selecting items within the
entry.
Choosing Picture View or List View
You can set Contacts to show the picture assigned
to each entry as you view the Contacts list or show
the Contacts list without pictures.
Viewing Details of a Number or Address
1 Select the entry.
2 Select the number or address you want to view
details of.
1 From the Contacts list, press m.
2 Select Contacts View.
3 Select List View to show the Contacts list
If you select a phone number, you can view its
Speed Dial number and see whether it has a
voice name.
without pictures. -or-
Select Picture View to show the picture
assigned to each entry.
To return to the entry, press A under Back or
press O.
42
Contacts
Searching for a Name
To search for a name in Contacts:
Deleting Entries
Delete an Entry
1 From the Contacts list, scroll to or select the
entry you want to delete.
1 From the Contacts list, press A under Search.
-or-
If Search is not one of your options: Press m.
Select Search.
2 Press m.
3 To delete the entire entry, select Delete Contact
or Delete SDG List.
4 Press O or press A under Yes to confirm.
2 Enter the name you want to see. See “Entering
Text” on page 70.
3 Press O.
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 Scroll left or right to display the Contacts type for
the number you want to delete. -or-
Your phone finds the name you entered or the
nearest match.
Showing Only Private IDs, SDG Lists,
and Talkgroups
To set Contacts to show only entries that contain
Private IDs, SDG lists, and Talkgroup entries:
Select the entry. Scroll to or select the number
you want to delete.
1 From the Contacts list, press m.
2 Select Filter.
3 Press m.
4 Select Delete Number.
5 Press O or press A under Yes to confirm.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show All.
43
Checking Capacity
To program a wait:
Checking Capacity
To see how many numbers are stored in Contacts:
Press and hold * until the letter W appears. The
W means your phone waits before dialing
further.
1 From the Contacts list, press m.
2 Select Capacity.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Creating Pauses and Waits
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 52.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
International Numbers
Note: This feature may not be offered by your
service provider.
To program a pause:
When storing a number that you plan to use for
international calls, use Plus Dialing:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
1 Press and hold 0 for two seconds. A “0”
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
2 Enter the country code, city code or area code,
and phone number.
44
Contacts
For information about making international calls,
see “Making International Calls” on page 52.
•
If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
Making Calls From Contacts
While Viewing the Contacts List
1 Access Contacts.
2 Scroll to the name or number you want to call.
After Selecting an Entry
1 Access Contacts.
2 Select the Contacts entry that contains the
number you want to call.
3 Scroll to or select number you want to call.
4 To make a phone call, press s. -or-
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3 To place the call now, go to step 4. -or-
Scroll left or right to display the Contacts type for
the number you want to call.
To make a Private call, press the PTT button.
If you try to make a type of call that does not match
the Contacts type of the number you chose, no call
is placed.
4 To make a phone call, press s. -or-
To make a Private call, press the PTT button.
If you are making a Private call, your phone places
the call to the Private ID stored in the Contacts
entry, even if the Private icon is not displayed.
Accessing Contacts with GSM
Phones
If you plan to use the information stored in
Contacts with an i2000, i2000plus, or any other
GSM phone, download iDEN Phonebook Manager.
If you are making a phone call:
•
Your phone places the call to the phone number
assigned to the Contacts type displayed.
Go to idenphones.motorola.com/iden/support for
more information.
•
If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
45
Phone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
K
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call.
To forward all calls:
1 From the main menu, select Call Forward >
Forward > All Calls.
2 Select To.
You can forward phone lines 1 and 2
independently.
If you specified a forwarding number for all calls
before, this number displays.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
To forward calls to this number, press A under
Back.
To delete this number, press O, then press and
hold A under Delete.
Phone line 1 is active; calls to phone line 1
are being forwarded.
G
I
H
J
L
3 To enter the number you want to forward calls to:
Enter the number using your keypad. -or-
Phone line 1 is active; calls to phone line 2
are being forwarded.
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Phone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
4 Press O.
Phone line 2 is active; calls to phone line 1
are being forwarded.
All your calls are now forwarded to the number
you specified.
Phone line 2 is active; calls to phone line 2
are being forwarded.
47
Turning Off Call Forwarding
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your
voice mail access number.
Turning Off Call Forwarding
If you do not want all your calls forwarded, turn the
feature off:
1 From the main menu, select Call Forward > To.
To forward missed calls:
2 Set this option to Off.
1 From the main menu, select Call Forward >
Forward > Detailed.
All your calls are now sent to your phone.
2 Select If Busy to specify a forwarding number
for calls received when your phone is busy.
3 If you specified a forwarding number for this type
of call before, this number displays.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
To forward calls to this number, press B under
Back and go to step 6. -or-
To delete this number, press O, then press and
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
hold A under Delete.
4 To enter the number you want to forward this
type of call to:
Enter the number using your keypad. -or-
•
•
•
If Busy — Your phone is on a call or transferring
data.
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
If No Answer — You do not answer on the first
4 rings.
If Unreachable — Your phone is out of
coverage or powered off.
5 Press O.
6 Repeat step 2 through step 5 for If No Answer
and If Unreachable.
7 When you are finished, press A under Back.
48
Turn Off Call Waiting
To turn off Call Waiting during a call:
Advanced Calling
Features
1 Press m.
2 Select In Call Setup > Call Waiting.
3 Set this option to Off.
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
Tip: To turn Call Waiting back on while still on
the call, set this option to On.
To turn off Call Waiting for the next call you make
or receive:
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
1 From the main menu, select Settings > Phone
Calls > Call Waiting.
2 Set this option to Off.
To accept the second call and put the active call on
hold:
Call Waiting is turned back on when you end the
call.
Press A under Yes.
To accept the second call and end the active call:
1 Press e.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Your phone rings with the second call.
2 Answer the second call.
To decline the second call:
Press A under Switch. -or-
Press A under No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
If Switch is not one of your options: Press m.
Select Switch.
50
Advanced Calling Features
Merging 2 Calls into a 3-Way Call
After you put a call on hold and place a second
call, you can combine these calls into a 3-way call:
Putting a Call on Hold
1 While on an active call, press m.
2 Select Hold.
1 Press m.
2 Select Join.
If you want to make the call active again, press A
under Resume.
All 3 people in the call can speak to and hear each
other.
Calling 2 People
Making a 3-Way Call
1 Place or receive a phone call.
Putting a Call on Hold, Making a
Second Call
2 While the call is active, press m.
3 Select 3 Way. This puts the call on hold.
4 Enter the second phone number you want to
call.
1 Place or receive a phone call.
2 While the call is active, press m.
3 Select 2nd Call. This puts the call on hold.
4 Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
Tip: For quick ways to enter the number, press
m.
5 Press s to place the call.
6 Press A under Join.
5 Press s to place the call.
All 3 people in the call can speak to and hear each
other.
To end the second call and make the call on hold
active again:
Press e.
To make the call on hold active and put the active
call on hold:
Press A under Switch.
51
Creating Pauses and Waits While Dialing
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For information on using pauses and
waits, see “Creating Pauses and Waits” on page
44.
Making International Calls
Note: This feature may not be offered by your
service provider.
Plus Dialing lets you place an international call to
most countries without entering the local
To create a pause while dialing a phone number:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
1 From the keypad, enter the digits you want to
occur before the pause.
2 Press m.
3 Select Insert Pause.
4 Enter the digits you want to occur after the
pause.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
To create a wait while dialing a phone number:
One Touch PTT
One Touch PTT sets your phone to call the most
recent Private ID or SDG list on the recent calls list,
or a Private ID you choose, every time you press
the PTT button.
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.
Setting One Touch PTT
To the Most Recent Private ID or SDG List
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2 Set this option to Last Call.
52
Advanced Calling Features
To A Private ID
Quick PTT lets you quickly access any Private IDs
on your phone so that you can make a Private call,
or create a SDG list and make a SDG call. For
more information about SDG lists, see “Selective
Dynamic Group (SDG) Calls” on page 61.
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT > Assigned Number.
2 To enter the Private ID you want your phone to
call every time you press the PTT button:
To view a list of Contacts and SDG lists with
Private IDs in Contacts:
Enter the number using your keypad. -or-
Press A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
1 From the idle screen, press m.
2 Select Quick PTT.
To move between Contacts, the recent calls list,
and Memo:
Tip: If you are entering a Talkgroup number,
enter # before the number.
Scroll left or right. -or-
Press * or #.
3 Press O.
Turning Off One Touch PTT
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
To make a Private call or SDG call:
1 Select the entries you want.
2 Press A under Done.
3 Press the PTT button.
2 Set this option to Off.
Quick PTT
To save your selections as a SDG list:
Note: This feature may not be offered by your
1 Press m.
2 Select Store SDG.
service provider.
3 If you want to assign a name to the SDG list,
enter the name.
53
Setting Flip Actions
Note: If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for a SDG list with 8 members.
To set your phone not to end calls when you close
the flip:
Set Flip to End to Off in step 2.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call.
4 Press O.
Setting Flip Actions
For Answering Calls
Call Timers
Call timers measure the duration of your phone
calls, Private or group calls, and circuit data use,
as well as the number of Kilobytes sent and
received by your phone:
To set your phone to answer calls when you open
the flip:
1 From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to Ans.
2 Set this option to On.
•
•
•
•
Last Call — displays the duration of your most
To set your phone not to answer calls when you
open the flip:
recent phone call.
Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
Set Flip to Ans to Off in step 2.
For Ending Calls
To set your phone to end calls when you close the
flip:
Phone Lifetime — displays the total minutes of
all your phone calls.
Prvt/Grp Reset — keeps a running total of all of
your Private and group call minutes, until you
reset it.
1 From the main menu, select Settings > Phone
Calls > Flip Activation > Flip to End.
2 Set this option to On.
•
Prvt/Grp Lifetime — displays the total minutes
of all your Private and group calls.
54
Advanced Calling Features
•
•
•
Circuit Reset — keeps a running total of all of
Using Your Phone as a Modem
your circuit data use, until you reset it.
Note: This feature may not be offered by your
Circuit Lifetime — displays the total minutes of
all of your circuit data use.
service provider.
To use your phone as a modem with a laptop,
handheld device, or desktop computer:
Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
1 Open the connector cover.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press O
when you are finished viewing. -or-
To reset a feature: Press A under Reset. Press
O or press A under Yes to confirm.
connector
cover
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
55
Making TTY Calls
2 With the phone’s display facing up, insert a data
cable’s connector into the accessory connector,
until you hear a click.
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i850 phone for packet and
circuit data calls, refer to the Wireless Data
Services User’s Guide or contact your service
provider.
Making TTY Calls
Note: This feature may not be offered by your
service provider.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
1 Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
end of the cable to your TTY device.
2 Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3 Insert the data plug into the data port of the other
device.
When used as a modem, your phone has these
data transfer modes:
3 Use your phone to enter phone numbers and
make calls.
•
Circuit data — used for sending and receiving
faxes and for transferring large files
•
Packet data — used for small file transfers such
as email
When you make a TTY call, these icons appear on
the phone’s display:
Phone call is active.
Phone call is on hold.
N
O
56
Advanced Calling Features
TTY device features such as Turbo-Code,
When you make a TTY call, the call begins in the
TTY mode you last selected.
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
To change mode during a call using your phone:
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
Turning On the TTY Feature
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
To change mode during a call using your TTY
device, issue one of the following commands:
•
•
•
“VCO please” — to select VCO mode
“HCO please” — to select HCO mode
“HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 130.)
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
•
•
•
TTY — You type and read text on your TTY
device.
VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
Changing the TTY Baud Rate
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTY baud rate to 50.00.
To change mode while not in a call:
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Select the TTY mode you want.
57
Making TTY Calls
To change the TTY baud rate:
1 From the main menu, select Settings > Phone
Calls > TTY > Baud.
2 Select the baud rate for your location.
58
Group Calls and Selective Dynamic Group Calls
Group Calls and
Selective Dynamic
Group Calls
Note: Selective Dynamic Group Calling (SDGC)
may not be offered by your service
provider.
Group Calls
SDG Calls
Set-up
Predefined, via Dynamically,
your service
provider
administrator
using Group
Management
via your phone
Your phone gives you 2 ways to call more than one
Private ID at once:
Group Names
SDG lists S
Talkgroups I
Voice
Activated
Dialing
No
Yes
•
•
Group calls — calls to a Talkgroup
Selective Dynamic Group calls — calls to a SDG
list
Note: In order to store SDG lists to your i850,
you must use a SDG-capable SIM card.
For more information about SDG-capable
SIM cards, contact your service provider.
SDG lists created with your i850 phone
are not readable by an older iDEN
SIM-based phone.
Group Calls
A group call is similar to a Private call, but is made
to all members of a Talkgroup at once. A Talkgroup
is a predetermined group of your service provider’s
customers.
Before you can make or receive group calls, a
Talkgroup must be established. After the Talkgroup
is established, you must join the Talkgroup.
59
Group Calls
The Private ID or name of the person who is
Joining a Talkgroup
speaking will appear on the display below the
Talkgroup number.
Your sales representative or your service provider
establishes Talkgroups for you and assigns each
Talkgroup a Talkgroup number. You can choose a
name for each of your Talkgroups when you create
entries for them in Contacts.
Turning off Group Calls
To set your phone to prevent you from hearing
group calls to your Talkgroup:
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1 From the main menu, select Settings > 2-Way
Radio > Tkgrp Silent.
2 Set this option On.
1 From the main menu, select Contacts.
2 Scroll to the Talkgroup you want to join.
3 Press A under Join.
To set your phone to let you hear group calls to
your Talkgroup:
Note: You can only monitor one Talkgroup at a
Set Tkgrp Silent to Off in step 2.
time.
Making Group Calls
1 Press #. Then enter the Talkgroup number
using the keypad. -or-
Choose the Talkgroup name from Contacts or
recent calls list.
2 Proceed as if making a Private call.
Receiving Group Calls
To answer a group call:
Proceed as if answering a Private call. Only one
person at a time may speak on a group call.
60
Group Calls and Selective Dynamic Group Calls
Note: If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for a SDG list with 8 members.
Selective Dynamic Group
(SDG) Calls
Note: This feature may not be offered by your
service provider.
4 Add Private IDs. See “Adding Private Numbers”.
5 If you want to create a voice name for the SDG
list, select [Options] > Voice Name. As directed
by the screen prompts, say and repeat the voice
name you want to assign to the SDG list. Speak
clearly into the microphone.
A SDG call is similar to a Private call, but is made
to all members of a SDG list at once. A SDG list is
a group of Private IDs that you create using your
phone. A SDG list must contain at least 2 members
and can contain up to 20 members.
6 Press A under Save.
You can create a SDG list for one call only or store
it to Contacts so you can call it any time.
Adding Private Numbers
You can use Send via PTT* to send SDG lists to
other phones that have this capability.
You can add Private IDs to a SDG list by selecting
them from Contacts, the recent calls list, or memo.
You can add all members in an existing SDG list by
selecting the list.
* Send via PTT may not be offered by your service provider.
Creating SDG Lists in Contacts
1 From the main menu, select Contacts.
2 Select [New SDG List].
You can select more than one member from
Contacts and the recent calls list. A checkmark
appears next to each selected item.
Note: You can also create a SDG list by
selecting [New Contact] and assigning
the SDG contact type.
Tip: To deselect an item: Scroll to a selected
item and press O.
You can also enter Private IDs from the keypad.
3 If you want to assign a name to the SDG list,
enter the name.
61
Selective Dynamic Group (SDG) Calls
2 Press A under Edit.
3 Scroll to the member you want to remove.
4 Press m.
To add members from Contacts, the recent calls
list, or Memo:
1 While creating a SDG list, select [Add Member].
-or-
2 Select [Add Number] and press A under
Browse.
5 Select Remove Member.
6 Select Save.
To remove all members from a SDG list:
Note: To move between Contacts, the recent
calls list, and Memo, scroll left or right, or
press * or #.
1 From Contacts, scroll to the SDG list you want to
delete the member from.
2 Press A under Edit.
3 Press m.
4 Select Remove All Members.
5 Press A under Yes.
3 Scroll to the members you want from Contacts,
the recent calls list, or Memo and press O. A
checkmark appears next to each selected
member.
Note: To deselect a member, scroll to a selected
To delete a SDG list from Contacts:
member and press O.
1 Scroll to the SDG list you want to delete.
2 Press m.
3 Select Delete SDG List.
4 Press A under Done.
To add members manually from the keypad:
1 While creating a SDG list, select [Add Number].
2 Enter the Private number using the keypad.
3 Press O.
Storing SDG Lists Faster
From the Recent Calls List
1 From the recent calls list, select the SDG list you
Removing Members or SDG Lists
To remove a member from a SDG list:
want.
2 Press A under Store.
1 From Contacts, scroll to the SDG list you want to
delete the member from.
3 If you want, add more information to the entry.
4 Press A under Save.
62
Group Calls and Selective Dynamic Group Calls
From an Active SDG Call
With the Flip Closed
1 During an active SDG call, press m.
2 Select Store SDG.
To make a SDG call from the recent calls list with
the flip closed:
3 If you want, add more information to the entry.
1 Press .. Press the volume controls to scroll to
the SDG list you want. -or-
Note: You cannot record a voice name during an
active call.
Press and hold t until a prompt appears
telling you to say the voice name. Say the voice
name assigned to the SDG list you want.
4 Press A under Save.
Making SDG Calls
2 Press the PTT button.
With the Flip Open
Starting a SDG Call with a Private ID
You can start a SDG call with any Private ID you
want to call.
1 From Contacts or the recent calls list, scroll to or
select the SDG list you want. -or-
Press and hold t until a prompt appears telling
you to say the voice name. Say the voice name
assigned to the SDG list you want. -or-
1 Choose the first Private ID that you want in the
SDG call:
From the idle screen, enter the Private ID. -or-
From the idle screen, press the number on your
keypad for the shortcut you assigned to the SDG
list you want. -or-
From the Contacts list, scroll to an entry
containing the Private ID. -or-
Enter or select a Private ID and add more
Private IDs. See “Starting a SDG Call with a
Private ID”.
From recent calls list, scroll to an entry
containing the Private ID.
2 Press m.
3 Select Call New SDG.
2 Press the PTT button.
4 Add more Private IDs. See “Adding Private
Numbers” on page 61.
63
Selective Dynamic Group (SDG) Calls
5 If you want to save the SDG list you have
created: Press m. Select Store SDG. -or-
In the SDG Call Details view, these icons appear
next to member names or Private IDs:
If you do not want to save the SDG list, press A
under Done.
The member of the SDG list who is speaking.
T
A
6 To make the call, press the PTT button.
A member of the SDG list who is active on the
SDG call, but not speaking.
Receiving SDG Calls
To answer a SDG call:
A member of the SDG list who has exited the
call.
O
U
u
Proceed as if answering a Private call. Only one
person at a time may speak on a SDG call.
A member of the SDG list who could not be
reached on the SDG call.
SDG Call Information
While you are in a SDG call, the following appears
on the screen:
A member of the SDG list whose status is
unknown.
Sending SDG Lists Using Send via
PTT
•
•
The name of the SDG list
The name or the Private ID of the person
speaking
Note: Send via PTT may not be offered by your
service provider.
•
The number of participants in the SDG call
You can send a SDG list using Send via PTT so
that the person who receives the SDG list can use
the list.
SDG Call Details
During a SDG call, you can view details about the
other SDG list members, such as their name or
Private ID, and their status on the call.
1 From Contacts or the recent calls list, scroll to or
select the SDG list you want. -or-
From the idle screen, press the number on your
keypad for the shortcut you assigned to the SDG
list you want.
To view SDG call details, press A under Details.
64
Group Calls and Selective Dynamic Group Calls
2 Press m.
3 Select Send SDG via PTT.
4 To include yourself in the list, press A under
Yes. -or-
To exclude yourself from the list, press A under
No.
Note: If you choose to include yourself and the
list already contains 20 members, you will
be prompted that the list is full. You will be
excluded from the list.
5 Enter the Private ID of the person you want to
send the SDG list to. -or-
Select Browse to select a contact from
Contacts, the recent calls list, or Memo.
6 Press O.
7 To send the SDG list, push the PTT button.
The SDG list will display in the recent calls list
on the phone that you send the SDG list to.
65
To store the memo number to Contacts:
Memo
1 From the main menu, select Memo.
2 Press m.
3 Select Store to Contacts.
4 To store the number as a new entry, select [New
Contact]. -or-
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press O.
To store the number to an existing entry, select
the entry.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
To view the memo later:
From the main menu, select Memo.
To delete the memo:
6 Press A under Save.
1 From the main menu, select Memo.
2 Press and hold A under Delete.
3 Press O.
To edit the memo:
1 From the main menu, select Memo.
2 Enter the new number.
3 Press O.
To make a call to the memo number:
1 From the main menu, select Memo.
2 To make a phone call, press s. -or-
To make a Private call, press the PTT button.
66
1 From the main menu, select Ring Tones >
Ring Tones
To set the ring tone your phone makes when you
receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT, or
Datebook reminders:
VibeAll.
2 Set this option to On.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets VibeAll
to On.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
Note: You must press the volume up key twice
from VibeAll in order to restore ring tone.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
To set your phone to vibrate instead of making a
sound for some features but not others:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Select Vibrate from the list of ring tones.
4 Select the features you want to set to make no
sound.
Tip: Highlighting a ring tone lets you hear it.
4 Select the features you want to assign the ring
tone to.
5 When you are finished, press A under Done.
5 When you are finished, press A under Done.
Note: This icon Mappears on the display if you
set your phone to neither vibrate nor make
a sound for phone calls.
Note: To set ring options for Private calls, group
calls, and SDG calls, see “Setting Your
Phone to Vibrate” on page 130.
Setting Your Phone to Vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
Private calls, group calls, SDG calls, call alerts,
messages notifications, pictures sent using Send
via PTT, and Datebook reminders.
67
Ring and Vibrate
These icons indicate how the ringer is set.
Assigning Ring Tones to
Contacts
Q
R
u
The phone always vibrates instead of making
a sound.
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
The phone vibrates instead of making a
sound for phone calls.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign.
Private calls, group calls, and SDG calls are
heard through the earpiece, not the speaker.
These icons may appear at the same time.
4 Select A Contact.
5 Select the Contacts entry you want to assign the
ring tone to.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
Viewing Ring Tone
Assignments
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Highlight any ring tone.
4 Press m.
3 Scroll through the list of ring tones and highlight
the one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the features you want to set to ring and
5 Select Overview.
6 Scroll to view ring tones assigned to features
and Contact entries.
vibrate.
7 When you are finished, press A under Done.
This icon Sappears on the display.
68
Ring Tones
Deleting custom ring tones frees memory.
Downloading More Ring
Tones
If you want to use other ring tones, you can
download them into your phone for a fee. For more
information about custom ring tones and
downloading instructions, please contact your
service provider.
Note: Ring tones are stored in your phone using
the same memory space used to store
messages, voice records, Java
application data, pictures, and wallpaper
images. Deleting some of these other
items frees memory for ring tones.
Deleting Custom Ring Tones
Deleting a ring tone from the list of ring tones
deletes it from all parts of your phone, including the
media center and Contacts.
About DRM Ring Tones
Your phone supports gifting and Tell-A-Friend
services for DRM ring tones. However, these
services may not be offered by your service
provider. Please contact your service provider for
more information about these services.
Except for DRM ring tones, if you delete a ring tone
that you purchased from your phone, you will have
to purchase it again. Under certain conditions,
some DRM vendors will not charge you if you
download an item multiple times within a given time
frame. Please contact the DRM vendor to learn
more about their download regulations.
For more information about DRM items, see
“Digital Rights Management” on page 93.
Managing Memory
To view the amount of memory available for
custom ring tones:
To delete a custom ring tone:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll to the ring tone you want to delete.
4 Press m.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Highlight any ring tone.
5 Select Delete.
4 Press m.
6 Press A under Yes to confirm.
5 Select Memory Usage.
69
Using Word Mode
Entering Text
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add your own words to this
database.
You can enter text, numbers, and symbols into
your phone using Alpha, Word, Numeric, or
Symbol text input modes.
Alpha — Press a key several times for each
l
j
character.
Word — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
Entering a Word
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
Symbols — Enter punctuation and other
i
k
symbols.
For example, to type “test” press 8 3 7 8.
Numeric — Enter numbers.
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
When you access a screen that requires you to
enter text, you start in the mode last used.
3 If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
To choose a text input mode:
1 At a screen that requires you to enter text, press
m.
Repeat until the desired word appears.
2 Select the text input mode you want to use. A
checkmark appears next to the current mode.
If the desired word does not appear, you can add it
to the database.
70
Entering Text
Adding Words to the Database
Capitalization
1 Select Alpha as your text input mode.
2 Type the word using Alpha mode.
3 Select Word as your text input mode.
4 Press #.
When you press and hold the # key, it acts as a
3-way toggle. Press and hold # to make the next
letter typed uppercase (shift), to make all
subsequent letters typed uppercase (caps lock), or
to go back to lowercase letters.
The word you typed in Alpha text entry mode is
now in the database.
These icons appear in the top row of your display:
Note: You cannot store alphanumeric
Shift is on.
mor X
combinations, such as Y2K.
Caps lock is on.
nor W
Choosing a Language
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
To change the language of the database:
1 At a screen that requires you to enter text, press
m.
2 Select Languages.
3 Select the language you want for your database.
Note: When creating a text message, you
cannot capitalize by scrolling up.
Your phone automatically makes the first letter of a
sentence uppercase.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Spaces
Press # for a space.
71
Special Function Keys
Note: Additional punctuation symbols are
available in Symbols mode.
72
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
Messages
You can receive the following types of messages
on your phone:
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
•
•
•
Voice mail messages
Short Message Service (SMS) text messages
Depending on your service provider, you may
have the option to receive fax mail and Net
alerts.
Setting Notification Options
To control whether your phone sounds message
notification tones while you are on phone calls:
You have 2 ways to access the messages you
receive:
1 From the main menu, select Settings > Phone
Calls > Notifications.
•
Respond to the message notification that
appears when the message is received.
2 Select the option you want:
•
Dismiss the message notification and access
the message later through the message center.
•
Receive All — Tones sound during calls for
all types of messages.
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
•
Message Mail Only — Tones sound during
calls for SMS messages; tones for all other
types of messages are held until you end
calls.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone
or vibration. You can access the message or
dismiss the notification.
•
Delay All — Tones for all types of messages
are held until you end calls.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
73
Message Center
Message Center
The message center manages your messages.
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1 From the main menu, select Messages.
2 Scroll to the type of message you want to
access.
3 Press O or press A under the display option on
the left.
74
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
Voice Mail Messages
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
If the flip is closed, press .. -or-
Press e. -or-
Receiving a Message
When you receive a voice mail message, New
Voice Mail Message appears on the display.
Press A under No.
To call your service provider’s voice mail system
and listen to the message:
Press A under Call.
To dismiss the message notification:
If the flip is closed, press .. -or-
If the flip is open, press O or press A under
Back, or close the flip.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Accessing Voice Mail from
the Message Center
From the main menu, select Messages > Voice
Mail.
75
When you are finished, press O.
MOSMS Messages
7 Select Expire After.
Note: This feature may not be offered by your
This is the amount of time messages you send
are saved at the service center if they cannot be
delivered. After this period, they are discarded.
service provider.
If your service provider offers MOSMS, your phone
sends SMS messages using MOSMS and receives
SMS messages from other phones that are using
MOSMS.
Scroll to select the number of days you want
your messages to be saved.
When you are finished, press O.
Setting Up
Before you begin using MOSMS, you may need to
set up your signature, service center number, and
expiration information:
8 Select Auto Clean Up. Set this option to On if
you want your phone to delete sent messages.
If you set Auto Clean Up to On, select Clean
Up After to set the number of days after which
sent messages are deleted or the number of
messages to be kept.
1 From the main menu, select Messages.
2 Scroll to Text Inbox.
3 Press m.
4 Select Text Msg Setup.
5 Select Signature.
9 Press A under Done to save the information
you entered.
Receiving a Message
To view the message:
Enter your signature. It may be up to 11
characters long. When you are finished, press
O.
Press A under Read.
6 Select Srvc Cntr No.
To dismiss the message notification:
If the flip is closed, press .. -or-
Enter the phone number of your service center.
If you do not know this number, contact your
service provider.
If the flip is open, press A under Back or close
the flip.
76
MOSMS Messages
If your phone is powered off when you receive a
text message, your phone notifies you the next
time you power it on. If you are out of your
coverage area, your phone alerts you when you
return to your coverage area.
storing the sender’s number in Contacts, press
m.
Creating and Sending
Messages
1 From the main menu, select Messages >
[Create Message]. -or-
Tip: While reading a text and numeric message
that contains a phone number, you can
press s to call that number.
Select [Create Message] from Text Inbox, Text
Reading from the Message
Center
1 From the main menu, select Messages > Text
Inbox.
Outbox, or Drafts. -or-
Highlight Quick Notes and press A under
Create.
Tip: This option is available from many
context-sensitive menus in the message
center.
2 Select the message you want to read. -or-
Press the number of the message you want to
read.
2 To address the message:
Use the keypad to enter the phone number of
the person you want to send the message to.
-or-
3 If the message fills more than one screen, scroll
to read it.
Tip: Scrolling through one message lets you
Press A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
view the next message.
4 To save the message, press O. -or-
To reply to the message, press A under Reply.
When you are finished, press O.
-or-
3 Enter the text of the message. -or-
To see all other choices, including forwarding
and deleting the message, calling the sender, or
77
Creating and Sending Messages
To use a quick note: Press A under Browse.
Scroll to the quick note you want. For more
information on quick notes, see “Using Quick
Notes”.
5 Follow step 3 through step 4 of “Creating and
Sending Messages” on page 77.
Beginning Messages From the Idle
Screen
When you are finished, press O.
1 Using the keypad, enter the number you want to
4 If you want to send the message, press A under
send a message to.
Send. -or-
2 Press m.
To edit the message, press O. -or-
3 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
To delete the message without sending it, press
A under Cancel. -or-
4 Follow step 3 through step 4 of “Creating and
If you want to request confirmation of delivery,
save the message as a draft, or set the sending
method, press m. Select the option you want.
Sending Messages” on page 77.
Using Quick Notes
Beginning Messages From the Recent
Calls List
1 From the recent calls list, scroll to the name you
want to send a message to.
Quick notes are short, pre-written text messages
that you can create, edit, and send. You can store
up to 20 quick notes. A quick note may be up to 30
characters long.
2 If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
To create a quick note:
1 From the main menu, select Messages > Quick
Notes > [New Note].
2 Press O or press A under Create. Enter text.
-or-
3 Press m.
4 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
To choose from pre-installed notes, select the
note you want.
78
MOSMS Messages
Tip: For more options, including sending the
Deleting Sent Messages
quick note, press m.
Using Drafts
When you save a message as a draft, it is saved in
the drafts folder.
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to delete.
3 Press A under Delete.
4 Press A under Yes to confirm.
To edit a draft:
1 From the main menu, select Messages >
Drafts.
To delete all unlocked sent messages:
2 Select the draft you want to edit.
1 From the main menu, select Messages > Text
3 To edit the fields you want to change, follow
step 2 through step 4 in “Creating and Sending
Messages” on page 77.
Outbox.
2 Press m.
3 Select Delete All.
4 Press A under Yes to confirm.
Resending Messages
To resend a message:
Locking and Unlocking Sent
Messages
When you lock a message, it cannot be deleted
until you unlock it.
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to resend. -or-
Press the number of the message you want to
resend.
Locking a Message
1 From the main menu, select Messages > Text
Outbox.
3 Press s. -or-
Press m. Select Resend.
2 Scroll to the message you want to lock or
unlock.
3 Press m.
79
Sorting Messages
4 Select Lock.
The text inbox holds 20 messages. If the text inbox
is full, you cannot receive messages until you
delete some.
Unlocking a Message
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to lock or
unlock.
The outbox and drafts folder share memory space.
Together they can hold 30 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some.
3 Press A under Unlock.
To view the amount of memory available in your
text inbox:
Sorting Messages
You can sort messages in your inbox by sender,
time and date, and status. You can sort messages
in your outbox by recipient, time and date, and
status.
1 From the main menu, select Messages > Text
Inbox.
2 Press A under Memory.
To view the amount of memory available in your
outbox and drafts folder:
1 From the main menu, select Messages > Text
Inbox or Messages > Text Outbox.
2 Highlight any messages.
3 Press m.
1 From the main menu, select Messages > Text
Outbox or Messages > Drafts.
2 Press A under Memory.
4 Select Sort and Order.
5 Select Sort By to specify the sorting method.
6 Select Order By to specify the sorting order.
Managing Memory
Your text inbox, outbox, and drafts folder have a
set amount of memory available for storing
messages.
80
MOSMS Messages
81
2 If you want to adjust the zoom, lighting, picture
quality, picture size, or a timer, set these options.
See “Setting Picture Options”.
3 Aim the camera lens on the flip. Use the internal
display as the viewfinder.
Camera
The camera in your i850 phone takes pictures. You
can save these pictures in your phone and view
them through the media center.
4 When the image you want to capture is in view,
You can send the pictures you take in Private calls,
assign them to Contacts entries, or set them as
your phone’s wallpaper.
5 To save the picture, press c or press O or press
A under Store. -or-
Accessing the Camera
From the main menu, select Camera. -or-
To discard the picture without saving it, press A
under Discard. -or-
To choose another action, see “More Actions for
Captured Pictures” on page 84.
From the idle screen, press c. -or-
On your keypad, press the number assigned to
the Camera shortcut. -or-
Setting Picture Options
Access the camera from the media center. See
When you take a picture, you can set the zoom,
lighting, picture quality, and picture size, and set a
timer to delay capturing the picture.
“Accessing the Camera” on page 92. -or-
Access the camera during a Private call. See
“Starting a Call by Sending a Picture” on page
98. -or-
To set any of these options:
1 Press m.
If you set the camera as a power up application
under Settings, then press p to power up your
phone.
2 Select the option you want.
3 Select the value you want for that option.
Tip: You can also set zoom by scrolling up and
down and set picture size by scrolling left
and right.
Taking Pictures
1 Access the camera.
82
Camera
If you either discard the picture or save it by either
pressing O or selecting Save from the
context-sensitive menu, the only picture option that
changes is the timer. The timer returns to its
default: Off.
Picture Quality
The Picture Quality option lets you choose the
sharpness the picture will have after it is captured.
The values are:
If you choose any other action, all picture options
return to their defaults.
•
•
Normal — no change
Fine — higher resolution
Zoom
When you receive your phone, Normal is the
default. You can choose a new default for this
option. See “Customizing the Camera” on page 85.
The Zoom option lets you choose a closer view.
The values are:
Pictures taken with this option set to Fine use more
memory space.
•
•
•
1X — no change
2X — twice as large
4X — 4 times as large
Picture Size
The Picture Size option lets you choose the size
the picture will have after it is captured.
1X is the default.
Lighting
From smallest to largest, the values are: Small,
Medium, Wallpaper, Large, and XLarge.
The Lighting option lets you adjust the camera
settings for different lighting conditions:
If you plan to use the image as wallpaper, it is best
to select the Wallpaper size.
•
•
Normal. Used for normal light exposure.
When you receive your phone, Medium is the
default. You can choose a new default for this
option. See “Customizing the Camera” on page 85.
Low Light. When the light is slightly dimmer, the
lens lets in more light to compensate for lack of
light.
Larger pictures use more memory space.
Normal is the default.
83
More Actions for Captured Pictures
Self-Timer
Sending in Private Calls
The Self-Timer option lets you delay capturing the
picture for the number of seconds you choose. The
camera captures the picture after the amount of
time you chose elapses.
For information on sending captured pictures in
Picture” on page 98.
Assigning to Contacts
1 After you have captured a picture, press m.
To turn off the timer before the picture is captured,
press A under Cancel.
2 Select Set As Caller ID.
3 To store the picture to a new entry, select [New
Contact]. -or-
The values are: Off, 10 seconds, 15 seconds, 20
seconds.
Off is the default.
To store the picture to an existing entry, select
the entry.
More Actions for Captured
Pictures
After you capture a picture as described in “Taking
Pictures” on page 82, you can send it in a Private
call, assign it to a Contacts entry, or set it as your
phone’s wallpaper.
Only entries that include phone numbers are
displayed. This icon g appears next to entries
that have pictures assigned.
4 If you selected an entry with a picture assigned,
press O or press A under Yes to overwrite the
assigned picture. -or-
You can also access the media center to view and
perform actions on the pictures there.
Press A under No to return to the list of entries
without overwriting the assigned picture.
Choosing any of these options automatically saves
the captured picture.
Setting as Wallpaper
1 After you have captured a picture, press m.
2 Select Set As Wallpaper.
84
Camera
Note: If you later set your wallpaper to Auto
Note: The volume of the shutter sound is
controlled by your phone’s speaker
volume.To set your phone’s speaker
volume, see “Setting the Volume” on page
130.
Cycle, the picture is included and will
appear on the idle screen. See
“Wallpaper” on page 130.
Accessing the Media Center
You can access the media center from the camera
at any time, except when you are using the
Camera Setup menu or viewing the memory
screen.
•
•
Default Size — sets the default value for the
Picture Size option.
Default Quality — sets the default value for the
Picture Quality option.
To access the Camera Setup menu:
1 Press m.
2 Select Media Center.
1 Access the camera.
2 Press m.
3 Select Camera Setup.
Customizing the Camera
The Camera Setup menu lets you customize the
camera:
Tip: This option is available from many
context-sensitive menus when you are
using the camera.
•
Ask for Name — If you set this option to On,
you are prompted to enter a name for each
picture before you save it. Otherwise, pictures
are automatically saved with the date and a
number as their names.
Managing Memory
While you are taking pictures, the percentage of
free memory appears on the screen.
To view your used memory, free memory, and
memory capacity:
•
Shutter Sound — sets the sound the camera
makes as it captures a picture.
1 Access the camera.
2 Press m.
3 Select Memory Usage.
85
Managing Memory
Tip: This option is available from many
context-sensitive menus when you are
using the camera.
To free memory, delete items from the media
center. See “Media Center” on page 87.
86
Viewing the Media Center
To access the media center:
Media Center
The media center lets you access pictures and
audio recordings.
From the main menu, select Media Center. -or-
All pictures saved in your phone can be accessed
through the media center.
From the camera, press m. Select Media
Center.
The following audio recordings can be accessed
through the media center:
Scroll to view the items in the media center.
Choosing Thumbnail View or List
View
•
Voice records created when your phone was not
in a call
•
•
Musical ring tones in the list of ring tones
You can set the media center to show a thumbnail
of each picture as you view the list of items or show
the list of items without thumbnails.
Audio recordings you downloaded to your phone
Pictures and audio recordings in the media center
can be sent in Private calls using Send via PTT.
See “Using Send via PTT” on page 97.
To change views:
1 Access the media center.
2 Press m.
3 Select Set View.
Note: You can transfer pictures from your phone
to your computer using a data cable and
software you can download. Go to
idenphones.motorola.com/iden/support
for more information.
4 Select Plain List View or Thumbnail List View.
Filtering by Media Type
You can set the media center to show all items,
only pictures or only audio recordings.
Setting Filtering
1 Access the media center.
87
Forward Locked Items
2 Press m.
3 Select Filter.
4 Select All, Pictures, or Audio.
Sorting by Time or Name
You can set the media center to sort items by the
time the item was created or by the name of the
item.
Tip: You can also scroll through these options
while viewing the list of items by either
scrolling left or right or pressing * or #.
1 Access the media center.
2 Press m.
3 Select Setup.
Keeping the Last Filter Setting
You can set the media center to show all items
every time you access it or to keep the filtering
setting you had when you last viewed it.
4 Select Sort.
5 Select By Time or By Name.
When you receive your phone, the media center is
set to sort items by time.
1 Access the media center.
2 Press m.
3 Select Setup.
Forward Locked Items
4 Select Remember Filter to keep the filtering
setting you had when you last viewed the media
center.
Some items saved to the media center from Private
calls or by downloading may be forward locked.
Forward locked items are usually copyright
protected, and you cannot share them with
anyone, such as in Private calls, or by uploading
them from your phone.
When you receive your phone, the media center is
set to show all items every time you access it.
Accessing Items Listed
To access a picture or audio recording, select it
from the list of items in the media center.
You cannot remove forward locking from an item.
With an item selected, scroll up or down to access
the items that appeared before and after it in the
list.
88
Media Center
When you view items in the media center, one of
these icons appears next to each forward locked
item:
For more information about DRM items, see
“Digital Rights Management” on page 93.
Note: While your phone supports gifting and
Tell-A-Friend services for DRM items,
these services may not be offered by your
service provider. Please contact your
service provider for more information.
Forward locked.
f
c
Forward lock and locked.
When an item is locked, it cannot be deleted from
the media center. See “Locking Items” on page 91.
Locking an item has no effect on its forward
locking.
Pictures
The media center lets you view pictures, send
them in Private calls, assign them to Contacts
entries, or set them as your phone’s wallpaper.
DRM Items
Except for Java applications, which download to
Java Apps, the default location for any DRM items
that you download is the media center.
Viewing
To view a picture, select it from the list of items in
the media center.
If your phone is set to show thumbnails, a
thumbnail of each picture appears next to the
picture in the list of items. If your phone is not set to
show thumbnails, this icon g appears next to the
picture.
Depending on how a given third-party vendor has
set rights for an item, the item may include the
following status icons.
c
e
The item is a DRM item.
To see a larger or smaller view of the picture you
are viewing:
The DRM item has expired.
All DRM items are forward locked. As with other
items in media center, you can lock DRM items.
See “Locking Items” on page 91.
1 Press m.
2 Select Zoom.
3 Select the zoom option you want.
89
Audio Recordings
If the picture does not fit in the display, scroll left
and right and up and down to view different parts of
the picture.
Setting as Wallpaper
1 Scroll to or select the picture you want to set as
wallpaper.
2 Press m.
3 Select Set As Wallpaper.
Sending in Private Calls
For information on sending stored pictures in
Private calls, see “Starting a Call by Sending a
Picture” on page 98.
Note: If you later set your wallpaper to Auto
Cycle, the picture is included and will
appear on the idle screen. See
Assigning to Contacts
“Wallpaper” on page 130.
1 Scroll to or select the picture you want to assign
Audio Recordings
The media center lets you play audio recordings
and assign them to Contacts entries.
to a Contacts entry.
2 Press m.
3 Select Set As Caller ID.
4 To store the number as a new entry, select [New
Contact]. -or-
Playing
To play an audio recording, select it from the list of
items in the media center.
To store the number to an existing entry, select
the entry.
This icon a appears next to each audio recording
Only entries that include phone numbers are
displayed. This icon g appears next to entries
that have pictures assigned.
in the list of items.
Tip: When viewing the list of items in the media
center, you can scroll left or right, or press
* or #, to change the type of media that is
displayed in the list.
5 If you selected an entry with a picture assigned,
press O or press A under Yes to overwrite the
assigned picture. -or-
Press A under No to return to the list of entries
without overwriting the assigned picture.
90
Media Center
To stop the audio recording before it has finished
playing:
4 Select Rename.
5 Delete the item’s name and enter a new name.
6 Press O.
Press O. -or-
Scroll left.
Locking Items
When you lock an item in the media center, it
cannot be deleted until you unlock it.
To restart the audio recording, scroll right.
When you play an audio recording, an animated
image appears on the display.
1 Access the media center.
2 Scroll to or select the item you want to lock or
unlock.
Assigning to Contacts
To assign an audio recording in the media center
as the ring tone for a Contacts entry:
3 Press m.
4 Select Lock to lock the item. -or-
1 Scroll to or select the audio recording you want
to assign.
Select Unlock to unlock the item.
2 Press m.
3 Select Assign As Ringer.
When you view items in the media center, one of
these icons appears next to each locked item:
4 Select the Contacts entry you want to assign the
ring tone to.
Locked.
R
Note: You cannot assign a voice record as the
Forward lock and locked.
c
ring tone for a Contacts entry.
Deleting Items
Renaming Items
Deleting items from the media center deletes them
from all parts of your phone, including the list of
ring tones, the list of voice records, and Contacts.
1 Access the media center.
2 Scroll to or select the item you want to rename.
3 Press m.
91
Accessing the Camera
Under certain conditions, some DRM vendors will
not charge you if you download an item multiple
times within a given time frame. Please contact the
DRM vendor to learn more about their download
regulations.
You can access the camera from the media center
at any time, except when you are viewing a list of
audio recordings, playing an audio recording, or
using the Setup menu.
Deleting an Item
1 Scroll to or select the item you want to delete.
2 Press m.
Select [Camera] from the list of items. -or-
Press c. -or-
Press A under Camera.
3 Select Delete.
4 Press O or A under Yes to confirm.
Managing Memory
To view your used memory, free memory, and
memory capacity:
Deleting All Items
You can delete all unlocked items currently in view,
depending on how media center filtering is set. See
“Filtering by Media Type” on page 87. If filtering is
set to show all types of media center items, all
unlocked items are deleted.
1 Access the media center. -or-
Scroll to or select any item in the media center.
2 Press m.
1 Access the media center.
2 Press m.
3 Select Delete All.
3 Select Memory Usage.
To free memory, delete items in the media center.
Note: Items in the media center are stored in
your phone using the same memory
space used to store messages, Java
application data, and voice records
created when your phone is in a call.
Deleting some of these other items frees
memory for media.
4 Press O or A under Yes to confirm.
92
Digital Rights Management
To send the DRM installation to the background,
Digital Rights
Management
When you download multimedia content available
online, such as audio, images, or Java
press e.
Understanding DRM Status
Icons
applications, these items may be subject to DRM
restrictions. DRM, or digital rights management, is
a system that defines how copyrighted multimedia
content can be distributed and used.
Depending on how a given third-party vendor has
set rights for an item, the item may include the
following status icons:
c
e
The item is a DRM item.
DRM sets items to time-based or count-based
usage settings. Time-based settings let you use
the given item for a specified interval. Examples of
time-based settings include being able to use an
item for a specified number of days from the date
of purchase, a specified number of days from the
date that the item is first used, or a specified
number of minutes. Count-based settings let you
use an item for a specified number of times after
you download it or for unlimited use.
The DRM item has expired.
As with other items in media center, you can lock
DRM items. See “Locking Items” on page 91.
Note: All DRM items are forward locked. See
“Forward Locked Items” on page 88.
Sharing Items
Note: These features may not be offered by
Installing Items
Except for DRM Java applications, DRM items will
automatically install once they have finished
downloading.
your service provider.
You can gift a DRM item to a friend’s phone. Gifting
is when you purchase a copy of a DRM item and
send it to someone. If you do not want to gift an
item, you can send a message to a friend’s phone
To install DRM Java applications, see “Installing
Applications” on page 111.
93
Managing DRM Items
that contains the link for purchasing the item. The
friend can then purchase the item quickly and
easily. Sending this type of message is called
Tell-A-Friend.
Tell-A-Friend
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to tell your
friend about.
3 Press m.
4 Select Tell-A-Friend.
Gifting
To check if a DRM item is giftable:
1 Go to the location on your phone that contains
the item you want.
The Create Message screen opens.
2 Highlight the DRM item you want to gift.
3 Press m. If Gift is an option, the item is giftable.
5 Complete and send the message. See “Creating
and Sending Messages” on page 77.
To gift a DRM item:
Managing DRM Items
Note: Depending on how the third-party vendor
has set rights for the given DRM item, you
may be unable to perform some of the
following tasks.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to gift.
3 Press m.
4 Select Gift.
Viewing License Information
You can check a DRM item’s license to view the
following information:
5 Select the contact you want to send the item to.
-or-
If the person you want to send the item to is not
in contacts, select [New Number]. Enter the
number.
•
For time-based items, either the date and time
the item is scheduled to expire, or the number of
days left
6 Press O.
•
For count-based items, the number of credits
(uses) left or an unlimited use notice
7 Follow the vendor’s instructions for purchasing
an additional license.
94
Digital Rights Management
The name of the item’s vendor
•
Deleting Items
To view the license of a DRM item:
If you delete a DRM item that you purchased from
your service provider from your phone, you will
have to purchase it again to download it.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to view license
Under certain conditions, third-party vendors will let
you download an item multiple times within a given
time frame, even if you deleted the item. Please
contact the third-party vendor of an item to learn
more about the vendor’s download regulations.
information for.
3 Press m.
4 Select License Info.
Renewing DRM Licenses
To delete an item:
Note: You can only renew DRM licenses if the
license contains a link to the page where
you purchased the item.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to delete.
3 Press m.
4 Select Delete.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to renew.
3 Press A under Renew or press m. Select
Renew.
4 Select the link to the page where you purchased
the item.
5 If prompted, press A under Yes.
About Expired Items
If you are using an item when it expires, once you
finish your session with the item, you will be unable
to use the item.
5 Follow the vendor’s instructions for purchasing
an additional license.
95
Managing DRM Items
When ring tones and wallpapers expire, they are
automatically removed from their respective lists.
For expired items that continue to display in their
respective lists, you can either choose to renew the
license for the item or else manually delete the
item.
Note: You cannot delete locked items.
96
Taking a Picture to Send
Using Send via PTT
Note: For more information on taking pictures,
Send via PTT lets you exchange pictures, My Info,
and contact information with other phones that
have this capability. You do this through Private
calls.
see “Taking Pictures” on page 82.
1 While in a Private call, press c or press A under
Camera.
2 When the picture you want to capture is in view,
press c or press O or press A under Capture.
Send via PTT cannot be used during group calls.
3 To save the picture so you can send it, press c
or press O or press m and select Save [OK].
-or-
Sending a Picture
Note: This feature may not be offered by your
service provider.
To discard the picture without sending it, press
A under Discard. Repeat step 2 until you
capture a picture you want to send.
When you send a picture using Send via PTT, the
picture you sent appears on the display of the
phone you are engaged in the Private call with and
is saved to that phone’s media center.
4 Press the PTT button to send the picture.
5 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
6 When prompted, press the PTT button to
resume the Private call.
Sending a Picture During a Call
You can send a picture at any time during a Private
call, whether you made or received the call*.
* Additional charges may apply.
Sending a Stored Picture
You cannot talk or listen on a Private call while a
picture is being transmitted. Other activities, such
as taking or searching for a picture, do not prevent
you from talking or listening.
1 While in a Private call: Press m. Select Browse
Pictures.
A list of pictures that can be included in a Private
call appears.
2 Select the picture you want to send.
97
Receiving a Picture
3 Press the PTT button to send the picture.
5 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
6 When prompted, press the PTT button to
resume the Private call.
4 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
5 When prompted, press the PTT button to
resume the Private call.
Receiving a Picture
When someone sends you a picture using Send
via PTT, your phone emits tone or vibrates and a
message appears on the display asking you if you
want to accept the picture.
Starting a Call by Sending a Picture
You can start a Private call after you capture a
picture with the camera or by choosing a stored
picture from the media center.
To do this, you must have the Private ID and IP
address of the person you want to send to stored in
your Contacts.
When you receive a picture, it appears every time
you are in a Private call with the person who sent it
unless you delete the picture from the media
center. This occurs for the last 20 people who sent
you pictures.
1 Capture a picture with the camera. See “Taking
Pictures” on page 82. -or-
From the media center, scroll to or select the
picture you want to send in a Private call.
Accepting a Picture
1 When you see the message asking you if you
want to accept the picture, press A under Yes.
2 Press m and select Send Picture via PTT.
2 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
3 When prompted, press the PTT button to
resume the Private call.
A list of names from Contacts appears. These
names have Private IDs and IP addresses
stored.
3 Select the name of the person you want to send
the picture to.
4 Press the PTT button to send the picture.
Tip: If you want to stop the transmission before it
is finished, press A under Cancel.
98
Using Send via PTT
Declining a Picture
Sending My Info
When you see the message asking you if you
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it. See “Setting Sending Options” on page
103.
want to accept the picture, press A under No.
The picture is not transmitted.
Setting Picture Capability
To turn your phone’s ability to send and receive
pictures in Private calls on or off:
Tip: When you send My Info, certain
information, such as your email address or
fax number, cannot be included. To send
complete contact information, create an
entry for yourself in Contacts and send it.
1 From the main menu, select Settings > 2-Way
Radio > PTT Picture.
2 Select On or Off.
Sending Information During a Call
This setting does not affect your phone’s ability to
send and receive My Info or contact information.
1 While in a Private call, press m.
2 With Send My Info via PTT highlighted, press
O.
3 When Ready to Send appears on the display,
press the PTT button to send the information.
Sending My Info and Contact
Information
When you send My Info or contact information
using Send via PTT, the information you sent
appears on the display of the phone you are
engaged in the Private call with. After the call, the
information appears on the recent call list of that
phone.
Starting a Call by Sending Information
1 From the main menu, select My Info.
2 Press m.
3 With Send My Info via PTT highlighted, press
O.
4 Use the keypad to enter the Private ID you want
to send the information to. -or-
99
Sending My Info and Contact Information
Press A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Starting a Call by Sending Information
1 From Contacts or the recent calls list, scroll to or
select the entry you want to send.
2 Press m.
3 Select Send Contact via PTT.
5 When Ready to Send appears on the display,
press the PTT button to send the information.
4 Use the keypad to enter the Private ID you want
Sending Contact Information
You can send contact information by selecting a
Contacts entry or an item from the recent calls list.
to send. -or-
Press A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Contacts entries that contain only addresses
cannot be sent. When Contacts entries are
received, they do not include ring tones or pictures.
5 When Ready to Send appears on the display,
press the PTT button to send the information.
These items from the recent calls list can be sent:
Receiving My Info or Contact
Information
When you receive My Info or contact information
from another phone, an icon appears on the
display:
•
•
Contact information sent from other phones
Calls to or from numbers stored in your Contacts
list
Sending Information During a Call
1 While in a Private call, press m.
2 Select Contacts or Recent Calls.
3 Scroll to the Contacts entry or item in the recent
My Info.
j
d
Contact information.
calls list you want to send.
4 Press m.
To view the information while still in the Private
call:
5 Select Send Contact via PTT or Send SDG via
PTT.
6 Press the PTT button to send the information.
1 Press m.
100
Using Send via PTT
2 Select View Contact.
You can also view My Info from other phones on
the recent calls list. See “Recent Calls” on page 32.
101
•
•
IP1 Address and IP2 Address — the IP
addresses you use to access the Internet with
your phone.
My Info
My Info lets you view information about your
phone. Depending on your service provider, you
may also be able to send this information to other
phones.
Circuit Data — the number you use if you want
to use your phone to transfer circuit data. See
“Using Your Phone as a Modem” on page 55.
You receive this number from your service
provider.
Viewing My Info
Note: If you request equipment-related
transactions on your account, your service
provider may require you to provide
specific information about your phone. By
pressing m anytime while in My Info, a
submenu will appear that includes your
phone's service status, unit information,
and phone identification numbers
including IMEI, SIM ID, and Serial
Number (SN). Please be prepared to
supply the representative with this
information when requesting these types
of transactions.
1 From the main menu, select My Info.
2 Scroll to see the entire screen.
The My Info screen contains:
•
•
My Name — You can enter your name here.
Line 1 and Line 2 — your phone numbers for
phone lines 1 and 2. Each number appears
when you receive your first call on that line.
•
Private — Your Private ID is the number that
others use to contact you using Private calls.
This number appears when you receive your
first Private call.
•
•
Group ID — the number of the Talkgroup you
Editing My Info
To edit My Info to enter or change the text that
appears in My Name:
have joined.
Carrier IP — the IP address assigned to your
service provider. This number appears when
you register for packet data services.
1 From the main menu, select My Info.
2 Press A under Edit.
3 Select Name.
102
My Info
4 Enter the name you want to appear. See
“Entering Text” on page 70. When you are
finished, press O.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press m.
3 Select Send My Info Setup > Info to Send.
4 A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
You can also edit the information in Line 1, Line 2,
and Circuit Data, but your changes are only
temporary. The next time your phone registers on
the network, your actual phone numbers and circuit
data number appear again in My Info.
5 When you are finished, press A under Done.
Setting Sending Options
Automatic Sending
To control whether your information is sent
automatically:
Note: This feature may not be offered by your
service provider.
Your phone can send information in My Info to
other phones that have this capability.
1 From the main menu, select My Info.
2 Press m.
3 Select Send My Info Setup > Auto Send.
4 To set your information to be sent automatically,
set this option to On. -or-
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it.
To set your information to be sent only when you
choose to send it, set this option to Off.
Information Sent
The information your phone sends always includes
My Name and Private.
Line 1, Line 2, Carrier IP, and Circuit Data may
also be sent, depending on the options provided by
your service provider and how you set your
sending options.
103
•
•
A repeat — lets you store the event as a
recurring event.
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A reminder — If an event has a start time, you
can set Datebook to remind you that the event is
going to start.
•
•
a ring tone for the reminder
A Datebook event contains:
a profile that your phone is switched to while the
event is occurring
a Java application that starts when the event
starts
•
•
•
A subject — A name you assign to the event.
You can also enter a phone number, Private ID,
or Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
•
Only the subject and date are required.
A location — The location of the event. You can
also enter a phone number, Private ID, or
Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
Viewing Datebook
To access Datebook:
From the main menu, select Datebook.
A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
In day view, brief information about each event for
that day appears.
•
•
A duration — The length of time the event lasts.
A date — The date automatically assigned to an
event is the date that was highlighted or
selected when you began creating the event.
You can change this date before storing the
event.
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a
marker in the corner.
104
Datebook
To view an event:
Creating Events
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
1 Select the day the event occurs.
2 Select the event.
To change the current view:
You may enter the information in any order by
scrolling through the event details.
1 While viewing Datebook, press m.
2 Select the view you want.
After you have entered the information you want,
you can press A under Done to store the event to
Datebook.
Navigating Datebook
To scroll through Datebook:
If you decide you do not want to store the event:
Press A under Cancel.
Scroll left and right using the navigation key. -or-
In week view and month view, press * or #.
To see more in day view:
To create a Datebook event:
1 While viewing Datebook, press A under New.
-or-
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
In day view, select [New Event].
2 To assign a subject to the event:
Select Subject.
Enter the name. -or-
1 While viewing Datebook, press m.
2 Select Go To Today.
Press A under Browse to choose from common
event names. -or-
To go to any date in Datebook:
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
1 While viewing Datebook, press m.
2 Select Go To Date.
3 Select the date you want.
When you are finished, press O.
105
Creating Events
3 If you want to assign a location to the event:
Select Location.
Enter the date you want.
7 If you want to make the event a recurring event:
Select Repeat.
Enter the location. -or-
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
Select the repeat cycle you want.
If the event occurs more than once a week:
Select Multiple Day. Select the days you want.
When you are finished, press O.
Press A under Done.
4 The start time automatically assigned to an
event is the beginning of the day. If you want to
change the start time or assign no start time:
Select End. Select the date you want this event
to stop recurring.
8 If you want to create a reminder for this event:
Select Reminder.
Select Start.
Enter the start time you want. -or-
Press A under No Time to assign no start time.
5 If you want to assign a duration to the event:
Select Duration.
Select the reminder time you want. -or-
Select Custom to enter a reminder time.
Note: If an event has no start time, you cannot
create a reminder for it.
Select the duration you want. -or-
Select Custom to enter a duration.
9 If you have entered all the information you want
for this event, press A under Done. -or-
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event.
If you want to assign a ring tone, a profile, or a
Java application to the event, see “Assigning
More Options” on page 107.
To change the date of the event:
Select Date.
106
Datebook
Assigning More Options
To assign more options before storing an event:
Editing Events
To change the details of an event:
1 If you have created a reminder for the event and
1 Select the day the event occurs.
2 Select the event.
3 Press A under Edit.
want to set the ring tone for that reminder:
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
4 Follow the applicable instructions in “Creating
Events” on page 105 to edit the various fields.
2 If you want to assign a profile that your phone is
To copy an event to another date:
switched to while the event is occurring:
1 Select the day the event occurs.
2 Select the event.
Select Profile.
Select the profile you want from the profiles
stored in your phone.
3 Press m.
4 Select Copy.
Your phone switches to this profile when the
event starts and switches back to the previous
profile when the event ends.
5 Press A under Yes to confirm.
6 Enter the date you want.
7 Press O.
8 If you want to change more information, follow
the applicable instructions in “Creating Events”
on page 105 to edit the various fields.
3 If you want to assign a Java application to start
when the event starts:
Select App.
Select the application you want from the Java
applications stored in your phone.
Deleting Events
1 Select the day the event occurs.
2 Select the event.
3 Press m.
If you created a reminder for this event, your
phone prompts you to start the Java application
when you get the reminder.
4 Select Delete.
107
Receiving Reminders
5 If the event is not a recurring event, press O or
For Events with Java Applications
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
press A under Yes to confirm. -or-
If the event is a recurring event:
Select This Event Only to delete only the event
selected in step 2.
1 Press m.
Select Repeat Event to delete all occurrences
of the event.
2 Select Launch.
Making Calls From Datebook
and Datebook Reminders
If you stored a phone number, Private ID, or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from Datebook or from the
reminder of that event.
Receiving Reminders
If you created a reminder for a Datebook event,
when the reminder time occurs, your phone notifies
you with text on the display and a reminder tone.
To view more details about the event:
Open the flip. -or-
If you store numbers in both the Subject and
Location fields, you can call or send a call alert to
the number stored in Subject and the number
stored in Location as long as the number stored in
Subject is a Private or Talkgroup number and the
number stored in Location is a phone number.
Press A under View.
To dismiss the reminder:
If the flip is closed, press .. -or-
If the flip is open, press O, press A under
Dismiss, or close the flip.
If both are the same type of number, the number in
Subject is called or sent a call alert. To call or send
a call alert to the number stored in Location, you
must delete the number stored in Subject.
108
Datebook
Press m. Select Call # in Event.
To make a Private call or Talkgroup call:
Press the PTT button. -or-
Making Calls from Datebook
To make a phone call:
1 Highlight or select the event containing the
number you want to call.
2 Press s. -or-
If you did not include a # before the Talkgroup
you want to call: Press m. Select Talkgroup.
Press the PTT button.
Press m. Select Call # in Event.
To make a Private call or Talkgroup call:
To send a call alert:
Press m. Select Alert # in Event. Press the PTT
button.
1 Highlight or select the event containing the
number you want to call.
2 Press and hold the PTT button on the side of
your phone. -or-
Customizing Datebook Setup
To access Datebook set up options:
If you did not include a # before the Talkgroup
you want to call: Press m. Select Talkgroup.
Press the PTT button.
1 From the main menu, select Datebook.
2 Press m.
To send a call alert:
3 Select Setup.
1 Highlight or select the event containing the
You can view or change these options:
number you want to call or send a call alert to.
•
•
Start View — sets Datebook to start in day view,
week view, or month view when you access
Datebook.
2 Press m. Select Alert # in Event. Press the PTT
button.
Daily Begin — sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
Making Calls from Datebook
Reminders
To make a phone call:
Press s. -or-
109
Customizing Datebook Setup
•
•
•
Delete After — sets the amount of time
Datebook waits to delete an event after it
occurs.
Time Shift — lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
message notification, call alert, or Datebook
reminder.
•
Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
110
Running Applications
To run an application that has a shortcut on the
main menu:
Java Applications
Your phone arrives with Java applications
preloaded. These preloaded applications
autoinstall the first time you open them.
1 From the main menu, select the application or
suite of applications you want to run.
2 If you have selected a suite of applications,
select the application you want to run.
You can download and install more Java
applications.
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
To run an application that does not have a shortcut
on the main menu:
1 From the main menu, select Java Apps.
2 Select the application or suite of applications
you want to run.
3 If you have selected a suite of applications,
select the application you want to run.
Installing Applications
1 From the main menu, select Java Apps.
2 Select the application or suite of applications
you want to install.
Tip: If you do not hear the sounds associated
with the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
Installation messages appear as the application
installs.
3 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes. Press O.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
4 Press A under Done.
To suspend an application:
Press e or close the flip.
111
Resuming Applications
To view your suspended applications:
To end all applications:
From the Java menu, select Suspended Apps.
1 From the main menu, select Java Apps.
2 Scroll to Suspended Apps.
3 Press m.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
4 Select End All.
5 Press O or press A under Yes to confirm.
6 If you want to end all applications without letting
them exit, press A under EndNow.
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
Downloading Applications
1 From the Java menu, select Suspended Apps.
2 Select the application you want to resume.
If you want to run more Java applications, you can
download them into your phone.
Ending Applications
To end an application:
For a selection of Java applications and
downloading instructions, please contact your
service provider.
1 From the main menu, select Java Apps.
2 If the application you want to end is part of a
suite of applications, select the suite.
About DRM Java Applications
Your phone supports gifting and Tell-A-Friend
services for DRM Java applications. However,
these services may not be offered by your service
provider. Please contact your service provider for
more information about these services.
3 Scroll to the application you want to end.
Press A under End. -or-
If End is not one of your options: Press m.
Select End.
For more information about DRM items, see
“Digital Rights Management” on page 93.
Tip: You can also end applications from the
Suspended Apps screen.
112
Java Applications
Deleting Applications
Managing Memory
To view the amount of memory available for Java
applications:
Note: Under certain conditions, some DRM
vendors will not charge you if you
download an item multiple times within a
given time frame. Please contact the DRM
vendor to learn more about their
1 From the main menu, select Java Apps > Java
System.
2 Press A under Next.
3 To see more memory information, press A
under Next again.
download regulations.
To delete an application:
1 From the main menu, select Java Apps.
2 Scroll to the application you want to delete.
3 Press m.
4 Select Deinstall.
5 Press O or press A under Yes to confirm.
Deleting Java applications frees memory.
Note: Java application data is stored in your
phone using the same memory space
used to store messages, voice records,
pictures, ring tones, and wallpaper
images. Deleting some of these other
items frees memory for Java applications.
6 When your phone has finished deleting the
application, press A under Done.
To delete all Java applications:
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
1 From the main menu, select Java Apps.
2 Scroll to Java System.
3 Press m.
4 Select Delete All.
5 Press O or press A under Yes to confirm.
To create a shortcut to an application that is
already installed:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -or-
113
Java Applications and GPS Enabled
From the main menu: Press m. Select Main
Java Applications and GPS
Enabled
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press O.
5 Press A under Done.
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 117 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects
your privacy by giving you the option to block all or
some Java applications from accessing the
location of your phone.
To remove a shortcut:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -or-
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
From the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to remove the
shortcut for.
•
Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
4 Press O.
5 Press A under Done.
•
Unrestricted — All Java applications may
access the location of your phone, without
notifying you.
114
Java Applications
•
By Permission — When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
•
•
Always — If the application requests access
to the location of your phone again, the
request is denied without notifying you.
For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is denied without notifying you.
See “Setting Privacy Options” on page 123 for
information on choosing these options.
•
Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
Granting or Denying Permission
If you choose By Permission, you must grant or
deny each Java application access to the location
of your phone when the application requests
access for the first time. You may be required to
grant or deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application”).
To grant this request:
1 Press A under Grant. The application accesses
your phone’s location.
2 Select the granting option you want:
•
Always — If the application requests access
to the location of your phone again, the
request is granted without notifying you.
When a Java application requests access to the
location of your phone, a screen appears informing
you.
•
For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is granted without notifying you.
To deny this request:
1 Press A under Deny. The application does not
•
Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
access the location of your phone.
2 Select the denying option you want:
115
Java Applications and GPS Enabled
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you
have the opportunity to set the GPS privacy
options for that Java application.
1 From the main menu, select Java Apps.
2 Scroll to the application or suite of applications
you want to set the privacy options for.
3 Press m.
4 Select Permissions.
5 Select the privacy options you want for this
application:
•
Always — The application always has
permission to access the location of your
phone, without notifying you.
•
Ask — When the application requests access
to the location of your phone, you are
prompted to grant or deny permission (see
“Granting or Denying Permission” on page
115).
•
Never — When the application requests
access to the location of your phone, the
request is denied without notifying you.
116
Java applications loaded on your phone can also
request your location. If your phone is connected to
a laptop computer or similar device, software
running on that device can request your location.
To protect your privacy, you can control whether
these requests are granted.
GPS Enabled
Your phone’s GPS Enabled feature uses
information from Global Positioning System (GPS)
satellites orbiting the Earth to determine the
approximate geographical location of your phone,
expressed as latitude and longitude. The
availability and accuracy of this location
IMPORTANT: Things to Keep
in Mind
If you are using the GPS feature of your phone
while driving, please give full attention to driving
and to the road.
information (and the amount of time that it takes to
calculate it) will vary depending on the environment
in which you are using the GPS feature. For
example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. Also,
nearby radio and electronic equipment may block
or interfere with reception from these distant
satellites. SEE: “IMPORTANT: Things to Keep in
Mind”.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are
not limited to:
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your
emergency response center is equipped to process
such information.
•
•
In underground locations
Inside of buildings, trains, or other covered
vehicles
•
•
•
Under any other metal or concrete roof or
structure
You can also use the GPS feature to view your
approximate location. Location information
appears on the phone’s display.
Between tall buildings or under dense
tree-cover
Near a powerful radio or television tower
117
IMPORTANT: Things to Keep in Mind
•
Some radios, entertainment equipment and
other electronic devices may generate
signals that can block or interfere with the
GPS receiver ability to receive the distant
satellite signals, particularly when such
devices are operating in close proximity to
the GPS receiver. Therefore, in a 911 call, or
when otherwise using the GPS location
function, always move your phone away
from any such devices.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes
much further from your actual location. Advice
on how to improve GPS performance is
provided in “Enhancing GPS Performance” on
page 121.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
information and the time needed to obtain it will
vary depending on circumstances, particularly the
ability to receive signals from adequate numbers of
satellites.
•
•
When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
In temperature extremes outside the
operating limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information
becomes unavailable, it may reduce the speed and
accuracy of the location calculation.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
118
GPS Enabled
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
In some cases, your local 911 emergency
response center may not be equipped to
receive GPS location information. For this
reason, and because the GPS location information
reported is only approximate or may not be
available in your location (see “IMPORTANT:
Things to Keep in Mind” on page 117), always
report your location to the 911 operator you
speak to when making an emergency call, if able,
just as you would when using a phone without GPS
capabilities.
Making an Emergency Call
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take
the GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
GPS satellite signals and network assist data, it
may take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
information, contact your local authorities.
In general, if your phone has access to signals
from more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is
automatically made available to the emergency
response center, if the center has the capability to
receive such information.
119
Viewing Your Approximate Location
See “Enhancing GPS Performance” on page
121 for information on how to help your phone
determine your location.
It may take your phone several minutes to
complete the process of determining your location.
During this time, a message usually appears on
your phone’s display saying your phone is
scanning for satellites. For tips on getting the best
location calculation, see “Enhancing GPS
Performance” on page 121.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
This displays the following information about the
last time your location was calculated:
Press A under Cancel to return to the Position
•
•
•
The time (as Greenwich Mean Time) and date
that the location was last calculated
screen. -or-
The approximate location, expressed as latitude
and longitude
Press e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored
in your phone and remains there even when your
phone is powered off. You will see this information
the next time you view the Position screen.
The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
If you received a phone call or alert while
attempting to determine your location, the Position
screen will disappear, but your phone will continue
attempting to determine its location. If it is
successful, the new location information will be
displayed the next time you view the Position
screen.
•
The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
To calculate your location again:
Press A under Refresh.
120
GPS Enabled
•
Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is in your phone antenna. Hold
your phone away from your body, giving the
antenna clear access to satellite signals. Do not
cover the antenna area with your fingers or
anything else.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if
the center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
GPS antenna
To improve accuracy and increase your chances of
a successful calculation, do the following while
your phone is determining your approximate
location:
c
•
Stay in the open. The GPS feature works best
where there is nothing between your phone and
a large amount of open sky. If possible, go
outside, away from tall buildings and foliage.
While performance in a building is improved by
moving closer to windows, glass with certain sun
shielding films may block satellite signals.
p
•
Extend your phone antenna.
121
Updating Satellite Almanac Data
•
Move away from electronic devices. Radios,
entertainment devices, and other electronic
devices may generate interfering signals that
may prevent GPS receiver operation if they are
in close proximity to the phone. Move your
phone away from such devices when using the
GPS-Enabled feature.
Updating Satellite Almanac
Data
Note: This feature may not be offered by your
service provider.
Another way to keep the GPS feature of your
phone working well is to keep your satellite
almanac data up to date.
•
•
Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
The United States government maintains an
almanac of data about where GPS satellites are as
they orbit the Earth. This information is available to
your phone. Keeping your satellite almanac up to
date helps your phone determine your location
more quickly.
In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near a window.
The almanac contains information about the
location of satellites, their operational status, and
other satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to
get a fix in strong satellite signal conditions with
outdated almanac data, but it may take longer.
Note: Although moving your phone at a walking
pace decreases GPS performance,
moving it at the speed of a moving car
does not.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
•
Stay in network coverage. Depending on your
service provider, the network will provide your
phone with information that helps determine
your location more quickly and accurately.
122
GPS Enabled
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display.
You may be asked to go to a web site or call a
customer care number.
•
•
Unrestricted — All applications may view the
location of your phone, without notifying you.
By Permission — When an application
you will be prompted to give permission.
However, location information may still be
available to the phone’s owner, fleet manager,
or account administrator.
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
Note: Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If
you turn this feature on, you will be required to
enter a GPS PIN to access your GPS privacy
options.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
2 If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the GPS PIN
Security Feature” for more information.)
To turn the GPS Enabled security feature on or off:
1 From the main menu, select Settings >
Security > GPS PIN.
2 Select On or Off.
3 Enter the current GPS PIN.
3 Select the privacy option you want:
•
Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
Note: When you receive your phone, your GPS
PIN is 0000.
4 Press A under Ok.
123
Using GPS with Map Software
To change your GPS PIN:
which displays your location on a map. Your phone
provides an updated location every second and the
map software displays your changing location on
its map.
1 From the main menu, select Settings >
Security > Change Passwords > GPS PIN.
2 Enter the current GPS PIN.
See “Enhancing GPS Performance” on page
121 for more details on obtaining good location
information.
Note: When you receive your phone, your GPS
PIN is 0000.
3 Press A under Ok.
4 Enter the new 4- to 8-digit GPS PIN.
5 Press A under Ok.
6 Enter the new 4- to 8-digit GPS PIN to confirm.
7 Press A under Ok.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
Using GPS with Map Software
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
The map software running on your laptop or other
device must support NMEA 3.0.
To do this, connect your phone to your laptop (or
other device) with a data cable and set your phone
to transmit data (see “Getting Started” on page
125). Your phone then provides your approximate
location to the device running the map software,
124
GPS Enabled
2 With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
connector
cover
3 Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
125
Using GPS with Map Software
•
•
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
126
Filtering by Voice Record Type
Voice Records
You can set your phone to show all voice records,
only voice records created when your phone was in
a call, or only voice records created when your
phone was not in a call.
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself when your phone is not in a call or record
phone calls when your phone is in a call.
1 From the main menu, select VoiceRecord.
2 Press m.
3 Select Filter.
Voice records created when your phone is not in a
call can be accessed through the media center.
4 Select the option you want:
Viewing Voice Records
To view your list of voice records:
•
•
All — show all voice records.
In Call — show only voice records created
when your phone was in a call.
1 From the main menu, select VoiceRecord.
2 Scroll to view more voice records.
•
Standard — show only voice records created
when your phone was not in a call.
Voice Records Icons
One of these icons appears next to each voice
record:
Tip: You can also press * or # to scroll
through these options while viewing the list
of voice records.
A voice record made while your phone was
not in a call.
c
Creating Voice Records
Phone Not in a Call
To record a note to yourself:
A voice record made while your phone was in
a call.
v
1 From the main menu, select VoiceRecord >
[New VoiceRec].
127
Playing Voice Records
2 Say the message you want to record into the
microphone.
Labeling Voice Records
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
3 When you are finished recording, press O.
Phone in a Call
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to label.
3 Press A under Label.
4 Enter the label you want to assign. See
“Entering Text” on page 70.
To record a phone call:
1 While on an active call, press m.
2 Select Record.
3 To stop recording and discard the voice record
at any time, press A under Cancel.
5 Press O.
4 When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Locking Voice Records
When you lock a voice record, it cannot be deleted
until you unlock it.
Playing Voice Records
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to play.
3 To stop the voice record while it is playing, press
O.
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to lock or
unlock.
3 Press m.
4 Select Lock to lock the message. -or-
Select Unlock to unlock the message.
When a voice record is locked, this icon R appears
next to it.
128
Voice Records
2 With [New VoiceRec] highlighted, press A
under Memory. -or-
Deleting Voice Records
Deleting a voice record from the voice record list
deletes it from all parts of your phone, including the
media center.
With any voice record highlighted, press m.
Select Memory.
To free memory by deleting all unlocked voice
records:
Deleting a Voice Record
1 From the main menu, select VoiceRecord.
2 Scroll to the unlocked voice record you want to
delete.
1 From the voice records memory screen, press
A under Delete.
2 Press O or A under Yes to confirm.
3 Press m.
4 Select Delete.
5 Press O or A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store messages, Java application data,
and all items accessible through the
media center. Deleting some of these
other items frees memory for voice
records.
Deleting All Voice Records
1 From the main menu, select VoiceRecord.
2 Scroll to any voice record.
3 Press m.
4 Select Delete All.
5 Press O or A under Yes to confirm.
Managing Memory
To view the amount of memory available for voice
records:
1 From the main menu, select VoiceRecord.
129
To set your phone to vibrate instead of making a
sound when you receive Private calls, group calls,
and SDG calls, even if you want your phone to ring
for other features:
Customizing Your Phone
Setting the Volume
1 From the main menu, select Settings > 2-Way
Radio > Alert Type.
Of the Earpiece and Speaker
1 From the main menu, select Settings > Volume.
2 Scroll to Earpiece to set the earpiece volume.
-or-
Tip: If Alert Type does not appear: From the
main menu, select Ring Tones. Make sure
VibeAll is set to Off. Repeat step 1.
Scroll to Speaker to set the speaker volume.
3 To set the volume:
2 Select Vibrate to set your phone to vibrate.
Tip: Select Silent in step 2 to set your phone to
neither vibrate nor make a sound.
Scroll left or right. -or-
Press the volume controls.
Of the Ringer
Changing the Look of Your
Phone
Press the volume controls.
Wallpaper
A wallpaper is an image that appears on the idle
screen.
Setting Your Phone to Vibrate
To set your phone to vibrate instead of making a
sound when you receive phone calls, Private calls,
group calls, SDG calls, call alerts, message
notifications, pictures sent using Send via PTT,
and Datebook reminders, see “Setting Your Phone
to Vibrate” on page 67.
Choosing a Wallpaper
1 From the main menu, select Settings >
Display/Info > Wallpaper > Wallpaper.
Note: If you do not see Wallpaper as an option,
make sure Auto Cycle is set to Off.
2 Select the wallpaper you want.
130
Customizing Your Phone
Tip: If you want to see what the wallpaper looks
like, scroll to the wallpaper you want to view
and press A under View.
To set your phone to briefly display very large
digits when you enter numbers at the idle screen:
1 From the main menu, select Settings >
Display/Info > Large Dialing.
Setting Wallpaper to Change Automatically
2 Set this option to Large Digits.
Note: This feature may not be offered by your
service provider.
Setting the Menu View
You can set the items on your main menu and Java
applications menu to appear as large icons or a
list:
1 From the main menu, select Settings >
Display/Info > Wallpaper > Auto Cycle.
2 Select how often you want the wallpaper to
change.
3 Select Select Pictures.
4 Select the pictures you want to appear as
wallpaper.
1 From the main menu, select Settings >
Display/Info > Menu View. -or-
From the main menu: Press m. Select Main
Menu Setup > Menu View.
5 Press A under Done.
2 To choose a list, select List View. -or-
Setting Text Size
To set the size of the text on the internal display:
To choose large icons, select Icon View.
Setting the Backlight
A backlight lights the display and keypad when you
make or receive a call, open or close the flip, or
press keys or buttons.
1 From the main menu, select Settings >
Display/Info > Text Size.
2 Select the option you want:
•
•
•
Zoom — 11 characters per line
Standard — 14 characters per line
Compressed — 18 characters per line
To control how long the backlight stays on:
1 From the main menu, select Settings >
Display/Info > Backlight > Timer.
131
Airplane Mode—Temporarily Turning Off Calls
2 Select the number of seconds you want the
This icon Uappears.
backlight to stay on.
Note: While powering on your phone, you can
turn on Airplane mode by pressing p for
more than 5 seconds.
To control how long the backlight stays on for Java
applications:
1 From the main menu, select Settings >
Display/Info > Backlight > Java Timer.
To restore your phone’s ability to do all these
things:
2 Select the number of seconds you want the
backlight to stay on for Java applications.
Set this option to Off.
Using Settings
Settings contains many submenus that let you
customize your phone.
To set the keypad backlight to light up only in low
light conditions:
1 From the main menu, select Settings >
Display/Info > Backlight > Sensor.
2 Set this option to On.
For information on applying groups of settings to
your phone together, see “Profiles” on page 137.
Airplane Mode—Temporarily
Turning Off Calls
Sometimes you may want to have your phone on,
but turn off its ability to make and receive calls,
such as when you are on an airplane.
Display/Info Features
The Display/Info menu controls how the keypad
and display appear:
•
Wallpaper — changes the wallpaper that
appears on the idle screen.
•
•
•
Text Size — sets the size of text on the display.
To set your phone so that it cannot make or receive
phone calls, Private calls, or group calls; or transfer
data:
Theme — changes the look of the display.
Home Icons — controls whether main menu
icons appear on the idle screen.
1 From the main menu, select Settings >
Advanced > Airplane Mode.
2 Set this option to On.
•
Backlight — controls backlight illumination.
132
Customizing Your Phone
•
•
Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
•
•
•
Flip Activation — See “Setting Flip Actions” on
page 54.
Minute Beep — causes a beep to sound every
minute of an active call.
Menu View — controls whether the items on
your main menu and Java applications menu
appear as large icons or a list.
Call Duration — causes the duration of a call to
appear on the display when the call ends.
•
•
Large Dialing — sets large digits to appear on
the idle screen when you enter a number.
•
•
TTY — See “Making TTY Calls” on page 56.
Notifications — See “Message Notifications” on
page 73.
Language — sets the language that your phone
displays.
2-Way Radio Features
The 2-Way Radio menu controls how your phone
handles Private calls, group calls, and SDG calls:
Phone Calls Features
The Phone Calls menu controls how your phone
handles phone calls:
•
Tkgrp Silent — controls whether you hear
group calls to your Talkgroup. See “Group Calls”
on page 59.
•
•
•
Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
Any Key Ans — If this feature is on, you can
answer calls by pressing any key on the keypad.
•
•
•
Tkgrp Area — lets you define your Talkgroup
area.
Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
One Touch PTT — See “Setting Flip Actions” on
page 54.
•
•
Call Waiting — See “Call Waiting” on page 50.
Alert Type — controls how your phone notifies
you when you receive Private calls, group calls,
and SDG calls.
Auto Ans — sets your phone to automatically
answer an incoming call after a specified
number of rings. When this feature is on, the
phone answers by connecting you to the caller;
it does not send the call to voice mail, unless
you are out of coverage or on the line.
•
PTT Picture— sets your phone’s ability to send
and receive pictures in Private calls. See “Using
Send via PTT” on page 97.
133
Using Settings
•
Power Up — sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Personalize Features
The Personalize menu makes main menu items
easier to access.
•
Menu Options — Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps lets you create a shortcut to a Java
application on the main menu.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
•
•
•
Line 1 — sets ringer volume for phone line 1.
•
•
Up Key — sets the main menu item you access
when you scroll up from the idle screen.
Line 2 — sets ringer volume for phone line 2.
Messages — sets the volume of message
notifications and Datebook reminders.
Down Key — sets the main menu item you
access when you scroll down from the idle
screen.
•
•
•
•
Earpiece — sets the volume of sound coming
out of the earpiece.
•
•
Left Key — sets the main menu item you access
when you scroll left from the idle screen.
Right Key — sets the main menu item you
access when you scroll right from the idle
screen.
Speaker — sets the volume of sound coming
out of the speaker.
Keypad — sets the volume of sound associated
with pressing keys and buttons.
•
•
Center Key — sets the main menu item you
access when you press O from the idle screen.
Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
Left Softkey — sets the main menu item you
access when you press the left option key from
the idle screen.
•
•
Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speaker.
•
Right Softkey — sets the main menu item you
access when you press the right option key from
the idle screen.
Data — sets the volume of sounds that notify
you that you are receiving a circuit data call.
134
Customizing Your Phone
Security Features
Advanced Features
The Security menu lets you turn security features
on and off and change passwords:
The Advanced menu contains advanced and rarely
used Settings features.
•
Phone Lock — turns on a feature that locks
your phone: Lock Now takes effect immediately;
Auto Lock takes effect when your phone is
powered off and then on. An unlock code is
required to enable this feature, to unlock the
phone, and to set a new unlock code. Contact
your service provider for your default unlock
code.
•
Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
message notification, call alert, or Datebook
reminder.
•
•
Headset/Spkr — sets headset option. See
“Using a Headset” on page 144.
Disco Lights — sets the lights in the external
display to light up when a musical ring tone
sounds.
•
•
•
•
Keypad Lock — locks the phone’s keypad,
either immediately or automatically after a set
period of inactivity.
Note: Some musical ring tones you download to
your phone may not activate disco lights.
SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 14.
•
•
Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of your service provider; Master Reset
lets your service provider reset your service in
the event of a security or provisioning problem.
Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of your service provider.
GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 123.
Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
135
Using Settings
•
Return to Home — After Phone controls how
long the recent calls list displays after phone
calls; After Prvt controls how long the recent
calls list displays after Private calls.
•
•
Airplane Mode — prevents your phone from
making or receiving phone calls, Private calls,
group calls, or SDG calls; or transferring data.
Phone Only — prevents your phone from
making or receiving Private calls, group calls, or
SDG calls; or transferring data.
Note: This feature may not be offered by your
service provider.
•
Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer,
PC, or similar device.
136
Viewing Profiles
Profiles
A profile is a group of settings saved together so
that you can apply them to your phone easily.
1 From the main menu, select Profiles.
A profile contains these settings:
Tip: The profile that is currently in effect on your
•
•
•
Ring Tones — sets all options described in
“Ring Tones” on page 67, except assigning ring
tones to Contacts.
phone has a checkmark next to it.
3 Press A under View.
4 Scroll to view settings.
Display/Info — sets Wallpaper, Theme, Text
Size, and Backlight options. See “Display/Info
Features” on page 132.
Switching Profiles
To apply a profile to your phone:
Phone Calls — sets Set Line and Auto
Answer options. See “Phone Calls Features” on
page 133.
1 From the main menu, select Profiles.
2 Scroll to the profile you want to apply.
3 Press O.
•
•
Volume — sets all options described in “Volume
Features” on page 134.
Call Filter — controls which calls, call alerts,
and message notifications your phone responds
to. See “Setting Call Filtering” on page 140.
Advanced — sets headset option. See “Using a
Headset” on page 144.
The profile you selected is now in effect.
How Changing Settings
Affects Profiles
•
Many of the settings contained in profiles can be
set without switching or editing profiles — for
example, by selecting Settings or Ring Tones to
set options, or by setting the volume of the phone’s
ring using the volume controls.
Your phone arrives with preset profiles. You can
also create your own profiles.
137
Temporary Profiles
When you do this, your phone either:
Temporary Profiles
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
•
Updates the profile in effect to reflect these
changes, without notifying you -or-
•
Creates a temporary profile that contains these
changes
Note: This feature may not be offered by your
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
service provider.
To set your phone to create a temporary profile
that contains changes you make to settings:
1 From the main menu, select Profiles.
2 Press m.
3 Select Setup > Temp Profile.
4 Set this option to On.
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles, switch between
MOTOtalk and network mode, or power off your
phone.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp Profile to Off in step 4.
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
If your service provider does not offer the Temp
Profile option, your phone always updates the
profile in effect to reflect the changes you make to
settings.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on
have an asterisk in front of them.
138
Profiles
3 Enter the name you want to give the profile.
Storing a Temporary Profile
When you are finished, press O.
To store a temporary profile as a new profile:
4 If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
want to base this profile on. If you do not choose
a profile to copy from, the new profile is based
on a default profile.
1 From the main menu, select Profiles.
2 Scroll to the temporary profile.
3 Press m.
4 Select Store As New.
5 Enter the name you want to give the profile.
5 Press A under Create.
6 Scroll through the list of options and set their
When you are finished, press O.
values.
To overwrite the profile the temporary profile is
based on:
7 Press A under Done.
1 From the main menu, select Profiles.
2 Scroll to the temporary profile.
3 Press m.
Editing Profiles
1 From the main menu, select Profiles.
2 Scroll to the profile you want to edit.
3 Press m.
4 Select Edit.
5 Scroll through the list of options and set their
values.
4 Select Store Changes.
The temporary profile is stored with the name of
the profile it is based on. The profile it is based on,
as it existed before you made changes to settings,
is gone.
Deleting Profiles
To delete a profile:
Creating Profiles
1 From the main menu, select Profiles.
1 From the main menu, select Profiles.
2 Select [New Profile]. -or-
2 Select the profile you want to delete.
Scroll to any profile. Press m. Select New.
139
Setting Call Filtering
Note: A temporary profile is automatically
deleted when the profile it is based on is
deleted.
•
•
All Contacts sets your phone to notify you
only of phone calls from numbers stored in
Contacts.
Some Contacts sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
3 Press m.
4 Select Delete.
5 Press O or press A under Yes to confirm.
3 If you set the Phone option to Some Contacts,
select up to 5 Contacts entries that contain
phone numbers you want to be notified of calls
from.
To delete all profiles:
1 From the main menu, select Profiles.
2 Press m.
3 Select Delete All.
When you are finished, press A under Done.
4 To set filtering options for Private calls and group
calls, select Prvt/Grp.
4 Press O or press A under Yes to confirm.
•
•
Off sets your phone to notify you of all Private
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which
it ignores.
calls and group calls.
On sets your phone to ignore all Private calls
and group calls.
5 To set filtering options for SDG calls, select
SDGC.
•
To set call filtering:
Off sets your phone to notify you of all SDG
calls.
On sets your phone to ignore all SDG calls.
1 While setting options for a profile, select Call
Filter.
•
2 To set filtering options for phone calls, select
Phone.
6 To set filtering options for call alerts, select
Alerts.
•
•
Off sets your phone to notify you of all phone
•
•
Off sets your phone to notify you of all call
calls.
alerts.
All sets your phone to ignore all phone calls.
On sets your phone to ignore all call alerts.
140
Profiles
7 To set filtering options for message notifications,
select Notifications.
•
Off sets your phone to notify you of all
messages.
•
Voice Messages sets your phone not to
sound a tone or vibrate when you receive
voice messages.
•
•
Text Messages sets your phone not to sound
a tone or vibrate when you receive text
messages.
All sets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate,
the message notification screen appears
as usual.
8 Press A under Done.
141
6 Press O.
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad (1 through 9) or
saying the voice name of the shortcut. You create
the shortcut and then use it to take you to that
screen any time.
7 If you want to record a voice name for the
shortcut: Select Voice. As directed by the
screen prompts, say and repeat the name you
want to assign to the number. Speak clearly into
the microphone.
8 Press A under Done.
9 If the number key you chose is already assigned
to a shortcut, a prompt appears asking if you
want to replace the existing shortcut.
Creating a Shortcut
Note: When you receive your phone, all number
keys may already be assigned to
shortcuts. If this is the case, you can
create new shortcuts by deleting or
replacing existing shortcuts.
Press A under Yes to replace the existing
shortcut. -or-
Press A under No if you want to keep the
existing shortcut and assign another number key
to the shortcut.
1 Go to the menu item you want to create a
shortcut for.
Using a Shortcut
If you know the shortcut number:
For example, if you want to create a shortcut to
the screen for creating a new Contacts entry:
From the main menu, select Contacts, then
highlight [New Contact].
1 From the idle screen, press m.
2 On your keypad, press the number assigned to
the shortcut.
2 Press and hold m until a confirmation screen
appears.
If you do not know the shortcut number:
3 Press O or press A under Yes.
4 Select Key.
1 From the main menu, select Shortcuts.
5 Press the number key you want to assign to the
shortcut.
2 Scroll to the shortcut you want to use. -or-
142
Shortcuts
If you assigned a voice name to the shortcut:
Press and hold t. Say the voice name into
your phone. The shortcut with that voice name is
then highlighted.
4 With Key or Voice highlighted, press O to
change assignments.
Deleting Shortcuts
To delete a shortcut:
3 Press O.
1 From the main menu, select Shortcuts.
2 Scroll to the shortcut you want to delete.
3 Press m.
4 Select Delete.
5 Press O or press A under Yes to confirm.
Editing a Shortcut
To change the number assigned to a shortcut:
1 From the main menu, select Shortcuts.
2 With any shortcut highlighted, press m.
3 Select Reorder.
4 Scroll to the shortcut you want to move.
5 Press A under Grab.
6 Scroll to the place where you want the shortcut
to appear.
7 Press A under Insert.
To delete all shortcuts:
1 From the main menu, select Shortcuts.
2 With any shortcut highlighted, press m.
3 Select Delete All.
4 Press O or press A under Yes to confirm.
8 Repeat step 4 through step 7 for all the items
you want to move.
9 Press A under Done.
To change the number or voice name assigned to
a shortcut:
1 From the main menu, select Shortcuts.
2 Highlight any shortcut.
3 Press A under Edit.
143
Using a Remote PTT Button
If you are using a headset or other accessory with
button for phone calls, Private calls, group calls,
and SDG calls.
Using a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time:
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
Hold the remote PTT button for less than 2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -or-
Select Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
For Private calls, group calls, and SDG calls, use
the remote PTT button as you would the PTT
button on your phone.
Note: If you are using your phone with a
headset, and you have the Flip to End
option set to On, closing your flip sends
incoming sound to the headset and does
not end the call. See “Setting Flip Actions”
on page 54.
Note: When using a headset, the PTT button on
your phone works the same way as when
you are not using a headset. Sounds
associated with Private calls, group calls,
and SDG calls are heard through the
headset.
Attaching a Headset
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
144
Status
Message Description
Understanding Status
Messages
Messages
The system is experiencing heavy
traffic. Please try again later.
System Busy
You may receive status messages under certain
conditions. Before contacting Customer Care, note
the message, numeric code, and the conditions
under which it appeared. The following table lists
and describes the status messages.
This service cannot be enabled
because an incompatible service has
already been turned on.
Service Conflict
An error occurred. Please try again.
Please Try
Again
Status
Messages
Message Description
SIM PIN
incorrect. Try
again.
You have entered an incorrect PIN
number.
The number that you entered is not
valid.
Number Not in
Service
You have inserted a SIM card that will
not work with your service provider’s
phone. Contact Customer Care if you
believe this is a valid SIM card.
Please Enter
Special Code
The phone that you called is either
busy, out of coverage, or turned off.
Please try again later.
User Not
Available
A fault was detected with your phone.
If this error recurs, note the error code
and contact Customer Care.
The person that you called has not
purchased this service.
Self Check Error
+ Number Code
User Not
Authorized
This service is temporarily not
available. Please try again later.
Please Try Later
An operational fault was detected with
your phone. Note the numeric code,
turn your phone off, and contact
Customer Care.
Self Check Fail
+ Number Code
This service was restricted by your
service provider, or this service was
not purchased.
Service
Restricted
You are either out of coverage or
having problems with provisioning.
Service Not
Available
145
Status
Messages
Message Description
Status
Messages
Message Description
The incorrect PIN was entered 3
consecutive times. You will be unable
to place or receive calls on your
phone. Contact Customer Care to
have them obtain the PIN Unblock Key
(PUK) code.
Searching for GPS satellites.
PIN Blocked
Call Your
Provider
Scanning for
Satellites
Could not find GPS satellites.
Unable to
Locate Sats
A problem occurred in your phone’s
GPS circuitry. If this error occurs,
contact Customer Care.
Technical Error
Your SIM card is not being detected.
Please check to ensure that you have
inserted the SIM card correctly into
your phone.
Insert SIM
Please enter your 4- to 8- digit SIM
PIN code.
Enter SIM PIN
Auto Phone Lock is activated. Enter
your unlock code.
Enter Unlock
Code
Warns of low memory for Net Alerts.
New Browser
Message
Memory Full!
Hardware
Failure
A problem occurred in your phone’s
camera. If this error occurs, contact
your service provider.
Resource Not
Available
Your phone’s camera is temporarily
unavailable for use. Please try again
later.
146
•
•
United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
•
•
•
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
RF Operational
Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used
to sustain connection to the wireless network, and
a receiver which enables you to receive
communication and connection information from
the network.
Ministry of Health (Canada). Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
•
•
Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
ANATEL, Brasil Regulatory Authority, Resolution
303 (July 2, 2002) "Regulation of the limitation of
exposure to electrical, magnetic, and
electromagnetic fields in the radio frequency
range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2,
2002."
Portable Radio Product
Operation and EME Exposure
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
147
Portable Radio Product Operation and EME Exposure
To assure optimal radio product performance
and make sure human exposure to radio
frequency electromagnetic energy is within the
guidelines set forth in the above standards,
always adhere to the following procedures:
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the
lips.
Phone Operation
Body-worn operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your
body when transmitting, always place the radio
product in a Motorola approved clip, holder,
holster, case or body harness for this product.
Use of non-Motorola-approved accessories may
exceed FCC RF exposure guidelines. If you do
not use a Motorola approved body-worn
accessory and are not using the radio product
in the intended use positions along side the
head in the phone mode or in front of the face
in the two-way radio mode, then ensure the
antenna and the radio product are kept the
following minimum distances from the body
when transmitting
Two-way radio operation
Your radio product has been designed and tested
to comply with national and international standards
and guidelines regarding human exposure to RF
electromagnetic energy, when operated in the
two-way mode (at the face, or at the abdomen
when using an audio accessory) at usage factors
of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50%
of the time. To transmit (talk), push the
Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the
time or less, is important because this radio
generates measurable RF energy only when
transmitting (in terms of measuring for standards
compliance).
•
Phone or Two-way radio mode: one inch (2.5
cm)
•
Data operation using any data feature with or
without an accessory cable: one inch (2.5
cm)
148
Safety and General Information
ALL MODELS WITH FCC ID AZ489FT5844 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.05 W/kg and when tested on the body, as
described in this user guide, is 1.15 W/kg during packet
data transmission. (Body-worn measurements differ
among phone models, depending upon available
accessories and FCC requirements.)2
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5844.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
1
1.6W/kg. Tests for SAR are conducted using standard
operating positions reviewed by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
1 In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
2
The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
149
Electromagnetic Interference/Compatibility
Antenna Care
Facilities
Use only the supplied or an approved
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
DO NOT hold the antenna when the radio
product is “IN USE”. Holding the antenna affects
call quality and may cause the radio product to
operate at a higher power level than needed.
Aircraft
When instructed to do so, turn off your radio
product when on board an aircraft. Any use of a
radio product must be in accordance with
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.motorola.com/iden.
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
Electromagnetic
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum
separation of 6 inches (15 cm) be maintained
between a handheld wireless radio product and a
pacemaker. These recommendations are
consistent with those of the U.S. Food and Drug
Administration.
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Persons with pacemakers should:
•
ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
150
Safety and General Information
•
•
Not carry the radio product in a breast pocket.
•
•
•
Give full attention to driving and to the road.
Use hands-free operation, if available.
Pull off the road and park before making or
answering a call if driving conditions so require.
Use the ear opposite the pacemaker to minimize
the potential for interference.
•
Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Operational Warnings
!
Hearing Aids
For Vehicles with an Air
Bag
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives. For more
Hearing Aid Compatibility information, see
“Hearing Aid Compatibility” on page 155.
Do not place a portable radio product in the area
over the air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air
bag inflates, the radio product may be propelled
with great force and cause serious injury to
occupants of the vehicle.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any
area with a potentially explosive atmosphere,
unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved).
Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
When using the radio product while driving, please:
151
Operational Cautions
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such
as grain, dust or metal powders, and
any other area where you would
normally be advised to turn off your
vehicle engine. Areas with potentially
explosive atmospheres are often but
not always posted.
charged battery, particularly when placing it inside
a pocket, purse, or other container with metal
objects. To reduce the risk of injury, batteries
should not be exposed to fire, disassembled, or
crushed.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
Blasting Caps and Areas
If your radio product interior gets wet, then do not
try to accelerate drying with the use of an oven or a
dryer as this will damage the radio product and
void the warranty. Instead, do the following:
To avoid possible interference with blasting
operations, turn off your radio product when you
are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
from radio product.
Operational Cautions
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5 Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
!
Batteries
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
152
Safety and General Information
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
•
Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
Clean the external surfaces of the radio product
with a damp cloth, using a mild solution of
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Warning: To reduce the risk of injury,
charge only the rechargeable
!
batteries described in “Battery” on
page 3. Other types of batteries may
burst, causing personal injury and
damage.
•
To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
Accessory Safety Information
Important: Save these accessory safety
instructions.
•
•
Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
•
Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
•
•
Use of a non-recommended attachment to a
battery charger may result in a risk of fire,
electric shock, or injury to persons.
Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
153
Accessory Safety Information
•
An extension cord should not be used with any
battery charger unless absolutely necessary.
Use of an improper extension cord could result
in a risk of fire and electric shock. If an extension
cord must be used, make sure that:
•
•
The disconnection from the line voltage is
made by unplugging the power supply from
the AC receptacle.
To reduce risk of electric shock, unplug any
battery charger from the outlet before
attempting any maintenance or cleaning.
•
The pins on the plug of the extension cord are
the same number, size, and shape as those
on the plug of the charger.
For optimum charging performance, turn off the
radio product while charging it in any battery
charger.
•
•
•
The extension cord is properly wired and in
good electrical condition.
The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
•
Do not disassemble a battery charger; take it
to a qualified service technician when service
or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
•
•
Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
The output power from the power supply or
transformer must not exceed the rating given
on the Desktop Dual-Pocket Charger.
154
Hearing Aid Compatibility
Results will vary depending on the user’s hearing
device and individual type and degree of hearing
loss. If a hearing device is particularly vulnerable to
interference noise, even a mobile phone with a
higher rating may still cause unacceptable noise
levels in the hearing device. Evaluate your
personal needs by trying out the mobile phone with
your hearing device.
Hearing Aid
Compatibility
When some mobile phones are used with certain
hearing devices (including hearing aids
andcochlear implants), users may detect a noise
which can interfere with the effectiveness of the
hearing device.
“M” Rating: Mobile phones rated M3 or M4 meet
FCC requirements for hearing aid compatibility and
are likely to generate less interference to hearing
devices than phones that are not labeled. (M4 is
the “better” or higher of the two ratings.)
Some hearing devices are more “immune” than
others to this interference noise, and mobile
phones can also vary in the amount of interference
noise they may generate at any given time. ANSI
standard C63.19 was developed to provide a
standardized means of measuring both mobile
phone and hearing devices to determine usability
rating categories for both.
"T" Rating: Mobile phones rated T3 or T4 meet
FCC requirements for compatibility with
telecoil-type ("T Switch" or "Telephone Switch")
hearing devices and are likely to be more usable
with such hearing devices than unrated phones.
(T4 is the "better" or higher of the two ratings.)
Ratings have been developed for mobile phones to
assist hearing device users find phones that may
be compatible with their particular hearing device.
Not all mobile phones are rated for compatibility
with hearing devices, but mobile phones that are
rated should have the rating available. This rating
may depend on the position of a retractable
antenna.
Hearing devices may also be measured for
immunity to interference noise from mobile phones.
In some cases, hearing devices can be modified or
“hardened” to improve operation with a mobile
phone. Your hearing device manufacturer or
hearing health professional may help you improve
the interaction of your mobile phone and hearing
device. Not all hearing devices are rated for
compatibility with mobile phones, but hearing
devices that are rated should have the rating
155
available. Be sure to evaluate your personal needs
by trying out this mobile phone with your specific
hearing device, using both antenna positions if
equipped with a retractable antenna.
More information about hearing aid compatibility
may be found at:
http://commerce.motorola.com/consumer/QWhtml/
accessibility/default.html, www.fcc.gov,
www.fda.gov, and www.accesswireless.org.
156
MOTOROLA LIMITED
WARRANTY
PRODUCTS
COVERED
LENGTH OF
COVERAGE
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
What Does this Warranty Cover?
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these
Products ("Software") to be free from defects in
materials and workmanship under normal
consumer usage for the period(s) outlined below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new
Products, Accessories and Software
Accessories as
defined above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Products or
The balance of the
Accessories that are original warranty or
Repaired or Replaced. for ninety (90) days
from the date returned
to the consumer,
whichever is longer.
Software as defined
Ninety (90) days from
purchased by consumers in the United States
or Canada, which are accompanied by this
written warranty:
above. Applies only to the date of purchase.
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or
floppy disk).
157
What is not covered? (Exclusions)
Use of Non-Motorola Products and
Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified
Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Ornamental Decorations. Ornamental
decorations such as emblems, graphics,
rhinestones, jewels, gemstones and their settings,
and other decorative elements, are excluded from
coverage.
Unauthorized Service or Modification. Defects
or damages resulting from service, testing,
adjustment, installation, maintenance, alteration,
including without limitation, software changes, or
modification in any way by someone other than
Motorola, or its authorized service centers, are
excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
excluded from coverage.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software
due to any communication service or signal you
may subscribe to or use with the Products,
Accessories or Software is excluded from
coverage.
158
MOTOROLA LIMITED WARRANTY
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the
Or visit us online at
http://www.motorola.com/iden/support
You will receive instructions on how to ship the
Products, Accessories or Software, at your
expense, to a Motorola Authorized Repair Center.
To obtain service, you must include: (a) a copy of
your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the
problem; (c) the name of your service provider, if
applicable; (d) the name and location of the
installation facility (if applicable) and, most
importantly; (e) your address and telephone
number.
internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to
the first consumer purchaser, and is not
transferable.
What will Motorola Do? Motorola, at its option,
will at no charge repair, replace or refund the
purchase price of any Products, Accessories or
Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software
or applications added to your Product, Accessory
or Software, including but not limited to personal
contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software
and applications please create a back up prior to
requesting service.
What Other Limitations Are There? ANY
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS
159
THE EXCLUSIVE REMEDY OF THE
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies
of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with,
the Products associated with such Motorola
software. No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
CONSUMER, AND IS PROVIDED IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL MOTOROLA BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, ACCESSORY OR SOFTWARE, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
160
Limited Warranty Motorola Communication Products (International)
Rechargeable Batteries will be replaced during the
Limited Warranty
Motorola
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
Communication
Products (International)
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
Note: This Warranty applies in Singapore and
the Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products
listed below (“Product”) against defects in material
and workmanship under normal use and service
for a period of time from the date of purchase as
scheduled below:
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for
additions or modifications to this warranty unless
made in writing and signed by an officer of
MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the original
end user purchaser, MOTOROLA does not warrant
the installation, maintenance or service of the
Product.
iDEN Subscriber Digital Mobile and One (1) Year
Portable Units
Product Accessories
(manufactured by or under license
from MOTOROLA)
One (1) Year
Batteries
One (1) Year
161
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
equipment if expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole, or any portion of the system not
produced by MOTOROLA, under this warranty.
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
III. How to Get Warranty
Service:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be provided
by MOTOROLA through one of its authorized
warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer
or communication service provider), it can facilitate
your obtaining warranty service.
II. General Provisions:
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the
Product, Repair, replacement or refund of the
purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
162
Limited Warranty Motorola Communication Products (International)
b. Defects or damage from misuse, accident,
water, or neglect.
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
c. Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
d. Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
j. Scratches or other cosmetic damage to
Product surfaces that does not effect the
operation of the Product.
k. Normal and customary wear and tear.
e. A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
l. Exclusion for defects or damage arising from
use of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
f. Product which has had the serial number
removed or made illegible.
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or
parts infringe a patent, and Motorola will pay those
costs and damages finally awarded against the
end user purchaser in any such suit which are
attributable to any such claim, but such defense
and payments are conditioned on the following:
g. Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by
charging or using the battery in equipment
or service other than the Product for which it
is specified.
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized
alteration of the software/firmware in the
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
Product, does not function in accordance with
163
settlement or compromise; and
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product may
not be replaced, copied, distributed, modified in
any way, or used to produce any derivative thereof.
No other use including, without limitation,
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at
its option and expense, either to procure for
such purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA
software or exercise or rights in such MOTOROLA
software is permitted. No license is granted by
implication, estoppel or otherwise under
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In
no event shall MOTOROLA be liable for any
incidental, special or consequential damages
arising from any claim of patent infringement or
alleged infringement.
MOTOROLA patent rights or copyrights.
164
Software Copyright Notice
Patent and Trademark
Information
The Motorola products described in this manual
may include copyrighted Motorola and third party
software stored in semiconductor memories or
other media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. &
Tm. Off. © 2005 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic
Communications.
Furthermore, the purchase of the Motorola
products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software
provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation
of law in the sale of a product.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Java and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
All other product names or services mentioned in
this manual are the property of their respective
trademark owners.
165
door 3
Index
133
inserting 4
safety 152
Baud rate 136
emergency 23
ending 20
Numerics
2-way radio 133
entering number 21
from memo 66
from recent calls 35
group, see Group calls
international 52
making 19
see also Private calls, group
calls, SDG calls, and call
alerts
C
Call alerts 30
deleting 31
queue 30
3-way calling 51
A
receiving 30
responding 30, 31
sending 30
sorting 31
Accessories 18
on hold 51
phone calls 19
safety 153
Airplane mode 132
power button 6, 132
settings 136
status icon 12
turning on and off 132
Antenna 18
Private calls 19, 53, 133
receiving 20
redialing 22, 133
remote PTT 144
SDG, see SDG calls
Speed Dial 22
TTY, see TTY calls
Turbo Dial 22
voice name 21
with Quick PTT 53
viewing 31
Call filtering 140
Call forwarding 47
all calls 47
missed calls 48
off 48
Call Timers 54
Call Waiting 50
off 50
Audio recordings 90
playing 90
B
Backlight 132
Battery
Calls
Camera 82
see also pictures
care 6
charging 4, 5
3-way 51
answering automatically 133
166
Index
accessing 82
ring tones 37, 39
searching 43
showing all entries 43
showing only Private IDs 43
SIM card 37
storing fast 40
storing from idle screen 40
storing from Memo 40, 66
storing from recent calls 34,
40
Drafts 79
see also MOSMS messages,
drafts
DRM
accessing during private calls
97
accessing from media center
92
picture options 82
setting up 85
count-based usage 93
default location 89
definition 93
deleting items 69, 92, 95, 113
expired items 95
taking pictures 82
Circuit data 56
Clock 133
Contact information
receiving 33, 100
Send via PTT 99
sending 99
gifting 89, 94
installing items 93
java applications 112
managing items 94
media center 89
renewing license 95
ring tones 69
type 37
voice name 40
with non-i850 phones 46
Contacts 37
D
accessing 38
capacity 44
creating entries 38
deleting 43
editing entries 41
icons 37
iDEN Phonebook Manager
45
international numbers 44
Datebook
sharing items 93
profiles 107
Digital rights management, see
DRM
Direct Launch 28
Display
status icons 89, 93
Tell-A-Friend 89, 94
time-based usage 93
viewing license information
94
backlight 132
options 9
screen 8
E
Email 38, 39, 56
167
Emergency calls 23
End key 2
DRM 112
memory 113
H
Handset, see phone
Headset 144
Hearing Aid Compatibility 155
K
F
Faxes
receiving 56
sending 56
Flip action 19, 20, 54
Keypad 2
locking 135
I
L
Icons
Language 133
Lists, see menus
Contacts 37
DRM 93
SDG 12, 64
status 11
G
GPS Enabled 117
almanac data 122
best results 121
emergency calls 23, 119
map software 124
privacy options 123
security 123
viewing location 120
GPS PIN 135
GPS, see GPS Enabled
Group calls 59, 133
making 60
M
Media center 87
audio recordings 90
deleting 91
text entry 70
voice records 127
iDEN Phonebook Manager 45
Idle screen 9
creating MOSMS messages
78
storing to Contacts 40
International numbers 52
calling 52
DRM items 89
forward locked 88
locking 91
memory 92
pictures 89
renaming 91
viewing 87
storing 44
Memo 66
J
off 60
receiving 60
calling from 66
creating 66
editing 66
Java applications
deleting 113
168
Index
storing to Contacts 40, 66
viewing 66
Memory
deleting 79, 80
drafts 79
memory 80
message center 77
quick notes 78
receiving 76
sending 77
switching to 24
switching to network mode 24
talk range 25
Java applications 113
media center 92
MOSMS messages 80
ring tones 69
Mute 23
My Info 102
editing 102
voice records 129
Menu key 2, 10
Menus 9
sent messages 79
setting up 76
sorting 80
receiving 32, 100
Send via PTT 99
sending 99, 103
viewing 102
context-sensitive 2, 10
main menu 10
SDG list 61
MOTOtalk
calls, ending 28
channels 25
N
Navigation key 2
Message center 73, 75
see also messages
MOSMS messages 77
Message notifications 73
setting options 73
Messages 73
channels, setting 25
code calls, making 26
code calls, receiving 26
codes 25
codes, setting 25
Direct Launch 28
emergency calls 28
private MOTOtalk calls 27
Private Only setting 27
receiving all calls 26
setup options 28
O
One Touch PTT 52
setting 52
turning off 53
Over-the-air programming 7
see also voice mail, MOSMS
messages, and SMS
messages
P
Packet data 56
Passwords 135
Patent information 165
receiving 73
MOSMS messages 76
creating 77
169
Pauses
dialing 52
storing 44
Phone 1, 8
creating 139
Datebook 107
deleting 139
creating MOSMS messages
78
editing 139
deleting 35
display time 136
My Info 32
pictures 34
storing to Contacts 34, 40
viewing 33
active line 133
flip action 19, 20, 54
locking 135
modem 55
off 7
on 6
only 136
setting up 2
switching 137
temporary 138
viewing 137
Programming, over-the-air 7
PTT
One Touch 52
One Touch, setting 52
One Touch, turning off 53
Quick 53
Redialing 22, 133
Ring tones 67
deleting 69
Pictures 89
downloading 69
DRM 69
in Contacts 37, 39
memory 69
off 67
setting 67
accessing the camera 82
Contacts 37, 39, 42, 84, 90
inserting in messages 84, 90
receiving 98
recent calls 34
Send via PTT 97
sending 90, 97
taking 82
PUK code 14
Q
Quick notes 78
see also MOSMS messages,
quick notes
Quick PTT 53
setting in Contacts 68
vibrate 67
R
Radio frequency 147
Recent calls 32
call alerts 32
viewing assigned 68
Ringer 130
Profiles 137
call filtering 140
changing settings 137
see also Ring tones
170
Index
off 130
see SDG calls
Send via PTT 97
see Pictures, sending
contact information 99
My Info 99
pictures 97
SDG lists 64
setting for pictures 99
Service, activating 6
Settings 132
default 13
entering 13
unblocking 14
SMS messages 73, 76
also see MOSMS messages
76
Speakerphone 22
Speed Dial 22, 38, 40
State Tone 29
S
Safety 147
accessory 153
battery 152
driving 173
electromagnetic interference
150
medical devices 150
radio frequency 147
Status messages 145
SDG calls
resetting 135
Shortcuts
icons 12, 64
lists, adding numbers 61
lists, creating 61
lists, deleting 62
lists, removing members 62
lists, sending 64
lists, storing faster 62
making 63
Quick PTT 53
receiving 64
settings 133
starting 63
T
T9 Text Input, see text entry
Talkgroups 59, 60, 133
joining 60
Text display area 9
Text entry 70
creating 142
deleting 143
editing 143
using 142
SIM card 3, 13, 15
Contacts 37
database 70, 71
icons 70
mode 70
inserting 15
removing 16
with non-i850 phones 46
SIM PIN 13, 135
changing 13
Word mode 70
Trademark information 165
TTY calls 56
Security 135
baud rate 57
171
making 56
mode 57
dialing 52
storing 44
on 57
Turbo Dial 22
Wallpaper 84, 90
Warranty 161
Word mode 70
V
Voice mail 73, 75
receiving 75
sending calls to 20, 75
setting up 48, 75
Voice name 21, 38
creating 40
Voice records 127
creating 127
deleting 129
icons 127
labelling 128
locking 128
memory 129
playing 128
viewing 127
Volume, setting 130, 134
W
Waits
172
•
•
•
Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you receive
an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
Driving Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the
powerful ability to communicate by voice — almost
anywhere, anytime, wherever wireless phone
service is available and safe conditions allow. But
an important responsibility accompanies that
benefits of wireless phones, one that every user
must uphold.
Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and even heavy traffic
can be hazardous.
If you receive an incoming call at an
When driving a car, driving is your first
responsibility. If you find it necessary to use your
wireless phone while behind the wheel of a car,
practice good common sense and remember the
following tips:
inconvenient time do not take notes or look up
phone numbers while driving. Jotting down a “to
do” list or going through your address book
takes attention away from your primary
responsibility — driving safely.
•
Get to know your Motorola wireless phone and
its features such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
•
•
Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
•
When available, use a hands-free device. If
possible, add an additional layer of convenience
to your wireless phone with one of the many
Motorola Original hands-free accessories
available today.
Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations which have
the potential to divert your attention away from
the road.
173
•
•
•
Your phone can perform many other functions
besides allowing you to make and receive calls.
Do not let these features distract you from
driving. Use them only when it is safe to do so.
Use your wireless phone to call for help. Dial
9-1-1 or other local emergency number in the
case of fire, traffic accident or medical
emergencies.
Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
•
Call roadside assistance or a special
non-emergency wireless assistance number
when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special
non-emergency wireless number.
174
|