i410
User’s Guide
Class B Digital Device
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
As a personal computer peripheral, this device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i410
Model Number: H76XAH6JR7BN
FCC-ID: IHDP56KR2
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
FCC Notice to Users
The following statement applies to all products that have
received FCC approval. Applicable products bear the FCC logo,
and/or an FCC ID in the format FCC-ID: IHDP56KR2 on the product
label.
Motorola has not approved any changes or modifications to this device by
the user. Any changes or modifications could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21.
•
Consult the dealer or an experienced radio/TV technician for
help.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may
not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
See RSS-GEN 7.1.5.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048
Note: Do not ship your phone to the above address. If you need to
return your phone for repairs, replacement, or warranty service,
please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7813A
HELLOMOTO
Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson.
Ready
10:05pm 10/23
Right Soft Key
Perform function
in lower right
display.
Left Soft Key
Perform function
in lower left
Speaker
display.
On/Off Key
Smart Key
Web Key
OK Key
Menu Key
From home screen,
open main menu.
Volume Keys
PTT Button
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
Talk Key
Make &
answer calls.
Micro USB
4-Way Navigation
Key
Audio Jack
Connector
Connects charger
and accessories.
1
check it out
Ready
10:05pm 10/23
Ready
10:05pm 10/23
2
Press the Navigation Key
up, down, left or right
to highlight a menu feature.
Customizable r key
3
4
that can be used
to open the
Settings screen
Press the r key
to select.
Press and hold the
1
@
Power Key
for a
few seconds, or until
the screen lights up,
to turn on your phone.
2
contents
volume . . . . . . . . . . . . 51
customize. . . . . . . . . . . . . 61
other features . . . . . . . . . 65
contents
3
Motorola Limited
and Canada . . . . . . . . 81
Hearing Aid
RF Energy
Mobile Phones . . . . . 84
Information From
Compatibility. . . . . . . . 72
Caring for the
Organization . . . . . . . 85
Recycling . . . . . . . . . . 74
Patent and
Information . . . . . . . . 86
contents
4
menu map
main menu
0
VoiceRecord
N
PT Manager
p
L
Call Alert
•
[New VoiceRec]
•
•
•
•
•
•
•
Quick PTT
Java Apps.
B
j
K
Recent Calls
Send Message
Send Picture
Send Event
•
Java System
Media Center
u
Settings
Shortcuts
Send My Info
Send Contact
Configure
•
(see next page)
•
•
•
•
•
•
•
•
•
•
[New Entry]
t
Ring To nes
1)Shortcuts
2)Cntcs[New Contact]
3)Recent Calls
4)Contacts
•
•
•
•
Vibrate All: On/Off
E
Messages
Ringer
Vibrate
Silent
•
[Create Message]
•
•
[Create Txt Msg]
5)Datebook
[Create MMS Msg]
6)Messages
7)VoiceRecord
8)Net
•
•
•
•
•
Voice Mail
Inbox
c
GPS
•
•
•
Position
Privacy
Interface
Drafts
9)Call Forward
Outbox
Net Alert
A
Contacts
P
Call Forward
Datebook
Memo
•
[New Contact]
C
Bluetooth
D
l
1
J
o
M
Profiles
•
•
•
•
•
Hands Free
Link to Devices
Device History
Setup
Call Timers
Net
•
•
•
•
•
•
•
•
Last Call
Find Me
My Info
Phone Reset
Phone Lifetime
Prvt/Grp Reset
Prvt/Grp Life
Circuit Reset
Circuit Lifetime
Kbytes Reset
•
•
•
•
•
•
•
•
My Name
Line 1
This is the standard Main Menu layout.
Your phone’s menu may be a little
different.
Private ID
Group ID
Carrier IP
IP1 Address
IP2 Address
Circuit Data
menu map
5
settings menu
Display/Info
2-Way Radio
Security
•
•
•
•
•
•
•
•
•
Wallpaper
Text Size
Theme
•
•
•
•
•
•
•
Tkgrp Silent
•
•
•
•
•
Phone Lock
Tkgrp Area
Keypad Lock
SIM PIN
One Touch PTT
Alert Type
Home Icons
Backlight
Clock
GPS PIN
PTT Quick Notes
On/Off PTT
Store Rcvd Info
Change Passwds
Advanced
Menu View
Large Dialing
Language
•
•
•
•
•
•
•
Alert Timeout
Personalize
Headset/Spkr
Connectivity
Reset Defaults
Return to Home
Transmitters
Baud Rate
•
•
•
•
•
•
•
•
•
Menu Options
Phone Calls
Up Key
•
•
•
•
•
•
•
•
•
•
•
•
•
Set Line
Down Key
Left Key
Right Key
Center Key
Left Sftkey
Right Sftkey
Power Up
Any Key Ans
Auto Redial
Call Waiting
Auto Ans
Flip Activation
Minute Beep
Call Duration
TTY
Hearing Aid
Notifications
DTMF Dialing
Prepend
Volume
•
•
•
•
•
•
•
•
Line 1
Messages
Earpiece
Speaker
Keypad
Java Earpiece
Java Spkr
Data
menu map
6
use and care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to water, rain,
extreme humidity, sweat, or other
moisture. If it does get wet, don’t try to
accelerate drying with the use of an
oven or dryer, as this may damage the
phone.
Don’t expose your phone to dust, dirt,
sand, food, or other inappropriate
materials.
extreme heat or cold
cleaning solutions
To clean your phone, use only a dry soft
cloth. Don’t use alcohol or other
cleaning solutions.
Avoid temperatures below 0°C/32°F or
above 45°C/113°F
.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
7
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray edged pages
at the back of this guide.
3
Press the
r
to select it.
symbols
This means a feature is network/
subscription dependent and may
not be available in all areas. Contact
your service provider for more
information.
about this guide
This guide shows how to locate a menu
feature as follows:
This means a feature requires an
optional accessory.
Find it:
/
>
Settings
This means that, from the home screen:
1
2
Press the menu button
/
to open the
Main Menu
.
Press the navigation key to scroll to
Settings
.
essentials
8
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
SIM card
insert the SIM card
Turn off your phone and remove your battery
before you install or remove a SIM card.
battery
Carefully slide the SIM card into your phone,
until it lies flat in the SIM card slot.
battery installation
1
Open the micro-USB and headphone
jack connector covers. Slide the battery
door down until it is released.
essentials
9
battery charging
New batteries are not fully charged.
2
3
Remove battery door.
Insert battery as shown below. Push the
battery down until it snaps in place.
charge using the charger
1
Pull out the connector cover, and insert
the charger into the accessory connector
on your phone as shown.
4
Replace the battery door.
2
Plug the other end of the charger into the
appropriate electrical outlet.
When you charge the battery, the battery level
indicator at the upper right of the screen
shows charging progress. At least one
essentials
10
segment of the indicator must be visible to
ensure full phone functionality while charging.
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will
not turn On, but it will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s micro-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or
bus-powered USB hub). Typically, USB
high-power connectors are located directly on
your computer.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
maintained approximately between 80% and
95% of the battery's capacity. Cables and
software drivers are available in Motorola
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
the USB cable is connected between the
computer and the phone, the phone will
TM
Original data kits, sold separately.
Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging. Of course, unplugging the
essentials
11
charger from the wall will prevent the battery
from overcharging.
turn it on & off
To turn on your
battery indicators
phone, press and
d
e
f
g
The battery is at approximately 100%
to 90% capacity when the indicator is
blue and displaying three bars.
The battery is at approximately 65%
capacity when the indicator is green
and displaying two bars.
The battery is at approximately 10%
capacity when the indicator is yellow
and displaying one bar.
The battery is at approximately 5%
capacity when the indicator is red
and has a flashing red bar.
hold
@
for a few
seconds or until the
display turns on.
To turn off your phone, press and hold
two seconds.
@
for
Note: If you press
seconds, the handset will power “On” on
@
for more than four
enable security
You must enable security the first time you
power on you phone or within 10 days of first
activation.
h
The battery is charging.
1
Press
-
under Ok.
essentials
12
2
3
You are prompted to enable security.
Press under Yes. A series of screens
followed by the default home page
displays.
1
2
If you want to answer the call on the
handsfree speaker phone, press the
-
speaker key
s
with the flip closed. To
hang up press the smart key
(
.
Press
@
to return to the home screen.
If you want to answer the call using the
handset, just open the flip and press
To hang up press or close the flip.
`
.
@
make a phone call
Enter a phone number and press
a call or use a voice name. See “voice
Note: You must have the Flip Activation feature
`
to make
make a private call
Note: For best call quality avoid covering the
antenna with your hand.
With Private calls service, you use your phone
as a long-range, digital 2-way radio using one-
to-one Private calls.
To hang up press
@.
Your Private ID is the number at which you
receive one-to-one Private calls.
answer a phone call
When your phone rings and/or vibrates, you
have the following options to answer:
Note: PTT means Push to Talk / Walkie-Talkie.
essentials
13
To make a private call
2
3
Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
1
Enter the Private ID you want to call.
2
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
Release the PTT button to listen.
To end the call press
-
under Exit.
3
Release the PTT button to listen.
store a phone number
or private ID
To end the call press
@.
Note: A Private call ends automatically if there
is no activity on the call for a few seconds.
You can store a phone number or Private ID in
Tip: To let someone know you want to talk to
them on a Private call, press
Contacts
:
-
under Alert.
1
2
Press
/
>
Contacts [New Contact].
>
Enter a name for the new entry Each
.
entry’s name can contain up to 20
characters.
answer a private call
1
When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
3
Select Ringer if you wish to assign a
specific ring tone to that phone number.
essentials
14
4
Select a type for the entry (Mobile
IP or Other).
To store a Private ID, choose Private
,
Private
,
Find it:
/
>
Contacts
Work1 Work2, Home, Email, Fax, Pager,
,
1
Scroll to the Contacts entry.
.
Tip: By pressing the first letter of the
name of the Contacts you want, you will be
taken to all the contact names starting
with the letter you pressed.
5
Enter the number for the entry and press
under Done to save the entry.
-
Tip: Before saving the entry, you can save
more information. You can store E-mail
addresses, or IP addresses. You can assign
each number a speed dial number and voice
name.
2
3
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile Private, Work1, Work2, Home,
,
After you have saved the number, the new
Contacts entry is displayed.
etc.).
If you choose a phone number, press
to call the entry.
`
call a stored phone
number or private ID
Shortcut: From the home screen press
under Contcs
or
If you choose a Private ID press and hold
the PTT button to call the number.
-
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
or
essentials
15
holding the PTT button, even if the Private ID
is not the type of number displayed.
Note: The messaging menus may look
slightly different, depending on the
messaging setup of your phone.
your phone number and
Private ID
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
Find it:
Tip: Want to see your phone number or
Private ID while you’re on a call? Press
/
>
My Info
Shortcut: From the home screen press
-
/
>
under Msgs
>
/
>
Text Msg Setup.
My Info
.
or
text messages
Find it:
/
>
Messages
>
/
>
Text Msg Setup
The following options become available:
If your service provider offers text messaging,
your phone sends text messages using
Mobile Originated Short Messaging Services
(MOSMS) and receives text messages from
other phones that are using MOSMS.
option
Signature: Enter your signature (up to 11
characters long).
Delivery Rpt: Set this option to On if you want
your phone to show you when the
message has been delivered.
essentials
16
Press
you entered.
-
under Done to save the information
option
Srvc Cntr No: Enter the phone number of your
service center. If you do not know this
number, contact your service provider.
receive a text message
1
To view the message press
To dismiss the message notification press
under Exit
-
under Read.
Expire After: This is the amount of time
messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
2
-
.
Note: If your phone is powered off when you
receive a text message, your phone notifies
you the next time you power it on. If you are
out of your coverage area, your phone alerts
you when you return to your coverage area.
Scroll to select the number of days you
want your messages to be saved.
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted. See “cleanup” on page 42.
Tip: While reading a text and numeric
message that contains a phone number, you
Quick Notes: Quick notes are short, pre-written
text messages that you can create, edit,
and send in your text messages. You can
store up to 20 quick notes. A quick note
may be up to 30 characters long.
can press
`
to call that number.
read from the message center
1
From the home screen press
-
under
Msgs
>
Inbox
>
Text Inbox.
You can create a [New Note] or press
-
under
Edit to change the pre-written quick notes.
essentials
17
2
3
Select the message you want to read or
press the number of the message you
want to read. If the message fills more
than one screen, scroll to read it.
you want to send the message to and
press
r.
or
Press
-
under Browse, and select Recent
Tip: Scrolling through one message lets
you view the next message.
Calls Contacts or Memo to find the number you
,
want.
To reply to the message, press
-
under
3
Select Msg and enter the text of the
message or to use a quick note press
under Browse and scroll to the quick note
you want.
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
-
number in Contacts, press
/.
4
Press
/
>
Set Send Method and select Text
,
Fax
,
x400
,
Paging Email ERMES, or Voice
,
,
.
create and send text messages
5
If you want to send the message, press
under Send or to delete the message
without sending it, press under Cancel
1
From the home screen press
-
under
.
-
Msgs
>
[Create Message]
>
[Create Txt Msg]
-
.
or
Note: If you want to request confirmation
of delivery press
Select Inbox
>
Text Inbox, or Outbox
>
Text Outbox,
/
>
Delivery Report
>
On.
or Drafts Text Draft
>
.
2
To address the message use the keypad
to enter the phone number of the person
essentials
18
use drafts
delete sent text messages
When you save a message as a draft, it is
saved in the drafts folder.
Shortcut: From the home screen press
-
under Msgs
>
Outbox
>
Text Outbox.
Shortcut: From the home screen press
under Msgs
-
1
2
3
Scroll to the message you want to delete.
>
Drafts
>
Text Draft.
Press
Press
-
-
under Delete
.
1
Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press
-
2
To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
under Msgs
>
Outbox
>
Text Outbox
.
1
2
Press
Press
/
>
Delete All
.
-
under Yes to confirm.
resend text messages
Shortcut: From the home screen press
-
go to a website
If a message contains one or more website
URLs, you can go to that website. See “go to
under Msgs
>
Outbox
>
Text Outbox.
1
2
Scroll to the message you want to resend
or press the number of the message you
want to resend.
Press
-
under Resend.
essentials
19
Shortcut: From the home screen press
-
manage memory
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
under Msgs Text Msg Setup Mem Mtr-Other.
>
/
>
>
The text inbox holds 20 messages. If the text
inbox is full, you cannot receive messages
until you delete some.
The outbox and drafts folder share memory
space. Together they can hold 30 messages.
If the outbox and drafts folder memory is full,
you cannot send messages or save drafts
until you delete some.
To view the amount of memory available in
your text inbox:
Shortcut: From the home screen press
-
under Msgs Text Msg Setup Mem Mtr-Inbox.
>
/
>
>
To view the amount of memory available in
your outbox and drafts folder:
essentials
20
main attractions
Items in the media center can be sent in
media center
The media center lets you access pictures and
audio recordings stored in your phone’s
memory.
Pictures in the media center can be sent in
Private calls using Send via PTT.
Audio files supported by the Media Center
include:
The following audio recordings can be
accessed through the media center:
Format
.au
Sampling Rates/Bit Rates
8 KHz/8 kbps
•
•
Voice records
Musical ring tones in the list of ring
tones
8 KHz, Type 0
.midi
.mp3
.wav
8 KHz/8 kbps
8 KHz/64 kbps
•
•
Audio recordings saved from MMS
messages received
Audio recordings downloaded to your
phone
Note: Stereo audio files are not supported by
the Media Center.
main attractions
21
Image files supported by the Media Center
include:
•
Contact information
You can choose to send My Info and contact
information to any Private ID.
Format
.png
Max. Image Size (in pixels)
640 x 480
You can choose to send pictures, messages,
events to the Private ID you are engaged in a
a Private call with, Private IDs on the Recent Calls
640 x 480
.gif
640 x 480
.jpg
list, and Private IDs stored in Contacts
.
127 x 127
.wbmp
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
PTX features
With Push To View features, your phone
can send and receive the following
items through Private calls with other phones
that have this capability:
•
•
•
•
Short text messages
Pictures
You can turn your phone’s ability to send and
receive messages, pictures, events on and
off.
Datebook events
My Info
main attractions
22
begin a message from the Contact or
the Recent Calls list
send messages
The Push to Send Messages feature
lets you send short text messages
through Private calls.
1
From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with. The message won’t be
stored in the recent calls list.
2
Press
/
>
Use PTT Feature
>
Send Message.
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
begin a message and choose a
recipient
You can begin a message during a Private call,
Find it:
/
>
PT Manager
>
Send Message
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
from the Contacts list, the Recent Calls list, or from
the PT Manager
begin a message during a Private call:
While in a Private call, press
.
create messages
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
/
>
Use PTT Feature
>
Send Message.
main attractions
23
send. Your message may be up to 400
characters long.
reply to a message
1
2
3
View the message.
Press under Reply
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
-
.
Create the message and press the PTT
button to send it.
send pictures
You can send pictures stored in Media
Center through Private calls. The picture you
send appears on the Private call recipient’s
display.
send a completed message
After you have completed your message,
press the PTT button to send it.
If the recipient accepts the picture, their
phone saves the picture.
receive messages
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply.
Continue? appears and you are prompted to
respond.
When you receive a message, a message
notification appears on the display. To view
the message press
r.
To dismiss the message press
-
under
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
Dismiss
.
main attractions
24
2
3
Press
/
>
Send Via...
>
Send via PTT
.
send a picture during a call
A list of contacts that have Private IDs and
are able to receive pictures appears.
1
While in a Private call, press
Picture or press
Send Picture
-
under
>
/
>
Use PTT Feature
.
Select the name of the person you want
to send the picture to.
A list of pictures that can be included in a
Private call appears.
4
Press the PTT button to send the picture.
2
3
4
Select the picture you want to send.
5
When prompted, press the PTT button to
resume the Private call.
Press the PTT button to send the picture.
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
from the PT Manager:
Find it: PT Manager Send Picture
/
>
>
1
Select A Contact, or A Recent Call to see a list of
entries that can receive pictures.
5
When prompted, press the PTT button to
resume the Private call.
2
Select the entry containing the Private ID
you want to send the message to.
start a call by sending a picture
3
Select the picture you want to send.
from Media Center
Find it:
4
Press the PTT button to send the picture.
/
>
Media Center
1
Select the picture you want to send.
main attractions
25
5
Once picture has been sent, when
prompted press the PTT button to resume
the call.
prompted to respond. Press
accept the picture.
-
under Yes to
clear a picture from the display
receive a picture
If you want to clear a picture from your
phone’s display while still on a call, press
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
/
>
Clear Screen.
The picture will not appear on the display
again the next time you receive a call from
person who sent it. This does not delete the
Pictures you receive are saved to your phone’s
memory. They are accessible through Media
picture from Media Center.
Center
.
send My Info
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
1
2
While in a Private Call press
Send via PTT, and push the PTT button to
send.
/
>
Tip: If you want to stop the transmission
before it is finished, press
@.
or
Note: The first time you accept a stored
picture after turning the phone on, Picture Fees
May Apply. Continue? appears and you are
From the home screen press
Send via PTT and push the PTT
button to send.
/
>
My Info
>
/
>
main attractions
26
1
Select On or Off.
set my info sending option
When you make a call in which your
You can control what portion of the
information in My Info is sent and
whether it is sent automatically in every call or
only when you choose to send it.
information is sent automatically, the name
you entered in the My Name field of My Info
appears on the display of the recipient’s
phone, even if your name and Private ID are
not stored in the recipient’s Contacts.
Find it:
Info to Send
/
>
PT Manager
>
Configure
>
PTT My Info
>
1
Select or remove the fields you want to
send.
send contact information
1
2
3
While in a Private Call press
/
>
2
Press
-
under Done.
Use PTT Feature
.
The information your phone sends always
includes My Name and Private. You may also send
Line 1 Carrier IP, and Circuit Data depending on your
Select Send Contact and select the contact
information you want to send.
,
Push the PTT button to send.
or
sending options.
automatic sending
To control whether you send your information
automatically:
1
From the home screen press
/
>
PT Manager
>
Send Contact.
Find it:
/
>
PT Manager
>
Configure
>
PTT My Info
>
Auto Send
main attractions
27
2
Enter the Private ID number of the person
you want to send the Contact information
one touch PTT
Find it:
/
>
PT Manager
>
Configure
>
One Touch PTT
to or press
-
under Browse
.
One Touch PTT sets your phone to do any of the
following each time you press the PTT button
from the home screen:
3
Select from Recent Calls
,
Contacts, or Memo.
4
Select the contact information you want
to send and push the PTT button.
option
turn PTT features on and off
Off: Nothing happens when you press the
PTT button from the home screen.
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
Last Call: Call the most recent Private ID or
Group on the recent calls list.
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Assigned No.: Call a Private ID you assign.
Enter the number using your keypad, or
press
Calls, or Memo
-
under Search. Select Contacts, Recent
.
Find it:
/
>
PT Manager
Select On/Off PTT
Check or uncheck Messages
Events
>
Configure
1
2
.
,
Pictures and/or
Send Message: Go to the first screen to send a
message.
.
main attractions
28
or
option
2
3
Select Send Message Send Picture, Send Event, Send
My Info, or Send Contact. After choosing what
PTT item you are sending, select a
,
Send Picture: Go to the first screen to send
Send Event: Go the first screen to send a
Datebook event.
contact and press the PTT button to send.
or
Send My Info: Go to the first screen to send My
Select Configure to configure your PTT Quick
Notes
,
PTT My Info
,
One Touch PTT, or On/Off PTT
.
Send Contact: Go to the first screen to send a
contact. See “send contact information” on
MMS
Multi-Media Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures and audio recordings.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
create a message
Shortcut: From the home screen press
-
Find it:
/
>
PT Manager
under Msgs
>
[Create Message]
>
[Creat MMS Msg].
1
Select Quick PTT to quickly find a contact
that has a Private ID.
or
main attractions
29
Find it:
[Creat MMS Msg]
/
>
Messages
>
[Create Message]
>
more message options
To view more message fields in a message
1
Select To and add the phone number or
email address or select from Contacts or
you are creating, select .....MORE..... or press
-
under More
.
Recent Calls and press
-
under Back.
option
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
and press
When you are finished addressing the
message, press under Back
To enter or edit the body of the message:
Subject: Create or edit the subject line.
Attach: Attach a picture, audio file or voice
record.
-
under Remove.
Cc: Send a copy of this message to
someone else.
-
.
Auto Replies: Allows you to create a list of
possible short answers for the recipient to
choose when replying to your message.
2
Select Mesg and enter text or press
under QNotes to select a pre-written quick
-
Priority: Set priority Normal or High
Report: Set receipt confirmation On Delivery
Valid Until: Set a date after which attempts to
deliver the message end, or press under
.
note.
.
3
Press
-
under Back and
-
under Send.
-
No Date
.
main attractions
30
reply to a message
quick notes
You can reply to a message while you are
viewing it, or while a previously viewed
message is highlighted in the message
center. You cannot reply to unread messages.
When you are filling in the Message and Subject
message fields, you can add ready-made
words or short phrases called Quick Notes.
After you add these words or phrases, you
can edit them as you would any other text.
To reply to a message:
1
While you are creating a message, scroll
to or select Message or Subject
1
2
View the message you want to reply to.
To reply to the sender only, press
under Reply or if you wish to include all the
people copied in the message, press
under Reply All
.
-
2
Press under QNotes.
-
-
Select the Quick Note you want to insert
into the message.
.
A list of short phrases appears. Select any
of these phrases to add it to your
3
Press
-
under Send.
attach a picture, audio and
voice recording
You can attach one or more pictures, audio or
voice recordings from your phone into the
body of the message. You can include text in
messages or select [Create Reply]
.
3
Edit any message fields you want to
change.
4
Press
-
under Send.
main attractions
31
the body of your message in addition to these
items.
create a new voice record
You can create a new voice record to send
with a message:
While you are filling in the Attach field, press
[New]
>
Browse Pictures or Browse Audio.
1
2
3
Press
/
or press
-
under Attach
>
[New].
A list of available pictures, audio and voice
recordings appears.
Select Record Voice
.
Say the message you want to record into
the microphone.
Select the picture, audio or voice record you
want to attach.
4
When you are finished recording,
Tip: To view or listen to the item before
press
r.
attaching it, highlight it and press Preview
.
5
When you are finished, press
-
under
Note: You can only attach audio files and
pictures if they are not forward locked and if
their DRM settings do not prevent you from
sending.
Done
.
The voice record is attached to the message
and saved to the list of voice records.
Forward locked items are usually copyright
protected, and you cannot share them with
anyone, such as in Private calls or by
uploading them from your phone.
remove an attachment
To remove an attachment in a message you
are creating:
1
Select Attach.
main attractions
32
2
3
Scroll to the attachment you want to
remove.
send a draft
Shortcut: From the home screen press
-
-
Press
/
>
Unattach.
under Msgs
>
Drafts
>
MMS Drafts.
1
2
Select the draft you want to send.
Press under Send
drafts
-
.
While you are creating a message, you can
save it in the MMS drafts folder before you
send it.
edit a draft
Shortcut: From the home screen press
under Msgs
You can view, edit, send, or delete saved
drafts.
>
Drafts
>
MMS Drafts.
Select the draft you want to edit and press
r
.
save a message in the MMS
drafts folder
From the Message center press
delete a draft
When you send a draft, it is removed from the
MMS drafts folder.
/
>
Save.
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
To delete a message in the MMS drafts folder
without sending it, scroll to the message you
want to delete and press
under Yes
-
under Delete and
-
.
main attractions
33
2
Press Resend.
MMS outbox
Note: If your message was sent successfully,
Resend will not appear as an option.
MMS messages you have sent or tried to
send are stored in the MMS Outbox.
check delivery status
forward items from the outbox
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
Shortcut: From the home screen press
under Msgs
-
>
Outbox
>
MMS Outbox.
1
Scroll to the message you want to
forward.
Shortcut: From the home screen press
under Msgs
-
>
Outbox
>
MMS Outbox.
2
3
Press
/
>
Forward.
1
2
Scroll to the message you want to view.
Press
Edit and send your message.
/
>
Delivery Status.
resend
delete a message
If a message was not sent from your handset,
you can resend it.
1
Scroll to the message you want to delete.
2
Press
or
- under Delete.
Shortcut: From the home screen press
under Msgs
-
>
Outbox
>
MMS Outbox.
1
Scroll to the message you want to resend.
3
Press
/
>
Delete Multiple.
main attractions
34
4
Select the message or messages you
want to delete.
If you dismiss the notification, the message is
not deleted. It can be accessed through the
message center.
5
Press
-
under Delete to confirm.
If you are not on a phone call when you
receive a message, your phone sounds a
notification tone every 30 seconds until you
access the message or dismiss the alert.
receive a message
When you receive an MMS message, a
message notification appears on the display.
If you are on a call when you receive a
message, your phone may sound a
notification tone during the call or after you
end the call, depending on how you set your
notification options.
1
2
To view the message press
r.
If the message fills more than one screen,
use the navigation key to scroll down and
read the remaining text.
message notifications
set notification options
When you receive a message, your phone
notifies you with text on the display, a
notification tone or vibration.
To control whether your phone sounds
message notification tones while you are on a
phone call:
You can access the message or dismiss the
notification.
Find it:
/
>
Settings
>
Phone Calls> Notifications.
main attractions
35
Select from the following options:
If a message contains pictures or audio
recordings in the body of the message,
highlight each picture or audio recording to
view or play it.
option
Receive All: Tones sound during calls for all
types of messages.
If a message contains a picture or audio
recording as an attachment, open the
attachment to view the picture or play the
audio recording.
Msg Mail Only: Tones sound during calls for
mail messages; tones for all other types of
messages are held until you end calls.
Delay All: Tones for all types of messages are
held until you end calls.
open attachments
Note: Delay All is the default setting.
1
View the message.
2
Highlight the attachment you want to
Tip: To set notification options during a call
open and press
r. Attachments appear
press
/
>
Call Setup
>
Notifications.
at the end of a message.
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
embedded objects and
attachments
Messages may contain pictures or audio
recordings as part of the body of the message
or as attachments.
main attractions
36
2
Create and send your message.
Embedded objects and attachments are
included when you forward a message.
view received messages from
the message center
Shortcut: From the home screen press
under Msgs
-
>
Inbox
>
MMS Inbox.
lock and unlock messages
use auto replies
Locked messages cannot be deleted until you
unlock them.
If the message you are replying to was sent
with auto replies, it contains a numbered list
of possible replies for you to send. Press the
number of the reply you want to send. The
reply is sent immediately without further
action.
1
View the message you want to lock or
unlock.
2
Press
Unlock Message
/
>
Lock Message or
.
/
>
call a number in a message
delete unread messages
If a message you receive contains a phone
number or Private number in the From field,
the To field, the Cc field, the subject line, or
the body of the message, you can call or send
a call alert to that number.
1
2
3
Scroll to the message you want to delete.
Press
Press
-
-
under Delete
.
under Yes to confirm.
forward a message
1
Press
/
>
Forward.
main attractions
37
4
To store the number or email address as a
new entry, select [New Contact]
send a call alert
.
1
View the message.
To store the number or email address to
an existing entry, select the entry.
2
Highlight the Private number you want to
alert.
5
6
With the Contacts type field highlighted,
scroll left or right to display the Contacts
type you want to assign the number or
email address.
3
Press
/
>
Alert.
4
Push the PTT button.
store message information to
contacts
Press
-
under Done.
go to a website
If a message contains one or more website
URLs, you can go to that website.
If a message you receive contains a phone
number, Private number, or an email address
in the From field, the To field, the Cc field, the
subject line, or the body of the message, you
can store this information to Contacts.
1
2
View the message.
Highlight the website URL you want to go
to.
1
2
View the message.
Highlight the number or email address
you want to save.
3
Press
/
>
Go To Website.
Note: The entire URL must appear in the
message to allow you to open the website.
3
Press
/
>
Save Number or
/
>
Save Email.
main attractions
38
1
2
View the message.
save an embedded picture or
audio recording
To save a picture or audio recording that is
part of the body of a message you receive:
Highlight the picture or audio recording
you want to delete.
3
Press
/
>
Delete Picture or
/
>
Delete Audio
.
1
2
View the message.
save attachments
Highlight the picture or audio recording
you want to save.
1
View the message.
2
Highlight the attachment you want to
save.
3
Press
/
>
Save Picture or
/
>
Save Audio.
The item will save in the default storage
location.
3
Press
/
>
Save Attachment.
Selected items save to the default storage
location.
Note: Some types of pictures and audio
recordings can be viewed or played, but not
saved.
Note: Some types of pictures and audio
recordings can be viewed or played, but not
saved. You may save pictures and audio
recordings from slide shows individually as
you view or listen to them.
delete an embedded picture or
audio recording
To delete a picture or audio recording that is
part of the body of a message you receive:
main attractions
39
With the flip closed, press the smart key on
save a picture
the top
(. Opening or closing the flip does
1
View the slide show.
not interrupt message transmission.
2
When the picture you want to save
appears, press
/
>
Save Picture.
customize MMS
Find it:
/
>
Messages
>
/
>
MMS Setup
save audio
This option is available from many context-
sensitive menus when you are using MMS.
1
2
3
View the slide show.
Press Save Audio.
/
>
The MMS Setup menu lets you customize
MMS for your handset with the following
options:
If the slide show contains more than one
audio recording, a list of the audio
recordings appears. Select the audio
recording you want to save.
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From field on other
iDEN handsets when they receive
messages from you.
message transmission
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
message transmission from being completed.
main attractions
40
option
option
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
Downloads: Controls whether your phone
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your phone to download new messages
automatically; set the option to Manual if you
want your phone to prompt you before
downloading new messages.
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
Memory Size: Shows the total amount of Used
Free, and total Capacity of the phone’s
memory.
,
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
new quick notes and reply
phrases
create quick notes
1
From the MMS Setup menu, select Quick
Notes or Replies
.
main attractions
41
2
3
Select [New Quicknote] or [New Reply]
.
4
Press
-
under Yes to confirm.
Enter text from the keypad.
cleanup
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
The Cleanup option controls how long
messages remain in the MMS Inbox and MMS
Outbox before they are deleted. You set the
cleanup option for the Inbox and Outbox
separately.
1
2
3
From the MMS Setup menu, select Quick
Notes or Replies
.
The cleanup option only deletes unlocked read
messages from the Inbox, and sent
messages from the Outbox for MMS.
Select the Quick Note or reply phrase you
want to edit.
Edit the text.
Find it:
Cleanup
/
>
Messages
>
/
>
MMS Setup
>
delete only Quick Notes and reply
phrases you have created
1
2
Select Inbox or Outbox.
1
2
3
From the MMS Setup menu, select Quick Notes
or Replies
Choose a cleanup option from the
following list:
.
Scroll to the Quick Note or reply phrase
you want to delete.
option
Off: Messages are never automatically
deleted.
Press
-
under Delete.
main attractions
42
option
option
5 Messages: If you have more than 5
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
F-In F-Out: The earliest message added to the
queue will be the first to be deleted (First in/
first out). (MOSMS only)
Custom: Lets you create a clean-up option of
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
up to 99 messages or 99 days.
3
Press
-
under Yes to automatically delete
messages now or press
delete messages later.
-
under No to
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
delete multiple or all messages
To delete multiple messages, all read and
unread unlocked messages from the MMS
Inbox, all messages in the MMS Drafts folder,
or all successfully sent messages in the MMS
Outbox:
1 Day: Messages are deleted if they are older
than 1 day.
3 Days: Messages are deleted if they are
older than 3 days.
Find it:
/
>
Messages
Drafts, or Outbox.
With these options, messages are deleted
when you exit the message center after
setting the option.
1
Select Inbox
,
main attractions
43
2
3
Press
Outbox
/
>
MMS Inbox
,
MMS Drafts, or MMS
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
>
/
>
Delete Multiple, and check the
messages you want to delete.
or
Select Delete All and press
confirm.
-
under Yes to
Find it:
/
>
Bluetooth
>
Setup
>
Power
>
On
1
Select Name if you wish to assign a name
to your handset.
Note: Locked messages cannot be deleted
from the Inbox.
2
Select Find Me Time to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
®
Bluetooth
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
Your phone supports the use of wireless
Bluetooth headsets.
Find it:
/
>
Bluetooth
The Bluetooth connection menu contains an
option to search for audio devices.
make a Bluetooth connection
connect your phone with a Bluetooth
headset
Find it:
/
>
Bluetooth
>
Hands Free [Find Devices]
>
main attractions
44
1
2
Follow the instructions on your Bluetooth
headset to set it up to be found.
to that device, enter the same PIN for
both your phone and the device. For
example, if you enter 1234 as the device’s
PIN, then enter 1234 as your phone’s PIN.
Once your Bluetooth headset is set to be
found press
phone will scan the Bluetooth headset
until it finds it. Press when you see the
r
on your handset. Your
5
Press
-
under Ok.
r
Note: This handset offers a Bluetooth auto
pair feature with auto pair compatible
Motorola devices. When bonded via
Bluetooth with a certain device, the pin will
not be required.
name of the Bluetooth headset on your
screen.
3
Your phone requires that you create a
bond in order to connect with a Bluetooth
headset. Press
-
under Yes when you
connect your phone with another
device
are prompted to bond with the headset.
4
Enter the Bluetooth pass key.
Find it:
/
>
Bluetooth Link To Devices
>
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
1
Select the device you want from the list of
found devices on your screen.
2
Create a bond if you are prompted to do
so.
If a device ships without a Bluetooth PIN,
then refer to its user guide to set the PIN
on that device. To establish a connection
main attractions
45
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
send information via Bluetooth
You can use your phone to send Contacts
entries, or Datebook events to another
Bluetooth device.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
Note: If the Handsfree Devices list contains only
one device, then your phone will automatically
try to connect to that device.
Note: Files sent or received may be up
to 200 kb, depending on your service
provider.
1
2
While in a call, press
Press under Yes to power On
Bluetooth.
Select the audio device you want to
/
>
Use Bluetooth.
send Contacts
-
Shortcut: From the home screen press
under Contcs
-
.
3
1
2
3
Select the contact you want to send.
connect to from the list of Handsfree Devices
.
Press
Press
/
>
Send Via...
>
Bluetooth.
-
under Yes to power On
Bluetooth.
main attractions
46
4
Select the device you want to transfer the
contact information to.
To send only the selected instance of the
event, select This Event Only
.
or
or
Search for the device by selecting [Find
To send all instances of the event, select
Devices]
.
Repeat Events
.
5
If prompted, bond with the device.
3
Press
Bluetooth.
-
under Yes to power On
Your phone connects with the device and
transfers the contact.
4
Select the device you want to transfer the
contact information to.
send a Datebook event
Find it: Datebook
or
/
>
Search for the device by selecting [Find
Devices]
1
Select the datebook event you want to
send.
.
5
If prompted, bond with the device.
2
Press
/
>
Send Via...
>
Bluetooth.
Your phone connects with the device and
sends the datebook event.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
main attractions
47
basics
status indicators
Status indicators are shown at the top of the
home screen:
display
1. 2. 3. 4.
5. 6. 7.
The home screen shows when you turn on
the phone. To dial a number from the home
Ready
10:05pm 10/23
screen, press number keys and
`.
Note: Your home screen may look different.
Ready
10:05pm 10/23
Date and
Time
1
2
Signal Strength Indicator: Vertical bars show
the strength of the network connection. You
Left
Right
Soft Key Label
Soft Key Label
can’t make or receive calls when
shows.
1
or
0
Soft key labels show the current soft key
Active Phone Line: 1 indicates phone line 1 is
ready to make calls.
functions. For soft key
page 1.
-
locations, see
basics
48
3
Speaker Off: Sounds associated with Private
calls are set to come through the earpiece
rather than through the speaker.
change the character input mode:
1
When you see a screen where you can
enter text, press to change the
/
character input mode.
4
Ringer Off: Your phone is set to not ring.
2
Select one of the following options:
5
Message Indicator: Shows when you
receive a text message.
entry modes
6
7
Packet Data: Your handset is ready to transfer
Alpha
Press a key several times for
each character.
packet data or is transferring packet data.
Battery Charge Indicator: A fuller battery
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
indicates a greater charge. Recharge the
battery when your phone shows Low Battery
.
Symbols
Numeric
Enter symbols.
text entry
Some features let you enter text.
Enter numbers by pressing the
numbers on the keypad.
Your phone provides convenient ways to enter
words, letters, punctuation, and numbers
whenever you are prompted to enter text (for
example, when adding a Contacts entry or
when text messaging).
Languages Lets you select the input
language.
basics
49
Tip: When entering text, press and hold
#
to
and hold
entire entry.)
-
under Delete or
*
to delete an
change letter capitalization (Abc
>
ABC
>
abc).
3
To accept a word and insert a space,
press
word mode
#
.
Word English Text Input lets you enter text
into your phone by pressing keys just once
per letter.
alpha mode
enter characters by tapping the keypad:
Word English Text Input analyzes the letters
you enter using an intuitive word database
and creates a suitable word. (The word may
change as you type.)
1
Select the Alpha mode.
2
Press the corresponding keys repeatedly
until the desired letter appears. (For
example, to enter the word Jeff, press
5
enter a word using Word Character
Input:
once,
3
two times,
3
three times, and
3
three times again. If you make a
1
Select the Word character input mode.
mistake, press
single character. Press and hold
Delete to erase an entire entry.)
-
under Delete to erase a
-
under
2
Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Jeff, press 5 3 3 3). (If
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
you make a mistake, press
*
-
under Delete
or to erase a single character. Press
basics
50
space after two seconds or when you enter a
character on a different key.
volume
Press the volume keys up
or down to:
Characters scroll in the following order:
characters
•
•
•
turn off an incoming
call alert
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£ $ ¥
change the earpiece
volume during calls
2
3
4
5
6
7
8
9
0
#
*
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
change the ringer
volume from the
home screen
J K L 5
Tip: You can quickly set your ringer to
Vibrate All by holding the down volume
key in the home screen.
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space
Back
basics
51
navigation key
transmitters
Press the navigation key
up, down, left, or right to
scroll to items in the
Note: Consult airline staff about the use of
the Transmitters feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
display. When you scroll
to something, press
r.
Transmitters turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
turned Off.
handsfree speaker
You can use your phone’s hands-free speaker
to make calls without holding the phone to
your ear.
Find it:
/
>
u
>
Advanced
>
Transmitters
>
Off
During a call press the
speaker key
s
to
turn the hands-free
speaker on.
The hands-free speaker stays on until you
press the speaker key or end the call. The
next phone call will redirect the audio back to
the earpiece.
basics
52
may need to adjust your hearing aid (HA)
volume setting.
features for the hearing
impaired
using your phone with a
hearing aid
For best results use the following optimization
procedures and handset setting. They
generally apply as well for users with cochlear
implants:
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
microphone coupling is obtained. You also
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
basics
53
3
Set this option to Off (factory default). This
is the setting for non HA users.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
Approximate telecoil location is just
above the battery.
choose your hearing aid setting
Find it: Settings Phone Calls Hearing Aid.
/
>
>
>
1
Set this option to Microphone. Microphone
coupling is now optimized.
or
2
Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
or
basics
54
calls
The recent calls list displays up to 20 of the
most recent calls and call alerts.
Find it:
/
>
Recent Calls
recent calls
The Recent Calls list contains information
associated with calls you have made and
received and call alerts you have received.
Tip: You can also access the Recent Calls list
by pressing the navigation key down.
1
2
Scroll through the list.
When you send or receive Private calls, the
Recent Call list contains the following PTT
items with those calls:
Highlight the item you want to view or
perform some action on.
3
To view more details of the item press
r.
•
•
•
•
•
Messages
Pictures
Events
store an item to contacts from
recent calls
Phone calls, Private calls, My Info received
from other phones, or Contacts entries
received from other phones can be stored to
the Contacts list from the Recent Calls list.
My Info
Contacts
calls
55
Find it:
/
>
Recent Calls
voice names
You can place calls by speaking commands to
your phone if you have previously assigned a
voice name to your contacts.
1
Scroll to or select the item you want to
store.
2
Press
-
under Save to store the
information as a new entry in the
Contacts list.
assign voice names to contact
1
2
3
4
Press
- under Contcs and select [New
or
Contact]
.
3
If Save is not one or you options, press
/
Assign a name, phone number and select
[Options]
>
Update Contacts. And select the contact
.
you want to update.
Select Voice Name and follow the prompt to
record the voice name.
4
Press under Done to save your changes.
-
Press
save the entry.
-
under Back and
-
under Done to
redial
To redial your last outgoing phone call, press
and hold or push the PTT button if it was a
private call.
place a call using voice command
From the home screen press and hold the
speaker key until you are prompted to
say the voice name.
The handset will automatically place the call.
`
1
s
calls
56
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
caller ID
Caller ID allows people to identify a
caller before answering the phone by
Find it:
/
>
Call Forward
displaying the number of the incoming call. If
you do not want your number displayed when
you make a call, just follow these easy steps.
1
To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
To block your phone number from being
displayed for a specific outgoing call:
or
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and choosing the following options:
1
2
3
Press * 6 7..
Enter the number you want to call.
Press
`.
If Busy: When your handset is on a call or
transferring data.
To permanently block your number, call your
service provider’s Customer Care.
If No Answer: When you do not answer on
the first 4 rings.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
If Unreachable: When your handset is out of
coverage or powered off.
calls
57
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
phone is locked or the SIM card is not
inserted.
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Note: Emergency calls cannot be placed
while the keypad is locked.
Your phone supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
phone.
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
international calls
If your phone service includes international
dialing, press and hold 0 to insert your local
calls
58
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
temporary prepend will be inserted to the
number you are dialing.
You can additionally enable a predefined prefix
to the dialing number by using Prepend dialing.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
Find it:
/
>
Settings
>
Phone Calls
>
.
Prepend
1
2
Select Prepend and set it to On
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
Select Number and add the prefix number of
your choice.
When the Prepend feature is set to On, the
predefined prefix is inserted to the front of
the number that you are dialing.
2
3
Press
Press
#.
`
.
Except that the number is led by "*", "00",
"011" or the number contains "+".
turbo dial
Note: You can also use Prepend temporarily
when the feature is set to Off. For example,
enter the phone number from the home
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
screen and press
/
>
Add Prepend. The
calls
59
voice mail
Note: To receive voice mail messages, you
must first set up a voice mail account with
your service provider.
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To check voicemail messages press
-
under
Call
.
To dismiss the message notification:
If the flip is closed, press the smart key
the top.
(
on
If the flip is open, press
flip.
r,
Back, or close the
If the caller leaves a message, this icon
3
appears on the display, reminding you that
you have a new message.
calls
60
customize
making a sound; Silent sets your phone to
neither vibrate nor make a sound.
ring tones
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
Tip: Highlighting a ring tone lets you hear
it.
3
Select the features you want to assign the
ring tone to.
Note: Only ring tones stored in your phone’s
memory are available in the ring tones list.
Not all audio files can be assigned as ring
tones.
4
When you are finished, press Done
appears on the display if
you set your phone to Silent. This icon
appears on the display if you set the phone to
.
Note: This icon
,
5
Find it: / > Ring Tones
Vibrate All
.
1
2
Make sure Vibrate All is set to Off.
Scroll through the list of ring tones and
select the one you want to assign. Vibrate
sets your phone to vibrate instead of
set your phone to vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, call alerts, message
customize
61
notifications, pictures sent using Send via PTT,
and Datebook reminders.
1
2
3
Make sure Vibrate All is set to Off.
Select Vibrate from the list of ring tones.
Find it:
/
>
Ring Tones
>
Vibrate All
Select the features you want to set to
make no sound.
1
Set this option to On or Locked
.
Setting this option to On lets you turn Vibrate
All off by pressing the up volume control.
Setting this option to Locked requires you to
press and hold the up volume control to
turn Vibrate All off. The Locked option helps
prevent you from accidentally turning
Vibrate All off.
4
When you are finished, press
-
under
Done
.
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s home
screen or throughout all menu screens.
To set Vibrate All to On or Locked using the volume
controls: Press the volume controls to turn
down the volume as far as possible to set
Vibrate All to On. Continue to hold the down
Find it:
Wallpaper
/
>
Settings
>
Display/Info
>
Wallpaper
>
.
To select a wallpaper image scroll through the
list of pictures and press
picture of your choice.
volume control to set Vibrate All to Locked
.
r
to select the
To set your phone to vibrate instead of making
a sound for some features but not others:
Note: You can set the wallpaper to change
automatically after a certain period of time by
Find it:
/
>
Ring Tones
customize
62
turning on the Auto Cycle feature located in the
Wallpaper menu.
option
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
backlight
Set the amount of time that the display and
java apps. backlights remain on, or turn off the
backlight feature to extend battery life.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Find it:
/
>
Settings
>
Display/Info
>
Backlight
datebook
Find it:
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
/
>
Datebook
>
/
>
Setup
You can view or change these options:
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format.
option
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
customize
63
permission. GPS-enhanced 911 is not
available in all areas.
hide or show
location information
Your phone is equipped with a Location
feature for use in connection with location-
based services that may be available in the
future.
set your privacy options
Find it:
/
>
GPS
>
Privacy
Select Restricted
,
Unrestricted, or Ask Access
.
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except for
your local emergency response center.
Note: Turning Location on will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
customize
64
other features
advanced calling
feature
feature
flip
activation
To make your handset to
answer and end calls by
opening and closing the flip
call waiting
Find it: To accept the
second call and put
press
/
>
u
>
the active call on hold press
Phone Calls
Select Flip To Ans
to End On
>
Flip Activation
.
-
under Yes.
>
On and Flip
To accept the second call
and end the active call press
>
.
any key
answer
To answer phone calls by
pressing any key on the
`
.
Your phone rings with the
second call for you to
answer.
keypad press
/
>
u
>
On
Phone Calls
>
Any Key Ans
>
.
other features - advanced calling
65
contacts
datebook
feature
feature
edit/delete
Press
-
under Contacts
.
create
datebook
events
To create a new Datebook
event press
[New Event].
contact entry Select a contact and press
/
>
D
>
/
>
Edit. Change the
desired content and press
see datebook To see a calendar event
event
-
under Done
.
press
/
>
D
> press the
set ringer ID
Press
-
under Contacts
.
navigation key left or right to
see the day and up or down
to see the events.
Select a contact and press
Ringer. Select
desired ringer, press
under Back, and under
Done
/
>
Edit
>
-
event
reminder
When an event reminder
-
occurs press
Press under Back to close
the reminder.
-
under View.
.
-
other features - contacts
66
feature
GPS
To improve GPS performance:
receive
datebook
events via
PTT
To view the information
while still in the Private call
•
•
Stay in the open,
press
r.
Move away from other electrical or
electronic devices
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent
calls list.
•
Remain stationary.
feature
view
To see your approximate
approximate location press
/
>
GPS
>
-
location
Position. Scroll to view the
entire screen.
To recalculate position press
Rfrsh. This may take several
minutes.
other features - GPS
67
feature
handsfree
set GPS
privacy
options
To set the level of privacy for
your GPS system press
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products
/
>
GPS
>
Privacy.
If your GPS PIN security
feature is enabled, enter your
GPS PIN and select the
privacy option you want.
change GPS Note: Your default GPS PIN is
PIN
0000.
feature
To change your GPS PIN press
speaker-
phone
To activate the
/
>
Settings
>
Security
>
Change
speakerphone while
driving press and hold
the speakerphone key
Passwds GPS PIN
>
.
s
.
Enter the current GPS PIN and
enter the new 4- to 8-digit
GPS PIN. Re-enter the new
4- to 8-digit GPS PIN to
confirm.
auto answer
To automatically answer
calls when connected to a
car kit or headset press
/
>
Settings
>
Phone Calls
>
Auto Ans. Select the amount
of rings before answering.
other features - handsfree
68
personalize
pc applications
feature
feature
language
To set the language of your
other PC
applications applications visit
For a list of complete PC
menu press
/
>
Settings
>
Display/Info
>
Language
.
backlighttime To select how long the
length
display screen and keypad
are backlit press
TTY
/
>
Settings
>
Display/Info
>
Backlight.
feature
menu style
To show the Main Menu as
graphic icons or a text-based
turn On TTY From the home screen
feature
press
Phone Calls
/
>
Settings
>
list press
Display/Info
/
>
Settings
>
>
TTY Use TTY
>
>
On.
>
Menu View
.
choose TTY From the home screen
mode press
clock display To display the clock on your
home screen press
/
>
Settings
>
/
>
Phone Calls
>
TTY Type.
>
Settings
Display
>
>
Display/Info
On
>
Clock
>
Select from TTY VCO or HCO.
,
.
other features - personalize
69
feature
feature
change the From the home screen
keypad lock To lock the keypad press
TTY baud
rate
press
/
>
Settings
>
/
>
Settings
Keypad Lock
Auto Lock
>
Security
Lock Now or
>
Phone Calls
>
TTY Baud
>
.
>
.
Select 45.45 or 50.00
.
Shortcut: To lock the
keypad press
enable SIM To enable SIM PIN, press
PIN
change TTY While in the TTY call, press
/
>
*.
mode
/
>
In Call Setup
>
TTY
>
Type.
during a call
Select from TTY
,
VCO or HCO
.
/
>
Settings
>
Security
>
SIM PIN On
>
.
security
feature
change SIM To change the SIM PIN,
PIN press
/
>
Settings
>
>
Security
.
>
Change Passwds SIM PIN
phone lock
To lock the phone press
/
Lock
>
>
Settings
Lock Now or Auto Lock
>
Security
>
Phone
.
Note: You can make emergency calls on a
other features - security
70
Legal and Safety
•
•
•
•
•
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
Safety and General Information
This section contains important information on the safe and
efficient operation of your mobile device. Read this
information before using your integrated multi-service
portable radio.*
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
Exposure to Radio Frequency (RF) Energy
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the power
level at which your phone transmits.
Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
Your mobile device is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
•
•
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
Portable Radio Product Operation and EME
Exposure
ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) “Regulation of the limitation of exposure to
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
*
The information provided in this document supersedes the general
safety information in user’s guides published prior to May 1, 2006
Legal and Safety
71
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz.”
“Attachment to Resolution 303 from July 2, 2002."
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips
.
Operational Precautions
For optimal mobile device performance, and to be sure that human
exposure to RF energy does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions.
If you wear the mobile device on your body,
always place the mobile device in a Motorola approved clip,
holder, holster, case or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola and are not using the
mobile device in the intended use positions along side the head in
the phone mode or in front of the face in the two-way radio mode,
or if you hang your device from a lanyard around your neck, keep
the device at least 2.5 centimeters (1 inch) from your body when
transmitting.
Phone Operation
When placing or receiving a phone call, hold your mobile phone as
you would a landline telephone. Speak directly into the
microphone
.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
Two-way radio operation
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your mobile device may cause interference with
other devices.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
Legal and Safety
72
your mobile device with your implantable medical device, consult
your health care provider.
Follow Instructions to Avoid Interference
Problems
Turn OFF your mobile device in any location where posted notices
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to
do so by airline staff. If your mobile device offers an airplane mode
or similar feature, consult airline staff about using it in flight.
Other Medical Devices and Health Care Facilities
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this mobile
device.
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Persons with implantable medical devices should observe the
following precautions:
Bluetooth
•
ALWAYS keep the mobile device more than 20
centimeters (8 inches) from the implantable medical
device when the phone is turned ON.
This device supports Bluetooth 1.2 including HSP, HFP, OPP, DUN,
PBAP, and BPP. In order for Bluetooth devices to communicate with
one another, they must utilize the same Bluetooth profile. To
determine the profiles supported by other Motorola devices, visit
respective manufacturer.
•
•
DO NOT carry the mobile device in the breast pocket;
Use the ear opposite the implantable medical device to
minimize the potential for interference.
•
Turn OFF the mobile device immediately if you have any
reason to suspect that interference is taking place.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Legal and Safety
73
Caring for the Environment by
Recycling
Driving Precautions
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
This symbol on a Motorola product means the
product should not be disposed of with household
waste.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Disposal of your Mobile Device and Accessories
Responsible driving practices can be found in the “Smart Practices
Please do not dispose of mobile devices or electrical accessories
(such as chargers, headsets, or batteries) with your household
waste. These items should be disposed of in accordance with the
national collection and recycling schemes operated by your local or
regional authority. Alternatively, you may return unwanted mobile
devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved
national recycling schemes, and further information on Motorola
recycling activities can be found at: www.motorola.com/recycling
Operational Warnings
Obey all posted signs when using Mobile devices in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
Disposal of your Mobile Device Packaging and
User’s Guide
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Product packaging and user’s guides should only be disposed of in
accordance with national collection and recycling requirements.
Please contact your regional authorities for more details.
Legal and Safety
74
Symbol Key
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Symbol
Definition
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Symbol
Definition
032374o
Important safety information
follows.
Batteries and Chargers
Do not dispose of your battery
or phone in a fire.
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Your battery or phone may
require recycling in
032375o
accordance with local laws.
Contact your local regulatory
authorities for more
Keep Your Mobile Device and Its Accessories
Away from Small Children
These products are not toys and may be hazardous to small
children. For example:
information.
Do not throw your battery or
phone in the trash.
•
•
A choking hazard may exist for small, detachable parts.
Improper use could result in loud sounds, possibly causing
hearing injury.
Your phone contains an
internal lithium ion battery.
Li Ion BATT
032378o
•
Improperly handled batteries could overheat and cause a
burn.
Do not let your battery,
charger, or phone get wet.
Glass Parts
Some parts of your mobile device may be made of glass. This glass
could break if the product is dropped on a hard surface or receives
Legal and Safety
75
a substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your mobile device until the glass is replaced
by a qualified service center.
•
•
•
Limit the amount of time you use headsets or headphones
at high volume.
Avoid turning up the volume to block out noisy
surroundings.
Seizures/Blackouts
Turn the volume down if you can’t hear people speaking
near you.
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
If you experience hearing discomfort, including the sensation of
pressure or fullness in your ears, ringing in your ears, or muffled
speech, you should stop listening to the device through your
headset or headphones and have your hearing checked.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your mobile device.
For more information about hearing, see our Web site at
www.motorola.com/hearingsafety (in English only).
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Caution About High Volume Usage
Warning: Warning: Exposure to loud noise from any
source for extended periods of time may affect your
hearing. The louder the volume sound level, the
Service and Repairs
If you have questions or need assistance, we’re here to help.
a number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
less time is required before your hearing could be
affected. To protect your hearing:
Legal and Safety
76
States), 1 (877) 483-2840 (TTY, TDD United States for hearing
impaired).
•
•
•
•
Remove the battery and inspect it to confirm it bears a
Motorola “Original Equipment” hologram;
If there is no hologram, the battery is not a qualified
battery;
Export Law Assurances
If there is a hologram, replace the battery and retry
charging it;
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
If the message remains, contact a Motorola Authorized
Service Center.
•
•
When storing your battery, keep it in a cool, dry place.
It is normal over time for battery life to decrease, and for
the battery to exhibit shorter runtime between charges or
require more frequent or longer charging times.
Battery Use and Safety
•
Motorola recommends you always use
Motorola-branded batteries and chargers. The
warranty does not cover damage caused by non-Motorola
batteries and/or chargers.
Important: Handle and store batteries properly to avoid
injury or damage. Most battery issues arise from improper
handling of batteries, and particularly from the continued use of
damaged batteries.
Caution: Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
Improper battery use, or use of a damaged battery, may
result in a fire, explosion, or other hazard.
DON’Ts
•
Don’t disassemble, crush, puncture, shred, or
otherwise attempt to change the form of your
battery.
•
•
Battery usage by children should be supervised.
•
Don’t let the phone or battery come in contact with
water. Water can get into the phone’s circuits, leading to
corrosion. If the phone and/or battery get wet, have them
checked by your carrier or contact Motorola, even if they
appear to be working properly.
Important: Motorola mobile devices are designed to work
best with qualified batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the
following steps:
Legal and Safety
77
•
•
Don’t allow the battery to touch metal objects. If
metal objects, such as jewelry, stay in prolonged contact
with the battery contact points, the battery could become
very hot.
Motorola recommends you always use Motorola-branded
batteries and chargers. Motorola mobile devices are designed
to work with Motorola batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the following
steps:
Don’t place your battery near a heat source.
Excessive heat can damage the phone or the battery. High
temperatures can cause the battery to swell, leak, or
malfunction. Therefore:
•
•
•
•
Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
If there is no hologram, the battery is not a Motorola
battery;
•
•
Do not dry a wet or damp battery with an appliance or
heat source, such as a hair dryer or microwave oven.
If there is a hologram, replace the battery and retry
charging it;
Avoid leaving your phone in your car in high temperatures.
DOs
If the message remains, contact a Motorola authorized
service center.
•
Do avoid dropping the battery or phone. Dropping
these items, especially on a hard surface, can potentially
cause damage.
Important: Motorola’s warranty does not cover damage to the
phone caused by non-Motorola batteries and/or chargers.
•
Do contact your service provider or Motorola if your
phone or battery has been damaged from dropping
or high temperatures.
Warning: Use of a non-Motorola battery or charger may present a
risk of fire, explosion, leakage, or other hazard.
Proper and safe battery disposal and recycling: Proper
battery disposal is not only important for safety, it benefits the
environment. Consumers may recycle their used batteries in many
retail or service provider locations. Additional information on
proper disposal and recycling may be found on the Web:
Important: Use Motorola Original products for quality
assurance and safeguards. To aid consumers in identifying
authentic Motorola batteries from non-original or counterfeit
batteries (that may not have adequate safety protection), Motorola
provides holograms on its batteries. Consumers should confirm
that any battery they purchase has a “Motorola Original”
hologram.
•
•
www.rbrc.org/call2recycle/ (in English only)
Legal and Safety
78
Disposal: Promptly dispose of used batteries in accordance with
local regulations. Contact your local recycling center or national
recycling organizations for more information on how to dispose of
batteries.
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed for the
safety of all persons, regardless of age or health, and to account
for any variations in measurements.
Warning: Never dispose of batteries in a fire because they may
explode.
Battery Charging
Notes for charging your phone’s battery:
The exposure standard for mobile devices employs a unit of
measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC and by the Canadian regulatory
authorities is 1.6 watts per kilogram (W/kg), averaged over one
gram of tissue. Tests for SAR are conducted using procedures
accepted by the FCC and by Industry Canada with the mobile
device transmitting at its highest certified power level in all tested
frequencies. Although the SAR is determined at the highest
certified power level, the actual SAR level of the mobile device
while operating can be below the maximum value. This is because
the mobile device is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station, the lower
the power output.
•
When charging your battery, keep it near room
temperature. Never expose batteries to temperatures
below 0°C (32°F) or above 45°C (113°F) when charging.
•
•
New batteries are not fully charged.
New batteries or batteries stored for a long time may take
more time to charge.
•
Motorola batteries and charging systems have circuitry
that protects the battery from damage from overcharging.
Specific Absorption Rate
Your model wireless phone meets the governmental
requirements for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured to not exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Before a mobile device is available for sale to the public in the U.S.
and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each
government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
Legal and Safety
79
submitted to the FCC and available for review by Industry Canada.
The highest SAR value for this mobile device when tested for use
at the ear is 0.72 W/kg, and when worn on the body, as described
in this guide, is 1.03 W/kg. Body-worn measurements can differ,
depending upon available accessories and regulatory
requirements. The SAR information includes the Motorola testing
protocol, assessment procedure, and measurement uncertainty
range for this product.
The AGPS feature has limitations, so always tell the emergency
response center your best knowledge of your location. Remain on
the phone for as long as the emergency response center instructs
you.
AGPS might not work for emergency calls, if your local
emergency response center does not process AGPS location
information. For details, contact your local authorities.
If your mobile device cannot find strong AGPS satellite signals, the
location of the nearest cell tower in contact with your mobile
device is automatically provided to the emergency response
center.
While there may be differences between the SAR levels of various
mobile devices and at various positions, they meet the
governmental requirements for safe exposure. Please note that
improvements to this product model could cause differences in the
SAR value for later products; in all cases, products are designed to
be within the guidelines.
AGPS Performance Tips
•
Go outside and away from underground locations, covered
vehicles, structures with metal or concrete roofs, tall
buildings, and foliage. Indoor performance might improve
if you move closer to windows, but some window sun
shielding films can block satellite signals.
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site:
or the Canadian Wireless Telecommunications Association (CWTA)
Web site:
•
Move away from radios, entertainment equipment, and
other electronic devices that might interfere with or block
AGPS satellite signals.
AGPS uses satellites controlled by the U.S. government and
subject to changes implemented in accordance with the
Department of Defense AGPS user policy and the Federal Radio
Navigation Plan. These changes might affect AGPS performance.
AGPS and Emergency Calls
When you make an emergency call, your mobile device can use
Assisted Global Positioning System (AGPS) satellite signals to tell
the emergency response center your approximate location.
Legal and Safety
80
Motorola Limited Warranty for the
United States and Canada
Products Covered
Length of Coverage
Accessories as
defined above.
Ninety (90) days from the date of
purchase by the first consumer
purchaser of the product.
What Does this Warranty Cover?
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
Subject to the exclusions contained below, Motorola, Inc. warrants
its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and Motorola software
contained on CD-Roms or other tangible media and sold for use
with these Products ("Software") to be free from defects in
materials and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a
Products or
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
Accessories that are
Repaired or
Replaced.
Software as defined
above. Applies only to
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or floppy
disk).
Ninety (90) days from the date
of purchase
.
consumer's exclusive remedy, and applies as follows to
new Products, Accessories and Software purchased by
consumers in the United States or Canada, which are
accompanied by this written warranty:
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Products Covered
Length of Coverage
Ornamental Decorations. Ornamental decorations such as
emblems, graphics, rhinestones, jewels, gemstones and their
settings, and other decorative elements, are excluded from
coverage.
Products as defined
above.
Ninety (90) days from the date of
purchase by the first consumer
purchaser of the product.
Legal and Safety
81
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.
non-Motorola housings, antennas, or parts, are excluded from
coverage.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or neglect,
such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not the
fault of Motorola, are excluded from coverage.
Software Embodied in Physical Media. No warranty is made
that the software will meet your requirements or will work in
combination with any hardware or software applications provided
by third parties, that the operation of the software products will be
uninterrupted or error free, or that all defects in the software
products will be corrected.
Use of Non-Motorola Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or
certified Products, Accessories, Software or other peripheral
equipment are excluded from coverage.
Software NOT Embodied in Physical Media. Software that is
not embodied in physical media (e.g. software that is downloaded
from the internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to the first
consumer purchaser, and is not transferable.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, including without limitation, software
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from
coverage.
What will Motorola Do? Motorola, at its option, will at no
charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to
your Product, Accessory or Software, including but not limited to
personal contacts, games and ringer tones, will be reinstalled. To
avoid losing such data, software and applications please create a
back up prior to requesting service.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or
Legal and Safety
82
How to Obtain Warranty Service or Other Information? To
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Or visit us online at http://www.motorola.com/support
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or from one jurisdiction to another.
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute
copies of the Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the Products
associated with such Motorola software. No other use, including
without limitation disassembly of such Motorola software or
exercise of the exclusive rights reserved for Motorola, is
permitted.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
Legal and Safety
83
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
damages arising from any claim of patent infringement or alleged
infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
•
That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
•
That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
•
Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
Hearing Aid Compatibility With Mobile
Phones
Some Motorola phones are measured for compatibility with
hearing aids. If the box for your particular model has “Rated for
Hearing Aids” printed on it, the following explanation applies.
When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also
vary in the amount of interference they generate.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
Legal and Safety
84
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not all
phones have been rated. Phones that are rated have the rating on
their box or a label on the box.
Information From the World Health
Organization
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
The ratings are not guarantees. Results will vary depending on the
user’s hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf
.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
Product Registration
Online Product Registration:
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Product registration is an important step toward enjoying your new
Motorola product. Registering permits us to contact you for
product or software updates and allows you to subscribe to
updates on new products or special promotions. Registration is not
required for warranty coverage.
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
Legal and Safety
85
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your phone
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
Software Copyright Notice
Motorola products may include copyrighted Motorola and third
party software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive
rights for copyrighted software, such as the exclusive rights to
distribute or reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola products may not
be modified, reverse-engineered, distributed, or reproduced in any
Perchlorate Material - special handling may apply. See
.
There is no special handling required by consumers.
Legal and Safety
86
manner to the extent allowed by law. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
•
Understanding AGPS—To provide location information
for emergency calls, certain Motorola mobile devices
incorporate Assisted Global Positioning System (AGPS)
technology. AGPS technology also can be used in
non-emergency applications to track and monitor a user’s
location—for example, to provide driving directions. Users
who prefer not to permit such tracking and monitoring
should avoid using such applications.
If you have further questions regarding how the use of your mobile
device may impact your privacy or data security, please contact
provider.
Privacy and Data Security
Motorola understands that privacy and data security are important
to everyone. Because some features of your mobile device may
affect your privacy or data security, please follow these
recommendations to enhance protection of your information:
Smart Practices While Driving
•
•
•
Monitor access—Keep your mobile device with you and
do not leave it where others may have unmonitored
access. Lock your device’s keypad where this feature is
available.
SM
Drive Safe, Call Smart
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas—for example handsfree use
for more information.
Keep software up to date—If Motorola or a
software/application vendor releases a patch or software
fix for your mobile device that updates the device’s
security, install it as soon as possible.
Erase before recycling—Delete personal information
or data from your mobile device prior to disposing of it or
turning it in for recycling. For instructions on how to delete
all personal information from your device, please contact
your local service provider.
Your mobile device lets you communicate by voice and
data—almost anywhere, anytime, wherever wireless service is
available and safe conditions allow. When driving a car, driving is
your first responsibility. If you choose to use your phone while
driving, remember the following tips:
Legal and Safety
87
•
•
Get to know your Motorola mobile device and its
features such as speed dial and redial. If available,
these features help you to place your call without taking
your attention off the road.
•
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
When available, use a handsfree
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
handsfree accessories available today.
•
•
Use your mobile device to call for help. Dial 911 or
other local emergency number in the case of fire, traffic
accident, or medical emergencies (wherever wireless
phone service is available).
•
Position your mobile device within easy reach. Be
able to access your phone without removing your eyes
from the road. If you receive an incoming call at an
inconvenient time, if possible, let your voice mail answer
it for you.
Use your mobile device to help others in
emergencies. If you see an auto accident, crime in
progress, or other serious emergency where lives are in
danger, call 911 or other local emergency number
(wherever wireless phone service is available), as you
would want others to do for you.
•
•
•
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
•
Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number (wherever
wireless phone service is available).
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
Legal and Safety
88
F
O
frequently asked questions
L
G
P
GPS enabled
M
private calls
memory
message center
H
Q
quick notes
N
I
R
index
90
V
voice mail
ring tones
T
W
S
safety
Y
index
91
www.motorola.com
NNTN7813A
xxxxxxxx xx xx AUG/09
Printed in USA
|