|
TELUS
i410 Mike Phone
User’s Guide
Class B Digital Device
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
As a personal computer peripheral, this device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i410
Model Number: H76XAH6JR7AN
FCC-ID: IHDP56KR1
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
FCC Notice to Users
The following statement applies to all products that have
received FCC approval. Applicable products bear the FCC logo,
and/or an FCC ID in the format FCC-ID: IHDP56KR2 on the product
label.
Motorola has not approved any changes or modifications to this device by
the user. Any changes or modifications could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21.
•
Consult the dealer or an experienced radio/TV technician for
help.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may
not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
See RSS-GEN 7.1.5.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048
www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to
return your phone for repairs, replacement, or warranty service,
please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7966A
HELLOMOTO
Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson.
Ready
10:05pm 10/23
Right Soft Key
Perform function
in lower right
display.
Left Soft Key
Perform function
in lower left
Speaker
display.
On/Off Key
Smart Key
Web Key
OK Key
Menu Key
From home screen,
open main menu.
Volume Keys
PTT Button
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
Talk Key
Make &
answer calls.
Micro USB
4-Way Navigation
Key
Audio Jack
Connector
Connects charger
and accessories.
1
check it out
Ready
10:05pm 10/23
Ready
10:05pm 10/23
2
Press the Navigation Key
up, down, left or right
to highlight a menu feature.
Customizable r key
3
4
that can be used
to open the
Settings screen
Press the r key
to select.
Press and hold the
1
@
Power Key
for a
few seconds, or until
the screen lights up,
to turn on your phone.
2
Patent and
Information . . . . . . . . . 92
Motorola Limited
and Canada . . . . . . . . 86
Hearing Aid
Mobile Phones . . . . . 90
Information From
RF Energy
Compatibility. . . . . . . . 78
Caring for the
Organization . . . . . . . 91
Recycling . . . . . . . . . . 79
contents
4
menu map
main menu
0
VoiceRecord
N
PT Manager
p
L
Call Alert
•
[New VoiceRec]
•
•
•
•
•
•
Send Message
Java Apps
B
j
K
Recent Calls
Send Picture
Send Event
Send My Info
Send Contact
Configure
•
Java System
Media Center
u
Settings
Shortcuts
•
(see next page)
•
•
•
•
•
•
•
•
•
•
[New Entry]
t
Ring To nes
E
Messages
1)Shortcuts
•
•
•
•
Vibrate All: On/Off
•
[Create Mesg]
2)Cntcs[New Contact]
3)Recent Calls
4)Contacts
Ringer
Vibrate
Silent
•
•
[Create Txt Msg]
[Create MMS Msg]
•
•
•
•
•
Voice Mail
Inbox
5)Datebook
6)Messages
c
GPS
Drafts
7)VoiceRecord
8)Browser
•
•
•
Position
Privacy
Interface
Outbox
Net Alert
9)Call Forward
Q
P
c
Shop
A
Contacts
P
Call Forward
Datebook
Memo
•
[New Contact]
Talk Around
Bluetooth
D
l
1
J
o
Profiles
M
Call Timers
•
•
•
•
•
Hands Free
Browser
Link to Devices
Device History
Setup
•
•
•
•
•
•
•
•
Last Call
Phone Reset
Phone Lifetime
Prvt/Grp Reset
Prvt/Grp Life
Circuit Reset
Circuit Lifetime
Kbytes Reset
My Info
•
•
•
•
•
•
•
•
My Name
Find Me
Line 1
Line 2
This is the standard Main Menu layout.
Your phone’s menu may be a little
different.
Private ID
Group ID
Carrier IP
IP1 Address
IP2 Address
menu map
5
settings menu
Display/Info
2-Way Radio
Security
•
•
•
•
•
•
•
•
•
Wallpaper
Text Size
Theme
•
•
•
•
•
•
•
Tkgrp Silent
•
•
•
•
•
Phone Lock
Tkgrp Area
Keypad Lock
SIM PIN
One Touch PTT
Alert Type
Home Icons
Backlight
Clock
GPS PIN
PTT Quick Notes
On/Off PTT
Store Rcvd Info
Change Passwds
Advanced
Menu View
Large Dialing
Language
•
•
•
•
•
•
•
•
Alert Timeout
Personalize
Headset/Spkr
Connectivity
Reset Defaults
Return to Home
Transmitters
Phone Only
•
•
•
•
•
•
•
•
•
Menu Options
Phone Calls
Up Key
•
•
•
•
•
•
•
•
•
•
•
•
•
Set Line
Down Key
Left Key
Right Key
Center Key
Left Sftkey
Right Sftkey
Power Up
Any Key Ans
Auto Redial
Call Waiting
Auto Ans
Baud Rate
Flip Activation
Minute Beep
Call Duration
TTY
Hearing Aid
Notifications
DTMF Dialing
Prepend
Volume
•
•
•
•
•
•
•
•
•
Line 1
Line 2
Messages
Earpiece
Speaker
Keypad
Java Earpiece
Java Spkr
Data
menu map
6
use and care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to water, rain,
extreme humidity, sweat, or other
moisture. If it does get wet, don’t try to
accelerate drying with the use of an
oven or dryer, as this may damage the
phone.
Don’t expose your phone to dust, dirt,
sand, food, or other inappropriate
materials.
extreme heat or cold
cleaning solutions
To clean your phone, use only a dry soft
cloth. Don’t use alcohol or other
cleaning solutions.
Avoid temperatures below 0°C/32°F or
above 45°C/113°F
.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
7
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray edged pages
at the back of this guide.
3
Press
r
to select it.
symbols
This means a feature is network/
subscription dependent and may
not be available in all areas. Contact
your service provider for more
information.
about this guide
This guide shows how to locate a menu
feature as follows:
This means a feature requires an
optional accessory.
Find it:
/
>
Settings
This means that, from the home screen:
1
2
Press the menu button
/
to open the
Main Menu
.
Press the navigation key to scroll to
Settings
.
essentials
8
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
SIM card
insert the SIM card
Turn off your phone and remove your battery
before you install or remove a SIM card.
battery
Carefully slide the SIM card into your phone,
until it lies flat in the SIM card holder.
battery installation
1
Open the micro-USB and headphone
jack connector covers. Slide the battery
door down until it is released.
essentials
9
2
3
Remove battery door.
4
Replace the battery door.
Insert battery as shown below. Push the
battery down until it snaps in place.
5
Close the micro-USB and headphone
jack connector covers.
essentials
10
segment of the indicator must be visible to
ensure full phone functionality while charging.
battery charging
New batteries are not fully charged.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s micro-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or
bus-powered USB hub). Typically, USB
high-power connectors are located directly on
your computer.
charge using the charger
1
Pull out the connector cover, and insert
the charger into the accessory connector
on your phone as shown.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
the USB cable is connected between the
computer and the phone, the phone will
2
Plug the other end of the charger into the
appropriate electrical outlet.
When you charge the battery, the battery level
indicator at the upper right of the screen
shows charging progress. At least one
essentials
11
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
charger from the wall will prevent the battery
from overcharging.
Note: If the battery is very low, the phone will
not turn On, but it will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
battery indicators
d
e
f
g
The battery is at approximately 100%
to 90% capacity when the indicator is
blue and displaying three bars.
The battery is at approximately 65%
capacity when the indicator is green
and displaying two bars.
The battery is at approximately 10%
capacity when the indicator is yellow
and displaying one bar.
The battery is at approximately 5%
capacity when the indicator is red
and has a flashing red bar.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
maintained approximately between 80% and
95% of the battery's capacity. Cables and
software drivers are available in Motorola
h
The battery is charging.
TM
Original data kits, sold separately.
Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging. Of course, unplugging the
essentials
12
2
3
You are prompted to enable security.
Press under Yes. A series of screens
followed by the default home page
displays.
turn it on & off
To turn on your
-
phone, press and
hold
@
for a few
Press
@
to return to the home screen.
seconds or until the
display turns on.
make a phone call
To turn off your phone, press and hold
two seconds.
@
for
Enter a phone number and press
`
to make
a call or use a voice name. See “voice
Note: If you press
@
for more than four
seconds, the handset will power “On” on
Note: For best call quality avoid covering the
antenna with your hand.
To hang up press
@.
enable security
You must enable security the first time you
power on you phone or within 10 days of first
activation.
answer a phone call
When your phone rings and/or vibrates, you
have the following options to answer:
1
Press
-
under Ok.
essentials
13
1
2
If you want to answer the call on the
handsfree speaker phone, press the
To make a private call
1
Enter the Private ID you want to call.
speaker key
s
with the flip closed. To
2
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
hang up press the smart key
(
.
If you want to answer the call using the
handset, just open the flip and press
To hang up press or close the flip.
`
.
3
Release the PTT button to listen.
@
To end the call press
@.
Note: You must have the Flip Activation feature
Note: A Private call ends automatically if there
is no activity on the call for a few seconds.
Tip: To let someone know you want to talk to
make a private call
them on a Private call, press
-
under Alert.
With Private calls service, you use your phone
as a long-range, digital 2-way radio using one-
to-one Private calls or one-to-many group
calls.
answer a private call
1
When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
Your Private ID is the number at which you
receive one-to-one Private calls.
Talkgroup numbers are numbers through
which you receive one-to-many group calls.
essentials
14
2
3
Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
SDG
,
IP or Other). To store a Private ID,
choose Private
.
5
Enter the number for the entry and press
- under Done to save the entry.
Release the PTT button to listen.
To end the call press
-
under Exit
.
Tip: Before saving the entry, you can save
more information. You can store E-mail
addresses, IP addresses, or Talkgroup IDs.
You can assign each number a speed dial
number and voice name. You can also create
Contact entries that are groups of Private IDs
called Group IDs and/or SDG lists.
store a phone number
or private ID
You can store a phone number or Private ID in
Contacts
:
After you have saved the number, the new
Contacts entry is displayed.
1
2
Press
/
>
Contacts [New Contact].
>
Enter a name for the new entry Each
.
entry’s name can contain up to 20
characters.
call a stored phone
number or private ID
3
Select Ringer if you wish to assign a
specific ring tone to that phone number.
Shortcut: From the home screen press
-
under Contcs
4
Select a type for the entry (Mobile
,
Private
,
Work1
,
Work2
,
Home
,
Email
,
Fax,
Pager
,
Talkgroup,
or
essentials
15
Find it:
/
>
Contacts
Private call to that Private ID by pressing and
holding the PTT button, even if the Private ID
is not the type of number displayed.
1
Scroll to the Contacts entry.
Tip: By pressing the first letter of the
name of the Contacts you want, you will be
taken to all the contact names starting
with the letter you pressed.
your phone number and
Private ID
2
3
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile Private, Work1, Work2, Home,
etc.).
Find it:
Tip: Want to see your phone number or
Private ID while you’re on a call? Press
/
>
My Info
/
>
,
My Info
.
If you choose a phone number, press
to call the entry.
`
text messages
or
If your service provider offers text messaging,
your phone sends text messages using
Mobile Originated Short Messaging Services
(MOSMS) and receives text messages from
other phones that are using MOSMS.
If you choose a Private ID, Talkgroup ID, or
SDG List, press and hold the PTT button
to call the number.
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
essentials
16
Note: The messaging menus may look
slightly different, depending on the
messaging setup of your phone.
option
Srvc Cntr No: Enter the phone number of your
service center. If you do not know this
number, contact your service provider.
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
Expire After: This is the amount of time
messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
Shortcut: From the home screen press
-
Scroll to select the number of days you
want your messages to be saved.
under Mesg
>
/
>
Text Msg Setup.
or
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted. See “cleanup” on page 44.
Find it:
/
>
Messages
>
/
>
Text Msg Setup
The following options become available:
Quick Notes: Quick notes are short, pre-written
text messages that you can create, edit,
and send in your text messages. You can
store up to 20 quick notes. A quick note
may be up to 30 characters long.
option
Signature: Enter your signature (up to 11
characters long).
Delivery Rpt: Set this option to On if you want
your phone to show you when the
message has been delivered.
You can create a [New Note] or press
-
under
Edit to change the pre-written quick notes.
essentials
17
Press
you entered.
-
under Done to save the information
2
3
Select the message you want to read or
press the number of the message you
want to read. If the message fills more
than one screen, scroll to read it.
receive a text message
Tip: Scrolling through one message lets
you view the next message.
1
To view the message press
To dismiss the message notification press
under Exit
-
under Read.
2
To reply to the message, press
-
under
-
.
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
Note: If your phone is powered off when you
receive a text message, your phone notifies
you the next time you power it on. If you are
out of your coverage area, your phone alerts
you when you return to your coverage area.
number in Contacts, press
/.
create and send text messages
Tip: While reading a text and numeric
message that contains a phone number, you
1
From the home screen press
-
under
Mesg
>
[Create Mesg] [Create Txt Msg].
>
can press
`
to call that number.
or
read from the message center
Select Inbox
>
Text Inbox, or Outbox Text Outbox,
>
or Drafts Text Draft
>
.
1
From the home screen press
-
under
Mesg
>
Inbox
>
Text Inbox.
2
To address the message use the keypad
to enter the phone number of the person
essentials
18
you want to send the message to and
use drafts
When you save a message as a draft, it is
saved in the drafts folder.
press
r.
or
Press
-
under Browse, and select Recent
Shortcut: From the home screen press
under Mesg
-
Calls Contacts or Memo to find the number you
,
>
Drafts
>
Text Draft.
want.
1
Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
3
Select Msg and enter the text of the
message or to use a quick note press
under Browse and scroll to the quick note
you want.
-
2
To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
4
Press
/
,
>
Set Send Method and select Text
,
Fax,
x400
Paging Email ERMES, or Voice
,
,
.
resend text messages
Shortcut: From the home screen press
5
If you want to send the message, press
under Send or to delete the message
without sending it, press under Cancel
-
-
-
.
under Mesg
>
Outbox
>
Text Outbox.
Note: If you want to request confirmation
of delivery press
1
2
Scroll to the message you want to resend
or press the number of the message you
want to resend.
/
>
Delivery Report
>
On.
Press
-
under Resend.
essentials
19
delete sent text messages
manage memory
Shortcut: From the home screen press
-
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
under Mesg
>
Outbox
>
Text Outbox.
1
2
3
Scroll to the message you want to delete.
The text inbox holds 20 messages. If the text
inbox is full, you cannot receive messages
until you delete some.
Press
Press
-
-
under Delete
.
under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press
The outbox and drafts folder share memory
space. Together they can hold 30 messages.
If the outbox and drafts folder memory is full,
you cannot send messages or save drafts
until you delete some.
-
under Mesg
>
Outbox
>
Text Outbox.
1
2
Press
Press
/
>
Delete All.
-
under Yes to confirm.
To view the amount of memory available in
your text inbox:
go to a website
If a message contains one or more website
URLs, you can go to that website. See “go to
Shortcut: From the home screen press
-
under Mesg Text Msg Setup Mem Mtr-Inbox.
>
/
>
>
To view the amount of memory available in
your outbox and drafts folder:
essentials
20
Shortcut: From the home screen press
-
under Mesg Text Msg Setup Mem Mtr-Other.
>
/
>
>
using your handset
as a modem
Your phone can be connected to a computer
via USB for use as a modem. For more
specific information on how to setup your
phone for use with your computer please visit
www.motorola.com/support and look under the FAQ
section.
essentials
21
main attractions
Items in the media center can be sent in
MMS messages. See “MMS” on page 31.
media center
The media center lets you access pictures and
audio recordings stored in your phone’s
memory.
Pictures in the media center can be sent in
Private calls using Send via PTT.
Audio files supported by the Media Center
include:
The following audio recordings can be
accessed through the media center:
Format
.au
Sampling Rates/Bit Rates
8 KHz/8 kbps
•
•
Voice records
Musical ring tones in the list of ring
tones
8 KHz, Type 0
.midi
.mp3
.wav
8 KHz/192 kbps
8 KHz/64 kbps
•
•
Audio recordings saved from MMS
messages received
Audio recordings downloaded to your
phone
Note: Stereo audio files are not supported by
the Media Center.
main attractions
22
Image files supported by the Media Center
include:
•
•
•
Datebook events
My Info
Format
.png
Max. Image Size (in pixels)
640 x 480
Contact information
You can choose to send My Info and contact
information to any Private ID.
640 x 480
.gif
640 x 480
.jpg
You can choose to send pictures, messages,
events to the Private ID you are engaged in a
a Private call with, Private IDs on the Recent Calls
127 x 127
.wbmp
list, and Private IDs stored in Contacts
.
PTX features
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
With Push To View features, your phone
can send and receive the following
items through Private calls with other phones
that have this capability:
•
•
Short text messages1
Pictures1
1. Additional charges may apply.
main attractions
23
You can turn your phone’s ability to send and
receive messages, pictures, events on and
off.
begin a message during a Private call:
While in a Private call, press
/
>
Use PTT Feature
>
Send Message.
Note: You cannot send PTT feature items
during Talkgroup calls or SDG calls.
begin a message from the Contact or
the Recent Calls list
1
From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
send messages
The Push to Send Messages feature
lets you send short text messages
through Private calls.
2
Press
/
>
Use PTT Feature
>
Send Message.
begin a message from the PT Manager
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with. The message won’t be
stored in the recent calls list.
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
Find it:
/
>
PT Manager
>
Send Message
begin a message and choose a
recipient
You can begin a message during a Private call,
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
from the Contacts list, the Recent Calls list, or from
the PT Manager
.
main attractions
24
create messages
receive messages
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 400
characters long.
When you receive a message, a message
notification appears on the display. To view
the message press
r.
To dismiss the message press
-
under
Dismiss
.
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
reply to a message
1
2
3
View the message.
Press under Reply
-
.
Create the message and press the PTT
button to send it.
send a completed message
After you have completed your message,
press the PTT button to send it.
send pictures
You can send pictures stored in Media
Center through Private calls. The picture you
send appears on the Private call recipient’s
display.
main attractions
25
If the recipient accepts the picture, their
phone saves the picture.
4
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply.
Continue? appears and you are prompted to
respond.
5
When prompted, press the PTT button to
resume the Private call.
start a call by sending a picture
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
from Media Center
Find it:
/
>
Media Center
send a picture during a call
1
2
Select the picture you want to send.
Press
1
While in a Private call, press
Picture or press
Send Picture
-
under
>
/
>
Send Via...
>
Send via PTT
.
/
>
Use PTT Feature
.
A list of contacts that have Private IDs and
are able to receive pictures appears.
A list of pictures that can be included in a
Private call appears.
3
Select the name of the person you want
to send the picture to.
2
3
Select the picture you want to send.
4
Press the PTT button to send the picture.
Press the PTT button to send the picture.
5
When prompted, press the PTT button to
resume the Private call.
main attractions
26
from the PT Manager:
Find it: PT Manager Send Picture
Pictures you receive are saved to your phone’s
memory. They are accessible through Media
/
>
>
Center
.
1
Select A Contact, or A Recent Call to see a list of
entries that can receive pictures.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
2
Select the entry containing the Private ID
you want to send the message to.
Tip: If you want to stop the transmission
3
4
5
Select the picture you want to send.
before it is finished, press
@.
Press the PTT button to send the picture.
Note: The first time you accept a stored
picture after turning the phone on, Picture Fees
May Apply. Continue? appears and you are
Once picture has been sent, when
prompted press the PTT button to resume
the call.
prompted to respond. Press
accept the picture.
-
under Yes to
receive a picture
clear a picture from the display
If you want to clear a picture from your
phone’s display while still on a call, press
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
/
>
Clear Screen.
The picture will not appear on the display
again the next time you receive a call from
main attractions
27
person who sent it. This does not delete the
picture from Media Center
1
2
Select or remove the fields you want to
send.
.
Press
-
under Done.
send My Info
The information your phone sends always
includes My Name and Private. You may also send
Line 1 Line 2, Carrier IP, and Circuit Data depending on
your sending options.
1
While in a Private Call press
Send via PTT, and push the PTT button to
send.
/
>
,
or
automatic sending
To control whether you send your information
automatically:
2
From the home screen press
Send via PTT and push the PTT
button to send.
/
>
My Info
>
/
>
Find it:
/
>
PT Manager
>
Configure
>
PTT My Info
>
Auto Send
set my info sending option
You can control what portion of the
information in My Info is sent and
whether it is sent automatically in every call or
only when you choose to send it.
1
Select On or Off.
When you make a call in which your
information is sent automatically, the name
you entered in the My Name field of My Info
appears on the display of the recipient’s
phone, even if your name and Private ID are
not stored in the recipient’s Contacts.
Find it:
/
>
PT Manager
>
Configure
>
PTT My Info
>
Info to Send
main attractions
28
send contact information
turn PTT features on and off
1
2
3
While in a Private Call press
/
>
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
Use PTT Feature
.
Select Send Contact and select the contact
information you want to send.
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Push the PTT button to send.
or
Find it:
/
>
PT Manager
Select On/Off PTT
Check or uncheck Messages
Events
>
Configure
1
2
From the home screen press
/
>
1
2
.
PT Manager
>
Send Contact.
,
Pictures and/or
Enter the Private ID number of the person
you want to send the Contact information
.
to or press
-
under Browse
.
3
Select from Recent Calls
,
Contacts, or Memo.
4
Select the contact information you want
to send and push the PTT button.
main attractions
29
one touch PTT
option
Send Message: Go to the first screen to send a
message.
Find it:
/
>
PT Manager
>
Configure One Touch PTT
>
One Touch PTT sets your phone to do any of the
following each time you press the PTT button
from the home screen:
Send Picture: Go to the first screen to send
Send Event: Go to the first screen to send a
Datebook event.
option
Off: Nothing happens when you press the
PTT button from the home screen.
Send My Info: Go to the first screen to send My
Info. See “send My Info” on page 28.
Last Call: Call the most recent Private ID or
Send Contact: Go to the first screen to send a
contact. See “send contact information” on
page 29.
Group on the recent calls list.
Assigned No.: Call a Private ID you assign.
Enter the number using your keypad, or
press
Calls, or Memo
-
under Search. Select Contacts, Recent
.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
Note: If you are entering a Talkgroup
number, enter before the number.
#
You can also access the Quick PTT feature and
set the One Touch PTT feature.
main attractions
30
Find it:
/
>
PT Manager
create a message
1
Select Quick PTT to quickly find a contact
that has a Private ID.
Shortcut: From the home screen press
-
under Mesg
>
[Create Mesg]
>
[Creat MMS Msg].
or
or
2
Select Send Message Send Picture, Send Event, Send
My Info, or Send Contact. After choosing what
PTT item you are sending, select a
,
Find it:
[Creat MMS Msg]
/
>
Messages
>
[Create Mesg]
>
1
Select To and add the phone number or
email address or select from Contacts or
contact and press the PTT button to send.
or
Recent Calls and press
-
under Done.
3
Select Configure to configure your PTT Quick
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
Notes
,
PTT My Info
,
One Touch PTT, or On/Off PTT
.
and press
When you are finished addressing the
message, press under Back
To enter or edit the body of the message:
Select Mesg and enter text or press
-
under Remove.
MMS
Multi-Media Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures and audio recordings.
-
.
2
-
under QNotes to select a pre-written quick
note.
main attractions
31
3
When you have finished entering text,
option
press
r.
Valid Until: Set a date after which attempts to
4
Press
-
under Send.
deliver the message end, or press
-
under
No Date
.
more message options
reply to a message
To view more message fields in a message
you are creating, select .....MORE..... or press
-
You can reply to a message while you are
viewing it, or while a previously viewed
message is highlighted in the message
center. You cannot reply to unread messages.
under More
.
option
Subject: Create or edit the subject line.
To reply to a message:
Attach: Attach a picture, audio file or voice
record.
1
2
View the message you want to reply to.
To reply to the sender only, press
under Reply or if you wish to include all the
people copied in the message, press
under Reply All
Cc: Send a copy of this message to
someone else.
-
-
Auto Replies: Allows you to create a list of
possible short answers for the recipient to
choose when replying to your message.
.
A list of short phrases appears. Select any
of these phrases to add it to your
Priority: Set priority Normal or High
.
messages or select [Create Reply]
.
Report: Set receipt confirmation On Delivery
.
main attractions
32
3
Edit any message fields you want to
change.
attach a picture, audio and
voice recording
You can attach one or more pictures, audio or
voice recordings from your phone into the
body of the message. You can include text in
the body of your message in addition to these
items.
4
Press
-
under Send.
quick notes
When you are filling in the Message and Subject
message fields, you can add ready-made
words or short phrases called Quick Notes.
After you add these words or phrases, you
can edit them as you would any other text.
While you are filling in the Attach field, press
[New]
>
Browse Pictures or Browse Audio.
A list of available pictures, audio and voice
recordings appears.
1
While you are creating a message, scroll
to or select Message or Subject
.
Select the picture, audio or voice record you
want to attach.
2
Press under QNotes.
-
Select the Quick Note you want to insert
into the message.
Tip: To view or listen to the item before
attaching it, highlight it and press Preview
.
3
Press
-
under Send.
Note: You can only attach audio files and
pictures if they are not forward locked and if
their DRM settings do not prevent you from
sending.
main attractions
33
Forward locked items are usually copyright
protected, and you cannot share them with
anyone, such as in Private calls or by
uploading them from your phone.
remove an attachment
To remove an attachment in a message you
are creating:
1
2
Select Attach.
create a new voice record
You can create a new voice record to send
with a message:
Scroll to the attachment you want to
remove.
3
Press
/
>
Unattach.
1
2
3
Press
/
or press
-
under Attach
>
[New].
drafts
Select Record Voice
.
While you are creating a message, you can
save it in the MMS drafts folder before you
send it.
Say the message you want to record into
the microphone.
4
When you are finished recording,
press
You can view, edit, send, or delete saved
drafts.
r.
5
When you are finished, press
-
under
Done
.
save a message in the MMS
drafts folder
From the Message center press
The voice record is attached to the message
and saved to the list of voice records.
/
>
Save.
main attractions
34
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
To delete a message in the MMS drafts folder
without sending it, scroll to the message you
want to delete and press
under Yes
-
under Delete and
-
.
send a draft
MMS outbox
MMS messages you have sent or tried to
send are stored in the MMS Outbox.
Shortcut: From the home screen press
under Mesg
-
>
Drafts
>
MMS Drafts
.
1
2
Select the draft you want to send.
Press under Send
-
.
forward items from the outbox
Shortcut: From the home screen press
under Mesg
-
edit a draft
>
Outbox
>
MMS Outbox.
Shortcut: From the home screen press
under Mesg
-
1
Scroll to the message you want to
forward.
>
Drafts
>
MMS Drafts.
Select the draft you want to edit and press
r.
2
3
Press
/
>
Forward.
delete a draft
Edit and send your message.
When you send a draft, it is removed from the
MMS drafts folder.
main attractions
35
resend
delete a message
If a message was not sent from your handset,
you can resend it.
1
Scroll to the message you want to delete.
2
Press
or
- under Delete.
Shortcut: From the home screen press
under Mesg
-
>
Outbox
>
MMS Outbox.
3
Press
/
>
Delete Multiple.
1
2
Scroll to the message you want to resend.
Press Resend
4
Select the message or messages you
want to delete.
.
Note: If your message was sent successfully,
Resend will not appear as an option.
5
Press
-
under Delete to confirm.
receive a message
When you receive an MMS message, a
message notification appears on the display.
check delivery status
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
1
2
To view the message press
r.
If the message fills more than one screen,
use the navigation key to scroll down and
read the remaining text.
Shortcut: From the home screen press
under Mesg
-
>
Outbox
>
MMS Outbox.
1
2
Scroll to the message you want to view.
Press
/
>
Delivery Status.
main attractions
36
message notifications
set notification options
When you receive a message, your phone
notifies you with text on the display, a
notification tone or vibration.
To control whether your phone sounds
message notification tones while you are on a
phone call:
You can access the message or dismiss the
notification.
Find it:
/
>
Settings
>
Phone Calls> Notifications.
Select from the following options:
If you dismiss the notification, the message is
not deleted. It can be accessed through the
message center.
option
Receive All: Tones sound during calls for all
types of messages.
If you are not on a phone call when you
receive a message, your phone sounds a
notification tone every 30 seconds until you
access the message or dismiss the alert.
Msg Mail Only: Tones sound during calls for
mail messages; tones for all other types of
messages are held until you end calls.
Delay All: Tones for all types of messages are
held until you end calls.
If you are on a call when you receive a
message, your phone may sound a
notification tone during the call or after you
end the call, depending on how you set your
notification options.
Note: Delay All is the default setting.
Tip: To set notification options during a call
press
/
>
Call Setup
>
Notifications.
main attractions
37
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
embedded objects and
attachments
Messages may contain pictures or audio
recordings as part of the body of the message
or as attachments.
view received messages from
the message center
If a message contains pictures or audio
recordings in the body of the message,
highlight each picture or audio recording to
view or play it.
Shortcut: From the home screen press
under Mesg
-
>
Inbox
>
MMS Inbox.
use auto replies
If the message you are replying to was sent
with auto replies, it contains a numbered list
of possible replies for you to send. Press the
number of the reply you want to send. The
reply is sent immediately without further
action.
If a message contains a picture or audio
recording as an attachment, open the
attachment to view the picture or play the
audio recording.
open attachments
1
View the message.
delete unread messages
2
Highlight the attachment you want to
1
Scroll to the message you want to delete.
open and press
r. Attachments appear
2
Press under Delete
-
.
at the end of a message.
main attractions
38
3
Press
-
under Yes to confirm.
the From field, the To field, the Cc field, the
subject line, or the body of the message, you
can call or send a call alert to that number.
forward a message
1
Press
/
>
Forward.
send a call alert
2
Create and send your message.
Embedded objects and attachments are
included when you forward a message.
1
View the message.
2
Highlight the Private number or Talkgroup
ID you want to alert.
lock and unlock messages
3
Press
/
>
Alert.
Locked messages cannot be deleted until you
unlock them.
4
Push the PTT button.
make a group call
1
View the message you want to lock or
unlock.
1
2
3
View the message.
Press
2
Press
/
>
Lock Message or
.
/
>
/
.
Unlock Message
Highlight the Talkgroup ID you want to
call.
call a number in a message
If a message you receive contains a phone
number, Private number, or Talkgroup ID in
4
Select Talkgroup
.
5
Push the PTT button.
main attractions
39
type you want to assign the number or
email address.
store message information to
contacts
If a message you receive contains a phone
number, Private number, Talkgroup ID, or an
email address in the From field, the To field,
the Cc field, the subject line, or the body of
the message, you can store this information
to Contacts.
6
Press
-
under Done.
go to a website
If a message contains one or more website
URLs, you can go to that website.
1
2
View the message.
1
2
View the message.
Highlight the website URL you want to go
to.
Highlight the number or email address
you want to save.
3
Press
/
>
Go To Website.
3
Press
To store the number or email address as a
new entry, select [New Contact]
/
>
Save Number or
/
>
Save Email.
Note: The entire URL must appear in the
message to allow you to open the website.
4
.
save an embedded picture or
audio recording
To store the number or email address to
an existing entry, select the entry.
To save a picture or audio recording that is
part of the body of a message you receive:
5
With the Contacts type field highlighted,
scroll left or right to display the Contacts
main attractions
40
1
2
View the message.
save attachments
Highlight the picture or audio recording
you want to save.
1
View the message.
2
Highlight the attachment you want to
save.
3
Press
/
>
Save Picture or
/
>
Save Audio.
The item will save in the default storage
location.
3
Press
/
>
Save Attachment.
Selected items save to the default storage
location.
Note: Some types of pictures and audio
recordings can be viewed or played, but not
saved.
Note: Some types of pictures and audio
recordings can be viewed or played, but not
saved. You may save pictures and audio
recordings from slide shows individually as
you view or listen to them.
delete an embedded picture or
audio recording
To delete a picture or audio recording that is
part of the body of a message you receive:
save a picture
1
View the slide show.
1
2
View the message.
2
When the picture you want to save
Highlight the picture or audio recording
you want to delete.
appears, press
/
>
Save Picture.
3
Press
/
>
Delete Picture or
/
>
Delete Audio.
main attractions
41
This option is available from many context-
sensitive menus when you are using MMS.
save audio
1
2
3
View the slide show.
Press Save Audio.
The MMS Setup menu lets you customize
MMS for your handset with the following
options:
/
>
If the slide show contains more than one
audio recording, a list of the audio
recordings appears. Select the audio
recording you want to save.
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From field on other
iDEN handsets when they receive
messages from you.
message transmission
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
message transmission from being completed.
With the flip closed, press the smart key on
the top
(. Opening or closing the flip does
not interrupt message transmission.
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
customize MMS
Find it:
/
>
Messages
>
/
>
MMS Setup
main attractions
42
new quick notes and reply
phrases
option
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
create quick notes
1
From the MMS Setup menu, select Quick
Notes or Replies
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
.
2
3
Select [New Quicknote] or [New Reply].
Enter text from the keypad.
Downloads: Controls whether your phone
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your phone to download new messages
automatically; set the option to Manual if you
want your phone to prompt you before
downloading new messages.
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
1
2
3
From the MMS Setup menu, select Quick
Notes or Replies
.
Select the Quick Note or reply phrase you
want to edit.
Memory Size: Shows the total amount of Used
Free, and total Capacity of the phone’s
memory.
,
Edit the text.
main attractions
43
delete only Quick Notes and reply
phrases you have created
Find it:
Cleanup
/
>
Messages
>
/
>
MMS Setup
>
1
From the MMS Setup menu, select Quick Notes
or Replies
1
2
Select Inbox or Outbox.
.
Choose a cleanup option from the
following list:
2
Scroll to the Quick Note or reply phrase
you want to delete.
option
3
Press
Press
-
-
under Delete
.
Off: Messages are never automatically
deleted.
4
under Yes to confirm.
5 Messages: If you have more than 5
cleanup
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
The Cleanup option controls how long
messages remain in the MMS Inbox and MMS
Outbox before they are deleted. You set the
cleanup option for the Inbox and Outbox
separately.
The cleanup option only deletes unlocked read
messages from the Inbox, and sent
messages from the Outbox for MMS.
main attractions
44
option
option
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
Custom: Lets you create a clean-up option of
up to 99 messages or 99 days.
3
Press
-
under Yes to automatically delete
messages now or press
delete messages later.
-
under No to
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
delete multiple or all messages
To delete multiple messages, all read and
unread unlocked messages from the MMS
Inbox, all messages in the MMS Drafts folder,
or all successfully sent messages in the MMS
Outbox:
1 Day: Messages are deleted if they are older
than 1 day.
3 Days: Messages are deleted if they are
older than 3 days.
With these options, messages are deleted
when you exit the message center after
setting the option.
Find it:
/
>
Messages
Select Inbox Drafts, or Outbox
MMS Inbox MMS Drafts, or MMS
Delete Multiple, and check the
1
2
,
.
F-In F-Out: The earliest message added to the
queue will be the first to be deleted (First in/
first out). (MOSMS only)
Press
Outbox
/
>
>
,
/
>
messages you want to delete.
main attractions
45
or
access the microbrowser
3
Select Delete All and press
confirm.
-
under Yes to
The first time you use the microbrowser, you
will be required to go through a security setup
process that takes approximately one to three
minutes. Please follow the on-screen prompts
to complete the security setup process. This
setup process will only occur the first time
you use the service.
Note: Locked messages cannot be deleted
from the Inbox.
Mike wireless web
services
Find it:
/
>
Browser
1
Once connected, the Homepage (or the
last page visited) will be displayed. To
access the Home menu page from any
other menu in the microbrowser, press
Your handset is equipped with a
microbrowser that can be used to access
Mike's Wireless Web Services and other up-
to-the-minute information. You can view
specially designed text versions of popular
Internet sites that provide news, sports,
weather, entertainment, stock quote sites,
and other useful information.
@
.
2
To view additional text while visiting a site,
use the navigation key to scroll to read it.
navigate the microbrowser
When you use the microbrowser, some keys
on your handset operate differently than
main attractions
46
during a normal phone call. These keys are
explained below:
3
Press
-
under Ok to initiate the option.
option
@
Home key - press to return to the
default Home page (the page
first seen when you launch the
browser). Press and hold for
two seconds to exit the
browser.
Exit Browser - closes the browser and returns
you to the idle screen. Use this option
when you want to return to the page
currently viewed at a later time, without
navigating through the entire menu
structure again.
*
Asterisk/Back key - press to return to
the previous page viewed
before the current page.
Reload - reloads the current Wireless Web
page viewed, refreshing the information
with the most current from the information
provider.
access the browser menu
Home - returns you to your default Home
page, the first page you see when launching
the microbrowser.
1
Press and hold
menu.
/
to access the browser
Bookmarks - allows you to access bookmarks
you have created using the Bookmark
option.
2
Scroll to select the desired option.
main attractions
47
The Bluetooth connection menu contains an
option to search for audio devices.
option
Mark Site - identifies sites you would like to
visit easily and quickly from your
microbrowser.
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
About Phone.com - contains information about
the version of the Phone.com browser
loaded on your handset.
Find it:
/
>
Bluetooth
>
Setup
>
Power
>
On
Advanced Options - helps troubleshoot any
service issues you may have with your
browser.
1
Select Name if you wish to assign a name
to your handset.
2
Select Find Me Time to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
end the microbrowser session
At any point in the session, press and hold
for two seconds to exit the microbrowser.
@
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
®
Bluetooth
Your phone supports the use of wireless
Bluetooth headsets.
Find it:
/
>
Bluetooth
main attractions
48
Bluetooth device’s user guide to locate
this information.
make a Bluetooth connection
connect your phone with a Bluetooth
headset
If a device ships without a Bluetooth PIN,
then refer to its user guide to set the PIN
on that device. To establish a connection
to that device, enter the same PIN for
both your phone and the device. For
example, if you enter 1234 as the device’s
PIN, then enter 1234 as your phone’s PIN.
Find it:
/
>
Bluetooth
>
Hands Free [Find Devices]
>
1
Follow the instructions on your Bluetooth
headset to set it up to be found.
2
Once your Bluetooth headset is set to be
found press
phone will scan the Bluetooth headset
until it finds it. Press when you see the
r
on your handset. Your
5
Press
-
under Ok.
r
Note: This handset offers a Bluetooth auto
pair feature with auto pair compatible
Motorola devices. When bonded via
Bluetooth with a certain device, the pin will
not be required.
name of the Bluetooth headset on your
screen.
3
Your phone requires that you create a
bond in order to connect with a Bluetooth
headset. Press
-
under Yes when you
connect your phone with another
device
are prompted to bond with the headset.
4
Enter the Bluetooth pass key.
Find it:
/
>
Bluetooth Link To Devices
>
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
main attractions
49
1
2
Select the device you want from the list of
found devices on your screen.
send information via Bluetooth
You can use your phone to send Contacts
entries, or Datebook events to another
Bluetooth device.
Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
Note: Files sent or received may be up
to 200 kb, depending on your service
provider.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
send Contacts
Note: If the Handsfree Devices list contains only
one device, then your phone will automatically
try to connect to that device.
Shortcut: From the home screen press
under Contcs
-
.
1
2
3
Select the contact you want to send.
1
2
While in a call, press
Press under Yes to power On
Bluetooth.
Select the audio device you want to
/
>
Use Bluetooth.
Press
Press
/
>
Send Via...
>
Bluetooth.
-
-
under Yes to power On
Bluetooth.
3
connect to from the list of Handsfree Devices
.
main attractions
50
4
Select the device you want to transfer the
contact information to.
To send only the selected instance of the
event, select This Event Only
.
or
or
Search for the device by selecting [Find
To send all instances of the event, select
Devices]
.
Repeat Events
.
5
If prompted, bond with the device.
3
Press
Bluetooth.
-
under Yes to power On
Your phone connects with the device and
transfers the contact.
4
Select the device you want to transfer the
contact information to.
send a Datebook event
Find it: Datebook
or
/
>
Search for the device by selecting [Find
Devices]
1
Select the datebook event you want to
send.
.
5
If prompted, bond with the device.
2
Press
/
>
Send Via...
>
Bluetooth.
Your phone connects with the device and
sends the datebook event.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
main attractions
51
basics
status indicators
Status indicators are shown at the top of the
home screen:
display
1. 2. 3. 4.
5. 6. 7.
The home screen shows when you turn on
the phone. To dial a number from the home
Ready
10:05pm 10/23
screen, press number keys and
`.
Note: Your home screen may look different.
Ready
10:05pm 10/23
Date and
Time
1
2
Signal Strength Indicator: Vertical bars show
the strength of the network connection. You
Left
Right
can’t make or receive calls when
shows.
1
or
0
Soft Key Label
Soft Key Label
Soft key labels show the current soft key
Active Phone Line: 1 indicates phone line 1 is
ready to make calls.
functions. For soft key
page 1.
-
locations, see
basics
52
3
Speaker Off: Sounds associated with Private
calls and group calls are set to come through
the earpiece rather than through the speaker.
change the character input mode:
1
When you see a screen where you can
enter text, press to change the
/
character input mode.
4
Ringer Off: Your phone is set to not ring.
2
Select one of the following options:
5
Message Indicator: Shows when you
receive a text message.
entry modes
6
7
Packet Data: Your handset is ready to transfer
Alpha
Press a key several times for
each character.
packet data or is transferring packet data.
Battery Charge Indicator: A fuller battery
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
indicates a greater charge. Recharge the
battery when your phone shows Low Battery
.
Symbols
Numeric
Enter symbols.
text entry
Some features let you enter text.
Enter numbers by pressing the
numbers on the keypad.
Your phone provides convenient ways to enter
words, letters, punctuation, and numbers
whenever you are prompted to enter text (for
example, when adding a Contacts entry or
when text messaging).
Languages Lets you select the input
language.
basics
53
Tip: When entering text, press and hold
#
to
and hold
entire entry.)
-
under Delete or
*
to delete an
change letter capitalization (Abc
>
ABC
>
abc).
3
To accept a word and insert a space,
press
word mode
#
.
Word English Text Input lets you enter text
into your phone by pressing keys just once
per letter.
alpha mode
enter characters by tapping the keypad:
Word English Text Input analyzes the letters
you enter using an intuitive word database
and creates a suitable word. (The word may
change as you type.)
1
Select the Alpha mode.
2
Press the corresponding keys repeatedly
until the desired letter appears. (For
example, to enter the word Jeff, press
5
enter a word using Word Character
Input:
once,
3
two times,
3
three times, and
3
three times again. If you make a
1
Select the Word character input mode.
mistake, press
single character. Press and hold
Delete to erase an entire entry.)
-
under Delete to erase a
-
under
2
Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Jeff, press 5 3 3 3). (If
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
you make a mistake, press
*
-
under Delete
or to erase a single character. Press
basics
54
space after two seconds or when you enter a
character on a different key.
volume
Press the volume keys up
or down to:
Characters scroll in the following order:
characters
•
•
•
turn off an incoming
call alert
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£ $ ¥
change the earpiece
volume during calls
2
3
4
5
6
7
8
9
0
#
*
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
change the ringer
volume from the
home screen
J K L 5
Tip: You can quickly set your ringer to
Vibrate All by holding the down volume
key in the home screen.
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space
Back
basics
55
navigation key
transmitters
Press the navigation key
up, down, left, or right to
scroll to items in the
Note: Consult airline staff about the use of
the Transmitters feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
display. When you scroll
to something, press
r.
Transmitters turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
turned Off.
handsfree speaker
You can use your phone’s hands-free speaker
to make calls without holding the phone to
your ear.
Find it:
/
>
u
>
Advanced
>
Transmitters
>
Off
During a call press the
use GPS with map
software
speaker key
s
to
turn the hands-free
speaker on.
Your phone can be connected to a PC, laptop,
or PDA via USB for use as a GPS receiver. For
more specific information on how to setup
your phone for use with your computer please
The hands-free speaker stays on until you
press the speaker key or end the call. The
next phone call will redirect the audio back to
the earpiece.
basics
56
visit www.motorola.com/support and look under the
FAQ section.
may need to adjust your hearing aid (HA)
volume setting.
features for the hearing
impaired
using your phone with a
hearing aid
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
For best results use the following optimization
procedures and handset setting. They
generally apply as well for users with cochlear
implants:
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
microphone coupling is obtained. You also
basics
57
3
Set this option to Off (factory default). This
is the setting for non HA users.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
Approximate telecoil location is just
above the battery.
choose your hearing aid setting
Find it: Settings Phone Calls Hearing Aid.
/
>
>
>
1
Set this option to Microphone. Microphone
coupling is now optimized.
or
2
Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
or
basics
58
calls
The recent calls list displays up to 20 of the
most recent calls and call alerts.
Find it:
/
>
Recent Calls
recent calls
The Recent Calls list contains information
associated with calls you have made and
received and call alerts you have received.
Tip: You can also access the Recent Calls list
by pressing the navigation key down.
1
2
Scroll through the list.
When you send or receive Private calls, the
Recent Call list contains the following PTT
items with those calls:
Highlight the item you want to view or
perform some action on.
3
To view more details of the item press
r.
•
•
•
•
•
Messages
Pictures
Events
store an item to contacts from
recent calls
Phone calls, Private calls, My Info received
from other phones, or Contacts entries
received from other phones can be stored to
the Contacts list from the Recent Calls list.
My Info
Contacts
calls
59
Find it:
/
>
Recent Calls
voice names
You can place calls by speaking commands to
your phone if you have previously assigned a
voice name to your contacts.
1
Scroll to or select the item you want to
store.
2
Press
-
under Save to store the
information as a new entry in the
Contacts list.
assign voice names to contacts
1
2
3
4
Press
- under Contcs and select [New
or
Contact]
.
3
If Save is not one or you options, press
/
Assign a name, phone number and select
[Options]
>
Update Contacts. And select the contact
.
you want to update.
Select Voice Name and follow the prompt to
record the voice name.
4
Press under Done to save your changes.
-
Press
save the entry.
-
under Back and
-
under Done to
redial
To redial your last outgoing phone call, press
and hold or push the PTT button if it was a
private call.
place a call using voice command
From the home screen press and hold the
speaker key until you are prompted to
say the voice name.
The handset will automatically place the call.
`
1
s
calls
60
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
caller ID
Caller ID allows people to identify a
caller before answering the phone by
Find it:
/
>
Call Forward
displaying the number of the incoming call. If
you do not want your number displayed when
you make a call, just follow these easy steps.
1
To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
To block your phone number from being
displayed for a specific outgoing call:
or
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and choosing the following options:
1
2
3
Press * 6 7..
Enter the number you want to call.
Press
`.
If Busy: When your handset is on a call or
transferring data.
To permanently block your number, call your
service provider’s Customer Care.
If No Answer: When you do not answer on
the first 4 rings.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
If Unreachable: When your handset is out of
coverage or powered off.
calls
61
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
phone is locked or the SIM card is not
inserted.
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Note: Emergency calls cannot be placed
while the keypad is locked.
Your phone supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
phone.
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
international calls
If your phone service includes international
dialing, press and hold 0 to insert your local
calls
62
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
temporary prepend will be inserted to the
number you are dialing.
You can additionally enable a predefined prefix
to the dialing number by using Prepend dialing.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
Find it:
/
>
Settings
>
Phone Calls
>
.
Prepend
1
2
Select Prepend and set it to On
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
Select Number and add the prefix number of
your choice.
When the Prepend feature is set to On, the
predefined prefix is inserted to the front of
the number that you are dialing.
2
3
Press
Press
#.
`
.
Except that the number is led by "*", "00",
"011" or the number contains "+".
turbo dial
Note: You can also use Prepend temporarily
when the feature is set to Off. For example,
enter the phone number from the home
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
screen and press
/
>
Add Prepend. The
calls
63
advanced voice mail with fax
Mike's Advanced Voice Mail with Fax allows
you to receive faxes directly to your handset
and store them along with your voice
messages until you are ready to print. Follow
the voice mail prompts to print the fax to a fax
machine. It ensures privacy, convenience and
eliminates the need for a separate fax line.
voice mail
Note: To receive voice mail messages, you
must first set up a voice mail account with
your service provider.
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
When you subscribe to Mike's
To check voicemail messages press
-
under
Advanced Voice Mail with Fax, you will
receive a fax number from your point of
feature activation. If you have not received a
fax number, please contact the nearest
TELUS dealer or call TELUS client care.
Call
.
To dismiss the message notification:
If the flip is closed, press the smart key
the top.
(
on
Please see www.telusmobility.com for
more details of TELUS Voice Messaging
services.
If the flip is open, press
flip.
r,
Back, or close the
If the caller leaves a message, this icon
3
appears on the display, reminding you that
you have a new message.
calls
64
fax mail Indicator
Your handset is equipped with a Fax Mail
indicator to notify you when you have
received a fax through Mike's Advanced Voice
Mail with Fax.
Shortcut: From the home screen press
under Mesg
-
>
Fax Mail.
When you receive a new fax, New FaxMail
Message appears on the display.
Your handset will alert you audibly until you
press
-
under Call or
-
under Exit.
net alerts
When you receive a Net Alert, a notification
appears on the display.
If you dismiss the notification, this icon w
appears on the display, reminding you that
you have a new message.
calls
65
customize
making a sound. Silent sets your phone to
neither vibrate nor make a sound.
ring tones
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
Tip: Highlighting a ring tone lets you hear
it.
3
Select the features you want to assign the
ring tone to.
Note: Only ring tones stored in your phone’s
memory are available in the ring tones list.
Not all audio files can be assigned as ring
tones.
4
When you are finished, press Done
appears on the display if
you set your phone to Silent. This icon
appears on the display if you set the phone to
.
Note: This icon
,
5
Find it: / > Ring Tones
Vibrate All
.
1
2
Make sure Vibrate All is set to Off.
Scroll through the list of ring tones and
select the one you want to assign. Vibrate
sets your phone to vibrate instead of
set your phone to vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, call alerts,
customize
66
messages notifications, pictures sent using
Send via PTT, and Datebook reminders.
1
2
3
Make sure Vibrate All is set to Off.
Select Vibrate from the list of ring tones.
Find it:
/
>
Ring Tones
>
Vibrate All
Select the features you want to set to
make no sound.
1
Set this option to On or Locked
.
Setting this option to On lets you turn Vibrate
All off by pressing the up volume control.
Setting this option to Locked requires you to
press and hold the up volume control to
turn Vibrate All off. The Locked option helps
prevent you from accidentally turning
Vibrate All off.
4
When you are finished, press
-
under
Done
.
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s home
screen or throughout all menu screens.
To set Vibrate All to On or Locked using the volume
controls: Press the volume controls to turn
down the volume as far as possible to set
Vibrate All to On. Continue to hold the down
Find it:
Wallpaper
/
>
Settings
>
Display/Info
>
Wallpaper
>
.
To select a wallpaper image scroll through the
list of pictures and press
picture of your choice.
volume control to set Vibrate All to Locked
.
r
to select the
To set your phone to vibrate instead of making
a sound for some features but not others:
Note: You can set the wallpaper to change
automatically after a certain period of time by
Find it:
/
>
Ring Tones
customize
67
turning on the Auto Cycle feature located in the
Wallpaper menu.
option
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
backlight
Set the amount of time that the display and
java apps. backlights remain on, or turn off the
backlight feature to extend battery life.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Find it:
/
>
Settings
>
Display/Info
>
Backlight
datebook
Find it:
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
/
>
Datebook
>
/
>
Setup
You can view or change these options:
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format.
option
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
customize
68
permission. GPS-enhanced 911 is not
available in all areas.
hide or show
location information
Your phone is equipped with a Location
feature for use in connection with location-
based services that may be available in the
future.
set your privacy options
Find it:
/
>
GPS
>
Privacy
Select Restricted
,
Unrestricted, or Ask Access
.
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except for
your local emergency response center.
Note: Turning Location on will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
customize
69
other features
advanced calling
feature
feature
3-way call
Make or receive a
phone call and press
call waiting
Find it: To accept the
second call and put
/
>
3 Way. Enter the
second phone number,
press and under Join.
the active call on hold press
`
-
-
under Yes.
Tip: For quick ways to enter
the number, press to
see the dialing menu.
To accept the second call
and end the active call press
/
`
.
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
Your phone rings with the
second call for you to
answer.
other features - advanced calling
70
feature
contacts
feature
flip
activation
To make your handset to
answer and end calls by
opening and closing the flip
edit/delete
Press
-
under Contacts.
contact entry Select a contact and press
press
/
>
u
>
/
>
Edit. Change the
Phone Calls
Select Flip To Ans
Flip to End On
>
Flip Activation
.
desired content and press
>
On and
-
under Done
.
>
.
set ringer ID
Press
-
under Contacts.
any key
answer
To answer phone calls by
pressing any key on the
Select a contact and press
Ringer. Select
desired ringer, press
under Back, and under
Done
/
>
Edit
>
keypad press
/
>
u
>
On
-
Phone Calls
>
Any Key Ans
>
.
-
.
other features - contacts
71
datebook
feature
feature
receive
datebook
events via
PTT
To view the information
while still in the Private call
create
datebook
events
To create a new Datebook
event press
press
r.
/
>
D
>
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent
calls list.
[New Event].
see datebook To see a calendar event
event
press
/
>
D
> use the
navigation key to scroll left
or right to see the day and
up or down to see the
events.
To store events to the
Datebook press
-
under
Save while viewing the event
you want to store.
event
reminder
When an event reminder
occurs press
Press
the reminder.
-
under View
.
-
under Back to close
other features - datebook
72
GPS
To improve GPS performance:
feature
set GPS
privacy
options
To set the level of privacy for
your GPS system press
/
>
•
•
Stay in the open,
GPS
>
Privacy.
Move away from other electrical or
electronic devices
If your GPS PIN security
feature is enabled, enter your
GPS PIN and select the
privacy option you want.
•
Remain stationary.
feature
change GPS Note: Your default GPS PIN is
PIN
view
To see your approximate
0000.
approximate location press
/
>
GPS
>
To change your GPS PIN press
location
Position. Scroll to view the
entire screen.
/
>
Settings
>
Security
>
Change
Passwds GPS PIN
>
.
To recalculate position press
Rfrsh. This may take several
minutes.
Enter the current GPS PIN and
enter the new 4- to 8-digit
GPS PIN. Re-enter the new
4- to 8-digit GPS PIN to
confirm.
other features - GPS
73
handsfree
personalize
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products
feature
language
To set the language of your
menu press
/
>
Settings
.
>
Display/Info
>
Language
backlighttime To select how long the
length
display screen and keypad
are backlit press
/
>
Settings
>
Display/Info
>
Backlight.
feature
menu style
To show the Main Menu as
graphic icons or a text-based
speaker-
phone
To activate the
speakerphone while
driving press and hold
the speakerphone key
list press
Display/Info
/
>
Settings
>
>
Menu View
.
s
.
clock display To display the clock on your
home screen press
auto answer
To automatically answer
calls when connected to a
car kit or headset press
/
>
Settings
Display
>
>
Display/Info
On
>
Clock
>
.
/
>
Settings
>
Phone Calls
>
Auto Ans. Select the amount
of rings before answering.
other features - handsfree
74
pc applications
feature
feature
change the
TTY baud
rate
From the home screen
press
/
>
Settings
>
other PC
For a list of complete PC
Phone Calls
>
TTY Baud.
>
applications applications visit
Select 45.45 or 50.00
.
www.motorola.com/support
change TTY While in the TTY call, press
mode
/
>
In Call Setup
>
TTY
>
Type
.
TTY
during a call
Select from TTY
,
VCO or HCO
.
feature
turn On TTY From the home screen
security
feature
feature
press
Phone Calls
/
>
Settings
>
>
TTY Use TTY
>
>
On.
phone lock
To lock the phone press
choose TTY From the home screen
mode press
/
>
Settings
Phone Lock Lock Now or
Auto Lock
>
Security
>
/
>
Settings
>
>
Phone Calls
>
TTY Type.
>
.
Select from TTY VCO or HCO.
,
other features - pc applications
75
feature
keypad lock To lock the keypad press
/
>
Settings
Keypad Lock
Auto Lock
>
Security
Lock Now or
>
>
.
Shortcut: To lock the
keypad press
enable SIM To enable SIM PIN, press
PIN
/
>
*.
/
>
Settings
>
Security
>
SIM PIN On
>
.
change SIM To change the SIM PIN,
PIN press
/
>
Settings
>
>
Security
.
>
Change Passwds SIM PIN
Note: You can make emergency calls on a
other features - security
76
Legal and Safety
•
•
•
•
•
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
Safety and General Information
This section contains important information on the safe and
efficient operation of your mobile device. Read this
information before using your integrated multi-service
portable radio.*
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
Exposure to Radio Frequency (RF) Energy
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the power
level at which your phone transmits.
Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
Your mobile device is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
•
•
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
Portable Radio Product Operation and EME
Exposure
ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) “Regulation of the limitation of exposure to
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
*
The information provided in this document supersedes the general
safety information in user’s guides published prior to May 1, 2006
Legal and Safety
77
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz.”
“Attachment to Resolution 303 from July 2, 2002."
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips
.
Operational Precautions
For optimal mobile device performance, and to be sure that human
exposure to RF energy does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions.
If you wear the mobile device on your body,
always place the mobile device in a Motorola approved clip,
holder, holster, case or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola and are not using the
mobile device in the intended use positions along side the head in
the phone mode or in front of the face in the two-way radio mode,
or if you hang your device from a lanyard around your neck, keep
the device at least 2.5 centimeters (1 inch) from your body when
transmitting.
Phone Operation
When placing or receiving a phone call, hold your mobile phone as
you would a landline telephone. Speak directly into the
microphone
.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/phoneaccessories.
Two-way radio operation
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your mobile device may cause interference with
other devices.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
Legal and Safety
78
your mobile device with your implantable medical device, consult
your health care provider.
Follow Instructions to Avoid Interference
Problems
Turn OFF your mobile device in any location where posted notices
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to
do so by airline staff. If your mobile device offers an airplane mode
or similar feature, consult airline staff about using it in flight.
Other Medical Devices and Health Care Facilities
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this mobile
device.
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Persons with implantable medical devices should observe the
following precautions:
Caring for the Environment by
Recycling
•
ALWAYS keep the mobile device more than 20
centimeters (8 inches) from the implantable medical
device when the phone is turned ON.
This symbol on a Motorola product means the
product should not be disposed of with household
waste.
•
•
DO NOT carry the mobile device in the breast pocket;
Use the ear opposite the implantable medical device to
minimize the potential for interference.
•
Turn OFF the mobile device immediately if you have any
reason to suspect that interference is taking place.
Disposal of your Mobile Device and Accessories
Please do not dispose of mobile devices or electrical accessories
(such as chargers, headsets, or batteries) with your household
waste. These items should be disposed of in accordance with the
national collection and recycling schemes operated by your local or
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Legal and Safety
79
regional authority. Alternatively, you may return unwanted mobile
devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved
national recycling schemes, and further information on Motorola
recycling activities can be found at: www.motorola.com/recycling
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
Disposal of your Mobile Device Packaging and
User’s Guide
Product packaging and user’s guides should only be disposed of in
accordance with national collection and recycling requirements.
Please contact your regional authorities for more details.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Symbol Key
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Driving Precautions
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Symbol
Definition
032374o
Important safety information
follows.
Responsible driving practices can be found in the “Smart Practices
Do not dispose of your battery
or phone in a fire.
Operational Warnings
Obey all posted signs when using Mobile devices in public areas.
Legal and Safety
80
Keep Your Mobile Device and Its Accessories
Away from Small Children
These products are not toys and may be hazardous to small
children. For example:
Symbol
Definition
Your battery or phone may
require recycling in
032375o
accordance with local laws.
Contact your local regulatory
authorities for more
•
•
A choking hazard may exist for small, detachable parts.
Improper use could result in loud sounds, possibly causing
hearing injury.
information.
Do not throw your battery or
phone in the trash.
•
Improperly handled batteries could overheat and cause a
burn.
Your phone contains an
internal lithium ion battery.
Glass Parts
Li Ion BATT
032378o
Some parts of your mobile device may be made of glass. This glass
could break if the product is dropped on a hard surface or receives
a substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your mobile device until the glass is replaced
by a qualified service center.
Do not let your battery,
charger, or phone get wet.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
Batteries and Chargers
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your mobile device.
Legal and Safety
81
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Caution About High Volume Usage
Warning: Warning: Exposure to loud noise from any
source for extended periods of time may affect your
hearing. The louder the volume sound level, the
Service and Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support, where you can select from
a number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing
impaired).
less time is required before your hearing could be
affected. To protect your hearing:
•
•
•
Limit the amount of time you use headsets or headphones
at high volume.
Avoid turning up the volume to block out noisy
surroundings.
Export Law Assurances
Turn the volume down if you can’t hear people speaking
near you.
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
If you experience hearing discomfort, including the sensation of
pressure or fullness in your ears, ringing in your ears, or muffled
speech, you should stop listening to the device through your
headset or headphones and have your hearing checked.
For more information about hearing, see our Web site at
www.motorola.com/hearingsafety (in English only).
Legal and Safety
82
•
It is normal over time for battery life to decrease, and for
the battery to exhibit shorter runtime between charges or
require more frequent or longer charging times.
Battery Use and Safety
•
Motorola recommends you always use
Motorola-branded batteries and chargers. The
warranty does not cover damage caused by non-Motorola
batteries and/or chargers.
Important: Handle and store batteries properly to avoid
injury or damage. Most battery issues arise from improper
handling of batteries, and particularly from the continued use of
damaged batteries.
Caution: Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
Improper battery use, or use of a damaged battery, may
result in a fire, explosion, or other hazard.
DON’Ts
•
Don’t disassemble, crush, puncture, shred, or
otherwise attempt to change the form of your
battery.
Don’t let the phone or battery come in contact with
water. Water can get into the phone’s circuits, leading to
corrosion. If the phone and/or battery get wet, have them
checked by your carrier or contact Motorola, even if they
appear to be working properly.
•
•
Battery usage by children should be supervised.
Important: Motorola mobile devices are designed to work
best with qualified batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the
following steps:
•
•
•
•
•
Remove the battery and inspect it to confirm it bears a
Motorola “Original Equipment” hologram;
•
•
•
Don’t allow the battery to touch metal objects. If
metal objects, such as jewelry, stay in prolonged contact
with the battery contact points, the battery could become
very hot.
If there is no hologram, the battery is not a qualified
battery;
If there is a hologram, replace the battery and retry
charging it;
Don’t place your battery near a heat source.
Excessive heat can damage the phone or the battery. High
temperatures can cause the battery to swell, leak, or
malfunction. Therefore:
If the message remains, contact a Motorola Authorized
Service Center.
•
When storing your battery, keep it in a cool, dry place.
Do not dry a wet or damp battery with an appliance or
heat source, such as a hair dryer or microwave oven.
Legal and Safety
83
•
Avoid leaving your phone in your car in high temperatures.
•
If the message remains, contact a Motorola authorized
service center.
DOs
Important: Motorola’s warranty does not cover damage to the
•
Do avoid dropping the battery or phone. Dropping
these items, especially on a hard surface, can potentially
cause damage.
phone caused by non-Motorola batteries and/or chargers.
Warning: Use of a non-Motorola battery or charger may present a
risk of fire, explosion, leakage, or other hazard.
•
Do contact your service provider or Motorola if your
phone or battery has been damaged from dropping
or high temperatures.
Proper and safe battery disposal and recycling: Proper
battery disposal is not only important for safety, it benefits the
environment. Consumers may recycle their used batteries in many
retail or service provider locations. Additional information on
proper disposal and recycling may be found on the Web:
Important: Use Motorola Original products for quality
assurance and safeguards. To aid consumers in identifying
authentic Motorola batteries from non-original or counterfeit
batteries (that may not have adequate safety protection), Motorola
provides holograms on its batteries. Consumers should confirm
that any battery they purchase has a “Motorola Original”
hologram.
•
•
www.motorola.com/recycling
www.rbrc.org/call2recycle/ (in English only)
Disposal: Promptly dispose of used batteries in accordance with
local regulations. Contact your local recycling center or national
recycling organizations for more information on how to dispose of
batteries.
Motorola recommends you always use Motorola-branded
batteries and chargers. Motorola mobile devices are designed
to work with Motorola batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the following
steps:
Warning: Never dispose of batteries in a fire because they may
explode.
•
•
•
Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
Battery Charging
If there is no hologram, the battery is not a Motorola
battery;
Notes for charging your phone’s battery:
•
When charging your battery, keep it near room
temperature. Never expose batteries to temperatures
below 0°C (32°F) or above 45°C (113°F) when charging.
If there is a hologram, replace the battery and retry
charging it;
Legal and Safety
84
•
•
New batteries are not fully charged.
accepted by the FCC and by Industry Canada with the mobile
device transmitting at its highest certified power level in all tested
frequencies. Although the SAR is determined at the highest
certified power level, the actual SAR level of the mobile device
while operating can be below the maximum value. This is because
the mobile device is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station, the lower
the power output.
New batteries or batteries stored for a long time may take
more time to charge.
•
Motorola batteries and charging systems have circuitry
that protects the battery from damage from overcharging.
Specific Absorption Rate
Your model wireless phone meets the governmental
requirements for exposure to radio waves.
Before a mobile device is available for sale to the public in the U.S.
and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each
government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
submitted to the FCC and available for review by Industry Canada.
The highest SAR value for this mobile device when tested for use
at the ear is 0.72 W/kg, and when worn on the body, as described
in this guide, is 1.03 W/kg. Body-worn measurements can differ,
depending upon available accessories and regulatory
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured to not exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed for the
safety of all persons, regardless of age or health, and to account
for any variations in measurements.
requirements. The SAR information includes the Motorola testing
protocol, assessment procedure, and measurement uncertainty
range for this product.
While there may be differences between the SAR levels of various
mobile devices and at various positions, they meet the
governmental requirements for safe exposure. Please note that
improvements to this product model could cause differences in the
SAR value for later products; in all cases, products are designed to
be within the guidelines.
The exposure standard for mobile devices employs a unit of
measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC and by the Canadian regulatory
authorities is 1.6 watts per kilogram (W/kg), averaged over one
gram of tissue. Tests for SAR are conducted using procedures
Legal and Safety
85
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site:
AGPS Performance Tips
•
Go outside and away from underground locations, covered
http://www.phonefacts.net
vehicles, structures with metal or concrete roofs, tall
buildings, and foliage. Indoor performance might improve
if you move closer to windows, but some window sun
shielding films can block satellite signals.
or the Canadian Wireless Telecommunications Association (CWTA)
Web site:
http://www.cwta.ca
•
Move away from radios, entertainment equipment, and
other electronic devices that might interfere with or block
AGPS satellite signals.
AGPS and Emergency Calls
When you make an emergency call, your mobile device can use
Assisted Global Positioning System (AGPS) satellite signals to tell
the emergency response center your approximate location.
The AGPS feature has limitations, so always tell the emergency
response center your best knowledge of your location. Remain on
the phone for as long as the emergency response center instructs
you.
AGPS uses satellites controlled by the U.S. government and
subject to changes implemented in accordance with the
Department of Defense AGPS user policy and the Federal Radio
Navigation Plan. These changes might affect AGPS performance.
Motorola Limited Warranty for the
United States and Canada
AGPS might not work for emergency calls, if your local
emergency response center does not process AGPS location
information. For details, contact your local authorities.
What Does this Warranty Cover?
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
If your mobile device cannot find strong AGPS satellite signals, the
location of the nearest cell tower in contact with your mobile
device is automatically provided to the emergency response
center.
Subject to the exclusions contained below, Motorola, Inc. warrants
its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and Motorola software
Legal and Safety
86
contained on CD-Roms or other tangible media and sold for use
with these Products ("Software") to be free from defects in
materials and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a
consumer's exclusive remedy, and applies as follows to
new Products, Accessories and Software purchased by
consumers in the United States or Canada, which are
accompanied by this written warranty:
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Ornamental Decorations. Ornamental decorations such as
emblems, graphics, rhinestones, jewels, gemstones and their
settings, and other decorative elements, are excluded from
coverage.
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.
Products Covered
Length of Coverage
Products as defined
above.
One (1) year from the date of
purchase by the first consumer
purchaser of the product.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or neglect,
such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not the
fault of Motorola, are excluded from coverage.
Accessories as
defined above.
One (1) year from the date of
purchase by the first consumer
purchaser of the product.
Products or
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
Accessories that are
Repaired or
Replaced.
Use of Non-Motorola Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or
certified Products, Accessories, Software or other peripheral
equipment are excluded from coverage.
Software as defined
above. Applies only to
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or floppy
disk).
Ninety (90) days from the date
of purchase.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, including without limitation, software
Legal and Safety
87
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from
coverage.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to
your Product, Accessory or Software, including but not limited to
personal contacts, games and ringer tones, will be reinstalled. To
avoid losing such data, software and applications please create a
back up prior to requesting service.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are excluded from
coverage.
How to Obtain Warranty Service or Other Information? To
obtain service or information, please call:
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Or visit us online at http://www.motorola.com/iden
Software Embodied in Physical Media. No warranty is made
that the software will meet your requirements or will work in
combination with any hardware or software applications provided
by third parties, that the operation of the software products will be
uninterrupted or error free, or that all defects in the software
products will be corrected.
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Software NOT Embodied in Physical Media. Software that is
not embodied in physical media (e.g. software that is downloaded
from the internet), is provided "as is" and without warranty.
What Other Limitations Are There? ANY IMPLIED
Who is covered? This warranty extends only to the first
consumer purchaser, and is not transferable.
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
What will Motorola Do? Motorola, at its option, will at no
charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
Legal and Safety
88
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
exercise of the exclusive rights reserved for Motorola, is
permitted.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
•
That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
•
That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or from one jurisdiction to another.
•
Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute
copies of the Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the Products
associated with such Motorola software. No other use, including
without limitation disassembly of such Motorola software or
Legal and Safety
89
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
damages arising from any claim of patent infringement or alleged
infringement.
Hearing Aid Compatibility With Mobile
Phones
Some Motorola phones are measured for compatibility with
hearing aids. If the box for your particular model has “Rated for
Hearing Aids” printed on it, the following explanation applies.
When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also
vary in the amount of interference they generate.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not all
phones have been rated. Phones that are rated have the rating on
their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the
user’s hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
Legal and Safety
90
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Product registration is an important step toward enjoying your new
Motorola product. Registering permits us to contact you for
product or software updates and allows you to subscribe to
updates on new products or special promotions. Registration is not
required for warranty coverage.
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
Information From the World Health
Organization
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your phone
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
Source: WHO Fact Sheet 193
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
Further information: http://www.who.int./peh-emf
.
Product Registration
Online Product Registration:
www.motorola.com/us/productregistration
http://recycling.motorola.young-america.com/ index.html
Legal and Safety
91
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
Software Copyright Notice
Motorola products may include copyrighted Motorola and third
party software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive
rights for copyrighted software, such as the exclusive rights to
distribute or reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola products may not
be modified, reverse-engineered, distributed, or reproduced in any
manner to the extent allowed by law. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
.
There is no special handling required by consumers.
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
Privacy and Data Security
Motorola understands that privacy and data security are important
to everyone. Because some features of your mobile device may
affect your privacy or data security, please follow these
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
recommendations to enhance protection of your information:
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
•
Monitor access—Keep your mobile device with you and
do not leave it where others may have unmonitored
access. Lock your device’s keypad where this feature is
available.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Legal and Safety
92
•
•
Keep software up to date—If Motorola or a
software/application vendor releases a patch or software
fix for your mobile device that updates the device’s
security, install it as soon as possible.
Smart Practices While Driving
SM
Drive Safe, Call Smart
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas—for example handsfree use
only. Go to www.motorola.com/callsmart (in English only)
for more information.
Erase before recycling—Delete personal information
or data from your mobile device prior to disposing of it or
turning it in for recycling. For instructions on how to delete
all personal information from your device, please contact
your local service provider.
Your mobile device lets you communicate by voice and
data—almost anywhere, anytime, wherever wireless service is
available and safe conditions allow. When driving a car, driving is
your first responsibility. If you choose to use your phone while
driving, remember the following tips:
•
Understanding AGPS—To provide location information
for emergency calls, certain Motorola mobile devices
incorporate Assisted Global Positioning System (AGPS)
technology. AGPS technology also can be used in
non-emergency applications to track and monitor a user’s
location—for example, to provide driving directions. Users
who prefer not to permit such tracking and monitoring
should avoid using such applications.
•
Get to know your Motorola mobile device and its
features such as speed dial and redial. If available,
these features help you to place your call without taking
your attention off the road.
If you have further questions regarding how the use of your mobile
device may impact your privacy or data security, please contact
provider.
•
When available, use a handsfree
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
handsfree accessories available today.
•
Position your mobile device within easy reach. Be
able to access your phone without removing your eyes
from the road. If you receive an incoming call at an
Legal and Safety
93
inconvenient time, if possible, let your voice mail answer
it for you.
danger, call 911 or other local emergency number
(wherever wireless phone service is available), as you
would want others to do for you.
•
•
•
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
•
Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number (wherever
wireless phone service is available).
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
•
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
•
•
Use your mobile device to call for help. Dial 911 or
other local emergency number in the case of fire, traffic
accident, or medical emergencies (wherever wireless
phone service is available).
Use your mobile device to help others in
emergencies. If you see an auto accident, crime in
progress, or other serious emergency where lives are in
Legal and Safety
94
F
N
frequently asked questions
L
G
O
GPS enabled
M
memory
message center
P
H
private calls
modem
I
using your handset as a
index
96
Q
quick notes
R
V
voice mail
ring tones
T
W
S
safety
index
97
|