TM
Motorola
iDEN® Digit a l P or t a b le
i1000 - Mu lt i-Ser vice Wea r a b le
Getting Started
June 17, 1998
68P81088C88-O
0
GETTING STARTED
i1000
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Call Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3-Way Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Alternate Phone Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the Active Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Receiving Calls on Your Second Line . . . . . . . . . . . . . . . . . 33
PRIVATE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
At First Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Group/Private Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Making a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Receiving a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Programming Your Private ID . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Recalling Your Private ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Call Alert™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Sending a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Receiving a Call Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Call Alert Stacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Receiving a Call Alert with Stacking . . . . . . . . . . . . . . . . . . 39
Responding to a Call Alert in the Stack . . . . . . . . . . . . . . . . 39
GROUP MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
At First Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Group/Private Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Making a Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing Talkgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Receiving a Group Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Area Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Talkgroup Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
VOICE MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Retrieving Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Viewing Voice Mail Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MESSAGE MAIL™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Receiving New Message Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Retrieving Stored/Unread Mail . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Saving and Erasing Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Auto Call Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Message Mail Memory Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ii
GETTING STARTED
i1000
PROGRAMMING MENU OPTIONS . . . . . . . . . . . . . . . . . 49
ERROR MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Battery Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . 59
Charging Lithium Ion Batteries . . . . . . . . . . . . . . . . . . . . . . 59
Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Installing the Travel Charger . . . . . . . . . . . . . . . . . . . . . . . . 60
Travel Charger Operating Specifications . . . . . . . . . . . . . . . 60
Vehicular Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Installing the Vehicular Battery Charger . . . . . . . . . . . . . . . 61
Removing the Vehicular Battery Charger . . . . . . . . . . . . . . . 62
Vehicular Battery Charger Operating Specifications . . . . . . 62
Desktop Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Desktop Battery Charger Troubleshooting . . . . . . . . . . . . . . 64
Audio Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Attaching/Detaching the Earpiece Microphone . . . . . . . . . . 65
Removing the Audio Adapter . . . . . . . . . . . . . . . . . . . . . . . . 65
SAFETY AND GENERAL INFORMATION . . . . . . . . . . . 67
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Cleaning Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
For Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Owner’s Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Private Number Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Talkgroup Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
GETTING STARTED
iii
i1000
Patent Information
This product is protected under one or more of the following
patents:
4817157, 4896361, 4857928, 5041793, 5060294, 5066923, 5134718,
5140156, 5239963, 5257411, 5287387, 5265219, 5289504, 5316168,
5317247, 5338396, 5389927, 5406588, 5424921, 5457376, 5460906,
5551063, 5557079, 5596487, 5615412, 5638403, 5559468, 5469465,
5170413, 5140615, 5519730, 5241544, 5584059, 5574992, 5396656,
5487091, 5533004, 5299199, 5343499, 5369501, 5509031, 5515379,
5528723, 5598417, 5066923, 5241650, 5278833, 5359696, 5548631,
5410632, 5440582, 5457735, 5457818, 5471670, 5477550, 5481537,
5566181, 5229767, 5208804, 5295140, 5381449, 5440590, 5467398,
5490230, 5620242, 5623523, 5655913
Trademarks
, Motorola, VibraCall, Call Alert, and Message Mail are trademarks or
registered trademarks of Motorola, Inc.
iDEN is a registered trademark of Motorola, Inc.
®Reg. U.S. Pat. & Tm. Off.
All other trademarks mentioned in this manual are trademarks of their
respective companies.
Important!
Be sure to read “Safety and General Information” on
page 67 before using your i1000 Portable.
© Copyright 1998, Motorola, Inc. All rights reserved.
iv
GETTING STARTED
i1000
YOUR i1000 PORTABLE
ongratulations on purchasing your Motorola iDEN i1000
multi-service digital portable. Superior features and state-of-
Cthe-art technology help to keep you in constant touch with all
of your business and personal contacts.
The sleek, compact design of the i1000 portable:
• Makes it easy to wear or to carry in your pocket or purse.
• Provides a speakerphone feature for placing hands-free
incoming and outgoing phone calls.
• Includes a protective cover that, when open, provides a
comfortable earpiece.
The i1000 portable offers the following functions:
Phone
Pr ivat e
Gr oup
Voice Mail
Mes s age Mail
ABO UT YO UR PO RTABLE’S FEATURES
You can use various features of your portable with the cover open or
closed. Look for special operating instructions in this manual.
This manual describes the features that most people use every day.
However, your service provider or organization might have
customized the portable for your individual needs. For more
information, check with your service provider or organization.
Additional information for your iDEN Digital Portable
can be found on the Motorola iDEN web site at:
http://www.mot.com/LMPS/iDEN
GETTING STARTED
1
i1000
FEATURES O F YO UR i10 0 0
1. Antenna
2. On/Off Key
3. LED
4. Speaker Key
12. Earpiece
5. Volume
Control
Buttons
6. Push-To-Talk
(PTT) Button
8. Flip Cover
(Open)
7. Option Keys
8. Flip Cover
(Closed)
13. Alphanumeric
Display
9. Menu Key
7. Option Key
10. Mode Key
7. Option Key
14. SEND/END Key
15. Scroll Key
MENU
a bc
2
jkl
5
16. Alphanumeric
Keypad
tuv
8
0
17. Microphone
11. Speaker
18. Accessory Connector
N O T E
Remove the three plastic film lens protectors from the
display and cover before initial use.
2
i1000
GETTING STARTED
1. Antenna
2. On/Off Key
3. LED
Extend for optimal signal.
Press to turn your portable on or off.
Check the i1000Õs status. See page 6 for
more information.
4. Speaker Key
Press to set incoming calls through either the
earpiece or the speaker during Group and
Private calls.
5. Volume Control
Buttons
Press to adjust volume levels.When using the
List menu option, press to scroll forward and
backward.
6. Push-To-Talk (PTT)
Button
Transmit a Group or Private Call, or a Call
Alert. Press and hold the PTT button to talk;
release it to listen.
7. Option Keys
Press to select a menu option on the display
that appears directly above the left or right
option key.
8. Cover
Protect the keypad.
9. Menu Key
10. Mode Key
Press to scroll through menu options.
Press to change between Phone, Group, and
Private modes.
11. Speaker
12. Earpiece
Listen to Group and Private (high-audio)
conversations. Listen to Phone calls in
Speakerphone mode.
Hold to your ear to listen during Phone calls
and Group/Private (low-audio) conversations.
Listen to calls when the speakerphone is
turned off.
13. Alphanumeric
Display
View up to four lines (up to 12 characters per
line) on the display.
14. Send/End Key
Press to answer an incoming Phone call.
After entering a phone number, press to
begin an outgoing Phone call or to redial the
entered phone number.
Press to end Phone calls.
15. Scroll Key
Press the left side to scroll backward or the
right side to scroll forward through menu
options and lists.
16. Alphanumeric
Keypad
Enter telephone numbers, Private call IDs,
and alphanumeric characters.
17. Microphone
Use to speak during outgoing calls.
Use to connect accessories.
18. Accessory
Connector
GETTING STARTED
3
i1000
BATTERY
Charging the Battery
To get the maximum use from the battery, charge it for at least three
hours before you use it for the first time.
Attach the charger connector to the i1000 then connect the adapter
to an electrical outlet. For more information about chargers, see
“Accessories” on page 57.
Attaching the Battery
To attach the battery to your i1000,
align the battery as shown and press
down on the battery until you hear a
click.
Detaching the Battery
To detach the battery, press the latch
to release the battery and slide the
battery downward.
Latch
Battery and Charging Status
A low battery is indicated by a short, chirp-like sound through the
speaker. The battery strength icons display battery level
information, as shown below. The battery indicators show the
battery level during both operation and charging.
Low
0-30%
31-60%
61-90%
90-100%
Battery -
Icon
ßashes
4
i1000
GETTING STARTED
D ISPLAY ICO N S
After you turn on the portable and use various features, icons appear
on the screen to inform you of existing conditions.
Some of the following icons may appear along the top of the display.
Signal Strength Indicator
Shows the signal strength. Six bars indicate the
strongest signal. Calls and messages may not be
sent or received in weak signal areas.
Battery Strength Indicator
Shows the remaining charge in your battery. Three
bars show full charge. The indicator flashes when
you have less than five minutes of talk time
remaining.
Voice Mail
Indicates that unplayed messages are waiting in
your voice mail box
New Message Mail
Indicates that you have new text messages in your
mail box.
Unread Message Mail
Indicates that you have unread Message Mail.
Vibrate All
Indicates that the Vibrate All option is turned on.
You will not hear a ring tone.
Call Forward/Active Line Indication
Indicates that incoming phone calls are being
forwarded and displays the associated phone line
(1, 2, or both).
Group/Private Speaker
Indicates that the Group/Private speaker is off. You
will hear group and private calls through the ear
piece.
Roam
Displays when you enter the service area of another
iDEN service provider. The portable learns and
remembers the new radio frequencies and channels
in use.
GETTING STARTED
5
i1000
TURN IN G O N YO UR PO RTABLE
Press the On/Off button
until a set of icons appears on your
display. (For a description of the icons, see page 5.) Then the
message “Please Wait” displays while the portable connects to your
carrier’s network.
Please Wait
The LED indicator located on top of the portable shows the service
state of your i1000. See Table 1.
Table 1: LED Indicator
LED Indicator
Status of Your i1000
Flashing Red
RegisteringÑyour portable is signing on
to your carrierÕs network.
Solid Red
No serviceÑyour portable cannot sign on.
It will continue trying to connect every two
minutes as long as your portable is turned
on.
Flashing Green
Solid Green
In serviceÑyour portable is ready to use.
You can now place and receive Phone,
Group, and Private calls.
In useÑ-your portable is currently being
used. Check to make sure that you ended
the last call by pressing
.
TURN IN G O FF YO UR PO RTABLE
Press and hold the On/Off button
“Powering Off”.
until you see the message
6
i1000
GETTING STARTED
SPEAKERPH O N E
The i1000 provides a speakerphone feature similar to a speakerphone you
may use on your office or home phone. Because the i1000 is wireless, you will
have the convenience of a hands free speakerphone anytime, anyplace to
bring people together. Use the speakerphone to hold impromptu meetings, or
to listen to your voicemail messages.
With the speakerphone feature, when one party is speaking, the
other party will not be heard. The other party must wait until the
first party stops speaking.
With the built-in speaker, you can use your portable hands free. The
cover can be open or closed during a speakerphone call. However:
• If the cover is open during a speakerphone call and you
close the cover, you will end the call.
• If the cover is closed during a speakerphone call and you
open the cover, the call switches to the earpiece. You can
switch back to speakerphone operation by pressing
under “Spkr”.
During speakerphone use, the “Spkr” option flashes to remind you
that the speakerphone is on.
Typically, the i1000 should be placed 15-30 inches away from you
during a speakerphone call. In a noisy environment, you may want
to move the i1000 closer to you for optimum audio quality to the
other party.
VIBRAC ALL™
VibraCall is an alert that notifies you of incoming phone calls and
messages.
The alert choices are:
• Vibrate Only—produces only a vibration.
• Vibrate/Ring—produces a vibration followed by a ring
tone.
• Vibrate Off—turns off the vibration and produces only a
ring tone.
You can set VibraCall to notify you of all incoming calls and
messages, or you can select individual services for vibration alert.
In “Mail” and “Group/Prvt” modes, the choices are Vibe On or Vibe
Off.
N O T E
If VibraCall is set for incoming calls and messages, the
power-up sequence includes a brief vibrate cycle. You
also hear a call-waiting tone.
GETTING STARTED
7
i1000
Selecting All Incoming Calls and Messages
WXYZ
9
1. Press
2. Press
.
under “All”.
9=Vibrate
Alert:Off
Exit All
MENU
Mode
After you set the vibration alert for all
incoming calls and messages, the
display returns to the previous mode.
Phone Ready
Line1 Vibe
10:54p 12/09
Name M a il
Look for
(the Vibrate All icon) at
the top of your display.
MENU
Mode
Selecting Individual Services
To set the vibration alert for specific
phone or mail services:
9=Vibrate
Alert:Off
WXYZ
9
1. Press
2. Press
.
Exit On
MENU
until you see the
“Selct” menu option on the last
line of the display.
MENU
Mode
3. Press
under “Selct”.
Pressing “Selct” allows you to set
individual vibration alerts for
incoming calls and messages.
9=Vibrate
Alert:Off
Selct
MENU
8
i1000
GETTING STARTED
The first selection is Vibe. To view
the Vibe/Ring vibration alert
MENU
choices, press
keypad.
on the
Phone
Vibrate:
Vibrate Off
Exit Vibe
The vibration selection that you make
affects only the current mode. In this
example, vibration is set only for
Phone mode. You must set each mode
or service individually or select “All”
to set all services.
MENU
Mode
4. To set a vibration alert for another
mode, such as “Mail” or “Group/
Prvt”, press
on the
Group/Prvt
Vibe:Off
keypad until you see the desired
mode or service.
Exit On
5. Press
under “Exit” to return
to the Vibrate Alert menu.
MENU
6. Press under “Exit” again to
Mode
return to your previous base mode.
I F Y O U H A V E A S E C O N D L I N E
And you want to change the vibration selections for
the second line, exit this programming feature, select
the other line, and repeat the procedure for selecting
all services or selecting individual services to vibrate.
GETTING STARTED
9
i1000
TURN IN G O FF G RO UP AN D PRIVATE
MO D ES
Your portable has a special feature, Phone Only mode, that allows
you to turn off the Private and Group services. You can make and
receive phone calls and receive Message Mail.
Placing the portable in Phone Only mode increases the standby battery life.
Make sure that the LED is blinking green, which indicates that you are in a
coverage area.
To turn on the Phone Only mode:
TUV
0
8
1. Press
2. Press
.
80=Phone
Only:Off
under “On”.
Exit On
MENU
Mode
80=Phone
Only:On
3. Press
under “Exit”.
Exit Off
MENU
Mode
Phone ONLY
Line 1
2:12p 07/21
The “Phone ONLY” message
displays. Group and Private
Mode services are now
suspended.
Name Mail
MENU
Mode
10
GETTING STARTED
i1000
To return to normal Phone mode:
TUV
1. Press
2. Press
.
8
0
80=Phone
Only:On
under “Off”.
Exit
O ff
MENU
Mode
3. Press
under “Exit”. The
80=Phone
Only:Off
display returns to Phone Ready.
Group and Private mode services are
now available.
Exit
On
MENU
Mode
GETTING STARTED
11
i1000
SETTIN G TH E TIM E AN D D ATE FO RM AT
If your carrier provides this option, you can set your portable to
display the current time and date. Unless the portable is turned off,
it continues to display the current time during a loss of service.
You have a choice of a 12- or a 24-hour clock format. See Table 2.
N O T E
As you travel between different time zones, your
portable automatically displays local time.
Table 2: Time Display Options
12-Hour Display
12:00a
24-Hour Display
00:00
6:25a
06:25
10:25a
10:25
12:00p
12:00
6:25p
18:25
10:25p
22:25
You have a choice of either a MM/DD (month/day) or a DD/MM
(day/month) date format. See Table 3.
Table 3: Date Display Options
International
US Format
(MM/DD)
Format
(DD/MM)
Date
January 2nd
January 31st
October 9th
December 31st
01/02
01/31
10/09
12/31
02/01
31/01
09/10
31/12
If you activate the time and date, they are displayed in all ready
states (Phone, Group, Private). The time of day is also shown during
an active Phone call. The time and date are not displayed in Group
mode when you select an Area option.
12
GETTING STARTED
i1000
To set the time and date format:
PQRS
7
1
1. Press
.
71=Time/
Date
2. Press
under “Ok”. The
Exit Ok
Time/Date screen displays.
MENU
Mode
The default (preset) time and date format
that is displayed depends on your service
provider. You can accept the default
format or select an alternate format.
Time/Date
Display:On
Exit Off
MENU
Mode
3. Press
until you see the
Time Format:
Time Format screen.
12 Hour
4. Do one of the following:
Exit 24hr
• To accept the 12-hour format,
go to the next step.
• To set the 24-hour format,
MENU
Mode
press
under “24hr”.
(See Table 2 on page 12.)
Then go to the next step.
5. Press
until you see the
Date Format screen.
6. Do one of the following:
• To accept the MM/DD
MM/DD
Exit DD/MM
format, press
“Exit”.
under
MENU
• Or to set the DD/MM format,
Mode
press
under
“DD/MM”. (See Table 3 on
page 12.)
GETTING STARTED
13
i1000
7. Select “Exit”. The Ready screen for each mode (Phone,
Group, and Private) now displays the time and date formats that
you selected.
STO RIN G N UM BERS IN TH E PH O N E AN D
PRIVATE LISTS
You can set a Phone and a Private ID number with the associated
name, which eliminates the need to program the same name twice.
You can add up to 100 numbers to your phone list, store them with
names, and assign them to speed-dial numbers.
The display holds 12 phone-number characters. If the phone
number exceeds 12 characters, you can select “More” to see the
remaining characters. To return to the start of the number, select
“Numbr”.
Entering Phone Numbers Using the Keypad
To enter a number, press the corresponding number key.
Entering a Name Using the Keypad
The number of times that you press a key to enter a letter depends
on the position of the letter on the key. Table 4 describes how to
PQRS
enter each letter on the
key.
7
Table 4: Entering a Name on the Keypad
Letter
Position
P
To enter the Þrst letter on the keypad, press the key
once.
Q
R
S
7
To enter the second letter on the keypad, press the
key twice.
To enter the third letter on the keypad, press the
key three times.
To enter the fourth letter on the keypad, press the
key four times.
To enter the number, press the key Þve times.
14
GETTING STARTED
i1000
Entering Names and Numbers
MNO
ABC
1. Press
The “26=Phone/Prvt List”
message appears on your display.
2
6
.
26=Phone/
Prvt List
2. Press under “Ok”.
Ok
Exit
.
MENU
Mode
The next screen displays the
remaining number of phone numbers
and private IDs that you can store.
Available
98 Phone #
3 Prvt IDs
MENU
Mode
3. Enter the name and press
under “Store”.
Enter Name
_
_
See Table 5 on page 16 for an
example of entering a name.
Exit
Store
MENU
Mode
GETTING STARTED
15
i1000
Table 5: Entering a Name
N A M E M E T H O D E X A M P L E
To enter the name “Tim”:
TUV
1. Enter “T” by pressing
8
once.
2. Move to the next letter by pressing
.
.
GHI
3. Enter “i” by pressing
4
.
4. Move to the next letter by pressing
MNO
6
5. Enter “m” by pressing
.
6. Enter the phone number that you
want to associate with this name
and press
under “Store”.
Enter Phone
Number
_
_
To skip the Phone Number entry, press
Skip Store
under “Skip”. You will go
directly to the “Enter Prvt ID Number”
screen.
MENU
Mode
The next screen displays the name
that you entered and a flashing
speed-dial number.
TIM
Spd#=3
7. Do one of the following:
• To accept the speed-dial
Cancl Store
number shown, press
under “Store”.
MENU
Mode
• To change the speed-dial
number, enter the desired
number. The number stops
flashing. To enter another number, press
the desired number.
and enter
If you do not want to enter a speed-dial number, press
under
“Cancl”. You will return to the “Enter Phone Number” screen.
16
GETTING STARTED
i1000
Private ID number associated
with the name that you entered.
Enter Prvt
ID Number
To skip the Private ID number entry,
_
press
under “Skip”.
Skip Store
For more information about using the
speed-dial feature, see “Speed Dial
Method” on page 24.
MENU
Mode
Editing and Erasing Phone List Contents
Editing Phone List Entries
ABC
2
0
0
1. Press
2. Press
,
,
,
,
.
.
under “Edit”
Erasing Phone List Entries
ABC
2
1. Press
,
,
2. Press
3. Press
once.
under “Erase”
Editing and Erasing Private ID List Contents
Editing Private ID List Entries
ABC
2
1
1. Press
2. Press
,
,
,
.
under “Edit”
Erasing Private ID List Entries
ABC
2
1
1. Press
,
,
,
.
1. Press
2. Press
once.
under “Erase”
GETTING STARTED
17
i1000
CH AN G IN G TH E D ISPLAY LAN G UAG E
You can customize your portable to display one of four languages:
English, French, Spanish, or Portuguese.
To change the displayed language:
1. Press
screen.
PQRS
to view the language option
7
0
2. Press
under “Ok”.
to scroll through
3. Press
70=Language
English
the language options.
Exit Ok
Pressing
under “Exit” at any
time retains the current language
selection.
MENU
Mode
4. When the desired language
appears on your display, press
1
under “Ok”. The text
immediately changes to the
language that you selected.
70=Langue
Francais
Quitt Ok
5. Press
under “Exit”,
“Quitt”, “Salir”, or “Saír”
(whichever one displays) to exit
this mode.
MENU
Mode
The language that you select will be the displayed language.
N O T E
If you select an incorrect language, repeat the
procedure for Changing the Display Language.
18
GETTING STARTED
i1000
MO D ES AN D M EN US
Modes and menus are the navigational tools of your portable.
Modes
Modes are portable operation states for placing and receiving calls.
Your portable has three modes:
• Phone—for cellular phone calls and special phone features
• Private—for one-to-one radio calls
• Group—for calls with all individuals in a designated
talkgroup.
To access modes:
Cover Closed
Cover Open
¥ To switch between Phone,
Group, and Private modes,
¥ To switch between Phone,
Group, and Private modes,
press
under ÒModeÓ.
Mode
press
.
For more information, see “Phone Mode” on page 23, “Private
Mode” on page 35, and “Group Mode” on page 41.
Menus
Menus are choices within each mode that enable you to use various
features.
To access menus:
MENU
Press
to scroll through the menus associated with each mode.
With the cover open, when your portable is ready to use, your
display looks like the following screens for the Phone, Group, and
Private modes. If the word “Ready” does not appear after the mode
name in the display, your portable is not ready.
GETTING STARTED
19
i1000
Phone Mode and Menus - Cover Open
Menu options:
1
Phone Ready
Line 1
Name
Forwd
Memo
Wait
Mail
Spd#
Prgm
10:54a 12/09
Name Mail
Line 2
MENU
Mode
Private Mode and Menus - Cover Open
Menu options:
1
Prvt Ready
John
Alert
Name
Mail
Prgm
11:05a 12/09
Alert Mail
MENU
Mode
Group Mode and Menus - Cover Open
Menu options:
Group Ready
Talkgrp 10
Alert
Area
Mail
Prgm
3:27p 12/09
Alert Mail
MENU
Mode
To use menu options:
Mode
1. Press
2. Press
to select the mode (Phone, Group, or Private).
to scroll through the available menu options for
MENU
the selected mode.
3. Press under the displayed menu option that you wish
to select.
20
GETTING STARTED
i1000
N O T E
If you set the Silent Group programming menu to
silence incoming alerts and voices, the “Group
Ready” screen displays as “Group-Silent”. To reset it:
TUV
DEF
3
8
1. Press
2. Press
.
under “Ok”.
GETTING STARTED
21
i1000
NOTES:
22
GETTING STARTED
i1000
PHONE MODE
In Phone mode, you can make and receive phone calls, forward calls,
use call waiting, put calls on hold, and use three-way calling.
AT FIRST G LAN CE
The first menu option choices that appear on the Phone Ready
screen depend on whether the cover is open or closed.
Cover Closed
Phone Ready
Use theVolume Control
buttons to scroll
through your stored
List.
Line 1
12:12p 05/08
List Mode
Group Ready
Phone
0=5551212
Talkgrp 10
12:12p 05/08
Cancl More
List Mode
Cover Open
Phone Ready
Line 1
12:12p 05/08
Name Mail
Select Mail
Type
Name:
_
Voice Mesg
Cancl More
GETTING STARTED
23
i1000
M AKIN G A PH O N E C ALL
To make a phone call:
1. Be sure that the cover is open. You cannot make a phone call when
the cover is closed.
2. If you are not in Phone mode,
Mode
press
until “Phone
Ready” appears on your display.
Phone Ready
Line 1
3. Dial your call using one of the
four options listed below: direct
dial, scroll, speed dial, or name.
3:15p 08/21
Name Mail
Direct Dial Method
MENU
Mode
4. Dial the number using the
keypad. If you make a
mistake, press
once for
each character that you want to erase.
You can return to the “Phone Ready” mode at any time by pressing
the option
key under the word “Cancl”.
5. Press
to place the call.
6. To hang up, press
or close the cover.
Scroll Method
4. Press
to scroll backward or
forward through the stored list of numbers and names.
5. Press to place the call.
6. To hang up, press
or close the cover.
Speed Dial Method
MENU
line of your display.
4. Press
until you see the “Spd#” option on the last
5. Press
under “Spd#”.
6. Enter the assigned speed dial number (1-100). You will
see the name associated with the number. For more
information, see “Storing Numbers in the Phone and Private
Lists” on page 14.
7. Press
to place the call.
24
GETTING STARTED
i1000
8. To hang up, press
or close the cover.
Name Method
MENU
4. Press
your display.
until you see the “Name” menu option on
under “Name”.
5. Press
6. Press the key with the first letter of the name
associated with the Phone number. The name and phone
number appear on your display.
7. Press
to place the call.
or close the cover.
8. To hang up, press
Emergency Dial
The Emergency Dial feature allows you to call the emergency
phone number by continuously pressing a single key. (Your carrier
assigns this number.) This feature is available even when the
keypad is locked, although it is not available during an active call.
1. From any mode (Phone, Private, or Group), press
WXYZ
and hold
until the unit displays “EMERGENCY”. The
9
portable then automatically dials the emergency number.
2. To terminate the call, press
. The emergency phone
number will not be saved as the last number dialed.
N O T E
Contact your service provider for details on the
Emergency Dial feature.
Automatic Redial
If you receive a “System Busy, Try Later” message, press
to have your portable automatically redial the number. You will hear
a ring tone when the call is successful.
Last Number Redial
To redial the last number, simply press
.
GETTING STARTED
25
i1000
RECEIVIN G A PH O N E C ALL
When you receive a call:.
• The portable rings and/or vibrates.
Incoming
Phone Call
• If you subscribe to caller ID, the
caller’s ID displays.
Spkr
End
• If the caller is stored in your Phone
List and the name matches the
caller ID, the name displays.
MENU
You can answer a phone call with the
cover open or closed. See Table 6.
Mode
Table 6: Phone Call Options
To reject a call:
Cover Closed
Cover Open
¥ Press
under ÒEndÓ.
¥ Press
under ÒEndÓ
or close the cover.
¥ If Auto Answer is set, the call
automatically goes to the
speakerphone.
¥ If Auto Answer is set, the
call always goes to the
earpiece.
To answer a call:
Cover Closed
Cover Open
Speakerphone:
Earpiece:
Press
under ÒSpkrÓ.
Press
. This action turns
on the earpiece.
During the call, the Spkr menu
option ßashes to remind you that
the speakerphone is on.
Speakerphone:
Press
under ÒSpkrÓ. This
Earpiece:
action transfers the sound to the
speakerphone.
Open the cover to turn off the
Speakerphone. This action
transfers the sound to the
earpiece.
During the call, the Spkr menu
option ßashes to remind you that
the speakerphone is on.
26
GETTING STARTED
i1000
To end a call:
Cover Closed
Cover Open
¥ Close the cover. This action
ends the connection.
¥ Press
This action terminates the
connection.
under ÒEndÓ.
¥ Or, press
.
PRO G RAM M IN G YO UR O WN PH O N E
N UM BER
portable. You can enter it now, or wait for your first incoming phone
call, when your carrier’s network automatically enters it for you.
N O T E
If your portable has two phone lines, first set the line
for the phone number that you want to program, and
then continue here. For more information, see
“Setting the Active Line” on page 33.
1. To enter the phone number of your portable (or the active line,
1
if you have two lines), press
2. Press
3. Enter your phone number.
4. Press under “Store”.
.
under “Ok”. The “Enter Number” screen appears.
SELECTABLE RIN G STYLES
Your portable has nine selectable ring styles. Portables with two
phone lines can use the same or different ring styles for each phone
line.
GETTING STARTED
27
i1000
To set a ring style:
1. Press
DEF
1
3
to access the Programming Menu
item for ring style selection.
31=Set Ring
Style:1
The display shows your current
ring style.
Exit Ok
2. Press
under “Ok”.
MENU
Mode
3. Press
to scroll through
the available Ring Styles.
4. To listen to the selected ring
style, press the Volume buttons
on the side of the portable.
Ring
Style 4
Cancl Ok
5. Press
under “Ok” to select
the current Ring Style shown. To
leave the ring style unchanged,
MENU
press
under “Cancl”.
Mode
N O T E
If you have a second line and want to change the ring
style for the second line, exit this programming
feature, select the other line, and repeat the above
procedure for Selectable Ring Styles.
C ALL FO RWARD IN G
You can forward all your incoming calls (unconditional) to any
number that you wish or select those circumstances (conditional)
Make sure that the LED is blinking green, which indicates that you are in a
coverage area.
Selecting a Call Forward Number
You can select the call forward number using the direct dial, scroll,
speed dial or name search method. For more information, see “Making
a Phone Call” on page 24.
28
GETTING STARTED
i1000
Unconditional Call Forwarding
Unconditional call forwarding forwards all incoming calls to the
designated number. Your portable will not ring when you activate
unconditional call forwarding.
MENU
1. Within Phone mode, press
until you see “Forwd” on the last
line of the display.
Phone Ready
Line 1
9:06a 09/03
2. Press
under “Forwd”.
Forwd Spd#
3. To select the number where you
want your calls forwarded, do one
of the following:
MENU
• Enter a number.
Mode
• Or, press the scroll keys to
select a number from your
stored list. For more
Forward:Off
To:_
information, see “Storing
Numbers in the Phone and
Private Lists” on page 14.
Exit On
4. Press
under “On”.
5. After the “Please Wait” message
MENU
displays, press
“Exit”.
under
Mode
Notice that the Call Forward icon
appears on your display when Unconditional Call Forwarding is
set.
Conditional Call Forwarding
You may want to forward your calls only if your unit is busy (Busy), is
not answered (NoAns), or you cannot be reached (NoRch).
N O T E
You must turn off Unconditional Call Forwarding
before you can use Conditional Call Forwarding
options.
GETTING STARTED
29
i1000
1. Within Phone mode, press
MENU
until you see “Forwd” on
the last line of your display.
Phone Ready
Line 1
2. Press
under “Forwd”.
9:06a 09/03
Forwd Spd#
MENU
Mode
MENU
3. Press
once again until you
see “Busy” and “NoAns” on the
last line of your display.
Forward:Off
To:
• To forward your calls when
your phone is busy, press
Busy NoAns
under “Busy”.
• To forward your calls when
you do not answer a call, press
MENU
Mode
under “NoAns”.
MENU
4. Press
again until you see
“NoRch” and “Rcl#” on the last
line of your display.
Forward:Off
To:
• To forward your calls when
you cannot be reached, press
NoRch Rcl#
under “NoRch”.
5. After you select the call-forward
option, either enter the number
where you want your calls to be
forwarded, or press the scroll
buttons and select a number.
MENU
Mode
6. Press
7. Press
under “On”.
under “Exit”.
N O T E
You can set call forwarding on Busy, No Reach, and
No Answer independently.
30
GETTING STARTED
i1000
C ALL WAITIN G
Using the Call Waiting feature, you can answer an incoming call
when you are on another call. Call Waiting is on unless you turn it off
for a particular call.
1. You will hear a tone to alert you of
an incoming call. Your display
shows the incoming number and
asks “Accept Call?”. To accept
Accept Call
On Line 1?
the call, press
under
“Yes” on the last line of your
display.
No Yes
MENU
Mode
2. Press
under “Hold” to
place the second call on hold and
return to the first call. Pressing
Call 1-Hold
under “Hold” takes you
555-1212
back and forth between the two calls.
Hold
3. To end the active call, press
or close the cover.
MENU
C ALL H O LD
Mode
“Hold” appears as an option on your
display only while you are on an active call.
1. To place the active call on hold, press
may then answer or place another call.
under “Hold”. You
under ”Hold” again.
2. To remove the call from hold, press
GETTING STARTED
31
i1000
3-WAY C ALLIN G
If your portable has 3-way calling,
you can combine two ongoing phone
calls into one conversation. This
option is available only when you
initiate the second call.
Phone-In Use
5551212
1:40p 05/08
You cannot place either call on hold
during a 3-way call.
3way Spkr
1. Place a phone call or receive a
phone call.
MENU
Mode
2. Press
under ”3way”. This
action places the current call on
hold.
3. Enter the phone number for the second call and press
.
4. When the second call is connected, press
to join the calls.
under “3way”
ALTERN ATE PH O N E LIN E
If your portable is activated with two phone lines, you can switch
between them.
To change phone lines, your portable must at the Phone Ready
screen.
The following settings are independent for each phone line. When
you enable a setting, it applies only to the active line.
• Ringer Volume
• Auto Answer
• One-minute Beep
• Automatic Display Timer
• Resettable Timer
• Total Call Timer
• Selectable Ring Styles
• Call Forwarding
32
GETTING STARTED
i1000
Setting the Active Line
1. Be sure that your portable displays
“Phone Ready”.
Phone Ready
2. Press
“Line 2”.
until you see
Line 1
1:48p 08/21
Wait Line2
3. Do one of the following:
• Press under “Line2” to
activate Line 2 when Line 1 is
the active line.
MENU
Mode
• Or, press
under “Line1”
to activate Line 1 when
Line 2 is the active line.
Receiving a Call
You can receive calls on either line, regardless of the active line
setting.
• If the line is the same as the currently active line, that icon
simply flashes.
• If the call is on the line that is not currently active, the active
line icon remains lit and the alternate line icon flashes.
Receiving Calls on Your Second Line
If you are on a call on one line:
1. Press
under “Yes” to
1
answer the call on the other line.
Your previous call will be placed
on hold.
2
3055551212
Take Call
On Line 2?
No Yes
2. Do one of the following:
• To end the call, press
.
• Or, to place the current call on
MENU
hold, press
“Hold”.
under
Mode
When the call is terminated, the
portable remains active in the last active
line selected.
GETTING STARTED
33
i1000
NOTES:
34
GETTING STARTED
i1000
PRIVATE MODE
A Private call is a one-to-one conversation between two
individuals. Each portable is identified by a name or a number that
contains up to five digits.
AT FIRST G LAN CE
The first menu option choices that appear on the “Prvt Ready”
screen depend on whether the cover is open or closed.
Cover Closed
Prvt Ready
Use theVolume Control
buttons to scroll
through your stored
List.
TIM
12:12p 05/08
List Mode
Phone Ready
Prvt Ready
TIM
Line 1
12:12p 05/08
12345
Cancl
List Mode
Cover Open
Prvt Ready
TIM
12:12p 05/08
Alert Mail
Select Mail
Type
Name:Prvt
_
Voice Mesg
Exit Queue
GETTING STARTED
35
i1000
G RO UP/ PRIVATE SPEAKER
You can hear calls through either the earpiece or the speaker in
Private mode. Pressing the Speaker button
on top of the
portable turns the Group/Private Speaker on or off.
If you set the Speaker button on, you will hear incoming calls
through the speaker. If you set the Speaker button off, you will hear
a short alert tone when you receive a private call. You will hear
incoming calls through the earpiece.
M AKIN G A PRIVATE C ALL
I F T H E C O V E R I S C L O S E D . . .
•
To contact the last Private ID that you called,
first select the “Prvt Ready” mode, then press
the PTT button.
•
To select another number (previously entered
in your Private ID list), press
under
“List”. This allows you to use the Volume
Control buttons to scroll to the desired name,
then press the PTT button.
With the cover open, you can use one of three methods: Direct
Entry, Scroll, or Name.
Direct Entry Method
Mode
1. Press
until you see
“Prvt Ready” on your display.
Prvt Ready
JOHN SMITH
8:23p 10/23
2. Use the keypad to enter the
Private ID of the person that you
want to reach.
Alert Mail
3. To speak, press and hold the
PTT button, wait for the chirp,
then speak into the microphone.
MENU
Mode
4. To listen, release the PTT
button.
Scroll Method
Mode
1. Press
until you see “Prvt Ready” on your display.
to select the person for the private call that
2. Press
you previously entered into your Private ID list.
36
GETTING STARTED
i1000
3. Press and hold the PTT button, wait for the chirp, then
speak into the microphone.
Name Method
Mode
1. Press
2. Press
until you see “Prvt Ready” on your display.
until you see the “Name” menu option on
MENU
your display.
3. Press
under “Name”.
4. Press the key with the first letter of the name
associated with the Private ID.
5. Press
to find the desired name in the list.
6. Press and hold the PTT button, wait for the chirp, then
speak into the microphone.
RECEIVIN G A PRIVATE C ALL
When you receive an incoming Private call, you hear a brief tone.
Your unit automatically switches to Private mode, and the Private ID
or the name of the caller displays.
Wait for the caller to finish speaking, then press and hold the PTT
button. Begin speaking after you hear the chirp.
PRO G RAM M IN G YO UR PRIVATE ID
To store your Private ID in your portable:
ABC
1. Press
.
2
2. Press
under “Ok”.
3. Enter the Private ID provided by your carrier.
4. Press under “Store”.
REC ALLIN G YO UR PRIVATE ID
ABC
1. To recall your portable’s private ID, press
.
2
This is the number supplied by your carrier, that you must store in your
portable. See “Programming Your Private ID” above.
2. Press
under “Exit”.
GETTING STARTED
37
i1000
C ALL ALERT™
You can access Call Alert from Group and Private modes. Using Call
Alert, you can privately page an individual by sending an audible
tone.
Sending a Call Alert
1. Be sure that the cover is open.
2. Press Mode to go to the “Prvt Ready” screen.
3. Press
under “Alert”.
4. Enter the private ID or press
to scroll to the
name of the person to whom you want to send the Call Alert.
You may also select the person by pressing
and using
MENU
Name Search.
5. Press the PTT button to send the Call Alert.
Receiving a Call Alert
When you receive a Call Alert, you hear a tone and see a message on
your display.
• To return the Call Alert, press the PTT button.
• Or, to clear the Call Alert, press
under “Clear”, or
press any key other than the PTT button to silence the alert
tones.
N O T E
Until the Call Alert is cleared or returned, you will
not receive any additional Phone, Group, or Private
calls.
C ALL ALERT STACKIN G
Call Alert Stacking is an optional feature that allows you to save up
to eight Call Alerts in a queue.
38
GETTING STARTED
i1000
Receiving a Call Alert with Stacking
With Call Alert Stacking, you can
either clear a Call Alert or save it to
the queue for later recall.
Alert
JOHN SMITH
3 Queued
• To clear a Call Alert, press
under “Clear”.
Clear Queue
• To place the Call Alert into the
queue, press
under
MENU
Mode
“Queue”. Pressing
queues the Call Alert.
also
Mode
If you receive multiple Call Alerts,
the last received Call Alert displays and the remaining Call Alerts
are stacked at the beginning of the queue.
Responding to a Call Alert in the Stack
You can respond to the Call Alerts in any order. To select a Call Alert
for response:
1. Press
under “Queue”.
2. Press
to scroll to the desired Call Alert.
3. Press the PTT button to respond to the Call Alert. After you
respond to the Alert, it is removed from the stack.
GETTING STARTED
39
i1000
NOTES:
40
GETTING STARTED
i1000
GROUP MODE
A Group call is an instant communication that allows you to talk to
all individuals in a talkgroup at the same time. A talkgroup is a pre-
defined set of individuals who share a common communication
need. Talkgroups appear on your display as names or numbers.
AT FIRST G LAN CE
The first menu option choices that appear on the Group Ready
screen depend on whether the cover is open or closed.
Cover Closed
Group Ready
Use theVolume Control
buttons to scroll
through your stored
List.
Talkgrp 10
12:12p 05/08
List Mode
Prvt Ready
Group Ready
Talkgrp 10
TIM
12:12p 05/08
Cancl
List Mode
Cover Open
Group Ready
Talkgrp 10
12:12p 05/08
Alert Mail
Select Mail
Type
Alert
TIM
1 Queued
Voice Mesg
Exit Queue
GETTING STARTED
41
i1000
G RO UP/ PRIVATE SPEAKER
You can hear calls through either the earpiece or the speaker in
Group mode. Pressing
(the Group/Private Speaker button)
turns the Group/Private Speaker on or off.
If you set the Group/Private Speaker button on, you will hear
incoming calls through the speaker. This is helpful in monitoring
talkgroup activity.
If you set the Group/Private Speaker button off, a brief alert tone
notifies you of activity within the talkgroup. You will hear incoming
calls through the earpiece.
M AKIN G A G RO UP C ALL
I F T H E C O V E R I S C L O S E D . . .
•
•
To contact the last group that you called, first
select the “Group Ready” mode, then press the
PTT button.
Or, to select another number (previously entered
in your talkgroup list), press
under “List”.
This allows you to use the Volume Control buttons
to scroll to the desired group name. At the desired
group name, press the PTT button.
Mode
1. Press
until “Group
Ready” displays. Your most
recently used talkgroup displays,
for example, “Talkgrp 10”.
Group Ready
Talkgrp 10
11:15a 04/02
2. To place a call to this talkgroup,
press and hold the Push-to-Talk
(PTT) button. Wait for the chirp
sound and then speak into the
microphone.
Alert Mail
MENU
Mode
3. To listen, release the PTT
button.
CH AN G IN G TALKG RO UPS
You may change talkgroups to reach talkgroups other than the one
that is active. Your portable can store up to 30 pre-defined
talkgroups.
1. From Group mode, enter the talkgroup number, or press
to select the talkgroup from your stored talkgroup list.
42
GETTING STARTED
i1000
2. Press
under “Ok”.
3. To talk, press the PTT button and wait for the chirp.
RECEIVIN G A G RO UP C ALL
No action is necessary to receive a Group call as long as your
portable is not busy in an active Phone or Private call. You can
receive group calls only on the talkgroups that you have predefined.
For more information, see “Talkgroup Naming”.
Any communication activity within the talkgroup that you select
automatically switches your portable into Group mode.
AREA SELECTIO N
When in Group mode, you can call only those talkgroup members in
a specific location. This is useful when you know where the
individuals are located within the service area.
Mode
1. Press
2. Press
3. Press
until you see “Group Ready” on your display.
MENU
once, then press
under “Area”.
to scroll through the targeted areas specified by
your local service provider.
4. Press under “Ok” to select the targeted area.
TALKG RO UP N AM IN G
To add a talkgroup name to your portable:
ABC
ABC
1. Press
2. Press
.
2
2
under “Ok”.
3. At “Add New Entry?”, press
under “Ok”.
4. At “Enter ID”, enter the desired talkgroup number.
6. Press
under “Store”.
C ALL ALERTS
You can access Call Alert from Group and Private modes. Using Call
Alert, you can page your talkgroup by sending an audible tone.
For more information, see “Sending a Call Alert” on page 38.
GETTING STARTED
43
i1000
NOTES:
44
GETTING STARTED
i1000
VOICE MAIL
Your portable provides full support for Voice Mail. You can go to
Voice Mail from any mode by pressing
under “Mail”.
When you receive new voice mail messages in your voice mailbox,
the
icon appears on your display and you hear the Voice
Mail alert tone (if Mail Notification Display is turned on).
• To turn on mail notification, press
DEF
3
then press
under “On”.
• To turn off mail notification, press
3 =Mail
Display:On
DEF
3
then press
Exit Off
under “Off”.
MENU
RETRIEVIN G VO ICE
M AIL
Mode
In addition to the Voice Mail alert
tone, you also see the message, “New Voice Mail Waiting”.
When you see an exclamation point (!) on the display, you have at
least one urgent message.
To retrieve your voice mail immediately:
1. Press
under “Dial”. This action automatically places a
call to your voice mailbox.
2. To close your voice mailbox, press
under “Exit”.
VIEWIN G VO ICE M AIL STATUS
You may view the status of voice
messages at anytime. With the cover
open:
Voice Mail
1 New
1 Total
1. Press
any mode.
under “Mail” from
Exit Dial
2. Press
under “Voice”. Your
voice mailbox screen opens and
displays the number of New and
Total messages currently in your
voice mailbox.
MENU
Mode
3. Press
under “Dial” to
retrieve your voice mail messages. The most recent message is
retrieved first.
GETTING STARTED
45
i1000
NOTES:
46
GETTING STARTED
i1000
MESSAGE MAIL™
Your portable provides full support for Message Mail. You can access
this function from any mode by pressing
under “Mail”.
Message Mail can be either a numeric page or a text message of up
to 140 characters. Your portable can receive and store 16 mail
messages at any time.
RECEIVIN G N EW M ESSAG E M AIL
To read your new mail now:
I F T H E C O V E R I S C L O S E D . . .
And you select “Now”, use the Volume Up and Down
buttons (instead of the scroll keys) to scroll through
and read your messages.
When you receive a new message, the
flashes. You may also receive an audible alert.
icon appears and
• Press
under “Now” to
1
read your new mail
immediately.
New Mail
Read?
• Use the scroll keys to scroll
through and read your
messages.
Later Now
• Press
under “Later” to
MENU
postpone reading your mail and
to clear the display. The icon
stops flashing but remains on
your display to remind you that
you have unread messages.
Mode
RETRIEVIN G STO RED / UN READ M AIL
To read your new mail later:
You may access postponed or saved Message Mail from any mode.
The cover must be open.
GETTING STARTED
47
i1000
1. Press
2. Press
under “Mail”.
under “Mesg”. Your
Message Mail
Message mailbox opens and
briefly displays the number of
New and Saved messages
currently in your Message
mailbox. Then, the most recent
message opens.
2 New
0 Saved
MENU
Mode
3. Use
to scroll through
the first screen of any unread or
saved mail messages.
1>Call
5551212
12:31p 5/1
4. Press
under “Read” to
Exit Read
read the entire message.
Your message shows the time and date that
the sender entered it in the network.
MENU
Mode
SAVIN G AN D ERASIN G M AIL
After you read a text or numeric
message, you can either Save or Erase
the message. Press
desired option.
under the
1>Call
5551212
12:31p 5/1
Erase Save
MENU
Mode
AUTO C ALL BACK
With the cover open, you can respond
to numeric pages and text messages containing a call-back number.
To automatically dial a number contained within a Message Mail,
press
.
M ESSAG E M AIL M EMO RY FULL
If all 16 message registers are full, your portable displays the
message “Mail Waiting, Memory Full”. You cannot receive new
Message Mail until you empty register space by erasing saved or
unread messages.
48
GETTING STARTED
i1000
PROGRAMMING MENU OPTIONS
You can customize the settings on your portable using the
Programming Menu.
You may access the Programming Menu from any mode (Phone,
Group, or Private).
MENU
1. Press
2. Press
3. Press
4. Press
until you see “Prgm” on the display.
under “Prgm”.
under “Ok”.
to scroll to the desired Programming Menu
Option or enter the number of the Option.
S H O R T C U T
To enter the programming menu, press
then press the keypad number. See Table 7.
Table 7: Programming Menu Options
Keypad
Number
Menu Option
Function
1
Own Ph #
Stores the telephone number
of your portable after you
receive the Þrst incoming call.
Or, you can enter the number.
2
3
Pgm Pvt ID
Mail Display
Displays the private number of
your portable. You must initially
enter this number yourself.
Turns on and off the New Mail
message that is displayed with
incoming Voice or Message
Mail.
GETTING STARTED
49
i1000
Table 7: Programming Menu Options
Keypad
Number
Menu Option
Function
4
Manual Lock
Locks your portable to prevent
unauthorized use. You must
enter a pass code to unlock it.
With the manual lock on, you
can reach emergency help by
pressing and holding the
emergency key designated by
your carrier.
5
Auto Lock
Automatically locks your
portable each time it is
powered off to prevent
unauthorized use.
6
9
Auto Answer
Vibrate Alert
Turns on or off automatic
answering of incoming phone
calls after 1-4 rings.
Provides non-audible
notiÞcation of incoming calls
and messages.
The following options require you to press two keypad numbers. For
example, to enter keypad number 10, press 1 then press 0.
10
Last Call Timer
Displays the duration of the
most recent phone call.
11
Display Timer
Turns on or off automatic
display of the Last Call Timer at
the end of each phone call.
12
13
14
Reset Timer
Total Timer
Displays cumulative airtime of
all phone calls since last reset.
Displays cumulative airtime of
all phone calls.
1 Minute Beep
Automatically signals each
minute of elapsed phone
airtime with an audible beep.
GETTING STARTED
50
i1000
Table 7: Programming Menu Options
Keypad
Number
Menu Option
Function
20
Phone List Edit
Edits and erases up to 100
frequently called phone
numbers and associated
names.
21
22
Prvt ID List Edit
Edits and erases up to 100
Private numbers and
associated names.
Talkgrp List
Program
Adds/Edits/Erases numbers
and associated names for up to
10 pre-programmed
talkgroups.
23
Area List Program
Adds/Edits/Erases numbers
and associated names for up to
50 targeted areas.
26
30
Phone/Prvt List
Ringer Volume
Adds phone and private
numbers in one procedure.
Allows you to set the ringer
volume using the volume
control keys, or lower the
volume to silence the ringer.
31
32
Set Ring Style
Mail Volume
Allows you to select a distinct
ring style for incoming phone
calls.
Allows you to set the volume of
incoming Message Mail and
Voice Mail tones using the
volume control keys, or lower
the volume to silence the mail
alert tones.
33
34
Earpiece Volume
Keypad Volume
Allows you to set the default
earpiece volume using the
volume control keys.
Allows you to set the volume of
the keypad tones using the
volume control keys, or to
silence the keypad tones.
GETTING STARTED
51
i1000
Table 7: Programming Menu Options
Keypad
Number
Menu Option
Function
35
Speaker Volume
Temporarily adjusts the Group/
Private Speaker volume for
noisy environments.
36
38
40
Spkr Vol Set Tone
Silent Group
Turns the speaker volume set
tones on or off.
Silences all incoming Group
Call alerts and voice activity.
Change Passcode
Changes your secret four-digit
passcode from the initial
setting 0000.
70
Language
Provides your choice of one of
four languages for your display
text.
71
80
Time/Date
Selects the format of the time
and date display.
Phone Only
Allows you to turn on or off
incoming Private and Group
services.
N O T E
Contact your service provider before performing the
shaded programming menu features below.
Option
Number
Menu Option
Feature Reset
Master Clear
Master Reset
Function
41
42
43
Returns all feature settings to
their original defaults.
Performs Feature Reset and
erases all stored lists.
Resets the portableÕs
identiÞcation number.
GETTING STARTED
52
i1000
44
50
Change Service
Key
Changes or resets the fraud
prevention service key.
NAM
Selects alternate Numeric
Assignment Module (NAM).
See local service provider for
information.
51
Net ID
Edits the pre-programmed
Network number list and select
roaming options.
GETTING STARTED
53
i1000
NOTES:
54
GETTING STARTED
i1000
ERROR MESSAGES
You may receive error messages under certain conditions. Before
contacting your service provider, note the message, numeric code,
and the conditions under which it appeared. The following table
lists and describes the error messages.
Table 8: Error Messages
Error Messages
Message Description
Number Not in Service
The number that you entered is
not valid.
User Not Available
The unit that you called is either
busy, out-of-range, or turned off.
Please try again later.
User Not Authorized
Please Try Later
The party that you called has not
purchased this service.
This service is temporarily not
available. Please try again later.
User Busy in Private
Service Restricted
The unit that you called is busy in
a Private call.
This service was restricted by
your service provider or it was
not purchased.
Service Not Available
System Busy Try Later
This feature is not available on
the current network.
The system is experiencing
heavy trafÞc. Please try again
later.
Service Conßict
Please Try Again
This service cannot be enabled
because an incompatible
service has already been turned
on.
An error occurred. Note the error
code and try again.
GETTING STARTED
55
i1000
Table 8: Error Messages
Error Messages
Message Description
Self Check Error
A fault was detected with your
portable. If this error recurs, note
the error code and contact your
service provider.
Self Check Fail
An operational fault was
detected with your portable. Note
the numeric code, turn your
portable off, and contact your
service provider immediately.
56
GETTING STARTED
i1000
ACCESSORIES
IMPORTANT
SAVE THESE ACCESSORY
SAFETY INSTRUCTIONS
• Before using the battery, read all the instructions and
cautionary markings on (1) battery, (2) battery charger, and
(3) portable using battery.
• For your protection, store the battering it’s case when not in
use.
• Before using the Travel Charger, read all the instructions and
cautionary markings on (1) the Travel Charger, (2) the
battery, and (3) the portable using the battery.
• Before using the Vehicular Battery Charger (VBC), read all
the instructions and cautionary markings on (1) the VBC, (2)
the battery, and (3) the portable using the battery.
• Before using the Desktop Battery Charger, read all the
instructions and cautionary markings on (1) battery charger,
(2) battery, and (3) portable using battery.
• Do not expose the Travel Charger, Desktop Battery Charger
or Vehicular Battery Charger to rain or snow.
To reduce risk of injury, charge only the
rechargeable batteries listed. Other types of
batteries may burst, causing personal injury and
damage.
!
W A R N I N G
• To reduce risk of damage to the cord or plug, pull by the plug
rather than the cord when disconnecting the Travel Charger
or Desktop Battery Charger from the AC receptacle or when
disconnecting the Vehicular Battery Charger from the
cigarette lighter.
• Do not operate the Travel Charger or Vehicular Battery
Charger with a damaged cord or plug.
• Do not attempt to disassemble the Travel Charger or
Vehicular Battery Charger.
• The Travel Charger or Vehicular Battery Charger may
become warm during operation, but not hot. If the Travel
Charger becomes hot to the touch, unplug it from the AC
outlet immediately and discontinue its use. If the Vehicular
Battery Charger becomes hot to the touch, unplug it from
GETTING STARTED
57
i1000
the cigarette lighter immediately and discontinue its use.
• Use of a non-recommended attachment to the Desktop
Battery Charger may result in a risk of fire, electric shock, or
injury to persons.
• Make sure the Desktop Battery Charger cord is located so
that it will not be stepped on, tripped over, or subjected to
damage or stress.
• An extension cord should not be used with the Desktop
Battery Charger unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and
electric shock. If an extension cord must be used, make sure:
(1) that the pins on the plug of the extension cord are the
same number, size, and shape as those on the plug of
the charger;
(2) that the extension cord is properly wired and in good
electrical condition; and,
(3) that the cord size is 18AWG for lengths up to 100 feet
and 16AWG for lengths up to 150 feet.
• Do not operate the Desktop Battery Charger with damaged
cord or plug - replace them immediately.
• Do not operate the Desktop Battery Charger if it has
received a sharp blow, has been dropped, or has been
damaged in any way; take it to a qualified service technician.
• Do not disassemble the Desktop Battery Charger; take it to a
qualified service technician when service or repair is
required. Incorrect reassembly may result in a risk of electric
shock or fire.
• Maximum ambient temperature around the power supply of
the Desktop Battery Charger must not exceed 40°C (104°F).
• The output power from the power supply must not exceed
the rating given on the Desktop Battery Charger.
• The disconnection from the line voltage is made by
unplugging the power supply’s transformer from the AC
receptacle.
• To reduce risk of electric shock, unplug the Desktop Battery
Charger from the outlet before attempting any maintenance
or cleaning.
• The portable must be turned off while charging in the
Desktop Battery Charger.
• The Desktop Battery Charger is for indoor use only.
58
GETTING STARTED
i1000
BATTERIES
MOTOROLA BATTERIES
Description/Chemistry
Ultra-slim Lite
Kit Number
NTN8618A
NTN8615A
NTN8614A
NTN8617A
Charging Time*
2.5 Hours
2.5 Hours
3 Hours
Slim Lithium Ion
Standard Lithium Ion
Extended Lithium Ion
4 Hours
* Charging times based on a fully-charged battery
N O T E :
•
•
It is recommended to charge the batteries within the
temperature range of 10°C to 40°C (50°F to 104°F).
Prolonged charging is not recommended. Typical charging
guidelines are shown in the above table.
Charging Lithium Ion Batteries
The following are approximate charge times to 90% capacity using
Motorola iDEN Approved Lithium Ion battery Chargers. For
optimal battery life, use a Motorola iDEN Approved Lithium Ion
charger with your Motorola iDEN Lithium Ion battery. Other
chargers may not fully charge your Lithium Ion battery or may yield
a reduced number of cycles.
Battery Operating Instructions
• Battery performance will degrade at extreme temperatures.
Do not store your battery where temperatures will exceed
60°C (140°F) or fall below -20°C (4°F).
• This Lithium Ion battery has a self discharge rate and
without use, will lose about 1% of its charge per day.
• The battery capacity will degrade if stored for long periods
while fully charged. If long term storage is required, store at
half capacity.
• The Motorola iDEN Approved Lithium Ion chargers will
provide optimum performance. Other chargers may not fully
charge your iDEN Lithium Ion battery or may yield reduced
number of charge cycles.
• Charger lights on Motorola iDEN chargers may flash or
extinguish during normal charger use.
• If the battery appears inoperative, the internal protection
circuitry may have been activated. Remove the battery from
the portable and put it into the charger for several minutes to
reset the circuitry.
GETTING STARTED
59
i1000
TRAVEL CH ARG ER
The NTN6197A Travel Charger allows a battery to be charged from
an AC outlet. On one end of the travel charger, an accessory
connector attaches to the bottom of the portable unit. At the other
(AC outlet) end of the device is a compact housing containing the
charging circuitry and a plug-in power supply. A lightweight cable
connects the two ends (accessory connector and supply).
A green LED on the accessory connector indicates that the Travel
Charger is plugged in
Installing the Travel Charger
Accessory Connector
Transformer
Figure 1: Installing the Travel Charger
1. While holding the i1000 with its front toward you, insert the
accessory connector with the Motorola logo facing you into slot
on the bottom of the i1000 until you hear an audible click.
2. Plug the Travel Charger’s transformer into an AC wall outlet.
The power light (green LED) on the accessory connector will
come on.
Travel Charger Operating Specifications
Input voltage range: 90-264 Vac @ 50/60 Hz.
Operating ambient temperature: 0°C to +50°C
60
GETTING STARTED
i1000
VEH ICULAR BATTERY CH ARG ER
The NTN8655A Vehicular Battery Charger (VBC) enables in-
vehicle communications by providing power to the portable unit as
well as charging the portable’s Lithium Ion battery. The VBC is a
power supply that allows the portable’s internal charger to charge the
battery.
The power light (green LED) will light when the VBC is receiving
power.
Cigarette Lighter
Adapter
Accessory
Connector
Figure 2: Installing the Vehicular Battery Charger
Installing the Vehicular Battery Charger
(Refer to Figure 2)
1. Attach the Vehicular Battery Charger’s accessory connector to
the bottom of the portable. While holding the i1000 with its
front toward you, insert the accessory connector with the
Motorola logo facing you into slot on the bottom of the i1000
until you hear an audible click.
2. Remove the vehicle’s cigarette lighter plug from the cigarette
lighter receptacle.
3. Plug the Vehicular Battery Charger’s cigarette lighter adapter
into the cigarette lighter receptacle. The power light (green
LED) will come on.
4. The i1000 portable may be left off, turned on, or used.
GETTING STARTED
61
i1000
Removing the Vehicular Battery Charger
1. Unplug the Vehicular Battery Charger’s cigarette lighter adapter
from the vehicle’s cigarette lighter receptacle.
2. Press the latches on the accessory connector.
3. Pull the accessory connector from the bottom of the portable.
Vehicular Battery Charger Operating Specifications
Operating voltage range: 10.8 - 33.0 Vdc.
Operating temperature range: -30°C to +60°C
62
GETTING STARTED
i1000
D ESKTO P CH ARG ER
The NTN8653A Desktop Rapid Charger will charge Motorola
authorized batteries listed on page 59 for the i1000. To charge a
battery, refer to Figure 3 and follow the procedure below:
Front Pocket
Rear Pocket
LED
Indicators
Pin Connector
Power supply cord receptacle
Figure 3: Desktop Rapid Charger
Charging a Battery
1. Plug the flat end of the power-supply cord into the receptacle on
the back of the charger.
2. Plug the transformer end of the power-supply cord into any
standard AC wall outlet. The charger performs a quick power-
up self-test, during which the LED indicators will flash once to
indicate a successful power-up.
3. Insert an i1000 portable with an attached battery, into the
charger's front pocket. This is done by inserting the bottom of
i1000 portable onto the pin connector in the bottom of the
charger's front pocket.
4. If the portable is properly seated in the front pocket, the
charger’s front pocket LED indicator will light red to indicate
that the battery is being charged. (If a battery is in the rear
pocket and the portable with a battery is inserted into the front
pocket, the rear pocket’s LED flashes yellow, indicating that its
battery is waiting to be charged.)
5. The charger has the capability of displaying the battery’s charge
status. The indicator will show the following: solid red=1-30%;
solid yellow=31-60%; flashing green=61-90%; solid green=91-
100%.
GETTING STARTED
63
i1000
Desktop Battery Charger Troubleshooting
If the battery is not charging and there is:
A flashing yellow indicator —
• If a battery is in the rear pocket, the rear pocket’s LED will
continue to flash yellow until the battery in the front pocket
is more than 90% charged (front pocket’s LED is solid
green). This is normal operation.
• In order to protect your battery’s life expectancy, the charger
will not charge a battery whose temperature is below 5°C
(41°F) or above 40°C (104°F). Charging outside of these
temperature limits can drastically reduce the life expectancy
of your battery.
No LED indication —
• Check that the portable with battery, or a battery alone, is
inserted correctly (see “OPERATING INSTRUCTIONS”).
• Make sure the transformer is plugged into an appropriate AC
outlet, and that the connector is properly seated.
• Remove the battery from the charger, and use an ordinary
pencil eraser to clean the four metal contacts on the battery.
Replace the battery.
• If the LED indicator remains turned off, the battery may be
defective and should be replaced.
A flashing red LED indicator—
• Remove the battery from the charger, and use an ordinary
pencil eraser to clean the metal contacts on the battery.
Replace the battery.
• If the LED indicator continues to flash red, the battery may
be defective and should be replaced.
64
GETTING STARTED
i1000
AUD IO AD APTER
Th e NTN8654A Audio Adapter allows you to con n ect an earpiece
m icroph on e to your portable for privacy an d h an ds-free operation .
Th e Audio Adapter th at fits on to th e bottom of th e portable, provides
a stan dard 2.5m m jack con n ection for an earpiece m icroph on e
(NTN8367) or h eadset.
Installation Instructions
Audio Adapter
Connector
2.5mm jack
Figure 4: Installing the Audio Adapter
1. Hold the portable and the Audio Adapter facing you so that you
see the Motorola logo.
2. Insert the Audio Adapter’s connector into the portable’s
receptacle. You will hear the connector snap into place.
Attaching/Detaching the Earpiece Microphone
1. Insert the 2.5mm plug of the earpiece microphone cord into the
jack of the Audio Adapter.
2. Pull on the plug, not the cord, to remove the earpiece
microphone.
Removing the Audio Adapter
1. Press the button on the front of the Audio Adapter. The front
displays the Motorola logo on the button.
2. Pull the Audio Adapter from the portable.
GETTING STARTED
65
i1000
NOTES:
66
GETTING STARTED
i1000
SAFETY AND GENERAL
INFORMATION
IMPORTANT! Read this information before using your
portable.
RAD IO O PERATIO N
Your portable’s radio component contains a transmitter and a
receiver. When it is ON, it receives, and also transmits, radio
frequency (RF) energy. The radio operates in the frequency range of
806MHz to 866MHz, and employs digital modulation techniques.
When you use your radio, the system handling your call controls the
power level at which your radio transmits. The power level may
typically vary over a range from 0.01 of a watt to 0.6 of a watt.
•
Expos ur e t o Radio Fr equency Ener gy
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards* previously set by both U.S. and international standards
bodies. The design of your Motorola two-way radio complies with
the FCC guidelines and these standards.
*American National Standards Institute (C95.1 - 1992)
*National Council on Radiation Protection and Measurements
(NCRP-1986)
*International Commission on Non-Ionizing Radiation Protection
(ICNRP- 1986)
To assure optimal radio performance and to ensure that exposure to
RF energy is within the guidelines in the above standards, follow
the operating procedures outlined below.
•
Ef fi cient Radio Oper at ion
The following practices will enable your radio to operate at the
lowest power level, consistent with satisfactory call quality.
When placing or receiving a phone call, or using the group or private
call functions with the Group/Private Speaker OFF (muted speaker
icon visible in the display), hold the radio as you would a telephone.
GETTING STARTED
67
i1000
Speak directly into the mouthpiece and position the antenna up and
over your shoulder.
When using the radio as a traditional two-way
radio while making group or private calls with the
Group/Private Speaker ON (no speaker icon
visible in the display), hold the radio in a vertical
position with the microphone one to two inches
away from the lips.
For body-worn operation, the antenna should be
kept at least one inch from the body when transmitting.
DO NOT hold the antenna when the radio is “IN USE”.
Holding the antenna affects call quality and may cause the radio to
operate at a higher power level than needed.
•
Ant enna Cons ider at ions
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the radio, or result in violation of ICNRP or FCC
regulations.
Do not use the radio with a damaged antenna. If
a damaged antenna comes into contact with the
skin, a minor burn may result.
!
C a u t i o n
•
Int er f er ence t o Medical and Per s onal
El ect r onic Devices
Most electronic equipment is shielded from RF energy. However,
RF energy from the radio transmitter may affect inadequately
shielded electronic equipment.
Consult the manufacturer(s) of your medical and personal electronic
device(s) (for example, a pacemaker or a hearing aid) to determine if
they are adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information.
Turn your radio OFF in health care facilities when any regulations
posted in the area instruct you to do so. Hospitals and health care
facilities may be using equipment that is sensitive to external RF
energy.
68
GETTING STARTED
i1000
•
Int er f er ence t o Ot her El ect r onic Devices
RF energy may affect improperly or inadequately shielded
electronic operating and entertainment systems in motor vehicles.
Check with the manufacturer or representative to determine if these
systems are adequately shielded from external RF energy. Also
check with the manufacturer of any equipment that has been added
to the vehicle.
Turn your radio OFF before boarding any aircraft to prevent
possible interference to aircraft systems. Regulations of the United
States Federal Aviation Administration prohibit use when the plane
is in the air and require that you have permission from a crew
member to use your radio while the plane is on the ground.
•
Bat t er ies
All batteries can cause property damage, injury or
burns if a conductive material such as jewelry,
keys, or beaded chains touch the exposed
terminals. The material may complete an
electrical circuit (short circuit) and become quite
hot. Exercise care in handling any charged
battery, particularly when placing it inside your
pocket, purse or other container. To protect
against a short circuit when the battery is
detached from the phone, keep the battery in the
insulated protective case provided with the
battery.
!
C a u t i o n
•
Us e Whil e Dr iving
Check the laws and regulations on the use of telephones in the areas
where you drive. Always obey them.
When using the phone while driving, please:
• give full attention to driving and to the road;
• use hands-free operation, if available; and
• pull off the road and park before making or
answering a call if driving conditions so require.
!
C a u t i o n
GETTING STARTED
69
i1000
•
Chil dr en
Do not allow children to play with your radio. It is
not a toy. Children could hurt themselves or
others (by poking themselves or others in the eye
with the antenna, for example). Children also
could damage the radio, or make calls that
increase your service bills.
!
C a u t i o n
•
Bl as t ing Ar eas and Expl os ives
DO NOT operate your radio near electric blasting
caps, or in a blasting area, to avoid the possibility
of triggering an explosion. Turn your radio OFF
when in a “blasting area” or in areas where such
requirements are posted.
!
W A R N I N G
70
GETTING STARTED
i1000
•
Pot ent ial l y Expl os ive At mos pher es
Turn your radio OFF and do not replace the
battery when in any area with a potentially
explosive atmosphere. It is rare, but your radio or
its accessories could generate sparks which might
!
trigger an explosion.
W A R N I N G
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They
include areas such as below deck on boats, fuel or
chemical transfer or storage facilities, and areas
where the air contains chemicals or particles, such
as grain, dust, or metal powders.
Do not transport or store flammable gas, liquid, or
explosives in the compartment of your vehicle that
contains your radio or accessories.
Vehicles powered by liquefied petroleum gas (such
as propane or butane) must comply with the
National Fire Protection Standard (NFPA-58).
For a copy of this standard, contact the National
Fire Protection Association. One Batterymarch
Park, Quincy, MA 02269, Attn: Publications Sales
Division.
GETTING STARTED
71
i1000
•
For Vehicl es Equipped wit h an Air Bag
An air bag inflates with great force. DO NOT
place objects, including communication
equipment, in the area over the air bag or in the
!
air bag deployment area. If the communication
equipment is improperly installed and the air bag
inflates, this could cause serious injury.
W A R N I N G
Installation of vehicle communication equipment
should be performed by a professional installer/
technician qualified in the requirements for such
installations. An air bag’s size, shape, and
deployment area can vary by vehicle make,
model, and front compartment configuration (for
example, bench seat vs. bucket seats).
Contact the vehicle manufacturer’s corporate
headquarters, if necessary, for specific air bag
information for the vehicle make, model, and
front compartment configuration involved in your
communication equipment installation.
CLEAN IN G IN STRUCTIO N S
Clean the external surfaces with a damp cloth, using a mild solution
of dishwashing detergent and water. Some household cleaners may
contain chemicals which could seriously damage the unit. Avoid the
use of any petroleum-based solvent cleaners. Also, avoid applying
liquids directly on the portable unit.
FO R FURTH ER IN FO RM ATIO N
For more detailed information on Motorola’s iDEN products, please
see the iDEN web site located at
Be sure to carry the Pocket Card with you for quick reference.
72
GETTING STARTED
i1000
O WN ER’S IN FO RM ATIO N
Mobile Equipment Identifier (IMEI)
_____________________________
Own Phone Number
_____________________________
Own Private Number
_____________________________
Date Purchased
______________
Dealer Telephone Number
_______________________
Customer Service Number
_______________________
73
GETTING STARTED
i1000
PRIVATE N UM BER D IRECTO RY
Private Number
Name
1
2
3
4
5
6
7
8
9
TALKG RO UP D IRECTO RY
Talkgroup Number
Name
1
2
3
4
5
6
7
8
9
74
GETTING STARTED
i1000
|