Getting Started Guide
MOTO Q 9c by Motorola®
www.sprint.com
© 2007 Sprint Nextel. All rights reserved. SPRINT and other trademarks
are trademarks of Sprint Nextel.
Printed in the U.S.A.
Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Getting Started With Sprint Service . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features of Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Turning Your Device On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Inserting and Removing a miniSD Card . . . . . . . . . . . . . . . . . . . . . 29
2C. Getting Around Your Device . . . . . . . . . . . . . . . . . . . . . 32
Understanding the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Navigating Menus and Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Setting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Locking and Unlocking the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . 42
Locking and Unlocking the Device . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2D. Using Calling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Turning Off Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Using Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Synchronizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Using Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Controlling Your Roaming Experience . . . . . . . . . . . . . . . . . . . . . . 76
Using Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Using Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Setting Flight Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Shooting Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Setting Picture Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
2I. Using Media and Web Features . . . . . . . . . . . . . . . . . . 95
Using the Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Using the Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Downloading and Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Using the File Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
2J. Using Contacts and Calendar . . . . . . . . . . . . . . . . . . . . 102
Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Using Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
2K. Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Turning Bluetooth Power On or Off . . . . . . . . . . . . . . . . . . . . . . . . 109
Pairing With a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Sending Objects to Another Device . . . . . . . . . . . . . . . . . . . . . . . . 110
Using Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
3A. Sprint Service Features: The Basics . . . . . . . . . . . . . . . 116
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Using SMS Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Getting Started With Sprint Voice Command . . . . . . . . . . . . . . 133
Creating Your Own Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Making a Call With Sprint Voice Command . . . . . . . . . . . . . . . . 135
Getting Information With Sprint Voice Command . . . . . . . . . . 136
Section 4: Safety, Warranty, and
Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
4A. Important Safety Information . . . . . . . . . . . . . . . . . . . 138
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
FCC Notice To Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Hearing Aid Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Specific Absorption Rate Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Information From the World Health Organization . . . . . . . . . . 151
Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Phone Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Export Law Assurances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Wireless: The New Recyclable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
California Perchlorate Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Privacy and Data Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Smart Practices While Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
4B. Motorola’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Motorola Limited Warranty for
the United States and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Service and Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
4C. Microsoft End User License Agreement . . . . . . . . . . . 167
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Welcome to Sprint
Sprint and Nextel have come together offering you more choice
and flexibility to do whatever you want, just about whenever you
want.
This powerful combination brings you access to more
products, more services, and more of what you need, to do
more of what you want. Welcome to a future full of
possibility. Welcome to the new Sprint.
Welcome and thank you for choosing Sprint.
i
Introduction
This Getting Started Guide introduces you to Sprint Service and
all the features of your new device. It’s divided into four
sections:
ࡗ ࡗ ࡗ ࡗ Section 1: Getting Started
Section 2: Using Your Device
Section 3: Sprint Service Features
Section 4: Safety, Warranty, and Legal Information
Throughout this guide, you'll find tips that highlight special
shortcuts and timely reminders to help you make the most of
your new device and service. The Table of Contents and Index
will also help you quickly locate specific information.
You'll get the most out of your device if you read each section.
However, if you'd like to get right to a specific feature, simply
locate that section in the Table of Contents and go directly to
that page. Follow the instructions in that section, and you'll
be ready to use your device in no time.
the most recent version of the guide.
User Guide
Note:
Please refer to the Important Safety Information section
on page 138 to find information that will help you safely
use your device. Failure to read and follow the Important
Safety Information in this device guide may result in
serious bodily injury, death, or property damage.
WARNING!
ii
Section 1A
Setting Up Service
In This Section
ࡗ ࡗ ࡗ ࡗ Getting Started With Sprint Service
Setting Up Your Voicemail
Sprint Account Passwords
Getting Help
Setting up service on your new device is quick and easy. This
section walks you through the necessary steps to unlock your
device, set up your voicemail, establish passwords, and
contact Sprint for assistance with your wireless service.
2
Section 1A: Setting Up Service
Getting Started With Sprint Service
Setting Up Your Device
1. Install the battery (if necessary).
Ⅲ
Press the release button and remove the battery
cover from the back of the device.
Ⅲ
Insert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
Ⅲ
Replace the battery cover and press down until you
hear a click.
2. Press and hold the Power/End key (O) to turn the device
on.
Ⅲ
If your device is activated, it will turn on, search for
Sprint service, and go to the Home screen.
Ⅲ
If your device is not yet activated, you will see the
activation display. Follow the onscreen instructions
to activate your device.
For assistance with phone activation, call Sprint Customer
Service at 1-800-SPRINT1 (1-800-777-4681) from any
other phone.
Note:
3. Make your first call.
Ⅲ
Use your keypad to enter a phone number.
Press the Call/Answer Key (N).
Ⅲ
Your device's battery should have enough charge to turn on,
find a signal, set up your voicemail, and make a call. You
should fully charge your battery as soon as possible. See
“Charging the Battery” on page 27 for details.
Note:
Section 1A: Setting Up Service
3
Setting Up Your Voicemail
Unanswered phone calls are automatically transferred to
your voicemail, even if your device is in use or turned off.
Therefore, you may want to set up your voicemail and
personal greeting as soon as your device is activated.
To set up your voicemail:
1. From the Home screen, press and hold 1.
2. Follow the system prompts to:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Create your passcode.
Record your name announcement.
Record your greeting.
Choose whether or not to activate One-Touch
Message Access (a feature that lets you access
messages simply by pressing and holding 1,
bypassing the need for you to enter your passcode).
Voicemail Passcode
Note:
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends that you enable your
voicemail passcode.
For more information about using your voicemail, see
“Setting Up Your Voicemail” on page 117.
4
Section 1A: Setting Up Service
Sprint Account Passwords
personal account information, your voicemail account, and
your data services account. To ensure that no one else has
access to your information, you need to create passwords to
protect your privacy.
Account User Name and Password
If you are the account owner, you will create an account user
(Click Need to register for access? to get started.) If you are not
the account owner (if someone else receives the invoice for
your Sprint service), you can get a sub-account password at
Voicemail Password
You create your voicemail password (or passcode) when you
set up your voicemail. See “Setting Up Your Voicemail” on
page 4 for more information on your voicemail password.
Sprint Power Vision Password
You may elect to set up a Sprint Power Vision password. This
optional password can be used to authorize the purchase of
Premium Services content.
For additional information, or to change your passwords, sign
1-800-SPRINT1 (1-800-777-4681).
Section 1A: Setting Up Service
5
Getting Help
Visit www.sprint.com
You can go online to:
ⅷ
Access your account information.
ⅷ
Check your minutes used (depending on your
Sprint service plan).
ⅷ
ⅷ
View and pay your bill.
Make your life easier by enrolling in Sprint online billing
and automatic payment.
ⅷ
ⅷ
ⅷ
ⅷ
Purchase accessories.
Shop for the latest phones or devices.
View other Sprint service plans and options.
Learn more about Sprint Power Vision and other great
products like games, ringers, screen savers, and more.
Reaching Sprint Customer Service
You can reach Sprint Customer Service many different ways:
ⅷ
ⅷ
ⅷ
Dial
and then press N on your device.
*2
Call us toll-free at 1-800-SPRINT1 (1-800-777-4681).
Receiving Account Balance Information
For your convenience, your device gives you access to account
balance information on your Sprint account. You can also use
your device to pay your bill and check your current minutes.
To access your account balance or pay your bill:
ᮣ
Press
and then press N.
*3
6
Section 1A: Setting Up Service
To check your minutes:
Press and then press the Call/Answer key (N).
ᮣ
*4
Sprint 411
You have access to a variety of services and information
through Sprint 411, including residential, business, and
government listings; movie listings or show times; driving
directions, restaurant reservations, and major local event
information. You can get up to three pieces of information
per call, and the operator can automatically connect your call
at no additional charge.
There is a per-call charge to use Sprint 411 and you are billed
for airtime.
To call Sprint 411:
ᮣ
Press
and then press the Call/Answer key (N).
411
Sprint Operator Services
Sprint Operator Services provides assistance when placing
collect calls or when placing calls billed to a local telephone
calling card or to a third party.
To access Operator Services:
ᮣ
Press
and then press the Call/Answer key (N).
0
For more information or to see the latest in products and
Section 1A: Setting Up Service
7
8
Section 1A: Setting Up Service
Section 2A
About Your Device
In This Section
ࡗ ࡗ Features of Your Device
Getting More Information
Your device is packed with features that simplify your life
and expand your ability to stay connected to the people and
information that are important to you. This section lists some of
the great features of your device and tells you where to get
more information on using it.
10
Section 2A: About Your Device
Features of Your Device
Congratulations on the purchase of your MOTO Q 9c by
Motorola. Your new device is lightweight, easy-to-use, and
reliable, and it offers many significant features and service
options. The following list previews some of those features
and provides page numbers where you can find out more:
ⅷ
Dual band (800/1900 digital MHz) allows you to make
and receive calls while on the Sprint National Network
and to roam on other networks where Sprint has
implemented roaming agreements.
ⅷ
ⅷ
Full QWERTY keyboard lets you enter text easily (see
page 54.)
Email functionality supports multiple email inboxes:
POP3/IMAP4, Microsoft® Exchange, and Good Mobile
Messaging™ (page 65).
ⅷ
The synchronization features give you many ways to
synchronize your device with your computer: You can sync
wirelessly, using Microsoft® ActiveSync® 4.5 or later (on
Windows XP or prior versions of Windows) or Microsoft®
Windows Mobile Device Center (on Vista) with Microsoft®
Exchange Server 2003 or later, or using a Bluetooth®
connection; you can sync directly using the Motorola mini
USB data cable (page 58).
ⅷ
ⅷ
SMS Text Messaging provides quick and convenient
messaging capabilities (page 123).
The address book lets you store as many contacts as
available memory will hold. Both the address book and
calendar can be synchronized with the Microsoft
Outlook® contacts and calendar feature on your
computer (page 102).
ⅷ
Speed dial lets you dial phone numbers with fewer key
presses (page 51).
Section 2A: About Your Device
11
ⅷ
ⅷ
The miniSD card slot lets you expand your device’s
memory to hold whatever you need (page 29).
Bluetooth® capabilities let you pair your device to other
Bluetooth devices, including mono and stereo headsets
and handsfree devices. You may also pair with a personal
computer or handheld device for dial-up networking,
using your device as a wireless modem (page 108).
ⅷ
The built-in camera allows you to take full-color digital
pictures and videos (page 87).
ⅷ
ⅷ
ⅷ
The media player allows you to enjoy video clips and
listen to audio files with your device (page 96).
Internet Explorer Mobile lets you browse the Internet
(page 99).
Your device’s internet connection sharing capabilities let
you use your device as a modem for your laptop computer
(page 130).
ⅷ
ⅷ
Sprint Voice Command lets you dial phone numbers by
saying a name or the digits of a phone number
(page 135).
Voice recognition software lets you place calls and
perform quick tasks just by using your voice (page 111).
12
Section 2A: About Your Device
Getting More Information
In addition to this Getting Started Guide, there are many
resources you can go to for more information:
ⅷ
ⅷ
If you need help while using your device, go to the Home
screen and press Start (left softkey). Then select Help.
For detailed information on setting up email on your
device, see the Setting Up Email guide that came with
your device.
ⅷ
ⅷ
ⅷ
For more information on using ActiveSync, choose Help
from the ActiveSync menu bar when ActiveSync is open
on your computer.
For information on obtaining and installing certificates on
to your device, see the Motorola Q 9c Support Web site at
For more support information, see the Motorola Q 9c
You can also contact the Motorola Customer Support
Center at 1-800-657-7576 (United States and Canada) or
1-888-390-6456 (TTY/TDD United States for hearing
impaired).
ⅷ
ⅷ
Motorola Software Update is an easy and convenient way
to update your device to the latest available software.
Access the tool and check for updates at
For questions about your account or features available on
latest information and help.
Section 2A: About Your Device
13
Section 2B
Getting to Know Your Device
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ Your Device
Accessories
Turning Your Device On and Off
Using the Battery and Charger
Inserting and Removing a miniSD Card
section describes all the basic physical features of your device
and how to use them.
14
Section 2B: Getting to Know Your Device
Your Device
Front View of Your Device
1. Earpiece
18. Light
Sensor
2. Navigation
Key
17. Right
Softkey
3. Center
Select Key
16. Undo/Back
Key
4. Left Softkey
15. Power/End
Key
5. Call/Answer
Key
14. Enter Key
13. Caps Key
ò
6. Home Key
CAPS
Fn
7. Alt/Function
Key
12. Speakerphone/
Voice Recognition
Key
8. Microphone
9. Message/Display
Off Key
10. Space Key
11. Camera Key
Section 2B: Getting to Know Your Device
15
Side Views of Your Device
22. Thumb Wheel
19. Memory Card Slot
ò
Fn
Fn
21. Undo/Back
Button
20. Mini-USB Port
16
Section 2B: Getting to Know Your Device
Key Functions
1. Earpiece lets you hear the caller and automated
prompts.
2. Navigation Key (S) scrolls through the device’s menu
options and highlights items on the display. Use it to
move up, down, left, and right.
3. Center Select Key (s) selects the highlighted item when
navigating through a menu or around the display.
4. Left Softkey lets you select actions and menu items
appearing on the bottom left of the display screen.
5. Call/Answer Key (N) allows you to place or receive calls,
answer Call Waiting, and use Three-Way Calling.
6. Home Key (X) returns you to the Home screen and
gives you a shortcut to some frequently used functions.
Press the Home key (X) to return to the Home screen.
Press and hold the Home key (X) to display a Quick List
of frequently used functions.
character on any key.
8. Microphone allows the other caller to hear you clearly
when you are speaking to them.
9. Message/Display Off Key ( ) — Press this key to go to
your message Inbox. Press and hold this key to turn of
your display.
10. Space Key enters a space when you are entering text.
11. Camera Key (e) allows you to activate the built-in
camera and take pictures and videos.
12. Speakerphone/Voice Recognition Key (A) — Press this
key to turn the speakerphone on during a call. Press and
hold this key to activate voice recognition.
18
Section 2B: Getting to Know Your Device
13. Caps Key (Â) allows you to change between uppercase,
lowercase, and caps lock within a text input mode.
14. Enter Key (Á) starts a new line of text. When you are not
in text entry mode, it selects the highlighted item when
navigating through a menu or around the display.
15. Power/End Key (O) powers your device on and off and
ends a call. Press and hold O for two seconds to turn
your device on or off. Press O to end a call. Press O to
end most programs and return to the Home screen.
16. Undo/Back Key (À) deletes characters from the display in
text entry mode. When you are not in text entry mode,
it takes you to the previous screen or menu. This has the
same function as the Undo/Back button on the side of
your device.
17. Right Softkey lets you select actions and menu items
appearing on the bottom right of the display screen.
18. Light Sensor detects ambient light. This enables your
device to measure the available light and adjust the
screen brightness.
19. Memory Card Slot is where you insert a miniSD
(Secure Digital) memory card to expand the device’s
available memory space.
20. Mini-USB Port allows you to plug in the battery charger
or a mini-USB cable. It is not a headset jack.
21. Undo/Back Button takes you to the previous screen or
menu. This has the same function as the Undo/Back key
on the keypad.
22. Thumb Wheel scrolls through and selects menu options
and highlights items on the display. Turn the thumb
wheel to scroll. Press it to select the highlighted item. It
also controls Master volume. Press and hold and then
turn the thumb wheel to adjust the earpiece, speaker, or
headset volume.
Section 2B: Getting to Know Your Device
19
23. Camera Lens lets you capture clear pictures and videos.
24. Light Sensor adjusts the brightness of the display under
different lighting conditions for better screen visibility.
25. Camera Flash helps illuminate the pictures you take.
26. Speakers play ringers and alarms and provide stereo-
quality sound for speakerphone and audio playback.
27. Battery Door Release Button lets you open the battery
door.
28. Headset Jack lets you connect an optional stereo headset
to your device.
Accessories
Your device comes with a Lithium Ion (Li-Ion) battery, a
charger, and a mini-USB data cable.
Various accessories are available for use with your
stereo headsets, cases, vehicle power chargers, hands-free
accessories, and more.
1-888-242-4187, or stop by any Sprint Store. For information
It is best to carry your device in approved holsters or cases to
avoid damage when placing it in your pockets, purses, or
bags.
Note:
20
Section 2B: Getting to Know Your Device
Turning Your Device On and Off
Turning Your Device On
To turn your device on:
ᮣ
Press and hold the Power/End key (O) for
approximately two seconds or until the display turns on.
As your device connects to the network, you see a connecting
message. You may be required to enter identifying
information to use your device or to access specific features.
Turning Your Device Off
To turn your device off:
ᮣ
Press and hold the Power/End key (O) for three seconds
until you see the powering down animation on the
display screen.
Your screen remains blank while your device is off (unless the
battery is charging).
Section 2B: Getting to Know Your Device
21
Using the Battery and Charger
Use only Sprint-approved or Motorola-approved
batteries and chargers with your device. The failure to
use a Sprint-approved or Motorola-approved battery and
charger may increase the risk that your device will
overheat, catch fire, or explode, resulting in serious
bodily injury, death, or property damage.
WARNING!
Sprint-approved or Motorola-approved batteries and
accessories can be found at Sprint Stores or through
Motorola; or call 1-888-242-4187 to order. They’re also
Battery Capacity
Your device is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained.
Long backlight settings, searching for service, vibrate mode,
browser use, and other variables may affect battery life.
Note:
Be sure to watch the battery level indicator and charge the
battery before it runs out of power.
22
Section 2B: Getting to Know Your Device
Battery Use and Battery Safety
ⅷ
Motorola recommends you always use Motorola-branded
batteries and chargers. The warranty does not cover
damage caused by non-Motorola batteries and/or
chargers.
Use of an unqualified battery or charger may present a risk
of fire, explosion, leakage, or other hazard. Improper battery
use, or use of a damaged battery, may result in a fire,
explosion, or other hazard.
Caution:
ⅷ
ⅷ
Battery usage by children should be supervised.
Important: Motorola mobile devices are designed to work
best with qualified batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the
following steps:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Remove the battery and inspect it to confirm that it
bears a Motorola “Original Equipment” hologram;
If there is no hologram, the battery is not a qualified
battery;
If there is a hologram, replace the battery and retry
charging it;
If the message remains, contact a Motorola
Authorized Service Center.
ⅷ
ⅷ
New batteries or batteries stored for a long time may take
more time to charge.
Charging precautions: When charging your battery, keep it
near room temperature. Never expose batteries to
temperatures below 0°C (32°F) or above 45°C (113°F)
when charging. Always take your mobile device with you
when you leave your vehicle.
ⅷ
When storing your battery, keep it in a cool, dry place.
Section 2B: Getting to Know Your Device
23
ⅷ
ⅷ
It is normal over time for battery life to decrease, and for
the battery to exhibit shorter runtime between charges or
require more frequent or longer charging times.
Avoid damage to battery and mobile device. Do not
disassemble, open, crush, bend, deform, puncture, shred,
or submerge the battery or mobile device. Avoid dropping
the battery or mobile device, especially on a hard surface.
If your battery or mobile device has been subjected to
such damage, take it to a Motorola Authorized Service
Center before using. Do not attempt to dry it with an
appliance or heat source, such as a hair dryer or
microwave oven.
ⅷ
Use care when handling a charged battery — particularly
when placing it inside a pocket, purse, or other container
with metal objects. Contact with metal objects (e.g.,
jewelry, keys, beaded chains) could complete an electrical
circuit (short circuit), causing the battery to become very
hot, which could cause damage or injury.
Promptly dispose of used batteries in accordance with
local regulations. Contact your local recycling center
for proper battery disposal.
Never dispose of batteries in a fire because they may
explode.
WARNING!
24
Section 2B: Getting to Know Your Device
Installing the Battery
To install the Li-Ion battery:
1. Make sure the device is powered off.
2. Press and hold the battery door release button until the
battery door pops up slightly.
3. While still pressing the battery door release button,
slide the battery door toward the bottom of your device
and lift it off.
Section 2B: Getting to Know Your Device
25
4. Insert the top of the battery into the battery area. Be
sure the gold-colored areas on the battery are touching
the battery contacts on the device.
5. Press the battery down to secure it.
6. Replace the battery door, slide it toward the top of your
device, and press it gently until you hear a click.
26
Section 2B: Getting to Know Your Device
Removing the Battery
To remove your battery:
1. Make sure the device is powered off.
2. Remove the battery door.
3. Lift out the battery.
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.
WARNING!
Charging the Battery
Your device’s Li-Ion battery is rechargeable and should be
charged as soon as possible so you can begin using your
device.
Keeping track of your battery’s charge is important. If your
battery level becomes too low, your device automatically
turns off, and you will lose all the information you were just
working on. For a quick check of your device’s battery level,
glance at the battery charge indicator (J) located in the
upper-right corner of the display screen. If the battery charge
is getting too low, the device sounds a warning tone and a
warning screen appears.
Always use a Sprint-approved or Motorola-approved desktop
charger, travel charger, or vehicle power adapter to charge
your battery.
Section 2B: Getting to Know Your Device
27
Using the Charger
To use the charger provided with your device:
1. Plug the charger into an electrical outlet.
2. Plug the other end of the charger into the mini USB
port.
Your display screen lets you know the battery is charging.
With the approved Li-Ion battery, you can recharge the
battery before it completely runs down.
You can also charge your battery using a Motorola-approved
USB cable and a computer that supports charging through its
USB port.
Tip:
28
Section 2B: Getting to Know Your Device
If your battery has been completely drained, it cannot be
charged via the USB cable plugged into the computer (this
connection will only maintain current battery life). Use a wall
charger or car charger to recharge the battery. Some
computer USB ports provide a higher current than others, and
will provide more rapid charging.
Note:
The mini-USB port does not support headphones. You must
use 2.5 mm headphones or a Bluetooth mono or stereo
headset.
Inserting and Removing a miniSD Card
Your device supports the use of an optional miniSD (Secure
Digital) memory card (available separately) to expand the
device's available memory space. You can use cards with up to
32GB in memory, depending on market availability.
Using memory cards allows you to easily store images, videos,
music, and voice data in your device.
Don’t bend or scratch your memory card. Keep it away from
static electricity, water, and dirt.
Note:
The miniSD card and its adapter can be easily damaged by
improper operation. Please be careful when inserting,
removing, or handling them.
At the time of this printing, 8GB is the largest commercially
available miniSD card.
Section 2B: Getting to Know Your Device
29
To insert a miniSD card into your device:
1. Open the memory slot cover. Place your fingernail on
the ridge to pull the cover out slightly and then rotate it
up.
2. Insert the miniSD, with the contacts facing down, into
the exposed memory slot.
The writing on the miniSD card should face up.
Tip:
3. Press in on the memory card until it clicks into place.
30
Section 2B: Getting to Know Your Device
4. Place the memory card cover back in place and push to
close.
Make sure your battery is fully charged before using a miniSD
card. Your data may become damaged or unusable if the
battery runs out while using the miniSD card.
Note:
Be sure to use only recommended miniSD cards (64MB up to
32GB depending on market availability). Using non-
recommended miniSD cards could cause data loss and
damage your device.
To remove a miniSD card from your device:
DO NOT remove your memory card while your device is using
it or writing files on it. Doing so will result in loss or damage
of data.
Note:
1. Open the memory slot cover.
2. Press in on the memory card to eject it from the holder.
slot.
4. Place the memory card cover back in place and push to
close.
Section 2B: Getting to Know Your Device
31
Section 2C
Getting Around Your Device
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Understanding the Home Screen
Navigating Menus and Lists
Displaying Your Phone Number
Setting the Volume
Locking and Unlocking the Keypad
Locking and Unlocking the Device
Your device is designed to be easy to use. This section describes
how to navigate the Home screen and read the icons on it;
how to navigate the main menu and other menus and lists;
and how to perform other basic tasks you may want to know
about before you begin using your device.
32
Section 2C: Getting Around Your Device
Understanding the Home Screen
The Home screen displays when you turn on the device. You
can access all the functions of your device from the Home
screen.
ⅷ
To navigate icons or text in the Home screen, press the
Navigation key (S) up, down, left, or right, or turn the
thumb wheel. To select the highlighted item and perform
the action associated with it, press the Center Select key
(s) or press the thumb wheel.
ⅷ
ⅷ
Press the Home key (X) to return to the Home screen.
To dial a number from the Home screen, press number
keys and then press N.
Home Screen Details
When you get your device, the Home screen may look
something like the screen shown on the following page. This
is the default Sprint Home Screen layout.
You can choose another layout, as well as customize the look
of your Home screen in other ways, by following the
instructions in “Customizing the Home Screen” on page 80.
Some Home screen layouts show you more information and
options than others (the default Sprint Home Screen layout
shows the most), but all Home screen layouts show softkey
labels and the status indicator row.
Other information and options on the Home screen include:
time and date; shortcuts to main menu items; voicemail,
email, and text messages; your current profile; and your
upcoming Calendar appointments.
Section 2C: Getting Around Your Device
33
Status Indicator Row
Status indicators display at the top of the Home screen. These
are some of the status indicators that may appear in the
status indicator row:
ⅷ
Signal Strength Indicator (0)– Vertical bars show the
strength of the network connection. You can’t make or
receive calls when no vertical bars are displayed. Arrow
indicators above the signal strength bars indicate that
your device is ready and capable of making a data
connection.
ⅷ
Battery Level Indicator (J)– Vertical bars show the battery
charge level. Recharge the battery when your device
shows one or two bars. The icon will show an exclamation
point on the battery when it's very low and needs to be
recharged immediately.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Charging Indicator (Ù) – Shows that the device is
connected to a charger and is being charged.
Missed Call Indicator (E) – Shows when you have a missed
call.
Call Forwarding Indicator (D) – Shows when call forwarding
is on.
Roam Indicator (ã)– Shows when your device is seeking or
using a network other than the Sprint National Network.
Data Coverage Indicators – Show the types of data network
your device has located:
Ⅲ J – 1x-RTT coverage area.
Ⅲ
/ – EvDO coverage area. This type of coverage
delivers faster maximum download speeds to your
device.
Section 2C: Getting Around Your Device
35
ⅷ
Message Indicators – Show when you receive new
messages. Indicators can include:
Ⅲ C – new email or text message.
Ⅲ B – voicemail message.
ⅷ
Location/Data Indicators – Show when your device can
send location information # or not $. When in a data
session (data is currently being transferred to the device),
the data indicator (a) is displayed. If double arrows (e) are
displayed, your device is ready for and capable of making
a data connection.
Location and Data Indicators do not display on the screen
simultaneously.
Note:
ⅷ
Bluetooth Indicators – Shows Bluetooth connection status.
Indicators can include:
Ⅲ E – Shows when Bluetooth power is on.
Ⅲ Ó –Shows when your device is paired with another
Bluetooth device, such as a keyboard.
Ⅲ Ô – Shows when your device is connected to a
Bluetooth handsfree device.
Ⅲ
Õ
– Shows when your device is connected to a
stereo Bluetooth headset.
ⅷ
Profile Indicator – Shows the profile setting icon, if the
profile has an icon associated with it:
Ⅲ < – vibrate.
Ⅲ Q – silent.
ⅷ
ⅷ
Headset Indicator (Ò) – Shows when a compatible headset
is connected to your device.
Memory Card Indicator (Ö) – Shows when a miniSD card is
inserted in your device.
36
Section 2C: Getting Around Your Device
ⅷ
TTY Indicator (Ú) – Shows when your device is in TTY
mode, for use when making a call with a teletypewriter
device.
Other Home Screen Details
Depending on the Home screen layout you choose, you may
see any of the following on your Home screen:
ⅷ
ⅷ
ⅷ
The time alone or the time and date.
Your roaming status: home service or roaming.
Shortcuts to main menu items you recently used. Select
these icons to return to the corresponding main menu
item.
ⅷ
ⅷ
Your voicemail. This shows how many voicemail
messages you have and is a shortcut to your voicemail.
Your text messages alone or your text messages and
email messages. This shows how many messages you
have and is a shortcut to your messages.
ⅷ
ⅷ
Your profile. This shows your current profile and is a
shortcut to the profiles menu.
Your Calendar. This shows your upcoming appointments
and is a shortcut to your Calendar.
Navigating Menus and Lists
From the Home screen, press Start (left softkey) to open the
main menu.
Press the Navigation key (S) up, down, left, or right, or turn
the thumb wheel to see more menu items.
After you navigate to a program or other item you want to
open, press the Center Select key (s) or thumb wheel to open
the program or item.
Section 2C: Getting Around Your Device
37
The Main Menu
The following items are available in the main menu:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
g – Internet Explorer
O – On Demand
U – Software Store
m – Instant Messaging
c – Windows Media
G
org – Good Mobile Messaging
Good Mobile Messaging may not yet be available upon device
launch. For availability information, press Start (left softkey)
and select GetGood.
Note:
ⅷ
ⅷ
A – ActiveSync
T – Messaging:
Ⅲ
Text Messages
Email accounts that you set up
Ⅲ
ⅷ
ⅷ
% – Calendar
) – Settings:
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Phone
Sounds
Profiles
Home Screen
Clock & Alarm
Connections
Security
Remove Programs
Power Management
Accessibility
Regional Settings
38
Section 2C: Getting Around Your Device
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Owner Information
About
Phone Settings
TTY Settings
Unread Message Alert
Text Input Settings
PCS Vision
Customer Feedback
Windows Update
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
$ – Tasks
B – Call History
( – Contacts
3 – Speed Dial
\ – Voice Recognition
X – Voice Notes
] – Bluetooth
R – Internet Sharing
/ – File Manager
V – Help
8
– Keypad Lock
[ – Media Center
Y – Pictures & Videos
Z – Sprint Navigation
G – Sprint TV
- – Accessories
T – Documents To Go
T – Games
z – Personalize My Q
9 – System Tools
Section 2C: Getting Around Your Device
39
Other Menus and Lists
Some features require you to select an option from a list.
To navigate these screens:
ⅷ
ⅷ
ⅷ
Scroll up or down to highlight the option you want.
In a numbered list, press a number key to select an option.
In an alphabetized list, use the keyboard and press the
first letter of the desired item and the device will select
the closest matching list option.
ⅷ
When an option has a list of possible settings, noted by an
arrow displayed next to the option, scroll left or right to
select the setting.
ⅷ
ⅷ
When an option has a list of possible numeric values,
press a number key to set the value.
The More... option appears when a menu or list has more
items than fit on the screen. Select More... to view more
items in that menu or list.
ⅷ
Press Menu (usually the right softkey) to display
additional options.
Displaying Your Phone Number
Just in case you forget your phone number, your device can
remind you.
To display your phone number:
1. Press Start (left softkey).
2. Select Settings > Phone Settings > My Telephone Number.
You will need to press More (G) twice to display the Phone
Settings option.
Tip:
40
Section 2C: Getting Around Your Device
Setting the Volume
The thumb wheel on your device lets you set the volume of
the sound coming from the earpiece, speaker, or headset.
To adjust the volume of the sound coming from the earpiece,
speaker, or headset:
1. Press and hold the thumb wheel until the volume
screen appears.
2. Turn the thumb wheel to adjust the volume.
3. Press Done (left softkey) or wait for the previous screen
to reappear.
There are three types of volume on your MOTO Q 9c:
ⅷ
Master volume – Master volume controls the earpiece
volume and speaker volume for non-call functions.
Master volume controls are activated when you press and
hold the thumb wheel until you see the volume screen.
Adjusting volume on this screen sets the Master volume
of the phone. Master volume overrides Multimedia
volume.
ⅷ
Call volume – Call volume controls the earpiece volume
and the call-in-progress speaker volume. Call volume can
be adjusted by rolling the thumb wheel only while a call is
in progress. Adjusting the volume on this screen does not
affect Master volume or Multimedia volume.
ⅷ
Multimedia volume – Multimedia volume controls the
volume of music and videos playing on your device.
Adjust multimedia volume in the Media Player by rolling
the thumb wheel or pressing the navigation key up or
down.
Section 2C: Getting Around Your Device
41
The maximum volume within the Media Player is limited by
the master volume. To maximize volume for the Media Player,
first increase the master volume:
1. Press and hold the thumb wheel until the volume
screen appears.
2. Turn the thumb wheel to adjust the volume.
3. Press Done (left softkey) or wait for the previous screen
to reappear.
4. In the Media Player, turn the thumb wheel to set the
Multimedia volume, or press the navigation key up or
down.
Locking and Unlocking the Keypad
You can lock your device’s keypad to prevent buttons from
being accidentally pressed when you are not using the device.
To lock the keypad:
1. Press and hold the Home key (X).
2. When the Quick List displays, highlight and select Lock.
After the keypad is locked, the left softkey changes to
Unlock.
To quickly lock the keypad, press the Home key (X) and then
the space bar.
Shortcut:
To unlock the device keypad:
1. Press Unlock (left softkey).
2. When the unlock screen displays, press the * key.
42
Section 2C: Getting Around Your Device
Locking and Unlocking the Device
You can lock your device to keep others from using it. To lock
your device, you first need to set a password (PIN) through
the Security > Device Lock menu.
To quickly lock your device, press the Home key (X) and then
the space bar.
Shortcut:
To lock your device:
1. Press and hold the Home key (X). The Quick List
displays.
2. Highlight and select lock.
To unlock your device:
1. Press Unlock (left softkey).
2. When the unlock screen displays, enter your password
and press Unlock (left softkey).
Be certain to remember your password. Without your
password, you can reset your device, but it will result in the
loss of your personalized settings and all content stored in
device memory. To perform a hard reset, hold down the Center
Select key (s) for five seconds while turning the device on.
Tip:
You can make emergency calls on a locked device (see
page 47). A locked device still rings or vibrates for incoming
calls or messages, but you do not need to unlock it to answer
a call.
Note:
Section 2C: Getting Around Your Device
43
Section 2D
Using Calling Features
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Making and Answering Calls
Calling Emergency Numbers
Turning Off Call Alerts
Using Call History
Using Speed Dial
Redialing a Number
Making calls from your wireless device is as easy as making a call
from any landline phone. This section tells you how to do it and
describes your device’s many other calling features.
44
Section 2D: Using Calling Features
Making and Answering Calls
To make a call using the keypad:
1. From the Home screen, press the number keys to enter a
phone number.
2. Press the Call/Answer key (N) to make the call.
3. To end the call, press the Power/End key (O).
To answer an incoming call:
1. When your device rings, vibrates, or otherwise indicates
you have an incoming call, press N or Answer (left
softkey) to answer.
2. To end the call, press O.
You also have these options when you receive a call:
Ⅲ
Ⅲ
Ⅲ
If you are busy when a call comes in, press Ignore
(right softkey) to send the call directly to voicemail.
If you want to put a call on hold, press N. To return
to the call, press N.
If you are on a call and another incoming call comes
in, you can choose to Answer the call or Wait. If you
answer the call, the first call is put on hold and the
second is active. If you choose Wait, the second call
is directed to voicemail.
Ⅲ
To switch between the two active calls, press and
hold the N key.
To set your device to let you answer calls by pressing any key:
Press Start (left softkey) and then select Settings > Phone >
Call Options. Select the Any key answer checkbox. Press Done
(left softkey).
Tip:
Section 2D: Using Calling Features
45
Making Calls From the Contacts List
You can quickly dial a phone number from the contacts list.
1. Press Start (left softkey).
2. Select Contacts.
3. Select the contact phone number you want to call.
4. Press N to make the call.
5. To end the call, press O.
If you have a long list of contacts, you can use a shortcut to
find the contact you want. Enter the first few letters of the
contact's name. The device searches through the contacts list
and displays the name.
Tip:
For information on creating a contact, see “Creating a
Contacts Entry” on page 103.
Making a Call From a Hyperlink Phone Number
You can quickly dial a phone number from an email or text
message that contains a hyperlink phone number. A
hyperlink phone number is underlined in the same manner as
a Web site address.
1. From a message containing a hyperlink phone number,
select the phone number.
2. Press N to make the call.
3. To end the call, press O.
46
Section 2D: Using Calling Features
Calling Emergency Numbers
You can place calls to 911 — dial 911and press N — even if
your device is locked or your account is restricted.
Enhanced 911 (E911) Information
This device features an embedded Global Positioning System
(GPS) chip necessary for utilizing E911 emergency location
services where available.
When you place an emergency 911 call, the GPS feature of
your device begins to seek information to calculate your
approximate location. Depending on several variables,
including availability and access to satellite signals, it may
take up to 30 seconds or more to determine and report your
approximate location.
Always report your location to the 911 operator when
placing an emergency call. Some designated emergency
call takers, known as Public Safety Answering Points
(PSAPs) may not be equipped to receive GPS location
information from your phone.
IMPORTANT
Turning Off Call Alerts
You can roll the thumb wheel to turn off the ringer before
answering the call.
Section 2D: Using Calling Features
47
Using Speakerphone
The use of wireless phones while driving may cause
Note:
distraction. Discontinue a call if you can’t concentrate on
driving. Additionally, the use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products.
You can use your device’s handsfree speaker on calls without
holding the device to your ear.
To turn on speakerphone during a call:
ᮣ
Press the Speakerphone/Voice Recognition key (A).
– or –
ᮣ
Press Menu (right softkey) and then select
Speakerphone On.
When your device is connected to a car kit or headset, sound
does not come out of the speaker on the device.
Note:
With a Bluetooth headset, press Menu > Handsfree Off and
then press Menu > Speakerphone On.
To turn off speakerphone during a call, after you have turned it on:
ᮣ
Press the Speakerphone/Voice Recognition key (A)
again.
– or –
ᮣ
Press Menu (right softkey) and then select
Speakerphone Off.
48
Section 2D: Using Calling Features
Using Call History
Your device keeps a list of incoming and outgoing calls, even
for calls that didn’t connect. The most recent calls are listed
first. The oldest calls are deleted as new calls are added.
To view a Call History entry:
1. Press Start (left softkey) and select Call History.
2. Highlight a call.
Ⅲ
Ⅲ
Ⅲ
To call the number, press N.
To see call details (like time and date), press s.
To see menu options, press Menu (right softkey)
from the Call History screen. This menu includes:
ࡗ Find Contact – Find this device number in your Contacts.
ࡗ Send Text Message – Send a text message to this phone number.
ࡗ E-mail – Send an email message to this Contact. ࡗ View Timers – View the call times for this call and all calls.
ࡗ Delete/Delete List – Delete this call from the Call History.
ࡗ Save to Contacts – Save this number to a Contact. ࡗ Filter – Filter all calls in the Call History list. Filtering calls allows you to quickly find a call
within a specific group. For example, if you filter
the list for Missed Calls, only the incoming phone
calls you did not answer will be listed.
Section 2D: Using Calling Features
49
Viewing Missed Calls
Your device keeps a record of your unanswered calls.
1. Press Start (left softkey) and select Call History.
2. Press Menu (right softkey).
3. Select Filter.
4. Select Missed Calls.
Tracking Call Times and Costs
Your device keeps an approximate record of your call times
and costs by tracking your network connect time.
Network connection time is the elapsed time from the
moment you attempt to connect a call to the moment you
end the call by pressing O. This time includes busy signals
and ringing.
The amount of network connection time you track on your
resettable timer may not equal the amount of time for
which you are billed by Sprint. For billing information,
contact Sprint.
IMPORTANT
To view call times:
1. Press Start (left softkey) and select Call History.
2. Press Menu (right softkey).
3. Select View Timers.
You can also check your minutes by dialing *4 and
pressing N. Dial *3 and press N for additional billing
options.
Tip:
To reset all call timers to zero, except for the Lifetime calls timer:
1. Press Start (left softkey) and select Call History.
2. Press Menu (right softkey) and select View Timers.
50
Section 2D: Using Calling Features
3. Press Menu (right softkey) and select Reset Timers.
Using Speed Dial
You can use speed dialing in two ways:
ⅷ
Quick access for up to 98 phone numbers.
ⅷ
Shortcuts to features found in the Start menu including
email, calendar, and Bluetooth Manager.
To access speed dial entries, press and hold the single-digit
speed dial number for one second. If the speed dial is two
digits, press the first digit, then press and hold the second
digit. The device dials the phone number, opens a new email
message, or goes to the Web page.
Speed dial 1 is reserved for calling your voicemail.
Note:
Phone Numbers
You can set the speed dial to call the entries in your
contacts list.
To add a speed dial entry from your contacts list:
1. Press Contacts (right softkey).
— or —
Press Start (left softkey) and select Contacts.
2. Highlight the contact containing the number you want
to create a speed dial for.
3. Press s to display the contact’s details.
4. Highlight the phone number, email address, or Web
page for which to create the speed dial.
5. Press Menu (right softkey) and select Add to Speed Dial.
Section 2D: Using Calling Features
51
6. In the Keypad assignment field, select the speed dial
number to use.
7. Press Done (left softkey) to save your settings.
Menu Shortcuts
You can set a shortcut speed dial to open an application on
your device.
1. Press Start (left softkey).
2. Scroll to the icon of the application for which you want a
shortcut.
3. Press Menu (right softkey) and select Add Speed Dial.
4. In the Keypad assignment area, select the speed dial
number to use.
5. Press Done.
Deleting Speed Dial Entries
1. Press Start (left softkey) and select Speed Dial.
3. Press Menu (right softkey) and select Delete.
4. Press Yes (left softkey) to confirm.
52
Section 2D: Using Calling Features
Redialing a Number
To redial a number you recently called:
1. Press N from the Home screen to see the dialed calls
list.
2. Highlight the entry you want to call, then press N
again.
If you hear a busy signal and you see Call Failed, Number Busy,
press N to redial the number. When the call goes through,
your device rings or vibrates one time, displays Redial
Successful, and connects the call.
Section 2D: Using Calling Features
53
Section 2E
Entering Text
In This Section
ࡗ ࡗ Entering Letters, Numbers, and Symbols
Using the Input Method Editor
Your device has a full QWERTY keyboard, much like your
computer keyboard, to make entering text easy. This section
tells you how to use the keyboard to enter letters numbers,
and symbols, and how use your device’s predictive text
feature.
54
Section 2E: Entering Text
Entering Letters, Numbers, and Symbols
You can enter letters, numbers, and symbols using the
keypad. Your device gives you three text entry modes to help
you, depending on what type of characters you want to enter.
In many screens that allow you to enter text, your device
automatically goes to the text entry mode most appropriate
to the kind of characters usually entered in the field you are
entering text in. Press the Alt/Function key (\) to change a
text entry mode.
Text Entry Mode Status Indicators
The status indicator at the top right of the display screen
shows the entry mode you are currently using:
ⅷ
Primary key entry (i) – In this mode, pressing a key
causes the character at the bottom of the key to appear.
Ⅲ
Lowercase (the primary entry mode icon appears as
“abc”) – Pressing a key enters the lowercase letter
shown on the key.
Ⅲ
Caps (the primary entry mode icon appears as
“Abc ”) – Press the Caps key (Â) once to switch to this
mode. The next letter you type will be capitalized.
After that, letters you type will be lowercase.
Ⅲ
Caps lock (the primary entry mode icon appears as
“ABC”) – Press the Caps key (Â) twice to switch to
this mode. Letters you type will be capitalized until
you press the Caps key (Â) again.
Section 2E: Entering Text
55
ⅷ
Secondary key entry (Ã) – In this mode, pressing a key
causes the character at the top of the key to appear.
Ⅲ
Secondary key (the secondary entry mode icon
appears as “Alt”) — Press the Alt/Function key (\)
once from primary entry key mode to switch to this
mode. The next key you press enters the character
at the top of the key. After that, the device returns to
primary entry key mode.
Ⅲ
Secondary key lock (the secondary entry mode icon
appears as “ALT”) — Press the Alt/Function key (\)
twice from primary entry key mode to switch to this
mode. Keys you press enter the character at the top
of the key until you press Alt/Function key (\)
again.
Text Entry Tips
When you are entering text, these tips will help you:
ⅷ
To delete one character, press the Back key (À).
ⅷ
the Back key (À).
ⅷ
To choose from a list of international and mathematical
symbols that do not appear on your keypad, press the
Alt/Function key (\) and then the Caps key (Â).
56
Section 2E: Entering Text
Using the Input Method Editor
The Input Method Editor combines your key presses into
common words, and predicts each word as you enter it.
When the word you want appears, select it from the pop-up
list by pressing the Navigation key (S) up or down to
highlight it and then press the Center Select key (s) to insert
the highlighted word in your message. If you want a different
word that does not appear on the pop-up list, continue
pressing keypad keys to enter the remaining characters until
it appears. To dismiss the suggestions for a particular word
you typed and continue with what you've completed, press
the space key or the right navigation key.
To turn Input Method Editor off or on:
1. Press Start (left softkey).
2. Select Settings > Text Input Settings.
3. Select the Suggest words when typing checkbox to toggle
Input Method Editor on or off.
Section 2E: Entering Text
57
Section 2F
Synchronizing and Using Email
In This Section
ࡗ ࡗ Synchronizing
Using Email
You can synchronize information on your device over the air or
while connected to your computer. Among other benefits, this
feature allows you to access your email accounts from your
device. This section describes the types of synchronization
available, tells you how to use them, and tells you how to use
the email feature available on your device.
Before You Synchronize
IMPORTANT
Read and follow the instructions in the Setting Up Email
guide to set up your email accounts on your device and set
your synchronization options before attempting to use
email, synchronize information, or set up your device to
synchronize using a computer as described in this section.
58
Section 2F: Synchronizing and Using Email
Synchronizing
You can synchronize the information on your device in two
ways:
ⅷ
Over the air, wirelessly, from a server.
ⅷ
Using your desktop computer and a USB cable connection
or Bluetooth connection.
The types of information you can synchronize depend on the
type of connection you are making:
ⅷ
If you are synchronizing over the air directly to your
company’s Microsoft Exchange Server using the
ActiveSync program on your device, you can synchronize
email, contacts, calendar, and tasks.
ⅷ
If you are synchronizing over the air to your company’s
server using Good Mobile Messaging, you can
synchronize email, contacts, calendar, tasks, and notes.
ⅷ
ⅷ
If you are synchronizing over the air to your ISP or Web-
based personal email account, you can synchronize email.
If you are synchronizing using your computer and a USB
cable or Bluetooth connection, you can synchronize email,
contacts, calendar, and media. To do this, you must install,
to your computer, the Microsoft Windows Mobile Device
Center (for Vista) or Microsoft ActiveSync 4.5 or later (for
Windows XP and prior Windows operating systems) from
the Getting Started CD that came with your device.
If you are synchronizing with a cable, you must use Microsoft
Outlook 2003 or later. You cannot respond to email while the
USB cable is disconnected.
Section 2F: Synchronizing and Using Email
59
Synchronizing Over the Air
You can use your device to synchronize email and other
information over the air. To learn how to do this, see the
Setting Up Email guide that came with your device. This guide
helps you determine which over-the-air email set-up you
want to use on your device, tells you how to set up email on
your device, and how to synchronize over the air.
Use the instructions in the Setting Up Email guide to set up
your email accounts on your device and set your
synchronization options before attempting to use email,
synchronize information, or set up your device to synchronize
using a computer.
Synchronizing Using a Computer
If you want to synchronize information over the air directly
to your company’s Microsoft Exchange Server, follow the
instructions for setting up an Exchange Server account in
in this section.
Note:
Ensure that the Microsoft Windows and Microsoft
Outlook versions are up to date before installing
synchronization software.
To synchronize information between your device and
computer, you can use Microsoft Windows Mobile Device
Center or Microsoft ActiveSync. Microsoft ActiveSync and
Windows Mobile Device Center are on the Getting Started CD
included with your device. When you insert the CD into your
computer, it automatically determines which application you
should use.
60
Section 2F: Synchronizing and Using Email
These applications compare your device’s email messages,
contact information, calendar appointments, and media files
to those on your computer and then update to the most
recent information.
You can also use Windows Media Player version 10 or later to
synchronize your media files (see “Using the Media Player” on
page 96).
Using Mobile® Device Center on Windows Vista™
Microsoft Windows Mobile Device Center is the replacement
for Microsoft ActiveSync on Windows Vista.
Some versions of Windows Vista come with Windows Mobile
Device Center already installed. If Windows Mobile Device
Center is not available on your Windows Vista computer, you
can install it from the CD that came with your phone.
To set up synchronization in Windows Mobile Device Center:
1. Connect your phone to your computer. Windows Mobile
Device Center configures itself and then opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center's Home screen,
click Set up your device.
Choose Connect without setting up your device if you only
want to transfer media files, check for updates, and explore
your phone but not sync Outlook information.
Note:
4. Select the items you want to synchronize then click Next.
5. Enter a device name for your phone and click Set Up.
When you finish the wizard, Windows Mobile Device Center
synchronizes your phone automatically. Outlook email
messages and other information appear on your device after
synchronization.
Section 2F: Synchronizing and Using Email
61
Installing and Setting Up ActiveSync
To synchronize information on your device with a
non-Windows Vista computer, you must install Microsoft
ActiveSync software on your computer.
Verify the minimum requirements for your computer and
the operating system at the Microsoft Mobile Phone Web
installing the software.
Caution:
To install ActiveSync on your computer:
1. Insert the CD that came with your device into your
computer.
2. When the main screen appears, click Applications.
3. In the Applications screen, click on the area indicated to
install ActiveSync.
4. Follow the prompts to install ActiveSync.
To complete the ActiveSync set up:
1. After setup completes, connect your device to your
computer using the mini-USB cable. The device drivers
install on your computer and then the Sync Setup
Wizard automatically starts.
2. Follow the prompts to complete the Sync Setup Wizard.
You can configure an Exchange Server connection to
synchronize directly with Exchange Server and Outlook
email clients. The Sync Setup Wizard may prompt you for
the name of the Exchange Server, your user name,
password, and domain name. This is the same information
you should have already used when setting up an Exchange
Server account using the ActiveSync program on your
device, as described in the Setting Up Email guide that came
with your device.
Note:
62
Section 2F: Synchronizing and Using Email
3. When you finish the Sync Setup Wizard, ActiveSync
starts to synchronize automatically with your device.
After synchronization completes, you can disconnect
your device from your computer.
You may need to restart your computer.
Note:
Note:
For more information, see “Connecting a mobile device to a
PC” in ActiveSync Help on your computer (open the
ActiveSync program and use the Help menu) or the
Microsoft Web site for ActiveSync or the Motorola Q 9c
You can also contact the Motorola Customer Support
Center at
1-800-657-7576 (United States and Canada) or
1-888-390-6456 (TTY/TDD United States for hearing
impaired).
Synchronizing Using a USB Cable
After ActiveSync or Mobile Device Center is installed on your
computer, you can synchronize by connecting your device and
computer using the supplied USB cable.
To synchronize via a cable connection:
1. Turn on the device.
2. Connect your device to your computer using the
supplied USB cable.
Section 2F: Synchronizing and Using Email
63
Synchronizing Via Bluetooth
After ActiveSync or Windows Mobile Device Center is
installed on your computer, you can synchronize by using a
wireless Bluetooth connection between your device and your
computer.
To use this feature, your computer must be equipped with
Bluetooth or a Bluetooth computer adaptor accessory.
Note:
To synchronize via Bluetooth:
1. Follow the instructions in ActiveSync Help for
configuring Bluetooth on your computer to support
ActiveSync.
2. Turn on the device.
3. On your device, verify that Bluetooth is turned on:
Ⅲ
Press Start (left softkey) and select Bluetooth >
Bluetooth Manager > Settings.
Ⅲ
Toggle Status to Bluetooth ON.
4. Return to the Home screen.
5. Press Start (left softkey) and select ActiveSync.
6. Select Menu > Connect via Bluetooth. Ensure that the
device and computer are within close range.
7. If this is the first time you have connected to this
computer via Bluetooth, you must complete the
Bluetooth wizard on the device and set up a Bluetooth
partnership with the computer before synchronizing.
8. Select Sync.
9. When finished, select Menu > Disconnect Bluetooth.
10. To preserve battery power on your device, turn off
Bluetooth (see page 109).
64
Section 2F: Synchronizing and Using Email
Using Email
Before you begin using email on your device, you must set up
the email accounts you want to use. To learn how to set up
email on your device, see the Setting Up Email guide that
came with your device.
Receiving and Reading Messages
When you receive an email message, you can read it right
away or go to your email message list to read it.
Reading New Messages
When you receive a message your device plays an alert and
displays a message indicator such as C.
To view a new email message:
ᮣ
Press Read.
— or —
ᮣ
Select the message notification area on the Home
screen.
Going to Your Email Messages
To go to your email messages:
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select the email account you want to read messages
from. In most cases, this brings you to the Inbox of the
account you selected.
If you do not see a list of messages, press Menu (right
softkey) and select Folders > Inbox.
Tip:
Section 2F: Synchronizing and Using Email
65
To read a message:
ᮣ
Select a message in the list.
To open the next message in the list from within an open message:
ᮣ
Press the navigation key S to the right.
To open the previous message in the list from within an open
message:
ᮣ
Press the navigation key S to the left.
Need to check your email right now? Go to the email
account you want to check. Press Menu (right softkey) and
select Send/Receive. The device connects to your Internet
email server and sends and receives your messages. To stop
this process, press Menu (right softkey) and select
Stop Send/Receive.
Tip:
Basic Message Options
From the Inbox of each of your email accounts, when you
have a message selected or are viewing a message, you can
use the following steps to delete, save, reply to, or forward
the message. You can also create a contact card for the
sender, which is saved in your contacts list.
To delete a message:
1. From the email account’s Inbox, highlight or view the
message you want to delete.
2. Select Delete (left softkey).
66
Section 2F: Synchronizing and Using Email
To reply to a message:
1. From the email account’s Inbox, highlight or view the
message you want to reply to and press Menu (right
softkey) and select Reply.
2. To reply only to the sender, select Reply.
— or —
To reply to the sender and all recipients, select Reply All.
3. Enter your reply.
4. Press Send (left softkey).
If you are replying to an email in the Outlook email account,
you will send less data if you do not edit the original
message. This may reduce data transfer costs based on your
rate plan.
Tip:
To forward a message:
1. From the email account’s Inbox, highlight or view the
message you want to forward and press Menu (right
softkey) and select Reply.
2. Press Forward.
3. In the To field, enter the email address or email
addresses you want to send the message to. Insert a
semicolon (;) between multiple numbers or addresses.
4. Press Send (left softkey).
To save the sender’s contact information:
1. From the email account’s Inbox, view the message you
want to create a contact card for.
2. Highlight the sender’s name and press s.
3. Press Save (left softkey) and select New Contacts.
4. Press Save (left softkey).
Section 2F: Synchronizing and Using Email
67
Downloading Complete Email Messages
1. From the email account’s Inbox, highlight or view the
message you want to download.
2. Press Menu (right softkey) and select Download Message.
The complete message is retrieved the next time you
synchronize or connect to your email server and send and
receive email.
Viewing and Downloading Attachments
If you receive a message with attachments, you can
download and view the attachments.
1. Open the message and scroll to the attachment you
want to open.
2. With the attachment you want to open highlighted,
press s to begin downloading the attachment.
3. After the “Downloading” status bar disappears and the
attachment's icon appears, press s.
attachment. To save the attachment to a particular
directory or to cancel the operation, press Menu (right
softkey) and select the desired action.
You can view attachments only for file types that are
supported by the device, including PDF, Microsoft Word,
Excel, and PowerPoint files. These and other supported
types are displayed using the device's Documents to Go
application.
Note:
68
Section 2F: Synchronizing and Using Email
Sending a Message
The email messages you create and send can contain
pictures, animations, sounds, videos, PDFs, compressed files,
word processing, presentations, and spreadsheet files.
To send an email message:
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select the account you want to access.
3. In the Inbox, press Menu (right softkey) and select New.
4. In the To field, enter the email address you want to send
the message to. Insert a semicolon (;) between multiple
addresses.
To add email addresses to Cc and Bcc fields, scroll up from
the To field.
Note:
Tip:
You can quickly enter email addresses from your contacts. In
the To field, press Enter (Á) and select a recipient from the
list. Then select the recipient's phone number or email
address.
5. Scroll to the body of the message. Use the keypad to
compose a message.
To insert a picture, voice note, or file: Press Menu (right
softkey) and select Insert. Then select Picture, Voice Note,
or File.
Note:
If you choose to insert a voice note into the message, you
will also need to record it. Press Record and start speaking
into the device's microphone. When you have finished
speaking, press Stop and then press Done.
Section 2F: Synchronizing and Using Email
69
6. Press Send (left softkey).
To set the priority for a message:
1. Before sending the message, press Menu (right softkey).
2. Select Message Options.
3. Press the Navigation key (S) right or left to select a
priority, and then press Done (left softkey)
To cancel a message:
1. Before sending the message, press Menu (right softkey).
2. Select Cancel Message.
To save a message as a draft:
1. Before sending the message, press Menu (right softkey).
2. Select Save to Drafts.
A draft of the message is stored in the Drafts folder of the
account you are in.
Creating and Adding an Email Signature
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Go to the Inbox of the email account you want to create
a signature for.
3. Press Menu (right softkey) and select Tools > Options >
Signatures.
4. Select the Use signature with the account checkbox.
5. If you want the signature to be added to every message
you send, select Include when replying and forwarding.
Otherwise, a signature is inserted only in new
messages.
6. Select the Signature field.
7. Enter your signature.
70
Section 2F: Synchronizing and Using Email
8. Press Done (left softkey).
9. Press Done (left softkey).
Using Company Directory Address Look Up
You can view Company Directory on the Exchange Server
from your device. This means you can find a contact’s phone
number or email without having to store the information
directly to your device.
Company Directory information can only be viewed during
a data transfer session; the entire Company Directory
cannot be stored for viewing offline.
Note:
Company Directory can be found from Contacts and Contact
Chooser. Contact Chooser is found in Messaging, Phone,
Calendar, and Speed Dial.
To use Company Directory to find an email address to send a
message to:
(right softkey).
2. Select Add Recipient.
3. Press Menu (right softkey) and select Company Directory.
4. Enter the name of the person you would like to find.
Press Search (left softkey) to display the search results.
5. When you locate the contact, highlight and select it. The
email information is populated into the To Field.
Use can also use Company Directory to search for a contact
and make a call: Press Start (left softkey). Select Contacts. In
the contacts list, press Menu. Select Company Directory. Scroll
through the list of entries displayed. When you locate your
contact, press N to make a call.
Tip:
Section 2F: Synchronizing and Using Email
71
Although the entire Company Directory cannot be stored on
your device, after the contact is found, you can add the
single contact to your list.
Note:
Managing Your Email Folders
To manage your email accounts, you can mark folders as
synchronized, move messages from one folder to another,
empty the deleted items folder, and delete email accounts.
Marking Folders for Synchronization
When you synchronize your Outlook email account with your
computer, the same Inbox folders that are in Outlook on your
computer are created on your device. You cannot synchronize
your computer's Personal or Archive Folders with your mobile
device, only folders in your account's Mailbox.
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select Outlook Email.
3. Press Menu (right softkey).
4. Select Folders.
5. Press Menu (right softkey) and select Show all Folders.
6. Press Menu (right softkey) and select Manage Folders.
7. Highlight each folder you want to synchronize and press
Sync (right softkey).
8. After all folders you want to synchronize have been
selected, press Done (left softkey).
The Manage Folders screen is displayed and the folders
marked will be synchronized during the next synchronizing
session.
72
Section 2F: Synchronizing and Using Email
Make sure to mark your email sent folder for
synchronization, or you won’t be able to view sent message
status.
Note:
Moving an Email Message to Another Folder
You can move an email message from the Inbox or any other
folder to another folder within the same email account.
1. Highlight or view the message you want to move.
2. Press Menu (right softkey) and select Move.
3. Highlight the folder you want to move the message to,
and press Select (left softkey) or press s.
Emptying the Deleted Items Folder
You can empty the deleted items folder for any of the email
accounts on your device. This frees up space in your device’s
memory.
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select the email account that you want to empty the
deleted items folder of.
3. Press Menu (right softkey) and select Folders.
4. Highlight the deleted items folder.
5. Press Menu (right softkey) and select Delete All.
Section 2F: Synchronizing and Using Email
73
Deleting an Email Account
If you do not want an account on your device anymore, you
can delete it.
You cannot delete your Outlook email account or your text
message folder.
Note:
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Highlight the account that you want to delete.
3. Press Menu (right softkey) and select Delete to delete
the account.
4. Press Yes (left softkey) to confirm.
74
Section 2F: Synchronizing and Using Email
Section 2G
Customizing Your Device
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Controlling Your Roaming Experience
Using Profiles
Using Settings
Using Personalize My Q
Setting Flight Mode
Setting Audio Enhancement
Using the available menu options, you can customize your device
to sound, look, and operate just the way you want it. This section
describes how you can change your device’s settings to best
suit your needs. Take a few moments to review these options
and to adjust or add settings that are right for you.
Section 2G: Customizing Your Device
75
Controlling Your Roaming Experience
Understanding Roaming
Roaming is the ability to make or receive calls and transmit or
receive data when you’re off the Sprint National Network.
Your new MOTO Q 9c by Motorola works anywhere on the
Sprint National Network and allows you to roam on other
networks where we’ve implemented roaming agreements
with other carriers.
Recognizing the Roaming Icon
Your device’s display screen always lets you know when
you’re off the Sprint National Network. Any time you are
roaming, the device displays the roaming icon (ã).
Remember, when you are using your device off the Sprint
National Network, always dial numbers using 11 digits (1 +
area code + number).
Tip:
Roaming on Other Digital Networks
When you’re roaming on digital networks, your call quality
and security will be similar to the quality you receive when
making calls on the Sprint National Network.
However, depending on the network available where you are
roaming, certain features may not be available.
If you’re on a call when you leave the Sprint National
Network, your call is dropped. If your call is dropped in an area
where you think Sprint service is available, turn your device
off and on again to reconnect to the network. You will be
charged roaming rates when accessing voicemail while
roaming off the network.
Note:
76
Section 2G: Customizing Your Device
Checking for Voicemail Messages While Roaming
When you are roaming off the Sprint National Network, you
may not receive on-device notification of new voicemail
messages. Callers can still leave messages, but you will need
to periodically check your voicemail for new messages if you
are in a roaming service area for an extended period of time.
To check your voicemail while roaming:
1. Dial 1 + area code + your phone number.
2. When you hear your voicemail greeting, press *.
3. Enter your passcode at the prompt and follow the voice
prompts.
When you return to the network, voicemail notification will
resume as normal.
Setting Your Device’s Roam Mode
Your device allows you to control your roaming capabilities.
1. Press Start (left softkey).
2. Select Settings > Phone Settings > Network.
Ⅲ
In the Network Selection field, use the
Navigation key (S) to select your roaming mode:
ࡗ Sprint Only allows you to access the Nationwide Sprint PCS Network only and prevents roaming
on other networks.
ࡗ Automatic seeks Sprint service. When Sprint service is unavailable, the device searches for an
alternate system. This is the default setting.
ࡗ Roam Only forces the device to seek a roaming system.
3. Press Done (left softkey) to save the changes.
Section 2G: Customizing Your Device
77
Using Profiles
Profiles set your device to use different sounds, ring styles
and volume, earpiece volume, or vibrations for incoming calls
and events. For example, the Outdoor profile volume is much
louder than the Normal profile.
These are the profiles you can choose:
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Normal
Silent
Vibrate
Outdoor
Automatic
Do you want your device to vibrate instead of ring while
your Outlook calendar shows you are in a meeting? Use the
Tip:
Automatic profile.
If there is a status indicator associated with the profile and
you have not set Windows Simple or Large Font as your Home
screen layout, the ring style profile’s indicator displays at the
top of your Home screen.
To choose your profile:
1. On the Home screen, highlight the profile area and
select it.
2. Select the profile you want.
You cannot change to speakerphone mode from the Profiles
menu. You change to it by pressing the Speakerphone/Voice
Recognition key (A) while in a call.
Note:
78
Section 2G: Customizing Your Device
Viewing and Changing Profile Details
You can view the details of a profile to see exactly how your
device will behave when the profile is selected.
You can also change these details and save them to a profile.
Your changes will go into affect the next time you select the
profile. To change back, simply reset the profile to its default
settings.
To view the details of a profile:
1. On the Home screen, highlight the profile area and
select it.
2. Scroll and highlight the profile whose details you want
to view.
3. Press Menu (right softkey) and select Edit.
To change the details of a profile:
1. While viewing the details of a profile, scroll and
highlight the option you want to change, then press the
Navigation key (S) right or left to change it.
2. Press Done (left softkey) to save the changes.
To set the details of a profile back to their defaults:
1. On the Home screen, highlight the profile area and
select it.
2. Scroll and highlight the profile whose details you want
to reset.
3. Press Menu (right softkey) and select Reset to default.
Section 2G: Customizing Your Device
79
Using Settings
The Settings menu lets you customize many aspects of your
device. This section describes a few you may want to use right
away.
Customizing the Home Screen
You can set a photo, picture, or animation as a wallpaper
(background) image or change your layout and color scheme
on the Home screen.
1. Press Start (left softkey).
2. Select Settings > Home Screen.
3. Scroll and highlight the option you want to change,
then press the Navigation key (S) right or left to change
it. The following options are available:
Ⅲ
Home screen layout – Select a layout for the Home
screen.
Ⅲ
Ⅲ
Background image – Select a picture for your
wallpaper image, or None for no wallpaper.
Ⅲ
Time out – Select the time interval before the display
will go inactive. Select Never to set the display to
always remain active.
4. Press Done (left softkey) to save the changes.
GIF, JPG, and BMP files that you place in the My Pictures
folder on your device can be set as your wallpaper.
Tip:
80
Section 2G: Customizing Your Device
Setting Power Management Options
To save battery life, your backlight and display turn off when
you’re not using your device. The backlight and display turn
back on when you press a key.
You can set how long your device waits before the backlight
or display turns off, known as timing out.
To set the backlight and display time-out times:
1. Press Start (left softkey).
2. Select Settings > Power Management.
3. To set the backlight time:
Ⅲ
In the Backlight time out on battery field, use the
Navigation key (S) to select the amount of time.
Ⅲ
In the Backlight time out on AC field, use the
Navigation key (S) to select the amount of time.
4. To set the display time: In the Display time out field, use
the Navigation key (S) to select the amount of time.
5. Press Done (left softkey) to save the changes.
Using Custom Sounds
You can change the default sounds for ring tone, reminders,
new messages, alarm clock, or keypad controls.
To assign sounds:
1. Press Start (left softkey).
2. Select Settings > Sounds.
3. Scroll and highlight the sound you want to change, then
press the Navigation key (S) right or left to change it.
4. Press Done (left softkey) to save the changes.
Section 2G: Customizing Your Device
81
Changes made to the sound settings will have no effect
when using the Silent profile.
Note:
Assigning Downloaded Ring Tones as Sounds
If you download a file for a ring tone, it does not
automatically go to the Sounds folder, where it can be
assigned as a ring tone.
To place your sound file in the Sounds folder:
1. Press Start (left softkey).
2. Select File Manager > My Documents. If the file you want
is not in My Documents, select the folder it is in.
3. Highlight the file you want to copy to the Sounds folder.
4. Press Menu (right softkey) and select File > Copy to.
5. Select Application Data > Sounds.
Adjusting Time and Date
Sprint automatically sets the time and date for you; however,
you must manually set your time zone.
You can also change the time and date style.
To adjust your time zone settings:
1. Press Start (left softkey).Select Settings > Clock & Alarm
> Date and Time.
2. In the Time Zone field, use the Navigation key (S) to
select your time zone.
3. Press Done (left softkey) to save the changes.
82
Section 2G: Customizing Your Device
To change the time and date style:
1. Press Start (left softkey).
2. Select Settings > Regional Settings.
3. Scroll and highlight the time and date format fields,
then press the Navigation key (S) right or left to change
your time and date formats.
4. Press Done (left softkey) to save the changes.
Changing the Display Language
You can change the language that displays in your device’s
screens and menus.
1. Press Start (left softkey).
2. Select Settings > Regional Settings.
3. In the Language field, use the Navigation key (S) to
select your language.
4. Press Done (left softkey) to save the setting.
You must turn your device off and on again for the change to
take effect.
Setting Your Device for TTY Calls
You can set your device to make and receive calls using a TTY
(teletypewriter) device.
TTY does not work from mobile phone to mobile phone.
Your MOTO Q 9c device is a mobile phone.
Note:
1. Press Start (left softkey).
2. Select Settings > TTY Settings.
3. Press the Navigation key (S) right or left to choose your
TTY setting.
4. Press Done (left softkey) to save the setting.
Section 2G: Customizing Your Device
83
Using Accessibility Settings
You can set system font size, multi-press time-out,
confirmation time-out, and in-call alerts:
To set accessibility settings:
1. Press Start (left softkey).
2. Select Settings > Accessibility.
3. Scroll and highlight the option you want to change,
then press the Navigation key (S) right or left to
change it.
4. Press Done (left softkey) to save the changes.
Entering Owner Information
Entering and displaying owner information are best
practices; they allow someone to return the device to you in
case it is lost.
1. Press Start (left softkey).
2. Select Settings > Owner Information.
3. Enter your information.
4. Press Done (left softkey) to save the information.
Using Personalize My Q
Personalize My Q allows you to change the Home screen, the
Start menu, and the sounds made by your device. Personalize
My Q is the only feature in your device that gives you a way to
choose the shortcuts and right softkey option that appears on
your Home screen.
84
Section 2G: Customizing Your Device
Changing the Home Screen Shortcuts and Right
Softkey Option
You can make your device more convenient for you by
choosing the shortcuts that appear as the Home screen or
choosing the application that appears as the right softkey
option.
To change the Home screen shortcuts:
1. Press Start (left softkey).
2. Select Personalize My Q > Home Screen Shortcuts.
3. Check Show User Defined Shortcuts.
4. Select Define Shortcuts.
5. Check the applications you want to choose as Home
screen shortcuts.
6. When you are finished, press Done (left softkey).
To change the Home screen right softkey option:
1. Press Start (left softkey).
2. Select Personalize My Q > Home Screen Right Soft Key.
3. Select Menu.
4. From the menu that appears, choose the option you
want to appears as the right softkey option on the
Home screen. You can choose items from the Start
menu, Favorites, or other applications.
5. Press Done (left softkey).
Section 2G: Customizing Your Device
85
Setting Flight Mode
You can put your device in flight mode to safely access your
address book, games, camera, and music in areas where
cellular network access is prohibited (for example, during
airline flights and in hospitals).
1. Press and hold the Home key (X). The Quick List
displays.
2. Highlight and select Wireless Manager.
3. Scroll to Phone and press s. When Phone is on, flight
mode is off. When Phone is off, flight mode is on.
Setting Audio Enhancement
Your device allows you to adjust surround sound, bass, and
clarity levels for the device speakers as well as your headset.
To set audio enhancements:
1. Press Start (left softkey).
2. Select Accessories > Audio Enhancement.
3. Highlight Phone Speaker or Headset.
4. Press Menu (right softkey) and select Edit.
5. Scroll and highlight the option you want to change,
then press the Navigation key (S) right or left to
change it.
6. Press Done (left softkey) to save the changes.
7. When you are finished setting audio enhancement for
the device’s speaker and headset, press Done (left
softkey) again.
86
Section 2G: Customizing Your Device
Section 2H
Using the Built-in Camera
In This Section
ࡗ ࡗ ࡗ Taking Pictures
Shooting Videos
Setting Picture Options
Your device’s built-in camera and camcorder give you the ability
to take full-color digital pictures and videos. You can use your
device to share your pictures and videos with others. It’s fun
and easy to do.
This section explains the features and options of your
device’s built-in camera and camcorder.
Section 2H: Using the Built-in Camera
87
Taking Pictures
Taking pictures with your device’s built-in camera is as simple
as choosing a subject, pointing the lens, and pressing a
button.
To take a picture:
1. Press the Camera (e) key to see the camera viewfinder:
Pictures & Videos
IMAGE
AREA
877 1.0x
Thumbnails
Menu
To adjust picture settings (Mode, Brightness, Resolution,
Zoom, White Balance, and Flash) in the camera viewfinder,
press Menu (right softkey).
Tip:
3. Press the Camera (e) key again or press s to take a
photo. The picture is automatically saved, and it is
displayed in the viewfinder.
88
Section 2H: Using the Built-in Camera
4. Press Menu (right softkey) to see the camera options:
Ⅲ
To delete the photo, select Delete.
Ⅲ
To send the photo, select Send.... Your send options
are Outlook E-mail or another formatted email
account.
Ⅲ
Ⅲ
To send via Bluetooth, select Send via Bluetooth.
To use the picture as the Home screen, select Use as
Home Screen.
Ⅲ
Ⅲ
To edit the picture, select Edit.
To view image properties, like the filename, select
Properties.
Ⅲ
To view picture options, select Options.
To return to camera mode, press Camera (left softkey).
Tip:
Taking a Self-Portrait
Taking a self-portrait is easy using the timer feature.
To take a self-portrait:
1. Press the Camera (e) key to see the camera viewfinder.
2. If the softkey options are not visible, press either softkey
to see them.
3. Press Menu (right softkey) and select Mode > Timer.
4. Press the Camera (e) key or press s to start the
five second delay.
5. Aim the camera lens at yourself.
6. When you hear the camera shutter sound, the photo is
taken, and your photo displays.
Section 2H: Using the Built-in Camera
89
Viewing Stored Pictures
Pictures are automatically stored in your device, unless you
use picture options to set your device to store pictures to the
miniSD card inserted in your device.
For information on how to change the default location
for stored pictures, see “Setting Picture Options” on page
94.
Tip:
To view pictures stored to the default location in your device:
1. Press Start (left softkey).
2. Select Pictures & Videos.
3. Select the picture to view
4. Press View (left softkey).
To view pictures located in a folder other than the default pictures
folder, including a miniSD card:
1. Press Start (left softkey).
2. Select Pictures & Videos.
3. Press Menu (right softkey) and select Folders.
4. Select the folder that contains stored pictures. To select
a folder in your device’s memory other than the My
Pictures folder, select My Device and then choose the
appropriate folder from the screen.
5. Select the picture you wish to view.
6. Press View (left softkey).
90
Section 2H: Using the Built-in Camera
Shooting Videos
Your device’s built-in video camera allows you to record and
view full-color digital videos and send them to your friends
and family.
To record a video clip:
1. Press the Camera (e) key to see the camera viewfinder.
2. If the softkey options are not visible, press either softkey
to see them.
3. Press Menu (right softkey) and select Video to go to the
camcorder.
4. Point the camera lens at the video subject.
To adjust video settings (Still, Brightness, Quality, and
White Balance) in the camera viewfinder, press Menu
(right softkey).
Tip:
5. Press the Camera (e) key or s to begin recording a
video. The video displays in the viewfinder.
Pictures &Videos
VIDEO
AREA
00:05
Stop
43:20
Pause
Current recording length
Remaining recording time
6. Press Stop (left softkey) to end recording the video
altogether, or press Pause (right softkey) to pause
Section 2H: Using the Built-in Camera
91
The number on the left side of the screen is the current
length of the video clip you are recording. The number on
the right indicates the remaining recording time.
Tip:
recording and Resume (right softkey) to continue
recording.
Playing Video Clips
Video clips are automatically stored in your device, unless you
use picture options to set your device to store video clips to
the miniSD card inserted in your device.
To play video clips stored to the default location in your device:
1. Press Start (left softkey).
2. Select Pictures & Videos.
3. Select the video clip to play.
4. Press Play (left softkey).
To play video clips located in a folder other than the default video
folder, including a miniSD card:
1. Press Start (left softkey).
2. Select Pictures & Videos.
3. Press Menu (right softkey) and select Folders. To select a
folder in your device’s memory other than the My
Pictures folder, select My Device and then choose the
appropriate folder from the screen.
4. Select the folder that contains stored videos.
5. Select the video clip to play.
6. Press Play (left softkey).
When you press Play (left softkey), the video clip displays in
the Windows Media screen.
92
Section 2H: Using the Built-in Camera
For more video playback and Windows Media features, see
“Using the Media Player” on page 96.
To play video in full screen, press Menu and select
Full Screen. Only videos that were recorded with the
correct resolution will play in full-screen mode.
Tip:
If a call comes in while watching a video, the video pauses
and a call alert appears. You can choose to answer the call or
ignore it. To continue watching the video, press the Play
button.
Setting Video Playback Options
Video options allow you to choose certain default settings for
playing video clips on your device.
To access the video playback options menu:
ᮣ
With the Window Media player open, press Menu
(right softkey) and select Options.
The following options are available:
ⅷ
Playback – Determines how the time counter is displayed,
whether to pause playback while using another program,
and whether to resume playback after a device call.
ⅷ
ⅷ
ⅷ
Video – Options for displaying in full screen and when to
scale to fit the window.
Network – Selects default network settings for streaming
media.
Library – Determines if the player starts on the Library
screen.
ⅷ
ⅷ
Skins – Determines Windows Media Player skin theme.
Buttons – Set playback button mapping.
Section 2H: Using the Built-in Camera
93
Setting Picture Options
Picture options allow you to choose certain default settings
for the pictures and videos you take with your device.
To access the picture options menu:
1. Press the Camera (e) key to see the camera viewfinder.
2. Press Menu (right softkey) and select Options....
The following options are available:
ⅷ
General – Determine default picture sizes for email and
rotate picture settings.
ⅷ
ⅷ
Slide Show – Select default slide show settings.
Camera – Select default locations to store pictures,
filename prefixes, and image compression.
ⅷ
Video – Determine audio settings and time limits for
video files.
94
Section 2H: Using the Built-in Camera
Section 2I
Using Media and Web Features
In This Section
ࡗ ࡗ ࡗ ࡗ Using the Media Player
Using the Web Browser
Downloading and Copying Files
Using the File Manager
The media and Web features on your device let you enjoy music
and video and explore the Internet right on your device. This
section explains how to play music and videos, get to the
Internet, and copy and manage files.
Section 2I: Using Media and Web Features
95
Using the Media Player
A version of Windows Media Player Mobile version 10 (or
higher) for Smartphones is available on your device to play
digital audio and video files that are stored on your device or
on the Web.
By default, Windows Media Player Mobile can play the
following types of files: Windows Media Audio (WMA),
Windows Media Video (WMV), and Motion Picture Experts
Group-2 Audio Layer-3 (MP3).
To go to the Windows Media player:
1. Press Start (left softkey).
2. Select Windows Media.
If you have Windows Media Player 11 on your computer, you
can easily synchronize the media player library of your
computer to your device so you can take your favorite music
and videos with you on the go. When you update the library
miniSD card inserted in your device, that can be played on the
Windows Media player.
To update the library:
1. Go to the Windows Media player.
2. Press Menu (right softkey) and select Library.
3. Press Menu (right softkey) and select Update Library.
96
Section 2I: Using Media and Web Features
Playing Music and Videos
These are some of the options you have when playing music
or video files:
ⅷ
ⅷ
ⅷ
To play or pause a music or video file, press the
Enter key (Á).
To skip to the previous or next file, press the
Navigation key (S) left or right.
To increase or decrease the volume, press the
Navigation key (S) up or down.
The maximum volume within the Media Player is limited by
the master volume. To maximize volume for the Media Player,
first increase the master volume by pressing and holding the
thumb wheel until the volume screen appears. for more
information, see “Setting the Volume” on page 41.
Tip:
ⅷ
ⅷ
ⅷ
If you need to turn the sound off, press #.
To switch to full screen video playback, press 0.
To fast forward or rewind, press and hold the
Navigation key (S) left or right.
To play video in full screen:
ᮣ
While the video is playing, press Menu (right softkey)
and select Full Screen.
Only videos that were recorded with the correct resolution
will play in full-screen mode.
To play music and video files that you have on your miniSD card:
1. Make sure the files you want to play are on the miniSD
card inserted in your device.
When you download music files with your device, save
them to the miniSD card.
Tip:
Section 2I: Using Media and Web Features
97
2. Open the Windows Media player and update your
library. (See page 96.)
3. After your library is updated, you can view and play the
new music files.
To play a song or video that is on the Internet or network:
1. Go to the Windows Media player.
2. Press Menu (right softkey) and select Library.
3. Press Menu (right softkey) and select Open URL.
Setting Video Controls
You can set up keys on your device to control the media
player.
1. Go to the Windows Media player.
2. Press Menu (right softkey) and select Options > Buttons.
3. Scroll and highlight the Windows Media player action
you want to assign a button or key press.
button or key press to the action.
5. Press the button or key you want to assign to the action.
6. When you are finished assigning buttons or key presses
to actions, press OK (left softkey) and Done (left softkey)
to complete the set up.
98
Section 2I: Using Media and Web Features
Using the Web Browser
You can use Internet Explorer Mobile to search and view
the Web.
To use the Web browser to browse the Internet:
1. Press Start (left softkey).
2. Select Internet Explorer.
3. With the Web browser open, press Menu (right softkey)
and select Address Bar.
4. Press and hold Undo/Back key (À) or the Undo/Back
button on the side of your device to clear the URL from
the address bar.
5. Enter the address and press Go (left softkey).
These are some of the options you have when using the Web
browser:
ⅷ
ⅷ
ⅷ
ⅷ
To go to a link in a Web page, use the navigation key to
highlight the link and then press s.
To change connection options, press Menu (right softkey)
and select Tools > Options > Connections.
To show pictures, press Menu (right softkey) and select
View > Show Pictures.
To add a Web address to your Favorites, open the Web
page, press Menu (right softkey), and select Add to
Favorites.
Section 2I: Using Media and Web Features
99
Downloading and Copying Files
You can copy or download media files from your computer or
the Internet onto your device.
Downloading Files
You can use the Web browser on your device to download
files. You can choose to save these files to your device or to
the miniSD card inserted in your device.
Copying Files From Your Computer
If you have files on your computer that you want to use on
your device, you can copy them to your device or to the
miniSD card inserted in your device.
You must have ActiveSync on your computer installed
as described in “Installing and Setting Up ActiveSync” on
page 62.
Note:
To copy files from your computer:
1. Connect the device to your computer using a USB cable
or a Bluetooth connection. (“Synchronizing Using a
Computer” on page 60.)
2. In ActiveSync on your computer, click Explore and
double-click My Windows Mobile device.
3. On your computer, find the files you would like to copy
to your device and drag and drop the files into the My
Windows Mobile folder.
100
Section 2I: Using Media and Web Features
If you have Windows Media Player 11 on your computer, you
can set it to automatically synchronize the media files on
your device with the media files on your computer. See the
Help menu in for Windows Media Player 11 on your
computer for more information.
Tip:
Using the File Manager
You can use the File Manager to sort, view, copy, and move
files on your device. You can use File Manager on media files
and any other type of file you can store on your device.
To go to File Manager:
1. Press Start (left softkey).
2. Select File Manager.
Section 2I: Using Media and Web Features
101
Section 2J
Using Contacts and Calendar
In This Section
ࡗ ࡗ Using Contacts
Using Calendar
Your device Contacts and Calendar features let you keep track of
the people in your life and your appointments, much like you
would on your computer. This section helps you get started
using Contacts and Calendar on your device.
You can synchronize the Contacts and Calendar on
your device with those on your computer. See
“Synchronizing” on page 59.
Tip:
102
Section 2J: Using Contacts and Calendar
Using Contacts
The number of contacts you can store in your device is limited
only by your device’s memory capacity. Each contact can store
a great deal of information about the person you create it for:
not just device numbers and email addresses, but Web sites,
street addresses, birthdays, and much more. You can also
assign a category to each contact, such as “Business” or
“Personal,” to help you sort your contacts.
To help you keep track of who is calling, you can assign a
contact a custom ring tone and picture ID.
Creating a Contacts Entry
1. Press Contacts (right softkey).
— or —
Press Start (left softkey) and select Contacts.
2. Press New (left softkey).
3. Enter the information for the new contact.
4. Press Done (left softkey).
If someone who is not in your list of contacts calls you or
sends you a message, you can create a contact from your Call
History or from the message: Press Menu (right softkey) and
select Save to Contacts.
Tip:
Section 2J: Using Contacts and Calendar
103
Editing a Contacts Entry
To edit a Contacts entry:
1. Press Contacts (right softkey).
— or —
Press Start (left softkey) and select Contacts.
2. Press Menu (right softkey) and select Edit.
3. Select the Contacts entry you want to edit.
4. Scroll through the information in the contact and make
your changes.
5. Press Done (left softkey).
Finding a Contacts Entry
To view your list of contacts:
ᮣ
Press Contacts (right softkey).
— or —
ᮣ
Press Start (left softkey) and select Contacts.
list quickly.
Searching for a Name
If you have a long list of contacts, you can use a shortcut to
find the contact you want. While viewing the list of contacts,
enter the first few letters of the contact's name. The device
searches through the contacts list and displays the name.
Using Categories
Your can assign categories to your contacts that let you group
them together so you can find them more easily.
104
Section 2J: Using Contacts and Calendar
To assign a category for a contact:
1. While creating or editing a contact, scroll to and
highlight the Categories field.
2. Select the Categories field to see a list of categories you
can choose from.
3. Select the checkboxes for as many categories as you
want to assign to this contact.
4. Press Done (left softkey).
To sort your contacts by category:
1. From the list of contacts, press Menu (right softkey) and
select Filter.
2. Select the category you want. A list of your contacts in
this category will appear.
The Filter menu also lets you view only your recent contacts.
Tip:
Viewing by Company
If you enter a company name for your contacts, you can view
them by company rather than by the name of the person.
ᮣ
From the list of contacts, press Menu (right softkey) and
select View By > Company.
Assigning a Ring Tone
You can easily identify who is calling you by the ring tone if
you assign a custom ring tone to each contact.
1. While creating or editing a contact, select the Custom
ring tone field.
2. Select the custom ring tone you want to assign to the
contact.
3. Press Done (left softkey).
Section 2J: Using Contacts and Calendar
105
Assigning a Picture ID
You can assign a picture to a contact. This picture will display
when you receive a call from that contact.
1. While creating or editing a contact, select the Picture
field.
2. Select the picture you want to assign to the contact
from the thumbnail pictures you see.
To take a picture to assign to this contact right now, press and
hold the Camera (Í) key and take the picture.
Tip:
3. Press Done (left softkey).
Using Calendar
Your calendar helps organize your time and reminds you of
important events.
Creating a Calendar Event
1. Press Start (left softkey) and select Calendar. (The events
for the current day will be listed.)
2. Press Menu (right softkey) and select New Appointment.
3. Enter the event information.
To schedule an all-day event, select the All day event checkbox
under End Time.
Tip:
All-day events appear in banners at the top of the Calendar.
4. Press Done (left softkey).
106
Section 2J: Using Contacts and Calendar
Viewing Calendar Events
1. Press Start (left softkey) and select Calendar.
2. To change your schedule view, press Menu (right
softkey) and select the desired option.
3. To view an event's details, highlight the event in agenda
view and press s.
Responding to Meeting Requests
If you have your device set up to synchronize with your
company’s Exchange Server (see the Setting Up Email guide
that came with your device), you can receive and respond to
meeting requests much like you do using Outlook on your
computer.
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select your Outlook email account
3. Select the meeting request.
4. Press Accept (left softkey).
— or —
Press Menu (right softkey) and select Decline or
Tentative.
Section 2J: Using Contacts and Calendar
107
Section 2K
Using Bluetooth
In This Section
ࡗ ࡗ ࡗ Turning Bluetooth Power On or Off
Pairing With a Device
Sending Objects to Another Device
Your device features built-in Bluetooth technology, allowing you
to share information more easily than ever before. Bluetooth is a
short-range communications technology that allows you to
connect wirelessly to a number of Bluetooth devices, such as
headsets and hands-free car kits, and Bluetooth-enabled
handhelds, PCs, printers, and wireless devices. The Bluetooth
communication range is usually up to approximately 30 feet.
This section details how to make the most of your device’s
Bluetooth capabilities.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the
laws and regulations on the use of these products.
Note:
108
Section 2K: Using Bluetooth
Turning Bluetooth Power On or Off
If Bluetooth power is on, your device can automatically
connect with the handsfree device you have used before. Just
turn on the smart device or move it near the target device.
To turn Bluetooth on:
1. Press Start (left softkey).
2. Select Bluetooth > Bluetooth Manager > Settings.
3. Toggle Status to Bluetooth ON.
The Bluetooth indicator à displays in the Home screen.
To extend battery life, use the previous procedure to set
Bluetooth power to OFF when not in use. Your device will
not pair with devices until you set Bluetooth power back
to ON.
Note:
Pairing With a Device
Before you try to pair your device with another Bluetooth
device, make sure your device’s Bluetooth power is on and the
target device is on and ready in pairing or bonding mode (see
the device user’s guide). You can pair your device with
multiple Bluetooth devices, but only use it with one device at
a time.
Your device lists all the Bluetooth devices it finds within
range.
To pair with a Bluetooth device:
1. Press Start (left softkey).
2. Select Bluetooth > Bluetooth Manager.
Section 2K: Using Bluetooth
109
3. Choose the type of target device you are trying to
connect (handsfree headset, stereo headset, keyboard,
etc.).
4. Put the target device in pairing mode.
5. Press Add. The device prompts you to verify that the
target device is ready. Press Search.
6. Select the device from the list.
7. If prompted, enter the device passkey (such as 0000)
and press the Accept key.
When the devices are paired, an icon appears on the Home
screen in the Bluetooth Task Tray. An icon also appears in the
status indicator row of the Home screen.
For specific information about the Bluetooth device you are
using with your smart device, refer to the instructions that
came with it.
Tip:
Sending Objects to Another Device
You can use Bluetooth to send Outlook email, contacts, tasks,
calendar items, audio, ring tones, pictures, video, and voice
notes from your device to a computer or other Bluetooth
device.
1. Press Start (left softkey).
2. Select Bluetooth > BT Send Object.
To select an item, press s.
Tip:
3. Press Send (left softkey).
4. Select the name of the device you want to send the file.
5. To cancel sending an item, press Menu and select Cancel.
110
Section 2K: Using Bluetooth
Section 2L
Using Voice Recognition
In This Section
ࡗ ࡗ About Voice Recognition
Using Voice Recognition
Your device’s voice-recognition software lets you place calls and
perform quick tasks using just your voice. This section includes
easy-to-follow instructions for using Voice Recognition.
Section 2L: Using Voice Recognition
111
About Voice Recognition
You can use voice recognition to make calls, and open and use
device applications by speaking into your device.
When using voice recognition, speak numbers at a normal
speed and volume, pronouncing each digit distinctly. Avoid
pausing between digits.
Not all languages support voice recognition and voice
commands.
Note:
Using Voice Recognition
To make a call, send a text message, look up contact information or
open a program:
1. Press and hold the Speakerphone/Voice Recognition
key (A) for two seconds. Your device prompts you to
say a command.
2. Say one of the following commands:
Ⅲ
“Call” and then the name or number in your
contacts list that you want to call.
Ⅲ
“Send text” and then the name or number in
your contacts list that you want to send a text
message to.
Ⅲ
Ⅲ
“Send email” and then the name or number in
your contacts list that you want to send an email
message to.
“Look up” and then the name or number in your
contacts list that you want to look up.
112
Section 2L: Using Voice Recognition
Ⅲ
“Open” and then the name of the main menu
program you want to go to. Not all main menu
programs can be accessed using voice recognition.
Your device will respond to the request by making a call,
opening a text message or email screen, opening the contact
information for the requested contact, or opening the
program.
Tips on Using Voice Recognition to Make Calls
ⅷ
Your device may prompt you to repeat a name or number.
If the name or number you say is not valid, the device will
not make the call.
ⅷ
If the device does not recognize the name or number, the
display shows a list of names or numbers, asks, “Did you
say...,” and highlights the first item in the list. Say “Yes” to
call the highlighted number, or “No” to go to the next list
item.
ⅷ
To select the name or number manually, scroll to the
name or number on the list and press Select (left softkey).
Section 2L: Using Voice Recognition
113
114
Section 2L: Using Voice Recognition
Section 3A
Sprint Service Features: The Basics
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ Using Voicemail
Using SMS Text Messaging
Using On Demand
Using Caller ID
Responding to Call Waiting
Making a Three-Way Call
Using Call Forwarding
Using Your Device as a Modem
Now that you’ve mastered your device’s fundamentals, it’s
time to explore the features that enhance your Sprint
Service. This section outlines your basic Sprint Service
features.
116
Section 3A: Sprint Service Features: The Basics
Using Voicemail
Setting Up Your Voicemail
All unanswered calls to your device are automatically
transferred to your voicemail, even if your device is in use or
turned off. Therefore, you will want to set up your Sprint
Voicemail and personal greeting as soon as your device is
activated. If you need to set up your voicemail, see “Setting
Up Your Voicemail” on page 4.
Voicemail Notification
There are several ways your device alerts you to a new
message:
ⅷ
ⅷ
ⅷ
By displaying a message on the screen.
By sounding the assigned ringer type.
By displaying B at the top of your screen.
When you are roaming off the Sprint National Network, you
may not receive notification of new voicemail messages. It is
recommended that you periodically check your voicemail by
dialing 1+ area code + your phone number. When your
voicemail answers, press *and enter your passcode.
Note:
Your device accepts messages even when it is turned off.
However, you are only notified of new messages when your
device is turned on and you are in a Sprint service area.
Section 3A: Sprint Service Features: The Basics
117
Sending an Incoming Call to Voicemail
To send an incoming call directly to voicemail:
ᮣ
Press Ignore (right softkey).
Retrieving Your Voicemail Messages
You can review your messages directly from your wireless
device or from any other touch-tone device. To dial from your
wireless device, you can either speed dial your voicemail or
use the menu keys.
Using One-Touch Message Access
To retrieve your voicemail messages:
ᮣ
Press and hold 1. (Your device will dial your voicemail
box.)
You are charged for airtime minutes when you are accessing
your voicemail from your device.
Note:
Using Another Phone to Access Messages
To review your messages from another phone:
1. Dial your phone number.
2. When your voicemail answers, press *.
3. Enter your passcode.
When you call into voicemail, you first hear the header
information (date, time, and sender information) for the
message. To skip directly to the message, press 4during the
header.
Tip:
118
Section 3A: Sprint Service Features: The Basics
Voicemail Options
Your device offers several options for organizing and
accessing your voicemail.
Using Expert Mode
Using the Expert Mode setting for your personal voicemail
box helps you navigate through the voicemail system more
quickly by shortening the voice prompts you hear at each
level.
To turn Expert Mode on or off:
1. Press and hold 1 to access your voicemail. (If your
voicemail box contains any new or saved messages,
press * to access the main voicemail menu.)
2. Press 3to change your Personal Options, following the
system prompts.
3. Press 3 for Expert Mode. Follow the prompts to turn
Expert Mode on or off.
Setting Up Group Lists
You can create up to 20 separate group lists, each with up to
20 customers.
To create a Group List:
1. Press and hold 1 to access your voicemail. (If your
voicemail box contains any new or saved messages,
press * to access the main voicemail menu.)
2. Press 3to change your Personal Options, following the
system prompts.
3. Press 1 for Settings.
4. Press 5 for Group Distribution Lists.
5. Follow the voice prompts to create, edit, rename, or
delete group lists.
Section 3A: Sprint Service Features: The Basics
119
Sprint Callback
You can return a call after listening to a message without
disconnecting from voicemail.
To return a call directly from voicemail:
ᮣ
Press 8 after listening to a message.
Voicemail-to-Voicemail Message
You can record and send a voicemail message to other
Sprint Voicemail users.
To record and send a voicemail message:
1. From the main voicemail menu, press 2 to send a
message.
2. Follow the voice prompts to send your voicemail
message.
Voicemail-to-Voicemail Message Reply
You can record and send a voicemail message in response to a
voicemail from any other Sprint Voicemail user.
To respond and send a voicemail message:
1. After listening to a voicemail message, press 2.
2. Follow the voice prompts to record and send your reply.
Voicemail-to-Voicemail Message Forwarding
You can forward a voicemail message, except those marked
“Private,” to other Sprint Voicemail users.
To forward a voicemail message:
1. After listening to a message, press 6.
2. Follow the voice prompts to forward the voicemail
message.
120
Section 3A: Sprint Service Features: The Basics
Voicemail-to-Voicemail Receipt Request
You can request confirmation that your voicemail message
has been listened to when you send, forward, or reply to
other Sprint users.
To mark your message receipt requested:
1. After you have recorded a message, press 1to indicate
that you are satisfied with the message you recorded.
2. Press 4 to mark receipt requested.
3. Press 1 to send your voicemail message.
Extended Absence Greeting
When your device is turned off or you are off the Sprint
National Network for an extended period, this greeting can
be played instead of your normal personal greeting.
To record an extended absence greeting:
1. From the main voicemail menu, press 3 for Personal
Options.
2. Press 2 for greetings.
3. Press 3 to record an Extended Absence Greeting.
Section 3A: Sprint Service Features: The Basics
121
Voicemail Menu Key
Following the prompts on the voicemail system, you can use
your keypad to navigate through the voicemail menu. The
following list outlines your device’s voicemail menu structure.
1Listen
2Send
3Personal Options
1Settings
1Skip passcode
2Autoplay
3Message Date & Time On/Off
4Change Passcode
5Group Distribution List
6Numeric Paging to a Wireless Phone
*Return to Personal Options Menu
2Greetings
1MainGreeting
2Recorded Name
3Extended Absence Greeting
*Return to Personal Options Menu
3Expert Mode (On/Off)
*Return to Personal Options Menu
8Place a Call
*Exit
122
Section 3A: Sprint Service Features: The Basics
Using SMS Text Messaging
With SMS Text Messaging, you can send instant text
messages from your device to other messaging-ready phones
— and they can send messages to you.
In addition, SMS Text Messaging includes a variety of preset
messages, such as “I’m running late, I’m on my way,” that
make composing messages fast and easy. You can also
customize your own preset messages (up to 160 characters)
from your device.
Sending and replying to text messages is very much like
sending and replying to email on your device.
To go to SMS Text Messaging:
1. Press Start (left softkey) and then select Messaging.
— or —
Press the Message/Display Off key ( ).
2. Select Text Messages.
To send a text message from the text message application:
1. Go to SMS Text Messaging.
2. Press Menu (right softkey) and select New.
3. In the To field, enter the phone numbers you want to
send the message to. Insert a semicolon (;) between
multiple numbers or addresses.
You can quickly enter phone numbers from your contacts. In
the To field, press Enter (Á) and select a recipient from the
list. Then select the recipient's phone number or email
address.
Tip:
4. Use the keypad to compose a message (or press Menu
[right softkey] and select My Text to choose a preset
message).
Section 3A: Sprint Service Features: The Basics
123
5. Press Send (left softkey).
To send a text message from the Home screen:
1. Use the keypad to enter the phone number you wish to
send a message to.
2. Press Menu (right softkey).
3. Scroll down to Send Text Message and press s.
4. Compose your message.
5. Press Send (left softkey).
You can also send text messages to numbers in your
Contacts: Press Start (left softkey) and select Contacts. Scroll
to the Contacts entry containing the phone number you
wish to send a text message to. Press s. Scroll down to
Send Text Message and press s.
Tip:
124
Section 3A: Sprint Service Features: The Basics
Using On Demand
With Sprint’s exclusive On Demand feature, you can
personalize your device's data services to suit your needs.
The On Demand feature makes it easier than ever to receive
the most popular Web information and categories instantly.
On Demand uses the ZIP code you provide to customize the
content you receive, so you can get the information you want,
when you want it.
On Demand acts like a computer browser’s customized home
page, displaying a variety of top categories such as News,
Sports, Weather, Money, Movies, and more. This information
is updated throughout the day, so you’ll always be up-to-
date.
Initializing Your On Demand Service
To initialize your device’s On Demand service:
2. Enter your preferred ZIP code and press Done (left
softkey). (You may be prompted to download the On
Demand program and components. Follow the
on-screen prompts to load the program.)
Once you've initialized your program, the On Demand service
will customize itself to your selected location and the On
Demand menu screen will be displayed.
Section 3A: Sprint Service Features: The Basics
125
Accessing On Demand Information
Finding the information you’re looking for with On Demand is
as easy as navigating a Web browser on your computer. (The
following example will illustrate how to access News
information.)
To access News information using On Demand:
1. Press Start (left softkey) and then select Get On Demand.
(The On Demand menu screen will be displayed.)
2. From the On Demand menu screen, highlight a category
(in this case, News) and press s. (You will be presented
with a list of news categories.)
3. Use your navigation key or thumb wheel to scroll
through the news categories or stories. If applicable, the
left and right softkeys will offer additional options.
Updating On Demand Information
The On Demand news and information is automatically
how your device receives updates.
To manually retrieve On Demand updates:
ᮣ
From an On Demand category page (such as News),
press Update (left softkey). (Your device will retrieve
updates for the selected category.)
126
Section 3A: Sprint Service Features: The Basics
Using Caller ID
Caller ID allows people to identify a caller before answering
the device by displaying the number of the incoming call. If
you do not want your number displayed when you make a
call, just follow these easy steps.
To block your phone number from being displayed for a specific
outgoing call:
1. Press *67.
2. Enter the number you want to call.
3. Press N.
To permanently block your number, call Sprint Customer Service.
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you to incoming
phone calls. Your display screen alerts you that another call is
coming in and shows the caller’s number (if it is available).
To respond to an incoming call while you’re on a call:
ᮣ
Press N. (This puts the first caller on hold and answers
the second call.)
To switch back to the first caller:
ᮣ
Press N again.
For those calls where you don’t want to be interrupted, you
can temporarily disable Call Waiting by pressing *70
before placing your call. Call Waiting is automatically
reactivated after you end the call.
Tip:
Section 3A: Sprint Service Features: The Basics
127
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the
same time. When using this feature, the normal airtime rates
will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press the N.
2. Once you have established the connection, place this
call on hold by pressing N.
3. When you hear a dial tone, enter the second number
you wish to call and press N.
4. When you’re connected to the second party, press N
for two seconds to begin your Three-Way Call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the
call and are the first to hang up, all other callers are
disconnected.
Call Waiting and Three-Way Calling may not be available
while roaming off the Sprint National Network.
Note:
128
Section 3A: Sprint Service Features: The Basics
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to
another phone number — even when your device is turned
off. You can continue to make calls from your device when
Call Forwarding is activated.
To activate Call Forwarding:
1. Press *72.
2. Enter the area code and device number to which your
future calls should be forwarded.
3. Press N. (You will hear a tone to confirm the activation
of Call Forwarding.)
To deactivate Call Forwarding:
1. Press *720.
2. Press N. (You will hear a tone to confirm the
deactivation.)
You are charged a higher rate for calls you have forwarded.
Note:
Section 3A: Sprint Service Features: The Basics
129
Using Your Device as a Modem
After you have installed Microsoft Windows Mobile Device
Center (for Vista) or Microsoft ActiveSync 4.5 or later (for
Windows XP and prior Windows operating systems) on your
computer, you can use your MOTO Q 9c as a modem with that
computer.
To use this service, you are required to sign up on a Sprint
Power Vision with Phone as Modem plan. Go to
www.sprint.com or visit a Sprint Store for Phone as Modem
plan details and more information..
Note:
To set up your device for use as a modem:
1. Press Start (left softkey) and then select Internet Sharing.
2. Scroll down to PC Connection.
3. If you are going to connect your device to your computer
using the mini-USB data cable that came with you
device, set this option to USB.
— or —
If you are going to connect your device to your computer
using your device’s Bluetooth capabilities, set this
option to Bluetooth PAN.
4. Scroll down to Network Connection and set this option to
Sprint Network.
130
Section 3A: Sprint Service Features: The Basics
To use your device as a modem:
1. After you have set your Internet Sharing options,
connect your device to you computer using the
mini-USB data cable or using the device’s Bluetooth
capabilities, depending on the PC Connection option
you selected.
2. If you are not already at the Internet Sharing screen, go
to it by pressing Start (left softkey) and then selecting
Internet Sharing.
3. Once the Status field on the Internet Sharing screen
displays Connected, your computer and device are ready
to connect to the internet. To establish an internet
connection, press Connect (left softkey).
Section 3A: Sprint Service Features: The Basics
131
Section 3B
Sprint Voice Command
In This Section
ࡗ ࡗ ࡗ ࡗ Getting Started With Sprint Voice Command
Creating Your Own Address Book
Making a Call With Sprint Voice Command
Getting Information With Sprint Voice Command
With Sprint Voice Command, reaching your friends, family,
and coworkers has never been easier — especially when
you’re on the go. You can even listen to Web-based
information, such as news, weather, and sports. Your voice
does it all with Sprint Voice Command.
This section outlines the Sprint Voice Command service.
132
Section 3B: Sprint Voice Command
Getting Started With Sprint
Voice Command
With Sprint Voice Command:
ⅷ
ⅷ
ⅷ
ⅷ
You can store all your contacts’ phone numbers, so you
can simply say the name of the person you want to call.
There’s no need to punch in a lot of numbers, memorize
voicemail passwords, or try to dial while you’re driving.
You can call anyone in your address book — even if you
don’t remember their phone number.
You don’t need to worry about losing your Contacts or
address book. This advanced service is network-based, so
if you switch phones or happen to lose your device, you
won’t lose your Contacts or address book.
It’s Easy to Get Started
There are two easy ways to sign up for Sprint Voice
Command:
ᮣ
Sign up when you purchase and activate your device.
ᮣ
Just dial *2 and then press N from your device to
contact Sprint Customer Service and sign up.
There is a monthly charge for Sprint Voice Command.
Section 3B: Sprint Voice Command
133
Creating Your Own Address Book
You can program up to 500 names into your personal address
book, with each name having up to five phone numbers.
That’s 2,500 phone numbers, and with the advanced
technology of Sprint Voice Command, you can have instant
access to all of them.
There are four ways to update your address book:
ⅷ
phone number and password, and access a fully
functional Web-based address book to create and update
your Contacts.
ⅷ
Use an Existing Address Book. Automatically merge address
books from desktop software applications with
Sprint SyncSM Services for no additional charge. Simply
click on the “Click to synchronize” button within your
Sprint Voice Command personal address book at
ⅷ
Use Voice Recordings. Simply dial *and then press N and
say, “Add name.” You will then be asked to say the name
and number you want to add to your personal address
book. Your address book can store up to 20 voice recorded
names at once.
ⅷ
Call Sprint 411. If you don’t have a computer or Internet
access handy, you can have Sprint 411 look up phone
numbers for you and automatically add them to your
address book. Just dial *and then press N and say “Call
operator” and we’ll add two names and all the numbers
associated with those names to your address book for our
standard directory assistance charge.
134
Section 3B: Sprint Voice Command
Making a Call With Sprint Voice Command
To make a call with Sprint Voice Command:
1. Press * and then press N and you’ll hear the “Ready”
prompt.
2. After the “Ready” prompt, simply say, in a natural voice,
“Call” and the name of the person or the number you’d
like to call. (For example, you can say, “Call Jane Smith at
work,” “Call John Baker on the mobile phone,” “Call 555-
1234,” or “Call Bob Miller.”)
3. Your request will be repeated and you will be asked to
verify. Say “Yes” to call the number or person. (The
number will automatically be dialed.) Say “No” if you
wish to cancel.
Keep in mind that Sprint Voice Command recognizes not only
your voice, but any voice, so that others can experience the
same convenience if they use your device.
Tip:
For more helpful hints on Sprint Voice Command, including a
list of recognized commands and an interactive tutorial, visit
Section 3B: Sprint Voice Command
135
Getting Information With Sprint
Voice Command
To access information using Sprint Voice Command:
1. Press * and then press N.
2. Say “Call the Web” and choose from a listing of
information categories like news, weather, and sports.
— or —
Simply say “Call news room,” “Call the weather,” “Call
Sports Central,” etc.
Sprint Voice Command is not available while roaming off the
Sprint National Network.
Note:
136
Section 3B: Sprint Voice Command
Important Safety Information
In This Section
ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ ࡗ General Precautions
Safety and General Information
FCC Notice To Users
Hearing Aid Compatibility
Specific Absorption Rate Data
Information From the World Health Organization
Product Registration
Owner’s Record
Phone Guide Proprietary Notice
Export Law Assurances
Wireless: The New Recyclable
California Perchlorate Label
Privacy and Data Security
Smart Practices While Driving
This phone guide contains important operational and safety
information that will help you safely use your phone. Failure to read
and follow the information provided in this phone guide may
result in serious bodily injury, death, or property damage.
138
Section 4A: Important Safety Information
General Precautions
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
ⅷ
Speak directly into the mouthpiece.
ⅷ
Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the
power off and remove the battery.
ⅷ
ⅷ
Do not expose your phone to direct sunlight for extended
periods of time (such as on the dashboard of a car).
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending, or sitting on it.
ⅷ
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this
equipment.
Note: For the best care of your phone, only authorized
personnel should service your phone and accessories.
Failure to do so may be dangerous and void your
warranty.
Section 4A: Important Safety Information
139
Safety and General Information
This section contains important information on the safe and efficient
operation of your mobile device. Read this information before using
your mobile device.1
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your mobile device, the system handling your call controls
the power level at which your mobile device transmits.
Your Motorola mobile device is designed to comply with local
regulatory requirements in your country concerning exposure of
human beings to RF energy.
Operational Precautions
For optimal mobile device performance and to be sure that
human exposure to RF energy does not exceed the guidelines set
forth in the relevant standards, always follow these instructions
and precautions.
External Antenna Care
If your mobile device has an external antenna, use only a
Motorola-supplied or approved replacement antenna. Use of
unauthorized antennas, modifications, or attachments could
damage the mobile device and/or may result in your device not
complying with local regulatory requirements in your country.
DO NOT hold the external antenna when the mobile device is IN
USE. Holding the external antenna affects call quality and may
cause the mobile device to operate at a higher power level than
needed.
1. The information provided in this document supersedes the
general safety information in user’s guides published prior to
May 1, 2006.
140
Section 4A: Important Safety Information
Product Operation
When placing or receiving a phone call, hold your mobile device
just like you would a landline phone.
If you wear the mobile device on your body, always place the
mobile device in a Motorola-supplied or approved clip, holder,
holster, case, or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola, keep the mobile
device and its antenna at least 2.5 centimeters (1 inch) from your
body when transmitting.
When using any data feature of the mobile device, with or
without an accessory cable, position the mobile device and its
antenna at least 2.5 centimeters (1 inch) from your body.
Using accessories not supplied or approved by Motorola may
cause your mobile device to exceed RF energy exposure
guidelines. For a list of Motorola-supplied or approved
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed, or
otherwise configured for RF energy compatibility. In some
circumstances your mobile device may cause interference with
other devices.
Follow Instructions to Avoid Interference Problems
Turn off your mobile device in any location where posted notices
instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to
do so by airline staff. If your mobile device offers an airplane
mode or similar feature, consult airline staff about using it in
flight.
Implantable Medical Devices
If you have an implantable medical device, such as a pacemaker
or defibrillator, consult your physician before using this mobile
device.
Section 4A: Important Safety Information
141
Persons with implantable medical devices should observe the
following precautions:
ⅷ
ALWAYS keep the phone more than 20 centimeters (8 inches)
from the implantable medical device when the mobile vice is
turned ON;
ⅷ
ⅷ
DO NOT carry the phone in a breast pocket;
Use the ear opposite the implantable medical device to
minimize the potential for interference;
ⅷ
Turn OFF the mobile device immediately if you have any
reason to suspect that interference is taking place.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about
using your mobile device with your implantable medical device,
consult your health care provider.
Hearing Aids
Some mobile devices may interfere with some hearing aids. In
the event of such interference, you may want to consult your
hearing aid manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical device, consult your
physician or the manufacturer of your device to determine if it is
adequately shielded from RF energy. Turn off your mobile device
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Driving Precautions
Check the laws and regulations on the use of mobile devices in
the area where you drive. Always obey them.
When using your mobile device while driving, please:
ⅷ
Give full attention to driving and to the road. Using a mobile
device may be distracting. Discontinue a call if you can’t
concentrate on driving.
ⅷ
Use hands-free operation, if available.
142
Section 4A: Important Safety Information
ⅷ
ⅷ
Pull off the road and park before making or answering a call if
driving conditions so require.
Do not place a mobile device in the airbag deployment area.
Responsible driving practices can be found in the “Smart
Practices While Driving” section of this guide (see page 157) and/
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can't concentrate on
driving. Additionally, the use of wireless devices and their
accessories may be prohibited or restricted in certain
areas. Always obey the laws and regulations on the use of
these products.
Operational Warnings
Obey all posted signs when using mobile devices in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust,
or metal powders.
When you are in such an area, turn off your mobile device, and do
not remove, install, or charge batteries. In such areas, sparks can
occur and cause an explosion or fire.
Batteries and Chargers
Caution: Improper treatment or use of batteries may present a
danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery
Safety” section in this user's guide.
Your battery, charger, or mobile device may contain symbols,
defined as follows:
Section 4A: Important Safety Information
143
Symbol
Definition
032374o
Important safety information follows.
Do not dispose of your battery or mobile device
in a fire.
Your battery or mobile device may require
recycling in accordance with local laws. Contact
your local regulatory authorities for more
information.
032375o
Do not throw your battery or mobile device in
the trash.
Your mobile device contains an internal lithium
ion battery.
Li Ion BATT
032378o
Do not let your battery, charger, or mobile device
get wet.
Listening at full volume to music or voice through
a handset may damage your hearing.
Choking Hazards
Your mobile device or its accessories may include detachable
parts, which may present a choking hazard to small children.
Keep your mobile device and its accessories away from small
children.
Glass Parts
Some parts of your mobile device may be made of glass. This
glass could break if the product is dropped on a hard surface or
receives a substantial impact. If glass breaks, do not touch or
attempt to remove. Stop using your mobile device until the glass
is replaced by a qualified service center.
144
Section 4A: Important Safety Information
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or
blackouts when exposed to flashing lights, such as when playing
video games. These may occur even if a person has never had a
previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-
lights feature (if available) on your mobile device.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and
stop use if you are very tired.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience
occasional discomfort in your hands, arms, shoulders, neck, or
other parts of your body. If you continue to have discomfort
during or after such use, stop use and see a physician.
Section 4A: Important Safety Information
145
FCC Notice To Users
Motorola has not approved any changes or modifications to this
device by the user. Any changes or modifications could void the
user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
If your mobile device or accessory has a USB connector, or is
otherwise considered a computer peripheral device whereby it
can be connected to a computer for purposes of transferring data,
then it is considered a Class B device and the following statement
applies:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ⅷ
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
ⅷ
ⅷ
ⅷ
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
146
Section 4A: Important Safety Information
Hearing Aid Compatibility
A number of Sprint Nextel phones have been tested for hearing
aid compatibility. When some wireless phones are used with
certain hearing aids, users may detect a noise which can interfere
with the effectiveness of the hearing aid.
Some hearing aids are more “immune” than others to this
interference noise, and phones can also vary in the amount of
interference noise they may generate. ANSI standard C63.19 was
developed to provide a standardized means of measuring both
mobile phone and hearing aids to determine usability rating
categories for both.
Ratings have been developed for mobile phones to assist hearing
aid users find phones that may be compatible with their hearing
aid. Not all phones have been rated for compatibility with
hearing aids. Phones that have been rated have a label with the
rating(s) located on the box, and at
www.motorola.com/accessibility.
These ratings are not guarantees of compatibility. Results will
vary depending on the user's hearing aid and individual type and
degree of hearing loss. If a hearing aid is particularly vulnerable
to interference, even a phone with a higher rating may still cause
unacceptable noise levels in the hearing aid. Trying out the phone
with your hearing aid is the best way to evaluate it for your
personal needs.
“M” Rating: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing aids than unrated phones. (M4 is the
“better” or higher of the two ratings.) On those models with an
extendable antenna, this rating is determined only with the
antenna extended.
Section 4A: Important Safety Information
147
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing aid's telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the “better” or
higher of the two ratings.) On those models with a telecoil mode
setting, this rating is determined only with the phone so set. For
setting instructions, see “Features for the Hearing Impaired” in
the section entitled “Advanced Calling Features”. Note that not all
hearing aids have telecoils in them.
Hearing aids may also be measured for immunity to interference
from wireless phones and may have ratings similar to wireless
phones. Ask your hearing health care professional for the rating
of your hearing aid. Add the rating of your hearing aid and your
phone to determine the estimated usability:
ⅷ
Any combined rating equal to or greater than six offers
excellent use.
ⅷ
ⅷ
Any combined rating equal to five is considered normal use.
Any combined rating equal to four is considered usable.
Thus, if you use an M3 phone with a M3 hearing aid you will have
a combined rating of six for “excellent use.” This methodology
applies equally for T ratings.
Should you experience interference or find the quality of service
unsatisfactory after purchasing your phone, promptly return it to
the store within 30 days of purchase. With the Sprint 30-day Risk-
Free Guarantee, you may return the phone within 30 days of
purchase for a full refund.
More information about hearing aid compatibility may be found
at: www.motorola.com/accessibility, www.fcc.gov, www.fda.gov,
and www.hearingloss.org/learn/cellphonetech.asp
148
Section 4A: Important Safety Information
Specific Absorption Rate Data
This model wireless phone meets the government’s requirements for
exposure to radio waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age or health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC and by the Canadian regulatory
authorities is 1.6 W/kg.1 Tests for SAR are conducted using
standard operating positions accepted by the FCC and by Industry
Canada with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless
base station, the lower the power output.
1. In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to account
for any variations in measurements.
Section 4A: Important Safety Information
149
Before a phone model is available for sale to the public in the U.S.
and Canada, it must be tested and certified to the FCC and
Industry Canada that it does not exceed the limit established by
each government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
reported to the FCC and available for review by Industry Canada.
The highest SAR value for this model phone when tested for use
at the ear is 1.30 W/kg, and when worn on the body, as described
in this user guide, is 1.30 W/kg. (Body-worn measurements differ
among phone models, depending upon available accessories and
regulatory requirements).1
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the governmental
requirements for safe exposure. Please note that improvements
to this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
or the Canadian Wireless Telecommunications Association
(CWTA) Web site:
1. The SAR information reported to the FCC includes the FCC-
accepted Motorola testing protocol, assessment procedure, and
measurement uncertainty range for this product.
150
Section 4A: Important Safety Information
Information From the World Health
Organization
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Product Registration
Online Product Registration:
Product registration is an important step toward enjoying your
new Motorola product. Registering helps us facilitate warranty
service, and permits us to contact you should your product
require an update or other service. Registration is for U.S.
residents only and is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales
receipt to confirm warranty status.
Thank you for choosing a Motorola product.
Section 4A: Important Safety Information
151
Owner’s Record
The model number, regulatory number and serial number are
located on a nameplate inside the battery compartment. Record
the serial number in the space provided below. This will be
helpful if you need to contact us about your phone in the future.
Model: MOTO Q 9c by Motorola
Serial No.:
Phone Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under
one or more of the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the
exportation or re-exportation of this product to certain
destinations. For further information contact the U.S.
Department of Commerce or the Canadian Department of
Foreign Affairs and International Trade.
152
Section 4A: Important Safety Information
Wireless: The New Recyclable
Your mobile device can be recycled. Recycling your mobile device
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their mobile devices
and have taken steps to promote the collection and
environmentally sound recycling of end-of-life devices.
As a mobile device user, you have an important role in ensuring
that this device is recycled properly. When it comes time to give
this phone up or trade it in for a new one, please remember that
the phone, the charger, and many of its accessories can be
recycled. It's easy. To learn more about CTIA's Recycling Program
for Used Wireless Devices, please visit
Section 4A: Important Safety Information
153
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery
on the printed circuit board that may contain very small amounts
of perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumers.
154
Section 4A: Important Safety Information
Privacy and Data Security
Motorola understands that privacy and data security are
important to everyone. Because some features of your mobile
device may affect your privacy or data security, please follow
these recommendations to enhance protection of your
information:
ⅷ
Monitor access —Keep your mobile device with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
Keep software up to date —If Motorola or a software/
application vendor releases a patch or software fix for your
mobile device which updates the device’s security, install it as
soon as possible.
ⅷ
ⅷ
Erase before recycling —Delete personal information or data
from your mobile device prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to delete
all personal information from your device, see the section
entitled “Erasing Data” and “Resetting Your Phone” in this
user’s guide.
Note: For information on backing up your mobile device data
before erasing it, go to www.motorola.com and then
navigate to the “downloads” section of the consumer
Web page for “Motorola Backup” or “Motorola Phone
Tools.”
ⅷ
Understanding AGPS — In order to comply with emergency
caller location requirements of the FCC, certain Motorola
mobile devices incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be used
in non-emergency applications to track and monitor a user’s
location—for example, to provide driving directions. Users
who prefer not to permit such tracking and monitoring
should avoid using such applications.
Section 4A: Important Safety Information
155
If you have further questions regarding how use of your mobile
device may impact your privacy or data security, please contact
Service.
156
Section 4A: Important Safety Information
Smart Practices While Driving
Drive Safe, Call SmartSM
Check the laws and regulations on the use of mobile devices and their
accessories in the areas where you drive. Always obey them. The use
of these devices may be prohibited or restricted in certain areas.
Your mobile device lets you communicate by voice and data—
almost anywhere, anytime, wherever wireless service is available
and safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your mobile device while
driving, remember the following tips:
ⅷ
Get to know your Motorola mobile device and its features such as
speed dial and redial. If available, these features help you to
place your call without taking your attention off the road.
When available, use a handsfree device. If possible, add an
additional layer of convenience to your mobile device with
one of the many Motorola Original™ handsfree accessories
available today.
ⅷ
ⅷ
ⅷ
ⅷ
ⅷ
Position your mobile device within easy reach. Be able to access
your mobile device without removing your eyes from the
road. If you receive an incoming call at an inconvenient time,
if possible, let your voicemail answer it for you.
Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
Do not take notes or look up phone numbers while driving.
Jotting down a “to do” list or going through your address
book takes attention away from your primary
responsibility—driving safely.
Dial sensibly and assess the traffic; if possible, place calls when
your car is not moving or before pulling into traffic. If you must
make a call while moving, dial only a few numbers, check the
road and your mirrors, then continue.
Section 4A: Important Safety Information
157
ⅷ
Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations that can divert your
attention away from the road.
ⅷ
ⅷ
Use your mobile device to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.
Use your mobile device to help others in emergencies. If you see
an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other local
emergency number, as you would want others to do for you.*
Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside assistance or
other special non-emergency wireless number.*
ⅷ
* Wherever wireless phone service is available.
158
Section 4A: Important Safety Information
Section 4B
Motorola’s Warranty
In This Section
ࡗ ࡗ Motorola Limited Warranty for the United States and Canada
Service and Repairs
Your phone has been designed to provide you with reliable, worry-
free service. If for any reason you have a problem with your
equipment, please refer to Motorola’s warranty in this section.
For information regarding the terms and conditions of
Customer Service at 1-800-SPRINT1 (1-800-777-4681).
Note: In addition to the warranty provided by Motorola, which
is detailed on the following pages, Sprint offers a number
of optional plans to cover your equipment for non-
warranty claims. Sprint Total Equipment Protection
provides the combined coverage of the Sprint Equipment
Replacement Program and the Sprint Equipment Service
and Repair Program, both of which are available
separately. Each of these programs may be signed up for
within 30 days of activating your phone. For more details,
please visit your nearest Sprint Store or call Sprint at
1-800-584-3666.
Section 4B: Motorola’s Warranty
159
Motorola Limited Warranty for
the United States and Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc.
warrants its telephones, pagers, messaging devices, and
consumer and professional two-way radios (excluding
commercial, government or industrial radios) that operate via
Family Radio Service or General Mobile Radio Service, Motorola-
branded or certified accessories sold for use with these Products
(“Accessories”) and Motorola software contained on CD-ROMs or
other tangible media and sold for use with these Products
(“Software”) to be free from defects in materials and
workmanship under normal consumer usage for the period(s)
outlined below. This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola Products,
Accessories and Software purchased by consumers in the United
States or Canada, which are accompanied by this written
warranty:
Products and Accessories
Products Covered
Length of Coverage
Products and Accessories as
defined above, unless
One (1) year from the date of
purchase by the first
otherwise provided for below. consumer purchaser of the
product unless otherwise
provided for below.
Decorative Accessories and
Cases. Decorative covers,
bezels, PhoneWrap™ covers
and cases.
Limited lifetime warranty for
the lifetime of ownership by
the first consumer purchaser
of the product.
160
Section 4B: Motorola’s Warranty
Monaural Headsets. Ear buds
and boom headsets that
transmit mono sound
Limited lifetime warranty for
the lifetime of ownership by
the first consumer purchaser
of the product.
through a wired connection.
Consumer and Professional
Two-Way Radio Accessories.
Ninety (90) days from the date
of purchase by the first
consumer purchaser of the
product.
Products and Accessories that
are Repaired or Replaced.
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is
longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper
operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the
product resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand, dirt or the
like, extreme heat, or food; (c) use of the Products or Accessories
for commercial purposes or subjecting the Product or Accessory
to abnormal usage or conditions; or (d) other acts which are not
the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified
Products, Accessories, Software or other peripheral equipment
are excluded from coverage.
Section 4B: Motorola’s Warranty
161
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone
other than Motorola, or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers
or date tags that have been removed, altered or obliterated; (b)
broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products
Accessories or Software is excluded from coverage.
Software
Products Covered
Length of Coverage
Software. Applies only to
physical defects in the media
that embodies the copy of the
software (e.g. CD-ROM, or
floppy disk).
Ninety (90) days from the date
of purchase.
Exclusions
Software Embodied in Physical Media. No warranty is made that
the software will meet your requirements or will work in
combination with any hardware or software applications
provided by third parties, that the operation of the software
products will be uninterrupted or error free, or that all defects in
the software products will be corrected.
Software NOT Embodied in Physical Media. Software that is not
embodied in physical media (e.g. software that is downloaded
from the internet), is provided “as is” and without warranty.
162
Section 4B: Motorola’s Warranty
Who Is Covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
What Will Motorola Do?
Motorola, at its option, will at no charge repair, replace or refund
the purchase price of any Products, Accessories or Software that
does not conform to this warranty. We may use functionally
equivalent reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software or applications
added to your Product, Accessory or Software, including but not
limited to personal contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software and applications
please create a back up prior to requesting service.
Section 4B: Motorola’s Warranty
163
How to Obtain Warranty Service or Other
Information
USA
Phones
1-800-520-6403
Pagers
1-800-548-9954
Two-Way Radios and Messaging
Devices
1-800-353-2729
Canada
TTY
All Products
1-800-461-4575
1-888-390-6456
For Accessories and Software, please call the telephone number
designated above for the product with which they are used.
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a)
a copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name
of your service provider, if applicable; (d) the name and location
of the installation facility (if applicable) and, most importantly;
(e) your address and telephone number.
164
Section 4B: Motorola’s Warranty
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS
OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR
APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT
THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from state
to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute
copies of the Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the Products
associated with such Motorola software. No other use, including
without limitation disassembly of such Motorola software or
exercise of the exclusive rights reserved for Motorola, is
permitted.
Section 4B: Motorola’s Warranty
165
Section 4C
Microsoft End User License Agreement
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6
SOFTWARE
These license terms are an agreement between you and
Motorola, Inc. (“Motorola”). Please read them. They apply to the
software included on this device. The software also includes any
separate media on which you received the software.
The software on this device includes software licensed by
Motorola from Microsoft Corporation or its affiliate.
The terms also apply to any
ⅷ
ⅷ
ⅷ
ⅷ
updates,
supplements,
Internet-based services, and
support services
for this software, unless other terms accompany those items. If
so, those terms apply.
As described below, using some features also operates as your
consent to the transmission of certain standard computer
information for Internet-based services.
By using the software, including use on this device, you accept
these terms. If you do not accept them, do not use the device or
software. Instead, contact Motorola to determine its return policy
for a refund or credit.
WARNING: If the software contains voice operated technologies,
then operating this software requires user attention. Diverting
attention away from the road while driving can possibly cause an
accident or other serious consequence. Even occasional, short
diversions of attention can be dangerous if your attention is
diverted away from your driving task at a critical time. Motorola
Section 4C: Microsoft End User License Agreement
167
and Microsoft make no representations, warranties or other
determinations that ANY use of this software is legal, safe, or in
any manner recommended or intended while driving or
otherwise operating a motor vehicle.
If you comply with these license terms, you have the rights below.
1. USE RIGHTS.
You may use the software on the device with which you
acquired the software.
2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE
RIGHTS.
a. Specific Use. Motorola designed this device for a specific
use. You may only use the software for that use.
b. Included Microsoft Programs and Additional Required
Licenses. Except as provided below, these license terms
apply to all Microsoft programs included with the
software. If the license terms with any of those programs
give you other rights that do not expressly conflict with
these license terms, you also have those rights.
i. This agreement does not grant you any rights with
respect to the Windows Mobile Device Center,
Microsoft ActiveSync or Microsoft Outlook 2007 Trial
which are subject to the licenses accompanying
those items.
c. Speech Recognition. If the software includes speech
recognition component(s), you understand that speech
recognition is an inherently statistical process and that
recognition errors are inherent in the process. Neither
Motorola nor Microsoft or their suppliers shall be liable
for any damages arising out of errors in the speech
recognition process.
d. Phone Functionality. If the device software includes
phone functionality, all or certain portions of the device
software may be inoperable if you do not have and
maintain a service account with a wireless
telecommunication carrier (“Mobile Operator”), or if the
168
Section 4C: Microsoft End User License Agreement
Mobile Operator’s network is not operating or configured
to operate with the device.
3. SCOPE OF LICENSE. The software is licensed, not sold. This
agreement only gives you some rights to use the software.
Motorola and Microsoft reserve all other rights. Unless
applicable law gives you more rights despite this limitation,
you may use the software only as expressly permitted in this
agreement. In doing so, you must comply with any technical
limitations in the software that allow you to use it only in
certain ways. You may not:
Ⅲ
work around any technical limitations in the software;
reverse engineer, decompile or disassemble the
software;
Ⅲ
Ⅲ
make more copies of the software than specified in this
agreement;
Ⅲ
Ⅲ
Ⅲ
publish the software for others to copy;
rent, lease or lend the software; or
use the software for commercial software hosting
services.
Except as expressly provided in this agreement, rights to
access the software on this device do not give you any right
to implement Microsoft patents or other Microsoft
intellectual property in software or devices that access this
device.
You may use remote access technologies in the software such
as Remote Desktop Mobile to access the software remotely
from a computer or server. You are responsible for obtaining
any licenses required for use of the protocols to access other
software.
4. INTERNET-BASED SERVICES. Microsoft provides Internet-
based services with the software. Microsoft may change or
cancel them at any time.
a. Consent for Internet-Based Services. The software
features described below connect to Microsoft or service
provider computer systems over the Internet. In some
cases, you will not receive a separate notice when they
Section 4C: Microsoft End User License Agreement
169
connect. You may switch off some of these features or
not use them. For more information about these
features,visithttp://go.microsoft.com/fwlink/?LinkId=81931.
By using these features, you consent to the transmission
of this information. Microsoft does not use the
information to identify or contact you.
Device Information. The following features use Internet
protocols, which send to the appropriate systems device
information, such as your Internet protocol address, the
type of operating system, browser and name and version
of the software you are using, and the language code of
the device where you installed the software. Microsoft
uses this information to make the Internet-based
services available to you.
ࡗ Windows Mobile Update Feature. The Windows Mobile Update feature provides you the ability to
obtain and install software updates on your device if
updates are available. You may choose not to use
this feature. Motorola and/or your Mobile Operator
may not support this feature or an update for your
device.
ࡗ Windows Media Digital Rights Management. Content owners use Windows Media digital rights
management technology (WMDRM) to protect their
intellectual property, including copyrights. This
software and third party software use WMDRM to
play and copy WMDRM-protected content. If the
software fails to protect the content, content owners
may ask Microsoft to revoke the software’s ability to
use WMDRM to play or copy protected content.
Revocation does not affect other content. When you
download licenses for protected content, you agree
that Microsoft may include a revocation list with the
licenses. Content owners may require you to
upgrade WMDRM to access their content. Microsoft
software that includes WMDRM will ask for your
170
Section 4C: Microsoft End User License Agreement
consent prior to the upgrade. If you decline an
upgrade, you will not be able to access content that
requires the upgrade.
b. Misuse of Internet-based Services. You may not use these
services in any way that could harm them or impair
anyone else’s use of them. You may not use the services
to try to gain unauthorized access to any service, data,
account or network by any means.
5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The
software may include MPEG-4 visual decoding technology.
This technology is a format for data compression of video
information. MPEG LA, L.L.C. requires this notice:
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES
WITH THE MPEG4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR
INFORMATION (i) GENERATED BY AND OBTAINED
WITHOUT CHARGE FROM A CONSUMER NOT THEREBY
ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY
AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
If you have questions about the MPEG-4 visual standard,
please contact MPEG LA, L.L.C., 250 Steele Street, Suite
300, Denver, CO 80206; www.mpegla.com.
6. DIGITAL CERTIFICATES. The software uses digital certificates
in X.509 format. These digital certificates are used for
authentication.
7. CONNECTIVITY SOFTWARE. Your device package may include
Windows Mobile Device Center or Microsoft ActiveSync
software. If it is included, then you may install and use it in
accordance with the license terms that are provided with it. If
no license terms are provided, then you may install and use
only one (1) copy of the software on a single computer.
8. NETWORK ACCESS. If you are using a network, such as an
employer network, the network administrator may limit
features or functionality on your device.
Section 4C: Microsoft End User License Agreement
171
9. PRODUCT SUPPORT. Contact Motorola for support options.
Refer to the support number provided with the device.
10. LINKS TO THIRD PARTY WEBSITES. If the software provides
links to third party websites, those links are provided to you
only as a convenience, and the inclusion of any link does not
imply an endorsement of the third party website by
Microsoft.
11. BACKUP COPY. You may make one backup copy of the
software. You may use it only to reinstall the software on the
device.
12. PROOF OF LICENSE. If you acquired the software on the
device, or on a disc or other media, a genuine Certificate of
Authenticity label with a genuine copy of the software
identifies licensed software. To be valid, this label must be
affixed to the device, or included on or in Motorola’s software
packaging. If you receive the label separately, it is not valid.
You should keep the label on the device or packaging to prove
that you are licensed to use the software. To identify genuine
Microsoft software, see http://www.howtotell.com.
13. TRANSFER TO A THIRD PARTY. You may transfer the software
these license terms directly to a third party. Before the
transfer, that party must agree that these license terms apply
to the transfer and use of the software. You may not retain
any copies of the software including the backup copy.
14. NOT FAULT TOLERANT. The software is not fault tolerant.
Motorola installed the software on the device and is
responsible for how it operates on the device.
15. RESTRICTED USE. The Microsoft software was designed for
systems that do not require fail-safe performance. You may
not use the Microsoft software in any device or system in
which a malfunction of the software would result in
foreseeable risk of injury or death to any person. This
includes operation of nuclear facilities, aircraft navigation or
communication systems and air traffic control.
172
Section 4C: Microsoft End User License Agreement
16. NO WARRANTIES FOR THE SOFTWARE. The software is
provided “as is”. You bear all risks of using it. Microsoft gives
no express warranties, guarantees or conditions. Any
warranties you receive regarding the device or the software
do not originate from, and are not binding on, Microsoft or its
affiliates. When allowed by your local laws, Motorola and
Microsoft exclude implied warranties of merchantability,
fitness for a particular purpose and non-infringement.
17. LIABILITY LIMITATIONS. You can recover from Microsoft and
its affiliates only direct damages up to fifty U.S. Dollars (U.S.
$50.00), or equivalent in local currency. You cannot recover
any other damages, including consequential, lost profits,
special, indirect or incidental damages.
This limitation applies to:
Ⅲ
anything related to the software, services, content
(including code) on third party internet sites, or third
party programs, and
Ⅲ
claims for breach of contract, breach of warranty,
guarantee or condition, strict liability, negligence, or
other tort to the extent permitted by applicable law.
It also applies even if Microsoft should have been aware of
the possibility of the damages. The above limitation may not
apply to you because your country may not allow the
exclusion or limitation of incidental, consequential or other
damages.
18. EXPORT RESTRICTIONS. The software is subject to United
States export laws and regulations. You must comply with all
domestic and international export laws and regulations that
apply to the software. These laws include restrictions on
destinations, end users and end use. For additional
information, see www.microsoft.com/exporting.
Section 4C: Microsoft End User License Agreement
173
Camera 87–94
Pictures 88
Index
A
Accessories 20
ActiveSync 62
Charger 22
Alerts 47
Answering Calls 45
Audio Enhancement 86
Contacts 103–106
Creating 103
Editing 104
Finding 104
Copying Files 100
B
Background 80
Backlight 81
D
Battery 22–28
Capacity 22
Data Indicator 36
Date 82
Charging 27
Installing 25
Device
Battery Indicator 35
Battery Life 81, 109
Bluetooth 108–110
Locking 43
Off 21
On 21
Unlocking 43
Device (Illus.) 15–17
Device Features 11, 18
Downloading
Email 68
C
Calendar 106–107
Call Forwarding 129
Call Waiting 127
Caller ID 127
Calls 44–53
Files 100
E
Answering 45
Call Forwarding 129
Call Waiting 127
Caller ID 127
Contacts 46
Emergency 47
Ending 45
Email 65–74
Attachments 68
Deleting 66
Deleting an Account 74
Downloading 68
Folders 72
History 49
Hyperlink 46
Making 45
Forwarding 67
New Messages 65
Reading 65
Missed 50
Replying 67
Redialing 53
Sending 69
174
Index
Signatures 70
Owner Information 84
Emergency Calls 47
P
F
Phone Number 40
Picture ID 106
Pictures
File Manager 101
Flight Mode 86
Taking 88
H
Viewing 90
Playing Music 97
Power 21
Profile Indicator 36
Profiles 78, 79
Hearing Aid Compatibility
146, 147
Home Screen 33–37, 80
I
Input Method Editor 57
R
Recent Calls 49
Ring Styles 78
Ring Tones 82
Ring Tones in Contacts 105
Roam Indicator 35
Roaming 76–77
K
Keys 18
L
Language 83
Locking and Unlocking 43
Low Battery Message 35
S
M
Safety
Main Menu 38
Making Calls 45
Media Player 96
Meetings 107
Menu Icons 38
Menus 37, 40
Message Indicator 36
Mobile Device Center 61
Modem 130
medical devices 141
Searching for Contacts 104
Self-Portrait 89
Service
411 7
Account Balance 6
Account Passwords 5
Operator Services 7
Setting Up 2
Music 97
Sprint 411 7
Voicemail 4
N
www.sprint.com 6
Settings 80–84
Signal Strength Indicator 35
SMS Text Messaging 123
Navigating 33–40
O
On Demand 125
Index
175
Softkeys 34
Sounds 81
Voicemail
Menu Key 122
Speakerphone 48
Speed Dial
Message Indicator 36
Options 119
Contacts 51
Deleting 52
Menu Shortcuts 52
Sprint
Customer Service 6
Sprint 411 7
Sprint Customer Service 6
Sprint Voice Command 132–
136
Retrieving 118
Setting Up 4, 117
Volume 41
W
Wallpaper 80
Warranty 159–166
Web Browser 99
Address Book 134
Making a Call 135
Status Icons 35
Synchronizing 59–64
Bluetooth 64
Cable 63
Over the Air 60
Using a Computer 60
T
Text Entry 54–57
Text Messages 123
Three-Way Calling 128
Time 82
Time and Date Style 83
Time Zone 82
Timers 50
V
Videos
Controls 98
Playback Options 93
Playing 92, 97
Recording 91
Voice Recognition 111–113
176
Index
|
